ext4: Move the ext4_i.h header file into ext4.h

There is no longer a reason for a separate ext4_i.h header file, so
move it into ext4.h just to make life easier for developers to find
the relevant data structures and typedefs.  Should also speed up
compiles slightly, too.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

2 files changed, 121 insertions, 141 deletions

diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 02ec44b..ba57d66 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -21,7 +21,10 @@
 #include <linux/magic.h>
 #include <linux/jbd2.h>
 #include <linux/quota.h>
-#include "ext4_i.h"
+#include <linux/rwsem.h>
+#include <linux/rbtree.h>
+#include <linux/seqlock.h>
+#include <linux/mutex.h>
 
 /*
  * The fourth extended filesystem constants/structures
@@ -46,6 +49,19 @@
 #define ext4_debug(f, a...)	do {} while (0)
 #endif
 
+/* data type for block offset of block group */
+typedef int ext4_grpblk_t;
+
+/* data type for filesystem-wide blocks number */
+typedef unsigned long long ext4_fsblk_t;
+
+/* data type for file logical block number */
+typedef __u32 ext4_lblk_t;
+
+/* data type for block group number */
+typedef unsigned int ext4_group_t;
+
+
 /* prefer goal again. length */
 #define EXT4_MB_HINT_MERGE		1
 /* blocks already reserved */
@@ -516,6 +532,110 @@ do {									       \
 #endif /* defined(__KERNEL__) || defined(__linux__) */
 
