Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input layer fixes from Dmitry Torokhov:
 "Fixes for v7 protocol for ALPS devices and few other driver fixes.

  Also users can request input events to be stamped with boot time
  timestamps, in addition to real and monotonic timestamps"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: hil_kbd - fix incorrect use of init_completion
  Input: alps - v7: document the v7 touchpad packet protocol
  Input: alps - v7: fix finger counting for > 2 fingers on clickpads
  Input: alps - v7: sometimes a single touch is reported in mt[1]
  Input: alps - v7: ignore new packets
  Input: evdev - add CLOCK_BOOTTIME support
  Input: psmouse - expose drift duration for IBM trackpoints
  Input: stmpe - bias keypad columns properly
  Input: stmpe - enforce device tree only mode
  mfd: stmpe: add pull up/down register offsets for STMPE
  Input: optimize events_per_packet count calculation
  Input: edt-ft5x06 - fixed a macro coding style issue
  Input: gpio_keys - replace timer and workqueue with delayed workqueue
  Input: gpio_keys - allow separating gpio and irq in device tree

12 files changed, 291 insertions, 157 deletions

diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 8afa28e..18d4b2c 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -28,6 +28,13 @@
 #include <linux/cdev.h>
 #include "input-compat.h"
 
+enum evdev_clock_type {
+	EV_CLK_REAL = 0,
+	EV_CLK_MONO,
+	EV_CLK_BOOT,
+	EV_CLK_MAX
+};
+
 struct evdev {
 	int open;
 	struct input_handle handle;
@@ -49,12 +56,32 @@ struct evdev_client {
 	struct fasync_struct *fasync;
 	struct evdev *evdev;
 	struct list_head node;
-	int clkid;
+	int clk_type;
 	bool revoked;
 	unsigned int bufsize;
 	struct input_event buffer[];
 };
 
+static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid)
+{
+	switch (clkid) {
+
+	case CLOCK_REALTIME:
+		client->clk_type = EV_CLK_REAL;
+		break;
+	case CLOCK_MONOTONIC:
+		client->clk_type = EV_CLK_MONO;
+		break;
+	case CLOCK_BOOTTIME:
+		client->clk_type = EV_CLK_BOOT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /* flush queued events of type @type, caller must hold client->buffer_lock */
 static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
 {
@@ -108,8 +135,11 @@ static void evdev_queue_syn_dropped(struct evdev_client *client)
 	struct input_event ev;
 	ktime_t time;
 
-	time = (client->clkid == CLOCK_MONOTONIC) ?
-		ktime_get() : ktime_get_real();
+	time = client->clk_type == EV_CLK_REAL ?
+			ktime_get_real() :
+			client->clk_type == EV_CLK_MONO ?
+				ktime_get() :
+				ktime_get_boottime();
 
 	ev.time = ktime_to_timeval(time);
 	ev.type = EV_SYN;
@@ -159,7 +189,7 @@ static void __pass_event(struct evdev_client *client,
 
 static void evdev_pass_values(struct evdev_client *client,
 			const struct input_value *vals, unsigned int count,
-			ktime_t mono, ktime_t real)
+			ktime_t *ev_time)
 {
 	struct evdev *evdev = client->evdev;
 	const struct input_value *v;
@@ -169,8 +199,7 @@ static void evdev_pass_values(struct evdev_client *client,
 	if (client->revoked)
 		return;
 
-	event.time = ktime_to_timeval(client->clkid == CLOCK_MONOTONIC ?
-				      mono : real);
+	event.time = ktime_to_timeval(ev_time[client->clk_type]);
 
 	/* Interrupts are disabled, just acquire the lock. */
 	spin_lock(&client->buffer_lock);
@@ -198,21 +227,22 @@ static void evdev_events(struct input_handle *handle,
 {
 	struct evdev *evdev = handle->private;
 	struct evdev_client *client;
-	ktime_t time_mono, time_real;
+	ktime_t ev_time[EV_CLK_MAX];
 
