summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorAndreas Eversberg <andreas@eversberg.eu>2008-09-28 13:01:01 +0200
committerKarsten Keil <kkeil@suse.de>2009-01-09 22:44:28 +0100
commit87c5fa1bb42624254a2013cbbc3b170d6017f5d6 (patch)
tree49772208b9e511d233e6b715b44fb4062fe1760f /drivers
parent1b36c78f26bfa74c1782be98acb827afa95c3b0c (diff)
downloadop-kernel-dev-87c5fa1bb42624254a2013cbbc3b170d6017f5d6.zip
op-kernel-dev-87c5fa1bb42624254a2013cbbc3b170d6017f5d6.tar.gz
mISDN: Add different different timer settings for hfc-pci
- Poll-timer can now be set from 8 to 256 samples, depending on your kernel. - If default or 128 is used, the normal controller's clock is used as before. Usage: modprobe hfcpci poll=XXX - Added some debug code for dsp buffer size. (CMX_DELAY_DEBUG) Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <kkeil@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/isdn/hardware/mISDN/hfc_pci.h1
-rw-r--r--drivers/isdn/hardware/mISDN/hfcpci.c152
-rw-r--r--drivers/isdn/mISDN/dsp_cmx.c23
3 files changed, 148 insertions, 28 deletions
diff --git a/drivers/isdn/hardware/mISDN/hfc_pci.h b/drivers/isdn/hardware/mISDN/hfc_pci.h
index fd9241a..3132ddc 100644
--- a/drivers/isdn/hardware/mISDN/hfc_pci.h
+++ b/drivers/isdn/hardware/mISDN/hfc_pci.h
@@ -26,7 +26,6 @@
* change mask and threshold simultaneously
*/
#define HFCPCI_BTRANS_THRESHOLD 128
-#define HFCPCI_BTRANS_MAX 256
#define HFCPCI_FILLEMPTY 64
#define HFCPCI_BTRANS_THRESMASK 0x00
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index ea69d58..cd5d26c 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -23,6 +23,25 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
+ * Module options:
+ *
+ * debug:
+ * NOTE: only one poll value must be given for all cards
+ * See hfc_pci.h for debug flags.
+ *
+ * poll:
+ * NOTE: only one poll value must be given for all cards
+ * Give the number of samples for each fifo process.
+ * By default 128 is used. Decrease to reduce delay, increase to
+ * reduce cpu load. If unsure, don't mess with it!
+ * A value of 128 will use controller's interrupt. Other values will
+ * use kernel timer, because the controller will not allow lower values
+ * than 128.
+ * Also note that the value depends on the kernel timer frequency.
+ * If kernel uses a frequency of 1000 Hz, steps of 8 samples are possible.
+ * If the kernel uses 100 Hz, steps of 80 samples are possible.
+ * If the kernel uses 300 Hz, steps of about 26 samples are possible.
