Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits)
  [media] ir-mce_kbd-decoder: include module.h for its facilities
  [media] ov5642: include module.h for its facilities
  [media] em28xx: Fix DVB-C maxsize for em2884
  [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz
  [media] v4l: mt9v032: Fix Bayer pattern
  [media] V4L: mt9m111: rewrite set_pixfmt
  [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear
  [media] V4L: initial driver for ov5642 CMOS sensor
  [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails
  [media] V4L: soc-camera: remove soc-camera bus and devices on it
  [media] V4L: soc-camera: un-export the soc-camera bus
  [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier
  [media] V4L: add media bus configuration subdev operations
  [media] V4L: soc-camera: group struct field initialisations together
  [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks
  [media] V4L: pxa-camera: switch to using standard PM hooks
  [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param
  [media] Don't OOPS if videobuf_dvb_get_frontend return NULL
  [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision
  [media] omap3isp: Support configurable HS/VS polarities
  ...

Fix up conflicts:
 - arch/arm/mach-omap2/board-rx51-peripherals.c:
     cleanup regulator supply definitions in mach-omap2
   vs
     OMAP3: RX-51: define vdds_csib regulator supply
 - drivers/staging/tm6000/tm6000-alsa.c (trivial)

335 files changed, 44829 insertions, 8629 deletions

diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 6995940..9575db4 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -68,7 +68,6 @@ config VIDEO_V4L2_SUBDEV_API
 
 config DVB_CORE
 	tristate "DVB for Linux"
-	depends on NET && INET
 	select CRC32
 	help
 	  DVB core utility functions for device handling, software fallbacks etc.
@@ -85,6 +84,19 @@ config DVB_CORE
 
 	  If unsure say N.
 
+config DVB_NET
+	bool "DVB Network Support"
+	default (NET && INET)
+	depends on NET && INET && DVB_CORE
+	help
+	  This option enables DVB Network Support which is a part of the DVB
+	  standard. It is used, for example, by automatic firmware updates used
+	  on Set-Top-Boxes. It can also be used to access the Internet via the
+	  DVB card, if the network provider supports it.
+
+	  You may want to disable the network support on embedded devices. If
+	  unsure say Y.
+
 config VIDEO_MEDIA
 	tristate
 	default (DVB_CORE && (VIDEO_DEV = n)) || (VIDEO_DEV && (DVB_CORE = n)) || (DVB_CORE && VIDEO_DEV)
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index 22d3ca3..996302a 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -23,6 +23,7 @@ config MEDIA_TUNER
 	depends on VIDEO_MEDIA && I2C
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMISE
@@ -152,6 +153,15 @@ config MEDIA_TUNER_XC5000
 	  This device is only used inside a SiP called together with a
 	  demodulator for now.
 
+config MEDIA_TUNER_XC4000
+	tristate "Xceive XC4000 silicon tuner"
+	depends on VIDEO_MEDIA && I2C
+	default m if MEDIA_TUNER_CUSTOMISE
+	help
+	  A driver for the silicon tuner XC4000 from Xceive.
+	  This device is only used inside a SiP called together with a
+	  demodulator for now.
+
 config MEDIA_TUNER_MXL5005S
 	tristate "MaxLinear MSL5005S silicon tuner"
 	depends on VIDEO_MEDIA && I2C
diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile
index 2cb4f53..20d24fc 100644
--- a/drivers/media/common/tuners/Makefile
+++ b/drivers/media/common/tuners/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MEDIA_TUNER_TDA9887) += tda9887.o
 obj-$(CONFIG_MEDIA_TUNER_TDA827X) += tda827x.o
 obj-$(CONFIG_MEDIA_TUNER_TDA18271) += tda18271.o
 obj-$(CONFIG_MEDIA_TUNER_XC5000) += xc5000.o
+obj-$(CONFIG_MEDIA_TUNER_XC4000) += xc4000.o
 obj-$(CONFIG_MEDIA_TUNER_MT2060) += mt2060.o
 obj-$(CONFIG_MEDIA_TUNER_MT2266) += mt2266.o
 obj-$(CONFIG_MEDIA_TUNER_QT1010) += qt1010.o
diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c
index afba6dc..94a603a 100644
--- a/drivers/media/common/tuners/tuner-types.c
+++ b/drivers/media/common/tuners/tuner-types.c
@@ -1805,6 +1805,10 @@ struct tunertype tuners[] = {
 		.name   = "Xceive 5000 tuner",
 		/* see xc5000.c for details */
 	},
+	[TUNER_XC4000] = { /* Xceive 4000 */
+		.name   = "Xceive 4000 tuner",
+		/* see xc4000.c for details */
+	},
 	[TUNER_TCL_MF02GIP_5N] = { /* TCL tuner MF02GIP-5N-E */
 		.name   = "TCL tuner MF02GIP-5N-E",
 		.params = tuner_tcl_mf02gip_5n_params,
diff --git a/drivers/media/common/tuners/xc4000.c b/drivers/media/common/tuners/xc4000.c
new file mode 100644
index 0000000..634f4d9
--- /dev/null
+++ b/drivers/media/common/tuners/xc4000.c
@@ -0,0 +1,1691 @@
+/*
+ *  Driver for Xceive XC4000 "QAM/8VSB single chip tuner"
+ *
+ *  Copyright (c) 2007 Xceive Corporation
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
+ *  Copyright (c) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *  Copyright (c) 2009 Davide Ferri <d.ferri@zero11.it>
+ *  Copyright (c) 2010 Istvan Varga <istvan_v@mailbox.hu>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/videodev2.h>
+#include <linux/delay.h>
+#include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <asm/unaligned.h>
+
+#include "dvb_frontend.h"
+
+#include "xc4000.h"
+#include "tuner-i2c.h"
+#include "tuner-xc2028-types.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debugging level (0 to 2, default: 0 (off)).");
+
+static int no_poweroff;
+module_param(no_poweroff, int, 0644);
+MODULE_PARM_DESC(no_poweroff, "Power management (1: disabled, 2: enabled, "
+	"0 (default): use device-specific default mode).");
+
+static int audio_std;
+module_param(audio_std, int, 0644);
+MODULE_PARM_DESC(audio_std, "Audio standard. XC4000 audio decoder explicitly "
+	"needs to know what audio standard is needed for some video standards "
+	"with audio A2 or NICAM. The valid settings are a sum of:\n"
+	" 1: use NICAM/B or A2/B instead of NICAM/A or A2/A\n"
+	" 2: use A2 instead of NICAM or BTSC\n"
+	" 4: use SECAM/K3 instead of K1\n"
+	" 8: use PAL-D/K audio for SECAM-D/K\n"
+	"16: use FM radio input 1 instead of input 2\n"
+	"32: use mono audio (the lower three bits are ignored)");
+
+static char firmware_name[30];
+module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0);
+MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
+	"default firmware name.");
+
+static DEFINE_MUTEX(xc4000_list_mutex);
+static LIST_HEAD(hybrid_tuner_instance_list);
+
+#define dprintk(level, fmt, arg...) if (debug >= level) \
+	printk(KERN_INFO "%s: " fmt, "xc4000", ## arg)
+
+/* struct for storing firmware table */
+struct firmware_description {
+	unsigned int  type;
+	v4l2_std_id   id;
+	__u16         int_freq;
+	unsigned char *ptr;
+	unsigned int  size;
+};
+
+struct firmware_properties {
+	unsigned int	type;
+	v4l2_std_id	id;
+	v4l2_std_id	std_req;
+	__u16		int_freq;
+	unsigned int	scode_table;
+	int		scode_nr;
+};
+
+struct xc4000_priv {
+	struct tuner_i2c_props i2c_props;
+	struct list_head hybrid_tuner_instance_list;
+	struct firmware_description *firm;
+	int	firm_size;
+	u32	if_khz;
+	u32	freq_hz;
+	u32	bandwidth;
+	u8	video_standard;
+	u8	rf_mode;
+	u8	default_pm;
+	u8	dvb_amplitude;
+	u8	set_smoothedcvbs;
+	u8	ignore_i2c_write_errors;
+	__u16	firm_version;
+	struct firmware_properties cur_fw;
+	__u16	hwmodel;
+	__u16	hwvers;
+	struct mutex	lock;
+};
+
+#define XC4000_AUDIO_STD_B		 1
+#define XC4000_AUDIO_STD_A2		 2
+#define XC4000_AUDIO_STD_K3		 4
+#define XC4000_AUDIO_STD_L		 8
+#define XC4000_AUDIO_STD_INPUT1		16
+#define XC4000_AUDIO_STD_MONO		32
+
+#define XC4000_DEFAULT_FIRMWARE "dvb-fe-xc4000-1.4.fw"
+
+/* Misc Defines */
+#define MAX_TV_STANDARD			24
+#define XC_MAX_I2C_WRITE_LENGTH		64
+#define XC_POWERED_DOWN			0x80000000U
+
+/* Signal Types */
+#define XC_RF_MODE_AIR			0
+#define XC_RF_MODE_CABLE		1
+
+/* Product id */
+#define XC_PRODUCT_ID_FW_NOT_LOADED	0x2000
+#define XC_PRODUCT_ID_XC4000		0x0FA0
+#define XC_PRODUCT_ID_XC4100		0x1004
+
+/* Registers (Write-only) */
+#define XREG_INIT         0x00
+#define XREG_VIDEO_MODE   0x01
+#define XREG_AUDIO_MODE   0x02
+#define XREG_RF_FREQ      0x03
+#define XREG_D_CODE       0x04
+#define XREG_DIRECTSITTING_MODE 0x05
+#define XREG_SEEK_MODE    0x06
+#define XREG_POWER_DOWN   0x08
+#define XREG_SIGNALSOURCE 0x0A
+#define XREG_SMOOTHEDCVBS 0x0E
+#define XREG_AMPLITUDE    0x10
+
+/* Registers (Read-only) */
+#define XREG_ADC_ENV      0x00
+#define XREG_QUALITY      0x01
+#define XREG_FRAME_LINES  0x02
+#define XREG_HSYNC_FREQ   0x03
+#define XREG_LOCK         0x04
+#define XREG_FREQ_ERROR   0x05
+#define XREG_SNR          0x06
+#define XREG_VERSION      0x07
+#define XREG_PRODUCT_ID   0x08
+
+/*
+   Basic firmware description. This will remain with
+   the driver for documentation purposes.
+
+   This represents an I2C firmware file encoded as a
+   string of unsigned char. Format is as follows:
+
+   char[0  ]=len0_MSB  -> len = len_MSB * 256 + len_LSB
+   char[1  ]=len0_LSB  -> length of first write transaction
+   char[2  ]=data0 -> first byte to be sent
+   char[3  ]=data1
+   char[4  ]=data2
+   char[   ]=...
+   char[M  ]=dataN  -> last byte to be sent
+   char[M+1]=len1_MSB  -> len = len_MSB * 256 + len_LSB
+   char[M+2]=len1_LSB  -> length of second write transaction
+   char[M+3]=data0
+   char[M+4]=data1
+   ...
+   etc.
+
+   The [len] value should be interpreted as follows:
+
+   len= len_MSB _ len_LSB
+   len=1111_1111_1111_1111   : End of I2C_SEQUENCE
+   len=0000_0000_0000_0000   : Reset command: Do hardware reset
+   len=0NNN_NNNN_NNNN_NNNN   : Normal transaction: number of bytes = {1:32767)
+   len=1WWW_WWWW_WWWW_WWWW   : Wait command: wait for {1:32767} ms
+
+   For the RESET and WAIT commands, the two following bytes will contain
+   immediately the length of the following transaction.
+*/
+
+struct XC_TV_STANDARD {
+	const char  *Name;
+	u16	    audio_mode;
+	u16	    video_mode;
+	u16	    int_freq;
+};
+
+/* Tuner standards */
+#define XC4000_MN_NTSC_PAL_BTSC		0
+#define XC4000_MN_NTSC_PAL_A2		1
+#define XC4000_MN_NTSC_PAL_EIAJ		2
+#define XC4000_MN_NTSC_PAL_Mono		3
+#define XC4000_BG_PAL_A2		4
+#define XC4000_BG_PAL_NICAM		5
+#define XC4000_BG_PAL_MONO		6
+#define XC4000_I_PAL_NICAM		7
+#define XC4000_I_PAL_NICAM_MONO		8
+#define XC4000_DK_PAL_A2		9
+#define XC4000_DK_PAL_NICAM		10
+#define XC4000_DK_PAL_MONO		11
+#define XC4000_DK_SECAM_A2DK1		12
+#define XC4000_DK_SECAM_A2LDK3		13
+#define XC4000_DK_SECAM_A2MONO		14
+#define XC4000_DK_SECAM_NICAM		15
+#define XC4000_L_SECAM_NICAM		16
+#define XC4000_LC_SECAM_NICAM		17
+#define XC4000_DTV6			18
+#define XC4000_DTV8			19
+#define XC4000_DTV7_8			20
+#define XC4000_DTV7			21
+#define XC4000_FM_Radio_INPUT2		22
+#define XC4000_FM_Radio_INPUT1		23
+
+static struct XC_TV_STANDARD xc4000_standard[MAX_TV_STANDARD] = {
+	{"M/N-NTSC/PAL-BTSC",	0x0000, 0x80A0, 4500},
+	{"M/N-NTSC/PAL-A2",	0x0000, 0x80A0, 4600},
+	{"M/N-NTSC/PAL-EIAJ",	0x0040, 0x80A0, 4500},
+	{"M/N-NTSC/PAL-Mono",	0x0078, 0x80A0, 4500},
+	{"B/G-PAL-A2",		0x0000, 0x8159, 5640},
+	{"B/G-PAL-NICAM",	0x0004, 0x8159, 5740},
+	{"B/G-PAL-MONO",	0x0078, 0x8159, 5500},
+	{"I-PAL-NICAM",		0x0080, 0x8049, 6240},
+	{"I-PAL-NICAM-MONO",	0x0078, 0x8049, 6000},
+	{"D/K-PAL-A2",		0x0000, 0x8049, 6380},
+	{"D/K-PAL-NICAM",	0x0080, 0x8049, 6200},
+	{"D/K-PAL-MONO",	0x0078, 0x8049, 6500},
+	{"D/K-SECAM-A2 DK1",	0x0000, 0x8049, 6340},
+	{"D/K-SECAM-A2 L/DK3",	0x0000, 0x8049, 6000},
+	{"D/K-SECAM-A2 MONO",	0x0078, 0x8049, 6500},
+	{"D/K-SECAM-NICAM",	0x0080, 0x8049, 6200},
+	{"L-SECAM-NICAM",	0x8080, 0x0009, 6200},
+	{"L'-SECAM-NICAM",	0x8080, 0x4009, 6200},
+	{"DTV6",		0x00C0, 0x8002,    0},
+	{"DTV8",		0x00C0, 0x800B,    0},
+	{"DTV7/8",		0x00C0, 0x801B,    0},
+	{"DTV7",		0x00C0, 0x8007,    0},
+	{"FM Radio-INPUT2",	0x0008, 0x9800, 10700},
+	{"FM Radio-INPUT1",	0x0008, 0x9000, 10700}
+};
+
+static int xc4000_readreg(struct xc4000_priv *priv, u16 reg, u16 *val);
+static int xc4000_tuner_reset(struct dvb_frontend *fe);
+static void xc_debug_dump(struct xc4000_priv *priv);
+
+static int xc_send_i2c_data(struct xc4000_priv *priv, u8 *buf, int len)
+{
+	struct i2c_msg msg = { .addr = priv->i2c_props.addr,
+			       .flags = 0, .buf = buf, .len = len };
+	if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
+		if (priv->ignore_i2c_write_errors == 0) {
+			printk(KERN_ERR "xc4000: I2C write failed (len=%i)\n",
+			       len);
+			if (len == 4) {
+				printk(KERN_ERR "bytes %02x %02x %02x %02x\n", buf[0],
+				       buf[1], buf[2], buf[3]);
+			}
+			return -EREMOTEIO;
+		}
+	}
+	return 0;
+}
+
+static int xc4000_tuner_reset(struct dvb_frontend *fe)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	int ret;
+
+	dprintk(1, "%s()\n", __func__);
+
+	if (fe->callback) {
+		ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
+					   fe->dvb->priv :
+					   priv->i2c_props.adap->algo_data,
+					   DVB_FRONTEND_COMPONENT_TUNER,
+					   XC4000_TUNER_RESET, 0);
+		if (ret) {
+			printk(KERN_ERR "xc4000: reset failed\n");
+			return -EREMOTEIO;
+		}
+	} else {
+		printk(KERN_ERR "xc4000: no tuner reset callback function, "
+				"fatal\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int xc_write_reg(struct xc4000_priv *priv, u16 regAddr, u16 i2cData)
+{
+	u8 buf[4];
+	int result;
+
+	buf[0] = (regAddr >> 8) & 0xFF;
+	buf[1] = regAddr & 0xFF;
+	buf[2] = (i2cData >> 8) & 0xFF;
+	buf[3] = i2cData & 0xFF;
+	result = xc_send_i2c_data(priv, buf, 4);
+
+	return result;
+}
+
+static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+
+	int i, nbytes_to_send, result;
+	unsigned int len, pos, index;
+	u8 buf[XC_MAX_I2C_WRITE_LENGTH];
+
+	index = 0;
+	while ((i2c_sequence[index] != 0xFF) ||
+		(i2c_sequence[index + 1] != 0xFF)) {
+		len = i2c_sequence[index] * 256 + i2c_sequence[index+1];
+		if (len == 0x0000) {
+			/* RESET command */
+			/* NOTE: this is ignored, as the reset callback was */
+			/* already called by check_firmware() */
+			index += 2;
+		} else if (len & 0x8000) {
+			/* WAIT command */
+			msleep(len & 0x7FFF);
+			index += 2;
+		} else {
+			/* Send i2c data whilst ensuring individual transactions
+			 * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes.
+			 */
+			index += 2;
+			buf[0] = i2c_sequence[index];
+			buf[1] = i2c_sequence[index + 1];
+			pos = 2;
+			while (pos < len) {
+				if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2)
+					nbytes_to_send =
+						XC_MAX_I2C_WRITE_LENGTH;
+				else
+					nbytes_to_send = (len - pos + 2);
+				for (i = 2; i < nbytes_to_send; i++) {
+					buf[i] = i2c_sequence[index + pos +
+						i - 2];
+				}
+				result = xc_send_i2c_data(priv, buf,
+					nbytes_to_send);
+
+				if (result != 0)
+					return result;
+
+				pos += nbytes_to_send - 2;
+			}
+			index += len;
+		}
+	}
+	return 0;
+}
+
+static int xc_set_tv_standard(struct xc4000_priv *priv,
+	u16 video_mode, u16 audio_mode)
+{
+	int ret;
+	dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, video_mode, audio_mode);
+	dprintk(1, "%s() Standard = %s\n",
+		__func__,
+		xc4000_standard[priv->video_standard].Name);
+
+	/* Don't complain when the request fails because of i2c stretching */
+	priv->ignore_i2c_write_errors = 1;
+
+	ret = xc_write_reg(priv, XREG_VIDEO_MODE, video_mode);
+	if (ret == 0)
+		ret = xc_write_reg(priv, XREG_AUDIO_MODE, audio_mode);
+
+	priv->ignore_i2c_write_errors = 0;
+
+	return ret;
+}
+
+static int xc_set_signal_source(struct xc4000_priv *priv, u16 rf_mode)
+{
+	dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
+		rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
+
+	if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) {
+		rf_mode = XC_RF_MODE_CABLE;
+		printk(KERN_ERR
+			"%s(), Invalid mode, defaulting to CABLE",
+			__func__);
+	}
+	return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode);
+}
+
+static const struct dvb_tuner_ops xc4000_tuner_ops;
+
+static int xc_set_rf_frequency(struct xc4000_priv *priv, u32 freq_hz)
+{
+	u16 freq_code;
+
+	dprintk(1, "%s(%u)\n", __func__, freq_hz);
+
+	if ((freq_hz > xc4000_tuner_ops.info.frequency_max) ||
+	    (freq_hz < xc4000_tuner_ops.info.frequency_min))
+		return -EINVAL;
+
+	freq_code = (u16)(freq_hz / 15625);
+
+	/* WAS: Starting in firmware version 1.1.44, Xceive recommends using the
+	   FINERFREQ for all normal tuning (the doc indicates reg 0x03 should
+	   only be used for fast scanning for channel lock) */
+	/* WAS: XREG_FINERFREQ */
+	return xc_write_reg(priv, XREG_RF_FREQ, freq_code);
+}
+
+static int xc_get_adc_envelope(struct xc4000_priv *priv, u16 *adc_envelope)
+{
+	return xc4000_readreg(priv, XREG_ADC_ENV, adc_envelope);
+}
+
+static int xc_get_frequency_error(struct xc4000_priv *priv, u32 *freq_error_hz)
+{
+	int result;
+	u16 regData;
+	u32 tmp;
+
+	result = xc4000_readreg(priv, XREG_FREQ_ERROR, &regData);
+	if (result != 0)
+		return result;
+
+	tmp = (u32)regData & 0xFFFFU;
+	tmp = (tmp < 0x8000U ? tmp : 0x10000U - tmp);
+	(*freq_error_hz) = tmp * 15625;
+	return result;
+}
+
+static int xc_get_lock_status(struct xc4000_priv *priv, u16 *lock_status)
+{
+	return xc4000_readreg(priv, XREG_LOCK, lock_status);
+}
+
+static int xc_get_version(struct xc4000_priv *priv,
+	u8 *hw_majorversion, u8 *hw_minorversion,
+	u8 *fw_majorversion, u8 *fw_minorversion)
+{
+	u16 data;
+	int result;
+
+	result = xc4000_readreg(priv, XREG_VERSION, &data);
+	if (result != 0)
+		return result;
+
+	(*hw_majorversion) = (data >> 12) & 0x0F;
+	(*hw_minorversion) = (data >>  8) & 0x0F;
+	(*fw_majorversion) = (data >>  4) & 0x0F;
+	(*fw_minorversion) = data & 0x0F;
+
+	return 0;
+}
+
+static int xc_get_hsync_freq(struct xc4000_priv *priv, u32 *hsync_freq_hz)
+{
+	u16 regData;
+	int result;
+
+	result = xc4000_readreg(priv, XREG_HSYNC_FREQ, &regData);
+	if (result != 0)
+		return result;
+
+	(*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100;
+	return result;
+}
+
+static int xc_get_frame_lines(struct xc4000_priv *priv, u16 *frame_lines)
+{
+	return xc4000_readreg(priv, XREG_FRAME_LINES, frame_lines);
+}
+
+static int xc_get_quality(struct xc4000_priv *priv, u16 *quality)
+{
+	return xc4000_readreg(priv, XREG_QUALITY, quality);
+}
+
+static u16 xc_wait_for_lock(struct xc4000_priv *priv)
+{
+	u16	lock_state = 0;
+	int	watchdog_count = 40;
+
+	while ((lock_state == 0) && (watchdog_count > 0)) {
+		xc_get_lock_status(priv, &lock_state);
+		if (lock_state != 1) {
+			msleep(5);
+			watchdog_count--;
+		}
+	}
+	return lock_state;
+}
+
+static int xc_tune_channel(struct xc4000_priv *priv, u32 freq_hz)
+{
+	int	found = 1;
+	int	result;
+
+	dprintk(1, "%s(%u)\n", __func__, freq_hz);
+
+	/* Don't complain when the request fails because of i2c stretching */
+	priv->ignore_i2c_write_errors = 1;
+	result = xc_set_rf_frequency(priv, freq_hz);
+	priv->ignore_i2c_write_errors = 0;
+
+	if (result != 0)
+		return 0;
+
+	/* wait for lock only in analog TV mode */
+	if ((priv->cur_fw.type & (FM | DTV6 | DTV7 | DTV78 | DTV8)) == 0) {
+		if (xc_wait_for_lock(priv) != 1)
+			found = 0;
+	}
+
+	/* Wait for stats to stabilize.
+	 * Frame Lines needs two frame times after initial lock
+	 * before it is valid.
+	 */
+	msleep(debug ? 100 : 10);
+
+	if (debug)
+		xc_debug_dump(priv);
+
+	return found;
+}
+
+static int xc4000_readreg(struct xc4000_priv *priv, u16 reg, u16 *val)
+{
+	u8 buf[2] = { reg >> 8, reg & 0xff };
+	u8 bval[2] = { 0, 0 };
+	struct i2c_msg msg[2] = {
+		{ .addr = priv->i2c_props.addr,
+			.flags = 0, .buf = &buf[0], .len = 2 },
+		{ .addr = priv->i2c_props.addr,
+			.flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
+	};
+
+	if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
+		printk(KERN_ERR "xc4000: I2C read failed\n");
+		return -EREMOTEIO;
+	}
+
+	*val = (bval[0] << 8) | bval[1];
+	return 0;
+}
+
+#define dump_firm_type(t)	dump_firm_type_and_int_freq(t, 0)
+static void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq)
+{
+	 if (type & BASE)
+		printk(KERN_CONT "BASE ");
+	 if (type & INIT1)
+		printk(KERN_CONT "INIT1 ");
+	 if (type & F8MHZ)
+		printk(KERN_CONT "F8MHZ ");
+	 if (type & MTS)
+		printk(KERN_CONT "MTS ");
+	 if (type & D2620)
+		printk(KERN_CONT "D2620 ");
+	 if (type & D2633)
+		printk(KERN_CONT "D2633 ");
+	 if (type & DTV6)
+		printk(KERN_CONT "DTV6 ");
+	 if (type & QAM)
+		printk(KERN_CONT "QAM ");
+	 if (type & DTV7)
+		printk(KERN_CONT "DTV7 ");
+	 if (type & DTV78)
+		printk(KERN_CONT "DTV78 ");
+	 if (type & DTV8)
+		printk(KERN_CONT "DTV8 ");
+	 if (type & FM)
+		printk(KERN_CONT "FM ");
+	 if (type & INPUT1)
+		printk(KERN_CONT "INPUT1 ");
+	 if (type & LCD)
+		printk(KERN_CONT "LCD ");
+	 if (type & NOGD)
+		printk(KERN_CONT "NOGD ");
+	 if (type & MONO)
+		printk(KERN_CONT "MONO ");
+	 if (type & ATSC)
+		printk(KERN_CONT "ATSC ");
+	 if (type & IF)
+		printk(KERN_CONT "IF ");
+	 if (type & LG60)
+		printk(KERN_CONT "LG60 ");
+	 if (type & ATI638)
+		printk(KERN_CONT "ATI638 ");
+	 if (type & OREN538)
+		printk(KERN_CONT "OREN538 ");
+	 if (type & OREN36)
+		printk(KERN_CONT "OREN36 ");
+	 if (type & TOYOTA388)
+		printk(KERN_CONT "TOYOTA388 ");
+	 if (type & TOYOTA794)
+		printk(KERN_CONT "TOYOTA794 ");
+	 if (type & DIBCOM52)
+		printk(KERN_CONT "DIBCOM52 ");
+	 if (type & ZARLINK456)
+		printk(KERN_CONT "ZARLINK456 ");
+	 if (type & CHINA)
+		printk(KERN_CONT "CHINA ");
+	 if (type & F6MHZ)
+		printk(KERN_CONT "F6MHZ ");
+	 if (type & INPUT2)
+		printk(KERN_CONT "INPUT2 ");
+	 if (type & SCODE)
+		printk(KERN_CONT "SCODE ");
+	 if (type & HAS_IF)
+		printk(KERN_CONT "HAS_IF_%d ", int_freq);
+}
+
+static int seek_firmware(struct dvb_frontend *fe, unsigned int type,
+			 v4l2_std_id *id)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	int		i, best_i = -1;
+	unsigned int	best_nr_diffs = 255U;
+
+	if (!priv->firm) {
+		printk(KERN_ERR "Error! firmware not loaded\n");
+		return -EINVAL;
+	}
+
+	if (((type & ~SCODE) == 0) && (*id == 0))
+		*id = V4L2_STD_PAL;
+
+	/* Seek for generic video standard match */
+	for (i = 0; i < priv->firm_size; i++) {
+		v4l2_std_id	id_diff_mask =
+			(priv->firm[i].id ^ (*id)) & (*id);
+		unsigned int	type_diff_mask =
+			(priv->firm[i].type ^ type)
+			& (BASE_TYPES | DTV_TYPES | LCD | NOGD | MONO | SCODE);
+		unsigned int	nr_diffs;
+
+		if (type_diff_mask
+		    & (BASE | INIT1 | FM | DTV6 | DTV7 | DTV78 | DTV8 | SCODE))
+			continue;
+
+		nr_diffs = hweight64(id_diff_mask) + hweight32(type_diff_mask);
+		if (!nr_diffs)	/* Supports all the requested standards */
+			goto found;
+
+		if (nr_diffs < best_nr_diffs) {
+			best_nr_diffs = nr_diffs;
+			best_i = i;
+		}
+	}
+
+	/* FIXME: Would make sense to seek for type "hint" match ? */
+	if (best_i < 0) {
+		i = -ENOENT;
+		goto ret;
+	}
+
+	if (best_nr_diffs > 0U) {
+		printk(KERN_WARNING
+		       "Selecting best matching firmware (%u bits differ) for "
+		       "type=(%x), id %016llx:\n",
+		       best_nr_diffs, type, (unsigned long long)*id);
+		i = best_i;
+	}
+
+found:
+	*id = priv->firm[i].id;
+
+ret:
+	if (debug) {
+		printk(KERN_DEBUG "%s firmware for type=",
+		       (i < 0) ? "Can't find" : "Found");
+		dump_firm_type(type);
+		printk(KERN_DEBUG "(%x), id %016llx.\n", type, (unsigned long long)*id);
+	}
+	return i;
+}
+
+static int load_firmware(struct dvb_frontend *fe, unsigned int type,
+			 v4l2_std_id *id)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	int                pos, rc;
+	unsigned char      *p;
+
+	pos = seek_firmware(fe, type, id);
+	if (pos < 0)
+		return pos;
+
+	p = priv->firm[pos].ptr;
+
+	/* Don't complain when the request fails because of i2c stretching */
+	priv->ignore_i2c_write_errors = 1;
+
+	rc = xc_load_i2c_sequence(fe, p);
+
+	priv->ignore_i2c_write_errors = 0;
+
+	return rc;
+}
+
+static int xc4000_fwupload(struct dvb_frontend *fe)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	const struct firmware *fw   = NULL;
+	const unsigned char   *p, *endp;
+	int                   rc = 0;
+	int		      n, n_array;
+	char		      name[33];
+	const char	      *fname;
+
+	if (firmware_name[0] != '\0')
+		fname = firmware_name;
+	else
+		fname = XC4000_DEFAULT_FIRMWARE;
+
+	dprintk(1, "Reading firmware %s\n", fname);
+	rc = request_firmware(&fw, fname, priv->i2c_props.adap->dev.parent);
+	if (rc < 0) {
+		if (rc == -ENOENT)
+			printk(KERN_ERR "Error: firmware %s not found.\n", fname);
+		else
+			printk(KERN_ERR "Error %d while requesting firmware %s\n",
+			       rc, fname);
+
+		return rc;
+	}
+	p = fw->data;
+	endp = p + fw->size;
+
+	if (fw->size < sizeof(name) - 1 + 2 + 2) {
+		printk(KERN_ERR "Error: firmware file %s has invalid size!\n",
+		       fname);
+		goto corrupt;
+	}
+
+	memcpy(name, p, sizeof(name) - 1);
+	name[sizeof(name) - 1] = '\0';
+	p += sizeof(name) - 1;
+
+	priv->firm_version = get_unaligned_le16(p);
+	p += 2;
+
+	n_array = get_unaligned_le16(p);
+	p += 2;
+
+	dprintk(1, "Loading %d firmware images from %s, type: %s, ver %d.%d\n",
+		n_array, fname, name,
+		priv->firm_version >> 8, priv->firm_version & 0xff);
+
+	priv->firm = kzalloc(sizeof(*priv->firm) * n_array, GFP_KERNEL);
+	if (priv->firm == NULL) {
+		printk(KERN_ERR "Not enough memory to load firmware file.\n");
+		rc = -ENOMEM;
+		goto done;
+	}
+	priv->firm_size = n_array;
+
+	n = -1;
+	while (p < endp) {
+		__u32 type, size;
+		v4l2_std_id id;
+		__u16 int_freq = 0;
+
+		n++;
+		if (n >= n_array) {
+			printk(KERN_ERR "More firmware images in file than "
+			       "were expected!\n");
+			goto corrupt;
+		}
+
+		/* Checks if there's enough bytes to read */
+		if (endp - p < sizeof(type) + sizeof(id) + sizeof(size))
+			goto header;
+
+		type = get_unaligned_le32(p);
+		p += sizeof(type);
+
+		id = get_unaligned_le64(p);
+		p += sizeof(id);
+
+		if (type & HAS_IF) {
+			int_freq = get_unaligned_le16(p);
+			p += sizeof(int_freq);
+			if (endp - p < sizeof(size))
+				goto header;
+		}
+
+		size = get_unaligned_le32(p);
+		p += sizeof(size);
+
+		if (!size || size > endp - p) {
+			printk(KERN_ERR "Firmware type (%x), id %llx is corrupted (size=%d, expected %d)\n",
+			       type, (unsigned long long)id,
+			       (unsigned)(endp - p), size);
+			goto corrupt;
+		}
+
+		priv->firm[n].ptr = kzalloc(size, GFP_KERNEL);
+		if (priv->firm[n].ptr == NULL) {
+			printk(KERN_ERR "Not enough memory to load firmware file.\n");
+			rc = -ENOMEM;
+			goto done;
+		}
+
+		if (debug) {
+			printk(KERN_DEBUG "Reading firmware type ");
+			dump_firm_type_and_int_freq(type, int_freq);
+			printk(KERN_DEBUG "(%x), id %llx, size=%d.\n",
+			       type, (unsigned long long)id, size);
+		}
+
+		memcpy(priv->firm[n].ptr, p, size);
+		priv->firm[n].type = type;
+		priv->firm[n].id   = id;
+		priv->firm[n].size = size;
+		priv->firm[n].int_freq = int_freq;
+
+		p += size;
+	}
+
+	if (n + 1 != priv->firm_size) {
+		printk(KERN_ERR "Firmware file is incomplete!\n");
+		goto corrupt;
+	}
+
+	goto done;
+
+header:
+	printk(KERN_ERR "Firmware header is incomplete!\n");
+corrupt:
+	rc = -EINVAL;
+	printk(KERN_ERR "Error: firmware file is corrupted!\n");
+
+done:
+	release_firmware(fw);
+	if (rc == 0)
+		dprintk(1, "Firmware files loaded.\n");
+
+	return rc;
+}
+
+static int load_scode(struct dvb_frontend *fe, unsigned int type,
+			 v4l2_std_id *id, __u16 int_freq, int scode)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	int		pos, rc;
+	unsigned char	*p;
+	u8		scode_buf[13];
+	u8		indirect_mode[5];
+
+	dprintk(1, "%s called int_freq=%d\n", __func__, int_freq);
+
+	if (!int_freq) {
+		pos = seek_firmware(fe, type, id);
+		if (pos < 0)
+			return pos;
+	} else {
+		for (pos = 0; pos < priv->firm_size; pos++) {
+			if ((priv->firm[pos].int_freq == int_freq) &&
+			    (priv->firm[pos].type & HAS_IF))
+				break;
+		}
+		if (pos == priv->firm_size)
+			return -ENOENT;
+	}
+
+	p = priv->firm[pos].ptr;
+
+	if (priv->firm[pos].size != 12 * 16 || scode >= 16)
+		return -EINVAL;
+	p += 12 * scode;
+
+	if (debug) {
+		tuner_info("Loading SCODE for type=");
+		dump_firm_type_and_int_freq(priv->firm[pos].type,
+					    priv->firm[pos].int_freq);
+		printk(KERN_CONT "(%x), id %016llx.\n", priv->firm[pos].type,
+		       (unsigned long long)*id);
+	}
+
+	scode_buf[0] = 0x00;
+	memcpy(&scode_buf[1], p, 12);
+
+	/* Enter direct-mode */
+	rc = xc_write_reg(priv, XREG_DIRECTSITTING_MODE, 0);
+	if (rc < 0) {
+		printk(KERN_ERR "failed to put device into direct mode!\n");
+		return -EIO;
+	}
+
+	rc = xc_send_i2c_data(priv, scode_buf, 13);
+	if (rc != 0) {
+		/* Even if the send failed, make sure we set back to indirect
+		   mode */
+		printk(KERN_ERR "Failed to set scode %d\n", rc);
+	}
+
+	/* Switch back to indirect-mode */
+	memset(indirect_mode, 0, sizeof(indirect_mode));
+	indirect_mode[4] = 0x88;
+	xc_send_i2c_data(priv, indirect_mode, sizeof(indirect_mode));
+	msleep(10);
+
+	return 0;
+}
+
+static int check_firmware(struct dvb_frontend *fe, unsigned int type,
+			  v4l2_std_id std, __u16 int_freq)
+{
+	struct xc4000_priv         *priv = fe->tuner_priv;
+	struct firmware_properties new_fw;
+	int			   rc = 0, is_retry = 0;
+	u16			   hwmodel;
+	v4l2_std_id		   std0;
+	u8			   hw_major, hw_minor, fw_major, fw_minor;
+
+	dprintk(1, "%s called\n", __func__);
+
+	if (!priv->firm) {
+		rc = xc4000_fwupload(fe);
+		if (rc < 0)
+			return rc;
+	}
+
+retry:
+	new_fw.type = type;
+	new_fw.id = std;
+	new_fw.std_req = std;
+	new_fw.scode_table = SCODE;
+	new_fw.scode_nr = 0;
+	new_fw.int_freq = int_freq;
+
+	dprintk(1, "checking firmware, user requested type=");
+	if (debug) {
+		dump_firm_type(new_fw.type);
+		printk(KERN_CONT "(%x), id %016llx, ", new_fw.type,
+		       (unsigned long long)new_fw.std_req);
+		if (!int_freq)
+			printk(KERN_CONT "scode_tbl ");
+		else
+			printk(KERN_CONT "int_freq %d, ", new_fw.int_freq);
+		printk(KERN_CONT "scode_nr %d\n", new_fw.scode_nr);
+	}
+
+	/* No need to reload base firmware if it matches */
+	if (priv->cur_fw.type & BASE) {
+		dprintk(1, "BASE firmware not changed.\n");
+		goto skip_base;
+	}
+
+	/* Updating BASE - forget about all currently loaded firmware */
+	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
+
+	/* Reset is needed before loading firmware */
+	rc = xc4000_tuner_reset(fe);
+	if (rc < 0)
+		goto fail;
+
+	/* BASE firmwares are all std0 */
+	std0 = 0;
+	rc = load_firmware(fe, BASE, &std0);
+	if (rc < 0) {
+		printk(KERN_ERR "Error %d while loading base firmware\n", rc);
+		goto fail;
+	}
+
+	/* Load INIT1, if needed */
+	dprintk(1, "Load init1 firmware, if exists\n");
+
+	rc = load_firmware(fe, BASE | INIT1, &std0);
+	if (rc == -ENOENT)
+		rc = load_firmware(fe, BASE | INIT1, &std0);
+	if (rc < 0 && rc != -ENOENT) {
+		tuner_err("Error %d while loading init1 firmware\n",
+			  rc);
+		goto fail;
+	}
+
+skip_base:
+	/*
+	 * No need to reload standard specific firmware if base firmware
+	 * was not reloaded and requested video standards have not changed.
+	 */
+	if (priv->cur_fw.type == (BASE | new_fw.type) &&
+	    priv->cur_fw.std_req == std) {
+		dprintk(1, "Std-specific firmware already loaded.\n");
+		goto skip_std_specific;
+	}
+
+	/* Reloading std-specific firmware forces a SCODE update */
+	priv->cur_fw.scode_table = 0;
+
+	/* Load the standard firmware */
+	rc = load_firmware(fe, new_fw.type, &new_fw.id);
+
+	if (rc < 0)
+		goto fail;
+
+skip_std_specific:
+	if (priv->cur_fw.scode_table == new_fw.scode_table &&
+	    priv->cur_fw.scode_nr == new_fw.scode_nr) {
+		dprintk(1, "SCODE firmware already loaded.\n");
+		goto check_device;
+	}
+
+	/* Load SCODE firmware, if exists */
+	rc = load_scode(fe, new_fw.type | new_fw.scode_table, &new_fw.id,
+			new_fw.int_freq, new_fw.scode_nr);
+	if (rc != 0)
+		dprintk(1, "load scode failed %d\n", rc);
+
+check_device:
+	rc = xc4000_readreg(priv, XREG_PRODUCT_ID, &hwmodel);
+
+	if (xc_get_version(priv, &hw_major, &hw_minor, &fw_major,
+			   &fw_minor) != 0) {
+		printk(KERN_ERR "Unable to read tuner registers.\n");
+		goto fail;
+	}
+
+	dprintk(1, "Device is Xceive %d version %d.%d, "
+		"firmware version %d.%d\n",
+		hwmodel, hw_major, hw_minor, fw_major, fw_minor);
+
+	/* Check firmware version against what we downloaded. */
+	if (priv->firm_version != ((fw_major << 8) | fw_minor)) {
+		printk(KERN_WARNING
+		       "Incorrect readback of firmware version %d.%d.\n",
+		       fw_major, fw_minor);
+		goto fail;
+	}
+
+	/* Check that the tuner hardware model remains consistent over time. */
+	if (priv->hwmodel == 0 &&
+	    (hwmodel == XC_PRODUCT_ID_XC4000 ||
+	     hwmodel == XC_PRODUCT_ID_XC4100)) {
+		priv->hwmodel = hwmodel;
+		priv->hwvers = (hw_major << 8) | hw_minor;
+	} else if (priv->hwmodel == 0 || priv->hwmodel != hwmodel ||
+		   priv->hwvers != ((hw_major << 8) | hw_minor)) {
+		printk(KERN_WARNING
+		       "Read invalid device hardware information - tuner "
+		       "hung?\n");
+		goto fail;
+	}
+
+	memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw));
+
+	/*
+	 * By setting BASE in cur_fw.type only after successfully loading all
+	 * firmwares, we can:
+	 * 1. Identify that BASE firmware with type=0 has been loaded;
+	 * 2. Tell whether BASE firmware was just changed the next time through.
+	 */
+	priv->cur_fw.type |= BASE;
+
+	return 0;
+
+fail:
+	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
+	if (!is_retry) {
+		msleep(50);
+		is_retry = 1;
+		dprintk(1, "Retrying firmware load\n");
+		goto retry;
+	}
+
+	if (rc == -ENOENT)
+		rc = -EINVAL;
+	return rc;
+}
+
+static void xc_debug_dump(struct xc4000_priv *priv)
+{
+	u16	adc_envelope;
+	u32	freq_error_hz = 0;
+	u16	lock_status;
+	u32	hsync_freq_hz = 0;
+	u16	frame_lines;
+	u16	quality;
+	u8	hw_majorversion = 0, hw_minorversion = 0;
+	u8	fw_majorversion = 0, fw_minorversion = 0;
+
+	xc_get_adc_envelope(priv, &adc_envelope);
+	dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);
+
+	xc_get_frequency_error(priv, &freq_error_hz);
+	dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);
+
+	xc_get_lock_status(priv, &lock_status);
+	dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",
+		lock_status);
+
+	xc_get_version(priv, &hw_majorversion, &hw_minorversion,
+		       &fw_majorversion, &fw_minorversion);
+	dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n",
+		hw_majorversion, hw_minorversion,
+		fw_majorversion, fw_minorversion);
+
+	if (priv->video_standard < XC4000_DTV6) {
+		xc_get_hsync_freq(priv, &hsync_freq_hz);
+		dprintk(1, "*** Horizontal sync frequency = %d Hz\n",
+			hsync_freq_hz);
+
+		xc_get_frame_lines(priv, &frame_lines);
+		dprintk(1, "*** Frame lines = %d\n", frame_lines);
+	}
+
+	xc_get_quality(priv, &quality);
+	dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality);
+}
+
+static int xc4000_set_params(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	unsigned int type;
+	int	ret = -EREMOTEIO;
+
+	dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency);
+
+	mutex_lock(&priv->lock);
+
+	if (fe->ops.info.type == FE_ATSC) {
+		dprintk(1, "%s() ATSC\n", __func__);
+		switch (params->u.vsb.modulation) {
+		case VSB_8:
+		case VSB_16:
+			dprintk(1, "%s() VSB modulation\n", __func__);
+			priv->rf_mode = XC_RF_MODE_AIR;
+			priv->freq_hz = params->frequency - 1750000;
+			priv->bandwidth = BANDWIDTH_6_MHZ;
+			priv->video_standard = XC4000_DTV6;
+			type = DTV6;
+			break;
+		case QAM_64:
+		case QAM_256:
+		case QAM_AUTO:
+			dprintk(1, "%s() QAM modulation\n", __func__);
+			priv->rf_mode = XC_RF_MODE_CABLE;
+			priv->freq_hz = params->frequency - 1750000;
+			priv->bandwidth = BANDWIDTH_6_MHZ;
+			priv->video_standard = XC4000_DTV6;
+			type = DTV6;
+			break;
+		default:
+			ret = -EINVAL;
+			goto fail;
+		}
+	} else if (fe->ops.info.type == FE_OFDM) {
+		dprintk(1, "%s() OFDM\n", __func__);
+		switch (params->u.ofdm.bandwidth) {
+		case BANDWIDTH_6_MHZ:
+			priv->bandwidth = BANDWIDTH_6_MHZ;
+			priv->video_standard = XC4000_DTV6;
+			priv->freq_hz = params->frequency - 1750000;
+			type = DTV6;
+			break;
+		case BANDWIDTH_7_MHZ:
+			priv->bandwidth = BANDWIDTH_7_MHZ;
+			priv->video_standard = XC4000_DTV7;
+			priv->freq_hz = params->frequency - 2250000;
+			type = DTV7;
+			break;
+		case BANDWIDTH_8_MHZ:
+			priv->bandwidth = BANDWIDTH_8_MHZ;
+			priv->video_standard = XC4000_DTV8;
+			priv->freq_hz = params->frequency - 2750000;
+			type = DTV8;
+			break;
+		case BANDWIDTH_AUTO:
+			if (params->frequency < 400000000) {
+				priv->bandwidth = BANDWIDTH_7_MHZ;
+				priv->freq_hz = params->frequency - 2250000;
+			} else {
+				priv->bandwidth = BANDWIDTH_8_MHZ;
+				priv->freq_hz = params->frequency - 2750000;
+			}
+			priv->video_standard = XC4000_DTV7_8;
+			type = DTV78;
+			break;
+		default:
+			printk(KERN_ERR "xc4000 bandwidth not set!\n");
+			ret = -EINVAL;
+			goto fail;
+		}
+		priv->rf_mode = XC_RF_MODE_AIR;
+	} else {
+		printk(KERN_ERR "xc4000 modulation type not supported!\n");
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	dprintk(1, "%s() frequency=%d (compensated)\n",
+		__func__, priv->freq_hz);
+
+	/* Make sure the correct firmware type is loaded */
+	if (check_firmware(fe, type, 0, priv->if_khz) != 0)
+		goto fail;
+
+	ret = xc_set_signal_source(priv, priv->rf_mode);
+	if (ret != 0) {
+		printk(KERN_ERR "xc4000: xc_set_signal_source(%d) failed\n",
+		       priv->rf_mode);
+		goto fail;
+	} else {
+		u16	video_mode, audio_mode;
+		video_mode = xc4000_standard[priv->video_standard].video_mode;
+		audio_mode = xc4000_standard[priv->video_standard].audio_mode;
+		if (type == DTV6 && priv->firm_version != 0x0102)
+			video_mode |= 0x0001;
+		ret = xc_set_tv_standard(priv, video_mode, audio_mode);
+		if (ret != 0) {
+			printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n");
+			/* DJH - do not return when it fails... */
+			/* goto fail; */
+		}
+	}
+
+	if (xc_write_reg(priv, XREG_D_CODE, 0) == 0)
+		ret = 0;
+	if (priv->dvb_amplitude != 0) {
+		if (xc_write_reg(priv, XREG_AMPLITUDE,
+				 (priv->firm_version != 0x0102 ||
+				  priv->dvb_amplitude != 134 ?
+				  priv->dvb_amplitude : 132)) != 0)
+			ret = -EREMOTEIO;
+	}
+	if (priv->set_smoothedcvbs != 0) {
+		if (xc_write_reg(priv, XREG_SMOOTHEDCVBS, 1) != 0)
+			ret = -EREMOTEIO;
+	}
+	if (ret != 0) {
+		printk(KERN_ERR "xc4000: setting registers failed\n");
+		/* goto fail; */
+	}
+
+	xc_tune_channel(priv, priv->freq_hz);
+
+	ret = 0;
+
+fail:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int xc4000_set_analog_params(struct dvb_frontend *fe,
+	struct analog_parameters *params)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	unsigned int type = 0;
+	int	ret = -EREMOTEIO;
+
+	if (params->mode == V4L2_TUNER_RADIO) {
+		dprintk(1, "%s() frequency=%d (in units of 62.5Hz)\n",
+			__func__, params->frequency);
+
+		mutex_lock(&priv->lock);
+
+		params->std = 0;
+		priv->freq_hz = params->frequency * 125L / 2;
+
+		if (audio_std & XC4000_AUDIO_STD_INPUT1) {
+			priv->video_standard = XC4000_FM_Radio_INPUT1;
+			type = FM | INPUT1;
+		} else {
+			priv->video_standard = XC4000_FM_Radio_INPUT2;
+			type = FM | INPUT2;
+		}
+
+		goto tune_channel;
+	}
+
+	dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
+		__func__, params->frequency);
+
+	mutex_lock(&priv->lock);
+
+	/* params->frequency is in units of 62.5khz */
+	priv->freq_hz = params->frequency * 62500;
+
+	params->std &= V4L2_STD_ALL;
+	/* if std is not defined, choose one */
+	if (!params->std)
+		params->std = V4L2_STD_PAL_BG;
+
+	if (audio_std & XC4000_AUDIO_STD_MONO)
+		type = MONO;
+
+	if (params->std & V4L2_STD_MN) {
+		params->std = V4L2_STD_MN;
+		if (audio_std & XC4000_AUDIO_STD_MONO) {
+			priv->video_standard = XC4000_MN_NTSC_PAL_Mono;
+		} else if (audio_std & XC4000_AUDIO_STD_A2) {
+			params->std |= V4L2_STD_A2;
+			priv->video_standard = XC4000_MN_NTSC_PAL_A2;
+		} else {
+			params->std |= V4L2_STD_BTSC;
+			priv->video_standard = XC4000_MN_NTSC_PAL_BTSC;
+		}
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_PAL_BG) {
+		params->std = V4L2_STD_PAL_BG;
+		if (audio_std & XC4000_AUDIO_STD_MONO) {
+			priv->video_standard = XC4000_BG_PAL_MONO;
+		} else if (!(audio_std & XC4000_AUDIO_STD_A2)) {
+			if (!(audio_std & XC4000_AUDIO_STD_B)) {
+				params->std |= V4L2_STD_NICAM_A;
+				priv->video_standard = XC4000_BG_PAL_NICAM;
+			} else {
+				params->std |= V4L2_STD_NICAM_B;
+				priv->video_standard = XC4000_BG_PAL_NICAM;
+			}
+		} else {
+			if (!(audio_std & XC4000_AUDIO_STD_B)) {
+				params->std |= V4L2_STD_A2_A;
+				priv->video_standard = XC4000_BG_PAL_A2;
+			} else {
+				params->std |= V4L2_STD_A2_B;
+				priv->video_standard = XC4000_BG_PAL_A2;
+			}
+		}
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_PAL_I) {
+		/* default to NICAM audio standard */
+		params->std = V4L2_STD_PAL_I | V4L2_STD_NICAM;
+		if (audio_std & XC4000_AUDIO_STD_MONO)
+			priv->video_standard = XC4000_I_PAL_NICAM_MONO;
+		else
+			priv->video_standard = XC4000_I_PAL_NICAM;
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_PAL_DK) {
+		params->std = V4L2_STD_PAL_DK;
+		if (audio_std & XC4000_AUDIO_STD_MONO) {
+			priv->video_standard = XC4000_DK_PAL_MONO;
+		} else if (audio_std & XC4000_AUDIO_STD_A2) {
+			params->std |= V4L2_STD_A2;
+			priv->video_standard = XC4000_DK_PAL_A2;
+		} else {
+			params->std |= V4L2_STD_NICAM;
+			priv->video_standard = XC4000_DK_PAL_NICAM;
+		}
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_SECAM_DK) {
+		/* default to A2 audio standard */
+		params->std = V4L2_STD_SECAM_DK | V4L2_STD_A2;
+		if (audio_std & XC4000_AUDIO_STD_L) {
+			type = 0;
+			priv->video_standard = XC4000_DK_SECAM_NICAM;
+		} else if (audio_std & XC4000_AUDIO_STD_MONO) {
+			priv->video_standard = XC4000_DK_SECAM_A2MONO;
+		} else if (audio_std & XC4000_AUDIO_STD_K3) {
+			params->std |= V4L2_STD_SECAM_K3;
+			priv->video_standard = XC4000_DK_SECAM_A2LDK3;
+		} else {
+			priv->video_standard = XC4000_DK_SECAM_A2DK1;
+		}
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_SECAM_L) {
+		/* default to NICAM audio standard */
+		type = 0;
+		params->std = V4L2_STD_SECAM_L | V4L2_STD_NICAM;
+		priv->video_standard = XC4000_L_SECAM_NICAM;
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_SECAM_LC) {
+		/* default to NICAM audio standard */
+		type = 0;
+		params->std = V4L2_STD_SECAM_LC | V4L2_STD_NICAM;
+		priv->video_standard = XC4000_LC_SECAM_NICAM;
+		goto tune_channel;
+	}
+
+tune_channel:
+	/* FIXME: it could be air. */
+	priv->rf_mode = XC_RF_MODE_CABLE;
+
+	if (check_firmware(fe, type, params->std,
+			   xc4000_standard[priv->video_standard].int_freq) != 0)
+		goto fail;
+
+	ret = xc_set_signal_source(priv, priv->rf_mode);
+	if (ret != 0) {
+		printk(KERN_ERR
+		       "xc4000: xc_set_signal_source(%d) failed\n",
+		       priv->rf_mode);
+		goto fail;
+	} else {
+		u16	video_mode, audio_mode;
+		video_mode = xc4000_standard[priv->video_standard].video_mode;
+		audio_mode = xc4000_standard[priv->video_standard].audio_mode;
+		if (priv->video_standard < XC4000_BG_PAL_A2) {
+			if (type & NOGD)
+				video_mode &= 0xFF7F;
+		} else if (priv->video_standard < XC4000_I_PAL_NICAM) {
+			if (priv->firm_version == 0x0102)
+				video_mode &= 0xFEFF;
+			if (audio_std & XC4000_AUDIO_STD_B)
+				video_mode |= 0x0080;
+		}
+		ret = xc_set_tv_standard(priv, video_mode, audio_mode);
+		if (ret != 0) {
+			printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n");
+			goto fail;
+		}
+	}
+
+	if (xc_write_reg(priv, XREG_D_CODE, 0) == 0)
+		ret = 0;
+	if (xc_write_reg(priv, XREG_AMPLITUDE, 1) != 0)
+		ret = -EREMOTEIO;
+	if (priv->set_smoothedcvbs != 0) {
+		if (xc_write_reg(priv, XREG_SMOOTHEDCVBS, 1) != 0)
+			ret = -EREMOTEIO;
+	}
+	if (ret != 0) {
+		printk(KERN_ERR "xc4000: setting registers failed\n");
+		goto fail;
+	}
+
+	xc_tune_channel(priv, priv->freq_hz);
+
+	ret = 0;
+
+fail:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int xc4000_get_frequency(struct dvb_frontend *fe, u32 *freq)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+
+	*freq = priv->freq_hz;
+
+	if (debug) {
+		mutex_lock(&priv->lock);
+		if ((priv->cur_fw.type
+		     & (BASE | FM | DTV6 | DTV7 | DTV78 | DTV8)) == BASE) {
+			u16	snr = 0;
+			if (xc4000_readreg(priv, XREG_SNR, &snr) == 0) {
+				mutex_unlock(&priv->lock);
+				dprintk(1, "%s() freq = %u, SNR = %d\n",
+					__func__, *freq, snr);
+				return 0;
+			}
+		}
+		mutex_unlock(&priv->lock);
+	}
+
+	dprintk(1, "%s()\n", __func__);
+
+	return 0;
+}
+
+static int xc4000_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	dprintk(1, "%s()\n", __func__);
+
+	*bw = priv->bandwidth;
+	return 0;
+}
+
+static int xc4000_get_status(struct dvb_frontend *fe, u32 *status)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	u16	lock_status = 0;
+
+	mutex_lock(&priv->lock);
+
+	if (priv->cur_fw.type & BASE)
+		xc_get_lock_status(priv, &lock_status);
+
+	*status = (lock_status == 1 ?
+		   TUNER_STATUS_LOCKED | TUNER_STATUS_STEREO : 0);
+	if (priv->cur_fw.type & (DTV6 | DTV7 | DTV78 | DTV8))
+		*status &= (~TUNER_STATUS_STEREO);
+
+	mutex_unlock(&priv->lock);
+
+	dprintk(2, "%s() lock_status = %d\n", __func__, lock_status);
+
+	return 0;
+}
+
+static int xc4000_sleep(struct dvb_frontend *fe)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	int	ret = 0;
+
+	dprintk(1, "%s()\n", __func__);
+
+	mutex_lock(&priv->lock);
+
+	/* Avoid firmware reload on slow devices */
+	if ((no_poweroff == 2 ||
+	     (no_poweroff == 0 && priv->default_pm != 0)) &&
+	    (priv->cur_fw.type & BASE) != 0) {
+		/* force reset and firmware reload */
+		priv->cur_fw.type = XC_POWERED_DOWN;
+
+		if (xc_write_reg(priv, XREG_POWER_DOWN, 0) != 0) {
+			printk(KERN_ERR
+			       "xc4000: %s() unable to shutdown tuner\n",
+			       __func__);
+			ret = -EREMOTEIO;
+		}
+		msleep(20);
+	}
+
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int xc4000_init(struct dvb_frontend *fe)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	return 0;
+}
+
+static int xc4000_release(struct dvb_frontend *fe)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+
+	dprintk(1, "%s()\n", __func__);
+
+	mutex_lock(&xc4000_list_mutex);
+
+	if (priv)
+		hybrid_tuner_release_state(priv);
+
+	mutex_unlock(&xc4000_list_mutex);
+
+	fe->tuner_priv = NULL;
+
+	return 0;
+}
+
+static const struct dvb_tuner_ops xc4000_tuner_ops = {
+	.info = {
+		.name           = "Xceive XC4000",
+		.frequency_min  =    1000000,
+		.frequency_max  = 1023000000,
+		.frequency_step =      50000,
+	},
+
+	.release	   = xc4000_release,
+	.init		   = xc4000_init,
+	.sleep		   = xc4000_sleep,
+
+	.set_params	   = xc4000_set_params,
+	.set_analog_params = xc4000_set_analog_params,
+	.get_frequency	   = xc4000_get_frequency,
+	.get_bandwidth	   = xc4000_get_bandwidth,
+	.get_status	   = xc4000_get_status
+};
+
+struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe,
+				   struct i2c_adapter *i2c,
+				   struct xc4000_config *cfg)
+{
+	struct xc4000_priv *priv = NULL;
+	int	instance;
+	u16	id = 0;
+
+	dprintk(1, "%s(%d-%04x)\n", __func__,
+		i2c ? i2c_adapter_id(i2c) : -1,
+		cfg ? cfg->i2c_address : -1);
+
+	mutex_lock(&xc4000_list_mutex);
+
+	instance = hybrid_tuner_request_state(struct xc4000_priv, priv,
+					      hybrid_tuner_instance_list,
+					      i2c, cfg->i2c_address, "xc4000");
+	switch (instance) {
+	case 0:
+		goto fail;
+		break;
+	case 1:
+		/* new tuner instance */
+		priv->bandwidth = BANDWIDTH_6_MHZ;
+		/* set default configuration */
+		priv->if_khz = 4560;
+		priv->default_pm = 0;
+		priv->dvb_amplitude = 134;
+		priv->set_smoothedcvbs = 1;
+		mutex_init(&priv->lock);
+		fe->tuner_priv = priv;
+		break;
+	default:
+		/* existing tuner instance */
+		fe->tuner_priv = priv;
+		break;
+	}
+
+	if (cfg->if_khz != 0) {
+		/* copy configuration if provided by the caller */
+		priv->if_khz = cfg->if_khz;
+		priv->default_pm = cfg->default_pm;
+		priv->dvb_amplitude = cfg->dvb_amplitude;
+		priv->set_smoothedcvbs = cfg->set_smoothedcvbs;
+	}
+
+	/* Check if firmware has been loaded. It is possible that another
+	   instance of the driver has loaded the firmware.
+	 */
+
+	if (instance == 1) {
+		if (xc4000_readreg(priv, XREG_PRODUCT_ID, &id) != 0)
+			goto fail;
+	} else {
+		id = ((priv->cur_fw.type & BASE) != 0 ?
+		      priv->hwmodel : XC_PRODUCT_ID_FW_NOT_LOADED);
+	}
+
+	switch (id) {
+	case XC_PRODUCT_ID_XC4000:
+	case XC_PRODUCT_ID_XC4100:
+		printk(KERN_INFO
+			"xc4000: Successfully identified at address 0x%02x\n",
+			cfg->i2c_address);
+		printk(KERN_INFO
+			"xc4000: Firmware has been loaded previously\n");
+		break;
+	case XC_PRODUCT_ID_FW_NOT_LOADED:
+		printk(KERN_INFO
+			"xc4000: Successfully identified at address 0x%02x\n",
+			cfg->i2c_address);
+		printk(KERN_INFO
+			"xc4000: Firmware has not been loaded previously\n");
+		break;
+	default:
+		printk(KERN_ERR
+			"xc4000: Device not found at addr 0x%02x (0x%x)\n",
+			cfg->i2c_address, id);
+		goto fail;
+	}
+
+	mutex_unlock(&xc4000_list_mutex);
+
+	memcpy(&fe->ops.tuner_ops, &xc4000_tuner_ops,
+		sizeof(struct dvb_tuner_ops));
+
+	if (instance == 1) {
+		int	ret;
+		mutex_lock(&priv->lock);
+		ret = xc4000_fwupload(fe);
+		mutex_unlock(&priv->lock);
+		if (ret != 0)
+			goto fail2;
+	}
+
+	return fe;
+fail:
+	mutex_unlock(&xc4000_list_mutex);
+fail2:
+	xc4000_release(fe);
+	return NULL;
+}
+EXPORT_SYMBOL(xc4000_attach);
+
+MODULE_AUTHOR("Steven Toth, Davide Ferri");
+MODULE_DESCRIPTION("Xceive xc4000 silicon tuner driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/xc4000.h b/drivers/media/common/tuners/xc4000.h
new file mode 100644
index 0000000..e6a44d1
--- /dev/null
+++ b/drivers/media/common/tuners/xc4000.h
@@ -0,0 +1,67 @@
+/*
+ *  Driver for Xceive XC4000 "QAM/8VSB single chip tuner"
+ *
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __XC4000_H__
+#define __XC4000_H__
+
+#include <linux/firmware.h>
+
+struct dvb_frontend;
+struct i2c_adapter;
+
+struct xc4000_config {
+	u8	i2c_address;
+	/* if non-zero, power management is enabled by default */
+	u8	default_pm;
+	/* value to be written to XREG_AMPLITUDE in DVB-T mode (0: no write) */
+	u8	dvb_amplitude;
+	/* if non-zero, register 0x0E is set to filter analog TV video output */
+	u8	set_smoothedcvbs;
+	/* IF for DVB-T */
+	u32	if_khz;
+};
+
+/* xc4000 callback command */
+#define XC4000_TUNER_RESET		0
+
+/* For each bridge framework, when it attaches either analog or digital,
+ * it has to store a reference back to its _core equivalent structure,
+ * so that it can service the hardware by steering gpio's etc.
+ * Each bridge implementation is different so cast devptr accordingly.
+ * The xc4000 driver cares not for this value, other than ensuring
+ * it's passed back to a bridge during tuner_callback().
+ */
+
+#if defined(CONFIG_MEDIA_TUNER_XC4000) || (defined(CONFIG_MEDIA_TUNER_XC4000_MODULE) && defined(MODULE))
+extern struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe,
+					  struct i2c_adapter *i2c,
+					  struct xc4000_config *cfg);
+#else
+static inline struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe,
+						 struct i2c_adapter *i2c,
+						 struct xc4000_config *cfg)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index ee214c3..f6e40b3 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -80,6 +80,10 @@ comment "Supported nGene Adapters"
 	depends on DVB_CORE && PCI && I2C
 	source "drivers/media/dvb/ngene/Kconfig"
 
+comment "Supported ddbridge ('Octopus') Adapters"
+	depends on DVB_CORE && PCI && I2C
+	source "drivers/media/dvb/ddbridge/Kconfig"
+
 comment "Supported DVB Frontends"
 	depends on DVB_CORE
 source "drivers/media/dvb/frontends/Kconfig"
diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile
index a1a0875..b2cefe6 100644
--- a/drivers/media/dvb/Makefile
+++ b/drivers/media/dvb/Makefile
@@ -15,6 +15,7 @@ obj-y        := dvb-core/	\
 		dm1105/		\
 		pt1/		\
 		mantis/		\
-		ngene/
+		ngene/		\
+		ddbridge/
 
 obj-$(CONFIG_DVB_FIREDTV)	+= firewire/
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 1e1106d..521d691 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -892,7 +892,7 @@ static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
 	if (!(bttv_pci_dev = bttv_get_pcidev(card->bttv_nr))) {
 		printk("dvb_bt8xx: no pci device for card %d\n", card->bttv_nr);
 		kfree(card);
-		return -EFAULT;
+		return -ENODEV;
 	}
 
 	if (!(card->bt = dvb_bt8xx_878_match(card->bttv_nr, bttv_pci_dev))) {
@@ -902,7 +902,7 @@ static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
 		       "installed, try removing it.\n");
 
 		kfree(card);
-		return -EFAULT;
+		return -ENODEV;
 	}
 
 	mutex_init(&card->bt->gpio_lock);
diff --git a/drivers/media/dvb/ddbridge/Kconfig b/drivers/media/dvb/ddbridge/Kconfig
new file mode 100644
index 0000000..d099e1a
--- /dev/null
+++ b/drivers/media/dvb/ddbridge/Kconfig
@@ -0,0 +1,18 @@
+config DVB_DDBRIDGE
+	tristate "Digital Devices bridge support"
+	depends on DVB_CORE && PCI && I2C
+	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+	select DVB_STV6110x if !DVB_FE_CUSTOMISE
+	select DVB_STV090x if !DVB_FE_CUSTOMISE
+	select DVB_DRXK if !DVB_FE_CUSTOMISE
+	select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
+	---help---
+	  Support for cards with the Digital Devices PCI express bridge:
+	  - Octopus PCIe Bridge
+	  - Octopus mini PCIe Bridge
+	  - Octopus LE
+	  - DuoFlex S2 Octopus
+	  - DuoFlex CT Octopus
+	  - cineS2(v6)
+
+	  Say Y if you own such a card and want to use it.
diff --git a/drivers/media/dvb/ddbridge/Makefile b/drivers/media/dvb/ddbridge/Makefile
new file mode 100644
index 0000000..de4fe19
--- /dev/null
+++ b/drivers/media/dvb/ddbridge/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the ddbridge device driver
+#
+
+ddbridge-objs := ddbridge-core.o
+
+obj-$(CONFIG_DVB_DDBRIDGE) += ddbridge.o
+
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/
+EXTRA_CFLAGS += -Idrivers/media/dvb/frontends/
+EXTRA_CFLAGS += -Idrivers/media/common/tuners/
+
+# For the staging CI driver cxd2099
+EXTRA_CFLAGS += -Idrivers/staging/cxd2099/
diff --git a/drivers/media/dvb/ddbridge/ddbridge-core.c b/drivers/media/dvb/ddbridge/ddbridge-core.c
new file mode 100644
index 0000000..573d540
--- /dev/null
+++ b/drivers/media/dvb/ddbridge/ddbridge-core.c
@@ -0,0 +1,1719 @@
+/*
+ * ddbridge.c: Digital Devices PCIe bridge driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/i2c.h>
+#include <linux/swab.h>
+#include <linux/vmalloc.h>
+#include "ddbridge.h"
+
+#include "ddbridge-regs.h"
+
+#include "tda18271c2dd.h"
+#include "stv6110x.h"
+#include "stv090x.h"
+#include "lnbh24.h"
+#include "drxk.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/* MSI had problems with lost interrupts, fixed but needs testing */
+#undef CONFIG_PCI_MSI
+
+/******************************************************************************/
+
+static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val)
+{
+	struct i2c_msg msgs[1] = {{.addr = adr,  .flags = I2C_M_RD,
+				   .buf  = val,  .len   = 1 } };
+	return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
+}
+
+static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr, u8 reg, u8 *val)
+{
+	struct i2c_msg msgs[2] = {{.addr = adr,  .flags = 0,
+				   .buf  = &reg, .len   = 1 },
+				  {.addr = adr,  .flags = I2C_M_RD,
+				   .buf  = val,  .len   = 1 } };
+	return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
+}
+
+static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr,
+			  u16 reg, u8 *val)
+{
+	u8 msg[2] = {reg>>8, reg&0xff};
+	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
+				   .buf  = msg, .len   = 2},
+				  {.addr = adr, .flags = I2C_M_RD,
+				   .buf  = val, .len   = 1} };
+	return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
+}
+
+static int ddb_i2c_cmd(struct ddb_i2c *i2c, u32 adr, u32 cmd)
+{
+	struct ddb *dev = i2c->dev;
+	int stat;
+	u32 val;
+
+	i2c->done = 0;
+	ddbwritel((adr << 9) | cmd, i2c->regs + I2C_COMMAND);
+	stat = wait_event_timeout(i2c->wq, i2c->done == 1, HZ);
+	if (stat <= 0) {
+		printk(KERN_ERR "I2C timeout\n");
+		{ /* MSI debugging*/
+			u32 istat = ddbreadl(INTERRUPT_STATUS);
+			printk(KERN_ERR "IRS %08x\n", istat);
+			ddbwritel(istat, INTERRUPT_ACK);
+		}
+		return -EIO;
+	}
+	val = ddbreadl(i2c->regs+I2C_COMMAND);
+	if (val & 0x70000)
+		return -EIO;
+	return 0;
+}
+
+static int ddb_i2c_master_xfer(struct i2c_adapter *adapter,
+			       struct i2c_msg msg[], int num)
+{
+	struct ddb_i2c *i2c = (struct ddb_i2c *)i2c_get_adapdata(adapter);
+	struct ddb *dev = i2c->dev;
+	u8 addr = 0;
+
+	if (num)
+		addr = msg[0].addr;
+
+	if (num == 2 && msg[1].flags & I2C_M_RD &&
+	    !(msg[0].flags & I2C_M_RD)) {
+		memcpy_toio(dev->regs + I2C_TASKMEM_BASE + i2c->wbuf,
+			    msg[0].buf, msg[0].len);
+		ddbwritel(msg[0].len|(msg[1].len << 16),
+			  i2c->regs+I2C_TASKLENGTH);
+		if (!ddb_i2c_cmd(i2c, addr, 1)) {
+			memcpy_fromio(msg[1].buf,
+				      dev->regs + I2C_TASKMEM_BASE + i2c->rbuf,
+				      msg[1].len);
+			return num;
+		}
+	}
+
+	if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
+		ddbcpyto(I2C_TASKMEM_BASE + i2c->wbuf, msg[0].buf, msg[0].len);
+		ddbwritel(msg[0].len, i2c->regs + I2C_TASKLENGTH);
+		if (!ddb_i2c_cmd(i2c, addr, 2))
+			return num;
+	}
+	if (num == 1 && (msg[0].flags & I2C_M_RD)) {
+		ddbwritel(msg[0].len << 16, i2c->regs + I2C_TASKLENGTH);
+		if (!ddb_i2c_cmd(i2c, addr, 3)) {
+			ddbcpyfrom(msg[0].buf,
+				   I2C_TASKMEM_BASE + i2c->rbuf, msg[0].len);
+			return num;
+		}
+	}
+	return -EIO;
+}
+
+
+static u32 ddb_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL;
+}
+
+struct i2c_algorithm ddb_i2c_algo = {
+	.master_xfer   = ddb_i2c_master_xfer,
+	.functionality = ddb_i2c_functionality,
+};
+
+static void ddb_i2c_release(struct ddb *dev)
+{
+	int i;
+	struct ddb_i2c *i2c;
+	struct i2c_adapter *adap;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		i2c = &dev->i2c[i];
+		adap = &i2c->adap;
+		i2c_del_adapter(adap);
+	}
+}
+
+static int ddb_i2c_init(struct ddb *dev)
+{
+	int i, j, stat = 0;
+	struct ddb_i2c *i2c;
+	struct i2c_adapter *adap;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		i2c = &dev->i2c[i];
+		i2c->dev = dev;
+		i2c->nr = i;
+		i2c->wbuf = i * (I2C_TASKMEM_SIZE / 4);
+		i2c->rbuf = i2c->wbuf + (I2C_TASKMEM_SIZE / 8);
+		i2c->regs = 0x80 + i * 0x20;
+		ddbwritel(I2C_SPEED_100, i2c->regs + I2C_TIMING);
+		ddbwritel((i2c->rbuf << 16) | i2c->wbuf,
+			  i2c->regs + I2C_TASKADDRESS);
+		init_waitqueue_head(&i2c->wq);
+
+		adap = &i2c->adap;
+		i2c_set_adapdata(adap, i2c);
+#ifdef I2C_ADAP_CLASS_TV_DIGITAL
+		adap->class = I2C_ADAP_CLASS_TV_DIGITAL|I2C_CLASS_TV_ANALOG;
+#else
+#ifdef I2C_CLASS_TV_ANALOG
+		adap->class = I2C_CLASS_TV_ANALOG;
+#endif
+#endif
+		strcpy(adap->name, "ddbridge");
+		adap->algo = &ddb_i2c_algo;
+		adap->algo_data = (void *)i2c;
+		adap->dev.parent = &dev->pdev->dev;
+		stat = i2c_add_adapter(adap);
+		if (stat)
+			break;
+	}
+	if (stat)
+		for (j = 0; j < i; j++) {
+			i2c = &dev->i2c[j];
+			adap = &i2c->adap;
+			i2c_del_adapter(adap);
+		}
+	return stat;
+}
+
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+#if 0
+static void set_table(struct ddb *dev, u32 off,
+		      dma_addr_t *pbuf, u32 num)
+{
+	u32 i, base;
+	u64 mem;
+
+	base = DMA_BASE_ADDRESS_TABLE + off;
+	for (i = 0; i < num; i++) {
+		mem = pbuf[i];
+		ddbwritel(mem & 0xffffffff, base + i * 8);
+		ddbwritel(mem >> 32, base + i * 8 + 4);
+	}
+}
+#endif
+
+static void ddb_address_table(struct ddb *dev)
+{
+	u32 i, j, base;
+	u64 mem;
+	dma_addr_t *pbuf;
+
+	for (i = 0; i < dev->info->port_num * 2; i++) {
+		base = DMA_BASE_ADDRESS_TABLE + i * 0x100;
+		pbuf = dev->input[i].pbuf;
+		for (j = 0; j < dev->input[i].dma_buf_num; j++) {
+			mem = pbuf[j];
+			ddbwritel(mem & 0xffffffff, base + j * 8);
+			ddbwritel(mem >> 32, base + j * 8 + 4);
+		}
+	}
+	for (i = 0; i < dev->info->port_num; i++) {
+		base = DMA_BASE_ADDRESS_TABLE + 0x800 + i * 0x100;
+		pbuf = dev->output[i].pbuf;
+		for (j = 0; j < dev->output[i].dma_buf_num; j++) {
+			mem = pbuf[j];
+			ddbwritel(mem & 0xffffffff, base + j * 8);
+			ddbwritel(mem >> 32, base + j * 8 + 4);
+		}
+	}
+}
+
+static void io_free(struct pci_dev *pdev, u8 **vbuf,
+		    dma_addr_t *pbuf, u32 size, int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++) {
+		if (vbuf[i]) {
+			pci_free_consistent(pdev, size, vbuf[i], pbuf[i]);
+			vbuf[i] = 0;
+		}
+	}
+}
+
+static int io_alloc(struct pci_dev *pdev, u8 **vbuf,
+		    dma_addr_t *pbuf, u32 size, int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++) {
+		vbuf[i] = pci_alloc_consistent(pdev, size, &pbuf[i]);
+		if (!vbuf[i])
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+static int ddb_buffers_alloc(struct ddb *dev)
+{
+	int i;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		switch (port->class) {
+		case DDB_PORT_TUNER:
+			if (io_alloc(dev->pdev, port->input[0]->vbuf,
+				     port->input[0]->pbuf,
+				     port->input[0]->dma_buf_size,
+				     port->input[0]->dma_buf_num) < 0)
+				return -1;
+			if (io_alloc(dev->pdev, port->input[1]->vbuf,
+				     port->input[1]->pbuf,
+				     port->input[1]->dma_buf_size,
+				     port->input[1]->dma_buf_num) < 0)
+				return -1;
+			break;
+		case DDB_PORT_CI:
+			if (io_alloc(dev->pdev, port->input[0]->vbuf,
+				     port->input[0]->pbuf,
+				     port->input[0]->dma_buf_size,
+				     port->input[0]->dma_buf_num) < 0)
+				return -1;
+			if (io_alloc(dev->pdev, port->output->vbuf,
+				     port->output->pbuf,
+				     port->output->dma_buf_size,
+				     port->output->dma_buf_num) < 0)
+				return -1;
+			break;
+		default:
+			break;
+		}
+	}
+	ddb_address_table(dev);
+	return 0;
+}
+
+static void ddb_buffers_free(struct ddb *dev)
+{
+	int i;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		io_free(dev->pdev, port->input[0]->vbuf,
+			port->input[0]->pbuf,
+			port->input[0]->dma_buf_size,
+			port->input[0]->dma_buf_num);
+		io_free(dev->pdev, port->input[1]->vbuf,
+			port->input[1]->pbuf,
+			port->input[1]->dma_buf_size,
+			port->input[1]->dma_buf_num);
+		io_free(dev->pdev, port->output->vbuf,
+			port->output->pbuf,
+			port->output->dma_buf_size,
+			port->output->dma_buf_num);
+	}
+}
+
+static void ddb_input_start(struct ddb_input *input)
+{
+	struct ddb *dev = input->port->dev;
+
+	spin_lock_irq(&input->lock);
+	input->cbuf = 0;
+	input->coff = 0;
+
+	/* reset */
+	ddbwritel(0, TS_INPUT_CONTROL(input->nr));
+	ddbwritel(2, TS_INPUT_CONTROL(input->nr));
+	ddbwritel(0, TS_INPUT_CONTROL(input->nr));
+
+	ddbwritel((1 << 16) |
+		  (input->dma_buf_num << 11) |
+		  (input->dma_buf_size >> 7),
+		  DMA_BUFFER_SIZE(input->nr));
+	ddbwritel(0, DMA_BUFFER_ACK(input->nr));
+
+	ddbwritel(1, DMA_BASE_WRITE);
+	ddbwritel(3, DMA_BUFFER_CONTROL(input->nr));
+	ddbwritel(9, TS_INPUT_CONTROL(input->nr));
+	input->running = 1;
+	spin_unlock_irq(&input->lock);
+}
+
+static void ddb_input_stop(struct ddb_input *input)
+{
+	struct ddb *dev = input->port->dev;
+
+	spin_lock_irq(&input->lock);
+	ddbwritel(0, TS_INPUT_CONTROL(input->nr));
+	ddbwritel(0, DMA_BUFFER_CONTROL(input->nr));
+	input->running = 0;
+	spin_unlock_irq(&input->lock);
+}
+
+static void ddb_output_start(struct ddb_output *output)
+{
+	struct ddb *dev = output->port->dev;
+
+	spin_lock_irq(&output->lock);
+	output->cbuf = 0;
+	output->coff = 0;
+	ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
+	ddbwritel(2, TS_OUTPUT_CONTROL(output->nr));
+	ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
+	ddbwritel(0x3c, TS_OUTPUT_CONTROL(output->nr));
+	ddbwritel((1 << 16) |
+		  (output->dma_buf_num << 11) |
+		  (output->dma_buf_size >> 7),
+		  DMA_BUFFER_SIZE(output->nr + 8));
+	ddbwritel(0, DMA_BUFFER_ACK(output->nr + 8));
+
+	ddbwritel(1, DMA_BASE_READ);
+	ddbwritel(3, DMA_BUFFER_CONTROL(output->nr + 8));
+	/* ddbwritel(0xbd, TS_OUTPUT_CONTROL(output->nr)); */
+	ddbwritel(0x1d, TS_OUTPUT_CONTROL(output->nr));
+	output->running = 1;
+	spin_unlock_irq(&output->lock);
+}
+
+static void ddb_output_stop(struct ddb_output *output)
+{
+	struct ddb *dev = output->port->dev;
+
+	spin_lock_irq(&output->lock);
+	ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
+	ddbwritel(0, DMA_BUFFER_CONTROL(output->nr + 8));
+	output->running = 0;
+	spin_unlock_irq(&output->lock);
+}
+
+static u32 ddb_output_free(struct ddb_output *output)
+{
+	u32 idx, off, stat = output->stat;
+	s32 diff;
+
+	idx = (stat >> 11) & 0x1f;
+	off = (stat & 0x7ff) << 7;
+
+	if (output->cbuf != idx) {
+		if ((((output->cbuf + 1) % output->dma_buf_num) == idx) &&
+		    (output->dma_buf_size - output->coff <= 188))
+			return 0;
+		return 188;
+	}
+	diff = off - output->coff;
+	if (diff <= 0 || diff > 188)
+		return 188;
+	return 0;
+}
+
+static ssize_t ddb_output_write(struct ddb_output *output,
+				const u8 *buf, size_t count)
+{
+	struct ddb *dev = output->port->dev;
+	u32 idx, off, stat = output->stat;
+	u32 left = count, len;
+
+	idx = (stat >> 11) & 0x1f;
+	off = (stat & 0x7ff) << 7;
+
+	while (left) {
+		len = output->dma_buf_size - output->coff;
+		if ((((output->cbuf + 1) % output->dma_buf_num) == idx) &&
+		    (off == 0)) {
+			if (len <= 188)
+				break;
+			len -= 188;
+		}
+		if (output->cbuf == idx) {
+			if (off > output->coff) {
+#if 1
+				len = off - output->coff;
+				len -= (len % 188);
+				if (len <= 188)
+
+#endif
+					break;
+				len -= 188;
+			}
+		}
+		if (len > left)
+			len = left;
+		if (copy_from_user(output->vbuf[output->cbuf] + output->coff,
+				   buf, len))
+			return -EIO;
+		left -= len;
+		buf += len;
+		output->coff += len;
+		if (output->coff == output->dma_buf_size) {
+			output->coff = 0;
+			output->cbuf = ((output->cbuf + 1) % output->dma_buf_num);
+		}
+		ddbwritel((output->cbuf << 11) | (output->coff >> 7),
+			  DMA_BUFFER_ACK(output->nr + 8));
+	}
+	return count - left;
+}
+
+static u32 ddb_input_avail(struct ddb_input *input)
+{
+	struct ddb *dev = input->port->dev;
+	u32 idx, off, stat = input->stat;
+	u32 ctrl = ddbreadl(DMA_BUFFER_CONTROL(input->nr));
+
+	idx = (stat >> 11) & 0x1f;
+	off = (stat & 0x7ff) << 7;
+
+	if (ctrl & 4) {
+		printk(KERN_ERR "IA %d %d %08x\n", idx, off, ctrl);
+		ddbwritel(input->stat, DMA_BUFFER_ACK(input->nr));
+		return 0;
+	}
+	if (input->cbuf != idx)
+		return 188;
+	return 0;
+}
+
+static size_t ddb_input_read(struct ddb_input *input, u8 *buf, size_t count)
+{
+	struct ddb *dev = input->port->dev;
+	u32 left = count;
+	u32 idx, off, free, stat = input->stat;
+	int ret;
+
+	idx = (stat >> 11) & 0x1f;
+	off = (stat & 0x7ff) << 7;
+
+	while (left) {
+		if (input->cbuf == idx)
+			return count - left;
+		free = input->dma_buf_size - input->coff;
+		if (free > left)
+			free = left;
+		ret = copy_to_user(buf, input->vbuf[input->cbuf] +
+				   input->coff, free);
+		input->coff += free;
+		if (input->coff == input->dma_buf_size) {
+			input->coff = 0;
+			input->cbuf = (input->cbuf+1) % input->dma_buf_num;
+		}
+		left -= free;
+		ddbwritel((input->cbuf << 11) | (input->coff >> 7),
+			  DMA_BUFFER_ACK(input->nr));
+	}
+	return count;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+#if 0
+static struct ddb_input *fe2input(struct ddb *dev, struct dvb_frontend *fe)
+{
+	int i;
+
+	for (i = 0; i < dev->info->port_num * 2; i++) {
+		if (dev->input[i].fe == fe)
+			return &dev->input[i];
+	}
+	return NULL;
+}
+#endif
+
+static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct ddb_input *input = fe->sec_priv;
+	struct ddb_port *port = input->port;
+	int status;
+
+	if (enable) {
+		mutex_lock(&port->i2c_gate_lock);
+		status = input->gate_ctrl(fe, 1);
+	} else {
+		status = input->gate_ctrl(fe, 0);
+		mutex_unlock(&port->i2c_gate_lock);
+	}
+	return status;
+}
+
+static int demod_attach_drxk(struct ddb_input *input)
+{
+	struct i2c_adapter *i2c = &input->port->i2c->adap;
+	struct dvb_frontend *fe;
+	struct drxk_config config;
+
+	memset(&config, 0, sizeof(config));
+	config.adr = 0x29 + (input->nr & 1);
+
+	fe = input->fe = dvb_attach(drxk_attach, &config, i2c, &input->fe2);
+	if (!input->fe) {
+		printk(KERN_ERR "No DRXK found!\n");
+		return -ENODEV;
+	}
+	fe->sec_priv = input;
+	input->gate_ctrl = fe->ops.i2c_gate_ctrl;
+	fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+	return 0;
+}
+
+static int tuner_attach_tda18271(struct ddb_input *input)
+{
+	struct i2c_adapter *i2c = &input->port->i2c->adap;
+	struct dvb_frontend *fe;
+
+	if (input->fe->ops.i2c_gate_ctrl)
+		input->fe->ops.i2c_gate_ctrl(input->fe, 1);
+	fe = dvb_attach(tda18271c2dd_attach, input->fe, i2c, 0x60);
+	if (!fe) {
+		printk(KERN_ERR "No TDA18271 found!\n");
+		return -ENODEV;
+	}
+	if (input->fe->ops.i2c_gate_ctrl)
+		input->fe->ops.i2c_gate_ctrl(input->fe, 0);
+	return 0;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+static struct stv090x_config stv0900 = {
+	.device         = STV0900,
+	.demod_mode     = STV090x_DUAL,
+	.clk_mode       = STV090x_CLK_EXT,
+
+	.xtal           = 27000000,
+	.address        = 0x69,
+
+	.ts1_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
+	.ts2_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
+
+	.repeater_level = STV090x_RPTLEVEL_16,
+
+	.adc1_range	= STV090x_ADC_1Vpp,
+	.adc2_range	= STV090x_ADC_1Vpp,
+
+	.diseqc_envelope_mode = true,
+};
+
+static struct stv090x_config stv0900_aa = {
+	.device         = STV0900,
+	.demod_mode     = STV090x_DUAL,
+	.clk_mode       = STV090x_CLK_EXT,
+
+	.xtal           = 27000000,
+	.address        = 0x68,
+
+	.ts1_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
+	.ts2_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
+
+	.repeater_level = STV090x_RPTLEVEL_16,
+
+	.adc1_range	= STV090x_ADC_1Vpp,
+	.adc2_range	= STV090x_ADC_1Vpp,
+
+	.diseqc_envelope_mode = true,
+};
+
+static struct stv6110x_config stv6110a = {
+	.addr    = 0x60,
+	.refclk	 = 27000000,
+	.clk_div = 1,
+};
+
+static struct stv6110x_config stv6110b = {
+	.addr    = 0x63,
+	.refclk	 = 27000000,
+	.clk_div = 1,
+};
+
+static int demod_attach_stv0900(struct ddb_input *input, int type)
+{
+	struct i2c_adapter *i2c = &input->port->i2c->adap;
+	struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
+
+	input->fe = dvb_attach(stv090x_attach, feconf, i2c,
+			       (input->nr & 1) ? STV090x_DEMODULATOR_1
+			       : STV090x_DEMODULATOR_0);
+	if (!input->fe) {
+		printk(KERN_ERR "No STV0900 found!\n");
+		return -ENODEV;
+	}
+	if (!dvb_attach(lnbh24_attach, input->fe, i2c, 0,
+			0, (input->nr & 1) ?
+			(0x09 - type) : (0x0b - type))) {
+		printk(KERN_ERR "No LNBH24 found!\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int tuner_attach_stv6110(struct ddb_input *input, int type)
+{
+	struct i2c_adapter *i2c = &input->port->i2c->adap;
+	struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
+	struct stv6110x_config *tunerconf = (input->nr & 1) ?
+		&stv6110b : &stv6110a;
+	struct stv6110x_devctl *ctl;
+
+	ctl = dvb_attach(stv6110x_attach, input->fe, tunerconf, i2c);
+	if (!ctl) {
+		printk(KERN_ERR "No STV6110X found!\n");
+		return -ENODEV;
+	}
+	printk(KERN_INFO "attach tuner input %d adr %02x\n",
+			 input->nr, tunerconf->addr);
+
+	feconf->tuner_init          = ctl->tuner_init;
+	feconf->tuner_sleep         = ctl->tuner_sleep;
+	feconf->tuner_set_mode      = ctl->tuner_set_mode;
+	feconf->tuner_set_frequency = ctl->tuner_set_frequency;
+	feconf->tuner_get_frequency = ctl->tuner_get_frequency;
+	feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth;
+	feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth;
+	feconf->tuner_set_bbgain    = ctl->tuner_set_bbgain;
+	feconf->tuner_get_bbgain    = ctl->tuner_get_bbgain;
+	feconf->tuner_set_refclk    = ctl->tuner_set_refclk;
+	feconf->tuner_get_status    = ctl->tuner_get_status;
+
+	return 0;
+}
+
+static int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id,
+			    int (*start_feed)(struct dvb_demux_feed *),
+			    int (*stop_feed)(struct dvb_demux_feed *),
+			    void *priv)
+{
+	dvbdemux->priv = priv;
+
+	dvbdemux->filternum = 256;
+	dvbdemux->feednum = 256;
+	dvbdemux->start_feed = start_feed;
+	dvbdemux->stop_feed = stop_feed;
+	dvbdemux->write_to_decoder = NULL;
+	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
+				      DMX_SECTION_FILTERING |
+				      DMX_MEMORY_BASED_FILTERING);
+	return dvb_dmx_init(dvbdemux);
+}
+
+static int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev,
+			       struct dvb_demux *dvbdemux,
+			       struct dmx_frontend *hw_frontend,
+			       struct dmx_frontend *mem_frontend,
+			       struct dvb_adapter *dvb_adapter)
+{
+	int ret;
+
+	dmxdev->filternum = 256;
+	dmxdev->demux = &dvbdemux->dmx;
+	dmxdev->capabilities = 0;
+	ret = dvb_dmxdev_init(dmxdev, dvb_adapter);
+	if (ret < 0)
+		return ret;
+
+	hw_frontend->source = DMX_FRONTEND_0;
+	dvbdemux->dmx.add_frontend(&dvbdemux->dmx, hw_frontend);
+	mem_frontend->source = DMX_MEMORY_FE;
+	dvbdemux->dmx.add_frontend(&dvbdemux->dmx, mem_frontend);
+	return dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, hw_frontend);
+}
+
+static int start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+	struct ddb_input *input = dvbdmx->priv;
+
+	if (!input->users)
+		ddb_input_start(input);
+
+	return ++input->users;
+}
+
+static int stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+	struct ddb_input *input = dvbdmx->priv;
+
+	if (--input->users)
+		return input->users;
+
+	ddb_input_stop(input);
+	return 0;
+}
+
+
+static void dvb_input_detach(struct ddb_input *input)
+{
+	struct dvb_adapter *adap = &input->adap;
+	struct dvb_demux *dvbdemux = &input->demux;
+
+	switch (input->attached) {
+	case 5:
+		if (input->fe2)
+			dvb_unregister_frontend(input->fe2);
+		if (input->fe) {
+			dvb_unregister_frontend(input->fe);
+			dvb_frontend_detach(input->fe);
+			input->fe = NULL;
+		}
+	case 4:
+		dvb_net_release(&input->dvbnet);
+
+	case 3:
+		dvbdemux->dmx.close(&dvbdemux->dmx);
+		dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
+					      &input->hw_frontend);
+		dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
+					      &input->mem_frontend);
+		dvb_dmxdev_release(&input->dmxdev);
+
+	case 2:
+		dvb_dmx_release(&input->demux);
+
+	case 1:
+		dvb_unregister_adapter(adap);
+	}
+	input->attached = 0;
+}
+
+static int dvb_input_attach(struct ddb_input *input)
+{
+	int ret;
+	struct ddb_port *port = input->port;
+	struct dvb_adapter *adap = &input->adap;
+	struct dvb_demux *dvbdemux = &input->demux;
+
+	ret = dvb_register_adapter(adap, "DDBridge", THIS_MODULE,
+				   &input->port->dev->pdev->dev,
+				   adapter_nr);
+	if (ret < 0) {
+		printk(KERN_ERR "ddbridge: Could not register adapter."
+		       "Check if you enabled enough adapters in dvb-core!\n");
+		return ret;
+	}
+	input->attached = 1;
+
+	ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux",
+				      start_feed,
+				      stop_feed, input);
+	if (ret < 0)
+		return ret;
+	input->attached = 2;
+
+	ret = my_dvb_dmxdev_ts_card_init(&input->dmxdev, &input->demux,
+					 &input->hw_frontend,
+					 &input->mem_frontend, adap);
+	if (ret < 0)
+		return ret;
+	input->attached = 3;
+
+	ret = dvb_net_init(adap, &input->dvbnet, input->dmxdev.demux);
+	if (ret < 0)
+		return ret;
+	input->attached = 4;
+
+	input->fe = 0;
+	switch (port->type) {
+	case DDB_TUNER_DVBS_ST:
+		if (demod_attach_stv0900(input, 0) < 0)
+			return -ENODEV;
+		if (tuner_attach_stv6110(input, 0) < 0)
+			return -ENODEV;
+		if (input->fe) {
+			if (dvb_register_frontend(adap, input->fe) < 0)
+				return -ENODEV;
+		}
+		break;
+	case DDB_TUNER_DVBS_ST_AA:
+		if (demod_attach_stv0900(input, 1) < 0)
+			return -ENODEV;
+		if (tuner_attach_stv6110(input, 1) < 0)
+			return -ENODEV;
+		if (input->fe) {
+			if (dvb_register_frontend(adap, input->fe) < 0)
+				return -ENODEV;
+		}
+		break;
+	case DDB_TUNER_DVBCT_TR:
+		if (demod_attach_drxk(input) < 0)
+			return -ENODEV;
+		if (tuner_attach_tda18271(input) < 0)
+			return -ENODEV;
+		if (input->fe) {
+			if (dvb_register_frontend(adap, input->fe) < 0)
+				return -ENODEV;
+		}
+		if (input->fe2) {
+			if (dvb_register_frontend(adap, input->fe2) < 0)
+				return -ENODEV;
+			input->fe2->tuner_priv = input->fe->tuner_priv;
+			memcpy(&input->fe2->ops.tuner_ops,
+			       &input->fe->ops.tuner_ops,
+			       sizeof(struct dvb_tuner_ops));
+		}
+		break;
+	}
+	input->attached = 5;
+	return 0;
+}
+
+/****************************************************************************/
+/****************************************************************************/
+
+static ssize_t ts_write(struct file *file, const char *buf,
+			size_t count, loff_t *ppos)
+{
+	struct dvb_device *dvbdev = file->private_data;
+	struct ddb_output *output = dvbdev->priv;
+	size_t left = count;
+	int stat;
+
+	while (left) {
+		if (ddb_output_free(output) < 188) {
+			if (file->f_flags & O_NONBLOCK)
+				break;
+			if (wait_event_interruptible(
+				    output->wq, ddb_output_free(output) >= 188) < 0)
+				break;
+		}
+		stat = ddb_output_write(output, buf, left);
+		if (stat < 0)
+			break;
+		buf += stat;
+		left -= stat;
+	}
+	return (left == count) ? -EAGAIN : (count - left);
+}
+
+static ssize_t ts_read(struct file *file, char *buf,
+		       size_t count, loff_t *ppos)
+{
+	struct dvb_device *dvbdev = file->private_data;
+	struct ddb_output *output = dvbdev->priv;
+	struct ddb_input *input = output->port->input[0];
+	int left, read;
+
+	count -= count % 188;
+	left = count;
+	while (left) {
+		if (ddb_input_avail(input) < 188) {
+			if (file->f_flags & O_NONBLOCK)
+				break;
+			if (wait_event_interruptible(
+				    input->wq, ddb_input_avail(input) >= 188) < 0)
+				break;
+		}
+		read = ddb_input_read(input, buf, left);
+		left -= read;
+		buf += read;
+	}
+	return (left == count) ? -EAGAIN : (count - left);
+}
+
+static unsigned int ts_poll(struct file *file, poll_table *wait)
+{
+	/*
+	struct dvb_device *dvbdev = file->private_data;
+	struct ddb_output *output = dvbdev->priv;
+	struct ddb_input *input = output->port->input[0];
+	*/
+	unsigned int mask = 0;
+
+#if 0
+	if (data_avail_to_read)
+		mask |= POLLIN | POLLRDNORM;
+	if (data_avail_to_write)
+		mask |= POLLOUT | POLLWRNORM;
+
+	poll_wait(file, &read_queue, wait);
+	poll_wait(file, &write_queue, wait);
+#endif
+	return mask;
+}
+
+static const struct file_operations ci_fops = {
+	.owner   = THIS_MODULE,
+	.read    = ts_read,
+	.write   = ts_write,
+	.open    = dvb_generic_open,
+	.release = dvb_generic_release,
+	.poll    = ts_poll,
+	.mmap    = 0,
+};
+
+static struct dvb_device dvbdev_ci = {
+	.priv    = 0,
+	.readers = -1,
+	.writers = -1,
+	.users   = -1,
+	.fops    = &ci_fops,
+};
+
+/****************************************************************************/
+/****************************************************************************/
+/****************************************************************************/
+
+static void input_tasklet(unsigned long data)
+{
+	struct ddb_input *input = (struct ddb_input *) data;
+	struct ddb *dev = input->port->dev;
+
+	spin_lock(&input->lock);
+	if (!input->running) {
+		spin_unlock(&input->lock);
+		return;
+	}
+	input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr));
+
+	if (input->port->class == DDB_PORT_TUNER) {
+		if (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))
+			printk(KERN_ERR "Overflow input %d\n", input->nr);
+		while (input->cbuf != ((input->stat >> 11) & 0x1f)
+		       || (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))) {
+			dvb_dmx_swfilter_packets(&input->demux,
+						 input->vbuf[input->cbuf],
+						 input->dma_buf_size / 188);
+
+			input->cbuf = (input->cbuf + 1) % input->dma_buf_num;
+			ddbwritel((input->cbuf << 11),
+				  DMA_BUFFER_ACK(input->nr));
+			input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr));
+		       }
+	}
+	if (input->port->class == DDB_PORT_CI)
+		wake_up(&input->wq);
+	spin_unlock(&input->lock);
+}
+
+static void output_tasklet(unsigned long data)
+{
+	struct ddb_output *output = (struct ddb_output *) data;
+	struct ddb *dev = output->port->dev;
+
+	spin_lock(&output->lock);
+	if (!output->running) {
+		spin_unlock(&output->lock);
+		return;
+	}
+	output->stat = ddbreadl(DMA_BUFFER_CURRENT(output->nr + 8));
+	wake_up(&output->wq);
+	spin_unlock(&output->lock);
+}
+
+
+struct cxd2099_cfg cxd_cfg = {
+	.bitrate =  62000,
+	.adr     =  0x40,
+	.polarity = 1,
+	.clock_mode = 1,
+};
+
+static int ddb_ci_attach(struct ddb_port *port)
+{
+	int ret;
+
+	ret = dvb_register_adapter(&port->output->adap,
+				   "DDBridge",
+				   THIS_MODULE,
+				   &port->dev->pdev->dev,
+				   adapter_nr);
+	if (ret < 0)
+		return ret;
+	port->en = cxd2099_attach(&cxd_cfg, port, &port->i2c->adap);
+	if (!port->en) {
+		dvb_unregister_adapter(&port->output->adap);
+		return -ENODEV;
+	}
+	ddb_input_start(port->input[0]);
+	ddb_output_start(port->output);
+	dvb_ca_en50221_init(&port->output->adap,
+			    port->en, 0, 1);
+	ret = dvb_register_device(&port->output->adap, &port->output->dev,
+				  &dvbdev_ci, (void *) port->output,
+				  DVB_DEVICE_SEC);
+	return ret;
+}
+
+static int ddb_port_attach(struct ddb_port *port)
+{
+	int ret = 0;
+
+	switch (port->class) {
+	case DDB_PORT_TUNER:
+		ret = dvb_input_attach(port->input[0]);
+		if (ret < 0)
+			break;
+		ret = dvb_input_attach(port->input[1]);
+		break;
+	case DDB_PORT_CI:
+		ret = ddb_ci_attach(port);
+		break;
+	default:
+		break;
+	}
+	if (ret < 0)
+		printk(KERN_ERR "port_attach on port %d failed\n", port->nr);
+	return ret;
+}
+
+static int ddb_ports_attach(struct ddb *dev)
+{
+	int i, ret = 0;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		ret = ddb_port_attach(port);
+		if (ret < 0)
+			break;
+	}
+	return ret;
+}
+
+static void ddb_ports_detach(struct ddb *dev)
+{
+	int i;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		switch (port->class) {
+		case DDB_PORT_TUNER:
+			dvb_input_detach(port->input[0]);
+			dvb_input_detach(port->input[1]);
+			break;
+		case DDB_PORT_CI:
+			if (port->output->dev)
+				dvb_unregister_device(port->output->dev);
+			if (port->en) {
+				ddb_input_stop(port->input[0]);
+				ddb_output_stop(port->output);
+				dvb_ca_en50221_release(port->en);
+				kfree(port->en);
+				port->en = 0;
+				dvb_unregister_adapter(&port->output->adap);
+			}
+			break;
+		}
+	}
+}
+
+/****************************************************************************/
+/****************************************************************************/
+
+static int port_has_ci(struct ddb_port *port)
+{
+	u8 val;
+	return i2c_read_reg(&port->i2c->adap, 0x40, 0, &val) ? 0 : 1;
+}
+
+static int port_has_stv0900(struct ddb_port *port)
+{
+	u8 val;
+	if (i2c_read_reg16(&port->i2c->adap, 0x69, 0xf100, &val) < 0)
+		return 0;
+	return 1;
+}
+
+static int port_has_stv0900_aa(struct ddb_port *port)
+{
+	u8 val;
+	if (i2c_read_reg16(&port->i2c->adap, 0x68, 0xf100, &val) < 0)
+		return 0;
+	return 1;
+}
+
+static int port_has_drxks(struct ddb_port *port)
+{
+	u8 val;
+	if (i2c_read(&port->i2c->adap, 0x29, &val) < 0)
+		return 0;
+	if (i2c_read(&port->i2c->adap, 0x2a, &val) < 0)
+		return 0;
+	return 1;
+}
+
+static void ddb_port_probe(struct ddb_port *port)
+{
+	struct ddb *dev = port->dev;
+	char *modname = "NO MODULE";
+
+	port->class = DDB_PORT_NONE;
+
+	if (port_has_ci(port)) {
+		modname = "CI";
+		port->class = DDB_PORT_CI;
+		ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
+	} else if (port_has_stv0900(port)) {
+		modname = "DUAL DVB-S2";
+		port->class = DDB_PORT_TUNER;
+		port->type = DDB_TUNER_DVBS_ST;
+		ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING);
+	} else if (port_has_stv0900_aa(port)) {
+		modname = "DUAL DVB-S2";
+		port->class = DDB_PORT_TUNER;
+		port->type = DDB_TUNER_DVBS_ST_AA;
+		ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING);
+	} else if (port_has_drxks(port)) {
+		modname = "DUAL DVB-C/T";
+		port->class = DDB_PORT_TUNER;
+		port->type = DDB_TUNER_DVBCT_TR;
+		ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
+	}
+	printk(KERN_INFO "Port %d (TAB %d): %s\n",
+			 port->nr, port->nr+1, modname);
+}
+
+static void ddb_input_init(struct ddb_port *port, int nr)
+{
+	struct ddb *dev = port->dev;
+	struct ddb_input *input = &dev->input[nr];
+
+	input->nr = nr;
+	input->port = port;
+	input->dma_buf_num = INPUT_DMA_BUFS;
+	input->dma_buf_size = INPUT_DMA_SIZE;
+	ddbwritel(0, TS_INPUT_CONTROL(nr));
+	ddbwritel(2, TS_INPUT_CONTROL(nr));
+	ddbwritel(0, TS_INPUT_CONTROL(nr));
+	ddbwritel(0, DMA_BUFFER_ACK(nr));
+	tasklet_init(&input->tasklet, input_tasklet, (unsigned long) input);
+	spin_lock_init(&input->lock);
+	init_waitqueue_head(&input->wq);
+}
+
+static void ddb_output_init(struct ddb_port *port, int nr)
+{
+	struct ddb *dev = port->dev;
+	struct ddb_output *output = &dev->output[nr];
+	output->nr = nr;
+	output->port = port;
+	output->dma_buf_num = OUTPUT_DMA_BUFS;
+	output->dma_buf_size = OUTPUT_DMA_SIZE;
+
+	ddbwritel(0, TS_OUTPUT_CONTROL(nr));
+	ddbwritel(2, TS_OUTPUT_CONTROL(nr));
+	ddbwritel(0, TS_OUTPUT_CONTROL(nr));
+	tasklet_init(&output->tasklet, output_tasklet, (unsigned long) output);
+	init_waitqueue_head(&output->wq);
+}
+
+static void ddb_ports_init(struct ddb *dev)
+{
+	int i;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		port->dev = dev;
+		port->nr = i;
+		port->i2c = &dev->i2c[i];
+		port->input[0] = &dev->input[2 * i];
+		port->input[1] = &dev->input[2 * i + 1];
+		port->output = &dev->output[i];
+
+		mutex_init(&port->i2c_gate_lock);
+		ddb_port_probe(port);
+		ddb_input_init(port, 2 * i);
+		ddb_input_init(port, 2 * i + 1);
+		ddb_output_init(port, i);
+	}
+}
+
+static void ddb_ports_release(struct ddb *dev)
+{
+	int i;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		port->dev = dev;
+		tasklet_kill(&port->input[0]->tasklet);
+		tasklet_kill(&port->input[1]->tasklet);
+		tasklet_kill(&port->output->tasklet);
+	}
+}
+
+/****************************************************************************/
+/****************************************************************************/
+/****************************************************************************/
+
+static void irq_handle_i2c(struct ddb *dev, int n)
+{
+	struct ddb_i2c *i2c = &dev->i2c[n];
+
+	i2c->done = 1;
+	wake_up(&i2c->wq);
+}
+
+static irqreturn_t irq_handler(int irq, void *dev_id)
+{
+	struct ddb *dev = (struct ddb *) dev_id;
+	u32 s = ddbreadl(INTERRUPT_STATUS);
+
+	if (!s)
+		return IRQ_NONE;
+
+	do {
+		ddbwritel(s, INTERRUPT_ACK);
+
+		if (s & 0x00000001)
+			irq_handle_i2c(dev, 0);
+		if (s & 0x00000002)
+			irq_handle_i2c(dev, 1);
+		if (s & 0x00000004)
+			irq_handle_i2c(dev, 2);
+		if (s & 0x00000008)
+			irq_handle_i2c(dev, 3);
+
+		if (s & 0x00000100)
+			tasklet_schedule(&dev->input[0].tasklet);
+		if (s & 0x00000200)
+			tasklet_schedule(&dev->input[1].tasklet);
+		if (s & 0x00000400)
+			tasklet_schedule(&dev->input[2].tasklet);
+		if (s & 0x00000800)
+			tasklet_schedule(&dev->input[3].tasklet);
+		if (s & 0x00001000)
+			tasklet_schedule(&dev->input[4].tasklet);
+		if (s & 0x00002000)
+			tasklet_schedule(&dev->input[5].tasklet);
+		if (s & 0x00004000)
+			tasklet_schedule(&dev->input[6].tasklet);
+		if (s & 0x00008000)
+			tasklet_schedule(&dev->input[7].tasklet);
+
+		if (s & 0x00010000)
+			tasklet_schedule(&dev->output[0].tasklet);
+		if (s & 0x00020000)
+			tasklet_schedule(&dev->output[1].tasklet);
+		if (s & 0x00040000)
+			tasklet_schedule(&dev->output[2].tasklet);
+		if (s & 0x00080000)
+			tasklet_schedule(&dev->output[3].tasklet);
+
+		/* if (s & 0x000f0000)	printk(KERN_DEBUG "%08x\n", istat); */
+	} while ((s = ddbreadl(INTERRUPT_STATUS)));
+
+	return IRQ_HANDLED;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+static int flashio(struct ddb *dev, u8 *wbuf, u32 wlen, u8 *rbuf, u32 rlen)
+{
+	u32 data, shift;
+
+	if (wlen > 4)
+		ddbwritel(1, SPI_CONTROL);
+	while (wlen > 4) {
+		/* FIXME: check for big-endian */
+		data = swab32(*(u32 *)wbuf);
+		wbuf += 4;
+		wlen -= 4;
+		ddbwritel(data, SPI_DATA);
+		while (ddbreadl(SPI_CONTROL) & 0x0004)
+			;
+	}
+
+	if (rlen)
+		ddbwritel(0x0001 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL);
+	else
+		ddbwritel(0x0003 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL);
+
+	data = 0;
+	shift = ((4 - wlen) * 8);
+	while (wlen) {
+		data <<= 8;
+		data |= *wbuf;
+		wlen--;
+		wbuf++;
+	}
+	if (shift)
+		data <<= shift;
+	ddbwritel(data, SPI_DATA);
+	while (ddbreadl(SPI_CONTROL) & 0x0004)
+		;
+
+	if (!rlen) {
+		ddbwritel(0, SPI_CONTROL);
+		return 0;
+	}
+	if (rlen > 4)
+		ddbwritel(1, SPI_CONTROL);
+
+	while (rlen > 4) {
+		ddbwritel(0xffffffff, SPI_DATA);
+		while (ddbreadl(SPI_CONTROL) & 0x0004)
+			;
+		data = ddbreadl(SPI_DATA);
+		*(u32 *) rbuf = swab32(data);
+		rbuf += 4;
+		rlen -= 4;
+	}
+	ddbwritel(0x0003 | ((rlen << (8 + 3)) & 0x1F00), SPI_CONTROL);
+	ddbwritel(0xffffffff, SPI_DATA);
+	while (ddbreadl(SPI_CONTROL) & 0x0004)
+		;
+
+	data = ddbreadl(SPI_DATA);
+	ddbwritel(0, SPI_CONTROL);
+
+	if (rlen < 4)
+		data <<= ((4 - rlen) * 8);
+
+	while (rlen > 0) {
+		*rbuf = ((data >> 24) & 0xff);
+		data <<= 8;
+		rbuf++;
+		rlen--;
+	}
+	return 0;
+}
+
+#define DDB_MAGIC 'd'
+
+struct ddb_flashio {
+	__u8 *write_buf;
+	__u32 write_len;
+	__u8 *read_buf;
+	__u32 read_len;
+};
+
+#define IOCTL_DDB_FLASHIO  _IOWR(DDB_MAGIC, 0x00, struct ddb_flashio)
+
+#define DDB_NAME "ddbridge"
+
+static u32 ddb_num;
+static struct ddb *ddbs[32];
+static struct class *ddb_class;
+static int ddb_major;
+
+static int ddb_open(struct inode *inode, struct file *file)
+{
+	struct ddb *dev = ddbs[iminor(inode)];
+
+	file->private_data = dev;
+	return 0;
+}
+
+static long ddb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct ddb *dev = file->private_data;
+	void *parg = (void *)arg;
+	int res = -EFAULT;
+
+	switch (cmd) {
+	case IOCTL_DDB_FLASHIO:
+	{
+		struct ddb_flashio fio;
+		u8 *rbuf, *wbuf;
+
+		if (copy_from_user(&fio, parg, sizeof(fio)))
+			break;
+		if (fio.write_len + fio.read_len > 1028) {
+			printk(KERN_ERR "IOBUF too small\n");
+			return -ENOMEM;
+		}
+		wbuf = &dev->iobuf[0];
+		if (!wbuf)
+			return -ENOMEM;
+		rbuf = wbuf + fio.write_len;
+		if (copy_from_user(wbuf, fio.write_buf, fio.write_len)) {
+			vfree(wbuf);
+			break;
+		}
+		res = flashio(dev, wbuf, fio.write_len,
+			      rbuf, fio.read_len);
+		if (copy_to_user(fio.read_buf, rbuf, fio.read_len))
+			res = -EFAULT;
+		break;
+	}
+	default:
+		break;
+	}
+	return res;
+}
+
+static const struct file_operations ddb_fops = {
+	.unlocked_ioctl = ddb_ioctl,
+	.open           = ddb_open,
+};
+
+static char *ddb_devnode(struct device *device, mode_t *mode)
+{
+	struct ddb *dev = dev_get_drvdata(device);
+
+	return kasprintf(GFP_KERNEL, "ddbridge/card%d", dev->nr);
+}
+
+static int ddb_class_create(void)
+{
+	ddb_major = register_chrdev(0, DDB_NAME, &ddb_fops);
+	if (ddb_major < 0)
+		return ddb_major;
+
+	ddb_class = class_create(THIS_MODULE, DDB_NAME);
+	if (IS_ERR(ddb_class)) {
+		unregister_chrdev(ddb_major, DDB_NAME);
+		return -1;
+	}
+	ddb_class->devnode = ddb_devnode;
+	return 0;
+}
+
+static void ddb_class_destroy(void)
+{
+	class_destroy(ddb_class);
+	unregister_chrdev(ddb_major, DDB_NAME);
+}
+
+static int ddb_device_create(struct ddb *dev)
+{
+	dev->nr = ddb_num++;
+	dev->ddb_dev = device_create(ddb_class, NULL,
+				     MKDEV(ddb_major, dev->nr),
+				     dev, "ddbridge%d", dev->nr);
+	ddbs[dev->nr] = dev;
+	if (IS_ERR(dev->ddb_dev))
+		return -1;
+	return 0;
+}
+
+static void ddb_device_destroy(struct ddb *dev)
+{
+	ddb_num--;
+	if (IS_ERR(dev->ddb_dev))
+		return;
+	device_destroy(ddb_class, MKDEV(ddb_major, 0));
+}
+
+
+/****************************************************************************/
+/****************************************************************************/
+/****************************************************************************/
+
+static void ddb_unmap(struct ddb *dev)
+{
+	if (dev->regs)
+		iounmap(dev->regs);
+	vfree(dev);
+}
+
+
+static void __devexit ddb_remove(struct pci_dev *pdev)
+{
+	struct ddb *dev = (struct ddb *) pci_get_drvdata(pdev);
+
+	ddb_ports_detach(dev);
+	ddb_i2c_release(dev);
+
+	ddbwritel(0, INTERRUPT_ENABLE);
+	free_irq(dev->pdev->irq, dev);
+#ifdef CONFIG_PCI_MSI
+	if (dev->msi)
+		pci_disable_msi(dev->pdev);
+#endif
+	ddb_ports_release(dev);
+	ddb_buffers_free(dev);
+	ddb_device_destroy(dev);
+
+	ddb_unmap(dev);
+	pci_set_drvdata(pdev, 0);
+	pci_disable_device(pdev);
+}
+
+
+static int __devinit ddb_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *id)
+{
+	struct ddb *dev;
+	int stat = 0;
+	int irq_flag = IRQF_SHARED;
+
+	if (pci_enable_device(pdev) < 0)
+		return -ENODEV;
+
+	dev = vmalloc(sizeof(struct ddb));
+	if (dev == NULL)
+		return -ENOMEM;
+	memset(dev, 0, sizeof(struct ddb));
+
+	dev->pdev = pdev;
+	pci_set_drvdata(pdev, dev);
+	dev->info = (struct ddb_info *) id->driver_data;
+	printk(KERN_INFO "DDBridge driver detected: %s\n", dev->info->name);
+
+	dev->regs = ioremap(pci_resource_start(dev->pdev, 0),
+			    pci_resource_len(dev->pdev, 0));
+	if (!dev->regs) {
+		stat = -ENOMEM;
+		goto fail;
+	}
+	printk(KERN_INFO "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4));
+
+#ifdef CONFIG_PCI_MSI
+	if (pci_msi_enabled())
+		stat = pci_enable_msi(dev->pdev);
+	if (stat) {
+		printk(KERN_INFO ": MSI not available.\n");
+	} else {
+		irq_flag = 0;
+		dev->msi = 1;
+	}
+#endif
+	stat = request_irq(dev->pdev->irq, irq_handler,
+			   irq_flag, "DDBridge", (void *) dev);
+	if (stat < 0)
+		goto fail1;
+	ddbwritel(0, DMA_BASE_WRITE);
+	ddbwritel(0, DMA_BASE_READ);
+	ddbwritel(0xffffffff, INTERRUPT_ACK);
+	ddbwritel(0xfff0f, INTERRUPT_ENABLE);
+	ddbwritel(0, MSI1_ENABLE);
+
+	if (ddb_i2c_init(dev) < 0)
+		goto fail1;
+	ddb_ports_init(dev);
+	if (ddb_buffers_alloc(dev) < 0) {
+		printk(KERN_INFO ": Could not allocate buffer memory\n");
+		goto fail2;
+	}
+	if (ddb_ports_attach(dev) < 0)
+		goto fail3;
+	ddb_device_create(dev);
+	return 0;
+
+fail3:
+	ddb_ports_detach(dev);
+	printk(KERN_ERR "fail3\n");
+	ddb_ports_release(dev);
+fail2:
+	printk(KERN_ERR "fail2\n");
+	ddb_buffers_free(dev);
+fail1:
+	printk(KERN_ERR "fail1\n");
+	if (dev->msi)
+		pci_disable_msi(dev->pdev);
+	free_irq(dev->pdev->irq, dev);
+fail:
+	printk(KERN_ERR "fail\n");
+	ddb_unmap(dev);
+	pci_set_drvdata(pdev, 0);
+	pci_disable_device(pdev);
+	return -1;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+static struct ddb_info ddb_none = {
+	.type     = DDB_NONE,
+	.name     = "Digital Devices PCIe bridge",
+};
+
+static struct ddb_info ddb_octopus = {
+	.type     = DDB_OCTOPUS,
+	.name     = "Digital Devices Octopus DVB adapter",
+	.port_num = 4,
+};
+
+static struct ddb_info ddb_octopus_le = {
+	.type     = DDB_OCTOPUS,
+	.name     = "Digital Devices Octopus LE DVB adapter",
+	.port_num = 2,
+};
+
+static struct ddb_info ddb_v6 = {
+	.type     = DDB_OCTOPUS,
+	.name     = "Digital Devices Cine S2 V6 DVB adapter",
+	.port_num = 3,
+};
+
+#define DDVID 0xdd01 /* Digital Devices Vendor ID */
+
+#define DDB_ID(_vend, _dev, _subvend, _subdev, _driverdata) {	\
+	.vendor      = _vend,    .device    = _dev, \
+	.subvendor   = _subvend, .subdevice = _subdev, \
+	.driver_data = (unsigned long)&_driverdata }
+
+static const struct pci_device_id ddb_id_tbl[] __devinitdata = {
+	DDB_ID(DDVID, 0x0002, DDVID, 0x0001, ddb_octopus),
+	DDB_ID(DDVID, 0x0003, DDVID, 0x0001, ddb_octopus),
+	DDB_ID(DDVID, 0x0003, DDVID, 0x0002, ddb_octopus_le),
+	DDB_ID(DDVID, 0x0003, DDVID, 0x0010, ddb_octopus),
+	DDB_ID(DDVID, 0x0003, DDVID, 0x0020, ddb_v6),
+	/* in case sub-ids got deleted in flash */
+	DDB_ID(DDVID, 0x0003, PCI_ANY_ID, PCI_ANY_ID, ddb_none),
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, ddb_id_tbl);
+
+
+static struct pci_driver ddb_pci_driver = {
+	.name        = "DDBridge",
+	.id_table    = ddb_id_tbl,
+	.probe       = ddb_probe,
+	.remove      = ddb_remove,
+};
+
+static __init int module_init_ddbridge(void)
+{
+	printk(KERN_INFO "Digital Devices PCIE bridge driver, "
+	       "Copyright (C) 2010-11 Digital Devices GmbH\n");
+	if (ddb_class_create())
+		return -1;
+	return pci_register_driver(&ddb_pci_driver);
+}
+
+static __exit void module_exit_ddbridge(void)
+{
+	pci_unregister_driver(&ddb_pci_driver);
+	ddb_class_destroy();
+}
+
+module_init(module_init_ddbridge);
+module_exit(module_exit_ddbridge);
+
+MODULE_DESCRIPTION("Digital Devices PCIe Bridge");
+MODULE_AUTHOR("Ralph Metzler");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.5");
diff --git a/drivers/media/dvb/ddbridge/ddbridge-regs.h b/drivers/media/dvb/ddbridge/ddbridge-regs.h
new file mode 100644
index 0000000..a3ccb31
--- /dev/null
+++ b/drivers/media/dvb/ddbridge/ddbridge-regs.h
@@ -0,0 +1,151 @@
+/*
+ * ddbridge-regs.h: Digital Devices PCIe bridge driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+/* DD-DVBBridgeV1.h 273 2010-09-17 05:03:16Z manfred */
+
+/* Register Definitions */
+
+#define CUR_REGISTERMAP_VERSION 0x10000
+
+#define HARDWARE_VERSION       0x00
+#define REGISTERMAP_VERSION    0x04
+
+/* ------------------------------------------------------------------------- */
+/* SPI Controller */
+
+#define SPI_CONTROL     0x10
+#define SPI_DATA        0x14
+
+/* ------------------------------------------------------------------------- */
+
+/* Interrupt controller                                     */
+/* How many MSI's are available depends on HW (Min 2 max 8) */
+/* How many are usable also depends on Host platform        */
+
+#define INTERRUPT_BASE   (0x40)
+
+#define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00)
+#define MSI0_ENABLE      (INTERRUPT_BASE + 0x00)
+#define MSI1_ENABLE      (INTERRUPT_BASE + 0x04)
+#define MSI2_ENABLE      (INTERRUPT_BASE + 0x08)
+#define MSI3_ENABLE      (INTERRUPT_BASE + 0x0C)
+#define MSI4_ENABLE      (INTERRUPT_BASE + 0x10)
+#define MSI5_ENABLE      (INTERRUPT_BASE + 0x14)
+#define MSI6_ENABLE      (INTERRUPT_BASE + 0x18)
+#define MSI7_ENABLE      (INTERRUPT_BASE + 0x1C)
+
+#define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20)
+#define INTERRUPT_ACK    (INTERRUPT_BASE + 0x20)
+
+#define INTMASK_I2C1        (0x00000001)
+#define INTMASK_I2C2        (0x00000002)
+#define INTMASK_I2C3        (0x00000004)
+#define INTMASK_I2C4        (0x00000008)
+
+#define INTMASK_CIRQ1       (0x00000010)
+#define INTMASK_CIRQ2       (0x00000020)
+#define INTMASK_CIRQ3       (0x00000040)
+#define INTMASK_CIRQ4       (0x00000080)
+
+#define INTMASK_TSINPUT1    (0x00000100)
+#define INTMASK_TSINPUT2    (0x00000200)
+#define INTMASK_TSINPUT3    (0x00000400)
+#define INTMASK_TSINPUT4    (0x00000800)
+#define INTMASK_TSINPUT5    (0x00001000)
+#define INTMASK_TSINPUT6    (0x00002000)
+#define INTMASK_TSINPUT7    (0x00004000)
+#define INTMASK_TSINPUT8    (0x00008000)
+
+#define INTMASK_TSOUTPUT1   (0x00010000)
+#define INTMASK_TSOUTPUT2   (0x00020000)
+#define INTMASK_TSOUTPUT3   (0x00040000)
+#define INTMASK_TSOUTPUT4   (0x00080000)
+
+/* ------------------------------------------------------------------------- */
+/* I2C Master Controller */
+
+#define I2C_BASE        (0x80)  /* Byte offset */
+
+#define I2C_COMMAND     (0x00)
+#define I2C_TIMING      (0x04)
+#define I2C_TASKLENGTH  (0x08)     /* High read, low write */
+#define I2C_TASKADDRESS (0x0C)     /* High read, low write */
+
+#define I2C_MONITOR     (0x1C)
+
+#define I2C_BASE_1      (I2C_BASE + 0x00)
+#define I2C_BASE_2      (I2C_BASE + 0x20)
+#define I2C_BASE_3      (I2C_BASE + 0x40)
+#define I2C_BASE_4      (I2C_BASE + 0x60)
+
+#define I2C_BASE_N(i)   (I2C_BASE + (i) * 0x20)
+
+#define I2C_TASKMEM_BASE    (0x1000)    /* Byte offset */
+#define I2C_TASKMEM_SIZE    (0x1000)
+
+#define I2C_SPEED_400   (0x04030404)
+#define I2C_SPEED_200   (0x09080909)
+#define I2C_SPEED_154   (0x0C0B0C0C)
+#define I2C_SPEED_100   (0x13121313)
+#define I2C_SPEED_77    (0x19181919)
+#define I2C_SPEED_50    (0x27262727)
+
+
+/* ------------------------------------------------------------------------- */
+/* DMA  Controller */
+
+#define DMA_BASE_WRITE        (0x100)
+#define DMA_BASE_READ         (0x140)
+
+#define DMA_CONTROL     (0x00)                  /* 64 */
+#define DMA_ERROR       (0x04)                  /* 65 ( only read instance ) */
+
+#define DMA_DIAG_CONTROL                (0x1C)  /* 71 */
+#define DMA_DIAG_PACKETCOUNTER_LOW      (0x20)  /* 72 */
+#define DMA_DIAG_PACKETCOUNTER_HIGH     (0x24)  /* 73 */
+#define DMA_DIAG_TIMECOUNTER_LOW        (0x28)  /* 74 */
+#define DMA_DIAG_TIMECOUNTER_HIGH       (0x2C)  /* 75 */
+#define DMA_DIAG_RECHECKCOUNTER         (0x30)  /* 76  ( Split completions on read ) */
+#define DMA_DIAG_WAITTIMEOUTINIT        (0x34)  /* 77 */
+#define DMA_DIAG_WAITOVERFLOWCOUNTER    (0x38)  /* 78 */
+#define DMA_DIAG_WAITCOUNTER            (0x3C)  /* 79 */
+
+/* ------------------------------------------------------------------------- */
+/* DMA  Buffer */
+
+#define TS_INPUT_BASE       (0x200)
+#define TS_INPUT_CONTROL(i)         (TS_INPUT_BASE + (i) * 16 + 0x00)
+
+#define TS_OUTPUT_BASE       (0x280)
+#define TS_OUTPUT_CONTROL(i)         (TS_OUTPUT_BASE + (i) * 16 + 0x00)
+
+#define DMA_BUFFER_BASE     (0x300)
+
+#define DMA_BUFFER_CONTROL(i)       (DMA_BUFFER_BASE + (i) * 16 + 0x00)
+#define DMA_BUFFER_ACK(i)           (DMA_BUFFER_BASE + (i) * 16 + 0x04)
+#define DMA_BUFFER_CURRENT(i)       (DMA_BUFFER_BASE + (i) * 16 + 0x08)
+#define DMA_BUFFER_SIZE(i)          (DMA_BUFFER_BASE + (i) * 16 + 0x0c)
+
+#define DMA_BASE_ADDRESS_TABLE  (0x2000)
+#define DMA_BASE_ADDRESS_TABLE_ENTRIES (512)
+
diff --git a/drivers/media/dvb/ddbridge/ddbridge.h b/drivers/media/dvb/ddbridge/ddbridge.h
new file mode 100644
index 0000000..6d14893
--- /dev/null
+++ b/drivers/media/dvb/ddbridge/ddbridge.h
@@ -0,0 +1,187 @@
+/*
+ * ddbridge.h: Digital Devices PCIe bridge driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef _DDBRIDGE_H_
+#define _DDBRIDGE_H_
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <asm/dma.h>
+#include <linux/dvb/frontend.h>
+#include <linux/dvb/ca.h>
+#include <linux/dvb/video.h>
+#include <linux/dvb/audio.h>
+#include <linux/socket.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_ringbuffer.h"
+#include "dvb_ca_en50221.h"
+#include "dvb_net.h"
+#include "cxd2099.h"
+
+#define DDB_MAX_I2C     4
+#define DDB_MAX_PORT    4
+#define DDB_MAX_INPUT   8
+#define DDB_MAX_OUTPUT  4
+
+struct ddb_info {
+	int   type;
+#define DDB_NONE         0
+#define DDB_OCTOPUS      1
+	char *name;
+	int   port_num;
+	u32   port_type[DDB_MAX_PORT];
+};
+
+/* DMA_SIZE MUST be divisible by 188 and 128 !!! */
+
+#define INPUT_DMA_MAX_BUFS 32      /* hardware table limit */
+#define INPUT_DMA_BUFS 8
+#define INPUT_DMA_SIZE (128*47*21)
+
+#define OUTPUT_DMA_MAX_BUFS 32
+#define OUTPUT_DMA_BUFS 8
+#define OUTPUT_DMA_SIZE (128*47*21)
+
+struct ddb;
+struct ddb_port;
+
+struct ddb_input {
+	struct ddb_port       *port;
+	u32                    nr;
+	int                    attached;
+
+	dma_addr_t             pbuf[INPUT_DMA_MAX_BUFS];
+	u8                    *vbuf[INPUT_DMA_MAX_BUFS];
+	u32                    dma_buf_num;
+	u32                    dma_buf_size;
+
+	struct tasklet_struct  tasklet;
+	spinlock_t             lock;
+	wait_queue_head_t      wq;
+	int                    running;
+	u32                    stat;
+	u32                    cbuf;
+	u32                    coff;
+
+	struct dvb_adapter     adap;
+	struct dvb_device     *dev;
+	struct dvb_frontend   *fe;
+	struct dvb_frontend   *fe2;
+	struct dmxdev          dmxdev;
+	struct dvb_demux       demux;
+	struct dvb_net         dvbnet;
+	struct dmx_frontend    hw_frontend;
+	struct dmx_frontend    mem_frontend;
+	int                    users;
+	int (*gate_ctrl)(struct dvb_frontend *, int);
+};
+
+struct ddb_output {
+	struct ddb_port       *port;
+	u32                    nr;
+	dma_addr_t             pbuf[OUTPUT_DMA_MAX_BUFS];
+	u8                    *vbuf[OUTPUT_DMA_MAX_BUFS];
+	u32                    dma_buf_num;
+	u32                    dma_buf_size;
+	struct tasklet_struct  tasklet;
+	spinlock_t             lock;
+	wait_queue_head_t      wq;
+	int                    running;
+	u32                    stat;
+	u32                    cbuf;
+	u32                    coff;
+
+	struct dvb_adapter     adap;
+	struct dvb_device     *dev;
+};
+
+struct ddb_i2c {
+	struct ddb            *dev;
+	u32                    nr;
+	struct i2c_adapter     adap;
+	struct i2c_adapter     adap2;
+	u32                    regs;
+	u32                    rbuf;
+	u32                    wbuf;
+	int                    done;
+	wait_queue_head_t      wq;
+};
+
+struct ddb_port {
+	struct ddb            *dev;
+	u32                    nr;
+	struct ddb_i2c        *i2c;
+	struct mutex           i2c_gate_lock;
+	u32                    class;
+#define DDB_PORT_NONE           0
+#define DDB_PORT_CI             1
+#define DDB_PORT_TUNER          2
+	u32                    type;
+#define DDB_TUNER_NONE          0
+#define DDB_TUNER_DVBS_ST       1
+#define DDB_TUNER_DVBS_ST_AA    2
+#define DDB_TUNER_DVBCT_TR     16
+#define DDB_TUNER_DVBCT_ST     17
+	u32                    adr;
+
+	struct ddb_input      *input[2];
+	struct ddb_output     *output;
+	struct dvb_ca_en50221 *en;
+};
+
+struct ddb {
+	struct pci_dev        *pdev;
+	unsigned char         *regs;
+	struct ddb_port        port[DDB_MAX_PORT];
+	struct ddb_i2c         i2c[DDB_MAX_I2C];
+	struct ddb_input       input[DDB_MAX_INPUT];
+	struct ddb_output      output[DDB_MAX_OUTPUT];
+
+	struct device         *ddb_dev;
+	int                    nr;
+	u8                     iobuf[1028];
+
+	struct ddb_info       *info;
+	int                    msi;
+};
+
+/****************************************************************************/
+
+#define ddbwritel(_val, _adr)        writel((_val), \
+				     (char *) (dev->regs+(_adr)))
+#define ddbreadl(_adr)               readl((char *) (dev->regs+(_adr)))
+#define ddbcpyto(_adr, _src, _count) memcpy_toio((char *)	\
+				     (dev->regs+(_adr)), (_src), (_count))
+#define ddbcpyfrom(_dst, _adr, _count) memcpy_fromio((_dst), (char *) \
+				       (dev->regs+(_adr)), (_count))
+
+/****************************************************************************/
+
+#endif
diff --git a/drivers/media/dvb/dvb-core/Makefile b/drivers/media/dvb/dvb-core/Makefile
index 0b51828..8f22bcd 100644
--- a/drivers/media/dvb/dvb-core/Makefile
+++ b/drivers/media/dvb/dvb-core/Makefile
@@ -2,8 +2,10 @@
 # Makefile for the kernel DVB device drivers.
 #
 
+dvb-net-$(CONFIG_DVB_NET) := dvb_net.o
+
 dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o 	\
 		 dvb_ca_en50221.o dvb_frontend.o 		\
-		 dvb_net.o dvb_ringbuffer.o dvb_math.o
+		 $(dvb-net-y) dvb_ringbuffer.o dvb_math.o
 
 obj-$(CONFIG_DVB_CORE) += dvb-core.o
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 5b6b451..efe9c30 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -904,7 +904,7 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe)
 	.buffer = b \
 }
 
-static struct dtv_cmds_h dtv_cmds[] = {
+static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = {
 	_DTV_CMD(DTV_TUNE, 1, 0),
 	_DTV_CMD(DTV_CLEAR, 1, 0),
 
@@ -966,6 +966,7 @@ static struct dtv_cmds_h dtv_cmds[] = {
 	_DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 0, 0),
 
 	_DTV_CMD(DTV_ISDBS_TS_ID, 1, 0),
+	_DTV_CMD(DTV_DVBT2_PLP_ID, 1, 0),
 
 	/* Get */
 	_DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1),
diff --git a/drivers/media/dvb/dvb-core/dvb_net.h b/drivers/media/dvb/dvb-core/dvb_net.h
index 3a3126ca..1e53acd 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.h
+++ b/drivers/media/dvb/dvb-core/dvb_net.h
@@ -32,6 +32,8 @@
 
 #define DVB_NET_DEVICES_MAX 10
 
+#ifdef CONFIG_DVB_NET
+
 struct dvb_net {
 	struct dvb_device *dvbdev;
 	struct net_device *device[DVB_NET_DEVICES_MAX];
@@ -40,8 +42,25 @@ struct dvb_net {
 	struct dmx_demux *demux;
 };
 
-
 void dvb_net_release(struct dvb_net *);
 int  dvb_net_init(struct dvb_adapter *, struct dvb_net *, struct dmx_demux *);
 
+#else
+
+struct dvb_net {
+	struct dvb_device *dvbdev;
+};
+
+static inline void dvb_net_release(struct dvb_net *dvbnet)
+{
+}
+
+static inline int dvb_net_init(struct dvb_adapter *adap,
+			       struct dvb_net *dvbnet, struct dmx_demux *dmx)
+{
+	return 0;
+}
+
+#endif /* ifdef CONFIG_DVB_NET */
+
 #endif
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index e85304c..5d73dec 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -81,6 +81,7 @@ config DVB_USB_DIB0700
 	select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 100ebc3..d7ad05f 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -91,7 +91,6 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	case GET_CONFIG:
 	case READ_MEMORY:
 	case RECONNECT_USB:
-	case GET_IR_CODE:
 		write = 0;
 		break;
 	case READ_I2C:
@@ -164,13 +163,6 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	deb_xfer("<<< ");
 	debug_dump(buf, act_len, deb_xfer);
 
-	/* remote controller query status is 1 if remote code is not received */
-	if (req->cmd == GET_IR_CODE && buf[1] == 1) {
-		buf[1] = 0; /* clear command "error" status */
-		memset(&buf[2], 0, req->data_len);
-		buf[3] = 1; /* no remote code received mark */
-	}
-
 	/* check status */
 	if (buf[1]) {
 		err("command failed:%d", buf[1]);
@@ -292,6 +284,10 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
 		}
 
 		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+			if (msg[i].len > 3 || msg[i+1].len > 61) {
+				ret = -EOPNOTSUPP;
+				goto error;
+			}
 			if (msg[i].addr ==
 				af9015_af9013_config[0].demod_address)
 				req.cmd = READ_MEMORY;
@@ -306,12 +302,16 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
 			ret = af9015_ctrl_msg(d, &req);
 			i += 2;
 		} else if (msg[i].flags & I2C_M_RD) {
-			ret = -EINVAL;
+			if (msg[i].len > 61) {
+				ret = -EOPNOTSUPP;
+				goto error;
+			}
 			if (msg[i].addr ==
-				af9015_af9013_config[0].demod_address)
+				af9015_af9013_config[0].demod_address) {
+				ret = -EINVAL;
 				goto error;
-			else
-				req.cmd = READ_I2C;
+			}
+			req.cmd = READ_I2C;
 			req.i2c_addr = msg[i].addr;
 			req.addr = addr;
 			req.mbox = mbox;
@@ -321,6 +321,10 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
 			ret = af9015_ctrl_msg(d, &req);
 			i += 1;
 		} else {
+			if (msg[i].len > 21) {
+				ret = -EOPNOTSUPP;
+				goto error;
+			}
 			if (msg[i].addr ==
 				af9015_af9013_config[0].demod_address)
 				req.cmd = WRITE_MEMORY;
@@ -735,6 +739,7 @@ static const struct af9015_rc_setup af9015_rc_setup_hashes[] = {
 	{ 0xb8feb708, RC_MAP_MSI_DIGIVOX_II },
 	{ 0xa3703d00, RC_MAP_ALINK_DTU_M },
 	{ 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */
+	{ 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */
 	{ }
 };
 
@@ -749,6 +754,8 @@ static const struct af9015_rc_setup af9015_rc_setup_usbids[] = {
 		RC_MAP_AZUREWAVE_AD_TU700 },
 	{ (USB_VID_MSI_2 << 16) + USB_PID_MSI_DIGI_VOX_MINI_III,
 		RC_MAP_MSI_DIGIVOX_III },
+	{ (USB_VID_MSI_2 << 16) + USB_PID_MSI_DIGIVOX_DUO,
+		RC_MAP_MSI_DIGIVOX_III },
 	{ (USB_VID_LEADTEK << 16) + USB_PID_WINFAST_DTV_DONGLE_GOLD,
 		RC_MAP_LEADTEK_Y04G0051 },
 	{ (USB_VID_AVERMEDIA << 16) + USB_PID_AVERMEDIA_VOLAR_X,
@@ -759,6 +766,8 @@ static const struct af9015_rc_setup af9015_rc_setup_usbids[] = {
 		RC_MAP_DIGITALNOW_TINYTWIN },
 	{ (USB_VID_GTEK << 16) + USB_PID_TINYTWIN_3,
 		RC_MAP_DIGITALNOW_TINYTWIN },
+	{ (USB_VID_KWORLD_2 << 16) + USB_PID_SVEON_STV22,
+		RC_MAP_MSI_DIGIVOX_III },
 	{ }
 };
 
@@ -1082,44 +1091,11 @@ error:
 	return ret;
 }
 
-/* init 2nd I2C adapter */
-static int af9015_i2c_init(struct dvb_usb_device *d)
-{
-	int ret;
-	struct af9015_state *state = d->priv;
-	deb_info("%s:\n", __func__);
-
-	strncpy(state->i2c_adap.name, d->desc->name,
-		sizeof(state->i2c_adap.name));
-	state->i2c_adap.algo      = d->props.i2c_algo;
-	state->i2c_adap.algo_data = NULL;
-	state->i2c_adap.dev.parent = &d->udev->dev;
-
-	i2c_set_adapdata(&state->i2c_adap, d);
-
-	ret = i2c_add_adapter(&state->i2c_adap);
-	if (ret < 0)
-		err("could not add i2c adapter");
-
-	return ret;
-}
-
 static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	int ret;
-	struct af9015_state *state = adap->dev->priv;
-	struct i2c_adapter *i2c_adap;
-
-	if (adap->id == 0) {
-		/* select I2C adapter */
-		i2c_adap = &adap->dev->i2c_adap;
-
-		deb_info("%s: init I2C\n", __func__);
-		ret = af9015_i2c_init(adap->dev);
-	} else {
-		/* select I2C adapter */
-		i2c_adap = &state->i2c_adap;
 
+	if (adap->id == 1) {
 		/* copy firmware to 2nd demodulator */
 		if (af9015_config.dual_mode) {
 			ret = af9015_copy_firmware(adap->dev);
@@ -1136,7 +1112,7 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
 
 	/* attach demodulator */
 	adap->fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id],
-		i2c_adap);
+		&adap->dev->i2c_adap);
 
 	return adap->fe == NULL ? -ENODEV : 0;
 }
@@ -1206,57 +1182,56 @@ static struct mxl5007t_config af9015_mxl5007t_config = {
 
 static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
 {
-	struct af9015_state *state = adap->dev->priv;
-	struct i2c_adapter *i2c_adap;
 	int ret;
 	deb_info("%s:\n", __func__);
 
-	/* select I2C adapter */
-	if (adap->id == 0)
-		i2c_adap = &adap->dev->i2c_adap;
-	else
-		i2c_adap = &state->i2c_adap;
-
 	switch (af9015_af9013_config[adap->id].tuner) {
 	case AF9013_TUNER_MT2060:
 	case AF9013_TUNER_MT2060_2:
-		ret = dvb_attach(mt2060_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mt2060_attach, adap->fe, &adap->dev->i2c_adap,
 			&af9015_mt2060_config,
 			af9015_config.mt2060_if1[adap->id])
 			== NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_QT1010:
 	case AF9013_TUNER_QT1010A:
-		ret = dvb_attach(qt1010_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap,
 			&af9015_qt1010_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_TDA18271:
-		ret = dvb_attach(tda18271_attach, adap->fe, 0xc0, i2c_adap,
+		ret = dvb_attach(tda18271_attach, adap->fe, 0xc0,
+			&adap->dev->i2c_adap,
 			&af9015_tda18271_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_TDA18218:
-		ret = dvb_attach(tda18218_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(tda18218_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_tda18218_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MXL5003D:
-		ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mxl5005s_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_mxl5003_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MXL5005D:
 	case AF9013_TUNER_MXL5005R:
-		ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mxl5005s_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_mxl5005_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_ENV77H11D5:
-		ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0, i2c_adap,
+		ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0,
+			&adap->dev->i2c_adap,
 			DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MC44S803:
-		ret = dvb_attach(mc44s803_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mc44s803_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_mc44s803_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MXL5007T:
-		ret = dvb_attach(mxl5007t_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mxl5007t_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_UNKNOWN:
@@ -1309,6 +1284,7 @@ static struct usb_device_id af9015_usb_table[] = {
 		USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC)},
 /* 35 */{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T)},
 	{USB_DEVICE(USB_VID_GTEK,      USB_PID_TINYTWIN_3)},
+	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_SVEON_STV22)},
 	{0},
 };
 MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1502,7 +1478,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 
 		.i2c_algo = &af9015_i2c_algo,
 
-		.num_device_descs = 9, /* check max from dvb-usb.h */
+		.num_device_descs = 10, /* check max from dvb-usb.h */
 		.devices = {
 			{
 				.name = "Xtensions XD-380",
@@ -1554,6 +1530,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 				.cold_ids = {&af9015_usb_table[20], NULL},
 				.warm_ids = {NULL},
 			},
+			{
+				.name = "Sveon STV22 Dual USB DVB-T Tuner HDTV",
+				.cold_ids = {&af9015_usb_table[37], NULL},
+				.warm_ids = {NULL},
+			},
 		}
 	}, {
 		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
@@ -1704,33 +1685,11 @@ static int af9015_usb_probe(struct usb_interface *intf,
 	return ret;
 }
 
-static void af9015_i2c_exit(struct dvb_usb_device *d)
-{
-	struct af9015_state *state = d->priv;
-	deb_info("%s:\n", __func__);
-
-	/* remove 2nd I2C adapter */
-	if (d->state & DVB_USB_STATE_I2C)
-		i2c_del_adapter(&state->i2c_adap);
-}
-
-static void af9015_usb_device_exit(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-	deb_info("%s:\n", __func__);
-
-	/* remove 2nd I2C adapter */
-	if (d != NULL && d->desc != NULL)
-		af9015_i2c_exit(d);
-
-	dvb_usb_device_exit(intf);
-}
-
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver af9015_usb_driver = {
 	.name = "dvb_usb_af9015",
 	.probe = af9015_usb_probe,
-	.disconnect = af9015_usb_device_exit,
+	.disconnect = dvb_usb_device_exit,
 	.id_table = af9015_usb_table,
 };
 
diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h
index beb3004..6252ea6 100644
--- a/drivers/media/dvb/dvb-usb/af9015.h
+++ b/drivers/media/dvb/dvb-usb/af9015.h
@@ -99,7 +99,6 @@ enum af9015_ir_mode {
 };
 
 struct af9015_state {
-	struct i2c_adapter i2c_adap; /* I2C adapter for 2nd FE */
 	u8 rc_repeat;
 	u32 rc_keycode;
 	u8 rc_last[4];
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 7c327b5..2cbf19a 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -347,15 +347,17 @@ static struct isl6423_config anysee_isl6423_config = {
  * PCB: ?
  * parts: DNOS404ZH102A(MT352, DTT7579(?))
  *
- * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
- * PCB: ?
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)"
+ * PCB: PCB 507T (rev1.61)
  * parts: DNOS404ZH103A(ZL10353, DTT7579(?))
+ * OEA=0a OEB=00 OEC=00 OED=ff OEE=00
+ * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00
  *
  * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
  * PCB: 507CD (rev1.1)
  * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01
- * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
- * IOA=4f IOB=ff IOC=00 IOD=06 IOF=01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01
  * IOD[0] ZL10353 1=enabled
  * IOA[7] TS 0=enabled
  * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
@@ -363,30 +365,30 @@ static struct isl6423_config anysee_isl6423_config = {
  * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
  * PCB: 507DC (rev0.2)
  * parts: TDA10023, DTOS403IH102B TM, CST56I01
- * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
- * IOA=4f IOB=ff IOC=00 IOD=26 IOF=01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01
  * IOD[0] TDA10023 1=enabled
  *
  * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)"
  * PCB: 507SI (rev2.1)
  * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEF=fe
- * IOA=4d IOB=ff IOC=00 IOD=26 IOF=01
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe
+ * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01
  * IOD[0] CX24116 1=enabled
  *
  * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
  * PCB: 507FA (rev0.4)
  * parts: TDA10023, DTOS403IH102B TM, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
- * IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
  * IOD[5] TDA10023 1=enabled
  * IOE[0] tuner 1=enabled
  *
  * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
  * PCB: 507FA (rev1.1)
  * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
- * IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
  * DVB-C:
  * IOD[5] TDA10023 1=enabled
  * IOE[0] tuner 1=enabled
@@ -398,8 +400,8 @@ static struct isl6423_config anysee_isl6423_config = {
  * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
  * PCB: 508TC (rev0.6)
  * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
- * OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff
- * IOA=4d IOB=00 IOC=cc IOD=48 IOF=e4
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
  * IOA[7] TS 1=enabled
  * IOE[4] TDA18212 1=enabled
  * DVB-C:
@@ -414,11 +416,34 @@ static struct isl6423_config anysee_isl6423_config = {
  * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)"
  * PCB: 508S2 (rev0.7)
  * parts: DNBU10512IST(STV0903, STV6110), ISL6423
- * OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff
- * IOA=4d IOB=00 IOC=c4 IOD=08 IOF=e4
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
  * IOA[7] TS 1=enabled
  * IOE[5] STV0903 1=enabled
  *
+ * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)"
+ * PCB: 508PTC (rev0.5)
+ * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[4] TDA18212 1=enabled
+ * DVB-C:
+ * IOD[6] ZL10353 0=disabled
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] IF 1=enabled
+ * DVB-T:
+ * IOD[5] TDA10023 0=disabled
+ * IOD[6] ZL10353 1=enabled
+ * IOE[0] IF 0=enabled
+ *
+ * E7 S2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)"
+ * PCB: 508PS2 (rev0.4)
+ * parts: DNBU10512IST(STV0903, STV6110), ISL6423
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] STV0903 1=enabled
  */
 
 static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
@@ -459,7 +484,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 	state->hw = hw_info[0];
 
 	switch (state->hw) {
-	case ANYSEE_HW_02: /* 2 */
+	case ANYSEE_HW_507T: /* 2 */
 		/* E30 */
 
 		/* attach demod */
@@ -593,7 +618,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
 		/* E7 TC */
+		/* E7 PTC */
 
 		/* enable transport stream on IOA[7] */
 		ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
@@ -650,7 +677,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508S2: /* 19 */
+	case ANYSEE_HW_508PS2: /* 22 */
 		/* E7 S2 */
+		/* E7 PS2 */
 
 		/* enable transport stream on IOA[7] */
 		ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
@@ -687,7 +716,7 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 	deb_info("%s:\n", __func__);
 
 	switch (state->hw) {
-	case ANYSEE_HW_02: /* 2 */
+	case ANYSEE_HW_507T: /* 2 */
 		/* E30 */
 
 		/* attach tuner */
@@ -762,7 +791,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
 		/* E7 TC */
+		/* E7 PTC */
 
 		/* enable tuner on IOE[4] */
 		ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10);
@@ -775,7 +806,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508S2: /* 19 */
+	case ANYSEE_HW_508PS2: /* 22 */
 		/* E7 S2 */
+		/* E7 PS2 */
 
 		/* attach tuner */
 		fe = dvb_attach(stv6110_attach, adap->fe,
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
index a7673aa..ad6ccd1 100644
--- a/drivers/media/dvb/dvb-usb/anysee.h
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -61,13 +61,15 @@ struct anysee_state {
 	u8 seq;
 };
 
-#define ANYSEE_HW_02     2 /* E30 */
-#define ANYSEE_HW_507CD  6 /* E30 Plus */
-#define ANYSEE_HW_507DC 10 /* E30 C Plus */
-#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */
-#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */
-#define ANYSEE_HW_508TC 18 /* E7 TC */
-#define ANYSEE_HW_508S2 19 /* E7 S2 */
+#define ANYSEE_HW_507T    2 /* E30 */
+#define ANYSEE_HW_507CD   6 /* E30 Plus */
+#define ANYSEE_HW_507DC  10 /* E30 C Plus */
+#define ANYSEE_HW_507SI  11 /* E30 S2 Plus */
+#define ANYSEE_HW_507FA  15 /* E30 Combo Plus / E30 C Plus */
+#define ANYSEE_HW_508TC  18 /* E7 TC */
+#define ANYSEE_HW_508S2  19 /* E7 S2 */
+#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */
+#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */
 
 #define REG_IOA       0x80 /* Port A (bit addressable) */
 #define REG_IOB       0x90 /* Port B (bit addressable) */
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index c519ad5..d0ea5b6 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -17,6 +17,7 @@
 #include "mt2266.h"
 #include "tuner-xc2028.h"
 #include "xc5000.h"
+#include "xc4000.h"
 #include "s5h1411.h"
 #include "dib0070.h"
 #include "dib0090.h"
@@ -2655,6 +2656,156 @@ static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
 		== NULL ? -ENODEV : 0;
 }
 
+static int dib0700_xc4000_tuner_callback(void *priv, int component,
+					 int command, int arg)
+{
+	struct dvb_usb_adapter *adap = priv;
+
+	if (command == XC4000_TUNER_RESET) {
+		/* Reset the tuner */
+		dib7000p_set_gpio(adap->fe, 8, 0, 0);
+		msleep(10);
+		dib7000p_set_gpio(adap->fe, 8, 0, 1);
+	} else {
+		err("xc4000: unknown tuner callback command: %d\n", command);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
+	.band_caps = BAND_UHF | BAND_VHF,
+	.setup = 0x64,
+	.inv_gain = 0x02c8,
+	.time_stabiliz = 0x15,
+	.alpha_level = 0x00,
+	.thlock = 0x76,
+	.wbd_inv = 0x01,
+	.wbd_ref = 0x0b33,
+	.wbd_sel = 0x00,
+	.wbd_alpha = 0x02,
+	.agc1_max = 0x00,
+	.agc1_min = 0x00,
+	.agc2_max = 0x9b26,
+	.agc2_min = 0x26ca,
+	.agc1_pt1 = 0x00,
+	.agc1_pt2 = 0x00,
+	.agc1_pt3 = 0x00,
+	.agc1_slope1 = 0x00,
+	.agc1_slope2 = 0x00,
+	.agc2_pt1 = 0x00,
+	.agc2_pt2 = 0x80,
+	.agc2_slope1 = 0x1d,
+	.agc2_slope2 = 0x1d,
+	.alpha_mant = 0x11,
+	.alpha_exp = 0x1b,
+	.beta_mant = 0x17,
+	.beta_exp = 0x33,
+	.perform_agc_softsplit = 0x00,
+};
+
+static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
+	60000, 30000,	/* internal, sampling */
+	1, 8, 3, 1, 0,	/* pll_cfg: prediv, ratio, range, reset, bypass */
+	0, 0, 1, 1, 0,	/* misc: refdiv, bypclk_div, IO_CLK_en_core, */
+			/* ADClkSrc, modulo */
+	(3 << 14) | (1 << 12) | 524,	/* sad_cfg: refsel, sel, freq_15k */
+	39370534,	/* ifreq */
+	20452225,	/* timf */
+	30000000	/* xtal */
+};
+
+/* FIXME: none of these inputs are validated yet */
+static struct dib7000p_config pctv_340e_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &stk7700p_7000p_xc4000_agc_config,
+	.bw  = &stk7700p_xc4000_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+/* PCTV 340e GPIOs map:
+   dib0700:
+   GPIO2  - CX25843 sleep
+   GPIO3  - CS5340 reset
+   GPIO5  - IRD
+   GPIO6  - Power Supply
+   GPIO8  - LNA (1=off 0=on)
+   GPIO10 - CX25843 reset
+   dib7000:
+   GPIO8  - xc4000 reset
+ */
+static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* Power Supply on */
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0);
+	msleep(50);
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1);
+	msleep(100); /* Allow power supply to settle before probing */
+
+	/* cx25843 reset */
+	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 0);
+	msleep(1); /* cx25843 datasheet say 350us required */
+	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 1);
+
+	/* LNA off for now */
+	dib0700_set_gpio(adap->dev, GPIO8,  GPIO_OUT, 1);
+
+	/* Put the CX25843 to sleep for now since we're in digital mode */
+	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
+
+	/* FIXME: not verified yet */
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(500);
+
+	if (dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
+		/* Demodulator not found for some reason? */
+		return -ENODEV;
+	}
+
+	adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12,
+			      &pctv_340e_config);
+	st->is_dib7000pc = 1;
+
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+static struct xc4000_config dib7000p_xc4000_tunerconfig = {
+	.i2c_address	  = 0x61,
+	.default_pm	  = 1,
+	.dvb_amplitude	  = 0,
+	.set_smoothedcvbs = 0,
+	.if_khz		  = 5400
+};
+
+static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *tun_i2c;
+
+	/* The xc4000 is not on the main i2c bus */
+	tun_i2c = dib7000p_get_i2c_master(adap->fe,
+					  DIBX000_I2C_INTERFACE_TUNER, 1);
+	if (tun_i2c == NULL) {
+		printk(KERN_ERR "Could not reach tuner i2c bus\n");
+		return 0;
+	}
+
+	/* Setup the reset callback */
+	adap->fe->callback = dib0700_xc4000_tuner_callback;
+
+	return dvb_attach(xc4000_attach, adap->fe, tun_i2c,
+			  &dib7000p_xc4000_tunerconfig)
+		== NULL ? -ENODEV : 0;
+}
+
 static struct lgdt3305_config hcw_lgdt3305_config = {
 	.i2c_addr           = 0x0e,
 	.mpeg_mode          = LGDT3305_MPEG_PARALLEL,
@@ -2802,6 +2953,8 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7090PVR) },
 	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) },
 /* 75 */{ USB_DEVICE(USB_VID_MEDION,    USB_PID_CREATIX_CTX1921) },
+	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E) },
+	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E_SE) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -3772,6 +3925,41 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = pctv340e_frontend_attach,
+				.tuner_attach     = xc4000_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv = sizeof(struct
+						dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "Pinnacle PCTV 340e HD Pro USB Stick",
+				{ &dib0700_usb_id_table[76], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV Hybrid Stick Solo",
+				{ &dib0700_usb_id_table[77], NULL },
+				{ NULL },
+			},
+		},
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
 	},
 };
 
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 21b1549..2a79b8f 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -230,6 +230,8 @@
 #define USB_PID_PINNACLE_PCTV310E			0x3211
 #define USB_PID_PINNACLE_PCTV801E			0x023a
 #define USB_PID_PINNACLE_PCTV801E_SE			0x023b
+#define USB_PID_PINNACLE_PCTV340E			0x023d
+#define USB_PID_PINNACLE_PCTV340E_SE			0x023e
 #define USB_PID_PINNACLE_PCTV73A			0x0243
 #define USB_PID_PINNACLE_PCTV73ESE			0x0245
 #define USB_PID_PINNACLE_PCTV74E			0x0246
@@ -313,6 +315,7 @@
 #define USB_PID_FRIIO_WHITE				0x0001
 #define USB_PID_TVWAY_PLUS				0x0002
 #define USB_PID_SVEON_STV20				0xe39d
+#define USB_PID_SVEON_STV22				0xe401
 #define USB_PID_AZUREWAVE_AZ6027			0x3275
 #define USB_PID_TERRATEC_DVBS2CI_V1			0x10a4
 #define USB_PID_TERRATEC_DVBS2CI_V2			0x10ac
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 76a8096..7d35d07 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -85,7 +85,7 @@ static inline u8 rc5_data(struct rc_map_table *key)
 	return key->scancode & 0xff;
 }
 
-static inline u8 rc5_scan(struct rc_map_table *key)
+static inline u16 rc5_scan(struct rc_map_table *key)
 {
 	return key->scancode & 0xffff;
 }
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h
index 831749a..ed32b9d 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.h
+++ b/drivers/media/dvb/dvb-usb/gp8psk.h
@@ -78,9 +78,6 @@ extern int dvb_usb_gp8psk_debug;
 #define ADV_MOD_DVB_BPSK 9     /* DVB-S BPSK */
 
 #define GET_USB_SPEED                     0x07
- #define USB_SPEED_LOW                    0
- #define USB_SPEED_FULL                   1
- #define USB_SPEED_HIGH                   2
 
 #define RESET_FX2                         0x13
 
diff --git a/drivers/media/dvb/dvb-usb/technisat-usb2.c b/drivers/media/dvb/dvb-usb/technisat-usb2.c
index 08f8842..473b95e 100644
--- a/drivers/media/dvb/dvb-usb/technisat-usb2.c
+++ b/drivers/media/dvb/dvb-usb/technisat-usb2.c
@@ -765,10 +765,8 @@ static void technisat_usb2_disconnect(struct usb_interface *intf)
 	/* work and stuff was only created when the device is is hot-state */
 	if (dev != NULL) {
 		struct technisat_usb2_state *state = dev->priv;
-		if (state != NULL) {
+		if (state != NULL)
 			cancel_delayed_work_sync(&state->green_led_work);
-			flush_scheduled_work();
-		}
 	}
 
 	dvb_usb_device_exit(intf);
diff --git a/drivers/media/dvb/dvb-usb/vp7045.h b/drivers/media/dvb/dvb-usb/vp7045.h
index 969688f..cf5ec46 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.h
+++ b/drivers/media/dvb/dvb-usb/vp7045.h
@@ -36,9 +36,6 @@
  #define Tuner_Power_OFF                  0
 
 #define GET_USB_SPEED                     0x07
- #define USB_SPEED_LOW                    0
- #define USB_SPEED_FULL                   1
- #define USB_SPEED_HIGH                   2
 
 #define LOCK_TUNER_COMMAND                0x09
 
diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c
index 21c52e3..489ae82 100644
--- a/drivers/media/dvb/firewire/firedtv-avc.c
+++ b/drivers/media/dvb/firewire/firedtv-avc.c
@@ -1208,7 +1208,7 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
 	if (r->response != AVC_RESPONSE_ACCEPTED) {
 		dev_err(fdtv->device,
 			"CA PMT failed with response 0x%x\n", r->response);
-		ret = -EFAULT;
+		ret = -EACCES;
 	}
 out:
 	mutex_unlock(&fdtv->avc_mutex);
diff --git a/drivers/media/dvb/firewire/firedtv-ci.c b/drivers/media/dvb/firewire/firedtv-ci.c
index 8ffb565..e5ebdbf 100644
--- a/drivers/media/dvb/firewire/firedtv-ci.c
+++ b/drivers/media/dvb/firewire/firedtv-ci.c
@@ -45,11 +45,6 @@ static int fdtv_get_ca_flags(struct firedtv_tuner_status *stat)
 	return flags;
 }
 
-static int fdtv_ca_reset(struct firedtv *fdtv)
-{
-	return avc_ca_reset(fdtv) ? -EFAULT : 0;
-}
-
 static int fdtv_ca_get_caps(void *arg)
 {
 	struct ca_caps *cap = arg;
@@ -65,12 +60,14 @@ static int fdtv_ca_get_slot_info(struct firedtv *fdtv, void *arg)
 {
 	struct firedtv_tuner_status stat;
 	struct ca_slot_info *slot = arg;
+	int err;
 
-	if (avc_tuner_status(fdtv, &stat))
-		return -EFAULT;
+	err = avc_tuner_status(fdtv, &stat);
+	if (err)
+		return err;
 
 	if (slot->num != 0)
-		return -EFAULT;
+		return -EACCES;
 
 	slot->type = CA_CI;
 	slot->flags = fdtv_get_ca_flags(&stat);
@@ -81,21 +78,21 @@ static int fdtv_ca_app_info(struct firedtv *fdtv, void *arg)
 {
 	struct ca_msg *reply = arg;
 
-	return avc_ca_app_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+	return avc_ca_app_info(fdtv, reply->msg, &reply->length);
 }
 
 static int fdtv_ca_info(struct firedtv *fdtv, void *arg)
 {
 	struct ca_msg *reply = arg;
 
-	return avc_ca_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+	return avc_ca_info(fdtv, reply->msg, &reply->length);
 }
 
 static int fdtv_ca_get_mmi(struct firedtv *fdtv, void *arg)
 {
 	struct ca_msg *reply = arg;
 
-	return avc_ca_get_mmi(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+	return avc_ca_get_mmi(fdtv, reply->msg, &reply->length);
 }
 
 static int fdtv_ca_get_msg(struct firedtv *fdtv, void *arg)
@@ -111,14 +108,15 @@ static int fdtv_ca_get_msg(struct firedtv *fdtv, void *arg)
 		err = fdtv_ca_info(fdtv, arg);
 		break;
 	default:
-		if (avc_tuner_status(fdtv, &stat))
-			err = -EFAULT;
-		else if (stat.ca_mmi == 1)
+		err = avc_tuner_status(fdtv, &stat);
+		if (err)
+			break;
+		if (stat.ca_mmi == 1)
 			err = fdtv_ca_get_mmi(fdtv, arg);
 		else {
 			dev_info(fdtv->device, "unhandled CA message 0x%08x\n",
 				 fdtv->ca_last_command);
-			err = -EFAULT;
+			err = -EACCES;
 		}
 	}
 	fdtv->ca_last_command = 0;
@@ -141,7 +139,7 @@ static int fdtv_ca_pmt(struct firedtv *fdtv, void *arg)
 		data_length = msg->msg[3];
 	}
 
-	return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length) ? -EFAULT : 0;
+	return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length);
 }
 
 static int fdtv_ca_send_msg(struct firedtv *fdtv, void *arg)
@@ -170,7 +168,7 @@ static int fdtv_ca_send_msg(struct firedtv *fdtv, void *arg)
 	default:
 		dev_err(fdtv->device, "unhandled CA message 0x%08x\n",
 			fdtv->ca_last_command);
-		err = -EFAULT;
+		err = -EACCES;
 	}
 	return err;
 }
@@ -184,7 +182,7 @@ static int fdtv_ca_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 	switch (cmd) {
 	case CA_RESET:
-		err = fdtv_ca_reset(fdtv);
+		err = avc_ca_reset(fdtv);
 		break;
 	case CA_GET_CAP:
 		err = fdtv_ca_get_caps(arg);
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 44b816f..32e08e3 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -49,6 +49,27 @@ config DVB_STV6110x
 	help
 	  A Silicon tuner that supports DVB-S and DVB-S2 modes
 
+comment "Multistandard (cable + terrestrial) frontends"
+	depends on DVB_CORE
+
+config DVB_DRXK
+	tristate "Micronas DRXK based"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  Micronas DRX-K DVB-C/T demodulator.
+
+	  Say Y when you want to support this frontend.
+
+config DVB_TDA18271C2DD
+	tristate "NXP TDA18271C2 silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  NXP TDA18271 silicon tuner.
+
+	  Say Y when you want to support this tuner.
+
 comment "DVB-S (satellite) frontends"
 	depends on DVB_CORE
 
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 2f3a6f7..6a6ba05 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -10,6 +10,7 @@ stv0900-objs = stv0900_core.o stv0900_sw.o
 au8522-objs = au8522_dig.o au8522_decoder.o
 drxd-objs = drxd_firm.o drxd_hard.o
 cxd2820r-objs = cxd2820r_core.o cxd2820r_c.o cxd2820r_t.o cxd2820r_t2.o
+drxk-objs := drxk_hard.o
 
 obj-$(CONFIG_DVB_PLL) += dvb-pll.o
 obj-$(CONFIG_DVB_STV0299) += stv0299.o
@@ -88,4 +89,6 @@ obj-$(CONFIG_DVB_MB86A20S) += mb86a20s.o
 obj-$(CONFIG_DVB_IX2505V) += ix2505v.o
 obj-$(CONFIG_DVB_STV0367) += stv0367.o
 obj-$(CONFIG_DVB_CXD2820R) += cxd2820r.o
+obj-$(CONFIG_DVB_DRXK) += drxk.o
+obj-$(CONFIG_DVB_TDA18271C2DD) += tda18271c2dd.o
 
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index b537891..2b248c1 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -692,7 +692,7 @@ static int au8522_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 	/* Interrogate the decoder to see if we are getting a real signal */
 	lock_status = au8522_readreg(state, 0x00);
 	if (lock_status == 0xa2)
-		vt->signal = 0x01;
+		vt->signal = 0xffff;
 	else
 		vt->signal = 0x00;
 
diff --git a/drivers/media/dvb/frontends/cx24113.c b/drivers/media/dvb/frontends/cx24113.c
index e9ee555..c341d57 100644
--- a/drivers/media/dvb/frontends/cx24113.c
+++ b/drivers/media/dvb/frontends/cx24113.c
@@ -31,8 +31,8 @@
 
 static int debug;
 
-#define info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0)
-#define err(args...)  do { printk(KERN_ERR  "CX24113: " args); } while (0)
+#define cx_info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0)
+#define cx_err(args...)  do { printk(KERN_ERR  "CX24113: " args); } while (0)
 
 #define dprintk(args...) \
 	do { \
@@ -341,7 +341,7 @@ static void cx24113_calc_pll_nf(struct cx24113_state *state, u16 *n, s32 *f)
 	} while (N < 6 && R < 3);
 
 	if (N < 6) {
-		err("strange frequency: N < 6\n");
+		cx_err("strange frequency: N < 6\n");
 		return;
 	}
 	F = freq_hz;
@@ -563,7 +563,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
 		kzalloc(sizeof(struct cx24113_state), GFP_KERNEL);
 	int rc;
 	if (state == NULL) {
-		err("Unable to kzalloc\n");
+		cx_err("Unable to kzalloc\n");
 		goto error;
 	}
 
@@ -571,7 +571,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
 	state->config = config;
 	state->i2c = i2c;
 
-	info("trying to detect myself\n");
+	cx_info("trying to detect myself\n");
 
 	/* making a dummy read, because of some expected troubles
 	 * after power on */
@@ -579,24 +579,24 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
 
 	rc = cx24113_readreg(state, 0x00);
 	if (rc < 0) {
-		info("CX24113 not found.\n");
+		cx_info("CX24113 not found.\n");
 		goto error;
 	}
 	state->rev = rc;
 
 	switch (rc) {
 	case 0x43:
-		info("detected CX24113 variant\n");
+		cx_info("detected CX24113 variant\n");
 		break;
 	case REV_CX24113:
-		info("successfully detected\n");
+		cx_info("successfully detected\n");
 		break;
 	default:
-		err("unsupported device id: %x\n", state->rev);
+		cx_err("unsupported device id: %x\n", state->rev);
 		goto error;
 	}
 	state->ver = cx24113_readreg(state, 0x01);
-	info("version: %x\n", state->ver);
+	cx_info("version: %x\n", state->ver);
 
 	/* create dvb_frontend */
 	memcpy(&fe->ops.tuner_ops, &cx24113_tuner_ops,
diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c
index 95c6465..ccd0525 100644
--- a/drivers/media/dvb/frontends/cx24116.c
+++ b/drivers/media/dvb/frontends/cx24116.c
@@ -1452,11 +1452,7 @@ tuned:  /* Set/Reset B/W */
 	cmd.args[0x00] = CMD_BANDWIDTH;
 	cmd.args[0x01] = 0x00;
 	cmd.len = 0x02;
-	ret = cx24116_cmd_execute(fe, &cmd);
-	if (ret != 0)
-		return ret;
-
-	return ret;
+	return cx24116_cmd_execute(fe, &cmd);
 }
 
 static int cx24116_tune(struct dvb_frontend *fe, struct dvb_frontend_parameters *params,
diff --git a/drivers/media/dvb/frontends/cxd2820r.h b/drivers/media/dvb/frontends/cxd2820r.h
index ad17845..2906582 100644
--- a/drivers/media/dvb/frontends/cxd2820r.h
+++ b/drivers/media/dvb/frontends/cxd2820r.h
@@ -55,13 +55,13 @@ struct cxd2820r_config {
 	 * Default: 0
 	 * Values: 0, 1
 	 */
-	int if_agc_polarity:1;
+	bool if_agc_polarity;
 
 	/* Spectrum inversion.
 	 * Default: 0
 	 * Values: 0, 1
 	 */
-	int spec_inv:1;
+	bool spec_inv;
 
 	/* IFs for all used modes.
 	 * Default: none, must set
diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c
index 0779f69..d416e85 100644
--- a/drivers/media/dvb/frontends/cxd2820r_core.c
+++ b/drivers/media/dvb/frontends/cxd2820r_core.c
@@ -314,6 +314,8 @@ static int cxd2820r_set_frontend(struct dvb_frontend *fe,
 			} else if (c->delivery_system == SYS_DVBT2) {
 				/* DVB-T => DVB-T2 */
 				ret = cxd2820r_sleep_t(fe);
+				if (ret)
+					break;
 				ret = cxd2820r_set_frontend_t2(fe, p);
 			}
 			break;
@@ -324,6 +326,8 @@ static int cxd2820r_set_frontend(struct dvb_frontend *fe,
 			} else if (c->delivery_system == SYS_DVBT) {
 				/* DVB-T2 => DVB-T */
 				ret = cxd2820r_sleep_t2(fe);
+				if (ret)
+					break;
 				ret = cxd2820r_set_frontend_t(fe, p);
 			}
 			break;
@@ -740,12 +744,13 @@ static int cxd2820r_tuner_i2c_xfer(struct i2c_adapter *i2c_adap,
 	struct i2c_msg msg[], int num)
 {
 	struct cxd2820r_priv *priv = i2c_get_adapdata(i2c_adap);
-	u8 obuf[msg[0].len + 2];
+	int ret;
+	u8 *obuf = kmalloc(msg[0].len + 2, GFP_KERNEL);
 	struct i2c_msg msg2[2] = {
 		{
 			.addr = priv->cfg.i2c_address,
 			.flags = 0,
-			.len = sizeof(obuf),
+			.len = msg[0].len + 2,
 			.buf = obuf,
 		}, {
 			.addr = priv->cfg.i2c_address,
@@ -755,15 +760,24 @@ static int cxd2820r_tuner_i2c_xfer(struct i2c_adapter *i2c_adap,
 		}
 	};
 
+	if (!obuf)
+		return -ENOMEM;
+
 	obuf[0] = 0x09;
 	obuf[1] = (msg[0].addr << 1);
 	if (num == 2) { /* I2C read */
 		obuf[1] = (msg[0].addr << 1) | I2C_M_RD; /* I2C RD flag */
-		msg2[0].len = sizeof(obuf) - 1; /* maybe HW bug ? */
+		msg2[0].len = msg[0].len + 2 - 1; /* '-1' maybe HW bug ? */
 	}
 	memcpy(&obuf[2], msg[0].buf, msg[0].len);
 
-	return i2c_transfer(priv->i2c, msg2, num);
+	ret = i2c_transfer(priv->i2c, msg2, num);
+	if (ret < 0)
+		warn("tuner i2c failed ret:%d", ret);
+
+	kfree(obuf);
+
+	return ret;
 }
 
 static struct i2c_algorithm cxd2820r_tuner_i2c_algo = {
diff --git a/drivers/media/dvb/frontends/cxd2820r_priv.h b/drivers/media/dvb/frontends/cxd2820r_priv.h
index 25adbee..0c0ebc9 100644
--- a/drivers/media/dvb/frontends/cxd2820r_priv.h
+++ b/drivers/media/dvb/frontends/cxd2820r_priv.h
@@ -55,13 +55,13 @@ struct cxd2820r_priv {
 	struct mutex fe_lock; /* FE lock */
 	int active_fe:2; /* FE lock, -1=NONE, 0=DVB-T/T2, 1=DVB-C */
 
-	int ber_running:1;
+	bool ber_running;
 
 	u8 bank[2];
 	u8 gpio[3];
 
 	fe_delivery_system_t delivery_system;
-	int last_tune_failed:1; /* for switch between T and T2 tune */
+	bool last_tune_failed; /* for switch between T and T2 tune */
 };
 
 /* cxd2820r_core.c */
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 0c9f40c..a64a538 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -2336,6 +2336,11 @@ struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr,
 		request_firmware() will hit an OOPS (this should be moved somewhere
 		more common) */
 
+	/* FIXME: make sure the dev.parent field is initialized, or else
+	   request_firmware() will hit an OOPS (this should be moved somewhere
+	   more common) */
+	st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent;
+
 	dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr);
 
 	/* init 7090 tuner adapter */
diff --git a/drivers/media/dvb/frontends/drxd_hard.c b/drivers/media/dvb/frontends/drxd_hard.c
index ea4c1c3..2238bf0 100644
--- a/drivers/media/dvb/frontends/drxd_hard.c
+++ b/drivers/media/dvb/frontends/drxd_hard.c
@@ -28,7 +28,6 @@
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
-#include <linux/version.h>
 #include <asm/div64.h>
 
 #include "dvb_frontend.h"
@@ -233,7 +232,7 @@ static int i2c_read(struct i2c_adapter *adap,
 	return 0;
 }
 
-inline u32 MulDiv32(u32 a, u32 b, u32 c)
+static inline u32 MulDiv32(u32 a, u32 b, u32 c)
 {
 	u64 tmp64;
 
@@ -910,14 +909,16 @@ static int load_firmware(struct drxd_state *state, const char *fw_name)
 		return -EIO;
 	}
 
-	state->microcode = kzalloc(fw->size, GFP_KERNEL);
+	state->microcode = kmalloc(fw->size, GFP_KERNEL);
 	if (state->microcode == NULL) {
-		printk(KERN_ERR "drxd: firmware load failure: nomemory\n");
+		release_firmware(fw);
+		printk(KERN_ERR "drxd: firmware load failure: no memory\n");
 		return -ENOMEM;
 	}
 
 	memcpy(state->microcode, fw->data, fw->size);
 	state->microcode_length = fw->size;
+	release_firmware(fw);
 	return 0;
 }
 
diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h
new file mode 100644
index 0000000..58baf41
--- /dev/null
+++ b/drivers/media/dvb/frontends/drxk.h
@@ -0,0 +1,47 @@
+#ifndef _DRXK_H_
+#define _DRXK_H_
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/**
+ * struct drxk_config - Configure the initial parameters for DRX-K
+ *
+ * adr:			I2C Address of the DRX-K
+ * single_master:	Device is on the single master mode
+ * no_i2c_bridge:	Don't switch the I2C bridge to talk with tuner
+ * antenna_gpio:	GPIO bit used to control the antenna
+ * antenna_dvbt:	GPIO bit for changing antenna to DVB-C. A value of 1
+ *			means that 1=DVBC, 0 = DVBT. Zero means the opposite.
+ * microcode_name:	Name of the firmware file with the microcode
+ *
+ * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
+ * UIO-3.
+ */
+struct drxk_config {
+	u8	adr;
+	bool	single_master;
+	bool	no_i2c_bridge;
+
+	bool	antenna_dvbt;
+	u16	antenna_gpio;
+
+	const char *microcode_name;
+};
+
+#if defined(CONFIG_DVB_DRXK) || (defined(CONFIG_DVB_DRXK_MODULE) \
+        && defined(MODULE))
+extern struct dvb_frontend *drxk_attach(const struct drxk_config *config,
+					struct i2c_adapter *i2c,
+					struct dvb_frontend **fe_t);
+#else
+static inline struct dvb_frontend *drxk_attach(const struct drxk_config *config,
+					struct i2c_adapter *i2c,
+					struct dvb_frontend **fe_t)
+{
+        printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+        return NULL;
+}
+#endif
+
+#endif
diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c
new file mode 100644
index 0000000..41b0838
--- /dev/null
+++ b/drivers/media/dvb/frontends/drxk_hard.c
@@ -0,0 +1,6454 @@
+/*
+ * drxk_hard: DRX-K DVB-C/T demodulator driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/version.h>
+#include <asm/div64.h>
+
+#include "dvb_frontend.h"
+#include "drxk.h"
+#include "drxk_hard.h"
+
+static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode);
+static int PowerDownQAM(struct drxk_state *state);
+static int SetDVBTStandard(struct drxk_state *state,
+			   enum OperationMode oMode);
+static int SetQAMStandard(struct drxk_state *state,
+			  enum OperationMode oMode);
+static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz,
+		  s32 tunerFreqOffset);
+static int SetDVBTStandard(struct drxk_state *state,
+			   enum OperationMode oMode);
+static int DVBTStart(struct drxk_state *state);
+static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz,
+		   s32 tunerFreqOffset);
+static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus);
+static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus);
+static int SwitchAntennaToQAM(struct drxk_state *state);
+static int SwitchAntennaToDVBT(struct drxk_state *state);
+
+static bool IsDVBT(struct drxk_state *state)
+{
+	return state->m_OperationMode == OM_DVBT;
+}
+
+static bool IsQAM(struct drxk_state *state)
+{
+	return state->m_OperationMode == OM_QAM_ITU_A ||
+	    state->m_OperationMode == OM_QAM_ITU_B ||
+	    state->m_OperationMode == OM_QAM_ITU_C;
+}
+
+bool IsA1WithPatchCode(struct drxk_state *state)
+{
+	return state->m_DRXK_A1_PATCH_CODE;
+}
+
+bool IsA1WithRomCode(struct drxk_state *state)
+{
+	return state->m_DRXK_A1_ROM_CODE;
+}
+
+#define NOA1ROM 0
+
+#define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0)
+#define DRXDAP_FASI_LONG_FORMAT(addr)  (((addr) & 0xFC30FF80) != 0)
+
+#define DEFAULT_MER_83  165
+#define DEFAULT_MER_93  250
+
+#ifndef DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH
+#define DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH (0x02)
+#endif
+
+#ifndef DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH
+#define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03)
+#endif
+
+#ifndef DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH
+#define DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH (0x06)
+#endif
+
+#define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700
+#define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500
+
+#ifndef DRXK_KI_RAGC_ATV
+#define DRXK_KI_RAGC_ATV   4
+#endif
+#ifndef DRXK_KI_IAGC_ATV
+#define DRXK_KI_IAGC_ATV   6
+#endif
+#ifndef DRXK_KI_DAGC_ATV
+#define DRXK_KI_DAGC_ATV   7
+#endif
+
+#ifndef DRXK_KI_RAGC_QAM
+#define DRXK_KI_RAGC_QAM   3
+#endif
+#ifndef DRXK_KI_IAGC_QAM
+#define DRXK_KI_IAGC_QAM   4
+#endif
+#ifndef DRXK_KI_DAGC_QAM
+#define DRXK_KI_DAGC_QAM   7
+#endif
+#ifndef DRXK_KI_RAGC_DVBT
+#define DRXK_KI_RAGC_DVBT  (IsA1WithPatchCode(state) ? 3 : 2)
+#endif
+#ifndef DRXK_KI_IAGC_DVBT
+#define DRXK_KI_IAGC_DVBT  (IsA1WithPatchCode(state) ? 4 : 2)
+#endif
+#ifndef DRXK_KI_DAGC_DVBT
+#define DRXK_KI_DAGC_DVBT  (IsA1WithPatchCode(state) ? 10 : 7)
+#endif
+
+#ifndef DRXK_AGC_DAC_OFFSET
+#define DRXK_AGC_DAC_OFFSET (0x800)
+#endif
+
+#ifndef DRXK_BANDWIDTH_8MHZ_IN_HZ
+#define DRXK_BANDWIDTH_8MHZ_IN_HZ  (0x8B8249L)
+#endif
+
+#ifndef DRXK_BANDWIDTH_7MHZ_IN_HZ
+#define DRXK_BANDWIDTH_7MHZ_IN_HZ  (0x7A1200L)
+#endif
+
+#ifndef DRXK_BANDWIDTH_6MHZ_IN_HZ
+#define DRXK_BANDWIDTH_6MHZ_IN_HZ  (0x68A1B6L)
+#endif
+
+#ifndef DRXK_QAM_SYMBOLRATE_MAX
+#define DRXK_QAM_SYMBOLRATE_MAX         (7233000)
+#endif
+
+#define DRXK_BL_ROM_OFFSET_TAPS_DVBT    56
+#define DRXK_BL_ROM_OFFSET_TAPS_ITU_A   64
+#define DRXK_BL_ROM_OFFSET_TAPS_ITU_C   0x5FE0
+#define DRXK_BL_ROM_OFFSET_TAPS_BG      24
+#define DRXK_BL_ROM_OFFSET_TAPS_DKILLP  32
+#define DRXK_BL_ROM_OFFSET_TAPS_NTSC    40
+#define DRXK_BL_ROM_OFFSET_TAPS_FM      48
+#define DRXK_BL_ROM_OFFSET_UCODE        0
+
+#define DRXK_BLC_TIMEOUT                100
+
+#define DRXK_BLCC_NR_ELEMENTS_TAPS      2
+#define DRXK_BLCC_NR_ELEMENTS_UCODE     6
+
+#define DRXK_BLDC_NR_ELEMENTS_TAPS      28
+
+#ifndef DRXK_OFDM_NE_NOTCH_WIDTH
+#define DRXK_OFDM_NE_NOTCH_WIDTH             (4)
+#endif
+
+#define DRXK_QAM_SL_SIG_POWER_QAM16       (40960)
+#define DRXK_QAM_SL_SIG_POWER_QAM32       (20480)
+#define DRXK_QAM_SL_SIG_POWER_QAM64       (43008)
+#define DRXK_QAM_SL_SIG_POWER_QAM128      (20992)
+#define DRXK_QAM_SL_SIG_POWER_QAM256      (43520)
+
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages");
+
+#define dprintk(level, fmt, arg...) do {			\
+if (debug >= level)						\
+	printk(KERN_DEBUG "drxk: %s" fmt, __func__, ## arg);	\
+} while (0)
+
+
+static inline u32 MulDiv32(u32 a, u32 b, u32 c)
+{
+	u64 tmp64;
+
+	tmp64 = (u64) a * (u64) b;
+	do_div(tmp64, c);
+
+	return (u32) tmp64;
+}
+
+inline u32 Frac28a(u32 a, u32 c)
+{
+	int i = 0;
+	u32 Q1 = 0;
+	u32 R0 = 0;
+
+	R0 = (a % c) << 4;	/* 32-28 == 4 shifts possible at max */
+	Q1 = a / c;		/* integer part, only the 4 least significant bits
+				   will be visible in the result */
+
+	/* division using radix 16, 7 nibbles in the result */
+	for (i = 0; i < 7; i++) {
+		Q1 = (Q1 << 4) | (R0 / c);
+		R0 = (R0 % c) << 4;
+	}
+	/* rounding */
+	if ((R0 >> 3) >= c)
+		Q1++;
+
+	return Q1;
+}
+
+static u32 Log10Times100(u32 x)
+{
+	static const u8 scale = 15;
+	static const u8 indexWidth = 5;
+	u8 i = 0;
+	u32 y = 0;
+	u32 d = 0;
+	u32 k = 0;
+	u32 r = 0;
+	/*
+	   log2lut[n] = (1<<scale) * 200 * log2(1.0 + ((1.0/(1<<INDEXWIDTH)) * n))
+	   0 <= n < ((1<<INDEXWIDTH)+1)
+	 */
+
+	static const u32 log2lut[] = {
+		0,		/* 0.000000 */
+		290941,		/* 290941.300628 */
+		573196,		/* 573196.476418 */
+		847269,		/* 847269.179851 */
+		1113620,	/* 1113620.489452 */
+		1372674,	/* 1372673.576986 */
+		1624818,	/* 1624817.752104 */
+		1870412,	/* 1870411.981536 */
+		2109788,	/* 2109787.962654 */
+		2343253,	/* 2343252.817465 */
+		2571091,	/* 2571091.461923 */
+		2793569,	/* 2793568.696416 */
+		3010931,	/* 3010931.055901 */
+		3223408,	/* 3223408.452106 */
+		3431216,	/* 3431215.635215 */
+		3634553,	/* 3634553.498355 */
+		3833610,	/* 3833610.244726 */
+		4028562,	/* 4028562.434393 */
+		4219576,	/* 4219575.925308 */
+		4406807,	/* 4406806.721144 */
+		4590402,	/* 4590401.736809 */
+		4770499,	/* 4770499.491025 */
+		4947231,	/* 4947230.734179 */
+		5120719,	/* 5120719.018555 */
+		5291081,	/* 5291081.217197 */
+		5458428,	/* 5458427.996830 */
+		5622864,	/* 5622864.249668 */
+		5784489,	/* 5784489.488298 */
+		5943398,	/* 5943398.207380 */
+		6099680,	/* 6099680.215452 */
+		6253421,	/* 6253420.939751 */
+		6404702,	/* 6404701.706649 */
+		6553600,	/* 6553600.000000 */
+	};
+
+
+	if (x == 0)
+		return 0;
+
+	/* Scale x (normalize) */
+	/* computing y in log(x/y) = log(x) - log(y) */
+	if ((x & ((0xffffffff) << (scale + 1))) == 0) {
+		for (k = scale; k > 0; k--) {
+			if (x & (((u32) 1) << scale))
+				break;
+			x <<= 1;
+		}
+	} else {
+		for (k = scale; k < 31; k++) {
+			if ((x & (((u32) (-1)) << (scale + 1))) == 0)
+				break;
+			x >>= 1;
+		}
+	}
+	/*
+	   Now x has binary point between bit[scale] and bit[scale-1]
+	   and 1.0 <= x < 2.0 */
+
+	/* correction for divison: log(x) = log(x/y)+log(y) */
+	y = k * ((((u32) 1) << scale) * 200);
+
+	/* remove integer part */
+	x &= ((((u32) 1) << scale) - 1);
+	/* get index */
+	i = (u8) (x >> (scale - indexWidth));
+	/* compute delta (x - a) */
+	d = x & ((((u32) 1) << (scale - indexWidth)) - 1);
+	/* compute log, multiplication (d* (..)) must be within range ! */
+	y += log2lut[i] +
+	    ((d * (log2lut[i + 1] - log2lut[i])) >> (scale - indexWidth));
+	/* Conver to log10() */
+	y /= 108853;		/* (log2(10) << scale) */
+	r = (y >> 1);
+	/* rounding */
+	if (y & ((u32) 1))
+		r++;
+	return r;
+}
+
+/****************************************************************************/
+/* I2C **********************************************************************/
+/****************************************************************************/
+
+static int i2c_read1(struct i2c_adapter *adapter, u8 adr, u8 *val)
+{
+	struct i2c_msg msgs[1] = { {.addr = adr, .flags = I2C_M_RD,
+				    .buf = val, .len = 1}
+	};
+
+	return i2c_transfer(adapter, msgs, 1);
+}
+
+static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 *data, int len)
+{
+	int status;
+	struct i2c_msg msg = {
+	    .addr = adr, .flags = 0, .buf = data, .len = len };
+
+	dprintk(3, ":");
+	if (debug > 2) {
+		int i;
+		for (i = 0; i < len; i++)
+			printk(KERN_CONT " %02x", data[i]);
+		printk(KERN_CONT "\n");
+	}
+	status = i2c_transfer(adap, &msg, 1);
+	if (status >= 0 && status != 1)
+		status = -EIO;
+
+	if (status < 0)
+		printk(KERN_ERR "drxk: i2c write error at addr 0x%02x\n", adr);
+
+	return status;
+}
+
+static int i2c_read(struct i2c_adapter *adap,
+		    u8 adr, u8 *msg, int len, u8 *answ, int alen)
+{
+	int status;
+	struct i2c_msg msgs[2] = {
+		{.addr = adr, .flags = 0,
+				    .buf = msg, .len = len},
+		{.addr = adr, .flags = I2C_M_RD,
+		 .buf = answ, .len = alen}
+	};
+
+	status = i2c_transfer(adap, msgs, 2);
+	if (status != 2) {
+		if (debug > 2)
+			printk(KERN_CONT ": ERROR!\n");
+		if (status >= 0)
+			status = -EIO;
+
+		printk(KERN_ERR "drxk: i2c read error at addr 0x%02x\n", adr);
+		return status;
+	}
+	if (debug > 2) {
+		int i;
+		dprintk(2, ": read from ");
+		for (i = 0; i < len; i++)
+			printk(KERN_CONT " %02x", msg[i]);
+		printk(KERN_CONT "Value = ");
+		for (i = 0; i < alen; i++)
+			printk(KERN_CONT " %02x", answ[i]);
+		printk(KERN_CONT "\n");
+	}
+	return 0;
+}
+
+static int read16_flags(struct drxk_state *state, u32 reg, u16 *data, u8 flags)
+{
+	int status;
+	u8 adr = state->demod_address, mm1[4], mm2[2], len;
+
+	if (state->single_master)
+		flags |= 0xC0;
+
+	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
+		mm1[0] = (((reg << 1) & 0xFF) | 0x01);
+		mm1[1] = ((reg >> 16) & 0xFF);
+		mm1[2] = ((reg >> 24) & 0xFF) | flags;
+		mm1[3] = ((reg >> 7) & 0xFF);
+		len = 4;
+	} else {
+		mm1[0] = ((reg << 1) & 0xFF);
+		mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
+		len = 2;
+	}
+	dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags);
+	status = i2c_read(state->i2c, adr, mm1, len, mm2, 2);
+	if (status < 0)
+		return status;
+	if (data)
+		*data = mm2[0] | (mm2[1] << 8);
+
+	return 0;
+}
+
+static int read16(struct drxk_state *state, u32 reg, u16 *data)
+{
+	return read16_flags(state, reg, data, 0);
+}
+
+static int read32_flags(struct drxk_state *state, u32 reg, u32 *data, u8 flags)
+{
+	int status;
+	u8 adr = state->demod_address, mm1[4], mm2[4], len;
+
+	if (state->single_master)
+		flags |= 0xC0;
+
+	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
+		mm1[0] = (((reg << 1) & 0xFF) | 0x01);
+		mm1[1] = ((reg >> 16) & 0xFF);
+		mm1[2] = ((reg >> 24) & 0xFF) | flags;
+		mm1[3] = ((reg >> 7) & 0xFF);
+		len = 4;
+	} else {
+		mm1[0] = ((reg << 1) & 0xFF);
+		mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
+		len = 2;
+	}
+	dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags);
+	status = i2c_read(state->i2c, adr, mm1, len, mm2, 4);
+	if (status < 0)
+		return status;
+	if (data)
+		*data = mm2[0] | (mm2[1] << 8) |
+		    (mm2[2] << 16) | (mm2[3] << 24);
+
+	return 0;
+}
+
+static int read32(struct drxk_state *state, u32 reg, u32 *data)
+{
+	return read32_flags(state, reg, data, 0);
+}
+
+static int write16_flags(struct drxk_state *state, u32 reg, u16 data, u8 flags)
+{
+	u8 adr = state->demod_address, mm[6], len;
+
+	if (state->single_master)
+		flags |= 0xC0;
+	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
+		mm[0] = (((reg << 1) & 0xFF) | 0x01);
+		mm[1] = ((reg >> 16) & 0xFF);
+		mm[2] = ((reg >> 24) & 0xFF) | flags;
+		mm[3] = ((reg >> 7) & 0xFF);
+		len = 4;
+	} else {
+		mm[0] = ((reg << 1) & 0xFF);
+		mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
+		len = 2;
+	}
+	mm[len] = data & 0xff;
+	mm[len + 1] = (data >> 8) & 0xff;
+
+	dprintk(2, "(0x%08x, 0x%04x, 0x%02x)\n", reg, data, flags);
+	return i2c_write(state->i2c, adr, mm, len + 2);
+}
+
+static int write16(struct drxk_state *state, u32 reg, u16 data)
+{
+	return write16_flags(state, reg, data, 0);
+}
+
+static int write32_flags(struct drxk_state *state, u32 reg, u32 data, u8 flags)
+{
+	u8 adr = state->demod_address, mm[8], len;
+
+	if (state->single_master)
+		flags |= 0xC0;
+	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
+		mm[0] = (((reg << 1) & 0xFF) | 0x01);
+		mm[1] = ((reg >> 16) & 0xFF);
+		mm[2] = ((reg >> 24) & 0xFF) | flags;
+		mm[3] = ((reg >> 7) & 0xFF);
+		len = 4;
+	} else {
+		mm[0] = ((reg << 1) & 0xFF);
+		mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
+		len = 2;
+	}
+	mm[len] = data & 0xff;
+	mm[len + 1] = (data >> 8) & 0xff;
+	mm[len + 2] = (data >> 16) & 0xff;
+	mm[len + 3] = (data >> 24) & 0xff;
+	dprintk(2, "(0x%08x, 0x%08x, 0x%02x)\n", reg, data, flags);
+
+	return i2c_write(state->i2c, adr, mm, len + 4);
+}
+
+static int write32(struct drxk_state *state, u32 reg, u32 data)
+{
+	return write32_flags(state, reg, data, 0);
+}
+
+static int write_block(struct drxk_state *state, u32 Address,
+		      const int BlockSize, const u8 pBlock[])
+{
+	int status = 0, BlkSize = BlockSize;
+	u8 Flags = 0;
+
+	if (state->single_master)
+		Flags |= 0xC0;
+
+	while (BlkSize > 0) {
+		int Chunk = BlkSize > state->m_ChunkSize ?
+		    state->m_ChunkSize : BlkSize;
+		u8 *AdrBuf = &state->Chunk[0];
+		u32 AdrLength = 0;
+
+		if (DRXDAP_FASI_LONG_FORMAT(Address) || (Flags != 0)) {
+			AdrBuf[0] = (((Address << 1) & 0xFF) | 0x01);
+			AdrBuf[1] = ((Address >> 16) & 0xFF);
+			AdrBuf[2] = ((Address >> 24) & 0xFF);
+			AdrBuf[3] = ((Address >> 7) & 0xFF);
+			AdrBuf[2] |= Flags;
+			AdrLength = 4;
+			if (Chunk == state->m_ChunkSize)
+				Chunk -= 2;
+		} else {
+			AdrBuf[0] = ((Address << 1) & 0xFF);
+			AdrBuf[1] = (((Address >> 16) & 0x0F) |
+				     ((Address >> 18) & 0xF0));
+			AdrLength = 2;
+		}
+		memcpy(&state->Chunk[AdrLength], pBlock, Chunk);
+		dprintk(2, "(0x%08x, 0x%02x)\n", Address, Flags);
+		if (debug > 1) {
+			int i;
+			if (pBlock)
+				for (i = 0; i < Chunk; i++)
+					printk(KERN_CONT " %02x", pBlock[i]);
+			printk(KERN_CONT "\n");
+		}
+		status = i2c_write(state->i2c, state->demod_address,
+				   &state->Chunk[0], Chunk + AdrLength);
+		if (status < 0) {
+			printk(KERN_ERR "drxk: %s: i2c write error at addr 0x%02x\n",
+			       __func__, Address);
+			break;
+		}
+		pBlock += Chunk;
+		Address += (Chunk >> 1);
+		BlkSize -= Chunk;
+	}
+	return status;
+}
+
+#ifndef DRXK_MAX_RETRIES_POWERUP
+#define DRXK_MAX_RETRIES_POWERUP 20
+#endif
+
+int PowerUpDevice(struct drxk_state *state)
+{
+	int status;
+	u8 data = 0;
+	u16 retryCount = 0;
+
+	dprintk(1, "\n");
+
+	status = i2c_read1(state->i2c, state->demod_address, &data);
+	if (status < 0) {
+		do {
+			data = 0;
+			status = i2c_write(state->i2c, state->demod_address,
+					   &data, 1);
+			msleep(10);
+			retryCount++;
+			if (status < 0)
+				continue;
+			status = i2c_read1(state->i2c, state->demod_address,
+					   &data);
+		} while (status < 0 &&
+			 (retryCount < DRXK_MAX_RETRIES_POWERUP));
+		if (status < 0 && retryCount >= DRXK_MAX_RETRIES_POWERUP)
+			goto error;
+	}
+
+	/* Make sure all clk domains are active */
+	status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_NONE);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
+	if (status < 0)
+		goto error;
+	/* Enable pll lock tests */
+	status = write16(state, SIO_CC_PLL_LOCK__A, 1);
+	if (status < 0)
+		goto error;
+
+	state->m_currentPowerMode = DRX_POWER_UP;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+
+static int init_state(struct drxk_state *state)
+{
+	/*
+	 * FIXME: most (all?) of the values bellow should be moved into
+	 * struct drxk_config, as they are probably board-specific
+	 */
+	u32 ulVSBIfAgcMode = DRXK_AGC_CTRL_AUTO;
+	u32 ulVSBIfAgcOutputLevel = 0;
+	u32 ulVSBIfAgcMinLevel = 0;
+	u32 ulVSBIfAgcMaxLevel = 0x7FFF;
+	u32 ulVSBIfAgcSpeed = 3;
+
+	u32 ulVSBRfAgcMode = DRXK_AGC_CTRL_AUTO;
+	u32 ulVSBRfAgcOutputLevel = 0;
+	u32 ulVSBRfAgcMinLevel = 0;
+	u32 ulVSBRfAgcMaxLevel = 0x7FFF;
+	u32 ulVSBRfAgcSpeed = 3;
+	u32 ulVSBRfAgcTop = 9500;
+	u32 ulVSBRfAgcCutOffCurrent = 4000;
+
+	u32 ulATVIfAgcMode = DRXK_AGC_CTRL_AUTO;
+	u32 ulATVIfAgcOutputLevel = 0;
+	u32 ulATVIfAgcMinLevel = 0;
+	u32 ulATVIfAgcMaxLevel = 0;
+	u32 ulATVIfAgcSpeed = 3;
+
+	u32 ulATVRfAgcMode = DRXK_AGC_CTRL_OFF;
+	u32 ulATVRfAgcOutputLevel = 0;
+	u32 ulATVRfAgcMinLevel = 0;
+	u32 ulATVRfAgcMaxLevel = 0;
+	u32 ulATVRfAgcTop = 9500;
+	u32 ulATVRfAgcCutOffCurrent = 4000;
+	u32 ulATVRfAgcSpeed = 3;
+
+	u32 ulQual83 = DEFAULT_MER_83;
+	u32 ulQual93 = DEFAULT_MER_93;
+
+	u32 ulDVBTStaticTSClock = 1;
+	u32 ulDVBCStaticTSClock = 1;
+
+	u32 ulMpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
+	u32 ulDemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
+
+	/* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */
+	/* io_pad_cfg_mode output mode is drive always */
+	/* io_pad_cfg_drive is set to power 2 (23 mA) */
+	u32 ulGPIOCfg = 0x0113;
+	u32 ulSerialMode = 1;
+	u32 ulInvertTSClock = 0;
+	u32 ulTSDataStrength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH;
+	u32 ulTSClockkStrength = DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH;
+	u32 ulDVBTBitrate = 50000000;
+	u32 ulDVBCBitrate = DRXK_QAM_SYMBOLRATE_MAX * 8;
+
+	u32 ulInsertRSByte = 0;
+
+	u32 ulRfMirror = 1;
+	u32 ulPowerDown = 0;
+
+	dprintk(1, "\n");
+
+	state->m_hasLNA = false;
+	state->m_hasDVBT = false;
+	state->m_hasDVBC = false;
+	state->m_hasATV = false;
+	state->m_hasOOB = false;
+	state->m_hasAudio = false;
+
+	state->m_ChunkSize = 124;
+
+	state->m_oscClockFreq = 0;
+	state->m_smartAntInverted = false;
+	state->m_bPDownOpenBridge = false;
+
+	/* real system clock frequency in kHz */
+	state->m_sysClockFreq = 151875;
+	/* Timing div, 250ns/Psys */
+	/* Timing div, = (delay (nano seconds) * sysclk (kHz))/ 1000 */
+	state->m_HICfgTimingDiv = ((state->m_sysClockFreq / 1000) *
+				   HI_I2C_DELAY) / 1000;
+	/* Clipping */
+	if (state->m_HICfgTimingDiv > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M)
+		state->m_HICfgTimingDiv = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M;
+	state->m_HICfgWakeUpKey = (state->demod_address << 1);
+	/* port/bridge/power down ctrl */
+	state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE;
+
+	state->m_bPowerDown = (ulPowerDown != 0);
+
+	state->m_DRXK_A1_PATCH_CODE = false;
+	state->m_DRXK_A1_ROM_CODE = false;
+	state->m_DRXK_A2_ROM_CODE = false;
+	state->m_DRXK_A3_ROM_CODE = false;
+	state->m_DRXK_A2_PATCH_CODE = false;
+	state->m_DRXK_A3_PATCH_CODE = false;
+
+	/* Init AGC and PGA parameters */
+	/* VSB IF */
+	state->m_vsbIfAgcCfg.ctrlMode = (ulVSBIfAgcMode);
+	state->m_vsbIfAgcCfg.outputLevel = (ulVSBIfAgcOutputLevel);
+	state->m_vsbIfAgcCfg.minOutputLevel = (ulVSBIfAgcMinLevel);
+	state->m_vsbIfAgcCfg.maxOutputLevel = (ulVSBIfAgcMaxLevel);
+	state->m_vsbIfAgcCfg.speed = (ulVSBIfAgcSpeed);
+	state->m_vsbPgaCfg = 140;
+
+	/* VSB RF */
+	state->m_vsbRfAgcCfg.ctrlMode = (ulVSBRfAgcMode);
+	state->m_vsbRfAgcCfg.outputLevel = (ulVSBRfAgcOutputLevel);
+	state->m_vsbRfAgcCfg.minOutputLevel = (ulVSBRfAgcMinLevel);
+	state->m_vsbRfAgcCfg.maxOutputLevel = (ulVSBRfAgcMaxLevel);
+	state->m_vsbRfAgcCfg.speed = (ulVSBRfAgcSpeed);
+	state->m_vsbRfAgcCfg.top = (ulVSBRfAgcTop);
+	state->m_vsbRfAgcCfg.cutOffCurrent = (ulVSBRfAgcCutOffCurrent);
+	state->m_vsbPreSawCfg.reference = 0x07;
+	state->m_vsbPreSawCfg.usePreSaw = true;
+
+	state->m_Quality83percent = DEFAULT_MER_83;
+	state->m_Quality93percent = DEFAULT_MER_93;
+	if (ulQual93 <= 500 && ulQual83 < ulQual93) {
+		state->m_Quality83percent = ulQual83;
+		state->m_Quality93percent = ulQual93;
+	}
+
+	/* ATV IF */
+	state->m_atvIfAgcCfg.ctrlMode = (ulATVIfAgcMode);
+	state->m_atvIfAgcCfg.outputLevel = (ulATVIfAgcOutputLevel);
+	state->m_atvIfAgcCfg.minOutputLevel = (ulATVIfAgcMinLevel);
+	state->m_atvIfAgcCfg.maxOutputLevel = (ulATVIfAgcMaxLevel);
+	state->m_atvIfAgcCfg.speed = (ulATVIfAgcSpeed);
+
+	/* ATV RF */
+	state->m_atvRfAgcCfg.ctrlMode = (ulATVRfAgcMode);
+	state->m_atvRfAgcCfg.outputLevel = (ulATVRfAgcOutputLevel);
+	state->m_atvRfAgcCfg.minOutputLevel = (ulATVRfAgcMinLevel);
+	state->m_atvRfAgcCfg.maxOutputLevel = (ulATVRfAgcMaxLevel);
+	state->m_atvRfAgcCfg.speed = (ulATVRfAgcSpeed);
+	state->m_atvRfAgcCfg.top = (ulATVRfAgcTop);
+	state->m_atvRfAgcCfg.cutOffCurrent = (ulATVRfAgcCutOffCurrent);
+	state->m_atvPreSawCfg.reference = 0x04;
+	state->m_atvPreSawCfg.usePreSaw = true;
+
+
+	/* DVBT RF */
+	state->m_dvbtRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF;
+	state->m_dvbtRfAgcCfg.outputLevel = 0;
+	state->m_dvbtRfAgcCfg.minOutputLevel = 0;
+	state->m_dvbtRfAgcCfg.maxOutputLevel = 0xFFFF;
+	state->m_dvbtRfAgcCfg.top = 0x2100;
+	state->m_dvbtRfAgcCfg.cutOffCurrent = 4000;
+	state->m_dvbtRfAgcCfg.speed = 1;
+
+
+	/* DVBT IF */
+	state->m_dvbtIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO;
+	state->m_dvbtIfAgcCfg.outputLevel = 0;
+	state->m_dvbtIfAgcCfg.minOutputLevel = 0;
+	state->m_dvbtIfAgcCfg.maxOutputLevel = 9000;
+	state->m_dvbtIfAgcCfg.top = 13424;
+	state->m_dvbtIfAgcCfg.cutOffCurrent = 0;
+	state->m_dvbtIfAgcCfg.speed = 3;
+	state->m_dvbtIfAgcCfg.FastClipCtrlDelay = 30;
+	state->m_dvbtIfAgcCfg.IngainTgtMax = 30000;
+	/* state->m_dvbtPgaCfg = 140; */
+
+	state->m_dvbtPreSawCfg.reference = 4;
+	state->m_dvbtPreSawCfg.usePreSaw = false;
+
+	/* QAM RF */
+	state->m_qamRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF;
+	state->m_qamRfAgcCfg.outputLevel = 0;
+	state->m_qamRfAgcCfg.minOutputLevel = 6023;
+	state->m_qamRfAgcCfg.maxOutputLevel = 27000;
+	state->m_qamRfAgcCfg.top = 0x2380;
+	state->m_qamRfAgcCfg.cutOffCurrent = 4000;
+	state->m_qamRfAgcCfg.speed = 3;
+
+	/* QAM IF */
+	state->m_qamIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO;
+	state->m_qamIfAgcCfg.outputLevel = 0;
+	state->m_qamIfAgcCfg.minOutputLevel = 0;
+	state->m_qamIfAgcCfg.maxOutputLevel = 9000;
+	state->m_qamIfAgcCfg.top = 0x0511;
+	state->m_qamIfAgcCfg.cutOffCurrent = 0;
+	state->m_qamIfAgcCfg.speed = 3;
+	state->m_qamIfAgcCfg.IngainTgtMax = 5119;
+	state->m_qamIfAgcCfg.FastClipCtrlDelay = 50;
+
+	state->m_qamPgaCfg = 140;
+	state->m_qamPreSawCfg.reference = 4;
+	state->m_qamPreSawCfg.usePreSaw = false;
+
+	state->m_OperationMode = OM_NONE;
+	state->m_DrxkState = DRXK_UNINITIALIZED;
+
+	/* MPEG output configuration */
+	state->m_enableMPEGOutput = true;	/* If TRUE; enable MPEG ouput */
+	state->m_insertRSByte = false;	/* If TRUE; insert RS byte */
+	state->m_enableParallel = true;	/* If TRUE;
+					   parallel out otherwise serial */
+	state->m_invertDATA = false;	/* If TRUE; invert DATA signals */
+	state->m_invertERR = false;	/* If TRUE; invert ERR signal */
+	state->m_invertSTR = false;	/* If TRUE; invert STR signals */
+	state->m_invertVAL = false;	/* If TRUE; invert VAL signals */
+	state->m_invertCLK = (ulInvertTSClock != 0);	/* If TRUE; invert CLK signals */
+	state->m_DVBTStaticCLK = (ulDVBTStaticTSClock != 0);
+	state->m_DVBCStaticCLK = (ulDVBCStaticTSClock != 0);
+	/* If TRUE; static MPEG clockrate will be used;
+	   otherwise clockrate will adapt to the bitrate of the TS */
+
+	state->m_DVBTBitrate = ulDVBTBitrate;
+	state->m_DVBCBitrate = ulDVBCBitrate;
+
+	state->m_TSDataStrength = (ulTSDataStrength & 0x07);
+	state->m_TSClockkStrength = (ulTSClockkStrength & 0x07);
+
+	/* Maximum bitrate in b/s in case static clockrate is selected */
+	state->m_mpegTsStaticBitrate = 19392658;
+	state->m_disableTEIhandling = false;
+
+	if (ulInsertRSByte)
+		state->m_insertRSByte = true;
+
+	state->m_MpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
+	if (ulMpegLockTimeOut < 10000)
+		state->m_MpegLockTimeOut = ulMpegLockTimeOut;
+	state->m_DemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
+	if (ulDemodLockTimeOut < 10000)
+		state->m_DemodLockTimeOut = ulDemodLockTimeOut;
+
+	/* QAM defaults */
+	state->m_Constellation = DRX_CONSTELLATION_AUTO;
+	state->m_qamInterleaveMode = DRXK_QAM_I12_J17;
+	state->m_fecRsPlen = 204 * 8;	/* fecRsPlen  annex A */
+	state->m_fecRsPrescale = 1;
+
+	state->m_sqiSpeed = DRXK_DVBT_SQI_SPEED_MEDIUM;
+	state->m_agcFastClipCtrlDelay = 0;
+
+	state->m_GPIOCfg = (ulGPIOCfg);
+
+	state->m_bPowerDown = false;
+	state->m_currentPowerMode = DRX_POWER_DOWN;
+
+	state->m_enableParallel = (ulSerialMode == 0);
+
+	state->m_rfmirror = (ulRfMirror == 0);
+	state->m_IfAgcPol = false;
+	return 0;
+}
+
+static int DRXX_Open(struct drxk_state *state)
+{
+	int status = 0;
+	u32 jtag = 0;
+	u16 bid = 0;
+	u16 key = 0;
+
+	dprintk(1, "\n");
+	/* stop lock indicator process */
+	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+	if (status < 0)
+		goto error;
+	/* Check device id */
+	status = read16(state, SIO_TOP_COMM_KEY__A, &key);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
+	if (status < 0)
+		goto error;
+	status = read32(state, SIO_TOP_JTAGID_LO__A, &jtag);
+	if (status < 0)
+		goto error;
+	status = read16(state, SIO_PDR_UIO_IN_HI__A, &bid);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_TOP_COMM_KEY__A, key);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int GetDeviceCapabilities(struct drxk_state *state)
+{
+	u16 sioPdrOhwCfg = 0;
+	u32 sioTopJtagidLo = 0;
+	int status;
+	const char *spin = "";
+
+	dprintk(1, "\n");
+
+	/* driver 0.9.0 */
+	/* stop lock indicator process */
+	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA);
+	if (status < 0)
+		goto error;
+	status = read16(state, SIO_PDR_OHW_CFG__A, &sioPdrOhwCfg);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
+	if (status < 0)
+		goto error;
+
+	switch ((sioPdrOhwCfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) {
+	case 0:
+		/* ignore (bypass ?) */
+		break;
+	case 1:
+		/* 27 MHz */
+		state->m_oscClockFreq = 27000;
+		break;
+	case 2:
+		/* 20.25 MHz */
+		state->m_oscClockFreq = 20250;
+		break;
+	case 3:
+		/* 4 MHz */
+		state->m_oscClockFreq = 20250;
+		break;
+	default:
+		printk(KERN_ERR "drxk: Clock Frequency is unkonwn\n");
+		return -EINVAL;
+	}
+	/*
+		Determine device capabilities
+		Based on pinning v14
+		*/
+	status = read32(state, SIO_TOP_JTAGID_LO__A, &sioTopJtagidLo);
+	if (status < 0)
+		goto error;
+	/* driver 0.9.0 */
+	switch ((sioTopJtagidLo >> 29) & 0xF) {
+	case 0:
+		state->m_deviceSpin = DRXK_SPIN_A1;
+		spin = "A1";
+		break;
+	case 2:
+		state->m_deviceSpin = DRXK_SPIN_A2;
+		spin = "A2";
+		break;
+	case 3:
+		state->m_deviceSpin = DRXK_SPIN_A3;
+		spin = "A3";
+		break;
+	default:
+		state->m_deviceSpin = DRXK_SPIN_UNKNOWN;
+		status = -EINVAL;
+		printk(KERN_ERR "drxk: Spin unknown\n");
+		goto error2;
+	}
+	switch ((sioTopJtagidLo >> 12) & 0xFF) {
+	case 0x13:
+		/* typeId = DRX3913K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = false;
+		state->m_hasAudio = false;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = true;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = false;
+		state->m_hasGPIO1 = false;
+		state->m_hasIRQN = false;
+		break;
+	case 0x15:
+		/* typeId = DRX3915K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = false;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = false;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x16:
+		/* typeId = DRX3916K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = false;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = false;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x18:
+		/* typeId = DRX3918K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = true;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = false;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x21:
+		/* typeId = DRX3921K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = true;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = true;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x23:
+		/* typeId = DRX3923K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = true;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = true;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x25:
+		/* typeId = DRX3925K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = true;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = true;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x26:
+		/* typeId = DRX3926K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = false;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = true;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	default:
+		printk(KERN_ERR "drxk: DeviceID 0x%02x not supported\n",
+			((sioTopJtagidLo >> 12) & 0xFF));
+		status = -EINVAL;
+		goto error2;
+	}
+
+	printk(KERN_INFO
+	       "drxk: detected a drx-39%02xk, spin %s, xtal %d.%03d MHz\n",
+	       ((sioTopJtagidLo >> 12) & 0xFF), spin,
+	       state->m_oscClockFreq / 1000,
+	       state->m_oscClockFreq % 1000);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+error2:
+	return status;
+}
+
+static int HI_Command(struct drxk_state *state, u16 cmd, u16 *pResult)
+{
+	int status;
+	bool powerdown_cmd;
+
+	dprintk(1, "\n");
+
+	/* Write command */
+	status = write16(state, SIO_HI_RA_RAM_CMD__A, cmd);
+	if (status < 0)
+		goto error;
+	if (cmd == SIO_HI_RA_RAM_CMD_RESET)
+		msleep(1);
+
+	powerdown_cmd =
+	    (bool) ((cmd == SIO_HI_RA_RAM_CMD_CONFIG) &&
+		    ((state->m_HICfgCtrl) &
+		     SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) ==
+		    SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ);
+	if (powerdown_cmd == false) {
+		/* Wait until command rdy */
+		u32 retryCount = 0;
+		u16 waitCmd;
+
+		do {
+			msleep(1);
+			retryCount += 1;
+			status = read16(state, SIO_HI_RA_RAM_CMD__A,
+					  &waitCmd);
+		} while ((status < 0) && (retryCount < DRXK_MAX_RETRIES)
+			 && (waitCmd != 0));
+		if (status < 0)
+			goto error;
+		status = read16(state, SIO_HI_RA_RAM_RES__A, pResult);
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int HI_CfgCommand(struct drxk_state *state)
+{
+	int status;
+
+	dprintk(1, "\n");
+
+	mutex_lock(&state->mutex);
+
+	status = write16(state, SIO_HI_RA_RAM_PAR_6__A, state->m_HICfgTimeout);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_HI_RA_RAM_PAR_5__A, state->m_HICfgCtrl);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_HI_RA_RAM_PAR_4__A, state->m_HICfgWakeUpKey);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_HI_RA_RAM_PAR_3__A, state->m_HICfgBridgeDelay);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_HI_RA_RAM_PAR_2__A, state->m_HICfgTimingDiv);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY);
+	if (status < 0)
+		goto error;
+	status = HI_Command(state, SIO_HI_RA_RAM_CMD_CONFIG, 0);
+	if (status < 0)
+		goto error;
+
+	state->m_HICfgCtrl &= ~SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
+error:
+	mutex_unlock(&state->mutex);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int InitHI(struct drxk_state *state)
+{
+	dprintk(1, "\n");
+
+	state->m_HICfgWakeUpKey = (state->demod_address << 1);
+	state->m_HICfgTimeout = 0x96FF;
+	/* port/bridge/power down ctrl */
+	state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE;
+
+	return HI_CfgCommand(state);
+}
+
+static int MPEGTSConfigurePins(struct drxk_state *state, bool mpegEnable)
+{
+	int status = -1;
+	u16 sioPdrMclkCfg = 0;
+	u16 sioPdrMdxCfg = 0;
+
+	dprintk(1, "\n");
+
+	/* stop lock indicator process */
+	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+	if (status < 0)
+		goto error;
+
+	/*  MPEG TS pad configuration */
+	status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA);
+	if (status < 0)
+		goto error;
+
+	if (mpegEnable == false) {
+		/*  Set MPEG TS pads to inputmode */
+		status = write16(state, SIO_PDR_MSTRT_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MCLK_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD0_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+	} else {
+		/* Enable MPEG output */
+		sioPdrMdxCfg =
+			((state->m_TSDataStrength <<
+			SIO_PDR_MD0_CFG_DRIVE__B) | 0x0003);
+		sioPdrMclkCfg = ((state->m_TSClockkStrength <<
+					SIO_PDR_MCLK_CFG_DRIVE__B) |
+					0x0003);
+
+		status = write16(state, SIO_PDR_MSTRT_CFG__A, sioPdrMdxCfg);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000);	/* Disable */
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000);	/* Disable */
+		if (status < 0)
+			goto error;
+		if (state->m_enableParallel == true) {
+			/* paralel -> enable MD1 to MD7 */
+			status = write16(state, SIO_PDR_MD1_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD2_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD3_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD4_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD5_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD6_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD7_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+		} else {
+			sioPdrMdxCfg = ((state->m_TSDataStrength <<
+						SIO_PDR_MD0_CFG_DRIVE__B)
+					| 0x0003);
+			/* serial -> disable MD1 to MD7 */
+			status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+		}
+		status = write16(state, SIO_PDR_MCLK_CFG__A, sioPdrMclkCfg);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD0_CFG__A, sioPdrMdxCfg);
+		if (status < 0)
+			goto error;
+	}
+	/*  Enable MB output over MPEG pads and ctl input */
+	status = write16(state, SIO_PDR_MON_CFG__A, 0x0000);
+	if (status < 0)
+		goto error;
+	/*  Write nomagic word to enable pdr reg write */
+	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int MPEGTSDisable(struct drxk_state *state)
+{
+	dprintk(1, "\n");
+
+	return MPEGTSConfigurePins(state, false);
+}
+
+static int BLChainCmd(struct drxk_state *state,
+		      u16 romOffset, u16 nrOfElements, u32 timeOut)
+{
+	u16 blStatus = 0;
+	int status;
+	unsigned long end;
+
+	dprintk(1, "\n");
+	mutex_lock(&state->mutex);
+	status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_CHAIN);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_CHAIN_ADDR__A, romOffset);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_CHAIN_LEN__A, nrOfElements);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON);
+	if (status < 0)
+		goto error;
+
+	end = jiffies + msecs_to_jiffies(timeOut);
+	do {
+		msleep(1);
+		status = read16(state, SIO_BL_STATUS__A, &blStatus);
+		if (status < 0)
+			goto error;
+	} while ((blStatus == 0x1) &&
+			((time_is_after_jiffies(end))));
+
+	if (blStatus == 0x1) {
+		printk(KERN_ERR "drxk: SIO not ready\n");
+		status = -EINVAL;
+		goto error2;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+error2:
+	mutex_unlock(&state->mutex);
+	return status;
+}
+
+
+static int DownloadMicrocode(struct drxk_state *state,
+			     const u8 pMCImage[], u32 Length)
+{
+	const u8 *pSrc = pMCImage;
+	u16 Flags;
+	u16 Drain;
+	u32 Address;
+	u16 nBlocks;
+	u16 BlockSize;
+	u16 BlockCRC;
+	u32 offset = 0;
+	u32 i;
+	int status = 0;
+
+	dprintk(1, "\n");
+
+	/* down the drain (we don care about MAGIC_WORD) */
+	Drain = (pSrc[0] << 8) | pSrc[1];
+	pSrc += sizeof(u16);
+	offset += sizeof(u16);
+	nBlocks = (pSrc[0] << 8) | pSrc[1];
+	pSrc += sizeof(u16);
+	offset += sizeof(u16);
+
+	for (i = 0; i < nBlocks; i += 1) {
+		Address = (pSrc[0] << 24) | (pSrc[1] << 16) |
+		    (pSrc[2] << 8) | pSrc[3];
+		pSrc += sizeof(u32);
+		offset += sizeof(u32);
+
+		BlockSize = ((pSrc[0] << 8) | pSrc[1]) * sizeof(u16);
+		pSrc += sizeof(u16);
+		offset += sizeof(u16);
+
+		Flags = (pSrc[0] << 8) | pSrc[1];
+		pSrc += sizeof(u16);
+		offset += sizeof(u16);
+
+		BlockCRC = (pSrc[0] << 8) | pSrc[1];
+		pSrc += sizeof(u16);
+		offset += sizeof(u16);
+
+		if (offset + BlockSize > Length) {
+			printk(KERN_ERR "drxk: Firmware is corrupted.\n");
+			return -EINVAL;
+		}
+
+		status = write_block(state, Address, BlockSize, pSrc);
+		if (status < 0) {
+			printk(KERN_ERR "drxk: Error %d while loading firmware\n", status);
+			break;
+		}
+		pSrc += BlockSize;
+		offset += BlockSize;
+	}
+	return status;
+}
+
+static int DVBTEnableOFDMTokenRing(struct drxk_state *state, bool enable)
+{
+	int status;
+	u16 data = 0;
+	u16 desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_ON;
+	u16 desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED;
+	unsigned long end;
+
+	dprintk(1, "\n");
+
+	if (enable == false) {
+		desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_OFF;
+		desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_DOWN;
+	}
+
+	status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data);
+	if (status >= 0 && data == desiredStatus) {
+		/* tokenring already has correct status */
+		return status;
+	}
+	/* Disable/enable dvbt tokenring bridge   */
+	status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, desiredCtrl);
+
+	end = jiffies + msecs_to_jiffies(DRXK_OFDM_TR_SHUTDOWN_TIMEOUT);
+	do {
+		status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data);
+		if ((status >= 0 && data == desiredStatus) || time_is_after_jiffies(end))
+			break;
+		msleep(1);
+	} while (1);
+	if (data != desiredStatus) {
+		printk(KERN_ERR "drxk: SIO not ready\n");
+		return -EINVAL;
+	}
+	return status;
+}
+
+static int MPEGTSStop(struct drxk_state *state)
+{
+	int status = 0;
+	u16 fecOcSncMode = 0;
+	u16 fecOcIprMode = 0;
+
+	dprintk(1, "\n");
+
+	/* Gracefull shutdown (byte boundaries) */
+	status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode);
+	if (status < 0)
+		goto error;
+	fecOcSncMode |= FEC_OC_SNC_MODE_SHUTDOWN__M;
+	status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode);
+	if (status < 0)
+		goto error;
+
+	/* Suppress MCLK during absence of data */
+	status = read16(state, FEC_OC_IPR_MODE__A, &fecOcIprMode);
+	if (status < 0)
+		goto error;
+	fecOcIprMode |= FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M;
+	status = write16(state, FEC_OC_IPR_MODE__A, fecOcIprMode);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int scu_command(struct drxk_state *state,
+		       u16 cmd, u8 parameterLen,
+		       u16 *parameter, u8 resultLen, u16 *result)
+{
+#if (SCU_RAM_PARAM_0__A - SCU_RAM_PARAM_15__A) != 15
+#error DRXK register mapping no longer compatible with this routine!
+#endif
+	u16 curCmd = 0;
+	int status = -EINVAL;
+	unsigned long end;
+	u8 buffer[34];
+	int cnt = 0, ii;
+	const char *p;
+	char errname[30];
+
+	dprintk(1, "\n");
+
+	if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) ||
+	    ((resultLen > 0) && (result == NULL)))
+		goto error;
+
+	mutex_lock(&state->mutex);
+
+	/* assume that the command register is ready
+		since it is checked afterwards */
+	for (ii = parameterLen - 1; ii >= 0; ii -= 1) {
+		buffer[cnt++] = (parameter[ii] & 0xFF);
+		buffer[cnt++] = ((parameter[ii] >> 8) & 0xFF);
+	}
+	buffer[cnt++] = (cmd & 0xFF);
+	buffer[cnt++] = ((cmd >> 8) & 0xFF);
+
+	write_block(state, SCU_RAM_PARAM_0__A -
+			(parameterLen - 1), cnt, buffer);
+	/* Wait until SCU has processed command */
+	end = jiffies + msecs_to_jiffies(DRXK_MAX_WAITTIME);
+	do {
+		msleep(1);
+		status = read16(state, SCU_RAM_COMMAND__A, &curCmd);
+		if (status < 0)
+			goto error;
+	} while (!(curCmd == DRX_SCU_READY) && (time_is_after_jiffies(end)));
+	if (curCmd != DRX_SCU_READY) {
+		printk(KERN_ERR "drxk: SCU not ready\n");
+		status = -EIO;
+		goto error2;
+	}
+	/* read results */
+	if ((resultLen > 0) && (result != NULL)) {
+		s16 err;
+		int ii;
+
+		for (ii = resultLen - 1; ii >= 0; ii -= 1) {
+			status = read16(state, SCU_RAM_PARAM_0__A - ii, &result[ii]);
+			if (status < 0)
+				goto error;
+		}
+
+		/* Check if an error was reported by SCU */
+		err = (s16)result[0];
+		if (err >= 0)
+			goto error;
+
+		/* check for the known error codes */
+		switch (err) {
+		case SCU_RESULT_UNKCMD:
+			p = "SCU_RESULT_UNKCMD";
+			break;
+		case SCU_RESULT_UNKSTD:
+			p = "SCU_RESULT_UNKSTD";
+			break;
+		case SCU_RESULT_SIZE:
+			p = "SCU_RESULT_SIZE";
+			break;
+		case SCU_RESULT_INVPAR:
+			p = "SCU_RESULT_INVPAR";
+			break;
+		default: /* Other negative values are errors */
+			sprintf(errname, "ERROR: %d\n", err);
+			p = errname;
+		}
+		printk(KERN_ERR "drxk: %s while sending cmd 0x%04x with params:", p, cmd);
+		print_hex_dump_bytes("drxk: ", DUMP_PREFIX_NONE, buffer, cnt);
+		status = -EINVAL;
+		goto error2;
+	}
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+error2:
+	mutex_unlock(&state->mutex);
+	return status;
+}
+
+static int SetIqmAf(struct drxk_state *state, bool active)
+{
+	u16 data = 0;
+	int status;
+
+	dprintk(1, "\n");
+
+	/* Configure IQM */
+	status = read16(state, IQM_AF_STDBY__A, &data);
+	if (status < 0)
+		goto error;
+
+	if (!active) {
+		data |= (IQM_AF_STDBY_STDBY_ADC_STANDBY
+				| IQM_AF_STDBY_STDBY_AMP_STANDBY
+				| IQM_AF_STDBY_STDBY_PD_STANDBY
+				| IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY
+				| IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY);
+	} else {
+		data &= ((~IQM_AF_STDBY_STDBY_ADC_STANDBY)
+				& (~IQM_AF_STDBY_STDBY_AMP_STANDBY)
+				& (~IQM_AF_STDBY_STDBY_PD_STANDBY)
+				& (~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY)
+				& (~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY)
+			);
+	}
+	status = write16(state, IQM_AF_STDBY__A, data);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int CtrlPowerMode(struct drxk_state *state, enum DRXPowerMode *mode)
+{
+	int status = 0;
+	u16 sioCcPwdMode = 0;
+
+	dprintk(1, "\n");
+
+	/* Check arguments */
+	if (mode == NULL)
+		return -EINVAL;
+
+	switch (*mode) {
+	case DRX_POWER_UP:
+		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_NONE;
+		break;
+	case DRXK_POWER_DOWN_OFDM:
+		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OFDM;
+		break;
+	case DRXK_POWER_DOWN_CORE:
+		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_CLOCK;
+		break;
+	case DRXK_POWER_DOWN_PLL:
+		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_PLL;
+		break;
+	case DRX_POWER_DOWN:
+		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OSC;
+		break;
+	default:
+		/* Unknow sleep mode */
+		return -EINVAL;
+	}
+
+	/* If already in requested power mode, do nothing */
+	if (state->m_currentPowerMode == *mode)
+		return 0;
+
+	/* For next steps make sure to start from DRX_POWER_UP mode */
+	if (state->m_currentPowerMode != DRX_POWER_UP) {
+		status = PowerUpDevice(state);
+		if (status < 0)
+			goto error;
+		status = DVBTEnableOFDMTokenRing(state, true);
+		if (status < 0)
+			goto error;
+	}
+
+	if (*mode == DRX_POWER_UP) {
+		/* Restore analog & pin configuartion */
+	} else {
+		/* Power down to requested mode */
+		/* Backup some register settings */
+		/* Set pins with possible pull-ups connected
+		   to them in input mode */
+		/* Analog power down */
+		/* ADC power down */
+		/* Power down device */
+		/* stop all comm_exec */
+		/* Stop and power down previous standard */
+		switch (state->m_OperationMode) {
+		case OM_DVBT:
+			status = MPEGTSStop(state);
+			if (status < 0)
+				goto error;
+			status = PowerDownDVBT(state, false);
+			if (status < 0)
+				goto error;
+			break;
+		case OM_QAM_ITU_A:
+		case OM_QAM_ITU_C:
+			status = MPEGTSStop(state);
+			if (status < 0)
+				goto error;
+			status = PowerDownQAM(state);
+			if (status < 0)
+				goto error;
+			break;
+		default:
+			break;
+		}
+		status = DVBTEnableOFDMTokenRing(state, false);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_CC_PWD_MODE__A, sioCcPwdMode);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
+		if (status < 0)
+			goto error;
+
+		if (*mode != DRXK_POWER_DOWN_OFDM) {
+			state->m_HICfgCtrl |=
+				SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
+			status = HI_CfgCommand(state);
+			if (status < 0)
+				goto error;
+		}
+	}
+	state->m_currentPowerMode = *mode;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode)
+{
+	enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM;
+	u16 cmdResult = 0;
+	u16 data = 0;
+	int status;
+
+	dprintk(1, "\n");
+
+	status = read16(state, SCU_COMM_EXEC__A, &data);
+	if (status < 0)
+		goto error;
+	if (data == SCU_COMM_EXEC_ACTIVE) {
+		/* Send OFDM stop command */
+		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult);
+		if (status < 0)
+			goto error;
+		/* Send OFDM reset command */
+		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult);
+		if (status < 0)
+			goto error;
+	}
+
+	/* Reset datapath for OFDM, processors first */
+	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
+	if (status < 0)
+		goto error;
+
+	/* powerdown AFE                   */
+	status = SetIqmAf(state, false);
+	if (status < 0)
+		goto error;
+
+	/* powerdown to OFDM mode          */
+	if (setPowerMode) {
+		status = CtrlPowerMode(state, &powerMode);
+		if (status < 0)
+			goto error;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SetOperationMode(struct drxk_state *state,
+			    enum OperationMode oMode)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+	/*
+	   Stop and power down previous standard
+	   TODO investigate total power down instead of partial
+	   power down depending on "previous" standard.
+	 */
+
+	/* disable HW lock indicator */
+	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+	if (status < 0)
+		goto error;
+
+	/* Device is already at the required mode */
+	if (state->m_OperationMode == oMode)
+		return 0;
+
+	switch (state->m_OperationMode) {
+		/* OM_NONE was added for start up */
+	case OM_NONE:
+		break;
+	case OM_DVBT:
+		status = MPEGTSStop(state);
+		if (status < 0)
+			goto error;
+		status = PowerDownDVBT(state, true);
+		if (status < 0)
+			goto error;
+		state->m_OperationMode = OM_NONE;
+		break;
+	case OM_QAM_ITU_A:	/* fallthrough */
+	case OM_QAM_ITU_C:
+		status = MPEGTSStop(state);
+		if (status < 0)
+			goto error;
+		status = PowerDownQAM(state);
+		if (status < 0)
+			goto error;
+		state->m_OperationMode = OM_NONE;
+		break;
+	case OM_QAM_ITU_B:
+	default:
+		status = -EINVAL;
+		goto error;
+	}
+
+	/*
+		Power up new standard
+		*/
+	switch (oMode) {
+	case OM_DVBT:
+		state->m_OperationMode = oMode;
+		status = SetDVBTStandard(state, oMode);
+		if (status < 0)
+			goto error;
+		break;
+	case OM_QAM_ITU_A:	/* fallthrough */
+	case OM_QAM_ITU_C:
+		state->m_OperationMode = oMode;
+		status = SetQAMStandard(state, oMode);
+		if (status < 0)
+			goto error;
+		break;
+	case OM_QAM_ITU_B:
+	default:
+		status = -EINVAL;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int Start(struct drxk_state *state, s32 offsetFreq,
+		 s32 IntermediateFrequency)
+{
+	int status = -EINVAL;
+
+	u16 IFreqkHz;
+	s32 OffsetkHz = offsetFreq / 1000;
+
+	dprintk(1, "\n");
+	if (state->m_DrxkState != DRXK_STOPPED &&
+		state->m_DrxkState != DRXK_DTV_STARTED)
+		goto error;
+
+	state->m_bMirrorFreqSpect = (state->param.inversion == INVERSION_ON);
+
+	if (IntermediateFrequency < 0) {
+		state->m_bMirrorFreqSpect = !state->m_bMirrorFreqSpect;
+		IntermediateFrequency = -IntermediateFrequency;
+	}
+
+	switch (state->m_OperationMode) {
+	case OM_QAM_ITU_A:
+	case OM_QAM_ITU_C:
+		IFreqkHz = (IntermediateFrequency / 1000);
+		status = SetQAM(state, IFreqkHz, OffsetkHz);
+		if (status < 0)
+			goto error;
+		state->m_DrxkState = DRXK_DTV_STARTED;
+		break;
+	case OM_DVBT:
+		IFreqkHz = (IntermediateFrequency / 1000);
+		status = MPEGTSStop(state);
+		if (status < 0)
+			goto error;
+		status = SetDVBT(state, IFreqkHz, OffsetkHz);
+		if (status < 0)
+			goto error;
+		status = DVBTStart(state);
+		if (status < 0)
+			goto error;
+		state->m_DrxkState = DRXK_DTV_STARTED;
+		break;
+	default:
+		break;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int ShutDown(struct drxk_state *state)
+{
+	dprintk(1, "\n");
+
+	MPEGTSStop(state);
+	return 0;
+}
+
+static int GetLockStatus(struct drxk_state *state, u32 *pLockStatus,
+			 u32 Time)
+{
+	int status = -EINVAL;
+
+	dprintk(1, "\n");
+
+	if (pLockStatus == NULL)
+		goto error;
+
+	*pLockStatus = NOT_LOCKED;
+
+	/* define the SCU command code */
+	switch (state->m_OperationMode) {
+	case OM_QAM_ITU_A:
+	case OM_QAM_ITU_B:
+	case OM_QAM_ITU_C:
+		status = GetQAMLockStatus(state, pLockStatus);
+		break;
+	case OM_DVBT:
+		status = GetDVBTLockStatus(state, pLockStatus);
+		break;
+	default:
+		break;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int MPEGTSStart(struct drxk_state *state)
+{
+	int status;
+
+	u16 fecOcSncMode = 0;
+
+	/* Allow OC to sync again */
+	status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode);
+	if (status < 0)
+		goto error;
+	fecOcSncMode &= ~FEC_OC_SNC_MODE_SHUTDOWN__M;
+	status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_SNC_UNLOCK__A, 1);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int MPEGTSDtoInit(struct drxk_state *state)
+{
+	int status;
+
+	dprintk(1, "\n");
+
+	/* Rate integration settings */
+	status = write16(state, FEC_OC_RCN_CTL_STEP_LO__A, 0x0000);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_RCN_CTL_STEP_HI__A, 0x000C);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_RCN_GAIN__A, 0x000A);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_AVR_PARM_A__A, 0x0008);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_AVR_PARM_B__A, 0x0006);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_TMD_HI_MARGIN__A, 0x0680);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_TMD_LO_MARGIN__A, 0x0080);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_TMD_COUNT__A, 0x03F4);
+	if (status < 0)
+		goto error;
+
+	/* Additional configuration */
+	status = write16(state, FEC_OC_OCR_INVERT__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_SNC_LWM__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_SNC_HWM__A, 12);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int MPEGTSDtoSetup(struct drxk_state *state,
+			  enum OperationMode oMode)
+{
+	int status;
+
+	u16 fecOcRegMode = 0;	/* FEC_OC_MODE       register value */
+	u16 fecOcRegIprMode = 0;	/* FEC_OC_IPR_MODE   register value */
+	u16 fecOcDtoMode = 0;	/* FEC_OC_IPR_INVERT register value */
+	u16 fecOcFctMode = 0;	/* FEC_OC_IPR_INVERT register value */
+	u16 fecOcDtoPeriod = 2;	/* FEC_OC_IPR_INVERT register value */
+	u16 fecOcDtoBurstLen = 188;	/* FEC_OC_IPR_INVERT register value */
+	u32 fecOcRcnCtlRate = 0;	/* FEC_OC_IPR_INVERT register value */
+	u16 fecOcTmdMode = 0;
+	u16 fecOcTmdIntUpdRate = 0;
+	u32 maxBitRate = 0;
+	bool staticCLK = false;
+
+	dprintk(1, "\n");
+
+	/* Check insertion of the Reed-Solomon parity bytes */
+	status = read16(state, FEC_OC_MODE__A, &fecOcRegMode);
+	if (status < 0)
+		goto error;
+	status = read16(state, FEC_OC_IPR_MODE__A, &fecOcRegIprMode);
+	if (status < 0)
+		goto error;
+	fecOcRegMode &= (~FEC_OC_MODE_PARITY__M);
+	fecOcRegIprMode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M);
+	if (state->m_insertRSByte == true) {
+		/* enable parity symbol forward */
+		fecOcRegMode |= FEC_OC_MODE_PARITY__M;
+		/* MVAL disable during parity bytes */
+		fecOcRegIprMode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M;
+		/* TS burst length to 204 */
+		fecOcDtoBurstLen = 204;
+	}
+
+	/* Check serial or parrallel output */
+	fecOcRegIprMode &= (~(FEC_OC_IPR_MODE_SERIAL__M));
+	if (state->m_enableParallel == false) {
+		/* MPEG data output is serial -> set ipr_mode[0] */
+		fecOcRegIprMode |= FEC_OC_IPR_MODE_SERIAL__M;
+	}
+
+	switch (oMode) {
+	case OM_DVBT:
+		maxBitRate = state->m_DVBTBitrate;
+		fecOcTmdMode = 3;
+		fecOcRcnCtlRate = 0xC00000;
+		staticCLK = state->m_DVBTStaticCLK;
+		break;
+	case OM_QAM_ITU_A:	/* fallthrough */
+	case OM_QAM_ITU_C:
+		fecOcTmdMode = 0x0004;
+		fecOcRcnCtlRate = 0xD2B4EE;	/* good for >63 Mb/s */
+		maxBitRate = state->m_DVBCBitrate;
+		staticCLK = state->m_DVBCStaticCLK;
+		break;
+	default:
+		status = -EINVAL;
+	}		/* switch (standard) */
+	if (status < 0)
+		goto error;
+
+	/* Configure DTO's */
+	if (staticCLK) {
+		u32 bitRate = 0;
+
+		/* Rational DTO for MCLK source (static MCLK rate),
+			Dynamic DTO for optimal grouping
+			(avoid intra-packet gaps),
+			DTO offset enable to sync TS burst with MSTRT */
+		fecOcDtoMode = (FEC_OC_DTO_MODE_DYNAMIC__M |
+				FEC_OC_DTO_MODE_OFFSET_ENABLE__M);
+		fecOcFctMode = (FEC_OC_FCT_MODE_RAT_ENA__M |
+				FEC_OC_FCT_MODE_VIRT_ENA__M);
+
+		/* Check user defined bitrate */
+		bitRate = maxBitRate;
+		if (bitRate > 75900000UL) {	/* max is 75.9 Mb/s */
+			bitRate = 75900000UL;
+		}
+		/* Rational DTO period:
+			dto_period = (Fsys / bitrate) - 2
+
+			Result should be floored,
+			to make sure >= requested bitrate
+			*/
+		fecOcDtoPeriod = (u16) (((state->m_sysClockFreq)
+						* 1000) / bitRate);
+		if (fecOcDtoPeriod <= 2)
+			fecOcDtoPeriod = 0;
+		else
+			fecOcDtoPeriod -= 2;
+		fecOcTmdIntUpdRate = 8;
+	} else {
+		/* (commonAttr->staticCLK == false) => dynamic mode */
+		fecOcDtoMode = FEC_OC_DTO_MODE_DYNAMIC__M;
+		fecOcFctMode = FEC_OC_FCT_MODE__PRE;
+		fecOcTmdIntUpdRate = 5;
+	}
+
+	/* Write appropriate registers with requested configuration */
+	status = write16(state, FEC_OC_DTO_BURST_LEN__A, fecOcDtoBurstLen);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_DTO_PERIOD__A, fecOcDtoPeriod);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_DTO_MODE__A, fecOcDtoMode);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_FCT_MODE__A, fecOcFctMode);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_MODE__A, fecOcRegMode);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_IPR_MODE__A, fecOcRegIprMode);
+	if (status < 0)
+		goto error;
+
+	/* Rate integration settings */
+	status = write32(state, FEC_OC_RCN_CTL_RATE_LO__A, fecOcRcnCtlRate);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_TMD_INT_UPD_RATE__A, fecOcTmdIntUpdRate);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_TMD_MODE__A, fecOcTmdMode);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int MPEGTSConfigurePolarity(struct drxk_state *state)
+{
+	u16 fecOcRegIprInvert = 0;
+
+	/* Data mask for the output data byte */
+	u16 InvertDataMask =
+	    FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M |
+	    FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M |
+	    FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M |
+	    FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M;
+
+	dprintk(1, "\n");
+
+	/* Control selective inversion of output bits */
+	fecOcRegIprInvert &= (~(InvertDataMask));
+	if (state->m_invertDATA == true)
+		fecOcRegIprInvert |= InvertDataMask;
+	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MERR__M));
+	if (state->m_invertERR == true)
+		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MERR__M;
+	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MSTRT__M));
+	if (state->m_invertSTR == true)
+		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MSTRT__M;
+	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MVAL__M));
+	if (state->m_invertVAL == true)
+		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MVAL__M;
+	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MCLK__M));
+	if (state->m_invertCLK == true)
+		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MCLK__M;
+
+	return write16(state, FEC_OC_IPR_INVERT__A, fecOcRegIprInvert);
+}
+
+#define   SCU_RAM_AGC_KI_INV_RF_POL__M 0x4000
+
+static int SetAgcRf(struct drxk_state *state,
+		    struct SCfgAgc *pAgcCfg, bool isDTV)
+{
+	int status = -EINVAL;
+	u16 data = 0;
+	struct SCfgAgc *pIfAgcSettings;
+
+	dprintk(1, "\n");
+
+	if (pAgcCfg == NULL)
+		goto error;
+
+	switch (pAgcCfg->ctrlMode) {
+	case DRXK_AGC_CTRL_AUTO:
+		/* Enable RF AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+
+		/* Enable SCU RF AGC loop */
+		data &= ~SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
+
+		/* Polarity */
+		if (state->m_RfAgcPol)
+			data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
+		else
+			data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Set speed (using complementary reduction value) */
+		status = read16(state, SCU_RAM_AGC_KI_RED__A, &data);
+		if (status < 0)
+			goto error;
+
+		data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M;
+		data |= (~(pAgcCfg->speed <<
+				SCU_RAM_AGC_KI_RED_RAGC_RED__B)
+				& SCU_RAM_AGC_KI_RED_RAGC_RED__M);
+
+		status = write16(state, SCU_RAM_AGC_KI_RED__A, data);
+		if (status < 0)
+			goto error;
+
+		if (IsDVBT(state))
+			pIfAgcSettings = &state->m_dvbtIfAgcCfg;
+		else if (IsQAM(state))
+			pIfAgcSettings = &state->m_qamIfAgcCfg;
+		else
+			pIfAgcSettings = &state->m_atvIfAgcCfg;
+		if (pIfAgcSettings == NULL) {
+			status = -EINVAL;
+			goto error;
+		}
+
+		/* Set TOP, only if IF-AGC is in AUTO mode */
+		if (pIfAgcSettings->ctrlMode == DRXK_AGC_CTRL_AUTO)
+			status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->top);
+			if (status < 0)
+				goto error;
+
+		/* Cut-Off current */
+		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, pAgcCfg->cutOffCurrent);
+		if (status < 0)
+			goto error;
+
+		/* Max. output level */
+		status = write16(state, SCU_RAM_AGC_RF_MAX__A, pAgcCfg->maxOutputLevel);
+		if (status < 0)
+			goto error;
+
+		break;
+
+	case DRXK_AGC_CTRL_USER:
+		/* Enable RF AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Disable SCU RF AGC loop */
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+		data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
+		if (state->m_RfAgcPol)
+			data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
+		else
+			data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+
+		/* SCU c.o.c. to 0, enabling full control range */
+		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, 0);
+		if (status < 0)
+			goto error;
+
+		/* Write value to output pin */
+		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, pAgcCfg->outputLevel);
+		if (status < 0)
+			goto error;
+		break;
+
+	case DRXK_AGC_CTRL_OFF:
+		/* Disable RF AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data |= IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Disable SCU RF AGC loop */
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+		data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+		break;
+
+	default:
+		status = -EINVAL;
+
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+#define SCU_RAM_AGC_KI_INV_IF_POL__M 0x2000
+
+static int SetAgcIf(struct drxk_state *state,
+		    struct SCfgAgc *pAgcCfg, bool isDTV)
+{
+	u16 data = 0;
+	int status = 0;
+	struct SCfgAgc *pRfAgcSettings;
+
+	dprintk(1, "\n");
+
+	switch (pAgcCfg->ctrlMode) {
+	case DRXK_AGC_CTRL_AUTO:
+
+		/* Enable IF AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+
+		/* Enable SCU IF AGC loop */
+		data &= ~SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
+
+		/* Polarity */
+		if (state->m_IfAgcPol)
+			data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
+		else
+			data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Set speed (using complementary reduction value) */
+		status = read16(state, SCU_RAM_AGC_KI_RED__A, &data);
+		if (status < 0)
+			goto error;
+		data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M;
+		data |= (~(pAgcCfg->speed <<
+				SCU_RAM_AGC_KI_RED_IAGC_RED__B)
+				& SCU_RAM_AGC_KI_RED_IAGC_RED__M);
+
+		status = write16(state, SCU_RAM_AGC_KI_RED__A, data);
+		if (status < 0)
+			goto error;
+
+		if (IsQAM(state))
+			pRfAgcSettings = &state->m_qamRfAgcCfg;
+		else
+			pRfAgcSettings = &state->m_atvRfAgcCfg;
+		if (pRfAgcSettings == NULL)
+			return -1;
+		/* Restore TOP */
+		status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pRfAgcSettings->top);
+		if (status < 0)
+			goto error;
+		break;
+
+	case DRXK_AGC_CTRL_USER:
+
+		/* Enable IF AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+
+		/* Disable SCU IF AGC loop */
+		data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
+
+		/* Polarity */
+		if (state->m_IfAgcPol)
+			data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
+		else
+			data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Write value to output pin */
+		status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->outputLevel);
+		if (status < 0)
+			goto error;
+		break;
+
+	case DRXK_AGC_CTRL_OFF:
+
+		/* Disable If AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data |= IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Disable SCU IF AGC loop */
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+		data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+		break;
+	}		/* switch (agcSettingsIf->ctrlMode) */
+
+	/* always set the top to support
+		configurations without if-loop */
+	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, pAgcCfg->top);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int ReadIFAgc(struct drxk_state *state, u32 *pValue)
+{
+	u16 agcDacLvl;
+	int status;
+	u16 Level = 0;
+
+	dprintk(1, "\n");
+
+	status = read16(state, IQM_AF_AGC_IF__A, &agcDacLvl);
+	if (status < 0) {
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+		return status;
+	}
+
+	*pValue = 0;
+
+	if (agcDacLvl > DRXK_AGC_DAC_OFFSET)
+		Level = agcDacLvl - DRXK_AGC_DAC_OFFSET;
+	if (Level < 14000)
+		*pValue = (14000 - Level) / 4;
+	else
+		*pValue = 0;
+
+	return status;
+}
+
+static int GetQAMSignalToNoise(struct drxk_state *state,
+			       s32 *pSignalToNoise)
+{
+	int status = 0;
+	u16 qamSlErrPower = 0;	/* accum. error between
+					raw and sliced symbols */
+	u32 qamSlSigPower = 0;	/* used for MER, depends of
+					QAM constellation */
+	u32 qamSlMer = 0;	/* QAM MER */
+
+	dprintk(1, "\n");
+
+	/* MER calculation */
+
+	/* get the register value needed for MER */
+	status = read16(state, QAM_SL_ERR_POWER__A, &qamSlErrPower);
+	if (status < 0) {
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+		return -EINVAL;
+	}
+
+	switch (state->param.u.qam.modulation) {
+	case QAM_16:
+		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM16 << 2;
+		break;
+	case QAM_32:
+		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM32 << 2;
+		break;
+	case QAM_64:
+		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM64 << 2;
+		break;
+	case QAM_128:
+		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM128 << 2;
+		break;
+	default:
+	case QAM_256:
+		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM256 << 2;
+		break;
+	}
+
+	if (qamSlErrPower > 0) {
+		qamSlMer = Log10Times100(qamSlSigPower) -
+			Log10Times100((u32) qamSlErrPower);
+	}
+	*pSignalToNoise = qamSlMer;
+
+	return status;
+}
+
+static int GetDVBTSignalToNoise(struct drxk_state *state,
+				s32 *pSignalToNoise)
+{
+	int status;
+	u16 regData = 0;
+	u32 EqRegTdSqrErrI = 0;
+	u32 EqRegTdSqrErrQ = 0;
+	u16 EqRegTdSqrErrExp = 0;
+	u16 EqRegTdTpsPwrOfs = 0;
+	u16 EqRegTdReqSmbCnt = 0;
+	u32 tpsCnt = 0;
+	u32 SqrErrIQ = 0;
+	u32 a = 0;
+	u32 b = 0;
+	u32 c = 0;
+	u32 iMER = 0;
+	u16 transmissionParams = 0;
+
+	dprintk(1, "\n");
+
+	status = read16(state, OFDM_EQ_TOP_TD_TPS_PWR_OFS__A, &EqRegTdTpsPwrOfs);
+	if (status < 0)
+		goto error;
+	status = read16(state, OFDM_EQ_TOP_TD_REQ_SMB_CNT__A, &EqRegTdReqSmbCnt);
+	if (status < 0)
+		goto error;
+	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_EXP__A, &EqRegTdSqrErrExp);
+	if (status < 0)
+		goto error;
+	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_I__A, &regData);
+	if (status < 0)
+		goto error;
+	/* Extend SQR_ERR_I operational range */
+	EqRegTdSqrErrI = (u32) regData;
+	if ((EqRegTdSqrErrExp > 11) &&
+		(EqRegTdSqrErrI < 0x00000FFFUL)) {
+		EqRegTdSqrErrI += 0x00010000UL;
+	}
+	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_Q__A, &regData);
+	if (status < 0)
+		goto error;
+	/* Extend SQR_ERR_Q operational range */
+	EqRegTdSqrErrQ = (u32) regData;
+	if ((EqRegTdSqrErrExp > 11) &&
+		(EqRegTdSqrErrQ < 0x00000FFFUL))
+		EqRegTdSqrErrQ += 0x00010000UL;
+
+	status = read16(state, OFDM_SC_RA_RAM_OP_PARAM__A, &transmissionParams);
+	if (status < 0)
+		goto error;
+
+	/* Check input data for MER */
+
+	/* MER calculation (in 0.1 dB) without math.h */
+	if ((EqRegTdTpsPwrOfs == 0) || (EqRegTdReqSmbCnt == 0))
+		iMER = 0;
+	else if ((EqRegTdSqrErrI + EqRegTdSqrErrQ) == 0) {
+		/* No error at all, this must be the HW reset value
+			* Apparently no first measurement yet
+			* Set MER to 0.0 */
+		iMER = 0;
+	} else {
+		SqrErrIQ = (EqRegTdSqrErrI + EqRegTdSqrErrQ) <<
+			EqRegTdSqrErrExp;
+		if ((transmissionParams &
+			OFDM_SC_RA_RAM_OP_PARAM_MODE__M)
+			== OFDM_SC_RA_RAM_OP_PARAM_MODE_2K)
+			tpsCnt = 17;
+		else
+			tpsCnt = 68;
+
+		/* IMER = 100 * log10 (x)
+			where x = (EqRegTdTpsPwrOfs^2 *
+			EqRegTdReqSmbCnt * tpsCnt)/SqrErrIQ
+
+			=> IMER = a + b -c
+			where a = 100 * log10 (EqRegTdTpsPwrOfs^2)
+			b = 100 * log10 (EqRegTdReqSmbCnt * tpsCnt)
+			c = 100 * log10 (SqrErrIQ)
+			*/
+
+		/* log(x) x = 9bits * 9bits->18 bits  */
+		a = Log10Times100(EqRegTdTpsPwrOfs *
+					EqRegTdTpsPwrOfs);
+		/* log(x) x = 16bits * 7bits->23 bits  */
+		b = Log10Times100(EqRegTdReqSmbCnt * tpsCnt);
+		/* log(x) x = (16bits + 16bits) << 15 ->32 bits  */
+		c = Log10Times100(SqrErrIQ);
+
+		iMER = a + b;
+		/* No negative MER, clip to zero */
+		if (iMER > c)
+			iMER -= c;
+		else
+			iMER = 0;
+	}
+	*pSignalToNoise = iMER;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int GetSignalToNoise(struct drxk_state *state, s32 *pSignalToNoise)
+{
+	dprintk(1, "\n");
+
+	*pSignalToNoise = 0;
+	switch (state->m_OperationMode) {
+	case OM_DVBT:
+		return GetDVBTSignalToNoise(state, pSignalToNoise);
+	case OM_QAM_ITU_A:
+	case OM_QAM_ITU_C:
+		return GetQAMSignalToNoise(state, pSignalToNoise);
+	default:
+		break;
+	}
+	return 0;
+}
+
+#if 0
+static int GetDVBTQuality(struct drxk_state *state, s32 *pQuality)
+{
+	/* SNR Values for quasi errorfree reception rom Nordig 2.2 */
+	int status = 0;
+
+	dprintk(1, "\n");
+
+	static s32 QE_SN[] = {
+		51,		/* QPSK 1/2 */
+		69,		/* QPSK 2/3 */
+		79,		/* QPSK 3/4 */
+		89,		/* QPSK 5/6 */
+		97,		/* QPSK 7/8 */
+		108,		/* 16-QAM 1/2 */
+		131,		/* 16-QAM 2/3 */
+		146,		/* 16-QAM 3/4 */
+		156,		/* 16-QAM 5/6 */
+		160,		/* 16-QAM 7/8 */
+		165,		/* 64-QAM 1/2 */
+		187,		/* 64-QAM 2/3 */
+		202,		/* 64-QAM 3/4 */
+		216,		/* 64-QAM 5/6 */
+		225,		/* 64-QAM 7/8 */
+	};
+
+	*pQuality = 0;
+
+	do {
+		s32 SignalToNoise = 0;
+		u16 Constellation = 0;
+		u16 CodeRate = 0;
+		u32 SignalToNoiseRel;
+		u32 BERQuality;
+
+		status = GetDVBTSignalToNoise(state, &SignalToNoise);
+		if (status < 0)
+			break;
+		status = read16(state, OFDM_EQ_TOP_TD_TPS_CONST__A, &Constellation);
+		if (status < 0)
+			break;
+		Constellation &= OFDM_EQ_TOP_TD_TPS_CONST__M;
+
+		status = read16(state, OFDM_EQ_TOP_TD_TPS_CODE_HP__A, &CodeRate);
+		if (status < 0)
+			break;
+		CodeRate &= OFDM_EQ_TOP_TD_TPS_CODE_HP__M;
+
+		if (Constellation > OFDM_EQ_TOP_TD_TPS_CONST_64QAM ||
+		    CodeRate > OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8)
+			break;
+		SignalToNoiseRel = SignalToNoise -
+		    QE_SN[Constellation * 5 + CodeRate];
+		BERQuality = 100;
+
+		if (SignalToNoiseRel < -70)
+			*pQuality = 0;
+		else if (SignalToNoiseRel < 30)
+			*pQuality = ((SignalToNoiseRel + 70) *
+				     BERQuality) / 100;
+		else
+			*pQuality = BERQuality;
+	} while (0);
+	return 0;
+};
+
+static int GetDVBCQuality(struct drxk_state *state, s32 *pQuality)
+{
+	int status = 0;
+	*pQuality = 0;
+
+	dprintk(1, "\n");
+
+	do {
+		u32 SignalToNoise = 0;
+		u32 BERQuality = 100;
+		u32 SignalToNoiseRel = 0;
+
+		status = GetQAMSignalToNoise(state, &SignalToNoise);
+		if (status < 0)
+			break;
+
+		switch (state->param.u.qam.modulation) {
+		case QAM_16:
+			SignalToNoiseRel = SignalToNoise - 200;
+			break;
+		case QAM_32:
+			SignalToNoiseRel = SignalToNoise - 230;
+			break;	/* Not in NorDig */
+		case QAM_64:
+			SignalToNoiseRel = SignalToNoise - 260;
+			break;
+		case QAM_128:
+			SignalToNoiseRel = SignalToNoise - 290;
+			break;
+		default:
+		case QAM_256:
+			SignalToNoiseRel = SignalToNoise - 320;
+			break;
+		}
+
+		if (SignalToNoiseRel < -70)
+			*pQuality = 0;
+		else if (SignalToNoiseRel < 30)
+			*pQuality = ((SignalToNoiseRel + 70) *
+				     BERQuality) / 100;
+		else
+			*pQuality = BERQuality;
+	} while (0);
+
+	return status;
+}
+
+static int GetQuality(struct drxk_state *state, s32 *pQuality)
+{
+	dprintk(1, "\n");
+
+	switch (state->m_OperationMode) {
+	case OM_DVBT:
+		return GetDVBTQuality(state, pQuality);
+	case OM_QAM_ITU_A:
+		return GetDVBCQuality(state, pQuality);
+	default:
+		break;
+	}
+
+	return 0;
+}
+#endif
+
+/* Free data ram in SIO HI */
+#define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040
+#define SIO_HI_RA_RAM_USR_END__A   0x420060
+
+#define DRXK_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A)
+#define DRXK_HI_ATOMIC_BUF_END   (SIO_HI_RA_RAM_USR_BEGIN__A + 7)
+#define DRXK_HI_ATOMIC_READ      SIO_HI_RA_RAM_PAR_3_ACP_RW_READ
+#define DRXK_HI_ATOMIC_WRITE     SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE
+
+#define DRXDAP_FASI_ADDR2BLOCK(addr)  (((addr) >> 22) & 0x3F)
+#define DRXDAP_FASI_ADDR2BANK(addr)   (((addr) >> 16) & 0x3F)
+#define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr) & 0x7FFF)
+
+static int ConfigureI2CBridge(struct drxk_state *state, bool bEnableBridge)
+{
+	int status = -EINVAL;
+
+	dprintk(1, "\n");
+
+	if (state->m_DrxkState == DRXK_UNINITIALIZED)
+		goto error;
+	if (state->m_DrxkState == DRXK_POWERED_DOWN)
+		goto error;
+
+	if (state->no_i2c_bridge)
+		return 0;
+
+	status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY);
+	if (status < 0)
+		goto error;
+	if (bEnableBridge) {
+		status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED);
+		if (status < 0)
+			goto error;
+	} else {
+		status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN);
+		if (status < 0)
+			goto error;
+	}
+
+	status = HI_Command(state, SIO_HI_RA_RAM_CMD_BRDCTRL, 0);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SetPreSaw(struct drxk_state *state,
+		     struct SCfgPreSaw *pPreSawCfg)
+{
+	int status = -EINVAL;
+
+	dprintk(1, "\n");
+
+	if ((pPreSawCfg == NULL)
+	    || (pPreSawCfg->reference > IQM_AF_PDREF__M))
+		goto error;
+
+	status = write16(state, IQM_AF_PDREF__A, pPreSawCfg->reference);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int BLDirectCmd(struct drxk_state *state, u32 targetAddr,
+		       u16 romOffset, u16 nrOfElements, u32 timeOut)
+{
+	u16 blStatus = 0;
+	u16 offset = (u16) ((targetAddr >> 0) & 0x00FFFF);
+	u16 blockbank = (u16) ((targetAddr >> 16) & 0x000FFF);
+	int status;
+	unsigned long end;
+
+	dprintk(1, "\n");
+
+	mutex_lock(&state->mutex);
+	status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_DIRECT);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_TGT_HDR__A, blockbank);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_TGT_ADDR__A, offset);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_SRC_ADDR__A, romOffset);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_SRC_LEN__A, nrOfElements);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON);
+	if (status < 0)
+		goto error;
+
+	end = jiffies + msecs_to_jiffies(timeOut);
+	do {
+		status = read16(state, SIO_BL_STATUS__A, &blStatus);
+		if (status < 0)
+			goto error;
+	} while ((blStatus == 0x1) && time_is_after_jiffies(end));
+	if (blStatus == 0x1) {
+		printk(KERN_ERR "drxk: SIO not ready\n");
+		status = -EINVAL;
+		goto error2;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+error2:
+	mutex_unlock(&state->mutex);
+	return status;
+
+}
+
+static int ADCSyncMeasurement(struct drxk_state *state, u16 *count)
+{
+	u16 data = 0;
+	int status;
+
+	dprintk(1, "\n");
+
+	/* Start measurement */
+	status = write16(state, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_START_LOCK__A, 1);
+	if (status < 0)
+		goto error;
+
+	*count = 0;
+	status = read16(state, IQM_AF_PHASE0__A, &data);
+	if (status < 0)
+		goto error;
+	if (data == 127)
+		*count = *count + 1;
+	status = read16(state, IQM_AF_PHASE1__A, &data);
+	if (status < 0)
+		goto error;
+	if (data == 127)
+		*count = *count + 1;
+	status = read16(state, IQM_AF_PHASE2__A, &data);
+	if (status < 0)
+		goto error;
+	if (data == 127)
+		*count = *count + 1;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int ADCSynchronization(struct drxk_state *state)
+{
+	u16 count = 0;
+	int status;
+
+	dprintk(1, "\n");
+
+	status = ADCSyncMeasurement(state, &count);
+	if (status < 0)
+		goto error;
+
+	if (count == 1) {
+		/* Try sampling on a diffrent edge */
+		u16 clkNeg = 0;
+
+		status = read16(state, IQM_AF_CLKNEG__A, &clkNeg);
+		if (status < 0)
+			goto error;
+		if ((clkNeg | IQM_AF_CLKNEG_CLKNEGDATA__M) ==
+			IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS) {
+			clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M));
+			clkNeg |=
+				IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG;
+		} else {
+			clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M));
+			clkNeg |=
+				IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS;
+		}
+		status = write16(state, IQM_AF_CLKNEG__A, clkNeg);
+		if (status < 0)
+			goto error;
+		status = ADCSyncMeasurement(state, &count);
+		if (status < 0)
+			goto error;
+	}
+
+	if (count < 2)
+		status = -EINVAL;
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SetFrequencyShifter(struct drxk_state *state,
+			       u16 intermediateFreqkHz,
+			       s32 tunerFreqOffset, bool isDTV)
+{
+	bool selectPosImage = false;
+	u32 rfFreqResidual = tunerFreqOffset;
+	u32 fmFrequencyShift = 0;
+	bool tunerMirror = !state->m_bMirrorFreqSpect;
+	u32 adcFreq;
+	bool adcFlip;
+	int status;
+	u32 ifFreqActual;
+	u32 samplingFrequency = (u32) (state->m_sysClockFreq / 3);
+	u32 frequencyShift;
+	bool imageToSelect;
+
+	dprintk(1, "\n");
+
+	/*
+	   Program frequency shifter
+	   No need to account for mirroring on RF
+	 */
+	if (isDTV) {
+		if ((state->m_OperationMode == OM_QAM_ITU_A) ||
+		    (state->m_OperationMode == OM_QAM_ITU_C) ||
+		    (state->m_OperationMode == OM_DVBT))
+			selectPosImage = true;
+		else
+			selectPosImage = false;
+	}
+	if (tunerMirror)
+		/* tuner doesn't mirror */
+		ifFreqActual = intermediateFreqkHz +
+		    rfFreqResidual + fmFrequencyShift;
+	else
+		/* tuner mirrors */
+		ifFreqActual = intermediateFreqkHz -
+		    rfFreqResidual - fmFrequencyShift;
+	if (ifFreqActual > samplingFrequency / 2) {
+		/* adc mirrors */
+		adcFreq = samplingFrequency - ifFreqActual;
+		adcFlip = true;
+	} else {
+		/* adc doesn't mirror */
+		adcFreq = ifFreqActual;
+		adcFlip = false;
+	}
+
+	frequencyShift = adcFreq;
+	imageToSelect = state->m_rfmirror ^ tunerMirror ^
+	    adcFlip ^ selectPosImage;
+	state->m_IqmFsRateOfs =
+	    Frac28a((frequencyShift), samplingFrequency);
+
+	if (imageToSelect)
+		state->m_IqmFsRateOfs = ~state->m_IqmFsRateOfs + 1;
+
+	/* Program frequency shifter with tuner offset compensation */
+	/* frequencyShift += tunerFreqOffset; TODO */
+	status = write32(state, IQM_FS_RATE_OFS_LO__A,
+			 state->m_IqmFsRateOfs);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int InitAGC(struct drxk_state *state, bool isDTV)
+{
+	u16 ingainTgt = 0;
+	u16 ingainTgtMin = 0;
+	u16 ingainTgtMax = 0;
+	u16 clpCyclen = 0;
+	u16 clpSumMin = 0;
+	u16 clpDirTo = 0;
+	u16 snsSumMin = 0;
+	u16 snsSumMax = 0;
+	u16 clpSumMax = 0;
+	u16 snsDirTo = 0;
+	u16 kiInnergainMin = 0;
+	u16 ifIaccuHiTgt = 0;
+	u16 ifIaccuHiTgtMin = 0;
+	u16 ifIaccuHiTgtMax = 0;
+	u16 data = 0;
+	u16 fastClpCtrlDelay = 0;
+	u16 clpCtrlMode = 0;
+	int status = 0;
+
+	dprintk(1, "\n");
+
+	/* Common settings */
+	snsSumMax = 1023;
+	ifIaccuHiTgtMin = 2047;
+	clpCyclen = 500;
+	clpSumMax = 1023;
+
+	/* AGCInit() not available for DVBT; init done in microcode */
+	if (!IsQAM(state)) {
+		printk(KERN_ERR "drxk: %s: mode %d is not DVB-C\n", __func__, state->m_OperationMode);
+		return -EINVAL;
+	}
+
+	/* FIXME: Analog TV AGC require different settings */
+
+	/* Standard specific settings */
+	clpSumMin = 8;
+	clpDirTo = (u16) -9;
+	clpCtrlMode = 0;
+	snsSumMin = 8;
+	snsDirTo = (u16) -9;
+	kiInnergainMin = (u16) -1030;
+	ifIaccuHiTgtMax = 0x2380;
+	ifIaccuHiTgt = 0x2380;
+	ingainTgtMin = 0x0511;
+	ingainTgt = 0x0511;
+	ingainTgtMax = 5119;
+	fastClpCtrlDelay = state->m_qamIfAgcCfg.FastClipCtrlDelay;
+
+	status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, fastClpCtrlDelay);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_AGC_CLP_CTRL_MODE__A, clpCtrlMode);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_INGAIN_TGT__A, ingainTgt);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, ingainTgtMin);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, ingainTgtMax);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A, ifIaccuHiTgtMin);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, ifIaccuHiTgtMax);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_IF_IACCU_LO__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_RF_IACCU_LO__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_SUM_MAX__A, clpSumMax);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_SUM_MAX__A, snsSumMax);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_AGC_KI_INNERGAIN_MIN__A, kiInnergainMin);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, ifIaccuHiTgt);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_CYCLEN__A, clpCyclen);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MAX__A, 1023);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MIN__A, (u16) -1023);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A, 50);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_AGC_KI_MAXMINGAIN_TH__A, 20);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_SUM_MIN__A, clpSumMin);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_SUM_MIN__A, snsSumMin);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_DIR_TO__A, clpDirTo);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_DIR_TO__A, snsDirTo);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_KI_MIN__A, 0x0117);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_KI_MAX__A, 0x0657);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_SUM__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_CYCCNT__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_DIR_WD__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_DIR_STP__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_SUM__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_CYCCNT__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_DIR_WD__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_DIR_STP__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_CYCLEN__A, 500);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_KI_CYCLEN__A, 500);
+	if (status < 0)
+		goto error;
+
+	/* Initialize inner-loop KI gain factors */
+	status = read16(state, SCU_RAM_AGC_KI__A, &data);
+	if (status < 0)
+		goto error;
+
+	data = 0x0657;
+	data &= ~SCU_RAM_AGC_KI_RF__M;
+	data |= (DRXK_KI_RAGC_QAM << SCU_RAM_AGC_KI_RF__B);
+	data &= ~SCU_RAM_AGC_KI_IF__M;
+	data |= (DRXK_KI_IAGC_QAM << SCU_RAM_AGC_KI_IF__B);
+
+	status = write16(state, SCU_RAM_AGC_KI__A, data);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int DVBTQAMGetAccPktErr(struct drxk_state *state, u16 *packetErr)
+{
+	int status;
+
+	dprintk(1, "\n");
+	if (packetErr == NULL)
+		status = write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0);
+	else
+		status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, packetErr);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int DVBTScCommand(struct drxk_state *state,
+			 u16 cmd, u16 subcmd,
+			 u16 param0, u16 param1, u16 param2,
+			 u16 param3, u16 param4)
+{
+	u16 curCmd = 0;
+	u16 errCode = 0;
+	u16 retryCnt = 0;
+	u16 scExec = 0;
+	int status;
+
+	dprintk(1, "\n");
+	status = read16(state, OFDM_SC_COMM_EXEC__A, &scExec);
+	if (scExec != 1) {
+		/* SC is not running */
+		status = -EINVAL;
+	}
+	if (status < 0)
+		goto error;
+
+	/* Wait until sc is ready to receive command */
+	retryCnt = 0;
+	do {
+		msleep(1);
+		status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd);
+		retryCnt++;
+	} while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES));
+	if (retryCnt >= DRXK_MAX_RETRIES && (status < 0))
+		goto error;
+
+	/* Write sub-command */
+	switch (cmd) {
+		/* All commands using sub-cmd */
+	case OFDM_SC_RA_RAM_CMD_PROC_START:
+	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
+	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
+		status = write16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, subcmd);
+		if (status < 0)
+			goto error;
+		break;
+	default:
+		/* Do nothing */
+		break;
+	}
+
+	/* Write needed parameters and the command */
+	switch (cmd) {
+		/* All commands using 5 parameters */
+		/* All commands using 4 parameters */
+		/* All commands using 3 parameters */
+		/* All commands using 2 parameters */
+	case OFDM_SC_RA_RAM_CMD_PROC_START:
+	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
+	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
+		status = write16(state, OFDM_SC_RA_RAM_PARAM1__A, param1);
+		/* All commands using 1 parameters */
+	case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING:
+	case OFDM_SC_RA_RAM_CMD_USER_IO:
+		status = write16(state, OFDM_SC_RA_RAM_PARAM0__A, param0);
+		/* All commands using 0 parameters */
+	case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM:
+	case OFDM_SC_RA_RAM_CMD_NULL:
+		/* Write command */
+		status = write16(state, OFDM_SC_RA_RAM_CMD__A, cmd);
+		break;
+	default:
+		/* Unknown command */
+		status = -EINVAL;
+	}
+	if (status < 0)
+		goto error;
+
+	/* Wait until sc is ready processing command */
+	retryCnt = 0;
+	do {
+		msleep(1);
+		status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd);
+		retryCnt++;
+	} while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES));
+	if (retryCnt >= DRXK_MAX_RETRIES && (status < 0))
+		goto error;
+
+	/* Check for illegal cmd */
+	status = read16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, &errCode);
+	if (errCode == 0xFFFF) {
+		/* illegal command */
+		status = -EINVAL;
+	}
+	if (status < 0)
+		goto error;
+
+	/* Retreive results parameters from SC */
+	switch (cmd) {
+		/* All commands yielding 5 results */
+		/* All commands yielding 4 results */
+		/* All commands yielding 3 results */
+		/* All commands yielding 2 results */
+		/* All commands yielding 1 result */
+	case OFDM_SC_RA_RAM_CMD_USER_IO:
+	case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM:
+		status = read16(state, OFDM_SC_RA_RAM_PARAM0__A, &(param0));
+		/* All commands yielding 0 results */
+	case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING:
+	case OFDM_SC_RA_RAM_CMD_SET_TIMER:
+	case OFDM_SC_RA_RAM_CMD_PROC_START:
+	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
+	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
+	case OFDM_SC_RA_RAM_CMD_NULL:
+		break;
+	default:
+		/* Unknown command */
+		status = -EINVAL;
+		break;
+	}			/* switch (cmd->cmd) */
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int PowerUpDVBT(struct drxk_state *state)
+{
+	enum DRXPowerMode powerMode = DRX_POWER_UP;
+	int status;
+
+	dprintk(1, "\n");
+	status = CtrlPowerMode(state, &powerMode);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int DVBTCtrlSetIncEnable(struct drxk_state *state, bool *enabled)
+{
+	int status;
+
+	dprintk(1, "\n");
+	if (*enabled == true)
+		status = write16(state, IQM_CF_BYPASSDET__A, 0);
+	else
+		status = write16(state, IQM_CF_BYPASSDET__A, 1);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+#define DEFAULT_FR_THRES_8K     4000
+static int DVBTCtrlSetFrEnable(struct drxk_state *state, bool *enabled)
+{
+
+	int status;
+
+	dprintk(1, "\n");
+	if (*enabled == true) {
+		/* write mask to 1 */
+		status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A,
+				   DEFAULT_FR_THRES_8K);
+	} else {
+		/* write mask to 0 */
+		status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, 0);
+	}
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int DVBTCtrlSetEchoThreshold(struct drxk_state *state,
+				    struct DRXKCfgDvbtEchoThres_t *echoThres)
+{
+	u16 data = 0;
+	int status;
+
+	dprintk(1, "\n");
+	status = read16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, &data);
+	if (status < 0)
+		goto error;
+
+	switch (echoThres->fftMode) {
+	case DRX_FFTMODE_2K:
+		data &= ~OFDM_SC_RA_RAM_ECHO_THRES_2K__M;
+		data |= ((echoThres->threshold <<
+			OFDM_SC_RA_RAM_ECHO_THRES_2K__B)
+			& (OFDM_SC_RA_RAM_ECHO_THRES_2K__M));
+		break;
+	case DRX_FFTMODE_8K:
+		data &= ~OFDM_SC_RA_RAM_ECHO_THRES_8K__M;
+		data |= ((echoThres->threshold <<
+			OFDM_SC_RA_RAM_ECHO_THRES_8K__B)
+			& (OFDM_SC_RA_RAM_ECHO_THRES_8K__M));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	status = write16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, data);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int DVBTCtrlSetSqiSpeed(struct drxk_state *state,
+			       enum DRXKCfgDvbtSqiSpeed *speed)
+{
+	int status = -EINVAL;
+
+	dprintk(1, "\n");
+
+	switch (*speed) {
+	case DRXK_DVBT_SQI_SPEED_FAST:
+	case DRXK_DVBT_SQI_SPEED_MEDIUM:
+	case DRXK_DVBT_SQI_SPEED_SLOW:
+		break;
+	default:
+		goto error;
+	}
+	status = write16(state, SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A,
+			   (u16) *speed);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief Activate DVBT specific presets
+* \param demod instance of demodulator.
+* \return DRXStatus_t.
+*
+* Called in DVBTSetStandard
+*
+*/
+static int DVBTActivatePresets(struct drxk_state *state)
+{
+	int status;
+	bool setincenable = false;
+	bool setfrenable = true;
+
+	struct DRXKCfgDvbtEchoThres_t echoThres2k = { 0, DRX_FFTMODE_2K };
+	struct DRXKCfgDvbtEchoThres_t echoThres8k = { 0, DRX_FFTMODE_8K };
+
+	dprintk(1, "\n");
+	status = DVBTCtrlSetIncEnable(state, &setincenable);
+	if (status < 0)
+		goto error;
+	status = DVBTCtrlSetFrEnable(state, &setfrenable);
+	if (status < 0)
+		goto error;
+	status = DVBTCtrlSetEchoThreshold(state, &echoThres2k);
+	if (status < 0)
+		goto error;
+	status = DVBTCtrlSetEchoThreshold(state, &echoThres8k);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, state->m_dvbtIfAgcCfg.IngainTgtMax);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief Initialize channelswitch-independent settings for DVBT.
+* \param demod instance of demodulator.
+* \return DRXStatus_t.
+*
+* For ROM code channel filter taps are loaded from the bootloader. For microcode
+* the DVB-T taps from the drxk_filters.h are used.
+*/
+static int SetDVBTStandard(struct drxk_state *state,
+			   enum OperationMode oMode)
+{
+	u16 cmdResult = 0;
+	u16 data = 0;
+	int status;
+
+	dprintk(1, "\n");
+
+	PowerUpDVBT(state);
+	/* added antenna switch */
+	SwitchAntennaToDVBT(state);
+	/* send OFDM reset command */
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult);
+	if (status < 0)
+		goto error;
+
+	/* send OFDM setenv command */
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 0, NULL, 1, &cmdResult);
+	if (status < 0)
+		goto error;
+
+	/* reset datapath for OFDM, processors first */
+	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
+	if (status < 0)
+		goto error;
+
+	/* IQM setup */
+	/* synchronize on ofdstate->m_festart */
+	status = write16(state, IQM_AF_UPD_SEL__A, 1);
+	if (status < 0)
+		goto error;
+	/* window size for clipping ADC detection */
+	status = write16(state, IQM_AF_CLP_LEN__A, 0);
+	if (status < 0)
+		goto error;
+	/* window size for for sense pre-SAW detection */
+	status = write16(state, IQM_AF_SNS_LEN__A, 0);
+	if (status < 0)
+		goto error;
+	/* sense threshold for sense pre-SAW detection */
+	status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC);
+	if (status < 0)
+		goto error;
+	status = SetIqmAf(state, true);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_AF_AGC_RF__A, 0);
+	if (status < 0)
+		goto error;
+
+	/* Impulse noise cruncher setup */
+	status = write16(state, IQM_AF_INC_LCT__A, 0);	/* crunch in IQM_CF */
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_DET_LCT__A, 0);	/* detect in IQM_CF */
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_WND_LEN__A, 3);	/* peak detector window length */
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_RC_STRETCH__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_OUT_ENA__A, 0x4);	/* enable output 2 */
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_DS_ENA__A, 0x4);	/* decimate output 2 */
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_SCALE__A, 1600);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_SCALE_SH__A, 0);
+	if (status < 0)
+		goto error;
+
+	/* virtual clipping threshold for clipping ADC detection */
+	status = write16(state, IQM_AF_CLP_TH__A, 448);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_DATATH__A, 495);	/* crunching threshold */
+	if (status < 0)
+		goto error;
+
+	status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_DVBT, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_CF_PKDTH__A, 2);	/* peak detector threshold */
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_POW_MEAS_LEN__A, 2);
+	if (status < 0)
+		goto error;
+	/* enable power measurement interrupt */
+	status = write16(state, IQM_CF_COMM_INT_MSK__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE);
+	if (status < 0)
+		goto error;
+
+	/* IQM will not be reset from here, sync ADC and update/init AGC */
+	status = ADCSynchronization(state);
+	if (status < 0)
+		goto error;
+	status = SetPreSaw(state, &state->m_dvbtPreSawCfg);
+	if (status < 0)
+		goto error;
+
+	/* Halt SCU to enable safe non-atomic accesses */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
+	if (status < 0)
+		goto error;
+
+	status = SetAgcRf(state, &state->m_dvbtRfAgcCfg, true);
+	if (status < 0)
+		goto error;
+	status = SetAgcIf(state, &state->m_dvbtIfAgcCfg, true);
+	if (status < 0)
+		goto error;
+
+	/* Set Noise Estimation notch width and enable DC fix */
+	status = read16(state, OFDM_SC_RA_RAM_CONFIG__A, &data);
+	if (status < 0)
+		goto error;
+	data |= OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M;
+	status = write16(state, OFDM_SC_RA_RAM_CONFIG__A, data);
+	if (status < 0)
+		goto error;
+
+	/* Activate SCU to enable SCU commands */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+
+	if (!state->m_DRXK_A3_ROM_CODE) {
+		/* AGCInit() is not done for DVBT, so set agcFastClipCtrlDelay  */
+		status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, state->m_dvbtIfAgcCfg.FastClipCtrlDelay);
+		if (status < 0)
+			goto error;
+	}
+
+	/* OFDM_SC setup */
+#ifdef COMPILE_FOR_NONRT
+	status = write16(state, OFDM_SC_RA_RAM_BE_OPT_DELAY__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A, 2);
+	if (status < 0)
+		goto error;
+#endif
+
+	/* FEC setup */
+	status = write16(state, FEC_DI_INPUT_CTL__A, 1);	/* OFDM input */
+	if (status < 0)
+		goto error;
+
+
+#ifdef COMPILE_FOR_NONRT
+	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x400);
+	if (status < 0)
+		goto error;
+#else
+	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x1000);
+	if (status < 0)
+		goto error;
+#endif
+	status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, 0x0001);
+	if (status < 0)
+		goto error;
+
+	/* Setup MPEG bus */
+	status = MPEGTSDtoSetup(state, OM_DVBT);
+	if (status < 0)
+		goto error;
+	/* Set DVBT Presets */
+	status = DVBTActivatePresets(state);
+	if (status < 0)
+		goto error;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+/**
+* \brief Start dvbt demodulating for channel.
+* \param demod instance of demodulator.
+* \return DRXStatus_t.
+*/
+static int DVBTStart(struct drxk_state *state)
+{
+	u16 param1;
+	int status;
+	/* DRXKOfdmScCmd_t scCmd; */
+
+	dprintk(1, "\n");
+	/* Start correct processes to get in lock */
+	/* DRXK: OFDM_SC_RA_RAM_PROC_LOCKTRACK is no longer in mapfile! */
+	param1 = OFDM_SC_RA_RAM_LOCKTRACK_MIN;
+	status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_PROC_START, 0, OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M, param1, 0, 0, 0);
+	if (status < 0)
+		goto error;
+	/* Start FEC OC */
+	status = MPEGTSStart(state);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+
+/*============================================================================*/
+
+/**
+* \brief Set up dvbt demodulator for channel.
+* \param demod instance of demodulator.
+* \return DRXStatus_t.
+* // original DVBTSetChannel()
+*/
+static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz,
+		   s32 tunerFreqOffset)
+{
+	u16 cmdResult = 0;
+	u16 transmissionParams = 0;
+	u16 operationMode = 0;
+	u32 iqmRcRateOfs = 0;
+	u32 bandwidth = 0;
+	u16 param1;
+	int status;
+
+	dprintk(1, "IF =%d, TFO = %d\n", IntermediateFreqkHz, tunerFreqOffset);
+
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult);
+	if (status < 0)
+		goto error;
+
+	/* Halt SCU to enable safe non-atomic accesses */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
+	if (status < 0)
+		goto error;
+
+	/* Stop processors */
+	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+
+	/* Mandatory fix, always stop CP, required to set spl offset back to
+		hardware default (is set to 0 by ucode during pilot detection */
+	status = write16(state, OFDM_CP_COMM_EXEC__A, OFDM_CP_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+
+	/*== Write channel settings to device =====================================*/
+
+	/* mode */
+	switch (state->param.u.ofdm.transmission_mode) {
+	case TRANSMISSION_MODE_AUTO:
+	default:
+		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_MODE__M;
+		/* fall through , try first guess DRX_FFTMODE_8K */
+	case TRANSMISSION_MODE_8K:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_8K;
+		break;
+	case TRANSMISSION_MODE_2K:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_2K;
+		break;
+	}
+
+	/* guard */
+	switch (state->param.u.ofdm.guard_interval) {
+	default:
+	case GUARD_INTERVAL_AUTO:
+		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_GUARD__M;
+		/* fall through , try first guess DRX_GUARD_1DIV4 */
+	case GUARD_INTERVAL_1_4:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_4;
+		break;
+	case GUARD_INTERVAL_1_32:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_32;
+		break;
+	case GUARD_INTERVAL_1_16:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_16;
+		break;
+	case GUARD_INTERVAL_1_8:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_8;
+		break;
+	}
+
+	/* hierarchy */
+	switch (state->param.u.ofdm.hierarchy_information) {
+	case HIERARCHY_AUTO:
+	case HIERARCHY_NONE:
+	default:
+		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_HIER__M;
+		/* fall through , try first guess SC_RA_RAM_OP_PARAM_HIER_NO */
+		/* transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_NO; */
+		/* break; */
+	case HIERARCHY_1:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A1;
+		break;
+	case HIERARCHY_2:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A2;
+		break;
+	case HIERARCHY_4:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A4;
+		break;
+	}
+
+
+	/* constellation */
+	switch (state->param.u.ofdm.constellation) {
+	case QAM_AUTO:
+	default:
+		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_CONST__M;
+		/* fall through , try first guess DRX_CONSTELLATION_QAM64 */
+	case QAM_64:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64;
+		break;
+	case QPSK:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK;
+		break;
+	case QAM_16:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16;
+		break;
+	}
+#if 0
+	/* No hierachical channels support in BDA */
+	/* Priority (only for hierarchical channels) */
+	switch (channel->priority) {
+	case DRX_PRIORITY_LOW:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO;
+		WR16(devAddr, OFDM_EC_SB_PRIOR__A,
+			OFDM_EC_SB_PRIOR_LO);
+		break;
+	case DRX_PRIORITY_HIGH:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI;
+		WR16(devAddr, OFDM_EC_SB_PRIOR__A,
+			OFDM_EC_SB_PRIOR_HI));
+		break;
+	case DRX_PRIORITY_UNKNOWN:	/* fall through */
+	default:
+		status = -EINVAL;
+		goto error;
+	}
+#else
+	/* Set Priorty high */
+	transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI;
+	status = write16(state, OFDM_EC_SB_PRIOR__A, OFDM_EC_SB_PRIOR_HI);
+	if (status < 0)
+		goto error;
+#endif
+
+	/* coderate */
+	switch (state->param.u.ofdm.code_rate_HP) {
+	case FEC_AUTO:
+	default:
+		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_RATE__M;
+		/* fall through , try first guess DRX_CODERATE_2DIV3 */
+	case FEC_2_3:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3;
+		break;
+	case FEC_1_2:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2;
+		break;
+	case FEC_3_4:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4;
+		break;
+	case FEC_5_6:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6;
+		break;
+	case FEC_7_8:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8;
+		break;
+	}
+
+	/* SAW filter selection: normaly not necesarry, but if wanted
+		the application can select a SAW filter via the driver by using UIOs */
+	/* First determine real bandwidth (Hz) */
+	/* Also set delay for impulse noise cruncher */
+	/* Also set parameters for EC_OC fix, note EC_OC_REG_TMD_HIL_MAR is changed
+		by SC for fix for some 8K,1/8 guard but is restored by InitEC and ResetEC
+		functions */
+	switch (state->param.u.ofdm.bandwidth) {
+	case BANDWIDTH_AUTO:
+	case BANDWIDTH_8_MHZ:
+		bandwidth = DRXK_BANDWIDTH_8MHZ_IN_HZ;
+		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3052);
+		if (status < 0)
+			goto error;
+		/* cochannel protection for PAL 8 MHz */
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 7);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 7);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 7);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1);
+		if (status < 0)
+			goto error;
+		break;
+	case BANDWIDTH_7_MHZ:
+		bandwidth = DRXK_BANDWIDTH_7MHZ_IN_HZ;
+		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3491);
+		if (status < 0)
+			goto error;
+		/* cochannel protection for PAL 7 MHz */
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 8);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 8);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 4);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1);
+		if (status < 0)
+			goto error;
+		break;
+	case BANDWIDTH_6_MHZ:
+		bandwidth = DRXK_BANDWIDTH_6MHZ_IN_HZ;
+		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 4073);
+		if (status < 0)
+			goto error;
+		/* cochannel protection for NTSC 6 MHz */
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 19);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 19);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 14);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1);
+		if (status < 0)
+			goto error;
+		break;
+	default:
+		status = -EINVAL;
+		goto error;
+	}
+
+	if (iqmRcRateOfs == 0) {
+		/* Now compute IQM_RC_RATE_OFS
+			(((SysFreq/BandWidth)/2)/2) -1) * 2^23)
+			=>
+			((SysFreq / BandWidth) * (2^21)) - (2^23)
+			*/
+		/* (SysFreq / BandWidth) * (2^28)  */
+		/* assert (MAX(sysClk)/MIN(bandwidth) < 16)
+			=> assert(MAX(sysClk) < 16*MIN(bandwidth))
+			=> assert(109714272 > 48000000) = true so Frac 28 can be used  */
+		iqmRcRateOfs = Frac28a((u32)
+					((state->m_sysClockFreq *
+						1000) / 3), bandwidth);
+		/* (SysFreq / BandWidth) * (2^21), rounding before truncating  */
+		if ((iqmRcRateOfs & 0x7fL) >= 0x40)
+			iqmRcRateOfs += 0x80L;
+		iqmRcRateOfs = iqmRcRateOfs >> 7;
+		/* ((SysFreq / BandWidth) * (2^21)) - (2^23)  */
+		iqmRcRateOfs = iqmRcRateOfs - (1 << 23);
+	}
+
+	iqmRcRateOfs &=
+		((((u32) IQM_RC_RATE_OFS_HI__M) <<
+		IQM_RC_RATE_OFS_LO__W) | IQM_RC_RATE_OFS_LO__M);
+	status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRateOfs);
+	if (status < 0)
+		goto error;
+
+	/* Bandwidth setting done */
+
+#if 0
+	status = DVBTSetFrequencyShift(demod, channel, tunerOffset);
+	if (status < 0)
+		goto error;
+#endif
+	status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true);
+	if (status < 0)
+		goto error;
+
+	/*== Start SC, write channel settings to SC ===============================*/
+
+	/* Activate SCU to enable SCU commands */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+
+	/* Enable SC after setting all other parameters */
+	status = write16(state, OFDM_SC_COMM_STATE__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, OFDM_SC_COMM_EXEC__A, 1);
+	if (status < 0)
+		goto error;
+
+
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult);
+	if (status < 0)
+		goto error;
+
+	/* Write SC parameter registers, set all AUTO flags in operation mode */
+	param1 = (OFDM_SC_RA_RAM_OP_AUTO_MODE__M |
+			OFDM_SC_RA_RAM_OP_AUTO_GUARD__M |
+			OFDM_SC_RA_RAM_OP_AUTO_CONST__M |
+			OFDM_SC_RA_RAM_OP_AUTO_HIER__M |
+			OFDM_SC_RA_RAM_OP_AUTO_RATE__M);
+	status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM,
+				0, transmissionParams, param1, 0, 0, 0);
+	if (status < 0)
+		goto error;
+
+	if (!state->m_DRXK_A3_ROM_CODE)
+		status = DVBTCtrlSetSqiSpeed(state, &state->m_sqiSpeed);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+
+/*============================================================================*/
+
+/**
+* \brief Retreive lock status .
+* \param demod    Pointer to demodulator instance.
+* \param lockStat Pointer to lock status structure.
+* \return DRXStatus_t.
+*
+*/
+static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus)
+{
+	int status;
+	const u16 mpeg_lock_mask = (OFDM_SC_RA_RAM_LOCK_MPEG__M |
+				    OFDM_SC_RA_RAM_LOCK_FEC__M);
+	const u16 fec_lock_mask = (OFDM_SC_RA_RAM_LOCK_FEC__M);
+	const u16 demod_lock_mask = OFDM_SC_RA_RAM_LOCK_DEMOD__M;
+
+	u16 ScRaRamLock = 0;
+	u16 ScCommExec = 0;
+
+	dprintk(1, "\n");
+
+	*pLockStatus = NOT_LOCKED;
+	/* driver 0.9.0 */
+	/* Check if SC is running */
+	status = read16(state, OFDM_SC_COMM_EXEC__A, &ScCommExec);
+	if (status < 0)
+		goto end;
+	if (ScCommExec == OFDM_SC_COMM_EXEC_STOP)
+		goto end;
+
+	status = read16(state, OFDM_SC_RA_RAM_LOCK__A, &ScRaRamLock);
+	if (status < 0)
+		goto end;
+
+	if ((ScRaRamLock & mpeg_lock_mask) == mpeg_lock_mask)
+		*pLockStatus = MPEG_LOCK;
+	else if ((ScRaRamLock & fec_lock_mask) == fec_lock_mask)
+		*pLockStatus = FEC_LOCK;
+	else if ((ScRaRamLock & demod_lock_mask) == demod_lock_mask)
+		*pLockStatus = DEMOD_LOCK;
+	else if (ScRaRamLock & OFDM_SC_RA_RAM_LOCK_NODVBT__M)
+		*pLockStatus = NEVER_LOCK;
+end:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int PowerUpQAM(struct drxk_state *state)
+{
+	enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM;
+	int status;
+
+	dprintk(1, "\n");
+	status = CtrlPowerMode(state, &powerMode);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+
+/** Power Down QAM */
+static int PowerDownQAM(struct drxk_state *state)
+{
+	u16 data = 0;
+	u16 cmdResult;
+	int status = 0;
+
+	dprintk(1, "\n");
+	status = read16(state, SCU_COMM_EXEC__A, &data);
+	if (status < 0)
+		goto error;
+	if (data == SCU_COMM_EXEC_ACTIVE) {
+		/*
+			STOP demodulator
+			QAM and HW blocks
+			*/
+		/* stop all comstate->m_exec */
+		status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP);
+		if (status < 0)
+			goto error;
+		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult);
+		if (status < 0)
+			goto error;
+	}
+	/* powerdown AFE                   */
+	status = SetIqmAf(state, false);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief Setup of the QAM Measurement intervals for signal quality
+* \param demod instance of demod.
+* \param constellation current constellation.
+* \return DRXStatus_t.
+*
+*  NOTE:
+*  Take into account that for certain settings the errorcounters can overflow.
+*  The implementation does not check this.
+*
+*/
+static int SetQAMMeasurement(struct drxk_state *state,
+			     enum EDrxkConstellation constellation,
+			     u32 symbolRate)
+{
+	u32 fecBitsDesired = 0;	/* BER accounting period */
+	u32 fecRsPeriodTotal = 0;	/* Total period */
+	u16 fecRsPrescale = 0;	/* ReedSolomon Measurement Prescale */
+	u16 fecRsPeriod = 0;	/* Value for corresponding I2C register */
+	int status = 0;
+
+	dprintk(1, "\n");
+
+	fecRsPrescale = 1;
+	/* fecBitsDesired = symbolRate [kHz] *
+		FrameLenght [ms] *
+		(constellation + 1) *
+		SyncLoss (== 1) *
+		ViterbiLoss (==1)
+		*/
+	switch (constellation) {
+	case DRX_CONSTELLATION_QAM16:
+		fecBitsDesired = 4 * symbolRate;
+		break;
+	case DRX_CONSTELLATION_QAM32:
+		fecBitsDesired = 5 * symbolRate;
+		break;
+	case DRX_CONSTELLATION_QAM64:
+		fecBitsDesired = 6 * symbolRate;
+		break;
+	case DRX_CONSTELLATION_QAM128:
+		fecBitsDesired = 7 * symbolRate;
+		break;
+	case DRX_CONSTELLATION_QAM256:
+		fecBitsDesired = 8 * symbolRate;
+		break;
+	default:
+		status = -EINVAL;
+	}
+	if (status < 0)
+		goto error;
+
+	fecBitsDesired /= 1000;	/* symbolRate [Hz] -> symbolRate [kHz]  */
+	fecBitsDesired *= 500;	/* meas. period [ms] */
+
+	/* Annex A/C: bits/RsPeriod = 204 * 8 = 1632 */
+	/* fecRsPeriodTotal = fecBitsDesired / 1632 */
+	fecRsPeriodTotal = (fecBitsDesired / 1632UL) + 1;	/* roughly ceil */
+
+	/* fecRsPeriodTotal =  fecRsPrescale * fecRsPeriod  */
+	fecRsPrescale = 1 + (u16) (fecRsPeriodTotal >> 16);
+	if (fecRsPrescale == 0) {
+		/* Divide by zero (though impossible) */
+		status = -EINVAL;
+		if (status < 0)
+			goto error;
+	}
+	fecRsPeriod =
+		((u16) fecRsPeriodTotal +
+		(fecRsPrescale >> 1)) / fecRsPrescale;
+
+	/* write corresponding registers */
+	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, fecRsPeriod);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, fecRsPrescale);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_SNC_FAIL_PERIOD__A, fecRsPeriod);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SetQAM16(struct drxk_state *state)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+	/* QAM Equalizer Setup */
+	/* Equalizer */
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13517);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 13517);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 13517);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13517);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13517);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 13517);
+	if (status < 0)
+		goto error;
+	/* Decision Feedback Equalizer */
+	status = write16(state, QAM_DQ_QUAL_FUN0__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN1__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN2__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN3__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN4__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
+	if (status < 0)
+		goto error;
+
+	/* QAM Slicer Settings */
+	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM16);
+	if (status < 0)
+		goto error;
+
+	/* QAM Loop Controller Coeficients */
+	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 32);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM State Machine (FSM) Thresholds */
+
+	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 140);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 95);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 120);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 230);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 105);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 24);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM FSM Tracking Parameters */
+
+	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 220);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 25);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -65);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -127);
+	if (status < 0)
+		goto error;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief QAM32 specific setup
+* \param demod instance of demod.
+* \return DRXStatus_t.
+*/
+static int SetQAM32(struct drxk_state *state)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+
+	/* QAM Equalizer Setup */
+	/* Equalizer */
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6707);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6707);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6707);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6707);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6707);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 6707);
+	if (status < 0)
+		goto error;
+
+	/* Decision Feedback Equalizer */
+	status = write16(state, QAM_DQ_QUAL_FUN0__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN1__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN2__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN3__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN4__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_SY_SYNC_HWM__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_AWM__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
+	if (status < 0)
+		goto error;
+
+	/* QAM Slicer Settings */
+
+	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM32);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM Loop Controller Coeficients */
+
+	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM State Machine (FSM) Thresholds */
+
+	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 90);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 170);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 10);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM FSM Tracking Parameters */
+
+	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 140);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) -8);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) -16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -26);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -56);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -86);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief QAM64 specific setup
+* \param demod instance of demod.
+* \return DRXStatus_t.
+*/
+static int SetQAM64(struct drxk_state *state)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+	/* QAM Equalizer Setup */
+	/* Equalizer */
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13336);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12618);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 11988);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13809);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13809);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15609);
+	if (status < 0)
+		goto error;
+
+	/* Decision Feedback Equalizer */
+	status = write16(state, QAM_DQ_QUAL_FUN0__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN1__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN2__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN3__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN4__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
+	if (status < 0)
+		goto error;
+
+	/* QAM Slicer Settings */
+	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM64);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM Loop Controller Coeficients */
+
+	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 30);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 100);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 30);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM State Machine (FSM) Thresholds */
+
+	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 100);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 110);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 200);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 95);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 15);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM FSM Tracking Parameters */
+
+	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 141);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 7);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -45);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -80);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief QAM128 specific setup
+* \param demod: instance of demod.
+* \return DRXStatus_t.
+*/
+static int SetQAM128(struct drxk_state *state)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+	/* QAM Equalizer Setup */
+	/* Equalizer */
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6564);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6598);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6394);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6409);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6656);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 7238);
+	if (status < 0)
+		goto error;
+
+	/* Decision Feedback Equalizer */
+	status = write16(state, QAM_DQ_QUAL_FUN0__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN1__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN2__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN3__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN4__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_SY_SYNC_HWM__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_AWM__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM Slicer Settings */
+
+	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM128);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM Loop Controller Coeficients */
+
+	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 120);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 60);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 64);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM State Machine (FSM) Thresholds */
+
+	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 140);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 5);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12);
+	if (status < 0)
+		goto error;
+
+	/* QAM FSM Tracking Parameters */
+
+	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 65);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -1);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -23);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief QAM256 specific setup
+* \param demod: instance of demod.
+* \return DRXStatus_t.
+*/
+static int SetQAM256(struct drxk_state *state)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+	/* QAM Equalizer Setup */
+	/* Equalizer */
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 11502);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12084);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 12543);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 12931);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13629);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15385);
+	if (status < 0)
+		goto error;
+
+	/* Decision Feedback Equalizer */
+	status = write16(state, QAM_DQ_QUAL_FUN0__A, 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN1__A, 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN2__A, 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN3__A, 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN4__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
+	if (status < 0)
+		goto error;
+
+	/* QAM Slicer Settings */
+
+	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM256);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM Loop Controller Coeficients */
+
+	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 250);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 125);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM State Machine (FSM) Thresholds */
+
+	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 150);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 110);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM FSM Tracking Parameters */
+
+	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 74);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 18);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 13);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) 7);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -8);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+
+/*============================================================================*/
+/**
+* \brief Reset QAM block.
+* \param demod:   instance of demod.
+* \param channel: pointer to channel data.
+* \return DRXStatus_t.
+*/
+static int QAMResetQAM(struct drxk_state *state)
+{
+	int status;
+	u16 cmdResult;
+
+	dprintk(1, "\n");
+	/* Stop QAM comstate->m_exec */
+	status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief Set QAM symbolrate.
+* \param demod:   instance of demod.
+* \param channel: pointer to channel data.
+* \return DRXStatus_t.
+*/
+static int QAMSetSymbolrate(struct drxk_state *state)
+{
+	u32 adcFrequency = 0;
+	u32 symbFreq = 0;
+	u32 iqmRcRate = 0;
+	u16 ratesel = 0;
+	u32 lcSymbRate = 0;
+	int status;
+
+	dprintk(1, "\n");
+	/* Select & calculate correct IQM rate */
+	adcFrequency = (state->m_sysClockFreq * 1000) / 3;
+	ratesel = 0;
+	/* printk(KERN_DEBUG "drxk: SR %d\n", state->param.u.qam.symbol_rate); */
+	if (state->param.u.qam.symbol_rate <= 1188750)
+		ratesel = 3;
+	else if (state->param.u.qam.symbol_rate <= 2377500)
+		ratesel = 2;
+	else if (state->param.u.qam.symbol_rate <= 4755000)
+		ratesel = 1;
+	status = write16(state, IQM_FD_RATESEL__A, ratesel);
+	if (status < 0)
+		goto error;
+
+	/*
+		IqmRcRate = ((Fadc / (symbolrate * (4<<ratesel))) - 1) * (1<<23)
+		*/
+	symbFreq = state->param.u.qam.symbol_rate * (1 << ratesel);
+	if (symbFreq == 0) {
+		/* Divide by zero */
+		status = -EINVAL;
+		goto error;
+	}
+	iqmRcRate = (adcFrequency / symbFreq) * (1 << 21) +
+		(Frac28a((adcFrequency % symbFreq), symbFreq) >> 7) -
+		(1 << 23);
+	status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRate);
+	if (status < 0)
+		goto error;
+	state->m_iqmRcRate = iqmRcRate;
+	/*
+		LcSymbFreq = round (.125 *  symbolrate / adcFreq * (1<<15))
+		*/
+	symbFreq = state->param.u.qam.symbol_rate;
+	if (adcFrequency == 0) {
+		/* Divide by zero */
+		status = -EINVAL;
+		goto error;
+	}
+	lcSymbRate = (symbFreq / adcFrequency) * (1 << 12) +
+		(Frac28a((symbFreq % adcFrequency), adcFrequency) >>
+		16);
+	if (lcSymbRate > 511)
+		lcSymbRate = 511;
+	status = write16(state, QAM_LC_SYMBOL_FREQ__A, (u16) lcSymbRate);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief Get QAM lock status.
+* \param demod:   instance of demod.
+* \param channel: pointer to channel data.
+* \return DRXStatus_t.
+*/
+
+static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus)
+{
+	int status;
+	u16 Result[2] = { 0, 0 };
+
+	dprintk(1, "\n");
+	*pLockStatus = NOT_LOCKED;
+	status = scu_command(state,
+			SCU_RAM_COMMAND_STANDARD_QAM |
+			SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK, 0, NULL, 2,
+			Result);
+	if (status < 0)
+		printk(KERN_ERR "drxk: %s status = %08x\n", __func__, status);
+
+	if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED) {
+		/* 0x0000 NOT LOCKED */
+	} else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_LOCKED) {
+		/* 0x4000 DEMOD LOCKED */
+		*pLockStatus = DEMOD_LOCK;
+	} else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK) {
+		/* 0x8000 DEMOD + FEC LOCKED (system lock) */
+		*pLockStatus = MPEG_LOCK;
+	} else {
+		/* 0xC000 NEVER LOCKED */
+		/* (system will never be able to lock to the signal) */
+		/* TODO: check this, intermediate & standard specific lock states are not
+		   taken into account here */
+		*pLockStatus = NEVER_LOCK;
+	}
+	return status;
+}
+
+#define QAM_MIRROR__M         0x03
+#define QAM_MIRROR_NORMAL     0x00
+#define QAM_MIRRORED          0x01
+#define QAM_MIRROR_AUTO_ON    0x02
+#define QAM_LOCKRANGE__M      0x10
+#define QAM_LOCKRANGE_NORMAL  0x10
+
+static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz,
+		  s32 tunerFreqOffset)
+{
+	int status;
+	u16 setParamParameters[4] = { 0, 0, 0, 0 };
+	u16 cmdResult;
+
+	dprintk(1, "\n");
+	/*
+	 * STEP 1: reset demodulator
+	 *	resets FEC DI and FEC RS
+	 *	resets QAM block
+	 *	resets SCU variables
+	 */
+	status = write16(state, FEC_DI_COMM_EXEC__A, FEC_DI_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_RS_COMM_EXEC__A, FEC_RS_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = QAMResetQAM(state);
+	if (status < 0)
+		goto error;
+
+	/*
+	 * STEP 2: configure demodulator
+	 *	-set params; resets IQM,QAM,FEC HW; initializes some
+	 *       SCU variables
+	 */
+	status = QAMSetSymbolrate(state);
+	if (status < 0)
+		goto error;
+
+	/* Set params */
+	switch (state->param.u.qam.modulation) {
+	case QAM_256:
+		state->m_Constellation = DRX_CONSTELLATION_QAM256;
+		break;
+	case QAM_AUTO:
+	case QAM_64:
+		state->m_Constellation = DRX_CONSTELLATION_QAM64;
+		break;
+	case QAM_16:
+		state->m_Constellation = DRX_CONSTELLATION_QAM16;
+		break;
+	case QAM_32:
+		state->m_Constellation = DRX_CONSTELLATION_QAM32;
+		break;
+	case QAM_128:
+		state->m_Constellation = DRX_CONSTELLATION_QAM128;
+		break;
+	default:
+		status = -EINVAL;
+		break;
+	}
+	if (status < 0)
+		goto error;
+	setParamParameters[0] = state->m_Constellation;	/* constellation     */
+	setParamParameters[1] = DRXK_QAM_I12_J17;	/* interleave mode   */
+	if (state->m_OperationMode == OM_QAM_ITU_C)
+		setParamParameters[2] = QAM_TOP_ANNEX_C;
+	else
+		setParamParameters[2] = QAM_TOP_ANNEX_A;
+	setParamParameters[3] |= (QAM_MIRROR_AUTO_ON);
+	/* Env parameters */
+	/* check for LOCKRANGE Extented */
+	/* setParamParameters[3] |= QAM_LOCKRANGE_NORMAL; */
+
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 4, setParamParameters, 1, &cmdResult);
+	if (status < 0) {
+		/* Fall-back to the simpler call */
+		if (state->m_OperationMode == OM_QAM_ITU_C)
+			setParamParameters[0] = QAM_TOP_ANNEX_C;
+		else
+			setParamParameters[0] = QAM_TOP_ANNEX_A;
+		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 1, setParamParameters, 1, &cmdResult);
+		if (status < 0)
+			goto error;
+
+		setParamParameters[0] = state->m_Constellation; /* constellation     */
+		setParamParameters[1] = DRXK_QAM_I12_J17;       /* interleave mode   */
+		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 2, setParamParameters, 1, &cmdResult);
+	}
+	if (status < 0)
+		goto error;
+
+	/*
+	 * STEP 3: enable the system in a mode where the ADC provides valid
+	 * signal setup constellation independent registers
+	 */
+#if 0
+	status = SetFrequency(channel, tunerFreqOffset));
+	if (status < 0)
+		goto error;
+#endif
+	status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true);
+	if (status < 0)
+		goto error;
+
+	/* Setup BER measurement */
+	status = SetQAMMeasurement(state, state->m_Constellation, state->param.u. qam.symbol_rate);
+	if (status < 0)
+		goto error;
+
+	/* Reset default values */
+	status = write16(state, IQM_CF_SCALE_SH__A, IQM_CF_SCALE_SH__PRE);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_TIMEOUT__A, QAM_SY_TIMEOUT__PRE);
+	if (status < 0)
+		goto error;
+
+	/* Reset default LC values */
+	status = write16(state, QAM_LC_RATE_LIMIT__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_LPF_FACTORP__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_LPF_FACTORI__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_MODE__A, 7);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_LC_QUAL_TAB0__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB1__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB2__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB3__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB4__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB5__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB6__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB8__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB9__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB10__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB12__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB15__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB16__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB20__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB25__A, 4);
+	if (status < 0)
+		goto error;
+
+	/* Mirroring, QAM-block starting point not inverted */
+	status = write16(state, QAM_SY_SP_INV__A, QAM_SY_SP_INV_SPECTRUM_INV_DIS);
+	if (status < 0)
+		goto error;
+
+	/* Halt SCU to enable safe non-atomic accesses */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
+	if (status < 0)
+		goto error;
+
+	/* STEP 4: constellation specific setup */
+	switch (state->param.u.qam.modulation) {
+	case QAM_16:
+		status = SetQAM16(state);
+		break;
+	case QAM_32:
+		status = SetQAM32(state);
+		break;
+	case QAM_AUTO:
+	case QAM_64:
+		status = SetQAM64(state);
+		break;
+	case QAM_128:
+		status = SetQAM128(state);
+		break;
+	case QAM_256:
+		status = SetQAM256(state);
+		break;
+	default:
+		status = -EINVAL;
+		break;
+	}
+	if (status < 0)
+		goto error;
+
+	/* Activate SCU to enable SCU commands */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+
+	/* Re-configure MPEG output, requires knowledge of channel bitrate */
+	/* extAttr->currentChannel.constellation = channel->constellation; */
+	/* extAttr->currentChannel.symbolrate    = channel->symbolrate; */
+	status = MPEGTSDtoSetup(state, state->m_OperationMode);
+	if (status < 0)
+		goto error;
+
+	/* Start processes */
+	status = MPEGTSStart(state);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE);
+	if (status < 0)
+		goto error;
+
+	/* STEP 5: start QAM demodulator (starts FEC, QAM and IQM HW) */
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult);
+	if (status < 0)
+		goto error;
+
+	/* update global DRXK data container */
+/*?     extAttr->qamInterleaveMode = DRXK_QAM_I12_J17; */
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SetQAMStandard(struct drxk_state *state,
+			  enum OperationMode oMode)
+{
+	int status;
+#ifdef DRXK_QAM_TAPS
+#define DRXK_QAMA_TAPS_SELECT
+#include "drxk_filters.h"
+#undef DRXK_QAMA_TAPS_SELECT
+#endif
+
+	dprintk(1, "\n");
+
+	/* added antenna switch */
+	SwitchAntennaToQAM(state);
+
+	/* Ensure correct power-up mode */
+	status = PowerUpQAM(state);
+	if (status < 0)
+		goto error;
+	/* Reset QAM block */
+	status = QAMResetQAM(state);
+	if (status < 0)
+		goto error;
+
+	/* Setup IQM */
+
+	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC);
+	if (status < 0)
+		goto error;
+
+	/* Upload IQM Channel Filter settings by
+		boot loader from ROM table */
+	switch (oMode) {
+	case OM_QAM_ITU_A:
+		status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_ITU_A, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
+		break;
+	case OM_QAM_ITU_C:
+		status = BLDirectCmd(state, IQM_CF_TAP_RE0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
+		if (status < 0)
+			goto error;
+		status = BLDirectCmd(state, IQM_CF_TAP_IM0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
+		break;
+	default:
+		status = -EINVAL;
+	}
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_CF_OUT_ENA__A, (1 << IQM_CF_OUT_ENA_QAM__B));
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_SYMMETRIC__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_MIDTAP__A, ((1 << IQM_CF_MIDTAP_RE__B) | (1 << IQM_CF_MIDTAP_IM__B)));
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_RC_STRETCH__A, 21);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_CLP_LEN__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_CLP_TH__A, 448);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_SNS_LEN__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_POW_MEAS_LEN__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_FS_ADJ_SEL__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_RC_ADJ_SEL__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_ADJ_SEL__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_UPD_SEL__A, 0);
+	if (status < 0)
+		goto error;
+
+	/* IQM Impulse Noise Processing Unit */
+	status = write16(state, IQM_CF_CLP_VAL__A, 500);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_DATATH__A, 1000);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_BYPASSDET__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_DET_LCT__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_WND_LEN__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_PKDTH__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_INC_BYPASS__A, 1);
+	if (status < 0)
+		goto error;
+
+	/* turn on IQMAF. Must be done before setAgc**() */
+	status = SetIqmAf(state, true);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_START_LOCK__A, 0x01);
+	if (status < 0)
+		goto error;
+
+	/* IQM will not be reset from here, sync ADC and update/init AGC */
+	status = ADCSynchronization(state);
+	if (status < 0)
+		goto error;
+
+	/* Set the FSM step period */
+	status = write16(state, SCU_RAM_QAM_FSM_STEP_PERIOD__A, 2000);
+	if (status < 0)
+		goto error;
+
+	/* Halt SCU to enable safe non-atomic accesses */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
+	if (status < 0)
+		goto error;
+
+	/* No more resets of the IQM, current standard correctly set =>
+		now AGCs can be configured. */
+
+	status = InitAGC(state, true);
+	if (status < 0)
+		goto error;
+	status = SetPreSaw(state, &(state->m_qamPreSawCfg));
+	if (status < 0)
+		goto error;
+
+	/* Configure AGC's */
+	status = SetAgcRf(state, &(state->m_qamRfAgcCfg), true);
+	if (status < 0)
+		goto error;
+	status = SetAgcIf(state, &(state->m_qamIfAgcCfg), true);
+	if (status < 0)
+		goto error;
+
+	/* Activate SCU to enable SCU commands */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int WriteGPIO(struct drxk_state *state)
+{
+	int status;
+	u16 value = 0;
+
+	dprintk(1, "\n");
+	/* stop lock indicator process */
+	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+	if (status < 0)
+		goto error;
+
+	/*  Write magic word to enable pdr reg write               */
+	status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
+	if (status < 0)
+		goto error;
+
+	if (state->m_hasSAWSW) {
+		if (state->UIO_mask & 0x0001) { /* UIO-1 */
+			/* write to io pad configuration register - output mode */
+			status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg);
+			if (status < 0)
+				goto error;
+
+			/* use corresponding bit in io data output registar */
+			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
+			if (status < 0)
+				goto error;
+			if ((state->m_GPIO & 0x0001) == 0)
+				value &= 0x7FFF;	/* write zero to 15th bit - 1st UIO */
+			else
+				value |= 0x8000;	/* write one to 15th bit - 1st UIO */
+			/* write back to io data output register */
+			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
+			if (status < 0)
+				goto error;
+		}
+		if (state->UIO_mask & 0x0002) { /* UIO-2 */
+			/* write to io pad configuration register - output mode */
+			status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg);
+			if (status < 0)
+				goto error;
+
+			/* use corresponding bit in io data output registar */
+			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
+			if (status < 0)
+				goto error;
+			if ((state->m_GPIO & 0x0002) == 0)
+				value &= 0xBFFF;	/* write zero to 14th bit - 2st UIO */
+			else
+				value |= 0x4000;	/* write one to 14th bit - 2st UIO */
+			/* write back to io data output register */
+			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
+			if (status < 0)
+				goto error;
+		}
+		if (state->UIO_mask & 0x0004) { /* UIO-3 */
+			/* write to io pad configuration register - output mode */
+			status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg);
+			if (status < 0)
+				goto error;
+
+			/* use corresponding bit in io data output registar */
+			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
+			if (status < 0)
+				goto error;
+			if ((state->m_GPIO & 0x0004) == 0)
+				value &= 0xFFFB;            /* write zero to 2nd bit - 3rd UIO */
+			else
+				value |= 0x0004;            /* write one to 2nd bit - 3rd UIO */
+			/* write back to io data output register */
+			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
+			if (status < 0)
+				goto error;
+		}
+	}
+	/*  Write magic word to disable pdr reg write               */
+	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SwitchAntennaToQAM(struct drxk_state *state)
+{
+	int status = 0;
+	bool gpio_state;
+
+	dprintk(1, "\n");
+
+	if (!state->antenna_gpio)
+		return 0;
+
+	gpio_state = state->m_GPIO & state->antenna_gpio;
+
+	if (state->antenna_dvbt ^ gpio_state) {
+		/* Antenna is on DVB-T mode. Switch */
+		if (state->antenna_dvbt)
+			state->m_GPIO &= ~state->antenna_gpio;
+		else
+			state->m_GPIO |= state->antenna_gpio;
+		status = WriteGPIO(state);
+	}
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SwitchAntennaToDVBT(struct drxk_state *state)
+{
+	int status = 0;
+	bool gpio_state;
+
+	dprintk(1, "\n");
+
+	if (!state->antenna_gpio)
+		return 0;
+
+	gpio_state = state->m_GPIO & state->antenna_gpio;
+
+	if (!(state->antenna_dvbt ^ gpio_state)) {
+		/* Antenna is on DVB-C mode. Switch */
+		if (state->antenna_dvbt)
+			state->m_GPIO |= state->antenna_gpio;
+		else
+			state->m_GPIO &= ~state->antenna_gpio;
+		status = WriteGPIO(state);
+	}
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+
+static int PowerDownDevice(struct drxk_state *state)
+{
+	/* Power down to requested mode */
+	/* Backup some register settings */
+	/* Set pins with possible pull-ups connected to them in input mode */
+	/* Analog power down */
+	/* ADC power down */
+	/* Power down device */
+	int status;
+
+	dprintk(1, "\n");
+	if (state->m_bPDownOpenBridge) {
+		/* Open I2C bridge before power down of DRXK */
+		status = ConfigureI2CBridge(state, true);
+		if (status < 0)
+			goto error;
+	}
+	/* driver 0.9.0 */
+	status = DVBTEnableOFDMTokenRing(state, false);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_CLOCK);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
+	if (status < 0)
+		goto error;
+	state->m_HICfgCtrl |= SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
+	status = HI_CfgCommand(state);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int load_microcode(struct drxk_state *state, const char *mc_name)
+{
+	const struct firmware *fw = NULL;
+	int err = 0;
+
+	dprintk(1, "\n");
+
+	err = request_firmware(&fw, mc_name, state->i2c->dev.parent);
+	if (err < 0) {
+		printk(KERN_ERR
+		       "drxk: Could not load firmware file %s.\n", mc_name);
+		printk(KERN_INFO
+		       "drxk: Copy %s to your hotplug directory!\n", mc_name);
+		return err;
+	}
+	err = DownloadMicrocode(state, fw->data, fw->size);
+	release_firmware(fw);
+	return err;
+}
+
+static int init_drxk(struct drxk_state *state)
+{
+	int status = 0;
+	enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM;
+	u16 driverVersion;
+
+	dprintk(1, "\n");
+	if ((state->m_DrxkState == DRXK_UNINITIALIZED)) {
+		status = PowerUpDevice(state);
+		if (status < 0)
+			goto error;
+		status = DRXX_Open(state);
+		if (status < 0)
+			goto error;
+		/* Soft reset of OFDM-, sys- and osc-clockdomain */
+		status = write16(state, SIO_CC_SOFT_RST__A, SIO_CC_SOFT_RST_OFDM__M | SIO_CC_SOFT_RST_SYS__M | SIO_CC_SOFT_RST_OSC__M);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
+		if (status < 0)
+			goto error;
+		/* TODO is this needed, if yes how much delay in worst case scenario */
+		msleep(1);
+		state->m_DRXK_A3_PATCH_CODE = true;
+		status = GetDeviceCapabilities(state);
+		if (status < 0)
+			goto error;
+
+		/* Bridge delay, uses oscilator clock */
+		/* Delay = (delay (nano seconds) * oscclk (kHz))/ 1000 */
+		/* SDA brdige delay */
+		state->m_HICfgBridgeDelay =
+			(u16) ((state->m_oscClockFreq / 1000) *
+				HI_I2C_BRIDGE_DELAY) / 1000;
+		/* Clipping */
+		if (state->m_HICfgBridgeDelay >
+			SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M) {
+			state->m_HICfgBridgeDelay =
+				SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M;
+		}
+		/* SCL bridge delay, same as SDA for now */
+		state->m_HICfgBridgeDelay +=
+			state->m_HICfgBridgeDelay <<
+			SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B;
+
+		status = InitHI(state);
+		if (status < 0)
+			goto error;
+		/* disable various processes */
+#if NOA1ROM
+		if (!(state->m_DRXK_A1_ROM_CODE)
+			&& !(state->m_DRXK_A2_ROM_CODE))
+#endif
+		{
+			status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+			if (status < 0)
+				goto error;
+		}
+
+		/* disable MPEG port */
+		status = MPEGTSDisable(state);
+		if (status < 0)
+			goto error;
+
+		/* Stop AUD and SCU */
+		status = write16(state, AUD_COMM_EXEC__A, AUD_COMM_EXEC_STOP);
+		if (status < 0)
+			goto error;
+		status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_STOP);
+		if (status < 0)
+			goto error;
+
+		/* enable token-ring bus through OFDM block for possible ucode upload */
+		status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_ON);
+		if (status < 0)
+			goto error;
+
+		/* include boot loader section */
+		status = write16(state, SIO_BL_COMM_EXEC__A, SIO_BL_COMM_EXEC_ACTIVE);
+		if (status < 0)
+			goto error;
+		status = BLChainCmd(state, 0, 6, 100);
+		if (status < 0)
+			goto error;
+
+		if (!state->microcode_name)
+			load_microcode(state, "drxk_a3.mc");
+		else
+			load_microcode(state, state->microcode_name);
+
+		/* disable token-ring bus through OFDM block for possible ucode upload */
+		status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_OFF);
+		if (status < 0)
+			goto error;
+
+		/* Run SCU for a little while to initialize microcode version numbers */
+		status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
+		if (status < 0)
+			goto error;
+		status = DRXX_Open(state);
+		if (status < 0)
+			goto error;
+		/* added for test */
+		msleep(30);
+
+		powerMode = DRXK_POWER_DOWN_OFDM;
+		status = CtrlPowerMode(state, &powerMode);
+		if (status < 0)
+			goto error;
+
+		/* Stamp driver version number in SCU data RAM in BCD code
+			Done to enable field application engineers to retreive drxdriver version
+			via I2C from SCU RAM.
+			Not using SCU command interface for SCU register access since no
+			microcode may be present.
+			*/
+		driverVersion =
+			(((DRXK_VERSION_MAJOR / 100) % 10) << 12) +
+			(((DRXK_VERSION_MAJOR / 10) % 10) << 8) +
+			((DRXK_VERSION_MAJOR % 10) << 4) +
+			(DRXK_VERSION_MINOR % 10);
+		status = write16(state, SCU_RAM_DRIVER_VER_HI__A, driverVersion);
+		if (status < 0)
+			goto error;
+		driverVersion =
+			(((DRXK_VERSION_PATCH / 1000) % 10) << 12) +
+			(((DRXK_VERSION_PATCH / 100) % 10) << 8) +
+			(((DRXK_VERSION_PATCH / 10) % 10) << 4) +
+			(DRXK_VERSION_PATCH % 10);
+		status = write16(state, SCU_RAM_DRIVER_VER_LO__A, driverVersion);
+		if (status < 0)
+			goto error;
+
+		printk(KERN_INFO "DRXK driver version %d.%d.%d\n",
+			DRXK_VERSION_MAJOR, DRXK_VERSION_MINOR,
+			DRXK_VERSION_PATCH);
+
+		/* Dirty fix of default values for ROM/PATCH microcode
+			Dirty because this fix makes it impossible to setup suitable values
+			before calling DRX_Open. This solution requires changes to RF AGC speed
+			to be done via the CTRL function after calling DRX_Open */
+
+		/* m_dvbtRfAgcCfg.speed = 3; */
+
+		/* Reset driver debug flags to 0 */
+		status = write16(state, SCU_RAM_DRIVER_DEBUG__A, 0);
+		if (status < 0)
+			goto error;
+		/* driver 0.9.0 */
+		/* Setup FEC OC:
+			NOTE: No more full FEC resets allowed afterwards!! */
+		status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP);
+		if (status < 0)
+			goto error;
+		/* MPEGTS functions are still the same */
+		status = MPEGTSDtoInit(state);
+		if (status < 0)
+			goto error;
+		status = MPEGTSStop(state);
+		if (status < 0)
+			goto error;
+		status = MPEGTSConfigurePolarity(state);
+		if (status < 0)
+			goto error;
+		status = MPEGTSConfigurePins(state, state->m_enableMPEGOutput);
+		if (status < 0)
+			goto error;
+		/* added: configure GPIO */
+		status = WriteGPIO(state);
+		if (status < 0)
+			goto error;
+
+		state->m_DrxkState = DRXK_STOPPED;
+
+		if (state->m_bPowerDown) {
+			status = PowerDownDevice(state);
+			if (status < 0)
+				goto error;
+			state->m_DrxkState = DRXK_POWERED_DOWN;
+		} else
+			state->m_DrxkState = DRXK_STOPPED;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static void drxk_c_release(struct dvb_frontend *fe)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "\n");
+	kfree(state);
+}
+
+static int drxk_c_init(struct dvb_frontend *fe)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "\n");
+	if (mutex_trylock(&state->ctlock) == 0)
+		return -EBUSY;
+	SetOperationMode(state, OM_QAM_ITU_A);
+	return 0;
+}
+
+static int drxk_c_sleep(struct dvb_frontend *fe)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "\n");
+	ShutDown(state);
+	mutex_unlock(&state->ctlock);
+	return 0;
+}
+
+static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "%s\n", enable ? "enable" : "disable");
+	return ConfigureI2CBridge(state, enable ? true : false);
+}
+
+static int drxk_set_parameters(struct dvb_frontend *fe,
+			       struct dvb_frontend_parameters *p)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+	u32 IF;
+
+	dprintk(1, "\n");
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe, p);
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+	state->param = *p;
+	fe->ops.tuner_ops.get_frequency(fe, &IF);
+	Start(state, 0, IF);
+
+	/* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */
+
+	return 0;
+}
+
+static int drxk_c_get_frontend(struct dvb_frontend *fe,
+			       struct dvb_frontend_parameters *p)
+{
+	dprintk(1, "\n");
+	return 0;
+}
+
+static int drxk_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+	u32 stat;
+
+	dprintk(1, "\n");
+	*status = 0;
+	GetLockStatus(state, &stat, 0);
+	if (stat == MPEG_LOCK)
+		*status |= 0x1f;
+	if (stat == FEC_LOCK)
+		*status |= 0x0f;
+	if (stat == DEMOD_LOCK)
+		*status |= 0x07;
+	return 0;
+}
+
+static int drxk_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	dprintk(1, "\n");
+
+	*ber = 0;
+	return 0;
+}
+
+static int drxk_read_signal_strength(struct dvb_frontend *fe,
+				     u16 *strength)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+	u32 val = 0;
+
+	dprintk(1, "\n");
+	ReadIFAgc(state, &val);
+	*strength = val & 0xffff;
+	return 0;
+}
+
+static int drxk_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+	s32 snr2;
+
+	dprintk(1, "\n");
+	GetSignalToNoise(state, &snr2);
+	*snr = snr2 & 0xffff;
+	return 0;
+}
+
+static int drxk_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+	u16 err;
+
+	dprintk(1, "\n");
+	DVBTQAMGetAccPktErr(state, &err);
+	*ucblocks = (u32) err;
+	return 0;
+}
+
+static int drxk_c_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings
+				    *sets)
+{
+	dprintk(1, "\n");
+	sets->min_delay_ms = 3000;
+	sets->max_drift = 0;
+	sets->step_size = 0;
+	return 0;
+}
+
+static void drxk_t_release(struct dvb_frontend *fe)
+{
+	/*
+	 * There's nothing to release here, as the state struct
+	 * is already freed by drxk_c_release.
+	 */
+}
+
+static int drxk_t_init(struct dvb_frontend *fe)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "\n");
+	if (mutex_trylock(&state->ctlock) == 0)
+		return -EBUSY;
+	SetOperationMode(state, OM_DVBT);
+	return 0;
+}
+
+static int drxk_t_sleep(struct dvb_frontend *fe)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "\n");
+	mutex_unlock(&state->ctlock);
+	return 0;
+}
+
+static int drxk_t_get_frontend(struct dvb_frontend *fe,
+			       struct dvb_frontend_parameters *p)
+{
+	dprintk(1, "\n");
+
+	return 0;
+}
+
+static struct dvb_frontend_ops drxk_c_ops = {
+	.info = {
+		 .name = "DRXK DVB-C",
+		 .type = FE_QAM,
+		 .frequency_stepsize = 62500,
+		 .frequency_min = 47000000,
+		 .frequency_max = 862000000,
+		 .symbol_rate_min = 870000,
+		 .symbol_rate_max = 11700000,
+		 .caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
+		 FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO},
+	.release = drxk_c_release,
+	.init = drxk_c_init,
+	.sleep = drxk_c_sleep,
+	.i2c_gate_ctrl = drxk_gate_ctrl,
+
+	.set_frontend = drxk_set_parameters,
+	.get_frontend = drxk_c_get_frontend,
+	.get_tune_settings = drxk_c_get_tune_settings,
+
+	.read_status = drxk_read_status,
+	.read_ber = drxk_read_ber,
+	.read_signal_strength = drxk_read_signal_strength,
+	.read_snr = drxk_read_snr,
+	.read_ucblocks = drxk_read_ucblocks,
+};
+
+static struct dvb_frontend_ops drxk_t_ops = {
+	.info = {
+		 .name = "DRXK DVB-T",
+		 .type = FE_OFDM,
+		 .frequency_min = 47125000,
+		 .frequency_max = 865000000,
+		 .frequency_stepsize = 166667,
+		 .frequency_tolerance = 0,
+		 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
+		 FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
+		 FE_CAN_FEC_AUTO |
+		 FE_CAN_QAM_16 | FE_CAN_QAM_64 |
+		 FE_CAN_QAM_AUTO |
+		 FE_CAN_TRANSMISSION_MODE_AUTO |
+		 FE_CAN_GUARD_INTERVAL_AUTO |
+		 FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | FE_CAN_MUTE_TS},
+	.release = drxk_t_release,
+	.init = drxk_t_init,
+	.sleep = drxk_t_sleep,
+	.i2c_gate_ctrl = drxk_gate_ctrl,
+
+	.set_frontend = drxk_set_parameters,
+	.get_frontend = drxk_t_get_frontend,
+
+	.read_status = drxk_read_status,
+	.read_ber = drxk_read_ber,
+	.read_signal_strength = drxk_read_signal_strength,
+	.read_snr = drxk_read_snr,
+	.read_ucblocks = drxk_read_ucblocks,
+};
+
+struct dvb_frontend *drxk_attach(const struct drxk_config *config,
+				 struct i2c_adapter *i2c,
+				 struct dvb_frontend **fe_t)
+{
+	struct drxk_state *state = NULL;
+	u8 adr = config->adr;
+
+	dprintk(1, "\n");
+	state = kzalloc(sizeof(struct drxk_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	state->i2c = i2c;
+	state->demod_address = adr;
+	state->single_master = config->single_master;
+	state->microcode_name = config->microcode_name;
+	state->no_i2c_bridge = config->no_i2c_bridge;
+	state->antenna_gpio = config->antenna_gpio;
+	state->antenna_dvbt = config->antenna_dvbt;
+
+	/* NOTE: as more UIO bits will be used, add them to the mask */
+	state->UIO_mask = config->antenna_gpio;
+
+	/* Default gpio to DVB-C */
+	if (!state->antenna_dvbt && state->antenna_gpio)
+		state->m_GPIO |= state->antenna_gpio;
+	else
+		state->m_GPIO &= ~state->antenna_gpio;
+
+	mutex_init(&state->mutex);
+	mutex_init(&state->ctlock);
+
+	memcpy(&state->c_frontend.ops, &drxk_c_ops,
+	       sizeof(struct dvb_frontend_ops));
+	memcpy(&state->t_frontend.ops, &drxk_t_ops,
+	       sizeof(struct dvb_frontend_ops));
+	state->c_frontend.demodulator_priv = state;
+	state->t_frontend.demodulator_priv = state;
+
+	init_state(state);
+	if (init_drxk(state) < 0)
+		goto error;
+	*fe_t = &state->t_frontend;
+
+	return &state->c_frontend;
+
+error:
+	printk(KERN_ERR "drxk: not found\n");
+	kfree(state);
+	return NULL;
+}
+EXPORT_SYMBOL(drxk_attach);
+
+MODULE_DESCRIPTION("DRX-K driver");
+MODULE_AUTHOR("Ralph Metzler");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/drxk_hard.h b/drivers/media/dvb/frontends/drxk_hard.h
new file mode 100644
index 0000000..a05c32e
--- /dev/null
+++ b/drivers/media/dvb/frontends/drxk_hard.h
@@ -0,0 +1,348 @@
+#include "drxk_map.h"
+
+#define DRXK_VERSION_MAJOR 0
+#define DRXK_VERSION_MINOR 9
+#define DRXK_VERSION_PATCH 4300
+
+#define HI_I2C_DELAY        42
+#define HI_I2C_BRIDGE_DELAY 350
+#define DRXK_MAX_RETRIES    100
+
+#define DRIVER_4400 1
+
+#define DRXX_JTAGID   0x039210D9
+#define DRXX_J_JTAGID 0x239310D9
+#define DRXX_K_JTAGID 0x039210D9
+
+#define DRX_UNKNOWN     254
+#define DRX_AUTO        255
+
+#define DRX_SCU_READY   0
+#define DRXK_MAX_WAITTIME (200)
+#define SCU_RESULT_OK      0
+#define SCU_RESULT_SIZE   -4
+#define SCU_RESULT_INVPAR -3
+#define SCU_RESULT_UNKSTD -2
+#define SCU_RESULT_UNKCMD -1
+
+#ifndef DRXK_OFDM_TR_SHUTDOWN_TIMEOUT
+#define DRXK_OFDM_TR_SHUTDOWN_TIMEOUT (200)
+#endif
+
+#define DRXK_8VSB_MPEG_BIT_RATE     19392658UL  /*bps*/
+#define DRXK_DVBT_MPEG_BIT_RATE     32000000UL  /*bps*/
+#define DRXK_QAM16_MPEG_BIT_RATE    27000000UL  /*bps*/
+#define DRXK_QAM32_MPEG_BIT_RATE    33000000UL  /*bps*/
+#define DRXK_QAM64_MPEG_BIT_RATE    40000000UL  /*bps*/
+#define DRXK_QAM128_MPEG_BIT_RATE   46000000UL  /*bps*/
+#define DRXK_QAM256_MPEG_BIT_RATE   52000000UL  /*bps*/
+#define DRXK_MAX_MPEG_BIT_RATE      52000000UL  /*bps*/
+
+#define   IQM_CF_OUT_ENA_OFDM__M                                            0x4
+#define     IQM_FS_ADJ_SEL_B_QAM                                            0x1
+#define     IQM_FS_ADJ_SEL_B_OFF                                            0x0
+#define     IQM_FS_ADJ_SEL_B_VSB                                            0x2
+#define     IQM_RC_ADJ_SEL_B_OFF                                            0x0
+#define     IQM_RC_ADJ_SEL_B_QAM                                            0x1
+#define     IQM_RC_ADJ_SEL_B_VSB                                            0x2
+
+enum OperationMode {
+	OM_NONE,
+	OM_QAM_ITU_A,
+	OM_QAM_ITU_B,
+	OM_QAM_ITU_C,
+	OM_DVBT
+};
+
+enum DRXPowerMode {
+	DRX_POWER_UP = 0,
+	DRX_POWER_MODE_1,
+	DRX_POWER_MODE_2,
+	DRX_POWER_MODE_3,
+	DRX_POWER_MODE_4,
+	DRX_POWER_MODE_5,
+	DRX_POWER_MODE_6,
+	DRX_POWER_MODE_7,
+	DRX_POWER_MODE_8,
+
+	DRX_POWER_MODE_9,
+	DRX_POWER_MODE_10,
+	DRX_POWER_MODE_11,
+	DRX_POWER_MODE_12,
+	DRX_POWER_MODE_13,
+	DRX_POWER_MODE_14,
+	DRX_POWER_MODE_15,
+	DRX_POWER_MODE_16,
+	DRX_POWER_DOWN = 255
+};
+
+
+/** /brief Intermediate power mode for DRXK, power down OFDM clock domain */
+#ifndef DRXK_POWER_DOWN_OFDM
+#define DRXK_POWER_DOWN_OFDM        DRX_POWER_MODE_1
+#endif
+
+/** /brief Intermediate power mode for DRXK, power down core (sysclk) */
+#ifndef DRXK_POWER_DOWN_CORE
+#define DRXK_POWER_DOWN_CORE        DRX_POWER_MODE_9
+#endif
+
+/** /brief Intermediate power mode for DRXK, power down pll (only osc runs) */
+#ifndef DRXK_POWER_DOWN_PLL
+#define DRXK_POWER_DOWN_PLL         DRX_POWER_MODE_10
+#endif
+
+
+enum AGC_CTRL_MODE { DRXK_AGC_CTRL_AUTO = 0, DRXK_AGC_CTRL_USER, DRXK_AGC_CTRL_OFF };
+enum EDrxkState { DRXK_UNINITIALIZED = 0, DRXK_STOPPED, DRXK_DTV_STARTED, DRXK_ATV_STARTED, DRXK_POWERED_DOWN };
+enum EDrxkCoefArrayIndex {
+	DRXK_COEF_IDX_MN = 0,
+	DRXK_COEF_IDX_FM    ,
+	DRXK_COEF_IDX_L     ,
+	DRXK_COEF_IDX_LP    ,
+	DRXK_COEF_IDX_BG    ,
+	DRXK_COEF_IDX_DK    ,
+	DRXK_COEF_IDX_I     ,
+	DRXK_COEF_IDX_MAX
+};
+enum EDrxkSifAttenuation {
+	DRXK_SIF_ATTENUATION_0DB,
+	DRXK_SIF_ATTENUATION_3DB,
+	DRXK_SIF_ATTENUATION_6DB,
+	DRXK_SIF_ATTENUATION_9DB
+};
+enum EDrxkConstellation {
+	DRX_CONSTELLATION_BPSK = 0,
+	DRX_CONSTELLATION_QPSK,
+	DRX_CONSTELLATION_PSK8,
+	DRX_CONSTELLATION_QAM16,
+	DRX_CONSTELLATION_QAM32,
+	DRX_CONSTELLATION_QAM64,
+	DRX_CONSTELLATION_QAM128,
+	DRX_CONSTELLATION_QAM256,
+	DRX_CONSTELLATION_QAM512,
+	DRX_CONSTELLATION_QAM1024,
+	DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN,
+	DRX_CONSTELLATION_AUTO    = DRX_AUTO
+};
+enum EDrxkInterleaveMode {
+	DRXK_QAM_I12_J17    = 16,
+	DRXK_QAM_I_UNKNOWN  = DRX_UNKNOWN
+};
+enum {
+	DRXK_SPIN_A1 = 0,
+	DRXK_SPIN_A2,
+	DRXK_SPIN_A3,
+	DRXK_SPIN_UNKNOWN
+};
+
+enum DRXKCfgDvbtSqiSpeed {
+	DRXK_DVBT_SQI_SPEED_FAST = 0,
+	DRXK_DVBT_SQI_SPEED_MEDIUM,
+	DRXK_DVBT_SQI_SPEED_SLOW,
+	DRXK_DVBT_SQI_SPEED_UNKNOWN = DRX_UNKNOWN
+} ;
+
+enum DRXFftmode_t {
+	DRX_FFTMODE_2K = 0,
+	DRX_FFTMODE_4K,
+	DRX_FFTMODE_8K,
+	DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN,
+	DRX_FFTMODE_AUTO    = DRX_AUTO
+};
+
+enum DRXMPEGStrWidth_t {
+	DRX_MPEG_STR_WIDTH_1,
+	DRX_MPEG_STR_WIDTH_8
+};
+
+enum DRXQamLockRange_t {
+	DRX_QAM_LOCKRANGE_NORMAL,
+	DRX_QAM_LOCKRANGE_EXTENDED
+};
+
+struct DRXKCfgDvbtEchoThres_t {
+	u16             threshold;
+	enum DRXFftmode_t      fftMode;
+} ;
+
+struct SCfgAgc {
+	enum AGC_CTRL_MODE     ctrlMode;        /* off, user, auto */
+	u16            outputLevel;     /* range dependent on AGC */
+	u16            minOutputLevel;  /* range dependent on AGC */
+	u16            maxOutputLevel;  /* range dependent on AGC */
+	u16            speed;           /* range dependent on AGC */
+	u16            top;             /* rf-agc take over point */
+	u16            cutOffCurrent;   /* rf-agc is accelerated if output current
+					   is below cut-off current */
+	u16            IngainTgtMax;
+	u16            FastClipCtrlDelay;
+};
+
+struct SCfgPreSaw {
+	u16        reference; /* pre SAW reference value, range 0 .. 31 */
+	bool          usePreSaw; /* TRUE algorithms must use pre SAW sense */
+};
+
+struct DRXKOfdmScCmd_t {
+	u16 cmd;        /**< Command number */
+	u16 subcmd;     /**< Sub-command parameter*/
+	u16 param0;     /**< General purpous param */
+	u16 param1;     /**< General purpous param */
+	u16 param2;     /**< General purpous param */
+	u16 param3;     /**< General purpous param */
+	u16 param4;     /**< General purpous param */
+};
+
+struct drxk_state {
+	struct dvb_frontend c_frontend;
+	struct dvb_frontend t_frontend;
+	struct dvb_frontend_parameters param;
+	struct device *dev;
+
+	struct i2c_adapter *i2c;
+	u8     demod_address;
+	void  *priv;
+
+	struct mutex mutex;
+	struct mutex ctlock;
+
+	u32    m_Instance;           /**< Channel 1,2,3 or 4 */
+
+	int    m_ChunkSize;
+	u8 Chunk[256];
+
+	bool   m_hasLNA;
+	bool   m_hasDVBT;
+	bool   m_hasDVBC;
+	bool   m_hasAudio;
+	bool   m_hasATV;
+	bool   m_hasOOB;
+	bool   m_hasSAWSW;         /**< TRUE if mat_tx is available */
+	bool   m_hasGPIO1;         /**< TRUE if mat_rx is available */
+	bool   m_hasGPIO2;         /**< TRUE if GPIO is available */
+	bool   m_hasIRQN;          /**< TRUE if IRQN is available */
+	u16    m_oscClockFreq;
+	u16    m_HICfgTimingDiv;
+	u16    m_HICfgBridgeDelay;
+	u16    m_HICfgWakeUpKey;
+	u16    m_HICfgTimeout;
+	u16    m_HICfgCtrl;
+	s32    m_sysClockFreq;      /**< system clock frequency in kHz */
+
+	enum EDrxkState    m_DrxkState;      /**< State of Drxk (init,stopped,started) */
+	enum OperationMode m_OperationMode;  /**< digital standards */
+	struct SCfgAgc     m_vsbRfAgcCfg;    /**< settings for VSB RF-AGC */
+	struct SCfgAgc     m_vsbIfAgcCfg;    /**< settings for VSB IF-AGC */
+	u16                m_vsbPgaCfg;      /**< settings for VSB PGA */
+	struct SCfgPreSaw  m_vsbPreSawCfg;   /**< settings for pre SAW sense */
+	s32    m_Quality83percent;  /**< MER level (*0.1 dB) for 83% quality indication */
+	s32    m_Quality93percent;  /**< MER level (*0.1 dB) for 93% quality indication */
+	bool   m_smartAntInverted;
+	bool   m_bDebugEnableBridge;
+	bool   m_bPDownOpenBridge;  /**< only open DRXK bridge before power-down once it has been accessed */
+	bool   m_bPowerDown;        /**< Power down when not used */
+
+	u32    m_IqmFsRateOfs;      /**< frequency shift as written to DRXK register (28bit fixpoint) */
+
+	bool   m_enableMPEGOutput;  /**< If TRUE, enable MPEG output */
+	bool   m_insertRSByte;      /**< If TRUE, insert RS byte */
+	bool   m_enableParallel;    /**< If TRUE, parallel out otherwise serial */
+	bool   m_invertDATA;        /**< If TRUE, invert DATA signals */
+	bool   m_invertERR;         /**< If TRUE, invert ERR signal */
+	bool   m_invertSTR;         /**< If TRUE, invert STR signals */
+	bool   m_invertVAL;         /**< If TRUE, invert VAL signals */
+	bool   m_invertCLK;         /**< If TRUE, invert CLK signals */
+	bool   m_DVBCStaticCLK;
+	bool   m_DVBTStaticCLK;     /**< If TRUE, static MPEG clockrate will
+					 be used, otherwise clockrate will
+					 adapt to the bitrate of the TS */
+	u32    m_DVBTBitrate;
+	u32    m_DVBCBitrate;
+
+	u8     m_TSDataStrength;
+	u8     m_TSClockkStrength;
+
+	enum DRXMPEGStrWidth_t  m_widthSTR;    /**< MPEG start width */
+	u32    m_mpegTsStaticBitrate;          /**< Maximum bitrate in b/s in case
+						    static clockrate is selected */
+
+	/* LARGE_INTEGER   m_StartTime; */     /**< Contains the time of the last demod start */
+	s32    m_MpegLockTimeOut;      /**< WaitForLockStatus Timeout (counts from start time) */
+	s32    m_DemodLockTimeOut;     /**< WaitForLockStatus Timeout (counts from start time) */
+
+	bool   m_disableTEIhandling;
+
+	bool   m_RfAgcPol;
+	bool   m_IfAgcPol;
+
+	struct SCfgAgc    m_atvRfAgcCfg;  /**< settings for ATV RF-AGC */
+	struct SCfgAgc    m_atvIfAgcCfg;  /**< settings for ATV IF-AGC */
+	struct SCfgPreSaw m_atvPreSawCfg; /**< settings for ATV pre SAW sense */
+	bool              m_phaseCorrectionBypass;
+	s16               m_atvTopVidPeak;
+	u16               m_atvTopNoiseTh;
+	enum EDrxkSifAttenuation m_sifAttenuation;
+	bool              m_enableCVBSOutput;
+	bool              m_enableSIFOutput;
+	bool              m_bMirrorFreqSpect;
+	enum EDrxkConstellation  m_Constellation; /**< Constellation type of the channel */
+	u32               m_CurrSymbolRate;       /**< Current QAM symbol rate */
+	struct SCfgAgc    m_qamRfAgcCfg;          /**< settings for QAM RF-AGC */
+	struct SCfgAgc    m_qamIfAgcCfg;          /**< settings for QAM IF-AGC */
+	u16               m_qamPgaCfg;            /**< settings for QAM PGA */
+	struct SCfgPreSaw m_qamPreSawCfg;         /**< settings for QAM pre SAW sense */
+	enum EDrxkInterleaveMode m_qamInterleaveMode; /**< QAM Interleave mode */
+	u16               m_fecRsPlen;
+	u16               m_fecRsPrescale;
+
+	enum DRXKCfgDvbtSqiSpeed m_sqiSpeed;
+
+	u16               m_GPIO;
+	u16               m_GPIOCfg;
+
+	struct SCfgAgc    m_dvbtRfAgcCfg;     /**< settings for QAM RF-AGC */
+	struct SCfgAgc    m_dvbtIfAgcCfg;     /**< settings for QAM IF-AGC */
+	struct SCfgPreSaw m_dvbtPreSawCfg;    /**< settings for QAM pre SAW sense */
+
+	u16               m_agcFastClipCtrlDelay;
+	bool              m_adcCompPassed;
+	u16               m_adcCompCoef[64];
+	u16               m_adcState;
+
+	u8               *m_microcode;
+	int               m_microcode_length;
+	bool              m_DRXK_A1_PATCH_CODE;
+	bool              m_DRXK_A1_ROM_CODE;
+	bool              m_DRXK_A2_ROM_CODE;
+	bool              m_DRXK_A3_ROM_CODE;
+	bool              m_DRXK_A2_PATCH_CODE;
+	bool              m_DRXK_A3_PATCH_CODE;
+
+	bool              m_rfmirror;
+	u8                m_deviceSpin;
+	u32               m_iqmRcRate;
+
+	enum DRXPowerMode m_currentPowerMode;
+
+	/*
+	 * Configurable parameters at the driver. They stores the values found
+	 * at struct drxk_config.
+	 */
+
+	u16	UIO_mask;	/* Bits used by UIO */
+
+	bool	single_master;
+	bool	no_i2c_bridge;
+	bool	antenna_dvbt;
+	u16	antenna_gpio;
+
+	const char *microcode_name;
+};
+
+#define NEVER_LOCK 0
+#define NOT_LOCKED 1
+#define DEMOD_LOCK 2
+#define FEC_LOCK   3
+#define MPEG_LOCK  4
+
diff --git a/drivers/media/dvb/frontends/drxk_map.h b/drivers/media/dvb/frontends/drxk_map.h
new file mode 100644
index 0000000..9b11a83
--- /dev/null
+++ b/drivers/media/dvb/frontends/drxk_map.h
@@ -0,0 +1,449 @@
+#define  AUD_COMM_EXEC__A                                                  0x1000000
+#define    AUD_COMM_EXEC_STOP                                              0x0
+#define  FEC_COMM_EXEC__A                                                  0x1C00000
+#define    FEC_COMM_EXEC_STOP                                              0x0
+#define    FEC_COMM_EXEC_ACTIVE                                            0x1
+#define  FEC_DI_COMM_EXEC__A                                               0x1C20000
+#define    FEC_DI_COMM_EXEC_STOP                                           0x0
+#define  FEC_DI_INPUT_CTL__A                                               0x1C20016
+#define  FEC_RS_COMM_EXEC__A                                               0x1C30000
+#define    FEC_RS_COMM_EXEC_STOP                                           0x0
+#define  FEC_RS_MEASUREMENT_PERIOD__A                                      0x1C30012
+#define  FEC_RS_MEASUREMENT_PRESCALE__A                                    0x1C30013
+#define  FEC_OC_MODE__A                                                    0x1C40011
+#define    FEC_OC_MODE_PARITY__M                                           0x1
+#define  FEC_OC_DTO_MODE__A                                                0x1C40014
+#define    FEC_OC_DTO_MODE_DYNAMIC__M                                      0x1
+#define    FEC_OC_DTO_MODE_OFFSET_ENABLE__M                                0x4
+#define  FEC_OC_DTO_PERIOD__A                                              0x1C40015
+#define  FEC_OC_DTO_BURST_LEN__A                                           0x1C40018
+#define  FEC_OC_FCT_MODE__A                                                0x1C4001A
+#define  FEC_OC_FCT_MODE__PRE                                              0x0
+#define    FEC_OC_FCT_MODE_RAT_ENA__M                                      0x1
+#define    FEC_OC_FCT_MODE_VIRT_ENA__M                                     0x2
+#define  FEC_OC_TMD_MODE__A                                                0x1C4001E
+#define  FEC_OC_TMD_COUNT__A                                               0x1C4001F
+#define  FEC_OC_TMD_HI_MARGIN__A                                           0x1C40020
+#define  FEC_OC_TMD_LO_MARGIN__A                                           0x1C40021
+#define  FEC_OC_TMD_INT_UPD_RATE__A                                        0x1C40023
+#define  FEC_OC_AVR_PARM_A__A                                              0x1C40026
+#define  FEC_OC_AVR_PARM_B__A                                              0x1C40027
+#define  FEC_OC_RCN_GAIN__A                                                0x1C4002E
+#define  FEC_OC_RCN_CTL_RATE_LO__A                                         0x1C40030
+#define  FEC_OC_RCN_CTL_STEP_LO__A                                         0x1C40032
+#define  FEC_OC_RCN_CTL_STEP_HI__A                                         0x1C40033
+#define  FEC_OC_SNC_MODE__A                                                0x1C40040
+#define    FEC_OC_SNC_MODE_SHUTDOWN__M                                     0x10
+#define  FEC_OC_SNC_LWM__A                                                 0x1C40041
+#define  FEC_OC_SNC_HWM__A                                                 0x1C40042
+#define  FEC_OC_SNC_UNLOCK__A                                              0x1C40043
+#define  FEC_OC_SNC_FAIL_PERIOD__A                                         0x1C40046
+#define  FEC_OC_IPR_MODE__A                                                0x1C40048
+#define    FEC_OC_IPR_MODE_SERIAL__M                                       0x1
+#define    FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M                             0x4
+#define    FEC_OC_IPR_MODE_MVAL_DIS_PAR__M                                 0x10
+#define  FEC_OC_IPR_INVERT__A                                              0x1C40049
+#define    FEC_OC_IPR_INVERT_MD0__M                                        0x1
+#define    FEC_OC_IPR_INVERT_MD1__M                                        0x2
+#define    FEC_OC_IPR_INVERT_MD2__M                                        0x4
+#define    FEC_OC_IPR_INVERT_MD3__M                                        0x8
+#define    FEC_OC_IPR_INVERT_MD4__M                                        0x10
+#define    FEC_OC_IPR_INVERT_MD5__M                                        0x20
+#define    FEC_OC_IPR_INVERT_MD6__M                                        0x40
+#define    FEC_OC_IPR_INVERT_MD7__M                                        0x80
+#define    FEC_OC_IPR_INVERT_MERR__M                                       0x100
+#define    FEC_OC_IPR_INVERT_MSTRT__M                                      0x200
+#define    FEC_OC_IPR_INVERT_MVAL__M                                       0x400
+#define    FEC_OC_IPR_INVERT_MCLK__M                                       0x800
+#define  FEC_OC_OCR_INVERT__A                                              0x1C40052
+#define  IQM_COMM_EXEC__A                                                  0x1800000
+#define      IQM_COMM_EXEC_B_STOP                                          0x0
+#define      IQM_COMM_EXEC_B_ACTIVE                                        0x1
+#define  IQM_FS_RATE_OFS_LO__A                                             0x1820010
+#define  IQM_FS_ADJ_SEL__A                                                 0x1820014
+#define      IQM_FS_ADJ_SEL_B_OFF                                          0x0
+#define      IQM_FS_ADJ_SEL_B_QAM                                          0x1
+#define      IQM_FS_ADJ_SEL_B_VSB                                          0x2
+#define  IQM_FD_RATESEL__A                                                 0x1830010
+#define  IQM_RC_RATE_OFS_LO__A                                             0x1840010
+#define  IQM_RC_RATE_OFS_LO__W                                             16
+#define  IQM_RC_RATE_OFS_LO__M                                             0xFFFF
+#define  IQM_RC_RATE_OFS_HI__M                                             0xFF
+#define  IQM_RC_ADJ_SEL__A                                                 0x1840014
+#define      IQM_RC_ADJ_SEL_B_OFF                                          0x0
+#define      IQM_RC_ADJ_SEL_B_QAM                                          0x1
+#define      IQM_RC_ADJ_SEL_B_VSB                                          0x2
+#define  IQM_RC_STRETCH__A                                                 0x1840016
+#define  IQM_CF_COMM_INT_MSK__A                                            0x1860006
+#define  IQM_CF_SYMMETRIC__A                                               0x1860010
+#define  IQM_CF_MIDTAP__A                                                  0x1860011
+#define    IQM_CF_MIDTAP_RE__B                                             0
+#define    IQM_CF_MIDTAP_IM__B                                             1
+#define  IQM_CF_OUT_ENA__A                                                 0x1860012
+#define    IQM_CF_OUT_ENA_QAM__B                                           1
+#define    IQM_CF_OUT_ENA_OFDM__M                                          0x4
+#define  IQM_CF_ADJ_SEL__A                                                 0x1860013
+#define  IQM_CF_SCALE__A                                                   0x1860014
+#define  IQM_CF_SCALE_SH__A                                                0x1860015
+#define  IQM_CF_SCALE_SH__PRE                                              0x0
+#define  IQM_CF_POW_MEAS_LEN__A                                            0x1860017
+#define  IQM_CF_DS_ENA__A                                                  0x1860019
+#define  IQM_CF_TAP_RE0__A                                                 0x1860020
+#define  IQM_CF_TAP_IM0__A                                                 0x1860040
+#define  IQM_CF_CLP_VAL__A                                                 0x1860060
+#define  IQM_CF_DATATH__A                                                  0x1860061
+#define  IQM_CF_PKDTH__A                                                   0x1860062
+#define  IQM_CF_WND_LEN__A                                                 0x1860063
+#define  IQM_CF_DET_LCT__A                                                 0x1860064
+#define  IQM_CF_BYPASSDET__A                                               0x1860067
+#define  IQM_AF_COMM_EXEC__A                                               0x1870000
+#define    IQM_AF_COMM_EXEC_ACTIVE                                         0x1
+#define  IQM_AF_CLKNEG__A                                                  0x1870012
+#define    IQM_AF_CLKNEG_CLKNEGDATA__M                                     0x2
+#define      IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS                     0x0
+#define      IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG                     0x2
+#define  IQM_AF_START_LOCK__A                                              0x187001B
+#define  IQM_AF_PHASE0__A                                                  0x187001C
+#define  IQM_AF_PHASE1__A                                                  0x187001D
+#define  IQM_AF_PHASE2__A                                                  0x187001E
+#define  IQM_AF_CLP_LEN__A                                                 0x1870023
+#define  IQM_AF_CLP_TH__A                                                  0x1870024
+#define  IQM_AF_SNS_LEN__A                                                 0x1870026
+#define  IQM_AF_AGC_IF__A                                                  0x1870028
+#define  IQM_AF_AGC_RF__A                                                  0x1870029
+#define  IQM_AF_PDREF__A                                                   0x187002B
+#define  IQM_AF_PDREF__M                                                   0x1F
+#define  IQM_AF_STDBY__A                                                   0x187002C
+#define      IQM_AF_STDBY_STDBY_ADC_STANDBY                                0x2
+#define      IQM_AF_STDBY_STDBY_AMP_STANDBY                                0x4
+#define      IQM_AF_STDBY_STDBY_PD_STANDBY                                 0x8
+#define      IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY                            0x10
+#define      IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY                            0x20
+#define  IQM_AF_AMUX__A                                                    0x187002D
+#define    IQM_AF_AMUX_SIGNAL2ADC                                          0x1
+#define  IQM_AF_UPD_SEL__A                                                 0x187002F
+#define  IQM_AF_INC_LCT__A                                                 0x1870034
+#define  IQM_AF_INC_BYPASS__A                                              0x1870036
+#define  OFDM_CP_COMM_EXEC__A                                              0x2800000
+#define    OFDM_CP_COMM_EXEC_STOP                                          0x0
+#define  OFDM_EC_SB_PRIOR__A                                               0x3410013
+#define    OFDM_EC_SB_PRIOR_HI                                             0x0
+#define    OFDM_EC_SB_PRIOR_LO                                             0x1
+#define  OFDM_EQ_TOP_TD_TPS_CONST__A                                       0x3010054
+#define  OFDM_EQ_TOP_TD_TPS_CONST__M                                       0x3
+#define    OFDM_EQ_TOP_TD_TPS_CONST_64QAM                                  0x2
+#define  OFDM_EQ_TOP_TD_TPS_CODE_HP__A                                     0x3010056
+#define  OFDM_EQ_TOP_TD_TPS_CODE_HP__M                                     0x7
+#define    OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8                                  0x4
+#define  OFDM_EQ_TOP_TD_SQR_ERR_I__A                                       0x301005E
+#define  OFDM_EQ_TOP_TD_SQR_ERR_Q__A                                       0x301005F
+#define  OFDM_EQ_TOP_TD_SQR_ERR_EXP__A                                     0x3010060
+#define  OFDM_EQ_TOP_TD_REQ_SMB_CNT__A                                     0x3010061
+#define  OFDM_EQ_TOP_TD_TPS_PWR_OFS__A                                     0x3010062
+#define  OFDM_LC_COMM_EXEC__A                                              0x3800000
+#define    OFDM_LC_COMM_EXEC_STOP                                          0x0
+#define  OFDM_SC_COMM_EXEC__A                                              0x3C00000
+#define    OFDM_SC_COMM_EXEC_STOP                                          0x0
+#define  OFDM_SC_COMM_STATE__A                                             0x3C00001
+#define  OFDM_SC_RA_RAM_PARAM0__A                                          0x3C20040
+#define  OFDM_SC_RA_RAM_PARAM1__A                                          0x3C20041
+#define  OFDM_SC_RA_RAM_CMD_ADDR__A                                        0x3C20042
+#define  OFDM_SC_RA_RAM_CMD__A                                             0x3C20043
+#define    OFDM_SC_RA_RAM_CMD_NULL                                         0x0
+#define    OFDM_SC_RA_RAM_CMD_PROC_START                                   0x1
+#define    OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM                               0x3
+#define    OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM                                0x4
+#define    OFDM_SC_RA_RAM_CMD_GET_OP_PARAM                                 0x5
+#define    OFDM_SC_RA_RAM_CMD_USER_IO                                      0x6
+#define    OFDM_SC_RA_RAM_CMD_SET_TIMER                                    0x7
+#define    OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING                              0x8
+#define    OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M                            0x1
+#define    OFDM_SC_RA_RAM_LOCKTRACK_MIN                                    0x1
+#define  OFDM_SC_RA_RAM_OP_PARAM__A                                        0x3C20048
+#define    OFDM_SC_RA_RAM_OP_PARAM_MODE__M                                 0x3
+#define      OFDM_SC_RA_RAM_OP_PARAM_MODE_2K                               0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_MODE_8K                               0x1
+#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_32                              0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_16                              0x4
+#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_8                               0x8
+#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_4                               0xC
+#define      OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK                            0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16                           0x10
+#define      OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64                           0x20
+#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_NO                               0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_A1                               0x40
+#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_A2                               0x80
+#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_A4                               0xC0
+#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2                              0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3                              0x200
+#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4                              0x400
+#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6                              0x600
+#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8                              0x800
+#define      OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI                               0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO                               0x1000
+#define    OFDM_SC_RA_RAM_OP_AUTO_MODE__M                                  0x1
+#define    OFDM_SC_RA_RAM_OP_AUTO_GUARD__M                                 0x2
+#define    OFDM_SC_RA_RAM_OP_AUTO_CONST__M                                 0x4
+#define    OFDM_SC_RA_RAM_OP_AUTO_HIER__M                                  0x8
+#define    OFDM_SC_RA_RAM_OP_AUTO_RATE__M                                  0x10
+#define  OFDM_SC_RA_RAM_LOCK__A                                            0x3C2004B
+#define    OFDM_SC_RA_RAM_LOCK_DEMOD__M                                    0x1
+#define    OFDM_SC_RA_RAM_LOCK_FEC__M                                      0x2
+#define    OFDM_SC_RA_RAM_LOCK_MPEG__M                                     0x4
+#define    OFDM_SC_RA_RAM_LOCK_NODVBT__M                                   0x8
+#define  OFDM_SC_RA_RAM_BE_OPT_DELAY__A                                    0x3C2004D
+#define  OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A                               0x3C2004E
+#define  OFDM_SC_RA_RAM_ECHO_THRES__A                                      0x3C2004F
+#define    OFDM_SC_RA_RAM_ECHO_THRES_8K__B                                 0
+#define    OFDM_SC_RA_RAM_ECHO_THRES_8K__M                                 0xFF
+#define    OFDM_SC_RA_RAM_ECHO_THRES_2K__B                                 8
+#define    OFDM_SC_RA_RAM_ECHO_THRES_2K__M                                 0xFF00
+#define  OFDM_SC_RA_RAM_CONFIG__A                                          0x3C20050
+#define    OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M                          0x800
+#define  OFDM_SC_RA_RAM_FR_THRES_8K__A                                     0x3C2007D
+#define  OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A                             0x3C200E0
+#define  OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A                            0x3C200E1
+#define  OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A                             0x3C200E3
+#define  OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A                            0x3C200E4
+#define  OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A                                0x3C200F8
+#define  QAM_COMM_EXEC__A                                                  0x1400000
+#define    QAM_COMM_EXEC_STOP                                              0x0
+#define    QAM_COMM_EXEC_ACTIVE                                            0x1
+#define    QAM_TOP_ANNEX_A                                                 0x0
+#define    QAM_TOP_ANNEX_C                                                 0x2
+#define  QAM_SL_ERR_POWER__A                                               0x1430017
+#define  QAM_DQ_QUAL_FUN0__A                                               0x1440018
+#define  QAM_DQ_QUAL_FUN1__A                                               0x1440019
+#define  QAM_DQ_QUAL_FUN2__A                                               0x144001A
+#define  QAM_DQ_QUAL_FUN3__A                                               0x144001B
+#define  QAM_DQ_QUAL_FUN4__A                                               0x144001C
+#define  QAM_DQ_QUAL_FUN5__A                                               0x144001D
+#define  QAM_LC_MODE__A                                                    0x1450010
+#define  QAM_LC_QUAL_TAB0__A                                               0x1450018
+#define  QAM_LC_QUAL_TAB1__A                                               0x1450019
+#define  QAM_LC_QUAL_TAB2__A                                               0x145001A
+#define  QAM_LC_QUAL_TAB3__A                                               0x145001B
+#define  QAM_LC_QUAL_TAB4__A                                               0x145001C
+#define  QAM_LC_QUAL_TAB5__A                                               0x145001D
+#define  QAM_LC_QUAL_TAB6__A                                               0x145001E
+#define  QAM_LC_QUAL_TAB8__A                                               0x145001F
+#define  QAM_LC_QUAL_TAB9__A                                               0x1450020
+#define  QAM_LC_QUAL_TAB10__A                                              0x1450021
+#define  QAM_LC_QUAL_TAB12__A                                              0x1450022
+#define  QAM_LC_QUAL_TAB15__A                                              0x1450023
+#define  QAM_LC_QUAL_TAB16__A                                              0x1450024
+#define  QAM_LC_QUAL_TAB20__A                                              0x1450025
+#define  QAM_LC_QUAL_TAB25__A                                              0x1450026
+#define  QAM_LC_LPF_FACTORP__A                                             0x1450028
+#define  QAM_LC_LPF_FACTORI__A                                             0x1450029
+#define  QAM_LC_RATE_LIMIT__A                                              0x145002A
+#define  QAM_LC_SYMBOL_FREQ__A                                             0x145002B
+#define  QAM_SY_TIMEOUT__A                                                 0x1470011
+#define  QAM_SY_TIMEOUT__PRE                                               0x3A98
+#define  QAM_SY_SYNC_LWM__A                                                0x1470012
+#define  QAM_SY_SYNC_AWM__A                                                0x1470013
+#define  QAM_SY_SYNC_HWM__A                                                0x1470014
+#define  QAM_SY_SP_INV__A                                                  0x1470017
+#define    QAM_SY_SP_INV_SPECTRUM_INV_DIS                                  0x0
+#define  SCU_COMM_EXEC__A                                                  0x800000
+#define    SCU_COMM_EXEC_STOP                                              0x0
+#define    SCU_COMM_EXEC_ACTIVE                                            0x1
+#define    SCU_COMM_EXEC_HOLD                                              0x2
+#define  SCU_RAM_DRIVER_DEBUG__A                                           0x831EBF
+#define  SCU_RAM_QAM_FSM_STEP_PERIOD__A                                    0x831EC4
+#define  SCU_RAM_GPIO__A                                                   0x831EC7
+#define      SCU_RAM_GPIO_HW_LOCK_IND_DISABLE                              0x0
+#define  SCU_RAM_AGC_CLP_CTRL_MODE__A                                      0x831EC8
+#define  SCU_RAM_FEC_ACCUM_PKT_FAILURES__A                                 0x831ECB
+#define  SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A                               0x831F05
+#define  SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A                                0x831F15
+#define  SCU_RAM_AGC_KI_CYCLEN__A                                          0x831F17
+#define  SCU_RAM_AGC_SNS_CYCLEN__A                                         0x831F18
+#define  SCU_RAM_AGC_RF_SNS_DEV_MAX__A                                     0x831F19
+#define  SCU_RAM_AGC_RF_SNS_DEV_MIN__A                                     0x831F1A
+#define  SCU_RAM_AGC_RF_MAX__A                                             0x831F1B
+#define  SCU_RAM_AGC_CONFIG__A                                             0x831F24
+#define    SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M                            0x1
+#define    SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M                            0x2
+#define    SCU_RAM_AGC_CONFIG_INV_IF_POL__M                                0x100
+#define    SCU_RAM_AGC_CONFIG_INV_RF_POL__M                                0x200
+#define  SCU_RAM_AGC_KI__A                                                 0x831F25
+#define    SCU_RAM_AGC_KI_RF__B                                            4
+#define    SCU_RAM_AGC_KI_RF__M                                            0xF0
+#define    SCU_RAM_AGC_KI_IF__B                                            8
+#define    SCU_RAM_AGC_KI_IF__M                                            0xF00
+#define  SCU_RAM_AGC_KI_RED__A                                             0x831F26
+#define    SCU_RAM_AGC_KI_RED_RAGC_RED__B                                  2
+#define    SCU_RAM_AGC_KI_RED_RAGC_RED__M                                  0xC
+#define    SCU_RAM_AGC_KI_RED_IAGC_RED__B                                  4
+#define    SCU_RAM_AGC_KI_RED_IAGC_RED__M                                  0x30
+#define  SCU_RAM_AGC_KI_INNERGAIN_MIN__A                                   0x831F27
+#define  SCU_RAM_AGC_KI_MINGAIN__A                                         0x831F28
+#define  SCU_RAM_AGC_KI_MAXGAIN__A                                         0x831F29
+#define  SCU_RAM_AGC_KI_MAXMINGAIN_TH__A                                   0x831F2A
+#define  SCU_RAM_AGC_KI_MIN__A                                             0x831F2B
+#define  SCU_RAM_AGC_KI_MAX__A                                             0x831F2C
+#define  SCU_RAM_AGC_CLP_SUM__A                                            0x831F2D
+#define  SCU_RAM_AGC_CLP_SUM_MIN__A                                        0x831F2E
+#define  SCU_RAM_AGC_CLP_SUM_MAX__A                                        0x831F2F
+#define  SCU_RAM_AGC_CLP_CYCLEN__A                                         0x831F30
+#define  SCU_RAM_AGC_CLP_CYCCNT__A                                         0x831F31
+#define  SCU_RAM_AGC_CLP_DIR_TO__A                                         0x831F32
+#define  SCU_RAM_AGC_CLP_DIR_WD__A                                         0x831F33
+#define  SCU_RAM_AGC_CLP_DIR_STP__A                                        0x831F34
+#define  SCU_RAM_AGC_SNS_SUM__A                                            0x831F35
+#define  SCU_RAM_AGC_SNS_SUM_MIN__A                                        0x831F36
+#define  SCU_RAM_AGC_SNS_SUM_MAX__A                                        0x831F37
+#define  SCU_RAM_AGC_SNS_CYCCNT__A                                         0x831F38
+#define  SCU_RAM_AGC_SNS_DIR_TO__A                                         0x831F39
+#define  SCU_RAM_AGC_SNS_DIR_WD__A                                         0x831F3A
+#define  SCU_RAM_AGC_SNS_DIR_STP__A                                        0x831F3B
+#define  SCU_RAM_AGC_INGAIN_TGT__A                                         0x831F3D
+#define  SCU_RAM_AGC_INGAIN_TGT_MIN__A                                     0x831F3E
+#define  SCU_RAM_AGC_INGAIN_TGT_MAX__A                                     0x831F3F
+#define  SCU_RAM_AGC_IF_IACCU_HI__A                                        0x831F40
+#define  SCU_RAM_AGC_IF_IACCU_LO__A                                        0x831F41
+#define  SCU_RAM_AGC_IF_IACCU_HI_TGT__A                                    0x831F42
+#define  SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A                                0x831F43
+#define  SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A                                0x831F44
+#define  SCU_RAM_AGC_RF_IACCU_HI__A                                        0x831F45
+#define  SCU_RAM_AGC_RF_IACCU_LO__A                                        0x831F46
+#define  SCU_RAM_AGC_RF_IACCU_HI_CO__A                                     0x831F47
+#define  SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A                                 0x831F84
+#define  SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A                                0x831F85
+#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A                                  0x831F86
+#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A                                  0x831F87
+#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A                                  0x831F88
+#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A                                  0x831F89
+#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A                                  0x831F8A
+#define  SCU_RAM_QAM_FSM_RTH__A                                            0x831F8E
+#define  SCU_RAM_QAM_FSM_FTH__A                                            0x831F8F
+#define  SCU_RAM_QAM_FSM_PTH__A                                            0x831F90
+#define  SCU_RAM_QAM_FSM_MTH__A                                            0x831F91
+#define  SCU_RAM_QAM_FSM_CTH__A                                            0x831F92
+#define  SCU_RAM_QAM_FSM_QTH__A                                            0x831F93
+#define  SCU_RAM_QAM_FSM_RATE_LIM__A                                       0x831F94
+#define  SCU_RAM_QAM_FSM_FREQ_LIM__A                                       0x831F95
+#define  SCU_RAM_QAM_FSM_COUNT_LIM__A                                      0x831F96
+#define  SCU_RAM_QAM_LC_CA_COARSE__A                                       0x831F97
+#define  SCU_RAM_QAM_LC_CA_FINE__A                                         0x831F99
+#define  SCU_RAM_QAM_LC_CP_COARSE__A                                       0x831F9A
+#define  SCU_RAM_QAM_LC_CP_MEDIUM__A                                       0x831F9B
+#define  SCU_RAM_QAM_LC_CP_FINE__A                                         0x831F9C
+#define  SCU_RAM_QAM_LC_CI_COARSE__A                                       0x831F9D
+#define  SCU_RAM_QAM_LC_CI_MEDIUM__A                                       0x831F9E
+#define  SCU_RAM_QAM_LC_CI_FINE__A                                         0x831F9F
+#define  SCU_RAM_QAM_LC_EP_COARSE__A                                       0x831FA0
+#define  SCU_RAM_QAM_LC_EP_MEDIUM__A                                       0x831FA1
+#define  SCU_RAM_QAM_LC_EP_FINE__A                                         0x831FA2
+#define  SCU_RAM_QAM_LC_EI_COARSE__A                                       0x831FA3
+#define  SCU_RAM_QAM_LC_EI_MEDIUM__A                                       0x831FA4
+#define  SCU_RAM_QAM_LC_EI_FINE__A                                         0x831FA5
+#define  SCU_RAM_QAM_LC_CF_COARSE__A                                       0x831FA6
+#define  SCU_RAM_QAM_LC_CF_MEDIUM__A                                       0x831FA7
+#define  SCU_RAM_QAM_LC_CF_FINE__A                                         0x831FA8
+#define  SCU_RAM_QAM_LC_CF1_COARSE__A                                      0x831FA9
+#define  SCU_RAM_QAM_LC_CF1_MEDIUM__A                                      0x831FAA
+#define  SCU_RAM_QAM_LC_CF1_FINE__A                                        0x831FAB
+#define  SCU_RAM_QAM_SL_SIG_POWER__A                                       0x831FAC
+#define  SCU_RAM_QAM_EQ_CMA_RAD0__A                                        0x831FAD
+#define  SCU_RAM_QAM_EQ_CMA_RAD1__A                                        0x831FAE
+#define  SCU_RAM_QAM_EQ_CMA_RAD2__A                                        0x831FAF
+#define  SCU_RAM_QAM_EQ_CMA_RAD3__A                                        0x831FB0
+#define  SCU_RAM_QAM_EQ_CMA_RAD4__A                                        0x831FB1
+#define  SCU_RAM_QAM_EQ_CMA_RAD5__A                                        0x831FB2
+#define      SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED                        0x4000
+#define      SCU_RAM_QAM_LOCKED_LOCKED_LOCKED                              0x8000
+#define      SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK                          0xC000
+#define  SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A                                0x831FEA
+#define  SCU_RAM_DRIVER_VER_HI__A                                          0x831FEB
+#define  SCU_RAM_DRIVER_VER_LO__A                                          0x831FEC
+#define  SCU_RAM_PARAM_15__A                                               0x831FED
+#define  SCU_RAM_PARAM_0__A                                                0x831FFC
+#define  SCU_RAM_COMMAND__A                                                0x831FFD
+#define    SCU_RAM_COMMAND_CMD_DEMOD_RESET                                 0x1
+#define    SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV                               0x2
+#define    SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM                             0x3
+#define    SCU_RAM_COMMAND_CMD_DEMOD_START                                 0x4
+#define    SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK                              0x5
+#define    SCU_RAM_COMMAND_CMD_DEMOD_STOP                                  0x9
+#define      SCU_RAM_COMMAND_STANDARD_QAM                                  0x200
+#define      SCU_RAM_COMMAND_STANDARD_OFDM                                 0x400
+#define  SIO_TOP_COMM_KEY__A                                               0x41000F
+#define    SIO_TOP_COMM_KEY_KEY                                            0xFABA
+#define  SIO_TOP_JTAGID_LO__A                                              0x410012
+#define  SIO_HI_RA_RAM_RES__A                                              0x420031
+#define  SIO_HI_RA_RAM_CMD__A                                              0x420032
+#define    SIO_HI_RA_RAM_CMD_RESET                                         0x2
+#define    SIO_HI_RA_RAM_CMD_CONFIG                                        0x3
+#define    SIO_HI_RA_RAM_CMD_BRDCTRL                                       0x7
+#define  SIO_HI_RA_RAM_PAR_1__A                                            0x420033
+#define      SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY                              0x3945
+#define  SIO_HI_RA_RAM_PAR_2__A                                            0x420034
+#define    SIO_HI_RA_RAM_PAR_2_CFG_DIV__M                                  0x7F
+#define      SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN                              0x0
+#define      SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED                            0x4
+#define  SIO_HI_RA_RAM_PAR_3__A                                            0x420035
+#define    SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M                              0x7F
+#define    SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B                              7
+#define      SIO_HI_RA_RAM_PAR_3_ACP_RW_READ                               0x0
+#define      SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE                              0x8
+#define  SIO_HI_RA_RAM_PAR_4__A                                            0x420036
+#define  SIO_HI_RA_RAM_PAR_5__A                                            0x420037
+#define      SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE                            0x1
+#define    SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M                                0x8
+#define      SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ                             0x8
+#define  SIO_HI_RA_RAM_PAR_6__A                                            0x420038
+#define  SIO_CC_PLL_LOCK__A                                                0x450012
+#define  SIO_CC_PWD_MODE__A                                                0x450015
+#define      SIO_CC_PWD_MODE_LEVEL_NONE                                    0x0
+#define      SIO_CC_PWD_MODE_LEVEL_OFDM                                    0x1
+#define      SIO_CC_PWD_MODE_LEVEL_CLOCK                                   0x2
+#define      SIO_CC_PWD_MODE_LEVEL_PLL                                     0x3
+#define      SIO_CC_PWD_MODE_LEVEL_OSC                                     0x4
+#define  SIO_CC_SOFT_RST__A                                                0x450016
+#define    SIO_CC_SOFT_RST_OFDM__M                                         0x1
+#define    SIO_CC_SOFT_RST_SYS__M                                          0x2
+#define    SIO_CC_SOFT_RST_OSC__M                                          0x4
+#define  SIO_CC_UPDATE__A                                                  0x450017
+#define    SIO_CC_UPDATE_KEY                                               0xFABA
+#define  SIO_OFDM_SH_OFDM_RING_ENABLE__A                                   0x470010
+#define    SIO_OFDM_SH_OFDM_RING_ENABLE_OFF                                0x0
+#define    SIO_OFDM_SH_OFDM_RING_ENABLE_ON                                 0x1
+#define  SIO_OFDM_SH_OFDM_RING_STATUS__A                                   0x470012
+#define    SIO_OFDM_SH_OFDM_RING_STATUS_DOWN                               0x0
+#define    SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED                            0x1
+#define  SIO_BL_COMM_EXEC__A                                               0x480000
+#define    SIO_BL_COMM_EXEC_ACTIVE                                         0x1
+#define  SIO_BL_STATUS__A                                                  0x480010
+#define  SIO_BL_MODE__A                                                    0x480011
+#define    SIO_BL_MODE_DIRECT                                              0x0
+#define    SIO_BL_MODE_CHAIN                                               0x1
+#define  SIO_BL_ENABLE__A                                                  0x480012
+#define    SIO_BL_ENABLE_ON                                                0x1
+#define  SIO_BL_TGT_HDR__A                                                 0x480014
+#define  SIO_BL_TGT_ADDR__A                                                0x480015
+#define  SIO_BL_SRC_ADDR__A                                                0x480016
+#define  SIO_BL_SRC_LEN__A                                                 0x480017
+#define  SIO_BL_CHAIN_ADDR__A                                              0x480018
+#define  SIO_BL_CHAIN_LEN__A                                               0x480019
+#define  SIO_PDR_MON_CFG__A                                                0x7F0010
+#define  SIO_PDR_UIO_IN_HI__A                                              0x7F0015
+#define  SIO_PDR_UIO_OUT_LO__A                                             0x7F0016
+#define  SIO_PDR_OHW_CFG__A                                                0x7F001F
+#define    SIO_PDR_OHW_CFG_FREF_SEL__M                                     0x3
+#define  SIO_PDR_MSTRT_CFG__A                                              0x7F0025
+#define  SIO_PDR_MERR_CFG__A                                               0x7F0026
+#define  SIO_PDR_MCLK_CFG__A                                               0x7F0028
+#define    SIO_PDR_MCLK_CFG_DRIVE__B                                       3
+#define  SIO_PDR_MVAL_CFG__A                                               0x7F0029
+#define  SIO_PDR_MD0_CFG__A                                                0x7F002A
+#define    SIO_PDR_MD0_CFG_DRIVE__B                                        3
+#define  SIO_PDR_MD1_CFG__A                                                0x7F002B
+#define  SIO_PDR_MD2_CFG__A                                                0x7F002C
+#define  SIO_PDR_MD3_CFG__A                                                0x7F002D
+#define  SIO_PDR_MD4_CFG__A                                                0x7F002F
+#define  SIO_PDR_MD5_CFG__A                                                0x7F0030
+#define  SIO_PDR_MD6_CFG__A                                                0x7F0031
+#define  SIO_PDR_MD7_CFG__A                                                0x7F0032
+#define  SIO_PDR_SMA_TX_CFG__A                                             0x7F0038
diff --git a/drivers/media/dvb/frontends/itd1000.c b/drivers/media/dvb/frontends/itd1000.c
index f7a40a1..aa9ccb8 100644
--- a/drivers/media/dvb/frontends/itd1000.c
+++ b/drivers/media/dvb/frontends/itd1000.c
@@ -35,21 +35,18 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
 
-#define deb(args...)  do { \
+#define itd_dbg(args...)  do { \
 	if (debug) { \
 		printk(KERN_DEBUG   "ITD1000: " args);\
-		printk("\n"); \
 	} \
 } while (0)
 
-#define warn(args...) do { \
+#define itd_warn(args...) do { \
 	printk(KERN_WARNING "ITD1000: " args); \
-	printk("\n"); \
 } while (0)
 
-#define info(args...) do { \
+#define itd_info(args...) do { \
 	printk(KERN_INFO    "ITD1000: " args); \
-	printk("\n"); \
 } while (0)
 
 /* don't write more than one byte with flexcop behind */
@@ -62,7 +59,7 @@ static int itd1000_write_regs(struct itd1000_state *state, u8 reg, u8 v[], u8 le
 	buf[0] = reg;
 	memcpy(&buf[1], v, len);
 
-	/* deb("wr %02x: %02x", reg, v[0]); */
+	/* itd_dbg("wr %02x: %02x\n", reg, v[0]); */
 
 	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
 		printk(KERN_WARNING "itd1000 I2C write failed\n");
@@ -83,7 +80,7 @@ static int itd1000_read_reg(struct itd1000_state *state, u8 reg)
 	itd1000_write_regs(state, (reg - 1) & 0xff, &state->shadow[(reg - 1) & 0xff], 1);
 
 	if (i2c_transfer(state->i2c, msg, 2) != 2) {
-		warn("itd1000 I2C read failed");
+		itd_warn("itd1000 I2C read failed\n");
 		return -EREMOTEIO;
 	}
 	return val;
@@ -127,14 +124,14 @@ static void itd1000_set_lpf_bw(struct itd1000_state *state, u32 symbol_rate)
 	u8 bbgvmin = itd1000_read_reg(state, BBGVMIN) & 0xf0;
 	u8 bw      = itd1000_read_reg(state, BW)      & 0xf0;
 
-	deb("symbol_rate = %d", symbol_rate);
+	itd_dbg("symbol_rate = %d\n", symbol_rate);
 
 	/* not sure what is that ? - starting to download the table */
 	itd1000_write_reg(state, CON1, con1 | (1 << 1));
 
 	for (i = 0; i < ARRAY_SIZE(itd1000_lpf_pga); i++)
 		if (symbol_rate < itd1000_lpf_pga[i].symbol_rate) {
-			deb("symrate: index: %d pgaext: %x, bbgvmin: %x", i, itd1000_lpf_pga[i].pgaext, itd1000_lpf_pga[i].bbgvmin);
+			itd_dbg("symrate: index: %d pgaext: %x, bbgvmin: %x\n", i, itd1000_lpf_pga[i].pgaext, itd1000_lpf_pga[i].bbgvmin);
 			itd1000_write_reg(state, PLLFH,   pllfh | (itd1000_lpf_pga[i].pgaext << 4));
 			itd1000_write_reg(state, BBGVMIN, bbgvmin | (itd1000_lpf_pga[i].bbgvmin));
 			itd1000_write_reg(state, BW,      bw | (i & 0x0f));
@@ -182,7 +179,7 @@ static void itd1000_set_vco(struct itd1000_state *state, u32 freq_khz)
 
 			adcout = itd1000_read_reg(state, PLLLOCK) & 0x0f;
 
-			deb("VCO: %dkHz: %d -> ADCOUT: %d %02x", freq_khz, itd1000_vcorg[i].vcorg, adcout, vco_chp1_i2c);
+			itd_dbg("VCO: %dkHz: %d -> ADCOUT: %d %02x\n", freq_khz, itd1000_vcorg[i].vcorg, adcout, vco_chp1_i2c);
 
 			if (adcout > 13) {
 				if (!(itd1000_vcorg[i].vcorg == 7 || itd1000_vcorg[i].vcorg == 15))
@@ -232,7 +229,7 @@ static void itd1000_set_lo(struct itd1000_state *state, u32 freq_khz)
 	pllf = (u32) tmp;
 
 	state->frequency = ((plln * 1000) + (pllf * 1000)/1048576) * 2*FREF;
-	deb("frequency: %dkHz (wanted) %dkHz (set), PLLF = %d, PLLN = %d", freq_khz, state->frequency, pllf, plln);
+	itd_dbg("frequency: %dkHz (wanted) %dkHz (set), PLLF = %d, PLLN = %d\n", freq_khz, state->frequency, pllf, plln);
 
 	itd1000_write_reg(state, PLLNH, 0x80); /* PLLNH */;
 	itd1000_write_reg(state, PLLNL, plln & 0xff);
@@ -242,7 +239,7 @@ static void itd1000_set_lo(struct itd1000_state *state, u32 freq_khz)
 
 	for (i = 0; i < ARRAY_SIZE(itd1000_fre_values); i++) {
 		if (freq_khz <= itd1000_fre_values[i].freq) {
-			deb("fre_values: %d", i);
+			itd_dbg("fre_values: %d\n", i);
 			itd1000_write_reg(state, RFTR, itd1000_fre_values[i].values[0]);
 			for (j = 0; j < 9; j++)
 				itd1000_write_reg(state, RFST1+j, itd1000_fre_values[i].values[j+1]);
@@ -382,7 +379,7 @@ struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter
 		kfree(state);
 		return NULL;
 	}
-	info("successfully identified (ID: %d)", i);
+	itd_info("successfully identified (ID: %d)\n", i);
 
 	memset(state->shadow, 0xff, sizeof(state->shadow));
 	for (i = 0x65; i < 0x9c; i++)
diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c
index a763ec75..6599b8f 100644
--- a/drivers/media/dvb/frontends/nxt6000.c
+++ b/drivers/media/dvb/frontends/nxt6000.c
@@ -50,7 +50,7 @@ static int nxt6000_writereg(struct nxt6000_state* state, u8 reg, u8 data)
 	if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1)
 		dprintk("nxt6000: nxt6000_write error (reg: 0x%02X, data: 0x%02X, ret: %d)\n", reg, data, ret);
 
-	return (ret != 1) ? -EFAULT : 0;
+	return (ret != 1) ? -EIO : 0;
 }
 
 static u8 nxt6000_readreg(struct nxt6000_state* state, u8 reg)
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index 17f8cdf..3879d2e 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -634,7 +634,7 @@ static int s5h1420_set_frontend(struct dvb_frontend* fe,
 	struct s5h1420_state* state = fe->demodulator_priv;
 	int frequency_delta;
 	struct dvb_frontend_tune_settings fesettings;
-	uint8_t clock_settting;
+	uint8_t clock_setting;
 
 	dprintk("enter %s\n", __func__);
 
@@ -684,19 +684,19 @@ static int s5h1420_set_frontend(struct dvb_frontend* fe,
 	switch (state->fclk) {
 	default:
 	case 88000000:
-		clock_settting = 80;
+		clock_setting = 80;
 		break;
 	case 86000000:
-		clock_settting = 78;
+		clock_setting = 78;
 		break;
 	case 80000000:
-		clock_settting = 72;
+		clock_setting = 72;
 		break;
 	case 59000000:
-		clock_settting = 51;
+		clock_setting = 51;
 		break;
 	case 44000000:
-		clock_settting = 36;
+		clock_setting = 36;
 		break;
 	}
 	dprintk("pll01: %d, ToneFreq: %d\n", state->fclk/1000000 - 8, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32));
diff --git a/drivers/media/dvb/frontends/tda18271c2dd.c b/drivers/media/dvb/frontends/tda18271c2dd.c
new file mode 100644
index 0000000..0384e8d
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda18271c2dd.c
@@ -0,0 +1,1251 @@
+/*
+ * tda18271c2dd: Driver for the TDA18271C2 tuner
+ *
+ * Copyright (C) 2010 Digital Devices GmbH
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/version.h>
+#include <asm/div64.h>
+
+#include "dvb_frontend.h"
+
+struct SStandardParam {
+	s32   m_IFFrequency;
+	u32   m_BandWidth;
+	u8    m_EP3_4_0;
+	u8    m_EB22;
+};
+
+struct SMap {
+	u32   m_Frequency;
+	u8    m_Param;
+};
+
+struct SMapI {
+	u32   m_Frequency;
+	s32    m_Param;
+};
+
+struct SMap2 {
+	u32   m_Frequency;
+	u8    m_Param1;
+	u8    m_Param2;
+};
+
+struct SRFBandMap {
+	u32   m_RF_max;
+	u32   m_RF1_Default;
+	u32   m_RF2_Default;
+	u32   m_RF3_Default;
+};
+
+enum ERegister {
+	ID = 0,
+	TM,
+	PL,
+	EP1, EP2, EP3, EP4, EP5,
+	CPD, CD1, CD2, CD3,
+	MPD, MD1, MD2, MD3,
+	EB1, EB2, EB3, EB4, EB5, EB6, EB7, EB8, EB9, EB10,
+	EB11, EB12, EB13, EB14, EB15, EB16, EB17, EB18, EB19, EB20,
+	EB21, EB22, EB23,
+	NUM_REGS
+};
+
+struct tda_state {
+	struct i2c_adapter *i2c;
+	u8 adr;
+
+	u32   m_Frequency;
+	u32   IF;
+
+	u8    m_IFLevelAnalog;
+	u8    m_IFLevelDigital;
+	u8    m_IFLevelDVBC;
+	u8    m_IFLevelDVBT;
+
+	u8    m_EP4;
+	u8    m_EP3_Standby;
+
+	bool  m_bMaster;
+
+	s32   m_SettlingTime;
+
+	u8    m_Regs[NUM_REGS];
+
+	/* Tracking filter settings for band 0..6 */
+	u32   m_RF1[7];
+	s32   m_RF_A1[7];
+	s32   m_RF_B1[7];
+	u32   m_RF2[7];
+	s32   m_RF_A2[7];
+	s32   m_RF_B2[7];
+	u32   m_RF3[7];
+
+	u8    m_TMValue_RFCal;    /* Calibration temperatur */
+
+	bool  m_bFMInput;         /* true to use Pin 8 for FM Radio */
+
+};
+
+static int PowerScan(struct tda_state *state,
+		     u8 RFBand, u32 RF_in,
+		     u32 *pRF_Out, bool *pbcal);
+
+static int i2c_readn(struct i2c_adapter *adapter, u8 adr, u8 *data, int len)
+{
+	struct i2c_msg msgs[1] = {{.addr = adr,  .flags = I2C_M_RD,
+				   .buf  = data, .len   = len} };
+	return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
+}
+
+static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 *data, int len)
+{
+	struct i2c_msg msg = {.addr = adr, .flags = 0,
+			      .buf = data, .len = len};
+
+	if (i2c_transfer(adap, &msg, 1) != 1) {
+		printk(KERN_ERR "tda18271c2dd: i2c write error at addr %i\n", adr);
+		return -1;
+	}
+	return 0;
+}
+
+static int WriteRegs(struct tda_state *state,
+		     u8 SubAddr, u8 *Regs, u16 nRegs)
+{
+	u8 data[nRegs+1];
+
+	data[0] = SubAddr;
+	memcpy(data + 1, Regs, nRegs);
+	return i2c_write(state->i2c, state->adr, data, nRegs+1);
+}
+
+static int WriteReg(struct tda_state *state, u8 SubAddr, u8 Reg)
+{
+	u8 msg[2] = {SubAddr, Reg};
+
+	return i2c_write(state->i2c, state->adr, msg, 2);
+}
+
+static int Read(struct tda_state *state, u8 * Regs)
+{
+	return i2c_readn(state->i2c, state->adr, Regs, 16);
+}
+
+static int ReadExtented(struct tda_state *state, u8 * Regs)
+{
+	return i2c_readn(state->i2c, state->adr, Regs, NUM_REGS);
+}
+
+static int UpdateRegs(struct tda_state *state, u8 RegFrom, u8 RegTo)
+{
+	return WriteRegs(state, RegFrom,
+			 &state->m_Regs[RegFrom], RegTo-RegFrom+1);
+}
+static int UpdateReg(struct tda_state *state, u8 Reg)
+{
+	return WriteReg(state, Reg, state->m_Regs[Reg]);
+}
+
+#include "tda18271c2dd_maps.h"
+
+static void reset(struct tda_state *state)
+{
+	u32   ulIFLevelAnalog = 0;
+	u32   ulIFLevelDigital = 2;
+	u32   ulIFLevelDVBC = 7;
+	u32   ulIFLevelDVBT = 6;
+	u32   ulXTOut = 0;
+	u32   ulStandbyMode = 0x06;    /* Send in stdb, but leave osc on */
+	u32   ulSlave = 0;
+	u32   ulFMInput = 0;
+	u32   ulSettlingTime = 100;
+
+	state->m_Frequency         = 0;
+	state->m_SettlingTime = 100;
+	state->m_IFLevelAnalog = (ulIFLevelAnalog & 0x07) << 2;
+	state->m_IFLevelDigital = (ulIFLevelDigital & 0x07) << 2;
+	state->m_IFLevelDVBC = (ulIFLevelDVBC & 0x07) << 2;
+	state->m_IFLevelDVBT = (ulIFLevelDVBT & 0x07) << 2;
+
+	state->m_EP4 = 0x20;
+	if (ulXTOut != 0)
+		state->m_EP4 |= 0x40;
+
+	state->m_EP3_Standby = ((ulStandbyMode & 0x07) << 5) | 0x0F;
+	state->m_bMaster = (ulSlave == 0);
+
+	state->m_SettlingTime = ulSettlingTime;
+
+	state->m_bFMInput = (ulFMInput == 2);
+}
+
+static bool SearchMap1(struct SMap Map[],
+		       u32 Frequency, u8 *pParam)
+{
+	int i = 0;
+
+	while ((Map[i].m_Frequency != 0) && (Frequency > Map[i].m_Frequency))
+		i += 1;
+	if (Map[i].m_Frequency == 0)
+		return false;
+	*pParam = Map[i].m_Param;
+	return true;
+}
+
+static bool SearchMap2(struct SMapI Map[],
+		       u32 Frequency, s32 *pParam)
+{
+	int i = 0;
+
+	while ((Map[i].m_Frequency != 0) &&
+	       (Frequency > Map[i].m_Frequency))
+		i += 1;
+	if (Map[i].m_Frequency == 0)
+		return false;
+	*pParam = Map[i].m_Param;
+	return true;
+}
+
+static bool SearchMap3(struct SMap2 Map[], u32 Frequency,
+		       u8 *pParam1, u8 *pParam2)
+{
+	int i = 0;
+
+	while ((Map[i].m_Frequency != 0) &&
+	       (Frequency > Map[i].m_Frequency))
+		i += 1;
+	if (Map[i].m_Frequency == 0)
+		return false;
+	*pParam1 = Map[i].m_Param1;
+	*pParam2 = Map[i].m_Param2;
+	return true;
+}
+
+static bool SearchMap4(struct SRFBandMap Map[],
+		       u32 Frequency, u8 *pRFBand)
+{
+	int i = 0;
+
+	while (i < 7 && (Frequency > Map[i].m_RF_max))
+		i += 1;
+	if (i == 7)
+		return false;
+	*pRFBand = i;
+	return true;
+}
+
+static int ThermometerRead(struct tda_state *state, u8 *pTM_Value)
+{
+	int status = 0;
+
+	do {
+		u8 Regs[16];
+		state->m_Regs[TM] |= 0x10;
+		status = UpdateReg(state, TM);
+		if (status < 0)
+			break;
+		status = Read(state, Regs);
+		if (status < 0)
+			break;
+		if (((Regs[TM] & 0x0F) == 0 && (Regs[TM] & 0x20) == 0x20) ||
+		    ((Regs[TM] & 0x0F) == 8 && (Regs[TM] & 0x20) == 0x00)) {
+			state->m_Regs[TM] ^= 0x20;
+			status = UpdateReg(state, TM);
+			if (status < 0)
+				break;
+			msleep(10);
+			status = Read(state, Regs);
+			if (status < 0)
+				break;
+		}
+		*pTM_Value = (Regs[TM] & 0x20)
+				? m_Thermometer_Map_2[Regs[TM] & 0x0F]
+				: m_Thermometer_Map_1[Regs[TM] & 0x0F] ;
+		state->m_Regs[TM] &= ~0x10;        /* Thermometer off */
+		status = UpdateReg(state, TM);
+		if (status < 0)
+			break;
+		state->m_Regs[EP4] &= ~0x03;       /* CAL_mode = 0 ????????? */
+		status = UpdateReg(state, EP4);
+		if (status < 0)
+			break;
+	} while (0);
+
+	return status;
+}
+
+static int StandBy(struct tda_state *state)
+{
+	int status = 0;
+	do {
+		state->m_Regs[EB12] &= ~0x20;  /* PD_AGC1_Det = 0 */
+		status = UpdateReg(state, EB12);
+		if (status < 0)
+			break;
+		state->m_Regs[EB18] &= ~0x83;  /* AGC1_loop_off = 0, AGC1_Gain = 6 dB */
+		status = UpdateReg(state, EB18);
+		if (status < 0)
+			break;
+		state->m_Regs[EB21] |= 0x03; /* AGC2_Gain = -6 dB */
+		state->m_Regs[EP3] = state->m_EP3_Standby;
+		status = UpdateReg(state, EP3);
+		if (status < 0)
+			break;
+		state->m_Regs[EB23] &= ~0x06; /* ForceLP_Fc2_En = 0, LP_Fc[2] = 0 */
+		status = UpdateRegs(state, EB21, EB23);
+		if (status < 0)
+			break;
+	} while (0);
+	return status;
+}
+
+static int CalcMainPLL(struct tda_state *state, u32 freq)
+{
+
+	u8  PostDiv;
+	u8  Div;
+	u64 OscFreq;
+	u32 MainDiv;
+
+	if (!SearchMap3(m_Main_PLL_Map, freq, &PostDiv, &Div))
+		return -EINVAL;
+
+	OscFreq = (u64) freq * (u64) Div;
+	OscFreq *= (u64) 16384;
+	do_div(OscFreq, (u64)16000000);
+	MainDiv = OscFreq;
+
+	state->m_Regs[MPD] = PostDiv & 0x77;
+	state->m_Regs[MD1] = ((MainDiv >> 16) & 0x7F);
+	state->m_Regs[MD2] = ((MainDiv >>  8) & 0xFF);
+	state->m_Regs[MD3] = (MainDiv & 0xFF);
+
+	return UpdateRegs(state, MPD, MD3);
+}
+
+static int CalcCalPLL(struct tda_state *state, u32 freq)
+{
+	u8 PostDiv;
+	u8 Div;
+	u64 OscFreq;
+	u32 CalDiv;
+
+	if (!SearchMap3(m_Cal_PLL_Map, freq, &PostDiv, &Div))
+		return -EINVAL;
+
+	OscFreq = (u64)freq * (u64)Div;
+	/* CalDiv = u32( OscFreq * 16384 / 16000000 ); */
+	OscFreq *= (u64)16384;
+	do_div(OscFreq, (u64)16000000);
+	CalDiv = OscFreq;
+
+	state->m_Regs[CPD] = PostDiv;
+	state->m_Regs[CD1] = ((CalDiv >> 16) & 0xFF);
+	state->m_Regs[CD2] = ((CalDiv >>  8) & 0xFF);
+	state->m_Regs[CD3] = (CalDiv & 0xFF);
+
+	return UpdateRegs(state, CPD, CD3);
+}
+
+static int CalibrateRF(struct tda_state *state,
+		       u8 RFBand, u32 freq, s32 *pCprog)
+{
+	int status = 0;
+	u8 Regs[NUM_REGS];
+	do {
+		u8 BP_Filter = 0;
+		u8 GainTaper = 0;
+		u8 RFC_K = 0;
+		u8 RFC_M = 0;
+
+		state->m_Regs[EP4] &= ~0x03; /* CAL_mode = 0 */
+		status = UpdateReg(state, EP4);
+		if (status < 0)
+			break;
+		state->m_Regs[EB18] |= 0x03;  /* AGC1_Gain = 3 */
+		status = UpdateReg(state, EB18);
+		if (status < 0)
+			break;
+
+		/* Switching off LT (as datasheet says) causes calibration on C1 to fail */
+		/* (Readout of Cprog is allways 255) */
+		if (state->m_Regs[ID] != 0x83)    /* C1: ID == 83, C2: ID == 84 */
+			state->m_Regs[EP3] |= 0x40; /* SM_LT = 1 */
+
+		if (!(SearchMap1(m_BP_Filter_Map, freq, &BP_Filter) &&
+			SearchMap1(m_GainTaper_Map, freq, &GainTaper) &&
+			SearchMap3(m_KM_Map, freq, &RFC_K, &RFC_M)))
+			return -EINVAL;
+
+		state->m_Regs[EP1] = (state->m_Regs[EP1] & ~0x07) | BP_Filter;
+		state->m_Regs[EP2] = (RFBand << 5) | GainTaper;
+
+		state->m_Regs[EB13] = (state->m_Regs[EB13] & ~0x7C) | (RFC_K << 4) | (RFC_M << 2);
+
+		status = UpdateRegs(state, EP1, EP3);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EB13);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB4] |= 0x20;    /* LO_ForceSrce = 1 */
+		status = UpdateReg(state, EB4);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB7] |= 0x20;    /* CAL_ForceSrce = 1 */
+		status = UpdateReg(state, EB7);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB14] = 0; /* RFC_Cprog = 0 */
+		status = UpdateReg(state, EB14);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB20] &= ~0x20;  /* ForceLock = 0; */
+		status = UpdateReg(state, EB20);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EP4] |= 0x03;  /* CAL_Mode = 3 */
+		status = UpdateRegs(state, EP4, EP5);
+		if (status < 0)
+			break;
+
+		status = CalcCalPLL(state, freq);
+		if (status < 0)
+			break;
+		status = CalcMainPLL(state, freq + 1000000);
+		if (status < 0)
+			break;
+
+		msleep(5);
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB4] &= ~0x20;    /* LO_ForceSrce = 0 */
+		status = UpdateReg(state, EB4);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB7] &= ~0x20;    /* CAL_ForceSrce = 0 */
+		status = UpdateReg(state, EB7);
+		if (status < 0)
+			break;
+		msleep(10);
+
+		state->m_Regs[EB20] |= 0x20;  /* ForceLock = 1; */
+		status = UpdateReg(state, EB20);
+		if (status < 0)
+			break;
+		msleep(60);
+
+		state->m_Regs[EP4] &= ~0x03;  /* CAL_Mode = 0 */
+		state->m_Regs[EP3] &= ~0x40; /* SM_LT = 0 */
+		state->m_Regs[EB18] &= ~0x03;  /* AGC1_Gain = 0 */
+		status = UpdateReg(state, EB18);
+		if (status < 0)
+			break;
+		status = UpdateRegs(state, EP3, EP4);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+
+		status = ReadExtented(state, Regs);
+		if (status < 0)
+			break;
+
+		*pCprog = Regs[EB14];
+
+	} while (0);
+	return status;
+}
+
+static int RFTrackingFiltersInit(struct tda_state *state,
+				 u8 RFBand)
+{
+	int status = 0;
+
+	u32   RF1 = m_RF_Band_Map[RFBand].m_RF1_Default;
+	u32   RF2 = m_RF_Band_Map[RFBand].m_RF2_Default;
+	u32   RF3 = m_RF_Band_Map[RFBand].m_RF3_Default;
+	bool    bcal = false;
+
+	s32    Cprog_cal1 = 0;
+	s32    Cprog_table1 = 0;
+	s32    Cprog_cal2 = 0;
+	s32    Cprog_table2 = 0;
+	s32    Cprog_cal3 = 0;
+	s32    Cprog_table3 = 0;
+
+	state->m_RF_A1[RFBand] = 0;
+	state->m_RF_B1[RFBand] = 0;
+	state->m_RF_A2[RFBand] = 0;
+	state->m_RF_B2[RFBand] = 0;
+
+	do {
+		status = PowerScan(state, RFBand, RF1, &RF1, &bcal);
+		if (status < 0)
+			break;
+		if (bcal) {
+			status = CalibrateRF(state, RFBand, RF1, &Cprog_cal1);
+			if (status < 0)
+				break;
+		}
+		SearchMap2(m_RF_Cal_Map, RF1, &Cprog_table1);
+		if (!bcal)
+			Cprog_cal1 = Cprog_table1;
+		state->m_RF_B1[RFBand] = Cprog_cal1 - Cprog_table1;
+		/* state->m_RF_A1[RF_Band] = ???? */
+
+		if (RF2 == 0)
+			break;
+
+		status = PowerScan(state, RFBand, RF2, &RF2, &bcal);
+		if (status < 0)
+			break;
+		if (bcal) {
+			status = CalibrateRF(state, RFBand, RF2, &Cprog_cal2);
+			if (status < 0)
+				break;
+		}
+		SearchMap2(m_RF_Cal_Map, RF2, &Cprog_table2);
+		if (!bcal)
+			Cprog_cal2 = Cprog_table2;
+
+		state->m_RF_A1[RFBand] =
+			(Cprog_cal2 - Cprog_table2 - Cprog_cal1 + Cprog_table1) /
+			((s32)(RF2) - (s32)(RF1));
+
+		if (RF3 == 0)
+			break;
+
+		status = PowerScan(state, RFBand, RF3, &RF3, &bcal);
+		if (status < 0)
+			break;
+		if (bcal) {
+			status = CalibrateRF(state, RFBand, RF3, &Cprog_cal3);
+			if (status < 0)
+				break;
+		}
+		SearchMap2(m_RF_Cal_Map, RF3, &Cprog_table3);
+		if (!bcal)
+			Cprog_cal3 = Cprog_table3;
+		state->m_RF_A2[RFBand] = (Cprog_cal3 - Cprog_table3 - Cprog_cal2 + Cprog_table2) / ((s32)(RF3) - (s32)(RF2));
+		state->m_RF_B2[RFBand] = Cprog_cal2 - Cprog_table2;
+
+	} while (0);
+
+	state->m_RF1[RFBand] = RF1;
+	state->m_RF2[RFBand] = RF2;
+	state->m_RF3[RFBand] = RF3;
+
+#if 0
+	printk(KERN_ERR "tda18271c2dd: %s %d RF1 = %d A1 = %d B1 = %d RF2 = %d A2 = %d B2 = %d RF3 = %d\n", __func__,
+	       RFBand, RF1, state->m_RF_A1[RFBand], state->m_RF_B1[RFBand], RF2,
+	       state->m_RF_A2[RFBand], state->m_RF_B2[RFBand], RF3);
+#endif
+
+	return status;
+}
+
+static int PowerScan(struct tda_state *state,
+		     u8 RFBand, u32 RF_in, u32 *pRF_Out, bool *pbcal)
+{
+	int status = 0;
+	do {
+		u8   Gain_Taper = 0;
+		s32  RFC_Cprog = 0;
+		u8   CID_Target = 0;
+		u8   CountLimit = 0;
+		u32  freq_MainPLL;
+		u8   Regs[NUM_REGS];
+		u8   CID_Gain;
+		s32  Count = 0;
+		int  sign  = 1;
+		bool wait = false;
+
+		if (!(SearchMap2(m_RF_Cal_Map, RF_in, &RFC_Cprog) &&
+		      SearchMap1(m_GainTaper_Map, RF_in, &Gain_Taper) &&
+		      SearchMap3(m_CID_Target_Map, RF_in, &CID_Target, &CountLimit))) {
+
+			printk(KERN_ERR "tda18271c2dd: %s Search map failed\n", __func__);
+			return -EINVAL;
+		}
+
+		state->m_Regs[EP2] = (RFBand << 5) | Gain_Taper;
+		state->m_Regs[EB14] = (RFC_Cprog);
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EB14);
+		if (status < 0)
+			break;
+
+		freq_MainPLL = RF_in + 1000000;
+		status = CalcMainPLL(state, freq_MainPLL);
+		if (status < 0)
+			break;
+		msleep(5);
+		state->m_Regs[EP4] = (state->m_Regs[EP4] & ~0x03) | 1;    /* CAL_mode = 1 */
+		status = UpdateReg(state, EP4);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP2);  /* Launch power measurement */
+		if (status < 0)
+			break;
+		status = ReadExtented(state, Regs);
+		if (status < 0)
+			break;
+		CID_Gain = Regs[EB10] & 0x3F;
+		state->m_Regs[ID] = Regs[ID];  /* Chip version, (needed for C1 workarround in CalibrateRF) */
+
+		*pRF_Out = RF_in;
+
+		while (CID_Gain < CID_Target) {
+			freq_MainPLL = RF_in + sign * Count + 1000000;
+			status = CalcMainPLL(state, freq_MainPLL);
+			if (status < 0)
+				break;
+			msleep(wait ? 5 : 1);
+			wait = false;
+			status = UpdateReg(state, EP2);  /* Launch power measurement */
+			if (status < 0)
+				break;
+			status = ReadExtented(state, Regs);
+			if (status < 0)
+				break;
+			CID_Gain = Regs[EB10] & 0x3F;
+			Count += 200000;
+
+			if (Count < CountLimit * 100000)
+				continue;
+			if (sign < 0)
+				break;
+
+			sign = -sign;
+			Count = 200000;
+			wait = true;
+		}
+		status = status;
+		if (status < 0)
+			break;
+		if (CID_Gain >= CID_Target) {
+			*pbcal = true;
+			*pRF_Out = freq_MainPLL - 1000000;
+		} else
+			*pbcal = false;
+	} while (0);
+
+	return status;
+}
+
+static int PowerScanInit(struct tda_state *state)
+{
+	int status = 0;
+	do {
+		state->m_Regs[EP3] = (state->m_Regs[EP3] & ~0x1F) | 0x12;
+		state->m_Regs[EP4] = (state->m_Regs[EP4] & ~0x1F); /* If level = 0, Cal mode = 0 */
+		status = UpdateRegs(state, EP3, EP4);
+		if (status < 0)
+			break;
+		state->m_Regs[EB18] = (state->m_Regs[EB18] & ~0x03); /* AGC 1 Gain = 0 */
+		status = UpdateReg(state, EB18);
+		if (status < 0)
+			break;
+		state->m_Regs[EB21] = (state->m_Regs[EB21] & ~0x03); /* AGC 2 Gain = 0 (Datasheet = 3) */
+		state->m_Regs[EB23] = (state->m_Regs[EB23] | 0x06); /* ForceLP_Fc2_En = 1, LPFc[2] = 1 */
+		status = UpdateRegs(state, EB21, EB23);
+		if (status < 0)
+			break;
+	} while (0);
+	return status;
+}
+
+static int CalcRFFilterCurve(struct tda_state *state)
+{
+	int status = 0;
+	do {
+		msleep(200);      /* Temperature stabilisation */
+		status = PowerScanInit(state);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 0);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 1);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 2);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 3);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 4);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 5);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 6);
+		if (status < 0)
+			break;
+		status = ThermometerRead(state, &state->m_TMValue_RFCal); /* also switches off Cal mode !!! */
+		if (status < 0)
+			break;
+	} while (0);
+
+	return status;
+}
+
+static int FixedContentsI2CUpdate(struct tda_state *state)
+{
+	static u8 InitRegs[] = {
+		0x08, 0x80, 0xC6,
+		0xDF, 0x16, 0x60, 0x80,
+		0x80, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00,
+		0xFC, 0x01, 0x84, 0x41,
+		0x01, 0x84, 0x40, 0x07,
+		0x00, 0x00, 0x96, 0x3F,
+		0xC1, 0x00, 0x8F, 0x00,
+		0x00, 0x8C, 0x00, 0x20,
+		0xB3, 0x48, 0xB0,
+	};
+	int status = 0;
+	memcpy(&state->m_Regs[TM], InitRegs, EB23 - TM + 1);
+	do {
+		status = UpdateRegs(state, TM, EB23);
+		if (status < 0)
+			break;
+
+		/* AGC1 gain setup */
+		state->m_Regs[EB17] = 0x00;
+		status = UpdateReg(state, EB17);
+		if (status < 0)
+			break;
+		state->m_Regs[EB17] = 0x03;
+		status = UpdateReg(state, EB17);
+		if (status < 0)
+			break;
+		state->m_Regs[EB17] = 0x43;
+		status = UpdateReg(state, EB17);
+		if (status < 0)
+			break;
+		state->m_Regs[EB17] = 0x4C;
+		status = UpdateReg(state, EB17);
+		if (status < 0)
+			break;
+
+		/* IRC Cal Low band */
+		state->m_Regs[EP3] = 0x1F;
+		state->m_Regs[EP4] = 0x66;
+		state->m_Regs[EP5] = 0x81;
+		state->m_Regs[CPD] = 0xCC;
+		state->m_Regs[CD1] = 0x6C;
+		state->m_Regs[CD2] = 0x00;
+		state->m_Regs[CD3] = 0x00;
+		state->m_Regs[MPD] = 0xC5;
+		state->m_Regs[MD1] = 0x77;
+		state->m_Regs[MD2] = 0x08;
+		state->m_Regs[MD3] = 0x00;
+		status = UpdateRegs(state, EP2, MD3); /* diff between sw and datasheet (ep3-md3) */
+		if (status < 0)
+			break;
+
+#if 0
+		state->m_Regs[EB4] = 0x61;          /* missing in sw */
+		status = UpdateReg(state, EB4);
+		if (status < 0)
+			break;
+		msleep(1);
+		state->m_Regs[EB4] = 0x41;
+		status = UpdateReg(state, EB4);
+		if (status < 0)
+			break;
+#endif
+
+		msleep(5);
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+		msleep(5);
+
+		state->m_Regs[EP5] = 0x85;
+		state->m_Regs[CPD] = 0xCB;
+		state->m_Regs[CD1] = 0x66;
+		state->m_Regs[CD2] = 0x70;
+		status = UpdateRegs(state, EP3, CD3);
+		if (status < 0)
+			break;
+		msleep(5);
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		msleep(30);
+
+		/* IRC Cal mid band */
+		state->m_Regs[EP5] = 0x82;
+		state->m_Regs[CPD] = 0xA8;
+		state->m_Regs[CD2] = 0x00;
+		state->m_Regs[MPD] = 0xA1; /* Datasheet = 0xA9 */
+		state->m_Regs[MD1] = 0x73;
+		state->m_Regs[MD2] = 0x1A;
+		status = UpdateRegs(state, EP3, MD3);
+		if (status < 0)
+			break;
+
+		msleep(5);
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+		msleep(5);
+
+		state->m_Regs[EP5] = 0x86;
+		state->m_Regs[CPD] = 0xA8;
+		state->m_Regs[CD1] = 0x66;
+		state->m_Regs[CD2] = 0xA0;
+		status = UpdateRegs(state, EP3, CD3);
+		if (status < 0)
+			break;
+		msleep(5);
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		msleep(30);
+
+		/* IRC Cal high band */
+		state->m_Regs[EP5] = 0x83;
+		state->m_Regs[CPD] = 0x98;
+		state->m_Regs[CD1] = 0x65;
+		state->m_Regs[CD2] = 0x00;
+		state->m_Regs[MPD] = 0x91;  /* Datasheet = 0x91 */
+		state->m_Regs[MD1] = 0x71;
+		state->m_Regs[MD2] = 0xCD;
+		status = UpdateRegs(state, EP3, MD3);
+		if (status < 0)
+			break;
+		msleep(5);
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+		msleep(5);
+		state->m_Regs[EP5] = 0x87;
+		state->m_Regs[CD1] = 0x65;
+		state->m_Regs[CD2] = 0x50;
+		status = UpdateRegs(state, EP3, CD3);
+		if (status < 0)
+			break;
+		msleep(5);
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		msleep(30);
+
+		/* Back to normal */
+		state->m_Regs[EP4] = 0x64;
+		status = UpdateReg(state, EP4);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+
+	} while (0);
+	return status;
+}
+
+static int InitCal(struct tda_state *state)
+{
+	int status = 0;
+
+	do {
+		status = FixedContentsI2CUpdate(state);
+		if (status < 0)
+			break;
+		status = CalcRFFilterCurve(state);
+		if (status < 0)
+			break;
+		status = StandBy(state);
+		if (status < 0)
+			break;
+		/* m_bInitDone = true; */
+	} while (0);
+	return status;
+};
+
+static int RFTrackingFiltersCorrection(struct tda_state *state,
+				       u32 Frequency)
+{
+	int status = 0;
+	s32 Cprog_table;
+	u8 RFBand;
+	u8 dCoverdT;
+
+	if (!SearchMap2(m_RF_Cal_Map, Frequency, &Cprog_table) ||
+	    !SearchMap4(m_RF_Band_Map, Frequency, &RFBand) ||
+	    !SearchMap1(m_RF_Cal_DC_Over_DT_Map, Frequency, &dCoverdT))
+
+		return -EINVAL;
+
+	do {
+		u8 TMValue_Current;
+		u32   RF1 = state->m_RF1[RFBand];
+		u32   RF2 = state->m_RF1[RFBand];
+		u32   RF3 = state->m_RF1[RFBand];
+		s32    RF_A1 = state->m_RF_A1[RFBand];
+		s32    RF_B1 = state->m_RF_B1[RFBand];
+		s32    RF_A2 = state->m_RF_A2[RFBand];
+		s32    RF_B2 = state->m_RF_B2[RFBand];
+		s32 Capprox = 0;
+		int TComp;
+
+		state->m_Regs[EP3] &= ~0xE0;  /* Power up */
+		status = UpdateReg(state, EP3);
+		if (status < 0)
+			break;
+
+		status = ThermometerRead(state, &TMValue_Current);
+		if (status < 0)
+			break;
+
+		if (RF3 == 0 || Frequency < RF2)
+			Capprox = RF_A1 * ((s32)(Frequency) - (s32)(RF1)) + RF_B1 + Cprog_table;
+		else
+			Capprox = RF_A2 * ((s32)(Frequency) - (s32)(RF2)) + RF_B2 + Cprog_table;
+
+		TComp = (int)(dCoverdT) * ((int)(TMValue_Current) - (int)(state->m_TMValue_RFCal))/1000;
+
+		Capprox += TComp;
+
+		if (Capprox < 0)
+			Capprox = 0;
+		else if (Capprox > 255)
+			Capprox = 255;
+
+
+		/* TODO Temperature compensation. There is defenitely a scale factor */
+		/*      missing in the datasheet, so leave it out for now.           */
+		state->m_Regs[EB14] = Capprox;
+
+		status = UpdateReg(state, EB14);
+		if (status < 0)
+			break;
+
+	} while (0);
+	return status;
+}
+
+static int ChannelConfiguration(struct tda_state *state,
+				u32 Frequency, int Standard)
+{
+
+	s32 IntermediateFrequency = m_StandardTable[Standard].m_IFFrequency;
+	int status = 0;
+
+	u8 BP_Filter = 0;
+	u8 RF_Band = 0;
+	u8 GainTaper = 0;
+	u8 IR_Meas = 0;
+
+	state->IF = IntermediateFrequency;
+	/* printk("tda18271c2dd: %s Freq = %d Standard = %d IF = %d\n", __func__, Frequency, Standard, IntermediateFrequency); */
+	/* get values from tables */
+
+	if (!(SearchMap1(m_BP_Filter_Map, Frequency, &BP_Filter) &&
+	       SearchMap1(m_GainTaper_Map, Frequency, &GainTaper) &&
+	       SearchMap1(m_IR_Meas_Map, Frequency, &IR_Meas) &&
+	       SearchMap4(m_RF_Band_Map, Frequency, &RF_Band))) {
+
+		printk(KERN_ERR "tda18271c2dd: %s SearchMap failed\n", __func__);
+		return -EINVAL;
+	}
+
+	do {
+		state->m_Regs[EP3] = (state->m_Regs[EP3] & ~0x1F) | m_StandardTable[Standard].m_EP3_4_0;
+		state->m_Regs[EP3] &= ~0x04;   /* switch RFAGC to high speed mode */
+
+		/* m_EP4 default for XToutOn, CAL_Mode (0) */
+		state->m_Regs[EP4] = state->m_EP4 | ((Standard > HF_AnalogMax) ? state->m_IFLevelDigital : state->m_IFLevelAnalog);
+		/* state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDigital; */
+		if (Standard <= HF_AnalogMax)
+			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelAnalog;
+		else if (Standard <= HF_ATSC)
+			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDVBT;
+		else if (Standard <= HF_DVBC)
+			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDVBC;
+		else
+			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDigital;
+
+		if ((Standard == HF_FM_Radio) && state->m_bFMInput)
+			state->m_Regs[EP4] |= 80;
+
+		state->m_Regs[MPD] &= ~0x80;
+		if (Standard > HF_AnalogMax)
+			state->m_Regs[MPD] |= 0x80; /* Add IF_notch for digital */
+
+		state->m_Regs[EB22] = m_StandardTable[Standard].m_EB22;
+
+		/* Note: This is missing from flowchart in TDA18271 specification ( 1.5 MHz cutoff for FM ) */
+		if (Standard == HF_FM_Radio)
+			state->m_Regs[EB23] |=  0x06; /* ForceLP_Fc2_En = 1, LPFc[2] = 1 */
+		else
+			state->m_Regs[EB23] &= ~0x06; /* ForceLP_Fc2_En = 0, LPFc[2] = 0 */
+
+		status = UpdateRegs(state, EB22, EB23);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EP1] = (state->m_Regs[EP1] & ~0x07) | 0x40 | BP_Filter;   /* Dis_Power_level = 1, Filter */
+		state->m_Regs[EP5] = (state->m_Regs[EP5] & ~0x07) | IR_Meas;
+		state->m_Regs[EP2] = (RF_Band << 5) | GainTaper;
+
+		state->m_Regs[EB1] = (state->m_Regs[EB1] & ~0x07) |
+			(state->m_bMaster ? 0x04 : 0x00); /* CALVCO_FortLOn = MS */
+		/* AGC1_always_master = 0 */
+		/* AGC_firstn = 0 */
+		status = UpdateReg(state, EB1);
+		if (status < 0)
+			break;
+
+		if (state->m_bMaster) {
+			status = CalcMainPLL(state, Frequency + IntermediateFrequency);
+			if (status < 0)
+				break;
+			status = UpdateRegs(state, TM, EP5);
+			if (status < 0)
+				break;
+			state->m_Regs[EB4] |= 0x20;    /* LO_forceSrce = 1 */
+			status = UpdateReg(state, EB4);
+			if (status < 0)
+				break;
+			msleep(1);
+			state->m_Regs[EB4] &= ~0x20;   /* LO_forceSrce = 0 */
+			status = UpdateReg(state, EB4);
+			if (status < 0)
+				break;
+		} else {
+			u8 PostDiv = 0;
+			u8 Div;
+			status = CalcCalPLL(state, Frequency + IntermediateFrequency);
+			if (status < 0)
+				break;
+
+			SearchMap3(m_Cal_PLL_Map, Frequency + IntermediateFrequency, &PostDiv, &Div);
+			state->m_Regs[MPD] = (state->m_Regs[MPD] & ~0x7F) | (PostDiv & 0x77);
+			status = UpdateReg(state, MPD);
+			if (status < 0)
+				break;
+			status = UpdateRegs(state, TM, EP5);
+			if (status < 0)
+				break;
+
+			state->m_Regs[EB7] |= 0x20;    /* CAL_forceSrce = 1 */
+			status = UpdateReg(state, EB7);
+			if (status < 0)
+				break;
+			msleep(1);
+			state->m_Regs[EB7] &= ~0x20;   /* CAL_forceSrce = 0 */
+			status = UpdateReg(state, EB7);
+			if (status < 0)
+				break;
+		}
+		msleep(20);
+		if (Standard != HF_FM_Radio)
+			state->m_Regs[EP3] |= 0x04;    /* RFAGC to normal mode */
+		status = UpdateReg(state, EP3);
+		if (status < 0)
+			break;
+
+	} while (0);
+	return status;
+}
+
+static int sleep(struct dvb_frontend *fe)
+{
+	struct tda_state *state = fe->tuner_priv;
+
+	StandBy(state);
+	return 0;
+}
+
+static int init(struct dvb_frontend *fe)
+{
+	return 0;
+}
+
+static int release(struct dvb_frontend *fe)
+{
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+	return 0;
+}
+
+/*
+ * As defined on EN 300 429 Annex A and on ITU-T J.83 annex A, the DVB-C
+ * roll-off factor is 0.15.
+ * According with the specs, the amount of the needed bandwith is given by:
+ *	Bw = Symbol_rate * (1 + 0.15)
+ * As such, the maximum symbol rate supported by 6 MHz is
+ *	max_symbol_rate = 6 MHz / 1.15 = 5217391 Bauds
+ *NOTE: For ITU-T J.83 Annex C, the roll-off factor is 0.13. So:
+ *	max_symbol_rate = 6 MHz / 1.13 = 5309735 Baud
+ *	That means that an adjustment is needed for Japan,
+ *	but, as currently DRX-K is hardcoded to Annex A, let's stick
+ *	with 0.15 roll-off factor.
+ */
+#define MAX_SYMBOL_RATE_6MHz	5217391
+
+static int set_params(struct dvb_frontend *fe,
+		      struct dvb_frontend_parameters *params)
+{
+	struct tda_state *state = fe->tuner_priv;
+	int status = 0;
+	int Standard;
+
+	state->m_Frequency = params->frequency;
+
+	if (fe->ops.info.type == FE_OFDM)
+		switch (params->u.ofdm.bandwidth) {
+		case BANDWIDTH_6_MHZ:
+			Standard = HF_DVBT_6MHZ;
+			break;
+		case BANDWIDTH_7_MHZ:
+			Standard = HF_DVBT_7MHZ;
+			break;
+		default:
+		case BANDWIDTH_8_MHZ:
+			Standard = HF_DVBT_8MHZ;
+			break;
+		}
+	else if (fe->ops.info.type == FE_QAM) {
+		if (params->u.qam.symbol_rate <= MAX_SYMBOL_RATE_6MHz)
+			Standard = HF_DVBC_6MHZ;
+		else
+			Standard = HF_DVBC_8MHZ;
+	} else
+		return -EINVAL;
+	do {
+		status = RFTrackingFiltersCorrection(state, params->frequency);
+		if (status < 0)
+			break;
+		status = ChannelConfiguration(state, params->frequency, Standard);
+		if (status < 0)
+			break;
+
+		msleep(state->m_SettlingTime);  /* Allow AGC's to settle down */
+	} while (0);
+	return status;
+}
+
+#if 0
+static int GetSignalStrength(s32 *pSignalStrength, u32 RFAgc, u32 IFAgc)
+{
+	if (IFAgc < 500) {
+		/* Scale this from 0 to 50000 */
+		*pSignalStrength = IFAgc * 100;
+	} else {
+		/* Scale range 500-1500 to 50000-80000 */
+		*pSignalStrength = 50000 + (IFAgc - 500) * 30;
+	}
+
+	return 0;
+}
+#endif
+
+static int get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct tda_state *state = fe->tuner_priv;
+
+	*frequency = state->IF;
+	return 0;
+}
+
+static int get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+	/* struct tda_state *state = fe->tuner_priv; */
+	/* *bandwidth = priv->bandwidth; */
+	return 0;
+}
+
+
+static struct dvb_tuner_ops tuner_ops = {
+	.info = {
+		.name = "NXP TDA18271C2D",
+		.frequency_min  =  47125000,
+		.frequency_max  = 865000000,
+		.frequency_step =     62500
+	},
+	.init              = init,
+	.sleep             = sleep,
+	.set_params        = set_params,
+	.release           = release,
+	.get_frequency     = get_frequency,
+	.get_bandwidth     = get_bandwidth,
+};
+
+struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe,
+					 struct i2c_adapter *i2c, u8 adr)
+{
+	struct tda_state *state;
+
+	state = kzalloc(sizeof(struct tda_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	fe->tuner_priv = state;
+	state->adr = adr;
+	state->i2c = i2c;
+	memcpy(&fe->ops.tuner_ops, &tuner_ops, sizeof(struct dvb_tuner_ops));
+	reset(state);
+	InitCal(state);
+
+	return fe;
+}
+EXPORT_SYMBOL_GPL(tda18271c2dd_attach);
+
+MODULE_DESCRIPTION("TDA18271C2 driver");
+MODULE_AUTHOR("DD");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda18271c2dd.h b/drivers/media/dvb/frontends/tda18271c2dd.h
new file mode 100644
index 0000000..1389c74
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda18271c2dd.h
@@ -0,0 +1,16 @@
+#ifndef _TDA18271C2DD_H_
+#define _TDA18271C2DD_H_
+#if defined(CONFIG_DVB_TDA18271C2DD) || (defined(CONFIG_DVB_TDA18271C2DD_MODULE) \
+        && defined(MODULE))
+struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe,
+					 struct i2c_adapter *i2c, u8 adr);
+#else
+static inline struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe,
+					 struct i2c_adapter *i2c, u8 adr)
+{
+        printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+        return NULL;
+}
+#endif
+
+#endif
diff --git a/drivers/media/dvb/frontends/tda18271c2dd_maps.h b/drivers/media/dvb/frontends/tda18271c2dd_maps.h
new file mode 100644
index 0000000..b87661b
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda18271c2dd_maps.h
@@ -0,0 +1,814 @@
+enum HF_S {
+	HF_None = 0, HF_B, HF_DK, HF_G, HF_I, HF_L, HF_L1, HF_MN, HF_FM_Radio,
+	HF_AnalogMax, HF_DVBT_6MHZ, HF_DVBT_7MHZ, HF_DVBT_8MHZ,
+	HF_DVBT, HF_ATSC,  HF_DVBC_6MHZ,  HF_DVBC_7MHZ,
+	HF_DVBC_8MHZ, HF_DVBC
+};
+
+struct SStandardParam m_StandardTable[] = {
+	{       0,        0, 0x00, 0x00 },    /* HF_None */
+	{ 6000000,  7000000, 0x1D, 0x2C },    /* HF_B, */
+	{ 6900000,  8000000, 0x1E, 0x2C },    /* HF_DK, */
+	{ 7100000,  8000000, 0x1E, 0x2C },    /* HF_G, */
+	{ 7250000,  8000000, 0x1E, 0x2C },    /* HF_I, */
+	{ 6900000,  8000000, 0x1E, 0x2C },    /* HF_L, */
+	{ 1250000,  8000000, 0x1E, 0x2C },    /* HF_L1, */
+	{ 5400000,  6000000, 0x1C, 0x2C },    /* HF_MN, */
+	{ 1250000,   500000, 0x18, 0x2C },    /* HF_FM_Radio, */
+	{       0,        0, 0x00, 0x00 },    /* HF_AnalogMax (Unused) */
+	{ 3300000,  6000000, 0x1C, 0x58 },    /* HF_DVBT_6MHZ */
+	{ 3500000,  7000000, 0x1C, 0x37 },    /* HF_DVBT_7MHZ */
+	{ 4000000,  8000000, 0x1D, 0x37 },    /* HF_DVBT_8MHZ */
+	{       0,        0, 0x00, 0x00 },    /* HF_DVBT (Unused) */
+	{ 5000000,  6000000, 0x1C, 0x37 },    /* HF_ATSC  (center = 3.25 MHz) */
+	{ 4000000,  6000000, 0x1D, 0x58 },    /* HF_DVBC_6MHZ (Chicago) */
+	{ 4500000,  7000000, 0x1E, 0x37 },    /* HF_DVBC_7MHZ (not documented by NXP) */
+	{ 5000000,  8000000, 0x1F, 0x37 },    /* HF_DVBC_8MHZ */
+	{       0,        0, 0x00, 0x00 },    /* HF_DVBC (Unused) */
+};
+
+struct SMap  m_BP_Filter_Map[] = {
+	{   62000000,  0x00 },
+	{   84000000,  0x01 },
+	{  100000000,  0x02 },
+	{  140000000,  0x03 },
+	{  170000000,  0x04 },
+	{  180000000,  0x05 },
+	{  865000000,  0x06 },
+	{          0,  0x00 },    /* Table End */
+};
+
+static struct SMapI m_RF_Cal_Map[] = {
+	{   41000000,  0x0F },
+	{   43000000,  0x1C },
+	{   45000000,  0x2F },
+	{   46000000,  0x39 },
+	{   47000000,  0x40 },
+	{   47900000,  0x50 },
+	{   49100000,  0x16 },
+	{   50000000,  0x18 },
+	{   51000000,  0x20 },
+	{   53000000,  0x28 },
+	{   55000000,  0x2B },
+	{   56000000,  0x32 },
+	{   57000000,  0x35 },
+	{   58000000,  0x3E },
+	{   59000000,  0x43 },
+	{   60000000,  0x4E },
+	{   61100000,  0x55 },
+	{   63000000,  0x0F },
+	{   64000000,  0x11 },
+	{   65000000,  0x12 },
+	{   66000000,  0x15 },
+	{   67000000,  0x16 },
+	{   68000000,  0x17 },
+	{   70000000,  0x19 },
+	{   71000000,  0x1C },
+	{   72000000,  0x1D },
+	{   73000000,  0x1F },
+	{   74000000,  0x20 },
+	{   75000000,  0x21 },
+	{   76000000,  0x24 },
+	{   77000000,  0x25 },
+	{   78000000,  0x27 },
+	{   80000000,  0x28 },
+	{   81000000,  0x29 },
+	{   82000000,  0x2D },
+	{   83000000,  0x2E },
+	{   84000000,  0x2F },
+	{   85000000,  0x31 },
+	{   86000000,  0x33 },
+	{   87000000,  0x34 },
+	{   88000000,  0x35 },
+	{   89000000,  0x37 },
+	{   90000000,  0x38 },
+	{   91000000,  0x39 },
+	{   93000000,  0x3C },
+	{   94000000,  0x3E },
+	{   95000000,  0x3F },
+	{   96000000,  0x40 },
+	{   97000000,  0x42 },
+	{   99000000,  0x45 },
+	{  100000000,  0x46 },
+	{  102000000,  0x48 },
+	{  103000000,  0x4A },
+	{  105000000,  0x4D },
+	{  106000000,  0x4E },
+	{  107000000,  0x50 },
+	{  108000000,  0x51 },
+	{  110000000,  0x54 },
+	{  111000000,  0x56 },
+	{  112000000,  0x57 },
+	{  113000000,  0x58 },
+	{  114000000,  0x59 },
+	{  115000000,  0x5C },
+	{  116000000,  0x5D },
+	{  117000000,  0x5F },
+	{  119000000,  0x60 },
+	{  120000000,  0x64 },
+	{  121000000,  0x65 },
+	{  122000000,  0x66 },
+	{  123000000,  0x68 },
+	{  124000000,  0x69 },
+	{  125000000,  0x6C },
+	{  126000000,  0x6D },
+	{  127000000,  0x6E },
+	{  128000000,  0x70 },
+	{  129000000,  0x71 },
+	{  130000000,  0x75 },
+	{  131000000,  0x77 },
+	{  132000000,  0x78 },
+	{  133000000,  0x7B },
+	{  134000000,  0x7E },
+	{  135000000,  0x81 },
+	{  136000000,  0x82 },
+	{  137000000,  0x87 },
+	{  138000000,  0x88 },
+	{  139000000,  0x8D },
+	{  140000000,  0x8E },
+	{  141000000,  0x91 },
+	{  142000000,  0x95 },
+	{  143000000,  0x9A },
+	{  144000000,  0x9D },
+	{  145000000,  0xA1 },
+	{  146000000,  0xA2 },
+	{  147000000,  0xA4 },
+	{  148000000,  0xA9 },
+	{  149000000,  0xAE },
+	{  150000000,  0xB0 },
+	{  151000000,  0xB1 },
+	{  152000000,  0xB7 },
+	{  152600000,  0xBD },
+	{  154000000,  0x20 },
+	{  155000000,  0x22 },
+	{  156000000,  0x24 },
+	{  157000000,  0x25 },
+	{  158000000,  0x27 },
+	{  159000000,  0x29 },
+	{  160000000,  0x2C },
+	{  161000000,  0x2D },
+	{  163000000,  0x2E },
+	{  164000000,  0x2F },
+	{  164700000,  0x30 },
+	{  166000000,  0x11 },
+	{  167000000,  0x12 },
+	{  168000000,  0x13 },
+	{  169000000,  0x14 },
+	{  170000000,  0x15 },
+	{  172000000,  0x16 },
+	{  173000000,  0x17 },
+	{  174000000,  0x18 },
+	{  175000000,  0x1A },
+	{  176000000,  0x1B },
+	{  178000000,  0x1D },
+	{  179000000,  0x1E },
+	{  180000000,  0x1F },
+	{  181000000,  0x20 },
+	{  182000000,  0x21 },
+	{  183000000,  0x22 },
+	{  184000000,  0x24 },
+	{  185000000,  0x25 },
+	{  186000000,  0x26 },
+	{  187000000,  0x27 },
+	{  188000000,  0x29 },
+	{  189000000,  0x2A },
+	{  190000000,  0x2C },
+	{  191000000,  0x2D },
+	{  192000000,  0x2E },
+	{  193000000,  0x2F },
+	{  194000000,  0x30 },
+	{  195000000,  0x33 },
+	{  196000000,  0x35 },
+	{  198000000,  0x36 },
+	{  200000000,  0x38 },
+	{  201000000,  0x3C },
+	{  202000000,  0x3D },
+	{  203500000,  0x3E },
+	{  206000000,  0x0E },
+	{  208000000,  0x0F },
+	{  212000000,  0x10 },
+	{  216000000,  0x11 },
+	{  217000000,  0x12 },
+	{  218000000,  0x13 },
+	{  220000000,  0x14 },
+	{  222000000,  0x15 },
+	{  225000000,  0x16 },
+	{  228000000,  0x17 },
+	{  231000000,  0x18 },
+	{  234000000,  0x19 },
+	{  235000000,  0x1A },
+	{  236000000,  0x1B },
+	{  237000000,  0x1C },
+	{  240000000,  0x1D },
+	{  242000000,  0x1E },
+	{  244000000,  0x1F },
+	{  247000000,  0x20 },
+	{  249000000,  0x21 },
+	{  252000000,  0x22 },
+	{  253000000,  0x23 },
+	{  254000000,  0x24 },
+	{  256000000,  0x25 },
+	{  259000000,  0x26 },
+	{  262000000,  0x27 },
+	{  264000000,  0x28 },
+	{  267000000,  0x29 },
+	{  269000000,  0x2A },
+	{  271000000,  0x2B },
+	{  273000000,  0x2C },
+	{  275000000,  0x2D },
+	{  277000000,  0x2E },
+	{  279000000,  0x2F },
+	{  282000000,  0x30 },
+	{  284000000,  0x31 },
+	{  286000000,  0x32 },
+	{  287000000,  0x33 },
+	{  290000000,  0x34 },
+	{  293000000,  0x35 },
+	{  295000000,  0x36 },
+	{  297000000,  0x37 },
+	{  300000000,  0x38 },
+	{  303000000,  0x39 },
+	{  305000000,  0x3A },
+	{  306000000,  0x3B },
+	{  307000000,  0x3C },
+	{  310000000,  0x3D },
+	{  312000000,  0x3E },
+	{  315000000,  0x3F },
+	{  318000000,  0x40 },
+	{  320000000,  0x41 },
+	{  323000000,  0x42 },
+	{  324000000,  0x43 },
+	{  325000000,  0x44 },
+	{  327000000,  0x45 },
+	{  331000000,  0x46 },
+	{  334000000,  0x47 },
+	{  337000000,  0x48 },
+	{  339000000,  0x49 },
+	{  340000000,  0x4A },
+	{  341000000,  0x4B },
+	{  343000000,  0x4C },
+	{  345000000,  0x4D },
+	{  349000000,  0x4E },
+	{  352000000,  0x4F },
+	{  353000000,  0x50 },
+	{  355000000,  0x51 },
+	{  357000000,  0x52 },
+	{  359000000,  0x53 },
+	{  361000000,  0x54 },
+	{  362000000,  0x55 },
+	{  364000000,  0x56 },
+	{  368000000,  0x57 },
+	{  370000000,  0x58 },
+	{  372000000,  0x59 },
+	{  375000000,  0x5A },
+	{  376000000,  0x5B },
+	{  377000000,  0x5C },
+	{  379000000,  0x5D },
+	{  382000000,  0x5E },
+	{  384000000,  0x5F },
+	{  385000000,  0x60 },
+	{  386000000,  0x61 },
+	{  388000000,  0x62 },
+	{  390000000,  0x63 },
+	{  393000000,  0x64 },
+	{  394000000,  0x65 },
+	{  396000000,  0x66 },
+	{  397000000,  0x67 },
+	{  398000000,  0x68 },
+	{  400000000,  0x69 },
+	{  402000000,  0x6A },
+	{  403000000,  0x6B },
+	{  407000000,  0x6C },
+	{  408000000,  0x6D },
+	{  409000000,  0x6E },
+	{  410000000,  0x6F },
+	{  411000000,  0x70 },
+	{  412000000,  0x71 },
+	{  413000000,  0x72 },
+	{  414000000,  0x73 },
+	{  417000000,  0x74 },
+	{  418000000,  0x75 },
+	{  420000000,  0x76 },
+	{  422000000,  0x77 },
+	{  423000000,  0x78 },
+	{  424000000,  0x79 },
+	{  427000000,  0x7A },
+	{  428000000,  0x7B },
+	{  429000000,  0x7D },
+	{  432000000,  0x7F },
+	{  434000000,  0x80 },
+	{  435000000,  0x81 },
+	{  436000000,  0x83 },
+	{  437000000,  0x84 },
+	{  438000000,  0x85 },
+	{  439000000,  0x86 },
+	{  440000000,  0x87 },
+	{  441000000,  0x88 },
+	{  442000000,  0x89 },
+	{  445000000,  0x8A },
+	{  446000000,  0x8B },
+	{  447000000,  0x8C },
+	{  448000000,  0x8E },
+	{  449000000,  0x8F },
+	{  450000000,  0x90 },
+	{  452000000,  0x91 },
+	{  453000000,  0x93 },
+	{  454000000,  0x94 },
+	{  456000000,  0x96 },
+	{  457800000,  0x98 },
+	{  461000000,  0x11 },
+	{  468000000,  0x12 },
+	{  472000000,  0x13 },
+	{  473000000,  0x14 },
+	{  474000000,  0x15 },
+	{  481000000,  0x16 },
+	{  486000000,  0x17 },
+	{  491000000,  0x18 },
+	{  498000000,  0x19 },
+	{  499000000,  0x1A },
+	{  501000000,  0x1B },
+	{  506000000,  0x1C },
+	{  511000000,  0x1D },
+	{  516000000,  0x1E },
+	{  520000000,  0x1F },
+	{  521000000,  0x20 },
+	{  525000000,  0x21 },
+	{  529000000,  0x22 },
+	{  533000000,  0x23 },
+	{  539000000,  0x24 },
+	{  541000000,  0x25 },
+	{  547000000,  0x26 },
+	{  549000000,  0x27 },
+	{  551000000,  0x28 },
+	{  556000000,  0x29 },
+	{  561000000,  0x2A },
+	{  563000000,  0x2B },
+	{  565000000,  0x2C },
+	{  569000000,  0x2D },
+	{  571000000,  0x2E },
+	{  577000000,  0x2F },
+	{  580000000,  0x30 },
+	{  582000000,  0x31 },
+	{  584000000,  0x32 },
+	{  588000000,  0x33 },
+	{  591000000,  0x34 },
+	{  596000000,  0x35 },
+	{  598000000,  0x36 },
+	{  603000000,  0x37 },
+	{  604000000,  0x38 },
+	{  606000000,  0x39 },
+	{  612000000,  0x3A },
+	{  615000000,  0x3B },
+	{  617000000,  0x3C },
+	{  621000000,  0x3D },
+	{  622000000,  0x3E },
+	{  625000000,  0x3F },
+	{  632000000,  0x40 },
+	{  633000000,  0x41 },
+	{  634000000,  0x42 },
+	{  642000000,  0x43 },
+	{  643000000,  0x44 },
+	{  647000000,  0x45 },
+	{  650000000,  0x46 },
+	{  652000000,  0x47 },
+	{  657000000,  0x48 },
+	{  661000000,  0x49 },
+	{  662000000,  0x4A },
+	{  665000000,  0x4B },
+	{  667000000,  0x4C },
+	{  670000000,  0x4D },
+	{  673000000,  0x4E },
+	{  676000000,  0x4F },
+	{  677000000,  0x50 },
+	{  681000000,  0x51 },
+	{  683000000,  0x52 },
+	{  686000000,  0x53 },
+	{  688000000,  0x54 },
+	{  689000000,  0x55 },
+	{  691000000,  0x56 },
+	{  695000000,  0x57 },
+	{  698000000,  0x58 },
+	{  703000000,  0x59 },
+	{  704000000,  0x5A },
+	{  705000000,  0x5B },
+	{  707000000,  0x5C },
+	{  710000000,  0x5D },
+	{  712000000,  0x5E },
+	{  717000000,  0x5F },
+	{  718000000,  0x60 },
+	{  721000000,  0x61 },
+	{  722000000,  0x62 },
+	{  723000000,  0x63 },
+	{  725000000,  0x64 },
+	{  727000000,  0x65 },
+	{  730000000,  0x66 },
+	{  732000000,  0x67 },
+	{  735000000,  0x68 },
+	{  740000000,  0x69 },
+	{  741000000,  0x6A },
+	{  742000000,  0x6B },
+	{  743000000,  0x6C },
+	{  745000000,  0x6D },
+	{  747000000,  0x6E },
+	{  748000000,  0x6F },
+	{  750000000,  0x70 },
+	{  752000000,  0x71 },
+	{  754000000,  0x72 },
+	{  757000000,  0x73 },
+	{  758000000,  0x74 },
+	{  760000000,  0x75 },
+	{  763000000,  0x76 },
+	{  764000000,  0x77 },
+	{  766000000,  0x78 },
+	{  767000000,  0x79 },
+	{  768000000,  0x7A },
+	{  773000000,  0x7B },
+	{  774000000,  0x7C },
+	{  776000000,  0x7D },
+	{  777000000,  0x7E },
+	{  778000000,  0x7F },
+	{  779000000,  0x80 },
+	{  781000000,  0x81 },
+	{  783000000,  0x82 },
+	{  784000000,  0x83 },
+	{  785000000,  0x84 },
+	{  786000000,  0x85 },
+	{  793000000,  0x86 },
+	{  794000000,  0x87 },
+	{  795000000,  0x88 },
+	{  797000000,  0x89 },
+	{  799000000,  0x8A },
+	{  801000000,  0x8B },
+	{  802000000,  0x8C },
+	{  803000000,  0x8D },
+	{  804000000,  0x8E },
+	{  810000000,  0x90 },
+	{  811000000,  0x91 },
+	{  812000000,  0x92 },
+	{  814000000,  0x93 },
+	{  816000000,  0x94 },
+	{  817000000,  0x96 },
+	{  818000000,  0x97 },
+	{  820000000,  0x98 },
+	{  821000000,  0x99 },
+	{  822000000,  0x9A },
+	{  828000000,  0x9B },
+	{  829000000,  0x9D },
+	{  830000000,  0x9F },
+	{  831000000,  0xA0 },
+	{  833000000,  0xA1 },
+	{  835000000,  0xA2 },
+	{  836000000,  0xA3 },
+	{  837000000,  0xA4 },
+	{  838000000,  0xA6 },
+	{  840000000,  0xA8 },
+	{  842000000,  0xA9 },
+	{  845000000,  0xAA },
+	{  846000000,  0xAB },
+	{  847000000,  0xAD },
+	{  848000000,  0xAE },
+	{  852000000,  0xAF },
+	{  853000000,  0xB0 },
+	{  858000000,  0xB1 },
+	{  860000000,  0xB2 },
+	{  861000000,  0xB3 },
+	{  862000000,  0xB4 },
+	{  863000000,  0xB6 },
+	{  864000000,  0xB8 },
+	{  865000000,  0xB9 },
+	{          0,  0x00 },    /* Table End */
+};
+
+
+static struct SMap2  m_KM_Map[] = {
+	{   47900000,  3, 2 },
+	{   61100000,  3, 1 },
+	{  350000000,  3, 0 },
+	{  720000000,  2, 1 },
+	{  865000000,  3, 3 },
+	{          0,  0x00 },    /* Table End */
+};
+
+static struct SMap2 m_Main_PLL_Map[] = {
+	{  33125000, 0x57, 0xF0 },
+	{  35500000, 0x56, 0xE0 },
+	{  38188000, 0x55, 0xD0 },
+	{  41375000, 0x54, 0xC0 },
+	{  45125000, 0x53, 0xB0 },
+	{  49688000, 0x52, 0xA0 },
+	{  55188000, 0x51, 0x90 },
+	{  62125000, 0x50, 0x80 },
+	{  66250000, 0x47, 0x78 },
+	{  71000000, 0x46, 0x70 },
+	{  76375000, 0x45, 0x68 },
+	{  82750000, 0x44, 0x60 },
+	{  90250000, 0x43, 0x58 },
+	{  99375000, 0x42, 0x50 },
+	{ 110375000, 0x41, 0x48 },
+	{ 124250000, 0x40, 0x40 },
+	{ 132500000, 0x37, 0x3C },
+	{ 142000000, 0x36, 0x38 },
+	{ 152750000, 0x35, 0x34 },
+	{ 165500000, 0x34, 0x30 },
+	{ 180500000, 0x33, 0x2C },
+	{ 198750000, 0x32, 0x28 },
+	{ 220750000, 0x31, 0x24 },
+	{ 248500000, 0x30, 0x20 },
+	{ 265000000, 0x27, 0x1E },
+	{ 284000000, 0x26, 0x1C },
+	{ 305500000, 0x25, 0x1A },
+	{ 331000000, 0x24, 0x18 },
+	{ 361000000, 0x23, 0x16 },
+	{ 397500000, 0x22, 0x14 },
+	{ 441500000, 0x21, 0x12 },
+	{ 497000000, 0x20, 0x10 },
+	{ 530000000, 0x17, 0x0F },
+	{ 568000000, 0x16, 0x0E },
+	{ 611000000, 0x15, 0x0D },
+	{ 662000000, 0x14, 0x0C },
+	{ 722000000, 0x13, 0x0B },
+	{ 795000000, 0x12, 0x0A },
+	{ 883000000, 0x11, 0x09 },
+	{ 994000000, 0x10, 0x08 },
+	{         0, 0x00, 0x00 },    /* Table End */
+};
+
+static struct SMap2 m_Cal_PLL_Map[] = {
+	{  33813000, 0xDD, 0xD0 },
+	{  36625000, 0xDC, 0xC0 },
+	{  39938000, 0xDB, 0xB0 },
+	{  43938000, 0xDA, 0xA0 },
+	{  48813000, 0xD9, 0x90 },
+	{  54938000, 0xD8, 0x80 },
+	{  62813000, 0xD3, 0x70 },
+	{  67625000, 0xCD, 0x68 },
+	{  73250000, 0xCC, 0x60 },
+	{  79875000, 0xCB, 0x58 },
+	{  87875000, 0xCA, 0x50 },
+	{  97625000, 0xC9, 0x48 },
+	{ 109875000, 0xC8, 0x40 },
+	{ 125625000, 0xC3, 0x38 },
+	{ 135250000, 0xBD, 0x34 },
+	{ 146500000, 0xBC, 0x30 },
+	{ 159750000, 0xBB, 0x2C },
+	{ 175750000, 0xBA, 0x28 },
+	{ 195250000, 0xB9, 0x24 },
+	{ 219750000, 0xB8, 0x20 },
+	{ 251250000, 0xB3, 0x1C },
+	{ 270500000, 0xAD, 0x1A },
+	{ 293000000, 0xAC, 0x18 },
+	{ 319500000, 0xAB, 0x16 },
+	{ 351500000, 0xAA, 0x14 },
+	{ 390500000, 0xA9, 0x12 },
+	{ 439500000, 0xA8, 0x10 },
+	{ 502500000, 0xA3, 0x0E },
+	{ 541000000, 0x9D, 0x0D },
+	{ 586000000, 0x9C, 0x0C },
+	{ 639000000, 0x9B, 0x0B },
+	{ 703000000, 0x9A, 0x0A },
+	{ 781000000, 0x99, 0x09 },
+	{ 879000000, 0x98, 0x08 },
+	{         0, 0x00, 0x00 },    /* Table End */
+};
+
+static struct SMap  m_GainTaper_Map[] = {
+	{  45400000, 0x1F },
+	{  45800000, 0x1E },
+	{  46200000, 0x1D },
+	{  46700000, 0x1C },
+	{  47100000, 0x1B },
+	{  47500000, 0x1A },
+	{  47900000, 0x19 },
+	{  49600000, 0x17 },
+	{  51200000, 0x16 },
+	{  52900000, 0x15 },
+	{  54500000, 0x14 },
+	{  56200000, 0x13 },
+	{  57800000, 0x12 },
+	{  59500000, 0x11 },
+	{  61100000, 0x10 },
+	{  67600000, 0x0D },
+	{  74200000, 0x0C },
+	{  80700000, 0x0B },
+	{  87200000, 0x0A },
+	{  93800000, 0x09 },
+	{ 100300000, 0x08 },
+	{ 106900000, 0x07 },
+	{ 113400000, 0x06 },
+	{ 119900000, 0x05 },
+	{ 126500000, 0x04 },
+	{ 133000000, 0x03 },
+	{ 139500000, 0x02 },
+	{ 146100000, 0x01 },
+	{ 152600000, 0x00 },
+	{ 154300000, 0x1F },
+	{ 156100000, 0x1E },
+	{ 157800000, 0x1D },
+	{ 159500000, 0x1C },
+	{ 161200000, 0x1B },
+	{ 163000000, 0x1A },
+	{ 164700000, 0x19 },
+	{ 170200000, 0x17 },
+	{ 175800000, 0x16 },
+	{ 181300000, 0x15 },
+	{ 186900000, 0x14 },
+	{ 192400000, 0x13 },
+	{ 198000000, 0x12 },
+	{ 203500000, 0x11 },
+	{ 216200000, 0x14 },
+	{ 228900000, 0x13 },
+	{ 241600000, 0x12 },
+	{ 254400000, 0x11 },
+	{ 267100000, 0x10 },
+	{ 279800000, 0x0F },
+	{ 292500000, 0x0E },
+	{ 305200000, 0x0D },
+	{ 317900000, 0x0C },
+	{ 330700000, 0x0B },
+	{ 343400000, 0x0A },
+	{ 356100000, 0x09 },
+	{ 368800000, 0x08 },
+	{ 381500000, 0x07 },
+	{ 394200000, 0x06 },
+	{ 406900000, 0x05 },
+	{ 419700000, 0x04 },
+	{ 432400000, 0x03 },
+	{ 445100000, 0x02 },
+	{ 457800000, 0x01 },
+	{ 476300000, 0x19 },
+	{ 494800000, 0x18 },
+	{ 513300000, 0x17 },
+	{ 531800000, 0x16 },
+	{ 550300000, 0x15 },
+	{ 568900000, 0x14 },
+	{ 587400000, 0x13 },
+	{ 605900000, 0x12 },
+	{ 624400000, 0x11 },
+	{ 642900000, 0x10 },
+	{ 661400000, 0x0F },
+	{ 679900000, 0x0E },
+	{ 698400000, 0x0D },
+	{ 716900000, 0x0C },
+	{ 735400000, 0x0B },
+	{ 753900000, 0x0A },
+	{ 772500000, 0x09 },
+	{ 791000000, 0x08 },
+	{ 809500000, 0x07 },
+	{ 828000000, 0x06 },
+	{ 846500000, 0x05 },
+	{ 865000000, 0x04 },
+	{         0, 0x00 },    /* Table End */
+};
+
+static struct SMap m_RF_Cal_DC_Over_DT_Map[] = {
+	{  47900000, 0x00 },
+	{  55000000, 0x00 },
+	{  61100000, 0x0A },
+	{  64000000, 0x0A },
+	{  82000000, 0x14 },
+	{  84000000, 0x19 },
+	{ 119000000, 0x1C },
+	{ 124000000, 0x20 },
+	{ 129000000, 0x2A },
+	{ 134000000, 0x32 },
+	{ 139000000, 0x39 },
+	{ 144000000, 0x3E },
+	{ 149000000, 0x3F },
+	{ 152600000, 0x40 },
+	{ 154000000, 0x40 },
+	{ 164700000, 0x41 },
+	{ 203500000, 0x32 },
+	{ 353000000, 0x19 },
+	{ 356000000, 0x1A },
+	{ 359000000, 0x1B },
+	{ 363000000, 0x1C },
+	{ 366000000, 0x1D },
+	{ 369000000, 0x1E },
+	{ 373000000, 0x1F },
+	{ 376000000, 0x20 },
+	{ 379000000, 0x21 },
+	{ 383000000, 0x22 },
+	{ 386000000, 0x23 },
+	{ 389000000, 0x24 },
+	{ 393000000, 0x25 },
+	{ 396000000, 0x26 },
+	{ 399000000, 0x27 },
+	{ 402000000, 0x28 },
+	{ 404000000, 0x29 },
+	{ 407000000, 0x2A },
+	{ 409000000, 0x2B },
+	{ 412000000, 0x2C },
+	{ 414000000, 0x2D },
+	{ 417000000, 0x2E },
+	{ 419000000, 0x2F },
+	{ 422000000, 0x30 },
+	{ 424000000, 0x31 },
+	{ 427000000, 0x32 },
+	{ 429000000, 0x33 },
+	{ 432000000, 0x34 },
+	{ 434000000, 0x35 },
+	{ 437000000, 0x36 },
+	{ 439000000, 0x37 },
+	{ 442000000, 0x38 },
+	{ 444000000, 0x39 },
+	{ 447000000, 0x3A },
+	{ 449000000, 0x3B },
+	{ 457800000, 0x3C },
+	{ 465000000, 0x0F },
+	{ 477000000, 0x12 },
+	{ 483000000, 0x14 },
+	{ 502000000, 0x19 },
+	{ 508000000, 0x1B },
+	{ 519000000, 0x1C },
+	{ 522000000, 0x1D },
+	{ 524000000, 0x1E },
+	{ 534000000, 0x1F },
+	{ 549000000, 0x20 },
+	{ 554000000, 0x22 },
+	{ 584000000, 0x24 },
+	{ 589000000, 0x26 },
+	{ 658000000, 0x27 },
+	{ 664000000, 0x2C },
+	{ 669000000, 0x2D },
+	{ 699000000, 0x2E },
+	{ 704000000, 0x30 },
+	{ 709000000, 0x31 },
+	{ 714000000, 0x32 },
+	{ 724000000, 0x33 },
+	{ 729000000, 0x36 },
+	{ 739000000, 0x38 },
+	{ 744000000, 0x39 },
+	{ 749000000, 0x3B },
+	{ 754000000, 0x3C },
+	{ 759000000, 0x3D },
+	{ 764000000, 0x3E },
+	{ 769000000, 0x3F },
+	{ 774000000, 0x40 },
+	{ 779000000, 0x41 },
+	{ 784000000, 0x43 },
+	{ 789000000, 0x46 },
+	{ 794000000, 0x48 },
+	{ 799000000, 0x4B },
+	{ 804000000, 0x4F },
+	{ 809000000, 0x54 },
+	{ 814000000, 0x59 },
+	{ 819000000, 0x5D },
+	{ 824000000, 0x61 },
+	{ 829000000, 0x68 },
+	{ 834000000, 0x6E },
+	{ 839000000, 0x75 },
+	{ 844000000, 0x7E },
+	{ 849000000, 0x82 },
+	{ 854000000, 0x84 },
+	{ 859000000, 0x8F },
+	{ 865000000, 0x9A },
+	{         0, 0x00 },    /* Table End */
+};
+
+
+static struct SMap  m_IR_Meas_Map[] = {
+	{ 200000000, 0x05 },
+	{ 400000000, 0x06 },
+	{ 865000000, 0x07 },
+	{         0, 0x00 },    /* Table End */
+};
+
+static struct SMap2 m_CID_Target_Map[] = {
+	{  46000000, 0x04, 18 },
+	{  52200000, 0x0A, 15 },
+	{  70100000, 0x01, 40 },
+	{ 136800000, 0x18, 40 },
+	{ 156700000, 0x18, 40 },
+	{ 186250000, 0x0A, 40 },
+	{ 230000000, 0x0A, 40 },
+	{ 345000000, 0x18, 40 },
+	{ 426000000, 0x0E, 40 },
+	{ 489500000, 0x1E, 40 },
+	{ 697500000, 0x32, 40 },
+	{ 842000000, 0x3A, 40 },
+	{         0, 0x00,  0 },    /* Table End */
+};
+
+static struct SRFBandMap  m_RF_Band_Map[7] = {
+	{   47900000,   46000000,           0,          0},
+	{   61100000,   52200000,           0,          0},
+	{  152600000,   70100000,   136800000,          0},
+	{  164700000,  156700000,           0,          0},
+	{  203500000,  186250000,           0,          0},
+	{  457800000,  230000000,   345000000,  426000000},
+	{  865000000,  489500000,   697500000,  842000000},
+};
+
+u8 m_Thermometer_Map_1[16] = {
+	60, 62, 66, 64,
+	74, 72, 68, 70,
+	90, 88, 84, 86,
+	76, 78, 82, 80,
+};
+
+u8 m_Thermometer_Map_2[16] = {
+	92, 94, 98, 96,
+	106, 104, 100, 102,
+	122, 120, 116, 118,
+	108, 110, 114, 112,
+};
diff --git a/drivers/media/dvb/ngene/Kconfig b/drivers/media/dvb/ngene/Kconfig
index cec242b..64c8470 100644
--- a/drivers/media/dvb/ngene/Kconfig
+++ b/drivers/media/dvb/ngene/Kconfig
@@ -5,6 +5,8 @@ config DVB_NGENE
 	select DVB_STV6110x if !DVB_FE_CUSTOMISE
 	select DVB_STV090x if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+	select DVB_DRXK if !DVB_FE_CUSTOMISE
+	select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE
 	---help---
 	  Support for Micronas PCI express cards with nGene bridge.
diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/dvb/ngene/ngene-cards.c
index fcf4be9..0564192 100644
--- a/drivers/media/dvb/ngene/ngene-cards.c
+++ b/drivers/media/dvb/ngene/ngene-cards.c
@@ -40,6 +40,8 @@
 #include "lnbh24.h"
 #include "lgdt330x.h"
 #include "mt2131.h"
+#include "tda18271c2dd.h"
+#include "drxk.h"
 
 
 /****************************************************************************/
@@ -83,6 +85,49 @@ static int tuner_attach_stv6110(struct ngene_channel *chan)
 }
 
 
+static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct ngene_channel *chan = fe->sec_priv;
+	int status;
+
+	if (enable) {
+		down(&chan->dev->pll_mutex);
+		status = chan->gate_ctrl(fe, 1);
+	} else {
+		status = chan->gate_ctrl(fe, 0);
+		up(&chan->dev->pll_mutex);
+	}
+	return status;
+}
+
+static int tuner_attach_tda18271(struct ngene_channel *chan)
+{
+	struct i2c_adapter *i2c;
+	struct dvb_frontend *fe;
+
+	i2c = &chan->dev->channel[0].i2c_adapter;
+	if (chan->fe->ops.i2c_gate_ctrl)
+		chan->fe->ops.i2c_gate_ctrl(chan->fe, 1);
+	fe = dvb_attach(tda18271c2dd_attach, chan->fe, i2c, 0x60);
+	if (chan->fe->ops.i2c_gate_ctrl)
+		chan->fe->ops.i2c_gate_ctrl(chan->fe, 0);
+	if (!fe) {
+		printk(KERN_ERR "No TDA18271 found!\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int tuner_attach_probe(struct ngene_channel *chan)
+{
+	if (chan->demod_type == 0)
+		return tuner_attach_stv6110(chan);
+	if (chan->demod_type == 1)
+		return tuner_attach_tda18271(chan);
+	return -EINVAL;
+}
+
 static int demod_attach_stv0900(struct ngene_channel *chan)
 {
 	struct i2c_adapter *i2c;
@@ -130,6 +175,60 @@ static void cineS2_tuner_i2c_lock(struct dvb_frontend *fe, int lock)
 		up(&chan->dev->pll_mutex);
 }
 
+static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val)
+{
+	struct i2c_msg msgs[1] = {{.addr = adr,  .flags = I2C_M_RD,
+				   .buf  = val,  .len   = 1 } };
+	return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
+}
+
+static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr,
+			  u16 reg, u8 *val)
+{
+	u8 msg[2] = {reg>>8, reg&0xff};
+	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
+				   .buf  = msg, .len   = 2},
+				  {.addr = adr, .flags = I2C_M_RD,
+				   .buf  = val, .len   = 1} };
+	return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
+}
+
+static int port_has_stv0900(struct i2c_adapter *i2c, int port)
+{
+	u8 val;
+	if (i2c_read_reg16(i2c, 0x68+port/2, 0xf100, &val) < 0)
+		return 0;
+	return 1;
+}
+
+static int port_has_drxk(struct i2c_adapter *i2c, int port)
+{
+	u8 val;
+
+	if (i2c_read(i2c, 0x29+port, &val) < 0)
+		return 0;
+	return 1;
+}
+
+static int demod_attach_drxk(struct ngene_channel *chan,
+			     struct i2c_adapter *i2c)
+{
+	struct drxk_config config;
+
+	memset(&config, 0, sizeof(config));
+	config.adr = 0x29 + (chan->number ^ 2);
+
+	chan->fe = dvb_attach(drxk_attach, &config, i2c, &chan->fe2);
+	if (!chan->fe) {
+		printk(KERN_ERR "No DRXK found!\n");
+		return -ENODEV;
+	}
+	chan->fe->sec_priv = chan;
+	chan->gate_ctrl = chan->fe->ops.i2c_gate_ctrl;
+	chan->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+	return 0;
+}
+
 static int cineS2_probe(struct ngene_channel *chan)
 {
 	struct i2c_adapter *i2c;
@@ -144,43 +243,42 @@ static int cineS2_probe(struct ngene_channel *chan)
 	else
 		i2c = &chan->dev->channel[1].i2c_adapter;
 
-	fe_conf = chan->dev->card_info->fe_config[chan->number];
-	i2c_msg.addr = fe_conf->address;
-
-	/* probe demod */
-	i2c_msg.len = 2;
-	buf[0] = 0xf1;
-	buf[1] = 0x00;
-	rc = i2c_transfer(i2c, &i2c_msg, 1);
-	if (rc != 1)
-		return -ENODEV;
-
-	/* demod found, attach it */
-	rc = demod_attach_stv0900(chan);
-	if (rc < 0 || chan->number < 2)
-		return rc;
-
-	/* demod #2: reprogram outputs DPN1 & DPN2 */
-	i2c_msg.len = 3;
-	buf[0] = 0xf1;
-	switch (chan->number) {
-	case 2:
-		buf[1] = 0x5c;
-		buf[2] = 0xc2;
-		break;
-	case 3:
-		buf[1] = 0x61;
-		buf[2] = 0xcc;
-		break;
-	default:
+	if (port_has_stv0900(i2c, chan->number)) {
+		chan->demod_type = 0;
+		fe_conf = chan->dev->card_info->fe_config[chan->number];
+		/* demod found, attach it */
+		rc = demod_attach_stv0900(chan);
+		if (rc < 0 || chan->number < 2)
+			return rc;
+
+		/* demod #2: reprogram outputs DPN1 & DPN2 */
+		i2c_msg.addr = fe_conf->address;
+		i2c_msg.len = 3;
+		buf[0] = 0xf1;
+		switch (chan->number) {
+		case 2:
+			buf[1] = 0x5c;
+			buf[2] = 0xc2;
+			break;
+		case 3:
+			buf[1] = 0x61;
+			buf[2] = 0xcc;
+			break;
+		default:
+			return -ENODEV;
+		}
+		rc = i2c_transfer(i2c, &i2c_msg, 1);
+		if (rc != 1) {
+			printk(KERN_ERR DEVICE_NAME ": could not setup DPNx\n");
+			return -EIO;
+		}
+	} else if (port_has_drxk(i2c, chan->number^2)) {
+		chan->demod_type = 1;
+		demod_attach_drxk(chan, i2c);
+	} else {
+		printk(KERN_ERR "No demod found on chan %d\n", chan->number);
 		return -ENODEV;
 	}
-	rc = i2c_transfer(i2c, &i2c_msg, 1);
-	if (rc != 1) {
-		printk(KERN_ERR DEVICE_NAME ": could not setup DPNx\n");
-		return -EIO;
-	}
-
 	return 0;
 }
 
@@ -306,7 +404,7 @@ static struct ngene_info ngene_info_satixS2v2 = {
 	.io_type	= {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
 			   NGENE_IO_TSOUT},
 	.demod_attach	= {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe},
-	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110},
+	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe},
 	.fe_config	= {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
 	.tuner_config	= {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
 	.lnb		= {0x0a, 0x08, 0x0b, 0x09},
@@ -321,7 +419,7 @@ static struct ngene_info ngene_info_cineS2v5 = {
 	.io_type	= {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
 			   NGENE_IO_TSOUT},
 	.demod_attach	= {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe},
-	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110},
+	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe},
 	.fe_config	= {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
 	.tuner_config	= {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
 	.lnb		= {0x0a, 0x08, 0x0b, 0x09},
@@ -331,13 +429,13 @@ static struct ngene_info ngene_info_cineS2v5 = {
 };
 
 
-static struct ngene_info ngene_info_duoFlexS2 = {
+static struct ngene_info ngene_info_duoFlex = {
 	.type           = NGENE_SIDEWINDER,
-	.name           = "Digital Devices DuoFlex S2 miniPCIe",
+	.name           = "Digital Devices DuoFlex PCIe or miniPCIe",
 	.io_type        = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
 			   NGENE_IO_TSOUT},
 	.demod_attach   = {cineS2_probe, cineS2_probe, cineS2_probe, cineS2_probe},
-	.tuner_attach   = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110},
+	.tuner_attach   = {tuner_attach_probe, tuner_attach_probe, tuner_attach_probe, tuner_attach_probe},
 	.fe_config      = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
 	.tuner_config   = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
 	.lnb            = {0x0a, 0x08, 0x0b, 0x09},
@@ -385,8 +483,8 @@ static const struct pci_device_id ngene_id_tbl[] __devinitdata = {
 	NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2),
 	NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2),
 	NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5),
-	NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlexS2),
-	NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlexS2),
+	NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlex),
+	NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlex),
 	NGENE_ID(0x1461, 0x062e, ngene_info_m780),
 	{0}
 };
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index 6927c72..f129a93 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -41,7 +41,7 @@
 
 #include "ngene.h"
 
-static int one_adapter = 1;
+static int one_adapter;
 module_param(one_adapter, int, 0444);
 MODULE_PARM_DESC(one_adapter, "Use only one adapter.");
 
@@ -461,7 +461,7 @@ static u8 TSFeatureDecoderSetup[8 * 5] = {
 	0x42, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,
 	0x40, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,	/* DRXH */
 	0x71, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,	/* DRXHser */
-	0x72, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,	/* S2ser */
+	0x72, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,	/* S2ser */
 	0x40, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* LGDT3303 */
 };
 
@@ -507,7 +507,7 @@ void FillTSBuffer(void *Buffer, int Length, u32 Flags)
 {
 	u32 *ptr = Buffer;
 
-	memset(Buffer, 0xff, Length);
+	memset(Buffer, TS_FILLER, Length);
 	while (Length > 0) {
 		if (Flags & DF_SWAP32)
 			*ptr = 0x471FFF10;
@@ -1443,6 +1443,9 @@ static void release_channel(struct ngene_channel *chan)
 		chan->ci_dev = NULL;
 	}
 
+	if (chan->fe2)
+		dvb_unregister_frontend(chan->fe2);
+
 	if (chan->fe) {
 		dvb_unregister_frontend(chan->fe);
 		dvb_frontend_detach(chan->fe);
@@ -1534,6 +1537,14 @@ static int init_channel(struct ngene_channel *chan)
 			goto err;
 		chan->has_demux = true;
 	}
+	if (chan->fe2) {
+		if (dvb_register_frontend(adapter, chan->fe2) < 0)
+			goto err;
+		chan->fe2->tuner_priv = chan->fe->tuner_priv;
+		memcpy(&chan->fe2->ops.tuner_ops,
+		       &chan->fe->ops.tuner_ops,
+		       sizeof(struct dvb_tuner_ops));
+	}
 
 	if (chan->has_demux) {
 		ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux",
@@ -1571,11 +1582,18 @@ static int init_channels(struct ngene *dev)
 	return 0;
 }
 
+static struct cxd2099_cfg cxd_cfg = {
+	.bitrate = 62000,
+	.adr = 0x40,
+	.polarity = 0,
+	.clock_mode = 0,
+};
+
 static void cxd_attach(struct ngene *dev)
 {
 	struct ngene_ci *ci = &dev->ci;
 
-	ci->en = cxd2099_attach(0x40, dev, &dev->channel[0].i2c_adapter);
+	ci->en = cxd2099_attach(&cxd_cfg, dev, &dev->channel[0].i2c_adapter);
 	ci->dev = dev;
 	return;
 }
diff --git a/drivers/media/dvb/ngene/ngene-dvb.c b/drivers/media/dvb/ngene/ngene-dvb.c
index 0b49432..fcb16a6 100644
--- a/drivers/media/dvb/ngene/ngene-dvb.c
+++ b/drivers/media/dvb/ngene/ngene-dvb.c
@@ -118,6 +118,16 @@ static void swap_buffer(u32 *p, u32 len)
 	}
 }
 
+/* start of filler packet */
+static u8 fill_ts[] = { 0x47, 0x1f, 0xff, 0x10, TS_FILLER };
+
+/* #define DEBUG_CI_XFER */
+#ifdef DEBUG_CI_XFER
+static u32 ok;
+static u32 overflow;
+static u32 stripped;
+#endif
+
 void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags)
 {
 	struct ngene_channel *chan = priv;
@@ -126,21 +136,41 @@ void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags)
 
 	if (flags & DF_SWAP32)
 		swap_buffer(buf, len);
+
 	if (dev->ci.en && chan->number == 2) {
-		if (dvb_ringbuffer_free(&dev->tsin_rbuf) > len) {
-			dvb_ringbuffer_write(&dev->tsin_rbuf, buf, len);
-			wake_up_interruptible(&dev->tsin_rbuf.queue);
+		while (len >= 188) {
+			if (memcmp(buf, fill_ts, sizeof fill_ts) != 0) {
+				if (dvb_ringbuffer_free(&dev->tsin_rbuf) >= 188) {
+					dvb_ringbuffer_write(&dev->tsin_rbuf, buf, 188);
+					wake_up(&dev->tsin_rbuf.queue);
+#ifdef DEBUG_CI_XFER
+					ok++;
+#endif
+				}
+#ifdef DEBUG_CI_XFER
+				else
+					overflow++;
+#endif
+			}
+#ifdef DEBUG_CI_XFER
+			else
+				stripped++;
+
+			if (ok % 100 == 0 && overflow)
+				printk(KERN_WARNING "%s: ok %u overflow %u dropped %u\n", __func__, ok, overflow, stripped);
+#endif
+			buf += 188;
+			len -= 188;
 		}
-		return 0;
+		return NULL;
 	}
-	if (chan->users > 0) {
+
+	if (chan->users > 0)
 		dvb_dmx_swfilter(&chan->demux, buf, len);
-	}
+
 	return NULL;
 }
 
-u8 fill_ts[188] = { 0x47, 0x1f, 0xff, 0x10 };
-
 void *tsout_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags)
 {
 	struct ngene_channel *chan = priv;
diff --git a/drivers/media/dvb/ngene/ngene.h b/drivers/media/dvb/ngene/ngene.h
index 40fce9e..5443dc0 100644
--- a/drivers/media/dvb/ngene/ngene.h
+++ b/drivers/media/dvb/ngene/ngene.h
@@ -641,8 +641,11 @@ struct ngene_channel {
 	int                   mode;
 	bool                  has_adapter;
 	bool                  has_demux;
+	int                   demod_type;
+	int (*gate_ctrl)(struct dvb_frontend *, int);
 
 	struct dvb_frontend  *fe;
+	struct dvb_frontend  *fe2;
 	struct dmxdev         dmxdev;
 	struct dvb_demux      demux;
 	struct dvb_net        dvbnet;
@@ -786,6 +789,8 @@ struct ngene {
 	u8                    uart_rbuf[UART_RBUF_LEN];
 	int                   uart_rp, uart_wp;
 
+#define TS_FILLER  0x6f
+
 	u8                   *tsout_buf;
 #define TSOUT_BUF_SIZE (512*188*8)
 	struct dvb_ringbuffer tsout_rbuf;
@@ -852,7 +857,7 @@ struct ngene_info {
 };
 
 #ifdef NGENE_V4L
-struct ngene_format{
+struct ngene_format {
 	char *name;
 	int   fourcc;          /* video4linux 2      */
 	int   btformat;        /* BT848_COLOR_FMT_*  */
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 78765ed..7331e84 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1147,7 +1147,7 @@ static int smscore_validate_client(struct smscore_device_t *coredev,
 
 	if (!client) {
 		sms_err("bad parameter.");
-		return -EFAULT;
+		return -EINVAL;
 	}
 	registered_client = smscore_find_client(coredev, data_type, id);
 	if (registered_client == client)
diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h
index 8ecadec..c592ae0 100644
--- a/drivers/media/dvb/siano/smscoreapi.h
+++ b/drivers/media/dvb/siano/smscoreapi.h
@@ -22,7 +22,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef __SMS_CORE_API_H__
 #define __SMS_CORE_API_H__
 
-#include <linux/version.h>
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/mm.h>
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 3d8cc42..25e58cb 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -102,10 +102,7 @@
 /*
  * Version Information
  */
-#include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
-
-#define DRIVER_VERSION "v0.46"
-#define RADIO_VERSION KERNEL_VERSION(0, 4, 6)
+#define DRIVER_VERSION "0.4.7"
 
 #define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>"
 #define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver"
@@ -335,7 +332,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "dsbr100", sizeof(v->driver));
 	strlcpy(v->card, "D-Link R-100 USB FM Radio", sizeof(v->card));
 	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
@@ -647,3 +643,4 @@ module_exit (dsbr100_exit);
 MODULE_AUTHOR( DRIVER_AUTHOR );
 MODULE_DESCRIPTION( DRIVER_DESC );
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index 4ce10db..1c3f844 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -33,7 +33,6 @@
 #include <linux/ioport.h>	/* request_region		*/
 #include <linux/delay.h>	/* msleep			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
-#include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -41,6 +40,7 @@
 MODULE_AUTHOR("M.Kirkwood");
 MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 #ifndef CONFIG_RADIO_RTRACK_PORT
 #define CONFIG_RADIO_RTRACK_PORT -1
@@ -53,8 +53,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the RadioTrack card (0x20f or 0x30f)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct rtrack
 {
 	struct v4l2_device v4l2_dev;
@@ -223,7 +221,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-aimslab", sizeof(v->driver));
 	strlcpy(v->card, "RadioTrack", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
index dd8a6ab..eed7b08 100644
--- a/drivers/media/radio/radio-aztech.c
+++ b/drivers/media/radio/radio-aztech.c
@@ -30,7 +30,6 @@
 #include <linux/ioport.h>	/* request_region		*/
 #include <linux/delay.h>	/* udelay			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -38,6 +37,7 @@
 MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
 MODULE_DESCRIPTION("A driver for the Aztech radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
 
@@ -53,8 +53,6 @@ module_param(io, int, 0);
 module_param(radio_nr, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the Aztech card (0x350 or 0x358)");
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct aztech
 {
 	struct v4l2_device v4l2_dev;
@@ -188,7 +186,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-aztech", sizeof(v->driver));
 	strlcpy(v->card, "Aztech Radio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index bc9ad08..16a089f 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -30,7 +30,6 @@
  *		Changed API to V4L2
  */
 
-#include <linux/version.h>
 #include <linux/module.h>	/* Modules 			*/
 #include <linux/init.h>		/* Initdata			*/
 #include <linux/ioport.h>	/* request_region		*/
@@ -46,6 +45,7 @@
 MODULE_AUTHOR("Fred Gleason, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
 MODULE_DESCRIPTION("A driver for the ADS Cadet AM/FM/RDS radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.3.4");
 
 static int io = -1;		/* default to isapnp activation */
 static int radio_nr = -1;
@@ -54,8 +54,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of Cadet card (0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e)");
 module_param(radio_nr, int, 0);
 
-#define CADET_VERSION KERNEL_VERSION(0, 3, 3)
-
 #define RDS_BUFFER 256
 #define RDS_RX_FLAG 1
 #define MBS_RX_FLAG 2
@@ -361,7 +359,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "ADS Cadet", sizeof(v->driver));
 	strlcpy(v->card, "ADS Cadet", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = CADET_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO |
 			  V4L2_CAP_READWRITE | V4L2_CAP_RDS_CAPTURE;
 	return 0;
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index 2599364..edadc84 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -21,21 +21,19 @@
 #include <linux/ioport.h>	/* request_region		*/
 #include <linux/delay.h>	/* udelay			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
-#include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
 #include <linux/mutex.h>
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 3)
-
 /*
  * Module info.
  */
 
-MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
+MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
 MODULE_DESCRIPTION("A driver for the GemTek Radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.4");
 
 /*
  * Module params.
@@ -387,7 +385,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "radio-gemtek", sizeof(v->driver));
 	strlcpy(v->card, "GemTek", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index e83e840..f872a54 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -40,15 +40,18 @@
 #include <linux/mutex.h>
 #include <linux/pci.h>
 #include <linux/videodev2.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 
+#define DRIVER_VERSION	"0.7.8"
+
+
 MODULE_AUTHOR("Dimitromanolakis Apostolos, apdim@grecian.net");
 MODULE_DESCRIPTION("Radio driver for the Guillemot Maxi Radio FM2000 radio.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
 
 static int radio_nr = -1;
 module_param(radio_nr, int, 0);
@@ -58,10 +61,6 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "activates debug info");
 
-#define DRIVER_VERSION	"0.77"
-
-#define RADIO_VERSION KERNEL_VERSION(0, 7, 7)
-
 #define dprintk(dev, num, fmt, arg...) \
 	v4l2_dbg(num, debug, &dev->v4l2_dev, fmt, ## arg)
 
@@ -195,7 +194,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-maxiradio", sizeof(v->driver));
 	strlcpy(v->card, "Maxi Radio FM2000 radio", sizeof(v->card));
 	snprintf(v->bus_info, sizeof(v->bus_info), "PCI:%s", pci_name(dev->pdev));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index b3a635b..1742bd8 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -63,18 +63,17 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
-#include <linux/version.h>	/* for KERNEL_VERSION MACRO */
 #include <linux/mutex.h>
 
 /* driver and module definitions */
 #define DRIVER_AUTHOR "Alexey Klimov <klimov.linux@gmail.com>"
 #define DRIVER_DESC "AverMedia MR 800 USB FM radio driver"
-#define DRIVER_VERSION "0.11"
-#define RADIO_VERSION KERNEL_VERSION(0, 1, 1)
+#define DRIVER_VERSION "0.1.2"
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
 
 #define USB_AMRADIO_VENDOR 0x07ca
 #define USB_AMRADIO_PRODUCT 0xb800
@@ -301,7 +300,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "radio-mr800", sizeof(v->driver));
 	strlcpy(v->card, "AverMedia MR 800 USB FM Radio", sizeof(v->card));
 	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c
index 8d6ea59..3628be6 100644
--- a/drivers/media/radio/radio-rtrack2.c
+++ b/drivers/media/radio/radio-rtrack2.c
@@ -15,7 +15,6 @@
 #include <linux/delay.h>	/* udelay			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <linux/mutex.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -23,6 +22,7 @@
 MODULE_AUTHOR("Ben Pfaff");
 MODULE_DESCRIPTION("A driver for the RadioTrack II radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 #ifndef CONFIG_RADIO_RTRACK2_PORT
 #define CONFIG_RADIO_RTRACK2_PORT -1
@@ -35,8 +35,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the RadioTrack card (0x20c or 0x30c)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct rtrack2
 {
 	struct v4l2_device v4l2_dev;
@@ -121,7 +119,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "radio-rtrack2", sizeof(v->driver));
 	strlcpy(v->card, "RadioTrack II", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index b5a5f89..22c5743 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -16,7 +16,6 @@
  * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
  */
 
-#include <linux/version.h>
 #include <linux/kernel.h>	/* __setup			*/
 #include <linux/module.h>	/* Modules 			*/
 #include <linux/init.h>		/* Initdata			*/
@@ -32,6 +31,7 @@
 MODULE_AUTHOR("Petr Vandrovec, vandrove@vc.cvut.cz and M. Kirkwood");
 MODULE_DESCRIPTION("A driver for the SF16-FMI and SF16-FMP radio.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 static int io = -1;
 static int radio_nr = -1;
@@ -40,8 +40,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the SF16-FMI or SF16-FMP card (0x284 or 0x384)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct fmi
 {
 	struct v4l2_device v4l2_dev;
@@ -134,7 +132,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-sf16fmi", sizeof(v->driver));
 	strlcpy(v->card, "SF16-FMx radio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index 87bad76..2dd4859 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -1,441 +1,209 @@
-/* SF16FMR2 radio driver for Linux radio support
- * heavily based on fmi driver...
- * (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com
+/* SF16-FMR2 radio driver for Linux
+ * Copyright (c) 2011 Ondrej Zary
  *
- * Notes on the hardware
- *
- *  Frequency control is done digitally -- ie out(port,encodefreq(95.8));
- *  No volume control - only mute/unmute - you have to use line volume
- *
- *  For read stereo/mono you must wait 0.1 sec after set frequency and
- *  card unmuted so I set frequency on unmute
- *  Signal handling seem to work only on autoscanning (not implemented)
- *
- *  Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
+ * Original driver was (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com
+ * but almost nothing remained here after conversion to generic TEA575x
+ * implementation
  */
 
+#include <linux/delay.h>
 #include <linux/module.h>	/* Modules 			*/
 #include <linux/init.h>		/* Initdata			*/
 #include <linux/ioport.h>	/* request_region		*/
-#include <linux/delay.h>	/* udelay			*/
-#include <linux/videodev2.h>	/* kernel radio structs		*/
-#include <linux/mutex.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>		/* outb, outb_p			*/
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
+#include <sound/tea575x-tuner.h>
 
-MODULE_AUTHOR("Ziglio Frediano, freddy77@angelfire.com");
-MODULE_DESCRIPTION("A driver for the SF16FMR2 radio.");
+MODULE_AUTHOR("Ondrej Zary");
+MODULE_DESCRIPTION("MediaForte SF16-FMR2 FM radio card driver");
 MODULE_LICENSE("GPL");
 
-static int io = 0x384;
-static int radio_nr = -1;
-
-module_param(io, int, 0);
-MODULE_PARM_DESC(io, "I/O address of the SF16FMR2 card (should be 0x384, if do not work try 0x284)");
-module_param(radio_nr, int, 0);
-
-#define RADIO_VERSION KERNEL_VERSION(0,0,2)
-
-#define AUD_VOL_INDEX 1
-
-#undef DEBUG
-//#define DEBUG 1
-
-#ifdef DEBUG
-# define  debug_print(s) printk s
-#else
-# define  debug_print(s)
-#endif
-
-/* this should be static vars for module size */
-struct fmr2
-{
-	struct v4l2_device v4l2_dev;
-	struct video_device vdev;
-	struct mutex lock;
+struct fmr2 {
 	int io;
-	int curvol; /* 0-15 */
-	int mute;
-	int stereo; /* card is producing stereo audio */
-	unsigned long curfreq; /* freq in kHz */
-	int card_type;
+	struct snd_tea575x tea;
+	struct v4l2_ctrl *volume;
+	struct v4l2_ctrl *balance;
 };
 
+/* the port is hardwired so no need to support multiple cards */
+#define FMR2_PORT	0x384
 static struct fmr2 fmr2_card;
 
-/* hw precision is 12.5 kHz
- * It is only useful to give freq in interval of 200 (=0.0125Mhz),
- * other bits will be truncated
- */
-#define RSF16_ENCODE(x)	((x) / 200 + 856)
-#define RSF16_MINFREQ (87 * 16000)
-#define RSF16_MAXFREQ (108 * 16000)
-
-static inline void wait(int n, int io)
-{
-	for (; n; --n)
-		inb(io);
-}
-
-static void outbits(int bits, unsigned int data, int nWait, int io)
-{
-	int bit;
-
-	for (; --bits >= 0;) {
-		bit = (data >> bits) & 1;
-		outb(bit, io);
-		wait(nWait, io);
-		outb(bit | 2, io);
-		wait(nWait, io);
-		outb(bit, io);
-		wait(nWait, io);
-	}
-}
-
-static inline void fmr2_mute(int io)
-{
-	outb(0x00, io);
-	wait(4, io);
-}
-
-static inline void fmr2_unmute(int io)
-{
-	outb(0x04, io);
-	wait(4, io);
-}
-
-static inline int fmr2_stereo_mode(int io)
-{
-	int n = inb(io);
-
-	outb(6, io);
-	inb(io);
-	n = ((n >> 3) & 1) ^ 1;
-	debug_print((KERN_DEBUG "stereo: %d\n", n));
-	return n;
-}
-
-static int fmr2_product_info(struct fmr2 *dev)
-{
-	int n = inb(dev->io);
-
-	n &= 0xC1;
-	if (n == 0) {
-		/* this should support volume set */
-		dev->card_type = 12;
-		return 0;
-	}
-	/* not volume (mine is 11) */
-	dev->card_type = (n == 128) ? 11 : 0;
-	return n;
-}
+/* TEA575x tuner pins */
+#define STR_DATA	(1 << 0)
+#define STR_CLK		(1 << 1)
+#define STR_WREN	(1 << 2)
+#define STR_MOST	(1 << 3)
+/* PT2254A/TC9154A volume control pins */
+#define PT_ST		(1 << 4)
+#define PT_CK		(1 << 5)
+#define PT_DATA		(1 << 6)
+/* volume control presence pin */
+#define FMR2_HASVOL	(1 << 7)
 
-static inline int fmr2_getsigstr(struct fmr2 *dev)
+static void fmr2_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
 {
-	/* !!! works only if scanning freq */
-	int res = 0xffff;
-
-	outb(5, dev->io);
-	wait(4, dev->io);
-	if (!(inb(dev->io) & 1))
-		res = 0;
-	debug_print((KERN_DEBUG "signal: %d\n", res));
-	return res;
-}
-
-/* set frequency and unmute card */
-static int fmr2_setfreq(struct fmr2 *dev)
-{
-	unsigned long freq = dev->curfreq;
-
-	fmr2_mute(dev->io);
-
-	/* 0x42 for mono output
-	 * 0x102 forward scanning
-	 * 0x182 scansione avanti
-	 */
-	outbits(9, 0x2, 3, dev->io);
-	outbits(16, RSF16_ENCODE(freq), 2, dev->io);
-
-	fmr2_unmute(dev->io);
+	struct fmr2 *fmr2 = tea->private_data;
+	u8 bits = 0;
 
-	/* wait 0.11 sec */
-	msleep(110);
+	bits |= (pins & TEA575X_DATA) ? STR_DATA : 0;
+	bits |= (pins & TEA575X_CLK)  ? STR_CLK  : 0;
+	/* WRITE_ENABLE is inverted, DATA must be high during read */
+	bits |= (pins & TEA575X_WREN) ? 0 : STR_WREN | STR_DATA;
 
-	/* NOTE if mute this stop radio
-	   you must set freq on unmute */
-	dev->stereo = fmr2_stereo_mode(dev->io);
-	return 0;
-}
-
-/* !!! not tested, in my card this doesn't work !!! */
-static int fmr2_setvolume(struct fmr2 *dev)
-{
-	int vol[16] = { 0x021, 0x084, 0x090, 0x104,
-			0x110, 0x204, 0x210, 0x402,
-			0x404, 0x408, 0x410, 0x801,
-			0x802, 0x804, 0x808, 0x810 };
-	int i, a;
-	int n = vol[dev->curvol & 0x0f];
-
-	if (dev->card_type != 11)
-		return 1;
-
-	for (i = 12; --i >= 0; ) {
-		a = ((n >> i) & 1) << 6; /* if (a==0) a = 0; else a = 0x40; */
-		outb(a | 4, dev->io);
-		wait(4, dev->io);
-		outb(a | 0x24, dev->io);
-		wait(4, dev->io);
-		outb(a | 4, dev->io);
-		wait(4, dev->io);
-	}
-	for (i = 6; --i >= 0; ) {
-		a = ((0x18 >> i) & 1) << 6;
-		outb(a | 4, dev->io);
-		wait(4, dev->io);
-		outb(a | 0x24, dev->io);
-		wait(4, dev->io);
-		outb(a | 4, dev->io);
-		wait(4, dev->io);
-	}
-	wait(4, dev->io);
-	outb(0x14, dev->io);
-	return 0;
+	outb(bits, fmr2->io);
 }
 
-static int vidioc_querycap(struct file *file, void  *priv,
-					struct v4l2_capability *v)
+static u8 fmr2_tea575x_get_pins(struct snd_tea575x *tea)
 {
-	strlcpy(v->driver, "radio-sf16fmr2", sizeof(v->driver));
-	strlcpy(v->card, "SF16-FMR2 radio", sizeof(v->card));
-	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
-	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
-	return 0;
-}
-
-static int vidioc_g_tuner(struct file *file, void *priv,
-					struct v4l2_tuner *v)
-{
-	struct fmr2 *fmr2 = video_drvdata(file);
-
-	if (v->index > 0)
-		return -EINVAL;
+	struct fmr2 *fmr2 = tea->private_data;
+	u8 bits = inb(fmr2->io);
 
-	strlcpy(v->name, "FM", sizeof(v->name));
-	v->type = V4L2_TUNER_RADIO;
-
-	v->rangelow = RSF16_MINFREQ;
-	v->rangehigh = RSF16_MAXFREQ;
-	v->rxsubchans = fmr2->stereo ? V4L2_TUNER_SUB_STEREO :
-					V4L2_TUNER_SUB_MONO;
-	v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW;
-	v->audmode = V4L2_TUNER_MODE_STEREO;
-	mutex_lock(&fmr2->lock);
-	v->signal = fmr2_getsigstr(fmr2);
-	mutex_unlock(&fmr2->lock);
-	return 0;
+	return  (bits & STR_DATA) ? TEA575X_DATA : 0 |
+		(bits & STR_MOST) ? TEA575X_MOST : 0;
 }
 
-static int vidioc_s_tuner(struct file *file, void *priv,
-					struct v4l2_tuner *v)
+static void fmr2_tea575x_set_direction(struct snd_tea575x *tea, bool output)
 {
-	return v->index ? -EINVAL : 0;
 }
 
-static int vidioc_s_frequency(struct file *file, void *priv,
-					struct v4l2_frequency *f)
-{
-	struct fmr2 *fmr2 = video_drvdata(file);
+static struct snd_tea575x_ops fmr2_tea_ops = {
+	.set_pins = fmr2_tea575x_set_pins,
+	.get_pins = fmr2_tea575x_get_pins,
+	.set_direction = fmr2_tea575x_set_direction,
+};
 
-	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
-		return -EINVAL;
-	if (f->frequency < RSF16_MINFREQ ||
-			f->frequency > RSF16_MAXFREQ)
-		return -EINVAL;
-	/* rounding in steps of 200 to match the freq
-	   that will be used */
-	fmr2->curfreq = (f->frequency / 200) * 200;
-
-	/* set card freq (if not muted) */
-	if (fmr2->curvol && !fmr2->mute) {
-		mutex_lock(&fmr2->lock);
-		fmr2_setfreq(fmr2);
-		mutex_unlock(&fmr2->lock);
+/* TC9154A/PT2254A volume control */
+
+/* 18-bit shift register bit definitions */
+#define TC9154A_ATT_MAJ_0DB	(1 << 0)
+#define TC9154A_ATT_MAJ_10DB	(1 << 1)
+#define TC9154A_ATT_MAJ_20DB	(1 << 2)
+#define TC9154A_ATT_MAJ_30DB	(1 << 3)
+#define TC9154A_ATT_MAJ_40DB	(1 << 4)
+#define TC9154A_ATT_MAJ_50DB	(1 << 5)
+#define TC9154A_ATT_MAJ_60DB	(1 << 6)
+
+#define TC9154A_ATT_MIN_0DB	(1 << 7)
+#define TC9154A_ATT_MIN_2DB	(1 << 8)
+#define TC9154A_ATT_MIN_4DB	(1 << 9)
+#define TC9154A_ATT_MIN_6DB	(1 << 10)
+#define TC9154A_ATT_MIN_8DB	(1 << 11)
+/* bit 12 is ignored */
+#define TC9154A_CHANNEL_LEFT	(1 << 13)
+#define TC9154A_CHANNEL_RIGHT	(1 << 14)
+/* bits 15, 16, 17 must be 0 */
+
+#define	TC9154A_ATT_MAJ(x)	(1 << x)
+#define TC9154A_ATT_MIN(x)	(1 << (7 + x))
+
+static void tc9154a_set_pins(struct fmr2 *fmr2, u8 pins)
+{
+	if (!fmr2->tea.mute)
+		pins |= STR_WREN;
+
+	outb(pins, fmr2->io);
+}
+
+static void tc9154a_set_attenuation(struct fmr2 *fmr2, int att, u32 channel)
+{
+	int i;
+	u32 reg;
+	u8 bit;
+
+	reg = TC9154A_ATT_MAJ(att / 10) | TC9154A_ATT_MIN((att % 10) / 2);
+	reg |= channel;
+	/* write 18-bit shift register, LSB first */
+	for (i = 0; i < 18; i++) {
+		bit = reg & (1 << i) ? PT_DATA : 0;
+		tc9154a_set_pins(fmr2, bit);
+		udelay(5);
+		tc9154a_set_pins(fmr2, bit | PT_CK);
+		udelay(5);
+		tc9154a_set_pins(fmr2, bit);
 	}
-	return 0;
-}
-
-static int vidioc_g_frequency(struct file *file, void *priv,
-					struct v4l2_frequency *f)
-{
-	struct fmr2 *fmr2 = video_drvdata(file);
-
-	if (f->tuner != 0)
-		return -EINVAL;
-	f->type = V4L2_TUNER_RADIO;
-	f->frequency = fmr2->curfreq;
-	return 0;
-}
 
-static int vidioc_queryctrl(struct file *file, void *priv,
-					struct v4l2_queryctrl *qc)
-{
-	struct fmr2 *fmr2 = video_drvdata(file);
-
-	switch (qc->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
-	case V4L2_CID_AUDIO_VOLUME:
-		/* Only card_type == 11 implements volume */
-		if (fmr2->card_type == 11)
-			return v4l2_ctrl_query_fill(qc, 0, 15, 1, 0);
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
-	}
-	return -EINVAL;
+	/* latch register data */
+	udelay(5);
+	tc9154a_set_pins(fmr2, PT_ST);
+	udelay(5);
+	tc9154a_set_pins(fmr2, 0);
 }
 
-static int vidioc_g_ctrl(struct file *file, void *priv,
-					struct v4l2_control *ctrl)
+static int fmr2_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct fmr2 *fmr2 = video_drvdata(file);
+	struct snd_tea575x *tea = container_of(ctrl->handler, struct snd_tea575x, ctrl_handler);
+	struct fmr2 *fmr2 = tea->private_data;
+	int volume, balance, left, right;
 
 	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value = fmr2->mute;
-		return 0;
 	case V4L2_CID_AUDIO_VOLUME:
-		ctrl->value = fmr2->curvol;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-					struct v4l2_control *ctrl)
-{
-	struct fmr2 *fmr2 = video_drvdata(file);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		fmr2->mute = ctrl->value;
+		volume = ctrl->val;
+		balance = fmr2->balance->cur.val;
 		break;
-	case V4L2_CID_AUDIO_VOLUME:
-		fmr2->curvol = ctrl->value;
+	case V4L2_CID_AUDIO_BALANCE:
+		balance = ctrl->val;
+		volume = fmr2->volume->cur.val;
 		break;
 	default:
 		return -EINVAL;
 	}
 
-#ifdef DEBUG
-	if (fmr2->curvol && !fmr2->mute)
-		printk(KERN_DEBUG "unmute\n");
-	else
-		printk(KERN_DEBUG "mute\n");
-#endif
-
-	mutex_lock(&fmr2->lock);
-	if (fmr2->curvol && !fmr2->mute) {
-		fmr2_setvolume(fmr2);
-		/* Set frequency and unmute card */
-		fmr2_setfreq(fmr2);
-	} else
-		fmr2_mute(fmr2->io);
-	mutex_unlock(&fmr2->lock);
-	return 0;
-}
-
-static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
-{
-	*i = 0;
-	return 0;
-}
+	left = right = volume;
+	if (balance < 0)
+		right = max(0, right + balance);
+	if (balance > 0)
+		left = max(0, left - balance);
 
-static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
-{
-	return i ? -EINVAL : 0;
-}
+	tc9154a_set_attenuation(fmr2, abs(left - 68), TC9154A_CHANNEL_LEFT);
+	tc9154a_set_attenuation(fmr2, abs(right - 68), TC9154A_CHANNEL_RIGHT);
 
-static int vidioc_g_audio(struct file *file, void *priv,
-					struct v4l2_audio *a)
-{
-	a->index = 0;
-	strlcpy(a->name, "Radio", sizeof(a->name));
-	a->capability = V4L2_AUDCAP_STEREO;
 	return 0;
 }
 
-static int vidioc_s_audio(struct file *file, void *priv,
-					struct v4l2_audio *a)
+static const struct v4l2_ctrl_ops fmr2_ctrl_ops = {
+	.s_ctrl = fmr2_s_ctrl,
+};
+
+static int fmr2_tea_ext_init(struct snd_tea575x *tea)
 {
-	return a->index ? -EINVAL : 0;
-}
+	struct fmr2 *fmr2 = tea->private_data;
 
-static const struct v4l2_file_operations fmr2_fops = {
-	.owner          = THIS_MODULE,
-	.unlocked_ioctl = video_ioctl2,
-};
+	if (inb(fmr2->io) & FMR2_HASVOL) {
+		fmr2->volume = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_VOLUME, 0, 68, 2, 56);
+		fmr2->balance = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_BALANCE, -68, 68, 2, 0);
+		if (tea->ctrl_handler.error) {
+			printk(KERN_ERR "radio-sf16fmr2: can't initialize contrls\n");
+			return tea->ctrl_handler.error;
+		}
+	}
 
-static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
-	.vidioc_querycap    = vidioc_querycap,
-	.vidioc_g_tuner     = vidioc_g_tuner,
-	.vidioc_s_tuner     = vidioc_s_tuner,
-	.vidioc_g_audio     = vidioc_g_audio,
-	.vidioc_s_audio     = vidioc_s_audio,
-	.vidioc_g_input     = vidioc_g_input,
-	.vidioc_s_input     = vidioc_s_input,
-	.vidioc_g_frequency = vidioc_g_frequency,
-	.vidioc_s_frequency = vidioc_s_frequency,
-	.vidioc_queryctrl   = vidioc_queryctrl,
-	.vidioc_g_ctrl      = vidioc_g_ctrl,
-	.vidioc_s_ctrl      = vidioc_s_ctrl,
-};
+	return 0;
+}
 
 static int __init fmr2_init(void)
 {
 	struct fmr2 *fmr2 = &fmr2_card;
-	struct v4l2_device *v4l2_dev = &fmr2->v4l2_dev;
-	int res;
 
-	strlcpy(v4l2_dev->name, "sf16fmr2", sizeof(v4l2_dev->name));
-	fmr2->io = io;
-	fmr2->stereo = 1;
-	mutex_init(&fmr2->lock);
+	fmr2->io = FMR2_PORT;
 
-	if (!request_region(fmr2->io, 2, "sf16fmr2")) {
-		v4l2_err(v4l2_dev, "request_region failed!\n");
+	if (!request_region(fmr2->io, 2, "SF16-FMR2")) {
+		printk(KERN_ERR "radio-sf16fmr2: I/O port 0x%x already in use\n", fmr2->io);
 		return -EBUSY;
 	}
 
-	res = v4l2_device_register(NULL, v4l2_dev);
-	if (res < 0) {
-		release_region(fmr2->io, 2);
-		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
-		return res;
-	}
+	fmr2->tea.private_data = fmr2;
+	fmr2->tea.ops = &fmr2_tea_ops;
+	fmr2->tea.ext_init = fmr2_tea_ext_init;
+	strlcpy(fmr2->tea.card, "SF16-FMR2", sizeof(fmr2->tea.card));
+	strcpy(fmr2->tea.bus_info, "ISA");
 
-	strlcpy(fmr2->vdev.name, v4l2_dev->name, sizeof(fmr2->vdev.name));
-	fmr2->vdev.v4l2_dev = v4l2_dev;
-	fmr2->vdev.fops = &fmr2_fops;
-	fmr2->vdev.ioctl_ops = &fmr2_ioctl_ops;
-	fmr2->vdev.release = video_device_release_empty;
-	video_set_drvdata(&fmr2->vdev, fmr2);
-
-	/* mute card - prevents noisy bootups */
-	fmr2_mute(fmr2->io);
-	fmr2_product_info(fmr2);
-
-	if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		v4l2_device_unregister(v4l2_dev);
+	if (snd_tea575x_init(&fmr2->tea)) {
+		printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n");
 		release_region(fmr2->io, 2);
-		return -EINVAL;
+		return -ENODEV;
 	}
 
-	v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io);
-	debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type));
+	printk(KERN_INFO "radio-sf16fmr2: SF16-FMR2 radio card at 0x%x.\n", fmr2->io);
 	return 0;
 }
 
@@ -443,22 +211,9 @@ static void __exit fmr2_exit(void)
 {
 	struct fmr2 *fmr2 = &fmr2_card;
 
-	video_unregister_device(&fmr2->vdev);
-	v4l2_device_unregister(&fmr2->v4l2_dev);
+	snd_tea575x_exit(&fmr2->tea);
 	release_region(fmr2->io, 2);
 }
 
 module_init(fmr2_init);
 module_exit(fmr2_exit);
-
-#ifndef MODULE
-
-static int __init fmr2_setup_io(char *str)
-{
-	get_option(&str, &io);
-	return 1;
-}
-
-__setup("sf16fmr2=", fmr2_setup_io);
-
-#endif
diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c
index 0e71d81..95ddcc4 100644
--- a/drivers/media/radio/radio-tea5764.c
+++ b/drivers/media/radio/radio-tea5764.c
@@ -39,10 +39,8 @@
 #include <linux/i2c.h>			/* I2C				*/
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
-#include <linux/version.h>      	/* for KERNEL_VERSION MACRO     */
 
-#define DRIVER_VERSION	"v0.01"
-#define RADIO_VERSION	KERNEL_VERSION(0, 0, 1)
+#define DRIVER_VERSION	"0.0.2"
 
 #define DRIVER_AUTHOR	"Fabio Belavenuto <belavenuto@gmail.com>"
 #define DRIVER_DESC	"A driver for the TEA5764 radio chip for EZX Phones."
@@ -300,7 +298,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->card, dev->name, sizeof(v->card));
 	snprintf(v->bus_info, sizeof(v->bus_info),
 		 "I2C:%s", dev_name(&dev->dev));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
@@ -595,8 +592,9 @@ static void __exit tea5764_exit(void)
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
 
-module_param(use_xtal, int, 1);
+module_param(use_xtal, int, 0);
 MODULE_PARM_DESC(use_xtal, "Chip have a xtal connected in board");
 module_param(radio_nr, int, 0);
 MODULE_PARM_DESC(radio_nr, "video4linux device number to use");
diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c
index a326639..f2ed9cc 100644
--- a/drivers/media/radio/radio-terratec.c
+++ b/drivers/media/radio/radio-terratec.c
@@ -29,7 +29,6 @@
 #include <linux/ioport.h>	/* request_region		*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <linux/mutex.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -37,6 +36,7 @@
 MODULE_AUTHOR("R.OFFERMANNS & others");
 MODULE_DESCRIPTION("A driver for the TerraTec ActiveRadio Standalone radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 #ifndef CONFIG_RADIO_TERRATEC_PORT
 #define CONFIG_RADIO_TERRATEC_PORT 0x590
@@ -49,8 +49,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the TerraTec ActiveRadio card (0x590 or 0x591)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 static struct v4l2_queryctrl radio_qctrl[] = {
 	{
 		.id            = V4L2_CID_AUDIO_MUTE,
@@ -205,7 +203,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "radio-terratec", sizeof(v->driver));
 	strlcpy(v->card, "ActiveRadio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-timb.c b/drivers/media/radio/radio-timb.c
index a185610..f17b540 100644
--- a/drivers/media/radio/radio-timb.c
+++ b/drivers/media/radio/radio-timb.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/version.h>
 #include <linux/io.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
@@ -44,7 +43,6 @@ static int timbradio_vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, DRIVER_NAME, sizeof(v->driver));
 	strlcpy(v->card, "Timberdale Radio", sizeof(v->card));
 	snprintf(v->bus_info, sizeof(v->bus_info), "platform:"DRIVER_NAME);
-	v->version = KERNEL_VERSION(0, 0, 1);
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
@@ -245,4 +243,5 @@ module_exit(timbradio_exit);
 MODULE_DESCRIPTION("Timberdale Radio driver");
 MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
 MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.0.2");
 MODULE_ALIAS("platform:"DRIVER_NAME);
diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c
index 22fa9cc..b3f45a0 100644
--- a/drivers/media/radio/radio-trust.c
+++ b/drivers/media/radio/radio-trust.c
@@ -19,7 +19,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/videodev2.h>
 #include <linux/io.h>
 #include <media/v4l2-device.h>
@@ -28,6 +27,7 @@
 MODULE_AUTHOR("Eric Lammerts, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
 MODULE_DESCRIPTION("A driver for the Trust FM Radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
 
@@ -42,8 +42,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the Trust FM Radio card (0x350 or 0x358)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct trust {
 	struct v4l2_device v4l2_dev;
 	struct video_device vdev;
@@ -196,7 +194,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "radio-trust", sizeof(v->driver));
 	strlcpy(v->card, "Trust FM Radio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
index 8dbbf08f..398726a 100644
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@@ -31,15 +31,17 @@
 #include <linux/module.h>	/* Modules                        */
 #include <linux/init.h>		/* Initdata                       */
 #include <linux/ioport.h>	/* request_region		  */
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/videodev2.h>	/* kernel radio structs           */
 #include <linux/io.h>		/* outb, outb_p                   */
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 
+#define DRIVER_VERSION "0.1.2"
+
 MODULE_AUTHOR("Dr. Henrik Seidel");
 MODULE_DESCRIPTION("A driver for the Typhoon radio card (a.k.a. EcoRadio).");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
 
 #ifndef CONFIG_RADIO_TYPHOON_PORT
 #define CONFIG_RADIO_TYPHOON_PORT -1
@@ -61,9 +63,7 @@ static unsigned long mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ;
 module_param(mutefreq, ulong, 0);
 MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)");
 
-#define RADIO_VERSION KERNEL_VERSION(0, 1, 1)
-
-#define BANNER "Typhoon Radio Card driver v0.1.1\n"
+#define BANNER "Typhoon Radio Card driver v" DRIVER_VERSION "\n"
 
 struct typhoon {
 	struct v4l2_device v4l2_dev;
@@ -171,7 +171,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-typhoon", sizeof(v->driver));
 	strlcpy(v->card, "Typhoon Radio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
index 459f727..46cacf8 100644
--- a/drivers/media/radio/radio-wl1273.c
+++ b/drivers/media/radio/radio-wl1273.c
@@ -1382,7 +1382,7 @@ static int wl1273_fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 
 	switch (ctrl->id) {
 	case  V4L2_CID_TUNE_ANTENNA_CAPACITOR:
-		ctrl->cur.val = wl1273_fm_get_tx_ctune(radio);
+		ctrl->val = wl1273_fm_get_tx_ctune(radio);
 		break;
 
 	default:
diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c
index af99c5b..f5613b9 100644
--- a/drivers/media/radio/radio-zoltrix.c
+++ b/drivers/media/radio/radio-zoltrix.c
@@ -35,7 +35,6 @@
 #include <linux/delay.h>	/* udelay, msleep                 */
 #include <linux/videodev2.h>	/* kernel radio structs           */
 #include <linux/mutex.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>		/* outb, outb_p                   */
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -43,6 +42,7 @@
 MODULE_AUTHOR("C.van Schaik");
 MODULE_DESCRIPTION("A driver for the Zoltrix Radio Plus.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 #ifndef CONFIG_RADIO_ZOLTRIX_PORT
 #define CONFIG_RADIO_ZOLTRIX_PORT -1
@@ -55,8 +55,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the Zoltrix Radio Plus (0x20c or 0x30c)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct zoltrix {
 	struct v4l2_device v4l2_dev;
 	struct video_device vdev;
@@ -228,7 +226,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-zoltrix", sizeof(v->driver));
 	strlcpy(v->card, "Zoltrix Radio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index a2a6777..fd3541b 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -24,10 +24,9 @@
 
 /* driver definitions */
 #define DRIVER_AUTHOR "Joonyoung Shim <jy0922.shim@samsung.com>";
-#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 1)
 #define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver"
 #define DRIVER_DESC "I2C radio driver for Si470x FM Radio Receivers"
-#define DRIVER_VERSION "1.0.1"
+#define DRIVER_VERSION "1.0.2"
 
 /* kernel includes */
 #include <linux/i2c.h>
@@ -248,7 +247,6 @@ int si470x_vidioc_querycap(struct file *file, void *priv,
 {
 	strlcpy(capability->driver, DRIVER_NAME, sizeof(capability->driver));
 	strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card));
-	capability->version = DRIVER_KERNEL_VERSION;
 	capability->capabilities = V4L2_CAP_HW_FREQ_SEEK |
 		V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index 392e84f..4cf5370 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -29,7 +29,6 @@
 
 /* driver definitions */
 #define DRIVER_AUTHOR "Tobias Lorenz <tobias.lorenz@gmx.net>"
-#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 10)
 #define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver"
 #define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers"
 #define DRIVER_VERSION "1.0.10"
@@ -626,7 +625,6 @@ int si470x_vidioc_querycap(struct file *file, void *priv,
 	strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card));
 	usb_make_path(radio->usbdev, capability->bus_info,
 			sizeof(capability->bus_info));
-	capability->version = DRIVER_KERNEL_VERSION;
 	capability->capabilities = V4L2_CAP_HW_FREQ_SEEK |
 		V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE;
 
@@ -699,7 +697,7 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 	radio->videodev = video_device_alloc();
 	if (!radio->videodev) {
 		retval = -ENOMEM;
-		goto err_intbuffer;
+		goto err_urb;
 	}
 	memcpy(radio->videodev, &si470x_viddev_template,
 			sizeof(si470x_viddev_template));
@@ -790,6 +788,8 @@ err_all:
 	kfree(radio->buffer);
 err_video:
 	video_device_release(radio->videodev);
+err_urb:
+	usb_free_urb(radio->int_in_urb);
 err_intbuffer:
 	kfree(radio->int_in_buffer);
 err_radio:
diff --git a/drivers/media/radio/si470x/radio-si470x.h b/drivers/media/radio/si470x/radio-si470x.h
index 68da001..f300a55 100644
--- a/drivers/media/radio/si470x/radio-si470x.h
+++ b/drivers/media/radio/si470x/radio-si470x.h
@@ -32,7 +32,6 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/input.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <linux/mutex.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/radio/wl128x/fmdrv.h b/drivers/media/radio/wl128x/fmdrv.h
index 1a45a5d..d84ad9d 100644
--- a/drivers/media/radio/wl128x/fmdrv.h
+++ b/drivers/media/radio/wl128x/fmdrv.h
@@ -28,14 +28,11 @@
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <linux/timer.h>
-#include <linux/version.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ctrls.h>
 
-#define FM_DRV_VERSION            "0.10"
-/* Should match with FM_DRV_VERSION */
-#define FM_DRV_RADIO_VERSION      KERNEL_VERSION(0, 0, 1)
+#define FM_DRV_VERSION            "0.1.1"
 #define FM_DRV_NAME               "ti_fmdrv"
 #define FM_DRV_CARD_SHORT_NAME    "TI FM Radio"
 #define FM_DRV_CARD_LONG_NAME     "Texas Instruments FM Radio"
diff --git a/drivers/media/radio/wl128x/fmdrv_v4l2.c b/drivers/media/radio/wl128x/fmdrv_v4l2.c
index 8701072..8c0e192 100644
--- a/drivers/media/radio/wl128x/fmdrv_v4l2.c
+++ b/drivers/media/radio/wl128x/fmdrv_v4l2.c
@@ -175,7 +175,6 @@ static int fm_v4l2_vidioc_querycap(struct file *file, void *priv,
 	strlcpy(capability->card, FM_DRV_CARD_SHORT_NAME,
 			sizeof(capability->card));
 	sprintf(capability->bus_info, "UART");
-	capability->version = FM_DRV_RADIO_VERSION;
 	capability->capabilities = V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_TUNER |
 		V4L2_CAP_RADIO | V4L2_CAP_MODULATOR |
 		V4L2_CAP_AUDIO | V4L2_CAP_READWRITE |
@@ -191,7 +190,7 @@ static int fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 
 	switch (ctrl->id) {
 	case  V4L2_CID_TUNE_ANTENNA_CAPACITOR:
-		ctrl->cur.val = fm_tx_get_tune_cap_val(fmdev);
+		ctrl->val = fm_tx_get_tune_cap_val(fmdev);
 		break;
 	default:
 		fmwarn("%s: Unknown IOCTL: %d\n", __func__, ctrl->id);
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 7d4bbc2..899f783 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -87,6 +87,17 @@ config IR_RC5_SZ_DECODER
 	   uses an IR protocol that is almost standard RC-5, but not quite,
 	   as it uses an additional bit).
 