-	time_mono = ktime_get();
-	time_real = ktime_mono_to_real(time_mono);
+	ev_time[EV_CLK_MONO] = ktime_get();
+	ev_time[EV_CLK_REAL] = ktime_mono_to_real(ev_time[EV_CLK_MONO]);
+	ev_time[EV_CLK_BOOT] = ktime_mono_to_any(ev_time[EV_CLK_MONO],
+						 TK_OFFS_BOOT);
 
 	rcu_read_lock();
 
 	client = rcu_dereference(evdev->grab);
 
 	if (client)
-		evdev_pass_values(client, vals, count, time_mono, time_real);
+		evdev_pass_values(client, vals, count, ev_time);
 	else
 		list_for_each_entry_rcu(client, &evdev->client_list, node)
-			evdev_pass_values(client, vals, count,
-					  time_mono, time_real);
+			evdev_pass_values(client, vals, count, ev_time);
 
 	rcu_read_unlock();
 }
@@ -877,10 +907,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 	case EVIOCSCLOCKID:
 		if (copy_from_user(&i, p, sizeof(unsigned int)))
 			return -EFAULT;
-		if (i != CLOCK_MONOTONIC && i != CLOCK_REALTIME)
-			return -EINVAL;
-		client->clkid = i;
-		return 0;
+
+		return evdev_set_clk_type(client, i);
 
 	case EVIOCGKEYCODE:
 		return evdev_handle_get_keycode(dev, p);
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 04217c2..213e3a1 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1974,18 +1974,22 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev)
 
 	events = mt_slots + 1; /* count SYN_MT_REPORT and SYN_REPORT */
 
-	for (i = 0; i < ABS_CNT; i++) {
-		if (test_bit(i, dev->absbit)) {
-			if (input_is_mt_axis(i))
-				events += mt_slots;
-			else
-				events++;
+	if (test_bit(EV_ABS, dev->evbit)) {
+		for (i = 0; i < ABS_CNT; i++) {
+			if (test_bit(i, dev->absbit)) {
+				if (input_is_mt_axis(i))
+					events += mt_slots;
+				else
+					events++;
+			}
 		}
 	}
 
-	for (i = 0; i < REL_CNT; i++)
-		if (test_bit(i, dev->relbit))
-			events++;
+	if (test_bit(EV_REL, dev->evbit)) {
+		for (i = 0; i < REL_CNT; i++)
+			if (test_bit(i, dev->relbit))
+				events++;
+	}
 
 	/* Make room for KEY and MSC events */
 	events += 7;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 96ee26c..a5d9b3f 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -559,6 +559,7 @@ config KEYBOARD_SH_KEYSC
 config KEYBOARD_STMPE
 	tristate "STMPE keypad support"
 	depends on MFD_STMPE
+	depends on OF
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad controller on STMPE I/O
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index d4dd78a..883d6aed 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -35,9 +35,13 @@
 struct gpio_button_data {
 	const struct gpio_keys_button *button;
 	struct input_dev *input;
-	struct timer_list timer;
-	struct work_struct work;
-	unsigned int timer_debounce;	/* in msecs */
+
+	struct timer_list release_timer;
+	unsigned int release_delay;	/* in msecs, for IRQ-only buttons */
+
+	struct delayed_work work;
+	unsigned int software_debounce;	/* in msecs, for GPIO-driven buttons */
+
 	unsigned int irq;
 	spinlock_t lock;
 	bool disabled;
@@ -116,11 +120,14 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata)
 {
 	if (!bdata->disabled) {
 		/*
-		 * Disable IRQ and possible debouncing timer.
+		 * Disable IRQ and associated timer/work structure.
 		 */
 		disable_irq(bdata->irq);
-		if (bdata->timer_debounce)
-			del_timer_sync(&bdata->timer);
+
+		if (gpio_is_valid(bdata->button->gpio))
+			cancel_delayed_work_sync(&bdata->work);
+		else
+			del_timer_sync(&bdata->release_timer);
 
 		bdata->disabled = true;
 	}
@@ -343,7 +350,7 @@ static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata)
 static void gpio_keys_gpio_work_func(struct work_struct *work)
 {
 	struct gpio_button_data *bdata =
-		container_of(work, struct gpio_button_data, work);
+		container_of(work, struct gpio_button_data, work.work);
 
 	gpio_keys_gpio_report_event(bdata);
 
@@ -351,13 +358,6 @@ static void gpio_keys_gpio_work_func(struct work_struct *work)
 		pm_relax(bdata->input->dev.parent);
 }
 
-static void gpio_keys_gpio_timer(unsigned long _data)
-{
-	struct gpio_button_data *bdata = (struct gpio_button_data *)_data;
-
-	schedule_work(&bdata->work);
-}
-
 static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
 {
 	struct gpio_button_data *bdata = dev_id;
@@ -366,11 +366,10 @@ static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
 
 	if (bdata->button->wakeup)
 		pm_stay_awake(bdata->input->dev.parent);
-	if (bdata->timer_debounce)
-		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(bdata->timer_debounce));
-	else
-		schedule_work(&bdata->work);
+
+	mod_delayed_work(system_wq,
+			 &bdata->work,
+			 msecs_to_jiffies(bdata->software_debounce));
 
 	return IRQ_HANDLED;
 }
@@ -408,7 +407,7 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
 		input_event(input, EV_KEY, button->code, 1);
 		input_sync(input);
 
