diff options
author | Keith Packard <keithp@keithp.com> | 2009-04-07 16:16:42 -0700 |
---|---|---|
committer | Keith Packard <keithp@keithp.com> | 2009-06-18 15:54:07 -0700 |
commit | a4fc5ed69817c73e32571ad7837bb707f9890009 (patch) | |
tree | 1a54e8ca9917330359118c1709895c80d74c15af /drivers | |
parent | c31c4ba3437d98efa19710e30d694a1cfdf87aa5 (diff) | |
download | op-kernel-dev-a4fc5ed69817c73e32571ad7837bb707f9890009.zip op-kernel-dev-a4fc5ed69817c73e32571ad7837bb707f9890009.tar.gz |
drm/i915: Add Display Port support
Signed-off-by: Keith Packard <keithp@keithp.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/gpu/drm/i915/Makefile | 2 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/i915_drv.h | 12 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/i915_suspend.c | 34 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 107 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 1098 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_dp.h | 144 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_dp_i2c.c | 272 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_drv.h | 5 |
8 files changed, 1668 insertions, 6 deletions
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 51c5a05..30d6b99 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -13,6 +13,8 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \ intel_crt.o \ intel_lvds.o \ intel_bios.o \ + intel_dp.o \ + intel_dp_i2c.o \ intel_hdmi.o \ intel_sdvo.o \ intel_modes.o \ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 7a84f04..bb4c2d3 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -306,6 +306,17 @@ typedef struct drm_i915_private { u32 saveCURBPOS; u32 saveCURBBASE; u32 saveCURSIZE; + u32 saveDP_B; + u32 saveDP_C; + u32 saveDP_D; + u32 savePIPEA_GMCH_DATA_M; + u32 savePIPEB_GMCH_DATA_M; + u32 savePIPEA_GMCH_DATA_N; + u32 savePIPEB_GMCH_DATA_N; + u32 savePIPEA_DP_LINK_M; + u32 savePIPEB_DP_LINK_M; + u32 savePIPEA_DP_LINK_N; + u32 savePIPEB_DP_LINK_N; struct { struct drm_mm gtt_space; @@ -857,6 +868,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \ IS_I915GM(dev))) #define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev)) +#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev)) #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index a98e283..8d8e083 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -322,6 +322,20 @@ int i915_save_state(struct drm_device *dev) dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + /* Display Port state */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + dev_priv->saveDP_B = I915_READ(DP_B); + dev_priv->saveDP_C = I915_READ(DP_C); + dev_priv->saveDP_D = I915_READ(DP_D); + dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M); + dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M); + dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N); + dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N); + dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M); + dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M); + dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N); + dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N); + } /* FIXME: save TV & SDVO state */ /* FBC state */ @@ -404,7 +418,19 @@ int i915_restore_state(struct drm_device *dev) for (i = 0; i < 8; i++) I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]); } - + + /* Display port ratios (must be done before clock is set) */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M); + I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M); + I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N); + I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N); + I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M); + I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M); + I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N); + I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N); + } + /* Pipe & plane A info */ /* Prime the clock */ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { @@ -518,6 +544,12 @@ int i915_restore_state(struct drm_device *dev) I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + /* Display Port state */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + I915_WRITE(DP_B, dev_priv->saveDP_B); + I915_WRITE(DP_C, dev_priv->saveDP_C); + I915_WRITE(DP_D, dev_priv->saveDP_D); + } /* FIXME: restore TV & SDVO state */ /* FBC info */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3e1c781..5af55aa 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -29,6 +29,7 @@ #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" +#include "intel_dp.h" #include "drm_crtc_helper.h" @@ -135,10 +136,11 @@ struct intel_limit { #define INTEL_LIMIT_G4X_HDMI_DAC 5 #define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS 6 #define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS 7 -#define INTEL_LIMIT_IGD_SDVO_DAC 8 -#define INTEL_LIMIT_IGD_LVDS 9 -#define INTEL_LIMIT_IGDNG_SDVO_DAC 10 -#define INTEL_LIMIT_IGDNG_LVDS 11 +#define INTEL_LIMIT_G4X_DISPLAY_PORT 8 +#define INTEL_LIMIT_IGD_SDVO_DAC 9 +#define INTEL_LIMIT_IGD_LVDS 10 +#define INTEL_LIMIT_IGDNG_SDVO_DAC 11 +#define INTEL_LIMIT_IGDNG_LVDS 12 /*The parameter is for SDVO on G4x platform*/ #define G4X_DOT_SDVO_MIN 25000 @@ -218,6 +220,25 @@ struct intel_limit { #define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0 +/*The parameter is for DISPLAY PORT on G4x platform*/ +#define G4X_DOT_DISPLAY_PORT_MIN 161670 +#define G4X_DOT_DISPLAY_PORT_MAX 227000 +#define G4X_N_DISPLAY_PORT_MIN 1 +#define G4X_N_DISPLAY_PORT_MAX 2 +#define G4X_M_DISPLAY_PORT_MIN 97 +#define G4X_M_DISPLAY_PORT_MAX 108 +#define G4X_M1_DISPLAY_PORT_MIN 0x10 +#define G4X_M1_DISPLAY_PORT_MAX 0x12 +#define G4X_M2_DISPLAY_PORT_MIN 0x05 +#define G4X_M2_DISPLAY_PORT_MAX 0x06 +#define G4X_P_DISPLAY_PORT_MIN 10 +#define G4X_P_DISPLAY_PORT_MAX 20 +#define G4X_P1_DISPLAY_PORT_MIN 1 +#define G4X_P1_DISPLAY_PORT_MAX 2 +#define G4X_P2_DISPLAY_PORT_SLOW 10 +#define G4X_P2_DISPLAY_PORT_FAST 10 +#define G4X_P2_DISPLAY_PORT_LIMIT 0 + /* IGDNG */ /* as we calculate clock using (register_value + 2) for N/M1/M2, so here the range value for them is (actual_value-2). @@ -256,6 +277,10 @@ static bool intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); +static bool +intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *best_clock); + static const intel_limit_t intel_limits[] = { { /* INTEL_LIMIT_I8XX_DVO_DAC */ .