+config IR_MCE_KBD_DECODER
+	tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
+	depends on RC_CORE
+	select BITREVERSE
+	default y
+
+	---help---
+	   Enable this option if you have a Microsoft Remote Keyboard for
+	   Windows Media Center Edition, which you would like to use with
+	   a raw IR receiver in your system.
+
 config IR_LIRC_CODEC
 	tristate "Enable IR to LIRC bridge"
 	depends on RC_CORE
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 52830e5..f224db0 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
 obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o
 obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
 obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o
+obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o
 obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 
 # stand-alone IR receivers/transmitters
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index a43ed6c..2b9c2569 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -953,13 +953,13 @@ static void ene_set_idle(struct rc_dev *rdev, bool idle)
 }
 
 /* outside interface: transmit */
-static int ene_transmit(struct rc_dev *rdev, int *buf, u32 n)
+static int ene_transmit(struct rc_dev *rdev, unsigned *buf, unsigned n)
 {
 	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 
 	dev->tx_buffer = buf;
-	dev->tx_len = n / sizeof(int);
+	dev->tx_len = n;
 	dev->tx_pos = 0;
 	dev->tx_reg = 0;
 	dev->tx_done = 0;
diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h
index 337a41d..017c209 100644
--- a/drivers/media/rc/ene_ir.h
+++ b/drivers/media/rc/ene_ir.h
@@ -235,7 +235,7 @@ struct ene_device {
 	bool tx_sample_pulse;			/* current sample is pulse */
 
 	/* TX buffer */
-	int *tx_buffer;				/* input samples buffer*/
+	unsigned *tx_buffer;			/* input samples buffer*/
 	int tx_pos;				/* position in that bufer */
 	int tx_len;				/* current len of tx buffer */
 	int tx_done;				/* done transmitting */
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index 1c5cc65..e5eeec4 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -103,19 +103,19 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
 {
 	struct lirc_codec *lirc;
 	struct rc_dev *dev;
-	int *txbuf; /* buffer with values to transmit */
-	int ret = 0;
+	unsigned int *txbuf; /* buffer with values to transmit */
+	ssize_t ret = 0;
 	size_t count;
 
 	lirc = lirc_get_pdata(file);
 	if (!lirc)
 		return -EFAULT;
 
-	if (n % sizeof(int))
+	if (n < sizeof(unsigned) || n % sizeof(unsigned))
 		return -EINVAL;
 
-	count = n / sizeof(int);
-	if (count > LIRCBUF_SIZE || count % 2 == 0 || n % sizeof(int) != 0)
+	count = n / sizeof(unsigned);
+	if (count > LIRCBUF_SIZE || count % 2 == 0)
 		return -EINVAL;
 
 	txbuf = memdup_user(buf, n);
@@ -129,7 +129,10 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
 	}
 
 	if (dev->tx_ir)
-		ret = dev->tx_ir(dev, txbuf, (u32)n);
+		ret = dev->tx_ir(dev, txbuf, count);
+
+	if (ret > 0)
+		ret *= sizeof(unsigned);
 
 out:
 	kfree(txbuf);
diff --git a/drivers/media/rc/ir-mce_kbd-decoder.c b/drivers/media/rc/ir-mce_kbd-decoder.c
new file mode 100644
index 0000000..3784ebf
--- /dev/null
+++ b/drivers/media/rc/ir-mce_kbd-decoder.c
@@ -0,0 +1,449 @@
+/* ir-mce_kbd-decoder.c - A decoder for the RC6-ish keyboard/mouse IR protocol
+ * used by the Microsoft Remote Keyboard for Windows Media Center Edition,
+ * referred to by Microsoft's Windows Media Center remote specification docs
+ * as "an internal protocol called MCIR-2".
+ *
+ * Copyright (C) 2011 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+
+#include "rc-core-priv.h"
+
+/*
+ * This decoder currently supports:
+ * - MCIR-2 29-bit IR signals used for mouse movement and buttons
+ * - MCIR-2 32-bit IR signals used for standard keyboard keys
+ *
+ * The media keys on the keyboard send RC-6 signals that are inditinguishable
+ * from the keys of the same name on the stock MCE remote, and will be handled
+ * by the standard RC-6 decoder, and be made available to the system via the
+ * input device for the remote, rather than the keyboard/mouse one.
+ */
+
+#define MCIR2_UNIT		333333	/* ns */
+#define MCIR2_HEADER_NBITS	5
+#define MCIR2_MOUSE_NBITS	29
+#define MCIR2_KEYBOARD_NBITS	32
+#define MCIR2_PREFIX_PULSE	(8 * MCIR2_UNIT)
+#define MCIR2_PREFIX_SPACE	(1 * MCIR2_UNIT)
+#define MCIR2_MAX_LEN		(3 * MCIR2_UNIT)
+#define MCIR2_BIT_START		(1 * MCIR2_UNIT)
+#define MCIR2_BIT_END		(1 * MCIR2_UNIT)
+#define MCIR2_BIT_0		(1 * MCIR2_UNIT)
+#define MCIR2_BIT_SET		(2 * MCIR2_UNIT)
+#define MCIR2_MODE_MASK		0xf	/* for the header bits */
+#define MCIR2_KEYBOARD_HEADER	0x4
+#define MCIR2_MOUSE_HEADER	0x1
+#define MCIR2_MASK_KEYS_START	0xe0
+
+enum mce_kbd_mode {
+	MCIR2_MODE_KEYBOARD,
+	MCIR2_MODE_MOUSE,
+	MCIR2_MODE_UNKNOWN,
+};
+
+enum mce_kbd_state {
+	STATE_INACTIVE,
+	STATE_HEADER_BIT_START,
+	STATE_HEADER_BIT_END,
+	STATE_BODY_BIT_START,
+	STATE_BODY_BIT_END,
+	STATE_FINISHED,
+};
+
+static unsigned char kbd_keycodes[256] = {
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_A,
+	KEY_B,		KEY_C,		KEY_D,		KEY_E,		KEY_F,
+	KEY_G,		KEY_H,		KEY_I,		KEY_J,		KEY_K,
+	KEY_L,		KEY_M,		KEY_N,		KEY_O,		KEY_P,
+	KEY_Q,		KEY_R,		KEY_S,		KEY_T,		KEY_U,
+	KEY_V,		KEY_W,		KEY_X,		KEY_Y,		KEY_Z,
+	KEY_1,		KEY_2,		KEY_3,		KEY_4,		KEY_5,
+	KEY_6,		KEY_7,		KEY_8,		KEY_9,		KEY_0,
+	KEY_ENTER,	KEY_ESC,	KEY_BACKSPACE,	KEY_TAB,	KEY_SPACE,
+	KEY_MINUS,	KEY_EQUAL,	KEY_LEFTBRACE,	KEY_RIGHTBRACE,	KEY_BACKSLASH,
+	KEY_RESERVED,	KEY_SEMICOLON,	KEY_APOSTROPHE,	KEY_GRAVE,	KEY_COMMA,
+	KEY_DOT,	KEY_SLASH,	KEY_CAPSLOCK,	KEY_F1,		KEY_F2,
+	KEY_F3,		KEY_F4,		KEY_F5,		KEY_F6,		KEY_F7,
+	KEY_F8,		KEY_F9,		KEY_F10,	KEY_F11,	KEY_F12,
+	KEY_SYSRQ,	KEY_SCROLLLOCK,	KEY_PAUSE,	KEY_INSERT,	KEY_HOME,
+	KEY_PAGEUP,	KEY_DELETE,	KEY_END,	KEY_PAGEDOWN,	KEY_RIGHT,
+	KEY_LEFT,	KEY_DOWN,	KEY_UP,		KEY_NUMLOCK,	KEY_KPSLASH,
+	KEY_KPASTERISK,	KEY_KPMINUS,	KEY_KPPLUS,	KEY_KPENTER,	KEY_KP1,
+	KEY_KP2,	KEY_KP3,	KEY_KP4,	KEY_KP5,	KEY_KP6,
+	KEY_KP7,	KEY_KP8,	KEY_KP9,	KEY_KP0,	KEY_KPDOT,
+	KEY_102ND,	KEY_COMPOSE,	KEY_POWER,	KEY_KPEQUAL,	KEY_F13,
+	KEY_F14,	KEY_F15,	KEY_F16,	KEY_F17,	KEY_F18,
+	KEY_F19,	KEY_F20,	KEY_F21,	KEY_F22,	KEY_F23,
+	KEY_F24,	KEY_OPEN,	KEY_HELP,	KEY_PROPS,	KEY_FRONT,
+	KEY_STOP,	KEY_AGAIN,	KEY_UNDO,	KEY_CUT,	KEY_COPY,
+	KEY_PASTE,	KEY_FIND,	KEY_MUTE,	KEY_VOLUMEUP,	KEY_VOLUMEDOWN,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_KPCOMMA,	KEY_RESERVED,
+	KEY_RO,		KEY_KATAKANAHIRAGANA, KEY_YEN,	KEY_HENKAN,	KEY_MUHENKAN,
+	KEY_KPJPCOMMA,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_HANGUEL,
+	KEY_HANJA,	KEY_KATAKANA,	KEY_HIRAGANA,	KEY_ZENKAKUHANKAKU, KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_LEFTCTRL,
+	KEY_LEFTSHIFT,	KEY_LEFTALT,	KEY_LEFTMETA,	KEY_RIGHTCTRL,	KEY_RIGHTSHIFT,
+	KEY_RIGHTALT,	KEY_RIGHTMETA,	KEY_PLAYPAUSE,	KEY_STOPCD,	KEY_PREVIOUSSONG,
+	KEY_NEXTSONG,	KEY_EJECTCD,	KEY_VOLUMEUP,	KEY_VOLUMEDOWN,	KEY_MUTE,
+	KEY_WWW,	KEY_BACK,	KEY_FORWARD,	KEY_STOP,	KEY_FIND,
+	KEY_SCROLLUP,	KEY_SCROLLDOWN,	KEY_EDIT,	KEY_SLEEP,	KEY_COFFEE,
+	KEY_REFRESH,	KEY_CALC,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED
+};
+
+static void mce_kbd_rx_timeout(unsigned long data)
+{
+	struct mce_kbd_dec *mce_kbd = (struct mce_kbd_dec *)data;
+	int i;
+	unsigned char maskcode;
+
+	IR_dprintk(2, "timer callback clearing all keys\n");
+
+	for (i = 0; i < 7; i++) {
+		maskcode = kbd_keycodes[MCIR2_MASK_KEYS_START + i];
+		input_report_key(mce_kbd->idev, maskcode, 0);
+	}
+
+	for (i = 0; i < MCIR2_MASK_KEYS_START; i++)
+		input_report_key(mce_kbd->idev, kbd_keycodes[i], 0);
+}
+
+static enum mce_kbd_mode mce_kbd_mode(struct mce_kbd_dec *data)
+{
+	switch (data->header & MCIR2_MODE_MASK) {
+	case MCIR2_KEYBOARD_HEADER:
+		return MCIR2_MODE_KEYBOARD;
+	case MCIR2_MOUSE_HEADER:
+		return MCIR2_MODE_MOUSE;
+	default:
+		return MCIR2_MODE_UNKNOWN;
+	}
+}
+
+static void ir_mce_kbd_process_keyboard_data(struct input_dev *idev,
+					     u32 scancode)
+{
+	u8 keydata   = (scancode >> 8) & 0xff;
+	u8 shiftmask = scancode & 0xff;
+	unsigned char keycode, maskcode;
+	int i, keystate;
+
+	IR_dprintk(1, "keyboard: keydata = 0x%02x, shiftmask = 0x%02x\n",
+		   keydata, shiftmask);
+
+	for (i = 0; i < 7; i++) {
+		maskcode = kbd_keycodes[MCIR2_MASK_KEYS_START + i];
+		if (shiftmask & (1 << i))
+			keystate = 1;
+		else
+			keystate = 0;
+		input_report_key(idev, maskcode, keystate);
+	}
+
+	if (keydata) {
+		keycode = kbd_keycodes[keydata];
+		input_report_key(idev, keycode, 1);
+	} else {
+		for (i = 0; i < MCIR2_MASK_KEYS_START; i++)
+			input_report_key(idev, kbd_keycodes[i], 0);
+	}
+}
+
+static void ir_mce_kbd_process_mouse_data(struct input_dev *idev, u32 scancode)
+{
+	/* raw mouse coordinates */
+	u8 xdata = (scancode >> 7) & 0x7f;
+	u8 ydata = (scancode >> 14) & 0x7f;
+	int x, y;
+	/* mouse buttons */
+	bool right = scancode & 0x40;
+	bool left  = scancode & 0x20;
+
+	if (xdata & 0x40)
+		x = -((~xdata & 0x7f) + 1);
+	else
+		x = xdata;
+
+	if (ydata & 0x40)
+		y = -((~ydata & 0x7f) + 1);
+	else
+		y = ydata;
+
+	IR_dprintk(1, "mouse: x = %d, y = %d, btns = %s%s\n",
+		   x, y, left ? "L" : "", right ? "R" : "");
+
+	input_report_rel(idev, REL_X, x);
+	input_report_rel(idev, REL_Y, y);
+
+	input_report_key(idev, BTN_LEFT, left);
+	input_report_key(idev, BTN_RIGHT, right);
+}
+
+/**
+ * ir_mce_kbd_decode() - Decode one mce_kbd pulse or space
+ * @dev:	the struct rc_dev descriptor of the device
+ * @ev:		the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev)
+{
+	struct mce_kbd_dec *data = &dev->raw->mce_kbd;
+	u32 scancode;
+	unsigned long delay;
+
+	if (!(dev->raw->enabled_protocols & RC_TYPE_MCE_KBD))
+		return 0;
+
+	if (!is_timing_event(ev)) {
+		if (ev.reset)
+			data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+	if (!geq_margin(ev.duration, MCIR2_UNIT, MCIR2_UNIT / 2))
+		goto out;
+
+again:
+	IR_dprintk(2, "started at state %i (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+	if (!geq_margin(ev.duration, MCIR2_UNIT, MCIR2_UNIT / 2))
+		return 0;
+
+	switch (data->state) {
+
+	case STATE_INACTIVE:
+		if (!ev.pulse)
+			break;
+
+		/* Note: larger margin on first pulse since each MCIR2_UNIT
+		   is quite short and some hardware takes some time to
+		   adjust to the signal */
+		if (!eq_margin(ev.duration, MCIR2_PREFIX_PULSE, MCIR2_UNIT))
+			break;
+
+		data->state = STATE_HEADER_BIT_START;
+		data->count = 0;
+		data->header = 0;
+		return 0;
+
+	case STATE_HEADER_BIT_START:
+		if (geq_margin(ev.duration, MCIR2_MAX_LEN, MCIR2_UNIT / 2))
+			break;
+
+		data->header <<= 1;
+		if (ev.pulse)
+			data->header |= 1;
+		data->count++;
+		data->state = STATE_HEADER_BIT_END;
+		return 0;
+
+	case STATE_HEADER_BIT_END:
+		if (!is_transition(&ev, &dev->raw->prev_ev))
+			break;
+
+		decrease_duration(&ev, MCIR2_BIT_END);
+
+		if (data->count != MCIR2_HEADER_NBITS) {
+			data->state = STATE_HEADER_BIT_START;
+			goto again;
+		}
+
+		switch (mce_kbd_mode(data)) {
+		case MCIR2_MODE_KEYBOARD:
+			data->wanted_bits = MCIR2_KEYBOARD_NBITS;
+			break;
+		case MCIR2_MODE_MOUSE:
+			data->wanted_bits = MCIR2_MOUSE_NBITS;
+			break;
+		default:
+			IR_dprintk(1, "not keyboard or mouse data\n");
+			goto out;
+		}
+
+		data->count = 0;
+		data->body = 0;
+		data->state = STATE_BODY_BIT_START;
+		goto again;
+
+	case STATE_BODY_BIT_START:
+		if (geq_margin(ev.duration, MCIR2_MAX_LEN, MCIR2_UNIT / 2))
+			break;
+
+		data->body <<= 1;
+		if (ev.pulse)
+			data->body |= 1;
+		data->count++;
+		data->state = STATE_BODY_BIT_END;
+		return 0;
+
+	case STATE_BODY_BIT_END:
+		if (!is_transition(&ev, &dev->raw->prev_ev))
+			break;
+
+		if (data->count == data->wanted_bits)
+			data->state = STATE_FINISHED;
+		else
+			data->state = STATE_BODY_BIT_START;
+
+		decrease_duration(&ev, MCIR2_BIT_END);
+		goto again;
+
+	case STATE_FINISHED:
+		if (ev.pulse)
+			break;
+
+		switch (data->wanted_bits) {
+		case MCIR2_KEYBOARD_NBITS:
+			scancode = data->body & 0xffff;
+			IR_dprintk(1, "keyboard data 0x%08x\n", data->body);
+			if (dev->timeout)
+				delay = usecs_to_jiffies(dev->timeout / 1000);
+			else
+				delay = msecs_to_jiffies(100);
+			mod_timer(&data->rx_timeout, jiffies + delay);
+			/* Pass data to keyboard buffer parser */
+			ir_mce_kbd_process_keyboard_data(data->idev, scancode);
+			break;
+		case MCIR2_MOUSE_NBITS:
+			scancode = data->body & 0x1fffff;
+			IR_dprintk(1, "mouse data 0x%06x\n", scancode);
+			/* Pass data to mouse buffer parser */
+			ir_mce_kbd_process_mouse_data(data->idev, scancode);
+			break;
+		default:
+			IR_dprintk(1, "not keyboard or mouse data\n");
+			goto out;
+		}
+
+		data->state = STATE_INACTIVE;
+		input_sync(data->idev);
+		return 0;
+	}
+
+out:
+	IR_dprintk(1, "failed at state %i (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+	data->state = STATE_INACTIVE;
+	input_sync(data->idev);
+	return -EINVAL;
+}
+
+static int ir_mce_kbd_register(struct rc_dev *dev)
+{
+	struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd;
+	struct input_dev *idev;
+	int i, ret;
+
+	idev = input_allocate_device();
+	if (!idev)
+		return -ENOMEM;
+
+	snprintf(mce_kbd->name, sizeof(mce_kbd->name),
+		 "MCE IR Keyboard/Mouse (%s)", dev->driver_name);
+	strlcat(mce_kbd->phys, "/input0", sizeof(mce_kbd->phys));
+
+	idev->name = mce_kbd->name;
+	idev->phys = mce_kbd->phys;
+
+	/* Keyboard bits */
+	set_bit(EV_KEY, idev->evbit);
+	set_bit(EV_REP, idev->evbit);
+	for (i = 0; i < sizeof(kbd_keycodes); i++)
+		set_bit(kbd_keycodes[i], idev->keybit);
+
+	/* Mouse bits */
+	set_bit(EV_REL, idev->evbit);
+	set_bit(REL_X, idev->relbit);
+	set_bit(REL_Y, idev->relbit);
+	set_bit(BTN_LEFT, idev->keybit);
+	set_bit(BTN_RIGHT, idev->keybit);
+
+	/* Report scancodes too */
+	set_bit(EV_MSC, idev->evbit);
+	set_bit(MSC_SCAN, idev->mscbit);
+
+	setup_timer(&mce_kbd->rx_timeout, mce_kbd_rx_timeout,
+		    (unsigned long)mce_kbd);
+
+	input_set_drvdata(idev, mce_kbd);
+
+#if 0
+	/* Adding this reference means two input devices are associated with
+	 * this rc-core device, which ir-keytable doesn't cope with yet */
+	idev->dev.parent = &dev->dev;
+#endif
+
+	ret = input_register_device(idev);
+	if (ret < 0) {
+		input_free_device(idev);
+		return -EIO;
+	}
+
+	mce_kbd->idev = idev;
+
+	return 0;
+}
+
+static int ir_mce_kbd_unregister(struct rc_dev *dev)
+{
+	struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd;
+	struct input_dev *idev = mce_kbd->idev;
+
+	del_timer_sync(&mce_kbd->rx_timeout);
+	input_unregister_device(idev);
+
+	return 0;
+}
+
+static struct ir_raw_handler mce_kbd_handler = {
+	.protocols	= RC_TYPE_MCE_KBD,
+	.decode		= ir_mce_kbd_decode,
+	.raw_register	= ir_mce_kbd_register,
+	.raw_unregister	= ir_mce_kbd_unregister,
+};
+
+static int __init ir_mce_kbd_decode_init(void)
+{
+	ir_raw_handler_register(&mce_kbd_handler);
+
+	printk(KERN_INFO "IR MCE Keyboard/mouse protocol handler initialized\n");
+	return 0;
+}
+
+static void __exit ir_mce_kbd_decode_exit(void)
+{
+	ir_raw_handler_unregister(&mce_kbd_handler);
+}
+
+module_init(ir_mce_kbd_decode_init);
+module_exit(ir_mce_kbd_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_DESCRIPTION("MCE Keyboard/mouse IR protocol decoder");
diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c
index 423ed45..27808bb5 100644
--- a/drivers/media/rc/ir-raw.c
+++ b/drivers/media/rc/ir-raw.c
@@ -355,6 +355,7 @@ static void init_decoders(struct work_struct *work)
 	load_rc6_decode();
 	load_jvc_decode();
 	load_sony_decode();
+	load_mce_kbd_decode();
 	load_lirc_codec();
 
 	/* If needed, we may later add some init code. In this case,
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index d20168f..682009d 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -382,7 +382,7 @@ static int ite_set_tx_duty_cycle(struct rc_dev *rcdev, u32 duty_cycle)
 /* transmit out IR pulses; what you get here is a batch of alternating
  * pulse/space/pulse/space lengths that we should write out completely through
  * the FIFO, blocking on a full FIFO */
-static int ite_tx_ir(struct rc_dev *rcdev, int *txbuf, u32 n)
+static int ite_tx_ir(struct rc_dev *rcdev, unsigned *txbuf, unsigned n)
 {
 	unsigned long flags;
 	struct ite_dev *dev = rcdev->priv;
@@ -398,9 +398,6 @@ static int ite_tx_ir(struct rc_dev *rcdev, int *txbuf, u32 n)
 	/* clear the array just in case */
 	memset(last_sent, 0, ARRAY_SIZE(last_sent));
 
-	/* n comes in bytes; convert to ints */
-	n /= sizeof(int);
-
 	spin_lock_irqsave(&dev->lock, flags);
 
 	/* let everybody know we're now transmitting */
diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c
index 01b69bc..c3907e2 100644
--- a/drivers/media/rc/keymaps/rc-rc6-mce.c
+++ b/drivers/media/rc/keymaps/rc-rc6-mce.c
@@ -29,7 +29,7 @@ static struct rc_map_table rc6_mce[] = {
 
 	{ 0x800f040a, KEY_DELETE },
 	{ 0x800f040b, KEY_ENTER },
-	{ 0x800f040c, KEY_POWER },		/* PC Power */
+	{ 0x800f040c, KEY_SLEEP },		/* Formerly PC Power */
 	{ 0x800f040d, KEY_MEDIA },		/* Windows MCE button */
 	{ 0x800f040e, KEY_MUTE },
 	{ 0x800f040f, KEY_INFO },
@@ -44,7 +44,6 @@ static struct rc_map_table rc6_mce[] = {
 	{ 0x800f0416, KEY_PLAY },
 	{ 0x800f0417, KEY_RECORD },
 	{ 0x800f0418, KEY_PAUSE },
-	{ 0x800f046e, KEY_PLAYPAUSE },
 	{ 0x800f0419, KEY_STOP },
 	{ 0x800f041a, KEY_NEXT },
 	{ 0x800f041b, KEY_PREVIOUS },
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index ec972dc..85ff9a1 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -692,20 +692,18 @@ static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size)
 }
 
 /* Send data out the IR blaster port(s) */
-static int mceusb_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
+static int mceusb_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count)
 {
 	struct mceusb_dev *ir = dev->priv;
 	int i, ret = 0;
-	int count, cmdcount = 0;
+	int cmdcount = 0;
 	unsigned char *cmdbuf; /* MCE command buffer */
 	long signal_duration = 0; /* Singnal length in us */
 	struct timeval start_time, end_time;
 
 	do_gettimeofday(&start_time);
 
-	count = n / sizeof(int);
-
-	cmdbuf = kzalloc(sizeof(int) * MCE_CMDBUF_SIZE, GFP_KERNEL);
+	cmdbuf = kzalloc(sizeof(unsigned) * MCE_CMDBUF_SIZE, GFP_KERNEL);
 	if (!cmdbuf)
 		return -ENOMEM;
 
@@ -774,7 +772,7 @@ static int mceusb_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
 
 out:
 	kfree(cmdbuf);
-	return ret ? ret : n;
+	return ret ? ret : count;
 }
 
 /* Sets active IR outputs -- mce devices typically have two */
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index ce595f9..eae05b5 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -546,24 +546,18 @@ static int nvt_set_tx_carrier(struct rc_dev *dev, u32 carrier)
  * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
  * set TXFCONT as 0xff, until buf_count less than 0xff.
  */
-static int nvt_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
+static int nvt_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned n)
 {
 	struct nvt_dev *nvt = dev->priv;
 	unsigned long flags;
-	size_t cur_count;
 	unsigned int i;
 	u8 iren;
 	int ret;
 
 	spin_lock_irqsave(&nvt->tx.lock, flags);
 
-	if (n >= TX_BUF_LEN) {
-		nvt->tx.buf_count = cur_count = TX_BUF_LEN;
-		ret = TX_BUF_LEN;
-	} else {
-		nvt->tx.buf_count = cur_count = n;
-		ret = n;
-	}
+	ret = min((unsigned)(TX_BUF_LEN / sizeof(unsigned)), n);
+	nvt->tx.buf_count = (ret * sizeof(unsigned));
 
 	memcpy(nvt->tx.buf, txbuf, nvt->tx.buf_count);
 
diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 873b387..04c2c72 100644
--- a/drivers/media/rc/rc-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -84,6 +84,17 @@ struct ir_raw_event_ctrl {
 		unsigned count;
 		unsigned wanted_bits;
 	} rc5_sz;
+	struct mce_kbd_dec {
+		struct input_dev *idev;
+		struct timer_list rx_timeout;
+		char name[64];
+		char phys[64];
+		int state;
+		u8 header;
+		u32 body;
+		unsigned count;
+		unsigned wanted_bits;
+	} mce_kbd;
 	struct lirc_codec {
 		struct rc_dev *dev;
 		struct lirc_driver *drv;
@@ -182,6 +193,13 @@ void ir_raw_init(void);
 #define load_sony_decode()	0
 #endif
 
+/* from ir-mce_kbd-decoder.c */
+#ifdef CONFIG_IR_MCE_KBD_DECODER_MODULE
+#define load_mce_kbd_decode()	request_module("ir-mce_kbd-decoder")
+#else
+#define load_mce_kbd_decode()	0
+#endif
+
 /* from ir-lirc-codec.c */
 #ifdef CONFIG_IR_LIRC_CODEC_MODULE
 #define load_lirc_codec()	request_module("ir-lirc-codec")
diff --git a/drivers/media/rc/rc-loopback.c b/drivers/media/rc/rc-loopback.c
index cc846b2..efc6a51 100644
--- a/drivers/media/rc/rc-loopback.c
+++ b/drivers/media/rc/rc-loopback.c
@@ -101,21 +101,14 @@ static int loop_set_rx_carrier_range(struct rc_dev *dev, u32 min, u32 max)
 	return 0;
 }
 
-static int loop_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
+static int loop_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count)
 {
 	struct loopback_dev *lodev = dev->priv;
 	u32 rxmask;
-	unsigned count;
 	unsigned total_duration = 0;
 	unsigned i;
 	DEFINE_IR_RAW_EVENT(rawir);
 
-	if (n == 0 || n % sizeof(int)) {
-		dprintk("invalid tx buffer size\n");
-		return -EINVAL;
-	}
-
-	count = n / sizeof(int);
 	for (i = 0; i < count; i++)
 		total_duration += abs(txbuf[i]);
 
@@ -142,7 +135,7 @@ static int loop_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
 
 	for (i = 0; i < count; i++) {
 		rawir.pulse = i % 2 ? false : true;
-		rawir.duration = abs(txbuf[i]) * 1000;
+		rawir.duration = txbuf[i] * 1000;
 		if (rawir.duration)
 			ir_raw_event_store_with_filter(dev, &rawir);
 	}
@@ -158,7 +151,7 @@ out:
 	/* Lirc expects this function to take as long as the total duration */
 	set_current_state(TASK_INTERRUPTIBLE);
 	schedule_timeout(usecs_to_jiffies(total_duration));
-	return n;
+	return count;
 }
 
 static void loop_set_idle(struct rc_dev *dev, bool enable)
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 3186ac7..51a23f4 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -735,6 +735,7 @@ static struct {
 	{ RC_TYPE_JVC,		"jvc"		},
 	{ RC_TYPE_SONY,		"sony"		},
 	{ RC_TYPE_RC5_SZ,	"rc-5-sz"	},
+	{ RC_TYPE_MCE_KBD,	"mce_kbd"	},
 	{ RC_TYPE_LIRC,		"lirc"		},
 	{ RC_TYPE_OTHER,	"other"		},
 };
@@ -1099,7 +1100,6 @@ int rc_register_device(struct rc_dev *dev)
 		if (rc < 0)
 			goto out_input;
 	}
-	mutex_unlock(&dev->lock);
 
 	if (dev->change_protocol) {
 		rc = dev->change_protocol(dev, rc_map->rc_type);
@@ -1107,6 +1107,8 @@ int rc_register_device(struct rc_dev *dev)
 			goto out_raw;
 	}
 
+	mutex_unlock(&dev->lock);
+
 	IR_dprintk(1, "Registered rc%ld (driver: %s, remote: %s, mode %s)\n",
 		   dev->devno,
 		   dev->driver_name ? dev->driver_name : "unknown",
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 5147767..a166044 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -205,6 +205,7 @@ struct redrat3_dev {
 
 	/* rx signal timeout timer */
 	struct timer_list rx_timeout;
+	u32 hw_timeout;
 
 	/* Is the device currently receiving? */
 	bool recv_in_progress;
@@ -414,20 +415,10 @@ static u32 redrat3_us_to_len(u32 microsec)
 
 }
 
-/* timer callback to send long trailing space on receive timeout */
+/* timer callback to send reset event */
 static void redrat3_rx_timeout(unsigned long data)
 {
 	struct redrat3_dev *rr3 = (struct redrat3_dev *)data;
-	DEFINE_IR_RAW_EVENT(rawir);
-
-	rawir.pulse = false;
-	rawir.duration = rr3->rc->timeout;
-	rr3_dbg(rr3->dev, "storing trailing space with duration %d\n",
-		rawir.duration);
-	ir_raw_event_store_with_filter(rr3->rc, &rawir);
-
-	rr3_dbg(rr3->dev, "calling ir_raw_event_handle\n");
-	ir_raw_event_handle(rr3->rc);
 
 	rr3_dbg(rr3->dev, "calling ir_raw_event_reset\n");
 	ir_raw_event_reset(rr3->rc);
@@ -438,7 +429,7 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 	DEFINE_IR_RAW_EVENT(rawir);
 	struct redrat3_signal_header header;
 	struct device *dev;
-	int i;
+	int i, trailer = 0;
 	unsigned long delay;
 	u32 mod_freq, single_len;
 	u16 *len_vals;
@@ -464,7 +455,8 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 	if (!(header.length >= RR3_HEADER_LENGTH))
 		dev_warn(dev, "read returned less than rr3 header len\n");
 
-	delay = usecs_to_jiffies(rr3->rc->timeout / 1000);
+	/* Make sure we reset the IR kfifo after a bit of inactivity */
+	delay = usecs_to_jiffies(rr3->hw_timeout);
 	mod_timer(&rr3->rx_timeout, jiffies + delay);
 
 	memcpy(&tmp32, sig_data + RR3_PAUSE_OFFSET, sizeof(tmp32));
@@ -506,9 +498,6 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 		u16 val = len_vals[data_vals[i]];
 		single_len = redrat3_len_to_us((u32)be16_to_cpu(val));
 
-		/* cap the value to IR_MAX_DURATION */
-		single_len &= IR_MAX_DURATION;
-
 		/* we should always get pulse/space/pulse/space samples */
 		if (i % 2)
 			rawir.pulse = false;
@@ -516,6 +505,12 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 			rawir.pulse = true;
 
 		rawir.duration = US_TO_NS(single_len);
+		/* Save initial pulse length to fudge trailer */
+		if (i == 0)
+			trailer = rawir.duration;
+		/* cap the value to IR_MAX_DURATION */
+		rawir.duration &= IR_MAX_DURATION;
+
 		rr3_dbg(dev, "storing %s with duration %d (i: %d)\n",
 			rawir.pulse ? "pulse" : "space", rawir.duration, i);
 		ir_raw_event_store_with_filter(rr3->rc, &rawir);
@@ -525,7 +520,10 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 	if (i % 2) {
 		rawir.pulse = false;
 		/* this duration is made up, and may not be ideal... */
-		rawir.duration = rr3->rc->timeout / 2;
+		if (trailer < US_TO_NS(1000))
+			rawir.duration = US_TO_NS(2800);
+		else
+			rawir.duration = trailer;
 		rr3_dbg(dev, "storing trailing space with duration %d\n",
 			rawir.duration);
 		ir_raw_event_store_with_filter(rr3->rc, &rawir);
@@ -629,36 +627,31 @@ static inline void redrat3_delete(struct redrat3_dev *rr3,
 	kfree(rr3);
 }
 
-static u32 redrat3_get_timeout(struct device *dev,
-			       struct rc_dev *rc, struct usb_device *udev)
+static u32 redrat3_get_timeout(struct redrat3_dev *rr3)
 {
 	u32 *tmp;
-	u32 timeout = MS_TO_NS(150); /* a sane default, if things go haywire */
+	u32 timeout = MS_TO_US(150); /* a sane default, if things go haywire */
 	int len, ret, pipe;
 
 	len = sizeof(*tmp);
 	tmp = kzalloc(len, GFP_KERNEL);
 	if (!tmp) {
-		dev_warn(dev, "Memory allocation faillure\n");
+		dev_warn(rr3->dev, "Memory allocation faillure\n");
 		return timeout;
 	}
 
-	pipe = usb_rcvctrlpipe(udev, 0);
-	ret = usb_control_msg(udev, pipe, RR3_GET_IR_PARAM,
+	pipe = usb_rcvctrlpipe(rr3->udev, 0);
+	ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM,
 			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 			      RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5);
 	if (ret != len) {
-		dev_warn(dev, "Failed to read timeout from hardware\n");
+		dev_warn(rr3->dev, "Failed to read timeout from hardware\n");
 		return timeout;
 	}
 
-	timeout = US_TO_NS(redrat3_len_to_us(be32_to_cpu(*tmp)));
-	if (timeout < rc->min_timeout)
-		timeout = rc->min_timeout;
-	else if (timeout > rc->max_timeout)
-		timeout = rc->max_timeout;
+	timeout = redrat3_len_to_us(be32_to_cpu(*tmp));
 
-	rr3_dbg(dev, "Got timeout of %d ms\n", timeout / (1000 * 1000));
+	rr3_dbg(rr3->dev, "Got timeout of %d ms\n", timeout / 1000);
 	return timeout;
 }
 
@@ -1110,9 +1103,7 @@ static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3)
 	rc->priv = rr3;
 	rc->driver_type = RC_DRIVER_IR_RAW;
 	rc->allowed_protos = RC_TYPE_ALL;
-	rc->min_timeout = MS_TO_NS(RR3_RX_MIN_TIMEOUT);
-	rc->max_timeout = MS_TO_NS(RR3_RX_MAX_TIMEOUT);
-	rc->timeout = redrat3_get_timeout(dev, rc, rr3->udev);
+	rc->timeout = US_TO_NS(2750);
 	rc->tx_ir = redrat3_transmit_ir;
 	rc->s_tx_carrier = redrat3_set_tx_carrier;
 	rc->driver_name = DRIVER_NAME;
@@ -1186,7 +1177,7 @@ static int __devinit redrat3_dev_probe(struct usb_interface *intf,
 	rr3 = kzalloc(sizeof(*rr3), GFP_KERNEL);
 	if (rr3 == NULL) {
 		dev_err(dev, "Memory allocation failure\n");
-		goto error;
+		goto no_endpoints;
 	}
 
 	rr3->dev = &intf->dev;
@@ -1242,6 +1233,9 @@ static int __devinit redrat3_dev_probe(struct usb_interface *intf,
 	if (retval < 0)
 		goto error;
 
+	/* store current hardware timeout, in us, will use for kfifo resets */
+	rr3->hw_timeout = redrat3_get_timeout(rr3);
+
 	/* default.. will get overridden by any sends with a freq defined */
 	rr3->carrier = 38000;
 
@@ -1280,6 +1274,7 @@ static void __devexit redrat3_dev_disconnect(struct usb_interface *intf)
 
 	usb_set_intfdata(intf, NULL);
 	rc_unregister_device(rr3->rc);
+	del_timer_sync(&rr3->rx_timeout);
 	redrat3_delete(rr3, udev);
 
 	rr3_ftr(&intf->dev, "RedRat3 IR Transceiver now disconnected\n");
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 5d06b89..bec8abc 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -6,8 +6,8 @@
  *  could probably support others (Winbond WEC102X, NatSemi, etc)
  *  with minor modifications.
  *
- *  Original Author: David Härdeman <david@hardeman.nu>
- *     Copyright (C) 2009 - 2010 David Härdeman <david@hardeman.nu>
+ *  Original Author: David Härdeman <david@hardeman.nu>
+ *     Copyright (C) 2009 - 2011 David Härdeman <david@hardeman.nu>
  *
  *  Dedicated to my daughter Matilda, without whose loving attention this
  *  driver would have been finished in half the time and with a fraction
@@ -577,16 +577,12 @@ wbcir_txmask(struct rc_dev *dev, u32 mask)
 }
 
 static int
-wbcir_tx(struct rc_dev *dev, int *buf, u32 bufsize)
+wbcir_tx(struct rc_dev *dev, unsigned *buf, unsigned count)
 {
 	struct wbcir_data *data = dev->priv;
-	u32 count;
 	unsigned i;
 	unsigned long flags;
 
-	/* bufsize has been sanity checked by the caller */
-	count = bufsize / sizeof(int);
-
 	/* Not sure if this is possible, but better safe than sorry */
 	spin_lock_irqsave(&data->spinlock, flags);
 	if (data->txstate != WBCIR_TXSTATE_INACTIVE) {
@@ -876,18 +872,8 @@ wbcir_init_hw(struct wbcir_data *data)
 	/* prescaler 1.0, tx/rx fifo lvl 16 */
 	outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
 
-	/* Set baud divisor to generate one byte per bit/cell */
-	switch (protocol) {
-	case IR_PROTOCOL_RC5:
-		outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	case IR_PROTOCOL_RC6:
-		outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	case IR_PROTOCOL_NEC:
-		outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	}
+	/* Set baud divisor to sample every 10 us */
+	outb(0x0F, data->sbase + WBCIR_REG_SP3_BGDL);
 	outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
 
 	/* Set CEIR mode */
@@ -896,9 +882,9 @@ wbcir_init_hw(struct wbcir_data *data)
 	inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
 	inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
 
-	/* Disable RX demod, run-length encoding/decoding, set freq span */
+	/* Disable RX demod, enable run-length enc/dec, set freq span */
 	wbcir_select_bank(data, WBCIR_BANK_7);
-	outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
+	outb(0x90, data->sbase + WBCIR_REG_SP3_RCCFG);
 
 	/* Disable timer */
 	wbcir_select_bank(data, WBCIR_BANK_4);
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index bb53de7..f574dc0 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -489,6 +489,15 @@ config VIDEO_TCM825X
 	  This is a driver for the Toshiba TCM825x VGA camera sensor.
 	  It is used for example in Nokia N800.
 
+comment "Flash devices"
+
+config VIDEO_ADP1653
+	tristate "ADP1653 flash support"
+	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	---help---
+	  This is a driver for the ADP1653 flash controller. It is used for
+	  example in Nokia N900.
+
 comment "Video improvement chips"
 
 config VIDEO_UPD64031A
@@ -707,6 +716,8 @@ source "drivers/media/video/cx18/Kconfig"
 
 source "drivers/media/video/saa7164/Kconfig"
 
+source "drivers/media/video/marvell-ccic/Kconfig"
+
 config VIDEO_M32R_AR
 	tristate "AR devices"
 	depends on M32R && VIDEO_V4L2
@@ -726,15 +737,6 @@ config VIDEO_M32R_AR_M64278
 	  To compile this driver as a module, choose M here: the
 	  module will be called arv.
 
-config VIDEO_CAFE_CCIC
-	tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
-	depends on PCI && I2C && VIDEO_V4L2
-	select VIDEO_OV7670
-	---help---
-	  This is a video4linux2 driver for the Marvell 88ALP01 integrated
-	  CMOS camera controller.  This is the controller found on first-
-	  generation OLPC systems.
-
 config VIDEO_SR030PC30
 	tristate "SR030PC30 VGA camera sensor support"
 	depends on I2C && VIDEO_V4L2
@@ -846,6 +848,12 @@ config SOC_CAMERA_OV2640
 	help
 	  This is a ov2640 camera driver
 
+config SOC_CAMERA_OV5642
+	tristate "ov5642 camera support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This is a V4L2 camera driver for the OmniVision OV5642 sensor
+
 config SOC_CAMERA_OV6650
 	tristate "ov6650 sensor support"
 	depends on SOC_CAMERA && I2C
@@ -952,6 +960,14 @@ config  VIDEO_SAMSUNG_S5P_FIMC
 	  To compile this driver as a module, choose M here: the
 	  module will be called s5p-fimc.
 
+config VIDEO_ATMEL_ISI
+	tristate "ATMEL Image Sensor Interface (ISI) support"
+	depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91
+	select VIDEOBUF2_DMA_CONTIG
+	---help---
+	  This module makes the ATMEL Image Sensor Interface available
+	  as a v4l2 device.
+
 config VIDEO_S5P_MIPI_CSIS
 	tristate "Samsung S5P and EXYNOS4 MIPI CSI receiver driver"
 	depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P && VIDEO_V4L2_SUBDEV_API
@@ -961,6 +977,8 @@ config VIDEO_S5P_MIPI_CSIS
 	  To compile this driver as a module, choose M here: the
 	  module will be called s5p-csis.
 
+source "drivers/media/video/s5p-tv/Kconfig"
+
 #
 # USB Multimedia device configuration
 #
@@ -1056,4 +1074,12 @@ config VIDEO_MEM2MEM_TESTDEV
 	  framework.
 
 
+config VIDEO_SAMSUNG_S5P_MFC
+	tristate "Samsung S5P MFC 5.1 Video Codec"
+	depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
+	select VIDEOBUF2_DMA_CONTIG
+	default n
+	help
+	    MFC 5.1 driver for V4L2.
+
 endif # V4L_MEM2MEM_DRIVERS
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index f0fecd6..2723900 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
 obj-$(CONFIG_VIDEO_SR030PC30)	+= sr030pc30.o
 obj-$(CONFIG_VIDEO_NOON010PC30)	+= noon010pc30.o
 obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
+obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
 
 obj-$(CONFIG_SOC_CAMERA_IMX074)		+= imx074.o
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
@@ -78,6 +79,7 @@ obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
 obj-$(CONFIG_SOC_CAMERA_MT9T112)	+= mt9t112.o
 obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
 obj-$(CONFIG_SOC_CAMERA_OV2640)		+= ov2640.o
+obj-$(CONFIG_SOC_CAMERA_OV5642)		+= ov5642.o
 obj-$(CONFIG_SOC_CAMERA_OV6650)		+= ov6650.o
 obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
 obj-$(CONFIG_SOC_CAMERA_OV9640)		+= ov9640.o
@@ -127,7 +129,8 @@ obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
 
 obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
 
-obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
+obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/
+obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/
 
 obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
 
@@ -166,8 +169,11 @@ obj-$(CONFIG_VIDEO_PXA27x)		+= pxa_camera.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2)	+= sh_mobile_csi2.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o
 obj-$(CONFIG_VIDEO_OMAP1)		+= omap1_camera.o
+obj-$(CONFIG_VIDEO_ATMEL_ISI)		+= atmel-isi.o
 
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) 	+= s5p-fimc/
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC)	+= s5p-mfc/
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV)	+= s5p-tv/
 
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci/
 
diff --git a/drivers/media/video/adp1653.c b/drivers/media/video/adp1653.c
new file mode 100644
index 0000000..be7befd
--- /dev/null
+++ b/drivers/media/video/adp1653.c
@@ -0,0 +1,491 @@
+/*
+ * drivers/media/video/adp1653.c
+ *
+ * Copyright (C) 2008--2011 Nokia Corporation
+ *
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Contributors:
+ *	Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *	Tuukka Toivonen <tuukkat76@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * TODO:
+ * - fault interrupt handling
+ * - hardware strobe
+ * - power doesn't need to be ON if all lights are off
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <media/adp1653.h>
+#include <media/v4l2-device.h>
+
+#define TIMEOUT_MAX		820000
+#define TIMEOUT_STEP		54600
+#define TIMEOUT_MIN		(TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \
+				 * TIMEOUT_STEP)
+#define TIMEOUT_US_TO_CODE(t)	((TIMEOUT_MAX + (TIMEOUT_STEP / 2) - (t)) \
+				 / TIMEOUT_STEP)
+#define TIMEOUT_CODE_TO_US(c)	(TIMEOUT_MAX - (c) * TIMEOUT_STEP)
+
+/* Write values into ADP1653 registers. */
+static int adp1653_update_hw(struct adp1653_flash *flash)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+	u8 out_sel;
+	u8 config = 0;
+	int rval;
+
+	out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG(
+		flash->indicator_intensity->val)
+		<< ADP1653_REG_OUT_SEL_ILED_SHIFT;
+
+	switch (flash->led_mode->val) {
+	case V4L2_FLASH_LED_MODE_NONE:
+		break;
+	case V4L2_FLASH_LED_MODE_FLASH:
+		/* Flash mode, light on with strobe, duration from timer */
+		config = ADP1653_REG_CONFIG_TMR_CFG;
+		config |= TIMEOUT_US_TO_CODE(flash->flash_timeout->val)
+			  << ADP1653_REG_CONFIG_TMR_SET_SHIFT;
+		break;
+	case V4L2_FLASH_LED_MODE_TORCH:
+		/* Torch mode, light immediately on, duration indefinite */
+		out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG(
+			flash->torch_intensity->val)
+			<< ADP1653_REG_OUT_SEL_HPLED_SHIFT;
+		break;
+	}
+
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel);
+	if (rval < 0)
+		return rval;
+
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_CONFIG, config);
+	if (rval < 0)
+		return rval;
+
+	return 0;
+}
+
+static int adp1653_get_fault(struct adp1653_flash *flash)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+	int fault;
+	int rval;
+
+	fault = i2c_smbus_read_byte_data(client, ADP1653_REG_FAULT);
+	if (IS_ERR_VALUE(fault))
+		return fault;
+
+	flash->fault |= fault;
+
+	if (!flash->fault)
+		return 0;
+
+	/* Clear faults. */
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0);
+	if (IS_ERR_VALUE(rval))
+		return rval;
+
+	flash->led_mode->val = V4L2_FLASH_LED_MODE_NONE;
+
+	rval = adp1653_update_hw(flash);
+	if (IS_ERR_VALUE(rval))
+		return rval;
+
+	return flash->fault;
+}
+
+static int adp1653_strobe(struct adp1653_flash *flash, int enable)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+	u8 out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG(
+		flash->indicator_intensity->val)
+		<< ADP1653_REG_OUT_SEL_ILED_SHIFT;
+	int rval;
+
+	if (flash->led_mode->val != V4L2_FLASH_LED_MODE_FLASH)
+		return -EBUSY;
+
+	if (!enable)
+		return i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL,
+						 out_sel);
+
+	out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG(
+		flash->flash_intensity->val)
+		<< ADP1653_REG_OUT_SEL_HPLED_SHIFT;
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel);
+	if (rval)
+		return rval;
+
+	/* Software strobe using i2c */
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE,
+		ADP1653_REG_SW_STROBE_SW_STROBE);
+	if (rval)
+		return rval;
+	return i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, 0);
+}
+
+/* --------------------------------------------------------------------------
+ * V4L2 controls
+ */
+
+static int adp1653_get_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct adp1653_flash *flash =
+		container_of(ctrl->handler, struct adp1653_flash, ctrls);
+	int rval;
+
+	rval = adp1653_get_fault(flash);
+	if (IS_ERR_VALUE(rval))
+		return rval;
+
+	ctrl->cur.val = 0;
+
+	if (flash->fault & ADP1653_REG_FAULT_FLT_SCP)
+		ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
+	if (flash->fault & ADP1653_REG_FAULT_FLT_OT)
+		ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
+	if (flash->fault & ADP1653_REG_FAULT_FLT_TMR)
+		ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT;
+	if (flash->fault & ADP1653_REG_FAULT_FLT_OV)
+		ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
+
+	flash->fault = 0;
+
+	return 0;
+}
+
+static int adp1653_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct adp1653_flash *flash =
+		container_of(ctrl->handler, struct adp1653_flash, ctrls);
+	int rval;
+
+	rval = adp1653_get_fault(flash);
+	if (IS_ERR_VALUE(rval))
+		return rval;
+	if ((rval & (ADP1653_REG_FAULT_FLT_SCP |
+		     ADP1653_REG_FAULT_FLT_OT |
+		     ADP1653_REG_FAULT_FLT_OV)) &&
+	    (ctrl->id == V4L2_CID_FLASH_STROBE ||
+	     ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY ||
+	     ctrl->id == V4L2_CID_FLASH_LED_MODE))
+		return -EBUSY;
+
+	switch (ctrl->id) {
+	case V4L2_CID_FLASH_STROBE:
+		return adp1653_strobe(flash, 1);
+	case V4L2_CID_FLASH_STROBE_STOP:
+		return adp1653_strobe(flash, 0);
+	}
+
+	return adp1653_update_hw(flash);
+}
+
+static const struct v4l2_ctrl_ops adp1653_ctrl_ops = {
+	.g_volatile_ctrl = adp1653_get_ctrl,
+	.s_ctrl = adp1653_set_ctrl,
+};
+
+static int adp1653_init_controls(struct adp1653_flash *flash)
+{
+	struct v4l2_ctrl *fault;
+
+	v4l2_ctrl_handler_init(&flash->ctrls, 9);
+
+	flash->led_mode =
+		v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops,
+				       V4L2_CID_FLASH_LED_MODE,
+				       V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0);
+	v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops,
+			       V4L2_CID_FLASH_STROBE_SOURCE,
+			       V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0);
+	v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+			  V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
+	v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+			  V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
+	flash->flash_timeout =
+		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+				  V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN,
+				  flash->platform_data->max_flash_timeout,
+				  TIMEOUT_STEP,
+				  flash->platform_data->max_flash_timeout);
+	flash->flash_intensity =
+		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+				  V4L2_CID_FLASH_INTENSITY,
+				  ADP1653_FLASH_INTENSITY_MIN,
+				  flash->platform_data->max_flash_intensity,
+				  1, flash->platform_data->max_flash_intensity);
+	flash->torch_intensity =
+		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+				  V4L2_CID_FLASH_TORCH_INTENSITY,
+				  ADP1653_TORCH_INTENSITY_MIN,
+				  flash->platform_data->max_torch_intensity,
+				  ADP1653_FLASH_INTENSITY_STEP,
+				  flash->platform_data->max_torch_intensity);
+	flash->indicator_intensity =
+		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+				  V4L2_CID_FLASH_INDICATOR_INTENSITY,
+				  ADP1653_INDICATOR_INTENSITY_MIN,
+				  flash->platform_data->max_indicator_intensity,
+				  ADP1653_INDICATOR_INTENSITY_STEP,
+				  ADP1653_INDICATOR_INTENSITY_MIN);
+	fault = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+				  V4L2_CID_FLASH_FAULT, 0,
+				  V4L2_FLASH_FAULT_OVER_VOLTAGE
+				  | V4L2_FLASH_FAULT_OVER_TEMPERATURE
+				  | V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0);
+
+	if (flash->ctrls.error)
+		return flash->ctrls.error;
+
+	fault->is_volatile = 1;
+
+	flash->subdev.ctrl_handler = &flash->ctrls;
+	return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static int
+adp1653_init_device(struct adp1653_flash *flash)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+	int rval;
+
+	/* Clear FAULT register by writing zero to OUT_SEL */
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0);
+	if (rval < 0) {
+		dev_err(&client->dev, "failed writing fault register\n");
+		return -EIO;
+	}
+
+	mutex_lock(&flash->ctrls.lock);
+	/* Reset faults before reading new ones. */
+	flash->fault = 0;
+	rval = adp1653_get_fault(flash);
+	mutex_unlock(&flash->ctrls.lock);
+	if (rval > 0) {
+		dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval);
+		return -EIO;
+	}
+
+	mutex_lock(&flash->ctrls.lock);
+	rval = adp1653_update_hw(flash);
+	mutex_unlock(&flash->ctrls.lock);
+	if (rval) {
+		dev_err(&client->dev,
+			"adp1653_update_hw failed at %s\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int
+__adp1653_set_power(struct adp1653_flash *flash, int on)
+{
+	int ret;
+
+	ret = flash->platform_data->power(&flash->subdev, on);
+	if (ret < 0)
+		return ret;
+
+	if (!on)
+		return 0;
+
+	ret = adp1653_init_device(flash);
+	if (ret < 0)
+		flash->platform_data->power(&flash->subdev, 0);
+
+	return ret;
+}
+
+static int
+adp1653_set_power(struct v4l2_subdev *subdev, int on)
+{
+	struct adp1653_flash *flash = to_adp1653_flash(subdev);
+	int ret = 0;
+
+	mutex_lock(&flash->power_lock);
+
+	/* If the power count is modified from 0 to != 0 or from != 0 to 0,
+	 * update the power state.
+	 */
+	if (flash->power_count == !on) {
+		ret = __adp1653_set_power(flash, !!on);
+		if (ret < 0)
+			goto done;
+	}
+
+	/* Update the power count. */
+	flash->power_count += on ? 1 : -1;
+	WARN_ON(flash->power_count < 0);
+
+done:
+	mutex_unlock(&flash->power_lock);
+	return ret;
+}
+
+static int adp1653_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	return adp1653_set_power(sd, 1);
+}
+
+static int adp1653_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	return adp1653_set_power(sd, 0);
+}
+
+static const struct v4l2_subdev_core_ops adp1653_core_ops = {
+	.s_power = adp1653_set_power,
+};
+
+static const struct v4l2_subdev_ops adp1653_ops = {
+	.core = &adp1653_core_ops,
+};
+
+static const struct v4l2_subdev_internal_ops adp1653_internal_ops = {
+	.open = adp1653_open,
+	.close = adp1653_close,
+};
+
+/* --------------------------------------------------------------------------
+ * I2C driver
+ */
+#ifdef CONFIG_PM
+
+static int adp1653_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct adp1653_flash *flash = to_adp1653_flash(subdev);
+
+	if (!flash->power_count)
+		return 0;
+
+	return __adp1653_set_power(flash, 0);
+}
+
+static int adp1653_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct adp1653_flash *flash = to_adp1653_flash(subdev);
+
+	if (!flash->power_count)
+		return 0;
+
+	return __adp1653_set_power(flash, 1);
+}
+
+#else
+
+#define adp1653_suspend	NULL
+#define adp1653_resume	NULL
+
+#endif /* CONFIG_PM */
+
+static int adp1653_probe(struct i2c_client *client,
+			 const struct i2c_device_id *devid)
+{
+	struct adp1653_flash *flash;
+	int ret;
+
+	flash = kzalloc(sizeof(*flash), GFP_KERNEL);
+	if (flash == NULL)
+		return -ENOMEM;
+
+	flash->platform_data = client->dev.platform_data;
+
+	mutex_init(&flash->power_lock);
+
+	v4l2_i2c_subdev_init(&flash->subdev, client, &adp1653_ops);
+	flash->subdev.internal_ops = &adp1653_internal_ops;
+	flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	adp1653_init_controls(flash);
+
+	ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0);
+	if (ret < 0)
+		kfree(flash);
+
+	return ret;
+}
+
+static int __exit adp1653_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct adp1653_flash *flash = to_adp1653_flash(subdev);
+
+	v4l2_device_unregister_subdev(&flash->subdev);
+	v4l2_ctrl_handler_free(&flash->ctrls);
+	media_entity_cleanup(&flash->subdev.entity);
+	kfree(flash);
+	return 0;
+}
+
+static const struct i2c_device_id adp1653_id_table[] = {
+	{ ADP1653_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adp1653_id_table);
+
+static struct dev_pm_ops adp1653_pm_ops = {
+	.suspend	= adp1653_suspend,
+	.resume		= adp1653_resume,
+};
+
+static struct i2c_driver adp1653_i2c_driver = {
+	.driver		= {
+		.name	= ADP1653_NAME,
+		.pm	= &adp1653_pm_ops,
+	},
+	.probe		= adp1653_probe,
+	.remove		= __exit_p(adp1653_remove),
+	.id_table	= adp1653_id_table,
+};
+
+static int __init adp1653_init(void)
+{
+	int rval;
+
+	rval = i2c_add_driver(&adp1653_i2c_driver);
+	if (rval)
+		printk(KERN_ALERT "%s: failed at i2c_add_driver\n", __func__);
+
+	return rval;
+}
+
+static void __exit adp1653_exit(void)
+{
+	i2c_del_driver(&adp1653_i2c_driver);
+}
+
+module_init(adp1653_init);
+module_exit(adp1653_exit);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>");
+MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index f989f28..b6ed44a 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -27,7 +27,6 @@
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
@@ -54,7 +53,7 @@
  */
 #define USE_INT		0	/* Don't modify */
 
-#define VERSION	"0.04"
+#define VERSION	"0.0.5"
 
 #define ar_inl(addr) 		inl((unsigned long)(addr))
 #define ar_outl(val, addr)	outl((unsigned long)(val), (unsigned long)(addr))
@@ -404,7 +403,6 @@ static int ar_querycap(struct file *file, void  *priv,
 	strlcpy(vcap->driver, ar->vdev.name, sizeof(vcap->driver));
 	strlcpy(vcap->card, "Colour AR VGA", sizeof(vcap->card));
 	strlcpy(vcap->bus_info, "Platform", sizeof(vcap->bus_info));
-	vcap->version = KERNEL_VERSION(0, 0, 4);
 	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
@@ -879,3 +877,4 @@ module_exit(ar_cleanup_module);
 MODULE_AUTHOR("Takeo Takahashi <takahashi.takeo@renesas.com>");
 MODULE_DESCRIPTION("Colour AR M64278(VGA) for Video4Linux");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(VERSION);
diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c
new file mode 100644
index 0000000..7b89f00
--- /dev/null
+++ b/drivers/media/video/atmel-isi.c
@@ -0,0 +1,1048 @@
+/*
+ * Copyright (c) 2011 Atmel Corporation
+ * Josh Wu, <josh.wu@atmel.com>
+ *
+ * Based on previous work by Lars Haring, <lars.haring@atmel.com>
+ * and Sedji Gaouaou
+ * Based on the bttv driver for Bt848 with respective copyright holders
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <media/atmel-isi.h>
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
+#include <media/videobuf2-dma-contig.h>
+
+#define MAX_BUFFER_NUM			32
+#define MAX_SUPPORT_WIDTH		2048
+#define MAX_SUPPORT_HEIGHT		2048
+#define VID_LIMIT_BYTES			(16 * 1024 * 1024)
+#define MIN_FRAME_RATE			15
+#define FRAME_INTERVAL_MILLI_SEC	(1000 / MIN_FRAME_RATE)
+
+/* ISI states */
+enum {
+	ISI_STATE_IDLE = 0,
+	ISI_STATE_READY,
+	ISI_STATE_WAIT_SOF,
+};
+
+/* Frame buffer descriptor */
+struct fbd {
+	/* Physical address of the frame buffer */
+	u32 fb_address;
+	/* DMA Control Register(only in HISI2) */
+	u32 dma_ctrl;
+	/* Physical address of the next fbd */
+	u32 next_fbd_address;
+};
+
+static void set_dma_ctrl(struct fbd *fb_desc, u32 ctrl)
+{
+	fb_desc->dma_ctrl = ctrl;
+}
+
+struct isi_dma_desc {
+	struct list_head list;
+	struct fbd *p_fbd;
+	u32 fbd_phys;
+};
+
+/* Frame buffer data */
+struct frame_buffer {
+	struct vb2_buffer vb;
+	struct isi_dma_desc *p_dma_desc;
+	struct list_head list;
+};
+
+struct atmel_isi {
+	/* Protects the access of variables shared with the ISR */
+	spinlock_t			lock;
+	void __iomem			*regs;
+
+	int				sequence;
+	/* State of the ISI module in capturing mode */
+	int				state;
+
+	/* Wait queue for waiting for SOF */
+	wait_queue_head_t		vsync_wq;
+
+	struct vb2_alloc_ctx		*alloc_ctx;
+
+	/* Allocate descriptors for dma buffer use */
+	struct fbd			*p_fb_descriptors;
+	u32				fb_descriptors_phys;
+	struct				list_head dma_desc_head;
+	struct isi_dma_desc		dma_desc[MAX_BUFFER_NUM];
+
+	struct completion		complete;
+	struct clk			*pclk;
+	unsigned int			irq;
+
+	struct isi_platform_data	*pdata;
+
+	struct list_head		video_buffer_list;
+	struct frame_buffer		*active;
+
+	struct soc_camera_device	*icd;
+	struct soc_camera_host		soc_host;
+};
+
+static void isi_writel(struct atmel_isi *isi, u32 reg, u32 val)
+{
+	writel(val, isi->regs + reg);
+}
+static u32 isi_readl(struct atmel_isi *isi, u32 reg)
+{
+	return readl(isi->regs + reg);
+}
+
+static int configure_geometry(struct atmel_isi *isi, u32 width,
+			u32 height, enum v4l2_mbus_pixelcode code)
+{
+	u32 cfg2, cr;
+
+	switch (code) {
+	/* YUV, including grey */
+	case V4L2_MBUS_FMT_Y8_1X8:
+		cr = ISI_CFG2_GRAYSCALE;
+		break;
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		cr = ISI_CFG2_YCC_SWAP_MODE_3;
+		break;
+	case V4L2_MBUS_FMT_VYUY8_2X8:
+		cr = ISI_CFG2_YCC_SWAP_MODE_2;
+		break;
+	case V4L2_MBUS_FMT_YUYV8_2X8:
+		cr = ISI_CFG2_YCC_SWAP_MODE_1;
+		break;
+	case V4L2_MBUS_FMT_YVYU8_2X8:
+		cr = ISI_CFG2_YCC_SWAP_DEFAULT;
+		break;
+	/* RGB, TODO */
+	default:
+		return -EINVAL;
+	}
+
+	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
+
+	cfg2 = isi_readl(isi, ISI_CFG2);
+	cfg2 |= cr;
+	/* Set width */
+	cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK);
+	cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) &
+			ISI_CFG2_IM_HSIZE_MASK;
+	/* Set height */
+	cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK);
+	cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
+			& ISI_CFG2_IM_VSIZE_MASK;
+	isi_writel(isi, ISI_CFG2, cfg2);
+
+	return 0;
+}
+
+static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi)
+{
+	if (isi->active) {
+		struct vb2_buffer *vb = &isi->active->vb;
+		struct frame_buffer *buf = isi->active;
+
+		list_del_init(&buf->list);
+		do_gettimeofday(&vb->v4l2_buf.timestamp);
+		vb->v4l2_buf.sequence = isi->sequence++;
+		vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
+	}
+
+	if (list_empty(&isi->video_buffer_list)) {
+		isi->active = NULL;
+	} else {
+		/* start next dma frame. */
+		isi->active = list_entry(isi->video_buffer_list.next,
+					struct frame_buffer, list);
+		isi_writel(isi, ISI_DMA_C_DSCR,
+			isi->active->p_dma_desc->fbd_phys);
+		isi_writel(isi, ISI_DMA_C_CTRL,
+			ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE);
+		isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH);
+	}
+	return IRQ_HANDLED;
+}
+
+/* ISI interrupt service routine */
+static irqreturn_t isi_interrupt(int irq, void *dev_id)
+{
+	struct atmel_isi *isi = dev_id;
+	u32 status, mask, pending;
+	irqreturn_t ret = IRQ_NONE;
+
+	spin_lock(&isi->lock);
+
+	status = isi_readl(isi, ISI_STATUS);
+	mask = isi_readl(isi, ISI_INTMASK);
+	pending = status & mask;
+
+	if (pending & ISI_CTRL_SRST) {
+		complete(&isi->complete);
+		isi_writel(isi, ISI_INTDIS, ISI_CTRL_SRST);
+		ret = IRQ_HANDLED;
+	} else if (pending & ISI_CTRL_DIS) {
+		complete(&isi->complete);
+		isi_writel(isi, ISI_INTDIS, ISI_CTRL_DIS);
+		ret = IRQ_HANDLED;
+	} else {
+		if ((pending & ISI_SR_VSYNC) &&
+				(isi->state == ISI_STATE_IDLE)) {
+			isi->state = ISI_STATE_READY;
+			wake_up_interruptible(&isi->vsync_wq);
+			ret = IRQ_HANDLED;
+		}
+		if (likely(pending & ISI_SR_CXFR_DONE))
+			ret = atmel_isi_handle_streaming(isi);
+	}
+
+	spin_unlock(&isi->lock);
+	return ret;
+}
+
+#define	WAIT_ISI_RESET		1
+#define	WAIT_ISI_DISABLE	0
+static int atmel_isi_wait_status(struct atmel_isi *isi, int wait_reset)
+{
+	unsigned long timeout;
+	/*
+	 * The reset or disable will only succeed if we have a
+	 * pixel clock from the camera.
+	 */
+	init_completion(&isi->complete);
+
+	if (wait_reset) {
+		isi_writel(isi, ISI_INTEN, ISI_CTRL_SRST);
+		isi_writel(isi, ISI_CTRL, ISI_CTRL_SRST);
+	} else {
+		isi_writel(isi, ISI_INTEN, ISI_CTRL_DIS);
+		isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
+	}
+
+	timeout = wait_for_completion_timeout(&isi->complete,
+			msecs_to_jiffies(100));
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------
+	Videobuf operations
+   ------------------------------------------------------------------*/
+static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+				unsigned int *nplanes, unsigned long sizes[],
+				void *alloc_ctxs[])
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	unsigned long size;
+	int ret, bytes_per_line;
+
+	/* Reset ISI */
+	ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET);
+	if (ret < 0) {
+		dev_err(icd->parent, "Reset ISI timed out\n");
+		return ret;
+	}
+	/* Disable all interrupts */
+	isi_writel(isi, ISI_INTDIS, ~0UL);
+
+	bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+						icd->current_fmt->host_fmt);
+
+	if (bytes_per_line < 0)
+		return bytes_per_line;
+
+	size = bytes_per_line * icd->user_height;
+
+	if (!*nbuffers || *nbuffers > MAX_BUFFER_NUM)
+		*nbuffers = MAX_BUFFER_NUM;
+
+	if (size * *nbuffers > VID_LIMIT_BYTES)
+		*nbuffers = VID_LIMIT_BYTES / size;
+
+	*nplanes = 1;
+	sizes[0] = size;
+	alloc_ctxs[0] = isi->alloc_ctx;
+
+	isi->sequence = 0;
+	isi->active = NULL;
+
+	dev_dbg(icd->parent, "%s, count=%d, size=%ld\n", __func__,
+		*nbuffers, size);
+
+	return 0;
+}
+
+static int buffer_init(struct vb2_buffer *vb)
+{
+	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
+
+	buf->p_dma_desc = NULL;
+	INIT_LIST_HEAD(&buf->list);
+
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
+	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	unsigned long size;
+	struct isi_dma_desc *desc;
+	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+						icd->current_fmt->host_fmt);
+
+	if (bytes_per_line < 0)
+		return bytes_per_line;
+
+	size = bytes_per_line * icd->user_height;
+
+	if (vb2_plane_size(vb, 0) < size) {
+		dev_err(icd->parent, "%s data will not fit into plane (%lu < %lu)\n",
+				__func__, vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+
+	vb2_set_plane_payload(&buf->vb, 0, size);
+
+	if (!buf->p_dma_desc) {
+		if (list_empty(&isi->dma_desc_head)) {
+			dev_err(icd->parent, "Not enough dma descriptors.\n");
+			return -EINVAL;
+		} else {
+			/* Get an available descriptor */
+			desc = list_entry(isi->dma_desc_head.next,
+						struct isi_dma_desc, list);
+			/* Delete the descriptor since now it is used */
+			list_del_init(&desc->list);
+
+			/* Initialize the dma descriptor */
+			desc->p_fbd->fb_address =
+					vb2_dma_contig_plane_paddr(vb, 0);
+			desc->p_fbd->next_fbd_address = 0;
+			set_dma_ctrl(desc->p_fbd, ISI_DMA_CTRL_WB);
+
+			buf->p_dma_desc = desc;
+		}
+	}
+	return 0;
+}
+
+static void buffer_cleanup(struct vb2_buffer *vb)
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
+
+	/* This descriptor is available now and we add to head list */
+	if (buf->p_dma_desc)
+		list_add(&buf->p_dma_desc->list, &isi->dma_desc_head);
+}
+
+static void start_dma(struct atmel_isi *isi, struct frame_buffer *buffer)
+{
+	u32 ctrl, cfg1;
+
+	cfg1 = isi_readl(isi, ISI_CFG1);
+	/* Enable irq: cxfr for the codec path, pxfr for the preview path */
+	isi_writel(isi, ISI_INTEN,
+			ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE);
+
+	/* Check if already in a frame */
+	if (isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) {
+		dev_err(isi->icd->parent, "Already in frame handling.\n");
+		return;
+	}
+
+	isi_writel(isi, ISI_DMA_C_DSCR, buffer->p_dma_desc->fbd_phys);
+	isi_writel(isi, ISI_DMA_C_CTRL, ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE);
+	isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH);
+
+	/* Enable linked list */
+	cfg1 |= isi->pdata->frate | ISI_CFG1_DISCR;
+
+	/* Enable codec path and ISI */
+	ctrl = ISI_CTRL_CDC | ISI_CTRL_EN;
+	isi_writel(isi, ISI_CTRL, ctrl);
+	isi_writel(isi, ISI_CFG1, cfg1);
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&isi->lock, flags);
+	list_add_tail(&buf->list, &isi->video_buffer_list);
+
+	if (isi->active == NULL) {
+		isi->active = buf;
+		start_dma(isi, buf);
+	}
+	spin_unlock_irqrestore(&isi->lock, flags);
+}
+
+static int start_streaming(struct vb2_queue *vq)
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+
+	u32 sr = 0;
+	int ret;
+
+	spin_lock_irq(&isi->lock);
+	isi->state = ISI_STATE_IDLE;
+	/* Clear any pending SOF interrupt */
+	sr = isi_readl(isi, ISI_STATUS);
+	/* Enable VSYNC interrupt for SOF */
+	isi_writel(isi, ISI_INTEN, ISI_SR_VSYNC);
+	isi_writel(isi, ISI_CTRL, ISI_CTRL_EN);
+	spin_unlock_irq(&isi->lock);
+
+	dev_dbg(icd->parent, "Waiting for SOF\n");
+	ret = wait_event_interruptible(isi->vsync_wq,
+				       isi->state != ISI_STATE_IDLE);
+	if (ret)
+		return ret;
+
+	if (isi->state != ISI_STATE_READY)
+		return -EIO;
+
+	spin_lock_irq(&isi->lock);
+	isi->state = ISI_STATE_WAIT_SOF;
+	isi_writel(isi, ISI_INTDIS, ISI_SR_VSYNC);
+	spin_unlock_irq(&isi->lock);
+
+	return 0;
+}
+
+/* abort streaming and wait for last buffer */
+static int stop_streaming(struct vb2_queue *vq)
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	struct frame_buffer *buf, *node;
+	int ret = 0;
+	unsigned long timeout;
+
+	spin_lock_irq(&isi->lock);
+	isi->active = NULL;
+	/* Release all active buffers */
+	list_for_each_entry_safe(buf, node, &isi->video_buffer_list, list) {
+		list_del_init(&buf->list);
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irq(&isi->lock);
+
+	timeout = jiffies + FRAME_INTERVAL_MILLI_SEC * HZ;
+	/* Wait until the end of the current frame. */
+	while ((isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) &&
+			time_before(jiffies, timeout))
+		msleep(1);
+
+	if (time_after(jiffies, timeout)) {
+		dev_err(icd->parent,
+			"Timeout waiting for finishing codec request\n");
+		return -ETIMEDOUT;
+	}
+
+	/* Disable interrupts */
+	isi_writel(isi, ISI_INTDIS,
+			ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE);
+
+	/* Disable ISI and wait for it is done */
+	ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE);
+	if (ret < 0)
+		dev_err(icd->parent, "Disable ISI timed out\n");
+
+	return ret;
+}
+
+static struct vb2_ops isi_video_qops = {
+	.queue_setup		= queue_setup,
+	.buf_init		= buffer_init,
+	.buf_prepare		= buffer_prepare,
+	.buf_cleanup		= buffer_cleanup,
+	.buf_queue		= buffer_queue,
+	.start_streaming	= start_streaming,
+	.stop_streaming		= stop_streaming,
+	.wait_prepare		= soc_camera_unlock,
+	.wait_finish		= soc_camera_lock,
+};
+
+/* ------------------------------------------------------------------
+	SOC camera operations for the device
+   ------------------------------------------------------------------*/
+static int isi_camera_init_videobuf(struct vb2_queue *q,
+				     struct soc_camera_device *icd)
+{
+	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	q->io_modes = VB2_MMAP;
+	q->drv_priv = icd;
+	q->buf_struct_size = sizeof(struct frame_buffer);
+	q->ops = &isi_video_qops;
+	q->mem_ops = &vb2_dma_contig_memops;
+
+	return vb2_queue_init(q);
+}
+
+static int isi_camera_set_fmt(struct soc_camera_device *icd,
+			      struct v4l2_format *f)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	const struct soc_camera_format_xlate *xlate;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct v4l2_mbus_framefmt mf;
+	int ret;
+
+	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
+	if (!xlate) {
+		dev_warn(icd->parent, "Format %x not found\n",
+			 pix->pixelformat);
+		return -EINVAL;
+	}
+
+	dev_dbg(icd->parent, "Plan to set format %dx%d\n",
+			pix->width, pix->height);
+
+	mf.width	= pix->width;
+	mf.height	= pix->height;
+	mf.field	= pix->field;
+	mf.colorspace	= pix->colorspace;
+	mf.code		= xlate->code;
+
+	ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf);
+	if (ret < 0)
+		return ret;
+
+	if (mf.code != xlate->code)
+		return -EINVAL;
+
+	ret = configure_geometry(isi, pix->width, pix->height, xlate->code);
+	if (ret < 0)
+		return ret;
+
+	pix->width		= mf.width;
+	pix->height		= mf.height;
+	pix->field		= mf.field;
+	pix->colorspace		= mf.colorspace;
+	icd->current_fmt	= xlate;
+
+	dev_dbg(icd->parent, "Finally set format %dx%d\n",
+		pix->width, pix->height);
+
+	return ret;
+}
+
+static int isi_camera_try_fmt(struct soc_camera_device *icd,
+			      struct v4l2_format *f)
+{
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	const struct soc_camera_format_xlate *xlate;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct v4l2_mbus_framefmt mf;
+	u32 pixfmt = pix->pixelformat;
+	int ret;
+
+	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+	if (pixfmt && !xlate) {
+		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
+		return -EINVAL;
+	}
+
+	/* limit to Atmel ISI hardware capabilities */
+	if (pix->height > MAX_SUPPORT_HEIGHT)
+		pix->height = MAX_SUPPORT_HEIGHT;
+	if (pix->width > MAX_SUPPORT_WIDTH)
+		pix->width = MAX_SUPPORT_WIDTH;
+
+	/* limit to sensor capabilities */
+	mf.width	= pix->width;
+	mf.height	= pix->height;
+	mf.field	= pix->field;
+	mf.colorspace	= pix->colorspace;
+	mf.code		= xlate->code;
+
+	ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
+	if (ret < 0)
+		return ret;
+
+	pix->width	= mf.width;
+	pix->height	= mf.height;
+	pix->colorspace	= mf.colorspace;
+
+	switch (mf.field) {
+	case V4L2_FIELD_ANY:
+		pix->field = V4L2_FIELD_NONE;
+		break;
+	case V4L2_FIELD_NONE:
+		break;
+	default:
+		dev_err(icd->parent, "Field type %d unsupported.\n",
+			mf.field);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct soc_mbus_pixelfmt isi_camera_formats[] = {
+	{
+		.fourcc			= V4L2_PIX_FMT_YUYV,
+		.name			= "Packed YUV422 16 bit",
+		.bits_per_sample	= 8,
+		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
+		.order			= SOC_MBUS_ORDER_LE,
+	},
+};
+
+/* This will be corrected as we get more formats */
+static bool isi_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt)
+{
+	return	fmt->packing == SOC_MBUS_PACKING_NONE ||
+		(fmt->bits_per_sample == 8 &&
+		 fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) ||
+		(fmt->bits_per_sample > 8 &&
+		 fmt->packing == SOC_MBUS_PACKING_EXTEND16);
+}
+
+static unsigned long make_bus_param(struct atmel_isi *isi)
+{
+	unsigned long flags;
+	/*
+	 * Platform specified synchronization and pixel clock polarities are
+	 * only a recommendation and are only used during probing. Atmel ISI
+	 * camera interface only works in master mode, i.e., uses HSYNC and
+	 * VSYNC signals from the sensor
+	 */
+	flags = SOCAM_MASTER |
+		SOCAM_HSYNC_ACTIVE_HIGH |
+		SOCAM_HSYNC_ACTIVE_LOW |
+		SOCAM_VSYNC_ACTIVE_HIGH |
+		SOCAM_VSYNC_ACTIVE_LOW |
+		SOCAM_PCLK_SAMPLE_RISING |
+		SOCAM_PCLK_SAMPLE_FALLING |
+		SOCAM_DATA_ACTIVE_HIGH;
+
+	if (isi->pdata->data_width_flags & ISI_DATAWIDTH_10)
+		flags |= SOCAM_DATAWIDTH_10;
+
+	if (isi->pdata->data_width_flags & ISI_DATAWIDTH_8)
+		flags |= SOCAM_DATAWIDTH_8;
+
+	if (flags & SOCAM_DATAWIDTH_MASK)
+		return flags;
+
+	return 0;
+}
+
+static int isi_camera_try_bus_param(struct soc_camera_device *icd,
+				    unsigned char buswidth)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	unsigned long camera_flags;
+	int ret;
+
+	camera_flags = icd->ops->query_bus_param(icd);
+	ret = soc_camera_bus_param_compatible(camera_flags,
+					make_bus_param(isi));
+	if (!ret)
+		return -EINVAL;
+	return 0;
+}
+
+
+static int isi_camera_get_formats(struct soc_camera_device *icd,
+				  unsigned int idx,
+				  struct soc_camera_format_xlate *xlate)
+{
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	int formats = 0, ret;
+	/* sensor format */
+	enum v4l2_mbus_pixelcode code;
+	/* soc camera host format */
+	const struct soc_mbus_pixelfmt *fmt;
+
+	ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code);
+	if (ret < 0)
+		/* No more formats */
+		return 0;
+
+	fmt = soc_mbus_get_fmtdesc(code);
+	if (!fmt) {
+		dev_err(icd->parent,
+			"Invalid format code #%u: %d\n", idx, code);
+		return 0;
+	}
+
+	/* This also checks support for the requested bits-per-sample */
+	ret = isi_camera_try_bus_param(icd, fmt->bits_per_sample);
+	if (ret < 0) {
+		dev_err(icd->parent,
+			"Fail to try the bus parameters.\n");
+		return 0;
+	}
+
+	switch (code) {
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+	case V4L2_MBUS_FMT_VYUY8_2X8:
+	case V4L2_MBUS_FMT_YUYV8_2X8:
+	case V4L2_MBUS_FMT_YVYU8_2X8:
+		formats++;
+		if (xlate) {
+			xlate->host_fmt	= &isi_camera_formats[0];
+			xlate->code	= code;
+			xlate++;
+			dev_dbg(icd->parent, "Providing format %s using code %d\n",
+				isi_camera_formats[0].name, code);
+		}
+		break;
+	default:
+		if (!isi_camera_packing_supported(fmt))
+			return 0;
+		if (xlate)
+			dev_dbg(icd->parent,
+				"Providing format %s in pass-through mode\n",
+				fmt->name);
+	}
+
+	/* Generic pass-through */
+	formats++;
+	if (xlate) {
+		xlate->host_fmt	= fmt;
+		xlate->code	= code;
+		xlate++;
+	}
+
+	return formats;
+}
+
+/* Called with .video_lock held */
+static int isi_camera_add_device(struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	int ret;
+
+	if (isi->icd)
+		return -EBUSY;
+
+	ret = clk_enable(isi->pclk);
+	if (ret)
+		return ret;
+
+	isi->icd = icd;
+	dev_dbg(icd->parent, "Atmel ISI Camera driver attached to camera %d\n",
+		 icd->devnum);
+	return 0;
+}
+/* Called with .video_lock held */
+static void isi_camera_remove_device(struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+
+	BUG_ON(icd != isi->icd);
+
+	clk_disable(isi->pclk);
+	isi->icd = NULL;
+
+	dev_dbg(icd->parent, "Atmel ISI Camera driver detached from camera %d\n",
+		 icd->devnum);
+}
+
+static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
+{
+	struct soc_camera_device *icd = file->private_data;
+
+	return vb2_poll(&icd->vb2_vidq, file, pt);
+}
+
+static int isi_camera_querycap(struct soc_camera_host *ici,
+			       struct v4l2_capability *cap)
+{
+	strcpy(cap->driver, "atmel-isi");
+	strcpy(cap->card, "Atmel Image Sensor Interface");
+	cap->capabilities = (V4L2_CAP_VIDEO_CAPTURE |
+				V4L2_CAP_STREAMING);
+	return 0;
+}
+
+static int isi_camera_set_bus_param(struct soc_camera_device *icd, u32 pixfmt)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	unsigned long bus_flags, camera_flags, common_flags;
+	int ret;
+	u32 cfg1 = 0;
+
+	camera_flags = icd->ops->query_bus_param(icd);
+
+	bus_flags = make_bus_param(isi);
+	common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
+	dev_dbg(icd->parent, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
+		camera_flags, bus_flags, common_flags);
+	if (!common_flags)
+		return -EINVAL;
+
+	/* Make choises, based on platform preferences */
+	if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
+	    (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+		if (isi->pdata->hsync_act_low)
+			common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+		else
+			common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+	}
+
+	if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
+	    (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+		if (isi->pdata->vsync_act_low)
+			common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+		else
+			common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+	}
+
+	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
+	    (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+		if (isi->pdata->pclk_act_falling)
+			common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+		else
+			common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+	}
+
+	ret = icd->ops->set_bus_param(icd, common_flags);
+	if (ret < 0) {
+		dev_dbg(icd->parent, "Camera set_bus_param(%lx) returned %d\n",
+			common_flags, ret);
+		return ret;
+	}
+
+	/* set bus param for ISI */
+	if (common_flags & SOCAM_HSYNC_ACTIVE_LOW)
+		cfg1 |= ISI_CFG1_HSYNC_POL_ACTIVE_LOW;
+	if (common_flags & SOCAM_VSYNC_ACTIVE_LOW)
+		cfg1 |= ISI_CFG1_VSYNC_POL_ACTIVE_LOW;
+	if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+		cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING;
+
+	if (isi->pdata->has_emb_sync)
+		cfg1 |= ISI_CFG1_EMB_SYNC;
+	if (isi->pdata->isi_full_mode)
+		cfg1 |= ISI_CFG1_FULL_MODE;
+
+	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
+	isi_writel(isi, ISI_CFG1, cfg1);
+
+	return 0;
+}
+
+static struct soc_camera_host_ops isi_soc_camera_host_ops = {
+	.owner		= THIS_MODULE,
+	.add		= isi_camera_add_device,
+	.remove		= isi_camera_remove_device,
+	.set_fmt	= isi_camera_set_fmt,
+	.try_fmt	= isi_camera_try_fmt,
+	.get_formats	= isi_camera_get_formats,
+	.init_videobuf2	= isi_camera_init_videobuf,
+	.poll		= isi_camera_poll,
+	.querycap	= isi_camera_querycap,
+	.set_bus_param	= isi_camera_set_bus_param,
+};
+
+/* -----------------------------------------------------------------------*/
+static int __devexit atmel_isi_remove(struct platform_device *pdev)
+{
+	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
+	struct atmel_isi *isi = container_of(soc_host,
+					struct atmel_isi, soc_host);
+
+	free_irq(isi->irq, isi);
+	soc_camera_host_unregister(soc_host);
+	vb2_dma_contig_cleanup_ctx(isi->alloc_ctx);
+	dma_free_coherent(&pdev->dev,
+			sizeof(struct fbd) * MAX_BUFFER_NUM,
+			isi->p_fb_descriptors,
+			isi->fb_descriptors_phys);
+
+	iounmap(isi->regs);
+	clk_put(isi->pclk);
+	kfree(isi);
+
+	return 0;
+}
+
+static int __devinit atmel_isi_probe(struct platform_device *pdev)
+{
+	unsigned int irq;
+	struct atmel_isi *isi;
+	struct clk *pclk;
+	struct resource *regs;
+	int ret, i;
+	struct device *dev = &pdev->dev;
+	struct soc_camera_host *soc_host;
+	struct isi_platform_data *pdata;
+
+	pdata = dev->platform_data;
+	if (!pdata || !pdata->data_width_flags) {
+		dev_err(&pdev->dev,
+			"No config available for Atmel ISI\n");
+		return -EINVAL;
+	}
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
+	pclk = clk_get(&pdev->dev, "isi_clk");
+	if (IS_ERR(pclk))
+		return PTR_ERR(pclk);
+
+	isi = kzalloc(sizeof(struct atmel_isi), GFP_KERNEL);
+	if (!isi) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "Can't allocate interface!\n");
+		goto err_alloc_isi;
+	}
+
+	isi->pclk = pclk;
+	isi->pdata = pdata;
+	isi->active = NULL;
+	spin_lock_init(&isi->lock);
+	init_waitqueue_head(&isi->vsync_wq);
+	INIT_LIST_HEAD(&isi->video_buffer_list);
+	INIT_LIST_HEAD(&isi->dma_desc_head);
+
+	isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
+				sizeof(struct fbd) * MAX_BUFFER_NUM,
+				&isi->fb_descriptors_phys,
+				GFP_KERNEL);
+	if (!isi->p_fb_descriptors) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "Can't allocate descriptors!\n");
+		goto err_alloc_descriptors;
+	}
+
+	for (i = 0; i < MAX_BUFFER_NUM; i++) {
+		isi->dma_desc[i].p_fbd = isi->p_fb_descriptors + i;
+		isi->dma_desc[i].fbd_phys = isi->fb_descriptors_phys +
+					i * sizeof(struct fbd);
+		list_add(&isi->dma_desc[i].list, &isi->dma_desc_head);
+	}
+
+	isi->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
+	if (IS_ERR(isi->alloc_ctx)) {
+		ret = PTR_ERR(isi->alloc_ctx);
+		goto err_alloc_ctx;
+	}
+
+	isi->regs = ioremap(regs->start, resource_size(regs));
+	if (!isi->regs) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto err_req_irq;
+	}
+
+	ret = request_irq(irq, isi_interrupt, 0, "isi", isi);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
+		goto err_req_irq;
+	}
+	isi->irq = irq;
+
+	soc_host		= &isi->soc_host;
+	soc_host->drv_name	= "isi-camera";
+	soc_host->ops		= &isi_soc_camera_host_ops;
+	soc_host->priv		= isi;
+	soc_host->v4l2_dev.dev	= &pdev->dev;
+	soc_host->nr		= pdev->id;
+
+	ret = soc_camera_host_register(soc_host);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to register soc camera host\n");
+		goto err_register_soc_camera_host;
+	}
+	return 0;
+
+err_register_soc_camera_host:
+	free_irq(isi->irq, isi);
+err_req_irq:
+	iounmap(isi->regs);
+err_ioremap:
+	vb2_dma_contig_cleanup_ctx(isi->alloc_ctx);
+err_alloc_ctx:
+	dma_free_coherent(&pdev->dev,
+			sizeof(struct fbd) * MAX_BUFFER_NUM,
+			isi->p_fb_descriptors,
+			isi->fb_descriptors_phys);
+err_alloc_descriptors:
+	kfree(isi);
+err_alloc_isi:
+	clk_put(isi->pclk);
+
+	return ret;
+}
+
+static struct platform_driver atmel_isi_driver = {
+	.probe		= atmel_isi_probe,
+	.remove		= __devexit_p(atmel_isi_remove),
+	.driver		= {
+		.name = "atmel_isi",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init atmel_isi_init_module(void)
+{
+	return  platform_driver_probe(&atmel_isi_driver, &atmel_isi_probe);
+}
+
+static void __exit atmel_isi_exit(void)
+{
+	platform_driver_unregister(&atmel_isi_driver);
+}
+module_init(atmel_isi_init_module);
+module_exit(atmel_isi_exit);
+
+MODULE_AUTHOR("Josh Wu <josh.wu@atmel.com>");
+MODULE_DESCRIPTION("The V4L2 driver for Atmel Linux");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("video");
diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c
index ca342e4..1e4ce506 100644
--- a/drivers/media/video/au0828/au0828-core.c
+++ b/drivers/media/video/au0828/au0828-core.c
@@ -292,3 +292,4 @@ module_exit(au0828_exit);
 MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products");
 MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.2");
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index c03eb29..0b3e481 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -33,7 +33,6 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/suspend.h>
-#include <linux/version.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-chip-ident.h>
@@ -43,8 +42,6 @@
 
 static DEFINE_MUTEX(au0828_sysfs_lock);
 
-#define AU0828_VERSION_CODE KERNEL_VERSION(0, 0, 1)
-
 /* ------------------------------------------------------------------
 	Videobuf operations
    ------------------------------------------------------------------*/
@@ -1254,8 +1251,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, dev->board.name, sizeof(cap->card));
 	strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info));
 
-	cap->version = AU0828_VERSION_CODE;
-
 	/*set the device capabilities */
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_VBI_CAPTURE |
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 3c9e6c7..5b15f63 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -2892,13 +2892,10 @@ void __devinit bttv_idcard(struct bttv *btv)
 {
 	unsigned int gpiobits;
 	int i,type;
-	unsigned short tmp;
 
 	/* read PCI subsystem ID */
-	pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
-	btv->cardid = tmp << 16;
-	pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
-	btv->cardid |= tmp;
+	btv->cardid  = btv->c.pci->subsystem_device << 16;
+	btv->cardid |= btv->c.pci->subsystem_vendor;
 
 	if (0 != btv->cardid && 0xffffffff != btv->cardid) {
 		/* look for the card */
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 834a483..14444de 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -57,6 +57,7 @@
 
 #include <media/saa6588.h>
 
+#define BTTV_VERSION "0.9.19"
 
 unsigned int bttv_num;			/* number of Bt848s in use */
 struct bttv *bttvs[BTTV_MAX];
@@ -163,6 +164,7 @@ MODULE_PARM_DESC(radio_nr, "radio device numbers");
 MODULE_DESCRIPTION("bttv - v4l/v4l2 driver module for bt848/878 based cards");
 MODULE_AUTHOR("Ralph Metzler & Marcus Metzler & Gerd Knorr");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(BTTV_VERSION);
 
 /* ----------------------------------------------------------------------- */
 /* sysfs                                                                   */
@@ -2616,7 +2618,6 @@ static int bttv_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, btv->video_dev->name, sizeof(cap->card));
 	snprintf(cap->bus_info, sizeof(cap->bus_info),
 		 "PCI:%s", pci_name(btv->c.pci));
-	cap->version = BTTV_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_VBI_CAPTURE |
@@ -3416,7 +3417,6 @@ static int radio_querycap(struct file *file, void *priv,
 	strcpy(cap->driver, "bttv");
 	strlcpy(cap->card, btv->radio_dev->name, sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(btv->c.pci));
-	cap->version = BTTV_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_TUNER;
 
 	return 0;
@@ -4585,14 +4585,8 @@ static int __init bttv_init_module(void)
 
 	bttv_num = 0;
 
-	printk(KERN_INFO "bttv: driver version %d.%d.%d loaded\n",
-	       (BTTV_VERSION_CODE >> 16) & 0xff,
-	       (BTTV_VERSION_CODE >> 8) & 0xff,
-	       BTTV_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "bttv: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "bttv: driver version %s loaded\n",
+	       BTTV_VERSION);
 	if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME)
 		gbuffers = 2;
 	if (gbufsize > BTTV_MAX_FBUF)
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 9b776fa..318edf2 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -25,9 +25,6 @@
 #ifndef _BTTVP_H_
 #define _BTTVP_H_
 
-#include <linux/version.h>
-#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,18)
-
 #include <linux/types.h>
 #include <linux/wait.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index c119350..f09df9d 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -71,7 +71,6 @@ OTHER DEALINGS IN THE SOFTWARE.
 #include <linux/mm.h>
 #include <linux/parport.h>
 #include <linux/sched.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
@@ -647,7 +646,6 @@ static int qcam_querycap(struct file *file, void  *priv,
 	strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
 	strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card));
 	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
-	vcap->version = KERNEL_VERSION(0, 0, 2);
 	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
@@ -895,6 +893,7 @@ static struct qcam *qcam_init(struct parport *port)
 
 	if (v4l2_device_register(NULL, v4l2_dev) < 0) {
 		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+		kfree(qcam);
 		return NULL;
 	}
 
@@ -1092,3 +1091,4 @@ module_init(init_bw_qcams);
 module_exit(exit_bw_qcams);
 
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index 24fc009..cd8ff04 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -35,7 +35,6 @@
 #include <linux/sched.h>
 #include <linux/mutex.h>
 #include <linux/jiffies.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <asm/uaccess.h>
 #include <media/v4l2-device.h>
@@ -517,7 +516,6 @@ static int qcam_querycap(struct file *file, void  *priv,
 	strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
 	strlcpy(vcap->card, "Color Quickcam", sizeof(vcap->card));
 	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
-	vcap->version = KERNEL_VERSION(0, 0, 3);
 	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
@@ -752,6 +750,7 @@ static struct qcam *qcam_init(struct parport *port)
 
 	if (v4l2_device_register(NULL, v4l2_dev) < 0) {
 		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+		kfree(qcam);
 		return NULL;
 	}
 
@@ -886,6 +885,7 @@ static void __exit cqcam_cleanup(void)
 MODULE_AUTHOR("Philip Blundell <philb@gnu.org>");
 MODULE_DESCRIPTION(BANNER);
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.4");
 
 module_init(cqcam_init);
 module_exit(cqcam_cleanup);
diff --git a/drivers/media/video/cafe_ccic-regs.h b/drivers/media/video/cafe_ccic-regs.h
deleted file mode 100644
index 8e2a87c..0000000
--- a/drivers/media/video/cafe_ccic-regs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Register definitions for the m88alp01 camera interface.  Offsets in bytes
- * as given in the spec.
- *
- * Copyright 2006 One Laptop Per Child Association, Inc.
- *
- * Written by Jonathan Corbet, corbet@lwn.net.
- *
- * This file may be distributed under the terms of the GNU General
- * Public License, version 2.
- */
-#define REG_Y0BAR	0x00
-#define REG_Y1BAR	0x04
-#define REG_Y2BAR	0x08
-/* ... */
-
-#define REG_IMGPITCH	0x24	/* Image pitch register */
-#define   IMGP_YP_SHFT	  2		/* Y pitch params */
-#define   IMGP_YP_MASK	  0x00003ffc	/* Y pitch field */
-#define	  IMGP_UVP_SHFT	  18		/* UV pitch (planar) */
-#define   IMGP_UVP_MASK   0x3ffc0000
-#define REG_IRQSTATRAW	0x28	/* RAW IRQ Status */
-#define   IRQ_EOF0	  0x00000001	/* End of frame 0 */
-#define   IRQ_EOF1	  0x00000002	/* End of frame 1 */
-#define   IRQ_EOF2	  0x00000004	/* End of frame 2 */
-#define   IRQ_SOF0	  0x00000008	/* Start of frame 0 */
-#define   IRQ_SOF1	  0x00000010	/* Start of frame 1 */
-#define   IRQ_SOF2	  0x00000020	/* Start of frame 2 */
-#define   IRQ_OVERFLOW	  0x00000040	/* FIFO overflow */
-#define   IRQ_TWSIW	  0x00010000	/* TWSI (smbus) write */
-#define   IRQ_TWSIR	  0x00020000	/* TWSI read */
-#define   IRQ_TWSIE	  0x00040000	/* TWSI error */
-#define   TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE)
-#define   FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2)
-#define   ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW)
-#define REG_IRQMASK	0x2c	/* IRQ mask - same bits as IRQSTAT */
-#define REG_IRQSTAT	0x30	/* IRQ status / clear */
-
-#define REG_IMGSIZE	0x34	/* Image size */
-#define  IMGSZ_V_MASK	  0x1fff0000
-#define  IMGSZ_V_SHIFT	  16
-#define	 IMGSZ_H_MASK	  0x00003fff
-#define REG_IMGOFFSET	0x38	/* IMage offset */
-
-#define REG_CTRL0	0x3c	/* Control 0 */
-#define   C0_ENABLE	  0x00000001	/* Makes the whole thing go */
-
-/* Mask for all the format bits */
-#define   C0_DF_MASK	  0x00fffffc    /* Bits 2-23 */
-
-/* RGB ordering */
-#define   C0_RGB4_RGBX	  0x00000000
-#define	  C0_RGB4_XRGB	  0x00000004
-#define	  C0_RGB4_BGRX	  0x00000008
-#define   C0_RGB4_XBGR	  0x0000000c
-#define   C0_RGB5_RGGB	  0x00000000
-#define	  C0_RGB5_GRBG	  0x00000004
-#define	  C0_RGB5_GBRG	  0x00000008
-#define   C0_RGB5_BGGR	  0x0000000c
-
-/* Spec has two fields for DIN and DOUT, but they must match, so
-   combine them here. */
-#define   C0_DF_YUV	  0x00000000    /* Data is YUV	    */
-#define   C0_DF_RGB	  0x000000a0	/* ... RGB		    */
-#define   C0_DF_BAYER     0x00000140	/* ... Bayer                */
-/* 8-8-8 must be missing from the below - ask */
-#define   C0_RGBF_565	  0x00000000
-#define   C0_RGBF_444	  0x00000800
-#define   C0_RGB_BGR	  0x00001000	/* Blue comes first */
-#define   C0_YUV_PLANAR	  0x00000000	/* YUV 422 planar format */
-#define   C0_YUV_PACKED	  0x00008000	/* YUV 422 packed	*/
-#define   C0_YUV_420PL	  0x0000a000	/* YUV 420 planar	*/
-/* Think that 420 packed must be 111 - ask */
-#define	  C0_YUVE_YUYV	  0x00000000	/* Y1CbY0Cr 		*/
-#define	  C0_YUVE_YVYU	  0x00010000	/* Y1CrY0Cb 		*/
-#define	  C0_YUVE_VYUY	  0x00020000	/* CrY1CbY0 		*/
-#define	  C0_YUVE_UYVY	  0x00030000	/* CbY1CrY0 		*/
-#define   C0_YUVE_XYUV	  0x00000000    /* 420: .YUV		*/
-#define	  C0_YUVE_XYVU	  0x00010000	/* 420: .YVU 		*/
-#define	  C0_YUVE_XUVY	  0x00020000	/* 420: .UVY 		*/
-#define	  C0_YUVE_XVUY	  0x00030000	/* 420: .VUY 		*/
-/* Bayer bits 18,19 if needed */
-#define   C0_HPOL_LOW	  0x01000000	/* HSYNC polarity active low */
-#define   C0_VPOL_LOW	  0x02000000	/* VSYNC polarity active low */
-#define   C0_VCLK_LOW	  0x04000000	/* VCLK on falling edge */
-#define   C0_DOWNSCALE	  0x08000000	/* Enable downscaler */
-#define	  C0_SIFM_MASK	  0xc0000000	/* SIF mode bits */
-#define   C0_SIF_HVSYNC	  0x00000000	/* Use H/VSYNC */
-#define   CO_SOF_NOSYNC	  0x40000000	/* Use inband active signaling */
-
-
-#define REG_CTRL1	0x40	/* Control 1 */
-#define   C1_444ALPHA	  0x00f00000	/* Alpha field in RGB444 */
-#define   C1_ALPHA_SHFT	  20
-#define   C1_DMAB32	  0x00000000	/* 32-byte DMA burst */
-#define   C1_DMAB16	  0x02000000	/* 16-byte DMA burst */
-#define	  C1_DMAB64	  0x04000000	/* 64-byte DMA burst */
-#define	  C1_DMAB_MASK	  0x06000000
-#define   C1_TWOBUFS	  0x08000000	/* Use only two DMA buffers */
-#define   C1_PWRDWN	  0x10000000	/* Power down */
-
-#define REG_CLKCTRL	0x88	/* Clock control */
-#define   CLK_DIV_MASK	  0x0000ffff	/* Upper bits RW "reserved" */
-
-#define REG_GPR		0xb4	/* General purpose register.  This
-				   controls inputs to the power and reset
-				   pins on the OV7670 used with OLPC;
-				   other deployments could differ.  */
-#define   GPR_C1EN	  0x00000020	/* Pad 1 (power down) enable */
-#define   GPR_C0EN	  0x00000010	/* Pad 0 (reset) enable */
-#define	  GPR_C1	  0x00000002	/* Control 1 value */
-/*
- * Control 0 is wired to reset on OLPC machines.  For ov7x sensors,
- * it is active low, for 0v6x, instead, it's active high.  What
- * fun.
- */
-#define   GPR_C0	  0x00000001	/* Control 0 value */
-
-#define REG_TWSIC0	0xb8	/* TWSI (smbus) control 0 */
-#define   TWSIC0_EN       0x00000001	/* TWSI enable */
-#define   TWSIC0_MODE	  0x00000002	/* 1 = 16-bit, 0 = 8-bit */
-#define   TWSIC0_SID	  0x000003fc	/* Slave ID */
-#define   TWSIC0_SID_SHIFT 2
-#define   TWSIC0_CLKDIV   0x0007fc00	/* Clock divider */
-#define   TWSIC0_MASKACK  0x00400000	/* Mask ack from sensor */
-#define   TWSIC0_OVMAGIC  0x00800000	/* Make it work on OV sensors */
-
-#define REG_TWSIC1	0xbc	/* TWSI control 1 */
-#define   TWSIC1_DATA	  0x0000ffff	/* Data to/from camchip */
-#define   TWSIC1_ADDR	  0x00ff0000	/* Address (register) */
-#define   TWSIC1_ADDR_SHIFT 16
-#define   TWSIC1_READ	  0x01000000	/* Set for read op */
-#define   TWSIC1_WSTAT	  0x02000000	/* Write status */
-#define   TWSIC1_RVALID	  0x04000000	/* Read data valid */
-#define   TWSIC1_ERROR	  0x08000000	/* Something screwed up */
-
-
-#define REG_UBAR	0xc4	/* Upper base address register */
-
-/*
- * Here's the weird global control registers which are said to live
- * way up here.
- */
-#define REG_GL_CSR     0x3004  /* Control/status register */
-#define   GCSR_SRS	 0x00000001	/* SW Reset set */
-#define   GCSR_SRC  	 0x00000002	/* SW Reset clear */
-#define	  GCSR_MRS	 0x00000004	/* Master reset set */
-#define	  GCSR_MRC	 0x00000008	/* HW Reset clear */
-#define   GCSR_CCIC_EN   0x00004000    /* CCIC Clock enable */
-#define REG_GL_IMASK   0x300c  /* Interrupt mask register */
-#define   GIMSK_CCIC_EN          0x00000004    /* CCIC Interrupt enable */
-
-#define REG_GL_FCR	0x3038  /* GPIO functional control register */
-#define	  GFCR_GPIO_ON	  0x08		/* Camera GPIO enabled */
-#define REG_GL_GPIOR	0x315c	/* GPIO register */
-#define   GGPIO_OUT  		0x80000	/* GPIO output */
-#define   GGPIO_VAL  		0x00008	/* Output pin value */
-
-#define REG_LEN                REG_GL_IMASK + 4
-
-
-/*
- * Useful stuff that probably belongs somewhere global.
- */
-#define VGA_WIDTH	640
-#define VGA_HEIGHT	480
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
deleted file mode 100644
index 6647033..0000000
--- a/drivers/media/video/cafe_ccic.c
+++ /dev/null
@@ -1,2267 +0,0 @@
-/*
- * A driver for the CMOS camera controller in the Marvell 88ALP01 "cafe"
- * multifunction chip.  Currently works with the Omnivision OV7670
- * sensor.
- *
- * The data sheet for this device can be found at:
- *    http://www.marvell.com/products/pc_connectivity/88alp01/ 
- *
- * Copyright 2006 One Laptop Per Child Association, Inc.
- * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
- *
- * Written by Jonathan Corbet, corbet@lwn.net.
- *
- * v4l2_device/v4l2_subdev conversion by:
- * Copyright (C) 2009 Hans Verkuil <hverkuil@xs4all.nl>
- *
- * Note: this conversion is untested! Please contact the linux-media
- * mailinglist if you can test this, together with the test results.
- *
- * This file may be distributed under the terms of the GNU General
- * Public License, version 2.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/dmi.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-chip-ident.h>
-#include <linux/device.h>
-#include <linux/wait.h>
-#include <linux/list.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/vmalloc.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#include "ov7670.h"
-#include "cafe_ccic-regs.h"
-
-#define CAFE_VERSION 0x000002
-
-
-/*
- * Parameters.
- */
-MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
-MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("Video");
-
-/*
- * Internal DMA buffer management.  Since the controller cannot do S/G I/O,
- * we must have physically contiguous buffers to bring frames into.
- * These parameters control how many buffers we use, whether we
- * allocate them at load time (better chance of success, but nails down
- * memory) or when somebody tries to use the camera (riskier), and,
- * for load-time allocation, how big they should be.
- *
- * The controller can cycle through three buffers.  We could use
- * more by flipping pointers around, but it probably makes little
- * sense.
- */
-
-#define MAX_DMA_BUFS 3
-static int alloc_bufs_at_read;
-module_param(alloc_bufs_at_read, bool, 0444);
-MODULE_PARM_DESC(alloc_bufs_at_read,
-		"Non-zero value causes DMA buffers to be allocated when the "
-		"video capture device is read, rather than at module load "
-		"time.  This saves memory, but decreases the chances of "
-		"successfully getting those buffers.");
-
-static int n_dma_bufs = 3;
-module_param(n_dma_bufs, uint, 0644);
-MODULE_PARM_DESC(n_dma_bufs,
-		"The number of DMA buffers to allocate.  Can be either two "
-		"(saves memory, makes timing tighter) or three.");
-
-static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2;  /* Worst case */
-module_param(dma_buf_size, uint, 0444);
-MODULE_PARM_DESC(dma_buf_size,
-		"The size of the allocated DMA buffers.  If actual operating "
-		"parameters require larger buffers, an attempt to reallocate "
-		"will be made.");
-
-static int min_buffers = 1;
-module_param(min_buffers, uint, 0644);
-MODULE_PARM_DESC(min_buffers,
-		"The minimum number of streaming I/O buffers we are willing "
-		"to work with.");
-
-static int max_buffers = 10;
-module_param(max_buffers, uint, 0644);
-MODULE_PARM_DESC(max_buffers,
-		"The maximum number of streaming I/O buffers an application "
-		"will be allowed to allocate.  These buffers are big and live "
-		"in vmalloc space.");
-
-static int flip;
-module_param(flip, bool, 0444);
-MODULE_PARM_DESC(flip,
-		"If set, the sensor will be instructed to flip the image "
-		"vertically.");
-
-
-enum cafe_state {
-	S_NOTREADY,	/* Not yet initialized */
-	S_IDLE,		/* Just hanging around */
-	S_FLAKED,	/* Some sort of problem */
-	S_SINGLEREAD,	/* In read() */
-	S_SPECREAD,   	/* Speculative read (for future read()) */
-	S_STREAMING	/* Streaming data */
-};
-
-/*
- * Tracking of streaming I/O buffers.
- */
-struct cafe_sio_buffer {
-	struct list_head list;
-	struct v4l2_buffer v4lbuf;
-	char *buffer;   /* Where it lives in kernel space */
-	int mapcount;
-	struct cafe_camera *cam;
-};
-
-/*
- * A description of one of our devices.
- * Locking: controlled by s_mutex.  Certain fields, however, require
- * 	    the dev_lock spinlock; they are marked as such by comments.
- *	    dev_lock is also required for access to device registers.
- */
-struct cafe_camera
-{
-	struct v4l2_device v4l2_dev;
-	enum cafe_state state;
-	unsigned long flags;   		/* Buffer status, mainly (dev_lock) */
-	int users;			/* How many open FDs */
-	struct file *owner;		/* Who has data access (v4l2) */
-
-	/*
-	 * Subsystem structures.
-	 */
-	struct pci_dev *pdev;
-	struct video_device vdev;
-	struct i2c_adapter i2c_adapter;
-	struct v4l2_subdev *sensor;
-	unsigned short sensor_addr;
-
-	unsigned char __iomem *regs;
-	struct list_head dev_list;	/* link to other devices */
-
-	/* DMA buffers */
-	unsigned int nbufs;		/* How many are alloc'd */
-	int next_buf;			/* Next to consume (dev_lock) */
-	unsigned int dma_buf_size;  	/* allocated size */
-	void *dma_bufs[MAX_DMA_BUFS];	/* Internal buffer addresses */
-	dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */
-	unsigned int specframes;	/* Unconsumed spec frames (dev_lock) */
-	unsigned int sequence;		/* Frame sequence number */
-	unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual buffers */
-
-	/* Streaming buffers */
-	unsigned int n_sbufs;		/* How many we have */
-	struct cafe_sio_buffer *sb_bufs; /* The array of housekeeping structs */
-	struct list_head sb_avail;	/* Available for data (we own) (dev_lock) */
-	struct list_head sb_full;	/* With data (user space owns) (dev_lock) */
-	struct tasklet_struct s_tasklet;
-
-	/* Current operating parameters */
-	u32 sensor_type;		/* Currently ov7670 only */
-	struct v4l2_pix_format pix_format;
-	enum v4l2_mbus_pixelcode mbus_code;
-
-	/* Locks */
-	struct mutex s_mutex; /* Access to this structure */
-	spinlock_t dev_lock;  /* Access to device */
-
-	/* Misc */
-	wait_queue_head_t smbus_wait;	/* Waiting on i2c events */
-	wait_queue_head_t iowait;	/* Waiting on frame data */
-};
-
-/*
- * Status flags.  Always manipulated with bit operations.
- */
-#define CF_BUF0_VALID	 0	/* Buffers valid - first three */
-#define CF_BUF1_VALID	 1
-#define CF_BUF2_VALID	 2
-#define CF_DMA_ACTIVE	 3	/* A frame is incoming */
-#define CF_CONFIG_NEEDED 4	/* Must configure hardware */
-
-#define sensor_call(cam, o, f, args...) \
-	v4l2_subdev_call(cam->sensor, o, f, ##args)
-
-static inline struct cafe_camera *to_cam(struct v4l2_device *dev)
-{
-	return container_of(dev, struct cafe_camera, v4l2_dev);
-}
-
-static struct cafe_format_struct {
-	__u8 *desc;
-	__u32 pixelformat;
-	int bpp;   /* Bytes per pixel */
-	enum v4l2_mbus_pixelcode mbus_code;
-} cafe_formats[] = {
-	{
-		.desc		= "YUYV 4:2:2",
-		.pixelformat	= V4L2_PIX_FMT_YUYV,
-		.mbus_code	= V4L2_MBUS_FMT_YUYV8_2X8,
-		.bpp		= 2,
-	},
-	{
-		.desc		= "RGB 444",
-		.pixelformat	= V4L2_PIX_FMT_RGB444,
-		.mbus_code	= V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE,
-		.bpp		= 2,
-	},
-	{
-		.desc		= "RGB 565",
-		.pixelformat	= V4L2_PIX_FMT_RGB565,
-		.mbus_code	= V4L2_MBUS_FMT_RGB565_2X8_LE,
-		.bpp		= 2,
-	},
-	{
-		.desc		= "Raw RGB Bayer",
-		.pixelformat	= V4L2_PIX_FMT_SBGGR8,
-		.mbus_code	= V4L2_MBUS_FMT_SBGGR8_1X8,
-		.bpp		= 1
-	},
-};
-#define N_CAFE_FMTS ARRAY_SIZE(cafe_formats)
-
-static struct cafe_format_struct *cafe_find_format(u32 pixelformat)
-{
-	unsigned i;
-
-	for (i = 0; i < N_CAFE_FMTS; i++)
-		if (cafe_formats[i].pixelformat == pixelformat)
-			return cafe_formats + i;
-	/* Not found? Then return the first format. */
-	return cafe_formats;
-}
-
-/*
- * Start over with DMA buffers - dev_lock needed.
- */
-static void cafe_reset_buffers(struct cafe_camera *cam)
-{
-	int i;
-
-	cam->next_buf = -1;
-	for (i = 0; i < cam->nbufs; i++)
-		clear_bit(i, &cam->flags);
-	cam->specframes = 0;
-}
-
-static inline int cafe_needs_config(struct cafe_camera *cam)
-{
-	return test_bit(CF_CONFIG_NEEDED, &cam->flags);
-}
-
-static void cafe_set_config_needed(struct cafe_camera *cam, int needed)
-{
-	if (needed)
-		set_bit(CF_CONFIG_NEEDED, &cam->flags);
-	else
-		clear_bit(CF_CONFIG_NEEDED, &cam->flags);
-}
-
-
-
-
-/*
- * Debugging and related.
- */
-#define cam_err(cam, fmt, arg...) \
-	dev_err(&(cam)->pdev->dev, fmt, ##arg);
-#define cam_warn(cam, fmt, arg...) \
-	dev_warn(&(cam)->pdev->dev, fmt, ##arg);
-#define cam_dbg(cam, fmt, arg...) \
-	dev_dbg(&(cam)->pdev->dev, fmt, ##arg);
-
-
-/* ---------------------------------------------------------------------*/
-
-/*
- * Device register I/O
- */
-static inline void cafe_reg_write(struct cafe_camera *cam, unsigned int reg,
-		unsigned int val)
-{
-	iowrite32(val, cam->regs + reg);
-}
-
-static inline unsigned int cafe_reg_read(struct cafe_camera *cam,
-		unsigned int reg)
-{
-	return ioread32(cam->regs + reg);
-}
-
-
-static inline void cafe_reg_write_mask(struct cafe_camera *cam, unsigned int reg,
-		unsigned int val, unsigned int mask)
-{
-	unsigned int v = cafe_reg_read(cam, reg);
-
-	v = (v & ~mask) | (val & mask);
-	cafe_reg_write(cam, reg, v);
-}
-
-static inline void cafe_reg_clear_bit(struct cafe_camera *cam,
-		unsigned int reg, unsigned int val)
-{
-	cafe_reg_write_mask(cam, reg, 0, val);
-}
-
-static inline void cafe_reg_set_bit(struct cafe_camera *cam,
-		unsigned int reg, unsigned int val)
-{
-	cafe_reg_write_mask(cam, reg, val, val);
-}
-
-
-
-/* -------------------------------------------------------------------- */
-/*
- * The I2C/SMBUS interface to the camera itself starts here.  The
- * controller handles SMBUS itself, presenting a relatively simple register
- * interface; all we have to do is to tell it where to route the data.
- */
-#define CAFE_SMBUS_TIMEOUT (HZ)  /* generous */
-
-static int cafe_smbus_write_done(struct cafe_camera *cam)
-{
-	unsigned long flags;
-	int c1;
-
-	/*
-	 * We must delay after the interrupt, or the controller gets confused
-	 * and never does give us good status.  Fortunately, we don't do this
-	 * often.
-	 */
-	udelay(20);
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	c1 = cafe_reg_read(cam, REG_TWSIC1);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	return (c1 & (TWSIC1_WSTAT|TWSIC1_ERROR)) != TWSIC1_WSTAT;
-}
-
-static int cafe_smbus_write_data(struct cafe_camera *cam,
-		u16 addr, u8 command, u8 value)
-{
-	unsigned int rval;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
-	rval |= TWSIC0_OVMAGIC;  /* Make OV sensors work */
-	/*
-	 * Marvell sez set clkdiv to all 1's for now.
-	 */
-	rval |= TWSIC0_CLKDIV;
-	cafe_reg_write(cam, REG_TWSIC0, rval);
-	(void) cafe_reg_read(cam, REG_TWSIC1); /* force write */
-	rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
-	cafe_reg_write(cam, REG_TWSIC1, rval);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-
-	/* Unfortunately, reading TWSIC1 too soon after sending a command
-	 * causes the device to die.
-	 * Use a busy-wait because we often send a large quantity of small
-	 * commands at-once; using msleep() would cause a lot of context
-	 * switches which take longer than 2ms, resulting in a noticeable
-	 * boot-time and capture-start delays.
-	 */
-	mdelay(2);
-
-	/*
-	 * Another sad fact is that sometimes, commands silently complete but
-	 * cafe_smbus_write_done() never becomes aware of this.
-	 * This happens at random and appears to possible occur with any
-	 * command.
-	 * We don't understand why this is. We work around this issue
-	 * with the timeout in the wait below, assuming that all commands
-	 * complete within the timeout.
-	 */
-	wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(cam),
-			CAFE_SMBUS_TIMEOUT);
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	rval = cafe_reg_read(cam, REG_TWSIC1);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-
-	if (rval & TWSIC1_WSTAT) {
-		cam_err(cam, "SMBUS write (%02x/%02x/%02x) timed out\n", addr,
-				command, value);
-		return -EIO;
-	}
-	if (rval & TWSIC1_ERROR) {
-		cam_err(cam, "SMBUS write (%02x/%02x/%02x) error\n", addr,
-				command, value);
-		return -EIO;
-	}
-	return 0;
-}
-
-
-
-static int cafe_smbus_read_done(struct cafe_camera *cam)
-{
-	unsigned long flags;
-	int c1;
-
-	/*
-	 * We must delay after the interrupt, or the controller gets confused
-	 * and never does give us good status.  Fortunately, we don't do this
-	 * often.
-	 */
-	udelay(20);
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	c1 = cafe_reg_read(cam, REG_TWSIC1);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	return c1 & (TWSIC1_RVALID|TWSIC1_ERROR);
-}
-
-
-
-static int cafe_smbus_read_data(struct cafe_camera *cam,
-		u16 addr, u8 command, u8 *value)
-{
-	unsigned int rval;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
-	rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */
-	/*
-	 * Marvel sez set clkdiv to all 1's for now.
-	 */
-	rval |= TWSIC0_CLKDIV;
-	cafe_reg_write(cam, REG_TWSIC0, rval);
-	(void) cafe_reg_read(cam, REG_TWSIC1); /* force write */
-	rval = TWSIC1_READ | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
-	cafe_reg_write(cam, REG_TWSIC1, rval);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-
-	wait_event_timeout(cam->smbus_wait,
-			cafe_smbus_read_done(cam), CAFE_SMBUS_TIMEOUT);
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	rval = cafe_reg_read(cam, REG_TWSIC1);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-
-	if (rval & TWSIC1_ERROR) {
-		cam_err(cam, "SMBUS read (%02x/%02x) error\n", addr, command);
-		return -EIO;
-	}
-	if (! (rval & TWSIC1_RVALID)) {
-		cam_err(cam, "SMBUS read (%02x/%02x) timed out\n", addr,
-				command);
-		return -EIO;
-	}
-	*value = rval & 0xff;
-	return 0;
-}
-
-/*
- * Perform a transfer over SMBUS.  This thing is called under
- * the i2c bus lock, so we shouldn't race with ourselves...
- */
-static int cafe_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
-		unsigned short flags, char rw, u8 command,
-		int size, union i2c_smbus_data *data)
-{
-	struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter);
-	struct cafe_camera *cam = to_cam(v4l2_dev);
-	int ret = -EINVAL;
-
-	/*
-	 * This interface would appear to only do byte data ops.  OK
-	 * it can do word too, but the cam chip has no use for that.
-	 */
-	if (size != I2C_SMBUS_BYTE_DATA) {
-		cam_err(cam, "funky xfer size %d\n", size);
-		return -EINVAL;
-	}
-
-	if (rw == I2C_SMBUS_WRITE)
-		ret = cafe_smbus_write_data(cam, addr, command, data->byte);
-	else if (rw == I2C_SMBUS_READ)
-		ret = cafe_smbus_read_data(cam, addr, command, &data->byte);
-	return ret;
-}
-
-
-static void cafe_smbus_enable_irq(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_reg_set_bit(cam, REG_IRQMASK, TWSIIRQS);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-}
-
-static u32 cafe_smbus_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_SMBUS_READ_BYTE_DATA  |
-	       I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
-}
-
-static struct i2c_algorithm cafe_smbus_algo = {
-	.smbus_xfer = cafe_smbus_xfer,
-	.functionality = cafe_smbus_func
-};
-
-/* Somebody is on the bus */
-static void cafe_ctlr_stop_dma(struct cafe_camera *cam);
-static void cafe_ctlr_power_down(struct cafe_camera *cam);
-
-static int cafe_smbus_setup(struct cafe_camera *cam)
-{
-	struct i2c_adapter *adap = &cam->i2c_adapter;
-	int ret;
-
-	cafe_smbus_enable_irq(cam);
-	adap->owner = THIS_MODULE;
-	adap->algo = &cafe_smbus_algo;
-	strcpy(adap->name, "cafe_ccic");
-	adap->dev.parent = &cam->pdev->dev;
-	i2c_set_adapdata(adap, &cam->v4l2_dev);
-	ret = i2c_add_adapter(adap);
-	if (ret)
-		printk(KERN_ERR "Unable to register cafe i2c adapter\n");
-	return ret;
-}
-
-static void cafe_smbus_shutdown(struct cafe_camera *cam)
-{
-	i2c_del_adapter(&cam->i2c_adapter);
-}
-
-
-/* ------------------------------------------------------------------- */
-/*
- * Deal with the controller.
- */
-
-/*
- * Do everything we think we need to have the interface operating
- * according to the desired format.
- */
-static void cafe_ctlr_dma(struct cafe_camera *cam)
-{
-	/*
-	 * Store the first two Y buffers (we aren't supporting
-	 * planar formats for now, so no UV bufs).  Then either
-	 * set the third if it exists, or tell the controller
-	 * to just use two.
-	 */
-	cafe_reg_write(cam, REG_Y0BAR, cam->dma_handles[0]);
-	cafe_reg_write(cam, REG_Y1BAR, cam->dma_handles[1]);
-	if (cam->nbufs > 2) {
-		cafe_reg_write(cam, REG_Y2BAR, cam->dma_handles[2]);
-		cafe_reg_clear_bit(cam, REG_CTRL1, C1_TWOBUFS);
-	}
-	else
-		cafe_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS);
-	cafe_reg_write(cam, REG_UBAR, 0); /* 32 bits only for now */
-}
-
-static void cafe_ctlr_image(struct cafe_camera *cam)
-{
-	int imgsz;
-	struct v4l2_pix_format *fmt = &cam->pix_format;
-
-	imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) |
-		(fmt->bytesperline & IMGSZ_H_MASK);
-	cafe_reg_write(cam, REG_IMGSIZE, imgsz);
-	cafe_reg_write(cam, REG_IMGOFFSET, 0);
-	/* YPITCH just drops the last two bits */
-	cafe_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline,
-			IMGP_YP_MASK);
-	/*
-	 * Tell the controller about the image format we are using.
-	 */
-	switch (cam->pix_format.pixelformat) {
-	case V4L2_PIX_FMT_YUYV:
-	    cafe_reg_write_mask(cam, REG_CTRL0,
-			    C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV,
-			    C0_DF_MASK);
-	    break;
-
-	case V4L2_PIX_FMT_RGB444:
-	    cafe_reg_write_mask(cam, REG_CTRL0,
-			    C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB,
-			    C0_DF_MASK);
-		/* Alpha value? */
-	    break;
-
-	case V4L2_PIX_FMT_RGB565:
-	    cafe_reg_write_mask(cam, REG_CTRL0,
-			    C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR,
-			    C0_DF_MASK);
-	    break;
-
-	default:
-	    cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat);
-	    break;
-	}
-	/*
-	 * Make sure it knows we want to use hsync/vsync.
-	 */
-	cafe_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC,
-			C0_SIFM_MASK);
-}
-
-
-/*
- * Configure the controller for operation; caller holds the
- * device mutex.
- */
-static int cafe_ctlr_configure(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_ctlr_dma(cam);
-	cafe_ctlr_image(cam);
-	cafe_set_config_needed(cam, 0);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	return 0;
-}
-
-static void cafe_ctlr_irq_enable(struct cafe_camera *cam)
-{
-	/*
-	 * Clear any pending interrupts, since we do not
-	 * expect to have I/O active prior to enabling.
-	 */
-	cafe_reg_write(cam, REG_IRQSTAT, FRAMEIRQS);
-	cafe_reg_set_bit(cam, REG_IRQMASK, FRAMEIRQS);
-}
-
-static void cafe_ctlr_irq_disable(struct cafe_camera *cam)
-{
-	cafe_reg_clear_bit(cam, REG_IRQMASK, FRAMEIRQS);
-}
-
-/*
- * Make the controller start grabbing images.  Everything must
- * be set up before doing this.
- */
-static void cafe_ctlr_start(struct cafe_camera *cam)
-{
-	/* set_bit performs a read, so no other barrier should be
-	   needed here */
-	cafe_reg_set_bit(cam, REG_CTRL0, C0_ENABLE);
-}
-
-static void cafe_ctlr_stop(struct cafe_camera *cam)
-{
-	cafe_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
-}
-
-static void cafe_ctlr_init(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	/*
-	 * Added magic to bring up the hardware on the B-Test board
-	 */
-	cafe_reg_write(cam, 0x3038, 0x8);
-	cafe_reg_write(cam, 0x315c, 0x80008);
-	/*
-	 * Go through the dance needed to wake the device up.
-	 * Note that these registers are global and shared
-	 * with the NAND and SD devices.  Interaction between the
-	 * three still needs to be examined.
-	 */
-	cafe_reg_write(cam, REG_GL_CSR, GCSR_SRS|GCSR_MRS); /* Needed? */
-	cafe_reg_write(cam, REG_GL_CSR, GCSR_SRC|GCSR_MRC);
-	cafe_reg_write(cam, REG_GL_CSR, GCSR_SRC|GCSR_MRS);
-	/*
-	 * Here we must wait a bit for the controller to come around.
-	 */
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	msleep(5);
-	spin_lock_irqsave(&cam->dev_lock, flags);
-
-	cafe_reg_write(cam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC);
-	cafe_reg_set_bit(cam, REG_GL_IMASK, GIMSK_CCIC_EN);
-	/*
-	 * Make sure it's not powered down.
-	 */
-	cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
-	/*
-	 * Turn off the enable bit.  It sure should be off anyway,
-	 * but it's good to be sure.
-	 */
-	cafe_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
-	/*
-	 * Mask all interrupts.
-	 */
-	cafe_reg_write(cam, REG_IRQMASK, 0);
-	/*
-	 * Clock the sensor appropriately.  Controller clock should
-	 * be 48MHz, sensor "typical" value is half that.
-	 */
-	cafe_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-}
-
-
-/*
- * Stop the controller, and don't return until we're really sure that no
- * further DMA is going on.
- */
-static void cafe_ctlr_stop_dma(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	/*
-	 * Theory: stop the camera controller (whether it is operating
-	 * or not).  Delay briefly just in case we race with the SOF
-	 * interrupt, then wait until no DMA is active.
-	 */
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_ctlr_stop(cam);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	mdelay(1);
-	wait_event_timeout(cam->iowait,
-			!test_bit(CF_DMA_ACTIVE, &cam->flags), HZ);
-	if (test_bit(CF_DMA_ACTIVE, &cam->flags))
-		cam_err(cam, "Timeout waiting for DMA to end\n");
-		/* This would be bad news - what now? */
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cam->state = S_IDLE;
-	cafe_ctlr_irq_disable(cam);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-}
-
-/*
- * Power up and down.
- */
-static void cafe_ctlr_power_up(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
-	/*
-	 * Part one of the sensor dance: turn the global
-	 * GPIO signal on.
-	 */
-	cafe_reg_write(cam, REG_GL_FCR, GFCR_GPIO_ON);
-	cafe_reg_write(cam, REG_GL_GPIOR, GGPIO_OUT|GGPIO_VAL);
-	/*
-	 * Put the sensor into operational mode (assumes OLPC-style
-	 * wiring).  Control 0 is reset - set to 1 to operate.
-	 * Control 1 is power down, set to 0 to operate.
-	 */
-	cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */
-/*	mdelay(1); */ /* Marvell says 1ms will do it */
-	cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0);
-/*	mdelay(1); */ /* Enough? */
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	msleep(5); /* Just to be sure */
-}
-
-static void cafe_ctlr_power_down(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1);
-	cafe_reg_write(cam, REG_GL_FCR, GFCR_GPIO_ON);
-	cafe_reg_write(cam, REG_GL_GPIOR, GGPIO_OUT);
-	cafe_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-}
-
-/* -------------------------------------------------------------------- */
-/*
- * Communications with the sensor.
- */
-
-static int __cafe_cam_reset(struct cafe_camera *cam)
-{
-	return sensor_call(cam, core, reset, 0);
-}
-
-/*
- * We have found the sensor on the i2c.  Let's try to have a
- * conversation.
- */
-static int cafe_cam_init(struct cafe_camera *cam)
-{
-	struct v4l2_dbg_chip_ident chip;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	if (cam->state != S_NOTREADY)
-		cam_warn(cam, "Cam init with device in funky state %d",
-				cam->state);
-	ret = __cafe_cam_reset(cam);
-	if (ret)
-		goto out;
-	chip.ident = V4L2_IDENT_NONE;
-	chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
-	chip.match.addr = cam->sensor_addr;
-	ret = sensor_call(cam, core, g_chip_ident, &chip);
-	if (ret)
-		goto out;
-	cam->sensor_type = chip.ident;
-	if (cam->sensor_type != V4L2_IDENT_OV7670) {
-		cam_err(cam, "Unsupported sensor type 0x%x", cam->sensor_type);
-		ret = -EINVAL;
-		goto out;
-	}
-/* Get/set parameters? */
-	ret = 0;
-	cam->state = S_IDLE;
-  out:
-	cafe_ctlr_power_down(cam);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-/*
- * Configure the sensor to match the parameters we have.  Caller should
- * hold s_mutex
- */
-static int cafe_cam_set_flip(struct cafe_camera *cam)
-{
-	struct v4l2_control ctrl;
-
-	memset(&ctrl, 0, sizeof(ctrl));
-	ctrl.id = V4L2_CID_VFLIP;
-	ctrl.value = flip;
-	return sensor_call(cam, core, s_ctrl, &ctrl);
-}
-
-
-static int cafe_cam_configure(struct cafe_camera *cam)
-{
-	struct v4l2_mbus_framefmt mbus_fmt;
-	int ret;
-
-	v4l2_fill_mbus_format(&mbus_fmt, &cam->pix_format, cam->mbus_code);
-	ret = sensor_call(cam, core, init, 0);
-	if (ret == 0)
-		ret = sensor_call(cam, video, s_mbus_fmt, &mbus_fmt);
-	/*
-	 * OV7670 does weird things if flip is set *before* format...
-	 */
-	ret += cafe_cam_set_flip(cam);
-	return ret;
-}
-
-/* -------------------------------------------------------------------- */
-/*
- * DMA buffer management.  These functions need s_mutex held.
- */
-
-/* FIXME: this is inefficient as hell, since dma_alloc_coherent just
- * does a get_free_pages() call, and we waste a good chunk of an orderN
- * allocation.  Should try to allocate the whole set in one chunk.
- */
-static int cafe_alloc_dma_bufs(struct cafe_camera *cam, int loadtime)
-{
-	int i;
-
-	cafe_set_config_needed(cam, 1);
-	if (loadtime)
-		cam->dma_buf_size = dma_buf_size;
-	else
-		cam->dma_buf_size = cam->pix_format.sizeimage;
-	if (n_dma_bufs > 3)
-		n_dma_bufs = 3;
-
-	cam->nbufs = 0;
-	for (i = 0; i < n_dma_bufs; i++) {
-		cam->dma_bufs[i] = dma_alloc_coherent(&cam->pdev->dev,
-				cam->dma_buf_size, cam->dma_handles + i,
-				GFP_KERNEL);
-		if (cam->dma_bufs[i] == NULL) {
-			cam_warn(cam, "Failed to allocate DMA buffer\n");
-			break;
-		}
-		/* For debug, remove eventually */
-		memset(cam->dma_bufs[i], 0xcc, cam->dma_buf_size);
-		(cam->nbufs)++;
-	}
-
-	switch (cam->nbufs) {
-	case 1:
-	    dma_free_coherent(&cam->pdev->dev, cam->dma_buf_size,
-			    cam->dma_bufs[0], cam->dma_handles[0]);
-	    cam->nbufs = 0;
-	case 0:
-	    cam_err(cam, "Insufficient DMA buffers, cannot operate\n");
-	    return -ENOMEM;
-
-	case 2:
-	    if (n_dma_bufs > 2)
-		    cam_warn(cam, "Will limp along with only 2 buffers\n");
-	    break;
-	}
-	return 0;
-}
-
-static void cafe_free_dma_bufs(struct cafe_camera *cam)
-{
-	int i;
-
-	for (i = 0; i < cam->nbufs; i++) {
-		dma_free_coherent(&cam->pdev->dev, cam->dma_buf_size,
-				cam->dma_bufs[i], cam->dma_handles[i]);
-		cam->dma_bufs[i] = NULL;
-	}
-	cam->nbufs = 0;
-}
-
-
-
-
-
-/* ----------------------------------------------------------------------- */
-/*
- * Here starts the V4L2 interface code.
- */
-
-/*
- * Read an image from the device.
- */
-static ssize_t cafe_deliver_buffer(struct cafe_camera *cam,
-		char __user *buffer, size_t len, loff_t *pos)
-{
-	int bufno;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	if (cam->next_buf < 0) {
-		cam_err(cam, "deliver_buffer: No next buffer\n");
-		spin_unlock_irqrestore(&cam->dev_lock, flags);
-		return -EIO;
-	}
-	bufno = cam->next_buf;
-	clear_bit(bufno, &cam->flags);
-	if (++(cam->next_buf) >= cam->nbufs)
-		cam->next_buf = 0;
-	if (! test_bit(cam->next_buf, &cam->flags))
-		cam->next_buf = -1;
-	cam->specframes = 0;
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-
-	if (len > cam->pix_format.sizeimage)
-		len = cam->pix_format.sizeimage;
-	if (copy_to_user(buffer, cam->dma_bufs[bufno], len))
-		return -EFAULT;
-	(*pos) += len;
-	return len;
-}
-
-/*
- * Get everything ready, and start grabbing frames.
- */
-static int cafe_read_setup(struct cafe_camera *cam, enum cafe_state state)
-{
-	int ret;
-	unsigned long flags;
-
-	/*
-	 * Configuration.  If we still don't have DMA buffers,
-	 * make one last, desperate attempt.
-	 */
-	if (cam->nbufs == 0)
-		if (cafe_alloc_dma_bufs(cam, 0))
-			return -ENOMEM;
-
-	if (cafe_needs_config(cam)) {
-		cafe_cam_configure(cam);
-		ret = cafe_ctlr_configure(cam);
-		if (ret)
-			return ret;
-	}
-
-	/*
-	 * Turn it loose.
-	 */
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_reset_buffers(cam);
-	cafe_ctlr_irq_enable(cam);
-	cam->state = state;
-	cafe_ctlr_start(cam);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	return 0;
-}
-
-
-static ssize_t cafe_v4l_read(struct file *filp,
-		char __user *buffer, size_t len, loff_t *pos)
-{
-	struct cafe_camera *cam = filp->private_data;
-	int ret = 0;
-
-	/*
-	 * Perhaps we're in speculative read mode and already
-	 * have data?
-	 */
-	mutex_lock(&cam->s_mutex);
-	if (cam->state == S_SPECREAD) {
-		if (cam->next_buf >= 0) {
-			ret = cafe_deliver_buffer(cam, buffer, len, pos);
-			if (ret != 0)
-				goto out_unlock;
-		}
-	} else if (cam->state == S_FLAKED || cam->state == S_NOTREADY) {
-		ret = -EIO;
-		goto out_unlock;
-	} else if (cam->state != S_IDLE) {
-		ret = -EBUSY;
-		goto out_unlock;
-	}
-
-	/*
-	 * v4l2: multiple processes can open the device, but only
-	 * one gets to grab data from it.
-	 */
-	if (cam->owner && cam->owner != filp) {
-		ret = -EBUSY;
-		goto out_unlock;
-	}
-	cam->owner = filp;
-
-	/*
-	 * Do setup if need be.
-	 */
-	if (cam->state != S_SPECREAD) {
-		ret = cafe_read_setup(cam, S_SINGLEREAD);
-		if (ret)
-			goto out_unlock;
-	}
-	/*
-	 * Wait for something to happen.  This should probably
-	 * be interruptible (FIXME).
-	 */
-	wait_event_timeout(cam->iowait, cam->next_buf >= 0, HZ);
-	if (cam->next_buf < 0) {
-		cam_err(cam, "read() operation timed out\n");
-		cafe_ctlr_stop_dma(cam);
-		ret = -EIO;
-		goto out_unlock;
-	}
-	/*
-	 * Give them their data and we should be done.
-	 */
-	ret = cafe_deliver_buffer(cam, buffer, len, pos);
-
-  out_unlock:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-
-
-
-
-
-
-/*
- * Streaming I/O support.
- */
-
-
-
-static int cafe_vidioc_streamon(struct file *filp, void *priv,
-		enum v4l2_buf_type type)
-{
-	struct cafe_camera *cam = filp->private_data;
-	int ret = -EINVAL;
-
-	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		goto out;
-	mutex_lock(&cam->s_mutex);
-	if (cam->state != S_IDLE || cam->n_sbufs == 0)
-		goto out_unlock;
-
-	cam->sequence = 0;
-	ret = cafe_read_setup(cam, S_STREAMING);
-
-  out_unlock:
-	mutex_unlock(&cam->s_mutex);
-  out:
-	return ret;
-}
-
-
-static int cafe_vidioc_streamoff(struct file *filp, void *priv,
-		enum v4l2_buf_type type)
-{
-	struct cafe_camera *cam = filp->private_data;
-	int ret = -EINVAL;
-
-	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		goto out;
-	mutex_lock(&cam->s_mutex);
-	if (cam->state != S_STREAMING)
-		goto out_unlock;
-
-	cafe_ctlr_stop_dma(cam);
-	ret = 0;
-
-  out_unlock:
-	mutex_unlock(&cam->s_mutex);
-  out:
-	return ret;
-}
-
-
-
-static int cafe_setup_siobuf(struct cafe_camera *cam, int index)
-{
-	struct cafe_sio_buffer *buf = cam->sb_bufs + index;
-
-	INIT_LIST_HEAD(&buf->list);
-	buf->v4lbuf.length = PAGE_ALIGN(cam->pix_format.sizeimage);
-	buf->buffer = vmalloc_user(buf->v4lbuf.length);
-	if (buf->buffer == NULL)
-		return -ENOMEM;
-	buf->mapcount = 0;
-	buf->cam = cam;
-
-	buf->v4lbuf.index = index;
-	buf->v4lbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	buf->v4lbuf.field = V4L2_FIELD_NONE;
-	buf->v4lbuf.memory = V4L2_MEMORY_MMAP;
-	/*
-	 * Offset: must be 32-bit even on a 64-bit system.  videobuf-dma-sg
-	 * just uses the length times the index, but the spec warns
-	 * against doing just that - vma merging problems.  So we
-	 * leave a gap between each pair of buffers.
-	 */
-	buf->v4lbuf.m.offset = 2*index*buf->v4lbuf.length;
-	return 0;
-}
-
-static int cafe_free_sio_buffers(struct cafe_camera *cam)
-{
-	int i;
-
-	/*
-	 * If any buffers are mapped, we cannot free them at all.
-	 */
-	for (i = 0; i < cam->n_sbufs; i++)
-		if (cam->sb_bufs[i].mapcount > 0)
-			return -EBUSY;
-	/*
-	 * OK, let's do it.
-	 */
-	for (i = 0; i < cam->n_sbufs; i++)
-		vfree(cam->sb_bufs[i].buffer);
-	cam->n_sbufs = 0;
-	kfree(cam->sb_bufs);
-	cam->sb_bufs = NULL;
-	INIT_LIST_HEAD(&cam->sb_avail);
-	INIT_LIST_HEAD(&cam->sb_full);
-	return 0;
-}
-
-
-
-static int cafe_vidioc_reqbufs(struct file *filp, void *priv,
-		struct v4l2_requestbuffers *req)
-{
-	struct cafe_camera *cam = filp->private_data;
-	int ret = 0;  /* Silence warning */
-
-	/*
-	 * Make sure it's something we can do.  User pointers could be
-	 * implemented without great pain, but that's not been done yet.
-	 */
-	if (req->memory != V4L2_MEMORY_MMAP)
-		return -EINVAL;
-	/*
-	 * If they ask for zero buffers, they really want us to stop streaming
-	 * (if it's happening) and free everything.  Should we check owner?
-	 */
-	mutex_lock(&cam->s_mutex);
-	if (req->count == 0) {
-		if (cam->state == S_STREAMING)
-			cafe_ctlr_stop_dma(cam);
-		ret = cafe_free_sio_buffers (cam);
-		goto out;
-	}
-	/*
-	 * Device needs to be idle and working.  We *could* try to do the
-	 * right thing in S_SPECREAD by shutting things down, but it
-	 * probably doesn't matter.
-	 */
-	if (cam->state != S_IDLE || (cam->owner && cam->owner != filp)) {
-		ret = -EBUSY;
-		goto out;
-	}
-	cam->owner = filp;
-
-	if (req->count < min_buffers)
-		req->count = min_buffers;
-	else if (req->count > max_buffers)
-		req->count = max_buffers;
-	if (cam->n_sbufs > 0) {
-		ret = cafe_free_sio_buffers(cam);
-		if (ret)
-			goto out;
-	}
-
-	cam->sb_bufs = kzalloc(req->count*sizeof(struct cafe_sio_buffer),
-			GFP_KERNEL);
-	if (cam->sb_bufs == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	for (cam->n_sbufs = 0; cam->n_sbufs < req->count; (cam->n_sbufs++)) {
-		ret = cafe_setup_siobuf(cam, cam->n_sbufs);
-		if (ret)
-			break;
-	}
-
-	if (cam->n_sbufs == 0)  /* no luck at all - ret already set */
-		kfree(cam->sb_bufs);
-	req->count = cam->n_sbufs;  /* In case of partial success */
-
-  out:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-static int cafe_vidioc_querybuf(struct file *filp, void *priv,
-		struct v4l2_buffer *buf)
-{
-	struct cafe_camera *cam = filp->private_data;
-	int ret = -EINVAL;
-
-	mutex_lock(&cam->s_mutex);
-	if (buf->index >= cam->n_sbufs)
-		goto out;
-	*buf = cam->sb_bufs[buf->index].v4lbuf;
-	ret = 0;
-  out:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-static int cafe_vidioc_qbuf(struct file *filp, void *priv,
-		struct v4l2_buffer *buf)
-{
-	struct cafe_camera *cam = filp->private_data;
-	struct cafe_sio_buffer *sbuf;
-	int ret = -EINVAL;
-	unsigned long flags;
-
-	mutex_lock(&cam->s_mutex);
-	if (buf->index >= cam->n_sbufs)
-		goto out;
-	sbuf = cam->sb_bufs + buf->index;
-	if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_QUEUED) {
-		ret = 0; /* Already queued?? */
-		goto out;
-	}
-	if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_DONE) {
-		/* Spec doesn't say anything, seems appropriate tho */
-		ret = -EBUSY;
-		goto out;
-	}
-	sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_QUEUED;
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	list_add(&sbuf->list, &cam->sb_avail);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	ret = 0;
-  out:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-static int cafe_vidioc_dqbuf(struct file *filp, void *priv,
-		struct v4l2_buffer *buf)
-{
-	struct cafe_camera *cam = filp->private_data;
-	struct cafe_sio_buffer *sbuf;
-	int ret = -EINVAL;
-	unsigned long flags;
-
-	mutex_lock(&cam->s_mutex);
-	if (cam->state != S_STREAMING)
-		goto out_unlock;
-	if (list_empty(&cam->sb_full) && filp->f_flags & O_NONBLOCK) {
-		ret = -EAGAIN;
-		goto out_unlock;
-	}
-
-	while (list_empty(&cam->sb_full) && cam->state == S_STREAMING) {
-		mutex_unlock(&cam->s_mutex);
-		if (wait_event_interruptible(cam->iowait,
-						!list_empty(&cam->sb_full))) {
-			ret = -ERESTARTSYS;
-			goto out;
-		}
-		mutex_lock(&cam->s_mutex);
-	}
-
-	if (cam->state != S_STREAMING)
-		ret = -EINTR;
-	else {
-		spin_lock_irqsave(&cam->dev_lock, flags);
-		/* Should probably recheck !list_empty() here */
-		sbuf = list_entry(cam->sb_full.next,
-				struct cafe_sio_buffer, list);
-		list_del_init(&sbuf->list);
-		spin_unlock_irqrestore(&cam->dev_lock, flags);
-		sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_DONE;
-		*buf = sbuf->v4lbuf;
-		ret = 0;
-	}
-
-  out_unlock:
-	mutex_unlock(&cam->s_mutex);
-  out:
-	return ret;
-}
-
-
-
-static void cafe_v4l_vm_open(struct vm_area_struct *vma)
-{
-	struct cafe_sio_buffer *sbuf = vma->vm_private_data;
-	/*
-	 * Locking: done under mmap_sem, so we don't need to
-	 * go back to the camera lock here.
-	 */
-	sbuf->mapcount++;
-}
-
-
-static void cafe_v4l_vm_close(struct vm_area_struct *vma)
-{
-	struct cafe_sio_buffer *sbuf = vma->vm_private_data;
-
-	mutex_lock(&sbuf->cam->s_mutex);
-	sbuf->mapcount--;
-	/* Docs say we should stop I/O too... */
-	if (sbuf->mapcount == 0)
-		sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_MAPPED;
-	mutex_unlock(&sbuf->cam->s_mutex);
-}
-
-static const struct vm_operations_struct cafe_v4l_vm_ops = {
-	.open = cafe_v4l_vm_open,
-	.close = cafe_v4l_vm_close
-};
-
-
-static int cafe_v4l_mmap(struct file *filp, struct vm_area_struct *vma)
-{
-	struct cafe_camera *cam = filp->private_data;
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
-	int ret = -EINVAL;
-	int i;
-	struct cafe_sio_buffer *sbuf = NULL;
-
-	if (! (vma->vm_flags & VM_WRITE) || ! (vma->vm_flags & VM_SHARED))
-		return -EINVAL;
-	/*
-	 * Find the buffer they are looking for.
-	 */
-	mutex_lock(&cam->s_mutex);
-	for (i = 0; i < cam->n_sbufs; i++)
-		if (cam->sb_bufs[i].v4lbuf.m.offset == offset) {
-			sbuf = cam->sb_bufs + i;
-			break;
-		}
-	if (sbuf == NULL)
-		goto out;
-
-	ret = remap_vmalloc_range(vma, sbuf->buffer, 0);
-	if (ret)
-		goto out;
-	vma->vm_flags |= VM_DONTEXPAND;
-	vma->vm_private_data = sbuf;
-	vma->vm_ops = &cafe_v4l_vm_ops;
-	sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_MAPPED;
-	cafe_v4l_vm_open(vma);
-	ret = 0;
-  out:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-
-static int cafe_v4l_open(struct file *filp)
-{
-	struct cafe_camera *cam = video_drvdata(filp);
-
-	filp->private_data = cam;
-
-	mutex_lock(&cam->s_mutex);
-	if (cam->users == 0) {
-		cafe_ctlr_power_up(cam);
-		__cafe_cam_reset(cam);
-		cafe_set_config_needed(cam, 1);
-	/* FIXME make sure this is complete */
-	}
-	(cam->users)++;
-	mutex_unlock(&cam->s_mutex);
-	return 0;
-}
-
-
-static int cafe_v4l_release(struct file *filp)
-{
-	struct cafe_camera *cam = filp->private_data;
-
-	mutex_lock(&cam->s_mutex);
-	(cam->users)--;
-	if (filp == cam->owner) {
-		cafe_ctlr_stop_dma(cam);
-		cafe_free_sio_buffers(cam);
-		cam->owner = NULL;
-	}
-	if (cam->users == 0) {
-		cafe_ctlr_power_down(cam);
-		if (alloc_bufs_at_read)
-			cafe_free_dma_bufs(cam);
-	}
-	mutex_unlock(&cam->s_mutex);
-	return 0;
-}
-
-
-
-static unsigned int cafe_v4l_poll(struct file *filp,
-		struct poll_table_struct *pt)
-{
-	struct cafe_camera *cam = filp->private_data;
-
-	poll_wait(filp, &cam->iowait, pt);
-	if (cam->next_buf >= 0)
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
-
-
-static int cafe_vidioc_queryctrl(struct file *filp, void *priv,
-		struct v4l2_queryctrl *qc)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, core, queryctrl, qc);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-static int cafe_vidioc_g_ctrl(struct file *filp, void *priv,
-		struct v4l2_control *ctrl)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, core, g_ctrl, ctrl);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-static int cafe_vidioc_s_ctrl(struct file *filp, void *priv,
-		struct v4l2_control *ctrl)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, core, s_ctrl, ctrl);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-
-
-
-static int cafe_vidioc_querycap(struct file *file, void *priv,
-		struct v4l2_capability *cap)
-{
-	strcpy(cap->driver, "cafe_ccic");
-	strcpy(cap->card, "cafe_ccic");
-	cap->version = CAFE_VERSION;
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
-		V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
-	return 0;
-}
-
-
-/*
- * The default format we use until somebody says otherwise.
- */
-static const struct v4l2_pix_format cafe_def_pix_format = {
-	.width		= VGA_WIDTH,
-	.height		= VGA_HEIGHT,
-	.pixelformat	= V4L2_PIX_FMT_YUYV,
-	.field		= V4L2_FIELD_NONE,
-	.bytesperline	= VGA_WIDTH*2,
-	.sizeimage	= VGA_WIDTH*VGA_HEIGHT*2,
-};
-
-static const enum v4l2_mbus_pixelcode cafe_def_mbus_code =
-					V4L2_MBUS_FMT_YUYV8_2X8;
-
-static int cafe_vidioc_enum_fmt_vid_cap(struct file *filp,
-		void *priv, struct v4l2_fmtdesc *fmt)
-{
-	if (fmt->index >= N_CAFE_FMTS)
-		return -EINVAL;
-	strlcpy(fmt->description, cafe_formats[fmt->index].desc,
-			sizeof(fmt->description));
-	fmt->pixelformat = cafe_formats[fmt->index].pixelformat;
-	return 0;
-}
-
-static int cafe_vidioc_try_fmt_vid_cap(struct file *filp, void *priv,
-		struct v4l2_format *fmt)
-{
-	struct cafe_camera *cam = priv;
-	struct cafe_format_struct *f;
-	struct v4l2_pix_format *pix = &fmt->fmt.pix;
-	struct v4l2_mbus_framefmt mbus_fmt;
-	int ret;
-
-	f = cafe_find_format(pix->pixelformat);
-	pix->pixelformat = f->pixelformat;
-	v4l2_fill_mbus_format(&mbus_fmt, pix, f->mbus_code);
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, video, try_mbus_fmt, &mbus_fmt);
-	mutex_unlock(&cam->s_mutex);
-	v4l2_fill_pix_format(pix, &mbus_fmt);
-	pix->bytesperline = pix->width * f->bpp;
-	pix->sizeimage = pix->height * pix->bytesperline;
-	return ret;
-}
-
-static int cafe_vidioc_s_fmt_vid_cap(struct file *filp, void *priv,
-		struct v4l2_format *fmt)
-{
-	struct cafe_camera *cam = priv;
-	struct cafe_format_struct *f;
-	int ret;
-
-	/*
-	 * Can't do anything if the device is not idle
-	 * Also can't if there are streaming buffers in place.
-	 */
-	if (cam->state != S_IDLE || cam->n_sbufs > 0)
-		return -EBUSY;
-
-	f = cafe_find_format(fmt->fmt.pix.pixelformat);
-
-	/*
-	 * See if the formatting works in principle.
-	 */
-	ret = cafe_vidioc_try_fmt_vid_cap(filp, priv, fmt);
-	if (ret)
-		return ret;
-	/*
-	 * Now we start to change things for real, so let's do it
-	 * under lock.
-	 */
-	mutex_lock(&cam->s_mutex);
-	cam->pix_format = fmt->fmt.pix;
-	cam->mbus_code = f->mbus_code;
-
-	/*
-	 * Make sure we have appropriate DMA buffers.
-	 */
-	ret = -ENOMEM;
-	if (cam->nbufs > 0 && cam->dma_buf_size < cam->pix_format.sizeimage)
-		cafe_free_dma_bufs(cam);
-	if (cam->nbufs == 0) {
-		if (cafe_alloc_dma_bufs(cam, 0))
-			goto out;
-	}
-	/*
-	 * It looks like this might work, so let's program the sensor.
-	 */
-	ret = cafe_cam_configure(cam);
-	if (! ret)
-		ret = cafe_ctlr_configure(cam);
-  out:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-/*
- * Return our stored notion of how the camera is/should be configured.
- * The V4l2 spec wants us to be smarter, and actually get this from
- * the camera (and not mess with it at open time).  Someday.
- */
-static int cafe_vidioc_g_fmt_vid_cap(struct file *filp, void *priv,
-		struct v4l2_format *f)
-{
-	struct cafe_camera *cam = priv;
-
-	f->fmt.pix = cam->pix_format;
-	return 0;
-}
-
-/*
- * We only have one input - the sensor - so minimize the nonsense here.
- */
-static int cafe_vidioc_enum_input(struct file *filp, void *priv,
-		struct v4l2_input *input)
-{
-	if (input->index != 0)
-		return -EINVAL;
-
-	input->type = V4L2_INPUT_TYPE_CAMERA;
-	input->std = V4L2_STD_ALL; /* Not sure what should go here */
-	strcpy(input->name, "Camera");
-	return 0;
-}
-
-static int cafe_vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
-{
-	*i = 0;
-	return 0;
-}
-
-static int cafe_vidioc_s_input(struct file *filp, void *priv, unsigned int i)
-{
-	if (i != 0)
-		return -EINVAL;
-	return 0;
-}
-
-/* from vivi.c */
-static int cafe_vidioc_s_std(struct file *filp, void *priv, v4l2_std_id *a)
-{
-	return 0;
-}
-
-/*
- * G/S_PARM.  Most of this is done by the sensor, but we are
- * the level which controls the number of read buffers.
- */
-static int cafe_vidioc_g_parm(struct file *filp, void *priv,
-		struct v4l2_streamparm *parms)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, video, g_parm, parms);
-	mutex_unlock(&cam->s_mutex);
-	parms->parm.capture.readbuffers = n_dma_bufs;
-	return ret;
-}
-
-static int cafe_vidioc_s_parm(struct file *filp, void *priv,
-		struct v4l2_streamparm *parms)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, video, s_parm, parms);
-	mutex_unlock(&cam->s_mutex);
-	parms->parm.capture.readbuffers = n_dma_bufs;
-	return ret;
-}
-
-static int cafe_vidioc_g_chip_ident(struct file *file, void *priv,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	struct cafe_camera *cam = priv;
-
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (v4l2_chip_match_host(&chip->match)) {
-		chip->ident = V4L2_IDENT_CAFE;
-		return 0;
-	}
-	return sensor_call(cam, core, g_chip_ident, chip);
-}
-
-static int cafe_vidioc_enum_framesizes(struct file *filp, void *priv,
-		struct v4l2_frmsizeenum *sizes)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, video, enum_framesizes, sizes);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-static int cafe_vidioc_enum_frameintervals(struct file *filp, void *priv,
-		struct v4l2_frmivalenum *interval)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, video, enum_frameintervals, interval);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int cafe_vidioc_g_register(struct file *file, void *priv,
-		struct v4l2_dbg_register *reg)
-{
-	struct cafe_camera *cam = priv;
-
-	if (v4l2_chip_match_host(&reg->match)) {
-		reg->val = cafe_reg_read(cam, reg->reg);
-		reg->size = 4;
-		return 0;
-	}
-	return sensor_call(cam, core, g_register, reg);
-}
-
-static int cafe_vidioc_s_register(struct file *file, void *priv,
-		struct v4l2_dbg_register *reg)
-{
-	struct cafe_camera *cam = priv;
-
-	if (v4l2_chip_match_host(&reg->match)) {
-		cafe_reg_write(cam, reg->reg, reg->val);
-		return 0;
-	}
-	return sensor_call(cam, core, s_register, reg);
-}
-#endif
-
-/*
- * This template device holds all of those v4l2 methods; we
- * clone it for specific real devices.
- */
-
-static const struct v4l2_file_operations cafe_v4l_fops = {
-	.owner = THIS_MODULE,
-	.open = cafe_v4l_open,
-	.release = cafe_v4l_release,
-	.read = cafe_v4l_read,
-	.poll = cafe_v4l_poll,
-	.mmap = cafe_v4l_mmap,
-	.unlocked_ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops cafe_v4l_ioctl_ops = {
-	.vidioc_querycap 	= cafe_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cafe_vidioc_enum_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap	= cafe_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap	= cafe_vidioc_s_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap	= cafe_vidioc_g_fmt_vid_cap,
-	.vidioc_enum_input	= cafe_vidioc_enum_input,
-	.vidioc_g_input		= cafe_vidioc_g_input,
-	.vidioc_s_input		= cafe_vidioc_s_input,
-	.vidioc_s_std		= cafe_vidioc_s_std,
-	.vidioc_reqbufs		= cafe_vidioc_reqbufs,
-	.vidioc_querybuf	= cafe_vidioc_querybuf,
-	.vidioc_qbuf		= cafe_vidioc_qbuf,
-	.vidioc_dqbuf		= cafe_vidioc_dqbuf,
-	.vidioc_streamon	= cafe_vidioc_streamon,
-	.vidioc_streamoff	= cafe_vidioc_streamoff,
-	.vidioc_queryctrl	= cafe_vidioc_queryctrl,
-	.vidioc_g_ctrl		= cafe_vidioc_g_ctrl,
-	.vidioc_s_ctrl		= cafe_vidioc_s_ctrl,
-	.vidioc_g_parm		= cafe_vidioc_g_parm,
-	.vidioc_s_parm		= cafe_vidioc_s_parm,
-	.vidioc_enum_framesizes = cafe_vidioc_enum_framesizes,
-	.vidioc_enum_frameintervals = cafe_vidioc_enum_frameintervals,
-	.vidioc_g_chip_ident    = cafe_vidioc_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register 	= cafe_vidioc_g_register,
-	.vidioc_s_register 	= cafe_vidioc_s_register,
-#endif
-};
-
-static struct video_device cafe_v4l_template = {
-	.name = "cafe",
-	.tvnorms = V4L2_STD_NTSC_M,
-	.current_norm = V4L2_STD_NTSC_M,  /* make mplayer happy */
-
-	.fops = &cafe_v4l_fops,
-	.ioctl_ops = &cafe_v4l_ioctl_ops,
-	.release = video_device_release_empty,
-};
-
-
-/* ---------------------------------------------------------------------- */
-/*
- * Interrupt handler stuff
- */
-
-
-
-static void cafe_frame_tasklet(unsigned long data)
-{
-	struct cafe_camera *cam = (struct cafe_camera *) data;
-	int i;
-	unsigned long flags;
-	struct cafe_sio_buffer *sbuf;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	for (i = 0; i < cam->nbufs; i++) {
-		int bufno = cam->next_buf;
-		if (bufno < 0) {  /* "will never happen" */
-			cam_err(cam, "No valid bufs in tasklet!\n");
-			break;
-		}
-		if (++(cam->next_buf) >= cam->nbufs)
-			cam->next_buf = 0;
-		if (! test_bit(bufno, &cam->flags))
-			continue;
-		if (list_empty(&cam->sb_avail))
-			break;  /* Leave it valid, hope for better later */
-		clear_bit(bufno, &cam->flags);
-		sbuf = list_entry(cam->sb_avail.next,
-				struct cafe_sio_buffer, list);
-		/*
-		 * Drop the lock during the big copy.  This *should* be safe...
-		 */
-		spin_unlock_irqrestore(&cam->dev_lock, flags);
-		memcpy(sbuf->buffer, cam->dma_bufs[bufno],
-				cam->pix_format.sizeimage);
-		sbuf->v4lbuf.bytesused = cam->pix_format.sizeimage;
-		sbuf->v4lbuf.sequence = cam->buf_seq[bufno];
-		sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_QUEUED;
-		sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_DONE;
-		spin_lock_irqsave(&cam->dev_lock, flags);
-		list_move_tail(&sbuf->list, &cam->sb_full);
-	}
-	if (! list_empty(&cam->sb_full))
-		wake_up(&cam->iowait);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-}
-
-
-
-static void cafe_frame_complete(struct cafe_camera *cam, int frame)
-{
-	/*
-	 * Basic frame housekeeping.
-	 */
-	if (test_bit(frame, &cam->flags) && printk_ratelimit())
-		cam_err(cam, "Frame overrun on %d, frames lost\n", frame);
-	set_bit(frame, &cam->flags);
-	clear_bit(CF_DMA_ACTIVE, &cam->flags);
-	if (cam->next_buf < 0)
-		cam->next_buf = frame;
-	cam->buf_seq[frame] = ++(cam->sequence);
-
-	switch (cam->state) {
-	/*
-	 * If in single read mode, try going speculative.
-	 */
-	    case S_SINGLEREAD:
-		cam->state = S_SPECREAD;
-		cam->specframes = 0;
-		wake_up(&cam->iowait);
-		break;
-
-	/*
-	 * If we are already doing speculative reads, and nobody is
-	 * reading them, just stop.
-	 */
-	    case S_SPECREAD:
-		if (++(cam->specframes) >= cam->nbufs) {
-			cafe_ctlr_stop(cam);
-			cafe_ctlr_irq_disable(cam);
-			cam->state = S_IDLE;
-		}
-		wake_up(&cam->iowait);
-		break;
-	/*
-	 * For the streaming case, we defer the real work to the
-	 * camera tasklet.
-	 *
-	 * FIXME: if the application is not consuming the buffers,
-	 * we should eventually put things on hold and restart in
-	 * vidioc_dqbuf().
-	 */
-	    case S_STREAMING:
-		tasklet_schedule(&cam->s_tasklet);
-		break;
-
-	    default:
-		cam_err(cam, "Frame interrupt in non-operational state\n");
-		break;
-	}
-}
-
-
-
-
-static void cafe_frame_irq(struct cafe_camera *cam, unsigned int irqs)
-{
-	unsigned int frame;
-
-	cafe_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); /* Clear'em all */
-	/*
-	 * Handle any frame completions.  There really should
-	 * not be more than one of these, or we have fallen
-	 * far behind.
-	 */
-	for (frame = 0; frame < cam->nbufs; frame++)
-		if (irqs & (IRQ_EOF0 << frame))
-			cafe_frame_complete(cam, frame);
-	/*
-	 * If a frame starts, note that we have DMA active.  This
-	 * code assumes that we won't get multiple frame interrupts
-	 * at once; may want to rethink that.
-	 */
-	if (irqs & (IRQ_SOF0 | IRQ_SOF1 | IRQ_SOF2))
-		set_bit(CF_DMA_ACTIVE, &cam->flags);
-}
-
-
-
-static irqreturn_t cafe_irq(int irq, void *data)
-{
-	struct cafe_camera *cam = data;
-	unsigned int irqs;
-
-	spin_lock(&cam->dev_lock);
-	irqs = cafe_reg_read(cam, REG_IRQSTAT);
-	if ((irqs & ALLIRQS) == 0) {
-		spin_unlock(&cam->dev_lock);
-		return IRQ_NONE;
-	}
-	if (irqs & FRAMEIRQS)
-		cafe_frame_irq(cam, irqs);
-	if (irqs & TWSIIRQS) {
-		cafe_reg_write(cam, REG_IRQSTAT, TWSIIRQS);
-		wake_up(&cam->smbus_wait);
-	}
-	spin_unlock(&cam->dev_lock);
-	return IRQ_HANDLED;
-}
-
-
-/* -------------------------------------------------------------------------- */
-/*
- * PCI interface stuff.
- */
-
-static const struct dmi_system_id olpc_xo1_dmi[] = {
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "OLPC"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "XO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "1"),
-		},
-	},
-	{ }
-};
-
-static int cafe_pci_probe(struct pci_dev *pdev,
-		const struct pci_device_id *id)
-{
-	int ret;
-	struct cafe_camera *cam;
-	struct ov7670_config sensor_cfg = {
-		/* This controller only does SMBUS */
-		.use_smbus = true,
-
-		/*
-		 * Exclude QCIF mode, because it only captures a tiny portion
-		 * of the sensor FOV
-		 */
-		.min_width = 320,
-		.min_height = 240,
-	};
-	struct i2c_board_info ov7670_info = {
-		.type = "ov7670",
-		.addr = 0x42,
-		.platform_data = &sensor_cfg,
-	};
-
-	/*
-	 * Start putting together one of our big camera structures.
-	 */
-	ret = -ENOMEM;
-	cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL);
-	if (cam == NULL)
-		goto out;
-	ret = v4l2_device_register(&pdev->dev, &cam->v4l2_dev);
-	if (ret)
-		goto out_free;
-
-	mutex_init(&cam->s_mutex);
-	spin_lock_init(&cam->dev_lock);
-	cam->state = S_NOTREADY;
-	cafe_set_config_needed(cam, 1);
-	init_waitqueue_head(&cam->smbus_wait);
-	init_waitqueue_head(&cam->iowait);
-	cam->pdev = pdev;
-	cam->pix_format = cafe_def_pix_format;
-	cam->mbus_code = cafe_def_mbus_code;
-	INIT_LIST_HEAD(&cam->dev_list);
-	INIT_LIST_HEAD(&cam->sb_avail);
-	INIT_LIST_HEAD(&cam->sb_full);
-	tasklet_init(&cam->s_tasklet, cafe_frame_tasklet, (unsigned long) cam);
-	/*
-	 * Get set up on the PCI bus.
-	 */
-	ret = pci_enable_device(pdev);
-	if (ret)
-		goto out_unreg;
-	pci_set_master(pdev);
-
-	ret = -EIO;
-	cam->regs = pci_iomap(pdev, 0, 0);
-	if (! cam->regs) {
-		printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n");
-		goto out_unreg;
-	}
-	ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam);
-	if (ret)
-		goto out_iounmap;
-	/*
-	 * Initialize the controller and leave it powered up.  It will
-	 * stay that way until the sensor driver shows up.
-	 */
-	cafe_ctlr_init(cam);
-	cafe_ctlr_power_up(cam);
-	/*
-	 * Set up I2C/SMBUS communications.  We have to drop the mutex here
-	 * because the sensor could attach in this call chain, leading to
-	 * unsightly deadlocks.
-	 */
-	ret = cafe_smbus_setup(cam);
-	if (ret)
-		goto out_freeirq;
-
-	/* Apply XO-1 clock speed */
-	if (dmi_check_system(olpc_xo1_dmi))
-		sensor_cfg.clock_speed = 45;
-
-	cam->sensor_addr = ov7670_info.addr;
-	cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev, &cam->i2c_adapter,
-			&ov7670_info, NULL);
-	if (cam->sensor == NULL) {
-		ret = -ENODEV;
-		goto out_smbus;
-	}
-
-	ret = cafe_cam_init(cam);
-	if (ret)
-		goto out_smbus;
-
-	/*
-	 * Get the v4l2 setup done.
-	 */
-	mutex_lock(&cam->s_mutex);
-	cam->vdev = cafe_v4l_template;
-	cam->vdev.debug = 0;
-/*	cam->vdev.debug = V4L2_DEBUG_IOCTL_ARG;*/
-	cam->vdev.v4l2_dev = &cam->v4l2_dev;
-	ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
-	if (ret)
-		goto out_unlock;
-	video_set_drvdata(&cam->vdev, cam);
-
-	/*
-	 * If so requested, try to get our DMA buffers now.
-	 */
-	if (!alloc_bufs_at_read) {
-		if (cafe_alloc_dma_bufs(cam, 1))
-			cam_warn(cam, "Unable to alloc DMA buffers at load"
-					" will try again later.");
-	}
-
-	mutex_unlock(&cam->s_mutex);
-	return 0;
-
-out_unlock:
-	mutex_unlock(&cam->s_mutex);
-out_smbus:
-	cafe_smbus_shutdown(cam);
-out_freeirq:
-	cafe_ctlr_power_down(cam);
-	free_irq(pdev->irq, cam);
-out_iounmap:
-	pci_iounmap(pdev, cam->regs);
-out_free:
-	v4l2_device_unregister(&cam->v4l2_dev);
-out_unreg:
-	kfree(cam);
-out:
-	return ret;
-}
-
-
-/*
- * Shut down an initialized device
- */
-static void cafe_shutdown(struct cafe_camera *cam)
-{
-/* FIXME: Make sure we take care of everything here */
-	if (cam->n_sbufs > 0)
-		/* What if they are still mapped?  Shouldn't be, but... */
-		cafe_free_sio_buffers(cam);
-	cafe_ctlr_stop_dma(cam);
-	cafe_ctlr_power_down(cam);
-	cafe_smbus_shutdown(cam);
-	cafe_free_dma_bufs(cam);
-	free_irq(cam->pdev->irq, cam);
-	pci_iounmap(cam->pdev, cam->regs);
-	video_unregister_device(&cam->vdev);
-}
-
-
-static void cafe_pci_remove(struct pci_dev *pdev)
-{
-	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
-	struct cafe_camera *cam = to_cam(v4l2_dev);
-
-	if (cam == NULL) {
-		printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev);
-		return;
-	}
-	mutex_lock(&cam->s_mutex);
-	if (cam->users > 0)
-		cam_warn(cam, "Removing a device with users!\n");
-	cafe_shutdown(cam);
-	v4l2_device_unregister(&cam->v4l2_dev);
-	kfree(cam);
-/* No unlock - it no longer exists */
-}
-
-
-#ifdef CONFIG_PM
-/*
- * Basic power management.
- */
-static int cafe_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
-	struct cafe_camera *cam = to_cam(v4l2_dev);
-	int ret;
-	enum cafe_state cstate;
-
-	ret = pci_save_state(pdev);
-	if (ret)
-		return ret;
-	cstate = cam->state; /* HACK - stop_dma sets to idle */
-	cafe_ctlr_stop_dma(cam);
-	cafe_ctlr_power_down(cam);
-	pci_disable_device(pdev);
-	cam->state = cstate;
-	return 0;
-}
-
-
-static int cafe_pci_resume(struct pci_dev *pdev)
-{
-	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
-	struct cafe_camera *cam = to_cam(v4l2_dev);
-	int ret = 0;
-
-	pci_restore_state(pdev);
-	ret = pci_enable_device(pdev);
-
-	if (ret) {
-		cam_warn(cam, "Unable to re-enable device on resume!\n");
-		return ret;
-	}
-	cafe_ctlr_init(cam);
-
-	mutex_lock(&cam->s_mutex);
-	if (cam->users > 0) {
-		cafe_ctlr_power_up(cam);
-		__cafe_cam_reset(cam);
-	} else {
-		cafe_ctlr_power_down(cam);
-	}
-	mutex_unlock(&cam->s_mutex);
-
-	set_bit(CF_CONFIG_NEEDED, &cam->flags);
-	if (cam->state == S_SPECREAD)
-		cam->state = S_IDLE;  /* Don't bother restarting */
-	else if (cam->state == S_SINGLEREAD || cam->state == S_STREAMING)
-		ret = cafe_read_setup(cam, cam->state);
-	return ret;
-}
-
-#endif  /* CONFIG_PM */
-
-
-static struct pci_device_id cafe_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL,
-		     PCI_DEVICE_ID_MARVELL_88ALP01_CCIC) },
-	{ 0, }
-};
-
-MODULE_DEVICE_TABLE(pci, cafe_ids);
-
-static struct pci_driver cafe_pci_driver = {
-	.name = "cafe1000-ccic",
-	.id_table = cafe_ids,
-	.probe = cafe_pci_probe,
-	.remove = cafe_pci_remove,
-#ifdef CONFIG_PM
-	.suspend = cafe_pci_suspend,
-	.resume = cafe_pci_resume,
-#endif
-};
-
-
-
-
-static int __init cafe_init(void)
-{
-	int ret;
-
-	printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n",
-			CAFE_VERSION);
-	ret = pci_register_driver(&cafe_pci_driver);
-	if (ret) {
-		printk(KERN_ERR "Unable to register cafe_ccic driver\n");
-		goto out;
-	}
-	ret = 0;
-
-  out:
-	return ret;
-}
-
-
-static void __exit cafe_exit(void)
-{
-	pci_unregister_driver(&cafe_pci_driver);
-}
-
-module_init(cafe_init);
-module_exit(cafe_exit);
diff --git a/drivers/media/video/cpia2/cpia2.h b/drivers/media/video/cpia2/cpia2.h
index 6d6d184..ab25218 100644
--- a/drivers/media/video/cpia2/cpia2.h
+++ b/drivers/media/video/cpia2/cpia2.h
@@ -31,7 +31,6 @@
 #ifndef __CPIA2_H__
 #define __CPIA2_H__
 
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <linux/usb.h>
@@ -43,10 +42,6 @@
 /* define for verbose debug output */
 //#define _CPIA2_DEBUG_
 
-#define CPIA2_MAJ_VER	3
-#define CPIA2_MIN_VER   0
-#define CPIA2_PATCH_VER	0
-
 /***
  * Image defines
  ***/
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index 40eb632..077eb1d 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -29,8 +29,7 @@
  *		Alan Cox <alan@lxorguk.ukuu.org.uk>
  ****************************************************************************/
 
-#include <linux/version.h>
-
+#define CPIA_VERSION "3.0.1"
 
 #include <linux/module.h>
 #include <linux/time.h>
@@ -80,6 +79,7 @@ MODULE_AUTHOR("Steve Miller (STMicroelectronics) <steve.miller@st.com>");
 MODULE_DESCRIPTION("V4L-driver for STMicroelectronics CPiA2 based cameras");
 MODULE_SUPPORTED_DEVICE("video");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CPIA_VERSION);
 
 #define ABOUT "V4L-Driver for Vision CPiA2 based cameras"
 
@@ -465,9 +465,6 @@ static int cpia2_querycap(struct file *file, void *fh, struct v4l2_capability *v
 	if (usb_make_path(cam->dev, vc->bus_info, sizeof(vc->bus_info)) <0)
 		memset(vc->bus_info,0, sizeof(vc->bus_info));
 
-	vc->version = KERNEL_VERSION(CPIA2_MAJ_VER, CPIA2_MIN_VER,
-				     CPIA2_PATCH_VER);
-
 	vc->capabilities = V4L2_CAP_VIDEO_CAPTURE |
 			   V4L2_CAP_READWRITE |
 			   V4L2_CAP_STREAMING;
@@ -1558,8 +1555,8 @@ static void __init check_parameters(void)
  *****************************************************************************/
 static int __init cpia2_init(void)
 {
-	LOG("%s v%d.%d.%d\n",
-	    ABOUT, CPIA2_MAJ_VER, CPIA2_MIN_VER, CPIA2_PATCH_VER);
+	LOG("%s v%s\n",
+	    ABOUT, CPIA_VERSION);
 	check_parameters();
 	cpia2_usb_init();
 	return 0;
@@ -1579,4 +1576,3 @@ static void __exit cpia2_exit(void)
 
 module_init(cpia2_init);
 module_exit(cpia2_exit);
-
diff --git a/drivers/media/video/cx18/cx18-alsa-main.c b/drivers/media/video/cx18/cx18-alsa-main.c
index d50d69d..a1e6c2a 100644
--- a/drivers/media/video/cx18/cx18-alsa-main.c
+++ b/drivers/media/video/cx18/cx18-alsa-main.c
@@ -192,6 +192,7 @@ static int snd_cx18_init(struct v4l2_device *v4l2_dev)
 err_exit_free:
 	if (sc != NULL)
 		snd_card_free(sc);
+	kfree(cxsc);
 err_exit:
 	return ret;
 }
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 0864272..1834207 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -25,7 +25,6 @@
 #ifndef CX18_DRIVER_H
 #define CX18_DRIVER_H
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index e80134f..afe0a29 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -469,7 +469,6 @@ static int cx18_querycap(struct file *file, void *fh,
 	strlcpy(vcap->card, cx->card_name, sizeof(vcap->card));
 	snprintf(vcap->bus_info, sizeof(vcap->bus_info),
 		 "PCI:%s", pci_name(cx->pci_dev));
-	vcap->version = CX18_DRIVER_VERSION; 	    /* version */
 	vcap->capabilities = cx->v4l2_cap; 	    /* capabilities */
 	return 0;
 }
diff --git a/drivers/media/video/cx18/cx18-version.h b/drivers/media/video/cx18/cx18-version.h
index cd189b6..fed48b6 100644
--- a/drivers/media/video/cx18/cx18-version.h
+++ b/drivers/media/video/cx18/cx18-version.h
@@ -23,12 +23,6 @@
 #define CX18_VERSION_H
 
 #define CX18_DRIVER_NAME "cx18"
-#define CX18_DRIVER_VERSION_MAJOR 1
-#define CX18_DRIVER_VERSION_MINOR 5
-#define CX18_DRIVER_VERSION_PATCHLEVEL 0
-
-#define CX18_VERSION __stringify(CX18_DRIVER_VERSION_MAJOR) "." __stringify(CX18_DRIVER_VERSION_MINOR) "." __stringify(CX18_DRIVER_VERSION_PATCHLEVEL)
-#define CX18_DRIVER_VERSION KERNEL_VERSION(CX18_DRIVER_VERSION_MAJOR, \
-	CX18_DRIVER_VERSION_MINOR, CX18_DRIVER_VERSION_PATCHLEVEL)
+#define CX18_VERSION "1.5.1"
 
 #endif
diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index 8d78134..53ff26e 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -355,6 +355,8 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
 	case CX231XX_BOARD_HAUPPAUGE_EXETER:
 	case CX231XX_BOARD_HAUPPAUGE_USBLIVE2:
 	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
 		if (avmode == POLARIS_AVMODE_ANALOGT_TV) {
 			while (afe_power_status != (FLD_PWRDN_TUNING_BIAS |
 						FLD_PWRDN_ENABLE_PLL)) {
@@ -1733,6 +1735,8 @@ int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard)
 		break;
 	case CX231XX_BOARD_CNXT_RDE_253S:
 	case CX231XX_BOARD_CNXT_RDU_253S:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
 		func_mode = 0x01;
 		break;
 	default:
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 2270381..53dae2a 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -387,6 +387,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.norm = V4L2_STD_NTSC,
 		.no_alt_vanc = 1,
 		.external_av = 1,
+		.dont_use_port_3 = 1,
 		.input = {{
 			.type = CX231XX_VMUX_COMPOSITE1,
 			.vmux = CX231XX_VIN_2_1,
@@ -532,6 +533,76 @@ struct cx231xx_board cx231xx_boards[] = {
 			.gpio = NULL,
 		} },
 	},
+	[CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL] = {
+		.name = "Hauppauge WinTV USB2 FM (PAL)",
+		.tuner_type = TUNER_NXP_TDA18271,
+		.tuner_addr = 0x60,
+		.tuner_gpio = RDE250_XCV_TUNER,
+		.tuner_sif_gpio = 0x05,
+		.tuner_scl_gpio = 0x1a,
+		.tuner_sda_gpio = 0x1b,
+		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
+		.ctl_pin_status_mask = 0xFFFFFFC4,
+		.agc_analog_digital_select_gpio = 0x0c,
+		.gpio_pin_status_mask = 0x4001000,
+		.tuner_i2c_master = 1,
+		.norm = V4L2_STD_PAL,
+
+		.input = {{
+			.type = CX231XX_VMUX_TELEVISION,
+			.vmux = CX231XX_VIN_3_1,
+			.amux = CX231XX_AMUX_VIDEO,
+			.gpio = NULL,
+		}, {
+			.type = CX231XX_VMUX_COMPOSITE1,
+			.vmux = CX231XX_VIN_2_1,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = NULL,
+		}, {
+			.type = CX231XX_VMUX_SVIDEO,
+			.vmux = CX231XX_VIN_1_1 |
+				(CX231XX_VIN_1_2 << 8) |
+				CX25840_SVIDEO_ON,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = NULL,
+		} },
+	},
+	[CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC] = {
+		.name = "Hauppauge WinTV USB2 FM (NTSC)",
+		.tuner_type = TUNER_NXP_TDA18271,
+		.tuner_addr = 0x60,
+		.tuner_gpio = RDE250_XCV_TUNER,
+		.tuner_sif_gpio = 0x05,
+		.tuner_scl_gpio = 0x1a,
+		.tuner_sda_gpio = 0x1b,
+		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
+		.ctl_pin_status_mask = 0xFFFFFFC4,
+		.agc_analog_digital_select_gpio = 0x0c,
+		.gpio_pin_status_mask = 0x4001000,
+		.tuner_i2c_master = 1,
+		.norm = V4L2_STD_NTSC,
+
+		.input = {{
+			.type = CX231XX_VMUX_TELEVISION,
+			.vmux = CX231XX_VIN_3_1,
+			.amux = CX231XX_AMUX_VIDEO,
+			.gpio = NULL,
+		}, {
+			.type = CX231XX_VMUX_COMPOSITE1,
+			.vmux = CX231XX_VIN_2_1,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = NULL,
+		}, {
+			.type = CX231XX_VMUX_SVIDEO,
+			.vmux = CX231XX_VIN_1_1 |
+				(CX231XX_VIN_1_2 << 8) |
+				CX25840_SVIDEO_ON,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = NULL,
+		} },
+	},
 };
 const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
 
@@ -553,6 +624,10 @@ struct usb_device_id cx231xx_id_table[] = {
 	 .driver_info = CX231XX_BOARD_CNXT_RDE_250},
 	{USB_DEVICE(0x0572, 0x58A0),
 	 .driver_info = CX231XX_BOARD_CNXT_RDU_250},
+	{USB_DEVICE(0x2040, 0xb110),
+	 .driver_info = CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL},
+	{USB_DEVICE(0x2040, 0xb111),
+	 .driver_info = CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC},
 	{USB_DEVICE(0x2040, 0xb120),
 	 .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
 	{USB_DEVICE(0x2040, 0xb140),
@@ -1051,6 +1126,9 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
 	if (assoc_desc->bFirstInterface != ifnum) {
 		cx231xx_err(DRIVER_NAME ": Not found "
 			    "matching IAD interface\n");
+		cx231xx_devused &= ~(1 << nr);
+		kfree(dev);
+		dev = NULL;
 		return -ENODEV;
 	}
 
diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c
index abe500f..d4457f9 100644
--- a/drivers/media/video/cx231xx/cx231xx-core.c
+++ b/drivers/media/video/cx231xx/cx231xx-core.c
@@ -742,6 +742,8 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
 		case CX231XX_BOARD_CNXT_RDU_253S:
 		case CX231XX_BOARD_HAUPPAUGE_EXETER:
 		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
+		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
+		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
 		errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 			break;
 		default:
@@ -1381,6 +1383,8 @@ int cx231xx_dev_init(struct cx231xx *dev)
 	case CX231XX_BOARD_CNXT_RDU_253S:
 	case CX231XX_BOARD_HAUPPAUGE_EXETER:
 	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
 	errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 		break;
 	default:
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index a69c24d..6e81f97 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -29,7 +29,6 @@
 #include <linux/bitmap.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
@@ -45,7 +44,7 @@
 #include "cx231xx.h"
 #include "cx231xx-vbi.h"
 
-#define CX231XX_VERSION_CODE            KERNEL_VERSION(0, 0, 1)
+#define CX231XX_VERSION "0.0.2"
 
 #define DRIVER_AUTHOR   "Srinivasa Deevi <srinivasa.deevi@conexant.com>"
 #define DRIVER_DESC     "Conexant cx231xx based USB video device driver"
@@ -70,6 +69,7 @@ do {\
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX231XX_VERSION);
 
 static unsigned int card[]     = {[0 ... (CX231XX_MAXBOARDS - 1)] = UNSET };
 static unsigned int video_nr[] = {[0 ... (CX231XX_MAXBOARDS - 1)] = UNSET };
@@ -1179,7 +1179,8 @@ static int vidioc_enum_input(struct file *file, void *priv,
 {
 	struct cx231xx_fh *fh = priv;
 	struct cx231xx *dev = fh->dev;
-	unsigned int n;
+	u32 gen_stat;
+	unsigned int ret, n;
 
 	n = i->index;
 	if (n >= MAX_CX231XX_INPUT)
@@ -1198,6 +1199,18 @@ static int vidioc_enum_input(struct file *file, void *priv,
 
 	i->std = dev->vdev->tvnorms;
 
+	/* If they are asking about the active input, read signal status */
+	if (n == dev->video_input) {
+		ret = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS,
+					    GEN_STAT, 2, &gen_stat, 4);
+		if (ret > 0) {
+			if ((gen_stat & FLD_VPRES) == 0x00)
+				i->status |= V4L2_IN_ST_NO_SIGNAL;
+			if ((gen_stat & FLD_HLOCK) == 0x00)
+				i->status |= V4L2_IN_ST_NO_H_LOCK;
+		}
+	}
+
 	return 0;
 }
 
@@ -1869,8 +1882,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(cap->card, cx231xx_boards[dev->model].name, sizeof(cap->card));
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
 
-	cap->version = CX231XX_VERSION_CODE;
-
 	cap->capabilities = V4L2_CAP_VBI_CAPTURE |
 #if 0
 		V4L2_CAP_SLICED_VBI_CAPTURE |
@@ -2057,7 +2068,6 @@ static int radio_querycap(struct file *file, void *priv,
 	strlcpy(cap->card, cx231xx_boards[dev->model].name, sizeof(cap->card));
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
 
-	cap->version = CX231XX_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
@@ -2570,11 +2580,8 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
 {
 	int ret;
 
-	cx231xx_info("%s: v4l2 driver version %d.%d.%d\n",
-		     dev->name,
-		     (CX231XX_VERSION_CODE >> 16) & 0xff,
-		     (CX231XX_VERSION_CODE >> 8) & 0xff,
-		     CX231XX_VERSION_CODE & 0xff);
+	cx231xx_info("%s: v4l2 driver version %s\n",
+		     dev->name, CX231XX_VERSION);
 
 	/* set default norm */
 	/*dev->norm = cx231xx_video_template.current_norm; */
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index 46dd840..2000bc6 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -43,7 +43,7 @@
 #include "cx231xx-conf-reg.h"
 
 #define DRIVER_NAME                     "cx231xx"
-#define PWR_SLEEP_INTERVAL              5
+#define PWR_SLEEP_INTERVAL              10
 
 /* I2C addresses for control block in Cx231xx */
 #define     AFE_DEVICE_ADDRESS		0x60
@@ -67,6 +67,8 @@
 #define CX231XX_BOARD_PV_XCAPTURE_USB 11
 #define CX231XX_BOARD_KWORLD_UB430_USB_HYBRID 12
 #define CX231XX_BOARD_ICONBIT_U100 13
+#define CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL 14
+#define CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC 15
 
 /* Limits minimum and default number of buffers */
 #define CX231XX_MIN_BUF                 4
@@ -112,7 +114,6 @@
 	V4L2_STD_PAL_BG |  V4L2_STD_PAL_DK    |  V4L2_STD_PAL_I    | \
 	V4L2_STD_PAL_M  |  V4L2_STD_PAL_N     |  V4L2_STD_PAL_Nc   | \
 	V4L2_STD_PAL_60 |  V4L2_STD_SECAM_L   |  V4L2_STD_SECAM_DK)
-#define CX231xx_VERSION_CODE KERNEL_VERSION(0, 0, 2)
 
 #define SLEEP_S5H1432    30
 #define CX23417_OSC_EN   8
diff --git a/drivers/media/video/cx23885/altera-ci.c b/drivers/media/video/cx23885/altera-ci.c
index 678539b..1fa8927 100644
--- a/drivers/media/video/cx23885/altera-ci.c
+++ b/drivers/media/video/cx23885/altera-ci.c
@@ -52,7 +52,6 @@
  * |  DATA7|  DATA6|  DATA5|  DATA4|  DATA3|  DATA2|  DATA1|  DATA0|
  * +-------+-------+-------+-------+-------+-------+-------+-------+
  */
-#include <linux/version.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/videobuf-dvb.h>
 #include "altera-ci.h"
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 9a98dc5..67c4a59 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -1359,7 +1359,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, cx23885_boards[tsport->dev->board].name,
 		sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
-	cap->version = CX23885_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_READWRITE     |
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 934185c..76b7563 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -29,11 +29,17 @@
 #include "../../../staging/altera-stapl/altera.h"
 #include "cx23885.h"
 #include "tuner-xc2028.h"
+#include "netup-eeprom.h"
 #include "netup-init.h"
 #include "altera-ci.h"
+#include "xc4000.h"
 #include "xc5000.h"
 #include "cx23888-ir.h"
 
+static unsigned int netup_card_rev = 1;
+module_param(netup_card_rev, int, 0644);
+MODULE_PARM_DESC(netup_card_rev,
+		"NetUP Dual DVB-T/C CI card revision");
 static unsigned int enable_885_ir;
 module_param(enable_885_ir, int, 0644);
 MODULE_PARM_DESC(enable_885_ir,
@@ -175,6 +181,34 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Leadtek Winfast PxDVR3200 H",
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000] = {
+		.name		= "Leadtek Winfast PxDVR3200 H XC4000",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_XC4000,
+		.tuner_addr	= 0x61,
+		.radio_type	= TUNER_XC4000,
+		.radio_addr	= 0x61,
+		.input		= {{
+			.type	= CX23885_VMUX_TELEVISION,
+			.vmux	= CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2 |
+				  CX25840_NONE0_CH3,
+		}, {
+			.type	= CX23885_VMUX_COMPOSITE1,
+			.vmux	= CX25840_COMPOSITE1,
+		}, {
+			.type	= CX23885_VMUX_SVIDEO,
+			.vmux	= CX25840_SVIDEO_LUMA3 |
+				  CX25840_SVIDEO_CHROMA4,
+		}, {
+			.type	= CX23885_VMUX_COMPONENT,
+			.vmux	= CX25840_VIN7_CH1 |
+				  CX25840_VIN6_CH2 |
+				  CX25840_VIN8_CH3 |
+				  CX25840_COMPONENT_ON,
+		} },
+	},
 	[CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = {
 		.name		= "Compro VideoMate E650F",
 		.portc		= CX23885_MPEG_DVB,
@@ -433,6 +467,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subdevice = 0x6681,
 		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H,
 	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f39,
+		.card	   = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000,
+	}, {
 		.subvendor = 0x185b,
 		.subdevice = 0xe800,
 		.card      = CX23885_BOARD_COMPRO_VIDEOMATE_E650F,
@@ -749,6 +787,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
@@ -909,6 +948,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx_set(GP0_IO, 0x000f000f);
 		break;
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
@@ -1097,12 +1137,19 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1200:
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
-	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 		/* FIXME: Implement me */
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+		ret = cx23888_ir_probe(dev);
+		if (ret)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		ret = cx23888_ir_probe(dev);
@@ -1156,6 +1203,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 void cx23885_ir_fini(struct cx23885_dev *dev)
 {
 	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		cx23885_irq_remove(dev, PCI_MSK_IR);
@@ -1199,6 +1247,7 @@ int netup_jtag_io(void *device, int tms, int tdi, int read_tdo)
 void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
 {
 	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		if (dev->sd_ir)
@@ -1325,6 +1374,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
@@ -1353,10 +1403,12 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
 	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_MYGICA_X8506:
 	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
@@ -1383,6 +1435,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		const struct firmware *fw;
 		const char *filename = "dvb-netup-altera-01.fw";
 		char *action = "configure";
+		static struct netup_card_info cinfo;
 		struct altera_config netup_config = {
 			.dev = dev,
 			.action = action,
@@ -1391,6 +1444,21 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 
 		netup_initialize(dev);
 
+		netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
+		if (netup_card_rev)
+			cinfo.rev = netup_card_rev;
+
+		switch (cinfo.rev) {
+		case 0x4:
+			filename = "dvb-netup-altera-04.fw";
+			break;
+		default:
+			filename = "dvb-netup-altera-01.fw";
+			break;
+		}
+		printk(KERN_INFO "NetUP card rev=0x%x fw_filename=%s\n",
+				cinfo.rev, filename);
+
 		ret = request_firmware(&fw, filename, &dev->pci->dev);
 		if (ret != 0)
 			printk(KERN_ERR "did not find the firmware file. (%s) "
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 419777a..ee41a88 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -42,6 +42,7 @@
 MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
 MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX23885_VERSION);
 
 static unsigned int debug;
 module_param(debug, int, 0644);
@@ -2147,14 +2148,8 @@ static struct pci_driver cx23885_pci_driver = {
 
 static int __init cx23885_init(void)
 {
-	printk(KERN_INFO "cx23885 driver version %d.%d.%d loaded\n",
-	       (CX23885_VERSION_CODE >> 16) & 0xff,
-	       (CX23885_VERSION_CODE >>  8) & 0xff,
-	       CX23885_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx23885: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx23885 driver version %s loaded\n",
+		CX23885_VERSION);
 	return pci_register_driver(&cx23885_pci_driver);
 }
 
@@ -2165,5 +2160,3 @@ static void __exit cx23885_fini(void)
 
 module_init(cx23885_init);
 module_exit(cx23885_fini);
-
-/* ----------------------------------------------------------- */
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 3c315f9..aa83f07 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -37,6 +37,7 @@
 #include "tda8290.h"
 #include "tda18271.h"
 #include "lgdt330x.h"
+#include "xc4000.h"
 #include "xc5000.h"
 #include "max2165.h"
 #include "tda10048.h"
@@ -921,6 +922,26 @@ static int dvb_register(struct cx23885_tsport *port)
 				fe->ops.tuner_ops.set_config(fe, &ctl);
 		}
 		break;
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+		i2c_bus = &dev->i2c_bus[0];
+
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_xc3028,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend	*fe;
+			struct xc4000_config	cfg = {
+				.i2c_address	  = 0x61,
+				.default_pm	  = 0,
+				.dvb_amplitude	  = 134,
+				.set_smoothedcvbs = 1,
+				.if_khz		  = 4560
+			};
+
+			fe = dvb_attach(xc4000_attach, fe0->dvb.frontend,
+					&dev->i2c_bus[1].i2c_adap, &cfg);
+		}
+		break;
 	case CX23885_BOARD_TBS_6920:
 		i2c_bus = &dev->i2c_bus[1];
 
@@ -1249,7 +1270,7 @@ int cx23885_dvb_unregister(struct cx23885_tsport *port)
 	 * implement MFE support.
 	 */
 	fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
-	if (fe0->dvb.frontend)
+	if (fe0 && fe0->dvb.frontend)
 		videobuf_dvb_unregister_bus(&port->frontends);
 
 	switch (port->dev->board) {
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index e97cafd..ce765e3 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -82,6 +82,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
 		return;
 
 	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_TEVII_S470:
@@ -133,6 +134,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
 
 	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
 	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
@@ -229,6 +231,9 @@ static void cx23885_input_ir_stop(struct cx23885_dev *dev)
 		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
 		v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
 	}
+	flush_work_sync(&dev->cx25840_work);
+	flush_work_sync(&dev->ir_rx_work);
+	flush_work_sync(&dev->ir_tx_work);
 }
 
 static void cx23885_input_ir_close(struct rc_dev *rc)
@@ -257,6 +262,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
 		return -ENODEV;
 
 	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index ee57f6b..896bb32 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1000,7 +1000,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, cx23885_boards[dev->board].name,
 		sizeof(cap->card));
 	sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci));
-	cap->version = CX23885_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_READWRITE     |
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index c186473..d86bc0b 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -36,10 +36,9 @@
 #include "cx23885-reg.h"
 #include "media/cx2341x.h"
 
-#include <linux/version.h>
 #include <linux/mutex.h>
 
-#define CX23885_VERSION_CODE KERNEL_VERSION(0, 0, 2)
+#define CX23885_VERSION "0.0.3"
 
 #define UNSET (-1U)
 
@@ -86,6 +85,7 @@
 #define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28
 #define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID     29
 #define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30
+#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000 31
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 423c1af..68d1240 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -113,6 +113,8 @@ MODULE_DESCRIPTION("ALSA driver module for cx2388x based TV cards");
 MODULE_AUTHOR("Ricardo Cerqueira");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
+
 MODULE_SUPPORTED_DEVICE("{{Conexant,23881},"
 			"{{Conexant,23882},"
 			"{{Conexant,23883}");
@@ -973,14 +975,8 @@ static struct pci_driver cx88_audio_pci_driver = {
  */
 static int __init cx88_audio_init(void)
 {
-	printk(KERN_INFO "cx2388x alsa driver version %d.%d.%d loaded\n",
-	       (CX88_VERSION_CODE >> 16) & 0xff,
-	       (CX88_VERSION_CODE >>  8) & 0xff,
-	       CX88_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx2388x alsa driver version %s loaded\n",
+	       CX88_VERSION);
 	return pci_register_driver(&cx88_audio_pci_driver);
 }
 
@@ -994,10 +990,3 @@ static void __exit cx88_audio_fini(void)
 
 module_init(cx88_audio_init);
 module_exit(cx88_audio_fini);
-
-/* ----------------------------------------------------------- */
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 11e49bb..e46446a 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -42,6 +42,7 @@
 MODULE_DESCRIPTION("driver for cx2388x/cx23416 based mpeg encoder cards");
 MODULE_AUTHOR("Jelle Foks <jelle@foks.us>, Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
 
 static unsigned int mpegbufs = 32;
 module_param(mpegbufs,int,0644);
@@ -730,7 +731,6 @@ static int vidioc_querycap (struct file *file, void  *priv,
 	strcpy(cap->driver, "cx88_blackbird");
 	strlcpy(cap->card, core->board.name, sizeof(cap->card));
 	sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci));
-	cap->version = CX88_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_READWRITE     |
@@ -1368,14 +1368,8 @@ static struct cx8802_driver cx8802_blackbird_driver = {
 
 static int __init blackbird_init(void)
 {
-	printk(KERN_INFO "cx2388x blackbird driver version %d.%d.%d loaded\n",
-	       (CX88_VERSION_CODE >> 16) & 0xff,
-	       (CX88_VERSION_CODE >>  8) & 0xff,
-	       CX88_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx2388x blackbird driver version %s loaded\n",
+	       CX88_VERSION);
 	return cx8802_register_driver(&cx8802_blackbird_driver);
 }
 
@@ -1389,11 +1383,3 @@ module_exit(blackbird_fini);
 
 module_param_named(video_debug,cx8802_mpeg_template.debug, int, 0644);
 MODULE_PARM_DESC(debug,"enable debug messages [video]");
-
-/* ----------------------------------------------------------- */
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
- */
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 27222c9..0d719fa 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -28,6 +28,7 @@
 
 #include "cx88.h"
 #include "tea5767.h"
+#include "xc4000.h"
 
 static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
 static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
@@ -2119,6 +2120,99 @@ static const struct cx88_board cx88_boards[] = {
 		},
 		.mpeg           = CX88_MPEG_DVB,
 	},
+	[CX88_BOARD_WINFAST_DTV1800H_XC4000] = {
+		.name		= "Leadtek WinFast DTV1800 H (XC4000)",
+		.tuner_type	= TUNER_XC4000,
+		.radio_type	= TUNER_XC4000,
+		.tuner_addr	= 0x61,
+		.radio_addr	= 0x61,
+		/*
+		 * GPIO setting
+		 *
+		 *  2: mute (0=off,1=on)
+		 * 12: tuner reset pin
+		 * 13: audio source (0=tuner audio,1=line in)
+		 * 14: FM (0=on,1=off ???)
+		 */
+		.input		= {{
+			.type	= CX88_VMUX_TELEVISION,
+			.vmux	= 0,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6040,	/* pin 13 = 0, pin 14 = 1 */
+			.gpio2	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_COMPOSITE1,
+			.vmux	= 1,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6060,	/* pin 13 = 1, pin 14 = 1 */
+			.gpio2	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_SVIDEO,
+			.vmux	= 2,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6060,	/* pin 13 = 1, pin 14 = 1 */
+			.gpio2	= 0x0000,
+		}},
+		.radio = {
+			.type	= CX88_RADIO,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6000,	/* pin 13 = 0, pin 14 = 0 */
+			.gpio2	= 0x0000,
+		},
+		.mpeg		= CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_WINFAST_DTV2000H_PLUS] = {
+		.name		= "Leadtek WinFast DTV2000 H PLUS",
+		.tuner_type	= TUNER_XC4000,
+		.radio_type	= TUNER_XC4000,
+		.tuner_addr	= 0x61,
+		.radio_addr	= 0x61,
+		/*
+		 * GPIO
+		 *   2: 1: mute audio
+		 *  12: 0: reset XC4000
+		 *  13: 1: audio input is line in (0: tuner)
+		 *  14: 0: FM radio
+		 *  16: 0: RF input is cable
+		 */
+		.input		= {{
+			.type	= CX88_VMUX_TELEVISION,
+			.vmux	= 0,
+			.gpio0	= 0x0403,
+			.gpio1	= 0xF0D7,
+			.gpio2	= 0x0101,
+			.gpio3	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_CABLE,
+			.vmux	= 0,
+			.gpio0	= 0x0403,
+			.gpio1	= 0xF0D7,
+			.gpio2	= 0x0100,
+			.gpio3	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_COMPOSITE1,
+			.vmux	= 1,
+			.gpio0	= 0x0403,	/* was 0x0407 */
+			.gpio1	= 0xF0F7,
+			.gpio2	= 0x0101,
+			.gpio3	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_SVIDEO,
+			.vmux	= 2,
+			.gpio0	= 0x0403,	/* was 0x0407 */
+			.gpio1	= 0xF0F7,
+			.gpio2	= 0x0101,
+			.gpio3	= 0x0000,
+		}},
+		.radio = {
+			.type	= CX88_RADIO,
+			.gpio0	= 0x0403,
+			.gpio1	= 0xF097,
+			.gpio2	= 0x0100,
+			.gpio3	= 0x0000,
+		},
+		.mpeg		= CX88_MPEG_DVB,
+	},
 	[CX88_BOARD_PROF_7301] = {
 		.name           = "Prof 7301 DVB-S/S2",
 		.tuner_type     = UNSET,
@@ -2581,6 +2675,15 @@ static const struct cx88_subid cx88_subids[] = {
 		.subdevice = 0x6654,
 		.card      = CX88_BOARD_WINFAST_DTV1800H,
 	}, {
+		/* WinFast DTV1800 H with XC4000 tuner */
+		.subvendor = 0x107d,
+		.subdevice = 0x6f38,
+		.card      = CX88_BOARD_WINFAST_DTV1800H_XC4000,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f42,
+		.card      = CX88_BOARD_WINFAST_DTV2000H_PLUS,
+	}, {
 		/* PVR2000 PAL Model [107d:6630] */
 		.subvendor = 0x107d,
 		.subdevice = 0x6630,
@@ -2846,6 +2949,23 @@ static int cx88_xc3028_winfast1800h_callback(struct cx88_core *core,
 	return -EINVAL;
 }
 
+static int cx88_xc4000_winfast2000h_plus_callback(struct cx88_core *core,
+						  int command, int arg)
+{
+	switch (command) {
+	case XC4000_TUNER_RESET:
+		/* GPIO 12 (xc4000 tuner reset) */
+		cx_set(MO_GP1_IO, 0x1010);
+		mdelay(50);
+		cx_clear(MO_GP1_IO, 0x10);
+		mdelay(75);
+		cx_set(MO_GP1_IO, 0x10);
+		mdelay(75);
+		return 0;
+	}
+	return -EINVAL;
+}
+
 /* ------------------------------------------------------------------- */
 /* some Divco specific stuff                                           */
 static int cx88_pv_8000gt_callback(struct cx88_core *core,
@@ -2948,6 +3068,19 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core,
 	return -EINVAL;
 }
 
+static int cx88_xc4000_tuner_callback(struct cx88_core *core,
+				      int command, int arg)
+{
+	/* Board-specific callbacks */
+	switch (core->boardnr) {
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		return cx88_xc4000_winfast2000h_plus_callback(core,
+							      command, arg);
+	}
+	return -EINVAL;
+}
+
 /* ----------------------------------------------------------------------- */
 /* Tuner callback function. Currently only needed for the Pinnacle 	   *
  * PCTV HD 800i with an xc5000 sillicon tuner. This is used for both	   *
@@ -3022,6 +3155,9 @@ int cx88_tuner_callback(void *priv, int component, int command, int arg)
 		case TUNER_XC2028:
 			info_printk(core, "Calling XC2028/3028 callback\n");
 			return cx88_xc2028_tuner_callback(core, command, arg);
+		case TUNER_XC4000:
+			info_printk(core, "Calling XC4000 callback\n");
+			return cx88_xc4000_tuner_callback(core, command, arg);
 		case TUNER_XC5000:
 			info_printk(core, "Calling XC5000 callback\n");
 			return cx88_xc5000_tuner_callback(core, command, arg);
@@ -3109,13 +3245,13 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core)
 
 	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_WINFAST_DTV1800H:
-		/* GPIO 12 (xc3028 tuner reset) */
-		cx_set(MO_GP1_IO, 0x1010);
-		mdelay(50);
-		cx_clear(MO_GP1_IO, 0x10);
-		mdelay(50);
-		cx_set(MO_GP1_IO, 0x10);
-		mdelay(50);
+		cx88_xc3028_winfast1800h_callback(core, XC2028_TUNER_RESET, 0);
+		break;
+
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		cx88_xc4000_winfast2000h_plus_callback(core,
+						       XC4000_TUNER_RESET, 0);
 		break;
 
 	case CX88_BOARD_TWINHAN_VP1027_DVBS:
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 2e145f0a..fbcaa1c 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -636,6 +636,9 @@ int cx88_reset(struct cx88_core *core)
 	cx_write(MO_PCI_INTSTAT,   0xFFFFFFFF); // Clear PCI int
 	cx_write(MO_INT1_STAT,     0xFFFFFFFF); // Clear RISC int
 
+	/* set default notch filter */
+	cx_andor(MO_HTOTAL, 0x1800, (HLNotchFilter4xFsc << 11));
+
 	/* Reset on-board parts */
 	cx_write(MO_SRST_IO, 0);
 	msleep(10);
@@ -759,8 +762,8 @@ int cx88_set_scale(struct cx88_core *core, unsigned int width, unsigned int heig
 	if (nocomb)
 		value |= (3 << 5); // disable comb filter
 
-	cx_write(MO_FILTER_EVEN,  value);
-	cx_write(MO_FILTER_ODD,   value);
+	cx_andor(MO_FILTER_EVEN,  0x7ffc7f, value); /* preserve PEAKEN, PSEL */
+	cx_andor(MO_FILTER_ODD,   0x7ffc7f, value);
 	dprintk(1,"set_scale: filter  0x%04x\n", value);
 
 	return 0;
@@ -994,10 +997,10 @@ int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm)
 	// htotal
 	tmp64 = norm_htotal(norm) * (u64)vdec_clock;
 	do_div(tmp64, fsc8);
-	htotal = (u32)tmp64 | (HLNotchFilter4xFsc << 11);
+	htotal = (u32)tmp64;
 	dprintk(1,"set_tvnorm: MO_HTOTAL        0x%08x [old=0x%08x,htotal=%d]\n",
 		htotal, cx_read(MO_HTOTAL), (u32)tmp64);
-	cx_write(MO_HTOTAL, htotal);
+	cx_andor(MO_HTOTAL, 0x07ff, htotal);
 
 	// vbi stuff, set vbi offset to 10 (for 20 Clk*2 pixels), this makes
 	// the effective vbi offset ~244 samples, the same as the Bt8x8
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index c69df7e..cf3d33a 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -41,6 +41,7 @@
 #include "or51132.h"
 #include "lgdt330x.h"
 #include "s5h1409.h"
+#include "xc4000.h"
 #include "xc5000.h"
 #include "nxt200x.h"
 #include "cx24123.h"
@@ -63,6 +64,7 @@ MODULE_DESCRIPTION("driver for cx2388x based DVB cards");
 MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
 
 static unsigned int debug;
 module_param(debug, int, 0644);
@@ -605,6 +607,39 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
 	return 0;
 }
 
+static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg)
+{
+	struct dvb_frontend *fe;
+	struct videobuf_dvb_frontend *fe0 = NULL;
+
+	/* Get the first frontend */
+	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
+
+	if (!fe0->dvb.frontend) {
+		printk(KERN_ERR "%s/2: dvb frontend not attached. "
+				"Can't attach xc4000\n",
+		       dev->core->name);
+		return -EINVAL;
+	}
+
+	fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, &dev->core->i2c_adap,
+			cfg);
+	if (!fe) {
+		printk(KERN_ERR "%s/2: xc4000 attach failed\n",
+		       dev->core->name);
+		dvb_frontend_detach(fe0->dvb.frontend);
+		dvb_unregister_frontend(fe0->dvb.frontend);
+		fe0->dvb.frontend = NULL;
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "%s/2: xc4000 attached\n", dev->core->name);
+
+	return 0;
+}
+
 static int cx24116_set_ts_param(struct dvb_frontend *fe,
 	int is_punctured)
 {
@@ -1294,7 +1329,25 @@ static int dvb_register(struct cx8802_dev *dev)
 				goto frontend_detach;
 		}
 		break;
-	 case CX88_BOARD_GENIATECH_X8000_MT:
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &cx88_pinnacle_hybrid_pctv,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			struct xc4000_config cfg = {
+				.i2c_address	  = 0x61,
+				.default_pm	  = 0,
+				.dvb_amplitude	  = 134,
+				.set_smoothedcvbs = 1,
+				.if_khz		  = 4560
+			};
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+			if (attach_xc4000(dev, &cfg) < 0)
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_GENIATECH_X8000_MT:
 		dev->ts_gen_cntrl = 0x00;
 
 		fe0->dvb.frontend = dvb_attach(zl10353_attach,
@@ -1577,6 +1630,11 @@ static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
 		udelay(1000);
 		break;
 
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		/* set RF input to AIR for DVB-T (GPIO 16) */
+		cx_write(MO_GP2_IO, 0x0101);
+		break;
+
 	default:
 		err = -ENODEV;
 	}
@@ -1692,14 +1750,8 @@ static struct cx8802_driver cx8802_dvb_driver = {
 
 static int __init dvb_init(void)
 {
-	printk(KERN_INFO "cx88/2: cx2388x dvb driver version %d.%d.%d loaded\n",
-	       (CX88_VERSION_CODE >> 16) & 0xff,
-	       (CX88_VERSION_CODE >>  8) & 0xff,
-	       CX88_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx88/2: cx2388x dvb driver version %s loaded\n",
+	       CX88_VERSION);
 	return cx8802_register_driver(&cx8802_dvb_driver);
 }
 
@@ -1710,10 +1762,3 @@ static void __exit dvb_fini(void)
 
 module_init(dvb_init);
 module_exit(dvb_fini);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * compile-command: "make DVB=1"
- * End:
- */
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 3f44200..e614201 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -100,6 +100,8 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
 		break;
 	case CX88_BOARD_WINFAST_DTV1000:
 	case CX88_BOARD_WINFAST_DTV1800H:
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
 	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 		gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900);
 		auxgpio = gpio;
@@ -289,6 +291,8 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	case CX88_BOARD_WINFAST_DTV2000H:
 	case CX88_BOARD_WINFAST_DTV2000H_J:
 	case CX88_BOARD_WINFAST_DTV1800H:
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
 		ir_codes = RC_MAP_WINFAST;
 		ir->gpio_addr = MO_GP0_IO;
 		ir->mask_keycode = 0x8f8;
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index 1a7b983..cd5386e 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -39,6 +39,7 @@ MODULE_AUTHOR("Jelle Foks <jelle@foks.us>");
 MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
 
 static unsigned int debug;
 module_param(debug,int,0644);
@@ -613,13 +614,17 @@ static int cx8802_request_acquire(struct cx8802_driver *drv)
 	    core->active_type_id != drv->type_id)
 		return -EBUSY;
 
-	core->input = 0;
-	for (i = 0;
-	     i < (sizeof(core->board.input) / sizeof(struct cx88_input));
-	     i++) {
-		if (core->board.input[i].type == CX88_VMUX_DVB) {
-			core->input = i;
-			break;
+	if (drv->type_id == CX88_MPEG_DVB) {
+		/* When switching to DVB, always set the input to the tuner */
+		core->last_analog_input = core->input;
+		core->input = 0;
+		for (i = 0;
+		     i < (sizeof(core->board.input) / sizeof(struct cx88_input));
+		     i++) {
+			if (core->board.input[i].type == CX88_VMUX_DVB) {
+				core->input = i;
+				break;
+			}
 		}
 	}
 
@@ -644,6 +649,12 @@ static int cx8802_request_release(struct cx8802_driver *drv)
 
 	if (drv->advise_release && --core->active_ref == 0)
 	{
+		if (drv->type_id == CX88_MPEG_DVB) {
+			/* If the DVB driver is releasing, reset the input
+			   state to the last configured analog input */
+			core->input = core->last_analog_input;
+		}
+
 		drv->advise_release(drv);
 		core->active_type_id = CX88_BOARD_NONE;
 		mpeg_dbg(1,"%s() Post release GPIO=%x\n", __func__, cx_read(MO_GP0_IO));
@@ -890,14 +901,8 @@ static struct pci_driver cx8802_pci_driver = {
 
 static int __init cx8802_init(void)
 {
-	printk(KERN_INFO "cx88/2: cx2388x MPEG-TS Driver Manager version %d.%d.%d loaded\n",
-	       (CX88_VERSION_CODE >> 16) & 0xff,
-	       (CX88_VERSION_CODE >>  8) & 0xff,
-	       CX88_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx88/2: cx2388x MPEG-TS Driver Manager version %s loaded\n",
+	       CX88_VERSION);
 	return pci_register_driver(&cx8802_pci_driver);
 }
 
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index cef4f28..60d28fd 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -45,6 +45,7 @@
 MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
 
 /* ------------------------------------------------------------------ */
 
@@ -220,7 +221,23 @@ static const struct cx88_ctrl cx8800_ctls[] = {
 		.reg                   = MO_UV_SATURATION,
 		.mask                  = 0x00ff,
 		.shift                 = 0,
-	},{
+	}, {
+		.v = {
+			.id            = V4L2_CID_SHARPNESS,
+			.name          = "Sharpness",
+			.minimum       = 0,
+			.maximum       = 4,
+			.step          = 1,
+			.default_value = 0x0,
+			.type          = V4L2_CTRL_TYPE_INTEGER,
+		},
+		.off                   = 0,
+		/* NOTE: the value is converted and written to both even
+		   and odd registers in the code */
+		.reg                   = MO_FILTER_ODD,
+		.mask                  = 7 << 7,
+		.shift                 = 7,
+	}, {
 		.v = {
 			.id            = V4L2_CID_CHROMA_AGC,
 			.name          = "Chroma AGC",
@@ -245,6 +262,20 @@ static const struct cx88_ctrl cx8800_ctls[] = {
 		.mask                  = 1 << 9,
 		.shift                 = 9,
 	}, {
+		.v = {
+			.id            = V4L2_CID_BAND_STOP_FILTER,
+			.name          = "Notch filter",
+			.minimum       = 0,
+			.maximum       = 3,
+			.step          = 1,
+			.default_value = 0x0,
+			.type          = V4L2_CTRL_TYPE_INTEGER,
+		},
+		.off                   = 0,
+		.reg                   = MO_HTOTAL,
+		.mask                  = 3 << 11,
+		.shift                 = 11,
+	}, {
 	/* --- audio --- */
 		.v = {
 			.id            = V4L2_CID_AUDIO_MUTE,
@@ -300,8 +331,10 @@ const u32 cx88_user_ctrls[] = {
 	V4L2_CID_AUDIO_VOLUME,
 	V4L2_CID_AUDIO_BALANCE,
 	V4L2_CID_AUDIO_MUTE,
+	V4L2_CID_SHARPNESS,
 	V4L2_CID_CHROMA_AGC,
 	V4L2_CID_COLOR_KILLER,
+	V4L2_CID_BAND_STOP_FILTER,
 	0
 };
 EXPORT_SYMBOL(cx88_user_ctrls);
@@ -962,6 +995,10 @@ int cx88_get_control (struct cx88_core  *core, struct v4l2_control *ctl)
 	case V4L2_CID_AUDIO_VOLUME:
 		ctl->value = 0x3f - (value & 0x3f);
 		break;
+	case V4L2_CID_SHARPNESS:
+		ctl->value = ((value & 0x0200) ? (((value & 0x0180) >> 7) + 1)
+						 : 0);
+		break;
 	default:
 		ctl->value = ((value + (c->off << c->shift)) & c->mask) >> c->shift;
 		break;
@@ -1039,6 +1076,12 @@ int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl)
 		}
 		mask=0xffff;
 		break;
+	case V4L2_CID_SHARPNESS:
+		/* 0b000, 0b100, 0b101, 0b110, or 0b111 */
+		value = (ctl->value < 1 ? 0 : ((ctl->value + 3) << 7));
+		/* needs to be set for both fields */
+		cx_andor(MO_FILTER_EVEN, mask, value);
+		break;
 	case V4L2_CID_CHROMA_AGC:
 		/* Do not allow chroma AGC to be enabled for SECAM */
 		value = ((ctl->value - c->off) << c->shift) & c->mask;
@@ -1161,7 +1204,6 @@ static int vidioc_querycap (struct file *file, void  *priv,
 	strcpy(cap->driver, "cx8800");
 	strlcpy(cap->card, core->board.name, sizeof(cap->card));
 	sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci));
-	cap->version = CX88_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_READWRITE     |
@@ -1480,7 +1522,6 @@ static int radio_querycap (struct file *file, void  *priv,
 	strcpy(cap->driver, "cx8800");
 	strlcpy(cap->card, core->board.name, sizeof(cap->card));
 	sprintf(cap->bus_info,"PCI:%s", pci_name(dev->pci));
-	cap->version = CX88_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
@@ -2139,14 +2180,8 @@ static struct pci_driver cx8800_pci_driver = {
 
 static int __init cx8800_init(void)
 {
-	printk(KERN_INFO "cx88/0: cx2388x v4l2 driver version %d.%d.%d loaded\n",
-	       (CX88_VERSION_CODE >> 16) & 0xff,
-	       (CX88_VERSION_CODE >>  8) & 0xff,
-	       CX88_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx88/0: cx2388x v4l2 driver version %s loaded\n",
+	       CX88_VERSION);
 	return pci_register_driver(&cx8800_pci_driver);
 }
 
@@ -2157,11 +2192,3 @@ static void __exit cx8800_fini(void)
 
 module_init(cx8800_init);
 module_exit(cx8800_fini);
-
-/* ----------------------------------------------------------- */
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
- */
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index a399a8b..fa8d307 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -39,9 +39,9 @@
 #include "cx88-reg.h"
 #include "tuner-xc2028.h"
 
-#include <linux/version.h>
 #include <linux/mutex.h>
-#define CX88_VERSION_CODE KERNEL_VERSION(0, 0, 8)
+
+#define CX88_VERSION "0.0.9"
 
 #define UNSET (-1U)
 
@@ -242,6 +242,8 @@ extern const struct sram_channel const cx88_sram_channels[];
 #define CX88_BOARD_SAMSUNG_SMT_7020        84
 #define CX88_BOARD_TWINHAN_VP1027_DVBS     85
 #define CX88_BOARD_TEVII_S464              86
+#define CX88_BOARD_WINFAST_DTV2000H_PLUS   87
+#define CX88_BOARD_WINFAST_DTV1800H_XC4000 88
 
 enum cx88_itype {
 	CX88_VMUX_COMPOSITE1 = 1,
@@ -375,6 +377,7 @@ struct cx88_core {
 	u32                        audiomode_manual;
 	u32                        audiomode_current;
 	u32                        input;
+	u32                        last_analog_input;
 	u32                        astat;
 	u32			   use_nicam;
 	unsigned long		   last_change;
diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig
index 6b19540..60a456e 100644
--- a/drivers/media/video/davinci/Kconfig
+++ b/drivers/media/video/davinci/Kconfig
@@ -91,3 +91,26 @@ config VIDEO_ISIF
 
