/spare/repo/netdev-2.6 branch 'ieee80211'

71 files changed, 223 insertions, 168 deletions

diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 7289da3..0d11d6e 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -71,7 +71,7 @@ EXPORT_SYMBOL(acpi_in_debugger);
 extern char line_buf[80];
 #endif /*ENABLE_DEBUGGER*/
 
-int acpi_specific_hotkey_enabled;
+int acpi_specific_hotkey_enabled = TRUE;
 EXPORT_SYMBOL(acpi_specific_hotkey_enabled);
 
 static unsigned int acpi_irq_irq;
@@ -1162,11 +1162,11 @@ __setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup);
 int __init
 acpi_hotkey_setup(char *str)
 {
-	acpi_specific_hotkey_enabled = TRUE;
+	acpi_specific_hotkey_enabled = FALSE;
 	return 1;
 }
 
-__setup("acpi_specific_hotkey", acpi_hotkey_setup);
+__setup("acpi_generic_hotkey", acpi_hotkey_setup);
 
 /*
  * max_cstate is defined in the base kernel so modules can
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 96fe2f9..ab53832 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -180,7 +180,9 @@ static ssize_t driver_bind(struct device_driver *drv,
 		up(&dev->sem);
 		put_device(dev);
 	}
-	return err;
+	if (err)
+		return err;
+	return count;
 }
 static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind);
 
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 479c125..0154a16 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -299,6 +299,11 @@ static void class_dev_release(struct kobject * kobj)
 
 	pr_debug("device class '%s': release.\n", cd->class_id);
 
+	if (cd->devt_attr) {
+		kfree(cd->devt_attr);
+		cd->devt_attr = NULL;
+	}
+
 	if (cls->release)
 		cls->release(cd);
 	else {
@@ -591,11 +596,8 @@ void class_device_del(struct class_device *class_dev)
 
 	if (class_dev->dev)
 		sysfs_remove_link(&class_dev->kobj, "device");
-	if (class_dev->devt_attr) {
+	if (class_dev->devt_attr)
 		class_device_remove_file(class_dev, class_dev->devt_attr);
-		kfree(class_dev->devt_attr);
-		class_dev->devt_attr = NULL;
-	}
 	class_device_remove_attrs(class_dev);
 
 	kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 4f27e55..7333b41 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -80,7 +80,7 @@ config SERIAL_NONSTANDARD
 
 config COMPUTONE
 	tristate "Computone IntelliPort Plus serial support"
-	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (BROKEN || !SPARC32)
 	---help---
 	  This driver supports the entire family of Intelliport II/Plus
 	  controllers with the exception of the MicroChannel controllers and
@@ -138,7 +138,7 @@ config CYZ_INTR
 
 config DIGIEPCA
 	tristate "Digiboard Intelligent Async Support"
-	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (!64BIT || BROKEN)
 	---help---
 	  This is a driver for Digi International's Xx, Xeve, and Xem series
 	  of cards which provide multiple serial ports. You would need
@@ -208,7 +208,7 @@ config SYNCLINK
 
 config SYNCLINKMP
 	tristate "SyncLink Multiport support"
-	depends on SERIAL_NONSTANDARD
+	depends on SERIAL_NONSTANDARD && (BROKEN || !SPARC32)
 	help
 	  Enable support for the SyncLink Multiport (2 or 4 ports)
 	  serial adapter, running asynchronous and HDLC communications up
@@ -735,7 +735,7 @@ config SGI_IP27_RTC
 
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
-	depends on RTC!=y && !IA64 && !ARM && !PPC64
+	depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 5f33df4..1cadd2c 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -764,6 +764,7 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
 config BLK_DEV_IDEDMA_PMAC
 	bool "PowerMac IDE DMA support"
 	depends on BLK_DEV_IDE_PMAC
+	select BLK_DEV_IDEDMA_PCI
 	help
 	  This option allows the driver for the built-in IDE controller on
 	  Power Macintoshes and PowerBooks to use DMA (direct memory access)
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 9eab642..29c22fc2 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -317,7 +317,7 @@ typedef struct ide_floppy_obj {
 	unsigned long flags;
 } idefloppy_floppy_t;
 
-#define IDEFLOPPY_TICKS_DELAY	3	/* default delay for ZIP 100 */
+#define IDEFLOPPY_TICKS_DELAY	HZ/20	/* default delay for ZIP 100 (50ms) */
 
 /*
  *	Floppy flag bits values.
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index da46577..6e3ab0c 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -173,6 +173,12 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = {
 		.channels	= 2,
 		.autodma	= NOAUTODMA,
 		.bootable	= ON_BOARD,
+	},{	/* 14 */
+		.name		= "Revolution",
+		.init_hwif	= init_hwif_generic,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.bootable	= OFF_BOARD,
 	}
 };
 
@@ -231,6 +237,7 @@ static struct pci_device_id generic_pci_tbl[] = {
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11},
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
+	{ PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION,          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
 	/* Must come last. If you add entries adjust this table appropriately and the init_one code */
 	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
 	{ 0, },
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index c6f5fa4..ff2e217 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -21,6 +21,9 @@
  *
  *   CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
  *
+ *   HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE
+ *   controller same as the CSB6. Single channel ATA100 only.
+ *
  * Documentation:
  *	Available under NDA only. Errata info very hard to get.
  *
@@ -71,6 +74,8 @@ static u8 svwks_ratemask (ide_drive_t *drive)
 	if (!svwks_revision)
 		pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
 
