ore: RAID5 read

This patch introduces the first stage of RAID5 support
mainly the skip-over-raid-units when reading. For
writes it inserts BLANK units, into where XOR blocks
should be calculated and written to.

It introduces the new "general raid maths", and the main
additional parameters and components needed for raid5.

Since at this stage it could corrupt future version that
actually do support raid5. The enablement of raid5
mounting and setting of parity-count > 0 is disabled. So
the raid5 code will never be used. Mounting of raid5 is
only enabled later once the basic XOR write is also in.
But if the patch "enable RAID5" is applied this code has
been tested to be able to properly read raid5 volumes
and is according to standard.

Also it has been tested that the new maths still properly
supports RAID0 and grouping code just as before.
(BTW: I have found more bugs in the pnfs-obj RAID math
 fixed here)

The ore.c file is getting too big, so new ore_raid.[hc]
files are added that will include the special raid stuff
that are not used in striping and mirrors. In future write
support these will get bigger.
When adding the ore_raid.c to Kbuild file I was forced to
rename ore.ko to libore.ko. Is it possible to keep source
file, say ore.c and module file ore.ko the same even if there
are multiple files inside ore.ko?

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

1 files changed, 140 insertions, 0 deletions

diff --git a/fs/exofs/ore_raid.c b/fs/exofs/ore_raid.c
new file mode 100644
index 0000000..8d4b93a
--- /dev/null
+++ b/fs/exofs/ore_raid.c
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2011
+ * Boaz Harrosh <bharrosh@panasas.com>
+ *
+ * This file is part of the objects raid engine (ore).
+ *
+ * It is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with "ore". If not, write to the Free Software Foundation, Inc:
+ *	"Free Software Foundation <info@fsf.org>"
+ */
+
+#include <linux/gfp.h>
+
+#include "ore_raid.h"
+
+struct page *_raid_page_alloc(void)
+{
+	return alloc_page(GFP_KERNEL);
+}
+
+void _raid_page_free(struct page *p)
+{
+	__free_page(p);
+}
+
+void _ore_add_sg_seg(struct ore_per_dev_state *per_dev, unsigned cur_len,
+		     bool not_last)
+{
+	struct osd_sg_entry *sge;
+
+	ORE_DBGMSG("dev=%d cur_len=0x%x not_last=%d cur_sg=%d "
+		     "offset=0x%llx length=0x%x last_sgs_total=0x%x\n",
+		     per_dev->dev, cur_len, not_last, per_dev->cur_sg,
+		     _LLU(per_dev->offset), per_dev->length,
+		     per_dev->last_sgs_total);
+
+	if (!per_dev->cur_sg) {
+		sge = per_dev->sglist;
+
+		/* First time we prepare two entries */
+		if (per_dev->length) {
+			++per_dev->cur_sg;
+			sge->offset = per_dev->offset;
+			sge->len = per_dev->length;
+		} else {
+			/* Here the parity is the first unit of this object.
+			 * This happens every time we reach a parity device on
+			 * the same stripe as the per_dev->offset. We need to
+			 * just skip this unit.
+			 */
+			per_dev->offset += cur_len;
+			return;
+		}
+	} else {
+		/* finalize the last one */
+		sge = &per_dev->sglist[per_dev->cur_sg - 1];
+		sge->len = per_dev->length - per_dev->last_sgs_total;
+	}
+
+	if (not_last) {
+		/* Partly prepare the next one */
+		struct osd_sg_entry *next_sge = sge + 1;
+
+		++per_dev->cur_sg;
+		next_sge->offset = sge->offset + sge->len + cur_len;
+		/* Save cur len so we know how mutch was added next time */
+		per_dev->last_sgs_total = per_dev->length;
+		next_sge->len = 0;
+	} else if (!sge->len) {
+		/* Optimize for when the last unit is a parity */
+		--per_dev->cur_sg;
+	}
+}
+
+/* In writes @cur_len means length left. .i.e cur_len==0 is the last parity U */
+int _ore_add_parity_unit(struct ore_io_state *ios,
+			    struct ore_striping_info *si,
+			    struct ore_per_dev_state *per_dev,
+			    unsigned cur_len)
+{
+	if (ios->reading) {
+		BUG_ON(per_dev->cur_sg >= ios->sgs_per_dev);
+		_ore_add_sg_seg(per_dev, cur_len, true);
+	} else {
+		struct page **pages = ios->parity_pages + ios->cur_par_page;
+		unsigned num_pages = ios->layout->stripe_unit / PAGE_SIZE;
+		unsigned array_start = 0;
+		unsigned i;
+		int ret;
+
+		for (i = 0; i < num_pages; i++) {
+			pages[i] = _raid_page_alloc();
+			if (unlikely(!pages[i]))
+				return -ENOMEM;
+
+			++(ios->cur_par_page);
+			/* TODO: only read support for now */
+			clear_highpage(pages[i]);
+		}
+
+		ORE_DBGMSG("writing dev=%d num_pages=%d cur_par_page=%d",
+			     per_dev->dev, num_pages, ios->cur_par_page);
+
+		ret = _ore_add_stripe_unit(ios,  &array_start, 0, pages,
+					   per_dev, num_pages * PAGE_SIZE);
+		if (unlikely(ret))
+			return ret;
+	}
+	return 0;
+}
+
+int _ore_post_alloc_raid_stuff(struct ore_io_state *ios)
+{
+	/*TODO: Only raid writes has stuff to add here */
+	return 0;
+}
+
+void _ore_free_raid_stuff(struct ore_io_state *ios)
+{
+	if (ios->parity_pages) { /* writing and raid */
+		unsigned i;
+
+		for (i = 0; i < ios->cur_par_page; i++) {
+			struct page *page = ios->parity_pages[i];
+
+			if (page)
+				_raid_page_free(page);
+		}
+		if (ios->extra_part_alloc)
+			kfree(ios->parity_pages);
+	} else {
+		/* Will only be set if raid reading && sglist is big */
+		if (ios->extra_part_alloc)
+			kfree(ios->per_dev[0].sglist);
+	}
+}