+ *
*/
#include <linux/module.h>
@@ -36,10 +55,14 @@ static const char *hfcpci_revision = "2.0";
static int HFC_cnt;
static uint debug;
+static uint poll, tics;
+struct timer_list hfc_tl;
+u32 hfc_jiffies;
MODULE_AUTHOR("Karsten Keil");
MODULE_LICENSE("GPL");
module_param(debug, uint, 0);
+module_param(poll, uint, S_IRUGO | S_IWUSR);
static LIST_HEAD(HFClist);
static DEFINE_RWLOCK(HFClock);
@@ -519,9 +542,9 @@ receive_dmsg(struct hfc_pci *hc)
}
/*
- * check for transparent receive data and read max one threshold size if avail
+ * check for transparent receive data and read max one 'poll' size if avail
*/
-static int
+static void
hfcpci_empty_fifo_trans(struct bchannel *bch, struct bzfifo *bz, u_char *bdata)
{
__le16 *z1r, *z2r;
@@ -533,17 +556,19 @@ hfcpci_empty_fifo_trans(struct bchannel *bch, struct bzfifo *bz, u_char *bdata)
fcnt = le16_to_cpu(*z1r) - le16_to_cpu(*z2r);
if (!fcnt)
- return 0; /* no data avail */
+ return; /* no data avail */
if (fcnt <= 0)
fcnt += B_FIFO_SIZE; /* bytes actually buffered */
- if (fcnt > HFCPCI_BTRANS_THRESHOLD)
- fcnt = HFCPCI_BTRANS_THRESHOLD; /* limit size */
-
new_z2 = le16_to_cpu(*z2r) + fcnt; /* new position in fifo */
if (new_z2 >= (B_FIFO_SIZE + B_SUB_VAL))
new_z2 -= B_FIFO_SIZE; /* buffer wrap */
+ if (fcnt > MAX_DATA_SIZE) { /* flush, if oversized */
+ *z2r = cpu_to_le16(new_z2); /* new position */
+ return;
+ }
+
bch->rx_skb = mI_alloc_skb(fcnt, GFP_ATOMIC);
if (bch->rx_skb) {
ptr = skb_put(bch->rx_skb, fcnt);
@@ -568,7 +593,6 @@ hfcpci_empty_fifo_trans(struct bchannel *bch, struct bzfifo *bz, u_char *bdata)
printk(KERN_WARNING "HFCPCI: receive out of memory\n");
*z2r = cpu_to_le16(new_z2); /* new position */
- return 1;
}
/*
@@ -579,12 +603,11 @@ main_rec_hfcpci(struct bchannel *bch)
{
struct hfc_pci *hc = bch->hw;
int rcnt, real_fifo;
- int receive, count = 5;
+ int receive = 0, count = 5;
struct bzfifo *bz;
u_char *bdata;
struct zt *zp;
-
if ((bch->nr & 2) && (!hc->hw.bswapped)) {
bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b2;
bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.rxdat_b2;
@@ -624,9 +647,10 @@ Begin:
receive = 1;
else
receive = 0;
- } else if (test_bit(FLG_TRANSPARENT, &bch->Flags))
- receive = hfcpci_empty_fifo_trans(bch, bz, bdata);
- else
+ } else if (test_bit(FLG_TRANSPARENT, &bch->Flags)) {
+ hfcpci_empty_fifo_trans(bch, bz, bdata);
+ return;
+ } else
receive = 0;
if (count && receive)
goto Begin;
@@ -782,9 +806,9 @@ hfcpci_fill_fifo(struct bchannel *bch)
next_t_frame:
count = bch->tx_skb->len - bch->tx_idx;
- /* maximum fill shall be HFCPCI_BTRANS_MAX */
- if (count > HFCPCI_BTRANS_MAX - fcnt)
- count = HFCPCI_BTRANS_MAX - fcnt;
+ /* maximum fill shall be poll*2 */
+ if (count > (poll << 1) - fcnt)
+ count = (poll << 1) - fcnt;
if (count <= 0)
return;
/* data is suitable for fifo */
