MIPS: Move headfiles to new location below arch/mips/include

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 310 deletions

diff --git a/include/asm-mips/jazz.h b/include/asm-mips/jazz.h
deleted file mode 100644
index 83f449d..0000000
--- a/include/asm-mips/jazz.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle
- */
-#ifndef __ASM_JAZZ_H
-#define __ASM_JAZZ_H
-
-/*
- * The addresses below are virtual address. The mappings are
- * created on startup via wired entries in the tlb. The Mips
- * Magnum R3000 and R4000 machines are similar in many aspects,
- * but many hardware register are accessible at 0xb9000000 in
- * instead of 0xe0000000.
- */
-
-#define JAZZ_LOCAL_IO_SPACE     0xe0000000
-
-/*
- * Revision numbers in PICA_ASIC_REVISION
- *
- * 0xf0000000 - Rev1
- * 0xf0000001 - Rev2
- * 0xf0000002 - Rev3
- */
-#define PICA_ASIC_REVISION      0xe0000008
-
-/*
- * The segments of the seven segment LED are mapped
- * to the control bits as follows:
- *
- *         (7)
- *      ---------
- *      |       |
- *  (2) |       | (6)
- *      |  (1)  |
- *      ---------
- *      |       |
- *  (3) |       | (5)
- *      |  (4)  |
- *      --------- . (0)
- */
-#define PICA_LED                0xe000f000
-
-/*
- * Some characters for the LED control registers
- * The original Mips machines seem to have a LED display
- * with integrated decoder while the Acer machines can
- * control each of the seven segments and the dot independently.
- * It's only a toy, anyway...
- */
-#define LED_DOT                 0x01
-#define LED_SPACE               0x00
-#define LED_0                   0xfc
-#define LED_1                   0x60
-#define LED_2                   0xda
-#define LED_3                   0xf2
-#define LED_4                   0x66
-#define LED_5                   0xb6
-#define LED_6                   0xbe
-#define LED_7                   0xe0
-#define LED_8                   0xfe
-#define LED_9                   0xf6
-#define LED_A                   0xee
-#define LED_b                   0x3e
-#define LED_C                   0x9c
-#define LED_d                   0x7a
-#define LED_E                   0x9e
-#define LED_F                   0x8e
-
-#ifndef __ASSEMBLY__
-
-static __inline__ void pica_set_led(unsigned int bits)
-{
-	volatile unsigned int *led_register = (unsigned int *) PICA_LED;
-
-	*led_register = bits;
-}
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * Base address of the Sonic Ethernet adapter in Jazz machines.
- */
-#define JAZZ_ETHERNET_BASE  0xe0001000
-
-/*
- * Base address of the 53C94 SCSI hostadapter in Jazz machines.
- */
-#define JAZZ_SCSI_BASE		0xe0002000
-
-/*
- * i8042 keyboard controller for JAZZ and PICA chipsets.
- * This address is just a guess and seems to differ from
- * other mips machines such as RC3xxx...
- */
-#define JAZZ_KEYBOARD_ADDRESS   0xe0005000
-#define JAZZ_KEYBOARD_DATA      0xe0005000
-#define JAZZ_KEYBOARD_COMMAND   0xe0005001
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned char data;
-	unsigned char command;
-} jazz_keyboard_hardware;
-
-#define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS)
-
-typedef struct {
-	unsigned char pad0[3];
-	unsigned char data;
-	unsigned char pad1[3];
-	unsigned char command;
-} mips_keyboard_hardware;
-
-/*
- * For now. Needs to be changed for RC3xxx support. See below.
- */
-#define keyboard_hardware       jazz_keyboard_hardware
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * i8042 keyboard controller for most other Mips machines.