-		if (!bdata->timer_debounce) {
+		if (!bdata->release_delay) {
 			input_event(input, EV_KEY, button->code, 0);
 			input_sync(input);
 			goto out;
@@ -417,9 +416,9 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
 		bdata->key_pressed = true;
 	}
 
-	if (bdata->timer_debounce)
-		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(bdata->timer_debounce));
+	if (bdata->release_delay)
+		mod_timer(&bdata->release_timer,
+			jiffies + msecs_to_jiffies(bdata->release_delay));
 out:
 	spin_unlock_irqrestore(&bdata->lock, flags);
 	return IRQ_HANDLED;
@@ -429,10 +428,10 @@ static void gpio_keys_quiesce_key(void *data)
 {
 	struct gpio_button_data *bdata = data;
 
-	if (bdata->timer_debounce)
-		del_timer_sync(&bdata->timer);
-
-	cancel_work_sync(&bdata->work);
+	if (gpio_is_valid(bdata->button->gpio))
+		cancel_delayed_work_sync(&bdata->work);
+	else
+		del_timer_sync(&bdata->release_timer);
 }
 
 static int gpio_keys_setup_key(struct platform_device *pdev,
@@ -466,23 +465,25 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 					button->debounce_interval * 1000);
 			/* use timer if gpiolib doesn't provide debounce */
 			if (error < 0)
-				bdata->timer_debounce =
+				bdata->software_debounce =
 						button->debounce_interval;
 		}
 
-		irq = gpio_to_irq(button->gpio);
-		if (irq < 0) {
-			error = irq;
-			dev_err(dev,
-				"Unable to get irq number for GPIO %d, error %d\n",
-				button->gpio, error);
-			return error;
+		if (button->irq) {
+			bdata->irq = button->irq;
+		} else {
+			irq = gpio_to_irq(button->gpio);
+			if (irq < 0) {
+				error = irq;
+				dev_err(dev,
+					"Unable to get irq number for GPIO %d, error %d\n",
+					button->gpio, error);
+				return error;
+			}
+			bdata->irq = irq;
 		}
-		bdata->irq = irq;
 
-		INIT_WORK(&bdata->work, gpio_keys_gpio_work_func);
-		setup_timer(&bdata->timer,
-			    gpio_keys_gpio_timer, (unsigned long)bdata);
+		INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);
 
 		isr = gpio_keys_gpio_isr;
 		irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
@@ -499,8 +500,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 			return -EINVAL;
 		}
 
-		bdata->timer_debounce = button->debounce_interval;
-		setup_timer(&bdata->timer,
+		bdata->release_delay = button->debounce_interval;
+		setup_timer(&bdata->release_timer,
 			    gpio_keys_irq_timer, (unsigned long)bdata);
 
 		isr = gpio_keys_irq_isr;
@@ -510,7 +511,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 	input_set_capability(input, button->type ?: EV_KEY, button->code);
 
 	/*
-	 * Install custom action to cancel debounce timer and
+	 * Install custom action to cancel release timer and
 	 * workqueue item.
 	 */
 	error = devm_add_action(&pdev->dev, gpio_keys_quiesce_key, bdata);
@@ -618,33 +619,30 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 	i = 0;
 	for_each_child_of_node(node, pp) {
-		int gpio = -1;
 		enum of_gpio_flags flags;
 
 		button = &pdata->buttons[i++];
 
-		if (!of_find_property(pp, "gpios", NULL)) {
-			button->irq = irq_of_parse_and_map(pp, 0);
-			if (button->irq == 0) {
-				i--;
-				pdata->nbuttons--;
-				dev_warn(dev, "Found button without gpios or irqs\n");
-				continue;
-			}
-		} else {
-			gpio = of_get_gpio_flags(pp, 0, &flags);
-			if (gpio < 0) {
-				error = gpio;
+		button->gpio = of_get_gpio_flags(pp, 0, &flags);
+		if (button->gpio < 0) {
+			error = button->gpio;
+			if (error != -ENOENT) {
 				if (error != -EPROBE_DEFER)
 					dev_err(dev,
 						"Failed to get gpio flags, error: %d\n",
 						error);
 				return ERR_PTR(error);
 			}
+		} else {
+			button->active_low = flags & OF_GPIO_ACTIVE_LOW;
 		}
 