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, @@ -389,6 +414,28 @@ static const intel_limit_t intel_limits[] = { }, .find_pll = intel_g4x_find_best_PLL, }, + { /* INTEL_LIMIT_G4X_DISPLAY_PORT */ + .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN, + .max = G4X_DOT_DISPLAY_PORT_MAX }, + .vco = { .min = G4X_VCO_MIN, + .max = G4X_VCO_MAX}, + .n = { .min = G4X_N_DISPLAY_PORT_MIN, + .max = G4X_N_DISPLAY_PORT_MAX }, + .m = { .min = G4X_M_DISPLAY_PORT_MIN, + .max = G4X_M_DISPLAY_PORT_MAX }, + .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN, + .max = G4X_M1_DISPLAY_PORT_MAX }, + .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN, + .max = G4X_M2_DISPLAY_PORT_MAX }, + .p = { .min = G4X_P_DISPLAY_PORT_MIN, + .max = G4X_P_DISPLAY_PORT_MAX }, + .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN, + .max = G4X_P1_DISPLAY_PORT_MAX}, + .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT, + .p2_slow = G4X_P2_DISPLAY_PORT_SLOW, + .p2_fast = G4X_P2_DISPLAY_PORT_FAST }, + .find_pll = intel_find_pll_g4x_dp, + }, { /* INTEL_LIMIT_IGD_SDVO */ .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX}, .vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX }, @@ -478,6 +525,8 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC]; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { limit = &intel_limits[INTEL_LIMIT_G4X_SDVO]; + } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) { + limit = &intel_limits[INTEL_LIMIT_G4X_DISPLAY_PORT]; } else /* The option is for other outputs */ limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; @@ -764,6 +813,35 @@ out: return found; } +/* DisplayPort has only two frequencies, 162MHz and 270MHz */ +static bool +intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *best_clock) +{ + intel_clock_t clock; + if (target < 200000) { + clock.dot = 161670; + clock.p = 20; + clock.p1 = 2; + clock.p2 = 10; + clock.n = 0x01; + clock.m = 97; + clock.m1 = 0x10; + clock.m2 = 0x05; + } else { + clock.dot = 270000; + clock.p = 10; + clock.p1 = 1; + clock.p2 = 10; + clock.n = 0x02; + clock.m = 108; + clock.m1 = 0x12; + clock.m2 = 0x06; + } + memcpy(best_clock, &clock, sizeof(intel_clock_t)); + return true; +} + void intel_wait_for_vblank(struct drm_device *dev) { @@ -1541,7 +1619,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, intel_clock_t clock; u32 dpll = 0, fp = 0, dspcntr, pipeconf; bool ok, is_sdvo = false, is_dvo = false; - bool is_crt = false, is_lvds = false, is_tv = false; + bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; const intel_limit_t *limit; @@ -1585,6 +1663,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, case INTEL_OUTPUT_ANALOG: is_crt = true; break; + case INTEL_OUTPUT_DISPLAYPORT: + is_dp = true; + break; } num_outputs++; @@ -1600,6 +1681,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } else { refclk = 48000; } + /* * Returns a set of divisors for the desired target clock with the given @@ -1662,6 +1744,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, else if (IS_IGDNG(dev)) dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; } + if (is_dp) + dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ if (IS_IGD(dev)) @@ -1809,6 +1893,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(lvds_reg, lvds); I915_READ(lvds_reg); } + if (is_dp) + intel_dp_set_m_n(crtc, mode, adjusted_mode); I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll); @@ -2475,6 +2561,8 @@ static void intel_setup_outputs(struct drm_device *dev) found = intel_sdvo_init(dev, SDVOB); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) intel_hdmi_init(dev, SDVOB); + if (!found && SUPPORTS_INTEGRATED_DP(dev)) + intel_dp_init(dev, DP_B); } /* Before G4X SDVOC doesn't have its own detect register */ @@ -2487,7 +2575,11 @@ static void intel_setup_outputs(struct drm_device *dev) found = intel_sdvo_init(dev, SDVOC); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) intel_hdmi_init(dev, SDVOC); + if (!found && SUPPORTS_INTEGRATED_DP(dev)) + intel_dp_init(dev, DP_C); } + if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED)) + intel_dp_init(dev, DP_D); } else intel_dvo_init(dev); @@ -2530,6 +2622,11 @@ static void intel_setup_outputs(struct drm_device *dev) (1 << 1)); clone_mask = (1 << INTEL_OUTPUT_TVOUT); break; + case INTEL_OUTPUT_DISPLAYPORT: + crtc_mask = ((1 << 0) | + (1 << 1)); + clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT); + break; } encoder->possible_crtcs = crtc_mask; encoder->possible_clones = intel_connector_clones(dev, clone_mask); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c new file mode 100644 index 0000000..c57cdab --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -0,0 +1,1098 @@ +/* + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Keith Packard <keithp@keithp.com> + * + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include "intel_dp.h" + +#define DP_LINK_STATUS_SIZE 6 +#define DP_LINK_CHECK_TIMEOUT (10 * 1000) + +#define DP_LINK_CONFIGURATION_SIZE 9 + +struct