Merge branch 'fec-next'

Florian Fainelli says:

====================
net: phy: Broadcom BCM7xxx PHY workaround update

This patch sets the change to of_phy_connect() that you have seen before,
this time with the full context of why it is useful and applicable here.

Due to some design decision, the internal PHY on Broadcom BCM7xxx chips
is not entirely self contained and does not report its internal revision
through MII_PHYSID2, that is left to external PHY designs.

This forces us to get the PHY revision from the GENET and SF2 switch drivers
because those two peripherals integrate such a PHY and do contain the PHY
revision in their registers.

The approach taken here is hopefully easy to extend to similar needs for
other chips/ as well.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

8 files changed, 51 insertions, 20 deletions

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 02d7db3..a97ba25 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -376,6 +376,9 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
 					SWITCH_TOP_REV_MASK;
 	priv->hw_params.core_rev = (rev & SF2_REV_MASK);
 
+	rev = reg_readl(priv, REG_PHY_REVISION);
+	priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
+
 	pr_info("Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n",
 		priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
 		priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
@@ -399,6 +402,18 @@ static int bcm_sf2_sw_set_addr(struct dsa_switch *ds, u8 *addr)
 	return 0;
 }
 
+static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+
+	/* The BCM7xxx PHY driver expects to find the integrated PHY revision
+	 * in bits 15:8 and the patch level in bits 7:0 which is exactly what
+	 * the REG_PHY_REVISION register layout is.
+	 */
+
+	return priv->hw_params.gphy_rev;
+}
+
 static int bcm_sf2_sw_indir_rw(struct dsa_switch *ds, int op, int addr,
 			       int regnum, u16 val)
 {
@@ -597,6 +612,7 @@ static struct dsa_switch_driver bcm_sf2_switch_driver = {
 	.probe			= bcm_sf2_sw_probe,
 	.setup			= bcm_sf2_sw_setup,
 	.set_addr		= bcm_sf2_sw_set_addr,
+	.get_phy_flags		= bcm_sf2_sw_get_phy_flags,
 	.phy_read		= bcm_sf2_sw_phy_read,
 	.phy_write		= bcm_sf2_sw_phy_write,
 	.get_strings		= bcm_sf2_sw_get_strings,
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index 260bab3..d3bd52d 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -26,6 +26,7 @@
 struct bcm_sf2_hw_params {
 	u16	top_rev;
 	u16	core_rev;
+	u16	gphy_rev;
 	u32	num_gphy;
 	u8	num_acb_queue;
 	u8	num_rgmii;
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index 885c231..c65f138 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -25,6 +25,7 @@
 #define  SWITCH_TOP_REV_MASK		0xffff
 
 #define REG_PHY_REVISION		0x1C
+#define  PHY_REVISION_MASK		0xffff
 
 #define REG_SPHY_CNTRL			0x2C
 #define  IDDQ_BIAS			(1 << 0)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 3f9d4de..a12c656 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2432,6 +2432,13 @@ static void bcmgenet_set_hw_params(struct bcmgenet_priv *priv)
 	dev_info(&priv->pdev->dev, "GENET " GENET_VER_FMT,
 		 major, (reg >> 16) & 0x0f, reg & 0xffff);
 
+	/* Store the integrated PHY revision for the MDIO probing function
+	 * to pass this information to the PHY driver. The PHY driver expects
+	 * to find the PHY major revision in bits 15:8 while the GENET register
+	 * stores that information in bits 7:0, account for that.
+	 */
+	priv->gphy_rev = (reg & 0xffff) << 8;
+
 #ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (!(params->flags & GENET_HAS_40BITS))
 		pr_warn("GENET does not support 40-bits PA\n");
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index c862d06..ad95fe5 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -545,6 +545,7 @@ struct bcmgenet_priv {
 	struct phy_device *phydev;
 	struct device_node *phy_dn;
 	struct mii_bus *mii_bus;
+	u16 gphy_rev;
 
 	/* PHY device variables */
 	int old_duplex;
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index c88f7ae..75b26cba 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -296,7 +296,7 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct device_node *dn = priv->pdev->dev.of_node;
 	struct phy_device *phydev;
-	unsigned int phy_flags;
+	u32 phy_flags;
 	int ret;
 
 	if (priv->phydev) {
@@ -315,8 +315,11 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 		priv->phy_dn = of_node_get(dn);
 	}
 
-	phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, 0,
-				priv->phy_interface);
+	/* Communicate the integrated PHY revision */
+	phy_flags = priv->gphy_rev;
+
+	phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup,
+				phy_flags, priv->phy_interface);
 	if (!phydev) {
 		pr_err("could not attach to PHY\n");
 		return -ENODEV;
@@ -338,15 +341,6 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 		return ret;
 	}
 
-	phy_flags = PHY_BRCM_100MBPS_WAR;
-
-	/* workarounds are only needed for 100Mpbs PHYs, and
-	 * never on GENET V1 hardware
-	 */
-	if ((phydev->supported & PHY_GBIT_FEATURES) || GENET_IS_V1(priv))
-		phy_flags = 0;
-
-	phydev->dev_flags |= phy_flags;
 	phydev->advertising = phydev->supported;
 
 	/* The internal PHY has its link interrupts routed to the
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 09dd6e1..daae699 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -196,13 +196,22 @@ static int bcm7xxx_eee_enable(struct phy_device *phydev)
 
 static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 {
-	int ret;
-
-	ret = bcm7445_config_init(phydev);
-	if (ret)
-		return ret;
+	u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
+	u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
+	int ret = 0;
+
+	dev_info(&phydev->dev, "PHY revision: 0x%02x, patch: %d\n", rev, patch);
+
+	switch (rev) {
+	case 0xa0:
+	case 0xb0:
+		ret = bcm7445_config_init(phydev);
+		break;
+	default:
+		ret = bcm7xxx_28nm_afe_config_init(phydev);
+		break;
+	}
 
-	ret = bcm7xxx_28nm_afe_config_init(phydev);
 	if (ret)
 		return ret;
 
@@ -257,8 +266,8 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
 	phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
 	phy_read(phydev, MII_BCM7XXX_AUX_MODE);
 
-	/* Workaround only required for 100Mbits/sec */
-	if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR))
+	/* Workaround only required for 100Mbits/sec capable PHYs */
+	if (phydev->supported & PHY_GBIT_FEATURES)
 		return 0;
 
 	/* set shadow mode 2 */
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 401b245..a85d800 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -224,6 +224,8 @@ struct phy_device *of_phy_connect(struct net_device *dev,
 	if (!phy)
 		return NULL;
 
+	phy->dev_flags = flags;
+
 	return phy_connect_direct(dev, phy, hndlr, iface) ? NULL : phy;
 }
 EXPORT_SYMBOL(of_phy_connect);