 /*
+ * storage for cached extent
+ */
+struct ext4_ext_cache {
+	ext4_fsblk_t	ec_start;
+	ext4_lblk_t	ec_block;
+	__u32		ec_len; /* must be 32bit to return holes */
+	__u32		ec_type;
+};
+
+/*
+ * fourth extended file system inode data in memory
+ */
+struct ext4_inode_info {
+	__le32	i_data[15];	/* unconverted */
+	__u32	i_flags;
+	ext4_fsblk_t	i_file_acl;
+	__u32	i_dtime;
+
+	/*
+	 * i_block_group is the number of the block group which contains
+	 * this file's inode.  Constant across the lifetime of the inode,
+	 * it is ued for making block allocation decisions - we try to
+	 * place a file's data blocks near its inode block, and new inodes
+	 * near to their parent directory's inode.
+	 */
+	ext4_group_t	i_block_group;
+	__u32	i_state;		/* Dynamic state flags for ext4 */
+
+	ext4_lblk_t		i_dir_start_lookup;
+#ifdef CONFIG_EXT4_FS_XATTR
+	/*
+	 * Extended attributes can be read independently of the main file
+	 * data. Taking i_mutex even when reading would cause contention
+	 * between readers of EAs and writers of regular file data, so
+	 * instead we synchronize on xattr_sem when reading or changing
+	 * EAs.
+	 */
+	struct rw_semaphore xattr_sem;
+#endif
+#ifdef CONFIG_EXT4_FS_POSIX_ACL
+	struct posix_acl	*i_acl;
+	struct posix_acl	*i_default_acl;
+#endif
+
+	struct list_head i_orphan;	/* unlinked but open inodes */
+
+	/*
+	 * i_disksize keeps track of what the inode size is ON DISK, not
+	 * in memory.  During truncate, i_size is set to the new size by
+	 * the VFS prior to calling ext4_truncate(), but the filesystem won't
+	 * set i_disksize to 0 until the truncate is actually under way.
+	 *
+	 * The intent is that i_disksize always represents the blocks which
+	 * are used by this file.  This allows recovery to restart truncate
+	 * on orphans if we crash during truncate.  We actually write i_disksize
+	 * into the on-disk inode when writing inodes out, instead of i_size.
+	 *
+	 * The only time when i_disksize and i_size may be different is when
+	 * a truncate is in progress.  The only things which change i_disksize
+	 * are ext4_get_block (growth) and ext4_truncate (shrinkth).
+	 */
+	loff_t	i_disksize;
+
+	/*
+	 * i_data_sem is for serialising ext4_truncate() against
+	 * ext4_getblock().  In the 2.4 ext2 design, great chunks of inode's
+	 * data tree are chopped off during truncate. We can't do that in
+	 * ext4 because whenever we perform intermediate commits during
+	 * truncate, the inode and all the metadata blocks *must* be in a
+	 * consistent state which allows truncation of the orphans to restart
+	 * during recovery.  Hence we must fix the get_block-vs-truncate race
+	 * by other means, so we have i_data_sem.
+	 */
+	struct rw_semaphore i_data_sem;
+	struct inode vfs_inode;
+	struct jbd2_inode jinode;
+
+	struct ext4_ext_cache i_cached_extent;
+	/*
+	 * File creation time. Its function is same as that of
+	 * struct timespec i_{a,c,m}time in the generic inode.
+	 */
+	struct timespec i_crtime;
+
+	/* mballoc */
+	struct list_head i_prealloc_list;
+	spinlock_t i_prealloc_lock;
+
+	/* ialloc */
+	ext4_group_t	i_last_alloc_group;
+
+	/* allocation reservation info for delalloc */
+	unsigned int i_reserved_data_blocks;
+	unsigned int i_reserved_meta_blocks;
+	unsigned int i_allocated_meta_blocks;
+	unsigned short i_delalloc_reserved_flag;
+
+	/* on-disk additional length */
+	__u16 i_extra_isize;
+
+	spinlock_t i_block_reservation_lock;
+};
+
+/*
  * File system states
  */
 #define	EXT4_VALID_FS			0x0001	/* Unmounted cleanly */
diff --git a/fs/ext4/ext4_i.h b/fs/ext4/ext4_i.h
deleted file mode 100644
index 4ce2187..0000000
--- a/fs/ext4/ext4_i.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- *  ext4_i.h
- *
- * Copyright (C) 1992, 1993, 1994, 1995
- * Remy Card (card@masi.ibp.fr)
- * Laboratoire MASI - Institut Blaise Pascal
- * Universite Pierre et Marie Curie (Paris VI)
- *
- *  from
- *
- *  linux/include/linux/minix_fs_i.h
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- */
-
-#ifndef _EXT4_I
-#define _EXT4_I
-
-#include <linux/rwsem.h>
-#include <linux/rbtree.h>
-#include <linux/seqlock.h>
-#include <linux/mutex.h>
-
-/* data type for block offset of block group */
-typedef int ext4_grpblk_t;
-
-/* data type for filesystem-wide blocks number */
-typedef unsigned long long ext4_fsblk_t;
-
-/* data type for file logical block number */
-typedef __u32 ext4_lblk_t;
-
-/* data type for block group number */
-typedef unsigned int ext4_group_t;
-
-/*
- * storage for cached extent
- */
-struct ext4_ext_cache {
-	ext4_fsblk_t	ec_start;
-	ext4_lblk_t	ec_block;
-	__u32		ec_len; /* must be 32bit to return holes */
-	__u32		ec_type;
-};
-
-/*
- * fourth extended file system inode data in memory
- */
-struct ext4_inode_info {
-	__le32	i_data[15];	/* unconverted */
-	__u32	i_flags;
-	ext4_fsblk_t	i_file_acl;
-	__u32	i_dtime;
-
-	/*
-	 * i_block_group is the number of the block group which contains
-	 * this file's inode.  Constant across the lifetime of the inode,
-	 * it is ued for making block allocation decisions - we try to
-	 * place a file's data blocks near its inode block, and new inodes
-	 * near to their parent directory's inode.
-	 */
-	ext4_group_t	i_block_group;
-	__u32	i_state;		/* Dynamic state flags for ext4 */
-
-	ext4_lblk_t		i_dir_start_lookup;
-#ifdef CONFIG_EXT4_FS_XATTR
-	/*
-	 * Extended attributes can be read independently of the main file
-	 * data. Taking i_mutex even when reading would cause contention
-	 * between readers of EAs and writers of regular file data, so
-	 * instead we synchronize on xattr_sem when reading or changing
-	 * EAs.
-	 */
-	struct rw_semaphore xattr_sem;
-#endif
-#ifdef CONFIG_EXT4_FS_POSIX_ACL
-	struct posix_acl	*i_acl;
-	struct posix_acl	*i_default_acl;
-#endif
-
-	struct list_head i_orphan;	/* unlinked but open inodes */
-
-	/*
-	 * i_disksize keeps track of what the inode size is ON DISK, not
-	 * in memory.  During truncate, i_size is set to the new size by
-	 * the VFS prior to calling ext4_truncate(), but the filesystem won't
-	 * set i_disksize to 0 until the truncate is actually under way.
-	 *
-	 * The intent is that i_disksize always represents the blocks which
-	 * are used by this file.  This allows recovery to restart truncate
-	 * on orphans if we crash during truncate.  We actually write i_disksize
-	 * into the on-disk inode when writing inodes out, instead of i_size.
-	 *
-	 * The only time when i_disksize and i_size may be different is when
-	 * a truncate is in progress.  The only things which change i_disksize
-	 * are ext4_get_block (growth) and ext4_truncate (shrinkth).
-	 */
-	loff_t	i_disksize;
-
-	/*
-	 * i_data_sem is for serialising ext4_truncate() against
-	 * ext4_getblock().  In the 2.4 ext2 design, great chunks of inode's
-	 * data tree are chopped off during truncate. We can't do that in
-	 * ext4 because whenever we perform intermediate commits during
-	 * truncate, the inode and all the metadata blocks *must* be in a
-	 * consistent state which allows truncation of the orphans to restart
-	 * during recovery.  Hence we must fix the get_block-vs-truncate race
-	 * by other means, so we have i_data_sem.
-	 */
-	struct rw_semaphore i_data_sem;
-	struct inode vfs_inode;
-	struct jbd2_inode jinode;
-
-	struct ext4_ext_cache i_cached_extent;
-	/*
-	 * File creation time. Its function is same as that of
-	 * struct timespec i_{a,c,m}time in the generic inode.
-	 */
-	struct timespec i_crtime;
-
-	/* mballoc */
-	struct list_head i_prealloc_list;
-	spinlock_t i_prealloc_lock;
-
-	/* ialloc */
-	ext4_group_t	i_last_alloc_group;
-
-	/* allocation reservation info for delalloc */
-	unsigned int i_reserved_data_blocks;
-	unsigned int i_reserved_meta_blocks;
-	unsigned int i_allocated_meta_blocks;
-	unsigned short i_delalloc_reserved_flag;
-
-	/* on-disk additional length */
-	__u16 i_extra_isize;
-
-	spinlock_t i_block_reservation_lock;
-};
-
-#endif	/* _EXT4_I */