Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial

10 files changed, 71 insertions, 100 deletions

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 374621a..d23b543 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -242,7 +242,6 @@ static int allowed_drive_mask = 0x33;
 
 static int irqdma_allocated;
 
-#define LOCAL_END_REQUEST
 #define DEVICE_NAME "floppy"
 
 #include <linux/blkdev.h>
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index d6fcd0a..4135d8c 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -881,16 +881,6 @@ config FTAPE
 	  module. To compile this driver as a module, choose M here: the
 	  module will be called ftape.
 
-	  Note that the Ftape-HOWTO is out of date (sorry) and documents the
-	  older version 2.08 of this software but still contains useful
-	  information.  There is a web page with more recent documentation at
-	  <http://www.instmath.rwth-aachen.de/~heine/ftape/>.  This page
-	  always contains the latest release of the ftape driver and useful
-	  information (backup software, ftape related patches and
-	  documentation, FAQ).  Note that the file system interface has
-	  changed quite a bit compared to previous versions of ftape.  Please
-	  read <file:Documentation/ftape.txt>.
-
 source "drivers/char/ftape/Kconfig"
 
 endmenu
diff --git a/drivers/char/ftape/Kconfig b/drivers/char/ftape/Kconfig
index 7d3ecb5..0d65189 100644
--- a/drivers/char/ftape/Kconfig
+++ b/drivers/char/ftape/Kconfig
@@ -25,17 +25,7 @@ config ZFTAPE
 	  support", above) then `zft-compressor' will be loaded
 	  automatically by zftape when needed.
 
-	  Despite its name, zftape does NOT use compression by default.  The
-	  file <file:Documentation/ftape.txt> contains a short description of
-	  the most important changes in the file system interface compared to
-	  previous versions of ftape.  The ftape home page
-	  <http://www.instmath.rwth-aachen.de/~heine/ftape/> contains
-	  further information.
-
-	  IMPORTANT NOTE: zftape can read archives created by previous
-	  versions of ftape and provide file mark support (i.e. fast skipping
-	  between tape archives) but previous version of ftape will lack file
-	  mark support when reading archives produced by zftape.
+	  Despite its name, zftape does NOT use compression by default.
 
 config ZFT_DFLT_BLK_SZ
 	int "Default block size"
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 0e20780..bdaab699 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -738,7 +738,7 @@ static int __init stallion_module_init(void)
 	stl_init();
 	restore_flags(flags);
 
-	return(0);
+	return 0;
 }
 
 /*****************************************************************************/
@@ -889,7 +889,7 @@ static unsigned long stl_atol(char *str)
 		}
 		val = (val * base) + c;
 	}
-	return(val);
+	return val;
 }
 
 /*****************************************************************************/
@@ -908,7 +908,7 @@ static int stl_parsebrd(stlconf_t *confp, char **argp)
 #endif
 
 	if ((argp[0] == (char *) NULL) || (*argp[0] == 0))
-		return(0);
+		return 0;
 
 	for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++)
 		*sp = TOLOWER(*sp);
@@ -935,7 +935,7 @@ static int stl_parsebrd(stlconf_t *confp, char **argp)
 	}
 	if ((argp[i] != (char *) NULL) && (*argp[i] != 0))
 		confp->irq = stl_atol(argp[i]);
-	return(1);
+	return 1;
 }
 
 /*****************************************************************************/
@@ -946,7 +946,7 @@ static int stl_parsebrd(stlconf_t *confp, char **argp)
 
 static void *stl_memalloc(int len)
 {
-	return((void *) kmalloc(len, GFP_KERNEL));
+	return (void *) kmalloc(len, GFP_KERNEL);
 }
 
 /*****************************************************************************/
@@ -963,12 +963,12 @@ static stlbrd_t *stl_allocbrd(void)
 	if (brdp == (stlbrd_t *) NULL) {
 		printk("STALLION: failed to allocate memory (size=%d)\n",
 			sizeof(stlbrd_t));
-		return((stlbrd_t *) NULL);
+		return (stlbrd_t *) NULL;
 	}
 
 	memset(brdp, 0, sizeof(stlbrd_t));
 	brdp->magic = STL_BOARDMAGIC;
-	return(brdp);
+	return brdp;
 }
 
