treewide: fix typo of "suport" in various comments and Kconfig

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 files changed, 12 insertions, 12 deletions

diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index aa34d89..4fbb45f 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Module Name: dsopcode - Dispatcher suport for regions and fields
+ * Module Name: dsopcode - Dispatcher support for regions and fields
  *
  *****************************************************************************/
 
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index f8af2fc..486b1cb 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -244,7 +244,7 @@ struct bonding {
 	struct   delayed_work ad_work;
 	struct   delayed_work mcast_work;
 #ifdef CONFIG_DEBUG_FS
-	/* debugging suport via debugfs */
+	/* debugging support via debugfs */
 	struct	 dentry *debug_dir;
 #endif /* CONFIG_DEBUG_FS */
 };
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index 614981c..a4fb5c0 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -4318,7 +4318,7 @@ static int bnx2x_queue_comp_cmd(struct bnx2x *bp,
 
 	if (o->next_tx_only >= o->max_cos)
 		/* >= becuase tx only must always be smaller than cos since the
-		 * primary connection suports COS 0
+		 * primary connection supports COS 0
 		 */
 		BNX2X_ERR("illegal value for next tx_only: %d. max cos was %d",
 			   o->next_tx_only, o->max_cos);
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index 318fee9..693a88d 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -6767,7 +6767,7 @@ static int stp;
 /*
  * This enables fast aging in the KSZ8842 switch.  Not sure what situation
  * needs that.  However, fast aging is used to flush the dynamic MAC table when
- * STP suport is enabled.
+ * STP support is enabled.
  */
 static int fast_aging;
 
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 4a4e98f..4374079 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -2963,7 +2963,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc)
 	ssid_el_p[1] = priv->SSID_size;
 	memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
 	ssid_el_p[2 + priv->SSID_size] = WLAN_EID_SUPP_RATES;
-	ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */
+	ssid_el_p[3 + priv->SSID_size] = 4; /* len of supported rates */
 	memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
 
 	atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.h b/drivers/net/wireless/ipw2x00/ipw2100.h
index 9731252..5fe17cb 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.h
+++ b/drivers/net/wireless/ipw2x00/ipw2100.h
@@ -1045,7 +1045,7 @@ typedef enum _ORDINAL_TABLE_1 {	// NS - means Not Supported by FW
 	IPW_ORD_POWER_MGMT_MODE,	// Power mode - 0=CAM, 1=PSP
 	IPW_ORD_POWER_MGMT_INDEX,	//NS //
 	IPW_ORD_COUNTRY_CODE,	// IEEE country code as recv'd from beacon
-	IPW_ORD_COUNTRY_CHANNELS,	// channels suported by country
+	IPW_ORD_COUNTRY_CHANNELS,	// channels supported by country
 // IPW_ORD_COUNTRY_CHANNELS:
 // For 11b the lower 2-byte are used for channels from 1-14
 //   and the higher 2-byte are not used.
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 07aee69..08fec06 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -773,7 +773,7 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 		/*
 		 * read and store the RANGE bit for later use
 		 * This must be done before regulator is probed otherwise
-		 * we error in probe with unsuportable ranges.
+		 * we error in probe with unsupportable ranges.
 		 */
 		if (id != PALMAS_REG_SMPS10) {
 			addr = palmas_regs_info[id].vsel_addr;
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index efc6e72..aec2e0d 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1800,7 +1800,7 @@ out:
  * @dev:domain device to be detect.
  * @src_dev: the device which originated BROADCAST(CHANGE).
  *
- * Add self-configuration expander suport. Suppose two expander cascading,
+ * Add self-configuration expander support. Suppose two expander cascading,
  * when the first level expander is self-configuring, hotplug the disks in
  * second level expander, BROADCAST(CHANGE) will not only be originated
  * in the second level expander, but also be originated in the first level
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index b536bba..c484a73 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -73,7 +73,7 @@ sampling rate. If you sample two channels you get 4kHz and so on.
  *       And loads of cleaning up, in particular streamlining the
  *       bulk transfers.
  * 1.1:  moved EP4 transfers to EP1 to make space for a PWM output on EP4
- * 1.2:  added PWM suport via EP4
+ * 1.2:  added PWM support via EP4
  * 2.0:  PWM seems to be stable and is not interfering with the other functions
  * 2.1:  changed PWM API
  * 2.2:  added firmware kernel request to fix an udev problem
diff --git a/drivers/staging/csr/netdev.c b/drivers/staging/csr/netdev.c
index 9a52ab4..fc43cc2 100644
--- a/drivers/staging/csr/netdev.c
+++ b/drivers/staging/csr/netdev.c
@@ -55,7 +55,7 @@
 #include <net/pkt_sched.h>
 
 
-/* Wext handler is suported only if CSR_SUPPORT_WEXT is defined */
+/* Wext handler is supported only if CSR_SUPPORT_WEXT is defined */
 #ifdef CSR_SUPPORT_WEXT
 extern struct iw_handler_def unifi_iw_handler_def;
 #endif /* CSR_SUPPORT_WEXT */
diff --git a/drivers/staging/tidspbridge/rmgr/node.c b/drivers/staging/tidspbridge/rmgr/node.c
index 294e9b4..737f4a9 100644
--- a/drivers/staging/tidspbridge/rmgr/node.c
+++ b/drivers/staging/tidspbridge/rmgr/node.c
@@ -736,7 +736,7 @@ DBAPI node_alloc_msg_buf(struct node_object *hnode, u32 usize,
 		case 4:
 			break;
 		default:
-			/* alignment value not suportted */
+			/* alignment value not supportted */
 			status = -EPERM;
 			break;
 		}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 6056db7..263c503 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -238,7 +238,7 @@ static int usb_probe_device(struct device *dev)
 	/* TODO: Add real matching code */
 
 	/* The device should always appear to be in use
-	 * unless the driver suports autosuspend.
+	 * unless the driver supports autosuspend.
 	 */
 	if (!udriver->supports_autosuspend)
 		error = usb_autoresume_device(udev);