-		button->gpio = gpio;
-		button->active_low = flags & OF_GPIO_ACTIVE_LOW;
+		button->irq = irq_of_parse_and_map(pp, 0);
+
+		if (!gpio_is_valid(button->gpio) && !button->irq) {
+			dev_err(dev, "Found button without gpios or irqs\n");
+			return ERR_PTR(-EINVAL);
+		}
 
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {
 			dev_err(dev, "Button without keycode: 0x%x\n",
@@ -659,6 +657,8 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 		button->wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
 
+		button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL);
+
 		if (of_property_read_u32(pp, "debounce-interval",
 					 &button->debounce_interval))
 			button->debounce_interval = 5;
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index 610a8af..5b152f2 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -473,7 +473,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
 	if (error)
 		goto bail1;
 
-	init_completion(&dev->cmd_done);
+	reinit_completion(&dev->cmd_done);
 	serio_write(serio, 0);
 	serio_write(serio, 0);
 	serio_write(serio, HIL_PKT_CMD >> 8);
@@ -482,7 +482,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
 	if (error)
 		goto bail1;
 
-	init_completion(&dev->cmd_done);
+	reinit_completion(&dev->cmd_done);
 	serio_write(serio, 0);
 	serio_write(serio, 0);
 	serio_write(serio, HIL_PKT_CMD >> 8);
@@ -491,7 +491,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
 	if (error)
 		goto bail1;
 
-	init_completion(&dev->cmd_done);
+	reinit_completion(&dev->cmd_done);
 	serio_write(serio, 0);
 	serio_write(serio, 0);
 	serio_write(serio, HIL_PKT_CMD >> 8);
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
index ef5e67f..fe6e3f2 100644
--- a/drivers/input/keyboard/stmpe-keypad.c
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -45,13 +45,14 @@
 #define STMPE_KEYPAD_MAX_ROWS		8
 #define STMPE_KEYPAD_MAX_COLS		8
 #define STMPE_KEYPAD_ROW_SHIFT		3
-#define STMPE_KEYPAD_KEYMAP_SIZE	\
+#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
 	(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
 
 /**
  * struct stmpe_keypad_variant - model-specific attributes
  * @auto_increment: whether the KPC_DATA_BYTE register address
  *		    auto-increments on multiple read
+ * @set_pullup: whether the pins need to have their pull-ups set
  * @num_data: number of data bytes
  * @num_normal_data: number of normal keys' data bytes
  * @max_cols: maximum number of columns supported
@@ -61,6 +62,7 @@
  */
 struct stmpe_keypad_variant {
 	bool		auto_increment;
+	bool		set_pullup;
 	int		num_data;
 	int		num_normal_data;
 	int		max_cols;
@@ -81,6 +83,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
 	},
 	[STMPE2401] = {
 		.auto_increment		= false,
+		.set_pullup		= true,
 		.num_data		= 3,
 		.num_normal_data	= 2,
 		.max_cols		= 8,
@@ -90,6 +93,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
 	},
 	[STMPE2403] = {
 		.auto_increment		= true,
+		.set_pullup		= true,
 		.num_data		= 5,
 		.num_normal_data	= 3,
 		.max_cols		= 8,
@@ -99,16 +103,30 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
 	},
 };
 
+/**
+ * struct stmpe_keypad - STMPE keypad state container
+ * @stmpe: pointer to parent STMPE device
+ * @input: spawned input device
+ * @variant: STMPE variant
+ * @debounce_ms: debounce interval, in ms.  Maximum is
+ *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ * @rows: bitmask for the rows
+ * @cols: bitmask for the columns
+ * @keymap: the keymap
+ */
 struct stmpe_keypad {
 	struct stmpe *stmpe;
 	struct input_dev *input;
 	const struct stmpe_keypad_variant *variant;
-	const struct stmpe_keypad_platform_data *plat;
-
+	unsigned int debounce_ms;
+	unsigned int scan_count;
+	bool no_autorepeat;
 	unsigned int rows;
 	unsigned int cols;
-
-	unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
+	unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
 };
 
 static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
@@ -171,7 +189,10 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
 	unsigned int col_gpios = variant->col_gpios;
 	unsigned int row_gpios = variant->row_gpios;
 	struct stmpe *stmpe = keypad->stmpe;
+	u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB];
 	unsigned int pins = 0;
+	unsigned int pu_pins = 0;
+	int ret;
 	int i;
 
