sh: Split out uaccess.h in to _32 and _64 variants.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 3 insertions, 561 deletions

diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h
index 77c391f..ff24ce9 100644
--- a/include/asm-sh/uaccess.h
+++ b/include/asm-sh/uaccess.h
@@ -1,563 +1,5 @@
-/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $
- *
- * User space memory access functions
- *
- * Copyright (C) 1999, 2002  Niibe Yutaka
- * Copyright (C) 2003  Paul Mundt
- *
- *  Based on:
- *     MIPS implementation version 1.15 by
- *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- *     and i386 version.
- */
-#ifndef __ASM_SH_UACCESS_H
-#define __ASM_SH_UACCESS_H
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#define VERIFY_READ    0
-#define VERIFY_WRITE   1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons (Data Segment Register?), these macros are misnamed.
- */
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFFUL)
-#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-#define get_ds()	(KERNEL_DS)
-
-#if !defined(CONFIG_MMU)
-/* NOMMU is always true */
-#define __addr_ok(addr) (1)
-
-static inline mm_segment_t get_fs(void)
-{
-	return USER_DS;
-}
-
-static inline void set_fs(mm_segment_t s)
-{
-}
-
-/*
- * __access_ok: Check if address with size is OK or not.
- *
- * If we don't have an MMU (or if its disabled) the only thing we really have
- * to look out for is if the address resides somewhere outside of what
- * available RAM we have.
- *
- * TODO: This check could probably also stand to be restricted somewhat more..
- * though it still does the Right Thing(tm) for the time being.
- */
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-	return ((addr >= memory_start) && ((addr + size) < memory_end));
-}
-#else /* CONFIG_MMU */
-#define __addr_ok(addr) \
-	((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
-#define get_fs()	(current_thread_info()->addr_limit)
-#define set_fs(x)	(current_thread_info()->addr_limit = (x))
-
-/*
- * __access_ok: Check if address with size is OK or not.
- *
- * Uhhuh, this needs 33-bit arithmetic. We have a carry..
- *
- * sum := addr + size;  carry? --> flag = true;
- * if (sum >= addr_limit) flag = true;
- */
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-	unsigned long flag, sum;
-
-	__asm__("clrt\n\t"
-		"addc	%3, %1\n\t"
-		"movt	%0\n\t"
-		"cmp/hi	%4, %1\n\t"
-		"rotcl	%0"
-		:"=&r" (flag), "=r" (sum)
-		:"1" (addr), "r" (size),
-		 "r" (current_thread_info()->addr_limit.seg)
-		:"t");
-	return flag == 0;
-
-}
-#endif /* CONFIG_MMU */
-
-static inline int access_ok(int type, const void __user *p, unsigned long size)
-{
-	unsigned long addr = (unsigned long)p;
-	return __access_ok(addr, size);
-}
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As SuperH uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr)	__put_user_check((x),(ptr),sizeof(*(ptr)))
-#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) \
-  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-#define __get_user(x,ptr) \
-  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-#define __get_user_size(x,ptr,size,retval)			\
-do {								\
-	retval = 0;						\
-	__chk_user_ptr(ptr);					\
-	switch (size) {						\
-	case 1:							\
-		__get_user_asm(x, ptr, retval, "b");		\
-		break;						\
-	case 2:							\
-		__get_user_asm(x, ptr, retval, "w");		\
-		break;						\
-	case 4:							\
-		__get_user_asm(x, ptr, retval, "l");		\
-		break;						\
-	default:						\
-		__get_user_unknown();				\
-		break;						\
-	}							\
-} while (0)
-
-#define __get_user_nocheck(x,ptr,size)				\
-({								\
-	long __gu_err, __gu_val;				\
-	__get_user_size(__gu_val, (ptr), (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-
-#ifdef CONFIG_MMU
-#define __get_user_check(x,ptr,size)				\
-({								\
-	long __gu_err, __gu_val;				\
-	__chk_user_ptr(ptr);					\
-	switch (size) {						\
-	case 1:							\
-		__get_user_1(__gu_val, (ptr), __gu_err);	\
-		break;						\
-	case 2:							\
-		__get_user_2(__gu_val, (ptr), __gu_err);	\
-		break;						\
-	case 4:							\
-		__get_user_4(__gu_val, (ptr), __gu_err);	\
