[CIFS] Add in some missing flags and cifs README and TODO corrections

Signed-off-by: Steve French <sfrench@us.ibm.com>

1 files changed, 18 insertions, 7 deletions

diff --git a/fs/cifs/README b/fs/cifs/README
index 4d01697..eb3efd5 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -301,10 +301,21 @@ A partial list of the supported mount options follows:
 		during the local client kernel build will be used.
 		If server does not support Unicode, this parameter is
 		unused.
-  rsize		default read size (usually 16K)
-  wsize		default write size (usually 16K, 32K is often better over GigE)
-		maximum wsize currently allowed by CIFS is 57344 (14 4096 byte
-		pages)
+  rsize		default read size (usually 16K). The client currently
+		can not use rsize larger than CIFSMaxBufSize. CIFSMaxBufSize
+		defaults to 16K and may be changed (from 8K to the maximum
+		kmalloc size allowed by your kernel) at module install time
+		for cifs.ko. Setting CIFSMaxBufSize to a very large value
+		will cause cifs to use more memory and may reduce performance
+		in some cases.  To use rsize greater than 127K (the original
+		cifs protocol maximum) also requires that the server support
+		a new Unix Capability flag (for very large read) which some
+		newer servers (e.g. Samba 3.0.26 or later) do. rsize can be
+		set from a minimum of 2048 to a maximum of 130048 (127K or
+		CIFSMaxBufSize, whichever is smaller)
+  wsize		default write size (default 57344)
+		maximum wsize currently allowed by CIFS is 57344 (fourteen
+		4096 byte pages)
   rw		mount the network share read-write (note that the
 		server may still consider the share read-only)
   ro		mount network share read-only
@@ -582,10 +593,10 @@ the start of smb requests and responses can be enabled via:
 
 	echo 1 > /proc/fs/cifs/traceSMB
 
-Two other experimental features are under development and to test 
-require enabling CONFIG_CIFS_EXPERIMENTAL
+Two other experimental features are under development. To test these
+requires enabling CONFIG_CIFS_EXPERIMENTAL
 
-	More efficient write operations
+	ipv6 enablement
 
 	DNOTIFY fcntl: needed for support of directory change 
 			    notification and perhaps later for file leases)