Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits)
  MIPS: Alchemy: defconfig updates
  MIPS: Alchemy: Fix Au1100 ethernet build failure
  MIPS: Alchemy: Repair db1500/bosporus builds
  MIPS: ARC: Cleanup unused definitions from sgialib.h
  MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses
  MIPS: Alchemy: use 36bit addresses for PCMCIA resources.
  MIPS: Cobalt: Fix theoretical port aliasing issue
  MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1)
  MIPS: Crazy spinlock speed test.
  MIPS: Optimize spinlocks.
  MIPS: Alchemy: devboard PM needs to save CPLD registers.
  MIPS: PowerTV: Eliminate duplicate opcode definition macros
  MIPS: Lemote 2F: Move printks out of port_access_lock.
  MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks.
  MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c.
  MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks.
  MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock.
  MIPS: Loongson: Remove pointless sample_lock from oprofile code.
  MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock.
  MIPS: i8259: Convert IRQ controller lock to raw spinlock.
  ...

47 files changed, 2682 insertions, 1959 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5f318ce..737f052 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -564,6 +564,16 @@ config I2C_VERSATILE
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-versatile.
 
+config I2C_OCTEON
+	tristate "Cavium OCTEON I2C bus support"
+	depends on CPU_CAVIUM_OCTEON
+	help
+	  Say yes if you want to support the I2C serial bus on Cavium
+	  OCTEON SOC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-octeon.
+
 comment "External I2C/SMBus adapter drivers"
 
 config I2C_PARPORT
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 302c551..c2c4ea1 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_I2C_SH_MOBILE)	+= i2c-sh_mobile.o
 obj-$(CONFIG_I2C_SIMTEC)	+= i2c-simtec.o
 obj-$(CONFIG_I2C_STU300)	+= i2c-stu300.o
 obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
+obj-$(CONFIG_I2C_OCTEON)	+= i2c-octeon.o
 
 # External I2C/SMBus adapter drivers
 obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
new file mode 100644
index 0000000..6037550
--- /dev/null
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -0,0 +1,651 @@
+/*
+ * (C) Copyright 2009-2010
+ * Nokia Siemens Networks, michael.lawnick.ext@nsn.com
+ *
+ * Portions Copyright (C) 2010 Cavium Networks, Inc.
+ *
+ * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <asm/octeon/octeon.h>
+
+#define DRV_NAME "i2c-octeon"
+
+/* The previous out-of-tree version was implicitly version 1.0. */
+#define DRV_VERSION	"2.0"
+
+/* register offsets */
+#define SW_TWSI	 0x00
+#define TWSI_INT 0x10
+
+/* Controller command patterns */
+#define SW_TWSI_V               0x8000000000000000ull
+#define SW_TWSI_EOP_TWSI_DATA   0x0C00000100000000ull
+#define SW_TWSI_EOP_TWSI_CTL    0x0C00000200000000ull
+#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ull
+#define SW_TWSI_EOP_TWSI_STAT   0x0C00000300000000ull
+#define SW_TWSI_EOP_TWSI_RST    0x0C00000700000000ull
+#define SW_TWSI_OP_TWSI_CLK     0x0800000000000000ull
+#define SW_TWSI_R               0x0100000000000000ull
+
+/* Controller command and status bits */
+#define TWSI_CTL_CE   0x80
+#define TWSI_CTL_ENAB 0x40
+#define TWSI_CTL_STA  0x20
+#define TWSI_CTL_STP  0x10
+#define TWSI_CTL_IFLG 0x08
+#define TWSI_CTL_AAK  0x04
+
+/* Some status values */
+#define STAT_START      0x08
+#define STAT_RSTART     0x10
+#define STAT_TXADDR_ACK 0x18
+#define STAT_TXDATA_ACK 0x28
+#define STAT_RXADDR_ACK 0x40
+#define STAT_RXDATA_ACK 0x50
+#define STAT_IDLE       0xF8
+
+struct octeon_i2c {
+	wait_queue_head_t queue;
+	struct i2c_adapter adap;
+	int irq;
+	int twsi_freq;
+	int sys_freq;
+	resource_size_t twsi_phys;
+	void __iomem *twsi_base;
+	resource_size_t regsize;
+	struct device *dev;
+};
+
+/**
+ * octeon_i2c_write_sw - write an I2C core register.
+ * @i2c: The struct octeon_i2c.
+ * @eop_reg: Register selector.
+ * @data: Value to be written.
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static void octeon_i2c_write_sw(struct octeon_i2c *i2c,
+				u64 eop_reg,
+				u8 data)
+{
+	u64 tmp;
+
+	__raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI);
+	do {
+		tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
+	} while ((tmp & SW_TWSI_V) != 0);
+}
+
+/**
+ * octeon_i2c_read_sw - write an I2C core register.
+ * @i2c: The struct octeon_i2c.
+ * @eop_reg: Register selector.
+ *
+ * Returns the data.
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
+{
+	u64 tmp;
+
+	__raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI);
+	do {
+		tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
+	} while ((tmp & SW_TWSI_V) != 0);
+
+	return tmp & 0xFF;
+}
+
+/**
+ * octeon_i2c_write_int - write the TWSI_INT register
+ * @i2c: The struct octeon_i2c.
+ * @data: Value to be written.
+ */
+static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
+{
+	u64 tmp;
+
+	__raw_writeq(data, i2c->twsi_base + TWSI_INT);
+	tmp = __raw_readq(i2c->twsi_base + TWSI_INT);
+}
+
+/**
+ * octeon_i2c_int_enable - enable the TS interrupt.
+ * @i2c: The struct octeon_i2c.
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_write_int(i2c, 0x40);
+}
+
+/**
+ * octeon_i2c_int_disable - disable the TS interrupt.
+ * @i2c: The struct octeon_i2c.
+ */
+static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_write_int(i2c, 0);
+}
+
+/**
+ * octeon_i2c_unblock - unblock the bus.
+ * @i2c: The struct octeon_i2c.
+ *
+ * If there was a reset while a device was driving 0 to bus,
+ * bus is blocked. We toggle it free manually by some clock
+ * cycles and send a stop.
+ */
+static void octeon_i2c_unblock(struct octeon_i2c *i2c)
+{
+	int i;
+
+	dev_dbg(i2c->dev, "%s\n", __func__);
+	for (i = 0; i < 9; i++) {
+		octeon_i2c_write_int(i2c, 0x0);
+		udelay(5);
+		octeon_i2c_write_int(i2c, 0x200);
+		udelay(5);
+	}
+	octeon_i2c_write_int(i2c, 0x300);
+	udelay(5);
+	octeon_i2c_write_int(i2c, 0x100);
+	udelay(5);
+	octeon_i2c_write_int(i2c, 0x0);
+}
+
+/**
+ * octeon_i2c_isr - the interrupt service routine.
+ * @int: The irq, unused.
+ * @dev_id: Our struct octeon_i2c.
+ */
+static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
+{
+	struct octeon_i2c *i2c = dev_id;
+
+	octeon_i2c_int_disable(i2c);
+	wake_up_interruptible(&i2c->queue);
+
+	return IRQ_HANDLED;
+}
+
+
+static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
+{
+	return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL) & TWSI_CTL_IFLG) != 0;
+}
+
+/**
+ * octeon_i2c_wait - wait for the IFLG to be set.
+ * @i2c: The struct octeon_i2c.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_wait(struct octeon_i2c *i2c)
+{
+	int result;
+
+	octeon_i2c_int_enable(i2c);
+
+	result = wait_event_interruptible_timeout(i2c->queue,
+						  octeon_i2c_test_iflg(i2c),
+						  i2c->adap.timeout);
+
+	octeon_i2c_int_disable(i2c);
+
+	if (result < 0) {
+		dev_dbg(i2c->dev, "%s: wait interrupted\n", __func__);
+		return result;
+	} else if (result == 0) {
+		dev_dbg(i2c->dev, "%s: timeout\n", __func__);
+		result = -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+/**
+ * octeon_i2c_start - send START to the bus.
+ * @i2c: The struct octeon_i2c.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_start(struct octeon_i2c *i2c)
+{
+	u8 data;
+	int result;
+
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+				TWSI_CTL_ENAB | TWSI_CTL_STA);
+
+	result = octeon_i2c_wait(i2c);
+	if (result) {
+		if (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT) == STAT_IDLE) {
+			/*
+			 * Controller refused to send start flag May
+			 * be a client is holding SDA low - let's try
+			 * to free it.
+			 */
+			octeon_i2c_unblock(i2c);
+			octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+					    TWSI_CTL_ENAB | TWSI_CTL_STA);
+
+			result = octeon_i2c_wait(i2c);
+		}
+		if (result)
+			return result;
+	}
+
+	data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+	if ((data != STAT_START) && (data != STAT_RSTART)) {
+		dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * octeon_i2c_stop - send STOP to the bus.
+ * @i2c: The struct octeon_i2c.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_stop(struct octeon_i2c *i2c)
+{
+	u8 data;
+
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+			    TWSI_CTL_ENAB | TWSI_CTL_STP);
+
+	data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+
+	if (data != STAT_IDLE) {
+		dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data);
+		return -EIO;
+	}
+	return 0;
+}
+
+/**
+ * octeon_i2c_write - send data to the bus.
+ * @i2c: The struct octeon_i2c.
+ * @target: Target address.
+ * @data: Pointer to the data to be sent.
+ * @length: Length of the data.
+ *
+ * The address is sent over the bus, then the data.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
+			    const u8 *data, int length)
+{
+	int i, result;
+	u8 tmp;
+
+	result = octeon_i2c_start(i2c);
+	if (result)
+		return result;
+
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, target << 1);
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+	result = octeon_i2c_wait(i2c);
+	if (result)
+		return result;
+
+	for (i = 0; i < length; i++) {
+		tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+		if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) {
+			dev_err(i2c->dev,
+				"%s: bad status before write (0x%x)\n",
+				__func__, tmp);
+			return -EIO;
+		}
+
+		octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]);
+		octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+		result = octeon_i2c_wait(i2c);
+		if (result)
+			return result;
+	}
+
+	return 0;
+}
+
+/**
+ * octeon_i2c_read - receive data from the bus.
+ * @i2c: The struct octeon_i2c.
+ * @target: Target address.
+ * @data: Pointer to the location to store the datae .
+ * @length: Length of the data.
+ *
+ * The address is sent over the bus, then the data is read.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
+			   u8 *data, int length)
+{
+	int i, result;
+	u8 tmp;
+
+	if (length < 1)
+		return -EINVAL;
+
+	result = octeon_i2c_start(i2c);
+	if (result)
+		return result;
+
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1);
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+	result = octeon_i2c_wait(i2c);
+	if (result)
+		return result;
+
+	for (i = 0; i < length; i++) {
+		tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+		if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) {
+			dev_err(i2c->dev,
+				"%s: bad status before read (0x%x)\n",
+				__func__, tmp);
+			return -EIO;
+		}
+
+		if (i+1 < length)
+			octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+						TWSI_CTL_ENAB | TWSI_CTL_AAK);
+		else
+			octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+						TWSI_CTL_ENAB);
+
+		result = octeon_i2c_wait(i2c);
+		if (result)
+			return result;
+
+		data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA);
+	}
+	return 0;
+}
+
+/**
+ * octeon_i2c_xfer - The driver's master_xfer function.
+ * @adap: Pointer to the i2c_adapter structure.
+ * @msgs: Pointer to the messages to be processed.
+ * @num: Length of the MSGS array.
+ *
+ * Returns the number of messages processed, or a negative errno on
+ * failure.
+ */
+static int octeon_i2c_xfer(struct i2c_adapter *adap,
+			   struct i2c_msg *msgs,
+			   int num)
+{
+	struct i2c_msg *pmsg;
+	int i;
+	int ret = 0;
+	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+
+	for (i = 0; ret == 0 && i < num; i++) {
+		pmsg = &msgs[i];
+		dev_dbg(i2c->dev,
+			"Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n",
+			 pmsg->flags & I2C_M_RD ? "read" : "write",
+			 pmsg->len, pmsg->addr, i + 1, num);
+		if (pmsg->flags & I2C_M_RD)
+			ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
+						pmsg->len);
+		else
+			ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
+						pmsg->len);
+	}
+	octeon_i2c_stop(i2c);
+
+	return (ret != 0) ? ret : num;
+}
+
+static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm octeon_i2c_algo = {
+	.master_xfer = octeon_i2c_xfer,
+	.functionality = octeon_i2c_functionality,
+};
+
+static struct i2c_adapter octeon_i2c_ops = {
+	.owner = THIS_MODULE,
+	.name = "OCTEON adapter",
+	.algo = &octeon_i2c_algo,
+	.timeout = 2,
+};
+
+/**
+ * octeon_i2c_setclock - Calculate and set clock divisors.
+ */
+static int __init octeon_i2c_setclock(struct octeon_i2c *i2c)
+{
+	int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
+	int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
+
+	for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
+		/*
+		 * An mdiv value of less than 2 seems to not work well
+		 * with ds1337 RTCs, so we constrain it to larger
+		 * values.
+		 */
+		for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
+			/*
+			 * For given ndiv and mdiv values check the
+			 * two closest thp values.
+			 */
+			tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
+			tclk *= (1 << ndiv_idx);
+			thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+			for (inc = 0; inc <= 1; inc++) {
+				thp_idx = thp_base + inc;
+				if (thp_idx < 5 || thp_idx > 0xff)
+					continue;
+
+				foscl = i2c->sys_freq / (2 * (thp_idx + 1));
+				foscl = foscl / (1 << ndiv_idx);
+				foscl = foscl / (mdiv_idx + 1) / 10;
+				diff = abs(foscl - i2c->twsi_freq);
+				if (diff < delta_hz) {
+					delta_hz = diff;
+					thp = thp_idx;
+					mdiv = mdiv_idx;
+					ndiv = ndiv_idx;
+				}
+			}
+		}
+	}
+	octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp);
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
+
+	return 0;
+}
+
+static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
+{
+	u8 status;
+	int tries;
+
+	/* disable high level controller, enable bus access */
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+	/* reset controller */
+	octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
+
+	for (tries = 10; tries; tries--) {
+		udelay(1);
+		status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+		if (status == STAT_IDLE)
+			return 0;
+	}
+	dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status);
+	return -EIO;
+}
+
+static int __devinit octeon_i2c_probe(struct platform_device *pdev)
+{
+	int irq, result = 0;
+	struct octeon_i2c *i2c;
+	struct octeon_i2c_data *i2c_data;
+	struct resource *res_mem;
+
+	/* All adaptors have an irq.  */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+	if (!i2c) {
+		dev_err(&pdev->dev, "kzalloc failed\n");
+		result = -ENOMEM;
+		goto out;
+	}
+	i2c->dev = &pdev->dev;
+	i2c_data = pdev->dev.platform_data;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (res_mem == NULL) {
+		dev_err(i2c->dev, "found no memory resource\n");
+		result = -ENXIO;
+		goto fail_region;
+	}
+
+	if (i2c_data == NULL) {
+		dev_err(i2c->dev, "no I2C frequency data\n");
+		result = -ENXIO;
+		goto fail_region;
+	}
+
+	i2c->twsi_phys = res_mem->start;
+	i2c->regsize = resource_size(res_mem);
+	i2c->twsi_freq = i2c_data->i2c_freq;
+	i2c->sys_freq = i2c_data->sys_freq;
+
+	if (!request_mem_region(i2c->twsi_phys, i2c->regsize, res_mem->name)) {
+		dev_err(i2c->dev, "request_mem_region failed\n");
+		goto fail_region;
+	}
+	i2c->twsi_base = ioremap(i2c->twsi_phys, i2c->regsize);
+
+	init_waitqueue_head(&i2c->queue);
+
+	i2c->irq = irq;
+
+	result = request_irq(i2c->irq, octeon_i2c_isr, 0, DRV_NAME, i2c);
+	if (result < 0) {
+		dev_err(i2c->dev, "failed to attach interrupt\n");
+		goto fail_irq;
+	}
+
+	result = octeon_i2c_initlowlevel(i2c);
+	if (result) {
+		dev_err(i2c->dev, "init low level failed\n");
+		goto  fail_add;
+	}
+
+	result = octeon_i2c_setclock(i2c);
+	if (result) {
+		dev_err(i2c->dev, "clock init failed\n");
+		goto  fail_add;
+	}
+
+	i2c->adap = octeon_i2c_ops;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	platform_set_drvdata(pdev, i2c);
+
+	result = i2c_add_numbered_adapter(&i2c->adap);
+	if (result < 0) {
+		dev_err(i2c->dev, "failed to add adapter\n");
+		goto fail_add;
+	}
+
+	dev_info(i2c->dev, "version %s\n", DRV_VERSION);
+
+	return result;
+
+fail_add:
+	platform_set_drvdata(pdev, NULL);
+	free_irq(i2c->irq, i2c);
+fail_irq:
+	iounmap(i2c->twsi_base);
+	release_mem_region(i2c->twsi_phys, i2c->regsize);
+fail_region:
+	kfree(i2c);
+out:
+	return result;
+};
+
+static int __devexit octeon_i2c_remove(struct platform_device *pdev)
+{
+	struct octeon_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	platform_set_drvdata(pdev, NULL);
+	free_irq(i2c->irq, i2c);
+	iounmap(i2c->twsi_base);
+	release_mem_region(i2c->twsi_phys, i2c->regsize);
+	kfree(i2c);
+	return 0;
+};
+
+static struct platform_driver octeon_i2c_driver = {
+	.probe		= octeon_i2c_probe,
+	.remove		= __devexit_p(octeon_i2c_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init octeon_i2c_init(void)
+{
+	int rv;
+
+	rv = platform_driver_register(&octeon_i2c_driver);
+	return rv;
+}
+
+static void __exit octeon_i2c_exit(void)
+{
+	platform_driver_unregister(&octeon_i2c_driver);
+}
+
+MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(octeon_i2c_init);
+module_exit(octeon_i2c_exit);
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index 87cef0c..349a67b 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -56,8 +56,8 @@ static inline void auide_insw(unsigned long port, void *addr, u32 count)
 	chan_tab_t *ctp;
 	au1x_ddma_desc_t *dp;
 
-	if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, 
-			   DDMA_FLAGS_NOIE)) {
+	if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, virt_to_phys(addr),
+				   count << 1, DDMA_FLAGS_NOIE)) {
 		printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
 		return;
 	}
@@ -74,8 +74,8 @@ static inline void auide_outsw(unsigned long port, void *addr, u32 count)
 	chan_tab_t *ctp;
 	au1x_ddma_desc_t *dp;
 
-	if(!put_source_flags(ahwif->tx_chan, (void*)addr,
-			     count << 1, DDMA_FLAGS_NOIE)) {
+	if (!au1xxx_dbdma_put_source(ahwif->tx_chan, virt_to_phys(addr),
+				     count << 1, DDMA_FLAGS_NOIE)) {
 		printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
 		return;
 	}
@@ -246,17 +246,14 @@ static int auide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 				flags = DDMA_FLAGS_NOIE;
 
 			if (iswrite) {
-				if(!put_source_flags(ahwif->tx_chan, 
-						     (void*) sg_virt(sg),
-						     tc, flags)) { 
+				if (!au1xxx_dbdma_put_source(ahwif->tx_chan,
+					sg_phys(sg), tc, flags)) {
 					printk(KERN_ERR "%s failed %d\n", 
 					       __func__, __LINE__);
 				}
-			} else 
-			{
-				if(!put_dest_flags(ahwif->rx_chan, 
-						   (void*) sg_virt(sg),
-						   tc, flags)) { 
+			} else  {
+				if (!au1xxx_dbdma_put_dest(ahwif->rx_chan,
+					sg_phys(sg), tc, flags)) {
 					printk(KERN_ERR "%s failed %d\n", 
 					       __func__, __LINE__);
 				}
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index d3f5561..57b2119 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -650,11 +650,11 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host,
 				flags = DDMA_FLAGS_IE;
 
 			if (host->flags & HOST_F_XMIT) {
-				ret = au1xxx_dbdma_put_source_flags(channel,
-					(void *)sg_virt(sg), len, flags);
+				ret = au1xxx_dbdma_put_source(channel,
+					sg_phys(sg), len, flags);
 			} else {
-				ret = au1xxx_dbdma_put_dest_flags(channel,
-					(void *)sg_virt(sg), len, flags);
+				ret = au1xxx_dbdma_put_dest(channel,
+					sg_phys(sg), len, flags);
 			}
 
 			if (!ret)
@@ -1017,6 +1017,10 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
 	} else
 		mmc->caps |= MMC_CAP_NEEDS_POLL;
 
+	/* platform may not be able to use all advertised caps */
+	if (host->platdata)
+		mmc->caps &= ~(host->platdata->mask_host_caps);
+
 	tasklet_init(&host->data_task, au1xmmc_tasklet_data,
 			(unsigned long)host);
 
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 2de0cc8..2bb03a8 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -251,12 +251,6 @@ config MTD_NETtel
 	help
 	  Support for flash chips on NETtel/SecureEdge/SnapGear boards.
 
-config MTD_ALCHEMY
-	tristate "AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support"
-	depends on SOC_AU1X00 && MTD_PARTITIONS && MTD_CFI
-	help
-	  Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
-
 config MTD_DILNETPC
 	tristate "CFI Flash device mapped on DIL/Net PC"
 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index ce31521..a44919f 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -40,7 +40,6 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
 obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
 obj-$(CONFIG_MTD_PCI)		+= pci.o
-obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
 obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
 obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
 obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c
deleted file mode 100644
index 845ad4f..0000000
--- a/drivers/mtd/maps/alchemy-flash.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Flash memory access on AMD Alchemy evaluation boards
- *
- * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#ifdef CONFIG_MIPS_PB1000
-#define BOARD_MAP_NAME "Pb1000 Flash"
-#define BOARD_FLASH_SIZE 0x00800000 /* 8MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1500
-#define BOARD_MAP_NAME "Pb1500 Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1100
-#define BOARD_MAP_NAME "Pb1100 Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1550
-#define BOARD_MAP_NAME "Pb1550 Flash"
-#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1200
-#define BOARD_MAP_NAME "Pb1200 Flash"
-#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
-#define BOARD_FLASH_WIDTH 2 /* 16-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1000
-#define BOARD_MAP_NAME "Db1000 Flash"
-#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1500
-#define BOARD_MAP_NAME "Db1500 Flash"
-#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1100
-#define BOARD_MAP_NAME "Db1100 Flash"
-#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-#define BOARD_MAP_NAME "Db1550 Flash"
-#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#define BOARD_MAP_NAME "Db1200 Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 2 /* 16-bits */
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-#define BOARD_MAP_NAME "Bosporus Flash"
-#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */
-#define BOARD_FLASH_WIDTH 2 /* 16-bits */
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-#define BOARD_MAP_NAME "Mirage Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#define USE_LOCAL_ACCESSORS /* why? */
-#endif
-
-static struct map_info alchemy_map = {
-	.name =	BOARD_MAP_NAME,
-};
-
-static struct mtd_partition alchemy_partitions[] = {
-        {
-                .name = "User FS",
-                .size = BOARD_FLASH_SIZE - 0x00400000,
-                .offset = 0x0000000
-        },{
-                .name = "YAMON",
-                .size = 0x0100000,
-		.offset = MTDPART_OFS_APPEND,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "raw kernel",
-		.size = (0x300000 - 0x40000), /* last 256KB is yamon env */
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-
-static struct mtd_info *mymtd;
-
-static int __init alchemy_mtd_init(void)
-{
-	struct mtd_partition *parts;
-	int nb_parts = 0;
-	unsigned long window_addr;
-	unsigned long window_size;
-
-	/* Default flash buswidth */
-	alchemy_map.bankwidth = BOARD_FLASH_WIDTH;
-
-	window_addr = 0x20000000 - BOARD_FLASH_SIZE;
-	window_size = BOARD_FLASH_SIZE;
-
-	/*
-	 * Static partition definition selection
-	 */
-	parts = alchemy_partitions;
-	nb_parts = ARRAY_SIZE(alchemy_partitions);
-	alchemy_map.size = window_size;
-
-	/*
-	 * Now let's probe for the actual flash.  Do it here since
-	 * specific machine settings might have been set above.
-	 */
-	printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n",
-			alchemy_map.bankwidth*8);
-	alchemy_map.virt = ioremap(window_addr, window_size);
-	mymtd = do_map_probe("cfi_probe", &alchemy_map);
-	if (!mymtd) {
-		iounmap(alchemy_map.virt);
-		return -ENXIO;
-	}
-	mymtd->owner = THIS_MODULE;
-
-	add_mtd_partitions(mymtd, parts, nb_parts);
-	return 0;
-}
-
-static void __exit alchemy_mtd_cleanup(void)
-{
-	if (mymtd) {
-		del_mtd_partitions(mymtd);
-		map_destroy(mymtd);
-		iounmap(alchemy_map.virt);
-	}
-}
-
-module_init(alchemy_mtd_init);
-module_exit(alchemy_mtd_cleanup);
-
-MODULE_AUTHOR("Embedded Alley Solutions, Inc");
-MODULE_DESCRIPTION(BOARD_MAP_NAME " MTD driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 92c334f..43d46e4 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -19,6 +19,7 @@
 #include <asm/io.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 /*
  * MTD structure for NAND controller
@@ -475,7 +476,8 @@ static int __init au1xxx_nand_init(void)
 	/* set gpio206 high */
 	au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
 
