Merge master.kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6

48 files changed, 2767 insertions, 2877 deletions

diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index d682dbc..b5dc593 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -1,5 +1,5 @@
 # drivers/mtd/chips/Kconfig
-# $Id: Kconfig,v 1.13 2004/12/01 15:49:10 nico Exp $
+# $Id: Kconfig,v 1.15 2005/06/06 23:04:35 tpoynor Exp $
 
 menu "RAM/ROM/Flash chip drivers"
 	depends on MTD!=n
@@ -155,6 +155,31 @@ config MTD_CFI_I8
 	  If your flash chips are interleaved in eights - i.e. you have eight
 	  flash chips addressed by each bus cycle, then say 'Y'.
 
+config MTD_OTP
+	bool "Protection Registers aka one-time programmable (OTP) bits"
+	depends on MTD_CFI_ADV_OPTIONS
+	default n
+	help
+	  This enables support for reading, writing and locking so called
+	  "Protection Registers" present on some flash chips.
+	  A subset of them are pre-programmed at the factory with a
+	  unique set of values. The rest is user-programmable.
+
+	  The user-programmable Protection Registers contain one-time
+	  programmable (OTP) bits; when programmed, register bits cannot be
+	  erased. Each Protection Register can be accessed multiple times to
+	  program individual bits, as long as the register remains unlocked.
+
+	  Each Protection Register has an associated Lock Register bit. When a
+	  Lock Register bit is programmed, the associated Protection Register
+	  can only be read; it can no longer be programmed. Additionally,
+	  because the Lock Register bits themselves are OTP, when programmed,
+	  Lock Register bits cannot be erased. Therefore, when a Protection
+	  Register is locked, it cannot be unlocked.
+
+	  This feature should therefore be used with extreme care. Any mistake
+	  in the programming of OTP bits will waste them.
+
 config MTD_CFI_INTELEXT
 	tristate "Support for Intel/Sharp flash chips"
 	depends on MTD_GEN_PROBE
@@ -275,7 +300,7 @@ config MTD_JEDEC
 
 config MTD_XIP
 	bool "XIP aware MTD support"
-	depends on !SMP && MTD_CFI_INTELEXT && EXPERIMENTAL
+	depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && EXPERIMENTAL
 	default y if XIP_KERNEL
 	help
 	  This allows MTD support to work with flash memory which is also
diff --git a/drivers/mtd/chips/amd_flash.c b/drivers/mtd/chips/amd_flash.c
index 41e2e3e..2dafeba 100644
--- a/drivers/mtd/chips/amd_flash.c
+++ b/drivers/mtd/chips/amd_flash.c
@@ -3,7 +3,7 @@
  *
  * Author: Jonas Holmberg <jonas.holmberg@axis.com>
  *
- * $Id: amd_flash.c,v 1.26 2004/11/20 12:49:04 dwmw2 Exp $
+ * $Id: amd_flash.c,v 1.27 2005/02/04 07:43:09 jonashg Exp $
  *
  * Copyright (c) 2001 Axis Communications AB
  *
@@ -67,7 +67,6 @@
 #define AM29LV160DT	0x22C4
 #define AM29LV160DB	0x2249
 #define AM29BDS323D     0x22D1
-#define AM29BDS643D	0x227E
 
 /* Atmel */
 #define AT49xV16x	0x00C0
@@ -618,17 +617,6 @@ static struct mtd_info *amd_flash_probe(struct map_info *map)
 			{ .offset = 0x3f0000, .erasesize = 0x02000, .numblocks =  8 },
 		}
 	}, {
-		.mfr_id = MANUFACTURER_AMD,
-		.dev_id = AM29BDS643D,
-		.name = "AMD AM29BDS643D",
-		.size = 0x00800000,
-		.numeraseregions = 3,
-		.regions = {
-			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 96 },
-			{ .offset = 0x600000, .erasesize = 0x10000, .numblocks = 31 },
-			{ .offset = 0x7f0000, .erasesize = 0x02000, .numblocks =  8 },
-		}
-	}, {
 		.mfr_id = MANUFACTURER_ATMEL,
 		.dev_id = AT49xV16x,
 		.name = "Atmel AT49xV16x",
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index c268bcd..0cfcd88 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -4,7 +4,7 @@
  *
  * (C) 2000 Red Hat. GPL'd
  *
- * $Id: cfi_cmdset_0001.c,v 1.164 2004/11/16 18:29:00 dwmw2 Exp $
+ * $Id: cfi_cmdset_0001.c,v 1.178 2005/05/19 17:05:43 nico Exp $
  *
  * 
  * 10/10/2000	Nicolas Pitre <nico@cam.org>
@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/reboot.h>
 #include <linux/mtd/xip.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
@@ -48,16 +49,25 @@
 #define M50LPW080       0x002F
 
 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
-//static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
-//static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
 static int cfi_intelext_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
 static int cfi_intelext_erase_varsize(struct mtd_info *, struct erase_info *);
 static void cfi_intelext_sync (struct mtd_info *);
 static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len);
 static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len);
+#ifdef CONFIG_MTD_OTP
+static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int cfi_intelext_write_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int cfi_intelext_lock_user_prot_reg (struct mtd_info *, loff_t, size_t);
+static int cfi_intelext_get_fact_prot_info (struct mtd_info *,
+					    struct otp_info *, size_t);
+static int cfi_intelext_get_user_prot_info (struct mtd_info *,
+					    struct otp_info *, size_t);
+#endif
 static int cfi_intelext_suspend (struct mtd_info *);
 static void cfi_intelext_resume (struct mtd_info *);
+static int cfi_intelext_reboot (struct notifier_block *, unsigned long, void *);
 
 static void cfi_intelext_destroy(struct mtd_info *);
 
@@ -252,7 +262,8 @@ read_pri_intelext(struct map_info *map, __u16 adr)
 		int nb_parts, i;
 
 		/* Protection Register info */
-		extra_size += (extp->NumProtectionFields - 1) * (4 + 6);
+		extra_size += (extp->NumProtectionFields - 1) *
+			      sizeof(struct cfi_intelext_otpinfo);
 
 		/* Burst Read info */
 		extra_size += 6;
@@ -324,7 +335,9 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
 	mtd->resume  = cfi_intelext_resume;
 	mtd->flags   = MTD_CAP_NORFLASH;
 	mtd->name    = map->name;
-	
+
+	mtd->reboot_notifier.notifier_call = cfi_intelext_reboot;
+
 	if (cfi->cfi_mode == CFI_MODE_CFI) {
 		/* 
 		 * It's a real CFI chip, not one for which the probe
@@ -422,9 +435,13 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd)
 		       mtd->eraseregions[i].numblocks);
 	}
 
-#if 0
-	mtd->read_user_prot_reg = cfi_intelext_read_user_prot_reg;
+#ifdef CONFIG_MTD_OTP
 	mtd->read_fact_prot_reg = cfi_intelext_read_fact_prot_reg;
+	mtd->read_user_prot_reg = cfi_intelext_read_user_prot_reg;
+	mtd->write_user_prot_reg = cfi_intelext_write_user_prot_reg;
+	mtd->lock_user_prot_reg = cfi_intelext_lock_user_prot_reg;
+	mtd->get_fact_prot_info = cfi_intelext_get_fact_prot_info;
+	mtd->get_user_prot_info = cfi_intelext_get_user_prot_info;
 #endif
 
 	/* This function has the potential to distort the reality
@@ -433,6 +450,7 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd)
 		goto setup_err;
 
 	__module_get(THIS_MODULE);
+	register_reboot_notifier(&mtd->reboot_notifier);
 	return mtd;
 
  setup_err:
@@ -471,7 +489,8 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
 		int offs, numregions, numparts, partshift, numvirtchips, i, j;
 
 		/* Protection Register info */
-		offs = (extp->NumProtectionFields - 1) * (4 + 6);
+		offs = (extp->NumProtectionFields - 1) *
+		       sizeof(struct cfi_intelext_otpinfo);
 
 		/* Burst Read info */
 		offs += 6;
@@ -563,7 +582,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
  resettime:
 	timeo = jiffies + HZ;
  retry:
-	if (chip->priv && (mode == FL_WRITING || mode == FL_ERASING)) {
+	if (chip->priv && (mode == FL_WRITING || mode == FL_ERASING || mode == FL_OTP_WRITE)) {
 		/*
 		 * OK. We have possibility for contension on the write/erase
 		 * operations which are global to the real chip and not per
@@ -807,10 +826,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
  * assembly to make sure inline functions were actually inlined and that gcc
  * didn't emit calls to its own support functions). Also configuring MTD CFI
  * support to a single buswidth and a single interleave is also recommended.
- * Note that not only IRQs are disabled but the preemption count is also
- * increased to prevent other locking primitives (namely spin_unlock) from
- * decrementing the preempt count to zero and scheduling the CPU away while
- * not in array mode.
  */
 
 static void xip_disable(struct map_info *map, struct flchip *chip,
@@ -818,7 +833,6 @@ static void xip_disable(struct map_info *map, struct flchip *chip,
 {
 	/* TODO: chips with no XIP use should ignore and return */
 	(void) map_read(map, adr); /* ensure mmu mapping is up to date */
-	preempt_disable();
 	local_irq_disable();
 }
 
@@ -831,9 +845,8 @@ static void __xipram xip_enable(struct map_info *map, struct flchip *chip,
 		chip->state = FL_READY;
 	}
 	(void) map_read(map, adr);
-	asm volatile (".rep 8; nop; .endr"); /* fill instruction prefetch */
+	xip_iprefetch();
 	local_irq_enable();
-	preempt_enable();
 }
 
 /*
@@ -909,7 +922,7 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
 			(void) map_read(map, adr);
 			asm volatile (".rep 8; nop; .endr");
 			local_irq_enable();
-			preempt_enable();
+			spin_unlock(chip->mutex);
 			asm volatile (".rep 8; nop; .endr");
 			cond_resched();
 
@@ -919,15 +932,15 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
 			 * a suspended erase state.  If so let's wait
 			 * until it's done.
 			 */
-			preempt_disable();
+			spin_lock(chip->mutex);
 			while (chip->state != newstate) {
 				DECLARE_WAITQUEUE(wait, current);
 				set_current_state(TASK_UNINTERRUPTIBLE);
 				add_wait_queue(&chip->wq, &wait);
-				preempt_enable();
+				spin_unlock(chip->mutex);
 				schedule();
 				remove_wait_queue(&chip->wq, &wait);
-				preempt_disable();
+				spin_lock(chip->mutex);
 			}
 			/* Disallow XIP again */
 			local_irq_disable();
@@ -956,12 +969,14 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
  * The INVALIDATE_CACHED_RANGE() macro is normally used in parallel while
  * the flash is actively programming or erasing since we have to poll for
  * the operation to complete anyway.  We can't do that in a generic way with
- * a XIP setup so do it before the actual flash operation in this case.
+ * a XIP setup so do it before the actual flash operation in this case
+ * and stub it out from INVALIDATE_CACHE_UDELAY.
  */
-#undef INVALIDATE_CACHED_RANGE
-#define INVALIDATE_CACHED_RANGE(x...)
-#define XIP_INVAL_CACHED_RANGE(map, from, size) \
-	do { if(map->inval_cache) map->inval_cache(map, from, size); } while(0)
+#define XIP_INVAL_CACHED_RANGE(map, from, size)  \
+	INVALIDATE_CACHED_RANGE(map, from, size)
+
+#define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec)  \
+	UDELAY(map, chip, adr, usec)
 
 /*
  * Extra notes:
@@ -984,11 +999,23 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
 
 #define xip_disable(map, chip, adr)
 #define xip_enable(map, chip, adr)
-
-#define UDELAY(map, chip, adr, usec)  cfi_udelay(usec)
-
 #define XIP_INVAL_CACHED_RANGE(x...)
 
+#define UDELAY(map, chip, adr, usec)  \
+do {  \
+	spin_unlock(chip->mutex);  \
+	cfi_udelay(usec);  \
+	spin_lock(chip->mutex);  \
+} while (0)
+
+#define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec)  \
+do {  \
+	spin_unlock(chip->mutex);  \
+	INVALIDATE_CACHED_RANGE(map, adr, len);  \
+	cfi_udelay(usec);  \
+	spin_lock(chip->mutex);  \
+} while (0)
+
 #endif
 
 static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len)
@@ -1176,111 +1203,11 @@ static int cfi_intelext_read (struct mtd_info *mtd, loff_t from, size_t len, siz
 	return ret;
 }
 
-#if 0
-static int __xipram cfi_intelext_read_prot_reg (struct mtd_info *mtd,
-						loff_t from, size_t len,
-						size_t *retlen,
-						u_char *buf,
-						int base_offst, int reg_sz)
-{
-	struct map_info *map = mtd->priv;
-	struct cfi_private *cfi = map->fldrv_priv;
-	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-	struct flchip *chip;
-	int ofs_factor = cfi->interleave * cfi->device_type;
-	int count = len;
-	int chip_num, offst;
-	int ret;
-
-	chip_num = ((unsigned int)from/reg_sz);
-	offst = from - (reg_sz*chip_num)+base_offst;
-
-	while (count) {
-	/* Calculate which chip & protection register offset we need */
-
-		if (chip_num >= cfi->numchips)
-			goto out;
-
-		chip = &cfi->chips[chip_num];
-		
-		spin_lock(chip->mutex);
-		ret = get_chip(map, chip, chip->start, FL_JEDEC_QUERY);
-		if (ret) {
-			spin_unlock(chip->mutex);
-			return (len-count)?:ret;
-		}
-
-		xip_disable(map, chip, chip->start);
-
-		if (chip->state != FL_JEDEC_QUERY) {
-			map_write(map, CMD(0x90), chip->start);
-			chip->state = FL_JEDEC_QUERY;
-		}
-
-		while (count && ((offst-base_offst) < reg_sz)) {
-			*buf = map_read8(map,(chip->start+((extp->ProtRegAddr+1)*ofs_factor)+offst));
-			buf++;
-			offst++;
-			count--;
-		}
-
-		xip_enable(map, chip, chip->start);
-		put_chip(map, chip, chip->start);
-		spin_unlock(chip->mutex);
-
-		/* Move on to the next chip */
-		chip_num++;
-		offst = base_offst;
-	}
-	
- out:	
-	return len-count;
-}
-	
-static int cfi_intelext_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-{
-	struct map_info *map = mtd->priv;
-	struct cfi_private *cfi = map->fldrv_priv;
-	struct cfi_pri_intelext *extp=cfi->cmdset_priv;
-	int base_offst,reg_sz;
-	
-	/* Check that we actually have some protection registers */
-	if(!extp || !(extp->FeatureSupport&64)){
-		printk(KERN_WARNING "%s: This flash device has no protection data to read!\n",map->name);
-		return 0;
-	}
-
-	base_offst=(1<<extp->FactProtRegSize);
-	reg_sz=(1<<extp->UserProtRegSize);
-
-	return cfi_intelext_read_prot_reg(mtd, from, len, retlen, buf, base_offst, reg_sz);
-}
-
-static int cfi_intelext_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-{
-	struct map_info *map = mtd->priv;
-	struct cfi_private *cfi = map->fldrv_priv;
-	struct cfi_pri_intelext *extp=cfi->cmdset_priv;
-	int base_offst,reg_sz;
-	
-	/* Check that we actually have some protection registers */
-	if(!extp || !(extp->FeatureSupport&64)){
-		printk(KERN_WARNING "%s: This flash device has no protection data to read!\n",map->name);
-		return 0;
-	}
-
-	base_offst=0;
-	reg_sz=(1<<extp->FactProtRegSize);
-
-	return cfi_intelext_read_prot_reg(mtd, from, len, retlen, buf, base_offst, reg_sz);
-}
-#endif
-
 static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
-				     unsigned long adr, map_word datum)
+				     unsigned long adr, map_word datum, int mode)
 {
 	struct cfi_private *cfi = map->fldrv_priv;
-	map_word status, status_OK;
+	map_word status, status_OK, write_cmd;
 	unsigned long timeo;
 	int z, ret=0;
 
@@ -1288,9 +1215,14 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 
 	/* Let's determine this according to the interleave only once */
 	status_OK = CMD(0x80);
+	switch (mode) {
+	case FL_WRITING:   write_cmd = CMD(0x40); break;
+	case FL_OTP_WRITE: write_cmd = CMD(0xc0); break;
+	default: return -EINVAL;
+	}
 
 	spin_lock(chip->mutex);
-	ret = get_chip(map, chip, adr, FL_WRITING);
+	ret = get_chip(map, chip, adr, mode);
 	if (ret) {
 		spin_unlock(chip->mutex);
 		return ret;
@@ -1299,19 +1231,18 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 	XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map));
 	ENABLE_VPP(map);
 	xip_disable(map, chip, adr);
-	map_write(map, CMD(0x40), adr);
+	map_write(map, write_cmd, adr);
 	map_write(map, datum, adr);
-	chip->state = FL_WRITING;
+	chip->state = mode;
 
-	spin_unlock(chip->mutex);
-	INVALIDATE_CACHED_RANGE(map, adr, map_bankwidth(map));
-	UDELAY(map, chip, adr, chip->word_write_time);
-	spin_lock(chip->mutex);
+	INVALIDATE_CACHE_UDELAY(map, chip,
+				adr, map_bankwidth(map),
+				chip->word_write_time);
 
 	timeo = jiffies + (HZ/2);
 	z = 0;
 	for (;;) {
-		if (chip->state != FL_WRITING) {
+		if (chip->state != mode) {
 			/* Someone's suspended the write. Sleep */
 			DECLARE_WAITQUEUE(wait, current);
 
@@ -1339,10 +1270,8 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 		}
 
 		/* Latency issues. Drop the lock, wait a while and retry */
-		spin_unlock(chip->mutex);
 		z++;
 		UDELAY(map, chip, adr, 1);
-		spin_lock(chip->mutex);
 	}
 	if (!z) {
 		chip->word_write_time--;
@@ -1399,7 +1328,7 @@ static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t le
 		datum = map_word_load_partial(map, datum, buf, gap, n);
 
 		ret = do_write_oneword(map, &cfi->chips[chipnum],
-					       bus_ofs, datum);
+					       bus_ofs, datum, FL_WRITING);
 		if (ret) 
 			return ret;
 
@@ -1420,7 +1349,7 @@ static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t le
 		map_word datum = map_word_load(map, buf);
 
 		ret = do_write_oneword(map, &cfi->chips[chipnum],
-				ofs, datum);
+				       ofs, datum, FL_WRITING);
 		if (ret)
 			return ret;
 
@@ -1444,7 +1373,7 @@ static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t le
 		datum = map_word_load_partial(map, datum, buf, 0, len);
 
 		ret = do_write_oneword(map, &cfi->chips[chipnum],
-					       ofs, datum);
+				       ofs, datum, FL_WRITING);
 		if (ret) 
 			return ret;
 		
@@ -1506,9 +1435,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 		if (map_word_andequal(map, status, status_OK, status_OK))
 			break;
 
-		spin_unlock(chip->mutex);
 		UDELAY(map, chip, cmd_adr, 1);
-		spin_lock(chip->mutex);
 
 		if (++z > 20) {
 			/* Argh. Not ready for write to buffer */
@@ -1554,10 +1481,9 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 	map_write(map, CMD(0xd0), cmd_adr);
 	chip->state = FL_WRITING;
 
-	spin_unlock(chip->mutex);
-	INVALIDATE_CACHED_RANGE(map, adr, len);
-	UDELAY(map, chip, cmd_adr, chip->buffer_write_time);
-	spin_lock(chip->mutex);
+	INVALIDATE_CACHE_UDELAY(map, chip, 
+				cmd_adr, len,
+				chip->buffer_write_time);
 
 	timeo = jiffies + (HZ/2);
 	z = 0;
@@ -1589,10 +1515,8 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 		}
 		
 		/* Latency issues. Drop the lock, wait a while and retry */
-		spin_unlock(chip->mutex);
-		UDELAY(map, chip, cmd_adr, 1);
 		z++;
-		spin_lock(chip->mutex);
+		UDELAY(map, chip, cmd_adr, 1);
 	}
 	if (!z) {
 		chip->buffer_write_time--;
@@ -1720,10 +1644,9 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 	chip->state = FL_ERASING;
 	chip->erase_suspended = 0;
 
-	spin_unlock(chip->mutex);
-	INVALIDATE_CACHED_RANGE(map, adr, len);
-	UDELAY(map, chip, adr, chip->erase_time*1000/2);
-	spin_lock(chip->mutex);
+	INVALIDATE_CACHE_UDELAY(map, chip,
+				adr, len,
+				chip->erase_time*1000/2);
 
 	/* FIXME. Use a timer to check this, and return immediately. */
 	/* Once the state machine's known to be working I'll do that */
@@ -1768,9 +1691,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 		}
 		
 		/* Latency issues. Drop the lock, wait a while and retry */
-		spin_unlock(chip->mutex);
 		UDELAY(map, chip, adr, 1000000/HZ);
-		spin_lock(chip->mutex);
 	}
 
 	/* We've broken this before. It doesn't hurt to be safe */
@@ -1780,44 +1701,34 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 
 	/* check for lock bit */
 	if (map_word_bitsset(map, status, CMD(0x3a))) {
-		unsigned char chipstatus;
+		unsigned long chipstatus;
 
 		/* Reset the error bits */
 		map_write(map, CMD(0x50), adr);
 		map_write(map, CMD(0x70), adr);
 		xip_enable(map, chip, adr);
 
-		chipstatus = status.x[0];
-		if (!map_word_equal(map, status, CMD(chipstatus))) {
-			int i, w;
-			for (w=0; w<map_words(map); w++) {
-				for (i = 0; i<cfi_interleave(cfi); i++) {
-					chipstatus |= status.x[w] >> (cfi->device_type * 8);
-				}
-			}
-			printk(KERN_WARNING "Status is not identical for all chips: 0x%lx. Merging to give 0x%02x\n",
-			       status.x[0], chipstatus);
-		}
+		chipstatus = MERGESTATUS(status);
 
 		if ((chipstatus & 0x30) == 0x30) {
-			printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus);
+			printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%lx\n", chipstatus);
 			ret = -EIO;
 		} else if (chipstatus & 0x02) {
 			/* Protection bit set */
 			ret = -EROFS;
 		} else if (chipstatus & 0x8) {
 			/* Voltage */
-			printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", chipstatus);
+			printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%lx\n", chipstatus);
 			ret = -EIO;
 		} else if (chipstatus & 0x20) {
 			if (retries--) {
-				printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, chipstatus);
+				printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus);
 				timeo = jiffies + HZ;
 				put_chip(map, chip, adr);
 				spin_unlock(chip->mutex);
 				goto retry;
 			}
-			printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, chipstatus);
+			printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%lx\n", adr, chipstatus);
 			ret = -EIO;
 		}
 	} else {
@@ -1882,6 +1793,7 @@ static void cfi_intelext_sync (struct mtd_info *mtd)
 		
 		if (chip->state == FL_SYNCING) {
 			chip->state = chip->oldstate;
+			chip->oldstate = FL_READY;
 			wake_up(&chip->wq);
 		}
 		spin_unlock(chip->mutex);
@@ -1897,8 +1809,9 @@ static int __xipram do_printlockstatus_oneblock(struct map_info *map,
 	struct cfi_private *cfi = map->fldrv_priv;
 	int status, ofs_factor = cfi->interleave * cfi->device_type;
 
+	adr += chip->start;
 	xip_disable(map, chip, adr+(2*ofs_factor));
-	cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
+	map_write(map, CMD(0x90), adr+(2*ofs_factor));
 	chip->state = FL_JEDEC_QUERY;
 	status = cfi_read_query(map, adr+(2*ofs_factor));
 	xip_enable(map, chip, 0);
@@ -1915,6 +1828,7 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip
 				       unsigned long adr, int len, void *thunk)
 {
 	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
 	map_word status, status_OK;
 	unsigned long timeo = jiffies + HZ;
 	int ret;
@@ -1944,9 +1858,13 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip
 	} else
 		BUG();
 
-	spin_unlock(chip->mutex);
-	UDELAY(map, chip, adr, 1000000/HZ);
-	spin_lock(chip->mutex);
+	/*
+	 * If Instant Individual Block Locking supported then no need
+	 * to delay.
+	 */
+
+	if (!extp || !(extp->FeatureSupport & (1 << 5)))
+		UDELAY(map, chip, adr, 1000000/HZ);
 
 	/* FIXME. Use a timer to check this, and return immediately. */
 	/* Once the state machine's known to be working I'll do that */
@@ -1973,9 +1891,7 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip
 		}
 		
 		/* Latency issues. Drop the lock, wait a while and retry */
-		spin_unlock(chip->mutex);
 		UDELAY(map, chip, adr, 1);
-		spin_lock(chip->mutex);
 	}
 	
 	/* Done and happy. */
@@ -2034,6 +1950,274 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
 	return ret;
 }
 
+#ifdef CONFIG_MTD_OTP
+
+typedef int (*otp_op_t)(struct map_info *map, struct flchip *chip, 
+			u_long data_offset, u_char *buf, u_int size,
+			u_long prot_offset, u_int groupno, u_int groupsize);
+
+static int __xipram
+do_otp_read(struct map_info *map, struct flchip *chip, u_long offset,
+	    u_char *buf, u_int size, u_long prot, u_int grpno, u_int grpsz)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	int ret;
+
+	spin_lock(chip->mutex);
+	ret = get_chip(map, chip, chip->start, FL_JEDEC_QUERY);
+	if (ret) {
+		spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	/* let's ensure we're not reading back cached data from array mode */
+	INVALIDATE_CACHED_RANGE(map, chip->start + offset, size);
+
+	xip_disable(map, chip, chip->start);
+	if (chip->state != FL_JEDEC_QUERY) {
+		map_write(map, CMD(0x90), chip->start);
+		chip->state = FL_JEDEC_QUERY;
+	}
+	map_copy_from(map, buf, chip->start + offset, size);
+	xip_enable(map, chip, chip->start);
+
+	/* then ensure we don't keep OTP data in the cache */
+	INVALIDATE_CACHED_RANGE(map, chip->start + offset, size);
+
+	put_chip(map, chip, chip->start);
+	spin_unlock(chip->mutex);
+	return 0;
+}
+
+static int
+do_otp_write(struct map_info *map, struct flchip *chip, u_long offset,
+	     u_char *buf, u_int size, u_long prot, u_int grpno, u_int grpsz)
+{
+	int ret;
+
+	while (size) {
+		unsigned long bus_ofs = offset & ~(map_bankwidth(map)-1);
+		int gap = offset - bus_ofs;
+		int n = min_t(int, size, map_bankwidth(map)-gap);
+		map_word datum = map_word_ff(map);
+
+		datum = map_word_load_partial(map, datum, buf, gap, n);
+		ret = do_write_oneword(map, chip, bus_ofs, datum, FL_OTP_WRITE);
+		if (ret) 
+			return ret;
+
+		offset += n;
+		buf += n;
+		size -= n;
+	}
+
+	return 0;
+}
+
+static int
+do_otp_lock(struct map_info *map, struct flchip *chip, u_long offset,
+	    u_char *buf, u_int size, u_long prot, u_int grpno, u_int grpsz)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word datum;
+
+	/* make sure area matches group boundaries */
+	if (size != grpsz)
+		return -EXDEV;
+
+	datum = map_word_ff(map);
+	datum = map_word_clr(map, datum, CMD(1 << grpno));
+	return do_write_oneword(map, chip, prot, datum, FL_OTP_WRITE);
+}
+
+static int cfi_intelext_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
+				 size_t *retlen, u_char *buf,
+				 otp_op_t action, int user_regs)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+	struct flchip *chip;
+	struct cfi_intelext_otpinfo *otp;
+	u_long devsize, reg_prot_offset, data_offset;
+	u_int chip_num, chip_step, field, reg_fact_size, reg_user_size;
+	u_int groups, groupno, groupsize, reg_fact_groups, reg_user_groups;
+	int ret;
+
+	*retlen = 0;
+
+	/* Check that we actually have some OTP registers */
+	if (!extp || !(extp->FeatureSupport & 64) || !extp->NumProtectionFields)
+		return -ENODATA;
+
+	/* we need real chips here not virtual ones */
+	devsize = (1 << cfi->cfiq->DevSize) * cfi->interleave;
+	chip_step = devsize >> cfi->chipshift;
+	chip_num = 0;
+
+	/* Some chips have OTP located in the _top_ partition only.
+	   For example: Intel 28F256L18T (T means top-parameter device) */
+	if (cfi->mfr == MANUFACTURER_INTEL) {
+		switch (cfi->id) {
+		case 0x880b:
+		case 0x880c:
+		case 0x880d:
+			chip_num = chip_step - 1;
+		}
+	}
+
+	for ( ; chip_num < cfi->numchips; chip_num += chip_step) {
+		chip = &cfi->chips[chip_num];
+		otp = (struct cfi_intelext_otpinfo *)&extp->extra[0];
+
+		/* first OTP region */
+		field = 0;
+		reg_prot_offset = extp->ProtRegAddr;
+		reg_fact_groups = 1;
+		reg_fact_size = 1 << extp->FactProtRegSize;
+		reg_user_groups = 1;
+		reg_user_size = 1 << extp->UserProtRegSize;
+
+		while (len > 0) {
+			/* flash geometry fixup */
+			data_offset = reg_prot_offset + 1;
+			data_offset *= cfi->interleave * cfi->device_type;
+			reg_prot_offset *= cfi->interleave * cfi->device_type;
+			reg_fact_size *= cfi->interleave;
+			reg_user_size *= cfi->interleave;
+
+			if (user_regs) {
+				groups = reg_user_groups;
+				groupsize = reg_user_size;
+				/* skip over factory reg area */
+				groupno = reg_fact_groups;
+				data_offset += reg_fact_groups * reg_fact_size;
+			} else {
+				groups = reg_fact_groups;
+				groupsize = reg_fact_size;
+				groupno = 0;
+			}
+
+			while (len > 0 && groups > 0) {
+				if (!action) {
+					/*
+					 * Special case: if action is NULL
+					 * we fill buf with otp_info records.
+					 */
+					struct otp_info *otpinfo;
+					map_word lockword;
+					len -= sizeof(struct otp_info);
+					if (len <= 0)
+						return -ENOSPC;
+					ret = do_otp_read(map, chip,
+							  reg_prot_offset,
+							  (u_char *)&lockword,
+							  map_bankwidth(map),
+							  0, 0,  0);
+					if (ret)
+						return ret;
+					otpinfo = (struct otp_info *)buf;
+					otpinfo->start = from;
+					otpinfo->length = groupsize;
+					otpinfo->locked =
+					   !map_word_bitsset(map, lockword,
+							     CMD(1 << groupno));
+					from += groupsize;
+					buf += sizeof(*otpinfo);
+					*retlen += sizeof(*otpinfo);
+				} else if (from >= groupsize) {
+					from -= groupsize;
+					data_offset += groupsize;
+				} else {
+					int size = groupsize;
+					data_offset += from;
+					size -= from;
+					from = 0;
+					if (size > len)
+						size = len;
+					ret = action(map, chip, data_offset,
+						     buf, size, reg_prot_offset,
+						     groupno, groupsize);
+					if (ret < 0)
+						return ret;
+					buf += size;
+					len -= size;
+					*retlen += size;
+					data_offset += size;
+				}
+				groupno++;
+				groups--;
+			}
+
+			/* next OTP region */
+			if (++field == extp->NumProtectionFields)
+				break;
+			reg_prot_offset = otp->ProtRegAddr;
+			reg_fact_groups = otp->FactGroups;
+			reg_fact_size = 1 << otp->FactProtRegSize;
+			reg_user_groups = otp->UserGroups;
+			reg_user_size = 1 << otp->UserProtRegSize;
+			otp++;
+		}
+	}
+
+	return 0;
+}
+
+static int cfi_intelext_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
+					   size_t len, size_t *retlen,
+					    u_char *buf)
+{
+	return cfi_intelext_otp_walk(mtd, from, len, retlen,
+				     buf, do_otp_read, 0);
+}
+
+static int cfi_intelext_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
+					   size_t len, size_t *retlen,
+					    u_char *buf)
+{
+	return cfi_intelext_otp_walk(mtd, from, len, retlen,
+				     buf, do_otp_read, 1);
+}
+
+static int cfi_intelext_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
+					    size_t len, size_t *retlen,
+					     u_char *buf)
+{
+	return cfi_intelext_otp_walk(mtd, from, len, retlen,
+				     buf, do_otp_write, 1);
+}
+
+static int cfi_intelext_lock_user_prot_reg(struct mtd_info *mtd,
+					   loff_t from, size_t len)
+{
+	size_t retlen;
+	return cfi_intelext_otp_walk(mtd, from, len, &retlen,
+				     NULL, do_otp_lock, 1);
+}
+
+static int cfi_intelext_get_fact_prot_info(struct mtd_info *mtd, 
+					   struct otp_info *buf, size_t len)
+{
+	size_t retlen;
+	int ret;
+
+	ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 0);
+	return ret ? : retlen;
+}
+
+static int cfi_intelext_get_user_prot_info(struct mtd_info *mtd,
+					   struct otp_info *buf, size_t len)
+{
+	size_t retlen;
+	int ret;
+
+	ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 1);
+	return ret ? : retlen;
+}
+
+#endif
+
 static int cfi_intelext_suspend(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
@@ -2125,10 +2309,46 @@ static void cfi_intelext_resume(struct mtd_info *mtd)
 	}
 }
 
+static int cfi_intelext_reset(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i, ret;
+
+	for (i=0; i < cfi->numchips; i++) {
+		struct flchip *chip = &cfi->chips[i];
+
+		/* force the completion of any ongoing operation
+		   and switch to array mode so any bootloader in 
+		   flash is accessible for soft reboot. */
+		spin_lock(chip->mutex);
+		ret = get_chip(map, chip, chip->start, FL_SYNCING);
+		if (!ret) {
+			map_write(map, CMD(0xff), chip->start);
+			chip->state = FL_READY;
+		}
+		spin_unlock(chip->mutex);
+	}
+
+	return 0;
+}
+
+static int cfi_intelext_reboot(struct notifier_block *nb, unsigned long val,
+			       void *v)
+{
+	struct mtd_info *mtd;
+
+	mtd = container_of(nb, struct mtd_info, reboot_notifier);
+	cfi_intelext_reset(mtd);
+	return NOTIFY_DONE;
+}
+
 static void cfi_intelext_destroy(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
+	cfi_intelext_reset(mtd);
+	unregister_reboot_notifier(&mtd->reboot_notifier);
 	kfree(cfi->cmdset_priv);
 	kfree(cfi->cfiq);
 	kfree(cfi->chips[0].priv);
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index fca8ff6..8505f11 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -4,16 +4,20 @@
  *
  * Copyright (C) 2000 Crossnet Co. <info@crossnet.co.jp>
  * Copyright (C) 2004 Arcom Control Systems Ltd <linux@arcom.com>
+ * Copyright (C) 2005 MontaVista Software Inc. <source@mvista.com>
  *
  * 2_by_8 routines added by Simon Munton
  *
  * 4_by_16 work by Carolyn J. Smith
  *
+ * XIP support hooks by Vitaly Wool (based on code for Intel flash 
+ * by Nicolas Pitre)
+ * 
  * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
  *
  * This code is GPL
  *
- * $Id: cfi_cmdset_0002.c,v 1.114 2004/12/11 15:43:53 dedekind Exp $
+ * $Id: cfi_cmdset_0002.c,v 1.118 2005/07/04 22:34:29 gleixner Exp $
  *
  */
 