+	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
+		return 2;
 	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
 		u32 reg = 0;
 		if (isa_dev)
@@ -109,6 +114,7 @@ static u8 svwks_csb_check (struct pci_dev *dev)
 		case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
 		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
 		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
+		case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
 			return 1;
 		default:
 			break;
@@ -438,6 +444,13 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
 			btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
 		pci_write_config_byte(dev, 0x5A, btr);
 	}
+	/* Setup HT1000 SouthBridge Controller - Single Channel Only */
+	else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
+		pci_read_config_byte(dev, 0x5A, &btr);
+		btr &= ~0x40;
+		btr |= 0x3;
+		pci_write_config_byte(dev, 0x5A, btr);
+	}
 
 	return (dev->irq) ? dev->irq : 0;
 }
@@ -629,6 +642,15 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
 		.channels	= 1,	/* 2 */
 		.autodma	= AUTODMA,
 		.bootable	= ON_BOARD,
+	},{	/* 4 */
+		.name		= "SvrWks HT1000",
+		.init_setup	= init_setup_svwks,
+		.init_chipset	= init_chipset_svwks,
+		.init_hwif	= init_hwif_svwks,
+		.init_dma	= init_dma_svwks,
+		.channels	= 1,	/* 2 */
+		.autodma	= AUTODMA,
+		.bootable	= ON_BOARD,
 	}
 };
 
@@ -653,6 +675,7 @@ static struct pci_device_id svwks_pci_tbl[] = {
 	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
 	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
 	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index be0fcc8..ea65b07 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1664,7 +1664,7 @@ static struct macio_driver pmac_ide_macio_driver =
 };
 
 static struct pci_device_id pmac_ide_pci_match[] = {
-	{ PCI_VENDOR_ID_APPLE, PCI_DEVIEC_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA,
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 77da827..18ed776 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -229,6 +229,7 @@ second_chance_to_dma:
 			case PCI_DEVICE_ID_AMD_VIPER_7409:
 			case PCI_DEVICE_ID_CMD_643:
 			case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
+			case PCI_DEVICE_ID_REVOLUTION:
 				simplex_stat = hwif->INB(dma_base + 2);
 				hwif->OUTB((simplex_stat&0x60),(dma_base + 2));
 				simplex_stat = hwif->INB(dma_base + 2);
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 79c8e2d..32cdfb3 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -1,6 +1,7 @@
 menu "InfiniBand support"
 
 config INFINIBAND
+	depends on PCI || BROKEN
 	tristate "InfiniBand support"
 	---help---
 	  Core support for InfiniBand (IB).  Make sure to also select
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 6c7b8bf..801c98f 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -134,6 +134,7 @@ config HISAX_AVM_A1
 
 config HISAX_FRITZPCI
 	bool "AVM PnP/PCI (Fritz!PnP/PCI)"
+	depends on BROKEN || !PPC64
 	help
 	  This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
 	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 65ab64c..bc3e096 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -103,7 +103,7 @@ config PMAC_MEDIABAY
 # on non-powerbook machines (but only on PMU based ones AFAIK)
 config PMAC_BACKLIGHT
 	bool "Backlight control for LCD screens"
-	depends on ADB_PMU
+	depends on ADB_PMU && (BROKEN || !PPC64)
 	help
 	  Say Y here to build in code to manage the LCD backlight on a
 	  Macintosh PowerBook.  With this code, the backlight will be turned
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 480f658..486ee50 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -256,8 +256,7 @@ static inline void mddev_unlock(mddev_t * mddev)
 {
 	up(&mddev->reconfig_sem);
 
-	if (mddev->thread)
-		md_wakeup_thread(mddev->thread);
+	md_wakeup_thread(mddev->thread);
 }
 
 mdk_rdev_t * find_rdev_nr(mddev_t *mddev, int nr)
@@ -623,6 +622,7 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 		mddev->raid_disks = sb->raid_disks;
 		mddev->size = sb->size;
 		mddev->events = md_event(sb);
+		mddev->bitmap_offset = 0;
 
 		if (sb->state & (1<<MD_SB_CLEAN))
 			mddev->recovery_cp = MaxSector;
@@ -938,6 +938,7 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 		mddev->raid_disks = le32_to_cpu(sb->raid_disks);
 		mddev->size = le64_to_cpu(sb->size)/2;
 		mddev->events = le64_to_cpu(sb->events);
+		mddev->bitmap_offset = 0;
 		
 		mddev->recovery_cp = le64_to_cpu(sb->resync_offset);
 		memcpy(mddev->uuid, sb->set_uuid, 16);
@@ -1712,6 +1713,7 @@ static int do_md_run(mddev_t * mddev)
 	mddev->in_sync = 1;
 	
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+	md_wakeup_thread(mddev->thread);
 	
 	if (mddev->sb_dirty)
 		md_update_sb(mddev);
@@ -1824,6 +1826,7 @@ static int do_md_stop(mddev_t * mddev, int ro)
 		fput(mddev->bitmap_file);
 		mddev->bitmap_file = NULL;
 	}
+	mddev->bitmap_offset = 0;
 
