Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 228 insertions, 0 deletions

diff --git a/fs/partitions/Kconfig b/fs/partitions/Kconfig
new file mode 100644
index 0000000..deb25b6
--- /dev/null
+++ b/fs/partitions/Kconfig
@@ -0,0 +1,228 @@
+#
+# Partition configuration
+#
+config PARTITION_ADVANCED
+	bool "Advanced partition selection"
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned under an operating system running on a different
+	  architecture than your Linux system.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about foreign partitioning schemes.
+
+	  If unsure, say N.
+
+config ACORN_PARTITION
+	bool "Acorn partition support" if PARTITION_ADVANCED
+	default y if ARCH_ACORN
+	help
+	  Support hard disks partitioned under Acorn operating systems.
+
+config ACORN_PARTITION_CUMANA
+	bool "Cumana partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+	default y if ARCH_ACORN
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned using the Cumana interface on Acorn machines.
+
+config ACORN_PARTITION_EESOX
+	bool "EESOX partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+	default y if ARCH_ACORN
+
+config ACORN_PARTITION_ICS
+	bool "ICS partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+	default y if ARCH_ACORN
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned using the ICS interface on Acorn machines.
+
+config ACORN_PARTITION_ADFS
+	bool "Native filecore partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+	default y if ARCH_ACORN
+	help
+	  The Acorn Disc Filing System is the standard file system of the
+	  RiscOS operating system which runs on Acorn's ARM-based Risc PC
+	  systems and the Acorn Archimedes range of machines.  If you say
+	  `Y' here, Linux will support disk partitions created under ADFS.
+
+config ACORN_PARTITION_POWERTEC
+	bool "PowerTec partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+	default y if ARCH_ACORN
+	help
+	  Support reading partition tables created on Acorn machines using
+	  the PowerTec SCSI drive.
+
+config ACORN_PARTITION_RISCIX
+	bool "RISCiX partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+	default y if ARCH_ACORN
+	help
+	  Once upon a time, there was a native Unix port for the Acorn series
+	  of machines called RISCiX.  If you say 'Y' here, Linux will be able
+	  to read disks partitioned under RISCiX.
+
+config OSF_PARTITION
+	bool "Alpha OSF partition support" if PARTITION_ADVANCED
+	default y if ALPHA
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned on an Alpha machine.
+
+config AMIGA_PARTITION
+	bool "Amiga partition table support" if PARTITION_ADVANCED
+	default y if (AMIGA || AFFS_FS=y)
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned under AmigaOS.
+
+config ATARI_PARTITION
+	bool "Atari partition table support" if PARTITION_ADVANCED
+	default y if ATARI
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned under the Atari OS.
+
+config IBM_PARTITION
+	bool "IBM disk label and partition support"
+	depends on PARTITION_ADVANCED && ARCH_S390
+	help
+	  Say Y here if you would like to be able to read the hard disk
+	  partition table format used by IBM DASD disks operating under CMS.
+	  Otherwise, say N.
+
+config MAC_PARTITION
+	bool "Macintosh partition map support" if PARTITION_ADVANCED
+	default y if MAC
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned on a Macintosh.
+
+config MSDOS_PARTITION
+	bool "PC BIOS (MSDOS partition tables) support" if PARTITION_ADVANCED
+	default y
+	help
+	  Say Y here.
+
+config BSD_DISKLABEL
+	bool "BSD disklabel (FreeBSD partition tables) support"
+	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	help
+	  FreeBSD uses its own hard disk partition scheme on your PC. It
+	  requires only one entry in the primary partition table of your disk
+	  and manages it similarly to DOS extended partitions, putting in its
+	  first sector a new partition table in BSD disklabel format. Saying Y
+	  here allows you to read these disklabels and further mount FreeBSD
+	  partitions from within Linux if you have also said Y to "UFS
+	  file system support", above. If you don't know what all this is
+	  about, say N.
+
+config MINIX_SUBPARTITION
+	bool "Minix subpartition support"
+	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	help
+	  Minix 2.0.0/2.0.2 subpartition table support for Linux.
+	  Say Y here if you want to mount and use Minix 2.0.0/2.0.2
+	  subpartitions.