@@ -34,6 +38,7 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/cfi.h>
+#include <linux/mtd/xip.h>
 
 #define AMD_BOOTLOC_BUG
 #define FORCE_WORD_WRITE 0
@@ -43,6 +48,7 @@
 #define MANUFACTURER_AMD	0x0001
 #define MANUFACTURER_SST	0x00BF
 #define SST49LF004B	        0x0060
+#define SST49LF008A		0x005a
 
 static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -191,6 +197,7 @@ static struct cfi_fixup cfi_fixup_table[] = {
 };
 static struct cfi_fixup jedec_fixup_table[] = {
 	{ MANUFACTURER_SST, SST49LF004B, fixup_use_fwh_lock, NULL, },
+	{ MANUFACTURER_SST, SST49LF008A, fixup_use_fwh_lock, NULL, },
 	{ 0, 0, NULL, NULL }
 };
 
@@ -391,7 +398,7 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
  * correctly and is therefore not done	(particulary with interleaved chips
  * as each chip must be checked independantly of the others).
  */
-static int chip_ready(struct map_info *map, unsigned long addr)
+static int __xipram chip_ready(struct map_info *map, unsigned long addr)
 {
 	map_word d, t;
 
@@ -401,6 +408,32 @@ static int chip_ready(struct map_info *map, unsigned long addr)
 	return map_word_equal(map, d, t);
 }
 
+/*
+ * Return true if the chip is ready and has the correct value.
+ *
+ * Ready is one of: read mode, query mode, erase-suspend-read mode (in any
+ * non-suspended sector) and it is indicated by no bits toggling.
+ *
+ * Error are indicated by toggling bits or bits held with the wrong value,
+ * or with bits toggling.
+ *
+ * Note that anything more complicated than checking if no bits are toggling
+ * (including checking DQ5 for an error status) is tricky to get working
+ * correctly and is therefore not done	(particulary with interleaved chips
+ * as each chip must be checked independantly of the others).
+ *
+ */
+static int __xipram chip_good(struct map_info *map, unsigned long addr, map_word expected)
+{
+	map_word oldd, curd;
+
+	oldd = map_read(map, addr);
+	curd = map_read(map, addr);
+
+	return	map_word_equal(map, oldd, curd) && 
+		map_word_equal(map, curd, expected);
+}
+
 static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode)
 {
 	DECLARE_WAITQUEUE(wait, current);
@@ -420,12 +453,12 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 
 			if (time_after(jiffies, timeo)) {
 				printk(KERN_ERR "Waiting for chip to be ready timed out.\n");
-				cfi_spin_unlock(chip->mutex);
+				spin_unlock(chip->mutex);
 				return -EIO;
 			}
-			cfi_spin_unlock(chip->mutex);
+			spin_unlock(chip->mutex);
 			cfi_udelay(1);
-			cfi_spin_lock(chip->mutex);
+			spin_lock(chip->mutex);
 			/* Someone else might have been playing with it. */
 			goto retry;
 		}
@@ -473,15 +506,23 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 				return -EIO;
 			}
 			
-			cfi_spin_unlock(chip->mutex);
+			spin_unlock(chip->mutex);
 			cfi_udelay(1);
-			cfi_spin_lock(chip->mutex);
+			spin_lock(chip->mutex);
 			/* Nobody will touch it while it's in state FL_ERASE_SUSPENDING.
 			   So we can just loop here. */
 		}
 		chip->state = FL_READY;
 		return 0;
 
+	case FL_XIP_WHILE_ERASING:
+		if (mode != FL_READY && mode != FL_POINT &&
+		    (!cfip || !(cfip->EraseSuspend&2)))
+			goto sleep;
+		chip->oldstate = chip->state;
+		chip->state = FL_READY;
+		return 0;
+
 	case FL_POINT:
 		/* Only if there's no operation suspended... */
 		if (mode == FL_READY && chip->oldstate == FL_READY)
@@ -491,10 +532,10 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 	sleep:
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		add_wait_queue(&chip->wq, &wait);
-		cfi_spin_unlock(chip->mutex);
+		spin_unlock(chip->mutex);
 		schedule();
 		remove_wait_queue(&chip->wq, &wait);
-		cfi_spin_lock(chip->mutex);
+		spin_lock(chip->mutex);
 		goto resettime;
 	}
 }
@@ -512,6 +553,11 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 		chip->state = FL_ERASING;
 		break;
 
+	case FL_XIP_WHILE_ERASING:
+		chip->state = chip->oldstate;
+		chip->oldstate = FL_READY;
+		break;
+
 	case FL_READY:
 	case FL_STATUS:
 		/* We should really make set_vpp() count, rather than doing this */
@@ -523,6 +569,198 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 	wake_up(&chip->wq);
 }
 
+#ifdef CONFIG_MTD_XIP
+
+/*
+ * No interrupt what so ever can be serviced while the flash isn't in array
+ * mode.  This is ensured by the xip_disable() and xip_enable() functions
+ * enclosing any code path where the flash is known not to be in array mode.
+ * And within a XIP disabled code path, only functions marked with __xipram
+ * may be called and nothing else (it's a good thing to inspect generated
+ * assembly to make sure inline functions were actually inlined and that gcc
+ * didn't emit calls to its own support functions). Also configuring MTD CFI
+ * support to a single buswidth and a single interleave is also recommended.
+ */
+
+static void xip_disable(struct map_info *map, struct flchip *chip,
+			unsigned long adr)
+{
+	/* TODO: chips with no XIP use should ignore and return */
+	(void) map_read(map, adr); /* ensure mmu mapping is up to date */
+	local_irq_disable();
+}
+
+static void __xipram xip_enable(struct map_info *map, struct flchip *chip,
+				unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+
+	if (chip->state != FL_POINT && chip->state != FL_READY) {
+		map_write(map, CMD(0xf0), adr);
+		chip->state = FL_READY;
+	}
+	(void) map_read(map, adr);
+	xip_iprefetch();
+	local_irq_enable();
+}
+
+/*
+ * When a delay is required for the flash operation to complete, the
+ * xip_udelay() function is polling for both the given timeout and pending
+ * (but still masked) hardware interrupts.  Whenever there is an interrupt
+ * pending then the flash erase operation is suspended, array mode restored 
+ * and interrupts unmasked.  Task scheduling might also happen at that
+ * point.  The CPU eventually returns from the interrupt or the call to
+ * schedule() and the suspended flash operation is resumed for the remaining
+ * of the delay period.
+ *
+ * Warning: this function _will_ fool interrupt latency tracing tools.
+ */
+
+static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
+				unsigned long adr, int usec)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+	map_word status, OK = CMD(0x80);
+	unsigned long suspended, start = xip_currtime();
+	flstate_t oldstate;
+
+	do {
+		cpu_relax();
+		if (xip_irqpending() && extp &&
+		    ((chip->state == FL_ERASING && (extp->EraseSuspend & 2))) &&
+		    (cfi_interleave_is_1(cfi) || chip->oldstate == FL_READY)) {
+			/*
+			 * Let's suspend the erase operation when supported.  
+			 * Note that we currently don't try to suspend 
+			 * interleaved chips if there is already another 
+			 * operation suspended (imagine what happens
+			 * when one chip was already done with the current
+			 * operation while another chip suspended it, then
+			 * we resume the whole thing at once).  Yes, it
+			 * can happen!
+			 */
+			map_write(map, CMD(0xb0), adr);
+			usec -= xip_elapsed_since(start);
+			suspended = xip_currtime();
+			do {
+				if (xip_elapsed_since(suspended) > 100000) {
+					/*
+					 * The chip doesn't want to suspend
+					 * after waiting for 100 msecs.
+					 * This is a critical error but there
+					 * is not much we can do here.
+					 */
+					return;
+				}
+				status = map_read(map, adr);
+			} while (!map_word_andequal(map, status, OK, OK));
+
+			/* Suspend succeeded */
+			oldstate = chip->state;
+			if (!map_word_bitsset(map, status, CMD(0x40)))
+				break;
+			chip->state = FL_XIP_WHILE_ERASING;
+			chip->erase_suspended = 1;
+			map_write(map, CMD(0xf0), adr);
+			(void) map_read(map, adr);
+			asm volatile (".rep 8; nop; .endr");
+			local_irq_enable();
+			spin_unlock(chip->mutex);
+			asm volatile (".rep 8; nop; .endr");
+			cond_resched();
+
+			/*
+			 * We're back.  However someone else might have
+			 * decided to go write to the chip if we are in
+			 * a suspended erase state.  If so let's wait
+			 * until it's done.
+			 */
+			spin_lock(chip->mutex);
+			while (chip->state != FL_XIP_WHILE_ERASING) {
+				DECLARE_WAITQUEUE(wait, current);
+				set_current_state(TASK_UNINTERRUPTIBLE);
+				add_wait_queue(&chip->wq, &wait);
+				spin_unlock(chip->mutex);
+				schedule();
+				remove_wait_queue(&chip->wq, &wait);
+				spin_lock(chip->mutex);
+			}
+			/* Disallow XIP again */
+			local_irq_disable();
+
+			/* Resume the write or erase operation */
+			map_write(map, CMD(0x30), adr);
+			chip->state = oldstate;
+			start = xip_currtime();
+		} else if (usec >= 1000000/HZ) {
+			/*
+			 * Try to save on CPU power when waiting delay
+			 * is at least a system timer tick period.
+			 * No need to be extremely accurate here.
+			 */
+			xip_cpu_idle();
+		}
+		status = map_read(map, adr);
+	} while (!map_word_andequal(map, status, OK, OK)
+		 && xip_elapsed_since(start) < usec);
+}
+
+#define UDELAY(map, chip, adr, usec)  xip_udelay(map, chip, adr, usec)
+
+/*
+ * The INVALIDATE_CACHED_RANGE() macro is normally used in parallel while
+ * the flash is actively programming or erasing since we have to poll for
+ * the operation to complete anyway.  We can't do that in a generic way with
+ * a XIP setup so do it before the actual flash operation in this case
+ * and stub it out from INVALIDATE_CACHE_UDELAY.
+ */
+#define XIP_INVAL_CACHED_RANGE(map, from, size)  \
+	INVALIDATE_CACHED_RANGE(map, from, size)
+
+#define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec)  \
+	UDELAY(map, chip, adr, usec)
+
+/*
+ * Extra notes:
+ *
+ * Activating this XIP support changes the way the code works a bit.  For
+ * example the code to suspend the current process when concurrent access
+ * happens is never executed because xip_udelay() will always return with the
+ * same chip state as it was entered with.  This is why there is no care for
+ * the presence of add_wait_queue() or schedule() calls from within a couple
+ * xip_disable()'d  areas of code, like in do_erase_oneblock for example.
+ * The queueing and scheduling are always happening within xip_udelay().
+ *
+ * Similarly, get_chip() and put_chip() just happen to always be executed
+ * with chip->state set to FL_READY (or FL_XIP_WHILE_*) where flash state
+ * is in array mode, therefore never executing many cases therein and not
+ * causing any problem with XIP.
+ */
+
+#else
+
+#define xip_disable(map, chip, adr)
+#define xip_enable(map, chip, adr)
+#define XIP_INVAL_CACHED_RANGE(x...)
+
+#define UDELAY(map, chip, adr, usec)  \
+do {  \
+	spin_unlock(chip->mutex);  \
+	cfi_udelay(usec);  \
+	spin_lock(chip->mutex);  \
+} while (0)
+
+#define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec)  \
+do {  \
+	spin_unlock(chip->mutex);  \
+	INVALIDATE_CACHED_RANGE(map, adr, len);  \
+	cfi_udelay(usec);  \
+	spin_lock(chip->mutex);  \
+} while (0)
+
+#endif
 
 static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf)
 {
@@ -535,10 +773,10 @@ static inline int do_read_onechip(struct map_info *map, struct flchip *chip, lof
 	/* Ensure cmd read/writes are aligned. */ 
 	cmd_addr = adr & ~(map_bankwidth(map)-1); 
 
-	cfi_spin_lock(chip->mutex);
+	spin_lock(chip->mutex);
 	ret = get_chip(map, chip, cmd_addr, FL_READY);
 	if (ret) {
-		cfi_spin_unlock(chip->mutex);
+		spin_unlock(chip->mutex);
 		return ret;
 	}
 
@@ -551,7 +789,7 @@ static inline int do_read_onechip(struct map_info *map, struct flchip *chip, lof
 
 	put_chip(map, chip, cmd_addr);
 
-	cfi_spin_unlock(chip->mutex);
+	spin_unlock(chip->mutex);
 	return 0;
 }
 
@@ -605,7 +843,7 @@ static inline int do_read_secsi_onechip(struct map_info *map, struct flchip *chi
 	struct cfi_private *cfi = map->fldrv_priv;
 
  retry:
-	cfi_spin_lock(chip->mutex);
+	spin_lock(chip->mutex);
 
 	if (chip->state != FL_READY){
 #if 0
@@ -614,7 +852,7 @@ static inline int do_read_secsi_onechip(struct map_info *map, struct flchip *chi
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		add_wait_queue(&chip->wq, &wait);
 		
-		cfi_spin_unlock(chip->mutex);
+		spin_unlock(chip->mutex);
 
 		schedule();
 		remove_wait_queue(&chip->wq, &wait);
@@ -643,7 +881,7 @@ static inline int do_read_secsi_onechip(struct map_info *map, struct flchip *chi
 	cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
 	
 	wake_up(&chip->wq);
-	cfi_spin_unlock(chip->mutex);
+	spin_unlock(chip->mutex);
 
 	return 0;
 }
@@ -692,7 +930,7 @@ static int cfi_amdstd_secsi_read (struct mtd_info *mtd, loff_t from, size_t len,
 }
 
 
-static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned long adr, map_word datum)
+static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, unsigned long adr, map_word datum)
 {
 	struct cfi_private *cfi = map->fldrv_priv;
 	unsigned long timeo = jiffies + HZ;
@@ -712,10 +950,10 @@ static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned
 
 	adr += chip->start;
 
-	cfi_spin_lock(chip->mutex);
+	spin_lock(chip->mutex);
 	ret = get_chip(map, chip, adr, FL_WRITING);
 	if (ret) {
-		cfi_spin_unlock(chip->mutex);
+		spin_unlock(chip->mutex);
 		return ret;
 	}
 
@@ -735,7 +973,9 @@ static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned
 		goto op_done;
 	}
 
+	XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map));
 	ENABLE_VPP(map);
+	xip_disable(map, chip, adr);
  retry:
 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
@@ -743,9 +983,9 @@ static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned
 	map_write(map, datum, adr);
 	chip->state = FL_WRITING;
 
-	cfi_spin_unlock(chip->mutex);
-	cfi_udelay(chip->word_write_time);
-	cfi_spin_lock(chip->mutex);
+	INVALIDATE_CACHE_UDELAY(map, chip,
+				adr, map_bankwidth(map),
+				chip->word_write_time);
 
 	/* See comment above for timeout value. */
 	timeo = jiffies + uWriteTimeout; 
@@ -756,39 +996,43 @@ static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned
 
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&chip->wq, &wait);
-			cfi_spin_unlock(chip->mutex);
+			spin_unlock(chip->mutex);
 			schedule();
 			remove_wait_queue(&chip->wq, &wait);
 			timeo = jiffies + (HZ / 2); /* FIXME */
-			cfi_spin_lock(chip->mutex);
+			spin_lock(chip->mutex);
 			continue;
 		}
 
 		if (chip_ready(map, adr))
-			goto op_done;
+			break;
 
-		if (time_after(jiffies, timeo))
+		if (time_after(jiffies, timeo)) {
+			xip_enable(map, chip, adr);
+			printk(KERN_WARNING "MTD %s(): software timeout\n", __func__);
+			xip_disable(map, chip, adr);
                         break;
+		}
 
 		/* Latency issues. Drop the lock, wait a while and retry */
-		cfi_spin_unlock(chip->mutex);
-		cfi_udelay(1);
-		cfi_spin_lock(chip->mutex);
+		UDELAY(map, chip, adr, 1);
 	}
+	/* Did we succeed? */
+	if (!chip_good(map, adr, datum)) {
+		/* reset on all failures. */
+		map_write( map, CMD(0xF0), chip->start );
+		/* FIXME - should have reset delay before continuing */
 
-	printk(KERN_WARNING "MTD %s(): software timeout\n", __func__);
-
-	/* reset on all failures. */
-	map_write( map, CMD(0xF0), chip->start );
-	/* FIXME - should have reset delay before continuing */
-	if (++retry_cnt <= MAX_WORD_RETRIES) 
-		goto retry;
+		if (++retry_cnt <= MAX_WORD_RETRIES) 
+			goto retry;
 
-	ret = -EIO;
+		ret = -EIO;
+	}
+	xip_enable(map, chip, adr);
  op_done:
 	chip->state = FL_READY;
 	put_chip(map, chip, adr);
-	cfi_spin_unlock(chip->mutex);
+	spin_unlock(chip->mutex);
 
 	return ret;
 }
@@ -820,7 +1064,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 		map_word tmp_buf;
 
  retry:
-		cfi_spin_lock(cfi->chips[chipnum].mutex);
+		spin_lock(cfi->chips[chipnum].mutex);
 
 		if (cfi->chips[chipnum].state != FL_READY) {
 #if 0
@@ -829,7 +1073,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&cfi->chips[chipnum].wq, &wait);
 
-			cfi_spin_unlock(cfi->chips[chipnum].mutex);
+			spin_unlock(cfi->chips[chipnum].mutex);
 
 			schedule();
 			remove_wait_queue(&cfi->chips[chipnum].wq, &wait);
@@ -843,7 +1087,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 		/* Load 'tmp_buf' with old contents of flash */
 		tmp_buf = map_read(map, bus_ofs+chipstart);
 
-		cfi_spin_unlock(cfi->chips[chipnum].mutex);
+		spin_unlock(cfi->chips[chipnum].mutex);
 
 		/* Number of bytes to copy from buffer */
 		n = min_t(int, len, map_bankwidth(map)-i);
@@ -898,7 +1142,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 		map_word tmp_buf;
 
  retry1:
-		cfi_spin_lock(cfi->chips[chipnum].mutex);
+		spin_lock(cfi->chips[chipnum].mutex);
 
 		if (cfi->chips[chipnum].state != FL_READY) {
 #if 0
@@ -907,7 +1151,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&cfi->chips[chipnum].wq, &wait);
 
-			cfi_spin_unlock(cfi->chips[chipnum].mutex);
+			spin_unlock(cfi->chips[chipnum].mutex);
 
 			schedule();
 			remove_wait_queue(&cfi->chips[chipnum].wq, &wait);
@@ -920,7 +1164,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 
 		tmp_buf = map_read(map, ofs + chipstart);
 
-		cfi_spin_unlock(cfi->chips[chipnum].mutex);
+		spin_unlock(cfi->chips[chipnum].mutex);
 
 		tmp_buf = map_word_load_partial(map, tmp_buf, buf, 0, len);
 	
@@ -939,8 +1183,9 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 /*
  * FIXME: interleaved mode not tested, and probably not supported!
  */
-static inline int do_write_buffer(struct map_info *map, struct flchip *chip, 
-				  unsigned long adr, const u_char *buf, int len)
+static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+				    unsigned long adr, const u_char *buf, 
+				    int len)
 {
 	struct cfi_private *cfi = map->fldrv_priv;
 	unsigned long timeo = jiffies + HZ;
@@ -954,10 +1199,10 @@ static inline int do_write_buffer(struct map_info *map, struct flchip *chip,
 	adr += chip->start;
 	cmd_adr = adr;
 
-	cfi_spin_lock(chip->mutex);
+	spin_lock(chip->mutex);
 	ret = get_chip(map, chip, adr, FL_WRITING);
 	if (ret) {
-		cfi_spin_unlock(chip->mutex);
+		spin_unlock(chip->mutex);
 		return ret;
 	}
 
@@ -966,7 +1211,10 @@ static inline int do_write_buffer(struct map_info *map, struct flchip *chip,
 	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
 	       __func__, adr, datum.x[0] );
 
+	XIP_INVAL_CACHED_RANGE(map, adr, len);
 	ENABLE_VPP(map);
+	xip_disable(map, chip, cmd_adr);
+	
 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
 	//cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
@@ -996,9 +1244,9 @@ static inline int do_write_buffer(struct map_info *map, struct flchip *chip,
 	map_write(map, CMD(0x29), cmd_adr);
 	chip->state = FL_WRITING;
 
-	cfi_spin_unlock(chip->mutex);
-	cfi_udelay(chip->buffer_write_time);
-	cfi_spin_lock(chip->mutex);
+	INVALIDATE_CACHE_UDELAY(map, chip,
+				adr, map_bankwidth(map),
+				chip->word_write_time);
 
 	timeo = jiffies + uWriteTimeout; 
 		
@@ -1009,38 +1257,39 @@ static inline int do_write_buffer(struct map_info *map, struct flchip *chip,
 
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&chip->wq, &wait);
-			cfi_spin_unlock(chip->mutex);
+			spin_unlock(chip->mutex);
 			schedule();
 			remove_wait_queue(&chip->wq, &wait);
 			timeo = jiffies + (HZ / 2); /* FIXME */
-			cfi_spin_lock(chip->mutex);
+			spin_lock(chip->mutex);
 			continue;
 		}
 
-		if (chip_ready(map, adr))
+		if (chip_ready(map, adr)) {
+			xip_enable(map, chip, adr);
 			goto op_done;
+		}
 		    
 		if( time_after(jiffies, timeo))
 			break;
 
 		/* Latency issues. Drop the lock, wait a while and retry */
-		cfi_spin_unlock(chip->mutex);
-		cfi_udelay(1);
-		cfi_spin_lock(chip->mutex);
+		UDELAY(map, chip, adr, 1);
 	}
 
-	printk(KERN_WARNING "MTD %s(): software timeout\n",
-	       __func__ );
-
 	/* reset on all failures. */
 	map_write( map, CMD(0xF0), chip->start );
+	xip_enable(map, chip, adr);
 	/* FIXME - should have reset delay before continuing */
 
+	printk(KERN_WARNING "MTD %s(): software timeout\n",
+	       __func__ );
+
 	ret = -EIO;
  op_done:
 	chip->state = FL_READY;
 	put_chip(map, chip, adr);
-	cfi_spin_unlock(chip->mutex);
+	spin_unlock(chip->mutex);
 
 	return ret;
 }
@@ -1130,7 +1379,7 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
  * Handle devices with one erase region, that only implement
  * the chip erase command.
  */
-static inline int do_erase_chip(struct map_info *map, struct flchip *chip)
+static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
 {
 	struct cfi_private *cfi = map->fldrv_priv;
 	unsigned long timeo = jiffies + HZ;
@@ -1140,17 +1389,20 @@ static inline int do_erase_chip(struct map_info *map, struct flchip *chip)
 
 	adr = cfi->addr_unlock1;
 
-	cfi_spin_lock(chip->mutex);
+	spin_lock(chip->mutex);
 	ret = get_chip(map, chip, adr, FL_WRITING);
 	if (ret) {
-		cfi_spin_unlock(chip->mutex);
+		spin_unlock(chip->mutex);
 		return ret;
 	}
 
 	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
 	       __func__, chip->start );
 
+	XIP_INVAL_CACHED_RANGE(map, adr, map->size);
 	ENABLE_VPP(map);
+	xip_disable(map, chip, adr);
+
 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
@@ -1162,9 +1414,9 @@ static inline int do_erase_chip(struct map_info *map, struct flchip *chip)
 	chip->erase_suspended = 0;
 	chip->in_progress_block_addr = adr;
 
-	cfi_spin_unlock(chip->mutex);
-	msleep(chip->erase_time/2);
-	cfi_spin_lock(chip->mutex);
+	INVALIDATE_CACHE_UDELAY(map, chip,
+				adr, map->size,
+				chip->erase_time*500);
 
 	timeo = jiffies + (HZ*20);
 
@@ -1173,10 +1425,10 @@ static inline int do_erase_chip(struct map_info *map, struct flchip *chip)
 			/* Someone's suspended the erase. Sleep */
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&chip->wq, &wait);
-			cfi_spin_unlock(chip->mutex);
+			spin_unlock(chip->mutex);
 			schedule();
 			remove_wait_queue(&chip->wq, &wait);
-			cfi_spin_lock(chip->mutex);
+			spin_lock(chip->mutex);
 			continue;
 		}
 		if (chip->erase_suspended) {
@@ -1187,36 +1439,36 @@ static inline int do_erase_chip(struct map_info *map, struct flchip *chip)
 		}
 
 		if (chip_ready(map, adr))
-			goto op_done;
+			break;
 
-		if (time_after(jiffies, timeo))
+		if (time_after(jiffies, timeo)) {
+			printk(KERN_WARNING "MTD %s(): software timeout\n",
+				__func__ );
 			break;
+		}
 
 		/* Latency issues. Drop the lock, wait a while and retry */
-		cfi_spin_unlock(chip->mutex);
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(1);
-		cfi_spin_lock(chip->mutex);
+		UDELAY(map, chip, adr, 1000000/HZ);
 	}
+	/* Did we succeed? */
+	if (!chip_good(map, adr, map_word_ff(map))) {
+		/* reset on all failures. */
+		map_write( map, CMD(0xF0), chip->start );
+		/* FIXME - should have reset delay before continuing */
 
-	printk(KERN_WARNING "MTD %s(): software timeout\n",
-	       __func__ );
-
-	/* reset on all failures. */
-	map_write( map, CMD(0xF0), chip->start );
-	/* FIXME - should have reset delay before continuing */
+		ret = -EIO;
+	}
 
-	ret = -EIO;
- op_done:
 	chip->state = FL_READY;
+	xip_enable(map, chip, adr);
 	put_chip(map, chip, adr);
-	cfi_spin_unlock(chip->mutex);
+	spin_unlock(chip->mutex);
 
 	return ret;
 }
 
 
-static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr, int len, void *thunk)
+static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr, int len, void *thunk)
 {
 	struct cfi_private *cfi = map->fldrv_priv;
 	unsigned long timeo = jiffies + HZ;
@@ -1225,17 +1477,20 @@ static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, u
 
 	adr += chip->start;
 
-	cfi_spin_lock(chip->mutex);
+	spin_lock(chip->mutex);
 	ret = get_chip(map, chip, adr, FL_ERASING);
 	if (ret) {
-		cfi_spin_unlock(chip->mutex);
+		spin_unlock(chip->mutex);
 		return ret;
 	}
 
 	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
 	       __func__, adr );
 
+	XIP_INVAL_CACHED_RANGE(map, adr, len);
 	ENABLE_VPP(map);
+	xip_disable(map, chip, adr);
+
 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
@@ -1246,10 +1501,10 @@ static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, u
 	chip->state = FL_ERASING;
 	chip->erase_suspended = 0;
 	chip->in_progress_block_addr = adr;
-	
-	cfi_spin_unlock(chip->mutex);
-	msleep(chip->erase_time/2);
-	cfi_spin_lock(chip->mutex);
+
+	INVALIDATE_CACHE_UDELAY(map, chip,
+				adr, len,
+				chip->erase_time*500);
 
 	timeo = jiffies + (HZ*20);
 
@@ -1258,10 +1513,10 @@ static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, u
 			/* Someone's suspended the erase. Sleep */
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&chip->wq, &wait);
-			cfi_spin_unlock(chip->mutex);
+			spin_unlock(chip->mutex);
 			schedule();
 			remove_wait_queue(&chip->wq, &wait);
-			cfi_spin_lock(chip->mutex);
+			spin_lock(chip->mutex);
 			continue;
 		}
 		if (chip->erase_suspended) {
@@ -1271,31 +1526,33 @@ static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, u
 			chip->erase_suspended = 0;
 		}
 
-		if (chip_ready(map, adr))
-			goto op_done;
+		if (chip_ready(map, adr)) {
+			xip_enable(map, chip, adr);
+			break;
+		}
 
-		if (time_after(jiffies, timeo))
+		if (time_after(jiffies, timeo)) {
+			xip_enable(map, chip, adr);
+			printk(KERN_WARNING "MTD %s(): software timeout\n",
+				__func__ );
 			break;
+		}
 
 		/* Latency issues. Drop the lock, wait a while and retry */
-		cfi_spin_unlock(chip->mutex);
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(1);
-		cfi_spin_lock(chip->mutex);
+		UDELAY(map, chip, adr, 1000000/HZ);
+	}
+	/* Did we succeed? */
+	if (!chip_good(map, adr, map_word_ff(map))) {
+		/* reset on all failures. */
+		map_write( map, CMD(0xF0), chip->start );
+		/* FIXME - should have reset delay before continuing */
+
+		ret = -EIO;
 	}
-	
-	printk(KERN_WARNING "MTD %s(): software timeout\n",
-	       __func__ );
-	
-	/* reset on all failures. */
-	map_write( map, CMD(0xF0), chip->start );
-	/* FIXME - should have reset delay before continuing */
 
-	ret = -EIO;
- op_done:
 	chip->state = FL_READY;
 	put_chip(map, chip, adr);
-	cfi_spin_unlock(chip->mutex);
+	spin_unlock(chip->mutex);
 	return ret;
 }
 
@@ -1355,7 +1612,7 @@ static void cfi_amdstd_sync (struct mtd_info *mtd)
 		chip = &cfi->chips[i];
 
 	retry:
-		cfi_spin_lock(chip->mutex);
+		spin_lock(chip->mutex);
 
 		switch(chip->state) {
 		case FL_READY:
@@ -1369,14 +1626,14 @@ static void cfi_amdstd_sync (struct mtd_info *mtd)
 			 * with the chip now anyway.
 			 */
 		case FL_SYNCING:
-			cfi_spin_unlock(chip->mutex);
+			spin_unlock(chip->mutex);
 			break;
 
 		default:
 			/* Not an idle state */
 			add_wait_queue(&chip->wq, &wait);
 			
-			cfi_spin_unlock(chip->mutex);
+			spin_unlock(chip->mutex);
 
 			schedule();
 
@@ -1391,13 +1648,13 @@ static void cfi_amdstd_sync (struct mtd_info *mtd)
 	for (i--; i >=0; i--) {
 		chip = &cfi->chips[i];
 
-		cfi_spin_lock(chip->mutex);
+		spin_lock(chip->mutex);
 		
 		if (chip->state == FL_SYNCING) {
 			chip->state = chip->oldstate;
 			wake_up(&chip->wq);
 		}
-		cfi_spin_unlock(chip->mutex);
+		spin_unlock(chip->mutex);
 	}
 }
 
@@ -1413,7 +1670,7 @@ static int cfi_amdstd_suspend(struct mtd_info *mtd)
 	for (i=0; !ret && i<cfi->numchips; i++) {
 		chip = &cfi->chips[i];
 
-		cfi_spin_lock(chip->mutex);
+		spin_lock(chip->mutex);
 
 		switch(chip->state) {
 		case FL_READY:
@@ -1433,7 +1690,7 @@ static int cfi_amdstd_suspend(struct mtd_info *mtd)
 			ret = -EAGAIN;
 			break;
 		}
-		cfi_spin_unlock(chip->mutex);
+		spin_unlock(chip->mutex);
 	}
 
 	/* Unlock the chips again */
@@ -1442,13 +1699,13 @@ static int cfi_amdstd_suspend(struct mtd_info *mtd)
 		for (i--; i >=0; i--) {
 			chip = &cfi->chips[i];
 
-			cfi_spin_lock(chip->mutex);
+			spin_lock(chip->mutex);
 		
 			if (chip->state == FL_PM_SUSPENDED) {
 				chip->state = chip->oldstate;
 				wake_up(&chip->wq);
 			}
-			cfi_spin_unlock(chip->mutex);
+			spin_unlock(chip->mutex);
 		}
 	}
 	
@@ -1467,7 +1724,7 @@ static void cfi_amdstd_resume(struct mtd_info *mtd)
 	
 		chip = &cfi->chips[i];
 
-		cfi_spin_lock(chip->mutex);
+		spin_lock(chip->mutex);
 		
 		if (chip->state == FL_PM_SUSPENDED) {
 			chip->state = FL_READY;
@@ -1477,7 +1734,7 @@ static void cfi_amdstd_resume(struct mtd_info *mtd)
 		else
 			printk(KERN_ERR "Argh. Chip not in PM_SUSPENDED state upon resume()\n");
 
-		cfi_spin_unlock(chip->mutex);
+		spin_unlock(chip->mutex);
 	}
 }
 
diff --git a/drivers/mtd/chips/fwh_lock.h b/drivers/mtd/chips/fwh_lock.h
index fbf4470..e1a5b76 100644
--- a/drivers/mtd/chips/fwh_lock.h
+++ b/drivers/mtd/chips/fwh_lock.h
@@ -58,10 +58,10 @@ static int fwh_xxlock_oneblock(struct map_info *map, struct flchip *chip,
 	 * to flash memory - that means that we don't have to check status
 	 * and timeout.
 	 */
-	cfi_spin_lock(chip->mutex);
+	spin_lock(chip->mutex);
 	ret = get_chip(map, chip, adr, FL_LOCKING);
 	if (ret) {
-		cfi_spin_unlock(chip->mutex);
+		spin_unlock(chip->mutex);
 		return ret;
 	}
 
@@ -71,7 +71,7 @@ static int fwh_xxlock_oneblock(struct map_info *map, struct flchip *chip,
 	/* Done and happy. */
 	chip->state = FL_READY;
 	put_chip(map, chip, adr);
-	cfi_spin_unlock(chip->mutex);
+	spin_unlock(chip->mutex);
 	return 0;
 }
 
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index fc982c4..dc065b2 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -2,7 +2,7 @@
  * Routines common to all CFI-type probes.
  * (C) 2001-2003 Red Hat, Inc.
  * GPL'd
- * $Id: gen_probe.c,v 1.21 2004/08/14 15:14:05 dwmw2 Exp $
+ * $Id: gen_probe.c,v 1.22 2005/01/24 23:49:50 rmk Exp $
  */
 
 #include <linux/kernel.h>
@@ -162,7 +162,7 @@ static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp,
 	int max_chips = map_bankwidth(map); /* And minimum 1 */
 	int nr_chips, type;
 
-	for (nr_chips = min_chips; nr_chips <= max_chips; nr_chips <<= 1) {
+	for (nr_chips = max_chips; nr_chips >= min_chips; nr_chips >>= 1) {
 
 		if (!cfi_interleave_supported(nr_chips))
 		    continue;
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 30325a2..30da428 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1,7 +1,7 @@
 /* 
    Common Flash Interface probe code.
    (C) 2000 Red Hat. GPL'd.
-   $Id: jedec_probe.c,v 1.61 2004/11/19 20:52:16 thayne Exp $
+   $Id: jedec_probe.c,v 1.63 2005/02/14 16:30:32 bjd Exp $
    See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5)
    for the standard this probe goes back to.
 
