move fs/partitions to block/

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

1 files changed, 0 insertions, 251 deletions

diff --git a/fs/partitions/Kconfig b/fs/partitions/Kconfig
deleted file mode 100644
index cb5f0a3..0000000
--- a/fs/partitions/Kconfig
+++ /dev/null
@@ -1,251 +0,0 @@
-#
-# Partition configuration
-#
-config PARTITION_ADVANCED
-	bool "Advanced partition selection"
-	help
-	  Say Y here if you would like to use hard disks under Linux which
-	  were partitioned under an operating system running on a different
-	  architecture than your Linux system.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about foreign partitioning schemes.
-
-	  If unsure, say N.
-
-config ACORN_PARTITION
-	bool "Acorn partition support" if PARTITION_ADVANCED
-	default y if ARCH_ACORN
-	help
-	  Support hard disks partitioned under Acorn operating systems.
-
-config ACORN_PARTITION_CUMANA
-	bool "Cumana partition support" if PARTITION_ADVANCED
-	default y if ARCH_ACORN
-	depends on ACORN_PARTITION
-	help
-	  Say Y here if you would like to use hard disks under Linux which
-	  were partitioned using the Cumana interface on Acorn machines.
-
-config ACORN_PARTITION_EESOX
-	bool "EESOX partition support" if PARTITION_ADVANCED
-	default y if ARCH_ACORN
-	depends on ACORN_PARTITION
-
-config ACORN_PARTITION_ICS
-	bool "ICS partition support" if PARTITION_ADVANCED
-	default y if ARCH_ACORN
-	depends on ACORN_PARTITION
-	help
-	  Say Y here if you would like to use hard disks under Linux which
-	  were partitioned using the ICS interface on Acorn machines.
-
-config ACORN_PARTITION_ADFS
-	bool "Native filecore partition support" if PARTITION_ADVANCED
-	default y if ARCH_ACORN
-	depends on ACORN_PARTITION
-	help
-	  The Acorn Disc Filing System is the standard file system of the
-	  RiscOS operating system which runs on Acorn's ARM-based Risc PC
-	  systems and the Acorn Archimedes range of machines.  If you say
-	  `Y' here, Linux will support disk partitions created under ADFS.
-
-config ACORN_PARTITION_POWERTEC
-	bool "PowerTec partition support" if PARTITION_ADVANCED
-	default y if ARCH_ACORN
-	depends on ACORN_PARTITION
-	help
-	  Support reading partition tables created on Acorn machines using
-	  the PowerTec SCSI drive.
-
-config ACORN_PARTITION_RISCIX
-	bool "RISCiX partition support" if PARTITION_ADVANCED
-	default y if ARCH_ACORN
-	depends on ACORN_PARTITION
-	help
-	  Once upon a time, there was a native Unix port for the Acorn series
-	  of machines called RISCiX.  If you say 'Y' here, Linux will be able
-	  to read disks partitioned under RISCiX.
-
-config OSF_PARTITION
-	bool "Alpha OSF partition support" if PARTITION_ADVANCED
-	default y if ALPHA
-	help
-	  Say Y here if you would like to use hard disks under Linux which
-	  were partitioned on an Alpha machine.
-
-config AMIGA_PARTITION
-	bool "Amiga partition table support" if PARTITION_ADVANCED
-	default y if (AMIGA || AFFS_FS=y)
-	help
-	  Say Y here if you would like to use hard disks under Linux which
-	  were partitioned under AmigaOS.
-
-config ATARI_PARTITION
-	bool "Atari partition table support" if PARTITION_ADVANCED
-	default y if ATARI
-	help
-	  Say Y here if you would like to use hard disks under Linux which
-	  were partitioned under the Atari OS.
-
-config IBM_PARTITION
-	bool "IBM disk label and partition support"
-	depends on PARTITION_ADVANCED && S390
-	help
-	  Say Y here if you would like to be able to read the hard disk
-	  partition table format used by IBM DASD disks operating under CMS.
-	  Otherwise, say N.
-
-config MAC_PARTITION
-	bool "Macintosh partition map support" if PARTITION_ADVANCED
-	default y if (MAC || PPC_PMAC)
-	help
-	  Say Y here if you would like to use hard disks under Linux which
-	  were partitioned on a Macintosh.
-
-config MSDOS_PARTITION
-	bool "PC BIOS (MSDOS partition tables) support" if PARTITION_ADVANCED
-	default y
-	help
-	  Say Y here.
-
-config BSD_DISKLABEL
-	bool "BSD disklabel (FreeBSD partition tables) support"
-	depends on PARTITION_ADVANCED && MSDOS_PARTITION
-	help
-	  FreeBSD uses its own hard disk partition scheme on your PC. It
-	  requires only one entry in the primary partition table of your disk
-	  and manages it similarly to DOS extended partitions, putting in its
-	  first sector a new partition table in BSD disklabel format. Saying Y
-	  here allows you to read these disklabels and further mount FreeBSD
-	  partitions from within Linux if you have also said Y to "UFS
-	  file system support", above. If you don't know what all this is
-	  about, say N.
-
-config MINIX_SUBPARTITION
-	bool "Minix subpartition support"
-	depends on PARTITION_ADVANCED && MSDOS_PARTITION
-	help
-	  Minix 2.0.0/2.0.2 subpartition table support for Linux.
