[media] move ati_remote driver from input/misc to media/rc

The driver will be migrated to the RC driver API in a following
commit.

[mchehab@redhat.com: Fix some bad whitespacing]
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

5 files changed, 22 insertions, 22 deletions

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index c9104bb..05cbdab 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -183,22 +183,6 @@ config INPUT_ATLAS_BTNS
 	  To compile this driver as a module, choose M here: the module will
 	  be called atlas_btns.
 
-config INPUT_ATI_REMOTE
-	tristate "ATI / X10 USB RF remote control"
-	depends on USB_ARCH_HAS_HCD
-	select USB
-	help
-	  Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
-	  These are RF remotes with USB receivers.
-	  The ATI remote comes with many of ATI's All-In-Wonder video cards.
-	  The X10 "Lola" remote is available at:
-	     <http://www.x10.com/products/lola_sg1.htm>
-	  This driver provides mouse pointer, left and right mouse buttons,
-	  and maps all the other remote buttons to keypress events.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called ati_remote.
-
 config INPUT_ATI_REMOTE2
 	tristate "ATI / Philips USB RF remote control"
 	depends on USB_ARCH_HAS_HCD
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 299ad5e..9032d34 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_INPUT_ADXL34X)		+= adxl34x.o
 obj-$(CONFIG_INPUT_ADXL34X_I2C)		+= adxl34x-i2c.o
 obj-$(CONFIG_INPUT_ADXL34X_SPI)		+= adxl34x-spi.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
-obj-$(CONFIG_INPUT_ATI_REMOTE)		+= ati_remote.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
 obj-$(CONFIG_INPUT_BFIN_ROTARY)		+= bfin_rotary.o
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 899f783..756884e 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -4,8 +4,8 @@ menuconfig RC_CORE
 	default INPUT
 	---help---
 	  Enable support for Remote Controllers on Linux. This is
-	  needed in order to support several video capture adapters.
-	  Currently, all supported devices use InfraRed.
+	  needed in order to support several video capture adapters,
+	  standalone IR receivers/transmitters, and RF receivers.
 
 	  Enable this option if you have a video capture board even
 	  if you don't need IR, as otherwise, you may not be able to
@@ -108,6 +108,22 @@ config IR_LIRC_CODEC
 	   Enable this option to pass raw IR to and from userspace via
 	   the LIRC interface.
 
+config RC_ATI_REMOTE
+	tristate "ATI / X10 USB RF remote control"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	   Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
+	   These are RF remotes with USB receivers.
+	   The ATI remote comes with many of ATI's All-In-Wonder video cards.
+	   The X10 "Lola" remote is available at:
+	      <http://www.x10.com/products/lola_sg1.htm>
+	   This driver provides mouse pointer, left and right mouse buttons,
+	   and maps all the other remote buttons to keypress events.
+
+	   To compile this driver as a module, choose M here: the module will be
+	   called ati_remote.
+
 config IR_ENE
 	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
 	depends on PNP
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index f224db0..2156e78 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o
 obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 
 # stand-alone IR receivers/transmitters
+obj-$(CONFIG_RC_ATI_REMOTE) += ati_remote.o
 obj-$(CONFIG_IR_IMON) += imon.o
 obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
 obj-$(CONFIG_IR_MCEUSB) += mceusb.o
diff --git a/drivers/input/misc/ati_remote.c b/drivers/media/rc/ati_remote.c
index bce5712..53388a5 100644
--- a/drivers/input/misc/ati_remote.c
+++ b/drivers/media/rc/ati_remote.c
@@ -105,7 +105,7 @@
 #define NVIDIA_REMOTE_PRODUCT_ID	0x0005
 #define MEDION_REMOTE_PRODUCT_ID	0x0006
 
-#define DRIVER_VERSION	        "2.2.1"
+#define DRIVER_VERSION		"2.2.1"
 #define DRIVER_AUTHOR           "Torrey Hoffman <thoffman@arnor.net>"
 #define DRIVER_DESC             "ATI/X10 RF USB Remote Control"
 
@@ -481,7 +481,7 @@ static void ati_remote_input_report(struct urb *urb)
 	/* Mask unwanted remote channels.  */
 	/* note: remote_num is 0-based, channel 1 on remote == 0 here */
 	remote_num = (data[3] >> 4) & 0x0f;
-        if (channel_mask & (1 << (remote_num + 1))) {
+	if (channel_mask & (1 << (remote_num + 1))) {
 		dbginfo(&ati_remote->interface->dev,
 			"Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
 			remote_num, data[1], data[2], channel_mask);
@@ -630,7 +630,7 @@ static int ati_remote_alloc_buffers(struct usb_device *udev,
 		return -1;
 
 	ati_remote->outbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
-					        &ati_remote->outbuf_dma);
+						&ati_remote->outbuf_dma);
 	if (!ati_remote->outbuf)
 		return -1;