[ARM] 3592/1: AT91RM9200 Serial driver update

Patch from Andrew Victor

This patch includes a number of updates to the AT91RM9200 serial driver.

Changes include:
1. Conversion to a platform_driver.  [Ivan Kokshaysky]
2. Replaced all references to AT91RM9200 with AT91.  This driver can now
also be used for the AT91SAM9216.
3. Allow TIOCM_LOOP to configure local loopback mode.
4. Cleaned up the 'read_status_mask' usage and interrupt handler code.
[Chip Coldwell]
5. Suspend/resume support.  [David Brownell]

There are a few 'unused variable' warning when compiling this - I
removed the new DMA support to keep this first patch simpler.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 3 insertions, 5 deletions

diff --git a/include/asm-arm/mach/serial_at91rm9200.h b/include/asm-arm/mach/serial_at91.h
index 98f4b0c..18bc4e0 100644
--- a/include/asm-arm/mach/serial_at91rm9200.h
+++ b/include/asm-arm/mach/serial_at91.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/serial_at91rm9200.h
+ *  linux/include/asm-arm/mach/serial_at91.h
  *
  *  Based on serial_sa1100.h  by Nicolas Pitre
  *
@@ -15,7 +15,7 @@ struct uart_port;
  * This is a temporary structure for registering these
  * functions; it is intended to be discarded after boot.
  */
-struct at91rm9200_port_fns {
+struct at91_port_fns {
 	void	(*set_mctrl)(struct uart_port *, u_int);
 	u_int	(*get_mctrl)(struct uart_port *);
 	void	(*enable_ms)(struct uart_port *);
@@ -26,11 +26,9 @@ struct at91rm9200_port_fns {
 };
 
 #if defined(CONFIG_SERIAL_AT91)
-void at91_register_uart_fns(struct at91rm9200_port_fns *fns);
-void at91_register_uart(int idx, int port);
+void at91_register_uart_fns(struct at91_port_fns *fns);
 #else
 #define at91_register_uart_fns(fns) do { } while (0)
-#define at91_register_uart(idx,port) do { } while (0)
 #endif