ore: Fix wrong math in allocation of per device BIO

At IO preparation we calculate the max pages at each device and
allocate a BIO per device of that size. The calculation was wrong
on some unaligned corner cases offset/length combination and would
make prepare return with -ENOMEM. This would be bad for pnfs-objects
that would in that case IO through MDS. And fatal for exofs were it
would fail writes with EIO.

Fix it by doing the proper math, that will work in all cases. (I
ran a test with all possible offset/length combinations this time
round).

Also when reading we do not need to allocate for the parity units
since we jump over them.

Also lower the max_io_length to take into account the parity pages
so not to allocate BIOs bigger than PAGE_SIZE

CC: Stable Kernel <stable@vger.kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

1 files changed, 25 insertions, 12 deletions

diff --git a/fs/exofs/ore.c b/fs/exofs/ore.c
index b744228..85cde3e 100644
--- a/fs/exofs/ore.c
+++ b/fs/exofs/ore.c
@@ -103,7 +103,7 @@ int ore_verify_layout(unsigned total_comps, struct ore_layout *layout)
 
 	layout->max_io_length =
 		(BIO_MAX_PAGES_KMALLOC * PAGE_SIZE - layout->stripe_unit) *
-							layout->group_width;
+					(layout->group_width - layout->parity);
 	if (layout->parity) {
 		unsigned stripe_length =
 				(layout->group_width - layout->parity) *
@@ -286,7 +286,8 @@ int  ore_get_rw_state(struct ore_layout *layout, struct ore_components *oc,
 	if (length) {
 		ore_calc_stripe_info(layout, offset, length, &ios->si);
 		ios->length = ios->si.length;
-		ios->nr_pages = (ios->length + PAGE_SIZE - 1) / PAGE_SIZE;
+		ios->nr_pages = ((ios->offset & (PAGE_SIZE - 1)) +
+				 ios->length + PAGE_SIZE - 1) / PAGE_SIZE;
 		if (layout->parity)
 			_ore_post_alloc_raid_stuff(ios);
 	}
@@ -536,6 +537,7 @@ void ore_calc_stripe_info(struct ore_layout *layout, u64 file_offset,
 	u64	H = LmodS - G * T;
 
 	u32	N = div_u64(H, U);
+	u32	Nlast;
 
 	/* "H - (N * U)" is just "H % U" so it's bound to u32 */
 	u32	C = (u32)(H - (N * U)) / stripe_unit + G * group_width;
@@ -568,6 +570,10 @@ void ore_calc_stripe_info(struct ore_layout *layout, u64 file_offset,
 	si->length = T - H;
 	if (si->length > length)
 		si->length = length;
+
+	Nlast = div_u64(H + si->length + U - 1, U);
+	si->maxdevUnits = Nlast - N;
+
 	si->M = M;
 }
 EXPORT_SYMBOL(ore_calc_stripe_info);
@@ -583,13 +589,16 @@ int _ore_add_stripe_unit(struct ore_io_state *ios,  unsigned *cur_pg,
 	int ret;
 
 	if (per_dev->bio == NULL) {
-		unsigned pages_in_stripe = ios->layout->group_width *
-					(ios->layout->stripe_unit / PAGE_SIZE);
-		unsigned nr_pages = ios->nr_pages * ios->layout->group_width /
-					(ios->layout->group_width -
-					 ios->layout->parity);
-		unsigned bio_size = (nr_pages + pages_in_stripe) /
-					ios->layout->group_width;
+		unsigned bio_size;
+
+		if (!ios->reading) {
+			bio_size = ios->si.maxdevUnits;
+		} else {
+			bio_size = (ios->si.maxdevUnits + 1) *
+			     (ios->layout->group_width - ios->layout->parity) /
+			     ios->layout->group_width;
+		}
+		bio_size *= (ios->layout->stripe_unit / PAGE_SIZE);
 
 		per_dev->bio = bio_kmalloc(GFP_KERNEL, bio_size);
 		if (unlikely(!per_dev->bio)) {
@@ -609,8 +618,12 @@ int _ore_add_stripe_unit(struct ore_io_state *ios,  unsigned *cur_pg,
 		added_len = bio_add_pc_page(q, per_dev->bio, pages[pg],
 					    pglen, pgbase);
 		if (unlikely(pglen != added_len)) {
-			ORE_DBGMSG("Failed bio_add_pc_page bi_vcnt=%u\n",
-				   per_dev->bio->bi_vcnt);
+			/* If bi_vcnt == bi_max then this is a SW BUG */
+			ORE_DBGMSG("Failed bio_add_pc_page bi_vcnt=0x%x "
+				   "bi_max=0x%x BIO_MAX=0x%x cur_len=0x%x\n",
+				   per_dev->bio->bi_vcnt,
+				   per_dev->bio->bi_max_vecs,
+				   BIO_MAX_PAGES_KMALLOC, cur_len);
 			ret = -ENOMEM;
 			goto out;
 		}
@@ -1098,7 +1111,7 @@ int ore_truncate(struct ore_layout *layout, struct ore_components *oc,
 		size_attr->attr = g_attr_logical_length;
 		size_attr->attr.val_ptr = &size_attr->newsize;
 
-		ORE_DBGMSG("trunc(0x%llx) obj_offset=0x%llx dev=%d\n",
+		ORE_DBGMSG2("trunc(0x%llx) obj_offset=0x%llx dev=%d\n",
 			     _LLU(oc->comps->obj.id), _LLU(obj_size), i);
 		ret = _truncate_mirrors(ios, i * ios->layout->mirrors_p1,
 					&size_attr->attr);