Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (32 commits)
  ide-atapi: start dma in a drive-specific way
  ide-atapi: put the rest of non-ide-cd code into the else-clause of ide_transfer_pc
  ide-atapi: remove timeout arg to ide_issue_pc
  ide-cd: remove handler wrappers
  ide-cd: remove xferlen arg to cdrom_start_packet_command
  ide-atapi: split drive-specific functionality in ide_issue_pc
  ide-atapi: assign expiry and timeout based on device type
  ide-atapi: compute cmd_len based on device type in ide_transfer_pc
  ide: remove the last ide-scsi remnants
  ide-atapi: remove ide-scsi remnants from ide_pc_intr()
  ide-atapi: remove ide-scsi remnants from ide_transfer_pc()
  ide-atapi: remove ide-scsi remnants from ide_issue_pc
  ide-cd: move cdrom_timer_expiry to ide-atapi.c
  ide-atapi: teach ide atapi about drive->waiting_for_dma
  ide-atapi: accomodate transfer length calculation for ide-cd
  ide-atapi: setup dma for ide-cd
  ide-atapi: combine drive-specific assignments
  ide-atapi: add a dev_is_idecd-inline
  remove ide-scsi
  ide-floppy: allocate only toplevel packet commands
  ...

19 files changed, 549 insertions, 1539 deletions

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index c9f21e3..4ee85fc 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -137,6 +137,7 @@ config BLK_DEV_DELKIN
 
 config BLK_DEV_IDECD
 	tristate "Include IDE/ATAPI CDROM support"
+	select IDE_ATAPI
 	---help---
 	  If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
 	  a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
@@ -185,23 +186,6 @@ config BLK_DEV_IDETAPE
 	  To compile this driver as a module, choose M here: the
 	  module will be called ide-tape.
 
-config BLK_DEV_IDESCSI
-	tristate "SCSI emulation support (DEPRECATED)"
-	depends on SCSI
-	select IDE_ATAPI
-	---help---
-	  WARNING: ide-scsi is no longer needed for cd writing applications!
-	  The 2.6 kernel supports direct writing to ide-cd, which eliminates
-	  the need for ide-scsi + the entire scsi stack just for writing a
-	  cd. The new method is more efficient in every way.
-
-	  This will provide SCSI host adapter emulation for IDE ATAPI devices,
-	  and will allow you to use a SCSI device driver instead of a native
-	  ATAPI driver.
-
-	  If both this SCSI emulation and native ATAPI support are compiled
-	  into the kernel, the native support will be used.
-
 config BLK_DEV_IDEACPI
 	bool "IDE ACPI support"
 	depends on ACPI
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 177e3f8..4107289 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -5,7 +5,7 @@
 EXTRA_CFLAGS				+= -Idrivers/ide
 
 ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
-	      ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o
+	      ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o ide-sysfs.o
 
 # core IDE code
 ide-core-$(CONFIG_IDE_TIMINGS)		+= ide-timings.o
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 4e58b9e..e8688c0 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -3,6 +3,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/cdrom.h>
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <scsi/scsi.h>
@@ -14,6 +15,13 @@
 #define debug_log(fmt, args...) do {} while (0)
 #endif
 
+#define ATAPI_MIN_CDB_BYTES	12
+
+static inline int dev_is_idecd(ide_drive_t *drive)
+{
+	return drive->media == ide_cdrom || drive->media == ide_optical;
+}
+
 /*
  * Check whether we can support a device,
  * based on the ATAPI IDENTIFY command results.
@@ -233,18 +241,49 @@ void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk)
 }
 EXPORT_SYMBOL_GPL(ide_retry_pc);
 
-int ide_scsi_expiry(ide_drive_t *drive)
+int ide_cd_expiry(ide_drive_t *drive)
 {
-	struct ide_atapi_pc *pc = drive->pc;
+	struct request *rq = HWGROUP(drive)->rq;
+	unsigned long wait = 0;
 
-	debug_log("%s called for %lu at %lu\n", __func__,
-		  pc->scsi_cmd->serial_number, jiffies);
+	debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
 
-	pc->flags |= PC_FLAG_TIMEDOUT;
+	/*
+	 * Some commands are *slow* and normally take a long time to complete.
+	 * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+	 * commands/drives support that. Let ide_timer_expiry keep polling us
+	 * for these.
+	 */
+	switch (rq->cmd[0]) {
+	case GPCMD_BLANK:
+	case GPCMD_FORMAT_UNIT:
+	case GPCMD_RESERVE_RZONE_TRACK:
+	case GPCMD_CLOSE_TRACK:
+	case GPCMD_FLUSH_CACHE:
+		wait = ATAPI_WAIT_PC;
+		break;
+	default:
+		if (!(rq->cmd_flags & REQ_QUIET))
+			printk(KERN_INFO "cmd 0x%x timed out\n",
+					 rq->cmd[0]);
+		wait = 0;
+		break;
+	}
+	return wait;
+}
+EXPORT_SYMBOL_GPL(ide_cd_expiry);
 
-	return 0; /* we do not want the IDE subsystem to retry */
+int ide_cd_get_xferlen(struct request *rq)
+{
+	if (blk_fs_request(rq))
+		return 32768;
+	else if (blk_sense_request(rq) || blk_pc_request(rq) ||
+			 rq->cmd_type == REQ_TYPE_ATA_PC)
+		return rq->data_len;
+	else
+		return 0;
 }
-EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+EXPORT_SYMBOL_GPL(ide_cd_get_xferlen);
 
 /*
  * This is the usual interrupt handler which will be called during a packet
@@ -258,21 +297,14 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 	struct request *rq = hwif->hwgroup->rq;
 	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	xfer_func_t *xferfunc;
-	ide_expiry_t *expiry;
 	unsigned int timeout, temp;
 	u16 bcount;
-	u8 stat, ireason, scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI), dsc = 0;
+	u8 stat, ireason, dsc = 0;
 
 	debug_log("Enter %s - interrupt handler\n", __func__);
 
-	if (scsi) {
-		timeout = ide_scsi_get_timeout(pc);
-		expiry = ide_scsi_expiry;
-	} else {
-		timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
-						       : WAIT_TAPE_CMD;
-		expiry = NULL;
-	}
+	timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
+					       : WAIT_TAPE_CMD;
 
 	if (pc->flags & PC_FLAG_TIMEDOUT) {
 		drive->pc_callback(drive, 0);
@@ -284,8 +316,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 
 	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
 		if (hwif->dma_ops->dma_end(drive) ||
-		    (drive->media == ide_tape && !scsi && (stat & ATA_ERR))) {
-			if (drive->media == ide_floppy && !scsi)
+		    (drive->media == ide_tape && (stat & ATA_ERR))) {
+			if (drive->media == ide_floppy)
 				printk(KERN_ERR "%s: DMA %s error\n",
 					drive->name, rq_data_dir(pc->rq)
 						     ? "write" : "read");
@@ -307,7 +339,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 
 		local_irq_enable_in_hardirq();
 
-		if (drive->media == ide_tape && !scsi &&
+		if (drive->media == ide_tape &&
 		    (stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE)
 			stat &= ~ATA_ERR;
 
@@ -315,11 +347,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 			/* Error detected */
 			debug_log("%s: I/O error\n", drive->name);
 
-			if (drive->media != ide_tape || scsi) {
+			if (drive->media != ide_tape)
 				pc->rq->errors++;
-				if (scsi)
-					goto cmd_finished;
-			}
 
 			if (rq->cmd[0] == REQUEST_SENSE) {
 				printk(KERN_ERR "%s: I/O error in request sense"
@@ -335,7 +364,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 			/* queued, but not started */
 			return ide_stopped;
 		}
-cmd_finished:
 		pc->error = 0;
 
 		if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
@@ -382,25 +410,8 @@ cmd_finished:
 						"us more data than expected - "
 						"discarding data\n",
 						drive->name);
-				if (scsi)
-					temp = pc->buf_size - pc->xferred;
-				else
-					temp = 0;
-				if (temp) {
-					if (pc->sg)
-						drive->pc_io_buffers(drive, pc,
-								     temp, 0);
-					else
-						tp_ops->input_data(drive, NULL,
-							pc->cur_pos, temp);
-					printk(KERN_ERR "%s: transferred %d of "
-							"%d bytes\n",
-							drive->name,
-							temp, bcount);
-				}
-				pc->xferred += temp;
-				pc->cur_pos += temp;
-				ide_pad_transfer(drive, 0, bcount - temp);
+
+				ide_pad_transfer(drive, 0, bcount);
 				goto next_irq;
 			}
 			debug_log("The device wants to send us more data than "
@@ -410,14 +421,13 @@ cmd_finished:
 	} else
 		xferfunc = tp_ops->output_data;
 