 /*****************************************************************************/
@@ -988,10 +988,10 @@ static int stl_open(struct tty_struct *tty, struct file *filp)
 	minordev = tty->index;
 	brdnr = MINOR2BRD(minordev);
 	if (brdnr >= stl_nrbrds)
-		return(-ENODEV);
+		return -ENODEV;
 	brdp = stl_brds[brdnr];
 	if (brdp == (stlbrd_t *) NULL)
-		return(-ENODEV);
+		return -ENODEV;
 	minordev = MINOR2PORT(minordev);
 	for (portnr = -1, panelnr = 0; (panelnr < STL_MAXPANELS); panelnr++) {
 		if (brdp->panels[panelnr] == (stlpanel_t *) NULL)
@@ -1003,11 +1003,11 @@ static int stl_open(struct tty_struct *tty, struct file *filp)
 		minordev -= brdp->panels[panelnr]->nrports;
 	}
 	if (portnr < 0)
-		return(-ENODEV);
+		return -ENODEV;
 
 	portp = brdp->panels[panelnr]->ports[portnr];
 	if (portp == (stlport_t *) NULL)
-		return(-ENODEV);
+		return -ENODEV;
 
 /*
  *	On the first open of the device setup the port hardware, and
@@ -1021,7 +1021,7 @@ static int stl_open(struct tty_struct *tty, struct file *filp)
 		if (portp->tx.buf == (char *) NULL) {
 			portp->tx.buf = (char *) stl_memalloc(STL_TXBUFSIZE);
 			if (portp->tx.buf == (char *) NULL)
-				return(-ENOMEM);
+				return -ENOMEM;
 			portp->tx.head = portp->tx.buf;
 			portp->tx.tail = portp->tx.buf;
 		}
@@ -1043,8 +1043,8 @@ static int stl_open(struct tty_struct *tty, struct file *filp)
 	if (portp->flags & ASYNC_CLOSING) {
 		interruptible_sleep_on(&portp->close_wait);
 		if (portp->flags & ASYNC_HUP_NOTIFY)
-			return(-EAGAIN);
-		return(-ERESTARTSYS);
+			return -EAGAIN;
+		return -ERESTARTSYS;
 	}
 
 /*
@@ -1054,11 +1054,11 @@ static int stl_open(struct tty_struct *tty, struct file *filp)
  */
 	if (!(filp->f_flags & O_NONBLOCK)) {
 		if ((rc = stl_waitcarrier(portp, filp)) != 0)
-			return(rc);
+			return rc;
 	}
 	portp->flags |= ASYNC_NORMAL_ACTIVE;
 
-	return(0);
+	return 0;
 }
 
 /*****************************************************************************/
@@ -1115,7 +1115,7 @@ static int stl_waitcarrier(stlport_t *portp, struct file *filp)
 	portp->openwaitcnt--;
 	restore_flags(flags);
 
-	return(rc);
+	return rc;
 }
 
 /*****************************************************************************/
@@ -1211,12 +1211,12 @@ static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count
 
 	if ((tty == (struct tty_struct *) NULL) ||
 	    (stl_tmpwritebuf == (char *) NULL))
-		return(0);
+		return 0;
 	portp = tty->driver_data;
 	if (portp == (stlport_t *) NULL)
-		return(0);
+		return 0;
 	if (portp->tx.buf == (char *) NULL)
-		return(0);
+		return 0;
 
 /*
  *	If copying direct from user space we must cater for page faults,
@@ -1255,7 +1255,7 @@ static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count
 	clear_bit(ASYI_TXLOW, &portp->istate);
 	stl_startrxtx(portp, -1, 1);
 
-	return(count);
+	return count;
 }
 
 /*****************************************************************************/
@@ -1336,16 +1336,16 @@ static int stl_writeroom(struct tty_struct *tty)
 #endif
 
 	if (tty == (struct tty_struct *) NULL)
-		return(0);
+		return 0;
 	portp = tty->driver_data;
 	if (portp == (stlport_t *) NULL)
-		return(0);
+		return 0;
 	if (portp->tx.buf == (char *) NULL)
-		return(0);
+		return 0;
 
 	head = portp->tx.head;
 	tail = portp->tx.tail;
-	return((head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1));
+	return ((head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1));
 }
 