 	/*
 	 * Free resources if final stop
@@ -2233,8 +2236,7 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info)
 			export_rdev(rdev);
 
 		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
-		if (mddev->thread)
-			md_wakeup_thread(mddev->thread);
+		md_wakeup_thread(mddev->thread);
 		return err;
 	}
 
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ac81e5e..3f57423 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -356,7 +356,7 @@ config VIDEO_M32R_AR
 
 config VIDEO_M32R_AR_M64278
 	tristate "Use Colour AR module M64278(VGA)"
-	depends on VIDEO_M32R_AR
+	depends on VIDEO_M32R_AR && PLAT_M32700UT
 	---help---
 	  Say Y here to use the Renesas M64278E-800 camera module,
 	  which supports VGA(640x480 pixcels) size of images.
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 7b293f0..34b80de 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1897,6 +1897,7 @@ static int cp_resume (struct pci_dev *pdev)
 {
 	struct net_device *dev;
 	struct cp_private *cp;
+	unsigned long flags;
 
 	dev = pci_get_drvdata (pdev);
 	cp  = netdev_priv(dev);
@@ -1910,6 +1911,12 @@ static int cp_resume (struct pci_dev *pdev)
 	
 	cp_init_hw (cp);
 	netif_start_queue (dev);
+
+	spin_lock_irqsave (&cp->lock, flags);
+
+	mii_check_media(&cp->mii_if, netif_msg_link(cp), FALSE);
+
+	spin_unlock_irqrestore (&cp->lock, flags);
 	
 	return 0;
 }
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8a835eb..8edb693 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1145,7 +1145,7 @@ config IBMVETH
 	  be called ibmveth.
 
 config IBM_EMAC
-	tristate "IBM PPC4xx EMAC driver support"
+	bool "IBM PPC4xx EMAC driver support"
 	depends on 4xx
 	select CRC32
 	---help---
@@ -1154,7 +1154,7 @@ config IBM_EMAC
 
 config IBM_EMAC_ERRMSG
 	bool "Verbose error messages"
-	depends on IBM_EMAC
+	depends on IBM_EMAC && BROKEN
 
 config IBM_EMAC_RXB
 	int "Number of receive buffers"
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 5fddc0f..6440a89 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -48,6 +48,10 @@
  *                        net_device_stats
  *                      * introduced tx_timeout function
  *                      * reworked locking
+ *
+ *	  01-Jul-2005   Ben Dooks <ben@simtec.co.uk>
+ *			* fixed spinlock call without pointer
+ *			* ensure spinlock is initialised
  */
 
 #include <linux/module.h>
@@ -148,7 +152,6 @@ static int dm9000_probe(struct device *);
 static int dm9000_open(struct net_device *);
 static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
 static int dm9000_stop(struct net_device *);
-static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int);
 
 
 static void dm9000_timer(unsigned long);
@@ -322,7 +325,7 @@ static void dm9000_timeout(struct net_device *dev)
 
 	/* Save previous register address */
 	reg_save = readb(db->io_addr);
-	spin_lock_irqsave(db->lock,flags);
+	spin_lock_irqsave(&db->lock,flags);
 
 	netif_stop_queue(dev);
 	dm9000_reset(db);
@@ -333,7 +336,7 @@ static void dm9000_timeout(struct net_device *dev)
 
 	/* Restore previous register address */
 	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(db->lock,flags);
+	spin_unlock_irqrestore(&db->lock,flags);
 }
 
 
@@ -387,8 +390,6 @@ dm9000_probe(struct device *dev)
 	int i;
 	u32 id_val;
 
-	printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
-
 	/* Init network device */
 	ndev = alloc_etherdev(sizeof (struct board_info));
 	if (!ndev) {
@@ -405,6 +406,8 @@ dm9000_probe(struct device *dev)
 	db = (struct board_info *) ndev->priv;
 	memset(db, 0, sizeof (*db));
 
+	spin_lock_init(&db->lock);
+
 	if (pdev->num_resources < 2) {
 		ret = -ENODEV;
 		goto out;
@@ -541,7 +544,6 @@ dm9000_probe(struct device *dev)
 	ndev->stop		 = &dm9000_stop;
 	ndev->get_stats		 = &dm9000_get_stats;
 	ndev->set_multicast_list = &dm9000_hash_table;
-	ndev->do_ioctl		 = &dm9000_do_ioctl;
 
 #ifdef DM9000_PROGRAM_EEPROM
 	program_eeprom(db);
@@ -612,7 +614,7 @@ dm9000_open(struct net_device *dev)
 
 	/* set and active a timer process */
 	init_timer(&db->timer);
-	db->timer.expires  = DM9000_TIMER_WUT * 2;
+	db->timer.expires  = DM9000_TIMER_WUT;
 	db->timer.data     = (unsigned long) dev;
 	db->timer.function = &dm9000_timer;
 	add_timer(&db->timer);
@@ -845,15 +847,6 @@ dm9000_get_stats(struct net_device *dev)
 	return &db->stats;
 }
 
-/*
- *  Process the upper socket ioctl command
- */
-static int
-dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	PRINTK1("entering %s\n",__FUNCTION__);
-	return 0;
-}
 