@@ -142,6 +142,7 @@
 #define SST29LE512	0x003d
 #define SST39LF800	0x2781
 #define SST39LF160	0x2782
+#define SST39VF1601	0x234b
 #define SST39LF512	0x00D4
 #define SST39LF010	0x00D5
 #define SST39LF020	0x00D6
@@ -1448,6 +1449,21 @@ static const struct amd_flash_info jedec_table[] = {
                        ERASEINFO(0x1000,256),
                        ERASEINFO(0x1000,256)
                }
+	}, {
+               .mfr_id         = MANUFACTURER_SST,     /* should be CFI */
+               .dev_id         = SST39VF1601,
+               .name           = "SST 39VF1601",
+               .uaddr          = {
+                       [0] = MTD_UADDR_0x5555_0x2AAA,  /* x8 */
+                       [1] = MTD_UADDR_0x5555_0x2AAA   /* x16 */
+               },
+               .DevSize        = SIZE_2MiB,
+               .CmdSet         = P_ID_AMD_STD,
+               .NumEraseRegions= 2,
+               .regions        = {
+                       ERASEINFO(0x1000,256),
+                       ERASEINFO(0x1000,256)
+               }
 
        }, {
 		.mfr_id		= MANUFACTURER_ST,	/* FIXME - CFI device? */
@@ -1856,6 +1872,16 @@ static inline int jedec_match( __u32 base,
 	case CFI_DEVICETYPE_X8:
 		mfr = (__u8)finfo->mfr_id;
 		id = (__u8)finfo->dev_id;
+
+		/* bjd: it seems that if we do this, we can end up
+		 * detecting 16bit flashes as an 8bit device, even though
+		 * there aren't.
+		 */
+		if (finfo->dev_id > 0xff) {
+			DEBUG( MTD_DEBUG_LEVEL3, "%s(): ID is not 8bit\n",
+			       __func__);
+			goto match_done;
+		}
 		break;
 	case CFI_DEVICETYPE_X16:
 		mfr = (__u16)finfo->mfr_id;
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 60ab4b8..ef24837 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -1,5 +1,5 @@
 /*
- * $Id: cmdlinepart.c,v 1.17 2004/11/26 11:18:47 lavinen Exp $
+ * $Id: cmdlinepart.c,v 1.18 2005/06/07 15:04:26 joern Exp $
  *
  * Read flash partition table from command line
  *
@@ -239,7 +239,8 @@ static int mtdpart_setup_real(char *s)
 				&num_parts,	/* out: number of parts */
 				0,		/* first partition */
 				(unsigned char**)&this_mtd, /* out: extra mem */
-				mtd_id_len + 1 + sizeof(*this_mtd));
+				mtd_id_len + 1 + sizeof(*this_mtd) + 
+				sizeof(void*)-1 /*alignment*/);
 		if(!parts)
 		{
 			/*
@@ -252,6 +253,9 @@ static int mtdpart_setup_real(char *s)
 			 return 0;
 		 }
 
+		/* align this_mtd */
+		this_mtd = (struct cmdline_mtd_partition *) 
+			ALIGN((unsigned long)this_mtd, sizeof(void*));
 		/* enter results */	    
 		this_mtd->parts = parts;
 		this_mtd->num_parts = num_parts;
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index cfe6ccf..4a7a805 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -1,10 +1,9 @@
 /*
- * $Id: block2mtd.c,v 1.23 2005/01/05 17:05:46 dwmw2 Exp $
+ * $Id: block2mtd.c,v 1.28 2005/03/19 22:40:44 gleixner Exp $
  *
  * block2mtd.c - create an mtd from a block device
  *
  * Copyright (C) 2001,2002	Simon Evans <spse@secret.org.uk>
- * Copyright (C) 2004		Gareth Bult <Gareth@Encryptec.net>
  * Copyright (C) 2004,2005	Jörn Engel <joern@wh.fh-wedel.de>
  *
  * Licence: GPL
@@ -20,7 +19,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/buffer_head.h>
 
-#define VERSION "$Revision: 1.23 $"
+#define VERSION "$Revision: 1.28 $"
 
 
 #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
@@ -89,7 +88,6 @@ void cache_readahead(struct address_space *mapping, int index)
 static struct page* page_readahead(struct address_space *mapping, int index)
 {
 	filler_t *filler = (filler_t*)mapping->a_ops->readpage;
-	//do_page_cache_readahead(mapping, index, XXX, 64);
 	cache_readahead(mapping, index);
 	return read_cache_page(mapping, index, filler, NULL);
 }
@@ -157,7 +155,7 @@ static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
 	struct block2mtd_dev *dev = mtd->priv;
 	struct page *page;
 	int index = from >> PAGE_SHIFT;
-	int offset = from & (PAGE_SHIFT-1);
+	int offset = from & (PAGE_SIZE-1);
 	int cpylen;
 
 	if (from > mtd->size)
@@ -370,16 +368,16 @@ static int ustrtoul(const char *cp, char **endp, unsigned int base)
 }
 
 
-static int parse_num32(u32 *num32, const char *token)
+static int parse_num(size_t *num, const char *token)
 {
 	char *endp;
-	unsigned long n;
+	size_t n;
 
-	n = ustrtoul(token, &endp, 0);
+	n = (size_t) ustrtoul(token, &endp, 0);
 	if (*endp)
 		return -EINVAL;
 
-	*num32 = n;
+	*num = n;
 	return 0;
 }
 
@@ -422,7 +420,7 @@ static int block2mtd_setup(const char *val, struct kernel_param *kp)
 	char buf[80+12], *str=buf; /* 80 for device, 12 for erase size */
 	char *token[2];
 	char *name;
-	u32 erase_size = PAGE_SIZE;
+	size_t erase_size = PAGE_SIZE;
 	int i, ret;
 
 	if (strnlen(val, sizeof(buf)) >= sizeof(buf))
@@ -449,7 +447,7 @@ static int block2mtd_setup(const char *val, struct kernel_param *kp)
 		return 0;
 
 	if (token[1]) {
-		ret = parse_num32(&erase_size, token[1]);
+		ret = parse_num(&erase_size, token[1]);
 		if (ret)
 			parse_err("illegal erase size");
 	}
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
index 380ff08..f5026ce 100644
--- a/drivers/mtd/devices/ms02-nv.c
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -6,7 +6,7 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  *
- *	$Id: ms02-nv.c,v 1.8 2005/01/05 18:05:12 dwmw2 Exp $
+ *	$Id: ms02-nv.c,v 1.10 2005/06/20 12:24:41 macro Exp $
  */
 
 #include <linux/init.h>
@@ -99,8 +99,8 @@ static inline uint ms02nv_probe_one(ulong addr)
 	 * The firmware writes MS02NV_ID at MS02NV_MAGIC and also
 	 * a diagnostic status at MS02NV_DIAG.
 	 */
-	ms02nv_diagp = (ms02nv_uint *)(KSEG1ADDR(addr + MS02NV_DIAG));
-	ms02nv_magicp = (ms02nv_uint *)(KSEG1ADDR(addr + MS02NV_MAGIC));
+	ms02nv_diagp = (ms02nv_uint *)(CKSEG1ADDR(addr + MS02NV_DIAG));
+	ms02nv_magicp = (ms02nv_uint *)(CKSEG1ADDR(addr + MS02NV_MAGIC));
 	err = get_dbe(ms02nv_magic, ms02nv_magicp);
 	if (err)
 		return 0;
@@ -233,7 +233,7 @@ static int __init ms02nv_init_one(ulong addr)
 		goto err_out_csr_res;
 	}
 
-	printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %uMiB.\n",
+	printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %zuMiB.\n",
 		mtd->index, ms02nv_name, addr, size >> 20);
 
 	mp->next = root_ms02nv_mtd;
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index edac415..bb713fe 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -1,9 +1,10 @@
 /*
  * mtdram - a test mtd device
- * $Id: mtdram.c,v 1.35 2005/01/05 18:05:12 dwmw2 Exp $
+ * $Id: mtdram.c,v 1.37 2005/04/21 03:42:11 joern Exp $
  * Author: Alexander Larsson <alex@cendio.se>
  *
  * Copyright (c) 1999 Alexander Larsson <alex@cendio.se>
+ * Copyright (c) 2005 Joern Engel <joern@wh.fh-wedel.de>
  *
  * This code is GPL
  *
@@ -18,213 +19,140 @@
 #include <linux/mtd/compatmac.h>
 #include <linux/mtd/mtd.h>
 
-#ifndef CONFIG_MTDRAM_ABS_POS
-  #define CONFIG_MTDRAM_ABS_POS 0
-#endif
-
-#if CONFIG_MTDRAM_ABS_POS > 0
-  #include <asm/io.h>
-#endif
-
-#ifdef MODULE
 static unsigned long total_size = CONFIG_MTDRAM_TOTAL_SIZE;
 static unsigned long erase_size = CONFIG_MTDRAM_ERASE_SIZE;
-module_param(total_size,ulong,0);
-MODULE_PARM_DESC(total_size, "Total device size in KiB");
-module_param(erase_size,ulong,0);
-MODULE_PARM_DESC(erase_size, "Device erase block size in KiB");
 #define MTDRAM_TOTAL_SIZE (total_size * 1024)
 #define MTDRAM_ERASE_SIZE (erase_size * 1024)
-#else
-#define MTDRAM_TOTAL_SIZE (CONFIG_MTDRAM_TOTAL_SIZE * 1024)
-#define MTDRAM_ERASE_SIZE (CONFIG_MTDRAM_ERASE_SIZE * 1024)
-#endif
 
+#ifdef MODULE
+module_param(total_size, ulong, 0);
+MODULE_PARM_DESC(total_size, "Total device size in KiB");
+module_param(erase_size, ulong, 0);
+MODULE_PARM_DESC(erase_size, "Device erase block size in KiB");
+#endif
 
 // We could store these in the mtd structure, but we only support 1 device..
 static struct mtd_info *mtd_info;
 
-
-static int
-ram_erase(struct mtd_info *mtd, struct erase_info *instr)
+static int ram_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
-  DEBUG(MTD_DEBUG_LEVEL2, "ram_erase(pos:%ld, len:%ld)\n", (long)instr->addr, (long)instr->len);
-  if (instr->addr + instr->len > mtd->size) {
-    DEBUG(MTD_DEBUG_LEVEL1, "ram_erase() out of bounds (%ld > %ld)\n", (long)(instr->addr + instr->len), (long)mtd->size);
-    return -EINVAL;
-  }
-	
-  memset((char *)mtd->priv + instr->addr, 0xff, instr->len);
-	
-  instr->state = MTD_ERASE_DONE;
-  mtd_erase_callback(instr);
-
-  return 0;
+	if (instr->addr + instr->len > mtd->size)
+		return -EINVAL;
+
+	memset((char *)mtd->priv + instr->addr, 0xff, instr->len);
+
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+
+	return 0;
 }
 
-static int ram_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf)
+static int ram_point(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u_char **mtdbuf)
 {
-  if (from + len > mtd->size)
-    return -EINVAL;
-	
-  *mtdbuf = mtd->priv + from;
-  *retlen = len;
-  return 0;
+	if (from + len > mtd->size)
+		return -EINVAL;
+
+	*mtdbuf = mtd->priv + from;
+	*retlen = len;
+	return 0;
 }
 
-static void ram_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from,
-			 size_t len)
+static void ram_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from,
+		size_t len)
 {
-  DEBUG(MTD_DEBUG_LEVEL2, "ram_unpoint\n");
 }
 
 static int ram_read(struct mtd_info *mtd, loff_t from, size_t len,
-	     size_t *retlen, u_char *buf)
+		size_t *retlen, u_char *buf)
 {
-  DEBUG(MTD_DEBUG_LEVEL2, "ram_read(pos:%ld, len:%ld)\n", (long)from, (long)len);
-  if (from + len > mtd->size) {
-    DEBUG(MTD_DEBUG_LEVEL1, "ram_read() out of bounds (%ld > %ld)\n", (long)(from + len), (long)mtd->size);
-    return -EINVAL;
-  }
+	if (from + len > mtd->size)
+		return -EINVAL;
 
-  memcpy(buf, mtd->priv + from, len);
+	memcpy(buf, mtd->priv + from, len);
 
-  *retlen=len;
-  return 0;
+	*retlen = len;
+	return 0;
 }
 
 static int ram_write(struct mtd_info *mtd, loff_t to, size_t len,
-	      size_t *retlen, const u_char *buf)
+		size_t *retlen, const u_char *buf)
 {
-  DEBUG(MTD_DEBUG_LEVEL2, "ram_write(pos:%ld, len:%ld)\n", (long)to, (long)len);
-  if (to + len > mtd->size) {
-    DEBUG(MTD_DEBUG_LEVEL1, "ram_write() out of bounds (%ld > %ld)\n", (long)(to + len), (long)mtd->size);
-    return -EINVAL;
-  }
+	if (to + len > mtd->size)
+		return -EINVAL;
 
-  memcpy ((char *)mtd->priv + to, buf, len);
+	memcpy((char *)mtd->priv + to, buf, len);
 
-  *retlen=len;
-  return 0;
+	*retlen = len;
+	return 0;
 }
 
 static void __exit cleanup_mtdram(void)
 {
-  if (mtd_info) {
-    del_mtd_device(mtd_info);
-#if CONFIG_MTDRAM_TOTAL_SIZE > 0
-    if (mtd_info->priv)
-#if CONFIG_MTDRAM_ABS_POS > 0
-      iounmap(mtd_info->priv);
-#else
-      vfree(mtd_info->priv);
-#endif	
-#endif
-    kfree(mtd_info);
-  }
-}
-
-int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, 
-                       unsigned long size, char *name)
-{
-   memset(mtd, 0, sizeof(*mtd));
-
-   /* Setup the MTD structure */
-   mtd->name = name;
-   mtd->type = MTD_RAM;
-   mtd->flags = MTD_CAP_RAM;
-   mtd->size = size;
-   mtd->erasesize = MTDRAM_ERASE_SIZE;
-   mtd->priv = mapped_address;
-
-   mtd->owner = THIS_MODULE;
-   mtd->erase = ram_erase;
-   mtd->point = ram_point;
-   mtd->unpoint = ram_unpoint;
-   mtd->read = ram_read;
-   mtd->write = ram_write;
-
-   if (add_mtd_device(mtd)) {
-     return -EIO;
-   }
-   
-   return 0;
-}
-
-#if CONFIG_MTDRAM_TOTAL_SIZE > 0
-#if CONFIG_MTDRAM_ABS_POS > 0
-static int __init init_mtdram(void)
-{
-  void *addr;
-  int err;
-  /* Allocate some memory */
-   mtd_info = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-   if (!mtd_info)
-     return -ENOMEM;
-   
-  addr = ioremap(CONFIG_MTDRAM_ABS_POS, MTDRAM_TOTAL_SIZE);
-  if (!addr) {
-    DEBUG(MTD_DEBUG_LEVEL1, 
-          "Failed to ioremap) memory region of size %ld at ABS_POS:%ld\n", 
-          (long)MTDRAM_TOTAL_SIZE, (long)CONFIG_MTDRAM_ABS_POS);
-    kfree(mtd_info);
-    mtd_info = NULL;
-    return -ENOMEM;
-  }
-  err = mtdram_init_device(mtd_info, addr, 
-                           MTDRAM_TOTAL_SIZE, "mtdram test device");
-  if (err) 
-  {
-    iounmap(addr);
-    kfree(mtd_info);
-    mtd_info = NULL;
-    return err;
-  }
-  memset(mtd_info->priv, 0xff, MTDRAM_TOTAL_SIZE);
-  return err;
+	if (mtd_info) {
+		del_mtd_device(mtd_info);
+		if (mtd_info->priv)
+			vfree(mtd_info->priv);
+		kfree(mtd_info);
+	}
 }
 
-#else /* CONFIG_MTDRAM_ABS_POS > 0 */
-
-static int __init init_mtdram(void)
+int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
+		unsigned long size, char *name)
 {
-  void *addr;
-  int err;
-  /* Allocate some memory */
-   mtd_info = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-   if (!mtd_info)
-     return -ENOMEM;
-
-  addr = vmalloc(MTDRAM_TOTAL_SIZE);
-  if (!addr) {
-    DEBUG(MTD_DEBUG_LEVEL1, 
-          "Failed to vmalloc memory region of size %ld\n", 
-          (long)MTDRAM_TOTAL_SIZE);
-    kfree(mtd_info);
-    mtd_info = NULL;
-    return -ENOMEM;
-  }
-  err = mtdram_init_device(mtd_info, addr, 
-                           MTDRAM_TOTAL_SIZE, "mtdram test device");
-  if (err) 
-  {
-    vfree(addr);
-    kfree(mtd_info);
-    mtd_info = NULL;
-    return err;
-  }
-  memset(mtd_info->priv, 0xff, MTDRAM_TOTAL_SIZE);
-  return err;
+	memset(mtd, 0, sizeof(*mtd));
+
+	/* Setup the MTD structure */
+	mtd->name = name;
+	mtd->type = MTD_RAM;
+	mtd->flags = MTD_CAP_RAM;
+	mtd->size = size;
+	mtd->erasesize = MTDRAM_ERASE_SIZE;
+	mtd->priv = mapped_address;
+
+	mtd->owner = THIS_MODULE;
+	mtd->erase = ram_erase;
+	mtd->point = ram_point;
+	mtd->unpoint = ram_unpoint;
+	mtd->read = ram_read;
+	mtd->write = ram_write;
+
+	if (add_mtd_device(mtd)) {
+		return -EIO;
+	}
+
+	return 0;
 }
-#endif /* !(CONFIG_MTDRAM_ABS_POS > 0) */
-
-#else /* CONFIG_MTDRAM_TOTAL_SIZE > 0 */
 
 static int __init init_mtdram(void)
 {
-  return 0;
+	void *addr;
+	int err;
+
+	if (!total_size)
+		return -EINVAL;
+
+	/* Allocate some memory */
+	mtd_info = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+	if (!mtd_info)
+		return -ENOMEM;
+
+	addr = vmalloc(MTDRAM_TOTAL_SIZE);
+	if (!addr) {
+		kfree(mtd_info);
+		mtd_info = NULL;
+		return -ENOMEM;
+	}
+	err = mtdram_init_device(mtd_info, addr, MTDRAM_TOTAL_SIZE, "mtdram test device");
+	if (err) {
+		vfree(addr);
+		kfree(mtd_info);
+		mtd_info = NULL;
+		return err;
+	}
+	memset(mtd_info->priv, 0xff, MTDRAM_TOTAL_SIZE);
+	return err;
 }
-#endif /* !(CONFIG_MTDRAM_TOTAL_SIZE > 0) */
 
 module_init(init_mtdram);
 module_exit(cleanup_mtdram);
@@ -232,4 +160,3 @@ module_exit(cleanup_mtdram);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Alexander Larsson <alexl@redhat.com>");
 MODULE_DESCRIPTION("Simulated MTD driver for testing");
-
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 5f8e164..a423a38 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -1,5 +1,5 @@
 /**
- * $Id: phram.c,v 1.11 2005/01/05 18:05:13 dwmw2 Exp $
+ * $Id: phram.c,v 1.14 2005/03/07 21:43:38 joern Exp $
  *
  * Copyright (c) ????		Jochen Schäuble <psionic@psionic.de>
  * Copyright (c) 2003-2004	Jörn Engel <joern@wh.fh-wedel.de>
@@ -15,9 +15,7 @@
  *
  * Example:
  *	phram=swap,64Mi,128Mi phram=test,900Mi,1Mi
- *
  */
-
 #include <asm/io.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -36,7 +34,6 @@ struct phram_mtd_list {
 static LIST_HEAD(phram_list);
 
 
-
 static int phram_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	u_char *start = mtd->priv;
@@ -71,7 +68,8 @@ static int phram_point(struct mtd_info *mtd, loff_t from, size_t len,
 	return 0;
 }
 
-static void phram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void phram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from,
+		size_t len)
 {
 }
 
@@ -80,8 +78,11 @@ static int phram_read(struct mtd_info *mtd, loff_t from, size_t len,
 {
 	u_char *start = mtd->priv;
 
-	if (from + len > mtd->size)
+	if (from >= mtd->size)
 		return -EINVAL;
+
+	if (len > mtd->size - from)
+		len = mtd->size - from;
 	
 	memcpy(buf, start + from, len);
 
@@ -94,8 +95,11 @@ static int phram_write(struct mtd_info *mtd, loff_t to, size_t len,
 {
 	u_char *start = mtd->priv;
 
-	if (to + len > mtd->size)
+	if (to >= mtd->size)
 		return -EINVAL;
+
+	if (len > mtd->size - to)
+		len = mtd->size - to;
 	
 	memcpy(start + to, buf, len);
 
@@ -107,9 +111,9 @@ static int phram_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 static void unregister_devices(void)
 {
-	struct phram_mtd_list *this;
+	struct phram_mtd_list *this, *safe;
 
-	list_for_each_entry(this, &phram_list, list) {
+	list_for_each_entry_safe(this, safe, &phram_list, list) {
 		del_mtd_device(&this->mtd);
 		iounmap(this->mtd.priv);
 		kfree(this);
@@ -145,7 +149,7 @@ static int register_device(char *name, unsigned long start, unsigned long len)
 	new->mtd.write = phram_write;
 	new->mtd.owner = THIS_MODULE;
 	new->mtd.type = MTD_RAM;
-	new->mtd.erasesize = 0;
+	new->mtd.erasesize = PAGE_SIZE;
 
 	ret = -EAGAIN;
 	if (add_mtd_device(&new->mtd)) {
@@ -214,6 +218,15 @@ static int parse_name(char **pname, const char *token)
 	return 0;
 }
 
+
+static inline void kill_final_newline(char *str)
+{
+	char *newline = strrchr(str, '\n');
+	if (newline && !newline[1])
+		*newline = 0;
+}
+
+
 #define parse_err(fmt, args...) do {	\
 	ERROR(fmt , ## args);	\
 	return 0;		\
@@ -232,6 +245,7 @@ static int phram_setup(const char *val, struct kernel_param *kp)
 		parse_err("parameter too long\n");
 
 	strcpy(str, val);
+	kill_final_newline(str);
 
 	for (i=0; i<3; i++)
 		token[i] = strsep(&str, ",");
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 5ab15e6..84fa913 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -1,6 +1,6 @@
 /*======================================================================
 
-  $Id: slram.c,v 1.33 2005/01/05 18:05:13 dwmw2 Exp $
+  $Id: slram.c,v 1.34 2005/01/06 21:16:42 jwboyer Exp $
 
   This driver provides a method to access memory not used by the kernel
   itself (i.e. if the kernel commandline mem=xxx is used). To actually
@@ -50,6 +50,7 @@
 #include <linux/mtd/mtd.h>
 
 #define SLRAM_MAX_DEVICES_PARAMS 6		/* 3 parameters / device */
+#define SLRAM_BLK_SZ 0x4000
 
 #define T(fmt, args...) printk(KERN_DEBUG fmt, ## args)
 #define E(fmt, args...) printk(KERN_NOTICE fmt, ## args)
@@ -108,6 +109,9 @@ static int slram_point(struct mtd_info *mtd, loff_t from, size_t len,
 {
 	slram_priv_t *priv = mtd->priv;
 
+	if (from + len > mtd->size)
+		return -EINVAL;
+
 	*mtdbuf = priv->start + from;
 	*retlen = len;
 	return(0);
@@ -121,7 +125,13 @@ static int slram_read(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, u_char *buf)
 {
 	slram_priv_t *priv = mtd->priv;
-	
+
+	if (from > mtd->size)
+		return -EINVAL;
+
+	if (from + len > mtd->size)
+		len = mtd->size - from;
+
 	memcpy(buf, priv->start + from, len);
 
 	*retlen = len;
@@ -133,6 +143,9 @@ static int slram_write(struct mtd_info *mtd, loff_t to, size_t len,
 {
 	slram_priv_t *priv = mtd->priv;
 
+	if (to + len > mtd->size)
+		return -EINVAL;
+
 	memcpy(priv->start + to, buf, len);
 
 	*retlen = len;
@@ -188,7 +201,7 @@ static int register_device(char *name, unsigned long start, unsigned long length
 	(*curmtd)->mtdinfo->name = name;
 	(*curmtd)->mtdinfo->size = length;
 	(*curmtd)->mtdinfo->flags = MTD_CLEAR_BITS | MTD_SET_BITS |
-					MTD_WRITEB_WRITEABLE | MTD_VOLATILE;
+					MTD_WRITEB_WRITEABLE | MTD_VOLATILE | MTD_CAP_RAM;
         (*curmtd)->mtdinfo->erase = slram_erase;
 	(*curmtd)->mtdinfo->point = slram_point;
 	(*curmtd)->mtdinfo->unpoint = slram_unpoint;
@@ -196,7 +209,7 @@ static int register_device(char *name, unsigned long start, unsigned long length
 	(*curmtd)->mtdinfo->write = slram_write;
 	(*curmtd)->mtdinfo->owner = THIS_MODULE;
 	(*curmtd)->mtdinfo->type = MTD_RAM;
-	(*curmtd)->mtdinfo->erasesize = 0x0;
+	(*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ;
 
 	if (add_mtd_device((*curmtd)->mtdinfo))	{
 		E("slram: Failed to register new device\n");
@@ -261,7 +274,7 @@ static int parse_cmdline(char *devname, char *szstart, char *szlength)
 	}
 	T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n",
 			devname, devstart, devlength);
-	if ((devstart < 0) || (devlength < 0)) {
+	if ((devstart < 0) || (devlength < 0) || (devlength % SLRAM_BLK_SZ != 0)) {
 		E("slram: Illegal start / length parameter.\n");
 		return(-EINVAL);
 	}
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 18cc884..d9ab60b 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -1,5 +1,5 @@
 /* This version ported to the Linux-MTD system by dwmw2@infradead.org
- * $Id: ftl.c,v 1.54 2004/11/16 18:33:15 dwmw2 Exp $
+ * $Id: ftl.c,v 1.55 2005/01/17 13:47:21 hvr Exp $
  *
  * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
  * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups
@@ -357,6 +357,7 @@ static int erase_xfer(partition_t *part,
     if (!erase) 
             return -ENOMEM;
 
+    erase->mtd = part->mbd.mtd;
     erase->callback = ftl_erase_callback;
     erase->addr = xfer->Offset;
     erase->len = 1 << part->header.EraseUnitSize;
@@ -1096,7 +1097,7 @@ struct mtd_blktrans_ops ftl_tr = {
 
 int init_ftl(void)
 {
-	DEBUG(0, "$Id: ftl.c,v 1.54 2004/11/16 18:33:15 dwmw2 Exp $\n");
+	DEBUG(0, "$Id: ftl.c,v 1.55 2005/01/17 13:47:21 hvr Exp $\n");
 
 	return register_mtd_blktrans(&ftl_tr);
 }
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 2bea2e0..44781a8 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,5 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.42 2005/01/05 16:59:50 dwmw2 Exp $
+# $Id: Kconfig,v 1.55 2005/07/02 01:53:24 tpoynor Exp $
 
 menu "Mapping drivers for chip access"
 	depends on MTD!=n
@@ -122,16 +122,6 @@ config MTD_SBC_GXX
 	  More info at
 	  <http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>.
 
-config MTD_ELAN_104NC
-	tristate "CFI Flash device mapped on Arcom ELAN-104NC"
-	depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS
-	help
-	  This provides a driver for the on-board flash of the Arcom Control
-	  System's ELAN-104NC development board. By default the flash
-	  is split into 3 partitions which are accessed as separate MTD
-	  devices. This board utilizes Intel StrataFlash. More info at
-	  <http://www.arcomcontrols.com/products/icp/pc104/processors/ELAN104NC.htm>.
-
 config MTD_LUBBOCK
 	tristate "CFI Flash device mapped on Intel Lubbock XScale eval board"
 	depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS
@@ -139,6 +129,14 @@ config MTD_LUBBOCK
 	  This provides a driver for the on-board flash of the Intel
 	  'Lubbock' XScale evaluation board.
 
+config MTD_MAINSTONE
+	tristate "CFI Flash device mapped on Intel Mainstone XScale eval board"
+	depends on MACH_MAINSTONE && MTD_CFI_INTELEXT
+	select MTD_PARTITIONS
+	help
+	  This provides a driver for the on-board flash of the Intel
+	  'Mainstone PXA27x evaluation board.
+
 config MTD_OCTAGON
 	tristate "JEDEC Flash device mapped on Octagon 5066 SBC"
 	depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
@@ -213,74 +211,11 @@ config MTD_NETtel
 	help
 	  Support for flash chips on NETtel/SecureEdge/SnapGear boards.
 
-config MTD_PB1XXX
-	tristate "Flash devices on Alchemy PB1xxx boards"
-	depends on MIPS && ( MIPS_PB1000 || MIPS_PB1100 || MIPS_PB1500 )
-	help
-	  Flash memory access on Alchemy Pb1000/Pb1100/Pb1500 boards
-
-config MTD_PB1XXX_BOOT
-	bool "PB1x00 boot flash device"
-	depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 )
-	help
-	  Use the first of the two 32MiB flash banks on Pb1100/Pb1500 board.
-	  You can say 'Y' to both this and 'MTD_PB1XXX_USER' below, to use
-	  both banks.
-
-config MTD_PB1XXX_USER
-	bool "PB1x00 user flash device"
-	depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 )
-	default y if MTD_PB1XX_BOOT = n
-	help
-	  Use the second of the two 32MiB flash banks on Pb1100/Pb1500 board.
-	  You can say 'Y' to both this and 'MTD_PB1XXX_BOOT' above, to use
-	  both banks.
-
-config MTD_PB1550
-	tristate "Flash devices on Alchemy PB1550 board"
-	depends on MIPS && MIPS_PB1550
-	help
-	  Flash memory access on Alchemy Pb1550 board
-
-config MTD_PB1550_BOOT
-	bool "PB1550 boot flash device"
-	depends on MTD_PB1550
+config MTD_ALCHEMY
+	tristate '  AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support' 
+	depends on MIPS && SOC_AU1X00
 	help
-	  Use the first of the two 64MiB flash banks on Pb1550 board.
-	  You can say 'Y' to both this and 'MTD_PB1550_USER' below, to use
-	  both banks.
-
-config MTD_PB1550_USER
-	bool "PB1550 user flash device"
-	depends on MTD_PB1550
-	default y if MTD_PB1550_BOOT = n
-	help
-	  Use the second of the two 64MiB flash banks on Pb1550 board.
-	  You can say 'Y' to both this and 'MTD_PB1550_BOOT' above, to use
-	  both banks.
-
-config MTD_DB1550
-	tristate "Flash devices on Alchemy DB1550 board"
-	depends on MIPS && MIPS_DB1550
-	help
-	  Flash memory access on Alchemy Db1550 board
-
-config MTD_DB1550_BOOT
-	bool "DB1550 boot flash device"
-	depends on MTD_DB1550
-	help
-	  Use the first of the two 64MiB flash banks on Db1550 board.
-	  You can say 'Y' to both this and 'MTD_DB1550_USER' below, to use
-	  both banks.
-
-config MTD_DB1550_USER
-	bool "DB1550 user flash device"
-	depends on MTD_DB1550
-	default y if MTD_DB1550_BOOT = n
-	help
-	  Use the second of the two 64MiB flash banks on Db1550 board.
-	  You can say 'Y' to both this and 'MTD_DB1550_BOOT' above, to use
-	  both banks.
+	  Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
 
 config MTD_DILNETPC
 	tristate "CFI Flash device mapped on DIL/Net PC"
@@ -588,6 +523,15 @@ config MTD_MPC1211
 	  This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
 	  If you have such a board, say 'Y'.
 
+config MTD_OMAP_NOR
+	tristate "TI OMAP board mappings"
+	depends on MTD_CFI && ARCH_OMAP
+	help
+	  This enables access to the NOR flash chips on TI OMAP-based
+	  boards defining flash platform devices and flash platform data.
+	  These boards include the Innovator, H2, H3, OSK, Perseus2, and
+	  more.  If you have such a board, say 'Y'.
+
 # This needs CFI or JEDEC, depending on the cards found.
 config MTD_PCI
 	tristate "PCI MTD driver"
@@ -647,13 +591,14 @@ config MTD_DMV182
           Map driver for Dy-4 SVME/DMV-182 board.
 
 config MTD_BAST
-	tristate "Map driver for Simtec BAST (EB2410ITX)"
-	depends on ARCH_BAST
+	tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000"
+	depends on ARCH_BAST || MACH_VR1000
 	select MTD_PARTITIONS
 	select MTD_MAP_BANK_WIDTH_16
 	select MTD_JEDECPROBE
 	help
-	  Map driver for NOR flash on the Simtec BAST (EB2410ITX).
+	  Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the
+	  Thorcom VR1000
 
 	  Note, this driver *cannot* over-ride the WP link on the
 	  board, or currently detect the state of the link.
@@ -669,5 +614,15 @@ config MTD_SHARP_SL
 	help
 	  This enables access to the flash chip on the Sharp SL Series of PDAs.
 
