treewide: Fix typos in printk

This patch fix multiple spelling typos found in
various part of kernel.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

9 files changed, 11 insertions, 11 deletions

diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c
index b62e2f5..cf7b7d4 100644
--- a/drivers/firmware/efi/libstub/fdt.c
+++ b/drivers/firmware/efi/libstub/fdt.c
@@ -253,7 +253,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table,
 			sys_table->boottime->free_pool(memory_map);
 			new_fdt_size += EFI_PAGE_SIZE;
 		} else {
-			pr_efi_err(sys_table, "Unable to constuct new device tree.\n");
+			pr_efi_err(sys_table, "Unable to construct new device tree.\n");
 			goto fail_free_mmap;
 		}
 	}
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index debc39d..9a389a0 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -449,7 +449,7 @@ static void act_open_req_arp_failure(void *handle, struct sk_buff *skb)
 {
 	struct c4iw_ep *ep = handle;
 
-	printk(KERN_ERR MOD "ARP failure duing connect\n");
+	printk(KERN_ERR MOD "ARP failure during connect\n");
 	kfree_skb(skb);
 	connect_reply_upcall(ep, -EHOSTUNREACH);
 	state_set(&ep->com, DEAD);
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index f8e5db0..2ea12c6 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -549,13 +549,13 @@ static void *raid0_takeover_raid10(struct mddev *mddev)
 	 *  - all mirrors must be already degraded
 	 */
 	if (mddev->layout != ((1 << 8) + 2)) {
-		printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takover layout: 0x%x\n",
+		printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n",
 		       mdname(mddev),
 		       mddev->layout);
 		return ERR_PTR(-EINVAL);
 	}
 	if (mddev->raid_disks & 1) {
-		printk(KERN_ERR "md/raid0:%s: Raid0 cannot takover Raid10 with odd disk number.\n",
+		printk(KERN_ERR "md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n",
 		       mdname(mddev));
 		return ERR_PTR(-EINVAL);
 	}
diff --git a/drivers/media/common/saa7146/saa7146_video.c b/drivers/media/common/saa7146/saa7146_video.c
index 3077949..079f520 100644
--- a/drivers/media/common/saa7146/saa7146_video.c
+++ b/drivers/media/common/saa7146/saa7146_video.c
@@ -502,7 +502,7 @@ static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuf
 	/* check if overlay is running */
 	if (IS_OVERLAY_ACTIVE(fh) != 0) {
 		if (vv->video_fh != fh) {
-			DEB_D("refusing to change framebuffer informations while overlay is active in another open\n");
+			DEB_D("refusing to change framebuffer information while overlay is active in another open\n");
 			return -EBUSY;
 		}
 	}
diff --git a/drivers/media/dvb-frontends/m88ds3103.c b/drivers/media/dvb-frontends/m88ds3103.c
index feeeb70..ce73a5e 100644
--- a/drivers/media/dvb-frontends/m88ds3103.c
+++ b/drivers/media/dvb-frontends/m88ds3103.c
@@ -685,7 +685,7 @@ static int m88ds3103_init(struct dvb_frontend *fe)
 	/* request the firmware, this will block and timeout */
 	ret = request_firmware(&fw, fw_file, &client->dev);
 	if (ret) {
-		dev_err(&client->dev, "firmare file '%s' not found\n", fw_file);
+		dev_err(&client->dev, "firmware file '%s' not found\n", fw_file);
 		goto err;
 	}
 
diff --git a/drivers/media/dvb-frontends/si2165.c b/drivers/media/dvb-frontends/si2165.c
index 7c2eeee..1fcd925 100644
--- a/drivers/media/dvb-frontends/si2165.c
+++ b/drivers/media/dvb-frontends/si2165.c
@@ -511,7 +511,7 @@ static int si2165_upload_firmware(struct si2165_state *state)
 					   &offset, block_count);
 	if (ret < 0) {
 		dev_err(&state->i2c->dev,
-			"%s: firmare could not be uploaded\n",
+			"%s: firmware could not be uploaded\n",
 			KBUILD_MODNAME);
 		goto error;
 	}
@@ -535,7 +535,7 @@ static int si2165_upload_firmware(struct si2165_state *state)
 
 	if (len != offset) {
 		dev_err(&state->i2c->dev,
-			"%s: firmare len mismatch %04x != %04x\n",
+			"%s: firmware len mismatch %04x != %04x\n",
 			KBUILD_MODNAME, len, offset);
 		ret = -EINVAL;
 		goto error;
diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
index 83c90d3..487129b 100644
--- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
+++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
@@ -388,7 +388,7 @@ static int netup_unidvb_dvb_init(struct netup_unidvb_dev *ndev,
 		vb2_dvb_alloc_frontend(
 			&ndev->frontends[num], 3) == NULL) {
 		dev_dbg(&ndev->pci_dev->dev,
-			"%s(): unable to to alllocate vb2_dvb_frontend\n",
+			"%s(): unable to allocate vb2_dvb_frontend\n",
 			__func__);
 		return -ENOMEM;
 	}
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index d962164..6b84c0d 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1229,7 +1229,7 @@ static void i40evf_configure_rss_aq(struct i40e_vsi *vsi, const u8 *seed)
 
 	if (adapter->current_op != I40E_VIRTCHNL_OP_UNKNOWN) {
 		/* bail because we already have a command pending */
-		dev_err(&adapter->pdev->dev, "Cannot confiure RSS, command %d pending\n",
+		dev_err(&adapter->pdev->dev, "Cannot configure RSS, command %d pending\n",
 			adapter->current_op);
 		return;
 	}
diff --git a/drivers/soc/ti/knav_dma.c b/drivers/soc/ti/knav_dma.c
index bc1b80e..1a7b5ca 100644
--- a/drivers/soc/ti/knav_dma.c
+++ b/drivers/soc/ti/knav_dma.c
@@ -389,7 +389,7 @@ static int of_channel_match_helper(struct device_node *np, const char *name,
 	*dma_instance = dma_node->name;
 	index = of_property_match_string(np, "ti,navigator-dma-names", name);
 	if (index < 0) {
-		dev_err(kdev->dev, "No 'ti,navigator-dma-names' propery\n");
+		dev_err(kdev->dev, "No 'ti,navigator-dma-names' property\n");
 		return -ENODEV;
 	}