trivial: Fix misspelling of firmware

Fix misspelling of firmware.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 files changed, 12 insertions, 12 deletions

diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 88dd2e0..ce7551e 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2299,7 +2299,7 @@ static int sbmac_init(struct platform_device *pldev, long long base)
 	eaddr = sc->sbm_hwaddr;
 
 	/*
-	 * Read the ethernet address.  The firwmare left this programmed
+	 * Read the ethernet address.  The firmware left this programmed
 	 * for us in the ethernet address register for each mac.
 	 */
 
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f7efcec..ed60b18 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -11225,7 +11225,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 		return tg3_phy_init(tp);
 
 	/* Reading the PHY ID register can conflict with ASF
-	 * firwmare access to the PHY hardware.
+	 * firmware access to the PHY hardware.
 	 */
 	err = 0;
 	if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 115b704..f4e963b 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -2362,7 +2362,7 @@ static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
 		       i * sizeof(struct ipw2100_status));
 
 #ifdef IPW2100_DEBUG_C3
-	/* Halt the fimrware so we can get a good image */
+	/* Halt the firmware so we can get a good image */
 	write_register(priv->net_dev, IPW_REG_RESET_REG,
 		       IPW_AUX_HOST_RESET_REG_STOP_MASTER);
 	j = 5;
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index b344994..f6174fd 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -8844,7 +8844,7 @@ static int ipw_wx_set_mode(struct net_device *dev,
 #endif				/* CONFIG_IPW2200_MONITOR */
 
 	/* Free the existing firmware and reset the fw_loaded
-	 * flag so ipw_load() will bring in the new firmawre */
+	 * flag so ipw_load() will bring in the new firmware */
 	free_firmware();
 
 	priv->ieee->iw_mode = wrqu->mode;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 663dc83..3889158 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1337,7 +1337,7 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 
 	/* api_ver should match the api version forming part of the
 	 * firmware filename ... but we don't check for that and only rely
-	 * on the API version read from firware header from here on forward */
+	 * on the API version read from firmware header from here on forward */
 
 	if (api_ver < api_min || api_ver > api_max) {
 		IWL_ERR(priv, "Driver unable to support your firmware API. "
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index a71b08c..9d5f97d 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2562,7 +2562,7 @@ static int iwl3945_read_ucode(struct iwl_priv *priv)
 
 	/* api_ver should match the api version forming part of the
 	 * firmware filename ... but we don't check for that and only rely
-	 * on the API version read from firware header from here on forward */
+	 * on the API version read from firmware header from here on forward */
 
 	if (api_ver < api_min || api_ver > api_max) {
 		IWL_ERR(priv, "Driver unable to support your firmware API. "
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 639dd02..8c3605c 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1649,7 +1649,7 @@ static struct cmd_ctrl_node *lbs_get_cmd_ctrl_node(struct lbs_private *priv)
 
 /**
  *  @brief This function executes next command in command
- *  pending queue. It will put fimware back to PS mode
+ *  pending queue. It will put firmware back to PS mode
  *  if applicable.
  *
  *  @param priv     A pointer to struct lbs_private structure
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6d61200..dab33a2 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -550,7 +550,7 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
  * @dev: PCI device to handle.
  * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
  *
- * Transition a device to a new power state, using the platform formware and/or
+ * Transition a device to a new power state, using the platform firmware and/or
  * the device's PCI PM registers.
  *
  * RETURN VALUE:
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index d243320..814cb65 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -5811,7 +5811,7 @@ static struct ibm_struct volume_driver_data = {
  *	ThinkPads from this same time period (and earlier) probably lack the
  *	tachometer as well.
  *
- *	Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
+ *	Unfortunately a lot of ThinkPads with new-style ECs but whose firmware
  *	was never fixed by IBM to report the EC firmware version string
  *	probably support the tachometer (like the early X models), so
  *	detecting it is quite hard.  We need more data to know for sure.
diff --git a/drivers/staging/otus/hal/hpmain.c b/drivers/staging/otus/hal/hpmain.c
index 2e65c46..dab2783 100644
--- a/drivers/staging/otus/hal/hpmain.c
+++ b/drivers/staging/otus/hal/hpmain.c
@@ -152,7 +152,7 @@ u16_t zfHpInit(zdev_t* dev, u32_t frequency)
     else
     {
     #ifndef ZM_OTUS_LINUX_PHASE_2
-        /* donwload the normal frimware */
+        /* download the normal firmware */
         if ((ret = zfFirmwareDownload(dev, (u32_t*)zcFwImage,
                 (u32_t)zcFwImageSize, ZM_FIRMWARE_WLAN_ADDR)) != ZM_SUCCESS)
         {
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index b6483dd..9cf9ff6 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -626,7 +626,7 @@ static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *conte
 		goto err_fw_corrupted;
 
 	/*
-	 * Start to upload formware : send reset
+	 * Start to upload firmware : send reset
 	 */
 	value = 1;
 	ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value);
diff --git a/drivers/usb/serial/ChangeLog.history b/drivers/usb/serial/ChangeLog.history
index c1b2799..f13fd48 100644
--- a/drivers/usb/serial/ChangeLog.history
+++ b/drivers/usb/serial/ChangeLog.history
@@ -715,7 +715,7 @@ io_edgeport.c Change Log comments:
 
  0.2 (01/30/2000) greg kroah-hartman
 	Milestone 1 release.
-	Device is found by USB subsystem, enumerated, fimware is downloaded
+	Device is found by USB subsystem, enumerated, firmware is downloaded
 	and the descriptors are printed to the debug log, config is set, and
 	green light starts to blink. Open port works, and data can be sent
 	and received at the default settings of the UART. Loopback connector