-	if ((drive->media == ide_floppy && !scsi && !pc->buf) ||
-	    (drive->media == ide_tape && !scsi && pc->bh) ||
-	    (scsi && pc->sg)) {
+	if ((drive->media == ide_floppy && !pc->buf) ||
+	    (drive->media == ide_tape && pc->bh)) {
 		int done = drive->pc_io_buffers(drive, pc, bcount,
 				  !!(pc->flags & PC_FLAG_WRITING));
 
 		/* FIXME: don't do partial completions */
-		if (drive->media == ide_floppy && !scsi)
+		if (drive->media == ide_floppy)
 			ide_end_request(drive, 1, done >> 9);
 	} else
 		xferfunc(drive, NULL, pc->cur_pos, bcount);
@@ -430,7 +440,7 @@ cmd_finished:
 		  rq->cmd[0], bcount);
 next_irq:
 	/* And set the interrupt handler again */
-	ide_set_handler(drive, ide_pc_intr, timeout, expiry);
+	ide_set_handler(drive, ide_pc_intr, timeout, NULL);
 	return ide_started;
 }
 
@@ -479,11 +489,12 @@ static int ide_delayed_transfer_pc(ide_drive_t *drive)
 
 static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 {
-	struct ide_atapi_pc *pc = drive->pc;
+	struct ide_atapi_pc *uninitialized_var(pc);
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq = hwif->hwgroup->rq;
 	ide_expiry_t *expiry;
 	unsigned int timeout;
+	int cmd_len;
 	ide_startstop_t startstop;
 	u8 ireason;
 
@@ -493,101 +504,124 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 		return startstop;
 	}
 
-	ireason = ide_read_ireason(drive);
-	if (drive->media == ide_tape &&
-	    (drive->dev_flags & IDE_DFLAG_SCSI) == 0)
-		ireason = ide_wait_ireason(drive, ireason);
-
-	if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
-		printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
-				"a packet command\n", drive->name);
-		return ide_do_reset(drive);
+	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+		if (drive->dma)
+			drive->waiting_for_dma = 1;
 	}
 
-	/*
-	 * If necessary schedule the packet transfer to occur 'timeout'
-	 * miliseconds later in ide_delayed_transfer_pc() after the device
-	 * says it's ready for a packet.
-	 */
-	if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
-		timeout = drive->pc_delay;
-		expiry = &ide_delayed_transfer_pc;
+	if (dev_is_idecd(drive)) {
+		/* ATAPI commands get padded out to 12 bytes minimum */
+		cmd_len = COMMAND_SIZE(rq->cmd[0]);
+		if (cmd_len < ATAPI_MIN_CDB_BYTES)
+			cmd_len = ATAPI_MIN_CDB_BYTES;
+
+		timeout = rq->timeout;
+		expiry  = ide_cd_expiry;
 	} else {
-		if (drive->dev_flags & IDE_DFLAG_SCSI) {
-			timeout = ide_scsi_get_timeout(pc);
-			expiry = ide_scsi_expiry;
+		pc = drive->pc;
+
+		cmd_len = ATAPI_MIN_CDB_BYTES;
+
+		/*
+		 * If necessary schedule the packet transfer to occur 'timeout'
+		 * miliseconds later in ide_delayed_transfer_pc() after the
+		 * device says it's ready for a packet.
+		 */
+		if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
+			timeout = drive->pc_delay;
+			expiry = &ide_delayed_transfer_pc;
 		} else {
 			timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
 							       : WAIT_TAPE_CMD;
 			expiry = NULL;
 		}
+
+		ireason = ide_read_ireason(drive);
+		if (drive->media == ide_tape)
+			ireason = ide_wait_ireason(drive, ireason);
+
+		if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
+			printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
+					"a packet command\n", drive->name);
+
+			return ide_do_reset(drive);
+		}
 	}
 
 	/* Set the interrupt routine */
 	ide_set_handler(drive, ide_pc_intr, timeout, expiry);
 
 	/* Begin DMA, if necessary */
-	if (pc->flags & PC_FLAG_DMA_OK) {
-		pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
-		hwif->dma_ops->dma_start(drive);
+	if (dev_is_idecd(drive)) {
+		if (drive->dma)
+			hwif->dma_ops->dma_start(drive);
+	} else {
+		if (pc->flags & PC_FLAG_DMA_OK) {
+			pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
+			hwif->dma_ops->dma_start(drive);
+		}
 	}
 
 	/* Send the actual packet */
 	if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0)
-		hwif->tp_ops->output_data(drive, NULL, rq->cmd, 12);
+		hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
 
 	return ide_started;
 }
 
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
-			     ide_expiry_t *expiry)
+ide_startstop_t ide_issue_pc(ide_drive_t *drive)
 {
-	struct ide_atapi_pc *pc = drive->pc;
+	struct ide_atapi_pc *pc;
 	ide_hwif_t *hwif = drive->hwif;
+	ide_expiry_t *expiry = NULL;
+	unsigned int timeout;
 	u32 tf_flags;
 	u16 bcount;
-	u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
 
-	/* We haven't transferred any data yet */
-	pc->xferred = 0;
-	pc->cur_pos = pc->buf;
+	if (dev_is_idecd(drive)) {
+		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+		bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
+		expiry = ide_cd_expiry;
+		timeout = ATAPI_WAIT_PC;
 
-	/* Request to transfer the entire buffer at once */
-	if (drive->media == ide_tape && scsi == 0)
-		bcount = pc->req_xfer;
-	else
-		bcount = min(pc->req_xfer, 63 * 1024);
+		if (drive->dma)
+			drive->dma = !hwif->dma_ops->dma_setup(drive);
+	} else {
+		pc = drive->pc;
 
-	if (pc->flags & PC_FLAG_DMA_ERROR) {
-		pc->flags &= ~PC_FLAG_DMA_ERROR;
-		ide_dma_off(drive);
-	}
+		/* We haven't transferred any data yet */
+		pc->xferred = 0;
+		pc->cur_pos = pc->buf;
 
-	if ((pc->flags & PC_FLAG_DMA_OK) &&
-	    (drive->dev_flags & IDE_DFLAG_USING_DMA)) {
-		if (scsi)
-			hwif->sg_mapped = 1;
-		drive->dma = !hwif->dma_ops->dma_setup(drive);
-		if (scsi)
-			hwif->sg_mapped = 0;
-	}
+		tf_flags = IDE_TFLAG_OUT_DEVICE;
+		bcount = ((drive->media == ide_tape) ?
+				pc->req_xfer :
+				min(pc->req_xfer, 63 * 1024));
 
-	if (!drive->dma)
-		pc->flags &= ~PC_FLAG_DMA_OK;
+		if (pc->flags & PC_FLAG_DMA_ERROR) {
+			pc->flags &= ~PC_FLAG_DMA_ERROR;
+			ide_dma_off(drive);
+		}
 
-	if (scsi)
-		tf_flags = 0;
-	else if (drive->media == ide_cdrom || drive->media == ide_optical)
-		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
-	else
-		tf_flags = IDE_TFLAG_OUT_DEVICE;
+		if ((pc->flags & PC_FLAG_DMA_OK) &&
+		     (drive->dev_flags & IDE_DFLAG_USING_DMA))
+			drive->dma = !hwif->dma_ops->dma_setup(drive);
+
+		if (!drive->dma)
+			pc->flags &= ~PC_FLAG_DMA_OK;
+
+		timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
+						       : WAIT_TAPE_CMD;
+	}
 
 	ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma);
 
 	/* Issue the packet command */
 	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+		if (drive->dma)
+			drive->waiting_for_dma = 0;
 		ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
-				    timeout, NULL);
+				    timeout, expiry);
 		return ide_started;
 	} else {
 		ide_execute_pkt_cmd(drive);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 5daa4dd..1a7410f 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -53,14 +53,6 @@
 
 #include "ide-cd.h"
 
-#define IDECD_DEBUG_LOG		1
-
-#if IDECD_DEBUG_LOG
-#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
-#else
-#define ide_debug_log(lvl, fmt, args...) do {} while (0)
-#endif
-
 static DEFINE_MUTEX(idecd_ref_mutex);
 
 static void ide_cd_release(struct kref *);
@@ -519,37 +511,8 @@ end_request:
 	return 1;
 }
 
-static int cdrom_timer_expiry(ide_drive_t *drive)
-{
-	struct request *rq = HWGROUP(drive)->rq;
-	unsigned long wait = 0;
-
-	ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
-		      rq->cmd[0]);
-
-	/*
-	 * Some commands are *slow* and normally take a long time to complete.
-	 * Usually we can use the ATAPI "disconnect" to bypass this, but not all
-	 * commands/drives support that. Let ide_timer_expiry keep polling us
-	 * for these.
-	 */
-	switch (rq->cmd[0]) {
-	case GPCMD_BLANK:
-	case GPCMD_FORMAT_UNIT:
-	case GPCMD_RESERVE_RZONE_TRACK:
-	case GPCMD_CLOSE_TRACK:
-	case GPCMD_FLUSH_CACHE:
-		wait = ATAPI_WAIT_PC;
-		break;
-	default:
-		if (!(rq->cmd_flags & REQ_QUIET))
-			printk(KERN_INFO PFX "cmd 0x%x timed out\n",
-					 rq->cmd[0]);
-		wait = 0;
-		break;
-	}
-	return wait;
-}
+static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *);
+static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
 
