[ARM] S3C24XX: Additional include moves

Continue moving the include files into arch/arm

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

7 files changed, 0 insertions, 445 deletions

diff --git a/include/asm-arm/plat-s3c/map.h b/include/asm-arm/plat-s3c/map.h
deleted file mode 100644
index b84289d..0000000
--- a/include/asm-arm/plat-s3c/map.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/map.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - Memory map definitions (virtual addresses)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_MAP_H
-#define __ASM_PLAT_MAP_H __FILE__
-
-/* Fit all our registers in at 0xF4000000 upwards, trying to use as
- * little of the VA space as possible so vmalloc and friends have a
- * better chance of getting memory.
- *
- * we try to ensure stuff like the IRQ registers are available for
- * an single MOVS instruction (ie, only 8 bits of set data)
- */
-
-#define S3C_ADDR_BASE	(0xF4000000)
-
-#ifndef __ASSEMBLY__
-#define S3C_ADDR(x)	((void __iomem __force *)S3C_ADDR_BASE + (x))
-#else
-#define S3C_ADDR(x)	(S3C_ADDR_BASE + (x))
-#endif
-
-#define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
-#define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
-#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* system control */
-#define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
-#define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
-#define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
-
-#endif /* __ASM_PLAT_MAP_H */
diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h
deleted file mode 100644
index 4323ccc..0000000
--- a/include/asm-arm/plat-s3c/regs-adc.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
- *
- * Copyright (c) 2004 Shannon Holland <holland@loser.net>
- *
- * This program is free software; yosu can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 ADC registers
-*/
-
-#ifndef __ASM_ARCH_REGS_ADC_H
-#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
-
-#define S3C2410_ADCREG(x) (x)
-
-#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
-#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
-#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
-#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
-#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
-
-
-/* ADCCON Register Bits */
-#define S3C2410_ADCCON_ECFLG		(1<<15)
-#define S3C2410_ADCCON_PRSCEN		(1<<14)
-#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
-#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
-#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
-#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
-#define S3C2410_ADCCON_STDBM		(1<<2)
-#define S3C2410_ADCCON_READ_START	(1<<1)
-#define S3C2410_ADCCON_ENABLE_START	(1<<0)
-#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
-
-
-/* ADCTSC Register Bits */
-#define S3C2410_ADCTSC_YM_SEN		(1<<7)
-#define S3C2410_ADCTSC_YP_SEN		(1<<6)
-#define S3C2410_ADCTSC_XM_SEN		(1<<5)
-#define S3C2410_ADCTSC_XP_SEN		(1<<4)
-#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
-#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
-#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
-
-/* ADCDAT0 Bits */
-#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
-
-/* ADCDAT1 Bits */
-#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
-
-#endif /* __ASM_ARCH_REGS_ADC_H */
-
-
diff --git a/include/asm-arm/plat-s3c/uncompress.h b/include/asm-arm/plat-s3c/uncompress.h
deleted file mode 100644
index 4df006b..0000000
--- a/include/asm-arm/plat-s3c/uncompress.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/uncompress.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_UNCOMPRESS_H
-#define __ASM_PLAT_UNCOMPRESS_H
-
-typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
-
-/* uart setup */
-
-static unsigned int fifo_mask;
-static unsigned int fifo_max;
-
-/* forward declerations */
-
-static void arch_detect_cpu(void);
-
-/* defines for UART registers */
-
-#include <plat/regs-serial.h>
-#include <asm/plat-s3c/regs-watchdog.h>
-
-/* working in physical space... */
-#undef S3C2410_WDOGREG
-#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
-
-/* how many bytes we allow into the FIFO at a time in FIFO mode */
-#define FIFO_MAX	 (14)
-
-#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT)
-
-static __inline__ void
-uart_wr(unsigned int reg, unsigned int val)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	*ptr = val;
-}
-
-static __inline__ unsigned int
-uart_rd(unsigned int reg)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	return *ptr;
-}
-
-/* we can deal with the case the UARTs are being run
- * in FIFO mode, so that we don't hold up our execution
- * waiting for tx to happen...
-*/
-
-static void putc(int ch)
-{
-	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
-		int level;
-
-		while (1) {
-			level = uart_rd(S3C2410_UFSTAT);
-			level &= fifo_mask;
-
-			if (level < fifo_max)
-				break;
-		}
-
-	} else {
-		/* not using fifos */
-
