Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 234 insertions, 0 deletions

diff --git a/include/asm-sparc/audioio.h b/include/asm-sparc/audioio.h
new file mode 100644
index 0000000..cf16173
--- /dev/null
+++ b/include/asm-sparc/audioio.h
@@ -0,0 +1,234 @@
+/*
+ * include/asm-sparc/audioio.h
+ *
+ * Sparc Audio Midlayer
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
+ */
+
+#ifndef _AUDIOIO_H_
+#define _AUDIOIO_H_
+
+/*
+ *	SunOS/Solaris /dev/audio interface
+ */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/ioctl.h>
+#endif
+
+/*
+ * This structure contains state information for audio device IO streams.
+ */
+typedef struct audio_prinfo {
+	/*
+	 * The following values describe the audio data encoding.
+	 */
+	unsigned int sample_rate;	/* samples per second */
+	unsigned int channels;	/* number of interleaved channels */
+	unsigned int precision;	/* bit-width of each sample */
+	unsigned int encoding;	/* data encoding method */
+
+	/*
+	 * The following values control audio device configuration
+	 */
+	unsigned int gain;		/* gain level: 0 - 255 */
+	unsigned int port;		/* selected I/O port (see below) */
+	unsigned int avail_ports;	/* available I/O ports (see below) */
+	unsigned int _xxx[2];		/* Reserved for future use */
+
+	unsigned int buffer_size;	/* I/O buffer size */
+
+	/*
+	 * The following values describe driver state
+	 */
+	unsigned int samples;		/* number of samples converted */
+	unsigned int eof;		/* End Of File counter (play only) */
+
+	unsigned char	pause;		/* non-zero for pause, zero to resume */
+	unsigned char	error;		/* non-zero if overflow/underflow */
+	unsigned char	waiting;	/* non-zero if a process wants access */
+	unsigned char balance;	/* stereo channel balance */
+
+	unsigned short minordev;
+
+	/*
+	 * The following values are read-only state flags
+	 */
+	unsigned char open;		/* non-zero if open access permitted */
+	unsigned char active;		/* non-zero if I/O is active */
+} audio_prinfo_t;
+
+
+/*
+ * This structure describes the current state of the audio device.
+ */
+typedef struct audio_info {
+	/*
+	 * Per-stream information
+	 */
+	audio_prinfo_t play;	/* output status information */
+	audio_prinfo_t record;	/* input status information */
+
+	/*
+	 * Per-unit/channel information
+	 */
+	unsigned int monitor_gain;	/* input to output mix: 0 - 255 */
+	unsigned char output_muted;	/* non-zero if output is muted */
+	unsigned char _xxx[3];	/* Reserved for future use */
+	unsigned int _yyy[3];		/* Reserved for future use */
+} audio_info_t;
+
+
+/*
+ * Audio encoding types
+ */
+#define	AUDIO_ENCODING_NONE	(0)	/* no encoding assigned	  */
+#define	AUDIO_ENCODING_ULAW	(1)	/* u-law encoding	  */
+#define	AUDIO_ENCODING_ALAW	(2)	/* A-law encoding	  */
+#define	AUDIO_ENCODING_LINEAR	(3)	/* Linear PCM encoding	  */
+#define AUDIO_ENCODING_FLOAT    (4)     /* IEEE float (-1. <-> +1.) */
+#define	AUDIO_ENCODING_DVI	(104)	/* DVI ADPCM		  */
+#define	AUDIO_ENCODING_LINEAR8	(105)	/* 8 bit UNSIGNED	  */
+#define	AUDIO_ENCODING_LINEARLE	(106)	/* Linear PCM LE encoding */
+
+/*
+ * These ranges apply to record, play, and monitor gain values
+ */
+#define	AUDIO_MIN_GAIN	(0)	/* minimum gain value */
+#define	AUDIO_MAX_GAIN	(255)	/* maximum gain value */
+
+/*
+ * These values apply to the balance field to adjust channel gain values
+ */
+#define	AUDIO_LEFT_BALANCE	(0)	/* left channel only	*/
+#define	AUDIO_MID_BALANCE	(32)	/* equal left/right channel */
+#define	AUDIO_RIGHT_BALANCE	(64)	/* right channel only	*/
+#define	AUDIO_BALANCE_SHIFT	(3)
+
+/*
+ * Generic minimum/maximum limits for number of channels, both modes
+ */
+#define	AUDIO_MIN_PLAY_CHANNELS	(1)
+#define	AUDIO_MAX_PLAY_CHANNELS	(4)
+#define	AUDIO_MIN_REC_CHANNELS	(1)
+#define	AUDIO_MAX_REC_CHANNELS	(4)
+
+/*
+ * Generic minimum/maximum limits for sample precision
+ */
+#define	AUDIO_MIN_PLAY_PRECISION	(8)
+#define	AUDIO_MAX_PLAY_PRECISION	(32)
+#define	AUDIO_MIN_REC_PRECISION		(8)
+#define	AUDIO_MAX_REC_PRECISION		(32)
+
+/*
+ * Define some convenient names for typical audio ports
+ */
+/*
+ * output ports (several may be enabled simultaneously)
+ */
+#define	AUDIO_SPEAKER		0x01	/* output to built-in speaker */
+#define	AUDIO_HEADPHONE		0x02	/* output to headphone jack */
+#define	AUDIO_LINE_OUT		0x04	/* output to line out	 */
+
+/*
+ * input ports (usually only one at a time)
+ */
+#define	AUDIO_MICROPHONE	0x01	/* input from microphone */
+#define	AUDIO_LINE_IN		0x02	/* input from line in	 */
+#define	AUDIO_CD		0x04	/* input from on-board CD inputs */
+#define	AUDIO_INTERNAL_CD_IN	AUDIO_CD	/* input from internal CDROM */
+#define AUDIO_ANALOG_LOOPBACK   0x40    /* input from output */
+
+
+/*
+ * This macro initializes an audio_info structure to 'harmless' values.