 /*
  * Set up the device registers for transferring a packet command on DEV,
@@ -559,11 +522,13 @@ static int cdrom_timer_expiry(ide_drive_t *drive)
  * called when the interrupt from the drive arrives.  Otherwise, HANDLER
  * will be called immediately after the drive is prepared for the transfer.
  */
-static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
-						  int xferlen,
-						  ide_handler_t *handler)
+static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
+	struct request *rq = hwif->hwgroup->rq;
+	int xferlen;
+
+	xferlen = ide_cd_get_xferlen(rq);
 
 	ide_debug_log(IDE_DBG_PC, "Call %s, xferlen: %d\n", __func__, xferlen);
 
@@ -581,13 +546,14 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
 			drive->waiting_for_dma = 0;
 
 		/* packet command */
-		ide_execute_command(drive, ATA_CMD_PACKET, handler,
-				    ATAPI_WAIT_PC, cdrom_timer_expiry);
+		ide_execute_command(drive, ATA_CMD_PACKET,
+				    cdrom_transfer_packet_command,
+				    ATAPI_WAIT_PC, ide_cd_expiry);
 		return ide_started;
 	} else {
 		ide_execute_pkt_cmd(drive);
 
-		return (*handler) (drive);
+		return cdrom_transfer_packet_command(drive);
 	}
 }
 
@@ -598,11 +564,10 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
  * there's data ready.
  */
 #define ATAPI_MIN_CDB_BYTES 12
-static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
-					  struct request *rq,
-					  ide_handler_t *handler)
+static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
+	struct request *rq = hwif->hwgroup->rq;
 	int cmd_len;
 	ide_startstop_t startstop;
 
@@ -629,7 +594,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
 	}
 
 	/* arm the interrupt handler */
-	ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
+	ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, ide_cd_expiry);
 
 	/* ATAPI commands get padded out to 12 bytes minimum */
 	cmd_len = COMMAND_SIZE(rq->cmd[0]);
@@ -717,8 +682,6 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
 	return 1;
 }
 
-static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
-
 static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
 						 struct request *rq)
 {
@@ -761,20 +724,6 @@ static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
 }
 
 /*
- * Routine to send a read/write packet command to the drive. This is usually
- * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
- * devices, it is called from an interrupt when the drive is ready to accept
- * the command.
- */
-static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
-{
-	struct request *rq = drive->hwif->hwgroup->rq;
-
-	/* send the command to the drive and return */
-	return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
-}
-
-/*
  * Fix up a possibly partially-processed request so that we can start it over
  * entirely, or even put it back on the request queue.
  */
@@ -1096,7 +1045,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 	} else {
 		timeout = ATAPI_WAIT_PC;
 		if (!blk_fs_request(rq))
-			expiry = cdrom_timer_expiry;
+			expiry = ide_cd_expiry;
 	}
 
 	ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
@@ -1163,13 +1112,6 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
 	return ide_started;
 }
 
-static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
-{
-	struct request *rq = HWGROUP(drive)->rq;
-
-	return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
-}
-
 static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 {
 
@@ -1214,18 +1156,12 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 					sector_t block)
 {
-	ide_handler_t *fn;
-	int xferlen;
-
 	ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd[0]: 0x%x, "
 		      "rq->cmd_type: 0x%x, block: %llu\n",
 		      __func__, rq->cmd[0], rq->cmd_type,
 		      (unsigned long long)block);
 
 	if (blk_fs_request(rq)) {
-		xferlen = 32768;
-		fn = cdrom_start_rw_cont;
-
 		if (cdrom_start_rw(drive, rq) == ide_stopped)
 			return ide_stopped;
 
@@ -1233,9 +1169,6 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 			return ide_stopped;
 	} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
 		   rq->cmd_type == REQ_TYPE_ATA_PC) {
-		xferlen = rq->data_len;
-		fn = cdrom_do_newpc_cont;
-
 		if (!rq->timeout)
 			rq->timeout = ATAPI_WAIT_PC;
 
@@ -1250,7 +1183,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		return ide_stopped;
 	}
 
-	return cdrom_start_packet_command(drive, xferlen, fn);
+	return cdrom_start_packet_command(drive);
 }
 
 /*
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index d5ce336..bf676b2 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -8,10 +8,14 @@
 #include <linux/cdrom.h>
 #include <asm/byteorder.h>
 
-/*
- * typical timeout for packet command
- */
-#define ATAPI_WAIT_PC		(60 * HZ)
+#define IDECD_DEBUG_LOG		0
+
+#if IDECD_DEBUG_LOG
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
+#else
+#define ide_debug_log(lvl, fmt, args...) do {} while (0)
+#endif
+
 #define ATAPI_WAIT_WRITE_BUSY	(10 * HZ)
 
 /************************************************************************/
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index aeb1ad7..0a48e2d 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -197,7 +197,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
 
 	pc->retries++;
 
-	return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
+	return ide_issue_pc(drive);
 }
 
 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
@@ -342,38 +342,38 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
  * Look at the flexible disk page parameters. We ignore the CHS capacity
  * parameters and use the LBA parameters instead.
  */
-static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
+static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
+					     struct ide_atapi_pc *pc)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
 	struct gendisk *disk = floppy->disk;
-	struct ide_atapi_pc pc;
 	u8 *page;
 	int capacity, lba_capacity;
 	u16 transfer_rate, sector_size, cyls, rpm;
 	u8 heads, sectors;
 
-	ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
+	ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
 
-	if (ide_queue_pc_tail(drive, disk, &pc)) {
+	if (ide_queue_pc_tail(drive, disk, pc)) {
 		printk(KERN_ERR PFX "Can't get flexible disk page params\n");
 		return 1;
 	}
 
-	if (pc.buf[3] & 0x80)
+	if (pc->buf[3] & 0x80)
 		drive->dev_flags |= IDE_DFLAG_WP;
 	else
 		drive->dev_flags &= ~IDE_DFLAG_WP;
 
 	set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
 
-	page = &pc.buf[8];
+	page = &pc->buf[8];
 
-	transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]);
-	sector_size   = be16_to_cpup((__be16 *)&pc.buf[8 + 6]);
-	cyls          = be16_to_cpup((__be16 *)&pc.buf[8 + 8]);
-	rpm           = be16_to_cpup((__be16 *)&pc.buf[8 + 28]);
-	heads         = pc.buf[8 + 4];
-	sectors       = pc.buf[8 + 5];
+	transfer_rate = be16_to_cpup((__be16 *)&pc->buf[8 + 2]);
+	sector_size   = be16_to_cpup((__be16 *)&pc->buf[8 + 6]);
+	cyls          = be16_to_cpup((__be16 *)&pc->buf[8 + 8]);
+	rpm           = be16_to_cpup((__be16 *)&pc->buf[8 + 28]);
+	heads         = pc->buf[8 + 4];
+	sectors       = pc->buf[8 + 5];
 
 	capacity = cyls * heads * sectors * sector_size;
 
@@ -499,7 +499,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
 
 	/* Clik! disk does not support get_flexible_disk_page */
 	if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
-		(void) ide_floppy_get_flexible_disk_page(drive);
+		(void) ide_floppy_get_flexible_disk_page(drive, &pc);
 
 	return rc;
 }
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 2bc51ff..8f8be85 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -31,10 +31,11 @@
  * On exit we set nformats to the number of records we've actually initialized.
  */
 
-static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_get_format_capacities(ide_drive_t *drive,
+					    struct ide_atapi_pc *pc,
+					    int __user *arg)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
-	struct ide_atapi_pc pc;
 	u8 header_len, desc_cnt;
 	int i, blocks, length, u_array_size, u_index;
 	int __user *argp;
@@ -45,13 +46,13 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
 	if (u_array_size <= 0)
 		return -EINVAL;
 
-	ide_floppy_create_read_capacity_cmd(&pc);
-	if (ide_queue_pc_tail(drive, floppy->disk, &pc)) {
+	ide_floppy_create_read_capacity_cmd(pc);
+	if (ide_queue_pc_tail(drive, floppy->disk, pc)) {
 		printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
 		return -EIO;
 	}
 
-	header_len = pc.buf[3];
+	header_len = pc->buf[3];
 	desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
 
 	u_index = 0;
@@ -68,8 +69,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
 		if (u_index >= u_array_size)
 			break;	/* User-supplied buffer too small */
 
-		blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
-		length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
+		blocks = be32_to_cpup((__be32 *)&pc->buf[desc_start]);
+		length = be16_to_cpup((__be16 *)&pc->buf[desc_start + 6]);
 
 		if (put_user(blocks, argp))
 			return -EFAULT;
@@ -111,29 +112,28 @@ static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
 	pc->flags |= PC_FLAG_WRITING;
 }
 