 /*
  *  A periodic timer routine
@@ -864,21 +857,11 @@ dm9000_timer(unsigned long data)
 {
 	struct net_device *dev = (struct net_device *) data;
 	board_info_t *db = (board_info_t *) dev->priv;
-	u8 reg_save;
-	unsigned long flags;
 
 	PRINTK3("dm9000_timer()\n");
 
-	spin_lock_irqsave(db->lock,flags);
-	/* Save previous register address */
-	reg_save = readb(db->io_addr);
-
 	mii_check_media(&db->mii, netif_msg_link(db), 0);
 
-	/* Restore previous register address */
-	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(db->lock,flags);
-
 	/* Set timer again */
 	db->timer.expires = DM9000_TIMER_WUT;
 	add_timer(&db->timer);
@@ -1098,9 +1081,14 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
 {
 	board_info_t *db = (board_info_t *) dev->priv;
 	unsigned long flags;
+	unsigned int reg_save;
 	int ret;
 
 	spin_lock_irqsave(&db->lock,flags);
+
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+
 	/* Fill the phyxcer register into REG_0C */
 	iow(db, DM9000_EPAR, DM9000_PHY | reg);
 
@@ -1111,6 +1099,9 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
 	/* The read data keeps on REG_0D & REG_0E */
 	ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
 
+	/* restore the previous address */
+	writeb(reg_save, db->io_addr);
+
 	spin_unlock_irqrestore(&db->lock,flags);
 
 	return ret;
@@ -1124,9 +1115,13 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
 {
 	board_info_t *db = (board_info_t *) dev->priv;
 	unsigned long flags;
+	unsigned long reg_save;
 
 	spin_lock_irqsave(&db->lock,flags);
 
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+
 	/* Fill the phyxcer register into REG_0C */
 	iow(db, DM9000_EPAR, DM9000_PHY | reg);
 
@@ -1138,6 +1133,9 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
 	udelay(500);		/* Wait write complete */
 	iow(db, DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
 
+	/* restore the previous address */
+	writeb(reg_save, db->io_addr);
+
 	spin_unlock_irqrestore(&db->lock,flags);
 }
 
@@ -1202,6 +1200,8 @@ static struct device_driver dm9000_driver = {
 static int __init
 dm9000_init(void)
 {
+	printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
+
 	return driver_register(&dm9000_driver);	/* search board and register */
 }
 
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index 6482d99..c7fb367 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1712,11 +1712,10 @@ struct mal_commac_ops emac_commac_ops = {
 };
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
-static int emac_netpoll(struct net_device *ndev)
+static void emac_netpoll(struct net_device *ndev)
 {
 	emac_rxeob_dev((void *)ndev, 0);
 	emac_txeob_dev((void *)ndev, 0);
-	return 0;
 }
 #endif
 
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index d520b59..49e5467 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -499,7 +499,7 @@ static int ioc3_mdio_read(struct net_device *dev, int phy, int reg)
 	ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG);
 	while (ioc3_r_micr() & MICR_BUSY);
 
-	return ioc3_r_micr() & MIDR_DATA_MASK;
+	return ioc3_r_midr_r() & MIDR_DATA_MASK;
 }
 
 static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data)
@@ -1291,7 +1291,6 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->features		= NETIF_F_IP_CSUM;
 #endif
 
-	ioc3_setup_duplex(ip);
 	sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
 	sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2);
 
@@ -1300,6 +1299,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_stop;
 
 	mii_check_media(&ip->mii, 1, 1);
+	ioc3_setup_duplex(ip);
 
 	vendor = (sw_physid1 << 12) | (sw_physid2 >> 4);
 	model  = (sw_physid2 >> 4) & 0x3f;
@@ -1524,7 +1524,7 @@ static void ioc3_get_drvinfo (struct net_device *dev,
 	struct ethtool_drvinfo *info)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
-                                                                                
+
         strcpy (info->driver, IOC3_NAME);
         strcpy (info->version, IOC3_VERSION);
         strcpy (info->bus_info, pci_name(ip->pdev));
@@ -1550,7 +1550,7 @@ static int ioc3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	spin_lock_irq(&ip->ioc3_lock);
 	rc = mii_ethtool_sset(&ip->mii, cmd);
 	spin_unlock_irq(&ip->ioc3_lock);
-                                                                        
+
 	return rc;
 }
 
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index b33111e..1f61f0c 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -214,7 +214,7 @@ struct net_device loopback_dev = {
 	.ethtool_ops		= &loopback_ethtool_ops,
 };
 