intel_dp_priv { + uint32_t output_reg; + uint32_t DP; + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]; + uint32_t save_DP; + uint8_t save_link_configuration[DP_LINK_CONFIGURATION_SIZE]; + bool has_audio; + uint8_t link_bw; + uint8_t lane_count; + uint8_t dpcd[4]; + struct intel_output *intel_output; + struct i2c_adapter adapter; + struct i2c_algo_dp_aux_data algo; +}; + +static void +intel_dp_link_train(struct intel_output *intel_output, uint32_t DP, + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]); + +static void +intel_dp_link_down(struct intel_output *intel_output, uint32_t DP); + +static int +intel_dp_max_lane_count(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int max_lane_count = 4; + + if (dp_priv->dpcd[0] >= 0x11) { + max_lane_count = dp_priv->dpcd[2] & 0x1f; + switch (max_lane_count) { + case 1: case 2: case 4: + break; + default: + max_lane_count = 4; + } + } + return max_lane_count; +} + +static int +intel_dp_max_link_bw(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int max_link_bw = dp_priv->dpcd[1]; + + switch (max_link_bw) { + case DP_LINK_BW_1_62: + case DP_LINK_BW_2_7: + break; + default: + max_link_bw = DP_LINK_BW_1_62; + break; + } + return max_link_bw; +} + +static int +intel_dp_link_clock(uint8_t link_bw) +{ + if (link_bw == DP_LINK_BW_2_7) + return 270000; + else + return 162000; +} + +/* I think this is a fiction */ +static int +intel_dp_link_required(int pixel_clock) +{ + return pixel_clock * 3; +} + +static int +intel_dp_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct intel_output *intel_output = to_intel_output(connector); + int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output)); + int max_lanes = intel_dp_max_lane_count(intel_output); + + if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes) + return MODE_CLOCK_HIGH; + + if (mode->clock < 10000) + return MODE_CLOCK_LOW; + + return MODE_OK; +} + +static uint32_t +pack_aux(uint8_t *src, int src_bytes) +{ + int i; + uint32_t v = 0; + + if (src_bytes > 4) + src_bytes = 4; + for (i = 0; i < src_bytes; i++) + v |= ((uint32_t) src[i]) << ((3-i) * 8); + return v; +} + +static void +unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) +{ + int i; + if (dst_bytes > 4) + dst_bytes = 4; + for (i = 0; i < dst_bytes; i++) + dst[i] = src >> ((3-i) * 8); +} + +static int +intel_dp_aux_ch(struct intel_output *intel_output, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_size) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint32_t output_reg = dp_priv->output_reg; + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t ch_ctl = output_reg + 0x10; + uint32_t ch_data = ch_ctl + 4; + int i; + int recv_bytes; + uint32_t ctl; + uint32_t status; + + /* Load the send data into the aux channel data registers */ + for (i = 0; i < send_bytes; i += 4) { + uint32_t d = pack_aux(send + i, send_bytes - i);; + + I915_WRITE(ch_data + i, d); + } + + /* The clock divider is based off the hrawclk, + * and would like to run at 2MHz. The 133 below assumes + * a 266MHz hrawclk; need to figure out how we're supposed + * to know what hrawclk is... + */ + ctl = (DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_TIME_OUT_1600us | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (133 << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR); + + /* Send the command and wait for it to complete */ + I915_WRITE(ch_ctl, ctl); + (void) I915_READ(ch_ctl); + for (;;) { + udelay(100); + status = I915_READ(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + } + + /* Clear done status and any errors */ + I915_WRITE(ch_ctl, (ctl | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR)); + (void) I915_READ(ch_ctl); + + if ((status & DP_AUX_CH_CTL_DONE) == 0) { + printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status); + return -1; + } + + /* Check for timeout or receive error. + * Timeouts occur when the sink is not connected + */ + if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR | DP_AUX_CH_CTL_RECEIVE_ERROR)) { + printk(KERN_ERR "dp_aux_ch error status 0x%08x\n", status); + return -1; + } + + /* Unload any bytes sent back from the other side */ + recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> + DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); + + if (recv_bytes > recv_size) + recv_bytes = recv_size; + + for (i = 0; i < recv_bytes; i += 4) { + uint32_t d = I915_READ(ch_data + i); + + unpack_aux(d, recv + i, recv_bytes - i); + } + + return recv_bytes; +} + +/* Write data to the aux channel in native mode */ +static int +intel_dp_aux_native_write(struct intel_output *intel_output, + uint16_t address, uint8_t *send, int send_bytes) +{ + int ret; + uint8_t msg[20]; + int msg_bytes; + uint8_t ack; + + if (send_bytes > 16) + return -1; + msg[0] = AUX_NATIVE_WRITE << 4; + msg[1] = address >> 8; + msg[2] = address; + msg[3] = send_bytes - 1; + memcpy(&msg[4], send, send_bytes); + msg_bytes = send_bytes + 4; + for (;;) { + ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1); + if (ret < 0) + return ret; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) + break; + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -1; + } + return send_bytes; +} + +/* Write a single byte to the aux channel in native mode */ +static int +intel_dp_aux_native_write_1(struct intel_output *intel_output, + uint16_t address, uint8_t byte) +{ + return intel_dp_aux_native_write(intel_output, address, &byte, 1); +} + +/* read bytes from a native aux channel */ +static int +intel_dp_aux_native_read(struct intel_output *intel_output, + uint16_t address, uint8_t *recv, int recv_bytes) +{ + uint8_t msg[4]; + int msg_bytes; + uint8_t reply[20]; + int reply_bytes; + uint8_t ack; + int