-static int ide_floppy_get_sfrp_bit(ide_drive_t *drive)
+static int ide_floppy_get_sfrp_bit(ide_drive_t *drive, struct ide_atapi_pc *pc)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
-	struct ide_atapi_pc pc;
 
 	drive->atapi_flags &= ~IDE_AFLAG_SRFP;
 
-	ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE);
-	pc.flags |= PC_FLAG_SUPPRESS_ERROR;
+	ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_CAPABILITIES_PAGE);
+	pc->flags |= PC_FLAG_SUPPRESS_ERROR;
 
-	if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+	if (ide_queue_pc_tail(drive, floppy->disk, pc))
 		return 1;
 
-	if (pc.buf[8 + 2] & 0x40)
+	if (pc->buf[8 + 2] & 0x40)
 		drive->atapi_flags |= IDE_AFLAG_SRFP;
 
 	return 0;
 }
 
-static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
+				  int __user *arg)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
-	struct ide_atapi_pc pc;
 	int blocks, length, flags, err = 0;
 
 	if (floppy->openers > 1) {
@@ -166,10 +166,10 @@ static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
 		goto out;
 	}
 
-	(void)ide_floppy_get_sfrp_bit(drive);
-	ide_floppy_create_format_unit_cmd(&pc, blocks, length, flags);
+	ide_floppy_get_sfrp_bit(drive, pc);
+	ide_floppy_create_format_unit_cmd(pc, blocks, length, flags);
 
-	if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+	if (ide_queue_pc_tail(drive, floppy->disk, pc))
 		err = -EIO;
 
 out:
@@ -188,15 +188,16 @@ out:
  * the dsc bit, and return either 0 or 65536.
  */
 
-static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_get_format_progress(ide_drive_t *drive,
+					  struct ide_atapi_pc *pc,
+					  int __user *arg)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
-	struct ide_atapi_pc pc;
 	int progress_indication = 0x10000;
 
 	if (drive->atapi_flags & IDE_AFLAG_SRFP) {
-		ide_create_request_sense_cmd(drive, &pc);
-		if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+		ide_create_request_sense_cmd(drive, pc);
+		if (ide_queue_pc_tail(drive, floppy->disk, pc))
 			return -EIO;
 
 		if (floppy->sense_key == 2 &&
@@ -241,20 +242,21 @@ static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	return 0;
 }
 
-static int ide_floppy_format_ioctl(ide_drive_t *drive, fmode_t mode,
-				   unsigned int cmd, void __user *argp)
+static int ide_floppy_format_ioctl(ide_drive_t *drive, struct ide_atapi_pc *pc,
+				   fmode_t mode, unsigned int cmd,
+				   void __user *argp)
 {
 	switch (cmd) {
 	case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
 		return 0;
 	case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
-		return ide_floppy_get_format_capacities(drive, argp);
+		return ide_floppy_get_format_capacities(drive, pc, argp);
 	case IDEFLOPPY_IOCTL_FORMAT_START:
 		if (!(mode & FMODE_WRITE))
 			return -EPERM;
-		return ide_floppy_format_unit(drive, (int __user *)argp);
+		return ide_floppy_format_unit(drive, pc, (int __user *)argp);
 	case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
-		return ide_floppy_get_format_progress(drive, argp);
+		return ide_floppy_get_format_progress(drive, pc, argp);
 	default:
 		return -ENOTTY;
 	}
@@ -270,7 +272,7 @@ int ide_floppy_ioctl(ide_drive_t *drive, struct block_device *bdev,
 	if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
 		return ide_floppy_lockdoor(drive, &pc, arg, cmd);
 
-	err = ide_floppy_format_ioctl(drive, mode, cmd, argp);
+	err = ide_floppy_format_ioctl(drive, &pc, mode, cmd, argp);
 	if (err != -ENOTTY)
 		return err;
 
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index ecacc00..1c36a8e 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -426,9 +426,6 @@ void ide_map_sg(ide_drive_t *drive, struct request *rq)
 	ide_hwif_t *hwif = drive->hwif;
 	struct scatterlist *sg = hwif->sg_table;
 
-	if (hwif->sg_mapped)	/* needed by ide-scsi */
-		return;
-
 	if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) {
 		hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
 	} else {
@@ -667,85 +664,10 @@ void ide_stall_queue (ide_drive_t *drive, unsigned long timeout)
 	drive->sleep = timeout + jiffies;
 	drive->dev_flags |= IDE_DFLAG_SLEEPING;
 }
-
 EXPORT_SYMBOL(ide_stall_queue);
 
-#define WAKEUP(drive)	((drive)->service_start + 2 * (drive)->service_time)
-
-/**
- *	choose_drive		-	select a drive to service
- *	@hwgroup: hardware group to select on
- *
- *	choose_drive() selects the next drive which will be serviced.
- *	This is necessary because the IDE layer can't issue commands
- *	to both drives on the same cable, unlike SCSI.
- */
- 
-static inline ide_drive_t *choose_drive (ide_hwgroup_t *hwgroup)
-{
-	ide_drive_t *drive, *best;
-
-repeat:	
-	best = NULL;
-	drive = hwgroup->drive;
-
-	/*
-	 * drive is doing pre-flush, ordered write, post-flush sequence. even
-	 * though that is 3 requests, it must be seen as a single transaction.
-	 * we must not preempt this drive until that is complete
-	 */
-	if (blk_queue_flushing(drive->queue)) {
-		/*
-		 * small race where queue could get replugged during
-		 * the 3-request flush cycle, just yank the plug since
-		 * we want it to finish asap
-		 */
-		blk_remove_plug(drive->queue);
-		return drive;
-	}
-
-	do {
-		u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING);
-		u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING));
-
-		if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) &&
-		    !elv_queue_empty(drive->queue)) {
-			if (best == NULL ||
-			    (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) ||
-			    (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) {
-				if (!blk_queue_plugged(drive->queue))
-					best = drive;
-			}
-		}
-	} while ((drive = drive->next) != hwgroup->drive);
-
-	if (best && (best->dev_flags & IDE_DFLAG_NICE1) &&
-	    (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 &&
-	    best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
-		long t = (signed long)(WAKEUP(best) - jiffies);
-		if (t >= WAIT_MIN_SLEEP) {
-		/*
-		 * We *may* have some time to spare, but first let's see if
-		 * someone can potentially benefit from our nice mood today..
-		 */
-			drive = best->next;
-			do {
-				if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0
-				 && time_before(jiffies - best->service_time, WAKEUP(drive))
-				 && time_before(WAKEUP(drive), jiffies + t))
-				{
-					ide_stall_queue(best, min_t(long, t, 10 * WAIT_MIN_SLEEP));
-					goto repeat;
-				}
-			} while ((drive = drive->next) != best);
-		}
-	}
-	return best;
-}
-
 /*
  * Issue a new request to a drive from hwgroup
- * Caller must have already done spin_lock_irqsave(&hwgroup->lock, ..);
  *
  * A hwgroup is a serialized group of IDE interfaces.  Usually there is
  * exactly one hwif (interface) per hwgroup, but buggy controllers (eg. CMD640)
@@ -757,8 +679,7 @@ repeat:
  * possibly along with many other devices.  This is especially common in
  * PCI-based systems with off-board IDE controller cards.
  *
- * The IDE driver uses a per-hwgroup spinlock to protect
- * access to the request queues, and to protect the hwgroup->busy flag.
+ * The IDE driver uses a per-hwgroup lock to protect the hwgroup->busy flag.
  *
  * The first thread into the driver for a particular hwgroup sets the
  * hwgroup->busy flag to indicate that this hwgroup is now active,
@@ -778,69 +699,41 @@ repeat:
  * the driver.  This makes the driver much more friendlier to shared IRQs
  * than previous designs, while remaining 100% (?) SMP safe and capable.
  */
-static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
+void do_ide_request(struct request_queue *q)
 {
-	ide_drive_t	*drive;
-	ide_hwif_t	*hwif;
+	ide_drive_t	*drive = q->queuedata;
+	ide_hwif_t	*hwif = drive->hwif;
+	ide_hwgroup_t	*hwgroup = hwif->hwgroup;
 	struct request	*rq;
 	ide_startstop_t	startstop;
-	int             loops = 0;
-
-	/* caller must own hwgroup->lock */
-	BUG_ON(!irqs_disabled());
-
-	while (!hwgroup->busy) {
-		hwgroup->busy = 1;
-		/* for atari only */
-		ide_get_lock(ide_intr, hwgroup);
-		drive = choose_drive(hwgroup);
-		if (drive == NULL) {
-			int sleeping = 0;
-			unsigned long sleep = 0; /* shut up, gcc */
-			hwgroup->rq = NULL;
-			drive = hwgroup->drive;
-			do {
-				if ((drive->dev_flags & IDE_DFLAG_SLEEPING) &&
-				    (sleeping == 0 ||
-				     time_before(drive->sleep, sleep))) {
-					sleeping = 1;
-					sleep = drive->sleep;
-				}
-			} while ((drive = drive->next) != hwgroup->drive);
-			if (sleeping) {
+
+	/*
+	 * drive is doing pre-flush, ordered write, post-flush sequence. even
+	 * though that is 3 requests, it must be seen as a single transaction.
+	 * we must not preempt this drive until that is complete
+	 */
+	if (blk_queue_flushing(q))
 		/*
-		 * Take a short snooze, and then wake up this hwgroup again.
-		 * This gives other hwgroups on the same a chance to
-		 * play fairly with us, just in case there are big differences
-		 * in relative throughputs.. don't want to hog the cpu too much.
+		 * small race where queue could get replugged during
+		 * the 3-request flush cycle, just yank the plug since
+		 * we want it to finish asap
 		 */
-				if (time_before(sleep, jiffies + WAIT_MIN_SLEEP))
-					sleep = jiffies + WAIT_MIN_SLEEP;
-#if 1
-				if (timer_pending(&hwgroup->timer))
-					printk(KERN_CRIT "ide_set_handler: timer already active\n");
-#endif
-				/* so that ide_timer_expiry knows what to do */
-				hwgroup->sleeping = 1;
-				hwgroup->req_gen_timer = hwgroup->req_gen;
-				mod_timer(&hwgroup->timer, sleep);
-				/* we purposely leave hwgroup->busy==1
-				 * while sleeping */
-			} else {
-				/* Ugly, but how can we sleep for the lock
-				 * otherwise? perhaps from tq_disk?
-				 */
+		blk_remove_plug(q);
 