+ * Note that (~0) might not be a harmless value for a flag that was
+ * a signed int.
+ */
+#define	AUDIO_INITINFO(i)	{					\
+	unsigned int	*__x__;						\
+	for (__x__ = (unsigned int *)(i);				\
+	    (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t));	\
+	    *__x__++ = ~0);						\
+}
+
+/*
+ * These allow testing for what the user wants to set 
+ */
+#define AUD_INITVALUE   (~0)
+#define Modify(X)       ((unsigned int)(X) != AUD_INITVALUE)
+#define Modifys(X)      ((X) != (unsigned short)AUD_INITVALUE)
+#define Modifyc(X)      ((X) != (unsigned char)AUD_INITVALUE)
+
+/*
+ * Parameter for the AUDIO_GETDEV ioctl to determine current
+ * audio devices.
+ */
+#define	MAX_AUDIO_DEV_LEN	(16)
+typedef struct audio_device {
+	char name[MAX_AUDIO_DEV_LEN];
+	char version[MAX_AUDIO_DEV_LEN];
+	char config[MAX_AUDIO_DEV_LEN];
+} audio_device_t;
+
+
+/*
+ * Ioctl calls for the audio device.
+ */
+
+/*
+ * AUDIO_GETINFO retrieves the current state of the audio device.
+ *
+ * AUDIO_SETINFO copies all fields of the audio_info structure whose
+ * values are not set to the initialized value (-1) to the device state.
+ * It performs an implicit AUDIO_GETINFO to return the new state of the
+ * device.  Note that the record.samples and play.samples fields are set
+ * to the last value before the AUDIO_SETINFO took effect.  This allows
+ * an application to reset the counters while atomically retrieving the
+ * last value.
+ *
+ * AUDIO_DRAIN suspends the calling process until the write buffers are
+ * empty.
+ *
+ * AUDIO_GETDEV returns a structure of type audio_device_t which contains
+ * three strings.  The string "name" is a short identifying string (for
+ * example, the SBus Fcode name string), the string "version" identifies
+ * the current version of the device, and the "config" string identifies
+ * the specific configuration of the audio stream.  All fields are
+ * device-dependent -- see the device specific manual pages for details.
+ *
+ * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined 
+ * herein (making it not too portable)
+ *
+ * AUDIO_FLUSH stops all playback and recording, clears all queued buffers, 
+ * resets error counters, and restarts recording and playback as appropriate
+ * for the current sampling mode.
+ */
+#define	AUDIO_GETINFO	_IOR('A', 1, audio_info_t)
+#define	AUDIO_SETINFO	_IOWR('A', 2, audio_info_t)
+#define	AUDIO_DRAIN	_IO('A', 3)
+#define	AUDIO_GETDEV	_IOR('A', 4, audio_device_t)
+#define	AUDIO_GETDEV_SUNOS	_IOR('A', 4, int)
+#define AUDIO_FLUSH     _IO('A', 5)
+
+/* Define possible audio hardware configurations for 
+ * old SunOS-style AUDIO_GETDEV ioctl */
+#define AUDIO_DEV_UNKNOWN       (0)     /* not defined */
+#define AUDIO_DEV_AMD           (1)     /* audioamd device */
+#define AUDIO_DEV_SPEAKERBOX    (2)     /* dbri device with speakerbox */
+#define AUDIO_DEV_CODEC         (3)     /* dbri device (internal speaker) */
+#define AUDIO_DEV_CS4231        (5)     /* cs4231 device */
+
+/*
+ * The following ioctl sets the audio device into an internal loopback mode,
+ * if the hardware supports this.  The argument is TRUE to set loopback,
+ * FALSE to reset to normal operation.  If the hardware does not support
+ * internal loopback, the ioctl should fail with EINVAL.
+ * Causes ADC data to be digitally mixed in and sent to the DAC.
+ */
+#define	AUDIO_DIAG_LOOPBACK	_IOW('A', 101, int)
+
+#endif /* _AUDIOIO_H_ */