+config MTD_PLATRAM
+	tristate "Map driver for platform device RAM (mtd-ram)"
+	depends on MTD
+	select MTD_RAM
+	help
+	  Map driver for RAM areas described via the platform device
+	  system.
+
+	  This selection automatically selects the map_ram driver.
+
 endmenu
 
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 7ffe02b..7bcbc49 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -1,7 +1,7 @@
 #
 # linux/drivers/maps/Makefile
 #
-# $Id: Makefile.common,v 1.23 2005/01/05 17:06:36 dwmw2 Exp $
+# $Id: Makefile.common,v 1.30 2005/07/02 01:53:24 tpoynor Exp $
 
 ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
 obj-$(CONFIG_MTD)		+= map_funcs.o
@@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
 obj-$(CONFIG_MTD_CSTM_MIPS_IXX)	+= cstm_mips_ixx.o
 obj-$(CONFIG_MTD_DC21285)	+= dc21285.o
 obj-$(CONFIG_MTD_DILNETPC)	+= dilnetpc.o
-obj-$(CONFIG_MTD_ELAN_104NC)	+= elan-104nc.o
 obj-$(CONFIG_MTD_EPXA10DB)	+= epxa10db-flash.o
 obj-$(CONFIG_MTD_IQ80310)	+= iq80310.o
 obj-$(CONFIG_MTD_L440GX)	+= l440gx.o
@@ -23,6 +22,7 @@ obj-$(CONFIG_MTD_AMD76XROM)	+= amd76xrom.o
 obj-$(CONFIG_MTD_ICHXROM)	+= ichxrom.o
 obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
 obj-$(CONFIG_MTD_LUBBOCK)	+= lubbock-flash.o
+obj-$(CONFIG_MTD_MAINSTONE)	+= mainstone-flash.o
 obj-$(CONFIG_MTD_MBX860)	+= mbx860.o
 obj-$(CONFIG_MTD_CEIVA)		+= ceiva.o
 obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
@@ -44,10 +44,7 @@ obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
 obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
 obj-$(CONFIG_MTD_PCI)		+= pci.o
-obj-$(CONFIG_MTD_PB1XXX)	+= pb1xxx-flash.o
-obj-$(CONFIG_MTD_DB1X00)        += db1x00-flash.o
-obj-$(CONFIG_MTD_PB1550)        += pb1550-flash.o
-obj-$(CONFIG_MTD_DB1550)        += db1550-flash.o
+obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
 obj-$(CONFIG_MTD_LASAT)		+= lasat.o
 obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
 obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
@@ -71,3 +68,5 @@ obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
 obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
 obj-$(CONFIG_MTD_DMV182)	+= dmv182.o
 obj-$(CONFIG_MTD_SHARP_SL)	+= sharpsl-flash.o
+obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
+obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c
new file mode 100644
index 0000000..27fd2a3
--- /dev/null
+++ b/drivers/mtd/maps/alchemy-flash.c
@@ -0,0 +1,192 @@
+/*
+ * Flash memory access on AMD Alchemy evaluation boards
+ * 
+ * $Id: alchemy-flash.c,v 1.1 2005/02/27 21:50:21 ppopov Exp $
+ *
+ * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com>
+ * 
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+#ifdef 	DEBUG_RW
+#define	DBG(x...)	printk(x)
+#else
+#define	DBG(x...)	
+#endif
+
+#ifdef CONFIG_MIPS_PB1000
+#define BOARD_MAP_NAME "Pb1000 Flash"
+#define BOARD_FLASH_SIZE 0x00800000 /* 8MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_PB1500
+#define BOARD_MAP_NAME "Pb1500 Flash"
+#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_PB1100
+#define BOARD_MAP_NAME "Pb1100 Flash"
+#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_PB1550
+#define BOARD_MAP_NAME "Pb1550 Flash"
+#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_PB1200
+#define BOARD_MAP_NAME "Pb1200 Flash"
+#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
+#define BOARD_FLASH_WIDTH 2 /* 16-bits */
+#endif
+
+#ifdef CONFIG_MIPS_DB1000
+#define BOARD_MAP_NAME "Db1000 Flash"
+#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_DB1500
+#define BOARD_MAP_NAME "Db1500 Flash"
+#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_DB1100
+#define BOARD_MAP_NAME "Db1100 Flash"
+#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+#define BOARD_MAP_NAME "Db1550 Flash"
+#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#define BOARD_MAP_NAME "Db1200 Flash"
+#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
+#define BOARD_FLASH_WIDTH 2 /* 16-bits */
+#endif
+
+#ifdef CONFIG_MIPS_HYDROGEN3
+#define BOARD_MAP_NAME "Hydrogen3 Flash"
+#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#define USE_LOCAL_ACCESSORS /* why? */
+#endif
+
+#ifdef CONFIG_MIPS_BOSPORUS
+#define BOARD_MAP_NAME "Bosporus Flash"
+#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */
+#define BOARD_FLASH_WIDTH 2 /* 16-bits */
+#endif
+
+#ifdef CONFIG_MIPS_MIRAGE
+#define BOARD_MAP_NAME "Mirage Flash"
+#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#define USE_LOCAL_ACCESSORS /* why? */
+#endif
+
+static struct map_info alchemy_map = {
+	.name =	BOARD_MAP_NAME,
+};
+
+static struct mtd_partition alchemy_partitions[] = {
+        {
+                .name = "User FS",
+                .size = BOARD_FLASH_SIZE - 0x00400000,
+                .offset = 0x0000000
+        },{
+                .name = "YAMON",
+                .size = 0x0100000,
+		.offset = MTDPART_OFS_APPEND,
+                .mask_flags = MTD_WRITEABLE
+        },{
+                .name = "raw kernel",
+		.size = (0x300000 - 0x40000), /* last 256KB is yamon env */
+		.offset = MTDPART_OFS_APPEND,
+        }
+};
+
+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
+
+static struct mtd_info *mymtd;
+
+int __init alchemy_mtd_init(void)
+{
+	struct mtd_partition *parts;
+	int nb_parts = 0;
+	unsigned long window_addr;
+	unsigned long window_size;
+	
+	/* Default flash buswidth */
+	alchemy_map.bankwidth = BOARD_FLASH_WIDTH;
+
+	window_addr = 0x20000000 - BOARD_FLASH_SIZE;
+	window_size = BOARD_FLASH_SIZE;
+#ifdef CONFIG_MIPS_MIRAGE_WHY
+	/* Boot ROM flash bank only; no user bank */
+	window_addr = 0x1C000000;
+	window_size = 0x04000000;
+	/* USERFS from 0x1C00 0000 to 0x1FC00000 */
+	alchemy_partitions[0].size = 0x03C00000;
+#endif
+
+	/*
+	 * Static partition definition selection
+	 */
+	parts = alchemy_partitions;
+	nb_parts = NB_OF(alchemy_partitions);
+	alchemy_map.size = window_size;
+
+	/*
+	 * Now let's probe for the actual flash.  Do it here since
+	 * specific machine settings might have been set above.
+	 */
+	printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n", 
+			alchemy_map.bankwidth*8);
+	alchemy_map.virt = ioremap(window_addr, window_size);
+	mymtd = do_map_probe("cfi_probe", &alchemy_map);
+	if (!mymtd) {
+		iounmap(alchemy_map.virt);
+		return -ENXIO;
+	}
+	mymtd->owner = THIS_MODULE;
+
+	add_mtd_partitions(mymtd, parts, nb_parts);
+	return 0;
+}
+
+static void __exit alchemy_mtd_cleanup(void)
+{
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+		iounmap(alchemy_map.virt);
+	}
+}
+
+module_init(alchemy_mtd_init);
+module_exit(alchemy_mtd_cleanup);
+
+MODULE_AUTHOR("Embedded Alley Solutions, Inc");
+MODULE_DESCRIPTION(BOARD_MAP_NAME " MTD driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 51e97b0..e8a900a 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -2,7 +2,7 @@
  * amd76xrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: amd76xrom.c,v 1.19 2004/11/28 09:40:39 dwmw2 Exp $
+ * $Id: amd76xrom.c,v 1.20 2005/03/18 14:04:35 gleixner Exp $
  */
 
 #include <linux/module.h>
@@ -314,7 +314,7 @@ static int __init init_amd76xrom(void)
 	}
 	return -ENXIO;
 #if 0
-	return pci_module_init(&amd76xrom_driver);
+	return pci_register_driver(&amd76xrom_driver);
 #endif
 }
 
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
index 44de3a8..0c45464 100644
--- a/drivers/mtd/maps/bast-flash.c
+++ b/drivers/mtd/maps/bast-flash.c
@@ -1,14 +1,15 @@
 /* linux/drivers/mtd/maps/bast_flash.c
  *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
  *
  * Simtec Bast (EB2410ITX) NOR MTD Mapping driver
  *
  * Changelog:
  *	20-Sep-2004  BJD  Initial version
+ *	17-Jan-2005  BJD  Add whole device if no partitions found
  *
- * $Id: bast-flash.c,v 1.1 2004/09/21 14:29:04 bjd Exp $
+ * $Id: bast-flash.c,v 1.2 2005/01/18 11:13:47 bjd Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -46,9 +47,9 @@
 #include <asm/arch/bast-cpld.h>
 
 #ifdef CONFIG_MTD_BAST_MAXSIZE
-#define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * (1024*1024))
+#define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * SZ_1M)
 #else
-#define AREA_MAXSIZE (32*1024*1024)
+#define AREA_MAXSIZE (32 * SZ_1M)
 #endif
 
 #define PFX "bast-flash: "
@@ -189,6 +190,8 @@ static int bast_flash_probe(struct device *dev)
 		err = add_mtd_partitions(info->mtd, info->partitions, err);
 		if (err) 
 			printk(KERN_ERR PFX "cannot add/parse partitions\n");
+	} else {
+		err = add_mtd_device(info->mtd);
 	}
 
 	if (err == 0)
diff --git a/drivers/mtd/maps/db1550-flash.c b/drivers/mtd/maps/db1550-flash.c
deleted file mode 100644
index d213888..0000000
--- a/drivers/mtd/maps/db1550-flash.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Flash memory access on Alchemy Db1550 board
- * 
- * $Id: db1550-flash.c,v 1.7 2004/11/04 13:24:14 gleixner Exp $
- *
- * (C) 2004 Embedded Edge, LLC, based on db1550-flash.c:
- * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com>
- * 
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#ifdef 	DEBUG_RW
-#define	DBG(x...)	printk(x)
-#else
-#define	DBG(x...)	
-#endif
-
-static unsigned long window_addr;
-static unsigned long window_size;
-
-
-static struct map_info db1550_map = {
-	.name =	"Db1550 flash",
-};
-
-static unsigned char flash_bankwidth = 4;
-
-/* 
- * Support only 64MB NOR Flash parts
- */
-
-#if defined(CONFIG_MTD_DB1550_BOOT) && defined(CONFIG_MTD_DB1550_USER)
-#define DB1550_BOTH_BANKS
-#elif defined(CONFIG_MTD_DB1550_BOOT) && !defined(CONFIG_MTD_DB1550_USER)
-#define DB1550_BOOT_ONLY
-#elif !defined(CONFIG_MTD_DB1550_BOOT) && defined(CONFIG_MTD_DB1550_USER)
-#define DB1550_USER_ONLY
-#endif
-
-#ifdef DB1550_BOTH_BANKS
-/* both banks will be used. Combine the first bank and the first 
- * part of the second bank together into a single jffs/jffs2
- * partition.
- */
-static struct mtd_partition db1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
-	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size =   (0x1FC00000 - 0x18000000),
-                .offset = 0x0000000
-        },{
-                .name = "yamon",
-                .size = 0x0100000,
-		.offset = MTDPART_OFS_APPEND,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "raw kernel",
-		.size = (0x300000 - 0x40000), /* last 256KB is yamon env */
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(DB1550_BOOT_ONLY)
-static struct mtd_partition db1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size =   0x03c00000,
-                .offset = 0x0000000
-        },{
-                .name = "yamon",
-                .size = 0x0100000,
-		.offset = MTDPART_OFS_APPEND,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "raw kernel",
-		.size = (0x300000-0x40000), /* last 256KB is yamon env */
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(DB1550_USER_ONLY)
-static struct mtd_partition db1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size = (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */
-                .offset = 0x0000000
-        },{
-                .name = "raw kernel",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#else
-#error MTD_DB1550 define combo error /* should never happen */
-#endif
-
-#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-
-static struct mtd_info *mymtd;
-
-/*
- * Probe the flash density and setup window address and size
- * based on user CONFIG options. There are times when we don't
- * want the MTD driver to be probing the boot or user flash,
- * so having the option to enable only one bank is important.
- */
-int setup_flash_params(void)
-{
-#if defined(DB1550_BOTH_BANKS)
-			window_addr = 0x18000000;
-			window_size = 0x8000000; 
-#elif defined(DB1550_BOOT_ONLY)
-			window_addr = 0x1C000000;
-			window_size = 0x4000000; 
-#else /* USER ONLY */
-			window_addr = 0x18000000;
-			window_size = 0x4000000; 
-#endif
-	return 0;
-}
-
-int __init db1550_mtd_init(void)
-{
-	struct mtd_partition *parts;
-	int nb_parts = 0;
-	
-	/* Default flash bankwidth */
-	db1550_map.bankwidth = flash_bankwidth;
-
-	if (setup_flash_params()) 
-		return -ENXIO;
-
-	/*
-	 * Static partition definition selection
-	 */
-	parts = db1550_partitions;
-	nb_parts = NB_OF(db1550_partitions);
-	db1550_map.size = window_size;
-
-	/*
-	 * Now let's probe for the actual flash.  Do it here since
-	 * specific machine settings might have been set above.
-	 */
-	printk(KERN_NOTICE "Db1550 flash: probing %d-bit flash bus\n", 
-			db1550_map.bankwidth*8);
-	db1550_map.virt = ioremap(window_addr, window_size);
-	mymtd = do_map_probe("cfi_probe", &db1550_map);
-	if (!mymtd) return -ENXIO;
-	mymtd->owner = THIS_MODULE;
-
-	add_mtd_partitions(mymtd, parts, nb_parts);
-	return 0;
-}
-
-static void __exit db1550_mtd_cleanup(void)
-{
-	if (mymtd) {
-		del_mtd_partitions(mymtd);
-		map_destroy(mymtd);
-		iounmap((void *) db1550_map.virt);
-	}
-}
-
-module_init(db1550_mtd_init);
-module_exit(db1550_mtd_cleanup);
-
-MODULE_AUTHOR("Embedded Edge, LLC");
-MODULE_DESCRIPTION("Db1550 mtd map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/db1x00-flash.c b/drivers/mtd/maps/db1x00-flash.c
deleted file mode 100644
index faa68ec..0000000
--- a/drivers/mtd/maps/db1x00-flash.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Flash memory access on Alchemy Db1xxx boards
- * 
- * $Id: db1x00-flash.c,v 1.6 2004/11/04 13:24:14 gleixner Exp $
- *
- * (C) 2003 Pete Popov <ppopov@embeddedalley.com>
- * 
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#ifdef 	DEBUG_RW
-#define	DBG(x...)	printk(x)
-#else
-#define	DBG(x...)	
-#endif
-
-/* MTD CONFIG OPTIONS */
-#if defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER)
-#define DB1X00_BOTH_BANKS
-#elif defined(CONFIG_MTD_DB1X00_BOOT) && !defined(CONFIG_MTD_DB1X00_USER)
-#define DB1X00_BOOT_ONLY
-#elif !defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER)
-#define DB1X00_USER_ONLY
-#endif
-
-static unsigned long window_addr;
-static unsigned long window_size;
-static unsigned long flash_size;
-
-static unsigned short *bcsr = (unsigned short *)0xAE000000;
-static unsigned char flash_bankwidth = 4;
-
-/* 
- * The Db1x boards support different flash densities. We setup
- * the mtd_partition structures below for default of 64Mbit 
- * flash densities, and override the partitions sizes, if
- * necessary, after we check the board status register.
- */
-
-#ifdef DB1X00_BOTH_BANKS
-/* both banks will be used. Combine the first bank and the first 
- * part of the second bank together into a single jffs/jffs2
- * partition.
- */
-static struct mtd_partition db1x00_partitions[] = {
-        {
-                .name         =  "User FS",
-                .size         =  0x1c00000,
-                .offset       =  0x0000000
-        },{
-                .name         =  "yamon",
-                .size         =  0x0100000,
-		.offset       =  MTDPART_OFS_APPEND,
-                .mask_flags   =  MTD_WRITEABLE
-        },{
-                .name         =  "raw kernel",
-		.size         =  (0x300000-0x40000), /* last 256KB is env */
-		.offset       =  MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(DB1X00_BOOT_ONLY)
-static struct mtd_partition db1x00_partitions[] = {
-        {
-                .name         =  "User FS",
-                .size         =  0x00c00000,
-                .offset       =  0x0000000
-        },{
-                .name         =  "yamon",
-                .size         =  0x0100000,
-		.offset       =  MTDPART_OFS_APPEND,
-                .mask_flags   =  MTD_WRITEABLE
-        },{
-                .name         =  "raw kernel",
-		.size         =  (0x300000-0x40000), /* last 256KB is env */
-		.offset       =  MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(DB1X00_USER_ONLY)
-static struct mtd_partition db1x00_partitions[] = {
-        {
-                .name         =  "User FS",
-                .size         =  0x0e00000,
-                .offset       =  0x0000000
-        },{
-                .name         =  "raw kernel",
-		.size         =  MTDPART_SIZ_FULL,
-		.offset       =  MTDPART_OFS_APPEND,
-        }
-};
-#else
-#error MTD_DB1X00 define combo error /* should never happen */
-#endif
-#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-
-#define NAME     	"Db1x00 Linux Flash"
-
-static struct map_info db1xxx_mtd_map = {
-	.name		= NAME,
-};
-
-static struct mtd_partition *parsed_parts;
-static struct mtd_info *db1xxx_mtd;
-
-/*
- * Probe the flash density and setup window address and size
- * based on user CONFIG options. There are times when we don't
- * want the MTD driver to be probing the boot or user flash,
- * so having the option to enable only one bank is important.
- */
-int setup_flash_params(void)
-{
-	switch ((bcsr[2] >> 14) & 0x3) {
-		case 0: /* 64Mbit devices */
-			flash_size = 0x800000; /* 8MB per part */
-#if defined(DB1X00_BOTH_BANKS)
-			window_addr = 0x1E000000;
-			window_size = 0x2000000; 
-#elif defined(DB1X00_BOOT_ONLY)
-			window_addr = 0x1F000000;
-			window_size = 0x1000000; 
-#else /* USER ONLY */
-			window_addr = 0x1E000000;
-			window_size = 0x1000000; 
-#endif
-			break;
-		case 1:
-			/* 128 Mbit devices */
-			flash_size = 0x1000000; /* 16MB per part */
-#if defined(DB1X00_BOTH_BANKS)
-			window_addr = 0x1C000000;
-			window_size = 0x4000000;
-			/* USERFS from 0x1C00 0000 to 0x1FC0 0000 */
-			db1x00_partitions[0].size = 0x3C00000;
-#elif defined(DB1X00_BOOT_ONLY)
-			window_addr = 0x1E000000;
-			window_size = 0x2000000;
-			/* USERFS from 0x1E00 0000 to 0x1FC0 0000 */
-			db1x00_partitions[0].size = 0x1C00000;
-#else /* USER ONLY */
-			window_addr = 0x1C000000;
-			window_size = 0x2000000;
-			/* USERFS from 0x1C00 0000 to 0x1DE00000 */
-			db1x00_partitions[0].size = 0x1DE0000;
-#endif
-			break;
-		case 2:
-			/* 256 Mbit devices */
-			flash_size = 0x4000000; /* 64MB per part */
-#if defined(DB1X00_BOTH_BANKS)
-			return 1;
-#elif defined(DB1X00_BOOT_ONLY)
-			/* Boot ROM flash bank only; no user bank */
-			window_addr = 0x1C000000;
-			window_size = 0x4000000;
-			/* USERFS from 0x1C00 0000 to 0x1FC00000 */
-			db1x00_partitions[0].size = 0x3C00000;
-#else /* USER ONLY */
-			return 1;
-#endif
-			break;
-		default:
-			return 1;
-	}
-	db1xxx_mtd_map.size = window_size;
-	db1xxx_mtd_map.bankwidth = flash_bankwidth;
-	db1xxx_mtd_map.phys = window_addr;
-	db1xxx_mtd_map.bankwidth = flash_bankwidth;
-	return 0;
-}
-
-int __init db1x00_mtd_init(void)
-{
-	struct mtd_partition *parts;
-	int nb_parts = 0;
-	
-	if (setup_flash_params()) 
-		return -ENXIO;
-
-	/*
-	 * Static partition definition selection
-	 */
-	parts = db1x00_partitions;
-	nb_parts = NB_OF(db1x00_partitions);
-
-	/*
-	 * Now let's probe for the actual flash.  Do it here since
-	 * specific machine settings might have been set above.
-	 */
-	printk(KERN_NOTICE "Db1xxx flash: probing %d-bit flash bus\n", 
-			db1xxx_mtd_map.bankwidth*8);
-	db1xxx_mtd_map.virt = ioremap(window_addr, window_size);
-	db1xxx_mtd = do_map_probe("cfi_probe", &db1xxx_mtd_map);
-	if (!db1xxx_mtd) return -ENXIO;
-	db1xxx_mtd->owner = THIS_MODULE;
-
-	add_mtd_partitions(db1xxx_mtd, parts, nb_parts);
-	return 0;
-}
-
-static void __exit db1x00_mtd_cleanup(void)
-{
-	if (db1xxx_mtd) {
-		del_mtd_partitions(db1xxx_mtd);
-		map_destroy(db1xxx_mtd);
-		if (parsed_parts)
-			kfree(parsed_parts);
-	}
-}
-
-module_init(db1x00_mtd_init);
-module_exit(db1x00_mtd_cleanup);
-
-MODULE_AUTHOR("Pete Popov");
-MODULE_DESCRIPTION("Db1x00 mtd map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/elan-104nc.c b/drivers/mtd/maps/elan-104nc.c
deleted file mode 100644
index e9465f5..0000000
--- a/drivers/mtd/maps/elan-104nc.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/* elan-104nc.c -- MTD map driver for Arcom Control Systems ELAN-104NC
- 
-   Copyright (C) 2000 Arcom Control System Ltd
- 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
- 
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
- 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
-
-   $Id: elan-104nc.c,v 1.25 2004/11/28 09:40:39 dwmw2 Exp $
-
-The ELAN-104NC has up to 8 Mibyte of Intel StrataFlash (28F320/28F640) in x16
-mode.  This drivers uses the CFI probe and Intel Extended Command Set drivers.
-
-The flash is accessed as follows:
-
-   32 kbyte memory window at 0xb0000-0xb7fff
-   
-   16 bit I/O port (0x22) for some sort of paging.
-
-The single flash device is divided into 3 partition which appear as separate
-MTD devices.
-
-Linux thinks that the I/O port is used by the PIC and hence check_region() will
-always fail.  So we don't do it.  I just hope it doesn't break anything.
-*/
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <asm/io.h>
-
-#include <linux/mtd/map.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define WINDOW_START 0xb0000
-/* Number of bits in offset. */
-#define WINDOW_SHIFT 15
-#define WINDOW_LENGTH (1 << WINDOW_SHIFT)
-/* The bits for the offset into the window. */
-#define WINDOW_MASK (WINDOW_LENGTH-1)
-#define PAGE_IO 0x22
-#define PAGE_IO_SIZE 2
-
-static volatile int page_in_window = -1; // Current page in window.
-static void __iomem *iomapadr;
-static DEFINE_SPINLOCK(elan_104nc_spin);
-
-/* partition_info gives details on the logical partitions that the split the 
- * single flash device into. If the size if zero we use up to the end of the
- * device. */
-static struct mtd_partition partition_info[]={
-    { .name = "ELAN-104NC flash boot partition", 
-      .offset = 0, 
-      .size = 640*1024 },
-    { .name = "ELAN-104NC flash partition 1", 
-      .offset = 640*1024, 
-      .size = 896*1024 },
-    { .name = "ELAN-104NC flash partition 2", 
-      .offset = (640+896)*1024 }
-};
-#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
-
-/*
- * If no idea what is going on here.  This is taken from the FlashFX stuff.
- */
-#define ROMCS 1
-
-static inline void elan_104nc_setup(void)
-{
-    u16 t;
-
-    outw( 0x0023 + ROMCS*2, PAGE_IO );
-    t=inb( PAGE_IO+1 );
-
-    t=(t & 0xf9) | 0x04;
-
-    outw( ((0x0023 + ROMCS*2) | (t << 8)), PAGE_IO );
-}
-
-static inline void elan_104nc_page(struct map_info *map, unsigned long ofs)
-{
-	unsigned long page = ofs >> WINDOW_SHIFT;
-       
-	if( page!=page_in_window ) {
-		int cmd1;
-		int cmd2;
-
-		cmd1=(page & 0x700) + 0x0833 + ROMCS*0x4000;
-		cmd2=((page & 0xff) << 8) + 0x0032;
-
-		outw( cmd1, PAGE_IO );
-		outw( cmd2, PAGE_IO );
-
-		page_in_window = page;
-	}
-}
-
-
-static map_word elan_104nc_read16(struct map_info *map, unsigned long ofs)
-{
-	map_word ret;
-	spin_lock(&elan_104nc_spin);
-	elan_104nc_page(map, ofs);
-	ret.x[0] = readw(iomapadr + (ofs & WINDOW_MASK));
-	spin_unlock(&elan_104nc_spin);
-	return ret;
-}
-
-static void elan_104nc_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
-	while (len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
-		
-		spin_lock(&elan_104nc_spin);
-		elan_104nc_page(map, from);
-		memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen);
-		spin_unlock(&elan_104nc_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static void elan_104nc_write16(struct map_info *map, map_word d, unsigned long adr)
-{
-	spin_lock(&elan_104nc_spin);
-	elan_104nc_page(map, adr);
-	writew(d.x[0], iomapadr + (adr & WINDOW_MASK));
-	spin_unlock(&elan_104nc_spin);
-}
-
-static void elan_104nc_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{	
-	while(len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
-		
-		spin_lock(&elan_104nc_spin);
-		elan_104nc_page(map, to);
-		memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen);
-		spin_unlock(&elan_104nc_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static struct map_info elan_104nc_map = {
-	.name = "ELAN-104NC flash",
-	.phys = NO_XIP,
-	.size = 8*1024*1024, /* this must be set to a maximum possible amount
-			of flash so the cfi probe routines find all
-			the chips */
-	.bankwidth = 2,
-	.read = elan_104nc_read16,
-	.copy_from = elan_104nc_copy_from,
-	.write = elan_104nc_write16,
-	.copy_to = elan_104nc_copy_to
-};
-
-/* MTD device for all of the flash. */
-static struct mtd_info *all_mtd;
-
-static void cleanup_elan_104nc(void)
-{
-	if( all_mtd ) {
-		del_mtd_partitions( all_mtd );
-		map_destroy( all_mtd );
-	}
-
-	iounmap(iomapadr);
-}
-
-static int __init init_elan_104nc(void)
-{
-	/* Urg! We use I/O port 0x22 without request_region()ing it,
-	   because it's already allocated to the PIC. */
-
-  	iomapadr = ioremap(WINDOW_START, WINDOW_LENGTH);
-	if (!iomapadr) {
-		printk( KERN_ERR"%s: failed to ioremap memory region\n",
-			elan_104nc_map.name );
-		return -EIO;
-	}
-
-	printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
-		elan_104nc_map.name,
-		PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1,
-		WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 );
-
-	elan_104nc_setup();
-
-	/* Probe for chip. */
-	all_mtd = do_map_probe("cfi_probe",  &elan_104nc_map );
-	if( !all_mtd ) {
-		cleanup_elan_104nc();
-		return -ENXIO;
-	}
-	
-	all_mtd->owner = THIS_MODULE;
-
-	/* Create MTD devices for each partition. */
-	add_mtd_partitions( all_mtd, partition_info, NUM_PARTITIONS );
-
-	return 0;
-}
-
-module_init(init_elan_104nc);
-module_exit(cleanup_elan_104nc);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Arcom Control Systems Ltd.");
-MODULE_DESCRIPTION("MTD map driver for Arcom Control Systems ELAN-104NC");
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index 29d1cc1..e505207 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -2,7 +2,7 @@
  * ichxrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: ichxrom.c,v 1.16 2004/11/28 09:40:39 dwmw2 Exp $
+ * $Id: ichxrom.c,v 1.18 2005/07/07 10:26:20 dwmw2 Exp $
  */
 
 #include <linux/module.h>
@@ -338,9 +338,9 @@ static struct pci_device_id ichxrom_pci_tbl[] __devinitdata = {
 	{ 0, },
 };
 
+#if 0
 MODULE_DEVICE_TABLE(pci, ichxrom_pci_tbl);
 
-#if 0
 static struct pci_driver ichxrom_driver = {
 	.name =		MOD_NAME,
 	.id_table =	ichxrom_pci_tbl,
@@ -366,7 +366,7 @@ static int __init init_ichxrom(void)
 	}
 	return -ENXIO;
 #if 0
-	return pci_module_init(&ichxrom_driver);
+	return pci_register_driver(&ichxrom_driver);
 #endif
 }
 
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index c5b5f44..3e94b61 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -1,5 +1,5 @@
 /*
- * $Id: ixp2000.c,v 1.5 2004/11/16 17:15:48 dsaxena Exp $
+ * $Id: ixp2000.c,v 1.6 2005/03/18 14:07:46 gleixner Exp $
  *
  * drivers/mtd/maps/ixp2000.c
  *
@@ -216,11 +216,6 @@ static int ixp2000_flash_probe(struct device *_dev)
 		goto Error;
 	}
 
-	/*
-	 * Setup read mode for FLASH
-	 */
-	*IXP2000_SLOWPORT_FRM = 1;
-
 #if defined(__ARMEB__)
 	/*
 	 * Enable erratum 44 workaround for NPUs with broken slowport
diff --git a/drivers/mtd/maps/mainstone-flash.c b/drivers/mtd/maps/mainstone-flash.c
new file mode 100644
index 0000000..87e93fa
--- /dev/null
+++ b/drivers/mtd/maps/mainstone-flash.c
@@ -0,0 +1,178 @@
+/*
+ * $Id:  $
+ *
+ * Map driver for the Mainstone developer platform.
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mainstone.h>
+
+
+#define ROM_ADDR	0x00000000
+#define FLASH_ADDR	0x04000000
+
+#define WINDOW_SIZE 	0x04000000
+
+static void mainstone_map_inval_cache(struct map_info *map, unsigned long from,
+				      ssize_t len)
+{
+	consistent_sync((char *)map->cached + from, len, DMA_FROM_DEVICE);
+}
+
+static struct map_info mainstone_maps[2] = { {
+	.size =		WINDOW_SIZE,
+	.phys =		PXA_CS0_PHYS,
+	.inval_cache = 	mainstone_map_inval_cache,
+}, {
+	.size =		WINDOW_SIZE,
+	.phys =		PXA_CS1_PHYS,
+	.inval_cache = 	mainstone_map_inval_cache,
+} };
+
+static struct mtd_partition mainstone_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x00400000,
+		.offset =	0x00040000,
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00440000
+	}
+};
+
+static struct mtd_info *mymtds[2];
+static struct mtd_partition *parsed_parts[2];
+static int nr_parsed_parts[2];
+
+static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+
+static int __init init_mainstone(void)
+{
+	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
+	int ret = 0, i;
+
+	mainstone_maps[0].bankwidth = (BOOT_DEF & 1) ? 2 : 4;
+	mainstone_maps[1].bankwidth = 4;
+
+	/* Compensate for SW7 which swaps the flash banks */
+	mainstone_maps[SW7].name = "processor flash";
+	mainstone_maps[SW7 ^ 1].name = "main board flash";
+
+	printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
+	       mainstone_maps[0].name);
+
+	for (i = 0; i < 2; i++) {
+		mainstone_maps[i].virt = ioremap(mainstone_maps[i].phys,
+						 WINDOW_SIZE);
+		if (!mainstone_maps[i].virt) {
+			printk(KERN_WARNING "Failed to ioremap %s\n", 
+			       mainstone_maps[i].name);
+			if (!ret)
+				ret = -ENOMEM;
+			continue;
+		}
+		mainstone_maps[i].cached = 
+			ioremap_cached(mainstone_maps[i].phys, WINDOW_SIZE);
+		if (!mainstone_maps[i].cached)
+			printk(KERN_WARNING "Failed to ioremap cached %s\n",
+			       mainstone_maps[i].name);
+		simple_map_init(&mainstone_maps[i]);
+
+		printk(KERN_NOTICE 
+		       "Probing %s at physical address 0x%08lx"
+		       " (%d-bit bankwidth)\n",
+		       mainstone_maps[i].name, mainstone_maps[i].phys, 
+		       mainstone_maps[i].bankwidth * 8);
+
+		mymtds[i] = do_map_probe("cfi_probe", &mainstone_maps[i]);
+		
+		if (!mymtds[i]) {
+			iounmap((void *)mainstone_maps[i].virt);
+			if (mainstone_maps[i].cached)
+				iounmap(mainstone_maps[i].cached);
+			if (!ret)
+				ret = -EIO;
+			continue;
+		}
+		mymtds[i]->owner = THIS_MODULE;
+
+		ret = parse_mtd_partitions(mymtds[i], probes,
+					   &parsed_parts[i], 0);
+
+		if (ret > 0)
+			nr_parsed_parts[i] = ret;
+	}
+
+	if (!mymtds[0] && !mymtds[1])
+		return ret;
+	
+	for (i = 0; i < 2; i++) {
+		if (!mymtds[i]) {
+			printk(KERN_WARNING "%s is absent. Skipping\n", 
+			       mainstone_maps[i].name);
+		} else if (nr_parsed_parts[i]) {
+			add_mtd_partitions(mymtds[i], parsed_parts[i], 
+					   nr_parsed_parts[i]);
+		} else if (!i) {
+			printk("Using static partitions on %s\n",
+			       mainstone_maps[i].name);
+			add_mtd_partitions(mymtds[i], mainstone_partitions, 
+					   ARRAY_SIZE(mainstone_partitions));
+		} else {
+			printk("Registering %s as whole device\n", 
+			       mainstone_maps[i].name);
+			add_mtd_device(mymtds[i]);
+		}
+	}
+	return 0;
+}
+
+static void __exit cleanup_mainstone(void)
+{
+	int i;
+	for (i = 0; i < 2; i++) {
+		if (!mymtds[i])
+			continue;
+
+		if (nr_parsed_parts[i] || !i)
+			del_mtd_partitions(mymtds[i]);
+		else
+			del_mtd_device(mymtds[i]);
+
+		map_destroy(mymtds[i]);
+		iounmap((void *)mainstone_maps[i].virt);
+		if (mainstone_maps[i].cached)
+			iounmap(mainstone_maps[i].cached);
+		kfree(parsed_parts[i]);
+	}
+}
+
+module_init(init_mainstone);
+module_exit(cleanup_mainstone);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
+MODULE_DESCRIPTION("MTD map driver for Intel Mainstone");
diff --git a/drivers/mtd/maps/map_funcs.c b/drivers/mtd/maps/map_funcs.c
index 38f6a7a..9105e6c 100644
--- a/drivers/mtd/maps/map_funcs.c
+++ b/drivers/mtd/maps/map_funcs.c
@@ -1,5 +1,5 @@
 /*
- * $Id: map_funcs.c,v 1.9 2004/07/13 22:33:15 dwmw2 Exp $
+ * $Id: map_funcs.c,v 1.10 2005/06/06 23:04:36 tpoynor Exp $
  *
  * Out-of-line map I/O functions for simple maps when CONFIG_COMPLEX_MAPPINGS
  * is enabled.
@@ -9,23 +9,24 @@
 #include <linux/module.h>
 