 	/*
@@ -188,8 +209,10 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
 	for (i = 0; i < variant->max_cols; i++) {
 		int num = __ffs(col_gpios);
 
-		if (keypad->cols & (1 << i))
+		if (keypad->cols & (1 << i)) {
 			pins |= 1 << num;
+			pu_pins |= 1 << num;
+		}
 
 		col_gpios &= ~(1 << num);
 	}
@@ -203,20 +226,43 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
 		row_gpios &= ~(1 << num);
 	}
 
-	return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+	ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+	if (ret)
+		return ret;
+
+	/*
+	 * On STMPE24xx, set pin bias to pull-up on all keypad input
+	 * pins (columns), this incidentally happen to be maximum 8 pins
+	 * and placed at GPIO0-7 so only the LSB of the pull up register
+	 * ever needs to be written.
+	 */
+	if (variant->set_pullup) {
+		u8 val;
+
+		ret = stmpe_reg_read(stmpe, pureg);
+		if (ret)
+			return ret;
+
+		/* Do not touch unused pins, may be used for GPIO */
+		val = ret & ~pu_pins;
+		val |= pu_pins;
+
+		ret = stmpe_reg_write(stmpe, pureg, val);
+	}
+
+	return 0;
 }
 
 static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
 {
-	const struct stmpe_keypad_platform_data *plat = keypad->plat;
 	const struct stmpe_keypad_variant *variant = keypad->variant;
 	struct stmpe *stmpe = keypad->stmpe;
 	int ret;
 
-	if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+	if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
 		return -EINVAL;
 
-	if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+	if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
 		return -EINVAL;
 
 	ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
@@ -245,7 +291,7 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
 
 	ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
 			     STMPE_KPC_CTRL_MSB_SCAN_COUNT,
-			     plat->scan_count << 4);
+			     keypad->scan_count << 4);
 	if (ret < 0)
 		return ret;
 
@@ -253,17 +299,18 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
 			      STMPE_KPC_CTRL_LSB_SCAN |
 			      STMPE_KPC_CTRL_LSB_DEBOUNCE,
 			      STMPE_KPC_CTRL_LSB_SCAN |
-			      (plat->debounce_ms << 1));
+			      (keypad->debounce_ms << 1));
 }
 
-static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
+static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
+					u32 used_rows, u32 used_cols)
 {
 	int row, col;
 
-	for (row = 0; row < STMPE_KEYPAD_MAX_ROWS; row++) {
-		for (col = 0; col < STMPE_KEYPAD_MAX_COLS; col++) {
+	for (row = 0; row < used_rows; row++) {
+		for (col = 0; col < used_cols; col++) {
 			int code = MATRIX_SCAN_CODE(row, col,
-						STMPE_KEYPAD_ROW_SHIFT);
+						    STMPE_KEYPAD_ROW_SHIFT);
 			if (keypad->keymap[code] != KEY_RESERVED) {
 				keypad->rows |= 1 << row;
 				keypad->cols |= 1 << col;
@@ -272,51 +319,17 @@ static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
 	}
 }
 
-#ifdef CONFIG_OF
-static const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
-	struct device_node *np = dev->of_node;
-	struct stmpe_keypad_platform_data *plat;
-
-	if (!np)
-		return ERR_PTR(-ENODEV);
-
-	plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
-	if (!plat)
-		return ERR_PTR(-ENOMEM);
-
-	of_property_read_u32(np, "debounce-interval", &plat->debounce_ms);
-	of_property_read_u32(np, "st,scan-count", &plat->scan_count);
-
-	plat->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
-
-	return plat;
-}
-#else
-static inline const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
-	return ERR_PTR(-EINVAL);
-}
-#endif
-
 static int stmpe_keypad_probe(struct platform_device *pdev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
-	const struct stmpe_keypad_platform_data *plat;
+	struct device_node *np = pdev->dev.of_node;
 	struct stmpe_keypad *keypad;
 	struct input_dev *input;
+	u32 rows;
+	u32 cols;
 	int error;
 	int irq;
 
-	plat = stmpe->pdata->keypad;
-	if (!plat) {
-		plat = stmpe_keypad_of_probe(&pdev->dev);
-		if (IS_ERR(plat))
-			return PTR_ERR(plat);
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
@@ -326,6 +339,13 @@ static int stmpe_keypad_probe(struct platform_device *pdev)
 	if (!keypad)
 		return -ENOMEM;
 