 /*****************************************************************************/
@@ -1370,19 +1370,19 @@ static int stl_charsinbuffer(struct tty_struct *tty)
 #endif
 
 	if (tty == (struct tty_struct *) NULL)
-		return(0);
+		return 0;
 	portp = tty->driver_data;
 	if (portp == (stlport_t *) NULL)
-		return(0);
+		return 0;
 	if (portp->tx.buf == (char *) NULL)
-		return(0);
+		return 0;
 
 	head = portp->tx.head;
 	tail = portp->tx.tail;
 	size = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
 	if ((size == 0) && test_bit(ASYI_TXBUSY, &portp->istate))
 		size = 1;
-	return(size);
+	return size;
 }
 
 /*****************************************************************************/
@@ -1447,7 +1447,7 @@ static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp)
 		    (sio.close_delay != portp->close_delay) ||
 		    ((sio.flags & ~ASYNC_USR_MASK) !=
 		    (portp->flags & ~ASYNC_USR_MASK)))
-			return(-EPERM);
+			return -EPERM;
 	} 
 
 	portp->flags = (portp->flags & ~ASYNC_USR_MASK) |
@@ -1457,7 +1457,7 @@ static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp)
 	portp->closing_wait = sio.closing_wait;
 	portp->custom_divisor = sio.custom_divisor;
 	stl_setport(portp, portp->tty->termios);
-	return(0);
+	return 0;
 }
 
 /*****************************************************************************/
@@ -1467,12 +1467,12 @@ static int stl_tiocmget(struct tty_struct *tty, struct file *file)
 	stlport_t	*portp;
 
 	if (tty == (struct tty_struct *) NULL)
-		return(-ENODEV);
+		return -ENODEV;
 	portp = tty->driver_data;
 	if (portp == (stlport_t *) NULL)
-		return(-ENODEV);
+		return -ENODEV;
 	if (tty->flags & (1 << TTY_IO_ERROR))
-		return(-EIO);
+		return -EIO;
 
 	return stl_getsignals(portp);
 }
@@ -1484,12 +1484,12 @@ static int stl_tiocmset(struct tty_struct *tty, struct file *file,
 	int rts = -1, dtr = -1;
 
 	if (tty == (struct tty_struct *) NULL)
-		return(-ENODEV);
+		return -ENODEV;
 	portp = tty->driver_data;
 	if (portp == (stlport_t *) NULL)
-		return(-ENODEV);
+		return -ENODEV;
 	if (tty->flags & (1 << TTY_IO_ERROR))
-		return(-EIO);
+		return -EIO;
 
 	if (set & TIOCM_RTS)
 		rts = 1;
@@ -1517,15 +1517,15 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
 #endif
 
 	if (tty == (struct tty_struct *) NULL)
-		return(-ENODEV);
+		return -ENODEV;
 	portp = tty->driver_data;
 	if (portp == (stlport_t *) NULL)
-		return(-ENODEV);
+		return -ENODEV;
 
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
  	    (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
-			return(-EIO);
+			return -EIO;
 	}
 
 	rc = 0;
@@ -1566,7 +1566,7 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
 		break;
 	}
 
-	return(rc);
+	return rc;
 }
 
 /*****************************************************************************/
@@ -1872,7 +1872,7 @@ static int stl_portinfo(stlport_t *portp, int portnr, char *pos)
 		pos[(MAXLINE - 2)] = '+';
 	pos[(MAXLINE - 1)] = '\n';
 
-	return(MAXLINE);
+	return MAXLINE;
 }
 
 /*****************************************************************************/
@@ -1957,7 +1957,7 @@ static int stl_readproc(char *page, char **start, off_t off, int count, int *eof
 
 stl_readdone:
 	*start = page;
-	return(pos - page);
+	return (pos - page);
 }
 
 /*****************************************************************************/
@@ -2349,7 +2349,7 @@ static inline int stl_initeio(stlbrd_t *brdp)
 	} else {
 		rc = 0;
 	}
-	return(rc);
+	return rc;
 }
 
 /*****************************************************************************/
@@ -3116,7 +3116,7 @@ static int __init stl_init(void)
 		return -1;
 	}
 