 #include <linux/mtd/map.h>
+#include <linux/mtd/xip.h>
 
-static map_word simple_map_read(struct map_info *map, unsigned long ofs)
+static map_word __xipram simple_map_read(struct map_info *map, unsigned long ofs)
 {
 	return inline_map_read(map, ofs);
 }
 
-static void simple_map_write(struct map_info *map, const map_word datum, unsigned long ofs)
+static void __xipram simple_map_write(struct map_info *map, const map_word datum, unsigned long ofs)
 {
 	inline_map_write(map, datum, ofs);
 }
 
-static void simple_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+static void __xipram simple_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
 {
 	inline_map_copy_from(map, to, from, len);
 }
 
-static void simple_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+static void __xipram simple_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
 {
 	inline_map_copy_to(map, to, from, len);
 }
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
new file mode 100644
index 0000000..8cc7140
--- /dev/null
+++ b/drivers/mtd/maps/omap_nor.c
@@ -0,0 +1,179 @@
+/*
+ * Flash memory support for various TI OMAP boards
+ *
+ * Copyright (C) 2001-2002 MontaVista Software Inc.
+ * Copyright (C) 2003-2004 Texas Instruments
+ * Copyright (C) 2004 Nokia Corporation 
+ *
+ *	Assembled using driver code copyright the companies above
+ *	and written by David Brownell, Jian Zhang <jzhang@ti.com>,
+ * 	Tony Lindgren <tony@atomide.com> and others.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/flash.h>
+#include <asm/arch/tc.h>
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL };
+#endif
+
+struct omapflash_info {
+	struct mtd_partition	*parts;
+	struct mtd_info		*mtd;
+	struct map_info		map;
+};
+
+static void omap_set_vpp(struct map_info *map, int enable)
+{
+	static int	count;
+
+	if (enable) {
+		if (count++ == 0)
+			OMAP_EMIFS_CONFIG_REG |= OMAP_EMIFS_CONFIG_WP;
+	} else {
+		if (count && (--count == 0))
+			OMAP_EMIFS_CONFIG_REG &= ~OMAP_EMIFS_CONFIG_WP;
+	}
+}
+
+static int __devinit omapflash_probe(struct device *dev)
+{
+	int err;
+	struct omapflash_info *info;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct flash_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *res = pdev->resource;
+	unsigned long size = res->end - res->start + 1;
+
+	info = kmalloc(sizeof(struct omapflash_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	memset(info, 0, sizeof(struct omapflash_info));
+
+	if (!request_mem_region(res->start, size, "flash")) {
+		err = -EBUSY;
+		goto out_free_info;
+	}
+
+	info->map.virt		= ioremap(res->start, size);
+	if (!info->map.virt) {
+		err = -ENOMEM;
+		goto out_release_mem_region;
+	}
+	info->map.name		= pdev->dev.bus_id;
+	info->map.phys		= res->start;
+	info->map.size		= size;
+	info->map.bankwidth	= pdata->width;
+	info->map.set_vpp	= omap_set_vpp;
+
+	simple_map_init(&info->map);
+	info->mtd = do_map_probe(pdata->map_name, &info->map);
+	if (!info->mtd) {
+		err = -EIO;
+		goto out_iounmap;
+	}
+	info->mtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0);
+	if (err > 0)
+		add_mtd_partitions(info->mtd, info->parts, err);
+	else if (err < 0 && pdata->parts)
+		add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
+	else
+#endif
+		add_mtd_device(info->mtd);
+
+	dev_set_drvdata(&pdev->dev, info);
+
+	return 0;
+
+out_iounmap:
+	iounmap(info->map.virt);
+out_release_mem_region:
+	release_mem_region(res->start, size);
+out_free_info:
+	kfree(info);
+
+	return err;
+}
+
+static int __devexit omapflash_remove(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omapflash_info *info = dev_get_drvdata(&pdev->dev);
+
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	if (info) {
+		if (info->parts) {
+			del_mtd_partitions(info->mtd);
+			kfree(info->parts);
+		} else
+			del_mtd_device(info->mtd);
+		map_destroy(info->mtd);
+		release_mem_region(info->map.phys, info->map.size);
+		iounmap((void __iomem *) info->map.virt);
+		kfree(info);
+	}
+
+	return 0;
+}
+
+static struct device_driver omapflash_driver = {
+	.name	= "omapflash",
+	.bus	= &platform_bus_type,
+	.probe	= omapflash_probe,
+	.remove	= __devexit_p(omapflash_remove),
+};
+
+static int __init omapflash_init(void)
+{
+	return driver_register(&omapflash_driver);
+}
+
+static void __exit omapflash_exit(void)
+{
+	driver_unregister(&omapflash_driver);
+}
+
+module_init(omapflash_init);
+module_exit(omapflash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD NOR map driver for TI OMAP boards");
+
diff --git a/drivers/mtd/maps/pb1550-flash.c b/drivers/mtd/maps/pb1550-flash.c
deleted file mode 100644
index 1424726a..0000000
--- a/drivers/mtd/maps/pb1550-flash.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Flash memory access on Alchemy Pb1550 board
- * 
- * $Id: pb1550-flash.c,v 1.6 2004/11/04 13:24:15 gleixner Exp $
- *
- * (C) 2004 Embedded Edge, LLC, based on pb1550-flash.c:
- * (C) 2003 Pete Popov <ppopov@pacbell.net>
- * 
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/au1000.h>
-#include <asm/pb1550.h>
-
-#ifdef 	DEBUG_RW
-#define	DBG(x...)	printk(x)
-#else
-#define	DBG(x...)	
-#endif
-
-static unsigned long window_addr;
-static unsigned long window_size;
-
-
-static struct map_info pb1550_map = {
-	.name =	"Pb1550 flash",
-};
-
-static unsigned char flash_bankwidth = 4;
-
-/* 
- * Support only 64MB NOR Flash parts
- */
-
-#ifdef PB1550_BOTH_BANKS
-/* both banks will be used. Combine the first bank and the first 
- * part of the second bank together into a single jffs/jffs2
- * partition.
- */
-static struct mtd_partition pb1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
-	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size =   (0x1FC00000 - 0x18000000),
-                .offset = 0x0000000
-        },{
-                .name = "yamon",
-                .size = 0x0100000,
-		.offset = MTDPART_OFS_APPEND,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "raw kernel",
-		.size = (0x300000 - 0x40000), /* last 256KB is yamon env */
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(PB1550_BOOT_ONLY)
-static struct mtd_partition pb1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size =   0x03c00000,
-                .offset = 0x0000000
-        },{
-                .name = "yamon",
-                .size = 0x0100000,
-		.offset = MTDPART_OFS_APPEND,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "raw kernel",
-		.size = (0x300000-0x40000), /* last 256KB is yamon env */
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#elif defined(PB1550_USER_ONLY)
-static struct mtd_partition pb1550_partitions[] = {
-	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
-	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
-	 */
-        {
-                .name = "User FS",
-                .size = (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */
-                .offset = 0x0000000
-        },{
-                .name = "raw kernel",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-        }
-};
-#else
-#error MTD_PB1550 define combo error /* should never happen */
-#endif
-
-#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
-
-static struct mtd_info *mymtd;
-
-/*
- * Probe the flash density and setup window address and size
- * based on user CONFIG options. There are times when we don't
- * want the MTD driver to be probing the boot or user flash,
- * so having the option to enable only one bank is important.
- */
-int setup_flash_params(void)
-{
-	u16 boot_swapboot;
-	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) | 
-		((bcsr->status >> 6)  & 0x1);
-	printk("Pb1550 MTD: boot:swap %d\n", boot_swapboot);
-
-	switch (boot_swapboot) {
-		case 0: /* 512Mbit devices, both enabled */
-		case 1: 
-		case 8:
-		case 9: 
-#if defined(PB1550_BOTH_BANKS)
-			window_addr = 0x18000000;
-			window_size = 0x8000000; 
-#elif defined(PB1550_BOOT_ONLY)
-			window_addr = 0x1C000000;
-			window_size = 0x4000000; 
-#else /* USER ONLY */
-			window_addr = 0x1E000000;
-			window_size = 0x4000000; 
-#endif
-			break;
-		case 0xC:
-		case 0xD:
-		case 0xE:
-		case 0xF: 
-			/* 64 MB Boot NOR Flash is disabled */
-			/* and the start address is moved to 0x0C00000 */
-			window_addr = 0x0C000000;
-			window_size = 0x4000000; 
-		default:
-			printk("Pb1550 MTD: unsupported boot:swap setting\n");
-			return 1;
-	}
-	return 0;
-}
-
-int __init pb1550_mtd_init(void)
-{
-	struct mtd_partition *parts;
-	int nb_parts = 0;
-	
-	/* Default flash bankwidth */
-	pb1550_map.bankwidth = flash_bankwidth;
-
-	if (setup_flash_params()) 
-		return -ENXIO;
-
-	/*
-	 * Static partition definition selection
-	 */
-	parts = pb1550_partitions;
-	nb_parts = NB_OF(pb1550_partitions);
-	pb1550_map.size = window_size;
-
-	/*
-	 * Now let's probe for the actual flash.  Do it here since
-	 * specific machine settings might have been set above.
-	 */
-	printk(KERN_NOTICE "Pb1550 flash: probing %d-bit flash bus\n", 
-			pb1550_map.bankwidth*8);
-	pb1550_map.virt = ioremap(window_addr, window_size);
-	mymtd = do_map_probe("cfi_probe", &pb1550_map);
-	if (!mymtd) return -ENXIO;
-	mymtd->owner = THIS_MODULE;
-
-	add_mtd_partitions(mymtd, parts, nb_parts);
-	return 0;
-}
-
-static void __exit pb1550_mtd_cleanup(void)
-{
-	if (mymtd) {
-		del_mtd_partitions(mymtd);
-		map_destroy(mymtd);
-	}
-}
-
-module_init(pb1550_mtd_init);
-module_exit(pb1550_mtd_cleanup);
-
-MODULE_AUTHOR("Embedded Edge, LLC");
-MODULE_DESCRIPTION("Pb1550 mtd map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/pb1xxx-flash.c b/drivers/mtd/maps/pb1xxx-flash.c
deleted file mode 100644
index 06e7315..0000000
--- a/drivers/mtd/maps/pb1xxx-flash.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Flash memory access on Alchemy Pb1xxx boards
- * 
- * (C) 2001 Pete Popov <ppopov@mvista.com>
- * 
- * $Id: pb1xxx-flash.c,v 1.14 2004/11/04 13:24:15 gleixner Exp $
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#ifdef 	DEBUG_RW
-#define	DBG(x...)	printk(x)
-#else
-#define	DBG(x...)	
-#endif
-
-#ifdef CONFIG_MIPS_PB1000
-
-#define WINDOW_ADDR 0x1F800000
-#define WINDOW_SIZE 0x800000
-
-static struct mtd_partition pb1xxx_partitions[] = {
-        {
-                .name         =  "yamon env",
-                .size         =   0x00020000,
-                .offset       =   0,
-                .mask_flags   =   MTD_WRITEABLE},
-	{
-                .name         =   "User FS",
-                .size         =   0x003e0000,
-                .offset       =   0x20000,},
-	{
-                .name         =   "boot code",
-                .size         =   0x100000,
-                .offset       =   0x400000,
-                .mask_flags   =   MTD_WRITEABLE},
-	{
-                .name         =   "raw/kernel",
-                .size         =   0x300000,
-                .offset       =   0x500000}
-};
-
-#elif defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1100)
-
-#if defined(CONFIG_MTD_PB1500_BOOT) && defined(CONFIG_MTD_PB1500_USER)
-/* both 32MB banks will be used. Combine the first 32MB bank and the
- * first 28MB of the second bank together into a single jffs/jffs2
- * partition.
- */
-#define WINDOW_ADDR 0x1C000000
-#define WINDOW_SIZE 0x4000000
-static struct mtd_partition pb1xxx_partitions[] = {
-        {
-                .name         =   "User FS",
-                .size         =   0x3c00000,
-                .offset       =   0x0000000
-        },{
-                .name         =   "yamon",
-                .size         =   0x0100000,
-                .offset       =   0x3c00000,
-                .mask_flags   =   MTD_WRITEABLE
-        },{
-                .name         =   "raw kernel",
-                .size         =   0x02c0000,
-                .offset       =   0x3d00000
-        }
-};
-#elif defined(CONFIG_MTD_PB1500_BOOT) && !defined(CONFIG_MTD_PB1500_USER)
-#define WINDOW_ADDR 0x1E000000
-#define WINDOW_SIZE 0x2000000
-static struct mtd_partition pb1xxx_partitions[] = {
-        {
-                .name         =   "User FS",
-                .size         =   0x1c00000,
-                .offset       =   0x0000000
-        },{
-                .name         =   "yamon",
-                .size         =   0x0100000,
-                .offset       =   0x1c00000,
-                .mask_flags   =   MTD_WRITEABLE
-        },{
-                .name         =   "raw kernel",
-                .size         =   0x02c0000,
-                .offset       =   0x1d00000
-        }
-};
-#elif !defined(CONFIG_MTD_PB1500_BOOT) && defined(CONFIG_MTD_PB1500_USER)
-#define WINDOW_ADDR 0x1C000000
-#define WINDOW_SIZE 0x2000000
-static struct mtd_partition pb1xxx_partitions[] = {
-        {
-                .name         =   "User FS",
-                .size         =    0x1e00000,
-                .offset       =    0x0000000
-        },{
-                .name         =    "raw kernel",
-                .size         =    0x0200000,
-                .offset       =    0x1e00000,
-        }
-};
-#else
-#error MTD_PB1500 define combo error /* should never happen */
-#endif
-#else
-#error Unsupported board
-#endif
-
-#define NAME     	"Pb1x00 Linux Flash"
-#define PADDR    	WINDOW_ADDR
-#define BUSWIDTH	4
-#define SIZE		WINDOW_SIZE
-#define PARTITIONS	4
-
-static struct map_info pb1xxx_mtd_map = {
-	.name		= NAME,
-	.size		= SIZE,
-	.bankwidth	= BUSWIDTH,
-	.phys		= PADDR,
-};
-
-static struct mtd_info *pb1xxx_mtd;
-
-int __init pb1xxx_mtd_init(void)
-{
-	struct mtd_partition *parts;
-	int nb_parts = 0;
-	char *part_type;
-	
-	/*
-	 * Static partition definition selection
-	 */
-	part_type = "static";
-	parts = pb1xxx_partitions;
-	nb_parts = ARRAY_SIZE(pb1xxx_partitions);
-
-	/*
-	 * Now let's probe for the actual flash.  Do it here since
-	 * specific machine settings might have been set above.
-	 */
-	printk(KERN_NOTICE "Pb1xxx flash: probing %d-bit flash bus\n", 
-			BUSWIDTH*8);
-	pb1xxx_mtd_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
-	simple_map_init(&pb1xxx_mtd_map);
-
-	pb1xxx_mtd = do_map_probe("cfi_probe", &pb1xxx_mtd_map);
-	if (!pb1xxx_mtd) return -ENXIO;
-	pb1xxx_mtd->owner = THIS_MODULE;
-
-	add_mtd_partitions(pb1xxx_mtd, parts, nb_parts);
-	return 0;
-}
-
-static void __exit pb1xxx_mtd_cleanup(void)
-{
-	if (pb1xxx_mtd) {
-		del_mtd_partitions(pb1xxx_mtd);
-		map_destroy(pb1xxx_mtd);
-		iounmap((void *) pb1xxx_mtd_map.virt);
-	}
-}
-
-module_init(pb1xxx_mtd_init);
-module_exit(pb1xxx_mtd_cleanup);
-
-MODULE_AUTHOR("Pete Popov");
-MODULE_DESCRIPTION("Pb1xxx CFI map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 08b60bd..18dbd3a 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- *  $Id: pci.c,v 1.9 2004/11/28 09:40:40 dwmw2 Exp $
+ *  $Id: pci.c,v 1.10 2005/03/18 14:04:35 gleixner Exp $
  * 
  * Generic PCI memory map driver.  We support the following boards:
  *  - Intel IQ80310 ATU.
@@ -370,7 +370,7 @@ static struct pci_driver mtd_pci_driver = {
 
 static int __init mtd_pci_maps_init(void)
 {
-	return pci_module_init(&mtd_pci_driver);
+	return pci_register_driver(&mtd_pci_driver);
 }
 
 static void __exit mtd_pci_maps_exit(void)
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
new file mode 100644
index 0000000..118b045
--- /dev/null
+++ b/drivers/mtd/maps/plat-ram.c
@@ -0,0 +1,278 @@
+/* drivers/mtd/maps/plat-ram.c
+ *
+ * (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Generic platfrom device based RAM map
+ *
+ * $Id: plat-ram.c,v 1.3 2005/03/19 22:41:27 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
+
+#include <asm/io.h>
+
+/* private structure for each mtd platform ram device created */
+
+struct platram_info {
+	struct device		*dev;
+	struct mtd_info		*mtd;
+	struct map_info		 map;
+	struct mtd_partition	*partitions;
+	struct resource		*area;
+	struct platdata_mtd_ram	*pdata;
+};
+
+/* to_platram_info()
+ *
+ * device private data to struct platram_info conversion
+*/
+
+static inline struct platram_info *to_platram_info(struct device *dev)
+{
+	return (struct platram_info *)dev_get_drvdata(dev);
+}
+
+/* platram_setrw
+ *
+ * call the platform device's set rw/ro control
+ *
+ * to = 0 => read-only
+ *    = 1 => read-write
+*/
+
+static inline void platram_setrw(struct platram_info *info, int to)
+{
+	if (info->pdata == NULL)
+		return;
+
+	if (info->pdata->set_rw != NULL)
+		(info->pdata->set_rw)(info->dev, to);
+}
+
+/* platram_remove
+ *
+ * called to remove the device from the driver's control
+*/
+
+static int platram_remove(struct device *dev)
+{
+	struct platram_info *info = to_platram_info(dev);
+
+	dev_set_drvdata(dev, NULL);
+
+	dev_dbg(dev, "removing device\n");
+
+	if (info == NULL) 
+		return 0;
+
+	if (info->mtd) {
+#ifdef CONFIG_MTD_PARTITIONS
+		if (info->partitions) {
+			del_mtd_partitions(info->mtd);
+			kfree(info->partitions);
+		}
+#endif
+		del_mtd_device(info->mtd);
+		map_destroy(info->mtd);
+	}
+
+	/* ensure ram is left read-only */
+
+	platram_setrw(info, PLATRAM_RO);
+
+	/* release resources */
+
+	if (info->area) {
+		release_resource(info->area);
+		kfree(info->area);
+	}
+
+	if (info->map.virt != NULL)
+		iounmap(info->map.virt);
+	
+	kfree(info);
+
+	return 0;
+}
+
+/* platram_probe
+ *
+ * called from device drive system when a device matching our
+ * driver is found.
+*/
+
+static int platram_probe(struct device *dev)
+{
+	struct platform_device *pd = to_platform_device(dev);
+	struct platdata_mtd_ram	*pdata;
+	struct platram_info *info;
+	struct resource *res;
+	int err = 0;
+
+	dev_dbg(dev, "probe entered\n");
+	
+	if (dev->platform_data == NULL) {
+		dev_err(dev, "no platform data supplied\n");
+		err = -ENOENT;
+		goto exit_error;
+	}
+
+	pdata = dev->platform_data;
+
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (info == NULL) {
+		dev_err(dev, "no memory for flash info\n");
+		err = -ENOMEM;
+		goto exit_error;
+	}
+
+	memset(info, 0, sizeof(*info));
+	dev_set_drvdata(dev, info);
+
+	info->dev = dev;
+	info->pdata = pdata;
+
+	/* get the resource for the memory mapping */
+
+	res = platform_get_resource(pd, IORESOURCE_MEM, 0);
+
+	if (res == NULL) {
+		dev_err(dev, "no memory resource specified\n");
+		err = -ENOENT;
+		goto exit_free;
+	}
+
+	dev_dbg(dev, "got platform resource %p (0x%lx)\n", res, res->start);
+
+	/* setup map parameters */
+
+	info->map.phys = res->start;
+	info->map.size = (res->end - res->start) + 1;
+	info->map.name = pdata->mapname != NULL ? pdata->mapname : pd->name;
+	info->map.bankwidth = pdata->bankwidth;
+
+	/* register our usage of the memory area */
+
+	info->area = request_mem_region(res->start, info->map.size, pd->name);
+	if (info->area == NULL) {
+		dev_err(dev, "failed to request memory region\n");
+		err = -EIO;
+		goto exit_free;
+	}
+
+	/* remap the memory area */
+
+	info->map.virt = ioremap(res->start, info->map.size);
+	dev_dbg(dev, "virt %p, %lu bytes\n", info->map.virt, info->map.size);
+
+	if (info->map.virt == NULL) {
+		dev_err(dev, "failed to ioremap() region\n");
+		err = -EIO;
+		goto exit_free;
+	}
+
+	simple_map_init(&info->map);
+
+	dev_dbg(dev, "initialised map, probing for mtd\n");
+
+	/* probe for the right mtd map driver */
+
+	info->mtd = do_map_probe("map_ram" , &info->map);
+	if (info->mtd == NULL) {
+		dev_err(dev, "failed to probe for map_ram\n");
+		err = -ENOMEM;
+		goto exit_free;
+	}
+
+	info->mtd->owner = THIS_MODULE;
+
+	platram_setrw(info, PLATRAM_RW);
+
+	/* check to see if there are any available partitions, or wether
+	 * to add this device whole */
+
+#ifdef CONFIG_MTD_PARTITIONS
+	if (pdata->nr_partitions > 0) {
+		const char **probes = { NULL };
+
+		if (pdata->probes)
+			probes = (const char **)pdata->probes;
+
+		err = parse_mtd_partitions(info->mtd, probes,
+					   &info->partitions, 0);
+		if (err > 0) {
+			err = add_mtd_partitions(info->mtd, info->partitions,
+						 err);
+		}
+	}
+#endif /* CONFIG_MTD_PARTITIONS */
+
+	if (add_mtd_device(info->mtd)) {
+		dev_err(dev, "add_mtd_device() failed\n");
+		err = -ENOMEM;
+	}
+	
+	dev_info(dev, "registered mtd device\n");
+	return err;
+
+ exit_free:
+	platram_remove(dev);
+ exit_error:
+	return err;
+}
+
+/* device driver info */
+
+static struct device_driver platram_driver = {
+	.name		= "mtd-ram",
+	.bus		= &platform_bus_type,
+	.probe		= platram_probe,
+	.remove		= platram_remove,
+};
+
+/* module init/exit */
+
+static int __init platram_init(void)
+{
+	printk("Generic platform RAM MTD, (c) 2004 Simtec Electronics\n");
+	return driver_register(&platram_driver);
+}
+
+static void __exit platram_exit(void)
+{
+	driver_unregister(&platram_driver);
+}
+
+module_init(platram_init);
+module_exit(platram_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("MTD platform RAM map driver");
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index 5bb3b60..97a8dfd 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -1,6 +1,6 @@
 /*
  * MTD map driver for BIOS Flash on Intel SCB2 boards
- * $Id: scb2_flash.c,v 1.11 2004/11/28 09:40:40 dwmw2 Exp $
+ * $Id: scb2_flash.c,v 1.12 2005/03/18 14:04:35 gleixner Exp $
  * Copyright (C) 2002 Sun Microsystems, Inc.
  * Tim Hockin <thockin@sun.com>
  *
@@ -238,7 +238,7 @@ static struct pci_driver scb2_flash_driver = {
 static int __init
 scb2_flash_init(void)
 {
-	return pci_module_init(&scb2_flash_driver);
+	return pci_register_driver(&scb2_flash_driver);
 }
 
 static void __exit
diff --git a/drivers/mtd/maps/sharpsl-flash.c b/drivers/mtd/maps/sharpsl-flash.c
index b3b39cb..d15da6f 100644
--- a/drivers/mtd/maps/sharpsl-flash.c
+++ b/drivers/mtd/maps/sharpsl-flash.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2001 Lineo Japan, Inc.
  * Copyright (C) 2002  SHARP
  *
- * $Id: sharpsl-flash.c,v 1.2 2004/11/24 20:38:06 rpurdie Exp $
+ * $Id: sharpsl-flash.c,v 1.5 2005/03/21 08:42:11 rpurdie Exp $
  *
  * based on rpxlite.c,v 1.15 2001/10/02 15:05:14 dwmw2 Exp
  *          Handle mapping of the flash on the RPX Lite and CLLF boards
@@ -24,13 +24,14 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <asm/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
 
 #define WINDOW_ADDR 0x00000000
-#define WINDOW_SIZE 0x01000000
+#define WINDOW_SIZE 0x00800000
 #define BANK_WIDTH 2
 
 static struct mtd_info *mymtd;
@@ -44,9 +45,7 @@ struct map_info sharpsl_map = {
 
 static struct mtd_partition sharpsl_partitions[1] = {
 	{
-		name:		"Filesystem",
-		size:		0x006d0000,
-		offset:		0x00120000
+		name:		"Boot PROM Filesystem",
 	}
 };
 
@@ -58,12 +57,16 @@ int __init init_sharpsl(void)
 	int nb_parts = 0;
 	char *part_type = "static";
 
-	printk(KERN_NOTICE "Sharp SL series flash device: %x at %x\n", WINDOW_SIZE, WINDOW_ADDR);
+	printk(KERN_NOTICE "Sharp SL series flash device: %x at %x\n", 
+		WINDOW_SIZE, WINDOW_ADDR);
 	sharpsl_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
 	if (!sharpsl_map.virt) {
 		printk("Failed to ioremap\n");
 		return -EIO;
 	}
+
+	simple_map_init(&sharpsl_map);
+
 	mymtd = do_map_probe("map_rom", &sharpsl_map);
 	if (!mymtd) {
 		iounmap(sharpsl_map.virt);
@@ -72,6 +75,22 @@ int __init init_sharpsl(void)
 
 	mymtd->owner = THIS_MODULE;
 
+	if (machine_is_corgi() || machine_is_shepherd() || machine_is_husky() 
+		|| machine_is_poodle()) {
+		sharpsl_partitions[0].size=0x006d0000;
+		sharpsl_partitions[0].offset=0x00120000;
+	} else if (machine_is_tosa()) {
+		sharpsl_partitions[0].size=0x006a0000;
+		sharpsl_partitions[0].offset=0x00160000;
+	} else if (machine_is_spitz()) {
+		sharpsl_partitions[0].size=0x006b0000;
+		sharpsl_partitions[0].offset=0x00140000;
+	} else {
+		map_destroy(mymtd);
+		iounmap(sharpsl_map.virt);	
+		return -ENODEV;
+	}
+	
 	parts = sharpsl_partitions;
 	nb_parts = NB_OF(sharpsl_partitions);
 
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 510ad78..1ed602a 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1,5 +1,5 @@
 /*
- * $Id: mtdchar.c,v 1.66 2005/01/05 18:05:11 dwmw2 Exp $
+ * $Id: mtdchar.c,v 1.73 2005/07/04 17:36:41 gleixner Exp $
  *
  * Character-device access to raw MTD devices.
  *
@@ -15,27 +15,30 @@
 #include <linux/fs.h>
 #include <asm/uaccess.h>
 
-#ifdef CONFIG_DEVFS_FS
-#include <linux/devfs_fs_kernel.h>
+#include <linux/device.h>
+
+static struct class *mtd_class;
 
 static void mtd_notify_add(struct mtd_info* mtd)
 {
 	if (!mtd)
 		return;
 
-	devfs_mk_cdev(MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
-		      S_IFCHR | S_IRUGO | S_IWUGO, "mtd/%d", mtd->index);
-		
-	devfs_mk_cdev(MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1),
-		      S_IFCHR | S_IRUGO, "mtd/%dro", mtd->index);
+	class_device_create(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
+			    NULL, "mtd%d", mtd->index);
+	
+	class_device_create(mtd_class, 
+			    MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1),
+			    NULL, "mtd%dro", mtd->index);
 }
 
 static void mtd_notify_remove(struct mtd_info* mtd)
 {
 	if (!mtd)
 		return;
-	devfs_remove("mtd/%d", mtd->index);
-	devfs_remove("mtd/%dro", mtd->index);
+
+	class_device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2));
+	class_device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1));
 }
 
 static struct mtd_notifier notifier = {
@@ -43,25 +46,25 @@ static struct mtd_notifier notifier = {
 	.remove	= mtd_notify_remove,
 };
 
-static inline void mtdchar_devfs_init(void)
-{
-	devfs_mk_dir("mtd");
-	register_mtd_user(&notifier);
-}
+/*
+ * We use file->private_data to store a pointer to the MTDdevice.
+ * Since alighment is at least 32 bits, we have 2 bits free for OTP
+ * modes as well.
+ */
 
-static inline void mtdchar_devfs_exit(void)
-{
-	unregister_mtd_user(&notifier);
-	devfs_remove("mtd");
-}
-#else /* !DEVFS */
-#define mtdchar_devfs_init() do { } while(0)
-#define mtdchar_devfs_exit() do { } while(0)
-#endif
+#define TO_MTD(file) (struct mtd_info *)((long)((file)->private_data) & ~3L)
+
+#define MTD_MODE_OTP_FACT	1
+#define MTD_MODE_OTP_USER	2
+#define MTD_MODE(file)		((long)((file)->private_data) & 3)
+
+#define SET_MTD_MODE(file, mode) \
+	do { long __p = (long)((file)->private_data); \
+	     (file)->private_data = (void *)((__p & ~3L) | mode); } while (0)
 
 static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
 {
-	struct mtd_info *mtd = file->private_data;
+	struct mtd_info *mtd = TO_MTD(file);
 
 	switch (orig) {
 	case 0:
@@ -134,7 +137,7 @@ static int mtd_close(struct inode *inode, struct file *file)
 
 	DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
 
-	mtd = file->private_data;
+	mtd = TO_MTD(file);
 	
 	if (mtd->sync)
 		mtd->sync(mtd);
@@ -151,7 +154,7 @@ static int mtd_close(struct inode *inode, struct file *file)
 
 static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t *ppos)
 {
-	struct mtd_info *mtd = file->private_data;
+	struct mtd_info *mtd = TO_MTD(file);
 	size_t retlen=0;
 	size_t total_retlen=0;
 	int ret=0;
@@ -178,7 +181,16 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
 		if (!kbuf)
 			return -ENOMEM;
 		
-		ret = MTD_READ(mtd, *ppos, len, &retlen, kbuf);
+		switch (MTD_MODE(file)) {
+		case MTD_MODE_OTP_FACT:
+			ret = mtd->read_fact_prot_reg(mtd, *ppos, len, &retlen, kbuf);
+			break;
+		case MTD_MODE_OTP_USER:
+			ret = mtd->read_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
+			break;
+		default:
+			ret = MTD_READ(mtd, *ppos, len, &retlen, kbuf);
+		}
 		/* Nand returns -EBADMSG on ecc errors, but it returns
 		 * the data. For our userspace tools it is important
 		 * to dump areas with ecc errors ! 
@@ -196,6 +208,8 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
 
 			count -= retlen;
 			buf += retlen;
+			if (retlen == 0)
+				count = 0;
 		}
 		else {
 			kfree(kbuf);
@@ -210,7 +224,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
 
 static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count,loff_t *ppos)
 {
-	struct mtd_info *mtd = file->private_data;
+	struct mtd_info *mtd = TO_MTD(file);
 	char *kbuf;
 	size_t retlen;
 	size_t total_retlen=0;
@@ -245,7 +259,20 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count
 			return -EFAULT;
 		}
 		
-	        ret = (*(mtd->write))(mtd, *ppos, len, &retlen, kbuf);
+		switch (MTD_MODE(file)) {
+		case MTD_MODE_OTP_FACT:
+			ret = -EROFS;
+			break;
+		case MTD_MODE_OTP_USER:
+			if (!mtd->write_user_prot_reg) {
+				ret = -EOPNOTSUPP;
+				break;
+			}
+			ret = mtd->write_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
+			break;
+		default:
+			ret = (*(mtd->write))(mtd, *ppos, len, &retlen, kbuf);
+		}
 		if (!ret) {
 			*ppos += retlen;
 			total_retlen += retlen;
@@ -276,7 +303,7 @@ static void mtdchar_erase_callback (struct erase_info *instr)
 static int mtd_ioctl(struct inode *inode, struct file *file,
 		     u_int cmd, u_long arg)
 {
-	struct mtd_info *mtd = file->private_data;
+	struct mtd_info *mtd = TO_MTD(file);
 	void __user *argp = (void __user *)arg;
 	int ret = 0;
 	u_long size;
@@ -518,6 +545,80 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 		break;
 	}
 