-				/* for atari only */
-				ide_release_lock();
-				hwgroup->busy = 0;
-			}
+	spin_unlock_irq(q->queue_lock);
+	spin_lock_irq(&hwgroup->lock);
+
+	if (!ide_lock_hwgroup(hwgroup)) {
+repeat:
+		hwgroup->rq = NULL;
 
-			/* no more work for this hwgroup (for now) */
-			return;
+		if (drive->dev_flags & IDE_DFLAG_SLEEPING) {
+			if (time_before(drive->sleep, jiffies)) {
+				ide_unlock_hwgroup(hwgroup);
+				goto plug_device;
+			}
 		}
-	again:
-		hwif = HWIF(drive);
+
 		if (hwif != hwgroup->hwif) {
 			/*
 			 * set nIEN for previous hwif, drives in the
@@ -852,16 +745,20 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 		hwgroup->hwif = hwif;
 		hwgroup->drive = drive;
 		drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
-		drive->service_start = jiffies;
 
+		spin_unlock_irq(&hwgroup->lock);
+		spin_lock_irq(q->queue_lock);
 		/*
 		 * we know that the queue isn't empty, but this can happen
 		 * if the q->prep_rq_fn() decides to kill a request
 		 */
 		rq = elv_next_request(drive->queue);
+		spin_unlock_irq(q->queue_lock);
+		spin_lock_irq(&hwgroup->lock);
+
 		if (!rq) {
-			hwgroup->busy = 0;
-			break;
+			ide_unlock_hwgroup(hwgroup);
+			goto out;
 		}
 
 		/*
@@ -876,53 +773,36 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 		 * though. I hope that doesn't happen too much, hopefully not
 		 * unless the subdriver triggers such a thing in its own PM
 		 * state machine.
-		 *
-		 * We count how many times we loop here to make sure we service
-		 * all drives in the hwgroup without looping for ever
 		 */
 		if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
 		    blk_pm_request(rq) == 0 &&
 		    (rq->cmd_flags & REQ_PREEMPT) == 0) {
-			drive = drive->next ? drive->next : hwgroup->drive;
-			if (loops++ < 4 && !blk_queue_plugged(drive->queue))
-				goto again;
-			/* We clear busy, there should be no pending ATA command at this point. */
-			hwgroup->busy = 0;
-			break;
+			/* there should be no pending command at this point */
+			ide_unlock_hwgroup(hwgroup);
+			goto plug_device;
 		}
 
 		hwgroup->rq = rq;
 
-		/*
-		 * Some systems have trouble with IDE IRQs arriving while
-		 * the driver is still setting things up.  So, here we disable
-		 * the IRQ used by this interface while the request is being started.
-		 * This may look bad at first, but pretty much the same thing
-		 * happens anyway when any interrupt comes in, IDE or otherwise
-		 *  -- the kernel masks the IRQ while it is being handled.
-		 */
-		if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
-			disable_irq_nosync(hwif->irq);
-		spin_unlock(&hwgroup->lock);
-		local_irq_enable_in_hardirq();
-			/* allow other IRQs while we start this request */
+		spin_unlock_irq(&hwgroup->lock);
 		startstop = start_request(drive, rq);
 		spin_lock_irq(&hwgroup->lock);
-		if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
-			enable_irq(hwif->irq);
+
 		if (startstop == ide_stopped)
-			hwgroup->busy = 0;
-	}
-}
+			goto repeat;
+	} else
+		goto plug_device;
+out:
+	spin_unlock_irq(&hwgroup->lock);
+	spin_lock_irq(q->queue_lock);
+	return;
 
-/*
- * Passes the stuff to ide_do_request
- */
-void do_ide_request(struct request_queue *q)
-{
-	ide_drive_t *drive = q->queuedata;
+plug_device:
+	spin_unlock_irq(&hwgroup->lock);
+	spin_lock_irq(q->queue_lock);
 
-	ide_do_request(HWGROUP(drive), IDE_NO_IRQ);
+	if (!elv_queue_empty(q))
+		blk_plug_device(q);
 }
 
 /*
@@ -983,6 +863,17 @@ out:
 	return ret;
 }
 
+static void ide_plug_device(ide_drive_t *drive)
+{
+	struct request_queue *q = drive->queue;
+	unsigned long flags;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+	if (!elv_queue_empty(q))
+		blk_plug_device(q);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
 /**
  *	ide_timer_expiry	-	handle lack of an IDE interrupt
  *	@data: timer callback magic (hwgroup)
@@ -1000,10 +891,12 @@ out:
 void ide_timer_expiry (unsigned long data)
 {
 	ide_hwgroup_t	*hwgroup = (ide_hwgroup_t *) data;
+	ide_drive_t	*uninitialized_var(drive);
 	ide_handler_t	*handler;
 	ide_expiry_t	*expiry;
 	unsigned long	flags;
 	unsigned long	wait = -1;
+	int		plug_device = 0;
 
 	spin_lock_irqsave(&hwgroup->lock, flags);
 
@@ -1015,22 +908,15 @@ void ide_timer_expiry (unsigned long data)
 		 * or we were "sleeping" to give other devices a chance.
 		 * Either way, we don't really want to complain about anything.
 		 */
-		if (hwgroup->sleeping) {
-			hwgroup->sleeping = 0;
-			hwgroup->busy = 0;
-		}
 	} else {
-		ide_drive_t *drive = hwgroup->drive;
+		drive = hwgroup->drive;
 		if (!drive) {
 			printk(KERN_ERR "ide_timer_expiry: hwgroup->drive was NULL\n");
 			hwgroup->handler = NULL;
 		} else {
 			ide_hwif_t *hwif;
 			ide_startstop_t startstop = ide_stopped;
-			if (!hwgroup->busy) {
-				hwgroup->busy = 1;	/* paranoia */
-				printk(KERN_ERR "%s: ide_timer_expiry: hwgroup->busy was 0 ??\n", drive->name);
-			}
+
 			if ((expiry = hwgroup->expiry) != NULL) {
 				/* continue */
 				if ((wait = expiry(drive)) > 0) {
@@ -1071,15 +957,18 @@ void ide_timer_expiry (unsigned long data)
 					ide_error(drive, "irq timeout",
 						  hwif->tp_ops->read_status(hwif));
 			}
-			drive->service_time = jiffies - drive->service_start;
 			spin_lock_irq(&hwgroup->lock);
 			enable_irq(hwif->irq);
-			if (startstop == ide_stopped)
-				hwgroup->busy = 0;
+			if (startstop == ide_stopped) {
+				ide_unlock_hwgroup(hwgroup);
+				plug_device = 1;
+			}
 		}
 	}
-	ide_do_request(hwgroup, IDE_NO_IRQ);
 	spin_unlock_irqrestore(&hwgroup->lock, flags);
+
+	if (plug_device)
+		ide_plug_device(drive);
 }
 
 /**
@@ -1173,10 +1062,11 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 	unsigned long flags;
 	ide_hwgroup_t *hwgroup = (ide_hwgroup_t *)dev_id;
 	ide_hwif_t *hwif = hwgroup->hwif;
-	ide_drive_t *drive;
+	ide_drive_t *uninitialized_var(drive);
 	ide_handler_t *handler;
 	ide_startstop_t startstop;
 	irqreturn_t irq_ret = IRQ_NONE;
+	int plug_device = 0;
 
 	spin_lock_irqsave(&hwgroup->lock, flags);
 