-	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr->status >> 6) & 0x1);
+	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
+
 	switch (boot_swapboot) {
 	case 0:
 	case 2:
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 6bac046..6e5a68e 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -55,6 +55,7 @@
 #include <linux/delay.h>
 #include <linux/crc32.h>
 #include <linux/phy.h>
+#include <linux/platform_device.h>
 
 #include <asm/cpu.h>
 #include <asm/mipsregs.h>
@@ -63,6 +64,7 @@
 #include <asm/processor.h>
 
 #include <au1000.h>
+#include <au1xxx_eth.h>
 #include <prom.h>
 
 #include "au1000_eth.h"
@@ -112,15 +114,15 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES];
  *
  * PHY detection algorithm
  *
- * If AU1XXX_PHY_STATIC_CONFIG is undefined, the PHY setup is
+ * If phy_static_config is undefined, the PHY setup is
  * autodetected:
  *
  * mii_probe() first searches the current MAC's MII bus for a PHY,
- * selecting the first (or last, if AU1XXX_PHY_SEARCH_HIGHEST_ADDR is
+ * selecting the first (or last, if phy_search_highest_addr is
  * defined) PHY address not already claimed by another netdev.
  *
  * If nothing was found that way when searching for the 2nd ethernet
- * controller's PHY and AU1XXX_PHY1_SEARCH_ON_MAC0 is defined, then
+ * controller's PHY and phy1_search_mac0 is defined, then
  * the first MII bus is searched as well for an unclaimed PHY; this is
  * needed in case of a dual-PHY accessible only through the MAC0's MII
  * bus.
@@ -129,9 +131,7 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES];
  * controller is not registered to the network subsystem.
  */
 
-/* autodetection defaults */
-#undef  AU1XXX_PHY_SEARCH_HIGHEST_ADDR
-#define AU1XXX_PHY1_SEARCH_ON_MAC0
+/* autodetection defaults: phy1_search_mac0 */
 
 /* static PHY setup
  *
@@ -148,29 +148,6 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES];
  * specific irq-map
  */
 
-#if defined(CONFIG_MIPS_BOSPORUS)
-/*
- * Micrel/Kendin 5 port switch attached to MAC0,
- * MAC0 is associated with PHY address 5 (== WAN port)
- * MAC1 is not associated with any PHY, since it's connected directly
- * to the switch.
- * no interrupts are used
- */
-# define AU1XXX_PHY_STATIC_CONFIG
-
-# define AU1XXX_PHY0_ADDR  5
-# define AU1XXX_PHY0_BUSID 0
-#  undef AU1XXX_PHY0_IRQ
-
-#  undef AU1XXX_PHY1_ADDR
-#  undef AU1XXX_PHY1_BUSID
-#  undef AU1XXX_PHY1_IRQ
-#endif
-
-#if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0)
-# error MAC0-associated PHY attached 2nd MACs MII bus not supported yet
-#endif
-
 static void enable_mac(struct net_device *dev, int force_reset)
 {
 	unsigned long flags;
@@ -390,67 +367,55 @@ static int mii_probe (struct net_device *dev)
 	struct au1000_private *const aup = netdev_priv(dev);
 	struct phy_device *phydev = NULL;
 
-#if defined(AU1XXX_PHY_STATIC_CONFIG)
-	BUG_ON(aup->mac_id < 0 || aup->mac_id > 1);
+	if (aup->phy_static_config) {
+		BUG_ON(aup->mac_id < 0 || aup->mac_id > 1);
 
-	if(aup->mac_id == 0) { /* get PHY0 */
-# if defined(AU1XXX_PHY0_ADDR)
-		phydev = au_macs[AU1XXX_PHY0_BUSID]->mii_bus->phy_map[AU1XXX_PHY0_ADDR];
-# else
-		printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
-			dev->name);
-		return 0;
-# endif /* defined(AU1XXX_PHY0_ADDR) */
-	} else if (aup->mac_id == 1) { /* get PHY1 */
-# if defined(AU1XXX_PHY1_ADDR)
-		phydev = au_macs[AU1XXX_PHY1_BUSID]->mii_bus->phy_map[AU1XXX_PHY1_ADDR];
-# else
-		printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
-			dev->name);
+		if (aup->phy_addr)
+			phydev = aup->mii_bus->phy_map[aup->phy_addr];
+		else
+			printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
+				dev->name);
 		return 0;
-# endif /* defined(AU1XXX_PHY1_ADDR) */
-	}
-
-#else /* defined(AU1XXX_PHY_STATIC_CONFIG) */
-	int phy_addr;
-
-	/* find the first (lowest address) PHY on the current MAC's MII bus */
-	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
-		if (aup->mii_bus->phy_map[phy_addr]) {
-			phydev = aup->mii_bus->phy_map[phy_addr];
-# if !defined(AU1XXX_PHY_SEARCH_HIGHEST_ADDR)
-			break; /* break out with first one found */
-# endif
-		}
+	} else {
+		int phy_addr;
+
+		/* find the first (lowest address) PHY on the current MAC's MII bus */
+		for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
+			if (aup->mii_bus->phy_map[phy_addr]) {
+				phydev = aup->mii_bus->phy_map[phy_addr];
+				if (!aup->phy_search_highest_addr)
+					break; /* break out with first one found */
+			}
 
-# if defined(AU1XXX_PHY1_SEARCH_ON_MAC0)
-	/* try harder to find a PHY */
-	if (!phydev && (aup->mac_id == 1)) {
-		/* no PHY found, maybe we have a dual PHY? */
-		printk (KERN_INFO DRV_NAME ": no PHY found on MAC1, "
-			"let's see if it's attached to MAC0...\n");
+		if (aup->phy1_search_mac0) {
+			/* try harder to find a PHY */
+			if (!phydev && (aup->mac_id == 1)) {
+				/* no PHY found, maybe we have a dual PHY? */
+				printk (KERN_INFO DRV_NAME ": no PHY found on MAC1, "
+					"let's see if it's attached to MAC0...\n");
 
-		BUG_ON(!au_macs[0]);
+				/* find the first (lowest address) non-attached PHY on
+				 * the MAC0 MII bus */
+				for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+					struct phy_device *const tmp_phydev =
+							aup->mii_bus->phy_map[phy_addr];
 
-		/* find the first (lowest address) non-attached PHY on
-		 * the MAC0 MII bus */
-		for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-			struct phy_device *const tmp_phydev =
-				au_macs[0]->mii_bus->phy_map[phy_addr];
+					if (aup->mac_id == 1)
+						break;
 
-			if (!tmp_phydev)
-				continue; /* no PHY here... */
+					if (!tmp_phydev)
+						continue; /* no PHY here... */
 
-			if (tmp_phydev->attached_dev)
-				continue; /* already claimed by MAC0 */
+					if (tmp_phydev->attached_dev)
+						continue; /* already claimed by MAC0 */
 
-			phydev = tmp_phydev;
-			break; /* found it */
+					phydev = tmp_phydev;
+					break; /* found it */
+				}
+			}
 		}
 	}
-# endif /* defined(AU1XXX_PHY1_SEARCH_OTHER_BUS) */
 
-#endif /* defined(AU1XXX_PHY_STATIC_CONFIG) */
 	if (!phydev) {
 		printk (KERN_ERR DRV_NAME ":%s: no PHY found\n", dev->name);
 		return -1;
@@ -578,31 +543,6 @@ setup_hw_rings(struct au1000_private *aup, u32 rx_base, u32 tx_base)
 	}
 }
 
-static struct {
-	u32 base_addr;
-	u32 macen_addr;
-	int irq;
-	struct net_device *dev;
-} iflist[2] = {
-#ifdef CONFIG_SOC_AU1000
-	{AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT},
-	{AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1100
-	{AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1500
-	{AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT},
-	{AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1550
-	{AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT},
-	{AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT}
-#endif
-};
-
-static int num_ifs;
-
 /*
  * ethtool operations
  */
@@ -711,7 +651,6 @@ static int au1000_init(struct net_device *dev)
 
 static inline void update_rx_stats(struct net_device *dev, u32 status)
 {
-	struct au1000_private *aup = netdev_priv(dev);
 	struct net_device_stats *ps = &dev->stats;
 
 	ps->rx_packets++;
@@ -969,7 +908,7 @@ static netdev_tx_t au1000_tx(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	pDB = aup->tx_db_inuse[aup->tx_head];
-	skb_copy_from_linear_data(skb, pDB->vaddr, skb->len);
+	skb_copy_from_linear_data(skb, (void *)pDB->vaddr, skb->len);
 	if (skb->len < ETH_ZLEN) {
 		for (i=skb->len; i<ETH_ZLEN; i++) {
 			((char *)pDB->vaddr)[i] = 0;
@@ -1058,53 +997,59 @@ static const struct net_device_ops au1000_netdev_ops = {
 	.ndo_change_mtu		= eth_change_mtu,
 };
 
-static struct net_device * au1000_probe(int port_num)
+static int __devinit au1000_probe(struct platform_device *pdev)
 {
 	static unsigned version_printed = 0;
 	struct au1000_private *aup = NULL;
+	struct au1000_eth_platform_data *pd;
 	struct net_device *dev = NULL;
 	db_dest_t *pDB, *pDBfree;
+	int irq, i, err = 0;
+	struct resource *base, *macen;
 	char ethaddr[6];
-	int irq, i, err;
-	u32 base, macen;
 
-	if (port_num >= NUM_ETH_INTERFACES)
-		return NULL;
+	base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!base) {
+		printk(KERN_ERR DRV_NAME ": failed to retrieve base register\n");
+		err = -ENODEV;
+		goto out;
+	}
 
-	base  = CPHYSADDR(iflist[port_num].base_addr );
-	macen = CPHYSADDR(iflist[port_num].macen_addr);
-	irq = iflist[port_num].irq;
+	macen = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!macen) {
+		printk(KERN_ERR DRV_NAME ": failed to retrieve MAC Enable register\n");
+		err = -ENODEV;
+		goto out;
+	}
 
-	if (!request_mem_region( base, MAC_IOSIZE, "Au1x00 ENET") ||
-	    !request_mem_region(macen, 4, "Au1x00 ENET"))
-		return NULL;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		printk(KERN_ERR DRV_NAME ": failed to retrieve IRQ\n");
+		err = -ENODEV;
+		goto out;
+	}
 
-	if (version_printed++ == 0)
-		printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR);
+	if (!request_mem_region(base->start, resource_size(base), pdev->name)) {
+		printk(KERN_ERR DRV_NAME ": failed to request memory region for base registers\n");
+		err = -ENXIO;
+		goto out;
+	}
+
+	if (!request_mem_region(macen->start, resource_size(macen), pdev->name)) {
+		printk(KERN_ERR DRV_NAME ": failed to request memory region for MAC enable register\n");
+		err = -ENXIO;
+		goto err_request;
+	}
 
 	dev = alloc_etherdev(sizeof(struct au1000_private));
 	if (!dev) {
 		printk(KERN_ERR "%s: alloc_etherdev failed\n", DRV_NAME);
-		return NULL;
+		err = -ENOMEM;
+		goto err_alloc;
 	}
 
-	dev->base_addr = base;
-	dev->irq = irq;
-	dev->netdev_ops = &au1000_netdev_ops;
-	SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
-	dev->watchdog_timeo = ETH_TX_TIMEOUT;
-
-	err = register_netdev(dev);
-	if (err != 0) {
-		printk(KERN_ERR "%s: Cannot register net device, error %d\n",
-				DRV_NAME, err);
-		free_netdev(dev);
-		return NULL;
-	}
-
-	printk("%s: Au1xx0 Ethernet found at 0x%x, irq %d\n",
-		dev->name, base, irq);
-
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	platform_set_drvdata(pdev, dev);
 	aup = netdev_priv(dev);
 
 	spin_lock_init(&aup->lock);
@@ -1115,21 +1060,29 @@ static struct net_device * au1000_probe(int port_num)
 						(NUM_TX_BUFFS + NUM_RX_BUFFS),
 						&aup->dma_addr,	0);
 	if (!aup->vaddr) {
-		free_netdev(dev);
-		release_mem_region( base, MAC_IOSIZE);
-		release_mem_region(macen, 4);
-		return NULL;
+		printk(KERN_ERR DRV_NAME ": failed to allocate data buffers\n");
+		err = -ENOMEM;
+		goto err_vaddr;
 	}
 
 	/* aup->mac is the base address of the MAC's registers */
-	aup->mac = (volatile mac_reg_t *)iflist[port_num].base_addr;
+	aup->mac = (volatile mac_reg_t *)ioremap_nocache(base->start, resource_size(base));
+	if (!aup->mac) {
+		printk(KERN_ERR DRV_NAME ": failed to ioremap MAC registers\n");
+		err = -ENXIO;
+		goto err_remap1;
+	}
 
-	/* Setup some variables for quick register address access */
-	aup->enable = (volatile u32 *)iflist[port_num].macen_addr;
-	aup->mac_id = port_num;
-	au_macs[port_num] = aup;
+        /* Setup some variables for quick register address access */
+	aup->enable = (volatile u32 *)ioremap_nocache(macen->start, resource_size(macen));
+	if (!aup->enable) {
+		printk(KERN_ERR DRV_NAME ": failed to ioremap MAC enable register\n");
+		err = -ENXIO;
+		goto err_remap2;
+	}
+	aup->mac_id = pdev->id;
 
-	if (port_num == 0) {
+	if (pdev->id == 0) {
 		if (prom_get_ethernet_addr(ethaddr) == 0)
 			memcpy(au1000_mac_addr, ethaddr, sizeof(au1000_mac_addr));
 		else {
@@ -1139,7 +1092,7 @@ static struct net_device * au1000_probe(int port_num)
 		}
 
 		setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
-	} else if (port_num == 1)
+	} else if (pdev->id == 1)
 		setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
 
 	/*
@@ -1147,14 +1100,37 @@ static struct net_device * au1000_probe(int port_num)
 	 * to match those that are printed on their stickers
 	 */
 	memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr));
-	dev->dev_addr[5] += port_num;
+	dev->dev_addr[5] += pdev->id;
 
 	*aup->enable = 0;
 	aup->mac_enabled = 0;
 
+	pd = pdev->dev.platform_data;
+	if (!pd) {
+		printk(KERN_INFO DRV_NAME ": no platform_data passed, PHY search on MAC0\n");
+		aup->phy1_search_mac0 = 1;
+	} else {
+		aup->phy_static_config = pd->phy_static_config;
+		aup->phy_search_highest_addr = pd->phy_search_highest_addr;
+		aup->phy1_search_mac0 = pd->phy1_search_mac0;
+		aup->phy_addr = pd->phy_addr;
+		aup->phy_busid = pd->phy_busid;
+		aup->phy_irq = pd->phy_irq;
+	}
+
+	if (aup->phy_busid && aup->phy_busid > 0) {
+		printk(KERN_ERR DRV_NAME ": MAC0-associated PHY attached 2nd MACs MII"
+				"bus not supported yet\n");
+		err = -ENODEV;
+		goto err_mdiobus_alloc;
+	}
+
 	aup->mii_bus = mdiobus_alloc();
-	if (aup->mii_bus == NULL)
-		goto err_out;
+	if (aup->mii_bus == NULL) {
+		printk(KERN_ERR DRV_NAME ": failed to allocate mdiobus structure\n");
+		err = -ENOMEM;
+		goto err_mdiobus_alloc;
+	}
 
 	aup->mii_bus->priv = dev;
 	aup->mii_bus->read = au1000_mdiobus_read;
@@ -1168,23 +1144,19 @@ static struct net_device * au1000_probe(int port_num)
 
 	for(i = 0; i < PHY_MAX_ADDR; ++i)
 		aup->mii_bus->irq[i] = PHY_POLL;
-
 	/* if known, set corresponding PHY IRQs */
-#if defined(AU1XXX_PHY_STATIC_CONFIG)
-# if defined(AU1XXX_PHY0_IRQ)
-	if (AU1XXX_PHY0_BUSID == aup->mac_id)
-		aup->mii_bus->irq[AU1XXX_PHY0_ADDR] = AU1XXX_PHY0_IRQ;
-# endif
-# if defined(AU1XXX_PHY1_IRQ)
-	if (AU1XXX_PHY1_BUSID == aup->mac_id)
-		aup->mii_bus->irq[AU1XXX_PHY1_ADDR] = AU1XXX_PHY1_IRQ;
-# endif
-#endif
-	mdiobus_register(aup->mii_bus);
+	if (aup->phy_static_config)
+		if (aup->phy_irq && aup->phy_busid == aup->mac_id)
+			aup->mii_bus->irq[aup->phy_addr] = aup->phy_irq;
+
+	err = mdiobus_register(aup->mii_bus);
+	if (err) {
+		printk(KERN_ERR DRV_NAME " failed to register MDIO bus\n");
+		goto err_mdiobus_reg;
+	}
 
-	if (mii_probe(dev) != 0) {
+	if (mii_probe(dev) != 0)
 		goto err_out;
-	}
 
 	pDBfree = NULL;
 	/* setup the data buffer descriptors and attach a buffer to each one */
@@ -1216,19 +1188,35 @@ static struct net_device * au1000_probe(int port_num)
 		aup->tx_db_inuse[i] = pDB;
 	}
 
+	dev->base_addr = base->start;
+	dev->irq = irq;
+	dev->netdev_ops = &au1000_netdev_ops;
+	SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
+	dev->watchdog_timeo = ETH_TX_TIMEOUT;
+
 	/*
 	 * The boot code uses the ethernet controller, so reset it to start
 	 * fresh.  au1000_init() expects that the device is in reset state.
 	 */
 	reset_mac(dev);
 
-	return dev;
+	err = register_netdev(dev);
+	if (err) {
+		printk(KERN_ERR DRV_NAME "%s: Cannot register net device, aborting.\n",
+					dev->name);
+		goto err_out;
+	}
+
+	printk("%s: Au1xx0 Ethernet found at 0x%lx, irq %d\n",
+			dev->name, (unsigned long)base->start, irq);
+	if (version_printed++ == 0)
+		printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR);
+
+	return 0;
 
 err_out:
-	if (aup->mii_bus != NULL) {
+	if (aup->mii_bus != NULL)
 		mdiobus_unregister(aup->mii_bus);
-		mdiobus_free(aup->mii_bus);
-	}
 
 	/* here we should have a valid dev plus aup-> register addresses
 	 * so we can reset the mac properly.*/
@@ -1242,67 +1230,84 @@ err_out:
 		if (aup->tx_db_inuse[i])
 			ReleaseDB(aup, aup->tx_db_inuse[i]);
 	}
+err_mdiobus_reg:
+	mdiobus_free(aup->mii_bus);
+err_mdiobus_alloc:
+	iounmap(aup->enable);
+err_remap2:
+	iounmap(aup->mac);
+err_remap1:
 	dma_free_noncoherent(NULL, MAX_BUF_SIZE * (NUM_TX_BUFFS + NUM_RX_BUFFS),
 			     (void *)aup->vaddr, aup->dma_addr);
-	unregister_netdev(dev);
+err_vaddr:
 	free_netdev(dev);
-	release_mem_region( base, MAC_IOSIZE);
-	release_mem_region(macen, 4);
-	return NULL;
+err_alloc:
+	release_mem_region(macen->start, resource_size(macen));
+err_request:
+	release_mem_region(base->start, resource_size(base));
+out:
+	return err;
 }
 
-/*
- * Setup the base address and interrupt of the Au1xxx ethernet macs
- * based on cpu type and whether the interface is enabled in sys_pinfunc
- * register. The last interface is enabled if SYS_PF_NI2 (bit 4) is 0.
- */
-static int __init au1000_init_module(void)
+static int __devexit au1000_remove(struct platform_device *pdev)
 {
-	int ni = (int)((au_readl(SYS_PINFUNC) & (u32)(SYS_PF_NI2)) >> 4);
-	struct net_device *dev;
-	int i, found_one = 0;
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct au1000_private *aup = netdev_priv(dev);
+	int i;
+	struct resource *base, *macen;
 
-	num_ifs = NUM_ETH_INTERFACES - ni;
+	platform_set_drvdata(pdev, NULL);
+
+	unregister_netdev(dev);
+	mdiobus_unregister(aup->mii_bus);
+	mdiobus_free(aup->mii_bus);
+
+	for (i = 0; i < NUM_RX_DMA; i++)
+		if (aup->rx_db_inuse[i])
+			ReleaseDB(aup, aup->rx_db_inuse[i]);
+
+	for (i = 0; i < NUM_TX_DMA; i++)
+		if (aup->tx_db_inuse[i])
+			ReleaseDB(aup, aup->tx_db_inuse[i]);
+
+	dma_free_noncoherent(NULL, MAX_BUF_SIZE *
+			(NUM_TX_BUFFS + NUM_RX_BUFFS),
+			(void *)aup->vaddr, aup->dma_addr);
+
+	iounmap(aup->mac);
+	iounmap(aup->enable);
+
+	base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(base->start, resource_size(base));
+
+	macen = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	release_mem_region(macen->start, resource_size(macen));
+
+	free_netdev(dev);
 
-	for(i = 0; i < num_ifs; i++) {
-		dev = au1000_probe(i);
-		iflist[i].dev = dev;
-		if (dev)
-			found_one++;
-	}
-	if (!found_one)
-		return -ENODEV;
 	return 0;
 }
 
-static void __exit au1000_cleanup_module(void)
+static struct platform_driver au1000_eth_driver = {
+	.probe  = au1000_probe,
+	.remove = __devexit_p(au1000_remove),
+	.driver = {
+		.name   = "au1000-eth",
+		.owner  = THIS_MODULE,
+	},
+};
+MODULE_ALIAS("platform:au1000-eth");
+
+
+static int __init au1000_init_module(void)
+{
+	return platform_driver_register(&au1000_eth_driver);
+}
+
+static void __exit au1000_exit_module(void)
 {
-	int i, j;
-	struct net_device *dev;
-	struct au1000_private *aup;
-
-	for (i = 0; i < num_ifs; i++) {
-		dev = iflist[i].dev;
-		if (dev) {
-			aup = netdev_priv(dev);
-			unregister_netdev(dev);
-			mdiobus_unregister(aup->mii_bus);
-			mdiobus_free(aup->mii_bus);
-			for (j = 0; j < NUM_RX_DMA; j++)
-				if (aup->rx_db_inuse[j])
-					ReleaseDB(aup, aup->rx_db_inuse[j]);
-			for (j = 0; j < NUM_TX_DMA; j++)
-				if (aup->tx_db_inuse[j])
-					ReleaseDB(aup, aup->tx_db_inuse[j]);
-			dma_free_noncoherent(NULL, MAX_BUF_SIZE *
-					     (NUM_TX_BUFFS + NUM_RX_BUFFS),
-					     (void *)aup->vaddr, aup->dma_addr);
-			release_mem_region(dev->base_addr, MAC_IOSIZE);
-			release_mem_region(CPHYSADDR(iflist[i].macen_addr), 4);
-			free_netdev(dev);
-		}
-	}
+	platform_driver_unregister(&au1000_eth_driver);
 }
 
 module_init(au1000_init_module);
-module_exit(au1000_cleanup_module);
+module_exit(au1000_exit_module);
diff --git a/drivers/net/au1000_eth.h b/drivers/net/au1000_eth.h
index 824ecd5..f9d29a2 100644
--- a/drivers/net/au1000_eth.h
+++ b/drivers/net/au1000_eth.h
@@ -108,6 +108,15 @@ struct au1000_private {
 	struct phy_device *phy_dev;
 	struct mii_bus *mii_bus;
 
+	/* PHY configuration */
+	int phy_static_config;
+	int phy_search_highest_addr;
+	int phy1_search_mac0;
+
+	int phy_addr;
+	int phy_busid;
+	int phy_irq;
+
 	/* These variables are just for quick access to certain regs addresses. */
 	volatile mac_reg_t *mac;  /* mac registers                      */
 	volatile u32 *enable;     /* address of MAC Enable Register     */
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 8d0be26..bf2072e 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -36,6 +36,7 @@
 #include <linux/phy_fixed.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk.h>
 #include <asm/gpio.h>
 #include <asm/atomic.h>
 