-/* Setup and register the of the LOOPBACK device. */
+/* Setup and register the loopback device. */
 int __init loopback_init(void)
 {
 	struct net_device_stats *stats;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 368b8fb..01419af 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -66,8 +66,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.35"
-#define DRV_MODULE_RELDATE	"August 6, 2005"
+#define DRV_MODULE_VERSION	"3.36"
+#define DRV_MODULE_RELDATE	"August 19, 2005"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -8970,6 +8970,8 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 		tp->phy_id = hw_phy_id;
 		if (hw_phy_id_masked == PHY_ID_BCM8002)
 			tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
+		else
+			tp->tg3_flags2 &= ~TG3_FLG2_PHY_SERDES;
 	} else {
 		if (tp->phy_id != PHY_ID_INVALID) {
 			/* Do nothing, phy ID already set up in
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index 23d0fa4..7e99e9f 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -84,7 +84,7 @@ config 3C359
 
 config TMS380TR
 	tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
-	depends on TR && (PCI || ISA)
+	depends on TR && (PCI || ISA && ISA_DMA_API)
 	select FW_LOADER
 	---help---
 	  This driver provides generic support for token ring adapters
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index ff5b1b1..5d814df 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -374,7 +374,7 @@ config PCMCIA_HERMES
 
 config AIRO_CS
 	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
-	depends on NET_RADIO && PCMCIA
+	depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
 	---help---
 	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
 	  802.11 wireless cards.  This driver is the same as the Aironet
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 16a2e6a..725a141 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -34,7 +34,7 @@ config PARPORT
 
 config PARPORT_PC
 	tristate "PC-style hardware"
-	depends on PARPORT && (!SPARC64 || PCI) && !SPARC32
+	depends on PARPORT && (!SPARC64 || PCI) && !SPARC32 && !M32R
 	---help---
 	  You should say Y here if you have a PC-style parallel port. All
 	  IBM PC compatible computers and some Alphas have PC-style
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 46b294a..2b92b9e 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 #ifndef _PCIEHP_H
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index df4915d..cafc7ea 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 0dbcf04..0e09476 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 1cda30b..7a0e27f 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 723b12c..33b539b 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/pciehprm.h b/drivers/pci/hotplug/pciehprm.h
index 966775f..05f20fb 100644
--- a/drivers/pci/hotplug/pciehprm.h
+++ b/drivers/pci/hotplug/pciehprm.h
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/pciehprm_acpi.c b/drivers/pci/hotplug/pciehprm_acpi.c
index 57f4e6d..305b47e 100644
--- a/drivers/pci/hotplug/pciehprm_acpi.c
+++ b/drivers/pci/hotplug/pciehprm_acpi.c
@@ -20,7 +20,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <dely.l.sy@intel.com>
+ * Send feedback to <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/pciehprm_nonacpi.c b/drivers/pci/hotplug/pciehprm_nonacpi.c
index 79a0aa6..3622965 100644
--- a/drivers/pci/hotplug/pciehprm_nonacpi.c
+++ b/drivers/pci/hotplug/pciehprm_nonacpi.c
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/pciehprm_nonacpi.h b/drivers/pci/hotplug/pciehprm_nonacpi.h
index 87c90e8..b10603b 100644
--- a/drivers/pci/hotplug/pciehprm_nonacpi.h
+++ b/drivers/pci/hotplug/pciehprm_nonacpi.h
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 67b6a33..fe4d653 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
  *
  */
 #ifndef _SHPCHP_H
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index a70a5c57..6f7d8a2 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 490a955..783b5ab 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 38c5d90..8d98410 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index 90113e9..d867099 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/shpchprm.h b/drivers/pci/hotplug/shpchprm.h
index 88aeb97..057b192 100644
--- a/drivers/pci/hotplug/shpchprm.h
+++ b/drivers/pci/hotplug/shpchprm.h
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c
index 7957cdc..d37b316 100644
--- a/drivers/pci/hotplug/shpchprm_acpi.c
+++ b/drivers/pci/hotplug/shpchprm_acpi.c
@@ -20,7 +20,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <dely.l.sy@intel.com>
+ * Send feedback to <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/shpchprm_legacy.c b/drivers/pci/hotplug/shpchprm_legacy.c
index 37fa77a..ba6c549 100644
--- a/drivers/pci/hotplug/shpchprm_legacy.c
+++ b/drivers/pci/hotplug/shpchprm_legacy.c
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/shpchprm_legacy.h b/drivers/pci/hotplug/shpchprm_legacy.h
index 29ccea5..21bda74 100644
--- a/drivers/pci/hotplug/shpchprm_legacy.h
+++ b/drivers/pci/hotplug/shpchprm_legacy.h
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.c b/drivers/pci/hotplug/shpchprm_nonacpi.c
index 88f4d9f..5f75ef7 100644
--- a/drivers/pci/hotplug/shpchprm_nonacpi.c
+++ b/drivers/pci/hotplug/shpchprm_nonacpi.c
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.h b/drivers/pci/hotplug/shpchprm_nonacpi.h
index 6bc8668..cddaaa5 100644
--- a/drivers/pci/hotplug/shpchprm_nonacpi.h
+++ b/drivers/pci/hotplug/shpchprm_nonacpi.h
@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index b5ab9aa6..2b85aa3 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -453,7 +453,7 @@ static void enable_msi_mode(struct pci_dev *dev, int pos, int type)
 	}
 }
 
-static void disable_msi_mode(struct pci_dev *dev, int pos, int type)
+void disable_msi_mode(struct pci_dev *dev, int pos, int type)
 {
 	u16 control;
 
@@ -699,6 +699,9 @@ int pci_enable_msi(struct pci_dev* dev)
 	if (!pci_msi_enable || !dev)
  		return status;
 
+	if (dev->no_msi)
+		return status;
+
 	temp = dev->irq;
 
 	if ((status = msi_init()) < 0)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index d94d7af..d00168b 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -47,6 +47,12 @@ extern int pci_msi_quirk;
 #define pci_msi_quirk 0
 #endif
 
