diff options
| author | Eddie C. Dost <ecd@brainaid.de> | 2006-01-18 14:54:31 -0800 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2006-01-18 14:54:31 -0800 |
| commit | c126cf80d450a4d0aac3de7162d4c14b5c971b24 (patch) | |
| tree | dfac36b98cd1ff6d05d2a15482c39c2ecedc5cb3 /drivers | |
| parent | c07a8475ddcadb55b11379c35c9586971a9cedbf (diff) | |
| download | op-kernel-dev-c126cf80d450a4d0aac3de7162d4c14b5c971b24.zip op-kernel-dev-c126cf80d450a4d0aac3de7162d4c14b5c971b24.tar.gz | |
[SPARC64]: Serial Console for E250 Patch
From: Eddie C. Dost <ecd@brainaid.de>
I have the following patch for serial console over the RSC
(remote system controller) on my E250 machine. It basically adds
support for input-device=rsc and output-device=rsc from OBP, and
allows 115200,8,n,1,- serial mode setting.
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/serial/suncore.c | 34 | ||||
| -rw-r--r-- | drivers/serial/sunsab.c | 7 |
2 files changed, 36 insertions, 5 deletions
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c index 5fc4a62..fa4ae94 100644 --- a/drivers/serial/suncore.c +++ b/drivers/serial/suncore.c @@ -34,6 +34,7 @@ sunserial_console_termios(struct console *con) char *mode_prop = "ttyX-mode"; char *cd_prop = "ttyX-ignore-cd"; char *dtr_prop = "ttyX-rts-dtr-off"; + char *ssp_console_modes_prop = "ssp-console-modes"; int baud, bits, stop, cflag; char parity; int carrier = 0; @@ -43,14 +44,39 @@ sunserial_console_termios(struct console *con) if (!serial_console) return; - if (serial_console == 1) { + switch (serial_console) { + case PROMDEV_OTTYA: mode_prop[3] = 'a'; cd_prop[3] = 'a'; dtr_prop[3] = 'a'; - } else { + break; + + case PROMDEV_OTTYB: mode_prop[3] = 'b'; cd_prop[3] = 'b'; dtr_prop[3] = 'b'; + break; + + case PROMDEV_ORSC: + + nd = prom_pathtoinode("rsc"); + if (!nd) { + strcpy(mode, "115200,8,n,1,-"); + goto no_options; + } + + if (!prom_node_has_property(nd, ssp_console_modes_prop)) { + strcpy(mode, "115200,8,n,1,-"); + goto no_options; + } + + memset(mode, 0, sizeof(mode)); + prom_getstring(nd, ssp_console_modes_prop, mode, sizeof(mode)); + goto no_options; + + default: + strcpy(mode, "9600,8,n,1,-"); + goto no_options; } topnd = prom_getchild(prom_root_node); @@ -110,6 +136,10 @@ no_options: case 9600: cflag |= B9600; break; case 19200: cflag |= B19200; break; case 38400: cflag |= B38400; break; + case 57600: cflag |= B57600; break; + case 115200: cflag |= B115200; break; + case 230400: cflag |= B230400; break; + case 460800: cflag |= B460800; break; default: baud = 9600; cflag |= B9600; break; } diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 7e773ff..8bcaebc 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -897,9 +897,6 @@ static int sunsab_console_setup(struct console *con, char *options) sunserial_console_termios(con); - /* Firmware console speed is limited to 150-->38400 baud so - * this hackish cflag thing is OK. - */ switch (con->cflag & CBAUD) { case B150: baud = 150; break; case B300: baud = 300; break; @@ -910,6 +907,10 @@ static int sunsab_console_setup(struct console *con, char *options) default: case B9600: baud = 9600; break; case B19200: baud = 19200; break; case B38400: baud = 38400; break; + case B57600: baud = 57600; break; + case B115200: baud = 115200; break; + case B230400: baud = 230400; break; + case B460800: baud = 460800; break; }; /* |