@@ -1164,37 +1188,37 @@ hfcpci_int(int intno, void *dev_id)
val &= ~0x80;
Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt | HFCPCI_CLTIMER);
}
- if (val & 0x08) {
+ if (val & 0x08) { /* B1 rx */
bch = Sel_BCS(hc, hc->hw.bswapped ? 2 : 1);
if (bch)
main_rec_hfcpci(bch);
else if (hc->dch.debug)
printk(KERN_DEBUG "hfcpci spurious 0x08 IRQ\n");
}
- if (val & 0x10) {
+ if (val & 0x10) { /* B2 rx */
bch = Sel_BCS(hc, 2);
if (bch)
main_rec_hfcpci(bch);
else if (hc->dch.debug)
printk(KERN_DEBUG "hfcpci spurious 0x10 IRQ\n");
}
- if (val & 0x01) {
+ if (val & 0x01) { /* B1 tx */
bch = Sel_BCS(hc, hc->hw.bswapped ? 2 : 1);
if (bch)
tx_birq(bch);
else if (hc->dch.debug)
printk(KERN_DEBUG "hfcpci spurious 0x01 IRQ\n");
}
- if (val & 0x02) {
+ if (val & 0x02) { /* B2 tx */
bch = Sel_BCS(hc, 2);
if (bch)
tx_birq(bch);
else if (hc->dch.debug)
printk(KERN_DEBUG "hfcpci spurious 0x02 IRQ\n");
}
- if (val & 0x20)
+ if (val & 0x20) /* D rx */
receive_dmsg(hc);
- if (val & 0x04) { /* dframe transmitted */
+ if (val & 0x04) { /* D tx */
if (test_and_clear_bit(FLG_BUSY_TIMER, &hc->dch.Flags))
del_timer(&hc->dch.timer);
tx_dirq(&hc->dch);
@@ -1203,6 +1227,41 @@ hfcpci_int(int intno, void *dev_id)
return IRQ_HANDLED;
}
+static void
+hfcpci_softirq(void *arg)
+{
+ u_long flags;
+ struct bchannel *bch;
+ struct hfc_pci *hc;
+
+ write_lock_irqsave(&HFClock, flags);
+ list_for_each_entry(hc, &HFClist, list) {
+ if (hc->hw.int_m2 & HFCPCI_IRQ_ENABLE) {
+ spin_lock(&hc->lock);
+ bch = Sel_BCS(hc, hc->hw.bswapped ? 2 : 1);
+ if (bch && bch->state == ISDN_P_B_RAW) { /* B1 rx&tx */
+ main_rec_hfcpci(bch);
+ tx_birq(bch);
+ }
+ bch = Sel_BCS(hc, hc->hw.bswapped ? 1 : 2);
+ if (bch && bch->state == ISDN_P_B_RAW) { /* B2 rx&tx */
+ main_rec_hfcpci(bch);
+ tx_birq(bch);
+ }
+ spin_unlock(&hc->lock);
+ }
+ }
+ write_unlock_irqrestore(&HFClock, flags);
+
+ /* if next event would be in the past ... */
+ if ((s32)(hfc_jiffies + tics - jiffies) <= 0)
+ hfc_jiffies = jiffies + 1;
+ else
+ hfc_jiffies += tics;
+ hfc_tl.expires = hfc_jiffies;
+ add_timer(&hfc_tl);
+}
+
/*
* timer callback for D-chan busy resolution. Currently no function
*/
@@ -1312,14 +1371,16 @@ mode_hfcpci(struct bchannel *bch, int bc, int protocol)
}
if (fifo2 & 2) {
hc->hw.fifo_en |= HFCPCI_FIFOEN_B2;
- hc->hw.int_m1 |= (HFCPCI_INTS_B2TRANS +
- HFCPCI_INTS_B2REC);
+ if (!tics)
+ hc->hw.int_m1 |= (HFCPCI_INTS_B2TRANS +
+ HFCPCI_INTS_B2REC);
hc->hw.ctmt |= 2;
hc->hw.conn &= ~0x18;
} else {
hc->hw.fifo_en |= HFCPCI_FIFOEN_B1;
- hc->hw.int_m1 |= (HFCPCI_INTS_B1TRANS +
- HFCPCI_INTS_B1REC);
+ if (!tics)
+ hc->hw.int_m1 |= (HFCPCI_INTS_B1TRANS +
+ HFCPCI_INTS_B1REC);
hc->hw.ctmt |= 1;
hc->hw.conn &= ~0x03;
}
@@ -1427,7 +1488,8 @@ set_hfcpci_rxtest(struct bchannel *bch, int protocol, int chan)
if (chan & 2) {
hc->hw.sctrl_r |= SCTRL_B2_ENA;