+	keypad->stmpe = stmpe;
+	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+	of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
+	of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
+	keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
+
 	input = devm_input_allocate_device(&pdev->dev);
 	if (!input)
 		return -ENOMEM;
@@ -334,23 +354,22 @@ static int stmpe_keypad_probe(struct platform_device *pdev)
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &pdev->dev;
 
-	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
-					   STMPE_KEYPAD_MAX_ROWS,
-					   STMPE_KEYPAD_MAX_COLS,
+	error = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
+	if (error)
+		return error;
+
+	error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
 					   keypad->keymap, input);
 	if (error)
 		return error;
 
 	input_set_capability(input, EV_MSC, MSC_SCAN);
-	if (!plat->no_autorepeat)
+	if (!keypad->no_autorepeat)
 		__set_bit(EV_REP, input->evbit);
 
-	stmpe_keypad_fill_used_pins(keypad);
+	stmpe_keypad_fill_used_pins(keypad, rows, cols);
 
-	keypad->stmpe = stmpe;
-	keypad->plat = plat;
 	keypad->input = input;
-	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
 
 	error = stmpe_keypad_chip_init(keypad);
 	if (error < 0)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index d125a01..d88d73d 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -881,6 +881,34 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
 					  unsigned char *pkt,
 					  unsigned char pkt_id)
 {
+	/*
+	 *       packet-fmt    b7   b6    b5   b4   b3   b2   b1   b0
+	 * Byte0 TWO & MULTI    L    1     R    M    1 Y0-2 Y0-1 Y0-0
+	 * Byte0 NEW            L    1  X1-5    1    1 Y0-2 Y0-1 Y0-0
+	 * Byte1            Y0-10 Y0-9  Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
+	 * Byte2            X0-11    1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
+	 * Byte3            X1-11    1  X0-4 X0-3    1 X0-2 X0-1 X0-0
+	 * Byte4 TWO        X1-10  TWO  X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
+	 * Byte4 MULTI      X1-10  TWO  X1-9 X1-8 X1-7 X1-6 Y1-5    1
+	 * Byte4 NEW        X1-10  TWO  X1-9 X1-8 X1-7 X1-6    0    0
+	 * Byte5 TWO & NEW  Y1-10    0  Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
+	 * Byte5 MULTI      Y1-10    0  Y1-9 Y1-8 Y1-7 Y1-6  F-1  F-0
+	 * L:         Left button
+	 * R / M:     Non-clickpads: Right / Middle button
+	 *            Clickpads: When > 2 fingers are down, and some fingers
+	 *            are in the button area, then the 2 coordinates reported
+	 *            are for fingers outside the button area and these report
+	 *            extra fingers being present in the right / left button
+	 *            area. Note these fingers are not added to the F field!
+	 *            so if a TWO packet is received and R = 1 then there are
+	 *            3 fingers down, etc.
+	 * TWO:       1: Two touches present, byte 0/4/5 are in TWO fmt
+	 *            0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
+	 *               otherwise byte 0 bit 4 must be set and byte 0/4/5 are
+	 *               in NEW fmt
+	 * F:         Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
+	 */
+
 	mt[0].x = ((pkt[2] & 0x80) << 4);
 	mt[0].x |= ((pkt[2] & 0x3F) << 5);
 	mt[0].x |= ((pkt[3] & 0x30) >> 1);
@@ -919,18 +947,21 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
 
 static int alps_get_mt_count(struct input_mt_pos *mt)
 {
-	int i;
+	int i, fingers = 0;
 
-	for (i = 0; i < MAX_TOUCHES && mt[i].x != 0 && mt[i].y != 0; i++)
-		/* empty */;
+	for (i = 0; i < MAX_TOUCHES; i++) {
+		if (mt[i].x != 0 || mt[i].y != 0)
+			fingers++;
+	}
 