+#ifdef CONFIG_PCI_MSI
+void disable_msi_mode(struct pci_dev *dev, int pos, int type);
+#else
+static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { }
+#endif
+
 extern int pcie_mch_quirk;
 extern struct device_attribute pci_dev_attrs[];
 extern struct class_device_attribute class_device_attr_cpuaffinity;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a9160ad..bb36bb6 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1291,6 +1291,27 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7520_MCH,	quir
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7320_MCH,	quirk_pcie_mch );
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7525_MCH,	quirk_pcie_mch );
 
+
+/*
+ * It's possible for the MSI to get corrupted if shpc and acpi
+ * are used together on certain PXH-based systems.
+ */
+static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
+{
+	disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
+					PCI_CAP_ID_MSI);
+	dev->no_msi = 1;
+
+	printk(KERN_WARNING "PCI: PXH quirk detected, "
+		"disabling MSI for SHPC device\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXHD_0,	quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXHD_1,	quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXH_0,	quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXH_1,	quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXHV,	quirk_pcie_pxh);
+
+
 static void __devinit quirk_netmos(struct pci_dev *dev)
 {
 	unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 6f9fdb2..599b116 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -41,6 +41,7 @@ module_param(io_speed, int, 0444);
 
 
 #ifdef CONFIG_PCMCIA_PROBE
+#include <asm/irq.h>
 /* mask of IRQs already reserved by other cards, we should avoid using them */
 static u8 pcmcia_used_irq[NR_IRQS];
 #endif
diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c
index add12f7..6e5229e9 100644
--- a/drivers/pnp/card.c
+++ b/drivers/pnp/card.c
@@ -312,6 +312,8 @@ found:
 	if (drv->link.driver.probe) {
 		if (drv->link.driver.probe(&dev->dev)) {
 			dev->dev.driver = NULL;
+			dev->card_link = NULL;
+			up_write(&dev->dev.bus->subsys.rwsem);
 			return NULL;
 		}
 	}
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index d36258d..533f90c 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -230,7 +230,7 @@ qdio_siga_input(struct qdio_q *q)
 }
 
 /* locked by the locks in qdio_activate and qdio_cleanup */
-static __u32 * volatile 
+static __u32 volatile *
 qdio_get_indicator(void)
 {
 	int i;
diff --git a/drivers/s390/crypto/z90crypt.h b/drivers/s390/crypto/z90crypt.h
index 82a1d97..0a3bb5a 100644
--- a/drivers/s390/crypto/z90crypt.h
+++ b/drivers/s390/crypto/z90crypt.h
@@ -36,15 +36,6 @@
 #define z90crypt_VARIANT 2	// 2 = added PCIXCC MCL3 and CEX2C support
 
 /**
- * If we are not using the sparse checker, __user has no use.
- */
-#ifdef __CHECKER__
-# define __user		__attribute__((noderef, address_space(1)))
-#else
-# define __user
-#endif
-
-/**
  * struct ica_rsa_modexpo
  *
  * Requirements:
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index f1e8c42..12c208f 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1696,7 +1696,7 @@ config TT_DMA_EMUL
 
 config MAC_SCSI
 	bool "Macintosh NCR5380 SCSI"
-	depends on MAC && SCSI
+	depends on MAC && SCSI=y
 	help
 	  This is the NCR 5380 SCSI controller included on most of the 68030
 	  based Macintoshes.  If you have one of these say Y and read the
@@ -1717,7 +1717,7 @@ config SCSI_MAC_ESP
 
 config MVME147_SCSI
 	bool "WD33C93 SCSI driver for MVME147"
-	depends on MVME147 && SCSI
+	depends on MVME147 && SCSI=y
 	help
 	  Support for the on-board SCSI controller on the Motorola MVME147
 	  single-board computer.
@@ -1758,7 +1758,7 @@ config SUN3_SCSI
 
 config SUN3X_ESP
 	bool "Sun3x ESP SCSI"
-	depends on SUN3X && SCSI
+	depends on SUN3X && SCSI=y
 	help
 	  The ESP was an on-board SCSI controller used on Sun 3/80
 	  machines.  Say Y here to compile in support for it.
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index c562369..e3b9692 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -1105,6 +1105,7 @@ MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("AHCI SATA low-level driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 module_init(ahci_init);
 module_exit(ahci_exit);
diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
index 54b3286..13f2304 100644
--- a/drivers/scsi/arm/Kconfig
+++ b/drivers/scsi/arm/Kconfig
@@ -3,7 +3,7 @@
 #
 config SCSI_ACORNSCSI_3
 	tristate "Acorn SCSI card (aka30) support"
-	depends on ARCH_ACORN && SCSI
+	depends on ARCH_ACORN && SCSI && BROKEN
 	help
 	  This enables support for the Acorn SCSI card (aka30). If you have an
 	  Acorn system with one of these, say Y. If unsure, say N.
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index a2cfade..d96ebf9 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -32,7 +32,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ata_piix"
-#define DRV_VERSION	"1.03"
+#define DRV_VERSION	"1.04"
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 73b1f72..f4e7dcb 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2268,19 +2268,6 @@ void ata_qc_prep(struct ata_queued_cmd *qc)
  *	spin_lock_irqsave(host_set lock)
  */
 