hc->hw.fifo_en |= HFCPCI_FIFOEN_B2RX;
- hc->hw.int_m1 |= HFCPCI_INTS_B2REC;
+ if (!tics)
+ hc->hw.int_m1 |= HFCPCI_INTS_B2REC;
hc->hw.ctmt |= 2;
hc->hw.conn &= ~0x18;
#ifdef REVERSE_BITORDER
@@ -1436,7 +1498,8 @@ set_hfcpci_rxtest(struct bchannel *bch, int protocol, int chan)
} else {
hc->hw.sctrl_r |= SCTRL_B1_ENA;
hc->hw.fifo_en |= HFCPCI_FIFOEN_B1RX;
- hc->hw.int_m1 |= HFCPCI_INTS_B1REC;
+ if (!tics)
+ hc->hw.int_m1 |= HFCPCI_INTS_B1REC;
hc->hw.ctmt |= 1;
hc->hw.conn &= ~0x03;
#ifdef REVERSE_BITORDER
@@ -2273,7 +2336,39 @@ HFC_init(void)
{
int err;
+ if (!poll)
+ poll = HFCPCI_BTRANS_THRESHOLD;
+
+ if (poll != HFCPCI_BTRANS_THRESHOLD) {
+ tics = poll * HZ / 8000;
+ if (tics < 1)
+ tics = 1;
+ poll = tics * 8000 / HZ;
+ if (poll > 256 || poll < 8) {
+ printk(KERN_ERR "%s: Wrong poll value %d not in range "
+ "of 8..256.\n", __func__, poll);
+ err = -EINVAL;
+ return err;
+ }
+ }
+ if (poll != HFCPCI_BTRANS_THRESHOLD) {
+ printk(KERN_INFO "%s: Using alternative poll value of %d\n",
+ __func__, poll);
+ hfc_tl.function = (void *)hfcpci_softirq;
+ hfc_tl.data = 0;
+ init_timer(&hfc_tl);
+ hfc_tl.expires = jiffies + tics;
+ hfc_jiffies = hfc_tl.expires;
+ add_timer(&hfc_tl);
+ } else
+ tics = 0; /* indicate the use of controller's timer */
+
err = pci_register_driver(&hfc_driver);
+ if (err) {
+ if (timer_pending(&hfc_tl))
+ del_timer(&hfc_tl);
+ }
+
return err;
}
@@ -2282,6 +2377,9 @@ HFC_cleanup(void)
{
struct hfc_pci *card, *next;
+ if (timer_pending(&hfc_tl))
+ del_timer(&hfc_tl);
+
list_for_each_entry_safe(card, next, &HFClist, list) {
release_card(card);
}
diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
index efe4c74..02f6434 100644
--- a/drivers/isdn/mISDN/dsp_cmx.c
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -137,6 +137,7 @@
/* #define CMX_CONF_DEBUG */
/*#define CMX_DEBUG * massive read/write pointer output */
+/*#define CMX_DELAY_DEBUG * gives rx-buffer delay overview */
/*#define CMX_TX_DEBUG * massive read/write on tx-buffer with content */
static inline int
@@ -1135,6 +1136,25 @@ dsp_cmx_conf(struct dsp *dsp, u32 conf_id)
return 0;
}
+#ifdef CMX_DELAY_DEBUG
+int delaycount;
+static void
+showdelay(struct dsp *dsp, int samples, int delay)
+{
+ char bar[] = "--------------------------------------------------|";
+ int sdelay;
+
+ delaycount += samples;
+ if (delaycount < 8000)
+ return;
+ delaycount = 0;
+
+ sdelay = delay * 50 / (dsp_poll << 2);
+
+ printk(KERN_DEBUG "DELAY (%s) %3d >%s\n", dsp->name, delay,
+ sdelay > 50 ? "..." : bar + 50 - sdelay);
+}
+#endif
/*
* audio data is received from card
@@ -1256,6 +1276,9 @@ dsp_cmx_receive(struct dsp *dsp, struct sk_buff *skb)
/* increase write-pointer */
dsp->rx_W = ((dsp->rx_W+len) & CMX_BUFF_MASK);
+#ifdef CMX_DELAY_DEBUG
+ showdelay(dsp, len, (dsp->rx_W-dsp->rx_R) & CMX_BUFF_MASK);
+#endif
}
OpenPOWER on IntegriCloud