@@ -1241,10 +1131,6 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 		 */
 		goto out;
 
-	if (!hwgroup->busy) {
-		hwgroup->busy = 1;	/* paranoia */
-		printk(KERN_ERR "%s: ide_intr: hwgroup->busy was 0 ??\n", drive->name);
-	}
 	hwgroup->handler = NULL;
 	hwgroup->req_gen++;
 	del_timer(&hwgroup->timer);
@@ -1267,20 +1153,22 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 	 * same irq as is currently being serviced here, and Linux
 	 * won't allow another of the same (on any CPU) until we return.
 	 */
-	drive->service_time = jiffies - drive->service_start;
 	if (startstop == ide_stopped) {
 		if (hwgroup->handler == NULL) {	/* paranoia */
-			hwgroup->busy = 0;
-			ide_do_request(hwgroup, hwif->irq);
-		} else {
-			printk(KERN_ERR "%s: ide_intr: huh? expected NULL handler "
-				"on exit\n", drive->name);
-		}
+			ide_unlock_hwgroup(hwgroup);
+			plug_device = 1;
+		} else
+			printk(KERN_ERR "%s: %s: huh? expected NULL handler "
+					"on exit\n", __func__, drive->name);
 	}
 out_handled:
 	irq_ret = IRQ_HANDLED;
 out:
 	spin_unlock_irqrestore(&hwgroup->lock, flags);
+
+	if (plug_device)
+		ide_plug_device(drive);
+
 	return irq_ret;
 }
 
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index 28232c6..1be263e 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -95,8 +95,7 @@ static int ide_set_nice_ioctl(ide_drive_t *drive, unsigned long arg)
 		return -EPERM;
 
 	if (((arg >> IDE_NICE_DSC_OVERLAP) & 1) &&
-	    (drive->media != ide_tape ||
-	     (drive->dev_flags & IDE_DFLAG_SCSI)))
+	    (drive->media != ide_tape))
 		return -EPERM;
 
 	if ((arg >> IDE_NICE_DSC_OVERLAP) & 1)
diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c
index 63d01c5..678454a 100644
--- a/drivers/ide/ide-park.c
+++ b/drivers/ide/ide-park.c
@@ -16,16 +16,19 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout)
 	spin_lock_irq(&hwgroup->lock);
 	if (drive->dev_flags & IDE_DFLAG_PARKED) {
 		int reset_timer = time_before(timeout, drive->sleep);
+		int start_queue = 0;
 
 		drive->sleep = timeout;
 		wake_up_all(&ide_park_wq);
-		if (reset_timer && hwgroup->sleeping &&
-		    del_timer(&hwgroup->timer)) {
-			hwgroup->sleeping = 0;
-			hwgroup->busy = 0;
+		if (reset_timer && del_timer(&hwgroup->timer))
+			start_queue = 1;
+		spin_unlock_irq(&hwgroup->lock);
+
+		if (start_queue) {
+			spin_lock_irq(q->queue_lock);
 			blk_start_queueing(q);
+			spin_unlock_irq(q->queue_lock);
 		}
-		spin_unlock_irq(&hwgroup->lock);
 		return;
 	}
 	spin_unlock_irq(&hwgroup->lock);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index a64ec25..c5adb7b 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -101,6 +101,82 @@ static void ide_disk_init_mult_count(ide_drive_t *drive)
 	}
 }
 
+static void ide_classify_ata_dev(ide_drive_t *drive)
+{
+	u16 *id = drive->id;
+	char *m = (char *)&id[ATA_ID_PROD];
+	int is_cfa = ata_id_is_cfa(id);
+
+	/* CF devices are *not* removable in Linux definition of the term */
+	if (is_cfa == 0 && (id[ATA_ID_CONFIG] & (1 << 7)))
+		drive->dev_flags |= IDE_DFLAG_REMOVABLE;
+
+	drive->media = ide_disk;
+
+	if (!ata_id_has_unload(drive->id))
+		drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
+
+	printk(KERN_INFO "%s: %s, %s DISK drive\n", drive->name, m,
+		is_cfa ? "CFA" : "ATA");
+}
+
+static void ide_classify_atapi_dev(ide_drive_t *drive)
+{
+	u16 *id = drive->id;
+	char *m = (char *)&id[ATA_ID_PROD];
+	u8 type = (id[ATA_ID_CONFIG] >> 8) & 0x1f;
+
+	printk(KERN_INFO "%s: %s, ATAPI ", drive->name, m);
+	switch (type) {
+	case ide_floppy:
+		if (!strstr(m, "CD-ROM")) {
+			if (!strstr(m, "oppy") &&
+			    !strstr(m, "poyp") &&
+			    !strstr(m, "ZIP"))
+				printk(KERN_CONT "cdrom or floppy?, assuming ");
+			if (drive->media != ide_cdrom) {
+				printk(KERN_CONT "FLOPPY");
+				drive->dev_flags |= IDE_DFLAG_REMOVABLE;
+				break;
+			}
+		}
+		/* Early cdrom models used zero */
+		type = ide_cdrom;
+	case ide_cdrom:
+		drive->dev_flags |= IDE_DFLAG_REMOVABLE;
+#ifdef CONFIG_PPC
+		/* kludge for Apple PowerBook internal zip */
+		if (!strstr(m, "CD-ROM") && strstr(m, "ZIP")) {
+			printk(KERN_CONT "FLOPPY");
+			type = ide_floppy;
+			break;
+		}
+#endif
+		printk(KERN_CONT "CD/DVD-ROM");
+		break;
+	case ide_tape:
+		printk(KERN_CONT "TAPE");
+		break;
+	case ide_optical:
+		printk(KERN_CONT "OPTICAL");
+		drive->dev_flags |= IDE_DFLAG_REMOVABLE;
+		break;
+	default:
+		printk(KERN_CONT "UNKNOWN (type %d)", type);
+		break;
+	}
+
+	printk(KERN_CONT " drive\n");
+	drive->media = type;
+	/* an ATAPI device ignores DRDY */
+	drive->ready_stat = 0;
+	if (ata_id_cdb_intr(id))
+		drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
+	drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
+	/* we don't do head unloading on ATAPI devices */
+	drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
+}
+
 /**
  *	do_identify	-	identify a drive
  *	@drive: drive to identify 
@@ -117,7 +193,7 @@ static void do_identify(ide_drive_t *drive, u8 cmd)
 	u16 *id = drive->id;
 	char *m = (char *)&id[ATA_ID_PROD];
 	unsigned long flags;
-	int bswap = 1, is_cfa;
+	int bswap = 1;
 
 	/* local CPU only; some systems need this */
 	local_irq_save(flags);
@@ -154,91 +230,23 @@ static void do_identify(ide_drive_t *drive, u8 cmd)
 	if (strstr(m, "E X A B Y T E N E S T"))
 		goto err_misc;
 
-	printk(KERN_INFO "%s: %s, ", drive->name, m);
-
 	drive->dev_flags |= IDE_DFLAG_PRESENT;
 	drive->dev_flags &= ~IDE_DFLAG_DEAD;
 
 	/*
 	 * Check for an ATAPI device
 	 */
-	if (cmd == ATA_CMD_ID_ATAPI) {
-		u8 type = (id[ATA_ID_CONFIG] >> 8) & 0x1f;
-
-		printk(KERN_CONT "ATAPI ");
-		switch (type) {
-			case ide_floppy:
-				if (!strstr(m, "CD-ROM")) {
-					if (!strstr(m, "oppy") &&
-					    !strstr(m, "poyp") &&
-					    !strstr(m, "ZIP"))
-						printk(KERN_CONT "cdrom or floppy?, assuming ");
-					if (drive->media != ide_cdrom) {
-						printk(KERN_CONT "FLOPPY");
-						drive->dev_flags |= IDE_DFLAG_REMOVABLE;
-						break;
-					}
-				}
-				/* Early cdrom models used zero */
-				type = ide_cdrom;
-			case ide_cdrom:
-				drive->dev_flags |= IDE_DFLAG_REMOVABLE;
-#ifdef CONFIG_PPC
-				/* kludge for Apple PowerBook internal zip */
-				if (!strstr(m, "CD-ROM") && strstr(m, "ZIP")) {
-					printk(KERN_CONT "FLOPPY");
-					type = ide_floppy;
-					break;
-				}
-#endif
-				printk(KERN_CONT "CD/DVD-ROM");
-				break;
-			case ide_tape:
-				printk(KERN_CONT "TAPE");
-				break;
-			case ide_optical:
-				printk(KERN_CONT "OPTICAL");
-				drive->dev_flags |= IDE_DFLAG_REMOVABLE;
-				break;
-			default:
-				printk(KERN_CONT "UNKNOWN (type %d)", type);
-				break;
-		}
-		printk(KERN_CONT " drive\n");
-		drive->media = type;
-		/* an ATAPI device ignores DRDY */
-		drive->ready_stat = 0;
-		if (ata_id_cdb_intr(id))
-			drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
-		drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
-		/* we don't do head unloading on ATAPI devices */
-		drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
-		return;
-	}
-
+	if (cmd == ATA_CMD_ID_ATAPI)
+		ide_classify_atapi_dev(drive);
+	else
 	/*
 	 * Not an ATAPI device: looks like a "regular" hard disk
 	 */
-
-	is_cfa = ata_id_is_cfa(id);
-
-	/* CF devices are *not* removable in Linux definition of the term */
-	if (is_cfa == 0 && (id[ATA_ID_CONFIG] & (1 << 7)))
-		drive->dev_flags |= IDE_DFLAG_REMOVABLE;
-
-	drive->media = ide_disk;
-
-	if (!ata_id_has_unload(drive->id))
-		drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
-
-	printk(KERN_CONT "%s DISK drive\n", is_cfa ? "CFA" : "ATA");
-
+		ide_classify_ata_dev(drive);
 	return;
-
 err_misc:
 	kfree(id);
 	drive->dev_flags &= ~IDE_DFLAG_PRESENT;
-	return;
 }
 