+#ifdef CONFIG_MTD_OTP
+	case OTPSELECT:
+	{
+		int mode;
+		if (copy_from_user(&mode, argp, sizeof(int)))
+			return -EFAULT;
+		SET_MTD_MODE(file, 0);
+		switch (mode) {
+		case MTD_OTP_FACTORY:
+			if (!mtd->read_fact_prot_reg)
+				ret = -EOPNOTSUPP;
+			else
+				SET_MTD_MODE(file, MTD_MODE_OTP_FACT);
+			break;
+		case MTD_OTP_USER:
+			if (!mtd->read_fact_prot_reg)
+				ret = -EOPNOTSUPP;
+			else
+				SET_MTD_MODE(file, MTD_MODE_OTP_USER);
+			break;
+		default:
+			ret = -EINVAL;
+		case MTD_OTP_OFF:
+			break;
+		}
+		file->f_pos = 0;
+		break;
+	}
+
+	case OTPGETREGIONCOUNT:
+	case OTPGETREGIONINFO:
+	{
+		struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
+		if (!buf)
+			return -ENOMEM;
+		ret = -EOPNOTSUPP;
+		switch (MTD_MODE(file)) {
+		case MTD_MODE_OTP_FACT:
+			if (mtd->get_fact_prot_info)
+				ret = mtd->get_fact_prot_info(mtd, buf, 4096);
+			break;
+		case MTD_MODE_OTP_USER:
+			if (mtd->get_user_prot_info)
+				ret = mtd->get_user_prot_info(mtd, buf, 4096);
+			break;
+		}
+		if (ret >= 0) {
+			if (cmd == OTPGETREGIONCOUNT) {
+				int nbr = ret / sizeof(struct otp_info);
+				ret = copy_to_user(argp, &nbr, sizeof(int));
+			} else
+				ret = copy_to_user(argp, buf, ret);
+			if (ret)
+				ret = -EFAULT;
+		}
+		kfree(buf);
+		break;
+	}
+
+	case OTPLOCK:
+	{
+		struct otp_info info;
+
+		if (MTD_MODE(file) != MTD_MODE_OTP_USER)
+			return -EINVAL;
+		if (copy_from_user(&info, argp, sizeof(info)))
+			return -EFAULT;
+		if (!mtd->lock_user_prot_reg)
+			return -EOPNOTSUPP;
+		ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
+		break;
+	}
+#endif
+
 	default:
 		ret = -ENOTTY;
 	}
@@ -543,13 +644,22 @@ static int __init init_mtdchar(void)
 		return -EAGAIN;
 	}
 
-	mtdchar_devfs_init();
+	mtd_class = class_create(THIS_MODULE, "mtd");
+
+	if (IS_ERR(mtd_class)) {
+		printk(KERN_ERR "Error creating mtd class.\n");
+		unregister_chrdev(MTD_CHAR_MAJOR, "mtd");
+		return PTR_ERR(mtd_class);
+	}
+
+	register_mtd_user(&notifier);
 	return 0;
 }
 
 static void __exit cleanup_mtdchar(void)
 {
-	mtdchar_devfs_exit();
+	unregister_mtd_user(&notifier);
+	class_destroy(mtd_class);
 	unregister_chrdev(MTD_CHAR_MAJOR, "mtd");
 }
 
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 9c0315d..dc86df1 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1,5 +1,5 @@
 /*
- * $Id: mtdcore.c,v 1.44 2004/11/16 18:28:59 dwmw2 Exp $
+ * $Id: mtdcore.c,v 1.45 2005/02/18 14:34:50 dedekind Exp $
  *
  * Core registration and callback routines for MTD
  * drivers and users.
@@ -149,8 +149,8 @@ void register_mtd_user (struct mtd_notifier *new)
 }
 
 /**
- *	register_mtd_user - unregister a 'user' of MTD devices.
- *	@new: pointer to notifier info structure
+ *	unregister_mtd_user - unregister a 'user' of MTD devices.
+ *	@old: pointer to notifier info structure
  *
  *	Removes a callback function pair from the list of 'users' to be
  *	notified upon addition or removal of MTD devices. Causes the
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 96ebb52..b92e6bff 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -5,7 +5,7 @@
  *
  * This code is GPL
  *
- * $Id: mtdpart.c,v 1.51 2004/11/16 18:28:59 dwmw2 Exp $
+ * $Id: mtdpart.c,v 1.53 2005/02/08 17:11:13 nico Exp $
  *
  * 	02-21-2002	Thomas Gleixner <gleixner@autronix.de>
  *			added support for read_oob, write_oob
@@ -116,6 +116,13 @@ static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t le
 					len, retlen, buf);
 }
 
+static int part_get_user_prot_info (struct mtd_info *mtd,
+				    struct otp_info *buf, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->get_user_prot_info (part->master, buf, len);
+}
+
 static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, 
 			size_t *retlen, u_char *buf)
 {
@@ -124,6 +131,13 @@ static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t le
 					len, retlen, buf);
 }
 
+static int part_get_fact_prot_info (struct mtd_info *mtd,
+				    struct otp_info *buf, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->get_fact_prot_info (part->master, buf, len);
+}
+
 static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
 			size_t *retlen, const u_char *buf)
 {
@@ -182,6 +196,12 @@ static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t l
 					len, retlen, buf);
 }
 
+static int part_lock_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len) 
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->lock_user_prot_reg (part->master, from, len);
+}
+
 static int part_writev (struct mtd_info *mtd,  const struct kvec *vecs,
 			 unsigned long count, loff_t to, size_t *retlen)
 {
@@ -409,6 +429,12 @@ int add_mtd_partitions(struct mtd_info *master,
 			slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
 		if(master->write_user_prot_reg)
 			slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
+		if(master->lock_user_prot_reg)
+			slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
+		if(master->get_user_prot_info)
+			slave->mtd.get_user_prot_info = part_get_user_prot_info;
+		if(master->get_fact_prot_info)
+			slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
 		if (master->sync)
 			slave->mtd.sync = part_sync;
 		if (!i && master->suspend && master->resume) {
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index f7801eb..36d34e5 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,5 +1,5 @@
 # drivers/mtd/nand/Kconfig
-# $Id: Kconfig,v 1.26 2005/01/05 12:42:24 dwmw2 Exp $
+# $Id: Kconfig,v 1.31 2005/06/20 12:03:21 bjd Exp $
 
 menu "NAND Flash Device Drivers"
 	depends on MTD!=n
@@ -58,20 +58,6 @@ config MTD_NAND_TOTO
 config MTD_NAND_IDS
 	tristate
 
-config MTD_NAND_TX4925NDFMC
-	tristate "SmartMedia Card on Toshiba RBTX4925 reference board"
-	depends on TOSHIBA_RBTX4925 && MTD_NAND && TOSHIBA_RBTX4925_MPLEX_NAND
-	help
-	  This enables the driver for the NAND flash device found on the
-	  Toshiba RBTX4925 reference board, which is a SmartMediaCard.
-
-config MTD_NAND_TX4938NDFMC
-	tristate "NAND Flash device on Toshiba RBTX4938 reference board"
-	depends on TOSHIBA_RBTX4938 && MTD_NAND && TOSHIBA_RBTX4938_MPLEX_NAND 
-	help
-	  This enables the driver for the NAND flash device found on the
-	  Toshiba RBTX4938 reference board.
-
 config MTD_NAND_AU1550
 	tristate "Au1550 NAND support"
 	depends on SOC_AU1550 && MTD_NAND
@@ -95,10 +81,11 @@ config MTD_NAND_PPCHAMELEONEVB
 	  This enables the NAND flash driver on the PPChameleon EVB Board.
 
 config MTD_NAND_S3C2410
-	tristate "NAND Flash support for S3C2410 SoC"
+	tristate "NAND Flash support for S3C2410/S3C2440 SoC"
 	depends on ARCH_S3C2410 && MTD_NAND
 	help
-	  This enables the NAND flash controller on the S3C2410.
+	  This enables the NAND flash controller on the S3C2410 and S3C2440
+	  SoCs
 
 	  No board specfic support is done by this driver, each board
 	  must advertise a platform_device for the driver to attach. 
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index d9dc8cc..4174202 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -10,8 +10,6 @@ obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
 obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
 obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
 obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
-obj-$(CONFIG_MTD_NAND_TX4925NDFMC)	+= tx4925ndfmc.o
-obj-$(CONFIG_MTD_NAND_TX4938NDFMC)	+= tx4938ndfmc.o
 obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
 obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB)	+= ppchameleonevb.o
 obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 02135c3..fdb5d4a 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -16,7 +16,7 @@
  *  
  * Interface to generic NAND code for M-Systems DiskOnChip devices
  *
- * $Id: diskonchip.c,v 1.45 2005/01/05 18:05:14 dwmw2 Exp $
+ * $Id: diskonchip.c,v 1.54 2005/04/07 14:22:55 dbrown Exp $
  */
 
 #include <linux/kernel.h>
@@ -35,13 +35,13 @@
 #include <linux/mtd/inftl.h>
 
 /* Where to look for the devices? */
-#ifndef CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS
-#define CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS 0
+#ifndef CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS
+#define CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS 0
 #endif
 
 static unsigned long __initdata doc_locations[] = {
 #if defined (__alpha__) || defined(__i386__) || defined(__x86_64__)
-#ifdef CONFIG_MTD_DISKONCHIP_PROBE_HIGH
+#ifdef CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH
 	0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, 
 	0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000,
 	0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, 
@@ -81,11 +81,6 @@ struct doc_priv {
 	struct mtd_info *nextdoc;
 };
 
-/* Max number of eraseblocks to scan (from start of device) for the (I)NFTL
-   MediaHeader.  The spec says to just keep going, I think, but that's just
-   silly. */
-#define MAX_MEDIAHEADER_SCAN 8
-
 /* This is the syndrome computed by the HW ecc generator upon reading an empty
    page, one with all 0xff for data and stored ecc code. */
 static u_char empty_read_syndrome[6] = { 0x26, 0xff, 0x6d, 0x47, 0x73, 0x7a };
@@ -111,10 +106,11 @@ module_param(try_dword, int, 0);
 static int no_ecc_failures=0;
 module_param(no_ecc_failures, int, 0);
 
-#ifdef CONFIG_MTD_PARTITIONS
 static int no_autopart=0;
 module_param(no_autopart, int, 0);
-#endif
+
+static int show_firmware_partition=0;
+module_param(show_firmware_partition, int, 0);
 
 #ifdef MTD_NAND_DISKONCHIP_BBTWRITE
 static int inftl_bbt_write=1;
@@ -123,7 +119,7 @@ static int inftl_bbt_write=0;
 #endif
 module_param(inftl_bbt_write, int, 0);
 
-static unsigned long doc_config_location = CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS;
+static unsigned long doc_config_location = CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS;
 module_param(doc_config_location, ulong, 0);
 MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip");
 
@@ -410,7 +406,12 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
 	doc200x_hwcontrol(mtd, NAND_CTL_SETALE);
 	this->write_byte(mtd, 0);
 	doc200x_hwcontrol(mtd, NAND_CTL_CLRALE);
-
+	
+	/* We cant' use dev_ready here, but at least we wait for the
+	 * command to complete 
+	 */
+	udelay(50);
+	
 	ret = this->read_byte(mtd) << 8;
 	ret |= this->read_byte(mtd);
 
@@ -429,6 +430,8 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
 		doc2000_write_byte(mtd, 0);
 		doc200x_hwcontrol(mtd, NAND_CTL_CLRALE);
 
+		udelay(50);
+
 		ident.dword = readl(docptr + DoC_2k_CDSN_IO);
 		if (((ident.byte[0] << 8) | ident.byte[1]) == ret) {
 			printk(KERN_INFO "DiskOnChip 2000 responds to DWORD access\n");
@@ -1046,11 +1049,21 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_
 		
 //u_char mydatabuf[528];
 
+/* The strange out-of-order .oobfree list below is a (possibly unneeded)
+ * attempt to retain compatibility.  It used to read:
+ * 	.oobfree = { {8, 8} }
+ * Since that leaves two bytes unusable, it was changed.  But the following
+ * scheme might affect existing jffs2 installs by moving the cleanmarker:
+ * 	.oobfree = { {6, 10} }
+ * jffs2 seems to handle the above gracefully, but the current scheme seems
+ * safer.  The only problem with it is that any code that parses oobfree must
+ * be able to handle out-of-order segments.
+ */
 static struct nand_oobinfo doc200x_oobinfo = {
         .useecc = MTD_NANDECC_AUTOPLACE,
         .eccbytes = 6,
         .eccpos = {0, 1, 2, 3, 4, 5},
-        .oobfree = { {8, 8} }
+        .oobfree = { {8, 8}, {6, 2} }
 };
  
 /* Find the (I)NFTL Media Header, and optionally also the mirror media header.
@@ -1064,12 +1077,11 @@ static int __init find_media_headers(struct mtd_info *mtd, u_char *buf,
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-	unsigned offs, end = (MAX_MEDIAHEADER_SCAN << this->phys_erase_shift);
+	unsigned offs;
 	int ret;
 	size_t retlen;
 
-	end = min(end, mtd->size); // paranoia
-	for (offs = 0; offs < end; offs += mtd->erasesize) {
+	for (offs = 0; offs < mtd->size; offs += mtd->erasesize) {
 		ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf);
 		if (retlen != mtd->oobblock) continue;
 		if (ret) {
@@ -1111,6 +1123,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd,
 	u_char *buf;
 	struct NFTLMediaHeader *mh;
 	const unsigned psize = 1 << this->page_shift;
+	int numparts = 0;
 	unsigned blocks, maxblocks;
 	int offs, numheaders;
 
@@ -1122,8 +1135,10 @@ static inline int __init nftl_partscan(struct mtd_info *mtd,
 	if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out;
 	mh = (struct NFTLMediaHeader *) buf;
 
-//#ifdef CONFIG_MTD_DEBUG_VERBOSE
-//	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+	mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits);
+	mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN);
+	mh->FormattedSize = le32_to_cpu(mh->FormattedSize);
+
 	printk(KERN_INFO "    DataOrgID        = %s\n"
 			 "    NumEraseUnits    = %d\n"
 			 "    FirstPhysicalEUN = %d\n"
@@ -1132,7 +1147,6 @@ static inline int __init nftl_partscan(struct mtd_info *mtd,
 		mh->DataOrgID, mh->NumEraseUnits,
 		mh->FirstPhysicalEUN, mh->FormattedSize,
 		mh->UnitSizeFactor);
-//#endif
 
 	blocks = mtd->size >> this->phys_erase_shift;
 	maxblocks = min(32768U, mtd->erasesize - psize);
@@ -1175,23 +1189,28 @@ static inline int __init nftl_partscan(struct mtd_info *mtd,
 	offs <<= this->page_shift;
 	offs += mtd->erasesize;
 
-	//parts[0].name = " DiskOnChip Boot / Media Header partition";
-	//parts[0].offset = 0;
-	//parts[0].size = offs;
+	if (show_firmware_partition == 1) {
+		parts[0].name = " DiskOnChip Firmware / Media Header partition";
+		parts[0].offset = 0;
+		parts[0].size = offs;
+		numparts = 1;
+	}
 
-	parts[0].name = " DiskOnChip BDTL partition";
-	parts[0].offset = offs;
-	parts[0].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift;
+	parts[numparts].name = " DiskOnChip BDTL partition";
+	parts[numparts].offset = offs;
+	parts[numparts].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift;
+
+	offs += parts[numparts].size;
+	numparts++;
 
-	offs += parts[0].size;
 	if (offs < mtd->size) {
-		parts[1].name = " DiskOnChip Remainder partition";
-		parts[1].offset = offs;
-		parts[1].size = mtd->size - offs;
-		ret = 2;
-		goto out;
+		parts[numparts].name = " DiskOnChip Remainder partition";
+		parts[numparts].offset = offs;
+		parts[numparts].size = mtd->size - offs;
+		numparts++;
 	}
-	ret = 1;
+
+	ret = numparts;
 out:
 	kfree(buf);
 	return ret;
@@ -1233,8 +1252,6 @@ static inline int __init inftl_partscan(struct mtd_info *mtd,
 	mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
 	mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
  
-//#ifdef CONFIG_MTD_DEBUG_VERBOSE
-//	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
 	printk(KERN_INFO "    bootRecordID          = %s\n"
 			 "    NoOfBootImageBlocks   = %d\n"
 			 "    NoOfBinaryPartitions  = %d\n"
@@ -1252,7 +1269,6 @@ static inline int __init inftl_partscan(struct mtd_info *mtd,
 		((unsigned char *) &mh->OsakVersion)[2] & 0xf,
 		((unsigned char *) &mh->OsakVersion)[3] & 0xf,
 		mh->PercentUsed);
-//#endif
 
 	vshift = this->phys_erase_shift + mh->BlockMultiplierBits;
 
@@ -1278,8 +1294,6 @@ static inline int __init inftl_partscan(struct mtd_info *mtd,
 		ip->spareUnits = le32_to_cpu(ip->spareUnits);
 		ip->Reserved0 = le32_to_cpu(ip->Reserved0);
 
-//#ifdef CONFIG_MTD_DEBUG_VERBOSE
-//		if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
 		printk(KERN_INFO	"    PARTITION[%d] ->\n"
 			"        virtualUnits    = %d\n"
 			"        firstUnit       = %d\n"
@@ -1289,16 +1303,14 @@ static inline int __init inftl_partscan(struct mtd_info *mtd,
 			i, ip->virtualUnits, ip->firstUnit,
 			ip->lastUnit, ip->flags,
 			ip->spareUnits);
-//#endif
 
-/*
-		if ((i == 0) && (ip->firstUnit > 0)) {
+		if ((show_firmware_partition == 1) &&
+		    (i == 0) && (ip->firstUnit > 0)) {
 			parts[0].name = " DiskOnChip IPL / Media Header partition";
 			parts[0].offset = 0;
 			parts[0].size = mtd->erasesize * ip->firstUnit;
 			numparts = 1;
 		}
-*/
 
 		if (ip->flags & INFTL_BINARY)
 			parts[numparts].name = " DiskOnChip BDK partition";
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 44d5b12..1bd71a5 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -28,6 +28,24 @@
  *		among multiple independend devices. Suggestions and initial patch
  *		from Ben Dooks <ben-mtd@fluff.org>
  *
+ *  12-05-2004	dmarlin: add workaround for Renesas AG-AND chips "disturb" issue.
+ *		Basically, any block not rewritten may lose data when surrounding blocks
+ *		are rewritten many times.  JFFS2 ensures this doesn't happen for blocks 
+ *		it uses, but the Bad Block Table(s) may not be rewritten.  To ensure they
+ *		do not lose data, force them to be rewritten when some of the surrounding
+ *		blocks are erased.  Rather than tracking a specific nearby block (which 
+ *		could itself go bad), use a page address 'mask' to select several blocks 
+ *		in the same area, and rewrite the BBT when any of them are erased.
+ *
+ *  01-03-2005	dmarlin: added support for the device recovery command sequence for Renesas 
+ *		AG-AND chips.  If there was a sudden loss of power during an erase operation,
+ * 		a "device recovery" operation must be performed when power is restored
+ * 		to ensure correct operation.
+ *
+ *  01-20-2005	dmarlin: added support for optional hardware specific callback routine to 
+ *		perform extra error status checks on erase and write failures.  This required
+ *		adding a wrapper function for nand_read_ecc.
+ *
  * Credits:
  *	David Woodhouse for adding multichip support  
  *	
@@ -41,7 +59,7 @@
  *	The AG-AND chips have nice features for speed improvement,
  *	which are not supported yet. Read / program 4 pages in one go.
  *
- * $Id: nand_base.c,v 1.126 2004/12/13 11:22:25 lavinen Exp $
+ * $Id: nand_base.c,v 1.146 2005/06/17 15:02:06 gleixner Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -149,17 +167,21 @@ static void nand_release_device (struct mtd_info *mtd)
 
 	/* De-select the NAND device */
 	this->select_chip(mtd, -1);
-	/* Do we have a hardware controller ? */
+
 	if (this->controller) {
+		/* Release the controller and the chip */
 		spin_lock(&this->controller->lock);
 		this->controller->active = NULL;
+		this->state = FL_READY;
+		wake_up(&this->controller->wq);
 		spin_unlock(&this->controller->lock);
+	} else {
+		/* Release the chip */
+		spin_lock(&this->chip_lock);
+		this->state = FL_READY;
+		wake_up(&this->wq);
+		spin_unlock(&this->chip_lock);
 	}
-	/* Release the chip */
-	spin_lock (&this->chip_lock);
-	this->state = FL_READY;
-	wake_up (&this->wq);
-	spin_unlock (&this->chip_lock);
 }
 
 /**
@@ -443,7 +465,8 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	
 	/* Get block number */
 	block = ((int) ofs) >> this->bbt_erase_shift;
-	this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+	if (this->bbt)
+		this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
 
 	/* Do we have a flash based bad block table ? */
 	if (this->options & NAND_USE_FLASH_BBT)
@@ -466,7 +489,7 @@ static int nand_check_wp (struct mtd_info *mtd)
 	struct nand_chip *this = mtd->priv;
 	/* Check the WP bit */
 	this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
-	return (this->read_byte(mtd) & 0x80) ? 0 : 1; 
+	return (this->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; 
 }
 
 /**
@@ -490,6 +513,22 @@ static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, i
 	return nand_isbad_bbt (mtd, ofs, allowbbt);
 }
 
+/* 
+ * Wait for the ready pin, after a command
+ * The timeout is catched later.
+ */
+static void nand_wait_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long	timeo = jiffies + 2;
+
+	/* wait until command is processed or timeout occures */
+	do {
+		if (this->dev_ready(mtd))
+			return;
+	} while (time_before(jiffies, timeo));	
+}
+
 /**
  * nand_command - [DEFAULT] Send command to NAND device
  * @mtd:	MTD device structure
@@ -571,7 +610,7 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in
 		this->hwcontrol(mtd, NAND_CTL_SETCLE);
 		this->write_byte(mtd, NAND_CMD_STATUS);
 		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-		while ( !(this->read_byte(mtd) & 0x40));
+		while ( !(this->read_byte(mtd) & NAND_STATUS_READY));
 		return;
 
 	/* This applies to read commands */	
@@ -585,12 +624,11 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in
 			return;
 		}	
 	}
-	
 	/* Apply this short delay always to ensure that we do wait tWB in
 	 * any case on any machine. */
 	ndelay (100);
-	/* wait until command is processed */
-	while (!this->dev_ready(mtd));
+
+	nand_wait_ready(mtd);
 }
 
 /**
@@ -619,7 +657,7 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
 	/* Begin command latch cycle */
 	this->hwcontrol(mtd, NAND_CTL_SETCLE);
 	/* Write out the command to the device. */
-	this->write_byte(mtd, command);
+	this->write_byte(mtd, (command & 0xff));
 	/* End command latch cycle */
 	this->hwcontrol(mtd, NAND_CTL_CLRCLE);
 
@@ -647,8 +685,8 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
 	
 	/* 
 	 * program and erase have their own busy handlers 
-	 * status and sequential in needs no delay
-	*/
+	 * status, sequential in, and deplete1 need no delay
+	 */
 	switch (command) {
 			
 	case NAND_CMD_CACHEDPROG:
@@ -657,8 +695,19 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
 	case NAND_CMD_ERASE2:
 	case NAND_CMD_SEQIN:
 	case NAND_CMD_STATUS:
+	case NAND_CMD_DEPLETE1:
 		return;
 
+	/* 
+	 * read error status commands require only a short delay
+	 */
+	case NAND_CMD_STATUS_ERROR:
+	case NAND_CMD_STATUS_ERROR0:
+	case NAND_CMD_STATUS_ERROR1:
+	case NAND_CMD_STATUS_ERROR2:
+	case NAND_CMD_STATUS_ERROR3:
+		udelay(this->chip_delay);
+		return;
 
 	case NAND_CMD_RESET:
 		if (this->dev_ready)	
@@ -667,7 +716,7 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
 		this->hwcontrol(mtd, NAND_CTL_SETCLE);
 		this->write_byte(mtd, NAND_CMD_STATUS);
 		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-		while ( !(this->read_byte(mtd) & 0x40));
+		while ( !(this->read_byte(mtd) & NAND_STATUS_READY));
 		return;
 
 	case NAND_CMD_READ0:
@@ -690,12 +739,12 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
 			return;
 		}	
 	}
-	
+
 	/* Apply this short delay always to ensure that we do wait tWB in
 	 * any case on any machine. */
 	ndelay (100);
-	/* wait until command is processed */
-	while (!this->dev_ready(mtd));
+
+	nand_wait_ready(mtd);
 }
 
 /**
@@ -708,37 +757,34 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
  */
 static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state)
 {
-	struct nand_chip *active = this;
-
+	struct nand_chip *active;
+	spinlock_t *lock;
+	wait_queue_head_t *wq;
 	DECLARE_WAITQUEUE (wait, current);
 
-	/* 
-	 * Grab the lock and see if the device is available 
-	*/
+	lock = (this->controller) ? &this->controller->lock : &this->chip_lock;
+	wq = (this->controller) ? &this->controller->wq : &this->wq;
 retry:
+	active = this;
+	spin_lock(lock);
+
 	/* Hardware controller shared among independend devices */
 	if (this->controller) {
-		spin_lock (&this->controller->lock);
 		if (this->controller->active)
 			active = this->controller->active;
 		else
 			this->controller->active = this;
-		spin_unlock (&this->controller->lock);
 	}
-	
-	if (active == this) {
-		spin_lock (&this->chip_lock);
-		if (this->state == FL_READY) {
-			this->state = new_state;
-			spin_unlock (&this->chip_lock);
-			return;
-		}
-	}	
-	set_current_state (TASK_UNINTERRUPTIBLE);
-	add_wait_queue (&active->wq, &wait);
-	spin_unlock (&active->chip_lock);
-	schedule ();
-	remove_wait_queue (&active->wq, &wait);
+	if (active == this && this->state == FL_READY) {
+		this->state = new_state;
+		spin_unlock(lock);
+		return;
+	}
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	add_wait_queue(wq, &wait);
+	spin_unlock(lock);
+	schedule();
+	remove_wait_queue(wq, &wait);
 	goto retry;
 }
 
@@ -785,7 +831,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
 			if (this->read_byte(mtd) & NAND_STATUS_READY)
 				break;
 		}
-		yield ();
+		cond_resched();
 	}
 	status = (int) this->read_byte(mtd);
 	return status;
@@ -871,8 +917,14 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
 	if (!cached) {
 		/* call wait ready function */
 		status = this->waitfunc (mtd, this, FL_WRITING);
+
+		/* See if operation failed and additional status checks are available */
+		if ((status & NAND_STATUS_FAIL) && (this->errstat)) {
+			status = this->errstat(mtd, this, FL_WRITING, status, page);
+		}
+
 		/* See if device thinks it succeeded */
-		if (status & 0x01) {
+		if (status & NAND_STATUS_FAIL) {
 			DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
 			return -EIO;
 		}
@@ -975,7 +1027,7 @@ static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int
 		if (!this->dev_ready) 
 			udelay (this->chip_delay);
 		else
-			while (!this->dev_ready(mtd));	
+			nand_wait_ready(mtd);
 
 		/* All done, return happy */
 		if (!numpages)
@@ -997,23 +1049,24 @@ out:
 #endif
 
 /**
- * nand_read - [MTD Interface] MTD compability function for nand_read_ecc
+ * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc
  * @mtd:	MTD device structure
  * @from:	offset to read from
  * @len:	number of bytes to read
  * @retlen:	pointer to variable to store the number of read bytes
  * @buf:	the databuffer to put data
  *
- * This function simply calls nand_read_ecc with oob buffer and oobsel = NULL
-*/
+ * This function simply calls nand_do_read_ecc with oob buffer and oobsel = NULL
+ * and flags = 0xff
+ */
 static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
 {
-	return nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
-}			   
+	return nand_do_read_ecc (mtd, from, len, retlen, buf, NULL, &mtd->oobinfo, 0xff);
+}
 
 
 /**
- * nand_read_ecc - [MTD Interface] Read data with ECC
+ * nand_read_ecc - [MTD Interface] MTD compability function for nand_do_read_ecc
  * @mtd:	MTD device structure
  * @from:	offset to read from
  * @len:	number of bytes to read
@@ -1022,11 +1075,39 @@ static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * re
  * @oob_buf:	filesystem supplied oob data buffer
  * @oobsel:	oob selection structure
  *
- * NAND read with ECC
+ * This function simply calls nand_do_read_ecc with flags = 0xff
  */
 static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 			  size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
 {
+	/* use userspace supplied oobinfo, if zero */
+	if (oobsel == NULL)
+		oobsel = &mtd->oobinfo;
+	return nand_do_read_ecc(mtd, from, len, retlen, buf, oob_buf, oobsel, 0xff);
+}
+
+
+/**
+ * nand_do_read_ecc - [MTD Interface] Read data with ECC
+ * @mtd:	MTD device structure
+ * @from:	offset to read from
+ * @len:	number of bytes to read
+ * @retlen:	pointer to variable to store the number of read bytes
+ * @buf:	the databuffer to put data
+ * @oob_buf:	filesystem supplied oob data buffer (can be NULL)
+ * @oobsel:	oob selection structure
+ * @flags:	flag to indicate if nand_get_device/nand_release_device should be preformed
+ *		and how many corrected error bits are acceptable:
+ *		  bits 0..7 - number of tolerable errors
+ *		  bit  8    - 0 == do not get/release chip, 1 == get/release chip
+ *
+ * NAND read with ECC
+ */
+int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
+			     size_t * retlen, u_char * buf, u_char * oob_buf, 
+			     struct nand_oobinfo *oobsel, int flags)
+{
+
 	int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1;
 	int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0;
 	struct nand_chip *this = mtd->priv;
@@ -1051,12 +1132,9 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 	}
 
 	/* Grab the lock and see if the device is available */
-	nand_get_device (this, mtd ,FL_READING);
+	if (flags & NAND_GET_DEVICE)
+		nand_get_device (this, mtd, FL_READING);
 
-	/* use userspace supplied oobinfo, if zero */
-	if (oobsel == NULL)
-		oobsel = &mtd->oobinfo;
-	
 	/* Autoplace of oob data ? Use the default placement scheme */
 	if (oobsel->useecc == MTD_NANDECC_AUTOPLACE)
 		oobsel = this->autooob;
@@ -1118,7 +1196,8 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 		}	
 
 		/* get oob area, if we have no oob buffer from fs-driver */
-		if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE)
+		if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE ||
+			oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
 			oob_data = &this->data_buf[end];
 
 		eccsteps = this->eccsteps;
@@ -1155,7 +1234,8 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 					/* We calc error correction directly, it checks the hw
 					 * generator for an error, reads back the syndrome and
 					 * does the error correction on the fly */
-					if (this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]) == -1) {
+					ecc_status = this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]);
+					if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) {
 						DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " 
 							"Failed ECC read, page 0x%08x on chip %d\n", page, chipnr);
 						ecc_failed++;
@@ -1194,7 +1274,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 				p[i] = ecc_status;
 			}
 			
-			if (ecc_status == -1) {	
+			if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) {	
 				DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page);
 				ecc_failed++;
 			}
@@ -1206,14 +1286,14 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 			/* without autoplace. Legacy mode used by YAFFS1 */
 			switch(oobsel->useecc) {
 			case MTD_NANDECC_AUTOPLACE:
+			case MTD_NANDECC_AUTOPL_USR:
 				/* Walk through the autoplace chunks */
-				for (i = 0, j = 0; j < mtd->oobavail; i++) {
+				for (i = 0; oobsel->oobfree[i][1]; i++) {
 					int from = oobsel->oobfree[i][0];
 					int num = oobsel->oobfree[i][1];
 					memcpy(&oob_buf[oob], &oob_data[from], num);
-					j+= num;
+					oob += num;
 				}
-				oob += mtd->oobavail;
 				break;
 			case MTD_NANDECC_PLACE:
 				/* YAFFS1 legacy mode */
@@ -1239,7 +1319,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 		if (!this->dev_ready) 
 			udelay (this->chip_delay);
 		else
-			while (!this->dev_ready(mtd));	
+			nand_wait_ready(mtd);
 			
 		if (read == len)
 			break;	
@@ -1264,7 +1344,8 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 	}
 
 	/* Deselect and wake up anyone waiting on the device */
-	nand_release_device(mtd);
+	if (flags & NAND_GET_DEVICE)
+		nand_release_device(mtd);
 
 	/*
 	 * Return success, if no ECC failures, else -EBADMSG
@@ -1337,7 +1418,7 @@ static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t
 		if (!this->dev_ready) 
 			udelay (this->chip_delay);
 		else
-			while (!this->dev_ready(mtd));	
+			nand_wait_ready(mtd);
 
 		/* Read more ? */
 		if (i < len) {
@@ -1417,7 +1498,7 @@ int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len,
 		if (!this->dev_ready) 
 			udelay (this->chip_delay);
 		else
-			while (!this->dev_ready(mtd));	
+			nand_wait_ready(mtd);
 			
 		/* Check, if the chip supports auto page increment */ 
 		if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
@@ -1567,6 +1648,8 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
 		oobsel = this->autooob;
 		autoplace = 1;
 	}	
+	if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
+		autoplace = 1;
 
 	/* Setup variables and oob buffer */
 	totalpages = len >> this->page_shift;
@@ -1733,7 +1816,7 @@ static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t *
 	status = this->waitfunc (mtd, this, FL_WRITING);
 
 	/* See if device thinks it succeeded */
-	if (status & 0x01) {
+	if (status & NAND_STATUS_FAIL) {
 		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
 		ret = -EIO;
 		goto out;
@@ -1841,6 +1924,8 @@ static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsig
 		oobsel = this->autooob;
 		autoplace = 1;
 	}	
+	if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
+		autoplace = 1;
 
 	/* Setup start page */
 	page = (int) (to >> this->page_shift);
@@ -1987,6 +2072,7 @@ static int nand_erase (struct mtd_info *mtd, struct erase_info *instr)
 	return nand_erase_nand (mtd, instr, 0);
 }
  
+#define BBT_PAGE_MASK	0xffffff3f
 /**
  * nand_erase_intern - [NAND Interface] erase block(s)
  * @mtd:	MTD device structure
@@ -1999,6 +2085,10 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb
 {
 	int page, len, status, pages_per_block, ret, chipnr;
 	struct nand_chip *this = mtd->priv;
+	int rewrite_bbt[NAND_MAX_CHIPS]={0};	/* flags to indicate the page, if bbt needs to be rewritten. */
+	unsigned int bbt_masked_page;		/* bbt mask to compare to page being erased. */
+						/* It is used to see if the current page is in the same */
+						/*   256 block group and the same bank as the bbt. */
 
 	DEBUG (MTD_DEBUG_LEVEL3,
 	       "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
@@ -2044,6 +2134,13 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb
 		goto erase_exit;
 	}
 
+	/* if BBT requires refresh, set the BBT page mask to see if the BBT should be rewritten */
+	if (this->options & BBT_AUTO_REFRESH) {
+		bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
+	} else {
+		bbt_masked_page = 0xffffffff;	/* should not match anything */
+	}
+
 	/* Loop through the pages */
 	len = instr->len;
 
@@ -2066,13 +2163,26 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb
 		
 		status = this->waitfunc (mtd, this, FL_ERASING);
 