ret; + + msg[0] = AUX_NATIVE_READ << 4; + msg[1] = address >> 8; + msg[2] = address & 0xff; + msg[3] = recv_bytes - 1; + + msg_bytes = 4; + reply_bytes = recv_bytes + 1; + + for (;;) { + ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, + reply, reply_bytes); + if (ret <= 0) + return ret; + ack = reply[0]; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) { + memcpy(recv, reply + 1, ret - 1); + return ret - 1; + } + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -1; + } +} + +static int +intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_bytes) +{ + struct intel_dp_priv *dp_priv = container_of(adapter, + struct intel_dp_priv, + adapter); + struct intel_output *intel_output = dp_priv->intel_output; + + return intel_dp_aux_ch(intel_output, + send, send_bytes, recv, recv_bytes); +} + +static int +intel_dp_i2c_init(struct intel_output *intel_output, const char *name) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + DRM_ERROR("i2c_init %s\n", name); + dp_priv->algo.running = false; + dp_priv->algo.address = 0; + dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch; + + memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter)); + dp_priv->adapter.owner = THIS_MODULE; + dp_priv->adapter.class = I2C_CLASS_DDC; + strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1); + dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0'; + dp_priv->adapter.algo_data = &dp_priv->algo; + dp_priv->adapter.dev.parent = &intel_output->base.kdev; + + return i2c_dp_aux_add_bus(&dp_priv->adapter); +} + +static bool +intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int lane_count, clock; + int max_lane_count = intel_dp_max_lane_count(intel_output); + int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0; + static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; + + for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { + for (clock = 0; clock <= max_clock; clock++) { + int link_avail = intel_dp_link_clock(bws[clock]) * lane_count; + + if (intel_dp_link_required(mode->clock) <= link_avail) { + dp_priv->link_bw = bws[clock]; + dp_priv->lane_count = lane_count; + adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw); + printk(KERN_ERR "link bw %02x lane count %d clock %d\n", + dp_priv->link_bw, dp_priv->lane_count, + adjusted_mode->clock); + return true; + } + } + } + return false; +} + +struct intel_dp_m_n { + uint32_t tu; + uint32_t gmch_m; + uint32_t gmch_n; + uint32_t link_m; + uint32_t link_n; +}; + +static void +intel_reduce_ratio(uint32_t *num, uint32_t *den) +{ + while (*num > 0xffffff || *den > 0xffffff) { + *num >>= 1; + *den >>= 1; + } +} + +static void +intel_dp_compute_m_n(int bytes_per_pixel, + int nlanes, + int pixel_clock, + int link_clock, + struct intel_dp_m_n *m_n) +{ + m_n->tu = 64; + m_n->gmch_m = pixel_clock * bytes_per_pixel; + m_n->gmch_n = link_clock * nlanes; + intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); + m_n->link_m = pixel_clock; + m_n->link_n = link_clock; + intel_reduce_ratio(&m_n->link_m, &m_n->link_n); +} + +void +intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int lane_count = 4; + struct intel_dp_m_n m_n; + + /* + * Find the lane count in the intel_output private + */ + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + if (!connector->encoder || connector->encoder->crtc != crtc) + continue; + + if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) { + lane_count = dp_priv->lane_count; + break; + } + } + + /* + * Compute the GMCH and Link ratios. The '3' here is + * the number of bytes_per_pixel post-LUT, which we always + * set up for 8-bits of R/G/B, or 3 bytes total. + */ + intel_dp_compute_m_n(3, lane_count, + mode->clock, adjusted_mode->clock, &m_n); + + if (intel_crtc->pipe == 0) { + I915_WRITE(PIPEA_GMCH_DATA_M, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(PIPEA_GMCH_DATA_N, + m_n.gmch_n); + I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m); + I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n); + } else { + I915_WRITE(PIPEB_GMCH_DATA_M, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(PIPEB_GMCH_DATA_N, + m_n.gmch_n); + I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m); + I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n); + } +} + +static void +intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + struct drm_crtc *crtc = intel_output->enc.crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + dp_priv->DP = (DP_LINK_TRAIN_OFF | + DP_VOLTAGE_0_4 | + DP_PRE_EMPHASIS_0 | + DP_SYNC_VS_HIGH | + DP_SYNC_HS_HIGH); + + switch (dp_priv->lane_count) { + case 1: + dp_priv->DP |= DP_PORT_WIDTH_1; + break; + case 2: + dp_priv->DP |= DP_PORT_WIDTH_2; + break; + case 4: + dp_priv->DP |= DP_PORT_WIDTH_4; + break; + } + if (dp_priv->has_audio) + dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE; + + memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); + dp_priv->link_configuration[0] = dp_priv->link_bw; + dp_priv->link_configuration[1] = dp_priv->lane_count; + + /* + * Check for DPCD version > 1.1, + * enable enahanced frame stuff in that case + */ + if (dp_priv->dpcd[0] >= 0x11) { + dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + dp_priv->DP |= DP_ENHANCED_FRAMING; + } + + if (intel_crtc->pipe == 1) + dp_priv->DP |= DP_PIPEB_SELECT; +} + + +static void +intel_dp_dpms(struct drm_encoder *encoder, int mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dp_reg = I915_READ(dp_priv->output_reg); + + if (mode != DRM_MODE_DPMS_ON) { + if (dp_reg & DP_PORT_EN) + intel_dp_link_down(intel_output, dp_priv->DP); + } else { + if (!