 /**
@@ -641,14 +649,9 @@ static int ide_register_port(ide_hwif_t *hwif)
 	/* register with global device tree */
 	dev_set_name(&hwif->gendev, hwif->name);
 	hwif->gendev.driver_data = hwif;
-	if (hwif->gendev.parent == NULL) {
-		if (hwif->dev)
-			hwif->gendev.parent = hwif->dev;
-		else
-			/* Would like to do = &device_legacy */
-			hwif->gendev.parent = NULL;
-	}
+	hwif->gendev.parent = hwif->dev;
 	hwif->gendev.release = hwif_release_dev;
+
 	ret = device_register(&hwif->gendev);
 	if (ret < 0) {
 		printk(KERN_WARNING "IDE: %s: device_register error: %d\n",
@@ -878,8 +881,7 @@ static int ide_init_queue(ide_drive_t *drive)
 	 *	do not.
 	 */
 
-	q = blk_init_queue_node(do_ide_request, &hwif->hwgroup->lock,
-				hwif_to_node(hwif));
+	q = blk_init_queue_node(do_ide_request, NULL, hwif_to_node(hwif));
 	if (!q)
 		return 1;
 
@@ -1139,8 +1141,6 @@ static struct kobject *ata_probe(dev_t dev, int *part, void *data)
 
 	if (drive->media == ide_disk)
 		request_module("ide-disk");
-	if (drive->dev_flags & IDE_DFLAG_SCSI)
-		request_module("ide-scsi");
 	if (drive->media == ide_cdrom || drive->media == ide_optical)
 		request_module("ide-cd");
 	if (drive->media == ide_tape)
@@ -1417,58 +1417,6 @@ static void ide_port_cable_detect(ide_hwif_t *hwif)
 	}
 }
 
-static ssize_t store_delete_devices(struct device *portdev,
-				    struct device_attribute *attr,
-				    const char *buf, size_t n)
-{
-	ide_hwif_t *hwif = dev_get_drvdata(portdev);
-
-	if (strncmp(buf, "1", n))
-		return -EINVAL;
-
-	ide_port_unregister_devices(hwif);
-
-	return n;
-};
-
-static DEVICE_ATTR(delete_devices, S_IWUSR, NULL, store_delete_devices);
-
-static ssize_t store_scan(struct device *portdev,
-			  struct device_attribute *attr,
-			  const char *buf, size_t n)
-{
-	ide_hwif_t *hwif = dev_get_drvdata(portdev);
-
-	if (strncmp(buf, "1", n))
-		return -EINVAL;
-
-	ide_port_unregister_devices(hwif);
-	ide_port_scan(hwif);
-
-	return n;
-};
-
-static DEVICE_ATTR(scan, S_IWUSR, NULL, store_scan);
-
-static struct device_attribute *ide_port_attrs[] = {
-	&dev_attr_delete_devices,
-	&dev_attr_scan,
-	NULL
-};
-
-static int ide_sysfs_register_port(ide_hwif_t *hwif)
-{
-	int i, uninitialized_var(rc);
-
-	for (i = 0; ide_port_attrs[i]; i++) {
-		rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
-		if (rc)
-			break;
-	}
-
-	return rc;
-}
-
 static unsigned int ide_indexes;
 
 /**
@@ -1655,9 +1603,6 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 		if (hwif == NULL)
 			continue;
 
-		if (hwif->chipset == ide_unknown)
-			hwif->chipset = ide_generic;
-
 		if (hwif->present)
 			hwif_register_devices(hwif);
 	}
diff --git a/drivers/ide/ide-sysfs.c b/drivers/ide/ide-sysfs.c
new file mode 100644
index 0000000..883ffac
--- /dev/null
+++ b/drivers/ide/ide-sysfs.c
@@ -0,0 +1,125 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+
+char *ide_media_string(ide_drive_t *drive)
+{
+	switch (drive->media) {
+	case ide_disk:
+		return "disk";
+	case ide_cdrom:
+		return "cdrom";
+	case ide_tape:
+		return "tape";
+	case ide_floppy:
+		return "floppy";
+	case ide_optical:
+		return "optical";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static ssize_t media_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	ide_drive_t *drive = to_ide_device(dev);
+	return sprintf(buf, "%s\n", ide_media_string(drive));
+}
+
+static ssize_t drivename_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	ide_drive_t *drive = to_ide_device(dev);
+	return sprintf(buf, "%s\n", drive->name);
+}
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	ide_drive_t *drive = to_ide_device(dev);
+	return sprintf(buf, "ide:m-%s\n", ide_media_string(drive));
+}
+
+static ssize_t model_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	ide_drive_t *drive = to_ide_device(dev);
+	return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_PROD]);
+}
+
+static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	ide_drive_t *drive = to_ide_device(dev);
+	return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_FW_REV]);
+}
+
+static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	ide_drive_t *drive = to_ide_device(dev);
+	return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_SERNO]);
+}
+
+struct device_attribute ide_dev_attrs[] = {
+	__ATTR_RO(media),
+	__ATTR_RO(drivename),
+	__ATTR_RO(modalias),
+	__ATTR_RO(model),
+	__ATTR_RO(firmware),
+	__ATTR(serial, 0400, serial_show, NULL),
+	__ATTR(unload_heads, 0644, ide_park_show, ide_park_store),
+	__ATTR_NULL
+};
+
+static ssize_t store_delete_devices(struct device *portdev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t n)
+{
+	ide_hwif_t *hwif = dev_get_drvdata(portdev);
+
+	if (strncmp(buf, "1", n))
+		return -EINVAL;
+
+	ide_port_unregister_devices(hwif);
+
+	return n;
+};
+
+static DEVICE_ATTR(delete_devices, S_IWUSR, NULL, store_delete_devices);
+
+static ssize_t store_scan(struct device *portdev,
+			  struct device_attribute *attr,
+			  const char *buf, size_t n)
+{
+	ide_hwif_t *hwif = dev_get_drvdata(portdev);
+
+	if (strncmp(buf, "1", n))
+		return -EINVAL;
+
+	ide_port_unregister_devices(hwif);
+	ide_port_scan(hwif);
+
+	return n;
+};
+
+static DEVICE_ATTR(scan, S_IWUSR, NULL, store_scan);
+
+static struct device_attribute *ide_port_attrs[] = {
+	&dev_attr_delete_devices,
+	&dev_attr_scan,
+	NULL
+};
+
+int ide_sysfs_register_port(ide_hwif_t *hwif)
+{
+	int i, uninitialized_var(rc);
+
+	for (i = 0; ide_port_attrs[i]; i++) {
+		rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
+		if (rc)
+			break;
+	}
+
+	return rc;
+}
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a2d470e..5d2aa22 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -694,7 +694,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
 
 	pc->retries++;
 
-	return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
+	return ide_issue_pc(drive);
 }
 
 /* A mode sense command is used to "sense" tape parameters. */
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index f0f09f7..46a2d4c 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -440,81 +440,13 @@ static int ide_bus_match(struct device *dev, struct device_driver *drv)
 	return 1;
 }
 