-	  Say Y here if you want to mount and use Minix 2.0.0/2.0.2
-	  subpartitions.
-
-config SOLARIS_X86_PARTITION
-	bool "Solaris (x86) partition table support"
-	depends on PARTITION_ADVANCED && MSDOS_PARTITION
-	help
-	  Like most systems, Solaris x86 uses its own hard disk partition
-	  table format, incompatible with all others. Saying Y here allows you
-	  to read these partition tables and further mount Solaris x86
-	  partitions from within Linux if you have also said Y to "UFS
-	  file system support", above.
-
-config UNIXWARE_DISKLABEL
-	bool "Unixware slices support"
-	depends on PARTITION_ADVANCED && MSDOS_PARTITION
-	---help---
-	  Like some systems, UnixWare uses its own slice table inside a
-	  partition (VTOC - Virtual Table of Contents). Its format is
-	  incompatible with all other OSes. Saying Y here allows you to read
-	  VTOC and further mount UnixWare partitions read-only from within
-	  Linux if you have also said Y to "UFS file system support" or
-	  "System V and Coherent file system support", above.
-
-	  This is mainly used to carry data from a UnixWare box to your
-	  Linux box via a removable medium like magneto-optical, ZIP or
-	  removable IDE drives. Note, however, that a good portable way to
-	  transport files and directories between unixes (and even other
-	  operating systems) is given by the tar program ("man tar" or
-	  preferably "info tar").
-
-	  If you don't know what all this is about, say N.
-
-config LDM_PARTITION
-	bool "Windows Logical Disk Manager (Dynamic Disk) support"
-	depends on PARTITION_ADVANCED
-	---help---
-	  Say Y here if you would like to use hard disks under Linux which
-	  were partitioned using Windows 2000's/XP's or Vista's Logical Disk
-	  Manager.  They are also known as "Dynamic Disks".
-
-	  Note this driver only supports Dynamic Disks with a protective MBR
-	  label, i.e. DOS partition table.  It does not support GPT labelled
-	  Dynamic Disks yet as can be created with Vista.
-
-	  Windows 2000 introduced the concept of Dynamic Disks to get around
-	  the limitations of the PC's partitioning scheme.  The Logical Disk
-	  Manager allows the user to repartition a disk and create spanned,
-	  mirrored, striped or RAID volumes, all without the need for
-	  rebooting.
-
-	  Normal partitions are now called Basic Disks under Windows 2000, XP,
-	  and Vista.
-
-	  For a fuller description read <file:Documentation/ldm.txt>.
-
-	  If unsure, say N.
-
-config LDM_DEBUG
-	bool "Windows LDM extra logging"
-	depends on LDM_PARTITION
-	help
-	  Say Y here if you would like LDM to log verbosely.  This could be
-	  helpful if the driver doesn't work as expected and you'd like to
-	  report a bug.
-
-	  If unsure, say N.
-
-config SGI_PARTITION
-	bool "SGI partition support" if PARTITION_ADVANCED
-	default y if DEFAULT_SGI_PARTITION
-	help
-	  Say Y here if you would like to be able to read the hard disk
-	  partition table format used by SGI machines.
-
-config ULTRIX_PARTITION
-	bool "Ultrix partition table support" if PARTITION_ADVANCED
-	default y if MACH_DECSTATION
-	help
-	  Say Y here if you would like to be able to read the hard disk
-	  partition table format used by DEC (now Compaq) Ultrix machines.
-	  Otherwise, say N.
-
-config SUN_PARTITION
-	bool "Sun partition tables support" if PARTITION_ADVANCED
-	default y if (SPARC || SUN3 || SUN3X)
-	---help---
-	  Like most systems, SunOS uses its own hard disk partition table
-	  format, incompatible with all others. Saying Y here allows you to
-	  read these partition tables and further mount SunOS partitions from
-	  within Linux if you have also said Y to "UFS file system support",
-	  above. This is mainly used to carry data from a SPARC under SunOS to
-	  your Linux box via a removable medium like magneto-optical or ZIP
-	  drives; note however that a good portable way to transport files and
-	  directories between unixes (and even other operating systems) is
-	  given by the tar program ("man tar" or preferably "info tar"). If
-	  you don't know what all this is about, say N.
-
-config KARMA_PARTITION
-	bool "Karma Partition support"
-	depends on PARTITION_ADVANCED
-	help
-	  Say Y here if you would like to mount the Rio Karma MP3 player, as it
-	  uses a proprietary partition table.
-
-config EFI_PARTITION
-	bool "EFI GUID Partition support"
-	depends on PARTITION_ADVANCED
-	select CRC32
-	help
-	  Say Y here if you would like to use hard disks under Linux which
-	  were partitioned using EFI GPT.
-
-config SYSV68_PARTITION
-	bool "SYSV68 partition table support" if PARTITION_ADVANCED
-	default y if VME
-	help
-	  Say Y here if you would like to be able to read the hard disk
-	  partition table format used by Motorola Delta machines (using
-	  sysv68).
-	  Otherwise, say N.