+		/* See if operation failed and additional status checks are available */
+		if ((status & NAND_STATUS_FAIL) && (this->errstat)) {
+			status = this->errstat(mtd, this, FL_ERASING, status, page);
+		}
+
 		/* See if block erase succeeded */
-		if (status & 0x01) {
+		if (status & NAND_STATUS_FAIL) {
 			DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
 			instr->state = MTD_ERASE_FAILED;
 			instr->fail_addr = (page << this->page_shift);
 			goto erase_exit;
 		}
+
+		/* if BBT requires refresh, set the BBT rewrite flag to the page being erased */
+		if (this->options & BBT_AUTO_REFRESH) {
+			if (((page & BBT_PAGE_MASK) == bbt_masked_page) && 
+			     (page != this->bbt_td->pages[chipnr])) {
+				rewrite_bbt[chipnr] = (page << this->page_shift);
+			}
+		}
 		
 		/* Increment page address and decrement length */
 		len -= (1 << this->phys_erase_shift);
@@ -2083,6 +2193,13 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb
 			chipnr++;
 			this->select_chip(mtd, -1);
 			this->select_chip(mtd, chipnr);
+
+			/* if BBT requires refresh and BBT-PERCHIP, 
+			 *   set the BBT page mask to see if this BBT should be rewritten */
+			if ((this->options & BBT_AUTO_REFRESH) && (this->bbt_td->options & NAND_BBT_PERCHIP)) {
+				bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
+			}
+
 		}
 	}
 	instr->state = MTD_ERASE_DONE;
@@ -2097,6 +2214,18 @@ erase_exit:
 	/* Deselect and wake up anyone waiting on the device */
 	nand_release_device(mtd);
 
+	/* if BBT requires refresh and erase was successful, rewrite any selected bad block tables */
+	if ((this->options & BBT_AUTO_REFRESH) && (!ret)) {
+		for (chipnr = 0; chipnr < this->numchips; chipnr++) {
+			if (rewrite_bbt[chipnr]) {
+				/* update the BBT for chip */
+				DEBUG (MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt (%d:0x%0x 0x%0x)\n", 
+					chipnr, rewrite_bbt[chipnr], this->bbt_td->pages[chipnr]);
+				nand_update_bbt (mtd, rewrite_bbt[chipnr]);
+			}
+		}
+	}
+
 	/* Return more or less happy */
 	return ret;
 }
@@ -2168,7 +2297,7 @@ static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
  */
 int nand_scan (struct mtd_info *mtd, int maxchips)
 {
-	int i, j, nand_maf_id, nand_dev_id, busw;
+	int i, nand_maf_id, nand_dev_id, busw, maf_id;
 	struct nand_chip *this = mtd->priv;
 
 	/* Get buswidth to select the correct functions*/
@@ -2256,12 +2385,18 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 			busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
 		}
 
+		/* Try to identify manufacturer */
+		for (maf_id = 0; nand_manuf_ids[maf_id].id != 0x0; maf_id++) {
+			if (nand_manuf_ids[maf_id].id == nand_maf_id)
+				break;
+		}
+
 		/* Check, if buswidth is correct. Hardware drivers should set
 		 * this correct ! */
 		if (busw != (this->options & NAND_BUSWIDTH_16)) {
 			printk (KERN_INFO "NAND device: Manufacturer ID:"
 				" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, 
-				nand_manuf_ids[i].name , mtd->name);
+				nand_manuf_ids[maf_id].name , mtd->name);
 			printk (KERN_WARNING 
 				"NAND bus width %d instead %d bit\n", 
 					(this->options & NAND_BUSWIDTH_16) ? 16 : 8,
@@ -2300,14 +2435,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 		if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
 			this->cmdfunc = nand_command_lp;
 				
-		/* Try to identify manufacturer */
-		for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
-			if (nand_manuf_ids[j].id == nand_maf_id)
-				break;
-		}
 		printk (KERN_INFO "NAND device: Manufacturer ID:"
 			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, 
-			nand_manuf_ids[j].name , nand_flash_ids[i].name);
+			nand_manuf_ids[maf_id].name , nand_flash_ids[i].name);
 		break;
 	}
 
@@ -2388,12 +2518,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 	
 	/* The number of bytes available for the filesystem to place fs dependend
 	 * oob data */
-	if (this->options & NAND_BUSWIDTH_16) {
-		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
-		if (this->autooob->eccbytes & 0x01)
-			mtd->oobavail--;
-	} else
-		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
+	mtd->oobavail = 0;
+	for (i = 0; this->autooob->oobfree[i][1]; i++)
+		mtd->oobavail += this->autooob->oobfree[i][1];
 
 	/* 
 	 * check ECC mode, default to software
@@ -2524,6 +2651,10 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 	memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
 
 	mtd->owner = THIS_MODULE;
+	
+	/* Check, if we should skip the bad block table scan */
+	if (this->options & NAND_SKIP_BBTSCAN)
+		return 0;
 
 	/* Build bad block table */
 	return this->scan_bbt (mtd);
@@ -2555,8 +2686,8 @@ void nand_release (struct mtd_info *mtd)
 		kfree (this->data_buf);
 }
 
-EXPORT_SYMBOL (nand_scan);
-EXPORT_SYMBOL (nand_release);
+EXPORT_SYMBOL_GPL (nand_scan);
+EXPORT_SYMBOL_GPL (nand_release);
 
 MODULE_LICENSE ("GPL");
 MODULE_AUTHOR ("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 9a19497..5ac2d29 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -6,7 +6,7 @@
  *   
  *  Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_bbt.c,v 1.28 2004/11/13 10:19:09 gleixner Exp $
+ * $Id: nand_bbt.c,v 1.33 2005/06/14 15:47:56 gleixner Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -77,7 +77,7 @@
 */
 static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
 {
-	int i, end;
+	int i, end = 0;
 	uint8_t *p = buf;
 
 	end = paglen + td->offs;
@@ -95,9 +95,9 @@ static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_des
 			return -1;
 	}
 
-	p += td->len;
-	end += td->len;
 	if (td->options & NAND_BBT_SCANEMPTY) {
+		p += td->len;
+		end += td->len;
 		for (i = end; i < len; i++) {
 			if (*p++ != 0xff)
 				return -1;
@@ -106,6 +106,32 @@ static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_des
 	return 0;
 }
 
+/** 
+ * check_short_pattern - [GENERIC] check if a pattern is in the buffer
+ * @buf:	the buffer to search
+ * @len:	the length of buffer to search
+ * @paglen:	the pagelength
+ * @td:		search pattern descriptor
+ *
+ * Check for a pattern at the given place. Used to search bad block
+ * tables and good / bad block identifiers. Same as check_pattern, but 
+ * no optional empty check and the pattern is expected to start
+ * at offset 0.
+ *
+*/
+static int check_short_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
+{
+	int i;
+	uint8_t *p = buf;
+
+	/* Compare the pattern */
+	for (i = 0; i < td->len; i++) {
+		if (p[i] != td->pattern[i])
+			return -1;
+	}
+	return 0;
+}
+
 /**
  * read_bbt - [GENERIC] Read the bad block table starting from page
  * @mtd:	MTD device structure
@@ -252,7 +278,7 @@ static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_de
  * Create a bad block table by scanning the device
  * for the given good/bad block identify pattern
  */
-static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip)
+static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip)
 {
 	struct nand_chip *this = mtd->priv;
 	int i, j, numblocks, len, scanlen;
@@ -270,9 +296,17 @@ static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
 		else	
 			len = 1;
 	}
-	scanlen	= mtd->oobblock + mtd->oobsize;
-	readlen = len * mtd->oobblock;
-	ooblen = len * mtd->oobsize;
+
+	if (!(bd->options & NAND_BBT_SCANEMPTY)) {
+		/* We need only read few bytes from the OOB area */
+		scanlen = ooblen = 0;
+		readlen = bd->len;
+	} else {
+		/* Full page content should be read */
+		scanlen	= mtd->oobblock + mtd->oobsize;
+		readlen = len * mtd->oobblock;
+		ooblen = len * mtd->oobsize;
+	}
 
 	if (chip == -1) {
 		/* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it
@@ -284,7 +318,7 @@ static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
 		if (chip >= this->numchips) {
 			printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
 				chip + 1, this->numchips);
-			return;	
+			return -EINVAL;
 		}
 		numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
 		startblock = chip * numblocks;
@@ -293,18 +327,41 @@ static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
 	}
 	
 	for (i = startblock; i < numblocks;) {
-		nand_read_raw (mtd, buf, from, readlen, ooblen);
+		int ret;
+		
+		if (bd->options & NAND_BBT_SCANEMPTY)
+			if ((ret = nand_read_raw (mtd, buf, from, readlen, ooblen)))
+				return ret;
+
 		for (j = 0; j < len; j++) {
-			if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
-				this->bbt[i >> 3] |= 0x03 << (i & 0x6);
-				printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", 
-					i >> 1, (unsigned int) from);
-				break;
+			if (!(bd->options & NAND_BBT_SCANEMPTY)) {
+				size_t retlen;
+				
+				/* No need to read pages fully, just read required OOB bytes */
+				ret = mtd->read_oob(mtd, from + j * mtd->oobblock + bd->offs,
+							readlen, &retlen, &buf[0]);
+				if (ret)
+					return ret;
+
+				if (check_short_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
+					this->bbt[i >> 3] |= 0x03 << (i & 0x6);
+					printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", 
+						i >> 1, (unsigned int) from);
+					break;
+				}
+			} else {
+				if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
+					this->bbt[i >> 3] |= 0x03 << (i & 0x6);
+					printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", 
+						i >> 1, (unsigned int) from);
+					break;
+				}
 			}
 		}
 		i += 2;
 		from += (1 << this->bbt_erase_shift);
 	}
+	return 0;
 }
 
 /**
@@ -589,14 +646,12 @@ write:
  * The function creates a memory based bbt by scanning the device 
  * for manufacturer / software marked good / bad blocks
 */
-static int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
+static inline int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
 {
 	struct nand_chip *this = mtd->priv;
 
-	/* Ensure that we only scan for the pattern and nothing else */
-	bd->options = 0;
-	create_bbt (mtd, this->data_buf, bd, -1);
-	return 0;
+	bd->options &= ~NAND_BBT_SCANEMPTY;
+	return create_bbt (mtd, this->data_buf, bd, -1);
 }
 
 /**
@@ -808,8 +863,14 @@ int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
 	/* If no primary table decriptor is given, scan the device
 	 * to build a memory based bad block table
 	 */
-	if (!td)
-		return nand_memory_bbt(mtd, bd);
+	if (!td) {
+		if ((res = nand_memory_bbt(mtd, bd))) {
+			printk (KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
+			kfree (this->bbt);
+			this->bbt = NULL;
+		}
+		return res;
+	}
 
 	/* Allocate a temporary buffer for one eraseblock incl. oob */
 	len = (1 << this->bbt_erase_shift);
@@ -904,14 +965,11 @@ out:
 }
 
 /* Define some generic bad / good block scan pattern which are used 
- * while scanning a device for factory marked good / bad blocks
- * 
- * The memory based patterns just 
- */
+ * while scanning a device for factory marked good / bad blocks. */
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
 static struct nand_bbt_descr smallpage_memorybased = {
-	.options = 0,
+	.options = NAND_BBT_SCAN2NDPAGE,
 	.offs = 5,
 	.len = 1,
 	.pattern = scan_ff_pattern
@@ -1042,7 +1100,7 @@ int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt)
 	res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
 
 	DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", 
-		(unsigned int)offs, res, block >> 1);
+		(unsigned int)offs, block >> 1, res);
 
 	switch ((int)res) {
 	case 0x00:	return 0;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 2d8c432..efe2469 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -2,8 +2,8 @@
  *  drivers/mtd/nandids.c
  *
  *  Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
-  *
- * $Id: nand_ids.c,v 1.10 2004/05/26 13:40:12 gleixner Exp $
+ *
+ * $Id: nand_ids.c,v 1.14 2005/06/23 09:38:50 gleixner Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -56,17 +56,24 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"NAND 64MiB 3,3V 16-bit", 	0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
 	
 	{"NAND 128MiB 1,8V 8-bit", 	0x78, 512, 128, 0x4000, 0},
+	{"NAND 128MiB 1,8V 8-bit", 	0x39, 512, 128, 0x4000, 0},
 	{"NAND 128MiB 3,3V 8-bit", 	0x79, 512, 128, 0x4000, 0},
 	{"NAND 128MiB 1,8V 16-bit", 	0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 128MiB 1,8V 16-bit", 	0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
 	{"NAND 128MiB 3,3V 16-bit", 	0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 128MiB 3,3V 16-bit", 	0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
 	
 	{"NAND 256MiB 3,3V 8-bit", 	0x71, 512, 256, 0x4000, 0},
 
-	{"NAND 512MiB 3,3V 8-bit", 	0xDC, 512, 512, 0x4000, 0},
-	
 	/* These are the new chips with large page size. The pagesize
 	* and the erasesize is determined from the extended id bytes
 	*/
+	/*512 Megabit */
+	{"NAND 64MiB 1,8V 8-bit", 	0xA2, 0,  64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 64MiB 3,3V 8-bit", 	0xF2, 0,  64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 64MiB 1,8V 16-bit", 	0xB2, 0,  64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 64MiB 3,3V 16-bit", 	0xC2, 0,  64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	
 	/* 1 Gigabit */
 	{"NAND 128MiB 1,8V 8-bit", 	0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
 	{"NAND 128MiB 3,3V 8-bit", 	0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
@@ -103,7 +110,7 @@ struct nand_flash_dev nand_flash_ids[] = {
 	 * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go
 	 * There are more speed improvements for reads and writes possible, but not implemented now 
 	 */
-	{"AND 128MiB 3,3V 8-bit",	0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY},
+	{"AND 128MiB 3,3V 8-bit",	0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH},
 
 	{NULL,}
 };
@@ -118,6 +125,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_NATIONAL, "National"},
 	{NAND_MFR_RENESAS, "Renesas"},
 	{NAND_MFR_STMICRO, "ST Micro"},
+        {NAND_MFR_HYNIX, "Hynix"},
 	{0x0, "Unknown"}
 };
 
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 13feefd..754b6ed 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -22,7 +22,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
  *
- * $Id: nandsim.c,v 1.7 2004/12/06 11:53:06 dedekind Exp $
+ * $Id: nandsim.c,v 1.8 2005/03/19 15:33:56 dedekind Exp $
  */
 
 #include <linux/config.h>
@@ -1484,33 +1484,6 @@ ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 }
 
 /*
- * Having only NAND chip IDs we call nand_scan which detects NAND flash
- * parameters and then calls scan_bbt in order to scan/find/build the
- * NAND flash bad block table. But since at that moment the NAND flash
- * image isn't allocated in the simulator, errors arise. To avoid this
- * we redefine the scan_bbt callback and initialize the nandsim structure
- * before the flash media scanning.
- */
-int ns_scan_bbt(struct mtd_info *mtd)
-{ 
-	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-	struct nandsim   *ns   = (struct nandsim *)(chip->priv);
-	int retval;
-
-	if (!NS_IS_INITIALIZED(ns))
-		if ((retval = init_nandsim(mtd)) != 0) {
-			NS_ERR("scan_bbt: can't initialize the nandsim structure\n");
-			return retval;
-		}
-	if ((retval = nand_default_bbt(mtd)) != 0) {
-		free_nandsim(ns);
-		return retval;
-	}
-
-	return 0;
-}
-
-/*
  * Module initialization function
  */
 int __init ns_init_module(void)
@@ -1544,7 +1517,6 @@ int __init ns_init_module(void)
 	chip->hwcontrol  = ns_hwcontrol;
 	chip->read_byte  = ns_nand_read_byte;
 	chip->dev_ready  = ns_device_ready;
-	chip->scan_bbt   = ns_scan_bbt;
 	chip->write_byte = ns_nand_write_byte;
 	chip->write_buf  = ns_nand_write_buf;
 	chip->read_buf   = ns_nand_read_buf;
@@ -1552,6 +1524,7 @@ int __init ns_init_module(void)
 	chip->write_word = ns_nand_write_word;
 	chip->read_word  = ns_nand_read_word;
 	chip->eccmode    = NAND_ECC_SOFT;
+	chip->options   |= NAND_SKIP_BBTSCAN;
 
 	/* 
 	 * Perform minimum nandsim structure initialization to handle
@@ -1580,6 +1553,16 @@ int __init ns_init_module(void)
 		goto error;
 	}
 
+	if ((retval = init_nandsim(nsmtd)) != 0) {
+		NS_ERR("scan_bbt: can't initialize the nandsim structure\n");
+		goto error;
+	}
+	
+	if ((retval = nand_default_bbt(nsmtd)) != 0) {
+		free_nandsim(nand);
+		goto error;
+	}
+
 	/* Register NAND as one big partition */
 	add_mtd_partitions(nsmtd, &nand->part, 1);
 
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index 02305a2..031051c 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -6,7 +6,7 @@
  *  Derived from drivers/mtd/nand/spia.c
  *       Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: rtc_from4.c,v 1.7 2004/11/04 12:53:10 gleixner Exp $
+ * $Id: rtc_from4.c,v 1.9 2005/01/24 20:40:11 dmarlin Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -83,13 +83,18 @@ static struct mtd_info *rtc_from4_mtd = NULL;
 #define RTC_FROM4_RS_ECC_CHK		(RTC_FROM4_NAND_ADDR_FPGA | 0x00000070)
 #define RTC_FROM4_RS_ECC_CHK_ERROR	(1 << 7)
 
+#define ERR_STAT_ECC_AVAILABLE		0x20
+
 /* Undefine for software ECC */
 #define RTC_FROM4_HWECC	1
 
+/* Define as 1 for no virtual erase blocks (in JFFS2) */
+#define RTC_FROM4_NO_VIRTBLOCKS	0
+
 /*
  * Module stuff
  */
-static void __iomem *rtc_from4_fio_base = P2SEGADDR(RTC_FROM4_FIO_BASE);
+static void __iomem *rtc_from4_fio_base = (void *)P2SEGADDR(RTC_FROM4_FIO_BASE);
 
 const static struct mtd_partition partition_info[] = {
         {
@@ -267,7 +272,6 @@ static void rtc_from4_nand_select_chip(struct mtd_info *mtd, int chip)
 }
 
 
-
 /*
  * rtc_from4_nand_device_ready - hardware specific ready/busy check
  * @mtd:	MTD device structure
@@ -286,6 +290,40 @@ static int rtc_from4_nand_device_ready(struct mtd_info *mtd)
 
 }
 
+
+/*
+ * deplete - code to perform device recovery in case there was a power loss
+ * @mtd:	MTD device structure
+ * @chip:	Chip to select (0 == slot 3, 1 == slot 4)
+ *
+ * If there was a sudden loss of power during an erase operation, a 
+ * "device recovery" operation must be performed when power is restored
+ * to ensure correct operation.  This routine performs the required steps
+ * for the requested chip.
+ *
+ * See page 86 of the data sheet for details.
+ *
+ */
+static void deplete(struct mtd_info *mtd, int chip)
+{
+        struct nand_chip *this = mtd->priv;
+
+        /* wait until device is ready */
+        while (!this->dev_ready(mtd));
+
+	this->select_chip(mtd, chip);
+                                                                                                                                              
+	/* Send the commands for device recovery, phase 1 */
+	this->cmdfunc (mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0000);
+	this->cmdfunc (mtd, NAND_CMD_DEPLETE2, -1, -1);
+
+	/* Send the commands for device recovery, phase 2 */
+	this->cmdfunc (mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0004);
+	this->cmdfunc (mtd, NAND_CMD_DEPLETE2, -1, -1);
+
+}
+
+
 #ifdef RTC_FROM4_HWECC
 /*
  * rtc_from4_enable_hwecc - hardware specific hardware ECC enable function
@@ -329,6 +367,7 @@ static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode)
 
 }
 
+
 /*
  * rtc_from4_calculate_ecc - hardware specific code to read ECC code
  * @mtd:	MTD device structure
@@ -356,6 +395,7 @@ static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_c
 	ecc_code[7] |= 0x0f;	/* set the last four bits (not used) */
 }
 
+
 /*
  * rtc_from4_correct_data - hardware specific code to correct data using ECC code
  * @mtd:	MTD device structure
@@ -365,16 +405,14 @@ static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_c
  *
  * The FPGA tells us fast, if there's an error or not. If no, we go back happy
  * else we read the ecc results from the fpga and call the rs library to decode
- * and hopefully correct the error
+ * and hopefully correct the error.
  *
- * For now I use the code, which we read from the FLASH to use the RS lib,
- * as the syndrom conversion has a unresolved issue.
  */
 static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_char *ecc1, u_char *ecc2)
 {
 	int i, j, res;
 	unsigned short status; 
-	uint16_t par[6], syn[6], tmp;
+	uint16_t par[6], syn[6];
 	uint8_t ecc[8];
         volatile unsigned short *rs_ecc;
 
@@ -416,15 +454,86 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha
 	}
 
 	/* Let the library code do its magic.*/
-	res = decode_rs8(rs_decoder, buf, par, 512, syn, 0, NULL, 0xff, NULL);
+	res = decode_rs8(rs_decoder, (uint8_t *)buf, par, 512, syn, 0, NULL, 0xff, NULL);
 	if (res > 0) {
 		DEBUG (MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " 
 			"ECC corrected %d errors on read\n", res);
 	}
 	return res;
 }
+
+
+/**
+ * rtc_from4_errstat - perform additional error status checks
+ * @mtd:	MTD device structure
+ * @this:	NAND chip structure
+ * @state:	state or the operation
+ * @status:	status code returned from read status
+ * @page:	startpage inside the chip, must be called with (page & this->pagemask)
+ * 
+ * Perform additional error status checks on erase and write failures 
+ * to determine if errors are correctable.  For this device, correctable 
+ * 1-bit errors on erase and write are considered acceptable.
+ *
+ * note: see pages 34..37 of data sheet for details.
+ *
+ */
+static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page)
+{
+	int	er_stat=0;
+	int	rtn, retlen;
+	size_t	len;
+	uint8_t *buf;
+	int	i;
+
+	this->cmdfunc (mtd, NAND_CMD_STATUS_CLEAR, -1, -1);
+
+        if (state == FL_ERASING) {
+		for (i=0; i<4; i++) {
+			if (status & 1<<(i+1)) {
+				this->cmdfunc (mtd, (NAND_CMD_STATUS_ERROR + i + 1), -1, -1);
+				rtn = this->read_byte(mtd);
+				this->cmdfunc (mtd, NAND_CMD_STATUS_RESET, -1, -1);
+				if (!(rtn & ERR_STAT_ECC_AVAILABLE)) {
+					er_stat |= 1<<(i+1);	/* err_ecc_not_avail */
+				}
+			}
+		}
+	} else if (state == FL_WRITING) {
+		/* single bank write logic */
+		this->cmdfunc (mtd, NAND_CMD_STATUS_ERROR, -1, -1);
+		rtn = this->read_byte(mtd);
+		this->cmdfunc (mtd, NAND_CMD_STATUS_RESET, -1, -1);
+		if (!(rtn & ERR_STAT_ECC_AVAILABLE)) {
+			er_stat |= 1<<1;	/* err_ecc_not_avail */
+		} else {
+			len = mtd->oobblock;
+			buf = kmalloc (len, GFP_KERNEL);
+			if (!buf) {
+				printk (KERN_ERR "rtc_from4_errstat: Out of memory!\n");
+				er_stat = 1;			/* if we can't check, assume failed */
+			} else {
+				/* recovery read */
+				/* page read */
+				rtn = nand_do_read_ecc (mtd, page, len, &retlen, buf, NULL, this->autooob, 1);
+				if (rtn) {	/* if read failed or > 1-bit error corrected */
+					er_stat |= 1<<1;	/* ECC read failed */
+				}
+				kfree(buf);
+			}
+		}
+	}
+
+	rtn = status;
+	if (er_stat == 0) {				/* if ECC is available   */
+		rtn = (status & ~NAND_STATUS_FAIL);	/*   clear the error bit */
+	}
+
+	return rtn;
+}
 #endif
 
+
 /*
  * Main initialization routine
  */
@@ -432,6 +541,7 @@ int __init rtc_from4_init (void)
 {
 	struct nand_chip *this;
 	unsigned short bcr1, bcr2, wcr2;
+	int i;
 
 	/* Allocate memory for MTD device structure and private data */
 	rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof (struct nand_chip),
@@ -483,6 +593,8 @@ int __init rtc_from4_init (void)
 
         this->eccmode = NAND_ECC_HW8_512;
 	this->options |= NAND_HWECC_SYNDROME;
+	/* return the status of extra status and ECC checks */
+	this->errstat = rtc_from4_errstat;
 	/* set the nand_oobinfo to support FPGA H/W error detection */
 	this->autooob = &rtc_from4_nand_oobinfo;
 	this->enable_hwecc = rtc_from4_enable_hwecc;
@@ -504,6 +616,18 @@ int __init rtc_from4_init (void)
 		return -ENXIO;
 	}
 
+	/* Perform 'device recovery' for each chip in case there was a power loss. */
+	for (i=0; i < this->numchips; i++) {
+		deplete(rtc_from4_mtd, i);
+	}
+
+#if RTC_FROM4_NO_VIRTBLOCKS
+	/* use a smaller erase block to minimize wasted space when a block is bad */
+	/* note: this uses eight times as much RAM as using the default and makes */
+	/*       mounts take four times as long. */
+	rtc_from4_mtd->flags |= MTD_NO_VIRTBLOCKS;
+#endif
+
 	/* Register the partitions */
 	add_mtd_partitions(rtc_from4_mtd, partition_info, NUM_PARTITIONS);
 
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index d05e9b9..891e3a1 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -1,17 +1,24 @@
 /* linux/drivers/mtd/nand/s3c2410.c
  *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2004,2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C2410 NAND driver
+ * Samsung S3C2410/S3C240 NAND driver
  *
  * Changelog:
  *	21-Sep-2004  BJD  Initial version
  *	23-Sep-2004  BJD  Mulitple device support
  *	28-Sep-2004  BJD  Fixed ECC placement for Hardware mode
  *	12-Oct-2004  BJD  Fixed errors in use of platform data
+ *	18-Feb-2005  BJD  Fix sparse errors
+ *	14-Mar-2005  BJD  Applied tglx's code reduction patch
+ *	02-May-2005  BJD  Fixed s3c2440 support
+ *	02-May-2005  BJD  Reduced hwcontrol decode
+ *	20-Jun-2005  BJD  Updated s3c2440 support, fixed timing bug
+ *	08-Jul-2005  BJD  Fix OOPS when no platform data supplied
  *
- * $Id: s3c2410.c,v 1.7 2005/01/05 18:05:14 dwmw2 Exp $
+ * $Id: s3c2410.c,v 1.14 2005/07/06 20:05:06 bjd Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -69,10 +76,10 @@ static int hardware_ecc = 0;
  */
 
 static struct nand_oobinfo nand_hw_eccoob = {
-	.useecc = MTD_NANDECC_AUTOPLACE,
-	.eccbytes = 3,
-	.eccpos = {0, 1, 2 },
-	.oobfree = { {8, 8} }
+	.useecc		= MTD_NANDECC_AUTOPLACE,
+	.eccbytes	= 3,
+	.eccpos		= {0, 1, 2 },
+	.oobfree	= { {8, 8} }
 };
 
 /* controller and mtd information */
@@ -99,8 +106,10 @@ struct s3c2410_nand_info {
 	struct device			*device;
 	struct resource			*area;
 	struct clk			*clk;
-	void				*regs;
+	void __iomem			*regs;
 	int				mtd_count;
+
+	unsigned char			is_s3c2440;
 };
 
 /* conversion functions */
@@ -165,12 +174,12 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
 	/* calculate the timing information for the controller */
 
 	if (plat != NULL) {
-		tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 8);
+		tacls  = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4);
 		twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8);
 		twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8);
 	} else {
 		/* default timings */
-		tacls = 8;
+		tacls = 4;
 		twrph0 = 8;
 		twrph1 = 8;
 	}
@@ -185,10 +194,16 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
 	       to_ns(twrph0, clkrate),
 	       to_ns(twrph1, clkrate));
 
-	cfg  = S3C2410_NFCONF_EN;
-	cfg |= S3C2410_NFCONF_TACLS(tacls-1);
-	cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1);
-	cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1);
+	if (!info->is_s3c2440) {
+		cfg  = S3C2410_NFCONF_EN;
+		cfg |= S3C2410_NFCONF_TACLS(tacls-1);
+		cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1);
+		cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1);
+	} else {
+		cfg   = S3C2440_NFCONF_TACLS(tacls-1);
+		cfg  |= S3C2440_NFCONF_TWRPH0(twrph0-1);
+		cfg  |= S3C2440_NFCONF_TWRPH1(twrph1-1);
+	}
 
 	pr_debug(PFX "NF_CONF is 0x%lx\n", cfg);
 
@@ -203,17 +218,22 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
 	struct s3c2410_nand_info *info;
 	struct s3c2410_nand_mtd *nmtd; 
 	struct nand_chip *this = mtd->priv;
+	void __iomem *reg;
 	unsigned long cur;
+	unsigned long bit;
 
 	nmtd = this->priv;
 	info = nmtd->info;
 
-	cur = readl(info->regs + S3C2410_NFCONF);
+	bit = (info->is_s3c2440) ? S3C2440_NFCONT_nFCE : S3C2410_NFCONF_nFCE;
+	reg = info->regs+((info->is_s3c2440) ? S3C2440_NFCONT:S3C2410_NFCONF);
+
+	cur = readl(reg);
 
 	if (chip == -1) {
-		cur |= S3C2410_NFCONF_nFCE;
+		cur |= bit;
 	} else {
-		if (chip > nmtd->set->nr_chips) {
+		if (nmtd->set != NULL && chip > nmtd->set->nr_chips) {
 			printk(KERN_ERR PFX "chip %d out of range\n", chip);
 			return;
 		}
@@ -223,143 +243,76 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
 				(info->platform->select_chip)(nmtd->set, chip);
 		}
 
-		cur &= ~S3C2410_NFCONF_nFCE;
+		cur &= ~bit;
 	}
 
-	writel(cur, info->regs + S3C2410_NFCONF);
+	writel(cur, reg);
 }
 
-/* command and control functions */
+/* command and control functions 
+ *
+ * Note, these all use tglx's method of changing the IO_ADDR_W field
+ * to make the code simpler, and use the nand layer's code to issue the
+ * command and address sequences via the proper IO ports.
+ *
+*/
 
 static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-	unsigned long cur;
+	struct nand_chip *chip = mtd->priv;
 
 	switch (cmd) {
 	case NAND_CTL_SETNCE:
-		cur = readl(info->regs + S3C2410_NFCONF);
-		cur &= ~S3C2410_NFCONF_nFCE;
-		writel(cur, info->regs + S3C2410_NFCONF);
-		break;
-
 	case NAND_CTL_CLRNCE:
-		cur = readl(info->regs + S3C2410_NFCONF);
-		cur |= S3C2410_NFCONF_nFCE;
-		writel(cur, info->regs + S3C2410_NFCONF);
+		printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__);
 		break;
 
-		/* we don't need to implement these */
 	case NAND_CTL_SETCLE:
-	case NAND_CTL_CLRCLE:
+		chip->IO_ADDR_W = info->regs + S3C2410_NFCMD;
+		break;
+
 	case NAND_CTL_SETALE:
-	case NAND_CTL_CLRALE:
-		pr_debug(PFX "s3c2410_nand_hwcontrol(%d) unusedn", cmd);
+		chip->IO_ADDR_W = info->regs + S3C2410_NFADDR;
+		break;
+
+		/* NAND_CTL_CLRCLE: */
+		/* NAND_CTL_CLRALE: */
+	default:
+		chip->IO_ADDR_W = info->regs + S3C2410_NFDATA;
 		break;
 	}
 }
 
-/* s3c2410_nand_command
- *
- * This function implements sending commands and the relevant address
- * information to the chip, via the hardware controller. Since the
- * S3C2410 generates the correct ALE/CLE signaling automatically, we
- * do not need to use hwcontrol.
-*/
+/* command and control functions */
 
-static void s3c2410_nand_command (struct mtd_info *mtd, unsigned command,
-				  int column, int page_addr)
+static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd)
 {
-	register struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-	register struct nand_chip *this = mtd->priv;
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	struct nand_chip *chip = mtd->priv;
 
-	/*
-	 * Write out the command to the device.
-	 */
-	if (command == NAND_CMD_SEQIN) {
-		int readcmd;
-
-		if (column >= mtd->oobblock) {
-			/* OOB area */
-			column -= mtd->oobblock;
-			readcmd = NAND_CMD_READOOB;
-		} else if (column < 256) {
-			/* First 256 bytes --> READ0 */
-			readcmd = NAND_CMD_READ0;
-		} else {
-			column -= 256;
-			readcmd = NAND_CMD_READ1;
-		}
-		
-		writeb(readcmd, info->regs + S3C2410_NFCMD);
-	}
-	writeb(command, info->regs + S3C2410_NFCMD);
+	switch (cmd) {
+	case NAND_CTL_SETNCE:
+	case NAND_CTL_CLRNCE:
+		printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__);
+		break;
 
-	/* Set ALE and clear CLE to start address cycle */
+	case NAND_CTL_SETCLE:
+		chip->IO_ADDR_W = info->regs + S3C2440_NFCMD;
+		break;
 
-	if (column != -1 || page_addr != -1) {
+	case NAND_CTL_SETALE:
+		chip->IO_ADDR_W = info->regs + S3C2440_NFADDR;
+		break;
 
-		/* Serially input address */
-		if (column != -1) {
-			/* Adjust columns for 16 bit buswidth */
-			if (this->options & NAND_BUSWIDTH_16)
-				column >>= 1;
-			writeb(column, info->regs + S3C2410_NFADDR);
-		}
-		if (page_addr != -1) {
-			writeb((unsigned char) (page_addr), info->regs + S3C2410_NFADDR);
-			writeb((unsigned char) (page_addr >> 8), info->regs + S3C2410_NFADDR);
-			/* One more address cycle for higher density devices */
-			if (this->chipsize & 0x0c000000) 
-				writeb((unsigned char) ((page_addr >> 16) & 0x0f),
-				       info->regs + S3C2410_NFADDR);
-		}
-		/* Latch in address */
-	}
-	
-	/* 
-	 * program and erase have their own busy handlers 
-	 * status and sequential in needs no delay
-	*/
-	switch (command) {
-			
-	case NAND_CMD_PAGEPROG:
-	case NAND_CMD_ERASE1:
-	case NAND_CMD_ERASE2:
-	case NAND_CMD_SEQIN:
-	case NAND_CMD_STATUS:
-		return;
-
-	case NAND_CMD_RESET:
-		if (this->dev_ready)	
-			break;
-
-		udelay(this->chip_delay);
-		writeb(NAND_CMD_STATUS, info->regs + S3C2410_NFCMD);
-
-		while ( !(this->read_byte(mtd) & 0x40));
-		return;
-
-	/* This applies to read commands */	
+		/* NAND_CTL_CLRCLE: */
+		/* NAND_CTL_CLRALE: */
 	default:
-		/* 
-		 * If we don't have access to the busy pin, we apply the given
-		 * command delay
-		*/
-		if (!this->dev_ready) {
-			udelay (this->chip_delay);
-			return;
-		}	
+		chip->IO_ADDR_W = info->regs + S3C2440_NFDATA;
+		break;
 	}
-	
-	/* Apply this short delay always to ensure that we do wait tWB in
-	 * any case on any machine. */
-	ndelay (100);
-	/* wait until command is processed */
-	while (!this->dev_ready(mtd));
 }
 