@@ -294,9 +295,16 @@ static int cpmac_mdio_write(struct mii_bus *bus, int phy_id,
 
 static int cpmac_mdio_reset(struct mii_bus *bus)
 {
+	struct clk *cpmac_clk;
+
+	cpmac_clk = clk_get(&bus->dev, "cpmac");
+	if (IS_ERR(cpmac_clk)) {
+		printk(KERN_ERR "unable to get cpmac clock\n");
+		return -1;
+	}
 	ar7_device_reset(AR7_RESET_BIT_MDIO);
 	cpmac_write(bus->priv, CPMAC_MDIO_CONTROL, MDIOC_ENABLE |
-		    MDIOC_CLKDIV(ar7_cpmac_freq() / 2200000 - 1));
+		    MDIOC_CLKDIV(clk_get_rate(cpmac_clk) / 2200000 - 1));
 	return 0;
 }
 
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index 9b2eebd..b5cbd39 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -36,6 +36,7 @@
 #include <asm/pb1000.h>
 #elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
 #include <asm/db1x00.h>
+#include <asm/mach-db1x00/bcsr.h>
 #else 
 #error au1k_ir: unsupported board
 #endif
@@ -66,10 +67,6 @@ static char version[] __devinitdata =
 
 #define RUN_AT(x) (jiffies + (x))
 
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-static BCSR * const bcsr = (BCSR *)0xAE000000;
-#endif
-
 static DEFINE_SPINLOCK(ir_lock);
 
 /*
@@ -282,9 +279,8 @@ static int au1k_irda_net_init(struct net_device *dev)
 
 #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
 	/* power on */
-	bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
-	bcsr->resets |= BCSR_RESETS_IRDA_MODE_FULL;
-	au_sync();
+	bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+			      BCSR_RESETS_IRDA_MODE_FULL);
 #endif
 
 	return 0;
@@ -720,14 +716,14 @@ au1k_irda_set_speed(struct net_device *dev, int speed)
 
 	if (speed == 4000000) {
 #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-		bcsr->resets |= BCSR_RESETS_FIR_SEL;
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_FIR_SEL);
 #else /* Pb1000 and Pb1100 */
 		writel(1<<13, CPLD_AUX1);
 #endif
 	}
 	else {
 #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-		bcsr->resets &= ~BCSR_RESETS_FIR_SEL;
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_FIR_SEL, 0);
 #else /* Pb1000 and Pb1100 */
 		writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1);
 #endif
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index e8f35da..0a6601c 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -173,6 +173,27 @@ config PCMCIA_AU1X00
 	tristate "Au1x00 pcmcia support"
 	depends on SOC_AU1X00 && PCMCIA
 
+config PCMCIA_ALCHEMY_DEVBOARD
+	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
+	depends on SOC_AU1X00 && PCMCIA
+	select 64BIT_PHYS_ADDR
+	help
+	  Enable this driver of you want PCMCIA support on your Alchemy
+	  Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
+	  NOT suitable for the PB1000!
+
+	  This driver is also available as a module called db1xxx_ss.ko
+
+config PCMCIA_XXS1500
+	tristate "MyCable XXS1500 PCMCIA socket support"
+	depends on PCMCIA && MIPS_XXS1500
+	select 64BIT_PHYS_ADDR
+	help
+	  Support for the PCMCIA/CF socket interface on MyCable XXS1500
+	  systems.
+
+	  This driver is also available as a module called xxs1500_ss.ko
+
 config PCMCIA_BCM63XX
 	tristate "bcm63xx pcmcia support"
 	depends on BCM63XX && PCMCIA
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 3c83f68..381b031 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -35,18 +35,10 @@ obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
 obj-$(CONFIG_BFIN_CFPCMCIA)			+= bfin_cf_pcmcia.o
 obj-$(CONFIG_AT91_CF)				+= at91_cf.o
 obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
+obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD)		+= db1xxx_ss.o
 
 au1x00_ss-y					+= au1000_generic.o
 au1x00_ss-$(CONFIG_MIPS_PB1000)			+= au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1100)			+= au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1200)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1500)			+= au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1000)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1100)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1200)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1500)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1550)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_XXS1500)		+= au1000_xxs1500.o
 
 sa1111_cs-y					+= sa1111_generic.o
 sa1111_cs-$(CONFIG_ASSABET_NEPONSET)		+= sa1100_neponset.o
@@ -76,3 +68,5 @@ pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
 pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
+
+obj-$(CONFIG_PCMCIA_XXS1500)			+= xxs1500_ss.o
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
deleted file mode 100644
index c78d77f..0000000
--- a/drivers/pcmcia/au1000_db1x00.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- *
- * Alchemy Semi Db1x00 boards specific pcmcia routines.
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- * Copyright 2004 Pete Popov, updated the driver to 2.6.
- * Followed the sa11xx API and largely copied many of the hardware
- * independent functions.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/signal.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#if defined(CONFIG_MIPS_DB1200)
-	#include <db1200.h>
-#elif defined(CONFIG_MIPS_PB1200)
-	#include <pb1200.h>
-#else
-	#include <asm/mach-db1x00/db1x00.h>
-	static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-#endif
-
-#include "au1000_generic.h"
-
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
-
-
-struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS];
-extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int);
-
-static int db1x00_pcmcia_hw_init(struct au1000_pcmcia_socket *skt)
-{
-#ifdef CONFIG_MIPS_DB1550
-	skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3;
-#elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
-	skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT;
-#else
-	skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2;
-#endif
-	return 0;
-}
-
-static void db1x00_pcmcia_shutdown(struct au1000_pcmcia_socket *skt)
-{
-	bcsr->pcmcia = 0; /* turn off power */
-	au_sync_delay(2);
-}
-
-static void
-db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state *state)
-{
-	u32 inserted;
-	unsigned char vs;
-
-	state->ready = 0;
-	state->vs_Xv = 0;
-	state->vs_3v = 0;
-	state->detect = 0;
-
-	switch (skt->nr) {
-	case 0:
-		vs = bcsr->status & 0x3;
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
-		inserted = BOARD_CARD_INSERTED(0);
-#else
-		inserted = !(bcsr->status & (1<<4));
-#endif
-		break;
-	case 1:
-		vs = (bcsr->status & 0xC)>>2;
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
-		inserted = BOARD_CARD_INSERTED(1);
-#else
-		inserted = !(bcsr->status & (1<<5));
-#endif
-		break;
-	default:/* should never happen */
-		return;
-	}
-
-	if (inserted)
-		debug("db1x00 socket %d: inserted %d, vs %d pcmcia %x\n",
-				skt->nr, inserted, vs, bcsr->pcmcia);
-
-	if (inserted) {
-		switch (vs) {
-			case 0:
-			case 2:
-				state->vs_3v=1;
-				break;
-			case 3: /* 5V */
-				break;
-			default:
-				/* return without setting 'detect' */
-				printk(KERN_ERR "db1x00 bad VS (%d)\n",
-						vs);
-		}
-		state->detect = 1;
-		state->ready = 1;
-	}
-	else {
-		/* if the card was previously inserted and then ejected,
-		 * we should turn off power to it
-		 */
-		if ((skt->nr == 0) && (bcsr->pcmcia & BCSR_PCMCIA_PC0RST)) {
-			bcsr->pcmcia &= ~(BCSR_PCMCIA_PC0RST |
-					BCSR_PCMCIA_PC0DRVEN |
-					BCSR_PCMCIA_PC0VPP |
-					BCSR_PCMCIA_PC0VCC);
-			au_sync_delay(10);
-		}
-		else if ((skt->nr == 1) && bcsr->pcmcia & BCSR_PCMCIA_PC1RST) {
-			bcsr->pcmcia &= ~(BCSR_PCMCIA_PC1RST |
-					BCSR_PCMCIA_PC1DRVEN |
-					BCSR_PCMCIA_PC1VPP |
-					BCSR_PCMCIA_PC1VCC);
-			au_sync_delay(10);
-		}
-	}
-
-	state->bvd1=1;
-	state->bvd2=1;
-	state->wrprot=0;
-}
-
-static int
-db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_state_t *state)
-{
-	u16 pwr;
-	int sock = skt->nr;
-
-	debug("config_skt %d Vcc %dV Vpp %dV, reset %d\n",
-			sock, state->Vcc, state->Vpp,
-			state->flags & SS_RESET);
-
-	/* pcmcia reg was set to zero at init time. Be careful when
-	 * initializing a socket not to wipe out the settings of the
-	 * other socket.
-	 */
-	pwr = bcsr->pcmcia;
-	pwr &= ~(0xf << sock*8); /* clear voltage settings */
-
-	state->Vpp = 0;
-	switch(state->Vcc){
-		case 0:  /* Vcc 0 */
-			pwr |= SET_VCC_VPP(0,0,sock);
-			break;
-		case 50: /* Vcc 5V */
-			switch(state->Vpp) {
-				case 0:
-					pwr |= SET_VCC_VPP(2,0,sock);
-					break;
-				case 50:
-					pwr |= SET_VCC_VPP(2,1,sock);
-					break;
-				case 12:
-					pwr |= SET_VCC_VPP(2,2,sock);
-					break;
-				case 33:
-				default:
-					pwr |= SET_VCC_VPP(0,0,sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n",
-							__func__,
-							state->Vcc,
-							state->Vpp);
-					break;
-			}
-			break;
-		case 33: /* Vcc 3.3V */
-			switch(state->Vpp) {
-				case 0:
-					pwr |= SET_VCC_VPP(1,0,sock);
-					break;
-				case 12:
-					pwr |= SET_VCC_VPP(1,2,sock);
-					break;
-				case 33:
-					pwr |= SET_VCC_VPP(1,1,sock);
-					break;
-				case 50:
-				default:
-					pwr |= SET_VCC_VPP(0,0,sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n",
-							__func__,
-							state->Vcc,
-							state->Vpp);
-					break;
-			}
-			break;
-		default: /* what's this ? */
-			pwr |= SET_VCC_VPP(0,0,sock);
-			printk(KERN_ERR "%s: bad Vcc %d\n",
-					__func__, state->Vcc);
-			break;
-	}
-
-	bcsr->pcmcia = pwr;
-	au_sync_delay(300);
-
-	if (sock == 0) {
-		if (!(state->flags & SS_RESET)) {
-			pwr |= BCSR_PCMCIA_PC0DRVEN;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(300);
-			pwr |= BCSR_PCMCIA_PC0RST;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
-		}
-		else {
-			pwr &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN);
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
-		}
-	}
-	else {
-		if (!(state->flags & SS_RESET)) {
-			pwr |= BCSR_PCMCIA_PC1DRVEN;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(300);
-			pwr |= BCSR_PCMCIA_PC1RST;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
-		}
-		else {
-			pwr &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN);
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
-		}
-	}
-	return 0;
-}
-
-/*
- * Enable card status IRQs on (re-)initialisation.  This can
- * be called at initialisation, power management event, or
- * pcmcia event.
- */
-void db1x00_socket_init(struct au1000_pcmcia_socket *skt)
-{
-	/* nothing to do for now */
-}
-
-/*
- * Disable card status IRQs and PCMCIA bus on suspend.
- */
-void db1x00_socket_suspend(struct au1000_pcmcia_socket *skt)
-{
-	/* nothing to do for now */
-}
-
-struct pcmcia_low_level db1x00_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.hw_init 		= db1x00_pcmcia_hw_init,
-	.hw_shutdown		= db1x00_pcmcia_shutdown,
-
-	.socket_state		= db1x00_pcmcia_socket_state,
-	.configure_socket	= db1x00_pcmcia_configure_socket,
-
-	.socket_init		= db1x00_socket_init,
-	.socket_suspend		= db1x00_socket_suspend
-};
-
-int au1x_board_init(struct device *dev)
-{
-	int ret = -ENODEV;
-	bcsr->pcmcia = 0; /* turn off power, if it's not already off */
-	au_sync_delay(2);
-	ret = au1x00_pcmcia_socket_probe(dev, &db1x00_pcmcia_ops, 0, 2);
-	return ret;
-}
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index 0208870..171c8a6 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -405,18 +405,16 @@ int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops,
 			skt->virt_io = (void *)
 				(ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) -
 				(u32)mips_io_port_base);
-			skt->phys_attr = AU1X_SOCK0_PSEUDO_PHYS_ATTR;
-			skt->phys_mem = AU1X_SOCK0_PSEUDO_PHYS_MEM;
+			skt->phys_attr = AU1X_SOCK0_PHYS_ATTR;
+			skt->phys_mem = AU1X_SOCK0_PHYS_MEM;
 		}
-#ifndef CONFIG_MIPS_XXS1500
 		else  {
 			skt->virt_io = (void *)
 				(ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) -
 				(u32)mips_io_port_base);
-			skt->phys_attr = AU1X_SOCK1_PSEUDO_PHYS_ATTR;
-			skt->phys_mem = AU1X_SOCK1_PSEUDO_PHYS_MEM;
+			skt->phys_attr = AU1X_SOCK1_PHYS_ATTR;
+			skt->phys_mem = AU1X_SOCK1_PHYS_MEM;
 		}
-#endif
 		pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io;
 		ret = ops->hw_init(skt);
 
diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h
index 13a4fbc..a324d32 100644
--- a/drivers/pcmcia/au1000_generic.h
+++ b/drivers/pcmcia/au1000_generic.h
@@ -36,30 +36,14 @@
 #define AU1X_SOCK0_IO        0xF00000000ULL
 #define AU1X_SOCK0_PHYS_ATTR 0xF40000000ULL
 #define AU1X_SOCK0_PHYS_MEM  0xF80000000ULL
-/* pseudo 32 bit phys addresses, which get fixed up to the
- * real 36 bit address in fixup_bigphys_addr() */
-#define AU1X_SOCK0_PSEUDO_PHYS_ATTR 0xF4000000
-#define AU1X_SOCK0_PSEUDO_PHYS_MEM  0xF8000000
 
 /* pcmcia socket 1 needs external glue logic so the memory map
  * differs from board to board.
  */
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || \
-    defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550) || \
-    defined(CONFIG_MIPS_PB1200)
+#if defined(CONFIG_MIPS_PB1000)
 #define AU1X_SOCK1_IO        0xF08000000ULL
 #define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL
 #define AU1X_SOCK1_PHYS_MEM  0xF88000000ULL
-#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000
-#define AU1X_SOCK1_PSEUDO_PHYS_MEM  0xF8800000
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
-      defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) || \
-      defined(CONFIG_MIPS_DB1200)
-#define AU1X_SOCK1_IO        0xF04000000ULL
-#define AU1X_SOCK1_PHYS_ATTR 0xF44000000ULL
-#define AU1X_SOCK1_PHYS_MEM  0xF84000000ULL
-#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4400000
-#define AU1X_SOCK1_PSEUDO_PHYS_MEM  0xF8400000
 #endif
 
 struct pcmcia_state {
diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c
index b1984ed..5a979cb 100644
--- a/drivers/pcmcia/au1000_pb1x00.c
+++ b/drivers/pcmcia/au1000_pb1x00.c
@@ -1,6 +1,6 @@
 /*
  *
- * Alchemy Semi Pb1x00 boards specific pcmcia routines.
+ * Alchemy Semi Pb1000 boards specific pcmcia routines.
  *
  * Copyright 2002 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
@@ -46,20 +46,11 @@
 
 #define debug(fmt, arg...) do { } while (0)
 
-#ifdef CONFIG_MIPS_PB1000
 #include <asm/pb1000.h>
 #define PCMCIA_IRQ AU1000_GPIO_15
-#elif defined (CONFIG_MIPS_PB1500)
-#include <asm/pb1500.h>
-#define PCMCIA_IRQ AU1500_GPIO_203
-#elif defined (CONFIG_MIPS_PB1100)
-#include <asm/pb1100.h>
-#define PCMCIA_IRQ AU1000_GPIO_11
-#endif
 
 static int pb1x00_pcmcia_init(struct pcmcia_init *init)
 {
-#ifdef CONFIG_MIPS_PB1000
 	u16 pcr;
 	pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
 
@@ -74,21 +65,10 @@ static int pb1x00_pcmcia_init(struct pcmcia_init *init)
 	au_sync_delay(20);
 	  
 	return PCMCIA_NUM_SOCKS;
-
-#else /* fixme -- take care of the Pb1500 at some point */
-
-	u16 pcr;
-	pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
-	pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
-	au_writew(pcr, PCMCIA_BOARD_REG);
-	au_sync_delay(500);
-	return PCMCIA_NUM_SOCKS;
-#endif
 }
 
 static int pb1x00_pcmcia_shutdown(void)
 {
-#ifdef CONFIG_MIPS_PB1000
 	u16 pcr;
 	pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
 	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
@@ -96,14 +76,6 @@ static int pb1x00_pcmcia_shutdown(void)
 	au_writel(pcr, PB1000_PCR);
 	au_sync_delay(20);
 	return 0;
-#else
-	u16 pcr;
-	pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
-	pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
-	au_writew(pcr, PCMCIA_BOARD_REG);
-	au_sync_delay(2);
-	return 0;
-#endif
 }
 
 static int 
@@ -112,21 +84,11 @@ pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
 	u32 inserted0, inserted1;
 	u16 vs0, vs1;
 
-#ifdef CONFIG_MIPS_PB1000
 	vs0 = vs1 = (u16)au_readl(PB1000_ACR1);
 	inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2));
 	inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2));
 	vs0 = (vs0 >> 4) & 0x3;
 	vs1 = (vs1 >> 12) & 0x3;
-#else
-	vs0 = (au_readw(BOARD_STATUS_REG) >> 4) & 0x3;
-#ifdef CONFIG_MIPS_PB1500
-	inserted0 = !((au_readl(GPIO2_PINSTATE) >> 1) & 0x1); /* gpio 201 */
-#else /* Pb1100 */
-	inserted0 = !((au_readl(SYS_PINSTATERD) >> 9) & 0x1); /* gpio 9 */
-#endif
-	inserted1 = 0;
-#endif
 
 	state->ready = 0;
 	state->vs_Xv = 0;
@@ -203,7 +165,6 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
 
 	if(configure->sock > PCMCIA_MAX_SOCK) return -1;
 
-#ifdef CONFIG_MIPS_PB1000
 	pcr = au_readl(PB1000_PCR);
 
 	if (configure->sock == 0) {
@@ -323,84 +284,6 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
 	au_writel(pcr, PB1000_PCR);
 	au_sync_delay(300);
 
-#else
-
-	pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf;
-
-	debug("Vcc %dV Vpp %dV, pcr %x, reset %d\n", 
-			configure->vcc, configure->vpp, pcr, configure->reset);
-
-
-	switch(configure->vcc){
-		case 0:  /* Vcc 0 */
-			pcr |= SET_VCC_VPP(0,0);
-			break;
-		case 50: /* Vcc 5V */
-			switch(configure->vpp) {
-				case 0:
-					pcr |= SET_VCC_VPP(2,0);
-					break;
-				case 50:
-					pcr |= SET_VCC_VPP(2,1);
-					break;
-				case 12:
-					pcr |= SET_VCC_VPP(2,2);
-					break;
-				case 33:
-				default:
-					pcr |= SET_VCC_VPP(0,0);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__func__,
-							configure->vcc, 
-							configure->vpp);
-					break;
-			}
-			break;
-		case 33: /* Vcc 3.3V */
-			switch(configure->vpp) {
-				case 0:
-					pcr |= SET_VCC_VPP(1,0);
-					break;
-				case 12:
-					pcr |= SET_VCC_VPP(1,2);
-					break;
-				case 33:
-					pcr |= SET_VCC_VPP(1,1);
-					break;
-				case 50:
-				default:
-					pcr |= SET_VCC_VPP(0,0);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__func__,
-							configure->vcc, 
-							configure->vpp);
-					break;
-			}
-			break;
-		default: /* what's this ? */
-			pcr |= SET_VCC_VPP(0,0);
-			printk(KERN_ERR "%s: bad Vcc %d\n", 
-					__func__, configure->vcc);
-			break;
-	}
-
-	au_writew(pcr, PCMCIA_BOARD_REG);
-	au_sync_delay(300);
-
-	if (!configure->reset) {
-		pcr |= PC_DRV_EN;
-		au_writew(pcr, PCMCIA_BOARD_REG);
-		au_sync_delay(100);
-		pcr |= PC_DEASSERT_RST;
-		au_writew(pcr, PCMCIA_BOARD_REG);
-		au_sync_delay(100);
-	}
-	else {
-		pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
-		au_writew(pcr, PCMCIA_BOARD_REG);
-		au_sync_delay(100);
-	}
-#endif
 	return 0;
 }
 