-	return(0);
+	return 0;
 }
 
 /*****************************************************************************/
@@ -3132,7 +3132,7 @@ static int __init stl_init(void)
 static int stl_cd1400getreg(stlport_t *portp, int regnr)
 {
 	outb((regnr + portp->uartaddr), portp->ioaddr);
-	return(inb(portp->ioaddr + EREG_DATA));
+	return inb(portp->ioaddr + EREG_DATA);
 }
 
 static void stl_cd1400setreg(stlport_t *portp, int regnr, int value)
@@ -3146,9 +3146,9 @@ static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value)
 	outb((regnr + portp->uartaddr), portp->ioaddr);
 	if (inb(portp->ioaddr + EREG_DATA) != value) {
 		outb(value, portp->ioaddr + EREG_DATA);
-		return(1);
+		return 1;
 	}
-	return(0);
+	return 0;
 }
 
 /*****************************************************************************/
@@ -3206,7 +3206,7 @@ static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp)
 	}
 
 	BRDDISABLE(panelp->brdnr);
-	return(chipmask);
+	return chipmask;
 }
 
 /*****************************************************************************/
@@ -3557,7 +3557,7 @@ static int stl_cd1400getsignals(stlport_t *portp)
 #else
 	sigs |= TIOCM_DSR;
 #endif
-	return(sigs);
+	return sigs;
 }
 
 /*****************************************************************************/
@@ -3830,9 +3830,9 @@ static int stl_cd1400datastate(stlport_t *portp)
 #endif
 
 	if (portp == (stlport_t *) NULL)
-		return(0);
+		return 0;
 
-	return(test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0);
+	return test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0;
 }
 
 /*****************************************************************************/
@@ -3912,20 +3912,20 @@ static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr)
 		outb((SRER + portp->uartaddr), ioaddr);
 		outb((inb(ioaddr + EREG_DATA) & ~(SRER_TXDATA | SRER_TXEMPTY)),
 			(ioaddr + EREG_DATA));
-		return(1);
+		return 1;
 	} else if (portp->brklen > 1) {
 		outb((TDR + portp->uartaddr), ioaddr);
 		outb(ETC_CMD, (ioaddr + EREG_DATA));
 		outb(ETC_STOPBREAK, (ioaddr + EREG_DATA));
 		portp->brklen = -1;
-		return(1);
+		return 1;
 	} else {
 		outb((COR2 + portp->uartaddr), ioaddr);
 		outb((inb(ioaddr + EREG_DATA) & ~COR2_ETC),
 			(ioaddr + EREG_DATA));
 		portp->brklen = 0;
 	}
-	return(0);
+	return 0;
 }
 
 /*****************************************************************************/
@@ -4166,7 +4166,7 @@ static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr)
 static int stl_sc26198getreg(stlport_t *portp, int regnr)
 {
 	outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
-	return(inb(portp->ioaddr + XP_DATA));
+	return inb(portp->ioaddr + XP_DATA);
 }
 
 static void stl_sc26198setreg(stlport_t *portp, int regnr, int value)
@@ -4180,9 +4180,9 @@ static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value)
 	outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
 	if (inb(portp->ioaddr + XP_DATA) != value) {
 		outb(value, (portp->ioaddr + XP_DATA));
-		return(1);
+		return 1;
 	}
-	return(0);
+	return 0;
 }
 
 /*****************************************************************************/
@@ -4194,7 +4194,7 @@ static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value)
 static int stl_sc26198getglobreg(stlport_t *portp, int regnr)
 {
 	outb(regnr, (portp->ioaddr + XP_ADDR));
-	return(inb(portp->ioaddr + XP_DATA));
+	return inb(portp->ioaddr + XP_DATA);
 }
 
 #if 0
@@ -4252,7 +4252,7 @@ static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp)
 	}
 
 	BRDDISABLE(panelp->brdnr);
-	return(chipmask);
+	return chipmask;
 }
 
 /*****************************************************************************/
@@ -4546,7 +4546,7 @@ static int stl_sc26198getsignals(stlport_t *portp)
 	sigs |= (ipr & IPR_DTR) ? 0: TIOCM_DTR;
 	sigs |= (ipr & IPR_RTS) ? 0: TIOCM_RTS;
 	sigs |= TIOCM_DSR;
-	return(sigs);
+	return sigs;
 }
 