 	   To compile this driver as a module, choose M here: the
 	   module will be called vpfe.
+
+config VIDEO_DM644X_VPBE
+	tristate "DM644X VPBE HW module"
+	depends on ARCH_DAVINCI_DM644x
+	select VIDEO_VPSS_SYSTEM
+	select VIDEOBUF_DMA_CONTIG
+	help
+	    Enables VPBE modules used for display on a DM644x
+	    SoC.
+
+	    To compile this driver as a module, choose M here: the
+	    module will be called vpbe.
+
+
+config VIDEO_VPBE_DISPLAY
+	tristate "VPBE V4L2 Display driver"
+	depends on ARCH_DAVINCI_DM644x
+	select VIDEO_DM644X_VPBE
+	help
+	    Enables VPBE V4L2 Display driver on a DM644x device
+
+	    To compile this driver as a module, choose M here: the
+	    module will be called vpbe_display.
diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile
index a379557..ae7dafb 100644
--- a/drivers/media/video/davinci/Makefile
+++ b/drivers/media/video/davinci/Makefile
@@ -16,3 +16,5 @@ obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o
 obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o
 obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o
 obj-$(CONFIG_VIDEO_ISIF) += isif.o
+obj-$(CONFIG_VIDEO_DM644X_VPBE) += vpbe.o vpbe_osd.o vpbe_venc.o
+obj-$(CONFIG_VIDEO_VPBE_DISPLAY) += vpbe_display.o
diff --git a/drivers/media/video/davinci/vpbe.c b/drivers/media/video/davinci/vpbe.c
new file mode 100644
index 0000000..d773d30
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe.c
@@ -0,0 +1,864 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe.h>
+#include <media/davinci/vpss.h>
+#include <media/davinci/vpbe_venc.h>
+
+#define VPBE_DEFAULT_OUTPUT	"Composite"
+#define VPBE_DEFAULT_MODE	"ntsc"
+
+static char *def_output = VPBE_DEFAULT_OUTPUT;
+static char *def_mode = VPBE_DEFAULT_MODE;
+static int debug;
+
+module_param(def_output, charp, S_IRUGO);
+module_param(def_mode, charp, S_IRUGO);
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(def_output, "vpbe output name (default:Composite)");
+MODULE_PARM_DESC(def_mode, "vpbe output mode name (default:ntsc");
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+MODULE_DESCRIPTION("TI DMXXX VPBE Display controller");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
+
+/**
+ * vpbe_current_encoder_info - Get config info for current encoder
+ * @vpbe_dev - vpbe device ptr
+ *
+ * Return ptr to current encoder config info
+ */
+static struct encoder_config_info*
+vpbe_current_encoder_info(struct vpbe_device *vpbe_dev)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int index = vpbe_dev->current_sd_index;
+
+	return ((index == 0) ? &cfg->venc :
+				&cfg->ext_encoders[index-1]);
+}
+
+/**
+ * vpbe_find_encoder_sd_index - Given a name find encoder sd index
+ *
+ * @vpbe_config - ptr to vpbe cfg
+ * @output_index - index used by application
+ *
+ * Return sd index of the encoder
+ */
+static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg,
+			     int index)
+{
+	char *encoder_name = cfg->outputs[index].subdev_name;
+	int i;
+
+	/* Venc is always first	*/
+	if (!strcmp(encoder_name, cfg->venc.module_name))
+		return 0;
+
+	for (i = 0; i < cfg->num_ext_encoders; i++) {
+		if (!strcmp(encoder_name,
+		     cfg->ext_encoders[i].module_name))
+			return i+1;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_g_cropcap - Get crop capabilities of the display
+ * @vpbe_dev - vpbe device ptr
+ * @cropcap - cropcap is a ptr to struct v4l2_cropcap
+ *
+ * Update the crop capabilities in crop cap for current
+ * mode
+ */
+static int vpbe_g_cropcap(struct vpbe_device *vpbe_dev,
+			  struct v4l2_cropcap *cropcap)
+{
+	if (NULL == cropcap)
+		return -EINVAL;
+	cropcap->bounds.left = 0;
+	cropcap->bounds.top = 0;
+	cropcap->bounds.width = vpbe_dev->current_timings.xres;
+	cropcap->bounds.height = vpbe_dev->current_timings.yres;
+	cropcap->defrect = cropcap->bounds;
+
+	return 0;
+}
+
+/**
+ * vpbe_enum_outputs - enumerate outputs
+ * @vpbe_dev - vpbe device ptr
+ * @output - ptr to v4l2_output structure
+ *
+ * Enumerates the outputs available at the vpbe display
+ * returns the status, -EINVAL if end of output list
+ */
+static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev,
+			     struct v4l2_output *output)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int temp_index = output->index;
+
+	if (temp_index >= cfg->num_outputs)
+		return -EINVAL;
+
+	*output = cfg->outputs[temp_index].output;
+	output->index = temp_index;
+
+	return 0;
+}
+
+static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	if (NULL == mode)
+		return -EINVAL;
+
+	for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if (!strcmp(mode, var.name)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev,
+				      struct vpbe_enc_mode_info *mode_info)
+{
+	if (NULL == mode_info)
+		return -EINVAL;
+
+	*mode_info = vpbe_dev->current_timings;
+
+	return 0;
+}
+
+static int vpbe_get_dv_preset_info(struct vpbe_device *vpbe_dev,
+				   unsigned int dv_preset)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if ((var.timings_type & VPBE_ENC_DV_PRESET) &&
+		  (var.timings.dv_preset == dv_preset)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/* Get std by std id */
+static int vpbe_get_std_info(struct vpbe_device *vpbe_dev,
+			     v4l2_std_id std_id)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if ((var.timings_type & VPBE_ENC_STD) &&
+		  (var.timings.std_id & std_id)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int vpbe_get_std_info_by_name(struct vpbe_device *vpbe_dev,
+				char *std_name)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if (!strcmp(var.name, std_name)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_set_output - Set output
+ * @vpbe_dev - vpbe device ptr
+ * @index - index of output
+ *
+ * Set vpbe output to the output specified by the index
+ */
+static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index)
+{
+	struct encoder_config_info *curr_enc_info =
+			vpbe_current_encoder_info(vpbe_dev);
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int enc_out_index;
+	int sd_index;
+	int ret = 0;
+
+	if (index >= cfg->num_outputs)
+		return -EINVAL;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	sd_index = vpbe_dev->current_sd_index;
+	enc_out_index = cfg->outputs[index].output.index;
+	/*
+	 * Currently we switch the encoder based on output selected
+	 * by the application. If media controller is implemented later
+	 * there is will be an API added to setup_link between venc
+	 * and external encoder. So in that case below comparison always
+	 * match and encoder will not be switched. But if application
+	 * chose not to use media controller, then this provides current
+	 * way of switching encoder at the venc output.
+	 */
+	if (strcmp(curr_enc_info->module_name,
+		   cfg->outputs[index].subdev_name)) {
+		/* Need to switch the encoder at the output */
+		sd_index = vpbe_find_encoder_sd_index(cfg, index);
+		if (sd_index < 0) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (ret)
+			goto out;
+	}
+
+	/* Set output at the encoder */
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+				       s_routing, 0, enc_out_index, 0);
+	if (ret)
+		goto out;
+
+	/*
+	 * It is assumed that venc or extenal encoder will set a default
+	 * mode in the sub device. For external encoder or LCD pannel output,
+	 * we also need to set up the lcd port for the required mode. So setup
+	 * the lcd port for the default mode that is configured in the board
+	 * arch/arm/mach-davinci/board-dm355-evm.setup file for the external
+	 * encoder.
+	 */
+	ret = vpbe_get_mode_info(vpbe_dev,
+				 cfg->outputs[index].default_mode);
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+			vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+		vpbe_dev->current_sd_index = sd_index;
+		vpbe_dev->current_out_index = index;
+	}
+out:
+	mutex_unlock(&vpbe_dev->lock);
+	return ret;
+}
+
+static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < cfg->num_outputs; i++) {
+		if (!strcmp(def_output,
+			    cfg->outputs[i].output.name)) {
+			ret = vpbe_set_output(vpbe_dev, i);
+			if (!ret)
+				vpbe_dev->current_out_index = i;
+			return ret;
+		}
+	}
+	return ret;
+}
+
+/**
+ * vpbe_get_output - Get output
+ * @vpbe_dev - vpbe device ptr
+ *
+ * return current vpbe output to the the index
+ */
+static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
+{
+	return vpbe_dev->current_out_index;
+}
+
+/**
+ * vpbe_s_dv_preset - Set the given preset timings in the encoder
+ *
+ * Sets the preset if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_s_dv_preset(struct vpbe_device *vpbe_dev,
+		     struct v4l2_dv_preset *dv_preset)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	int sd_index = vpbe_dev->current_sd_index;
+	int ret;
+
+
+	if (!(cfg->outputs[out_index].output.capabilities &
+	    V4L2_OUT_CAP_PRESETS))
+		return -EINVAL;
+
+	ret = vpbe_get_dv_preset_info(vpbe_dev, dv_preset->preset);
+
+	if (ret)
+		return ret;
+
+	mutex_lock(&vpbe_dev->lock);
+
+
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+					s_dv_preset, dv_preset);
+	/* set the lcd controller output for the given mode */
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+	}
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+/**
+ * vpbe_g_dv_preset - Get the preset in the current encoder
+ *
+ * Get the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_g_dv_preset(struct vpbe_device *vpbe_dev,
+		     struct v4l2_dv_preset *dv_preset)
+{
+	if (vpbe_dev->current_timings.timings_type &
+	  VPBE_ENC_DV_PRESET) {
+		dv_preset->preset = vpbe_dev->current_timings.timings.dv_preset;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_enum_dv_presets - Enumerate the dv presets in the current encoder
+ *
+ * Get the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_enum_dv_presets(struct vpbe_device *vpbe_dev,
+			 struct v4l2_dv_enum_preset *preset_info)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	struct vpbe_output *output = &cfg->outputs[out_index];
+	int j = 0;
+	int i;
+
+	if (!(output->output.capabilities & V4L2_OUT_CAP_PRESETS))
+		return -EINVAL;
+
+	for (i = 0; i < output->num_modes; i++) {
+		if (output->modes[i].timings_type == VPBE_ENC_DV_PRESET) {
+			if (j == preset_info->index)
+				break;
+			j++;
+		}
+	}
+
+	if (i == output->num_modes)
+		return -EINVAL;
+
+	return v4l_fill_dv_preset_info(output->modes[i].timings.dv_preset,
+					preset_info);
+}
+
+/**
+ * vpbe_s_std - Set the given standard in the encoder
+ *
+ * Sets the standard if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_s_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	int sd_index = vpbe_dev->current_sd_index;
+	int ret;
+
+	if (!(cfg->outputs[out_index].output.capabilities &
+		V4L2_OUT_CAP_STD))
+		return -EINVAL;
+
+	ret = vpbe_get_std_info(vpbe_dev, *std_id);
+	if (ret)
+		return ret;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+			       s_std_output, *std_id);
+	/* set the lcd controller output for the given mode */
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+	}
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+/**
+ * vpbe_g_std - Get the standard in the current encoder
+ *
+ * Get the standard in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_g_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id)
+{
+	struct vpbe_enc_mode_info cur_timings = vpbe_dev->current_timings;
+
+	if (cur_timings.timings_type & VPBE_ENC_STD) {
+		*std_id = cur_timings.timings.std_id;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_set_mode - Set mode in the current encoder using mode info
+ *
+ * Use the mode string to decide what timings to set in the encoder
+ * This is typically useful when fbset command is used to change the current
+ * timings by specifying a string to indicate the timings.
+ */
+static int vpbe_set_mode(struct vpbe_device *vpbe_dev,
+			 struct vpbe_enc_mode_info *mode_info)
+{
+	struct vpbe_enc_mode_info *preset_mode = NULL;
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct v4l2_dv_preset dv_preset;
+	struct osd_state *osd_device;
+	int out_index = vpbe_dev->current_out_index;
+	int ret = 0;
+	int i;
+
+	if ((NULL == mode_info) || (NULL == mode_info->name))
+		return -EINVAL;
+
+	for (i = 0; i < cfg->outputs[out_index].num_modes; i++) {
+		if (!strcmp(mode_info->name,
+		     cfg->outputs[out_index].modes[i].name)) {
+			preset_mode = &cfg->outputs[out_index].modes[i];
+			/*
+			 * it may be one of the 3 timings type. Check and
+			 * invoke right API
+			 */
+			if (preset_mode->timings_type & VPBE_ENC_STD)
+				return vpbe_s_std(vpbe_dev,
+						 &preset_mode->timings.std_id);
+			if (preset_mode->timings_type & VPBE_ENC_DV_PRESET) {
+				dv_preset.preset =
+					preset_mode->timings.dv_preset;
+				return vpbe_s_dv_preset(vpbe_dev, &dv_preset);
+			}
+		}
+	}
+
+	/* Only custom timing should reach here */
+	if (preset_mode == NULL)
+		return -EINVAL;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	osd_device = vpbe_dev->osd_device;
+	vpbe_dev->current_timings = *preset_mode;
+	osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+	osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev)
+{
+	int ret;
+
+	ret = vpbe_get_std_info_by_name(vpbe_dev, def_mode);
+	if (ret)
+		return ret;
+
+	/* set the default mode in the encoder */
+	return vpbe_set_mode(vpbe_dev, &vpbe_dev->current_timings);
+}
+
+static int platform_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vpbe_device *vpbe_dev = data;
+
+	if (strcmp("vpbe-osd", pdev->name) == 0)
+		vpbe_dev->osd_device = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+/**
+ * vpbe_initialize() - Initialize the vpbe display controller
+ * @vpbe_dev - vpbe device ptr
+ *
+ * Master frame buffer device drivers calls this to initialize vpbe
+ * display controller. This will then registers v4l2 device and the sub
+ * devices and sets a current encoder sub device for display. v4l2 display
+ * device driver is the master and frame buffer display device driver is
+ * the slave. Frame buffer display driver checks the initialized during
+ * probe and exit if not initialized. Returns status.
+ */
+static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
+{
+	struct encoder_config_info *enc_info;
+	struct v4l2_subdev **enc_subdev;
+	struct osd_state *osd_device;
+	struct i2c_adapter *i2c_adap;
+	int output_index;
+	int num_encoders;
+	int ret = 0;
+	int err;
+	int i;
+
+	/*
+	 * v4l2 abd FBDev frame buffer devices will get the vpbe_dev pointer
+	 * from the platform device by iteration of platform drivers and
+	 * matching with device name
+	 */
+	if (NULL == vpbe_dev || NULL == dev) {
+		printk(KERN_ERR "Null device pointers.\n");
+		return -ENODEV;
+	}
+
+	if (vpbe_dev->initialized)
+		return 0;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
+		/* We have dac clock available for platform */
+		vpbe_dev->dac_clk = clk_get(vpbe_dev->pdev, "vpss_dac");
+		if (IS_ERR(vpbe_dev->dac_clk)) {
+			ret =  PTR_ERR(vpbe_dev->dac_clk);
+			goto vpbe_unlock;
+		}
+		if (clk_enable(vpbe_dev->dac_clk)) {
+			ret =  -ENODEV;
+			goto vpbe_unlock;
+		}
+	}
+
+	/* first enable vpss clocks */
+	vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
+
+	/* First register a v4l2 device */
+	ret = v4l2_device_register(dev, &vpbe_dev->v4l2_dev);
+	if (ret) {
+		v4l2_err(dev->driver,
+			"Unable to register v4l2 device.\n");
+		goto vpbe_fail_clock;
+	}
+	v4l2_info(&vpbe_dev->v4l2_dev, "vpbe v4l2 device registered\n");
+
+	err = bus_for_each_dev(&platform_bus_type, NULL, vpbe_dev,
+			       platform_device_get);
+	if (err < 0)
+		return err;
+
+	vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev,
+					   vpbe_dev->cfg->venc.module_name);
+	/* register venc sub device */
+	if (vpbe_dev->venc == NULL) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"vpbe unable to init venc sub device\n");
+		ret = -ENODEV;
+		goto vpbe_fail_v4l2_device;
+	}
+	/* initialize osd device */
+	osd_device = vpbe_dev->osd_device;
+
+	if (NULL != osd_device->ops.initialize) {
+		err = osd_device->ops.initialize(osd_device);
+		if (err) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				 "unable to initialize the OSD device");
+			err = -ENOMEM;
+			goto vpbe_fail_v4l2_device;
+		}
+	}
+
+	/*
+	 * Register any external encoders that are configured. At index 0 we
+	 * store venc sd index.
+	 */
+	num_encoders = vpbe_dev->cfg->num_ext_encoders + 1;
+	vpbe_dev->encoders = kmalloc(
+				sizeof(struct v4l2_subdev *)*num_encoders,
+				GFP_KERNEL);
+	if (NULL == vpbe_dev->encoders) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"unable to allocate memory for encoders sub devices");
+		ret = -ENOMEM;
+		goto vpbe_fail_v4l2_device;
+	}
+
+	i2c_adap = i2c_get_adapter(vpbe_dev->cfg->i2c_adapter_id);
+	for (i = 0; i < (vpbe_dev->cfg->num_ext_encoders + 1); i++) {
+		if (i == 0) {
+			/* venc is at index 0 */
+			enc_subdev = &vpbe_dev->encoders[i];
+			*enc_subdev = vpbe_dev->venc;
+			continue;
+		}
+		enc_info = &vpbe_dev->cfg->ext_encoders[i];
+		if (enc_info->is_i2c) {
+			enc_subdev = &vpbe_dev->encoders[i];
+			*enc_subdev = v4l2_i2c_new_subdev_board(
+						&vpbe_dev->v4l2_dev, i2c_adap,
+						&enc_info->board_info, NULL);
+			if (*enc_subdev)
+				v4l2_info(&vpbe_dev->v4l2_dev,
+					  "v4l2 sub device %s registered\n",
+					  enc_info->module_name);
+			else {
+				v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s"
+					 " failed to register",
+					 enc_info->module_name);
+				ret = -ENODEV;
+				goto vpbe_fail_sd_register;
+			}
+		} else
+			v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders"
+				 " currently not supported");
+	}
+
+	/* set the current encoder and output to that of venc by default */
+	vpbe_dev->current_sd_index = 0;
+	vpbe_dev->current_out_index = 0;
+	output_index = 0;
+
+	mutex_unlock(&vpbe_dev->lock);
+
+	printk(KERN_NOTICE "Setting default output to %s\n", def_output);
+	ret = vpbe_set_default_output(vpbe_dev);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s",
+			 def_output);
+		return ret;
+	}
+
+	printk(KERN_NOTICE "Setting default mode to %s\n", def_mode);
+	ret = vpbe_set_default_mode(vpbe_dev);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s",
+			 def_mode);
+		return ret;
+	}
+	vpbe_dev->initialized = 1;
+	/* TBD handling of bootargs for default output and mode */
+	return 0;
+
+vpbe_fail_sd_register:
+	kfree(vpbe_dev->encoders);
+vpbe_fail_v4l2_device:
+	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
+vpbe_fail_clock:
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0)
+		clk_put(vpbe_dev->dac_clk);
+vpbe_unlock:
+	mutex_unlock(&vpbe_dev->lock);
+	return ret;
+}
+
+/**
+ * vpbe_deinitialize() - de-initialize the vpbe display controller
+ * @dev - Master and slave device ptr
+ *
+ * vpbe_master and slave frame buffer devices calls this to de-initialize
+ * the display controller. It is called when master and slave device
+ * driver modules are removed and no longer requires the display controller.
+ */
+static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev)
+{
+	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0)
+		clk_put(vpbe_dev->dac_clk);
+
+	kfree(vpbe_dev->encoders);
+	vpbe_dev->initialized = 0;
+	/* disable vpss clocks */
+	vpss_enable_clock(VPSS_VPBE_CLOCK, 0);
+}
+
+static struct vpbe_device_ops vpbe_dev_ops = {
+	.g_cropcap = vpbe_g_cropcap,
+	.enum_outputs = vpbe_enum_outputs,
+	.set_output = vpbe_set_output,
+	.get_output = vpbe_get_output,
+	.s_dv_preset = vpbe_s_dv_preset,
+	.g_dv_preset = vpbe_g_dv_preset,
+	.enum_dv_presets = vpbe_enum_dv_presets,
+	.s_std = vpbe_s_std,
+	.g_std = vpbe_g_std,
+	.initialize = vpbe_initialize,
+	.deinitialize = vpbe_deinitialize,
+	.get_mode_info = vpbe_get_current_mode_info,
+	.set_mode = vpbe_set_mode,
+};
+
+static __devinit int vpbe_probe(struct platform_device *pdev)
+{
+	struct vpbe_device *vpbe_dev;
+	struct vpbe_config *cfg;
+	int ret = -EINVAL;
+
+	if (pdev->dev.platform_data == NULL) {
+		v4l2_err(pdev->dev.driver, "No platform data\n");
+		return -ENODEV;
+	}
+	cfg = pdev->dev.platform_data;
+
+	if (!cfg->module_name[0] ||
+	    !cfg->osd.module_name[0] ||
+	    !cfg->venc.module_name[0]) {
+		v4l2_err(pdev->dev.driver, "vpbe display module names not"
+			 " defined\n");
+		return ret;
+	}
+
+	vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL);
+	if (vpbe_dev == NULL) {
+		v4l2_err(pdev->dev.driver, "Unable to allocate memory"
+			 " for vpbe_device\n");
+		return -ENOMEM;
+	}
+	vpbe_dev->cfg = cfg;
+	vpbe_dev->ops = vpbe_dev_ops;
+	vpbe_dev->pdev = &pdev->dev;
+
+	if (cfg->outputs->num_modes > 0)
+		vpbe_dev->current_timings = vpbe_dev->cfg->outputs[0].modes[0];
+	else
+		return -ENODEV;
+
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, vpbe_dev);
+	mutex_init(&vpbe_dev->lock);
+
+	return 0;
+}
+
+static int vpbe_remove(struct platform_device *device)
+{
+	struct vpbe_device *vpbe_dev = platform_get_drvdata(device);
+
+	kfree(vpbe_dev);
+
+	return 0;
+}
+
+static struct platform_driver vpbe_driver = {
+	.driver	= {
+		.name	= "vpbe_controller",
+		.owner	= THIS_MODULE,
+	},
+	.probe = vpbe_probe,
+	.remove = vpbe_remove,
+};
+
+/**
+ * vpbe_init: initialize the vpbe driver
+ *
+ * This function registers device and driver to the kernel
+ */
+static __init int vpbe_init(void)
+{
+	return platform_driver_register(&vpbe_driver);
+}
+
+/**
+ * vpbe_cleanup : cleanup function for vpbe driver
+ *
+ * This will un-registers the device and driver to the kernel
+ */
+static void vpbe_cleanup(void)
+{
+	platform_driver_unregister(&vpbe_driver);
+}
+
+/* Function for module initialization and cleanup */
+module_init(vpbe_init);
+module_exit(vpbe_cleanup);
diff --git a/drivers/media/video/davinci/vpbe_display.c b/drivers/media/video/davinci/vpbe_display.c
new file mode 100644
index 0000000..7f1d83a
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_display.c
@@ -0,0 +1,1860 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+
+#include <asm/pgtable.h>
+#include <mach/cputype.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_display.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpbe_osd.h>
+#include "vpbe_venc_regs.h"
+
+#define VPBE_DISPLAY_DRIVER "vpbe-v4l2"
+
+static int debug;
+
+#define VPBE_DISPLAY_SD_BUF_SIZE (720*576*2)
+#define VPBE_DEFAULT_NUM_BUFS 3
+
+module_param(debug, int, 0644);
+
+static int venc_is_second_field(struct vpbe_display *disp_dev)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int ret;
+	int val;
+
+	ret = v4l2_subdev_call(vpbe_dev->venc,
+			       core,
+			       ioctl,
+			       VENC_GET_FLD,
+			       &val);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			 "Error in getting Field ID 0\n");
+	}
+	return val;
+}
+
+static void vpbe_isr_even_field(struct vpbe_display *disp_obj,
+				struct vpbe_layer *layer)
+{
+	struct timespec timevalue;
+
+	if (layer->cur_frm == layer->next_frm)
+		return;
+	ktime_get_ts(&timevalue);
+	layer->cur_frm->ts.tv_sec = timevalue.tv_sec;
+	layer->cur_frm->ts.tv_usec = timevalue.tv_nsec / NSEC_PER_USEC;
+	layer->cur_frm->state = VIDEOBUF_DONE;
+	wake_up_interruptible(&layer->cur_frm->done);
+	/* Make cur_frm pointing to next_frm */
+	layer->cur_frm = layer->next_frm;
+}
+
+static void vpbe_isr_odd_field(struct vpbe_display *disp_obj,
+				struct vpbe_layer *layer)
+{
+	struct osd_state *osd_device = disp_obj->osd_device;
+	unsigned long addr;
+
+	spin_lock(&disp_obj->dma_queue_lock);
+	if (list_empty(&layer->dma_queue) ||
+		(layer->cur_frm != layer->next_frm)) {
+		spin_unlock(&disp_obj->dma_queue_lock);
+		return;
+	}
+	/*
+	 * one field is displayed configure
+	 * the next frame if it is available
+	 * otherwise hold on current frame
+	 * Get next from the buffer queue
+	 */
+	layer->next_frm = list_entry(
+				layer->dma_queue.next,
+				struct  videobuf_buffer,
+				queue);
+	/* Remove that from the buffer queue */
+	list_del(&layer->next_frm->queue);
+	spin_unlock(&disp_obj->dma_queue_lock);
+	/* Mark state of the frame to active */
+	layer->next_frm->state = VIDEOBUF_ACTIVE;
+	addr = videobuf_to_dma_contig(layer->next_frm);
+	osd_device->ops.start_layer(osd_device,
+			layer->layer_info.id,
+			addr,
+			disp_obj->cbcr_ofst);
+}
+
+/* interrupt service routine */
+static irqreturn_t venc_isr(int irq, void *arg)
+{
+	struct vpbe_display *disp_dev = (struct vpbe_display *)arg;
+	struct vpbe_layer *layer;
+	static unsigned last_event;
+	unsigned event = 0;
+	int fid;
+	int i;
+
+	if ((NULL == arg) || (NULL == disp_dev->dev[0]))
+		return IRQ_HANDLED;
+
+	if (venc_is_second_field(disp_dev))
+		event |= VENC_SECOND_FIELD;
+	else
+		event |= VENC_FIRST_FIELD;
+
+	if (event == (last_event & ~VENC_END_OF_FRAME)) {
+		/*
+		* If the display is non-interlaced, then we need to flag the
+		* end-of-frame event at every interrupt regardless of the
+		* value of the FIDST bit.  We can conclude that the display is
+		* non-interlaced if the value of the FIDST bit is unchanged
+		* from the previous interrupt.
+		*/
+		event |= VENC_END_OF_FRAME;
+	} else if (event == VENC_SECOND_FIELD) {
+		/* end-of-frame for interlaced display */
+		event |= VENC_END_OF_FRAME;
+	}
+	last_event = event;
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		layer = disp_dev->dev[i];
+		/* If streaming is started in this layer */
+		if (!layer->started)
+			continue;
+
+		if (layer->layer_first_int) {
+			layer->layer_first_int = 0;
+			continue;
+		}
+		/* Check the field format */
+		if ((V4L2_FIELD_NONE == layer->pix_fmt.field) &&
+			(event & VENC_END_OF_FRAME)) {
+			/* Progressive mode */
+
+			vpbe_isr_even_field(disp_dev, layer);
+			vpbe_isr_odd_field(disp_dev, layer);
+		} else {
+		/* Interlaced mode */
+
+			layer->field_id ^= 1;
+			if (event & VENC_FIRST_FIELD)
+				fid = 0;
+			else
+				fid = 1;
+
+			/*
+			* If field id does not match with store
+			* field id
+			*/
+			if (fid != layer->field_id) {
+				/* Make them in sync */
+				layer->field_id = fid;
+				continue;
+			}
+			/*
+			* device field id and local field id are
+			* in sync. If this is even field
+			*/
+			if (0 == fid)
+				vpbe_isr_even_field(disp_dev, layer);
+			else  /* odd field */
+				vpbe_isr_odd_field(disp_dev, layer);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * vpbe_buffer_prepare()
+ * This is the callback function called from videobuf_qbuf() function
+ * the buffer is prepared and user space virtual address is converted into
+ * physical address
+ */
+static int vpbe_buffer_prepare(struct videobuf_queue *q,
+				  struct videobuf_buffer *vb,
+				  enum v4l2_field field)
+{
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned long addr;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+				"vpbe_buffer_prepare\n");
+
+	/* If buffer is not initialized, initialize it */
+	if (VIDEOBUF_NEEDS_INIT == vb->state) {
+		vb->width = layer->pix_fmt.width;
+		vb->height = layer->pix_fmt.height;
+		vb->size = layer->pix_fmt.sizeimage;
+		vb->field = field;
+
+		ret = videobuf_iolock(q, vb, NULL);
+		if (ret < 0) {
+			v4l2_err(&vpbe_dev->v4l2_dev, "Failed to map \
+				user address\n");
+			return -EINVAL;
+		}
+
+		addr = videobuf_to_dma_contig(vb);
+
+		if (q->streaming) {
+			if (!IS_ALIGNED(addr, 8)) {
+				v4l2_err(&vpbe_dev->v4l2_dev,
+					"buffer_prepare:offset is \
+					not aligned to 32 bytes\n");
+				return -EINVAL;
+			}
+		}
+		vb->state = VIDEOBUF_PREPARED;
+	}
+	return 0;
+}
+
+/*
+ * vpbe_buffer_setup()
+ * This function allocates memory for the buffers
+ */
+static int vpbe_buffer_setup(struct videobuf_queue *q,
+				unsigned int *count,
+				unsigned int *size)
+{
+	/* Get the file handle object and layer object */
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n");
+
+	*size = layer->pix_fmt.sizeimage;
+
+	/* Store number of buffers allocated in numbuffer member */
+	if (*count < VPBE_DEFAULT_NUM_BUFS)
+		*count = layer->numbuffers = VPBE_DEFAULT_NUM_BUFS;
+
+	return 0;
+}
+
+/*
+ * vpbe_buffer_queue()
+ * This function adds the buffer to DMA queue
+ */
+static void vpbe_buffer_queue(struct videobuf_queue *q,
+				 struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and layer object */
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe_buffer_queue\n");
+
+	/* add the buffer to the DMA queue */
+	spin_lock_irqsave(&disp->dma_queue_lock, flags);
+	list_add_tail(&vb->queue, &layer->dma_queue);
+	spin_unlock_irqrestore(&disp->dma_queue_lock, flags);
+	/* Change state of the buffer */
+	vb->state = VIDEOBUF_QUEUED;
+}
+
+/*
+ * vpbe_buffer_release()
+ * This function is called from the videobuf layer to free memory allocated to
+ * the buffers
+ */
+static void vpbe_buffer_release(struct videobuf_queue *q,
+				   struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and layer object */
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe_buffer_release\n");
+
+	if (V4L2_MEMORY_USERPTR != layer->memory)
+		videobuf_dma_contig_free(q, vb);
+
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops video_qops = {
+	.buf_setup = vpbe_buffer_setup,
+	.buf_prepare = vpbe_buffer_prepare,
+	.buf_queue = vpbe_buffer_queue,
+	.buf_release = vpbe_buffer_release,
+};
+
+static
+struct vpbe_layer*
+_vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer)
+{
+	enum vpbe_display_device_id thiswin, otherwin;
+	thiswin = layer->device_id;
+
+	otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ?
+	VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0;
+	return disp_dev->dev[otherwin];
+}
+
+static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer)
+{
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	unsigned long addr;
+	int ret;
+
+	addr = videobuf_to_dma_contig(layer->cur_frm);
+	/* Set address in the display registers */
+	osd_device->ops.start_layer(osd_device,
+				    layer->layer_info.id,
+				    addr,
+				    disp_dev->cbcr_ofst);
+
+	ret = osd_device->ops.enable_layer(osd_device,
+				layer->layer_info.id, 0);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Error in enabling osd window layer 0\n");
+		return -1;
+	}
+
+	/* Enable the window */
+	layer->layer_info.enable = 1;
+	if (cfg->pixfmt == PIXFMT_NV12) {
+		struct vpbe_layer *otherlayer =
+			_vpbe_display_get_other_win_layer(disp_dev, layer);
+
+		ret = osd_device->ops.enable_layer(osd_device,
+				otherlayer->layer_info.id, 1);
+		if (ret < 0) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				"Error in enabling osd window layer 1\n");
+			return -1;
+		}
+		otherlayer->layer_info.enable = 1;
+	}
+	return 0;
+}
+
+static void
+vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer,
+			int expected_xsize, int expected_ysize)
+{
+	struct display_layer_info *layer_info = &layer->layer_info;
+	struct v4l2_pix_format *pixfmt = &layer->pix_fmt;
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int calculated_xsize;
+	int h_exp = 0;
+	int v_exp = 0;
+	int h_scale;
+	int v_scale;
+
+	v4l2_std_id standard_id = vpbe_dev->current_timings.timings.std_id;
+
+	/*
+	 * Application initially set the image format. Current display
+	 * size is obtained from the vpbe display controller. expected_xsize
+	 * and expected_ysize are set through S_CROP ioctl. Based on this,
+	 * driver will calculate the scale factors for vertical and
+	 * horizontal direction so that the image is displayed scaled
+	 * and expanded. Application uses expansion to display the image
+	 * in a square pixel. Otherwise it is displayed using displays
+	 * pixel aspect ratio.It is expected that application chooses
+	 * the crop coordinates for cropped or scaled display. if crop
+	 * size is less than the image size, it is displayed cropped or
+	 * it is displayed scaled and/or expanded.
+	 *
+	 * to begin with, set the crop window same as expected. Later we
+	 * will override with scaled window size
+	 */
+
+	cfg->xsize = pixfmt->width;
+	cfg->ysize = pixfmt->height;
+	layer_info->h_zoom = ZOOM_X1;	/* no horizontal zoom */
+	layer_info->v_zoom = ZOOM_X1;	/* no horizontal zoom */
+	layer_info->h_exp = H_EXP_OFF;	/* no horizontal zoom */
+	layer_info->v_exp = V_EXP_OFF;	/* no horizontal zoom */
+
+	if (pixfmt->width < expected_xsize) {
+		h_scale = vpbe_dev->current_timings.xres / pixfmt->width;
+		if (h_scale < 2)
+			h_scale = 1;
+		else if (h_scale >= 4)
+			h_scale = 4;
+		else
+			h_scale = 2;
+		cfg->xsize *= h_scale;
+		if (cfg->xsize < expected_xsize) {
+			if ((standard_id & V4L2_STD_525_60) ||
+			(standard_id & V4L2_STD_625_50)) {
+				calculated_xsize = (cfg->xsize *
+					VPBE_DISPLAY_H_EXP_RATIO_N) /
+					VPBE_DISPLAY_H_EXP_RATIO_D;
+				if (calculated_xsize <= expected_xsize) {
+					h_exp = 1;
+					cfg->xsize = calculated_xsize;
+				}
+			}
+		}
+		if (h_scale == 2)
+			layer_info->h_zoom = ZOOM_X2;
+		else if (h_scale == 4)
+			layer_info->h_zoom = ZOOM_X4;
+		if (h_exp)
+			layer_info->h_exp = H_EXP_9_OVER_8;
+	} else {
+		/* no scaling, only cropping. Set display area to crop area */
+		cfg->xsize = expected_xsize;
+	}
+
+	if (pixfmt->height < expected_ysize) {
+		v_scale = expected_ysize / pixfmt->height;
+		if (v_scale < 2)
+			v_scale = 1;
+		else if (v_scale >= 4)
+			v_scale = 4;
+		else
+			v_scale = 2;
+		cfg->ysize *= v_scale;
+		if (cfg->ysize < expected_ysize) {
+			if ((standard_id & V4L2_STD_625_50)) {
+				calculated_xsize = (cfg->ysize *
+					VPBE_DISPLAY_V_EXP_RATIO_N) /
+					VPBE_DISPLAY_V_EXP_RATIO_D;
+				if (calculated_xsize <= expected_ysize) {
+					v_exp = 1;
+					cfg->ysize = calculated_xsize;
+				}
+			}
+		}
+		if (v_scale == 2)
+			layer_info->v_zoom = ZOOM_X2;
+		else if (v_scale == 4)
+			layer_info->v_zoom = ZOOM_X4;
+		if (v_exp)
+			layer_info->h_exp = V_EXP_6_OVER_5;
+	} else {
+		/* no scaling, only cropping. Set display area to crop area */
+		cfg->ysize = expected_ysize;
+	}
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"crop display xsize = %d, ysize = %d\n",
+		cfg->xsize, cfg->ysize);
+}
+
+static void vpbe_disp_adj_position(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer,
+			int top, int left)
+{
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+
+	cfg->xpos = min((unsigned int)left,
+			vpbe_dev->current_timings.xres - cfg->xsize);
+	cfg->ypos = min((unsigned int)top,
+			vpbe_dev->current_timings.yres - cfg->ysize);
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"new xpos = %d, ypos = %d\n",
+		cfg->xpos, cfg->ypos);
+}
+
+static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev,
+			struct v4l2_rect *c)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+
+	if ((c->width == 0) ||
+	  ((c->width + c->left) > vpbe_dev->current_timings.xres))
+		c->width = vpbe_dev->current_timings.xres - c->left;
+
+	if ((c->height == 0) || ((c->height + c->top) >
+	  vpbe_dev->current_timings.yres))
+		c->height = vpbe_dev->current_timings.yres - c->top;
+
+	/* window height must be even for interlaced display */
+	if (vpbe_dev->current_timings.interlaced)
+		c->height &= (~0x01);
+
+}
+
+/**
+ * vpbe_try_format()
+ * If user application provides width and height, and have bytesperline set
+ * to zero, driver calculates bytesperline and sizeimage based on hardware
+ * limits.
+ */
+static int vpbe_try_format(struct vpbe_display *disp_dev,
+			struct v4l2_pix_format *pixfmt, int check)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int min_height = 1;
+	int min_width = 32;
+	int max_height;
+	int max_width;
+	int bpp;
+
+	if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) &&
+	    (pixfmt->pixelformat != V4L2_PIX_FMT_NV12))
+		/* choose default as V4L2_PIX_FMT_UYVY */
+		pixfmt->pixelformat = V4L2_PIX_FMT_UYVY;
+
+	/* Check the field format */
+	if ((pixfmt->field != V4L2_FIELD_INTERLACED) &&
+		(pixfmt->field != V4L2_FIELD_NONE)) {
+		if (vpbe_dev->current_timings.interlaced)
+			pixfmt->field = V4L2_FIELD_INTERLACED;
+		else
+			pixfmt->field = V4L2_FIELD_NONE;
+	}
+
+	if (pixfmt->field == V4L2_FIELD_INTERLACED)
+		min_height = 2;
+
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		bpp = 1;
+	else
+		bpp = 2;
+
+	max_width = vpbe_dev->current_timings.xres;
+	max_height = vpbe_dev->current_timings.yres;
+
+	min_width /= bpp;
+
+	if (!pixfmt->width || (pixfmt->width < min_width) ||
+		(pixfmt->width > max_width)) {
+		pixfmt->width = vpbe_dev->current_timings.xres;
+	}
+
+	if (!pixfmt->height || (pixfmt->height  < min_height) ||
+		(pixfmt->height  > max_height)) {
+		pixfmt->height = vpbe_dev->current_timings.yres;
+	}
+
+	if (pixfmt->bytesperline < (pixfmt->width * bpp))
+		pixfmt->bytesperline = pixfmt->width * bpp;
+
+	/* Make the bytesperline 32 byte aligned */
+	pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31);
+
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height +
+				(pixfmt->bytesperline * pixfmt->height >> 1);
+	else
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
+
+	return 0;
+}
+
+static int vpbe_display_g_priority(struct file *file, void *priv,
+				enum v4l2_priority *p)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+
+	*p = v4l2_prio_max(&layer->prio);
+
+	return 0;
+}
+
+static int vpbe_display_s_priority(struct file *file, void *priv,
+				enum v4l2_priority p)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	int ret;
+
+	ret = v4l2_prio_change(&layer->prio, &fh->prio, p);
+
+	return ret;
+}
+
+static int vpbe_display_querycap(struct file *file, void  *priv,
+			       struct v4l2_capability *cap)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	cap->version = VPBE_DISPLAY_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
+	strlcpy(cap->driver, VPBE_DISPLAY_DRIVER, sizeof(cap->driver));
+	strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info));
+	strlcpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card));
+
+	return 0;
+}
+
+static int vpbe_display_s_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	struct v4l2_rect *rect = &crop->c;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_S_CROP, layer id = %d\n", layer->device_id);
+
+	if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	if (rect->top < 0)
+		rect->top = 0;
+	if (rect->left < 0)
+		rect->left = 0;
+
+	vpbe_disp_check_window_params(disp_dev, rect);
+
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+
+	vpbe_disp_calculate_scale_factor(disp_dev, layer,
+					rect->width,
+					rect->height);
+	vpbe_disp_adj_position(disp_dev, layer, rect->top,
+					rect->left);
+	ret = osd_device->ops.set_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Error in set layer config:\n");
+		return -EINVAL;
+	}
+
+	/* apply zooming and h or v expansion */
+	osd_device->ops.set_zoom(osd_device,
+			layer->layer_info.id,
+			layer->layer_info.h_zoom,
+			layer->layer_info.v_zoom);
+	ret = osd_device->ops.set_vid_expansion(osd_device,
+			layer->layer_info.h_exp,
+			layer->layer_info.v_exp);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+		"Error in set vid expansion:\n");
+		return -EINVAL;
+	}
+
+	if ((layer->layer_info.h_zoom != ZOOM_X1) ||
+		(layer->layer_info.v_zoom != ZOOM_X1) ||
+		(layer->layer_info.h_exp != H_EXP_OFF) ||
+		(layer->layer_info.v_exp != V_EXP_OFF))
+		/* Enable expansion filter */
+		osd_device->ops.set_interpolation_filter(osd_device, 1);
+	else
+		osd_device->ops.set_interpolation_filter(osd_device, 0);
+
+	return 0;
+}
+
+static int vpbe_display_g_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct osd_state *osd_device = fh->disp_dev->osd_device;
+	struct v4l2_rect *rect = &crop->c;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_G_CROP, layer id = %d\n",
+			layer->device_id);
+
+	if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
+		ret = -EINVAL;
+	}
+	osd_device->ops.get_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	rect->top = cfg->ypos;
+	rect->left = cfg->xpos;
+	rect->width = cfg->xsize;
+	rect->height = cfg->ysize;
+
+	return 0;
+}
+
+static int vpbe_display_cropcap(struct file *file, void *priv,
+			      struct v4l2_cropcap *cropcap)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n");
+
+	cropcap->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	cropcap->bounds.left = 0;
+	cropcap->bounds.top = 0;
+	cropcap->bounds.width = vpbe_dev->current_timings.xres;
+	cropcap->bounds.height = vpbe_dev->current_timings.yres;
+	cropcap->pixelaspect = vpbe_dev->current_timings.aspect;
+	cropcap->defrect = cropcap->bounds;
+	return 0;
+}
+
+static int vpbe_display_g_fmt(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_G_FMT, layer id = %d\n",
+			layer->device_id);
+
+	/* If buffer type is video output */
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+	/* Fill in the information about format */
+	fmt->fmt.pix = layer->pix_fmt;
+
+	return 0;
+}
+
+static int vpbe_display_enum_fmt(struct file *file, void  *priv,
+				   struct v4l2_fmtdesc *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned int index = 0;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+				"VIDIOC_ENUM_FMT, layer id = %d\n",
+				layer->device_id);
+	if (fmt->index > 1) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n");
+		return -EINVAL;
+	}
+
+	/* Fill in the information about format */
+	index = fmt->index;
+	memset(fmt, 0, sizeof(*fmt));
+	fmt->index = index;
+	fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	if (index == 0) {
+		strcpy(fmt->description, "YUV 4:2:2 - UYVY");
+		fmt->pixelformat = V4L2_PIX_FMT_UYVY;
+	} else {
+		strcpy(fmt->description, "Y/CbCr 4:2:0");
+		fmt->pixelformat = V4L2_PIX_FMT_NV12;
+	}
+
+	return 0;
+}
+
+static int vpbe_display_s_fmt(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_S_FMT, layer id = %d\n",
+			layer->device_id);
+
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+	/* Check for valid pixel format */
+	ret = vpbe_try_format(disp_dev, pixfmt, 1);
+	if (ret)
+		return ret;
+
+	/* YUV420 is requested, check availability of the
+	other video window */
+
+	layer->pix_fmt = *pixfmt;
+
+	/* Get osd layer config */
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+	/* Store the pixel format in the layer object */
+	cfg->xsize = pixfmt->width;
+	cfg->ysize = pixfmt->height;
+	cfg->line_length = pixfmt->bytesperline;
+	cfg->ypos = 0;
+	cfg->xpos = 0;
+	cfg->interlaced = vpbe_dev->current_timings.interlaced;
+
+	if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat)
+		cfg->pixfmt = PIXFMT_YCbCrI;
+
+	/* Change of the default pixel format for both video windows */
+	if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) {
+		struct vpbe_layer *otherlayer;
+		cfg->pixfmt = PIXFMT_NV12;
+		otherlayer = _vpbe_display_get_other_win_layer(disp_dev,
+								layer);
+		otherlayer->layer_info.config.pixfmt = PIXFMT_NV12;
+	}
+
+	/* Set the layer config in the osd window */
+	ret = osd_device->ops.set_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+				"Error in S_FMT params:\n");
+		return -EINVAL;
+	}
+
+	/* Readback and fill the local copy of current pix format */
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+
+	return 0;
+}
+
+static int vpbe_display_try_fmt(struct file *file, void *priv,
+				  struct v4l2_format *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+
+	/* Check for valid field format */
+	return  vpbe_try_format(disp_dev, pixfmt, 0);
+
+}
+
+/**
+ * vpbe_display_s_std - Set the given standard in the encoder
+ *
+ * Sets the standard if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_display_s_std(struct file *file, void *priv,
+				v4l2_std_id *std_id)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n");
+
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+	if (NULL != vpbe_dev->ops.s_std) {
+		ret = vpbe_dev->ops.s_std(vpbe_dev, std_id);
+		if (ret) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set standard for sub devices\n");
+			return -EINVAL;
+		}
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_std - Get the standard in the current encoder
+ *
+ * Get the standard in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_display_g_std(struct file *file, void *priv,
+				v4l2_std_id *std_id)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_G_STD\n");
+
+	/* Get the standard from the current encoder */
+	if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) {
+		*std_id = vpbe_dev->current_timings.timings.std_id;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_display_enum_output - enumerate outputs
+ *
+ * Enumerates the outputs available at the vpbe display
+ * returns the status, -EINVAL if end of output list
+ */
+static int vpbe_display_enum_output(struct file *file, void *priv,
+				    struct v4l2_output *output)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_ENUM_OUTPUT\n");
+
+	/* Enumerate outputs */
+
+	if (NULL == vpbe_dev->ops.enum_outputs)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output);
+	if (ret) {
+		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"Failed to enumerate outputs\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_s_output - Set output to
+ * the output specified by the index
+ */
+static int vpbe_display_s_output(struct file *file, void *priv,
+				unsigned int i)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_S_OUTPUT\n");
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+	if (NULL == vpbe_dev->ops.set_output)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.set_output(vpbe_dev, i);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set output for sub devices\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_output - Get output from subdevice
+ * for a given by the index
+ */
+static int vpbe_display_g_output(struct file *file, void *priv,
+				unsigned int *i)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n");
+	/* Get the standard from the current encoder */
+	*i = vpbe_dev->current_out_index;
+
+	return 0;
+}
+
+/**
+ * vpbe_display_enum_dv_presets - Enumerate the dv presets
+ *
+ * enum the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_enum_dv_presets(struct file *file, void *priv,
+			struct v4l2_dv_enum_preset *preset)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_PRESETS\n");
+
+	/* Enumerate outputs */
+	if (NULL == vpbe_dev->ops.enum_dv_presets)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.enum_dv_presets(vpbe_dev, preset);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to enumerate dv presets info\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_s_dv_preset - Set the dv presets
+ *
+ * Set the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_s_dv_preset(struct file *file, void *priv,
+				struct v4l2_dv_preset *preset)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_PRESETS\n");
+
+
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+
+	/* Set the given standard in the encoder */
+	if (NULL != vpbe_dev->ops.s_dv_preset)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.s_dv_preset(vpbe_dev, preset);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set the dv presets info\n");
+		return -EINVAL;
+	}
+	/* set the current norm to zero to be consistent. If STD is used
+	 * v4l2 layer will set the norm properly on successful s_std call
+	 */
+	layer->video_dev.current_norm = 0;
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_dv_preset - Set the dv presets
+ *
+ * Get the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_g_dv_preset(struct file *file, void *priv,
+				struct v4l2_dv_preset *dv_preset)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_PRESETS\n");
+
+	/* Get the given standard in the encoder */
+
+	if (vpbe_dev->current_timings.timings_type &
+				VPBE_ENC_DV_PRESET) {
+		dv_preset->preset =
+			vpbe_dev->current_timings.timings.dv_preset;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int vpbe_display_streamoff(struct file *file, void *priv,
+				enum v4l2_buf_type buf_type)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct osd_state *osd_device = fh->disp_dev->osd_device;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_STREAMOFF,layer id = %d\n",
+			layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If io is allowed for this file handle, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+
+	/* If streaming is not started, return error */
+	if (!layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "streaming not started in layer"
+			" id = %d\n", layer->device_id);
+		return -EINVAL;
+	}
+
+	osd_device->ops.disable_layer(osd_device,
+			layer->layer_info.id);
+	layer->started = 0;
+	ret = videobuf_streamoff(&layer->buffer_queue);
+
+	return ret;
+}
+
+static int vpbe_display_streamon(struct file *file, void *priv,
+			 enum v4l2_buf_type buf_type)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	int ret;
+
+	osd_device->ops.disable_layer(osd_device,
+			layer->layer_info.id);
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_STREAMON, layerid=%d\n",
+						layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If file handle is not allowed IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+	/* If Streaming is already started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "layer is already streaming\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Call videobuf_streamon to start streaming
+	 * in videobuf
+	 */
+	ret = videobuf_streamon(&layer->buffer_queue);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+		"error in videobuf_streamon\n");
+		return ret;
+	}
+	/* If buffer queue is empty, return error */
+	if (list_empty(&layer->dma_queue)) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "buffer queue is empty\n");
+		goto streamoff;
+	}
+	/* Get the next frame from the buffer queue */
+	layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next,
+				struct videobuf_buffer, queue);
+	/* Remove buffer from the buffer queue */
+	list_del(&layer->cur_frm->queue);
+	/* Mark state of the current frame to active */
+	layer->cur_frm->state = VIDEOBUF_ACTIVE;
+	/* Initialize field_id and started member */
+	layer->field_id = 0;
+
+	/* Set parameters in OSD and VENC */
+	ret = vpbe_set_osd_display_params(disp_dev, layer);
+	if (ret < 0)
+		goto streamoff;
+
+	/*
+	 * if request format is yuv420 semiplanar, need to
+	 * enable both video windows
+	 */
+	layer->started = 1;
+
+	layer->layer_first_int = 1;
+
+	return ret;
+streamoff:
+	ret = videobuf_streamoff(&layer->buffer_queue);
+	return ret;
+}
+
+static int vpbe_display_dqbuf(struct file *file, void *priv,
+		      struct v4l2_buffer *buf)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_DQBUF, layer id = %d\n",
+		layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+	/* If this file handle is not allowed to do IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+	if (file->f_flags & O_NONBLOCK)
+		/* Call videobuf_dqbuf for non blocking mode */
+		ret = videobuf_dqbuf(&layer->buffer_queue, buf, 1);
+	else
+		/* Call videobuf_dqbuf for blocking mode */
+		ret = videobuf_dqbuf(&layer->buffer_queue, buf, 0);
+
+	return ret;
+}
+
+static int vpbe_display_qbuf(struct file *file, void *priv,
+		     struct v4l2_buffer *p)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_QBUF, layer id = %d\n",
+		layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != p->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If this file handle is not allowed to do IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+
+	return videobuf_qbuf(&layer->buffer_queue, p);
+}
+
+static int vpbe_display_querybuf(struct file *file, void *priv,
+			 struct v4l2_buffer *buf)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_QUERYBUF, layer id = %d\n",
+		layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* Call videobuf_querybuf to get information */
+	ret = videobuf_querybuf(&layer->buffer_queue, buf);
+
+	return ret;
+}
+
+static int vpbe_display_reqbufs(struct file *file, void *priv,
+			struct v4l2_requestbuffers *req_buf)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_reqbufs\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != req_buf->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If io users of the layer is not zero, return error */
+	if (0 != layer->io_usrs) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "not IO user\n");
+		return -EBUSY;
+	}
+	/* Initialize videobuf queue as per the buffer type */
+	videobuf_queue_dma_contig_init(&layer->buffer_queue,
+				&video_qops,
+				vpbe_dev->pdev,
+				&layer->irqlock,
+				V4L2_BUF_TYPE_VIDEO_OUTPUT,
+				layer->pix_fmt.field,
+				sizeof(struct videobuf_buffer),
+				fh, NULL);
+
+	/* Set io allowed member of file handle to TRUE */
+	fh->io_allowed = 1;
+	/* Increment io usrs member of layer object to 1 */
+	layer->io_usrs = 1;
+	/* Store type of memory requested in layer object */
+	layer->memory = req_buf->memory;
+	/* Initialize buffer queue */
+	INIT_LIST_HEAD(&layer->dma_queue);
+	/* Allocate buffers */
+	ret = videobuf_reqbufs(&layer->buffer_queue, req_buf);
+
+	return ret;
+}
+
+/*
+ * vpbe_display_mmap()
+ * It is used to map kernel space buffers into user spaces
+ */
+static int vpbe_display_mmap(struct file *filep, struct vm_area_struct *vma)
+{
+	/* Get the layer object and file handle object */
+	struct vpbe_fh *fh = filep->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_mmap\n");
+
+	return videobuf_mmap_mapper(&layer->buffer_queue, vma);
+}
+
+/* vpbe_display_poll(): It is used for select/poll system call
+ */
+static unsigned int vpbe_display_poll(struct file *filep, poll_table *wait)
+{
+	struct vpbe_fh *fh = filep->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned int err = 0;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_poll\n");
+	if (layer->started)
+		err = videobuf_poll_stream(filep, &layer->buffer_queue, wait);
+	return err;
+}
+
+/*
+ * vpbe_display_open()
+ * It creates object of file handle structure and stores it in private_data
+ * member of filepointer
+ */
+static int vpbe_display_open(struct file *file)
+{
+	struct vpbe_fh *fh = NULL;
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_display *disp_dev = layer->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	int err;
+
+	/* Allocate memory for the file handle object */
+	fh = kmalloc(sizeof(struct vpbe_fh), GFP_KERNEL);
+	if (fh == NULL) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"unable to allocate memory for file handle object\n");
+		return -ENOMEM;
+	}
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe display open plane = %d\n",
+			layer->device_id);
+
+	/* store pointer to fh in private_data member of filep */
+	file->private_data = fh;
+	fh->layer = layer;
+	fh->disp_dev = disp_dev;
+
+	if (!layer->usrs) {
+
+		/* First claim the layer for this device */
+		err = osd_device->ops.request_layer(osd_device,
+						layer->layer_info.id);
+		if (err < 0) {
+			/* Couldn't get layer */
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				"Display Manager failed to allocate layer\n");
+			kfree(fh);
+			return -EINVAL;
+		}
+	}
+	/* Increment layer usrs counter */
+	layer->usrs++;
+	/* Set io_allowed member to false */
+	fh->io_allowed = 0;
+	/* Initialize priority of this instance to default priority */
+	fh->prio = V4L2_PRIORITY_UNSET;
+	v4l2_prio_open(&layer->prio, &fh->prio);
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe display device opened successfully\n");
+	return 0;
+}
+
+/*
+ * vpbe_display_release()
+ * This function deletes buffer queue, frees the buffers and the davinci
+ * display file * handle
+ */
+static int vpbe_display_release(struct file *file)
+{
+	/* Get the layer object and file handle object */
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_state *osd_device = disp_dev->osd_device;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n");
+
+	/* if this instance is doing IO */
+	if (fh->io_allowed) {
+		/* Reset io_usrs member of layer object */
+		layer->io_usrs = 0;
+
+		osd_device->ops.disable_layer(osd_device,
+				layer->layer_info.id);
+		layer->started = 0;
+		/* Free buffers allocated */
+		videobuf_queue_cancel(&layer->buffer_queue);
+		videobuf_mmap_free(&layer->buffer_queue);
+	}
+
+	/* Decrement layer usrs counter */
+	layer->usrs--;
+	/* If this file handle has initialize encoder device, reset it */
+	if (!layer->usrs) {
+		if (cfg->pixfmt == PIXFMT_NV12) {
+			struct vpbe_layer *otherlayer;
+			otherlayer =
+			_vpbe_display_get_other_win_layer(disp_dev, layer);
+			osd_device->ops.disable_layer(osd_device,
+					otherlayer->layer_info.id);
+			osd_device->ops.release_layer(osd_device,
+					otherlayer->layer_info.id);
+		}
+		osd_device->ops.disable_layer(osd_device,
+				layer->layer_info.id);
+		osd_device->ops.release_layer(osd_device,
+				layer->layer_info.id);
+	}
+	/* Close the priority */
+	v4l2_prio_close(&layer->prio, fh->prio);
+	file->private_data = NULL;
+
+	/* Free memory allocated to file handle object */
+	kfree(fh);
+
+	disp_dev->cbcr_ofst = 0;
+
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vpbe_display_g_register(struct file *file, void *priv,
+			struct v4l2_dbg_register *reg)
+{
+	struct v4l2_dbg_match *match = &reg->match;
+
+	if (match->type >= 2) {
+		v4l2_subdev_call(vpbe_dev->venc,
+				 core,
+				 g_register,
+				 reg);
+	}
+
+	return 0;
+}
+
+static int vpbe_display_s_register(struct file *file, void *priv,
+			struct v4l2_dbg_register *reg)
+{
+	return 0;
+}
+#endif
+
+/* vpbe capture ioctl operations */
+static const struct v4l2_ioctl_ops vpbe_ioctl_ops = {
+	.vidioc_querycap	 = vpbe_display_querycap,
+	.vidioc_g_fmt_vid_out    = vpbe_display_g_fmt,
+	.vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt,
+	.vidioc_s_fmt_vid_out    = vpbe_display_s_fmt,
+	.vidioc_try_fmt_vid_out  = vpbe_display_try_fmt,
+	.vidioc_reqbufs		 = vpbe_display_reqbufs,
+	.vidioc_querybuf	 = vpbe_display_querybuf,
+	.vidioc_qbuf		 = vpbe_display_qbuf,
+	.vidioc_dqbuf		 = vpbe_display_dqbuf,
+	.vidioc_streamon	 = vpbe_display_streamon,
+	.vidioc_streamoff	 = vpbe_display_streamoff,
+	.vidioc_cropcap		 = vpbe_display_cropcap,
+	.vidioc_g_crop		 = vpbe_display_g_crop,
+	.vidioc_s_crop		 = vpbe_display_s_crop,
+	.vidioc_g_priority	 = vpbe_display_g_priority,
+	.vidioc_s_priority	 = vpbe_display_s_priority,
+	.vidioc_s_std		 = vpbe_display_s_std,
+	.vidioc_g_std		 = vpbe_display_g_std,
+	.vidioc_enum_output	 = vpbe_display_enum_output,
+	.vidioc_s_output	 = vpbe_display_s_output,
+	.vidioc_g_output	 = vpbe_display_g_output,
+	.vidioc_s_dv_preset	 = vpbe_display_s_dv_preset,
+	.vidioc_g_dv_preset	 = vpbe_display_g_dv_preset,
+	.vidioc_enum_dv_presets	 = vpbe_display_enum_dv_presets,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register	 = vpbe_display_g_register,
+	.vidioc_s_register	 = vpbe_display_s_register,
+#endif
+};
+
+static struct v4l2_file_operations vpbe_fops = {
+	.owner = THIS_MODULE,
+	.open = vpbe_display_open,
+	.release = vpbe_display_release,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = vpbe_display_mmap,
+	.poll = vpbe_display_poll
+};
+
+static int vpbe_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vpbe_display *vpbe_disp  = data;
+
+	if (strcmp("vpbe_controller", pdev->name) == 0)
+		vpbe_disp->vpbe_dev = platform_get_drvdata(pdev);
+
+	if (strcmp("vpbe-osd", pdev->name) == 0)
+		vpbe_disp->osd_device = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+static __devinit int init_vpbe_layer(int i, struct vpbe_display *disp_dev,
+				     struct platform_device *pdev)
+{
+	struct vpbe_layer *vpbe_display_layer = NULL;
+	struct video_device *vbd = NULL;
+
+	/* Allocate memory for four plane display objects */
+
+	disp_dev->dev[i] =
+		kzalloc(sizeof(struct vpbe_layer), GFP_KERNEL);
+
+	/* If memory allocation fails, return error */
+	if (!disp_dev->dev[i]) {
+		printk(KERN_ERR "ran out of memory\n");
+		return  -ENOMEM;
+	}
+	spin_lock_init(&disp_dev->dev[i]->irqlock);
+	mutex_init(&disp_dev->dev[i]->opslock);
+
+	/* Get the pointer to the layer object */
+	vpbe_display_layer = disp_dev->dev[i];
+	vbd = &vpbe_display_layer->video_dev;
+	/* Initialize field of video device */
+	vbd->release	= video_device_release_empty;
+	vbd->fops	= &vpbe_fops;
+	vbd->ioctl_ops	= &vpbe_ioctl_ops;
+	vbd->minor	= -1;
+	vbd->v4l2_dev   = &disp_dev->vpbe_dev->v4l2_dev;
+	vbd->lock	= &vpbe_display_layer->opslock;
+
+	if (disp_dev->vpbe_dev->current_timings.timings_type &
+			VPBE_ENC_STD) {
+		vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50);
+		vbd->current_norm =
+			disp_dev->vpbe_dev->
+			current_timings.timings.std_id;
+	} else
+		vbd->current_norm = 0;
+
+	snprintf(vbd->name, sizeof(vbd->name),
+			"DaVinci_VPBE Display_DRIVER_V%d.%d.%d",
+			(VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff,
+			(VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff,
+			(VPBE_DISPLAY_VERSION_CODE) & 0xff);
+
+	vpbe_display_layer->device_id = i;
+
+	vpbe_display_layer->layer_info.id =
+		((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1);
+
+	/* Initialize prio member of layer object */
+	v4l2_prio_init(&vpbe_display_layer->prio);
+
+	return 0;
+}
+
+static __devinit int register_device(struct vpbe_layer *vpbe_display_layer,
+					struct vpbe_display *disp_dev,
+					struct platform_device *pdev) {
+	int err;
+
+	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
+		  "Trying to register VPBE display device.\n");
+	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
+		  "layer=%x,layer->video_dev=%x\n",
+		  (int)vpbe_display_layer,
+		  (int)&vpbe_display_layer->video_dev);
+
+	err = video_register_device(&vpbe_display_layer->video_dev,
+				    VFL_TYPE_GRABBER,
+				    -1);
+	if (err)
+		return -ENODEV;
+
+	vpbe_display_layer->disp_dev = disp_dev;
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, disp_dev);
+	video_set_drvdata(&vpbe_display_layer->video_dev,
+			  vpbe_display_layer);
+
+	return 0;
+}
+
+
+
+/*
+ * vpbe_display_probe()
+ * This function creates device entries by register itself to the V4L2 driver
+ * and initializes fields of each layer objects
+ */
+static __devinit int vpbe_display_probe(struct platform_device *pdev)
+{
+	struct vpbe_layer *vpbe_display_layer;
+	struct vpbe_display *disp_dev;
+	struct resource *res = NULL;
+	int k;
+	int i;
+	int err;
+	int irq;
+
+	printk(KERN_DEBUG "vpbe_display_probe\n");
+	/* Allocate memory for vpbe_display */
+	disp_dev = kzalloc(sizeof(struct vpbe_display), GFP_KERNEL);
+	if (!disp_dev) {
+		printk(KERN_ERR "ran out of memory\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&disp_dev->dma_queue_lock);
+	/*
+	 * Scan all the platform devices to find the vpbe
+	 * controller device and get the vpbe_dev object
+	 */
+	err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev,
+			vpbe_device_get);
+	if (err < 0)
+		return err;
+	/* Initialize the vpbe display controller */
+	if (NULL != disp_dev->vpbe_dev->ops.initialize) {
+		err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev,
+							 disp_dev->vpbe_dev);
+		if (err) {
+			v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
+					"Error initing vpbe\n");
+			err = -ENOMEM;
+			goto probe_out;
+		}
+	}
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		if (init_vpbe_layer(i, disp_dev, pdev)) {
+			err = -ENODEV;
+			goto probe_out;
+		}
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
+			 "Unable to get VENC interrupt resource\n");
+		err = -ENODEV;
+		goto probe_out;
+	}
+
+	irq = res->start;
+	if (request_irq(irq, venc_isr,  IRQF_DISABLED, VPBE_DISPLAY_DRIVER,
+		disp_dev)) {
+		v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
+				"Unable to request interrupt\n");
+		err = -ENODEV;
+		goto probe_out;
+	}
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		if (register_device(disp_dev->dev[i], disp_dev, pdev)) {
+			err = -ENODEV;
+			goto probe_out;
+		}
+	}
+
+	printk(KERN_DEBUG "Successfully completed the probing of vpbe v4l2 device\n");
+	return 0;
+
+probe_out:
+	free_irq(res->start, disp_dev);
+	for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) {
+		/* Get the pointer to the layer object */
+		vpbe_display_layer = disp_dev->dev[k];
+		/* Unregister video device */
+		if (vpbe_display_layer) {
+			video_unregister_device(
+				&vpbe_display_layer->video_dev);
+				kfree(disp_dev->dev[k]);
+		}
+	}
+	kfree(disp_dev);
+	return err;
+}
+
+/*
+ * vpbe_display_remove()
+ * It un-register hardware layer from V4L2 driver
+ */
+static int vpbe_display_remove(struct platform_device *pdev)
+{
+	struct vpbe_layer *vpbe_display_layer;
+	struct vpbe_display *disp_dev = platform_get_drvdata(pdev);
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct resource *res;
+	int i;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n");
+
+	/* unregister irq */
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	free_irq(res->start, disp_dev);
+
+	/* deinitialize the vpbe display controller */
+	if (NULL != vpbe_dev->ops.deinitialize)
+		vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev);
+	/* un-register device */
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		/* Get the pointer to the layer object */
+		vpbe_display_layer = disp_dev->dev[i];
+		/* Unregister video device */
+		video_unregister_device(&vpbe_display_layer->video_dev);
+
+	}
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		kfree(disp_dev->dev[i]);
+		disp_dev->dev[i] = NULL;
+	}
+
+	return 0;
+}
+
+static struct platform_driver vpbe_display_driver = {
+	.driver = {
+		.name = VPBE_DISPLAY_DRIVER,
+		.owner = THIS_MODULE,
+		.bus = &platform_bus_type,
+	},
+	.probe = vpbe_display_probe,
+	.remove = __devexit_p(vpbe_display_remove),
+};
+
+/*
+ * vpbe_display_init()
+ * This function registers device and driver to the kernel, requests irq
+ * handler and allocates memory for layer objects
+ */
+static __devinit int vpbe_display_init(void)
+{
+	int err;
+
+	printk(KERN_DEBUG "vpbe_display_init\n");
+
+	/* Register driver to the kernel */
+	err = platform_driver_register(&vpbe_display_driver);
+	if (0 != err)
+		return err;
+
+	printk(KERN_DEBUG "vpbe_display_init:"
+			"VPBE V4L2 Display Driver V1.0 loaded\n");
+	return 0;
+}
+
+/*
+ * vpbe_display_cleanup()
+ * This function un-registers device and driver to the kernel, frees requested
+ * irq handler and de-allocates memory allocated for layer objects.
+ */
+static void vpbe_display_cleanup(void)
+{
+	printk(KERN_DEBUG "vpbe_display_cleanup\n");
+
+	/* platform driver unregister */
+	platform_driver_unregister(&vpbe_display_driver);
+}
+
+/* Function for module initialization and cleanup */
+module_init(vpbe_display_init);
+module_exit(vpbe_display_cleanup);
+
+MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_osd.c b/drivers/media/video/davinci/vpbe_osd.c
new file mode 100644
index 0000000..5352884
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_osd.c
@@ -0,0 +1,1231 @@
+/*
+ * Copyright (C) 2007-2010 Texas Instruments Inc
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Andy Lowe (alowe@mvista.com), MontaVista Software
+ * - Initial version
+ * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
+ * - ported to sub device interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include <mach/io.h>
+#include <mach/cputype.h>
+#include <mach/hardware.h>
+
+#include <media/davinci/vpss.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_osd.h>
+
+#include <linux/io.h>
+#include "vpbe_osd_regs.h"
+
+#define MODULE_NAME	VPBE_OSD_SUBDEV_NAME
+
+/* register access routines */
+static inline u32 osd_read(struct osd_state *sd, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	return readl(osd->osd_base + offset);
+}
+
+static inline u32 osd_write(struct osd_state *sd, u32 val, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	writel(val, osd->osd_base + offset);
+
+	return val;
+}
+
+static inline u32 osd_set(struct osd_state *sd, u32 mask, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	u32 addr = osd->osd_base + offset;
+	u32 val = readl(addr) | mask;
+
+	writel(val, addr);
+
+	return val;
+}
+
+static inline u32 osd_clear(struct osd_state *sd, u32 mask, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	u32 addr = osd->osd_base + offset;
+	u32 val = readl(addr) & ~mask;
+
+	writel(val, addr);
+
+	return val;
+}
+
+static inline u32 osd_modify(struct osd_state *sd, u32 mask, u32 val,
+				 u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	u32 addr = osd->osd_base + offset;
+	u32 new_val = (readl(addr) & ~mask) | (val & mask);
+
+	writel(new_val, addr);
+
+	return new_val;
+}
+
+/* define some macros for layer and pixfmt classification */
+#define is_osd_win(layer) (((layer) == WIN_OSD0) || ((layer) == WIN_OSD1))
+#define is_vid_win(layer) (((layer) == WIN_VID0) || ((layer) == WIN_VID1))
+#define is_rgb_pixfmt(pixfmt) \
+	(((pixfmt) == PIXFMT_RGB565) || ((pixfmt) == PIXFMT_RGB888))
+#define is_yc_pixfmt(pixfmt) \
+	(((pixfmt) == PIXFMT_YCbCrI) || ((pixfmt) == PIXFMT_YCrCbI) || \
+	((pixfmt) == PIXFMT_NV12))
+#define MAX_WIN_SIZE OSD_VIDWIN0XP_V0X
+#define MAX_LINE_LENGTH (OSD_VIDWIN0OFST_V0LO << 5)
+
+/**
+ * _osd_dm6446_vid0_pingpong() - field inversion fix for DM6446
+ * @sd - ptr to struct osd_state
+ * @field_inversion - inversion flag
+ * @fb_base_phys - frame buffer address
+ * @lconfig - ptr to layer config
+ *
+ * This routine implements a workaround for the field signal inversion silicon
+ * erratum described in Advisory 1.3.8 for the DM6446.  The fb_base_phys and
+ * lconfig parameters apply to the vid0 window.  This routine should be called
+ * whenever the vid0 layer configuration or start address is modified, or when
+ * the OSD field inversion setting is modified.
+ * Returns: 1 if the ping-pong buffers need to be toggled in the vsync isr, or
+ *          0 otherwise
+ */
+static int _osd_dm6446_vid0_pingpong(struct osd_state *sd,
+				     int field_inversion,
+				     unsigned long fb_base_phys,
+				     const struct osd_layer_config *lconfig)
+{
+	struct osd_platform_data *pdata;
+
+	pdata = (struct osd_platform_data *)sd->dev->platform_data;
+	if (pdata->field_inv_wa_enable) {
+
+		if (!field_inversion || !lconfig->interlaced) {
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_PPVWIN0ADR);
+			osd_modify(sd, OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, 0,
+				   OSD_MISCCTL);
+			return 0;
+		} else {
+			unsigned miscctl = OSD_MISCCTL_PPRV;
+
+			osd_write(sd,
+				(fb_base_phys & ~0x1F) - lconfig->line_length,
+				OSD_VIDWIN0ADR);
+			osd_write(sd,
+				(fb_base_phys & ~0x1F) + lconfig->line_length,
+				OSD_PPVWIN0ADR);
+			osd_modify(sd,
+				OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, miscctl,
+				OSD_MISCCTL);
+
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static void _osd_set_field_inversion(struct osd_state *sd, int enable)
+{
+	unsigned fsinv = 0;
+
+	if (enable)
+		fsinv = OSD_MODE_FSINV;
+
+	osd_modify(sd, OSD_MODE_FSINV, fsinv, OSD_MODE);
+}
+
+static void _osd_set_blink_attribute(struct osd_state *sd, int enable,
+				     enum osd_blink_interval blink)
+{
+	u32 osdatrmd = 0;
+
+	if (enable) {
+		osdatrmd |= OSD_OSDATRMD_BLNK;
+		osdatrmd |= blink << OSD_OSDATRMD_BLNKINT_SHIFT;
+	}
+	/* caller must ensure that OSD1 is configured in attribute mode */
+	osd_modify(sd, OSD_OSDATRMD_BLNKINT | OSD_OSDATRMD_BLNK, osdatrmd,
+		  OSD_OSDATRMD);
+}
+
+static void _osd_set_rom_clut(struct osd_state *sd,
+			      enum osd_rom_clut rom_clut)
+{
+	if (rom_clut == ROM_CLUT0)
+		osd_clear(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
+	else
+		osd_set(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
+}
+
+static void _osd_set_palette_map(struct osd_state *sd,
+				 enum osd_win_layer osdwin,
+				 unsigned char pixel_value,
+				 unsigned char clut_index,
+				 enum osd_pix_format pixfmt)
+{
+	static const int map_2bpp[] = { 0, 5, 10, 15 };
+	static const int map_1bpp[] = { 0, 15 };
+	int bmp_offset;
+	int bmp_shift;
+	int bmp_mask;
+	int bmp_reg;
+
+	switch (pixfmt) {
+	case PIXFMT_1BPP:
+		bmp_reg = map_1bpp[pixel_value & 0x1];
+		break;
+	case PIXFMT_2BPP:
+		bmp_reg = map_2bpp[pixel_value & 0x3];
+		break;
+	case PIXFMT_4BPP:
+		bmp_reg = pixel_value & 0xf;
+		break;
+	default:
+		return;
+	}
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		bmp_offset = OSD_W0BMP01 + (bmp_reg >> 1) * sizeof(u32);
+		break;
+	case OSDWIN_OSD1:
+		bmp_offset = OSD_W1BMP01 + (bmp_reg >> 1) * sizeof(u32);
+		break;
+	default:
+		return;
+	}
+
+	if (bmp_reg & 1) {
+		bmp_shift = 8;
+		bmp_mask = 0xff << 8;
+	} else {
+		bmp_shift = 0;
+		bmp_mask = 0xff;
+	}
+
+	osd_modify(sd, bmp_mask, clut_index << bmp_shift, bmp_offset);
+}
+
+static void _osd_set_rec601_attenuation(struct osd_state *sd,
+					enum osd_win_layer osdwin, int enable)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_modify(sd, OSD_OSDWIN0MD_ATN0E,
+			  enable ? OSD_OSDWIN0MD_ATN0E : 0,
+			  OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_modify(sd, OSD_OSDWIN1MD_ATN1E,
+			  enable ? OSD_OSDWIN1MD_ATN1E : 0,
+			  OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_set_blending_factor(struct osd_state *sd,
+				     enum osd_win_layer osdwin,
+				     enum osd_blending_factor blend)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_modify(sd, OSD_OSDWIN0MD_BLND0,
+			  blend << OSD_OSDWIN0MD_BLND0_SHIFT, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_modify(sd, OSD_OSDWIN1MD_BLND1,
+			  blend << OSD_OSDWIN1MD_BLND1_SHIFT, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_enable_color_key(struct osd_state *sd,
+				  enum osd_win_layer osdwin,
+				  unsigned colorkey,
+				  enum osd_pix_format pixfmt)
+{
+	switch (pixfmt) {
+	case PIXFMT_RGB565:
+		osd_write(sd, colorkey & OSD_TRANSPVAL_RGBTRANS,
+			  OSD_TRANSPVAL);
+		break;
+	default:
+		break;
+	}
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_set(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_set(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_disable_color_key(struct osd_state *sd,
+				   enum osd_win_layer osdwin)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_clear(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_clear(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_set_osd_clut(struct osd_state *sd,
+			      enum osd_win_layer osdwin,
+			      enum osd_clut clut)
+{
+	u32 winmd = 0;
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		if (clut == RAM_CLUT)
+			winmd |= OSD_OSDWIN0MD_CLUTS0;
+		osd_modify(sd, OSD_OSDWIN0MD_CLUTS0, winmd, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		if (clut == RAM_CLUT)
+			winmd |= OSD_OSDWIN1MD_CLUTS1;
+		osd_modify(sd, OSD_OSDWIN1MD_CLUTS1, winmd, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_set_zoom(struct osd_state *sd, enum osd_layer layer,
+			  enum osd_zoom_factor h_zoom,
+			  enum osd_zoom_factor v_zoom)
+{
+	u32 winmd = 0;
+
+	switch (layer) {
+	case WIN_OSD0:
+		winmd |= (h_zoom << OSD_OSDWIN0MD_OHZ0_SHIFT);
+		winmd |= (v_zoom << OSD_OSDWIN0MD_OVZ0_SHIFT);
+		osd_modify(sd, OSD_OSDWIN0MD_OHZ0 | OSD_OSDWIN0MD_OVZ0, winmd,
+			  OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		winmd |= (h_zoom << OSD_VIDWINMD_VHZ0_SHIFT);
+		winmd |= (v_zoom << OSD_VIDWINMD_VVZ0_SHIFT);
+		osd_modify(sd, OSD_VIDWINMD_VHZ0 | OSD_VIDWINMD_VVZ0, winmd,
+			  OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		winmd |= (h_zoom << OSD_OSDWIN1MD_OHZ1_SHIFT);
+		winmd |= (v_zoom << OSD_OSDWIN1MD_OVZ1_SHIFT);
+		osd_modify(sd, OSD_OSDWIN1MD_OHZ1 | OSD_OSDWIN1MD_OVZ1, winmd,
+			  OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		winmd |= (h_zoom << OSD_VIDWINMD_VHZ1_SHIFT);
+		winmd |= (v_zoom << OSD_VIDWINMD_VVZ1_SHIFT);
+		osd_modify(sd, OSD_VIDWINMD_VHZ1 | OSD_VIDWINMD_VVZ1, winmd,
+			  OSD_VIDWINMD);
+		break;
+	}
+}
+
+static void _osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	switch (layer) {
+	case WIN_OSD0:
+		osd_clear(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		osd_clear(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		/* disable attribute mode as well as disabling the window */
+		osd_clear(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
+			  OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		osd_clear(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
+		break;
+	}
+}
+
+static void osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (!win->is_enabled) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return;
+	}
+	win->is_enabled = 0;
+
+	_osd_disable_layer(sd, layer);
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void _osd_enable_attribute_mode(struct osd_state *sd)
+{
+	/* enable attribute mode for OSD1 */
+	osd_set(sd, OSD_OSDWIN1MD_OASW, OSD_OSDWIN1MD);
+}
+
+static void _osd_enable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	switch (layer) {
+	case WIN_OSD0:
+		osd_set(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		osd_set(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		/* enable OSD1 and disable attribute mode */
+		osd_modify(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
+			  OSD_OSDWIN1MD_OACT1, OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		osd_set(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
+		break;
+	}
+}
+
+static int osd_enable_layer(struct osd_state *sd, enum osd_layer layer,
+			    int otherwin)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	/*
+	 * use otherwin flag to know this is the other vid window
+	 * in YUV420 mode, if is, skip this check
+	 */
+	if (!otherwin && (!win->is_allocated ||
+			!win->fb_base_phys ||
+			!cfg->line_length ||
+			!cfg->xsize ||
+			!cfg->ysize)) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return -1;
+	}
+
+	if (win->is_enabled) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return 0;
+	}
+	win->is_enabled = 1;
+
+	if (cfg->pixfmt != PIXFMT_OSD_ATTR)
+		_osd_enable_layer(sd, layer);
+	else {
+		_osd_enable_attribute_mode(sd);
+		_osd_set_blink_attribute(sd, osd->is_blinking, osd->blink);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+static void _osd_start_layer(struct osd_state *sd, enum osd_layer layer,
+			     unsigned long fb_base_phys,
+			     unsigned long cbcr_ofst)
+{
+	switch (layer) {
+	case WIN_OSD0:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN0ADR);
+		break;
+	case WIN_VID0:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
+		break;
+	case WIN_OSD1:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN1ADR);
+		break;
+	case WIN_VID1:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN1ADR);
+		break;
+	}
+}
+
+static void osd_start_layer(struct osd_state *sd, enum osd_layer layer,
+			    unsigned long fb_base_phys,
+			    unsigned long cbcr_ofst)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->fb_base_phys = fb_base_phys & ~0x1F;
+	_osd_start_layer(sd, layer, fb_base_phys, cbcr_ofst);
+
+	if (layer == WIN_VID0) {
+		osd->pingpong =
+		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
+						       win->fb_base_phys,
+						       cfg);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void osd_get_layer_config(struct osd_state *sd, enum osd_layer layer,
+				 struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	*lconfig = win->lconfig;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+/**
+ * try_layer_config() - Try a specific configuration for the layer
+ * @sd  - ptr to struct osd_state
+ * @layer - layer to configure
+ * @lconfig - layer configuration to try
+ *
+ * If the requested lconfig is completely rejected and the value of lconfig on
+ * exit is the current lconfig, then try_layer_config() returns 1.  Otherwise,
+ * try_layer_config() returns 0.  A return value of 0 does not necessarily mean
+ * that the value of lconfig on exit is identical to the value of lconfig on
+ * entry, but merely that it represents a change from the current lconfig.
+ */
+static int try_layer_config(struct osd_state *sd, enum osd_layer layer,
+			    struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	int bad_config;
+
+	/* verify that the pixel format is compatible with the layer */
+	switch (lconfig->pixfmt) {
+	case PIXFMT_1BPP:
+	case PIXFMT_2BPP:
+	case PIXFMT_4BPP:
+	case PIXFMT_8BPP:
+	case PIXFMT_RGB565:
+		bad_config = !is_osd_win(layer);
+		break;
+	case PIXFMT_YCbCrI:
+	case PIXFMT_YCrCbI:
+		bad_config = !is_vid_win(layer);
+		break;
+	case PIXFMT_RGB888:
+		bad_config = !is_vid_win(layer);
+		break;
+	case PIXFMT_NV12:
+		bad_config = 1;
+		break;
+	case PIXFMT_OSD_ATTR:
+		bad_config = (layer != WIN_OSD1);
+		break;
+	default:
+		bad_config = 1;
+		break;
+	}
+	if (bad_config) {
+		/*
+		 * The requested pixel format is incompatible with the layer,
+		 * so keep the current layer configuration.
+		 */
+		*lconfig = win->lconfig;
+		return bad_config;
+	}
+
+	/* DM6446: */
+	/* only one OSD window at a time can use RGB pixel formats */
+	if (is_osd_win(layer) && is_rgb_pixfmt(lconfig->pixfmt)) {
+		enum osd_pix_format pixfmt;
+		if (layer == WIN_OSD0)
+			pixfmt = osd->win[WIN_OSD1].lconfig.pixfmt;
+		else
+			pixfmt = osd->win[WIN_OSD0].lconfig.pixfmt;
+
+		if (is_rgb_pixfmt(pixfmt)) {
+			/*
+			 * The other OSD window is already configured for an
+			 * RGB, so keep the current layer configuration.
+			 */
+			*lconfig = win->lconfig;
+			return 1;
+		}
+	}
+
+	/* DM6446: only one video window at a time can use RGB888 */
+	if (is_vid_win(layer) && lconfig->pixfmt == PIXFMT_RGB888) {
+		enum osd_pix_format pixfmt;
+
+		if (layer == WIN_VID0)
+			pixfmt = osd->win[WIN_VID1].lconfig.pixfmt;
+		else
+			pixfmt = osd->win[WIN_VID0].lconfig.pixfmt;
+
+		if (pixfmt == PIXFMT_RGB888) {
+			/*
+			 * The other video window is already configured for
+			 * RGB888, so keep the current layer configuration.
+			 */
+			*lconfig = win->lconfig;
+			return 1;
+		}
+	}
+
+	/* window dimensions must be non-zero */
+	if (!lconfig->line_length || !lconfig->xsize || !lconfig->ysize) {
+		*lconfig = win->lconfig;
+		return 1;
+	}
+
+	/* round line_length up to a multiple of 32 */
+	lconfig->line_length = ((lconfig->line_length + 31) / 32) * 32;
+	lconfig->line_length =
+	    min(lconfig->line_length, (unsigned)MAX_LINE_LENGTH);
+	lconfig->xsize = min(lconfig->xsize, (unsigned)MAX_WIN_SIZE);
+	lconfig->ysize = min(lconfig->ysize, (unsigned)MAX_WIN_SIZE);
+	lconfig->xpos = min(lconfig->xpos, (unsigned)MAX_WIN_SIZE);
+	lconfig->ypos = min(lconfig->ypos, (unsigned)MAX_WIN_SIZE);
+	lconfig->interlaced = (lconfig->interlaced != 0);
+	if (lconfig->interlaced) {
+		/* ysize and ypos must be even for interlaced displays */
+		lconfig->ysize &= ~1;
+		lconfig->ypos &= ~1;
+	}
+
+	return 0;
+}
+
+static void _osd_disable_vid_rgb888(struct osd_state *sd)
+{
+	/*
+	 * The DM6446 supports RGB888 pixel format in a single video window.
+	 * This routine disables RGB888 pixel format for both video windows.
+	 * The caller must ensure that neither video window is currently
+	 * configured for RGB888 pixel format.
+	 */
+	osd_clear(sd, OSD_MISCCTL_RGBEN, OSD_MISCCTL);
+}
+
+static void _osd_enable_vid_rgb888(struct osd_state *sd,
+				   enum osd_layer layer)
+{
+	/*
+	 * The DM6446 supports RGB888 pixel format in a single video window.
+	 * This routine enables RGB888 pixel format for the specified video
+	 * window.  The caller must ensure that the other video window is not
+	 * currently configured for RGB888 pixel format, as this routine will
+	 * disable RGB888 pixel format for the other window.
+	 */
+	if (layer == WIN_VID0) {
+		osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+			  OSD_MISCCTL_RGBEN, OSD_MISCCTL);
+	} else if (layer == WIN_VID1) {
+		osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+			  OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+			  OSD_MISCCTL);
+	}
+}
+
+static void _osd_set_cbcr_order(struct osd_state *sd,
+				enum osd_pix_format pixfmt)
+{
+	/*
+	 * The caller must ensure that all windows using YC pixfmt use the same
+	 * Cb/Cr order.
+	 */
+	if (pixfmt == PIXFMT_YCbCrI)
+		osd_clear(sd, OSD_MODE_CS, OSD_MODE);
+	else if (pixfmt == PIXFMT_YCrCbI)
+		osd_set(sd, OSD_MODE_CS, OSD_MODE);
+}
+
+static void _osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
+				  const struct osd_layer_config *lconfig)
+{
+	u32 winmd = 0, winmd_mask = 0, bmw = 0;
+
+	_osd_set_cbcr_order(sd, lconfig->pixfmt);
+
+	switch (layer) {
+	case WIN_OSD0:
+		winmd_mask |= OSD_OSDWIN0MD_RGB0E;
+		if (lconfig->pixfmt == PIXFMT_RGB565)
+			winmd |= OSD_OSDWIN0MD_RGB0E;
+
+		winmd_mask |= OSD_OSDWIN0MD_BMW0 | OSD_OSDWIN0MD_OFF0;
+
+		switch (lconfig->pixfmt) {
+		case PIXFMT_1BPP:
+			bmw = 0;
+			break;
+		case PIXFMT_2BPP:
+			bmw = 1;
+			break;
+		case PIXFMT_4BPP:
+			bmw = 2;
+			break;
+		case PIXFMT_8BPP:
+			bmw = 3;
+			break;
+		default:
+			break;
+		}
+		winmd |= (bmw << OSD_OSDWIN0MD_BMW0_SHIFT);
+
+		if (lconfig->interlaced)
+			winmd |= OSD_OSDWIN0MD_OFF0;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN0MD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN0OFST);
+		osd_write(sd, lconfig->xpos, OSD_OSDWIN0XP);
+		osd_write(sd, lconfig->xsize, OSD_OSDWIN0XL);
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN0YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN0YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_OSDWIN0YP);
+			osd_write(sd, lconfig->ysize, OSD_OSDWIN0YL);
+		}
+		break;
+	case WIN_VID0:
+		winmd_mask |= OSD_VIDWINMD_VFF0;
+		if (lconfig->interlaced)
+			winmd |= OSD_VIDWINMD_VFF0;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN0OFST);
+		osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP);
+		osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL);
+		/*
+		 * For YUV420P format the register contents are
+		 * duplicated in both VID registers
+		 */
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN0YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN0YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP);
+			osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL);
+		}
+		break;
+	case WIN_OSD1:
+		/*
+		 * The caller must ensure that OSD1 is disabled prior to
+		 * switching from a normal mode to attribute mode or from
+		 * attribute mode to a normal mode.
+		 */
+		if (lconfig->pixfmt == PIXFMT_OSD_ATTR) {
+			winmd_mask |=
+			    OSD_OSDWIN1MD_ATN1E | OSD_OSDWIN1MD_RGB1E |
+			    OSD_OSDWIN1MD_CLUTS1 |
+			    OSD_OSDWIN1MD_BLND1 | OSD_OSDWIN1MD_TE1;
+		} else {
+			winmd_mask |= OSD_OSDWIN1MD_RGB1E;
+			if (lconfig->pixfmt == PIXFMT_RGB565)
+				winmd |= OSD_OSDWIN1MD_RGB1E;
+
+			winmd_mask |= OSD_OSDWIN1MD_BMW1;
+			switch (lconfig->pixfmt) {
+			case PIXFMT_1BPP:
+				bmw = 0;
+				break;
+			case PIXFMT_2BPP:
+				bmw = 1;
+				break;
+			case PIXFMT_4BPP:
+				bmw = 2;
+				break;
+			case PIXFMT_8BPP:
+				bmw = 3;
+				break;
+			default:
+				break;
+			}
+			winmd |= (bmw << OSD_OSDWIN1MD_BMW1_SHIFT);
+		}
+
+		winmd_mask |= OSD_OSDWIN1MD_OFF1;
+		if (lconfig->interlaced)
+			winmd |= OSD_OSDWIN1MD_OFF1;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN1MD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN1OFST);
+		osd_write(sd, lconfig->xpos, OSD_OSDWIN1XP);
+		osd_write(sd, lconfig->xsize, OSD_OSDWIN1XL);
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN1YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN1YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_OSDWIN1YP);
+			osd_write(sd, lconfig->ysize, OSD_OSDWIN1YL);
+		}
+		break;
+	case WIN_VID1:
+		winmd_mask |= OSD_VIDWINMD_VFF1;
+		if (lconfig->interlaced)
+			winmd |= OSD_VIDWINMD_VFF1;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN1OFST);
+		osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP);
+		osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL);
+		/*
+		 * For YUV420P format the register contents are
+		 * duplicated in both VID registers
+		 */
+		osd_modify(sd, OSD_MISCCTL_S420D, ~OSD_MISCCTL_S420D,
+			   OSD_MISCCTL);
+
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN1YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN1YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP);
+			osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL);
+		}
+		break;
+	}
+}
+
+static int osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
+				struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+	int reject_config;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	reject_config = try_layer_config(sd, layer, lconfig);
+	if (reject_config) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return reject_config;
+	}
+
+	/* update the current Cb/Cr order */
+	if (is_yc_pixfmt(lconfig->pixfmt))
+		osd->yc_pixfmt = lconfig->pixfmt;
+
+	/*
+	 * If we are switching OSD1 from normal mode to attribute mode or from
+	 * attribute mode to normal mode, then we must disable the window.
+	 */
+	if (layer == WIN_OSD1) {
+		if (((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) ||
+		  ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt == PIXFMT_OSD_ATTR))) {
+			win->is_enabled = 0;
+			_osd_disable_layer(sd, layer);
+		}
+	}
+
+	_osd_set_layer_config(sd, layer, lconfig);
+
+	if (layer == WIN_OSD1) {
+		struct osd_osdwin_state *osdwin_state =
+		    &osd->osdwin[OSDWIN_OSD1];
+
+		if ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt == PIXFMT_OSD_ATTR)) {
+			/*
+			 * We just switched OSD1 from attribute mode to normal
+			 * mode, so we must initialize the CLUT select, the
+			 * blend factor, transparency colorkey enable, and
+			 * attenuation enable (DM6446 only) bits in the
+			 * OSDWIN1MD register.
+			 */
+			_osd_set_osd_clut(sd, OSDWIN_OSD1,
+						   osdwin_state->clut);
+			_osd_set_blending_factor(sd, OSDWIN_OSD1,
+							  osdwin_state->blend);
+			if (osdwin_state->colorkey_blending) {
+				_osd_enable_color_key(sd, OSDWIN_OSD1,
+							       osdwin_state->
+							       colorkey,
+							       lconfig->pixfmt);
+			} else
+				_osd_disable_color_key(sd, OSDWIN_OSD1);
+			_osd_set_rec601_attenuation(sd, OSDWIN_OSD1,
+						    osdwin_state->
+						    rec601_attenuation);
+		} else if ((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) {
+			/*
+			 * We just switched OSD1 from normal mode to attribute
+			 * mode, so we must initialize the blink enable and
+			 * blink interval bits in the OSDATRMD register.
+			 */
+			_osd_set_blink_attribute(sd, osd->is_blinking,
+							  osd->blink);
+		}
+	}
+
+	/*
+	 * If we just switched to a 1-, 2-, or 4-bits-per-pixel bitmap format
+	 * then configure a default palette map.
+	 */
+	if ((lconfig->pixfmt != cfg->pixfmt) &&
+	  ((lconfig->pixfmt == PIXFMT_1BPP) ||
+	  (lconfig->pixfmt == PIXFMT_2BPP) ||
+	  (lconfig->pixfmt == PIXFMT_4BPP))) {
+		enum osd_win_layer osdwin =
+		    ((layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1);
+		struct osd_osdwin_state *osdwin_state =
+		    &osd->osdwin[osdwin];
+		unsigned char clut_index;
+		unsigned char clut_entries = 0;
+
+		switch (lconfig->pixfmt) {
+		case PIXFMT_1BPP:
+			clut_entries = 2;
+			break;
+		case PIXFMT_2BPP:
+			clut_entries = 4;
+			break;
+		case PIXFMT_4BPP:
+			clut_entries = 16;
+			break;
+		default:
+			break;
+		}
+		/*
+		 * The default palette map maps the pixel value to the clut
+		 * index, i.e. pixel value 0 maps to clut entry 0, pixel value
+		 * 1 maps to clut entry 1, etc.
+		 */
+		for (clut_index = 0; clut_index < 16; clut_index++) {
+			osdwin_state->palette_map[clut_index] = clut_index;
+			if (clut_index < clut_entries) {
+				_osd_set_palette_map(sd, osdwin, clut_index,
+						     clut_index,
+						     lconfig->pixfmt);
+			}
+		}
+	}
+
+	*cfg = *lconfig;
+	/* DM6446: configure the RGB888 enable and window selection */
+	if (osd->win[WIN_VID0].lconfig.pixfmt == PIXFMT_RGB888)
+		_osd_enable_vid_rgb888(sd, WIN_VID0);
+	else if (osd->win[WIN_VID1].lconfig.pixfmt == PIXFMT_RGB888)
+		_osd_enable_vid_rgb888(sd, WIN_VID1);
+	else
+		_osd_disable_vid_rgb888(sd);
+
+	if (layer == WIN_VID0) {
+		osd->pingpong =
+		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
+						       win->fb_base_phys,
+						       cfg);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+static void osd_init_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	enum osd_win_layer osdwin;
+	struct osd_osdwin_state *osdwin_state;
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->is_enabled = 0;
+	_osd_disable_layer(sd, layer);
+
+	win->h_zoom = ZOOM_X1;
+	win->v_zoom = ZOOM_X1;
+	_osd_set_zoom(sd, layer, win->h_zoom, win->v_zoom);
+
+	win->fb_base_phys = 0;
+	_osd_start_layer(sd, layer, win->fb_base_phys, 0);
+
+	cfg->line_length = 0;
+	cfg->xsize = 0;
+	cfg->ysize = 0;
+	cfg->xpos = 0;
+	cfg->ypos = 0;
+	cfg->interlaced = 0;
+	switch (layer) {
+	case WIN_OSD0:
+	case WIN_OSD1:
+		osdwin = (layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1;
+		osdwin_state = &osd->osdwin[osdwin];
+		/*
+		 * Other code relies on the fact that OSD windows default to a
+		 * bitmap pixel format when they are deallocated, so don't
+		 * change this default pixel format.
+		 */
+		cfg->pixfmt = PIXFMT_8BPP;
+		_osd_set_layer_config(sd, layer, cfg);
+		osdwin_state->clut = RAM_CLUT;
+		_osd_set_osd_clut(sd, osdwin, osdwin_state->clut);
+		osdwin_state->colorkey_blending = 0;
+		_osd_disable_color_key(sd, osdwin);
+		osdwin_state->blend = OSD_8_VID_0;
+		_osd_set_blending_factor(sd, osdwin, osdwin_state->blend);
+		osdwin_state->rec601_attenuation = 0;
+		_osd_set_rec601_attenuation(sd, osdwin,
+						     osdwin_state->
+						     rec601_attenuation);
+		if (osdwin == OSDWIN_OSD1) {
+			osd->is_blinking = 0;
+			osd->blink = BLINK_X1;
+		}
+		break;
+	case WIN_VID0:
+	case WIN_VID1:
+		cfg->pixfmt = osd->yc_pixfmt;
+		_osd_set_layer_config(sd, layer, cfg);
+		break;
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void osd_release_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (!win->is_allocated) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return;
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+	osd_init_layer(sd, layer);
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->is_allocated = 0;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static int osd_request_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (win->is_allocated) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return -1;
+	}
+	win->is_allocated = 1;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+static void _osd_init(struct osd_state *sd)
+{
+	osd_write(sd, 0, OSD_MODE);
+	osd_write(sd, 0, OSD_VIDWINMD);
+	osd_write(sd, 0, OSD_OSDWIN0MD);
+	osd_write(sd, 0, OSD_OSDWIN1MD);
+	osd_write(sd, 0, OSD_RECTCUR);
+	osd_write(sd, 0, OSD_MISCCTL);
+}
+
+static void osd_set_left_margin(struct osd_state *sd, u32 val)
+{
+	osd_write(sd, val, OSD_BASEPX);
+}
+
+static void osd_set_top_margin(struct osd_state *sd, u32 val)
+{
+	osd_write(sd, val, OSD_BASEPY);
+}
+
+static int osd_initialize(struct osd_state *osd)
+{
+	if (osd == NULL)
+		return -ENODEV;
+	_osd_init(osd);
+
+	/* set default Cb/Cr order */
+	osd->yc_pixfmt = PIXFMT_YCbCrI;
+
+	_osd_set_field_inversion(osd, osd->field_inversion);
+	_osd_set_rom_clut(osd, osd->rom_clut);
+
+	osd_init_layer(osd, WIN_OSD0);
+	osd_init_layer(osd, WIN_VID0);
+	osd_init_layer(osd, WIN_OSD1);
+	osd_init_layer(osd, WIN_VID1);
+
+	return 0;
+}
+
+static const struct vpbe_osd_ops osd_ops = {
+	.initialize = osd_initialize,
+	.request_layer = osd_request_layer,
+	.release_layer = osd_release_layer,
+	.enable_layer = osd_enable_layer,
+	.disable_layer = osd_disable_layer,
+	.set_layer_config = osd_set_layer_config,
+	.get_layer_config = osd_get_layer_config,
+	.start_layer = osd_start_layer,
+	.set_left_margin = osd_set_left_margin,
+	.set_top_margin = osd_set_top_margin,
+};
+
+static int osd_probe(struct platform_device *pdev)
+{
+	struct osd_platform_data *pdata;
+	struct osd_state *osd;
+	struct resource *res;
+	int ret = 0;
+
+	osd = kzalloc(sizeof(struct osd_state), GFP_KERNEL);
+	if (osd == NULL)
+		return -ENOMEM;
+
+	osd->dev = &pdev->dev;
+	pdata = (struct osd_platform_data *)pdev->dev.platform_data;
+	osd->vpbe_type = (enum vpbe_version)pdata->vpbe_type;
+	if (NULL == pdev->dev.platform_data) {
+		dev_err(osd->dev, "No platform data defined for OSD"
+			" sub device\n");
+		ret = -ENOENT;
+		goto free_mem;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(osd->dev, "Unable to get OSD register address map\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+	osd->osd_base_phys = res->start;
+	osd->osd_size = res->end - res->start + 1;
+	if (!request_mem_region(osd->osd_base_phys, osd->osd_size,
+				MODULE_NAME)) {
+		dev_err(osd->dev, "Unable to reserve OSD MMIO region\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+	osd->osd_base = (unsigned long)ioremap_nocache(res->start,
+							osd->osd_size);
+	if (!osd->osd_base) {
+		dev_err(osd->dev, "Unable to map the OSD region\n");
+		ret = -ENODEV;
+		goto release_mem_region;
+	}
+	spin_lock_init(&osd->lock);
+	osd->ops = osd_ops;
+	platform_set_drvdata(pdev, osd);
+	dev_notice(osd->dev, "OSD sub device probe success\n");
+	return ret;
+
+release_mem_region:
+	release_mem_region(osd->osd_base_phys, osd->osd_size);
+free_mem:
+	kfree(osd);
+	return ret;
+}
+
+static int osd_remove(struct platform_device *pdev)
+{
+	struct osd_state *osd = platform_get_drvdata(pdev);
+
+	iounmap((void *)osd->osd_base);
+	release_mem_region(osd->osd_base_phys, osd->osd_size);
+	kfree(osd);
+	return 0;
+}
+
+static struct platform_driver osd_driver = {
+	.probe		= osd_probe,
+	.remove		= osd_remove,
+	.driver		= {
+		.name	= MODULE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int osd_init(void)
+{
+	if (platform_driver_register(&osd_driver)) {
+		printk(KERN_ERR "Unable to register davinci osd driver\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void osd_exit(void)
+{
+	platform_driver_unregister(&osd_driver);
+}
+
+module_init(osd_init);
+module_exit(osd_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DaVinci OSD Manager Driver");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_osd_regs.h b/drivers/media/video/davinci/vpbe_osd_regs.h
new file mode 100644
index 0000000..584520f
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_osd_regs.h
@@ -0,0 +1,364 @@
+/*
+ * Copyright (C) 2006-2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_OSD_REGS_H
+#define _VPBE_OSD_REGS_H
+
+/* VPBE Global Registers */
+#define VPBE_PID				0x0
+#define VPBE_PCR				0x4
+
+/* VPSS CLock Registers */
+#define VPSSCLK_PID				0x00
+#define VPSSCLK_CLKCTRL				0x04
+
+/* VPSS Buffer Logic Registers */
+#define VPSSBL_PID				0x00
+#define VPSSBL_PCR				0x04
+#define VPSSBL_BCR				0x08
+#define VPSSBL_INTSTAT				0x0C
+#define VPSSBL_INTSEL				0x10
+#define VPSSBL_EVTSEL				0x14
+#define VPSSBL_MEMCTRL				0x18
+#define VPSSBL_CCDCMUX				0x1C
+
+/* DM365 ISP5 system configuration */
+#define ISP5_PID				0x0
+#define ISP5_PCCR				0x4
+#define ISP5_BCR				0x8
+#define ISP5_INTSTAT				0xC
+#define ISP5_INTSEL1				0x10
+#define ISP5_INTSEL2				0x14
+#define ISP5_INTSEL3				0x18
+#define ISP5_EVTSEL				0x1c
+#define ISP5_CCDCMUX				0x20
+
+/* VPBE On-Screen Display Subsystem Registers (OSD) */
+#define OSD_MODE				0x00
+#define OSD_VIDWINMD				0x04
+#define OSD_OSDWIN0MD				0x08
+#define OSD_OSDWIN1MD				0x0C
+#define OSD_OSDATRMD				0x0C
+#define OSD_RECTCUR				0x10
+#define OSD_VIDWIN0OFST				0x18
+#define OSD_VIDWIN1OFST				0x1C
+#define OSD_OSDWIN0OFST				0x20
+#define OSD_OSDWIN1OFST				0x24
+#define OSD_VIDWINADH				0x28
+#define OSD_VIDWIN0ADL				0x2C
+#define OSD_VIDWIN0ADR				0x2C
+#define OSD_VIDWIN1ADL				0x30
+#define OSD_VIDWIN1ADR				0x30
+#define OSD_OSDWINADH				0x34
+#define OSD_OSDWIN0ADL				0x38
+#define OSD_OSDWIN0ADR				0x38
+#define OSD_OSDWIN1ADL				0x3C
+#define OSD_OSDWIN1ADR				0x3C
+#define OSD_BASEPX				0x40
+#define OSD_BASEPY				0x44
+#define OSD_VIDWIN0XP				0x48
+#define OSD_VIDWIN0YP				0x4C
+#define OSD_VIDWIN0XL				0x50
+#define OSD_VIDWIN0YL				0x54
+#define OSD_VIDWIN1XP				0x58
+#define OSD_VIDWIN1YP				0x5C
+#define OSD_VIDWIN1XL				0x60
+#define OSD_VIDWIN1YL				0x64
+#define OSD_OSDWIN0XP				0x68
+#define OSD_OSDWIN0YP				0x6C
+#define OSD_OSDWIN0XL				0x70
+#define OSD_OSDWIN0YL				0x74
+#define OSD_OSDWIN1XP				0x78
+#define OSD_OSDWIN1YP				0x7C
+#define OSD_OSDWIN1XL				0x80
+#define OSD_OSDWIN1YL				0x84
+#define OSD_CURXP				0x88
+#define OSD_CURYP				0x8C
+#define OSD_CURXL				0x90
+#define OSD_CURYL				0x94
+#define OSD_W0BMP01				0xA0
+#define OSD_W0BMP23				0xA4
+#define OSD_W0BMP45				0xA8
+#define OSD_W0BMP67				0xAC
+#define OSD_W0BMP89				0xB0
+#define OSD_W0BMPAB				0xB4
+#define OSD_W0BMPCD				0xB8
+#define OSD_W0BMPEF				0xBC
+#define OSD_W1BMP01				0xC0
+#define OSD_W1BMP23				0xC4
+#define OSD_W1BMP45				0xC8
+#define OSD_W1BMP67				0xCC
+#define OSD_W1BMP89				0xD0
+#define OSD_W1BMPAB				0xD4
+#define OSD_W1BMPCD				0xD8
+#define OSD_W1BMPEF				0xDC
+#define OSD_VBNDRY				0xE0
+#define OSD_EXTMODE				0xE4
+#define OSD_MISCCTL				0xE8
+#define OSD_CLUTRAMYCB				0xEC
+#define OSD_CLUTRAMCR				0xF0
+#define OSD_TRANSPVAL				0xF4
+#define OSD_TRANSPVALL				0xF4
+#define OSD_TRANSPVALU				0xF8
+#define OSD_TRANSPBMPIDX			0xFC
+#define OSD_PPVWIN0ADR				0xFC
+
+/* bit definitions */
+#define VPBE_PCR_VENC_DIV			(1 << 1)
+#define VPBE_PCR_CLK_OFF			(1 << 0)
+
+#define VPSSBL_INTSTAT_HSSIINT			(1 << 14)
+#define VPSSBL_INTSTAT_CFALDINT			(1 << 13)
+#define VPSSBL_INTSTAT_IPIPE_INT5		(1 << 12)
+#define VPSSBL_INTSTAT_IPIPE_INT4		(1 << 11)
+#define VPSSBL_INTSTAT_IPIPE_INT3		(1 << 10)
+#define VPSSBL_INTSTAT_IPIPE_INT2		(1 << 9)
+#define VPSSBL_INTSTAT_IPIPE_INT1		(1 << 8)
+#define VPSSBL_INTSTAT_IPIPE_INT0		(1 << 7)
+#define VPSSBL_INTSTAT_IPIPEIFINT		(1 << 6)
+#define VPSSBL_INTSTAT_OSDINT			(1 << 5)
+#define VPSSBL_INTSTAT_VENCINT			(1 << 4)
+#define VPSSBL_INTSTAT_H3AINT			(1 << 3)
+#define VPSSBL_INTSTAT_CCDC_VDINT2		(1 << 2)
+#define VPSSBL_INTSTAT_CCDC_VDINT1		(1 << 1)
+#define VPSSBL_INTSTAT_CCDC_VDINT0		(1 << 0)
+
+/* DM365 ISP5 bit definitions */
+#define ISP5_INTSTAT_VENCINT			(1 << 21)
+#define ISP5_INTSTAT_OSDINT			(1 << 20)
+
+/* VMOD TVTYP options for HDMD=0 */
+#define SDTV_NTSC				0
+#define SDTV_PAL				1
+/* VMOD TVTYP options for HDMD=1 */
+#define HDTV_525P				0
+#define HDTV_625P				1
+#define HDTV_1080I				2
+#define HDTV_720P				3
+
+#define OSD_MODE_CS				(1 << 15)
+#define OSD_MODE_OVRSZ				(1 << 14)
+#define OSD_MODE_OHRSZ				(1 << 13)
+#define OSD_MODE_EF				(1 << 12)
+#define OSD_MODE_VVRSZ				(1 << 11)
+#define OSD_MODE_VHRSZ				(1 << 10)
+#define OSD_MODE_FSINV				(1 << 9)
+#define OSD_MODE_BCLUT				(1 << 8)
+#define OSD_MODE_CABG_SHIFT			0
+#define OSD_MODE_CABG				(0xff << 0)
+
+#define OSD_VIDWINMD_VFINV			(1 << 15)
+#define OSD_VIDWINMD_V1EFC			(1 << 14)
+#define OSD_VIDWINMD_VHZ1_SHIFT			12
+#define OSD_VIDWINMD_VHZ1			(3 << 12)
+#define OSD_VIDWINMD_VVZ1_SHIFT			10
+#define OSD_VIDWINMD_VVZ1			(3 << 10)
+#define OSD_VIDWINMD_VFF1			(1 << 9)
+#define OSD_VIDWINMD_ACT1			(1 << 8)
+#define OSD_VIDWINMD_V0EFC			(1 << 6)
+#define OSD_VIDWINMD_VHZ0_SHIFT			4
+#define OSD_VIDWINMD_VHZ0			(3 << 4)
+#define OSD_VIDWINMD_VVZ0_SHIFT			2
+#define OSD_VIDWINMD_VVZ0			(3 << 2)
+#define OSD_VIDWINMD_VFF0			(1 << 1)
+#define OSD_VIDWINMD_ACT0			(1 << 0)
+
+#define OSD_OSDWIN0MD_ATN0E			(1 << 14)
+#define OSD_OSDWIN0MD_RGB0E			(1 << 13)
+#define OSD_OSDWIN0MD_BMP0MD_SHIFT		13
+#define OSD_OSDWIN0MD_BMP0MD			(3 << 13)
+#define OSD_OSDWIN0MD_CLUTS0			(1 << 12)
+#define OSD_OSDWIN0MD_OHZ0_SHIFT		10
+#define OSD_OSDWIN0MD_OHZ0			(3 << 10)
+#define OSD_OSDWIN0MD_OVZ0_SHIFT		8
+#define OSD_OSDWIN0MD_OVZ0			(3 << 8)
+#define OSD_OSDWIN0MD_BMW0_SHIFT		6
+#define OSD_OSDWIN0MD_BMW0			(3 << 6)
+#define OSD_OSDWIN0MD_BLND0_SHIFT		3
+#define OSD_OSDWIN0MD_BLND0			(7 << 3)
+#define OSD_OSDWIN0MD_TE0			(1 << 2)
+#define OSD_OSDWIN0MD_OFF0			(1 << 1)
+#define OSD_OSDWIN0MD_OACT0			(1 << 0)
+
+#define OSD_OSDWIN1MD_OASW			(1 << 15)
+#define OSD_OSDWIN1MD_ATN1E			(1 << 14)
+#define OSD_OSDWIN1MD_RGB1E			(1 << 13)
+#define OSD_OSDWIN1MD_BMP1MD_SHIFT		13
+#define OSD_OSDWIN1MD_BMP1MD			(3 << 13)
+#define OSD_OSDWIN1MD_CLUTS1			(1 << 12)
+#define OSD_OSDWIN1MD_OHZ1_SHIFT		10
+#define OSD_OSDWIN1MD_OHZ1			(3 << 10)
+#define OSD_OSDWIN1MD_OVZ1_SHIFT		8
+#define OSD_OSDWIN1MD_OVZ1			(3 << 8)
+#define OSD_OSDWIN1MD_BMW1_SHIFT		6
+#define OSD_OSDWIN1MD_BMW1			(3 << 6)
+#define OSD_OSDWIN1MD_BLND1_SHIFT		3
+#define OSD_OSDWIN1MD_BLND1			(7 << 3)
+#define OSD_OSDWIN1MD_TE1			(1 << 2)
+#define OSD_OSDWIN1MD_OFF1			(1 << 1)
+#define OSD_OSDWIN1MD_OACT1			(1 << 0)
+
+#define OSD_OSDATRMD_OASW			(1 << 15)
+#define OSD_OSDATRMD_OHZA_SHIFT			10
+#define OSD_OSDATRMD_OHZA			(3 << 10)
+#define OSD_OSDATRMD_OVZA_SHIFT			8
+#define OSD_OSDATRMD_OVZA			(3 << 8)
+#define OSD_OSDATRMD_BLNKINT_SHIFT		6
+#define OSD_OSDATRMD_BLNKINT			(3 << 6)
+#define OSD_OSDATRMD_OFFA			(1 << 1)
+#define OSD_OSDATRMD_BLNK			(1 << 0)
+
+#define OSD_RECTCUR_RCAD_SHIFT			8
+#define OSD_RECTCUR_RCAD			(0xff << 8)
+#define OSD_RECTCUR_CLUTSR			(1 << 7)
+#define OSD_RECTCUR_RCHW_SHIFT			4
+#define OSD_RECTCUR_RCHW			(7 << 4)
+#define OSD_RECTCUR_RCVW_SHIFT			1
+#define OSD_RECTCUR_RCVW			(7 << 1)
+#define OSD_RECTCUR_RCACT			(1 << 0)
+
+#define OSD_VIDWIN0OFST_V0LO			(0x1ff << 0)
+
+#define OSD_VIDWIN1OFST_V1LO			(0x1ff << 0)
+
+#define OSD_OSDWIN0OFST_O0LO			(0x1ff << 0)
+
+#define OSD_OSDWIN1OFST_O1LO			(0x1ff << 0)
+
+#define OSD_WINOFST_AH_SHIFT			9
+
+#define OSD_VIDWIN0OFST_V0AH			(0xf << 9)
+#define OSD_VIDWIN1OFST_V1AH			(0xf << 9)
+#define OSD_OSDWIN0OFST_O0AH			(0xf << 9)
+#define OSD_OSDWIN1OFST_O1AH			(0xf << 9)
+
+#define OSD_VIDWINADH_V1AH_SHIFT		8
+#define OSD_VIDWINADH_V1AH			(0x7f << 8)
+#define OSD_VIDWINADH_V0AH_SHIFT		0
+#define OSD_VIDWINADH_V0AH			(0x7f << 0)
+
+#define OSD_VIDWIN0ADL_V0AL			(0xffff << 0)
+
+#define OSD_VIDWIN1ADL_V1AL			(0xffff << 0)
+
+#define OSD_OSDWINADH_O1AH_SHIFT		8
+#define OSD_OSDWINADH_O1AH			(0x7f << 8)
+#define OSD_OSDWINADH_O0AH_SHIFT		0
+#define OSD_OSDWINADH_O0AH			(0x7f << 0)
+
+#define OSD_OSDWIN0ADL_O0AL			(0xffff << 0)
+
+#define OSD_OSDWIN1ADL_O1AL			(0xffff << 0)
+
+#define OSD_BASEPX_BPX				(0x3ff << 0)
+
+#define OSD_BASEPY_BPY				(0x1ff << 0)
+
+#define OSD_VIDWIN0XP_V0X			(0x7ff << 0)
+
+#define OSD_VIDWIN0YP_V0Y			(0x7ff << 0)
+
+#define OSD_VIDWIN0XL_V0W			(0x7ff << 0)
+
+#define OSD_VIDWIN0YL_V0H			(0x7ff << 0)
+
+#define OSD_VIDWIN1XP_V1X			(0x7ff << 0)
+
+#define OSD_VIDWIN1YP_V1Y			(0x7ff << 0)
+
+#define OSD_VIDWIN1XL_V1W			(0x7ff << 0)
+
+#define OSD_VIDWIN1YL_V1H			(0x7ff << 0)
+
+#define OSD_OSDWIN0XP_W0X			(0x7ff << 0)
+
+#define OSD_OSDWIN0YP_W0Y			(0x7ff << 0)
+
+#define OSD_OSDWIN0XL_W0W			(0x7ff << 0)
+
+#define OSD_OSDWIN0YL_W0H			(0x7ff << 0)
+
+#define OSD_OSDWIN1XP_W1X			(0x7ff << 0)
+
+#define OSD_OSDWIN1YP_W1Y			(0x7ff << 0)
+
+#define OSD_OSDWIN1XL_W1W			(0x7ff << 0)
+
+#define OSD_OSDWIN1YL_W1H			(0x7ff << 0)
+
+#define OSD_CURXP_RCSX				(0x7ff << 0)
+
+#define OSD_CURYP_RCSY				(0x7ff << 0)
+
+#define OSD_CURXL_RCSW				(0x7ff << 0)
+
+#define OSD_CURYL_RCSH				(0x7ff << 0)
+
+#define OSD_EXTMODE_EXPMDSEL			(1 << 15)
+#define OSD_EXTMODE_SCRNHEXP_SHIFT		13
+#define OSD_EXTMODE_SCRNHEXP			(3 << 13)
+#define OSD_EXTMODE_SCRNVEXP			(1 << 12)
+#define OSD_EXTMODE_OSD1BLDCHR			(1 << 11)
+#define OSD_EXTMODE_OSD0BLDCHR			(1 << 10)
+#define OSD_EXTMODE_ATNOSD1EN			(1 << 9)
+#define OSD_EXTMODE_ATNOSD0EN			(1 << 8)
+#define OSD_EXTMODE_OSDHRSZ15			(1 << 7)
+#define OSD_EXTMODE_VIDHRSZ15			(1 << 6)
+#define OSD_EXTMODE_ZMFILV1HEN			(1 << 5)
+#define OSD_EXTMODE_ZMFILV1VEN			(1 << 4)
+#define OSD_EXTMODE_ZMFILV0HEN			(1 << 3)
+#define OSD_EXTMODE_ZMFILV0VEN			(1 << 2)
+#define OSD_EXTMODE_EXPFILHEN			(1 << 1)
+#define OSD_EXTMODE_EXPFILVEN			(1 << 0)
+
+#define OSD_MISCCTL_BLDSEL			(1 << 15)
+#define OSD_MISCCTL_S420D			(1 << 14)
+#define OSD_MISCCTL_BMAPT			(1 << 13)
+#define OSD_MISCCTL_DM365M			(1 << 12)
+#define OSD_MISCCTL_RGBEN			(1 << 7)
+#define OSD_MISCCTL_RGBWIN			(1 << 6)
+#define OSD_MISCCTL_DMANG			(1 << 6)
+#define OSD_MISCCTL_TMON			(1 << 5)
+#define OSD_MISCCTL_RSEL			(1 << 4)
+#define OSD_MISCCTL_CPBSY			(1 << 3)
+#define OSD_MISCCTL_PPSW			(1 << 2)
+#define OSD_MISCCTL_PPRV			(1 << 1)
+
+#define OSD_CLUTRAMYCB_Y_SHIFT			8
+#define OSD_CLUTRAMYCB_Y			(0xff << 8)
+#define OSD_CLUTRAMYCB_CB_SHIFT			0
+#define OSD_CLUTRAMYCB_CB			(0xff << 0)
+
+#define OSD_CLUTRAMCR_CR_SHIFT			8
+#define OSD_CLUTRAMCR_CR			(0xff << 8)
+#define OSD_CLUTRAMCR_CADDR_SHIFT		0
+#define OSD_CLUTRAMCR_CADDR			(0xff << 0)
+
+#define OSD_TRANSPVAL_RGBTRANS			(0xffff << 0)
+
+#define OSD_TRANSPVALL_RGBL			(0xffff << 0)
+
+#define OSD_TRANSPVALU_Y_SHIFT			8
+#define OSD_TRANSPVALU_Y			(0xff << 8)
+#define OSD_TRANSPVALU_RGBU_SHIFT		0
+#define OSD_TRANSPVALU_RGBU			(0xff << 0)
+
+#define OSD_TRANSPBMPIDX_BMP1_SHIFT		8
+#define OSD_TRANSPBMPIDX_BMP1			(0xff << 8)
+#define OSD_TRANSPBMPIDX_BMP0_SHIFT		0
+#define OSD_TRANSPBMPIDX_BMP0			0xff
+
+#endif				/* _DAVINCI_VPBE_H_ */
diff --git a/drivers/media/video/davinci/vpbe_venc.c b/drivers/media/video/davinci/vpbe_venc.c
new file mode 100644
index 0000000..03a3e5c
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_venc.c
@@ -0,0 +1,566 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+
+#include <mach/hardware.h>
+#include <mach/mux.h>
+#include <mach/io.h>
+#include <mach/i2c.h>
+
+#include <linux/io.h>
+
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpss.h>
+#include <media/v4l2-device.h>
+
+#include "vpbe_venc_regs.h"
+
+#define MODULE_NAME	VPBE_VENC_SUBDEV_NAME
+
+static int debug = 2;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level 0-2");
+
+struct venc_state {
+	struct v4l2_subdev sd;
+	struct venc_callback *callback;
+	struct venc_platform_data *pdata;
+	struct device *pdev;
+	u32 output;
+	v4l2_std_id std;
+	spinlock_t lock;
+	void __iomem *venc_base;
+	void __iomem *vdaccfg_reg;
+};
+
+static inline struct venc_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct venc_state, sd);
+}
+
+static inline u32 venc_read(struct v4l2_subdev *sd, u32 offset)
+{
+	struct venc_state *venc = to_state(sd);
+
+	return readl(venc->venc_base + offset);
+}
+
+static inline u32 venc_write(struct v4l2_subdev *sd, u32 offset, u32 val)
+{
+	struct venc_state *venc = to_state(sd);
+
+	writel(val, (venc->venc_base + offset));
+
+	return val;
+}
+
+static inline u32 venc_modify(struct v4l2_subdev *sd, u32 offset,
+				 u32 val, u32 mask)
+{
+	u32 new_val = (venc_read(sd, offset) & ~mask) | (val & mask);
+
+	venc_write(sd, offset, new_val);
+
+	return new_val;
+}
+
+static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val)
+{
+	struct venc_state *venc = to_state(sd);
+
+	writel(val, venc->vdaccfg_reg);
+
+	val = readl(venc->vdaccfg_reg);
+
+	return val;
+}
+
+/* This function sets the dac of the VPBE for various outputs
+ */
+static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index)
+{
+	switch (out_index) {
+	case 0:
+		v4l2_dbg(debug, 1, sd, "Setting output to Composite\n");
+		venc_write(sd, VENC_DACSEL, 0);
+		break;
+	case 1:
+		v4l2_dbg(debug, 1, sd, "Setting output to S-Video\n");
+		venc_write(sd, VENC_DACSEL, 0x210);
+		break;
+	case  2:
+		venc_write(sd, VENC_DACSEL, 0x543);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable)
+{
+	v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n");
+
+	if (benable) {
+		venc_write(sd, VENC_VMOD, 0);
+		venc_write(sd, VENC_CVBS, 0);
+		venc_write(sd, VENC_LCDOUT, 0);
+		venc_write(sd, VENC_HSPLS, 0);
+		venc_write(sd, VENC_HSTART, 0);
+		venc_write(sd, VENC_HVALID, 0);
+		venc_write(sd, VENC_HINT, 0);
+		venc_write(sd, VENC_VSPLS, 0);
+		venc_write(sd, VENC_VSTART, 0);
+		venc_write(sd, VENC_VVALID, 0);
+		venc_write(sd, VENC_VINT, 0);
+		venc_write(sd, VENC_YCCCTL, 0);
+		venc_write(sd, VENC_DACSEL, 0);
+
+	} else {
+		venc_write(sd, VENC_VMOD, 0);
+		/* disable VCLK output pin enable */
+		venc_write(sd, VENC_VIDCTL, 0x141);
+
+		/* Disable output sync pins */
+		venc_write(sd, VENC_SYNCCTL, 0);
+
+		/* Disable DCLOCK */
+		venc_write(sd, VENC_DCLKCTL, 0);
+		venc_write(sd, VENC_DRGBX1, 0x0000057C);
+
+		/* Disable LCD output control (accepting default polarity) */
+		venc_write(sd, VENC_LCDOUT, 0);
+		venc_write(sd, VENC_CMPNT, 0x100);
+		venc_write(sd, VENC_HSPLS, 0);
+		venc_write(sd, VENC_HINT, 0);
+		venc_write(sd, VENC_HSTART, 0);
+		venc_write(sd, VENC_HVALID, 0);
+
+		venc_write(sd, VENC_VSPLS, 0);
+		venc_write(sd, VENC_VINT, 0);
+		venc_write(sd, VENC_VSTART, 0);
+		venc_write(sd, VENC_VVALID, 0);
+
+		venc_write(sd, VENC_HSDLY, 0);
+		venc_write(sd, VENC_VSDLY, 0);
+
+		venc_write(sd, VENC_YCCCTL, 0);
+		venc_write(sd, VENC_VSTARTA, 0);
+
+		/* Set OSD clock and OSD Sync Adavance registers */
+		venc_write(sd, VENC_OSDCLK0, 1);
+		venc_write(sd, VENC_OSDCLK1, 2);
+	}
+}
+
+/*
+ * setting NTSC mode
+ */
+static int venc_set_ntsc(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_ntsc\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
+	if (pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_525_60) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
+	venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
+	/* Set REC656 Mode */
+	venc_write(sd, VENC_YCCCTL, 0x1);
+	venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ);
+	venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS);
+
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+			VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
+	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_TVTYP_SHIFT),
+			VENC_VMOD_TVTYP);
+	venc_write(sd, VENC_DACTST, 0x0);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * setting PAL mode
+ */
+static int venc_set_pal(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+
+	v4l2_dbg(debug, 2, sd, "venc_set_pal\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
+	if (venc->pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_625_50) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
+	venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
+	/* Set REC656 Mode */
+	venc_write(sd, VENC_YCCCTL, 0x1);
+
+	venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT,
+			VENC_SYNCCTL_OVD);
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD,
+			(1 << VENC_VMOD_VIE_SHIFT),
+			VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD,
+			(0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
+	venc_modify(sd, VENC_VMOD,
+			(1 << VENC_VMOD_TVTYP_SHIFT),
+			VENC_VMOD_TVTYP);
+	venc_write(sd, VENC_DACTST, 0x0);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * venc_set_480p59_94
+ *
+ * This function configures the video encoder to EDTV(525p) component setting.
+ */
+static int venc_set_480p59_94(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_480P59_94) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	venc_write(sd, VENC_OSDCLK0, 0);
+	venc_write(sd, VENC_OSDCLK1, 1);
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
+		    VENC_VDPRO_DAFRQ);
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
+		    VENC_VDPRO_DAUPS);
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+		    VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
+	venc_modify(sd, VENC_VMOD, (HDTV_525P << VENC_VMOD_TVTYP_SHIFT),
+		    VENC_VMOD_TVTYP);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
+		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
+
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * venc_set_625p
+ *
+ * This function configures the video encoder to HDTV(625p) component setting
+ */
+static int venc_set_576p50(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_576p50\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_576P50) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	venc_write(sd, VENC_OSDCLK0, 0);
+	venc_write(sd, VENC_OSDCLK1, 1);
+
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
+		    VENC_VDPRO_DAFRQ);
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
+		    VENC_VDPRO_DAUPS);
+
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+		    VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
+	venc_modify(sd, VENC_VMOD, (HDTV_625P << VENC_VMOD_TVTYP_SHIFT),
+		    VENC_VMOD_TVTYP);
+
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
+		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+	v4l2_dbg(debug, 1, sd, "venc_s_std_output\n");
+
+	if (norm & V4L2_STD_525_60)
+		return venc_set_ntsc(sd);
+	else if (norm & V4L2_STD_625_50)
+		return venc_set_pal(sd);
+
+	return -EINVAL;
+}
+
+static int venc_s_dv_preset(struct v4l2_subdev *sd,
+			    struct v4l2_dv_preset *dv_preset)
+{
+	v4l2_dbg(debug, 1, sd, "venc_s_dv_preset\n");
+
+	if (dv_preset->preset == V4L2_DV_576P50)
+		return venc_set_576p50(sd);
+	else if (dv_preset->preset == V4L2_DV_480P59_94)
+		return venc_set_480p59_94(sd);
+
+	return -EINVAL;
+}
+
+static int venc_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
+			  u32 config)
+{
+	struct venc_state *venc = to_state(sd);
+	int ret;
+
+	v4l2_dbg(debug, 1, sd, "venc_s_routing\n");
+
+	ret = venc_set_dac(sd, output);
+	if (!ret)
+		venc->output = output;
+
+	return ret;
+}
+
+static long venc_ioctl(struct v4l2_subdev *sd,
+			unsigned int cmd,
+			void *arg)
+{
+	u32 val;
+
+	switch (cmd) {
+	case VENC_GET_FLD:
+		val = venc_read(sd, VENC_VSTAT);
+		*((int *)arg) = ((val & VENC_VSTAT_FIDST) ==
+		VENC_VSTAT_FIDST);
+		break;
+	default:
+		v4l2_err(sd, "Wrong IOCTL cmd\n");
+		break;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops venc_core_ops = {
+	.ioctl      = venc_ioctl,
+};
+
+static const struct v4l2_subdev_video_ops venc_video_ops = {
+	.s_routing = venc_s_routing,
+	.s_std_output = venc_s_std_output,
+	.s_dv_preset = venc_s_dv_preset,
+};
+
+static const struct v4l2_subdev_ops venc_ops = {
+	.core = &venc_core_ops,
+	.video = &venc_video_ops,
+};
+
+static int venc_initialize(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	int ret;
+
+	/* Set default to output to composite and std to NTSC */
+	venc->output = 0;
+	venc->std = V4L2_STD_525_60;
+
+	ret = venc_s_routing(sd, 0, venc->output, 0);
+	if (ret < 0) {
+		v4l2_err(sd, "Error setting output during init\n");
+		return -EINVAL;
+	}
+
+	ret = venc_s_std_output(sd, venc->std);
+	if (ret < 0) {
+		v4l2_err(sd, "Error setting std during init\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int venc_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct venc_state **venc = data;
+
+	if (strcmp(MODULE_NAME, pdev->name) == 0)
+		*venc = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
+		const char *venc_name)
+{
+	struct venc_state *venc;
+	int err;
+
+	err = bus_for_each_dev(&platform_bus_type, NULL, &venc,
+			venc_device_get);
+	if (venc == NULL)
+		return NULL;
+
+	v4l2_subdev_init(&venc->sd, &venc_ops);
+
+	strcpy(venc->sd.name, venc_name);
+	if (v4l2_device_register_subdev(v4l2_dev, &venc->sd) < 0) {
+		v4l2_err(v4l2_dev,
+			"vpbe unable to register venc sub device\n");
+		return NULL;
+	}
+	if (venc_initialize(&venc->sd)) {
+		v4l2_err(v4l2_dev,
+			"vpbe venc initialization failed\n");
+		return NULL;
+	}
+
+	return &venc->sd;
+}
+EXPORT_SYMBOL(venc_sub_dev_init);
+
+static int venc_probe(struct platform_device *pdev)
+{
+	struct venc_state *venc;
+	struct resource *res;
+	int ret;
+
+	venc = kzalloc(sizeof(struct venc_state), GFP_KERNEL);
+	if (venc == NULL)
+		return -ENOMEM;
+
+	venc->pdev = &pdev->dev;
+	venc->pdata = pdev->dev.platform_data;
+	if (NULL == venc->pdata) {
+		dev_err(venc->pdev, "Unable to get platform data for"
+			" VENC sub device");
+		ret = -ENOENT;
+		goto free_mem;
+	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(venc->pdev,
+			"Unable to get VENC register address map\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), "venc")) {
+		dev_err(venc->pdev, "Unable to reserve VENC MMIO region\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+
+	venc->venc_base = ioremap_nocache(res->start, resource_size(res));
+	if (!venc->venc_base) {
+		dev_err(venc->pdev, "Unable to map VENC IO space\n");
+		ret = -ENODEV;
+		goto release_venc_mem_region;
+	}
+
+	spin_lock_init(&venc->lock);
+	platform_set_drvdata(pdev, venc);
+	dev_notice(venc->pdev, "VENC sub device probe success\n");
+	return 0;
+
+release_venc_mem_region:
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+free_mem:
+	kfree(venc);
+	return ret;
+}
+
+static int venc_remove(struct platform_device *pdev)
+{
+	struct venc_state *venc = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iounmap((void *)venc->venc_base);
+	release_mem_region(res->start, resource_size(res));
+	kfree(venc);
+
+	return 0;
+}
+
+static struct platform_driver venc_driver = {
+	.probe		= venc_probe,
+	.remove		= venc_remove,
+	.driver		= {
+		.name	= MODULE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int venc_init(void)
+{
+	if (platform_driver_register(&venc_driver)) {
+		printk(KERN_ERR "Unable to register venc driver\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static void venc_exit(void)
+{
+	platform_driver_unregister(&venc_driver);
+	return;
+}
+
+module_init(venc_init);
+module_exit(venc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VPBE VENC Driver");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_venc_regs.h b/drivers/media/video/davinci/vpbe_venc_regs.h
new file mode 100644
index 0000000..947cb15
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_venc_regs.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2006-2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2..
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_VENC_REGS_H
+#define _VPBE_VENC_REGS_H
+
+/* VPBE Video Encoder / Digital LCD Subsystem Registers (VENC) */
+#define VENC_VMOD				0x00
+#define VENC_VIDCTL				0x04
+#define VENC_VDPRO				0x08
+#define VENC_SYNCCTL				0x0C
+#define VENC_HSPLS				0x10
+#define VENC_VSPLS				0x14
+#define VENC_HINT				0x18
+#define VENC_HSTART				0x1C
+#define VENC_HVALID				0x20
+#define VENC_VINT				0x24
+#define VENC_VSTART				0x28
+#define VENC_VVALID				0x2C
+#define VENC_HSDLY				0x30
+#define VENC_VSDLY				0x34
+#define VENC_YCCCTL				0x38
+#define VENC_RGBCTL				0x3C
+#define VENC_RGBCLP				0x40
+#define VENC_LINECTL				0x44
+#define VENC_CULLLINE				0x48
+#define VENC_LCDOUT				0x4C
+#define VENC_BRTS				0x50
+#define VENC_BRTW				0x54
+#define VENC_ACCTL				0x58
+#define VENC_PWMP				0x5C
+#define VENC_PWMW				0x60
+#define VENC_DCLKCTL				0x64
+#define VENC_DCLKPTN0				0x68
+#define VENC_DCLKPTN1				0x6C
+#define VENC_DCLKPTN2				0x70
+#define VENC_DCLKPTN3				0x74
+#define VENC_DCLKPTN0A				0x78
+#define VENC_DCLKPTN1A				0x7C
+#define VENC_DCLKPTN2A				0x80
+#define VENC_DCLKPTN3A				0x84
+#define VENC_DCLKHS				0x88
+#define VENC_DCLKHSA				0x8C
+#define VENC_DCLKHR				0x90
+#define VENC_DCLKVS				0x94
+#define VENC_DCLKVR				0x98
+#define VENC_CAPCTL				0x9C
+#define VENC_CAPDO				0xA0
+#define VENC_CAPDE				0xA4
+#define VENC_ATR0				0xA8
+#define VENC_ATR1				0xAC
+#define VENC_ATR2				0xB0
+#define VENC_VSTAT				0xB8
+#define VENC_RAMADR				0xBC
+#define VENC_RAMPORT				0xC0
+#define VENC_DACTST				0xC4
+#define VENC_YCOLVL				0xC8
+#define VENC_SCPROG				0xCC
+#define VENC_CVBS				0xDC
+#define VENC_CMPNT				0xE0
+#define VENC_ETMG0				0xE4
+#define VENC_ETMG1				0xE8
+#define VENC_ETMG2				0xEC
+#define VENC_ETMG3				0xF0
+#define VENC_DACSEL				0xF4
+#define VENC_ARGBX0				0x100
+#define VENC_ARGBX1				0x104
+#define VENC_ARGBX2				0x108
+#define VENC_ARGBX3				0x10C
+#define VENC_ARGBX4				0x110
+#define VENC_DRGBX0				0x114
+#define VENC_DRGBX1				0x118
+#define VENC_DRGBX2				0x11C
+#define VENC_DRGBX3				0x120
+#define VENC_DRGBX4				0x124
+#define VENC_VSTARTA				0x128
+#define VENC_OSDCLK0				0x12C
+#define VENC_OSDCLK1				0x130
+#define VENC_HVLDCL0				0x134
+#define VENC_HVLDCL1				0x138
+#define VENC_OSDHADV				0x13C
+#define VENC_CLKCTL				0x140
+#define VENC_GAMCTL				0x144
+#define VENC_XHINTVL				0x174
+
+/* bit definitions */
+#define VPBE_PCR_VENC_DIV			(1 << 1)
+#define VPBE_PCR_CLK_OFF			(1 << 0)
+
+#define VENC_VMOD_VDMD_SHIFT			12
+#define VENC_VMOD_VDMD_YCBCR16			0
+#define VENC_VMOD_VDMD_YCBCR8			1
+#define VENC_VMOD_VDMD_RGB666			2
+#define VENC_VMOD_VDMD_RGB8			3
+#define VENC_VMOD_VDMD_EPSON			4
+#define VENC_VMOD_VDMD_CASIO			5
+#define VENC_VMOD_VDMD_UDISPQVGA		6
+#define VENC_VMOD_VDMD_STNLCD			7
+#define VENC_VMOD_VIE_SHIFT			1
+#define VENC_VMOD_VDMD				(7 << 12)
+#define VENC_VMOD_ITLCL				(1 << 11)
+#define VENC_VMOD_ITLC				(1 << 10)
+#define VENC_VMOD_NSIT				(1 << 9)
+#define VENC_VMOD_HDMD				(1 << 8)
+#define VENC_VMOD_TVTYP_SHIFT			6
+#define VENC_VMOD_TVTYP				(3 << 6)
+#define VENC_VMOD_SLAVE				(1 << 5)
+#define VENC_VMOD_VMD				(1 << 4)
+#define VENC_VMOD_BLNK				(1 << 3)
+#define VENC_VMOD_VIE				(1 << 1)
+#define VENC_VMOD_VENC				(1 << 0)
+
+/* VMOD TVTYP options for HDMD=0 */
+#define SDTV_NTSC				0
+#define SDTV_PAL				1
+/* VMOD TVTYP options for HDMD=1 */
+#define HDTV_525P				0
+#define HDTV_625P				1
+#define HDTV_1080I				2
+#define HDTV_720P				3
+
+#define VENC_VIDCTL_VCLKP			(1 << 14)
+#define VENC_VIDCTL_VCLKE_SHIFT			13
+#define VENC_VIDCTL_VCLKE			(1 << 13)
+#define VENC_VIDCTL_VCLKZ_SHIFT			12
+#define VENC_VIDCTL_VCLKZ			(1 << 12)
+#define VENC_VIDCTL_SYDIR_SHIFT			8
+#define VENC_VIDCTL_SYDIR			(1 << 8)
+#define VENC_VIDCTL_DOMD_SHIFT			4
+#define VENC_VIDCTL_DOMD			(3 << 4)
+#define VENC_VIDCTL_YCDIR_SHIFT			0
+#define VENC_VIDCTL_YCDIR			(1 << 0)
+
+#define VENC_VDPRO_ATYCC_SHIFT			5
+#define VENC_VDPRO_ATYCC			(1 << 5)
+#define VENC_VDPRO_ATCOM_SHIFT			4
+#define VENC_VDPRO_ATCOM			(1 << 4)
+#define VENC_VDPRO_DAFRQ			(1 << 3)
+#define VENC_VDPRO_DAUPS			(1 << 2)
+#define VENC_VDPRO_CUPS				(1 << 1)
+#define VENC_VDPRO_YUPS				(1 << 0)
+
+#define VENC_SYNCCTL_VPL_SHIFT			3
+#define VENC_SYNCCTL_VPL			(1 << 3)
+#define VENC_SYNCCTL_HPL_SHIFT			2
+#define VENC_SYNCCTL_HPL			(1 << 2)
+#define VENC_SYNCCTL_SYEV_SHIFT			1
+#define VENC_SYNCCTL_SYEV			(1 << 1)
+#define VENC_SYNCCTL_SYEH_SHIFT			0
+#define VENC_SYNCCTL_SYEH			(1 << 0)
+#define VENC_SYNCCTL_OVD_SHIFT			14
+#define VENC_SYNCCTL_OVD			(1 << 14)
+
+#define VENC_DCLKCTL_DCKEC_SHIFT		11
+#define VENC_DCLKCTL_DCKEC			(1 << 11)
+#define VENC_DCLKCTL_DCKPW_SHIFT		0
+#define VENC_DCLKCTL_DCKPW			(0x3f << 0)
+
+#define VENC_VSTAT_FIDST			(1 << 4)
+
+#define VENC_CMPNT_MRGB_SHIFT			14
+#define VENC_CMPNT_MRGB				(1 << 14)
+
+#endif				/* _VPBE_VENC_REGS_H */
diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c
index d93ad74..49e4deb 100644
--- a/drivers/media/video/davinci/vpif_capture.c
+++ b/drivers/media/video/davinci/vpif_capture.c
@@ -33,7 +33,6 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/version.h>
 #include <linux/slab.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -44,6 +43,7 @@
 
 MODULE_DESCRIPTION("TI DaVinci VPIF Capture driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(VPIF_CAPTURE_VERSION);
 
 #define vpif_err(fmt, arg...)	v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg)
 #define vpif_dbg(level, debug, fmt, arg...)	\
@@ -1677,7 +1677,6 @@ static int vpif_querycap(struct file *file, void  *priv,
 {
 	struct vpif_capture_config *config = vpif_dev->platform_data;
 
-	cap->version = VPIF_CAPTURE_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 	strlcpy(cap->driver, "vpif capture", sizeof(cap->driver));
 	strlcpy(cap->bus_info, "DM646x Platform", sizeof(cap->bus_info));
@@ -2211,10 +2210,8 @@ static __init int vpif_probe(struct platform_device *pdev)
 		vfd->v4l2_dev = &vpif_obj.v4l2_dev;
 		vfd->release = video_device_release;
 		snprintf(vfd->name, sizeof(vfd->name),
-			 "DM646x_VPIFCapture_DRIVER_V%d.%d.%d",
-			 (VPIF_CAPTURE_VERSION_CODE >> 16) & 0xff,
-			 (VPIF_CAPTURE_VERSION_CODE >> 8) & 0xff,
-			 (VPIF_CAPTURE_VERSION_CODE) & 0xff);
+			 "DM646x_VPIFCapture_DRIVER_V%s",
+			 VPIF_CAPTURE_VERSION);
 		/* Set video_dev to the video device */
 		ch->video_dev = vfd;
 	}
diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h
index 7a4196d..064550f 100644
--- a/drivers/media/video/davinci/vpif_capture.h
+++ b/drivers/media/video/davinci/vpif_capture.h
@@ -23,7 +23,6 @@
 
 /* Header files */
 #include <linux/videodev2.h>
-#include <linux/version.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
 #include <media/videobuf-core.h>
@@ -33,11 +32,7 @@
 #include "vpif.h"
 
 /* Macros */
-#define VPIF_MAJOR_RELEASE		0
-#define VPIF_MINOR_RELEASE		0
-#define VPIF_BUILD			1
-#define VPIF_CAPTURE_VERSION_CODE	((VPIF_MAJOR_RELEASE << 16) | \
-	(VPIF_MINOR_RELEASE << 8) | VPIF_BUILD)
+#define VPIF_CAPTURE_VERSION		"0.0.2"
 
 #define VPIF_VALID_FIELD(field)		(((V4L2_FIELD_ANY == field) || \
 	(V4L2_FIELD_NONE == field)) || \
diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
index cdf659a..286f029 100644
--- a/drivers/media/video/davinci/vpif_display.c
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -29,7 +29,6 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/version.h>
 #include <linux/slab.h>
 
 #include <asm/irq.h>
@@ -47,6 +46,7 @@
 
 MODULE_DESCRIPTION("TI DaVinci VPIF Display driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(VPIF_DISPLAY_VERSION);
 
 #define DM646X_V4L2_STD (V4L2_STD_525_60 | V4L2_STD_625_50)
 
@@ -701,7 +701,6 @@ static int vpif_querycap(struct file *file, void  *priv,
 {
 	struct vpif_display_config *config = vpif_dev->platform_data;
 
-	cap->version = VPIF_DISPLAY_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
 	strlcpy(cap->driver, "vpif display", sizeof(cap->driver));
 	strlcpy(cap->bus_info, "Platform", sizeof(cap->bus_info));
@@ -1740,10 +1739,8 @@ static __init int vpif_probe(struct platform_device *pdev)
 		vfd->v4l2_dev = &vpif_obj.v4l2_dev;
 		vfd->release = video_device_release;
 		snprintf(vfd->name, sizeof(vfd->name),
-			 "DM646x_VPIFDisplay_DRIVER_V%d.%d.%d",
-			 (VPIF_DISPLAY_VERSION_CODE >> 16) & 0xff,
-			 (VPIF_DISPLAY_VERSION_CODE >> 8) & 0xff,
-			 (VPIF_DISPLAY_VERSION_CODE) & 0xff);
+			 "DM646x_VPIFDisplay_DRIVER_V%s",
+			 VPIF_DISPLAY_VERSION);
 
 		/* Set video_dev to the video device */
 		ch->video_dev = vfd;
diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h
index b53aaa8..5d1936d 100644
--- a/drivers/media/video/davinci/vpif_display.h
+++ b/drivers/media/video/davinci/vpif_display.h
@@ -18,7 +18,6 @@
 
 /* Header files */
 #include <linux/videodev2.h>
-#include <linux/version.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
 #include <media/videobuf-core.h>
@@ -27,12 +26,7 @@
 #include "vpif.h"
 
 /* Macros */
-#define VPIF_MAJOR_RELEASE	(0)
-#define VPIF_MINOR_RELEASE	(0)
-#define VPIF_BUILD		(1)
-
-#define VPIF_DISPLAY_VERSION_CODE \
-	((VPIF_MAJOR_RELEASE << 16) | (VPIF_MINOR_RELEASE << 8) | VPIF_BUILD)
+#define VPIF_DISPLAY_VERSION	"0.0.2"
 
 #define VPIF_VALID_FIELD(field) \
 	(((V4L2_FIELD_ANY == field) || (V4L2_FIELD_NONE == field)) || \
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 3cb78f2..281ee42 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -3,7 +3,6 @@ config VIDEO_EM28XX
 	depends on VIDEO_DEV && I2C
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on RC_CORE
 	select VIDEOBUF_VMALLOC
 	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
@@ -40,7 +39,18 @@ config VIDEO_EM28XX_DVB
 	select DVB_S921 if !DVB_FE_CUSTOMISE
 	select DVB_DRXD if !DVB_FE_CUSTOMISE
 	select DVB_CXD2820R if !DVB_FE_CUSTOMISE
+	select DVB_DRXK if !DVB_FE_CUSTOMISE
+	select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
 	select VIDEOBUF_DVB
 	---help---
 	  This adds support for DVB cards based on the
 	  Empiatech em28xx chips.
+
+config VIDEO_EM28XX_RC
+        bool "EM28XX Remote Controller support"
+        depends on RC_CORE
+        depends on VIDEO_EM28XX
+        depends on !(RC_CORE=m && VIDEO_EM28XX=y)
+        default y
+        ---help---
+          Enables Remote Controller support on em28xx driver.
diff --git a/drivers/media/video/em28xx/Makefile b/drivers/media/video/em28xx/Makefile
index d0f093d..38aaa00 100644
--- a/drivers/media/video/em28xx/Makefile
+++ b/drivers/media/video/em28xx/Makefile
@@ -1,5 +1,7 @@
-em28xx-objs     := em28xx-video.o em28xx-i2c.o em28xx-cards.o em28xx-core.o \
-		   em28xx-input.o em28xx-vbi.o
+em28xx-y :=	em28xx-video.o em28xx-i2c.o em28xx-cards.o
+em28xx-y +=	em28xx-core.o  em28xx-vbi.o
+
+em28xx-$(CONFIG_VIDEO_EM28XX_RC) += em28xx-input.o
 
 em28xx-alsa-objs := em28xx-audio.o
 
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index 3c48a72..cff0768 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -3,9 +3,9 @@
  *
  *  Copyright (C) 2006 Markus Rechberger <mrechberger@gmail.com>
  *
- *  Copyright (C) 2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *  Copyright (C) 2007-2011 Mauro Carvalho Chehab <mchehab@redhat.com>
  *	- Port to work with the in-kernel driver
- *	- Several cleanups
+ *	- Cleanups, fixes, alsa-controls, etc.
  *
  *  This driver is based on my previous au600 usb pstn audio driver
  *  and inherits all the copyrights
@@ -41,6 +41,7 @@
 #include <sound/info.h>
 #include <sound/initval.h>
 #include <sound/control.h>
+#include <sound/tlv.h>
 #include <media/v4l2-common.h>
 #include "em28xx.h"
 
@@ -212,9 +213,12 @@ static int em28xx_init_audio_isoc(struct em28xx *dev)
 	for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
 		errCode = usb_submit_urb(dev->adev.urb[i], GFP_ATOMIC);
 		if (errCode) {
+			em28xx_errdev("submit of audio urb failed\n");
 			em28xx_deinit_isoc_audio(dev);
+			atomic_set(&dev->stream_started, 0);
 			return errCode;
 		}
+
 	}
 
 	return 0;
@@ -245,6 +249,7 @@ static struct snd_pcm_hardware snd_em28xx_hw_capture = {
 	.info = SNDRV_PCM_INFO_BLOCK_TRANSFER |
 		SNDRV_PCM_INFO_MMAP           |
 		SNDRV_PCM_INFO_INTERLEAVED    |
+		SNDRV_PCM_INFO_BATCH	      |
 		SNDRV_PCM_INFO_MMAP_VALID,
 
 	.formats = SNDRV_PCM_FMTBIT_S16_LE,
@@ -276,24 +281,27 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream)
 		return -ENODEV;
 	}
 
-	/* Sets volume, mute, etc */
+	runtime->hw = snd_em28xx_hw_capture;
+	if ((dev->alt == 0 || dev->audio_ifnum) && dev->adev.users == 0) {
+		if (dev->audio_ifnum)
+			dev->alt = 1;
+		else
+			dev->alt = 7;
 
-	dev->mute = 0;
-	mutex_lock(&dev->lock);
-	ret = em28xx_audio_analog_set(dev);
-	if (ret < 0)
-		goto err;
+		dprintk("changing alternate number on interface %d to %d\n",
+			dev->audio_ifnum, dev->alt);
+		usb_set_interface(dev->udev, dev->audio_ifnum, dev->alt);
 
-	runtime->hw = snd_em28xx_hw_capture;
-	if (dev->alt == 0 && dev->adev.users == 0) {
-		int errCode;
-		dev->alt = 7;
-		dprintk("changing alternate number to 7\n");
-		errCode = usb_set_interface(dev->udev, 0, 7);
-	}
+		/* Sets volume, mute, etc */
+		dev->mute = 0;
+		mutex_lock(&dev->lock);
+		ret = em28xx_audio_analog_set(dev);
+		if (ret < 0)
+			goto err;
 
-	dev->adev.users++;
-	mutex_unlock(&dev->lock);
+		dev->adev.users++;
+		mutex_unlock(&dev->lock);
+	}
 
 	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
 	dev->adev.capture_pcm_substream = substream;
@@ -342,6 +350,8 @@ static int snd_em28xx_hw_capture_params(struct snd_pcm_substream *substream,
 
 	ret = snd_pcm_alloc_vmalloc_buffer(substream,
 				params_buffer_bytes(hw_params));
+	if (ret < 0)
+		return ret;
 	format = params_format(hw_params);
 	rate = params_rate(hw_params);
 	channels = params_channels(hw_params);
@@ -393,20 +403,24 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream,
 				      int cmd)
 {
 	struct em28xx *dev = snd_pcm_substream_chip(substream);
-	int retval;
+	int retval = 0;
 
 	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: /* fall through */
+	case SNDRV_PCM_TRIGGER_RESUME: /* fall through */
 	case SNDRV_PCM_TRIGGER_START:
 		atomic_set(&dev->stream_started, 1);
 		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH: /* fall through */
+	case SNDRV_PCM_TRIGGER_SUSPEND: /* fall through */
 	case SNDRV_PCM_TRIGGER_STOP:
-		atomic_set(&dev->stream_started, 1);
+		atomic_set(&dev->stream_started, 0);
 		break;
 	default:
 		retval = -EINVAL;
 	}
 	schedule_work(&dev->wq_trigger);
-	return 0;
+	return retval;
 }
 
 static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream
@@ -432,6 +446,179 @@ static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
 	return vmalloc_to_page(pageptr);
 }
 
+/*
+ * AC97 volume control support
+ */
+static int em28xx_vol_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *info)
+{
+	info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	info->count = 2;
+	info->value.integer.min = 0;
+	info->value.integer.max = 0x1f;
+
+	return 0;
+}
+
+static int em28xx_vol_put(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct em28xx *dev = snd_kcontrol_chip(kcontrol);
+	u16 val = (0x1f - (value->value.integer.value[0] & 0x1f)) |
+		  (0x1f - (value->value.integer.value[1] & 0x1f)) << 8;
+	int rc;
+
+	mutex_lock(&dev->lock);
+	rc = em28xx_read_ac97(dev, kcontrol->private_value);
+	if (rc < 0)
+		goto err;
+
+	val |= rc & 0x8000;	/* Preserve the mute flag */
+
+	rc = em28xx_write_ac97(dev, kcontrol->private_value, val);
+	if (rc < 0)
+		goto err;
+
+	dprintk("%sleft vol %d, right vol %d (0x%04x) to ac97 volume control 0x%04x\n",
+		(val & 0x8000) ? "muted " : "",
+		0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f),
+		val, (int)kcontrol->private_value);
+
+err:
+	mutex_unlock(&dev->lock);
+	return rc;
+}
+
+static int em28xx_vol_get(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct em28xx *dev = snd_kcontrol_chip(kcontrol);
+	int val;
+
+	mutex_lock(&dev->lock);
+	val = em28xx_read_ac97(dev, kcontrol->private_value);
+	mutex_unlock(&dev->lock);
+	if (val < 0)
+		return val;
+
+	dprintk("%sleft vol %d, right vol %d (0x%04x) from ac97 volume control 0x%04x\n",
+		(val & 0x8000) ? "muted " : "",
+		0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f),
+		val, (int)kcontrol->private_value);
+
+	value->value.integer.value[0] = 0x1f - (val & 0x1f);
+	value->value.integer.value[1] = 0x1f - ((val << 8) & 0x1f);
+
+	return 0;
+}
+
+static int em28xx_vol_put_mute(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct em28xx *dev = snd_kcontrol_chip(kcontrol);
+	u16 val = value->value.integer.value[0];
+	int rc;
+
+	mutex_lock(&dev->lock);
+	rc = em28xx_read_ac97(dev, kcontrol->private_value);
+	if (rc < 0)
+		goto err;
+
+	if (val)
+		rc &= 0x1f1f;
+	else
+		rc |= 0x8000;
+
+	rc = em28xx_write_ac97(dev, kcontrol->private_value, rc);
+	if (rc < 0)
+		goto err;
+
+	dprintk("%sleft vol %d, right vol %d (0x%04x) to ac97 volume control 0x%04x\n",
+		(val & 0x8000) ? "muted " : "",
+		0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f),
+		val, (int)kcontrol->private_value);
+
+err:
+	mutex_unlock(&dev->lock);
+	return rc;
+}
+
+static int em28xx_vol_get_mute(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct em28xx *dev = snd_kcontrol_chip(kcontrol);
+	int val;
+
+	mutex_lock(&dev->lock);
+	val = em28xx_read_ac97(dev, kcontrol->private_value);
+	mutex_unlock(&dev->lock);
+	if (val < 0)
+		return val;
+
+	if (val & 0x8000)
+		value->value.integer.value[0] = 0;
+	else
+		value->value.integer.value[0] = 1;
+
+	dprintk("%sleft vol %d, right vol %d (0x%04x) from ac97 volume control 0x%04x\n",
+		(val & 0x8000) ? "muted " : "",
+		0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f),
+		val, (int)kcontrol->private_value);
+
+	return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(em28xx_db_scale, -3450, 150, 0);
+
+static int em28xx_cvol_new(struct snd_card *card, struct em28xx *dev,
+			   char *name, int id)
+{
+	int err;
+	char ctl_name[44];
+	struct snd_kcontrol *kctl;
+	struct snd_kcontrol_new tmp;
+
+	memset (&tmp, 0, sizeof(tmp));
+	tmp.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	tmp.private_value = id,
+	tmp.name  = ctl_name,
+
+	/* Add Mute Control */
+	sprintf(ctl_name, "%s Switch", name);
+	tmp.get  = em28xx_vol_get_mute;
+	tmp.put  = em28xx_vol_put_mute;
+	tmp.info = snd_ctl_boolean_mono_info;
+	kctl = snd_ctl_new1(&tmp, dev);
+	err = snd_ctl_add(card, kctl);
+	if (err < 0)
+		return err;
+	dprintk("Added control %s for ac97 volume control 0x%04x\n",
+		ctl_name, id);
+
+	memset (&tmp, 0, sizeof(tmp));
+	tmp.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	tmp.private_value = id,
+	tmp.name  = ctl_name,
+
+	/* Add Volume Control */
+	sprintf(ctl_name, "%s Volume", name);
+	tmp.get   = em28xx_vol_get;
+	tmp.put   = em28xx_vol_put;
+	tmp.info  = em28xx_vol_info;
+	tmp.tlv.p = em28xx_db_scale,
+	kctl = snd_ctl_new1(&tmp, dev);
+	err = snd_ctl_add(card, kctl);
+	if (err < 0)
+		return err;
+	dprintk("Added control %s for ac97 volume control 0x%04x\n",
+		ctl_name, id);
+
+	return 0;
+}
+
+/*
+ * register/unregister code and data
+ */
 static struct snd_pcm_ops snd_em28xx_pcm_capture = {
 	.open      = snd_em28xx_capture_open,
 	.close     = snd_em28xx_pcm_close,
@@ -452,17 +639,17 @@ static int em28xx_audio_init(struct em28xx *dev)
 	static int          devnr;
 	int                 err;
 
-	if (dev->has_alsa_audio != 1) {
+	if (!dev->has_alsa_audio || dev->audio_ifnum < 0) {
 		/* This device does not support the extension (in this case
 		   the device is expecting the snd-usb-audio module or
 		   doesn't have analog audio support at all) */
 		return 0;
 	}
 
-	printk(KERN_INFO "em28xx-audio.c: probing for em28x1 "
-			 "non standard usbaudio\n");
+	printk(KERN_INFO "em28xx-audio.c: probing for em28xx Audio Vendor Class\n");
 	printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus "
 			 "Rechberger\n");
+	printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab\n");
 
 	err = snd_card_create(index[devnr], "Em28xx Audio", THIS_MODULE, 0,
 			      &card);
@@ -488,6 +675,22 @@ static int em28xx_audio_init(struct em28xx *dev)
 
 	INIT_WORK(&dev->wq_trigger, audio_trigger);
 
+	if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
+		em28xx_cvol_new(card, dev, "Video", AC97_VIDEO_VOL);
+		em28xx_cvol_new(card, dev, "Line In", AC97_LINEIN_VOL);
+		em28xx_cvol_new(card, dev, "Phone", AC97_PHONE_VOL);
+		em28xx_cvol_new(card, dev, "Microphone", AC97_PHONE_VOL);
+		em28xx_cvol_new(card, dev, "CD", AC97_CD_VOL);
+		em28xx_cvol_new(card, dev, "AUX", AC97_AUX_VOL);
+		em28xx_cvol_new(card, dev, "PCM", AC97_PCM_OUT_VOL);
+
+		em28xx_cvol_new(card, dev, "Master", AC97_MASTER_VOL);
+		em28xx_cvol_new(card, dev, "Line", AC97_LINE_LEVEL_VOL);
+		em28xx_cvol_new(card, dev, "Mono", AC97_MASTER_MONO_VOL);
+		em28xx_cvol_new(card, dev, "LFE", AC97_LFE_MASTER_VOL);
+		em28xx_cvol_new(card, dev, "Surround", AC97_SURR_MASTER_VOL);
+	}
+
 	err = snd_card_register(card);
 	if (err < 0) {
 		snd_card_free(card);
@@ -538,7 +741,7 @@ static void __exit em28xx_alsa_unregister(void)
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Markus Rechberger <mrechberger@gmail.com>");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
 MODULE_DESCRIPTION("Em28xx Audio driver");
 
 module_init(em28xx_alsa_register);
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 4e37375..3e3959f 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -289,7 +289,7 @@ static struct em28xx_reg_seq leadership_reset[] = {
 	{	-1,		-1,	-1,	-1},
 };
 
-/* 2013:024f PCTV Systems nanoStick T2 290e
+/* 2013:024f PCTV nanoStick T2 290e
  * GPIO_6 - demod reset
  * GPIO_7 - LED
  */
@@ -300,6 +300,23 @@ static struct em28xx_reg_seq pctv_290e[] = {
 	{-1,			-1,	-1,		-1},
 };
 
+#if 0
+static struct em28xx_reg_seq terratec_h5_gpio[] = {
+	{EM28XX_R08_GPIO,	0xff,	0xff,	10},
+	{EM2874_R80_GPIO,	0xf6,	0xff,	100},
+	{EM2874_R80_GPIO,	0xf2,	0xff,	50},
+	{EM2874_R80_GPIO,	0xf6,	0xff,	50},
+	{ -1,			-1,	-1,	-1},
+};
+
+static struct em28xx_reg_seq terratec_h5_digital[] = {
+	{EM2874_R80_GPIO,	0xf6,	0xff,	10},
+	{EM2874_R80_GPIO,	0xe6,	0xff,	100},
+	{EM2874_R80_GPIO,	0xa6,	0xff,	10},
+	{ -1,			-1,	-1,	-1},
+};
+#endif
+
 /*
  *  Board definitions
  */
@@ -843,6 +860,19 @@ struct em28xx_board em28xx_boards[] = {
 			.gpio     = terratec_cinergy_USB_XS_FR_analog,
 		} },
 	},
+	[EM2884_BOARD_TERRATEC_H5] = {
+		.name         = "Terratec Cinergy H5",
+		.has_dvb      = 1,
+#if 0
+		.tuner_type   = TUNER_PHILIPS_TDA8290,
+		.tuner_addr   = 0x41,
+		.dvb_gpio     = terratec_h5_digital, /* FIXME: probably wrong */
+		.tuner_gpio   = terratec_h5_gpio,
+#endif
+		.i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
+				EM28XX_I2C_CLK_WAIT_ENABLE |
+				EM28XX_I2C_FREQ_400_KHZ,
+	},
 	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 		.name         = "Hauppauge WinTV HVR 900",
 		.tda9887_conf = TDA9887_PRESENT,
@@ -1259,7 +1289,7 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 
-	[EM2874_LEADERSHIP_ISDBT] = {
+	[EM2874_BOARD_LEADERSHIP_ISDBT] = {
 		.i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
 				  EM28XX_I2C_CLK_WAIT_ENABLE |
 				  EM28XX_I2C_FREQ_100_KHZ,
@@ -1319,7 +1349,6 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2880_BOARD_KWORLD_DVB_305U] = {
 		.name	      = "KWorld DVB-T 305U",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
@@ -1770,16 +1799,16 @@ struct em28xx_board em28xx_boards[] = {
 		.dvb_gpio   = kworld_a340_digital,
 		.tuner_gpio = default_tuner_gpio,
 	},
-	/* 2013:024f PCTV Systems nanoStick T2 290e.
+	/* 2013:024f PCTV nanoStick T2 290e.
 	 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
 	[EM28174_BOARD_PCTV_290E] = {
+		.name          = "PCTV nanoStick T2 290e",
 		.i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
 			EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
-		.xclk          = EM28XX_XCLK_FREQUENCY_12MHZ,
-		.name          = "PCTV Systems nanoStick T2 290e",
 		.tuner_type    = TUNER_ABSENT,
 		.tuner_gpio    = pctv_290e,
 		.has_dvb       = 1,
+		.ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
 	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
@@ -1855,8 +1884,10 @@ struct usb_device_id em28xx_id_table[] = {
 	{ USB_DEVICE(0x0ccd, 0x0042),
 			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
 	{ USB_DEVICE(0x0ccd, 0x0043),
-			.driver_info = EM2870_BOARD_TERRATEC_XS },
-	{ USB_DEVICE(0x0ccd, 0x0047),
+			.driver_info = EM2884_BOARD_TERRATEC_H5 },
+	{ USB_DEVICE(0x0ccd, 0x10a2),	/* Rev. 1 */
+			.driver_info = EM2884_BOARD_TERRATEC_H5 },
+	{ USB_DEVICE(0x0ccd, 0x10ad),	/* Rev. 2 */
 			.driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
 	{ USB_DEVICE(0x0ccd, 0x0084),
 			.driver_info = EM2860_BOARD_TERRATEC_AV350 },
@@ -1937,7 +1968,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
 	{0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
 	{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
 	{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
-	{0x6b800080, EM2874_LEADERSHIP_ISDBT, TUNER_ABSENT},
+	{0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
 };
 
 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
@@ -2660,10 +2691,9 @@ void em28xx_card_setup(struct em28xx *dev)
 			.addr = 0xba >> 1,
 			.platform_data = &pdata,
 		};
-		struct v4l2_subdev *sd;
 
 		pdata.xtal = dev->sensor_xtal;
-		sd = v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
+		v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
 				&mt9v011_info, NULL);
 	}
 
@@ -2842,11 +2872,26 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 			em28xx_info("chip ID is em2882/em2883\n");
 			dev->wait_after_write = 0;
 			break;
+		case CHIP_ID_EM2884:
+			em28xx_info("chip ID is em2884\n");
+			dev->reg_gpio_num = EM2874_R80_GPIO;
+			dev->wait_after_write = 0;
+			break;
 		default:
 			em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
 		}
 	}
 
+	if (dev->is_audio_only) {
+		errCode = em28xx_audio_setup(dev);
+		if (errCode)
+			return -ENODEV;
+		em28xx_add_into_devlist(dev);
+		em28xx_init_extension(dev);
+
+		return 0;
+	}
+
 	/* Prepopulate cached GPO register content */
 	retval = em28xx_read_reg(dev, dev->reg_gpo_num);
 	if (retval >= 0)
@@ -2947,6 +2992,9 @@ fail_reg_devices:
 	return retval;
 }
 
+/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
+#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
+
 /*
  * em28xx_usb_probe()
  * checks for supported devices
@@ -2956,15 +3004,15 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 {
 	const struct usb_endpoint_descriptor *endpoint;
 	struct usb_device *udev;
-	struct usb_interface *uif;
 	struct em28xx *dev = NULL;
 	int retval;
-	int i, nr, ifnum, isoc_pipe;
+	bool is_audio_only = false, has_audio = false;
+	int i, nr, isoc_pipe;
+	const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
 	char *speed;
 	char descr[255] = "";
 
 	udev = usb_get_dev(interface_to_usbdev(interface));
-	ifnum = interface->altsetting[0].desc.bInterfaceNumber;
 
 	/* Check to see next free device and mark as used */
 	nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
@@ -2984,6 +3032,19 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		goto err;
 	}
 
+	/* Get endpoints */
+	for (i = 0; i < interface->num_altsetting; i++) {
+		int ep;
+
+		for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
+			struct usb_host_endpoint	*e;
+			e = &interface->altsetting[i].endpoint[ep];
+
+			if (e->desc.bEndpointAddress == 0x83)
+				has_audio = true;
+		}
+	}
+
 	endpoint = &interface->cur_altsetting->endpoint[0].desc;
 
 	/* check if the device has the iso in endpoint at the correct place */
@@ -3003,19 +3064,22 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 			check_interface = 0;
 
 		if (!check_interface) {
-			em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
-				"interface %i, class %i found.\n",
-				le16_to_cpu(udev->descriptor.idVendor),
-				le16_to_cpu(udev->descriptor.idProduct),
-				ifnum,
-				interface->altsetting[0].desc.bInterfaceClass);
-
-			em28xx_err(DRIVER_NAME " This is an anciliary "
-				"interface not used by the driver\n");
-
-			em28xx_devused &= ~(1<<nr);
-			retval = -ENODEV;
-			goto err;
+			if (has_audio) {
+				is_audio_only = true;
+			} else {
+				em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
+					"interface %i, class %i found.\n",
+					le16_to_cpu(udev->descriptor.idVendor),
+					le16_to_cpu(udev->descriptor.idProduct),
+					ifnum,
+					interface->altsetting[0].desc.bInterfaceClass);
+				em28xx_err(DRIVER_NAME " This is an anciliary "
+					"interface not used by the driver\n");
+
+				em28xx_devused &= ~(1<<nr);
+				retval = -ENODEV;
+				goto err;
+			}
 		}
 	}
 
@@ -3045,8 +3109,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	if (*descr)
 		strlcat(descr, " ", sizeof(descr));
 
-	printk(DRIVER_NAME ": New device %s@ %s Mbps "
-		"(%04x:%04x, interface %d, class %d)\n",
+	printk(KERN_INFO DRIVER_NAME
+		": New device %s@ %s Mbps (%04x:%04x, interface %d, class %d)\n",
 		descr,
 		speed,
 		le16_to_cpu(udev->descriptor.idVendor),
@@ -3054,6 +3118,11 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		ifnum,
 		interface->altsetting->desc.bInterfaceNumber);
 
+	if (has_audio)
+		printk(KERN_INFO DRIVER_NAME
+		       ": Audio Vendor Class interface %i found\n",
+		       ifnum);
+
 	/*
 	 * Make sure we have 480 Mbps of bandwidth, otherwise things like
 	 * video stream wouldn't likely work, since 12 Mbps is generally
@@ -3089,10 +3158,13 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	dev->devno = nr;
 	dev->model = id->driver_info;
 	dev->alt   = -1;
+	dev->is_audio_only = is_audio_only;
+	dev->has_alsa_audio = has_audio;
+	dev->audio_ifnum = ifnum;
 
 	/* Checks if audio is provided by some interface */
 	for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
-		uif = udev->config->interface[i];
+		struct usb_interface *uif = udev->config->interface[i];
 		if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
 			dev->has_audio_class = 1;
 			break;
@@ -3100,9 +3172,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	}
 
 	/* compute alternate max packet sizes */
-	uif = udev->actconfig->interface[0];
-
-	dev->num_alt = uif->num_altsetting;
+	dev->num_alt = interface->num_altsetting;
 	dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
 
 	if (dev->alt_max_pkt_size == NULL) {
@@ -3114,14 +3184,21 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	}
 
 	for (i = 0; i < dev->num_alt ; i++) {
-		u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
-		dev->alt_max_pkt_size[i] =
-		    (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
+		u16 tmp = le16_to_cpu(interface->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
+		unsigned int size = tmp & 0x7ff;
+
+		if (udev->speed == USB_SPEED_HIGH)
+			size = size * hb_mult(tmp);
+
+		dev->alt_max_pkt_size[i] = size;
 	}
 
 	if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
 		dev->model = card[nr];
 
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
 	/* allocate device struct */
 	mutex_init(&dev->lock);
 	mutex_lock(&dev->lock);
@@ -3133,9 +3210,6 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		goto err;
 	}
 
-	/* save our data pointer in this interface device */
-	usb_set_intfdata(interface, dev);
-
 	request_modules(dev);
 
 	/* Should be the last thing to do, to avoid newer udev's to
@@ -3164,6 +3238,13 @@ static void em28xx_usb_disconnect(struct usb_interface *interface)
 	if (!dev)
 		return;
 
+	if (dev->is_audio_only) {
+		mutex_lock(&dev->lock);
+		em28xx_close_extension(dev);
+		mutex_unlock(&dev->lock);
+		return;
+	}
+
 	em28xx_info("disconnecting %s\n", dev->vdev->name);
 
 	flush_request_modules(dev);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index e33f145..57b1b5c 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -211,6 +211,7 @@ int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val)
 {
 	return em28xx_write_regs(dev, reg, &val, 1);
 }
+EXPORT_SYMBOL_GPL(em28xx_write_reg);
 
 /*
  * em28xx_write_reg_bits()
@@ -286,6 +287,7 @@ int em28xx_read_ac97(struct em28xx *dev, u8 reg)
 		return ret;
 	return le16_to_cpu(val);
 }
+EXPORT_SYMBOL_GPL(em28xx_read_ac97);
 
 /*
  * em28xx_write_ac97()
@@ -313,13 +315,14 @@ int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(em28xx_write_ac97);
 
-struct em28xx_vol_table {
+struct em28xx_vol_itable {
 	enum em28xx_amux mux;
 	u8		 reg;
 };
 
-static struct em28xx_vol_table inputs[] = {
+static struct em28xx_vol_itable inputs[] = {
 	{ EM28XX_AMUX_VIDEO, 	AC97_VIDEO_VOL   },
 	{ EM28XX_AMUX_LINE_IN,	AC97_LINEIN_VOL  },
 	{ EM28XX_AMUX_PHONE,	AC97_PHONE_VOL   },
@@ -403,7 +406,12 @@ static int em28xx_set_audio_source(struct em28xx *dev)
 	return ret;
 }
 
-static const struct em28xx_vol_table outputs[] = {
+struct em28xx_vol_otable {
+	enum em28xx_aout mux;
+	u8		 reg;
+};
+
+static const struct em28xx_vol_otable outputs[] = {
 	{ EM28XX_AOUT_MASTER, AC97_MASTER_VOL      },
 	{ EM28XX_AOUT_LINE,   AC97_LINE_LEVEL_VOL  },
 	{ EM28XX_AOUT_MONO,   AC97_MASTER_MONO_VOL },
@@ -492,17 +500,13 @@ int em28xx_audio_setup(struct em28xx *dev)
 	if (dev->chip_id == CHIP_ID_EM2870 || dev->chip_id == CHIP_ID_EM2874
 		|| dev->chip_id == CHIP_ID_EM28174) {
 		/* Digital only device - don't load any alsa module */
-		dev->audio_mode.has_audio = 0;
-		dev->has_audio_class = 0;
-		dev->has_alsa_audio = 0;
+		dev->audio_mode.has_audio = false;
+		dev->has_audio_class = false;
+		dev->has_alsa_audio = false;
 		return 0;
 	}
 
-	/* If device doesn't support Usb Audio Class, use vendor class */
-	if (!dev->has_audio_class)
-		dev->has_alsa_audio = 1;
-
-	dev->audio_mode.has_audio = 1;
+	dev->audio_mode.has_audio = true;
 
 	/* See how this device is configured */
 	cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG);
@@ -512,8 +516,8 @@ int em28xx_audio_setup(struct em28xx *dev)
 		cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */
 	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) {
 		/* The device doesn't have vendor audio at all */
-		dev->has_alsa_audio = 0;
-		dev->audio_mode.has_audio = 0;
+		dev->has_alsa_audio = false;
+		dev->audio_mode.has_audio = false;
 		return 0;
 	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
 		   EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
@@ -542,8 +546,8 @@ int em28xx_audio_setup(struct em28xx *dev)
 		 */
 		em28xx_warn("AC97 chip type couldn't be determined\n");
 		dev->audio_mode.ac97 = EM28XX_NO_AC97;
-		dev->has_alsa_audio = 0;
-		dev->audio_mode.has_audio = 0;
+		dev->has_alsa_audio = false;
+		dev->audio_mode.has_audio = false;
 		goto init_audio;
 	}
 
@@ -615,7 +619,9 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 {
 	int rc;
 
-	if (dev->chip_id == CHIP_ID_EM2874 || dev->chip_id == CHIP_ID_EM28174) {
+	if (dev->chip_id == CHIP_ID_EM2874 ||
+	    dev->chip_id == CHIP_ID_EM2884 ||
+	    dev->chip_id == CHIP_ID_EM28174) {
 		/* The Transport Stream Enable Register moved in em2874 */
 		if (!start) {
 			rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
@@ -884,6 +890,7 @@ int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio)
 	}
 	return rc;
 }
+EXPORT_SYMBOL_GPL(em28xx_gpio_set);
 
 int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode)
 {
@@ -917,7 +924,7 @@ EXPORT_SYMBOL_GPL(em28xx_set_mode);
 static void em28xx_irq_callback(struct urb *urb)
 {
 	struct em28xx *dev = urb->context;
-	int rc, i;
+	int i;
 
 	switch (urb->status) {
 	case 0:             /* success */
@@ -934,7 +941,7 @@ static void em28xx_irq_callback(struct urb *urb)
 
 	/* Copy data from URB */
 	spin_lock(&dev->slock);
-	rc = dev->isoc_ctl.isoc_copy(dev, urb);
+	dev->isoc_ctl.isoc_copy(dev, urb);
 	spin_unlock(&dev->slock);
 
 	/* Reset urb buffers */
@@ -1106,17 +1113,19 @@ EXPORT_SYMBOL_GPL(em28xx_init_isoc);
 int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev)
 {
 	unsigned int chip_cfg2;
-	unsigned int packet_size = 564;
-
-	if (dev->chip_id == CHIP_ID_EM2874) {
-		/* FIXME - for now assume 564 like it was before, but the
-		   em2874 code should be added to return the proper value... */
-		packet_size = 564;
-	} else if (dev->chip_id == CHIP_ID_EM28174) {
-		/* FIXME same as em2874. 564 was enough for 22 Mbit DVB-T
-		   but too much for 44 Mbit DVB-C. */
-		packet_size = 752;
-	} else {
+	unsigned int packet_size;
+
+	switch (dev->chip_id) {
+	case CHIP_ID_EM2710:
+	case CHIP_ID_EM2750:
+	case CHIP_ID_EM2800:
+	case CHIP_ID_EM2820:
+	case CHIP_ID_EM2840:
+	case CHIP_ID_EM2860:
+		/* No DVB support */
+		return -EINVAL;
+	case CHIP_ID_EM2870:
+	case CHIP_ID_EM2883:
 		/* TS max packet size stored in bits 1-0 of R01 */
 		chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2);
 		switch (chip_cfg2 & EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK) {
@@ -1133,9 +1142,24 @@ int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev)
 			packet_size = 752;
 			break;
 		}
+		break;
+	case CHIP_ID_EM2874:
+		/*
+		 * FIXME: for now assumes 564 like it was before, but the
+		 * em2874 code should be added to return the proper value
+		 */
+		packet_size = 564;
+		break;
+	case CHIP_ID_EM2884:
+	case CHIP_ID_EM28174:
+	default:
+		/*
+		 * FIXME: same as em2874. 564 was enough for 22 Mbit DVB-T
+		 * but not enough for 44 Mbit DVB-C.
+		 */
+		packet_size = 752;
 	}
 
-	em28xx_coredbg("dvb max packet size=%d\n", packet_size);
 	return packet_size;
 }
 EXPORT_SYMBOL_GPL(em28xx_isoc_dvb_max_packetsize);
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 7904ca4..e5916de 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -1,7 +1,7 @@
 /*
  DVB device driver for em28xx
 
- (c) 2008 Mauro Carvalho Chehab <mchehab@infradead.org>
+ (c) 2008-2011 Mauro Carvalho Chehab <mchehab@infradead.org>
 
  (c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com>
 	- Fixes for the driver to properly work with HVR-950
@@ -40,6 +40,8 @@
 #include "s921.h"
 #include "drxd.h"
 #include "cxd2820r.h"
+#include "tda18271c2dd.h"
+#include "drxk.h"
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -73,6 +75,11 @@ struct em28xx_dvb {
 	struct dmx_frontend        fe_hw;
 	struct dmx_frontend        fe_mem;
 	struct dvb_net             net;
+
+	/* Due to DRX-K - probably need changes */
+	int (*gate_ctrl)(struct dvb_frontend *, int);
+	struct semaphore      pll_mutex;
+	bool			dont_attach_fe1;
 };
 
 
@@ -160,6 +167,11 @@ static int start_streaming(struct em28xx_dvb *dvb)
 		return rc;
 
 	max_dvb_packet_size = em28xx_isoc_dvb_max_packetsize(dev);
+	if (max_dvb_packet_size < 0)
+		return max_dvb_packet_size;
+	dprintk(1, "Using %d buffers each with %d bytes\n",
+		EM28XX_DVB_NUM_BUFS,
+		max_dvb_packet_size);
 
 	return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS,
 				EM28XX_DVB_NUM_BUFS, max_dvb_packet_size,
@@ -295,6 +307,79 @@ static struct drxd_config em28xx_drxd = {
 	.disable_i2c_gate_ctrl = 1,
 };
 
+struct drxk_config terratec_h5_drxk = {
+	.adr = 0x29,
+	.single_master = 1,
+	.no_i2c_bridge = 1,
+	.microcode_name = "dvb-usb-terratec-h5-drxk.fw",
+};
+
+static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct em28xx_dvb *dvb = fe->sec_priv;
+	int status;
+
+	if (!dvb)
+		return -EINVAL;
+
+	if (enable) {
+		down(&dvb->pll_mutex);
+		status = dvb->gate_ctrl(fe, 1);
+	} else {
+		status = dvb->gate_ctrl(fe, 0);
+		up(&dvb->pll_mutex);
+	}
+	return status;
+}
+
+static void terratec_h5_init(struct em28xx *dev)
+{
+	int i;
+	struct em28xx_reg_seq terratec_h5_init[] = {
+		{EM28XX_R08_GPIO,	0xff,	0xff,	10},
+		{EM2874_R80_GPIO,	0xf6,	0xff,	100},
+		{EM2874_R80_GPIO,	0xf2,	0xff,	50},
+		{EM2874_R80_GPIO,	0xf6,	0xff,	100},
+		{ -1,                   -1,     -1,     -1},
+	};
+	struct em28xx_reg_seq terratec_h5_end[] = {
+		{EM2874_R80_GPIO,	0xe6,	0xff,	100},
+		{EM2874_R80_GPIO,	0xa6,	0xff,	50},
+		{EM2874_R80_GPIO,	0xe6,	0xff,	100},
+		{ -1,                   -1,     -1,     -1},
+	};
+	struct {
+		unsigned char r[4];
+		int len;
+	} regs[] = {
+		{{ 0x06, 0x02, 0x00, 0x31 }, 4},
+		{{ 0x01, 0x02 }, 2},
+		{{ 0x01, 0x02, 0x00, 0xc6 }, 4},
+		{{ 0x01, 0x00 }, 2},
+		{{ 0x01, 0x00, 0xff, 0xaf }, 4},
+		{{ 0x01, 0x00, 0x03, 0xa0 }, 4},
+		{{ 0x01, 0x00 }, 2},
+		{{ 0x01, 0x00, 0x73, 0xaf }, 4},
+		{{ 0x04, 0x00 }, 2},
+		{{ 0x00, 0x04 }, 2},
+		{{ 0x00, 0x04, 0x00, 0x0a }, 4},
+		{{ 0x04, 0x14 }, 2},
+		{{ 0x04, 0x14, 0x00, 0x00 }, 4},
+	};
+
+	em28xx_gpio_set(dev, terratec_h5_init);
+	em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
+	msleep(10);
+	em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45);
+	msleep(10);
+
+	dev->i2c_client.addr = 0x82 >> 1;
+
+	for (i = 0; i < ARRAY_SIZE(regs); i++)
+		i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+	em28xx_gpio_set(dev, terratec_h5_end);
+};
+
 static int mt352_terratec_xs_init(struct dvb_frontend *fe)
 {
 	/* Values extracted from a USB trace of the Terratec Windows driver */
@@ -516,7 +601,7 @@ static void unregister_dvb(struct em28xx_dvb *dvb)
 	if (dvb->fe[1])
 		dvb_unregister_frontend(dvb->fe[1]);
 	dvb_unregister_frontend(dvb->fe[0]);
-	if (dvb->fe[1])
+	if (dvb->fe[1] && !dvb->dont_attach_fe1)
 		dvb_frontend_detach(dvb->fe[1]);
 	dvb_frontend_detach(dvb->fe[0]);
 	dvb_unregister_adapter(&dvb->adapter);
@@ -546,7 +631,7 @@ static int dvb_init(struct em28xx *dev)
 	em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
 	/* init frontend */
 	switch (dev->model) {
-	case EM2874_LEADERSHIP_ISDBT:
+	case EM2874_BOARD_LEADERSHIP_ISDBT:
 		dvb->fe[0] = dvb_attach(s921_attach,
 				&sharp_isdbt, &dev->i2c_adap);
 
@@ -689,6 +774,41 @@ static int dvb_init(struct em28xx *dev)
 			}
 		}
 		break;
+	case EM2884_BOARD_TERRATEC_H5:
+		terratec_h5_init(dev);
+
+		dvb->dont_attach_fe1 = 1;
+
+		dvb->fe[0] = dvb_attach(drxk_attach, &terratec_h5_drxk, &dev->i2c_adap, &dvb->fe[1]);
+		if (!dvb->fe[0]) {
+			result = -EINVAL;
+			goto out_free;
+		}
+
+		/* FIXME: do we need a pll semaphore? */
+		dvb->fe[0]->sec_priv = dvb;
+		sema_init(&dvb->pll_mutex, 1);
+		dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl;
+		dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+		dvb->fe[1]->id = 1;
+
+		/* Attach tda18271 to DVB-C frontend */
+		if (dvb->fe[0]->ops.i2c_gate_ctrl)
+			dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
+		if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], &dev->i2c_adap, 0x60)) {
+			result = -EINVAL;
+			goto out_free;
+		}
+		if (dvb->fe[0]->ops.i2c_gate_ctrl)
+			dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0);
+
+		/* Hack - needed by drxk/tda18271c2dd */
+		dvb->fe[1]->tuner_priv = dvb->fe[0]->tuner_priv;
+		memcpy(&dvb->fe[1]->ops.tuner_ops,
+		       &dvb->fe[0]->ops.tuner_ops,
+		       sizeof(dvb->fe[0]->ops.tuner_ops));
+
+		break;
 	default:
 		em28xx_errdev("/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n");
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 4739fc7..36f5a9b 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -181,16 +181,25 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, unsigned char addr,
 
 /*
  * em28xx_i2c_send_bytes()
- * untested for more than 4 bytes
  */
 static int em28xx_i2c_send_bytes(void *data, unsigned char addr, char *buf,
 				 short len, int stop)
 {
 	int wrcount = 0;
 	struct em28xx *dev = (struct em28xx *)data;
+	int write_timeout, ret;
 
 	wrcount = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
 
+	/* Seems to be required after a write */
+	for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
+	     write_timeout -= 5) {
+		ret = dev->em28xx_read_reg(dev, 0x05);
+		if (!ret)
+			break;
+		msleep(5);
+	}
+
 	return wrcount;
 }
 
@@ -218,9 +227,7 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, unsigned char addr,
  */
 static int em28xx_i2c_check_for_device(struct em28xx *dev, unsigned char addr)
 {
-	char msg;
 	int ret;
-	msg = addr;
 
 	ret = dev->em28xx_read_reg_req(dev, 2, addr);
 	if (ret < 0) {
@@ -332,7 +339,9 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
 	struct em28xx_eeprom *em_eeprom = (void *)eedata;
 	int i, err, size = len, block;
 
-	if (dev->chip_id == CHIP_ID_EM2874 || dev->chip_id == CHIP_ID_EM28174) {
+	if (dev->chip_id == CHIP_ID_EM2874 ||
+	    dev->chip_id == CHIP_ID_EM28174 ||
+	    dev->chip_id == CHIP_ID_EM2884) {
 		/* Empia switched to a 16-bit addressable eeprom in newer
 		   devices.  While we could certainly write a routine to read
 		   the eeprom, there is nothing of use in there that cannot be
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index ba1ba86..5d12b14 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -372,6 +372,7 @@ int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type)
 		ir->get_key = default_polling_getkey;
 		break;
 	case CHIP_ID_EM2874:
+	case CHIP_ID_EM28174:
 		ir->get_key = em2874_polling_getkey;
 		em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1);
 		break;
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index e92a28e..66f7923 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -201,6 +201,7 @@ enum em28xx_chip_id {
 	CHIP_ID_EM2870 = 35,
 	CHIP_ID_EM2883 = 36,
 	CHIP_ID_EM2874 = 65,
+	CHIP_ID_EM2884 = 68,
 	CHIP_ID_EM28174 = 113,
 };
 
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 7b6461d..d176dc0 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -32,7 +32,6 @@
 #include <linux/bitmap.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
@@ -50,7 +49,8 @@
 		      "Sascha Sommer <saschasommer@freenet.de>"
 
 #define DRIVER_DESC         "Empia em28xx based USB video device driver"
-#define EM28XX_VERSION_CODE  KERNEL_VERSION(0, 1, 2)
+
+#define EM28XX_VERSION "0.1.3"
 
 #define em28xx_videodbg(fmt, arg...) do {\
 	if (video_debug) \
@@ -72,6 +72,7 @@ do {\
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(EM28XX_VERSION);
 
 static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
 static unsigned int vbi_nr[]   = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
@@ -1757,8 +1758,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, em28xx_boards[dev->model].name, sizeof(cap->card));
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
 
-	cap->version = EM28XX_VERSION_CODE;
-
 	cap->capabilities =
 			V4L2_CAP_SLICED_VBI_CAPTURE |
 			V4L2_CAP_VIDEO_CAPTURE |
@@ -1976,7 +1975,6 @@ static int radio_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, em28xx_boards[dev->model].name, sizeof(cap->card));
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
 
-	cap->version = EM28XX_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
@@ -2450,10 +2448,8 @@ int em28xx_register_analog_devices(struct em28xx *dev)
       u8 val;
 	int ret;
 
-	printk(KERN_INFO "%s: v4l2 driver version %d.%d.%d\n",
-		dev->name,
-		(EM28XX_VERSION_CODE >> 16) & 0xff,
-		(EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff);
+	printk(KERN_INFO "%s: v4l2 driver version %s\n",
+		dev->name, EM28XX_VERSION);
 
 	/* set default norm */
 	dev->norm = em28xx_video_template.current_norm;
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 3cca331..d80658b 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -117,9 +117,9 @@
 #define EM2800_BOARD_VC211A			  74
 #define EM2882_BOARD_DIKOM_DK300		  75
 #define EM2870_BOARD_KWORLD_A340		  76
-#define EM2874_LEADERSHIP_ISDBT			  77
+#define EM2874_BOARD_LEADERSHIP_ISDBT		  77
 #define EM28174_BOARD_PCTV_290E                   78
-
+#define EM2884_BOARD_TERRATEC_H5		  79
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
@@ -487,6 +487,8 @@ struct em28xx {
 	int devno;		/* marks the number of this device */
 	enum em28xx_chip_id chip_id;
 
+	int audio_ifnum;
+
 	struct v4l2_device v4l2_dev;
 	struct em28xx_board board;
 
@@ -503,6 +505,7 @@ struct em28xx {
 
 	unsigned int has_audio_class:1;
 	unsigned int has_alsa_audio:1;
+	unsigned int is_audio_only:1;
 
 	/* Controls audio streaming */
 	struct work_struct wq_trigger;              /* Trigger to start/stop audio for alsa module */
@@ -697,6 +700,9 @@ int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
 void em28xx_release_resources(struct em28xx *dev);
 
 /* Provided by em28xx-input.c */
+
+#ifdef CONFIG_VIDEO_EM28XX_RC
+
 int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
 int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
 int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
@@ -709,6 +715,20 @@ void em28xx_deregister_snapshot_button(struct em28xx *dev);
 int em28xx_ir_init(struct em28xx *dev);
 int em28xx_ir_fini(struct em28xx *dev);
 
+#else
+
+#define em28xx_get_key_terratec			NULL
+#define em28xx_get_key_em_haup			NULL
+#define em28xx_get_key_pinnacle_usb_grey	NULL
+#define em28xx_get_key_winfast_usbii_deluxe	NULL
+
+static inline void em28xx_register_snapshot_button(struct em28xx *dev) {}
+static inline void em28xx_deregister_snapshot_button(struct em28xx *dev) {}
+static inline int em28xx_ir_init(struct em28xx *dev) { return 0; }
+static inline int em28xx_ir_fini(struct em28xx *dev) { return 0; }
+
+#endif
+
 /* Provided by em28xx-vbi.c */
 extern struct videobuf_queue_ops em28xx_vbi_qops;
 
diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h
index bf66189..14bb907 100644
--- a/drivers/media/video/et61x251/et61x251.h
+++ b/drivers/media/video/et61x251/et61x251.h
@@ -21,7 +21,6 @@
 #ifndef _ET61X251_H_
 #define _ET61X251_H_
 
-#include <linux/version.h>
 #include <linux/usb.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index a982750..9a1e80a 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
  ***************************************************************************/
 
+#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -48,8 +49,7 @@
 #define ET61X251_MODULE_AUTHOR  "(C) 2006-2007 Luca Risolia"
 #define ET61X251_AUTHOR_EMAIL   "<luca.risolia@studio.unibo.it>"
 #define ET61X251_MODULE_LICENSE "GPL"
-#define ET61X251_MODULE_VERSION "1:1.09"
-#define ET61X251_MODULE_VERSION_CODE  KERNEL_VERSION(1, 1, 9)
+#define ET61X251_MODULE_VERSION "1.1.10"
 
 /*****************************************************************************/
 
@@ -1579,7 +1579,7 @@ et61x251_vidioc_querycap(struct et61x251_device* cam, void __user * arg)
 {
 	struct v4l2_capability cap = {
 		.driver = "et61x251",
-		.version = ET61X251_MODULE_VERSION_CODE,
+		.version = LINUX_VERSION_CODE,
 		.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
 				V4L2_CAP_STREAMING,
 	};
@@ -2480,16 +2480,8 @@ static long et61x251_ioctl_v4l2(struct file *filp,
 	case VIDIOC_S_PARM:
 		return et61x251_vidioc_s_parm(cam, arg);
 
-	case VIDIOC_G_STD:
-	case VIDIOC_S_STD:
-	case VIDIOC_QUERYSTD:
-	case VIDIOC_ENUMSTD:
-	case VIDIOC_QUERYMENU:
-	case VIDIOC_ENUM_FRAMEINTERVALS:
-		return -EINVAL;
-
 	default:
-		return -EINVAL;
+		return -ENOTTY;
 
 	}
 }
diff --git a/drivers/media/video/fsl-viu.c b/drivers/media/video/fsl-viu.c
index 908d701..27cb197 100644
--- a/drivers/media/video/fsl-viu.c
+++ b/drivers/media/video/fsl-viu.c
@@ -23,19 +23,13 @@
 #include <linux/io.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf-dma-contig.h>
 
 #define DRV_NAME		"fsl_viu"
-#define VIU_MAJOR_VERSION	0
-#define VIU_MINOR_VERSION	5
-#define VIU_RELEASE		0
-#define VIU_VERSION		KERNEL_VERSION(VIU_MAJOR_VERSION, \
-					       VIU_MINOR_VERSION, \
-					       VIU_RELEASE)
+#define VIU_VERSION		"0.5.1"
 
 #define BUFFER_TIMEOUT		msecs_to_jiffies(500)  /* 0.5 seconds */
 
@@ -610,7 +604,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 {
 	strcpy(cap->driver, "viu");
 	strcpy(cap->card, "viu");
-	cap->version = VIU_VERSION;
 	cap->capabilities =	V4L2_CAP_VIDEO_CAPTURE |
 				V4L2_CAP_STREAMING     |
 				V4L2_CAP_VIDEO_OVERLAY |
@@ -1684,3 +1677,4 @@ module_exit(viu_exit);
 MODULE_DESCRIPTION("Freescale Video-In(VIU)");
 MODULE_AUTHOR("Hongjun Chen");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(VIU_VERSION);
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 34ae2c2..43d9a20 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -179,6 +179,16 @@ config USB_GSPCA_PAC7311
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_pac7311.
 
+config USB_GSPCA_SE401
+	tristate "SE401 USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	 Say Y here if you want support for cameras based on the
+	 Endpoints (formerly known as AOX) se401 chip.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called gspca_se401.
+
 config USB_GSPCA_SN9C2028
 	tristate "SONIX Dual-Mode USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index 802fbe1..d6364a8 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_GSPCA_OV534_9)  += gspca_ov534_9.o
 obj-$(CONFIG_USB_GSPCA_PAC207)   += gspca_pac207.o
 obj-$(CONFIG_USB_GSPCA_PAC7302)  += gspca_pac7302.o
 obj-$(CONFIG_USB_GSPCA_PAC7311)  += gspca_pac7311.o
+obj-$(CONFIG_USB_GSPCA_SE401)    += gspca_se401.o
 obj-$(CONFIG_USB_GSPCA_SN9C2028) += gspca_sn9c2028.o
 obj-$(CONFIG_USB_GSPCA_SN9C20X)  += gspca_sn9c20x.o
 obj-$(CONFIG_USB_GSPCA_SONIXB)   += gspca_sonixb.o
@@ -58,6 +59,7 @@ gspca_ov534_9-objs  := ov534_9.o
 gspca_pac207-objs   := pac207.o
 gspca_pac7302-objs  := pac7302.o
 gspca_pac7311-objs  := pac7311.o
+gspca_se401-objs    := se401.o
 gspca_sn9c2028-objs := sn9c2028.o
 gspca_sn9c20x-objs  := sn9c20x.o
 gspca_sonixb-objs   := sonixb.o
diff --git a/drivers/media/video/gspca/gl860/gl860.h b/drivers/media/video/gspca/gl860/gl860.h
index 49ad4ac..0330a02 100644
--- a/drivers/media/video/gspca/gl860/gl860.h
+++ b/drivers/media/video/gspca/gl860/gl860.h
@@ -18,7 +18,6 @@
  */
 #ifndef GL860_DEV_H
 #define GL860_DEV_H
-#include <linux/version.h>
 
 #include "gspca.h"
 
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 08ce994..5da4879 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -24,7 +24,6 @@
 #define MODULE_NAME "gspca"
 
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/fs.h>
 #include <linux/vmalloc.h>
 #include <linux/sched.h>
@@ -51,11 +50,12 @@
 #error "DEF_NURBS too big"
 #endif
 
+#define DRIVER_VERSION_NUMBER	"2.13.0"
+
 MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("GSPCA USB Camera Driver");
 MODULE_LICENSE("GPL");
-
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 13, 0)
+MODULE_VERSION(DRIVER_VERSION_NUMBER);
 
 #ifdef GSPCA_DEBUG
 int gspca_debug = D_ERR | D_PROBE;
@@ -443,8 +443,11 @@ void gspca_frame_add(struct gspca_dev *gspca_dev,
 	} else {
 		switch (gspca_dev->last_packet_type) {
 		case DISCARD_PACKET:
-			if (packet_type == LAST_PACKET)
+			if (packet_type == LAST_PACKET) {
 				gspca_dev->last_packet_type = packet_type;
+				gspca_dev->image = NULL;
+				gspca_dev->image_len = 0;
+			}
 			return;
 		case LAST_PACKET:
 			return;
@@ -1278,10 +1281,10 @@ static int vidioc_querycap(struct file *file, void  *priv,
 		ret = -ENODEV;
 		goto out;
 	}
-	strncpy((char *) cap->driver, gspca_dev->sd_desc->name,
+	strlcpy((char *) cap->driver, gspca_dev->sd_desc->name,
 			sizeof cap->driver);
 	if (gspca_dev->dev->product != NULL) {
-		strncpy((char *) cap->card, gspca_dev->dev->product,
+		strlcpy((char *) cap->card, gspca_dev->dev->product,
 			sizeof cap->card);
 	} else {
 		snprintf((char *) cap->card, sizeof cap->card,
@@ -1291,7 +1294,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	}
 	usb_make_path(gspca_dev->dev, (char *) cap->bus_info,
 			sizeof(cap->bus_info));
-	cap->version = DRIVER_VERSION_NUMBER;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
 			  | V4L2_CAP_STREAMING
 			  | V4L2_CAP_READWRITE;
@@ -1460,7 +1462,7 @@ static int vidioc_enum_input(struct file *file, void *priv,
 		return -EINVAL;
 	input->type = V4L2_INPUT_TYPE_CAMERA;
 	input->status = gspca_dev->cam.input_flags;
-	strncpy(input->name, gspca_dev->sd_desc->name,
+	strlcpy(input->name, gspca_dev->sd_desc->name,
 		sizeof input->name);
 	return 0;
 }
@@ -2478,10 +2480,7 @@ EXPORT_SYMBOL(gspca_auto_gain_n_exposure);
 /* -- module insert / remove -- */
 static int __init gspca_init(void)
 {
-	info("v%d.%d.%d registered",
-		(DRIVER_VERSION_NUMBER >> 16) & 0xff,
-		(DRIVER_VERSION_NUMBER >> 8) & 0xff,
-		DRIVER_VERSION_NUMBER & 0xff);
+	info("v" DRIVER_VERSION_NUMBER " registered");
 	return 0;
 }
 static void __exit gspca_exit(void)
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 057e287..0800433 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -134,6 +134,7 @@ enum sensors {
 	SEN_OV7670,
 	SEN_OV76BE,
 	SEN_OV8610,
+	SEN_OV9600,
 };
 
 /* Note this is a bit of a hack, but the w9968cf driver needs the code for all
@@ -340,6 +341,10 @@ static const unsigned ctrl_dis[] = {
 			(1 << EXPOSURE) |
 			(1 << AUTOGAIN) |
 			(1 << FREQ),
+[SEN_OV9600] =		((1 << NCTRL) - 1)	/* no control */
+			^ ((1 << EXPOSURE)	/* but exposure */
+			 | (1 << AUTOGAIN)),	/* and autogain */
+
 };
 
 static const struct v4l2_pix_format ov519_vga_mode[] = {
@@ -525,6 +530,17 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
 };
+static const struct v4l2_pix_format ovfx2_ov9600_mode[] = {
+	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1},
+	{1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 1280,
+		.sizeimage = 1280 * 1024,
+		.colorspace = V4L2_COLORSPACE_SRGB},
+};
 
 /* Registers common to OV511 / OV518 */
 #define R51x_FIFO_PSIZE			0x30	/* 2 bytes wide w/ OV518(+) */
@@ -1807,6 +1823,22 @@ static const struct ov_i2c_regvals norm_7660[] = {
 			| OV7670_COM8_AEC},
 	{0xa1, 0xc8}
 };
+static const struct ov_i2c_regvals norm_9600[] = {
+	{0x12, 0x80},
+	{0x0c, 0x28},
+	{0x11, 0x80},
+	{0x13, 0xb5},
+	{0x14, 0x3e},
+	{0x1b, 0x04},
+	{0x24, 0xb0},
+	{0x25, 0x90},
+	{0x26, 0x94},
+	{0x35, 0x90},
+	{0x37, 0x07},
+	{0x38, 0x08},
+	{0x01, 0x8e},
+	{0x02, 0x85}
+};
 
 /* 7670. Defaults taken from OmniVision provided data,
 *  as provided by Jonathan Corbet of OLPC		*/
@@ -2400,9 +2432,12 @@ static int ov518_i2c_r(struct sd *sd, u8 reg)
 
 	/* Initiate 2-byte write cycle */
 	reg_w(sd, R518_I2C_CTL, 0x03);
+	reg_r8(sd, R518_I2C_CTL);
 
 	/* Initiate 2-byte read cycle */
 	reg_w(sd, R518_I2C_CTL, 0x05);
+	reg_r8(sd, R518_I2C_CTL);
+
 	value = reg_r(sd, R51x_I2C_DATA);
 	PDEBUG(D_USBI, "ov518_i2c_r %02x %02x", reg, value);
 	return value;
@@ -2686,7 +2721,7 @@ static void write_i2c_regvals(struct sd *sd,
  *
  ***************************************************************************/
 
-/* This initializes the OV2x10 / OV3610 / OV3620 */
+/* This initializes the OV2x10 / OV3610 / OV3620 / OV9600 */
 static void ov_hires_configure(struct sd *sd)
 {
 	int high, low;
@@ -2702,19 +2737,32 @@ static void ov_hires_configure(struct sd *sd)
 	high = i2c_r(sd, 0x0a);
 	low = i2c_r(sd, 0x0b);
 	/* info("%x, %x", high, low); */
-	if (high == 0x96 && low == 0x40) {
-		PDEBUG(D_PROBE, "Sensor is an OV2610");
-		sd->sensor = SEN_OV2610;
-	} else if (high == 0x96 && low == 0x41) {
-		PDEBUG(D_PROBE, "Sensor is an OV2610AE");
-		sd->sensor = SEN_OV2610AE;
-	} else if (high == 0x36 && (low & 0x0f) == 0x00) {
-		PDEBUG(D_PROBE, "Sensor is an OV3610");
-		sd->sensor = SEN_OV3610;
-	} else {
-		err("Error unknown sensor type: %02x%02x",
-			high, low);
+	switch (high) {
+	case 0x96:
+		switch (low) {
+		case 0x40:
+			PDEBUG(D_PROBE, "Sensor is a OV2610");
+			sd->sensor = SEN_OV2610;
+			return;
+		case 0x41:
+			PDEBUG(D_PROBE, "Sensor is a OV2610AE");
+			sd->sensor = SEN_OV2610AE;
+			return;
+		case 0xb1:
+			PDEBUG(D_PROBE, "Sensor is a OV9600");
+			sd->sensor = SEN_OV9600;
+			return;
+		}
+		break;
+	case 0x36:
+		if ((low & 0x0f) == 0x00) {
+			PDEBUG(D_PROBE, "Sensor is a OV3610");
+			sd->sensor = SEN_OV3610;
+			return;
+		}
+		break;
 	}
+	err("Error unknown sensor type: %02x%02x", high, low);
 }
 
 /* This initializes the OV8110, OV8610 sensor. The OV8110 uses
@@ -3400,6 +3448,10 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			cam->cam_mode = ovfx2_ov3610_mode;
 			cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode);
 			break;
+		case SEN_OV9600:
+			cam->cam_mode = ovfx2_ov9600_mode;
+			cam->nmodes = ARRAY_SIZE(ovfx2_ov9600_mode);
+			break;
 		default:
 			if (sd->sif) {
 				cam->cam_mode = ov519_sif_mode;
@@ -3497,6 +3549,12 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	case SEN_OV8610:
 		write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610));
 		break;
+	case SEN_OV9600:
+		write_i2c_regvals(sd, norm_9600, ARRAY_SIZE(norm_9600));
+
+		/* enable autoexpo */
+/*		i2c_w_mask(sd, 0x13, 0x05, 0x05); */
+		break;
 	}
 	return gspca_dev->usb_err;
 error:
@@ -4085,6 +4143,33 @@ static void mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
 		break;
+	case SEN_OV9600: {
+		const struct ov_i2c_regvals *vals;
+		static const struct ov_i2c_regvals sxga_15[] = {
+			{0x11, 0x80}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75}
+		};
+		static const struct ov_i2c_regvals sxga_7_5[] = {
+			{0x11, 0x81}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75}
+		};
+		static const struct ov_i2c_regvals vga_30[] = {
+			{0x11, 0x81}, {0x14, 0x7e}, {0x24, 0x70}, {0x25, 0x60}
+		};
+		static const struct ov_i2c_regvals vga_15[] = {
+			{0x11, 0x83}, {0x14, 0x3e}, {0x24, 0x80}, {0x25, 0x70}
+		};
+
+		/* frame rates:
+		 *	15fps / 7.5 fps for 1280x1024
+		 *	30fps / 15fps for 640x480
+		 */
+		i2c_w_mask(sd, 0x12, qvga ? 0x40 : 0x00, 0x40);
+		if (qvga)
+			vals = sd->frame_rate < 30 ? vga_15 : vga_30;
+		else
+			vals = sd->frame_rate < 15 ? sxga_7_5 : sxga_15;
+		write_i2c_regvals(sd, vals, ARRAY_SIZE(sxga_15));
+		return;
+	    }
 	default:
 		return;
 	}
@@ -4120,6 +4205,7 @@ static void set_ov_sensor_window(struct sd *sd)
 	case SEN_OV2610AE:
 	case SEN_OV3610:
 	case SEN_OV7670:
+	case SEN_OV9600:
 		mode_init_ov_sensor_regs(sd);
 		return;
 	case SEN_OV7660:
@@ -4920,7 +5006,8 @@ static const struct sd_desc sd_desc = {
 static const struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF },
 	{USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 },
-	{USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x405f),
+		.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
 	{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4064),
diff --git a/drivers/media/video/gspca/se401.c b/drivers/media/video/gspca/se401.c
new file mode 100644
index 0000000..4c283c2
--- /dev/null
+++ b/drivers/media/video/gspca/se401.c
@@ -0,0 +1,774 @@
+/*
+ * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver
+ *
+ * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on the v4l1 se401 driver which is:
+ *
+ * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define MODULE_NAME "se401"
+
+#define BULK_SIZE 4096
+#define PACKET_SIZE 1024
+#define READ_REQ_SIZE 64
+#define MAX_MODES ((READ_REQ_SIZE - 6) / 4)
+/* The se401 compression algorithm uses a fixed quant factor, which
+   can be configured by setting the high nibble of the SE401_OPERATINGMODE
+   feature. This needs to exactly match what is in libv4l! */
+#define SE401_QUANT_FACT 8
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "gspca.h"
+#include "se401.h"
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Endpoints se401");
+MODULE_LICENSE("GPL");
+
+/* controls */
+enum e_ctrl {
+	BRIGHTNESS,
+	GAIN,
+	EXPOSURE,
+	FREQ,
+	NCTRL	/* number of controls */
+};
+
+/* exposure change state machine states */
+enum {
+	EXPO_CHANGED,
+	EXPO_DROP_FRAME,
+	EXPO_NO_CHANGE,
+};
+
+/* specific webcam descriptor */
+struct sd {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+	struct gspca_ctrl ctrls[NCTRL];
+	struct v4l2_pix_format fmts[MAX_MODES];
+	int pixels_read;
+	int packet_read;
+	u8 packet[PACKET_SIZE];
+	u8 restart_stream;
+	u8 button_state;
+	u8 resetlevel;
+	u8 resetlevel_frame_count;
+	int resetlevel_adjust_dir;
+	int expo_change_state;
+};
+
+static void setbrightness(struct gspca_dev *gspca_dev);
+static void setgain(struct gspca_dev *gspca_dev);
+static void setexposure(struct gspca_dev *gspca_dev);
+
+static const struct ctrl sd_ctrls[NCTRL] = {
+[BRIGHTNESS] = {
+		{
+			.id      = V4L2_CID_BRIGHTNESS,
+			.type    = V4L2_CTRL_TYPE_INTEGER,
+			.name    = "Brightness",
+			.minimum = 0,
+			.maximum = 255,
+			.step    = 1,
+			.default_value = 15,
+		},
+		.set_control = setbrightness
+	},
+[GAIN] = {
+		{
+			.id      = V4L2_CID_GAIN,
+			.type    = V4L2_CTRL_TYPE_INTEGER,
+			.name    = "Gain",
+			.minimum = 0,
+			.maximum = 50, /* Really 63 but > 50 is not pretty */
+			.step    = 1,
+			.default_value = 25,
+		},
+		.set_control = setgain
+	},
+[EXPOSURE] = {
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "Exposure",
+			.minimum = 0,
+			.maximum = 32767,
+			.step = 1,
+			.default_value = 15000,
+		},
+		.set_control = setexposure
+	},
+[FREQ] = {
+		{
+			.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
+			.type    = V4L2_CTRL_TYPE_MENU,
+			.name    = "Light frequency filter",
+			.minimum = 0,
+			.maximum = 2,
+			.step    = 1,
+			.default_value = 0,
+		},
+		.set_control = setexposure
+	},
+};
+
+static void se401_write_req(struct gspca_dev *gspca_dev, u16 req, u16 value,
+			    int silent)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_sndctrlpipe(gspca_dev->dev, 0), req,
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      value, 0, NULL, 0, 1000);
+	if (err < 0) {
+		if (!silent)
+			err("write req failed req %#04x val %#04x error %d",
+			    req, value, err);
+		gspca_dev->usb_err = err;
+	}
+}
+
+static void se401_read_req(struct gspca_dev *gspca_dev, u16 req, int silent)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+
+	if (USB_BUF_SZ < READ_REQ_SIZE) {
+		err("USB_BUF_SZ too small!!");
+		gspca_dev->usb_err = -ENOBUFS;
+		return;
+	}
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_rcvctrlpipe(gspca_dev->dev, 0), req,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, 0, gspca_dev->usb_buf, READ_REQ_SIZE, 1000);
+	if (err < 0) {
+		if (!silent)
+			err("read req failed req %#04x error %d", req, err);
+		gspca_dev->usb_err = err;
+	}
+}
+
+static void se401_set_feature(struct gspca_dev *gspca_dev,
+			      u16 selector, u16 param)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_sndctrlpipe(gspca_dev->dev, 0),
+			      SE401_REQ_SET_EXT_FEATURE,
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      param, selector, NULL, 0, 1000);
+	if (err < 0) {
+		err("set feature failed sel %#04x param %#04x error %d",
+		    selector, param, err);
+		gspca_dev->usb_err = err;
+	}
+}
+
+static int se401_get_feature(struct gspca_dev *gspca_dev, u16 selector)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return gspca_dev->usb_err;
+
+	if (USB_BUF_SZ < 2) {
+		err("USB_BUF_SZ too small!!");
+		gspca_dev->usb_err = -ENOBUFS;
+		return gspca_dev->usb_err;
+	}
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_rcvctrlpipe(gspca_dev->dev, 0),
+			      SE401_REQ_GET_EXT_FEATURE,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, selector, gspca_dev->usb_buf, 2, 1000);
+	if (err < 0) {
+		err("get feature failed sel %#04x error %d", selector, err);
+		gspca_dev->usb_err = err;
+		return err;
+	}
+	return gspca_dev->usb_buf[0] | (gspca_dev->usb_buf[1] << 8);
+}
+
+static void setbrightness(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (gspca_dev->ctrl_dis & (1 << BRIGHTNESS))
+		return;
+
+	/* HDG: this does not seem to do anything on my cam */
+	se401_write_req(gspca_dev, SE401_REQ_SET_BRT,
+			sd->ctrls[BRIGHTNESS].val, 0);
+}
+
+static void setgain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u16 gain = 63 - sd->ctrls[GAIN].val;
+
+	/* red color gain */
+	se401_set_feature(gspca_dev, HV7131_REG_ARCG, gain);
+	/* green color gain */
+	se401_set_feature(gspca_dev, HV7131_REG_AGCG, gain);
+	/* blue color gain */
+	se401_set_feature(gspca_dev, HV7131_REG_ABCG, gain);
+}
+
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int integration = sd->ctrls[EXPOSURE].val << 6;
+	u8 expose_h, expose_m, expose_l;
+
+	/* Do this before the set_feature calls, for proper timing wrt
+	   the interrupt driven pkt_scan. Note we may still race but that
+	   is not a big issue, the expo change state machine is merely for
+	   avoiding underexposed frames getting send out, if one sneaks
+	   through so be it */
+	sd->expo_change_state = EXPO_CHANGED;
+
+	if (sd->ctrls[FREQ].val == V4L2_CID_POWER_LINE_FREQUENCY_50HZ)
+		integration = integration - integration % 106667;
+	if (sd->ctrls[FREQ].val == V4L2_CID_POWER_LINE_FREQUENCY_60HZ)
+		integration = integration - integration % 88889;
+
+	expose_h = (integration >> 16);
+	expose_m = (integration >> 8);
+	expose_l = integration;
+
+	/* integration time low */
+	se401_set_feature(gspca_dev, HV7131_REG_TITL, expose_l);
+	/* integration time mid */
+	se401_set_feature(gspca_dev, HV7131_REG_TITM, expose_m);
+	/* integration time high */
+	se401_set_feature(gspca_dev, HV7131_REG_TITU, expose_h);
+}
+
+static int sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
+	u8 *cd = gspca_dev->usb_buf;
+	int i, j, n;
+	int widths[MAX_MODES], heights[MAX_MODES];
+
+	/* Read the camera descriptor */
+	se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 1);
+	if (gspca_dev->usb_err) {
+		/* Sometimes after being idle for a while the se401 won't
+		   respond and needs a good kicking  */
+		usb_reset_device(gspca_dev->dev);
+		gspca_dev->usb_err = 0;
+		se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0);
+	}
+
+	/* Some cameras start with their LED on */
+	se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0);
+	if (gspca_dev->usb_err)
+		return gspca_dev->usb_err;
+
+	if (cd[1] != 0x41) {
+		err("Wrong descriptor type");
+		return -ENODEV;
+	}
+
+	if (!(cd[2] & SE401_FORMAT_BAYER)) {
+		err("Bayer format not supported!");
+		return -ENODEV;
+	}
+
+	if (cd[3])
+		info("ExtraFeatures: %d", cd[3]);
+
+	n = cd[4] | (cd[5] << 8);
+	if (n > MAX_MODES) {
+		err("Too many frame sizes");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < n ; i++) {
+		widths[i] = cd[6 + i * 4 + 0] | (cd[6 + i * 4 + 1] << 8);
+		heights[i] = cd[6 + i * 4 + 2] | (cd[6 + i * 4 + 3] << 8);
+	}
+
+	for (i = 0; i < n ; i++) {
+		sd->fmts[i].width = widths[i];
+		sd->fmts[i].height = heights[i];
+		sd->fmts[i].field = V4L2_FIELD_NONE;
+		sd->fmts[i].colorspace = V4L2_COLORSPACE_SRGB;
+		sd->fmts[i].priv = 1;
+
+		/* janggu compression only works for 1/4th or 1/16th res */
+		for (j = 0; j < n; j++) {
+			if (widths[j] / 2 == widths[i] &&
+			    heights[j] / 2 == heights[i]) {
+				sd->fmts[i].priv = 2;
+				break;
+			}
+		}
+		/* 1/16th if available too is better then 1/4th, because
+		   we then use a larger area of the sensor */
+		for (j = 0; j < n; j++) {
+			if (widths[j] / 4 == widths[i] &&
+			    heights[j] / 4 == heights[i]) {
+				sd->fmts[i].priv = 4;
+				break;
+			}
+		}
+
+		if (sd->fmts[i].priv == 1) {
+			/* Not a 1/4th or 1/16th res, use bayer */
+			sd->fmts[i].pixelformat = V4L2_PIX_FMT_SBGGR8;
+			sd->fmts[i].bytesperline = widths[i];
+			sd->fmts[i].sizeimage = widths[i] * heights[i];
+			info("Frame size: %dx%d bayer", widths[i], heights[i]);
+		} else {
+			/* Found a match use janggu compression */
+			sd->fmts[i].pixelformat = V4L2_PIX_FMT_SE401;
+			sd->fmts[i].bytesperline = 0;
+			sd->fmts[i].sizeimage = widths[i] * heights[i] * 3;
+			info("Frame size: %dx%d 1/%dth janggu",
+			     widths[i], heights[i],
+			     sd->fmts[i].priv * sd->fmts[i].priv);
+		}
+	}
+
+	cam->cam_mode = sd->fmts;
+	cam->nmodes = n;
+	cam->bulk = 1;
+	cam->bulk_size = BULK_SIZE;
+	cam->bulk_nurbs = 4;
+	cam->ctrls = sd->ctrls;
+	gspca_dev->nbalt = 1;  /* Ignore the bogus isoc alt settings */
+	sd->resetlevel = 0x2d; /* Set initial resetlevel */
+
+	/* See if the camera supports brightness */
+	se401_read_req(gspca_dev, SE401_REQ_GET_BRT, 1);
+	if (gspca_dev->usb_err) {
+		gspca_dev->ctrl_dis = (1 << BRIGHTNESS);
+		gspca_dev->usb_err = 0;
+	}
+
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	return 0;
+}
+
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+	int mode = 0;
+
+	se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 1);
+	if (gspca_dev->usb_err) {
+		/* Sometimes after being idle for a while the se401 won't
+		   respond and needs a good kicking  */
+		usb_reset_device(gspca_dev->dev);
+		gspca_dev->usb_err = 0;
+		se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 0);
+	}
+	se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 1, 0);
+
+	se401_set_feature(gspca_dev, HV7131_REG_MODE_B, 0x05);
+
+	/* set size + mode */
+	se401_write_req(gspca_dev, SE401_REQ_SET_WIDTH,
+			gspca_dev->width * mult, 0);
+	se401_write_req(gspca_dev, SE401_REQ_SET_HEIGHT,
+			gspca_dev->height * mult, 0);
+	/*
+	 * HDG: disabled this as it does not seem to do anything
+	 * se401_write_req(gspca_dev, SE401_REQ_SET_OUTPUT_MODE,
+	 *		   SE401_FORMAT_BAYER, 0);
+	 */
+
+	switch (mult) {
+	case 1: /* Raw bayer */
+		mode = 0x03; break;
+	case 2: /* 1/4th janggu */
+		mode = SE401_QUANT_FACT << 4; break;
+	case 4: /* 1/16th janggu */
+		mode = (SE401_QUANT_FACT << 4) | 0x02; break;
+	}
+	se401_set_feature(gspca_dev, SE401_OPERATINGMODE, mode);
+
+	setbrightness(gspca_dev);
+	setgain(gspca_dev);
+	setexposure(gspca_dev);
+	se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel);
+
+	sd->packet_read = 0;
+	sd->pixels_read = 0;
+	sd->restart_stream = 0;
+	sd->resetlevel_frame_count = 0;
+	sd->resetlevel_adjust_dir = 0;
+	sd->expo_change_state = EXPO_NO_CHANGE;
+
+	se401_write_req(gspca_dev, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, 0);
+
+	return gspca_dev->usb_err;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+	se401_write_req(gspca_dev, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, 0);
+	se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0);
+	se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 0, 0);
+}
+
+static void sd_dq_callback(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	unsigned int ahrc, alrc;
+	int oldreset, adjust_dir;
+
+	/* Restart the stream if requested do so by pkt_scan */
+	if (sd->restart_stream) {
+		sd_stopN(gspca_dev);
+		sd_start(gspca_dev);
+		sd->restart_stream = 0;
+	}
+
+	/* Automatically adjust sensor reset level
+	   Hyundai have some really nice docs about this and other sensor
+	   related stuff on their homepage: www.hei.co.kr */
+	sd->resetlevel_frame_count++;
+	if (sd->resetlevel_frame_count < 20)
+		return;
+
+	/* For some reason this normally read-only register doesn't get reset
+	   to zero after reading them just once... */
+	se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH);
+	se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL);
+	se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH);
+	se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL);
+	ahrc = 256*se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH) +
+	    se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL);
+	alrc = 256*se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH) +
+	    se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL);
+
+	/* Not an exact science, but it seems to work pretty well... */
+	oldreset = sd->resetlevel;
+	if (alrc > 10) {
+		while (alrc >= 10 && sd->resetlevel < 63) {
+			sd->resetlevel++;
+			alrc /= 2;
+		}
+	} else if (ahrc > 20) {
+		while (ahrc >= 20 && sd->resetlevel > 0) {
+			sd->resetlevel--;
+			ahrc /= 2;
+		}
+	}
+	/* Detect ping-pong-ing and halve adjustment to avoid overshoot */
+	if (sd->resetlevel > oldreset)
+		adjust_dir = 1;
+	else
+		adjust_dir = -1;
+	if (sd->resetlevel_adjust_dir &&
+	    sd->resetlevel_adjust_dir != adjust_dir)
+		sd->resetlevel = oldreset + (sd->resetlevel - oldreset) / 2;
+
+	if (sd->resetlevel != oldreset) {
+		sd->resetlevel_adjust_dir = adjust_dir;
+		se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel);
+	}
+
+	sd->resetlevel_frame_count = 0;
+}
+
+static void sd_complete_frame(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+
+	switch (sd->expo_change_state) {
+	case EXPO_CHANGED:
+		/* The exposure was changed while this frame
+		   was being send, so this frame is ok */
+		sd->expo_change_state = EXPO_DROP_FRAME;
+		break;
+	case EXPO_DROP_FRAME:
+		/* The exposure was changed while this frame
+		   was being captured, drop it! */
+		gspca_dev->last_packet_type = DISCARD_PACKET;
+		sd->expo_change_state = EXPO_NO_CHANGE;
+		break;
+	case EXPO_NO_CHANGE:
+		break;
+	}
+	gspca_frame_add(gspca_dev, LAST_PACKET, data, len);
+}
+
+static void sd_pkt_scan_janggu(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	int imagesize = gspca_dev->width * gspca_dev->height;
+	int i, plen, bits, pixels, info, count;
+
+	if (sd->restart_stream)
+		return;
+
+	/* Sometimes a 1024 bytes garbage bulk packet is send between frames */
+	if (gspca_dev->last_packet_type == LAST_PACKET && len == 1024) {
+		gspca_dev->last_packet_type = DISCARD_PACKET;
+		return;
+	}
+
+	i = 0;
+	while (i < len) {
+		/* Read header if not already be present from prev bulk pkt */
+		if (sd->packet_read < 4) {
+			count = 4 - sd->packet_read;
+			if (count > len - i)
+				count = len - i;
+			memcpy(&sd->packet[sd->packet_read], &data[i], count);
+			sd->packet_read += count;
+			i += count;
+			if (sd->packet_read < 4)
+				break;
+		}
+		bits   = sd->packet[3] + (sd->packet[2] << 8);
+		pixels = sd->packet[1] + ((sd->packet[0] & 0x3f) << 8);
+		info   = (sd->packet[0] & 0xc0) >> 6;
+		plen   = ((bits + 47) >> 4) << 1;
+		/* Sanity checks */
+		if (plen > 1024) {
+			err("invalid packet len %d restarting stream", plen);
+			goto error;
+		}
+		if (info == 3) {
+			err("unknown frame info value restarting stream");
+			goto error;
+		}
+
+		/* Read (remainder of) packet contents */
+		count = plen - sd->packet_read;
+		if (count > len - i)
+			count = len - i;
+		memcpy(&sd->packet[sd->packet_read], &data[i], count);
+		sd->packet_read += count;
+		i += count;
+		if (sd->packet_read < plen)
+			break;
+
+		sd->pixels_read += pixels;
+		sd->packet_read = 0;
+
+		switch (info) {
+		case 0: /* Frame data */
+			gspca_frame_add(gspca_dev, INTER_PACKET, sd->packet,
+					plen);
+			break;
+		case 1: /* EOF */
+			if (sd->pixels_read != imagesize) {
+				err("frame size %d expected %d",
+				    sd->pixels_read, imagesize);
+				goto error;
+			}
+			sd_complete_frame(gspca_dev, sd->packet, plen);
+			return; /* Discard the rest of the bulk packet !! */
+		case 2: /* SOF */
+			gspca_frame_add(gspca_dev, FIRST_PACKET, sd->packet,
+					plen);
+			sd->pixels_read = pixels;
+			break;
+		}
+	}
+	return;
+
+error:
+	sd->restart_stream = 1;
+	/* Give userspace a 0 bytes frame, so our dq callback gets
+	   called and it can restart the stream */
+	gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
+	gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
+}
+
+static void sd_pkt_scan_bayer(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct cam *cam = &gspca_dev->cam;
+	int imagesize = cam->cam_mode[gspca_dev->curr_mode].sizeimage;
+
+	if (gspca_dev->image_len == 0) {
+		gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
+		return;
+	}
+
+	if (gspca_dev->image_len + len >= imagesize) {
+		sd_complete_frame(gspca_dev, data, len);
+		return;
+	}
+
+	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+
+	if (len == 0)
+		return;
+
+	if (mult == 1) /* mult == 1 means raw bayer */
+		sd_pkt_scan_bayer(gspca_dev, data, len);
+	else
+		sd_pkt_scan_janggu(gspca_dev, data, len);
+}
+
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+			struct v4l2_querymenu *menu)
+{
+	switch (menu->id) {
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+		switch (menu->index) {
+		case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED:
+			strcpy((char *) menu->name, "NoFliker");
+			return 0;
+		case V4L2_CID_POWER_LINE_FREQUENCY_50HZ:
+			strcpy((char *) menu->name, "50 Hz");
+			return 0;
+		case V4L2_CID_POWER_LINE_FREQUENCY_60HZ:
+			strcpy((char *) menu->name, "60 Hz");
+			return 0;
+		}
+		break;
+	}
+	return -EINVAL;
+}
+
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	u8 state;
+
+	if (len != 2)
+		return -EINVAL;
+
+	switch (data[0]) {
+	case 0:
+	case 1:
+		state = data[0];
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (sd->button_state != state) {
+		input_report_key(gspca_dev->input_dev, KEY_CAMERA, state);
+		input_sync(gspca_dev->input_dev);
+		sd->button_state = state;
+	}
+
+	return 0;
+}
+#endif
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name = MODULE_NAME,
+	.ctrls = sd_ctrls,
+	.nctrls = ARRAY_SIZE(sd_ctrls),
+	.config = sd_config,
+	.init = sd_init,
+	.start = sd_start,
+	.stopN = sd_stopN,
+	.dq_callback = sd_dq_callback,
+	.pkt_scan = sd_pkt_scan,
+	.querymenu = sd_querymenu,
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	.int_pkt_scan = sd_int_pkt_scan,
+#endif
+};
+
+/* -- module initialisation -- */
+static const struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x03e8, 0x0004)}, /* Endpoints/Aox SE401 */
+	{USB_DEVICE(0x0471, 0x030b)}, /* Philips PCVC665K */
+	{USB_DEVICE(0x047d, 0x5001)}, /* Kensington 67014 */
+	{USB_DEVICE(0x047d, 0x5002)}, /* Kensington 6701(5/7) */
+	{USB_DEVICE(0x047d, 0x5003)}, /* Kensington 67016 */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+				THIS_MODULE);
+}
+
+static int sd_pre_reset(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static int sd_post_reset(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static struct usb_driver sd_driver = {
+	.name = MODULE_NAME,
+	.id_table = device_table,
+	.probe = sd_probe,
+	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
+	.pre_reset = sd_pre_reset,
+	.post_reset = sd_post_reset,
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+	return usb_register(&sd_driver);
+}
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/se401.h b/drivers/media/video/gspca/se401.h
new file mode 100644
index 0000000..96d8ebf
--- /dev/null
+++ b/drivers/media/video/gspca/se401.h
@@ -0,0 +1,90 @@
+/*
+ * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver
+ *
+ * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on the v4l1 se401 driver which is:
+ *
+ * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define SE401_REQ_GET_CAMERA_DESCRIPTOR		0x06
+#define SE401_REQ_START_CONTINUOUS_CAPTURE	0x41
+#define SE401_REQ_STOP_CONTINUOUS_CAPTURE	0x42
+#define SE401_REQ_CAPTURE_FRAME			0x43
+#define SE401_REQ_GET_BRT			0x44
+#define SE401_REQ_SET_BRT			0x45
+#define SE401_REQ_GET_WIDTH			0x4c
+#define SE401_REQ_SET_WIDTH			0x4d
+#define SE401_REQ_GET_HEIGHT			0x4e
+#define SE401_REQ_SET_HEIGHT			0x4f
+#define SE401_REQ_GET_OUTPUT_MODE		0x50
+#define SE401_REQ_SET_OUTPUT_MODE		0x51
+#define SE401_REQ_GET_EXT_FEATURE		0x52
+#define SE401_REQ_SET_EXT_FEATURE		0x53
+#define SE401_REQ_CAMERA_POWER			0x56
+#define SE401_REQ_LED_CONTROL			0x57
+#define SE401_REQ_BIOS				0xff
+
+#define SE401_BIOS_READ				0x07
+
+#define SE401_FORMAT_BAYER	0x40
+
+/* Hyundai hv7131b registers
+   7121 and 7141 should be the same (haven't really checked...) */
+/* Mode registers: */
+#define HV7131_REG_MODE_A		0x00
+#define HV7131_REG_MODE_B		0x01
+#define HV7131_REG_MODE_C		0x02
+/* Frame registers: */
+#define HV7131_REG_FRSU		0x10
+#define HV7131_REG_FRSL		0x11
+#define HV7131_REG_FCSU		0x12
+#define HV7131_REG_FCSL		0x13
+#define HV7131_REG_FWHU		0x14
+#define HV7131_REG_FWHL		0x15
+#define HV7131_REG_FWWU		0x16
+#define HV7131_REG_FWWL		0x17
+/* Timing registers: */
+#define HV7131_REG_THBU		0x20
+#define HV7131_REG_THBL		0x21
+#define HV7131_REG_TVBU		0x22
+#define HV7131_REG_TVBL		0x23
+#define HV7131_REG_TITU		0x25
+#define HV7131_REG_TITM		0x26
+#define HV7131_REG_TITL		0x27
+#define HV7131_REG_TMCD		0x28
+/* Adjust Registers: */
+#define HV7131_REG_ARLV		0x30
+#define HV7131_REG_ARCG		0x31
+#define HV7131_REG_AGCG		0x32
+#define HV7131_REG_ABCG		0x33
+#define HV7131_REG_APBV		0x34
+#define HV7131_REG_ASLP		0x54
+/* Offset Registers: */
+#define HV7131_REG_OFSR		0x50
+#define HV7131_REG_OFSG		0x51
+#define HV7131_REG_OFSB		0x52
+/* REset level statistics registers: */
+#define HV7131_REG_LOREFNOH	0x57
+#define HV7131_REG_LOREFNOL	0x58
+#define HV7131_REG_HIREFNOH	0x59
+#define HV7131_REG_HIREFNOL	0x5a
+
+/* se401 registers */
+#define SE401_OPERATINGMODE	0x2000
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index b089c0d..6ec2329 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -247,7 +247,6 @@ static const struct cmd spca504A_clicksmart420_init_data[] = {
 	{0x30, 0x0004, 0x000a},
 	{0xb0, 0x0001, 0x0000},
 
-
 	{0xa1, 0x0080, 0x0001},
 	{0x30, 0x0049, 0x0000},
 	{0x30, 0x0060, 0x0005},
@@ -256,8 +255,6 @@ static const struct cmd spca504A_clicksmart420_init_data[] = {
 	{0x00, 0x0000, 0x2000},
 	{0x00, 0x0013, 0x2301},
 	{0x00, 0x0003, 0x2000},
-	{0x00, 0x0000, 0x2000},
-
 };
 
 /* clicksmart 420 open data ? */
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 7e762d5..d1d733b 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -1387,7 +1387,7 @@ static int sd_querymenu(struct gspca_dev *gspca_dev,
 		return 0;
 	case V4L2_CID_EFFECTS:
 		if ((unsigned) menu->index < ARRAY_SIZE(effects_control)) {
-			strncpy((char *) menu->name,
+			strlcpy((char *) menu->name,
 				effects_control[menu->index],
 				sizeof menu->name);
 			return 0;
diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c
index 5f1db46..441dacf 100644
--- a/drivers/media/video/hdpvr/hdpvr-core.c
+++ b/drivers/media/video/hdpvr/hdpvr-core.c
@@ -474,5 +474,6 @@ module_init(hdpvr_init);
 module_exit(hdpvr_exit);
 
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.2.1");
 MODULE_AUTHOR("Janne Grunau");
 MODULE_DESCRIPTION("Hauppauge HD PVR driver");
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 514aea7..087f7c0 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -17,7 +17,6 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/mutex.h>
-#include <linux/version.h>
 #include <linux/workqueue.h>
 
 #include <linux/videodev2.h>
@@ -574,7 +573,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strcpy(cap->driver, "hdpvr");
 	strcpy(cap->card, "Hauppauge HD PVR");
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
-	cap->version = HDPVR_VERSION;
 	cap->capabilities =     V4L2_CAP_VIDEO_CAPTURE |
 				V4L2_CAP_AUDIO         |
 				V4L2_CAP_READWRITE;
diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h
index 072f23c..d6439db 100644
--- a/drivers/media/video/hdpvr/hdpvr.h
+++ b/drivers/media/video/hdpvr/hdpvr.h
@@ -18,12 +18,6 @@
 #include <media/v4l2-device.h>
 #include <media/ir-kbd-i2c.h>
 
-#define HDPVR_MAJOR_VERSION 0
-#define HDPVR_MINOR_VERSION 2
-#define HDPVR_RELEASE 0
-#define HDPVR_VERSION \
-	KERNEL_VERSION(HDPVR_MAJOR_VERSION, HDPVR_MINOR_VERSION, HDPVR_RELEASE)
-
 #define HDPVR_MAX 8
 #define HDPVR_I2C_MAX_SIZE 128
 
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index 84bdf0f..8f9cc17 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -36,7 +36,6 @@
  *                using information provided by Jiun-Kuei Jung @ AVerMedia.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index a7f54b0..38f0522 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -722,8 +722,8 @@ unsigned int ivtv_v4l2_dec_poll(struct file *filp, poll_table *wait)
 
 	/* If there are subscribed events, then only use the new event
 	   API instead of the old video.h based API. */
-	if (!list_empty(&id->fh.events->subscribed)) {
-		poll_wait(filp, &id->fh.events->wait, wait);
+	if (!list_empty(&id->fh.subscribed)) {
+		poll_wait(filp, &id->fh.wait, wait);
 		/* Turn off the old-style vsync events */
 		clear_bit(IVTV_F_I_EV_VSYNC_ENABLED, &itv->i_flags);
 		if (v4l2_event_pending(&id->fh))
@@ -750,6 +750,7 @@ unsigned int ivtv_v4l2_enc_poll(struct file *filp, poll_table * wait)
 	struct ivtv *itv = id->itv;
 	struct ivtv_stream *s = &itv->streams[id->type];
 	int eof = test_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
+	unsigned res = 0;
 
 	/* Start a capture if there is none */
 	if (!eof && !test_bit(IVTV_F_S_STREAMING, &s->s_flags)) {
@@ -769,12 +770,16 @@ unsigned int ivtv_v4l2_enc_poll(struct file *filp, poll_table * wait)
 	/* add stream's waitq to the poll list */
 	IVTV_DEBUG_HI_FILE("Encoder poll\n");
 	poll_wait(filp, &s->waitq, wait);
+	if (v4l2_event_pending(&id->fh))
+		res |= POLLPRI;
+	else
+		poll_wait(filp, &id->fh.wait, wait);
 
 	if (s->q_full.length || s->q_io.length)
-		return POLLIN | POLLRDNORM;
+		return res | POLLIN | POLLRDNORM;
 	if (eof)
-		return POLLHUP;
-	return 0;
+		return res | POLLHUP;
+	return res;
 }
 
 void ivtv_stop_capture(struct ivtv_open_id *id, int gop_end)
@@ -961,10 +966,6 @@ static int ivtv_serialized_open(struct ivtv_stream *s, struct file *filp)
 		return -ENOMEM;
 	}
 	v4l2_fh_init(&item->fh, s->vdev);
-	if (s->type == IVTV_DEC_STREAM_TYPE_YUV ||
-	    s->type == IVTV_DEC_STREAM_TYPE_MPG) {
-		res = v4l2_event_alloc(&item->fh, 60);
-	}
 	if (res < 0) {
 		v4l2_fh_exit(&item->fh);
 		kfree(item);
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 120c7d8..3e5c090 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -757,7 +757,6 @@ static int ivtv_querycap(struct file *file, void *fh, struct v4l2_capability *vc
 	strlcpy(vcap->driver, IVTV_DRIVER_NAME, sizeof(vcap->driver));
 	strlcpy(vcap->card, itv->card_name, sizeof(vcap->card));
 	snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(itv->pdev));
-	vcap->version = IVTV_DRIVER_VERSION; 	    /* version */
 	vcap->capabilities = itv->v4l2_cap; 	    /* capabilities */
 	return 0;
 }
@@ -1451,11 +1450,11 @@ static int ivtv_subscribe_event(struct v4l2_fh *fh, struct v4l2_event_subscripti
 	switch (sub->type) {
 	case V4L2_EVENT_VSYNC:
 	case V4L2_EVENT_EOS:
-		break;
+	case V4L2_EVENT_CTRL:
+		return v4l2_event_subscribe(fh, sub, 0);
 	default:
 		return -EINVAL;
 	}
-	return v4l2_event_subscribe(fh, sub);
 }
 
 static int ivtv_log_status(struct file *file, void *fh)
diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h
index b67a404..a20f346 100644
--- a/drivers/media/video/ivtv/ivtv-version.h
+++ b/drivers/media/video/ivtv/ivtv-version.h
@@ -21,11 +21,6 @@
 #define IVTV_VERSION_H
 
 #define IVTV_DRIVER_NAME "ivtv"
-#define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 4
-#define IVTV_DRIVER_VERSION_PATCHLEVEL 2
-
-#define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
-#define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL)
+#define IVTV_VERSION "1.4.3"
 
 #endif
diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c
index a45d8f0..3248ac8 100644
--- a/drivers/media/video/m5mols/m5mols_capture.c
+++ b/drivers/media/video/m5mols/m5mols_capture.c
@@ -18,7 +18,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/videodev2.h>
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index 43c68f5..fb8e4a7 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -18,7 +18,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/videodev2.h>
diff --git a/drivers/media/video/marvell-ccic/Kconfig b/drivers/media/video/marvell-ccic/Kconfig
new file mode 100644
index 0000000..bf739e3
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/Kconfig
@@ -0,0 +1,23 @@
+config VIDEO_CAFE_CCIC
+	tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
+	depends on PCI && I2C && VIDEO_V4L2
+	select VIDEO_OV7670
+	select VIDEOBUF2_VMALLOC
+	select VIDEOBUF2_DMA_CONTIG
+	---help---
+	  This is a video4linux2 driver for the Marvell 88ALP01 integrated
+	  CMOS camera controller.  This is the controller found on first-
+	  generation OLPC systems.
+
+config VIDEO_MMP_CAMERA
+	tristate "Marvell Armada 610 integrated camera controller support"
+	depends on ARCH_MMP && I2C && VIDEO_V4L2
+	select VIDEO_OV7670
+	select I2C_GPIO
+	select VIDEOBUF2_DMA_SG
+	---help---
+	  This is a Video4Linux2 driver for the integrated camera
+	  controller found on Marvell Armada 610 application
+	  processors (and likely beyond).  This is the controller found
+	  in OLPC XO 1.75 systems.
+
diff --git a/drivers/media/video/marvell-ccic/Makefile b/drivers/media/video/marvell-ccic/Makefile
new file mode 100644
index 0000000..05a792c5
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
+cafe_ccic-y := cafe-driver.o mcam-core.o
+
+obj-$(CONFIG_VIDEO_MMP_CAMERA) += mmp_camera.o
+mmp_camera-y := mmp-driver.o mcam-core.o
+
diff --git a/drivers/media/video/marvell-ccic/cafe-driver.c b/drivers/media/video/marvell-ccic/cafe-driver.c
new file mode 100644
index 0000000..d030f9b
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/cafe-driver.c
@@ -0,0 +1,654 @@
+/*
+ * A driver for the CMOS camera controller in the Marvell 88ALP01 "cafe"
+ * multifunction chip.  Currently works with the Omnivision OV7670
+ * sensor.
+ *
+ * The data sheet for this device can be found at:
+ *    http://www.marvell.com/products/pc_connectivity/88alp01/
+ *
+ * Copyright 2006-11 One Laptop Per Child Association, Inc.
+ * Copyright 2006-11 Jonathan Corbet <corbet@lwn.net>
+ *
+ * Written by Jonathan Corbet, corbet@lwn.net.
+ *
+ * v4l2_device/v4l2_subdev conversion by:
+ * Copyright (C) 2009 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License, version 2.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "mcam-core.h"
+
+#define CAFE_VERSION 0x000002
+
+
+/*
+ * Parameters.
+ */
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
+MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("Video");
+
+
+
+
+struct cafe_camera {
+	int registered;			/* Fully initialized? */
+	struct mcam_camera mcam;
+	struct pci_dev *pdev;
+	wait_queue_head_t smbus_wait;	/* Waiting on i2c events */
+};
+
+/*
+ * Most of the camera controller registers are defined in mcam-core.h,
+ * but the Cafe platform has some additional registers of its own;
+ * they are described here.
+ */
+
+/*
+ * "General purpose register" has a couple of GPIOs used for sensor
+ * power and reset on OLPC XO 1.0 systems.
+ */
+#define REG_GPR		0xb4
+#define	  GPR_C1EN	  0x00000020	/* Pad 1 (power down) enable */
+#define	  GPR_C0EN	  0x00000010	/* Pad 0 (reset) enable */
+#define	  GPR_C1	  0x00000002	/* Control 1 value */
+/*
+ * Control 0 is wired to reset on OLPC machines.  For ov7x sensors,
+ * it is active low.
+ */
+#define	  GPR_C0	  0x00000001	/* Control 0 value */
+
+/*
+ * These registers control the SMBUS module for communicating
+ * with the sensor.
+ */
+#define REG_TWSIC0	0xb8	/* TWSI (smbus) control 0 */
+#define	  TWSIC0_EN	  0x00000001	/* TWSI enable */
+#define	  TWSIC0_MODE	  0x00000002	/* 1 = 16-bit, 0 = 8-bit */
+#define	  TWSIC0_SID	  0x000003fc	/* Slave ID */
+/*
+ * Subtle trickery: the slave ID field starts with bit 2.  But the
+ * Linux i2c stack wants to treat the bottommost bit as a separate
+ * read/write bit, which is why slave ID's are usually presented
+ * >>1.  For consistency with that behavior, we shift over three
+ * bits instead of two.
+ */
+#define	  TWSIC0_SID_SHIFT 3
+#define	  TWSIC0_CLKDIV	  0x0007fc00	/* Clock divider */
+#define	  TWSIC0_MASKACK  0x00400000	/* Mask ack from sensor */
+#define	  TWSIC0_OVMAGIC  0x00800000	/* Make it work on OV sensors */
+
+#define REG_TWSIC1	0xbc	/* TWSI control 1 */
+#define	  TWSIC1_DATA	  0x0000ffff	/* Data to/from camchip */
+#define	  TWSIC1_ADDR	  0x00ff0000	/* Address (register) */
+#define	  TWSIC1_ADDR_SHIFT 16
+#define	  TWSIC1_READ	  0x01000000	/* Set for read op */
+#define	  TWSIC1_WSTAT	  0x02000000	/* Write status */
+#define	  TWSIC1_RVALID	  0x04000000	/* Read data valid */
+#define	  TWSIC1_ERROR	  0x08000000	/* Something screwed up */
+
+/*
+ * Here's the weird global control registers
+ */
+#define REG_GL_CSR     0x3004  /* Control/status register */
+#define	  GCSR_SRS	 0x00000001	/* SW Reset set */
+#define	  GCSR_SRC	 0x00000002	/* SW Reset clear */
+#define	  GCSR_MRS	 0x00000004	/* Master reset set */
+#define	  GCSR_MRC	 0x00000008	/* HW Reset clear */
+#define	  GCSR_CCIC_EN	 0x00004000    /* CCIC Clock enable */
+#define REG_GL_IMASK   0x300c  /* Interrupt mask register */
+#define	  GIMSK_CCIC_EN		 0x00000004    /* CCIC Interrupt enable */
+
+#define REG_GL_FCR	0x3038	/* GPIO functional control register */
+#define	  GFCR_GPIO_ON	  0x08		/* Camera GPIO enabled */
+#define REG_GL_GPIOR	0x315c	/* GPIO register */
+#define	  GGPIO_OUT		0x80000	/* GPIO output */
+#define	  GGPIO_VAL		0x00008	/* Output pin value */
+
+#define REG_LEN		       (REG_GL_IMASK + 4)
+
+
+/*
+ * Debugging and related.
+ */
+#define cam_err(cam, fmt, arg...) \
+	dev_err(&(cam)->pdev->dev, fmt, ##arg);
+#define cam_warn(cam, fmt, arg...) \
+	dev_warn(&(cam)->pdev->dev, fmt, ##arg);
+
+/* -------------------------------------------------------------------- */
+/*
+ * The I2C/SMBUS interface to the camera itself starts here.  The
+ * controller handles SMBUS itself, presenting a relatively simple register
+ * interface; all we have to do is to tell it where to route the data.
+ */
+#define CAFE_SMBUS_TIMEOUT (HZ)  /* generous */
+
+static inline struct cafe_camera *to_cam(struct v4l2_device *dev)
+{
+	struct mcam_camera *m = container_of(dev, struct mcam_camera, v4l2_dev);
+	return container_of(m, struct cafe_camera, mcam);
+}
+
+
+static int cafe_smbus_write_done(struct mcam_camera *mcam)
+{
+	unsigned long flags;
+	int c1;
+
+	/*
+	 * We must delay after the interrupt, or the controller gets confused
+	 * and never does give us good status.  Fortunately, we don't do this
+	 * often.
+	 */
+	udelay(20);
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	c1 = mcam_reg_read(mcam, REG_TWSIC1);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+	return (c1 & (TWSIC1_WSTAT|TWSIC1_ERROR)) != TWSIC1_WSTAT;
+}
+
+static int cafe_smbus_write_data(struct cafe_camera *cam,
+		u16 addr, u8 command, u8 value)
+{
+	unsigned int rval;
+	unsigned long flags;
+	struct mcam_camera *mcam = &cam->mcam;
+
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
+	rval |= TWSIC0_OVMAGIC;  /* Make OV sensors work */
+	/*
+	 * Marvell sez set clkdiv to all 1's for now.
+	 */
+	rval |= TWSIC0_CLKDIV;
+	mcam_reg_write(mcam, REG_TWSIC0, rval);
+	(void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */
+	rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
+	mcam_reg_write(mcam, REG_TWSIC1, rval);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+	/* Unfortunately, reading TWSIC1 too soon after sending a command
+	 * causes the device to die.
+	 * Use a busy-wait because we often send a large quantity of small
+	 * commands at-once; using msleep() would cause a lot of context
+	 * switches which take longer than 2ms, resulting in a noticeable
+	 * boot-time and capture-start delays.
+	 */
+	mdelay(2);
+
+	/*
+	 * Another sad fact is that sometimes, commands silently complete but
+	 * cafe_smbus_write_done() never becomes aware of this.
+	 * This happens at random and appears to possible occur with any
+	 * command.
+	 * We don't understand why this is. We work around this issue
+	 * with the timeout in the wait below, assuming that all commands
+	 * complete within the timeout.
+	 */
+	wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(mcam),
+			CAFE_SMBUS_TIMEOUT);
+
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	rval = mcam_reg_read(mcam, REG_TWSIC1);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+	if (rval & TWSIC1_WSTAT) {
+		cam_err(cam, "SMBUS write (%02x/%02x/%02x) timed out\n", addr,
+				command, value);
+		return -EIO;
+	}
+	if (rval & TWSIC1_ERROR) {
+		cam_err(cam, "SMBUS write (%02x/%02x/%02x) error\n", addr,
+				command, value);
+		return -EIO;
+	}
+	return 0;
+}
+
+
+
+static int cafe_smbus_read_done(struct mcam_camera *mcam)
+{
+	unsigned long flags;
+	int c1;
+
+	/*
+	 * We must delay after the interrupt, or the controller gets confused
+	 * and never does give us good status.  Fortunately, we don't do this
+	 * often.
+	 */
+	udelay(20);
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	c1 = mcam_reg_read(mcam, REG_TWSIC1);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+	return c1 & (TWSIC1_RVALID|TWSIC1_ERROR);
+}
+
+
+
+static int cafe_smbus_read_data(struct cafe_camera *cam,
+		u16 addr, u8 command, u8 *value)
+{
+	unsigned int rval;
+	unsigned long flags;
+	struct mcam_camera *mcam = &cam->mcam;
+
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
+	rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */
+	/*
+	 * Marvel sez set clkdiv to all 1's for now.
+	 */
+	rval |= TWSIC0_CLKDIV;
+	mcam_reg_write(mcam, REG_TWSIC0, rval);
+	(void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */
+	rval = TWSIC1_READ | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
+	mcam_reg_write(mcam, REG_TWSIC1, rval);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+	wait_event_timeout(cam->smbus_wait,
+			cafe_smbus_read_done(mcam), CAFE_SMBUS_TIMEOUT);
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	rval = mcam_reg_read(mcam, REG_TWSIC1);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+	if (rval & TWSIC1_ERROR) {
+		cam_err(cam, "SMBUS read (%02x/%02x) error\n", addr, command);
+		return -EIO;
+	}
+	if (!(rval & TWSIC1_RVALID)) {
+		cam_err(cam, "SMBUS read (%02x/%02x) timed out\n", addr,
+				command);
+		return -EIO;
+	}
+	*value = rval & 0xff;
+	return 0;
+}
+
+/*
+ * Perform a transfer over SMBUS.  This thing is called under
+ * the i2c bus lock, so we shouldn't race with ourselves...
+ */
+static int cafe_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+		unsigned short flags, char rw, u8 command,
+		int size, union i2c_smbus_data *data)
+{
+	struct cafe_camera *cam = i2c_get_adapdata(adapter);
+	int ret = -EINVAL;
+
+	/*
+	 * This interface would appear to only do byte data ops.  OK
+	 * it can do word too, but the cam chip has no use for that.
+	 */
+	if (size != I2C_SMBUS_BYTE_DATA) {
+		cam_err(cam, "funky xfer size %d\n", size);
+		return -EINVAL;
+	}
+
+	if (rw == I2C_SMBUS_WRITE)
+		ret = cafe_smbus_write_data(cam, addr, command, data->byte);
+	else if (rw == I2C_SMBUS_READ)
+		ret = cafe_smbus_read_data(cam, addr, command, &data->byte);
+	return ret;
+}
+
+
+static void cafe_smbus_enable_irq(struct cafe_camera *cam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cam->mcam.dev_lock, flags);
+	mcam_reg_set_bit(&cam->mcam, REG_IRQMASK, TWSIIRQS);
+	spin_unlock_irqrestore(&cam->mcam.dev_lock, flags);
+}
+
+static u32 cafe_smbus_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_READ_BYTE_DATA  |
+	       I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+}
+
+static struct i2c_algorithm cafe_smbus_algo = {
+	.smbus_xfer = cafe_smbus_xfer,
+	.functionality = cafe_smbus_func
+};
+
+static int cafe_smbus_setup(struct cafe_camera *cam)
+{
+	struct i2c_adapter *adap;
+	int ret;
+
+	adap = kzalloc(sizeof(*adap), GFP_KERNEL);
+	if (adap == NULL)
+		return -ENOMEM;
+	cam->mcam.i2c_adapter = adap;
+	cafe_smbus_enable_irq(cam);
+	adap->owner = THIS_MODULE;
+	adap->algo = &cafe_smbus_algo;
+	strcpy(adap->name, "cafe_ccic");
+	adap->dev.parent = &cam->pdev->dev;
+	i2c_set_adapdata(adap, cam);
+	ret = i2c_add_adapter(adap);
+	if (ret)
+		printk(KERN_ERR "Unable to register cafe i2c adapter\n");
+	return ret;
+}
+
+static void cafe_smbus_shutdown(struct cafe_camera *cam)
+{
+	i2c_del_adapter(cam->mcam.i2c_adapter);
+	kfree(cam->mcam.i2c_adapter);
+}
+
+
+/*
+ * Controller-level stuff
+ */
+
+static void cafe_ctlr_init(struct mcam_camera *mcam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	/*
+	 * Added magic to bring up the hardware on the B-Test board
+	 */
+	mcam_reg_write(mcam, 0x3038, 0x8);
+	mcam_reg_write(mcam, 0x315c, 0x80008);
+	/*
+	 * Go through the dance needed to wake the device up.
+	 * Note that these registers are global and shared
+	 * with the NAND and SD devices.  Interaction between the
+	 * three still needs to be examined.
+	 */
+	mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRS|GCSR_MRS); /* Needed? */
+	mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRC);
+	mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRS);
+	/*
+	 * Here we must wait a bit for the controller to come around.
+	 */
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+	msleep(5);
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+
+	mcam_reg_write(mcam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC);
+	mcam_reg_set_bit(mcam, REG_GL_IMASK, GIMSK_CCIC_EN);
+	/*
+	 * Mask all interrupts.
+	 */
+	mcam_reg_write(mcam, REG_IRQMASK, 0);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+}
+
+
+static void cafe_ctlr_power_up(struct mcam_camera *mcam)
+{
+	/*
+	 * Part one of the sensor dance: turn the global
+	 * GPIO signal on.
+	 */
+	mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON);
+	mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT|GGPIO_VAL);
+	/*
+	 * Put the sensor into operational mode (assumes OLPC-style
+	 * wiring).  Control 0 is reset - set to 1 to operate.
+	 * Control 1 is power down, set to 0 to operate.
+	 */
+	mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */
+	mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0);
+}
+
+static void cafe_ctlr_power_down(struct mcam_camera *mcam)
+{
+	mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1);
+	mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON);
+	mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT);
+}
+
+
+
+/*
+ * The platform interrupt handler.
+ */
+static irqreturn_t cafe_irq(int irq, void *data)
+{
+	struct cafe_camera *cam = data;
+	struct mcam_camera *mcam = &cam->mcam;
+	unsigned int irqs, handled;
+
+	spin_lock(&mcam->dev_lock);
+	irqs = mcam_reg_read(mcam, REG_IRQSTAT);
+	handled = cam->registered && mccic_irq(mcam, irqs);
+	if (irqs & TWSIIRQS) {
+		mcam_reg_write(mcam, REG_IRQSTAT, TWSIIRQS);
+		wake_up(&cam->smbus_wait);
+		handled = 1;
+	}
+	spin_unlock(&mcam->dev_lock);
+	return IRQ_RETVAL(handled);
+}
+
+
+/* -------------------------------------------------------------------------- */
+/*
+ * PCI interface stuff.
+ */
+
+static int cafe_pci_probe(struct pci_dev *pdev,
+		const struct pci_device_id *id)
+{
+	int ret;
+	struct cafe_camera *cam;
+	struct mcam_camera *mcam;
+
+	/*
+	 * Start putting together one of our big camera structures.
+	 */
+	ret = -ENOMEM;
+	cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL);
+	if (cam == NULL)
+		goto out;
+	cam->pdev = pdev;
+	mcam = &cam->mcam;
+	mcam->chip_id = V4L2_IDENT_CAFE;
+	spin_lock_init(&mcam->dev_lock);
+	init_waitqueue_head(&cam->smbus_wait);
+	mcam->plat_power_up = cafe_ctlr_power_up;
+	mcam->plat_power_down = cafe_ctlr_power_down;
+	mcam->dev = &pdev->dev;
+	/*
+	 * Set the clock speed for the XO 1; I don't believe this
+	 * driver has ever run anywhere else.
+	 */
+	mcam->clock_speed = 45;
+	mcam->use_smbus = 1;
+	/*
+	 * Vmalloc mode for buffers is traditional with this driver.
+	 * We *might* be able to run DMA_contig, especially on a system
+	 * with CMA in it.
+	 */
+	mcam->buffer_mode = B_vmalloc;
+	/*
+	 * Get set up on the PCI bus.
+	 */
+	ret = pci_enable_device(pdev);
+	if (ret)
+		goto out_free;
+	pci_set_master(pdev);
+
+	ret = -EIO;
+	mcam->regs = pci_iomap(pdev, 0, 0);
+	if (!mcam->regs) {
+		printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n");
+		goto out_disable;
+	}
+	ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam);
+	if (ret)
+		goto out_iounmap;
+
+	/*
+	 * Initialize the controller and leave it powered up.  It will
+	 * stay that way until the sensor driver shows up.
+	 */
+	cafe_ctlr_init(mcam);
+	cafe_ctlr_power_up(mcam);
+	/*
+	 * Set up I2C/SMBUS communications.  We have to drop the mutex here
+	 * because the sensor could attach in this call chain, leading to
+	 * unsightly deadlocks.
+	 */
+	ret = cafe_smbus_setup(cam);
+	if (ret)
+		goto out_pdown;
+
+	ret = mccic_register(mcam);
+	if (ret == 0) {
+		cam->registered = 1;
+		return 0;
+	}
+
+	cafe_smbus_shutdown(cam);
+out_pdown:
+	cafe_ctlr_power_down(mcam);
+	free_irq(pdev->irq, cam);
+out_iounmap:
+	pci_iounmap(pdev, mcam->regs);
+out_disable:
+	pci_disable_device(pdev);
+out_free:
+	kfree(cam);
+out:
+	return ret;
+}
+
+
+/*
+ * Shut down an initialized device
+ */
+static void cafe_shutdown(struct cafe_camera *cam)
+{
+	mccic_shutdown(&cam->mcam);
+	cafe_smbus_shutdown(cam);
+	free_irq(cam->pdev->irq, cam);
+	pci_iounmap(cam->pdev, cam->mcam.regs);
+}
+
+
+static void cafe_pci_remove(struct pci_dev *pdev)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
+	struct cafe_camera *cam = to_cam(v4l2_dev);
+
+	if (cam == NULL) {
+		printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev);
+		return;
+	}
+	cafe_shutdown(cam);
+	kfree(cam);
+}
+
+
+#ifdef CONFIG_PM
+/*
+ * Basic power management.
+ */
+static int cafe_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
+	struct cafe_camera *cam = to_cam(v4l2_dev);
+	int ret;
+
+	ret = pci_save_state(pdev);
+	if (ret)
+		return ret;
+	mccic_suspend(&cam->mcam);
+	pci_disable_device(pdev);
+	return 0;
+}
+
+
+static int cafe_pci_resume(struct pci_dev *pdev)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
+	struct cafe_camera *cam = to_cam(v4l2_dev);
+	int ret = 0;
+
+	pci_restore_state(pdev);
+	ret = pci_enable_device(pdev);
+
+	if (ret) {
+		cam_warn(cam, "Unable to re-enable device on resume!\n");
+		return ret;
+	}
+	cafe_ctlr_init(&cam->mcam);
+	return mccic_resume(&cam->mcam);
+}
+
+#endif  /* CONFIG_PM */
+
+static struct pci_device_id cafe_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL,
+		     PCI_DEVICE_ID_MARVELL_88ALP01_CCIC) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, cafe_ids);
+
+static struct pci_driver cafe_pci_driver = {
+	.name = "cafe1000-ccic",
+	.id_table = cafe_ids,
+	.probe = cafe_pci_probe,
+	.remove = cafe_pci_remove,
+#ifdef CONFIG_PM
+	.suspend = cafe_pci_suspend,
+	.resume = cafe_pci_resume,
+#endif
+};
+
+
+
+
+static int __init cafe_init(void)
+{
+	int ret;
+
+	printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n",
+			CAFE_VERSION);
+	ret = pci_register_driver(&cafe_pci_driver);
+	if (ret) {
+		printk(KERN_ERR "Unable to register cafe_ccic driver\n");
+		goto out;
+	}
+	ret = 0;
+
+out:
+	return ret;
+}
+
+
+static void __exit cafe_exit(void)
+{
+	pci_unregister_driver(&cafe_pci_driver);
+}
+
+module_init(cafe_init);
+module_exit(cafe_exit);
diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/video/marvell-ccic/mcam-core.c
new file mode 100644
index 0000000..83c1451
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/mcam-core.c
@@ -0,0 +1,1843 @@
+/*
+ * The Marvell camera core.  This device appears in a number of settings,
+ * so it needs platform-specific support outside of the core.
+ *
+ * Copyright 2011 Jonathan Corbet corbet@lwn.net
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <linux/io.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/ov7670.h>
+#include <media/videobuf2-vmalloc.h>
+#include <media/videobuf2-dma-contig.h>
+#include <media/videobuf2-dma-sg.h>
+
+#include "mcam-core.h"
+
+/*
+ * Basic frame stats - to be deleted shortly
+ */
+static int frames;
+static int singles;
+static int delivered;
+
+#ifdef MCAM_MODE_VMALLOC
+/*
+ * Internal DMA buffer management.  Since the controller cannot do S/G I/O,
+ * we must have physically contiguous buffers to bring frames into.
+ * These parameters control how many buffers we use, whether we
+ * allocate them at load time (better chance of success, but nails down
+ * memory) or when somebody tries to use the camera (riskier), and,
+ * for load-time allocation, how big they should be.
+ *
+ * The controller can cycle through three buffers.  We could use
+ * more by flipping pointers around, but it probably makes little
+ * sense.
+ */
+
+static int alloc_bufs_at_read;
+module_param(alloc_bufs_at_read, bool, 0444);
+MODULE_PARM_DESC(alloc_bufs_at_read,
+		"Non-zero value causes DMA buffers to be allocated when the "
+		"video capture device is read, rather than at module load "
+		"time.  This saves memory, but decreases the chances of "
+		"successfully getting those buffers.  This parameter is "
+		"only used in the vmalloc buffer mode");
+
+static int n_dma_bufs = 3;
+module_param(n_dma_bufs, uint, 0644);
+MODULE_PARM_DESC(n_dma_bufs,
+		"The number of DMA buffers to allocate.  Can be either two "
+		"(saves memory, makes timing tighter) or three.");
+
+static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2;  /* Worst case */
+module_param(dma_buf_size, uint, 0444);
+MODULE_PARM_DESC(dma_buf_size,
+		"The size of the allocated DMA buffers.  If actual operating "
+		"parameters require larger buffers, an attempt to reallocate "
+		"will be made.");
+#else /* MCAM_MODE_VMALLOC */
+static const int alloc_bufs_at_read = 0;
+static const int n_dma_bufs = 3;  /* Used by S/G_PARM */
+#endif /* MCAM_MODE_VMALLOC */
+
+static int flip;
+module_param(flip, bool, 0444);
+MODULE_PARM_DESC(flip,
+		"If set, the sensor will be instructed to flip the image "
+		"vertically.");
+
+static int buffer_mode = -1;
+module_param(buffer_mode, int, 0444);
+MODULE_PARM_DESC(buffer_mode,
+		"Set the buffer mode to be used; default is to go with what "
+		"the platform driver asks for.  Set to 0 for vmalloc, 1 for "
+		"DMA contiguous.");
+
+/*
+ * Status flags.  Always manipulated with bit operations.
+ */
+#define CF_BUF0_VALID	 0	/* Buffers valid - first three */
+#define CF_BUF1_VALID	 1
+#define CF_BUF2_VALID	 2
+#define CF_DMA_ACTIVE	 3	/* A frame is incoming */
+#define CF_CONFIG_NEEDED 4	/* Must configure hardware */
+#define CF_SINGLE_BUFFER 5	/* Running with a single buffer */
+#define CF_SG_RESTART	 6	/* SG restart needed */
+
+#define sensor_call(cam, o, f, args...) \
+	v4l2_subdev_call(cam->sensor, o, f, ##args)
+
+static struct mcam_format_struct {
+	__u8 *desc;
+	__u32 pixelformat;
+	int bpp;   /* Bytes per pixel */
+	enum v4l2_mbus_pixelcode mbus_code;
+} mcam_formats[] = {
+	{
+		.desc		= "YUYV 4:2:2",
+		.pixelformat	= V4L2_PIX_FMT_YUYV,
+		.mbus_code	= V4L2_MBUS_FMT_YUYV8_2X8,
+		.bpp		= 2,
+	},
+	{
+		.desc		= "RGB 444",
+		.pixelformat	= V4L2_PIX_FMT_RGB444,
+		.mbus_code	= V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE,
+		.bpp		= 2,
+	},
+	{
+		.desc		= "RGB 565",
+		.pixelformat	= V4L2_PIX_FMT_RGB565,
+		.mbus_code	= V4L2_MBUS_FMT_RGB565_2X8_LE,
+		.bpp		= 2,
+	},
+	{
+		.desc		= "Raw RGB Bayer",
+		.pixelformat	= V4L2_PIX_FMT_SBGGR8,
+		.mbus_code	= V4L2_MBUS_FMT_SBGGR8_1X8,
+		.bpp		= 1
+	},
+};
+#define N_MCAM_FMTS ARRAY_SIZE(mcam_formats)
+
+static struct mcam_format_struct *mcam_find_format(u32 pixelformat)
+{
+	unsigned i;
+
+	for (i = 0; i < N_MCAM_FMTS; i++)
+		if (mcam_formats[i].pixelformat == pixelformat)
+			return mcam_formats + i;
+	/* Not found? Then return the first format. */
+	return mcam_formats;
+}
+
+/*
+ * The default format we use until somebody says otherwise.
+ */
+static const struct v4l2_pix_format mcam_def_pix_format = {
+	.width		= VGA_WIDTH,
+	.height		= VGA_HEIGHT,
+	.pixelformat	= V4L2_PIX_FMT_YUYV,
+	.field		= V4L2_FIELD_NONE,
+	.bytesperline	= VGA_WIDTH*2,
+	.sizeimage	= VGA_WIDTH*VGA_HEIGHT*2,
+};
+
+static const enum v4l2_mbus_pixelcode mcam_def_mbus_code =
+					V4L2_MBUS_FMT_YUYV8_2X8;
+
+
+/*
+ * The two-word DMA descriptor format used by the Armada 610 and like.  There
+ * Is a three-word format as well (set C1_DESC_3WORD) where the third
+ * word is a pointer to the next descriptor, but we don't use it.  Two-word
+ * descriptors have to be contiguous in memory.
+ */
+struct mcam_dma_desc {
+	u32 dma_addr;
+	u32 segment_len;
+};
+
+/*
+ * Our buffer type for working with videobuf2.  Note that the vb2
+ * developers have decreed that struct vb2_buffer must be at the
+ * beginning of this structure.
+ */
+struct mcam_vb_buffer {
+	struct vb2_buffer vb_buf;
+	struct list_head queue;
+	struct mcam_dma_desc *dma_desc;	/* Descriptor virtual address */
+	dma_addr_t dma_desc_pa;		/* Descriptor physical address */
+	int dma_desc_nent;		/* Number of mapped descriptors */
+};
+
+static inline struct mcam_vb_buffer *vb_to_mvb(struct vb2_buffer *vb)
+{
+	return container_of(vb, struct mcam_vb_buffer, vb_buf);
+}
+
+/*
+ * Hand a completed buffer back to user space.
+ */
+static void mcam_buffer_done(struct mcam_camera *cam, int frame,
+		struct vb2_buffer *vbuf)
+{
+	vbuf->v4l2_buf.bytesused = cam->pix_format.sizeimage;
+	vbuf->v4l2_buf.sequence = cam->buf_seq[frame];
+	vb2_set_plane_payload(vbuf, 0, cam->pix_format.sizeimage);
+	vb2_buffer_done(vbuf, VB2_BUF_STATE_DONE);
+}
+
+
+
+/*
+ * Debugging and related.
+ */
+#define cam_err(cam, fmt, arg...) \
+	dev_err((cam)->dev, fmt, ##arg);
+#define cam_warn(cam, fmt, arg...) \
+	dev_warn((cam)->dev, fmt, ##arg);
+#define cam_dbg(cam, fmt, arg...) \
+	dev_dbg((cam)->dev, fmt, ##arg);
+
+
+/*
+ * Flag manipulation helpers
+ */
+static void mcam_reset_buffers(struct mcam_camera *cam)
+{
+	int i;
+
+	cam->next_buf = -1;
+	for (i = 0; i < cam->nbufs; i++)
+		clear_bit(i, &cam->flags);
+}
+
+static inline int mcam_needs_config(struct mcam_camera *cam)
+{
+	return test_bit(CF_CONFIG_NEEDED, &cam->flags);
+}
+
+static void mcam_set_config_needed(struct mcam_camera *cam, int needed)
+{
+	if (needed)
+		set_bit(CF_CONFIG_NEEDED, &cam->flags);
+	else
+		clear_bit(CF_CONFIG_NEEDED, &cam->flags);
+}
+
+/* ------------------------------------------------------------------- */
+/*
+ * Make the controller start grabbing images.  Everything must
+ * be set up before doing this.
+ */
+static void mcam_ctlr_start(struct mcam_camera *cam)
+{
+	/* set_bit performs a read, so no other barrier should be
+	   needed here */
+	mcam_reg_set_bit(cam, REG_CTRL0, C0_ENABLE);
+}
+
+static void mcam_ctlr_stop(struct mcam_camera *cam)
+{
+	mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
+}
+
+/* ------------------------------------------------------------------- */
+
+#ifdef MCAM_MODE_VMALLOC
+/*
+ * Code specific to the vmalloc buffer mode.
+ */
+
+/*
+ * Allocate in-kernel DMA buffers for vmalloc mode.
+ */
+static int mcam_alloc_dma_bufs(struct mcam_camera *cam, int loadtime)
+{
+	int i;
+
+	mcam_set_config_needed(cam, 1);
+	if (loadtime)
+		cam->dma_buf_size = dma_buf_size;
+	else
+		cam->dma_buf_size = cam->pix_format.sizeimage;
+	if (n_dma_bufs > 3)
+		n_dma_bufs = 3;
+
+	cam->nbufs = 0;
+	for (i = 0; i < n_dma_bufs; i++) {
+		cam->dma_bufs[i] = dma_alloc_coherent(cam->dev,
+				cam->dma_buf_size, cam->dma_handles + i,
+				GFP_KERNEL);
+		if (cam->dma_bufs[i] == NULL) {
+			cam_warn(cam, "Failed to allocate DMA buffer\n");
+			break;
+		}
+		(cam->nbufs)++;
+	}
+
+	switch (cam->nbufs) {
+	case 1:
+		dma_free_coherent(cam->dev, cam->dma_buf_size,
+				cam->dma_bufs[0], cam->dma_handles[0]);
+		cam->nbufs = 0;
+	case 0:
+		cam_err(cam, "Insufficient DMA buffers, cannot operate\n");
+		return -ENOMEM;
+
+	case 2:
+		if (n_dma_bufs > 2)
+			cam_warn(cam, "Will limp along with only 2 buffers\n");
+		break;
+	}
+	return 0;
+}
+
+static void mcam_free_dma_bufs(struct mcam_camera *cam)
+{
+	int i;
+
+	for (i = 0; i < cam->nbufs; i++) {
+		dma_free_coherent(cam->dev, cam->dma_buf_size,
+				cam->dma_bufs[i], cam->dma_handles[i]);
+		cam->dma_bufs[i] = NULL;
+	}
+	cam->nbufs = 0;
+}
+
+
+/*
+ * Set up DMA buffers when operating in vmalloc mode
+ */
+static void mcam_ctlr_dma_vmalloc(struct mcam_camera *cam)
+{
+	/*
+	 * Store the first two Y buffers (we aren't supporting
+	 * planar formats for now, so no UV bufs).  Then either
+	 * set the third if it exists, or tell the controller
+	 * to just use two.
+	 */
+	mcam_reg_write(cam, REG_Y0BAR, cam->dma_handles[0]);
+	mcam_reg_write(cam, REG_Y1BAR, cam->dma_handles[1]);
+	if (cam->nbufs > 2) {
+		mcam_reg_write(cam, REG_Y2BAR, cam->dma_handles[2]);
+		mcam_reg_clear_bit(cam, REG_CTRL1, C1_TWOBUFS);
+	} else
+		mcam_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS);
+	if (cam->chip_id == V4L2_IDENT_CAFE)
+		mcam_reg_write(cam, REG_UBAR, 0); /* 32 bits only */
+}
+
+/*
+ * Copy data out to user space in the vmalloc case
+ */
+static void mcam_frame_tasklet(unsigned long data)
+{
+	struct mcam_camera *cam = (struct mcam_camera *) data;
+	int i;
+	unsigned long flags;
+	struct mcam_vb_buffer *buf;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	for (i = 0; i < cam->nbufs; i++) {
+		int bufno = cam->next_buf;
+
+		if (cam->state != S_STREAMING || bufno < 0)
+			break;  /* I/O got stopped */
+		if (++(cam->next_buf) >= cam->nbufs)
+			cam->next_buf = 0;
+		if (!test_bit(bufno, &cam->flags))
+			continue;
+		if (list_empty(&cam->buffers)) {
+			singles++;
+			break;  /* Leave it valid, hope for better later */
+		}
+		delivered++;
+		clear_bit(bufno, &cam->flags);
+		buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer,
+				queue);
+		list_del_init(&buf->queue);
+		/*
+		 * Drop the lock during the big copy.  This *should* be safe...
+		 */
+		spin_unlock_irqrestore(&cam->dev_lock, flags);
+		memcpy(vb2_plane_vaddr(&buf->vb_buf, 0), cam->dma_bufs[bufno],
+				cam->pix_format.sizeimage);
+		mcam_buffer_done(cam, bufno, &buf->vb_buf);
+		spin_lock_irqsave(&cam->dev_lock, flags);
+	}
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+
+/*
+ * Make sure our allocated buffers are up to the task.
+ */
+static int mcam_check_dma_buffers(struct mcam_camera *cam)
+{
+	if (cam->nbufs > 0 && cam->dma_buf_size < cam->pix_format.sizeimage)
+			mcam_free_dma_bufs(cam);
+	if (cam->nbufs == 0)
+		return mcam_alloc_dma_bufs(cam, 0);
+	return 0;
+}
+
+static void mcam_vmalloc_done(struct mcam_camera *cam, int frame)
+{
+	tasklet_schedule(&cam->s_tasklet);
+}
+
+#else /* MCAM_MODE_VMALLOC */
+
+static inline int mcam_alloc_dma_bufs(struct mcam_camera *cam, int loadtime)
+{
+	return 0;
+}
+
+static inline void mcam_free_dma_bufs(struct mcam_camera *cam)
+{
+	return;
+}
+
+static inline int mcam_check_dma_buffers(struct mcam_camera *cam)
+{
+	return 0;
+}
+
+
+
+#endif /* MCAM_MODE_VMALLOC */
+
+
+#ifdef MCAM_MODE_DMA_CONTIG
+/* ---------------------------------------------------------------------- */
+/*
+ * DMA-contiguous code.
+ */
+/*
+ * Set up a contiguous buffer for the given frame.  Here also is where
+ * the underrun strategy is set: if there is no buffer available, reuse
+ * the buffer from the other BAR and set the CF_SINGLE_BUFFER flag to
+ * keep the interrupt handler from giving that buffer back to user
+ * space.  In this way, we always have a buffer to DMA to and don't
+ * have to try to play games stopping and restarting the controller.
+ */
+static void mcam_set_contig_buffer(struct mcam_camera *cam, int frame)
+{
+	struct mcam_vb_buffer *buf;
+	/*
+	 * If there are no available buffers, go into single mode
+	 */
+	if (list_empty(&cam->buffers)) {
+		buf = cam->vb_bufs[frame ^ 0x1];
+		cam->vb_bufs[frame] = buf;
+		mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR,
+				vb2_dma_contig_plane_paddr(&buf->vb_buf, 0));
+		set_bit(CF_SINGLE_BUFFER, &cam->flags);
+		singles++;
+		return;
+	}
+	/*
+	 * OK, we have a buffer we can use.
+	 */
+	buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue);
+	list_del_init(&buf->queue);
+	mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR,
+			vb2_dma_contig_plane_paddr(&buf->vb_buf, 0));
+	cam->vb_bufs[frame] = buf;
+	clear_bit(CF_SINGLE_BUFFER, &cam->flags);
+}
+
+/*
+ * Initial B_DMA_contig setup.
+ */
+static void mcam_ctlr_dma_contig(struct mcam_camera *cam)
+{
+	mcam_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS);
+	cam->nbufs = 2;
+	mcam_set_contig_buffer(cam, 0);
+	mcam_set_contig_buffer(cam, 1);
+}
+
+/*
+ * Frame completion handling.
+ */
+static void mcam_dma_contig_done(struct mcam_camera *cam, int frame)
+{
+	struct mcam_vb_buffer *buf = cam->vb_bufs[frame];
+
+	if (!test_bit(CF_SINGLE_BUFFER, &cam->flags)) {
+		delivered++;
+		mcam_buffer_done(cam, frame, &buf->vb_buf);
+	}
+	mcam_set_contig_buffer(cam, frame);
+}
+
+#endif /* MCAM_MODE_DMA_CONTIG */
+
+#ifdef MCAM_MODE_DMA_SG
+/* ---------------------------------------------------------------------- */
+/*
+ * Scatter/gather-specific code.
+ */
+
+/*
+ * Set up the next buffer for S/G I/O; caller should be sure that
+ * the controller is stopped and a buffer is available.
+ */
+static void mcam_sg_next_buffer(struct mcam_camera *cam)
+{
+	struct mcam_vb_buffer *buf;
+
+	buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue);
+	list_del_init(&buf->queue);
+	mcam_reg_write(cam, REG_DMA_DESC_Y, buf->dma_desc_pa);
+	mcam_reg_write(cam, REG_DESC_LEN_Y,
+			buf->dma_desc_nent*sizeof(struct mcam_dma_desc));
+	mcam_reg_write(cam, REG_DESC_LEN_U, 0);
+	mcam_reg_write(cam, REG_DESC_LEN_V, 0);
+	cam->vb_bufs[0] = buf;
+}
+
+/*
+ * Initial B_DMA_sg setup
+ */
+static void mcam_ctlr_dma_sg(struct mcam_camera *cam)
+{
+	mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_3WORD);
+	mcam_sg_next_buffer(cam);
+	mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA);
+	cam->nbufs = 3;
+}
+
+
+/*
+ * Frame completion with S/G is trickier.  We can't muck with
+ * a descriptor chain on the fly, since the controller buffers it
+ * internally.  So we have to actually stop and restart; Marvell
+ * says this is the way to do it.
+ *
+ * Of course, stopping is easier said than done; experience shows
+ * that the controller can start a frame *after* C0_ENABLE has been
+ * cleared.  So when running in S/G mode, the controller is "stopped"
+ * on receipt of the start-of-frame interrupt.  That means we can
+ * safely change the DMA descriptor array here and restart things
+ * (assuming there's another buffer waiting to go).
+ */
+static void mcam_dma_sg_done(struct mcam_camera *cam, int frame)
+{
+	struct mcam_vb_buffer *buf = cam->vb_bufs[0];
+
+	/*
+	 * Very Bad Not Good Things happen if you don't clear
+	 * C1_DESC_ENA before making any descriptor changes.
+	 */
+	mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_ENA);
+	/*
+	 * If we have another buffer available, put it in and
+	 * restart the engine.
+	 */
+	if (!list_empty(&cam->buffers)) {
+		mcam_sg_next_buffer(cam);
+		mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA);
+		mcam_ctlr_start(cam);
+	/*
+	 * Otherwise set CF_SG_RESTART and the controller will
+	 * be restarted once another buffer shows up.
+	 */
+	} else {
+		set_bit(CF_SG_RESTART, &cam->flags);
+		singles++;
+	}
+	/*
+	 * Now we can give the completed frame back to user space.
+	 */
+	delivered++;
+	mcam_buffer_done(cam, frame, &buf->vb_buf);
+}
+
+
+/*
+ * Scatter/gather mode requires stopping the controller between
+ * frames so we can put in a new DMA descriptor array.  If no new
+ * buffer exists at frame completion, the controller is left stopped;
+ * this function is charged with gettig things going again.
+ */
+static void mcam_sg_restart(struct mcam_camera *cam)
+{
+	mcam_ctlr_dma_sg(cam);
+	mcam_ctlr_start(cam);
+	clear_bit(CF_SG_RESTART, &cam->flags);
+}
+
+#else /* MCAM_MODE_DMA_SG */
+
+static inline void mcam_sg_restart(struct mcam_camera *cam)
+{
+	return;
+}
+
+#endif /* MCAM_MODE_DMA_SG */
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Buffer-mode-independent controller code.
+ */
+
+/*
+ * Image format setup
+ */
+static void mcam_ctlr_image(struct mcam_camera *cam)
+{
+	int imgsz;
+	struct v4l2_pix_format *fmt = &cam->pix_format;
+
+	imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) |
+		(fmt->bytesperline & IMGSZ_H_MASK);
+	mcam_reg_write(cam, REG_IMGSIZE, imgsz);
+	mcam_reg_write(cam, REG_IMGOFFSET, 0);
+	/* YPITCH just drops the last two bits */
+	mcam_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline,
+			IMGP_YP_MASK);
+	/*
+	 * Tell the controller about the image format we are using.
+	 */
+	switch (cam->pix_format.pixelformat) {
+	case V4L2_PIX_FMT_YUYV:
+	    mcam_reg_write_mask(cam, REG_CTRL0,
+			    C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV,
+			    C0_DF_MASK);
+	    break;
+
+	case V4L2_PIX_FMT_RGB444:
+	    mcam_reg_write_mask(cam, REG_CTRL0,
+			    C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB,
+			    C0_DF_MASK);
+		/* Alpha value? */
+	    break;
+
+	case V4L2_PIX_FMT_RGB565:
+	    mcam_reg_write_mask(cam, REG_CTRL0,
+			    C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR,
+			    C0_DF_MASK);
+	    break;
+
+	default:
+	    cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat);
+	    break;
+	}
+	/*
+	 * Make sure it knows we want to use hsync/vsync.
+	 */
+	mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC,
+			C0_SIFM_MASK);
+}
+
+
+/*
+ * Configure the controller for operation; caller holds the
+ * device mutex.
+ */
+static int mcam_ctlr_configure(struct mcam_camera *cam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	cam->dma_setup(cam);
+	mcam_ctlr_image(cam);
+	mcam_set_config_needed(cam, 0);
+	clear_bit(CF_SG_RESTART, &cam->flags);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	return 0;
+}
+
+static void mcam_ctlr_irq_enable(struct mcam_camera *cam)
+{
+	/*
+	 * Clear any pending interrupts, since we do not
+	 * expect to have I/O active prior to enabling.
+	 */
+	mcam_reg_write(cam, REG_IRQSTAT, FRAMEIRQS);
+	mcam_reg_set_bit(cam, REG_IRQMASK, FRAMEIRQS);
+}
+
+static void mcam_ctlr_irq_disable(struct mcam_camera *cam)
+{
+	mcam_reg_clear_bit(cam, REG_IRQMASK, FRAMEIRQS);
+}
+
+
+
+static void mcam_ctlr_init(struct mcam_camera *cam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	/*
+	 * Make sure it's not powered down.
+	 */
+	mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
+	/*
+	 * Turn off the enable bit.  It sure should be off anyway,
+	 * but it's good to be sure.
+	 */
+	mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
+	/*
+	 * Clock the sensor appropriately.  Controller clock should
+	 * be 48MHz, sensor "typical" value is half that.
+	 */
+	mcam_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+
+/*
+ * Stop the controller, and don't return until we're really sure that no
+ * further DMA is going on.
+ */
+static void mcam_ctlr_stop_dma(struct mcam_camera *cam)
+{
+	unsigned long flags;
+
+	/*
+	 * Theory: stop the camera controller (whether it is operating
+	 * or not).  Delay briefly just in case we race with the SOF
+	 * interrupt, then wait until no DMA is active.
+	 */
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	clear_bit(CF_SG_RESTART, &cam->flags);
+	mcam_ctlr_stop(cam);
+	cam->state = S_IDLE;
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	msleep(40);
+	if (test_bit(CF_DMA_ACTIVE, &cam->flags))
+		cam_err(cam, "Timeout waiting for DMA to end\n");
+		/* This would be bad news - what now? */
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	mcam_ctlr_irq_disable(cam);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+/*
+ * Power up and down.
+ */
+static void mcam_ctlr_power_up(struct mcam_camera *cam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	cam->plat_power_up(cam);
+	mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	msleep(5); /* Just to be sure */
+}
+
+static void mcam_ctlr_power_down(struct mcam_camera *cam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	/*
+	 * School of hard knocks department: be sure we do any register
+	 * twiddling on the controller *before* calling the platform
+	 * power down routine.
+	 */
+	mcam_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN);
+	cam->plat_power_down(cam);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+/* -------------------------------------------------------------------- */
+/*
+ * Communications with the sensor.
+ */
+
+static int __mcam_cam_reset(struct mcam_camera *cam)
+{
+	return sensor_call(cam, core, reset, 0);
+}
+
+/*
+ * We have found the sensor on the i2c.  Let's try to have a
+ * conversation.
+ */
+static int mcam_cam_init(struct mcam_camera *cam)
+{
+	struct v4l2_dbg_chip_ident chip;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	if (cam->state != S_NOTREADY)
+		cam_warn(cam, "Cam init with device in funky state %d",
+				cam->state);
+	ret = __mcam_cam_reset(cam);
+	if (ret)
+		goto out;
+	chip.ident = V4L2_IDENT_NONE;
+	chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
+	chip.match.addr = cam->sensor_addr;
+	ret = sensor_call(cam, core, g_chip_ident, &chip);
+	if (ret)
+		goto out;
+	cam->sensor_type = chip.ident;
+	if (cam->sensor_type != V4L2_IDENT_OV7670) {
+		cam_err(cam, "Unsupported sensor type 0x%x", cam->sensor_type);
+		ret = -EINVAL;
+		goto out;
+	}
+/* Get/set parameters? */
+	ret = 0;
+	cam->state = S_IDLE;
+out:
+	mcam_ctlr_power_down(cam);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+/*
+ * Configure the sensor to match the parameters we have.  Caller should
+ * hold s_mutex
+ */
+static int mcam_cam_set_flip(struct mcam_camera *cam)
+{
+	struct v4l2_control ctrl;
+
+	memset(&ctrl, 0, sizeof(ctrl));
+	ctrl.id = V4L2_CID_VFLIP;
+	ctrl.value = flip;
+	return sensor_call(cam, core, s_ctrl, &ctrl);
+}
+
+
+static int mcam_cam_configure(struct mcam_camera *cam)
+{
+	struct v4l2_mbus_framefmt mbus_fmt;
+	int ret;
+
+	v4l2_fill_mbus_format(&mbus_fmt, &cam->pix_format, cam->mbus_code);
+	ret = sensor_call(cam, core, init, 0);
+	if (ret == 0)
+		ret = sensor_call(cam, video, s_mbus_fmt, &mbus_fmt);
+	/*
+	 * OV7670 does weird things if flip is set *before* format...
+	 */
+	ret += mcam_cam_set_flip(cam);
+	return ret;
+}
+
+/*
+ * Get everything ready, and start grabbing frames.
+ */
+static int mcam_read_setup(struct mcam_camera *cam)
+{
+	int ret;
+	unsigned long flags;
+
+	/*
+	 * Configuration.  If we still don't have DMA buffers,
+	 * make one last, desperate attempt.
+	 */
+	if (cam->buffer_mode == B_vmalloc && cam->nbufs == 0 &&
+			mcam_alloc_dma_bufs(cam, 0))
+		return -ENOMEM;
+
+	if (mcam_needs_config(cam)) {
+		mcam_cam_configure(cam);
+		ret = mcam_ctlr_configure(cam);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Turn it loose.
+	 */
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	mcam_reset_buffers(cam);
+	mcam_ctlr_irq_enable(cam);
+	cam->state = S_STREAMING;
+	mcam_ctlr_start(cam);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+/*
+ * Videobuf2 interface code.
+ */
+
+static int mcam_vb_queue_setup(struct vb2_queue *vq, unsigned int *nbufs,
+		unsigned int *num_planes, unsigned long sizes[],
+		void *alloc_ctxs[])
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vq);
+	int minbufs = (cam->buffer_mode == B_DMA_contig) ? 3 : 2;
+
+	sizes[0] = cam->pix_format.sizeimage;
+	*num_planes = 1; /* Someday we have to support planar formats... */
+	if (*nbufs < minbufs)
+		*nbufs = minbufs;
+	if (cam->buffer_mode == B_DMA_contig)
+		alloc_ctxs[0] = cam->vb_alloc_ctx;
+	return 0;
+}
+
+
+static void mcam_vb_buf_queue(struct vb2_buffer *vb)
+{
+	struct mcam_vb_buffer *mvb = vb_to_mvb(vb);
+	struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+	unsigned long flags;
+	int start;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	start = (cam->state == S_BUFWAIT) && !list_empty(&cam->buffers);
+	list_add(&mvb->queue, &cam->buffers);
+	if (test_bit(CF_SG_RESTART, &cam->flags))
+		mcam_sg_restart(cam);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	if (start)
+		mcam_read_setup(cam);
+}
+
+
+/*
+ * vb2 uses these to release the mutex when waiting in dqbuf.  I'm
+ * not actually sure we need to do this (I'm not sure that vb2_dqbuf() needs
+ * to be called with the mutex held), but better safe than sorry.
+ */
+static void mcam_vb_wait_prepare(struct vb2_queue *vq)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vq);
+
+	mutex_unlock(&cam->s_mutex);
+}
+
+static void mcam_vb_wait_finish(struct vb2_queue *vq)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vq);
+
+	mutex_lock(&cam->s_mutex);
+}
+
+/*
+ * These need to be called with the mutex held from vb2
+ */
+static int mcam_vb_start_streaming(struct vb2_queue *vq)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vq);
+
+	if (cam->state != S_IDLE)
+		return -EINVAL;
+	cam->sequence = 0;
+	/*
+	 * Videobuf2 sneakily hoards all the buffers and won't
+	 * give them to us until *after* streaming starts.  But
+	 * we can't actually start streaming until we have a
+	 * destination.  So go into a wait state and hope they
+	 * give us buffers soon.
+	 */
+	if (cam->buffer_mode != B_vmalloc && list_empty(&cam->buffers)) {
+		cam->state = S_BUFWAIT;
+		return 0;
+	}
+	return mcam_read_setup(cam);
+}
+
+static int mcam_vb_stop_streaming(struct vb2_queue *vq)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vq);
+	unsigned long flags;
+
+	if (cam->state == S_BUFWAIT) {
+		/* They never gave us buffers */
+		cam->state = S_IDLE;
+		return 0;
+	}
+	if (cam->state != S_STREAMING)
+		return -EINVAL;
+	mcam_ctlr_stop_dma(cam);
+	/*
+	 * VB2 reclaims the buffers, so we need to forget
+	 * about them.
+	 */
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	INIT_LIST_HEAD(&cam->buffers);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	return 0;
+}
+
+
+static const struct vb2_ops mcam_vb2_ops = {
+	.queue_setup		= mcam_vb_queue_setup,
+	.buf_queue		= mcam_vb_buf_queue,
+	.start_streaming	= mcam_vb_start_streaming,
+	.stop_streaming		= mcam_vb_stop_streaming,
+	.wait_prepare		= mcam_vb_wait_prepare,
+	.wait_finish		= mcam_vb_wait_finish,
+};
+
+
+#ifdef MCAM_MODE_DMA_SG
+/*
+ * Scatter/gather mode uses all of the above functions plus a
+ * few extras to deal with DMA mapping.
+ */
+static int mcam_vb_sg_buf_init(struct vb2_buffer *vb)
+{
+	struct mcam_vb_buffer *mvb = vb_to_mvb(vb);
+	struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+	int ndesc = cam->pix_format.sizeimage/PAGE_SIZE + 1;
+
+	mvb->dma_desc = dma_alloc_coherent(cam->dev,
+			ndesc * sizeof(struct mcam_dma_desc),
+			&mvb->dma_desc_pa, GFP_KERNEL);
+	if (mvb->dma_desc == NULL) {
+		cam_err(cam, "Unable to get DMA descriptor array\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int mcam_vb_sg_buf_prepare(struct vb2_buffer *vb)
+{
+	struct mcam_vb_buffer *mvb = vb_to_mvb(vb);
+	struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_dma_sg_desc *sgd = vb2_dma_sg_plane_desc(vb, 0);
+	struct mcam_dma_desc *desc = mvb->dma_desc;
+	struct scatterlist *sg;
+	int i;
+
+	mvb->dma_desc_nent = dma_map_sg(cam->dev, sgd->sglist, sgd->num_pages,
+			DMA_FROM_DEVICE);
+	if (mvb->dma_desc_nent <= 0)
+		return -EIO;  /* Not sure what's right here */
+	for_each_sg(sgd->sglist, sg, mvb->dma_desc_nent, i) {
+		desc->dma_addr = sg_dma_address(sg);
+		desc->segment_len = sg_dma_len(sg);
+		desc++;
+	}
+	return 0;
+}
+
+static int mcam_vb_sg_buf_finish(struct vb2_buffer *vb)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_dma_sg_desc *sgd = vb2_dma_sg_plane_desc(vb, 0);
+
+	dma_unmap_sg(cam->dev, sgd->sglist, sgd->num_pages, DMA_FROM_DEVICE);
+	return 0;
+}
+
+static void mcam_vb_sg_buf_cleanup(struct vb2_buffer *vb)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+	struct mcam_vb_buffer *mvb = vb_to_mvb(vb);
+	int ndesc = cam->pix_format.sizeimage/PAGE_SIZE + 1;
+
+	dma_free_coherent(cam->dev, ndesc * sizeof(struct mcam_dma_desc),
+			mvb->dma_desc, mvb->dma_desc_pa);
+}
+
+
+static const struct vb2_ops mcam_vb2_sg_ops = {
+	.queue_setup		= mcam_vb_queue_setup,
+	.buf_init		= mcam_vb_sg_buf_init,
+	.buf_prepare		= mcam_vb_sg_buf_prepare,
+	.buf_queue		= mcam_vb_buf_queue,
+	.buf_finish		= mcam_vb_sg_buf_finish,
+	.buf_cleanup		= mcam_vb_sg_buf_cleanup,
+	.start_streaming	= mcam_vb_start_streaming,
+	.stop_streaming		= mcam_vb_stop_streaming,
+	.wait_prepare		= mcam_vb_wait_prepare,
+	.wait_finish		= mcam_vb_wait_finish,
+};
+
+#endif /* MCAM_MODE_DMA_SG */
+
+static int mcam_setup_vb2(struct mcam_camera *cam)
+{
+	struct vb2_queue *vq = &cam->vb_queue;
+
+	memset(vq, 0, sizeof(*vq));
+	vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	vq->drv_priv = cam;
+	INIT_LIST_HEAD(&cam->buffers);
+	switch (cam->buffer_mode) {
+	case B_DMA_contig:
+#ifdef MCAM_MODE_DMA_CONTIG
+		vq->ops = &mcam_vb2_ops;
+		vq->mem_ops = &vb2_dma_contig_memops;
+		cam->vb_alloc_ctx = vb2_dma_contig_init_ctx(cam->dev);
+		vq->io_modes = VB2_MMAP | VB2_USERPTR;
+		cam->dma_setup = mcam_ctlr_dma_contig;
+		cam->frame_complete = mcam_dma_contig_done;
+#endif
+		break;
+	case B_DMA_sg:
+#ifdef MCAM_MODE_DMA_SG
+		vq->ops = &mcam_vb2_sg_ops;
+		vq->mem_ops = &vb2_dma_sg_memops;
+		vq->io_modes = VB2_MMAP | VB2_USERPTR;
+		cam->dma_setup = mcam_ctlr_dma_sg;
+		cam->frame_complete = mcam_dma_sg_done;
+#endif
+		break;
+	case B_vmalloc:
+#ifdef MCAM_MODE_VMALLOC
+		tasklet_init(&cam->s_tasklet, mcam_frame_tasklet,
+				(unsigned long) cam);
+		vq->ops = &mcam_vb2_ops;
+		vq->mem_ops = &vb2_vmalloc_memops;
+		vq->buf_struct_size = sizeof(struct mcam_vb_buffer);
+		vq->io_modes = VB2_MMAP;
+		cam->dma_setup = mcam_ctlr_dma_vmalloc;
+		cam->frame_complete = mcam_vmalloc_done;
+#endif
+		break;
+	}
+	return vb2_queue_init(vq);
+}
+
+static void mcam_cleanup_vb2(struct mcam_camera *cam)
+{
+	vb2_queue_release(&cam->vb_queue);
+#ifdef MCAM_MODE_DMA_CONTIG
+	if (cam->buffer_mode == B_DMA_contig)
+		vb2_dma_contig_cleanup_ctx(cam->vb_alloc_ctx);
+#endif
+}
+
+
+/* ---------------------------------------------------------------------- */
+/*
+ * The long list of V4L2 ioctl() operations.
+ */
+
+static int mcam_vidioc_streamon(struct file *filp, void *priv,
+		enum v4l2_buf_type type)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_streamon(&cam->vb_queue, type);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_streamoff(struct file *filp, void *priv,
+		enum v4l2_buf_type type)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_streamoff(&cam->vb_queue, type);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_reqbufs(struct file *filp, void *priv,
+		struct v4l2_requestbuffers *req)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_reqbufs(&cam->vb_queue, req);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_querybuf(struct file *filp, void *priv,
+		struct v4l2_buffer *buf)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_querybuf(&cam->vb_queue, buf);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+static int mcam_vidioc_qbuf(struct file *filp, void *priv,
+		struct v4l2_buffer *buf)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_qbuf(&cam->vb_queue, buf);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+static int mcam_vidioc_dqbuf(struct file *filp, void *priv,
+		struct v4l2_buffer *buf)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_dqbuf(&cam->vb_queue, buf, filp->f_flags & O_NONBLOCK);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+
+static int mcam_vidioc_queryctrl(struct file *filp, void *priv,
+		struct v4l2_queryctrl *qc)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, core, queryctrl, qc);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_g_ctrl(struct file *filp, void *priv,
+		struct v4l2_control *ctrl)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, core, g_ctrl, ctrl);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_s_ctrl(struct file *filp, void *priv,
+		struct v4l2_control *ctrl)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, core, s_ctrl, ctrl);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_querycap(struct file *file, void *priv,
+		struct v4l2_capability *cap)
+{
+	strcpy(cap->driver, "marvell_ccic");
+	strcpy(cap->card, "marvell_ccic");
+	cap->version = 1;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
+		V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
+	return 0;
+}
+
+
+static int mcam_vidioc_enum_fmt_vid_cap(struct file *filp,
+		void *priv, struct v4l2_fmtdesc *fmt)
+{
+	if (fmt->index >= N_MCAM_FMTS)
+		return -EINVAL;
+	strlcpy(fmt->description, mcam_formats[fmt->index].desc,
+			sizeof(fmt->description));
+	fmt->pixelformat = mcam_formats[fmt->index].pixelformat;
+	return 0;
+}
+
+static int mcam_vidioc_try_fmt_vid_cap(struct file *filp, void *priv,
+		struct v4l2_format *fmt)
+{
+	struct mcam_camera *cam = priv;
+	struct mcam_format_struct *f;
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	struct v4l2_mbus_framefmt mbus_fmt;
+	int ret;
+
+	f = mcam_find_format(pix->pixelformat);
+	pix->pixelformat = f->pixelformat;
+	v4l2_fill_mbus_format(&mbus_fmt, pix, f->mbus_code);
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, video, try_mbus_fmt, &mbus_fmt);
+	mutex_unlock(&cam->s_mutex);
+	v4l2_fill_pix_format(pix, &mbus_fmt);
+	pix->bytesperline = pix->width * f->bpp;
+	pix->sizeimage = pix->height * pix->bytesperline;
+	return ret;
+}
+
+static int mcam_vidioc_s_fmt_vid_cap(struct file *filp, void *priv,
+		struct v4l2_format *fmt)
+{
+	struct mcam_camera *cam = priv;
+	struct mcam_format_struct *f;
+	int ret;
+
+	/*
+	 * Can't do anything if the device is not idle
+	 * Also can't if there are streaming buffers in place.
+	 */
+	if (cam->state != S_IDLE || cam->vb_queue.num_buffers > 0)
+		return -EBUSY;
+
+	f = mcam_find_format(fmt->fmt.pix.pixelformat);
+
+	/*
+	 * See if the formatting works in principle.
+	 */
+	ret = mcam_vidioc_try_fmt_vid_cap(filp, priv, fmt);
+	if (ret)
+		return ret;
+	/*
+	 * Now we start to change things for real, so let's do it
+	 * under lock.
+	 */
+	mutex_lock(&cam->s_mutex);
+	cam->pix_format = fmt->fmt.pix;
+	cam->mbus_code = f->mbus_code;
+
+	/*
+	 * Make sure we have appropriate DMA buffers.
+	 */
+	if (cam->buffer_mode == B_vmalloc) {
+		ret = mcam_check_dma_buffers(cam);
+		if (ret)
+			goto out;
+	}
+	mcam_set_config_needed(cam, 1);
+	ret = 0;
+out:
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+/*
+ * Return our stored notion of how the camera is/should be configured.
+ * The V4l2 spec wants us to be smarter, and actually get this from
+ * the camera (and not mess with it at open time).  Someday.
+ */
+static int mcam_vidioc_g_fmt_vid_cap(struct file *filp, void *priv,
+		struct v4l2_format *f)
+{
+	struct mcam_camera *cam = priv;
+
+	f->fmt.pix = cam->pix_format;
+	return 0;
+}
+
+/*
+ * We only have one input - the sensor - so minimize the nonsense here.
+ */
+static int mcam_vidioc_enum_input(struct file *filp, void *priv,
+		struct v4l2_input *input)
+{
+	if (input->index != 0)
+		return -EINVAL;
+
+	input->type = V4L2_INPUT_TYPE_CAMERA;
+	input->std = V4L2_STD_ALL; /* Not sure what should go here */
+	strcpy(input->name, "Camera");
+	return 0;
+}
+
+static int mcam_vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
+{
+	*i = 0;
+	return 0;
+}
+
+static int mcam_vidioc_s_input(struct file *filp, void *priv, unsigned int i)
+{
+	if (i != 0)
+		return -EINVAL;
+	return 0;
+}
+
+/* from vivi.c */
+static int mcam_vidioc_s_std(struct file *filp, void *priv, v4l2_std_id *a)
+{
+	return 0;
+}
+
+/*
+ * G/S_PARM.  Most of this is done by the sensor, but we are
+ * the level which controls the number of read buffers.
+ */
+static int mcam_vidioc_g_parm(struct file *filp, void *priv,
+		struct v4l2_streamparm *parms)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, video, g_parm, parms);
+	mutex_unlock(&cam->s_mutex);
+	parms->parm.capture.readbuffers = n_dma_bufs;
+	return ret;
+}
+
+static int mcam_vidioc_s_parm(struct file *filp, void *priv,
+		struct v4l2_streamparm *parms)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, video, s_parm, parms);
+	mutex_unlock(&cam->s_mutex);
+	parms->parm.capture.readbuffers = n_dma_bufs;
+	return ret;
+}
+
+static int mcam_vidioc_g_chip_ident(struct file *file, void *priv,
+		struct v4l2_dbg_chip_ident *chip)
+{
+	struct mcam_camera *cam = priv;
+
+	chip->ident = V4L2_IDENT_NONE;
+	chip->revision = 0;
+	if (v4l2_chip_match_host(&chip->match)) {
+		chip->ident = cam->chip_id;
+		return 0;
+	}
+	return sensor_call(cam, core, g_chip_ident, chip);
+}
+
+static int mcam_vidioc_enum_framesizes(struct file *filp, void *priv,
+		struct v4l2_frmsizeenum *sizes)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, video, enum_framesizes, sizes);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+static int mcam_vidioc_enum_frameintervals(struct file *filp, void *priv,
+		struct v4l2_frmivalenum *interval)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, video, enum_frameintervals, interval);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int mcam_vidioc_g_register(struct file *file, void *priv,
+		struct v4l2_dbg_register *reg)
+{
+	struct mcam_camera *cam = priv;
+
+	if (v4l2_chip_match_host(&reg->match)) {
+		reg->val = mcam_reg_read(cam, reg->reg);
+		reg->size = 4;
+		return 0;
+	}
+	return sensor_call(cam, core, g_register, reg);
+}
+
+static int mcam_vidioc_s_register(struct file *file, void *priv,
+		struct v4l2_dbg_register *reg)
+{
+	struct mcam_camera *cam = priv;
+
+	if (v4l2_chip_match_host(&reg->match)) {
+		mcam_reg_write(cam, reg->reg, reg->val);
+		return 0;
+	}
+	return sensor_call(cam, core, s_register, reg);
+}
+#endif
+
+static const struct v4l2_ioctl_ops mcam_v4l_ioctl_ops = {
+	.vidioc_querycap	= mcam_vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap = mcam_vidioc_enum_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap	= mcam_vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap	= mcam_vidioc_s_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap	= mcam_vidioc_g_fmt_vid_cap,
+	.vidioc_enum_input	= mcam_vidioc_enum_input,
+	.vidioc_g_input		= mcam_vidioc_g_input,
+	.vidioc_s_input		= mcam_vidioc_s_input,
+	.vidioc_s_std		= mcam_vidioc_s_std,
+	.vidioc_reqbufs		= mcam_vidioc_reqbufs,
+	.vidioc_querybuf	= mcam_vidioc_querybuf,
+	.vidioc_qbuf		= mcam_vidioc_qbuf,
+	.vidioc_dqbuf		= mcam_vidioc_dqbuf,
+	.vidioc_streamon	= mcam_vidioc_streamon,
+	.vidioc_streamoff	= mcam_vidioc_streamoff,
+	.vidioc_queryctrl	= mcam_vidioc_queryctrl,
+	.vidioc_g_ctrl		= mcam_vidioc_g_ctrl,
+	.vidioc_s_ctrl		= mcam_vidioc_s_ctrl,
+	.vidioc_g_parm		= mcam_vidioc_g_parm,
+	.vidioc_s_parm		= mcam_vidioc_s_parm,
+	.vidioc_enum_framesizes = mcam_vidioc_enum_framesizes,
+	.vidioc_enum_frameintervals = mcam_vidioc_enum_frameintervals,
+	.vidioc_g_chip_ident	= mcam_vidioc_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register	= mcam_vidioc_g_register,
+	.vidioc_s_register	= mcam_vidioc_s_register,
+#endif
+};
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Our various file operations.
+ */
+static int mcam_v4l_open(struct file *filp)
+{
+	struct mcam_camera *cam = video_drvdata(filp);
+	int ret = 0;
+
+	filp->private_data = cam;
+
+	frames = singles = delivered = 0;
+	mutex_lock(&cam->s_mutex);
+	if (cam->users == 0) {
+		ret = mcam_setup_vb2(cam);
+		if (ret)
+			goto out;
+		mcam_ctlr_power_up(cam);
+		__mcam_cam_reset(cam);
+		mcam_set_config_needed(cam, 1);
+	}
+	(cam->users)++;
+out:
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_v4l_release(struct file *filp)
+{
+	struct mcam_camera *cam = filp->private_data;
+
+	cam_err(cam, "Release, %d frames, %d singles, %d delivered\n", frames,
+			singles, delivered);
+	mutex_lock(&cam->s_mutex);
+	(cam->users)--;
+	if (filp == cam->owner) {
+		mcam_ctlr_stop_dma(cam);
+		cam->owner = NULL;
+	}
+	if (cam->users == 0) {
+		mcam_cleanup_vb2(cam);
+		mcam_ctlr_power_down(cam);
+		if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read)
+			mcam_free_dma_bufs(cam);
+	}
+	mutex_unlock(&cam->s_mutex);
+	return 0;
+}
+
+static ssize_t mcam_v4l_read(struct file *filp,
+		char __user *buffer, size_t len, loff_t *pos)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_read(&cam->vb_queue, buffer, len, pos,
+			filp->f_flags & O_NONBLOCK);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+
+static unsigned int mcam_v4l_poll(struct file *filp,
+		struct poll_table_struct *pt)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_poll(&cam->vb_queue, filp, pt);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_v4l_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_mmap(&cam->vb_queue, vma);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+
+static const struct v4l2_file_operations mcam_v4l_fops = {
+	.owner = THIS_MODULE,
+	.open = mcam_v4l_open,
+	.release = mcam_v4l_release,
+	.read = mcam_v4l_read,
+	.poll = mcam_v4l_poll,
+	.mmap = mcam_v4l_mmap,
+	.unlocked_ioctl = video_ioctl2,
+};
+
+
+/*
+ * This template device holds all of those v4l2 methods; we
+ * clone it for specific real devices.
+ */
+static struct video_device mcam_v4l_template = {
+	.name = "mcam",
+	.tvnorms = V4L2_STD_NTSC_M,
+	.current_norm = V4L2_STD_NTSC_M,  /* make mplayer happy */
+
+	.fops = &mcam_v4l_fops,
+	.ioctl_ops = &mcam_v4l_ioctl_ops,
+	.release = video_device_release_empty,
+};
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Interrupt handler stuff
+ */
+static void mcam_frame_complete(struct mcam_camera *cam, int frame)
+{
+	/*
+	 * Basic frame housekeeping.
+	 */
+	set_bit(frame, &cam->flags);
+	clear_bit(CF_DMA_ACTIVE, &cam->flags);
+	cam->next_buf = frame;
+	cam->buf_seq[frame] = ++(cam->sequence);
+	frames++;
+	/*
+	 * "This should never happen"
+	 */
+	if (cam->state != S_STREAMING)
+		return;
+	/*
+	 * Process the frame and set up the next one.
+	 */
+	cam->frame_complete(cam, frame);
+}
+
+
+/*
+ * The interrupt handler; this needs to be called from the
+ * platform irq handler with the lock held.
+ */
+int mccic_irq(struct mcam_camera *cam, unsigned int irqs)
+{
+	unsigned int frame, handled = 0;
+
+	mcam_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); /* Clear'em all */
+	/*
+	 * Handle any frame completions.  There really should
+	 * not be more than one of these, or we have fallen
+	 * far behind.
+	 *
+	 * When running in S/G mode, the frame number lacks any
+	 * real meaning - there's only one descriptor array - but
+	 * the controller still picks a different one to signal
+	 * each time.
+	 */
+	for (frame = 0; frame < cam->nbufs; frame++)
+		if (irqs & (IRQ_EOF0 << frame)) {
+			mcam_frame_complete(cam, frame);
+			handled = 1;
+		}
+	/*
+	 * If a frame starts, note that we have DMA active.  This
+	 * code assumes that we won't get multiple frame interrupts
+	 * at once; may want to rethink that.
+	 */
+	if (irqs & (IRQ_SOF0 | IRQ_SOF1 | IRQ_SOF2)) {
+		set_bit(CF_DMA_ACTIVE, &cam->flags);
+		handled = 1;
+		if (cam->buffer_mode == B_DMA_sg)
+			mcam_ctlr_stop(cam);
+	}
+	return handled;
+}
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Registration and such.
+ */
+static struct ov7670_config sensor_cfg = {
+	/*
+	 * Exclude QCIF mode, because it only captures a tiny portion
+	 * of the sensor FOV
+	 */
+	.min_width = 320,
+	.min_height = 240,
+};
+
+
+int mccic_register(struct mcam_camera *cam)
+{
+	struct i2c_board_info ov7670_info = {
+		.type = "ov7670",
+		.addr = 0x42 >> 1,
+		.platform_data = &sensor_cfg,
+	};
+	int ret;
+
+	/*
+	 * Validate the requested buffer mode.
+	 */
+	if (buffer_mode >= 0)
+		cam->buffer_mode = buffer_mode;
+	if (cam->buffer_mode == B_DMA_sg &&
+			cam->chip_id == V4L2_IDENT_CAFE) {
+		printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, "
+			"attempting vmalloc mode instead\n");
+		cam->buffer_mode = B_vmalloc;
+	}
+	if (!mcam_buffer_mode_supported(cam->buffer_mode)) {
+		printk(KERN_ERR "marvell-cam: buffer mode %d unsupported\n",
+				cam->buffer_mode);
+		return -EINVAL;
+	}
+	/*
+	 * Register with V4L
+	 */
+	ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
+	if (ret)
+		return ret;
+
+	mutex_init(&cam->s_mutex);
+	cam->state = S_NOTREADY;
+	mcam_set_config_needed(cam, 1);
+	cam->pix_format = mcam_def_pix_format;
+	cam->mbus_code = mcam_def_mbus_code;
+	INIT_LIST_HEAD(&cam->buffers);
+	mcam_ctlr_init(cam);
+
+	/*
+	 * Try to find the sensor.
+	 */
+	sensor_cfg.clock_speed = cam->clock_speed;
+	sensor_cfg.use_smbus = cam->use_smbus;
+	cam->sensor_addr = ov7670_info.addr;
+	cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev,
+			cam->i2c_adapter, &ov7670_info, NULL);
+	if (cam->sensor == NULL) {
+		ret = -ENODEV;
+		goto out_unregister;
+	}
+
+	ret = mcam_cam_init(cam);
+	if (ret)
+		goto out_unregister;
+	/*
+	 * Get the v4l2 setup done.
+	 */
+	mutex_lock(&cam->s_mutex);
+	cam->vdev = mcam_v4l_template;
+	cam->vdev.debug = 0;
+	cam->vdev.v4l2_dev = &cam->v4l2_dev;
+	ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
+	if (ret)
+		goto out;
+	video_set_drvdata(&cam->vdev, cam);
+
+	/*
+	 * If so requested, try to get our DMA buffers now.
+	 */
+	if (cam->buffer_mode == B_vmalloc && !alloc_bufs_at_read) {
+		if (mcam_alloc_dma_bufs(cam, 1))
+			cam_warn(cam, "Unable to alloc DMA buffers at load"
+					" will try again later.");
+	}
+
+out:
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+out_unregister:
+	v4l2_device_unregister(&cam->v4l2_dev);
+	return ret;
+}
+
+
+void mccic_shutdown(struct mcam_camera *cam)
+{
+	/*
+	 * If we have no users (and we really, really should have no
+	 * users) the device will already be powered down.  Trying to
+	 * take it down again will wedge the machine, which is frowned
+	 * upon.
+	 */
+	if (cam->users > 0) {
+		cam_warn(cam, "Removing a device with users!\n");
+		mcam_ctlr_power_down(cam);
+	}
+	vb2_queue_release(&cam->vb_queue);
+	if (cam->buffer_mode == B_vmalloc)
+		mcam_free_dma_bufs(cam);
+	video_unregister_device(&cam->vdev);
+	v4l2_device_unregister(&cam->v4l2_dev);
+}
+
+/*
+ * Power management
+ */
+#ifdef CONFIG_PM
+
+void mccic_suspend(struct mcam_camera *cam)
+{
+	enum mcam_state cstate = cam->state;
+
+	mcam_ctlr_stop_dma(cam);
+	mcam_ctlr_power_down(cam);
+	cam->state = cstate;
+}
+
+int mccic_resume(struct mcam_camera *cam)
+{
+	int ret = 0;
+
+	mutex_lock(&cam->s_mutex);
+	if (cam->users > 0) {
+		mcam_ctlr_power_up(cam);
+		__mcam_cam_reset(cam);
+	} else {
+		mcam_ctlr_power_down(cam);
+	}
+	mutex_unlock(&cam->s_mutex);
+
+	set_bit(CF_CONFIG_NEEDED, &cam->flags);
+	if (cam->state == S_STREAMING)
+		ret = mcam_read_setup(cam);
+	return ret;
+}
+#endif /* CONFIG_PM */
diff --git a/drivers/media/video/marvell-ccic/mcam-core.h b/drivers/media/video/marvell-ccic/mcam-core.h
new file mode 100644
index 0000000..917200e
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/mcam-core.h
@@ -0,0 +1,323 @@
+/*
+ * Marvell camera core structures.
+ *
+ * Copyright 2011 Jonathan Corbet corbet@lwn.net
+ */
+#ifndef _MCAM_CORE_H
+#define _MCAM_CORE_H
+
+#include <linux/list.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf2-core.h>
+
+/*
+ * Create our own symbols for the supported buffer modes, but, for now,
+ * base them entirely on which videobuf2 options have been selected.
+ */
+#if defined(CONFIG_VIDEOBUF2_VMALLOC) || defined(CONFIG_VIDEOBUF2_VMALLOC_MODULE)
+#define MCAM_MODE_VMALLOC 1
+#endif
+
+#if defined(CONFIG_VIDEOBUF2_DMA_CONTIG) || defined(CONFIG_VIDEOBUF2_DMA_CONTIG_MODULE)
+#define MCAM_MODE_DMA_CONTIG 1
+#endif
+
+#if defined(CONFIG_VIDEOBUF2_DMA_SG) || defined(CONFIG_VIDEOBUF2_DMA_SG_MODULE)
+#define MCAM_MODE_DMA_SG 1
+#endif
+
+#if !defined(MCAM_MODE_VMALLOC) && !defined(MCAM_MODE_DMA_CONTIG) && \
+	!defined(MCAM_MODE_DMA_SG)
+#error One of the videobuf buffer modes must be selected in the config
+#endif
+
+
+enum mcam_state {
+	S_NOTREADY,	/* Not yet initialized */
+	S_IDLE,		/* Just hanging around */
+	S_FLAKED,	/* Some sort of problem */
+	S_STREAMING,	/* Streaming data */
+	S_BUFWAIT	/* streaming requested but no buffers yet */
+};
+#define MAX_DMA_BUFS 3
+
+/*
+ * Different platforms work best with different buffer modes, so we
+ * let the platform pick.
+ */
+enum mcam_buffer_mode {
+	B_vmalloc = 0,
+	B_DMA_contig = 1,
+	B_DMA_sg = 2
+};
+
+/*
+ * Is a given buffer mode supported by the current kernel configuration?
+ */
+static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode)
+{
+	switch (mode) {
+#ifdef MCAM_MODE_VMALLOC
+	case B_vmalloc:
+#endif
+#ifdef MCAM_MODE_DMA_CONTIG
+	case B_DMA_contig:
+#endif
+#ifdef MCAM_MODE_DMA_SG
+	case B_DMA_sg:
+#endif
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+
+/*
+ * A description of one of our devices.
+ * Locking: controlled by s_mutex.  Certain fields, however, require
+ *          the dev_lock spinlock; they are marked as such by comments.
+ *          dev_lock is also required for access to device registers.
+ */
+struct mcam_camera {
+	/*
+	 * These fields should be set by the platform code prior to
+	 * calling mcam_register().
+	 */
+	struct i2c_adapter *i2c_adapter;
+	unsigned char __iomem *regs;
+	spinlock_t dev_lock;
+	struct device *dev; /* For messages, dma alloc */
+	unsigned int chip_id;
+	short int clock_speed;	/* Sensor clock speed, default 30 */
+	short int use_smbus;	/* SMBUS or straight I2c? */
+	enum mcam_buffer_mode buffer_mode;
+	/*
+	 * Callbacks from the core to the platform code.
+	 */
+	void (*plat_power_up) (struct mcam_camera *cam);
+	void (*plat_power_down) (struct mcam_camera *cam);
+
+	/*
+	 * Everything below here is private to the mcam core and
+	 * should not be touched by the platform code.
+	 */
+	struct v4l2_device v4l2_dev;
+	enum mcam_state state;
+	unsigned long flags;		/* Buffer status, mainly (dev_lock) */
+	int users;			/* How many open FDs */
+	struct file *owner;		/* Who has data access (v4l2) */
+
+	/*
+	 * Subsystem structures.
+	 */
+	struct video_device vdev;
+	struct v4l2_subdev *sensor;
+	unsigned short sensor_addr;
+
+	/* Videobuf2 stuff */
+	struct vb2_queue vb_queue;
+	struct list_head buffers;	/* Available frames */
+
+	unsigned int nbufs;		/* How many are alloc'd */
+	int next_buf;			/* Next to consume (dev_lock) */
+
+	/* DMA buffers - vmalloc mode */
+#ifdef MCAM_MODE_VMALLOC
+	unsigned int dma_buf_size;	/* allocated size */
+	void *dma_bufs[MAX_DMA_BUFS];	/* Internal buffer addresses */
+	dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */
+	struct tasklet_struct s_tasklet;
+#endif
+	unsigned int sequence;		/* Frame sequence number */
+	unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual bufs */
+
+	/* DMA buffers - DMA modes */
+	struct mcam_vb_buffer *vb_bufs[MAX_DMA_BUFS];
+	struct vb2_alloc_ctx *vb_alloc_ctx;
+
+	/* Mode-specific ops, set at open time */
+	void (*dma_setup)(struct mcam_camera *cam);
+	void (*frame_complete)(struct mcam_camera *cam, int frame);
+
+	/* Current operating parameters */
+	u32 sensor_type;		/* Currently ov7670 only */
+	struct v4l2_pix_format pix_format;
+	enum v4l2_mbus_pixelcode mbus_code;
+
+	/* Locks */
+	struct mutex s_mutex; /* Access to this structure */
+};
+
+
+/*
+ * Register I/O functions.  These are here because the platform code
+ * may legitimately need to mess with the register space.
+ */
+/*
+ * Device register I/O
+ */
+static inline void mcam_reg_write(struct mcam_camera *cam, unsigned int reg,
+		unsigned int val)
+{
+	iowrite32(val, cam->regs + reg);
+}
+
+static inline unsigned int mcam_reg_read(struct mcam_camera *cam,
+		unsigned int reg)
+{
+	return ioread32(cam->regs + reg);
+}
+
+
+static inline void mcam_reg_write_mask(struct mcam_camera *cam, unsigned int reg,
+		unsigned int val, unsigned int mask)
+{
+	unsigned int v = mcam_reg_read(cam, reg);
+
+	v = (v & ~mask) | (val & mask);
+	mcam_reg_write(cam, reg, v);
+}
+
+static inline void mcam_reg_clear_bit(struct mcam_camera *cam,
+		unsigned int reg, unsigned int val)
+{
+	mcam_reg_write_mask(cam, reg, 0, val);
+}
+
+static inline void mcam_reg_set_bit(struct mcam_camera *cam,
+		unsigned int reg, unsigned int val)
+{
+	mcam_reg_write_mask(cam, reg, val, val);
+}
+
+/*
+ * Functions for use by platform code.
+ */
+int mccic_register(struct mcam_camera *cam);
+int mccic_irq(struct mcam_camera *cam, unsigned int irqs);
+void mccic_shutdown(struct mcam_camera *cam);
+#ifdef CONFIG_PM
+void mccic_suspend(struct mcam_camera *cam);
+int mccic_resume(struct mcam_camera *cam);
+#endif
+
+/*
+ * Register definitions for the m88alp01 camera interface.  Offsets in bytes
+ * as given in the spec.
+ */
+#define REG_Y0BAR	0x00
+#define REG_Y1BAR	0x04
+#define REG_Y2BAR	0x08
+/* ... */
+
+#define REG_IMGPITCH	0x24	/* Image pitch register */
+#define   IMGP_YP_SHFT	  2		/* Y pitch params */
+#define   IMGP_YP_MASK	  0x00003ffc	/* Y pitch field */
+#define	  IMGP_UVP_SHFT	  18		/* UV pitch (planar) */
+#define   IMGP_UVP_MASK   0x3ffc0000
+#define REG_IRQSTATRAW	0x28	/* RAW IRQ Status */
+#define   IRQ_EOF0	  0x00000001	/* End of frame 0 */
+#define   IRQ_EOF1	  0x00000002	/* End of frame 1 */
+#define   IRQ_EOF2	  0x00000004	/* End of frame 2 */
+#define   IRQ_SOF0	  0x00000008	/* Start of frame 0 */
+#define   IRQ_SOF1	  0x00000010	/* Start of frame 1 */
+#define   IRQ_SOF2	  0x00000020	/* Start of frame 2 */
+#define   IRQ_OVERFLOW	  0x00000040	/* FIFO overflow */
+#define   IRQ_TWSIW	  0x00010000	/* TWSI (smbus) write */
+#define   IRQ_TWSIR	  0x00020000	/* TWSI read */
+#define   IRQ_TWSIE	  0x00040000	/* TWSI error */
+#define   TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE)
+#define   FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2)
+#define   ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW)
+#define REG_IRQMASK	0x2c	/* IRQ mask - same bits as IRQSTAT */
+#define REG_IRQSTAT	0x30	/* IRQ status / clear */
+
+#define REG_IMGSIZE	0x34	/* Image size */
+#define  IMGSZ_V_MASK	  0x1fff0000
+#define  IMGSZ_V_SHIFT	  16
+#define	 IMGSZ_H_MASK	  0x00003fff
+#define REG_IMGOFFSET	0x38	/* IMage offset */
+
+#define REG_CTRL0	0x3c	/* Control 0 */
+#define   C0_ENABLE	  0x00000001	/* Makes the whole thing go */
+
+/* Mask for all the format bits */
+#define   C0_DF_MASK	  0x00fffffc    /* Bits 2-23 */
+
+/* RGB ordering */
+#define	  C0_RGB4_RGBX	  0x00000000
+#define	  C0_RGB4_XRGB	  0x00000004
+#define	  C0_RGB4_BGRX	  0x00000008
+#define	  C0_RGB4_XBGR	  0x0000000c
+#define	  C0_RGB5_RGGB	  0x00000000
+#define	  C0_RGB5_GRBG	  0x00000004
+#define	  C0_RGB5_GBRG	  0x00000008
+#define	  C0_RGB5_BGGR	  0x0000000c
+
+/* Spec has two fields for DIN and DOUT, but they must match, so
+   combine them here. */
+#define	  C0_DF_YUV	  0x00000000	/* Data is YUV	    */
+#define	  C0_DF_RGB	  0x000000a0	/* ... RGB		    */
+#define	  C0_DF_BAYER	  0x00000140	/* ... Bayer		    */
+/* 8-8-8 must be missing from the below - ask */
+#define	  C0_RGBF_565	  0x00000000
+#define	  C0_RGBF_444	  0x00000800
+#define	  C0_RGB_BGR	  0x00001000	/* Blue comes first */
+#define	  C0_YUV_PLANAR	  0x00000000	/* YUV 422 planar format */
+#define	  C0_YUV_PACKED	  0x00008000	/* YUV 422 packed	*/
+#define	  C0_YUV_420PL	  0x0000a000	/* YUV 420 planar	*/
+/* Think that 420 packed must be 111 - ask */
+#define	  C0_YUVE_YUYV	  0x00000000	/* Y1CbY0Cr		*/
+#define	  C0_YUVE_YVYU	  0x00010000	/* Y1CrY0Cb		*/
+#define	  C0_YUVE_VYUY	  0x00020000	/* CrY1CbY0		*/
+#define	  C0_YUVE_UYVY	  0x00030000	/* CbY1CrY0		*/
+#define	  C0_YUVE_XYUV	  0x00000000	/* 420: .YUV		*/
+#define	  C0_YUVE_XYVU	  0x00010000	/* 420: .YVU		*/
+#define	  C0_YUVE_XUVY	  0x00020000	/* 420: .UVY		*/
+#define	  C0_YUVE_XVUY	  0x00030000	/* 420: .VUY		*/
+/* Bayer bits 18,19 if needed */
+#define	  C0_HPOL_LOW	  0x01000000	/* HSYNC polarity active low */
+#define	  C0_VPOL_LOW	  0x02000000	/* VSYNC polarity active low */
+#define	  C0_VCLK_LOW	  0x04000000	/* VCLK on falling edge */
+#define	  C0_DOWNSCALE	  0x08000000	/* Enable downscaler */
+#define	  C0_SIFM_MASK	  0xc0000000	/* SIF mode bits */
+#define	  C0_SIF_HVSYNC	  0x00000000	/* Use H/VSYNC */
+#define	  CO_SOF_NOSYNC	  0x40000000	/* Use inband active signaling */
+
+/* Bits below C1_444ALPHA are not present in Cafe */
+#define REG_CTRL1	0x40	/* Control 1 */
+#define	  C1_CLKGATE	  0x00000001	/* Sensor clock gate */
+#define   C1_DESC_ENA	  0x00000100	/* DMA descriptor enable */
+#define   C1_DESC_3WORD   0x00000200	/* Three-word descriptors used */
+#define	  C1_444ALPHA	  0x00f00000	/* Alpha field in RGB444 */
+#define	  C1_ALPHA_SHFT	  20
+#define	  C1_DMAB32	  0x00000000	/* 32-byte DMA burst */
+#define	  C1_DMAB16	  0x02000000	/* 16-byte DMA burst */
+#define	  C1_DMAB64	  0x04000000	/* 64-byte DMA burst */
+#define	  C1_DMAB_MASK	  0x06000000
+#define	  C1_TWOBUFS	  0x08000000	/* Use only two DMA buffers */
+#define	  C1_PWRDWN	  0x10000000	/* Power down */
+
+#define REG_CLKCTRL	0x88	/* Clock control */
+#define	  CLK_DIV_MASK	  0x0000ffff	/* Upper bits RW "reserved" */
+
+/* This appears to be a Cafe-only register */
+#define REG_UBAR	0xc4	/* Upper base address register */
+
+/* Armada 610 DMA descriptor registers */
+#define	REG_DMA_DESC_Y	0x200
+#define	REG_DMA_DESC_U	0x204
+#define	REG_DMA_DESC_V	0x208
+#define REG_DESC_LEN_Y	0x20c	/* Lengths are in bytes */
+#define	REG_DESC_LEN_U	0x210
+#define REG_DESC_LEN_V	0x214
+
+/*
+ * Useful stuff that probably belongs somewhere global.
+ */
+#define VGA_WIDTH	640
+#define VGA_HEIGHT	480
+
+#endif /* _MCAM_CORE_H */
diff --git a/drivers/media/video/marvell-ccic/mmp-driver.c b/drivers/media/video/marvell-ccic/mmp-driver.c
new file mode 100644
index 0000000..d6b7645
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/mmp-driver.c
@@ -0,0 +1,340 @@
+/*
+ * Support for the camera device found on Marvell MMP processors; known
+ * to work with the Armada 610 as used in the OLPC 1.75 system.
+ *
+ * Copyright 2011 Jonathan Corbet <corbet@lwn.net>
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License, version 2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/mmp-camera.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+
+#include "mcam-core.h"
+
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
+MODULE_LICENSE("GPL");
+
+struct mmp_camera {
+	void *power_regs;
+	struct platform_device *pdev;
+	struct mcam_camera mcam;
+	struct list_head devlist;
+	int irq;
+};
+
+static inline struct mmp_camera *mcam_to_cam(struct mcam_camera *mcam)
+{
+	return container_of(mcam, struct mmp_camera, mcam);
+}
+
+/*
+ * A silly little infrastructure so we can keep track of our devices.
+ * Chances are that we will never have more than one of them, but
+ * the Armada 610 *does* have two controllers...
+ */
+
+static LIST_HEAD(mmpcam_devices);
+static struct mutex mmpcam_devices_lock;
+
+static void mmpcam_add_device(struct mmp_camera *cam)
+{
+	mutex_lock(&mmpcam_devices_lock);
+	list_add(&cam->devlist, &mmpcam_devices);
+	mutex_unlock(&mmpcam_devices_lock);
+}
+
+static void mmpcam_remove_device(struct mmp_camera *cam)
+{
+	mutex_lock(&mmpcam_devices_lock);
+	list_del(&cam->devlist);
+	mutex_unlock(&mmpcam_devices_lock);
+}
+
+/*
+ * Platform dev remove passes us a platform_device, and there's
+ * no handy unused drvdata to stash a backpointer in.  So just
+ * dig it out of our list.
+ */
+static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev)
+{
+	struct mmp_camera *cam;
+
+	mutex_lock(&mmpcam_devices_lock);
+	list_for_each_entry(cam, &mmpcam_devices, devlist) {
+		if (cam->pdev == pdev) {
+			mutex_unlock(&mmpcam_devices_lock);
+			return cam;
+		}
+	}
+	mutex_unlock(&mmpcam_devices_lock);
+	return NULL;
+}
+
+
+
+
+/*
+ * Power-related registers; this almost certainly belongs
+ * somewhere else.
+ *
+ * ARMADA 610 register manual, sec 7.2.1, p1842.
+ */
+#define CPU_SUBSYS_PMU_BASE	0xd4282800
+#define REG_CCIC_DCGCR		0x28	/* CCIC dyn clock gate ctrl reg */
+#define REG_CCIC_CRCR		0x50	/* CCIC clk reset ctrl reg	*/
+
+/*
+ * Power control.
+ */
+static void mmpcam_power_up(struct mcam_camera *mcam)
+{
+	struct mmp_camera *cam = mcam_to_cam(mcam);
+	struct mmp_camera_platform_data *pdata;
+/*
+ * Turn on power and clocks to the controller.
+ */
+	iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR);
+	iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR);
+	mdelay(1);
+/*
+ * Provide power to the sensor.
+ */
+	mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002);
+	pdata = cam->pdev->dev.platform_data;
+	gpio_set_value(pdata->sensor_power_gpio, 1);
+	mdelay(5);
+	mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000);
+	gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */
+	mdelay(5);
+	gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */
+	mdelay(5);
+}
+
+static void mmpcam_power_down(struct mcam_camera *mcam)
+{
+	struct mmp_camera *cam = mcam_to_cam(mcam);
+	struct mmp_camera_platform_data *pdata;
+/*
+ * Turn off clocks and set reset lines
+ */
+	iowrite32(0, cam->power_regs + REG_CCIC_DCGCR);
+	iowrite32(0, cam->power_regs + REG_CCIC_CRCR);
+/*
+ * Shut down the sensor.
+ */
+	pdata = cam->pdev->dev.platform_data;
+	gpio_set_value(pdata->sensor_power_gpio, 0);
+	gpio_set_value(pdata->sensor_reset_gpio, 0);
+}
+
+
+static irqreturn_t mmpcam_irq(int irq, void *data)
+{
+	struct mcam_camera *mcam = data;
+	unsigned int irqs, handled;
+
+	spin_lock(&mcam->dev_lock);
+	irqs = mcam_reg_read(mcam, REG_IRQSTAT);
+	handled = mccic_irq(mcam, irqs);
+	spin_unlock(&mcam->dev_lock);
+	return IRQ_RETVAL(handled);
+}
+
+
+static int mmpcam_probe(struct platform_device *pdev)
+{
+	struct mmp_camera *cam;
+	struct mcam_camera *mcam;
+	struct resource *res;
+	struct mmp_camera_platform_data *pdata;
+	int ret;
+
+	cam = kzalloc(sizeof(*cam), GFP_KERNEL);
+	if (cam == NULL)
+		return -ENOMEM;
+	cam->pdev = pdev;
+	INIT_LIST_HEAD(&cam->devlist);
+
+	mcam = &cam->mcam;
+	mcam->platform = MHP_Armada610;
+	mcam->plat_power_up = mmpcam_power_up;
+	mcam->plat_power_down = mmpcam_power_down;
+	mcam->dev = &pdev->dev;
+	mcam->use_smbus = 0;
+	mcam->chip_id = V4L2_IDENT_ARMADA610;
+	mcam->buffer_mode = B_DMA_sg;
+	spin_lock_init(&mcam->dev_lock);
+	/*
+	 * Get our I/O memory.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no iomem resource!\n");
+		ret = -ENODEV;
+		goto out_free;
+	}
+	mcam->regs = ioremap(res->start, resource_size(res));
+	if (mcam->regs == NULL) {
+		dev_err(&pdev->dev, "MMIO ioremap fail\n");
+		ret = -ENODEV;
+		goto out_free;
+	}
+	/*
+	 * Power/clock memory is elsewhere; get it too.  Perhaps this
+	 * should really be managed outside of this driver?
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no power resource!\n");
+		ret = -ENODEV;
+		goto out_unmap1;
+	}
+	cam->power_regs = ioremap(res->start, resource_size(res));
+	if (cam->power_regs == NULL) {
+		dev_err(&pdev->dev, "power MMIO ioremap fail\n");
+		ret = -ENODEV;
+		goto out_unmap1;
+	}
+	/*
+	 * Find the i2c adapter.  This assumes, of course, that the
+	 * i2c bus is already up and functioning.
+	 */
+	pdata = pdev->dev.platform_data;
+	mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device);
+	if (mcam->i2c_adapter == NULL) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "No i2c adapter\n");
+		goto out_unmap2;
+	}
+	/*
+	 * Sensor GPIO pins.
+	 */
+	ret = gpio_request(pdata->sensor_power_gpio, "cam-power");
+	if (ret) {
+		dev_err(&pdev->dev, "Can't get sensor power gpio %d",
+				pdata->sensor_power_gpio);
+		goto out_unmap2;
+	}
+	gpio_direction_output(pdata->sensor_power_gpio, 0);
+	ret = gpio_request(pdata->sensor_reset_gpio, "cam-reset");
+	if (ret) {
+		dev_err(&pdev->dev, "Can't get sensor reset gpio %d",
+				pdata->sensor_reset_gpio);
+		goto out_gpio;
+	}
+	gpio_direction_output(pdata->sensor_reset_gpio, 0);
+	/*
+	 * Power the device up and hand it off to the core.
+	 */
+	mmpcam_power_up(mcam);
+	ret = mccic_register(mcam);
+	if (ret)
+		goto out_gpio2;
+	/*
+	 * Finally, set up our IRQ now that the core is ready to
+	 * deal with it.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		ret = -ENODEV;
+		goto out_unregister;
+	}
+	cam->irq = res->start;
+	ret = request_irq(cam->irq, mmpcam_irq, IRQF_SHARED,
+			"mmp-camera", mcam);
+	if (ret == 0) {
+		mmpcam_add_device(cam);
+		return 0;
+	}
+
+out_unregister:
+	mccic_shutdown(mcam);
+out_gpio2:
+	mmpcam_power_down(mcam);
+	gpio_free(pdata->sensor_reset_gpio);
+out_gpio:
+	gpio_free(pdata->sensor_power_gpio);
+out_unmap2:
+	iounmap(cam->power_regs);
+out_unmap1:
+	iounmap(mcam->regs);
+out_free:
+	kfree(cam);
+	return ret;
+}
+
+
+static int mmpcam_remove(struct mmp_camera *cam)
+{
+	struct mcam_camera *mcam = &cam->mcam;
+	struct mmp_camera_platform_data *pdata;
+
+	mmpcam_remove_device(cam);
+	free_irq(cam->irq, mcam);
+	mccic_shutdown(mcam);
+	mmpcam_power_down(mcam);
+	pdata = cam->pdev->dev.platform_data;
+	gpio_free(pdata->sensor_reset_gpio);
+	gpio_free(pdata->sensor_power_gpio);
+	iounmap(cam->power_regs);
+	iounmap(mcam->regs);
+	kfree(cam);
+	return 0;
+}
+
+static int mmpcam_platform_remove(struct platform_device *pdev)
+{
+	struct mmp_camera *cam = mmpcam_find_device(pdev);
+
+	if (cam == NULL)
+		return -ENODEV;
+	return mmpcam_remove(cam);
+}
+
+
+static struct platform_driver mmpcam_driver = {
+	.probe		= mmpcam_probe,
+	.remove		= mmpcam_platform_remove,
+	.driver = {
+		.name	= "mmp-camera",
+		.owner	= THIS_MODULE
+	}
+};
+
+
+static int __init mmpcam_init_module(void)
+{
+	mutex_init(&mmpcam_devices_lock);
+	return platform_driver_register(&mmpcam_driver);
+}
+
+static void __exit mmpcam_exit_module(void)
+{
+	platform_driver_unregister(&mmpcam_driver);
+	/*
+	 * platform_driver_unregister() should have emptied the list
+	 */
+	if (!list_empty(&mmpcam_devices))
+		printk(KERN_ERR "mmp_camera leaving devices behind\n");
+}
+
+module_init(mmpcam_init_module);
+module_exit(mmpcam_exit_module);
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index b03d74e..166bf93 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -19,7 +19,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/fs.h>
-#include <linux/version.h>
 #include <linux/timer.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -35,7 +34,7 @@
 MODULE_DESCRIPTION("Virtual device for mem2mem framework testing");
 MODULE_AUTHOR("Pawel Osciak, <pawel@osciak.com>");
 MODULE_LICENSE("GPL");
-
+MODULE_VERSION("0.1.1");
 