diff --git a/drivers/pcmcia/au1000_xxs1500.c b/drivers/pcmcia/au1000_xxs1500.c
deleted file mode 100644
index b43d47b..0000000
--- a/drivers/pcmcia/au1000_xxs1500.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- *
- * MyCable board specific pcmcia routines.
- *
- * Copyright 2003 MontaVista Software Inc.
- * Author: Pete Popov, MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/proc_fs.h>
-#include <linux/types.h>
-
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/ss.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/bus_ops.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#include <asm/au1000.h>
-#include <asm/au1000_pcmcia.h>
-
-#define PCMCIA_MAX_SOCK		0
-#define PCMCIA_NUM_SOCKS	(PCMCIA_MAX_SOCK + 1)
-#define PCMCIA_IRQ		AU1000_GPIO_4
-
-#if 0
-#define DEBUG(x, args...)	printk(__func__ ": " x, ##args)
-#else
-#define DEBUG(x,args...)
-#endif
-
-static int xxs1500_pcmcia_init(struct pcmcia_init *init)
-{
-	return PCMCIA_NUM_SOCKS;
-}
-
-static int xxs1500_pcmcia_shutdown(void)
-{
-	/* turn off power */
-	au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30),
-			GPIO2_OUTPUT);
-	au_sync_delay(100);
-
-	/* assert reset */
-	au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20),
-			GPIO2_OUTPUT);
-	au_sync_delay(100);
-	return 0;
-}
-
-
-static int
-xxs1500_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
-{
-	u32 inserted; u32 vs;
-	unsigned long gpio, gpio2;
-
-	if(sock > PCMCIA_MAX_SOCK) return -1;
-
-	gpio = au_readl(SYS_PINSTATERD);
-	gpio2 = au_readl(GPIO2_PINSTATE);
-
-	vs = gpio2 & ((1<<8) | (1<<9));
-	inserted = (!(gpio & 0x1) && !(gpio & 0x2));
-
-	state->ready = 0;
-	state->vs_Xv = 0;
-	state->vs_3v = 0;
-	state->detect = 0;
-
-	if (inserted) {
-		switch (vs) {
-			case 0:
-			case 1:
-			case 2:
-				state->vs_3v=1;
-				break;
-			case 3: /* 5V */
-			default:
-				/* return without setting 'detect' */
-				printk(KERN_ERR "au1x00_cs: unsupported VS\n",
-						vs);
-				return;
-		}
-		state->detect = 1;
-	}
-
-	if (state->detect) {
-		state->ready = 1;
-	}
-
-	state->bvd1= gpio2 & (1<<10);
-	state->bvd2 = gpio2 & (1<<11);
-	state->wrprot=0;
-	return 1;
-}
-
-
-static int xxs1500_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
-{
-
-	if(info->sock > PCMCIA_MAX_SOCK) return -1;
-	info->irq = PCMCIA_IRQ;
-	return 0;
-}
-
-
-static int
-xxs1500_pcmcia_configure_socket(const struct pcmcia_configure *configure)
-{
-
-	if(configure->sock > PCMCIA_MAX_SOCK) return -1;
-
-	DEBUG("Vcc %dV Vpp %dV, reset %d\n",
-			configure->vcc, configure->vpp, configure->reset);
-
-	switch(configure->vcc){
-		case 33: /* Vcc 3.3V */
-			/* turn on power */
-			DEBUG("turn on power\n");
-			au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30),
-					GPIO2_OUTPUT);
-			au_sync_delay(100);
-			break;
-		case 50: /* Vcc 5V */
-		default: /* what's this ? */
-			printk(KERN_ERR "au1x00_cs: unsupported VCC\n");
-		case 0:  /* Vcc 0 */
-			/* turn off power */
-			au_sync_delay(100);
-			au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30),
-					GPIO2_OUTPUT);
-			break;
-	}
-
-	if (!configure->reset) {
-		DEBUG("deassert reset\n");
-		au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<4))|(1<<20),
-				GPIO2_OUTPUT);
-		au_sync_delay(100);
-		au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<5))|(1<<21),
-				GPIO2_OUTPUT);
-	}
-	else {
-		DEBUG("assert reset\n");
-		au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20),
-				GPIO2_OUTPUT);
-	}
-	au_sync_delay(100);
-	return 0;
-}
-
-struct pcmcia_low_level xxs1500_pcmcia_ops = {
-	xxs1500_pcmcia_init,
-	xxs1500_pcmcia_shutdown,
-	xxs1500_pcmcia_socket_state,
-	xxs1500_pcmcia_get_irq_info,
-	xxs1500_pcmcia_configure_socket
-};
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
new file mode 100644
index 0000000..3889cf07
--- /dev/null
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -0,0 +1,623 @@
+/*
+ * PCMCIA socket code for the Alchemy Db1xxx/Pb1xxx boards.
+ *
+ * Copyright (c) 2009 Manuel Lauss <manuel.lauss@gmail.com>
+ *
+ */
+
+/* This is a fairly generic PCMCIA socket driver suitable for the
+ * following Alchemy Development boards:
+ *  Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200.
+ *
+ * The Db1000 is used as a reference:  Per-socket card-, carddetect- and
+ *  statuschange IRQs connected to SoC GPIOs, control and status register
+ *  bits arranged in per-socket groups in an external PLD.  All boards
+ *  listed here use this layout, including bit positions and meanings.
+ *  Of course there are exceptions in later boards:
+ *
+ *	- Pb1100/Pb1500:  single socket only; voltage key bits VS are
+ *			  at STATUS[5:4] (instead of STATUS[1:0]).
+ *	- Au1200-based:	  additional card-eject irqs, irqs not gpios!
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/spinlock.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/ss.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#define MEM_MAP_SIZE	0x400000
+#define IO_MAP_SIZE	0x1000
+
+struct db1x_pcmcia_sock {
+	struct pcmcia_socket	socket;
+	int		nr;		/* socket number */
+	void		*virt_io;
+
+	/* the "pseudo" addresses of the PCMCIA space. */
+	phys_addr_t	phys_io;
+	phys_addr_t	phys_attr;
+	phys_addr_t	phys_mem;
+
+	/* previous flags for set_socket() */
+	unsigned int old_flags;
+
+	/* interrupt sources: linux irq numbers! */
+	int	insert_irq;	/* default carddetect irq */
+	int	stschg_irq;	/* card-status-change irq */
+	int	card_irq;	/* card irq */
+	int	eject_irq;	/* db1200/pb1200 have these */
+
+#define BOARD_TYPE_DEFAULT	0	/* most boards */
+#define BOARD_TYPE_DB1200	1	/* IRQs aren't gpios */
+#define BOARD_TYPE_PB1100	2	/* VS bits slightly different */
+	int	board_type;
+};
+
+#define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket)
+
+/* DB/PB1200: check CPLD SIGSTATUS register bit 10/12 */
+static int db1200_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+	unsigned short sigstat;
+
+	sigstat = bcsr_read(BCSR_SIGSTAT);
+	return sigstat & 1 << (8 + 2 * sock->nr);
+}
+
+/* carddetect gpio: low-active */
+static int db1000_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+	return !gpio_get_value(irq_to_gpio(sock->insert_irq));
+}
+
+static int db1x_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+	switch (sock->board_type) {
+	case BOARD_TYPE_DB1200:
+		return db1200_card_inserted(sock);
+	default:
+		return db1000_card_inserted(sock);
+	}
+}
+
+/* STSCHG tends to bounce heavily when cards are inserted/ejected.
+ * To avoid this, the interrupt is normally disabled and only enabled
+ * after reset to a card has been de-asserted.
+ */
+static inline void set_stschg(struct db1x_pcmcia_sock *sock, int en)
+{
+	if (sock->stschg_irq != -1) {
+		if (en)
+			enable_irq(sock->stschg_irq);
+		else
+			disable_irq(sock->stschg_irq);
+	}
+}
+
+static irqreturn_t db1000_pcmcia_cdirq(int irq, void *data)
+{
+	struct db1x_pcmcia_sock *sock = data;
+
+	pcmcia_parse_events(&sock->socket, SS_DETECT);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t db1000_pcmcia_stschgirq(int irq, void *data)
+{
+	struct db1x_pcmcia_sock *sock = data;
+
+	pcmcia_parse_events(&sock->socket, SS_STSCHG);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data)
+{
+	struct db1x_pcmcia_sock *sock = data;
+
+	/* Db/Pb1200 have separate per-socket insertion and ejection
+	 * interrupts which stay asserted as long as the card is
+	 * inserted/missing.  The one which caused us to be called
+	 * needs to be disabled and the other one enabled.
+	 */
+	if (irq == sock->insert_irq) {
+		disable_irq_nosync(sock->insert_irq);
+		enable_irq(sock->eject_irq);
+	} else {
+		disable_irq_nosync(sock->eject_irq);
+		enable_irq(sock->insert_irq);
+	}
+
+	pcmcia_parse_events(&sock->socket, SS_DETECT);
+
+	return IRQ_HANDLED;
+}
+
+static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
+{
+	int ret;
+	unsigned long flags;
+
+	if (sock->stschg_irq != -1) {
+		ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq,
+				  0, "pcmcia_stschg", sock);
+		if (ret)
+			return ret;
+	}
+
+	/* Db/Pb1200 have separate per-socket insertion and ejection
+	 * interrupts, which should show edge behaviour but don't.
+	 * So interrupts are disabled until both insertion and
+	 * ejection handler have been registered and the currently
+	 * active one disabled.
+	 */
+	if (sock->board_type == BOARD_TYPE_DB1200) {
+		local_irq_save(flags);
+
+		ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
+				  IRQF_DISABLED, "pcmcia_insert", sock);
+		if (ret)
+			goto out1;
+
+		ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq,
+				  IRQF_DISABLED, "pcmcia_eject", sock);
+		if (ret) {
+			free_irq(sock->insert_irq, sock);
+			local_irq_restore(flags);
+			goto out1;
+		}
+
+		/* disable the currently active one */
+		if (db1200_card_inserted(sock))
+			disable_irq_nosync(sock->insert_irq);
+		else
+			disable_irq_nosync(sock->eject_irq);
+
+		local_irq_restore(flags);
+	} else {
+		/* all other (older) Db1x00 boards use a GPIO to show
+		 * card detection status:  use both-edge triggers.
+		 */
+		set_irq_type(sock->insert_irq, IRQ_TYPE_EDGE_BOTH);
+		ret = request_irq(sock->insert_irq, db1000_pcmcia_cdirq,
+				  0, "pcmcia_carddetect", sock);
+
+		if (ret)
+			goto out1;
+	}
+
+	return 0;	/* all done */
+
+out1:
+	if (sock->stschg_irq != -1)
+		free_irq(sock->stschg_irq, sock);
+
+	return ret;
+}
+
+static void db1x_pcmcia_free_irqs(struct db1x_pcmcia_sock *sock)
+{
+	if (sock->stschg_irq != -1)
+		free_irq(sock->stschg_irq, sock);
+
+	free_irq(sock->insert_irq, sock);
+	if (sock->eject_irq != -1)
+		free_irq(sock->eject_irq, sock);
+}
+
+/*
+ * configure a PCMCIA socket on the Db1x00 series of boards (and
+ * compatibles).
+ *
+ * 2 external registers are involved:
+ *   pcmcia_status (offset 0x04): bits [0:1/2:3]: read card voltage id
+ *   pcmcia_control(offset 0x10):
+ *	bits[0:1] set vcc for card
+ *	bits[2:3] set vpp for card
+ *	bit 4:	enable data buffers
+ *	bit 7:	reset# for card
+ *	add 8 for second socket.
+ */
+static int db1x_pcmcia_configure(struct pcmcia_socket *skt,
+				 struct socket_state_t *state)
+{
+	struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+	unsigned short cr_clr, cr_set;
+	unsigned int changed;
+	int v, p, ret;
+
+	/* card voltage setup */
+	cr_clr = (0xf << (sock->nr * 8)); /* clear voltage settings */
+	cr_set = 0;
+	v = p = ret = 0;
+
+	switch (state->Vcc) {
+	case 50:
+		++v;
+	case 33:
+		++v;
+	case 0:
+		break;
+	default:
+		printk(KERN_INFO "pcmcia%d unsupported Vcc %d\n",
+			sock->nr, state->Vcc);
+	}
+
+	switch (state->Vpp) {
+	case 12:
+		++p;
+	case 33:
+	case 50:
+		++p;
+	case 0:
+		break;
+	default:
+		printk(KERN_INFO "pcmcia%d unsupported Vpp %d\n",
+			sock->nr, state->Vpp);
+	}
+
+	/* sanity check: Vpp must be 0, 12, or Vcc */
+	if (((state->Vcc == 33) && (state->Vpp == 50)) ||
+	    ((state->Vcc == 50) && (state->Vpp == 33))) {
+		printk(KERN_INFO "pcmcia%d bad Vcc/Vpp combo (%d %d)\n",
+			sock->nr, state->Vcc, state->Vpp);
+		v = p = 0;
+		ret = -EINVAL;
+	}
+
+	/* create new voltage code */
+	cr_set |= ((v << 2) | p) << (sock->nr * 8);
+
+	changed = state->flags ^ sock->old_flags;
+
+	if (changed & SS_RESET) {
+		if (state->flags & SS_RESET) {
+			set_stschg(sock, 0);
+			/* assert reset, disable io buffers */
+			cr_clr |= (1 << (7 + (sock->nr * 8)));
+			cr_clr |= (1 << (4 + (sock->nr * 8)));
+		} else {
+			/* de-assert reset, enable io buffers */
+			cr_set |= 1 << (7 + (sock->nr * 8));
+			cr_set |= 1 << (4 + (sock->nr * 8));
+		}
+	}
+
+	/* update PCMCIA configuration */
+	bcsr_mod(BCSR_PCMCIA, cr_clr, cr_set);
+
+	sock->old_flags = state->flags;
+
+	/* reset was taken away: give card time to initialize properly */
+	if ((changed & SS_RESET) && !(state->flags & SS_RESET)) {
+		msleep(500);
+		set_stschg(sock, 1);
+	}
+
+	return ret;
+}
+
+/* VCC bits at [3:2]/[11:10] */
+#define GET_VCC(cr, socknr)		\
+	((((cr) >> 2) >> ((socknr) * 8)) & 3)
+
+/* VS bits at [0:1]/[3:2] */
+#define GET_VS(sr, socknr)		\
+	(((sr) >> (2 * (socknr))) & 3)
+
+/* reset bits at [7]/[15] */
+#define GET_RESET(cr, socknr)		\
+	((cr) & (1 << (7 + (8 * (socknr)))))
+
+static int db1x_pcmcia_get_status(struct pcmcia_socket *skt,
+				  unsigned int *value)
+{
+	struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+	unsigned short cr, sr;
+	unsigned int status;
+
+	status = db1x_card_inserted(sock) ? SS_DETECT : 0;
+
+	cr = bcsr_read(BCSR_PCMCIA);
+	sr = bcsr_read(BCSR_STATUS);
+
+	/* PB1100/PB1500: voltage key bits are at [5:4] */
+	if (sock->board_type == BOARD_TYPE_PB1100)
+		sr >>= 4;
+
+	/* determine card type */
+	switch (GET_VS(sr, sock->nr)) {
+	case 0:
+	case 2:
+		status |= SS_3VCARD;	/* 3V card */
+	case 3:
+		break;			/* 5V card: set nothing */
+	default:
+		status |= SS_XVCARD;	/* treated as unsupported in core */
+	}
+
+	/* if Vcc is not zero, we have applied power to a card */
+	status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0;
+
+	/* reset de-asserted? then we're ready */
+	status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET;
+
+	*value = status;
+
+	return 0;
+}
+
+static int db1x_pcmcia_sock_init(struct pcmcia_socket *skt)
+{
+	return 0;
+}
+
+static int db1x_pcmcia_sock_suspend(struct pcmcia_socket *skt)
+{
+	return 0;
+}
+
+static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt,
+				    struct pccard_io_map *map)
+{
+	struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+
+	map->start = (u32)sock->virt_io;
+	map->stop = map->start + IO_MAP_SIZE;
+
+	return 0;
+}
+
+static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt,
+				     struct pccard_mem_map *map)
+{
+	struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+
+	if (map->flags & MAP_ATTRIB)
+		map->static_start = sock->phys_attr + map->card_start;
+	else
+		map->static_start = sock->phys_mem + map->card_start;
+
+	return 0;
+}
+
+static struct pccard_operations db1x_pcmcia_operations = {
+	.init			= db1x_pcmcia_sock_init,
+	.suspend		= db1x_pcmcia_sock_suspend,
+	.get_status		= db1x_pcmcia_get_status,
+	.set_socket		= db1x_pcmcia_configure,
+	.set_io_map		= au1x00_pcmcia_set_io_map,
+	.set_mem_map		= au1x00_pcmcia_set_mem_map,
+};
+
+static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
+{
+	struct db1x_pcmcia_sock *sock;
+	struct resource *r;
+	int ret, bid;
+
+	sock = kzalloc(sizeof(struct db1x_pcmcia_sock), GFP_KERNEL);
+	if (!sock)
+		return -ENOMEM;
+
+	sock->nr = pdev->id;
+
+	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	switch (bid) {
+	case BCSR_WHOAMI_PB1500:
+	case BCSR_WHOAMI_PB1500R2:
+	case BCSR_WHOAMI_PB1100:
+		sock->board_type = BOARD_TYPE_PB1100;
+		break;
+	case BCSR_WHOAMI_DB1000 ... BCSR_WHOAMI_PB1550_SDR:
+		sock->board_type = BOARD_TYPE_DEFAULT;
+		break;
+	case BCSR_WHOAMI_PB1200 ... BCSR_WHOAMI_DB1200:
+		sock->board_type = BOARD_TYPE_DB1200;
+		break;
+	default:
+		printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid);
+		ret = -ENODEV;
+		goto out0;
+	};
+
+	/*
+	 * gather resources necessary and optional nice-to-haves to
+	 * operate a socket:
+	 * This includes IRQs for Carddetection/ejection, the card
+	 *  itself and optional status change detection.
+	 * Also, the memory areas covered by a socket.  For these
+	 *  we require the 32bit "pseudo" addresses (see the au1000.h
+	 *  header for more information).
+	 */
+
+	/* card: irq assigned to the card itself. */
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "card");
+	sock->card_irq = r ? r->start : 0;
+
+	/* insert: irq which triggers on card insertion/ejection */
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "insert");
+	sock->insert_irq = r ? r->start : -1;
+
+	/* stschg: irq which trigger on card status change (optional) */
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "stschg");
+	sock->stschg_irq = r ? r->start : -1;
+
+	/* eject: irq which triggers on ejection (DB1200/PB1200 only) */
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "eject");
+	sock->eject_irq = r ? r->start : -1;
+
+	ret = -ENODEV;
+
+	/*
+	 * pseudo-attr:  The 32bit address of the PCMCIA attribute space
+	 * for this socket (usually the 36bit address shifted 4 to the
+	 * right).
+	 */
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
+	if (!r) {
+		printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n",
+			sock->nr);
+		goto out0;
+	}
+	sock->phys_attr = r->start;
+
+	/*
+	 * pseudo-mem:  The 32bit address of the PCMCIA memory space for
+	 * this socket (usually the 36bit address shifted 4 to the right)
+	 */
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
+	if (!r) {
+		printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n",
+			sock->nr);
+		goto out0;
+	}
+	sock->phys_mem = r->start;
+
+	/*
+	 * pseudo-io:  The 32bit address of the PCMCIA IO space for this
+	 * socket (usually the 36bit address shifted 4 to the right).
+	 */
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
+	if (!r) {
+		printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n",
+			sock->nr);
+		goto out0;
+	}
+	sock->phys_io = r->start;
+
+	/*
+	 * PCMCIA client drivers use the inb/outb macros to access
+	 * the IO registers.  Since mips_io_port_base is added
+	 * to the access address of the mips implementation of
+	 * inb/outb, we need to subtract it here because we want
+	 * to access the I/O or MEM address directly, without
+	 * going through this "mips_io_port_base" mechanism.
+	 */
+	sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) -
+				 mips_io_port_base);
+
+	if (!sock->virt_io) {
+		printk(KERN_ERR "pcmcia%d: cannot remap IO area\n",
+			sock->nr);
+		ret = -ENOMEM;
+		goto out0;
+	}
+
+	sock->socket.ops	= &db1x_pcmcia_operations;
+	sock->socket.owner	= THIS_MODULE;
+	sock->socket.pci_irq	= sock->card_irq;
+	sock->socket.features	= SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+	sock->socket.map_size	= MEM_MAP_SIZE;
+	sock->socket.io_offset	= (unsigned long)sock->virt_io;
+	sock->socket.dev.parent	= &pdev->dev;
+	sock->socket.resource_ops = &pccard_static_ops;
+
+	platform_set_drvdata(pdev, sock);
+
+	ret = db1x_pcmcia_setup_irqs(sock);
+	if (ret) {
+		printk(KERN_ERR "pcmcia%d cannot setup interrupts\n",
+			sock->nr);
+		goto out1;
+	}
+
+	set_stschg(sock, 0);
+
+	ret = pcmcia_register_socket(&sock->socket);
+	if (ret) {
+		printk(KERN_ERR "pcmcia%d failed to register\n", sock->nr);
+		goto out2;
+	}
+
+	printk(KERN_INFO "Alchemy Db/Pb1xxx pcmcia%d @ io/attr/mem %09llx"
+		"(%p) %09llx %09llx  card/insert/stschg/eject irqs @ %d "
+		"%d %d %d\n", sock->nr, sock->phys_io, sock->virt_io,
+		sock->phys_attr, sock->phys_mem, sock->card_irq,
+		sock->insert_irq, sock->stschg_irq, sock->eject_irq);
+
+	return 0;
+
+out2:
+	db1x_pcmcia_free_irqs(sock);
+out1:
+	iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+out0:
+	kfree(sock);
+	return ret;
+}
+
+static int __devexit db1x_pcmcia_socket_remove(struct platform_device *pdev)
+{
+	struct db1x_pcmcia_sock *sock = platform_get_drvdata(pdev);
+
+	db1x_pcmcia_free_irqs(sock);
+	pcmcia_unregister_socket(&sock->socket);
+	iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+	kfree(sock);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int db1x_pcmcia_suspend(struct device *dev)
+{
+	return pcmcia_socket_dev_suspend(dev);
+}
+
+static int db1x_pcmcia_resume(struct device *dev)
+{
+	return pcmcia_socket_dev_resume(dev);
+}
+
+static struct dev_pm_ops db1x_pcmcia_pmops = {
+	.resume		= db1x_pcmcia_resume,
+	.suspend	= db1x_pcmcia_suspend,
+	.thaw		= db1x_pcmcia_resume,
+	.freeze		= db1x_pcmcia_suspend,
+};
+
+#define DB1XXX_SS_PMOPS &db1x_pcmcia_pmops
+
+#else
+
+#define DB1XXX_SS_PMOPS NULL
+
+#endif
+
+static struct platform_driver db1x_pcmcia_socket_driver = {
+	.driver	= {
+		.name	= "db1xxx_pcmcia",
+		.owner	= THIS_MODULE,
+		.pm	= DB1XXX_SS_PMOPS
+	},
+	.probe		= db1x_pcmcia_socket_probe,
+	.remove		= __devexit_p(db1x_pcmcia_socket_remove),
+};
+
+int __init db1x_pcmcia_socket_load(void)
+{
+	return platform_driver_register(&db1x_pcmcia_socket_driver);
+}
+
+void  __exit db1x_pcmcia_socket_unload(void)
+{
+	platform_driver_unregister(&db1x_pcmcia_socket_driver);
+}
+
+module_init(db1x_pcmcia_socket_load);
+module_exit(db1x_pcmcia_socket_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCMCIA Socket Services for Alchemy Db/Pb1x00 boards");
+MODULE_AUTHOR("Manuel Lauss");
diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c
new file mode 100644
index 0000000..61560cd
--- /dev/null
+++ b/drivers/pcmcia/xxs1500_ss.c
@@ -0,0 +1,350 @@
+/*
+ * PCMCIA socket code for the MyCable XXS1500 system.
+ *
+ * Copyright (c) 2009 Manuel Lauss <manuel.lauss@gmail.com>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/resource.h>
+#include <linux/spinlock.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/ss.h>
+#include <pcmcia/cistpl.h>
+
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define MEM_MAP_SIZE	0x400000
+#define IO_MAP_SIZE	0x1000
+
+
+/*
+ * 3.3V cards only; all interfacing is done via gpios:
+ *
+ * 0/1:  carddetect (00 = card present, xx = huh)
+ * 4:	 card irq
+ * 204:  reset (high-act)
+ * 205:  buffer enable (low-act)
+ * 208/209: card voltage key (00,01,10,11)
+ * 210:  battwarn
+ * 211:  batdead
+ * 214:  power (low-act)
+ */
+#define GPIO_CDA	0
+#define GPIO_CDB	1
+#define GPIO_CARDIRQ	4
+#define GPIO_RESET	204
+#define GPIO_OUTEN	205
+#define GPIO_VSL	208
+#define GPIO_VSH	209
+#define GPIO_BATTDEAD	210
+#define GPIO_BATTWARN	211
+#define GPIO_POWER	214
+
+struct xxs1500_pcmcia_sock {
+	struct pcmcia_socket	socket;
+	void		*virt_io;
+
+	phys_addr_t	phys_io;
+	phys_addr_t	phys_attr;
+	phys_addr_t	phys_mem;
+
+	/* previous flags for set_socket() */
+	unsigned int old_flags;
+};
+
+#define to_xxs_socket(x) container_of(x, struct xxs1500_pcmcia_sock, socket)
+
+static irqreturn_t cdirq(int irq, void *data)
+{
+	struct xxs1500_pcmcia_sock *sock = data;
+
+	pcmcia_parse_events(&sock->socket, SS_DETECT);
+
+	return IRQ_HANDLED;
+}
+
+static int xxs1500_pcmcia_configure(struct pcmcia_socket *skt,
+				    struct socket_state_t *state)
+{
+	struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
+	unsigned int changed;
+
+	/* power control */
+	switch (state->Vcc) {
+	case 0:
+		gpio_set_value(GPIO_POWER, 1);	/* power off */
+		break;
+	case 33:
+		gpio_set_value(GPIO_POWER, 0);	/* power on */
+		break;
+	case 50:
+	default:
+		return -EINVAL;
+	}
+
+	changed = state->flags ^ sock->old_flags;
+
+	if (changed & SS_RESET) {
+		if (state->flags & SS_RESET) {
+			gpio_set_value(GPIO_RESET, 1);	/* assert reset */
+			gpio_set_value(GPIO_OUTEN, 1);	/* buffers off */
+		} else {
+			gpio_set_value(GPIO_RESET, 0);	/* deassert reset */
+			gpio_set_value(GPIO_OUTEN, 0);	/* buffers on */
+			msleep(500);
+		}
+	}
+
+	sock->old_flags = state->flags;
+
+	return 0;
+}
+
+static int xxs1500_pcmcia_get_status(struct pcmcia_socket *skt,
+				     unsigned int *value)
+{
+	unsigned int status;
+	int i;
+
+	status = 0;
+
+	/* check carddetects: GPIO[0:1] must both be low */
+	if (!gpio_get_value(GPIO_CDA) && !gpio_get_value(GPIO_CDB))
+		status |= SS_DETECT;
+
+	/* determine card voltage: GPIO[208:209] binary value */
+	i = (!!gpio_get_value(GPIO_VSL)) | ((!!gpio_get_value(GPIO_VSH)) << 1);
+
+	switch (i) {
+	case 0:
+	case 1:
+	case 2:
+		status |= SS_3VCARD;	/* 3V card */
+		break;
+	case 3:				/* 5V card, unsupported */
+	default:
+		status |= SS_XVCARD;	/* treated as unsupported in core */
+	}
+
+	/* GPIO214: low active power switch */
+	status |= gpio_get_value(GPIO_POWER) ? 0 : SS_POWERON;
+
+	/* GPIO204: high-active reset line */
+	status |= gpio_get_value(GPIO_RESET) ? SS_RESET : SS_READY;
+
+	/* other stuff */
+	status |= gpio_get_value(GPIO_BATTDEAD) ? 0 : SS_BATDEAD;
+	status |= gpio_get_value(GPIO_BATTWARN) ? 0 : SS_BATWARN;
+
+	*value = status;
+
+	return 0;
+}
+
+static int xxs1500_pcmcia_sock_init(struct pcmcia_socket *skt)
+{
+	gpio_direction_input(GPIO_CDA);
+	gpio_direction_input(GPIO_CDB);
+	gpio_direction_input(GPIO_VSL);
+	gpio_direction_input(GPIO_VSH);
+	gpio_direction_input(GPIO_BATTDEAD);
+	gpio_direction_input(GPIO_BATTWARN);
+	gpio_direction_output(GPIO_RESET, 1);	/* assert reset */
+	gpio_direction_output(GPIO_OUTEN, 1);	/* disable buffers */
+	gpio_direction_output(GPIO_POWER, 1);	/* power off */
+
+	return 0;
+}
+
+static int xxs1500_pcmcia_sock_suspend(struct pcmcia_socket *skt)
+{
+	return 0;
+}
+
+static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt,
+				    struct pccard_io_map *map)
+{
+	struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
+
+	map->start = (u32)sock->virt_io;
+	map->stop = map->start + IO_MAP_SIZE;
+
+	return 0;
+}
+
+static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt,
+				     struct pccard_mem_map *map)
+{
+	struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
+
+	if (map->flags & MAP_ATTRIB)
+		map->static_start = sock->phys_attr + map->card_start;
+	else
+		map->static_start = sock->phys_mem + map->card_start;
+
+	return 0;
+}
+
+static struct pccard_operations xxs1500_pcmcia_operations = {
+	.init			= xxs1500_pcmcia_sock_init,
+	.suspend		= xxs1500_pcmcia_sock_suspend,
+	.get_status		= xxs1500_pcmcia_get_status,
+	.set_socket		= xxs1500_pcmcia_configure,
+	.set_io_map		= au1x00_pcmcia_set_io_map,
+	.set_mem_map		= au1x00_pcmcia_set_mem_map,
+};
+
+static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev)
+{
+	struct xxs1500_pcmcia_sock *sock;
+	struct resource *r;
+	int ret, irq;
+
+	sock = kzalloc(sizeof(struct xxs1500_pcmcia_sock), GFP_KERNEL);
+	if (!sock)
+		return -ENOMEM;
+
+	ret = -ENODEV;
+
+	/*
+	 * pseudo-attr:  The 32bit address of the PCMCIA attribute space
+	 * for this socket (usually the 36bit address shifted 4 to the
+	 * right).
+	 */
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
+	if (!r) {
+		dev_err(&pdev->dev, "missing 'pcmcia-attr' resource!\n");
+		goto out0;
+	}
+	sock->phys_attr = r->start;
+
+	/*
+	 * pseudo-mem:  The 32bit address of the PCMCIA memory space for
+	 * this socket (usually the 36bit address shifted 4 to the right)
+	 */
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
+	if (!r) {
+		dev_err(&pdev->dev, "missing 'pcmcia-mem' resource!\n");
+		goto out0;
+	}
+	sock->phys_mem = r->start;
+
+	/*
+	 * pseudo-io:  The 32bit address of the PCMCIA IO space for this
+	 * socket (usually the 36bit address shifted 4 to the right).
+	 */
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
+	if (!r) {
+		dev_err(&pdev->dev, "missing 'pcmcia-io' resource!\n");
+		goto out0;
+	}
+	sock->phys_io = r->start;
+
+
+	/*
+	 * PCMCIA client drivers use the inb/outb macros to access
+	 * the IO registers.  Since mips_io_port_base is added
+	 * to the access address of the mips implementation of
+	 * inb/outb, we need to subtract it here because we want
+	 * to access the I/O or MEM address directly, without
+	 * going through this "mips_io_port_base" mechanism.
+	 */
+	sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) -
+				 mips_io_port_base);
+
+	if (!sock->virt_io) {
+		dev_err(&pdev->dev, "cannot remap IO area\n");
+		ret = -ENOMEM;
+		goto out0;
+	}
+
+	sock->socket.ops	= &xxs1500_pcmcia_operations;
+	sock->socket.owner	= THIS_MODULE;
+	sock->socket.pci_irq	= gpio_to_irq(GPIO_CARDIRQ);
+	sock->socket.features	= SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+	sock->socket.map_size	= MEM_MAP_SIZE;
+	sock->socket.io_offset	= (unsigned long)sock->virt_io;
+	sock->socket.dev.parent	= &pdev->dev;
+	sock->socket.resource_ops = &pccard_static_ops;
+
+	platform_set_drvdata(pdev, sock);
+
+	/* setup carddetect irq: use one of the 2 GPIOs as an
+	 * edge detector.
+	 */
+	irq = gpio_to_irq(GPIO_CDA);
+	set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
+	ret = request_irq(irq, cdirq, 0, "pcmcia_carddetect", sock);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot setup cd irq\n");
+		goto out1;
+	}
+
+	ret = pcmcia_register_socket(&sock->socket);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register\n");
+		goto out2;
+	}
+
+	printk(KERN_INFO "MyCable XXS1500 PCMCIA socket services\n");
+
+	return 0;
+
+out2:
+	free_irq(gpio_to_irq(GPIO_CDA), sock);
+out1:
+	iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+out0:
+	kfree(sock);
+	return ret;
+}
+
+static int __devexit xxs1500_pcmcia_remove(struct platform_device *pdev)
+{
+	struct xxs1500_pcmcia_sock *sock = platform_get_drvdata(pdev);
+
+	pcmcia_unregister_socket(&sock->socket);
+	free_irq(gpio_to_irq(GPIO_CDA), sock);
+	iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+	kfree(sock);
+
+	return 0;
+}
+
+static struct platform_driver xxs1500_pcmcia_socket_driver = {
+	.driver	= {
+		.name	= "xxs1500_pcmcia",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= xxs1500_pcmcia_probe,
+	.remove		= __devexit_p(xxs1500_pcmcia_remove),
+};
+
+int __init xxs1500_pcmcia_socket_load(void)
+{
+	return platform_driver_register(&xxs1500_pcmcia_socket_driver);
+}
+
+void  __exit xxs1500_pcmcia_socket_unload(void)
+{
+	platform_driver_unregister(&xxs1500_pcmcia_socket_driver);
+}
+
+module_init(xxs1500_pcmcia_socket_load);
+module_exit(xxs1500_pcmcia_socket_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCMCIA Socket Services for MyCable XXS1500 systems");
+MODULE_AUTHOR("Manuel Lauss");
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index e9b15c3..a81ff7b 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1217,12 +1217,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	}
 #endif
 