(dp_reg & DP_PORT_EN)) + intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); + } +} + +/* + * Fetch AUX CH registers 0x202 - 0x207 which contain + * link status information + */ +static bool +intel_dp_get_link_status(struct intel_output *intel_output, + uint8_t link_status[DP_LINK_STATUS_SIZE]) +{ + int ret; + + ret = intel_dp_aux_native_read(intel_output, + DP_LANE0_1_STATUS, + link_status, DP_LINK_STATUS_SIZE); + if (ret != DP_LINK_STATUS_SIZE) + return false; + return true; +} + +static uint8_t +intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int r) +{ + return link_status[r - DP_LANE0_1_STATUS]; +} + +static void +intel_dp_save(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + dp_priv->save_DP = I915_READ(dp_priv->output_reg); + intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET, + dp_priv->save_link_configuration, + sizeof (dp_priv->save_link_configuration)); +} + +static uint8_t +intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : + DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); + uint8_t l = intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; +} + +static uint8_t +intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : + DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); + uint8_t l = intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; +} + + +#if 0 +static char *voltage_names[] = { + "0.4V", "0.6V", "0.8V", "1.2V" +}; +static char *pre_emph_names[] = { + "0dB", "3.5dB", "6dB", "9.5dB" +}; +static char *link_train_names[] = { + "pattern 1", "pattern 2", "idle", "off" +}; +#endif + +/* + * These are source-specific values; current Intel hardware supports + * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB + */ +#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 + +static uint8_t +intel_dp_pre_emphasis_max(uint8_t voltage_swing) +{ + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } +} + +static void +intel_get_adjust_train(struct intel_output *intel_output, + uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane_count, + uint8_t train_set[4]) +{ + uint8_t v = 0; + uint8_t p = 0; + int lane; + + for (lane = 0; lane < lane_count; lane++) { + uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane); + uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane); + + if (this_v > v) + v = this_v; + if (this_p > p) + p = this_p; + } + + if (v >= I830_DP_VOLTAGE_MAX) + v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + + if (p >= intel_dp_pre_emphasis_max(v)) + p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + + for (lane = 0; lane < 4; lane++) + train_set[lane] = v | p; +} + +static uint32_t +intel_dp_signal_levels(uint8_t train_set, int lane_count) +{ + uint32_t signal_levels = 0; + + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + default: + signal_levels |= DP_VOLTAGE_0_4; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + signal_levels |= DP_VOLTAGE_0_6; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + signal_levels |= DP_VOLTAGE_0_8; + break; + case DP_TRAIN_VOLTAGE_SWING_1200: + signal_levels |= DP_VOLTAGE_1_2; + break; + } + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPHASIS_0: + default: + signal_levels |= DP_PRE_EMPHASIS_0; + break; + case DP_TRAIN_PRE_EMPHASIS_3_5: + signal_levels |= DP_PRE_EMPHASIS_3_5; + break; + case DP_TRAIN_PRE_EMPHASIS_6: + signal_levels |= DP_PRE_EMPHASIS_6; + break; + case DP_TRAIN_PRE_EMPHASIS_9_5: + signal_levels |= DP_PRE_EMPHASIS_9_5; + break; + } + return signal_levels; +} + +static uint8_t +intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_LANE0_1_STATUS + (lane >> 1); + int s = (lane & 1) * 4; + uint8_t l = intel_dp_link_status(link_status, i); + + return (l >> s) & 0xf; +} + +/* Check for clock recovery is done on all channels */ +static bool +intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) +{ + int lane; + uint8_t lane_status; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = intel_get_lane_status(link_status, lane); + if ((lane_status & DP_LANE_CR_DONE) == 0) + return false; + } + return true; +} + +/* Check to see if channel eq is done on all channels */ +#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\ + DP_LANE_CHANNEL_EQ_DONE|\ + DP_LANE_SYMBOL_LOCKED) +static bool +intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) +{ + uint8_t lane_align; + uint8_t lane_status; + int lane; + + lane_align = intel_dp_link_status(link_status, + DP_LANE_ALIGN_STATUS_UPDATED); + if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) + return false; + for (lane = 0; lane < lane_count; lane++) { + lane_status = intel_get_lane_status(link_status, lane); + if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) + return false; + } + return true; +} + +static bool +intel_dp_set_link_train(struct intel_output *intel_output, + uint32_t dp_reg_value, + uint8_t dp_train_pat, + uint8_t train_set[4], + bool first) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int ret; + + I915_WRITE(dp_priv->output_reg, dp_reg_value); + POSTING_READ(dp_priv->output_reg); + if (first) + intel_wait_for_vblank(dev); + + intel_dp_aux_native_write_1(intel_output, + DP_TRAINING_PATTERN_SET, + dp_train_pat); + + ret = intel_dp_aux_native_write(intel_output, + DP_TRAINING_LANE0_SET, train_set, 4); + if (ret != 4) + return false; + + return true; +} + +static void +intel_dp_link_train(struct intel_output *intel_output, uint32_t DP, + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint8_t train_set[4]; + uint8_t link_status[DP_LINK_STATUS_SIZE]; + int i; + uint8_t voltage; + bool clock_recovery = false; + bool channel_eq = false; + bool first = true; + int tries; + + /* Write the link configuration data */ + intel_dp_aux_native_write(intel_output, 0x100, + link_configuration, DP_LINK_CONFIGURATION_SIZE); + + DP |= DP_PORT_EN; + DP &= ~DP_LINK_TRAIN_MASK; + memset(train_set, 