-
-
-/**
- *	ata_sg_init_one - Prepare a one-entry scatter-gather list.
- *	@qc:  Queued command
- *	@buf:  transfer buffer
- *	@buflen:  length of buf
- *
- *	Builds a single-entry scatter-gather list to initiate a
- *	transfer utilizing the specified buffer.
- *
- *	LOCKING:
- */
 void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
 {
 	struct scatterlist *sg;
@@ -2312,18 +2299,6 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
  *	spin_lock_irqsave(host_set lock)
  */
 
-
-/**
- *	ata_sg_init - Assign a scatter gather list to a queued command
- *	@qc:  Queued command
- *	@sg:  Scatter-gather list
- *	@n_elem:  length of sg list
- *
- *	Attaches a scatter-gather list to a queued command.
- *
- *	LOCKING:
- */
-
 void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
 		 unsigned int n_elem)
 {
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index d90430b..3e7f4843 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -26,7 +26,7 @@
 #define __LIBATA_H__
 
 #define DRV_NAME	"libata"
-#define DRV_VERSION	"1.11"	/* must be exactly four chars */
+#define DRV_VERSION	"1.12"	/* must be exactly four chars */
 
 struct ata_scsi_args {
 	u16			*id;
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 5c1d441..919fb31 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -40,7 +40,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"1.01"
+#define DRV_VERSION	"1.02"
 
 
 enum {
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 97034d3..d579761 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -211,7 +211,7 @@ comment "Non-8250 serial port support"
 
 config SERIAL_AMBA_PL010
 	tristate "ARM AMBA PL010 serial port support"
-	depends on ARM_AMBA
+	depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
 	select SERIAL_CORE
 	help
 	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
@@ -819,7 +819,7 @@ config SERIAL_M32R_SIO_CONSOLE
 
 config SERIAL_M32R_PLDSIO
 	bool "M32R SIO I/F on a PLD"
-	depends on SERIAL_M32R_SIO=y
+	depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PALT_USRV || PLAT_M32700UT)
 	default n
 	help
 	  Say Y here if you want to use the M32R serial controller
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 0301fea..9b50560 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -1123,7 +1123,7 @@ static int __init m32r_sio_console_setup(struct console *co, char *options)
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-extern struct uart_driver m32r_sio_reg;
+static struct uart_driver m32r_sio_reg;
 static struct console m32r_sio_console = {
 	.name		= "ttyS",
 	.write		= m32r_sio_console_write,
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 840815f..12d1f14 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -1093,6 +1093,7 @@ int __init sn_serial_console_early_setup(void)
 		return -1;
 
 	sal_console_port.sc_ops = &poll_ops;
+	spin_lock_init(&sal_console_port.sc_port.lock);
 	early_sn_setup();	/* Find SAL entry points */
 	register_console(&sal_console_early);
 
diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c
index 02412e3..3b266af 100644
--- a/drivers/usb/input/wacom.c
+++ b/drivers/usb/input/wacom.c
@@ -342,9 +342,6 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
 		goto exit;
 	}
 
-	x = le16_to_cpu(*(__le16 *) &data[2]);
-	y = le16_to_cpu(*(__le16 *) &data[4]);
-
 	input_regs(dev, regs);
 
 	if (data[1] & 0x10) { /* in prox */
@@ -373,15 +370,17 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
 		}
 	}
 
-	if (data[1] & 0x80) {
+	if (data[1] & 0x90) {
+		x = le16_to_cpu(*(__le16 *) &data[2]);
+		y = le16_to_cpu(*(__le16 *) &data[4]);
 		input_report_abs(dev, ABS_X, x);
 		input_report_abs(dev, ABS_Y, y);
-	}
-	if (wacom->tool[0] != BTN_TOOL_MOUSE) {
-		input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
-		input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
-		input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
-		input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
+		if (wacom->tool[0] != BTN_TOOL_MOUSE) {
+			input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
+			input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
+			input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
+			input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
+		}
 	}
 
 	input_report_key(dev, wacom->tool[0], data[1] & 0x10);
@@ -568,7 +567,7 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 
 	/* Cintiq doesn't send data when RDY bit isn't set */
 	if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
-		return;
+		goto exit;
 
 	if (wacom->features->type >= INTUOS3) {
 		input_report_abs(dev, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index aa9d008..508a210 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -2,6 +2,8 @@
  * The USB Monitor, inspired by Dave Harding's USBMon.
  *
  * mon_main.c: Main file, module initiation and exit, registrations, etc.
+ *
+ * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
  */
 
 #include <linux/kernel.h>
@@ -311,7 +313,7 @@ static int __init mon_init(void)
 
 	mondir = debugfs_create_dir("usbmon", NULL);
 	if (IS_ERR(mondir)) {
-		printk(KERN_NOTICE TAG ": debugs is not available\n");
+		printk(KERN_NOTICE TAG ": debugfs is not available\n");
 		return -ENODEV;
 	}
 	if (mondir == NULL) {
diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h
index ed35c18..9b06784 100644
--- a/drivers/usb/mon/usb_mon.h
+++ b/drivers/usb/mon/usb_mon.h
@@ -1,5 +1,7 @@
 /*
  * The USB Monitor, inspired by Dave Harding's USBMon.
+ *
+ * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
  */
 