- */
-#define MIPS_KEYBOARD_ADDRESS   0xb9005000
-#define MIPS_KEYBOARD_DATA      0xb9005003
-#define MIPS_KEYBOARD_COMMAND   0xb9005007
-
-/*
- * Serial and parallel ports (WD 16C552) on the Mips JAZZ
- */
-#define JAZZ_SERIAL1_BASE       (unsigned int)0xe0006000
-#define JAZZ_SERIAL2_BASE       (unsigned int)0xe0007000
-#define JAZZ_PARALLEL_BASE      (unsigned int)0xe0008000
-
-/*
- * Dummy Device Address. Used in jazzdma.c
- */
-#define JAZZ_DUMMY_DEVICE       0xe000d000
-
-/*
- * JAZZ timer registers and interrupt no.
- * Note that the hardware timer interrupt is actually on
- * cpu level 6, but to keep compatibility with PC stuff
- * it is remapped to vector 0. See arch/mips/kernel/entry.S.
- */
-#define JAZZ_TIMER_INTERVAL     0xe0000228
-#define JAZZ_TIMER_REGISTER     0xe0000230
-
-/*
- * DRAM configuration register
- */
-#ifndef __ASSEMBLY__
-#ifdef __MIPSEL__
-typedef struct {
-	unsigned int bank2 : 3;
-	unsigned int bank1 : 3;
-	unsigned int mem_bus_width : 1;
-	unsigned int reserved2 : 1;
-	unsigned int page_mode : 1;
-	unsigned int reserved1 : 23;
-} dram_configuration;
-#else /* defined (__MIPSEB__) */
-typedef struct {
-	unsigned int reserved1 : 23;
-	unsigned int page_mode : 1;
-	unsigned int reserved2 : 1;
-	unsigned int mem_bus_width : 1;
-	unsigned int bank1 : 3;
-	unsigned int bank2 : 3;
-} dram_configuration;
-#endif
-#endif /* !__ASSEMBLY__ */
-
-#define PICA_DRAM_CONFIG        0xe00fffe0
-
-/*
- * JAZZ interrupt control registers
- */
-#define JAZZ_IO_IRQ_SOURCE      0xe0010000
-#define JAZZ_IO_IRQ_ENABLE      0xe0010002
-
-/*
- * JAZZ Interrupt Level definitions
- *
- * This is somewhat broken.  For reasons which nobody can remember anymore
- * we remap the Jazz interrupts to the usual ISA style interrupt numbers.
- */
-#define JAZZ_IRQ_START          24
-#define JAZZ_IRQ_END            (24 + 9)
-#define JAZZ_PARALLEL_IRQ       (JAZZ_IRQ_START + 0)
-#define JAZZ_FLOPPY_IRQ         (JAZZ_IRQ_START + 1)
-#define JAZZ_SOUND_IRQ          (JAZZ_IRQ_START + 2)
-#define JAZZ_VIDEO_IRQ          (JAZZ_IRQ_START + 3)
-#define JAZZ_ETHERNET_IRQ       (JAZZ_IRQ_START + 4)
-#define JAZZ_SCSI_IRQ           (JAZZ_IRQ_START + 5)
-#define JAZZ_KEYBOARD_IRQ       (JAZZ_IRQ_START + 6)
-#define JAZZ_MOUSE_IRQ          (JAZZ_IRQ_START + 7)
-#define JAZZ_SERIAL1_IRQ        (JAZZ_IRQ_START + 8)
-#define JAZZ_SERIAL2_IRQ        (JAZZ_IRQ_START + 9)
-
-#define JAZZ_TIMER_IRQ          (MIPS_CPU_IRQ_BASE+6)
-
-
-/*
- * JAZZ DMA Channels
- * Note: Channels 4...7 are not used with respect to the Acer PICA-61
- * chipset which does not provide these DMA channels.
- */
-#define JAZZ_SCSI_DMA           0              /* SCSI */
-#define JAZZ_FLOPPY_DMA         1              /* FLOPPY */
-#define JAZZ_AUDIOL_DMA         2              /* AUDIO L */
-#define JAZZ_AUDIOR_DMA         3              /* AUDIO R */
-
-/*
- * JAZZ R4030 MCT_ADR chip (DMA controller)
- * Note: Virtual Addresses !