-		break;						\
-	default:						\
-		__get_user_unknown();				\
-		break;						\
-	}							\
-								\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-
-#define __get_user_1(x,addr,err) ({		\
-__asm__("stc	r7_bank, %1\n\t"		\
-	"mov.l	@(8,%1), %1\n\t"		\
-	"and	%2, %1\n\t"			\
-	"cmp/pz	%1\n\t"				\
-	"bt/s	1f\n\t"				\
-	" mov	#0, %0\n\t"			\
-	"0:\n"					\
-	"mov	#-14, %0\n\t"			\
-	"bra	2f\n\t"				\
-	" mov	#0, %1\n"			\
-	"1:\n\t"				\
-	"mov.b	@%2, %1\n\t"			\
-	"extu.b	%1, %1\n"			\
-	"2:\n"					\
-	".section	__ex_table,\"a\"\n\t"	\
-	".long	1b, 0b\n\t"			\
-	".previous"				\
-	: "=&r" (err), "=&r" (x)		\
-	: "r" (addr)				\
-	: "t");					\
-})
-
-#define __get_user_2(x,addr,err) ({		\
-__asm__("stc	r7_bank, %1\n\t"		\
-	"mov.l	@(8,%1), %1\n\t"		\
-	"and	%2, %1\n\t"			\
-	"cmp/pz	%1\n\t"				\
-	"bt/s	1f\n\t"				\
-	" mov	#0, %0\n\t"			\
-	"0:\n"					\
-	"mov	#-14, %0\n\t"			\
-	"bra	2f\n\t"				\
-	" mov	#0, %1\n"			\
-	"1:\n\t"				\
-	"mov.w	@%2, %1\n\t"			\
-	"extu.w	%1, %1\n"			\
-	"2:\n"					\
-	".section	__ex_table,\"a\"\n\t"	\
-	".long	1b, 0b\n\t"			\
-	".previous"				\
-	: "=&r" (err), "=&r" (x)		\
-	: "r" (addr)				\
-	: "t");					\
-})
-
-#define __get_user_4(x,addr,err) ({		\
-__asm__("stc	r7_bank, %1\n\t"		\
-	"mov.l	@(8,%1), %1\n\t"		\
-	"and	%2, %1\n\t"			\
-	"cmp/pz	%1\n\t"				\
-	"bt/s	1f\n\t"				\
-	" mov	#0, %0\n\t"			\
-	"0:\n"					\
-	"mov	#-14, %0\n\t"			\
-	"bra	2f\n\t"				\
-	" mov	#0, %1\n"			\
-	"1:\n\t"				\
-	"mov.l	@%2, %1\n\t"			\
-	"2:\n"					\
-	".section	__ex_table,\"a\"\n\t"	\
-	".long	1b, 0b\n\t"			\
-	".previous"				\
-	: "=&r" (err), "=&r" (x)		\
-	: "r" (addr)				\
-	: "t");					\
-})
-#else /* CONFIG_MMU */
-#define __get_user_check(x,ptr,size)					\
-({									\
-	long __gu_err, __gu_val;					\
-	if (__access_ok((unsigned long)(ptr), (size))) {		\
-		__get_user_size(__gu_val, (ptr), (size), __gu_err);	\
-		(x) = (__typeof__(*(ptr)))__gu_val;			\
-	} else								\
-		__gu_err = -EFAULT;					\
-	__gu_err;							\
-})
-#endif
-
-#define __get_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov." insn "	%2, %1\n\t" \
-	"mov	#0, %0\n" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"mov	#0, %1\n\t" \
-	"mov.l	4f, %0\n\t" \
-	"jmp	@%0\n\t" \
-	" mov	%3, %0\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	:"=&r" (err), "=&r" (x) \
-	:"m" (__m(addr)), "i" (-EFAULT)); })
-
-extern void __get_user_unknown(void);
-
-#define __put_user_size(x,ptr,size,retval)		\
-do {							\
-	retval = 0;					\
-	__chk_user_ptr(ptr);				\
-	switch (size) {					\
-	case 1:						\
-		__put_user_asm(x, ptr, retval, "b");	\
-		break;					\
-	case 2:						\
-		__put_user_asm(x, ptr, retval, "w");	\
-		break;					\
-	case 4:						\
-		__put_user_asm(x, ptr, retval, "l");	\
-		break;					\
-	case 8:						\
-		__put_user_u64(x, ptr, retval);		\
-		break;					\
-	default:					\
-		__put_user_unknown();			\
-	}						\
-} while (0)
-
-#define __put_user_nocheck(x,ptr,size)			\
-({							\
-	long __pu_err;					\
-	__put_user_size((x),(ptr),(size),__pu_err);	\
-	__pu_err;					\
-})
-
-#define __put_user_check(x,ptr,size)				\
-({								\
-	long __pu_err = -EFAULT;				\
-	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-								\
-	if (__access_ok((unsigned long)__pu_addr,size))		\
-		__put_user_size((x),__pu_addr,(size),__pu_err);	\
-	__pu_err;						\
-})
-
-#define __put_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov." insn "	%1, %2\n\t" \
-	"mov	#0, %0\n" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"nop\n\t" \
-	"mov.l	4f, %0\n\t" \
-	"jmp	@%0\n\t" \
-	"mov	%3, %0\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	:"=&r" (err) \
-	:"r" (x), "m" (__m(addr)), "i" (-EFAULT) \
-        :"memory"); })
-
-#if defined(__LITTLE_ENDIAN__)
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov.l	%R1,%2\n\t" \
-	"mov.l	%S1,%T2\n\t" \
-	"mov	#0,%0\n" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"nop\n\t" \
-	"mov.l	4f,%0\n\t" \
-	"jmp	@%0\n\t" \
-	" mov	%3,%0\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	: "=r" (retval) \
-	: "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
-        : "memory"); })