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
-			barrier();
-	}
-
-	/* write byte to transmission register */
-	uart_wr(S3C2410_UTXH, ch);
-}
-
-static inline void flush(void)
-{
-}
-
-#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
-
-/* CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
-*/
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
-
-#ifdef CONFIG_S3C_BOOT_ERROR_RESET
-
-static void arch_decomp_error(const char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System resetting\n");
-
-	__raw_writel(0x4000, S3C2410_WTDAT);
-	__raw_writel(0x4000, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
-
-	while(1);
-}
-
-#define arch_error arch_decomp_error
-#endif
-
-static void error(char *err);
-
-static void
-arch_decomp_setup(void)
-{
-	/* we may need to setup the uart(s) here if we are not running
-	 * on an BAST... the BAST will have left the uarts configured
-	 * after calling linux.
-	 */
-
-	arch_detect_cpu();
-	arch_decomp_wdog_start();
-}
-
-
-#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/include/asm-arm/plat-s3c24xx/clock.h b/include/asm-arm/plat-s3c24xx/clock.h
deleted file mode 100644
index 235b753..0000000
--- a/include/asm-arm/plat-s3c24xx/clock.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/clock.h
- * linux/arch/arm/mach-s3c2410/clock.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct clk {
-	struct list_head      list;
-	struct module        *owner;
-	struct clk           *parent;
-	const char           *name;
-	int		      id;
-	int		      usage;
-	unsigned long         rate;
-	unsigned long         ctrlbit;
-
-	int		    (*enable)(struct clk *, int enable);
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
-};
-
-/* other clocks which may be registered by board support */
-
-extern struct clk s3c24xx_dclk0;
-extern struct clk s3c24xx_dclk1;
-extern struct clk s3c24xx_clkout0;
-extern struct clk s3c24xx_clkout1;
-extern struct clk s3c24xx_uclk;
-
-extern struct clk clk_usb_bus;
-
-/* core clock support */
-
-extern struct clk clk_f;
-extern struct clk clk_h;
-extern struct clk clk_p;
-extern struct clk clk_mpll;
-extern struct clk clk_upll;
-extern struct clk clk_xtal;
-
-/* exports for arch/arm/mach-s3c2410
- *
- * Please DO NOT use these outside of arch/arm/mach-s3c2410
-*/
-
-extern struct mutex clocks_mutex;
-
-extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
-
-extern int s3c24xx_register_clock(struct clk *clk);
-extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
-
-extern int s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk);
diff --git a/include/asm-arm/plat-s3c24xx/common-smdk.h b/include/asm-arm/plat-s3c24xx/common-smdk.h
deleted file mode 100644
index 58d9094..0000000
--- a/include/asm-arm/plat-s3c24xx/common-smdk.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void smdk_machine_init(void);
diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
deleted file mode 100644
index c78efe3..0000000
--- a/include/asm-arm/plat-s3c24xx/dma.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/dma.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-#define DMA_CH_VALID		(1<<31)
-#define DMA_CH_NEVER		(1<<30)
-
-struct s3c24xx_dma_addr {
-	unsigned long		from;
-	unsigned long		to;
-};
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
-	const char		*name;
-	struct s3c24xx_dma_addr  hw_addr;
-
-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
-	struct s3c24xx_dma_map	*map;
-	unsigned long		 map_size;
-	unsigned long		 dcon_mask;
-
-	void	(*select)(struct s3c2410_dma_chan *chan,
-			  struct s3c24xx_dma_map *map);
-
-	void	(*direction)(struct s3c2410_dma_chan *chan,
-			     struct s3c24xx_dma_map *map,
-			     enum s3c2410_dmasrc dir);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
-
-/* struct s3c24xx_dma_order_ch
- *
- * channel map for one of the `enum dma_ch` dma channels. the list
- * entry contains a set of low-level channel numbers, orred with
- * DMA_CH_VALID, which are checked in the order in the array.
-*/
-
-struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
-	unsigned int	flags;				/* flags */
-};
-
-/* struct s3c24xx_dma_order
- *
- * information provided by either the core or the board to give the
- * dma system a hint on how to allocate channels
-*/
-
-struct s3c24xx_dma_order {
-	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
-};
-
-extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
-
-/* DMA init code, called from the cpu support code */
-
-extern int s3c2410_dma_init(void);
-
-extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
-			    unsigned int stride);
diff --git a/include/asm-arm/plat-s3c24xx/s3c2412.h b/include/asm-arm/plat-s3c24xx/s3c2412.h
deleted file mode 100644
index 3ec9768..0000000
--- a/include/asm-arm/plat-s3c24xx/s3c2412.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern  int s3c2412_init(void);
-
-extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern  int s3c2412_baseclk_add(void);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#endif