-	return i;
+	return fingers;
 }
 
 static int alps_decode_packet_v7(struct alps_fields *f,
 				  unsigned char *p,
 				  struct psmouse *psmouse)
 {
+	struct alps_data *priv = psmouse->private;
 	unsigned char pkt_id;
 
 	pkt_id = alps_get_packet_id_v7(p);
@@ -938,19 +969,52 @@ static int alps_decode_packet_v7(struct alps_fields *f,
 		return 0;
 	if (pkt_id == V7_PACKET_ID_UNKNOWN)
 		return -1;
+	/*
+	 * NEW packets are send to indicate a discontinuity in the finger
+	 * coordinate reporting. Specifically a finger may have moved from
+	 * slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for
+	 * us.
+	 *
+	 * NEW packets have 3 problems:
+	 * 1) They do not contain middle / right button info (on non clickpads)
+	 *    this can be worked around by preserving the old button state
+	 * 2) They do not contain an accurate fingercount, and they are
+	 *    typically send when the number of fingers changes. We cannot use
+	 *    the old finger count as that may mismatch with the amount of
+	 *    touch coordinates we've available in the NEW packet
+	 * 3) Their x data for the second touch is inaccurate leading to
+	 *    a possible jump of the x coordinate by 16 units when the first
+	 *    non NEW packet comes in
+	 * Since problems 2 & 3 cannot be worked around, just ignore them.
+	 */
+	if (pkt_id == V7_PACKET_ID_NEW)
+		return 1;
 
 	alps_get_finger_coordinate_v7(f->mt, p, pkt_id);
 
-	if (pkt_id == V7_PACKET_ID_TWO || pkt_id == V7_PACKET_ID_MULTI) {
-		f->left = (p[0] & 0x80) >> 7;
+	if (pkt_id == V7_PACKET_ID_TWO)
+		f->fingers = alps_get_mt_count(f->mt);
+	else /* pkt_id == V7_PACKET_ID_MULTI */
+		f->fingers = 3 + (p[5] & 0x03);
+
+	f->left = (p[0] & 0x80) >> 7;
+	if (priv->flags & ALPS_BUTTONPAD) {
+		if (p[0] & 0x20)
+			f->fingers++;
+		if (p[0] & 0x10)
+			f->fingers++;
+	} else {
 		f->right = (p[0] & 0x20) >> 5;
 		f->middle = (p[0] & 0x10) >> 4;
 	}
 
-	if (pkt_id == V7_PACKET_ID_TWO)
-		f->fingers = alps_get_mt_count(f->mt);
-	else if (pkt_id == V7_PACKET_ID_MULTI)
-		f->fingers = 3 + (p[5] & 0x03);
+	/* Sometimes a single touch is reported in mt[1] rather then mt[0] */
+	if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) {
+		f->mt[0].x = f->mt[1].x;
+		f->mt[0].y = f->mt[1].y;
+		f->mt[1].x = 0;
+		f->mt[1].y = 0;
+	}
 
 	return 0;
 }
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index 30c8b69..354d47e 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -227,6 +227,7 @@ TRACKPOINT_INT_ATTR(thresh, TP_THRESH, TP_DEF_THRESH);
 TRACKPOINT_INT_ATTR(upthresh, TP_UP_THRESH, TP_DEF_UP_THRESH);
 TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME, TP_DEF_Z_TIME);
 TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV, TP_DEF_JENKS_CURV);
+TRACKPOINT_INT_ATTR(drift_time, TP_DRIFT_TIME, TP_DEF_DRIFT_TIME);
 
 TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0,
 		    TP_DEF_PTSON);
@@ -246,6 +247,7 @@ static struct attribute *trackpoint_attrs[] = {
 	&psmouse_attr_upthresh.dattr.attr,
 	&psmouse_attr_ztime.dattr.attr,
 	&psmouse_attr_jenks.dattr.attr,
+	&psmouse_attr_drift_time.dattr.attr,
 	&psmouse_attr_press_to_select.dattr.attr,
 	&psmouse_attr_skipback.dattr.attr,
 	&psmouse_attr_ext_dev.dattr.attr,
@@ -312,6 +314,7 @@ static int trackpoint_sync(struct psmouse *psmouse, bool in_power_on_state)
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, upthresh);
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, ztime);
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, jenks);
+	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, drift_time);
 
 	/* toggles */
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, press_to_select);
@@ -332,6 +335,7 @@ static void trackpoint_defaults(struct trackpoint_data *tp)
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, upthresh);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, ztime);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, jenks);
+	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, drift_time);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, inertia);
 
 	/* toggles */
diff --git a/drivers/input/mouse/trackpoint.h b/drivers/input/mouse/trackpoint.h
index ecd0547..5617ed3 100644
--- a/drivers/input/mouse/trackpoint.h
+++ b/drivers/input/mouse/trackpoint.h
@@ -70,6 +70,9 @@
 #define TP_UP_THRESH		0x5A	/* Used to generate a 'click' on Z-axis */
 #define TP_Z_TIME		0x5E	/* How sharp of a press */
 #define TP_JENKS_CURV		0x5D	/* Minimum curvature for double click */
+#define TP_DRIFT_TIME		0x5F	/* How long a 'hands off' condition */
+					/* must last (x*107ms) for drift */
+					/* correction to occur */
 