- */
-#define JAZZ_R4030_CONFIG	0xE0000000	/* R4030 config register */
-#define JAZZ_R4030_REVISION     0xE0000008	/* same as PICA_ASIC_REVISION */
-#define JAZZ_R4030_INV_ADDR	0xE0000010	/* Invalid Address register */
-
-#define JAZZ_R4030_TRSTBL_BASE  0xE0000018	/* Translation Table Base */
-#define JAZZ_R4030_TRSTBL_LIM   0xE0000020	/* Translation Table Limit */
-#define JAZZ_R4030_TRSTBL_INV   0xE0000028	/* Translation Table Invalidate */
-
-#define JAZZ_R4030_CACHE_MTNC   0xE0000030	/* Cache Maintenance */
-#define JAZZ_R4030_R_FAIL_ADDR  0xE0000038	/* Remote Failed Address */
-#define JAZZ_R4030_M_FAIL_ADDR  0xE0000040	/* Memory Failed Address */
-
-#define JAZZ_R4030_CACHE_PTAG   0xE0000048	/* I/O Cache Physical Tag */
-#define JAZZ_R4030_CACHE_LTAG   0xE0000050	/* I/O Cache Logical Tag */
-#define JAZZ_R4030_CACHE_BMASK  0xE0000058	/* I/O Cache Byte Mask */
-#define JAZZ_R4030_CACHE_BWIN   0xE0000060	/* I/O Cache Buffer Window */
-
-/*
- * Remote Speed Registers.
- *
- *  0: free,      1: Ethernet,  2: SCSI,      3: Floppy,
- *  4: RTC,       5: Kb./Mouse  6: serial 1,  7: serial 2,
- *  8: parallel,  9: NVRAM,    10: CPU,      11: PROM,
- * 12: reserved, 13: free,     14: 7seg LED, 15: ???
- */
-#define JAZZ_R4030_REM_SPEED	0xE0000070	/* 16 Remote Speed Registers */
-						/* 0xE0000070,78,80... 0xE00000E8 */
-#define JAZZ_R4030_IRQ_ENABLE   0xE00000E8	/* Internal Interrupt Enable */
-#define JAZZ_R4030_INVAL_ADDR   0xE0000010	/* Invalid address Register */
-#define JAZZ_R4030_IRQ_SOURCE   0xE0000200	/* Interrupt Source Register */
-#define JAZZ_R4030_I386_ERROR   0xE0000208	/* i386/EISA Bus Error */
-
-/*
- * Virtual (E)ISA controller address
- */
-#define JAZZ_EISA_IRQ_ACK	0xE0000238	/* EISA interrupt acknowledge */
-
-/*
- * Access the R4030 DMA and I/O Controller
- */
-#ifndef __ASSEMBLY__
-
-static inline void r4030_delay(void)
-{
-__asm__ __volatile__(
-	".set\tnoreorder\n\t"
-	"nop\n\t"
-	"nop\n\t"
-	"nop\n\t"
-	"nop\n\t"
-	".set\treorder");
-}
-
-static inline unsigned short r4030_read_reg16(unsigned long addr)
-{
-	unsigned short ret = *((volatile unsigned short *)addr);
-	r4030_delay();
-	return ret;
-}
-
-static inline unsigned int r4030_read_reg32(unsigned long addr)
-{
-	unsigned int ret = *((volatile unsigned int *)addr);
-	r4030_delay();
-	return ret;
-}
-
-static inline void r4030_write_reg16(unsigned long addr, unsigned val)
-{
-	*((volatile unsigned short *)addr) = val;
-	r4030_delay();
-}
-
-static inline void r4030_write_reg32(unsigned long addr, unsigned val)
-{
-	*((volatile unsigned int *)addr) = val;
-	r4030_delay();
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#define JAZZ_FDC_BASE	0xe0003000
-#define JAZZ_RTC_BASE	0xe0004000
-#define JAZZ_PORT_BASE	0xe2000000
-
-#define JAZZ_EISA_BASE	0xe3000000
-
-#endif /* __ASM_JAZZ_H */