-#ifdef CONFIG_SERIAL_8250_AU1X00
-	/* if access method is AU, it is a 16550 with a quirk */
-	if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
-		up->bugs |= UART_BUG_NOMSR;
-#endif
-
 	serial_outp(up, UART_LCR, save_lcr);
 
 	if (up->capabilities != uart_config[up->port.type].flags) {
@@ -2428,7 +2422,7 @@ serial8250_pm(struct uart_port *port, unsigned int state,
 static unsigned int serial8250_port_size(struct uart_8250_port *pt)
 {
 	if (pt->port.iotype == UPIO_AU)
-		return 0x100000;
+		return 0x1000;
 #ifdef CONFIG_ARCH_OMAP
 	if (is_omap_port(pt))
 		return 0x16 << pt->port.regshift;
@@ -2585,6 +2579,13 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 
 	if (flags & UART_CONFIG_TYPE)
 		autoconfig(up, probeflags);
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+	/* if access method is AU, it is a 16550 with a quirk */
+	if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
+		up->bugs |= UART_BUG_NOMSR;
+#endif
+
 	if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
 		autoconfig_irq(up);
 
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index cfd5ff9..ba8ac4f 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -412,11 +412,13 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
 	}
 
 	/* put buffers on the ring */
-	res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, hw->rx, t->len);
+	res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, virt_to_phys(hw->rx),
+				    t->len, DDMA_FLAGS_IE);
 	if (!res)
 		dev_err(hw->dev, "rx dma put dest error\n");
 
-	res = au1xxx_dbdma_put_source(hw->dma_tx_ch, (void *)hw->tx, t->len);
+	res = au1xxx_dbdma_put_source(hw->dma_tx_ch, virt_to_phys(hw->tx),
+				      t->len, DDMA_FLAGS_IE);
 	if (!res)
 		dev_err(hw->dev, "tx dma put source error\n");
 
diff --git a/drivers/staging/octeon/Makefile b/drivers/staging/octeon/Makefile
index c0a583c..87447c1 100644
--- a/drivers/staging/octeon/Makefile
+++ b/drivers/staging/octeon/Makefile
@@ -14,7 +14,6 @@ obj-${CONFIG_OCTEON_ETHERNET} :=  octeon-ethernet.o
 octeon-ethernet-objs := ethernet.o
 octeon-ethernet-objs += ethernet-mdio.o
 octeon-ethernet-objs += ethernet-mem.o
-octeon-ethernet-objs += ethernet-proc.o
 octeon-ethernet-objs += ethernet-rgmii.o
 octeon-ethernet-objs += ethernet-rx.o
 octeon-ethernet-objs += ethernet-sgmii.o
diff --git a/drivers/staging/octeon/ethernet-defines.h b/drivers/staging/octeon/ethernet-defines.h
index f13131b..6a2cd50 100644
--- a/drivers/staging/octeon/ethernet-defines.h
+++ b/drivers/staging/octeon/ethernet-defines.h
@@ -41,17 +41,10 @@
  *      Tells the driver to populate the packet buffers with kernel skbuffs.
  *      This allows the driver to receive packets without copying them. It also
  *      means that 32bit userspace can't access the packet buffers.
- *  USE_32BIT_SHARED
- *      This define tells the driver to allocate memory for buffers from the
- *      32bit sahred region instead of the kernel memory space.
  *  USE_HW_TCPUDP_CHECKSUM
  *      Controls if the Octeon TCP/UDP checksum engine is used for packet
  *      output. If this is zero, the kernel will perform the checksum in
  *      software.
- *  USE_MULTICORE_RECEIVE
- *      Process receive interrupts on multiple cores. This spreads the network
- *      load across the first 8 processors. If ths is zero, only one core
- *      processes incomming packets.
  *  USE_ASYNC_IOBDMA
  *      Use asynchronous IO access to hardware. This uses Octeon's asynchronous
  *      IOBDMAs to issue IO accesses without stalling. Set this to zero
@@ -75,29 +68,15 @@
 #define CONFIG_CAVIUM_RESERVE32 0
 #endif
 
-#if CONFIG_CAVIUM_RESERVE32
-#define USE_32BIT_SHARED            1
-#define USE_SKBUFFS_IN_HW           0
-#define REUSE_SKBUFFS_WITHOUT_FREE  0
-#else
-#define USE_32BIT_SHARED            0
 #define USE_SKBUFFS_IN_HW           1
 #ifdef CONFIG_NETFILTER
 #define REUSE_SKBUFFS_WITHOUT_FREE  0
 #else
 #define REUSE_SKBUFFS_WITHOUT_FREE  1
 #endif
-#endif
-
-/* Max interrupts per second per core */
-#define INTERRUPT_LIMIT             10000
 
-/* Don't limit the number of interrupts */
-/*#define INTERRUPT_LIMIT             0     */
 #define USE_HW_TCPUDP_CHECKSUM      1
 
-#define USE_MULTICORE_RECEIVE       1
-
 /* Enable Random Early Dropping under load */
 #define USE_RED                     1
 #define USE_ASYNC_IOBDMA            (CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0)
@@ -115,21 +94,12 @@
 /* Use this to not have FPA frees control L2 */
 /*#define DONT_WRITEBACK(x)         0   */
 
-/* Maximum number of packets to process per interrupt. */
-#define MAX_RX_PACKETS 120
 /* Maximum number of SKBs to try to free per xmit packet. */
-#define MAX_SKB_TO_FREE 10
 #define MAX_OUT_QUEUE_DEPTH 1000
 
-#ifndef CONFIG_SMP
-#undef USE_MULTICORE_RECEIVE
-#define USE_MULTICORE_RECEIVE 0
-#endif
-
-#define IP_PROTOCOL_TCP             6
-#define IP_PROTOCOL_UDP             0x11
+#define FAU_TOTAL_TX_TO_CLEAN (CVMX_FAU_REG_END - sizeof(uint32_t))
+#define FAU_NUM_PACKET_BUFFERS_TO_FREE (FAU_TOTAL_TX_TO_CLEAN - sizeof(uint32_t))
 
-#define FAU_NUM_PACKET_BUFFERS_TO_FREE (CVMX_FAU_REG_END - sizeof(uint32_t))
 #define TOTAL_NUMBER_OF_PORTS       (CVMX_PIP_NUM_INPUT_PORTS+1)
 
 
diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index 05a5cc0..7e0be8d 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -96,11 +96,11 @@ const struct ethtool_ops cvm_oct_ethtool_ops = {
 };
 
 /**
- * IOCTL support for PHY control
- *
+ * cvm_oct_ioctl - IOCTL support for PHY control
  * @dev:    Device to change
  * @rq:     the request
  * @cmd:    the command
+ *
  * Returns Zero on success
  */
 int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
@@ -153,7 +153,7 @@ static void cvm_oct_adjust_link(struct net_device *dev)
 
 
 /**
- * Setup the PHY
+ * cvm_oct_phy_setup_device - setup the PHY
  *
  * @dev:    Device to setup
  *
diff --git a/drivers/staging/octeon/ethernet-mdio.h b/drivers/staging/octeon/ethernet-mdio.h
index 55d0614a..a417d4f 100644
--- a/drivers/staging/octeon/ethernet-mdio.h
+++ b/drivers/staging/octeon/ethernet-mdio.h
@@ -32,7 +32,6 @@
 #include <linux/ip.h>
 #include <linux/string.h>
 #include <linux/ethtool.h>
-#include <linux/mii.h>
 #include <linux/seq_file.h>
 #include <linux/proc_fs.h>
 #include <net/dst.h>
diff --git a/drivers/staging/octeon/ethernet-mem.c b/drivers/staging/octeon/ethernet-mem.c
index b595903..00cc91d 100644
--- a/drivers/staging/octeon/ethernet-mem.c
+++ b/drivers/staging/octeon/ethernet-mem.c
@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -26,8 +26,6 @@
 **********************************************************************/
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
-#include <linux/mii.h>
-#include <net/dst.h>
 
 #include <asm/octeon/octeon.h>
 
@@ -36,18 +34,19 @@
 #include "cvmx-fpa.h"
 
 /**
- * Fill the supplied hardware pool with skbuffs
- *
+ * cvm_oct_fill_hw_skbuff - fill the supplied hardware pool with skbuffs
  * @pool:     Pool to allocate an skbuff for
  * @size:     Size of the buffer needed for the pool
  * @elements: Number of buffers to allocate
+ *
+ * Returns the actual number of buffers allocated.
  */
 static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements)
 {
 	int freed = elements;
 	while (freed) {
 
-		struct sk_buff *skb = dev_alloc_skb(size + 128);
+		struct sk_buff *skb = dev_alloc_skb(size + 256);
 		if (unlikely(skb == NULL)) {
 			pr_warning
 			    ("Failed to allocate skb for hardware pool %d\n",
@@ -55,7 +54,7 @@ static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements)
 			break;
 		}
 
-		skb_reserve(skb, 128 - (((unsigned long)skb->data) & 0x7f));
+		skb_reserve(skb, 256 - (((unsigned long)skb->data) & 0x7f));
 		*(struct sk_buff **)(skb->data - sizeof(void *)) = skb;
 		cvmx_fpa_free(skb->data, pool, DONT_WRITEBACK(size / 128));
 		freed--;
@@ -64,8 +63,7 @@ static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements)
 }
 
 /**
- * Free the supplied hardware pool of skbuffs
- *
+ * cvm_oct_free_hw_skbuff- free hardware pool skbuffs
  * @pool:     Pool to allocate an skbuff for
  * @size:     Size of the buffer needed for the pool
  * @elements: Number of buffers to allocate
@@ -93,96 +91,76 @@ static void cvm_oct_free_hw_skbuff(int pool, int size, int elements)
 }
 
 /**
- * This function fills a hardware pool with memory. Depending
- * on the config defines, this memory might come from the
- * kernel or global 32bit memory allocated with
- * cvmx_bootmem_alloc.
- *
+ * cvm_oct_fill_hw_memory - fill a hardware pool with memory.
  * @pool:     Pool to populate
  * @size:     Size of each buffer in the pool
  * @elements: Number of buffers to allocate
+ *
+ * Returns the actual number of buffers allocated.
  */
 static int cvm_oct_fill_hw_memory(int pool, int size, int elements)
 {
 	char *memory;
+	char *fpa;
 	int freed = elements;
 
-	if (USE_32BIT_SHARED) {
-		extern uint64_t octeon_reserve32_memory;
-
-		memory =
-		    cvmx_bootmem_alloc_range(elements * size, 128,
-					     octeon_reserve32_memory,
-					     octeon_reserve32_memory +
-					     (CONFIG_CAVIUM_RESERVE32 << 20) -
-					     1);
-		if (memory == NULL)
-			panic("Unable to allocate %u bytes for FPA pool %d\n",
-			      elements * size, pool);
-
-		pr_notice("Memory range %p - %p reserved for "
-			  "hardware\n", memory,
-			  memory + elements * size - 1);
-
-		while (freed) {
-			cvmx_fpa_free(memory, pool, 0);
-			memory += size;
-			freed--;
-		}
-	} else {
-		while (freed) {
-			/* We need to force alignment to 128 bytes here */
-			memory = kmalloc(size + 127, GFP_ATOMIC);
-			if (unlikely(memory == NULL)) {
-				pr_warning("Unable to allocate %u bytes for "
-					   "FPA pool %d\n",
-				     elements * size, pool);
-				break;
-			}
-			memory = (char *)(((unsigned long)memory + 127) & -128);
-			cvmx_fpa_free(memory, pool, 0);
-			freed--;
+	while (freed) {
+		/*
+		 * FPA memory must be 128 byte aligned.  Since we are
+		 * aligning we need to save the original pointer so we
+		 * can feed it to kfree when the memory is returned to
+		 * the kernel.
+		 *
+		 * We allocate an extra 256 bytes to allow for
+		 * alignment and space for the original pointer saved
+		 * just before the block.
+		 */
+		memory = kmalloc(size + 256, GFP_ATOMIC);
+		if (unlikely(memory == NULL)) {
+			pr_warning("Unable to allocate %u bytes for FPA pool %d\n",
+				   elements * size, pool);
+			break;
 		}
+		fpa = (char *)(((unsigned long)memory + 256) & ~0x7fUL);
+		*((char **)fpa - 1) = memory;
+		cvmx_fpa_free(fpa, pool, 0);
+		freed--;
 	}
 	return elements - freed;
 }
 
 /**
- * Free memory previously allocated with cvm_oct_fill_hw_memory
- *
+ * cvm_oct_free_hw_memory - Free memory allocated by cvm_oct_fill_hw_memory
  * @pool:     FPA pool to free
  * @size:     Size of each buffer in the pool
  * @elements: Number of buffers that should be in the pool
  */
 static void cvm_oct_free_hw_memory(int pool, int size, int elements)
 {
-	if (USE_32BIT_SHARED) {
-		pr_warning("Warning: 32 shared memory is not freeable\n");
-	} else {
-		char *memory;
-		do {
-			memory = cvmx_fpa_alloc(pool);
-			if (memory) {
-				elements--;
-				kfree(phys_to_virt(cvmx_ptr_to_phys(memory)));
-			}
-		} while (memory);
+	char *memory;
+	char *fpa;
+	do {
+		fpa = cvmx_fpa_alloc(pool);
+		if (fpa) {
+			elements--;
+			fpa = (char *)phys_to_virt(cvmx_ptr_to_phys(fpa));
+			memory = *((char **)fpa - 1);
+			kfree(memory);
+		}
+	} while (fpa);
 
-		if (elements < 0)
-			pr_warning("Freeing of pool %u had too many "
-				   "buffers (%d)\n",
-			       pool, elements);
-		else if (elements > 0)
-			pr_warning("Warning: Freeing of pool %u is "
-				"missing %d buffers\n",
-			     pool, elements);
-	}
+	if (elements < 0)
+		pr_warning("Freeing of pool %u had too many buffers (%d)\n",
+			pool, elements);
+	else if (elements > 0)
+		pr_warning("Warning: Freeing of pool %u is missing %d buffers\n",
+			pool, elements);
 }
 
 int cvm_oct_mem_fill_fpa(int pool, int size, int elements)
 {
 	int freed;
-	if (USE_SKBUFFS_IN_HW)
+	if (USE_SKBUFFS_IN_HW && pool == CVMX_FPA_PACKET_POOL)
 		freed = cvm_oct_fill_hw_skbuff(pool, size, elements);
 	else
 		freed = cvm_oct_fill_hw_memory(pool, size, elements);
@@ -191,7 +169,7 @@ int cvm_oct_mem_fill_fpa(int pool, int size, int elements)
 
 void cvm_oct_mem_empty_fpa(int pool, int size, int elements)
 {
-	if (USE_SKBUFFS_IN_HW)
+	if (USE_SKBUFFS_IN_HW && pool == CVMX_FPA_PACKET_POOL)
 		cvm_oct_free_hw_skbuff(pool, size, elements);
 	else
 		cvm_oct_free_hw_memory(pool, size, elements);
diff --git a/drivers/staging/octeon/ethernet-proc.c b/drivers/staging/octeon/ethernet-proc.c
deleted file mode 100644
index 16308d4..0000000
--- a/drivers/staging/octeon/ethernet-proc.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/**********************************************************************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2007 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
-**********************************************************************/
-#include <linux/kernel.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-#include <net/dst.h>
-
-#include <asm/octeon/octeon.h>
-
-#include "octeon-ethernet.h"
-#include "ethernet-defines.h"
-
-#include "cvmx-helper.h"
-#include "cvmx-pip.h"
-
-/**
- * User is reading /proc/octeon_ethernet_stats
- *
- * @m:
- * @v:
- * Returns
- */
-static int cvm_oct_stats_show(struct seq_file *m, void *v)
-{
-	struct octeon_ethernet *priv;
-	int port;
-
-	for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) {
-
-		if (cvm_oct_device[port]) {
-			priv = netdev_priv(cvm_oct_device[port]);
-
-			seq_printf(m, "\nOcteon Port %d (%s)\n", port,
-				   cvm_oct_device[port]->name);
-			seq_printf(m,
-				   "rx_packets:             %12lu\t"
-				   "tx_packets:             %12lu\n",
-				   priv->stats.rx_packets,
-				   priv->stats.tx_packets);
-			seq_printf(m,
-				   "rx_bytes:               %12lu\t"
-				   "tx_bytes:               %12lu\n",
-				   priv->stats.rx_bytes, priv->stats.tx_bytes);
-			seq_printf(m,
-				   "rx_errors:              %12lu\t"
-				   "tx_errors:              %12lu\n",
-				   priv->stats.rx_errors,
-				   priv->stats.tx_errors);
-			seq_printf(m,
-				   "rx_dropped:             %12lu\t"
-				   "tx_dropped:             %12lu\n",
-				   priv->stats.rx_dropped,
-				   priv->stats.tx_dropped);
-			seq_printf(m,
-				   "rx_length_errors:       %12lu\t"
-				   "tx_aborted_errors:      %12lu\n",
-				   priv->stats.rx_length_errors,
-				   priv->stats.tx_aborted_errors);
-			seq_printf(m,
-				   "rx_over_errors:         %12lu\t"
-				   "tx_carrier_errors:      %12lu\n",
-				   priv->stats.rx_over_errors,
-				   priv->stats.tx_carrier_errors);
-			seq_printf(m,
-				   "rx_crc_errors:          %12lu\t"
-				   "tx_fifo_errors:         %12lu\n",
-				   priv->stats.rx_crc_errors,
-				   priv->stats.tx_fifo_errors);
-			seq_printf(m,
-				   "rx_frame_errors:        %12lu\t"
-				   "tx_heartbeat_errors:    %12lu\n",
-				   priv->stats.rx_frame_errors,
-				   priv->stats.tx_heartbeat_errors);
-			seq_printf(m,
-				   "rx_fifo_errors:         %12lu\t"
-				   "tx_window_errors:       %12lu\n",
-				   priv->stats.rx_fifo_errors,
-				   priv->stats.tx_window_errors);
-			seq_printf(m,
-				   "rx_missed_errors:       %12lu\t"
-				   "multicast:              %12lu\n",
-				   priv->stats.rx_missed_errors,
-				   priv->stats.multicast);
-		}
-	}
-
-	return 0;
-}
-
-/**
- * /proc/octeon_ethernet_stats was openned. Use the single_open iterator
- *
- * @inode:
- * @file:
- * Returns
- */
-static int cvm_oct_stats_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, cvm_oct_stats_show, NULL);
-}
-
-static const struct file_operations cvm_oct_stats_operations = {
-	.open = cvm_oct_stats_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-
-void cvm_oct_proc_initialize(void)
-{
-	struct proc_dir_entry *entry =
-	    create_proc_entry("octeon_ethernet_stats", 0, NULL);
-	if (entry)
-		entry->proc_fops = &cvm_oct_stats_operations;
-}
-
-void cvm_oct_proc_shutdown(void)
-{
-	remove_proc_entry("octeon_ethernet_stats", NULL);
-}
diff --git a/drivers/staging/octeon/ethernet-proc.h b/drivers/staging/octeon/ethernet-proc.h
deleted file mode 100644
index 82c7d9f..0000000
--- a/drivers/staging/octeon/ethernet-proc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*********************************************************************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2007 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
-*********************************************************************/
-
-void cvm_oct_proc_initialize(void);
-void cvm_oct_proc_shutdown(void);
diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c
index 3820f1e..a0d4d4b 100644
--- a/drivers/staging/octeon/ethernet-rgmii.c
+++ b/drivers/staging/octeon/ethernet-rgmii.c
@@ -26,7 +26,7 @@
 **********************************************************************/
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
-#include <linux/mii.h>
+#include <linux/phy.h>
 #include <net/dst.h>
 