 #define MIN_W 32
 #define MIN_H 32
@@ -380,7 +379,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1);
 	strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1);
 	cap->bus_info[0] = 0;
-	cap->version = KERNEL_VERSION(0, 1, 0);
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT
 			  | V4L2_CAP_STREAMING;
 
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index e2bbd8c..4da9cca 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -603,13 +603,9 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 	unsigned long flags;
 	int ret;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/* Enable the chip */
 	data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
@@ -675,8 +671,8 @@ static void mt9m001_video_remove(struct soc_camera_device *icd)
 {
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	dev_dbg(&icd->dev, "Video removed: %p, %p\n",
-		icd->dev.parent, icd->vdev);
+	dev_dbg(icd->pdev, "Video removed: %p, %p\n",
+		icd->parent, icd->vdev);
 	if (icl->free_bus)
 		icl->free_bus(icl);
 }
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index ebebed9..a357aa8 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -63,6 +63,12 @@
 #define MT9M111_RESET_RESTART_FRAME	(1 << 1)
 #define MT9M111_RESET_RESET_MODE	(1 << 0)
 
+#define MT9M111_RM_FULL_POWER_RD	(0 << 10)
+#define MT9M111_RM_LOW_POWER_RD		(1 << 10)
+#define MT9M111_RM_COL_SKIP_4X		(1 << 5)
+#define MT9M111_RM_ROW_SKIP_4X		(1 << 4)
+#define MT9M111_RM_COL_SKIP_2X		(1 << 3)
+#define MT9M111_RM_ROW_SKIP_2X		(1 << 2)
 #define MT9M111_RMB_MIRROR_COLS		(1 << 1)
 #define MT9M111_RMB_MIRROR_ROWS		(1 << 0)
 #define MT9M111_CTXT_CTRL_RESTART	(1 << 15)
@@ -95,7 +101,8 @@
 
 #define MT9M111_OPMODE_AUTOEXPO_EN	(1 << 14)
 #define MT9M111_OPMODE_AUTOWHITEBAL_EN	(1 << 1)
-
+#define MT9M111_OUTFMT_FLIP_BAYER_COL	(1 << 9)
+#define MT9M111_OUTFMT_FLIP_BAYER_ROW	(1 << 8)
 #define MT9M111_OUTFMT_PROCESSED_BAYER	(1 << 14)
 #define MT9M111_OUTFMT_BYPASS_IFP	(1 << 10)
 #define MT9M111_OUTFMT_INV_PIX_CLOCK	(1 << 9)
@@ -110,9 +117,8 @@
 #define MT9M111_OUTFMT_TST_RAMP_FRAME	(3 << 4)
 #define MT9M111_OUTFMT_SHIFT_3_UP	(1 << 3)
 #define MT9M111_OUTFMT_AVG_CHROMA	(1 << 2)
-#define MT9M111_OUTFMT_SWAP_YCbCr_C_Y	(1 << 1)
-#define MT9M111_OUTFMT_SWAP_RGB_EVEN	(1 << 1)
-#define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr	(1 << 0)
+#define MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN	(1 << 1)
+#define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B	(1 << 0)
 
 /*
  * Camera control register addresses (0x200..0x2ff not implemented)
@@ -122,6 +128,8 @@
 #define reg_write(reg, val) mt9m111_reg_write(client, MT9M111_##reg, (val))
 #define reg_set(reg, val) mt9m111_reg_set(client, MT9M111_##reg, (val))
 #define reg_clear(reg, val) mt9m111_reg_clear(client, MT9M111_##reg, (val))
+#define reg_mask(reg, val, mask) mt9m111_reg_mask(client, MT9M111_##reg, \
+		(val), (mask))
 
 #define MT9M111_MIN_DARK_ROWS	8
 #define MT9M111_MIN_DARK_COLS	26
@@ -153,7 +161,11 @@ static const struct mt9m111_datafmt mt9m111_colour_fmts[] = {
 	{V4L2_MBUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG},
 	{V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG},
 	{V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB},
+	{V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE, V4L2_COLORSPACE_SRGB},
 	{V4L2_MBUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB},
+	{V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB},
+	{V4L2_MBUS_FMT_BGR565_2X8_LE, V4L2_COLORSPACE_SRGB},
+	{V4L2_MBUS_FMT_BGR565_2X8_BE, V4L2_COLORSPACE_SRGB},
 	{V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB},
 	{V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB},
 };
@@ -169,6 +181,8 @@ struct mt9m111 {
 			 * from v4l2-chip-ident.h */
 	enum mt9m111_context context;
 	struct v4l2_rect rect;
+	struct mutex power_lock; /* lock to protect power_count */
+	int power_count;
 	const struct mt9m111_datafmt *fmt;
 	unsigned int gain;
 	unsigned char autoexposure;
@@ -176,10 +190,6 @@ struct mt9m111 {
 	unsigned int powered:1;
 	unsigned int hflip:1;
 	unsigned int vflip:1;
-	unsigned int swap_rgb_even_odd:1;
-	unsigned int swap_rgb_red_blue:1;
-	unsigned int swap_yuv_y_chromas:1;
-	unsigned int swap_yuv_cb_cr:1;
 	unsigned int autowhitebalance:1;
 };
 
@@ -248,12 +258,26 @@ static int mt9m111_reg_clear(struct i2c_client *client, const u16 reg,
 	int ret;
 
 	ret = mt9m111_reg_read(client, reg);
-	return mt9m111_reg_write(client, reg, ret & ~data);
+	if (ret >= 0)
+		ret = mt9m111_reg_write(client, reg, ret & ~data);
+	return ret;
 }
 
-static int mt9m111_set_context(struct i2c_client *client,
+static int mt9m111_reg_mask(struct i2c_client *client, const u16 reg,
+			    const u16 data, const u16 mask)
+{
+	int ret;
+
+	ret = mt9m111_reg_read(client, reg);
+	if (ret >= 0)
+		ret = mt9m111_reg_write(client, reg, (ret & ~mask) | data);
+	return ret;
+}
+
+static int mt9m111_set_context(struct mt9m111 *mt9m111,
 			       enum mt9m111_context ctxt)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int valB = MT9M111_CTXT_CTRL_RESTART | MT9M111_CTXT_CTRL_DEFECTCOR_B
 		| MT9M111_CTXT_CTRL_RESIZE_B | MT9M111_CTXT_CTRL_CTRL2_B
 		| MT9M111_CTXT_CTRL_GAMMA_B | MT9M111_CTXT_CTRL_READ_MODE_B
@@ -267,10 +291,10 @@ static int mt9m111_set_context(struct i2c_client *client,
 		return reg_write(CONTEXT_CONTROL, valA);
 }
 
-static int mt9m111_setup_rect(struct i2c_client *client,
+static int mt9m111_setup_rect(struct mt9m111 *mt9m111,
 			      struct v4l2_rect *rect)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret, is_raw_format;
 	int width = rect->width;
 	int height = rect->height;
@@ -312,81 +336,9 @@ static int mt9m111_setup_rect(struct i2c_client *client,
 	return ret;
 }
 
-static int mt9m111_setup_pixfmt(struct i2c_client *client, u16 outfmt)
+static int mt9m111_enable(struct mt9m111 *mt9m111)
 {
-	int ret;
-	u16 mask = MT9M111_OUTFMT_PROCESSED_BAYER | MT9M111_OUTFMT_RGB |
-		MT9M111_OUTFMT_BYPASS_IFP | MT9M111_OUTFMT_SWAP_RGB_EVEN |
-		MT9M111_OUTFMT_RGB565 | MT9M111_OUTFMT_RGB555 |
-		MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr |
-		MT9M111_OUTFMT_SWAP_YCbCr_C_Y;
-
-	ret = reg_read(OUTPUT_FORMAT_CTRL2_A);
-	if (ret >= 0)
-		ret = reg_write(OUTPUT_FORMAT_CTRL2_A, (ret & ~mask) | outfmt);
-	if (!ret)
-		ret = reg_read(OUTPUT_FORMAT_CTRL2_B);
-	if (ret >= 0)
-		ret = reg_write(OUTPUT_FORMAT_CTRL2_B, (ret & ~mask) | outfmt);
-
-	return ret;
-}
-
-static int mt9m111_setfmt_bayer8(struct i2c_client *client)
-{
-	return mt9m111_setup_pixfmt(client, MT9M111_OUTFMT_PROCESSED_BAYER |
-				    MT9M111_OUTFMT_RGB);
-}
-
-static int mt9m111_setfmt_bayer10(struct i2c_client *client)
-{
-	return mt9m111_setup_pixfmt(client, MT9M111_OUTFMT_BYPASS_IFP);
-}
-
-static int mt9m111_setfmt_rgb565(struct i2c_client *client)
-{
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-	int val = 0;
-
-	if (mt9m111->swap_rgb_red_blue)
-		val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr;
-	if (mt9m111->swap_rgb_even_odd)
-		val |= MT9M111_OUTFMT_SWAP_RGB_EVEN;
-	val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565;
-
-	return mt9m111_setup_pixfmt(client, val);
-}
-
-static int mt9m111_setfmt_rgb555(struct i2c_client *client)
-{
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-	int val = 0;
-
-	if (mt9m111->swap_rgb_red_blue)
-		val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr;
-	if (mt9m111->swap_rgb_even_odd)
-		val |= MT9M111_OUTFMT_SWAP_RGB_EVEN;
-	val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555;
-
-	return mt9m111_setup_pixfmt(client, val);
-}
-
-static int mt9m111_setfmt_yuv(struct i2c_client *client)
-{
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-	int val = 0;
-
-	if (mt9m111->swap_yuv_cb_cr)
-		val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr;
-	if (mt9m111->swap_yuv_y_chromas)
-		val |= MT9M111_OUTFMT_SWAP_YCbCr_C_Y;
-
-	return mt9m111_setup_pixfmt(client, val);
-}
-
-static int mt9m111_enable(struct i2c_client *client)
-{
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	ret = reg_set(RESET, MT9M111_RESET_CHIP_ENABLE);
@@ -395,8 +347,9 @@ static int mt9m111_enable(struct i2c_client *client)
 	return ret;
 }
 
-static int mt9m111_reset(struct i2c_client *client)
+static int mt9m111_reset(struct mt9m111 *mt9m111)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	ret = reg_set(RESET, MT9M111_RESET_RESET_MODE);
@@ -424,11 +377,9 @@ static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f)
 	return 0;
 }
 
-static int mt9m111_make_rect(struct i2c_client *client,
+static int mt9m111_make_rect(struct mt9m111 *mt9m111,
 			     struct v4l2_rect *rect)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-
 	if (mt9m111->fmt->code == V4L2_MBUS_FMT_SBGGR8_1X8 ||
 	    mt9m111->fmt->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE) {
 		/* Bayer format - even size lengths */
@@ -444,14 +395,14 @@ static int mt9m111_make_rect(struct i2c_client *client,
 	soc_camera_limit_side(&rect->top, &rect->height,
 		     MT9M111_MIN_DARK_ROWS, 2, MT9M111_MAX_HEIGHT);
 
-	return mt9m111_setup_rect(client, rect);
+	return mt9m111_setup_rect(mt9m111, rect);
 }
 
 static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
 	struct v4l2_rect rect = a->c;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 	int ret;
 
 	dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
@@ -460,7 +411,7 @@ static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
-	ret = mt9m111_make_rect(client, &rect);
+	ret = mt9m111_make_rect(mt9m111, &rect);
 	if (!ret)
 		mt9m111->rect = rect;
 	return ret;
@@ -468,8 +419,7 @@ static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 
 static int mt9m111_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 
 	a->c	= mt9m111->rect;
 	a->type	= V4L2_BUF_TYPE_VIDEO_CAPTURE;
@@ -496,8 +446,7 @@ static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 static int mt9m111_g_fmt(struct v4l2_subdev *sd,
 			 struct v4l2_mbus_framefmt *mf)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 
 	mf->width	= mt9m111->rect.width;
 	mf->height	= mt9m111->rect.height;
@@ -508,51 +457,73 @@ static int mt9m111_g_fmt(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int mt9m111_set_pixfmt(struct i2c_client *client,
+static int mt9m111_set_pixfmt(struct mt9m111 *mt9m111,
 			      enum v4l2_mbus_pixelcode code)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
+	u16 data_outfmt2, mask_outfmt2 = MT9M111_OUTFMT_PROCESSED_BAYER |
+		MT9M111_OUTFMT_BYPASS_IFP | MT9M111_OUTFMT_RGB |
+		MT9M111_OUTFMT_RGB565 | MT9M111_OUTFMT_RGB555 |
+		MT9M111_OUTFMT_RGB444x | MT9M111_OUTFMT_RGBx444 |
+		MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN |
+		MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B;
 	int ret;
 
 	switch (code) {
 	case V4L2_MBUS_FMT_SBGGR8_1X8:
-		ret = mt9m111_setfmt_bayer8(client);
+		data_outfmt2 = MT9M111_OUTFMT_PROCESSED_BAYER |
+			MT9M111_OUTFMT_RGB;
 		break;
 	case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE:
-		ret = mt9m111_setfmt_bayer10(client);
+		data_outfmt2 = MT9M111_OUTFMT_BYPASS_IFP | MT9M111_OUTFMT_RGB;
 		break;
 	case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE:
-		ret = mt9m111_setfmt_rgb555(client);
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555 |
+			MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN;
+		break;
+	case V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE:
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555;
 		break;
 	case V4L2_MBUS_FMT_RGB565_2X8_LE:
-		ret = mt9m111_setfmt_rgb565(client);
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 |
+			MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN;
+		break;
+	case V4L2_MBUS_FMT_RGB565_2X8_BE:
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565;
+		break;
+	case V4L2_MBUS_FMT_BGR565_2X8_BE:
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 |
+			MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B;
+		break;
+	case V4L2_MBUS_FMT_BGR565_2X8_LE:
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 |
+			MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN |
+			MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B;
 		break;
 	case V4L2_MBUS_FMT_UYVY8_2X8:
-		mt9m111->swap_yuv_y_chromas = 0;
-		mt9m111->swap_yuv_cb_cr = 0;
-		ret = mt9m111_setfmt_yuv(client);
+		data_outfmt2 = 0;
 		break;
 	case V4L2_MBUS_FMT_VYUY8_2X8:
-		mt9m111->swap_yuv_y_chromas = 0;
-		mt9m111->swap_yuv_cb_cr = 1;
-		ret = mt9m111_setfmt_yuv(client);
+		data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B;
 		break;
 	case V4L2_MBUS_FMT_YUYV8_2X8:
-		mt9m111->swap_yuv_y_chromas = 1;
-		mt9m111->swap_yuv_cb_cr = 0;
-		ret = mt9m111_setfmt_yuv(client);
+		data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN;
 		break;
 	case V4L2_MBUS_FMT_YVYU8_2X8:
-		mt9m111->swap_yuv_y_chromas = 1;
-		mt9m111->swap_yuv_cb_cr = 1;
-		ret = mt9m111_setfmt_yuv(client);
+		data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN |
+			MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B;
 		break;
 	default:
-		dev_err(&client->dev, "Pixel format not handled : %x\n",
-			code);
-		ret = -EINVAL;
+		dev_err(&client->dev, "Pixel format not handled: %x\n", code);
+		return -EINVAL;
 	}
 
+	ret = reg_mask(OUTPUT_FORMAT_CTRL2_A, data_outfmt2,
+		       mask_outfmt2);
+	if (!ret)
+		ret = reg_mask(OUTPUT_FORMAT_CTRL2_B, data_outfmt2,
+			       mask_outfmt2);
+
 	return ret;
 }
 
@@ -561,7 +532,7 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd,
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	const struct mt9m111_datafmt *fmt;
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 	struct v4l2_rect rect = {
 		.left	= mt9m111->rect.left,
 		.top	= mt9m111->rect.top,
@@ -579,9 +550,9 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd,
 		"%s code=%x left=%d, top=%d, width=%d, height=%d\n", __func__,
 		mf->code, rect.left, rect.top, rect.width, rect.height);
 
-	ret = mt9m111_make_rect(client, &rect);
+	ret = mt9m111_make_rect(mt9m111, &rect);
 	if (!ret)
-		ret = mt9m111_set_pixfmt(client, mf->code);
+		ret = mt9m111_set_pixfmt(mt9m111, mf->code);
 	if (!ret) {
 		mt9m111->rect	= rect;
 		mt9m111->fmt	= fmt;
@@ -594,8 +565,7 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd,
 static int mt9m111_try_fmt(struct v4l2_subdev *sd,
 			   struct v4l2_mbus_framefmt *mf)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 	const struct mt9m111_datafmt *fmt;
 	bool bayer = mf->code == V4L2_MBUS_FMT_SBGGR8_1X8 ||
 		mf->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE;
@@ -635,7 +605,7 @@ static int mt9m111_g_chip_ident(struct v4l2_subdev *sd,
 				struct v4l2_dbg_chip_ident *id)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 
 	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
 		return -EINVAL;
@@ -726,21 +696,16 @@ static const struct v4l2_queryctrl mt9m111_controls[] = {
 	}
 };
 
-static int mt9m111_resume(struct soc_camera_device *icd);
-static int mt9m111_suspend(struct soc_camera_device *icd, pm_message_t state);
-
 static struct soc_camera_ops mt9m111_ops = {
-	.suspend		= mt9m111_suspend,
-	.resume			= mt9m111_resume,
 	.query_bus_param	= mt9m111_query_bus_param,
 	.set_bus_param		= mt9m111_set_bus_param,
 	.controls		= mt9m111_controls,
 	.num_controls		= ARRAY_SIZE(mt9m111_controls),
 };
 
-static int mt9m111_set_flip(struct i2c_client *client, int flip, int mask)
+static int mt9m111_set_flip(struct mt9m111 *mt9m111, int flip, int mask)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	if (mt9m111->context == HIGHPOWER) {
@@ -758,8 +723,9 @@ static int mt9m111_set_flip(struct i2c_client *client, int flip, int mask)
 	return ret;
 }
 
-static int mt9m111_get_global_gain(struct i2c_client *client)
+static int mt9m111_get_global_gain(struct mt9m111 *mt9m111)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int data;
 
 	data = reg_read(GLOBAL_GAIN);
@@ -769,9 +735,9 @@ static int mt9m111_get_global_gain(struct i2c_client *client)
 	return data;
 }
 
-static int mt9m111_set_global_gain(struct i2c_client *client, int gain)
+static int mt9m111_set_global_gain(struct mt9m111 *mt9m111, int gain)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	u16 val;
 
 	if (gain > 63 * 2 * 2)
@@ -788,9 +754,9 @@ static int mt9m111_set_global_gain(struct i2c_client *client, int gain)
 	return reg_write(GLOBAL_GAIN, val);
 }
 
-static int mt9m111_set_autoexposure(struct i2c_client *client, int on)
+static int mt9m111_set_autoexposure(struct mt9m111 *mt9m111, int on)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	if (on)
@@ -804,9 +770,9 @@ static int mt9m111_set_autoexposure(struct i2c_client *client, int on)
 	return ret;
 }
 
-static int mt9m111_set_autowhitebalance(struct i2c_client *client, int on)
+static int mt9m111_set_autowhitebalance(struct mt9m111 *mt9m111, int on)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	if (on)
@@ -823,7 +789,7 @@ static int mt9m111_set_autowhitebalance(struct i2c_client *client, int on)
 static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 	int data;
 
 	switch (ctrl->id) {
@@ -848,7 +814,7 @@ static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		ctrl->value = !!(data & MT9M111_RMB_MIRROR_COLS);
 		break;
 	case V4L2_CID_GAIN:
-		data = mt9m111_get_global_gain(client);
+		data = mt9m111_get_global_gain(mt9m111);
 		if (data < 0)
 			return data;
 		ctrl->value = data;
@@ -865,8 +831,7 @@ static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 
 static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 	const struct v4l2_queryctrl *qctrl;
 	int ret;
 
@@ -877,22 +842,22 @@ static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
 		mt9m111->vflip = ctrl->value;
-		ret = mt9m111_set_flip(client, ctrl->value,
+		ret = mt9m111_set_flip(mt9m111, ctrl->value,
 					MT9M111_RMB_MIRROR_ROWS);
 		break;
 	case V4L2_CID_HFLIP:
 		mt9m111->hflip = ctrl->value;
-		ret = mt9m111_set_flip(client, ctrl->value,
+		ret = mt9m111_set_flip(mt9m111, ctrl->value,
 					MT9M111_RMB_MIRROR_COLS);
 		break;
 	case V4L2_CID_GAIN:
-		ret = mt9m111_set_global_gain(client, ctrl->value);
+		ret = mt9m111_set_global_gain(mt9m111, ctrl->value);
 		break;
 	case V4L2_CID_EXPOSURE_AUTO:
-		ret =  mt9m111_set_autoexposure(client, ctrl->value);
+		ret =  mt9m111_set_autoexposure(mt9m111, ctrl->value);
 		break;
 	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ret =  mt9m111_set_autowhitebalance(client, ctrl->value);
+		ret =  mt9m111_set_autowhitebalance(mt9m111, ctrl->value);
 		break;
 	default:
 		ret = -EINVAL;
@@ -901,60 +866,52 @@ static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	return ret;
 }
 
-static int mt9m111_suspend(struct soc_camera_device *icd, pm_message_t state)
+static int mt9m111_suspend(struct mt9m111 *mt9m111)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-
-	mt9m111->gain = mt9m111_get_global_gain(client);
+	mt9m111->gain = mt9m111_get_global_gain(mt9m111);
 
 	return 0;
 }
 
-static int mt9m111_restore_state(struct i2c_client *client)
+static void mt9m111_restore_state(struct mt9m111 *mt9m111)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-
-	mt9m111_set_context(client, mt9m111->context);
-	mt9m111_set_pixfmt(client, mt9m111->fmt->code);
-	mt9m111_setup_rect(client, &mt9m111->rect);
-	mt9m111_set_flip(client, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS);
-	mt9m111_set_flip(client, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS);
-	mt9m111_set_global_gain(client, mt9m111->gain);
-	mt9m111_set_autoexposure(client, mt9m111->autoexposure);
-	mt9m111_set_autowhitebalance(client, mt9m111->autowhitebalance);
-	return 0;
+	mt9m111_set_context(mt9m111, mt9m111->context);
+	mt9m111_set_pixfmt(mt9m111, mt9m111->fmt->code);
+	mt9m111_setup_rect(mt9m111, &mt9m111->rect);
+	mt9m111_set_flip(mt9m111, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS);
+	mt9m111_set_flip(mt9m111, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS);
+	mt9m111_set_global_gain(mt9m111, mt9m111->gain);
+	mt9m111_set_autoexposure(mt9m111, mt9m111->autoexposure);
+	mt9m111_set_autowhitebalance(mt9m111, mt9m111->autowhitebalance);
 }
 
-static int mt9m111_resume(struct soc_camera_device *icd)
+static int mt9m111_resume(struct mt9m111 *mt9m111)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret = 0;
 
 	if (mt9m111->powered) {
-		ret = mt9m111_enable(client);
+		ret = mt9m111_enable(mt9m111);
 		if (!ret)
-			ret = mt9m111_reset(client);
+			ret = mt9m111_reset(mt9m111);
 		if (!ret)
-			ret = mt9m111_restore_state(client);
+			mt9m111_restore_state(mt9m111);
 	}
 	return ret;
 }
 
-static int mt9m111_init(struct i2c_client *client)
+static int mt9m111_init(struct mt9m111 *mt9m111)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	mt9m111->context = HIGHPOWER;
-	ret = mt9m111_enable(client);
+	ret = mt9m111_enable(mt9m111);
 	if (!ret)
-		ret = mt9m111_reset(client);
+		ret = mt9m111_reset(mt9m111);
 	if (!ret)
-		ret = mt9m111_set_context(client, mt9m111->context);
+		ret = mt9m111_set_context(mt9m111, mt9m111->context);
 	if (!ret)
-		ret = mt9m111_set_autoexposure(client, mt9m111->autoexposure);
+		ret = mt9m111_set_autoexposure(mt9m111, mt9m111->autoexposure);
 	if (ret)
 		dev_err(&client->dev, "mt9m111 init failed: %d\n", ret);
 	return ret;
@@ -971,20 +928,13 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
 	s32 data;
 	int ret;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	mt9m111->autoexposure = 1;
 	mt9m111->autowhitebalance = 1;
 
-	mt9m111->swap_rgb_even_odd = 1;
-	mt9m111->swap_rgb_red_blue = 1;
-
 	data = reg_read(CHIP_VERSION);
 
 	switch (data) {
@@ -1005,16 +955,51 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
 		goto ei2c;
 	}
 
-	ret = mt9m111_init(client);
+	ret = mt9m111_init(mt9m111);
 
 ei2c:
 	return ret;
 }
 
+static int mt9m111_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret = 0;
+
+	mutex_lock(&mt9m111->power_lock);
+
+	/*
+	 * If the power count is modified from 0 to != 0 or from != 0 to 0,
+	 * update the power state.
+	 */
+	if (mt9m111->power_count == !on) {
+		if (on) {
+			ret = mt9m111_resume(mt9m111);
+			if (ret) {
+				dev_err(&client->dev,
+					"Failed to resume the sensor: %d\n", ret);
+				goto out;
+			}
+		} else {
+			mt9m111_suspend(mt9m111);
+		}
+	}
+
+	/* Update the power count. */
+	mt9m111->power_count += on ? 1 : -1;
+	WARN_ON(mt9m111->power_count < 0);
+
+out:
+	mutex_unlock(&mt9m111->power_lock);
+	return ret;
+}
+
 static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = {
 	.g_ctrl		= mt9m111_g_ctrl,
 	.s_ctrl		= mt9m111_s_ctrl,
 	.g_chip_ident	= mt9m111_g_chip_ident,
+	.s_power	= mt9m111_s_power,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= mt9m111_g_register,
 	.s_register	= mt9m111_s_register,
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 7ce279c..30547cc 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -700,8 +700,7 @@ static int mt9t031_runtime_suspend(struct device *dev)
 static int mt9t031_runtime_resume(struct device *dev)
 {
 	struct video_device *vdev = to_video_device(dev);
-	struct soc_camera_device *icd = container_of(vdev->parent,
-		struct soc_camera_device, dev);
+	struct soc_camera_device *icd = dev_get_drvdata(vdev->parent);
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
index bffa9ee..d2e0a50 100644
--- a/drivers/media/video/mt9t112.c
+++ b/drivers/media/video/mt9t112.c
@@ -1057,13 +1057,9 @@ static int mt9t112_camera_probe(struct soc_camera_device *icd,
 	const char          *devname;
 	int                  chipid;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * check and show chip ID
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
index 4904d25..893a8b8 100644
--- a/drivers/media/video/mt9v011.c
+++ b/drivers/media/video/mt9v011.c
@@ -54,11 +54,20 @@ static struct v4l2_queryctrl mt9v011_qctrl[] = {
 		.type = V4L2_CTRL_TYPE_INTEGER,
 		.name = "Gain",
 		.minimum = 0,
-		.maximum = (1 << 10) - 1,
+		.maximum = (1 << 12) - 1 - 0x0020,
 		.step = 1,
 		.default_value = 0x0020,
 		.flags = 0,
 	}, {
+		.id = V4L2_CID_EXPOSURE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Exposure",
+		.minimum = 0,
+		.maximum = 2047,
+		.step = 1,
+		.default_value = 0x01fc,
+		.flags = 0,
+	}, {
 		.id = V4L2_CID_RED_BALANCE,
 		.type = V4L2_CTRL_TYPE_INTEGER,
 		.name = "Red Balance",
@@ -105,7 +114,8 @@ struct mt9v011 {
 	unsigned hflip:1;
 	unsigned vflip:1;
 
-	u16 global_gain, red_bal, blue_bal;
+	u16 global_gain, exposure;
+	s16 red_bal, blue_bal;
 };
 
 static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd)
@@ -180,24 +190,68 @@ static const struct i2c_reg_value mt9v011_init_default[] = {
 		{ R07_MT9V011_OUT_CTRL, 0x0002 },	/* chip enable */
 };
 
+
+static u16 calc_mt9v011_gain(s16 lineargain)
+{
+
+	u16 digitalgain = 0;
+	u16 analogmult = 0;
+	u16 analoginit = 0;
+
+	if (lineargain < 0)
+		lineargain = 0;
+
+	/* recommended minimum */
+	lineargain += 0x0020;
+
+	if (lineargain > 2047)
+		lineargain = 2047;
+
+	if (lineargain > 1023) {
+		digitalgain = 3;
+		analogmult = 3;
+		analoginit = lineargain / 16;
+	} else if (lineargain > 511) {
+		digitalgain = 1;
+		analogmult = 3;
+		analoginit = lineargain / 8;
+	} else if (lineargain > 255) {
+		analogmult = 3;
+		analoginit = lineargain / 4;
+	} else if (lineargain > 127) {
+		analogmult = 1;
+		analoginit = lineargain / 2;
+	} else
+		analoginit = lineargain;
+
+	return analoginit + (analogmult << 7) + (digitalgain << 9);
+
+}
+
 static void set_balance(struct v4l2_subdev *sd)
 {
 	struct mt9v011 *core = to_mt9v011(sd);
-	u16 green1_gain, green2_gain, blue_gain, red_gain;
+	u16 green_gain, blue_gain, red_gain;
+	u16 exposure;
+	s16 bal;
 
-	green1_gain = core->global_gain;
-	green2_gain = core->global_gain;
+	exposure = core->exposure;
 
-	blue_gain = core->global_gain +
-		    core->global_gain * core->blue_bal / (1 << 9);
+	green_gain = calc_mt9v011_gain(core->global_gain);
 
-	red_gain = core->global_gain +
-		   core->global_gain * core->blue_bal / (1 << 9);
+	bal = core->global_gain;
+	bal += (core->blue_bal * core->global_gain / (1 << 7));
+	blue_gain = calc_mt9v011_gain(bal);
 
-	mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain);
-	mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN,  green1_gain);
+	bal = core->global_gain;
+	bal += (core->red_bal * core->global_gain / (1 << 7));
+	red_gain = calc_mt9v011_gain(bal);
+
+	mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green_gain);
+	mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green_gain);
 	mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain);
 	mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
+	mt9v011_write(sd, R09_MT9V011_SHUTTER_WIDTH, exposure);
 }
 
 static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator)
@@ -286,7 +340,7 @@ static void set_res(struct v4l2_subdev *sd)
 	 * be missing.
 	 */
 
-	hstart = 14 + (640 - core->width) / 2;
+	hstart = 20 + (640 - core->width) / 2;
 	mt9v011_write(sd, R02_MT9V011_COLSTART, hstart);
 	mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
 	mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
@@ -338,6 +392,9 @@ static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	case V4L2_CID_GAIN:
 		ctrl->value = core->global_gain;
 		return 0;
+	case V4L2_CID_EXPOSURE:
+		ctrl->value = core->exposure;
+		return 0;
 	case V4L2_CID_RED_BALANCE:
 		ctrl->value = core->red_bal;
 		return 0;
@@ -392,6 +449,9 @@ static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	case V4L2_CID_GAIN:
 		core->global_gain = ctrl->value;
 		break;
+	case V4L2_CID_EXPOSURE:
+		core->exposure = ctrl->value;
+		break;
 	case V4L2_CID_RED_BALANCE:
 		core->red_bal = ctrl->value;
 		break;
@@ -598,6 +658,7 @@ static int mt9v011_probe(struct i2c_client *c,
 	}
 
 	core->global_gain = 0x0024;
+	core->exposure = 0x01fc;
 	core->width  = 640;
 	core->height = 480;
 	core->xtal = 27000000;	/* Hz */
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index fc76ed1..51b0fcc 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -728,9 +728,9 @@ static int mt9v022_video_probe(struct soc_camera_device *icd,
 	int ret;
 	unsigned long flags;
 
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/* Read out the chip version register */
 	data = reg_read(client, MT9V022_CHIP_VERSION);
@@ -809,8 +809,8 @@ static void mt9v022_video_remove(struct soc_camera_device *icd)
 {
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	dev_dbg(&icd->dev, "Video removed: %p, %p\n",
-		icd->dev.parent, icd->vdev);
+	dev_dbg(icd->pdev, "Video removed: %p, %p\n",
+		icd->parent, icd->vdev);
 	if (icl->free_bus)
 		icl->free_bus(icl);
 }
diff --git a/drivers/media/video/mt9v032.c b/drivers/media/video/mt9v032.c
index 1319c2c..c64e1dc 100644
--- a/drivers/media/video/mt9v032.c
+++ b/drivers/media/video/mt9v032.c
@@ -31,14 +31,14 @@
 #define MT9V032_CHIP_VERSION				0x00
 #define		MT9V032_CHIP_ID_REV1			0x1311
 #define		MT9V032_CHIP_ID_REV3			0x1313
-#define MT9V032_ROW_START				0x01
-#define		MT9V032_ROW_START_MIN			4
-#define		MT9V032_ROW_START_DEF			10
-#define		MT9V032_ROW_START_MAX			482
-#define MT9V032_COLUMN_START				0x02
+#define MT9V032_COLUMN_START				0x01
 #define		MT9V032_COLUMN_START_MIN		1
-#define		MT9V032_COLUMN_START_DEF		2
+#define		MT9V032_COLUMN_START_DEF		1
 #define		MT9V032_COLUMN_START_MAX		752
+#define MT9V032_ROW_START				0x02
+#define		MT9V032_ROW_START_MIN			4
+#define		MT9V032_ROW_START_DEF			5
+#define		MT9V032_ROW_START_MAX			482
 #define MT9V032_WINDOW_HEIGHT				0x03
 #define		MT9V032_WINDOW_HEIGHT_MIN		1
 #define		MT9V032_WINDOW_HEIGHT_DEF		480
@@ -420,13 +420,13 @@ static int mt9v032_set_crop(struct v4l2_subdev *subdev,
 	struct v4l2_rect *__crop;
 	struct v4l2_rect rect;
 
-	/* Clamp the crop rectangle boundaries and align them to a multiple of 2
-	 * pixels.
+	/* Clamp the crop rectangle boundaries and align them to a non multiple
+	 * of 2 pixels to ensure a GRBG Bayer pattern.
 	 */
-	rect.left = clamp(ALIGN(crop->rect.left, 2),
+	rect.left = clamp(ALIGN(crop->rect.left + 1, 2) - 1,
 			  MT9V032_COLUMN_START_MIN,
 			  MT9V032_COLUMN_START_MAX);
-	rect.top = clamp(ALIGN(crop->rect.top, 2),
+	rect.top = clamp(ALIGN(crop->rect.top + 1, 2) - 1,
 			 MT9V032_ROW_START_MIN,
 			 MT9V032_ROW_START_MAX);
 	rect.width = clamp(ALIGN(crop->rect.width, 2),
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 63f8a0c..087db12 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -31,7 +31,6 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/time.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 
 #include <media/soc_camera.h>
@@ -73,7 +72,7 @@
 #define CSISR_SOF_INT		(1 << 16)
 #define CSISR_DRDY		(1 << 0)
 
-#define VERSION_CODE KERNEL_VERSION(0, 0, 1)
+#define DRIVER_VERSION "0.0.2"
 #define DRIVER_NAME "mx1-camera"
 
 #define CSI_IRQ_MASK	(CSISR_SFF_OR_INT | CSISR_RFF_OR_INT | \
@@ -142,7 +141,7 @@ static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
 		*count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
 
-	dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size);
+	dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size);
 
 	return 0;
 }
@@ -154,7 +153,7 @@ static void free_buffer(struct videobuf_queue *vq, struct mx1_buffer *buf)
 
 	BUG_ON(in_interrupt());
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	/*
@@ -179,7 +178,7 @@ static int mx1_videobuf_prepare(struct videobuf_queue *vq,
 	if (bytes_per_line < 0)
 		return bytes_per_line;
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	/* Added list head initialization on alloc */
@@ -232,7 +231,7 @@ out:
 static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
 {
 	struct videobuf_buffer *vbuf = &pcdev->active->vb;
-	struct device *dev = pcdev->icd->dev.parent;
+	struct device *dev = pcdev->icd->parent;
 	int ret;
 
 	if (unlikely(!pcdev->active)) {
@@ -256,11 +255,11 @@ static void mx1_videobuf_queue(struct videobuf_queue *vq,
 						struct videobuf_buffer *vb)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	list_add_tail(&vb->queue, &pcdev->capture);
@@ -287,7 +286,7 @@ static void mx1_videobuf_release(struct videobuf_queue *vq,
 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
 #ifdef DEBUG
 	struct soc_camera_device *icd = vq->priv_data;
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 
 	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
@@ -343,7 +342,7 @@ static void mx1_camera_wakeup(struct mx1_camera_dev *pcdev,
 static void mx1_camera_dma_irq(int channel, void *data)
 {
 	struct mx1_camera_dev *pcdev = data;
-	struct device *dev = pcdev->icd->dev.parent;
+	struct device *dev = pcdev->icd->parent;
 	struct mx1_buffer *buf;
 	struct videobuf_buffer *vb;
 	unsigned long flags;
@@ -378,10 +377,10 @@ static struct videobuf_queue_ops mx1_videobuf_ops = {
 static void mx1_camera_init_videobuf(struct videobuf_queue *q,
 				     struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 
-	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->dev.parent,
+	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->parent,
 				&pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				V4L2_FIELD_NONE,
 				sizeof(struct mx1_buffer), icd, &icd->video_lock);
@@ -401,7 +400,7 @@ static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
 	 */
 	div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1;
 
-	dev_dbg(pcdev->icd->dev.parent,
+	dev_dbg(pcdev->icd->parent,
 		"System clock %lukHz, target freq %dkHz, divisor %lu\n",
 		lcdclk / 1000, mclk / 1000, div);
 
@@ -412,7 +411,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
 {
 	unsigned int csicr1 = CSICR1_EN;
 
-	dev_dbg(pcdev->icd->dev.parent, "Activate device\n");
+	dev_dbg(pcdev->icd->parent, "Activate device\n");
 
 	clk_enable(pcdev->clk);
 
@@ -428,7 +427,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
 
 static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev)
 {
-	dev_dbg(pcdev->icd->dev.parent, "Deactivate device\n");
+	dev_dbg(pcdev->icd->parent, "Deactivate device\n");
 
 	/* Disable all CSI interface */
 	__raw_writel(0x00, pcdev->base + CSICR1);
@@ -442,13 +441,13 @@ static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev)
  */
 static int mx1_camera_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 
 	if (pcdev->icd)
 		return -EBUSY;
 
-	dev_info(icd->dev.parent, "MX1 Camera driver attached to camera %d\n",
+	dev_info(icd->parent, "MX1 Camera driver attached to camera %d\n",
 		 icd->devnum);
 
 	mx1_camera_activate(pcdev);
@@ -460,7 +459,7 @@ static int mx1_camera_add_device(struct soc_camera_device *icd)
 
 static void mx1_camera_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 	unsigned int csicr1;
 
@@ -473,7 +472,7 @@ static void mx1_camera_remove_device(struct soc_camera_device *icd)
 	/* Stop DMA engine */
 	imx_dma_disable(pcdev->dma_chan);
 
-	dev_info(icd->dev.parent, "MX1 Camera driver detached from camera %d\n",
+	dev_info(icd->parent, "MX1 Camera driver detached from camera %d\n",
 		 icd->devnum);
 
 	mx1_camera_deactivate(pcdev);
@@ -491,7 +490,7 @@ static int mx1_camera_set_crop(struct soc_camera_device *icd,
 
 static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 	unsigned long camera_flags, common_flags;
 	unsigned int csicr1;
@@ -562,14 +561,14 @@ static int mx1_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n",
+		dev_warn(icd->parent, "Format %x not found\n",
 			 pix->pixelformat);
 		return -EINVAL;
 	}
 
 	buswidth = xlate->host_fmt->bits_per_sample;
 	if (buswidth > 8) {
-		dev_warn(icd->dev.parent,
+		dev_warn(icd->parent,
 			 "bits-per-sample %d for format %x unsupported\n",
 			 buswidth, pix->pixelformat);
 		return -EINVAL;
@@ -609,7 +608,7 @@ static int mx1_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n",
+		dev_warn(icd->parent, "Format %x not found\n",
 			 pix->pixelformat);
 		return -EINVAL;
 	}
@@ -676,7 +675,6 @@ static int mx1_camera_querycap(struct soc_camera_host *ici,
 {
 	/* cap->name is set by the friendly caller:-> */
 	strlcpy(cap->card, "i.MX1/i.MXL Camera", sizeof(cap->card));
-	cap->version = VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
@@ -883,4 +881,5 @@ module_exit(mx1_camera_exit);
 MODULE_DESCRIPTION("i.MX1/i.MXL SoC Camera Host driver");
 MODULE_AUTHOR("Paulius Zaleckas <paulius.zaleckas@teltonika.lt>");
 MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRIVER_VERSION);
 MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index 4eab1c6..ec2410c 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -23,7 +23,6 @@
 #include <linux/mm.h>
 #include <linux/moduleparam.h>
 #include <linux/time.h>
-#include <linux/version.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
@@ -47,7 +46,7 @@
 #include <asm/dma.h>
 
 #define MX2_CAM_DRV_NAME "mx2-camera"
-#define MX2_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
+#define MX2_CAM_VERSION "0.0.6"
 #define MX2_CAM_DRIVER_DESCRIPTION "i.MX2x_Camera"
 
 /* reset values */
@@ -278,7 +277,7 @@ static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev)
  */
 static int mx2_camera_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 	int ret;
 	u32 csicr1;
@@ -303,7 +302,7 @@ static int mx2_camera_add_device(struct soc_camera_device *icd)
 
 	pcdev->icd = icd;
 
-	dev_info(icd->dev.parent, "Camera driver attached to camera %d\n",
+	dev_info(icd->parent, "Camera driver attached to camera %d\n",
 		 icd->devnum);
 
 	return 0;
@@ -311,12 +310,12 @@ static int mx2_camera_add_device(struct soc_camera_device *icd)
 
 static void mx2_camera_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 
 	BUG_ON(icd != pcdev->icd);
 
-	dev_info(icd->dev.parent, "Camera driver detached from camera %d\n",
+	dev_info(icd->parent, "Camera driver detached from camera %d\n",
 		 icd->devnum);
 
 	mx2_camera_deactivate(pcdev);
@@ -437,7 +436,7 @@ static int mx2_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
 			icd->current_fmt->host_fmt);
 
-	dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
+	dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size);
 
 	if (bytes_per_line < 0)
 		return bytes_per_line;
@@ -457,7 +456,7 @@ static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf)
 	struct soc_camera_device *icd = vq->priv_data;
 	struct videobuf_buffer *vb = &buf->vb;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	/*
@@ -467,7 +466,7 @@ static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf)
 	videobuf_waiton(vq, vb, 0, 0);
 
 	videobuf_dma_contig_free(vq, vb);
-	dev_dbg(&icd->dev, "%s freed\n", __func__);
+	dev_dbg(icd->parent, "%s freed\n", __func__);
 
 	vb->state = VIDEOBUF_NEEDS_INIT;
 }
@@ -481,7 +480,7 @@ static int mx2_videobuf_prepare(struct videobuf_queue *vq,
 			icd->current_fmt->host_fmt);
 	int ret = 0;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	if (bytes_per_line < 0)
@@ -533,12 +532,12 @@ static void mx2_videobuf_queue(struct videobuf_queue *vq,
 {
 	struct soc_camera_device *icd = vq->priv_data;
 	struct soc_camera_host *ici =
-		to_soc_camera_host(icd->dev.parent);
+		to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 	struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
 	unsigned long flags;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	spin_lock_irqsave(&pcdev->lock, flags);
@@ -611,27 +610,27 @@ static void mx2_videobuf_release(struct videobuf_queue *vq,
 				 struct videobuf_buffer *vb)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 	struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
 	unsigned long flags;
 
 #ifdef DEBUG
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	switch (vb->state) {
 	case VIDEOBUF_ACTIVE:
-		dev_info(&icd->dev, "%s (active)\n", __func__);
+		dev_info(icd->parent, "%s (active)\n", __func__);
 		break;
 	case VIDEOBUF_QUEUED:
-		dev_info(&icd->dev, "%s (queued)\n", __func__);
+		dev_info(icd->parent, "%s (queued)\n", __func__);
 		break;
 	case VIDEOBUF_PREPARED:
-		dev_info(&icd->dev, "%s (prepared)\n", __func__);
+		dev_info(icd->parent, "%s (prepared)\n", __func__);
 		break;
 	default:
-		dev_info(&icd->dev, "%s (unknown) %d\n", __func__,
+		dev_info(icd->parent, "%s (unknown) %d\n", __func__,
 				vb->state);
 		break;
 	}
@@ -678,7 +677,7 @@ static struct videobuf_queue_ops mx2_videobuf_ops = {
 static void mx2_camera_init_videobuf(struct videobuf_queue *q,
 			      struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 
 	videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev,
@@ -719,7 +718,7 @@ static void mx27_camera_emma_buf_init(struct soc_camera_device *icd,
 		int bytesperline)
 {
 	struct soc_camera_host *ici =
-		to_soc_camera_host(icd->dev.parent);
+		to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 
 	writel(pcdev->discard_buffer_dma,
@@ -772,7 +771,7 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
 		__u32 pixfmt)
 {
 	struct soc_camera_host *ici =
-		to_soc_camera_host(icd->dev.parent);
+		to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 	unsigned long camera_flags, common_flags;
 	int ret = 0;
@@ -891,7 +890,7 @@ static int mx2_camera_set_crop(struct soc_camera_device *icd,
 	if (ret < 0)
 		return ret;
 
-	dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
+	dev_dbg(icd->parent, "Sensor cropped %dx%d\n",
 		mf.width, mf.height);
 
 	icd->user_width		= mf.width;
@@ -911,7 +910,7 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n",
+		dev_warn(icd->parent, "Format %x not found\n",
 				pix->pixelformat);
 		return -EINVAL;
 	}
@@ -951,7 +950,7 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (pixfmt && !xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -974,11 +973,16 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd,
 		if (pix->bytesperline < 0)
 			return pix->bytesperline;
 		pix->sizeimage = pix->height * pix->bytesperline;
-		if (pix->sizeimage > (4 * 0x3ffff)) { /* CSIRXCNT limit */
-			dev_warn(icd->dev.parent,
-					"Image size (%u) above limit\n",
-					pix->sizeimage);
-			return -EINVAL;
+		/* Check against the CSIRXCNT limit */
+		if (pix->sizeimage > 4 * 0x3ffff) {
+			/* Adjust geometry, preserve aspect ratio */
+			unsigned int new_height = int_sqrt(4 * 0x3ffff *
+					pix->height / pix->bytesperline);
+			pix->width = new_height * pix->width / pix->height;
+			pix->height = new_height;
+			pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
+							xlate->host_fmt);
+			BUG_ON(pix->bytesperline < 0);
 		}
 	}
 
@@ -996,7 +1000,7 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd,
 	if (mf.field == V4L2_FIELD_ANY)
 		mf.field = V4L2_FIELD_NONE;
 	if (mf.field != V4L2_FIELD_NONE) {
-		dev_err(icd->dev.parent, "Field type %d unsupported.\n",
+		dev_err(icd->parent, "Field type %d unsupported.\n",
 				mf.field);
 		return -EINVAL;
 	}
@@ -1014,7 +1018,6 @@ static int mx2_camera_querycap(struct soc_camera_host *ici,
 {
 	/* cap->name is set by the friendly caller:-> */
 	strlcpy(cap->card, MX2_CAM_DRIVER_DESCRIPTION, sizeof(cap->card));
-	cap->version = MX2_CAM_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
@@ -1523,3 +1526,4 @@ module_exit(mx2_camera_exit);
 MODULE_DESCRIPTION("i.MX27/i.MX25 SoC Camera Host driver");
 MODULE_AUTHOR("Sascha Hauer <sha@pengutronix.de>");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(MX2_CAM_VERSION);
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index c7680eb..c045b47 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -11,7 +11,6 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -195,7 +194,7 @@ static int mx3_videobuf_setup(struct vb2_queue *vq,
 			unsigned long sizes[], void *alloc_ctxs[])
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
 						icd->current_fmt->host_fmt);
@@ -224,7 +223,7 @@ static int mx3_videobuf_setup(struct vb2_queue *vq,
 static int mx3_videobuf_prepare(struct vb2_buffer *vb)
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
 	struct scatterlist *sg;
@@ -242,7 +241,7 @@ static int mx3_videobuf_prepare(struct vb2_buffer *vb)
 	new_size = bytes_per_line * icd->user_height;
 
 	if (vb2_plane_size(vb, 0) < new_size) {
-		dev_err(icd->dev.parent, "Buffer too small (%lu < %zu)\n",
+		dev_err(icd->parent, "Buffer too small (%lu < %zu)\n",
 			vb2_plane_size(vb, 0), new_size);
 		return -ENOBUFS;
 	}
@@ -284,7 +283,7 @@ static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc)
 static void mx3_videobuf_queue(struct vb2_buffer *vb)
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct mx3_camera_buffer *buf = to_mx3_vb(vb);
 	struct dma_async_tx_descriptor *txd = buf->txd;
@@ -337,7 +336,7 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb)
 	spin_unlock_irq(&mx3_cam->lock);
 
 	cookie = txd->tx_submit(txd);
-	dev_dbg(icd->dev.parent, "Submitted cookie %d DMA 0x%08x\n",
+	dev_dbg(icd->parent, "Submitted cookie %d DMA 0x%08x\n",
 		cookie, sg_dma_address(&buf->sg));
 
 	if (cookie >= 0)
@@ -358,13 +357,13 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb)
 static void mx3_videobuf_release(struct vb2_buffer *vb)
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct mx3_camera_buffer *buf = to_mx3_vb(vb);
 	struct dma_async_tx_descriptor *txd = buf->txd;
 	unsigned long flags;
 
-	dev_dbg(icd->dev.parent,
+	dev_dbg(icd->parent,
 		"Release%s DMA 0x%08x, queue %sempty\n",
 		mx3_cam->active == buf ? " active" : "", sg_dma_address(&buf->sg),
 		list_empty(&buf->queue) ? "" : "not ");
@@ -403,7 +402,7 @@ static int mx3_videobuf_init(struct vb2_buffer *vb)
 static int mx3_stop_streaming(struct vb2_queue *q)
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(q);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
 	struct dma_chan *chan;
@@ -499,7 +498,7 @@ static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam,
 
 	clk_enable(mx3_cam->clk);
 	rate = clk_round_rate(mx3_cam->clk, mx3_cam->mclk);
-	dev_dbg(icd->dev.parent, "Set SENS_CONF to %x, rate %ld\n", conf, rate);
+	dev_dbg(icd->parent, "Set SENS_CONF to %x, rate %ld\n", conf, rate);
 	if (rate)
 		clk_set_rate(mx3_cam->clk, rate);
 }
@@ -507,7 +506,7 @@ static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam,
 /* Called with .video_lock held */
 static int mx3_camera_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 
 	if (mx3_cam->icd)
@@ -517,7 +516,7 @@ static int mx3_camera_add_device(struct soc_camera_device *icd)
 
 	mx3_cam->icd = icd;
 
-	dev_info(icd->dev.parent, "MX3 Camera driver attached to camera %d\n",
+	dev_info(icd->parent, "MX3 Camera driver attached to camera %d\n",
 		 icd->devnum);
 
 	return 0;
@@ -526,7 +525,7 @@ static int mx3_camera_add_device(struct soc_camera_device *icd)
 /* Called with .video_lock held */
 static void mx3_camera_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct idmac_channel **ichan = &mx3_cam->idmac_channel[0];
 
@@ -541,7 +540,7 @@ static void mx3_camera_remove_device(struct soc_camera_device *icd)
 
 	mx3_cam->icd = NULL;
 
-	dev_info(icd->dev.parent, "MX3 Camera driver detached from camera %d\n",
+	dev_info(icd->parent, "MX3 Camera driver detached from camera %d\n",
 		 icd->devnum);
 }
 
@@ -608,12 +607,12 @@ static int test_platform_param(struct mx3_camera_dev *mx3_cam,
 static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
 				    const unsigned int depth)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	unsigned long bus_flags, camera_flags;
 	int ret = test_platform_param(mx3_cam, depth, &bus_flags);
 
-	dev_dbg(icd->dev.parent, "request bus width %d bit: %d\n", depth, ret);
+	dev_dbg(icd->parent, "request bus width %d bit: %d\n", depth, ret);
 
 	if (ret < 0)
 		return ret;
@@ -622,7 +621,7 @@ static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
 
 	ret = soc_camera_bus_param_compatible(camera_flags, bus_flags);
 	if (ret < 0)
-		dev_warn(icd->dev.parent,
+		dev_warn(icd->parent,
 			 "Flags incompatible: camera %lx, host %lx\n",
 			 camera_flags, bus_flags);
 
@@ -676,7 +675,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int id
 				  struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	int formats = 0, ret;
 	enum v4l2_mbus_pixelcode code;
 	const struct soc_mbus_pixelfmt *fmt;
@@ -688,7 +687,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int id
 
 	fmt = soc_mbus_get_fmtdesc(code);
 	if (!fmt) {
-		dev_warn(icd->dev.parent,
+		dev_warn(icd->parent,
 			 "Unsupported format code #%u: %d\n", idx, code);
 		return 0;
 	}
@@ -816,7 +815,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd,
 			       struct v4l2_crop *a)
 {
 	struct v4l2_rect *rect = &a->c;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct v4l2_mbus_framefmt mf;
@@ -849,7 +848,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd,
 		configure_geometry(mx3_cam, mf.width, mf.height,
 				   icd->current_fmt->host_fmt);
 
-	dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
+	dev_dbg(icd->parent, "Sensor cropped %dx%d\n",
 		mf.width, mf.height);
 
 	icd->user_width		= mf.width;
@@ -861,7 +860,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd,
 static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
@@ -871,13 +870,13 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n",
+		dev_warn(icd->parent, "Format %x not found\n",
 			 pix->pixelformat);
 		return -EINVAL;
 	}
 
 	stride_align(&pix->width);
-	dev_dbg(icd->dev.parent, "Set format %dx%d\n", pix->width, pix->height);
+	dev_dbg(icd->parent, "Set format %dx%d\n", pix->width, pix->height);
 
 	/*
 	 * Might have to perform a complete interface initialisation like in
@@ -913,13 +912,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 	pix->colorspace		= mf.colorspace;
 	icd->current_fmt	= xlate;
 
-	pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
-						    xlate->host_fmt);
-	if (pix->bytesperline < 0)
-		return pix->bytesperline;
-	pix->sizeimage = pix->height * pix->bytesperline;
-
-	dev_dbg(icd->dev.parent, "Sensor set %dx%d\n", pix->width, pix->height);
+	dev_dbg(icd->parent, "Sensor set %dx%d\n", pix->width, pix->height);
 
 	return ret;
 }
@@ -936,7 +929,7 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (pixfmt && !xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -946,12 +939,6 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 	if (pix->width > 4096)
 		pix->width = 4096;
 
-	pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
-						    xlate->host_fmt);
-	if (pix->bytesperline < 0)
-		return pix->bytesperline;
-	pix->sizeimage = pix->height * pix->bytesperline;
-
 	/* limit to sensor capabilities */
 	mf.width	= pix->width;
 	mf.height	= pix->height;
@@ -974,7 +961,7 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 	case V4L2_FIELD_NONE:
 		break;
 	default:
-		dev_err(icd->dev.parent, "Field type %d unsupported.\n",
+		dev_err(icd->parent, "Field type %d unsupported.\n",
 			mf.field);
 		ret = -EINVAL;
 	}
@@ -1000,7 +987,6 @@ static int mx3_camera_querycap(struct soc_camera_host *ici,
 {
 	/* cap->name is set by the firendly caller:-> */
 	strlcpy(cap->card, "i.MX3x Camera", sizeof(cap->card));
-	cap->version = KERNEL_VERSION(0, 2, 2);
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
@@ -1008,7 +994,7 @@ static int mx3_camera_querycap(struct soc_camera_host *ici,
 
 static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	unsigned long bus_flags, camera_flags, common_flags;
 	u32 dw, sens_conf;
@@ -1016,7 +1002,7 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	int buswidth;
 	int ret;
 	const struct soc_camera_format_xlate *xlate;
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 
 	fmt = soc_mbus_get_fmtdesc(icd->current_fmt->code);
 	if (!fmt)
@@ -1325,4 +1311,5 @@ module_exit(mx3_camera_exit);
 MODULE_DESCRIPTION("i.MX3x SoC Camera Host driver");
 MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
 MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.2.3");
 MODULE_ALIAS("platform:" MX3_CAM_DRV_NAME);
diff --git a/drivers/media/video/omap/Kconfig b/drivers/media/video/omap/Kconfig
index e63233fd..390ab09 100644
--- a/drivers/media/video/omap/Kconfig
+++ b/drivers/media/video/omap/Kconfig
@@ -1,11 +1,14 @@
+config VIDEO_OMAP2_VOUT_VRFB
+	bool
+
 config VIDEO_OMAP2_VOUT
 	tristate "OMAP2/OMAP3 V4L2-Display driver"
 	depends on ARCH_OMAP2 || ARCH_OMAP3
 	select VIDEOBUF_GEN
 	select VIDEOBUF_DMA_CONTIG
 	select OMAP2_DSS
-	select OMAP2_VRAM
-	select OMAP2_VRFB
+	select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
+	select VIDEO_OMAP2_VOUT_VRFB if VIDEO_OMAP2_VOUT && OMAP2_VRFB
 	default n
 	---help---
 	  V4L2 Display driver support for OMAP2/3 based boards.
diff --git a/drivers/media/video/omap/Makefile b/drivers/media/video/omap/Makefile
index b2878807..fc410b4 100644
--- a/drivers/media/video/omap/Makefile
+++ b/drivers/media/video/omap/Makefile
@@ -4,4 +4,5 @@
 
 # OMAP2/3 Display driver
 omap-vout-y := omap_vout.o omap_voutlib.o
+omap-vout-$(CONFIG_VIDEO_OMAP2_VOUT_VRFB) += omap_vout_vrfb.o
 obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout.o
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index a647894..b5ef362 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -35,28 +35,26 @@
 #include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
 #include <linux/irq.h>
 #include <linux/videodev2.h>
-#include <linux/slab.h>
+#include <linux/dma-mapping.h>
 
 #include <media/videobuf-dma-contig.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 
 #include <plat/dma.h>
-#include <plat/vram.h>
 #include <plat/vrfb.h>
 #include <video/omapdss.h>
 
 #include "omap_voutlib.h"
 #include "omap_voutdef.h"
+#include "omap_vout_vrfb.h"
 
 MODULE_AUTHOR("Texas Instruments");
 MODULE_DESCRIPTION("OMAP Video for Linux Video out driver");
 MODULE_LICENSE("GPL");
 
-
 /* Driver Configuration macros */
 #define VOUT_NAME		"omap_vout"
 
@@ -65,31 +63,6 @@ enum omap_vout_channels {
 	OMAP_VIDEO2,
 };
 
-enum dma_channel_state {
-	DMA_CHAN_NOT_ALLOTED,
-	DMA_CHAN_ALLOTED,
-};
-
-#define QQVGA_WIDTH		160
-#define QQVGA_HEIGHT		120
-
-/* Max Resolution supported by the driver */
-#define VID_MAX_WIDTH		1280	/* Largest width */
-#define VID_MAX_HEIGHT		720	/* Largest height */
-
-/* Mimimum requirement is 2x2 for DSS */
-#define VID_MIN_WIDTH		2
-#define VID_MIN_HEIGHT		2
-
-/* 2048 x 2048 is max res supported by OMAP display controller */
-#define MAX_PIXELS_PER_LINE     2048
-
-#define VRFB_TX_TIMEOUT         1000
-#define VRFB_NUM_BUFS		4
-
-/* Max buffer size tobe allocated during init */
-#define OMAP_VOUT_MAX_BUF_SIZE (VID_MAX_WIDTH*VID_MAX_HEIGHT*4)
-
 static struct videobuf_queue_ops video_vbq_ops;
 /* Variables configurable through module params*/
 static u32 video1_numbuffers = 3;
@@ -172,84 +145,6 @@ static const struct v4l2_fmtdesc omap_formats[] = {
 #define NUM_OUTPUT_FORMATS (ARRAY_SIZE(omap_formats))
 
 /*
- * Allocate buffers
- */
-static unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr)
-{
-	u32 order, size;
-	unsigned long virt_addr, addr;
-
-	size = PAGE_ALIGN(buf_size);
-	order = get_order(size);
-	virt_addr = __get_free_pages(GFP_KERNEL | GFP_DMA, order);
-	addr = virt_addr;
-
-	if (virt_addr) {
-		while (size > 0) {
-			SetPageReserved(virt_to_page(addr));
-			addr += PAGE_SIZE;
-			size -= PAGE_SIZE;
-		}
-	}
-	*phys_addr = (u32) virt_to_phys((void *) virt_addr);
-	return virt_addr;
-}
-
-/*
- * Free buffers
- */
-static void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size)
-{
-	u32 order, size;
-	unsigned long addr = virtaddr;
-
-	size = PAGE_ALIGN(buf_size);
-	order = get_order(size);
-
-	while (size > 0) {
-		ClearPageReserved(virt_to_page(addr));
-		addr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	free_pages((unsigned long) virtaddr, order);
-}
-
-/*
- * Function for allocating video buffers
- */
-static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout,
-		unsigned int *count, int startindex)
-{
-	int i, j;
-
-	for (i = 0; i < *count; i++) {
-		if (!vout->smsshado_virt_addr[i]) {
-			vout->smsshado_virt_addr[i] =
-				omap_vout_alloc_buffer(vout->smsshado_size,
-						&vout->smsshado_phy_addr[i]);
-		}
-		if (!vout->smsshado_virt_addr[i] && startindex != -1) {
-			if (V4L2_MEMORY_MMAP == vout->memory && i >= startindex)
-				break;
-		}
-		if (!vout->smsshado_virt_addr[i]) {
-			for (j = 0; j < i; j++) {
-				omap_vout_free_buffer(
-						vout->smsshado_virt_addr[j],
-						vout->smsshado_size);
-				vout->smsshado_virt_addr[j] = 0;
-				vout->smsshado_phy_addr[j] = 0;
-			}
-			*count = 0;
-			return -ENOMEM;
-		}
-		memset((void *) vout->smsshado_virt_addr[i], 0,
-				vout->smsshado_size);
-	}
-	return 0;
-}
-
-/*
  * Try format
  */
 static int omap_vout_try_format(struct v4l2_pix_format *pix)
@@ -342,73 +237,9 @@ static u32 omap_vout_uservirt_to_phys(u32 virtp)
 }
 
 /*
- * Wakes up the application once the DMA transfer to VRFB space is completed.
- */
-static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void *data)
-{
-	struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data;
-
-	t->tx_status = 1;
-	wake_up_interruptible(&t->wait);
-}
-
-/*
- * Release the VRFB context once the module exits
- */
-static void omap_vout_release_vrfb(struct omap_vout_device *vout)
-{
-	int i;
-
-	for (i = 0; i < VRFB_NUM_BUFS; i++)
-		omap_vrfb_release_ctx(&vout->vrfb_context[i]);
-
-	if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) {
-		vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
-		omap_free_dma(vout->vrfb_dma_tx.dma_ch);
-	}
-}
-
-/*
- * Return true if rotation is 90 or 270
- */
-static inline int rotate_90_or_270(const struct omap_vout_device *vout)
-{
-	return (vout->rotation == dss_rotation_90_degree ||
-			vout->rotation == dss_rotation_270_degree);
-}
-
-/*
- * Return true if rotation is enabled
- */
-static inline int rotation_enabled(const struct omap_vout_device *vout)
-{
-	return vout->rotation || vout->mirror;
-}
-
-/*
- * Reverse the rotation degree if mirroring is enabled
- */
-static inline int calc_rotation(const struct omap_vout_device *vout)
-{
-	if (!vout->mirror)
-		return vout->rotation;
-
-	switch (vout->rotation) {
-	case dss_rotation_90_degree:
-		return dss_rotation_270_degree;
-	case dss_rotation_270_degree:
-		return dss_rotation_90_degree;
-	case dss_rotation_180_degree:
-		return dss_rotation_0_degree;
-	default:
-		return dss_rotation_180_degree;
-	}
-}
-
-/*
  * Free the V4L2 buffers
  */
-static void omap_vout_free_buffers(struct omap_vout_device *vout)
+void omap_vout_free_buffers(struct omap_vout_device *vout)
 {
 	int i, numbuffers;
 
@@ -425,52 +256,6 @@ static void omap_vout_free_buffers(struct omap_vout_device *vout)
 }
 
 /*
- * Free VRFB buffers
- */
-static void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout)
-{
-	int j;
-
-	for (j = 0; j < VRFB_NUM_BUFS; j++) {
-		omap_vout_free_buffer(vout->smsshado_virt_addr[j],
-				vout->smsshado_size);
-		vout->smsshado_virt_addr[j] = 0;
-		vout->smsshado_phy_addr[j] = 0;
-	}
-}
-
-/*
- * Allocate the buffers for the VRFB space.  Data is copied from V4L2
- * buffers to the VRFB buffers using the DMA engine.
- */
-static int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
-			  unsigned int *count, unsigned int startindex)
-{
-	int i;
-	bool yuv_mode;
-
-	/* Allocate the VRFB buffers only if the buffers are not
-	 * allocated during init time.
-	 */
-	if ((rotation_enabled(vout)) && !vout->vrfb_static_allocation)
-		if (omap_vout_allocate_vrfb_buffers(vout, count, startindex))
-			return -ENOMEM;
-
-	if (vout->dss_mode == OMAP_DSS_COLOR_YUV2 ||
-			vout->dss_mode == OMAP_DSS_COLOR_UYVY)
-		yuv_mode = true;
-	else
-		yuv_mode = false;
-
-	for (i = 0; i < *count; i++)
-		omap_vrfb_setup(&vout->vrfb_context[i],
-				vout->smsshado_phy_addr[i], vout->pix.width,
-				vout->pix.height, vout->bpp, yuv_mode);
-
-	return 0;
-}
-
-/*
  * Convert V4L2 rotation to DSS rotation
  *	V4L2 understand 0, 90, 180, 270.
  *	Convert to 0, 1, 2 and 3 respectively for DSS
@@ -499,124 +284,38 @@ static int v4l2_rot_to_dss_rot(int v4l2_rotation,
 	return ret;
 }
 
-/*
- * Calculate the buffer offsets from which the streaming should
- * start. This offset calculation is mainly required because of
- * the VRFB 32 pixels alignment with rotation.
- */
 static int omap_vout_calculate_offset(struct omap_vout_device *vout)
 {
-	struct omap_overlay *ovl;
-	enum dss_rotation rotation;
 	struct omapvideo_info *ovid;
-	bool mirroring = vout->mirror;
-	struct omap_dss_device *cur_display;
 	struct v4l2_rect *crop = &vout->crop;
 	struct v4l2_pix_format *pix = &vout->pix;
 	int *cropped_offset = &vout->cropped_offset;
-	int vr_ps = 1, ps = 2, temp_ps = 2;
-	int offset = 0, ctop = 0, cleft = 0, line_length = 0;
+	int ps = 2, line_length = 0;
 
 	ovid = &vout->vid_info;
-	ovl = ovid->overlays[0];
-	/* get the display device attached to the overlay */
-	if (!ovl->manager || !ovl->manager->device)
-		return -1;
 
-	cur_display = ovl->manager->device;
-	rotation = calc_rotation(vout);
+	if (ovid->rotation_type == VOUT_ROT_VRFB) {
+		omap_vout_calculate_vrfb_offset(vout);
+	} else {
+		vout->line_length = line_length = pix->width;
 
-	if (V4L2_PIX_FMT_YUYV == pix->pixelformat ||
-			V4L2_PIX_FMT_UYVY == pix->pixelformat) {
-		if (rotation_enabled(vout)) {
-			/*
-			 * ps    - Actual pixel size for YUYV/UYVY for
-			 *         VRFB/Mirroring is 4 bytes
-			 * vr_ps - Virtually pixel size for YUYV/UYVY is
-			 *         2 bytes
-			 */
+		if (V4L2_PIX_FMT_YUYV == pix->pixelformat ||
+			V4L2_PIX_FMT_UYVY == pix->pixelformat)
+			ps = 2;
+		else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat)
 			ps = 4;
-			vr_ps = 2;
-		} else {
-			ps = 2;	/* otherwise the pixel size is 2 byte */
-		}
-	} else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat) {
-		ps = 4;
-	} else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat) {
-		ps = 3;
-	}
-	vout->ps = ps;
-	vout->vr_ps = vr_ps;
-
-	if (rotation_enabled(vout)) {
-		line_length = MAX_PIXELS_PER_LINE;
-		ctop = (pix->height - crop->height) - crop->top;
-		cleft = (pix->width - crop->width) - crop->left;
-	} else {
-		line_length = pix->width;
-	}
-	vout->line_length = line_length;
-	switch (rotation) {
-	case dss_rotation_90_degree:
-		offset = vout->vrfb_context[0].yoffset *
-			vout->vrfb_context[0].bytespp;
-		temp_ps = ps / vr_ps;
-		if (mirroring == 0) {
-			*cropped_offset = offset + line_length *
-				temp_ps * cleft + crop->top * temp_ps;
-		} else {
-			*cropped_offset = offset + line_length * temp_ps *
-				cleft + crop->top * temp_ps + (line_length *
-				((crop->width / (vr_ps)) - 1) * ps);
-		}
-		break;
-	case dss_rotation_180_degree:
-		offset = ((MAX_PIXELS_PER_LINE * vout->vrfb_context[0].yoffset *
-			vout->vrfb_context[0].bytespp) +
-			(vout->vrfb_context[0].xoffset *
-			vout->vrfb_context[0].bytespp));
-		if (mirroring == 0) {
-			*cropped_offset = offset + (line_length * ps * ctop) +
-				(cleft / vr_ps) * ps;
+		else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat)
+			ps = 3;
 
-		} else {
-			*cropped_offset = offset + (line_length * ps * ctop) +
-				(cleft / vr_ps) * ps + (line_length *
-				(crop->height - 1) * ps);
-		}
-		break;
-	case dss_rotation_270_degree:
-		offset = MAX_PIXELS_PER_LINE * vout->vrfb_context[0].xoffset *
-			vout->vrfb_context[0].bytespp;
-		temp_ps = ps / vr_ps;
-		if (mirroring == 0) {
-			*cropped_offset = offset + line_length *
-			    temp_ps * crop->left + ctop * ps;
-		} else {
-			*cropped_offset = offset + line_length *
-				temp_ps * crop->left + ctop * ps +
-				(line_length * ((crop->width / vr_ps) - 1) *
-				 ps);
-		}
-		break;
-	case dss_rotation_0_degree:
-		if (mirroring == 0) {
-			*cropped_offset = (line_length * ps) *
-				crop->top + (crop->left / vr_ps) * ps;
-		} else {
-			*cropped_offset = (line_length * ps) *
-				crop->top + (crop->left / vr_ps) * ps +
-				(line_length * (crop->height - 1) * ps);
-		}
-		break;
-	default:
-		*cropped_offset = (line_length * ps * crop->top) /
-			vr_ps + (crop->left * ps) / vr_ps +
-			((crop->width / vr_ps) - 1) * ps;
-		break;
+		vout->ps = ps;
+
+		*cropped_offset = (line_length * ps) *
+			crop->top + crop->left * ps;
 	}
+
 	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "%s Offset:%x\n",
-			__func__, *cropped_offset);
+			__func__, vout->cropped_offset);
+
 	return 0;
 }
 
@@ -664,7 +363,7 @@ static int video_mode_to_dss_mode(struct omap_vout_device *vout)
 /*
  * Setup the overlay
  */
-int omapvid_setup_overlay(struct omap_vout_device *vout,
+static int omapvid_setup_overlay(struct omap_vout_device *vout,
 		struct omap_overlay *ovl, int posx, int posy, int outw,
 		int outh, u32 addr)
 {
@@ -687,7 +386,7 @@ int omapvid_setup_overlay(struct omap_vout_device *vout,
 	/* Setup the input plane parameters according to
 	 * rotation value selected.
 	 */
-	if (rotate_90_or_270(vout)) {
+	if (is_rotation_90_or_270(vout)) {
 		cropheight = vout->crop.width;
 		cropwidth = vout->crop.height;
 		pixheight = vout->pix.width;
@@ -711,7 +410,7 @@ int omapvid_setup_overlay(struct omap_vout_device *vout,
 	info.out_width = outw;
 	info.out_height = outh;
 	info.global_alpha = vout->win.global_alpha;
-	if (!rotation_enabled(vout)) {
+	if (!is_rotation_enabled(vout)) {
 		info.rotation = 0;
 		info.rotation_type = OMAP_DSS_ROT_DMA;
 		info.screen_width = pixwidth;
@@ -744,7 +443,7 @@ setup_ovl_err:
 /*
  * Initialize the overlay structure
  */
-int omapvid_init(struct omap_vout_device *vout, u32 addr)
+static int omapvid_init(struct omap_vout_device *vout, u32 addr)
 {
 	int ret = 0, i;
 	struct v4l2_window *win;
@@ -809,7 +508,7 @@ omapvid_init_err:
 /*
  * Apply the changes set the go bit of DSS
  */
-int omapvid_apply_changes(struct omap_vout_device *vout)
+static int omapvid_apply_changes(struct omap_vout_device *vout)
 {
 	int i;
 	struct omap_overlay *ovl;
@@ -825,7 +524,7 @@ int omapvid_apply_changes(struct omap_vout_device *vout)
 	return 0;
 }
 
-void omap_vout_isr(void *arg, unsigned int irqstatus)
+static void omap_vout_isr(void *arg, unsigned int irqstatus)
 {
 	int ret;
 	u32 addr, fid;
@@ -848,10 +547,20 @@ void omap_vout_isr(void *arg, unsigned int irqstatus)
 
 	spin_lock(&vout->vbq_lock);
 	do_gettimeofday(&timevalue);
-	if (cur_display->type == OMAP_DISPLAY_TYPE_DPI) {
-		if (!(irqstatus & DISPC_IRQ_VSYNC))
-			goto vout_isr_err;
 
+	if (cur_display->type != OMAP_DISPLAY_TYPE_VENC) {
+		switch (cur_display->type) {
+		case OMAP_DISPLAY_TYPE_DPI:
+			if (!(irqstatus & (DISPC_IRQ_VSYNC | DISPC_IRQ_VSYNC2)))
+				goto vout_isr_err;
+			break;
+		case OMAP_DISPLAY_TYPE_HDMI:
+			if (!(irqstatus & DISPC_IRQ_EVSYNC_EVEN))
+				goto vout_isr_err;
+			break;
+		default:
+			goto vout_isr_err;
+		}
 		if (!vout->first_int && (vout->cur_frm != vout->next_frm)) {
 			vout->cur_frm->ts = timevalue;
 			vout->cur_frm->state = VIDEOBUF_DONE;
@@ -875,7 +584,7 @@ void omap_vout_isr(void *arg, unsigned int irqstatus)
 		ret = omapvid_init(vout, addr);
 		if (ret)
 			printk(KERN_ERR VOUT_NAME
-					"failed to set overlay info\n");
+				"failed to set overlay info\n");
 		/* Enable the pipeline and set the Go bit */
 		ret = omapvid_apply_changes(vout);
 		if (ret)
@@ -954,6 +663,7 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 	int startindex = 0, i, j;
 	u32 phy_addr = 0, virt_addr = 0;
 	struct omap_vout_device *vout = q->priv_data;
+	struct omapvideo_info *ovid = &vout->vid_info;
 
 	if (!vout)
 		return -EINVAL;
@@ -966,13 +676,10 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 	if (V4L2_MEMORY_MMAP == vout->memory && *count < startindex)
 		*count = startindex;
 
-	if ((rotation_enabled(vout)) && *count > VRFB_NUM_BUFS)
-		*count = VRFB_NUM_BUFS;
-
-	/* If rotation is enabled, allocate memory for VRFB space also */
-	if (rotation_enabled(vout))
+	if (ovid->rotation_type == VOUT_ROT_VRFB) {
 		if (omap_vout_vrfb_buffer_setup(vout, count, startindex))
 			return -ENOMEM;
+	}
 
 	if (V4L2_MEMORY_MMAP != vout->memory)
 		return 0;
@@ -996,8 +703,11 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 		virt_addr = omap_vout_alloc_buffer(vout->buffer_size,
 				&phy_addr);
 		if (!virt_addr) {
-			if (!rotation_enabled(vout))
+			if (ovid->rotation_type == VOUT_ROT_NONE) {
 				break;
+			} else {
+				if (!is_rotation_enabled(vout))
+					break;
 			/* Free the VRFB buffers if no space for V4L2 buffers */
 			for (j = i; j < *count; j++) {
 				omap_vout_free_buffer(
@@ -1005,6 +715,7 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 						vout->smsshado_size);
 				vout->smsshado_virt_addr[j] = 0;
 				vout->smsshado_phy_addr[j] = 0;
+				}
 			}
 		}
 		vout->buf_virt_addr[i] = virt_addr;
@@ -1017,9 +728,9 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 
 /*
  * Free the V4L2 buffers additionally allocated than default
- * number of buffers and free all the VRFB buffers
+ * number of buffers
  */
-static void omap_vout_free_allbuffers(struct omap_vout_device *vout)
+static void omap_vout_free_extra_buffers(struct omap_vout_device *vout)
 {
 	int num_buffers = 0, i;
 
@@ -1034,20 +745,6 @@ static void omap_vout_free_allbuffers(struct omap_vout_device *vout)
 		vout->buf_virt_addr[i] = 0;
 		vout->buf_phy_addr[i] = 0;
 	}
-	/* Free the VRFB buffers only if they are allocated
-	 * during reqbufs.  Don't free if init time allocated
-	 */
-	if (!vout->vrfb_static_allocation) {
-		for (i = 0; i < VRFB_NUM_BUFS; i++) {
-			if (vout->smsshado_virt_addr[i]) {
-				omap_vout_free_buffer(
-						vout->smsshado_virt_addr[i],
-						vout->smsshado_size);
-				vout->smsshado_virt_addr[i] = 0;
-				vout->smsshado_phy_addr[i] = 0;
-			}
-		}
-	}
 	vout->buffer_allocated = num_buffers;
 }
 
@@ -1059,16 +756,11 @@ static void omap_vout_free_allbuffers(struct omap_vout_device *vout)
  * buffer into VRFB memory space before giving it to the DSS.
  */
 static int omap_vout_buffer_prepare(struct videobuf_queue *q,
-			    struct videobuf_buffer *vb,
-			    enum v4l2_field field)
+			struct videobuf_buffer *vb,
+			enum v4l2_field field)
 {
-	dma_addr_t dmabuf;
-	struct vid_vrfb_dma *tx;
-	enum dss_rotation rotation;
 	struct omap_vout_device *vout = q->priv_data;
-	u32 dest_frame_index = 0, src_element_index = 0;
-	u32 dest_element_index = 0, src_frame_index = 0;
-	u32 elem_count = 0, frame_count = 0, pixsize = 2;
+	struct omapvideo_info *ovid = &vout->vid_info;
 
 	if (VIDEOBUF_NEEDS_INIT == vb->state) {
 		vb->width = vout->pix.width;
@@ -1087,66 +779,24 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q,
 		vout->queued_buf_addr[vb->i] = (u8 *)
 			omap_vout_uservirt_to_phys(vb->baddr);
 	} else {
-		vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i];
-	}
+		u32 addr, dma_addr;
+		unsigned long size;
 
-	if (!rotation_enabled(vout))
-		return 0;
+		addr = (unsigned long) vout->buf_virt_addr[vb->i];
+		size = (unsigned long) vb->size;
 
-	dmabuf = vout->buf_phy_addr[vb->i];
-	/* If rotation is enabled, copy input buffer into VRFB
-	 * memory space using DMA. We are copying input buffer
-	 * into VRFB memory space of desired angle and DSS will
-	 * read image VRFB memory for 0 degree angle
-	 */
-	pixsize = vout->bpp * vout->vrfb_bpp;
-	/*
-	 * DMA transfer in double index mode
-	 */
+		dma_addr = dma_map_single(vout->vid_dev->v4l2_dev.dev, (void *) addr,
+				size, DMA_TO_DEVICE);
+		if (dma_mapping_error(vout->vid_dev->v4l2_dev.dev, dma_addr))
+			v4l2_err(&vout->vid_dev->v4l2_dev, "dma_map_single failed\n");
 
-	/* Frame index */
-	dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) -
-			(vout->pix.width * vout->bpp)) + 1;
-
-	/* Source and destination parameters */
-	src_element_index = 0;
-	src_frame_index = 0;
-	dest_element_index = 1;
-	/* Number of elements per frame */
-	elem_count = vout->pix.width * vout->bpp;
-	frame_count = vout->pix.height;
-	tx = &vout->vrfb_dma_tx;
-	tx->tx_status = 0;
-	omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32,
-			(elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT,
-			tx->dev_id, 0x0);
-	/* src_port required only for OMAP1 */
-	omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
-			dmabuf, src_element_index, src_frame_index);
-	/*set dma source burst mode for VRFB */
-	omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
-	rotation = calc_rotation(vout);
-
-	/* dest_port required only for OMAP1 */
-	omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX,
-			vout->vrfb_context[vb->i].paddr[0], dest_element_index,
-			dest_frame_index);
-	/*set dma dest burst mode for VRFB */
-	omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
-	omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0);
-
-	omap_start_dma(tx->dma_ch);
-	interruptible_sleep_on_timeout(&tx->wait, VRFB_TX_TIMEOUT);
-
-	if (tx->tx_status == 0) {
-		omap_stop_dma(tx->dma_ch);
-		return -EINVAL;
+		vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i];
 	}
-	/* Store buffers physical address into an array. Addresses
-	 * from this array will be used to configure DSS */
-	vout->queued_buf_addr[vb->i] = (u8 *)
-		vout->vrfb_context[vb->i].paddr[rotation];
-	return 0;
+
+	if (ovid->rotation_type == VOUT_ROT_VRFB)
+		return omap_vout_prepare_vrfb(vout, vb);
+	else
+		return 0;
 }
 
 /*
@@ -1298,7 +948,15 @@ static int omap_vout_release(struct file *file)
 				"Unable to apply changes\n");
 
 	/* Free all buffers */
-	omap_vout_free_allbuffers(vout);
+	omap_vout_free_extra_buffers(vout);
+
+	/* Free the VRFB buffers only if they are allocated
+	 * during reqbufs.  Don't free if init time allocated
+	 */
+	if (ovid->rotation_type == VOUT_ROT_VRFB) {
+		if (!vout->vrfb_static_allocation)
+			omap_vout_free_vrfb_buffers(vout);
+	}
 	videobuf_mmap_free(q);
 
 	/* Even if apply changes fails we should continue
@@ -1307,7 +965,7 @@ static int omap_vout_release(struct file *file)
 		u32 mask = 0;
 
 		mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN |
-			DISPC_IRQ_EVSYNC_ODD;
+			DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_VSYNC2;
 		omap_dispc_unregister_isr(omap_vout_isr, vout, mask);
 		vout->streaming = 0;
 
@@ -1383,10 +1041,7 @@ static int vidioc_enum_fmt_vid_out(struct file *file, void *fh,
 			struct v4l2_fmtdesc *fmt)
 {
 	int index = fmt->index;
-	enum v4l2_buf_type type = fmt->type;
 
-	fmt->index = index;
-	fmt->type = type;
 	if (index >= NUM_OUTPUT_FORMATS)
 		return -EINVAL;
 
@@ -1457,7 +1112,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh,
 
 	/* We dont support RGB24-packed mode if vrfb rotation
 	 * is enabled*/
-	if ((rotation_enabled(vout)) &&
+	if ((is_rotation_enabled(vout)) &&
 			f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) {
 		ret = -EINVAL;
 		goto s_fmt_vid_out_exit;
@@ -1465,7 +1120,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh,
 
 	/* get the framebuffer parameters */
 
-	if (rotate_90_or_270(vout)) {
+	if (is_rotation_90_or_270(vout)) {
 		vout->fbuf.fmt.height = timing->x_res;
 		vout->fbuf.fmt.width = timing->y_res;
 	} else {
@@ -1555,10 +1210,7 @@ static int vidioc_enum_fmt_vid_overlay(struct file *file, void *fh,
 			struct v4l2_fmtdesc *fmt)
 {
 	int index = fmt->index;
-	enum v4l2_buf_type type = fmt->type;
 
-	fmt->index = index;
-	fmt->type = type;
 	if (index >= NUM_OUTPUT_FORMATS)
 		return -EINVAL;
 
@@ -1645,7 +1297,7 @@ static int vidioc_s_crop(struct file *file, void *fh, struct v4l2_crop *crop)
 	/* get the display device attached to the overlay */
 	timing = &ovl->manager->device->panel.timings;
 
-	if (rotate_90_or_270(vout)) {
+	if (is_rotation_90_or_270(vout)) {
 		vout->fbuf.fmt.height = timing->x_res;
 		vout->fbuf.fmt.width = timing->y_res;
 	} else {
@@ -1725,9 +1377,17 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *a)
 	switch (a->id) {
 	case V4L2_CID_ROTATE:
 	{
+		struct omapvideo_info *ovid;
 		int rotation = a->value;
 
+		ovid = &vout->vid_info;
+
 		mutex_lock(&vout->lock);
+		if (rotation && ovid->rotation_type == VOUT_ROT_NONE) {
+			mutex_unlock(&vout->lock);
+			ret = -ERANGE;
+			break;
+		}
 
 		if (rotation && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) {
 			mutex_unlock(&vout->lock);
@@ -1783,6 +1443,11 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *a)
 		ovl = ovid->overlays[0];
 
 		mutex_lock(&vout->lock);
+		if (mirror && ovid->rotation_type == VOUT_ROT_NONE) {
+			mutex_unlock(&vout->lock);
+			ret = -ERANGE;
+			break;
+		}
 
 		if (mirror  && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) {
 			mutex_unlock(&vout->lock);
@@ -1893,7 +1558,7 @@ static int vidioc_qbuf(struct file *file, void *fh,
 		}
 	}
 
-	if ((rotation_enabled(vout)) &&
+	if ((is_rotation_enabled(vout)) &&
 			vout->vrfb_dma_tx.req_status == DMA_CHAN_NOT_ALLOTED) {
 		v4l2_warn(&vout->vid_dev->v4l2_dev,
 				"DMA Channel not allocated for Rotation\n");
@@ -1908,15 +1573,28 @@ static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
 	struct omap_vout_device *vout = fh;
 	struct videobuf_queue *q = &vout->vbq;
 
+	int ret;
+	u32 addr;
+	unsigned long size;
+	struct videobuf_buffer *vb;
+
+	vb = q->bufs[b->index];
+
 	if (!vout->streaming)
 		return -EINVAL;
 
 	if (file->f_flags & O_NONBLOCK)
 		/* Call videobuf_dqbuf for non blocking mode */
-		return videobuf_dqbuf(q, (struct v4l2_buffer *)b, 1);
+		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 1);
 	else
 		/* Call videobuf_dqbuf for  blocking mode */
-		return videobuf_dqbuf(q, (struct v4l2_buffer *)b, 0);
+		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 0);
+
+	addr = (unsigned long) vout->buf_phy_addr[vb->i];
+	size = (unsigned long) vb->size;
+	dma_unmap_single(vout->vid_dev->v4l2_dev.dev,  addr,
+				size, DMA_TO_DEVICE);
+	return ret;
 }
 
 static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i)
@@ -1965,7 +1643,8 @@ static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i)
 	addr = (unsigned long) vout->queued_buf_addr[vout->cur_frm->i]
 		+ vout->cropped_offset;
 
-	mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD;
+	mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD
+		| DISPC_IRQ_VSYNC2;
 
 	omap_dispc_register_isr(omap_vout_isr, vout, mask);
 
@@ -2015,7 +1694,8 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i)
 		return -EINVAL;
 
 	vout->streaming = 0;
-	mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD;
+	mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD
+		| DISPC_IRQ_VSYNC2;
 
 	omap_dispc_unregister_isr(omap_vout_isr, vout, mask);
 
@@ -2228,7 +1908,8 @@ static int __init omap_vout_setup_video_data(struct omap_vout_device *vout)
 	vout->mirror = 0;
 	vout->control[2].id = V4L2_CID_HFLIP;
 	vout->control[2].value = 0;
-	vout->vrfb_bpp = 2;
+	if (vout->vid_info.rotation_type == VOUT_ROT_VRFB)
+		vout->vrfb_bpp = 2;
 
 	control[1].id = V4L2_CID_BG_COLOR;
 	control[1].value = 0;
@@ -2260,17 +1941,15 @@ static int __init omap_vout_setup_video_bufs(struct platform_device *pdev,
 		int vid_num)
 {
 	u32 numbuffers;
-	int ret = 0, i, j;
-	int image_width, image_height;
-	struct video_device *vfd;
+	int ret = 0, i;
+	struct omapvideo_info *ovid;
 	struct omap_vout_device *vout;
-	int static_vrfb_allocation = 0, vrfb_num_bufs = VRFB_NUM_BUFS;
 	struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
 	struct omap2video_device *vid_dev =
 		container_of(v4l2_dev, struct omap2video_device, v4l2_dev);
 
 	vout = vid_dev->vouts[vid_num];
-	vfd = vout->vfd;
+	ovid = &vout->vid_info;
 
 	numbuffers = (vid_num == 0) ? video1_numbuffers : video2_numbuffers;
 	vout->buffer_size = (vid_num == 0) ? video1_bufsize : video2_bufsize;
@@ -2287,66 +1966,16 @@ static int __init omap_vout_setup_video_bufs(struct platform_device *pdev,
 		}
 	}
 
-	for (i = 0; i < VRFB_NUM_BUFS; i++) {
-		if (omap_vrfb_request_ctx(&vout->vrfb_context[i])) {
-			dev_info(&pdev->dev, ": VRFB allocation failed\n");
-			for (j = 0; j < i; j++)
-				omap_vrfb_release_ctx(&vout->vrfb_context[j]);
-			ret = -ENOMEM;
-			goto free_buffers;
-		}
-	}
 	vout->cropped_offset = 0;
 
-	/* Calculate VRFB memory size */
-	/* allocate for worst case size */
-	image_width = VID_MAX_WIDTH / TILE_SIZE;
-	if (VID_MAX_WIDTH % TILE_SIZE)
-		image_width++;
-
-	image_width = image_width * TILE_SIZE;
-	image_height = VID_MAX_HEIGHT / TILE_SIZE;
-
-	if (VID_MAX_HEIGHT % TILE_SIZE)
-		image_height++;
-
-	image_height = image_height * TILE_SIZE;
-	vout->smsshado_size = PAGE_ALIGN(image_width * image_height * 2 * 2);
-
-	/*
-	 * Request and Initialize DMA, for DMA based VRFB transfer
-	 */
-	vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE;
-	vout->vrfb_dma_tx.dma_ch = -1;
-	vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED;
-	ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX",
-			omap_vout_vrfb_dma_tx_callback,
-			(void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch);
-	if (ret < 0) {
-		vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
-		dev_info(&pdev->dev, ": failed to allocate DMA Channel for"
-				" video%d\n", vfd->minor);
-	}
-	init_waitqueue_head(&vout->vrfb_dma_tx.wait);
-
-	/* Allocate VRFB buffers if selected through bootargs */
-	static_vrfb_allocation = (vid_num == 0) ?
-		vid1_static_vrfb_alloc : vid2_static_vrfb_alloc;
-
-	/* statically allocated the VRFB buffer is done through
-	   commands line aruments */
-	if (static_vrfb_allocation) {
-		if (omap_vout_allocate_vrfb_buffers(vout, &vrfb_num_bufs, -1)) {
-			ret =  -ENOMEM;
-			goto release_vrfb_ctx;
-		}
-		vout->vrfb_static_allocation = 1;
+	if (ovid->rotation_type == VOUT_ROT_VRFB) {
+		int static_vrfb_allocation = (vid_num == 0) ?
+			vid1_static_vrfb_alloc : vid2_static_vrfb_alloc;
+		ret = omap_vout_setup_vrfb_bufs(pdev, vid_num,
+				static_vrfb_allocation);
 	}
-	return 0;
 
-release_vrfb_ctx:
-	for (j = 0; j < VRFB_NUM_BUFS; j++)
-		omap_vrfb_release_ctx(&vout->vrfb_context[j]);
+	return ret;
 
 free_buffers:
 	for (i = 0; i < numbuffers; i++) {
@@ -2389,6 +2018,10 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
 		vout->vid_info.num_overlays = 1;
 		vout->vid_info.id = k + 1;
 
+		/* Set VRFB as rotation_type for omap2 and omap3 */
+		if (cpu_is_omap24xx() || cpu_is_omap34xx())
+			vout->vid_info.rotation_type = VOUT_ROT_VRFB;
+
 		/* Setup the default configuration for the video devices
 		 */
 		if (omap_vout_setup_video_data(vout) != 0) {
@@ -2422,7 +2055,8 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
 			goto success;
 
 error2:
-		omap_vout_release_vrfb(vout);
+		if (vout->vid_info.rotation_type == VOUT_ROT_VRFB)
+			omap_vout_release_vrfb(vout);
 		omap_vout_free_buffers(vout);
 error1:
 		video_device_release(vfd);
@@ -2443,11 +2077,13 @@ success:
 static void omap_vout_cleanup_device(struct omap_vout_device *vout)
 {
 	struct video_device *vfd;
+	struct omapvideo_info *ovid;
 
 	if (!vout)
 		return;
 
 	vfd = vout->vfd;
+	ovid = &vout->vid_info;
 	if (vfd) {
 		if (!video_is_registered(vfd)) {
 			/*
@@ -2463,14 +2099,15 @@ static void omap_vout_cleanup_device(struct omap_vout_device *vout)
 			video_unregister_device(vfd);
 		}
 	}
-
-	omap_vout_release_vrfb(vout);
+	if (ovid->rotation_type == VOUT_ROT_VRFB) {
+		omap_vout_release_vrfb(vout);
+		/* Free the VRFB buffer if allocated
+		 * init time
+		 */
+		if (vout->vrfb_static_allocation)
+			omap_vout_free_vrfb_buffers(vout);
+	}
 	omap_vout_free_buffers(vout);
-	/* Free the VRFB buffer if allocated
-	 * init time
-	 */
-	if (vout->vrfb_static_allocation)
-		omap_vout_free_vrfb_buffers(vout);
 
 	kfree(vout);
 }
diff --git a/drivers/media/video/omap/omap_vout_vrfb.c b/drivers/media/video/omap/omap_vout_vrfb.c
new file mode 100644
index 0000000..ebebcac4
--- /dev/null
+++ b/drivers/media/video/omap/omap_vout_vrfb.c
@@ -0,0 +1,390 @@
+/*
+ * omap_vout_vrfb.c
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+
+#include <media/videobuf-dma-contig.h>
+#include <media/v4l2-device.h>
+
+#include <plat/dma.h>
+#include <plat/vrfb.h>
+
+#include "omap_voutdef.h"
+#include "omap_voutlib.h"
+
+/*
+ * Function for allocating video buffers
+ */
+static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout,
+		unsigned int *count, int startindex)
+{
+	int i, j;
+
+	for (i = 0; i < *count; i++) {
+		if (!vout->smsshado_virt_addr[i]) {
+			vout->smsshado_virt_addr[i] =
+				omap_vout_alloc_buffer(vout->smsshado_size,
+						&vout->smsshado_phy_addr[i]);
+		}
+		if (!vout->smsshado_virt_addr[i] && startindex != -1) {
+			if (V4L2_MEMORY_MMAP == vout->memory && i >= startindex)
+				break;
+		}
+		if (!vout->smsshado_virt_addr[i]) {
+			for (j = 0; j < i; j++) {
+				omap_vout_free_buffer(
+						vout->smsshado_virt_addr[j],
+						vout->smsshado_size);
+				vout->smsshado_virt_addr[j] = 0;
+				vout->smsshado_phy_addr[j] = 0;
+			}
+			*count = 0;
+			return -ENOMEM;
+		}
+		memset((void *) vout->smsshado_virt_addr[i], 0,
+				vout->smsshado_size);
+	}
+	return 0;
+}
+
+/*
+ * Wakes up the application once the DMA transfer to VRFB space is completed.
+ */
+static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void *data)
+{
+	struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data;
+
+	t->tx_status = 1;
+	wake_up_interruptible(&t->wait);
+}
+
+/*
+ * Free VRFB buffers
+ */
+void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout)
+{
+	int j;
+
+	for (j = 0; j < VRFB_NUM_BUFS; j++) {
+		omap_vout_free_buffer(vout->smsshado_virt_addr[j],
+				vout->smsshado_size);
+		vout->smsshado_virt_addr[j] = 0;
+		vout->smsshado_phy_addr[j] = 0;
+	}
+}
+
+int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
+			u32 static_vrfb_allocation)
+{
+	int ret = 0, i, j;
+	struct omap_vout_device *vout;
+	struct video_device *vfd;
+	int image_width, image_height;
+	int vrfb_num_bufs = VRFB_NUM_BUFS;
+	struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
+	struct omap2video_device *vid_dev =
+		container_of(v4l2_dev, struct omap2video_device, v4l2_dev);
+
+	vout = vid_dev->vouts[vid_num];
+	vfd = vout->vfd;
+
+	for (i = 0; i < VRFB_NUM_BUFS; i++) {
+		if (omap_vrfb_request_ctx(&vout->vrfb_context[i])) {
+			dev_info(&pdev->dev, ": VRFB allocation failed\n");
+			for (j = 0; j < i; j++)
+				omap_vrfb_release_ctx(&vout->vrfb_context[j]);
+			ret = -ENOMEM;
+			goto free_buffers;
+		}
+	}
+
+	/* Calculate VRFB memory size */
+	/* allocate for worst case size */
+	image_width = VID_MAX_WIDTH / TILE_SIZE;
+	if (VID_MAX_WIDTH % TILE_SIZE)
+		image_width++;
+
+	image_width = image_width * TILE_SIZE;
+	image_height = VID_MAX_HEIGHT / TILE_SIZE;
+
+	if (VID_MAX_HEIGHT % TILE_SIZE)
+		image_height++;
+
+	image_height = image_height * TILE_SIZE;
+	vout->smsshado_size = PAGE_ALIGN(image_width * image_height * 2 * 2);
+
+	/*
+	 * Request and Initialize DMA, for DMA based VRFB transfer
+	 */
+	vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE;
+	vout->vrfb_dma_tx.dma_ch = -1;
+	vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED;
+	ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX",
+			omap_vout_vrfb_dma_tx_callback,
+			(void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch);
+	if (ret < 0) {
+		vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
+		dev_info(&pdev->dev, ": failed to allocate DMA Channel for"
+				" video%d\n", vfd->minor);
+	}
+	init_waitqueue_head(&vout->vrfb_dma_tx.wait);
+
+	/* statically allocated the VRFB buffer is done through
+	   commands line aruments */
+	if (static_vrfb_allocation) {
+		if (omap_vout_allocate_vrfb_buffers(vout, &vrfb_num_bufs, -1)) {
+			ret =  -ENOMEM;
+			goto release_vrfb_ctx;
+		}
+		vout->vrfb_static_allocation = 1;
+	}
+	return 0;
+
+release_vrfb_ctx:
+	for (j = 0; j < VRFB_NUM_BUFS; j++)
+		omap_vrfb_release_ctx(&vout->vrfb_context[j]);
+free_buffers:
+	omap_vout_free_buffers(vout);
+
+	return ret;
+}
+
+/*
+ * Release the VRFB context once the module exits
+ */
+void omap_vout_release_vrfb(struct omap_vout_device *vout)
+{
+	int i;
+
+	for (i = 0; i < VRFB_NUM_BUFS; i++)
+		omap_vrfb_release_ctx(&vout->vrfb_context[i]);
+
+	if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) {
+		vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
+		omap_free_dma(vout->vrfb_dma_tx.dma_ch);
+	}
+}
+
+/*
+ * Allocate the buffers for the VRFB space.  Data is copied from V4L2
+ * buffers to the VRFB buffers using the DMA engine.
+ */
+int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
+			  unsigned int *count, unsigned int startindex)
+{
+	int i;
+	bool yuv_mode;
+
+	if (!is_rotation_enabled(vout))
+		return 0;
+
+	/* If rotation is enabled, allocate memory for VRFB space also */
+	*count = *count > VRFB_NUM_BUFS ? VRFB_NUM_BUFS : *count;
+
+	/* Allocate the VRFB buffers only if the buffers are not
+	 * allocated during init time.
+	 */
+	if (!vout->vrfb_static_allocation)
+		if (omap_vout_allocate_vrfb_buffers(vout, count, startindex))
+			return -ENOMEM;
+
+	if (vout->dss_mode == OMAP_DSS_COLOR_YUV2 ||
+			vout->dss_mode == OMAP_DSS_COLOR_UYVY)
+		yuv_mode = true;
+	else
+		yuv_mode = false;
+
+	for (i = 0; i < *count; i++)
+		omap_vrfb_setup(&vout->vrfb_context[i],
+				vout->smsshado_phy_addr[i], vout->pix.width,
+				vout->pix.height, vout->bpp, yuv_mode);
+
+	return 0;
+}
+
+int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
+				struct videobuf_buffer *vb)
+{
+	dma_addr_t dmabuf;
+	struct vid_vrfb_dma *tx;
+	enum dss_rotation rotation;
+	u32 dest_frame_index = 0, src_element_index = 0;
+	u32 dest_element_index = 0, src_frame_index = 0;
+	u32 elem_count = 0, frame_count = 0, pixsize = 2;
+
+	if (!is_rotation_enabled(vout))
+		return 0;
+
+	dmabuf = vout->buf_phy_addr[vb->i];
+	/* If rotation is enabled, copy input buffer into VRFB
+	 * memory space using DMA. We are copying input buffer
+	 * into VRFB memory space of desired angle and DSS will
+	 * read image VRFB memory for 0 degree angle
+	 */
+	pixsize = vout->bpp * vout->vrfb_bpp;
+	/*
+	 * DMA transfer in double index mode
+	 */
+
+	/* Frame index */
+	dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) -
+			(vout->pix.width * vout->bpp)) + 1;
+
+	/* Source and destination parameters */
+	src_element_index = 0;
+	src_frame_index = 0;
+	dest_element_index = 1;
+	/* Number of elements per frame */
+	elem_count = vout->pix.width * vout->bpp;
+	frame_count = vout->pix.height;
+	tx = &vout->vrfb_dma_tx;
+	tx->tx_status = 0;
+	omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32,
+			(elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT,
+			tx->dev_id, 0x0);
+	/* src_port required only for OMAP1 */
+	omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
+			dmabuf, src_element_index, src_frame_index);
+	/*set dma source burst mode for VRFB */
+	omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
+	rotation = calc_rotation(vout);
+
+	/* dest_port required only for OMAP1 */
+	omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX,
+			vout->vrfb_context[vb->i].paddr[0], dest_element_index,
+			dest_frame_index);
+	/*set dma dest burst mode for VRFB */
+	omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
+	omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0);
+
+	omap_start_dma(tx->dma_ch);
+	interruptible_sleep_on_timeout(&tx->wait, VRFB_TX_TIMEOUT);
+
+	if (tx->tx_status == 0) {
+		omap_stop_dma(tx->dma_ch);
+		return -EINVAL;
+	}
+	/* Store buffers physical address into an array. Addresses
+	 * from this array will be used to configure DSS */
+	vout->queued_buf_addr[vb->i] = (u8 *)
+		vout->vrfb_context[vb->i].paddr[rotation];
+	return 0;
+}
+
+/*
+ * Calculate the buffer offsets from which the streaming should
+ * start. This offset calculation is mainly required because of
+ * the VRFB 32 pixels alignment with rotation.
+ */
+void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout)
+{
+	enum dss_rotation rotation;
+	bool mirroring = vout->mirror;
+	struct v4l2_rect *crop = &vout->crop;
+	struct v4l2_pix_format *pix = &vout->pix;
+	int *cropped_offset = &vout->cropped_offset;
+	int vr_ps = 1, ps = 2, temp_ps = 2;
+	int offset = 0, ctop = 0, cleft = 0, line_length = 0;
+
+	rotation = calc_rotation(vout);
+
+	if (V4L2_PIX_FMT_YUYV == pix->pixelformat ||
+			V4L2_PIX_FMT_UYVY == pix->pixelformat) {
+		if (is_rotation_enabled(vout)) {
+			/*
+			 * ps    - Actual pixel size for YUYV/UYVY for
+			 *         VRFB/Mirroring is 4 bytes
+			 * vr_ps - Virtually pixel size for YUYV/UYVY is
+			 *         2 bytes
+			 */
+			ps = 4;
+			vr_ps = 2;
+		} else {
+			ps = 2;	/* otherwise the pixel size is 2 byte */
+		}
+	} else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat) {
+		ps = 4;
+	} else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat) {
+		ps = 3;
+	}
+	vout->ps = ps;
+	vout->vr_ps = vr_ps;
+
+	if (is_rotation_enabled(vout)) {
+		line_length = MAX_PIXELS_PER_LINE;
+		ctop = (pix->height - crop->height) - crop->top;
+		cleft = (pix->width - crop->width) - crop->left;
+	} else {
+		line_length = pix->width;
+	}
+	vout->line_length = line_length;
+	switch (rotation) {
+	case dss_rotation_90_degree:
+		offset = vout->vrfb_context[0].yoffset *
+			vout->vrfb_context[0].bytespp;
+		temp_ps = ps / vr_ps;
+		if (mirroring == 0) {
+			*cropped_offset = offset + line_length *
+				temp_ps * cleft + crop->top * temp_ps;
+		} else {
+			*cropped_offset = offset + line_length * temp_ps *
+				cleft + crop->top * temp_ps + (line_length *
+				((crop->width / (vr_ps)) - 1) * ps);
+		}
+		break;
+	case dss_rotation_180_degree:
+		offset = ((MAX_PIXELS_PER_LINE * vout->vrfb_context[0].yoffset *
+			vout->vrfb_context[0].bytespp) +
+			(vout->vrfb_context[0].xoffset *
+			vout->vrfb_context[0].bytespp));
+		if (mirroring == 0) {
+			*cropped_offset = offset + (line_length * ps * ctop) +
+				(cleft / vr_ps) * ps;
+
+		} else {
+			*cropped_offset = offset + (line_length * ps * ctop) +
+				(cleft / vr_ps) * ps + (line_length *
+				(crop->height - 1) * ps);
+		}
+		break;
+	case dss_rotation_270_degree:
+		offset = MAX_PIXELS_PER_LINE * vout->vrfb_context[0].xoffset *
+			vout->vrfb_context[0].bytespp;
+		temp_ps = ps / vr_ps;
+		if (mirroring == 0) {
+			*cropped_offset = offset + line_length *
+			    temp_ps * crop->left + ctop * ps;
+		} else {
+			*cropped_offset = offset + line_length *
+				temp_ps * crop->left + ctop * ps +
+				(line_length * ((crop->width / vr_ps) - 1) *
+				 ps);
+		}
+		break;
+	case dss_rotation_0_degree:
+		if (mirroring == 0) {
+			*cropped_offset = (line_length * ps) *
+				crop->top + (crop->left / vr_ps) * ps;
+		} else {
+			*cropped_offset = (line_length * ps) *
+				crop->top + (crop->left / vr_ps) * ps +
+				(line_length * (crop->height - 1) * ps);
+		}
+		break;
+	default:
+		*cropped_offset = (line_length * ps * crop->top) /
+			vr_ps + (crop->left * ps) / vr_ps +
+			((crop->width / vr_ps) - 1) * ps;
+		break;
+	}
+}
diff --git a/drivers/media/video/omap/omap_vout_vrfb.h b/drivers/media/video/omap/omap_vout_vrfb.h
new file mode 100644
index 0000000..ffde741
--- /dev/null
+++ b/drivers/media/video/omap/omap_vout_vrfb.h
@@ -0,0 +1,40 @@
+/*
+ * omap_vout_vrfb.h
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#ifndef OMAP_VOUT_VRFB_H
+#define OMAP_VOUT_VRFB_H
+
+#ifdef CONFIG_VIDEO_OMAP2_VOUT_VRFB
+void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout);
+int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
+			u32 static_vrfb_allocation);
+void omap_vout_release_vrfb(struct omap_vout_device *vout);
+int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
+			unsigned int *count, unsigned int startindex);
+int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
+			struct videobuf_buffer *vb);
+void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout);
+#else
+void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout) { }
+int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
+			u32 static_vrfb_allocation)
+		{ return 0; }
+void omap_vout_release_vrfb(struct omap_vout_device *vout) { }
+int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
+			unsigned int *count, unsigned int startindex)
+		{ return 0; }
+int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
+			struct videobuf_buffer *vb)
+		{ return 0; }
+void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout) { }
+#endif
+
+#endif
diff --git a/drivers/media/video/omap/omap_voutdef.h b/drivers/media/video/omap/omap_voutdef.h
index 659497b..d793501 100644
--- a/drivers/media/video/omap/omap_voutdef.h
+++ b/drivers/media/video/omap/omap_voutdef.h
@@ -12,6 +12,7 @@
 #define OMAP_VOUTDEF_H
 
 #include <video/omapdss.h>
+#include <plat/vrfb.h>
 
 #define YUYV_BPP        2
 #define RGB565_BPP      2
@@ -27,6 +28,31 @@
 #define MAX_DISPLAYS	3
 #define MAX_MANAGERS	3
 
+#define QQVGA_WIDTH		160
+#define QQVGA_HEIGHT		120
+
+/* Max Resolution supported by the driver */
+#define VID_MAX_WIDTH		1280	/* Largest width */
+#define VID_MAX_HEIGHT		720	/* Largest height */
+
+/* Mimimum requirement is 2x2 for DSS */
+#define VID_MIN_WIDTH		2
+#define VID_MIN_HEIGHT		2
+
+/* 2048 x 2048 is max res supported by OMAP display controller */
+#define MAX_PIXELS_PER_LINE     2048
+
+#define VRFB_TX_TIMEOUT         1000
+#define VRFB_NUM_BUFS		4
+
+/* Max buffer size tobe allocated during init */
+#define OMAP_VOUT_MAX_BUF_SIZE (VID_MAX_WIDTH*VID_MAX_HEIGHT*4)
+
+enum dma_channel_state {
+	DMA_CHAN_NOT_ALLOTED,
+	DMA_CHAN_ALLOTED,
+};
+
 /* Enum for Rotation
  * DSS understands rotation in 0, 1, 2, 3 context
  * while V4L2 driver understands it as 0, 90, 180, 270
@@ -37,6 +63,18 @@ enum dss_rotation {
 	dss_rotation_180_degree	= 2,
 	dss_rotation_270_degree = 3,
 };
+
+/* Enum for choosing rotation type for vout
+ * DSS2 doesn't understand no rotation as an
+ * option while V4L2 driver doesn't support
+ * rotation in the case where VRFB is not built in
+ * the kernel
+ */
+enum vout_rotaion_type {
+	VOUT_ROT_NONE	= 0,
+	VOUT_ROT_VRFB	= 1,
+};
+
 /*
  * This structure is used to store the DMA transfer parameters
  * for VRFB hidden buffer
@@ -53,6 +91,7 @@ struct omapvideo_info {
 	int id;
 	int num_overlays;
 	struct omap_overlay *overlays[MAX_OVLS];
+	enum vout_rotaion_type rotation_type;
 };
 
 struct omap2video_device {
@@ -144,4 +183,43 @@ struct omap_vout_device {
 	int io_allowed;
 
 };
+
+/*
+ * Return true if rotation is 90 or 270
+ */
+static inline int is_rotation_90_or_270(const struct omap_vout_device *vout)
+{
+	return (vout->rotation == dss_rotation_90_degree ||
+			vout->rotation == dss_rotation_270_degree);
+}
+
+/*
+ * Return true if rotation is enabled
+ */
+static inline int is_rotation_enabled(const struct omap_vout_device *vout)
+{
+	return vout->rotation || vout->mirror;
+}
+
+/*
+ * Reverse the rotation degree if mirroring is enabled
+ */
+static inline int calc_rotation(const struct omap_vout_device *vout)
+{
+	if (!vout->mirror)
+		return vout->rotation;
+
+	switch (vout->rotation) {
+	case dss_rotation_90_degree:
+		return dss_rotation_270_degree;
+	case dss_rotation_270_degree:
+		return dss_rotation_90_degree;
+	case dss_rotation_180_degree:
+		return dss_rotation_0_degree;
+	default:
+		return dss_rotation_180_degree;
+	}
+}
+
+void omap_vout_free_buffers(struct omap_vout_device *vout);
 #endif	/* ifndef OMAP_VOUTDEF_H */
diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c
index 8ae7481..115408b 100644
--- a/drivers/media/video/omap/omap_voutlib.c
+++ b/drivers/media/video/omap/omap_voutlib.c
@@ -24,8 +24,12 @@
 #include <linux/types.h>
 #include <linux/videodev2.h>
 
+#include <linux/dma-mapping.h>
+
 #include <plat/cpu.h>
 
+#include "omap_voutlib.h"
+
 MODULE_AUTHOR("Texas Instruments");
 MODULE_DESCRIPTION("OMAP Video library");
 MODULE_LICENSE("GPL");
@@ -291,3 +295,45 @@ void omap_vout_new_format(struct v4l2_pix_format *pix,
 }
 EXPORT_SYMBOL_GPL(omap_vout_new_format);
 
+/*
+ * Allocate buffers
+ */
+unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr)
+{
+	u32 order, size;
+	unsigned long virt_addr, addr;
+
+	size = PAGE_ALIGN(buf_size);
+	order = get_order(size);
+	virt_addr = __get_free_pages(GFP_KERNEL, order);
+	addr = virt_addr;
+
+	if (virt_addr) {
+		while (size > 0) {
+			SetPageReserved(virt_to_page(addr));
+			addr += PAGE_SIZE;
+			size -= PAGE_SIZE;
+		}
+	}
+	*phys_addr = (u32) virt_to_phys((void *) virt_addr);
+	return virt_addr;
+}
+
+/*
+ * Free buffers
+ */
+void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size)
+{
+	u32 order, size;
+	unsigned long addr = virtaddr;
+
+	size = PAGE_ALIGN(buf_size);
+	order = get_order(size);
+
+	while (size > 0) {
+		ClearPageReserved(virt_to_page(addr));
+		addr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	free_pages((unsigned long) virtaddr, order);
+}
diff --git a/drivers/media/video/omap/omap_voutlib.h b/drivers/media/video/omap/omap_voutlib.h
index a60b16e..e51750a 100644
--- a/drivers/media/video/omap/omap_voutlib.h
+++ b/drivers/media/video/omap/omap_voutlib.h
@@ -12,23 +12,25 @@
 #ifndef OMAP_VOUTLIB_H
 #define OMAP_VOUTLIB_H
 
-extern void omap_vout_default_crop(struct v4l2_pix_format *pix,
+void omap_vout_default_crop(struct v4l2_pix_format *pix,
 		struct v4l2_framebuffer *fbuf, struct v4l2_rect *crop);
 
-extern int omap_vout_new_crop(struct v4l2_pix_format *pix,
+int omap_vout_new_crop(struct v4l2_pix_format *pix,
 		struct v4l2_rect *crop, struct v4l2_window *win,
 		struct v4l2_framebuffer *fbuf,
 		const struct v4l2_rect *new_crop);
 
-extern int omap_vout_try_window(struct v4l2_framebuffer *fbuf,
+int omap_vout_try_window(struct v4l2_framebuffer *fbuf,
 		struct v4l2_window *new_win);
 
-extern int omap_vout_new_window(struct v4l2_rect *crop,
+int omap_vout_new_window(struct v4l2_rect *crop,
 		struct v4l2_window *win, struct v4l2_framebuffer *fbuf,
 		struct v4l2_window *new_win);
 
-extern void omap_vout_new_format(struct v4l2_pix_format *pix,
+void omap_vout_new_format(struct v4l2_pix_format *pix,
 		struct v4l2_framebuffer *fbuf, struct v4l2_rect *crop,
 		struct v4l2_window *win);
+unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr);
+void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size);
 #endif	/* #ifndef OMAP_VOUTLIB_H */
 
diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index e7cfc85b..8a947e6 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -26,7 +26,6 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 
 #include <media/omap1_camera.h>
 #include <media/soc_camera.h>
@@ -38,7 +37,7 @@
 
 
 #define DRIVER_NAME		"omap1-camera"
-#define VERSION_CODE		KERNEL_VERSION(0, 0, 1)
+#define DRIVER_VERSION		"0.0.2"
 
 
 /*
@@ -208,7 +207,7 @@ static int omap1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	struct soc_camera_device *icd = vq->priv_data;
 	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
 			icd->current_fmt->host_fmt);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 
 	if (bytes_per_line < 0)
@@ -222,7 +221,7 @@ static int omap1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
 		*count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
 
-	dev_dbg(icd->dev.parent,
+	dev_dbg(icd->parent,
 			"%s: count=%d, size=%d\n", __func__, *count, *size);
 
 	return 0;
@@ -241,7 +240,7 @@ static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf,
 		videobuf_dma_contig_free(vq, vb);
 	} else {
 		struct soc_camera_device *icd = vq->priv_data;
-		struct device *dev = icd->dev.parent;
+		struct device *dev = icd->parent;
 		struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
 
 		videobuf_dma_unmap(dev, dma);
@@ -258,7 +257,7 @@ static int omap1_videobuf_prepare(struct videobuf_queue *vq,
 	struct omap1_cam_buf *buf = container_of(vb, struct omap1_cam_buf, vb);
 	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
 			icd->current_fmt->host_fmt);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	int ret;
 
@@ -490,7 +489,7 @@ static void omap1_videobuf_queue(struct videobuf_queue *vq,
 						struct videobuf_buffer *vb)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	struct omap1_cam_buf *buf;
 	u32 mode;
@@ -519,7 +518,7 @@ static void omap1_videobuf_queue(struct videobuf_queue *vq,
 	pcdev->active = buf;
 	pcdev->ready = NULL;
 
-	dev_dbg(icd->dev.parent,
+	dev_dbg(icd->parent,
 		"%s: capture not active, setup FIFO, start DMA\n", __func__);
 	mode = CAM_READ_CACHE(pcdev, MODE) & ~THRESHOLD_MASK;
 	mode |= THRESHOLD_LEVEL(pcdev->vb_mode) << THRESHOLD_SHIFT;
@@ -543,8 +542,8 @@ static void omap1_videobuf_release(struct videobuf_queue *vq,
 	struct omap1_cam_buf *buf =
 			container_of(vb, struct omap1_cam_buf, vb);
 	struct soc_camera_device *icd = vq->priv_data;
-	struct device *dev = icd->dev.parent;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct omap1_cam_dev *pcdev = ici->priv;
 
 	switch (vb->state) {
@@ -573,7 +572,7 @@ static void videobuf_done(struct omap1_cam_dev *pcdev,
 {
 	struct omap1_cam_buf *buf = pcdev->active;
 	struct videobuf_buffer *vb;
-	struct device *dev = pcdev->icd->dev.parent;
+	struct device *dev = pcdev->icd->parent;
 
 	if (WARN_ON(!buf)) {
 		suspend_capture(pcdev);
@@ -799,7 +798,7 @@ out:
 static irqreturn_t cam_isr(int irq, void *data)
 {
 	struct omap1_cam_dev *pcdev = data;
-	struct device *dev = pcdev->icd->dev.parent;
+	struct device *dev = pcdev->icd->parent;
 	struct omap1_cam_buf *buf = pcdev->active;
 	u32 it_status;
 	unsigned long flags;
@@ -909,7 +908,7 @@ static void sensor_reset(struct omap1_cam_dev *pcdev, bool reset)
  */
 static int omap1_cam_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	u32 ctrlclock;
 
@@ -952,14 +951,14 @@ static int omap1_cam_add_device(struct soc_camera_device *icd)
 
 	pcdev->icd = icd;
 
-	dev_dbg(icd->dev.parent, "OMAP1 Camera driver attached to camera %d\n",
+	dev_dbg(icd->parent, "OMAP1 Camera driver attached to camera %d\n",
 			icd->devnum);
 	return 0;
 }
 
 static void omap1_cam_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	u32 ctrlclock;
 
@@ -985,7 +984,7 @@ static void omap1_cam_remove_device(struct soc_camera_device *icd)
 
 	pcdev->icd = NULL;
 
-	dev_dbg(icd->dev.parent,
+	dev_dbg(icd->parent,
 		"OMAP1 Camera driver detached from camera %d\n", icd->devnum);
 }
 
@@ -1070,7 +1069,7 @@ static int omap1_cam_get_formats(struct soc_camera_device *icd,
 		unsigned int idx, struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	int formats = 0, ret;
 	enum v4l2_mbus_pixelcode code;
 	const struct soc_mbus_pixelfmt *fmt;
@@ -1222,9 +1221,9 @@ static int omap1_cam_set_crop(struct soc_camera_device *icd,
 	struct v4l2_rect *rect = &crop->c;
 	const struct soc_camera_format_xlate *xlate = icd->current_fmt;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct omap1_cam_dev *pcdev = ici->priv;
-	struct device *dev = icd->dev.parent;
 	struct v4l2_mbus_framefmt mf;
 	int ret;
 
@@ -1270,8 +1269,8 @@ static int omap1_cam_set_fmt(struct soc_camera_device *icd,
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
-	struct device *dev = icd->dev.parent;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_mbus_framefmt mf;
@@ -1326,7 +1325,7 @@ static int omap1_cam_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %#x not found\n",
+		dev_warn(icd->parent, "Format %#x not found\n",
 			 pix->pixelformat);
 		return -EINVAL;
 	}
@@ -1362,7 +1361,7 @@ static int omap1_cam_mmap_mapper(struct videobuf_queue *q,
 				  struct vm_area_struct *vma)
 {
 	struct soc_camera_device *icd = q->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	int ret;
 
@@ -1377,17 +1376,17 @@ static int omap1_cam_mmap_mapper(struct videobuf_queue *q,
 static void omap1_cam_init_videobuf(struct videobuf_queue *q,
 				     struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 
 	if (!sg_mode)
 		videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops,
-				icd->dev.parent, &pcdev->lock,
+				icd->parent, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
 				sizeof(struct omap1_cam_buf), icd, &icd->video_lock);
 	else
 		videobuf_queue_sg_init(q, &omap1_videobuf_ops,
-				icd->dev.parent, &pcdev->lock,
+				icd->parent, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
 				sizeof(struct omap1_cam_buf), icd, &icd->video_lock);
 
@@ -1431,7 +1430,6 @@ static int omap1_cam_querycap(struct soc_camera_host *ici,
 {
 	/* cap->name is set by the friendly caller:-> */
 	strlcpy(cap->card, "OMAP1 Camera", sizeof(cap->card));
-	cap->version = VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
@@ -1440,9 +1438,9 @@ static int omap1_cam_querycap(struct soc_camera_host *ici,
 static int omap1_cam_set_bus_param(struct soc_camera_device *icd,
 		__u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct omap1_cam_dev *pcdev = ici->priv;
-	struct device *dev = icd->dev.parent;
 	const struct soc_camera_format_xlate *xlate;
 	const struct soc_mbus_pixelfmt *fmt;
 	unsigned long camera_flags, common_flags;
@@ -1718,4 +1716,5 @@ MODULE_PARM_DESC(sg_mode, "videobuf mode, 0: dma-contig (default), 1: dma-sg");
 MODULE_DESCRIPTION("OMAP1 Camera Interface driver");
 MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>");
 MODULE_LICENSE("GPL v2");
+MODULE_LICENSE(DRIVER_VERSION);
 MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c
index 69b60ba..eb97bff 100644
--- a/drivers/media/video/omap24xxcam.c
+++ b/drivers/media/video/omap24xxcam.c
@@ -31,7 +31,6 @@
 #include <linux/interrupt.h>
 #include <linux/videodev2.h>
 #include <linux/pci.h>		/* needed for videobufs */
-#include <linux/version.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -43,7 +42,7 @@
 
 #include "omap24xxcam.h"
 
-#define OMAP24XXCAM_VERSION KERNEL_VERSION(0, 0, 0)
+#define OMAP24XXCAM_VERSION "0.0.1"
 
 #define RESET_TIMEOUT_NS 10000
 
@@ -309,11 +308,11 @@ static int omap24xxcam_vbq_alloc_mmap_buffer(struct videobuf_buffer *vb)
 			order--;
 
 		/* try to allocate as many contiguous pages as possible */
-		page = alloc_pages(GFP_KERNEL | GFP_DMA, order);
+		page = alloc_pages(GFP_KERNEL, order);
 		/* if allocation fails, try to allocate smaller amount */
 		while (page == NULL) {
 			order--;
-			page = alloc_pages(GFP_KERNEL | GFP_DMA, order);
+			page = alloc_pages(GFP_KERNEL, order);
 			if (page == NULL && !order) {
 				err = -ENOMEM;
 				goto out;
@@ -993,7 +992,6 @@ static int vidioc_querycap(struct file *file, void *fh,
 
 	strlcpy(cap->driver, CAM_NAME, sizeof(cap->driver));
 	strlcpy(cap->card, cam->vfd->name, sizeof(cap->card));
-	cap->version = OMAP24XXCAM_VERSION;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
@@ -1888,6 +1886,7 @@ static void __exit omap24xxcam_cleanup(void)
 MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>");
 MODULE_DESCRIPTION("OMAP24xx Video for Linux camera driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(OMAP24XXCAM_VERSION);
 module_param(video_nr, int, 0);
 MODULE_PARM_DESC(video_nr,
 		 "Minor number for video device (-1 ==> auto assign)");
diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index 94b6ed8..5cea2bb 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -2234,3 +2234,4 @@ module_exit(isp_cleanup);
 MODULE_AUTHOR("Nokia Corporation");
 MODULE_DESCRIPTION("TI OMAP3 ISP driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(ISP_VIDEO_DRIVER_VERSION);
diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/video/omap3isp/isp.h
index 2620c40..529e582 100644
--- a/drivers/media/video/omap3isp/isp.h
+++ b/drivers/media/video/omap3isp/isp.h
@@ -139,6 +139,10 @@ struct isp_reg {
  *		3 - CAMEXT[13:6] -> CAM[7:0]
  * @clk_pol: Pixel clock polarity
  *		0 - Non Inverted, 1 - Inverted
+ * @hs_pol: Horizontal synchronization polarity
+ *		0 - Active high, 1 - Active low
+ * @vs_pol: Vertical synchronization polarity
+ *		0 - Active high, 1 - Active low
  * @bridge: CCDC Bridge input control
  *		ISPCTRL_PAR_BRIDGE_DISABLE - Disable
  *		ISPCTRL_PAR_BRIDGE_LENDIAN - Little endian
@@ -147,6 +151,8 @@ struct isp_reg {
 struct isp_parallel_platform_data {
 	unsigned int data_lane_shift:2;
 	unsigned int clk_pol:1;
+	unsigned int hs_pol:1;
+	unsigned int vs_pol:1;
 	unsigned int bridge:4;
 };
 
diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index 39d501b..9d3459d 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -1148,6 +1148,8 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc)
 	omap3isp_configure_bridge(isp, ccdc->input, pdata, shift);
 
 	ccdc->syncif.datsz = depth_out;
+	ccdc->syncif.hdpol = pdata ? pdata->hs_pol : 0;
+	ccdc->syncif.vdpol = pdata ? pdata->vs_pol : 0;
 	ccdc_config_sync_if(ccdc, &ccdc->syncif);
 
 	/* CCDC_PAD_SINK */
@@ -1691,7 +1693,7 @@ static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
 	if (sub->type != V4L2_EVENT_OMAP3ISP_HS_VS)
 		return -EINVAL;
 
-	return v4l2_event_subscribe(fh, sub);
+	return v4l2_event_subscribe(fh, sub, OMAP3ISP_CCDC_NEVENTS);
 }
 
 static int ccdc_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
@@ -2162,7 +2164,6 @@ static int ccdc_init_entities(struct isp_ccdc_device *ccdc)
 	sd->grp_id = 1 << 16;	/* group ID for isp subdevs */
 	v4l2_set_subdevdata(sd, ccdc);
 	sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
-	sd->nevents = OMAP3ISP_CCDC_NEVENTS;
 
 	pads[CCDC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
 	pads[CCDC_PAD_SOURCE_VP].flags = MEDIA_PAD_FL_SOURCE;
@@ -2257,8 +2258,6 @@ int omap3isp_ccdc_init(struct isp_device *isp)
 	ccdc->syncif.fldout = 0;
 	ccdc->syncif.fldpol = 0;
 	ccdc->syncif.fldstat = 0;
-	ccdc->syncif.hdpol = 0;
-	ccdc->syncif.vdpol = 0;
 
 	ccdc->clamp.oblen = 0;
 	ccdc->clamp.dcsubval = 0;
diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c
index 0e16cab..ec9e395 100644
--- a/drivers/media/video/omap3isp/ispccp2.c
+++ b/drivers/media/video/omap3isp/ispccp2.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
+#include <linux/regulator/consumer.h>
 
 #include "isp.h"
 #include "ispreg.h"
@@ -163,6 +164,9 @@ static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
 	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
 	int i;
 
+	if (enable && ccp2->vdds_csib)
+		regulator_enable(ccp2->vdds_csib);
+
 	/* Enable/Disable all the LCx channels */
 	for (i = 0; i < CCP2_LCx_CHANS_NUM; i++)
 		isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i),
@@ -186,6 +190,9 @@ static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
 				    ISPCCP2_LC01_IRQENABLE,
 				    ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ);
 	}
+
+	if (!enable && ccp2->vdds_csib)
+		regulator_disable(ccp2->vdds_csib);
 }
 
 /*
@@ -1137,6 +1144,9 @@ error:
  */
 void omap3isp_ccp2_cleanup(struct isp_device *isp)
 {
+	struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
+
+	regulator_put(ccp2->vdds_csib);
 }
 
 /*
@@ -1151,14 +1161,27 @@ int omap3isp_ccp2_init(struct isp_device *isp)
 
 	init_waitqueue_head(&ccp2->wait);
 
-	/* On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
+	/*
+	 * On the OMAP34xx the CSI1 receiver is operated in the CSIb IO
+	 * complex, which is powered by vdds_csib power rail. Hence the
+	 * request for the regulator.
+	 *
+	 * On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
 	 * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly
 	 * configured.
 	 *
 	 * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c).
 	 */
-	if (isp->revision == ISP_REVISION_15_0)
+	if (isp->revision == ISP_REVISION_2_0) {
+		ccp2->vdds_csib = regulator_get(isp->dev, "vdds_csib");
+		if (IS_ERR(ccp2->vdds_csib)) {
+			dev_dbg(isp->dev,
+				"Could not get regulator vdds_csib\n");
+			ccp2->vdds_csib = NULL;
+		}
+	} else if (isp->revision == ISP_REVISION_15_0) {
 		ccp2->phy = &isp->isp_csiphy1;
+	}
 
 	ret = ccp2_init_entities(ccp2);
 	if (ret < 0)
diff --git a/drivers/media/video/omap3isp/ispccp2.h b/drivers/media/video/omap3isp/ispccp2.h
index 5505a86..6674e9d 100644
--- a/drivers/media/video/omap3isp/ispccp2.h
+++ b/drivers/media/video/omap3isp/ispccp2.h
@@ -81,6 +81,7 @@ struct isp_ccp2_device {
 	struct isp_interface_mem_config mem_cfg;
 	struct isp_video video_in;
 	struct isp_csiphy *phy;
+	struct regulator *vdds_csib;
 	unsigned int error;
 	enum isp_pipeline_stream_state state;
 	wait_queue_head_t wait;
diff --git a/drivers/media/video/omap3isp/ispstat.c b/drivers/media/video/omap3isp/ispstat.c
index b44cb68..8080659 100644
--- a/drivers/media/video/omap3isp/ispstat.c
+++ b/drivers/media/video/omap3isp/ispstat.c
@@ -1032,7 +1032,6 @@ static int isp_stat_init_entities(struct ispstat *stat, const char *name,
 	snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "OMAP3 ISP %s", name);
 	subdev->grp_id = 1 << 16;	/* group ID for isp subdevs */
 	subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
-	subdev->nevents = STAT_NEVENTS;
 	v4l2_set_subdevdata(subdev, stat);
 
 	stat->pad.flags = MEDIA_PAD_FL_SINK;
@@ -1050,7 +1049,7 @@ int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
 	if (sub->type != stat->event_type)
 		return -EINVAL;
 
-	return v4l2_event_subscribe(fh, sub);
+	return v4l2_event_subscribe(fh, sub, STAT_NEVENTS);
 }
 
 int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev,
diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index 9cd8f1a..fd965ad 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -695,7 +695,6 @@ isp_video_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
 	strlcpy(cap->driver, ISP_VIDEO_DRIVER_NAME, sizeof(cap->driver));
 	strlcpy(cap->card, video->video.name, sizeof(cap->card));
 	strlcpy(cap->bus_info, "media", sizeof(cap->bus_info));
-	cap->version = ISP_VIDEO_DRIVER_VERSION;
 
 	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h
index 911bea6..53160aa 100644
--- a/drivers/media/video/omap3isp/ispvideo.h
+++ b/drivers/media/video/omap3isp/ispvideo.h
@@ -27,7 +27,6 @@
 #define OMAP3_ISP_VIDEO_H
 
 #include <linux/v4l2-mediabus.h>
-#include <linux/version.h>
 #include <media/media-entity.h>
 #include <media/v4l2-dev.h>
 #include <media/v4l2-fh.h>
@@ -35,7 +34,7 @@
 #include "ispqueue.h"
 
 #define ISP_VIDEO_DRIVER_NAME		"ispvideo"
-#define ISP_VIDEO_DRIVER_VERSION	KERNEL_VERSION(0, 0, 1)
+#define ISP_VIDEO_DRIVER_VERSION	"0.0.2"
 
 struct isp_device;
 struct isp_video;
diff --git a/drivers/media/video/ov2640.c b/drivers/media/video/ov2640.c
index 0cea0cf..9ce2fa0 100644
--- a/drivers/media/video/ov2640.c
+++ b/drivers/media/video/ov2640.c
@@ -1031,16 +1031,9 @@ static int ov2640_video_probe(struct soc_camera_device *icd,
 	const char *devname;
 	int ret;
 
-	/*
-	 * we must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
-		dev_err(&client->dev, "Parent missing or invalid!\n");
-		ret = -ENODEV;
-		goto err;
-	}
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * check and show product ID and manufacturer ID
diff --git a/drivers/media/video/ov5642.c b/drivers/media/video/ov5642.c
new file mode 100644
index 0000000..349a4ad
--- /dev/null
+++ b/drivers/media/video/ov5642.c
@@ -0,0 +1,1012 @@
+/*
+ * Driver for OV5642 CMOS Image Sensor from Omnivision
+ *
+ * Copyright (C) 2011, Bastian Hecht <hechtb@gmail.com>
+ *
+ * Based on Sony IMX074 Camera Driver
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * Based on Omnivision OV7670 Camera Driver
+ * Copyright (C) 2006-7 Jonathan Corbet <corbet@lwn.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <linux/module.h>
+
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-subdev.h>
+
+/* OV5642 registers */
+#define REG_CHIP_ID_HIGH		0x300a
+#define REG_CHIP_ID_LOW			0x300b
+
+#define REG_WINDOW_START_X_HIGH		0x3800
+#define REG_WINDOW_START_X_LOW		0x3801
+#define REG_WINDOW_START_Y_HIGH		0x3802
+#define REG_WINDOW_START_Y_LOW		0x3803
+#define REG_WINDOW_WIDTH_HIGH		0x3804
+#define REG_WINDOW_WIDTH_LOW		0x3805
+#define REG_WINDOW_HEIGHT_HIGH 		0x3806
+#define REG_WINDOW_HEIGHT_LOW		0x3807
+#define REG_OUT_WIDTH_HIGH		0x3808
+#define REG_OUT_WIDTH_LOW		0x3809
+#define REG_OUT_HEIGHT_HIGH		0x380a
+#define REG_OUT_HEIGHT_LOW		0x380b
+#define REG_OUT_TOTAL_WIDTH_HIGH	0x380c
+#define REG_OUT_TOTAL_WIDTH_LOW		0x380d
+#define REG_OUT_TOTAL_HEIGHT_HIGH	0x380e
+#define REG_OUT_TOTAL_HEIGHT_LOW	0x380f
+
+/*
+ * define standard resolution.
+ * Works currently only for up to 720 lines
+ * eg. 320x240, 640x480, 800x600, 1280x720, 2048x720
+ */
+
+#define OV5642_WIDTH		1280
+#define OV5642_HEIGHT		720
+#define OV5642_TOTAL_WIDTH	3200
+#define OV5642_TOTAL_HEIGHT	2000
+#define OV5642_SENSOR_SIZE_X	2592
+#define OV5642_SENSOR_SIZE_Y	1944
+
+struct regval_list {
+	u16 reg_num;
+	u8 value;
+};
+
+static struct regval_list ov5642_default_regs_init[] = {
+	{ 0x3103, 0x93 },
+	{ 0x3008, 0x82 },
+	{ 0x3017, 0x7f },
+	{ 0x3018, 0xfc },
+	{ 0x3810, 0xc2 },
+	{ 0x3615, 0xf0 },
+	{ 0x3000, 0x0  },
+	{ 0x3001, 0x0  },
+	{ 0x3002, 0x0  },
+	{ 0x3003, 0x0  },
+	{ 0x3004, 0xff },
+	{ 0x3030, 0x2b },
+	{ 0x3011, 0x8  },
+	{ 0x3010, 0x10 },
+	{ 0x3604, 0x60 },
+	{ 0x3622, 0x60 },
+	{ 0x3621, 0x9  },
+	{ 0x3709, 0x0  },
+	{ 0x4000, 0x21 },
+	{ 0x401d, 0x22 },
+	{ 0x3600, 0x54 },
+	{ 0x3605, 0x4  },
+	{ 0x3606, 0x3f },
+	{ 0x3c01, 0x80 },
+	{ 0x300d, 0x22 },
+	{ 0x3623, 0x22 },
+	{ 0x5000, 0x4f },
+	{ 0x5020, 0x4  },
+	{ 0x5181, 0x79 },
+	{ 0x5182, 0x0  },
+	{ 0x5185, 0x22 },
+	{ 0x5197, 0x1  },
+	{ 0x5500, 0xa  },
+	{ 0x5504, 0x0  },
+	{ 0x5505, 0x7f },
+	{ 0x5080, 0x8  },
+	{ 0x300e, 0x18 },
+	{ 0x4610, 0x0  },
+	{ 0x471d, 0x5  },
+	{ 0x4708, 0x6  },
+	{ 0x370c, 0xa0 },
+	{ 0x5687, 0x94 },
+	{ 0x501f, 0x0  },
+	{ 0x5000, 0x4f },
+	{ 0x5001, 0xcf },
+	{ 0x4300, 0x30 },
+	{ 0x4300, 0x30 },
+	{ 0x460b, 0x35 },
+	{ 0x471d, 0x0  },
+	{ 0x3002, 0xc  },
+	{ 0x3002, 0x0  },
+	{ 0x4713, 0x3  },
+	{ 0x471c, 0x50 },
+	{ 0x4721, 0x2  },
+	{ 0x4402, 0x90 },
+	{ 0x460c, 0x22 },
+	{ 0x3815, 0x44 },
+	{ 0x3503, 0x7  },
+	{ 0x3501, 0x73 },
+	{ 0x3502, 0x80 },
+	{ 0x350b, 0x0  },
+	{ 0x3818, 0xc8 },
+	{ 0x3824, 0x11 },
+	{ 0x3a00, 0x78 },
+	{ 0x3a1a, 0x4  },
+	{ 0x3a13, 0x30 },
+	{ 0x3a18, 0x0  },
+	{ 0x3a19, 0x7c },
+	{ 0x3a08, 0x12 },
+	{ 0x3a09, 0xc0 },
+	{ 0x3a0a, 0xf  },
+	{ 0x3a0b, 0xa0 },
+	{ 0x350c, 0x7  },
+	{ 0x350d, 0xd0 },
+	{ 0x3a0d, 0x8  },
+	{ 0x3a0e, 0x6  },
+	{ 0x3500, 0x0  },
+	{ 0x3501, 0x0  },
+	{ 0x3502, 0x0  },
+	{ 0x350a, 0x0  },
+	{ 0x350b, 0x0  },
+	{ 0x3503, 0x0  },
+	{ 0x3a0f, 0x3c },
+	{ 0x3a10, 0x32 },
+	{ 0x3a1b, 0x3c },
+	{ 0x3a1e, 0x32 },
+	{ 0x3a11, 0x80 },
+	{ 0x3a1f, 0x20 },
+	{ 0x3030, 0x2b },
+	{ 0x3a02, 0x0  },
+	{ 0x3a03, 0x7d },
+	{ 0x3a04, 0x0  },
+	{ 0x3a14, 0x0  },
+	{ 0x3a15, 0x7d },
+	{ 0x3a16, 0x0  },
+	{ 0x3a00, 0x78 },
+	{ 0x3a08, 0x9  },
+	{ 0x3a09, 0x60 },
+	{ 0x3a0a, 0x7  },
+	{ 0x3a0b, 0xd0 },
+	{ 0x3a0d, 0x10 },
+	{ 0x3a0e, 0xd  },
+	{ 0x4407, 0x4  },
+	{ 0x5193, 0x70 },
+	{ 0x589b, 0x0  },
+	{ 0x589a, 0xc0 },
+	{ 0x401e, 0x20 },
+	{ 0x4001, 0x42 },
+	{ 0x401c, 0x6  },
+	{ 0x3825, 0xac },
+	{ 0x3827, 0xc  },
+	{ 0x528a, 0x1  },
+	{ 0x528b, 0x4  },
+	{ 0x528c, 0x8  },
+	{ 0x528d, 0x10 },
+	{ 0x528e, 0x20 },
+	{ 0x528f, 0x28 },
+	{ 0x5290, 0x30 },
+	{ 0x5292, 0x0  },
+	{ 0x5293, 0x1  },
+	{ 0x5294, 0x0  },
+	{ 0x5295, 0x4  },
+	{ 0x5296, 0x0  },
+	{ 0x5297, 0x8  },
+	{ 0x5298, 0x0  },
+	{ 0x5299, 0x10 },
+	{ 0x529a, 0x0  },
+	{ 0x529b, 0x20 },
+	{ 0x529c, 0x0  },
+	{ 0x529d, 0x28 },
+	{ 0x529e, 0x0  },
+	{ 0x529f, 0x30 },
+	{ 0x5282, 0x0  },
+	{ 0x5300, 0x0  },
+	{ 0x5301, 0x20 },
+	{ 0x5302, 0x0  },
+	{ 0x5303, 0x7c },
+	{ 0x530c, 0x0  },
+	{ 0x530d, 0xc  },
+	{ 0x530e, 0x20 },
+	{ 0x530f, 0x80 },
+	{ 0x5310, 0x20 },
+	{ 0x5311, 0x80 },
+	{ 0x5308, 0x20 },
+	{ 0x5309, 0x40 },
+	{ 0x5304, 0x0  },
+	{ 0x5305, 0x30 },
+	{ 0x5306, 0x0  },
+	{ 0x5307, 0x80 },
+	{ 0x5314, 0x8  },
+	{ 0x5315, 0x20 },
+	{ 0x5319, 0x30 },
+	{ 0x5316, 0x10 },
+	{ 0x5317, 0x0  },
+	{ 0x5318, 0x2  },
+	{ 0x5380, 0x1  },
+	{ 0x5381, 0x0  },
+	{ 0x5382, 0x0  },
+	{ 0x5383, 0x4e },
+	{ 0x5384, 0x0  },
+	{ 0x5385, 0xf  },
+	{ 0x5386, 0x0  },
+	{ 0x5387, 0x0  },
+	{ 0x5388, 0x1  },
+	{ 0x5389, 0x15 },
+	{ 0x538a, 0x0  },
+	{ 0x538b, 0x31 },
+	{ 0x538c, 0x0  },
+	{ 0x538d, 0x0  },
+	{ 0x538e, 0x0  },
+	{ 0x538f, 0xf  },
+	{ 0x5390, 0x0  },
+	{ 0x5391, 0xab },
+	{ 0x5392, 0x0  },
+	{ 0x5393, 0xa2 },
+	{ 0x5394, 0x8  },
+	{ 0x5480, 0x14 },
+	{ 0x5481, 0x21 },
+	{ 0x5482, 0x36 },
+	{ 0x5483, 0x57 },
+	{ 0x5484, 0x65 },
+	{ 0x5485, 0x71 },
+	{ 0x5486, 0x7d },
+	{ 0x5487, 0x87 },
+	{ 0x5488, 0x91 },
+	{ 0x5489, 0x9a },
+	{ 0x548a, 0xaa },
+	{ 0x548b, 0xb8 },
+	{ 0x548c, 0xcd },
+	{ 0x548d, 0xdd },
+	{ 0x548e, 0xea },
+	{ 0x548f, 0x1d },
+	{ 0x5490, 0x5  },
+	{ 0x5491, 0x0  },
+	{ 0x5492, 0x4  },
+	{ 0x5493, 0x20 },
+	{ 0x5494, 0x3  },
+	{ 0x5495, 0x60 },
+	{ 0x5496, 0x2  },
+	{ 0x5497, 0xb8 },
+	{ 0x5498, 0x2  },
+	{ 0x5499, 0x86 },
+	{ 0x549a, 0x2  },
+	{ 0x549b, 0x5b },
+	{ 0x549c, 0x2  },
+	{ 0x549d, 0x3b },
+	{ 0x549e, 0x2  },
+	{ 0x549f, 0x1c },
+	{ 0x54a0, 0x2  },
+	{ 0x54a1, 0x4  },
+	{ 0x54a2, 0x1  },
+	{ 0x54a3, 0xed },
+	{ 0x54a4, 0x1  },
+	{ 0x54a5, 0xc5 },
+	{ 0x54a6, 0x1  },
+	{ 0x54a7, 0xa5 },
+	{ 0x54a8, 0x1  },
+	{ 0x54a9, 0x6c },
+	{ 0x54aa, 0x1  },
+	{ 0x54ab, 0x41 },
+	{ 0x54ac, 0x1  },
+	{ 0x54ad, 0x20 },
+	{ 0x54ae, 0x0  },
+	{ 0x54af, 0x16 },
+	{ 0x54b0, 0x1  },
+	{ 0x54b1, 0x20 },
+	{ 0x54b2, 0x0  },
+	{ 0x54b3, 0x10 },
+	{ 0x54b4, 0x0  },
+	{ 0x54b5, 0xf0 },
+	{ 0x54b6, 0x0  },
+	{ 0x54b7, 0xdf },
+	{ 0x5402, 0x3f },
+	{ 0x5403, 0x0  },
+	{ 0x3406, 0x0  },
+	{ 0x5180, 0xff },
+	{ 0x5181, 0x52 },
+	{ 0x5182, 0x11 },
+	{ 0x5183, 0x14 },
+	{ 0x5184, 0x25 },
+	{ 0x5185, 0x24 },
+	{ 0x5186, 0x6  },
+	{ 0x5187, 0x8  },
+	{ 0x5188, 0x8  },
+	{ 0x5189, 0x7c },
+	{ 0x518a, 0x60 },
+	{ 0x518b, 0xb2 },
+	{ 0x518c, 0xb2 },
+	{ 0x518d, 0x44 },
+	{ 0x518e, 0x3d },
+	{ 0x518f, 0x58 },
+	{ 0x5190, 0x46 },
+	{ 0x5191, 0xf8 },
+	{ 0x5192, 0x4  },
+	{ 0x5193, 0x70 },
+	{ 0x5194, 0xf0 },
+	{ 0x5195, 0xf0 },
+	{ 0x5196, 0x3  },
+	{ 0x5197, 0x1  },
+	{ 0x5198, 0x4  },
+	{ 0x5199, 0x12 },
+	{ 0x519a, 0x4  },
+	{ 0x519b, 0x0  },
+	{ 0x519c, 0x6  },
+	{ 0x519d, 0x82 },
+	{ 0x519e, 0x0  },
+	{ 0x5025, 0x80 },
+	{ 0x3a0f, 0x38 },
+	{ 0x3a10, 0x30 },
+	{ 0x3a1b, 0x3a },
+	{ 0x3a1e, 0x2e },
+	{ 0x3a11, 0x60 },
+	{ 0x3a1f, 0x10 },
+	{ 0x5688, 0xa6 },
+	{ 0x5689, 0x6a },
+	{ 0x568a, 0xea },
+	{ 0x568b, 0xae },
+	{ 0x568c, 0xa6 },
+	{ 0x568d, 0x6a },
+	{ 0x568e, 0x62 },
+	{ 0x568f, 0x26 },
+	{ 0x5583, 0x40 },
+	{ 0x5584, 0x40 },
+	{ 0x5580, 0x2  },
+	{ 0x5000, 0xcf },
+	{ 0x5800, 0x27 },
+	{ 0x5801, 0x19 },
+	{ 0x5802, 0x12 },
+	{ 0x5803, 0xf  },
+	{ 0x5804, 0x10 },
+	{ 0x5805, 0x15 },
+	{ 0x5806, 0x1e },
+	{ 0x5807, 0x2f },
+	{ 0x5808, 0x15 },
+	{ 0x5809, 0xd  },
+	{ 0x580a, 0xa  },
+	{ 0x580b, 0x9  },
+	{ 0x580c, 0xa  },
+	{ 0x580d, 0xc  },
+	{ 0x580e, 0x12 },
+	{ 0x580f, 0x19 },
+	{ 0x5810, 0xb  },
+	{ 0x5811, 0x7  },
+	{ 0x5812, 0x4  },
+	{ 0x5813, 0x3  },
+	{ 0x5814, 0x3  },
+	{ 0x5815, 0x6  },
+	{ 0x5816, 0xa  },
+	{ 0x5817, 0xf  },
+	{ 0x5818, 0xa  },
+	{ 0x5819, 0x5  },
+	{ 0x581a, 0x1  },
+	{ 0x581b, 0x0  },
+	{ 0x581c, 0x0  },
+	{ 0x581d, 0x3  },
+	{ 0x581e, 0x8  },
+	{ 0x581f, 0xc  },
+	{ 0x5820, 0xa  },
+	{ 0x5821, 0x5  },
+	{ 0x5822, 0x1  },
+	{ 0x5823, 0x0  },
+	{ 0x5824, 0x0  },
+	{ 0x5825, 0x3  },
+	{ 0x5826, 0x8  },
+	{ 0x5827, 0xc  },
+	{ 0x5828, 0xe  },
+	{ 0x5829, 0x8  },
+	{ 0x582a, 0x6  },
+	{ 0x582b, 0x4  },
+	{ 0x582c, 0x5  },
+	{ 0x582d, 0x7  },
+	{ 0x582e, 0xb  },
+	{ 0x582f, 0x12 },
+	{ 0x5830, 0x18 },
+	{ 0x5831, 0x10 },
+	{ 0x5832, 0xc  },
+	{ 0x5833, 0xa  },
+	{ 0x5834, 0xb  },
+	{ 0x5835, 0xe  },
+	{ 0x5836, 0x15 },
+	{ 0x5837, 0x19 },
+	{ 0x5838, 0x32 },
+	{ 0x5839, 0x1f },
+	{ 0x583a, 0x18 },
+	{ 0x583b, 0x16 },
+	{ 0x583c, 0x17 },
+	{ 0x583d, 0x1e },
+	{ 0x583e, 0x26 },
+	{ 0x583f, 0x53 },
+	{ 0x5840, 0x10 },
+	{ 0x5841, 0xf  },
+	{ 0x5842, 0xd  },
+	{ 0x5843, 0xc  },
+	{ 0x5844, 0xe  },
+	{ 0x5845, 0x9  },
+	{ 0x5846, 0x11 },
+	{ 0x5847, 0x10 },
+	{ 0x5848, 0x10 },
+	{ 0x5849, 0x10 },
+	{ 0x584a, 0x10 },
+	{ 0x584b, 0xe  },
+	{ 0x584c, 0x10 },
+	{ 0x584d, 0x10 },
+	{ 0x584e, 0x11 },
+	{ 0x584f, 0x10 },
+	{ 0x5850, 0xf  },
+	{ 0x5851, 0xc  },
+	{ 0x5852, 0xf  },
+	{ 0x5853, 0x10 },
+	{ 0x5854, 0x10 },
+	{ 0x5855, 0xf  },
+	{ 0x5856, 0xe  },
+	{ 0x5857, 0xb  },
+	{ 0x5858, 0x10 },
+	{ 0x5859, 0xd  },
+	{ 0x585a, 0xd  },
+	{ 0x585b, 0xc  },
+	{ 0x585c, 0xc  },
+	{ 0x585d, 0xc  },
+	{ 0x585e, 0xb  },
+	{ 0x585f, 0xc  },
+	{ 0x5860, 0xc  },
+	{ 0x5861, 0xc  },
+	{ 0x5862, 0xd  },
+	{ 0x5863, 0x8  },
+	{ 0x5864, 0x11 },
+	{ 0x5865, 0x18 },
+	{ 0x5866, 0x18 },
+	{ 0x5867, 0x19 },
+	{ 0x5868, 0x17 },
+	{ 0x5869, 0x19 },
+	{ 0x586a, 0x16 },
+	{ 0x586b, 0x13 },
+	{ 0x586c, 0x13 },
+	{ 0x586d, 0x12 },
+	{ 0x586e, 0x13 },
+	{ 0x586f, 0x16 },
+	{ 0x5870, 0x14 },
+	{ 0x5871, 0x12 },
+	{ 0x5872, 0x10 },
+	{ 0x5873, 0x11 },
+	{ 0x5874, 0x11 },
+	{ 0x5875, 0x16 },
+	{ 0x5876, 0x14 },
+	{ 0x5877, 0x11 },
+	{ 0x5878, 0x10 },
+	{ 0x5879, 0xf  },
+	{ 0x587a, 0x10 },
+	{ 0x587b, 0x14 },
+	{ 0x587c, 0x13 },
+	{ 0x587d, 0x12 },
+	{ 0x587e, 0x11 },
+	{ 0x587f, 0x11 },
+	{ 0x5880, 0x12 },
+	{ 0x5881, 0x15 },
+	{ 0x5882, 0x14 },
+	{ 0x5883, 0x15 },
+	{ 0x5884, 0x15 },
+	{ 0x5885, 0x15 },
+	{ 0x5886, 0x13 },
+	{ 0x5887, 0x17 },
+	{ 0x3710, 0x10 },
+	{ 0x3632, 0x51 },
+	{ 0x3702, 0x10 },
+	{ 0x3703, 0xb2 },
+	{ 0x3704, 0x18 },
+	{ 0x370b, 0x40 },
+	{ 0x370d, 0x3  },
+	{ 0x3631, 0x1  },
+	{ 0x3632, 0x52 },
+	{ 0x3606, 0x24 },
+	{ 0x3620, 0x96 },
+	{ 0x5785, 0x7  },
+	{ 0x3a13, 0x30 },
+	{ 0x3600, 0x52 },
+	{ 0x3604, 0x48 },
+	{ 0x3606, 0x1b },
+	{ 0x370d, 0xb  },
+	{ 0x370f, 0xc0 },
+	{ 0x3709, 0x1  },
+	{ 0x3823, 0x0  },
+	{ 0x5007, 0x0  },
+	{ 0x5009, 0x0  },
+	{ 0x5011, 0x0  },
+	{ 0x5013, 0x0  },
+	{ 0x519e, 0x0  },
+	{ 0x5086, 0x0  },
+	{ 0x5087, 0x0  },
+	{ 0x5088, 0x0  },
+	{ 0x5089, 0x0  },
+	{ 0x302b, 0x0  },
+	{ 0x3503, 0x7  },
+	{ 0x3011, 0x8  },
+	{ 0x350c, 0x2  },
+	{ 0x350d, 0xe4 },
+	{ 0x3621, 0xc9 },
+	{ 0x370a, 0x81 },
+	{ 0xffff, 0xff },
+};
+
+static struct regval_list ov5642_default_regs_finalise[] = {
+	{ 0x3810, 0xc2 },
+	{ 0x3818, 0xc9 },
+	{ 0x381c, 0x10 },
+	{ 0x381d, 0xa0 },
+	{ 0x381e, 0x5  },
+	{ 0x381f, 0xb0 },
+	{ 0x3820, 0x0  },
+	{ 0x3821, 0x0  },
+	{ 0x3824, 0x11 },
+	{ 0x3a08, 0x1b },
+	{ 0x3a09, 0xc0 },
+	{ 0x3a0a, 0x17 },
+	{ 0x3a0b, 0x20 },
+	{ 0x3a0d, 0x2  },
+	{ 0x3a0e, 0x1  },
+	{ 0x401c, 0x4  },
+	{ 0x5682, 0x5  },
+	{ 0x5683, 0x0  },
+	{ 0x5686, 0x2  },
+	{ 0x5687, 0xcc },
+	{ 0x5001, 0x4f },
+	{ 0x589b, 0x6  },
+	{ 0x589a, 0xc5 },
+	{ 0x3503, 0x0  },
+	{ 0x460c, 0x20 },
+	{ 0x460b, 0x37 },
+	{ 0x471c, 0xd0 },
+	{ 0x471d, 0x5  },
+	{ 0x3815, 0x1  },
+	{ 0x3818, 0xc1 },
+	{ 0x501f, 0x0  },
+	{ 0x5002, 0xe0 },
+	{ 0x4300, 0x32 }, /* UYVY */
+	{ 0x3002, 0x1c },
+	{ 0x4800, 0x14 },
+	{ 0x4801, 0xf  },
+	{ 0x3007, 0x3b },
+	{ 0x300e, 0x4  },
+	{ 0x4803, 0x50 },
+	{ 0x3815, 0x1  },
+	{ 0x4713, 0x2  },
+	{ 0x4842, 0x1  },
+	{ 0x300f, 0xe  },
+	{ 0x3003, 0x3  },
+	{ 0x3003, 0x1  },
+	{ 0xffff, 0xff },
+};
+
+struct ov5642_datafmt {
+	enum v4l2_mbus_pixelcode	code;
+	enum v4l2_colorspace		colorspace;
+};
+
+struct ov5642 {
+	struct v4l2_subdev		subdev;
+	const struct ov5642_datafmt	*fmt;
+};
+
+static const struct ov5642_datafmt ov5642_colour_fmts[] = {
+	{V4L2_MBUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG},
+};
+
+static struct ov5642 *to_ov5642(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct ov5642, subdev);
+}
+
+/* Find a data format by a pixel code in an array */
+static const struct ov5642_datafmt
+			*ov5642_find_datafmt(enum v4l2_mbus_pixelcode code)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ov5642_colour_fmts); i++)
+		if (ov5642_colour_fmts[i].code == code)
+			return ov5642_colour_fmts + i;
+
+	return NULL;
+}
+
+static int reg_read(struct i2c_client *client, u16 reg, u8 *val)
+{
+	int ret;
+	/* We have 16-bit i2c addresses - care for endianess */
+	unsigned char data[2] = { reg >> 8, reg & 0xff };
+
+	ret = i2c_master_send(client, data, 2);
+	if (ret < 2) {
+		dev_err(&client->dev, "%s: i2c read error, reg: %x\n",
+			__func__, reg);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	ret = i2c_master_recv(client, val, 1);
+	if (ret < 1) {
+		dev_err(&client->dev, "%s: i2c read error, reg: %x\n",
+				__func__, reg);
+		return ret < 0 ? ret : -EIO;
+	}
+	return 0;
+}
+
+static int reg_write(struct i2c_client *client, u16 reg, u8 val)
+{
+	int ret;
+	unsigned char data[3] = { reg >> 8, reg & 0xff, val };
+
+	ret = i2c_master_send(client, data, 3);
+	if (ret < 3) {
+		dev_err(&client->dev, "%s: i2c write error, reg: %x\n",
+			__func__, reg);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	return 0;
+}
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov5642_get_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+	u8 val;
+
+	if (reg->reg & ~0xffff)
+		return -EINVAL;
+
+	reg->size = 1;
+
+	ret = reg_read(client, reg->reg, &val);
+	if (!ret)
+		reg->val = (__u64)val;
+
+	return ret;
+}
+
+static int ov5642_set_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (reg->reg & ~0xffff || reg->val & ~0xff)
+		return -EINVAL;
+
+	return reg_write(client, reg->reg, reg->val);
+}
+#endif
+
+static int ov5642_write_array(struct i2c_client *client,
+				struct regval_list *vals)
+{
+	while (vals->reg_num != 0xffff || vals->value != 0xff) {
+		int ret = reg_write(client, vals->reg_num, vals->value);
+		if (ret < 0)
+			return ret;
+		vals++;
+	}
+	dev_dbg(&client->dev, "Register list loaded\n");
+	return 0;
+}
+
+static int ov5642_set_resolution(struct i2c_client *client)
+{
+	int ret;
+	u8 start_x_high = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) >> 8;
+	u8 start_x_low  = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) & 0xff;
+	u8 start_y_high = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) >> 8;
+	u8 start_y_low  = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) & 0xff;
+
+	u8 width_high	= OV5642_WIDTH  >> 8;
+	u8 width_low	= OV5642_WIDTH  & 0xff;
+	u8 height_high	= OV5642_HEIGHT >> 8;
+	u8 height_low	= OV5642_HEIGHT & 0xff;
+
+	u8 total_width_high  = OV5642_TOTAL_WIDTH  >> 8;
+	u8 total_width_low   = OV5642_TOTAL_WIDTH  & 0xff;
+	u8 total_height_high = OV5642_TOTAL_HEIGHT >> 8;
+	u8 total_height_low  = OV5642_TOTAL_HEIGHT & 0xff;
+
+	ret = reg_write(client, REG_WINDOW_START_X_HIGH, start_x_high);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_START_X_LOW, start_x_low);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_START_Y_HIGH, start_y_high);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_START_Y_LOW, start_y_low);
+
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_WIDTH_HIGH, width_high);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_WIDTH_LOW , width_low);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_HEIGHT_HIGH, height_high);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_HEIGHT_LOW,  height_low);
+
+	if (!ret)
+		ret = reg_write(client, REG_OUT_WIDTH_HIGH, width_high);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_WIDTH_LOW , width_low);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_HEIGHT_HIGH, height_high);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_HEIGHT_LOW,  height_low);
+
+	if (!ret)
+		ret = reg_write(client, REG_OUT_TOTAL_WIDTH_HIGH, total_width_high);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_TOTAL_WIDTH_LOW, total_width_low);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_HIGH, total_height_high);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_LOW,  total_height_low);
+
+	return ret;
+}
+
+static int ov5642_try_fmt(struct v4l2_subdev *sd,
+			  struct v4l2_mbus_framefmt *mf)
+{
+	const struct ov5642_datafmt *fmt = ov5642_find_datafmt(mf->code);
+
+	dev_dbg(sd->v4l2_dev->dev, "%s(%u) width: %u heigth: %u\n",
+			__func__, mf->code, mf->width, mf->height);
+
+	if (!fmt) {
+		mf->code	= ov5642_colour_fmts[0].code;
+		mf->colorspace	= ov5642_colour_fmts[0].colorspace;
+	}
+
+	mf->width	= OV5642_WIDTH;
+	mf->height	= OV5642_HEIGHT;
+	mf->field	= V4L2_FIELD_NONE;
+
+	return 0;
+}
+
+static int ov5642_s_fmt(struct v4l2_subdev *sd,
+			struct v4l2_mbus_framefmt *mf)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov5642 *priv = to_ov5642(client);
+
+	dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code);
+
+	/* MIPI CSI could have changed the format, double-check */
+	if (!ov5642_find_datafmt(mf->code))
+		return -EINVAL;
+
+	ov5642_try_fmt(sd, mf);
+
+	priv->fmt = ov5642_find_datafmt(mf->code);
+
+	ov5642_write_array(client, ov5642_default_regs_init);
+	ov5642_set_resolution(client);
+	ov5642_write_array(client, ov5642_default_regs_finalise);
+
+	return 0;
+}
+
+static int ov5642_g_fmt(struct v4l2_subdev *sd,
+			struct v4l2_mbus_framefmt *mf)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov5642 *priv = to_ov5642(client);
+
+	const struct ov5642_datafmt *fmt = priv->fmt;
+
+	mf->code	= fmt->code;
+	mf->colorspace	= fmt->colorspace;
+	mf->width	= OV5642_WIDTH;
+	mf->height	= OV5642_HEIGHT;
+	mf->field	= V4L2_FIELD_NONE;
+
+	return 0;
+}
+
+static int ov5642_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
+			   enum v4l2_mbus_pixelcode *code)
+{
+	if (index >= ARRAY_SIZE(ov5642_colour_fmts))
+		return -EINVAL;
+
+	*code = ov5642_colour_fmts[index].code;
+	return 0;
+}
+
+static int ov5642_g_chip_ident(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_chip_ident *id)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
+		return -EINVAL;
+
+	if (id->match.addr != client->addr)
+		return -ENODEV;
+
+	id->ident	= V4L2_IDENT_OV5642;
+	id->revision	= 0;
+
+	return 0;
+}
+
+static int ov5642_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	struct v4l2_rect *rect = &a->c;
+
+	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	rect->top	= 0;
+	rect->left	= 0;
+	rect->width	= OV5642_WIDTH;
+	rect->height	= OV5642_HEIGHT;
+
+	return 0;
+}
+
+static int ov5642_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+	a->bounds.left			= 0;
+	a->bounds.top			= 0;
+	a->bounds.width			= OV5642_WIDTH;
+	a->bounds.height		= OV5642_HEIGHT;
+	a->defrect			= a->bounds;
+	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->pixelaspect.numerator	= 1;
+	a->pixelaspect.denominator	= 1;
+
+	return 0;
+}
+
+static struct v4l2_subdev_video_ops ov5642_subdev_video_ops = {
+	.s_mbus_fmt	= ov5642_s_fmt,
+	.g_mbus_fmt	= ov5642_g_fmt,
+	.try_mbus_fmt	= ov5642_try_fmt,
+	.enum_mbus_fmt	= ov5642_enum_fmt,
+	.g_crop		= ov5642_g_crop,
+	.cropcap	= ov5642_cropcap,
+};
+
+static struct v4l2_subdev_core_ops ov5642_subdev_core_ops = {
+	.g_chip_ident	= ov5642_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register	= ov5642_get_register,
+	.s_register	= ov5642_set_register,
+#endif
+};
+
+static struct v4l2_subdev_ops ov5642_subdev_ops = {
+	.core	= &ov5642_subdev_core_ops,
+	.video	= &ov5642_subdev_video_ops,
+};
+
+/*
+ * We have to provide soc-camera operations, but we don't have anything to say
+ * there. The MIPI CSI2 driver will provide .query_bus_param and .set_bus_param
+ */
+static unsigned long soc_ov5642_query_bus_param(struct soc_camera_device *icd)
+{
+	return 0;
+}
+
+static int soc_ov5642_set_bus_param(struct soc_camera_device *icd,
+				 unsigned long flags)
+{
+	return -EINVAL;
+}
+
+static struct soc_camera_ops soc_ov5642_ops = {
+	.query_bus_param	= soc_ov5642_query_bus_param,
+	.set_bus_param		= soc_ov5642_set_bus_param,
+};
+
+static int ov5642_video_probe(struct soc_camera_device *icd,
+			      struct i2c_client *client)
+{
+	int ret;
+	u8 id_high, id_low;
+	u16 id;
+
+	/* Read sensor Model ID */
+	ret = reg_read(client, REG_CHIP_ID_HIGH, &id_high);
+	if (ret < 0)
+		return ret;
+
+	id = id_high << 8;
+
+	ret = reg_read(client, REG_CHIP_ID_LOW, &id_low);
+	if (ret < 0)
+		return ret;
+
+	id |= id_low;
+
+	dev_info(&client->dev, "Chip ID 0x%04x detected\n", id);
+
+	if (id != 0x5642)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int ov5642_probe(struct i2c_client *client,
+			const struct i2c_device_id *did)
+{
+	struct ov5642 *priv;
+	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl;
+	int ret;
+
+	if (!icd) {
+		dev_err(&client->dev, "OV5642: missing soc-camera data!\n");
+		return -EINVAL;
+	}
+
+	icl = to_soc_camera_link(icd);
+	if (!icl) {
+		dev_err(&client->dev, "OV5642: missing platform data!\n");
+		return -EINVAL;
+	}
+
+	priv = kzalloc(sizeof(struct ov5642), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	v4l2_i2c_subdev_init(&priv->subdev, client, &ov5642_subdev_ops);
+
+	icd->ops	= &soc_ov5642_ops;
+	priv->fmt	= &ov5642_colour_fmts[0];
+
+	ret = ov5642_video_probe(icd, client);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	icd->ops = NULL;
+	kfree(priv);
+	return ret;
+}
+
+static int ov5642_remove(struct i2c_client *client)
+{
+	struct ov5642 *priv = to_ov5642(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+
+	icd->ops = NULL;
+	if (icl->free_bus)
+		icl->free_bus(icl);
+	kfree(priv);
+
+	return 0;
+}
+
+static const struct i2c_device_id ov5642_id[] = {
+	{ "ov5642", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ov5642_id);
+
+static struct i2c_driver ov5642_i2c_driver = {
+	.driver = {
+		.name = "ov5642",
+	},
+	.probe		= ov5642_probe,
+	.remove		= ov5642_remove,
+	.id_table	= ov5642_id,
+};
+
+static int __init ov5642_mod_init(void)
+{
+	return i2c_add_driver(&ov5642_i2c_driver);
+}
+
+static void __exit ov5642_mod_exit(void)
+{
+	i2c_del_driver(&ov5642_i2c_driver);
+}
+
+module_init(ov5642_mod_init);
+module_exit(ov5642_mod_exit);
+
+MODULE_DESCRIPTION("Omnivision OV5642 Camera driver");
+MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c
index d4e7c11..8aa0585 100644
--- a/drivers/media/video/ov7670.c
+++ b/drivers/media/video/ov7670.c
@@ -19,8 +19,7 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-mediabus.h>
-
-#include "ov7670.h"
+#include <media/ov7670.h>
 
 MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
 MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors");
diff --git a/drivers/media/video/ov7670.h b/drivers/media/video/ov7670.h
deleted file mode 100644
index b133bc1..0000000
--- a/drivers/media/video/ov7670.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * A V4L2 driver for OmniVision OV7670 cameras.
- *
- * Copyright 2010 One Laptop Per Child
- *
- * This file may be distributed under the terms of the GNU General
- * Public License, version 2.
- */
-
-#ifndef __OV7670_H
-#define __OV7670_H
-
-struct ov7670_config {
-	int min_width;			/* Filter out smaller sizes */
-	int min_height;			/* Filter out smaller sizes */
-	int clock_speed;		/* External clock speed (MHz) */
-	bool use_smbus;			/* Use smbus I/O instead of I2C */
-};
-
-#endif
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 48895ef..397870f 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -1032,13 +1032,9 @@ static int ov772x_video_probe(struct soc_camera_device *icd,
 	u8                  pid, ver;
 	const char         *devname;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * check and show product ID and manufacturer ID
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 5173ac4..3681a6f 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -657,16 +657,9 @@ static int ov9640_video_probe(struct soc_camera_device *icd,
 	const char	*devname;
 	int		ret = 0;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
-		dev_err(&client->dev, "Parent missing or invalid!\n");
-		ret = -ENODEV;
-		goto err;
-	}
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * check and show product ID and manufacturer ID
diff --git a/drivers/media/video/ov9740.c b/drivers/media/video/ov9740.c
index 4d4ee4f..edd1ffc 100644
--- a/drivers/media/video/ov9740.c
+++ b/drivers/media/video/ov9740.c
@@ -44,12 +44,12 @@
 #define OV9740_Y_ADDR_START_LO		0x0347
 #define OV9740_X_ADDR_END_HI		0x0348
 #define OV9740_X_ADDR_END_LO		0x0349
-#define OV9740_Y_ADDR_END_HI		0x034A
-#define OV9740_Y_ADDR_END_LO		0x034B
-#define OV9740_X_OUTPUT_SIZE_HI		0x034C
-#define OV9740_X_OUTPUT_SIZE_LO		0x034D
-#define OV9740_Y_OUTPUT_SIZE_HI		0x034E
-#define OV9740_Y_OUTPUT_SIZE_LO		0x034F
+#define OV9740_Y_ADDR_END_HI		0x034a
+#define OV9740_Y_ADDR_END_LO		0x034b
+#define OV9740_X_OUTPUT_SIZE_HI		0x034c
+#define OV9740_X_OUTPUT_SIZE_LO		0x034d
+#define OV9740_Y_OUTPUT_SIZE_HI		0x034e
+#define OV9740_Y_OUTPUT_SIZE_LO		0x034f
 
 /* IO Control Registers */
 #define OV9740_IO_CREL00		0x3002
@@ -68,6 +68,7 @@
 #define OV9740_ANALOG_CTRL04		0x3604
 #define OV9740_ANALOG_CTRL10		0x3610
 #define OV9740_ANALOG_CTRL12		0x3612
+#define OV9740_ANALOG_CTRL15		0x3615
 #define OV9740_ANALOG_CTRL20		0x3620
 #define OV9740_ANALOG_CTRL21		0x3621
 #define OV9740_ANALOG_CTRL22		0x3622
@@ -89,28 +90,28 @@
 #define OV9740_TIMING_CTRL35		0x3835
 
 /* Banding Filter */
-#define OV9740_AEC_MAXEXPO_60_H		0x3A02
-#define OV9740_AEC_MAXEXPO_60_L		0x3A03
-#define OV9740_AEC_B50_STEP_HI		0x3A08
-#define OV9740_AEC_B50_STEP_LO		0x3A09
-#define OV9740_AEC_B60_STEP_HI		0x3A0A
-#define OV9740_AEC_B60_STEP_LO		0x3A0B
-#define OV9740_AEC_CTRL0D		0x3A0D
-#define OV9740_AEC_CTRL0E		0x3A0E
-#define OV9740_AEC_MAXEXPO_50_H		0x3A14
-#define OV9740_AEC_MAXEXPO_50_L		0x3A15
+#define OV9740_AEC_MAXEXPO_60_H		0x3a02
+#define OV9740_AEC_MAXEXPO_60_L		0x3a03
+#define OV9740_AEC_B50_STEP_HI		0x3a08
+#define OV9740_AEC_B50_STEP_LO		0x3a09
+#define OV9740_AEC_B60_STEP_HI		0x3a0a
+#define OV9740_AEC_B60_STEP_LO		0x3a0b
+#define OV9740_AEC_CTRL0D		0x3a0d
+#define OV9740_AEC_CTRL0E		0x3a0e
+#define OV9740_AEC_MAXEXPO_50_H		0x3a14
+#define OV9740_AEC_MAXEXPO_50_L		0x3a15
 
 /* AEC/AGC Control */
 #define OV9740_AEC_ENABLE		0x3503
-#define OV9740_GAIN_CEILING_01		0x3A18
-#define OV9740_GAIN_CEILING_02		0x3A19
-#define OV9740_AEC_HI_THRESHOLD		0x3A11
-#define OV9740_AEC_3A1A			0x3A1A
-#define OV9740_AEC_CTRL1B_WPT2		0x3A1B
-#define OV9740_AEC_CTRL0F_WPT		0x3A0F
-#define OV9740_AEC_CTRL10_BPT		0x3A10
-#define OV9740_AEC_CTRL1E_BPT2		0x3A1E
-#define OV9740_AEC_LO_THRESHOLD		0x3A1F
+#define OV9740_GAIN_CEILING_01		0x3a18
+#define OV9740_GAIN_CEILING_02		0x3a19
+#define OV9740_AEC_HI_THRESHOLD		0x3a11
+#define OV9740_AEC_3A1A			0x3a1a
+#define OV9740_AEC_CTRL1B_WPT2		0x3a1b
+#define OV9740_AEC_CTRL0F_WPT		0x3a0f
+#define OV9740_AEC_CTRL10_BPT		0x3a10
+#define OV9740_AEC_CTRL1E_BPT2		0x3a1e
+#define OV9740_AEC_LO_THRESHOLD		0x3a1f
 
 /* BLC Control */
 #define OV9740_BLC_AUTO_ENABLE		0x4002
@@ -132,7 +133,7 @@
 #define OV9740_VT_SYS_CLK_DIV		0x0303
 #define OV9740_VT_PIX_CLK_DIV		0x0301
 #define OV9740_PLL_CTRL3010		0x3010
-#define OV9740_VFIFO_CTRL00		0x460E
+#define OV9740_VFIFO_CTRL00		0x460e
 
 /* ISP Control */
 #define OV9740_ISP_CTRL00		0x5000
@@ -141,9 +142,9 @@
 #define OV9740_ISP_CTRL05		0x5005
 #define OV9740_ISP_CTRL12		0x5012
 #define OV9740_ISP_CTRL19		0x5019
-#define OV9740_ISP_CTRL1A		0x501A
-#define OV9740_ISP_CTRL1E		0x501E
-#define OV9740_ISP_CTRL1F		0x501F
+#define OV9740_ISP_CTRL1A		0x501a
+#define OV9740_ISP_CTRL1E		0x501e
+#define OV9740_ISP_CTRL1F		0x501f
 #define OV9740_ISP_CTRL20		0x5020
 #define OV9740_ISP_CTRL21		0x5021
 
@@ -158,12 +159,12 @@
 #define OV9740_AWB_ADV_CTRL04		0x5187
 #define OV9740_AWB_ADV_CTRL05		0x5188
 #define OV9740_AWB_ADV_CTRL06		0x5189
-#define OV9740_AWB_ADV_CTRL07		0x518A
-#define OV9740_AWB_ADV_CTRL08		0x518B
-#define OV9740_AWB_ADV_CTRL09		0x518C
-#define OV9740_AWB_ADV_CTRL10		0x518D
-#define OV9740_AWB_ADV_CTRL11		0x518E
-#define OV9740_AWB_CTRL0F		0x518F
+#define OV9740_AWB_ADV_CTRL07		0x518a
+#define OV9740_AWB_ADV_CTRL08		0x518b
+#define OV9740_AWB_ADV_CTRL09		0x518c
+#define OV9740_AWB_ADV_CTRL10		0x518d
+#define OV9740_AWB_ADV_CTRL11		0x518e
+#define OV9740_AWB_CTRL0F		0x518f
 #define OV9740_AWB_CTRL10		0x5190
 #define OV9740_AWB_CTRL11		0x5191
 #define OV9740_AWB_CTRL12		0x5192
@@ -180,27 +181,8 @@
 #define OV9740_MIPI_CTRL_3012		0x3012
 #define OV9740_SC_CMMM_MIPI_CTR		0x3014
 
-/* supported resolutions */
-enum {
-	OV9740_VGA,
-	OV9740_720P,
-};
-
-struct ov9740_resolution {
-	unsigned int width;
-	unsigned int height;
-};
-
-static struct ov9740_resolution ov9740_resolutions[] = {
-	[OV9740_VGA] = {
-		.width	= 640,
-		.height	= 480,
-	},
-	[OV9740_720P] = {
-		.width	= 1280,
-		.height	= 720,
-	},
-};
+#define OV9740_MAX_WIDTH		1280
+#define OV9740_MAX_HEIGHT		720
 
 /* Misc. structures */
 struct ov9740_reg {
@@ -219,9 +201,16 @@ struct ov9740_priv {
 
 	bool				flag_vflip;
 	bool				flag_hflip;
+
+	/* For suspend/resume. */
+	struct v4l2_mbus_framefmt	current_mf;
+	bool				current_enable;
 };
 
 static const struct ov9740_reg ov9740_defaults[] = {
+	/* Software Reset */
+	{ OV9740_SOFTWARE_RESET,	0x01 },
+
 	/* Banding Filter */
 	{ OV9740_AEC_B50_STEP_HI,	0x00 },
 	{ OV9740_AEC_B50_STEP_LO,	0xe8 },
@@ -241,36 +230,36 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	/* Un-documented OV9740 registers */
 	{ 0x5800, 0x29 }, { 0x5801, 0x25 }, { 0x5802, 0x20 }, { 0x5803, 0x21 },
 	{ 0x5804, 0x26 }, { 0x5805, 0x2e }, { 0x5806, 0x11 }, { 0x5807, 0x0c },
-	{ 0x5808, 0x09 }, { 0x5809, 0x0a }, { 0x580A, 0x0e }, { 0x580B, 0x16 },
-	{ 0x580C, 0x06 }, { 0x580D, 0x02 }, { 0x580E, 0x00 }, { 0x580F, 0x00 },
+	{ 0x5808, 0x09 }, { 0x5809, 0x0a }, { 0x580a, 0x0e }, { 0x580b, 0x16 },
+	{ 0x580c, 0x06 }, { 0x580d, 0x02 }, { 0x580e, 0x00 }, { 0x580f, 0x00 },
 	{ 0x5810, 0x04 }, { 0x5811, 0x0a }, { 0x5812, 0x05 }, { 0x5813, 0x02 },
 	{ 0x5814, 0x00 }, { 0x5815, 0x00 }, { 0x5816, 0x03 }, { 0x5817, 0x09 },
-	{ 0x5818, 0x0f }, { 0x5819, 0x0a }, { 0x581A, 0x07 }, { 0x581B, 0x08 },
-	{ 0x581C, 0x0b }, { 0x581D, 0x14 }, { 0x581E, 0x28 }, { 0x581F, 0x23 },
+	{ 0x5818, 0x0f }, { 0x5819, 0x0a }, { 0x581a, 0x07 }, { 0x581b, 0x08 },
+	{ 0x581c, 0x0b }, { 0x581d, 0x14 }, { 0x581e, 0x28 }, { 0x581f, 0x23 },
 	{ 0x5820, 0x1d }, { 0x5821, 0x1e }, { 0x5822, 0x24 }, { 0x5823, 0x2a },
 	{ 0x5824, 0x4f }, { 0x5825, 0x6f }, { 0x5826, 0x5f }, { 0x5827, 0x7f },
-	{ 0x5828, 0x9f }, { 0x5829, 0x5f }, { 0x582A, 0x8f }, { 0x582B, 0x9e },
-	{ 0x582C, 0x8f }, { 0x582D, 0x9f }, { 0x582E, 0x4f }, { 0x582F, 0x87 },
+	{ 0x5828, 0x9f }, { 0x5829, 0x5f }, { 0x582a, 0x8f }, { 0x582b, 0x9e },
+	{ 0x582c, 0x8f }, { 0x582d, 0x9f }, { 0x582e, 0x4f }, { 0x582f, 0x87 },
 	{ 0x5830, 0x86 }, { 0x5831, 0x97 }, { 0x5832, 0xae }, { 0x5833, 0x3f },
 	{ 0x5834, 0x8e }, { 0x5835, 0x7c }, { 0x5836, 0x7e }, { 0x5837, 0xaf },
-	{ 0x5838, 0x8f }, { 0x5839, 0x8f }, { 0x583A, 0x9f }, { 0x583B, 0x7f },
-	{ 0x583C, 0x5f },
+	{ 0x5838, 0x8f }, { 0x5839, 0x8f }, { 0x583a, 0x9f }, { 0x583b, 0x7f },
+	{ 0x583c, 0x5f },
 
 	/* Y Gamma */
 	{ 0x5480, 0x07 }, { 0x5481, 0x18 }, { 0x5482, 0x2c }, { 0x5483, 0x4e },
 	{ 0x5484, 0x5e }, { 0x5485, 0x6b }, { 0x5486, 0x77 }, { 0x5487, 0x82 },
-	{ 0x5488, 0x8c }, { 0x5489, 0x95 }, { 0x548A, 0xa4 }, { 0x548B, 0xb1 },
-	{ 0x548C, 0xc6 }, { 0x548D, 0xd8 }, { 0x548E, 0xe9 },
+	{ 0x5488, 0x8c }, { 0x5489, 0x95 }, { 0x548a, 0xa4 }, { 0x548b, 0xb1 },
+	{ 0x548c, 0xc6 }, { 0x548d, 0xd8 }, { 0x548e, 0xe9 },
 
 	/* UV Gamma */
 	{ 0x5490, 0x0f }, { 0x5491, 0xff }, { 0x5492, 0x0d }, { 0x5493, 0x05 },
 	{ 0x5494, 0x07 }, { 0x5495, 0x1a }, { 0x5496, 0x04 }, { 0x5497, 0x01 },
-	{ 0x5498, 0x03 }, { 0x5499, 0x53 }, { 0x549A, 0x02 }, { 0x549B, 0xeb },
-	{ 0x549C, 0x02 }, { 0x549D, 0xa0 }, { 0x549E, 0x02 }, { 0x549F, 0x67 },
-	{ 0x54A0, 0x02 }, { 0x54A1, 0x3b }, { 0x54A2, 0x02 }, { 0x54A3, 0x18 },
-	{ 0x54A4, 0x01 }, { 0x54A5, 0xe7 }, { 0x54A6, 0x01 }, { 0x54A7, 0xc3 },
-	{ 0x54A8, 0x01 }, { 0x54A9, 0x94 }, { 0x54AA, 0x01 }, { 0x54AB, 0x72 },
-	{ 0x54AC, 0x01 }, { 0x54AD, 0x57 },
+	{ 0x5498, 0x03 }, { 0x5499, 0x53 }, { 0x549a, 0x02 }, { 0x549b, 0xeb },
+	{ 0x549c, 0x02 }, { 0x549d, 0xa0 }, { 0x549e, 0x02 }, { 0x549f, 0x67 },
+	{ 0x54a0, 0x02 }, { 0x54a1, 0x3b }, { 0x54a2, 0x02 }, { 0x54a3, 0x18 },
+	{ 0x54a4, 0x01 }, { 0x54a5, 0xe7 }, { 0x54a6, 0x01 }, { 0x54a7, 0xc3 },
+	{ 0x54a8, 0x01 }, { 0x54a9, 0x94 }, { 0x54aa, 0x01 }, { 0x54ab, 0x72 },
+	{ 0x54ac, 0x01 }, { 0x54ad, 0x57 },
 
 	/* AWB */
 	{ OV9740_AWB_CTRL00,		0xf0 },
@@ -296,18 +285,18 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	{ OV9740_AWB_CTRL14,		0x00 },
 
 	/* CIP */
-	{ 0x530D, 0x12 },
+	{ 0x530d, 0x12 },
 
 	/* CMX */
 	{ 0x5380, 0x01 }, { 0x5381, 0x00 }, { 0x5382, 0x00 }, { 0x5383, 0x17 },
 	{ 0x5384, 0x00 }, { 0x5385, 0x01 }, { 0x5386, 0x00 }, { 0x5387, 0x00 },
-	{ 0x5388, 0x00 }, { 0x5389, 0xe0 }, { 0x538A, 0x00 }, { 0x538B, 0x20 },
-	{ 0x538C, 0x00 }, { 0x538D, 0x00 }, { 0x538E, 0x00 }, { 0x538F, 0x16 },
+	{ 0x5388, 0x00 }, { 0x5389, 0xe0 }, { 0x538a, 0x00 }, { 0x538b, 0x20 },
+	{ 0x538c, 0x00 }, { 0x538d, 0x00 }, { 0x538e, 0x00 }, { 0x538f, 0x16 },
 	{ 0x5390, 0x00 }, { 0x5391, 0x9c }, { 0x5392, 0x00 }, { 0x5393, 0xa0 },
 	{ 0x5394, 0x18 },
 
 	/* 50/60 Detection */
-	{ 0x3C0A, 0x9c }, { 0x3C0B, 0x3f },
+	{ 0x3c0a, 0x9c }, { 0x3c0b, 0x3f },
 
 	/* Output Select */
 	{ OV9740_IO_OUTPUT_SEL01,	0x00 },
@@ -333,6 +322,7 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	{ OV9740_ANALOG_CTRL10,		0xa1 },
 	{ OV9740_ANALOG_CTRL12,		0x24 },
 	{ OV9740_ANALOG_CTRL22,		0x9f },
+	{ OV9740_ANALOG_CTRL15,		0xf0 },
 
 	/* Sensor Control */
 	{ OV9740_SENSOR_CTRL03,		0x42 },
@@ -385,7 +375,7 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	{ OV9740_LN_LENGTH_PCK_LO,	0x62 },
 
 	/* MIPI Control */
-	{ OV9740_MIPI_CTRL00,		0x44 },
+	{ OV9740_MIPI_CTRL00,		0x44 }, /* 0x64 for discontinuous clk */
 	{ OV9740_MIPI_3837,		0x01 },
 	{ OV9740_MIPI_CTRL01,		0x0f },
 	{ OV9740_MIPI_CTRL03,		0x05 },
@@ -393,54 +383,9 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	{ OV9740_VFIFO_RD_CTRL,		0x16 },
 	{ OV9740_MIPI_CTRL_3012,	0x70 },
 	{ OV9740_SC_CMMM_MIPI_CTR,	0x01 },
-};
-
-static const struct ov9740_reg ov9740_regs_vga[] = {
-	{ OV9740_X_ADDR_START_HI,	0x00 },
-	{ OV9740_X_ADDR_START_LO,	0xa0 },
-	{ OV9740_Y_ADDR_START_HI,	0x00 },
-	{ OV9740_Y_ADDR_START_LO,	0x00 },
-	{ OV9740_X_ADDR_END_HI,		0x04 },
-	{ OV9740_X_ADDR_END_LO,		0x63 },
-	{ OV9740_Y_ADDR_END_HI,		0x02 },
-	{ OV9740_Y_ADDR_END_LO,		0xd3 },
-	{ OV9740_X_OUTPUT_SIZE_HI,	0x02 },
-	{ OV9740_X_OUTPUT_SIZE_LO,	0x80 },
-	{ OV9740_Y_OUTPUT_SIZE_HI,	0x01 },
-	{ OV9740_Y_OUTPUT_SIZE_LO,	0xe0 },
-	{ OV9740_ISP_CTRL1E,		0x03 },
-	{ OV9740_ISP_CTRL1F,		0xc0 },
-	{ OV9740_ISP_CTRL20,		0x02 },
-	{ OV9740_ISP_CTRL21,		0xd0 },
-	{ OV9740_VFIFO_READ_START_HI,	0x01 },
-	{ OV9740_VFIFO_READ_START_LO,	0x40 },
-	{ OV9740_ISP_CTRL00,		0xff },
-	{ OV9740_ISP_CTRL01,		0xff },
-	{ OV9740_ISP_CTRL03,		0xff },
-};
 
-static const struct ov9740_reg ov9740_regs_720p[] = {
-	{ OV9740_X_ADDR_START_HI,	0x00 },
-	{ OV9740_X_ADDR_START_LO,	0x00 },
-	{ OV9740_Y_ADDR_START_HI,	0x00 },
-	{ OV9740_Y_ADDR_START_LO,	0x00 },
-	{ OV9740_X_ADDR_END_HI,		0x05 },
-	{ OV9740_X_ADDR_END_LO,		0x03 },
-	{ OV9740_Y_ADDR_END_HI,		0x02 },
-	{ OV9740_Y_ADDR_END_LO,		0xd3 },
-	{ OV9740_X_OUTPUT_SIZE_HI,	0x05 },
-	{ OV9740_X_OUTPUT_SIZE_LO,	0x00 },
-	{ OV9740_Y_OUTPUT_SIZE_HI,	0x02 },
-	{ OV9740_Y_OUTPUT_SIZE_LO,	0xd0 },
-	{ OV9740_ISP_CTRL1E,		0x05 },
-	{ OV9740_ISP_CTRL1F,		0x00 },
-	{ OV9740_ISP_CTRL20,		0x02 },
-	{ OV9740_ISP_CTRL21,		0xd0 },
-	{ OV9740_VFIFO_READ_START_HI,	0x02 },
-	{ OV9740_VFIFO_READ_START_LO,	0x30 },
-	{ OV9740_ISP_CTRL00,		0xff },
-	{ OV9740_ISP_CTRL01,		0xef },
-	{ OV9740_ISP_CTRL03,		0xff },
+	/* YUYV order */
+	{ OV9740_ISP_CTRL19,		0x02 },
 };
 
 static enum v4l2_mbus_pixelcode ov9740_codes[] = {
@@ -537,7 +482,8 @@ static int ov9740_reg_rmw(struct i2c_client *client, u16 reg, u8 set, u8 unset)
 	ret = ov9740_reg_read(client, reg, &val);
 	if (ret < 0) {
 		dev_err(&client->dev,
-			"[Read]-Modify-Write of register %02x failed!\n", reg);
+			"[Read]-Modify-Write of register 0x%04x failed!\n",
+			reg);
 		return ret;
 	}
 
@@ -547,7 +493,8 @@ static int ov9740_reg_rmw(struct i2c_client *client, u16 reg, u8 set, u8 unset)
 	ret = ov9740_reg_write(client, reg, val);
 	if (ret < 0) {
 		dev_err(&client->dev,
-			"Read-Modify-[Write] of register %02x failed!\n", reg);
+			"Read-Modify-[Write] of register 0x%04x failed!\n",
+			reg);
 		return ret;
 	}
 
@@ -608,6 +555,8 @@ static int ov9740_s_stream(struct v4l2_subdev *sd, int enable)
 					       0x00);
 	}
 
+	priv->current_enable = enable;
+
 	return ret;
 }
 
@@ -630,126 +579,127 @@ static unsigned long ov9740_query_bus_param(struct soc_camera_device *icd)
 	return soc_camera_apply_sensor_flags(icl, flags);
 }
 
-/* Get status of additional camera capabilities */
-static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct ov9740_priv *priv = to_ov9740(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		ctrl->value = priv->flag_vflip;
-		break;
-	case V4L2_CID_HFLIP:
-		ctrl->value = priv->flag_hflip;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* Set status of additional camera capabilities */
-static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct ov9740_priv *priv = to_ov9740(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		priv->flag_vflip = ctrl->value;
-		break;
-	case V4L2_CID_HFLIP:
-		priv->flag_hflip = ctrl->value;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* Get chip identification */
-static int ov9740_g_chip_ident(struct v4l2_subdev *sd,
-			       struct v4l2_dbg_chip_ident *id)
+/* select nearest higher resolution for capture */
+static void ov9740_res_roundup(u32 *width, u32 *height)
 {
-	struct ov9740_priv *priv = to_ov9740(sd);
+	/* Width must be a multiple of 4 pixels. */
+	*width = ALIGN(*width, 4);
 
-	id->ident = priv->ident;
-	id->revision = priv->revision;
+	/* Max resolution is 1280x720 (720p). */
+	if (*width > OV9740_MAX_WIDTH)
+		*width = OV9740_MAX_WIDTH;
 
-	return 0;
+	if (*height > OV9740_MAX_HEIGHT)
+		*height = OV9740_MAX_HEIGHT;
 }
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int ov9740_get_register(struct v4l2_subdev *sd,
-			       struct v4l2_dbg_register *reg)
+/* Setup registers according to resolution and color encoding */
+static int ov9740_set_res(struct i2c_client *client, u32 width, u32 height)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u32 x_start;
+	u32 y_start;
+	u32 x_end;
+	u32 y_end;
+	bool scaling = 0;
+	u32 scale_input_x;
+	u32 scale_input_y;
 	int ret;
-	u8 val;
-
-	if (reg->reg & ~0xffff)
-		return -EINVAL;
 
-	reg->size = 2;
-
-	ret = ov9740_reg_read(client, reg->reg, &val);
-	if (ret)
-		return ret;
-
-	reg->val = (__u64)val;
+	if ((width != OV9740_MAX_WIDTH) || (height != OV9740_MAX_HEIGHT))
+		scaling = 1;
 
-	return ret;
-}
-
-static int ov9740_set_register(struct v4l2_subdev *sd,
-			       struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	/*
+	 * Try to use as much of the sensor area as possible when supporting
+	 * smaller resolutions.  Depending on the aspect ratio of the
+	 * chosen resolution, we can either use the full width of the sensor,
+	 * or the full height of the sensor (or both if the aspect ratio is
+	 * the same as 1280x720.
+	 */
+	if ((OV9740_MAX_WIDTH * height) > (OV9740_MAX_HEIGHT * width)) {
+		scale_input_x = (OV9740_MAX_HEIGHT * width) / height;
+		scale_input_y = OV9740_MAX_HEIGHT;
+	} else {
+		scale_input_x = OV9740_MAX_WIDTH;
+		scale_input_y = (OV9740_MAX_WIDTH * height) / width;
+	}
 
-	if (reg->reg & ~0xffff || reg->val & ~0xff)
-		return -EINVAL;
+	/* These describe the area of the sensor to use. */
+	x_start = (OV9740_MAX_WIDTH - scale_input_x) / 2;
+	y_start = (OV9740_MAX_HEIGHT - scale_input_y) / 2;
+	x_end = x_start + scale_input_x - 1;
+	y_end = y_start + scale_input_y - 1;
 
-	return ov9740_reg_write(client, reg->reg, reg->val);
-}
-#endif
+	ret = ov9740_reg_write(client, OV9740_X_ADDR_START_HI, x_start >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_X_ADDR_START_LO, x_start & 0xff);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_HI, y_start >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_LO, y_start & 0xff);
+	if (ret)
+		goto done;
 
-/* select nearest higher resolution for capture */
-static void ov9740_res_roundup(u32 *width, u32 *height)
-{
-	int i;
+	ret = ov9740_reg_write(client, OV9740_X_ADDR_END_HI, x_end >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_X_ADDR_END_LO, x_end & 0xff);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_HI, y_end >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_LO, y_end & 0xff);
+	if (ret)
+		goto done;
 
-	for (i = 0; i < ARRAY_SIZE(ov9740_resolutions); i++)
-		if ((ov9740_resolutions[i].width >= *width) &&
-		    (ov9740_resolutions[i].height >= *height)) {
-			*width = ov9740_resolutions[i].width;
-			*height = ov9740_resolutions[i].height;
-			return;
-		}
+	ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_HI, width >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_LO, width & 0xff);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_HI, height >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_LO, height & 0xff);
+	if (ret)
+		goto done;
 
-	*width = ov9740_resolutions[OV9740_720P].width;
-	*height = ov9740_resolutions[OV9740_720P].height;
-}
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL1E, scale_input_x >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL1F, scale_input_x & 0xff);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL20, scale_input_y >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL21, scale_input_y & 0xff);
+	if (ret)
+		goto done;
 
-/* Setup registers according to resolution and color encoding */
-static int ov9740_set_res(struct i2c_client *client, u32 width)
-{
-	int ret;
+	ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_HI,
+			       (scale_input_x - width) >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_LO,
+			       (scale_input_x - width) & 0xff);
+	if (ret)
+		goto done;
 
-	/* select register configuration for given resolution */
-	if (width == ov9740_resolutions[OV9740_VGA].width) {
-		dev_dbg(&client->dev, "Setting image size to 640x480\n");
-		ret = ov9740_reg_write_array(client, ov9740_regs_vga,
-					     ARRAY_SIZE(ov9740_regs_vga));
-	} else if (width == ov9740_resolutions[OV9740_720P].width) {
-		dev_dbg(&client->dev, "Setting image size to 1280x720\n");
-		ret = ov9740_reg_write_array(client, ov9740_regs_720p,
-					     ARRAY_SIZE(ov9740_regs_720p));
-	} else {
-		dev_err(&client->dev, "Failed to select resolution!\n");
-		return -EINVAL;
-	}
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL00, 0xff);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL01, 0xef |
+							  (scaling << 4));
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL03, 0xff);
 
+done:
 	return ret;
 }
 
@@ -758,6 +708,7 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd,
 			struct v4l2_mbus_framefmt *mf)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov9740_priv *priv = to_ov9740(sd);
 	enum v4l2_colorspace cspace;
 	enum v4l2_mbus_pixelcode code = mf->code;
 	int ret;
@@ -777,13 +728,15 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd,
 	if (ret < 0)
 		return ret;
 
-	ret = ov9740_set_res(client, mf->width);
+	ret = ov9740_set_res(client, mf->width, mf->height);
 	if (ret < 0)
 		return ret;
 
 	mf->code	= code;
 	mf->colorspace	= cspace;
 
+	memcpy(&priv->current_mf, mf, sizeof(struct v4l2_mbus_framefmt));
+
 	return ret;
 }
 
@@ -814,8 +767,8 @@ static int ov9740_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 {
 	a->bounds.left		= 0;
 	a->bounds.top		= 0;
-	a->bounds.width		= ov9740_resolutions[OV9740_720P].width;
-	a->bounds.height	= ov9740_resolutions[OV9740_720P].height;
+	a->bounds.width		= OV9740_MAX_WIDTH;
+	a->bounds.height	= OV9740_MAX_HEIGHT;
 	a->defrect		= a->bounds;
 	a->type			= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	a->pixelaspect.numerator	= 1;
@@ -828,13 +781,115 @@ static int ov9740_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
 	a->c.left		= 0;
 	a->c.top		= 0;
-	a->c.width		= ov9740_resolutions[OV9740_720P].width;
-	a->c.height		= ov9740_resolutions[OV9740_720P].height;
+	a->c.width		= OV9740_MAX_WIDTH;
+	a->c.height		= OV9740_MAX_HEIGHT;
 	a->type			= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 
 	return 0;
 }
 
+/* Get status of additional camera capabilities */
+static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct ov9740_priv *priv = to_ov9740(sd);
+
+	switch (ctrl->id) {
+	case V4L2_CID_VFLIP:
+		ctrl->value = priv->flag_vflip;
+		break;
+	case V4L2_CID_HFLIP:
+		ctrl->value = priv->flag_hflip;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Set status of additional camera capabilities */
+static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct ov9740_priv *priv = to_ov9740(sd);
+
+	switch (ctrl->id) {
+	case V4L2_CID_VFLIP:
+		priv->flag_vflip = ctrl->value;
+		break;
+	case V4L2_CID_HFLIP:
+		priv->flag_hflip = ctrl->value;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Get chip identification */
+static int ov9740_g_chip_ident(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_chip_ident *id)
+{
+	struct ov9740_priv *priv = to_ov9740(sd);
+
+	id->ident = priv->ident;
+	id->revision = priv->revision;
+
+	return 0;
+}
+
+static int ov9740_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct ov9740_priv *priv = to_ov9740(sd);
+
+	if (!priv->current_enable)
+		return 0;
+
+	if (on) {
+		ov9740_s_fmt(sd, &priv->current_mf);
+		ov9740_s_stream(sd, priv->current_enable);
+	} else {
+		ov9740_s_stream(sd, 0);
+		priv->current_enable = true;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov9740_get_register(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+	u8 val;
+
+	if (reg->reg & ~0xffff)
+		return -EINVAL;
+
+	reg->size = 2;
+
+	ret = ov9740_reg_read(client, reg->reg, &val);
+	if (ret)
+		return ret;
+
+	reg->val = (__u64)val;
+
+	return ret;
+}
+
+static int ov9740_set_register(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (reg->reg & ~0xffff || reg->val & ~0xff)
+		return -EINVAL;
+
+	return ov9740_reg_write(client, reg->reg, reg->val);
+}
+#endif
+
 static int ov9740_video_probe(struct soc_camera_device *icd,
 			      struct i2c_client *client)
 {
@@ -843,16 +898,9 @@ static int ov9740_video_probe(struct soc_camera_device *icd,
 	u8 modelhi, modello;
 	int ret;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
-		dev_err(&client->dev, "Parent missing or invalid!\n");
-		ret = -ENODEV;
-		goto err;
-	}
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * check and show product ID and manufacturer ID
@@ -901,24 +949,24 @@ static struct soc_camera_ops ov9740_ops = {
 	.num_controls		= ARRAY_SIZE(ov9740_controls),
 };
 
+static struct v4l2_subdev_video_ops ov9740_video_ops = {
+	.s_stream		= ov9740_s_stream,
+	.s_mbus_fmt		= ov9740_s_fmt,
+	.try_mbus_fmt		= ov9740_try_fmt,
+	.enum_mbus_fmt		= ov9740_enum_fmt,
+	.cropcap		= ov9740_cropcap,
+	.g_crop			= ov9740_g_crop,
+};
+
 static struct v4l2_subdev_core_ops ov9740_core_ops = {
 	.g_ctrl			= ov9740_g_ctrl,
 	.s_ctrl			= ov9740_s_ctrl,
 	.g_chip_ident		= ov9740_g_chip_ident,
+	.s_power		= ov9740_s_power,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register		= ov9740_get_register,
 	.s_register		= ov9740_set_register,
 #endif
-
-};
-
-static struct v4l2_subdev_video_ops ov9740_video_ops = {
-	.s_stream		= ov9740_s_stream,
-	.s_mbus_fmt		= ov9740_s_fmt,
-	.try_mbus_fmt		= ov9740_try_fmt,
-	.enum_mbus_fmt		= ov9740_enum_fmt,
-	.cropcap		= ov9740_cropcap,
-	.g_crop			= ov9740_g_crop,
 };
 
 static struct v4l2_subdev_ops ov9740_subdev_ops = {
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index 7551907..e753b5e 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -28,7 +28,6 @@
 #include <linux/mm.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <asm/io.h>
@@ -39,7 +38,7 @@
 #include <media/v4l2-device.h>
 
 MODULE_LICENSE("GPL");
-
+MODULE_VERSION("0.0.4");
 
 #define MOTOROLA	1
 #define PHILIPS2	2               /* SAA7191 */
@@ -678,7 +677,6 @@ static int pms_querycap(struct file *file, void  *priv,
 	strlcpy(vcap->driver, dev->v4l2_dev.name, sizeof(vcap->driver));
 	strlcpy(vcap->card, "Mediavision PMS", sizeof(vcap->card));
 	strlcpy(vcap->bus_info, "ISA", sizeof(vcap->bus_info));
-	vcap->version = KERNEL_VERSION(0, 0, 3);
 	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c
index 2254194..c1d9bb6 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-main.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-main.c
@@ -168,6 +168,7 @@ module_exit(pvr_exit);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.9.1");
 
 
 /*
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index 3876114..e27f8ab 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -91,7 +91,7 @@ static struct v4l2_capability pvr_capability ={
 	.driver         = "pvrusb2",
 	.card           = "Hauppauge WinTV pvr-usb2",
 	.bus_info       = "usb",
-	.version        = KERNEL_VERSION(0, 9, 0),
+	.version        = LINUX_VERSION_CODE,
 	.capabilities   = (V4L2_CAP_VIDEO_CAPTURE |
 			   V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_RADIO |
 			   V4L2_CAP_READWRITE),
@@ -369,11 +369,6 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		break;
 	}
 
-	case VIDIOC_S_AUDIO:
-	{
-		ret = -EINVAL;
-		break;
-	}
 	case VIDIOC_G_TUNER:
 	{
 		struct v4l2_tuner *vt = (struct v4l2_tuner *)arg;
@@ -850,7 +845,7 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 #endif
 
 	default :
-		ret = -EINVAL;
+		ret = -ENOTTY;
 		break;
 	}
 
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig
index 8da42e4..d63d0a8 100644
--- a/drivers/media/video/pwc/Kconfig
+++ b/drivers/media/video/pwc/Kconfig
@@ -1,6 +1,7 @@
 config USB_PWC
 	tristate "USB Philips Cameras"
 	depends on VIDEO_V4L2
+	select VIDEOBUF2_VMALLOC
 	---help---
 	  Say Y or M here if you want to use one of these Philips & OEM
 	  webcams:
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 760b4de..3977add 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -3,6 +3,7 @@
    video modes.
    (C) 1999-2003 Nemosoft Unv.
    (C) 2004-2006 Luc Saillard (luc@saillard.org)
+   (C) 2011 Hans de Goede <hdegoede@redhat.com>
 
    NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
    driver and thus may have bugs that are not present in the original version.
@@ -43,61 +44,12 @@
 #include <asm/errno.h>
 
 #include "pwc.h"
-#include "pwc-uncompress.h"
 #include "pwc-kiara.h"
 #include "pwc-timon.h"
 #include "pwc-dec1.h"
 #include "pwc-dec23.h"
 
-/* Request types: video */
-#define SET_LUM_CTL			0x01
-#define GET_LUM_CTL			0x02
-#define SET_CHROM_CTL			0x03
-#define GET_CHROM_CTL			0x04
-#define SET_STATUS_CTL			0x05
-#define GET_STATUS_CTL			0x06
-#define SET_EP_STREAM_CTL		0x07
-#define GET_EP_STREAM_CTL		0x08
-#define GET_XX_CTL			0x09
-#define SET_XX_CTL			0x0A
-#define GET_XY_CTL			0x0B
-#define SET_XY_CTL			0x0C
-#define SET_MPT_CTL			0x0D
-#define GET_MPT_CTL			0x0E
-
-/* Selectors for the Luminance controls [GS]ET_LUM_CTL */
-#define AGC_MODE_FORMATTER			0x2000
-#define PRESET_AGC_FORMATTER			0x2100
-#define SHUTTER_MODE_FORMATTER			0x2200
-#define PRESET_SHUTTER_FORMATTER		0x2300
-#define PRESET_CONTOUR_FORMATTER		0x2400
-#define AUTO_CONTOUR_FORMATTER			0x2500
-#define BACK_LIGHT_COMPENSATION_FORMATTER	0x2600
-#define CONTRAST_FORMATTER			0x2700
-#define DYNAMIC_NOISE_CONTROL_FORMATTER		0x2800
-#define FLICKERLESS_MODE_FORMATTER		0x2900
-#define AE_CONTROL_SPEED			0x2A00
-#define BRIGHTNESS_FORMATTER			0x2B00
-#define GAMMA_FORMATTER				0x2C00
-
-/* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */
-#define WB_MODE_FORMATTER			0x1000
-#define AWB_CONTROL_SPEED_FORMATTER		0x1100
-#define AWB_CONTROL_DELAY_FORMATTER		0x1200
-#define PRESET_MANUAL_RED_GAIN_FORMATTER	0x1300
-#define PRESET_MANUAL_BLUE_GAIN_FORMATTER	0x1400
-#define COLOUR_MODE_FORMATTER			0x1500
-#define SATURATION_MODE_FORMATTER1		0x1600
-#define SATURATION_MODE_FORMATTER2		0x1700
-
-/* Selectors for the Status controls [GS]ET_STATUS_CTL */
-#define SAVE_USER_DEFAULTS_FORMATTER		0x0200
-#define RESTORE_USER_DEFAULTS_FORMATTER		0x0300
-#define RESTORE_FACTORY_DEFAULTS_FORMATTER	0x0400
-#define READ_AGC_FORMATTER			0x0500
-#define READ_SHUTTER_FORMATTER			0x0600
-#define READ_RED_GAIN_FORMATTER			0x0700
-#define READ_BLUE_GAIN_FORMATTER		0x0800
+/* Selectors for status controls used only in this file */
 #define GET_STATUS_B00				0x0B00
 #define SENSOR_TYPE_FORMATTER1			0x0C00
 #define GET_STATUS_3000				0x3000
@@ -116,11 +68,6 @@
 /* Formatters for the Video Endpoint controls [GS]ET_EP_STREAM_CTL */
 #define VIDEO_OUTPUT_CONTROL_FORMATTER		0x0100
 
-/* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */
-#define PT_RELATIVE_CONTROL_FORMATTER		0x01
-#define PT_RESET_CONTROL_FORMATTER		0x02
-#define PT_STATUS_FORMATTER			0x03
-
 static const char *size2name[PSZ_MAX] =
 {
 	"subQCIF",
@@ -160,7 +107,7 @@ static void pwc_set_image_buffer_size(struct pwc_device *pdev);
 /****************************************************************************/
 
 static int _send_control_msg(struct pwc_device *pdev,
-	u8 request, u16 value, int index, void *buf, int buflen, int timeout)
+	u8 request, u16 value, int index, void *buf, int buflen)
 {
 	int rc;
 	void *kbuf = NULL;
@@ -177,7 +124,7 @@ static int _send_control_msg(struct pwc_device *pdev,
 		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		value,
 		index,
-		kbuf, buflen, timeout);
+		kbuf, buflen, USB_CTRL_SET_TIMEOUT);
 
 	kfree(kbuf);
 	return rc;
@@ -197,9 +144,13 @@ static int recv_control_msg(struct pwc_device *pdev,
 		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		value,
 		pdev->vcinterface,
-		kbuf, buflen, 500);
+		kbuf, buflen, USB_CTRL_GET_TIMEOUT);
 	memcpy(buf, kbuf, buflen);
 	kfree(kbuf);
+
+	if (rc < 0)
+		PWC_ERROR("recv_control_msg error %d req %02x val %04x\n",
+			  rc, request, value);
 	return rc;
 }
 
@@ -210,18 +161,16 @@ static inline int send_video_command(struct pwc_device *pdev,
 		SET_EP_STREAM_CTL,
 		VIDEO_OUTPUT_CONTROL_FORMATTER,
 		index,
-		buf, buflen, 1000);
+		buf, buflen);
 }
 
-static inline int send_control_msg(struct pwc_device *pdev,
+int send_control_msg(struct pwc_device *pdev,
 	u8 request, u16 value, void *buf, int buflen)
 {
 	return _send_control_msg(pdev,
-		request, value, pdev->vcinterface, buf, buflen, 500);
+		request, value, pdev->vcinterface, buf, buflen);
 }
 
-
-
 static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
 {
 	unsigned char buf[3];
@@ -261,8 +210,11 @@ static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
 		PWC_DEBUG_MODULE("Failed to send video command... %d\n", ret);
 		return ret;
 	}
-	if (pEntry->compressed && pdev->pixfmt == V4L2_PIX_FMT_YUV420)
-		pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data);
+	if (pEntry->compressed && pdev->pixfmt == V4L2_PIX_FMT_YUV420) {
+		ret = pwc_dec1_init(pdev, pdev->type, pdev->release, buf);
+		if (ret < 0)
+			return ret;
+	}
 
 	pdev->cmd_len = 3;
 	memcpy(pdev->cmd_buf, buf, 3);
@@ -321,8 +273,11 @@ static int set_video_mode_Timon(struct pwc_device *pdev, int size, int frames, i
 	if (ret < 0)
 		return ret;
 
-	if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420)
-		pwc_dec23_init(pdev, pdev->type, buf);
+	if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420) {
+		ret = pwc_dec23_init(pdev, pdev->type, buf);
+		if (ret < 0)
+			return ret;
+	}
 
 	pdev->cmd_len = 13;
 	memcpy(pdev->cmd_buf, buf, 13);
@@ -394,8 +349,11 @@ static int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, i
 	if (ret < 0)
 		return ret;
 
-	if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420)
-		pwc_dec23_init(pdev, pdev->type, buf);
+	if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420) {
+		ret = pwc_dec23_init(pdev, pdev->type, buf);
+		if (ret < 0)
+			return ret;
+	}
 
 	pdev->cmd_len = 12;
 	memcpy(pdev->cmd_buf, buf, 12);
@@ -452,6 +410,7 @@ int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frame
 	}
 	pdev->view.x = width;
 	pdev->view.y = height;
+	pdev->vcompression = compression;
 	pdev->frame_total_size = pdev->frame_size + pdev->frame_header_size + pdev->frame_trailer_size;
 	pwc_set_image_buffer_size(pdev);
 	PWC_DEBUG_SIZE("Set viewport to %dx%d, image size is %dx%d.\n", width, height, pwc_image_sizes[size].x, pwc_image_sizes[size].y);
@@ -511,13 +470,9 @@ unsigned int pwc_get_fps(struct pwc_device *pdev, unsigned int index, unsigned i
 	return ret;
 }
 
-#define BLACK_Y 0
-#define BLACK_U 128
-#define BLACK_V 128
-
 static void pwc_set_image_buffer_size(struct pwc_device *pdev)
 {
-	int i, factor = 0;
+	int factor = 0;
 
 	/* for V4L2_PIX_FMT_YUV420 */
 	switch (pdev->pixfmt) {
@@ -541,442 +496,108 @@ static void pwc_set_image_buffer_size(struct pwc_device *pdev)
 	 */
 	pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC;
 	pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE;
-
-	/* Fill buffers with black colors */
-	for (i = 0; i < pwc_mbufs; i++) {
-		unsigned char *p = pdev->image_data + pdev->images[i].offset;
-		memset(p, BLACK_Y, pdev->view.x * pdev->view.y);
-		p += pdev->view.x * pdev->view.y;
-		memset(p, BLACK_U, pdev->view.x * pdev->view.y/4);
-		p += pdev->view.x * pdev->view.y/4;
-		memset(p, BLACK_V, pdev->view.x * pdev->view.y/4);
-	}
 }
 
-
-
-/* BRIGHTNESS */
-
-int pwc_get_brightness(struct pwc_device *pdev)
+int pwc_get_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data)
 {
-	char buf;
 	int ret;
+	u8 buf;
 
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
+	ret = recv_control_msg(pdev, request, value, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
-	return buf;
-}
 
-int pwc_set_brightness(struct pwc_device *pdev, int value)
-{
-	char buf;
-
-	if (value < 0)
-		value = 0;
-	if (value > 0xffff)
-		value = 0xffff;
-	buf = (value >> 9) & 0x7f;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
+	*data = buf;
+	return 0;
 }
 
-/* CONTRAST */
-
-int pwc_get_contrast(struct pwc_device *pdev)
+int pwc_set_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, u8 data)
 {
-	char buf;
 	int ret;
 
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
+	ret = send_control_msg(pdev, request, value, &data, sizeof(data));
 	if (ret < 0)
 		return ret;
-	return buf;
-}
 
-int pwc_set_contrast(struct pwc_device *pdev, int value)
-{
-	char buf;
-
-	if (value < 0)
-		value = 0;
-	if (value > 0xffff)
-		value = 0xffff;
-	buf = (value >> 10) & 0x3f;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
+	return 0;
 }
 
-/* GAMMA */
-
-int pwc_get_gamma(struct pwc_device *pdev)
+int pwc_get_s8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data)
 {
-	char buf;
 	int ret;
+	s8 buf;
 
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
+	ret = recv_control_msg(pdev, request, value, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
-	return buf;
-}
-
-int pwc_set_gamma(struct pwc_device *pdev, int value)
-{
-	char buf;
 
-	if (value < 0)
-		value = 0;
-	if (value > 0xffff)
-		value = 0xffff;
-	buf = (value >> 11) & 0x1f;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
-}
-
-
-/* SATURATION */
-
-/* return a value between [-100 , 100] */
-int pwc_get_saturation(struct pwc_device *pdev, int *value)
-{
-	char buf;
-	int ret, saturation_register;
-
-	if (pdev->type < 675)
-		return -EINVAL;
-	if (pdev->type < 730)
-		saturation_register = SATURATION_MODE_FORMATTER2;
-	else
-		saturation_register = SATURATION_MODE_FORMATTER1;
-	ret = recv_control_msg(pdev,
-		GET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*value = (signed)buf;
+	*data = buf;
 	return 0;
 }
 
-/* @param value saturation color between [-100 , 100] */
-int pwc_set_saturation(struct pwc_device *pdev, int value)
+int pwc_get_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data)
 {
-	char buf;
-	int saturation_register;
-
-	if (pdev->type < 675)
-		return -EINVAL;
-	if (value < -100)
-		value = -100;
-	if (value > 100)
-		value = 100;
-	if (pdev->type < 730)
-		saturation_register = SATURATION_MODE_FORMATTER2;
-	else
-		saturation_register = SATURATION_MODE_FORMATTER1;
-	return send_control_msg(pdev,
-		SET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
-}
-
-/* AGC */
-
-int pwc_set_agc(struct pwc_device *pdev, int mode, int value)
-{
-	char buf;
 	int ret;
+	u8 buf[2];
 
-	if (mode)
-		buf = 0x0; /* auto */
-	else
-		buf = 0xff; /* fixed */
-
-	ret = send_control_msg(pdev,
-		SET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
-
-	if (!mode && ret >= 0) {
-		if (value < 0)
-			value = 0;
-		if (value > 0xffff)
-			value = 0xffff;
-		buf = (value >> 10) & 0x3F;
-		ret = send_control_msg(pdev,
-			SET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
-	}
+	ret = recv_control_msg(pdev, request, value, buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
+
+	*data = (buf[1] << 8) | buf[0];
 	return 0;
 }
 
-int pwc_get_agc(struct pwc_device *pdev, int *value)
+int pwc_set_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, u16 data)
 {
-	unsigned char buf;
 	int ret;
+	u8 buf[2];
 
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
+	buf[0] = data & 0xff;
+	buf[1] = data >> 8;
+	ret = send_control_msg(pdev, request, value, buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 
-	if (buf != 0) { /* fixed */
-		ret = recv_control_msg(pdev,
-			GET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
-		if (ret < 0)
-			return ret;
-		if (buf > 0x3F)
-			buf = 0x3F;
-		*value = (buf << 10);
-	}
-	else { /* auto */
-		ret = recv_control_msg(pdev,
-			GET_STATUS_CTL, READ_AGC_FORMATTER, &buf, sizeof(buf));
-		if (ret < 0)
-			return ret;
-		/* Gah... this value ranges from 0x00 ... 0x9F */
-		if (buf > 0x9F)
-			buf = 0x9F;
-		*value = -(48 + buf * 409);
-	}
-
 	return 0;
 }
 
-int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value)
-{
-	char buf[2];
-	int speed, ret;
-
-
-	if (mode)
-		buf[0] = 0x0;	/* auto */
-	else
-		buf[0] = 0xff; /* fixed */
-
-	ret = send_control_msg(pdev,
-		SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, 1);
-
-	if (!mode && ret >= 0) {
-		if (value < 0)
-			value = 0;
-		if (value > 0xffff)
-			value = 0xffff;
-
-		if (DEVICE_USE_CODEC2(pdev->type)) {
-			/* speed ranges from 0x0 to 0x290 (656) */
-			speed = (value / 100);
-			buf[1] = speed >> 8;
-			buf[0] = speed & 0xff;
-		} else if (DEVICE_USE_CODEC3(pdev->type)) {
-			/* speed seems to range from 0x0 to 0xff */
-			buf[1] = 0;
-			buf[0] = value >> 8;
-		}
-
-		ret = send_control_msg(pdev,
-			SET_LUM_CTL, PRESET_SHUTTER_FORMATTER,
-			&buf, sizeof(buf));
-	}
-	return ret;
-}
-
-/* This function is not exported to v4l1, so output values between 0 -> 256 */
-int pwc_get_shutter_speed(struct pwc_device *pdev, int *value)
+int pwc_button_ctrl(struct pwc_device *pdev, u16 value)
 {
-	unsigned char buf[2];
 	int ret;
 
-	ret = recv_control_msg(pdev,
-		GET_STATUS_CTL, READ_SHUTTER_FORMATTER, &buf, sizeof(buf));
+	ret = send_control_msg(pdev, SET_STATUS_CTL, value, NULL, 0);
 	if (ret < 0)
 		return ret;
-	*value = buf[0] + (buf[1] << 8);
-	if (DEVICE_USE_CODEC2(pdev->type)) {
-		/* speed ranges from 0x0 to 0x290 (656) */
-		*value *= 256/656;
-	} else if (DEVICE_USE_CODEC3(pdev->type)) {
-		/* speed seems to range from 0x0 to 0xff */
-	}
+
 	return 0;
 }
 
-
 /* POWER */
-
-int pwc_camera_power(struct pwc_device *pdev, int power)
+void pwc_camera_power(struct pwc_device *pdev, int power)
 {
 	char buf;
+	int r;
+
+	if (!pdev->power_save)
+		return;
 
 	if (pdev->type < 675 || (pdev->type < 730 && pdev->release < 6))
-		return 0;	/* Not supported by Nala or Timon < release 6 */
+		return;	/* Not supported by Nala or Timon < release 6 */
 
 	if (power)
 		buf = 0x00; /* active */
 	else
 		buf = 0xFF; /* power save */
-	return send_control_msg(pdev,
+	r = send_control_msg(pdev,
 		SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER,
 		&buf, sizeof(buf));
-}
-
-
-
-/* private calls */
-
-int pwc_restore_user(struct pwc_device *pdev)
-{
-	return send_control_msg(pdev,
-		SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, NULL, 0);
-}
-
-int pwc_save_user(struct pwc_device *pdev)
-{
-	return send_control_msg(pdev,
-		SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, NULL, 0);
-}
-
-int pwc_restore_factory(struct pwc_device *pdev)
-{
-	return send_control_msg(pdev,
-		SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, NULL, 0);
-}
-
- /* ************************************************* */
- /* Patch by Alvarado: (not in the original version   */
-
- /*
-  * the camera recognizes modes from 0 to 4:
-  *
-  * 00: indoor (incandescant lighting)
-  * 01: outdoor (sunlight)
-  * 02: fluorescent lighting
-  * 03: manual
-  * 04: auto
-  */
-int pwc_set_awb(struct pwc_device *pdev, int mode)
-{
-	char buf;
-	int ret;
-
-	if (mode < 0)
-	    mode = 0;
-
-	if (mode > 4)
-	    mode = 4;
-
-	buf = mode & 0x07; /* just the lowest three bits */
-
-	ret = send_control_msg(pdev,
-		SET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
-
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-int pwc_get_awb(struct pwc_device *pdev)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
-
-	if (ret < 0)
-		return ret;
-	return buf;
-}
-
-int pwc_set_red_gain(struct pwc_device *pdev, int value)
-{
-	unsigned char buf;
-
-	if (value < 0)
-		value = 0;
-	if (value > 0xffff)
-		value = 0xffff;
-	/* only the msb is considered */
-	buf = value >> 8;
-	return send_control_msg(pdev,
-		SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
-		&buf, sizeof(buf));
-}
-
-int pwc_get_red_gain(struct pwc_device *pdev, int *value)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
-		&buf, sizeof(buf));
-	if (ret < 0)
-	    return ret;
-	*value = buf << 8;
-	return 0;
-}
-
-
-int pwc_set_blue_gain(struct pwc_device *pdev, int value)
-{
-	unsigned char buf;
-
-	if (value < 0)
-		value = 0;
-	if (value > 0xffff)
-		value = 0xffff;
-	/* only the msb is considered */
-	buf = value >> 8;
-	return send_control_msg(pdev,
-		SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
-		&buf, sizeof(buf));
-}
-
-int pwc_get_blue_gain(struct pwc_device *pdev, int *value)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
-		&buf, sizeof(buf));
-	if (ret < 0)
-	    return ret;
-	*value = buf << 8;
-	return 0;
-}
-
 
-/* The following two functions are different, since they only read the
-   internal red/blue gains, which may be different from the manual
-   gains set or read above.
- */
-static int pwc_read_red_gain(struct pwc_device *pdev, int *value)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*value = buf << 8;
-	return 0;
+	if (r < 0)
+		PWC_ERROR("Failed to power %s camera (%d)\n",
+			  power ? "on" : "off", r);
 }
 
-static int pwc_read_blue_gain(struct pwc_device *pdev, int *value)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*value = buf << 8;
-	return 0;
-}
-
-
 static int pwc_set_wb_speed(struct pwc_device *pdev, int speed)
 {
 	unsigned char buf;
@@ -1028,6 +649,7 @@ static int pwc_get_wb_delay(struct pwc_device *pdev, int *value)
 int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value)
 {
 	unsigned char buf[2];
+	int r;
 
 	if (pdev->type < 730)
 		return 0;
@@ -1045,8 +667,12 @@ int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value)
 	buf[0] = on_value;
 	buf[1] = off_value;
 
-	return send_control_msg(pdev,
+	r = send_control_msg(pdev,
 		SET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
+	if (r < 0)
+		PWC_ERROR("Failed to set LED on/off time (%d)\n", r);
+
+	return r;
 }
 
 static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
@@ -1069,164 +695,6 @@ static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
 	return 0;
 }
 
-int pwc_set_contour(struct pwc_device *pdev, int contour)
-{
-	unsigned char buf;
-	int ret;
-
-	if (contour < 0)
-		buf = 0xff; /* auto contour on */
-	else
-		buf = 0x0; /* auto contour off */
-	ret = send_control_msg(pdev,
-		SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-
-	if (contour < 0)
-		return 0;
-	if (contour > 0xffff)
-		contour = 0xffff;
-
-	buf = (contour >> 10); /* contour preset is [0..3f] */
-	ret = send_control_msg(pdev,
-		SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-int pwc_get_contour(struct pwc_device *pdev, int *contour)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-
-	if (buf == 0) {
-		/* auto mode off, query current preset value */
-		ret = recv_control_msg(pdev,
-			GET_LUM_CTL, PRESET_CONTOUR_FORMATTER,
-			&buf, sizeof(buf));
-		if (ret < 0)
-			return ret;
-		*contour = buf << 10;
-	}
-	else
-		*contour = -1;
-	return 0;
-}
-
-
-int pwc_set_backlight(struct pwc_device *pdev, int backlight)
-{
-	unsigned char buf;
-
-	if (backlight)
-		buf = 0xff;
-	else
-		buf = 0x0;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
-		&buf, sizeof(buf));
-}
-
-int pwc_get_backlight(struct pwc_device *pdev, int *backlight)
-{
-	int ret;
-	unsigned char buf;
-
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
-		&buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*backlight = !!buf;
-	return 0;
-}
-
-int pwc_set_colour_mode(struct pwc_device *pdev, int colour)
-{
-	unsigned char buf;
-
-	if (colour)
-		buf = 0xff;
-	else
-		buf = 0x0;
-	return send_control_msg(pdev,
-		SET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
-}
-
-int pwc_get_colour_mode(struct pwc_device *pdev, int *colour)
-{
-	int ret;
-	unsigned char buf;
-
-	ret = recv_control_msg(pdev,
-		GET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*colour = !!buf;
-	return 0;
-}
-
-
-int pwc_set_flicker(struct pwc_device *pdev, int flicker)
-{
-	unsigned char buf;
-
-	if (flicker)
-		buf = 0xff;
-	else
-		buf = 0x0;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
-}
-
-int pwc_get_flicker(struct pwc_device *pdev, int *flicker)
-{
-	int ret;
-	unsigned char buf;
-
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*flicker = !!buf;
-	return 0;
-}
-
-int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise)
-{
-	unsigned char buf;
-
-	if (noise < 0)
-		noise = 0;
-	if (noise > 3)
-		noise = 3;
-	buf = noise;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
-		&buf, sizeof(buf));
-}
-
-int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise)
-{
-	int ret;
-	unsigned char buf;
-
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
-		&buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*noise = buf;
-	return 0;
-}
-
 static int _pwc_mpt_reset(struct pwc_device *pdev, int flags)
 {
 	unsigned char buf;
@@ -1309,7 +777,7 @@ static int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *st
 	return 0;
 }
 
-
+#ifdef CONFIG_USB_PWC_DEBUG
 int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
 {
 	unsigned char buf;
@@ -1332,7 +800,7 @@ int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
 		*sensor = buf;
 	return 0;
 }
-
+#endif
 
  /* End of Add-Ons                                    */
  /* ************************************************* */
@@ -1356,37 +824,41 @@ int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
 /* copy local variable to arg */
 #define ARG_OUT(ARG_name) /* nothing */
 
+/*
+ * Our ctrls use native values, but the old custom pwc ioctl interface expects
+ * values from 0 - 65535, define 2 helper functions to scale things. */
+static int pwc_ioctl_g_ctrl(struct v4l2_ctrl *ctrl)
+{
+	return v4l2_ctrl_g_ctrl(ctrl) * 65535 / ctrl->maximum;
+}
+
+static int pwc_ioctl_s_ctrl(struct v4l2_ctrl *ctrl, int val)
+{
+	return v4l2_ctrl_s_ctrl(ctrl, val * ctrl->maximum / 65535);
+}
+
 long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 {
 	long ret = 0;
 
 	switch(cmd) {
 	case VIDIOCPWCRUSER:
-	{
-		if (pwc_restore_user(pdev))
-			ret = -EINVAL;
+		ret = pwc_button_ctrl(pdev, RESTORE_USER_DEFAULTS_FORMATTER);
 		break;
-	}
 
 	case VIDIOCPWCSUSER:
-	{
-		if (pwc_save_user(pdev))
-			ret = -EINVAL;
+		ret = pwc_button_ctrl(pdev, SAVE_USER_DEFAULTS_FORMATTER);
 		break;
-	}
 
 	case VIDIOCPWCFACTORY:
-	{
-		if (pwc_restore_factory(pdev))
-			ret = -EINVAL;
+		ret = pwc_button_ctrl(pdev, RESTORE_FACTORY_DEFAULTS_FORMATTER);
 		break;
-	}
 
 	case VIDIOCPWCSCQUAL:
 	{
 		ARG_DEF(int, qual)
 
-		if (pdev->iso_init) {
+		if (vb2_is_streaming(&pdev->vb_queue)) {
 			ret = -EBUSY;
 			break;
 		}
@@ -1396,8 +868,6 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 			ret = -EINVAL;
 		else
 			ret = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot);
-		if (ret >= 0)
-			pdev->vcompression = ARGR(qual);
 		break;
 	}
 
@@ -1432,71 +902,59 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	case VIDIOCPWCSAGC:
 	{
 		ARG_DEF(int, agc)
-
 		ARG_IN(agc)
-		if (pwc_set_agc(pdev, ARGR(agc) < 0 ? 1 : 0, ARGR(agc)))
-			ret = -EINVAL;
+		ret = v4l2_ctrl_s_ctrl(pdev->autogain, ARGR(agc) < 0);
+		if (ret == 0 && ARGR(agc) >= 0)
+			ret = pwc_ioctl_s_ctrl(pdev->gain, ARGR(agc));
 		break;
 	}
 
 	case VIDIOCPWCGAGC:
 	{
 		ARG_DEF(int, agc)
-
-		if (pwc_get_agc(pdev, ARGA(agc)))
-			ret = -EINVAL;
+		if (v4l2_ctrl_g_ctrl(pdev->autogain))
+			ARGR(agc) = -1;
+		else
+			ARGR(agc) = pwc_ioctl_g_ctrl(pdev->gain);
 		ARG_OUT(agc)
 		break;
 	}
 
 	case VIDIOCPWCSSHUTTER:
 	{
-		ARG_DEF(int, shutter_speed)
-
-		ARG_IN(shutter_speed)
-		ret = pwc_set_shutter_speed(pdev, ARGR(shutter_speed) < 0 ? 1 : 0, ARGR(shutter_speed));
+		ARG_DEF(int, shutter)
+		ARG_IN(shutter)
+		ret = v4l2_ctrl_s_ctrl(pdev->exposure_auto,
+				       /* Menu idx 0 = auto, idx 1 = manual */
+				       ARGR(shutter) >= 0);
+		if (ret == 0 && ARGR(shutter) >= 0)
+			ret = pwc_ioctl_s_ctrl(pdev->exposure, ARGR(shutter));
 		break;
 	}
 
 	case VIDIOCPWCSAWB:
 	{
 		ARG_DEF(struct pwc_whitebalance, wb)
-
 		ARG_IN(wb)
-		ret = pwc_set_awb(pdev, ARGR(wb).mode);
-		if (ret >= 0 && ARGR(wb).mode == PWC_WB_MANUAL) {
-			pwc_set_red_gain(pdev, ARGR(wb).manual_red);
-			pwc_set_blue_gain(pdev, ARGR(wb).manual_blue);
-		}
+		ret = v4l2_ctrl_s_ctrl(pdev->auto_white_balance,
+				       ARGR(wb).mode);
+		if (ret == 0 && ARGR(wb).mode == PWC_WB_MANUAL)
+			ret = pwc_ioctl_s_ctrl(pdev->red_balance,
+					       ARGR(wb).manual_red);
+		if (ret == 0 && ARGR(wb).mode == PWC_WB_MANUAL)
+			ret = pwc_ioctl_s_ctrl(pdev->blue_balance,
+					       ARGR(wb).manual_blue);
 		break;
 	}
 
 	case VIDIOCPWCGAWB:
 	{
 		ARG_DEF(struct pwc_whitebalance, wb)
-
-		memset(ARGA(wb), 0, sizeof(struct pwc_whitebalance));
-		ARGR(wb).mode = pwc_get_awb(pdev);
-		if (ARGR(wb).mode < 0)
-			ret = -EINVAL;
-		else {
-			if (ARGR(wb).mode == PWC_WB_MANUAL) {
-				ret = pwc_get_red_gain(pdev, &ARGR(wb).manual_red);
-				if (ret < 0)
-					break;
-				ret = pwc_get_blue_gain(pdev, &ARGR(wb).manual_blue);
-				if (ret < 0)
-					break;
-			}
-			if (ARGR(wb).mode == PWC_WB_AUTO) {
-				ret = pwc_read_red_gain(pdev, &ARGR(wb).read_red);
-				if (ret < 0)
-					break;
-				ret = pwc_read_blue_gain(pdev, &ARGR(wb).read_blue);
-				if (ret < 0)
-					break;
-			}
-		}
+		ARGR(wb).mode = v4l2_ctrl_g_ctrl(pdev->auto_white_balance);
+		ARGR(wb).manual_red = ARGR(wb).read_red =
+			pwc_ioctl_g_ctrl(pdev->red_balance);
+		ARGR(wb).manual_blue = ARGR(wb).read_blue =
+			pwc_ioctl_g_ctrl(pdev->blue_balance);
 		ARG_OUT(wb)
 		break;
 	}
@@ -1550,17 +1008,20 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	case VIDIOCPWCSCONTOUR:
 	{
 		ARG_DEF(int, contour)
-
 		ARG_IN(contour)
-		ret = pwc_set_contour(pdev, ARGR(contour));
+		ret = v4l2_ctrl_s_ctrl(pdev->autocontour, ARGR(contour) < 0);
+		if (ret == 0 && ARGR(contour) >= 0)
+			ret = pwc_ioctl_s_ctrl(pdev->contour, ARGR(contour));
 		break;
 	}
 
 	case VIDIOCPWCGCONTOUR:
 	{
 		ARG_DEF(int, contour)
-
-		ret = pwc_get_contour(pdev, ARGA(contour));
+		if (v4l2_ctrl_g_ctrl(pdev->autocontour))
+			ARGR(contour) = -1;
+		else
+			ARGR(contour) = pwc_ioctl_g_ctrl(pdev->contour);
 		ARG_OUT(contour)
 		break;
 	}
@@ -1568,17 +1029,15 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	case VIDIOCPWCSBACKLIGHT:
 	{
 		ARG_DEF(int, backlight)
-
 		ARG_IN(backlight)
-		ret = pwc_set_backlight(pdev, ARGR(backlight));
+		ret = v4l2_ctrl_s_ctrl(pdev->backlight, ARGR(backlight));
 		break;
 	}
 
 	case VIDIOCPWCGBACKLIGHT:
 	{
 		ARG_DEF(int, backlight)
-
-		ret = pwc_get_backlight(pdev, ARGA(backlight));
+		ARGR(backlight) = v4l2_ctrl_g_ctrl(pdev->backlight);
 		ARG_OUT(backlight)
 		break;
 	}
@@ -1586,17 +1045,15 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	case VIDIOCPWCSFLICKER:
 	{
 		ARG_DEF(int, flicker)
-
 		ARG_IN(flicker)
-		ret = pwc_set_flicker(pdev, ARGR(flicker));
+		ret = v4l2_ctrl_s_ctrl(pdev->flicker, ARGR(flicker));
 		break;
 	}
 
 	case VIDIOCPWCGFLICKER:
 	{
 		ARG_DEF(int, flicker)
-
-		ret = pwc_get_flicker(pdev, ARGA(flicker));
+		ARGR(flicker) = v4l2_ctrl_g_ctrl(pdev->flicker);
 		ARG_OUT(flicker)
 		break;
 	}
@@ -1604,17 +1061,15 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	case VIDIOCPWCSDYNNOISE:
 	{
 		ARG_DEF(int, dynnoise)
-
 		ARG_IN(dynnoise)
-		ret = pwc_set_dynamic_noise(pdev, ARGR(dynnoise));
+		ret = v4l2_ctrl_s_ctrl(pdev->noise_reduction, ARGR(dynnoise));
 		break;
 	}
 
 	case VIDIOCPWCGDYNNOISE:
 	{
 		ARG_DEF(int, dynnoise)
-
-		ret = pwc_get_dynamic_noise(pdev, ARGA(dynnoise));
+		ARGR(dynnoise) = v4l2_ctrl_g_ctrl(pdev->noise_reduction);
 		ARG_OUT(dynnoise);
 		break;
 	}
diff --git a/drivers/media/video/pwc/pwc-dec1.c b/drivers/media/video/pwc/pwc-dec1.c
index c29593f..be0e02c 100644
--- a/drivers/media/video/pwc/pwc-dec1.c
+++ b/drivers/media/video/pwc/pwc-dec1.c
@@ -22,29 +22,19 @@
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
-
-
-
 #include "pwc-dec1.h"
 
-
-void pwc_dec1_init(int type, int release, void *buffer, void *table)
+int pwc_dec1_init(struct pwc_device *pwc, int type, int release, void *buffer)
 {
+	struct pwc_dec1_private *pdec;
 
-}
-
-void pwc_dec1_exit(void)
-{
+	if (pwc->decompress_data == NULL) {
+		pdec = kmalloc(sizeof(struct pwc_dec1_private), GFP_KERNEL);
+		if (pdec == NULL)
+			return -ENOMEM;
+		pwc->decompress_data = pdec;
+	}
+	pdec = pwc->decompress_data;
 
-
-
-}
-
-int pwc_dec1_alloc(struct pwc_device *pwc)
-{
-	pwc->decompress_data = kmalloc(sizeof(struct pwc_dec1_private), GFP_KERNEL);
-	if (pwc->decompress_data == NULL)
-		return -ENOMEM;
 	return 0;
 }
-
diff --git a/drivers/media/video/pwc/pwc-dec1.h b/drivers/media/video/pwc/pwc-dec1.h
index 8b62ddc..a57d860 100644
--- a/drivers/media/video/pwc/pwc-dec1.h
+++ b/drivers/media/video/pwc/pwc-dec1.h
@@ -22,8 +22,6 @@
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-
-
 #ifndef PWC_DEC1_H
 #define PWC_DEC1_H
 
@@ -32,12 +30,8 @@
 struct pwc_dec1_private
 {
 	int version;
-
 };
 
-int  pwc_dec1_alloc(struct pwc_device *pwc);
-void pwc_dec1_init(int type, int release, void *buffer, void *private_data);
-void pwc_dec1_exit(void);
+int pwc_dec1_init(struct pwc_device *pwc, int type, int release, void *buffer);
 
 #endif
-
diff --git a/drivers/media/video/pwc/pwc-dec23.c b/drivers/media/video/pwc/pwc-dec23.c
index 0c801b8..06a4e87 100644
--- a/drivers/media/video/pwc/pwc-dec23.c
+++ b/drivers/media/video/pwc/pwc-dec23.c
@@ -916,27 +916,5 @@ void pwc_dec23_decompress(const struct pwc_device *pwc,
 			pout_planar_v += pwc->view.x;
 
 		}
-
 	}
-
 }
-
-void pwc_dec23_exit(void)
-{
-	/* Do nothing */
-
-}
-
-/**
- * Allocate a private structure used by lookup table.
- * You must call kfree() to free the memory allocated.
- */
-int pwc_dec23_alloc(struct pwc_device *pwc)
-{
-	pwc->decompress_data = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL);
-	if (pwc->decompress_data == NULL)
-		return -ENOMEM;
-	return 0;
-}
-
-/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */
diff --git a/drivers/media/video/pwc/pwc-dec23.h b/drivers/media/video/pwc/pwc-dec23.h
index 1c55298..a0ac4f3 100644
--- a/drivers/media/video/pwc/pwc-dec23.h
+++ b/drivers/media/video/pwc/pwc-dec23.h
@@ -49,19 +49,9 @@ struct pwc_dec23_private
 
 };
 
-
-int pwc_dec23_alloc(struct pwc_device *pwc);
 int pwc_dec23_init(struct pwc_device *pwc, int type, unsigned char *cmd);
-void pwc_dec23_exit(void);
 void pwc_dec23_decompress(const struct pwc_device *pwc,
 			  const void *src,
 			  void *dst,
 			  int flags);
-
-
-
 #endif
-
-
-/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */
-
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index b0bde5a..51ca358 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -2,6 +2,7 @@
    USB and Video4Linux interface part.
    (C) 1999-2004 Nemosoft Unv.
    (C) 2004-2006 Luc Saillard (luc@saillard.org)
+   (C) 2011 Hans de Goede <hdegoede@redhat.com>
 
    NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
    driver and thus may have bugs that are not present in the original version.
@@ -74,7 +75,6 @@
 #include "pwc-timon.h"
 #include "pwc-dec23.h"
 #include "pwc-dec1.h"
-#include "pwc-uncompress.h"
 
 /* Function prototypes and driver templates */
 
@@ -116,6 +116,7 @@ MODULE_DEVICE_TABLE(usb, pwc_device_table);
 
 static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id);
 static void usb_pwc_disconnect(struct usb_interface *intf);
+static void pwc_isoc_cleanup(struct pwc_device *pdev);
 
 static struct usb_driver pwc_driver = {
 	.name =			"Philips webcam",	/* name */
@@ -127,14 +128,11 @@ static struct usb_driver pwc_driver = {
 #define MAX_DEV_HINTS	20
 #define MAX_ISOC_ERRORS	20
 
-static int default_size = PSZ_QCIF;
 static int default_fps = 10;
-static int default_fbufs = 3;   /* Default number of frame buffers */
-	int pwc_mbufs = 2;	/* Default number of mmap() buffers */
 #ifdef CONFIG_USB_PWC_DEBUG
 	int pwc_trace = PWC_DEBUG_LEVEL;
 #endif
-static int power_save;
+static int power_save = -1;
 static int led_on = 100, led_off; /* defaults to LED that is on while in use */
 static int pwc_preferred_compression = 1; /* 0..3 = uncompressed..high */
 static struct {
@@ -173,389 +171,20 @@ static struct video_device pwc_template = {
 /***************************************************************************/
 /* Private functions */
 
-/* Here we want the physical address of the memory.
- * This is used when initializing the contents of the area.
- */
-
-
-
-static void *pwc_rvmalloc(unsigned long size)
-{
-	void * mem;
-	unsigned long adr;
-
-	mem=vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr=(unsigned long) mem;
-	while (size > 0)
-	 {
-	   SetPageReserved(vmalloc_to_page((void *)adr));
-	   adr  += PAGE_SIZE;
-	   size -= PAGE_SIZE;
-	 }
-	return mem;
-}
-
-static void pwc_rvfree(void * mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr=(unsigned long) mem;
-	while ((long) size > 0)
-	 {
-	   ClearPageReserved(vmalloc_to_page((void *)adr));
-	   adr  += PAGE_SIZE;
-	   size -= PAGE_SIZE;
-	 }
-	vfree(mem);
-}
-
-
-
-
-static int pwc_allocate_buffers(struct pwc_device *pdev)
-{
-	int i, err;
-	void *kbuf;
-
-	PWC_DEBUG_MEMORY(">> pwc_allocate_buffers(pdev = 0x%p)\n", pdev);
-
-	if (pdev == NULL)
-		return -ENXIO;
-
-	/* Allocate Isochronuous pipe buffers */
-	for (i = 0; i < MAX_ISO_BUFS; i++) {
-		if (pdev->sbuf[i].data == NULL) {
-			kbuf = kzalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
-			if (kbuf == NULL) {
-				PWC_ERROR("Failed to allocate iso buffer %d.\n", i);
-				return -ENOMEM;
-			}
-			PWC_DEBUG_MEMORY("Allocated iso buffer at %p.\n", kbuf);
-			pdev->sbuf[i].data = kbuf;
-		}
-	}
-
-	/* Allocate frame buffer structure */
-	if (pdev->fbuf == NULL) {
-		kbuf = kzalloc(default_fbufs * sizeof(struct pwc_frame_buf), GFP_KERNEL);
-		if (kbuf == NULL) {
-			PWC_ERROR("Failed to allocate frame buffer structure.\n");
-			return -ENOMEM;
-		}
-		PWC_DEBUG_MEMORY("Allocated frame buffer structure at %p.\n", kbuf);
-		pdev->fbuf = kbuf;
-	}
-
-	/* create frame buffers, and make circular ring */
-	for (i = 0; i < default_fbufs; i++) {
-		if (pdev->fbuf[i].data == NULL) {
-			kbuf = vzalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */
-			if (kbuf == NULL) {
-				PWC_ERROR("Failed to allocate frame buffer %d.\n", i);
-				return -ENOMEM;
-			}
-			PWC_DEBUG_MEMORY("Allocated frame buffer %d at %p.\n", i, kbuf);
-			pdev->fbuf[i].data = kbuf;
-		}
-	}
-
-	/* Allocate decompressor table space */
-	if (DEVICE_USE_CODEC1(pdev->type))
-		err = pwc_dec1_alloc(pdev);
-	else
-		err = pwc_dec23_alloc(pdev);
-
-	if (err) {
-		PWC_ERROR("Failed to allocate decompress table.\n");
-		return err;
-	}
-
-	/* Allocate image buffer; double buffer for mmap() */
-	kbuf = pwc_rvmalloc(pwc_mbufs * pdev->len_per_image);
-	if (kbuf == NULL) {
-		PWC_ERROR("Failed to allocate image buffer(s). needed (%d)\n",
-				pwc_mbufs * pdev->len_per_image);
-		return -ENOMEM;
-	}
-	PWC_DEBUG_MEMORY("Allocated image buffer at %p.\n", kbuf);
-	pdev->image_data = kbuf;
-	for (i = 0; i < pwc_mbufs; i++) {
-		pdev->images[i].offset = i * pdev->len_per_image;
-		pdev->images[i].vma_use_count = 0;
-	}
-	for (; i < MAX_IMAGES; i++) {
-		pdev->images[i].offset = 0;
-	}
-
-	kbuf = NULL;
-
-	PWC_DEBUG_MEMORY("<< pwc_allocate_buffers()\n");
-	return 0;
-}
-
-static void pwc_free_buffers(struct pwc_device *pdev)
-{
-	int i;
-
-	PWC_DEBUG_MEMORY("Entering free_buffers(%p).\n", pdev);
-
-	if (pdev == NULL)
-		return;
-	/* Release Iso-pipe buffers */
-	for (i = 0; i < MAX_ISO_BUFS; i++)
-		if (pdev->sbuf[i].data != NULL) {
-			PWC_DEBUG_MEMORY("Freeing ISO buffer at %p.\n", pdev->sbuf[i].data);
-			kfree(pdev->sbuf[i].data);
-			pdev->sbuf[i].data = NULL;
-		}
-
-	/* The same for frame buffers */
-	if (pdev->fbuf != NULL) {
-		for (i = 0; i < default_fbufs; i++) {
-			if (pdev->fbuf[i].data != NULL) {
-				PWC_DEBUG_MEMORY("Freeing frame buffer %d at %p.\n", i, pdev->fbuf[i].data);
-				vfree(pdev->fbuf[i].data);
-				pdev->fbuf[i].data = NULL;
-			}
-		}
-		kfree(pdev->fbuf);
-		pdev->fbuf = NULL;
-	}
-
-	/* Intermediate decompression buffer & tables */
-	if (pdev->decompress_data != NULL) {
-		PWC_DEBUG_MEMORY("Freeing decompression buffer at %p.\n", pdev->decompress_data);
-		kfree(pdev->decompress_data);
-		pdev->decompress_data = NULL;
-	}
-
-	/* Release image buffers */
-	if (pdev->image_data != NULL) {
-		PWC_DEBUG_MEMORY("Freeing image buffer at %p.\n", pdev->image_data);
-		pwc_rvfree(pdev->image_data, pwc_mbufs * pdev->len_per_image);
-	}
-	pdev->image_data = NULL;
-
-	PWC_DEBUG_MEMORY("Leaving free_buffers().\n");
-}
-
-/* The frame & image buffer mess.
-
-   Yes, this is a mess. Well, it used to be simple, but alas...  In this
-   module, 3 buffers schemes are used to get the data from the USB bus to
-   the user program. The first scheme involves the ISO buffers (called thus
-   since they transport ISO data from the USB controller), and not really
-   interesting. Suffices to say the data from this buffer is quickly
-   gathered in an interrupt handler (pwc_isoc_handler) and placed into the
-   frame buffer.
-
-   The frame buffer is the second scheme, and is the central element here.
-   It collects the data from a single frame from the camera (hence, the
-   name). Frames are delimited by the USB camera with a short USB packet,
-   so that's easy to detect. The frame buffers form a list that is filled
-   by the camera+USB controller and drained by the user process through
-   either read() or mmap().
-
-   The image buffer is the third scheme, in which frames are decompressed
-   and converted into planar format. For mmap() there is more than
-   one image buffer available.
-
-   The frame buffers provide the image buffering. In case the user process
-   is a bit slow, this introduces lag and some undesired side-effects.
-   The problem arises when the frame buffer is full. I used to drop the last
-   frame, which makes the data in the queue stale very quickly. But dropping
-   the frame at the head of the queue proved to be a litte bit more difficult.
-   I tried a circular linked scheme, but this introduced more problems than
-   it solved.
-
-   Because filling and draining are completely asynchronous processes, this
-   requires some fiddling with pointers and mutexes.
-
-   Eventually, I came up with a system with 2 lists: an 'empty' frame list
-   and a 'full' frame list:
-     * Initially, all frame buffers but one are on the 'empty' list; the one
-       remaining buffer is our initial fill frame.
-     * If a frame is needed for filling, we try to take it from the 'empty'
-       list, unless that list is empty, in which case we take the buffer at
-       the head of the 'full' list.
-     * When our fill buffer has been filled, it is appended to the 'full'
-       list.
-     * If a frame is needed by read() or mmap(), it is taken from the head of
-       the 'full' list, handled, and then appended to the 'empty' list. If no
-       buffer is present on the 'full' list, we wait.
-   The advantage is that the buffer that is currently being decompressed/
-   converted, is on neither list, and thus not in our way (any other scheme
-   I tried had the problem of old data lingering in the queue).
-
-   Whatever strategy you choose, it always remains a tradeoff: with more
-   frame buffers the chances of a missed frame are reduced. On the other
-   hand, on slower machines it introduces lag because the queue will
-   always be full.
- */
-
-/**
-  \brief Find next frame buffer to fill. Take from empty or full list, whichever comes first.
- */
-static int pwc_next_fill_frame(struct pwc_device *pdev)
-{
-	int ret;
-	unsigned long flags;
-
-	ret = 0;
-	spin_lock_irqsave(&pdev->ptrlock, flags);
-	if (pdev->fill_frame != NULL) {
-		/* append to 'full' list */
-		if (pdev->full_frames == NULL) {
-			pdev->full_frames = pdev->fill_frame;
-			pdev->full_frames_tail = pdev->full_frames;
-		}
-		else {
-			pdev->full_frames_tail->next = pdev->fill_frame;
-			pdev->full_frames_tail = pdev->fill_frame;
-		}
-	}
-	if (pdev->empty_frames != NULL) {
-		/* We have empty frames available. That's easy */
-		pdev->fill_frame = pdev->empty_frames;
-		pdev->empty_frames = pdev->empty_frames->next;
-	}
-	else {
-		/* Hmm. Take it from the full list */
-		/* sanity check */
-		if (pdev->full_frames == NULL) {
-			PWC_ERROR("Neither empty or full frames available!\n");
-			spin_unlock_irqrestore(&pdev->ptrlock, flags);
-			return -EINVAL;
-		}
-		pdev->fill_frame = pdev->full_frames;
-		pdev->full_frames = pdev->full_frames->next;
-		ret = 1;
-	}
-	pdev->fill_frame->next = NULL;
-	spin_unlock_irqrestore(&pdev->ptrlock, flags);
-	return ret;
-}
-
-
-/**
-  \brief Reset all buffers, pointers and lists, except for the image_used[] buffer.
-
-  If the image_used[] buffer is cleared too, mmap()/VIDIOCSYNC will run into trouble.
- */
-static void pwc_reset_buffers(struct pwc_device *pdev)
-{
-	int i;
-	unsigned long flags;
-
-	PWC_DEBUG_MEMORY(">> %s __enter__\n", __func__);
-
-	spin_lock_irqsave(&pdev->ptrlock, flags);
-	pdev->full_frames = NULL;
-	pdev->full_frames_tail = NULL;
-	for (i = 0; i < default_fbufs; i++) {
-		pdev->fbuf[i].filled = 0;
-		if (i > 0)
-			pdev->fbuf[i].next = &pdev->fbuf[i - 1];
-		else
-			pdev->fbuf->next = NULL;
-	}
-	pdev->empty_frames = &pdev->fbuf[default_fbufs - 1];
-	pdev->empty_frames_tail = pdev->fbuf;
-	pdev->read_frame = NULL;
-	pdev->fill_frame = pdev->empty_frames;
-	pdev->empty_frames = pdev->empty_frames->next;
-
-	pdev->image_read_pos = 0;
-	pdev->fill_image = 0;
-	spin_unlock_irqrestore(&pdev->ptrlock, flags);
-
-	PWC_DEBUG_MEMORY("<< %s __leaving__\n", __func__);
-}
-
-
-/**
-  \brief Do all the handling for getting one frame: get pointer, decompress, advance pointers.
- */
-int pwc_handle_frame(struct pwc_device *pdev)
+struct pwc_frame_buf *pwc_get_next_fill_buf(struct pwc_device *pdev)
 {
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&pdev->ptrlock, flags);
-	/* First grab our read_frame; this is removed from all lists, so
-	   we can release the lock after this without problems */
-	if (pdev->read_frame != NULL) {
-		/* This can't theoretically happen */
-		PWC_ERROR("Huh? Read frame still in use?\n");
-		spin_unlock_irqrestore(&pdev->ptrlock, flags);
-		return ret;
-	}
-
-
-	if (pdev->full_frames == NULL) {
-		PWC_ERROR("Woops. No frames ready.\n");
-	}
-	else {
-		pdev->read_frame = pdev->full_frames;
-		pdev->full_frames = pdev->full_frames->next;
-		pdev->read_frame->next = NULL;
-	}
-
-	if (pdev->read_frame != NULL) {
-		/* Decompression is a lengthy process, so it's outside of the lock.
-		   This gives the isoc_handler the opportunity to fill more frames
-		   in the mean time.
-		*/
-		spin_unlock_irqrestore(&pdev->ptrlock, flags);
-		ret = pwc_decompress(pdev);
-		spin_lock_irqsave(&pdev->ptrlock, flags);
-
-		/* We're done with read_buffer, tack it to the end of the empty buffer list */
-		if (pdev->empty_frames == NULL) {
-			pdev->empty_frames = pdev->read_frame;
-			pdev->empty_frames_tail = pdev->empty_frames;
-		}
-		else {
-			pdev->empty_frames_tail->next = pdev->read_frame;
-			pdev->empty_frames_tail = pdev->read_frame;
-		}
-		pdev->read_frame = NULL;
-	}
-	spin_unlock_irqrestore(&pdev->ptrlock, flags);
-	return ret;
-}
-
-/**
-  \brief Advance pointers of image buffer (after each user request)
-*/
-void pwc_next_image(struct pwc_device *pdev)
-{
-	pdev->image_used[pdev->fill_image] = 0;
-	pdev->fill_image = (pdev->fill_image + 1) % pwc_mbufs;
-}
-
-/**
- * Print debug information when a frame is discarded because all of our buffer
- * is full
- */
-static void pwc_frame_dumped(struct pwc_device *pdev)
-{
-	pdev->vframes_dumped++;
-	if (pdev->vframe_count < FRAME_LOWMARK)
-		return;
-
-	if (pdev->vframes_dumped < 20)
-		PWC_DEBUG_FLOW("Dumping frame %d\n", pdev->vframe_count);
-	else if (pdev->vframes_dumped == 20)
-		PWC_DEBUG_FLOW("Dumping frame %d (last message)\n",
-				pdev->vframe_count);
+	unsigned long flags = 0;
+	struct pwc_frame_buf *buf = NULL;
+
+	spin_lock_irqsave(&pdev->queued_bufs_lock, flags);
+	if (list_empty(&pdev->queued_bufs))
+		goto leave;
+
+	buf = list_entry(pdev->queued_bufs.next, struct pwc_frame_buf, list);
+	list_del(&buf->list);
+leave:
+	spin_unlock_irqrestore(&pdev->queued_bufs_lock, flags);
+	return buf;
 }
 
 static void pwc_snapshot_button(struct pwc_device *pdev, int down)
@@ -575,9 +204,9 @@ static void pwc_snapshot_button(struct pwc_device *pdev, int down)
 #endif
 }
 
-static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_buf *fbuf)
+static void pwc_frame_complete(struct pwc_device *pdev)
 {
-	int awake = 0;
+	struct pwc_frame_buf *fbuf = pdev->fill_buf;
 
 	/* The ToUCam Fun CMOS sensor causes the firmware to send 2 or 3 bogus
 	   frames on the USB wire after an exposure change. This conditition is
@@ -589,7 +218,6 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_
 		if (ptr[1] == 1 && ptr[0] & 0x10) {
 			PWC_TRACE("Hyundai CMOS sensor bug. Dropping frame.\n");
 			pdev->drop_frames += 2;
-			pdev->vframes_error++;
 		}
 		if ((ptr[0] ^ pdev->vmirror) & 0x01) {
 			pwc_snapshot_button(pdev, ptr[0] & 0x01);
@@ -612,8 +240,7 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_
 		   */
 		if (fbuf->filled == 4)
 			pdev->drop_frames++;
-	}
-	else if (pdev->type == 740 || pdev->type == 720) {
+	} else if (pdev->type == 740 || pdev->type == 720) {
 		unsigned char *ptr = (unsigned char *)fbuf->data;
 		if ((ptr[0] ^ pdev->vmirror) & 0x01) {
 			pwc_snapshot_button(pdev, ptr[0] & 0x01);
@@ -621,33 +248,23 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_
 		pdev->vmirror = ptr[0] & 0x03;
 	}
 
-	/* In case we were instructed to drop the frame, do so silently.
-	   The buffer pointers are not updated either (but the counters are reset below).
-	   */
-	if (pdev->drop_frames > 0)
+	/* In case we were instructed to drop the frame, do so silently. */
+	if (pdev->drop_frames > 0) {
 		pdev->drop_frames--;
-	else {
+	} else {
 		/* Check for underflow first */
 		if (fbuf->filled < pdev->frame_total_size) {
 			PWC_DEBUG_FLOW("Frame buffer underflow (%d bytes);"
 				       " discarded.\n", fbuf->filled);
-			pdev->vframes_error++;
-		}
-		else {
-			/* Send only once per EOF */
-			awake = 1; /* delay wake_ups */
-
-			/* Find our next frame to fill. This will always succeed, since we
-			 * nick a frame from either empty or full list, but if we had to
-			 * take it from the full list, it means a frame got dropped.
-			 */
-			if (pwc_next_fill_frame(pdev))
-				pwc_frame_dumped(pdev);
-
+		} else {
+			fbuf->vb.v4l2_buf.field = V4L2_FIELD_NONE;
+			fbuf->vb.v4l2_buf.sequence = pdev->vframe_count;
+			vb2_buffer_done(&fbuf->vb, VB2_BUF_STATE_DONE);
+			pdev->fill_buf = NULL;
+			pdev->vsync = 0;
 		}
 	} /* !drop_frames */
 	pdev->vframe_count++;
-	return awake;
 }
 
 /* This gets called for the Isochronous pipe (video). This is done in
@@ -655,24 +272,20 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_
  */
 static void pwc_isoc_handler(struct urb *urb)
 {
-	struct pwc_device *pdev;
+	struct pwc_device *pdev = (struct pwc_device *)urb->context;
 	int i, fst, flen;
-	int awake;
-	struct pwc_frame_buf *fbuf;
-	unsigned char *fillptr = NULL, *iso_buf = NULL;
+	unsigned char *iso_buf = NULL;
 
-	awake = 0;
-	pdev = (struct pwc_device *)urb->context;
-	if (pdev == NULL) {
-		PWC_ERROR("isoc_handler() called with NULL device?!\n");
-		return;
-	}
-
-	if (urb->status == -ENOENT || urb->status == -ECONNRESET) {
+	if (urb->status == -ENOENT || urb->status == -ECONNRESET ||
+	    urb->status == -ESHUTDOWN) {
 		PWC_DEBUG_OPEN("URB (%p) unlinked %ssynchronuously.\n", urb, urb->status == -ENOENT ? "" : "a");
 		return;
 	}
-	if (urb->status != -EINPROGRESS && urb->status != 0) {
+
+	if (pdev->fill_buf == NULL)
+		pdev->fill_buf = pwc_get_next_fill_buf(pdev);
+
+	if (urb->status != 0) {
 		const char *errmsg;
 
 		errmsg = "Unknown";
@@ -684,29 +297,21 @@ static void pwc_isoc_handler(struct urb *urb)
 			case -EILSEQ:		errmsg = "CRC/Timeout (could be anything)"; break;
 			case -ETIME:		errmsg = "Device does not respond"; break;
 		}
-		PWC_DEBUG_FLOW("pwc_isoc_handler() called with status %d [%s].\n", urb->status, errmsg);
-		/* Give up after a number of contiguous errors on the USB bus.
-		   Appearantly something is wrong so we simulate an unplug event.
-		 */
+		PWC_ERROR("pwc_isoc_handler() called with status %d [%s].\n",
+			  urb->status, errmsg);
+		/* Give up after a number of contiguous errors */
 		if (++pdev->visoc_errors > MAX_ISOC_ERRORS)
 		{
-			PWC_INFO("Too many ISOC errors, bailing out.\n");
-			pdev->error_status = EIO;
-			awake = 1;
-			wake_up_interruptible(&pdev->frameq);
+			PWC_ERROR("Too many ISOC errors, bailing out.\n");
+			if (pdev->fill_buf) {
+				vb2_buffer_done(&pdev->fill_buf->vb,
+						VB2_BUF_STATE_ERROR);
+				pdev->fill_buf = NULL;
+			}
 		}
-		goto handler_end; // ugly, but practical
-	}
-
-	fbuf = pdev->fill_frame;
-	if (fbuf == NULL) {
-		PWC_ERROR("pwc_isoc_handler without valid fill frame.\n");
-		awake = 1;
+		pdev->vsync = 0; /* Drop the current frame */
 		goto handler_end;
 	}
-	else {
-		fillptr = fbuf->data + fbuf->filled;
-	}
 
 	/* Reset ISOC error counter. We did get here, after all. */
 	pdev->visoc_errors = 0;
@@ -720,89 +325,73 @@ static void pwc_isoc_handler(struct urb *urb)
 		fst  = urb->iso_frame_desc[i].status;
 		flen = urb->iso_frame_desc[i].actual_length;
 		iso_buf = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
-		if (fst == 0) {
-			if (flen > 0) { /* if valid data... */
-				if (pdev->vsync > 0) { /* ...and we are not sync-hunting... */
-					pdev->vsync = 2;
-
-					/* ...copy data to frame buffer, if possible */
-					if (flen + fbuf->filled > pdev->frame_total_size) {
-						PWC_DEBUG_FLOW("Frame buffer overflow (flen = %d, frame_total_size = %d).\n", flen, pdev->frame_total_size);
-						pdev->vsync = 0; /* Hmm, let's wait for an EOF (end-of-frame) */
-						pdev->vframes_error++;
-					}
-					else {
-						memmove(fillptr, iso_buf, flen);
-						fillptr += flen;
-					}
-				}
+		if (fst != 0) {
+			PWC_ERROR("Iso frame %d has error %d\n", i, fst);
+			continue;
+		}
+		if (flen > 0 && pdev->vsync) {
+			struct pwc_frame_buf *fbuf = pdev->fill_buf;
+
+			if (pdev->vsync == 1) {
+				do_gettimeofday(&fbuf->vb.v4l2_buf.timestamp);
+				pdev->vsync = 2;
+			}
+
+			if (flen + fbuf->filled > pdev->frame_total_size) {
+				PWC_ERROR("Frame overflow (%d > %d)\n",
+					  flen + fbuf->filled,
+					  pdev->frame_total_size);
+				pdev->vsync = 0; /* Let's wait for an EOF */
+			} else {
+				memcpy(fbuf->data + fbuf->filled, iso_buf,
+				       flen);
 				fbuf->filled += flen;
-			} /* ..flen > 0 */
-
-			if (flen < pdev->vlast_packet_size) {
-				/* Shorter packet... We probably have the end of an image-frame;
-				   wake up read() process and let select()/poll() do something.
-				   Decompression is done in user time over there.
-				   */
-				if (pdev->vsync == 2) {
-					if (pwc_rcv_short_packet(pdev, fbuf)) {
-						awake = 1;
-						fbuf = pdev->fill_frame;
-					}
-				}
-				fbuf->filled = 0;
-				fillptr = fbuf->data;
+			}
+		}
+		if (flen < pdev->vlast_packet_size) {
+			/* Shorter packet... end of frame */
+			if (pdev->vsync == 2)
+				pwc_frame_complete(pdev);
+			if (pdev->fill_buf == NULL)
+				pdev->fill_buf = pwc_get_next_fill_buf(pdev);
+			if (pdev->fill_buf) {
+				pdev->fill_buf->filled = 0;
 				pdev->vsync = 1;
 			}
-
-			pdev->vlast_packet_size = flen;
-		} /* ..status == 0 */
-		else {
-			/* This is normally not interesting to the user, unless
-			 * you are really debugging something, default = 0 */
-			static int iso_error;
-			iso_error++;
-			if (iso_error < 20)
-				PWC_DEBUG_FLOW("Iso frame %d of USB has error %d\n", i, fst);
 		}
+		pdev->vlast_packet_size = flen;
 	}
 
 handler_end:
-	if (awake)
-		wake_up_interruptible(&pdev->frameq);
-
-	urb->dev = pdev->udev;
 	i = usb_submit_urb(urb, GFP_ATOMIC);
 	if (i != 0)
 		PWC_ERROR("Error (%d) re-submitting urb in pwc_isoc_handler.\n", i);
 }
 
-
-int pwc_isoc_init(struct pwc_device *pdev)
+static int pwc_isoc_init(struct pwc_device *pdev)
 {
 	struct usb_device *udev;
 	struct urb *urb;
 	int i, j, ret;
-
 	struct usb_interface *intf;
 	struct usb_host_interface *idesc = NULL;
 
-	if (pdev == NULL)
-		return -EFAULT;
 	if (pdev->iso_init)
 		return 0;
+
 	pdev->vsync = 0;
+	pdev->vlast_packet_size = 0;
+	pdev->fill_buf = NULL;
+	pdev->vframe_count = 0;
+	pdev->visoc_errors = 0;
 	udev = pdev->udev;
 
 	/* Get the current alternate interface, adjust packet size */
-	if (!udev->actconfig)
-		return -EFAULT;
 	intf = usb_ifnum_to_if(udev, 0);
 	if (intf)
 		idesc = usb_altnum_to_altsetting(intf, pdev->valternate);
-
 	if (!idesc)
-		return -EFAULT;
+		return -EIO;
 
 	/* Search video endpoint */
 	pdev->vmax_packet_size = -1;
@@ -825,34 +414,32 @@ int pwc_isoc_init(struct pwc_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	/* Allocate and init Isochronuous urbs */
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
 		urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
 		if (urb == NULL) {
 			PWC_ERROR("Failed to allocate urb %d\n", i);
-			ret = -ENOMEM;
-			break;
+			pdev->iso_init = 1;
+			pwc_isoc_cleanup(pdev);
+			return -ENOMEM;
 		}
-		pdev->sbuf[i].urb = urb;
+		pdev->urbs[i] = urb;
 		PWC_DEBUG_MEMORY("Allocated URB at 0x%p\n", urb);
-	}
-	if (ret) {
-		/* De-allocate in reverse order */
-		while (i--) {
-			usb_free_urb(pdev->sbuf[i].urb);
-			pdev->sbuf[i].urb = NULL;
-		}
-		return ret;
-	}
-
-	/* init URB structure */
-	for (i = 0; i < MAX_ISO_BUFS; i++) {
-		urb = pdev->sbuf[i].urb;
 
 		urb->interval = 1; // devik
 		urb->dev = udev;
 		urb->pipe = usb_rcvisocpipe(udev, pdev->vendpoint);
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->transfer_buffer = pdev->sbuf[i].data;
+		urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+		urb->transfer_buffer = usb_alloc_coherent(udev,
+							  ISO_BUFFER_SIZE,
+							  GFP_KERNEL,
+							  &urb->transfer_dma);
+		if (urb->transfer_buffer == NULL) {
+			PWC_ERROR("Failed to allocate urb buffer %d\n", i);
+			pdev->iso_init = 1;
+			pwc_isoc_cleanup(pdev);
+			return -ENOMEM;
+		}
 		urb->transfer_buffer_length = ISO_BUFFER_SIZE;
 		urb->complete = pwc_isoc_handler;
 		urb->context = pdev;
@@ -866,14 +453,14 @@ int pwc_isoc_init(struct pwc_device *pdev)
 
 	/* link */
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
-		ret = usb_submit_urb(pdev->sbuf[i].urb, GFP_KERNEL);
+		ret = usb_submit_urb(pdev->urbs[i], GFP_KERNEL);
 		if (ret) {
 			PWC_ERROR("isoc_init() submit_urb %d failed with error %d\n", i, ret);
 			pdev->iso_init = 1;
 			pwc_isoc_cleanup(pdev);
 			return ret;
 		}
-		PWC_DEBUG_MEMORY("URB 0x%p submitted.\n", pdev->sbuf[i].urb);
+		PWC_DEBUG_MEMORY("URB 0x%p submitted.\n", pdev->urbs[i]);
 	}
 
 	/* All is done... */
@@ -888,12 +475,9 @@ static void pwc_iso_stop(struct pwc_device *pdev)
 
 	/* Unlinking ISOC buffers one by one */
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
-		struct urb *urb;
-
-		urb = pdev->sbuf[i].urb;
-		if (urb) {
-			PWC_DEBUG_MEMORY("Unlinking URB %p\n", urb);
-			usb_kill_urb(urb);
+		if (pdev->urbs[i]) {
+			PWC_DEBUG_MEMORY("Unlinking URB %p\n", pdev->urbs[i]);
+			usb_kill_urb(pdev->urbs[i]);
 		}
 	}
 }
@@ -904,40 +488,51 @@ static void pwc_iso_free(struct pwc_device *pdev)
 
 	/* Freeing ISOC buffers one by one */
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
-		struct urb *urb;
-
-		urb = pdev->sbuf[i].urb;
-		if (urb) {
+		if (pdev->urbs[i]) {
 			PWC_DEBUG_MEMORY("Freeing URB\n");
-			usb_free_urb(urb);
-			pdev->sbuf[i].urb = NULL;
+			if (pdev->urbs[i]->transfer_buffer) {
+				usb_free_coherent(pdev->udev,
+					pdev->urbs[i]->transfer_buffer_length,
+					pdev->urbs[i]->transfer_buffer,
+					pdev->urbs[i]->transfer_dma);
+			}
+			usb_free_urb(pdev->urbs[i]);
+			pdev->urbs[i] = NULL;
 		}
 	}
 }
 
-void pwc_isoc_cleanup(struct pwc_device *pdev)
+static void pwc_isoc_cleanup(struct pwc_device *pdev)
 {
 	PWC_DEBUG_OPEN(">> pwc_isoc_cleanup()\n");
-	if (pdev == NULL)
-		return;
+
 	if (pdev->iso_init == 0)
 		return;
 
 	pwc_iso_stop(pdev);
 	pwc_iso_free(pdev);
-
-	/* Stop camera, but only if we are sure the camera is still there (unplug
-	   is signalled by EPIPE)
-	 */
-	if (pdev->error_status != EPIPE) {
-		PWC_DEBUG_OPEN("Setting alternate interface 0.\n");
-		usb_set_interface(pdev->udev, 0, 0);
-	}
+	usb_set_interface(pdev->udev, 0, 0);
 
 	pdev->iso_init = 0;
 	PWC_DEBUG_OPEN("<< pwc_isoc_cleanup()\n");
 }
 
+/*
+ * Release all queued buffers, no need to take queued_bufs_lock, since all
+ * iso urbs have been killed when we're called so pwc_isoc_handler won't run.
+ */
+static void pwc_cleanup_queued_bufs(struct pwc_device *pdev)
+{
+	while (!list_empty(&pdev->queued_bufs)) {
+		struct pwc_frame_buf *buf;
+
+		buf = list_entry(pdev->queued_bufs.next, struct pwc_frame_buf,
+				 list);
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+	}
+}
+
 /*********
  * sysfs
  *********/
@@ -1051,98 +646,15 @@ static const char *pwc_sensor_type_to_string(unsigned int sensor_type)
 
 static int pwc_video_open(struct file *file)
 {
-	int i, ret;
 	struct video_device *vdev = video_devdata(file);
 	struct pwc_device *pdev;
 
 	PWC_DEBUG_OPEN(">> video_open called(vdev = 0x%p).\n", vdev);
 
 	pdev = video_get_drvdata(vdev);
-	BUG_ON(!pdev);
-	if (pdev->vopen) {
-		PWC_DEBUG_OPEN("I'm busy, someone is using the device.\n");
-		return -EBUSY;
-	}
-
-	pwc_construct(pdev); /* set min/max sizes correct */
-	if (!pdev->usb_init) {
-		PWC_DEBUG_OPEN("Doing first time initialization.\n");
-		pdev->usb_init = 1;
-
-		/* Query sensor type */
-		ret = pwc_get_cmos_sensor(pdev, &i);
-		if (ret >= 0)
-		{
-			PWC_DEBUG_OPEN("This %s camera is equipped with a %s (%d).\n",
-					pdev->vdev.name,
-					pwc_sensor_type_to_string(i), i);
-		}
-	}
-
-	/* Turn on camera */
-	if (power_save) {
-		i = pwc_camera_power(pdev, 1);
-		if (i < 0)
-			PWC_DEBUG_OPEN("Failed to restore power to the camera! (%d)\n", i);
-	}
-	/* Set LED on/off time */
-	if (pwc_set_leds(pdev, led_on, led_off) < 0)
-		PWC_DEBUG_OPEN("Failed to set LED on/off time.\n");
-
-
-	/* So far, so good. Allocate memory. */
-	i = pwc_allocate_buffers(pdev);
-	if (i < 0) {
-		PWC_DEBUG_OPEN("Failed to allocate buffers memory.\n");
-		pwc_free_buffers(pdev);
-		return i;
-	}
-
-	/* Reset buffers & parameters */
-	pwc_reset_buffers(pdev);
-	for (i = 0; i < pwc_mbufs; i++)
-		pdev->image_used[i] = 0;
-	pdev->vframe_count = 0;
-	pdev->vframes_dumped = 0;
-	pdev->vframes_error = 0;
-	pdev->visoc_errors = 0;
-	pdev->error_status = 0;
-	pwc_construct(pdev); /* set min/max sizes correct */
-
-	/* Set some defaults */
-	pdev->vsnapshot = 0;
-
-	/* Set video size, first try the last used video size
-	   (or the default one); if that fails try QCIF/10 or QSIF/10;
-	   it that fails too, give up.
-	 */
-	i = pwc_set_video_mode(pdev, pwc_image_sizes[pdev->vsize].x, pwc_image_sizes[pdev->vsize].y, pdev->vframes, pdev->vcompression, 0);
-	if (i)	{
-		unsigned int default_resolution;
-		PWC_DEBUG_OPEN("First attempt at set_video_mode failed.\n");
-		if (pdev->type>= 730)
-			default_resolution = PSZ_QSIF;
-		else
-			default_resolution = PSZ_QCIF;
-
-		i = pwc_set_video_mode(pdev,
-				       pwc_image_sizes[default_resolution].x,
-				       pwc_image_sizes[default_resolution].y,
-				       10,
-				       pdev->vcompression,
-				       0);
-	}
-	if (i) {
-		PWC_DEBUG_OPEN("Second attempt at set_video_mode failed.\n");
-		pwc_free_buffers(pdev);
-		return i;
-	}
-
-	/* Initialize the webcam to sane value */
-	pwc_set_brightness(pdev, 0x7fff);
-	pwc_set_agc(pdev, 1, 0);
+	if (!pdev->udev)
+		return -ENODEV;
 
-	pdev->vopen++;
 	file->private_data = vdev;
 	PWC_DEBUG_OPEN("<< video_open() returns 0.\n");
 	return 0;
@@ -1158,239 +670,211 @@ static void pwc_video_release(struct video_device *vfd)
 		if (device_hint[hint].pdev == pdev)
 			device_hint[hint].pdev = NULL;
 
+	/* Free intermediate decompression buffer & tables */
+	if (pdev->decompress_data != NULL) {
+		PWC_DEBUG_MEMORY("Freeing decompression buffer at %p.\n",
+				 pdev->decompress_data);
+		kfree(pdev->decompress_data);
+		pdev->decompress_data = NULL;
+	}
+
+	v4l2_ctrl_handler_free(&pdev->ctrl_handler);
+
 	kfree(pdev);
 }
 
-/* Note that all cleanup is done in the reverse order as in _open */
 static int pwc_video_close(struct file *file)
 {
 	struct video_device *vdev = file->private_data;
 	struct pwc_device *pdev;
-	int i;
 
 	PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev);
 
 	pdev = video_get_drvdata(vdev);
-	if (pdev->vopen == 0)
-		PWC_DEBUG_MODULE("video_close() called on closed device?\n");
-
-	/* Dump statistics, but only if a reasonable amount of frames were
-	   processed (to prevent endless log-entries in case of snap-shot
-	   programs)
-	 */
-	if (pdev->vframe_count > 20)
-		PWC_DEBUG_MODULE("Closing video device: %d frames received, dumped %d frames, %d frames with errors.\n", pdev->vframe_count, pdev->vframes_dumped, pdev->vframes_error);
-
-	if (DEVICE_USE_CODEC1(pdev->type))
-	    pwc_dec1_exit();
-	else
-	    pwc_dec23_exit();
-
-	pwc_isoc_cleanup(pdev);
-	pwc_free_buffers(pdev);
-
-	/* Turn off LEDS and power down camera, but only when not unplugged */
-	if (!pdev->unplugged) {
-		/* Turn LEDs off */
-		if (pwc_set_leds(pdev, 0, 0) < 0)
-			PWC_DEBUG_MODULE("Failed to set LED on/off time.\n");
-		if (power_save) {
-			i = pwc_camera_power(pdev, 0);
-			if (i < 0)
-				PWC_ERROR("Failed to power down camera (%d)\n", i);
-		}
-		pdev->vopen--;
-		PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen);
+	if (pdev->capt_file == file) {
+		vb2_queue_release(&pdev->vb_queue);
+		pdev->capt_file = NULL;
 	}
 
+	PWC_DEBUG_OPEN("<< video_close()\n");
 	return 0;
 }
 
-/*
- *	FIXME: what about two parallel reads ????
- *      ANSWER: Not supported. You can't open the device more than once,
-		despite what the V4L1 interface says. First, I don't see
-		the need, second there's no mechanism of alerting the
-		2nd/3rd/... process of events like changing image size.
-		And I don't see the point of blocking that for the
-		2nd/3rd/... process.
-		In multi-threaded environments reading parallel from any
-		device is tricky anyhow.
- */
-
 static ssize_t pwc_video_read(struct file *file, char __user *buf,
-			  size_t count, loff_t *ppos)
+			      size_t count, loff_t *ppos)
 {
 	struct video_device *vdev = file->private_data;
-	struct pwc_device *pdev;
-	int noblock = file->f_flags & O_NONBLOCK;
-	DECLARE_WAITQUEUE(wait, current);
-	int bytes_to_read, rv = 0;
-	void *image_buffer_addr;
-
-	PWC_DEBUG_READ("pwc_video_read(vdev=0x%p, buf=%p, count=%zd) called.\n",
-			vdev, buf, count);
-	if (vdev == NULL)
-		return -EFAULT;
-	pdev = video_get_drvdata(vdev);
-	if (pdev == NULL)
-		return -EFAULT;
+	struct pwc_device *pdev = video_get_drvdata(vdev);
 
-	if (pdev->error_status) {
-		rv = -pdev->error_status; /* Something happened, report what. */
-		goto err_out;
-	}
+	if (!pdev->udev)
+		return -ENODEV;
 
-	/* Start the stream (if not already started) */
-	rv = pwc_isoc_init(pdev);
-	if (rv)
-		goto err_out;
-
-	/* In case we're doing partial reads, we don't have to wait for a frame */
-	if (pdev->image_read_pos == 0) {
-		/* Do wait queueing according to the (doc)book */
-		add_wait_queue(&pdev->frameq, &wait);
-		while (pdev->full_frames == NULL) {
-			/* Check for unplugged/etc. here */
-			if (pdev->error_status) {
-				remove_wait_queue(&pdev->frameq, &wait);
-				set_current_state(TASK_RUNNING);
-				rv = -pdev->error_status ;
-				goto err_out;
-			}
-			if (noblock) {
-				remove_wait_queue(&pdev->frameq, &wait);
-				set_current_state(TASK_RUNNING);
-				rv = -EWOULDBLOCK;
-				goto err_out;
-			}
-			if (signal_pending(current)) {
-				remove_wait_queue(&pdev->frameq, &wait);
-				set_current_state(TASK_RUNNING);
-				rv = -ERESTARTSYS;
-				goto err_out;
-			}
-			mutex_unlock(&pdev->modlock);
-			schedule();
-			set_current_state(TASK_INTERRUPTIBLE);
-			mutex_lock(&pdev->modlock);
-		}
-		remove_wait_queue(&pdev->frameq, &wait);
-		set_current_state(TASK_RUNNING);
+	if (pdev->capt_file != NULL &&
+	    pdev->capt_file != file)
+		return -EBUSY;
 
-		/* Decompress and release frame */
-		if (pwc_handle_frame(pdev)) {
-			rv = -EFAULT;
-			goto err_out;
-		}
-	}
+	pdev->capt_file = file;
 
-	PWC_DEBUG_READ("Copying data to user space.\n");
-	if (pdev->pixfmt != V4L2_PIX_FMT_YUV420)
-		bytes_to_read = pdev->frame_size + sizeof(struct pwc_raw_frame);
-	else
-		bytes_to_read = pdev->view.size;
-
-	/* copy bytes to user space; we allow for partial reads */
-	if (count + pdev->image_read_pos > bytes_to_read)
-		count = bytes_to_read - pdev->image_read_pos;
-	image_buffer_addr = pdev->image_data;
-	image_buffer_addr += pdev->images[pdev->fill_image].offset;
-	image_buffer_addr += pdev->image_read_pos;
-	if (copy_to_user(buf, image_buffer_addr, count)) {
-		rv = -EFAULT;
-		goto err_out;
-	}
-	pdev->image_read_pos += count;
-	if (pdev->image_read_pos >= bytes_to_read) { /* All data has been read */
-		pdev->image_read_pos = 0;
-		pwc_next_image(pdev);
-	}
-	return count;
-err_out:
-	return rv;
+	return vb2_read(&pdev->vb_queue, buf, count, ppos,
+			file->f_flags & O_NONBLOCK);
 }
 
 static unsigned int pwc_video_poll(struct file *file, poll_table *wait)
 {
 	struct video_device *vdev = file->private_data;
-	struct pwc_device *pdev;
-	int ret;
+	struct pwc_device *pdev = video_get_drvdata(vdev);
 
-	if (vdev == NULL)
-		return -EFAULT;
-	pdev = video_get_drvdata(vdev);
-	if (pdev == NULL)
-		return -EFAULT;
+	if (!pdev->udev)
+		return POLL_ERR;
 
-	/* Start the stream (if not already started) */
-	ret = pwc_isoc_init(pdev);
-	if (ret)
-		return ret;
+	return vb2_poll(&pdev->vb_queue, file, wait);
+}
+
+static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct video_device *vdev = file->private_data;
+	struct pwc_device *pdev = video_get_drvdata(vdev);
+
+	if (pdev->capt_file != file)
+		return -EBUSY;
+
+	return vb2_mmap(&pdev->vb_queue, vma);
+}
+
+/***************************************************************************/
+/* Videobuf2 operations */
+
+static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+				unsigned int *nplanes, unsigned long sizes[],
+				void *alloc_ctxs[])
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vq);
+
+	if (*nbuffers < MIN_FRAMES)
+		*nbuffers = MIN_FRAMES;
+	else if (*nbuffers > MAX_FRAMES)
+		*nbuffers = MAX_FRAMES;
+
+	*nplanes = 1;
 
-	poll_wait(file, &pdev->frameq, wait);
-	if (pdev->error_status)
-		return POLLERR;
-	if (pdev->full_frames != NULL) /* we have frames waiting */
-		return (POLLIN | POLLRDNORM);
+	sizes[0] = PAGE_ALIGN((pdev->abs_max.x * pdev->abs_max.y * 3) / 2);
 
 	return 0;
 }
 
-static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma)
+static int buffer_init(struct vb2_buffer *vb)
 {
-	struct video_device *vdev = file->private_data;
-	struct pwc_device *pdev;
-	unsigned long start;
-	unsigned long size;
-	unsigned long page, pos = 0;
-	int index;
+	struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb);
 
-	PWC_DEBUG_MEMORY(">> %s\n", __func__);
-	pdev = video_get_drvdata(vdev);
-	size = vma->vm_end - vma->vm_start;
-	start = vma->vm_start;
+	/* need vmalloc since frame buffer > 128K */
+	buf->data = vzalloc(PWC_FRAME_SIZE);
+	if (buf->data == NULL)
+		return -ENOMEM;
 
-	/* Find the idx buffer for this mapping */
-	for (index = 0; index < pwc_mbufs; index++) {
-		pos = pdev->images[index].offset;
-		if ((pos>>PAGE_SHIFT) == vma->vm_pgoff)
-			break;
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue);
+
+	/* Don't allow queing new buffers after device disconnection */
+	if (!pdev->udev)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int buffer_finish(struct vb2_buffer *vb)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue);
+	struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb);
+
+	/*
+	 * Application has called dqbuf and is getting back a buffer we've
+	 * filled, take the pwc data we've stored in buf->data and decompress
+	 * it into a usable format, storing the result in the vb2_buffer
+	 */
+	return pwc_decompress(pdev, buf);
+}
+
+static void buffer_cleanup(struct vb2_buffer *vb)
+{
+	struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb);
+
+	vfree(buf->data);
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue);
+	struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb);
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&pdev->queued_bufs_lock, flags);
+	list_add_tail(&buf->list, &pdev->queued_bufs);
+	spin_unlock_irqrestore(&pdev->queued_bufs_lock, flags);
+}
+
+static int start_streaming(struct vb2_queue *vq)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vq);
+
+	if (!pdev->udev)
+		return -ENODEV;
+
+	/* Turn on camera and set LEDS on */
+	pwc_camera_power(pdev, 1);
+	if (pdev->power_save) {
+		/* Restore video mode */
+		pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y,
+				   pdev->vframes, pdev->vcompression,
+				   pdev->vsnapshot);
 	}
-	if (index == MAX_IMAGES)
-		return -EINVAL;
-	if (index == 0) {
-		/*
-		 * Special case for v4l1. In v4l1, we map only one big buffer,
-		 * but in v4l2 each buffer is mapped
-		 */
-		unsigned long total_size;
-		total_size = pwc_mbufs * pdev->len_per_image;
-		if (size != pdev->len_per_image && size != total_size) {
-			PWC_ERROR("Wrong size (%lu) needed to be len_per_image=%d or total_size=%lu\n",
-				   size, pdev->len_per_image, total_size);
-			return -EINVAL;
-		}
-	} else if (size > pdev->len_per_image)
-		return -EINVAL;
-
-	vma->vm_flags |= VM_IO;	/* from 2.6.9-acX */
-
-	pos += (unsigned long)pdev->image_data;
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
-			return -EAGAIN;
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -= PAGE_SIZE;
-		else
-			size = 0;
+	pwc_set_leds(pdev, led_on, led_off);
+
+	return pwc_isoc_init(pdev);
+}
+
+static int stop_streaming(struct vb2_queue *vq)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vq);
+
+	if (pdev->udev) {
+		pwc_set_leds(pdev, 0, 0);
+		pwc_camera_power(pdev, 0);
+		pwc_isoc_cleanup(pdev);
 	}
+	pwc_cleanup_queued_bufs(pdev);
+
 	return 0;
 }
 
+static void pwc_lock(struct vb2_queue *vq)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vq);
+	mutex_lock(&pdev->modlock);
+}
+
+static void pwc_unlock(struct vb2_queue *vq)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vq);
+	mutex_unlock(&pdev->modlock);
+}
+
+static struct vb2_ops pwc_vb_queue_ops = {
+	.queue_setup		= queue_setup,
+	.buf_init		= buffer_init,
+	.buf_prepare		= buffer_prepare,
+	.buf_finish		= buffer_finish,
+	.buf_cleanup		= buffer_cleanup,
+	.buf_queue		= buffer_queue,
+	.start_streaming	= start_streaming,
+	.stop_streaming		= stop_streaming,
+	.wait_prepare		= pwc_unlock,
+	.wait_finish		= pwc_lock,
+};
+
 /***************************************************************************/
 /* USB functions */
 
@@ -1406,6 +890,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	int hint, rc;
 	int features = 0;
 	int video_nr = -1; /* default: use next available device */
+	int my_power_save = power_save;
 	char serial_number[30], *name;
 
 	vendor_id = le16_to_cpu(udev->descriptor.idVendor);
@@ -1513,6 +998,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 			PWC_INFO("Logitech QuickCam 4000 Pro USB webcam detected.\n");
 			name = "Logitech QuickCam Pro 4000";
 			type_id = 740; /* CCD sensor */
+			if (my_power_save == -1)
+				my_power_save = 1;
 			break;
 		case 0x08b3:
 			PWC_INFO("Logitech QuickCam Zoom USB webcam detected.\n");
@@ -1523,12 +1010,15 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 			PWC_INFO("Logitech QuickCam Zoom (new model) USB webcam detected.\n");
 			name = "Logitech QuickCam Zoom";
 			type_id = 740; /* CCD sensor */
-			power_save = 1;
+			if (my_power_save == -1)
+				my_power_save = 1;
 			break;
 		case 0x08b5:
 			PWC_INFO("Logitech QuickCam Orbit/Sphere USB webcam detected.\n");
 			name = "Logitech QuickCam Orbit";
 			type_id = 740; /* CCD sensor */
+			if (my_power_save == -1)
+				my_power_save = 1;
 			features |= FEATURE_MOTOR_PANTILT;
 			break;
 		case 0x08b6:
@@ -1583,6 +1073,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 			PWC_INFO("Creative Labs Webcam 5 detected.\n");
 			name = "Creative Labs Webcam 5";
 			type_id = 730;
+			if (my_power_save == -1)
+				my_power_save = 1;
 			break;
 		case 0x4011:
 			PWC_INFO("Creative Labs Webcam Pro Ex detected.\n");
@@ -1640,6 +1132,9 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	else
 		return -ENODEV; /* Not any of the know types; but the list keeps growing. */
 
+	if (my_power_save == -1)
+		my_power_save = 0;
+
 	memset(serial_number, 0, 30);
 	usb_string(udev, udev->descriptor.iSerialNumber, serial_number, 29);
 	PWC_DEBUG_PROBE("Device serial number is %s\n", serial_number);
@@ -1654,7 +1149,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 		return -ENOMEM;
 	}
 	pdev->type = type_id;
-	pdev->vsize = default_size;
 	pdev->vframes = default_fps;
 	strcpy(pdev->serial, serial_number);
 	pdev->features = features;
@@ -1668,13 +1162,26 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 		pdev->angle_range.tilt_min = -3000;
 		pdev->angle_range.tilt_max =  2500;
 	}
+	pwc_construct(pdev); /* set min/max sizes correct */
 
 	mutex_init(&pdev->modlock);
-	spin_lock_init(&pdev->ptrlock);
+	mutex_init(&pdev->udevlock);
+	spin_lock_init(&pdev->queued_bufs_lock);
+	INIT_LIST_HEAD(&pdev->queued_bufs);
 
 	pdev->udev = udev;
-	init_waitqueue_head(&pdev->frameq);
 	pdev->vcompression = pwc_preferred_compression;
+	pdev->power_save = my_power_save;
+
+	/* Init videobuf2 queue structure */
+	memset(&pdev->vb_queue, 0, sizeof(pdev->vb_queue));
+	pdev->vb_queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	pdev->vb_queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
+	pdev->vb_queue.drv_priv = pdev;
+	pdev->vb_queue.buf_struct_size = sizeof(struct pwc_frame_buf);
+	pdev->vb_queue.ops = &pwc_vb_queue_ops;
+	pdev->vb_queue.mem_ops = &vb2_vmalloc_memops;
+	vb2_queue_init(&pdev->vb_queue);
 
 	/* Init video_device structure */
 	memcpy(&pdev->vdev, &pwc_template, sizeof(pwc_template));
@@ -1707,14 +1214,40 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	PWC_DEBUG_PROBE("probe() function returning struct at 0x%p.\n", pdev);
 	usb_set_intfdata(intf, pdev);
 
+#ifdef CONFIG_USB_PWC_DEBUG
+	/* Query sensor type */
+	if (pwc_get_cmos_sensor(pdev, &rc) >= 0) {
+		PWC_DEBUG_OPEN("This %s camera is equipped with a %s (%d).\n",
+				pdev->vdev.name,
+				pwc_sensor_type_to_string(rc), rc);
+	}
+#endif
+
 	/* Set the leds off */
 	pwc_set_leds(pdev, 0, 0);
+
+	/* Setup intial videomode */
+	rc = pwc_set_video_mode(pdev, pdev->view_max.x, pdev->view_max.y,
+				pdev->vframes, pdev->vcompression, 0);
+	if (rc)
+		goto err_free_mem;
+
+	/* Register controls (and read default values from camera */
+	rc = pwc_init_controls(pdev);
+	if (rc) {
+		PWC_ERROR("Failed to register v4l2 controls (%d).\n", rc);
+		goto err_free_mem;
+	}
+
+	pdev->vdev.ctrl_handler = &pdev->ctrl_handler;
+
+	/* And powerdown the camera until streaming starts */
 	pwc_camera_power(pdev, 0);
 
 	rc = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, video_nr);
 	if (rc < 0) {
 		PWC_ERROR("Failed to register as video device (%d).\n", rc);
-		goto err_free_mem;
+		goto err_free_controls;
 	}
 	rc = pwc_create_sysfs_files(pdev);
 	if (rc)
@@ -1757,7 +1290,10 @@ err_video_unreg:
 	if (hint < MAX_DEV_HINTS)
 		device_hint[hint].pdev = NULL;
 	video_unregister_device(&pdev->vdev);
+err_free_controls:
+	v4l2_ctrl_handler_free(&pdev->ctrl_handler);
 err_free_mem:
+	usb_set_intfdata(intf, NULL);
 	kfree(pdev);
 	return rc;
 }
@@ -1767,33 +1303,17 @@ static void usb_pwc_disconnect(struct usb_interface *intf)
 {
 	struct pwc_device *pdev  = usb_get_intfdata(intf);
 
+	mutex_lock(&pdev->udevlock);
 	mutex_lock(&pdev->modlock);
-	usb_set_intfdata (intf, NULL);
-	if (pdev == NULL) {
-		PWC_ERROR("pwc_disconnect() Called without private pointer.\n");
-		goto disconnect_out;
-	}
-	if (pdev->udev == NULL) {
-		PWC_ERROR("pwc_disconnect() already called for %p\n", pdev);
-		goto disconnect_out;
-	}
-	if (pdev->udev != interface_to_usbdev(intf)) {
-		PWC_ERROR("pwc_disconnect() Woops: pointer mismatch udev/pdev.\n");
-		goto disconnect_out;
-	}
-
-	/* We got unplugged; this is signalled by an EPIPE error code */
-	pdev->error_status = EPIPE;
-	pdev->unplugged = 1;
-
-	/* Alert waiting processes */
-	wake_up_interruptible(&pdev->frameq);
 
+	usb_set_intfdata(intf, NULL);
 	/* No need to keep the urbs around after disconnection */
 	pwc_isoc_cleanup(pdev);
+	pwc_cleanup_queued_bufs(pdev);
+	pdev->udev = NULL;
 
-disconnect_out:
 	mutex_unlock(&pdev->modlock);
+	mutex_unlock(&pdev->udevlock);
 
 	pwc_remove_sysfs_files(pdev);
 	video_unregister_device(&pdev->vdev);
@@ -1809,36 +1329,27 @@ disconnect_out:
  * Initialization code & module stuff
  */
 
-static char *size;
 static int fps;
-static int fbufs;
-static int mbufs;
 static int compression = -1;
 static int leds[2] = { -1, -1 };
 static unsigned int leds_nargs;
 static char *dev_hint[MAX_DEV_HINTS];
 static unsigned int dev_hint_nargs;
 
-module_param(size, charp, 0444);
 module_param(fps, int, 0444);
-module_param(fbufs, int, 0444);
-module_param(mbufs, int, 0444);
 #ifdef CONFIG_USB_PWC_DEBUG
 module_param_named(trace, pwc_trace, int, 0644);
 #endif
-module_param(power_save, int, 0444);
+module_param(power_save, int, 0644);
 module_param(compression, int, 0444);
 module_param_array(leds, int, &leds_nargs, 0444);
 module_param_array(dev_hint, charp, &dev_hint_nargs, 0444);
 
-MODULE_PARM_DESC(size, "Initial image size. One of sqcif, qsif, qcif, sif, cif, vga");
 MODULE_PARM_DESC(fps, "Initial frames per second. Varies with model, useful range 5-30");
-MODULE_PARM_DESC(fbufs, "Number of internal frame buffers to reserve");
-MODULE_PARM_DESC(mbufs, "Number of external (mmap()ed) image buffers");
 #ifdef CONFIG_USB_PWC_DEBUG
 MODULE_PARM_DESC(trace, "For debugging purposes");
 #endif
-MODULE_PARM_DESC(power_save, "Turn power save feature in camera on or off");
+MODULE_PARM_DESC(power_save, "Turn power saving for new cameras on or off");
 MODULE_PARM_DESC(compression, "Preferred compression quality. Range 0 (uncompressed) to 3 (high compression)");
 MODULE_PARM_DESC(leds, "LED on,off time in milliseconds");
 MODULE_PARM_DESC(dev_hint, "Device node hints");
@@ -1851,14 +1362,19 @@ MODULE_VERSION( PWC_VERSION );
 
 static int __init usb_pwc_init(void)
 {
-	int i, sz;
-	char *sizenames[PSZ_MAX] = { "sqcif", "qsif", "qcif", "sif", "cif", "vga" };
+	int i;
 
+#ifdef CONFIG_USB_PWC_DEBUG
 	PWC_INFO("Philips webcam module version " PWC_VERSION " loaded.\n");
 	PWC_INFO("Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.\n");
 	PWC_INFO("Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,\n");
 	PWC_INFO("the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.\n");
 
+	if (pwc_trace >= 0) {
+		PWC_DEBUG_MODULE("Trace options: 0x%04x\n", pwc_trace);
+	}
+#endif
+
 	if (fps) {
 		if (fps < 4 || fps > 30) {
 			PWC_ERROR("Framerate out of bounds (4-30).\n");
@@ -1868,41 +1384,6 @@ static int __init usb_pwc_init(void)
 		PWC_DEBUG_MODULE("Default framerate set to %d.\n", default_fps);
 	}
 
-	if (size) {
-		/* string; try matching with array */
-		for (sz = 0; sz < PSZ_MAX; sz++) {
-			if (!strcmp(sizenames[sz], size)) { /* Found! */
-				default_size = sz;
-				break;
-			}
-		}
-		if (sz == PSZ_MAX) {
-			PWC_ERROR("Size not recognized; try size=[sqcif | qsif | qcif | sif | cif | vga].\n");
-			return -EINVAL;
-		}
-		PWC_DEBUG_MODULE("Default image size set to %s [%dx%d].\n", sizenames[default_size], pwc_image_sizes[default_size].x, pwc_image_sizes[default_size].y);
-	}
-	if (mbufs) {
-		if (mbufs < 1 || mbufs > MAX_IMAGES) {
-			PWC_ERROR("Illegal number of mmap() buffers; use a number between 1 and %d.\n", MAX_IMAGES);
-			return -EINVAL;
-		}
-		pwc_mbufs = mbufs;
-		PWC_DEBUG_MODULE("Number of image buffers set to %d.\n", pwc_mbufs);
-	}
-	if (fbufs) {
-		if (fbufs < 2 || fbufs > MAX_FRAMES) {
-			PWC_ERROR("Illegal number of frame buffers; use a number between 2 and %d.\n", MAX_FRAMES);
-			return -EINVAL;
-		}
-		default_fbufs = fbufs;
-		PWC_DEBUG_MODULE("Number of frame buffers set to %d.\n", default_fbufs);
-	}
-#ifdef CONFIG_USB_PWC_DEBUG
-	if (pwc_trace >= 0) {
-		PWC_DEBUG_MODULE("Trace options: 0x%04x\n", pwc_trace);
-	}
-#endif
 	if (compression >= 0) {
 		if (compression > 3) {
 			PWC_ERROR("Invalid compression setting; use a number between 0 (uncompressed) and 3 (high).\n");
@@ -1911,8 +1392,6 @@ static int __init usb_pwc_init(void)
 		pwc_preferred_compression = compression;
 		PWC_DEBUG_MODULE("Preferred compression set to %d.\n", pwc_preferred_compression);
 	}
-	if (power_save)
-		PWC_DEBUG_MODULE("Enabling power save on open/close.\n");
 	if (leds[0] >= 0)
 		led_on = leds[0];
 	if (leds[1] >= 0)
diff --git a/drivers/media/video/pwc/pwc-ioctl.h b/drivers/media/video/pwc/pwc-ioctl.h
deleted file mode 100644
index 8c0cae7..0000000
--- a/drivers/media/video/pwc/pwc-ioctl.h
+++ /dev/null
@@ -1,323 +0,0 @@
-#ifndef PWC_IOCTL_H
-#define PWC_IOCTL_H
-
-/* (C) 2001-2004 Nemosoft Unv.
-   (C) 2004-2006 Luc Saillard (luc@saillard.org)
-
-   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
-   driver and thus may have bugs that are not present in the original version.
-   Please send bug reports and support requests to <luc@saillard.org>.
-   The decompression routines have been implemented by reverse-engineering the
-   Nemosoft binary pwcx module. Caveat emptor.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-/* This is pwc-ioctl.h belonging to PWC 10.0.10
-   It contains structures and defines to communicate from user space
-   directly to the driver.
- */
-
-/*
-   Changes
-   2001/08/03  Alvarado   Added ioctl constants to access methods for
-			  changing white balance and red/blue gains
-   2002/12/15  G. H. Fernandez-Toribio   VIDIOCGREALSIZE
-   2003/12/13  Nemosft Unv. Some modifications to make interfacing to
-	       PWCX easier
- */
-
-/* These are private ioctl() commands, specific for the Philips webcams.
-   They contain functions not found in other webcams, and settings not
-   specified in the Video4Linux API.
-
-   The #define names are built up like follows:
-   VIDIOC		VIDeo IOCtl prefix
-	 PWC		Philps WebCam
-	    G           optional: Get
-	    S           optional: Set
-	     ... 	the function
- */
-
-#include <linux/types.h>
-#include <linux/version.h>
-
- /* Enumeration of image sizes */
-#define PSZ_SQCIF	0x00
-#define PSZ_QSIF	0x01
-#define PSZ_QCIF	0x02
-#define PSZ_SIF		0x03
-#define PSZ_CIF		0x04
-#define PSZ_VGA		0x05
-#define PSZ_MAX		6
-
-
-/* The frame rate is encoded in the video_window.flags parameter using
-   the upper 16 bits, since some flags are defined nowadays. The following
-   defines provide a mask and shift to filter out this value.
-   This value can also be passing using the private flag when using v4l2 and
-   VIDIOC_S_FMT ioctl.
-
-   In 'Snapshot' mode the camera freezes its automatic exposure and colour
-   balance controls.
- */
-#define PWC_FPS_SHIFT		16
-#define PWC_FPS_MASK		0x00FF0000
-#define PWC_FPS_FRMASK		0x003F0000
-#define PWC_FPS_SNAPSHOT	0x00400000
-#define PWC_QLT_MASK		0x03000000
-#define PWC_QLT_SHIFT		24
-
-
-/* structure for transferring x & y coordinates */
-struct pwc_coord
-{
-	int x, y;		/* guess what */
-	int size;		/* size, or offset */
-};
-
-
-/* Used with VIDIOCPWCPROBE */
-struct pwc_probe
-{
-	char name[32];
-	int type;
-};
-
-struct pwc_serial
-{
-	char serial[30];	/* String with serial number. Contains terminating 0 */
-};
-
-/* pwc_whitebalance.mode values */
-#define PWC_WB_INDOOR		0
-#define PWC_WB_OUTDOOR		1
-#define PWC_WB_FL		2
-#define PWC_WB_MANUAL		3
-#define PWC_WB_AUTO		4
-
-/* Used with VIDIOCPWC[SG]AWB (Auto White Balance).
-   Set mode to one of the PWC_WB_* values above.
-   *red and *blue are the respective gains of these colour components inside
-   the camera; range 0..65535
-   When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read;
-   otherwise undefined.
-   'read_red' and 'read_blue' are read-only.
-*/
-struct pwc_whitebalance
-{
-	int mode;
-	int manual_red, manual_blue;	/* R/W */
-	int read_red, read_blue;	/* R/O */
-};
-
-/*
-   'control_speed' and 'control_delay' are used in automatic whitebalance mode,
-   and tell the camera how fast it should react to changes in lighting, and
-   with how much delay. Valid values are 0..65535.
-*/
-struct pwc_wb_speed
-{
-	int control_speed;
-	int control_delay;
-
-};
-
-/* Used with VIDIOCPWC[SG]LED */
-struct pwc_leds
-{
-	int led_on;			/* Led on-time; range = 0..25000 */
-	int led_off;			/* Led off-time; range = 0..25000  */
-};
-
-/* Image size (used with GREALSIZE) */
-struct pwc_imagesize
-{
-	int width;
-	int height;
-};
-
-/* Defines and structures for Motorized Pan & Tilt */
-#define PWC_MPT_PAN		0x01
-#define PWC_MPT_TILT		0x02
-#define PWC_MPT_TIMEOUT		0x04 /* for status */
-
-/* Set angles; when absolute != 0, the angle is absolute and the
-   driver calculates the relative offset for you. This can only
-   be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns
-   absolute angles.
- */
-struct pwc_mpt_angles
-{
-	int absolute;		/* write-only */
-	int pan;		/* degrees * 100 */
-	int tilt;		/* degress * 100 */
-};
-
-/* Range of angles of the camera, both horizontally and vertically.
- */
-struct pwc_mpt_range
-{
-	int pan_min, pan_max;		/* degrees * 100 */
-	int tilt_min, tilt_max;
-};
-
-struct pwc_mpt_status
-{
-	int status;
-	int time_pan;
-	int time_tilt;
-};
-
-
-/* This is used for out-of-kernel decompression. With it, you can get
-   all the necessary information to initialize and use the decompressor
-   routines in standalone applications.
- */
-struct pwc_video_command
-{
-	int type;		/* camera type (645, 675, 730, etc.) */
-	int release;		/* release number */
-
-	int size;		/* one of PSZ_* */
-	int alternate;
-	int command_len;	/* length of USB video command */
-	unsigned char command_buf[13];	/* Actual USB video command */
-	int bandlength;		/* >0 = compressed */
-	int frame_size;		/* Size of one (un)compressed frame */
-};
-
-/* Flags for PWCX subroutines. Not all modules honour all flags. */
-#define PWCX_FLAG_PLANAR	0x0001
-#define PWCX_FLAG_BAYER		0x0008
-
-
-/* IOCTL definitions */
-
- /* Restore user settings */
-#define VIDIOCPWCRUSER		_IO('v', 192)
- /* Save user settings */
-#define VIDIOCPWCSUSER		_IO('v', 193)
- /* Restore factory settings */
-#define VIDIOCPWCFACTORY	_IO('v', 194)
-
- /* You can manipulate the compression factor. A compression preference of 0
-    means use uncompressed modes when available; 1 is low compression, 2 is
-    medium and 3 is high compression preferred. Of course, the higher the
-    compression, the lower the bandwidth used but more chance of artefacts
-    in the image. The driver automatically chooses a higher compression when
-    the preferred mode is not available.
-  */
- /* Set preferred compression quality (0 = uncompressed, 3 = highest compression) */
-#define VIDIOCPWCSCQUAL		_IOW('v', 195, int)
- /* Get preferred compression quality */
-#define VIDIOCPWCGCQUAL		_IOR('v', 195, int)
-
-
-/* Retrieve serial number of camera */
-#define VIDIOCPWCGSERIAL	_IOR('v', 198, struct pwc_serial)
-
- /* This is a probe function; since so many devices are supported, it
-    becomes difficult to include all the names in programs that want to
-    check for the enhanced Philips stuff. So in stead, try this PROBE;
-    it returns a structure with the original name, and the corresponding
-    Philips type.
-    To use, fill the structure with zeroes, call PROBE and if that succeeds,
-    compare the name with that returned from VIDIOCGCAP; they should be the
-    same. If so, you can be assured it is a Philips (OEM) cam and the type
-    is valid.
- */
-#define VIDIOCPWCPROBE		_IOR('v', 199, struct pwc_probe)
-
- /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */
-#define VIDIOCPWCSAGC		_IOW('v', 200, int)
- /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */
-#define VIDIOCPWCGAGC		_IOR('v', 200, int)
- /* Set shutter speed; int < 0 = auto; >= 0 = fixed, range 0..65535 */
-#define VIDIOCPWCSSHUTTER	_IOW('v', 201, int)
-
- /* Color compensation (Auto White Balance) */
-#define VIDIOCPWCSAWB           _IOW('v', 202, struct pwc_whitebalance)
-#define VIDIOCPWCGAWB           _IOR('v', 202, struct pwc_whitebalance)
-
- /* Auto WB speed */
-#define VIDIOCPWCSAWBSPEED	_IOW('v', 203, struct pwc_wb_speed)
-#define VIDIOCPWCGAWBSPEED	_IOR('v', 203, struct pwc_wb_speed)
-
- /* LEDs on/off/blink; int range 0..65535 */
-#define VIDIOCPWCSLED           _IOW('v', 205, struct pwc_leds)
-#define VIDIOCPWCGLED           _IOR('v', 205, struct pwc_leds)
-
-  /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */
-#define VIDIOCPWCSCONTOUR	_IOW('v', 206, int)
-#define VIDIOCPWCGCONTOUR	_IOR('v', 206, int)
-
-  /* Backlight compensation; 0 = off, otherwise on */
-#define VIDIOCPWCSBACKLIGHT	_IOW('v', 207, int)
-#define VIDIOCPWCGBACKLIGHT	_IOR('v', 207, int)
-
-  /* Flickerless mode; = 0 off, otherwise on */
-#define VIDIOCPWCSFLICKER	_IOW('v', 208, int)
-#define VIDIOCPWCGFLICKER	_IOR('v', 208, int)
-
-  /* Dynamic noise reduction; 0 off, 3 = high noise reduction */
-#define VIDIOCPWCSDYNNOISE	_IOW('v', 209, int)
-#define VIDIOCPWCGDYNNOISE	_IOR('v', 209, int)
-
- /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */
-#define VIDIOCPWCGREALSIZE	_IOR('v', 210, struct pwc_imagesize)
-
- /* Motorized pan & tilt functions */
-#define VIDIOCPWCMPTRESET	_IOW('v', 211, int)
-#define VIDIOCPWCMPTGRANGE	_IOR('v', 211, struct pwc_mpt_range)
-#define VIDIOCPWCMPTSANGLE	_IOW('v', 212, struct pwc_mpt_angles)
-#define VIDIOCPWCMPTGANGLE	_IOR('v', 212, struct pwc_mpt_angles)
-#define VIDIOCPWCMPTSTATUS	_IOR('v', 213, struct pwc_mpt_status)
-
- /* Get the USB set-video command; needed for initializing libpwcx */
-#define VIDIOCPWCGVIDCMD	_IOR('v', 215, struct pwc_video_command)
-struct pwc_table_init_buffer {
-   int len;
-   char *buffer;
-
-};
-#define VIDIOCPWCGVIDTABLE	_IOR('v', 216, struct pwc_table_init_buffer)
-
-/*
- * This is private command used when communicating with v4l2.
- * In the future all private ioctl will be remove/replace to
- * use interface offer by v4l2.
- */
-
-#define V4L2_CID_PRIVATE_SAVE_USER       (V4L2_CID_PRIVATE_BASE + 0)
-#define V4L2_CID_PRIVATE_RESTORE_USER    (V4L2_CID_PRIVATE_BASE + 1)
-#define V4L2_CID_PRIVATE_RESTORE_FACTORY (V4L2_CID_PRIVATE_BASE + 2)
-#define V4L2_CID_PRIVATE_COLOUR_MODE     (V4L2_CID_PRIVATE_BASE + 3)
-#define V4L2_CID_PRIVATE_AUTOCONTOUR     (V4L2_CID_PRIVATE_BASE + 4)
-#define V4L2_CID_PRIVATE_CONTOUR         (V4L2_CID_PRIVATE_BASE + 5)
-#define V4L2_CID_PRIVATE_BACKLIGHT       (V4L2_CID_PRIVATE_BASE + 6)
-#define V4L2_CID_PRIVATE_FLICKERLESS     (V4L2_CID_PRIVATE_BASE + 7)
-#define V4L2_CID_PRIVATE_NOISE_REDUCTION (V4L2_CID_PRIVATE_BASE + 8)
-
-struct pwc_raw_frame {
-   __le16 type;		/* type of the webcam */
-   __le16 vbandlength;	/* Size of 4lines compressed (used by the decompressor) */
-   __u8   cmd[4];	/* the four byte of the command (in case of nala,
-			   only the first 3 bytes is filled) */
-   __u8   rawframe[0];	/* frame_size = H/4*vbandlength */
-} __attribute__ ((packed));
-
-
-#endif
diff --git a/drivers/media/video/pwc/pwc-kiara.c b/drivers/media/video/pwc/pwc-kiara.c
index f4ae83c..e5f4fd8 100644
--- a/drivers/media/video/pwc/pwc-kiara.c
+++ b/drivers/media/video/pwc/pwc-kiara.c
@@ -40,7 +40,6 @@
 
 
 #include "pwc-kiara.h"
-#include "pwc-uncompress.h"
 
 const unsigned int Kiara_fps_vector[PWC_FPS_MAX_KIARA] = { 5, 10, 15, 20, 25, 30 };
 
diff --git a/drivers/media/video/pwc/pwc-misc.c b/drivers/media/video/pwc/pwc-misc.c
index 6af5bb5..0b03133 100644
--- a/drivers/media/video/pwc/pwc-misc.c
+++ b/drivers/media/video/pwc/pwc-misc.c
@@ -126,8 +126,4 @@ void pwc_construct(struct pwc_device *pdev)
 	pdev->pixfmt = V4L2_PIX_FMT_YUV420; /* default */
 	pdev->view_min.size = pdev->view_min.x * pdev->view_min.y;
 	pdev->view_max.size = pdev->view_max.x * pdev->view_max.y;
-	/* length of image, in YUV format; always allocate enough memory. */
-	pdev->len_per_image = PAGE_ALIGN((pdev->abs_max.x * pdev->abs_max.y * 3) / 2);
 }
-
-
diff --git a/drivers/media/video/pwc/pwc-uncompress.c b/drivers/media/video/pwc/pwc-uncompress.c
index 3b73f29..5126509 100644
--- a/drivers/media/video/pwc/pwc-uncompress.c
+++ b/drivers/media/video/pwc/pwc-uncompress.c
@@ -30,26 +30,17 @@
 #include <asm/types.h>
 
 #include "pwc.h"
-#include "pwc-uncompress.h"
 #include "pwc-dec1.h"
 #include "pwc-dec23.h"
 
-int pwc_decompress(struct pwc_device *pdev)
+int pwc_decompress(struct pwc_device *pdev, struct pwc_frame_buf *fbuf)
 {
-	struct pwc_frame_buf *fbuf;
 	int n, line, col, stride;
 	void *yuv, *image;
 	u16 *src;
 	u16 *dsty, *dstu, *dstv;
 
-	if (pdev == NULL)
-		return -EFAULT;
-
-	fbuf = pdev->read_frame;
-	if (fbuf == NULL)
-		return -EFAULT;
-	image  = pdev->image_data;
-	image += pdev->images[pdev->fill_image].offset;
+	image = vb2_plane_vaddr(&fbuf->vb, 0);
 
 	yuv = fbuf->data + pdev->frame_header_size;  /* Skip header */
 
@@ -64,9 +55,13 @@ int pwc_decompress(struct pwc_device *pdev)
 			 * determine this using the type of the webcam */
 		memcpy(raw_frame->cmd, pdev->cmd_buf, 4);
 		memcpy(raw_frame+1, yuv, pdev->frame_size);
+		vb2_set_plane_payload(&fbuf->vb, 0,
+			pdev->frame_size + sizeof(struct pwc_raw_frame));
 		return 0;
 	}
 
+	vb2_set_plane_payload(&fbuf->vb, 0, pdev->view.size);
+
 	if (pdev->vbandlength == 0) {
 		/* Uncompressed mode.
 		 * We copy the data into the output buffer, using the viewport
diff --git a/drivers/media/video/pwc/pwc-uncompress.h b/drivers/media/video/pwc/pwc-uncompress.h
deleted file mode 100644
index 43028e7..0000000
--- a/drivers/media/video/pwc/pwc-uncompress.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* (C) 1999-2003 Nemosoft Unv.
-   (C) 2004-2006 Luc Saillard (luc@saillard.org)
-
-   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
-   driver and thus may have bugs that are not present in the original version.
-   Please send bug reports and support requests to <luc@saillard.org>.
-   The decompression routines have been implemented by reverse-engineering the
-   Nemosoft binary pwcx module. Caveat emptor.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-/* This file is the bridge between the kernel module and the plugin; it
-   describes the structures and datatypes used in both modules. Any
-   significant change should be reflected by increasing the
-   pwc_decompressor_version major number.
- */
-#ifndef PWC_UNCOMPRESS_H
-#define PWC_UNCOMPRESS_H
-
-
-#include <media/pwc-ioctl.h>
-
-/* from pwc-dec.h */
-#define PWCX_FLAG_PLANAR        0x0001
-/* */
-
-#endif
diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c
index f85c512..e9a0e94 100644
--- a/drivers/media/video/pwc/pwc-v4l.c
+++ b/drivers/media/video/pwc/pwc-v4l.c
@@ -2,6 +2,7 @@
    USB and Video4Linux interface part.
    (C) 1999-2004 Nemosoft Unv.
    (C) 2004-2006 Luc Saillard (luc@saillard.org)
+   (C) 2011 Hans de Goede <hdegoede@redhat.com>
 
    NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
    driver and thus may have bugs that are not present in the original version.
@@ -31,184 +32,330 @@
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/vmalloc.h>
+#include <linux/jiffies.h>
 #include <asm/io.h>
 
 #include "pwc.h"
 
-static struct v4l2_queryctrl pwc_controls[] = {
-	{
-	    .id      = V4L2_CID_BRIGHTNESS,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Brightness",
-	    .minimum = 0,
-	    .maximum = 128,
-	    .step    = 1,
-	    .default_value = 64,
-	},
-	{
-	    .id      = V4L2_CID_CONTRAST,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Contrast",
-	    .minimum = 0,
-	    .maximum = 64,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_SATURATION,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Saturation",
-	    .minimum = -100,
-	    .maximum = 100,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_GAMMA,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Gamma",
-	    .minimum = 0,
-	    .maximum = 32,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_RED_BALANCE,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Red Gain",
-	    .minimum = 0,
-	    .maximum = 256,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_BLUE_BALANCE,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Blue Gain",
-	    .minimum = 0,
-	    .maximum = 256,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_AUTO_WHITE_BALANCE,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Auto White Balance",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_EXPOSURE,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Shutter Speed (Exposure)",
-	    .minimum = 0,
-	    .maximum = 256,
-	    .step    = 1,
-	    .default_value = 200,
-	},
-	{
-	    .id      = V4L2_CID_AUTOGAIN,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Auto Gain Enabled",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 1,
-	},
-	{
-	    .id      = V4L2_CID_GAIN,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Gain Level",
-	    .minimum = 0,
-	    .maximum = 256,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_SAVE_USER,
-	    .type    = V4L2_CTRL_TYPE_BUTTON,
-	    .name    = "Save User Settings",
-	    .minimum = 0,
-	    .maximum = 0,
-	    .step    = 0,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_RESTORE_USER,
-	    .type    = V4L2_CTRL_TYPE_BUTTON,
-	    .name    = "Restore User Settings",
-	    .minimum = 0,
-	    .maximum = 0,
-	    .step    = 0,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_RESTORE_FACTORY,
-	    .type    = V4L2_CTRL_TYPE_BUTTON,
-	    .name    = "Restore Factory Settings",
-	    .minimum = 0,
-	    .maximum = 0,
-	    .step    = 0,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_COLOUR_MODE,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Colour mode",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_AUTOCONTOUR,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Auto contour",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_CONTOUR,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Contour",
-	    .minimum = 0,
-	    .maximum = 63,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_BACKLIGHT,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Backlight compensation",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	  .id      = V4L2_CID_PRIVATE_FLICKERLESS,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Flickerless",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_NOISE_REDUCTION,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Noise reduction",
-	    .minimum = 0,
-	    .maximum = 3,
-	    .step    = 1,
-	    .default_value = 0,
-	},
+#define PWC_CID_CUSTOM(ctrl) ((V4L2_CID_USER_BASE | 0xf000) + custom_ ## ctrl)
+
+static int pwc_g_volatile_ctrl(struct v4l2_ctrl *ctrl);
+static int pwc_s_ctrl(struct v4l2_ctrl *ctrl);
+
+static const struct v4l2_ctrl_ops pwc_ctrl_ops = {
+	.g_volatile_ctrl = pwc_g_volatile_ctrl,
+	.s_ctrl = pwc_s_ctrl,
+};
+
+enum { awb_indoor, awb_outdoor, awb_fl, awb_manual, awb_auto };
+enum { custom_autocontour, custom_contour, custom_noise_reduction,
+	custom_save_user, custom_restore_user, custom_restore_factory };
+
+const char * const pwc_auto_whitebal_qmenu[] = {
+	"Indoor (Incandescant Lighting) Mode",
+	"Outdoor (Sunlight) Mode",
+	"Indoor (Fluorescent Lighting) Mode",
+	"Manual Mode",
+	"Auto Mode",
+	NULL
+};
+
+static const struct v4l2_ctrl_config pwc_auto_white_balance_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= V4L2_CID_AUTO_WHITE_BALANCE,
+	.type	= V4L2_CTRL_TYPE_MENU,
+	.max	= awb_auto,
+	.qmenu	= pwc_auto_whitebal_qmenu,
+};
+
+static const struct v4l2_ctrl_config pwc_autocontour_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(autocontour),
+	.type	= V4L2_CTRL_TYPE_BOOLEAN,
+	.name	= "Auto contour",
+	.min	= 0,
+	.max	= 1,
+	.step	= 1,
+};
+
+static const struct v4l2_ctrl_config pwc_contour_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(contour),
+	.type	= V4L2_CTRL_TYPE_INTEGER,
+	.name	= "Contour",
+	.min	= 0,
+	.max	= 63,
+	.step	= 1,
+};
+
+static const struct v4l2_ctrl_config pwc_backlight_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= V4L2_CID_BACKLIGHT_COMPENSATION,
+	.type	= V4L2_CTRL_TYPE_BOOLEAN,
+	.min	= 0,
+	.max	= 1,
+	.step	= 1,
+};
+
+static const struct v4l2_ctrl_config pwc_flicker_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= V4L2_CID_BAND_STOP_FILTER,
+	.type	= V4L2_CTRL_TYPE_BOOLEAN,
+	.min	= 0,
+	.max	= 1,
+	.step	= 1,
+};
+
+static const struct v4l2_ctrl_config pwc_noise_reduction_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(noise_reduction),
+	.type	= V4L2_CTRL_TYPE_INTEGER,
+	.name	= "Dynamic Noise Reduction",
+	.min	= 0,
+	.max	= 3,
+	.step	= 1,
+};
+
+static const struct v4l2_ctrl_config pwc_save_user_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(save_user),
+	.type	= V4L2_CTRL_TYPE_BUTTON,
+	.name    = "Save User Settings",
 };
 
+static const struct v4l2_ctrl_config pwc_restore_user_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(restore_user),
+	.type	= V4L2_CTRL_TYPE_BUTTON,
+	.name    = "Restore User Settings",
+};
+
+static const struct v4l2_ctrl_config pwc_restore_factory_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(restore_factory),
+	.type	= V4L2_CTRL_TYPE_BUTTON,
+	.name    = "Restore Factory Settings",
+};
+
+int pwc_init_controls(struct pwc_device *pdev)
+{
+	struct v4l2_ctrl_handler *hdl;
+	struct v4l2_ctrl_config cfg;
+	int r, def;
+
+	hdl = &pdev->ctrl_handler;
+	r = v4l2_ctrl_handler_init(hdl, 20);
+	if (r)
+		return r;
+
+	/* Brightness, contrast, saturation, gamma */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, BRIGHTNESS_FORMATTER, &def);
+	if (r || def > 127)
+		def = 63;
+	pdev->brightness = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_BRIGHTNESS, 0, 127, 1, def);
+
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, CONTRAST_FORMATTER, &def);
+	if (r || def > 63)
+		def = 31;
+	pdev->contrast = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_CONTRAST, 0, 63, 1, def);
+
+	if (pdev->type >= 675) {
+		if (pdev->type < 730)
+			pdev->saturation_fmt = SATURATION_MODE_FORMATTER2;
+		else
+			pdev->saturation_fmt = SATURATION_MODE_FORMATTER1;
+		r = pwc_get_s8_ctrl(pdev, GET_CHROM_CTL, pdev->saturation_fmt,
+				    &def);
+		if (r || def < -100 || def > 100)
+			def = 0;
+		pdev->saturation = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				      V4L2_CID_SATURATION, -100, 100, 1, def);
+	}
+
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, GAMMA_FORMATTER, &def);
+	if (r || def > 31)
+		def = 15;
+	pdev->gamma = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_GAMMA, 0, 31, 1, def);
+
+	/* auto white balance, red gain, blue gain */
+	r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL, WB_MODE_FORMATTER, &def);
+	if (r || def > awb_auto)
+		def = awb_auto;
+	cfg = pwc_auto_white_balance_cfg;
+	cfg.name = v4l2_ctrl_get_name(cfg.id);
+	cfg.def = def;
+	pdev->auto_white_balance = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+	/* check auto controls to avoid NULL deref in v4l2_ctrl_auto_cluster */
+	if (!pdev->auto_white_balance)
+		return hdl->error;
+
+	r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL,
+			    PRESET_MANUAL_RED_GAIN_FORMATTER, &def);
+	if (r)
+		def = 127;
+	pdev->red_balance = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_RED_BALANCE, 0, 255, 1, def);
+
+	r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL,
+			    PRESET_MANUAL_BLUE_GAIN_FORMATTER, &def);
+	if (r)
+		def = 127;
+	pdev->blue_balance = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_BLUE_BALANCE, 0, 255, 1, def);
+
+	v4l2_ctrl_auto_cluster(3, &pdev->auto_white_balance, awb_manual,
+			       pdev->auto_white_balance->cur.val == awb_auto);
+
+	/* autogain, gain */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, AGC_MODE_FORMATTER, &def);
+	if (r || (def != 0 && def != 0xff))
+		def = 0;
+	/* Note a register value if 0 means auto gain is on */
+	pdev->autogain = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_AUTOGAIN, 0, 1, 1, def == 0);
+	if (!pdev->autogain)
+		return hdl->error;
+
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, PRESET_AGC_FORMATTER, &def);
+	if (r || def > 63)
+		def = 31;
+	pdev->gain = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_GAIN, 0, 63, 1, def);
+
+	/* auto exposure, exposure */
+	if (DEVICE_USE_CODEC2(pdev->type)) {
+		r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, SHUTTER_MODE_FORMATTER,
+				    &def);
+		if (r || (def != 0 && def != 0xff))
+			def = 0;
+		/*
+		 * def = 0 auto, def = ff manual
+		 * menu idx 0 = auto, idx 1 = manual
+		 */
+		pdev->exposure_auto = v4l2_ctrl_new_std_menu(hdl,
+					&pwc_ctrl_ops,
+					V4L2_CID_EXPOSURE_AUTO,
+					1, 0, def != 0);
+		if (!pdev->exposure_auto)
+			return hdl->error;
+
+		/* GET_LUM_CTL, PRESET_SHUTTER_FORMATTER is unreliable */
+		r = pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
+				     READ_SHUTTER_FORMATTER, &def);
+		if (r || def > 655)
+			def = 655;
+		pdev->exposure = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+					V4L2_CID_EXPOSURE, 0, 655, 1, def);
+		/* CODEC2: separate auto gain & auto exposure */
+		v4l2_ctrl_auto_cluster(2, &pdev->autogain, 0, true);
+		v4l2_ctrl_auto_cluster(2, &pdev->exposure_auto,
+				       V4L2_EXPOSURE_MANUAL, true);
+	} else if (DEVICE_USE_CODEC3(pdev->type)) {
+		/* GET_LUM_CTL, PRESET_SHUTTER_FORMATTER is unreliable */
+		r = pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
+				     READ_SHUTTER_FORMATTER, &def);
+		if (r || def > 255)
+			def = 255;
+		pdev->exposure = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+					V4L2_CID_EXPOSURE, 0, 255, 1, def);
+		/* CODEC3: both gain and exposure controlled by autogain */
+		pdev->autogain_expo_cluster[0] = pdev->autogain;
+		pdev->autogain_expo_cluster[1] = pdev->gain;
+		pdev->autogain_expo_cluster[2] = pdev->exposure;
+		v4l2_ctrl_auto_cluster(3, pdev->autogain_expo_cluster,
+				       0, true);
+	}
+
+	/* color / bw setting */
+	r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL, COLOUR_MODE_FORMATTER,
+			 &def);
+	if (r || (def != 0 && def != 0xff))
+		def = 0xff;
+	/* def = 0 bw, def = ff color, menu idx 0 = color, idx 1 = bw */
+	pdev->colorfx = v4l2_ctrl_new_std_menu(hdl, &pwc_ctrl_ops,
+				V4L2_CID_COLORFX, 1, 0, def == 0);
+
+	/* autocontour, contour */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &def);
+	if (r || (def != 0 && def != 0xff))
+		def = 0;
+	cfg = pwc_autocontour_cfg;
+	cfg.def = def == 0;
+	pdev->autocontour = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+	if (!pdev->autocontour)
+		return hdl->error;
+
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &def);
+	if (r || def > 63)
+		def = 31;
+	cfg = pwc_contour_cfg;
+	cfg.def = def;
+	pdev->contour = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+
+	v4l2_ctrl_auto_cluster(2, &pdev->autocontour, 0, false);
+
+	/* backlight */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL,
+			    BACK_LIGHT_COMPENSATION_FORMATTER, &def);
+	if (r || (def != 0 && def != 0xff))
+		def = 0;
+	cfg = pwc_backlight_cfg;
+	cfg.name = v4l2_ctrl_get_name(cfg.id);
+	cfg.def = def == 0;
+	pdev->backlight = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+
+	/* flikker rediction */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL,
+			    FLICKERLESS_MODE_FORMATTER, &def);
+	if (r || (def != 0 && def != 0xff))
+		def = 0;
+	cfg = pwc_flicker_cfg;
+	cfg.name = v4l2_ctrl_get_name(cfg.id);
+	cfg.def = def == 0;
+	pdev->flicker = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+
+	/* Dynamic noise reduction */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL,
+			    DYNAMIC_NOISE_CONTROL_FORMATTER, &def);
+	if (r || def > 3)
+		def = 2;
+	cfg = pwc_noise_reduction_cfg;
+	cfg.def = def;
+	pdev->noise_reduction = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+
+	/* Save / Restore User / Factory Settings */
+	pdev->save_user = v4l2_ctrl_new_custom(hdl, &pwc_save_user_cfg, NULL);
+	pdev->restore_user = v4l2_ctrl_new_custom(hdl, &pwc_restore_user_cfg,
+						  NULL);
+	if (pdev->restore_user)
+		pdev->restore_user->flags = V4L2_CTRL_FLAG_UPDATE;
+	pdev->restore_factory = v4l2_ctrl_new_custom(hdl,
+						     &pwc_restore_factory_cfg,
+						     NULL);
+	if (pdev->restore_factory)
+		pdev->restore_factory->flags = V4L2_CTRL_FLAG_UPDATE;
+
+	if (!pdev->features & FEATURE_MOTOR_PANTILT)
+		return hdl->error;
+
+	/* Motor pan / tilt / reset */
+	pdev->motor_pan = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_PAN_RELATIVE, -4480, 4480, 64, 0);
+	if (!pdev->motor_pan)
+		return hdl->error;
+	pdev->motor_tilt = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_TILT_RELATIVE, -1920, 1920, 64, 0);
+	pdev->motor_pan_reset = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_PAN_RESET, 0, 0, 0, 0);
+	pdev->motor_tilt_reset = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_TILT_RESET, 0, 0, 0, 0);
+	v4l2_ctrl_cluster(4, &pdev->motor_pan);
+
+	return hdl->error;
+}
 
 static void pwc_vidioc_fill_fmt(const struct pwc_device *pdev, struct v4l2_format *f)
 {
@@ -284,10 +431,21 @@ static int pwc_vidioc_try_fmt(struct pwc_device *pdev, struct v4l2_format *f)
 }
 
 /* ioctl(VIDIOC_SET_FMT) */
-static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f)
+
+static int pwc_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
 {
+	struct pwc_device *pdev = video_drvdata(file);
 	int ret, fps, snapshot, compression, pixelformat;
 
+	if (!pdev->udev)
+		return -ENODEV;
+
+	if (pdev->capt_file != NULL &&
+	    pdev->capt_file != file)
+		return -EBUSY;
+
+	pdev->capt_file = file;
+
 	ret = pwc_vidioc_try_fmt(pdev, f);
 	if (ret<0)
 		return ret;
@@ -309,7 +467,7 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f)
 	    pixelformat != V4L2_PIX_FMT_PWC2)
 		return -EINVAL;
 
-	if (pdev->iso_init)
+	if (vb2_is_streaming(&pdev->vb_queue))
 		return -EBUSY;
 
 	PWC_DEBUG_IOCTL("Trying to set format to: width=%d height=%d fps=%d "
@@ -343,13 +501,14 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f)
 
 static int pwc_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
 {
-	struct video_device *vdev = video_devdata(file);
 	struct pwc_device *pdev = video_drvdata(file);
 
+	if (!pdev->udev)
+		return -ENODEV;
+
 	strcpy(cap->driver, PWC_NAME);
-	strlcpy(cap->card, vdev->name, sizeof(cap->card));
+	strlcpy(cap->card, pdev->vdev.name, sizeof(cap->card));
 	usb_make_path(pdev->udev, cap->bus_info, sizeof(cap->bus_info));
-	cap->version = PWC_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE	|
 		V4L2_CAP_STREAMING	|
@@ -377,255 +536,396 @@ static int pwc_s_input(struct file *file, void *fh, unsigned int i)
 	return i ? -EINVAL : 0;
 }
 
-static int pwc_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *c)
+static int pwc_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 {
-	int i, idx;
-	u32 id;
-
-	id = c->id;
-	if (id & V4L2_CTRL_FLAG_NEXT_CTRL) {
-		id &= V4L2_CTRL_ID_MASK;
-		id++;
-		idx = -1;
-		for (i = 0; i < ARRAY_SIZE(pwc_controls); i++) {
-			if (pwc_controls[i].id < id)
-				continue;
-			if (idx >= 0
-			 && pwc_controls[i].id > pwc_controls[idx].id)
-				continue;
-			idx = i;
+	struct pwc_device *pdev =
+		container_of(ctrl->handler, struct pwc_device, ctrl_handler);
+	int ret = 0;
+
+	/*
+	 * Sometimes it can take quite long for the pwc to complete usb control
+	 * transfers, so release the modlock to give streaming by another
+	 * process / thread the chance to continue with a dqbuf.
+	 */
+	mutex_unlock(&pdev->modlock);
+
+	/*
+	 * Take the udev-lock to protect against the disconnect handler
+	 * completing and setting dev->udev to NULL underneath us. Other code
+	 * does not need to do this since it is protected by the modlock.
+	 */
+	mutex_lock(&pdev->udevlock);
+
+	if (!pdev->udev) {
+		ret = -ENODEV;
+		goto leave;
+	}
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		if (pdev->color_bal_valid && time_before(jiffies,
+				pdev->last_color_bal_update + HZ / 4)) {
+			pdev->red_balance->val  = pdev->last_red_balance;
+			pdev->blue_balance->val = pdev->last_blue_balance;
+			break;
 		}
-		if (idx < 0)
-			return -EINVAL;
-		memcpy(c, &pwc_controls[idx], sizeof pwc_controls[0]);
-		return 0;
+		ret = pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+				      READ_RED_GAIN_FORMATTER,
+				      &pdev->red_balance->val);
+		if (ret)
+			break;
+		ret = pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+				      READ_BLUE_GAIN_FORMATTER,
+				      &pdev->blue_balance->val);
+		if (ret)
+			break;
+		pdev->last_red_balance  = pdev->red_balance->val;
+		pdev->last_blue_balance = pdev->blue_balance->val;
+		pdev->last_color_bal_update = jiffies;
+		pdev->color_bal_valid = true;
+		break;
+	case V4L2_CID_AUTOGAIN:
+		if (pdev->gain_valid && time_before(jiffies,
+				pdev->last_gain_update + HZ / 4)) {
+			pdev->gain->val = pdev->last_gain;
+			break;
+		}
+		ret = pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+				      READ_AGC_FORMATTER, &pdev->gain->val);
+		if (ret)
+			break;
+		pdev->last_gain = pdev->gain->val;
+		pdev->last_gain_update = jiffies;
+		pdev->gain_valid = true;
+		if (!DEVICE_USE_CODEC3(pdev->type))
+			break;
+		/* Fall through for CODEC3 where autogain also controls expo */
+	case V4L2_CID_EXPOSURE_AUTO:
+		if (pdev->exposure_valid && time_before(jiffies,
+				pdev->last_exposure_update + HZ / 4)) {
+			pdev->exposure->val = pdev->last_exposure;
+			break;
+		}
+		ret = pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
+				       READ_SHUTTER_FORMATTER,
+				       &pdev->exposure->val);
+		if (ret)
+			break;
+		pdev->last_exposure = pdev->exposure->val;
+		pdev->last_exposure_update = jiffies;
+		pdev->exposure_valid = true;
+		break;
+	default:
+		ret = -EINVAL;
 	}
-	for (i = 0; i < sizeof(pwc_controls) / sizeof(struct v4l2_queryctrl); i++) {
-		if (pwc_controls[i].id == c->id) {
-			PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYCTRL) found\n");
-			memcpy(c, &pwc_controls[i], sizeof(struct v4l2_queryctrl));
-			return 0;
+
+	if (ret)
+		PWC_ERROR("g_ctrl %s error %d\n", ctrl->name, ret);
+
+leave:
+	mutex_unlock(&pdev->udevlock);
+	mutex_lock(&pdev->modlock);
+	return ret;
+}
+
+static int pwc_set_awb(struct pwc_device *pdev)
+{
+	int ret = 0;
+
+	if (pdev->auto_white_balance->is_new) {
+		ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL,
+				      WB_MODE_FORMATTER,
+				      pdev->auto_white_balance->val);
+		if (ret)
+			return ret;
+
+		/* Update val when coming from auto or going to a preset */
+		if (pdev->red_balance->is_volatile ||
+		    pdev->auto_white_balance->val == awb_indoor ||
+		    pdev->auto_white_balance->val == awb_outdoor ||
+		    pdev->auto_white_balance->val == awb_fl) {
+			if (!pdev->red_balance->is_new)
+				pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+					READ_RED_GAIN_FORMATTER,
+					&pdev->red_balance->val);
+			if (!pdev->blue_balance->is_new)
+				pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+					READ_BLUE_GAIN_FORMATTER,
+					&pdev->blue_balance->val);
+		}
+		if (pdev->auto_white_balance->val == awb_auto) {
+			pdev->red_balance->is_volatile = true;
+			pdev->blue_balance->is_volatile = true;
+			pdev->color_bal_valid = false; /* Force cache update */
+		} else {
+			pdev->red_balance->is_volatile = false;
+			pdev->blue_balance->is_volatile = false;
 		}
 	}
-	return -EINVAL;
+
+	if (ret == 0 && pdev->red_balance->is_new) {
+		if (pdev->auto_white_balance->val != awb_manual)
+			return -EBUSY;
+		ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL,
+				      PRESET_MANUAL_RED_GAIN_FORMATTER,
+				      pdev->red_balance->val);
+	}
+
+	if (ret == 0 && pdev->blue_balance->is_new) {
+		if (pdev->auto_white_balance->val != awb_manual)
+			return -EBUSY;
+		ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL,
+				      PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+				      pdev->blue_balance->val);
+	}
+	return ret;
 }
 
-static int pwc_g_ctrl(struct file *file, void *fh, struct v4l2_control *c)
+/* For CODEC2 models which have separate autogain and auto exposure */
+static int pwc_set_autogain(struct pwc_device *pdev)
 {
-	struct pwc_device *pdev = video_drvdata(file);
-	int ret;
+	int ret = 0;
+
+	if (pdev->autogain->is_new) {
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      AGC_MODE_FORMATTER,
+				      pdev->autogain->val ? 0 : 0xff);
+		if (ret)
+			return ret;
+		if (pdev->autogain->val)
+			pdev->gain_valid = false; /* Force cache update */
+		else if (!pdev->gain->is_new)
+			pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+					READ_AGC_FORMATTER,
+					&pdev->gain->val);
+	}
+	if (ret == 0 && pdev->gain->is_new) {
+		if (pdev->autogain->val)
+			return -EBUSY;
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      PRESET_AGC_FORMATTER,
+				      pdev->gain->val);
+	}
+	return ret;
+}
 
-	switch (c->id) {
-	case V4L2_CID_BRIGHTNESS:
-		c->value = pwc_get_brightness(pdev);
-		if (c->value < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_CONTRAST:
-		c->value = pwc_get_contrast(pdev);
-		if (c->value < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_SATURATION:
-		ret = pwc_get_saturation(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_GAMMA:
-		c->value = pwc_get_gamma(pdev);
-		if (c->value < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_RED_BALANCE:
-		ret = pwc_get_red_gain(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value >>= 8;
-		return 0;
-	case V4L2_CID_BLUE_BALANCE:
-		ret = pwc_get_blue_gain(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value >>= 8;
-		return 0;
-	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ret = pwc_get_awb(pdev);
-		if (ret < 0)
-			return -EINVAL;
-		c->value = (ret == PWC_WB_MANUAL) ? 0 : 1;
-		return 0;
-	case V4L2_CID_GAIN:
-		ret = pwc_get_agc(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value >>= 8;
-		return 0;
-	case V4L2_CID_AUTOGAIN:
-		ret = pwc_get_agc(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value = (c->value < 0) ? 1 : 0;
-		return 0;
-	case V4L2_CID_EXPOSURE:
-		ret = pwc_get_shutter_speed(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_COLOUR_MODE:
-		ret = pwc_get_colour_mode(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_AUTOCONTOUR:
-		ret = pwc_get_contour(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value = (c->value == -1 ? 1 : 0);
-		return 0;
-	case V4L2_CID_PRIVATE_CONTOUR:
-		ret = pwc_get_contour(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value >>= 10;
-		return 0;
-	case V4L2_CID_PRIVATE_BACKLIGHT:
-		ret = pwc_get_backlight(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_FLICKERLESS:
-		ret = pwc_get_flicker(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value = (c->value ? 1 : 0);
-		return 0;
-	case V4L2_CID_PRIVATE_NOISE_REDUCTION:
-		ret = pwc_get_dynamic_noise(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
+/* For CODEC2 models which have separate autogain and auto exposure */
+static int pwc_set_exposure_auto(struct pwc_device *pdev)
+{
+	int ret = 0;
+	int is_auto = pdev->exposure_auto->val == V4L2_EXPOSURE_AUTO;
+
+	if (pdev->exposure_auto->is_new) {
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      SHUTTER_MODE_FORMATTER,
+				      is_auto ? 0 : 0xff);
+		if (ret)
+			return ret;
+		if (is_auto)
+			pdev->exposure_valid = false; /* Force cache update */
+		else if (!pdev->exposure->is_new)
+			pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
+					 READ_SHUTTER_FORMATTER,
+					 &pdev->exposure->val);
+	}
+	if (ret == 0 && pdev->exposure->is_new) {
+		if (is_auto)
+			return -EBUSY;
+		ret = pwc_set_u16_ctrl(pdev, SET_LUM_CTL,
+				       PRESET_SHUTTER_FORMATTER,
+				       pdev->exposure->val);
+	}
+	return ret;
+}
 
-	case V4L2_CID_PRIVATE_SAVE_USER:
-	case V4L2_CID_PRIVATE_RESTORE_USER:
-	case V4L2_CID_PRIVATE_RESTORE_FACTORY:
-		return -EINVAL;
+/* For CODEC3 models which have autogain controlling both gain and exposure */
+static int pwc_set_autogain_expo(struct pwc_device *pdev)
+{
+	int ret = 0;
+
+	if (pdev->autogain->is_new) {
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      AGC_MODE_FORMATTER,
+				      pdev->autogain->val ? 0 : 0xff);
+		if (ret)
+			return ret;
+		if (pdev->autogain->val) {
+			pdev->gain_valid     = false; /* Force cache update */
+			pdev->exposure_valid = false; /* Force cache update */
+		} else {
+			if (!pdev->gain->is_new)
+				pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+						READ_AGC_FORMATTER,
+						&pdev->gain->val);
+			if (!pdev->exposure->is_new)
+				pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
+						 READ_SHUTTER_FORMATTER,
+						 &pdev->exposure->val);
+		}
 	}
-	return -EINVAL;
+	if (ret == 0 && pdev->gain->is_new) {
+		if (pdev->autogain->val)
+			return -EBUSY;
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      PRESET_AGC_FORMATTER,
+				      pdev->gain->val);
+	}
+	if (ret == 0 && pdev->exposure->is_new) {
+		if (pdev->autogain->val)
+			return -EBUSY;
+		ret = pwc_set_u16_ctrl(pdev, SET_LUM_CTL,
+				       PRESET_SHUTTER_FORMATTER,
+				       pdev->exposure->val);
+	}
+	return ret;
 }
 
-static int pwc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c)
+static int pwc_set_motor(struct pwc_device *pdev)
 {
-	struct pwc_device *pdev = video_drvdata(file);
 	int ret;
+	u8 buf[4];
+
+	buf[0] = 0;
+	if (pdev->motor_pan_reset->is_new)
+		buf[0] |= 0x01;
+	if (pdev->motor_tilt_reset->is_new)
+		buf[0] |= 0x02;
+	if (pdev->motor_pan_reset->is_new || pdev->motor_tilt_reset->is_new) {
+		ret = send_control_msg(pdev, SET_MPT_CTL,
+				       PT_RESET_CONTROL_FORMATTER, buf, 1);
+		if (ret < 0)
+			return ret;
+	}
 
-	switch (c->id) {
-	case V4L2_CID_BRIGHTNESS:
-		c->value <<= 9;
-		ret = pwc_set_brightness(pdev, c->value);
+	memset(buf, 0, sizeof(buf));
+	if (pdev->motor_pan->is_new) {
+		buf[0] = pdev->motor_pan->val & 0xFF;
+		buf[1] = (pdev->motor_pan->val >> 8);
+	}
+	if (pdev->motor_tilt->is_new) {
+		buf[2] = pdev->motor_tilt->val & 0xFF;
+		buf[3] = (pdev->motor_tilt->val >> 8);
+	}
+	if (pdev->motor_pan->is_new || pdev->motor_tilt->is_new) {
+		ret = send_control_msg(pdev, SET_MPT_CTL,
+				       PT_RELATIVE_CONTROL_FORMATTER,
+				       buf, sizeof(buf));
 		if (ret < 0)
-			return -EINVAL;
-		return 0;
+			return ret;
+	}
+
+	return 0;
+}
+
+static int pwc_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct pwc_device *pdev =
+		container_of(ctrl->handler, struct pwc_device, ctrl_handler);
+	int ret = 0;
+
+	/* See the comments on locking in pwc_g_volatile_ctrl */
+	mutex_unlock(&pdev->modlock);
+	mutex_lock(&pdev->udevlock);
+
+	if (!pdev->udev) {
+		ret = -ENODEV;
+		goto leave;
+	}
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      BRIGHTNESS_FORMATTER, ctrl->val);
+		break;
 	case V4L2_CID_CONTRAST:
-		c->value <<= 10;
-		ret = pwc_set_contrast(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      CONTRAST_FORMATTER, ctrl->val);
+		break;
 	case V4L2_CID_SATURATION:
-		ret = pwc_set_saturation(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
+		ret = pwc_set_s8_ctrl(pdev, SET_CHROM_CTL,
+				      pdev->saturation_fmt, ctrl->val);
+		break;
 	case V4L2_CID_GAMMA:
-		c->value <<= 11;
-		ret = pwc_set_gamma(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_RED_BALANCE:
-		c->value <<= 8;
-		ret = pwc_set_red_gain(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_BLUE_BALANCE:
-		c->value <<= 8;
-		ret = pwc_set_blue_gain(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      GAMMA_FORMATTER, ctrl->val);
+		break;
 	case V4L2_CID_AUTO_WHITE_BALANCE:
-		c->value = (c->value == 0) ? PWC_WB_MANUAL : PWC_WB_AUTO;
-		ret = pwc_set_awb(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_EXPOSURE:
-		c->value <<= 8;
-		ret = pwc_set_shutter_speed(pdev, c->value ? 0 : 1, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
+		ret = pwc_set_awb(pdev);
+		break;
 	case V4L2_CID_AUTOGAIN:
-		/* autogain off means nothing without a gain */
-		if (c->value == 0)
-			return 0;
-		ret = pwc_set_agc(pdev, c->value, 0);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_GAIN:
-		c->value <<= 8;
-		ret = pwc_set_agc(pdev, 0, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_SAVE_USER:
-		if (pwc_save_user(pdev))
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_RESTORE_USER:
-		if (pwc_restore_user(pdev))
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_RESTORE_FACTORY:
-		if (pwc_restore_factory(pdev))
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_COLOUR_MODE:
-		ret = pwc_set_colour_mode(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_AUTOCONTOUR:
-		c->value = (c->value == 1) ? -1 : 0;
-		ret = pwc_set_contour(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_CONTOUR:
-		c->value <<= 10;
-		ret = pwc_set_contour(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_BACKLIGHT:
-		ret = pwc_set_backlight(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_FLICKERLESS:
-		ret = pwc_set_flicker(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-	case V4L2_CID_PRIVATE_NOISE_REDUCTION:
-		ret = pwc_set_dynamic_noise(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-
+		if (DEVICE_USE_CODEC2(pdev->type))
+			ret = pwc_set_autogain(pdev);
+		else if (DEVICE_USE_CODEC3(pdev->type))
+			ret = pwc_set_autogain_expo(pdev);
+		else
+			ret = -EINVAL;
+		break;
+	case V4L2_CID_EXPOSURE_AUTO:
+		if (DEVICE_USE_CODEC2(pdev->type))
+			ret = pwc_set_exposure_auto(pdev);
+		else
+			ret = -EINVAL;
+		break;
+	case V4L2_CID_COLORFX:
+		ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL,
+				      COLOUR_MODE_FORMATTER,
+				      ctrl->val ? 0 : 0xff);
+		break;
+	case PWC_CID_CUSTOM(autocontour):
+		if (pdev->autocontour->is_new) {
+			ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+					AUTO_CONTOUR_FORMATTER,
+					pdev->autocontour->val ? 0 : 0xff);
+		}
+		if (ret == 0 && pdev->contour->is_new) {
+			if (pdev->autocontour->val) {
+				ret = -EBUSY;
+				break;
+			}
+			ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+					      PRESET_CONTOUR_FORMATTER,
+					      pdev->contour->val);
+		}
+		break;
+	case V4L2_CID_BACKLIGHT_COMPENSATION:
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      BACK_LIGHT_COMPENSATION_FORMATTER,
+				      ctrl->val ? 0 : 0xff);
+		break;
+	case V4L2_CID_BAND_STOP_FILTER:
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      FLICKERLESS_MODE_FORMATTER,
+				      ctrl->val ? 0 : 0xff);
+		break;
+	case PWC_CID_CUSTOM(noise_reduction):
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      DYNAMIC_NOISE_CONTROL_FORMATTER,
+				      ctrl->val);
+		break;
+	case PWC_CID_CUSTOM(save_user):
+		ret = pwc_button_ctrl(pdev, SAVE_USER_DEFAULTS_FORMATTER);
+		break;
+	case PWC_CID_CUSTOM(restore_user):
+		ret = pwc_button_ctrl(pdev, RESTORE_USER_DEFAULTS_FORMATTER);
+		break;
+	case PWC_CID_CUSTOM(restore_factory):
+		ret = pwc_button_ctrl(pdev,
+				      RESTORE_FACTORY_DEFAULTS_FORMATTER);
+		break;
+	case V4L2_CID_PAN_RELATIVE:
+		ret = pwc_set_motor(pdev);
+		break;
+	default:
+		ret = -EINVAL;
 	}
-	return -EINVAL;
+
+	if (ret)
+		PWC_ERROR("s_ctrl %s error %d\n", ctrl->name, ret);
+
+leave:
+	mutex_unlock(&pdev->udevlock);
+	mutex_lock(&pdev->modlock);
+	return ret;
 }
 
 static int pwc_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f)
@@ -667,157 +967,77 @@ static int pwc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *
 	return pwc_vidioc_try_fmt(pdev, f);
 }
 
-static int pwc_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
+static int pwc_reqbufs(struct file *file, void *fh,
+		       struct v4l2_requestbuffers *rb)
 {
 	struct pwc_device *pdev = video_drvdata(file);
 
-	return pwc_vidioc_set_fmt(pdev, f);
-}
-
-static int pwc_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *rb)
-{
-	int nbuffers;
+	if (pdev->capt_file != NULL &&
+	    pdev->capt_file != file)
+		return -EBUSY;
 
-	PWC_DEBUG_IOCTL("ioctl(VIDIOC_REQBUFS) count=%d\n", rb->count);
-	if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (rb->memory != V4L2_MEMORY_MMAP)
-		return -EINVAL;
+	pdev->capt_file = file;
 
-	nbuffers = rb->count;
-	if (nbuffers < 2)
-		nbuffers = 2;
-	else if (nbuffers > pwc_mbufs)
-		nbuffers = pwc_mbufs;
-	/* Force to use our # of buffers */
-	rb->count = pwc_mbufs;
-	return 0;
+	return vb2_reqbufs(&pdev->vb_queue, rb);
 }
 
 static int pwc_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 {
 	struct pwc_device *pdev = video_drvdata(file);
-	int index;
 
-	PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) index=%d\n", buf->index);
-	if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad type\n");
-		return -EINVAL;
-	}
-	index = buf->index;
-	if (index < 0 || index >= pwc_mbufs) {
-		PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad index %d\n", buf->index);
-		return -EINVAL;
-	}
-
-	buf->m.offset = index * pdev->len_per_image;
-	if (pdev->pixfmt != V4L2_PIX_FMT_YUV420)
-		buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame);
-	else
-		buf->bytesused = pdev->view.size;
-	buf->field = V4L2_FIELD_NONE;
-	buf->memory = V4L2_MEMORY_MMAP;
-	/*buf->flags = V4L2_BUF_FLAG_MAPPED;*/
-	buf->length = pdev->len_per_image;
-
-	PWC_DEBUG_READ("VIDIOC_QUERYBUF: index=%d\n", buf->index);
-	PWC_DEBUG_READ("VIDIOC_QUERYBUF: m.offset=%d\n", buf->m.offset);
-	PWC_DEBUG_READ("VIDIOC_QUERYBUF: bytesused=%d\n", buf->bytesused);
-
-	return 0;
+	return vb2_querybuf(&pdev->vb_queue, buf);
 }
 
 static int pwc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 {
-	PWC_DEBUG_IOCTL("ioctl(VIDIOC_QBUF) index=%d\n", buf->index);
-	if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (buf->memory != V4L2_MEMORY_MMAP)
-		return -EINVAL;
-	if (buf->index >= pwc_mbufs)
-		return -EINVAL;
+	struct pwc_device *pdev = video_drvdata(file);
 
-	buf->flags |= V4L2_BUF_FLAG_QUEUED;
-	buf->flags &= ~V4L2_BUF_FLAG_DONE;
+	if (!pdev->udev)
+		return -ENODEV;
 
-	return 0;
+	if (pdev->capt_file != file)
+		return -EBUSY;
+
+	return vb2_qbuf(&pdev->vb_queue, buf);
 }
 
 static int pwc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 {
-	DECLARE_WAITQUEUE(wait, current);
 	struct pwc_device *pdev = video_drvdata(file);
-	int ret;
 
-	PWC_DEBUG_IOCTL("ioctl(VIDIOC_DQBUF)\n");
+	if (!pdev->udev)
+		return -ENODEV;
 
-	if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	add_wait_queue(&pdev->frameq, &wait);
-	while (pdev->full_frames == NULL) {
-		if (pdev->error_status) {
-			remove_wait_queue(&pdev->frameq, &wait);
-			set_current_state(TASK_RUNNING);
-			return -pdev->error_status;
-		}
-
-		if (signal_pending(current)) {
-			remove_wait_queue(&pdev->frameq, &wait);
-			set_current_state(TASK_RUNNING);
-			return -ERESTARTSYS;
-		}
-		mutex_unlock(&pdev->modlock);
-		schedule();
-		set_current_state(TASK_INTERRUPTIBLE);
-		mutex_lock(&pdev->modlock);
-	}
-	remove_wait_queue(&pdev->frameq, &wait);
-	set_current_state(TASK_RUNNING);
-
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: frame ready.\n");
-	/* Decompress data in pdev->images[pdev->fill_image] */
-	ret = pwc_handle_frame(pdev);
-	if (ret)
-		return -EFAULT;
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: after pwc_handle_frame\n");
-
-	buf->index = pdev->fill_image;
-	if (pdev->pixfmt != V4L2_PIX_FMT_YUV420)
-		buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame);
-	else
-		buf->bytesused = pdev->view.size;
-	buf->flags = V4L2_BUF_FLAG_MAPPED;
-	buf->field = V4L2_FIELD_NONE;
-	do_gettimeofday(&buf->timestamp);
-	buf->sequence = 0;
-	buf->memory = V4L2_MEMORY_MMAP;
-	buf->m.offset = pdev->fill_image * pdev->len_per_image;
-	buf->length = pdev->len_per_image;
-	pwc_next_image(pdev);
-
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->index=%d\n", buf->index);
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->length=%d\n", buf->length);
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: m.offset=%d\n", buf->m.offset);
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: bytesused=%d\n", buf->bytesused);
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: leaving\n");
-	return 0;
+	if (pdev->capt_file != file)
+		return -EBUSY;
 
+	return vb2_dqbuf(&pdev->vb_queue, buf, file->f_flags & O_NONBLOCK);
 }
 
 static int pwc_streamon(struct file *file, void *fh, enum v4l2_buf_type i)
 {
 	struct pwc_device *pdev = video_drvdata(file);
 
-	return pwc_isoc_init(pdev);
+	if (!pdev->udev)
+		return -ENODEV;
+
+	if (pdev->capt_file != file)
+		return -EBUSY;
+
+	return vb2_streamon(&pdev->vb_queue, i);
 }
 
 static int pwc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i)
 {
 	struct pwc_device *pdev = video_drvdata(file);
 
-	pwc_isoc_cleanup(pdev);
-	return 0;
+	if (!pdev->udev)
+		return -ENODEV;
+
+	if (pdev->capt_file != file)
+		return -EBUSY;
+
+	return vb2_streamoff(&pdev->vb_queue, i);
 }
 
 static int pwc_enum_framesizes(struct file *file, void *fh,
@@ -896,9 +1116,6 @@ const struct v4l2_ioctl_ops pwc_ioctl_ops = {
 	.vidioc_g_fmt_vid_cap		    = pwc_g_fmt_vid_cap,
 	.vidioc_s_fmt_vid_cap		    = pwc_s_fmt_vid_cap,
 	.vidioc_try_fmt_vid_cap		    = pwc_try_fmt_vid_cap,
-	.vidioc_queryctrl		    = pwc_queryctrl,
-	.vidioc_g_ctrl			    = pwc_g_ctrl,
-	.vidioc_s_ctrl			    = pwc_s_ctrl,
 	.vidioc_reqbufs			    = pwc_reqbufs,
 	.vidioc_querybuf		    = pwc_querybuf,
 	.vidioc_qbuf			    = pwc_qbuf,
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 083f8b1..0e4e2d7 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -29,7 +29,6 @@
 #include <linux/usb.h>
 #include <linux/spinlock.h>
 #include <linux/wait.h>
-#include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
@@ -37,19 +36,16 @@
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/videobuf2-vmalloc.h>
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
 #include <linux/input.h>
 #endif
 
-#include "pwc-uncompress.h"
 #include <media/pwc-ioctl.h>
 
 /* Version block */
-#define PWC_MAJOR	10
-#define PWC_MINOR	0
-#define PWC_EXTRAMINOR	12
-#define PWC_VERSION_CODE KERNEL_VERSION(PWC_MAJOR,PWC_MINOR,PWC_EXTRAMINOR)
-#define PWC_VERSION	"10.0.14"
+#define PWC_VERSION	"10.0.15"
 #define PWC_NAME 	"pwc"
 #define PFX		PWC_NAME ": "
 
@@ -81,9 +77,9 @@
 #define PWC_DEBUG_LEVEL	(PWC_DEBUG_LEVEL_MODULE)
 
 #define PWC_DEBUG(level, fmt, args...) do {\
-	  if ((PWC_DEBUG_LEVEL_ ##level) & pwc_trace) \
-	     printk(KERN_DEBUG PFX fmt, ##args); \
-	  } while(0)
+	if ((PWC_DEBUG_LEVEL_ ##level) & pwc_trace) \
+		printk(KERN_DEBUG PFX fmt, ##args); \
+	} while (0)
 
 #define PWC_ERROR(fmt, args...) printk(KERN_ERR PFX fmt, ##args)
 #define PWC_WARNING(fmt, args...) printk(KERN_WARNING PFX fmt, ##args)
@@ -110,25 +106,21 @@
 #define FEATURE_CODEC1			0x0002
 #define FEATURE_CODEC2			0x0004
 
-/* Turn certain features on/off */
-#define PWC_INT_PIPE 0
-
 /* Ignore errors in the first N frames, to allow for startup delays */
 #define FRAME_LOWMARK 5
 
 /* Size and number of buffers for the ISO pipe. */
-#define MAX_ISO_BUFS		2
+#define MAX_ISO_BUFS		3
 #define ISO_FRAMES_PER_DESC	10
 #define ISO_MAX_FRAME_SIZE	960
 #define ISO_BUFFER_SIZE 	(ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE)
 
-/* Frame buffers: contains compressed or uncompressed video data. */
-#define MAX_FRAMES		5
 /* Maximum size after decompression is 640x480 YUV data, 1.5 * 640 * 480 */
 #define PWC_FRAME_SIZE 		(460800 + TOUCAM_HEADER_SIZE + TOUCAM_TRAILER_SIZE)
 
-/* Absolute maximum number of buffers available for mmap() */
-#define MAX_IMAGES 		10
+/* Absolute minimum and maximum number of buffers available for mmap() */
+#define MIN_FRAMES		2
+#define MAX_FRAMES		16
 
 /* Some macros to quickly find the type of a webcam */
 #define DEVICE_USE_CODEC1(x) ((x)<675)
@@ -136,149 +128,221 @@
 #define DEVICE_USE_CODEC3(x) ((x)>=700)
 #define DEVICE_USE_CODEC23(x) ((x)>=675)
 
-/* The following structures were based on cpia.h. Why reinvent the wheel? :-) */
-struct pwc_iso_buf
-{
-	void *data;
-	int  length;
-	int  read;
-	struct urb *urb;
-};
+/* from pwc-dec.h */
+#define PWCX_FLAG_PLANAR        0x0001
+
+/* Request types: video */
+#define SET_LUM_CTL			0x01
+#define GET_LUM_CTL			0x02
+#define SET_CHROM_CTL			0x03
+#define GET_CHROM_CTL			0x04
+#define SET_STATUS_CTL			0x05
+#define GET_STATUS_CTL			0x06
+#define SET_EP_STREAM_CTL		0x07
+#define GET_EP_STREAM_CTL		0x08
+#define GET_XX_CTL			0x09
+#define SET_XX_CTL			0x0A
+#define GET_XY_CTL			0x0B
+#define SET_XY_CTL			0x0C
+#define SET_MPT_CTL			0x0D
+#define GET_MPT_CTL			0x0E
+
+/* Selectors for the Luminance controls [GS]ET_LUM_CTL */
+#define AGC_MODE_FORMATTER			0x2000
+#define PRESET_AGC_FORMATTER			0x2100
+#define SHUTTER_MODE_FORMATTER			0x2200
+#define PRESET_SHUTTER_FORMATTER		0x2300
+#define PRESET_CONTOUR_FORMATTER		0x2400
+#define AUTO_CONTOUR_FORMATTER			0x2500
+#define BACK_LIGHT_COMPENSATION_FORMATTER	0x2600
+#define CONTRAST_FORMATTER			0x2700
+#define DYNAMIC_NOISE_CONTROL_FORMATTER		0x2800
+#define FLICKERLESS_MODE_FORMATTER		0x2900
+#define AE_CONTROL_SPEED			0x2A00
+#define BRIGHTNESS_FORMATTER			0x2B00
+#define GAMMA_FORMATTER				0x2C00
+
+/* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */
+#define WB_MODE_FORMATTER			0x1000
+#define AWB_CONTROL_SPEED_FORMATTER		0x1100
+#define AWB_CONTROL_DELAY_FORMATTER		0x1200
+#define PRESET_MANUAL_RED_GAIN_FORMATTER	0x1300
+#define PRESET_MANUAL_BLUE_GAIN_FORMATTER	0x1400
+#define COLOUR_MODE_FORMATTER			0x1500
+#define SATURATION_MODE_FORMATTER1		0x1600
+#define SATURATION_MODE_FORMATTER2		0x1700
+
+/* Selectors for the Status controls [GS]ET_STATUS_CTL */
+#define SAVE_USER_DEFAULTS_FORMATTER		0x0200
+#define RESTORE_USER_DEFAULTS_FORMATTER		0x0300
+#define RESTORE_FACTORY_DEFAULTS_FORMATTER	0x0400
+#define READ_AGC_FORMATTER			0x0500
+#define READ_SHUTTER_FORMATTER			0x0600
+#define READ_RED_GAIN_FORMATTER			0x0700
+#define READ_BLUE_GAIN_FORMATTER		0x0800
+
+/* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */
+#define PT_RELATIVE_CONTROL_FORMATTER		0x01
+#define PT_RESET_CONTROL_FORMATTER		0x02
+#define PT_STATUS_FORMATTER			0x03
 
 /* intermediate buffers with raw data from the USB cam */
 struct pwc_frame_buf
 {
-   void *data;
-   volatile int filled;		/* number of bytes filled */
-   struct pwc_frame_buf *next;	/* list */
-};
-
-/* additionnal informations used when dealing image between kernel and userland */
-struct pwc_imgbuf
-{
-	unsigned long offset;	/* offset of this buffer in the big array of image_data */
-	int   vma_use_count;	/* count the number of time this memory is mapped */
+	struct vb2_buffer vb;	/* common v4l buffer stuff -- must be first */
+	struct list_head list;
+	void *data;
+	int filled;		/* number of bytes filled */
 };
 
 struct pwc_device
 {
 	struct video_device vdev;
-
-   /* Pointer to our usb_device, may be NULL after unplug */
-   struct usb_device *udev;
-
-   int type;                    /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */
-   int release;			/* release number */
-   int features;		/* feature bits */
-   char serial[30];		/* serial number (string) */
-   int error_status;		/* set when something goes wrong with the cam (unplugged, USB errors) */
-   int usb_init;		/* set when the cam has been initialized over USB */
-
-   /*** Video data ***/
-   int vopen;			/* flag */
-   int vendpoint;		/* video isoc endpoint */
-   int vcinterface;		/* video control interface */
-   int valternate;		/* alternate interface needed */
-   int vframes, vsize;		/* frames-per-second & size (see PSZ_*) */
-   int pixfmt;			/* pixelformat: V4L2_PIX_FMT_YUV420 or raw: _PWC1, _PWC2 */
-   int vframe_count;		/* received frames */
-   int vframes_dumped; 		/* counter for dumped frames */
-   int vframes_error;		/* frames received in error */
-   int vmax_packet_size;	/* USB maxpacket size */
-   int vlast_packet_size;	/* for frame synchronisation */
-   int visoc_errors;		/* number of contiguous ISOC errors */
-   int vcompression;		/* desired compression factor */
-   int vbandlength;		/* compressed band length; 0 is uncompressed */
-   char vsnapshot;		/* snapshot mode */
-   char vsync;			/* used by isoc handler */
-   char vmirror;		/* for ToUCaM series */
-	char unplugged;
-
-   int cmd_len;
-   unsigned char cmd_buf[13];
-
-   /* The image acquisition requires 3 to 4 steps:
-      1. data is gathered in short packets from the USB controller
-      2. data is synchronized and packed into a frame buffer
-      3a. in case data is compressed, decompress it directly into image buffer
-      3b. in case data is uncompressed, copy into image buffer with viewport
-      4. data is transferred to the user process
-
-      Note that MAX_ISO_BUFS != MAX_FRAMES != MAX_IMAGES....
-      We have in effect a back-to-back-double-buffer system.
-    */
-   /* 1: isoc */
-   struct pwc_iso_buf sbuf[MAX_ISO_BUFS];
-   char iso_init;
-
-   /* 2: frame */
-   struct pwc_frame_buf *fbuf;	/* all frames */
-   struct pwc_frame_buf *empty_frames, *empty_frames_tail;	/* all empty frames */
-   struct pwc_frame_buf *full_frames, *full_frames_tail;	/* all filled frames */
-   struct pwc_frame_buf *fill_frame;	/* frame currently being filled */
-   struct pwc_frame_buf *read_frame;	/* frame currently read by user process */
-   int frame_header_size, frame_trailer_size;
-   int frame_size;
-   int frame_total_size; /* including header & trailer */
-   int drop_frames;
-
-   /* 3: decompression */
-   void *decompress_data;		/* private data for decompression engine */
-
-   /* 4: image */
-   /* We have an 'image' and a 'view', where 'image' is the fixed-size image
-      as delivered by the camera, and 'view' is the size requested by the
-      program. The camera image is centered in this viewport, laced with
-      a gray or black border. view_min <= image <= view <= view_max;
-    */
-   int image_mask;			/* bitmask of supported sizes */
-   struct pwc_coord view_min, view_max;	/* minimum and maximum viewable sizes */
-   struct pwc_coord abs_max;            /* maximum supported size with compression */
-   struct pwc_coord image, view;	/* image and viewport size */
-   struct pwc_coord offset;		/* offset within the viewport */
-
-   void *image_data;			/* total buffer, which is subdivided into ... */
-   struct pwc_imgbuf images[MAX_IMAGES];/* ...several images... */
-   int fill_image;			/* ...which are rotated. */
-   int len_per_image;			/* length per image */
-   int image_read_pos;			/* In case we read data in pieces, keep track of were we are in the imagebuffer */
-   int image_used[MAX_IMAGES];		/* For MCAPTURE and SYNC */
-
-   struct mutex modlock;		/* to prevent races in video_open(), etc */
-   spinlock_t ptrlock;			/* for manipulating the buffer pointers */
-
-   /*** motorized pan/tilt feature */
-   struct pwc_mpt_range angle_range;
-   int pan_angle;			/* in degrees * 100 */
-   int tilt_angle;			/* absolute angle; 0,0 is home position */
-   int snapshot_button_status;		/* set to 1 when the user push the button, reset to 0 when this value is read */
+	struct mutex modlock;
+
+	/* Pointer to our usb_device, may be NULL after unplug */
+	struct usb_device *udev;
+	/* Protects the setting of udev to NULL by our disconnect handler */
+	struct mutex udevlock;
+
+	/* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */
+	int type;
+	int release;		/* release number */
+	int features;		/* feature bits */
+	char serial[30];	/* serial number (string) */
+
+	/*** Video data ***/
+	struct file *capt_file;	/* file doing video capture */
+	int vendpoint;		/* video isoc endpoint */
+	int vcinterface;	/* video control interface */
+	int valternate;		/* alternate interface needed */
+	int vframes, vsize;	/* frames-per-second & size (see PSZ_*) */
+	int pixfmt;		/* pixelformat: V4L2_PIX_FMT_YUV420 or _PWCX */
+	int vframe_count;	/* received frames */
+	int vmax_packet_size;	/* USB maxpacket size */
+	int vlast_packet_size;	/* for frame synchronisation */
+	int visoc_errors;	/* number of contiguous ISOC errors */
+	int vcompression;	/* desired compression factor */
+	int vbandlength;	/* compressed band length; 0 is uncompressed */
+	char vsnapshot;		/* snapshot mode */
+	char vsync;		/* used by isoc handler */
+	char vmirror;		/* for ToUCaM series */
+	char power_save;	/* Do powersaving for this cam */
+
+	int cmd_len;
+	unsigned char cmd_buf[13];
+
+	struct urb *urbs[MAX_ISO_BUFS];
+	char iso_init;
+
+	/* videobuf2 queue and queued buffers list */
+	struct vb2_queue vb_queue;
+	struct list_head queued_bufs;
+	spinlock_t queued_bufs_lock;
+
+	/*
+	 * Frame currently being filled, this only gets touched by the
+	 * isoc urb complete handler, and by stream start / stop since
+	 * start / stop touch it before / after starting / killing the urbs
+	 * no locking is needed around this
+	 */
+	struct pwc_frame_buf *fill_buf;
+
+	int frame_header_size, frame_trailer_size;
+	int frame_size;
+	int frame_total_size;	/* including header & trailer */
+	int drop_frames;
+
+	void *decompress_data;	/* private data for decompression engine */
+
+	/*
+	 * We have an 'image' and a 'view', where 'image' is the fixed-size img
+	 * as delivered by the camera, and 'view' is the size requested by the
+	 * program. The camera image is centered in this viewport, laced with
+	 * a gray or black border. view_min <= image <= view <= view_max;
+	 */
+	int image_mask;				/* supported sizes */
+	struct pwc_coord view_min, view_max;	/* minimum and maximum view */
+	struct pwc_coord abs_max;		/* maximum supported size */
+	struct pwc_coord image, view;		/* image and viewport size */
+	struct pwc_coord offset;		/* offset of the viewport */
+
+	/*** motorized pan/tilt feature */
+	struct pwc_mpt_range angle_range;
+	int pan_angle;			/* in degrees * 100 */
+	int tilt_angle;			/* absolute angle; 0,0 is home */
+
+	/*
+	 * Set to 1 when the user push the button, reset to 0
+	 * when this value is read from sysfs.
+	 */
+	int snapshot_button_status;
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
-   struct input_dev *button_dev;	/* webcam snapshot button input */
-   char button_phys[64];
+	struct input_dev *button_dev;	/* webcam snapshot button input */
+	char button_phys[64];
 #endif
 
-   /*** Misc. data ***/
-   wait_queue_head_t frameq;		/* When waiting for a frame to finish... */
-#if PWC_INT_PIPE
-   void *usb_int_handler;		/* for the interrupt endpoint */
-#endif
+	/* controls */
+	struct v4l2_ctrl_handler	ctrl_handler;
+	u16				saturation_fmt;
+	struct v4l2_ctrl		*brightness;
+	struct v4l2_ctrl		*contrast;
+	struct v4l2_ctrl		*saturation;
+	struct v4l2_ctrl		*gamma;
+	struct {
+		/* awb / red-blue balance cluster */
+		struct v4l2_ctrl	*auto_white_balance;
+		struct v4l2_ctrl	*red_balance;
+		struct v4l2_ctrl	*blue_balance;
+		/* usb ctrl transfers are slow, so we cache things */
+		int			color_bal_valid;
+		unsigned long		last_color_bal_update; /* In jiffies */
+		s32			last_red_balance;
+		s32			last_blue_balance;
+	};
+	struct {
+		/* autogain / gain cluster */
+		struct v4l2_ctrl	*autogain;
+		struct v4l2_ctrl	*gain;
+		int			gain_valid;
+		unsigned long		last_gain_update; /* In jiffies */
+		s32			last_gain;
+	};
+	struct {
+		/* exposure_auto / exposure cluster */
+		struct v4l2_ctrl	*exposure_auto;
+		struct v4l2_ctrl	*exposure;
+		int			exposure_valid;
+		unsigned long		last_exposure_update; /* In jiffies */
+		s32			last_exposure;
+	};
+	struct v4l2_ctrl		*colorfx;
+	struct {
+		/* autocontour/contour cluster */
+		struct v4l2_ctrl	*autocontour;
+		struct v4l2_ctrl	*contour;
+	};
+	struct v4l2_ctrl		*backlight;
+	struct v4l2_ctrl		*flicker;
+	struct v4l2_ctrl		*noise_reduction;
+	struct v4l2_ctrl		*save_user;
+	struct v4l2_ctrl		*restore_user;
+	struct v4l2_ctrl		*restore_factory;
+	struct {
+		/* motor control cluster */
+		struct v4l2_ctrl	*motor_pan;
+		struct v4l2_ctrl	*motor_tilt;
+		struct v4l2_ctrl	*motor_pan_reset;
+		struct v4l2_ctrl	*motor_tilt_reset;
+	};
+	/* CODEC3 models have both gain and exposure controlled by autogain */
+	struct v4l2_ctrl		*autogain_expo_cluster[3];
 };
 
-#ifdef __cplusplus
-extern "C" {
-#endif
-
 /* Global variables */
 #ifdef CONFIG_USB_PWC_DEBUG
 extern int pwc_trace;
 #endif
-extern int pwc_mbufs;
-
-/** functions in pwc-if.c */
-int pwc_handle_frame(struct pwc_device *pdev);
-void pwc_next_image(struct pwc_device *pdev);
-int pwc_isoc_init(struct pwc_device *pdev);
-void pwc_isoc_cleanup(struct pwc_device *pdev);
 
 /** Functions in pwc-misc.c */
 /* sizes in pixels */
@@ -291,50 +355,25 @@ void pwc_construct(struct pwc_device *pdev);
 /* Request a certain video mode. Returns < 0 if not possible */
 extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot);
 extern unsigned int pwc_get_fps(struct pwc_device *pdev, unsigned int index, unsigned int size);
-/* Calculate the number of bytes per image (not frame) */
 extern int pwc_mpt_reset(struct pwc_device *pdev, int flags);
 extern int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt);
-
-/* Various controls; should be obvious. Value 0..65535, or < 0 on error */
-extern int pwc_get_brightness(struct pwc_device *pdev);
-extern int pwc_set_brightness(struct pwc_device *pdev, int value);
-extern int pwc_get_contrast(struct pwc_device *pdev);
-extern int pwc_set_contrast(struct pwc_device *pdev, int value);
-extern int pwc_get_gamma(struct pwc_device *pdev);
-extern int pwc_set_gamma(struct pwc_device *pdev, int value);
-extern int pwc_get_saturation(struct pwc_device *pdev, int *value);
-extern int pwc_set_saturation(struct pwc_device *pdev, int value);
 extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value);
 extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor);
-extern int pwc_restore_user(struct pwc_device *pdev);
-extern int pwc_save_user(struct pwc_device *pdev);
-extern int pwc_restore_factory(struct pwc_device *pdev);
-
-/* exported for use by v4l2 controls */
-extern int pwc_get_red_gain(struct pwc_device *pdev, int *value);
-extern int pwc_set_red_gain(struct pwc_device *pdev, int value);
-extern int pwc_get_blue_gain(struct pwc_device *pdev, int *value);
-extern int pwc_set_blue_gain(struct pwc_device *pdev, int value);
-extern int pwc_get_awb(struct pwc_device *pdev);
-extern int pwc_set_awb(struct pwc_device *pdev, int mode);
-extern int pwc_set_agc(struct pwc_device *pdev, int mode, int value);
-extern int pwc_get_agc(struct pwc_device *pdev, int *value);
-extern int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value);
-extern int pwc_get_shutter_speed(struct pwc_device *pdev, int *value);
-
-extern int pwc_set_colour_mode(struct pwc_device *pdev, int colour);
-extern int pwc_get_colour_mode(struct pwc_device *pdev, int *colour);
-extern int pwc_set_contour(struct pwc_device *pdev, int contour);
-extern int pwc_get_contour(struct pwc_device *pdev, int *contour);
-extern int pwc_set_backlight(struct pwc_device *pdev, int backlight);
-extern int pwc_get_backlight(struct pwc_device *pdev, int *backlight);
-extern int pwc_set_flicker(struct pwc_device *pdev, int flicker);
-extern int pwc_get_flicker(struct pwc_device *pdev, int *flicker);
-extern int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise);
-extern int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise);
+extern int send_control_msg(struct pwc_device *pdev,
+			    u8 request, u16 value, void *buf, int buflen);
+
+/* Control get / set helpers */
+int pwc_get_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data);
+int pwc_set_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, u8 data);
+int pwc_get_s8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data);
+#define pwc_set_s8_ctrl pwc_set_u8_ctrl
+int pwc_get_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *dat);
+int pwc_set_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, u16 data);
+int pwc_button_ctrl(struct pwc_device *pdev, u16 value);
+int pwc_init_controls(struct pwc_device *pdev);
 
 /* Power down or up the camera; not supported by all models */
-extern int pwc_camera_power(struct pwc_device *pdev, int power);
+extern void pwc_camera_power(struct pwc_device *pdev, int power);
 
 /* Private ioctl()s; see pwc-ioctl.h */
 extern long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg);
@@ -343,12 +382,6 @@ extern const struct v4l2_ioctl_ops pwc_ioctl_ops;
 
 /** pwc-uncompress.c */
 /* Expand frame to image, possibly including decompression. Uses read_frame and fill_image */
-extern int pwc_decompress(struct pwc_device *pdev);
-
-#ifdef __cplusplus
-}
-#endif
-
+int pwc_decompress(struct pwc_device *pdev, struct pwc_frame_buf *fbuf);
 
 #endif
-/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index b42bfa5..d07df22a 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -22,7 +22,6 @@
 #include <linux/mm.h>
 #include <linux/moduleparam.h>
 #include <linux/time.h>
-#include <linux/version.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -40,7 +39,7 @@
 #include <mach/dma.h>
 #include <mach/camera.h>
 
-#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
+#define PXA_CAM_VERSION "0.0.6"
 #define PXA_CAM_DRV_NAME "pxa27x-camera"
 
 /* Camera Interface */
@@ -247,7 +246,7 @@ static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	if (bytes_per_line < 0)
 		return bytes_per_line;
 
-	dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size);
+	dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size);
 
 	*size = bytes_per_line * icd->user_height;
 
@@ -262,13 +261,13 @@ static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
 	int i;
 
 	BUG_ON(in_interrupt());
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		&buf->vb, buf->vb.baddr, buf->vb.bsize);
 
 	/*
@@ -429,7 +428,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 		struct videobuf_buffer *vb, enum v4l2_field field)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	struct device *dev = pcdev->soc_host.v4l2_dev.dev;
 	struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
@@ -636,11 +635,11 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq,
 			       struct videobuf_buffer *vb)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d active=%p\n",
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d active=%p\n",
 		__func__, vb, vb->baddr, vb->bsize, pcdev->active);
 
 	list_add_tail(&vb->queue, &pcdev->capture);
@@ -658,7 +657,7 @@ static void pxa_videobuf_release(struct videobuf_queue *vq,
 	struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
 #ifdef DEBUG
 	struct soc_camera_device *icd = vq->priv_data;
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 
 	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
@@ -843,7 +842,7 @@ static struct videobuf_queue_ops pxa_videobuf_ops = {
 static void pxa_camera_init_videobuf(struct videobuf_queue *q,
 			      struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 
 	/*
@@ -972,7 +971,7 @@ static irqreturn_t pxa_camera_irq(int irq, void *data)
  */
 static int pxa_camera_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 
 	if (pcdev->icd)
@@ -982,7 +981,7 @@ static int pxa_camera_add_device(struct soc_camera_device *icd)
 
 	pcdev->icd = icd;
 
-	dev_info(icd->dev.parent, "PXA Camera driver attached to camera %d\n",
+	dev_info(icd->parent, "PXA Camera driver attached to camera %d\n",
 		 icd->devnum);
 
 	return 0;
@@ -991,12 +990,12 @@ static int pxa_camera_add_device(struct soc_camera_device *icd)
 /* Called with .video_lock held */
 static void pxa_camera_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 
 	BUG_ON(icd != pcdev->icd);
 
-	dev_info(icd->dev.parent, "PXA Camera driver detached from camera %d\n",
+	dev_info(icd->parent, "PXA Camera driver detached from camera %d\n",
 		 icd->devnum);
 
 	/* disable capture, disable interrupts */
@@ -1057,7 +1056,7 @@ static int test_platform_param(struct pxa_camera_dev *pcdev,
 static void pxa_camera_setup_cicr(struct soc_camera_device *icd,
 				  unsigned long flags, __u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	unsigned long dw, bpp;
@@ -1152,7 +1151,7 @@ static void pxa_camera_setup_cicr(struct soc_camera_device *icd,
 
 static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	unsigned long bus_flags, camera_flags, common_flags;
 	int ret;
@@ -1210,7 +1209,7 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 static int pxa_camera_try_bus_param(struct soc_camera_device *icd,
 				    unsigned char buswidth)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	unsigned long bus_flags, camera_flags;
 	int ret = test_platform_param(pcdev, buswidth, &bus_flags);
@@ -1247,7 +1246,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, unsigned int id
 				  struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	int formats = 0, ret;
 	struct pxa_cam *cam;
 	enum v4l2_mbus_pixelcode code;
@@ -1335,9 +1334,9 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 			       struct v4l2_crop *a)
 {
 	struct v4l2_rect *rect = &a->c;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct pxa_camera_dev *pcdev = ici->priv;
-	struct device *dev = icd->dev.parent;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_sense sense = {
 		.master_clock = pcdev->mclk,
@@ -1379,7 +1378,7 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 			return ret;
 
 		if (pxa_camera_check_frame(mf.width, mf.height)) {
-			dev_warn(icd->dev.parent,
+			dev_warn(icd->parent,
 				 "Inconsistent state. Use S_FMT to repair\n");
 			return -EINVAL;
 		}
@@ -1406,9 +1405,9 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct pxa_camera_dev *pcdev = ici->priv;
-	struct device *dev = icd->dev.parent;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate = NULL;
 	struct soc_camera_sense sense = {
@@ -1485,7 +1484,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -1499,16 +1498,11 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 			      &pix->height, 32, 2048, 0,
 			      pixfmt == V4L2_PIX_FMT_YUV422P ? 4 : 0);
 
-	pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
-						    xlate->host_fmt);
-	if (pix->bytesperline < 0)
-		return pix->bytesperline;
-	pix->sizeimage = pix->height * pix->bytesperline;
-
 	/* limit to sensor capabilities */
 	mf.width	= pix->width;
 	mf.height	= pix->height;
-	mf.field	= pix->field;
+	/* Only progressive video supported so far */
+	mf.field	= V4L2_FIELD_NONE;
 	mf.colorspace	= pix->colorspace;
 	mf.code		= xlate->code;
 
@@ -1527,7 +1521,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 		break;
 	default:
 		/* TODO: support interlaced at least in pass-through mode */
-		dev_err(icd->dev.parent, "Field type %d unsupported.\n",
+		dev_err(icd->parent, "Field type %d unsupported.\n",
 			mf.field);
 		return -EINVAL;
 	}
@@ -1578,15 +1572,14 @@ static int pxa_camera_querycap(struct soc_camera_host *ici,
 {
 	/* cap->name is set by the firendly caller:-> */
 	strlcpy(cap->card, pxa_cam_driver_description, sizeof(cap->card));
-	cap->version = PXA_CAM_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
 }
 
-static int pxa_camera_suspend(struct soc_camera_device *icd, pm_message_t state)
+static int pxa_camera_suspend(struct device *dev)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	int i = 0, ret = 0;
 
@@ -1596,15 +1589,19 @@ static int pxa_camera_suspend(struct soc_camera_device *icd, pm_message_t state)
 	pcdev->save_cicr[i++] = __raw_readl(pcdev->base + CICR3);
 	pcdev->save_cicr[i++] = __raw_readl(pcdev->base + CICR4);
 
-	if ((pcdev->icd) && (pcdev->icd->ops->suspend))
-		ret = pcdev->icd->ops->suspend(pcdev->icd, state);
+	if (pcdev->icd) {
+		struct v4l2_subdev *sd = soc_camera_to_subdev(pcdev->icd);
+		ret = v4l2_subdev_call(sd, core, s_power, 0);
+		if (ret == -ENOIOCTLCMD)
+			ret = 0;
+	}
 
 	return ret;
 }
 
-static int pxa_camera_resume(struct soc_camera_device *icd)
+static int pxa_camera_resume(struct device *dev)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	int i = 0, ret = 0;
 
@@ -1618,8 +1615,12 @@ static int pxa_camera_resume(struct soc_camera_device *icd)
 	__raw_writel(pcdev->save_cicr[i++], pcdev->base + CICR3);
 	__raw_writel(pcdev->save_cicr[i++], pcdev->base + CICR4);
 
-	if ((pcdev->icd) && (pcdev->icd->ops->resume))
-		ret = pcdev->icd->ops->resume(pcdev->icd);
+	if (pcdev->icd) {
+		struct v4l2_subdev *sd = soc_camera_to_subdev(pcdev->icd);
+		ret = v4l2_subdev_call(sd, core, s_power, 1);
+		if (ret == -ENOIOCTLCMD)
+			ret = 0;
+	}
 
 	/* Restart frame capture if active buffer exists */
 	if (!ret && pcdev->active)
@@ -1632,8 +1633,6 @@ static struct soc_camera_host_ops pxa_soc_camera_host_ops = {
 	.owner		= THIS_MODULE,
 	.add		= pxa_camera_add_device,
 	.remove		= pxa_camera_remove_device,
-	.suspend	= pxa_camera_suspend,
-	.resume		= pxa_camera_resume,
 	.set_crop	= pxa_camera_set_crop,
 	.get_formats	= pxa_camera_get_formats,
 	.put_formats	= pxa_camera_put_formats,
@@ -1818,9 +1817,15 @@ static int __devexit pxa_camera_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct dev_pm_ops pxa_camera_pm = {
+	.suspend	= pxa_camera_suspend,
+	.resume		= pxa_camera_resume,
+};
+
 static struct platform_driver pxa_camera_driver = {
 	.driver 	= {
 		.name	= PXA_CAM_DRV_NAME,
+		.pm	= &pxa_camera_pm,
 	},
 	.probe		= pxa_camera_probe,
 	.remove		= __devexit_p(pxa_camera_remove),
@@ -1843,4 +1848,5 @@ module_exit(pxa_camera_exit);
 MODULE_DESCRIPTION("PXA27x SoC Camera Host driver");
 MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(PXA_CAM_VERSION);
 MODULE_ALIAS("platform:" PXA_CAM_DRV_NAME);
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index 57e11b6..847ccc0 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -1364,10 +1364,9 @@ static int rj54n1_video_probe(struct soc_camera_device *icd,
 	int data1, data2;
 	int ret;
 
-	/* This could be a BUG_ON() or a WARN_ON(), or remove it completely */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/* Read out the chip version register */
 	data1 = reg_read(client, RJ54N1_DEV_CODE);
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 5b9dce8..803c9c8 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -16,15 +16,10 @@
  * Example maximum bandwidth utilization:
  *
  * -full size, color mode YUYV or YUV422P: 2 channels at once
- *
  * -full or half size Grey scale: all 4 channels at once
- *
  * -half size, color mode YUYV or YUV422P: all 4 channels at once
- *
  * -full size, color mode YUYV or YUV422P 1/2 frame rate: all 4 channels
  *  at once.
- *  (TODO: Incorporate videodev2 frame rate(FR) enumeration,
- *  which is currently experimental.)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -47,7 +42,6 @@
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-common.h>
@@ -56,12 +50,7 @@
 #include <linux/vmalloc.h>
 #include <linux/usb.h>
 
-#define S2255_MAJOR_VERSION	1
-#define S2255_MINOR_VERSION	21
-#define S2255_RELEASE		0
-#define S2255_VERSION		KERNEL_VERSION(S2255_MAJOR_VERSION, \
-					       S2255_MINOR_VERSION, \
-					       S2255_RELEASE)
+#define S2255_VERSION		"1.22.1"
 #define FIRMWARE_FILE_NAME "f2255usb.bin"
 
 /* default JPEG quality */
@@ -126,7 +115,7 @@
 #define MASK_COLOR       0x000000ff
 #define MASK_JPG_QUALITY 0x0000ff00
 #define MASK_INPUT_TYPE  0x000f0000
-/* frame decimation. Not implemented by V4L yet(experimental in V4L) */
+/* frame decimation. */
 #define FDEC_1		1	/* capture every frame. default */
 #define FDEC_2		2	/* capture every 2nd frame */
 #define FDEC_3		3	/* capture every 3rd frame */
@@ -312,9 +301,9 @@ struct s2255_fh {
 };
 
 /* current cypress EEPROM firmware version */
-#define S2255_CUR_USB_FWVER	((3 << 8) | 11)
+#define S2255_CUR_USB_FWVER	((3 << 8) | 12)
 /* current DSP FW version */
-#define S2255_CUR_DSP_FWVER     10102
+#define S2255_CUR_DSP_FWVER     10104
 /* Need DSP version 5+ for video status feature */
 #define S2255_MIN_DSP_STATUS      5
 #define S2255_MIN_DSP_COLORFILTER 8
@@ -502,7 +491,7 @@ static void planar422p_to_yuv_packed(const unsigned char *in,
 
 static void s2255_reset_dsppower(struct s2255_dev *dev)
 {
-	s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b01, NULL, 0, 1);
+	s2255_vendor_req(dev, 0x40, 0x0000, 0x0001, NULL, 0, 1);
 	msleep(10);
 	s2255_vendor_req(dev, 0x50, 0x0000, 0x0000, NULL, 0, 1);
 	msleep(600);
@@ -856,7 +845,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(cap->driver, "s2255", sizeof(cap->driver));
 	strlcpy(cap->card, "s2255", sizeof(cap->card));
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
-	cap->version = S2255_VERSION;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 	return 0;
 }
@@ -1984,9 +1972,8 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
 			  video_device_node_name(&channel->vdev));
 
 	}
-	printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %d.%d\n",
-	       S2255_MAJOR_VERSION,
-	       S2255_MINOR_VERSION);
+	printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %s\n",
+	       S2255_VERSION);
 	/* if no channels registered, return error and probe will fail*/
 	if (atomic_read(&dev->num_channels) == 0) {
 		v4l2_device_unregister(&dev->v4l2_dev);
@@ -2302,15 +2289,12 @@ static int s2255_board_init(struct s2255_dev *dev)
 	/* query the firmware */
 	fw_ver = s2255_get_fx2fw(dev);
 
-	printk(KERN_INFO "2255 usb firmware version %d.%d\n",
+	printk(KERN_INFO "s2255: usb firmware version %d.%d\n",
 	       (fw_ver >> 8) & 0xff,
 	       fw_ver & 0xff);
 
 	if (fw_ver < S2255_CUR_USB_FWVER)
-		dev_err(&dev->udev->dev,
-			"usb firmware not up to date %d.%d\n",
-			(fw_ver >> 8) & 0xff,
-			fw_ver & 0xff);
+		printk(KERN_INFO "s2255: newer USB firmware available\n");
 
 	for (j = 0; j < MAX_CHANNELS; j++) {
 		struct s2255_channel *channel = &dev->channel[j];
@@ -2721,3 +2705,4 @@ module_exit(usb_s2255_exit);
 MODULE_DESCRIPTION("Sensoray 2255 Video for Linux driver");
 MODULE_AUTHOR("Dean Anderson (Sensoray Company Inc.)");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(S2255_VERSION);
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 81b4a82..0d730e5 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -11,7 +11,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/bug.h>
@@ -451,7 +450,6 @@ static int fimc_vidioc_querycap_capture(struct file *file, void *priv,
 	strncpy(cap->driver, fimc->pdev->name, sizeof(cap->driver) - 1);
 	strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1);
 	cap->bus_info[0] = 0;
-	cap->version = KERNEL_VERSION(1, 0, 0);
 	cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
 			    V4L2_CAP_VIDEO_CAPTURE_MPLANE;
 