+#ifdef CONFIG_SUPERH32
+# include "uaccess_32.h"
 #else
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov.l	%S1,%2\n\t" \
-	"mov.l	%R1,%T2\n\t" \
-	"mov	#0,%0\n" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"nop\n\t" \
-	"mov.l	4f,%0\n\t" \
-	"jmp	@%0\n\t" \
-	" mov	%3,%0\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	: "=r" (retval) \
-	: "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
-        : "memory"); })
+# include "uaccess_64.h"
 #endif
-
-extern void __put_user_unknown(void);
-
-/* Generic arbitrary sized copy.  */
-/* Return the number of bytes NOT copied */
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
-
-#define copy_to_user(to,from,n) ({ \
-void *__copy_to = (void *) (to); \
-__kernel_size_t __copy_size = (__kernel_size_t) (n); \
-__kernel_size_t __copy_res; \
-if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \
-__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \
-} else __copy_res = __copy_size; \
-__copy_res; })
-
-#define copy_from_user(to,from,n) ({ \
-void *__copy_to = (void *) (to); \
-void *__copy_from = (void *) (from); \
-__kernel_size_t __copy_size = (__kernel_size_t) (n); \
-__kernel_size_t __copy_res; \
-if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \
-__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \
-} else __copy_res = __copy_size; \
-__copy_res; })
-
-static __always_inline unsigned long
-__copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	return __copy_user(to, (__force void *)from, n);
-}
-
-static __always_inline unsigned long __must_check
-__copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	return __copy_user((__force void *)to, from, n);
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/*
- * Clear the area and return remaining number of bytes
- * (on failure.  Usually it's 0.)
- */
-extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) ({ \
-void * __cl_addr = (addr); \
-unsigned long __cl_size = (n); \
-if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
-__cl_size = __clear_user(__cl_addr, __cl_size); \
-__cl_size; })
-
-static __inline__ int
-__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
-{
-	__kernel_size_t res;
-	unsigned long __dummy, _d, _s;
-
-	__asm__ __volatile__(
-		"9:\n"
-		"mov.b	@%2+, %1\n\t"
-		"cmp/eq	#0, %1\n\t"
-		"bt/s	2f\n"
-		"1:\n"
-		"mov.b	%1, @%3\n\t"
-		"dt	%7\n\t"
-		"bf/s	9b\n\t"
-		" add	#1, %3\n\t"
-		"2:\n\t"
-		"sub	%7, %0\n"
-		"3:\n"
-		".section .fixup,\"ax\"\n"
-		"4:\n\t"
-		"mov.l	5f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	%8, %0\n\t"
-		".balign 4\n"
-		"5:	.long 3b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 9b,4b\n"
-		".previous"
-		: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d)
-		: "0" (__count), "2" (__src), "3" (__dest), "r" (__count),
-		  "i" (-EFAULT)
-		: "memory", "t");
-
-	return res;
-}
-
-#define strncpy_from_user(dest,src,count) ({ \
-unsigned long __sfu_src = (unsigned long) (src); \
-int __sfu_count = (int) (count); \
-long __sfu_res = -EFAULT; \
-if(__access_ok(__sfu_src, __sfu_count)) { \
-__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
-} __sfu_res; })
-
-/*
- * Return the size of a string (including the ending 0!)
- */
-static __inline__ long __strnlen_user(const char __user *__s, long __n)
-{
-	unsigned long res;
-	unsigned long __dummy;
-
-	__asm__ __volatile__(
-		"9:\n"
-		"cmp/eq	%4, %0\n\t"
-		"bt	2f\n"
-		"1:\t"
-		"mov.b	@(%0,%3), %1\n\t"
-		"tst	%1, %1\n\t"
-		"bf/s	9b\n\t"
-		" add	#1, %0\n"
-		"2:\n"
-		".section .fixup,\"ax\"\n"
-		"3:\n\t"
-		"mov.l	4f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	#0, %0\n"
-		".balign 4\n"
-		"4:	.long 2b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 1b,3b\n"
-		".previous"
-		: "=z" (res), "=&r" (__dummy)
-		: "0" (0), "r" (__s), "r" (__n)
-		: "t");
-	return res;
-}
-
-static __inline__ long strnlen_user(const char __user *s, long n)
-{
-	if (!__addr_ok(s))
-		return 0;
-	else
-		return __strnlen_user(s, n);
-}
-
-#define strlen_user(str)	strnlen_user(str, ~0UL >> 1)
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-#endif /* __ASM_SH_UACCESS_H */