 #include <asm/octeon/octeon.h>
@@ -48,14 +48,20 @@ static int number_rgmii_ports;
 static void cvm_oct_rgmii_poll(struct net_device *dev)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	unsigned long flags;
+	unsigned long flags = 0;
 	cvmx_helper_link_info_t link_info;
+	int use_global_register_lock = (priv->phydev == NULL);
 
-	/*
-	 * Take the global register lock since we are going to touch
-	 * registers that affect more than one port.
-	 */
-	spin_lock_irqsave(&global_register_lock, flags);
+	BUG_ON(in_interrupt());
+	if (use_global_register_lock) {
+		/*
+		 * Take the global register lock since we are going to
+		 * touch registers that affect more than one port.
+		 */
+		spin_lock_irqsave(&global_register_lock, flags);
+	} else {
+		mutex_lock(&priv->phydev->bus->mdio_lock);
+	}
 
 	link_info = cvmx_helper_link_get(priv->port);
 	if (link_info.u64 == priv->link_info) {
@@ -115,7 +121,11 @@ static void cvm_oct_rgmii_poll(struct net_device *dev)
 				     dev->name);
 			}
 		}
-		spin_unlock_irqrestore(&global_register_lock, flags);
+
+		if (use_global_register_lock)
+			spin_unlock_irqrestore(&global_register_lock, flags);
+		else
+			mutex_unlock(&priv->phydev->bus->mdio_lock);
 		return;
 	}
 
@@ -151,7 +161,12 @@ static void cvm_oct_rgmii_poll(struct net_device *dev)
 		link_info = cvmx_helper_link_autoconf(priv->port);
 		priv->link_info = link_info.u64;
 	}
-	spin_unlock_irqrestore(&global_register_lock, flags);
+
+	if (use_global_register_lock)
+		spin_unlock_irqrestore(&global_register_lock, flags);
+	else {
+		mutex_unlock(&priv->phydev->bus->mdio_lock);
+	}
 
 	if (priv->phydev == NULL) {
 		/* Tell core. */
@@ -213,8 +228,11 @@ static irqreturn_t cvm_oct_rgmii_rml_interrupt(int cpl, void *dev_id)
 				struct net_device *dev =
 				    cvm_oct_device[cvmx_helper_get_ipd_port
 						   (interface, index)];
-				if (dev)
-					cvm_oct_rgmii_poll(dev);
+				struct octeon_ethernet *priv = netdev_priv(dev);
+
+				if (dev && !atomic_read(&cvm_oct_poll_queue_stopping))
+					queue_work(cvm_oct_poll_queue, &priv->port_work);
+
 				gmx_rx_int_reg.u64 = 0;
 				gmx_rx_int_reg.s.phy_dupx = 1;
 				gmx_rx_int_reg.s.phy_link = 1;
@@ -252,8 +270,11 @@ static irqreturn_t cvm_oct_rgmii_rml_interrupt(int cpl, void *dev_id)
 				struct net_device *dev =
 				    cvm_oct_device[cvmx_helper_get_ipd_port
 						   (interface, index)];
-				if (dev)
-					cvm_oct_rgmii_poll(dev);
+				struct octeon_ethernet *priv = netdev_priv(dev);
+
+				if (dev && !atomic_read(&cvm_oct_poll_queue_stopping))
+					queue_work(cvm_oct_poll_queue, &priv->port_work);
+
 				gmx_rx_int_reg.u64 = 0;
 				gmx_rx_int_reg.s.phy_dupx = 1;
 				gmx_rx_int_reg.s.phy_link = 1;
@@ -302,6 +323,12 @@ int cvm_oct_rgmii_stop(struct net_device *dev)
 	return 0;
 }
 
+static void cvm_oct_rgmii_immediate_poll(struct work_struct *work)
+{
+	struct octeon_ethernet *priv = container_of(work, struct octeon_ethernet, port_work);
+	cvm_oct_rgmii_poll(cvm_oct_device[priv->port]);
+}
+
 int cvm_oct_rgmii_init(struct net_device *dev)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
@@ -309,7 +336,7 @@ int cvm_oct_rgmii_init(struct net_device *dev)
 
 	cvm_oct_common_init(dev);
 	dev->netdev_ops->ndo_stop(dev);
-
+	INIT_WORK(&priv->port_work, cvm_oct_rgmii_immediate_poll);
 	/*
 	 * Due to GMX errata in CN3XXX series chips, it is necessary
 	 * to take the link down immediately when the PHY changes
@@ -397,4 +424,5 @@ void cvm_oct_rgmii_uninit(struct net_device *dev)
 	number_rgmii_ports--;
 	if (number_rgmii_ports == 0)
 		free_irq(OCTEON_IRQ_RML, &number_rgmii_ports);
+	cancel_work_sync(&priv->port_work);
 }
diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
index 1b237b7..cb38f9e 100644
--- a/drivers/staging/octeon/ethernet-rx.c
+++ b/drivers/staging/octeon/ethernet-rx.c
@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -27,16 +27,14 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/cache.h>
+#include <linux/cpumask.h>
 #include <linux/netdevice.h>
 #include <linux/init.h>
 #include <linux/etherdevice.h>
 #include <linux/ip.h>
 #include <linux/string.h>
 #include <linux/prefetch.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
+#include <linux/smp.h>
 #include <net/dst.h>
 #ifdef CONFIG_XFRM
 #include <linux/xfrm.h>
@@ -48,8 +46,9 @@
 #include <asm/octeon/octeon.h>
 
 #include "ethernet-defines.h"
-#include "octeon-ethernet.h"
 #include "ethernet-mem.h"
+#include "ethernet-rx.h"
+#include "octeon-ethernet.h"
 #include "ethernet-util.h"
 
 #include "cvmx-helper.h"
@@ -61,62 +60,88 @@
 
 #include "cvmx-gmxx-defs.h"
 
-struct cvm_tasklet_wrapper {
-	struct tasklet_struct t;
-};
+struct cvm_napi_wrapper {
+	struct napi_struct napi;
+} ____cacheline_aligned_in_smp;
 
-/*
- * Aligning the tasklet_struct on cachline boundries seems to decrease
- * throughput even though in theory it would reduce contantion on the
- * cache lines containing the locks.
- */
+static struct cvm_napi_wrapper cvm_oct_napi[NR_CPUS] __cacheline_aligned_in_smp;
 
-static struct cvm_tasklet_wrapper cvm_oct_tasklet[NR_CPUS];
+struct cvm_oct_core_state {
+	int baseline_cores;
+	/*
+	 * The number of additional cores that could be processing
+	 * input packtes.
+	 */
+	atomic_t available_cores;
+	cpumask_t cpu_state;
+} ____cacheline_aligned_in_smp;
 
-/**
- * Interrupt handler. The interrupt occurs whenever the POW
- * transitions from 0->1 packets in our group.
- *
- * @cpl:
- * @dev_id:
- * @regs:
- * Returns
- */
-irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id)
+static struct cvm_oct_core_state core_state __cacheline_aligned_in_smp;
+
+static void cvm_oct_enable_napi(void *_)
 {
-	/* Acknowledge the interrupt */
-	if (INTERRUPT_LIMIT)
-		cvmx_write_csr(CVMX_POW_WQ_INT, 1 << pow_receive_group);
-	else
-		cvmx_write_csr(CVMX_POW_WQ_INT, 0x10001 << pow_receive_group);
-	preempt_disable();
-	tasklet_schedule(&cvm_oct_tasklet[smp_processor_id()].t);
-	preempt_enable();
-	return IRQ_HANDLED;
+	int cpu = smp_processor_id();
+	napi_schedule(&cvm_oct_napi[cpu].napi);
+}
+
+static void cvm_oct_enable_one_cpu(void)
+{
+	int v;
+	int cpu;
+
+	/* Check to see if more CPUs are available for receive processing... */
+	v = atomic_sub_if_positive(1, &core_state.available_cores);
+	if (v < 0)
+		return;
+
+	/* ... if a CPU is available, Turn on NAPI polling for that CPU.  */
+	for_each_online_cpu(cpu) {
+		if (!cpu_test_and_set(cpu, core_state.cpu_state)) {
+			v = smp_call_function_single(cpu, cvm_oct_enable_napi,
+						     NULL, 0);
+			if (v)
+				panic("Can't enable NAPI.");
+			break;
+		}
+	}
+}
+
+static void cvm_oct_no_more_work(void)
+{
+	int cpu = smp_processor_id();
+
+	/*
+	 * CPU zero is special.  It always has the irq enabled when
+	 * waiting for incoming packets.
+	 */
+	if (cpu == 0) {
+		enable_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group);
+		return;
+	}
+
+	cpu_clear(cpu, core_state.cpu_state);
+	atomic_add(1, &core_state.available_cores);
 }
 
-#ifdef CONFIG_NET_POLL_CONTROLLER
 /**
- * This is called when the kernel needs to manually poll the
- * device. For Octeon, this is simply calling the interrupt
- * handler. We actually poll all the devices, not just the
- * one supplied.
+ * cvm_oct_do_interrupt - interrupt handler.
+ *
+ * The interrupt occurs whenever the POW has packets in our group.
  *
- * @dev:    Device to poll. Unused
  */
-void cvm_oct_poll_controller(struct net_device *dev)
+static irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id)
 {
-	preempt_disable();
-	tasklet_schedule(&cvm_oct_tasklet[smp_processor_id()].t);
-	preempt_enable();
+	/* Disable the IRQ and start napi_poll. */
+	disable_irq_nosync(OCTEON_IRQ_WORKQ0 + pow_receive_group);
+	cvm_oct_enable_napi(NULL);
+
+	return IRQ_HANDLED;
 }
-#endif
 
 /**
- * This is called on receive errors, and determines if the packet
- * can be dropped early-on in cvm_oct_tasklet_rx().
- *
+ * cvm_oct_check_rcv_error - process receive errors
  * @work: Work queue entry pointing to the packet.
+ *
  * Returns Non-zero if the packet can be dropped, zero otherwise.
  */
 static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
@@ -199,19 +224,20 @@ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
 }
 
 /**
- * Tasklet function that is scheduled on a core when an interrupt occurs.
+ * cvm_oct_napi_poll - the NAPI poll function.
+ * @napi: The NAPI instance, or null if called from cvm_oct_poll_controller
+ * @budget: Maximum number of packets to receive.
  *
- * @unused:
+ * Returns the number of packets processed.
  */
-void cvm_oct_tasklet_rx(unsigned long unused)
+static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
 {
-	const int coreid = cvmx_get_core_num();
-	uint64_t old_group_mask;
-	uint64_t old_scratch;
-	int rx_count = 0;
-	int number_to_free;
-	int num_freed;
-	int packet_not_copied;
+	const int	coreid = cvmx_get_core_num();
+	uint64_t	old_group_mask;
+	uint64_t	old_scratch;
+	int		rx_count = 0;
+	int		did_work_request = 0;
+	int		packet_not_copied;
 
 	/* Prefetch cvm_oct_device since we know we need it soon */
 	prefetch(cvm_oct_device);
@@ -227,59 +253,63 @@ void cvm_oct_tasklet_rx(unsigned long unused)
 	cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(coreid),
 		       (old_group_mask & ~0xFFFFull) | 1 << pow_receive_group);
 
-	if (USE_ASYNC_IOBDMA)
+	if (USE_ASYNC_IOBDMA) {
 		cvmx_pow_work_request_async(CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT);
+		did_work_request = 1;
+	}
 
-	while (1) {
+	while (rx_count < budget) {
 		struct sk_buff *skb = NULL;
+		struct sk_buff **pskb = NULL;
 		int skb_in_hw;
 		cvmx_wqe_t *work;
 
-		if (USE_ASYNC_IOBDMA) {
+		if (USE_ASYNC_IOBDMA && did_work_request)
 			work = cvmx_pow_work_response_async(CVMX_SCR_SCRATCH);
-		} else {
-			if ((INTERRUPT_LIMIT == 0)
-			    || likely(rx_count < MAX_RX_PACKETS))
-				work =
-				    cvmx_pow_work_request_sync
-				    (CVMX_POW_NO_WAIT);
-			else
-				work = NULL;
-		}
+		else
+			work = cvmx_pow_work_request_sync(CVMX_POW_NO_WAIT);
+
 		prefetch(work);
-		if (work == NULL)
+		did_work_request = 0;
+		if (work == NULL) {
+			union cvmx_pow_wq_int wq_int;
+			wq_int.u64 = 0;
+			wq_int.s.iq_dis = 1 << pow_receive_group;
+			wq_int.s.wq_int = 1 << pow_receive_group;
+			cvmx_write_csr(CVMX_POW_WQ_INT, wq_int.u64);
 			break;
+		}
+		pskb = (struct sk_buff **)(cvm_oct_get_buffer_ptr(work->packet_ptr) - sizeof(void *));
+		prefetch(pskb);
 
-		/*
-		 * Limit each core to processing MAX_RX_PACKETS
-		 * packets without a break.  This way the RX can't
-		 * starve the TX task.
-		 */
-		if (USE_ASYNC_IOBDMA) {
-
-			if ((INTERRUPT_LIMIT == 0)
-			    || likely(rx_count < MAX_RX_PACKETS))
-				cvmx_pow_work_request_async_nocheck
-				    (CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT);
-			else {
-				cvmx_scratch_write64(CVMX_SCR_SCRATCH,
-						     0x8000000000000000ull);
-				cvmx_pow_tag_sw_null_nocheck();
-			}
+		if (USE_ASYNC_IOBDMA && rx_count < (budget - 1)) {
+			cvmx_pow_work_request_async_nocheck(CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT);
+			did_work_request = 1;
+		}
+
+		if (rx_count == 0) {
+			/*
+			 * First time through, see if there is enough
+			 * work waiting to merit waking another
+			 * CPU.
+			 */
+			union cvmx_pow_wq_int_cntx counts;
+			int backlog;
+			int cores_in_use = core_state.baseline_cores - atomic_read(&core_state.available_cores);
+			counts.u64 = cvmx_read_csr(CVMX_POW_WQ_INT_CNTX(pow_receive_group));
+			backlog = counts.s.iq_cnt + counts.s.ds_cnt;
+			if (backlog > budget * cores_in_use && napi != NULL)
+				cvm_oct_enable_one_cpu();
 		}
 
 		skb_in_hw = USE_SKBUFFS_IN_HW && work->word2.s.bufs == 1;
 		if (likely(skb_in_hw)) {
-			skb =
-			    *(struct sk_buff
-			      **)(cvm_oct_get_buffer_ptr(work->packet_ptr) -
-				  sizeof(void *));
+			skb = *pskb;
 			prefetch(&skb->head);
 			prefetch(&skb->len);
 		}
 		prefetch(cvm_oct_device[work->ipprt]);
 
-		rx_count++;
 		/* Immediately throw away all packets with receive errors */
 		if (unlikely(work->word2.snoip.rcv_error)) {
 			if (cvm_oct_check_rcv_error(work))
@@ -292,39 +322,27 @@ void cvm_oct_tasklet_rx(unsigned long unused)
 		 * buffer.
 		 */
 		if (likely(skb_in_hw)) {
-			/*
-			 * This calculation was changed in case the
-			 * skb header is using a different address
-			 * aliasing type than the buffer. It doesn't
-			 * make any differnece now, but the new one is
-			 * more correct.
-			 */
-			skb->data =
-			    skb->head + work->packet_ptr.s.addr -
-			    cvmx_ptr_to_phys(skb->head);
+			skb->data = skb->head + work->packet_ptr.s.addr - cvmx_ptr_to_phys(skb->head);
 			prefetch(skb->data);
 			skb->len = work->len;
 			skb_set_tail_pointer(skb, skb->len);
 			packet_not_copied = 1;
 		} else {
-
 			/*
 			 * We have to copy the packet. First allocate
 			 * an skbuff for it.
 			 */
 			skb = dev_alloc_skb(work->len);
 			if (!skb) {
-				DEBUGPRINT("Port %d failed to allocate "
-					   "skbuff, packet dropped\n",
-				     work->ipprt);
+				DEBUGPRINT("Port %d failed to allocate skbuff, packet dropped\n",
+					   work->ipprt);
 				cvm_oct_free_work(work);
 				continue;
 			}
 
 			/*
 			 * Check if we've received a packet that was
-			 * entirely stored in the work entry. This is
-			 * untested.
+			 * entirely stored in the work entry.
 			 */
 			if (unlikely(work->word2.s.bufs == 0)) {
 				uint8_t *ptr = work->packet_data;
@@ -343,15 +361,13 @@ void cvm_oct_tasklet_rx(unsigned long unused)
 				/* No packet buffers to free */
 			} else {
 				int segments = work->word2.s.bufs;
-				union cvmx_buf_ptr segment_ptr =
-					work->packet_ptr;
+				union cvmx_buf_ptr segment_ptr = work->packet_ptr;
 				int len = work->len;
 
 				while (segments--) {
 					union cvmx_buf_ptr next_ptr =
-					    *(union cvmx_buf_ptr *)
-					    cvmx_phys_to_ptr(segment_ptr.s.
-							     addr - 8);
+					    *(union cvmx_buf_ptr *)cvmx_phys_to_ptr(segment_ptr.s.addr - 8);
+
 			/*
 			 * Octeon Errata PKI-100: The segment size is
 			 * wrong. Until it is fixed, calculate the
@@ -361,22 +377,18 @@ void cvm_oct_tasklet_rx(unsigned long unused)
 			 * one: int segment_size =
 			 * segment_ptr.s.size;
 			 */
-					int segment_size =
-					    CVMX_FPA_PACKET_POOL_SIZE -
-					    (segment_ptr.s.addr -
-					     (((segment_ptr.s.addr >> 7) -
-					       segment_ptr.s.back) << 7));
-					/* Don't copy more than what is left
-					   in the packet */
+					int segment_size = CVMX_FPA_PACKET_POOL_SIZE -
+						(segment_ptr.s.addr - (((segment_ptr.s.addr >> 7) - segment_ptr.s.back) << 7));
+					/*
+					 * Don't copy more than what
+					 * is left in the packet.
+					 */
 					if (segment_size > len)
 						segment_size = len;
 					/* Copy the data into the packet */
 					memcpy(skb_put(skb, segment_size),
-					       cvmx_phys_to_ptr(segment_ptr.s.
-								addr),
+					       cvmx_phys_to_ptr(segment_ptr.s.addr),
 					       segment_size);
-					/* Reduce the amount of bytes left
-					   to copy */
 					len -= segment_size;
 					segment_ptr = next_ptr;
 				}
@@ -389,16 +401,15 @@ void cvm_oct_tasklet_rx(unsigned long unused)
 			struct net_device *dev = cvm_oct_device[work->ipprt];
 			struct octeon_ethernet *priv = netdev_priv(dev);
 
-			/* Only accept packets for devices
-			   that are currently up */
+			/*
+			 * Only accept packets for devices that are
+			 * currently up.
+			 */
 			if (likely(dev->flags & IFF_UP)) {
 				skb->protocol = eth_type_trans(skb, dev);
 				skb->dev = dev;
 
-				if (unlikely
-				    (work->word2.s.not_IP
-				     || work->word2.s.IP_exc
-				     || work->word2.s.L4_error))
+				if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc || work->word2.s.L4_error))
 					skb->ip_summed = CHECKSUM_NONE;
 				else
 					skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -414,15 +425,13 @@ void cvm_oct_tasklet_rx(unsigned long unused)
 #endif
 				}
 				netif_receive_skb(skb);
+				rx_count++;
 			} else {
+				/* Drop any packet received for a device that isn't up */
 				/*
-				 * Drop any packet received for a
-				 * device that isn't up.
-				 */
-				/*
-				   DEBUGPRINT("%s: Device not up, packet dropped\n",
-				   dev->name);
-				 */
+				DEBUGPRINT("%s: Device not up, packet dropped\n",
+					   dev->name);
+				*/
 #ifdef CONFIG_64BIT
 				atomic64_add(1, (atomic64_t *)&priv->stats.rx_dropped);
 #else
@@ -435,9 +444,8 @@ void cvm_oct_tasklet_rx(unsigned long unused)
 			 * Drop any packet received for a device that
 			 * doesn't exist.
 			 */
-			DEBUGPRINT("Port %d not controlled by Linux, packet "
-				   "dropped\n",
-			     work->ipprt);
+			DEBUGPRINT("Port %d not controlled by Linux, packet dropped\n",
+				   work->ipprt);
 			dev_kfree_skb_irq(skb);
 		}
 		/*
@@ -459,47 +467,93 @@ void cvm_oct_tasklet_rx(unsigned long unused)
 			cvm_oct_free_work(work);
 		}
 	}
-
 	/* Restore the original POW group mask */
 	cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(coreid), old_group_mask);
 	if (USE_ASYNC_IOBDMA) {
 		/* Restore the scratch area */
 		cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
 	}
+	cvm_oct_rx_refill_pool(0);
 
-	if (USE_SKBUFFS_IN_HW) {
-		/* Refill the packet buffer pool */
-		number_to_free =
-		    cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
-
-		if (number_to_free > 0) {
-			cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE,
-					      -number_to_free);
-			num_freed =
-			    cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL,
-						 CVMX_FPA_PACKET_POOL_SIZE,
-						 number_to_free);
-			if (num_freed != number_to_free) {
-				cvmx_fau_atomic_add32
-				    (FAU_NUM_PACKET_BUFFERS_TO_FREE,
-				     number_to_free - num_freed);
-			}
-		}
+	if (rx_count < budget && napi != NULL) {
+		/* No more work */
+		napi_complete(napi);
+		cvm_oct_no_more_work();
 	}
+	return rx_count;
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * cvm_oct_poll_controller - poll for receive packets
+ * device.
+ *
+ * @dev:    Device to poll. Unused
+ */
+void cvm_oct_poll_controller(struct net_device *dev)
+{
+	cvm_oct_napi_poll(NULL, 16);
+}
+#endif
+
 void cvm_oct_rx_initialize(void)
 {
 	int i;
-	/* Initialize all of the tasklets */
-	for (i = 0; i < NR_CPUS; i++)
-		tasklet_init(&cvm_oct_tasklet[i].t, cvm_oct_tasklet_rx, 0);
+	struct net_device *dev_for_napi = NULL;
+	union cvmx_pow_wq_int_thrx int_thr;
+	union cvmx_pow_wq_int_pc int_pc;
+
+	for (i = 0; i < TOTAL_NUMBER_OF_PORTS; i++) {
+		if (cvm_oct_device[i]) {
+			dev_for_napi = cvm_oct_device[i];
+			break;
+		}
+	}
+
+	if (NULL == dev_for_napi)
+		panic("No net_devices were allocated.");
+
+	if (max_rx_cpus > 1  && max_rx_cpus < num_online_cpus())
+		atomic_set(&core_state.available_cores, max_rx_cpus);
+	else
+		atomic_set(&core_state.available_cores, num_online_cpus());
+	core_state.baseline_cores = atomic_read(&core_state.available_cores);
+
+	core_state.cpu_state = CPU_MASK_NONE;
+	for_each_possible_cpu(i) {
+		netif_napi_add(dev_for_napi, &cvm_oct_napi[i].napi,
+			       cvm_oct_napi_poll, rx_napi_weight);
+		napi_enable(&cvm_oct_napi[i].napi);
+	}
+	/* Register an IRQ hander for to receive POW interrupts */
+	i = request_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group,
+			cvm_oct_do_interrupt, 0, "Ethernet", cvm_oct_device);
+
+	if (i)
+		panic("Could not acquire Ethernet IRQ %d\n",
+		      OCTEON_IRQ_WORKQ0 + pow_receive_group);
+
+	disable_irq_nosync(OCTEON_IRQ_WORKQ0 + pow_receive_group);
+
+	int_thr.u64 = 0;
+	int_thr.s.tc_en = 1;
+	int_thr.s.tc_thr = 1;
+	/* Enable POW interrupt when our port has at least one packet */
+	cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), int_thr.u64);
+
+	int_pc.u64 = 0;
+	int_pc.s.pc_thr = 5;
+	cvmx_write_csr(CVMX_POW_WQ_INT_PC, int_pc.u64);
+
+
+	/* Scheduld NAPI now.  This will indirectly enable interrupts. */
+	cvm_oct_enable_one_cpu();
 }
 
 void cvm_oct_rx_shutdown(void)
 {
 	int i;
-	/* Shutdown all of the tasklets */
-	for (i = 0; i < NR_CPUS; i++)
-		tasklet_kill(&cvm_oct_tasklet[i].t);
+	/* Shutdown all of the NAPIs */
+	for_each_possible_cpu(i)
+		netif_napi_del(&cvm_oct_napi[i].napi);
 }
diff --git a/drivers/staging/octeon/ethernet-rx.h b/drivers/staging/octeon/ethernet-rx.h
index a9b72b8..a0743b8 100644
--- a/drivers/staging/octeon/ethernet-rx.h
+++ b/drivers/staging/octeon/ethernet-rx.h
@@ -24,10 +24,29 @@
  * This file may also be available under a different license from Cavium.
  * Contact Cavium Networks for more information
 *********************************************************************/
+#include "cvmx-fau.h"
 
-irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id);
 void cvm_oct_poll_controller(struct net_device *dev);
-void cvm_oct_tasklet_rx(unsigned long unused);
-
 void cvm_oct_rx_initialize(void);
 void cvm_oct_rx_shutdown(void);
+
+static inline void cvm_oct_rx_refill_pool(int fill_threshold)
+{
+	int number_to_free;
+	int num_freed;
+	/* Refill the packet buffer pool */
+	number_to_free =
+		cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
+
+	if (number_to_free > fill_threshold) {
+		cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE,
+				      -number_to_free);
+		num_freed = cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL,
+						 CVMX_FPA_PACKET_POOL_SIZE,
+						 number_to_free);
+		if (num_freed != number_to_free) {
+			cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE,
+					number_to_free - num_freed);
+		}
+	}
+}
diff --git a/drivers/staging/octeon/ethernet-sgmii.c b/drivers/staging/octeon/ethernet-sgmii.c
index 6061d01..2d8589e 100644
--- a/drivers/staging/octeon/ethernet-sgmii.c
+++ b/drivers/staging/octeon/ethernet-sgmii.c
@@ -26,7 +26,6 @@
 **********************************************************************/
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
-#include <linux/mii.h>
 #include <net/dst.h>
 
 #include <asm/octeon/octeon.h>
diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c
index 00dc0f4..b58b897 100644
--- a/drivers/staging/octeon/ethernet-spi.c
+++ b/drivers/staging/octeon/ethernet-spi.c
@@ -26,7 +26,6 @@
 **********************************************************************/
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
-#include <linux/mii.h>
 #include <net/dst.h>
 
 #include <asm/octeon/octeon.h>
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index 5352941..afc2b73 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -31,10 +31,6 @@
 #include <linux/etherdevice.h>
 #include <linux/ip.h>
 #include <linux/string.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
 #include <net/dst.h>
 #ifdef CONFIG_XFRM
 #include <linux/xfrm.h>
@@ -52,11 +48,14 @@
 
 #include "cvmx-wqe.h"
 #include "cvmx-fau.h"
+#include "cvmx-pip.h"
 #include "cvmx-pko.h"
 #include "cvmx-helper.h"
 
 #include "cvmx-gmxx-defs.h"
 
+#define CVM_OCT_SKB_CB(skb)	((u64 *)((skb)->cb))
+
 /*
  * You can define GET_SKBUFF_QOS() to override how the skbuff output
  * function determines which output queue is used. The default
@@ -68,12 +67,81 @@
 #define GET_SKBUFF_QOS(skb) 0
 #endif
 
+static void cvm_oct_tx_do_cleanup(unsigned long arg);
+static DECLARE_TASKLET(cvm_oct_tx_cleanup_tasklet, cvm_oct_tx_do_cleanup, 0);
+
+/* Maximum number of SKBs to try to free per xmit packet. */
+#define MAX_SKB_TO_FREE (MAX_OUT_QUEUE_DEPTH * 2)
+
+static inline int32_t cvm_oct_adjust_skb_to_free(int32_t skb_to_free, int fau)
+{
+	int32_t undo;
+	undo = skb_to_free > 0 ? MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
+	if (undo > 0)
+		cvmx_fau_atomic_add32(fau, -undo);
+	skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ? MAX_SKB_TO_FREE : -skb_to_free;
+	return skb_to_free;
+}
+
+static void cvm_oct_kick_tx_poll_watchdog(void)
+{
+	union cvmx_ciu_timx ciu_timx;
+	ciu_timx.u64 = 0;
+	ciu_timx.s.one_shot = 1;
+	ciu_timx.s.len = cvm_oct_tx_poll_interval;
+	cvmx_write_csr(CVMX_CIU_TIMX(1), ciu_timx.u64);
+}
+
+void cvm_oct_free_tx_skbs(struct net_device *dev)
+{
+	int32_t skb_to_free;
+	int qos, queues_per_port;
+	int total_freed = 0;
+	int total_remaining = 0;
+	unsigned long flags;
+	struct octeon_ethernet *priv = netdev_priv(dev);
+
+	queues_per_port = cvmx_pko_get_num_queues(priv->port);
+	/* Drain any pending packets in the free list */
+	for (qos = 0; qos < queues_per_port; qos++) {
+		if (skb_queue_len(&priv->tx_free_list[qos]) == 0)
+			continue;
+		skb_to_free = cvmx_fau_fetch_and_add32(priv->fau+qos*4, MAX_SKB_TO_FREE);
+		skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau+qos*4);
+
+
+		total_freed += skb_to_free;
+		if (skb_to_free > 0) {
+			struct sk_buff *to_free_list = NULL;
+			spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+			while (skb_to_free > 0) {
+				struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]);
+				t->next = to_free_list;
+				to_free_list = t;
+				skb_to_free--;
+			}
+			spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
+			/* Do the actual freeing outside of the lock. */
+			while (to_free_list) {
+				struct sk_buff *t = to_free_list;
+				to_free_list = to_free_list->next;
+				dev_kfree_skb_any(t);
+			}
+		}
+		total_remaining += skb_queue_len(&priv->tx_free_list[qos]);
+	}
+	if (total_freed >= 0 && netif_queue_stopped(dev))
+		netif_wake_queue(dev);
+	if (total_remaining)
+		cvm_oct_kick_tx_poll_watchdog();
+}
+
 /**
- * Packet transmit
- *
+ * cvm_oct_xmit - transmit a packet
  * @skb:    Packet to send
  * @dev:    Device info structure
- * Returns Always returns zero
+ *
+ * Returns Always returns NETDEV_TX_OK
  */
 int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 {
@@ -81,13 +149,15 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 	union cvmx_buf_ptr hw_buffer;
 	uint64_t old_scratch;
 	uint64_t old_scratch2;
-	int dropped;
 	int qos;
-	int queue_it_up;
+	int i;
+	enum {QUEUE_CORE, QUEUE_HW, QUEUE_DROP} queue_type;
 	struct octeon_ethernet *priv = netdev_priv(dev);
+	struct sk_buff *to_free_list;
 	int32_t skb_to_free;
-	int32_t undo;
 	int32_t buffers_to_free;
+	u32 total_to_clean;
+	unsigned long flags;
 #if REUSE_SKBUFFS_WITHOUT_FREE
 	unsigned char *fpa_head;
 #endif
@@ -98,9 +168,6 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 	 */
 	prefetch(priv);
 
-	/* Start off assuming no drop */
-	dropped = 0;
-
 	/*
 	 * The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to
 	 * completely remove "qos" in the event neither interface
@@ -135,6 +202,28 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	/*
+	 * We have space for 6 segment pointers, If there will be more
+	 * than that, we must linearize.
+	 */
+	if (unlikely(skb_shinfo(skb)->nr_frags > 5)) {
+		if (unlikely(__skb_linearize(skb))) {
+			queue_type = QUEUE_DROP;
+			if (USE_ASYNC_IOBDMA) {
+				/* Get the number of skbuffs in use by the hardware */
+				CVMX_SYNCIOBDMA;
+				skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
+			} else {
+				/* Get the number of skbuffs in use by the hardware */
+				skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
+								       MAX_SKB_TO_FREE);
+			}
+			skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau + qos * 4);
+			spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+			goto skip_xmit;
+		}
+	}
+
+	/*
 	 * The CN3XXX series of parts has an errata (GMX-401) which
 	 * causes the GMX block to hang if a collision occurs towards
 	 * the end of a <68 byte packet. As a workaround for this, we
@@ -162,13 +251,6 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 		}
 	}
 
-	/* Build the PKO buffer pointer */
-	hw_buffer.u64 = 0;
-	hw_buffer.s.addr = cvmx_ptr_to_phys(skb->data);
-	hw_buffer.s.pool = 0;
-	hw_buffer.s.size =
-	    (unsigned long)skb_end_pointer(skb) - (unsigned long)skb->head;
-
 	/* Build the PKO command */
 	pko_command.u64 = 0;
 	pko_command.s.n2 = 1;	/* Don't pollute L2 with the outgoing packet */
@@ -178,7 +260,31 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 	pko_command.s.subone0 = 1;
 
 	pko_command.s.dontfree = 1;
-	pko_command.s.reg0 = priv->fau + qos * 4;
+
+	/* Build the PKO buffer pointer */
+	hw_buffer.u64 = 0;
+	if (skb_shinfo(skb)->nr_frags == 0) {
+		hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+		hw_buffer.s.pool = 0;
+		hw_buffer.s.size = skb->len;
+	} else {
+		hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+		hw_buffer.s.pool = 0;
+		hw_buffer.s.size = skb_headlen(skb);
+		CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+			struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
+			hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset));
+			hw_buffer.s.size = fs->size;
+			CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
+		}
+		hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)CVM_OCT_SKB_CB(skb));
+		hw_buffer.s.size = skb_shinfo(skb)->nr_frags + 1;
+		pko_command.s.segs = skb_shinfo(skb)->nr_frags + 1;
+		pko_command.s.gather = 1;
+		goto dont_put_skbuff_in_hw;
+	}
+
 	/*
 	 * See if we can put this skb in the FPA pool. Any strange
 	 * behavior from the Linux networking stack will most likely
@@ -190,7 +296,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * shown a 25% increase in performance under some loads.
 	 */
 #if REUSE_SKBUFFS_WITHOUT_FREE
-	fpa_head = skb->head + 128 - ((unsigned long)skb->head & 0x7f);
+	fpa_head = skb->head + 256 - ((unsigned long)skb->head & 0x7f);
 	if (unlikely(skb->data < fpa_head)) {
 		/*
 		 * printk("TX buffer beginning can't meet FPA
@@ -248,10 +354,9 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * We can use this buffer in the FPA.  We don't need the FAU
 	 * update anymore
 	 */
-	pko_command.s.reg0 = 0;
 	pko_command.s.dontfree = 0;
 
-	hw_buffer.s.back = (skb->data - fpa_head) >> 7;
+	hw_buffer.s.back = ((unsigned long)skb->data >> 7) - ((unsigned long)fpa_head >> 7);
 	*(struct sk_buff **)(fpa_head - sizeof(void *)) = skb;
 
 	/*
@@ -272,16 +377,16 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 	skb->tc_verd = 0;
 #endif /* CONFIG_NET_CLS_ACT */
 #endif /* CONFIG_NET_SCHED */
+#endif /* REUSE_SKBUFFS_WITHOUT_FREE */
 
 dont_put_skbuff_in_hw:
-#endif /* REUSE_SKBUFFS_WITHOUT_FREE */
 
 	/* Check if we can use the hardware checksumming */
 	if (USE_HW_TCPUDP_CHECKSUM && (skb->protocol == htons(ETH_P_IP)) &&
 	    (ip_hdr(skb)->version == 4) && (ip_hdr(skb)->ihl == 5) &&
 	    ((ip_hdr(skb)->frag_off == 0) || (ip_hdr(skb)->frag_off == 1 << 14))
-	    && ((ip_hdr(skb)->protocol == IP_PROTOCOL_TCP)
-		|| (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP))) {
+	    && ((ip_hdr(skb)->protocol == IPPROTO_TCP)
+		|| (ip_hdr(skb)->protocol == IPPROTO_UDP))) {
 		/* Use hardware checksum calc */
 		pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1;
 	}
@@ -299,89 +404,116 @@ dont_put_skbuff_in_hw:
 		    cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
 	}
 
-	/*
-	 * We try to claim MAX_SKB_TO_FREE buffers.  If there were not
-	 * that many available, we have to un-claim (undo) any that
-	 * were in excess.  If skb_to_free is positive we will free
-	 * that many buffers.
-	 */
-	undo = skb_to_free > 0 ?
-		MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
-	if (undo > 0)
-		cvmx_fau_atomic_add32(priv->fau+qos*4, -undo);
-	skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ?
-		MAX_SKB_TO_FREE : -skb_to_free;
+	skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau+qos*4);
 
 	/*
 	 * If we're sending faster than the receive can free them then
 	 * don't do the HW free.
 	 */
-	if ((buffers_to_free < -100) && !pko_command.s.dontfree) {
+	if ((buffers_to_free < -100) && !pko_command.s.dontfree)
 		pko_command.s.dontfree = 1;
-		pko_command.s.reg0 = priv->fau + qos * 4;
+
+	if (pko_command.s.dontfree) {
+		queue_type = QUEUE_CORE;
+		pko_command.s.reg0 = priv->fau+qos*4;
+	} else {
+		queue_type = QUEUE_HW;
 	}
+	if (USE_ASYNC_IOBDMA)
+		cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH, FAU_TOTAL_TX_TO_CLEAN, 1);
 
-	cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
-				     CVMX_PKO_LOCK_CMD_QUEUE);
+	spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
 
 	/* Drop this packet if we have too many already queued to the HW */
-	if (unlikely
-	    (skb_queue_len(&priv->tx_free_list[qos]) >= MAX_OUT_QUEUE_DEPTH)) {
-		/*
-		   DEBUGPRINT("%s: Tx dropped. Too many queued\n", dev->name);
-		 */
-		dropped = 1;
+	if (unlikely(skb_queue_len(&priv->tx_free_list[qos]) >= MAX_OUT_QUEUE_DEPTH)) {
+		if (dev->tx_queue_len != 0) {
+			/* Drop the lock when notifying the core.  */
+			spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
+			netif_stop_queue(dev);
+			spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+		} else {
+			/* If not using normal queueing.  */
+			queue_type = QUEUE_DROP;
+			goto skip_xmit;
+		}
 	}
+
+	cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
+				     CVMX_PKO_LOCK_NONE);
+
 	/* Send the packet to the output queue */
-	else if (unlikely
-		 (cvmx_pko_send_packet_finish
-		  (priv->port, priv->queue + qos, pko_command, hw_buffer,
-		   CVMX_PKO_LOCK_CMD_QUEUE))) {
+	if (unlikely(cvmx_pko_send_packet_finish(priv->port,
+						 priv->queue + qos,
+						 pko_command, hw_buffer,
+						 CVMX_PKO_LOCK_NONE))) {
 		DEBUGPRINT("%s: Failed to send the packet\n", dev->name);
-		dropped = 1;
+		queue_type = QUEUE_DROP;
+	}
+skip_xmit:
+	to_free_list = NULL;
+
+	switch (queue_type) {
+	case QUEUE_DROP:
+		skb->next = to_free_list;
+		to_free_list = skb;
+		priv->stats.tx_dropped++;
+		break;
+	case QUEUE_HW:
+		cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, -1);
+		break;
+	case QUEUE_CORE:
+		__skb_queue_tail(&priv->tx_free_list[qos], skb);
+		break;
+	default:
+		BUG();
+	}
+
+	while (skb_to_free > 0) {
+		struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]);
+		t->next = to_free_list;
+		to_free_list = t;
+		skb_to_free--;
+	}
+
+	spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
+
+	/* Do the actual freeing outside of the lock. */
+	while (to_free_list) {
+		struct sk_buff *t = to_free_list;
+		to_free_list = to_free_list->next;
+		dev_kfree_skb_any(t);
 	}
 
 	if (USE_ASYNC_IOBDMA) {
+		CVMX_SYNCIOBDMA;
+		total_to_clean = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
 		/* Restore the scratch area */
 		cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
 		cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2);
-	}
-
-	queue_it_up = 0;
-	if (unlikely(dropped)) {
-		dev_kfree_skb_any(skb);
-		priv->stats.tx_dropped++;
 	} else {
-		if (USE_SKBUFFS_IN_HW) {
-			/* Put this packet on the queue to be freed later */
-			if (pko_command.s.dontfree)
-				queue_it_up = 1;
-			else
-				cvmx_fau_atomic_add32
-				    (FAU_NUM_PACKET_BUFFERS_TO_FREE, -1);
-		} else {
-			/* Put this packet on the queue to be freed later */
-			queue_it_up = 1;
-		}
+		total_to_clean = cvmx_fau_fetch_and_add32(FAU_TOTAL_TX_TO_CLEAN, 1);
 	}
 
-	if (queue_it_up) {
-		spin_lock(&priv->tx_free_list[qos].lock);
-		__skb_queue_tail(&priv->tx_free_list[qos], skb);
-		cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 0);
-		spin_unlock(&priv->tx_free_list[qos].lock);
-	} else {
-		cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 1);
+	if (total_to_clean & 0x3ff) {
+		/*
+		 * Schedule the cleanup tasklet every 1024 packets for
+		 * the pathological case of high traffic on one port
+		 * delaying clean up of packets on a different port
+		 * that is blocked waiting for the cleanup.
+		 */
+		tasklet_schedule(&cvm_oct_tx_cleanup_tasklet);
 	}
 
-	return 0;
+	cvm_oct_kick_tx_poll_watchdog();
+
+	return NETDEV_TX_OK;
 }
 
 /**
- * Packet transmit to the POW
- *
+ * cvm_oct_xmit_pow - transmit a packet to the POW
  * @skb:    Packet to send
  * @dev:    Device info structure
+
  * Returns Always returns zero
  */
 int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
@@ -459,8 +591,8 @@ int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
 		work->word2.s.dec_ipcomp = 0;	/* FIXME */
 #endif
 		work->word2.s.tcp_or_udp =
-		    (ip_hdr(skb)->protocol == IP_PROTOCOL_TCP)
-		    || (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP);
+		    (ip_hdr(skb)->protocol == IPPROTO_TCP)
+		    || (ip_hdr(skb)->protocol == IPPROTO_UDP);
 #if 0
 		/* FIXME */
 		work->word2.s.dec_ipsec = 0;
@@ -529,116 +661,63 @@ int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
 }
 
 /**
- * Transmit a work queue entry out of the ethernet port. Both
- * the work queue entry and the packet data can optionally be
- * freed. The work will be freed on error as well.
- *
- * @dev:     Device to transmit out.
- * @work_queue_entry:
- *                Work queue entry to send
- * @do_free: True if the work queue entry and packet data should be
- *                freed. If false, neither will be freed.
- * @qos:     Index into the queues for this port to transmit on. This
- *                is used to implement QoS if their are multiple queues per
- *                port. This parameter must be between 0 and the number of
- *                queues per port minus 1. Values outside of this range will
- *                be change to zero.
+ * cvm_oct_tx_shutdown_dev - free all skb that are currently queued for TX.
+ * @dev:    Device being shutdown
  *
- * Returns Zero on success, negative on failure.
  */
-int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
-			 int do_free, int qos)
+void cvm_oct_tx_shutdown_dev(struct net_device *dev)
 {
-	unsigned long flags;
-	union cvmx_buf_ptr hw_buffer;
-	cvmx_pko_command_word0_t pko_command;
-	int dropped;
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	cvmx_wqe_t *work = work_queue_entry;
+	unsigned long flags;
+	int qos;
 
-	if (!(dev->flags & IFF_UP)) {
-		DEBUGPRINT("%s: Device not up\n", dev->name);
-		if (do_free)
-			cvm_oct_free_work(work);
-		return -1;
+	for (qos = 0; qos < 16; qos++) {
+		spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+		while (skb_queue_len(&priv->tx_free_list[qos]))
+			dev_kfree_skb_any(__skb_dequeue
+					  (&priv->tx_free_list[qos]));
+		spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
 	}
+}
 
-	/* The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to completely
-	   remove "qos" in the event neither interface supports
-	   multiple queues per port */
-	if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) ||
-	    (CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) {
-		if (qos <= 0)
-			qos = 0;
-		else if (qos >= cvmx_pko_get_num_queues(priv->port))
-			qos = 0;
-	} else
-		qos = 0;
-
-	/* Start off assuming no drop */
-	dropped = 0;
-
-	local_irq_save(flags);
-	cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
-				     CVMX_PKO_LOCK_CMD_QUEUE);
-
-	/* Build the PKO buffer pointer */
-	hw_buffer.u64 = 0;
-	hw_buffer.s.addr = work->packet_ptr.s.addr;
-	hw_buffer.s.pool = CVMX_FPA_PACKET_POOL;
-	hw_buffer.s.size = CVMX_FPA_PACKET_POOL_SIZE;
-	hw_buffer.s.back = work->packet_ptr.s.back;
+static void cvm_oct_tx_do_cleanup(unsigned long arg)
+{
+	int port;
 
-	/* Build the PKO command */
-	pko_command.u64 = 0;
-	pko_command.s.n2 = 1;	/* Don't pollute L2 with the outgoing packet */
-	pko_command.s.dontfree = !do_free;
-	pko_command.s.segs = work->word2.s.bufs;
-	pko_command.s.total_bytes = work->len;
+	for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) {
+		if (cvm_oct_device[port]) {
+			struct net_device *dev = cvm_oct_device[port];
+			cvm_oct_free_tx_skbs(dev);
+		}
+	}
+}
 
-	/* Check if we can use the hardware checksumming */
-	if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc))
-		pko_command.s.ipoffp1 = 0;
-	else
-		pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1;
+static irqreturn_t cvm_oct_tx_cleanup_watchdog(int cpl, void *dev_id)
+{
+	/* Disable the interrupt.  */
+	cvmx_write_csr(CVMX_CIU_TIMX(1), 0);
+	/* Do the work in the tasklet.  */
+	tasklet_schedule(&cvm_oct_tx_cleanup_tasklet);
+	return IRQ_HANDLED;
+}
 
-	/* Send the packet to the output queue */
-	if (unlikely
-	    (cvmx_pko_send_packet_finish
-	     (priv->port, priv->queue + qos, pko_command, hw_buffer,
-	      CVMX_PKO_LOCK_CMD_QUEUE))) {
-		DEBUGPRINT("%s: Failed to send the packet\n", dev->name);
-		dropped = -1;
-	}
-	local_irq_restore(flags);
+void cvm_oct_tx_initialize(void)
+{
+	int i;
 
-	if (unlikely(dropped)) {
-		if (do_free)
-			cvm_oct_free_work(work);
-		priv->stats.tx_dropped++;
-	} else if (do_free)
-		cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, DONT_WRITEBACK(1));
+	/* Disable the interrupt.  */
+	cvmx_write_csr(CVMX_CIU_TIMX(1), 0);
+	/* Register an IRQ hander for to receive CIU_TIMX(1) interrupts */
+	i = request_irq(OCTEON_IRQ_TIMER1,
+			cvm_oct_tx_cleanup_watchdog, 0,
+			"Ethernet", cvm_oct_device);
 
-	return dropped;
+	if (i)
+		panic("Could not acquire Ethernet IRQ %d\n", OCTEON_IRQ_TIMER1);
 }
-EXPORT_SYMBOL(cvm_oct_transmit_qos);
 
-/**
- * This function frees all skb that are currently queued for TX.
- *
- * @dev:    Device being shutdown
- */
-void cvm_oct_tx_shutdown(struct net_device *dev)
+void cvm_oct_tx_shutdown(void)
 {
-	struct octeon_ethernet *priv = netdev_priv(dev);
-	unsigned long flags;
-	int qos;
-
-	for (qos = 0; qos < 16; qos++) {
-		spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
-		while (skb_queue_len(&priv->tx_free_list[qos]))
-			dev_kfree_skb_any(__skb_dequeue
-					  (&priv->tx_free_list[qos]));
-		spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
-	}
+	/* Free the interrupt handler */
+	free_irq(OCTEON_IRQ_TIMER1, cvm_oct_device);
 }
diff --git a/drivers/staging/octeon/ethernet-tx.h b/drivers/staging/octeon/ethernet-tx.h
index c0bebf7..547680c 100644
--- a/drivers/staging/octeon/ethernet-tx.h
+++ b/drivers/staging/octeon/ethernet-tx.h
@@ -29,29 +29,6 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev);
 int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev);
 int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
 			 int do_free, int qos);
-void cvm_oct_tx_shutdown(struct net_device *dev);
-
-/**
- * Free dead transmit skbs.
- *
- * @priv:		The driver data
- * @skb_to_free:	The number of SKBs to free (free none if negative).
- * @qos:		The queue to free from.
- * @take_lock:		If true, acquire the skb list lock.
- */
-static inline void cvm_oct_free_tx_skbs(struct octeon_ethernet *priv,
-					int skb_to_free,
-					int qos, int take_lock)
-{
-	/* Free skbuffs not in use by the hardware.  */
-	if (skb_to_free > 0) {
-		if (take_lock)
-			spin_lock(&priv->tx_free_list[qos].lock);
-		while (skb_to_free > 0) {
-			dev_kfree_skb(__skb_dequeue(&priv->tx_free_list[qos]));
-			skb_to_free--;
-		}
-		if (take_lock)
-			spin_unlock(&priv->tx_free_list[qos].lock);
-	}
-}
+void cvm_oct_tx_initialize(void);
+void cvm_oct_tx_shutdown(void);
+void cvm_oct_tx_shutdown_dev(struct net_device *dev);
diff --git a/drivers/staging/octeon/ethernet-util.h b/drivers/staging/octeon/ethernet-util.h
index 37b6659..2346756 100644
--- a/drivers/staging/octeon/ethernet-util.h
+++ b/drivers/staging/octeon/ethernet-util.h
@@ -30,10 +30,9 @@
 				} while (0)
 