+
+config SOLARIS_X86_PARTITION
+	bool "Solaris (x86) partition table support"
+	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	help
+	  Like most systems, Solaris x86 uses its own hard disk partition
+	  table format, incompatible with all others. Saying Y here allows you
+	  to read these partition tables and further mount Solaris x86
+	  partitions from within Linux if you have also said Y to "UFS
+	  file system support", above.
+
+config UNIXWARE_DISKLABEL
+	bool "Unixware slices support"
+	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	---help---
+	  Like some systems, UnixWare uses its own slice table inside a
+	  partition (VTOC - Virtual Table of Contents). Its format is
+	  incompatible with all other OSes. Saying Y here allows you to read
+	  VTOC and further mount UnixWare partitions read-only from within
+	  Linux if you have also said Y to "UFS file system support" or
+	  "System V and Coherent file system support", above.
+
+	  This is mainly used to carry data from a UnixWare box to your
+	  Linux box via a removable medium like magneto-optical, ZIP or
+	  removable IDE drives. Note, however, that a good portable way to
+	  transport files and directories between unixes (and even other
+	  operating systems) is given by the tar program ("man tar" or
+	  preferably "info tar").
+
+	  If you don't know what all this is about, say N.
+
+config LDM_PARTITION
+	bool "Windows Logical Disk Manager (Dynamic Disk) support"
+	depends on PARTITION_ADVANCED
+	---help---
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned using Windows 2000's or XP's Logical Disk Manager.
+	  They are also known as "Dynamic Disks".
+
+	  Windows 2000 introduced the concept of Dynamic Disks to get around
+	  the limitations of the PC's partitioning scheme.  The Logical Disk
+	  Manager allows the user to repartition a disk and create spanned,
+	  mirrored, striped or RAID volumes, all without the need for
+	  rebooting.
+
+	  Normal partitions are now called Basic Disks under Windows 2000 and
+	  XP.
+
+	  For a fuller description read <file:Documentation/ldm.txt>.
+
+	  If unsure, say N.
+
+config LDM_DEBUG
+	bool "Windows LDM extra logging"
+	depends on LDM_PARTITION
+	help
+	  Say Y here if you would like LDM to log verbosely.  This could be
+	  helpful if the driver doesn't work as expected and you'd like to
+	  report a bug.
+
+	  If unsure, say N.
+
+config SGI_PARTITION
+	bool "SGI partition support" if PARTITION_ADVANCED
+	default y if (SGI_IP22 || SGI_IP27 || ((MACH_JAZZ || SNI_RM200_PCI) && !CPU_LITTLE_ENDIAN))
+	help
+	  Say Y here if you would like to be able to read the hard disk
+	  partition table format used by SGI machines.
+
+config ULTRIX_PARTITION
+	bool "Ultrix partition table support" if PARTITION_ADVANCED
+	default y if MACH_DECSTATION
+	help
+	  Say Y here if you would like to be able to read the hard disk
+	  partition table format used by DEC (now Compaq) Ultrix machines.
+	  Otherwise, say N.
+
+config SUN_PARTITION
+	bool "Sun partition tables support" if PARTITION_ADVANCED
+	default y if (SPARC32 || SPARC64 || SUN3 || SUN3X)
+	---help---
+	  Like most systems, SunOS uses its own hard disk partition table
+	  format, incompatible with all others. Saying Y here allows you to
+	  read these partition tables and further mount SunOS partitions from
+	  within Linux if you have also said Y to "UFS file system support",
+	  above. This is mainly used to carry data from a SPARC under SunOS to
+	  your Linux box via a removable medium like magneto-optical or ZIP
+	  drives; note however that a good portable way to transport files and
+	  directories between unixes (and even other operating systems) is
+	  given by the tar program ("man tar" or preferably "info tar"). If
+	  you don't know what all this is about, say N.
+
+config EFI_PARTITION
+	bool "EFI GUID Partition support"
+	depends on PARTITION_ADVANCED
+	select CRC32
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned using EFI GPT.  Presently only useful on the
+	  IA-64 platform.
+
+#      define_bool CONFIG_ACORN_PARTITION_CUMANA y