 /*
  * Toggling Flag bits
@@ -120,6 +123,7 @@
 #define TP_DEF_UP_THRESH	0xFF
 #define TP_DEF_Z_TIME		0x26
 #define TP_DEF_JENKS_CURV	0x87
+#define TP_DEF_DRIFT_TIME	0x05
 
 /* Toggles */
 #define TP_DEF_MB		0x00
@@ -137,6 +141,7 @@ struct trackpoint_data
 	unsigned char draghys, mindrag;
 	unsigned char thresh, upthresh;
 	unsigned char ztime, jenks;
+	unsigned char drift_time;
 
 	/* toggles */
 	unsigned char press_to_select;
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 3793fcc..d4c24fb 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -850,9 +850,11 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
 }
 
 #define EDT_ATTR_CHECKSET(name, reg) \
+do {								\
 	if (pdata->name >= edt_ft5x06_attr_##name.limit_low &&		\
 	    pdata->name <= edt_ft5x06_attr_##name.limit_high)		\
-		edt_ft5x06_register_write(tsdata, reg, pdata->name)
+		edt_ft5x06_register_write(tsdata, reg, pdata->name);	\
+} while (0)
 
 #define EDT_GET_PROP(name, reg) {				\
 	u32 val;						\
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index e2f9df1..2d7fae9 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -519,6 +519,7 @@ static const u8 stmpe1601_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE1601_REG_GPIO_SET_DIR_LSB,
 	[STMPE_IDX_GPRER_LSB]	= STMPE1601_REG_GPIO_RE_LSB,
 	[STMPE_IDX_GPFER_LSB]	= STMPE1601_REG_GPIO_FE_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1601_REG_GPIO_PU_LSB,
 	[STMPE_IDX_GPAFR_U_MSB]	= STMPE1601_REG_GPIO_AF_U_MSB,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
 	[STMPE_IDX_ISGPIOR_MSB]	= STMPE1601_REG_INT_STA_GPIO_MSB,
@@ -667,6 +668,7 @@ static const u8 stmpe1801_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE1801_REG_GPIO_SET_DIR_LOW,
 	[STMPE_IDX_GPRER_LSB]	= STMPE1801_REG_GPIO_RE_LOW,
 	[STMPE_IDX_GPFER_LSB]	= STMPE1801_REG_GPIO_FE_LOW,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1801_REG_GPIO_PULL_UP_LOW,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
 	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1801_REG_INT_STA_GPIO_LOW,
 };
@@ -750,6 +752,8 @@ static const u8 stmpe24xx_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE24XX_REG_GPDR_LSB,
 	[STMPE_IDX_GPRER_LSB]	= STMPE24XX_REG_GPRER_LSB,
 	[STMPE_IDX_GPFER_LSB]	= STMPE24XX_REG_GPFER_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE24XX_REG_GPPUR_LSB,
+	[STMPE_IDX_GPPDR_LSB]	= STMPE24XX_REG_GPPDR_LSB,
 	[STMPE_IDX_GPAFR_U_MSB]	= STMPE24XX_REG_GPAFR_U_MSB,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE24XX_REG_IEGPIOR_LSB,
 	[STMPE_IDX_ISGPIOR_MSB]	= STMPE24XX_REG_ISGPIOR_MSB,
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index bee0abf..84adb46 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -188,6 +188,7 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STMPE1601_REG_GPIO_ED_MSB		0x8A
 #define STMPE1601_REG_GPIO_RE_LSB		0x8D
 #define STMPE1601_REG_GPIO_FE_LSB		0x8F
+#define STMPE1601_REG_GPIO_PU_LSB		0x91
 #define STMPE1601_REG_GPIO_AF_U_MSB		0x92
 
 #define STMPE1601_SYS_CTRL_ENABLE_GPIO		(1 << 3)
@@ -276,6 +277,8 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STMPE24XX_REG_GPEDR_MSB		0x8C
 #define STMPE24XX_REG_GPRER_LSB		0x91
 #define STMPE24XX_REG_GPFER_LSB		0x94
+#define STMPE24XX_REG_GPPUR_LSB		0x97
+#define STMPE24XX_REG_GPPDR_LSB		0x9a
 #define STMPE24XX_REG_GPAFR_U_MSB	0x9B
 
 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO		(1 << 3)