-
 /* s3c2410_nand_devready()
  *
  * returns 0 if the nand is busy, 1 if it is ready
@@ -369,9 +322,12 @@ static int s3c2410_nand_devready(struct mtd_info *mtd)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
 	
+	if (info->is_s3c2440)
+		return readb(info->regs + S3C2440_NFSTAT) & S3C2440_NFSTAT_READY;
 	return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY;
 }
 
+
 /* ECC handling functions */
 
 static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
@@ -394,6 +350,12 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 	return -1;
 }
 
+/* ECC functions
+ *
+ * These allow the s3c2410 and s3c2440 to use the controller's ECC
+ * generator block to ECC the data as it passes through]
+*/
+
 static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
@@ -404,6 +366,15 @@ static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 	writel(ctrl, info->regs + S3C2410_NFCONF);
 }
 
+static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned long ctrl;
+
+	ctrl = readl(info->regs + S3C2440_NFCONT);
+	writel(ctrl | S3C2440_NFCONT_INITECC, info->regs + S3C2440_NFCONT);
+}
+
 static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd,
 				      const u_char *dat, u_char *ecc_code)
 {
@@ -420,7 +391,26 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd,
 }
 
 
-/* over-ride the standard functions for a little more speed? */
+static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd,
+				      const u_char *dat, u_char *ecc_code)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned long ecc = readl(info->regs + S3C2440_NFMECC0);
+
+	ecc_code[0] = ecc;
+	ecc_code[1] = ecc >> 8;
+	ecc_code[2] = ecc >> 16;
+
+	pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n",
+		 ecc_code[0], ecc_code[1], ecc_code[2]);
+
+	return 0;
+}
+
+
+/* over-ride the standard functions for a little more speed. We can
+ * use read/write block to move the data buffers to/from the controller
+*/
 
 static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
@@ -523,11 +513,10 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 {
 	struct nand_chip *chip = &nmtd->chip;
 
-	chip->IO_ADDR_R	   = (char *)info->regs + S3C2410_NFDATA;
-	chip->IO_ADDR_W    = (char *)info->regs + S3C2410_NFDATA;
+	chip->IO_ADDR_R	   = info->regs + S3C2410_NFDATA;
+	chip->IO_ADDR_W    = info->regs + S3C2410_NFDATA;
 	chip->hwcontrol    = s3c2410_nand_hwcontrol;
 	chip->dev_ready    = s3c2410_nand_devready;
-	chip->cmdfunc      = s3c2410_nand_command;
 	chip->write_buf    = s3c2410_nand_write_buf;
 	chip->read_buf     = s3c2410_nand_read_buf;
 	chip->select_chip  = s3c2410_nand_select_chip;
@@ -536,6 +525,12 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 	chip->options	   = 0;
 	chip->controller   = &info->controller;
 
+	if (info->is_s3c2440) {
+		chip->IO_ADDR_R	 = info->regs + S3C2440_NFDATA;
+		chip->IO_ADDR_W  = info->regs + S3C2440_NFDATA;
+		chip->hwcontrol  = s3c2440_nand_hwcontrol;
+	}
+
 	nmtd->info	   = info;
 	nmtd->mtd.priv	   = chip;
 	nmtd->set	   = set;
@@ -546,6 +541,11 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 		chip->calculate_ecc = s3c2410_nand_calculate_ecc;
 		chip->eccmode	    = NAND_ECC_HW3_512;
 		chip->autooob       = &nand_hw_eccoob;
+
+		if (info->is_s3c2440) {
+			chip->enable_hwecc  = s3c2440_nand_enable_hwecc;
+			chip->calculate_ecc = s3c2440_nand_calculate_ecc;
+		}
 	} else {
 		chip->eccmode	    = NAND_ECC_SOFT;
 	}
@@ -559,7 +559,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
  * nand layer to look for devices
 */
 
-static int s3c2410_nand_probe(struct device *dev)
+static int s3c24xx_nand_probe(struct device *dev, int is_s3c2440)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct s3c2410_platform_nand *plat = to_nand_plat(dev);
@@ -585,6 +585,7 @@ static int s3c2410_nand_probe(struct device *dev)
 	dev_set_drvdata(dev, info);
 
 	spin_lock_init(&info->controller.lock);
+	init_waitqueue_head(&info->controller.wq);
 
 	/* get the clock source and enable it */
 
@@ -600,7 +601,8 @@ static int s3c2410_nand_probe(struct device *dev)
 
 	/* allocate and map the resource */
 
-	res = pdev->resource;  /* assume that the flash has one resource */
+	/* currently we assume we have the one resource */
+	res  = pdev->resource;
 	size = res->end - res->start + 1;
 
 	info->area = request_mem_region(res->start, size, pdev->name);
@@ -611,9 +613,10 @@ static int s3c2410_nand_probe(struct device *dev)
 		goto exit_error;
 	}
 
-	info->device = dev;
-	info->platform = plat;
-	info->regs = ioremap(res->start, size);
+	info->device     = dev;
+	info->platform   = plat;
+	info->regs       = ioremap(res->start, size);
+	info->is_s3c2440 = is_s3c2440;
 
 	if (info->regs == NULL) {
 		printk(KERN_ERR PFX "cannot reserve register region\n");
@@ -678,6 +681,18 @@ static int s3c2410_nand_probe(struct device *dev)
 	return err;
 }
 
+/* driver device registration */
+
+static int s3c2410_nand_probe(struct device *dev)
+{
+	return s3c24xx_nand_probe(dev, 0);
+}
+
+static int s3c2440_nand_probe(struct device *dev)
+{
+	return s3c24xx_nand_probe(dev, 1);
+}
+
 static struct device_driver s3c2410_nand_driver = {
 	.name		= "s3c2410-nand",
 	.bus		= &platform_bus_type,
@@ -685,14 +700,24 @@ static struct device_driver s3c2410_nand_driver = {
 	.remove		= s3c2410_nand_remove,
 };
 
+static struct device_driver s3c2440_nand_driver = {
+	.name		= "s3c2440-nand",
+	.bus		= &platform_bus_type,
+	.probe		= s3c2440_nand_probe,
+	.remove		= s3c2410_nand_remove,
+};
+
 static int __init s3c2410_nand_init(void)
 {
-	printk("S3C2410 NAND Driver, (c) 2004 Simtec Electronics\n");
+	printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n");
+
+	driver_register(&s3c2440_nand_driver);
 	return driver_register(&s3c2410_nand_driver);
 }
 
 static void __exit s3c2410_nand_exit(void)
 {
+	driver_unregister(&s3c2440_nand_driver);
 	driver_unregister(&s3c2410_nand_driver);
 }
 
@@ -701,4 +726,4 @@ module_exit(s3c2410_nand_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("S3C2410 MTD NAND driver");
+MODULE_DESCRIPTION("S3C24XX MTD NAND driver");
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 2957279..9853b87 100755..100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 2004 Richard Purdie
  *
- *  $Id: sharpsl.c,v 1.3 2005/01/03 14:53:50 rpurdie Exp $
+ *  $Id: sharpsl.c,v 1.4 2005/01/23 11:09:19 rpurdie Exp $
  *
  *  Based on Sharp's NAND driver sharp_sl.c
  *
@@ -216,7 +216,7 @@ sharpsl_nand_init(void)
 		nr_partitions = DEFAULT_NUM_PARTITIONS;
 		sharpsl_partition_info = sharpsl_nand_default_partition_info;
 		if (machine_is_poodle()) {
-			sharpsl_partition_info[1].size=22 * 1024 * 1024;
+			sharpsl_partition_info[1].size=30 * 1024 * 1024;
 		} else if (machine_is_corgi() || machine_is_shepherd()) {
 			sharpsl_partition_info[1].size=25 * 1024 * 1024;
 		} else if (machine_is_husky()) {
diff --git a/drivers/mtd/nand/tx4925ndfmc.c b/drivers/mtd/nand/tx4925ndfmc.c
deleted file mode 100644
index bba6888..0000000
--- a/drivers/mtd/nand/tx4925ndfmc.c
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- *  drivers/mtd/tx4925ndfmc.c
- *
- *  Overview:
- *   This is a device driver for the NAND flash device found on the
- *   Toshiba RBTX4925 reference board, which is a SmartMediaCard. It supports 
- *   16MiB, 32MiB and 64MiB cards.
- *
- * Author: MontaVista Software, Inc.  source@mvista.com
- *
- * Derived from drivers/mtd/autcpu12.c
- *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- * $Id: tx4925ndfmc.c,v 1.5 2004/10/05 13:50:20 gleixner Exp $
- *
- * Copyright (C) 2001 Toshiba Corporation 
- * 
- * 2003 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/tx4925/tx4925_nand.h>
-
-extern struct nand_oobinfo jffs2_oobinfo;
-
-/*
- * MTD structure for RBTX4925 board
- */
-static struct mtd_info *tx4925ndfmc_mtd = NULL;
-
-/*
- * Define partitions for flash devices
- */
-
-static struct mtd_partition partition_info16k[] = {
-	{ .name = "RBTX4925 flash partition 1",
-	  .offset =  0,
-	  .size =    8 * 0x00100000 },
-	{ .name = "RBTX4925 flash partition 2",
-	  .offset =  8 * 0x00100000,
-	  .size =    8 * 0x00100000 },
-};
-
-static struct mtd_partition partition_info32k[] = {
-	{ .name = "RBTX4925 flash partition 1",
-	  .offset =  0,
-	  .size =    8 * 0x00100000 },
-	{ .name = "RBTX4925 flash partition 2",
-	  .offset = 8 * 0x00100000,
-	  .size =  24 * 0x00100000 },
-};
-
-static struct mtd_partition partition_info64k[] = {
-	{ .name = "User FS",
-	  .offset =  0,
-	  .size =   16 * 0x00100000 },
-	{ .name = "RBTX4925 flash partition 2",
-	  .offset = 16 * 0x00100000,
-	  .size =   48 * 0x00100000},
-};
-
-static struct mtd_partition partition_info128k[] = {
-	{ .name = "Skip bad section",
-	  .offset =  0,
-	  .size =   16 * 0x00100000 },
-	{ .name = "User FS",
-	  .offset = 16 * 0x00100000,
-	  .size =   112 * 0x00100000 },
-};
-#define NUM_PARTITIONS16K  2
-#define NUM_PARTITIONS32K  2
-#define NUM_PARTITIONS64K  2
-#define NUM_PARTITIONS128K 2
-
-/* 
- *	hardware specific access to control-lines
-*/
-static void tx4925ndfmc_hwcontrol(struct mtd_info *mtd, int cmd)
-{
-
-	switch(cmd){
-
-		case NAND_CTL_SETCLE: 
-			tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_CLE;
-			break;
-		case NAND_CTL_CLRCLE:
-			tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_CLE;
-			break;
-		case NAND_CTL_SETALE:
-			tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ALE;
-			break;
-		case NAND_CTL_CLRALE: 
-			tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ALE;
-			break;
-		case NAND_CTL_SETNCE:
-			tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_CE;
-			break;
-		case NAND_CTL_CLRNCE:
-			tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_CE;
-			break;
-		case NAND_CTL_SETWP:
-			tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_WE;
-			break;
-		case NAND_CTL_CLRWP:
-			tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_WE;
-			break;
-	}
-}
-
-/*
-*	read device ready pin
-*/
-static int tx4925ndfmc_device_ready(struct mtd_info *mtd)
-{
-	int ready;
-	ready = (tx4925_ndfmcptr->sr & TX4925_NDSFR_BUSY) ? 0 : 1;
-	return ready;
-}
-void tx4925ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
-{
-	/* reset first */
-	tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_MASK;
-	tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK;
-	tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_ENAB;
-}
-static void tx4925ndfmc_disable_ecc(void)
-{
-	tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK;
-}
-static void tx4925ndfmc_enable_read_ecc(void)
-{
-	tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK;
-	tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_READ;
-}
-void tx4925ndfmc_readecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code){
-	int i;
-	u_char *ecc = ecc_code;
-        tx4925ndfmc_enable_read_ecc();
-	for (i = 0;i < 6;i++,ecc++)
-		*ecc = tx4925_read_nfmc(&(tx4925_ndfmcptr->dtr));
-        tx4925ndfmc_disable_ecc();
-}
-void tx4925ndfmc_device_setup(void)
-{
-
-	*(unsigned char *)0xbb005000 &= ~0x08;
-
-        /* reset NDFMC */
-        tx4925_ndfmcptr->rstr |= TX4925_NDFRSTR_RST;
-	while (tx4925_ndfmcptr->rstr & TX4925_NDFRSTR_RST);       
-
-	/* setup BusSeparete, Hold Time, Strobe Pulse Width */
-	tx4925_ndfmcptr->mcr = TX4925_BSPRT ? TX4925_NDFMCR_BSPRT : 0;
-	tx4925_ndfmcptr->spr = TX4925_HOLD << 4 | TX4925_SPW;             
-}
-static u_char tx4925ndfmc_nand_read_byte(struct mtd_info *mtd)
-{
-        struct nand_chip *this = mtd->priv;
-        return tx4925_read_nfmc(this->IO_ADDR_R);
-}
-
-static void tx4925ndfmc_nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
-        struct nand_chip *this = mtd->priv;
-        tx4925_write_nfmc(byte, this->IO_ADDR_W);
-}
-
-static void tx4925ndfmc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-	struct nand_chip *this = mtd->priv;
-
-	for (i=0; i<len; i++)
-		tx4925_write_nfmc(buf[i], this->IO_ADDR_W);
-}
-
-static void tx4925ndfmc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
-	int i;
-	struct nand_chip *this = mtd->priv;
-
-	for (i=0; i<len; i++)
-		buf[i] = tx4925_read_nfmc(this->IO_ADDR_R);
-}
-
-static int tx4925ndfmc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-	struct nand_chip *this = mtd->priv;
-
-	for (i=0; i<len; i++)
-		if (buf[i] != tx4925_read_nfmc(this->IO_ADDR_R))
-			return -EFAULT;
-
-	return 0;
-}
-
-/*
- * Send command to NAND device
- */
-static void tx4925ndfmc_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
-{
-	register struct nand_chip *this = mtd->priv;
-
-	/* Begin command latch cycle */
-	this->hwcontrol(mtd, NAND_CTL_SETCLE);
-	/*
-	 * Write out the command to the device.
-	 */
-	if (command == NAND_CMD_SEQIN) {
-		int readcmd;
-
-		if (column >= mtd->oobblock) {
-			/* OOB area */
-			column -= mtd->oobblock;
-			readcmd = NAND_CMD_READOOB;
-		} else if (column < 256) {
-			/* First 256 bytes --> READ0 */
-			readcmd = NAND_CMD_READ0;
-		} else {
-			column -= 256;
-			readcmd = NAND_CMD_READ1;
-		}
-		this->write_byte(mtd, readcmd);
-	}
-	this->write_byte(mtd, command);
-
-	/* Set ALE and clear CLE to start address cycle */
-	this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-
-	if (column != -1 || page_addr != -1) {
-		this->hwcontrol(mtd, NAND_CTL_SETALE);
-
-		/* Serially input address */
-		if (column != -1)
-			this->write_byte(mtd, column);
-		if (page_addr != -1) {
-			this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
-			this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
-			/* One more address cycle for higher density devices */
-			if (mtd->size & 0x0c000000) 
-				this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
-		}
-		/* Latch in address */
-		this->hwcontrol(mtd, NAND_CTL_CLRALE);
-	}
-	
-	/* 
-	 * program and erase have their own busy handlers 
-	 * status and sequential in needs no delay
-	*/
-	switch (command) {
-			
-	case NAND_CMD_PAGEPROG:
-		/* Turn off WE */
-		this->hwcontrol (mtd, NAND_CTL_CLRWP);
-                return;
-
-	case NAND_CMD_SEQIN:
-		/* Turn on WE */
-		this->hwcontrol (mtd, NAND_CTL_SETWP);
-                return;
-
-	case NAND_CMD_ERASE1:
-	case NAND_CMD_ERASE2:
-	case NAND_CMD_STATUS:
-		return;
-
-	case NAND_CMD_RESET:
-		if (this->dev_ready)	
-			break;
-		this->hwcontrol(mtd, NAND_CTL_SETCLE);
-		this->write_byte(mtd, NAND_CMD_STATUS);
-		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-		while ( !(this->read_byte(mtd) & 0x40));
-		return;
-
-	/* This applies to read commands */	
-	default:
-		/* 
-		 * If we don't have access to the busy pin, we apply the given
-		 * command delay
-		*/
-		if (!this->dev_ready) {
-			udelay (this->chip_delay);
-			return;
-		}	
-	}
-	
-	/* wait until command is processed */
-	while (!this->dev_ready(mtd));
-}
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partitio
-n **pparts, char *);
-#endif
-
-/*
- * Main initialization routine
- */
-extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
-int __init tx4925ndfmc_init (void)
-{
-	struct nand_chip *this;
-	int err = 0;
-
-	/* Allocate memory for MTD device structure and private data */
-	tx4925ndfmc_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
-				GFP_KERNEL);
-	if (!tx4925ndfmc_mtd) {
-		printk ("Unable to allocate RBTX4925 NAND MTD device structure.\n");
-		err = -ENOMEM;
-		goto out;
-	}
-
-        tx4925ndfmc_device_setup();
-
-	/* io is indirect via a register so don't need to ioremap address */
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *) (&tx4925ndfmc_mtd[1]);
-
-	/* Initialize structures */
-	memset((char *) tx4925ndfmc_mtd, 0, sizeof(struct mtd_info));
-	memset((char *) this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	tx4925ndfmc_mtd->priv = this;
-
-	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = (void __iomem *)&(tx4925_ndfmcptr->dtr);
-	this->IO_ADDR_W = (void __iomem *)&(tx4925_ndfmcptr->dtr);
-	this->hwcontrol = tx4925ndfmc_hwcontrol;
-	this->enable_hwecc = tx4925ndfmc_enable_hwecc;
-	this->calculate_ecc = tx4925ndfmc_readecc;
-	this->correct_data = nand_correct_data;
-	this->eccmode = NAND_ECC_HW6_512;	
-	this->dev_ready = tx4925ndfmc_device_ready;
-	/* 20 us command delay time */
-	this->chip_delay = 20;		
-        this->read_byte = tx4925ndfmc_nand_read_byte;
-        this->write_byte = tx4925ndfmc_nand_write_byte;
-	this->cmdfunc = tx4925ndfmc_nand_command;
-	this->write_buf = tx4925ndfmc_nand_write_buf;
-	this->read_buf = tx4925ndfmc_nand_read_buf;
-	this->verify_buf = tx4925ndfmc_nand_verify_buf;
-
-	/* Scan to find existance of the device */
-	if (nand_scan (tx4925ndfmc_mtd, 1)) {
-		err = -ENXIO;
-		goto out_ior;
-	}
-
-	/* Register the partitions */
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-        {
-                int mtd_parts_nb = 0;
-                struct mtd_partition *mtd_parts = 0;
-                mtd_parts_nb = parse_cmdline_partitions(tx4925ndfmc_mtd, &mtd_parts, "tx4925ndfmc");
-                if (mtd_parts_nb > 0)
-                        add_mtd_partitions(tx4925ndfmc_mtd, mtd_parts, mtd_parts_nb);
-                else
-                        add_mtd_device(tx4925ndfmc_mtd);
-        }
-#else /* ifdef CONFIG_MTD_CMDLINE_PARTS */
-	switch(tx4925ndfmc_mtd->size){
-		case 0x01000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info16k, NUM_PARTITIONS16K); break;
-		case 0x02000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info32k, NUM_PARTITIONS32K); break;
-		case 0x04000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info64k, NUM_PARTITIONS64K); break; 
-		case 0x08000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info128k, NUM_PARTITIONS128K); break; 
-		default: {
-			printk ("Unsupported SmartMedia device\n"); 
-			err = -ENXIO;
-			goto out_ior;
-		}
-	}
-#endif /* ifdef CONFIG_MTD_CMDLINE_PARTS */
-	goto out;
-
-out_ior:
-out:
-	return err;
-}
-
-module_init(tx4925ndfmc_init);
-
-/*
- * Clean up routine
- */
-#ifdef MODULE
-static void __exit tx4925ndfmc_cleanup (void)
-{
-	/* Release resources, unregister device */
-	nand_release (tx4925ndfmc_mtd);
-
-	/* Free the MTD device structure */
-	kfree (tx4925ndfmc_mtd);
-}
-module_exit(tx4925ndfmc_cleanup);
-#endif
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
-MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBTX4925");
diff --git a/drivers/mtd/nand/tx4938ndfmc.c b/drivers/mtd/nand/tx4938ndfmc.c
deleted file mode 100644
index df26e58..0000000
--- a/drivers/mtd/nand/tx4938ndfmc.c
+++ /dev/null
@@ -1,406 +0,0 @@
-/*
- * drivers/mtd/nand/tx4938ndfmc.c
- *
- *  Overview:
- *   This is a device driver for the NAND flash device connected to
- *   TX4938 internal NAND Memory Controller.
- *   TX4938 NDFMC is almost same as TX4925 NDFMC, but register size are 64 bit.
- *
- * Author: source@mvista.com
- *
- * Based on spia.c by Steven J. Hill
- *
- * $Id: tx4938ndfmc.c,v 1.4 2004/10/05 13:50:20 gleixner Exp $
- *
- * Copyright (C) 2000-2001 Toshiba Corporation 
- *
- * 2003 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/config.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/bootinfo.h>
-#include <linux/delay.h>
-#include <asm/tx4938/rbtx4938.h>
-
-extern struct nand_oobinfo jffs2_oobinfo;
-
-/*
- * MTD structure for TX4938 NDFMC
- */
-static struct mtd_info *tx4938ndfmc_mtd;
-
-/*
- * Define partitions for flash device
- */
-#define flush_wb()	(void)tx4938_ndfmcptr->mcr;
-
-#define NUM_PARTITIONS  	3
-#define NUMBER_OF_CIS_BLOCKS	24
-#define SIZE_OF_BLOCK		0x00004000
-#define NUMBER_OF_BLOCK_PER_ZONE 1024
-#define SIZE_OF_ZONE		(NUMBER_OF_BLOCK_PER_ZONE * SIZE_OF_BLOCK)
-#ifndef CONFIG_MTD_CMDLINE_PARTS
-/*
- * You can use the following sample of MTD partitions 
- * on the NAND Flash Memory 32MB or more.
- *
- * The following figure shows the image of the sample partition on
- * the 32MB NAND Flash Memory. 
- *
- *   Block No.
- *    0 +-----------------------------+ ------
- *      |             CIS             |   ^
- *   24 +-----------------------------+   |
- *      |         kernel image        |   | Zone 0
- *      |                             |   |
- *      +-----------------------------+   |
- * 1023 |         unused area         |   v
- *      +-----------------------------+ ------
- * 1024 |            JFFS2            |   ^
- *      |                             |   |
- *      |                             |   | Zone 1
- *      |                             |   |
- *      |                             |   |
- *      |                             |   v
- * 2047 +-----------------------------+ ------
- *
- */
-static struct mtd_partition partition_info[NUM_PARTITIONS] = {
-	{
-		.name = "RBTX4938 CIS Area",
- 		.offset =  0,
- 		.size =    (NUMBER_OF_CIS_BLOCKS * SIZE_OF_BLOCK),
- 		.mask_flags  = MTD_WRITEABLE	/* This partition is NOT writable */
- 	},
- 	{
- 		.name = "RBTX4938 kernel image",
- 		.offset =  MTDPART_OFS_APPEND,
- 		.size =    8 * 0x00100000,	/* 8MB (Depends on size of kernel image) */
- 		.mask_flags  = MTD_WRITEABLE	/* This partition is NOT writable */
- 	},
- 	{
- 		.name = "Root FS (JFFS2)",
- 		.offset =  (0 + SIZE_OF_ZONE),    /* start address of next zone */
- 		.size =    MTDPART_SIZ_FULL
- 	},
-};
-#endif
-
-static void tx4938ndfmc_hwcontrol(struct mtd_info *mtd, int cmd)
-{
-	switch (cmd) {
-		case NAND_CTL_SETCLE:
-			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_CLE;
-			break;
-		case NAND_CTL_CLRCLE:
-			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_CLE;
-			break;
-		case NAND_CTL_SETALE:
-			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_ALE;
-			break;
-		case NAND_CTL_CLRALE:
-			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_ALE;
-			break;
-		/* TX4938_NDFMCR_CE bit is 0:high 1:low */
-		case NAND_CTL_SETNCE:
-			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_CE;
-			break;
-		case NAND_CTL_CLRNCE:
-			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_CE;
-			break;
-		case NAND_CTL_SETWP:
-			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_WE;
-			break;
-		case NAND_CTL_CLRWP:
-			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_WE;
-			break;
-	}
-}
-static int tx4938ndfmc_dev_ready(struct mtd_info *mtd)
-{
-	flush_wb();
-	return !(tx4938_ndfmcptr->sr & TX4938_NDFSR_BUSY);
-}
-static void tx4938ndfmc_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
-{
-	u32 mcr = tx4938_ndfmcptr->mcr;
-	mcr &= ~TX4938_NDFMCR_ECC_ALL;
-	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
-	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_READ;
-	ecc_code[1] = tx4938_ndfmcptr->dtr;
-	ecc_code[0] = tx4938_ndfmcptr->dtr;
-	ecc_code[2] = tx4938_ndfmcptr->dtr;
-	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
-}
-static void tx4938ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
-{
-	u32 mcr = tx4938_ndfmcptr->mcr;
-	mcr &= ~TX4938_NDFMCR_ECC_ALL;
-	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_RESET;
-	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
-	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_ON;
-}
-
-static u_char tx4938ndfmc_nand_read_byte(struct mtd_info *mtd)
-{
-	struct nand_chip *this = mtd->priv;
-	return tx4938_read_nfmc(this->IO_ADDR_R);
-}
-
-static void tx4938ndfmc_nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
-	struct nand_chip *this = mtd->priv;
-	tx4938_write_nfmc(byte, this->IO_ADDR_W);
-}
-
-static void tx4938ndfmc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-	struct nand_chip *this = mtd->priv;
-
-	for (i=0; i<len; i++)
-		tx4938_write_nfmc(buf[i], this->IO_ADDR_W);
-}
-
-static void tx4938ndfmc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
-	int i;
-	struct nand_chip *this = mtd->priv;
-
-	for (i=0; i<len; i++)
-		buf[i] = tx4938_read_nfmc(this->IO_ADDR_R);
-}
-
-static int tx4938ndfmc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-	struct nand_chip *this = mtd->priv;
-
-	for (i=0; i<len; i++)
-		if (buf[i] != tx4938_read_nfmc(this->IO_ADDR_R))
-			return -EFAULT;
-
-	return 0;
-}
-
-/*
- * Send command to NAND device
- */
-static void tx4938ndfmc_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
-{
-	register struct nand_chip *this = mtd->priv;
-
-	/* Begin command latch cycle */
-	this->hwcontrol(mtd, NAND_CTL_SETCLE);
-	/*
-	 * Write out the command to the device.
-	 */
-	if (command == NAND_CMD_SEQIN) {
-		int readcmd;
-
-		if (column >= mtd->oobblock) {
-			/* OOB area */
-			column -= mtd->oobblock;
-			readcmd = NAND_CMD_READOOB;
-		} else if (column < 256) {
-			/* First 256 bytes --> READ0 */
-			readcmd = NAND_CMD_READ0;
-		} else {
-			column -= 256;
-			readcmd = NAND_CMD_READ1;
-		}
-		this->write_byte(mtd, readcmd);
-	}
-	this->write_byte(mtd, command);
-
-	/* Set ALE and clear CLE to start address cycle */
-	this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-
-	if (column != -1 || page_addr != -1) {
-		this->hwcontrol(mtd, NAND_CTL_SETALE);
-
-		/* Serially input address */
-		if (column != -1)
-			this->write_byte(mtd, column);
-		if (page_addr != -1) {
-			this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
-			this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
-			/* One more address cycle for higher density devices */
-			if (mtd->size & 0x0c000000) 
-				this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
-		}
-		/* Latch in address */
-		this->hwcontrol(mtd, NAND_CTL_CLRALE);
-	}
-	
-	/* 
-	 * program and erase have their own busy handlers 
-	 * status and sequential in needs no delay
-	*/
-	switch (command) {
-			
-	case NAND_CMD_PAGEPROG:
-		/* Turn off WE */
-		this->hwcontrol (mtd, NAND_CTL_CLRWP);
-                return;
-
-	case NAND_CMD_SEQIN:
-		/* Turn on WE */
-		this->hwcontrol (mtd, NAND_CTL_SETWP);
-                return;
-
-	case NAND_CMD_ERASE1:
-	case NAND_CMD_ERASE2:
-	case NAND_CMD_STATUS:
-		return;
-
-	case NAND_CMD_RESET:
-		if (this->dev_ready)	
-			break;
-		this->hwcontrol(mtd, NAND_CTL_SETCLE);
-		this->write_byte(mtd, NAND_CMD_STATUS);
-		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-		while ( !(this->read_byte(mtd) & 0x40));
-		return;
-
-	/* This applies to read commands */	
-	default:
-		/* 
-		 * If we don't have access to the busy pin, we apply the given
-		 * command delay
-		*/
-		if (!this->dev_ready) {
-			udelay (this->chip_delay);
-			return;
-		}	
-	}
-	
-	/* wait until command is processed */
-	while (!this->dev_ready(mtd));
-}
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, char *);
-#endif
-/*
- * Main initialization routine
- */
-int __init tx4938ndfmc_init (void)
-{
-	struct nand_chip *this;
-	int bsprt = 0, hold = 0xf, spw = 0xf;
-	int protected = 0;
-
-	if ((*rbtx4938_piosel_ptr & 0x0c) != 0x08) {
-		printk("TX4938 NDFMC: disabled by IOC PIOSEL\n");
-		return -ENODEV;
-	}
-	bsprt = 1;
-	hold = 2;
-	spw = 9 - 1;	/* 8 GBUSCLK = 80ns (@ GBUSCLK 100MHz) */
-
-	if ((tx4938_ccfgptr->pcfg &
-	     (TX4938_PCFG_ATA_SEL|TX4938_PCFG_ISA_SEL|TX4938_PCFG_NDF_SEL))
-	    != TX4938_PCFG_NDF_SEL) {
-		printk("TX4938 NDFMC: disabled by PCFG.\n");
-		return -ENODEV;
-	}
-
-	/* reset NDFMC */
-	tx4938_ndfmcptr->rstr |= TX4938_NDFRSTR_RST;
-	while (tx4938_ndfmcptr->rstr & TX4938_NDFRSTR_RST)
-		;
-	/* setup BusSeparete, Hold Time, Strobe Pulse Width */
-	tx4938_ndfmcptr->mcr = bsprt ? TX4938_NDFMCR_BSPRT : 0;
-	tx4938_ndfmcptr->spr = hold << 4 | spw;
-
-	/* Allocate memory for MTD device structure and private data */
-	tx4938ndfmc_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
-				      GFP_KERNEL);
-	if (!tx4938ndfmc_mtd) {
-		printk ("Unable to allocate TX4938 NDFMC MTD device structure.\n");
-		return -ENOMEM;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *) (&tx4938ndfmc_mtd[1]);
-
-	/* Initialize structures */
-	memset((char *) tx4938ndfmc_mtd, 0, sizeof(struct mtd_info));
-	memset((char *) this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	tx4938ndfmc_mtd->priv = this;
-
-	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = (unsigned long)&tx4938_ndfmcptr->dtr;
-	this->IO_ADDR_W = (unsigned long)&tx4938_ndfmcptr->dtr;
-	this->hwcontrol = tx4938ndfmc_hwcontrol;
-	this->dev_ready = tx4938ndfmc_dev_ready;
-	this->calculate_ecc = tx4938ndfmc_calculate_ecc;
-	this->correct_data = nand_correct_data;
-	this->enable_hwecc = tx4938ndfmc_enable_hwecc;
-	this->eccmode = NAND_ECC_HW3_256;
-	this->chip_delay = 100;
-	this->read_byte = tx4938ndfmc_nand_read_byte;
-	this->write_byte = tx4938ndfmc_nand_write_byte;
-	this->cmdfunc = tx4938ndfmc_nand_command;
-	this->write_buf = tx4938ndfmc_nand_write_buf;
-	this->read_buf = tx4938ndfmc_nand_read_buf;
-	this->verify_buf = tx4938ndfmc_nand_verify_buf;
-
-	/* Scan to find existance of the device */
-	if (nand_scan (tx4938ndfmc_mtd, 1)) {
-		kfree (tx4938ndfmc_mtd);
-		return -ENXIO;
-	}
-
-	if (protected) {
-		printk(KERN_INFO "TX4938 NDFMC: write protected.\n");
-		tx4938ndfmc_mtd->flags &= ~(MTD_WRITEABLE | MTD_ERASEABLE);
-	}
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	{
-		int mtd_parts_nb = 0;
-		struct mtd_partition *mtd_parts = 0;
-		mtd_parts_nb = parse_cmdline_partitions(tx4938ndfmc_mtd, &mtd_parts, "tx4938ndfmc");
-		if (mtd_parts_nb > 0)
-			add_mtd_partitions(tx4938ndfmc_mtd, mtd_parts, mtd_parts_nb);
-		else
-			add_mtd_device(tx4938ndfmc_mtd);
-	}
-#else
-	add_mtd_partitions(tx4938ndfmc_mtd, partition_info, NUM_PARTITIONS );
-#endif
-
-	return 0;
-}
-module_init(tx4938ndfmc_init);
-
-/*
- * Clean up routine
- */
-static void __exit tx4938ndfmc_cleanup (void)
-{
-	/* Release resources, unregister device */
-	nand_release (tx4938ndfmc_mtd);
-
-	/* Free the MTD device structure */
-	kfree (tx4938ndfmc_mtd);
-}
-module_exit(tx4938ndfmc_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
-MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on TX4938 NDFMC");