 /**
- * Given a packet data address, return a pointer to the
- * beginning of the packet buffer.
- *
+ * cvm_oct_get_buffer_ptr - convert packet data address to pointer
  * @packet_ptr: Packet data hardware address
+ *
  * Returns Packet buffer pointer
  */
 static inline void *cvm_oct_get_buffer_ptr(union cvmx_buf_ptr packet_ptr)
@@ -43,9 +42,7 @@ static inline void *cvm_oct_get_buffer_ptr(union cvmx_buf_ptr packet_ptr)
 }
 
 /**
- * Given an IPD/PKO port number, return the logical interface it is
- * on.
- *
+ * INTERFACE - convert IPD port to locgical interface
  * @ipd_port: Port to check
  *
  * Returns Logical interface
@@ -65,9 +62,7 @@ static inline int INTERFACE(int ipd_port)
 }
 
 /**
- * Given an IPD/PKO port number, return the port's index on a
- * logical interface.
- *
+ * INDEX - convert IPD/PKO port number to the port's interface index
  * @ipd_port: Port to check
  *
  * Returns Index into interface port list
diff --git a/drivers/staging/octeon/ethernet-xaui.c b/drivers/staging/octeon/ethernet-xaui.c
index ee3dc41..3fca1cc 100644
--- a/drivers/staging/octeon/ethernet-xaui.c
+++ b/drivers/staging/octeon/ethernet-xaui.c
@@ -26,7 +26,6 @@
 **********************************************************************/
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
-#include <linux/mii.h>
 #include <net/dst.h>
 
 #include <asm/octeon/octeon.h>
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index 4cfd4b1..02b6367 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -29,7 +29,6 @@
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
-#include <linux/delay.h>
 #include <linux/phy.h>
 
 #include <net/dst.h>
@@ -43,8 +42,6 @@
 #include "ethernet-tx.h"
 #include "ethernet-mdio.h"
 #include "ethernet-util.h"
-#include "ethernet-proc.h"
-
 
 #include "cvmx-pip.h"
 #include "cvmx-pko.h"
@@ -104,13 +101,15 @@ MODULE_PARM_DESC(pow_send_list, "\n"
 	"\t\"eth2,spi3,spi7\" would cause these three devices to transmit\n"
 	"\tusing the pow_send_group.");
 
-static int disable_core_queueing = 1;
-module_param(disable_core_queueing, int, 0444);
-MODULE_PARM_DESC(disable_core_queueing, "\n"
-	"\tWhen set the networking core's tx_queue_len is set to zero.  This\n"
-	"\tallows packets to be sent without lock contention in the packet\n"
-	"\tscheduler resulting in some cases in improved throughput.\n");
+int max_rx_cpus = -1;
+module_param(max_rx_cpus, int, 0444);
+MODULE_PARM_DESC(max_rx_cpus, "\n"
+	"\t\tThe maximum number of CPUs to use for packet reception.\n"
+	"\t\tUse -1 to use all available CPUs.");
 
+int rx_napi_weight = 32;
+module_param(rx_napi_weight, int, 0444);
+MODULE_PARM_DESC(rx_napi_weight, "The NAPI WEIGHT parameter.");
 
 /*
  * The offset from mac_addr_base that should be used for the next port
@@ -122,9 +121,16 @@ MODULE_PARM_DESC(disable_core_queueing, "\n"
 static unsigned int cvm_oct_mac_addr_offset;
 
 /**
- * Periodic timer to check auto negotiation
+ * cvm_oct_poll_queue - Workqueue for polling operations.
+ */
+struct workqueue_struct *cvm_oct_poll_queue;
+
+/**
+ * cvm_oct_poll_queue_stopping - flag to indicate polling should stop.
+ *
+ * Set to one right before cvm_oct_poll_queue is destroyed.
  */
-static struct timer_list cvm_oct_poll_timer;
+atomic_t cvm_oct_poll_queue_stopping = ATOMIC_INIT(0);
 
 /**
  * Array of every ethernet device owned by this driver indexed by
@@ -132,65 +138,44 @@ static struct timer_list cvm_oct_poll_timer;
  */
 struct net_device *cvm_oct_device[TOTAL_NUMBER_OF_PORTS];
 
-/**
- * Periodic timer tick for slow management operations
- *
- * @arg:    Device to check
- */
-static void cvm_do_timer(unsigned long arg)
+u64 cvm_oct_tx_poll_interval;
+
+static void cvm_oct_rx_refill_worker(struct work_struct *work);
+static DECLARE_DELAYED_WORK(cvm_oct_rx_refill_work, cvm_oct_rx_refill_worker);
+
+static void cvm_oct_rx_refill_worker(struct work_struct *work)
 {
-	int32_t skb_to_free, undo;
-	int queues_per_port;
-	int qos;
-	struct octeon_ethernet *priv;
-	static int port;
+	/*
+	 * FPA 0 may have been drained, try to refill it if we need
+	 * more than num_packet_buffers / 2, otherwise normal receive
+	 * processing will refill it.  If it were drained, no packets
+	 * could be received so cvm_oct_napi_poll would never be
+	 * invoked to do the refill.
+	 */
+	cvm_oct_rx_refill_pool(num_packet_buffers / 2);
 
-	if (port >= CVMX_PIP_NUM_INPUT_PORTS) {
-		/*
-		 * All ports have been polled. Start the next
-		 * iteration through the ports in one second.
-		 */
-		port = 0;
-		mod_timer(&cvm_oct_poll_timer, jiffies + HZ);
-		return;
-	}
-	if (!cvm_oct_device[port])
-		goto out;
+	if (!atomic_read(&cvm_oct_poll_queue_stopping))
+		queue_delayed_work(cvm_oct_poll_queue,
+				   &cvm_oct_rx_refill_work, HZ);
+}
+
+static void cvm_oct_periodic_worker(struct work_struct *work)
+{
+	struct octeon_ethernet *priv = container_of(work,
+						    struct octeon_ethernet,
+						    port_periodic_work.work);
 
-	priv = netdev_priv(cvm_oct_device[port]);
 	if (priv->poll)
-		priv->poll(cvm_oct_device[port]);
-
-	queues_per_port = cvmx_pko_get_num_queues(port);
-	/* Drain any pending packets in the free list */
-	for (qos = 0; qos < queues_per_port; qos++) {
-		if (skb_queue_len(&priv->tx_free_list[qos]) == 0)
-			continue;
-		skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
-						       MAX_SKB_TO_FREE);
-		undo = skb_to_free > 0 ?
-			MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
-		if (undo > 0)
-			cvmx_fau_atomic_add32(priv->fau+qos*4, -undo);
-		skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ?
-			MAX_SKB_TO_FREE : -skb_to_free;
-		cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 1);
-	}
-	cvm_oct_device[port]->netdev_ops->ndo_get_stats(cvm_oct_device[port]);
+		priv->poll(cvm_oct_device[priv->port]);
 
-out:
-	port++;
-	/* Poll the next port in a 50th of a second.
-	   This spreads the polling of ports out a little bit */
-	mod_timer(&cvm_oct_poll_timer, jiffies + HZ / 50);
-}
+	cvm_oct_device[priv->port]->netdev_ops->ndo_get_stats(cvm_oct_device[priv->port]);
+
+	if (!atomic_read(&cvm_oct_poll_queue_stopping))
+		queue_delayed_work(cvm_oct_poll_queue, &priv->port_periodic_work, HZ);
+ }
 
-/**
- * Configure common hardware for all interfaces
- */
 static __init void cvm_oct_configure_common_hw(void)
 {
-	int r;
 	/* Setup the FPA */
 	cvmx_fpa_enable();
 	cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL, CVMX_FPA_PACKET_POOL_SIZE,
@@ -205,28 +190,13 @@ static __init void cvm_oct_configure_common_hw(void)
 		cvmx_helper_setup_red(num_packet_buffers / 4,
 				      num_packet_buffers / 8);
 
-	/* Enable the MII interface */
-	if (!octeon_is_simulation())
-		cvmx_write_csr(CVMX_SMIX_EN(0), 1);
-
-	/* Register an IRQ hander for to receive POW interrupts */
-	r = request_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group,
-			cvm_oct_do_interrupt, IRQF_SHARED, "Ethernet",
-			cvm_oct_device);
-
-#if defined(CONFIG_SMP) && 0
-	if (USE_MULTICORE_RECEIVE) {
-		irq_set_affinity(OCTEON_IRQ_WORKQ0 + pow_receive_group,
-				 cpu_online_mask);
-	}
-#endif
 }
 
 /**
- * Free a work queue entry received in a intercept callback.
+ * cvm_oct_free_work- Free a work queue entry
+ *
+ * @work_queue_entry: Work queue entry to free
  *
- * @work_queue_entry:
- *               Work queue entry to free
  * Returns Zero on success, Negative on failure.
  */
 int cvm_oct_free_work(void *work_queue_entry)
@@ -253,9 +223,9 @@ int cvm_oct_free_work(void *work_queue_entry)
 EXPORT_SYMBOL(cvm_oct_free_work);
 
 /**
- * Get the low level ethernet statistics
- *
+ * cvm_oct_common_get_stats - get the low level ethernet statistics
  * @dev:    Device to get the statistics from
+ *
  * Returns Pointer to the statistics
  */
 static struct net_device_stats *cvm_oct_common_get_stats(struct net_device *dev)
@@ -299,8 +269,7 @@ static struct net_device_stats *cvm_oct_common_get_stats(struct net_device *dev)
 }
 
 /**
- * Change the link MTU. Unimplemented
- *
+ * cvm_oct_common_change_mtu - change the link MTU
  * @dev:     Device to change
  * @new_mtu: The new MTU
  *
@@ -364,8 +333,7 @@ static int cvm_oct_common_change_mtu(struct net_device *dev, int new_mtu)
 }
 
 /**
- * Set the multicast list. Currently unimplemented.
- *
+ * cvm_oct_common_set_multicast_list - set the multicast list
  * @dev:    Device to work on
  */
 static void cvm_oct_common_set_multicast_list(struct net_device *dev)
@@ -420,10 +388,10 @@ static void cvm_oct_common_set_multicast_list(struct net_device *dev)
 }
 
 /**
- * Set the hardware MAC address for a device
- *
- * @dev:    Device to change the MAC address for
- * @addr:   Address structure to change it too. MAC address is addr + 2.
+ * cvm_oct_common_set_mac_address - set the hardware MAC address for a device
+ * @dev:    The device in question.
+ * @addr:   Address structure to change it too.
+
  * Returns Zero on success
  */
 static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr)
@@ -470,9 +438,9 @@ static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr)
 }
 
 /**
- * Per network device initialization
- *
+ * cvm_oct_common_init - per network device initialization
  * @dev:    Device to initialize
+ *
  * Returns Zero on success
  */
 int cvm_oct_common_init(struct net_device *dev)
@@ -510,8 +478,11 @@ int cvm_oct_common_init(struct net_device *dev)
 	    && (always_use_pow || strstr(pow_send_list, dev->name)))
 		priv->queue = -1;
 
-	if (priv->queue != -1 && USE_HW_TCPUDP_CHECKSUM)
-		dev->features |= NETIF_F_IP_CSUM;
+	if (priv->queue != -1) {
+		dev->features |= NETIF_F_SG;
+		if (USE_HW_TCPUDP_CHECKSUM)
+			dev->features |= NETIF_F_IP_CSUM;
+	}
 
 	/* We do our own locking, Linux doesn't need to */
 	dev->features |= NETIF_F_LLTX;
@@ -625,12 +596,6 @@ static const struct net_device_ops cvm_oct_pow_netdev_ops = {
 
 extern void octeon_mdiobus_force_mod_depencency(void);
 
-/**
- * Module/ driver initialization. Creates the linux network
- * devices.
- *
- * Returns Zero on success
- */
 static int __init cvm_oct_init_module(void)
 {
 	int num_interfaces;
@@ -648,8 +613,12 @@ static int __init cvm_oct_init_module(void)
 	else
 		cvm_oct_mac_addr_offset = 0;
 
-	cvm_oct_proc_initialize();
-	cvm_oct_rx_initialize();
+	cvm_oct_poll_queue = create_singlethread_workqueue("octeon-ethernet");
+	if (cvm_oct_poll_queue == NULL) {
+		pr_err("octeon-ethernet: Cannot create workqueue");
+		return -ENOMEM;
+	}
+
 	cvm_oct_configure_common_hw();
 
 	cvmx_helper_initialize_packet_io_global();
@@ -682,6 +651,9 @@ static int __init cvm_oct_init_module(void)
 	 */
 	cvmx_fau_atomic_write32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
 
+	/* Initialize the FAU used for counting tx SKBs that need to be freed */
+	cvmx_fau_atomic_write32(FAU_TOTAL_TX_TO_CLEAN, 0);
+
 	if ((pow_send_group != -1)) {
 		struct net_device *dev;
 		pr_info("\tConfiguring device for POW only access\n");
@@ -689,7 +661,6 @@ static int __init cvm_oct_init_module(void)
 		if (dev) {
 			/* Initialize the device private structure. */
 			struct octeon_ethernet *priv = netdev_priv(dev);
-			memset(priv, 0, sizeof(struct octeon_ethernet));
 
 			dev->netdev_ops = &cvm_oct_pow_netdev_ops;
 			priv->imode = CVMX_HELPER_INTERFACE_MODE_DISABLED;
@@ -700,19 +671,16 @@ static int __init cvm_oct_init_module(void)
 				skb_queue_head_init(&priv->tx_free_list[qos]);
 
 			if (register_netdev(dev) < 0) {
-				pr_err("Failed to register ethernet "
-					 "device for POW\n");
+				pr_err("Failed to register ethernet device for POW\n");
 				kfree(dev);
 			} else {
 				cvm_oct_device[CVMX_PIP_NUM_INPUT_PORTS] = dev;
-				pr_info("%s: POW send group %d, receive "
-					"group %d\n",
-				     dev->name, pow_send_group,
-				     pow_receive_group);
+				pr_info("%s: POW send group %d, receive group %d\n",
+					dev->name, pow_send_group,
+					pow_receive_group);
 			}
 		} else {
-			pr_err("Failed to allocate ethernet device "
-				 "for POW\n");
+			pr_err("Failed to allocate ethernet device for POW\n");
 		}
 	}
 
@@ -730,17 +698,15 @@ static int __init cvm_oct_init_module(void)
 			struct net_device *dev =
 			    alloc_etherdev(sizeof(struct octeon_ethernet));
 			if (!dev) {
-				pr_err("Failed to allocate ethernet device "
-					 "for port %d\n", port);
+				pr_err("Failed to allocate ethernet device for port %d\n", port);
 				continue;
 			}
-			if (disable_core_queueing)
-				dev->tx_queue_len = 0;
 
 			/* Initialize the device private structure. */
 			priv = netdev_priv(dev);
-			memset(priv, 0, sizeof(struct octeon_ethernet));
 
+			INIT_DELAYED_WORK(&priv->port_periodic_work,
+					  cvm_oct_periodic_worker);
 			priv->imode = imode;
 			priv->port = port;
 			priv->queue = cvmx_pko_get_base_queue(priv->port);
@@ -803,44 +769,25 @@ static int __init cvm_oct_init_module(void)
 				fau -=
 				    cvmx_pko_get_num_queues(priv->port) *
 				    sizeof(uint32_t);
+				queue_delayed_work(cvm_oct_poll_queue,
+						   &priv->port_periodic_work, HZ);
 			}
 		}
 	}
 
-	if (INTERRUPT_LIMIT) {
-		/*
-		 * Set the POW timer rate to give an interrupt at most
-		 * INTERRUPT_LIMIT times per second.
-		 */
-		cvmx_write_csr(CVMX_POW_WQ_INT_PC,
-			       octeon_bootinfo->eclock_hz / (INTERRUPT_LIMIT *
-							     16 * 256) << 8);
+	cvm_oct_tx_initialize();
+	cvm_oct_rx_initialize();
 
-		/*
-		 * Enable POW timer interrupt. It will count when
-		 * there are packets available.
-		 */
-		cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group),
-			       0x1ful << 24);
-	} else {
-		/* Enable POW interrupt when our port has at least one packet */
-		cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), 0x1001);
-	}
+	/*
+	 * 150 uS: about 10 1500-byte packtes at 1GE.
+	 */
+	cvm_oct_tx_poll_interval = 150 * (octeon_get_clock_rate() / 1000000);
 
-	/* Enable the poll timer for checking RGMII status */
-	init_timer(&cvm_oct_poll_timer);
-	cvm_oct_poll_timer.data = 0;
-	cvm_oct_poll_timer.function = cvm_do_timer;
-	mod_timer(&cvm_oct_poll_timer, jiffies + HZ);
+	queue_delayed_work(cvm_oct_poll_queue, &cvm_oct_rx_refill_work, HZ);
 
 	return 0;
 }
 
-/**
- * Module / driver shutdown
- *
- * Returns Zero on success
- */
 static void __exit cvm_oct_cleanup_module(void)
 {
 	int port;
@@ -853,22 +800,31 @@ static void __exit cvm_oct_cleanup_module(void)
 	/* Free the interrupt handler */
 	free_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group, cvm_oct_device);
 
-	del_timer(&cvm_oct_poll_timer);
+	atomic_inc_return(&cvm_oct_poll_queue_stopping);
+	cancel_delayed_work_sync(&cvm_oct_rx_refill_work);
+
 	cvm_oct_rx_shutdown();
+	cvm_oct_tx_shutdown();
+
 	cvmx_pko_disable();
 
 	/* Free the ethernet devices */
 	for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) {
 		if (cvm_oct_device[port]) {
-			cvm_oct_tx_shutdown(cvm_oct_device[port]);
-			unregister_netdev(cvm_oct_device[port]);
-			kfree(cvm_oct_device[port]);
+			struct net_device *dev = cvm_oct_device[port];
+			struct octeon_ethernet *priv = netdev_priv(dev);
+			cancel_delayed_work_sync(&priv->port_periodic_work);
+
+			cvm_oct_tx_shutdown_dev(dev);
+			unregister_netdev(dev);
+			kfree(dev);
 			cvm_oct_device[port] = NULL;
 		}
 	}
 
+	destroy_workqueue(cvm_oct_poll_queue);
+
 	cvmx_pko_shutdown();
-	cvm_oct_proc_shutdown();
 
 	cvmx_ipd_free_ptr();
 
diff --git a/drivers/staging/octeon/octeon-ethernet.h b/drivers/staging/octeon/octeon-ethernet.h
index 402a15b..d581925 100644
--- a/drivers/staging/octeon/octeon-ethernet.h
+++ b/drivers/staging/octeon/octeon-ethernet.h
@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -57,58 +57,12 @@ struct octeon_ethernet {
 	uint64_t link_info;
 	/* Called periodically to check link status */
 	void (*poll) (struct net_device *dev);
+	struct delayed_work	port_periodic_work;
+	struct work_struct	port_work;	/* may be unused. */
 };
 
-/**
- * Free a work queue entry received in a intercept callback.
- *
- * @work_queue_entry:
- *               Work queue entry to free
- * Returns Zero on success, Negative on failure.
- */
 int cvm_oct_free_work(void *work_queue_entry);
 
-/**
- * Transmit a work queue entry out of the ethernet port. Both
- * the work queue entry and the packet data can optionally be
- * freed. The work will be freed on error as well.
- *
- * @dev:     Device to transmit out.
- * @work_queue_entry:
- *                Work queue entry to send
- * @do_free: True if the work queue entry and packet data should be
- *                freed. If false, neither will be freed.
- * @qos:     Index into the queues for this port to transmit on. This
- *                is used to implement QoS if their are multiple queues per
- *                port. This parameter must be between 0 and the number of
- *                queues per port minus 1. Values outside of this range will
- *                be change to zero.
- *
- * Returns Zero on success, negative on failure.
- */
-int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
-			 int do_free, int qos);
-
-/**
- * Transmit a work queue entry out of the ethernet port. Both
- * the work queue entry and the packet data can optionally be
- * freed. The work will be freed on error as well. This simply
- * wraps cvmx_oct_transmit_qos() for backwards compatability.
- *
- * @dev:     Device to transmit out.
- * @work_queue_entry:
- *                Work queue entry to send
- * @do_free: True if the work queue entry and packet data should be
- *                freed. If false, neither will be freed.
- *
- * Returns Zero on success, negative on failure.
- */
-static inline int cvm_oct_transmit(struct net_device *dev,
-				   void *work_queue_entry, int do_free)
-{
-	return cvm_oct_transmit_qos(dev, work_queue_entry, do_free, 0);
-}
-
 extern int cvm_oct_rgmii_init(struct net_device *dev);
 extern void cvm_oct_rgmii_uninit(struct net_device *dev);
 extern int cvm_oct_rgmii_open(struct net_device *dev);
@@ -134,5 +88,11 @@ extern int pow_send_group;
 extern int pow_receive_group;
 extern char pow_send_list[];
 extern struct net_device *cvm_oct_device[];
+extern struct workqueue_struct *cvm_oct_poll_queue;
+extern atomic_t cvm_oct_poll_queue_stopping;
+extern u64 cvm_oct_tx_poll_interval;
+
+extern int max_rx_cpus;
+extern int rx_napi_weight;
 
 #endif
diff --git a/drivers/staging/sm7xx/smtc2d.c b/drivers/staging/sm7xx/smtc2d.c
index 133b86c..2fff0a0 100644
--- a/drivers/staging/sm7xx/smtc2d.c
+++ b/drivers/staging/sm7xx/smtc2d.c
@@ -5,7 +5,7 @@
  * Author: Boyod boyod.yang@siliconmotion.com.cn
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License. See the file COPYING in the main directory of this archive for
diff --git a/drivers/staging/sm7xx/smtc2d.h b/drivers/staging/sm7xx/smtc2d.h
index 38d0c33..02b4fa2 100644
--- a/drivers/staging/sm7xx/smtc2d.h
+++ b/drivers/staging/sm7xx/smtc2d.h
@@ -5,7 +5,7 @@
  * Author: Ge Wang, gewang@siliconmotion.com
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License. See the file COPYING in the main directory of this archive for
diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c
index 161dbc9..a4f6f49 100644
--- a/drivers/staging/sm7xx/smtcfb.c
+++ b/drivers/staging/sm7xx/smtcfb.c
@@ -6,7 +6,7 @@
  * 	    Boyod boyod.yang@siliconmotion.com.cn
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License. See the file COPYING in the main directory of this archive for
diff --git a/drivers/staging/sm7xx/smtcfb.h b/drivers/staging/sm7xx/smtcfb.h
index 7f2c341..7ee565c 100644
--- a/drivers/staging/sm7xx/smtcfb.h
+++ b/drivers/staging/sm7xx/smtcfb.h
@@ -6,7 +6,7 @@
  *	 	Boyod boyod.yang@siliconmotion.com.cn
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License. See the file COPYING in the main directory of this archive for
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 2e94b71..2bb95cd 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -34,6 +34,7 @@
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <linux/clk.h>
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
@@ -80,6 +81,8 @@ static struct resource *ar7_regs_wdt;
 /* Pointer to the remapped WDT IO space */
 static struct ar7_wdt *ar7_wdt;
 
+static struct clk *vbus_clk;
+
 static void ar7_wdt_kick(u32 value)
 {
 	WRITE_REG(ar7_wdt->kick_lock, 0x5555);
@@ -138,17 +141,19 @@ static void ar7_wdt_disable(u32 value)
 static void ar7_wdt_update_margin(int new_margin)
 {
 	u32 change;
+	u32 vbus_rate;
 
-	change = new_margin * (ar7_vbus_freq() / prescale_value);
+	vbus_rate = clk_get_rate(vbus_clk);
+	change = new_margin * (vbus_rate / prescale_value);
 	if (change < 1)
 		change = 1;
 	if (change > 0xffff)
 		change = 0xffff;
 	ar7_wdt_change(change);
-	margin = change * prescale_value / ar7_vbus_freq();
+	margin = change * prescale_value / vbus_rate;
 	printk(KERN_INFO DRVNAME
 	       ": timer margin %d seconds (prescale %d, change %d, freq %d)\n",
-	       margin, prescale_value, change, ar7_vbus_freq());
+	       margin, prescale_value, change, vbus_rate);
 }
 
 static void ar7_wdt_enable_wdt(void)
@@ -298,6 +303,13 @@ static int __devinit ar7_wdt_probe(struct platform_device *pdev)
 		goto out_mem_region;
 	}
 
+	vbus_clk = clk_get(NULL, "vbus");
+	if (IS_ERR(vbus_clk)) {
+		printk(KERN_ERR DRVNAME ": could not get vbus clock\n");
+		rc = PTR_ERR(vbus_clk);
+		goto out_mem_region;
+	}
+
 	ar7_wdt_disable_wdt();
 	ar7_wdt_prescale(prescale_value);
 	ar7_wdt_update_margin(margin);