Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 113 insertions, 0 deletions

diff --git a/include/asm-i386/hpet.h b/include/asm-i386/hpet.h
new file mode 100644
index 0000000..6e20b07
--- /dev/null
+++ b/include/asm-i386/hpet.h
@@ -0,0 +1,113 @@
+
+#ifndef _I386_HPET_H
+#define _I386_HPET_H
+
+#ifdef CONFIG_HPET_TIMER
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/irq.h>
+#include <asm/msr.h>
+#include <asm/delay.h>
+#include <asm/mpspec.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+
+#include <linux/timex.h>
+#include <linux/config.h>
+
+#include <asm/fixmap.h>
+
+/*
+ * Documentation on HPET can be found at:
+ *      http://www.intel.com/ial/home/sp/pcmmspec.htm
+ *      ftp://download.intel.com/ial/home/sp/mmts098.pdf
+ */
+
+#define HPET_MMAP_SIZE	1024
+
+#define HPET_ID		0x000
+#define HPET_PERIOD	0x004
+#define HPET_CFG	0x010
+#define HPET_STATUS	0x020
+#define HPET_COUNTER	0x0f0
+#define HPET_T0_CFG	0x100
+#define HPET_T0_CMP	0x108
+#define HPET_T0_ROUTE	0x110
+#define HPET_T1_CFG	0x120
+#define HPET_T1_CMP	0x128
+#define HPET_T1_ROUTE	0x130
+#define HPET_T2_CFG	0x140
+#define HPET_T2_CMP	0x148
+#define HPET_T2_ROUTE	0x150
+
+#define HPET_ID_LEGSUP	0x00008000
+#define HPET_ID_NUMBER	0x00001f00
+#define HPET_ID_REV	0x000000ff
+#define	HPET_ID_NUMBER_SHIFT	8
+
+#define HPET_CFG_ENABLE	0x001
+#define HPET_CFG_LEGACY	0x002
+#define	HPET_LEGACY_8254	2
+#define	HPET_LEGACY_RTC		8
+
+#define HPET_TN_ENABLE		0x004
+#define HPET_TN_PERIODIC	0x008
+#define HPET_TN_PERIODIC_CAP	0x010
+#define HPET_TN_SETVAL		0x040
+#define HPET_TN_32BIT		0x100
+
+/* Use our own asm for 64 bit multiply/divide */
+#define ASM_MUL64_REG(eax_out,edx_out,reg_in,eax_in) 			\
+		__asm__ __volatile__("mull %2" 				\
+				:"=a" (eax_out), "=d" (edx_out) 	\
+				:"r" (reg_in), "0" (eax_in))
+
+#define ASM_DIV64_REG(eax_out,edx_out,reg_in,eax_in,edx_in) 		\
+		__asm__ __volatile__("divl %2" 				\
+				:"=a" (eax_out), "=d" (edx_out) 	\
+				:"r" (reg_in), "0" (eax_in), "1" (edx_in))
+
+#define KERNEL_TICK_USEC 	(1000000UL/HZ)	/* tick value in microsec */
+/* Max HPET Period is 10^8 femto sec as in HPET spec */
+#define HPET_MAX_PERIOD (100000000UL)
+/*
+ * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
+ * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
+ */
+#define HPET_MIN_PERIOD (100000UL)
+
+extern unsigned long hpet_tick;  	/* hpet clks count per tick */
+extern unsigned long hpet_address;	/* hpet memory map physical address */
+
+extern int hpet_rtc_timer_init(void);
+extern int hpet_enable(void);
+extern int hpet_reenable(void);
+extern int is_hpet_enabled(void);
+extern int is_hpet_capable(void);
+extern int hpet_readl(unsigned long a);
+
+#ifdef CONFIG_HPET_EMULATE_RTC
+extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec);
+extern int hpet_set_periodic_freq(unsigned long freq);
+extern int hpet_rtc_dropped_irq(void);
+extern int hpet_rtc_timer_init(void);
+extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+#endif /* CONFIG_HPET_EMULATE_RTC */
+#endif /* CONFIG_HPET_TIMER */
+#endif /* _I386_HPET_H */