 /*****************************************************************************/
@@ -4828,9 +4828,9 @@ static int stl_sc26198datastate(stlport_t *portp)
 #endif
 
 	if (portp == (stlport_t *) NULL)
-		return(0);
+		return 0;
 	if (test_bit(ASYI_TXBUSY, &portp->istate))
-		return(1);
+		return 1;
 
 	save_flags(flags);
 	cli();
@@ -4839,7 +4839,7 @@ static int stl_sc26198datastate(stlport_t *portp)
 	BRDDISABLE(portp->brdnr);
 	restore_flags(flags);
 
-	return((sr & SR_TXEMPTY) ? 0 : 1);
+	return (sr & SR_TXEMPTY) ? 0 : 1;
 }
 
 /*****************************************************************************/
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 171999e..1421941 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2676,10 +2676,6 @@ config SHAPER
 	  Class-Based Queueing (CBQ) scheduling support which you get if you
 	  say Y to "QoS and/or fair queueing" above.
 
-	  To set up and configure shaper devices, you need the shapecfg
-	  program, available from <ftp://shadow.cabi.net/pub/Linux/> in the
-	  shaper package.
-
 	  To compile this driver as a module, choose M here: the module
 	  will be called shaper.  If unsure, say N.
 
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 2b948ea..40926d7 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -641,7 +641,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/
     spin_lock_irqsave(&sc->lmc_lock, flags);
 
     if(sc->check != 0xBEAFCAFE){
-        printk("LMC: Corrupt net_device stuct, breaking out\n");
+        printk("LMC: Corrupt net_device struct, breaking out\n");
 	spin_unlock_irqrestore(&sc->lmc_lock, flags);
         return;
     }
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index c1a6e69..233a4f6 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -24,10 +24,6 @@ config NET_RADIO
 	  the tools from
 	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 
-	  Some user-level drivers for scarab devices which don't require
-	  special kernel support are available from
-	  <ftp://shadow.cabi.net/pub/Linux/>.
-
 # Note : the cards are obsolete (can't buy them anymore), but the drivers
 # are not, as people are still using them...
 comment "Obsolete Wireless cards support (pre-802.11)"
@@ -160,7 +156,7 @@ config IPW2100
           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
  
           If you want to compile the driver as a module ( = code which can be
-          inserted in and remvoed from the running kernel whenever you want),
+          inserted in and removed from the running kernel whenever you want),
           say M here and read <file:Documentation/modules.txt>.  The module
           will be called ipw2100.ko.
 	
@@ -213,7 +209,7 @@ config IPW2200
           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
  
           If you want to compile the driver as a module ( = code which can be
-          inserted in and remvoed from the running kernel whenever you want),
+          inserted in and removed from the running kernel whenever you want),
           say M here and read <file:Documentation/modules.txt>.  The module
           will be called ipw2200.ko.
 
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 7bdb00b..c065cb8 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -3403,7 +3403,7 @@ zfcp_erp_action_dequeue(struct zfcp_erp_action *erp_action)
 /**
  * zfcp_erp_action_cleanup
  *
- * Register unit with scsi stack if appropiate and fix reference counts.
+ * Register unit with scsi stack if appropriate and fix reference counts.
  * Note: Temporary units are not registered with scsi stack.
  */
 static void
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index 5beed4f..8d64f0b 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -149,7 +149,7 @@ typedef SCCBMGR_INFO *      PSCCBMGR_INFO;
 #define PCI_BUS_CARD          0x03
 #define VESA_BUS_CARD         0x04
 
-/* SCCB struc used for both SCCB and UCB manager compiles! 
+/* SCCB struct used for both SCCB and UCB manager compiles! 
  * The UCB Manager treats the SCCB as it's 'native hardware structure' 
  */
 
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index a6deb01..bd3ffdf 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -328,7 +328,7 @@
  * hdr_channel:x                x - number of virtual bus for host drives
  * shared_access:Y              disable driver reserve/release protocol to 
  *                              access a shared resource from several nodes, 
- *                              appropiate controller firmware required
+ *                              appropriate controller firmware required
  * shared_access:N              enable driver reserve/release protocol
  * probe_eisa_isa:Y             scan for EISA/ISA controllers
  * probe_eisa_isa:N             do not scan for EISA/ISA controllers