summaryrefslogtreecommitdiffstats
path: root/fs/direct-io.c
diff options
context:
space:
mode:
authornpiggin@suse.de <npiggin@suse.de>2010-05-27 01:05:33 +1000
committerAl Viro <viro@zeniv.linux.org.uk>2010-05-27 22:15:33 -0400
commit7bb46a6734a7e1ad4beaecc11cae7ed3ff81d30f (patch)
treee575d9c55e2a6ccc645dcb3ae2564de458b428f2 /fs/direct-io.c
parent7000d3c424e5bb350e502a477fb0e1ed42f8b10e (diff)
downloadop-kernel-dev-7bb46a6734a7e1ad4beaecc11cae7ed3ff81d30f.zip
op-kernel-dev-7bb46a6734a7e1ad4beaecc11cae7ed3ff81d30f.tar.gz
fs: introduce new truncate sequence
Introduce a new truncate calling sequence into fs/mm subsystems. Rather than setattr > vmtruncate > truncate, have filesystems call their truncate sequence from ->setattr if filesystem specific operations are required. vmtruncate is deprecated, and truncate_pagecache and inode_newsize_ok helpers introduced previously should be used. simple_setattr is introduced for simple in-ram filesystems to implement the new truncate sequence. Eventually all filesystems should be converted to implement a setattr, and the default code in notify_change should go away. simple_setsize is also introduced to perform just the ATTR_SIZE portion of simple_setattr (ie. changing i_size and trimming pagecache). To implement the new truncate sequence: - filesystem specific manipulations (eg freeing blocks) must be done in the setattr method rather than ->truncate. - vmtruncate can not be used by core code to trim blocks past i_size in the event of write failure after allocation, so this must be performed in the fs code. - convert usage of helpers block_write_begin, nobh_write_begin, cont_write_begin, and *blockdev_direct_IO* to use _newtrunc postfixed variants. These avoid calling vmtruncate to trim blocks (see previous). - inode_setattr should not be used. generic_setattr is a new function to be used to copy simple attributes into the generic inode. - make use of the better opportunity to handle errors with the new sequence. Big problem with the previous calling sequence: the filesystem is not called until i_size has already changed. This means it is not allowed to fail the call, and also it does not know what the previous i_size was. Also, generic code calling vmtruncate to truncate allocated blocks in case of error had no good way to return a meaningful error (or, for example, atomically handle block deallocation). Cc: Christoph Hellwig <hch@lst.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Diffstat (limited to 'fs/direct-io.c')
-rw-r--r--fs/direct-io.c61
1 files changed, 40 insertions, 21 deletions
diff --git a/fs/direct-io.c b/fs/direct-io.c
index da111aa..7600aac 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -1134,27 +1134,8 @@ direct_io_worker(int rw, struct kiocb *iocb, struct inode *inode,
return ret;
}
-/*
- * This is a library function for use by filesystem drivers.
- *
- * The locking rules are governed by the flags parameter:
- * - if the flags value contains DIO_LOCKING we use a fancy locking
- * scheme for dumb filesystems.
- * For writes this function is called under i_mutex and returns with
- * i_mutex held, for reads, i_mutex is not held on entry, but it is
- * taken and dropped again before returning.
- * For reads and writes i_alloc_sem is taken in shared mode and released
- * on I/O completion (which may happen asynchronously after returning to
- * the caller).
- *
- * - if the flags value does NOT contain DIO_LOCKING we don't use any
- * internal locking but rather rely on the filesystem to synchronize
- * direct I/O reads/writes versus each other and truncate.
- * For reads and writes both i_mutex and i_alloc_sem are not held on
- * entry and are never taken.
- */
ssize_t
-__blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
+__blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb, struct inode *inode,
struct block_device *bdev, const struct iovec *iov, loff_t offset,
unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
dio_submit_t submit_io, int flags)
@@ -1247,9 +1228,46 @@ __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
nr_segs, blkbits, get_block, end_io,
submit_io, dio);
+out:
+ return retval;
+}
+EXPORT_SYMBOL(__blockdev_direct_IO_newtrunc);
+
+/*
+ * This is a library function for use by filesystem drivers.
+ *
+ * The locking rules are governed by the flags parameter:
+ * - if the flags value contains DIO_LOCKING we use a fancy locking
+ * scheme for dumb filesystems.
+ * For writes this function is called under i_mutex and returns with
+ * i_mutex held, for reads, i_mutex is not held on entry, but it is
+ * taken and dropped again before returning.
+ * For reads and writes i_alloc_sem is taken in shared mode and released
+ * on I/O completion (which may happen asynchronously after returning to
+ * the caller).
+ *
+ * - if the flags value does NOT contain DIO_LOCKING we don't use any
+ * internal locking but rather rely on the filesystem to synchronize
+ * direct I/O reads/writes versus each other and truncate.
+ * For reads and writes both i_mutex and i_alloc_sem are not held on
+ * entry and are never taken.
+ */
+ssize_t
+__blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
+ struct block_device *bdev, const struct iovec *iov, loff_t offset,
+ unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
+ dio_submit_t submit_io, int flags)
+{
+ ssize_t retval;
+
+ retval = __blockdev_direct_IO_newtrunc(rw, iocb, inode, bdev, iov,
+ offset, nr_segs, get_block, end_io, submit_io, flags);
/*
* In case of error extending write may have instantiated a few
* blocks outside i_size. Trim these off again for DIO_LOCKING.
+ * NOTE: DIO_NO_LOCK/DIO_OWN_LOCK callers have to handle this in
+ * their own manner. This is a further example of where the old
+ * truncate sequence is inadequate.
*
* NOTE: filesystems with their own locking have to handle this
* on their own.
@@ -1257,12 +1275,13 @@ __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
if (flags & DIO_LOCKING) {
if (unlikely((rw & WRITE) && retval < 0)) {
loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
if (end > isize)
vmtruncate(inode, isize);
}
}
-out:
return retval;
}
EXPORT_SYMBOL(__blockdev_direct_IO);
OpenPOWER on IntegriCloud