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index bdf19ad..aa55066 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -12,7 +12,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/bug.h>
@@ -774,7 +773,6 @@ static int fimc_m2m_querycap(struct file *file, void *priv,
 	strncpy(cap->driver, fimc->pdev->name, sizeof(cap->driver) - 1);
 	strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1);
 	cap->bus_info[0] = 0;
-	cap->version = KERNEL_VERSION(1, 0, 0);
 	cap->capabilities = V4L2_CAP_STREAMING |
 		V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT |
 		V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE;
@@ -1937,3 +1935,4 @@ module_exit(fimc_exit);
 MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
 MODULE_DESCRIPTION("S5P FIMC camera host interface/video postprocessor driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.1");
diff --git a/drivers/media/video/s5p-mfc/Makefile b/drivers/media/video/s5p-mfc/Makefile
new file mode 100644
index 0000000..d066340
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) := s5p-mfc.o
+s5p-mfc-y += s5p_mfc.o s5p_mfc_intr.o s5p_mfc_opr.o
+s5p-mfc-y += s5p_mfc_dec.o s5p_mfc_enc.o
+s5p-mfc-y += s5p_mfc_ctrl.o s5p_mfc_cmd.o
+s5p-mfc-y += s5p_mfc_pm.o s5p_mfc_shm.o
diff --git a/drivers/media/video/s5p-mfc/regs-mfc.h b/drivers/media/video/s5p-mfc/regs-mfc.h
new file mode 100644
index 0000000..053a8a8
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/regs-mfc.h
@@ -0,0 +1,413 @@
+/*
+ * Register definition file for Samsung MFC V5.1 Interface (FIMV) driver
+ *
+ * Kamil Debski, Copyright (c) 2010 Samsung Electronics
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _REGS_FIMV_H
+#define _REGS_FIMV_H
+
+#define S5P_FIMV_REG_SIZE	(S5P_FIMV_END_ADDR - S5P_FIMV_START_ADDR)
+#define S5P_FIMV_REG_COUNT	((S5P_FIMV_END_ADDR - S5P_FIMV_START_ADDR) / 4)
+
+/* Number of bits that the buffer address should be shifted for particular
+ * MFC buffers.  */
+#define S5P_FIMV_START_ADDR		0x0000
+#define S5P_FIMV_END_ADDR		0xe008
+
+#define S5P_FIMV_SW_RESET		0x0000
+#define S5P_FIMV_RISC_HOST_INT		0x0008
+
+/* Command from HOST to RISC */
+#define S5P_FIMV_HOST2RISC_CMD		0x0030
+#define S5P_FIMV_HOST2RISC_ARG1		0x0034
+#define S5P_FIMV_HOST2RISC_ARG2		0x0038
+#define S5P_FIMV_HOST2RISC_ARG3		0x003c
+#define S5P_FIMV_HOST2RISC_ARG4		0x0040
+
+/* Command from RISC to HOST */
+#define S5P_FIMV_RISC2HOST_CMD		0x0044
+#define S5P_FIMV_RISC2HOST_CMD_MASK	0x1FFFF
+#define S5P_FIMV_RISC2HOST_ARG1		0x0048
+#define S5P_FIMV_RISC2HOST_ARG2		0x004c
+#define S5P_FIMV_RISC2HOST_ARG3		0x0050
+#define S5P_FIMV_RISC2HOST_ARG4		0x0054
+
+#define S5P_FIMV_FW_VERSION		0x0058
+#define S5P_FIMV_SYS_MEM_SZ		0x005c
+#define S5P_FIMV_FW_STATUS		0x0080
+
+/* Memory controller register */
+#define S5P_FIMV_MC_DRAMBASE_ADR_A	0x0508
+#define S5P_FIMV_MC_DRAMBASE_ADR_B	0x050c
+#define S5P_FIMV_MC_STATUS		0x0510
+
+/* Common register */
+#define S5P_FIMV_COMMON_BASE_A		0x0600
+#define S5P_FIMV_COMMON_BASE_B		0x0700
+
+/* Decoder */
+#define S5P_FIMV_DEC_CHROMA_ADR		(S5P_FIMV_COMMON_BASE_A)
+#define S5P_FIMV_DEC_LUMA_ADR		(S5P_FIMV_COMMON_BASE_B)
+
+/* H.264 decoding */
+#define S5P_FIMV_H264_VERT_NB_MV_ADR	(S5P_FIMV_COMMON_BASE_A + 0x8c)
+					/* vertical neighbor motion vector */
+#define S5P_FIMV_H264_NB_IP_ADR		(S5P_FIMV_COMMON_BASE_A + 0x90)
+					/* neighbor pixels for intra pred */
+#define S5P_FIMV_H264_MV_ADR		(S5P_FIMV_COMMON_BASE_B + 0x80)
+					/* H264 motion vector */
+
+/* MPEG4 decoding */
+#define S5P_FIMV_MPEG4_NB_DCAC_ADR	(S5P_FIMV_COMMON_BASE_A + 0x8c)
+					/* neighbor AC/DC coeff. */
+#define S5P_FIMV_MPEG4_UP_NB_MV_ADR	(S5P_FIMV_COMMON_BASE_A + 0x90)
+					/* upper neighbor motion vector */
+#define S5P_FIMV_MPEG4_SA_MV_ADR	(S5P_FIMV_COMMON_BASE_A + 0x94)
+					/* subseq. anchor motion vector */
+#define S5P_FIMV_MPEG4_OT_LINE_ADR	(S5P_FIMV_COMMON_BASE_A + 0x98)
+					/* overlap transform line */
+#define S5P_FIMV_MPEG4_SP_ADR		(S5P_FIMV_COMMON_BASE_A + 0xa8)
+					/* syntax parser */
+
+/* H.263 decoding */
+#define S5P_FIMV_H263_NB_DCAC_ADR	(S5P_FIMV_COMMON_BASE_A + 0x8c)
+#define S5P_FIMV_H263_UP_NB_MV_ADR	(S5P_FIMV_COMMON_BASE_A + 0x90)
+#define S5P_FIMV_H263_SA_MV_ADR		(S5P_FIMV_COMMON_BASE_A + 0x94)
+#define S5P_FIMV_H263_OT_LINE_ADR	(S5P_FIMV_COMMON_BASE_A + 0x98)
+
+/* VC-1 decoding */
+#define S5P_FIMV_VC1_NB_DCAC_ADR	(S5P_FIMV_COMMON_BASE_A + 0x8c)
+#define S5P_FIMV_VC1_UP_NB_MV_ADR	(S5P_FIMV_COMMON_BASE_A + 0x90)
+#define S5P_FIMV_VC1_SA_MV_ADR		(S5P_FIMV_COMMON_BASE_A + 0x94)
+#define S5P_FIMV_VC1_OT_LINE_ADR	(S5P_FIMV_COMMON_BASE_A + 0x98)
+#define S5P_FIMV_VC1_BITPLANE3_ADR	(S5P_FIMV_COMMON_BASE_A + 0x9c)
+					/* bitplane3 */
+#define S5P_FIMV_VC1_BITPLANE2_ADR	(S5P_FIMV_COMMON_BASE_A + 0xa0)
+					/* bitplane2 */
+#define S5P_FIMV_VC1_BITPLANE1_ADR	(S5P_FIMV_COMMON_BASE_A + 0xa4)
+					/* bitplane1 */
+
+/* Encoder */
+#define S5P_FIMV_ENC_REF0_LUMA_ADR	(S5P_FIMV_COMMON_BASE_A + 0x1c)
+#define S5P_FIMV_ENC_REF1_LUMA_ADR	(S5P_FIMV_COMMON_BASE_A + 0x20)
+					/* reconstructed luma */
+#define S5P_FIMV_ENC_REF0_CHROMA_ADR	(S5P_FIMV_COMMON_BASE_B)
+#define S5P_FIMV_ENC_REF1_CHROMA_ADR	(S5P_FIMV_COMMON_BASE_B + 0x04)
+					/* reconstructed chroma */
+#define S5P_FIMV_ENC_REF2_LUMA_ADR	(S5P_FIMV_COMMON_BASE_B + 0x10)
+#define S5P_FIMV_ENC_REF2_CHROMA_ADR	(S5P_FIMV_COMMON_BASE_B + 0x08)
+#define S5P_FIMV_ENC_REF3_LUMA_ADR	(S5P_FIMV_COMMON_BASE_B + 0x14)
+#define S5P_FIMV_ENC_REF3_CHROMA_ADR	(S5P_FIMV_COMMON_BASE_B + 0x0c)
+
+/* H.264 encoding */
+#define S5P_FIMV_H264_UP_MV_ADR		(S5P_FIMV_COMMON_BASE_A)
+					/* upper motion vector */
+#define S5P_FIMV_H264_NBOR_INFO_ADR	(S5P_FIMV_COMMON_BASE_A + 0x04)
+					/* entropy engine's neighbor info. */
+#define S5P_FIMV_H264_UP_INTRA_MD_ADR	(S5P_FIMV_COMMON_BASE_A + 0x08)
+					/* upper intra MD */
+#define S5P_FIMV_H264_COZERO_FLAG_ADR	(S5P_FIMV_COMMON_BASE_A + 0x10)
+					/* direct cozero flag */
+#define S5P_FIMV_H264_UP_INTRA_PRED_ADR	(S5P_FIMV_COMMON_BASE_B + 0x40)
+					/* upper intra PRED */
+
+/* H.263 encoding */
+#define S5P_FIMV_H263_UP_MV_ADR		(S5P_FIMV_COMMON_BASE_A)
+					/* upper motion vector */
+#define S5P_FIMV_H263_ACDC_COEF_ADR	(S5P_FIMV_COMMON_BASE_A + 0x04)
+					/* upper Q coeff. */
+
+/* MPEG4 encoding */
+#define S5P_FIMV_MPEG4_UP_MV_ADR	(S5P_FIMV_COMMON_BASE_A)
+					/* upper motion vector */
+#define S5P_FIMV_MPEG4_ACDC_COEF_ADR	(S5P_FIMV_COMMON_BASE_A + 0x04)
+					/* upper Q coeff. */
+#define S5P_FIMV_MPEG4_COZERO_FLAG_ADR	(S5P_FIMV_COMMON_BASE_A + 0x10)
+					/* direct cozero flag */
+
+#define S5P_FIMV_ENC_REF_B_LUMA_ADR     0x062c /* ref B Luma addr */
+#define S5P_FIMV_ENC_REF_B_CHROMA_ADR   0x0630 /* ref B Chroma addr */
+
+#define S5P_FIMV_ENC_CUR_LUMA_ADR	0x0718 /* current Luma addr */
+#define S5P_FIMV_ENC_CUR_CHROMA_ADR	0x071C /* current Chroma addr */
+
+/* Codec common register */
+#define S5P_FIMV_ENC_HSIZE_PX		0x0818 /* frame width at encoder */
+#define S5P_FIMV_ENC_VSIZE_PX		0x081c /* frame height at encoder */
+#define S5P_FIMV_ENC_PROFILE		0x0830 /* profile register */
+#define S5P_FIMV_ENC_PROFILE_H264_MAIN			0
+#define S5P_FIMV_ENC_PROFILE_H264_HIGH			1
+#define S5P_FIMV_ENC_PROFILE_H264_BASELINE		2
+#define S5P_FIMV_ENC_PROFILE_MPEG4_SIMPLE		0
+#define S5P_FIMV_ENC_PROFILE_MPEG4_ADVANCED_SIMPLE	1
+#define S5P_FIMV_ENC_PIC_STRUCT		0x083c /* picture field/frame flag */
+#define S5P_FIMV_ENC_LF_CTRL		0x0848 /* loop filter control */
+#define S5P_FIMV_ENC_ALPHA_OFF		0x084c /* loop filter alpha offset */
+#define S5P_FIMV_ENC_BETA_OFF		0x0850 /* loop filter beta offset */
+#define S5P_FIMV_MR_BUSIF_CTRL		0x0854 /* hidden, bus interface ctrl */
+#define S5P_FIMV_ENC_PXL_CACHE_CTRL	0x0a00 /* pixel cache control */
+
+/* Channel & stream interface register */
+#define S5P_FIMV_SI_RTN_CHID		0x2000 /* Return CH inst ID register */
+#define S5P_FIMV_SI_CH0_INST_ID		0x2040 /* codec instance ID */
+#define S5P_FIMV_SI_CH1_INST_ID		0x2080 /* codec instance ID */
+/* Decoder */
+#define S5P_FIMV_SI_VRESOL		0x2004 /* vertical res of decoder */
+#define S5P_FIMV_SI_HRESOL		0x2008 /* horizontal res of decoder */
+#define S5P_FIMV_SI_BUF_NUMBER		0x200c /* number of frames in the
+								decoded pic */
+#define S5P_FIMV_SI_DISPLAY_Y_ADR	0x2010 /* luma addr of displayed pic */
+#define S5P_FIMV_SI_DISPLAY_C_ADR	0x2014 /* chroma addrof displayed pic */
+#define S5P_FIMV_SI_CONSUMED_BYTES	0x2018 /* Consumed number of bytes to
+							decode a frame */
+#define S5P_FIMV_SI_DISPLAY_STATUS	0x201c /* status of decoded picture */
+
+#define S5P_FIMV_SI_CH0_SB_ST_ADR	0x2044 /* start addr of stream buf */
+#define S5P_FIMV_SI_CH0_SB_FRM_SIZE	0x2048 /* size of stream buf */
+#define S5P_FIMV_SI_CH0_DESC_ADR	0x204c /* addr of descriptor buf */
+#define S5P_FIMV_SI_CH0_CPB_SIZE	0x2058 /* max size of coded pic. buf */
+#define S5P_FIMV_SI_CH0_DESC_SIZE	0x205c /* max size of descriptor buf */
+
+#define S5P_FIMV_SI_CH1_SB_ST_ADR	0x2084 /* start addr of stream buf */
+#define S5P_FIMV_SI_CH1_SB_FRM_SIZE	0x2088 /* size of stream buf */
+#define S5P_FIMV_SI_CH1_DESC_ADR	0x208c /* addr of descriptor buf */
+#define S5P_FIMV_SI_CH1_CPB_SIZE	0x2098 /* max size of coded pic. buf */
+#define S5P_FIMV_SI_CH1_DESC_SIZE	0x209c /* max size of descriptor buf */
+
+#define S5P_FIMV_CRC_LUMA0		0x2030 /* luma crc data per frame
+								(top field) */
+#define S5P_FIMV_CRC_CHROMA0		0x2034 /* chroma crc data per frame
+								(top field) */
+#define S5P_FIMV_CRC_LUMA1		0x2038 /* luma crc data per bottom
+								field */
+#define S5P_FIMV_CRC_CHROMA1		0x203c /* chroma crc data per bottom
+								field */
+
+/* Display status */
+#define S5P_FIMV_DEC_STATUS_DECODING_ONLY		0
+#define S5P_FIMV_DEC_STATUS_DECODING_DISPLAY		1
+#define S5P_FIMV_DEC_STATUS_DISPLAY_ONLY		2
+#define S5P_FIMV_DEC_STATUS_DECODING_EMPTY		3
+#define S5P_FIMV_DEC_STATUS_DECODING_STATUS_MASK	7
+#define S5P_FIMV_DEC_STATUS_PROGRESSIVE			(0<<3)
+#define S5P_FIMV_DEC_STATUS_INTERLACE			(1<<3)
+#define S5P_FIMV_DEC_STATUS_INTERLACE_MASK		(1<<3)
+#define S5P_FIMV_DEC_STATUS_CRC_NUMBER_TWO		(0<<4)
+#define S5P_FIMV_DEC_STATUS_CRC_NUMBER_FOUR		(1<<4)
+#define S5P_FIMV_DEC_STATUS_CRC_NUMBER_MASK		(1<<4)
+#define S5P_FIMV_DEC_STATUS_CRC_GENERATED		(1<<5)
+#define S5P_FIMV_DEC_STATUS_CRC_NOT_GENERATED		(0<<5)
+#define S5P_FIMV_DEC_STATUS_CRC_MASK			(1<<5)
+
+#define S5P_FIMV_DEC_STATUS_RESOLUTION_MASK		(3<<4)
+#define S5P_FIMV_DEC_STATUS_RESOLUTION_INC		(1<<4)
+#define S5P_FIMV_DEC_STATUS_RESOLUTION_DEC		(2<<4)
+
+/* Decode frame address */
+#define S5P_FIMV_DECODE_Y_ADR			0x2024
+#define S5P_FIMV_DECODE_C_ADR			0x2028
+
+/* Decoded frame tpe */
+#define S5P_FIMV_DECODE_FRAME_TYPE		0x2020
+#define S5P_FIMV_DECODE_FRAME_MASK		7
+
+#define S5P_FIMV_DECODE_FRAME_SKIPPED		0
+#define S5P_FIMV_DECODE_FRAME_I_FRAME		1
+#define S5P_FIMV_DECODE_FRAME_P_FRAME		2
+#define S5P_FIMV_DECODE_FRAME_B_FRAME		3
+#define S5P_FIMV_DECODE_FRAME_OTHER_FRAME	4
+
+/* Sizes of buffers required for decoding */
+#define S5P_FIMV_DEC_NB_IP_SIZE			(32 * 1024)
+#define S5P_FIMV_DEC_VERT_NB_MV_SIZE		(16 * 1024)
+#define S5P_FIMV_DEC_NB_DCAC_SIZE		(16 * 1024)
+#define S5P_FIMV_DEC_UPNB_MV_SIZE		(68 * 1024)
+#define S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE		(136 * 1024)
+#define S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE     (32 * 1024)
+#define S5P_FIMV_DEC_VC1_BITPLANE_SIZE		(2 * 1024)
+#define S5P_FIMV_DEC_STX_PARSER_SIZE		(68 * 1024)
+
+#define S5P_FIMV_DEC_BUF_ALIGN			(8 * 1024)
+#define S5P_FIMV_ENC_BUF_ALIGN			(8 * 1024)
+#define S5P_FIMV_NV12M_HALIGN			16
+#define S5P_FIMV_NV12M_LVALIGN			16
+#define S5P_FIMV_NV12M_CVALIGN			8
+#define S5P_FIMV_NV12MT_HALIGN			128
+#define S5P_FIMV_NV12MT_VALIGN			32
+#define S5P_FIMV_NV12M_SALIGN			2048
+#define S5P_FIMV_NV12MT_SALIGN			8192
+
+/* Sizes of buffers required for encoding */
+#define S5P_FIMV_ENC_UPMV_SIZE		0x10000
+#define S5P_FIMV_ENC_COLFLG_SIZE	0x10000
+#define S5P_FIMV_ENC_INTRAMD_SIZE	0x10000
+#define S5P_FIMV_ENC_INTRAPRED_SIZE	0x4000
+#define S5P_FIMV_ENC_NBORINFO_SIZE	0x10000
+#define S5P_FIMV_ENC_ACDCCOEF_SIZE	0x10000
+
+/* Encoder */
+#define S5P_FIMV_ENC_SI_STRM_SIZE	0x2004 /* stream size */
+#define S5P_FIMV_ENC_SI_PIC_CNT		0x2008 /* picture count */
+#define S5P_FIMV_ENC_SI_WRITE_PTR	0x200c /* write pointer */
+#define S5P_FIMV_ENC_SI_SLICE_TYPE	0x2010 /* slice type(I/P/B/IDR) */
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_NON_CODED	0
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_I		1
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_P		2
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_B		3
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_SKIPPED	4
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_OTHERS	5
+#define S5P_FIMV_ENCODED_Y_ADDR         0x2014 /* the addr of the encoded
+								luma pic */
+#define S5P_FIMV_ENCODED_C_ADDR         0x2018 /* the addr of the encoded
+								chroma pic */
+
+#define S5P_FIMV_ENC_SI_CH0_SB_ADR	0x2044 /* addr of stream buf */
+#define S5P_FIMV_ENC_SI_CH0_SB_SIZE	0x204c /* size of stream buf */
+#define S5P_FIMV_ENC_SI_CH0_CUR_Y_ADR	0x2050 /* current Luma addr */
+#define S5P_FIMV_ENC_SI_CH0_CUR_C_ADR	0x2054 /* current Chroma addr */
+#define S5P_FIMV_ENC_SI_CH0_FRAME_INS	0x2058 /* frame insertion */
+
+#define S5P_FIMV_ENC_SI_CH1_SB_ADR	0x2084 /* addr of stream buf */
+#define S5P_FIMV_ENC_SI_CH1_SB_SIZE	0x208c /* size of stream buf */
+#define S5P_FIMV_ENC_SI_CH1_CUR_Y_ADR	0x2090 /* current Luma addr */
+#define S5P_FIMV_ENC_SI_CH1_CUR_C_ADR	0x2094 /* current Chroma addr */
+#define S5P_FIMV_ENC_SI_CH1_FRAME_INS	0x2098 /* frame insertion */
+
+#define S5P_FIMV_ENC_PIC_TYPE_CTRL	0xc504 /* pic type level control */
+#define S5P_FIMV_ENC_B_RECON_WRITE_ON	0xc508 /* B frame recon write ctrl */
+#define S5P_FIMV_ENC_MSLICE_CTRL	0xc50c /* multi slice control */
+#define S5P_FIMV_ENC_MSLICE_MB		0xc510 /* MB number in the one slice */
+#define S5P_FIMV_ENC_MSLICE_BIT		0xc514 /* bit count for one slice */
+#define S5P_FIMV_ENC_CIR_CTRL		0xc518 /* number of intra refresh MB */
+#define S5P_FIMV_ENC_MAP_FOR_CUR	0xc51c /* linear or tiled mode */
+#define S5P_FIMV_ENC_PADDING_CTRL	0xc520 /* padding control */
+
+#define S5P_FIMV_ENC_RC_CONFIG		0xc5a0 /* RC config */
+#define S5P_FIMV_ENC_RC_BIT_RATE	0xc5a8 /* bit rate */
+#define S5P_FIMV_ENC_RC_QBOUND		0xc5ac /* max/min QP */
+#define S5P_FIMV_ENC_RC_RPARA		0xc5b0 /* rate control reaction coeff */
+#define S5P_FIMV_ENC_RC_MB_CTRL		0xc5b4 /* MB adaptive scaling */
+
+/* Encoder for H264 only */
+#define S5P_FIMV_ENC_H264_ENTROPY_MODE	0xd004 /* CAVLC or CABAC */
+#define S5P_FIMV_ENC_H264_ALPHA_OFF	0xd008 /* loop filter alpha offset */
+#define S5P_FIMV_ENC_H264_BETA_OFF	0xd00c /* loop filter beta offset */
+#define S5P_FIMV_ENC_H264_NUM_OF_REF	0xd010 /* number of reference for P/B */
+#define S5P_FIMV_ENC_H264_TRANS_FLAG	0xd034 /* 8x8 transform flag in PPS &
+								high profile */
+
+#define S5P_FIMV_ENC_RC_FRAME_RATE	0xd0d0 /* frame rate */
+
+/* Encoder for MPEG4 only */
+#define S5P_FIMV_ENC_MPEG4_QUART_PXL	0xe008 /* qpel interpolation ctrl */
+
+/* Additional */
+#define S5P_FIMV_SI_CH0_DPB_CONF_CTRL   0x2068 /* DPB Config Control Register */
+#define S5P_FIMV_SLICE_INT_MASK		1
+#define S5P_FIMV_SLICE_INT_SHIFT	31
+#define S5P_FIMV_DDELAY_ENA_SHIFT	30
+#define S5P_FIMV_DDELAY_VAL_MASK	0xff
+#define S5P_FIMV_DDELAY_VAL_SHIFT	16
+#define S5P_FIMV_DPB_COUNT_MASK		0xffff
+#define S5P_FIMV_DPB_FLUSH_MASK		1
+#define S5P_FIMV_DPB_FLUSH_SHIFT	14
+
+
+#define S5P_FIMV_SI_CH0_RELEASE_BUF     0x2060 /* DPB release buffer register */
+#define S5P_FIMV_SI_CH0_HOST_WR_ADR	0x2064 /* address of shared memory */
+
+/* Codec numbers  */
+#define S5P_FIMV_CODEC_NONE		-1
+
+#define S5P_FIMV_CODEC_H264_DEC		0
+#define S5P_FIMV_CODEC_VC1_DEC		1
+#define S5P_FIMV_CODEC_MPEG4_DEC	2
+#define S5P_FIMV_CODEC_MPEG2_DEC	3
+#define S5P_FIMV_CODEC_H263_DEC		4
+#define S5P_FIMV_CODEC_VC1RCV_DEC	5
+
+#define S5P_FIMV_CODEC_H264_ENC		16
+#define S5P_FIMV_CODEC_MPEG4_ENC	17
+#define S5P_FIMV_CODEC_H263_ENC		18
+
+/* Channel Control Register */
+#define S5P_FIMV_CH_SEQ_HEADER		1
+#define S5P_FIMV_CH_FRAME_START		2
+#define S5P_FIMV_CH_LAST_FRAME		3
+#define S5P_FIMV_CH_INIT_BUFS		4
+#define S5P_FIMV_CH_FRAME_START_REALLOC	5
+#define S5P_FIMV_CH_MASK		7
+#define S5P_FIMV_CH_SHIFT		16
+
+
+/* Host to RISC command */
+#define S5P_FIMV_H2R_CMD_EMPTY		0
+#define S5P_FIMV_H2R_CMD_OPEN_INSTANCE	1
+#define S5P_FIMV_H2R_CMD_CLOSE_INSTANCE	2
+#define S5P_FIMV_H2R_CMD_SYS_INIT	3
+#define S5P_FIMV_H2R_CMD_FLUSH		4
+#define S5P_FIMV_H2R_CMD_SLEEP		5
+#define S5P_FIMV_H2R_CMD_WAKEUP		6
+
+#define S5P_FIMV_R2H_CMD_EMPTY			0
+#define S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET	1
+#define S5P_FIMV_R2H_CMD_CLOSE_INSTANCE_RET	2
+#define S5P_FIMV_R2H_CMD_RSV_RET		3
+#define S5P_FIMV_R2H_CMD_SEQ_DONE_RET		4
+#define S5P_FIMV_R2H_CMD_FRAME_DONE_RET		5
+#define S5P_FIMV_R2H_CMD_SLICE_DONE_RET		6
+#define S5P_FIMV_R2H_CMD_ENC_COMPLETE_RET	7
+#define S5P_FIMV_R2H_CMD_SYS_INIT_RET		8
+#define S5P_FIMV_R2H_CMD_FW_STATUS_RET		9
+#define S5P_FIMV_R2H_CMD_SLEEP_RET		10
+#define S5P_FIMV_R2H_CMD_WAKEUP_RET		11
+#define S5P_FIMV_R2H_CMD_FLUSH_RET		12
+#define S5P_FIMV_R2H_CMD_INIT_BUFFERS_RET	15
+#define S5P_FIMV_R2H_CMD_EDFU_INIT_RET		16
+#define S5P_FIMV_R2H_CMD_ERR_RET		32
+
+/* Error handling defines */
+#define S5P_FIMV_ERR_WARNINGS_START		145
+#define S5P_FIMV_ERR_DEC_MASK			0xFFFF
+#define S5P_FIMV_ERR_DEC_SHIFT			0
+#define S5P_FIMV_ERR_DSPL_MASK			0xFFFF0000
+#define S5P_FIMV_ERR_DSPL_SHIFT			16
+
+/* Shared memory registers' offsets */
+
+/* An offset of the start position in the stream when
+ * the start position is not aligned */
+#define S5P_FIMV_SHARED_CROP_INFO_H		0x0020
+#define S5P_FIMV_SHARED_CROP_LEFT_MASK		0xFFFF
+#define S5P_FIMV_SHARED_CROP_LEFT_SHIFT		0
+#define S5P_FIMV_SHARED_CROP_RIGHT_MASK		0xFFFF0000
+#define S5P_FIMV_SHARED_CROP_RIGHT_SHIFT	16
+#define S5P_FIMV_SHARED_CROP_INFO_V		0x0024
+#define S5P_FIMV_SHARED_CROP_TOP_MASK		0xFFFF
+#define S5P_FIMV_SHARED_CROP_TOP_SHIFT		0
+#define S5P_FIMV_SHARED_CROP_BOTTOM_MASK	0xFFFF0000
+#define S5P_FIMV_SHARED_CROP_BOTTOM_SHIFT	16
+#define S5P_FIMV_SHARED_SET_FRAME_TAG		0x0004
+#define S5P_FIMV_SHARED_GET_FRAME_TAG_TOP	0x0008
+#define S5P_FIMV_SHARED_GET_FRAME_TAG_BOT	0x000C
+#define S5P_FIMV_SHARED_START_BYTE_NUM		0x0018
+#define S5P_FIMV_SHARED_RC_VOP_TIMING		0x0030
+#define S5P_FIMV_SHARED_LUMA_DPB_SIZE		0x0064
+#define S5P_FIMV_SHARED_CHROMA_DPB_SIZE		0x0068
+#define S5P_FIMV_SHARED_MV_SIZE			0x006C
+#define S5P_FIMV_SHARED_PIC_TIME_TOP		0x0010
+#define S5P_FIMV_SHARED_PIC_TIME_BOTTOM		0x0014
+#define S5P_FIMV_SHARED_EXT_ENC_CONTROL		0x0028
+#define S5P_FIMV_SHARED_P_B_FRAME_QP		0x0070
+#define S5P_FIMV_SHARED_ASPECT_RATIO_IDC	0x0074
+#define S5P_FIMV_SHARED_EXTENDED_SAR		0x0078
+#define S5P_FIMV_SHARED_H264_I_PERIOD		0x009C
+#define S5P_FIMV_SHARED_RC_CONTROL_CONFIG	0x00A0
+
+#endif /* _REGS_FIMV_H */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc.c b/drivers/media/video/s5p-mfc/s5p_mfc.c
new file mode 100644
index 0000000..7dc7eab
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc.c
@@ -0,0 +1,1274 @@
+/*
+ * Samsung S5P Multi Format Codec v 5.1
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Kamil Debski, <k.debski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
+#include <linux/workqueue.h>
+#include <media/videobuf2-core.h>
+#include "regs-mfc.h"
+#include "s5p_mfc_ctrl.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_dec.h"
+#include "s5p_mfc_enc.h"
+#include "s5p_mfc_intr.h"
+#include "s5p_mfc_opr.h"
+#include "s5p_mfc_pm.h"
+#include "s5p_mfc_shm.h"
+
+#define S5P_MFC_NAME		"s5p-mfc"
+#define S5P_MFC_DEC_NAME	"s5p-mfc-dec"
+#define S5P_MFC_ENC_NAME	"s5p-mfc-enc"
+
+int debug;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level - higher value produces more verbose messages");
+
+/* Helper functions for interrupt processing */
+/* Remove from hw execution round robin */
+static void clear_work_bit(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	spin_lock(&dev->condlock);
+	clear_bit(ctx->num, &dev->ctx_work_bits);
+	spin_unlock(&dev->condlock);
+}
+
+/* Wake up context wait_queue */
+static void wake_up_ctx(struct s5p_mfc_ctx *ctx, unsigned int reason,
+			unsigned int err)
+{
+	ctx->int_cond = 1;
+	ctx->int_type = reason;
+	ctx->int_err = err;
+	wake_up(&ctx->queue);
+}
+
+/* Wake up device wait_queue */
+static void wake_up_dev(struct s5p_mfc_dev *dev, unsigned int reason,
+			unsigned int err)
+{
+	dev->int_cond = 1;
+	dev->int_type = reason;
+	dev->int_err = err;
+	wake_up(&dev->queue);
+}
+
+void s5p_mfc_watchdog(unsigned long arg)
+{
+	struct s5p_mfc_dev *dev = (struct s5p_mfc_dev *)arg;
+
+	if (test_bit(0, &dev->hw_lock))
+		atomic_inc(&dev->watchdog_cnt);
+	if (atomic_read(&dev->watchdog_cnt) >= MFC_WATCHDOG_CNT) {
+		/* This means that hw is busy and no interrupts were
+		 * generated by hw for the Nth time of running this
+		 * watchdog timer. This usually means a serious hw
+		 * error. Now it is time to kill all instances and
+		 * reset the MFC. */
+		mfc_err("Time out during waiting for HW\n");
+		queue_work(dev->watchdog_workqueue, &dev->watchdog_work);
+	}
+	dev->watchdog_timer.expires = jiffies +
+					msecs_to_jiffies(MFC_WATCHDOG_INTERVAL);
+	add_timer(&dev->watchdog_timer);
+}
+
+static void s5p_mfc_watchdog_worker(struct work_struct *work)
+{
+	struct s5p_mfc_dev *dev;
+	struct s5p_mfc_ctx *ctx;
+	unsigned long flags;
+	int mutex_locked;
+	int i, ret;
+
+	dev = container_of(work, struct s5p_mfc_dev, watchdog_work);
+
+	mfc_err("Driver timeout error handling\n");
+	/* Lock the mutex that protects open and release.
+	 * This is necessary as they may load and unload firmware. */
+	mutex_locked = mutex_trylock(&dev->mfc_mutex);
+	if (!mutex_locked)
+		mfc_err("Error: some instance may be closing/opening\n");
+	spin_lock_irqsave(&dev->irqlock, flags);
+
+	s5p_mfc_clock_off();
+
+	for (i = 0; i < MFC_NUM_CONTEXTS; i++) {
+		ctx = dev->ctx[i];
+		if (!ctx)
+			continue;
+		ctx->state = MFCINST_ERROR;
+		s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst);
+		s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src);
+		clear_work_bit(ctx);
+		wake_up_ctx(ctx, S5P_FIMV_R2H_CMD_ERR_RET, 0);
+	}
+	clear_bit(0, &dev->hw_lock);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	/* Double check if there is at least one instance running.
+	 * If no instance is in memory than no firmware should be present */
+	if (dev->num_inst > 0) {
+		ret = s5p_mfc_reload_firmware(dev);
+		if (ret) {
+			mfc_err("Failed to reload FW\n");
+			goto unlock;
+		}
+		s5p_mfc_clock_on();
+		ret = s5p_mfc_init_hw(dev);
+		if (ret)
+			mfc_err("Failed to reinit FW\n");
+	}
+unlock:
+	if (mutex_locked)
+		mutex_unlock(&dev->mfc_mutex);
+}
+
+static enum s5p_mfc_node_type s5p_mfc_get_node_type(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (!vdev) {
+		mfc_err("failed to get video_device");
+		return MFCNODE_INVALID;
+	}
+	if (vdev->index == 0)
+		return MFCNODE_DECODER;
+	else if (vdev->index == 1)
+		return MFCNODE_ENCODER;
+	return MFCNODE_INVALID;
+}
+
+static void s5p_mfc_clear_int_flags(struct s5p_mfc_dev *dev)
+{
+	mfc_write(dev, 0, S5P_FIMV_RISC_HOST_INT);
+	mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD);
+	mfc_write(dev, 0xffff, S5P_FIMV_SI_RTN_CHID);
+}
+
+static void s5p_mfc_handle_frame_all_extracted(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_buf *dst_buf;
+
+	ctx->state = MFCINST_FINISHED;
+	ctx->sequence++;
+	while (!list_empty(&ctx->dst_queue)) {
+		dst_buf = list_entry(ctx->dst_queue.next,
+				     struct s5p_mfc_buf, list);
+		mfc_debug(2, "Cleaning up buffer: %d\n",
+					  dst_buf->b->v4l2_buf.index);
+		vb2_set_plane_payload(dst_buf->b, 0, 0);
+		vb2_set_plane_payload(dst_buf->b, 1, 0);
+		list_del(&dst_buf->list);
+		ctx->dst_queue_cnt--;
+		dst_buf->b->v4l2_buf.sequence = (ctx->sequence++);
+
+		if (s5p_mfc_read_shm(ctx, PIC_TIME_TOP) ==
+			s5p_mfc_read_shm(ctx, PIC_TIME_BOT))
+			dst_buf->b->v4l2_buf.field = V4L2_FIELD_NONE;
+		else
+			dst_buf->b->v4l2_buf.field = V4L2_FIELD_INTERLACED;
+
+		ctx->dec_dst_flag &= ~(1 << dst_buf->b->v4l2_buf.index);
+		vb2_buffer_done(dst_buf->b, VB2_BUF_STATE_DONE);
+	}
+}
+
+static void s5p_mfc_handle_frame_copy_time(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf  *dst_buf, *src_buf;
+	size_t dec_y_addr = s5p_mfc_get_dec_y_adr();
+	unsigned int frame_type = s5p_mfc_get_frame_type();
+
+	/* Copy timestamp / timecode from decoded src to dst and set
+	   appropraite flags */
+	src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	list_for_each_entry(dst_buf, &ctx->dst_queue, list) {
+		if (vb2_dma_contig_plane_paddr(dst_buf->b, 0) == dec_y_addr) {
+			memcpy(&dst_buf->b->v4l2_buf.timecode,
+				&src_buf->b->v4l2_buf.timecode,
+				sizeof(struct v4l2_timecode));
+			memcpy(&dst_buf->b->v4l2_buf.timestamp,
+				&src_buf->b->v4l2_buf.timestamp,
+				sizeof(struct timeval));
+			switch (frame_type) {
+			case S5P_FIMV_DECODE_FRAME_I_FRAME:
+				dst_buf->b->v4l2_buf.flags |=
+						V4L2_BUF_FLAG_KEYFRAME;
+				break;
+			case S5P_FIMV_DECODE_FRAME_P_FRAME:
+				dst_buf->b->v4l2_buf.flags |=
+						V4L2_BUF_FLAG_PFRAME;
+				break;
+			case S5P_FIMV_DECODE_FRAME_B_FRAME:
+				dst_buf->b->v4l2_buf.flags |=
+						V4L2_BUF_FLAG_BFRAME;
+				break;
+			}
+			break;
+		}
+	}
+}
+
+static void s5p_mfc_handle_frame_new(struct s5p_mfc_ctx *ctx, unsigned int err)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf  *dst_buf;
+	size_t dspl_y_addr = s5p_mfc_get_dspl_y_adr();
+	unsigned int frame_type = s5p_mfc_get_frame_type();
+	unsigned int index;
+
+	/* If frame is same as previous then skip and do not dequeue */
+	if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED) {
+		if (!ctx->after_packed_pb)
+			ctx->sequence++;
+		ctx->after_packed_pb = 0;
+		return;
+	}
+	ctx->sequence++;
+	/* The MFC returns address of the buffer, now we have to
+	 * check which videobuf does it correspond to */
+	list_for_each_entry(dst_buf, &ctx->dst_queue, list) {
+		/* Check if this is the buffer we're looking for */
+		if (vb2_dma_contig_plane_paddr(dst_buf->b, 0) == dspl_y_addr) {
+			list_del(&dst_buf->list);
+			ctx->dst_queue_cnt--;
+			dst_buf->b->v4l2_buf.sequence = ctx->sequence;
+			if (s5p_mfc_read_shm(ctx, PIC_TIME_TOP) ==
+				s5p_mfc_read_shm(ctx, PIC_TIME_BOT))
+				dst_buf->b->v4l2_buf.field = V4L2_FIELD_NONE;
+			else
+				dst_buf->b->v4l2_buf.field =
+							V4L2_FIELD_INTERLACED;
+			vb2_set_plane_payload(dst_buf->b, 0, ctx->luma_size);
+			vb2_set_plane_payload(dst_buf->b, 1, ctx->chroma_size);
+			clear_bit(dst_buf->b->v4l2_buf.index,
+							&ctx->dec_dst_flag);
+
+			vb2_buffer_done(dst_buf->b,
+				err ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+
+			index = dst_buf->b->v4l2_buf.index;
+			break;
+		}
+	}
+}
+
+/* Handle frame decoding interrupt */
+static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx,
+					unsigned int reason, unsigned int err)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned int dst_frame_status;
+	struct s5p_mfc_buf *src_buf;
+	unsigned long flags;
+	unsigned int res_change;
+
+	unsigned int index;
+
+	dst_frame_status = s5p_mfc_get_dspl_status()
+				& S5P_FIMV_DEC_STATUS_DECODING_STATUS_MASK;
+	res_change = s5p_mfc_get_dspl_status()
+				& S5P_FIMV_DEC_STATUS_RESOLUTION_MASK;
+	mfc_debug(2, "Frame Status: %x\n", dst_frame_status);
+	if (ctx->state == MFCINST_RES_CHANGE_INIT)
+		ctx->state = MFCINST_RES_CHANGE_FLUSH;
+	if (res_change) {
+		ctx->state = MFCINST_RES_CHANGE_INIT;
+		s5p_mfc_clear_int_flags(dev);
+		wake_up_ctx(ctx, reason, err);
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			BUG();
+		s5p_mfc_clock_off();
+		s5p_mfc_try_run(dev);
+		return;
+	}
+	if (ctx->dpb_flush_flag)
+		ctx->dpb_flush_flag = 0;
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	/* All frames remaining in the buffer have been extracted  */
+	if (dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_EMPTY) {
+		if (ctx->state == MFCINST_RES_CHANGE_FLUSH) {
+			s5p_mfc_handle_frame_all_extracted(ctx);
+			ctx->state = MFCINST_RES_CHANGE_END;
+			goto leave_handle_frame;
+		} else {
+			s5p_mfc_handle_frame_all_extracted(ctx);
+		}
+	}
+
+	if (dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_DISPLAY ||
+		dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_ONLY)
+		s5p_mfc_handle_frame_copy_time(ctx);
+
+	/* A frame has been decoded and is in the buffer  */
+	if (dst_frame_status == S5P_FIMV_DEC_STATUS_DISPLAY_ONLY ||
+	    dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_DISPLAY) {
+		s5p_mfc_handle_frame_new(ctx, err);
+	} else {
+		mfc_debug(2, "No frame decode\n");
+	}
+	/* Mark source buffer as complete */
+	if (dst_frame_status != S5P_FIMV_DEC_STATUS_DISPLAY_ONLY
+		&& !list_empty(&ctx->src_queue)) {
+		src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf,
+								list);
+		ctx->consumed_stream += s5p_mfc_get_consumed_stream();
+		if (ctx->codec_mode != S5P_FIMV_CODEC_H264_DEC &&
+			s5p_mfc_get_frame_type() == S5P_FIMV_DECODE_FRAME_P_FRAME
+					&& ctx->consumed_stream + STUFF_BYTE <
+					src_buf->b->v4l2_planes[0].bytesused) {
+			/* Run MFC again on the same buffer */
+			mfc_debug(2, "Running again the same buffer\n");
+			ctx->after_packed_pb = 1;
+		} else {
+			index = src_buf->b->v4l2_buf.index;
+			mfc_debug(2, "MFC needs next buffer\n");
+			ctx->consumed_stream = 0;
+			list_del(&src_buf->list);
+			ctx->src_queue_cnt--;
+			if (s5p_mfc_err_dec(err) > 0)
+				vb2_buffer_done(src_buf->b, VB2_BUF_STATE_ERROR);
+			else
+				vb2_buffer_done(src_buf->b, VB2_BUF_STATE_DONE);
+		}
+	}
+leave_handle_frame:
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	if ((ctx->src_queue_cnt == 0 && ctx->state != MFCINST_FINISHING)
+				    || ctx->dst_queue_cnt < ctx->dpb_count)
+		clear_work_bit(ctx);
+	s5p_mfc_clear_int_flags(dev);
+	wake_up_ctx(ctx, reason, err);
+	if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+		BUG();
+	s5p_mfc_clock_off();
+	s5p_mfc_try_run(dev);
+}
+
+/* Error handling for interrupt */
+static void s5p_mfc_handle_error(struct s5p_mfc_ctx *ctx,
+				 unsigned int reason, unsigned int err)
+{
+	struct s5p_mfc_dev *dev;
+	unsigned long flags;
+
+	/* If no context is available then all necessary
+	 * processing has been done. */
+	if (ctx == 0)
+		return;
+
+	dev = ctx->dev;
+	mfc_err("Interrupt Error: %08x\n", err);
+	s5p_mfc_clear_int_flags(dev);
+	wake_up_dev(dev, reason, err);
+
+	/* Error recovery is dependent on the state of context */
+	switch (ctx->state) {
+	case MFCINST_INIT:
+		/* This error had to happen while acquireing instance */
+	case MFCINST_GOT_INST:
+		/* This error had to happen while parsing the header */
+	case MFCINST_HEAD_PARSED:
+		/* This error had to happen while setting dst buffers */
+	case MFCINST_RETURN_INST:
+		/* This error had to happen while releasing instance */
+		clear_work_bit(ctx);
+		wake_up_ctx(ctx, reason, err);
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			BUG();
+		s5p_mfc_clock_off();
+		ctx->state = MFCINST_ERROR;
+		break;
+	case MFCINST_FINISHING:
+	case MFCINST_FINISHED:
+	case MFCINST_RUNNING:
+		/* It is higly probable that an error occured
+		 * while decoding a frame */
+		clear_work_bit(ctx);
+		ctx->state = MFCINST_ERROR;
+		/* Mark all dst buffers as having an error */
+		spin_lock_irqsave(&dev->irqlock, flags);
+		s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst);
+		/* Mark all src buffers as having an error */
+		s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src);
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			BUG();
+		s5p_mfc_clock_off();
+		break;
+	default:
+		mfc_err("Encountered an error interrupt which had not been handled\n");
+		break;
+	}
+	return;
+}
+
+/* Header parsing interrupt handling */
+static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx,
+				 unsigned int reason, unsigned int err)
+{
+	struct s5p_mfc_dev *dev;
+	unsigned int guard_width, guard_height;
+
+	if (ctx == 0)
+		return;
+	dev = ctx->dev;
+	if (ctx->c_ops->post_seq_start) {
+		if (ctx->c_ops->post_seq_start(ctx))
+			mfc_err("post_seq_start() failed\n");
+	} else {
+		ctx->img_width = s5p_mfc_get_img_width();
+		ctx->img_height = s5p_mfc_get_img_height();
+
+		ctx->buf_width = ALIGN(ctx->img_width,
+						S5P_FIMV_NV12MT_HALIGN);
+		ctx->buf_height = ALIGN(ctx->img_height,
+						S5P_FIMV_NV12MT_VALIGN);
+		mfc_debug(2, "SEQ Done: Movie dimensions %dx%d, "
+			"buffer dimensions: %dx%d\n", ctx->img_width,
+				ctx->img_height, ctx->buf_width,
+						ctx->buf_height);
+		if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC) {
+			ctx->luma_size = ALIGN(ctx->buf_width *
+				ctx->buf_height, S5P_FIMV_DEC_BUF_ALIGN);
+			ctx->chroma_size = ALIGN(ctx->buf_width *
+					 ALIGN((ctx->img_height >> 1),
+					       S5P_FIMV_NV12MT_VALIGN),
+					       S5P_FIMV_DEC_BUF_ALIGN);
+			ctx->mv_size = ALIGN(ctx->buf_width *
+					ALIGN((ctx->buf_height >> 2),
+					S5P_FIMV_NV12MT_VALIGN),
+					S5P_FIMV_DEC_BUF_ALIGN);
+		} else {
+			guard_width = ALIGN(ctx->img_width + 24,
+					S5P_FIMV_NV12MT_HALIGN);
+			guard_height = ALIGN(ctx->img_height + 16,
+						S5P_FIMV_NV12MT_VALIGN);
+			ctx->luma_size = ALIGN(guard_width *
+				guard_height, S5P_FIMV_DEC_BUF_ALIGN);
+			guard_width = ALIGN(ctx->img_width + 16,
+						S5P_FIMV_NV12MT_HALIGN);
+			guard_height = ALIGN((ctx->img_height >> 1) + 4,
+						S5P_FIMV_NV12MT_VALIGN);
+			ctx->chroma_size = ALIGN(guard_width *
+				guard_height, S5P_FIMV_DEC_BUF_ALIGN);
+			ctx->mv_size = 0;
+		}
+		ctx->dpb_count = s5p_mfc_get_dpb_count();
+		if (ctx->img_width == 0 || ctx->img_width == 0)
+			ctx->state = MFCINST_ERROR;
+		else
+			ctx->state = MFCINST_HEAD_PARSED;
+	}
+	s5p_mfc_clear_int_flags(dev);
+	clear_work_bit(ctx);
+	if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+		BUG();
+	s5p_mfc_clock_off();
+	s5p_mfc_try_run(dev);
+	wake_up_ctx(ctx, reason, err);
+}
+
+/* Header parsing interrupt handling */
+static void s5p_mfc_handle_init_buffers(struct s5p_mfc_ctx *ctx,
+				 unsigned int reason, unsigned int err)
+{
+	struct s5p_mfc_buf *src_buf;
+	struct s5p_mfc_dev *dev;
+	unsigned long flags;
+
+	if (ctx == 0)
+		return;
+	dev = ctx->dev;
+	s5p_mfc_clear_int_flags(dev);
+	ctx->int_type = reason;
+	ctx->int_err = err;
+	ctx->int_cond = 1;
+	spin_lock(&dev->condlock);
+	clear_bit(ctx->num, &dev->ctx_work_bits);
+	spin_unlock(&dev->condlock);
+	if (err == 0) {
+		ctx->state = MFCINST_RUNNING;
+		if (!ctx->dpb_flush_flag) {
+			spin_lock_irqsave(&dev->irqlock, flags);
+			if (!list_empty(&ctx->src_queue)) {
+				src_buf = list_entry(ctx->src_queue.next,
+					     struct s5p_mfc_buf, list);
+				list_del(&src_buf->list);
+				ctx->src_queue_cnt--;
+				vb2_buffer_done(src_buf->b,
+						VB2_BUF_STATE_DONE);
+			}
+			spin_unlock_irqrestore(&dev->irqlock, flags);
+		} else {
+			ctx->dpb_flush_flag = 0;
+		}
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			BUG();
+
+		s5p_mfc_clock_off();
+
+		wake_up(&ctx->queue);
+		s5p_mfc_try_run(dev);
+	} else {
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			BUG();
+
+		s5p_mfc_clock_off();
+
+		wake_up(&ctx->queue);
+	}
+}
+
+/* Interrupt processing */
+static irqreturn_t s5p_mfc_irq(int irq, void *priv)
+{
+	struct s5p_mfc_dev *dev = priv;
+	struct s5p_mfc_ctx *ctx;
+	unsigned int reason;
+	unsigned int err;
+
+	mfc_debug_enter();
+	/* Reset the timeout watchdog */
+	atomic_set(&dev->watchdog_cnt, 0);
+	ctx = dev->ctx[dev->curr_ctx];
+	/* Get the reason of interrupt and the error code */
+	reason = s5p_mfc_get_int_reason();
+	err = s5p_mfc_get_int_err();
+	mfc_debug(1, "Int reason: %d (err: %08x)\n", reason, err);
+	switch (reason) {
+	case S5P_FIMV_R2H_CMD_ERR_RET:
+		/* An error has occured */
+		if (ctx->state == MFCINST_RUNNING &&
+			s5p_mfc_err_dec(err) >= S5P_FIMV_ERR_WARNINGS_START)
+			s5p_mfc_handle_frame(ctx, reason, err);
+		else
+			s5p_mfc_handle_error(ctx, reason, err);
+		clear_bit(0, &dev->enter_suspend);
+		break;
+
+	case S5P_FIMV_R2H_CMD_SLICE_DONE_RET:
+	case S5P_FIMV_R2H_CMD_FRAME_DONE_RET:
+		if (ctx->c_ops->post_frame_start) {
+			if (ctx->c_ops->post_frame_start(ctx))
+				mfc_err("post_frame_start() failed\n");
+			s5p_mfc_clear_int_flags(dev);
+			wake_up_ctx(ctx, reason, err);
+			if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+				BUG();
+			s5p_mfc_clock_off();
+			s5p_mfc_try_run(dev);
+		} else {
+			s5p_mfc_handle_frame(ctx, reason, err);
+		}
+		break;
+
+	case S5P_FIMV_R2H_CMD_SEQ_DONE_RET:
+		s5p_mfc_handle_seq_done(ctx, reason, err);
+		break;
+
+	case S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET:
+		ctx->inst_no = s5p_mfc_get_inst_no();
+		ctx->state = MFCINST_GOT_INST;
+		clear_work_bit(ctx);
+		wake_up(&ctx->queue);
+		goto irq_cleanup_hw;
+
+	case S5P_FIMV_R2H_CMD_CLOSE_INSTANCE_RET:
+		clear_work_bit(ctx);
+		ctx->state = MFCINST_FREE;
+		wake_up(&ctx->queue);
+		goto irq_cleanup_hw;
+
+	case S5P_FIMV_R2H_CMD_SYS_INIT_RET:
+	case S5P_FIMV_R2H_CMD_FW_STATUS_RET:
+	case S5P_FIMV_R2H_CMD_SLEEP_RET:
+	case S5P_FIMV_R2H_CMD_WAKEUP_RET:
+		if (ctx)
+			clear_work_bit(ctx);
+		s5p_mfc_clear_int_flags(dev);
+		wake_up_dev(dev, reason, err);
+		clear_bit(0, &dev->hw_lock);
+		clear_bit(0, &dev->enter_suspend);
+		break;
+
+	case S5P_FIMV_R2H_CMD_INIT_BUFFERS_RET:
+		s5p_mfc_handle_init_buffers(ctx, reason, err);
+		break;
+	default:
+		mfc_debug(2, "Unknown int reason\n");
+		s5p_mfc_clear_int_flags(dev);
+	}
+	mfc_debug_leave();
+	return IRQ_HANDLED;
+irq_cleanup_hw:
+	s5p_mfc_clear_int_flags(dev);
+	ctx->int_type = reason;
+	ctx->int_err = err;
+	ctx->int_cond = 1;
+	if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+		mfc_err("Failed to unlock hw\n");
+
+	s5p_mfc_clock_off();
+
+	s5p_mfc_try_run(dev);
+	mfc_debug(2, "Exit via irq_cleanup_hw\n");
+	return IRQ_HANDLED;
+}
+
+/* Open an MFC node */
+static int s5p_mfc_open(struct file *file)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+	struct s5p_mfc_ctx *ctx = NULL;
+	struct vb2_queue *q;
+	unsigned long flags;
+	int ret = 0;
+
+	mfc_debug_enter();
+	dev->num_inst++;	/* It is guarded by mfc_mutex in vfd */
+	/* Allocate memory for context */
+	ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
+	if (!ctx) {
+		mfc_err("Not enough memory\n");
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+	v4l2_fh_init(&ctx->fh, video_devdata(file));
+	file->private_data = &ctx->fh;
+	v4l2_fh_add(&ctx->fh);
+	ctx->dev = dev;
+	INIT_LIST_HEAD(&ctx->src_queue);
+	INIT_LIST_HEAD(&ctx->dst_queue);
+	ctx->src_queue_cnt = 0;
+	ctx->dst_queue_cnt = 0;
+	/* Get context number */
+	ctx->num = 0;
+	while (dev->ctx[ctx->num]) {
+		ctx->num++;
+		if (ctx->num >= MFC_NUM_CONTEXTS) {
+			mfc_err("Too many open contexts\n");
+			ret = -EBUSY;
+			goto err_no_ctx;
+		}
+	}
+	/* Mark context as idle */
+	spin_lock_irqsave(&dev->condlock, flags);
+	clear_bit(ctx->num, &dev->ctx_work_bits);
+	spin_unlock_irqrestore(&dev->condlock, flags);
+	dev->ctx[ctx->num] = ctx;
+	if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+		ctx->type = MFCINST_DECODER;
+		ctx->c_ops = get_dec_codec_ops();
+		/* Setup ctrl handler */
+		ret = s5p_mfc_dec_ctrls_setup(ctx);
+		if (ret) {
+			mfc_err("Failed to setup mfc controls\n");
+			goto err_ctrls_setup;
+		}
+	} else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+		ctx->type = MFCINST_ENCODER;
+		ctx->c_ops = get_enc_codec_ops();
+		/* only for encoder */
+		INIT_LIST_HEAD(&ctx->ref_queue);
+		ctx->ref_queue_cnt = 0;
+		/* Setup ctrl handler */
+		ret = s5p_mfc_enc_ctrls_setup(ctx);
+		if (ret) {
+			mfc_err("Failed to setup mfc controls\n");
+			goto err_ctrls_setup;
+		}
+	} else {
+		ret = -ENOENT;
+		goto err_bad_node;
+	}
+	ctx->fh.ctrl_handler = &ctx->ctrl_handler;
+	ctx->inst_no = -1;
+	/* Load firmware if this is the first instance */
+	if (dev->num_inst == 1) {
+		dev->watchdog_timer.expires = jiffies +
+					msecs_to_jiffies(MFC_WATCHDOG_INTERVAL);
+		add_timer(&dev->watchdog_timer);
+		ret = s5p_mfc_power_on();
+		if (ret < 0) {
+			mfc_err("power on failed\n");
+			goto err_pwr_enable;
+		}
+		s5p_mfc_clock_on();
+		ret = s5p_mfc_alloc_and_load_firmware(dev);
+		if (ret)
+			goto err_alloc_fw;
+		/* Init the FW */
+		ret = s5p_mfc_init_hw(dev);
+		if (ret)
+			goto err_init_hw;
+		s5p_mfc_clock_off();
+	}
+	/* Init videobuf2 queue for CAPTURE */
+	q = &ctx->vq_dst;
+	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+	q->drv_priv = &ctx->fh;
+	if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+		q->io_modes = VB2_MMAP;
+		q->ops = get_dec_queue_ops();
+	} else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+		q->io_modes = VB2_MMAP | VB2_USERPTR;
+		q->ops = get_enc_queue_ops();
+	} else {
+		ret = -ENOENT;
+		goto err_queue_init;
+	}
+	q->mem_ops = (struct vb2_mem_ops *)&vb2_dma_contig_memops;
+	ret = vb2_queue_init(q);
+	if (ret) {
+		mfc_err("Failed to initialize videobuf2 queue(capture)\n");
+		goto err_queue_init;
+	}
+	/* Init videobuf2 queue for OUTPUT */
+	q = &ctx->vq_src;
+	q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+	q->io_modes = VB2_MMAP;
+	q->drv_priv = &ctx->fh;
+	if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+		q->io_modes = VB2_MMAP;
+		q->ops = get_dec_queue_ops();
+	} else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+		q->io_modes = VB2_MMAP | VB2_USERPTR;
+		q->ops = get_enc_queue_ops();
+	} else {
+		ret = -ENOENT;
+		goto err_queue_init;
+	}
+	q->mem_ops = (struct vb2_mem_ops *)&vb2_dma_contig_memops;
+	ret = vb2_queue_init(q);
+	if (ret) {
+		mfc_err("Failed to initialize videobuf2 queue(output)\n");
+		goto err_queue_init;
+	}
+	init_waitqueue_head(&ctx->queue);
+	mfc_debug_leave();
+	return ret;
+	/* Deinit when failure occured */
+err_queue_init:
+err_init_hw:
+	s5p_mfc_release_firmware(dev);
+err_alloc_fw:
+	dev->ctx[ctx->num] = 0;
+	del_timer_sync(&dev->watchdog_timer);
+	s5p_mfc_clock_off();
+err_pwr_enable:
+	if (dev->num_inst == 1) {
+		if (s5p_mfc_power_off() < 0)
+			mfc_err("power off failed\n");
+		s5p_mfc_release_firmware(dev);
+	}
+err_ctrls_setup:
+	s5p_mfc_dec_ctrls_delete(ctx);
+err_bad_node:
+err_no_ctx:
+	v4l2_fh_del(&ctx->fh);
+	v4l2_fh_exit(&ctx->fh);
+	kfree(ctx);
+err_alloc:
+	dev->num_inst--;
+	mfc_debug_leave();
+	return ret;
+}
+
+/* Release MFC context */
+static int s5p_mfc_release(struct file *file)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+
+	mfc_debug_enter();
+	s5p_mfc_clock_on();
+	vb2_queue_release(&ctx->vq_src);
+	vb2_queue_release(&ctx->vq_dst);
+	/* Mark context as idle */
+	spin_lock_irqsave(&dev->condlock, flags);
+	clear_bit(ctx->num, &dev->ctx_work_bits);
+	spin_unlock_irqrestore(&dev->condlock, flags);
+	/* If instance was initialised then
+	 * return instance and free reosurces */
+	if (ctx->inst_no != MFC_NO_INSTANCE_SET) {
+		mfc_debug(2, "Has to free instance\n");
+		ctx->state = MFCINST_RETURN_INST;
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+		s5p_mfc_clean_ctx_int_flags(ctx);
+		s5p_mfc_try_run(dev);
+		/* Wait until instance is returned or timeout occured */
+		if (s5p_mfc_wait_for_done_ctx
+		    (ctx, S5P_FIMV_R2H_CMD_CLOSE_INSTANCE_RET, 0)) {
+			s5p_mfc_clock_off();
+			mfc_err("Err returning instance\n");
+		}
+		mfc_debug(2, "After free instance\n");
+		/* Free resources */
+		s5p_mfc_release_codec_buffers(ctx);
+		s5p_mfc_release_instance_buffer(ctx);
+		if (ctx->type == MFCINST_DECODER)
+			s5p_mfc_release_dec_desc_buffer(ctx);
+
+		ctx->inst_no = MFC_NO_INSTANCE_SET;
+	}
+	/* hardware locking scheme */
+	if (dev->curr_ctx == ctx->num)
+		clear_bit(0, &dev->hw_lock);
+	dev->num_inst--;
+	if (dev->num_inst == 0) {
+		mfc_debug(2, "Last instance - release firmware\n");
+		/* reset <-> F/W release */
+		s5p_mfc_reset(dev);
+		s5p_mfc_release_firmware(dev);
+		del_timer_sync(&dev->watchdog_timer);
+		if (s5p_mfc_power_off() < 0)
+			mfc_err("Power off failed\n");
+	}
+	mfc_debug(2, "Shutting down clock\n");
+	s5p_mfc_clock_off();
+	dev->ctx[ctx->num] = 0;
+	s5p_mfc_dec_ctrls_delete(ctx);
+	v4l2_fh_del(&ctx->fh);
+	v4l2_fh_exit(&ctx->fh);
+	kfree(ctx);
+	mfc_debug_leave();
+	return 0;
+}
+
+/* Poll */
+static unsigned int s5p_mfc_poll(struct file *file,
+				 struct poll_table_struct *wait)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct vb2_queue *src_q, *dst_q;
+	struct vb2_buffer *src_vb = NULL, *dst_vb = NULL;
+	unsigned int rc = 0;
+	unsigned long flags;
+
+	src_q = &ctx->vq_src;
+	dst_q = &ctx->vq_dst;
+	/*
+	 * There has to be at least one buffer queued on each queued_list, which
+	 * means either in driver already or waiting for driver to claim it
+	 * and start processing.
+	 */
+	if ((!src_q->streaming || list_empty(&src_q->queued_list))
+		&& (!dst_q->streaming || list_empty(&dst_q->queued_list))) {
+		rc = POLLERR;
+		goto end;
+	}
+	mutex_unlock(&dev->mfc_mutex);
+	poll_wait(file, &src_q->done_wq, wait);
+	poll_wait(file, &dst_q->done_wq, wait);
+	mutex_lock(&dev->mfc_mutex);
+	spin_lock_irqsave(&src_q->done_lock, flags);
+	if (!list_empty(&src_q->done_list))
+		src_vb = list_first_entry(&src_q->done_list, struct vb2_buffer,
+								done_entry);
+	if (src_vb && (src_vb->state == VB2_BUF_STATE_DONE
+				|| src_vb->state == VB2_BUF_STATE_ERROR))
+		rc |= POLLOUT | POLLWRNORM;
+	spin_unlock_irqrestore(&src_q->done_lock, flags);
+	spin_lock_irqsave(&dst_q->done_lock, flags);
+	if (!list_empty(&dst_q->done_list))
+		dst_vb = list_first_entry(&dst_q->done_list, struct vb2_buffer,
+								done_entry);
+	if (dst_vb && (dst_vb->state == VB2_BUF_STATE_DONE
+				|| dst_vb->state == VB2_BUF_STATE_ERROR))
+		rc |= POLLIN | POLLRDNORM;
+	spin_unlock_irqrestore(&dst_q->done_lock, flags);
+end:
+	return rc;
+}
+
+/* Mmap */
+static int s5p_mfc_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data);
+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	int ret;
+	if (offset < DST_QUEUE_OFF_BASE) {
+		mfc_debug(2, "mmaping source\n");
+		ret = vb2_mmap(&ctx->vq_src, vma);
+	} else {		/* capture */
+		mfc_debug(2, "mmaping destination\n");
+		vma->vm_pgoff -= (DST_QUEUE_OFF_BASE >> PAGE_SHIFT);
+		ret = vb2_mmap(&ctx->vq_dst, vma);
+	}
+	return ret;
+}
+
+/* v4l2 ops */
+static const struct v4l2_file_operations s5p_mfc_fops = {
+	.owner = THIS_MODULE,
+	.open = s5p_mfc_open,
+	.release = s5p_mfc_release,
+	.poll = s5p_mfc_poll,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = s5p_mfc_mmap,
+};
+
+static int match_child(struct device *dev, void *data)
+{
+	if (!dev_name(dev))
+		return 0;
+	return !strcmp(dev_name(dev), (char *)data);
+}
+
+
+/* MFC probe function */
+static int __devinit s5p_mfc_probe(struct platform_device *pdev)
+{
+	struct s5p_mfc_dev *dev;
+	struct video_device *vfd;
+	struct resource *res;
+	int ret;
+
+	pr_debug("%s++\n", __func__);
+	dev = kzalloc(sizeof *dev, GFP_KERNEL);
+	if (!dev) {
+		dev_err(&pdev->dev, "Not enough memory for MFC device\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&dev->irqlock);
+	spin_lock_init(&dev->condlock);
+	dev->plat_dev = pdev;
+	if (!dev->plat_dev) {
+		dev_err(&pdev->dev, "No platform data specified\n");
+		ret = -ENODEV;
+		goto err_dev;
+	}
+
+	ret = s5p_mfc_init_pm(dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get mfc clock source\n");
+		goto err_clk;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to get memory region resource\n");
+		ret = -ENOENT;
+		goto err_res;
+	}
+
+	dev->mfc_mem = request_mem_region(res->start, resource_size(res),
+					  pdev->name);
+	if (dev->mfc_mem == NULL) {
+		dev_err(&pdev->dev, "failed to get memory region\n");
+		ret = -ENOENT;
+		goto err_mem_reg;
+	}
+	dev->regs_base = ioremap(dev->mfc_mem->start, resource_size(dev->mfc_mem));
+	if (dev->regs_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap address region\n");
+		ret = -ENOENT;
+		goto err_ioremap;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to get irq resource\n");
+		ret = -ENOENT;
+		goto err_get_res;
+	}
+	dev->irq = res->start;
+	ret = request_irq(dev->irq, s5p_mfc_irq, IRQF_DISABLED, pdev->name,
+									dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to install irq (%d)\n", ret);
+		goto err_req_irq;
+	}
+
+	dev->mem_dev_l = device_find_child(&dev->plat_dev->dev, "s5p-mfc-l",
+					   match_child);
+	if (!dev->mem_dev_l) {
+		mfc_err("Mem child (L) device get failed\n");
+		ret = -ENODEV;
+		goto err_find_child;
+	}
+	dev->mem_dev_r = device_find_child(&dev->plat_dev->dev, "s5p-mfc-r",
+					   match_child);
+	if (!dev->mem_dev_r) {
+		mfc_err("Mem child (R) device get failed\n");
+		ret = -ENODEV;
+		goto err_find_child;
+	}
+
+	dev->alloc_ctx[0] = vb2_dma_contig_init_ctx(dev->mem_dev_l);
+	if (IS_ERR_OR_NULL(dev->alloc_ctx[0])) {
+		ret = PTR_ERR(dev->alloc_ctx[0]);
+		goto err_mem_init_ctx_0;
+	}
+	dev->alloc_ctx[1] = vb2_dma_contig_init_ctx(dev->mem_dev_r);
+	if (IS_ERR_OR_NULL(dev->alloc_ctx[1])) {
+		ret = PTR_ERR(dev->alloc_ctx[1]);
+		goto err_mem_init_ctx_1;
+	}
+
+	mutex_init(&dev->mfc_mutex);
+
+	ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
+	if (ret)
+		goto err_v4l2_dev_reg;
+	init_waitqueue_head(&dev->queue);
+
+	/* decoder */
+	vfd = video_device_alloc();
+	if (!vfd) {
+		v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n");
+		ret = -ENOMEM;
+		goto err_dec_alloc;
+	}
+	vfd->fops	= &s5p_mfc_fops,
+	vfd->ioctl_ops	= get_dec_v4l2_ioctl_ops();
+	vfd->release	= video_device_release,
+	vfd->lock	= &dev->mfc_mutex;
+	vfd->v4l2_dev	= &dev->v4l2_dev;
+	snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_DEC_NAME);
+	dev->vfd_dec	= vfd;
+	ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
+		video_device_release(vfd);
+		goto err_dec_reg;
+	}
+	v4l2_info(&dev->v4l2_dev,
+		  "decoder registered as /dev/video%d\n", vfd->num);
+	video_set_drvdata(vfd, dev);
+
+	/* encoder */
+	vfd = video_device_alloc();
+	if (!vfd) {
+		v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n");
+		ret = -ENOMEM;
+		goto err_enc_alloc;
+	}
+	vfd->fops	= &s5p_mfc_fops,
+	vfd->ioctl_ops	= get_enc_v4l2_ioctl_ops();
+	vfd->release	= video_device_release,
+	vfd->lock	= &dev->mfc_mutex;
+	vfd->v4l2_dev	= &dev->v4l2_dev;
+	snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_ENC_NAME);
+	dev->vfd_enc	= vfd;
+	ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
+		video_device_release(vfd);
+		goto err_enc_reg;
+	}
+	v4l2_info(&dev->v4l2_dev,
+		  "encoder registered as /dev/video%d\n", vfd->num);
+	video_set_drvdata(vfd, dev);
+	platform_set_drvdata(pdev, dev);
+
+	dev->hw_lock = 0;
+	dev->watchdog_workqueue = create_singlethread_workqueue(S5P_MFC_NAME);
+	INIT_WORK(&dev->watchdog_work, s5p_mfc_watchdog_worker);
+	atomic_set(&dev->watchdog_cnt, 0);
+	init_timer(&dev->watchdog_timer);
+	dev->watchdog_timer.data = (unsigned long)dev;
+	dev->watchdog_timer.function = s5p_mfc_watchdog;
+
+	pr_debug("%s--\n", __func__);
+	return 0;
+
+/* Deinit MFC if probe had failed */
+err_enc_reg:
+	video_device_release(dev->vfd_enc);
+err_enc_alloc:
+	video_unregister_device(dev->vfd_dec);
+err_dec_reg:
+	video_device_release(dev->vfd_dec);
+err_dec_alloc:
+	v4l2_device_unregister(&dev->v4l2_dev);
+err_v4l2_dev_reg:
+	vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[1]);
+err_mem_init_ctx_1:
+	vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[0]);
+err_mem_init_ctx_0:
+err_find_child:
+	free_irq(dev->irq, dev);
+err_req_irq:
+err_get_res:
+	iounmap(dev->regs_base);
+	dev->regs_base = NULL;
+err_ioremap:
+	release_resource(dev->mfc_mem);
+	kfree(dev->mfc_mem);
+err_mem_reg:
+err_res:
+	s5p_mfc_final_pm(dev);
+err_clk:
+err_dev:
+	kfree(dev);
+	pr_debug("%s-- with error\n", __func__);
+	return ret;
+
+}
+
+/* Remove the driver */
+static int __devexit s5p_mfc_remove(struct platform_device *pdev)
+{
+	struct s5p_mfc_dev *dev = platform_get_drvdata(pdev);
+
+	v4l2_info(&dev->v4l2_dev, "Removing %s\n", pdev->name);
+
+	del_timer_sync(&dev->watchdog_timer);
+	flush_workqueue(dev->watchdog_workqueue);
+	destroy_workqueue(dev->watchdog_workqueue);
+
+	video_unregister_device(dev->vfd_enc);
+	video_unregister_device(dev->vfd_dec);
+	v4l2_device_unregister(&dev->v4l2_dev);
+	vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[0]);
+	vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[1]);
+
+	free_irq(dev->irq, dev);
+	iounmap(dev->regs_base);
+	if (dev->mfc_mem) {
+		release_resource(dev->mfc_mem);
+		kfree(dev->mfc_mem);
+		dev->mfc_mem = NULL;
+	}
+	s5p_mfc_final_pm(dev);
+	kfree(dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int s5p_mfc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev);
+	int ret;
+
+	if (m_dev->num_inst == 0)
+		return 0;
+	return s5p_mfc_sleep(m_dev);
+	if (test_and_set_bit(0, &m_dev->enter_suspend) != 0) {
+		mfc_err("Error: going to suspend for a second time\n");
+		return -EIO;
+	}
+
+	/* Check if we're processing then wait if it necessary. */
+	while (test_and_set_bit(0, &m_dev->hw_lock) != 0) {
+		/* Try and lock the HW */
+		/* Wait on the interrupt waitqueue */
+		ret = wait_event_interruptible_timeout(m_dev->queue,
+			m_dev->int_cond || m_dev->ctx[m_dev->curr_ctx]->int_cond,
+			msecs_to_jiffies(MFC_INT_TIMEOUT));
+
+		if (ret == 0) {
+			mfc_err("Waiting for hardware to finish timed out\n");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
+static int s5p_mfc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev);
+
+	if (m_dev->num_inst == 0)
+		return 0;
+	return s5p_mfc_wakeup(m_dev);
+}
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+static int s5p_mfc_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev);
+
+	atomic_set(&m_dev->pm.power, 0);
+	return 0;
+}
+
+static int s5p_mfc_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev);
+	int pre_power;
+
+	if (!m_dev->alloc_ctx)
+		return 0;
+	pre_power = atomic_read(&m_dev->pm.power);
+	atomic_set(&m_dev->pm.power, 1);
+	return 0;
+}
+#endif
+
+/* Power management */
+static const struct dev_pm_ops s5p_mfc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(s5p_mfc_suspend, s5p_mfc_resume)
+	SET_RUNTIME_PM_OPS(s5p_mfc_runtime_suspend, s5p_mfc_runtime_resume,
+			   NULL)
+};
+
+static struct platform_driver s5p_mfc_pdrv = {
+	.probe	= s5p_mfc_probe,
+	.remove	= __devexit_p(s5p_mfc_remove),
+	.driver	= {
+		.name	= S5P_MFC_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &s5p_mfc_pm_ops
+	},
+};
+
+static char banner[] __initdata =
+			"S5P MFC V4L2 Driver, (C) 2011 Samsung Electronics\n";
+
+static int __init s5p_mfc_init(void)
+{
+	int ret;
+
+	pr_info("%s", banner);
+	ret = platform_driver_register(&s5p_mfc_pdrv);
+	if (ret)
+		pr_err("Platform device registration failed.\n");
+	return ret;
+}
+
+static void __devexit s5p_mfc_exit(void)
+{
+	platform_driver_unregister(&s5p_mfc_pdrv);
+}
+
+module_init(s5p_mfc_init);
+module_exit(s5p_mfc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
+MODULE_DESCRIPTION("Samsung S5P Multi Format Codec V4L2 driver");
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c
new file mode 100644
index 0000000..f0665ed
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c
@@ -0,0 +1,120 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "regs-mfc.h"
+#include "s5p_mfc_cmd.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+
+/* This function is used to send a command to the MFC */
+static int s5p_mfc_cmd_host2risc(struct s5p_mfc_dev *dev, int cmd,
+						struct s5p_mfc_cmd_args *args)
+{
+	int cur_cmd;
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT);
+	/* wait until host to risc command register becomes 'H2R_CMD_EMPTY' */
+	do {
+		if (time_after(jiffies, timeout)) {
+			mfc_err("Timeout while waiting for hardware\n");
+			return -EIO;
+		}
+		cur_cmd = mfc_read(dev, S5P_FIMV_HOST2RISC_CMD);
+	} while (cur_cmd != S5P_FIMV_H2R_CMD_EMPTY);
+	mfc_write(dev, args->arg[0], S5P_FIMV_HOST2RISC_ARG1);
+	mfc_write(dev, args->arg[1], S5P_FIMV_HOST2RISC_ARG2);
+	mfc_write(dev, args->arg[2], S5P_FIMV_HOST2RISC_ARG3);
+	mfc_write(dev, args->arg[3], S5P_FIMV_HOST2RISC_ARG4);
+	/* Issue the command */
+	mfc_write(dev, cmd, S5P_FIMV_HOST2RISC_CMD);
+	return 0;
+}
+
+/* Initialize the MFC */
+int s5p_mfc_sys_init_cmd(struct s5p_mfc_dev *dev)
+{
+	struct s5p_mfc_cmd_args h2r_args;
+
+	memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
+	h2r_args.arg[0] = dev->fw_size;
+	return s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_SYS_INIT, &h2r_args);
+}
+
+/* Suspend the MFC hardware */
+int s5p_mfc_sleep_cmd(struct s5p_mfc_dev *dev)
+{
+	struct s5p_mfc_cmd_args h2r_args;
+
+	memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
+	return s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_SLEEP, &h2r_args);
+}
+
+/* Wake up the MFC hardware */
+int s5p_mfc_wakeup_cmd(struct s5p_mfc_dev *dev)
+{
+	struct s5p_mfc_cmd_args h2r_args;
+
+	memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
+	return s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_WAKEUP, &h2r_args);
+}
+
+
+int s5p_mfc_open_inst_cmd(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_cmd_args h2r_args;
+	int ret;
+
+	/* Preparing decoding - getting instance number */
+	mfc_debug(2, "Getting instance number (codec: %d)\n", ctx->codec_mode);
+	dev->curr_ctx = ctx->num;
+	memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
+	h2r_args.arg[0] = ctx->codec_mode;
+	h2r_args.arg[1] = 0; /* no crc & no pixelcache */
+	h2r_args.arg[2] = ctx->ctx_ofs;
+	h2r_args.arg[3] = ctx->ctx_size;
+	ret = s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_OPEN_INSTANCE,
+								&h2r_args);
+	if (ret) {
+		mfc_err("Failed to create a new instance\n");
+		ctx->state = MFCINST_ERROR;
+	}
+	return ret;
+}
+
+int s5p_mfc_close_inst_cmd(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_cmd_args h2r_args;
+	int ret;
+
+	if (ctx->state == MFCINST_FREE) {
+		mfc_err("Instance already returned\n");
+		ctx->state = MFCINST_ERROR;
+		return -EINVAL;
+	}
+	/* Closing decoding instance  */
+	mfc_debug(2, "Returning instance number %d\n", ctx->inst_no);
+	dev->curr_ctx = ctx->num;
+	memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
+	h2r_args.arg[0] = ctx->inst_no;
+	ret = s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_CLOSE_INSTANCE,
+								&h2r_args);
+	if (ret) {
+		mfc_err("Failed to return an instance\n");
+		ctx->state = MFCINST_ERROR;
+		return -EINVAL;
+	}
+	return 0;
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h
new file mode 100644
index 0000000..5ceebfe
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h
@@ -0,0 +1,30 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_CMD_H_
+#define S5P_MFC_CMD_H_
+
+#include "s5p_mfc_common.h"
+
+#define MAX_H2R_ARG	4
+
+struct s5p_mfc_cmd_args {
+	unsigned int	arg[MAX_H2R_ARG];
+};
+
+int s5p_mfc_sys_init_cmd(struct s5p_mfc_dev *dev);
+int s5p_mfc_sleep_cmd(struct s5p_mfc_dev *dev);
+int s5p_mfc_wakeup_cmd(struct s5p_mfc_dev *dev);
+int s5p_mfc_open_inst_cmd(struct s5p_mfc_ctx *ctx);
+int s5p_mfc_close_inst_cmd(struct s5p_mfc_ctx *ctx);
+
+#endif /* S5P_MFC_CMD_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_common.h b/drivers/media/video/s5p-mfc/s5p_mfc_common.h
new file mode 100644
index 0000000..91146fa
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_common.h
@@ -0,0 +1,572 @@
+/*
+ * Samsung S5P Multi Format Codec v 5.0
+ *
+ * This file contains definitions of enums and structs used by the codec
+ * driver.
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Kamil Debski, <k.debski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version
+ */
+
+#ifndef S5P_MFC_COMMON_H_
+#define S5P_MFC_COMMON_H_
+
+#include "regs-mfc.h"
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-core.h>
+
+/* Definitions related to MFC memory */
+
+/* Offset base used to differentiate between CAPTURE and OUTPUT
+*  while mmaping */
+#define DST_QUEUE_OFF_BASE      (TASK_SIZE / 2)
+
+/* Offset used by the hardware to store addresses */
+#define MFC_OFFSET_SHIFT	11
+
+#define FIRMWARE_ALIGN		0x20000		/* 128KB */
+#define MFC_H264_CTX_BUF_SIZE	0x96000		/* 600KB per H264 instance */
+#define MFC_CTX_BUF_SIZE	0x2800		/* 10KB per instance */
+#define DESC_BUF_SIZE		0x20000		/* 128KB for DESC buffer */
+#define SHARED_BUF_SIZE		0x2000		/* 8KB for shared buffer */
+
+#define DEF_CPB_SIZE		0x40000		/* 512KB */
+
+#define MFC_BANK1_ALLOC_CTX	0
+#define MFC_BANK2_ALLOC_CTX	1
+
+#define MFC_BANK1_ALIGN_ORDER	13
+#define MFC_BANK2_ALIGN_ORDER	13
+#define MFC_BASE_ALIGN_ORDER	17
+
+#include <media/videobuf2-dma-contig.h>
+
+static inline dma_addr_t s5p_mfc_mem_cookie(void *a, void *b)
+{
+	/* Same functionality as the vb2_dma_contig_plane_paddr */
+	dma_addr_t *paddr = vb2_dma_contig_memops.cookie(b);
+
+	return *paddr;
+}
+
+/* MFC definitions */
+#define MFC_MAX_EXTRA_DPB       5
+#define MFC_MAX_BUFFERS		32
+#define MFC_NUM_CONTEXTS	4
+/* Interrupt timeout */
+#define MFC_INT_TIMEOUT		2000
+/* Busy wait timeout */
+#define MFC_BW_TIMEOUT		500
+/* Watchdog interval */
+#define MFC_WATCHDOG_INTERVAL   1000
+/* After how many executions watchdog should assume lock up */
+#define MFC_WATCHDOG_CNT        10
+#define MFC_NO_INSTANCE_SET	-1
+#define MFC_ENC_CAP_PLANE_COUNT	1
+#define MFC_ENC_OUT_PLANE_COUNT	2
+#define STUFF_BYTE		4
+#define MFC_MAX_CTRLS		64
+
+#define mfc_read(dev, offset)		readl(dev->regs_base + (offset))
+#define mfc_write(dev, data, offset)	writel((data), dev->regs_base + \
+								(offset))
+
+/**
+ * enum s5p_mfc_fmt_type - type of the pixelformat
+ */
+enum s5p_mfc_fmt_type {
+	MFC_FMT_DEC,
+	MFC_FMT_ENC,
+	MFC_FMT_RAW,
+};
+
+/**
+ * enum s5p_mfc_node_type - The type of an MFC device node.
+ */
+enum s5p_mfc_node_type {
+	MFCNODE_INVALID = -1,
+	MFCNODE_DECODER = 0,
+	MFCNODE_ENCODER = 1,
+};
+
+/**
+ * enum s5p_mfc_inst_type - The type of an MFC instance.
+ */
+enum s5p_mfc_inst_type {
+	MFCINST_INVALID,
+	MFCINST_DECODER,
+	MFCINST_ENCODER,
+};
+
+/**
+ * enum s5p_mfc_inst_state - The state of an MFC instance.
+ */
+enum s5p_mfc_inst_state {
+	MFCINST_FREE = 0,
+	MFCINST_INIT = 100,
+	MFCINST_GOT_INST,
+	MFCINST_HEAD_PARSED,
+	MFCINST_BUFS_SET,
+	MFCINST_RUNNING,
+	MFCINST_FINISHING,
+	MFCINST_FINISHED,
+	MFCINST_RETURN_INST,
+	MFCINST_ERROR,
+	MFCINST_ABORT,
+	MFCINST_RES_CHANGE_INIT,
+	MFCINST_RES_CHANGE_FLUSH,
+	MFCINST_RES_CHANGE_END,
+};
+
+/**
+ * enum s5p_mfc_queue_state - The state of buffer queue.
+ */
+enum s5p_mfc_queue_state {
+	QUEUE_FREE,
+	QUEUE_BUFS_REQUESTED,
+	QUEUE_BUFS_QUERIED,
+	QUEUE_BUFS_MMAPED,
+};
+
+/**
+ * enum s5p_mfc_decode_arg - type of frame decoding
+ */
+enum s5p_mfc_decode_arg {
+	MFC_DEC_FRAME,
+	MFC_DEC_LAST_FRAME,
+	MFC_DEC_RES_CHANGE,
+};
+
+struct s5p_mfc_ctx;
+
+/**
+ * struct s5p_mfc_buf - MFC buffer
+ */
+struct s5p_mfc_buf {
+	struct list_head list;
+	struct vb2_buffer *b;
+	union {
+		struct {
+			size_t luma;
+			size_t chroma;
+		} raw;
+		size_t stream;
+	} cookie;
+	int used;
+};
+
+/**
+ * struct s5p_mfc_pm - power management data structure
+ */
+struct s5p_mfc_pm {
+	struct clk	*clock;
+	struct clk	*clock_gate;
+	atomic_t	power;
+	struct device	*device;
+};
+
+/**
+ * struct s5p_mfc_dev - The struct containing driver internal parameters.
+ *
+ * @v4l2_dev:		v4l2_device
+ * @vfd_dec:		video device for decoding
+ * @vfd_enc:		video device for encoding
+ * @plat_dev:		platform device
+ * @mem_dev_l:		child device of the left memory bank (0)
+ * @mem_dev_r:		child device of the right memory bank (1)
+ * @regs_base:		base address of the MFC hw registers
+ * @irq:		irq resource
+ * @mfc_mem:		MFC registers memory resource
+ * @dec_ctrl_handler:	control framework handler for decoding
+ * @enc_ctrl_handler:	control framework handler for encoding
+ * @pm:			power management control
+ * @num_inst:		couter of active MFC instances
+ * @irqlock:		lock for operations on videobuf2 queues
+ * @condlock:		lock for changing/checking if a context is ready to be
+ *			processed
+ * @mfc_mutex:		lock for video_device
+ * @int_cond:		variable used by the waitqueue
+ * @int_type:		type of last interrupt
+ * @int_err:		error number for last interrupt
+ * @queue:		waitqueue for waiting for completion of device commands
+ * @fw_size:		size of firmware
+ * @bank1:		address of the beggining of bank 1 memory
+ * @bank2:		address of the beggining of bank 2 memory
+ * @hw_lock:		used for hardware locking
+ * @ctx:		array of driver contexts
+ * @curr_ctx:		number of the currently running context
+ * @ctx_work_bits:	used to mark which contexts are waiting for hardware
+ * @watchdog_cnt:	counter for the watchdog
+ * @watchdog_workqueue:	workqueue for the watchdog
+ * @watchdog_work:	worker for the watchdog
+ * @alloc_ctx:		videobuf2 allocator contexts for two memory banks
+ * @enter_suspend:	flag set when entering suspend
+ *
+ */
+struct s5p_mfc_dev {
+	struct v4l2_device	v4l2_dev;
+	struct video_device	*vfd_dec;
+	struct video_device	*vfd_enc;
+	struct platform_device	*plat_dev;
+	struct device		*mem_dev_l;
+	struct device		*mem_dev_r;
+	void __iomem		*regs_base;
+	int			irq;
+	struct resource		*mfc_mem;
+	struct v4l2_ctrl_handler dec_ctrl_handler;
+	struct v4l2_ctrl_handler enc_ctrl_handler;
+	struct s5p_mfc_pm	pm;
+	int num_inst;
+	spinlock_t irqlock;	/* lock when operating on videobuf2 queues */
+	spinlock_t condlock;	/* lock when changing/checking if a context is
+					ready to be processed */
+	struct mutex mfc_mutex; /* video_device lock */
+	int int_cond;
+	int int_type;
+	unsigned int int_err;
+	wait_queue_head_t queue;
+	size_t fw_size;
+	size_t bank1;
+	size_t bank2;
+	unsigned long hw_lock;
+	struct s5p_mfc_ctx *ctx[MFC_NUM_CONTEXTS];
+	int curr_ctx;
+	unsigned long ctx_work_bits;
+	atomic_t watchdog_cnt;
+	struct timer_list watchdog_timer;
+	struct workqueue_struct *watchdog_workqueue;
+	struct work_struct watchdog_work;
+	void *alloc_ctx[2];
+	unsigned long enter_suspend;
+};
+
+/**
+ * struct s5p_mfc_h264_enc_params - encoding parameters for h264
+ */
+struct s5p_mfc_h264_enc_params {
+	enum v4l2_mpeg_video_h264_profile profile;
+	enum v4l2_mpeg_video_h264_loop_filter_mode loop_filter_mode;
+	s8 loop_filter_alpha;
+	s8 loop_filter_beta;
+	enum v4l2_mpeg_video_h264_entropy_mode entropy_mode;
+	u8 max_ref_pic;
+	u8 num_ref_pic_4p;
+	int _8x8_transform;
+	int rc_mb;
+	int rc_mb_dark;
+	int rc_mb_smooth;
+	int rc_mb_static;
+	int rc_mb_activity;
+	int vui_sar;
+	u8 vui_sar_idc;
+	u16 vui_ext_sar_width;
+	u16 vui_ext_sar_height;
+	int open_gop;
+	u16 open_gop_size;
+	u8 rc_frame_qp;
+	u8 rc_min_qp;
+	u8 rc_max_qp;
+	u8 rc_p_frame_qp;
+	u8 rc_b_frame_qp;
+	enum v4l2_mpeg_video_h264_level level_v4l2;
+	int level;
+	u16 cpb_size;
+};
+
+/**
+ * struct s5p_mfc_mpeg4_enc_params - encoding parameters for h263 and mpeg4
+ */
+struct s5p_mfc_mpeg4_enc_params {
+	/* MPEG4 Only */
+	enum v4l2_mpeg_video_mpeg4_profile profile;
+	int quarter_pixel;
+	/* Common for MPEG4, H263 */
+	u16 vop_time_res;
+	u16 vop_frm_delta;
+	u8 rc_frame_qp;
+	u8 rc_min_qp;
+	u8 rc_max_qp;
+	u8 rc_p_frame_qp;
+	u8 rc_b_frame_qp;
+	enum v4l2_mpeg_video_mpeg4_level level_v4l2;
+	int level;
+};
+
+/**
+ * struct s5p_mfc_enc_params - general encoding parameters
+ */
+struct s5p_mfc_enc_params {
+	u16 width;
+	u16 height;
+
+	u16 gop_size;
+	enum v4l2_mpeg_video_multi_slice_mode slice_mode;
+	u16 slice_mb;
+	u32 slice_bit;
+	u16 intra_refresh_mb;
+	int pad;
+	u8 pad_luma;
+	u8 pad_cb;
+	u8 pad_cr;
+	int rc_frame;
+	u32 rc_bitrate;
+	u16 rc_reaction_coeff;
+	u16 vbv_size;
+
+	enum v4l2_mpeg_video_header_mode seq_hdr_mode;
+	enum v4l2_mpeg_mfc51_video_frame_skip_mode frame_skip_mode;
+	int fixed_target_bit;
+
+	u8 num_b_frame;
+	u32 rc_framerate_num;
+	u32 rc_framerate_denom;
+	int interlace;
+
+	union {
+		struct s5p_mfc_h264_enc_params h264;
+		struct s5p_mfc_mpeg4_enc_params mpeg4;
+	} codec;
+
+};
+
+/**
+ * struct s5p_mfc_codec_ops - codec ops, used by encoding
+ */
+struct s5p_mfc_codec_ops {
+	/* initialization routines */
+	int (*pre_seq_start) (struct s5p_mfc_ctx *ctx);
+	int (*post_seq_start) (struct s5p_mfc_ctx *ctx);
+	/* execution routines */
+	int (*pre_frame_start) (struct s5p_mfc_ctx *ctx);
+	int (*post_frame_start) (struct s5p_mfc_ctx *ctx);
+};
+
+#define call_cop(c, op, args...)				\
+	(((c)->c_ops->op) ?					\
+		((c)->c_ops->op(args)) : 0)
+
+/**
+ * struct s5p_mfc_ctx - This struct contains the instance context
+ *
+ * @dev:		pointer to the s5p_mfc_dev of the device
+ * @fh:			struct v4l2_fh
+ * @num:		number of the context that this structure describes
+ * @int_cond:		variable used by the waitqueue
+ * @int_type:		type of the last interrupt
+ * @int_err:		error number received from MFC hw in the interrupt
+ * @queue:		waitqueue that can be used to wait for this context to
+ *			finish
+ * @src_fmt:		source pixelformat information
+ * @dst_fmt:		destination pixelformat information
+ * @vq_src:		vb2 queue for source buffers
+ * @vq_dst:		vb2 queue for destination buffers
+ * @src_queue:		driver internal queue for source buffers
+ * @dst_queue:		driver internal queue for destination buffers
+ * @src_queue_cnt:	number of buffers queued on the source internal queue
+ * @dst_queue_cnt:	number of buffers queued on the dest internal queue
+ * @type:		type of the instance - decoder or encoder
+ * @state:		state of the context
+ * @inst_no:		number of hw instance associated with the context
+ * @img_width:		width of the image that is decoded or encoded
+ * @img_height:		height of the image that is decoded or encoded
+ * @buf_width:		width of the buffer for processed image
+ * @buf_height:		height of the buffer for processed image
+ * @luma_size:		size of a luma plane
+ * @chroma_size:	size of a chroma plane
+ * @mv_size:		size of a motion vectors buffer
+ * @consumed_stream:	number of bytes that have been used so far from the
+ *			decoding buffer
+ * @dpb_flush_flag:	flag used to indicate that a DPB buffers are being
+ *			flushed
+ * @bank1_buf:		handle to memory allocated for temporary buffers from
+ *			memory bank 1
+ * @bank1_phys:		address of the temporary buffers from memory bank 1
+ * @bank1_size:		size of the memory allocated for temporary buffers from
+ *			memory bank 1
+ * @bank2_buf:		handle to memory allocated for temporary buffers from
+ *			memory bank 2
+ * @bank2_phys:		address of the temporary buffers from memory bank 2
+ * @bank2_size:		size of the memory allocated for temporary buffers from
+ *			memory bank 2
+ * @capture_state:	state of the capture buffers queue
+ * @output_state:	state of the output buffers queue
+ * @src_bufs:		information on allocated source buffers
+ * @dst_bufs:		information on allocated destination buffers
+ * @sequence:		counter for the sequence number for v4l2
+ * @dec_dst_flag:	flags for buffers queued in the hardware
+ * @dec_src_buf_size:	size of the buffer for source buffers in decoding
+ * @codec_mode:		number of codec mode used by MFC hw
+ * @slice_interface:	slice interface flag
+ * @loop_filter_mpeg4:	loop filter for MPEG4 flag
+ * @display_delay:	value of the display delay for H264
+ * @display_delay_enable:	display delay for H264 enable flag
+ * @after_packed_pb:	flag used to track buffer when stream is in
+ *			Packed PB format
+ * @dpb_count:		count of the DPB buffers required by MFC hw
+ * @total_dpb_count:	count of DPB buffers with additional buffers
+ *			requested by the application
+ * @ctx_buf:		handle to the memory associated with this context
+ * @ctx_phys:		address of the memory associated with this context
+ * @ctx_size:		size of the memory associated with this context
+ * @desc_buf:		description buffer for decoding handle
+ * @desc_phys:		description buffer for decoding address
+ * @shm_alloc:		handle for the shared memory buffer
+ * @shm:		virtual address for the shared memory buffer
+ * @shm_ofs:		address offset for shared memory
+ * @enc_params:		encoding parameters for MFC
+ * @enc_dst_buf_size:	size of the buffers for encoder output
+ * @frame_type:		used to force the type of the next encoded frame
+ * @ref_queue:		list of the reference buffers for encoding
+ * @ref_queue_cnt:	number of the buffers in the reference list
+ * @c_ops:		ops for encoding
+ * @ctrls:		array of controls, used when adding controls to the
+ *			v4l2 control framework
+ * @ctrl_handler:	handler for v4l2 framework
+ */
+struct s5p_mfc_ctx {
+	struct s5p_mfc_dev *dev;
+	struct v4l2_fh fh;
+
+	int num;
+
+	int int_cond;
+	int int_type;
+	unsigned int int_err;
+	wait_queue_head_t queue;
+
+	struct s5p_mfc_fmt *src_fmt;
+	struct s5p_mfc_fmt *dst_fmt;
+
+	struct vb2_queue vq_src;
+	struct vb2_queue vq_dst;
+
+	struct list_head src_queue;
+	struct list_head dst_queue;
+
+	unsigned int src_queue_cnt;
+	unsigned int dst_queue_cnt;
+
+	enum s5p_mfc_inst_type type;
+	enum s5p_mfc_inst_state state;
+	int inst_no;
+
+	/* Image parameters */
+	int img_width;
+	int img_height;
+	int buf_width;
+	int buf_height;
+
+	int luma_size;
+	int chroma_size;
+	int mv_size;
+
+	unsigned long consumed_stream;
+
+	unsigned int dpb_flush_flag;
+
+	/* Buffers */
+	void *bank1_buf;
+	size_t bank1_phys;
+	size_t bank1_size;
+
+	void *bank2_buf;
+	size_t bank2_phys;
+	size_t bank2_size;
+
+	enum s5p_mfc_queue_state capture_state;
+	enum s5p_mfc_queue_state output_state;
+
+	struct s5p_mfc_buf src_bufs[MFC_MAX_BUFFERS];
+	int src_bufs_cnt;
+	struct s5p_mfc_buf dst_bufs[MFC_MAX_BUFFERS];
+	int dst_bufs_cnt;
+
+	unsigned int sequence;
+	unsigned long dec_dst_flag;
+	size_t dec_src_buf_size;
+
+	/* Control values */
+	int codec_mode;
+	int slice_interface;
+	int loop_filter_mpeg4;
+	int display_delay;
+	int display_delay_enable;
+	int after_packed_pb;
+
+	int dpb_count;
+	int total_dpb_count;
+
+	/* Buffers */
+	void *ctx_buf;
+	size_t ctx_phys;
+	size_t ctx_ofs;
+	size_t ctx_size;
+
+	void *desc_buf;
+	size_t desc_phys;
+
+
+	void *shm_alloc;
+	void *shm;
+	size_t shm_ofs;
+
+	struct s5p_mfc_enc_params enc_params;
+
+	size_t enc_dst_buf_size;
+
+	enum v4l2_mpeg_mfc51_video_force_frame_type force_frame_type;
+
+	struct list_head ref_queue;
+	unsigned int ref_queue_cnt;
+
+	struct s5p_mfc_codec_ops *c_ops;
+
+	struct v4l2_ctrl *ctrls[MFC_MAX_CTRLS];
+	struct v4l2_ctrl_handler ctrl_handler;
+};
+
+/*
+ * struct s5p_mfc_fmt -	structure used to store information about pixelformats
+ *			used by the MFC
+ */
+struct s5p_mfc_fmt {
+	char *name;
+	u32 fourcc;
+	u32 codec_mode;
+	enum s5p_mfc_fmt_type type;
+	u32 num_planes;
+};
+
+/**
+ * struct mfc_control -	structure used to store information about MFC controls
+ *			it is used to initialize the control framework.
+ */
+struct mfc_control {
+	__u32			id;
+	enum v4l2_ctrl_type	type;
+	__u8			name[32];  /* Whatever */
+	__s32			minimum;   /* Note signedness */
+	__s32			maximum;
+	__s32			step;
+	__u32			menu_skip_mask;
+	__s32			default_value;
+	__u32			flags;
+	__u32			reserved[2];
+	__u8			is_volatile;
+};
+
+
+#define fh_to_ctx(__fh) container_of(__fh, struct s5p_mfc_ctx, fh)
+#define ctrl_to_ctx(__ctrl) \
+	container_of((__ctrl)->handler, struct s5p_mfc_ctx, ctrl_handler)
+
+#endif /* S5P_MFC_COMMON_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
new file mode 100644
index 0000000..5f4da80
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
@@ -0,0 +1,343 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include "regs-mfc.h"
+#include "s5p_mfc_cmd.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_intr.h"
+#include "s5p_mfc_pm.h"
+
+static void *s5p_mfc_bitproc_buf;
+static size_t s5p_mfc_bitproc_phys;
+static unsigned char *s5p_mfc_bitproc_virt;
+
+/* Allocate and load firmware */
+int s5p_mfc_alloc_and_load_firmware(struct s5p_mfc_dev *dev)
+{
+	struct firmware *fw_blob;
+	size_t bank2_base_phys;
+	void *b_base;
+	int err;
+
+	/* Firmare has to be present as a separate file or compiled
+	 * into kernel. */
+	mfc_debug_enter();
+	err = request_firmware((const struct firmware **)&fw_blob,
+				     "s5pc110-mfc.fw", dev->v4l2_dev.dev);
+	if (err != 0) {
+		mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
+		return -EINVAL;
+	}
+	dev->fw_size = ALIGN(fw_blob->size, FIRMWARE_ALIGN);
+	if (s5p_mfc_bitproc_buf) {
+		mfc_err("Attempting to allocate firmware when it seems that it is already loaded\n");
+		release_firmware(fw_blob);
+		return -ENOMEM;
+	}
+	s5p_mfc_bitproc_buf = vb2_dma_contig_memops.alloc(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], dev->fw_size);
+	if (IS_ERR(s5p_mfc_bitproc_buf)) {
+		s5p_mfc_bitproc_buf = 0;
+		mfc_err("Allocating bitprocessor buffer failed\n");
+		release_firmware(fw_blob);
+		return -ENOMEM;
+	}
+	s5p_mfc_bitproc_phys = s5p_mfc_mem_cookie(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], s5p_mfc_bitproc_buf);
+	if (s5p_mfc_bitproc_phys & ((1 << MFC_BASE_ALIGN_ORDER) - 1)) {
+		mfc_err("The base memory for bank 1 is not aligned to 128KB\n");
+		vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
+		s5p_mfc_bitproc_phys = 0;
+		s5p_mfc_bitproc_buf = 0;
+		release_firmware(fw_blob);
+		return -EIO;
+	}
+	s5p_mfc_bitproc_virt = vb2_dma_contig_memops.vaddr(s5p_mfc_bitproc_buf);
+	if (!s5p_mfc_bitproc_virt) {
+		mfc_err("Bitprocessor memory remap failed\n");
+		vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
+		s5p_mfc_bitproc_phys = 0;
+		s5p_mfc_bitproc_buf = 0;
+		release_firmware(fw_blob);
+		return -EIO;
+	}
+	dev->bank1 = s5p_mfc_bitproc_phys;
+	b_base = vb2_dma_contig_memops.alloc(
+		dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], 1 << MFC_BANK2_ALIGN_ORDER);
+	if (IS_ERR(b_base)) {
+		vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
+		s5p_mfc_bitproc_phys = 0;
+		s5p_mfc_bitproc_buf = 0;
+		mfc_err("Allocating bank2 base failed\n");
+	release_firmware(fw_blob);
+		return -ENOMEM;
+	}
+	bank2_base_phys = s5p_mfc_mem_cookie(
+		dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], b_base);
+	vb2_dma_contig_memops.put(b_base);
+	if (bank2_base_phys & ((1 << MFC_BASE_ALIGN_ORDER) - 1)) {
+		mfc_err("The base memory for bank 2 is not aligned to 128KB\n");
+		vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
+		s5p_mfc_bitproc_phys = 0;
+		s5p_mfc_bitproc_buf = 0;
+		release_firmware(fw_blob);
+		return -EIO;
+	}
+	dev->bank2 = bank2_base_phys;
+	memcpy(s5p_mfc_bitproc_virt, fw_blob->data, fw_blob->size);
+	wmb();
+	release_firmware(fw_blob);
+	mfc_debug_leave();
+	return 0;
+}
+
+/* Reload firmware to MFC */
+int s5p_mfc_reload_firmware(struct s5p_mfc_dev *dev)
+{
+	struct firmware *fw_blob;
+	int err;
+
+	/* Firmare has to be present as a separate file or compiled
+	 * into kernel. */
+	mfc_debug_enter();
+	err = request_firmware((const struct firmware **)&fw_blob,
+				     "s5pc110-mfc.fw", dev->v4l2_dev.dev);
+	if (err != 0) {
+		mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
+		return -EINVAL;
+	}
+	if (fw_blob->size > dev->fw_size) {
+		mfc_err("MFC firmware is too big to be loaded\n");
+		release_firmware(fw_blob);
+		return -ENOMEM;
+	}
+	if (s5p_mfc_bitproc_buf == 0 || s5p_mfc_bitproc_phys == 0) {
+		mfc_err("MFC firmware is not allocated or was not mapped correctly\n");
+		release_firmware(fw_blob);
+		return -EINVAL;
+	}
+	memcpy(s5p_mfc_bitproc_virt, fw_blob->data, fw_blob->size);
+	wmb();
+	release_firmware(fw_blob);
+	mfc_debug_leave();
+	return 0;
+}
+
+/* Release firmware memory */
+int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
+{
+	/* Before calling this function one has to make sure
+	 * that MFC is no longer processing */
+	if (!s5p_mfc_bitproc_buf)
+		return -EINVAL;
+	vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
+	s5p_mfc_bitproc_virt =  0;
+	s5p_mfc_bitproc_phys = 0;
+	s5p_mfc_bitproc_buf = 0;
+	return 0;
+}
+
+/* Reset the device */
+int s5p_mfc_reset(struct s5p_mfc_dev *dev)
+{
+	unsigned int mc_status;
+	unsigned long timeout;
+
+	mfc_debug_enter();
+	/* Stop procedure */
+	/*  reset RISC */
+	mfc_write(dev, 0x3f6, S5P_FIMV_SW_RESET);
+	/*  All reset except for MC */
+	mfc_write(dev, 0x3e2, S5P_FIMV_SW_RESET);
+	mdelay(10);
+
+	timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT);
+	/* Check MC status */
+	do {
+		if (time_after(jiffies, timeout)) {
+			mfc_err("Timeout while resetting MFC\n");
+			return -EIO;
+		}
+
+		mc_status = mfc_read(dev, S5P_FIMV_MC_STATUS);
+
+	} while (mc_status & 0x3);
+
+	mfc_write(dev, 0x0, S5P_FIMV_SW_RESET);
+	mfc_write(dev, 0x3fe, S5P_FIMV_SW_RESET);
+	mfc_debug_leave();
+	return 0;
+}
+
+static inline void s5p_mfc_init_memctrl(struct s5p_mfc_dev *dev)
+{
+	mfc_write(dev, dev->bank1, S5P_FIMV_MC_DRAMBASE_ADR_A);
+	mfc_write(dev, dev->bank2, S5P_FIMV_MC_DRAMBASE_ADR_B);
+	mfc_debug(2, "Bank1: %08x, Bank2: %08x\n", dev->bank1, dev->bank2);
+}
+
+static inline void s5p_mfc_clear_cmds(struct s5p_mfc_dev *dev)
+{
+	mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH0_INST_ID);
+	mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH1_INST_ID);
+	mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD);
+	mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD);
+}
+
+/* Initialize hardware */
+int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
+{
+	unsigned int ver;
+	int ret;
+
+	mfc_debug_enter();
+	if (!s5p_mfc_bitproc_buf)
+		return -EINVAL;
+
+	/* 0. MFC reset */
+	mfc_debug(2, "MFC reset..\n");
+	s5p_mfc_clock_on();
+	ret = s5p_mfc_reset(dev);
+	if (ret) {
+		mfc_err("Failed to reset MFC - timeout\n");
+		return ret;
+	}
+	mfc_debug(2, "Done MFC reset..\n");
+	/* 1. Set DRAM base Addr */
+	s5p_mfc_init_memctrl(dev);
+	/* 2. Initialize registers of channel I/F */
+	s5p_mfc_clear_cmds(dev);
+	/* 3. Release reset signal to the RISC */
+	s5p_mfc_clean_dev_int_flags(dev);
+	mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
+	mfc_debug(2, "Will now wait for completion of firmware transfer\n");
+	if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_FW_STATUS_RET)) {
+		mfc_err("Failed to load firmware\n");
+		s5p_mfc_reset(dev);
+		s5p_mfc_clock_off();
+		return -EIO;
+	}
+	s5p_mfc_clean_dev_int_flags(dev);
+	/* 4. Initialize firmware */
+	ret = s5p_mfc_sys_init_cmd(dev);
+	if (ret) {
+		mfc_err("Failed to send command to MFC - timeout\n");
+		s5p_mfc_reset(dev);
+		s5p_mfc_clock_off();
+		return ret;
+	}
+	mfc_debug(2, "Ok, now will write a command to init the system\n");
+	if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_SYS_INIT_RET)) {
+		mfc_err("Failed to load firmware\n");
+		s5p_mfc_reset(dev);
+		s5p_mfc_clock_off();
+		return -EIO;
+	}
+	dev->int_cond = 0;
+	if (dev->int_err != 0 || dev->int_type !=
+					S5P_FIMV_R2H_CMD_SYS_INIT_RET) {
+		/* Failure. */
+		mfc_err("Failed to init firmware - error: %d int: %d\n",
+						dev->int_err, dev->int_type);
+		s5p_mfc_reset(dev);
+		s5p_mfc_clock_off();
+		return -EIO;
+	}
+	ver = mfc_read(dev, S5P_FIMV_FW_VERSION);
+	mfc_debug(2, "MFC F/W version : %02xyy, %02xmm, %02xdd\n",
+		(ver >> 16) & 0xFF, (ver >> 8) & 0xFF, ver & 0xFF);
+	s5p_mfc_clock_off();
+	mfc_debug_leave();
+	return 0;
+}
+
+
+int s5p_mfc_sleep(struct s5p_mfc_dev *dev)
+{
+	int ret;
+
+	mfc_debug_enter();
+	s5p_mfc_clock_on();
+	s5p_mfc_clean_dev_int_flags(dev);
+	ret = s5p_mfc_sleep_cmd(dev);
+	if (ret) {
+		mfc_err("Failed to send command to MFC - timeout\n");
+		return ret;
+	}
+	if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_SLEEP_RET)) {
+		mfc_err("Failed to sleep\n");
+		return -EIO;
+	}
+	s5p_mfc_clock_off();
+	dev->int_cond = 0;
+	if (dev->int_err != 0 || dev->int_type !=
+						S5P_FIMV_R2H_CMD_SLEEP_RET) {
+		/* Failure. */
+		mfc_err("Failed to sleep - error: %d int: %d\n", dev->int_err,
+								dev->int_type);
+		return -EIO;
+	}
+	mfc_debug_leave();
+	return ret;
+}
+
+int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
+{
+	int ret;
+
+	mfc_debug_enter();
+	/* 0. MFC reset */
+	mfc_debug(2, "MFC reset..\n");
+	s5p_mfc_clock_on();
+	ret = s5p_mfc_reset(dev);
+	if (ret) {
+		mfc_err("Failed to reset MFC - timeout\n");
+		return ret;
+	}
+	mfc_debug(2, "Done MFC reset..\n");
+	/* 1. Set DRAM base Addr */
+	s5p_mfc_init_memctrl(dev);
+	/* 2. Initialize registers of channel I/F */
+	s5p_mfc_clear_cmds(dev);
+	s5p_mfc_clean_dev_int_flags(dev);
+	/* 3. Initialize firmware */
+	ret = s5p_mfc_wakeup_cmd(dev);
+	if (ret) {
+		mfc_err("Failed to send command to MFC - timeout\n");
+		return ret;
+	}
+	/* 4. Release reset signal to the RISC */
+	mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
+	mfc_debug(2, "Ok, now will write a command to wakeup the system\n");
+	if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_WAKEUP_RET)) {
+		mfc_err("Failed to load firmware\n");
+		return -EIO;
+	}
+	s5p_mfc_clock_off();
+	dev->int_cond = 0;
+	if (dev->int_err != 0 || dev->int_type !=
+						S5P_FIMV_R2H_CMD_WAKEUP_RET) {
+		/* Failure. */
+		mfc_err("Failed to wakeup - error: %d int: %d\n", dev->int_err,
+								dev->int_type);
+		return -EIO;
+	}
+	mfc_debug_leave();
+	return 0;
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h
new file mode 100644
index 0000000..61dc23b
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h
@@ -0,0 +1,29 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_CTRL_H
+#define S5P_MFC_CTRL_H
+
+#include "s5p_mfc_common.h"
+
+int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev);
+int s5p_mfc_alloc_and_load_firmware(struct s5p_mfc_dev *dev);
+int s5p_mfc_reload_firmware(struct s5p_mfc_dev *dev);
+
+int s5p_mfc_init_hw(struct s5p_mfc_dev *dev);
+
+int s5p_mfc_sleep(struct s5p_mfc_dev *dev);
+int s5p_mfc_wakeup(struct s5p_mfc_dev *dev);
+
+int s5p_mfc_reset(struct s5p_mfc_dev *dev);
+
+#endif /* S5P_MFC_CTRL_H */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_debug.h b/drivers/media/video/s5p-mfc/s5p_mfc_debug.h
new file mode 100644
index 0000000..ecb8616
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_debug.h
@@ -0,0 +1,48 @@
+/*
+ * drivers/media/video/samsung/mfc5/s5p_mfc_debug.h
+ *
+ * Header file for Samsung MFC (Multi Function Codec - FIMV) driver
+ * This file contains debug macros
+ *
+ * Kamil Debski, Copyright (c) 2011 Samsung Electronics
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef S5P_MFC_DEBUG_H_
+#define S5P_MFC_DEBUG_H_
+
+#define DEBUG
+
+#ifdef DEBUG
+extern int debug;
+
+#define mfc_debug(level, fmt, args...)				\
+	do {							\
+		if (debug >= level)				\
+			printk(KERN_DEBUG "%s:%d: " fmt,	\
+				__func__, __LINE__, ##args);	\
+	} while (0)
+#else
+#define mfc_debug(level, fmt, args...)
+#endif
+
+#define mfc_debug_enter() mfc_debug(5, "enter")
+#define mfc_debug_leave() mfc_debug(5, "leave")
+
+#define mfc_err(fmt, args...)				\
+	do {						\
+		printk(KERN_ERR "%s:%d: " fmt,		\
+		       __func__, __LINE__, ##args);	\
+	} while (0)
+
+#define mfc_info(fmt, args...)				\
+	do {						\
+		printk(KERN_INFO "%s:%d: " fmt,		\
+		       __func__, __LINE__, ##args);	\
+	} while (0)
+
+#endif /* S5P_MFC_DEBUG_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
new file mode 100644
index 0000000..b2c5052
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
@@ -0,0 +1,1036 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ * Kamil Debski, <k.debski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-ctrls.h>
+#include <media/videobuf2-core.h>
+#include "regs-mfc.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_dec.h"
+#include "s5p_mfc_intr.h"
+#include "s5p_mfc_opr.h"
+#include "s5p_mfc_pm.h"
+#include "s5p_mfc_shm.h"
+
+static struct s5p_mfc_fmt formats[] = {
+	{
+		.name		= "4:2:0 2 Planes 64x32 Tiles",
+		.fourcc		= V4L2_PIX_FMT_NV12MT,
+		.codec_mode	= S5P_FIMV_CODEC_NONE,
+		.type		= MFC_FMT_RAW,
+		.num_planes	= 2,
+	 },
+	{
+		.name = "4:2:0 2 Planes",
+		.fourcc = V4L2_PIX_FMT_NV12M,
+		.codec_mode = S5P_FIMV_CODEC_NONE,
+		.type = MFC_FMT_RAW,
+		.num_planes = 2,
+	},
+	{
+		.name = "H264 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_H264,
+		.codec_mode = S5P_FIMV_CODEC_H264_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "H263 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_H263,
+		.codec_mode = S5P_FIMV_CODEC_H263_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "MPEG1 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_MPEG1,
+		.codec_mode = S5P_FIMV_CODEC_MPEG2_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "MPEG2 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_MPEG2,
+		.codec_mode = S5P_FIMV_CODEC_MPEG2_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "MPEG4 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_MPEG4,
+		.codec_mode = S5P_FIMV_CODEC_MPEG4_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "XviD Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_XVID,
+		.codec_mode = S5P_FIMV_CODEC_MPEG4_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "VC1 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_VC1_ANNEX_G,
+		.codec_mode = S5P_FIMV_CODEC_VC1_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "VC1 RCV Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_VC1_ANNEX_L,
+		.codec_mode = S5P_FIMV_CODEC_VC1RCV_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+};
+
+#define NUM_FORMATS ARRAY_SIZE(formats)
+
+/* Find selected format description */
+static struct s5p_mfc_fmt *find_format(struct v4l2_format *f, unsigned int t)
+{
+	unsigned int i;
+
+	for (i = 0; i < NUM_FORMATS; i++) {
+		if (formats[i].fourcc == f->fmt.pix_mp.pixelformat &&
+		    formats[i].type == t)
+			return &formats[i];
+	}
+	return NULL;
+}
+
+static struct mfc_control controls[] = {
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H264 Display Delay",
+		.minimum = 0,
+		.maximum = 16383,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "H264 Display Delay Enable",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Mpeg4 Loop Filter Enable",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Slice Interface Enable",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Minimum number of cap bufs",
+		.minimum = 1,
+		.maximum = 32,
+		.step = 1,
+		.default_value = 1,
+		.is_volatile = 1,
+	},
+};
+
+#define NUM_CTRLS ARRAY_SIZE(controls)
+
+/* Check whether a context should be run on hardware */
+static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx)
+{
+	/* Context is to parse header */
+	if (ctx->src_queue_cnt >= 1 && ctx->state == MFCINST_GOT_INST)
+		return 1;
+	/* Context is to decode a frame */
+	if (ctx->src_queue_cnt >= 1 &&
+	    ctx->state == MFCINST_RUNNING &&
+	    ctx->dst_queue_cnt >= ctx->dpb_count)
+		return 1;
+	/* Context is to return last frame */
+	if (ctx->state == MFCINST_FINISHING &&
+	    ctx->dst_queue_cnt >= ctx->dpb_count)
+		return 1;
+	/* Context is to set buffers */
+	if (ctx->src_queue_cnt >= 1 &&
+	    ctx->state == MFCINST_HEAD_PARSED &&
+	    ctx->capture_state == QUEUE_BUFS_MMAPED)
+		return 1;
+	/* Resolution change */
+	if ((ctx->state == MFCINST_RES_CHANGE_INIT ||
+		ctx->state == MFCINST_RES_CHANGE_FLUSH) &&
+		ctx->dst_queue_cnt >= ctx->dpb_count)
+		return 1;
+	if (ctx->state == MFCINST_RES_CHANGE_END &&
+		ctx->src_queue_cnt >= 1)
+		return 1;
+	mfc_debug(2, "ctx is not ready\n");
+	return 0;
+}
+
+static struct s5p_mfc_codec_ops decoder_codec_ops = {
+	.pre_seq_start		= NULL,
+	.post_seq_start		= NULL,
+	.pre_frame_start	= NULL,
+	.post_frame_start	= NULL,
+};
+
+/* Query capabilities of the device */
+static int vidioc_querycap(struct file *file, void *priv,
+			   struct v4l2_capability *cap)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+
+	strncpy(cap->driver, dev->plat_dev->name, sizeof(cap->driver) - 1);
+	strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
+	cap->bus_info[0] = 0;
+	cap->version = KERNEL_VERSION(1, 0, 0);
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT
+						    | V4L2_CAP_STREAMING;
+	return 0;
+}
+
+/* Enumerate format */
+static int vidioc_enum_fmt(struct v4l2_fmtdesc *f, bool mplane, bool out)
+{
+	struct s5p_mfc_fmt *fmt;
+	int i, j = 0;
+
+	for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+		if (mplane && formats[i].num_planes == 1)
+			continue;
+		else if (!mplane && formats[i].num_planes > 1)
+			continue;
+		if (out && formats[i].type != MFC_FMT_DEC)
+			continue;
+		else if (!out && formats[i].type != MFC_FMT_RAW)
+			continue;
+
+		if (j == f->index)
+			break;
+		++j;
+	}
+	if (i == ARRAY_SIZE(formats))
+		return -EINVAL;
+	fmt = &formats[i];
+	strlcpy(f->description, fmt->name, sizeof(f->description));
+	f->pixelformat = fmt->fourcc;
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *pirv,
+							struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, false, false);
+}
+
+static int vidioc_enum_fmt_vid_cap_mplane(struct file *file, void *pirv,
+							struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, true, false);
+}
+
+static int vidioc_enum_fmt_vid_out(struct file *file, void *prov,
+							struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, false, true);
+}
+
+static int vidioc_enum_fmt_vid_out_mplane(struct file *file, void *prov,
+							struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, true, true);
+}
+
+/* Get format */
+static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	struct v4l2_pix_format_mplane *pix_mp;
+
+	mfc_debug_enter();
+	pix_mp = &f->fmt.pix_mp;
+	if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
+	    (ctx->state == MFCINST_GOT_INST || ctx->state ==
+						MFCINST_RES_CHANGE_END)) {
+		/* If the MFC is parsing the header,
+		 * so wait until it is finished */
+		s5p_mfc_clean_ctx_int_flags(ctx);
+		s5p_mfc_wait_for_done_ctx(ctx, S5P_FIMV_R2H_CMD_SEQ_DONE_RET,
+									0);
+	}
+	if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
+	    ctx->state >= MFCINST_HEAD_PARSED &&
+	    ctx->state < MFCINST_ABORT) {
+		/* This is run on CAPTURE (decode output) */
+		/* Width and height are set to the dimensions
+		   of the movie, the buffer is bigger and
+		   further processing stages should crop to this
+		   rectangle. */
+		pix_mp->width = ctx->buf_width;
+		pix_mp->height = ctx->buf_height;
+		pix_mp->field = V4L2_FIELD_NONE;
+		pix_mp->num_planes = 2;
+		/* Set pixelformat to the format in which MFC
+		   outputs the decoded frame */
+		pix_mp->pixelformat = V4L2_PIX_FMT_NV12MT;
+		pix_mp->plane_fmt[0].bytesperline = ctx->buf_width;
+		pix_mp->plane_fmt[0].sizeimage = ctx->luma_size;
+		pix_mp->plane_fmt[1].bytesperline = ctx->buf_width;
+		pix_mp->plane_fmt[1].sizeimage = ctx->chroma_size;
+	} else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		/* This is run on OUTPUT
+		   The buffer contains compressed image
+		   so width and height have no meaning */
+		pix_mp->width = 0;
+		pix_mp->height = 0;
+		pix_mp->field = V4L2_FIELD_NONE;
+		pix_mp->plane_fmt[0].bytesperline = ctx->dec_src_buf_size;
+		pix_mp->plane_fmt[0].sizeimage = ctx->dec_src_buf_size;
+		pix_mp->pixelformat = ctx->src_fmt->fourcc;
+		pix_mp->num_planes = ctx->src_fmt->num_planes;
+	} else {
+		mfc_err("Format could not be read\n");
+		mfc_debug(2, "%s-- with error\n", __func__);
+		return -EINVAL;
+	}
+	mfc_debug_leave();
+	return 0;
+}
+
+/* Try format */
+static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_fmt *fmt;
+
+	if (f->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		mfc_err("This node supports decoding only\n");
+		return -EINVAL;
+	}
+	fmt = find_format(f, MFC_FMT_DEC);
+	if (!fmt) {
+		mfc_err("Unsupported format\n");
+		return -EINVAL;
+	}
+	if (fmt->type != MFC_FMT_DEC) {
+		mfc_err("\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* Set format */
+static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	int ret = 0;
+	struct s5p_mfc_fmt *fmt;
+	struct v4l2_pix_format_mplane *pix_mp;
+
+	mfc_debug_enter();
+	ret = vidioc_try_fmt(file, priv, f);
+	pix_mp = &f->fmt.pix_mp;
+	if (ret)
+		return ret;
+	if (ctx->vq_src.streaming || ctx->vq_dst.streaming) {
+		v4l2_err(&dev->v4l2_dev, "%s queue busy\n", __func__);
+		ret = -EBUSY;
+		goto out;
+	}
+	fmt = find_format(f, MFC_FMT_DEC);
+	if (!fmt || fmt->codec_mode == S5P_FIMV_CODEC_NONE) {
+		mfc_err("Unknown codec\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	if (fmt->type != MFC_FMT_DEC) {
+		mfc_err("Wrong format selected, you should choose "
+					"format for decoding\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	ctx->src_fmt = fmt;
+	ctx->codec_mode = fmt->codec_mode;
+	mfc_debug(2, "The codec number is: %d\n", ctx->codec_mode);
+	pix_mp->height = 0;
+	pix_mp->width = 0;
+	if (pix_mp->plane_fmt[0].sizeimage)
+		ctx->dec_src_buf_size = pix_mp->plane_fmt[0].sizeimage;
+	else
+		pix_mp->plane_fmt[0].sizeimage = ctx->dec_src_buf_size =
+								DEF_CPB_SIZE;
+	pix_mp->plane_fmt[0].bytesperline = 0;
+	ctx->state = MFCINST_INIT;
+out:
+	mfc_debug_leave();
+	return ret;
+}
+
+/* Reqeust buffers */
+static int vidioc_reqbufs(struct file *file, void *priv,
+					  struct v4l2_requestbuffers *reqbufs)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	int ret = 0;
+	unsigned long flags;
+
+	if (reqbufs->memory != V4L2_MEMORY_MMAP) {
+		mfc_err("Only V4L2_MEMORY_MAP is supported\n");
+		return -EINVAL;
+	}
+	if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		/* Can only request buffers after an instance has been opened.*/
+		if (ctx->state == MFCINST_INIT) {
+			ctx->src_bufs_cnt = 0;
+			if (reqbufs->count == 0) {
+				mfc_debug(2, "Freeing buffers\n");
+				s5p_mfc_clock_on();
+				ret = vb2_reqbufs(&ctx->vq_src, reqbufs);
+				s5p_mfc_clock_off();
+				return ret;
+			}
+			/* Decoding */
+			if (ctx->output_state != QUEUE_FREE) {
+				mfc_err("Bufs have already been requested\n");
+				return -EINVAL;
+			}
+			s5p_mfc_clock_on();
+			ret = vb2_reqbufs(&ctx->vq_src, reqbufs);
+			s5p_mfc_clock_off();
+			if (ret) {
+				mfc_err("vb2_reqbufs on output failed\n");
+				return ret;
+			}
+			mfc_debug(2, "vb2_reqbufs: %d\n", ret);
+			ctx->output_state = QUEUE_BUFS_REQUESTED;
+		}
+	} else if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		ctx->dst_bufs_cnt = 0;
+		if (reqbufs->count == 0) {
+			mfc_debug(2, "Freeing buffers\n");
+			s5p_mfc_clock_on();
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			s5p_mfc_clock_off();
+			return ret;
+		}
+		if (ctx->capture_state != QUEUE_FREE) {
+			mfc_err("Bufs have already been requested\n");
+			return -EINVAL;
+		}
+		ctx->capture_state = QUEUE_BUFS_REQUESTED;
+		s5p_mfc_clock_on();
+		ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+		s5p_mfc_clock_off();
+		if (ret) {
+			mfc_err("vb2_reqbufs on capture failed\n");
+			return ret;
+		}
+		if (reqbufs->count < ctx->dpb_count) {
+			mfc_err("Not enough buffers allocated\n");
+			reqbufs->count = 0;
+			s5p_mfc_clock_on();
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			s5p_mfc_clock_off();
+			return -ENOMEM;
+		}
+		ctx->total_dpb_count = reqbufs->count;
+		ret = s5p_mfc_alloc_codec_buffers(ctx);
+		if (ret) {
+			mfc_err("Failed to allocate decoding buffers\n");
+			reqbufs->count = 0;
+			s5p_mfc_clock_on();
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			s5p_mfc_clock_off();
+			return -ENOMEM;
+		}
+		if (ctx->dst_bufs_cnt == ctx->total_dpb_count) {
+			ctx->capture_state = QUEUE_BUFS_MMAPED;
+		} else {
+			mfc_err("Not all buffers passed to buf_init\n");
+			reqbufs->count = 0;
+			s5p_mfc_clock_on();
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			s5p_mfc_release_codec_buffers(ctx);
+			s5p_mfc_clock_off();
+			return -ENOMEM;
+		}
+		if (s5p_mfc_ctx_ready(ctx)) {
+			spin_lock_irqsave(&dev->condlock, flags);
+			set_bit(ctx->num, &dev->ctx_work_bits);
+			spin_unlock_irqrestore(&dev->condlock, flags);
+		}
+		s5p_mfc_try_run(dev);
+		s5p_mfc_wait_for_done_ctx(ctx,
+					 S5P_FIMV_R2H_CMD_INIT_BUFFERS_RET, 0);
+	}
+	return ret;
+}
+
+/* Query buffer */
+static int vidioc_querybuf(struct file *file, void *priv,
+						   struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	int ret;
+	int i;
+
+	if (buf->memory != V4L2_MEMORY_MMAP) {
+		mfc_err("Only mmaped buffers can be used\n");
+		return -EINVAL;
+	}
+	mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type);
+	if (ctx->state == MFCINST_INIT &&
+			buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		ret = vb2_querybuf(&ctx->vq_src, buf);
+	} else if (ctx->state == MFCINST_RUNNING &&
+			buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		ret = vb2_querybuf(&ctx->vq_dst, buf);
+		for (i = 0; i < buf->length; i++)
+			buf->m.planes[i].m.mem_offset += DST_QUEUE_OFF_BASE;
+	} else {
+		mfc_err("vidioc_querybuf called in an inappropriate state\n");
+		ret = -EINVAL;
+	}
+	mfc_debug_leave();
+	return ret;
+}
+
+/* Queue a buffer */
+static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (ctx->state == MFCINST_ERROR) {
+		mfc_err("Call on QBUF after unrecoverable error\n");
+		return -EIO;
+	}
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_qbuf(&ctx->vq_src, buf);
+	else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_qbuf(&ctx->vq_dst, buf);
+	return -EINVAL;
+}
+
+/* Dequeue a buffer */
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (ctx->state == MFCINST_ERROR) {
+		mfc_err("Call on DQBUF after unrecoverable error\n");
+		return -EIO;
+	}
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_dqbuf(&ctx->vq_src, buf, file->f_flags & O_NONBLOCK);
+	else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_dqbuf(&ctx->vq_dst, buf, file->f_flags & O_NONBLOCK);
+	return -EINVAL;
+}
+
+/* Stream on */
+static int vidioc_streamon(struct file *file, void *priv,
+			   enum v4l2_buf_type type)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	mfc_debug_enter();
+	if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+
+		if (ctx->state == MFCINST_INIT) {
+			ctx->dst_bufs_cnt = 0;
+			ctx->src_bufs_cnt = 0;
+			ctx->capture_state = QUEUE_FREE;
+			ctx->output_state = QUEUE_FREE;
+			s5p_mfc_alloc_instance_buffer(ctx);
+			s5p_mfc_alloc_dec_temp_buffers(ctx);
+			spin_lock_irqsave(&dev->condlock, flags);
+			set_bit(ctx->num, &dev->ctx_work_bits);
+			spin_unlock_irqrestore(&dev->condlock, flags);
+			s5p_mfc_clean_ctx_int_flags(ctx);
+			s5p_mfc_try_run(dev);
+
+			if (s5p_mfc_wait_for_done_ctx(ctx,
+				S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET, 0)) {
+				/* Error or timeout */
+				mfc_err("Error getting instance from hardware\n");
+				s5p_mfc_release_instance_buffer(ctx);
+				s5p_mfc_release_dec_desc_buffer(ctx);
+				return -EIO;
+			}
+			mfc_debug(2, "Got instance number: %d\n", ctx->inst_no);
+		}
+		ret = vb2_streamon(&ctx->vq_src, type);
+		}
+	else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		ret = vb2_streamon(&ctx->vq_dst, type);
+	mfc_debug_leave();
+	return ret;
+}
+
+/* Stream off, which equals to a pause */
+static int vidioc_streamoff(struct file *file, void *priv,
+			    enum v4l2_buf_type type)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_streamoff(&ctx->vq_src, type);
+	else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_streamoff(&ctx->vq_dst, type);
+	return -EINVAL;
+}
+
+/* Set controls - v4l2 control framework */
+static int s5p_mfc_dec_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct s5p_mfc_ctx *ctx = ctrl_to_ctx(ctrl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY:
+		ctx->loop_filter_mpeg4 = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE:
+		ctx->display_delay_enable = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:
+		ctx->display_delay = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:
+		ctx->slice_interface = ctrl->val;
+		break;
+	default:
+		mfc_err("Invalid control 0x%08x\n", ctrl->id);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int s5p_mfc_dec_g_v_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct s5p_mfc_ctx *ctx = ctrl_to_ctx(ctrl);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	switch (ctrl->id) {
+	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
+		if (ctx->state >= MFCINST_HEAD_PARSED &&
+		    ctx->state < MFCINST_ABORT) {
+			ctrl->val = ctx->dpb_count;
+			break;
+		} else if (ctx->state != MFCINST_INIT) {
+			v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n");
+			return -EINVAL;
+		}
+		/* Should wait for the header to be parsed */
+		s5p_mfc_clean_ctx_int_flags(ctx);
+		s5p_mfc_wait_for_done_ctx(ctx,
+				S5P_FIMV_R2H_CMD_SEQ_DONE_RET, 0);
+		if (ctx->state >= MFCINST_HEAD_PARSED &&
+		    ctx->state < MFCINST_ABORT) {
+			ctrl->val = ctx->dpb_count;
+		} else {
+			v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n");
+			return -EINVAL;
+		}
+		break;
+	}
+	return 0;
+}
+
+
+static const struct v4l2_ctrl_ops s5p_mfc_dec_ctrl_ops = {
+	.s_ctrl = s5p_mfc_dec_s_ctrl,
+	.g_volatile_ctrl = s5p_mfc_dec_g_v_ctrl,
+};
+
+/* Get cropping information */
+static int vidioc_g_crop(struct file *file, void *priv,
+		struct v4l2_crop *cr)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	u32 left, right, top, bottom;
+
+	if (ctx->state != MFCINST_HEAD_PARSED &&
+	ctx->state != MFCINST_RUNNING && ctx->state != MFCINST_FINISHING
+					&& ctx->state != MFCINST_FINISHED) {
+			mfc_err("Cannont set crop\n");
+			return -EINVAL;
+		}
+	if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_H264) {
+		left = s5p_mfc_read_shm(ctx, CROP_INFO_H);
+		right = left >> S5P_FIMV_SHARED_CROP_RIGHT_SHIFT;
+		left = left & S5P_FIMV_SHARED_CROP_LEFT_MASK;
+		top = s5p_mfc_read_shm(ctx, CROP_INFO_V);
+		bottom = top >> S5P_FIMV_SHARED_CROP_BOTTOM_SHIFT;
+		top = top & S5P_FIMV_SHARED_CROP_TOP_MASK;
+		cr->c.left = left;
+		cr->c.top = top;
+		cr->c.width = ctx->img_width - left - right;
+		cr->c.height = ctx->img_height - top - bottom;
+		mfc_debug(2, "Cropping info [h264]: l=%d t=%d "
+			"w=%d h=%d (r=%d b=%d fw=%d fh=%d\n", left, top,
+			cr->c.width, cr->c.height, right, bottom,
+			ctx->buf_width, ctx->buf_height);
+	} else {
+		cr->c.left = 0;
+		cr->c.top = 0;
+		cr->c.width = ctx->img_width;
+		cr->c.height = ctx->img_height;
+		mfc_debug(2, "Cropping info: w=%d h=%d fw=%d "
+			"fh=%d\n", cr->c.width,	cr->c.height, ctx->buf_width,
+							ctx->buf_height);
+	}
+	return 0;
+}
+
+/* v4l2_ioctl_ops */
+static const struct v4l2_ioctl_ops s5p_mfc_dec_ioctl_ops = {
+	.vidioc_querycap = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap_mplane = vidioc_enum_fmt_vid_cap_mplane,
+	.vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out,
+	.vidioc_enum_fmt_vid_out_mplane = vidioc_enum_fmt_vid_out_mplane,
+	.vidioc_g_fmt_vid_cap_mplane = vidioc_g_fmt,
+	.vidioc_g_fmt_vid_out_mplane = vidioc_g_fmt,
+	.vidioc_try_fmt_vid_cap_mplane = vidioc_try_fmt,
+	.vidioc_try_fmt_vid_out_mplane = vidioc_try_fmt,
+	.vidioc_s_fmt_vid_cap_mplane = vidioc_s_fmt,
+	.vidioc_s_fmt_vid_out_mplane = vidioc_s_fmt,
+	.vidioc_reqbufs = vidioc_reqbufs,
+	.vidioc_querybuf = vidioc_querybuf,
+	.vidioc_qbuf = vidioc_qbuf,
+	.vidioc_dqbuf = vidioc_dqbuf,
+	.vidioc_streamon = vidioc_streamon,
+	.vidioc_streamoff = vidioc_streamoff,
+	.vidioc_g_crop = vidioc_g_crop,
+};
+
+static int s5p_mfc_queue_setup(struct vb2_queue *vq, unsigned int *buf_count,
+			       unsigned int *plane_count, unsigned long psize[],
+			       void *allocators[])
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+
+	/* Video output for decoding (source)
+	 * this can be set after getting an instance */
+	if (ctx->state == MFCINST_INIT &&
+	    vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		/* A single plane is required for input */
+		*plane_count = 1;
+		if (*buf_count < 1)
+			*buf_count = 1;
+		if (*buf_count > MFC_MAX_BUFFERS)
+			*buf_count = MFC_MAX_BUFFERS;
+	/* Video capture for decoding (destination)
+	 * this can be set after the header was parsed */
+	} else if (ctx->state == MFCINST_HEAD_PARSED &&
+		   vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		/* Output plane count is 2 - one for Y and one for CbCr */
+		*plane_count = 2;
+		/* Setup buffer count */
+		if (*buf_count < ctx->dpb_count)
+			*buf_count = ctx->dpb_count;
+		if (*buf_count > ctx->dpb_count + MFC_MAX_EXTRA_DPB)
+			*buf_count = ctx->dpb_count + MFC_MAX_EXTRA_DPB;
+		if (*buf_count > MFC_MAX_BUFFERS)
+			*buf_count = MFC_MAX_BUFFERS;
+	} else {
+		mfc_err("State seems invalid. State = %d, vq->type = %d\n",
+							ctx->state, vq->type);
+		return -EINVAL;
+	}
+	mfc_debug(2, "Buffer count=%d, plane count=%d\n",
+						*buf_count, *plane_count);
+	if (ctx->state == MFCINST_HEAD_PARSED &&
+	    vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		psize[0] = ctx->luma_size;
+		psize[1] = ctx->chroma_size;
+		allocators[0] = ctx->dev->alloc_ctx[MFC_BANK2_ALLOC_CTX];
+		allocators[1] = ctx->dev->alloc_ctx[MFC_BANK1_ALLOC_CTX];
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE &&
+		   ctx->state == MFCINST_INIT) {
+		psize[0] = ctx->dec_src_buf_size;
+		allocators[0] = ctx->dev->alloc_ctx[MFC_BANK1_ALLOC_CTX];
+	} else {
+		mfc_err("This video node is dedicated to decoding. Decoding not initalised\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void s5p_mfc_unlock(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mutex_unlock(&dev->mfc_mutex);
+}
+
+static void s5p_mfc_lock(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mutex_lock(&dev->mfc_mutex);
+}
+
+static int s5p_mfc_buf_init(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+	unsigned int i;
+
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		if (ctx->capture_state == QUEUE_BUFS_MMAPED)
+			return 0;
+		for (i = 0; i <= ctx->src_fmt->num_planes ; i++) {
+			if (IS_ERR_OR_NULL(ERR_PTR(
+					vb2_dma_contig_plane_paddr(vb, i)))) {
+				mfc_err("Plane mem not allocated\n");
+				return -EINVAL;
+			}
+		}
+		if (vb2_plane_size(vb, 0) < ctx->luma_size ||
+			vb2_plane_size(vb, 1) < ctx->chroma_size) {
+			mfc_err("Plane buffer (CAPTURE) is too small\n");
+			return -EINVAL;
+		}
+		i = vb->v4l2_buf.index;
+		ctx->dst_bufs[i].b = vb;
+		ctx->dst_bufs[i].cookie.raw.luma =
+					vb2_dma_contig_plane_paddr(vb, 0);
+		ctx->dst_bufs[i].cookie.raw.chroma =
+					vb2_dma_contig_plane_paddr(vb, 1);
+		ctx->dst_bufs_cnt++;
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		if (IS_ERR_OR_NULL(ERR_PTR(
+					vb2_dma_contig_plane_paddr(vb, 0)))) {
+			mfc_err("Plane memory not allocated\n");
+			return -EINVAL;
+		}
+		if (vb2_plane_size(vb, 0) < ctx->dec_src_buf_size) {
+			mfc_err("Plane buffer (OUTPUT) is too small\n");
+			return -EINVAL;
+		}
+
+		i = vb->v4l2_buf.index;
+		ctx->src_bufs[i].b = vb;
+		ctx->src_bufs[i].cookie.stream =
+					vb2_dma_contig_plane_paddr(vb, 0);
+		ctx->src_bufs_cnt++;
+	} else {
+		mfc_err("s5p_mfc_buf_init: unknown queue type\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int s5p_mfc_start_streaming(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+
+	v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
+	if (ctx->state == MFCINST_FINISHING ||
+		ctx->state == MFCINST_FINISHED)
+		ctx->state = MFCINST_RUNNING;
+	/* If context is ready then dev = work->data;schedule it to run */
+	if (s5p_mfc_ctx_ready(ctx)) {
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+	}
+	s5p_mfc_try_run(dev);
+	return 0;
+}
+
+static int s5p_mfc_stop_streaming(struct vb2_queue *q)
+{
+	unsigned long flags;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	int aborted = 0;
+
+	if ((ctx->state == MFCINST_FINISHING ||
+		ctx->state ==  MFCINST_RUNNING) &&
+		dev->curr_ctx == ctx->num && dev->hw_lock) {
+		ctx->state = MFCINST_ABORT;
+		s5p_mfc_wait_for_done_ctx(ctx,
+					S5P_FIMV_R2H_CMD_FRAME_DONE_RET, 0);
+		aborted = 1;
+	}
+	spin_lock_irqsave(&dev->irqlock, flags);
+	if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst);
+		INIT_LIST_HEAD(&ctx->dst_queue);
+		ctx->dst_queue_cnt = 0;
+		ctx->dpb_flush_flag = 1;
+		ctx->dec_dst_flag = 0;
+	}
+	if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src);
+		INIT_LIST_HEAD(&ctx->src_queue);
+		ctx->src_queue_cnt = 0;
+	}
+	if (aborted)
+		ctx->state = MFCINST_RUNNING;
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	return 0;
+}
+
+
+static void s5p_mfc_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *mfc_buf;
+
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		mfc_buf = &ctx->src_bufs[vb->v4l2_buf.index];
+		mfc_buf->used = 0;
+		spin_lock_irqsave(&dev->irqlock, flags);
+		list_add_tail(&mfc_buf->list, &ctx->src_queue);
+		ctx->src_queue_cnt++;
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		mfc_buf = &ctx->dst_bufs[vb->v4l2_buf.index];
+		mfc_buf->used = 0;
+		/* Mark destination as available for use by MFC */
+		spin_lock_irqsave(&dev->irqlock, flags);
+		set_bit(vb->v4l2_buf.index, &ctx->dec_dst_flag);
+		list_add_tail(&mfc_buf->list, &ctx->dst_queue);
+		ctx->dst_queue_cnt++;
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+	} else {
+		mfc_err("Unsupported buffer type (%d)\n", vq->type);
+	}
+	if (s5p_mfc_ctx_ready(ctx)) {
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+	}
+	s5p_mfc_try_run(dev);
+}
+
+static struct vb2_ops s5p_mfc_dec_qops = {
+	.queue_setup		= s5p_mfc_queue_setup,
+	.wait_prepare		= s5p_mfc_unlock,
+	.wait_finish		= s5p_mfc_lock,
+	.buf_init		= s5p_mfc_buf_init,
+	.start_streaming	= s5p_mfc_start_streaming,
+	.stop_streaming		= s5p_mfc_stop_streaming,
+	.buf_queue		= s5p_mfc_buf_queue,
+};
+
+struct s5p_mfc_codec_ops *get_dec_codec_ops(void)
+{
+	return &decoder_codec_ops;
+}
+
+struct vb2_ops *get_dec_queue_ops(void)
+{
+	return &s5p_mfc_dec_qops;
+}
+
+const struct v4l2_ioctl_ops *get_dec_v4l2_ioctl_ops(void)
+{
+	return &s5p_mfc_dec_ioctl_ops;
+}
+
+#define IS_MFC51_PRIV(x) ((V4L2_CTRL_ID2CLASS(x) == V4L2_CTRL_CLASS_MPEG) \
+						&& V4L2_CTRL_DRIVER_PRIV(x))
+
+int s5p_mfc_dec_ctrls_setup(struct s5p_mfc_ctx *ctx)
+{
+	struct v4l2_ctrl_config cfg;
+	int i;
+
+	v4l2_ctrl_handler_init(&ctx->ctrl_handler, NUM_CTRLS);
+	if (ctx->ctrl_handler.error) {
+		mfc_err("v4l2_ctrl_handler_init failed\n");
+		return ctx->ctrl_handler.error;
+	}
+
+	for (i = 0; i < NUM_CTRLS; i++) {
+		if (IS_MFC51_PRIV(controls[i].id)) {
+			cfg.ops = &s5p_mfc_dec_ctrl_ops;
+			cfg.id = controls[i].id;
+			cfg.min = controls[i].minimum;
+			cfg.max = controls[i].maximum;
+			cfg.def = controls[i].default_value;
+			cfg.name = controls[i].name;
+			cfg.type = controls[i].type;
+
+			cfg.step = controls[i].step;
+			cfg.menu_skip_mask = 0;
+
+			ctx->ctrls[i] = v4l2_ctrl_new_custom(&ctx->ctrl_handler,
+					&cfg, NULL);
+		} else {
+			ctx->ctrls[i] = v4l2_ctrl_new_std(&ctx->ctrl_handler,
+					&s5p_mfc_dec_ctrl_ops,
+					controls[i].id, controls[i].minimum,
+					controls[i].maximum, controls[i].step,
+					controls[i].default_value);
+		}
+		if (ctx->ctrl_handler.error) {
+			mfc_err("Adding control (%d) failed\n", i);
+			return ctx->ctrl_handler.error;
+		}
+		if (controls[i].is_volatile && ctx->ctrls[i])
+			ctx->ctrls[i]->is_volatile = 1;
+	}
+	return 0;
+}
+
+void s5p_mfc_dec_ctrls_delete(struct s5p_mfc_ctx *ctx)
+{
+	int i;
+
+	v4l2_ctrl_handler_free(&ctx->ctrl_handler);
+	for (i = 0; i < NUM_CTRLS; i++)
+		ctx->ctrls[i] = NULL;
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.h b/drivers/media/video/s5p-mfc/s5p_mfc_dec.h
new file mode 100644
index 0000000..fb8b215
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.h
@@ -0,0 +1,23 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_dec.h
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_DEC_H_
+#define S5P_MFC_DEC_H_
+
+struct s5p_mfc_codec_ops *get_dec_codec_ops(void);
+struct vb2_ops *get_dec_queue_ops(void);
+const struct v4l2_ioctl_ops *get_dec_v4l2_ioctl_ops(void);
+struct s5p_mfc_fmt *get_dec_def_fmt(bool src);
+int s5p_mfc_dec_ctrls_setup(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_dec_ctrls_delete(struct s5p_mfc_ctx *ctx);
+
+#endif /* S5P_MFC_DEC_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
new file mode 100644
index 0000000..fee094a
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
@@ -0,0 +1,1829 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Jeongtae Park	<jtp.park@samsung.com>
+ * Kamil Debski		<k.debski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-ctrls.h>
+#include <media/videobuf2-core.h>
+#include "regs-mfc.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_enc.h"
+#include "s5p_mfc_intr.h"
+#include "s5p_mfc_opr.h"
+
+static struct s5p_mfc_fmt formats[] = {
+	{
+		.name = "4:2:0 2 Planes 64x32 Tiles",
+		.fourcc = V4L2_PIX_FMT_NV12MT,
+		.codec_mode = S5P_FIMV_CODEC_NONE,
+		.type = MFC_FMT_RAW,
+		.num_planes = 2,
+	},
+	{
+		.name = "4:2:0 2 Planes",
+		.fourcc = V4L2_PIX_FMT_NV12M,
+		.codec_mode = S5P_FIMV_CODEC_NONE,
+		.type = MFC_FMT_RAW,
+		.num_planes = 2,
+	},
+	{
+		.name = "H264 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_H264,
+		.codec_mode = S5P_FIMV_CODEC_H264_ENC,
+		.type = MFC_FMT_ENC,
+		.num_planes = 1,
+	},
+	{
+		.name = "MPEG4 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_MPEG4,
+		.codec_mode = S5P_FIMV_CODEC_MPEG4_ENC,
+		.type = MFC_FMT_ENC,
+		.num_planes = 1,
+	},
+	{
+		.name = "H264 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_H263,
+		.codec_mode = S5P_FIMV_CODEC_H263_ENC,
+		.type = MFC_FMT_ENC,
+		.num_planes = 1,
+	},
+};
+
+#define NUM_FORMATS ARRAY_SIZE(formats)
+static struct s5p_mfc_fmt *find_format(struct v4l2_format *f, unsigned int t)
+{
+	unsigned int i;
+
+	for (i = 0; i < NUM_FORMATS; i++) {
+		if (formats[i].fourcc == f->fmt.pix_mp.pixelformat &&
+		    formats[i].type == t)
+			return &formats[i];
+	}
+	return NULL;
+}
+
+static struct mfc_control controls[] = {
+	{
+		.id = V4L2_CID_MPEG_VIDEO_GOP_SIZE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE,
+		.maximum = V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES,
+		.default_value = V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 1,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 1900,
+		.maximum = (1 << 30) - 1,
+		.step = 1,
+		.default_value = 1900,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_PADDING,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Padding Control Enable",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Padding Color YUV Value",
+		.minimum = 0,
+		.maximum = (1 << 25) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_BITRATE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 1,
+		.maximum = (1 << 30) - 1,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Rate Control Reaction Coeff.",
+		.minimum = 1,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.name = "Force frame type",
+		.minimum = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED,
+		.maximum = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED,
+		.default_value = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_VBV_SIZE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_HEADER_MODE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE,
+		.maximum = V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME,
+		.default_value = V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.name = "Frame Skip Enable",
+		.minimum = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED,
+		.maximum = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT,
+		.menu_skip_mask = 0,
+		.default_value = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Fixed Target Bit Enable",
+		.minimum = 0,
+		.maximum = 1,
+		.default_value = 0,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_B_FRAMES,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 2,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE,
+		.maximum = V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH,
+		.default_value = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE,
+		.menu_skip_mask = ~(
+				(1 << V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) |
+				(1 << V4L2_MPEG_VIDEO_H264_PROFILE_MAIN) |
+				(1 << V4L2_MPEG_VIDEO_H264_PROFILE_HIGH)
+				),
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_LEVEL,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
+		.maximum = V4L2_MPEG_VIDEO_H264_LEVEL_4_0,
+		.default_value = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
+		.menu_skip_mask = ~(
+				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_1) |
+				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_2) |
+				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_0) |
+				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_1)
+				),
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_MPEG4_LEVEL_0,
+		.maximum = V4L2_MPEG_VIDEO_MPEG4_LEVEL_5,
+		.default_value = V4L2_MPEG_VIDEO_MPEG4_LEVEL_0,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED,
+		.maximum = V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY,
+		.default_value = V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = -6,
+		.maximum = 6,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = -6,
+		.maximum = 6,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC,
+		.maximum = V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC,
+		.default_value = V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "The Number of Ref. Pic for P",
+		.minimum = 1,
+		.maximum = 2,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_MIN_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_MAX_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H263 I-Frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H263_MIN_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H263 Minimum QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H263_MAX_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H263 Maximum QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H263 P frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H263 B frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "MPEG4 I-Frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "MPEG4 Minimum QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "MPEG4 Maximum QP value",
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "MPEG4 P frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "MPEG4 B frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "H264 Dark Reg Adaptive RC",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "H264 Smooth Reg Adaptive RC",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "H264 Static Reg Adaptive RC",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "H264 Activity Reg Adaptive RC",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
+		.maximum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED,
+		.default_value = 0,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_GOP_CLOSURE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_I_PERIOD,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
+		.maximum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE,
+		.default_value = 0,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_QPEL,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+};
+
+#define NUM_CTRLS ARRAY_SIZE(controls)
+static const char * const *mfc51_get_menu(u32 id)
+{
+	static const char * const mfc51_video_frame_skip[] = {
+		"Disabled",
+		"Level Limit",
+		"VBV/CPB Limit",
+		NULL,
+	};
+	static const char * const mfc51_video_force_frame[] = {
+		"Disabled",
+		"I Frame",
+		"Not Coded",
+		NULL,
+	};
+	switch (id) {
+	case V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE:
+		return mfc51_video_frame_skip;
+	case V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE:
+		return mfc51_video_force_frame;
+	}
+	return NULL;
+}
+
+static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx)
+{
+	mfc_debug(2, "src=%d, dst=%d, state=%d\n",
+		  ctx->src_queue_cnt, ctx->dst_queue_cnt, ctx->state);
+	/* context is ready to make header */
+	if (ctx->state == MFCINST_GOT_INST && ctx->dst_queue_cnt >= 1)
+		return 1;
+	/* context is ready to encode a frame */
+	if (ctx->state == MFCINST_RUNNING &&
+		ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1)
+		return 1;
+	/* context is ready to encode remain frames */
+	if (ctx->state == MFCINST_FINISHING &&
+		ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1)
+		return 1;
+	mfc_debug(2, "ctx is not ready\n");
+	return 0;
+}
+
+static void cleanup_ref_queue(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_buf *mb_entry;
+	unsigned long mb_y_addr, mb_c_addr;
+
+	/* move buffers in ref queue to src queue */
+	while (!list_empty(&ctx->ref_queue)) {
+		mb_entry = list_entry((&ctx->ref_queue)->next,
+						struct s5p_mfc_buf, list);
+		mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0);
+		mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1);
+		list_del(&mb_entry->list);
+		ctx->ref_queue_cnt--;
+		list_add_tail(&mb_entry->list, &ctx->src_queue);
+		ctx->src_queue_cnt++;
+	}
+	mfc_debug(2, "enc src count: %d, enc ref count: %d\n",
+		  ctx->src_queue_cnt, ctx->ref_queue_cnt);
+	INIT_LIST_HEAD(&ctx->ref_queue);
+	ctx->ref_queue_cnt = 0;
+}
+
+static int enc_pre_seq_start(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf *dst_mb;
+	unsigned long dst_addr;
+	unsigned int dst_size;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
+	dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+	dst_size = vb2_plane_size(dst_mb->b, 0);
+	s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	return 0;
+}
+
+static int enc_post_seq_start(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	struct s5p_mfc_buf *dst_mb;
+	unsigned long flags;
+
+	if (p->seq_hdr_mode == V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE) {
+		spin_lock_irqsave(&dev->irqlock, flags);
+		dst_mb = list_entry(ctx->dst_queue.next,
+				struct s5p_mfc_buf, list);
+		list_del(&dst_mb->list);
+		ctx->dst_queue_cnt--;
+		vb2_set_plane_payload(dst_mb->b, 0,
+						s5p_mfc_get_enc_strm_size());
+		vb2_buffer_done(dst_mb->b, VB2_BUF_STATE_DONE);
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+	}
+	ctx->state = MFCINST_RUNNING;
+	if (s5p_mfc_ctx_ready(ctx)) {
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+	}
+	s5p_mfc_try_run(dev);
+	return 0;
+}
+
+static int enc_pre_frame_start(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf *dst_mb;
+	struct s5p_mfc_buf *src_mb;
+	unsigned long flags;
+	unsigned long src_y_addr, src_c_addr, dst_addr;
+	unsigned int dst_size;
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	src_y_addr = vb2_dma_contig_plane_paddr(src_mb->b, 0);
+	src_c_addr = vb2_dma_contig_plane_paddr(src_mb->b, 1);
+	s5p_mfc_set_enc_frame_buffer(ctx, src_y_addr, src_c_addr);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
+	dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+	dst_size = vb2_plane_size(dst_mb->b, 0);
+	s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+
+	return 0;
+}
+
+static int enc_post_frame_start(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf *mb_entry;
+	unsigned long enc_y_addr, enc_c_addr;
+	unsigned long mb_y_addr, mb_c_addr;
+	int slice_type;
+	unsigned int strm_size;
+	unsigned long flags;
+
+	slice_type = s5p_mfc_get_enc_slice_type();
+	strm_size = s5p_mfc_get_enc_strm_size();
+	mfc_debug(2, "Encoded slice type: %d", slice_type);
+	mfc_debug(2, "Encoded stream size: %d", strm_size);
+	mfc_debug(2, "Display order: %d",
+		  mfc_read(dev, S5P_FIMV_ENC_SI_PIC_CNT));
+	spin_lock_irqsave(&dev->irqlock, flags);
+	if (slice_type >= 0) {
+		s5p_mfc_get_enc_frame_buffer(ctx, &enc_y_addr, &enc_c_addr);
+		list_for_each_entry(mb_entry, &ctx->src_queue, list) {
+			mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0);
+			mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1);
+			if ((enc_y_addr == mb_y_addr) &&
+						(enc_c_addr == mb_c_addr)) {
+				list_del(&mb_entry->list);
+				ctx->src_queue_cnt--;
+				vb2_buffer_done(mb_entry->b,
+							VB2_BUF_STATE_DONE);
+				break;
+			}
+		}
+		list_for_each_entry(mb_entry, &ctx->ref_queue, list) {
+			mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0);
+			mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1);
+			if ((enc_y_addr == mb_y_addr) &&
+						(enc_c_addr == mb_c_addr)) {
+				list_del(&mb_entry->list);
+				ctx->ref_queue_cnt--;
+				vb2_buffer_done(mb_entry->b,
+							VB2_BUF_STATE_DONE);
+				break;
+			}
+		}
+	}
+	if ((ctx->src_queue_cnt > 0) && (ctx->state == MFCINST_RUNNING)) {
+		mb_entry = list_entry(ctx->src_queue.next, struct s5p_mfc_buf,
+									list);
+		if (mb_entry->used) {
+			list_del(&mb_entry->list);
+			ctx->src_queue_cnt--;
+			list_add_tail(&mb_entry->list, &ctx->ref_queue);
+			ctx->ref_queue_cnt++;
+		}
+		mfc_debug(2, "enc src count: %d, enc ref count: %d\n",
+			  ctx->src_queue_cnt, ctx->ref_queue_cnt);
+	}
+	if (strm_size > 0) {
+		/* at least one more dest. buffers exist always  */
+		mb_entry = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf,
+									list);
+		list_del(&mb_entry->list);
+		ctx->dst_queue_cnt--;
+		switch (slice_type) {
+		case S5P_FIMV_ENC_SI_SLICE_TYPE_I:
+			mb_entry->b->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME;
+			break;
+		case S5P_FIMV_ENC_SI_SLICE_TYPE_P:
+			mb_entry->b->v4l2_buf.flags |= V4L2_BUF_FLAG_PFRAME;
+			break;
+		case S5P_FIMV_ENC_SI_SLICE_TYPE_B:
+			mb_entry->b->v4l2_buf.flags |= V4L2_BUF_FLAG_BFRAME;
+			break;
+		}
+		vb2_set_plane_payload(mb_entry->b, 0, strm_size);
+		vb2_buffer_done(mb_entry->b, VB2_BUF_STATE_DONE);
+	}
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	if ((ctx->src_queue_cnt == 0) || (ctx->dst_queue_cnt == 0)) {
+		spin_lock(&dev->condlock);
+		clear_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock(&dev->condlock);
+	}
+	return 0;
+}
+
+static struct s5p_mfc_codec_ops encoder_codec_ops = {
+	.pre_seq_start		= enc_pre_seq_start,
+	.post_seq_start		= enc_post_seq_start,
+	.pre_frame_start	= enc_pre_frame_start,
+	.post_frame_start	= enc_post_frame_start,
+};
+
+/* Query capabilities of the device */
+static int vidioc_querycap(struct file *file, void *priv,
+			   struct v4l2_capability *cap)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+
+	strncpy(cap->driver, dev->plat_dev->name, sizeof(cap->driver) - 1);
+	strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
+	cap->bus_info[0] = 0;
+	cap->version = KERNEL_VERSION(1, 0, 0);
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
+			  | V4L2_CAP_VIDEO_OUTPUT
+			  | V4L2_CAP_STREAMING;
+	return 0;
+}
+
+static int vidioc_enum_fmt(struct v4l2_fmtdesc *f, bool mplane, bool out)
+{
+	struct s5p_mfc_fmt *fmt;
+	int i, j = 0;
+
+	for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+		if (mplane && formats[i].num_planes == 1)
+			continue;
+		else if (!mplane && formats[i].num_planes > 1)
+			continue;
+		if (out && formats[i].type != MFC_FMT_RAW)
+			continue;
+		else if (!out && formats[i].type != MFC_FMT_ENC)
+			continue;
+		if (j == f->index) {
+			fmt = &formats[i];
+			strlcpy(f->description, fmt->name,
+				sizeof(f->description));
+			f->pixelformat = fmt->fourcc;
+			return 0;
+		}
+		++j;
+	}
+	return -EINVAL;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *pirv,
+				   struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, false, false);
+}
+
+static int vidioc_enum_fmt_vid_cap_mplane(struct file *file, void *pirv,
+					  struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, true, false);
+}
+
+static int vidioc_enum_fmt_vid_out(struct file *file, void *prov,
+				   struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, false, true);
+}
+
+static int vidioc_enum_fmt_vid_out_mplane(struct file *file, void *prov,
+					  struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, true, true);
+}
+
+static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
+
+	mfc_debug(2, "f->type = %d ctx->state = %d\n", f->type, ctx->state);
+	if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		/* This is run on output (encoder dest) */
+		pix_fmt_mp->width = 0;
+		pix_fmt_mp->height = 0;
+		pix_fmt_mp->field = V4L2_FIELD_NONE;
+		pix_fmt_mp->pixelformat = ctx->dst_fmt->fourcc;
+		pix_fmt_mp->num_planes = ctx->dst_fmt->num_planes;
+
+		pix_fmt_mp->plane_fmt[0].bytesperline = ctx->enc_dst_buf_size;
+		pix_fmt_mp->plane_fmt[0].sizeimage = ctx->enc_dst_buf_size;
+	} else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		/* This is run on capture (encoder src) */
+		pix_fmt_mp->width = ctx->img_width;
+		pix_fmt_mp->height = ctx->img_height;
+
+		pix_fmt_mp->field = V4L2_FIELD_NONE;
+		pix_fmt_mp->pixelformat = ctx->src_fmt->fourcc;
+		pix_fmt_mp->num_planes = ctx->src_fmt->num_planes;
+
+		pix_fmt_mp->plane_fmt[0].bytesperline = ctx->buf_width;
+		pix_fmt_mp->plane_fmt[0].sizeimage = ctx->luma_size;
+		pix_fmt_mp->plane_fmt[1].bytesperline = ctx->buf_width;
+		pix_fmt_mp->plane_fmt[1].sizeimage = ctx->chroma_size;
+	} else {
+		mfc_err("invalid buf type\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_fmt *fmt;
+	struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
+
+	if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		fmt = find_format(f, MFC_FMT_ENC);
+		if (!fmt) {
+			mfc_err("failed to try output format\n");
+			return -EINVAL;
+		}
+
+		if (pix_fmt_mp->plane_fmt[0].sizeimage == 0) {
+			mfc_err("must be set encoding output size\n");
+			return -EINVAL;
+		}
+
+		pix_fmt_mp->plane_fmt[0].bytesperline =
+			pix_fmt_mp->plane_fmt[0].sizeimage;
+	} else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		fmt = find_format(f, MFC_FMT_RAW);
+		if (!fmt) {
+			mfc_err("failed to try output format\n");
+			return -EINVAL;
+		}
+
+		if (fmt->num_planes != pix_fmt_mp->num_planes) {
+			mfc_err("failed to try output format\n");
+			return -EINVAL;
+		}
+	} else {
+		mfc_err("invalid buf type\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	struct s5p_mfc_fmt *fmt;
+	struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
+	unsigned long flags;
+	int ret = 0;
+
+	ret = vidioc_try_fmt(file, priv, f);
+	if (ret)
+		return ret;
+	if (ctx->vq_src.streaming || ctx->vq_dst.streaming) {
+		v4l2_err(&dev->v4l2_dev, "%s queue busy\n", __func__);
+		ret = -EBUSY;
+		goto out;
+	}
+	if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		fmt = find_format(f, MFC_FMT_ENC);
+		if (!fmt) {
+			mfc_err("failed to set capture format\n");
+			return -EINVAL;
+		}
+		ctx->state = MFCINST_INIT;
+		ctx->dst_fmt = fmt;
+		ctx->codec_mode = ctx->dst_fmt->codec_mode;
+		ctx->enc_dst_buf_size =	pix_fmt_mp->plane_fmt[0].sizeimage;
+		pix_fmt_mp->plane_fmt[0].bytesperline = 0;
+		ctx->dst_bufs_cnt = 0;
+		ctx->capture_state = QUEUE_FREE;
+		s5p_mfc_alloc_instance_buffer(ctx);
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+		s5p_mfc_clean_ctx_int_flags(ctx);
+		s5p_mfc_try_run(dev);
+		if (s5p_mfc_wait_for_done_ctx(ctx, \
+				S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET, 1)) {
+				/* Error or timeout */
+			mfc_err("Error getting instance from hardware\n");
+			s5p_mfc_release_instance_buffer(ctx);
+			ret = -EIO;
+			goto out;
+		}
+		mfc_debug(2, "Got instance number: %d\n", ctx->inst_no);
+	} else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		fmt = find_format(f, MFC_FMT_RAW);
+		if (!fmt) {
+			mfc_err("failed to set output format\n");
+			return -EINVAL;
+		}
+		if (fmt->num_planes != pix_fmt_mp->num_planes) {
+			mfc_err("failed to set output format\n");
+			ret = -EINVAL;
+			goto out;
+		}
+		ctx->src_fmt = fmt;
+		ctx->img_width = pix_fmt_mp->width;
+		ctx->img_height = pix_fmt_mp->height;
+		mfc_debug(2, "codec number: %d\n", ctx->src_fmt->codec_mode);
+		mfc_debug(2, "fmt - w: %d, h: %d, ctx - w: %d, h: %d\n",
+			pix_fmt_mp->width, pix_fmt_mp->height,
+			ctx->img_width, ctx->img_height);
+		if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12M) {
+			ctx->buf_width = ALIGN(ctx->img_width,
+							S5P_FIMV_NV12M_HALIGN);
+			ctx->luma_size = ALIGN(ctx->img_width,
+				S5P_FIMV_NV12M_HALIGN) * ALIGN(ctx->img_height,
+				S5P_FIMV_NV12M_LVALIGN);
+			ctx->chroma_size = ALIGN(ctx->img_width,
+				S5P_FIMV_NV12M_HALIGN) * ALIGN((ctx->img_height
+				>> 1), S5P_FIMV_NV12M_CVALIGN);
+
+			ctx->luma_size = ALIGN(ctx->luma_size,
+							S5P_FIMV_NV12M_SALIGN);
+			ctx->chroma_size = ALIGN(ctx->chroma_size,
+							S5P_FIMV_NV12M_SALIGN);
+
+			pix_fmt_mp->plane_fmt[0].sizeimage = ctx->luma_size;
+			pix_fmt_mp->plane_fmt[0].bytesperline = ctx->buf_width;
+			pix_fmt_mp->plane_fmt[1].sizeimage = ctx->chroma_size;
+			pix_fmt_mp->plane_fmt[1].bytesperline = ctx->buf_width;
+
+		} else if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12MT) {
+			ctx->buf_width = ALIGN(ctx->img_width,
+							S5P_FIMV_NV12MT_HALIGN);
+			ctx->luma_size = ALIGN(ctx->img_width,
+				S5P_FIMV_NV12MT_HALIGN)	* ALIGN(ctx->img_height,
+				S5P_FIMV_NV12MT_VALIGN);
+			ctx->chroma_size = ALIGN(ctx->img_width,
+				S5P_FIMV_NV12MT_HALIGN) * ALIGN((ctx->img_height
+				>> 1), S5P_FIMV_NV12MT_VALIGN);
+			ctx->luma_size = ALIGN(ctx->luma_size,
+							S5P_FIMV_NV12MT_SALIGN);
+			ctx->chroma_size = ALIGN(ctx->chroma_size,
+							S5P_FIMV_NV12MT_SALIGN);
+
+			pix_fmt_mp->plane_fmt[0].sizeimage = ctx->luma_size;
+			pix_fmt_mp->plane_fmt[0].bytesperline = ctx->buf_width;
+			pix_fmt_mp->plane_fmt[1].sizeimage = ctx->chroma_size;
+			pix_fmt_mp->plane_fmt[1].bytesperline = ctx->buf_width;
+		}
+		ctx->src_bufs_cnt = 0;
+		ctx->output_state = QUEUE_FREE;
+	} else {
+		mfc_err("invalid buf type\n");
+		return -EINVAL;
+	}
+out:
+	mfc_debug_leave();
+	return ret;
+}
+
+static int vidioc_reqbufs(struct file *file, void *priv,
+					  struct v4l2_requestbuffers *reqbufs)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	int ret = 0;
+
+	/* if memory is not mmp or userptr return error */
+	if ((reqbufs->memory != V4L2_MEMORY_MMAP) &&
+		(reqbufs->memory != V4L2_MEMORY_USERPTR))
+		return -EINVAL;
+	if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		if (ctx->capture_state != QUEUE_FREE) {
+			mfc_err("invalid capture state: %d\n",
+							ctx->capture_state);
+			return -EINVAL;
+		}
+		ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+		if (ret != 0) {
+			mfc_err("error in vb2_reqbufs() for E(D)\n");
+			return ret;
+		}
+		ctx->capture_state = QUEUE_BUFS_REQUESTED;
+		ret = s5p_mfc_alloc_codec_buffers(ctx);
+		if (ret) {
+			mfc_err("Failed to allocate encoding buffers\n");
+			reqbufs->count = 0;
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			return -ENOMEM;
+		}
+	} else if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		if (ctx->output_state != QUEUE_FREE) {
+			mfc_err("invalid output state: %d\n",
+							ctx->output_state);
+			return -EINVAL;
+		}
+		ret = vb2_reqbufs(&ctx->vq_src, reqbufs);
+		if (ret != 0) {
+			mfc_err("error in vb2_reqbufs() for E(S)\n");
+			return ret;
+		}
+		ctx->output_state = QUEUE_BUFS_REQUESTED;
+	} else {
+		mfc_err("invalid buf type\n");
+		return -EINVAL;
+	}
+	return ret;
+}
+
+static int vidioc_querybuf(struct file *file, void *priv,
+						   struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	int ret = 0;
+
+	/* if memory is not mmp or userptr return error */
+	if ((buf->memory != V4L2_MEMORY_MMAP) &&
+		(buf->memory != V4L2_MEMORY_USERPTR))
+		return -EINVAL;
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		if (ctx->state != MFCINST_GOT_INST) {
+			mfc_err("invalid context state: %d\n", ctx->state);
+			return -EINVAL;
+		}
+		ret = vb2_querybuf(&ctx->vq_dst, buf);
+		if (ret != 0) {
+			mfc_err("error in vb2_querybuf() for E(D)\n");
+			return ret;
+		}
+		buf->m.planes[0].m.mem_offset += DST_QUEUE_OFF_BASE;
+	} else if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		ret = vb2_querybuf(&ctx->vq_src, buf);
+		if (ret != 0) {
+			mfc_err("error in vb2_querybuf() for E(S)\n");
+			return ret;
+		}
+	} else {
+		mfc_err("invalid buf type\n");
+		return -EINVAL;
+	}
+	return ret;
+}
+
+/* Queue a buffer */
+static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (ctx->state == MFCINST_ERROR) {
+		mfc_err("Call on QBUF after unrecoverable error\n");
+		return -EIO;
+	}
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_qbuf(&ctx->vq_src, buf);
+	else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_qbuf(&ctx->vq_dst, buf);
+	return -EINVAL;
+}
+
+/* Dequeue a buffer */
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (ctx->state == MFCINST_ERROR) {
+		mfc_err("Call on DQBUF after unrecoverable error\n");
+		return -EIO;
+	}
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_dqbuf(&ctx->vq_src, buf, file->f_flags & O_NONBLOCK);
+	else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_dqbuf(&ctx->vq_dst, buf, file->f_flags & O_NONBLOCK);
+	return -EINVAL;
+}
+
+/* Stream on */
+static int vidioc_streamon(struct file *file, void *priv,
+			   enum v4l2_buf_type type)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_streamon(&ctx->vq_src, type);
+	else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_streamon(&ctx->vq_dst, type);
+	return -EINVAL;
+}
+
+/* Stream off, which equals to a pause */
+static int vidioc_streamoff(struct file *file, void *priv,
+			    enum v4l2_buf_type type)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_streamoff(&ctx->vq_src, type);
+	else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_streamoff(&ctx->vq_dst, type);
+	return -EINVAL;
+}
+
+static inline int h264_level(enum v4l2_mpeg_video_h264_level lvl)
+{
+	static unsigned int t[V4L2_MPEG_VIDEO_H264_LEVEL_4_0 + 1] = {
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_1_0   */ 10,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_1B    */ 9,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_1_1   */ 11,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_1_2   */ 12,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_1_3   */ 13,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_2_0   */ 20,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_2_1   */ 21,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_2_2   */ 22,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_3_0   */ 30,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_3_1   */ 31,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_3_2   */ 32,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_4_0   */ 40,
+	};
+	return t[lvl];
+}
+
+static inline int mpeg4_level(enum v4l2_mpeg_video_mpeg4_level lvl)
+{
+	static unsigned int t[V4L2_MPEG_VIDEO_MPEG4_LEVEL_5 + 1] = {
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_0    */ 0,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B   */ 9,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_1    */ 1,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_2    */ 2,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_3    */ 3,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B   */ 7,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_4    */ 4,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_5    */ 5,
+	};
+	return t[lvl];
+}
+
+static inline int vui_sar_idc(enum v4l2_mpeg_video_h264_vui_sar_idc sar)
+{
+	static unsigned int t[V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED + 1] = {
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED     */ 0,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1             */ 1,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11           */ 2,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11           */ 3,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11           */ 4,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33           */ 5,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11           */ 6,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11           */ 7,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11           */ 8,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33           */ 9,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11           */ 10,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11           */ 11,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33           */ 12,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99          */ 13,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3             */ 14,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2             */ 15,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1             */ 16,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED        */ 255,
+	};
+	return t[sar];
+}
+
+static int s5p_mfc_enc_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct s5p_mfc_ctx *ctx = ctrl_to_ctx(ctrl);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	int ret = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
+		p->gop_size = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE:
+		p->slice_mode = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB:
+		p->slice_mb = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES:
+		p->slice_bit = ctrl->val * 8;
+		break;
+	case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB:
+		p->intra_refresh_mb = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_PADDING:
+		p->pad = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV:
+		p->pad_luma = (ctrl->val >> 16) & 0xff;
+		p->pad_cb = (ctrl->val >> 8) & 0xff;
+		p->pad_cr = (ctrl->val >> 0) & 0xff;
+		break;
+	case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:
+		p->rc_frame = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_BITRATE:
+		p->rc_bitrate = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF:
+		p->rc_reaction_coeff = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE:
+		ctx->force_frame_type = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_VBV_SIZE:
+		p->vbv_size = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE:
+		p->codec.h264.cpb_size = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:
+		p->seq_hdr_mode = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE:
+		p->frame_skip_mode = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT:
+		p->fixed_target_bit = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_B_FRAMES:
+		p->num_b_frame = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
+		switch (ctrl->val) {
+		case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN:
+			p->codec.h264.profile =
+					S5P_FIMV_ENC_PROFILE_H264_MAIN;
+			break;
+		case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH:
+			p->codec.h264.profile =
+					S5P_FIMV_ENC_PROFILE_H264_HIGH;
+			break;
+		case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE:
+			p->codec.h264.profile =
+				S5P_FIMV_ENC_PROFILE_H264_BASELINE;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
+		p->codec.h264.level_v4l2 = ctrl->val;
+		p->codec.h264.level = h264_level(ctrl->val);
+		if (p->codec.h264.level < 0) {
+			mfc_err("Level number is wrong\n");
+			ret = p->codec.h264.level;
+		}
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:
+		p->codec.mpeg4.level_v4l2 = ctrl->val;
+		p->codec.mpeg4.level = mpeg4_level(ctrl->val);
+		if (p->codec.mpeg4.level < 0) {
+			mfc_err("Level number is wrong\n");
+			ret = p->codec.mpeg4.level;
+		}
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE:
+		p->codec.h264.loop_filter_mode = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA:
+		p->codec.h264.loop_filter_alpha = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA:
+		p->codec.h264.loop_filter_beta = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE:
+		p->codec.h264.entropy_mode = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P:
+		p->codec.h264.num_ref_pic_4p = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM:
+		p->codec.h264._8x8_transform = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:
+		p->codec.h264.rc_mb = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP:
+		p->codec.h264.rc_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_MIN_QP:
+		p->codec.h264.rc_min_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_MAX_QP:
+		p->codec.h264.rc_max_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP:
+		p->codec.h264.rc_p_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP:
+		p->codec.h264.rc_b_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP:
+	case V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP:
+		p->codec.mpeg4.rc_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP:
+	case V4L2_CID_MPEG_VIDEO_H263_MIN_QP:
+		p->codec.mpeg4.rc_min_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP:
+	case V4L2_CID_MPEG_VIDEO_H263_MAX_QP:
+		p->codec.mpeg4.rc_max_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP:
+	case V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP:
+		p->codec.mpeg4.rc_p_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP:
+	case V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP:
+		p->codec.mpeg4.rc_b_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK:
+		p->codec.h264.rc_mb_dark = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH:
+		p->codec.h264.rc_mb_smooth = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC:
+		p->codec.h264.rc_mb_static = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY:
+		p->codec.h264.rc_mb_activity = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE:
+		p->codec.h264.vui_sar = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC:
+		p->codec.h264.vui_sar_idc = vui_sar_idc(ctrl->val);
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH:
+		p->codec.h264.vui_ext_sar_width = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT:
+		p->codec.h264.vui_ext_sar_height = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
+		p->codec.h264.open_gop = !ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_I_PERIOD:
+		p->codec.h264.open_gop_size = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:
+		switch (ctrl->val) {
+		case V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE:
+			p->codec.mpeg4.profile =
+				S5P_FIMV_ENC_PROFILE_MPEG4_SIMPLE;
+			break;
+		case V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE:
+			p->codec.mpeg4.profile =
+			S5P_FIMV_ENC_PROFILE_MPEG4_ADVANCED_SIMPLE;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_QPEL:
+		p->codec.mpeg4.quarter_pixel = ctrl->val;
+		break;
+	default:
+		v4l2_err(&dev->v4l2_dev, "Invalid control, id=%d, val=%d\n",
+							ctrl->id, ctrl->val);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops s5p_mfc_enc_ctrl_ops = {
+	.s_ctrl = s5p_mfc_enc_s_ctrl,
+};
+
+int vidioc_s_parm(struct file *file, void *priv, struct v4l2_streamparm *a)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (a->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		ctx->enc_params.rc_framerate_num =
+					a->parm.output.timeperframe.denominator;
+		ctx->enc_params.rc_framerate_denom =
+					a->parm.output.timeperframe.numerator;
+	} else {
+		mfc_err("Setting FPS is only possible for the output queue\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int vidioc_g_parm(struct file *file, void *priv, struct v4l2_streamparm *a)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (a->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		a->parm.output.timeperframe.denominator =
+					ctx->enc_params.rc_framerate_num;
+		a->parm.output.timeperframe.numerator =
+					ctx->enc_params.rc_framerate_denom;
+	} else {
+		mfc_err("Setting FPS is only possible for the output queue\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops s5p_mfc_enc_ioctl_ops = {
+	.vidioc_querycap = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap_mplane = vidioc_enum_fmt_vid_cap_mplane,
+	.vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out,
+	.vidioc_enum_fmt_vid_out_mplane = vidioc_enum_fmt_vid_out_mplane,
+	.vidioc_g_fmt_vid_cap_mplane = vidioc_g_fmt,
+	.vidioc_g_fmt_vid_out_mplane = vidioc_g_fmt,
+	.vidioc_try_fmt_vid_cap_mplane = vidioc_try_fmt,
+	.vidioc_try_fmt_vid_out_mplane = vidioc_try_fmt,
+	.vidioc_s_fmt_vid_cap_mplane = vidioc_s_fmt,
+	.vidioc_s_fmt_vid_out_mplane = vidioc_s_fmt,
+	.vidioc_reqbufs = vidioc_reqbufs,
+	.vidioc_querybuf = vidioc_querybuf,
+	.vidioc_qbuf = vidioc_qbuf,
+	.vidioc_dqbuf = vidioc_dqbuf,
+	.vidioc_streamon = vidioc_streamon,
+	.vidioc_streamoff = vidioc_streamoff,
+	.vidioc_s_parm = vidioc_s_parm,
+	.vidioc_g_parm = vidioc_g_parm,
+};
+
+static int check_vb_with_fmt(struct s5p_mfc_fmt *fmt, struct vb2_buffer *vb)
+{
+	int i;
+
+	if (!fmt)
+		return -EINVAL;
+	if (fmt->num_planes != vb->num_planes) {
+		mfc_err("invalid plane number for the format\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < fmt->num_planes; i++) {
+		if (!vb2_dma_contig_plane_paddr(vb, i)) {
+			mfc_err("failed to get plane cookie\n");
+			return -EINVAL;
+		}
+		mfc_debug(2, "index: %d, plane[%d] cookie: 0x%08zx",
+				vb->v4l2_buf.index, i,
+				vb2_dma_contig_plane_paddr(vb, i));
+	}
+	return 0;
+}
+
+static int s5p_mfc_queue_setup(struct vb2_queue *vq,
+		       unsigned int *buf_count, unsigned int *plane_count,
+		       unsigned long psize[], void *allocators[])
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+
+	if (ctx->state != MFCINST_GOT_INST) {
+		mfc_err("inavlid state: %d\n", ctx->state);
+		return -EINVAL;
+	}
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		if (ctx->dst_fmt)
+			*plane_count = ctx->dst_fmt->num_planes;
+		else
+			*plane_count = MFC_ENC_CAP_PLANE_COUNT;
+		if (*buf_count < 1)
+			*buf_count = 1;
+		if (*buf_count > MFC_MAX_BUFFERS)
+			*buf_count = MFC_MAX_BUFFERS;
+		psize[0] = ctx->enc_dst_buf_size;
+		allocators[0] = ctx->dev->alloc_ctx[MFC_BANK1_ALLOC_CTX];
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		if (ctx->src_fmt)
+			*plane_count = ctx->src_fmt->num_planes;
+		else
+			*plane_count = MFC_ENC_OUT_PLANE_COUNT;
+
+		if (*buf_count < 1)
+			*buf_count = 1;
+		if (*buf_count > MFC_MAX_BUFFERS)
+			*buf_count = MFC_MAX_BUFFERS;
+		psize[0] = ctx->luma_size;
+		psize[1] = ctx->chroma_size;
+		allocators[0] = ctx->dev->alloc_ctx[MFC_BANK2_ALLOC_CTX];
+		allocators[1] = ctx->dev->alloc_ctx[MFC_BANK2_ALLOC_CTX];
+	} else {
+		mfc_err("inavlid queue type: %d\n", vq->type);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void s5p_mfc_unlock(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mutex_unlock(&dev->mfc_mutex);
+}
+
+static void s5p_mfc_lock(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mutex_lock(&dev->mfc_mutex);
+}
+
+static int s5p_mfc_buf_init(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+	unsigned int i;
+	int ret;
+
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		ret = check_vb_with_fmt(ctx->dst_fmt, vb);
+		if (ret < 0)
+			return ret;
+		i = vb->v4l2_buf.index;
+		ctx->dst_bufs[i].b = vb;
+		ctx->dst_bufs[i].cookie.stream =
+					vb2_dma_contig_plane_paddr(vb, 0);
+		ctx->dst_bufs_cnt++;
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		ret = check_vb_with_fmt(ctx->src_fmt, vb);
+		if (ret < 0)
+			return ret;
+		i = vb->v4l2_buf.index;
+		ctx->src_bufs[i].b = vb;
+		ctx->src_bufs[i].cookie.raw.luma =
+					vb2_dma_contig_plane_paddr(vb, 0);
+		ctx->src_bufs[i].cookie.raw.chroma =
+					vb2_dma_contig_plane_paddr(vb, 1);
+		ctx->src_bufs_cnt++;
+	} else {
+		mfc_err("inavlid queue type: %d\n", vq->type);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int s5p_mfc_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+	int ret;
+
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		ret = check_vb_with_fmt(ctx->dst_fmt, vb);
+		if (ret < 0)
+			return ret;
+		mfc_debug(2, "plane size: %ld, dst size: %d\n",
+			vb2_plane_size(vb, 0), ctx->enc_dst_buf_size);
+		if (vb2_plane_size(vb, 0) < ctx->enc_dst_buf_size) {
+			mfc_err("plane size is too small for capture\n");
+			return -EINVAL;
+		}
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		ret = check_vb_with_fmt(ctx->src_fmt, vb);
+		if (ret < 0)
+			return ret;
+		mfc_debug(2, "plane size: %ld, luma size: %d\n",
+			vb2_plane_size(vb, 0), ctx->luma_size);
+		mfc_debug(2, "plane size: %ld, chroma size: %d\n",
+			vb2_plane_size(vb, 1), ctx->chroma_size);
+		if (vb2_plane_size(vb, 0) < ctx->luma_size ||
+		    vb2_plane_size(vb, 1) < ctx->chroma_size) {
+			mfc_err("plane size is too small for output\n");
+			return -EINVAL;
+		}
+	} else {
+		mfc_err("inavlid queue type: %d\n", vq->type);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int s5p_mfc_start_streaming(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+
+	v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
+	/* If context is ready then dev = work->data;schedule it to run */
+	if (s5p_mfc_ctx_ready(ctx)) {
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+	}
+	s5p_mfc_try_run(dev);
+	return 0;
+}
+
+static int s5p_mfc_stop_streaming(struct vb2_queue *q)
+{
+	unsigned long flags;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	if ((ctx->state == MFCINST_FINISHING ||
+		ctx->state == MFCINST_RUNNING) &&
+		dev->curr_ctx == ctx->num && dev->hw_lock) {
+		ctx->state = MFCINST_ABORT;
+		s5p_mfc_wait_for_done_ctx(ctx, S5P_FIMV_R2H_CMD_FRAME_DONE_RET,
+					  0);
+	}
+	ctx->state = MFCINST_FINISHED;
+	spin_lock_irqsave(&dev->irqlock, flags);
+	if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst);
+		INIT_LIST_HEAD(&ctx->dst_queue);
+		ctx->dst_queue_cnt = 0;
+	}
+	if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		cleanup_ref_queue(ctx);
+		s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src);
+		INIT_LIST_HEAD(&ctx->src_queue);
+		ctx->src_queue_cnt = 0;
+	}
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	return 0;
+}
+
+static void s5p_mfc_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *mfc_buf;
+
+	if (ctx->state == MFCINST_ERROR) {
+		vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+		cleanup_ref_queue(ctx);
+		return;
+	}
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		mfc_buf = &ctx->dst_bufs[vb->v4l2_buf.index];
+		mfc_buf->used = 0;
+		/* Mark destination as available for use by MFC */
+		spin_lock_irqsave(&dev->irqlock, flags);
+		list_add_tail(&mfc_buf->list, &ctx->dst_queue);
+		ctx->dst_queue_cnt++;
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		mfc_buf = &ctx->src_bufs[vb->v4l2_buf.index];
+		mfc_buf->used = 0;
+		spin_lock_irqsave(&dev->irqlock, flags);
+		if (vb->v4l2_planes[0].bytesused == 0) {
+			mfc_debug(1, "change state to FINISHING\n");
+			ctx->state = MFCINST_FINISHING;
+			vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
+			cleanup_ref_queue(ctx);
+		} else {
+			list_add_tail(&mfc_buf->list, &ctx->src_queue);
+			ctx->src_queue_cnt++;
+		}
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+	} else {
+		mfc_err("unsupported buffer type (%d)\n", vq->type);
+	}
+	if (s5p_mfc_ctx_ready(ctx)) {
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+	}
+	s5p_mfc_try_run(dev);
+}
+
+static struct vb2_ops s5p_mfc_enc_qops = {
+	.queue_setup		= s5p_mfc_queue_setup,
+	.wait_prepare		= s5p_mfc_unlock,
+	.wait_finish		= s5p_mfc_lock,
+	.buf_init		= s5p_mfc_buf_init,
+	.buf_prepare		= s5p_mfc_buf_prepare,
+	.start_streaming	= s5p_mfc_start_streaming,
+	.stop_streaming		= s5p_mfc_stop_streaming,
+	.buf_queue		= s5p_mfc_buf_queue,
+};
+
+struct s5p_mfc_codec_ops *get_enc_codec_ops(void)
+{
+	return &encoder_codec_ops;
+}
+
+struct vb2_ops *get_enc_queue_ops(void)
+{
+	return &s5p_mfc_enc_qops;
+}
+
+const struct v4l2_ioctl_ops *get_enc_v4l2_ioctl_ops(void)
+{
+	return &s5p_mfc_enc_ioctl_ops;
+}
+
+#define IS_MFC51_PRIV(x) ((V4L2_CTRL_ID2CLASS(x) == V4L2_CTRL_CLASS_MPEG) \
+						&& V4L2_CTRL_DRIVER_PRIV(x))
+
+int s5p_mfc_enc_ctrls_setup(struct s5p_mfc_ctx *ctx)
+{
+	struct v4l2_ctrl_config cfg;
+	int i;
+
+	v4l2_ctrl_handler_init(&ctx->ctrl_handler, NUM_CTRLS);
+	if (ctx->ctrl_handler.error) {
+		mfc_err("v4l2_ctrl_handler_init failed\n");
+		return ctx->ctrl_handler.error;
+	}
+	for (i = 0; i < NUM_CTRLS; i++) {
+		if (IS_MFC51_PRIV(controls[i].id)) {
+			cfg.ops = &s5p_mfc_enc_ctrl_ops;
+			cfg.id = controls[i].id;
+			cfg.min = controls[i].minimum;
+			cfg.max = controls[i].maximum;
+			cfg.def = controls[i].default_value;
+			cfg.name = controls[i].name;
+			cfg.type = controls[i].type;
+			cfg.flags = 0;
+
+			if (cfg.type == V4L2_CTRL_TYPE_MENU) {
+				cfg.step = 0;
+				cfg.menu_skip_mask = cfg.menu_skip_mask;
+				cfg.qmenu = mfc51_get_menu(cfg.id);
+			} else {
+				cfg.step = controls[i].step;
+				cfg.menu_skip_mask = 0;
+			}
+			ctx->ctrls[i] = v4l2_ctrl_new_custom(&ctx->ctrl_handler,
+					&cfg, NULL);
+		} else {
+			if (controls[i].type == V4L2_CTRL_TYPE_MENU) {
+				ctx->ctrls[i] = v4l2_ctrl_new_std_menu(
+					&ctx->ctrl_handler,
+					&s5p_mfc_enc_ctrl_ops, controls[i].id,
+					controls[i].maximum, 0,
+					controls[i].default_value);
+			} else {
+				ctx->ctrls[i] = v4l2_ctrl_new_std(
+					&ctx->ctrl_handler,
+					&s5p_mfc_enc_ctrl_ops, controls[i].id,
+					controls[i].minimum,
+					controls[i].maximum, controls[i].step,
+					controls[i].default_value);
+			}
+		}
+		if (ctx->ctrl_handler.error) {
+			mfc_err("Adding control (%d) failed\n", i);
+			return ctx->ctrl_handler.error;
+		}
+		if (controls[i].is_volatile && ctx->ctrls[i])
+			ctx->ctrls[i]->is_volatile = 1;
+	}
+	return 0;
+}
+
+void s5p_mfc_enc_ctrls_delete(struct s5p_mfc_ctx *ctx)
+{
+	int i;
+
+	v4l2_ctrl_handler_free(&ctx->ctrl_handler);
+	for (i = 0; i < NUM_CTRLS; i++)
+		ctx->ctrls[i] = NULL;
+}
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.h b/drivers/media/video/s5p-mfc/s5p_mfc_enc.h
new file mode 100644
index 0000000..405bdd3
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.h
@@ -0,0 +1,23 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_enc.h
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_ENC_H_
+#define S5P_MFC_ENC_H_
+
+struct s5p_mfc_codec_ops *get_enc_codec_ops(void);
+struct vb2_ops *get_enc_queue_ops(void);
+const struct v4l2_ioctl_ops *get_enc_v4l2_ioctl_ops(void);
+struct s5p_mfc_fmt *get_enc_def_fmt(bool src);
+int s5p_mfc_enc_ctrls_setup(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_enc_ctrls_delete(struct s5p_mfc_ctx *ctx);
+
+#endif /* S5P_MFC_ENC_H_  */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_intr.c b/drivers/media/video/s5p-mfc/s5p_mfc_intr.c
new file mode 100644
index 0000000..8f2f8bf
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_intr.c
@@ -0,0 +1,92 @@
+/*
+ * drivers/media/video/samsung/mfc5/s5p_mfc_intr.c
+ *
+ * C file for Samsung MFC (Multi Function Codec - FIMV) driver
+ * This file contains functions used to wait for command completion.
+ *
+ * Kamil Debski, Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include "regs-mfc.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_intr.h"
+
+int s5p_mfc_wait_for_done_dev(struct s5p_mfc_dev *dev, int command)
+{
+	int ret;
+
+	ret = wait_event_interruptible_timeout(dev->queue,
+		(dev->int_cond && (dev->int_type == command
+		|| dev->int_type == S5P_FIMV_R2H_CMD_ERR_RET)),
+		msecs_to_jiffies(MFC_INT_TIMEOUT));
+	if (ret == 0) {
+		mfc_err("Interrupt (dev->int_type:%d, command:%d) timed out\n",
+							dev->int_type, command);
+		return 1;
+	} else if (ret == -ERESTARTSYS) {
+		mfc_err("Interrupted by a signal\n");
+		return 1;
+	}
+	mfc_debug(1, "Finished waiting (dev->int_type:%d, command: %d)\n",
+							dev->int_type, command);
+	if (dev->int_type == S5P_FIMV_R2H_CMD_ERR_RET)
+		return 1;
+	return 0;
+}
+
+void s5p_mfc_clean_dev_int_flags(struct s5p_mfc_dev *dev)
+{
+	dev->int_cond = 0;
+	dev->int_type = 0;
+	dev->int_err = 0;
+}
+
+int s5p_mfc_wait_for_done_ctx(struct s5p_mfc_ctx *ctx,
+				    int command, int interrupt)
+{
+	int ret;
+
+	if (interrupt) {
+		ret = wait_event_interruptible_timeout(ctx->queue,
+				(ctx->int_cond && (ctx->int_type == command
+			|| ctx->int_type == S5P_FIMV_R2H_CMD_ERR_RET)),
+					msecs_to_jiffies(MFC_INT_TIMEOUT));
+	} else {
+		ret = wait_event_timeout(ctx->queue,
+				(ctx->int_cond && (ctx->int_type == command
+			|| ctx->int_type == S5P_FIMV_R2H_CMD_ERR_RET)),
+					msecs_to_jiffies(MFC_INT_TIMEOUT));
+	}
+	if (ret == 0) {
+		mfc_err("Interrupt (ctx->int_type:%d, command:%d) timed out\n",
+							ctx->int_type, command);
+		return 1;
+	} else if (ret == -ERESTARTSYS) {
+		mfc_err("Interrupted by a signal\n");
+		return 1;
+	}
+	mfc_debug(1, "Finished waiting (ctx->int_type:%d, command: %d)\n",
+							ctx->int_type, command);
+	if (ctx->int_type == S5P_FIMV_R2H_CMD_ERR_RET)
+		return 1;
+	return 0;
+}
+
+void s5p_mfc_clean_ctx_int_flags(struct s5p_mfc_ctx *ctx)
+{
+	ctx->int_cond = 0;
+	ctx->int_type = 0;
+	ctx->int_err = 0;
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_intr.h b/drivers/media/video/s5p-mfc/s5p_mfc_intr.h
new file mode 100644
index 0000000..122d773
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_intr.h
@@ -0,0 +1,26 @@
+/*
+ * drivers/media/video/samsung/mfc5/s5p_mfc_intr.h
+ *
+ * Header file for Samsung MFC (Multi Function Codec - FIMV) driver
+ * It contains waiting functions declarations.
+ *
+ * Kamil Debski, Copyright (C) 2011 Samsung Electronics
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef S5P_MFC_INTR_H_
+#define S5P_MFC_INTR_H_
+
+#include "s5p_mfc_common.h"
+
+int s5p_mfc_wait_for_done_ctx(struct s5p_mfc_ctx *ctx,
+			      int command, int interrupt);
+int s5p_mfc_wait_for_done_dev(struct s5p_mfc_dev *dev, int command);
+void s5p_mfc_clean_ctx_int_flags(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_clean_dev_int_flags(struct s5p_mfc_dev *dev);
+
+#endif /* S5P_MFC_INTR_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.c b/drivers/media/video/s5p-mfc/s5p_mfc_opr.c
new file mode 100644
index 0000000..7b23916
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_opr.c
@@ -0,0 +1,1397 @@
+/*
+ * drivers/media/video/samsung/mfc5/s5p_mfc_opr.c
+ *
+ * Samsung MFC (Multi Function Codec - FIMV) driver
+ * This file contains hw related functions.
+ *
+ * Kamil Debski, Copyright (c) 2011 Samsung Electronics
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "regs-mfc.h"
+#include "s5p_mfc_cmd.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_ctrl.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_intr.h"
+#include "s5p_mfc_opr.h"
+#include "s5p_mfc_pm.h"
+#include "s5p_mfc_shm.h"
+#include <asm/cacheflush.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+#define OFFSETA(x)		(((x) - dev->bank1) >> MFC_OFFSET_SHIFT)
+#define OFFSETB(x)		(((x) - dev->bank2) >> MFC_OFFSET_SHIFT)
+
+/* Allocate temporary buffers for decoding */
+int s5p_mfc_alloc_dec_temp_buffers(struct s5p_mfc_ctx *ctx)
+{
+	void *desc_virt;
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	ctx->desc_buf = vb2_dma_contig_memops.alloc(
+			dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], DESC_BUF_SIZE);
+	if (IS_ERR_VALUE((int)ctx->desc_buf)) {
+		ctx->desc_buf = 0;
+		mfc_err("Allocating DESC buffer failed\n");
+		return -ENOMEM;
+	}
+	ctx->desc_phys = s5p_mfc_mem_cookie(
+			dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->desc_buf);
+	BUG_ON(ctx->desc_phys & ((1 << MFC_BANK1_ALIGN_ORDER) - 1));
+	desc_virt = vb2_dma_contig_memops.vaddr(ctx->desc_buf);
+	if (desc_virt == NULL) {
+		vb2_dma_contig_memops.put(ctx->desc_buf);
+		ctx->desc_phys = 0;
+		ctx->desc_buf = 0;
+		mfc_err("Remapping DESC buffer failed\n");
+		return -ENOMEM;
+	}
+	memset(desc_virt, 0, DESC_BUF_SIZE);
+	wmb();
+	return 0;
+}
+
+/* Release temporary buffers for decoding */
+void s5p_mfc_release_dec_desc_buffer(struct s5p_mfc_ctx *ctx)
+{
+	if (ctx->desc_phys) {
+		vb2_dma_contig_memops.put(ctx->desc_buf);
+		ctx->desc_phys = 0;
+		ctx->desc_buf = 0;
+	}
+}
+
+/* Allocate codec buffers */
+int s5p_mfc_alloc_codec_buffers(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned int enc_ref_y_size = 0;
+	unsigned int enc_ref_c_size = 0;
+	unsigned int guard_width, guard_height;
+
+	if (ctx->type == MFCINST_DECODER) {
+		mfc_debug(2, "Luma size:%d Chroma size:%d MV size:%d\n",
+			  ctx->luma_size, ctx->chroma_size, ctx->mv_size);
+		mfc_debug(2, "Totals bufs: %d\n", ctx->total_dpb_count);
+	} else if (ctx->type == MFCINST_ENCODER) {
+		enc_ref_y_size = ALIGN(ctx->img_width, S5P_FIMV_NV12MT_HALIGN)
+			* ALIGN(ctx->img_height, S5P_FIMV_NV12MT_VALIGN);
+		enc_ref_y_size = ALIGN(enc_ref_y_size, S5P_FIMV_NV12MT_SALIGN);
+
+		if (ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC) {
+			enc_ref_c_size = ALIGN(ctx->img_width,
+						S5P_FIMV_NV12MT_HALIGN)
+						* ALIGN(ctx->img_height >> 1,
+						S5P_FIMV_NV12MT_VALIGN);
+			enc_ref_c_size = ALIGN(enc_ref_c_size,
+							S5P_FIMV_NV12MT_SALIGN);
+		} else {
+			guard_width = ALIGN(ctx->img_width + 16,
+							S5P_FIMV_NV12MT_HALIGN);
+			guard_height = ALIGN((ctx->img_height >> 1) + 4,
+							S5P_FIMV_NV12MT_VALIGN);
+			enc_ref_c_size = ALIGN(guard_width * guard_height,
+					       S5P_FIMV_NV12MT_SALIGN);
+		}
+		mfc_debug(2, "recon luma size: %d chroma size: %d\n",
+			  enc_ref_y_size, enc_ref_c_size);
+	} else {
+		return -EINVAL;
+	}
+	/* Codecs have different memory requirements */
+	switch (ctx->codec_mode) {
+	case S5P_FIMV_CODEC_H264_DEC:
+		ctx->bank1_size =
+		    ALIGN(S5P_FIMV_DEC_NB_IP_SIZE +
+					S5P_FIMV_DEC_VERT_NB_MV_SIZE,
+					S5P_FIMV_DEC_BUF_ALIGN);
+		ctx->bank2_size = ctx->total_dpb_count * ctx->mv_size;
+		break;
+	case S5P_FIMV_CODEC_MPEG4_DEC:
+		ctx->bank1_size =
+		    ALIGN(S5P_FIMV_DEC_NB_DCAC_SIZE +
+				     S5P_FIMV_DEC_UPNB_MV_SIZE +
+				     S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE +
+				     S5P_FIMV_DEC_STX_PARSER_SIZE +
+				     S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE,
+				     S5P_FIMV_DEC_BUF_ALIGN);
+		ctx->bank2_size = 0;
+		break;
+	case S5P_FIMV_CODEC_VC1RCV_DEC:
+	case S5P_FIMV_CODEC_VC1_DEC:
+		ctx->bank1_size =
+		    ALIGN(S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE +
+			     S5P_FIMV_DEC_UPNB_MV_SIZE +
+			     S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE +
+			     S5P_FIMV_DEC_NB_DCAC_SIZE +
+			     3 * S5P_FIMV_DEC_VC1_BITPLANE_SIZE,
+			     S5P_FIMV_DEC_BUF_ALIGN);
+		ctx->bank2_size = 0;
+		break;
+	case S5P_FIMV_CODEC_MPEG2_DEC:
+		ctx->bank1_size = 0;
+		ctx->bank2_size = 0;
+		break;
+	case S5P_FIMV_CODEC_H263_DEC:
+		ctx->bank1_size =
+		    ALIGN(S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE +
+			     S5P_FIMV_DEC_UPNB_MV_SIZE +
+			     S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE +
+			     S5P_FIMV_DEC_NB_DCAC_SIZE,
+			     S5P_FIMV_DEC_BUF_ALIGN);
+		ctx->bank2_size = 0;
+		break;
+	case S5P_FIMV_CODEC_H264_ENC:
+		ctx->bank1_size = (enc_ref_y_size * 2) +
+				   S5P_FIMV_ENC_UPMV_SIZE +
+				   S5P_FIMV_ENC_COLFLG_SIZE +
+				   S5P_FIMV_ENC_INTRAMD_SIZE +
+				   S5P_FIMV_ENC_NBORINFO_SIZE;
+		ctx->bank2_size = (enc_ref_y_size * 2) +
+				   (enc_ref_c_size * 4) +
+				   S5P_FIMV_ENC_INTRAPRED_SIZE;
+		break;
+	case S5P_FIMV_CODEC_MPEG4_ENC:
+		ctx->bank1_size = (enc_ref_y_size * 2) +
+				   S5P_FIMV_ENC_UPMV_SIZE +
+				   S5P_FIMV_ENC_COLFLG_SIZE +
+				   S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		ctx->bank2_size = (enc_ref_y_size * 2) +
+				   (enc_ref_c_size * 4);
+		break;
+	case S5P_FIMV_CODEC_H263_ENC:
+		ctx->bank1_size = (enc_ref_y_size * 2) +
+				   S5P_FIMV_ENC_UPMV_SIZE +
+				   S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		ctx->bank2_size = (enc_ref_y_size * 2) +
+				   (enc_ref_c_size * 4);
+		break;
+	default:
+		break;
+	}
+	/* Allocate only if memory from bank 1 is necessary */
+	if (ctx->bank1_size > 0) {
+		ctx->bank1_buf = vb2_dma_contig_memops.alloc(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->bank1_size);
+		if (IS_ERR(ctx->bank1_buf)) {
+			ctx->bank1_buf = 0;
+			printk(KERN_ERR
+			       "Buf alloc for decoding failed (port A)\n");
+			return -ENOMEM;
+		}
+		ctx->bank1_phys = s5p_mfc_mem_cookie(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->bank1_buf);
+		BUG_ON(ctx->bank1_phys & ((1 << MFC_BANK1_ALIGN_ORDER) - 1));
+	}
+	/* Allocate only if memory from bank 2 is necessary */
+	if (ctx->bank2_size > 0) {
+		ctx->bank2_buf = vb2_dma_contig_memops.alloc(
+		dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], ctx->bank2_size);
+		if (IS_ERR(ctx->bank2_buf)) {
+			ctx->bank2_buf = 0;
+			mfc_err("Buf alloc for decoding failed (port B)\n");
+			return -ENOMEM;
+		}
+		ctx->bank2_phys = s5p_mfc_mem_cookie(
+		dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], ctx->bank2_buf);
+		BUG_ON(ctx->bank2_phys & ((1 << MFC_BANK2_ALIGN_ORDER) - 1));
+	}
+	return 0;
+}
+
+/* Release buffers allocated for codec */
+void s5p_mfc_release_codec_buffers(struct s5p_mfc_ctx *ctx)
+{
+	if (ctx->bank1_buf) {
+		vb2_dma_contig_memops.put(ctx->bank1_buf);
+		ctx->bank1_buf = 0;
+		ctx->bank1_phys = 0;
+		ctx->bank1_size = 0;
+	}
+	if (ctx->bank2_buf) {
+		vb2_dma_contig_memops.put(ctx->bank2_buf);
+		ctx->bank2_buf = 0;
+		ctx->bank2_phys = 0;
+		ctx->bank2_size = 0;
+	}
+}
+
+/* Allocate memory for instance data buffer */
+int s5p_mfc_alloc_instance_buffer(struct s5p_mfc_ctx *ctx)
+{
+	void *context_virt;
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC ||
+		ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC)
+		ctx->ctx_size = MFC_H264_CTX_BUF_SIZE;
+	else
+		ctx->ctx_size = MFC_CTX_BUF_SIZE;
+	ctx->ctx_buf = vb2_dma_contig_memops.alloc(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->ctx_size);
+	if (IS_ERR(ctx->ctx_buf)) {
+		mfc_err("Allocating context buffer failed\n");
+		ctx->ctx_phys = 0;
+		ctx->ctx_buf = 0;
+		return -ENOMEM;
+	}
+	ctx->ctx_phys = s5p_mfc_mem_cookie(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->ctx_buf);
+	BUG_ON(ctx->ctx_phys & ((1 << MFC_BANK1_ALIGN_ORDER) - 1));
+	ctx->ctx_ofs = OFFSETA(ctx->ctx_phys);
+	context_virt = vb2_dma_contig_memops.vaddr(ctx->ctx_buf);
+	if (context_virt == NULL) {
+		mfc_err("Remapping instance buffer failed\n");
+		vb2_dma_contig_memops.put(ctx->ctx_buf);
+		ctx->ctx_phys = 0;
+		ctx->ctx_buf = 0;
+		return -ENOMEM;
+	}
+	/* Zero content of the allocated memory */
+	memset(context_virt, 0, ctx->ctx_size);
+	wmb();
+	if (s5p_mfc_init_shm(ctx) < 0) {
+		vb2_dma_contig_memops.put(ctx->ctx_buf);
+		ctx->ctx_phys = 0;
+		ctx->ctx_buf = 0;
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+/* Release instance buffer */
+void s5p_mfc_release_instance_buffer(struct s5p_mfc_ctx *ctx)
+{
+	if (ctx->ctx_buf) {
+		vb2_dma_contig_memops.put(ctx->ctx_buf);
+		ctx->ctx_phys = 0;
+		ctx->ctx_buf = 0;
+	}
+	if (ctx->shm_alloc) {
+		vb2_dma_contig_memops.put(ctx->shm_alloc);
+		ctx->shm_alloc = 0;
+		ctx->shm = 0;
+	}
+}
+
+/* Set registers for decoding temporary buffers */
+void s5p_mfc_set_dec_desc_buffer(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mfc_write(dev, OFFSETA(ctx->desc_phys), S5P_FIMV_SI_CH0_DESC_ADR);
+	mfc_write(dev, DESC_BUF_SIZE, S5P_FIMV_SI_CH0_DESC_SIZE);
+}
+
+/* Set registers for shared buffer */
+void s5p_mfc_set_shared_buffer(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	mfc_write(dev, ctx->shm_ofs, S5P_FIMV_SI_CH0_HOST_WR_ADR);
+}
+
+/* Set registers for decoding stream buffer */
+int s5p_mfc_set_dec_stream_buffer(struct s5p_mfc_ctx *ctx, int buf_addr,
+		  unsigned int start_num_byte, unsigned int buf_size)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mfc_write(dev, OFFSETA(buf_addr), S5P_FIMV_SI_CH0_SB_ST_ADR);
+	mfc_write(dev, ctx->dec_src_buf_size, S5P_FIMV_SI_CH0_CPB_SIZE);
+	mfc_write(dev, buf_size, S5P_FIMV_SI_CH0_SB_FRM_SIZE);
+	s5p_mfc_write_shm(ctx, start_num_byte, START_BYTE_NUM);
+	return 0;
+}
+
+/* Set decoding frame buffer */
+int s5p_mfc_set_dec_frame_buffer(struct s5p_mfc_ctx *ctx)
+{
+	unsigned int frame_size, i;
+	unsigned int frame_size_ch, frame_size_mv;
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned int dpb;
+	size_t buf_addr1, buf_addr2;
+	int buf_size1, buf_size2;
+
+	buf_addr1 = ctx->bank1_phys;
+	buf_size1 = ctx->bank1_size;
+	buf_addr2 = ctx->bank2_phys;
+	buf_size2 = ctx->bank2_size;
+	dpb = mfc_read(dev, S5P_FIMV_SI_CH0_DPB_CONF_CTRL) &
+						~S5P_FIMV_DPB_COUNT_MASK;
+	mfc_write(dev, ctx->total_dpb_count | dpb,
+						S5P_FIMV_SI_CH0_DPB_CONF_CTRL);
+	s5p_mfc_set_shared_buffer(ctx);
+	switch (ctx->codec_mode) {
+	case S5P_FIMV_CODEC_H264_DEC:
+		mfc_write(dev, OFFSETA(buf_addr1),
+						S5P_FIMV_H264_VERT_NB_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_VERT_NB_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_VERT_NB_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H264_NB_IP_ADR);
+		buf_addr1 += S5P_FIMV_DEC_NB_IP_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_NB_IP_SIZE;
+		break;
+	case S5P_FIMV_CODEC_MPEG4_DEC:
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_NB_DCAC_ADR);
+		buf_addr1 += S5P_FIMV_DEC_NB_DCAC_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_NB_DCAC_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_UP_NB_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_UPNB_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_UPNB_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_SA_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_SP_ADR);
+		buf_addr1 += S5P_FIMV_DEC_STX_PARSER_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_STX_PARSER_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_OT_LINE_ADR);
+		buf_addr1 += S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		break;
+	case S5P_FIMV_CODEC_H263_DEC:
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_OT_LINE_ADR);
+		buf_addr1 += S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_UP_NB_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_UPNB_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_UPNB_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_SA_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_NB_DCAC_ADR);
+		buf_addr1 += S5P_FIMV_DEC_NB_DCAC_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_NB_DCAC_SIZE;
+		break;
+	case S5P_FIMV_CODEC_VC1_DEC:
+	case S5P_FIMV_CODEC_VC1RCV_DEC:
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_NB_DCAC_ADR);
+		buf_addr1 += S5P_FIMV_DEC_NB_DCAC_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_NB_DCAC_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_OT_LINE_ADR);
+		buf_addr1 += S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_UP_NB_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_UPNB_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_UPNB_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_SA_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_BITPLANE3_ADR);
+		buf_addr1 += S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_BITPLANE2_ADR);
+		buf_addr1 += S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_BITPLANE1_ADR);
+		buf_addr1 += S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		break;
+	case S5P_FIMV_CODEC_MPEG2_DEC:
+		break;
+	default:
+		mfc_err("Unknown codec for decoding (%x)\n",
+			ctx->codec_mode);
+		return -EINVAL;
+		break;
+	}
+	frame_size = ctx->luma_size;
+	frame_size_ch = ctx->chroma_size;
+	frame_size_mv = ctx->mv_size;
+	mfc_debug(2, "Frm size: %d ch: %d mv: %d\n", frame_size, frame_size_ch,
+								frame_size_mv);
+	for (i = 0; i < ctx->total_dpb_count; i++) {
+		/* Bank2 */
+		mfc_debug(2, "Luma %d: %x\n", i,
+					ctx->dst_bufs[i].cookie.raw.luma);
+		mfc_write(dev, OFFSETB(ctx->dst_bufs[i].cookie.raw.luma),
+						S5P_FIMV_DEC_LUMA_ADR + i * 4);
+		mfc_debug(2, "\tChroma %d: %x\n", i,
+					ctx->dst_bufs[i].cookie.raw.chroma);
+		mfc_write(dev, OFFSETA(ctx->dst_bufs[i].cookie.raw.chroma),
+					       S5P_FIMV_DEC_CHROMA_ADR + i * 4);
+		if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC) {
+			mfc_debug(2, "\tBuf2: %x, size: %d\n",
+							buf_addr2, buf_size2);
+			mfc_write(dev, OFFSETB(buf_addr2),
+						S5P_FIMV_H264_MV_ADR + i * 4);
+			buf_addr2 += frame_size_mv;
+			buf_size2 -= frame_size_mv;
+		}
+	}
+	mfc_debug(2, "Buf1: %u, buf_size1: %d\n", buf_addr1, buf_size1);
+	mfc_debug(2, "Buf 1/2 size after: %d/%d (frames %d)\n",
+			buf_size1,  buf_size2, ctx->total_dpb_count);
+	if (buf_size1 < 0 || buf_size2 < 0) {
+		mfc_debug(2, "Not enough memory has been allocated\n");
+		return -ENOMEM;
+	}
+	s5p_mfc_write_shm(ctx, frame_size, ALLOC_LUMA_DPB_SIZE);
+	s5p_mfc_write_shm(ctx, frame_size_ch, ALLOC_CHROMA_DPB_SIZE);
+	if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC)
+		s5p_mfc_write_shm(ctx, frame_size_mv, ALLOC_MV_SIZE);
+	mfc_write(dev, ((S5P_FIMV_CH_INIT_BUFS & S5P_FIMV_CH_MASK)
+					<< S5P_FIMV_CH_SHIFT) | (ctx->inst_no),
+						S5P_FIMV_SI_CH0_INST_ID);
+	return 0;
+}
+
+/* Set registers for encoding stream buffer */
+int s5p_mfc_set_enc_stream_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long addr, unsigned int size)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mfc_write(dev, OFFSETA(addr), S5P_FIMV_ENC_SI_CH0_SB_ADR);
+	mfc_write(dev, size, S5P_FIMV_ENC_SI_CH0_SB_SIZE);
+	return 0;
+}
+
+void s5p_mfc_set_enc_frame_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long y_addr, unsigned long c_addr)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mfc_write(dev, OFFSETB(y_addr), S5P_FIMV_ENC_SI_CH0_CUR_Y_ADR);
+	mfc_write(dev, OFFSETB(c_addr), S5P_FIMV_ENC_SI_CH0_CUR_C_ADR);
+}
+
+void s5p_mfc_get_enc_frame_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long *y_addr, unsigned long *c_addr)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	*y_addr = dev->bank2 + (mfc_read(dev, S5P_FIMV_ENCODED_Y_ADDR)
+							<< MFC_OFFSET_SHIFT);
+	*c_addr = dev->bank2 + (mfc_read(dev, S5P_FIMV_ENCODED_C_ADDR)
+							<< MFC_OFFSET_SHIFT);
+}
+
+/* Set encoding ref & codec buffer */
+int s5p_mfc_set_enc_ref_buffer(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	size_t buf_addr1, buf_addr2;
+	size_t buf_size1, buf_size2;
+	unsigned int enc_ref_y_size, enc_ref_c_size;
+	unsigned int guard_width, guard_height;
+	int i;
+
+	buf_addr1 = ctx->bank1_phys;
+	buf_size1 = ctx->bank1_size;
+	buf_addr2 = ctx->bank2_phys;
+	buf_size2 = ctx->bank2_size;
+	enc_ref_y_size = ALIGN(ctx->img_width, S5P_FIMV_NV12MT_HALIGN)
+		* ALIGN(ctx->img_height, S5P_FIMV_NV12MT_VALIGN);
+	enc_ref_y_size = ALIGN(enc_ref_y_size, S5P_FIMV_NV12MT_SALIGN);
+	if (ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC) {
+		enc_ref_c_size = ALIGN(ctx->img_width, S5P_FIMV_NV12MT_HALIGN)
+			* ALIGN((ctx->img_height >> 1), S5P_FIMV_NV12MT_VALIGN);
+		enc_ref_c_size = ALIGN(enc_ref_c_size, S5P_FIMV_NV12MT_SALIGN);
+	} else {
+		guard_width = ALIGN(ctx->img_width + 16,
+						S5P_FIMV_NV12MT_HALIGN);
+		guard_height = ALIGN((ctx->img_height >> 1) + 4,
+						S5P_FIMV_NV12MT_VALIGN);
+		enc_ref_c_size = ALIGN(guard_width * guard_height,
+				       S5P_FIMV_NV12MT_SALIGN);
+	}
+	mfc_debug(2, "buf_size1: %d, buf_size2: %d\n", buf_size1, buf_size2);
+	switch (ctx->codec_mode) {
+	case S5P_FIMV_CODEC_H264_ENC:
+		for (i = 0; i < 2; i++) {
+			mfc_write(dev, OFFSETA(buf_addr1),
+				S5P_FIMV_ENC_REF0_LUMA_ADR + (4 * i));
+			buf_addr1 += enc_ref_y_size;
+			buf_size1 -= enc_ref_y_size;
+
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF2_LUMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_y_size;
+			buf_size2 -= enc_ref_y_size;
+		}
+		for (i = 0; i < 4; i++) {
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF0_CHROMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_c_size;
+			buf_size2 -= enc_ref_c_size;
+		}
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H264_UP_MV_ADR);
+		buf_addr1 += S5P_FIMV_ENC_UPMV_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_UPMV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1),
+					S5P_FIMV_H264_COZERO_FLAG_ADR);
+		buf_addr1 += S5P_FIMV_ENC_COLFLG_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_COLFLG_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1),
+					S5P_FIMV_H264_UP_INTRA_MD_ADR);
+		buf_addr1 += S5P_FIMV_ENC_INTRAMD_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_INTRAMD_SIZE;
+		mfc_write(dev, OFFSETB(buf_addr2),
+					S5P_FIMV_H264_UP_INTRA_PRED_ADR);
+		buf_addr2 += S5P_FIMV_ENC_INTRAPRED_SIZE;
+		buf_size2 -= S5P_FIMV_ENC_INTRAPRED_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1),
+					S5P_FIMV_H264_NBOR_INFO_ADR);
+		buf_addr1 += S5P_FIMV_ENC_NBORINFO_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_NBORINFO_SIZE;
+		mfc_debug(2, "buf_size1: %d, buf_size2: %d\n",
+			buf_size1, buf_size2);
+		break;
+	case S5P_FIMV_CODEC_MPEG4_ENC:
+		for (i = 0; i < 2; i++) {
+			mfc_write(dev, OFFSETA(buf_addr1),
+				S5P_FIMV_ENC_REF0_LUMA_ADR + (4 * i));
+			buf_addr1 += enc_ref_y_size;
+			buf_size1 -= enc_ref_y_size;
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF2_LUMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_y_size;
+			buf_size2 -= enc_ref_y_size;
+		}
+		for (i = 0; i < 4; i++) {
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF0_CHROMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_c_size;
+			buf_size2 -= enc_ref_c_size;
+		}
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_UP_MV_ADR);
+		buf_addr1 += S5P_FIMV_ENC_UPMV_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_UPMV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1),
+						S5P_FIMV_MPEG4_COZERO_FLAG_ADR);
+		buf_addr1 += S5P_FIMV_ENC_COLFLG_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_COLFLG_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1),
+						S5P_FIMV_MPEG4_ACDC_COEF_ADR);
+		buf_addr1 += S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		mfc_debug(2, "buf_size1: %d, buf_size2: %d\n",
+			buf_size1, buf_size2);
+		break;
+	case S5P_FIMV_CODEC_H263_ENC:
+		for (i = 0; i < 2; i++) {
+			mfc_write(dev, OFFSETA(buf_addr1),
+				S5P_FIMV_ENC_REF0_LUMA_ADR + (4 * i));
+			buf_addr1 += enc_ref_y_size;
+			buf_size1 -= enc_ref_y_size;
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF2_LUMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_y_size;
+			buf_size2 -= enc_ref_y_size;
+		}
+		for (i = 0; i < 4; i++) {
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF0_CHROMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_c_size;
+			buf_size2 -= enc_ref_c_size;
+		}
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_UP_MV_ADR);
+		buf_addr1 += S5P_FIMV_ENC_UPMV_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_UPMV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_ACDC_COEF_ADR);
+		buf_addr1 += S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		mfc_debug(2, "buf_size1: %d, buf_size2: %d\n",
+			buf_size1, buf_size2);
+		break;
+	default:
+		mfc_err("Unknown codec set for encoding: %d\n",
+			ctx->codec_mode);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int s5p_mfc_set_enc_params(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	unsigned int reg;
+	unsigned int shm;
+
+	/* width */
+	mfc_write(dev, ctx->img_width, S5P_FIMV_ENC_HSIZE_PX);
+	/* height */
+	mfc_write(dev, ctx->img_height, S5P_FIMV_ENC_VSIZE_PX);
+	/* pictype : enable, IDR period */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	reg |= (1 << 18);
+	reg &= ~(0xFFFF);
+	reg |= p->gop_size;
+	mfc_write(dev, reg, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	mfc_write(dev, 0, S5P_FIMV_ENC_B_RECON_WRITE_ON);
+	/* multi-slice control */
+	/* multi-slice MB number or bit size */
+	mfc_write(dev, p->slice_mode, S5P_FIMV_ENC_MSLICE_CTRL);
+	if (p->slice_mode == V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB) {
+		mfc_write(dev, p->slice_mb, S5P_FIMV_ENC_MSLICE_MB);
+	} else if (p->slice_mode == V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES) {
+		mfc_write(dev, p->slice_bit, S5P_FIMV_ENC_MSLICE_BIT);
+	} else {
+		mfc_write(dev, 0, S5P_FIMV_ENC_MSLICE_MB);
+		mfc_write(dev, 0, S5P_FIMV_ENC_MSLICE_BIT);
+	}
+	/* cyclic intra refresh */
+	mfc_write(dev, p->intra_refresh_mb, S5P_FIMV_ENC_CIR_CTRL);
+	/* memory structure cur. frame */
+	if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12M)
+		mfc_write(dev, 0, S5P_FIMV_ENC_MAP_FOR_CUR);
+	else if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12MT)
+		mfc_write(dev, 3, S5P_FIMV_ENC_MAP_FOR_CUR);
+	/* padding control & value */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PADDING_CTRL);
+	if (p->pad) {
+		/** enable */
+		reg |= (1 << 31);
+		/** cr value */
+		reg &= ~(0xFF << 16);
+		reg |= (p->pad_cr << 16);
+		/** cb value */
+		reg &= ~(0xFF << 8);
+		reg |= (p->pad_cb << 8);
+		/** y value */
+		reg &= ~(0xFF);
+		reg |= (p->pad_luma);
+	} else {
+		/** disable & all value clear */
+		reg = 0;
+	}
+	mfc_write(dev, reg, S5P_FIMV_ENC_PADDING_CTRL);
+	/* rate control config. */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG);
+	/** frame-level rate control */
+	reg &= ~(0x1 << 9);
+	reg |= (p->rc_frame << 9);
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG);
+	/* bit rate */
+	if (p->rc_frame)
+		mfc_write(dev, p->rc_bitrate,
+			S5P_FIMV_ENC_RC_BIT_RATE);
+	else
+		mfc_write(dev, 0, S5P_FIMV_ENC_RC_BIT_RATE);
+	/* reaction coefficient */
+	if (p->rc_frame)
+		mfc_write(dev, p->rc_reaction_coeff, S5P_FIMV_ENC_RC_RPARA);
+	shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL);
+	/* seq header ctrl */
+	shm &= ~(0x1 << 3);
+	shm |= (p->seq_hdr_mode << 3);
+	/* frame skip mode */
+	shm &= ~(0x3 << 1);
+	shm |= (p->frame_skip_mode << 1);
+	s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL);
+	/* fixed target bit */
+	s5p_mfc_write_shm(ctx, p->fixed_target_bit, RC_CONTROL_CONFIG);
+	return 0;
+}
+
+static int s5p_mfc_set_enc_params_h264(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	struct s5p_mfc_h264_enc_params *p_264 = &p->codec.h264;
+	unsigned int reg;
+	unsigned int shm;
+
+	s5p_mfc_set_enc_params(ctx);
+	/* pictype : number of B */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	/* num_b_frame - 0 ~ 2 */
+	reg &= ~(0x3 << 16);
+	reg |= (p->num_b_frame << 16);
+	mfc_write(dev, reg, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	/* profile & level */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PROFILE);
+	/* level */
+	reg &= ~(0xFF << 8);
+	reg |= (p_264->level << 8);
+	/* profile - 0 ~ 2 */
+	reg &= ~(0x3F);
+	reg |= p_264->profile;
+	mfc_write(dev, reg, S5P_FIMV_ENC_PROFILE);
+	/* interlace  */
+	mfc_write(dev, p->interlace, S5P_FIMV_ENC_PIC_STRUCT);
+	/* height */
+	if (p->interlace)
+		mfc_write(dev, ctx->img_height >> 1, S5P_FIMV_ENC_VSIZE_PX);
+	/* loopfilter ctrl */
+	mfc_write(dev, p_264->loop_filter_mode, S5P_FIMV_ENC_LF_CTRL);
+	/* loopfilter alpha offset */
+	if (p_264->loop_filter_alpha < 0) {
+		reg = 0x10;
+		reg |= (0xFF - p_264->loop_filter_alpha) + 1;
+	} else {
+		reg = 0x00;
+		reg |= (p_264->loop_filter_alpha & 0xF);
+	}
+	mfc_write(dev, reg, S5P_FIMV_ENC_ALPHA_OFF);
+	/* loopfilter beta offset */
+	if (p_264->loop_filter_beta < 0) {
+		reg = 0x10;
+		reg |= (0xFF - p_264->loop_filter_beta) + 1;
+	} else {
+		reg = 0x00;
+		reg |= (p_264->loop_filter_beta & 0xF);
+	}
+	mfc_write(dev, reg, S5P_FIMV_ENC_BETA_OFF);
+	/* entropy coding mode */
+	if (p_264->entropy_mode == V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC)
+		mfc_write(dev, 1, S5P_FIMV_ENC_H264_ENTROPY_MODE);
+	else
+		mfc_write(dev, 0, S5P_FIMV_ENC_H264_ENTROPY_MODE);
+	/* number of ref. picture */
+	reg = mfc_read(dev, S5P_FIMV_ENC_H264_NUM_OF_REF);
+	/* num of ref. pictures of P */
+	reg &= ~(0x3 << 5);
+	reg |= (p_264->num_ref_pic_4p << 5);
+	/* max number of ref. pictures */
+	reg &= ~(0x1F);
+	reg |= p_264->max_ref_pic;
+	mfc_write(dev, reg, S5P_FIMV_ENC_H264_NUM_OF_REF);
+	/* 8x8 transform enable */
+	mfc_write(dev, p_264->_8x8_transform, S5P_FIMV_ENC_H264_TRANS_FLAG);
+	/* rate control config. */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG);
+	/* macroblock level rate control */
+	reg &= ~(0x1 << 8);
+	reg |= (p_264->rc_mb << 8);
+	/* frame QP */
+	reg &= ~(0x3F);
+	reg |= p_264->rc_frame_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG);
+	/* frame rate */
+	if (p->rc_frame && p->rc_framerate_denom)
+		mfc_write(dev, p->rc_framerate_num * 1000
+			/ p->rc_framerate_denom, S5P_FIMV_ENC_RC_FRAME_RATE);
+	else
+		mfc_write(dev, 0, S5P_FIMV_ENC_RC_FRAME_RATE);
+	/* max & min value of QP */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_QBOUND);
+	/* max QP */
+	reg &= ~(0x3F << 8);
+	reg |= (p_264->rc_max_qp << 8);
+	/* min QP */
+	reg &= ~(0x3F);
+	reg |= p_264->rc_min_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_QBOUND);
+	/* macroblock adaptive scaling features */
+	if (p_264->rc_mb) {
+		reg = mfc_read(dev, S5P_FIMV_ENC_RC_MB_CTRL);
+		/* dark region */
+		reg &= ~(0x1 << 3);
+		reg |= (p_264->rc_mb_dark << 3);
+		/* smooth region */
+		reg &= ~(0x1 << 2);
+		reg |= (p_264->rc_mb_smooth << 2);
+		/* static region */
+		reg &= ~(0x1 << 1);
+		reg |= (p_264->rc_mb_static << 1);
+		/* high activity region */
+		reg &= ~(0x1);
+		reg |= p_264->rc_mb_activity;
+		mfc_write(dev, reg, S5P_FIMV_ENC_RC_MB_CTRL);
+	}
+	if (!p->rc_frame &&
+	    !p_264->rc_mb) {
+		shm = s5p_mfc_read_shm(ctx, P_B_FRAME_QP);
+		shm &= ~(0xFFF);
+		shm |= ((p_264->rc_b_frame_qp & 0x3F) << 6);
+		shm |= (p_264->rc_p_frame_qp & 0x3F);
+		s5p_mfc_write_shm(ctx, shm, P_B_FRAME_QP);
+	}
+	/* extended encoder ctrl */
+	shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL);
+	/* AR VUI control */
+	shm &= ~(0x1 << 15);
+	shm |= (p_264->vui_sar << 1);
+	s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL);
+	if (p_264->vui_sar) {
+		/* aspect ration IDC */
+		shm = s5p_mfc_read_shm(ctx, SAMPLE_ASPECT_RATIO_IDC);
+		shm &= ~(0xFF);
+		shm |= p_264->vui_sar_idc;
+		s5p_mfc_write_shm(ctx, shm, SAMPLE_ASPECT_RATIO_IDC);
+		if (p_264->vui_sar_idc == 0xFF) {
+			/* sample  AR info */
+			shm = s5p_mfc_read_shm(ctx, EXTENDED_SAR);
+			shm &= ~(0xFFFFFFFF);
+			shm |= p_264->vui_ext_sar_width << 16;
+			shm |= p_264->vui_ext_sar_height;
+			s5p_mfc_write_shm(ctx, shm, EXTENDED_SAR);
+		}
+	}
+	/* intra picture period for H.264 */
+	shm = s5p_mfc_read_shm(ctx, H264_I_PERIOD);
+	/* control */
+	shm &= ~(0x1 << 16);
+	shm |= (p_264->open_gop << 16);
+	/* value */
+	if (p_264->open_gop) {
+		shm &= ~(0xFFFF);
+		shm |= p_264->open_gop_size;
+	}
+	s5p_mfc_write_shm(ctx, shm, H264_I_PERIOD);
+	/* extended encoder ctrl */
+	shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL);
+	/* vbv buffer size */
+	if (p->frame_skip_mode ==
+			V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT) {
+		shm &= ~(0xFFFF << 16);
+		shm |= (p_264->cpb_size << 16);
+	}
+	s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL);
+	return 0;
+}
+
+static int s5p_mfc_set_enc_params_mpeg4(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	struct s5p_mfc_mpeg4_enc_params *p_mpeg4 = &p->codec.mpeg4;
+	unsigned int reg;
+	unsigned int shm;
+	unsigned int framerate;
+
+	s5p_mfc_set_enc_params(ctx);
+	/* pictype : number of B */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	/* num_b_frame - 0 ~ 2 */
+	reg &= ~(0x3 << 16);
+	reg |= (p->num_b_frame << 16);
+	mfc_write(dev, reg, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	/* profile & level */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PROFILE);
+	/* level */
+	reg &= ~(0xFF << 8);
+	reg |= (p_mpeg4->level << 8);
+	/* profile - 0 ~ 2 */
+	reg &= ~(0x3F);
+	reg |= p_mpeg4->profile;
+	mfc_write(dev, reg, S5P_FIMV_ENC_PROFILE);
+	/* quarter_pixel */
+	mfc_write(dev, p_mpeg4->quarter_pixel, S5P_FIMV_ENC_MPEG4_QUART_PXL);
+	/* qp */
+	if (!p->rc_frame) {
+		shm = s5p_mfc_read_shm(ctx, P_B_FRAME_QP);
+		shm &= ~(0xFFF);
+		shm |= ((p_mpeg4->rc_b_frame_qp & 0x3F) << 6);
+		shm |= (p_mpeg4->rc_p_frame_qp & 0x3F);
+		s5p_mfc_write_shm(ctx, shm, P_B_FRAME_QP);
+	}
+	/* frame rate */
+	if (p->rc_frame) {
+		if (p->rc_framerate_denom > 0) {
+			framerate = p->rc_framerate_num * 1000 /
+						p->rc_framerate_denom;
+			mfc_write(dev, framerate,
+				S5P_FIMV_ENC_RC_FRAME_RATE);
+			shm = s5p_mfc_read_shm(ctx, RC_VOP_TIMING);
+			shm &= ~(0xFFFFFFFF);
+			shm |= (1 << 31);
+			shm |= ((p->rc_framerate_num & 0x7FFF) << 16);
+			shm |= (p->rc_framerate_denom & 0xFFFF);
+			s5p_mfc_write_shm(ctx, shm, RC_VOP_TIMING);
+		}
+	} else {
+		mfc_write(dev, 0, S5P_FIMV_ENC_RC_FRAME_RATE);
+	}
+	/* rate control config. */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG);
+	/* frame QP */
+	reg &= ~(0x3F);
+	reg |= p_mpeg4->rc_frame_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG);
+	/* max & min value of QP */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_QBOUND);
+	/* max QP */
+	reg &= ~(0x3F << 8);
+	reg |= (p_mpeg4->rc_max_qp << 8);
+	/* min QP */
+	reg &= ~(0x3F);
+	reg |= p_mpeg4->rc_min_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_QBOUND);
+	/* extended encoder ctrl */
+	shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL);
+	/* vbv buffer size */
+	if (p->frame_skip_mode ==
+			V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT) {
+		shm &= ~(0xFFFF << 16);
+		shm |= (p->vbv_size << 16);
+	}
+	s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL);
+	return 0;
+}
+
+static int s5p_mfc_set_enc_params_h263(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	struct s5p_mfc_mpeg4_enc_params *p_h263 = &p->codec.mpeg4;
+	unsigned int reg;
+	unsigned int shm;
+
+	s5p_mfc_set_enc_params(ctx);
+	/* qp */
+	if (!p->rc_frame) {
+		shm = s5p_mfc_read_shm(ctx, P_B_FRAME_QP);
+		shm &= ~(0xFFF);
+		shm |= (p_h263->rc_p_frame_qp & 0x3F);
+		s5p_mfc_write_shm(ctx, shm, P_B_FRAME_QP);
+	}
+	/* frame rate */
+	if (p->rc_frame && p->rc_framerate_denom)
+		mfc_write(dev, p->rc_framerate_num * 1000
+			/ p->rc_framerate_denom, S5P_FIMV_ENC_RC_FRAME_RATE);
+	else
+		mfc_write(dev, 0, S5P_FIMV_ENC_RC_FRAME_RATE);
+	/* rate control config. */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG);
+	/* frame QP */
+	reg &= ~(0x3F);
+	reg |= p_h263->rc_frame_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG);
+	/* max & min value of QP */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_QBOUND);
+	/* max QP */
+	reg &= ~(0x3F << 8);
+	reg |= (p_h263->rc_max_qp << 8);
+	/* min QP */
+	reg &= ~(0x3F);
+	reg |= p_h263->rc_min_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_QBOUND);
+	/* extended encoder ctrl */
+	shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL);
+	/* vbv buffer size */
+	if (p->frame_skip_mode ==
+			V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT) {
+		shm &= ~(0xFFFF << 16);
+		shm |= (p->vbv_size << 16);
+	}
+	s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL);
+	return 0;
+}
+
+/* Initialize decoding */
+int s5p_mfc_init_decode(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	s5p_mfc_set_shared_buffer(ctx);
+	/* Setup loop filter, for decoding this is only valid for MPEG4 */
+	if (ctx->codec_mode == S5P_FIMV_CODEC_MPEG4_DEC)
+		mfc_write(dev, ctx->loop_filter_mpeg4, S5P_FIMV_ENC_LF_CTRL);
+	else
+		mfc_write(dev, 0, S5P_FIMV_ENC_LF_CTRL);
+	mfc_write(dev, ((ctx->slice_interface & S5P_FIMV_SLICE_INT_MASK) <<
+		S5P_FIMV_SLICE_INT_SHIFT) | (ctx->display_delay_enable <<
+		S5P_FIMV_DDELAY_ENA_SHIFT) | ((ctx->display_delay &
+		S5P_FIMV_DDELAY_VAL_MASK) << S5P_FIMV_DDELAY_VAL_SHIFT),
+		S5P_FIMV_SI_CH0_DPB_CONF_CTRL);
+	mfc_write(dev,
+	((S5P_FIMV_CH_SEQ_HEADER & S5P_FIMV_CH_MASK) << S5P_FIMV_CH_SHIFT)
+				| (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID);
+	return 0;
+}
+
+static void s5p_mfc_set_flush(struct s5p_mfc_ctx *ctx, int flush)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned int dpb;
+
+	if (flush)
+		dpb = mfc_read(dev, S5P_FIMV_SI_CH0_DPB_CONF_CTRL) | (
+			S5P_FIMV_DPB_FLUSH_MASK << S5P_FIMV_DPB_FLUSH_SHIFT);
+	else
+		dpb = mfc_read(dev, S5P_FIMV_SI_CH0_DPB_CONF_CTRL) &
+			~(S5P_FIMV_DPB_FLUSH_MASK << S5P_FIMV_DPB_FLUSH_SHIFT);
+	mfc_write(dev, dpb, S5P_FIMV_SI_CH0_DPB_CONF_CTRL);
+}
+
+/* Decode a single frame */
+int s5p_mfc_decode_one_frame(struct s5p_mfc_ctx *ctx,
+					enum s5p_mfc_decode_arg last_frame)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mfc_write(dev, ctx->dec_dst_flag, S5P_FIMV_SI_CH0_RELEASE_BUF);
+	s5p_mfc_set_shared_buffer(ctx);
+	s5p_mfc_set_flush(ctx, ctx->dpb_flush_flag);
+	/* Issue different commands to instance basing on whether it
+	 * is the last frame or not. */
+	switch (last_frame) {
+	case MFC_DEC_FRAME:
+		mfc_write(dev, ((S5P_FIMV_CH_FRAME_START & S5P_FIMV_CH_MASK) <<
+		S5P_FIMV_CH_SHIFT) | (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID);
+		break;
+	case MFC_DEC_LAST_FRAME:
+		mfc_write(dev, ((S5P_FIMV_CH_LAST_FRAME & S5P_FIMV_CH_MASK) <<
+		S5P_FIMV_CH_SHIFT) | (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID);
+		break;
+	case MFC_DEC_RES_CHANGE:
+		mfc_write(dev, ((S5P_FIMV_CH_FRAME_START_REALLOC &
+		S5P_FIMV_CH_MASK) << S5P_FIMV_CH_SHIFT) | (ctx->inst_no),
+		S5P_FIMV_SI_CH0_INST_ID);
+		break;
+	}
+	mfc_debug(2, "Decoding a usual frame\n");
+	return 0;
+}
+
+int s5p_mfc_init_encode(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	if (ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC)
+		s5p_mfc_set_enc_params_h264(ctx);
+	else if (ctx->codec_mode == S5P_FIMV_CODEC_MPEG4_ENC)
+		s5p_mfc_set_enc_params_mpeg4(ctx);
+	else if (ctx->codec_mode == S5P_FIMV_CODEC_H263_ENC)
+		s5p_mfc_set_enc_params_h263(ctx);
+	else {
+		mfc_err("Unknown codec for encoding (%x)\n",
+			ctx->codec_mode);
+		return -EINVAL;
+	}
+	s5p_mfc_set_shared_buffer(ctx);
+	mfc_write(dev, ((S5P_FIMV_CH_SEQ_HEADER << 16) & 0x70000) |
+		(ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID);
+	return 0;
+}
+
+/* Encode a single frame */
+int s5p_mfc_encode_one_frame(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	/* memory structure cur. frame */
+	if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12M)
+		mfc_write(dev, 0, S5P_FIMV_ENC_MAP_FOR_CUR);
+	else if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12MT)
+		mfc_write(dev, 3, S5P_FIMV_ENC_MAP_FOR_CUR);
+	s5p_mfc_set_shared_buffer(ctx);
+	mfc_write(dev, (S5P_FIMV_CH_FRAME_START << 16 & 0x70000) |
+		(ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID);
+	return 0;
+}
+
+static int s5p_mfc_get_new_ctx(struct s5p_mfc_dev *dev)
+{
+	unsigned long flags;
+	int new_ctx;
+	int cnt;
+
+	spin_lock_irqsave(&dev->condlock, flags);
+	new_ctx = (dev->curr_ctx + 1) % MFC_NUM_CONTEXTS;
+	cnt = 0;
+	while (!test_bit(new_ctx, &dev->ctx_work_bits)) {
+		new_ctx = (new_ctx + 1) % MFC_NUM_CONTEXTS;
+		if (++cnt > MFC_NUM_CONTEXTS) {
+			/* No contexts to run */
+			spin_unlock_irqrestore(&dev->condlock, flags);
+			return -EAGAIN;
+		}
+	}
+	spin_unlock_irqrestore(&dev->condlock, flags);
+	return new_ctx;
+}
+
+static void s5p_mfc_run_res_change(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	s5p_mfc_set_dec_stream_buffer(ctx, 0, 0, 0);
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	s5p_mfc_decode_one_frame(ctx, MFC_DEC_RES_CHANGE);
+}
+
+static int s5p_mfc_run_dec_frame(struct s5p_mfc_ctx *ctx, int last_frame)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf *temp_vb;
+	unsigned long flags;
+	unsigned int index;
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	/* Frames are being decoded */
+	if (list_empty(&ctx->src_queue)) {
+		mfc_debug(2, "No src buffers\n");
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+		return -EAGAIN;
+	}
+	/* Get the next source buffer */
+	temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	temp_vb->used = 1;
+	s5p_mfc_set_dec_stream_buffer(ctx,
+		vb2_dma_contig_plane_paddr(temp_vb->b, 0), ctx->consumed_stream,
+					temp_vb->b->v4l2_planes[0].bytesused);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	index = temp_vb->b->v4l2_buf.index;
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	if (temp_vb->b->v4l2_planes[0].bytesused == 0) {
+		last_frame = MFC_DEC_LAST_FRAME;
+		mfc_debug(2, "Setting ctx->state to FINISHING\n");
+		ctx->state = MFCINST_FINISHING;
+	}
+	s5p_mfc_decode_one_frame(ctx, last_frame);
+	return 0;
+}
+
+static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *dst_mb;
+	struct s5p_mfc_buf *src_mb;
+	unsigned long src_y_addr, src_c_addr, dst_addr;
+	unsigned int dst_size;
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	if (list_empty(&ctx->src_queue)) {
+		mfc_debug(2, "no src buffers\n");
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+		return -EAGAIN;
+	}
+	if (list_empty(&ctx->dst_queue)) {
+		mfc_debug(2, "no dst buffers\n");
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+		return -EAGAIN;
+	}
+	src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	src_mb->used = 1;
+	src_y_addr = vb2_dma_contig_plane_paddr(src_mb->b, 0);
+	src_c_addr = vb2_dma_contig_plane_paddr(src_mb->b, 1);
+	s5p_mfc_set_enc_frame_buffer(ctx, src_y_addr, src_c_addr);
+	dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
+	dst_mb->used = 1;
+	dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+	dst_size = vb2_plane_size(dst_mb->b, 0);
+	s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	s5p_mfc_encode_one_frame(ctx);
+	return 0;
+}
+
+static void s5p_mfc_run_init_dec(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *temp_vb;
+
+	/* Initializing decoding - parsing header */
+	spin_lock_irqsave(&dev->irqlock, flags);
+	mfc_debug(2, "Preparing to init decoding\n");
+	temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	s5p_mfc_set_dec_desc_buffer(ctx);
+	mfc_debug(2, "Header size: %d\n", temp_vb->b->v4l2_planes[0].bytesused);
+	s5p_mfc_set_dec_stream_buffer(ctx,
+				vb2_dma_contig_plane_paddr(temp_vb->b, 0),
+				0, temp_vb->b->v4l2_planes[0].bytesused);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	s5p_mfc_init_decode(ctx);
+}
+
+static void s5p_mfc_run_init_enc(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *dst_mb;
+	unsigned long dst_addr;
+	unsigned int dst_size;
+
+	s5p_mfc_set_enc_ref_buffer(ctx);
+	spin_lock_irqsave(&dev->irqlock, flags);
+	dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
+	dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+	dst_size = vb2_plane_size(dst_mb->b, 0);
+	s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	s5p_mfc_init_encode(ctx);
+}
+
+static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *temp_vb;
+	int ret;
+
+	/*
+	 * Header was parsed now starting processing
+	 * First set the output frame buffers
+	 */
+	if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
+		mfc_err("It seems that not all destionation buffers were "
+			"mmaped\nMFC requires that all destination are mmaped "
+			"before starting processing\n");
+		return -EAGAIN;
+	}
+	spin_lock_irqsave(&dev->irqlock, flags);
+	if (list_empty(&ctx->src_queue)) {
+		mfc_err("Header has been deallocated in the middle of"
+			" initialization\n");
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+		return -EIO;
+	}
+	temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	mfc_debug(2, "Header size: %d\n", temp_vb->b->v4l2_planes[0].bytesused);
+	s5p_mfc_set_dec_stream_buffer(ctx,
+				vb2_dma_contig_plane_paddr(temp_vb->b, 0),
+				0, temp_vb->b->v4l2_planes[0].bytesused);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	ret = s5p_mfc_set_dec_frame_buffer(ctx);
+	if (ret) {
+		mfc_err("Failed to alloc frame mem\n");
+		ctx->state = MFCINST_ERROR;
+	}
+	return ret;
+}
+
+/* Try running an operation on hardware */
+void s5p_mfc_try_run(struct s5p_mfc_dev *dev)
+{
+	struct s5p_mfc_ctx *ctx;
+	int new_ctx;
+	unsigned int ret = 0;
+
+	if (test_bit(0, &dev->enter_suspend)) {
+		mfc_debug(1, "Entering suspend so do not schedule any jobs\n");
+		return;
+	}
+	/* Check whether hardware is not running */
+	if (test_and_set_bit(0, &dev->hw_lock) != 0) {
+		/* This is perfectly ok, the scheduled ctx should wait */
+		mfc_debug(1, "Couldn't lock HW\n");
+		return;
+	}
+	/* Choose the context to run */
+	new_ctx = s5p_mfc_get_new_ctx(dev);
+	if (new_ctx < 0) {
+		/* No contexts to run */
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0) {
+			mfc_err("Failed to unlock hardware\n");
+			return;
+		}
+		mfc_debug(1, "No ctx is scheduled to be run\n");
+		return;
+	}
+	ctx = dev->ctx[new_ctx];
+	/* Got context to run in ctx */
+	/*
+	 * Last frame has already been sent to MFC.
+	 * Now obtaining frames from MFC buffer
+	 */
+	s5p_mfc_clock_on();
+	if (ctx->type == MFCINST_DECODER) {
+		s5p_mfc_set_dec_desc_buffer(ctx);
+		switch (ctx->state) {
+		case MFCINST_FINISHING:
+			s5p_mfc_run_dec_frame(ctx, MFC_DEC_LAST_FRAME);
+			break;
+		case MFCINST_RUNNING:
+			ret = s5p_mfc_run_dec_frame(ctx, MFC_DEC_FRAME);
+			break;
+		case MFCINST_INIT:
+			s5p_mfc_clean_ctx_int_flags(ctx);
+			ret = s5p_mfc_open_inst_cmd(ctx);
+			break;
+		case MFCINST_RETURN_INST:
+			s5p_mfc_clean_ctx_int_flags(ctx);
+			ret = s5p_mfc_close_inst_cmd(ctx);
+			break;
+		case MFCINST_GOT_INST:
+			s5p_mfc_run_init_dec(ctx);
+			break;
+		case MFCINST_HEAD_PARSED:
+			ret = s5p_mfc_run_init_dec_buffers(ctx);
+			mfc_debug(1, "head parsed\n");
+			break;
+		case MFCINST_RES_CHANGE_INIT:
+			s5p_mfc_run_res_change(ctx);
+			break;
+		case MFCINST_RES_CHANGE_FLUSH:
+			s5p_mfc_run_dec_frame(ctx, MFC_DEC_FRAME);
+			break;
+		case MFCINST_RES_CHANGE_END:
+			mfc_debug(2, "Finished remaining frames after resolution change\n");
+			ctx->capture_state = QUEUE_FREE;
+			mfc_debug(2, "Will re-init the codec\n");
+			s5p_mfc_run_init_dec(ctx);
+			break;
+		default:
+			ret = -EAGAIN;
+		}
+	} else if (ctx->type == MFCINST_ENCODER) {
+		switch (ctx->state) {
+		case MFCINST_FINISHING:
+		case MFCINST_RUNNING:
+			ret = s5p_mfc_run_enc_frame(ctx);
+			break;
+		case MFCINST_INIT:
+			s5p_mfc_clean_ctx_int_flags(ctx);
+			ret = s5p_mfc_open_inst_cmd(ctx);
+			break;
+		case MFCINST_RETURN_INST:
+			s5p_mfc_clean_ctx_int_flags(ctx);
+			ret = s5p_mfc_close_inst_cmd(ctx);
+			break;
+		case MFCINST_GOT_INST:
+			s5p_mfc_run_init_enc(ctx);
+			break;
+		default:
+			ret = -EAGAIN;
+		}
+	} else {
+		mfc_err("Invalid context type: %d\n", ctx->type);
+		ret = -EAGAIN;
+	}
+
+	if (ret) {
+		/* Free hardware lock */
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			mfc_err("Failed to unlock hardware\n");
+
+		/* This is in deed imporant, as no operation has been
+		 * scheduled, reduce the clock count as no one will
+		 * ever do this, because no interrupt related to this try_run
+		 * will ever come from hardware. */
+		s5p_mfc_clock_off();
+	}
+}
+
+
+void s5p_mfc_cleanup_queue(struct list_head *lh, struct vb2_queue *vq)
+{
+	struct s5p_mfc_buf *b;
+	int i;
+
+	while (!list_empty(lh)) {
+		b = list_entry(lh->next, struct s5p_mfc_buf, list);
+		for (i = 0; i < b->b->num_planes; i++)
+			vb2_set_plane_payload(b->b, i, 0);
+		vb2_buffer_done(b->b, VB2_BUF_STATE_ERROR);
+		list_del(&b->list);
+	}
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.h b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h
new file mode 100644
index 0000000..db83836
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h
@@ -0,0 +1,91 @@
+/*
+ * drivers/media/video/samsung/mfc5/s5p_mfc_opr.h
+ *
+ * Header file for Samsung MFC (Multi Function Codec - FIMV) driver
+ * Contains declarations of hw related functions.
+ *
+ * Kamil Debski, Copyright (C) 2011 Samsung Electronics
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef S5P_MFC_OPR_H_
+#define S5P_MFC_OPR_H_
+
+#include "s5p_mfc_common.h"
+
+int s5p_mfc_init_decode(struct s5p_mfc_ctx *ctx);
+int s5p_mfc_init_encode(struct s5p_mfc_ctx *mfc_ctx);
+
+/* Decoding functions */
+int s5p_mfc_set_dec_frame_buffer(struct s5p_mfc_ctx *ctx);
+int s5p_mfc_set_dec_stream_buffer(struct s5p_mfc_ctx *ctx, int buf_addr,
+						  unsigned int start_num_byte,
+						  unsigned int buf_size);
+
+/* Encoding functions */
+void s5p_mfc_set_enc_frame_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long y_addr, unsigned long c_addr);
+int s5p_mfc_set_enc_stream_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long addr, unsigned int size);
+void s5p_mfc_get_enc_frame_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long *y_addr, unsigned long *c_addr);
+int s5p_mfc_set_enc_ref_buffer(struct s5p_mfc_ctx *mfc_ctx);
+
+int s5p_mfc_decode_one_frame(struct s5p_mfc_ctx *ctx,
+					enum s5p_mfc_decode_arg last_frame);
+int s5p_mfc_encode_one_frame(struct s5p_mfc_ctx *mfc_ctx);
+
+/* Memory allocation */
+int s5p_mfc_alloc_dec_temp_buffers(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_set_dec_desc_buffer(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_release_dec_desc_buffer(struct s5p_mfc_ctx *ctx);
+
+int s5p_mfc_alloc_codec_buffers(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_release_codec_buffers(struct s5p_mfc_ctx *ctx);
+
+int s5p_mfc_alloc_instance_buffer(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_release_instance_buffer(struct s5p_mfc_ctx *ctx);
+
+void s5p_mfc_try_run(struct s5p_mfc_dev *dev);
+void s5p_mfc_cleanup_queue(struct list_head *lh, struct vb2_queue *vq);
+
+#define s5p_mfc_get_dspl_y_adr()	(readl(dev->regs_base + \
+					S5P_FIMV_SI_DISPLAY_Y_ADR) << \
+					MFC_OFFSET_SHIFT)
+#define s5p_mfc_get_dec_y_adr()		(readl(dev->regs_base + \
+					S5P_FIMV_SI_DISPLAY_Y_ADR) << \
+					MFC_OFFSET_SHIFT)
+#define s5p_mfc_get_dspl_status()	readl(dev->regs_base + \
+						S5P_FIMV_SI_DISPLAY_STATUS)
+#define s5p_mfc_get_frame_type()	(readl(dev->regs_base + \
+						S5P_FIMV_DECODE_FRAME_TYPE) \
+					& S5P_FIMV_DECODE_FRAME_MASK)
+#define s5p_mfc_get_consumed_stream()	readl(dev->regs_base + \
+						S5P_FIMV_SI_CONSUMED_BYTES)
+#define s5p_mfc_get_int_reason()	(readl(dev->regs_base + \
+					S5P_FIMV_RISC2HOST_CMD) & \
+					S5P_FIMV_RISC2HOST_CMD_MASK)
+#define s5p_mfc_get_int_err()		readl(dev->regs_base + \
+						S5P_FIMV_RISC2HOST_ARG2)
+#define s5p_mfc_err_dec(x)		(((x) & S5P_FIMV_ERR_DEC_MASK) >> \
+							S5P_FIMV_ERR_DEC_SHIFT)
+#define s5p_mfc_err_dspl(x)		(((x) & S5P_FIMV_ERR_DSPL_MASK) >> \
+							S5P_FIMV_ERR_DSPL_SHIFT)
+#define s5p_mfc_get_img_width()		readl(dev->regs_base + \
+						S5P_FIMV_SI_HRESOL)
+#define s5p_mfc_get_img_height()	readl(dev->regs_base + \
+						S5P_FIMV_SI_VRESOL)
+#define s5p_mfc_get_dpb_count()		readl(dev->regs_base + \
+						S5P_FIMV_SI_BUF_NUMBER)
+#define s5p_mfc_get_inst_no()		readl(dev->regs_base + \
+						S5P_FIMV_RISC2HOST_ARG1)
+#define s5p_mfc_get_enc_strm_size()	readl(dev->regs_base + \
+						S5P_FIMV_ENC_SI_STRM_SIZE)
+#define s5p_mfc_get_enc_slice_type()	readl(dev->regs_base + \
+						S5P_FIMV_ENC_SI_SLICE_TYPE)
+
+#endif /* S5P_MFC_OPR_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_pm.c b/drivers/media/video/s5p-mfc/s5p_mfc_pm.c
new file mode 100644
index 0000000..f6a3035
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_pm.c
@@ -0,0 +1,117 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#ifdef CONFIG_PM_RUNTIME
+#include <linux/pm_runtime.h>
+#endif
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_pm.h"
+
+#define MFC_CLKNAME		"sclk_mfc"
+#define MFC_GATE_CLK_NAME	"mfc"
+
+#define CLK_DEBUG
+
+static struct s5p_mfc_pm *pm;
+static struct s5p_mfc_dev *p_dev;
+
+#ifdef CLK_DEBUG
+atomic_t clk_ref;
+#endif
+
+int s5p_mfc_init_pm(struct s5p_mfc_dev *dev)
+{
+	int ret = 0;
+
+	pm = &dev->pm;
+	p_dev = dev;
+	pm->clock_gate = clk_get(&dev->plat_dev->dev, MFC_GATE_CLK_NAME);
+	if (IS_ERR(pm->clock_gate)) {
+		mfc_err("Failed to get clock-gating control\n");
+		ret = -ENOENT;
+		goto err_g_ip_clk;
+	}
+	pm->clock = clk_get(&dev->plat_dev->dev, MFC_CLKNAME);
+	if (IS_ERR(pm->clock)) {
+		mfc_err("Failed to get MFC clock\n");
+		ret = -ENOENT;
+		goto err_g_ip_clk_2;
+	}
+	atomic_set(&pm->power, 0);
+#ifdef CONFIG_PM_RUNTIME
+	pm->device = &dev->plat_dev->dev;
+	pm_runtime_enable(pm->device);
+#endif
+#ifdef CLK_DEBUG
+	atomic_set(&clk_ref, 0);
+#endif
+	return 0;
+err_g_ip_clk_2:
+	clk_put(pm->clock_gate);
+err_g_ip_clk:
+	return ret;
+}
+
+void s5p_mfc_final_pm(struct s5p_mfc_dev *dev)
+{
+	clk_put(pm->clock_gate);
+	clk_put(pm->clock);
+#ifdef CONFIG_PM_RUNTIME
+	pm_runtime_disable(pm->device);
+#endif
+}
+
+int s5p_mfc_clock_on(void)
+{
+	int ret;
+#ifdef CLK_DEBUG
+	atomic_inc(&clk_ref);
+	mfc_debug(3, "+ %d", atomic_read(&clk_ref));
+#endif
+	ret = clk_enable(pm->clock_gate);
+	return ret;
+}
+
+void s5p_mfc_clock_off(void)
+{
+#ifdef CLK_DEBUG
+	atomic_dec(&clk_ref);
+	mfc_debug(3, "- %d", atomic_read(&clk_ref));
+#endif
+	clk_disable(pm->clock_gate);
+}
+
+int s5p_mfc_power_on(void)
+{
+#ifdef CONFIG_PM_RUNTIME
+	return pm_runtime_get_sync(pm->device);
+#else
+	atomic_set(&pm->power, 1);
+	return 0;
+#endif
+}
+
+int s5p_mfc_power_off(void)
+{
+#ifdef CONFIG_PM_RUNTIME
+	return pm_runtime_put_sync(pm->device);
+#else
+	atomic_set(&pm->power, 0);
+	return 0;
+#endif
+}
+
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_pm.h b/drivers/media/video/s5p-mfc/s5p_mfc_pm.h
new file mode 100644
index 0000000..5107914
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_pm.h
@@ -0,0 +1,24 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_pm.h
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_PM_H_
+#define S5P_MFC_PM_H_
+
+int s5p_mfc_init_pm(struct s5p_mfc_dev *dev);
+void s5p_mfc_final_pm(struct s5p_mfc_dev *dev);
+
+int s5p_mfc_clock_on(void);
+void s5p_mfc_clock_off(void);
+int s5p_mfc_power_on(void);
+int s5p_mfc_power_off(void);
+
+#endif /* S5P_MFC_PM_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_shm.c b/drivers/media/video/s5p-mfc/s5p_mfc_shm.c
new file mode 100644
index 0000000..91fdbac8
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_shm.c
@@ -0,0 +1,47 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_shm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifdef CONFIG_ARCH_EXYNOS4
+#include <linux/dma-mapping.h>
+#endif
+#include <linux/io.h>
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+
+int s5p_mfc_init_shm(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	void *shm_alloc_ctx = dev->alloc_ctx[MFC_BANK1_ALLOC_CTX];
+
+	ctx->shm_alloc = vb2_dma_contig_memops.alloc(shm_alloc_ctx,
+							SHARED_BUF_SIZE);
+	if (IS_ERR(ctx->shm_alloc)) {
+		mfc_err("failed to allocate shared memory\n");
+		return PTR_ERR(ctx->shm_alloc);
+	}
+	/* shm_ofs only keeps the offset from base (port a) */
+	ctx->shm_ofs = s5p_mfc_mem_cookie(shm_alloc_ctx, ctx->shm_alloc)
+								- dev->bank1;
+	BUG_ON(ctx->shm_ofs & ((1 << MFC_BANK1_ALIGN_ORDER) - 1));
+	ctx->shm = vb2_dma_contig_memops.vaddr(ctx->shm_alloc);
+	if (!ctx->shm) {
+		vb2_dma_contig_memops.put(ctx->shm_alloc);
+		ctx->shm_ofs = 0;
+		ctx->shm_alloc = NULL;
+		mfc_err("failed to virt addr of shared memory\n");
+		return -ENOMEM;
+	}
+	memset((void *)ctx->shm, 0, SHARED_BUF_SIZE);
+	wmb();
+	return 0;
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_shm.h b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
new file mode 100644
index 0000000..764eac6
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
@@ -0,0 +1,91 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_SHM_H_
+#define S5P_MFC_SHM_H_
+
+enum MFC_SHM_OFS
+{
+	EXTENEDED_DECODE_STATUS	= 0x00,	/* D */
+	SET_FRAME_TAG		= 0x04, /* D */
+	GET_FRAME_TAG_TOP	= 0x08, /* D */
+	GET_FRAME_TAG_BOT	= 0x0C, /* D */
+	PIC_TIME_TOP		= 0x10, /* D */
+	PIC_TIME_BOT		= 0x14, /* D */
+	START_BYTE_NUM		= 0x18, /* D */
+
+	CROP_INFO_H		= 0x20, /* D */
+	CROP_INFO_V		= 0x24, /* D */
+	EXT_ENC_CONTROL		= 0x28,	/* E */
+	ENC_PARAM_CHANGE	= 0x2C,	/* E */
+	RC_VOP_TIMING		= 0x30,	/* E, MPEG4 */
+	HEC_PERIOD		= 0x34,	/* E, MPEG4 */
+	METADATA_ENABLE		= 0x38, /* C */
+	METADATA_STATUS		= 0x3C, /* C */
+	METADATA_DISPLAY_INDEX	= 0x40,	/* C */
+	EXT_METADATA_START_ADDR	= 0x44, /* C */
+	PUT_EXTRADATA		= 0x48, /* C */
+	EXTRADATA_ADDR		= 0x4C, /* C */
+
+	ALLOC_LUMA_DPB_SIZE	= 0x64,	/* D */
+	ALLOC_CHROMA_DPB_SIZE	= 0x68,	/* D */
+	ALLOC_MV_SIZE		= 0x6C,	/* D */
+	P_B_FRAME_QP		= 0x70,	/* E */
+	SAMPLE_ASPECT_RATIO_IDC	= 0x74, /* E, H.264, depend on
+				ASPECT_RATIO_VUI_ENABLE in EXT_ENC_CONTROL */
+	EXTENDED_SAR		= 0x78, /* E, H.264, depned on
+				ASPECT_RATIO_VUI_ENABLE in EXT_ENC_CONTROL */
+	DISP_PIC_PROFILE	= 0x7C, /* D */
+	FLUSH_CMD_TYPE		= 0x80, /* C */
+	FLUSH_CMD_INBUF1	= 0x84, /* C */
+	FLUSH_CMD_INBUF2	= 0x88, /* C */
+	FLUSH_CMD_OUTBUF	= 0x8C, /* E */
+	NEW_RC_BIT_RATE		= 0x90, /* E, format as RC_BIT_RATE(0xC5A8)
+			depend on RC_BIT_RATE_CHANGE in ENC_PARAM_CHANGE */
+	NEW_RC_FRAME_RATE	= 0x94, /* E, format as RC_FRAME_RATE(0xD0D0)
+			depend on RC_FRAME_RATE_CHANGE in ENC_PARAM_CHANGE */
+	NEW_I_PERIOD		= 0x98, /* E, format as I_FRM_CTRL(0xC504)
+			depend on I_PERIOD_CHANGE in ENC_PARAM_CHANGE */
+	H264_I_PERIOD		= 0x9C, /* E, H.264, open GOP */
+	RC_CONTROL_CONFIG	= 0xA0, /* E */
+	BATCH_INPUT_ADDR	= 0xA4, /* E */
+	BATCH_OUTPUT_ADDR	= 0xA8, /* E */
+	BATCH_OUTPUT_SIZE	= 0xAC, /* E */
+	MIN_LUMA_DPB_SIZE	= 0xB0, /* D */
+	DEVICE_FORMAT_ID	= 0xB4, /* C */
+	H264_POC_TYPE		= 0xB8, /* D */
+	MIN_CHROMA_DPB_SIZE	= 0xBC, /* D */
+	DISP_PIC_FRAME_TYPE	= 0xC0, /* D */
+	FREE_LUMA_DPB		= 0xC4, /* D, VC1 MPEG4 */
+	ASPECT_RATIO_INFO	= 0xC8, /* D, MPEG4 */
+	EXTENDED_PAR		= 0xCC, /* D, MPEG4 */
+	DBG_HISTORY_INPUT0	= 0xD0, /* C */
+	DBG_HISTORY_INPUT1	= 0xD4,	/* C */
+	DBG_HISTORY_OUTPUT	= 0xD8,	/* C */
+	HIERARCHICAL_P_QP	= 0xE0, /* E, H.264 */
+};
+
+int s5p_mfc_init_shm(struct s5p_mfc_ctx *ctx);
+
+#define s5p_mfc_write_shm(ctx, x, ofs)		\
+	do {					\
+		writel(x, (ctx->shm + ofs));	\
+		wmb();				\
+	} while (0)
+
+static inline u32 s5p_mfc_read_shm(struct s5p_mfc_ctx *ctx, unsigned int ofs)
+{
+	rmb();
+	return readl(ctx->shm + ofs);
+}
+
+#endif /* S5P_MFC_SHM_H_ */
diff --git a/drivers/media/video/s5p-tv/Kconfig b/drivers/media/video/s5p-tv/Kconfig
new file mode 100644
index 0000000..9c37dee
--- /dev/null
+++ b/drivers/media/video/s5p-tv/Kconfig
@@ -0,0 +1,76 @@
+# drivers/media/video/s5p-tv/Kconfig
+#
+# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+#	http://www.samsung.com/
+# Tomasz Stanislawski <t.stanislaws@samsung.com>
+#
+# Licensed under GPL
+
+config VIDEO_SAMSUNG_S5P_TV
+	bool "Samsung TV driver for S5P platform (experimental)"
+	depends on PLAT_S5P
+	depends on EXPERIMENTAL
+	default n
+	---help---
+	  Say Y here to enable selecting the TV output devices for
+	  Samsung S5P platform.
+
+if VIDEO_SAMSUNG_S5P_TV
+
+config VIDEO_SAMSUNG_S5P_HDMI
+	tristate "Samsung HDMI Driver"
+	depends on VIDEO_V4L2
+	depends on VIDEO_SAMSUNG_S5P_TV
+	select VIDEO_SAMSUNG_S5P_HDMIPHY
+	help
+	  Say Y here if you want support for the HDMI output
+	  interface in S5P Samsung SoC. The driver can be compiled
+	  as module. It is an auxiliary driver, that exposes a V4L2
+	  subdev for use by other drivers. This driver requires
+	  hdmiphy driver to work correctly.
+
+config VIDEO_SAMSUNG_S5P_HDMI_DEBUG
+	bool "Enable debug for HDMI Driver"
+	depends on VIDEO_SAMSUNG_S5P_HDMI
+	default n
+	help
+	  Enables debugging for HDMI driver.
+
+config VIDEO_SAMSUNG_S5P_HDMIPHY
+	tristate "Samsung HDMIPHY Driver"
+	depends on VIDEO_DEV && VIDEO_V4L2 && I2C
+	depends on VIDEO_SAMSUNG_S5P_TV
+	help
+	  Say Y here if you want support for the physical HDMI
+	  interface in S5P Samsung SoC. The driver can be compiled
+	  as module. It is an I2C driver, that exposes a V4L2
+	  subdev for use by other drivers.
+
+config VIDEO_SAMSUNG_S5P_SDO
+	tristate "Samsung Analog TV Driver"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	depends on VIDEO_SAMSUNG_S5P_TV
+	help
+	  Say Y here if you want support for the analog TV output
+	  interface in S5P Samsung SoC. The driver can be compiled
+	  as module. It is an auxiliary driver, that exposes a V4L2
+	  subdev for use by other drivers. This driver requires
+	  hdmiphy driver to work correctly.
+
+config VIDEO_SAMSUNG_S5P_MIXER
+	tristate "Samsung Mixer and Video Processor Driver"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	depends on VIDEO_SAMSUNG_S5P_TV
+	select VIDEOBUF2_DMA_CONTIG
+	help
+	  Say Y here if you want support for the Mixer in Samsung S5P SoCs.
+	  This device produce image data to one of output interfaces.
+
+config VIDEO_SAMSUNG_S5P_MIXER_DEBUG
+	bool "Enable debug for Mixer Driver"
+	depends on VIDEO_SAMSUNG_S5P_MIXER
+	default n
+	help
+	  Enables debugging for Mixer driver.
+
+endif # VIDEO_SAMSUNG_S5P_TV
diff --git a/drivers/media/video/s5p-tv/Makefile b/drivers/media/video/s5p-tv/Makefile
new file mode 100644
index 0000000..37e4c17
--- /dev/null
+++ b/drivers/media/video/s5p-tv/Makefile
@@ -0,0 +1,17 @@
+# drivers/media/video/samsung/tvout/Makefile
+#
+# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+#	http://www.samsung.com/
+# Tomasz Stanislawski <t.stanislaws@samsung.com>
+#
+# Licensed under GPL
+
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY) += s5p-hdmiphy.o
+s5p-hdmiphy-y += hdmiphy_drv.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMI) += s5p-hdmi.o
+s5p-hdmi-y += hdmi_drv.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SDO) += s5p-sdo.o
+s5p-sdo-y += sdo_drv.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MIXER) += s5p-mixer.o
+s5p-mixer-y += mixer_drv.o mixer_video.o mixer_reg.o mixer_grp_layer.o mixer_vp_layer.o
+
diff --git a/drivers/media/video/s5p-tv/hdmi_drv.c b/drivers/media/video/s5p-tv/hdmi_drv.c
new file mode 100644
index 0000000..06d6663
--- /dev/null
+++ b/drivers/media/video/s5p-tv/hdmi_drv.c
@@ -0,0 +1,1042 @@
+/*
+ * Samsung HDMI interface driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#ifdef CONFIG_VIDEO_SAMSUNG_S5P_HDMI_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <media/v4l2-subdev.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/bug.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+
+#include "regs-hdmi.h"
+
+MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>");
+MODULE_DESCRIPTION("Samsung HDMI");
+MODULE_LICENSE("GPL");
+
+/* default preset configured on probe */
+#define HDMI_DEFAULT_PRESET V4L2_DV_1080P60
+
+struct hdmi_resources {
+	struct clk *hdmi;
+	struct clk *sclk_hdmi;
+	struct clk *sclk_pixel;
+	struct clk *sclk_hdmiphy;
+	struct clk *hdmiphy;
+	struct regulator_bulk_data *regul_bulk;
+	int regul_count;
+};
+
+struct hdmi_device {
+	/** base address of HDMI registers */
+	void __iomem *regs;
+	/** HDMI interrupt */
+	unsigned int irq;
+	/** pointer to device parent */
+	struct device *dev;
+	/** subdev generated by HDMI device */
+	struct v4l2_subdev sd;
+	/** V4L2 device structure */
+	struct v4l2_device v4l2_dev;
+	/** subdev of HDMIPHY interface */
+	struct v4l2_subdev *phy_sd;
+	/** configuration of current graphic mode */
+	const struct hdmi_preset_conf *cur_conf;
+	/** current preset */
+	u32 cur_preset;
+	/** other resources */
+	struct hdmi_resources res;
+};
+
+struct hdmi_driver_data {
+	int hdmiphy_bus;
+};
+
+struct hdmi_tg_regs {
+	u8 cmd;
+	u8 h_fsz_l;
+	u8 h_fsz_h;
+	u8 hact_st_l;
+	u8 hact_st_h;
+	u8 hact_sz_l;
+	u8 hact_sz_h;
+	u8 v_fsz_l;
+	u8 v_fsz_h;
+	u8 vsync_l;
+	u8 vsync_h;
+	u8 vsync2_l;
+	u8 vsync2_h;
+	u8 vact_st_l;
+	u8 vact_st_h;
+	u8 vact_sz_l;
+	u8 vact_sz_h;
+	u8 field_chg_l;
+	u8 field_chg_h;
+	u8 vact_st2_l;
+	u8 vact_st2_h;
+	u8 vsync_top_hdmi_l;
+	u8 vsync_top_hdmi_h;
+	u8 vsync_bot_hdmi_l;
+	u8 vsync_bot_hdmi_h;
+	u8 field_top_hdmi_l;
+	u8 field_top_hdmi_h;
+	u8 field_bot_hdmi_l;
+	u8 field_bot_hdmi_h;
+};
+
+struct hdmi_core_regs {
+	u8 h_blank[2];
+	u8 v_blank[3];
+	u8 h_v_line[3];
+	u8 vsync_pol[1];
+	u8 int_pro_mode[1];
+	u8 v_blank_f[3];
+	u8 h_sync_gen[3];
+	u8 v_sync_gen1[3];
+	u8 v_sync_gen2[3];
+	u8 v_sync_gen3[3];
+};
+
+struct hdmi_preset_conf {
+	struct hdmi_core_regs core;
+	struct hdmi_tg_regs tg;
+	struct v4l2_mbus_framefmt mbus_fmt;
+};
+
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy", 0x38),
+};
+
+static struct hdmi_driver_data hdmi_driver_data[] = {
+	{ .hdmiphy_bus = 3 },
+	{ .hdmiphy_bus = 8 },
+};
+
+static struct platform_device_id hdmi_driver_types[] = {
+	{
+		.name		= "s5pv210-hdmi",
+		.driver_data	= (unsigned long)&hdmi_driver_data[0],
+	}, {
+		.name		= "exynos4-hdmi",
+		.driver_data	= (unsigned long)&hdmi_driver_data[1],
+	}, {
+		/* end node */
+	}
+};
+
+static const struct v4l2_subdev_ops hdmi_sd_ops;
+
+static struct hdmi_device *sd_to_hdmi_dev(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct hdmi_device, sd);
+}
+
+static inline
+void hdmi_write(struct hdmi_device *hdev, u32 reg_id, u32 value)
+{
+	writel(value, hdev->regs + reg_id);
+}
+
+static inline
+void hdmi_write_mask(struct hdmi_device *hdev, u32 reg_id, u32 value, u32 mask)
+{
+	u32 old = readl(hdev->regs + reg_id);
+	value = (value & mask) | (old & ~mask);
+	writel(value, hdev->regs + reg_id);
+}
+
+static inline
+void hdmi_writeb(struct hdmi_device *hdev, u32 reg_id, u8 value)
+{
+	writeb(value, hdev->regs + reg_id);
+}
+
+static inline u32 hdmi_read(struct hdmi_device *hdev, u32 reg_id)
+{
+	return readl(hdev->regs + reg_id);
+}
+
+static irqreturn_t hdmi_irq_handler(int irq, void *dev_data)
+{
+	struct hdmi_device *hdev = dev_data;
+	u32 intc_flag;
+
+	(void)irq;
+	intc_flag = hdmi_read(hdev, HDMI_INTC_FLAG);
+	/* clearing flags for HPD plug/unplug */
+	if (intc_flag & HDMI_INTC_FLAG_HPD_UNPLUG) {
+		printk(KERN_INFO "unplugged\n");
+		hdmi_write_mask(hdev, HDMI_INTC_FLAG, ~0,
+			HDMI_INTC_FLAG_HPD_UNPLUG);
+	}
+	if (intc_flag & HDMI_INTC_FLAG_HPD_PLUG) {
+		printk(KERN_INFO "plugged\n");
+		hdmi_write_mask(hdev, HDMI_INTC_FLAG, ~0,
+			HDMI_INTC_FLAG_HPD_PLUG);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void hdmi_reg_init(struct hdmi_device *hdev)
+{
+	/* enable HPD interrupts */
+	hdmi_write_mask(hdev, HDMI_INTC_CON, ~0, HDMI_INTC_EN_GLOBAL |
+		HDMI_INTC_EN_HPD_PLUG | HDMI_INTC_EN_HPD_UNPLUG);
+	/* choose HDMI mode */
+	hdmi_write_mask(hdev, HDMI_MODE_SEL,
+		HDMI_MODE_HDMI_EN, HDMI_MODE_MASK);
+	/* disable bluescreen */
+	hdmi_write_mask(hdev, HDMI_CON_0, 0, HDMI_BLUE_SCR_EN);
+	/* choose bluescreen (fecal) color */
+	hdmi_writeb(hdev, HDMI_BLUE_SCREEN_0, 0x12);
+	hdmi_writeb(hdev, HDMI_BLUE_SCREEN_1, 0x34);
+	hdmi_writeb(hdev, HDMI_BLUE_SCREEN_2, 0x56);
+	/* enable AVI packet every vsync, fixes purple line problem */
+	hdmi_writeb(hdev, HDMI_AVI_CON, 0x02);
+	/* force YUV444, look to CEA-861-D, table 7 for more detail */
+	hdmi_writeb(hdev, HDMI_AVI_BYTE(0), 2 << 5);
+	hdmi_write_mask(hdev, HDMI_CON_1, 2, 3 << 5);
+}
+
+static void hdmi_timing_apply(struct hdmi_device *hdev,
+	const struct hdmi_preset_conf *conf)
+{
+	const struct hdmi_core_regs *core = &conf->core;
+	const struct hdmi_tg_regs *tg = &conf->tg;
+
+	/* setting core registers */
+	hdmi_writeb(hdev, HDMI_H_BLANK_0, core->h_blank[0]);
+	hdmi_writeb(hdev, HDMI_H_BLANK_1, core->h_blank[1]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_0, core->v_blank[0]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_1, core->v_blank[1]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_2, core->v_blank[2]);
+	hdmi_writeb(hdev, HDMI_H_V_LINE_0, core->h_v_line[0]);
+	hdmi_writeb(hdev, HDMI_H_V_LINE_1, core->h_v_line[1]);
+	hdmi_writeb(hdev, HDMI_H_V_LINE_2, core->h_v_line[2]);
+	hdmi_writeb(hdev, HDMI_VSYNC_POL, core->vsync_pol[0]);
+	hdmi_writeb(hdev, HDMI_INT_PRO_MODE, core->int_pro_mode[0]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_F_0, core->v_blank_f[0]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_F_1, core->v_blank_f[1]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_F_2, core->v_blank_f[2]);
+	hdmi_writeb(hdev, HDMI_H_SYNC_GEN_0, core->h_sync_gen[0]);
+	hdmi_writeb(hdev, HDMI_H_SYNC_GEN_1, core->h_sync_gen[1]);
+	hdmi_writeb(hdev, HDMI_H_SYNC_GEN_2, core->h_sync_gen[2]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_1_0, core->v_sync_gen1[0]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_1_1, core->v_sync_gen1[1]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_1_2, core->v_sync_gen1[2]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_2_0, core->v_sync_gen2[0]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_2_1, core->v_sync_gen2[1]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_2_2, core->v_sync_gen2[2]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_3_0, core->v_sync_gen3[0]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_3_1, core->v_sync_gen3[1]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_3_2, core->v_sync_gen3[2]);
+	/* Timing generator registers */
+	hdmi_writeb(hdev, HDMI_TG_H_FSZ_L, tg->h_fsz_l);
+	hdmi_writeb(hdev, HDMI_TG_H_FSZ_H, tg->h_fsz_h);
+	hdmi_writeb(hdev, HDMI_TG_HACT_ST_L, tg->hact_st_l);
+	hdmi_writeb(hdev, HDMI_TG_HACT_ST_H, tg->hact_st_h);
+	hdmi_writeb(hdev, HDMI_TG_HACT_SZ_L, tg->hact_sz_l);
+	hdmi_writeb(hdev, HDMI_TG_HACT_SZ_H, tg->hact_sz_h);
+	hdmi_writeb(hdev, HDMI_TG_V_FSZ_L, tg->v_fsz_l);
+	hdmi_writeb(hdev, HDMI_TG_V_FSZ_H, tg->v_fsz_h);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_L, tg->vsync_l);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_H, tg->vsync_h);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC2_L, tg->vsync2_l);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC2_H, tg->vsync2_h);
+	hdmi_writeb(hdev, HDMI_TG_VACT_ST_L, tg->vact_st_l);
+	hdmi_writeb(hdev, HDMI_TG_VACT_ST_H, tg->vact_st_h);
+	hdmi_writeb(hdev, HDMI_TG_VACT_SZ_L, tg->vact_sz_l);
+	hdmi_writeb(hdev, HDMI_TG_VACT_SZ_H, tg->vact_sz_h);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_CHG_L, tg->field_chg_l);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_CHG_H, tg->field_chg_h);
+	hdmi_writeb(hdev, HDMI_TG_VACT_ST2_L, tg->vact_st2_l);
+	hdmi_writeb(hdev, HDMI_TG_VACT_ST2_H, tg->vact_st2_h);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_TOP_HDMI_L, tg->vsync_top_hdmi_l);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_TOP_HDMI_H, tg->vsync_top_hdmi_h);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_BOT_HDMI_L, tg->vsync_bot_hdmi_l);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_BOT_HDMI_H, tg->vsync_bot_hdmi_h);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_TOP_HDMI_L, tg->field_top_hdmi_l);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_TOP_HDMI_H, tg->field_top_hdmi_h);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_BOT_HDMI_L, tg->field_bot_hdmi_l);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_BOT_HDMI_H, tg->field_bot_hdmi_h);
+}
+
+static int hdmi_conf_apply(struct hdmi_device *hdmi_dev)
+{
+	struct device *dev = hdmi_dev->dev;
+	const struct hdmi_preset_conf *conf = hdmi_dev->cur_conf;
+	struct v4l2_dv_preset preset;
+	int ret;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	/* reset hdmiphy */
+	hdmi_write_mask(hdmi_dev, HDMI_PHY_RSTOUT, ~0, HDMI_PHY_SW_RSTOUT);
+	mdelay(10);
+	hdmi_write_mask(hdmi_dev, HDMI_PHY_RSTOUT,  0, HDMI_PHY_SW_RSTOUT);
+	mdelay(10);
+
+	/* configure presets */
+	preset.preset = hdmi_dev->cur_preset;
+	ret = v4l2_subdev_call(hdmi_dev->phy_sd, video, s_dv_preset, &preset);
+	if (ret) {
+		dev_err(dev, "failed to set preset (%u)\n", preset.preset);
+		return ret;
+	}
+
+	/* resetting HDMI core */
+	hdmi_write_mask(hdmi_dev, HDMI_CORE_RSTOUT,  0, HDMI_CORE_SW_RSTOUT);
+	mdelay(10);
+	hdmi_write_mask(hdmi_dev, HDMI_CORE_RSTOUT, ~0, HDMI_CORE_SW_RSTOUT);
+	mdelay(10);
+
+	hdmi_reg_init(hdmi_dev);
+
+	/* setting core registers */
+	hdmi_timing_apply(hdmi_dev, conf);
+
+	return 0;
+}
+
+static void hdmi_dumpregs(struct hdmi_device *hdev, char *prefix)
+{
+#define DUMPREG(reg_id) \
+	dev_dbg(hdev->dev, "%s:" #reg_id " = %08x\n", prefix, \
+		readl(hdev->regs + reg_id))
+
+	dev_dbg(hdev->dev, "%s: ---- CONTROL REGISTERS ----\n", prefix);
+	DUMPREG(HDMI_INTC_FLAG);
+	DUMPREG(HDMI_INTC_CON);
+	DUMPREG(HDMI_HPD_STATUS);
+	DUMPREG(HDMI_PHY_RSTOUT);
+	DUMPREG(HDMI_PHY_VPLL);
+	DUMPREG(HDMI_PHY_CMU);
+	DUMPREG(HDMI_CORE_RSTOUT);
+
+	dev_dbg(hdev->dev, "%s: ---- CORE REGISTERS ----\n", prefix);
+	DUMPREG(HDMI_CON_0);
+	DUMPREG(HDMI_CON_1);
+	DUMPREG(HDMI_CON_2);
+	DUMPREG(HDMI_SYS_STATUS);
+	DUMPREG(HDMI_PHY_STATUS);
+	DUMPREG(HDMI_STATUS_EN);
+	DUMPREG(HDMI_HPD);
+	DUMPREG(HDMI_MODE_SEL);
+	DUMPREG(HDMI_HPD_GEN);
+	DUMPREG(HDMI_DC_CONTROL);
+	DUMPREG(HDMI_VIDEO_PATTERN_GEN);
+
+	dev_dbg(hdev->dev, "%s: ---- CORE SYNC REGISTERS ----\n", prefix);
+	DUMPREG(HDMI_H_BLANK_0);
+	DUMPREG(HDMI_H_BLANK_1);
+	DUMPREG(HDMI_V_BLANK_0);
+	DUMPREG(HDMI_V_BLANK_1);
+	DUMPREG(HDMI_V_BLANK_2);
+	DUMPREG(HDMI_H_V_LINE_0);
+	DUMPREG(HDMI_H_V_LINE_1);
+	DUMPREG(HDMI_H_V_LINE_2);
+	DUMPREG(HDMI_VSYNC_POL);
+	DUMPREG(HDMI_INT_PRO_MODE);
+	DUMPREG(HDMI_V_BLANK_F_0);
+	DUMPREG(HDMI_V_BLANK_F_1);
+	DUMPREG(HDMI_V_BLANK_F_2);
+	DUMPREG(HDMI_H_SYNC_GEN_0);
+	DUMPREG(HDMI_H_SYNC_GEN_1);
+	DUMPREG(HDMI_H_SYNC_GEN_2);
+	DUMPREG(HDMI_V_SYNC_GEN_1_0);
+	DUMPREG(HDMI_V_SYNC_GEN_1_1);
+	DUMPREG(HDMI_V_SYNC_GEN_1_2);
+	DUMPREG(HDMI_V_SYNC_GEN_2_0);
+	DUMPREG(HDMI_V_SYNC_GEN_2_1);
+	DUMPREG(HDMI_V_SYNC_GEN_2_2);
+	DUMPREG(HDMI_V_SYNC_GEN_3_0);
+	DUMPREG(HDMI_V_SYNC_GEN_3_1);
+	DUMPREG(HDMI_V_SYNC_GEN_3_2);
+
+	dev_dbg(hdev->dev, "%s: ---- TG REGISTERS ----\n", prefix);
+	DUMPREG(HDMI_TG_CMD);
+	DUMPREG(HDMI_TG_H_FSZ_L);
+	DUMPREG(HDMI_TG_H_FSZ_H);
+	DUMPREG(HDMI_TG_HACT_ST_L);
+	DUMPREG(HDMI_TG_HACT_ST_H);
+	DUMPREG(HDMI_TG_HACT_SZ_L);
+	DUMPREG(HDMI_TG_HACT_SZ_H);
+	DUMPREG(HDMI_TG_V_FSZ_L);
+	DUMPREG(HDMI_TG_V_FSZ_H);
+	DUMPREG(HDMI_TG_VSYNC_L);
+	DUMPREG(HDMI_TG_VSYNC_H);
+	DUMPREG(HDMI_TG_VSYNC2_L);
+	DUMPREG(HDMI_TG_VSYNC2_H);
+	DUMPREG(HDMI_TG_VACT_ST_L);
+	DUMPREG(HDMI_TG_VACT_ST_H);
+	DUMPREG(HDMI_TG_VACT_SZ_L);
+	DUMPREG(HDMI_TG_VACT_SZ_H);
+	DUMPREG(HDMI_TG_FIELD_CHG_L);
+	DUMPREG(HDMI_TG_FIELD_CHG_H);
+	DUMPREG(HDMI_TG_VACT_ST2_L);
+	DUMPREG(HDMI_TG_VACT_ST2_H);
+	DUMPREG(HDMI_TG_VSYNC_TOP_HDMI_L);
+	DUMPREG(HDMI_TG_VSYNC_TOP_HDMI_H);
+	DUMPREG(HDMI_TG_VSYNC_BOT_HDMI_L);
+	DUMPREG(HDMI_TG_VSYNC_BOT_HDMI_H);
+	DUMPREG(HDMI_TG_FIELD_TOP_HDMI_L);
+	DUMPREG(HDMI_TG_FIELD_TOP_HDMI_H);
+	DUMPREG(HDMI_TG_FIELD_BOT_HDMI_L);
+	DUMPREG(HDMI_TG_FIELD_BOT_HDMI_H);
+#undef DUMPREG
+}
+
+static const struct hdmi_preset_conf hdmi_conf_480p = {
+	.core = {
+		.h_blank = {0x8a, 0x00},
+		.v_blank = {0x0d, 0x6a, 0x01},
+		.h_v_line = {0x0d, 0xa2, 0x35},
+		.vsync_pol = {0x01},
+		.int_pro_mode = {0x00},
+		.v_blank_f = {0x00, 0x00, 0x00},
+		.h_sync_gen = {0x0e, 0x30, 0x11},
+		.v_sync_gen1 = {0x0f, 0x90, 0x00},
+		/* other don't care */
+	},
+	.tg = {
+		0x00, /* cmd */
+		0x5a, 0x03, /* h_fsz */
+		0x8a, 0x00, 0xd0, 0x02, /* hact */
+		0x0d, 0x02, /* v_fsz */
+		0x01, 0x00, 0x33, 0x02, /* vsync */
+		0x2d, 0x00, 0xe0, 0x01, /* vact */
+		0x33, 0x02, /* field_chg */
+		0x49, 0x02, /* vact_st2 */
+		0x01, 0x00, 0x33, 0x02, /* vsync top/bot */
+		0x01, 0x00, 0x33, 0x02, /* field top/bot */
+	},
+	.mbus_fmt = {
+		.width = 720,
+		.height = 480,
+		.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
+		.field = V4L2_FIELD_NONE,
+	},
+};
+
+static const struct hdmi_preset_conf hdmi_conf_720p60 = {
+	.core = {
+		.h_blank = {0x72, 0x01},
+		.v_blank = {0xee, 0xf2, 0x00},
+		.h_v_line = {0xee, 0x22, 0x67},
+		.vsync_pol = {0x00},
+		.int_pro_mode = {0x00},
+		.v_blank_f = {0x00, 0x00, 0x00}, /* don't care */
+		.h_sync_gen = {0x6c, 0x50, 0x02},
+		.v_sync_gen1 = {0x0a, 0x50, 0x00},
+		/* other don't care */
+	},
+	.tg = {
+		0x00, /* cmd */
+		0x72, 0x06, /* h_fsz */
+		0x72, 0x01, 0x00, 0x05, /* hact */
+		0xee, 0x02, /* v_fsz */
+		0x01, 0x00, 0x33, 0x02, /* vsync */
+		0x1e, 0x00, 0xd0, 0x02, /* vact */
+		0x33, 0x02, /* field_chg */
+		0x49, 0x02, /* vact_st2 */
+		0x01, 0x00, 0x33, 0x02, /* vsync top/bot */
+		0x01, 0x00, 0x33, 0x02, /* field top/bot */
+	},
+	.mbus_fmt = {
+		.width = 1280,
+		.height = 720,
+		.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
+		.field = V4L2_FIELD_NONE,
+	},
+};
+
+static const struct hdmi_preset_conf hdmi_conf_1080p50 = {
+	.core = {
+		.h_blank = {0xd0, 0x02},
+		.v_blank = {0x65, 0x6c, 0x01},
+		.h_v_line = {0x65, 0x04, 0xa5},
+		.vsync_pol = {0x00},
+		.int_pro_mode = {0x00},
+		.v_blank_f = {0x00, 0x00, 0x00}, /* don't care */
+		.h_sync_gen = {0x0e, 0xea, 0x08},
+		.v_sync_gen1 = {0x09, 0x40, 0x00},
+		/* other don't care */
+	},
+	.tg = {
+		0x00, /* cmd */
+		0x98, 0x08, /* h_fsz */
+		0x18, 0x01, 0x80, 0x07, /* hact */
+		0x65, 0x04, /* v_fsz */
+		0x01, 0x00, 0x33, 0x02, /* vsync */
+		0x2d, 0x00, 0x38, 0x04, /* vact */
+		0x33, 0x02, /* field_chg */
+		0x49, 0x02, /* vact_st2 */
+		0x01, 0x00, 0x33, 0x02, /* vsync top/bot */
+		0x01, 0x00, 0x33, 0x02, /* field top/bot */
+	},
+	.mbus_fmt = {
+		.width = 1920,
+		.height = 1080,
+		.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
+		.field = V4L2_FIELD_NONE,
+	},
+};
+
+static const struct hdmi_preset_conf hdmi_conf_1080p60 = {
+	.core = {
+		.h_blank = {0x18, 0x01},
+		.v_blank = {0x65, 0x6c, 0x01},
+		.h_v_line = {0x65, 0x84, 0x89},
+		.vsync_pol = {0x00},
+		.int_pro_mode = {0x00},
+		.v_blank_f = {0x00, 0x00, 0x00}, /* don't care */
+		.h_sync_gen = {0x56, 0x08, 0x02},
+		.v_sync_gen1 = {0x09, 0x40, 0x00},
+		/* other don't care */
+	},
+	.tg = {
+		0x00, /* cmd */
+		0x98, 0x08, /* h_fsz */
+		0x18, 0x01, 0x80, 0x07, /* hact */
+		0x65, 0x04, /* v_fsz */
+		0x01, 0x00, 0x33, 0x02, /* vsync */
+		0x2d, 0x00, 0x38, 0x04, /* vact */
+		0x33, 0x02, /* field_chg */
+		0x48, 0x02, /* vact_st2 */
+		0x01, 0x00, 0x01, 0x00, /* vsync top/bot */
+		0x01, 0x00, 0x33, 0x02, /* field top/bot */
+	},
+	.mbus_fmt = {
+		.width = 1920,
+		.height = 1080,
+		.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
+		.field = V4L2_FIELD_NONE,
+	},
+};
+
+static const struct {
+	u32 preset;
+	const struct hdmi_preset_conf *conf;
+} hdmi_conf[] = {
+	{ V4L2_DV_480P59_94, &hdmi_conf_480p },
+	{ V4L2_DV_720P59_94, &hdmi_conf_720p60 },
+	{ V4L2_DV_1080P50, &hdmi_conf_1080p50 },
+	{ V4L2_DV_1080P30, &hdmi_conf_1080p60 },
+	{ V4L2_DV_1080P60, &hdmi_conf_1080p60 },
+};
+
+static const struct hdmi_preset_conf *hdmi_preset2conf(u32 preset)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hdmi_conf); ++i)
+		if (hdmi_conf[i].preset == preset)
+			return  hdmi_conf[i].conf;
+	return NULL;
+}
+
+static int hdmi_streamon(struct hdmi_device *hdev)
+{
+	struct device *dev = hdev->dev;
+	struct hdmi_resources *res = &hdev->res;
+	int ret, tries;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	ret = v4l2_subdev_call(hdev->phy_sd, video, s_stream, 1);
+	if (ret)
+		return ret;
+
+	/* waiting for HDMIPHY's PLL to get to steady state */
+	for (tries = 100; tries; --tries) {
+		u32 val = hdmi_read(hdev, HDMI_PHY_STATUS);
+		if (val & HDMI_PHY_STATUS_READY)
+			break;
+		mdelay(1);
+	}
+	/* steady state not achieved */
+	if (tries == 0) {
+		dev_err(dev, "hdmiphy's pll could not reach steady state.\n");
+		v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0);
+		hdmi_dumpregs(hdev, "s_stream");
+		return -EIO;
+	}
+
+	/* hdmiphy clock is used for HDMI in streaming mode */
+	clk_disable(res->sclk_hdmi);
+	clk_set_parent(res->sclk_hdmi, res->sclk_hdmiphy);
+	clk_enable(res->sclk_hdmi);
+
+	/* enable HDMI and timing generator */
+	hdmi_write_mask(hdev, HDMI_CON_0, ~0, HDMI_EN);
+	hdmi_write_mask(hdev, HDMI_TG_CMD, ~0, HDMI_TG_EN);
+	hdmi_dumpregs(hdev, "streamon");
+	return 0;
+}
+
+static int hdmi_streamoff(struct hdmi_device *hdev)
+{
+	struct device *dev = hdev->dev;
+	struct hdmi_resources *res = &hdev->res;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	hdmi_write_mask(hdev, HDMI_CON_0, 0, HDMI_EN);
+	hdmi_write_mask(hdev, HDMI_TG_CMD, 0, HDMI_TG_EN);
+
+	/* pixel(vpll) clock is used for HDMI in config mode */
+	clk_disable(res->sclk_hdmi);
+	clk_set_parent(res->sclk_hdmi, res->sclk_pixel);
+	clk_enable(res->sclk_hdmi);
+
+	v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0);
+
+	hdmi_dumpregs(hdev, "streamoff");
+	return 0;
+}
+
+static int hdmi_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+	struct device *dev = hdev->dev;
+
+	dev_dbg(dev, "%s(%d)\n", __func__, enable);
+	if (enable)
+		return hdmi_streamon(hdev);
+	return hdmi_streamoff(hdev);
+}
+
+static void hdmi_resource_poweron(struct hdmi_resources *res)
+{
+	/* turn HDMI power on */
+	regulator_bulk_enable(res->regul_count, res->regul_bulk);
+	/* power-on hdmi physical interface */
+	clk_enable(res->hdmiphy);
+	/* use VPP as parent clock; HDMIPHY is not working yet */
+	clk_set_parent(res->sclk_hdmi, res->sclk_pixel);
+	/* turn clocks on */
+	clk_enable(res->sclk_hdmi);
+}
+
+static void hdmi_resource_poweroff(struct hdmi_resources *res)
+{
+	/* turn clocks off */
+	clk_disable(res->sclk_hdmi);
+	/* power-off hdmiphy */
+	clk_disable(res->hdmiphy);
+	/* turn HDMI power off */
+	regulator_bulk_disable(res->regul_count, res->regul_bulk);
+}
+
+static int hdmi_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+	int ret;
+
+	if (on)
+		ret = pm_runtime_get_sync(hdev->dev);
+	else
+		ret = pm_runtime_put_sync(hdev->dev);
+	/* only values < 0 indicate errors */
+	return IS_ERR_VALUE(ret) ? ret : 0;
+}
+
+static int hdmi_s_dv_preset(struct v4l2_subdev *sd,
+	struct v4l2_dv_preset *preset)
+{
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+	struct device *dev = hdev->dev;
+	const struct hdmi_preset_conf *conf;
+
+	conf = hdmi_preset2conf(preset->preset);
+	if (conf == NULL) {
+		dev_err(dev, "preset (%u) not supported\n", preset->preset);
+		return -EINVAL;
+	}
+	hdev->cur_conf = conf;
+	hdev->cur_preset = preset->preset;
+	return 0;
+}
+
+static int hdmi_g_dv_preset(struct v4l2_subdev *sd,
+	struct v4l2_dv_preset *preset)
+{
+	memset(preset, 0, sizeof(*preset));
+	preset->preset = sd_to_hdmi_dev(sd)->cur_preset;
+	return 0;
+}
+
+static int hdmi_g_mbus_fmt(struct v4l2_subdev *sd,
+	  struct v4l2_mbus_framefmt *fmt)
+{
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+	struct device *dev = hdev->dev;
+
+	dev_dbg(dev, "%s\n", __func__);
+	if (!hdev->cur_conf)
+		return -EINVAL;
+	*fmt = hdev->cur_conf->mbus_fmt;
+	return 0;
+}
+
+static int hdmi_enum_dv_presets(struct v4l2_subdev *sd,
+	struct v4l2_dv_enum_preset *preset)
+{
+	if (preset->index >= ARRAY_SIZE(hdmi_conf))
+		return -EINVAL;
+	return v4l_fill_dv_preset_info(hdmi_conf[preset->index].preset, preset);
+}
+
+static const struct v4l2_subdev_core_ops hdmi_sd_core_ops = {
+	.s_power = hdmi_s_power,
+};
+
+static const struct v4l2_subdev_video_ops hdmi_sd_video_ops = {
+	.s_dv_preset = hdmi_s_dv_preset,
+	.g_dv_preset = hdmi_g_dv_preset,
+	.enum_dv_presets = hdmi_enum_dv_presets,
+	.g_mbus_fmt = hdmi_g_mbus_fmt,
+	.s_stream = hdmi_s_stream,
+};
+
+static const struct v4l2_subdev_ops hdmi_sd_ops = {
+	.core = &hdmi_sd_core_ops,
+	.video = &hdmi_sd_video_ops,
+};
+
+static int hdmi_runtime_suspend(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+
+	dev_dbg(dev, "%s\n", __func__);
+	hdmi_resource_poweroff(&hdev->res);
+	return 0;
+}
+
+static int hdmi_runtime_resume(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+	int ret = 0;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	hdmi_resource_poweron(&hdev->res);
+
+	ret = hdmi_conf_apply(hdev);
+	if (ret)
+		goto fail;
+
+	dev_dbg(dev, "poweron succeed\n");
+
+	return 0;
+
+fail:
+	hdmi_resource_poweroff(&hdev->res);
+	dev_err(dev, "poweron failed\n");
+
+	return ret;
+}
+
+static const struct dev_pm_ops hdmi_pm_ops = {
+	.runtime_suspend = hdmi_runtime_suspend,
+	.runtime_resume	 = hdmi_runtime_resume,
+};
+
+static void hdmi_resources_cleanup(struct hdmi_device *hdev)
+{
+	struct hdmi_resources *res = &hdev->res;
+
+	dev_dbg(hdev->dev, "HDMI resource cleanup\n");
+	/* put clocks, power */
+	if (res->regul_count)
+		regulator_bulk_free(res->regul_count, res->regul_bulk);
+	/* kfree is NULL-safe */
+	kfree(res->regul_bulk);
+	if (!IS_ERR_OR_NULL(res->hdmiphy))
+		clk_put(res->hdmiphy);
+	if (!IS_ERR_OR_NULL(res->sclk_hdmiphy))
+		clk_put(res->sclk_hdmiphy);
+	if (!IS_ERR_OR_NULL(res->sclk_pixel))
+		clk_put(res->sclk_pixel);
+	if (!IS_ERR_OR_NULL(res->sclk_hdmi))
+		clk_put(res->sclk_hdmi);
+	if (!IS_ERR_OR_NULL(res->hdmi))
+		clk_put(res->hdmi);
+	memset(res, 0, sizeof *res);
+}
+
+static int hdmi_resources_init(struct hdmi_device *hdev)
+{
+	struct device *dev = hdev->dev;
+	struct hdmi_resources *res = &hdev->res;
+	static char *supply[] = {
+		"hdmi-en",
+		"vdd",
+		"vdd_osc",
+		"vdd_pll",
+	};
+	int i, ret;
+
+	dev_dbg(dev, "HDMI resource init\n");
+
+	memset(res, 0, sizeof *res);
+	/* get clocks, power */
+
+	res->hdmi = clk_get(dev, "hdmi");
+	if (IS_ERR_OR_NULL(res->hdmi)) {
+		dev_err(dev, "failed to get clock 'hdmi'\n");
+		goto fail;
+	}
+	res->sclk_hdmi = clk_get(dev, "sclk_hdmi");
+	if (IS_ERR_OR_NULL(res->sclk_hdmi)) {
+		dev_err(dev, "failed to get clock 'sclk_hdmi'\n");
+		goto fail;
+	}
+	res->sclk_pixel = clk_get(dev, "sclk_pixel");
+	if (IS_ERR_OR_NULL(res->sclk_pixel)) {
+		dev_err(dev, "failed to get clock 'sclk_pixel'\n");
+		goto fail;
+	}
+	res->sclk_hdmiphy = clk_get(dev, "sclk_hdmiphy");
+	if (IS_ERR_OR_NULL(res->sclk_hdmiphy)) {
+		dev_err(dev, "failed to get clock 'sclk_hdmiphy'\n");
+		goto fail;
+	}
+	res->hdmiphy = clk_get(dev, "hdmiphy");
+	if (IS_ERR_OR_NULL(res->hdmiphy)) {
+		dev_err(dev, "failed to get clock 'hdmiphy'\n");
+		goto fail;
+	}
+	res->regul_bulk = kzalloc(ARRAY_SIZE(supply) *
+		sizeof res->regul_bulk[0], GFP_KERNEL);
+	if (!res->regul_bulk) {
+		dev_err(dev, "failed to get memory for regulators\n");
+		goto fail;
+	}
+	for (i = 0; i < ARRAY_SIZE(supply); ++i) {
+		res->regul_bulk[i].supply = supply[i];
+		res->regul_bulk[i].consumer = NULL;
+	}
+
+	ret = regulator_bulk_get(dev, ARRAY_SIZE(supply), res->regul_bulk);
+	if (ret) {
+		dev_err(dev, "failed to get regulators\n");
+		goto fail;
+	}
+	res->regul_count = ARRAY_SIZE(supply);
+
+	return 0;
+fail:
+	dev_err(dev, "HDMI resource init - failed\n");
+	hdmi_resources_cleanup(hdev);
+	return -ENODEV;
+}
+
+static int __devinit hdmi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct i2c_adapter *phy_adapter;
+	struct v4l2_subdev *sd;
+	struct hdmi_device *hdmi_dev = NULL;
+	struct hdmi_driver_data *drv_data;
+	int ret;
+
+	dev_dbg(dev, "probe start\n");
+
+	hdmi_dev = kzalloc(sizeof(*hdmi_dev), GFP_KERNEL);
+	if (!hdmi_dev) {
+		dev_err(dev, "out of memory\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	hdmi_dev->dev = dev;
+
+	ret = hdmi_resources_init(hdmi_dev);
+	if (ret)
+		goto fail_hdev;
+
+	/* mapping HDMI registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "get memory resource failed.\n");
+		ret = -ENXIO;
+		goto fail_init;
+	}
+
+	hdmi_dev->regs = ioremap(res->start, resource_size(res));
+	if (hdmi_dev->regs == NULL) {
+		dev_err(dev, "register mapping failed.\n");
+		ret = -ENXIO;
+		goto fail_hdev;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		dev_err(dev, "get interrupt resource failed.\n");
+		ret = -ENXIO;
+		goto fail_regs;
+	}
+
+	ret = request_irq(res->start, hdmi_irq_handler, 0, "hdmi", hdmi_dev);
+	if (ret) {
+		dev_err(dev, "request interrupt failed.\n");
+		goto fail_regs;
+	}
+	hdmi_dev->irq = res->start;
+
+	/* setting v4l2 name to prevent WARN_ON in v4l2_device_register */
+	strlcpy(hdmi_dev->v4l2_dev.name, dev_name(dev),
+		sizeof(hdmi_dev->v4l2_dev.name));
+	/* passing NULL owner prevents driver from erasing drvdata */
+	ret = v4l2_device_register(NULL, &hdmi_dev->v4l2_dev);
+	if (ret) {
+		dev_err(dev, "could not register v4l2 device.\n");
+		goto fail_irq;
+	}
+
+	drv_data = (struct hdmi_driver_data *)
+		platform_get_device_id(pdev)->driver_data;
+	phy_adapter = i2c_get_adapter(drv_data->hdmiphy_bus);
+	if (phy_adapter == NULL) {
+		dev_err(dev, "adapter request failed\n");
+		ret = -ENXIO;
+		goto fail_vdev;
+	}
+
+	hdmi_dev->phy_sd = v4l2_i2c_new_subdev_board(&hdmi_dev->v4l2_dev,
+		phy_adapter, &hdmiphy_info, NULL);
+	/* on failure or not adapter is no longer useful */
+	i2c_put_adapter(phy_adapter);
+	if (hdmi_dev->phy_sd == NULL) {
+		dev_err(dev, "missing subdev for hdmiphy\n");
+		ret = -ENODEV;
+		goto fail_vdev;
+	}
+
+	clk_enable(hdmi_dev->res.hdmi);
+
+	pm_runtime_enable(dev);
+
+	sd = &hdmi_dev->sd;
+	v4l2_subdev_init(sd, &hdmi_sd_ops);
+	sd->owner = THIS_MODULE;
+
+	strlcpy(sd->name, "s5p-hdmi", sizeof sd->name);
+	hdmi_dev->cur_preset = HDMI_DEFAULT_PRESET;
+	/* FIXME: missing fail preset is not supported */
+	hdmi_dev->cur_conf = hdmi_preset2conf(hdmi_dev->cur_preset);
+
+	/* storing subdev for call that have only access to struct device */
+	dev_set_drvdata(dev, sd);
+
+	dev_info(dev, "probe sucessful\n");
+
+	return 0;
+
+fail_vdev:
+	v4l2_device_unregister(&hdmi_dev->v4l2_dev);
+
+fail_irq:
+	free_irq(hdmi_dev->irq, hdmi_dev);
+
+fail_regs:
+	iounmap(hdmi_dev->regs);
+
+fail_init:
+	hdmi_resources_cleanup(hdmi_dev);
+
+fail_hdev:
+	kfree(hdmi_dev);
+
+fail:
+	dev_err(dev, "probe failed\n");
+	return ret;
+}
+
+static int __devexit hdmi_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct hdmi_device *hdmi_dev = sd_to_hdmi_dev(sd);
+
+	pm_runtime_disable(dev);
+	clk_disable(hdmi_dev->res.hdmi);
+	v4l2_device_unregister(&hdmi_dev->v4l2_dev);
+	disable_irq(hdmi_dev->irq);
+	free_irq(hdmi_dev->irq, hdmi_dev);
+	iounmap(hdmi_dev->regs);
+	hdmi_resources_cleanup(hdmi_dev);
+	kfree(hdmi_dev);
+	dev_info(dev, "remove sucessful\n");
+
+	return 0;
+}
+
+static struct platform_driver hdmi_driver __refdata = {
+	.probe = hdmi_probe,
+	.remove = __devexit_p(hdmi_remove),
+	.id_table = hdmi_driver_types,
+	.driver = {
+		.name = "s5p-hdmi",
+		.owner = THIS_MODULE,
+		.pm = &hdmi_pm_ops,
+	}
+};
+
+/* D R I V E R   I N I T I A L I Z A T I O N */
+
+static int __init hdmi_init(void)
+{
+	int ret;
+	static const char banner[] __initdata = KERN_INFO \
+		"Samsung HDMI output driver, "
+		"(c) 2010-2011 Samsung Electronics Co., Ltd.\n";
+	printk(banner);
+
+	ret = platform_driver_register(&hdmi_driver);
+	if (ret)
+		printk(KERN_ERR "HDMI platform driver register failed\n");
+
+	return ret;
+}
+module_init(hdmi_init);
+
+static void __exit hdmi_exit(void)
+{
+	platform_driver_unregister(&hdmi_driver);
+}
+module_exit(hdmi_exit);
+
+
diff --git a/drivers/media/video/s5p-tv/hdmiphy_drv.c b/drivers/media/video/s5p-tv/hdmiphy_drv.c
new file mode 100644
index 0000000..6693f4a
--- /dev/null
+++ b/drivers/media/video/s5p-tv/hdmiphy_drv.c
@@ -0,0 +1,188 @@
+/*
+ * Samsung HDMI Physical interface driver
+ *
+ * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
+ * Author: Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+
+#include <media/v4l2-subdev.h>
+
+MODULE_AUTHOR("Tomasz Stanislawski <t.stanislaws@samsung.com>");
+MODULE_DESCRIPTION("Samsung HDMI Physical interface driver");
+MODULE_LICENSE("GPL");
+
+struct hdmiphy_conf {
+	u32 preset;
+	const u8 *data;
+};
+
+static const u8 hdmiphy_conf27[32] = {
+	0x01, 0x05, 0x00, 0xD8, 0x10, 0x1C, 0x30, 0x40,
+	0x6B, 0x10, 0x02, 0x51, 0xDf, 0xF2, 0x54, 0x87,
+	0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0,
+	0x22, 0x40, 0xe3, 0x26, 0x00, 0x00, 0x00, 0x00,
+};
+
+static const u8 hdmiphy_conf74_175[32] = {
+	0x01, 0x05, 0x00, 0xD8, 0x10, 0x9C, 0xef, 0x5B,
+	0x6D, 0x10, 0x01, 0x51, 0xef, 0xF3, 0x54, 0xb9,
+	0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0,
+	0x22, 0x40, 0xa5, 0x26, 0x01, 0x00, 0x00, 0x00,
+};
+
+static const u8 hdmiphy_conf74_25[32] = {
+	0x01, 0x05, 0x00, 0xd8, 0x10, 0x9c, 0xf8, 0x40,
+	0x6a, 0x10, 0x01, 0x51, 0xff, 0xf1, 0x54, 0xba,
+	0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xe0,
+	0x22, 0x40, 0xa4, 0x26, 0x01, 0x00, 0x00, 0x00,
+};
+
+static const u8 hdmiphy_conf148_5[32] = {
+	0x01, 0x05, 0x00, 0xD8, 0x10, 0x9C, 0xf8, 0x40,
+	0x6A, 0x18, 0x00, 0x51, 0xff, 0xF1, 0x54, 0xba,
+	0x84, 0x00, 0x10, 0x38, 0x00, 0x08, 0x10, 0xE0,
+	0x22, 0x40, 0xa4, 0x26, 0x02, 0x00, 0x00, 0x00,
+};
+
+static const struct hdmiphy_conf hdmiphy_conf[] = {
+	{ V4L2_DV_480P59_94, hdmiphy_conf27 },
+	{ V4L2_DV_1080P30, hdmiphy_conf74_175 },
+	{ V4L2_DV_720P59_94, hdmiphy_conf74_175 },
+	{ V4L2_DV_720P60, hdmiphy_conf74_25 },
+	{ V4L2_DV_1080P50, hdmiphy_conf148_5 },
+	{ V4L2_DV_1080P60, hdmiphy_conf148_5 },
+};
+
+const u8 *hdmiphy_preset2conf(u32 preset)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(hdmiphy_conf); ++i)
+		if (hdmiphy_conf[i].preset == preset)
+			return hdmiphy_conf[i].data;
+	return NULL;
+}
+
+static int hdmiphy_s_power(struct v4l2_subdev *sd, int on)
+{
+	/* to be implemented */
+	return 0;
+}
+
+static int hdmiphy_s_dv_preset(struct v4l2_subdev *sd,
+	struct v4l2_dv_preset *preset)
+{
+	const u8 *data;
+	u8 buffer[32];
+	int ret;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct device *dev = &client->dev;
+
+	dev_info(dev, "s_dv_preset(preset = %d)\n", preset->preset);
+	data = hdmiphy_preset2conf(preset->preset);
+	if (!data) {
+		dev_err(dev, "format not supported\n");
+		return -EINVAL;
+	}
+
+	/* storing configuration to the device */
+	memcpy(buffer, data, 32);
+	ret = i2c_master_send(client, buffer, 32);
+	if (ret != 32) {
+		dev_err(dev, "failed to configure HDMIPHY via I2C\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int hdmiphy_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct device *dev = &client->dev;
+	u8 buffer[2];
+	int ret;
+
+	dev_info(dev, "s_stream(%d)\n", enable);
+	/* going to/from configuration from/to operation mode */
+	buffer[0] = 0x1f;
+	buffer[1] = enable ? 0x80 : 0x00;
+
+	ret = i2c_master_send(client, buffer, 2);
+	if (ret != 2) {
+		dev_err(dev, "stream (%d) failed\n", enable);
+		return -EIO;
+	}
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops hdmiphy_core_ops = {
+	.s_power =  hdmiphy_s_power,
+};
+
+static const struct v4l2_subdev_video_ops hdmiphy_video_ops = {
+	.s_dv_preset = hdmiphy_s_dv_preset,
+	.s_stream =  hdmiphy_s_stream,
+};
+
+static const struct v4l2_subdev_ops hdmiphy_ops = {
+	.core = &hdmiphy_core_ops,
+	.video = &hdmiphy_video_ops,
+};
+
+static int __devinit hdmiphy_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	static struct v4l2_subdev sd;
+
+	v4l2_i2c_subdev_init(&sd, client, &hdmiphy_ops);
+	dev_info(&client->dev, "probe successful\n");
+	return 0;
+}
+
+static int __devexit hdmiphy_remove(struct i2c_client *client)
+{
+	dev_info(&client->dev, "remove successful\n");
+	return 0;
+}
+
+static const struct i2c_device_id hdmiphy_id[] = {
+	{ "hdmiphy", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, hdmiphy_id);
+
+static struct i2c_driver hdmiphy_driver = {
+	.driver = {
+		.name	= "s5p-hdmiphy",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= hdmiphy_probe,
+	.remove		= __devexit_p(hdmiphy_remove),
+	.id_table = hdmiphy_id,
+};
+
+static int __init hdmiphy_init(void)
+{
+	return i2c_add_driver(&hdmiphy_driver);
+}
+module_init(hdmiphy_init);
+
+static void __exit hdmiphy_exit(void)
+{
+	i2c_del_driver(&hdmiphy_driver);
+}
+module_exit(hdmiphy_exit);
diff --git a/drivers/media/video/s5p-tv/mixer.h b/drivers/media/video/s5p-tv/mixer.h
new file mode 100644
index 0000000..e224224
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer.h
@@ -0,0 +1,354 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#ifndef SAMSUNG_MIXER_H
+#define SAMSUNG_MIXER_H
+
+#ifdef CONFIG_VIDEO_SAMSUNG_S5P_MIXER_DEBUG
+	#define DEBUG
+#endif
+
+#include <linux/fb.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf2-core.h>
+
+#include "regs-mixer.h"
+
+/** maximum number of output interfaces */
+#define MXR_MAX_OUTPUTS 2
+/** maximum number of input interfaces (layers) */
+#define MXR_MAX_LAYERS 3
+#define MXR_DRIVER_NAME "s5p-mixer"
+/** maximal number of planes for every layer */
+#define MXR_MAX_PLANES	2
+
+#define MXR_ENABLE 1
+#define MXR_DISABLE 0
+
+/** description of a macroblock for packed formats */
+struct mxr_block {
+	/** vertical number of pixels in macroblock */
+	unsigned int width;
+	/** horizontal number of pixels in macroblock */
+	unsigned int height;
+	/** size of block in bytes */
+	unsigned int size;
+};
+
+/** description of supported format */
+struct mxr_format {
+	/** format name/mnemonic */
+	const char *name;
+	/** fourcc identifier */
+	u32 fourcc;
+	/** colorspace identifier */
+	enum v4l2_colorspace colorspace;
+	/** number of planes in image data */
+	int num_planes;
+	/** description of block for each plane */
+	struct mxr_block plane[MXR_MAX_PLANES];
+	/** number of subframes in image data */
+	int num_subframes;
+	/** specifies to which subframe belong given plane */
+	int plane2subframe[MXR_MAX_PLANES];
+	/** internal code, driver dependant */
+	unsigned long cookie;
+};
+
+/** description of crop configuration for image */
+struct mxr_crop {
+	/** width of layer in pixels */
+	unsigned int full_width;
+	/** height of layer in pixels */
+	unsigned int full_height;
+	/** horizontal offset of first pixel to be displayed */
+	unsigned int x_offset;
+	/** vertical offset of first pixel to be displayed */
+	unsigned int y_offset;
+	/** width of displayed data in pixels */
+	unsigned int width;
+	/** height of displayed data in pixels */
+	unsigned int height;
+	/** indicate which fields are present in buffer */
+	unsigned int field;
+};
+
+/** description of transformation from source to destination image */
+struct mxr_geometry {
+	/** cropping for source image */
+	struct mxr_crop src;
+	/** cropping for destination image */
+	struct mxr_crop dst;
+	/** layer-dependant description of horizontal scaling */
+	unsigned int x_ratio;
+	/** layer-dependant description of vertical scaling */
+	unsigned int y_ratio;
+};
+
+/** instance of a buffer */
+struct mxr_buffer {
+	/** common v4l buffer stuff -- must be first */
+	struct vb2_buffer	vb;
+	/** node for layer's lists */
+	struct list_head	list;
+};
+
+
+/** internal states of layer */
+enum mxr_layer_state {
+	/** layers is not shown */
+	MXR_LAYER_IDLE = 0,
+	/** state between STREAMON and hardware start */
+	MXR_LAYER_STREAMING_START,
+	/** layer is shown */
+	MXR_LAYER_STREAMING,
+	/** state before STREAMOFF is finished */
+	MXR_LAYER_STREAMING_FINISH,
+};
+
+/** forward declarations */
+struct mxr_device;
+struct mxr_layer;
+
+/** callback for layers operation */
+struct mxr_layer_ops {
+	/* TODO: try to port it to subdev API */
+	/** handler for resource release function */
+	void (*release)(struct mxr_layer *);
+	/** setting buffer to HW */
+	void (*buffer_set)(struct mxr_layer *, struct mxr_buffer *);
+	/** setting format and geometry in HW */
+	void (*format_set)(struct mxr_layer *);
+	/** streaming stop/start */
+	void (*stream_set)(struct mxr_layer *, int);
+	/** adjusting geometry */
+	void (*fix_geometry)(struct mxr_layer *);
+};
+
+/** layer instance, a single window and content displayed on output */
+struct mxr_layer {
+	/** parent mixer device */
+	struct mxr_device *mdev;
+	/** layer index (unique identifier) */
+	int idx;
+	/** callbacks for layer methods */
+	struct mxr_layer_ops ops;
+	/** format array */
+	const struct mxr_format **fmt_array;
+	/** size of format array */
+	unsigned long fmt_array_size;
+
+	/** lock for protection of list and state fields */
+	spinlock_t enq_slock;
+	/** list for enqueued buffers */
+	struct list_head enq_list;
+	/** buffer currently owned by hardware in temporary registers */
+	struct mxr_buffer *update_buf;
+	/** buffer currently owned by hardware in shadow registers */
+	struct mxr_buffer *shadow_buf;
+	/** state of layer IDLE/STREAMING */
+	enum mxr_layer_state state;
+
+	/** mutex for protection of fields below */
+	struct mutex mutex;
+	/** handler for video node */
+	struct video_device vfd;
+	/** queue for output buffers */
+	struct vb2_queue vb_queue;
+	/** current image format */
+	const struct mxr_format *fmt;
+	/** current geometry of image */
+	struct mxr_geometry geo;
+};
+
+/** description of mixers output interface */
+struct mxr_output {
+	/** name of output */
+	char name[32];
+	/** output subdev */
+	struct v4l2_subdev *sd;
+	/** cookie used for configuration of registers */
+	int cookie;
+};
+
+/** specify source of output subdevs */
+struct mxr_output_conf {
+	/** name of output (connector) */
+	char *output_name;
+	/** name of module that generates output subdev */
+	char *module_name;
+	/** cookie need for mixer HW */
+	int cookie;
+};
+
+struct clk;
+struct regulator;
+
+/** auxiliary resources used my mixer */
+struct mxr_resources {
+	/** interrupt index */
+	int irq;
+	/** pointer to Mixer registers */
+	void __iomem *mxr_regs;
+	/** pointer to Video Processor registers */
+	void __iomem *vp_regs;
+	/** other resources, should used under mxr_device.mutex */
+	struct clk *mixer;
+	struct clk *vp;
+	struct clk *sclk_mixer;
+	struct clk *sclk_hdmi;
+	struct clk *sclk_dac;
+};
+
+/* event flags used  */
+enum mxr_devide_flags {
+	MXR_EVENT_VSYNC = 0,
+};
+
+/** drivers instance */
+struct mxr_device {
+	/** master device */
+	struct device *dev;
+	/** state of each layer */
+	struct mxr_layer *layer[MXR_MAX_LAYERS];
+	/** state of each output */
+	struct mxr_output *output[MXR_MAX_OUTPUTS];
+	/** number of registered outputs */
+	int output_cnt;
+
+	/* video resources */
+
+	/** V4L2 device */
+	struct v4l2_device v4l2_dev;
+	/** context of allocator */
+	void *alloc_ctx;
+	/** event wait queue */
+	wait_queue_head_t event_queue;
+	/** state flags */
+	unsigned long event_flags;
+
+	/** spinlock for protection of registers */
+	spinlock_t reg_slock;
+
+	/** mutex for protection of fields below */
+	struct mutex mutex;
+	/** number of entities depndant on output configuration */
+	int n_output;
+	/** number of users that do streaming */
+	int n_streamer;
+	/** index of current output */
+	int current_output;
+	/** auxiliary resources used my mixer */
+	struct mxr_resources res;
+};
+
+/** transform device structure into mixer device */
+static inline struct mxr_device *to_mdev(struct device *dev)
+{
+	struct v4l2_device *vdev = dev_get_drvdata(dev);
+	return container_of(vdev, struct mxr_device, v4l2_dev);
+}
+
+/** get current output data, should be called under mdev's mutex */
+static inline struct mxr_output *to_output(struct mxr_device *mdev)
+{
+	return mdev->output[mdev->current_output];
+}
+
+/** get current output subdev, should be called under mdev's mutex */
+static inline struct v4l2_subdev *to_outsd(struct mxr_device *mdev)
+{
+	struct mxr_output *out = to_output(mdev);
+	return out ? out->sd : NULL;
+}
+
+/** forward declaration for mixer platform data */
+struct mxr_platform_data;
+
+/** acquiring common video resources */
+int __devinit mxr_acquire_video(struct mxr_device *mdev,
+	struct mxr_output_conf *output_cont, int output_count);
+
+/** releasing common video resources */
+void __devexit mxr_release_video(struct mxr_device *mdev);
+
+struct mxr_layer *mxr_graph_layer_create(struct mxr_device *mdev, int idx);
+struct mxr_layer *mxr_vp_layer_create(struct mxr_device *mdev, int idx);
+struct mxr_layer *mxr_base_layer_create(struct mxr_device *mdev,
+	int idx, char *name, struct mxr_layer_ops *ops);
+
+void mxr_base_layer_release(struct mxr_layer *layer);
+void mxr_layer_release(struct mxr_layer *layer);
+
+int mxr_base_layer_register(struct mxr_layer *layer);
+void mxr_base_layer_unregister(struct mxr_layer *layer);
+
+unsigned long mxr_get_plane_size(const struct mxr_block *blk,
+	unsigned int width, unsigned int height);
+
+/** adds new consumer for mixer's power */
+int __must_check mxr_power_get(struct mxr_device *mdev);
+/** removes consumer for mixer's power */
+void mxr_power_put(struct mxr_device *mdev);
+/** add new client for output configuration */
+void mxr_output_get(struct mxr_device *mdev);
+/** removes new client for output configuration */
+void mxr_output_put(struct mxr_device *mdev);
+/** add new client for streaming */
+void mxr_streamer_get(struct mxr_device *mdev);
+/** removes new client for streaming */
+void mxr_streamer_put(struct mxr_device *mdev);
+/** returns format of data delivared to current output */
+void mxr_get_mbus_fmt(struct mxr_device *mdev,
+	struct v4l2_mbus_framefmt *mbus_fmt);
+
+/* Debug */
+
+#define mxr_err(mdev, fmt, ...)  dev_err(mdev->dev, fmt, ##__VA_ARGS__)
+#define mxr_warn(mdev, fmt, ...) dev_warn(mdev->dev, fmt, ##__VA_ARGS__)
+#define mxr_info(mdev, fmt, ...) dev_info(mdev->dev, fmt, ##__VA_ARGS__)
+
+#ifdef CONFIG_VIDEO_SAMSUNG_S5P_MIXER_DEBUG
+	#define mxr_dbg(mdev, fmt, ...)  dev_dbg(mdev->dev, fmt, ##__VA_ARGS__)
+#else
+	#define mxr_dbg(mdev, fmt, ...)  do { (void) mdev; } while (0)
+#endif
+
+/* accessing Mixer's and Video Processor's registers */
+
+void mxr_vsync_set_update(struct mxr_device *mdev, int en);
+void mxr_reg_reset(struct mxr_device *mdev);
+irqreturn_t mxr_irq_handler(int irq, void *dev_data);
+void mxr_reg_s_output(struct mxr_device *mdev, int cookie);
+void mxr_reg_streamon(struct mxr_device *mdev);
+void mxr_reg_streamoff(struct mxr_device *mdev);
+int mxr_reg_wait4vsync(struct mxr_device *mdev);
+void mxr_reg_set_mbus_fmt(struct mxr_device *mdev,
+	struct v4l2_mbus_framefmt *fmt);
+void mxr_reg_graph_layer_stream(struct mxr_device *mdev, int idx, int en);
+void mxr_reg_graph_buffer(struct mxr_device *mdev, int idx, dma_addr_t addr);
+void mxr_reg_graph_format(struct mxr_device *mdev, int idx,
+	const struct mxr_format *fmt, const struct mxr_geometry *geo);
+
+void mxr_reg_vp_layer_stream(struct mxr_device *mdev, int en);
+void mxr_reg_vp_buffer(struct mxr_device *mdev,
+	dma_addr_t luma_addr[2], dma_addr_t chroma_addr[2]);
+void mxr_reg_vp_format(struct mxr_device *mdev,
+	const struct mxr_format *fmt, const struct mxr_geometry *geo);
+void mxr_reg_dump(struct mxr_device *mdev);
+
+#endif /* SAMSUNG_MIXER_H */
+
diff --git a/drivers/media/video/s5p-tv/mixer_drv.c b/drivers/media/video/s5p-tv/mixer_drv.c
new file mode 100644
index 0000000..0064309
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer_drv.c
@@ -0,0 +1,487 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include "mixer.h"
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+
+MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>");
+MODULE_DESCRIPTION("Samsung MIXER");
+MODULE_LICENSE("GPL");
+
+/* --------- DRIVER PARAMETERS ---------- */
+
+static struct mxr_output_conf mxr_output_conf[] = {
+	{
+		.output_name = "S5P HDMI connector",
+		.module_name = "s5p-hdmi",
+		.cookie = 1,
+	},
+	{
+		.output_name = "S5P SDO connector",
+		.module_name = "s5p-sdo",
+		.cookie = 0,
+	},
+};
+
+void mxr_get_mbus_fmt(struct mxr_device *mdev,
+	struct v4l2_mbus_framefmt *mbus_fmt)
+{
+	struct v4l2_subdev *sd;
+	int ret;
+
+	mutex_lock(&mdev->mutex);
+	sd = to_outsd(mdev);
+	ret = v4l2_subdev_call(sd, video, g_mbus_fmt, mbus_fmt);
+	WARN(ret, "failed to get mbus_fmt for output %s\n", sd->name);
+	mutex_unlock(&mdev->mutex);
+}
+
+void mxr_streamer_get(struct mxr_device *mdev)
+{
+	mutex_lock(&mdev->mutex);
+	++mdev->n_streamer;
+	mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_streamer);
+	if (mdev->n_streamer == 1) {
+		struct v4l2_subdev *sd = to_outsd(mdev);
+		struct v4l2_mbus_framefmt mbus_fmt;
+		struct mxr_resources *res = &mdev->res;
+		int ret;
+
+		if (to_output(mdev)->cookie == 0)
+			clk_set_parent(res->sclk_mixer, res->sclk_dac);
+		else
+			clk_set_parent(res->sclk_mixer, res->sclk_hdmi);
+		mxr_reg_s_output(mdev, to_output(mdev)->cookie);
+
+		ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mbus_fmt);
+		WARN(ret, "failed to get mbus_fmt for output %s\n", sd->name);
+		ret = v4l2_subdev_call(sd, video, s_stream, 1);
+		WARN(ret, "starting stream failed for output %s\n", sd->name);
+
+		mxr_reg_set_mbus_fmt(mdev, &mbus_fmt);
+		mxr_reg_streamon(mdev);
+		ret = mxr_reg_wait4vsync(mdev);
+		WARN(ret, "failed to get vsync (%d) from output\n", ret);
+	}
+	mutex_unlock(&mdev->mutex);
+	mxr_reg_dump(mdev);
+	/* FIXME: what to do when streaming fails? */
+}
+
+void mxr_streamer_put(struct mxr_device *mdev)
+{
+	mutex_lock(&mdev->mutex);
+	--mdev->n_streamer;
+	mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_streamer);
+	if (mdev->n_streamer == 0) {
+		int ret;
+		struct v4l2_subdev *sd = to_outsd(mdev);
+
+		mxr_reg_streamoff(mdev);
+		/* vsync applies Mixer setup */
+		ret = mxr_reg_wait4vsync(mdev);
+		WARN(ret, "failed to get vsync (%d) from output\n", ret);
+		ret = v4l2_subdev_call(sd, video, s_stream, 0);
+		WARN(ret, "stopping stream failed for output %s\n", sd->name);
+	}
+	WARN(mdev->n_streamer < 0, "negative number of streamers (%d)\n",
+		mdev->n_streamer);
+	mutex_unlock(&mdev->mutex);
+	mxr_reg_dump(mdev);
+}
+
+void mxr_output_get(struct mxr_device *mdev)
+{
+	mutex_lock(&mdev->mutex);
+	++mdev->n_output;
+	mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_output);
+	/* turn on auxiliary driver */
+	if (mdev->n_output == 1)
+		v4l2_subdev_call(to_outsd(mdev), core, s_power, 1);
+	mutex_unlock(&mdev->mutex);
+}
+
+void mxr_output_put(struct mxr_device *mdev)
+{
+	mutex_lock(&mdev->mutex);
+	--mdev->n_output;
+	mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_output);
+	/* turn on auxiliary driver */
+	if (mdev->n_output == 0)
+		v4l2_subdev_call(to_outsd(mdev), core, s_power, 0);
+	WARN(mdev->n_output < 0, "negative number of output users (%d)\n",
+		mdev->n_output);
+	mutex_unlock(&mdev->mutex);
+}
+
+int mxr_power_get(struct mxr_device *mdev)
+{
+	int ret = pm_runtime_get_sync(mdev->dev);
+
+	/* returning 1 means that power is already enabled,
+	 * so zero success be returned */
+	if (IS_ERR_VALUE(ret))
+		return ret;
+	return 0;
+}
+
+void mxr_power_put(struct mxr_device *mdev)
+{
+	pm_runtime_put_sync(mdev->dev);
+}
+
+/* --------- RESOURCE MANAGEMENT -------------*/
+
+static int __devinit mxr_acquire_plat_resources(struct mxr_device *mdev,
+	struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mxr");
+	if (res == NULL) {
+		mxr_err(mdev, "get memory resource failed.\n");
+		ret = -ENXIO;
+		goto fail;
+	}
+
+	mdev->res.mxr_regs = ioremap(res->start, resource_size(res));
+	if (mdev->res.mxr_regs == NULL) {
+		mxr_err(mdev, "register mapping failed.\n");
+		ret = -ENXIO;
+		goto fail;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vp");
+	if (res == NULL) {
+		mxr_err(mdev, "get memory resource failed.\n");
+		ret = -ENXIO;
+		goto fail_mxr_regs;
+	}
+
+	mdev->res.vp_regs = ioremap(res->start, resource_size(res));
+	if (mdev->res.vp_regs == NULL) {
+		mxr_err(mdev, "register mapping failed.\n");
+		ret = -ENXIO;
+		goto fail_mxr_regs;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "irq");
+	if (res == NULL) {
+		mxr_err(mdev, "get interrupt resource failed.\n");
+		ret = -ENXIO;
+		goto fail_vp_regs;
+	}
+
+	ret = request_irq(res->start, mxr_irq_handler, 0, "s5p-mixer", mdev);
+	if (ret) {
+		mxr_err(mdev, "request interrupt failed.\n");
+		goto fail_vp_regs;
+	}
+	mdev->res.irq = res->start;
+
+	return 0;
+
+fail_vp_regs:
+	iounmap(mdev->res.vp_regs);
+
+fail_mxr_regs:
+	iounmap(mdev->res.mxr_regs);
+
+fail:
+	return ret;
+}
+
+static void mxr_release_plat_resources(struct mxr_device *mdev)
+{
+	free_irq(mdev->res.irq, mdev);
+	iounmap(mdev->res.vp_regs);
+	iounmap(mdev->res.mxr_regs);
+}
+
+static void mxr_release_clocks(struct mxr_device *mdev)
+{
+	struct mxr_resources *res = &mdev->res;
+
+	if (!IS_ERR_OR_NULL(res->sclk_dac))
+		clk_put(res->sclk_dac);
+	if (!IS_ERR_OR_NULL(res->sclk_hdmi))
+		clk_put(res->sclk_hdmi);
+	if (!IS_ERR_OR_NULL(res->sclk_mixer))
+		clk_put(res->sclk_mixer);
+	if (!IS_ERR_OR_NULL(res->vp))
+		clk_put(res->vp);
+	if (!IS_ERR_OR_NULL(res->mixer))
+		clk_put(res->mixer);
+}
+
+static int mxr_acquire_clocks(struct mxr_device *mdev)
+{
+	struct mxr_resources *res = &mdev->res;
+	struct device *dev = mdev->dev;
+
+	res->mixer = clk_get(dev, "mixer");
+	if (IS_ERR_OR_NULL(res->mixer)) {
+		mxr_err(mdev, "failed to get clock 'mixer'\n");
+		goto fail;
+	}
+	res->vp = clk_get(dev, "vp");
+	if (IS_ERR_OR_NULL(res->vp)) {
+		mxr_err(mdev, "failed to get clock 'vp'\n");
+		goto fail;
+	}
+	res->sclk_mixer = clk_get(dev, "sclk_mixer");
+	if (IS_ERR_OR_NULL(res->sclk_mixer)) {
+		mxr_err(mdev, "failed to get clock 'sclk_mixer'\n");
+		goto fail;
+	}
+	res->sclk_hdmi = clk_get(dev, "sclk_hdmi");
+	if (IS_ERR_OR_NULL(res->sclk_hdmi)) {
+		mxr_err(mdev, "failed to get clock 'sclk_hdmi'\n");
+		goto fail;
+	}
+	res->sclk_dac = clk_get(dev, "sclk_dac");
+	if (IS_ERR_OR_NULL(res->sclk_dac)) {
+		mxr_err(mdev, "failed to get clock 'sclk_dac'\n");
+		goto fail;
+	}
+
+	return 0;
+fail:
+	mxr_release_clocks(mdev);
+	return -ENODEV;
+}
+
+static int __devinit mxr_acquire_resources(struct mxr_device *mdev,
+	struct platform_device *pdev)
+{
+	int ret;
+	ret = mxr_acquire_plat_resources(mdev, pdev);
+
+	if (ret)
+		goto fail;
+
+	ret = mxr_acquire_clocks(mdev);
+	if (ret)
+		goto fail_plat;
+
+	mxr_info(mdev, "resources acquired\n");
+	return 0;
+
+fail_plat:
+	mxr_release_plat_resources(mdev);
+fail:
+	mxr_err(mdev, "resources acquire failed\n");
+	return ret;
+}
+
+static void mxr_release_resources(struct mxr_device *mdev)
+{
+	mxr_release_clocks(mdev);
+	mxr_release_plat_resources(mdev);
+	memset(&mdev->res, 0, sizeof mdev->res);
+}
+
+static void mxr_release_layers(struct mxr_device *mdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mdev->layer); ++i)
+		if (mdev->layer[i])
+			mxr_layer_release(mdev->layer[i]);
+}
+
+static int __devinit mxr_acquire_layers(struct mxr_device *mdev,
+	struct mxr_platform_data *pdata)
+{
+	mdev->layer[0] = mxr_graph_layer_create(mdev, 0);
+	mdev->layer[1] = mxr_graph_layer_create(mdev, 1);
+	mdev->layer[2] = mxr_vp_layer_create(mdev, 0);
+
+	if (!mdev->layer[0] || !mdev->layer[1] || !mdev->layer[2]) {
+		mxr_err(mdev, "failed to acquire layers\n");
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	mxr_release_layers(mdev);
+	return -ENODEV;
+}
+
+/* ---------- POWER MANAGEMENT ----------- */
+
+static int mxr_runtime_resume(struct device *dev)
+{
+	struct mxr_device *mdev = to_mdev(dev);
+	struct mxr_resources *res = &mdev->res;
+
+	mxr_dbg(mdev, "resume - start\n");
+	mutex_lock(&mdev->mutex);
+	/* turn clocks on */
+	clk_enable(res->mixer);
+	clk_enable(res->vp);
+	clk_enable(res->sclk_mixer);
+	/* apply default configuration */
+	mxr_reg_reset(mdev);
+	mxr_dbg(mdev, "resume - finished\n");
+
+	mutex_unlock(&mdev->mutex);
+	return 0;
+}
+
+static int mxr_runtime_suspend(struct device *dev)
+{
+	struct mxr_device *mdev = to_mdev(dev);
+	struct mxr_resources *res = &mdev->res;
+	mxr_dbg(mdev, "suspend - start\n");
+	mutex_lock(&mdev->mutex);
+	/* turn clocks off */
+	clk_disable(res->sclk_mixer);
+	clk_disable(res->vp);
+	clk_disable(res->mixer);
+	mutex_unlock(&mdev->mutex);
+	mxr_dbg(mdev, "suspend - finished\n");
+	return 0;
+}
+
+static const struct dev_pm_ops mxr_pm_ops = {
+	.runtime_suspend = mxr_runtime_suspend,
+	.runtime_resume	 = mxr_runtime_resume,
+};
+
+/* --------- DRIVER INITIALIZATION ---------- */
+
+static int __devinit mxr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mxr_platform_data *pdata = dev->platform_data;
+	struct mxr_device *mdev;
+	int ret;
+
+	/* mdev does not exist yet so no mxr_dbg is used */
+	dev_info(dev, "probe start\n");
+
+	mdev = kzalloc(sizeof *mdev, GFP_KERNEL);
+	if (!mdev) {
+		mxr_err(mdev, "not enough memory.\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	/* setup pointer to master device */
+	mdev->dev = dev;
+
+	mutex_init(&mdev->mutex);
+	spin_lock_init(&mdev->reg_slock);
+	init_waitqueue_head(&mdev->event_queue);
+
+	/* acquire resources: regs, irqs, clocks, regulators */
+	ret = mxr_acquire_resources(mdev, pdev);
+	if (ret)
+		goto fail_mem;
+
+	/* configure resources for video output */
+	ret = mxr_acquire_video(mdev, mxr_output_conf,
+		ARRAY_SIZE(mxr_output_conf));
+	if (ret)
+		goto fail_resources;
+
+	/* configure layers */
+	ret = mxr_acquire_layers(mdev, pdata);
+	if (ret)
+		goto fail_video;
+
+	pm_runtime_enable(dev);
+
+	mxr_info(mdev, "probe successful\n");
+	return 0;
+
+fail_video:
+	mxr_release_video(mdev);
+
+fail_resources:
+	mxr_release_resources(mdev);
+
+fail_mem:
+	kfree(mdev);
+
+fail:
+	dev_info(dev, "probe failed\n");
+	return ret;
+}
+
+static int __devexit mxr_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mxr_device *mdev = to_mdev(dev);
+
+	pm_runtime_disable(dev);
+
+	mxr_release_layers(mdev);
+	mxr_release_video(mdev);
+	mxr_release_resources(mdev);
+
+	kfree(mdev);
+
+	dev_info(dev, "remove sucessful\n");
+	return 0;
+}
+
+static struct platform_driver mxr_driver __refdata = {
+	.probe = mxr_probe,
+	.remove = __devexit_p(mxr_remove),
+	.driver = {
+		.name = MXR_DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.pm = &mxr_pm_ops,
+	}
+};
+
+static int __init mxr_init(void)
+{
+	int i, ret;
+	static const char banner[] __initdata = KERN_INFO
+		"Samsung TV Mixer driver, "
+		"(c) 2010-2011 Samsung Electronics Co., Ltd.\n";
+	printk(banner);
+
+	/* Loading auxiliary modules */
+	for (i = 0; i < ARRAY_SIZE(mxr_output_conf); ++i)
+		request_module(mxr_output_conf[i].module_name);
+
+	ret = platform_driver_register(&mxr_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "registration of MIXER driver failed\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+module_init(mxr_init);
+
+static void __exit mxr_exit(void)
+{
+	platform_driver_unregister(&mxr_driver);
+}
+module_exit(mxr_exit);
diff --git a/drivers/media/video/s5p-tv/mixer_grp_layer.c b/drivers/media/video/s5p-tv/mixer_grp_layer.c
new file mode 100644
index 0000000..58f0ba4
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer_grp_layer.c
@@ -0,0 +1,185 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include "mixer.h"
+
+#include <media/videobuf2-dma-contig.h>
+
+/* FORMAT DEFINITIONS */
+
+static const struct mxr_format mxr_fb_fmt_rgb565 = {
+	.name = "RGB565",
+	.fourcc = V4L2_PIX_FMT_RGB565,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+	.num_planes = 1,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 2 },
+	},
+	.num_subframes = 1,
+	.cookie = 4,
+};
+
+static const struct mxr_format mxr_fb_fmt_argb1555 = {
+	.name = "ARGB1555",
+	.num_planes = 1,
+	.fourcc = V4L2_PIX_FMT_RGB555,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 2 },
+	},
+	.num_subframes = 1,
+	.cookie = 5,
+};
+
+static const struct mxr_format mxr_fb_fmt_argb4444 = {
+	.name = "ARGB4444",
+	.num_planes = 1,
+	.fourcc = V4L2_PIX_FMT_RGB444,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 2 },
+	},
+	.num_subframes = 1,
+	.cookie = 6,
+};
+
+static const struct mxr_format mxr_fb_fmt_argb8888 = {
+	.name = "ARGB8888",
+	.fourcc = V4L2_PIX_FMT_BGR32,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+	.num_planes = 1,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 4 },
+	},
+	.num_subframes = 1,
+	.cookie = 7,
+};
+
+static const struct mxr_format *mxr_graph_format[] = {
+	&mxr_fb_fmt_rgb565,
+	&mxr_fb_fmt_argb1555,
+	&mxr_fb_fmt_argb4444,
+	&mxr_fb_fmt_argb8888,
+};
+
+/* AUXILIARY CALLBACKS */
+
+static void mxr_graph_layer_release(struct mxr_layer *layer)
+{
+	mxr_base_layer_unregister(layer);
+	mxr_base_layer_release(layer);
+}
+
+static void mxr_graph_buffer_set(struct mxr_layer *layer,
+	struct mxr_buffer *buf)
+{
+	dma_addr_t addr = 0;
+
+	if (buf)
+		addr = vb2_dma_contig_plane_paddr(&buf->vb, 0);
+	mxr_reg_graph_buffer(layer->mdev, layer->idx, addr);
+}
+
+static void mxr_graph_stream_set(struct mxr_layer *layer, int en)
+{
+	mxr_reg_graph_layer_stream(layer->mdev, layer->idx, en);
+}
+
+static void mxr_graph_format_set(struct mxr_layer *layer)
+{
+	mxr_reg_graph_format(layer->mdev, layer->idx,
+		layer->fmt, &layer->geo);
+}
+
+static void mxr_graph_fix_geometry(struct mxr_layer *layer)
+{
+	struct mxr_geometry *geo = &layer->geo;
+
+	/* limit to boundary size */
+	geo->src.full_width = clamp_val(geo->src.full_width, 1, 32767);
+	geo->src.full_height = clamp_val(geo->src.full_height, 1, 2047);
+	geo->src.width = clamp_val(geo->src.width, 1, geo->src.full_width);
+	geo->src.width = min(geo->src.width, 2047U);
+	/* not possible to crop of Y axis */
+	geo->src.y_offset = min(geo->src.y_offset, geo->src.full_height - 1);
+	geo->src.height = geo->src.full_height - geo->src.y_offset;
+	/* limitting offset */
+	geo->src.x_offset = min(geo->src.x_offset,
+		geo->src.full_width - geo->src.width);
+
+	/* setting position in output */
+	geo->dst.width = min(geo->dst.width, geo->dst.full_width);
+	geo->dst.height = min(geo->dst.height, geo->dst.full_height);
+
+	/* Mixer supports only 1x and 2x scaling */
+	if (geo->dst.width >= 2 * geo->src.width) {
+		geo->x_ratio = 1;
+		geo->dst.width = 2 * geo->src.width;
+	} else {
+		geo->x_ratio = 0;
+		geo->dst.width = geo->src.width;
+	}
+
+	if (geo->dst.height >= 2 * geo->src.height) {
+		geo->y_ratio = 1;
+		geo->dst.height = 2 * geo->src.height;
+	} else {
+		geo->y_ratio = 0;
+		geo->dst.height = geo->src.height;
+	}
+
+	geo->dst.x_offset = min(geo->dst.x_offset,
+		geo->dst.full_width - geo->dst.width);
+	geo->dst.y_offset = min(geo->dst.y_offset,
+		geo->dst.full_height - geo->dst.height);
+}
+
+/* PUBLIC API */
+
+struct mxr_layer *mxr_graph_layer_create(struct mxr_device *mdev, int idx)
+{
+	struct mxr_layer *layer;
+	int ret;
+	struct mxr_layer_ops ops = {
+		.release = mxr_graph_layer_release,
+		.buffer_set = mxr_graph_buffer_set,
+		.stream_set = mxr_graph_stream_set,
+		.format_set = mxr_graph_format_set,
+		.fix_geometry = mxr_graph_fix_geometry,
+	};
+	char name[32];
+
+	sprintf(name, "graph%d", idx);
+
+	layer = mxr_base_layer_create(mdev, idx, name, &ops);
+	if (layer == NULL) {
+		mxr_err(mdev, "failed to initialize layer(%d) base\n", idx);
+		goto fail;
+	}
+
+	layer->fmt_array = mxr_graph_format;
+	layer->fmt_array_size = ARRAY_SIZE(mxr_graph_format);
+
+	ret = mxr_base_layer_register(layer);
+	if (ret)
+		goto fail_layer;
+
+	return layer;
+
+fail_layer:
+	mxr_base_layer_release(layer);
+
+fail:
+	return NULL;
+}
+
diff --git a/drivers/media/video/s5p-tv/mixer_reg.c b/drivers/media/video/s5p-tv/mixer_reg.c
new file mode 100644
index 0000000..38dac67
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer_reg.c
@@ -0,0 +1,541 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include "mixer.h"
+#include "regs-mixer.h"
+#include "regs-vp.h"
+
+#include <linux/delay.h>
+
+/* Register access subroutines */
+
+static inline u32 vp_read(struct mxr_device *mdev, u32 reg_id)
+{
+	return readl(mdev->res.vp_regs + reg_id);
+}
+
+static inline void vp_write(struct mxr_device *mdev, u32 reg_id, u32 val)
+{
+	writel(val, mdev->res.vp_regs + reg_id);
+}
+
+static inline void vp_write_mask(struct mxr_device *mdev, u32 reg_id,
+	u32 val, u32 mask)
+{
+	u32 old = vp_read(mdev, reg_id);
+
+	val = (val & mask) | (old & ~mask);
+	writel(val, mdev->res.vp_regs + reg_id);
+}
+
+static inline u32 mxr_read(struct mxr_device *mdev, u32 reg_id)
+{
+	return readl(mdev->res.mxr_regs + reg_id);
+}
+
+static inline void mxr_write(struct mxr_device *mdev, u32 reg_id, u32 val)
+{
+	writel(val, mdev->res.mxr_regs + reg_id);
+}
+
+static inline void mxr_write_mask(struct mxr_device *mdev, u32 reg_id,
+	u32 val, u32 mask)
+{
+	u32 old = mxr_read(mdev, reg_id);
+
+	val = (val & mask) | (old & ~mask);
+	writel(val, mdev->res.mxr_regs + reg_id);
+}
+
+void mxr_vsync_set_update(struct mxr_device *mdev, int en)
+{
+	/* block update on vsync */
+	mxr_write_mask(mdev, MXR_STATUS, en ? MXR_STATUS_SYNC_ENABLE : 0,
+		MXR_STATUS_SYNC_ENABLE);
+	vp_write(mdev, VP_SHADOW_UPDATE, en ? VP_SHADOW_UPDATE_ENABLE : 0);
+}
+
+static void __mxr_reg_vp_reset(struct mxr_device *mdev)
+{
+	int tries = 100;
+
+	vp_write(mdev, VP_SRESET, VP_SRESET_PROCESSING);
+	for (tries = 100; tries; --tries) {
+		/* waiting until VP_SRESET_PROCESSING is 0 */
+		if (~vp_read(mdev, VP_SRESET) & VP_SRESET_PROCESSING)
+			break;
+		mdelay(10);
+	}
+	WARN(tries == 0, "failed to reset Video Processor\n");
+}
+
+static void mxr_reg_vp_default_filter(struct mxr_device *mdev);
+
+void mxr_reg_reset(struct mxr_device *mdev)
+{
+	unsigned long flags;
+	u32 val; /* value stored to register */
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	/* set output in RGB888 mode */
+	mxr_write(mdev, MXR_CFG, MXR_CFG_OUT_YUV444);
+
+	/* 16 beat burst in DMA */
+	mxr_write_mask(mdev, MXR_STATUS, MXR_STATUS_16_BURST,
+		MXR_STATUS_BURST_MASK);
+
+	/* setting default layer priority: layer1 > video > layer0
+	 * because typical usage scenario would be
+	 * layer0 - framebuffer
+	 * video - video overlay
+	 * layer1 - OSD
+	 */
+	val  = MXR_LAYER_CFG_GRP0_VAL(1);
+	val |= MXR_LAYER_CFG_VP_VAL(2);
+	val |= MXR_LAYER_CFG_GRP1_VAL(3);
+	mxr_write(mdev, MXR_LAYER_CFG, val);
+
+	/* use dark gray background color */
+	mxr_write(mdev, MXR_BG_COLOR0, 0x808080);
+	mxr_write(mdev, MXR_BG_COLOR1, 0x808080);
+	mxr_write(mdev, MXR_BG_COLOR2, 0x808080);
+
+	/* setting graphical layers */
+
+	val  = MXR_GRP_CFG_COLOR_KEY_DISABLE; /* no blank key */
+	val |= MXR_GRP_CFG_BLEND_PRE_MUL; /* premul mode */
+	val |= MXR_GRP_CFG_ALPHA_VAL(0xff); /* non-transparent alpha */
+
+	/* the same configuration for both layers */
+	mxr_write(mdev, MXR_GRAPHIC_CFG(0), val);
+	mxr_write(mdev, MXR_GRAPHIC_CFG(1), val);
+
+	/* configuration of Video Processor Registers */
+	__mxr_reg_vp_reset(mdev);
+	mxr_reg_vp_default_filter(mdev);
+
+	/* enable all interrupts */
+	mxr_write_mask(mdev, MXR_INT_EN, ~0, MXR_INT_EN_ALL);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+void mxr_reg_graph_format(struct mxr_device *mdev, int idx,
+	const struct mxr_format *fmt, const struct mxr_geometry *geo)
+{
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	/* setup format */
+	mxr_write_mask(mdev, MXR_GRAPHIC_CFG(idx),
+		MXR_GRP_CFG_FORMAT_VAL(fmt->cookie), MXR_GRP_CFG_FORMAT_MASK);
+
+	/* setup geometry */
+	mxr_write(mdev, MXR_GRAPHIC_SPAN(idx), geo->src.full_width);
+	val  = MXR_GRP_WH_WIDTH(geo->src.width);
+	val |= MXR_GRP_WH_HEIGHT(geo->src.height);
+	val |= MXR_GRP_WH_H_SCALE(geo->x_ratio);
+	val |= MXR_GRP_WH_V_SCALE(geo->y_ratio);
+	mxr_write(mdev, MXR_GRAPHIC_WH(idx), val);
+
+	/* setup offsets in source image */
+	val  = MXR_GRP_SXY_SX(geo->src.x_offset);
+	val |= MXR_GRP_SXY_SY(geo->src.y_offset);
+	mxr_write(mdev, MXR_GRAPHIC_SXY(idx), val);
+
+	/* setup offsets in display image */
+	val  = MXR_GRP_DXY_DX(geo->dst.x_offset);
+	val |= MXR_GRP_DXY_DY(geo->dst.y_offset);
+	mxr_write(mdev, MXR_GRAPHIC_DXY(idx), val);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+void mxr_reg_vp_format(struct mxr_device *mdev,
+	const struct mxr_format *fmt, const struct mxr_geometry *geo)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	vp_write_mask(mdev, VP_MODE, fmt->cookie, VP_MODE_FMT_MASK);
+
+	/* setting size of input image */
+	vp_write(mdev, VP_IMG_SIZE_Y, VP_IMG_HSIZE(geo->src.full_width) |
+		VP_IMG_VSIZE(geo->src.full_height));
+	/* chroma height has to reduced by 2 to avoid chroma distorions */
+	vp_write(mdev, VP_IMG_SIZE_C, VP_IMG_HSIZE(geo->src.full_width) |
+		VP_IMG_VSIZE(geo->src.full_height / 2));
+
+	vp_write(mdev, VP_SRC_WIDTH, geo->src.width);
+	vp_write(mdev, VP_SRC_HEIGHT, geo->src.height);
+	vp_write(mdev, VP_SRC_H_POSITION,
+		VP_SRC_H_POSITION_VAL(geo->src.x_offset));
+	vp_write(mdev, VP_SRC_V_POSITION, geo->src.y_offset);
+
+	vp_write(mdev, VP_DST_WIDTH, geo->dst.width);
+	vp_write(mdev, VP_DST_H_POSITION, geo->dst.x_offset);
+	if (geo->dst.field == V4L2_FIELD_INTERLACED) {
+		vp_write(mdev, VP_DST_HEIGHT, geo->dst.height / 2);
+		vp_write(mdev, VP_DST_V_POSITION, geo->dst.y_offset / 2);
+	} else {
+		vp_write(mdev, VP_DST_HEIGHT, geo->dst.height);
+		vp_write(mdev, VP_DST_V_POSITION, geo->dst.y_offset);
+	}
+
+	vp_write(mdev, VP_H_RATIO, geo->x_ratio);
+	vp_write(mdev, VP_V_RATIO, geo->y_ratio);
+
+	vp_write(mdev, VP_ENDIAN_MODE, VP_ENDIAN_MODE_LITTLE);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+
+}
+
+void mxr_reg_graph_buffer(struct mxr_device *mdev, int idx, dma_addr_t addr)
+{
+	u32 val = addr ? ~0 : 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	if (idx == 0)
+		mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_GRP0_ENABLE);
+	else
+		mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_GRP1_ENABLE);
+	mxr_write(mdev, MXR_GRAPHIC_BASE(idx), addr);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+void mxr_reg_vp_buffer(struct mxr_device *mdev,
+	dma_addr_t luma_addr[2], dma_addr_t chroma_addr[2])
+{
+	u32 val = luma_addr[0] ? ~0 : 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_VP_ENABLE);
+	vp_write_mask(mdev, VP_ENABLE, val, VP_ENABLE_ON);
+	/* TODO: fix tiled mode */
+	vp_write(mdev, VP_TOP_Y_PTR, luma_addr[0]);
+	vp_write(mdev, VP_TOP_C_PTR, chroma_addr[0]);
+	vp_write(mdev, VP_BOT_Y_PTR, luma_addr[1]);
+	vp_write(mdev, VP_BOT_C_PTR, chroma_addr[1]);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+static void mxr_irq_layer_handle(struct mxr_layer *layer)
+{
+	struct list_head *head = &layer->enq_list;
+	struct mxr_buffer *done;
+
+	/* skip non-existing layer */
+	if (layer == NULL)
+		return;
+
+	spin_lock(&layer->enq_slock);
+	if (layer->state == MXR_LAYER_IDLE)
+		goto done;
+
+	done = layer->shadow_buf;
+	layer->shadow_buf = layer->update_buf;
+
+	if (list_empty(head)) {
+		if (layer->state != MXR_LAYER_STREAMING)
+			layer->update_buf = NULL;
+	} else {
+		struct mxr_buffer *next;
+		next = list_first_entry(head, struct mxr_buffer, list);
+		list_del(&next->list);
+		layer->update_buf = next;
+	}
+
+	layer->ops.buffer_set(layer, layer->update_buf);
+
+	if (done && done != layer->shadow_buf)
+		vb2_buffer_done(&done->vb, VB2_BUF_STATE_DONE);
+
+done:
+	spin_unlock(&layer->enq_slock);
+}
+
+irqreturn_t mxr_irq_handler(int irq, void *dev_data)
+{
+	struct mxr_device *mdev = dev_data;
+	u32 i, val;
+
+	spin_lock(&mdev->reg_slock);
+	val = mxr_read(mdev, MXR_INT_STATUS);
+
+	/* wake up process waiting for VSYNC */
+	if (val & MXR_INT_STATUS_VSYNC) {
+		set_bit(MXR_EVENT_VSYNC, &mdev->event_flags);
+		wake_up(&mdev->event_queue);
+	}
+
+	/* clear interrupts */
+	if (~val & MXR_INT_EN_VSYNC) {
+		/* vsync interrupt use different bit for read and clear */
+		val &= ~MXR_INT_EN_VSYNC;
+		val |= MXR_INT_CLEAR_VSYNC;
+	}
+	mxr_write(mdev, MXR_INT_STATUS, val);
+
+	spin_unlock(&mdev->reg_slock);
+	/* leave on non-vsync event */
+	if (~val & MXR_INT_CLEAR_VSYNC)
+		return IRQ_HANDLED;
+	for (i = 0; i < MXR_MAX_LAYERS; ++i)
+		mxr_irq_layer_handle(mdev->layer[i]);
+	return IRQ_HANDLED;
+}
+
+void mxr_reg_s_output(struct mxr_device *mdev, int cookie)
+{
+	u32 val;
+
+	val = cookie == 0 ? MXR_CFG_DST_SDO : MXR_CFG_DST_HDMI;
+	mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_DST_MASK);
+}
+
+void mxr_reg_streamon(struct mxr_device *mdev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	/* single write -> no need to block vsync update */
+
+	/* start MIXER */
+	mxr_write_mask(mdev, MXR_STATUS, ~0, MXR_STATUS_REG_RUN);
+
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+void mxr_reg_streamoff(struct mxr_device *mdev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	/* single write -> no need to block vsync update */
+
+	/* stop MIXER */
+	mxr_write_mask(mdev, MXR_STATUS, 0, MXR_STATUS_REG_RUN);
+
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+int mxr_reg_wait4vsync(struct mxr_device *mdev)
+{
+	int ret;
+
+	clear_bit(MXR_EVENT_VSYNC, &mdev->event_flags);
+	/* TODO: consider adding interruptible */
+	ret = wait_event_timeout(mdev->event_queue,
+		test_bit(MXR_EVENT_VSYNC, &mdev->event_flags),
+		msecs_to_jiffies(1000));
+	if (ret > 0)
+		return 0;
+	if (ret < 0)
+		return ret;
+	mxr_warn(mdev, "no vsync detected - timeout\n");
+	return -ETIME;
+}
+
+void mxr_reg_set_mbus_fmt(struct mxr_device *mdev,
+	struct v4l2_mbus_framefmt *fmt)
+{
+	u32 val = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	/* choosing between interlace and progressive mode */
+	if (fmt->field == V4L2_FIELD_INTERLACED)
+		val |= MXR_CFG_SCAN_INTERLACE;
+	else
+		val |= MXR_CFG_SCAN_PROGRASSIVE;
+
+	/* choosing between porper HD and SD mode */
+	if (fmt->height == 480)
+		val |= MXR_CFG_SCAN_NTSC | MXR_CFG_SCAN_SD;
+	else if (fmt->height == 576)
+		val |= MXR_CFG_SCAN_PAL | MXR_CFG_SCAN_SD;
+	else if (fmt->height == 720)
+		val |= MXR_CFG_SCAN_HD_720 | MXR_CFG_SCAN_HD;
+	else if (fmt->height == 1080)
+		val |= MXR_CFG_SCAN_HD_1080 | MXR_CFG_SCAN_HD;
+	else
+		WARN(1, "unrecognized mbus height %u!\n", fmt->height);
+
+	mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_SCAN_MASK);
+
+	val = (fmt->field == V4L2_FIELD_INTERLACED) ? ~0 : 0;
+	vp_write_mask(mdev, VP_MODE, val,
+		VP_MODE_LINE_SKIP | VP_MODE_FIELD_ID_AUTO_TOGGLING);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+void mxr_reg_graph_layer_stream(struct mxr_device *mdev, int idx, int en)
+{
+	/* no extra actions need to be done */
+}
+
+void mxr_reg_vp_layer_stream(struct mxr_device *mdev, int en)
+{
+	/* no extra actions need to be done */
+}
+
+static const u8 filter_y_horiz_tap8[] = {
+	0,	-1,	-1,	-1,	-1,	-1,	-1,	-1,
+	-1,	-1,	-1,	-1,	-1,	0,	0,	0,
+	0,	2,	4,	5,	6,	6,	6,	6,
+	6,	5,	5,	4,	3,	2,	1,	1,
+	0,	-6,	-12,	-16,	-18,	-20,	-21,	-20,
+	-20,	-18,	-16,	-13,	-10,	-8,	-5,	-2,
+	127,	126,	125,	121,	114,	107,	99,	89,
+	79,	68,	57,	46,	35,	25,	16,	8,
+};
+
+static const u8 filter_y_vert_tap4[] = {
+	0,	-3,	-6,	-8,	-8,	-8,	-8,	-7,
+	-6,	-5,	-4,	-3,	-2,	-1,	-1,	0,
+	127,	126,	124,	118,	111,	102,	92,	81,
+	70,	59,	48,	37,	27,	19,	11,	5,
+	0,	5,	11,	19,	27,	37,	48,	59,
+	70,	81,	92,	102,	111,	118,	124,	126,
+	0,	0,	-1,	-1,	-2,	-3,	-4,	-5,
+	-6,	-7,	-8,	-8,	-8,	-8,	-6,	-3,
+};
+
+static const u8 filter_cr_horiz_tap4[] = {
+	0,	-3,	-6,	-8,	-8,	-8,	-8,	-7,
+	-6,	-5,	-4,	-3,	-2,	-1,	-1,	0,
+	127,	126,	124,	118,	111,	102,	92,	81,
+	70,	59,	48,	37,	27,	19,	11,	5,
+};
+
+static inline void mxr_reg_vp_filter_set(struct mxr_device *mdev,
+	int reg_id, const u8 *data, unsigned int size)
+{
+	/* assure 4-byte align */
+	BUG_ON(size & 3);
+	for (; size; size -= 4, reg_id += 4, data += 4) {
+		u32 val = (data[0] << 24) |  (data[1] << 16) |
+			(data[2] << 8) | data[3];
+		vp_write(mdev, reg_id, val);
+	}
+}
+
+static void mxr_reg_vp_default_filter(struct mxr_device *mdev)
+{
+	mxr_reg_vp_filter_set(mdev, VP_POLY8_Y0_LL,
+		filter_y_horiz_tap8, sizeof filter_y_horiz_tap8);
+	mxr_reg_vp_filter_set(mdev, VP_POLY4_Y0_LL,
+		filter_y_vert_tap4, sizeof filter_y_vert_tap4);
+	mxr_reg_vp_filter_set(mdev, VP_POLY4_C0_LL,
+		filter_cr_horiz_tap4, sizeof filter_cr_horiz_tap4);
+}
+
+static void mxr_reg_mxr_dump(struct mxr_device *mdev)
+{
+#define DUMPREG(reg_id) \
+do { \
+	mxr_dbg(mdev, #reg_id " = %08x\n", \
+		(u32)readl(mdev->res.mxr_regs + reg_id)); \
+} while (0)
+
+	DUMPREG(MXR_STATUS);
+	DUMPREG(MXR_CFG);
+	DUMPREG(MXR_INT_EN);
+	DUMPREG(MXR_INT_STATUS);
+
+	DUMPREG(MXR_LAYER_CFG);
+	DUMPREG(MXR_VIDEO_CFG);
+
+	DUMPREG(MXR_GRAPHIC0_CFG);
+	DUMPREG(MXR_GRAPHIC0_BASE);
+	DUMPREG(MXR_GRAPHIC0_SPAN);
+	DUMPREG(MXR_GRAPHIC0_WH);
+	DUMPREG(MXR_GRAPHIC0_SXY);
+	DUMPREG(MXR_GRAPHIC0_DXY);
+
+	DUMPREG(MXR_GRAPHIC1_CFG);
+	DUMPREG(MXR_GRAPHIC1_BASE);
+	DUMPREG(MXR_GRAPHIC1_SPAN);
+	DUMPREG(MXR_GRAPHIC1_WH);
+	DUMPREG(MXR_GRAPHIC1_SXY);
+	DUMPREG(MXR_GRAPHIC1_DXY);
+#undef DUMPREG
+}
+
+static void mxr_reg_vp_dump(struct mxr_device *mdev)
+{
+#define DUMPREG(reg_id) \
+do { \
+	mxr_dbg(mdev, #reg_id " = %08x\n", \
+		(u32) readl(mdev->res.vp_regs + reg_id)); \
+} while (0)
+
+
+	DUMPREG(VP_ENABLE);
+	DUMPREG(VP_SRESET);
+	DUMPREG(VP_SHADOW_UPDATE);
+	DUMPREG(VP_FIELD_ID);
+	DUMPREG(VP_MODE);
+	DUMPREG(VP_IMG_SIZE_Y);
+	DUMPREG(VP_IMG_SIZE_C);
+	DUMPREG(VP_PER_RATE_CTRL);
+	DUMPREG(VP_TOP_Y_PTR);
+	DUMPREG(VP_BOT_Y_PTR);
+	DUMPREG(VP_TOP_C_PTR);
+	DUMPREG(VP_BOT_C_PTR);
+	DUMPREG(VP_ENDIAN_MODE);
+	DUMPREG(VP_SRC_H_POSITION);
+	DUMPREG(VP_SRC_V_POSITION);
+	DUMPREG(VP_SRC_WIDTH);
+	DUMPREG(VP_SRC_HEIGHT);
+	DUMPREG(VP_DST_H_POSITION);
+	DUMPREG(VP_DST_V_POSITION);
+	DUMPREG(VP_DST_WIDTH);
+	DUMPREG(VP_DST_HEIGHT);
+	DUMPREG(VP_H_RATIO);
+	DUMPREG(VP_V_RATIO);
+
+#undef DUMPREG
+}
+
+void mxr_reg_dump(struct mxr_device *mdev)
+{
+	mxr_reg_mxr_dump(mdev);
+	mxr_reg_vp_dump(mdev);
+}
+
diff --git a/drivers/media/video/s5p-tv/mixer_video.c b/drivers/media/video/s5p-tv/mixer_video.c
new file mode 100644
index 0000000..43ac22f
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer_video.c
@@ -0,0 +1,1006 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include "mixer.h"
+
+#include <media/v4l2-ioctl.h>
+#include <linux/videodev2.h>
+#include <linux/mm.h>
+#include <linux/version.h>
+#include <linux/timer.h>
+#include <media/videobuf2-dma-contig.h>
+
+static int find_reg_callback(struct device *dev, void *p)
+{
+	struct v4l2_subdev **sd = p;
+
+	*sd = dev_get_drvdata(dev);
+	/* non-zero value stops iteration */
+	return 1;
+}
+
+static struct v4l2_subdev *find_and_register_subdev(
+	struct mxr_device *mdev, char *module_name)
+{
+	struct device_driver *drv;
+	struct v4l2_subdev *sd = NULL;
+	int ret;
+
+	/* TODO: add waiting until probe is finished */
+	drv = driver_find(module_name, &platform_bus_type);
+	if (!drv) {
+		mxr_warn(mdev, "module %s is missing\n", module_name);
+		return NULL;
+	}
+	/* driver refcnt is increased, it is safe to iterate over devices */
+	ret = driver_for_each_device(drv, NULL, &sd, find_reg_callback);
+	/* ret == 0 means that find_reg_callback was never executed */
+	if (sd == NULL) {
+		mxr_warn(mdev, "module %s provides no subdev!\n", module_name);
+		goto done;
+	}
+	/* v4l2_device_register_subdev detects if sd is NULL */
+	ret = v4l2_device_register_subdev(&mdev->v4l2_dev, sd);
+	if (ret) {
+		mxr_warn(mdev, "failed to register subdev %s\n", sd->name);
+		sd = NULL;
+	}
+
+done:
+	put_driver(drv);
+	return sd;
+}
+
+int __devinit mxr_acquire_video(struct mxr_device *mdev,
+	struct mxr_output_conf *output_conf, int output_count)
+{
+	struct device *dev = mdev->dev;
+	struct v4l2_device *v4l2_dev = &mdev->v4l2_dev;
+	int i;
+	int ret = 0;
+	struct v4l2_subdev *sd;
+
+	strlcpy(v4l2_dev->name, dev_name(mdev->dev), sizeof(v4l2_dev->name));
+	/* prepare context for V4L2 device */
+	ret = v4l2_device_register(dev, v4l2_dev);
+	if (ret) {
+		mxr_err(mdev, "could not register v4l2 device.\n");
+		goto fail;
+	}
+
+	mdev->alloc_ctx = vb2_dma_contig_init_ctx(mdev->dev);
+	if (IS_ERR_OR_NULL(mdev->alloc_ctx)) {
+		mxr_err(mdev, "could not acquire vb2 allocator\n");
+		goto fail_v4l2_dev;
+	}
+
+	/* registering outputs */
+	mdev->output_cnt = 0;
+	for (i = 0; i < output_count; ++i) {
+		struct mxr_output_conf *conf = &output_conf[i];
+		struct mxr_output *out;
+
+		sd = find_and_register_subdev(mdev, conf->module_name);
+		/* trying to register next output */
+		if (sd == NULL)
+			continue;
+		out = kzalloc(sizeof *out, GFP_KERNEL);
+		if (out == NULL) {
+			mxr_err(mdev, "no memory for '%s'\n",
+				conf->output_name);
+			ret = -ENOMEM;
+			/* registered subdevs are removed in fail_v4l2_dev */
+			goto fail_output;
+		}
+		strlcpy(out->name, conf->output_name, sizeof(out->name));
+		out->sd = sd;
+		out->cookie = conf->cookie;
+		mdev->output[mdev->output_cnt++] = out;
+		mxr_info(mdev, "added output '%s' from module '%s'\n",
+			conf->output_name, conf->module_name);
+		/* checking if maximal number of outputs is reached */
+		if (mdev->output_cnt >= MXR_MAX_OUTPUTS)
+			break;
+	}
+
+	if (mdev->output_cnt == 0) {
+		mxr_err(mdev, "failed to register any output\n");
+		ret = -ENODEV;
+		/* skipping fail_output because there is nothing to free */
+		goto fail_vb2_allocator;
+	}
+
+	return 0;
+
+fail_output:
+	/* kfree is NULL-safe */
+	for (i = 0; i < mdev->output_cnt; ++i)
+		kfree(mdev->output[i]);
+	memset(mdev->output, 0, sizeof mdev->output);
+
+fail_vb2_allocator:
+	/* freeing allocator context */
+	vb2_dma_contig_cleanup_ctx(mdev->alloc_ctx);
+
+fail_v4l2_dev:
+	/* NOTE: automatically unregister all subdevs */
+	v4l2_device_unregister(v4l2_dev);
+
+fail:
+	return ret;
+}
+
+void __devexit mxr_release_video(struct mxr_device *mdev)
+{
+	int i;
+
+	/* kfree is NULL-safe */
+	for (i = 0; i < mdev->output_cnt; ++i)
+		kfree(mdev->output[i]);
+
+	vb2_dma_contig_cleanup_ctx(mdev->alloc_ctx);
+	v4l2_device_unregister(&mdev->v4l2_dev);
+}
+
+static int mxr_querycap(struct file *file, void *priv,
+	struct v4l2_capability *cap)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+
+	strlcpy(cap->driver, MXR_DRIVER_NAME, sizeof cap->driver);
+	strlcpy(cap->card, layer->vfd.name, sizeof cap->card);
+	sprintf(cap->bus_info, "%d", layer->idx);
+	cap->version = KERNEL_VERSION(0, 1, 0);
+	cap->capabilities = V4L2_CAP_STREAMING |
+		V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_VIDEO_OUTPUT_MPLANE;
+
+	return 0;
+}
+
+/* Geometry handling */
+static void mxr_layer_geo_fix(struct mxr_layer *layer)
+{
+	struct mxr_device *mdev = layer->mdev;
+	struct v4l2_mbus_framefmt mbus_fmt;
+
+	/* TODO: add some dirty flag to avoid unnecessary adjustments */
+	mxr_get_mbus_fmt(mdev, &mbus_fmt);
+	layer->geo.dst.full_width = mbus_fmt.width;
+	layer->geo.dst.full_height = mbus_fmt.height;
+	layer->geo.dst.field = mbus_fmt.field;
+	layer->ops.fix_geometry(layer);
+}
+
+static void mxr_layer_default_geo(struct mxr_layer *layer)
+{
+	struct mxr_device *mdev = layer->mdev;
+	struct v4l2_mbus_framefmt mbus_fmt;
+
+	memset(&layer->geo, 0, sizeof layer->geo);
+
+	mxr_get_mbus_fmt(mdev, &mbus_fmt);
+
+	layer->geo.dst.full_width = mbus_fmt.width;
+	layer->geo.dst.full_height = mbus_fmt.height;
+	layer->geo.dst.width = layer->geo.dst.full_width;
+	layer->geo.dst.height = layer->geo.dst.full_height;
+	layer->geo.dst.field = mbus_fmt.field;
+
+	layer->geo.src.full_width = mbus_fmt.width;
+	layer->geo.src.full_height = mbus_fmt.height;
+	layer->geo.src.width = layer->geo.src.full_width;
+	layer->geo.src.height = layer->geo.src.full_height;
+
+	layer->ops.fix_geometry(layer);
+}
+
+static void mxr_geometry_dump(struct mxr_device *mdev, struct mxr_geometry *geo)
+{
+	mxr_dbg(mdev, "src.full_size = (%u, %u)\n",
+		geo->src.full_width, geo->src.full_height);
+	mxr_dbg(mdev, "src.size = (%u, %u)\n",
+		geo->src.width, geo->src.height);
+	mxr_dbg(mdev, "src.offset = (%u, %u)\n",
+		geo->src.x_offset, geo->src.y_offset);
+	mxr_dbg(mdev, "dst.full_size = (%u, %u)\n",
+		geo->dst.full_width, geo->dst.full_height);
+	mxr_dbg(mdev, "dst.size = (%u, %u)\n",
+		geo->dst.width, geo->dst.height);
+	mxr_dbg(mdev, "dst.offset = (%u, %u)\n",
+		geo->dst.x_offset, geo->dst.y_offset);
+	mxr_dbg(mdev, "ratio = (%u, %u)\n",
+		geo->x_ratio, geo->y_ratio);
+}
+
+
+static const struct mxr_format *find_format_by_fourcc(
+	struct mxr_layer *layer, unsigned long fourcc);
+static const struct mxr_format *find_format_by_index(
+	struct mxr_layer *layer, unsigned long index);
+
+static int mxr_enum_fmt(struct file *file, void  *priv,
+	struct v4l2_fmtdesc *f)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	const struct mxr_format *fmt;
+
+	mxr_dbg(mdev, "%s\n", __func__);
+	fmt = find_format_by_index(layer, f->index);
+	if (fmt == NULL)
+		return -EINVAL;
+
+	strlcpy(f->description, fmt->name, sizeof(f->description));
+	f->pixelformat = fmt->fourcc;
+
+	return 0;
+}
+
+static int mxr_s_fmt(struct file *file, void *priv,
+	struct v4l2_format *f)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	const struct mxr_format *fmt;
+	struct v4l2_pix_format_mplane *pix;
+	struct mxr_device *mdev = layer->mdev;
+	struct mxr_geometry *geo = &layer->geo;
+
+	mxr_dbg(mdev, "%s:%d\n", __func__, __LINE__);
+
+	pix = &f->fmt.pix_mp;
+	fmt = find_format_by_fourcc(layer, pix->pixelformat);
+	if (fmt == NULL) {
+		mxr_warn(mdev, "not recognized fourcc: %08x\n",
+			pix->pixelformat);
+		return -EINVAL;
+	}
+	layer->fmt = fmt;
+	geo->src.full_width = pix->width;
+	geo->src.width = pix->width;
+	geo->src.full_height = pix->height;
+	geo->src.height = pix->height;
+	/* assure consistency of geometry */
+	mxr_layer_geo_fix(layer);
+	mxr_dbg(mdev, "width=%u height=%u span=%u\n",
+		geo->src.width, geo->src.height, geo->src.full_width);
+
+	return 0;
+}
+
+static unsigned int divup(unsigned int divident, unsigned int divisor)
+{
+	return (divident + divisor - 1) / divisor;
+}
+
+unsigned long mxr_get_plane_size(const struct mxr_block *blk,
+	unsigned int width, unsigned int height)
+{
+	unsigned int bl_width = divup(width, blk->width);
+	unsigned int bl_height = divup(height, blk->height);
+
+	return bl_width * bl_height * blk->size;
+}
+
+static void mxr_mplane_fill(struct v4l2_plane_pix_format *planes,
+	const struct mxr_format *fmt, u32 width, u32 height)
+{
+	int i;
+
+	memset(planes, 0, sizeof(*planes) * fmt->num_subframes);
+	for (i = 0; i < fmt->num_planes; ++i) {
+		struct v4l2_plane_pix_format *plane = planes
+			+ fmt->plane2subframe[i];
+		const struct mxr_block *blk = &fmt->plane[i];
+		u32 bl_width = divup(width, blk->width);
+		u32 bl_height = divup(height, blk->height);
+		u32 sizeimage = bl_width * bl_height * blk->size;
+		u16 bytesperline = bl_width * blk->size / blk->height;
+
+		plane->sizeimage += sizeimage;
+		plane->bytesperline = max(plane->bytesperline, bytesperline);
+	}
+}
+
+static int mxr_g_fmt(struct file *file, void *priv,
+			     struct v4l2_format *f)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+
+	pix->width = layer->geo.src.full_width;
+	pix->height = layer->geo.src.full_height;
+	pix->field = V4L2_FIELD_NONE;
+	pix->pixelformat = layer->fmt->fourcc;
+	pix->colorspace = layer->fmt->colorspace;
+	mxr_mplane_fill(pix->plane_fmt, layer->fmt, pix->width, pix->height);
+
+	return 0;
+}
+
+static inline struct mxr_crop *choose_crop_by_type(struct mxr_geometry *geo,
+	enum v4l2_buf_type type)
+{
+	switch (type) {
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
+		return &geo->dst;
+	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+		return &geo->src;
+	default:
+		return NULL;
+	}
+}
+
+static int mxr_g_crop(struct file *file, void *fh, struct v4l2_crop *a)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_crop *crop;
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	crop = choose_crop_by_type(&layer->geo, a->type);
+	if (crop == NULL)
+		return -EINVAL;
+	mxr_layer_geo_fix(layer);
+	a->c.left = crop->x_offset;
+	a->c.top = crop->y_offset;
+	a->c.width = crop->width;
+	a->c.height = crop->height;
+	return 0;
+}
+
+static int mxr_s_crop(struct file *file, void *fh, struct v4l2_crop *a)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_crop *crop;
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	crop = choose_crop_by_type(&layer->geo, a->type);
+	if (crop == NULL)
+		return -EINVAL;
+	crop->x_offset = a->c.left;
+	crop->y_offset = a->c.top;
+	crop->width = a->c.width;
+	crop->height = a->c.height;
+	mxr_layer_geo_fix(layer);
+	return 0;
+}
+
+static int mxr_cropcap(struct file *file, void *fh, struct v4l2_cropcap *a)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_crop *crop;
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	crop = choose_crop_by_type(&layer->geo, a->type);
+	if (crop == NULL)
+		return -EINVAL;
+	mxr_layer_geo_fix(layer);
+	a->bounds.left = 0;
+	a->bounds.top = 0;
+	a->bounds.width = crop->full_width;
+	a->bounds.top = crop->full_height;
+	a->defrect = a->bounds;
+	/* setting pixel aspect to 1/1 */
+	a->pixelaspect.numerator = 1;
+	a->pixelaspect.denominator = 1;
+	return 0;
+}
+
+static int mxr_enum_dv_presets(struct file *file, void *fh,
+	struct v4l2_dv_enum_preset *preset)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	/* lock protects from changing sd_out */
+	mutex_lock(&mdev->mutex);
+	ret = v4l2_subdev_call(to_outsd(mdev), video, enum_dv_presets, preset);
+	mutex_unlock(&mdev->mutex);
+
+	return ret ? -EINVAL : 0;
+}
+
+static int mxr_s_dv_preset(struct file *file, void *fh,
+	struct v4l2_dv_preset *preset)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	/* lock protects from changing sd_out */
+	mutex_lock(&mdev->mutex);
+
+	/* preset change cannot be done while there is an entity
+	 * dependant on output configuration
+	 */
+	if (mdev->n_output > 0) {
+		mutex_unlock(&mdev->mutex);
+		return -EBUSY;
+	}
+
+	ret = v4l2_subdev_call(to_outsd(mdev), video, s_dv_preset, preset);
+
+	mutex_unlock(&mdev->mutex);
+
+	/* any failure should return EINVAL according to V4L2 doc */
+	return ret ? -EINVAL : 0;
+}
+
+static int mxr_g_dv_preset(struct file *file, void *fh,
+	struct v4l2_dv_preset *preset)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	/* lock protects from changing sd_out */
+	mutex_lock(&mdev->mutex);
+	ret = v4l2_subdev_call(to_outsd(mdev), video, g_dv_preset, preset);
+	mutex_unlock(&mdev->mutex);
+
+	return ret ? -EINVAL : 0;
+}
+
+static int mxr_s_std(struct file *file, void *fh, v4l2_std_id *norm)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	/* lock protects from changing sd_out */
+	mutex_lock(&mdev->mutex);
+
+	/* standard change cannot be done while there is an entity
+	 * dependant on output configuration
+	 */
+	if (mdev->n_output > 0) {
+		mutex_unlock(&mdev->mutex);
+		return -EBUSY;
+	}
+
+	ret = v4l2_subdev_call(to_outsd(mdev), video, s_std_output, *norm);
+
+	mutex_unlock(&mdev->mutex);
+
+	return ret ? -EINVAL : 0;
+}
+
+static int mxr_g_std(struct file *file, void *fh, v4l2_std_id *norm)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	/* lock protects from changing sd_out */
+	mutex_lock(&mdev->mutex);
+	ret = v4l2_subdev_call(to_outsd(mdev), video, g_std_output, norm);
+	mutex_unlock(&mdev->mutex);
+
+	return ret ? -EINVAL : 0;
+}
+
+static int mxr_enum_output(struct file *file, void *fh, struct v4l2_output *a)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	struct mxr_output *out;
+	struct v4l2_subdev *sd;
+
+	if (a->index >= mdev->output_cnt)
+		return -EINVAL;
+	out = mdev->output[a->index];
+	BUG_ON(out == NULL);
+	sd = out->sd;
+	strlcpy(a->name, out->name, sizeof(a->name));
+
+	/* try to obtain supported tv norms */
+	v4l2_subdev_call(sd, video, g_tvnorms_output, &a->std);
+	a->capabilities = 0;
+	if (sd->ops->video && sd->ops->video->s_dv_preset)
+		a->capabilities |= V4L2_OUT_CAP_PRESETS;
+	if (sd->ops->video && sd->ops->video->s_std_output)
+		a->capabilities |= V4L2_OUT_CAP_STD;
+	a->type = V4L2_OUTPUT_TYPE_ANALOG;
+
+	return 0;
+}
+
+static int mxr_s_output(struct file *file, void *fh, unsigned int i)
+{
+	struct video_device *vfd = video_devdata(file);
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret = 0;
+
+	if (i >= mdev->output_cnt || mdev->output[i] == NULL)
+		return -EINVAL;
+
+	mutex_lock(&mdev->mutex);
+	if (mdev->n_output > 0) {
+		ret = -EBUSY;
+		goto done;
+	}
+	mdev->current_output = i;
+	vfd->tvnorms = 0;
+	v4l2_subdev_call(to_outsd(mdev), video, g_tvnorms_output,
+		&vfd->tvnorms);
+	mxr_dbg(mdev, "tvnorms = %08llx\n", vfd->tvnorms);
+
+done:
+	mutex_unlock(&mdev->mutex);
+	return ret;
+}
+
+static int mxr_g_output(struct file *file, void *fh, unsigned int *p)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+
+	mutex_lock(&mdev->mutex);
+	*p = mdev->current_output;
+	mutex_unlock(&mdev->mutex);
+
+	return 0;
+}
+
+static int mxr_reqbufs(struct file *file, void *priv,
+			  struct v4l2_requestbuffers *p)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	return vb2_reqbufs(&layer->vb_queue, p);
+}
+
+static int mxr_querybuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	return vb2_querybuf(&layer->vb_queue, p);
+}
+
+static int mxr_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d(%d)\n", __func__, __LINE__, p->index);
+	return vb2_qbuf(&layer->vb_queue, p);
+}
+
+static int mxr_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	return vb2_dqbuf(&layer->vb_queue, p, file->f_flags & O_NONBLOCK);
+}
+
+static int mxr_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	return vb2_streamon(&layer->vb_queue, i);
+}
+
+static int mxr_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	return vb2_streamoff(&layer->vb_queue, i);
+}
+
+static const struct v4l2_ioctl_ops mxr_ioctl_ops = {
+	.vidioc_querycap = mxr_querycap,
+	/* format handling */
+	.vidioc_enum_fmt_vid_out = mxr_enum_fmt,
+	.vidioc_s_fmt_vid_out_mplane = mxr_s_fmt,
+	.vidioc_g_fmt_vid_out_mplane = mxr_g_fmt,
+	/* buffer control */
+	.vidioc_reqbufs = mxr_reqbufs,
+	.vidioc_querybuf = mxr_querybuf,
+	.vidioc_qbuf = mxr_qbuf,
+	.vidioc_dqbuf = mxr_dqbuf,
+	/* Streaming control */
+	.vidioc_streamon = mxr_streamon,
+	.vidioc_streamoff = mxr_streamoff,
+	/* Preset functions */
+	.vidioc_enum_dv_presets = mxr_enum_dv_presets,
+	.vidioc_s_dv_preset = mxr_s_dv_preset,
+	.vidioc_g_dv_preset = mxr_g_dv_preset,
+	/* analog TV standard functions */
+	.vidioc_s_std = mxr_s_std,
+	.vidioc_g_std = mxr_g_std,
+	/* Output handling */
+	.vidioc_enum_output = mxr_enum_output,
+	.vidioc_s_output = mxr_s_output,
+	.vidioc_g_output = mxr_g_output,
+	/* Crop ioctls */
+	.vidioc_g_crop = mxr_g_crop,
+	.vidioc_s_crop = mxr_s_crop,
+	.vidioc_cropcap = mxr_cropcap,
+};
+
+static int mxr_video_open(struct file *file)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret = 0;
+
+	mxr_dbg(mdev, "%s:%d\n", __func__, __LINE__);
+	/* assure device probe is finished */
+	wait_for_device_probe();
+	/* creating context for file descriptor */
+	ret = v4l2_fh_open(file);
+	if (ret) {
+		mxr_err(mdev, "v4l2_fh_open failed\n");
+		return ret;
+	}
+
+	/* leaving if layer is already initialized */
+	if (!v4l2_fh_is_singular_file(file))
+		return 0;
+
+	/* FIXME: should power be enabled on open? */
+	ret = mxr_power_get(mdev);
+	if (ret) {
+		mxr_err(mdev, "power on failed\n");
+		goto fail_fh_open;
+	}
+
+	ret = vb2_queue_init(&layer->vb_queue);
+	if (ret != 0) {
+		mxr_err(mdev, "failed to initialize vb2 queue\n");
+		goto fail_power;
+	}
+	/* set default format, first on the list */
+	layer->fmt = layer->fmt_array[0];
+	/* setup default geometry */
+	mxr_layer_default_geo(layer);
+
+	return 0;
+
+fail_power:
+	mxr_power_put(mdev);
+
+fail_fh_open:
+	v4l2_fh_release(file);
+
+	return ret;
+}
+
+static unsigned int
+mxr_video_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+
+	return vb2_poll(&layer->vb_queue, file, wait);
+}
+
+static int mxr_video_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+
+	return vb2_mmap(&layer->vb_queue, vma);
+}
+
+static int mxr_video_release(struct file *file)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	if (v4l2_fh_is_singular_file(file)) {
+		vb2_queue_release(&layer->vb_queue);
+		mxr_power_put(layer->mdev);
+	}
+	v4l2_fh_release(file);
+	return 0;
+}
+
+static const struct v4l2_file_operations mxr_fops = {
+	.owner = THIS_MODULE,
+	.open = mxr_video_open,
+	.poll = mxr_video_poll,
+	.mmap = mxr_video_mmap,
+	.release = mxr_video_release,
+	.unlocked_ioctl = video_ioctl2,
+};
+
+static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+	unsigned int *nplanes, unsigned long sizes[],
+	void *alloc_ctxs[])
+{
+	struct mxr_layer *layer = vb2_get_drv_priv(vq);
+	const struct mxr_format *fmt = layer->fmt;
+	int i;
+	struct mxr_device *mdev = layer->mdev;
+	struct v4l2_plane_pix_format planes[3];
+
+	mxr_dbg(mdev, "%s\n", __func__);
+	/* checking if format was configured */
+	if (fmt == NULL)
+		return -EINVAL;
+	mxr_dbg(mdev, "fmt = %s\n", fmt->name);
+	mxr_mplane_fill(planes, fmt, layer->geo.src.full_width,
+		layer->geo.src.full_height);
+
+	*nplanes = fmt->num_subframes;
+	for (i = 0; i < fmt->num_subframes; ++i) {
+		alloc_ctxs[i] = layer->mdev->alloc_ctx;
+		sizes[i] = PAGE_ALIGN(planes[i].sizeimage);
+		mxr_dbg(mdev, "size[%d] = %08lx\n", i, sizes[i]);
+	}
+
+	if (*nbuffers == 0)
+		*nbuffers = 1;
+
+	return 0;
+}
+
+static void buf_queue(struct vb2_buffer *vb)
+{
+	struct mxr_buffer *buffer = container_of(vb, struct mxr_buffer, vb);
+	struct mxr_layer *layer = vb2_get_drv_priv(vb->vb2_queue);
+	struct mxr_device *mdev = layer->mdev;
+	unsigned long flags;
+	int must_start = 0;
+
+	spin_lock_irqsave(&layer->enq_slock, flags);
+	if (layer->state == MXR_LAYER_STREAMING_START) {
+		layer->state = MXR_LAYER_STREAMING;
+		must_start = 1;
+	}
+	list_add_tail(&buffer->list, &layer->enq_list);
+	spin_unlock_irqrestore(&layer->enq_slock, flags);
+	if (must_start) {
+		layer->ops.stream_set(layer, MXR_ENABLE);
+		mxr_streamer_get(mdev);
+	}
+
+	mxr_dbg(mdev, "queuing buffer\n");
+}
+
+static void wait_lock(struct vb2_queue *vq)
+{
+	struct mxr_layer *layer = vb2_get_drv_priv(vq);
+
+	mxr_dbg(layer->mdev, "%s\n", __func__);
+	mutex_lock(&layer->mutex);
+}
+
+static void wait_unlock(struct vb2_queue *vq)
+{
+	struct mxr_layer *layer = vb2_get_drv_priv(vq);
+
+	mxr_dbg(layer->mdev, "%s\n", __func__);
+	mutex_unlock(&layer->mutex);
+}
+
+static int start_streaming(struct vb2_queue *vq)
+{
+	struct mxr_layer *layer = vb2_get_drv_priv(vq);
+	struct mxr_device *mdev = layer->mdev;
+	unsigned long flags;
+
+	mxr_dbg(mdev, "%s\n", __func__);
+	/* block any changes in output configuration */
+	mxr_output_get(mdev);
+
+	/* update layers geometry */
+	mxr_layer_geo_fix(layer);
+	mxr_geometry_dump(mdev, &layer->geo);
+
+	layer->ops.format_set(layer);
+	/* enabling layer in hardware */
+	spin_lock_irqsave(&layer->enq_slock, flags);
+	layer->state = MXR_LAYER_STREAMING_START;
+	spin_unlock_irqrestore(&layer->enq_slock, flags);
+
+	return 0;
+}
+
+static void mxr_watchdog(unsigned long arg)
+{
+	struct mxr_layer *layer = (struct mxr_layer *) arg;
+	struct mxr_device *mdev = layer->mdev;
+	unsigned long flags;
+
+	mxr_err(mdev, "watchdog fired for layer %s\n", layer->vfd.name);
+
+	spin_lock_irqsave(&layer->enq_slock, flags);
+
+	if (layer->update_buf == layer->shadow_buf)
+		layer->update_buf = NULL;
+	if (layer->update_buf) {
+		vb2_buffer_done(&layer->update_buf->vb, VB2_BUF_STATE_ERROR);
+		layer->update_buf = NULL;
+	}
+	if (layer->shadow_buf) {
+		vb2_buffer_done(&layer->shadow_buf->vb, VB2_BUF_STATE_ERROR);
+		layer->shadow_buf = NULL;
+	}
+	spin_unlock_irqrestore(&layer->enq_slock, flags);
+}
+
+static int stop_streaming(struct vb2_queue *vq)
+{
+	struct mxr_layer *layer = vb2_get_drv_priv(vq);
+	struct mxr_device *mdev = layer->mdev;
+	unsigned long flags;
+	struct timer_list watchdog;
+	struct mxr_buffer *buf, *buf_tmp;
+
+	mxr_dbg(mdev, "%s\n", __func__);
+
+	spin_lock_irqsave(&layer->enq_slock, flags);
+
+	/* reset list */
+	layer->state = MXR_LAYER_STREAMING_FINISH;
+
+	/* set all buffer to be done */
+	list_for_each_entry_safe(buf, buf_tmp, &layer->enq_list, list) {
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+	}
+
+	spin_unlock_irqrestore(&layer->enq_slock, flags);
+
+	/* give 1 seconds to complete to complete last buffers */
+	setup_timer_on_stack(&watchdog, mxr_watchdog,
+		(unsigned long)layer);
+	mod_timer(&watchdog, jiffies + msecs_to_jiffies(1000));
+
+	/* wait until all buffers are goes to done state */
+	vb2_wait_for_all_buffers(vq);
+
+	/* stop timer if all synchronization is done */
+	del_timer_sync(&watchdog);
+	destroy_timer_on_stack(&watchdog);
+
+	/* stopping hardware */
+	spin_lock_irqsave(&layer->enq_slock, flags);
+	layer->state = MXR_LAYER_IDLE;
+	spin_unlock_irqrestore(&layer->enq_slock, flags);
+
+	/* disabling layer in hardware */
+	layer->ops.stream_set(layer, MXR_DISABLE);
+	/* remove one streamer */
+	mxr_streamer_put(mdev);
+	/* allow changes in output configuration */
+	mxr_output_put(mdev);
+	return 0;
+}
+
+static struct vb2_ops mxr_video_qops = {
+	.queue_setup = queue_setup,
+	.buf_queue = buf_queue,
+	.wait_prepare = wait_unlock,
+	.wait_finish = wait_lock,
+	.start_streaming = start_streaming,
+	.stop_streaming = stop_streaming,
+};
+
+/* FIXME: try to put this functions to mxr_base_layer_create */
+int mxr_base_layer_register(struct mxr_layer *layer)
+{
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	ret = video_register_device(&layer->vfd, VFL_TYPE_GRABBER, -1);
+	if (ret)
+		mxr_err(mdev, "failed to register video device\n");
+	else
+		mxr_info(mdev, "registered layer %s as /dev/video%d\n",
+			layer->vfd.name, layer->vfd.num);
+	return ret;
+}
+
+void mxr_base_layer_unregister(struct mxr_layer *layer)
+{
+	video_unregister_device(&layer->vfd);
+}
+
+void mxr_layer_release(struct mxr_layer *layer)
+{
+	if (layer->ops.release)
+		layer->ops.release(layer);
+}
+
+void mxr_base_layer_release(struct mxr_layer *layer)
+{
+	kfree(layer);
+}
+
+static void mxr_vfd_release(struct video_device *vdev)
+{
+	printk(KERN_INFO "video device release\n");
+}
+
+struct mxr_layer *mxr_base_layer_create(struct mxr_device *mdev,
+	int idx, char *name, struct mxr_layer_ops *ops)
+{
+	struct mxr_layer *layer;
+
+	layer = kzalloc(sizeof *layer, GFP_KERNEL);
+	if (layer == NULL) {
+		mxr_err(mdev, "not enough memory for layer.\n");
+		goto fail;
+	}
+
+	layer->mdev = mdev;
+	layer->idx = idx;
+	layer->ops = *ops;
+
+	spin_lock_init(&layer->enq_slock);
+	INIT_LIST_HEAD(&layer->enq_list);
+	mutex_init(&layer->mutex);
+
+	layer->vfd = (struct video_device) {
+		.minor = -1,
+		.release = mxr_vfd_release,
+		.fops = &mxr_fops,
+		.ioctl_ops = &mxr_ioctl_ops,
+	};
+	strlcpy(layer->vfd.name, name, sizeof(layer->vfd.name));
+	/* let framework control PRIORITY */
+	set_bit(V4L2_FL_USE_FH_PRIO, &layer->vfd.flags);
+
+	video_set_drvdata(&layer->vfd, layer);
+	layer->vfd.lock = &layer->mutex;
+	layer->vfd.v4l2_dev = &mdev->v4l2_dev;
+
+	layer->vb_queue = (struct vb2_queue) {
+		.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE,
+		.io_modes = VB2_MMAP | VB2_USERPTR,
+		.drv_priv = layer,
+		.buf_struct_size = sizeof(struct mxr_buffer),
+		.ops = &mxr_video_qops,
+		.mem_ops = &vb2_dma_contig_memops,
+	};
+
+	return layer;
+
+fail:
+	return NULL;
+}
+
+static const struct mxr_format *find_format_by_fourcc(
+	struct mxr_layer *layer, unsigned long fourcc)
+{
+	int i;
+
+	for (i = 0; i < layer->fmt_array_size; ++i)
+		if (layer->fmt_array[i]->fourcc == fourcc)
+			return layer->fmt_array[i];
+	return NULL;
+}
+
+static const struct mxr_format *find_format_by_index(
+	struct mxr_layer *layer, unsigned long index)
+{
+	if (index >= layer->fmt_array_size)
+		return NULL;
+	return layer->fmt_array[index];
+}
+
diff --git a/drivers/media/video/s5p-tv/mixer_vp_layer.c b/drivers/media/video/s5p-tv/mixer_vp_layer.c
new file mode 100644
index 0000000..6950ed8
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer_vp_layer.c
@@ -0,0 +1,211 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include "mixer.h"
+
+#include "regs-vp.h"
+
+#include <media/videobuf2-dma-contig.h>
+
+/* FORMAT DEFINITIONS */
+static const struct mxr_format mxr_fmt_nv12 = {
+	.name = "NV12",
+	.fourcc = V4L2_PIX_FMT_NV12,
+	.colorspace = V4L2_COLORSPACE_JPEG,
+	.num_planes = 2,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 1 },
+		{ .width = 2, .height = 2, .size = 2 },
+	},
+	.num_subframes = 1,
+	.cookie = VP_MODE_NV12 | VP_MODE_MEM_LINEAR,
+};
+
+static const struct mxr_format mxr_fmt_nv21 = {
+	.name = "NV21",
+	.fourcc = V4L2_PIX_FMT_NV21,
+	.colorspace = V4L2_COLORSPACE_JPEG,
+	.num_planes = 2,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 1 },
+		{ .width = 2, .height = 2, .size = 2 },
+	},
+	.num_subframes = 1,
+	.cookie = VP_MODE_NV21 | VP_MODE_MEM_LINEAR,
+};
+
+static const struct mxr_format mxr_fmt_nv12m = {
+	.name = "NV12 (mplane)",
+	.fourcc = V4L2_PIX_FMT_NV12M,
+	.colorspace = V4L2_COLORSPACE_JPEG,
+	.num_planes = 2,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 1 },
+		{ .width = 2, .height = 2, .size = 2 },
+	},
+	.num_subframes = 2,
+	.plane2subframe = {0, 1},
+	.cookie = VP_MODE_NV12 | VP_MODE_MEM_LINEAR,
+};
+
+static const struct mxr_format mxr_fmt_nv12mt = {
+	.name = "NV12 tiled (mplane)",
+	.fourcc = V4L2_PIX_FMT_NV12MT,
+	.colorspace = V4L2_COLORSPACE_JPEG,
+	.num_planes = 2,
+	.plane = {
+		{ .width = 128, .height = 32, .size = 4096 },
+		{ .width = 128, .height = 32, .size = 2048 },
+	},
+	.num_subframes = 2,
+	.plane2subframe = {0, 1},
+	.cookie = VP_MODE_NV12 | VP_MODE_MEM_TILED,
+};
+
+static const struct mxr_format *mxr_video_format[] = {
+	&mxr_fmt_nv12,
+	&mxr_fmt_nv21,
+	&mxr_fmt_nv12m,
+	&mxr_fmt_nv12mt,
+};
+
+/* AUXILIARY CALLBACKS */
+
+static void mxr_vp_layer_release(struct mxr_layer *layer)
+{
+	mxr_base_layer_unregister(layer);
+	mxr_base_layer_release(layer);
+}
+
+static void mxr_vp_buffer_set(struct mxr_layer *layer,
+	struct mxr_buffer *buf)
+{
+	dma_addr_t luma_addr[2] = {0, 0};
+	dma_addr_t chroma_addr[2] = {0, 0};
+
+	if (buf == NULL) {
+		mxr_reg_vp_buffer(layer->mdev, luma_addr, chroma_addr);
+		return;
+	}
+	luma_addr[0] = vb2_dma_contig_plane_paddr(&buf->vb, 0);
+	if (layer->fmt->num_subframes == 2) {
+		chroma_addr[0] = vb2_dma_contig_plane_paddr(&buf->vb, 1);
+	} else {
+		/* FIXME: mxr_get_plane_size compute integer division,
+		 * which is slow and should not be performed in interrupt */
+		chroma_addr[0] = luma_addr[0] + mxr_get_plane_size(
+			&layer->fmt->plane[0], layer->geo.src.full_width,
+			layer->geo.src.full_height);
+	}
+	if (layer->fmt->cookie & VP_MODE_MEM_TILED) {
+		luma_addr[1] = luma_addr[0] + 0x40;
+		chroma_addr[1] = chroma_addr[0] + 0x40;
+	} else {
+		luma_addr[1] = luma_addr[0] + layer->geo.src.full_width;
+		chroma_addr[1] = chroma_addr[0];
+	}
+	mxr_reg_vp_buffer(layer->mdev, luma_addr, chroma_addr);
+}
+
+static void mxr_vp_stream_set(struct mxr_layer *layer, int en)
+{
+	mxr_reg_vp_layer_stream(layer->mdev, en);
+}
+
+static void mxr_vp_format_set(struct mxr_layer *layer)
+{
+	mxr_reg_vp_format(layer->mdev, layer->fmt, &layer->geo);
+}
+
+static void mxr_vp_fix_geometry(struct mxr_layer *layer)
+{
+	struct mxr_geometry *geo = &layer->geo;
+
+	/* align horizontal size to 8 pixels */
+	geo->src.full_width = ALIGN(geo->src.full_width, 8);
+	/* limit to boundary size */
+	geo->src.full_width = clamp_val(geo->src.full_width, 8, 8192);
+	geo->src.full_height = clamp_val(geo->src.full_height, 1, 8192);
+	geo->src.width = clamp_val(geo->src.width, 32, geo->src.full_width);
+	geo->src.width = min(geo->src.width, 2047U);
+	geo->src.height = clamp_val(geo->src.height, 4, geo->src.full_height);
+	geo->src.height = min(geo->src.height, 2047U);
+
+	/* setting size of output window */
+	geo->dst.width = clamp_val(geo->dst.width, 8, geo->dst.full_width);
+	geo->dst.height = clamp_val(geo->dst.height, 1, geo->dst.full_height);
+
+	/* ensure that scaling is in range 1/4x to 16x */
+	if (geo->src.width >= 4 * geo->dst.width)
+		geo->src.width = 4 * geo->dst.width;
+	if (geo->dst.width >= 16 * geo->src.width)
+		geo->dst.width = 16 * geo->src.width;
+	if (geo->src.height >= 4 * geo->dst.height)
+		geo->src.height = 4 * geo->dst.height;
+	if (geo->dst.height >= 16 * geo->src.height)
+		geo->dst.height = 16 * geo->src.height;
+
+	/* setting scaling ratio */
+	geo->x_ratio = (geo->src.width << 16) / geo->dst.width;
+	geo->y_ratio = (geo->src.height << 16) / geo->dst.height;
+
+	/* adjust offsets */
+	geo->src.x_offset = min(geo->src.x_offset,
+		geo->src.full_width - geo->src.width);
+	geo->src.y_offset = min(geo->src.y_offset,
+		geo->src.full_height - geo->src.height);
+	geo->dst.x_offset = min(geo->dst.x_offset,
+		geo->dst.full_width - geo->dst.width);
+	geo->dst.y_offset = min(geo->dst.y_offset,
+		geo->dst.full_height - geo->dst.height);
+}
+
+/* PUBLIC API */
+
+struct mxr_layer *mxr_vp_layer_create(struct mxr_device *mdev, int idx)
+{
+	struct mxr_layer *layer;
+	int ret;
+	struct mxr_layer_ops ops = {
+		.release = mxr_vp_layer_release,
+		.buffer_set = mxr_vp_buffer_set,
+		.stream_set = mxr_vp_stream_set,
+		.format_set = mxr_vp_format_set,
+		.fix_geometry = mxr_vp_fix_geometry,
+	};
+	char name[32];
+
+	sprintf(name, "video%d", idx);
+
+	layer = mxr_base_layer_create(mdev, idx, name, &ops);
+	if (layer == NULL) {
+		mxr_err(mdev, "failed to initialize layer(%d) base\n", idx);
+		goto fail;
+	}
+
+	layer->fmt_array = mxr_video_format;
+	layer->fmt_array_size = ARRAY_SIZE(mxr_video_format);
+
+	ret = mxr_base_layer_register(layer);
+	if (ret)
+		goto fail_layer;
+
+	return layer;
+
+fail_layer:
+	mxr_base_layer_release(layer);
+
+fail:
+	return NULL;
+}
+
diff --git a/drivers/media/video/s5p-tv/regs-hdmi.h b/drivers/media/video/s5p-tv/regs-hdmi.h
new file mode 100644
index 0000000..ac93ad6
--- /dev/null
+++ b/drivers/media/video/s5p-tv/regs-hdmi.h
@@ -0,0 +1,141 @@
+/* linux/arch/arm/mach-exynos4/include/mach/regs-hdmi.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * HDMI register header file for Samsung TVOUT driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef SAMSUNG_REGS_HDMI_H
+#define SAMSUNG_REGS_HDMI_H
+
+/*
+ * Register part
+*/
+
+#define HDMI_CTRL_BASE(x)		((x) + 0x00000000)
+#define HDMI_CORE_BASE(x)		((x) + 0x00010000)
+#define HDMI_TG_BASE(x)			((x) + 0x00050000)
+
+/* Control registers */
+#define HDMI_INTC_CON			HDMI_CTRL_BASE(0x0000)
+#define HDMI_INTC_FLAG			HDMI_CTRL_BASE(0x0004)
+#define HDMI_HPD_STATUS			HDMI_CTRL_BASE(0x000C)
+#define HDMI_PHY_RSTOUT			HDMI_CTRL_BASE(0x0014)
+#define HDMI_PHY_VPLL			HDMI_CTRL_BASE(0x0018)
+#define HDMI_PHY_CMU			HDMI_CTRL_BASE(0x001C)
+#define HDMI_CORE_RSTOUT		HDMI_CTRL_BASE(0x0020)
+
+/* Core registers */
+#define HDMI_CON_0			HDMI_CORE_BASE(0x0000)
+#define HDMI_CON_1			HDMI_CORE_BASE(0x0004)
+#define HDMI_CON_2			HDMI_CORE_BASE(0x0008)
+#define HDMI_SYS_STATUS			HDMI_CORE_BASE(0x0010)
+#define HDMI_PHY_STATUS			HDMI_CORE_BASE(0x0014)
+#define HDMI_STATUS_EN			HDMI_CORE_BASE(0x0020)
+#define HDMI_HPD			HDMI_CORE_BASE(0x0030)
+#define HDMI_MODE_SEL			HDMI_CORE_BASE(0x0040)
+#define HDMI_BLUE_SCREEN_0		HDMI_CORE_BASE(0x0050)
+#define HDMI_BLUE_SCREEN_1		HDMI_CORE_BASE(0x0054)
+#define HDMI_BLUE_SCREEN_2		HDMI_CORE_BASE(0x0058)
+#define HDMI_H_BLANK_0			HDMI_CORE_BASE(0x00A0)
+#define HDMI_H_BLANK_1			HDMI_CORE_BASE(0x00A4)
+#define HDMI_V_BLANK_0			HDMI_CORE_BASE(0x00B0)
+#define HDMI_V_BLANK_1			HDMI_CORE_BASE(0x00B4)
+#define HDMI_V_BLANK_2			HDMI_CORE_BASE(0x00B8)
+#define HDMI_H_V_LINE_0			HDMI_CORE_BASE(0x00C0)
+#define HDMI_H_V_LINE_1			HDMI_CORE_BASE(0x00C4)
+#define HDMI_H_V_LINE_2			HDMI_CORE_BASE(0x00C8)
+#define HDMI_VSYNC_POL			HDMI_CORE_BASE(0x00E4)
+#define HDMI_INT_PRO_MODE		HDMI_CORE_BASE(0x00E8)
+#define HDMI_V_BLANK_F_0		HDMI_CORE_BASE(0x0110)
+#define HDMI_V_BLANK_F_1		HDMI_CORE_BASE(0x0114)
+#define HDMI_V_BLANK_F_2		HDMI_CORE_BASE(0x0118)
+#define HDMI_H_SYNC_GEN_0		HDMI_CORE_BASE(0x0120)
+#define HDMI_H_SYNC_GEN_1		HDMI_CORE_BASE(0x0124)
+#define HDMI_H_SYNC_GEN_2		HDMI_CORE_BASE(0x0128)
+#define HDMI_V_SYNC_GEN_1_0		HDMI_CORE_BASE(0x0130)
+#define HDMI_V_SYNC_GEN_1_1		HDMI_CORE_BASE(0x0134)
+#define HDMI_V_SYNC_GEN_1_2		HDMI_CORE_BASE(0x0138)
+#define HDMI_V_SYNC_GEN_2_0		HDMI_CORE_BASE(0x0140)
+#define HDMI_V_SYNC_GEN_2_1		HDMI_CORE_BASE(0x0144)
+#define HDMI_V_SYNC_GEN_2_2		HDMI_CORE_BASE(0x0148)
+#define HDMI_V_SYNC_GEN_3_0		HDMI_CORE_BASE(0x0150)
+#define HDMI_V_SYNC_GEN_3_1		HDMI_CORE_BASE(0x0154)
+#define HDMI_V_SYNC_GEN_3_2		HDMI_CORE_BASE(0x0158)
+#define HDMI_AVI_CON			HDMI_CORE_BASE(0x0300)
+#define HDMI_AVI_BYTE(n)		HDMI_CORE_BASE(0x0320 + 4 * (n))
+#define	HDMI_DC_CONTROL			HDMI_CORE_BASE(0x05C0)
+#define HDMI_VIDEO_PATTERN_GEN		HDMI_CORE_BASE(0x05C4)
+#define HDMI_HPD_GEN			HDMI_CORE_BASE(0x05C8)
+
+/* Timing generator registers */
+#define HDMI_TG_CMD			HDMI_TG_BASE(0x0000)
+#define HDMI_TG_H_FSZ_L			HDMI_TG_BASE(0x0018)
+#define HDMI_TG_H_FSZ_H			HDMI_TG_BASE(0x001C)
+#define HDMI_TG_HACT_ST_L		HDMI_TG_BASE(0x0020)
+#define HDMI_TG_HACT_ST_H		HDMI_TG_BASE(0x0024)
+#define HDMI_TG_HACT_SZ_L		HDMI_TG_BASE(0x0028)
+#define HDMI_TG_HACT_SZ_H		HDMI_TG_BASE(0x002C)
+#define HDMI_TG_V_FSZ_L			HDMI_TG_BASE(0x0030)
+#define HDMI_TG_V_FSZ_H			HDMI_TG_BASE(0x0034)
+#define HDMI_TG_VSYNC_L			HDMI_TG_BASE(0x0038)
+#define HDMI_TG_VSYNC_H			HDMI_TG_BASE(0x003C)
+#define HDMI_TG_VSYNC2_L		HDMI_TG_BASE(0x0040)
+#define HDMI_TG_VSYNC2_H		HDMI_TG_BASE(0x0044)
+#define HDMI_TG_VACT_ST_L		HDMI_TG_BASE(0x0048)
+#define HDMI_TG_VACT_ST_H		HDMI_TG_BASE(0x004C)
+#define HDMI_TG_VACT_SZ_L		HDMI_TG_BASE(0x0050)
+#define HDMI_TG_VACT_SZ_H		HDMI_TG_BASE(0x0054)
+#define HDMI_TG_FIELD_CHG_L		HDMI_TG_BASE(0x0058)
+#define HDMI_TG_FIELD_CHG_H		HDMI_TG_BASE(0x005C)
+#define HDMI_TG_VACT_ST2_L		HDMI_TG_BASE(0x0060)
+#define HDMI_TG_VACT_ST2_H		HDMI_TG_BASE(0x0064)
+#define HDMI_TG_VSYNC_TOP_HDMI_L	HDMI_TG_BASE(0x0078)
+#define HDMI_TG_VSYNC_TOP_HDMI_H	HDMI_TG_BASE(0x007C)
+#define HDMI_TG_VSYNC_BOT_HDMI_L	HDMI_TG_BASE(0x0080)
+#define HDMI_TG_VSYNC_BOT_HDMI_H	HDMI_TG_BASE(0x0084)
+#define HDMI_TG_FIELD_TOP_HDMI_L	HDMI_TG_BASE(0x0088)
+#define HDMI_TG_FIELD_TOP_HDMI_H	HDMI_TG_BASE(0x008C)
+#define HDMI_TG_FIELD_BOT_HDMI_L	HDMI_TG_BASE(0x0090)
+#define HDMI_TG_FIELD_BOT_HDMI_H	HDMI_TG_BASE(0x0094)
+
+/*
+ * Bit definition part
+ */
+
+/* HDMI_INTC_CON */
+#define HDMI_INTC_EN_GLOBAL		(1 << 6)
+#define HDMI_INTC_EN_HPD_PLUG		(1 << 3)
+#define HDMI_INTC_EN_HPD_UNPLUG		(1 << 2)
+
+/* HDMI_INTC_FLAG */
+#define HDMI_INTC_FLAG_HPD_PLUG		(1 << 3)
+#define HDMI_INTC_FLAG_HPD_UNPLUG	(1 << 2)
+
+/* HDMI_PHY_RSTOUT */
+#define HDMI_PHY_SW_RSTOUT		(1 << 0)
+
+/* HDMI_CORE_RSTOUT */
+#define HDMI_CORE_SW_RSTOUT		(1 << 0)
+
+/* HDMI_CON_0 */
+#define HDMI_BLUE_SCR_EN		(1 << 5)
+#define HDMI_EN				(1 << 0)
+
+/* HDMI_PHY_STATUS */
+#define HDMI_PHY_STATUS_READY		(1 << 0)
+
+/* HDMI_MODE_SEL */
+#define HDMI_MODE_HDMI_EN		(1 << 1)
+#define HDMI_MODE_DVI_EN		(1 << 0)
+#define HDMI_MODE_MASK			(3 << 0)
+
+/* HDMI_TG_CMD */
+#define HDMI_TG_EN			(1 << 0)
+
+#endif /* SAMSUNG_REGS_HDMI_H */
diff --git a/drivers/media/video/s5p-tv/regs-mixer.h b/drivers/media/video/s5p-tv/regs-mixer.h
new file mode 100644
index 0000000..3c84426
--- /dev/null
+++ b/drivers/media/video/s5p-tv/regs-mixer.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Mixer register header file for Samsung Mixer driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+#ifndef SAMSUNG_REGS_MIXER_H
+#define SAMSUNG_REGS_MIXER_H
+
+/*
+ * Register part
+ */
+#define MXR_STATUS			0x0000
+#define MXR_CFG				0x0004
+#define MXR_INT_EN			0x0008
+#define MXR_INT_STATUS			0x000C
+#define MXR_LAYER_CFG			0x0010
+#define MXR_VIDEO_CFG			0x0014
+#define MXR_GRAPHIC0_CFG		0x0020
+#define MXR_GRAPHIC0_BASE		0x0024
+#define MXR_GRAPHIC0_SPAN		0x0028
+#define MXR_GRAPHIC0_SXY		0x002C
+#define MXR_GRAPHIC0_WH			0x0030
+#define MXR_GRAPHIC0_DXY		0x0034
+#define MXR_GRAPHIC0_BLANK		0x0038
+#define MXR_GRAPHIC1_CFG		0x0040
+#define MXR_GRAPHIC1_BASE		0x0044
+#define MXR_GRAPHIC1_SPAN		0x0048
+#define MXR_GRAPHIC1_SXY		0x004C
+#define MXR_GRAPHIC1_WH			0x0050
+#define MXR_GRAPHIC1_DXY		0x0054
+#define MXR_GRAPHIC1_BLANK		0x0058
+#define MXR_BG_CFG			0x0060
+#define MXR_BG_COLOR0			0x0064
+#define MXR_BG_COLOR1			0x0068
+#define MXR_BG_COLOR2			0x006C
+
+/* for parametrized access to layer registers */
+#define MXR_GRAPHIC_CFG(i)		(0x0020 + (i) * 0x20)
+#define MXR_GRAPHIC_BASE(i)		(0x0024 + (i) * 0x20)
+#define MXR_GRAPHIC_SPAN(i)		(0x0028 + (i) * 0x20)
+#define MXR_GRAPHIC_SXY(i)		(0x002C + (i) * 0x20)
+#define MXR_GRAPHIC_WH(i)		(0x0030 + (i) * 0x20)
+#define MXR_GRAPHIC_DXY(i)		(0x0034 + (i) * 0x20)
+
+/*
+ * Bit definition part
+ */
+
+/* generates mask for range of bits */
+#define MXR_MASK(high_bit, low_bit) \
+	(((2 << ((high_bit) - (low_bit))) - 1) << (low_bit))
+
+#define MXR_MASK_VAL(val, high_bit, low_bit) \
+	(((val) << (low_bit)) & MXR_MASK(high_bit, low_bit))
+
+/* bits for MXR_STATUS */
+#define MXR_STATUS_16_BURST		(1 << 7)
+#define MXR_STATUS_BURST_MASK		(1 << 7)
+#define MXR_STATUS_SYNC_ENABLE		(1 << 2)
+#define MXR_STATUS_REG_RUN		(1 << 0)
+
+/* bits for MXR_CFG */
+#define MXR_CFG_OUT_YUV444		(0 << 8)
+#define MXR_CFG_OUT_RGB888		(1 << 8)
+#define MXR_CFG_DST_SDO			(0 << 7)
+#define MXR_CFG_DST_HDMI		(1 << 7)
+#define MXR_CFG_DST_MASK		(1 << 7)
+#define MXR_CFG_SCAN_HD_720		(0 << 6)
+#define MXR_CFG_SCAN_HD_1080		(1 << 6)
+#define MXR_CFG_GRP1_ENABLE		(1 << 5)
+#define MXR_CFG_GRP0_ENABLE		(1 << 4)
+#define MXR_CFG_VP_ENABLE		(1 << 3)
+#define MXR_CFG_SCAN_INTERLACE		(0 << 2)
+#define MXR_CFG_SCAN_PROGRASSIVE	(1 << 2)
+#define MXR_CFG_SCAN_NTSC		(0 << 1)
+#define MXR_CFG_SCAN_PAL		(1 << 1)
+#define MXR_CFG_SCAN_SD			(0 << 0)
+#define MXR_CFG_SCAN_HD			(1 << 0)
+#define MXR_CFG_SCAN_MASK		0x47
+
+/* bits for MXR_GRAPHICn_CFG */
+#define MXR_GRP_CFG_COLOR_KEY_DISABLE	(1 << 21)
+#define MXR_GRP_CFG_BLEND_PRE_MUL	(1 << 20)
+#define MXR_GRP_CFG_FORMAT_VAL(x)	MXR_MASK_VAL(x, 11, 8)
+#define MXR_GRP_CFG_FORMAT_MASK		MXR_GRP_CFG_FORMAT_VAL(~0)
+#define MXR_GRP_CFG_ALPHA_VAL(x)	MXR_MASK_VAL(x, 7, 0)
+
+/* bits for MXR_GRAPHICn_WH */
+#define MXR_GRP_WH_H_SCALE(x)		MXR_MASK_VAL(x, 28, 28)
+#define MXR_GRP_WH_V_SCALE(x)		MXR_MASK_VAL(x, 12, 12)
+#define MXR_GRP_WH_WIDTH(x)		MXR_MASK_VAL(x, 26, 16)
+#define MXR_GRP_WH_HEIGHT(x)		MXR_MASK_VAL(x, 10, 0)
+
+/* bits for MXR_GRAPHICn_SXY */
+#define MXR_GRP_SXY_SX(x)		MXR_MASK_VAL(x, 26, 16)
+#define MXR_GRP_SXY_SY(x)		MXR_MASK_VAL(x, 10, 0)
+
+/* bits for MXR_GRAPHICn_DXY */
+#define MXR_GRP_DXY_DX(x)		MXR_MASK_VAL(x, 26, 16)
+#define MXR_GRP_DXY_DY(x)		MXR_MASK_VAL(x, 10, 0)
+
+/* bits for MXR_INT_EN */
+#define MXR_INT_EN_VSYNC		(1 << 11)
+#define MXR_INT_EN_ALL			(0x0f << 8)
+
+/* bit for MXR_INT_STATUS */
+#define MXR_INT_CLEAR_VSYNC		(1 << 11)
+#define MXR_INT_STATUS_VSYNC		(1 << 0)
+
+/* bit for MXR_LAYER_CFG */
+#define MXR_LAYER_CFG_GRP1_VAL(x)	MXR_MASK_VAL(x, 11, 8)
+#define MXR_LAYER_CFG_GRP0_VAL(x)	MXR_MASK_VAL(x, 7, 4)
+#define MXR_LAYER_CFG_VP_VAL(x)		MXR_MASK_VAL(x, 3, 0)
+
+#endif /* SAMSUNG_REGS_MIXER_H */
+
diff --git a/drivers/media/video/s5p-tv/regs-sdo.h b/drivers/media/video/s5p-tv/regs-sdo.h
new file mode 100644
index 0000000..7f7c2b8a
--- /dev/null
+++ b/drivers/media/video/s5p-tv/regs-sdo.h
@@ -0,0 +1,63 @@
+/* drivers/media/video/s5p-tv/regs-sdo.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * SDO register description file
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SAMSUNG_REGS_SDO_H
+#define SAMSUNG_REGS_SDO_H
+
+/*
+ * Register part
+ */
+
+#define SDO_CLKCON			0x0000
+#define SDO_CONFIG			0x0008
+#define SDO_VBI				0x0014
+#define SDO_DAC				0x003C
+#define SDO_CCCON			0x0180
+#define SDO_IRQ				0x0280
+#define SDO_IRQMASK			0x0284
+#define SDO_VERSION			0x03D8
+
+/*
+ * Bit definition part
+ */
+
+/* SDO Clock Control Register (SDO_CLKCON) */
+#define SDO_TVOUT_SW_RESET		(1 << 4)
+#define SDO_TVOUT_CLOCK_READY		(1 << 1)
+#define SDO_TVOUT_CLOCK_ON		(1 << 0)
+
+/* SDO Video Standard Configuration Register (SDO_CONFIG) */
+#define SDO_PROGRESSIVE			(1 << 4)
+#define SDO_NTSC_M			0
+#define SDO_PAL_M			1
+#define SDO_PAL_BGHID			2
+#define SDO_PAL_N			3
+#define SDO_PAL_NC			4
+#define SDO_NTSC_443			8
+#define SDO_PAL_60			9
+#define SDO_STANDARD_MASK		0xf
+
+/* SDO VBI Configuration Register (SDO_VBI) */
+#define SDO_CVBS_WSS_INS		(1 << 14)
+#define SDO_CVBS_CLOSED_CAPTION_MASK	(3 << 12)
+
+/* SDO DAC Configuration Register (SDO_DAC) */
+#define SDO_POWER_ON_DAC		(1 << 0)
+
+/* SDO Color Compensation On/Off Control (SDO_CCCON) */
+#define SDO_COMPENSATION_BHS_ADJ_OFF	(1 << 4)
+#define SDO_COMPENSATION_CVBS_COMP_OFF	(1 << 0)
+
+/* SDO Interrupt Request Register (SDO_IRQ) */
+#define SDO_VSYNC_IRQ_PEND		(1 << 0)
+
+#endif /* SAMSUNG_REGS_SDO_H */
diff --git a/drivers/media/video/s5p-tv/regs-vp.h b/drivers/media/video/s5p-tv/regs-vp.h
new file mode 100644
index 0000000..6c63984
--- /dev/null
+++ b/drivers/media/video/s5p-tv/regs-vp.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Video processor register header file for Samsung Mixer driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SAMSUNG_REGS_VP_H
+#define SAMSUNG_REGS_VP_H
+
+/*
+ * Register part
+ */
+
+#define VP_ENABLE			0x0000
+#define VP_SRESET			0x0004
+#define VP_SHADOW_UPDATE		0x0008
+#define VP_FIELD_ID			0x000C
+#define VP_MODE				0x0010
+#define VP_IMG_SIZE_Y			0x0014
+#define VP_IMG_SIZE_C			0x0018
+#define VP_PER_RATE_CTRL		0x001C
+#define VP_TOP_Y_PTR			0x0028
+#define VP_BOT_Y_PTR			0x002C
+#define VP_TOP_C_PTR			0x0030
+#define VP_BOT_C_PTR			0x0034
+#define VP_ENDIAN_MODE			0x03CC
+#define VP_SRC_H_POSITION		0x0044
+#define VP_SRC_V_POSITION		0x0048
+#define VP_SRC_WIDTH			0x004C
+#define VP_SRC_HEIGHT			0x0050
+#define VP_DST_H_POSITION		0x0054
+#define VP_DST_V_POSITION		0x0058
+#define VP_DST_WIDTH			0x005C
+#define VP_DST_HEIGHT			0x0060
+#define VP_H_RATIO			0x0064
+#define VP_V_RATIO			0x0068
+#define VP_POLY8_Y0_LL			0x006C
+#define VP_POLY4_Y0_LL			0x00EC
+#define VP_POLY4_C0_LL			0x012C
+
+/*
+ * Bit definition part
+ */
+
+/* generates mask for range of bits */
+
+#define VP_MASK(high_bit, low_bit) \
+	(((2 << ((high_bit) - (low_bit))) - 1) << (low_bit))
+
+#define VP_MASK_VAL(val, high_bit, low_bit) \
+	(((val) << (low_bit)) & VP_MASK(high_bit, low_bit))
+
+ /* VP_ENABLE */
+#define VP_ENABLE_ON			(1 << 0)
+
+/* VP_SRESET */
+#define VP_SRESET_PROCESSING		(1 << 0)
+
+/* VP_SHADOW_UPDATE */
+#define VP_SHADOW_UPDATE_ENABLE		(1 << 0)
+
+/* VP_MODE */
+#define VP_MODE_NV12			(0 << 6)
+#define VP_MODE_NV21			(1 << 6)
+#define VP_MODE_LINE_SKIP		(1 << 5)
+#define VP_MODE_MEM_LINEAR		(0 << 4)
+#define VP_MODE_MEM_TILED		(1 << 4)
+#define VP_MODE_FMT_MASK		(5 << 4)
+#define VP_MODE_FIELD_ID_AUTO_TOGGLING	(1 << 2)
+#define VP_MODE_2D_IPC			(1 << 1)
+
+/* VP_IMG_SIZE_Y */
+/* VP_IMG_SIZE_C */
+#define VP_IMG_HSIZE(x)			VP_MASK_VAL(x, 29, 16)
+#define VP_IMG_VSIZE(x)			VP_MASK_VAL(x, 13, 0)
+
+/* VP_SRC_H_POSITION */
+#define VP_SRC_H_POSITION_VAL(x)	VP_MASK_VAL(x, 14, 4)
+
+/* VP_ENDIAN_MODE */
+#define VP_ENDIAN_MODE_LITTLE		(1 << 0)
+
+#endif /* SAMSUNG_REGS_VP_H */
diff --git a/drivers/media/video/s5p-tv/sdo_drv.c b/drivers/media/video/s5p-tv/sdo_drv.c
new file mode 100644
index 0000000..4dddd6b
--- /dev/null
+++ b/drivers/media/video/s5p-tv/sdo_drv.c
@@ -0,0 +1,479 @@
+/*
+ * Samsung Standard Definition Output (SDO) driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-subdev.h>
+
+#include "regs-sdo.h"
+
+MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>");
+MODULE_DESCRIPTION("Samsung Standard Definition Output (SDO)");
+MODULE_LICENSE("GPL");
+
+#define SDO_DEFAULT_STD	V4L2_STD_PAL
+
+struct sdo_format {
+	v4l2_std_id id;
+	/* all modes are 720 pixels wide */
+	unsigned int height;
+	unsigned int cookie;
+};
+
+struct sdo_device {
+	/** pointer to device parent */
+	struct device *dev;
+	/** base address of SDO registers */
+	void __iomem *regs;
+	/** SDO interrupt */
+	unsigned int irq;
+	/** DAC source clock */
+	struct clk *sclk_dac;
+	/** DAC clock */
+	struct clk *dac;
+	/** DAC physical interface */
+	struct clk *dacphy;
+	/** clock for control of VPLL */
+	struct clk *fout_vpll;
+	/** regulator for SDO IP power */
+	struct regulator *vdac;
+	/** regulator for SDO plug detection */
+	struct regulator *vdet;
+	/** subdev used as device interface */
+	struct v4l2_subdev sd;
+	/** current format */
+	const struct sdo_format *fmt;
+};
+
+static inline struct sdo_device *sd_to_sdev(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct sdo_device, sd);
+}
+
+static inline
+void sdo_write_mask(struct sdo_device *sdev, u32 reg_id, u32 value, u32 mask)
+{
+	u32 old = readl(sdev->regs + reg_id);
+	value = (value & mask) | (old & ~mask);
+	writel(value, sdev->regs + reg_id);
+}
+
+static inline
+void sdo_write(struct sdo_device *sdev, u32 reg_id, u32 value)
+{
+	writel(value, sdev->regs + reg_id);
+}
+
+static inline
+u32 sdo_read(struct sdo_device *sdev, u32 reg_id)
+{
+	return readl(sdev->regs + reg_id);
+}
+
+static irqreturn_t sdo_irq_handler(int irq, void *dev_data)
+{
+	struct sdo_device *sdev = dev_data;
+
+	/* clear interrupt */
+	sdo_write_mask(sdev, SDO_IRQ, ~0, SDO_VSYNC_IRQ_PEND);
+	return IRQ_HANDLED;
+}
+
+static void sdo_reg_debug(struct sdo_device *sdev)
+{
+#define DBGREG(reg_id) \
+	dev_info(sdev->dev, #reg_id " = %08x\n", \
+		sdo_read(sdev, reg_id))
+
+	DBGREG(SDO_CLKCON);
+	DBGREG(SDO_CONFIG);
+	DBGREG(SDO_VBI);
+	DBGREG(SDO_DAC);
+	DBGREG(SDO_IRQ);
+	DBGREG(SDO_IRQMASK);
+	DBGREG(SDO_VERSION);
+}
+
+static const struct sdo_format sdo_format[] = {
+	{ V4L2_STD_PAL_N,	.height = 576, .cookie = SDO_PAL_N },
+	{ V4L2_STD_PAL_Nc,	.height = 576, .cookie = SDO_PAL_NC },
+	{ V4L2_STD_PAL_M,	.height = 480, .cookie = SDO_PAL_M },
+	{ V4L2_STD_PAL_60,	.height = 480, .cookie = SDO_PAL_60 },
+	{ V4L2_STD_NTSC_443,	.height = 480, .cookie = SDO_NTSC_443 },
+	{ V4L2_STD_PAL,		.height = 576, .cookie = SDO_PAL_BGHID },
+	{ V4L2_STD_NTSC_M,	.height = 480, .cookie = SDO_NTSC_M },
+};
+
+static const struct sdo_format *sdo_find_format(v4l2_std_id id)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(sdo_format); ++i)
+		if (sdo_format[i].id & id)
+			return &sdo_format[i];
+	return NULL;
+}
+
+static int sdo_g_tvnorms_output(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+	*std = V4L2_STD_NTSC_M | V4L2_STD_PAL_M | V4L2_STD_PAL |
+		V4L2_STD_PAL_N | V4L2_STD_PAL_Nc |
+		V4L2_STD_NTSC_443 | V4L2_STD_PAL_60;
+	return 0;
+}
+
+static int sdo_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+	const struct sdo_format *fmt;
+	fmt = sdo_find_format(std);
+	if (fmt == NULL)
+		return -EINVAL;
+	sdev->fmt = fmt;
+	return 0;
+}
+
+static int sdo_g_std_output(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+	*std = sd_to_sdev(sd)->fmt->id;
+	return 0;
+}
+
+static int sdo_g_mbus_fmt(struct v4l2_subdev *sd,
+	struct v4l2_mbus_framefmt *fmt)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	if (!sdev->fmt)
+		return -ENXIO;
+	/* all modes are 720 pixels wide */
+	fmt->width = 720;
+	fmt->height = sdev->fmt->height;
+	fmt->code = V4L2_MBUS_FMT_FIXED;
+	fmt->field = V4L2_FIELD_INTERLACED;
+	return 0;
+}
+
+static int sdo_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+	struct device *dev = sdev->dev;
+	int ret;
+
+	dev_info(dev, "sdo_s_power(%d)\n", on);
+
+	if (on)
+		ret = pm_runtime_get_sync(dev);
+	else
+		ret = pm_runtime_put_sync(dev);
+
+	/* only values < 0 indicate errors */
+	return IS_ERR_VALUE(ret) ? ret : 0;
+}
+
+static int sdo_streamon(struct sdo_device *sdev)
+{
+	/* set proper clock for Timing Generator */
+	clk_set_rate(sdev->fout_vpll, 54000000);
+	dev_info(sdev->dev, "fout_vpll.rate = %lu\n",
+	clk_get_rate(sdev->fout_vpll));
+	/* enable clock in SDO */
+	sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON);
+	clk_enable(sdev->dacphy);
+	/* enable DAC */
+	sdo_write_mask(sdev, SDO_DAC, ~0, SDO_POWER_ON_DAC);
+	sdo_reg_debug(sdev);
+	return 0;
+}
+
+static int sdo_streamoff(struct sdo_device *sdev)
+{
+	int tries;
+
+	sdo_write_mask(sdev, SDO_DAC, 0, SDO_POWER_ON_DAC);
+	clk_disable(sdev->dacphy);
+	sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON);
+	for (tries = 100; tries; --tries) {
+		if (sdo_read(sdev, SDO_CLKCON) & SDO_TVOUT_CLOCK_READY)
+			break;
+		mdelay(1);
+	}
+	if (tries == 0)
+		dev_err(sdev->dev, "failed to stop streaming\n");
+	return tries ? 0 : -EIO;
+}
+
+static int sdo_s_stream(struct v4l2_subdev *sd, int on)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+	return on ? sdo_streamon(sdev) : sdo_streamoff(sdev);
+}
+
+static const struct v4l2_subdev_core_ops sdo_sd_core_ops = {
+	.s_power = sdo_s_power,
+};
+
+static const struct v4l2_subdev_video_ops sdo_sd_video_ops = {
+	.s_std_output = sdo_s_std_output,
+	.g_std_output = sdo_g_std_output,
+	.g_tvnorms_output = sdo_g_tvnorms_output,
+	.g_mbus_fmt = sdo_g_mbus_fmt,
+	.s_stream = sdo_s_stream,
+};
+
+static const struct v4l2_subdev_ops sdo_sd_ops = {
+	.core = &sdo_sd_core_ops,
+	.video = &sdo_sd_video_ops,
+};
+
+static int sdo_runtime_suspend(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	dev_info(dev, "suspend\n");
+	regulator_disable(sdev->vdet);
+	regulator_disable(sdev->vdac);
+	clk_disable(sdev->sclk_dac);
+	return 0;
+}
+
+static int sdo_runtime_resume(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	dev_info(dev, "resume\n");
+	clk_enable(sdev->sclk_dac);
+	regulator_enable(sdev->vdac);
+	regulator_enable(sdev->vdet);
+
+	/* software reset */
+	sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_SW_RESET);
+	mdelay(10);
+	sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_SW_RESET);
+
+	/* setting TV mode */
+	sdo_write_mask(sdev, SDO_CONFIG, sdev->fmt->cookie, SDO_STANDARD_MASK);
+	/* XXX: forcing interlaced mode using undocumented bit */
+	sdo_write_mask(sdev, SDO_CONFIG, 0, SDO_PROGRESSIVE);
+	/* turn all VBI off */
+	sdo_write_mask(sdev, SDO_VBI, 0, SDO_CVBS_WSS_INS |
+		SDO_CVBS_CLOSED_CAPTION_MASK);
+	/* turn all post processing off */
+	sdo_write_mask(sdev, SDO_CCCON, ~0, SDO_COMPENSATION_BHS_ADJ_OFF |
+		SDO_COMPENSATION_CVBS_COMP_OFF);
+	sdo_reg_debug(sdev);
+	return 0;
+}
+
+static const struct dev_pm_ops sdo_pm_ops = {
+	.runtime_suspend = sdo_runtime_suspend,
+	.runtime_resume	 = sdo_runtime_resume,
+};
+
+static int __devinit sdo_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sdo_device *sdev;
+	struct resource *res;
+	int ret = 0;
+	struct clk *sclk_vpll;
+
+	dev_info(dev, "probe start\n");
+	sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
+	if (!sdev) {
+		dev_err(dev, "not enough memory.\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+	sdev->dev = dev;
+
+	/* mapping registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "get memory resource failed.\n");
+		ret = -ENXIO;
+		goto fail_sdev;
+	}
+
+	sdev->regs = ioremap(res->start, resource_size(res));
+	if (sdev->regs == NULL) {
+		dev_err(dev, "register mapping failed.\n");
+		ret = -ENXIO;
+		goto fail_sdev;
+	}
+
+	/* acquiring interrupt */
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		dev_err(dev, "get interrupt resource failed.\n");
+		ret = -ENXIO;
+		goto fail_regs;
+	}
+	ret = request_irq(res->start, sdo_irq_handler, 0, "s5p-sdo", sdev);
+	if (ret) {
+		dev_err(dev, "request interrupt failed.\n");
+		goto fail_regs;
+	}
+	sdev->irq = res->start;
+
+	/* acquire clocks */
+	sdev->sclk_dac = clk_get(dev, "sclk_dac");
+	if (IS_ERR_OR_NULL(sdev->sclk_dac)) {
+		dev_err(dev, "failed to get clock 'sclk_dac'\n");
+		ret = -ENXIO;
+		goto fail_irq;
+	}
+	sdev->dac = clk_get(dev, "dac");
+	if (IS_ERR_OR_NULL(sdev->dac)) {
+		dev_err(dev, "failed to get clock 'dac'\n");
+		ret = -ENXIO;
+		goto fail_sclk_dac;
+	}
+	sdev->dacphy = clk_get(dev, "dacphy");
+	if (IS_ERR_OR_NULL(sdev->dacphy)) {
+		dev_err(dev, "failed to get clock 'dacphy'\n");
+		ret = -ENXIO;
+		goto fail_dac;
+	}
+	sclk_vpll = clk_get(dev, "sclk_vpll");
+	if (IS_ERR_OR_NULL(sclk_vpll)) {
+		dev_err(dev, "failed to get clock 'sclk_vpll'\n");
+		ret = -ENXIO;
+		goto fail_dacphy;
+	}
+	clk_set_parent(sdev->sclk_dac, sclk_vpll);
+	clk_put(sclk_vpll);
+	sdev->fout_vpll = clk_get(dev, "fout_vpll");
+	if (IS_ERR_OR_NULL(sdev->fout_vpll)) {
+		dev_err(dev, "failed to get clock 'fout_vpll'\n");
+		goto fail_dacphy;
+	}
+	dev_info(dev, "fout_vpll.rate = %lu\n", clk_get_rate(sclk_vpll));
+
+	/* acquire regulator */
+	sdev->vdac = regulator_get(dev, "vdd33a_dac");
+	if (IS_ERR_OR_NULL(sdev->vdac)) {
+		dev_err(dev, "failed to get regulator 'vdac'\n");
+		goto fail_fout_vpll;
+	}
+	sdev->vdet = regulator_get(dev, "vdet");
+	if (IS_ERR_OR_NULL(sdev->vdet)) {
+		dev_err(dev, "failed to get regulator 'vdet'\n");
+		goto fail_vdac;
+	}
+
+	/* enable gate for dac clock, because mixer uses it */
+	clk_enable(sdev->dac);
+
+	/* configure power management */
+	pm_runtime_enable(dev);
+
+	/* configuration of interface subdevice */
+	v4l2_subdev_init(&sdev->sd, &sdo_sd_ops);
+	sdev->sd.owner = THIS_MODULE;
+	strlcpy(sdev->sd.name, "s5p-sdo", sizeof sdev->sd.name);
+
+	/* set default format */
+	sdev->fmt = sdo_find_format(SDO_DEFAULT_STD);
+	BUG_ON(sdev->fmt == NULL);
+
+	/* keeping subdev in device's private for use by other drivers */
+	dev_set_drvdata(dev, &sdev->sd);
+
+	dev_info(dev, "probe succeeded\n");
+	return 0;
+
+fail_vdac:
+	regulator_put(sdev->vdac);
+fail_fout_vpll:
+	clk_put(sdev->fout_vpll);
+fail_dacphy:
+	clk_put(sdev->dacphy);
+fail_dac:
+	clk_put(sdev->dac);
+fail_sclk_dac:
+	clk_put(sdev->sclk_dac);
+fail_irq:
+	free_irq(sdev->irq, sdev);
+fail_regs:
+	iounmap(sdev->regs);
+fail_sdev:
+	kfree(sdev);
+fail:
+	dev_info(dev, "probe failed\n");
+	return ret;
+}
+
+static int __devexit sdo_remove(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	pm_runtime_disable(&pdev->dev);
+	clk_disable(sdev->dac);
+	regulator_put(sdev->vdet);
+	regulator_put(sdev->vdac);
+	clk_put(sdev->fout_vpll);
+	clk_put(sdev->dacphy);
+	clk_put(sdev->dac);
+	clk_put(sdev->sclk_dac);
+	free_irq(sdev->irq, sdev);
+	iounmap(sdev->regs);
+	kfree(sdev);
+
+	dev_info(&pdev->dev, "remove successful\n");
+	return 0;
+}
+
+static struct platform_driver sdo_driver __refdata = {
+	.probe = sdo_probe,
+	.remove = __devexit_p(sdo_remove),
+	.driver = {
+		.name = "s5p-sdo",
+		.owner = THIS_MODULE,
+		.pm = &sdo_pm_ops,
+	}
+};
+
+static int __init sdo_init(void)
+{
+	int ret;
+	static const char banner[] __initdata = KERN_INFO \
+		"Samsung Standard Definition Output (SDO) driver, "
+		"(c) 2010-2011 Samsung Electronics Co., Ltd.\n";
+	printk(banner);
+
+	ret = platform_driver_register(&sdo_driver);
+	if (ret)
+		printk(KERN_ERR "SDO platform driver register failed\n");
+
+	return ret;
+}
+module_init(sdo_init);
+
+static void __exit sdo_exit(void)
+{
+	platform_driver_unregister(&sdo_driver);
+}
+module_exit(sdo_exit);
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 0db9092..f2ae405 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -757,8 +757,8 @@ static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 	switch (ctrl->id) {
 	case V4L2_CID_CHROMA_AGC:
 		/* chroma gain cluster */
-		if (state->agc->cur.val)
-			state->gain->cur.val =
+		if (state->agc->val)
+			state->gain->val =
 				saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f;
 		break;
 	}
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index e2062b2..0f9fb99 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -4951,8 +4951,9 @@ struct saa7134_board saa7134_boards[] = {
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_XC2028,
 		.radio_type     = UNSET,
-		.tuner_addr	= ADDR_UNSET,
+		.tuner_addr	= 0x61,
 		.radio_addr	= ADDR_UNSET,
+		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs = {{
 			.name   = name_tv,
 			.vmux   = 3,
@@ -6992,6 +6993,11 @@ static int saa7134_xc2028_callback(struct saa7134_dev *dev,
 			msleep(10);
 			saa7134_set_gpio(dev, 18, 1);
 		break;
+		case SAA7134_BOARD_VIDEOMATE_T750:
+			saa7134_set_gpio(dev, 20, 0);
+			msleep(10);
+			saa7134_set_gpio(dev, 20, 1);
+		break;
 		}
 	return 0;
 	}
@@ -7451,6 +7457,11 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x0e050000, 0x0c050000);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0e050000, 0x0c050000);
 		break;
+	case SAA7134_BOARD_VIDEOMATE_T750:
+		/* enable the analog tuner */
+		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00008000, 0x00008000);
+		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
+		break;
 	}
 	return 0;
 }
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index f9be737..ca65cda 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -39,6 +39,8 @@
 MODULE_DESCRIPTION("v4l2 driver module for saa7130/34 based TV cards");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(SAA7134_VERSION);
+
 