 #ifndef __USB_MON_H
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 576f3b8..4528a00 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -1922,7 +1922,7 @@ static int genelink_rx_fixup (struct usbnet *dev, struct sk_buff *skb)
 
 			// copy the packet data to the new skb
 			memcpy(skb_put(gl_skb, size), packet->packet_data, size);
-			skb_return (dev, skb);
+			skb_return (dev, gl_skb);
 		}
 
 		// advance to the next packet
diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c
index 2a1d489e..fc01397 100644
--- a/drivers/usb/net/zd1201.c
+++ b/drivers/usb/net/zd1201.c
@@ -346,8 +346,7 @@ static void zd1201_usbrx(struct urb *urb, struct pt_regs *regs)
 			if (datalen<14)
 				goto resubmit;
 			if ((seq & IEEE80211_SCTL_FRAG) == 0) {
-				frag = kmalloc(sizeof(struct zd1201_frag*),
-				    GFP_ATOMIC);
+				frag = kmalloc(sizeof(*frag), GFP_ATOMIC);
 				if (!frag)
 					goto resubmit;
 				skb = dev_alloc_skb(IEEE80211_DATA_LEN +14+2);
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index cbff983..5fe182d 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,7 +6,7 @@ menu "Console display driver support"
 
 config VGA_CONSOLE
 	bool "VGA text console" if EMBEDDED || !X86
-	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC
+	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE
 	default y
 	help
 	  Saying Y here will allow you to use Linux in text mode through a
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index d2e19f6..4ff853f 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -628,7 +628,7 @@ fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
 int
 fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
 {
-	int err;
+	int err, flags = info->flags;
 
 	if (var->activate & FB_ACTIVATE_INV_MODE) {
 		struct fb_videomode mode1, mode2;
@@ -682,7 +682,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
 			    !list_empty(&info->modelist))
 				err = fb_add_videomode(&mode, &info->modelist);
 
-			if (!err && info->flags & FBINFO_MISC_USEREVENT) {
+			if (!err && (flags & FBINFO_MISC_USEREVENT)) {
 				struct fb_event event;
 
 				info->flags &= ~FBINFO_MISC_USEREVENT;
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c
index 298bc9c..a112a17 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/intelfb/intelfbdrv.c
@@ -583,23 +583,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return -ENODEV;
 	}
 
-	/* Map the fb and MMIO regions */
-	dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
-		(dinfo->aperture.physical, dinfo->aperture.size);
-	if (!dinfo->aperture.virtual) {
-		ERR_MSG("Cannot remap FB region.\n");
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-	dinfo->mmio_base =
-		(u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
-					       INTEL_REG_SIZE);
-	if (!dinfo->mmio_base) {
-		ERR_MSG("Cannot remap MMIO region.\n");
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
 	/* Get the chipset info. */
 	dinfo->pci_chipset = pdev->device;
 
@@ -630,9 +613,15 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dinfo->accel = 0;
 	}
 
+	if (MB(voffset) < stolen_size)
+		offset = (stolen_size >> 12);
+	else
+		offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
+
 	/* Framebuffer parameters - Use all the stolen memory if >= vram */
-	if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) {
+	if (ROUND_UP_TO_PAGE(stolen_size) >= ((offset << 12) +  MB(vram))) {
 		dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size);
+		dinfo->fb.offset = 0;
 		dinfo->fbmem_gart = 0;
 	} else {
 		dinfo->fb.size =  MB(vram);
@@ -663,11 +652,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return -ENODEV;
 	}
 
-	if (MB(voffset) < stolen_size)
-		offset = (stolen_size >> 12);
-	else
-		offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
-
 	/* set the mem offsets - set them after the already used pages */
 	if (dinfo->accel) {
 		dinfo->ring.offset = offset + gtt_info.current_memory;
@@ -682,6 +666,26 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
 			+ (dinfo->cursor.size >> 12);
 	}
 
+	/* Map the fb and MMIO regions */
+	/* ioremap only up to the end of used aperture */
+	dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
+		(dinfo->aperture.physical, (dinfo->fb.offset << 12)
+		 + dinfo->fb.size);
+	if (!dinfo->aperture.virtual) {
+		ERR_MSG("Cannot remap FB region.\n");
+		cleanup(dinfo);
+		return -ENODEV;
+	}
+
+	dinfo->mmio_base =
+		(u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
+					       INTEL_REG_SIZE);
+	if (!dinfo->mmio_base) {
+		ERR_MSG("Cannot remap MMIO region.\n");
+		cleanup(dinfo);
+		return -ENODEV;
+	}
+
 	/* Allocate memories (which aren't stolen) */
 	if (dinfo->accel) {
 		if (!(dinfo->gtt_ring_mem =
diff --git a/drivers/video/radeonfb.c b/drivers/video/radeonfb.c
index c463870..a78b9bd 100644
--- a/drivers/video/radeonfb.c
+++ b/drivers/video/radeonfb.c
@@ -80,7 +80,7 @@
 #include <video/radeon.h>
 #include <linux/radeonfb.h>
 
-#define DEBUG	1
+#define DEBUG  0
 
 #if DEBUG
 #define RTRACE		printk