0, 4); + voltage = 0xff; + tries = 0; + clock_recovery = false; + for (;;) { + /* Use train_set[0] to set the voltage and pre emphasis values */ + uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count); + DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; + + if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1, + DP_TRAINING_PATTERN_1, train_set, first)) + break; + first = false; + /* Set training pattern 1 */ + + udelay(100); + if (!intel_dp_get_link_status(intel_output, link_status)) + break; + + if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) { + clock_recovery = true; + break; + } + + /* Check to see if we've tried the max voltage */ + for (i = 0; i < dp_priv->lane_count; i++) + if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) + break; + if (i == dp_priv->lane_count) + break; + + /* Check to see if we've tried the same voltage 5 times */ + if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { + ++tries; + if (tries == 5) + break; + } else + tries = 0; + voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + + /* Compute new train_set as requested by target */ + intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set); + } + + /* channel equalization */ + tries = 0; + channel_eq = false; + for (;;) { + /* Use train_set[0] to set the voltage and pre emphasis values */ + uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count); + DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; + + /* channel eq pattern */ + if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2, + DP_TRAINING_PATTERN_2, train_set, + false)) + break; + + udelay(400); + if (!intel_dp_get_link_status(intel_output, link_status)) + break; + + if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) { + channel_eq = true; + break; + } + + /* Try 5 times */ + if (tries > 5) + break; + + /* Compute new train_set as requested by target */ + intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set); + ++tries; + } + + I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF); + POSTING_READ(dp_priv->output_reg); + intel_dp_aux_native_write_1(intel_output, + DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE); +} + +static void +intel_dp_link_down(struct intel_output *intel_output, uint32_t DP) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN); + POSTING_READ(dp_priv->output_reg); +} + +static void +intel_dp_restore(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + if (dp_priv->save_DP & DP_PORT_EN) + intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration); + else + intel_dp_link_down(intel_output, dp_priv->save_DP); +} + +#if 0 +/* + * According to DP spec + * 5.1.2: + * 1. Read DPCD + * 2. Configure link according to Receiver Capabilities + * 3. Use Link Training from 2.5.3.3 and 3.5.1.3 + * 4. Check link status on receipt of hot-plug interrupt + */ + +static void +intel_dp_check_link_status(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint8_t link_status[DP_LINK_STATUS_SIZE]; + + if (!intel_output->enc.crtc) + return; + + if (!intel_dp_get_link_status(intel_output, link_status)) { + intel_dp_link_down(intel_output, dp_priv->DP); + return; + } + + if (!intel_channel_eq_ok(link_status, dp_priv->lane_count)) + intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); +} +#endif + +/** + * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection. + * + * \return true if DP port is connected. + * \return false if DP port is disconnected. + */ +static enum drm_connector_status +intel_dp_detect(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint32_t temp, bit; + enum drm_connector_status status; + + dp_priv->has_audio = false; + + temp = I915_READ(PORT_HOTPLUG_EN); + + I915_WRITE(PORT_HOTPLUG_EN, + temp | + DPB_HOTPLUG_INT_EN | + DPC_HOTPLUG_INT_EN | + DPD_HOTPLUG_INT_EN); + + POSTING_READ(PORT_HOTPLUG_EN); + + switch (dp_priv->output_reg) { + case DP_B: + bit = DPB_HOTPLUG_INT_STATUS; + break; + case DP_C: + bit = DPC_HOTPLUG_INT_STATUS; + break; + case DP_D: + bit = DPD_HOTPLUG_INT_STATUS; + break; + default: + return connector_status_unknown; + } + + temp = I915_READ(PORT_HOTPLUG_STAT); + + if ((temp & bit) == 0) + return connector_status_disconnected; + + status = connector_status_disconnected; + if (intel_dp_aux_native_read(intel_output, + 0x000, dp_priv->dpcd, + sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd)) + { + if (dp_priv->dpcd[0] != 0) + status = connector_status_connected; + } + return status; +} + +static int intel_dp_get_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + /* We should parse the EDID data and find out if it has an audio sink + */ + + return intel_ddc_get_modes(intel_output); +} + +static void +intel_dp_destroy (struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->i2c_bus) + intel_i2c_destroy(intel_output->i2c_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(intel_output); +} + +static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = { + .dpms = intel_dp_dpms, + .mode_fixup = intel_dp_mode_fixup, + .prepare = intel_encoder_prepare, + .mode_set = intel_dp_mode_set, + .commit = intel_encoder_commit, +}; + +static const struct drm_connector_funcs intel_dp_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .save = intel_dp_save, + .restore = intel_dp_restore, + .detect = intel_dp_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = intel_dp_destroy, +}; + +static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { + .get_modes = intel_dp_get_modes, + .mode_valid = intel_dp_mode_valid, + .best_encoder = intel_best_encoder, +}; + +static void intel_dp_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_dp_enc_funcs = { + .destroy = intel_dp_enc_destroy, +}; + +void +intel_dp_init(struct drm_device *dev, int output_reg) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_connector *connector; + struct intel_output *intel_output; + struct intel_dp_priv *dp_priv; + + intel_output = kcalloc(sizeof(struct intel_output) + + sizeof(struct intel_dp_priv), 1, GFP_KERNEL); + if (!intel_output) + return; + + dp_priv = (struct intel_dp_priv *)(intel_output + 1); + + connector = &intel_output->base; + drm_connector_init(dev, connector, &intel_dp_connector_funcs, + DRM_MODE_CONNECTOR_DisplayPort); + drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); + + intel_output->type = INTEL_OUTPUT_DISPLAYPORT; + + connector->interlace_allowed = true; + connector->doublescan_allowed = 0; + + dp_priv->intel_output = intel_output; + dp_priv->output_reg = output_reg; + dp_priv->has_audio = false; + intel_output->dev_priv = dp_priv; + + drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs, + DRM_MODE_ENCODER_TMDS); + drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs); + + drm_mode_connector_attach_encoder(&intel_output->base, + &intel_output->enc); + drm_sysfs_connector_add(connector); + + /* Set up the DDC bus. */ + intel_dp_i2c_init(intel_output, + (output_reg == DP_B) ? "DPDDC-B" : + (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D"); + intel_output->ddc_bus = &dp_priv->adapter; + + /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written + * 0xd. Failure to do so will result in spurious interrupts being + * generated on the port when a cable is not attached. + */ + if (IS_G4X(dev) && !IS_GM45(dev)) { + u32 temp = I915_READ(PEG_BAND_GAP_DATA); + I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd); + } +} diff --git a/drivers/gpu/drm/i915/intel_dp.h b/drivers/gpu/drm/i915/intel_dp.h new file mode 100644 index 0000000..2b38054 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp.h @@ -0,0 +1,144 @@ +/* + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _INTEL_DP_H_ +#define _INTEL_DP_H_ + +/* From the VESA DisplayPort spec */ + +#define AUX_NATIVE_WRITE 0x8 +#define AUX_NATIVE_READ 0x9 +#define AUX_I2C_WRITE 0x0 +#define AUX_I2C_READ 0x1 +#define AUX_I2C_STATUS 0x2 +#define AUX_I2C_MOT 0x4 + +#define AUX_NATIVE_REPLY_ACK (0x0 << 4) +#define AUX_NATIVE_REPLY_NACK (0x1 << 4) +#define AUX_NATIVE_REPLY_DEFER (0x2 << 4) +#define AUX_NATIVE_REPLY_MASK (0x3 << 4) + +#define AUX_I2C_REPLY_ACK (0x0 << 6) +#define AUX_I2C_REPLY_NACK (0x1 << 6) +#define AUX_I2C_REPLY_DEFER (0x2 << 6) +#define AUX_I2C_REPLY_MASK (0x3 << 6) + +/* AUX CH addresses */ +#define DP_LINK_BW_SET 0x100 +# define DP_LINK_BW_1_62 0x06 +# define DP_LINK_BW_2_7 0x0a + +#define DP_LANE_COUNT_SET 0x101 +# define DP_LANE_COUNT_MASK 0x0f +# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) + +#define DP_TRAINING_PATTERN_SET 0x102 + +# define DP_TRAINING_PATTERN_DISABLE 0 +# define DP_TRAINING_PATTERN_1 1 +# define DP_TRAINING_PATTERN_2 2 +# define DP_TRAINING_PATTERN_MASK 0x3 + +# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2) +# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2) +# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2) +# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2) +# define DP_LINK_QUAL_PATTERN_MASK (3 << 2) + +# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) +# define DP_LINK_SCRAMBLING_DISABLE (1 << 5) + +# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) +# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) +# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) +# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) + +#define DP_TRAINING_LANE0_SET 0x103 +#define DP_TRAINING_LANE1_SET 0x104 +#define DP_TRAINING_LANE2_SET 0x105 +#define DP_TRAINING_LANE3_SET 0x106 + +# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 +# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 +# define DP_TRAIN_MAX_SWING_REACHED (1 << 2) +# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0) +# define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0) +# define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0) +# define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0) + +# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) +# define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3) +# define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3) +# define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3) +# define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3) + +# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 +# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) + +#define DP_DOWNSPREAD_CTRL 0x107 +# define DP_SPREAD_AMP_0_5 (1 << 4) + +#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 +# define DP_SET_ANSI_8B10B (1 << 0) + +#define DP_LANE0_1_STATUS 0x202 +#define DP_LANE2_3_STATUS 0x203 + +# define DP_LANE_CR_DONE (1 << 0) +# define DP_LANE_CHANNEL_EQ_DONE (1 << 1) +# define DP_LANE_SYMBOL_LOCKED (1 << 2) + +#define DP_LANE_ALIGN_STATUS_UPDATED 0x204 + +#define DP_INTERLANE_ALIGN_DONE (1 << 0) +#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DP_LINK_STATUS_UPDATED (1 << 7) + +#define DP_SINK_STATUS 0x205 + +#define DP_RECEIVE_PORT_0_STATUS (1 << 0) +#define DP_RECEIVE_PORT_1_STATUS (1 << 1) + +#define DP_ADJUST_REQUEST_LANE0_1 0x206 +#define DP_ADJUST_REQUEST_LANE2_3 0x207 + +#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 +#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 +#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c +#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 +#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 +#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 +#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 +#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 + +struct i2c_algo_dp_aux_data { + bool running; + u16 address; + int (*aux_ch) (struct i2c_adapter *adapter, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_bytes); +}; + +int +i2c_dp_aux_add_bus(struct i2c_adapter *adapter); + +#endif /* _INTEL_DP_H_ */ diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c new file mode 100644 index 0000000..4e60f14 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp_i2c.c @@ -0,0 +1,272 @@ +/* + * Copyright © 2009 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/i2c.h> +#include "intel_dp.h" + +/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ + +#define MODE_I2C_START 1 +#define MODE_I2C_WRITE 2 +#define MODE_I2C_READ 4 +#define MODE_I2C_STOP 8 + +static int +i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, + uint8_t write_byte, uint8_t *read_byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + uint16_t address = algo_data->address; + uint8_t msg[5]; + uint8_t reply[2]; + int msg_bytes; + int reply_bytes; + int ret; + + /* Set up the command byte */ + if (mode & MODE_I2C_READ) + msg[0] = AUX_I2C_READ << 4; + else + msg[0] = AUX_I2C_WRITE << 4; + + if (!(mode & MODE_I2C_STOP)) + msg[0] |= AUX_I2C_MOT << 4; + + msg[1] = address >> 8; + msg[2] = address; + + switch (mode) { + case MODE_I2C_WRITE: + msg[3] = 0; + msg[4] = write_byte; + msg_bytes = 5; + reply_bytes = 1; + break; + case MODE_I2C_READ: + msg[3] = 0; + msg_bytes = 4; + reply_bytes = 2; + break; + default: + msg_bytes = 3; + reply_bytes = 1; + break; + } + + for (;;) { + ret = (*algo_data->aux_ch)(adapter, + msg, msg_bytes, + reply, reply_bytes); + if (ret < 0) { + printk(KERN_ERR "aux_ch failed %d\n", ret); + return ret; + } + switch (reply[0] & AUX_I2C_REPLY_MASK) { + case AUX_I2C_REPLY_ACK: + if (mode == MODE_I2C_READ) { + *read_byte = reply[1]; + } + return reply_bytes - 1; + case AUX_I2C_REPLY_NACK: + printk(KERN_ERR "aux_ch nack\n"); + return -EREMOTEIO; + case AUX_I2C_REPLY_DEFER: + printk(KERN_ERR "aux_ch defer\n"); + udelay(100); + break; + default: + printk(KERN_ERR "aux_ch invalid reply 0x%02x\n", reply[0]); + return -EREMOTEIO; + } + } +} + +/* + * I2C over AUX CH + */ + +/* + * Send the address. If the I2C link is running, this 'restarts' + * the connection with the new address, this is used for doing + * a write followed by a read (as needed for DDC) + */ +static int +i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_START; + int ret; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + algo_data->address = address; + algo_data->running = true; + ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + return ret; +} + +/* + * Stop the I2C transaction. This closes out the link, sending + * a bare address packet with the MOT bit turned off + */ +static void +i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_STOP; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + if (algo_data->running) { + (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + algo_data->running = false; + } +} + +/* + * Write a single byte to the current I2C address, the + * the I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL); + return ret; +} + +/* + * Read a single byte from the current I2C address, the + * I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret); + return ret; +} + +static int +i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + int ret = 0; + bool reading = false; + int m; + int b; + + for (m = 0; m < num; m++) { + u16 len = msgs[m].len; + u8 *buf = msgs[m].buf; + reading = (msgs[m].flags & I2C_M_RD) != 0; + ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading); + if (ret < 0) + break; + if (reading) { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]); + if (ret < 0) + break; + } + } else { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]); + if (ret < 0) + break; + } + } + if (ret < 0) + break; + } + if (ret >= 0) + ret = num; + i2c_algo_dp_aux_stop(adapter, reading); + printk(KERN_ERR "dp_aux_xfer return %d\n", ret); + return ret; +} + +static u32 +i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | + I2C_FUNC_10BIT_ADDR; +} + +static const struct i2c_algorithm i2c_dp_aux_algo = { + .master_xfer = i2c_algo_dp_aux_xfer, + .functionality = i2c_algo_dp_aux_functionality, +}; + +static void +i2c_dp_aux_reset_bus(struct i2c_adapter *adapter) +{ + (void) i2c_algo_dp_aux_address(adapter, 0, false); + (void) i2c_algo_dp_aux_stop(adapter, false); + +} + +static int +i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter) +{ + adapter->algo = &i2c_dp_aux_algo; + adapter->retries = 3; + i2c_dp_aux_reset_bus(adapter); + return 0; +} + +int +i2c_dp_aux_add_bus(struct i2c_adapter *adapter) +{ + int error; + + error = i2c_dp_aux_prepare_bus(adapter); + if (error) + return error; + error = i2c_add_adapter(adapter); + return error; +} +EXPORT_SYMBOL(i2c_dp_aux_add_bus); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index c585879..004541c 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -54,6 +54,7 @@ #define INTEL_OUTPUT_LVDS 4 #define INTEL_OUTPUT_TVOUT 5 #define INTEL_OUTPUT_HDMI 6 +#define INTEL_OUTPUT_DISPLAYPORT 7 #define INTEL_DVO_CHIP_NONE 0 #define INTEL_DVO_CHIP_LVDS 1 @@ -116,6 +117,10 @@ extern bool intel_sdvo_init(struct drm_device *dev, int output_device); extern void intel_dvo_init(struct drm_device *dev); extern void intel_tv_init(struct drm_device *dev); extern void intel_lvds_init(struct drm_device *dev); +extern void intel_dp_init(struct drm_device *dev, int dp_reg); +void +intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); extern void intel_crtc_load_lut(struct drm_crtc *crtc); extern void intel_encoder_prepare (struct drm_encoder *encoder); |