 /* ------------------------------------------------------------------ */
 
@@ -1332,14 +1334,8 @@ static struct pci_driver saa7134_pci_driver = {
 static int __init saa7134_init(void)
 {
 	INIT_LIST_HEAD(&saa7134_devlist);
-	printk(KERN_INFO "saa7130/34: v4l2 driver version %d.%d.%d loaded\n",
-	       (SAA7134_VERSION_CODE >> 16) & 0xff,
-	       (SAA7134_VERSION_CODE >>  8) & 0xff,
-	       SAA7134_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "saa7130/34: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "saa7130/34: v4l2 driver version %s loaded\n",
+	       SAA7134_VERSION);
 	return pci_register_driver(&saa7134_pci_driver);
 }
 
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 996a206..1e4ef16 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -56,6 +56,7 @@
 #include "lgs8gxx.h"
 
 #include "zl10353.h"
+#include "qt1010.h"
 
 #include "zl10036.h"
 #include "zl10039.h"
@@ -939,6 +940,18 @@ static struct zl10353_config behold_x7_config = {
 	.disable_i2c_gate_ctrl = 1,
 };
 
+static struct zl10353_config videomate_t750_zl10353_config = {
+	.demod_address         = 0x0f,
+	.no_tuner              = 1,
+	.parallel_ts           = 1,
+	.disable_i2c_gate_ctrl = 1,
+};
+
+static struct qt1010_config videomate_t750_qt1010_config = {
+	.i2c_address = 0x62
+};
+
+
 /* ==================================================================
  * tda10086 based DVB-S cards, helper functions
  */
@@ -1650,6 +1663,18 @@ static int dvb_init(struct saa7134_dev *dev)
 					__func__);
 
 		break;
+	case SAA7134_BOARD_VIDEOMATE_T750:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+						&videomate_t750_zl10353_config,
+						&dev->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			if (dvb_attach(qt1010_attach,
+					fe0->dvb.frontend,
+					&dev->i2c_adap,
+					&videomate_t750_qt1010_config) == NULL)
+				wprintk("error attaching QT1010\n");
+		}
+		break;
 	case SAA7134_BOARD_ZOLID_HYBRID_PCI:
 		fe0->dvb.frontend = dvb_attach(tda10048_attach,
 					       &zolid_tda10048_config,
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 18294db..dde361a 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -172,7 +172,6 @@ static int empress_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, saa7134_boards[dev->board].name,
 		sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
-	cap->version = SAA7134_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_READWRITE |
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index 776ba2d..9cf7914f 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1810,7 +1810,6 @@ static int saa7134_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, saa7134_boards[dev->board].name,
 		sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
-	cap->version = SAA7134_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_VBI_CAPTURE |
@@ -2307,7 +2306,6 @@ static int radio_querycap(struct file *file, void *priv,
 	strcpy(cap->driver, "saa7134");
 	strlcpy(cap->card, saa7134_boards[dev->board].name, sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
-	cap->version = SAA7134_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 28eb103..bc8d6bb 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -19,8 +19,7 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/version.h>
-#define SAA7134_VERSION_CODE KERNEL_VERSION(0, 2, 16)
+#define SAA7134_VERSION "0, 2, 17"
 
 #include <linux/pci.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c
index 4003645..2fd38a0 100644
--- a/drivers/media/video/saa7164/saa7164-encoder.c
+++ b/drivers/media/video/saa7164/saa7164-encoder.c
@@ -1246,7 +1246,6 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 	struct saa7164_encoder_fh *fh =
 		(struct saa7164_encoder_fh *)file->private_data;
 	struct saa7164_port *port = fh->port;
-	struct saa7164_user_buffer *ubuf;
 	unsigned int mask = 0;
 
 	port->last_poll_msecs_diff = port->last_poll_msecs;
@@ -1278,10 +1277,7 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 	}
 
 	/* Pull the first buffer from the used list */
-	ubuf = list_first_entry(&port->list_buf_used.list,
-		struct saa7164_user_buffer, list);
-
-	if (ubuf)
+	if (!list_empty(&port->list_buf_used.list))
 		mask |= POLLIN | POLLRDNORM;
 
 	return mask;
diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c
index bc1fced..e2e0341 100644
--- a/drivers/media/video/saa7164/saa7164-vbi.c
+++ b/drivers/media/video/saa7164/saa7164-vbi.c
@@ -1192,7 +1192,6 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 {
 	struct saa7164_vbi_fh *fh = (struct saa7164_vbi_fh *)file->private_data;
 	struct saa7164_port *port = fh->port;
-	struct saa7164_user_buffer *ubuf;
 	unsigned int mask = 0;
 
 	port->last_poll_msecs_diff = port->last_poll_msecs;
@@ -1224,10 +1223,7 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 	}
 
 	/* Pull the first buffer from the used list */
-	ubuf = list_first_entry(&port->list_buf_used.list,
-		struct saa7164_user_buffer, list);
-
-	if (ubuf)
+	if (!list_empty(&port->list_buf_used.list))
 		mask |= POLLIN | POLLRDNORM;
 
 	return mask;
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 16745d2..6678bf1 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -48,7 +48,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/kdev_t.h>
-#include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/crc32.h>
 #include <linux/kthread.h>
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 3ae5c9c..e540898 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -27,7 +27,6 @@
 #include <linux/mm.h>
 #include <linux/moduleparam.h>
 #include <linux/time.h>
-#include <linux/version.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
@@ -39,6 +38,7 @@
 #include <media/v4l2-dev.h>
 #include <media/soc_camera.h>
 #include <media/sh_mobile_ceu.h>
+#include <media/sh_mobile_csi2.h>
 #include <media/videobuf2-dma-contig.h>
 #include <media/v4l2-mediabus.h>
 #include <media/soc_mediabus.h>
@@ -96,6 +96,7 @@ struct sh_mobile_ceu_buffer {
 struct sh_mobile_ceu_dev {
 	struct soc_camera_host ici;
 	struct soc_camera_device *icd;
+	struct platform_device *csi2_pdev;
 
 	unsigned int irq;
 	void __iomem *base;
@@ -205,7 +206,7 @@ static int sh_mobile_ceu_soft_reset(struct sh_mobile_ceu_dev *pcdev)
 
 
 	if (2 != success) {
-		dev_warn(&icd->dev, "soft reset time out\n");
+		dev_warn(icd->pdev, "soft reset time out\n");
 		return -EIO;
 	}
 
@@ -220,7 +221,7 @@ static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq,
 			unsigned long sizes[], void *alloc_ctxs[])
 {
 	struct soc_camera_device *icd = container_of(vq, struct soc_camera_device, vb2_vidq);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
 						icd->current_fmt->host_fmt);
@@ -242,7 +243,7 @@ static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq,
 			*count = pcdev->video_limit / PAGE_ALIGN(sizes[0]);
 	}
 
-	dev_dbg(icd->dev.parent, "count=%d, size=%lu\n", *count, sizes[0]);
+	dev_dbg(icd->parent, "count=%d, size=%lu\n", *count, sizes[0]);
 
 	return 0;
 }
@@ -351,7 +352,7 @@ static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb)
 
 	buf = to_ceu_vb(vb);
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
 		vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
 
 	/* Added list head initialization on alloc */
@@ -371,7 +372,7 @@ static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb)
 	size = icd->user_height * bytes_per_line;
 
 	if (vb2_plane_size(vb, 0) < size) {
-		dev_err(icd->dev.parent, "Buffer too small (%lu < %lu)\n",
+		dev_err(icd->parent, "Buffer too small (%lu < %lu)\n",
 			vb2_plane_size(vb, 0), size);
 		return -ENOBUFS;
 	}
@@ -384,11 +385,11 @@ static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb)
 static void sh_mobile_ceu_videobuf_queue(struct vb2_buffer *vb)
 {
 	struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb);
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
 		vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
 
 	spin_lock_irq(&pcdev->lock);
@@ -409,7 +410,7 @@ static void sh_mobile_ceu_videobuf_queue(struct vb2_buffer *vb)
 static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb)
 {
 	struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 
@@ -421,8 +422,12 @@ static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb)
 		pcdev->active = NULL;
 	}
 
-	/* Doesn't hurt also if the list is empty */
-	list_del_init(&buf->queue);
+	/*
+	 * Doesn't hurt also if the list is empty, but it hurts, if queuing the
+	 * buffer failed, and .buf_init() hasn't been called
+	 */
+	if (buf->queue.next)
+		list_del_init(&buf->queue);
 
 	spin_unlock_irq(&pcdev->lock);
 }
@@ -437,7 +442,7 @@ static int sh_mobile_ceu_videobuf_init(struct vb2_buffer *vb)
 static int sh_mobile_ceu_stop_streaming(struct vb2_queue *q)
 {
 	struct soc_camera_device *icd = container_of(q, struct soc_camera_device, vb2_vidq);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct list_head *buf_head, *tmp;
 
@@ -499,25 +504,48 @@ out:
 	return IRQ_HANDLED;
 }
 
+static struct v4l2_subdev *find_csi2(struct sh_mobile_ceu_dev *pcdev)
+{
+	struct v4l2_subdev *sd;
+
+	if (!pcdev->csi2_pdev)
+		return NULL;
+
+	v4l2_device_for_each_subdev(sd, &pcdev->ici.v4l2_dev)
+		if (&pcdev->csi2_pdev->dev == v4l2_get_subdevdata(sd))
+			return sd;
+
+	return NULL;
+}
+
 /* Called with .video_lock held */
 static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+	struct v4l2_subdev *csi2_sd;
 	int ret;
 
 	if (pcdev->icd)
 		return -EBUSY;
 
-	dev_info(icd->dev.parent,
+	dev_info(icd->parent,
 		 "SuperH Mobile CEU driver attached to camera %d\n",
 		 icd->devnum);
 
 	pm_runtime_get_sync(ici->v4l2_dev.dev);
 
 	ret = sh_mobile_ceu_soft_reset(pcdev);
-	if (!ret)
+
+	csi2_sd = find_csi2(pcdev);
+
+	ret = v4l2_subdev_call(csi2_sd, core, s_power, 1);
+	if (ret != -ENODEV && ret != -ENOIOCTLCMD && ret < 0) {
+		pm_runtime_put_sync(ici->v4l2_dev.dev);
+	} else {
 		pcdev->icd = icd;
+		ret = 0;
+	}
 
 	return ret;
 }
@@ -525,11 +553,13 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
 /* Called with .video_lock held */
 static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+	struct v4l2_subdev *csi2_sd = find_csi2(pcdev);
 
 	BUG_ON(icd != pcdev->icd);
 
+	v4l2_subdev_call(csi2_sd, core, s_power, 0);
 	/* disable capture, disable interrupts */
 	ceu_write(pcdev, CEIER, 0);
 	sh_mobile_ceu_soft_reset(pcdev);
@@ -545,7 +575,7 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 
 	pm_runtime_put_sync(ici->v4l2_dev.dev);
 
-	dev_info(icd->dev.parent,
+	dev_info(icd->parent,
 		 "SuperH Mobile CEU driver detached from camera %d\n",
 		 icd->devnum);
 
@@ -585,14 +615,14 @@ static u16 calc_scale(unsigned int src, unsigned int *dst)
 /* rect is guaranteed to not exceed the scaled camera rectangle */
 static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	unsigned int height, width, cdwdr_width, in_width, in_height;
 	unsigned int left_offset, top_offset;
 	u32 camor;
 
-	dev_geo(icd->dev.parent, "Crop %ux%u@%u:%u\n",
+	dev_geo(icd->parent, "Crop %ux%u@%u:%u\n",
 		icd->user_width, icd->user_height, cam->ceu_left, cam->ceu_top);
 
 	left_offset	= cam->ceu_left;
@@ -641,7 +671,7 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd)
 	}
 
 	/* CSI2 special configuration */
-	if (pcdev->pdata->csi2_dev) {
+	if (pcdev->pdata->csi2) {
 		in_width = ((in_width - 2) * 2);
 		left_offset *= 2;
 	}
@@ -649,7 +679,7 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd)
 	/* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */
 	camor = left_offset | (top_offset << 16);
 
-	dev_geo(icd->dev.parent,
+	dev_geo(icd->parent,
 		"CAMOR 0x%x, CAPWR 0x%x, CFSZR 0x%x, CDWDR 0x%x\n", camor,
 		(in_height << 16) | in_width, (height << 16) | width,
 		cdwdr_width);
@@ -697,7 +727,7 @@ static void capture_restore(struct sh_mobile_ceu_dev *pcdev, u32 capsr)
 static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 				       __u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	int ret;
 	unsigned long camera_flags, common_flags, value;
@@ -783,7 +813,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	value |= pcdev->is_16bit ? 1 << 12 : 0;
 
 	/* CSI2 mode */
-	if (pcdev->pdata->csi2_dev)
+	if (pcdev->pdata->csi2)
 		value |= 3 << 12;
 
 	ceu_write(pcdev, CAMCR, value);
@@ -806,7 +836,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	sh_mobile_ceu_set_rect(icd);
 	mdelay(1);
 
-	dev_geo(icd->dev.parent, "CFLCR 0x%x\n", pcdev->cflcr);
+	dev_geo(icd->parent, "CFLCR 0x%x\n", pcdev->cflcr);
 	ceu_write(pcdev, CFLCR, pcdev->cflcr);
 
 	/*
@@ -829,7 +859,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	ceu_write(pcdev, CDOCR, value);
 	ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */
 
-	dev_dbg(icd->dev.parent, "S_FMT successful for %c%c%c%c %ux%u\n",
+	dev_dbg(icd->parent, "S_FMT successful for %c%c%c%c %ux%u\n",
 		pixfmt & 0xff, (pixfmt >> 8) & 0xff,
 		(pixfmt >> 16) & 0xff, (pixfmt >> 24) & 0xff,
 		icd->user_width, icd->user_height);
@@ -843,7 +873,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd,
 				       unsigned char buswidth)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	unsigned long camera_flags, common_flags;
 
@@ -901,7 +931,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int
 				     struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	int ret, k, n;
@@ -921,7 +951,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int
 		return 0;
 	}
 
-	if (!pcdev->pdata->csi2_dev) {
+	if (!pcdev->pdata->csi2) {
 		ret = sh_mobile_ceu_try_bus_param(icd, fmt->bits_per_sample);
 		if (ret < 0)
 			return 0;
@@ -1244,7 +1274,7 @@ static int client_s_fmt(struct soc_camera_device *icd,
 {
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	unsigned int width = mf->width, height = mf->height, tmp_w, tmp_h;
 	unsigned int max_width, max_height;
 	struct v4l2_cropcap cap;
@@ -1313,7 +1343,7 @@ static int client_scale(struct soc_camera_device *icd,
 			bool ceu_can_scale)
 {
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	struct v4l2_mbus_framefmt mf_tmp = *mf;
 	unsigned int scale_h, scale_v;
 	int ret;
@@ -1363,13 +1393,13 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 				  struct v4l2_crop *a)
 {
 	struct v4l2_rect *rect = &a->c;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct v4l2_crop cam_crop;
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct v4l2_rect *cam_rect = &cam_crop.c;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
 	struct v4l2_mbus_framefmt mf;
 	unsigned int scale_cam_h, scale_cam_v, scale_ceu_h, scale_ceu_v,
 		out_width, out_height;
@@ -1511,7 +1541,7 @@ static void calculate_client_output(struct soc_camera_device *icd,
 		struct v4l2_pix_format *pix, struct v4l2_mbus_framefmt *mf)
 {
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	struct v4l2_rect *cam_subrect = &cam->subrect;
 	unsigned int scale_v, scale_h;
 
@@ -1555,12 +1585,12 @@ static void calculate_client_output(struct soc_camera_device *icd,
 static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 				 struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_mbus_framefmt mf;
-	struct device *dev = icd->dev.parent;
 	__u32 pixfmt = pix->pixelformat;
 	const struct soc_camera_format_xlate *xlate;
 	/* Keep Compiler Happy */
@@ -1684,12 +1714,12 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	int width, height;
 	int ret;
 
-	dev_geo(icd->dev.parent, "TRY_FMT(pix=0x%x, %ux%u)\n",
+	dev_geo(icd->parent, "TRY_FMT(pix=0x%x, %ux%u)\n",
 		 pixfmt, pix->width, pix->height);
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -1701,11 +1731,6 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	width = pix->width;
 	height = pix->height;
 
-	pix->bytesperline = soc_mbus_bytes_per_line(width, xlate->host_fmt);
-	if ((int)pix->bytesperline < 0)
-		return pix->bytesperline;
-	pix->sizeimage = height * pix->bytesperline;
-
 	/* limit to sensor capabilities */
 	mf.width	= pix->width;
 	mf.height	= pix->height;
@@ -1741,7 +1766,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 							 try_mbus_fmt, &mf);
 			if (ret < 0) {
 				/* Shouldn't actually happen... */
-				dev_err(icd->dev.parent,
+				dev_err(icd->parent,
 					"FIXME: client try_fmt() = %d\n", ret);
 				return ret;
 			}
@@ -1753,7 +1778,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 			pix->height = height;
 	}
 
-	dev_geo(icd->dev.parent, "%s(): return %d, fmt 0x%x, %ux%u\n",
+	dev_geo(icd->parent, "%s(): return %d, fmt 0x%x, %ux%u\n",
 		__func__, ret, pix->pixelformat, pix->width, pix->height);
 
 	return ret;
@@ -1763,7 +1788,7 @@ static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd,
 				      struct v4l2_crop *a)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	u32 out_width = icd->user_width, out_height = icd->user_height;
 	int ret;
@@ -1775,13 +1800,13 @@ static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd,
 	/* Stop the client */
 	ret = v4l2_subdev_call(sd, video, s_stream, 0);
 	if (ret < 0)
-		dev_warn(icd->dev.parent,
+		dev_warn(icd->parent,
 			 "Client failed to stop the stream: %d\n", ret);
 	else
 		/* Do the crop, if it fails, there's nothing more we can do */
 		sh_mobile_ceu_set_crop(icd, a);
 
-	dev_geo(icd->dev.parent, "Output after crop: %ux%u\n", icd->user_width, icd->user_height);
+	dev_geo(icd->parent, "Output after crop: %ux%u\n", icd->user_width, icd->user_height);
 
 	if (icd->user_width != out_width || icd->user_height != out_height) {
 		struct v4l2_format f = {
@@ -1827,7 +1852,6 @@ static int sh_mobile_ceu_querycap(struct soc_camera_host *ici,
 				  struct v4l2_capability *cap)
 {
 	strlcpy(cap->card, "SuperH_Mobile_CEU", sizeof(cap->card));
-	cap->version = KERNEL_VERSION(0, 0, 5);
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 	return 0;
 }
@@ -1848,7 +1872,7 @@ static int sh_mobile_ceu_init_videobuf(struct vb2_queue *q,
 static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd,
 				  struct v4l2_control *ctrl)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	u32 val;
 
@@ -1864,7 +1888,7 @@ static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd,
 static int sh_mobile_ceu_set_ctrl(struct soc_camera_device *icd,
 				  struct v4l2_control *ctrl)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 
 	switch (ctrl->id) {
@@ -1950,7 +1974,7 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
 		.completion = COMPLETION_INITIALIZER_ONSTACK(wait.completion),
 		.notifier.notifier_call = bus_notify,
 	};
-	struct device *csi2;
+	struct sh_mobile_ceu_companion *csi2;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
@@ -2023,26 +2047,61 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
 	pcdev->ici.drv_name = dev_name(&pdev->dev);
 	pcdev->ici.ops = &sh_mobile_ceu_host_ops;
 
+	pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
+	if (IS_ERR(pcdev->alloc_ctx)) {
+		err = PTR_ERR(pcdev->alloc_ctx);
+		goto exit_free_clk;
+	}
+
+	err = soc_camera_host_register(&pcdev->ici);
+	if (err)
+		goto exit_free_ctx;
+
 	/* CSI2 interfacing */
-	csi2 = pcdev->pdata->csi2_dev;
+	csi2 = pcdev->pdata->csi2;
 	if (csi2) {
-		wait.dev = csi2;
+		struct platform_device *csi2_pdev =
+			platform_device_alloc("sh-mobile-csi2", csi2->id);
+		struct sh_csi2_pdata *csi2_pdata = csi2->platform_data;
+
+		if (!csi2_pdev) {
+			err = -ENOMEM;
+			goto exit_host_unregister;
+		}
+
+		pcdev->csi2_pdev		= csi2_pdev;
+
+		err = platform_device_add_data(csi2_pdev, csi2_pdata, sizeof(*csi2_pdata));
+		if (err < 0)
+			goto exit_pdev_put;
+
+		csi2_pdata			= csi2_pdev->dev.platform_data;
+		csi2_pdata->v4l2_dev		= &pcdev->ici.v4l2_dev;
+
+		csi2_pdev->resource		= csi2->resource;
+		csi2_pdev->num_resources	= csi2->num_resources;
+
+		err = platform_device_add(csi2_pdev);
+		if (err < 0)
+			goto exit_pdev_put;
+
+		wait.dev = &csi2_pdev->dev;
 
 		err = bus_register_notifier(&platform_bus_type, &wait.notifier);
 		if (err < 0)
-			goto exit_free_clk;
+			goto exit_pdev_unregister;
 
 		/*
 		 * From this point the driver module will not unload, until
 		 * we complete the completion.
 		 */
 
-		if (!csi2->driver) {
+		if (!csi2_pdev->dev.driver) {
 			complete(&wait.completion);
 			/* Either too late, or probing failed */
 			bus_unregister_notifier(&platform_bus_type, &wait.notifier);
 			err = -ENXIO;
-			goto exit_free_clk;
+			goto exit_pdev_unregister;
 		}
 
 		/*
@@ -2051,34 +2110,28 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
 		 * the "owner" is safe!
 		 */
 
-		err = try_module_get(csi2->driver->owner);
+		err = try_module_get(csi2_pdev->dev.driver->owner);
 
 		/* Let notifier complete, if it has been locked */
 		complete(&wait.completion);
 		bus_unregister_notifier(&platform_bus_type, &wait.notifier);
 		if (!err) {
 			err = -ENODEV;
-			goto exit_free_clk;
+			goto exit_pdev_unregister;
 		}
 	}
 
-	pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
-	if (IS_ERR(pcdev->alloc_ctx)) {
-		err = PTR_ERR(pcdev->alloc_ctx);
-		goto exit_module_put;
-	}
-
-	err = soc_camera_host_register(&pcdev->ici);
-	if (err)
-		goto exit_free_ctx;
-
 	return 0;
 
+exit_pdev_unregister:
+	platform_device_del(pcdev->csi2_pdev);
+exit_pdev_put:
+	pcdev->csi2_pdev->resource = NULL;
+	platform_device_put(pcdev->csi2_pdev);
+exit_host_unregister:
+	soc_camera_host_unregister(&pcdev->ici);
 exit_free_ctx:
 	vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
-exit_module_put:
-	if (csi2 && csi2->driver)
-		module_put(csi2->driver->owner);
 exit_free_clk:
 	pm_runtime_disable(&pdev->dev);
 	free_irq(pcdev->irq, pcdev);
@@ -2098,7 +2151,7 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev)
 	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
 	struct sh_mobile_ceu_dev *pcdev = container_of(soc_host,
 					struct sh_mobile_ceu_dev, ici);
-	struct device *csi2 = pcdev->pdata->csi2_dev;
+	struct platform_device *csi2_pdev = pcdev->csi2_pdev;
 
 	soc_camera_host_unregister(soc_host);
 	pm_runtime_disable(&pdev->dev);
@@ -2107,8 +2160,13 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev)
 		dma_release_declared_memory(&pdev->dev);
 	iounmap(pcdev->base);
 	vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
-	if (csi2 && csi2->driver)
-		module_put(csi2->driver->owner);
+	if (csi2_pdev && csi2_pdev->dev.driver) {
+		struct module *csi2_drv = csi2_pdev->dev.driver->owner;
+		platform_device_del(csi2_pdev);
+		csi2_pdev->resource = NULL;
+		platform_device_put(csi2_pdev);
+		module_put(csi2_drv);
+	}
 	kfree(pcdev);
 
 	return 0;
@@ -2158,4 +2216,5 @@ module_exit(sh_mobile_ceu_exit);
 MODULE_DESCRIPTION("SuperH Mobile CEU driver");
 MODULE_AUTHOR("Magnus Damm");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.6");
 MODULE_ALIAS("platform:sh_mobile_ceu");
diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c
index 98b8748..2893a01 100644
--- a/drivers/media/video/sh_mobile_csi2.c
+++ b/drivers/media/video/sh_mobile_csi2.c
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 
+#include <media/sh_mobile_ceu.h>
 #include <media/sh_mobile_csi2.h>
 #include <media/soc_camera.h>
 #include <media/v4l2-common.h>
@@ -33,7 +34,6 @@
 struct sh_csi2 {
 	struct v4l2_subdev		subdev;
 	struct list_head		list;
-	struct notifier_block		notifier;
 	unsigned int			irq;
 	void __iomem			*base;
 	struct platform_device		*pdev;
@@ -132,13 +132,6 @@ static struct v4l2_subdev_video_ops sh_csi2_subdev_video_ops = {
 	.try_mbus_fmt	= sh_csi2_try_fmt,
 };
 
-static struct v4l2_subdev_core_ops sh_csi2_subdev_core_ops;
-
-static struct v4l2_subdev_ops sh_csi2_subdev_ops = {
-	.core	= &sh_csi2_subdev_core_ops,
-	.video	= &sh_csi2_subdev_video_ops,
-};
-
 static void sh_csi2_hwinit(struct sh_csi2 *priv)
 {
 	struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
@@ -186,65 +179,84 @@ static unsigned long sh_csi2_query_bus_param(struct soc_camera_device *icd)
 	return soc_camera_apply_sensor_flags(icl, flags);
 }
 
-static int sh_csi2_notify(struct notifier_block *nb,
-			  unsigned long action, void *data)
+static int sh_csi2_client_connect(struct sh_csi2 *priv)
 {
-	struct device *dev = data;
-	struct soc_camera_device *icd = to_soc_camera_dev(dev);
-	struct v4l2_device *v4l2_dev = dev_get_drvdata(dev->parent);
-	struct sh_csi2 *priv =
-		container_of(nb, struct sh_csi2, notifier);
 	struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
-	int ret, i;
+	struct v4l2_subdev *sd, *csi2_sd = &priv->subdev;
+	struct soc_camera_device *icd = NULL;
+	struct device *dev = v4l2_get_subdevdata(&priv->subdev);
+	int i;
+
+	v4l2_device_for_each_subdev(sd, csi2_sd->v4l2_dev)
+		if (sd->grp_id) {
+			icd = (struct soc_camera_device *)sd->grp_id;
+			break;
+		}
+
+	if (!icd)
+		return -EINVAL;
 
 	for (i = 0; i < pdata->num_clients; i++)
 		if (&pdata->clients[i].pdev->dev == icd->pdev)
 			break;
 
-	dev_dbg(dev, "%s(%p): action = %lu, found #%d\n", __func__, dev, action, i);
+	dev_dbg(dev, "%s(%p): found #%d\n", __func__, dev, i);
 
 	if (i == pdata->num_clients)
-		return NOTIFY_DONE;
+		return -ENODEV;
 
-	switch (action) {
-	case BUS_NOTIFY_BOUND_DRIVER:
-		snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s%s",
-			 dev_name(v4l2_dev->dev), ".mipi-csi");
-		priv->subdev.grp_id = (long)icd;
-		ret = v4l2_device_register_subdev(v4l2_dev, &priv->subdev);
-		dev_dbg(dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret);
-		if (ret < 0)
-			return NOTIFY_DONE;
+	priv->client = pdata->clients + i;
 
-		priv->client = pdata->clients + i;
+	priv->set_bus_param		= icd->ops->set_bus_param;
+	priv->query_bus_param		= icd->ops->query_bus_param;
+	icd->ops->set_bus_param		= sh_csi2_set_bus_param;
+	icd->ops->query_bus_param	= sh_csi2_query_bus_param;
 
-		priv->set_bus_param		= icd->ops->set_bus_param;
-		priv->query_bus_param		= icd->ops->query_bus_param;
-		icd->ops->set_bus_param		= sh_csi2_set_bus_param;
-		icd->ops->query_bus_param	= sh_csi2_query_bus_param;
+	csi2_sd->grp_id = (long)icd;
 
-		pm_runtime_get_sync(v4l2_get_subdevdata(&priv->subdev));
+	pm_runtime_get_sync(dev);
 
-		sh_csi2_hwinit(priv);
-		break;
-	case BUS_NOTIFY_UNBIND_DRIVER:
-		priv->client = NULL;
+	sh_csi2_hwinit(priv);
 
-		/* Driver is about to be unbound */
-		icd->ops->set_bus_param		= priv->set_bus_param;
-		icd->ops->query_bus_param	= priv->query_bus_param;
-		priv->set_bus_param		= NULL;
-		priv->query_bus_param		= NULL;
+	return 0;
+}
 
-		v4l2_device_unregister_subdev(&priv->subdev);
+static void sh_csi2_client_disconnect(struct sh_csi2 *priv)
+{
+	struct soc_camera_device *icd = (struct soc_camera_device *)priv->subdev.grp_id;
 
-		pm_runtime_put(v4l2_get_subdevdata(&priv->subdev));
-		break;
-	}
+	priv->client = NULL;
+	priv->subdev.grp_id = 0;
 
-	return NOTIFY_OK;
+	/* Driver is about to be unbound */
+	icd->ops->set_bus_param		= priv->set_bus_param;
+	icd->ops->query_bus_param	= priv->query_bus_param;
+	priv->set_bus_param		= NULL;
+	priv->query_bus_param		= NULL;
+
+	pm_runtime_put(v4l2_get_subdevdata(&priv->subdev));
 }
 
+static int sh_csi2_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
+
+	if (on)
+		return sh_csi2_client_connect(priv);
+
+	sh_csi2_client_disconnect(priv);
+	return 0;
+}
+
+static struct v4l2_subdev_core_ops sh_csi2_subdev_core_ops = {
+	.s_power	= sh_csi2_s_power,
+};
+
+static struct v4l2_subdev_ops sh_csi2_subdev_ops = {
+	.core	= &sh_csi2_subdev_core_ops,
+	.video	= &sh_csi2_subdev_video_ops,
+};
+
 static __devinit int sh_csi2_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -274,14 +286,6 @@ static __devinit int sh_csi2_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	priv->irq = irq;
-	priv->notifier.notifier_call = sh_csi2_notify;
-
-	/* We MUST attach after the MIPI sensor */
-	ret = bus_register_notifier(&soc_camera_bus_type, &priv->notifier);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "CSI2 cannot register notifier\n");
-		goto ernotify;
-	}
 
 	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
 		dev_err(&pdev->dev, "CSI2 register region already claimed\n");
@@ -297,11 +301,17 @@ static __devinit int sh_csi2_probe(struct platform_device *pdev)
 	}
 
 	priv->pdev = pdev;
+	platform_set_drvdata(pdev, priv);
 
 	v4l2_subdev_init(&priv->subdev, &sh_csi2_subdev_ops);
 	v4l2_set_subdevdata(&priv->subdev, &pdev->dev);
 
-	platform_set_drvdata(pdev, priv);
+	snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s.mipi-csi",
+		 dev_name(pdata->v4l2_dev->dev));
+	ret = v4l2_device_register_subdev(pdata->v4l2_dev, &priv->subdev);
+	dev_dbg(&pdev->dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret);
+	if (ret < 0)
+		goto esdreg;
 
 	pm_runtime_enable(&pdev->dev);
 
@@ -309,11 +319,11 @@ static __devinit int sh_csi2_probe(struct platform_device *pdev)
 
 	return 0;
 
+esdreg:
+	iounmap(priv->base);
 eremap:
 	release_mem_region(res->start, resource_size(res));
 ereqreg:
-	bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier);
-ernotify:
 	kfree(priv);
 
 	return ret;
@@ -324,7 +334,7 @@ static __devexit int sh_csi2_remove(struct platform_device *pdev)
 	struct sh_csi2 *priv = platform_get_drvdata(pdev);
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier);
+	v4l2_device_unregister_subdev(&priv->subdev);
 	pm_runtime_disable(&pdev->dev);
 	iounmap(priv->base);
 	release_mem_region(res->start, resource_size(res));
@@ -335,8 +345,9 @@ static __devexit int sh_csi2_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver __refdata sh_csi2_pdrv = {
-	.remove  = __devexit_p(sh_csi2_remove),
-	.driver  = {
+	.remove	= __devexit_p(sh_csi2_remove),
+	.probe	= sh_csi2_probe,
+	.driver	= {
 		.name	= "sh-mobile-csi2",
 		.owner	= THIS_MODULE,
 	},
@@ -344,7 +355,7 @@ static struct platform_driver __refdata sh_csi2_pdrv = {
 
 static int __init sh_csi2_init(void)
 {
-	return platform_driver_probe(&sh_csi2_pdrv, sh_csi2_probe);
+	return platform_driver_register(&sh_csi2_pdrv);
 }
 
 static void __exit sh_csi2_exit(void)
diff --git a/drivers/media/video/sh_vou.c b/drivers/media/video/sh_vou.c
index 07cf0c6..6a72987 100644
--- a/drivers/media/video/sh_vou.c
+++ b/drivers/media/video/sh_vou.c
@@ -19,7 +19,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 
 #include <media/sh_vou.h>
@@ -393,7 +392,6 @@ static int sh_vou_querycap(struct file *file, void  *priv,
 	dev_dbg(vou_file->vbq.dev, "%s()\n", __func__);
 
 	strlcpy(cap->card, "SuperH VOU", sizeof(cap->card));
-	cap->version = KERNEL_VERSION(0, 1, 0);
 	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
 	return 0;
 }
@@ -1490,4 +1488,5 @@ module_exit(sh_vou_exit);
 MODULE_DESCRIPTION("SuperH VOU driver");
 MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
 MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1.0");
 MODULE_ALIAS("platform:sh-vou");
diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/video/sn9c102/sn9c102.h
index cbfc444..22ea211 100644
--- a/drivers/media/video/sn9c102/sn9c102.h
+++ b/drivers/media/video/sn9c102/sn9c102.h
@@ -21,7 +21,6 @@
 #ifndef _SN9C102_H_
 #define _SN9C102_H_
 
-#include <linux/version.h>
 #include <linux/usb.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 0e07c49..16cb07c5 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -33,6 +33,7 @@
 #include <linux/stat.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
+#include <linux/version.h>
 #include <linux/page-flags.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
@@ -47,8 +48,7 @@
 #define SN9C102_MODULE_AUTHOR   "(C) 2004-2007 Luca Risolia"
 #define SN9C102_AUTHOR_EMAIL    "<luca.risolia@studio.unibo.it>"
 #define SN9C102_MODULE_LICENSE  "GPL"
-#define SN9C102_MODULE_VERSION  "1:1.47pre49"
-#define SN9C102_MODULE_VERSION_CODE  KERNEL_VERSION(1, 1, 47)
+#define SN9C102_MODULE_VERSION  "1:1.48"
 
 /*****************************************************************************/
 
@@ -2158,7 +2158,7 @@ sn9c102_vidioc_querycap(struct sn9c102_device* cam, void __user * arg)
 {
 	struct v4l2_capability cap = {
 		.driver = "sn9c102",
-		.version = SN9C102_MODULE_VERSION_CODE,
+		.version = LINUX_VERSION_CODE,
 		.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
 				V4L2_CAP_STREAMING,
 	};
@@ -3187,16 +3187,8 @@ static long sn9c102_ioctl_v4l2(struct file *filp,
 	case VIDIOC_S_AUDIO:
 		return sn9c102_vidioc_s_audio(cam, arg);
 
-	case VIDIOC_G_STD:
-	case VIDIOC_S_STD:
-	case VIDIOC_QUERYSTD:
-	case VIDIOC_ENUMSTD:
-	case VIDIOC_QUERYMENU:
-	case VIDIOC_ENUM_FRAMEINTERVALS:
-		return -EINVAL;
-
 	default:
-		return -EINVAL;
+		return -ENOTTY;
 
 	}
 }
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 4e4d412..5bdfe7e 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -60,14 +60,14 @@ static int soc_camera_power_set(struct soc_camera_device *icd,
 		ret = regulator_bulk_enable(icl->num_regulators,
 					    icl->regulators);
 		if (ret < 0) {
-			dev_err(&icd->dev, "Cannot enable regulators\n");
+			dev_err(icd->pdev, "Cannot enable regulators\n");
 			return ret;
 		}
 
 		if (icl->power)
 			ret = icl->power(icd->pdev, power_on);
 		if (ret < 0) {
-			dev_err(&icd->dev,
+			dev_err(icd->pdev,
 				"Platform failed to power-on the camera.\n");
 
 			regulator_bulk_disable(icl->num_regulators,
@@ -79,7 +79,7 @@ static int soc_camera_power_set(struct soc_camera_device *icd,
 		if (icl->power)
 			ret = icl->power(icd->pdev, 0);
 		if (ret < 0) {
-			dev_err(&icd->dev,
+			dev_err(icd->pdev,
 				"Platform failed to power-off the camera.\n");
 			return ret;
 		}
@@ -87,7 +87,7 @@ static int soc_camera_power_set(struct soc_camera_device *icd,
 		ret = regulator_bulk_disable(icl->num_regulators,
 					     icl->regulators);
 		if (ret < 0) {
-			dev_err(&icd->dev, "Cannot disable regulators\n");
+			dev_err(icd->pdev, "Cannot disable regulators\n");
 			return ret;
 		}
 	}
@@ -147,11 +147,11 @@ EXPORT_SYMBOL(soc_camera_apply_sensor_flags);
 static int soc_camera_try_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	int ret;
 
-	dev_dbg(&icd->dev, "TRY_FMT(%c%c%c%c, %ux%u)\n",
+	dev_dbg(icd->pdev, "TRY_FMT(%c%c%c%c, %ux%u)\n",
 		pixfmtstr(pix->pixelformat), pix->width, pix->height);
 
 	pix->bytesperline = 0;
@@ -199,22 +199,15 @@ static int soc_camera_try_fmt_vid_cap(struct file *file, void *priv,
 static int soc_camera_enum_input(struct file *file, void *priv,
 				 struct v4l2_input *inp)
 {
-	struct soc_camera_device *icd = file->private_data;
-	int ret = 0;
-
 	if (inp->index != 0)
 		return -EINVAL;
 
-	if (icd->ops->enum_input)
-		ret = icd->ops->enum_input(icd, inp);
-	else {
-		/* default is camera */
-		inp->type = V4L2_INPUT_TYPE_CAMERA;
-		inp->std  = V4L2_STD_UNKNOWN;
-		strcpy(inp->name, "Camera");
-	}
+	/* default is camera */
+	inp->type = V4L2_INPUT_TYPE_CAMERA;
+	inp->std  = V4L2_STD_UNKNOWN;
+	strcpy(inp->name, "Camera");
 
-	return ret;
+	return 0;
 }
 
 static int soc_camera_g_input(struct file *file, void *priv, unsigned int *i)
@@ -244,7 +237,7 @@ static int soc_camera_enum_fsizes(struct file *file, void *fh,
 					 struct v4l2_frmsizeenum *fsize)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	return ici->ops->enum_fsizes(icd, fsize);
 }
@@ -254,7 +247,7 @@ static int soc_camera_reqbufs(struct file *file, void *priv,
 {
 	int ret;
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -281,7 +274,7 @@ static int soc_camera_querybuf(struct file *file, void *priv,
 			       struct v4l2_buffer *p)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -295,7 +288,7 @@ static int soc_camera_qbuf(struct file *file, void *priv,
 			   struct v4l2_buffer *p)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -312,7 +305,7 @@ static int soc_camera_dqbuf(struct file *file, void *priv,
 			    struct v4l2_buffer *p)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -329,7 +322,7 @@ static int soc_camera_dqbuf(struct file *file, void *priv,
 static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	unsigned int i, fmts = 0, raw_fmts = 0;
 	int ret;
 	enum v4l2_mbus_pixelcode code;
@@ -363,7 +356,7 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 	if (!icd->user_formats)
 		return -ENOMEM;
 
-	dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts);
+	dev_dbg(icd->pdev, "Found %d supported formats.\n", fmts);
 
 	/* Second pass - actually fill data formats */
 	fmts = 0;
@@ -395,7 +388,7 @@ egfmt:
 /* Always entered with .video_lock held */
 static void soc_camera_free_user_formats(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	if (ici->ops->put_formats)
 		ici->ops->put_formats(icd);
@@ -409,11 +402,11 @@ static void soc_camera_free_user_formats(struct soc_camera_device *icd)
 static int soc_camera_set_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	int ret;
 
-	dev_dbg(&icd->dev, "S_FMT(%c%c%c%c, %ux%u)\n",
+	dev_dbg(icd->pdev, "S_FMT(%c%c%c%c, %ux%u)\n",
 		pixfmtstr(pix->pixelformat), pix->width, pix->height);
 
 	/* We always call try_fmt() before set_fmt() or set_crop() */
@@ -426,7 +419,7 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd,
 		return ret;
 	} else if (!icd->current_fmt ||
 		   icd->current_fmt->host_fmt->fourcc != pix->pixelformat) {
-		dev_err(&icd->dev,
+		dev_err(icd->pdev,
 			"Host driver hasn't set up current format correctly!\n");
 		return -EINVAL;
 	}
@@ -440,7 +433,7 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd,
 	if (ici->ops->init_videobuf)
 		icd->vb_vidq.field = pix->field;
 
-	dev_dbg(&icd->dev, "set width: %d height: %d\n",
+	dev_dbg(icd->pdev, "set width: %d height: %d\n",
 		icd->user_width, icd->user_height);
 
 	/* set physical bus parameters */
@@ -450,9 +443,7 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd,
 static int soc_camera_open(struct file *file)
 {
 	struct video_device *vdev = video_devdata(file);
-	struct soc_camera_device *icd = container_of(vdev->parent,
-						     struct soc_camera_device,
-						     dev);
+	struct soc_camera_device *icd = dev_get_drvdata(vdev->parent);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	struct soc_camera_host *ici;
 	int ret;
@@ -461,10 +452,10 @@ static int soc_camera_open(struct file *file)
 		/* No device driver attached */
 		return -ENODEV;
 
-	ici = to_soc_camera_host(icd->dev.parent);
+	ici = to_soc_camera_host(icd->parent);
 
 	if (!try_module_get(ici->ops->owner)) {
-		dev_err(&icd->dev, "Couldn't lock capture bus driver.\n");
+		dev_err(icd->pdev, "Couldn't lock capture bus driver.\n");
 		return -EINVAL;
 	}
 
@@ -495,7 +486,7 @@ static int soc_camera_open(struct file *file)
 
 		ret = ici->ops->add(icd);
 		if (ret < 0) {
-			dev_err(&icd->dev, "Couldn't activate the camera: %d\n", ret);
+			dev_err(icd->pdev, "Couldn't activate the camera: %d\n", ret);
 			goto eiciadd;
 		}
 
@@ -524,7 +515,7 @@ static int soc_camera_open(struct file *file)
 	}
 
 	file->private_data = icd;
-	dev_dbg(&icd->dev, "camera device open\n");
+	dev_dbg(icd->pdev, "camera device open\n");
 
 	return 0;
 
@@ -549,7 +540,7 @@ epower:
 static int soc_camera_close(struct file *file)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	icd->use_count--;
 	if (!icd->use_count) {
@@ -570,7 +561,7 @@ static int soc_camera_close(struct file *file)
 
 	module_put(ici->ops->owner);
 
-	dev_dbg(&icd->dev, "camera device close\n");
+	dev_dbg(icd->pdev, "camera device close\n");
 
 	return 0;
 }
@@ -581,7 +572,7 @@ static ssize_t soc_camera_read(struct file *file, char __user *buf,
 	struct soc_camera_device *icd = file->private_data;
 	int err = -EINVAL;
 
-	dev_err(&icd->dev, "camera device read not implemented\n");
+	dev_err(icd->pdev, "camera device read not implemented\n");
 
 	return err;
 }
@@ -589,10 +580,10 @@ static ssize_t soc_camera_read(struct file *file, char __user *buf,
 static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	int err;
 
-	dev_dbg(&icd->dev, "mmap called, vma=0x%08lx\n", (unsigned long)vma);
+	dev_dbg(icd->pdev, "mmap called, vma=0x%08lx\n", (unsigned long)vma);
 
 	if (icd->streamer != file)
 		return -EBUSY;
@@ -602,7 +593,7 @@ static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma)
 	else
 		err = vb2_mmap(&icd->vb2_vidq, vma);
 
-	dev_dbg(&icd->dev, "vma start=0x%08lx, size=%ld, ret=%d\n",
+	dev_dbg(icd->pdev, "vma start=0x%08lx, size=%ld, ret=%d\n",
 		(unsigned long)vma->vm_start,
 		(unsigned long)vma->vm_end - (unsigned long)vma->vm_start,
 		err);
@@ -613,13 +604,13 @@ static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma)
 static unsigned int soc_camera_poll(struct file *file, poll_table *pt)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	if (icd->streamer != file)
 		return -EBUSY;
 
 	if (ici->ops->init_videobuf && list_empty(&icd->vb_vidq.stream)) {
-		dev_err(&icd->dev, "Trying to poll with no queued buffers!\n");
+		dev_err(icd->pdev, "Trying to poll with no queued buffers!\n");
 		return POLLERR;
 	}
 
@@ -659,15 +650,15 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv,
 	WARN_ON(priv != file->private_data);
 
 	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		dev_warn(&icd->dev, "Wrong buf-type %d\n", f->type);
+		dev_warn(icd->pdev, "Wrong buf-type %d\n", f->type);
 		return -EINVAL;
 	}
 
 	if (icd->streamer && icd->streamer != file)
 		return -EBUSY;
 
-	if (is_streaming(to_soc_camera_host(icd->dev.parent), icd)) {
-		dev_err(&icd->dev, "S_FMT denied: queue initialised\n");
+	if (is_streaming(to_soc_camera_host(icd->parent), icd)) {
+		dev_err(icd->pdev, "S_FMT denied: queue initialised\n");
 		return -EBUSY;
 	}
 
@@ -716,7 +707,7 @@ static int soc_camera_g_fmt_vid_cap(struct file *file, void *priv,
 	pix->field		= icd->field;
 	pix->pixelformat	= icd->current_fmt->host_fmt->fourcc;
 	pix->colorspace		= icd->colorspace;
-	dev_dbg(&icd->dev, "current_fmt->fourcc: 0x%08x\n",
+	dev_dbg(icd->pdev, "current_fmt->fourcc: 0x%08x\n",
 		icd->current_fmt->host_fmt->fourcc);
 	return 0;
 }
@@ -725,7 +716,7 @@ static int soc_camera_querycap(struct file *file, void  *priv,
 			       struct v4l2_capability *cap)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -737,7 +728,7 @@ static int soc_camera_streamon(struct file *file, void *priv,
 			       enum v4l2_buf_type i)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	int ret;
 
@@ -766,7 +757,7 @@ static int soc_camera_streamoff(struct file *file, void *priv,
 {
 	struct soc_camera_device *icd = file->private_data;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -794,7 +785,7 @@ static int soc_camera_queryctrl(struct file *file, void *priv,
 				struct v4l2_queryctrl *qc)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	int i;
 
 	WARN_ON(priv != file->private_data);
@@ -825,7 +816,7 @@ static int soc_camera_g_ctrl(struct file *file, void *priv,
 			     struct v4l2_control *ctrl)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	int ret;
 
@@ -844,7 +835,7 @@ static int soc_camera_s_ctrl(struct file *file, void *priv,
 			     struct v4l2_control *ctrl)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	int ret;
 
@@ -863,7 +854,7 @@ static int soc_camera_cropcap(struct file *file, void *fh,
 			      struct v4l2_cropcap *a)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	return ici->ops->cropcap(icd, a);
 }
@@ -872,7 +863,7 @@ static int soc_camera_g_crop(struct file *file, void *fh,
 			     struct v4l2_crop *a)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	int ret;
 
 	ret = ici->ops->get_crop(icd, a);
@@ -889,7 +880,7 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 			     struct v4l2_crop *a)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_rect *rect = &a->c;
 	struct v4l2_crop current_crop;
 	int ret;
@@ -897,7 +888,7 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
-	dev_dbg(&icd->dev, "S_CROP(%ux%u@%u:%u)\n",
+	dev_dbg(icd->pdev, "S_CROP(%ux%u@%u:%u)\n",
 		rect->width, rect->height, rect->left, rect->top);
 
 	/* If get_crop fails, we'll let host and / or client drivers decide */
@@ -905,7 +896,7 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 
 	/* Prohibit window size change with initialised buffers */
 	if (ret < 0) {
-		dev_err(&icd->dev,
+		dev_err(icd->pdev,
 			"S_CROP denied: getting current crop failed\n");
 	} else if ((a->c.width == current_crop.c.width &&
 		    a->c.height == current_crop.c.height) ||
@@ -915,7 +906,7 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	} else if (ici->ops->set_livecrop) {
 		ret = ici->ops->set_livecrop(icd, a);
 	} else {
-		dev_err(&icd->dev,
+		dev_err(icd->pdev,
 			"S_CROP denied: queue initialised and sizes differ\n");
 		ret = -EBUSY;
 	}
@@ -927,7 +918,7 @@ static int soc_camera_g_parm(struct file *file, void *fh,
 			     struct v4l2_streamparm *a)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	if (ici->ops->get_parm)
 		return ici->ops->get_parm(icd, a);
@@ -939,7 +930,7 @@ static int soc_camera_s_parm(struct file *file, void *fh,
 			     struct v4l2_streamparm *a)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	if (ici->ops->set_parm)
 		return ici->ops->set_parm(icd, a);
@@ -976,6 +967,8 @@ static int soc_camera_s_register(struct file *file, void *fh,
 }
 #endif
 
+static int soc_camera_probe(struct soc_camera_device *icd);
+
 /* So far this function cannot fail */
 static void scan_add_host(struct soc_camera_host *ici)
 {
@@ -986,15 +979,9 @@ static void scan_add_host(struct soc_camera_host *ici)
 	list_for_each_entry(icd, &devices, list) {
 		if (icd->iface == ici->nr) {
 			int ret;
-			icd->dev.parent = ici->v4l2_dev.dev;
-			dev_set_name(&icd->dev, "%u-%u", icd->iface,
-				     icd->devnum);
-			ret = device_register(&icd->dev);
-			if (ret < 0) {
-				icd->dev.parent = NULL;
-				dev_err(&icd->dev,
-					"Cannot register device: %d\n", ret);
-			}
+
+			icd->parent = ici->v4l2_dev.dev;
+			ret = soc_camera_probe(icd);
 		}
 	}
 
@@ -1006,12 +993,12 @@ static int soc_camera_init_i2c(struct soc_camera_device *icd,
 			       struct soc_camera_link *icl)
 {
 	struct i2c_client *client;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct i2c_adapter *adap = i2c_get_adapter(icl->i2c_adapter_id);
 	struct v4l2_subdev *subdev;
 
 	if (!adap) {
-		dev_err(&icd->dev, "Cannot get I2C adapter #%d. No driver?\n",
+		dev_err(icd->pdev, "Cannot get I2C adapter #%d. No driver?\n",
 			icl->i2c_adapter_id);
 		goto ei2cga;
 	}
@@ -1026,7 +1013,7 @@ static int soc_camera_init_i2c(struct soc_camera_device *icd,
 	client = v4l2_get_subdevdata(subdev);
 
 	/* Use to_i2c_client(dev) to recover the i2c client */
-	dev_set_drvdata(&icd->dev, &client->dev);
+	icd->control = &client->dev;
 
 	return 0;
 ei2cnd:
@@ -1040,7 +1027,8 @@ static void soc_camera_free_i2c(struct soc_camera_device *icd)
 	struct i2c_client *client =
 		to_i2c_client(to_soc_camera_control(icd));
 	struct i2c_adapter *adap = client->adapter;
-	dev_set_drvdata(&icd->dev, NULL);
+
+	icd->control = NULL;
 	v4l2_device_unregister_subdev(i2c_get_clientdata(client));
 	i2c_unregister_device(client);
 	i2c_put_adapter(adap);
@@ -1053,17 +1041,16 @@ static void soc_camera_free_i2c(struct soc_camera_device *icd)
 static int soc_camera_video_start(struct soc_camera_device *icd);
 static int video_dev_create(struct soc_camera_device *icd);
 /* Called during host-driver probe */
-static int soc_camera_probe(struct device *dev)
+static int soc_camera_probe(struct soc_camera_device *icd)
 {
-	struct soc_camera_device *icd = to_soc_camera_dev(dev);
-	struct soc_camera_host *ici = to_soc_camera_host(dev->parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	struct device *control = NULL;
 	struct v4l2_subdev *sd;
 	struct v4l2_mbus_framefmt mf;
 	int ret;
 
-	dev_info(dev, "Probing %s\n", dev_name(dev));
+	dev_info(icd->pdev, "Probing %s\n", dev_name(icd->pdev));
 
 	ret = regulator_bulk_get(icd->pdev, icl->num_regulators,
 				 icl->regulators);
@@ -1099,7 +1086,7 @@ static int soc_camera_probe(struct device *dev)
 		if (icl->module_name)
 			ret = request_module(icl->module_name);
 
-		ret = icl->add_device(icl, &icd->dev);
+		ret = icl->add_device(icd);
 		if (ret < 0)
 			goto eadddev;
 
@@ -1110,7 +1097,7 @@ static int soc_camera_probe(struct device *dev)
 		control = to_soc_camera_control(icd);
 		if (!control || !control->driver || !dev_get_drvdata(control) ||
 		    !try_module_get(control->driver->owner)) {
-			icl->del_device(icl);
+			icl->del_device(icd);
 			goto enodrv;
 		}
 	}
@@ -1125,8 +1112,6 @@ static int soc_camera_probe(struct device *dev)
 
 	icd->field = V4L2_FIELD_ANY;
 
-	icd->vdev->lock = &icd->video_lock;
-
 	/*
 	 * ..._video_start() will create a device node, video_register_device()
 	 * itself is protected against concurrent open() calls, but we also have
@@ -1146,11 +1131,6 @@ static int soc_camera_probe(struct device *dev)
 		icd->field		= mf.field;
 	}
 
-	/* Do we have to sysfs_remove_link() before device_unregister()? */
-	if (sysfs_create_link(&icd->dev.kobj, &to_soc_camera_control(icd)->kobj,
-			      "control"))
-		dev_warn(&icd->dev, "Failed creating the control symlink\n");
-
 	ici->ops->remove(icd);
 
 	soc_camera_power_set(icd, icl, 0);
@@ -1166,7 +1146,7 @@ eiufmt:
 	if (icl->board_info) {
 		soc_camera_free_i2c(icd);
 	} else {
-		icl->del_device(icl);
+		icl->del_device(icd);
 		module_put(control->driver->owner);
 	}
 enodrv:
@@ -1186,13 +1166,12 @@ ereg:
  * This is called on device_unregister, which only means we have to disconnect
  * from the host, but not remove ourselves from the device list
  */
-static int soc_camera_remove(struct device *dev)
+static int soc_camera_remove(struct soc_camera_device *icd)
 {
-	struct soc_camera_device *icd = to_soc_camera_dev(dev);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	struct video_device *vdev = icd->vdev;
 
-	BUG_ON(!dev->parent);
+	BUG_ON(!icd->parent);
 
 	if (vdev) {
 		video_unregister_device(vdev);
@@ -1202,10 +1181,9 @@ static int soc_camera_remove(struct device *dev)
 	if (icl->board_info) {
 		soc_camera_free_i2c(icd);
 	} else {
-		struct device_driver *drv = to_soc_camera_control(icd) ?
-			to_soc_camera_control(icd)->driver : NULL;
+		struct device_driver *drv = to_soc_camera_control(icd)->driver;
 		if (drv) {
-			icl->del_device(icl);
+			icl->del_device(icd);
 			module_put(drv->owner);
 		}
 	}
@@ -1216,49 +1194,6 @@ static int soc_camera_remove(struct device *dev)
 	return 0;
 }
 
-static int soc_camera_suspend(struct device *dev, pm_message_t state)
-{
-	struct soc_camera_device *icd = to_soc_camera_dev(dev);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	int ret = 0;
-
-	if (ici->ops->suspend)
-		ret = ici->ops->suspend(icd, state);
-
-	return ret;
-}
-
-static int soc_camera_resume(struct device *dev)
-{
-	struct soc_camera_device *icd = to_soc_camera_dev(dev);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	int ret = 0;
-
-	if (ici->ops->resume)
-		ret = ici->ops->resume(icd);
-
-	return ret;
-}
-
-struct bus_type soc_camera_bus_type = {
-	.name		= "soc-camera",
-	.probe		= soc_camera_probe,
-	.remove		= soc_camera_remove,
-	.suspend	= soc_camera_suspend,
-	.resume		= soc_camera_resume,
-};
-EXPORT_SYMBOL_GPL(soc_camera_bus_type);
-
-static struct device_driver ic_drv = {
-	.name	= "camera",
-	.bus	= &soc_camera_bus_type,
-	.owner	= THIS_MODULE,
-};
-
-static void dummy_release(struct device *dev)
-{
-}
-
 static int default_cropcap(struct soc_camera_device *icd,
 			   struct v4l2_cropcap *a)
 {
@@ -1317,13 +1252,6 @@ static int default_enum_fsizes(struct soc_camera_device *icd,
 	return 0;
 }
 
-static void soc_camera_device_init(struct device *dev, void *pdata)
-{
-	dev->platform_data	= pdata;
-	dev->bus		= &soc_camera_bus_type;
-	dev->release		= dummy_release;
-}
-
 int soc_camera_host_register(struct soc_camera_host *ici)
 {
 	struct soc_camera_host *ix;
@@ -1389,24 +1317,9 @@ void soc_camera_host_unregister(struct soc_camera_host *ici)
 	mutex_lock(&list_lock);
 
 	list_del(&ici->list);
-
-	list_for_each_entry(icd, &devices, list) {
-		if (icd->iface == ici->nr) {
-			void *pdata = icd->dev.platform_data;
-			/* The bus->remove will be called */
-			device_unregister(&icd->dev);
-			/*
-			 * Not before device_unregister(), .remove
-			 * needs parent to call ici->ops->remove().
-			 * If the host module is loaded again, device_register()
-			 * would complain "already initialised," since 2.6.32
-			 * this is also needed to prevent use-after-free of the
-			 * device private data.
-			 */
-			memset(&icd->dev, 0, sizeof(icd->dev));
-			soc_camera_device_init(&icd->dev, pdata);
-		}
-	}
+	list_for_each_entry(icd, &devices, list)
+		if (icd->iface == ici->nr && to_soc_camera_control(icd))
+			soc_camera_remove(icd);
 
 	mutex_unlock(&list_lock);
 
@@ -1448,11 +1361,6 @@ static int soc_camera_device_register(struct soc_camera_device *icd)
 	return 0;
 }
 
-static void soc_camera_device_unregister(struct soc_camera_device *icd)
-{
-	list_del(&icd->list);
-}
-
 static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
 	.vidioc_querycap	 = soc_camera_querycap,
 	.vidioc_g_fmt_vid_cap    = soc_camera_g_fmt_vid_cap,
@@ -1487,7 +1395,7 @@ static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
 
 static int video_dev_create(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct video_device *vdev = video_device_alloc();
 
 	if (!vdev)
@@ -1495,12 +1403,13 @@ static int video_dev_create(struct soc_camera_device *icd)
 
 	strlcpy(vdev->name, ici->drv_name, sizeof(vdev->name));
 
-	vdev->parent		= &icd->dev;
+	vdev->parent		= icd->pdev;
 	vdev->current_norm	= V4L2_STD_UNKNOWN;
 	vdev->fops		= &soc_camera_fops;
 	vdev->ioctl_ops		= &soc_camera_ioctl_ops;
 	vdev->release		= video_device_release;
 	vdev->tvnorms		= V4L2_STD_UNKNOWN;
+	vdev->lock		= &icd->video_lock;
 
 	icd->vdev = vdev;
 
@@ -1515,7 +1424,7 @@ static int soc_camera_video_start(struct soc_camera_device *icd)
 	const struct device_type *type = icd->vdev->dev.type;
 	int ret;
 
-	if (!icd->dev.parent)
+	if (!icd->parent)
 		return -ENODEV;
 
 	if (!icd->ops ||
@@ -1525,7 +1434,7 @@ static int soc_camera_video_start(struct soc_camera_device *icd)
 
 	ret = video_register_device(icd->vdev, VFL_TYPE_GRABBER, -1);
 	if (ret < 0) {
-		dev_err(&icd->dev, "video_register_device failed: %d\n", ret);
+		dev_err(icd->pdev, "video_register_device failed: %d\n", ret);
 		return ret;
 	}
 
@@ -1549,6 +1458,7 @@ static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	icd->iface = icl->bus_id;
+	icd->link = icl;
 	icd->pdev = &pdev->dev;
 	platform_set_drvdata(pdev, icd);
 
@@ -1556,8 +1466,6 @@ static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto escdevreg;
 
-	soc_camera_device_init(&icd->dev, icl);
-
 	icd->user_width		= DEFAULT_WIDTH;
 	icd->user_height	= DEFAULT_HEIGHT;
 
@@ -1581,7 +1489,7 @@ static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev)
 	if (!icd)
 		return -EINVAL;
 
-	soc_camera_device_unregister(icd);
+	list_del(&icd->list);
 
 	kfree(icd);
 
@@ -1598,31 +1506,12 @@ static struct platform_driver __refdata soc_camera_pdrv = {
 
 static int __init soc_camera_init(void)
 {
-	int ret = bus_register(&soc_camera_bus_type);
-	if (ret)
-		return ret;
-	ret = driver_register(&ic_drv);
-	if (ret)
-		goto edrvr;
-
-	ret = platform_driver_probe(&soc_camera_pdrv, soc_camera_pdrv_probe);
-	if (ret)
-		goto epdr;
-
-	return 0;
-
-epdr:
-	driver_unregister(&ic_drv);
-edrvr:
-	bus_unregister(&soc_camera_bus_type);
-	return ret;
+	return platform_driver_probe(&soc_camera_pdrv, soc_camera_pdrv_probe);
 }
 
 static void __exit soc_camera_exit(void)
 {
 	platform_driver_unregister(&soc_camera_pdrv);
-	driver_unregister(&ic_drv);
-	bus_unregister(&soc_camera_bus_type);
 }
 
 module_init(soc_camera_init);
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index bf406e8..8069cd6 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -146,7 +146,7 @@ static int soc_camera_platform_probe(struct platform_device *pdev)
 	if (!p)
 		return -EINVAL;
 
-	if (!p->dev) {
+	if (!p->icd) {
 		dev_err(&pdev->dev,
 			"Platform has not set soc_camera_device pointer!\n");
 		return -EINVAL;
@@ -156,16 +156,16 @@ static int soc_camera_platform_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	icd = to_soc_camera_dev(p->dev);
+	icd = p->icd;
 
 	/* soc-camera convention: control's drvdata points to the subdev */
 	platform_set_drvdata(pdev, &priv->subdev);
 	/* Set the control device reference */
-	dev_set_drvdata(&icd->dev, &pdev->dev);
+	icd->control = &pdev->dev;
 
 	icd->ops = &soc_camera_platform_ops;
 
-	ici = to_soc_camera_host(icd->dev.parent);
+	ici = to_soc_camera_host(icd->parent);
 
 	v4l2_subdev_init(&priv->subdev, &platform_subdev_ops);
 	v4l2_set_subdevdata(&priv->subdev, p);
@@ -188,7 +188,7 @@ static int soc_camera_platform_remove(struct platform_device *pdev)
 {
 	struct soc_camera_platform_priv *priv = get_priv(pdev);
 	struct soc_camera_platform_info *p = pdev->dev.platform_data;
-	struct soc_camera_device *icd = to_soc_camera_dev(p->dev);
+	struct soc_camera_device *icd = p->icd;
 
 	v4l2_device_unregister_subdev(&priv->subdev);
 	icd->ops = NULL;
diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c
index c901721..8afb0e8 100644
--- a/drivers/media/video/sr030pc30.c
+++ b/drivers/media/video/sr030pc30.c
@@ -726,8 +726,10 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on)
 	const struct sr030pc30_platform_data *pdata = info->pdata;
 	int ret;
 
-	if (WARN(pdata == NULL, "No platform data!\n"))
-		return -ENOMEM;
+	if (pdata == NULL) {
+		WARN(1, "No platform data!\n");
+		return -EINVAL;
+	}
 
 	/*
 	 * Put sensor into power sleep mode before switching off
@@ -746,6 +748,7 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on)
 	if (on) {
 		ret = sr030pc30_base_config(sd);
 	} else {
+		ret = 0;
 		info->curr_win = NULL;
 		info->curr_fmt = NULL;
 	}
diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c
index 3941f95..bd21854 100644
--- a/drivers/media/video/tda7432.c
+++ b/drivers/media/video/tda7432.c
@@ -49,10 +49,11 @@ static int maxvol;
 static int loudness; /* disable loudness by default */
 static int debug;	 /* insmod parameter */
 module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Set debugging level from 0 to 3. Default is off(0).");
 module_param(loudness, int, S_IRUGO);
-MODULE_PARM_DESC(maxvol,"Set maximium volume to +20db (0), default is 0db(1)");
+MODULE_PARM_DESC(loudness, "Turn loudness on(1) else off(0). Default is off(0).");
 module_param(maxvol, int, S_IRUGO | S_IWUSR);
-
+MODULE_PARM_DESC(maxvol, "Set maximium volume to +20dB(0) else +0dB(1). Default is +20dB(0).");
 
 
 /* Structure of address and subaddresses for the tda7432 */
diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c
index fc611eb..84cd1b6 100644
--- a/drivers/media/video/timblogiw.c
+++ b/drivers/media/video/timblogiw.c
@@ -20,7 +20,6 @@
  * Timberdale FPGA LogiWin Video In
  */
 
-#include <linux/version.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/dmaengine.h>
diff --git a/drivers/media/video/tlg2300/pd-common.h b/drivers/media/video/tlg2300/pd-common.h
index 46066bd..56564e6 100644
--- a/drivers/media/video/tlg2300/pd-common.h
+++ b/drivers/media/video/tlg2300/pd-common.h
@@ -1,7 +1,6 @@
 #ifndef PD_COMMON_H
 #define PD_COMMON_H
 
-#include <linux/version.h>
 #include <linux/fs.h>
 #include <linux/wait.h>
 #include <linux/list.h>
diff --git a/drivers/media/video/tlg2300/pd-main.c b/drivers/media/video/tlg2300/pd-main.c
index 99c81a9..129f135 100644
--- a/drivers/media/video/tlg2300/pd-main.c
+++ b/drivers/media/video/tlg2300/pd-main.c
@@ -531,3 +531,4 @@ module_exit(poseidon_exit);
 MODULE_AUTHOR("Telegent Systems");
 MODULE_DESCRIPTION("For tlg2300-based USB device ");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.2");
diff --git a/drivers/media/video/tlg2300/pd-radio.c b/drivers/media/video/tlg2300/pd-radio.c
index fae84c2..4fad1df 100644
--- a/drivers/media/video/tlg2300/pd-radio.c
+++ b/drivers/media/video/tlg2300/pd-radio.c
@@ -6,7 +6,6 @@
 #include <linux/usb.h>
 #include <linux/i2c.h>
 #include <media/v4l2-dev.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <linux/mutex.h>
 #include <media/v4l2-ioctl.h>
@@ -149,7 +148,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "tele-radio", sizeof(v->driver));
 	strlcpy(v->card, "Telegent Poseidon", sizeof(v->card));
 	usb_make_path(p->udev, v->bus_info, sizeof(v->bus_info));
-	v->version = KERNEL_VERSION(0, 0, 1);
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index a03945a..11cc980 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -39,6 +39,7 @@
 #include "tda9887.h"
 #include "xc5000.h"
 #include "tda18271.h"
+#include "xc4000.h"
 
 #define UNSET (-1U)
 
@@ -391,6 +392,23 @@ static void set_type(struct i2c_client *c, unsigned int type,
 		tune_now = 0;
 		break;
 	}
+	case TUNER_XC4000:
+	{
+		struct xc4000_config xc4000_cfg = {
+			.i2c_address	  = t->i2c->addr,
+			/* FIXME: the correct parameters will be set */
+			/* only when the digital dvb_attach() occurs */
+			.default_pm	  = 0,
+			.dvb_amplitude	  = 0,
+			.set_smoothedcvbs = 0,
+			.if_khz		  = 0
+		};
+		if (!dvb_attach(xc4000_attach,
+				&t->fe, t->i2c->adapter, &xc4000_cfg))
+			goto attach_failed;
+		tune_now = 0;
+		break;
+	}
 	default:
 		if (!dvb_attach(simple_tuner_attach, &t->fe,
 				t->i2c->adapter, t->i2c->addr, t->type))
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 0347bbe..742482e 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -552,16 +552,6 @@ static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
 	return ret;
 }
 
-static int tw9910_enum_input(struct soc_camera_device *icd,
-			     struct v4l2_input *inp)
-{
-	inp->type = V4L2_INPUT_TYPE_TUNER;
-	inp->std  = V4L2_STD_UNKNOWN;
-	strcpy(inp->name, "Video");
-
-	return 0;
-}
-
 static int tw9910_g_chip_ident(struct v4l2_subdev *sd,
 			       struct v4l2_dbg_chip_ident *id)
 {
@@ -846,13 +836,9 @@ static int tw9910_video_probe(struct soc_camera_device *icd,
 	struct tw9910_priv *priv = to_tw9910(client);
 	s32 id;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * tw9910 only use 8 or 16 bit bus width
@@ -891,7 +877,6 @@ static int tw9910_video_probe(struct soc_camera_device *icd,
 static struct soc_camera_ops tw9910_ops = {
 	.set_bus_param		= tw9910_set_bus_param,
 	.query_bus_param	= tw9910_query_bus_param,
-	.enum_input		= tw9910_enum_input,
 };
 
 static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index ea8ea8a..5a74f5e 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -45,7 +45,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/timer.h>
@@ -77,15 +76,7 @@
 #define DRIVER_ALIAS "USBVision"
 #define DRIVER_DESC "USBVision USB Video Device Driver for Linux"
 #define DRIVER_LICENSE "GPL"
-#define USBVISION_DRIVER_VERSION_MAJOR 0
-#define USBVISION_DRIVER_VERSION_MINOR 9
-#define USBVISION_DRIVER_VERSION_PATCHLEVEL 10
-#define USBVISION_DRIVER_VERSION KERNEL_VERSION(USBVISION_DRIVER_VERSION_MAJOR,\
-USBVISION_DRIVER_VERSION_MINOR,\
-USBVISION_DRIVER_VERSION_PATCHLEVEL)
-#define USBVISION_VERSION_STRING __stringify(USBVISION_DRIVER_VERSION_MAJOR) \
-"." __stringify(USBVISION_DRIVER_VERSION_MINOR) \
-"." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL)
+#define USBVISION_VERSION_STRING "0.9.11"
 
 #define	ENABLE_HEXDUMP	0	/* Enable if you need it */
 
@@ -516,7 +507,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 		usbvision_device_data[usbvision->dev_model].model_string,
 		sizeof(vc->card));
 	usb_make_path(usbvision->dev, vc->bus_info, sizeof(vc->bus_info));
-	vc->version = USBVISION_DRIVER_VERSION;
 	vc->capabilities = V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_AUDIO |
 		V4L2_CAP_READWRITE |
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 2c8954e..10c2364 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -1664,8 +1664,8 @@ int uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
 		return -EINVAL;
 	}
 
-	/* Search for the matching (GUID/CS) control in the given device */
-	list_for_each_entry(entity, &dev->entities, list) {
+	/* Search for the matching (GUID/CS) control on the current chain */
+	list_for_each_entry(entity, &chain->entities, chain) {
 		unsigned int i;
 
 		if (UVC_ENTITY_TYPE(entity) != UVC_VC_EXTENSION_UNIT ||
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index b6eae48..d29f9c2 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -31,6 +31,7 @@
 #include <linux/videodev2.h>
 #include <linux/vmalloc.h>
 #include <linux/wait.h>
+#include <linux/version.h>
 #include <asm/atomic.h>
 #include <asm/unaligned.h>
 
@@ -1857,7 +1858,7 @@ static int uvc_probe(struct usb_interface *intf,
 			sizeof(dev->mdev.serial));
 	strcpy(dev->mdev.bus_info, udev->devpath);
 	dev->mdev.hw_revision = le16_to_cpu(udev->descriptor.bcdDevice);
-	dev->mdev.driver_version = DRIVER_VERSION_NUMBER;
+	dev->mdev.driver_version = LINUX_VERSION_CODE;
 	if (media_device_register(&dev->mdev) < 0)
 		goto error;
 
@@ -2130,6 +2131,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceProtocol	= 0,
 	  .driver_info 		= UVC_QUIRK_PROBE_MINMAX
 				| UVC_QUIRK_BUILTIN_ISIGHT },
+	/* Foxlink ("HP Webcam" on HP Mini 5103) */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x05c8,
+	  .idProduct		= 0x0403,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_FIX_BANDWIDTH },
 	/* Genesys Logic USB 2.0 PC Camera */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index dde6533..ea71d5f 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -83,7 +83,7 @@ static int uvc_ioctl_ctrl_map(struct uvc_video_chain *chain,
 	default:
 		uvc_trace(UVC_TRACE_CONTROL, "Unsupported V4L2 control type "
 			  "%u.\n", xmap->v4l2_type);
-		ret = -EINVAL;
+		ret = -ENOTTY;
 		goto done;
 	}
 
@@ -571,7 +571,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		strlcpy(cap->card, vdev->name, sizeof cap->card);
 		usb_make_path(stream->dev->udev,
 			      cap->bus_info, sizeof(cap->bus_info));
-		cap->version = DRIVER_VERSION_NUMBER;
+		cap->version = LINUX_VERSION_CODE;
 		if (stream->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
 			cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
 					  | V4L2_CAP_STREAMING;
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index 20107fd..df32a43 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -183,8 +183,7 @@ struct uvc_xu_control {
  * Driver specific constants.
  */
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(1, 1, 0)
-#define DRIVER_VERSION		"v1.1.0"
+#define DRIVER_VERSION		"1.1.1"
 
 /* Number of isochronous URBs. */
 #define UVC_URBS		5
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 06b9f9f..5c6100f 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -105,6 +105,9 @@ int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
 		    menu_items[ctrl->value][0] == '\0')
 			return -EINVAL;
 	}
+	if (qctrl->type == V4L2_CTRL_TYPE_BITMASK &&
+			(ctrl->value & ~qctrl->maximum))
+		return -ERANGE;
 	return 0;
 }
 EXPORT_SYMBOL(v4l2_ctrl_check);
diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index 7c26947..61979b7 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -662,6 +662,32 @@ static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext
 	return 0;
 }
 
+struct v4l2_event32 {
+	__u32				type;
+	union {
+		__u8			data[64];
+	} u;
+	__u32				pending;
+	__u32				sequence;
+	struct compat_timespec		timestamp;
+	__u32				id;
+	__u32				reserved[8];
+};
+
+static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up)
+{
+	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_event32)) ||
+		put_user(kp->type, &up->type) ||
+		copy_to_user(&up->u, &kp->u, sizeof(kp->u)) ||
+		put_user(kp->pending, &up->pending) ||
+		put_user(kp->sequence, &up->sequence) ||
+		put_compat_timespec(&kp->timestamp, &up->timestamp) ||
+		put_user(kp->id, &up->id) ||
+		copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32)))
+			return -EFAULT;
+	return 0;
+}
+
 #define VIDIOC_G_FMT32		_IOWR('V',  4, struct v4l2_format32)
 #define VIDIOC_S_FMT32		_IOWR('V',  5, struct v4l2_format32)
 #define VIDIOC_QUERYBUF32	_IOWR('V',  9, struct v4l2_buffer32)
@@ -675,6 +701,7 @@ static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext
 #define VIDIOC_G_EXT_CTRLS32    _IOWR('V', 71, struct v4l2_ext_controls32)
 #define VIDIOC_S_EXT_CTRLS32    _IOWR('V', 72, struct v4l2_ext_controls32)
 #define VIDIOC_TRY_EXT_CTRLS32  _IOWR('V', 73, struct v4l2_ext_controls32)
+#define	VIDIOC_DQEVENT32	_IOR ('V', 89, struct v4l2_event32)
 
 #define VIDIOC_OVERLAY32	_IOW ('V', 14, s32)
 #define VIDIOC_STREAMON32	_IOW ('V', 18, s32)
@@ -693,6 +720,7 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 		struct v4l2_input v2i;
 		struct v4l2_standard v2s;
 		struct v4l2_ext_controls v2ecs;
+		struct v4l2_event v2ev;
 		unsigned long vx;
 		int vi;
 	} karg;
@@ -715,6 +743,7 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 	case VIDIOC_G_EXT_CTRLS32: cmd = VIDIOC_G_EXT_CTRLS; break;
 	case VIDIOC_S_EXT_CTRLS32: cmd = VIDIOC_S_EXT_CTRLS; break;
 	case VIDIOC_TRY_EXT_CTRLS32: cmd = VIDIOC_TRY_EXT_CTRLS; break;
+	case VIDIOC_DQEVENT32: cmd = VIDIOC_DQEVENT; break;
 	case VIDIOC_OVERLAY32: cmd = VIDIOC_OVERLAY; break;
 	case VIDIOC_STREAMON32: cmd = VIDIOC_STREAMON; break;
 	case VIDIOC_STREAMOFF32: cmd = VIDIOC_STREAMOFF; break;
@@ -778,6 +807,9 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 		err = get_v4l2_ext_controls32(&karg.v2ecs, up);
 		compatible_arg = 0;
 		break;
+	case VIDIOC_DQEVENT:
+		compatible_arg = 0;
+		break;
 	}
 	if (err)
 		return err;
@@ -818,6 +850,10 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 		err = put_v4l2_framebuffer32(&karg.v2fb, up);
 		break;
 
+	case VIDIOC_DQEVENT:
+		err = put_v4l2_event32(&karg.v2ev, up);
+		break;
+
 	case VIDIOC_G_FMT:
 	case VIDIOC_S_FMT:
 	case VIDIOC_TRY_FMT:
@@ -920,6 +956,7 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 	case VIDIOC_S_DV_TIMINGS:
 	case VIDIOC_G_DV_TIMINGS:
 	case VIDIOC_DQEVENT:
+	case VIDIOC_DQEVENT32:
 	case VIDIOC_SUBSCRIBE_EVENT:
 	case VIDIOC_UNSUBSCRIBE_EVENT:
 		ret = do_video_ioctl(file, cmd, arg);
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index 2412f08..06b6014 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -23,17 +23,39 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
 #include <media/v4l2-dev.h>
 
+#define has_op(master, op) \
+	(master->ops && master->ops->op)
+#define call_op(master, op) \
+	(has_op(master, op) ? master->ops->op(master) : 0)
+
 /* Internal temporary helper struct, one for each v4l2_ext_control */
-struct ctrl_helper {
+struct v4l2_ctrl_helper {
+	/* Pointer to the control reference of the master control */
+	struct v4l2_ctrl_ref *mref;
 	/* The control corresponding to the v4l2_ext_control ID field. */
 	struct v4l2_ctrl *ctrl;
-	/* Used internally to mark whether this control was already
-	   processed. */
-	bool handled;
+	/* v4l2_ext_control index of the next control belonging to the
+	   same cluster, or 0 if there isn't any. */
+	u32 next;
 };
 
+/* Small helper function to determine if the autocluster is set to manual
+   mode. In that case the is_volatile flag should be ignored. */
+static bool is_cur_manual(const struct v4l2_ctrl *master)
+{
+	return master->is_auto && master->cur.val == master->manual_mode_value;
+}
+
+/* Same as above, but this checks the against the new value instead of the
+   current value. */
+static bool is_new_manual(const struct v4l2_ctrl *master)
+{
+	return master->is_auto && master->val == master->manual_mode_value;
+}
+
 /* Returns NULL or a character pointer array containing the menu for
    the given control ID. The pointer array ends with a NULL pointer.
    An empty string signifies a menu entry that is invalid. This allows
@@ -181,7 +203,7 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
 	};
 	static const char * const mpeg_stream_vbi_fmt[] = {
 		"No VBI",
-		"Private packet, IVTV format",
+		"Private Packet, IVTV Format",
 		NULL
 	};
 	static const char * const camera_power_line_frequency[] = {
@@ -204,18 +226,130 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
 		"Negative",
 		"Emboss",
 		"Sketch",
-		"Sky blue",
-		"Grass green",
-		"Skin whiten",
+		"Sky Blue",
+		"Grass Green",
+		"Skin Whiten",
 		"Vivid",
 		NULL
 	};
 	static const char * const tune_preemphasis[] = {
-		"No preemphasis",
+		"No Preemphasis",
 		"50 useconds",
 		"75 useconds",
 		NULL,
 	};
+	static const char * const header_mode[] = {
+		"Separate Buffer",
+		"Joined With 1st Frame",
+		NULL,
+	};
+	static const char * const multi_slice[] = {
+		"Single",
+		"Max Macroblocks",
+		"Max Bytes",
+		NULL,
+	};
+	static const char * const entropy_mode[] = {
+		"CAVLC",
+		"CABAC",
+		NULL,
+	};
+	static const char * const mpeg_h264_level[] = {
+		"1",
+		"1b",
+		"1.1",
+		"1.2",
+		"1.3",
+		"2",
+		"2.1",
+		"2.2",
+		"3",
+		"3.1",
+		"3.2",
+		"4",
+		"4.1",
+		"4.2",
+		"5",
+		"5.1",
+		NULL,
+	};
+	static const char * const h264_loop_filter[] = {
+		"Enabled",
+		"Disabled",
+		"Disabled at Slice Boundary",
+		NULL,
+	};
+	static const char * const h264_profile[] = {
+		"Baseline",
+		"Constrained Baseline",
+		"Main",
+		"Extended",
+		"High",
+		"High 10",
+		"High 422",
+		"High 444 Predictive",
+		"High 10 Intra",
+		"High 422 Intra",
+		"High 444 Intra",
+		"CAVLC 444 Intra",
+		"Scalable Baseline",
+		"Scalable High",
+		"Scalable High Intra",
+		"Multiview High",
+		NULL,
+	};
+	static const char * const vui_sar_idc[] = {
+		"Unspecified",
+		"1:1",
+		"12:11",
+		"10:11",
+		"16:11",
+		"40:33",
+		"24:11",
+		"20:11",
+		"32:11",
+		"80:33",
+		"18:11",
+		"15:11",
+		"64:33",
+		"160:99",
+		"4:3",
+		"3:2",
+		"2:1",
+		"Extended SAR",
+		NULL,
+	};
+	static const char * const mpeg_mpeg4_level[] = {
+		"0",
+		"0b",
+		"1",
+		"2",
+		"3",
+		"3b",
+		"4",
+		"5",
+		NULL,
+	};
+	static const char * const mpeg4_profile[] = {
+		"Simple",
+		"Adcanved Simple",
+		"Core",
+		"Simple Scalable",
+		"Advanced Coding Efficency",
+		NULL,
+	};
+
+	static const char * const flash_led_mode[] = {
+		"Off",
+		"Flash",
+		"Torch",
+		NULL,
+	};
+	static const char * const flash_strobe_source[] = {
+		"Software",
+		"External",
+		NULL,
+	};
 
 	switch (id) {
 	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
@@ -256,6 +390,28 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
 		return colorfx;
 	case V4L2_CID_TUNE_PREEMPHASIS:
 		return tune_preemphasis;
+	case V4L2_CID_FLASH_LED_MODE:
+		return flash_led_mode;
+	case V4L2_CID_FLASH_STROBE_SOURCE:
+		return flash_strobe_source;
+	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:
+		return header_mode;
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE:
+		return multi_slice;
+	case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE:
+		return entropy_mode;
+	case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
+		return mpeg_h264_level;
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE:
+		return h264_loop_filter;
+	case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
+		return h264_profile;
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC:
+		return vui_sar_idc;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:
+		return mpeg_mpeg4_level;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:
+		return mpeg4_profile;
 	default:
 		return NULL;
 	}
@@ -307,6 +463,8 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_CHROMA_GAIN:		return "Chroma Gain";
 	case V4L2_CID_ILLUMINATORS_1:		return "Illuminator 1";
 	case V4L2_CID_ILLUMINATORS_2:		return "Illuminator 2";
+	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:	return "Minimum Number of Capture Buffers";
+	case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:	return "Minimum Number of Output Buffers";
 
 	/* MPEG controls */
 	/* Keep the order of the 'case's the same as in videodev2.h! */
@@ -343,6 +501,48 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
 	case V4L2_CID_MPEG_VIDEO_MUTE:		return "Video Mute";
 	case V4L2_CID_MPEG_VIDEO_MUTE_YUV:	return "Video Mute YUV";
+	case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:	return "Decoder Slice Interface";
+	case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:	return "MPEG4 Loop Filter Enable";
+	case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB:	return "The Number of Intra Refresh MBs";
+	case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:		return "Frame Level Rate Control Enable";
+	case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:			return "H264 MB Level Rate Control";
+	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:			return "Sequence Header Mode";
+	case V4L2_CID_MPEG_VIDEO_MAX_REF_PIC:			return "The Max Number of Reference Picture";
+	case V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP:		return "H263 I-Frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP:		return "H263 P frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP:		return "H263 B frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H263_MIN_QP:			return "H263 Minimum QP Value";
+	case V4L2_CID_MPEG_VIDEO_H263_MAX_QP:			return "H263 Maximum QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP:		return "H264 I-Frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP:		return "H264 P frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP:		return "H264 B frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_MAX_QP:			return "H264 Maximum QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_MIN_QP:			return "H264 Minimum QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM:		return "H264 8x8 Transform Enable";
+	case V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE:			return "H264 CPB Buffer Size";
+	case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE:		return "H264 Entorpy Mode";
+	case V4L2_CID_MPEG_VIDEO_H264_I_PERIOD:			return "H264 I Period";
+	case V4L2_CID_MPEG_VIDEO_H264_LEVEL:			return "H264 Level";
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA:	return "H264 Loop Filter Alpha Offset";
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA:		return "H264 Loop Filter Beta Offset";
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE:		return "H264 Loop Filter Mode";
+	case V4L2_CID_MPEG_VIDEO_H264_PROFILE:			return "H264 Profile";
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT:	return "Vertical Size of SAR";
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH:	return "Horizontal Size of SAR";
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE:		return "Aspect Ratio VUI Enable";
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC:		return "VUI Aspect Ratio IDC";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP:		return "MPEG4 I-Frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP:		return "MPEG4 P frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP:		return "MPEG4 B frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP:			return "MPEG4 Minimum QP Value";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP:			return "MPEG4 Maximum QP Value";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:			return "MPEG4 Level";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:			return "MPEG4 Profile";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_QPEL:			return "Quarter Pixel Search Enable";
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES:		return "The Maximum Bytes Per Slice";
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB:		return "The Number of MB in a Slice";
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE:		return "The Slice Partitioning Method";
+	case V4L2_CID_MPEG_VIDEO_VBV_SIZE:			return "VBV Buffer Size";
 
 	/* CAMERA controls */
 	/* Keep the order of the 'case's the same as in videodev2.h! */
@@ -389,6 +589,21 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_TUNE_POWER_LEVEL:		return "Tune Power Level";
 	case V4L2_CID_TUNE_ANTENNA_CAPACITOR:	return "Tune Antenna Capacitor";
 
+	/* Flash controls */
+	case V4L2_CID_FLASH_CLASS:		return "Flash controls";
+	case V4L2_CID_FLASH_LED_MODE:		return "LED mode";
+	case V4L2_CID_FLASH_STROBE_SOURCE:	return "Strobe source";
+	case V4L2_CID_FLASH_STROBE:		return "Strobe";
+	case V4L2_CID_FLASH_STROBE_STOP:	return "Stop strobe";
+	case V4L2_CID_FLASH_STROBE_STATUS:	return "Strobe status";
+	case V4L2_CID_FLASH_TIMEOUT:		return "Strobe timeout";
+	case V4L2_CID_FLASH_INTENSITY:		return "Intensity, flash mode";
+	case V4L2_CID_FLASH_TORCH_INTENSITY:	return "Intensity, torch mode";
+	case V4L2_CID_FLASH_INDICATOR_INTENSITY: return "Intensity, indicator";
+	case V4L2_CID_FLASH_FAULT:		return "Faults";
+	case V4L2_CID_FLASH_CHARGE:		return "Charge";
+	case V4L2_CID_FLASH_READY:		return "Ready to strobe";
+
 	default:
 		return NULL;
 	}
@@ -423,12 +638,24 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_PILOT_TONE_ENABLED:
 	case V4L2_CID_ILLUMINATORS_1:
 	case V4L2_CID_ILLUMINATORS_2:
+	case V4L2_CID_FLASH_STROBE_STATUS:
+	case V4L2_CID_FLASH_CHARGE:
+	case V4L2_CID_FLASH_READY:
+	case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:
+	case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:
+	case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:
+	case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:
+	case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM:
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE:
+	case V4L2_CID_MPEG_VIDEO_MPEG4_QPEL:
 		*type = V4L2_CTRL_TYPE_BOOLEAN;
 		*min = 0;
 		*max = *step = 1;
 		break;
 	case V4L2_CID_PAN_RESET:
 	case V4L2_CID_TILT_RESET:
+	case V4L2_CID_FLASH_STROBE:
+	case V4L2_CID_FLASH_STROBE_STOP:
 		*type = V4L2_CTRL_TYPE_BUTTON;
 		*flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
 		*min = *max = *step = *def = 0;
@@ -452,6 +679,17 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_EXPOSURE_AUTO:
 	case V4L2_CID_COLORFX:
 	case V4L2_CID_TUNE_PREEMPHASIS:
+	case V4L2_CID_FLASH_LED_MODE:
+	case V4L2_CID_FLASH_STROBE_SOURCE:
+	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE:
+	case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE:
+	case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE:
+	case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC:
+	case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:
+	case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:
 		*type = V4L2_CTRL_TYPE_MENU;
 		break;
 	case V4L2_CID_RDS_TX_PS_NAME:
@@ -462,6 +700,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_CAMERA_CLASS:
 	case V4L2_CID_MPEG_CLASS:
 	case V4L2_CID_FM_TX_CLASS:
+	case V4L2_CID_FLASH_CLASS:
 		*type = V4L2_CTRL_TYPE_CTRL_CLASS;
 		/* You can neither read not write these */
 		*flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;
@@ -474,6 +713,14 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 		/* Max is calculated as RGB888 that is 2^24 */
 		*max = 0xFFFFFF;
 		break;
+	case V4L2_CID_FLASH_FAULT:
+		*type = V4L2_CTRL_TYPE_BITMASK;
+		break;
+	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
+	case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:
+		*type = V4L2_CTRL_TYPE_INTEGER;
+		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
+		break;
 	default:
 		*type = V4L2_CTRL_TYPE_INTEGER;
 		break;
@@ -519,6 +766,10 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_ZOOM_RELATIVE:
 		*flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
 		break;
+	case V4L2_CID_FLASH_STROBE_STATUS:
+	case V4L2_CID_FLASH_READY:
+		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
+		break;
 	}
 }
 EXPORT_SYMBOL(v4l2_ctrl_fill);
@@ -537,6 +788,42 @@ static bool type_is_int(const struct v4l2_ctrl *ctrl)
 	}
 }
 
+static void fill_event(struct v4l2_event *ev, struct v4l2_ctrl *ctrl, u32 changes)
+{
+	memset(ev->reserved, 0, sizeof(ev->reserved));
+	ev->type = V4L2_EVENT_CTRL;
+	ev->id = ctrl->id;
+	ev->u.ctrl.changes = changes;
+	ev->u.ctrl.type = ctrl->type;
+	ev->u.ctrl.flags = ctrl->flags;
+	if (ctrl->type == V4L2_CTRL_TYPE_STRING)
+		ev->u.ctrl.value64 = 0;
+	else
+		ev->u.ctrl.value64 = ctrl->cur.val64;
+	ev->u.ctrl.minimum = ctrl->minimum;
+	ev->u.ctrl.maximum = ctrl->maximum;
+	if (ctrl->type == V4L2_CTRL_TYPE_MENU)
+		ev->u.ctrl.step = 1;
+	else
+		ev->u.ctrl.step = ctrl->step;
+	ev->u.ctrl.default_value = ctrl->default_value;
+}
+
+static void send_event(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, u32 changes)
+{
+	struct v4l2_event ev;
+	struct v4l2_subscribed_event *sev;
+
+	if (list_empty(&ctrl->ev_subs))
+		return;
+	fill_event(&ev, ctrl, changes);
+
+	list_for_each_entry(sev, &ctrl->ev_subs, node)
+		if (sev->fh && (sev->fh != fh ||
+				(sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)))
+			v4l2_event_queue_fh(sev->fh, &ev);
+}
+
 /* Helper function: copy the current control value back to the caller */
 static int cur_to_user(struct v4l2_ext_control *c,
 		       struct v4l2_ctrl *ctrl)
@@ -624,22 +911,45 @@ static int new_to_user(struct v4l2_ext_control *c,
 }
 
 /* Copy the new value to the current value. */
-static void new_to_cur(struct v4l2_ctrl *ctrl)
+static void new_to_cur(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl,
+						bool update_inactive)
 {
+	bool changed = false;
+
 	if (ctrl == NULL)
 		return;
 	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_BUTTON:
+		changed = true;
+		break;
 	case V4L2_CTRL_TYPE_STRING:
 		/* strings are always 0-terminated */
+		changed = strcmp(ctrl->string, ctrl->cur.string);
 		strcpy(ctrl->cur.string, ctrl->string);
 		break;
 	case V4L2_CTRL_TYPE_INTEGER64:
+		changed = ctrl->val64 != ctrl->cur.val64;
 		ctrl->cur.val64 = ctrl->val64;
 		break;
 	default:
+		changed = ctrl->val != ctrl->cur.val;
 		ctrl->cur.val = ctrl->val;
 		break;
 	}
+	if (update_inactive) {
+		ctrl->flags &= ~V4L2_CTRL_FLAG_INACTIVE;
+		if (!is_cur_manual(ctrl->cluster[0]))
+			ctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
+	}
+	if (changed || update_inactive) {
+		/* If a control was changed that was not one of the controls
+		   modified by the application, then send the event to all. */
+		if (!ctrl->is_new)
+			fh = NULL;
+		send_event(fh, ctrl,
+			(changed ? V4L2_EVENT_CTRL_CH_VALUE : 0) |
+			(update_inactive ? V4L2_EVENT_CTRL_CH_FLAGS : 0));
+	}
 }
 
 /* Copy the current value to the new value */
@@ -692,13 +1002,11 @@ static int cluster_changed(struct v4l2_ctrl *master)
 	return diff;
 }
 
-/* Validate a new control */
-static int validate_new(struct v4l2_ctrl *ctrl)
+/* Validate integer-type control */
+static int validate_new_int(const struct v4l2_ctrl *ctrl, s32 *pval)
 {
-	s32 val = ctrl->val;
-	char *s = ctrl->string;
+	s32 val = *pval;
 	u32 offset;
-	size_t len;
 
 	switch (ctrl->type) {
 	case V4L2_CTRL_TYPE_INTEGER:
@@ -711,11 +1019,11 @@ static int validate_new(struct v4l2_ctrl *ctrl)
 		offset = val - ctrl->minimum;
 		offset = ctrl->step * (offset / ctrl->step);
 		val = ctrl->minimum + offset;
-		ctrl->val = val;
+		*pval = val;
 		return 0;
 
 	case V4L2_CTRL_TYPE_BOOLEAN:
-		ctrl->val = !!ctrl->val;
+		*pval = !!val;
 		return 0;
 
 	case V4L2_CTRL_TYPE_MENU:
@@ -726,11 +1034,35 @@ static int validate_new(struct v4l2_ctrl *ctrl)
 			return -EINVAL;
 		return 0;
 
+	case V4L2_CTRL_TYPE_BITMASK:
+		*pval &= ctrl->maximum;
+		return 0;
+
 	case V4L2_CTRL_TYPE_BUTTON:
 	case V4L2_CTRL_TYPE_CTRL_CLASS:
-		ctrl->val64 = 0;
+		*pval = 0;
 		return 0;
 
+	default:
+		return -EINVAL;
+	}
+}
+
+/* Validate a new control */
+static int validate_new(const struct v4l2_ctrl *ctrl, struct v4l2_ext_control *c)
+{
+	char *s = c->string;
+	size_t len;
+
+	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_INTEGER:
+	case V4L2_CTRL_TYPE_BOOLEAN:
+	case V4L2_CTRL_TYPE_MENU:
+	case V4L2_CTRL_TYPE_BITMASK:
+	case V4L2_CTRL_TYPE_BUTTON:
+	case V4L2_CTRL_TYPE_CTRL_CLASS:
+		return validate_new_int(ctrl, &c->value);
+
 	case V4L2_CTRL_TYPE_INTEGER64:
 		return 0;
 
@@ -780,6 +1112,7 @@ void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
 {
 	struct v4l2_ctrl_ref *ref, *next_ref;
 	struct v4l2_ctrl *ctrl, *next_ctrl;
+	struct v4l2_subscribed_event *sev, *next_sev;
 
 	if (hdl == NULL || hdl->buckets == NULL)
 		return;
@@ -793,6 +1126,8 @@ void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
 	/* Free all controls owned by the handler */
 	list_for_each_entry_safe(ctrl, next_ctrl, &hdl->ctrls, node) {
 		list_del(&ctrl->node);
+		list_for_each_entry_safe(sev, next_sev, &ctrl->ev_subs, node)
+			list_del(&sev->node);
 		kfree(ctrl);
 	}
 	kfree(hdl->buckets);
@@ -962,13 +1297,17 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 
 	/* Sanity checks */
 	if (id == 0 || name == NULL || id >= V4L2_CID_PRIVATE_BASE ||
-	    max < min ||
 	    (type == V4L2_CTRL_TYPE_INTEGER && step == 0) ||
+	    (type == V4L2_CTRL_TYPE_BITMASK && max == 0) ||
 	    (type == V4L2_CTRL_TYPE_MENU && qmenu == NULL) ||
 	    (type == V4L2_CTRL_TYPE_STRING && max == 0)) {
 		handler_set_err(hdl, -ERANGE);
 		return NULL;
 	}
+	if (type != V4L2_CTRL_TYPE_BITMASK && max < min) {
+		handler_set_err(hdl, -ERANGE);
+		return NULL;
+	}
 	if ((type == V4L2_CTRL_TYPE_INTEGER ||
 	     type == V4L2_CTRL_TYPE_MENU ||
 	     type == V4L2_CTRL_TYPE_BOOLEAN) &&
@@ -976,6 +1315,10 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 		handler_set_err(hdl, -ERANGE);
 		return NULL;
 	}
+	if (type == V4L2_CTRL_TYPE_BITMASK && ((def & ~max) || min || step)) {
+		handler_set_err(hdl, -ERANGE);
+		return NULL;
+	}
 
 	if (type == V4L2_CTRL_TYPE_BUTTON)
 		flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
@@ -991,6 +1334,7 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 	}
 
 	INIT_LIST_HEAD(&ctrl->node);
+	INIT_LIST_HEAD(&ctrl->ev_subs);
 	ctrl->handler = hdl;
 	ctrl->ops = ops;
 	ctrl->id = id;
@@ -1132,6 +1476,9 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
 		/* Skip handler-private controls. */
 		if (ctrl->is_private)
 			continue;
+		/* And control classes */
+		if (ctrl->type == V4L2_CTRL_TYPE_CTRL_CLASS)
+			continue;
 		ret = handler_new_ref(hdl, ctrl);
 		if (ret)
 			break;
@@ -1147,7 +1494,7 @@ void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls)
 	int i;
 
 	/* The first control is the master control and it must not be NULL */
-	BUG_ON(controls[0] == NULL);
+	BUG_ON(ncontrols == 0 || controls[0] == NULL);
 
 	for (i = 0; i < ncontrols; i++) {
 		if (controls[i]) {
@@ -1158,18 +1505,47 @@ void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls)
 }
 EXPORT_SYMBOL(v4l2_ctrl_cluster);
 
+void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls,
+			    u8 manual_val, bool set_volatile)
+{
+	struct v4l2_ctrl *master = controls[0];
+	u32 flag;
+	int i;
+
+	v4l2_ctrl_cluster(ncontrols, controls);
+	WARN_ON(ncontrols <= 1);
+	WARN_ON(manual_val < master->minimum || manual_val > master->maximum);
+	master->is_auto = true;
+	master->manual_mode_value = manual_val;
+	master->flags |= V4L2_CTRL_FLAG_UPDATE;
+	flag = is_cur_manual(master) ? 0 : V4L2_CTRL_FLAG_INACTIVE;
+
+	for (i = 1; i < ncontrols; i++)
+		if (controls[i]) {
+			controls[i]->is_volatile = set_volatile;
+			controls[i]->flags |= flag;
+		}
+}
+EXPORT_SYMBOL(v4l2_ctrl_auto_cluster);
+
 /* Activate/deactivate a control. */
 void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active)
 {
+	/* invert since the actual flag is called 'inactive' */
+	bool inactive = !active;
+	bool old;
+
 	if (ctrl == NULL)
 		return;
 
-	if (!active)
+	if (inactive)
 		/* set V4L2_CTRL_FLAG_INACTIVE */
-		set_bit(4, &ctrl->flags);
+		old = test_and_set_bit(4, &ctrl->flags);
 	else
 		/* clear V4L2_CTRL_FLAG_INACTIVE */
-		clear_bit(4, &ctrl->flags);
+		old = test_and_clear_bit(4, &ctrl->flags);
+	if (old != inactive)
+		send_event(NULL, ctrl, V4L2_EVENT_CTRL_CH_FLAGS);
 }
 EXPORT_SYMBOL(v4l2_ctrl_activate);
 
@@ -1181,15 +1557,21 @@ EXPORT_SYMBOL(v4l2_ctrl_activate);
    these controls. */
 void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed)
 {
+	bool old;
+
 	if (ctrl == NULL)
 		return;
 
+	v4l2_ctrl_lock(ctrl);
 	if (grabbed)
 		/* set V4L2_CTRL_FLAG_GRABBED */
-		set_bit(1, &ctrl->flags);
+		old = test_and_set_bit(1, &ctrl->flags);
 	else
 		/* clear V4L2_CTRL_FLAG_GRABBED */
-		clear_bit(1, &ctrl->flags);
+		old = test_and_clear_bit(1, &ctrl->flags);
+	if (old != grabbed)
+		send_event(NULL, ctrl, V4L2_EVENT_CTRL_CH_FLAGS);
+	v4l2_ctrl_unlock(ctrl);
 }
 EXPORT_SYMBOL(v4l2_ctrl_grab);
 
@@ -1217,6 +1599,9 @@ static void log_ctrl(const struct v4l2_ctrl *ctrl,
 	case V4L2_CTRL_TYPE_MENU:
 		printk(KERN_CONT "%s", ctrl->qmenu[ctrl->cur.val]);
 		break;
+	case V4L2_CTRL_TYPE_BITMASK:
+		printk(KERN_CONT "0x%08x", ctrl->cur.val);
+		break;
 	case V4L2_CTRL_TYPE_INTEGER64:
 		printk(KERN_CONT "%lld", ctrl->cur.val64);
 		break;
@@ -1277,26 +1662,21 @@ int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
 		int i;
 
 		/* Skip if this control was already handled by a cluster. */
-		if (ctrl->done)
+		/* Skip button controls and read-only controls. */
+		if (ctrl->done || ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
+		    (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
 			continue;
 
 		for (i = 0; i < master->ncontrols; i++) {
 			if (master->cluster[i]) {
 				cur_to_new(master->cluster[i]);
 				master->cluster[i]->is_new = 1;
+				master->cluster[i]->done = true;
 			}
 		}
-
-		/* Skip button controls and read-only controls. */
-		if (ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
-		    (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
-			continue;
-		ret = master->ops->s_ctrl(master);
+		ret = call_op(master, s_ctrl);
 		if (ret)
 			break;
-		for (i = 0; i < master->ncontrols; i++)
-			if (master->cluster[i])
-				master->cluster[i]->done = true;
 	}
 	mutex_unlock(&hdl->lock);
 	return ret;
@@ -1447,18 +1827,19 @@ EXPORT_SYMBOL(v4l2_subdev_querymenu);
    Find the controls in the control array and do some basic checks. */
 static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl,
 			     struct v4l2_ext_controls *cs,
-			     struct ctrl_helper *helpers,
-			     bool try)
+			     struct v4l2_ctrl_helper *helpers)
 {
+	struct v4l2_ctrl_helper *h;
+	bool have_clusters = false;
 	u32 i;
 
-	for (i = 0; i < cs->count; i++) {
+	for (i = 0, h = helpers; i < cs->count; i++, h++) {
 		struct v4l2_ext_control *c = &cs->controls[i];
+		struct v4l2_ctrl_ref *ref;
 		struct v4l2_ctrl *ctrl;
 		u32 id = c->id & V4L2_CTRL_ID_MASK;
 
-		if (try)
-			cs->error_idx = i;
+		cs->error_idx = i;
 
 		if (cs->ctrl_class && V4L2_CTRL_ID2CLASS(id) != cs->ctrl_class)
 			return -EINVAL;
@@ -1467,53 +1848,59 @@ static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl,
 		   extended controls */
 		if (id >= V4L2_CID_PRIVATE_BASE)
 			return -EINVAL;
-		ctrl = v4l2_ctrl_find(hdl, id);
-		if (ctrl == NULL)
+		ref = find_ref_lock(hdl, id);
+		if (ref == NULL)
 			return -EINVAL;
+		ctrl = ref->ctrl;
 		if (ctrl->flags & V4L2_CTRL_FLAG_DISABLED)
 			return -EINVAL;
 
-		helpers[i].ctrl = ctrl;
-		helpers[i].handled = false;
+		if (ctrl->cluster[0]->ncontrols > 1)
+			have_clusters = true;
+		if (ctrl->cluster[0] != ctrl)
+			ref = find_ref_lock(hdl, ctrl->cluster[0]->id);
+		/* Store the ref to the master control of the cluster */
+		h->mref = ref;
+		h->ctrl = ctrl;
+		/* Initially set next to 0, meaning that there is no other
+		   control in this helper array belonging to the same
+		   cluster */
+		h->next = 0;
 	}
-	return 0;
-}
 
-typedef int (*cluster_func)(struct v4l2_ext_control *c,
-			    struct v4l2_ctrl *ctrl);
+	/* We are done if there were no controls that belong to a multi-
+	   control cluster. */
+	if (!have_clusters)
+		return 0;
 
-/* Walk over all controls in v4l2_ext_controls belonging to the same cluster
-   and call the provided function. */
-static int cluster_walk(unsigned from,
-			struct v4l2_ext_controls *cs,
-			struct ctrl_helper *helpers,
-			cluster_func f)
-{
-	struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
-	int ret = 0;
-	int i;
+	/* The code below figures out in O(n) time which controls in the list
+	   belong to the same cluster. */
 
-	/* Find any controls from the same cluster and call the function */
-	for (i = from; !ret && i < cs->count; i++) {
-		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+	/* This has to be done with the handler lock taken. */
+	mutex_lock(&hdl->lock);
 
-		if (!helpers[i].handled && ctrl->cluster == cluster)
-			ret = f(&cs->controls[i], ctrl);
+	/* First zero the helper field in the master control references */
+	for (i = 0; i < cs->count; i++)
+		helpers[i].mref->helper = 0;
+	for (i = 0, h = helpers; i < cs->count; i++, h++) {
+		struct v4l2_ctrl_ref *mref = h->mref;
+
+		/* If the mref->helper is set, then it points to an earlier
+		   helper that belongs to the same cluster. */
+		if (mref->helper) {
+			/* Set the next field of mref->helper to the current
+			   index: this means that that earlier helper now
+			   points to the next helper in the same cluster. */
+			mref->helper->next = i;
+			/* mref should be set only for the first helper in the
+			   cluster, clear the others. */
+			h->mref = NULL;
+		}
+		/* Point the mref helper to the current helper struct. */
+		mref->helper = h;
 	}
-	return ret;
-}
-
-static void cluster_done(unsigned from,
-			 struct v4l2_ext_controls *cs,
-			 struct ctrl_helper *helpers)
-{
-	struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
-	int i;
-
-	/* Find any controls from the same cluster and mark them as handled */
-	for (i = from; i < cs->count; i++)
-		if (helpers[i].ctrl->cluster == cluster)
-			helpers[i].handled = true;
+	mutex_unlock(&hdl->lock);
+	return 0;
 }
 
 /* Handles the corner case where cs->count == 0. It checks whether the
@@ -1531,10 +1918,10 @@ static int class_check(struct v4l2_ctrl_handler *hdl, u32 ctrl_class)
 /* Get extended controls. Allocates the helpers array if needed. */
 int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
 {
-	struct ctrl_helper helper[4];
-	struct ctrl_helper *helpers = helper;
+	struct v4l2_ctrl_helper helper[4];
+	struct v4l2_ctrl_helper *helpers = helper;
 	int ret;
-	int i;
+	int i, j;
 
 	cs->error_idx = cs->count;
 	cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
@@ -1551,30 +1938,46 @@ int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs
 			return -ENOMEM;
 	}
 
-	ret = prepare_ext_ctrls(hdl, cs, helpers, false);
+	ret = prepare_ext_ctrls(hdl, cs, helpers);
+	cs->error_idx = cs->count;
 
 	for (i = 0; !ret && i < cs->count; i++)
 		if (helpers[i].ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
 			ret = -EACCES;
 
 	for (i = 0; !ret && i < cs->count; i++) {
-		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
-		struct v4l2_ctrl *master = ctrl->cluster[0];
+		int (*ctrl_to_user)(struct v4l2_ext_control *c,
+				    struct v4l2_ctrl *ctrl) = cur_to_user;
+		struct v4l2_ctrl *master;
 
-		if (helpers[i].handled)
+		if (helpers[i].mref == NULL)
 			continue;
 
+		master = helpers[i].mref->ctrl;
 		cs->error_idx = i;
 
 		v4l2_ctrl_lock(master);
-		/* g_volatile_ctrl will update the current control values */
-		if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
-			ret = master->ops->g_volatile_ctrl(master);
-		/* If OK, then copy the current control values to the caller */
-		if (!ret)
-			ret = cluster_walk(i, cs, helpers, cur_to_user);
+
+		/* g_volatile_ctrl will update the new control values */
+		if (has_op(master, g_volatile_ctrl) && !is_cur_manual(master)) {
+			for (j = 0; j < master->ncontrols; j++)
+				cur_to_new(master->cluster[j]);
+			ret = call_op(master, g_volatile_ctrl);
+			ctrl_to_user = new_to_user;
+		}
+		/* If OK, then copy the current (for non-volatile controls)
+		   or the new (for volatile controls) control values to the
+		   caller */
+		if (!ret) {
+			u32 idx = i;
+
+			do {
+				ret = ctrl_to_user(cs->controls + idx,
+						   helpers[idx].ctrl);
+				idx = helpers[idx].next;
+			} while (!ret && idx);
+		}
 		v4l2_ctrl_unlock(master);
-		cluster_done(i, cs, helpers);
 	}
 
 	if (cs->count > ARRAY_SIZE(helper))
@@ -1594,15 +1997,21 @@ static int get_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
 {
 	struct v4l2_ctrl *master = ctrl->cluster[0];
 	int ret = 0;
+	int i;
 
 	if (ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
 		return -EACCES;
 
 	v4l2_ctrl_lock(master);
 	/* g_volatile_ctrl will update the current control values */
-	if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
-		ret = master->ops->g_volatile_ctrl(master);
-	*val = ctrl->cur.val;
+	if (ctrl->is_volatile && !is_cur_manual(master)) {
+		for (i = 0; i < master->ncontrols; i++)
+			cur_to_new(master->cluster[i]);
+		ret = call_op(master, g_volatile_ctrl);
+		*val = ctrl->val;
+	} else {
+		*val = ctrl->cur.val;
+	}
 	v4l2_ctrl_unlock(master);
 	return ret;
 }
@@ -1638,72 +2047,61 @@ EXPORT_SYMBOL(v4l2_ctrl_g_ctrl);
 /* Core function that calls try/s_ctrl and ensures that the new value is
    copied to the current value on a set.
    Must be called with ctrl->handler->lock held. */
-static int try_or_set_control_cluster(struct v4l2_ctrl *master, bool set)
+static int try_or_set_cluster(struct v4l2_fh *fh,
+			      struct v4l2_ctrl *master, bool set)
 {
-	bool try = !set;
-	int ret = 0;
+	bool update_flag;
+	int ret;
 	int i;
 
 	/* Go through the cluster and either validate the new value or
 	   (if no new value was set), copy the current value to the new
 	   value, ensuring a consistent view for the control ops when
 	   called. */
-	for (i = 0; !ret && i < master->ncontrols; i++) {
+	for (i = 0; i < master->ncontrols; i++) {
 		struct v4l2_ctrl *ctrl = master->cluster[i];
 
 		if (ctrl == NULL)
 			continue;
 
-		if (ctrl->is_new) {
-			/* Double check this: it may have changed since the
-			   last check in try_or_set_ext_ctrls(). */
-			if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
-				return -EBUSY;
-
-			/* Validate if required */
-			if (!set)
-				ret = validate_new(ctrl);
+		if (!ctrl->is_new) {
+			cur_to_new(ctrl);
 			continue;
 		}
-		/* No new value was set, so copy the current and force
-		   a call to try_ctrl later, since the values for the cluster
-		   may now have changed and the end result might be invalid. */
-		try = true;
-		cur_to_new(ctrl);
+		/* Check again: it may have changed since the
+		   previous check in try_or_set_ext_ctrls(). */
+		if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
+			return -EBUSY;
 	}
 
-	/* For larger clusters you have to call try_ctrl again to
-	   verify that the controls are still valid after the
-	   'cur_to_new' above. */
-	if (!ret && master->ops->try_ctrl && try)
-		ret = master->ops->try_ctrl(master);
+	ret = call_op(master, try_ctrl);
 
 	/* Don't set if there is no change */
-	if (!ret && set && cluster_changed(master)) {
-		ret = master->ops->s_ctrl(master);
-		/* If OK, then make the new values permanent. */
-		if (!ret)
-			for (i = 0; i < master->ncontrols; i++)
-				new_to_cur(master->cluster[i]);
-	}
-	return ret;
+	if (ret || !set || !cluster_changed(master))
+		return ret;
+	ret = call_op(master, s_ctrl);
+	if (ret)
+		return ret;
+
+	/* If OK, then make the new values permanent. */
+	update_flag = is_cur_manual(master) != is_new_manual(master);
+	for (i = 0; i < master->ncontrols; i++)
+		new_to_cur(fh, master->cluster[i], update_flag && i > 0);
+	return 0;
 }
 
-/* Try or set controls. */
-static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
-				struct v4l2_ext_controls *cs,
-				struct ctrl_helper *helpers,
-				bool set)
+/* Validate controls. */
+static int validate_ctrls(struct v4l2_ext_controls *cs,
+			  struct v4l2_ctrl_helper *helpers, bool set)
 {
-	unsigned i, j;
+	unsigned i;
 	int ret = 0;
 
 	cs->error_idx = cs->count;
 	for (i = 0; i < cs->count; i++) {
 		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
 
-		if (!set)
-			cs->error_idx = i;
+		cs->error_idx = i;
 
 		if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
 			return -EACCES;
@@ -1715,50 +2113,22 @@ static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
 		   best-effort to avoid that. */
 		if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
 			return -EBUSY;
+		ret = validate_new(ctrl, &cs->controls[i]);
+		if (ret)
+			return ret;
 	}
-
-	for (i = 0; !ret && i < cs->count; i++) {
-		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
-		struct v4l2_ctrl *master = ctrl->cluster[0];
-
-		cs->error_idx = i;
-
-		if (helpers[i].handled)
-			continue;
-
-		v4l2_ctrl_lock(ctrl);
-
-		/* Reset the 'is_new' flags of the cluster */
-		for (j = 0; j < master->ncontrols; j++)
-			if (master->cluster[j])
-				master->cluster[j]->is_new = 0;
-
-		/* Copy the new caller-supplied control values.
-		   user_to_new() sets 'is_new' to 1. */
-		ret = cluster_walk(i, cs, helpers, user_to_new);
-
-		if (!ret)
-			ret = try_or_set_control_cluster(master, set);
-
-		/* Copy the new values back to userspace. */
-		if (!ret)
-			ret = cluster_walk(i, cs, helpers, new_to_user);
-
-		v4l2_ctrl_unlock(ctrl);
-		cluster_done(i, cs, helpers);
-	}
-	return ret;
+	return 0;
 }
 
 /* Try or try-and-set controls */
-static int try_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
+static int try_set_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
 			     struct v4l2_ext_controls *cs,
 			     bool set)
 {
-	struct ctrl_helper helper[4];
-	struct ctrl_helper *helpers = helper;
+	struct v4l2_ctrl_helper helper[4];
+	struct v4l2_ctrl_helper *helpers = helper;
+	unsigned i, j;
 	int ret;
-	int i;
 
 	cs->error_idx = cs->count;
 	cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
@@ -1774,25 +2144,49 @@ static int try_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
 		if (!helpers)
 			return -ENOMEM;
 	}
-	ret = prepare_ext_ctrls(hdl, cs, helpers, !set);
-	if (ret)
-		goto free;
-
-	/* First 'try' all controls and abort on error */
-	ret = try_or_set_ext_ctrls(hdl, cs, helpers, false);
-	/* If this is a 'set' operation and the initial 'try' failed,
-	   then set error_idx to count to tell the application that no
-	   controls changed value yet. */
-	if (set)
+	ret = prepare_ext_ctrls(hdl, cs, helpers);
+	if (!ret)
+		ret = validate_ctrls(cs, helpers, set);
+	if (ret && set)
 		cs->error_idx = cs->count;
-	if (!ret && set) {
-		/* Reset 'handled' state */
-		for (i = 0; i < cs->count; i++)
-			helpers[i].handled = false;
-		ret = try_or_set_ext_ctrls(hdl, cs, helpers, true);
+	for (i = 0; !ret && i < cs->count; i++) {
+		struct v4l2_ctrl *master;
+		u32 idx = i;
+
+		if (helpers[i].mref == NULL)
+			continue;
+
+		cs->error_idx = i;
+		master = helpers[i].mref->ctrl;
+		v4l2_ctrl_lock(master);
+
+		/* Reset the 'is_new' flags of the cluster */
+		for (j = 0; j < master->ncontrols; j++)
+			if (master->cluster[j])
+				master->cluster[j]->is_new = 0;
+
+		/* Copy the new caller-supplied control values.
+		   user_to_new() sets 'is_new' to 1. */
+		do {
+			ret = user_to_new(cs->controls + idx, helpers[idx].ctrl);
+			idx = helpers[idx].next;
+		} while (!ret && idx);
+
+		if (!ret)
+			ret = try_or_set_cluster(fh, master, set);
+
+		/* Copy the new values back to userspace. */
+		if (!ret) {
+			idx = i;
+			do {
+				ret = new_to_user(cs->controls + idx,
+						helpers[idx].ctrl);
+				idx = helpers[idx].next;
+			} while (!ret && idx);
+		}
+		v4l2_ctrl_unlock(master);
 	}
 
-free:
 	if (cs->count > ARRAY_SIZE(helper))
 		kfree(helpers);
 	return ret;
@@ -1800,37 +2194,39 @@ free:
 
 int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
 {
-	return try_set_ext_ctrls(hdl, cs, false);
+	return try_set_ext_ctrls(NULL, hdl, cs, false);
 }
 EXPORT_SYMBOL(v4l2_try_ext_ctrls);
 
-int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
+int v4l2_s_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+					struct v4l2_ext_controls *cs)
 {
-	return try_set_ext_ctrls(hdl, cs, true);
+	return try_set_ext_ctrls(fh, hdl, cs, true);
 }
 EXPORT_SYMBOL(v4l2_s_ext_ctrls);
 
 int v4l2_subdev_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
 {
-	return try_set_ext_ctrls(sd->ctrl_handler, cs, false);
+	return try_set_ext_ctrls(NULL, sd->ctrl_handler, cs, false);
 }
 EXPORT_SYMBOL(v4l2_subdev_try_ext_ctrls);
 
 int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
 {
-	return try_set_ext_ctrls(sd->ctrl_handler, cs, true);
+	return try_set_ext_ctrls(NULL, sd->ctrl_handler, cs, true);
 }
 EXPORT_SYMBOL(v4l2_subdev_s_ext_ctrls);
 
 /* Helper function for VIDIOC_S_CTRL compatibility */
-static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
+static int set_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, s32 *val)
 {
 	struct v4l2_ctrl *master = ctrl->cluster[0];
 	int ret;
 	int i;
 
-	if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
-		return -EACCES;
+	ret = validate_new_int(ctrl, val);
+	if (ret)
+		return ret;
 
 	v4l2_ctrl_lock(ctrl);
 
@@ -1841,28 +2237,30 @@ static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
 
 	ctrl->val = *val;
 	ctrl->is_new = 1;
-	ret = try_or_set_control_cluster(master, false);
-	if (!ret)
-		ret = try_or_set_control_cluster(master, true);
+	ret = try_or_set_cluster(fh, master, true);
 	*val = ctrl->cur.val;
 	v4l2_ctrl_unlock(ctrl);
 	return ret;
 }
 
-int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control)
+int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+					struct v4l2_control *control)
 {
 	struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id);
 
 	if (ctrl == NULL || !type_is_int(ctrl))
 		return -EINVAL;
 
-	return set_ctrl(ctrl, &control->value);
+	if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
+		return -EACCES;
+
+	return set_ctrl(fh, ctrl, &control->value);
 }
 EXPORT_SYMBOL(v4l2_s_ctrl);
 
 int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *control)
 {
-	return v4l2_s_ctrl(sd->ctrl_handler, control);
+	return v4l2_s_ctrl(NULL, sd->ctrl_handler, control);
 }
 EXPORT_SYMBOL(v4l2_subdev_s_ctrl);
 
@@ -1870,6 +2268,34 @@ int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val)
 {
 	/* It's a driver bug if this happens. */
 	WARN_ON(!type_is_int(ctrl));
-	return set_ctrl(ctrl, &val);
+	return set_ctrl(NULL, ctrl, &val);
 }
 EXPORT_SYMBOL(v4l2_ctrl_s_ctrl);
+
+void v4l2_ctrl_add_event(struct v4l2_ctrl *ctrl,
+				struct v4l2_subscribed_event *sev)
+{
+	v4l2_ctrl_lock(ctrl);
+	list_add_tail(&sev->node, &ctrl->ev_subs);
+	if (ctrl->type != V4L2_CTRL_TYPE_CTRL_CLASS &&
+	    (sev->flags & V4L2_EVENT_SUB_FL_SEND_INITIAL)) {
+		struct v4l2_event ev;
+		u32 changes = V4L2_EVENT_CTRL_CH_FLAGS;
+
+		if (!(ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY))
+			changes |= V4L2_EVENT_CTRL_CH_VALUE;
+		fill_event(&ev, ctrl, changes);
+		v4l2_event_queue_fh(sev->fh, &ev);
+	}
+	v4l2_ctrl_unlock(ctrl);
+}
+EXPORT_SYMBOL(v4l2_ctrl_add_event);
+
+void v4l2_ctrl_del_event(struct v4l2_ctrl *ctrl,
+				struct v4l2_subscribed_event *sev)
+{
+	v4l2_ctrl_lock(ctrl);
+	list_del(&sev->node);
+	v4l2_ctrl_unlock(ctrl);
+}
+EXPORT_SYMBOL(v4l2_ctrl_del_event);
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index 4aae501..c72856c 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -209,6 +209,7 @@ int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev)
 		vdev->v4l2_dev = v4l2_dev;
 		vdev->fops = &v4l2_subdev_fops;
 		vdev->release = video_device_release_empty;
+		vdev->ctrl_handler = sd->ctrl_handler;
 		err = __video_register_device(vdev, VFL_TYPE_SUBDEV, -1, 1,
 					      sd->owner);
 		if (err < 0)
diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c
index 69fd343..53b190c 100644
--- a/drivers/media/video/v4l2-event.c
+++ b/drivers/media/video/v4l2-event.c
@@ -25,100 +25,39 @@
 #include <media/v4l2-dev.h>
 #include <media/v4l2-fh.h>
 #include <media/v4l2-event.h>
+#include <media/v4l2-ctrls.h>
 
 #include <linux/sched.h>
 #include <linux/slab.h>
 
-int v4l2_event_init(struct v4l2_fh *fh)
+static unsigned sev_pos(const struct v4l2_subscribed_event *sev, unsigned idx)
 {
-	fh->events = kzalloc(sizeof(*fh->events), GFP_KERNEL);
-	if (fh->events == NULL)
-		return -ENOMEM;
-
-	init_waitqueue_head(&fh->events->wait);
-
-	INIT_LIST_HEAD(&fh->events->free);
-	INIT_LIST_HEAD(&fh->events->available);
-	INIT_LIST_HEAD(&fh->events->subscribed);
-
-	fh->events->sequence = -1;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(v4l2_event_init);
-
-int v4l2_event_alloc(struct v4l2_fh *fh, unsigned int n)
-{
-	struct v4l2_events *events = fh->events;
-	unsigned long flags;
-
-	if (!events) {
-		WARN_ON(1);
-		return -ENOMEM;
-	}
-
-	while (events->nallocated < n) {
-		struct v4l2_kevent *kev;
-
-		kev = kzalloc(sizeof(*kev), GFP_KERNEL);
-		if (kev == NULL)
-			return -ENOMEM;
-
-		spin_lock_irqsave(&fh->vdev->fh_lock, flags);
-		list_add_tail(&kev->list, &events->free);
-		events->nallocated++;
-		spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(v4l2_event_alloc);
-
-#define list_kfree(list, type, member)				\
-	while (!list_empty(list)) {				\
-		type *hi;					\
-		hi = list_first_entry(list, type, member);	\
-		list_del(&hi->member);				\
-		kfree(hi);					\
-	}
-
-void v4l2_event_free(struct v4l2_fh *fh)
-{
-	struct v4l2_events *events = fh->events;
-
-	if (!events)
-		return;
-
-	list_kfree(&events->free, struct v4l2_kevent, list);
-	list_kfree(&events->available, struct v4l2_kevent, list);
-	list_kfree(&events->subscribed, struct v4l2_subscribed_event, list);
-
-	kfree(events);
-	fh->events = NULL;
+	idx += sev->first;
+	return idx >= sev->elems ? idx - sev->elems : idx;
 }
-EXPORT_SYMBOL_GPL(v4l2_event_free);
 
 static int __v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event)
 {
-	struct v4l2_events *events = fh->events;
 	struct v4l2_kevent *kev;
 	unsigned long flags;
 
 	spin_lock_irqsave(&fh->vdev->fh_lock, flags);
 
-	if (list_empty(&events->available)) {
+	if (list_empty(&fh->available)) {
 		spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
 		return -ENOENT;
 	}
 
-	WARN_ON(events->navailable == 0);
+	WARN_ON(fh->navailable == 0);
 
-	kev = list_first_entry(&events->available, struct v4l2_kevent, list);
-	list_move(&kev->list, &events->free);
-	events->navailable--;
+	kev = list_first_entry(&fh->available, struct v4l2_kevent, list);
+	list_del(&kev->list);
+	fh->navailable--;
 
-	kev->event.pending = events->navailable;
+	kev->event.pending = fh->navailable;
 	*event = kev->event;
+	kev->sev->first = sev_pos(kev->sev, 1);
+	kev->sev->in_use--;
 
 	spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
 
@@ -128,7 +67,6 @@ static int __v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event)
 int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event,
 		       int nonblocking)
 {
-	struct v4l2_events *events = fh->events;
 	int ret;
 
 	if (nonblocking)
@@ -139,8 +77,8 @@ int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event,
 		mutex_unlock(fh->vdev->lock);
 
 	do {
-		ret = wait_event_interruptible(events->wait,
-					       events->navailable != 0);
+		ret = wait_event_interruptible(fh->wait,
+					       fh->navailable != 0);
 		if (ret < 0)
 			break;
 
@@ -154,23 +92,72 @@ int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event,
 }
 EXPORT_SYMBOL_GPL(v4l2_event_dequeue);
 
-/* Caller must hold fh->event->lock! */
+/* Caller must hold fh->vdev->fh_lock! */
 static struct v4l2_subscribed_event *v4l2_event_subscribed(
-	struct v4l2_fh *fh, u32 type)
+		struct v4l2_fh *fh, u32 type, u32 id)
 {
-	struct v4l2_events *events = fh->events;
 	struct v4l2_subscribed_event *sev;
 
 	assert_spin_locked(&fh->vdev->fh_lock);
 
-	list_for_each_entry(sev, &events->subscribed, list) {
-		if (sev->type == type)
+	list_for_each_entry(sev, &fh->subscribed, list)
+		if (sev->type == type && sev->id == id)
 			return sev;
-	}
 
 	return NULL;
 }
 
+static void __v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev,
+		const struct timespec *ts)
+{
+	struct v4l2_subscribed_event *sev;
+	struct v4l2_kevent *kev;
+	bool copy_payload = true;
+
+	/* Are we subscribed? */
+	sev = v4l2_event_subscribed(fh, ev->type, ev->id);
+	if (sev == NULL)
+		return;
+
+	/* Increase event sequence number on fh. */
+	fh->sequence++;
+
+	/* Do we have any free events? */
+	if (sev->in_use == sev->elems) {
+		/* no, remove the oldest one */
+		kev = sev->events + sev_pos(sev, 0);
+		list_del(&kev->list);
+		sev->in_use--;
+		sev->first = sev_pos(sev, 1);
+		fh->navailable--;
+		if (sev->elems == 1) {
+			if (sev->replace) {
+				sev->replace(&kev->event, ev);
+				copy_payload = false;
+			}
+		} else if (sev->merge) {
+			struct v4l2_kevent *second_oldest =
+				sev->events + sev_pos(sev, 0);
+			sev->merge(&kev->event, &second_oldest->event);
+		}
+	}
+
+	/* Take one and fill it. */
+	kev = sev->events + sev_pos(sev, sev->in_use);
+	kev->event.type = ev->type;
+	if (copy_payload)
+		kev->event.u = ev->u;
+	kev->event.id = ev->id;
+	kev->event.timestamp = *ts;
+	kev->event.sequence = fh->sequence;
+	sev->in_use++;
+	list_add_tail(&kev->list, &fh->available);
+
+	fh->navailable++;
+
+	wake_up_all(&fh->wait);
+}
+
 void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev)
 {
 	struct v4l2_fh *fh;
@@ -181,81 +168,95 @@ void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev)
 
 	spin_lock_irqsave(&vdev->fh_lock, flags);
 
-	list_for_each_entry(fh, &vdev->fh_list, list) {
-		struct v4l2_events *events = fh->events;
-		struct v4l2_kevent *kev;
+	list_for_each_entry(fh, &vdev->fh_list, list)
+		__v4l2_event_queue_fh(fh, ev, &timestamp);
 
-		/* Are we subscribed? */
-		if (!v4l2_event_subscribed(fh, ev->type))
-			continue;
+	spin_unlock_irqrestore(&vdev->fh_lock, flags);
+}
+EXPORT_SYMBOL_GPL(v4l2_event_queue);
 
-		/* Increase event sequence number on fh. */
-		events->sequence++;
+void v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev)
+{
+	unsigned long flags;
+	struct timespec timestamp;
 
-		/* Do we have any free events? */
-		if (list_empty(&events->free))
-			continue;
+	ktime_get_ts(&timestamp);
 
-		/* Take one and fill it. */
-		kev = list_first_entry(&events->free, struct v4l2_kevent, list);
-		kev->event.type = ev->type;
-		kev->event.u = ev->u;
-		kev->event.timestamp = timestamp;
-		kev->event.sequence = events->sequence;
-		list_move_tail(&kev->list, &events->available);
+	spin_lock_irqsave(&fh->vdev->fh_lock, flags);
+	__v4l2_event_queue_fh(fh, ev, &timestamp);
+	spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
+}
+EXPORT_SYMBOL_GPL(v4l2_event_queue_fh);
 
-		events->navailable++;
+int v4l2_event_pending(struct v4l2_fh *fh)
+{
+	return fh->navailable;
+}
+EXPORT_SYMBOL_GPL(v4l2_event_pending);
 
-		wake_up_all(&events->wait);
-	}
+static void ctrls_replace(struct v4l2_event *old, const struct v4l2_event *new)
+{
+	u32 old_changes = old->u.ctrl.changes;
 
-	spin_unlock_irqrestore(&vdev->fh_lock, flags);
+	old->u.ctrl = new->u.ctrl;
+	old->u.ctrl.changes |= old_changes;
 }
-EXPORT_SYMBOL_GPL(v4l2_event_queue);
 
-int v4l2_event_pending(struct v4l2_fh *fh)
+static void ctrls_merge(const struct v4l2_event *old, struct v4l2_event *new)
 {
-	return fh->events->navailable;
+	new->u.ctrl.changes |= old->u.ctrl.changes;
 }
-EXPORT_SYMBOL_GPL(v4l2_event_pending);
 
 int v4l2_event_subscribe(struct v4l2_fh *fh,
-			 struct v4l2_event_subscription *sub)
+			 struct v4l2_event_subscription *sub, unsigned elems)
 {
-	struct v4l2_events *events = fh->events;
-	struct v4l2_subscribed_event *sev;
+	struct v4l2_subscribed_event *sev, *found_ev;
+	struct v4l2_ctrl *ctrl = NULL;
 	unsigned long flags;
-
-	if (fh->events == NULL) {
-		WARN_ON(1);
-		return -ENOMEM;
+	unsigned i;
+
+	if (elems < 1)
+		elems = 1;
+	if (sub->type == V4L2_EVENT_CTRL) {
+		ctrl = v4l2_ctrl_find(fh->ctrl_handler, sub->id);
+		if (ctrl == NULL)
+			return -EINVAL;
 	}
 
-	sev = kmalloc(sizeof(*sev), GFP_KERNEL);
+	sev = kzalloc(sizeof(*sev) + sizeof(struct v4l2_kevent) * elems, GFP_KERNEL);
 	if (!sev)
 		return -ENOMEM;
-
-	spin_lock_irqsave(&fh->vdev->fh_lock, flags);
-
-	if (v4l2_event_subscribed(fh, sub->type) == NULL) {
-		INIT_LIST_HEAD(&sev->list);
-		sev->type = sub->type;
-
-		list_add(&sev->list, &events->subscribed);
-		sev = NULL;
+	for (i = 0; i < elems; i++)
+		sev->events[i].sev = sev;
+	sev->type = sub->type;
+	sev->id = sub->id;
+	sev->flags = sub->flags;
+	sev->fh = fh;
+	sev->elems = elems;
+	if (ctrl) {
+		sev->replace = ctrls_replace;
+		sev->merge = ctrls_merge;
 	}
 
+	spin_lock_irqsave(&fh->vdev->fh_lock, flags);
+	found_ev = v4l2_event_subscribed(fh, sub->type, sub->id);
+	if (!found_ev)
+		list_add(&sev->list, &fh->subscribed);
 	spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
 
-	kfree(sev);
+	/* v4l2_ctrl_add_event uses a mutex, so do this outside the spin lock */
+	if (found_ev)
+		kfree(sev);
+	else if (ctrl)
+		v4l2_ctrl_add_event(ctrl, sev);
 
 	return 0;
 }
 EXPORT_SYMBOL_GPL(v4l2_event_subscribe);
 
-static void v4l2_event_unsubscribe_all(struct v4l2_fh *fh)
+void v4l2_event_unsubscribe_all(struct v4l2_fh *fh)
 {
-	struct v4l2_events *events = fh->events;
+	struct v4l2_event_subscription sub;
 	struct v4l2_subscribed_event *sev;
 	unsigned long flags;
 
@@ -263,15 +264,18 @@ static void v4l2_event_unsubscribe_all(struct v4l2_fh *fh)
 		sev = NULL;
 
 		spin_lock_irqsave(&fh->vdev->fh_lock, flags);
-		if (!list_empty(&events->subscribed)) {
-			sev = list_first_entry(&events->subscribed,
-				       struct v4l2_subscribed_event, list);
-			list_del(&sev->list);
+		if (!list_empty(&fh->subscribed)) {
+			sev = list_first_entry(&fh->subscribed,
+					struct v4l2_subscribed_event, list);
+			sub.type = sev->type;
+			sub.id = sev->id;
 		}
 		spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
-		kfree(sev);
+		if (sev)
+			v4l2_event_unsubscribe(fh, &sub);
 	} while (sev);
 }
+EXPORT_SYMBOL_GPL(v4l2_event_unsubscribe_all);
 
 int v4l2_event_unsubscribe(struct v4l2_fh *fh,
 			   struct v4l2_event_subscription *sub)
@@ -286,11 +290,19 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh,
 
 	spin_lock_irqsave(&fh->vdev->fh_lock, flags);
 
-	sev = v4l2_event_subscribed(fh, sub->type);
-	if (sev != NULL)
+	sev = v4l2_event_subscribed(fh, sub->type, sub->id);
+	if (sev != NULL) {
 		list_del(&sev->list);
+		sev->fh = NULL;
+	}
 
 	spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
+	if (sev && sev->type == V4L2_EVENT_CTRL) {
+		struct v4l2_ctrl *ctrl = v4l2_ctrl_find(fh->ctrl_handler, sev->id);
+
+		if (ctrl)
+			v4l2_ctrl_del_event(ctrl, sev);
+	}
 
 	kfree(sev);
 
diff --git a/drivers/media/video/v4l2-fh.c b/drivers/media/video/v4l2-fh.c
index 717f71e..122822d 100644
--- a/drivers/media/video/v4l2-fh.c
+++ b/drivers/media/video/v4l2-fh.c
@@ -29,23 +29,18 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-ioctl.h>
 
-int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev)
+void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev)
 {
 	fh->vdev = vdev;
+	/* Inherit from video_device. May be overridden by the driver. */
+	fh->ctrl_handler = vdev->ctrl_handler;
 	INIT_LIST_HEAD(&fh->list);
 	set_bit(V4L2_FL_USES_V4L2_FH, &fh->vdev->flags);
 	fh->prio = V4L2_PRIORITY_UNSET;
-
-	/*
-	 * fh->events only needs to be initialized if the driver
-	 * supports the VIDIOC_SUBSCRIBE_EVENT ioctl.
-	 */
-	if (vdev->ioctl_ops && vdev->ioctl_ops->vidioc_subscribe_event)
-		return v4l2_event_init(fh);
-
-	fh->events = NULL;
-
-	return 0;
+	init_waitqueue_head(&fh->wait);
+	INIT_LIST_HEAD(&fh->available);
+	INIT_LIST_HEAD(&fh->subscribed);
+	fh->sequence = -1;
 }
 EXPORT_SYMBOL_GPL(v4l2_fh_init);
 
@@ -91,10 +86,8 @@ void v4l2_fh_exit(struct v4l2_fh *fh)
 {
 	if (fh->vdev == NULL)
 		return;
-
+	v4l2_event_unsubscribe_all(fh);
 	fh->vdev = NULL;
-
-	v4l2_event_free(fh);
 }
 EXPORT_SYMBOL_GPL(v4l2_fh_exit);
 
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 69e8c6f..002ce13 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/version.h>
 
 #include <linux/videodev2.h>
 
@@ -542,12 +543,12 @@ static long __video_do_ioctl(struct file *file,
 	struct v4l2_fh *vfh = NULL;
 	struct v4l2_format f_copy;
 	int use_fh_prio = 0;
-	long ret = -EINVAL;
+	long ret = -ENOTTY;
 
 	if (ops == NULL) {
 		printk(KERN_WARNING "videodev: \"%s\" has no ioctl_ops.\n",
 				vfd->name);
-		return -EINVAL;
+		return ret;
 	}
 
 	if ((vfd->debug & V4L2_DEBUG_IOCTL) &&
@@ -605,6 +606,7 @@ static long __video_do_ioctl(struct file *file,
 		if (!ops->vidioc_querycap)
 			break;
 
+		cap->version = LINUX_VERSION_CODE;
 		ret = ops->vidioc_querycap(file, fh, cap);
 		if (!ret)
 			dbgarg(cmd, "driver=%s, card=%s, bus=%s, "
@@ -1418,7 +1420,9 @@ static long __video_do_ioctl(struct file *file,
 	{
 		struct v4l2_queryctrl *p = arg;
 
-		if (vfd->ctrl_handler)
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_queryctrl(vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
 			ret = v4l2_queryctrl(vfd->ctrl_handler, p);
 		else if (ops->vidioc_queryctrl)
 			ret = ops->vidioc_queryctrl(file, fh, p);
@@ -1438,7 +1442,9 @@ static long __video_do_ioctl(struct file *file,
 	{
 		struct v4l2_control *p = arg;
 
-		if (vfd->ctrl_handler)
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_g_ctrl(vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
 			ret = v4l2_g_ctrl(vfd->ctrl_handler, p);
 		else if (ops->vidioc_g_ctrl)
 			ret = ops->vidioc_g_ctrl(file, fh, p);
@@ -1470,14 +1476,18 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls ctrls;
 		struct v4l2_ext_control ctrl;
 
-		if (!vfd->ctrl_handler &&
+		if (!(vfh && vfh->ctrl_handler) && !vfd->ctrl_handler &&
 			!ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls)
 			break;
 
 		dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
 
+		if (vfh && vfh->ctrl_handler) {
+			ret = v4l2_s_ctrl(vfh, vfh->ctrl_handler, p);
+			break;
+		}
 		if (vfd->ctrl_handler) {
-			ret = v4l2_s_ctrl(vfd->ctrl_handler, p);
+			ret = v4l2_s_ctrl(NULL, vfd->ctrl_handler, p);
 			break;
 		}
 		if (ops->vidioc_s_ctrl) {
@@ -1501,7 +1511,9 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls *p = arg;
 
 		p->error_idx = p->count;
-		if (vfd->ctrl_handler)
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_g_ext_ctrls(vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
 			ret = v4l2_g_ext_ctrls(vfd->ctrl_handler, p);
 		else if (ops->vidioc_g_ext_ctrls && check_ext_ctrls(p, 0))
 			ret = ops->vidioc_g_ext_ctrls(file, fh, p);
@@ -1515,11 +1527,14 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls *p = arg;
 
 		p->error_idx = p->count;
-		if (!vfd->ctrl_handler && !ops->vidioc_s_ext_ctrls)
+		if (!(vfh && vfh->ctrl_handler) && !vfd->ctrl_handler &&
+				!ops->vidioc_s_ext_ctrls)
 			break;
 		v4l_print_ext_ctrls(cmd, vfd, p, 1);
-		if (vfd->ctrl_handler)
-			ret = v4l2_s_ext_ctrls(vfd->ctrl_handler, p);
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_s_ext_ctrls(vfh, vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
+			ret = v4l2_s_ext_ctrls(NULL, vfd->ctrl_handler, p);
 		else if (check_ext_ctrls(p, 0))
 			ret = ops->vidioc_s_ext_ctrls(file, fh, p);
 		break;
@@ -1529,10 +1544,13 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls *p = arg;
 
 		p->error_idx = p->count;
-		if (!vfd->ctrl_handler && !ops->vidioc_try_ext_ctrls)
+		if (!(vfh && vfh->ctrl_handler) && !vfd->ctrl_handler &&
+				!ops->vidioc_try_ext_ctrls)
 			break;
 		v4l_print_ext_ctrls(cmd, vfd, p, 1);
-		if (vfd->ctrl_handler)
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_try_ext_ctrls(vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
 			ret = v4l2_try_ext_ctrls(vfd->ctrl_handler, p);
 		else if (check_ext_ctrls(p, 0))
 			ret = ops->vidioc_try_ext_ctrls(file, fh, p);
@@ -1542,7 +1560,9 @@ static long __video_do_ioctl(struct file *file,
 	{
 		struct v4l2_querymenu *p = arg;
 
-		if (vfd->ctrl_handler)
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_querymenu(vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
 			ret = v4l2_querymenu(vfd->ctrl_handler, p);
 		else if (ops->vidioc_querymenu)
 			ret = ops->vidioc_querymenu(file, fh, p);
@@ -2276,7 +2296,7 @@ static int check_array_args(unsigned int cmd, void *parg, size_t *array_size,
 				break;
 			}
 			*user_ptr = (void __user *)buf->m.planes;
-			*kernel_ptr = (void **)&buf->m.planes;
+			*kernel_ptr = (void *)&buf->m.planes;
 			*array_size = sizeof(struct v4l2_plane) * buf->length;
 			ret = 1;
 		}
@@ -2290,7 +2310,7 @@ static int check_array_args(unsigned int cmd, void *parg, size_t *array_size,
 
 		if (ctrls->count != 0) {
 			*user_ptr = (void __user *)ctrls->controls;
-			*kernel_ptr = (void **)&ctrls->controls;
+			*kernel_ptr = (void *)&ctrls->controls;
 			*array_size = sizeof(struct v4l2_ext_control)
 				    * ctrls->count;
 			ret = 1;
diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c
index 812729e..b7967c9 100644
--- a/drivers/media/video/v4l2-subdev.c
+++ b/drivers/media/video/v4l2-subdev.c
@@ -75,20 +75,7 @@ static int subdev_open(struct file *file)
 		return ret;
 	}
 
-	ret = v4l2_fh_init(&subdev_fh->vfh, vdev);
-	if (ret)
-		goto err;
-
-	if (sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) {
-		ret = v4l2_event_init(&subdev_fh->vfh);
-		if (ret)
-			goto err;
-
-		ret = v4l2_event_alloc(&subdev_fh->vfh, sd->nevents);
-		if (ret)
-			goto err;
-	}
-
+	v4l2_fh_init(&subdev_fh->vfh, vdev);
 	v4l2_fh_add(&subdev_fh->vfh);
 	file->private_data = &subdev_fh->vfh;
 #if defined(CONFIG_MEDIA_CONTROLLER)
@@ -155,25 +142,25 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 	switch (cmd) {
 	case VIDIOC_QUERYCTRL:
-		return v4l2_queryctrl(sd->ctrl_handler, arg);
+		return v4l2_queryctrl(vfh->ctrl_handler, arg);
 
 	case VIDIOC_QUERYMENU:
-		return v4l2_querymenu(sd->ctrl_handler, arg);
+		return v4l2_querymenu(vfh->ctrl_handler, arg);
 
 	case VIDIOC_G_CTRL:
-		return v4l2_g_ctrl(sd->ctrl_handler, arg);
+		return v4l2_g_ctrl(vfh->ctrl_handler, arg);
 
 	case VIDIOC_S_CTRL:
-		return v4l2_s_ctrl(sd->ctrl_handler, arg);
+		return v4l2_s_ctrl(vfh, vfh->ctrl_handler, arg);
 
 	case VIDIOC_G_EXT_CTRLS:
-		return v4l2_g_ext_ctrls(sd->ctrl_handler, arg);
+		return v4l2_g_ext_ctrls(vfh->ctrl_handler, arg);
 
 	case VIDIOC_S_EXT_CTRLS:
-		return v4l2_s_ext_ctrls(sd->ctrl_handler, arg);
+		return v4l2_s_ext_ctrls(vfh, vfh->ctrl_handler, arg);
 
 	case VIDIOC_TRY_EXT_CTRLS:
-		return v4l2_try_ext_ctrls(sd->ctrl_handler, arg);
+		return v4l2_try_ext_ctrls(vfh->ctrl_handler, arg);
 
 	case VIDIOC_DQEVENT:
 		if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS))
@@ -297,7 +284,7 @@ static unsigned int subdev_poll(struct file *file, poll_table *wait)
 	if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS))
 		return POLLERR;
 
-	poll_wait(file, &fh->events->wait, wait);
+	poll_wait(file, &fh->wait, wait);
 
 	if (v4l2_event_pending(fh))
 		return POLLPRI;
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index ddb8f4b..f300dea 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -108,8 +108,9 @@ static struct scatterlist *videobuf_pages_to_sg(struct page **pages,
 	if (PageHighMem(pages[0]))
 		/* DMA to highmem pages might not work */
 		goto highmem;
-	sg_set_page(&sglist[0], pages[0], PAGE_SIZE - offset, offset);
-	size -= PAGE_SIZE - offset;
+	sg_set_page(&sglist[0], pages[0],
+			min_t(size_t, PAGE_SIZE - offset, size), offset);
+	size -= min_t(size_t, PAGE_SIZE - offset, size);
 	for (i = 1; i < nr_pages; i++) {
 		if (NULL == pages[i])
 			goto nopage;
diff --git a/drivers/media/video/videobuf2-dma-sg.c b/drivers/media/video/videobuf2-dma-sg.c
index 10a20d9..065f468 100644
--- a/drivers/media/video/videobuf2-dma-sg.c
+++ b/drivers/media/video/videobuf2-dma-sg.c
@@ -48,12 +48,10 @@ static void *vb2_dma_sg_alloc(void *alloc_ctx, unsigned long size)
 	buf->sg_desc.size = size;
 	buf->sg_desc.num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
 
-	buf->sg_desc.sglist = vmalloc(buf->sg_desc.num_pages *
+	buf->sg_desc.sglist = vzalloc(buf->sg_desc.num_pages *
 				      sizeof(*buf->sg_desc.sglist));
 	if (!buf->sg_desc.sglist)
 		goto fail_sglist_alloc;
-	memset(buf->sg_desc.sglist, 0, buf->sg_desc.num_pages *
-	       sizeof(*buf->sg_desc.sglist));
 	sg_init_table(buf->sg_desc.sglist, buf->sg_desc.num_pages);
 
 	buf->pages = kzalloc(buf->sg_desc.num_pages * sizeof(struct page *),
@@ -136,13 +134,11 @@ static void *vb2_dma_sg_get_userptr(void *alloc_ctx, unsigned long vaddr,
 	last  = ((vaddr + size - 1) & PAGE_MASK) >> PAGE_SHIFT;
 	buf->sg_desc.num_pages = last - first + 1;
 
-	buf->sg_desc.sglist = vmalloc(
+	buf->sg_desc.sglist = vzalloc(
 		buf->sg_desc.num_pages * sizeof(*buf->sg_desc.sglist));
 	if (!buf->sg_desc.sglist)
 		goto userptr_fail_sglist_alloc;
 
-	memset(buf->sg_desc.sglist, 0,
-		buf->sg_desc.num_pages * sizeof(*buf->sg_desc.sglist));
 	sg_init_table(buf->sg_desc.sglist, buf->sg_desc.num_pages);
 
 	buf->pages = kzalloc(buf->sg_desc.num_pages * sizeof(struct page *),
diff --git a/drivers/media/video/videobuf2-memops.c b/drivers/media/video/videobuf2-memops.c
index b03c3ae..569eeb3 100644
--- a/drivers/media/video/videobuf2-memops.c
+++ b/drivers/media/video/videobuf2-memops.c
@@ -176,7 +176,7 @@ int vb2_mmap_pfn_range(struct vm_area_struct *vma, unsigned long paddr,
 
 	vma->vm_ops->open(vma);
 
-	printk(KERN_DEBUG "%s: mapped paddr 0x%08lx at 0x%08lx, size %ld\n",
+	pr_debug("%s: mapped paddr 0x%08lx at 0x%08lx, size %ld\n",
 			__func__, paddr, vma->vm_start, size);
 
 	return 0;
@@ -194,7 +194,7 @@ static void vb2_common_vm_open(struct vm_area_struct *vma)
 {
 	struct vb2_vmarea_handler *h = vma->vm_private_data;
 
-	printk(KERN_DEBUG "%s: %p, refcount: %d, vma: %08lx-%08lx\n",
+	pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n",
 	       __func__, h, atomic_read(h->refcount), vma->vm_start,
 	       vma->vm_end);
 
@@ -212,7 +212,7 @@ static void vb2_common_vm_close(struct vm_area_struct *vma)
 {
 	struct vb2_vmarea_handler *h = vma->vm_private_data;
 
-	printk(KERN_DEBUG "%s: %p, refcount: %d, vma: %08lx-%08lx\n",
+	pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n",
 	       __func__, h, atomic_read(h->refcount), vma->vm_start,
 	       vma->vm_end);
 
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index d63e9d9..52a0a37 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -36,7 +36,6 @@
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/time.h>
-#include <linux/version.h>
 #include <linux/kmod.h>
 
 #include <linux/i2c.h>
@@ -61,8 +60,7 @@
 // #define VINO_DEBUG
 // #define VINO_DEBUG_INT
 
-#define VINO_MODULE_VERSION "0.0.6"
-#define VINO_VERSION_CODE KERNEL_VERSION(0, 0, 6)
+#define VINO_MODULE_VERSION "0.0.7"
 
 MODULE_DESCRIPTION("SGI VINO Video4Linux2 driver");
 MODULE_VERSION(VINO_MODULE_VERSION);
@@ -2934,7 +2932,6 @@ static int vino_querycap(struct file *file, void *__fh,
 	strcpy(cap->driver, vino_driver_name);
 	strcpy(cap->card, vino_driver_description);
 	strcpy(cap->bus_info, vino_bus_name);
-	cap->version = VINO_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_STREAMING;
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 2238a61..a848bd2 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -22,7 +22,6 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/font.h>
-#include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/videodev2.h>
 #include <linux/kthread.h>
@@ -32,6 +31,7 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
 #include <media/v4l2-common.h>
 
 #define VIVI_MODULE_NAME "vivi"
@@ -44,15 +44,12 @@
 #define MAX_WIDTH 1920
 #define MAX_HEIGHT 1200
 
-#define VIVI_MAJOR_VERSION 0
-#define VIVI_MINOR_VERSION 8
-#define VIVI_RELEASE 0
-#define VIVI_VERSION \
-	KERNEL_VERSION(VIVI_MAJOR_VERSION, VIVI_MINOR_VERSION, VIVI_RELEASE)
+#define VIVI_VERSION "0.8.1"
 
 MODULE_DESCRIPTION("Video Technology Magazine Virtual Video Capture Board");
 MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol");
 MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION(VIVI_VERSION);
 
 static unsigned video_nr = -1;
 module_param(video_nr, uint, 0644);
@@ -167,6 +164,11 @@ struct vivi_dev {
 	struct v4l2_ctrl	   *contrast;
 	struct v4l2_ctrl	   *saturation;
 	struct v4l2_ctrl	   *hue;
+	struct {
+		/* autogain/gain cluster */
+		struct v4l2_ctrl	   *autogain;
+		struct v4l2_ctrl	   *gain;
+	};
 	struct v4l2_ctrl	   *volume;
 	struct v4l2_ctrl	   *button;
 	struct v4l2_ctrl	   *boolean;
@@ -174,6 +176,7 @@ struct vivi_dev {
 	struct v4l2_ctrl	   *int64;
 	struct v4l2_ctrl	   *menu;
 	struct v4l2_ctrl	   *string;
+	struct v4l2_ctrl	   *bitmask;
 
 	spinlock_t                 slock;
 	struct mutex		   mutex;
@@ -457,6 +460,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf)
 	unsigned ms;
 	char str[100];
 	int h, line = 1;
+	s32 gain;
 
 	if (!vbuf)
 		return;
@@ -479,6 +483,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf)
 			dev->width, dev->height, dev->input);
 	gen_text(dev, vbuf, line++ * 16, 16, str);
 
+	gain = v4l2_ctrl_g_ctrl(dev->gain);
 	mutex_lock(&dev->ctrl_handler.lock);
 	snprintf(str, sizeof(str), " brightness %3d, contrast %3d, saturation %3d, hue %d ",
 			dev->brightness->cur.val,
@@ -486,11 +491,13 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf)
 			dev->saturation->cur.val,
 			dev->hue->cur.val);
 	gen_text(dev, vbuf, line++ * 16, 16, str);
-	snprintf(str, sizeof(str), " volume %3d ", dev->volume->cur.val);
+	snprintf(str, sizeof(str), " autogain %d, gain %3d, volume %3d ",
+			dev->autogain->cur.val, gain, dev->volume->cur.val);
 	gen_text(dev, vbuf, line++ * 16, 16, str);
-	snprintf(str, sizeof(str), " int32 %d, int64 %lld ",
+	snprintf(str, sizeof(str), " int32 %d, int64 %lld, bitmask %08x ",
 			dev->int32->cur.val,
-			dev->int64->cur.val64);
+			dev->int64->cur.val64,
+			dev->bitmask->cur.val);
 	gen_text(dev, vbuf, line++ * 16, 16, str);
 	snprintf(str, sizeof(str), " boolean %d, menu %s, string \"%s\" ",
 			dev->boolean->cur.val,
@@ -524,11 +531,13 @@ static void vivi_thread_tick(struct vivi_dev *dev)
 	spin_lock_irqsave(&dev->slock, flags);
 	if (list_empty(&dma_q->active)) {
 		dprintk(dev, 1, "No active queue to serve\n");
-		goto unlock;
+		spin_unlock_irqrestore(&dev->slock, flags);
+		return;
 	}
 
 	buf = list_entry(dma_q->active.next, struct vivi_buffer, list);
 	list_del(&buf->list);
+	spin_unlock_irqrestore(&dev->slock, flags);
 
 	do_gettimeofday(&buf->vb.v4l2_buf.timestamp);
 
@@ -538,8 +547,6 @@ static void vivi_thread_tick(struct vivi_dev *dev)
 
 	vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE);
 	dprintk(dev, 2, "[%p/%d] done\n", buf, buf->vb.v4l2_buf.index);
-unlock:
-	spin_unlock_irqrestore(&dev->slock, flags);
 }
 
 #define frames_to_ms(frames)					\
@@ -812,7 +819,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strcpy(cap->driver, "vivi");
 	strcpy(cap->card, "vivi");
 	strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info));
-	cap->version = VIVI_VERSION;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | \
 			    V4L2_CAP_READWRITE;
 	return 0;
@@ -975,14 +981,37 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
 	if (i >= NUM_INPUTS)
 		return -EINVAL;
 
+	if (i == dev->input)
+		return 0;
+
 	dev->input = i;
 	precalculate_bars(dev);
 	precalculate_line(dev);
 	return 0;
 }
 
+static int vidioc_subscribe_event(struct v4l2_fh *fh,
+				struct v4l2_event_subscription *sub)
+{
+	switch (sub->type) {
+	case V4L2_EVENT_CTRL:
+		return v4l2_event_subscribe(fh, sub, 0);
+	default:
+		return -EINVAL;
+	}
+}
+
 /* --- controls ---------------------------------------------- */
 
+static int vivi_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivi_dev *dev = container_of(ctrl->handler, struct vivi_dev, ctrl_handler);
+
+	if (ctrl == dev->autogain)
+		dev->gain->val = jiffies & 0xff;
+	return 0;
+}
+
 static int vivi_s_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct vivi_dev *dev = container_of(ctrl->handler, struct vivi_dev, ctrl_handler);
@@ -1010,10 +1039,17 @@ static unsigned int
 vivi_poll(struct file *file, struct poll_table_struct *wait)
 {
 	struct vivi_dev *dev = video_drvdata(file);
+	struct v4l2_fh *fh = file->private_data;
 	struct vb2_queue *q = &dev->vb_vidq;
+	unsigned int res;
 
 	dprintk(dev, 1, "%s\n", __func__);
-	return vb2_poll(q, file, wait);
+	res = vb2_poll(q, file, wait);
+	if (v4l2_event_pending(fh))
+		res |= POLLPRI;
+	else
+		poll_wait(file, &fh->wait, wait);
+	return res;
 }
 
 static int vivi_close(struct file *file)
@@ -1045,6 +1081,7 @@ static int vivi_mmap(struct file *file, struct vm_area_struct *vma)
 }
 
 static const struct v4l2_ctrl_ops vivi_ctrl_ops = {
+	.g_volatile_ctrl = vivi_g_volatile_ctrl,
 	.s_ctrl = vivi_s_ctrl,
 };
 
@@ -1117,9 +1154,20 @@ static const struct v4l2_ctrl_config vivi_ctrl_string = {
 	.step = 1,
 };
 
+static const struct v4l2_ctrl_config vivi_ctrl_bitmask = {
+	.ops = &vivi_ctrl_ops,
+	.id = VIVI_CID_CUSTOM_BASE + 6,
+	.name = "Bitmask",
+	.type = V4L2_CTRL_TYPE_BITMASK,
+	.def = 0x80002000,
+	.min = 0,
+	.max = 0x80402010,
+	.step = 0,
+};
+
 static const struct v4l2_file_operations vivi_fops = {
 	.owner		= THIS_MODULE,
-	.open		= v4l2_fh_open,
+	.open           = v4l2_fh_open,
 	.release        = vivi_close,
 	.read           = vivi_read,
 	.poll		= vivi_poll,
@@ -1143,6 +1191,8 @@ static const struct v4l2_ioctl_ops vivi_ioctl_ops = {
 	.vidioc_s_input       = vidioc_s_input,
 	.vidioc_streamon      = vidioc_streamon,
 	.vidioc_streamoff     = vidioc_streamoff,
+	.vidioc_subscribe_event = vidioc_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
 };
 
 static struct video_device vivi_template = {
@@ -1213,16 +1263,22 @@ static int __init vivi_create_instance(int inst)
 			V4L2_CID_SATURATION, 0, 255, 1, 127);
 	dev->hue = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops,
 			V4L2_CID_HUE, -128, 127, 1, 0);
+	dev->autogain = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops,
+			V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+	dev->gain = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops,
+			V4L2_CID_GAIN, 0, 255, 1, 100);
 	dev->button = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_button, NULL);
 	dev->int32 = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int32, NULL);
 	dev->int64 = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int64, NULL);
 	dev->boolean = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_boolean, NULL);
 	dev->menu = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_menu, NULL);
 	dev->string = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_string, NULL);
+	dev->bitmask = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_bitmask, NULL);
 	if (hdl->error) {
 		ret = hdl->error;
 		goto unreg_dev;
 	}
+	v4l2_ctrl_auto_cluster(2, &dev->autogain, 0, true);
 	dev->v4l2_dev.ctrl_handler = hdl;
 
 	/* initialize locks */
@@ -1325,9 +1381,8 @@ static int __init vivi_init(void)
 	}
 
 	printk(KERN_INFO "Video Technology Magazine Virtual Video "
-			"Capture Board ver %u.%u.%u successfully loaded.\n",
-			(VIVI_VERSION >> 16) & 0xFF, (VIVI_VERSION >> 8) & 0xFF,
-			VIVI_VERSION & 0xFF);
+			"Capture Board ver %s successfully loaded.\n",
+			VIVI_VERSION);
 
 	/* n_devs will reflect the actual number of allocated devices */
 	n_devs = i;
diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c
index fa35639..453dbbd 100644
--- a/drivers/media/video/w9966.c
+++ b/drivers/media/video/w9966.c
@@ -57,7 +57,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <linux/slab.h>
 #include <media/v4l2-common.h>
@@ -127,7 +126,7 @@ struct w9966 {
 MODULE_AUTHOR("Jakob Kemi <jakob.kemi@post.utfors.se>");
 MODULE_DESCRIPTION("Winbond w9966cf WebCam driver (0.32)");
 MODULE_LICENSE("GPL");
-
+MODULE_VERSION("0.33.1");
 
 #ifdef MODULE
 static const char *pardev[] = {[0 ... W9966_MAXCAMS] = ""};
@@ -568,7 +567,6 @@ static int cam_querycap(struct file *file, void  *priv,
 	strlcpy(vcap->driver, cam->v4l2_dev.name, sizeof(vcap->driver));
 	strlcpy(vcap->card, W9966_DRIVERNAME, sizeof(vcap->card));
 	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
-	vcap->version = KERNEL_VERSION(0, 33, 0);
 	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index f3f6400..d7166af 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -41,10 +41,6 @@ struct zoran_sync {
 };
 
 
-#define MAJOR_VERSION 0		/* driver major version */
-#define MINOR_VERSION 10	/* driver minor version */
-#define RELEASE_VERSION 0	/* release version */
-
 #define ZORAN_NAME    "ZORAN"	/* name of the device */
 
 #define ZR_DEVNAME(zr) ((zr)->name)
diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c
index 79b04ac..c3602d6 100644
--- a/drivers/media/video/zoran/zoran_card.c
+++ b/drivers/media/video/zoran/zoran_card.c
@@ -123,9 +123,12 @@ int zr36067_debug = 1;
 module_param_named(debug, zr36067_debug, int, 0644);
 MODULE_PARM_DESC(debug, "Debug level (0-5)");
 
+#define ZORAN_VERSION "0.10.1"
+
 MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver");
 MODULE_AUTHOR("Serguei Miridonov");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(ZORAN_VERSION);
 
 #define ZR_DEVICE(subven, subdev, data)	{ \
 	.vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \
@@ -1459,8 +1462,8 @@ static int __init zoran_init(void)
 {
 	int res;
 
-	printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n",
-	       MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION);
+	printk(KERN_INFO "Zoran MJPEG board driver version %s\n",
+	       ZORAN_VERSION);
 
 	/* check the parameters we have been given, adjust if necessary */
 	if (v4l_nbufs < 2)
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 2771d81..d4d05d2 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -44,7 +44,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/delay.h>
@@ -1538,8 +1537,6 @@ static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability
 	strncpy(cap->driver, "zoran", sizeof(cap->driver)-1);
 	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
 		 pci_name(zr->pci_dev));
-	cap->version = KERNEL_VERSION(MAJOR_VERSION, MINOR_VERSION,
-			   RELEASE_VERSION);
 	cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
 			    V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_VIDEO_OVERLAY;
 	return 0;
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index 7dfb01e..c492846 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -29,7 +29,6 @@
 
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/usb.h>
 #include <linux/vmalloc.h>
@@ -42,8 +41,7 @@
 
 
 /* Version Information */
-#define DRIVER_VERSION "v0.73"
-#define ZR364XX_VERSION_CODE KERNEL_VERSION(0, 7, 3)
+#define DRIVER_VERSION "0.7.4"
 #define DRIVER_AUTHOR "Antoine Jacquet, http://royale.zerezo.com/"
 #define DRIVER_DESC "Zoran 364xx"
 
@@ -744,7 +742,6 @@ static int zr364xx_vidioc_querycap(struct file *file, void *priv,
 	strlcpy(cap->card, cam->udev->product, sizeof(cap->card));
 	strlcpy(cap->bus_info, dev_name(&cam->udev->dev),
 		sizeof(cap->bus_info));
-	cap->version = ZR364XX_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
 			    V4L2_CAP_READWRITE |
 			    V4L2_CAP_STREAMING;
@@ -1721,3 +1718,4 @@ module_exit(zr364xx_exit);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 69272e4..696879e 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -287,12 +287,8 @@ static __devinitdata struct i2c_board_info timberdale_saa7706_i2c_board_info = {
 static __devinitdata struct timb_radio_platform_data
 	timberdale_radio_platform_data = {
 	.i2c_adapter = 0,
-	.tuner = {
-		.info = &timberdale_tef6868_i2c_board_info
-	},
-	.dsp = {
-		.info = &timberdale_saa7706_i2c_board_info
-	}
+	.tuner = &timberdale_tef6868_i2c_board_info,
+	.dsp = &timberdale_saa7706_i2c_board_info
 };
 
 static const __devinitconst struct resource timberdale_video_resources[] = {
diff --git a/drivers/staging/cxd2099/Kconfig b/drivers/staging/cxd2099/Kconfig
index 9d638c3..b48aefd 100644
--- a/drivers/staging/cxd2099/Kconfig
+++ b/drivers/staging/cxd2099/Kconfig
@@ -1,9 +1,10 @@
 config DVB_CXD2099
-        tristate "CXD2099AR Common Interface driver"
-        depends on DVB_CORE && PCI && I2C && DVB_NGENE
-        ---help---
-          Support for the CI module found on cineS2 DVB-S2, supported by
-	  the Micronas PCIe device driver (ngene).
+	tristate "CXD2099AR Common Interface driver"
+	depends on DVB_CORE && PCI && I2C
+	---help---
+	  Support for the CI module found on cards based on
+	  - Micronas ngene PCIe bridge: cineS2 etc.
+	  - Digital Devices PCIe bridge: Octopus series
 
 	  For now, data is passed through '/dev/dvb/adapterX/sec0':
 	    - Encrypted data must be written to 'sec0'.
diff --git a/drivers/staging/cxd2099/cxd2099.c b/drivers/staging/cxd2099/cxd2099.c
index 55b1c4a..1c04185 100644
--- a/drivers/staging/cxd2099/cxd2099.c
+++ b/drivers/staging/cxd2099/cxd2099.c
@@ -1,7 +1,7 @@
 /*
  * cxd2099.c: Driver for the CXD2099AR Common Interface Controller
  *
- * Copyright (C) 2010 DigitalDevices UG
+ * Copyright (C) 2010-2011 Digital Devices GmbH
  *
  *
  * This program is free software; you can redistribute it and/or
@@ -41,13 +41,13 @@ struct cxd {
 	struct dvb_ca_en50221 en;
 
 	struct i2c_adapter *i2c;
-	u8     adr;
+	struct cxd2099_cfg cfg;
+
 	u8     regs[0x23];
 	u8     lastaddress;
 	u8     clk_reg_f;
 	u8     clk_reg_b;
 	int    mode;
-	u32    bitrate;
 	int    ready;
 	int    dr;
 	int    slot_stat;
@@ -89,9 +89,9 @@ static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr,
 			u8 reg, u8 *val)
 {
 	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
-				   .buf = &reg, .len = 1 },
+				   .buf = &reg, .len = 1},
 				  {.addr = adr, .flags = I2C_M_RD,
-				   .buf = val, .len = 1 } };
+				   .buf = val, .len = 1} };
 
 	if (i2c_transfer(adapter, msgs, 2) != 2) {
 		printk(KERN_ERR "error in i2c_read_reg\n");
@@ -104,9 +104,9 @@ static int i2c_read(struct i2c_adapter *adapter, u8 adr,
 		    u8 reg, u8 *data, u8 n)
 {
 	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
-				   .buf = &reg, .len = 1 },
-				  {.addr = adr, .flags = I2C_M_RD,
-				   .buf = data, .len = n } };
+				 .buf = &reg, .len = 1},
+				{.addr = adr, .flags = I2C_M_RD,
+				 .buf = data, .len = n} };
 
 	if (i2c_transfer(adapter, msgs, 2) != 2) {
 		printk(KERN_ERR "error in i2c_read\n");
@@ -119,10 +119,10 @@ static int read_block(struct cxd *ci, u8 adr, u8 *data, u8 n)
 {
 	int status;
 
-	status = i2c_write_reg(ci->i2c, ci->adr, 0, adr);
+	status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
 	if (!status) {
 		ci->lastaddress = adr;
-		status = i2c_read(ci->i2c, ci->adr, 1, data, n);
+		status = i2c_read(ci->i2c, ci->cfg.adr, 1, data, n);
 	}
 	return status;
 }
@@ -136,24 +136,24 @@ static int read_reg(struct cxd *ci, u8 reg, u8 *val)
 static int read_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status)
-		status = i2c_read(ci->i2c, ci->adr, 3, data, n);
+		status = i2c_read(ci->i2c, ci->cfg.adr, 3, data, n);
 	return status;
 }
 
 static int write_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status) {
 		u8 buf[256] = {3};
 		memcpy(buf+1, data, n);
-		status = i2c_write(ci->i2c, ci->adr, buf, n+1);
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, n+1);
 	}
 	return status;
 }
@@ -161,39 +161,64 @@ static int write_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
 static int read_io(struct cxd *ci, u16 address, u8 *val)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status)
-		status = i2c_read(ci->i2c, ci->adr, 3, val, 1);
+		status = i2c_read(ci->i2c, ci->cfg.adr, 3, val, 1);
 	return status;
 }
 
 static int write_io(struct cxd *ci, u16 address, u8 val)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
-	u8 buf[2] = { 3, val };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
+	u8 buf[2] = {3, val};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status)
-		status = i2c_write(ci->i2c, ci->adr, buf, 2);
-
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, 2);
 	return status;
 }
 
+#if 0
+static int read_io_data(struct cxd *ci, u8 *data, u8 n)
+{
+	int status;
+	u8 addr[3] = { 2, 0, 0 };
+
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
+	if (!status)
+		status = i2c_read(ci->i2c, ci->cfg.adr, 3, data, n);
+	return 0;
+}
+
+static int write_io_data(struct cxd *ci, u8 *data, u8 n)
+{
+	int status;
+	u8 addr[3] = {2, 0, 0};
+
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
+	if (!status) {
+		u8 buf[256] = {3};
+		memcpy(buf+1, data, n);
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, n + 1);
+	}
+	return 0;
+}
+#endif
 
 static int write_regm(struct cxd *ci, u8 reg, u8 val, u8 mask)
 {
 	int status;
 
-	status = i2c_write_reg(ci->i2c, ci->adr, 0, reg);
+	status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, reg);
 	if (!status && reg >= 6 && reg <= 8 && mask != 0xff)
-		status = i2c_read_reg(ci->i2c, ci->adr, 1, &ci->regs[reg]);
-	ci->regs[reg] = (ci->regs[reg]&(~mask))|val;
+		status = i2c_read_reg(ci->i2c, ci->cfg.adr, 1, &ci->regs[reg]);
+	ci->regs[reg] = (ci->regs[reg] & (~mask)) | val;
 	if (!status) {
 		ci->lastaddress = reg;
-		status = i2c_write_reg(ci->i2c, ci->adr, 1, ci->regs[reg]);
+		status = i2c_write_reg(ci->i2c, ci->cfg.adr, 1, ci->regs[reg]);
 	}
 	if (reg == 0x20)
 		ci->regs[reg] &= 0x7f;
@@ -211,11 +236,11 @@ static int write_block(struct cxd *ci, u8 adr, u8 *data, int n)
 	int status;
 	u8 buf[256] = {1};
 
-	status = i2c_write_reg(ci->i2c, ci->adr, 0, adr);
+	status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
 	if (!status) {
 		ci->lastaddress = adr;
-		memcpy(buf+1, data, n);
-		status = i2c_write(ci->i2c, ci->adr, buf, n+1);
+		memcpy(buf + 1, data, n);
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, n + 1);
 	}
 	return status;
 }
@@ -249,12 +274,16 @@ static void cam_mode(struct cxd *ci, int mode)
 		write_regm(ci, 0x20, 0x80, 0x80);
 		break;
 	case 0x01:
+#ifdef BUFFER_MODE
+		if (!ci->en.read_data)
+			return;
 		printk(KERN_INFO "enable cam buffer mode\n");
 		/* write_reg(ci, 0x0d, 0x00); */
 		/* write_reg(ci, 0x0e, 0x01); */
 		write_regm(ci, 0x08, 0x40, 0x40);
 		/* read_reg(ci, 0x12, &dummy); */
 		write_regm(ci, 0x08, 0x80, 0x80);
+#endif
 		break;
 	default:
 		break;
@@ -264,8 +293,6 @@ static void cam_mode(struct cxd *ci, int mode)
 
 
 
-#define CHK_ERROR(s) if ((status = s)) break
-
 static int init(struct cxd *ci)
 {
 	int status;
@@ -273,63 +300,160 @@ static int init(struct cxd *ci)
 	mutex_lock(&ci->lock);
 	ci->mode = -1;
 	do {
-		CHK_ERROR(write_reg(ci, 0x00, 0x00));
-		CHK_ERROR(write_reg(ci, 0x01, 0x00));
-		CHK_ERROR(write_reg(ci, 0x02, 0x10));
-		CHK_ERROR(write_reg(ci, 0x03, 0x00));
-		CHK_ERROR(write_reg(ci, 0x05, 0xFF));
-		CHK_ERROR(write_reg(ci, 0x06, 0x1F));
-		CHK_ERROR(write_reg(ci, 0x07, 0x1F));
-		CHK_ERROR(write_reg(ci, 0x08, 0x28));
-		CHK_ERROR(write_reg(ci, 0x14, 0x20));
-
-		CHK_ERROR(write_reg(ci, 0x09, 0x4D)); /* Input Mode C, BYPass Serial, TIVAL = low, MSB */
-		CHK_ERROR(write_reg(ci, 0x0A, 0xA7)); /* TOSTRT = 8, Mode B (gated clock), falling Edge, Serial, POL=HIGH, MSB */
-
-		/* Sync detector */
-		CHK_ERROR(write_reg(ci, 0x0B, 0x33));
-		CHK_ERROR(write_reg(ci, 0x0C, 0x33));
-
-		CHK_ERROR(write_regm(ci, 0x14, 0x00, 0x0F));
-		CHK_ERROR(write_reg(ci, 0x15, ci->clk_reg_b));
-		CHK_ERROR(write_regm(ci, 0x16, 0x00, 0x0F));
-		CHK_ERROR(write_reg(ci, 0x17, ci->clk_reg_f));
-
-		CHK_ERROR(write_reg(ci, 0x20, 0x28)); /* Integer Divider, Falling Edge, Internal Sync, */
-		CHK_ERROR(write_reg(ci, 0x21, 0x00)); /* MCLKI = TICLK/8 */
-		CHK_ERROR(write_reg(ci, 0x22, 0x07)); /* MCLKI = TICLK/8 */
-
-
-		CHK_ERROR(write_regm(ci, 0x20, 0x80, 0x80)); /* Reset CAM state machine */
-
-		CHK_ERROR(write_regm(ci, 0x03, 0x02, 02));  /* Enable IREQA Interrupt */
-		CHK_ERROR(write_reg(ci, 0x01, 0x04));  /* Enable CD Interrupt */
-		CHK_ERROR(write_reg(ci, 0x00, 0x31));  /* Enable TS1,Hot Swap,Slot A */
-		CHK_ERROR(write_regm(ci, 0x09, 0x08, 0x08));  /* Put TS in bypass */
+		status = write_reg(ci, 0x00, 0x00);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x01, 0x00);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x02, 0x10);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x03, 0x00);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x05, 0xFF);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x06, 0x1F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x07, 0x1F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x08, 0x28);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x14, 0x20);
+		if (status < 0)
+			break;
+
+#if 0
+		status = write_reg(ci, 0x09, 0x4D); /* Input Mode C, BYPass Serial, TIVAL = low, MSB */
+		if (status < 0)
+			break;
+#endif
+		status = write_reg(ci, 0x0A, 0xA7); /* TOSTRT = 8, Mode B (gated clock), falling Edge, Serial, POL=HIGH, MSB */
+		if (status < 0)
+			break;
+
+		status = write_reg(ci, 0x0B, 0x33);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x0C, 0x33);
+		if (status < 0)
+			break;
+
+		status = write_regm(ci, 0x14, 0x00, 0x0F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x15, ci->clk_reg_b);
+		if (status < 0)
+			break;
+		status = write_regm(ci, 0x16, 0x00, 0x0F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x17, ci->clk_reg_f);
+		if (status < 0)
+			break;
+
+		if (ci->cfg.clock_mode) {
+			if (ci->cfg.polarity) {
+				status = write_reg(ci, 0x09, 0x6f);
+				if (status < 0)
+					break;
+			} else {
+				status = write_reg(ci, 0x09, 0x6d);
+				if (status < 0)
+					break;
+			}
+			status = write_reg(ci, 0x20, 0x68);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x21, 0x00);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x22, 0x02);
+			if (status < 0)
+				break;
+		} else {
+			if (ci->cfg.polarity) {
+				status = write_reg(ci, 0x09, 0x4f);
+				if (status < 0)
+					break;
+			} else {
+				status = write_reg(ci, 0x09, 0x4d);
+				if (status < 0)
+					break;
+			}
+
+			status = write_reg(ci, 0x20, 0x28);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x21, 0x00);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x22, 0x07);
+			if (status < 0)
+				break;
+		}
+
+		status = write_regm(ci, 0x20, 0x80, 0x80);
+		if (status < 0)
+			break;
+		status = write_regm(ci, 0x03, 0x02, 0x02);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x01, 0x04);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x00, 0x31);
+		if (status < 0)
+			break;
+
+		/* Put TS in bypass */
+		status = write_regm(ci, 0x09, 0x08, 0x08);
+		if (status < 0)
+			break;
 		ci->cammode = -1;
-#ifdef BUFFER_MODE
 		cam_mode(ci, 0);
-#endif
 	} while (0);
 	mutex_unlock(&ci->lock);
 
 	return 0;
 }
 
-
 static int read_attribute_mem(struct dvb_ca_en50221 *ca,
 			      int slot, int address)
 {
 	struct cxd *ci = ca->data;
+#if 0
+	if (ci->amem_read) {
+		if (address <= 0 || address > 1024)
+			return -EIO;
+		return ci->amem[address];
+	}
+
+	mutex_lock(&ci->lock);
+	write_regm(ci, 0x06, 0x00, 0x05);
+	read_pccard(ci, 0, &ci->amem[0], 128);
+	read_pccard(ci, 128, &ci->amem[0], 128);
+	read_pccard(ci, 256, &ci->amem[0], 128);
+	read_pccard(ci, 384, &ci->amem[0], 128);
+	write_regm(ci, 0x06, 0x05, 0x05);
+	mutex_unlock(&ci->lock);
+	return ci->amem[address];
+#else
 	u8 val;
 	mutex_lock(&ci->lock);
 	set_mode(ci, 1);
 	read_pccard(ci, address, &val, 1);
 	mutex_unlock(&ci->lock);
+	/* printk(KERN_INFO "%02x:%02x\n", address,val); */
 	return val;
+#endif
 }
 
-
 static int write_attribute_mem(struct dvb_ca_en50221 *ca, int slot,
 			       int address, u8 value)
 {
@@ -372,6 +496,15 @@ static int slot_reset(struct dvb_ca_en50221 *ca, int slot)
 	struct cxd *ci = ca->data;
 
 	mutex_lock(&ci->lock);
+#if 0
+	write_reg(ci, 0x00, 0x21);
+	write_reg(ci, 0x06, 0x1F);
+	write_reg(ci, 0x00, 0x31);
+#else
+#if 0
+	write_reg(ci, 0x06, 0x1F);
+	write_reg(ci, 0x06, 0x2F);
+#else
 	cam_mode(ci, 0);
 	write_reg(ci, 0x00, 0x21);
 	write_reg(ci, 0x06, 0x1F);
@@ -379,13 +512,25 @@ static int slot_reset(struct dvb_ca_en50221 *ca, int slot)
 	write_regm(ci, 0x20, 0x80, 0x80);
 	write_reg(ci, 0x03, 0x02);
 	ci->ready = 0;
+#endif
+#endif
 	ci->mode = -1;
 	{
 		int i;
+#if 0
+		u8 val;
+#endif
 		for (i = 0; i < 100; i++) {
 			msleep(10);
+#if 0
+			read_reg(ci, 0x06, &val);
+			printk(KERN_INFO "%d:%02x\n", i, val);
+			if (!(val&0x10))
+				break;
+#else
 			if (ci->ready)
 				break;
+#endif
 		}
 	}
 	mutex_unlock(&ci->lock);
@@ -399,12 +544,12 @@ static int slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
 
 	printk(KERN_INFO "slot_shutdown\n");
 	mutex_lock(&ci->lock);
-	/* write_regm(ci, 0x09, 0x08, 0x08); */
-	write_regm(ci, 0x20, 0x80, 0x80);
-	write_regm(ci, 0x06, 0x07, 0x07);
+	write_regm(ci, 0x09, 0x08, 0x08);
+	write_regm(ci, 0x20, 0x80, 0x80); /* Reset CAM Mode */
+	write_regm(ci, 0x06, 0x07, 0x07); /* Clear IO Mode */
 	ci->mode = -1;
 	mutex_unlock(&ci->lock);
-	return 0; /* shutdown(ci); */
+	return 0;
 }
 
 static int slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
@@ -459,7 +604,6 @@ static int campoll(struct cxd *ci)
 		if (istat&8 && ci->slot_stat == DVB_CA_EN50221_POLL_CAM_PRESENT) {
 			ci->ready = 1;
 			ci->slot_stat |= DVB_CA_EN50221_POLL_CAM_READY;
-			printk(KERN_INFO "READY\n");
 		}
 	}
 	return 0;
@@ -510,7 +654,7 @@ static int write_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount)
 	struct cxd *ci = ca->data;
 
 	mutex_lock(&ci->lock);
-	printk(KERN_INFO "write_data %d\n", ecount);
+	printk(kern_INFO "write_data %d\n", ecount);
 	write_reg(ci, 0x0d, ecount>>8);
 	write_reg(ci, 0x0e, ecount&0xff);
 	write_block(ci, 0x11, ebuf, ecount);
@@ -535,15 +679,15 @@ static struct dvb_ca_en50221 en_templ = {
 
 };
 
-struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv,
+struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
+				      void *priv,
 				      struct i2c_adapter *i2c)
 {
 	struct cxd *ci = 0;
-	u32 bitrate = 62000000;
 	u8 val;
 
-	if (i2c_read_reg(i2c, adr, 0, &val) < 0) {
-		printk(KERN_ERR "No CXD2099 detected at %02x\n", adr);
+	if (i2c_read_reg(i2c, cfg->adr, 0, &val) < 0) {
+		printk(KERN_INFO "No CXD2099 detected at %02x\n", cfg->adr);
 		return 0;
 	}
 
@@ -553,21 +697,20 @@ struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv,
 	memset(ci, 0, sizeof(*ci));
 
 	mutex_init(&ci->lock);
+	memcpy(&ci->cfg, cfg, sizeof(struct cxd2099_cfg));
 	ci->i2c = i2c;
-	ci->adr = adr;
 	ci->lastaddress = 0xff;
 	ci->clk_reg_b = 0x4a;
 	ci->clk_reg_f = 0x1b;
-	ci->bitrate = bitrate;
 
 	memcpy(&ci->en, &en_templ, sizeof(en_templ));
 	ci->en.data = ci;
 	init(ci);
-	printk(KERN_INFO "Attached CXD2099AR at %02x\n", ci->adr);
+	printk(KERN_INFO "Attached CXD2099AR at %02x\n", ci->cfg.adr);
 	return &ci->en;
 }
 EXPORT_SYMBOL(cxd2099_attach);
 
 MODULE_DESCRIPTION("cxd2099");
-MODULE_AUTHOR("Ralph Metzler <rjkm@metzlerbros.de>");
+MODULE_AUTHOR("Ralph Metzler");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/cxd2099/cxd2099.h b/drivers/staging/cxd2099/cxd2099.h
index bed54ff..19c588a 100644
--- a/drivers/staging/cxd2099/cxd2099.h
+++ b/drivers/staging/cxd2099/cxd2099.h
@@ -1,7 +1,7 @@
 /*
  * cxd2099.h: Driver for the CXD2099AR Common Interface Controller
  *
- * Copyright (C) 2010 DigitalDevices UG
+ * Copyright (C) 2010-2011 Digital Devices GmbH
  *
  *
  * This program is free software; you can redistribute it and/or
@@ -27,11 +27,21 @@
 
 #include <dvb_ca_en50221.h>
 
+struct cxd2099_cfg {
+	u32 bitrate;
+	u8  adr;
+	u8  polarity:1;
+	u8  clock_mode:1;
+};
+
 #if defined(CONFIG_DVB_CXD2099) || \
-        (defined(CONFIG_DVB_CXD2099_MODULE) && defined(MODULE))
-struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv, struct i2c_adapter *i2c);
+	(defined(CONFIG_DVB_CXD2099_MODULE) && defined(MODULE))
+struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
+				      void *priv, struct i2c_adapter *i2c);
 #else
-static inline struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv, struct i2c_adapter *i2c)
+
+static inline struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
+					void *priv, struct i2c_adapter *i2c)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
diff --git a/drivers/staging/tm6000/tm6000-alsa.c b/drivers/staging/tm6000/tm6000-alsa.c
index ddfd7c3..bd5fa89 100644
--- a/drivers/staging/tm6000/tm6000-alsa.c
+++ b/drivers/staging/tm6000/tm6000-alsa.c
@@ -84,7 +84,6 @@ static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip)
 
 	tm6000_set_audio_bitrate(core, 48000);
 
-
 	return 0;
 }
 
@@ -123,6 +122,7 @@ static int dsp_buffer_alloc(struct snd_pcm_substream *substream, int size)
 	if (substream->runtime->dma_area) {
 		if (substream->runtime->dma_bytes > size)
 			return 0;
+
 		dsp_buffer_free(substream);
 	}
 
@@ -152,9 +152,9 @@ static struct snd_pcm_hardware snd_tm6000_digital_hw = {
 		SNDRV_PCM_INFO_MMAP_VALID,
 	.formats = SNDRV_PCM_FMTBIT_S16_LE,
 
-	.rates =		SNDRV_PCM_RATE_CONTINUOUS,
-	.rate_min =		48000,
-	.rate_max =		48000,
+	.rates = SNDRV_PCM_RATE_CONTINUOUS,
+	.rate_min = 48000,
+	.rate_max = 48000,
 	.channels_min = 2,
 	.channels_max = 2,
 	.period_bytes_min = 64,
@@ -254,9 +254,7 @@ static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size)
 		memcpy(runtime->dma_area + buf_pos * stride, buf,
 			length * stride);
 
-#ifndef NO_PCM_LOCK
 	snd_pcm_stream_lock(substream);
-#endif
 
 	chip->buf_pos += length;
 	if (chip->buf_pos >= runtime->buffer_size)
@@ -268,9 +266,7 @@ static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size)
 		period_elapsed = 1;
 	}
 
-#ifndef NO_PCM_LOCK
 	snd_pcm_stream_unlock(substream);
-#endif
 
 	if (period_elapsed)
 		snd_pcm_period_elapsed(substream);
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index 5e807f0..52f8f9e 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -124,24 +124,12 @@ uvc_v4l2_open(struct file *file)
 	struct video_device *vdev = video_devdata(file);
 	struct uvc_device *uvc = video_get_drvdata(vdev);
 	struct uvc_file_handle *handle;
-	int ret;
 
 	handle = kzalloc(sizeof(*handle), GFP_KERNEL);
 	if (handle == NULL)
 		return -ENOMEM;
 
-	ret = v4l2_fh_init(&handle->vfh, vdev);
-	if (ret < 0)
-		goto error;
-
-	ret = v4l2_event_init(&handle->vfh);
-	if (ret < 0)
-		goto error;
-
-	ret = v4l2_event_alloc(&handle->vfh, 8);
-	if (ret < 0)
-		goto error;
-
+	v4l2_fh_init(&handle->vfh, vdev);
 	v4l2_fh_add(&handle->vfh);
 
 	handle->device = &uvc->video;
@@ -149,10 +137,6 @@ uvc_v4l2_open(struct file *file)
 
 	uvc_function_connect(uvc);
 	return 0;
-
-error:
-	v4l2_fh_exit(&handle->vfh);
-	return ret;
 }
 
 static int
@@ -314,7 +298,7 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		if (sub->type < UVC_EVENT_FIRST || sub->type > UVC_EVENT_LAST)
 			return -EINVAL;
 
-		return v4l2_event_subscribe(&handle->vfh, arg);
+		return v4l2_event_subscribe(&handle->vfh, arg, 2);
 	}
 
 	case VIDIOC_UNSUBSCRIBE_EVENT:
@@ -354,7 +338,7 @@ uvc_v4l2_poll(struct file *file, poll_table *wait)
 	struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
 	unsigned int mask = 0;
 
-	poll_wait(file, &handle->vfh.events->wait, wait);
+	poll_wait(file, &handle->vfh.wait, wait);
 	if (v4l2_event_pending(&handle->vfh))
 		mask |= POLLPRI;