-static char *media_string(ide_drive_t *drive)
-{
-	switch (drive->media) {
-	case ide_disk:
-		return "disk";
-	case ide_cdrom:
-		return "cdrom";
-	case ide_tape:
-		return "tape";
-	case ide_floppy:
-		return "floppy";
-	case ide_optical:
-		return "optical";
-	default:
-		return "UNKNOWN";
-	}
-}
-
-static ssize_t media_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	ide_drive_t *drive = to_ide_device(dev);
-	return sprintf(buf, "%s\n", media_string(drive));
-}
-
-static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	ide_drive_t *drive = to_ide_device(dev);
-	return sprintf(buf, "%s\n", drive->name);
-}
-
-static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	ide_drive_t *drive = to_ide_device(dev);
-	return sprintf(buf, "ide:m-%s\n", media_string(drive));
-}
-
-static ssize_t model_show(struct device *dev, struct device_attribute *attr,
-			  char *buf)
-{
-	ide_drive_t *drive = to_ide_device(dev);
-	return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_PROD]);
-}
-
-static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
-			     char *buf)
-{
-	ide_drive_t *drive = to_ide_device(dev);
-	return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_FW_REV]);
-}
-
-static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
-			   char *buf)
-{
-	ide_drive_t *drive = to_ide_device(dev);
-	return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_SERNO]);
-}
-
-static struct device_attribute ide_dev_attrs[] = {
-	__ATTR_RO(media),
-	__ATTR_RO(drivename),
-	__ATTR_RO(modalias),
-	__ATTR_RO(model),
-	__ATTR_RO(firmware),
-	__ATTR(serial, 0400, serial_show, NULL),
-	__ATTR(unload_heads, 0644, ide_park_show, ide_park_store),
-	__ATTR_NULL
-};
-
 static int ide_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	ide_drive_t *drive = to_ide_device(dev);
 
-	add_uevent_var(env, "MEDIA=%s", media_string(drive));
+	add_uevent_var(env, "MEDIA=%s", ide_media_string(drive));
 	add_uevent_var(env, "DRIVENAME=%s", drive->name);
-	add_uevent_var(env, "MODALIAS=ide:m-%s", media_string(drive));
+	add_uevent_var(env, "MODALIAS=ide:m-%s", ide_media_string(drive));
 	return 0;
 }
 
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index 13b63e7..b4ef218 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -216,16 +216,17 @@ static const struct ide_tp_ops tx4938ide_tp_ops = {
 #endif	/* __BIG_ENDIAN */
 
 static const struct ide_port_ops tx4938ide_port_ops = {
-	.set_pio_mode = tx4938ide_set_pio_mode,
+	.set_pio_mode		= tx4938ide_set_pio_mode,
 };
 
 static const struct ide_port_info tx4938ide_port_info __initdata = {
-	.port_ops = &tx4938ide_port_ops,
+	.port_ops		= &tx4938ide_port_ops,
 #ifdef __BIG_ENDIAN
-	.tp_ops = &tx4938ide_tp_ops,
+	.tp_ops			= &tx4938ide_tp_ops,
 #endif
-	.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
-	.pio_mask = ATA_PIO5,
+	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+	.pio_mask		= ATA_PIO5,
+	.chipset		= ide_generic,
 };
 
 static int __init tx4938ide_probe(struct platform_device *pdev)
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 97cd9e0..4a8c5a2 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -623,33 +623,34 @@ static const struct ide_tp_ops tx4939ide_tp_ops = {
 #endif	/* __LITTLE_ENDIAN */
 
 static const struct ide_port_ops tx4939ide_port_ops = {
-	.set_pio_mode = tx4939ide_set_pio_mode,
-	.set_dma_mode = tx4939ide_set_dma_mode,
-	.clear_irq = tx4939ide_clear_irq,
-	.cable_detect = tx4939ide_cable_detect,
+	.set_pio_mode		= tx4939ide_set_pio_mode,
+	.set_dma_mode		= tx4939ide_set_dma_mode,
+	.clear_irq		= tx4939ide_clear_irq,
+	.cable_detect		= tx4939ide_cable_detect,
 };
 
 static const struct ide_dma_ops tx4939ide_dma_ops = {
-	.dma_host_set = tx4939ide_dma_host_set,
-	.dma_setup = tx4939ide_dma_setup,
-	.dma_exec_cmd = ide_dma_exec_cmd,
-	.dma_start = ide_dma_start,
-	.dma_end = tx4939ide_dma_end,
-	.dma_test_irq = tx4939ide_dma_test_irq,
-	.dma_lost_irq = ide_dma_lost_irq,
-	.dma_timeout = ide_dma_timeout,
+	.dma_host_set		= tx4939ide_dma_host_set,
+	.dma_setup		= tx4939ide_dma_setup,
+	.dma_exec_cmd		= ide_dma_exec_cmd,
+	.dma_start		= ide_dma_start,
+	.dma_end		= tx4939ide_dma_end,
+	.dma_test_irq		= tx4939ide_dma_test_irq,
+	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timeout		= ide_dma_timeout,
 };
 
 static const struct ide_port_info tx4939ide_port_info __initdata = {
-	.init_hwif = tx4939ide_init_hwif,
-	.init_dma = tx4939ide_init_dma,
-	.port_ops = &tx4939ide_port_ops,
-	.dma_ops = &tx4939ide_dma_ops,
-	.tp_ops = &tx4939ide_tp_ops,
-	.host_flags = IDE_HFLAG_MMIO,
-	.pio_mask = ATA_PIO4,
-	.mwdma_mask = ATA_MWDMA2,
-	.udma_mask = ATA_UDMA5,
+	.init_hwif		= tx4939ide_init_hwif,
+	.init_dma		= tx4939ide_init_dma,
+	.port_ops		= &tx4939ide_port_ops,
+	.dma_ops		= &tx4939ide_dma_ops,
+	.tp_ops			= &tx4939ide_tp_ops,
+	.host_flags		= IDE_HFLAG_MMIO,
+	.pio_mask		= ATA_PIO4,
+	.mwdma_mask		= ATA_MWDMA2,
+	.udma_mask		= ATA_UDMA5,
+	.chipset		= ide_generic,
 };
 
 static int __init tx4939ide_probe(struct platform_device *pdev)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 152d4aa..b732297 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -21,7 +21,7 @@ config SCSI
 	  You also need to say Y here if you have a device which speaks
 	  the SCSI protocol.  Examples of this include the parallel port
 	  version of the IOMEGA ZIP drive, USB storage devices, Fibre
-	  Channel, FireWire storage and the IDE-SCSI emulation driver.
+	  Channel, and FireWire storage.
 
 	  To compile this driver as a module, choose M here and read
 	  <file:Documentation/scsi/scsi.txt>.
@@ -101,9 +101,9 @@ config CHR_DEV_OSST
 	---help---
 	  The OnStream SC-x0 SCSI tape drives cannot be driven by the
 	  standard st driver, but instead need this special osst driver and
-	  use the  /dev/osstX char device nodes (major 206).  Via usb-storage
-	  and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
-	  as well.  Note that there is also a second generation of OnStream
+	  use the  /dev/osstX char device nodes (major 206).  Via usb-storage,
+	  you may be able to drive the USB-x0 and DI-x0 drives as well.
+	  Note that there is also a second generation of OnStream
 	  tape drives (ADR-x0) that supports the standard SCSI-2 commands for
 	  tapes (QIC-157) and can be driven by the standard driver st.
 	  For more information, you may have a look at the SCSI-HOWTO
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 1410697..7461eb0 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -105,7 +105,6 @@ obj-$(CONFIG_SCSI_GDTH)		+= gdth.o
 obj-$(CONFIG_SCSI_INITIO)	+= initio.o
 obj-$(CONFIG_SCSI_INIA100)	+= a100u2w.o
 obj-$(CONFIG_SCSI_QLOGICPTI)	+= qlogicpti.o
-obj-$(CONFIG_BLK_DEV_IDESCSI)	+= ide-scsi.o
 obj-$(CONFIG_SCSI_MESH)		+= mesh.o
 obj-$(CONFIG_SCSI_MAC53C94)	+= mac53c94.o
 obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
deleted file mode 100644
index c24140a..0000000
--- a/drivers/scsi/ide-scsi.c
+++ /dev/null
@@ -1,840 +0,0 @@
-/*
- * Copyright (C) 1996-1999  Gadi Oxman <gadio@netvision.net.il>
- * Copyright (C) 2004-2005  Bartlomiej Zolnierkiewicz
- */
-
-/*
- * Emulation of a SCSI host adapter for IDE ATAPI devices.
- *
- * With this driver, one can use the Linux SCSI drivers instead of the
- * native IDE ATAPI drivers.
- *
- * Ver 0.1   Dec  3 96   Initial version.
- * Ver 0.2   Jan 26 97   Fixed bug in cleanup_module() and added emulation
- *                        of MODE_SENSE_6/MODE_SELECT_6 for cdroms. Thanks
- *                        to Janos Farkas for pointing this out.
- *                       Avoid using bitfields in structures for m68k.
- *                       Added Scatter/Gather and DMA support.
- * Ver 0.4   Dec  7 97   Add support for ATAPI PD/CD drives.
- *                       Use variable timeout for each command.
- * Ver 0.5   Jan  2 98   Fix previous PD/CD support.
- *                       Allow disabling of SCSI-6 to SCSI-10 transformation.
- * Ver 0.6   Jan 27 98   Allow disabling of SCSI command translation layer
- *                        for access through /dev/sg.
- *                       Fix MODE_SENSE_6/MODE_SELECT_6/INQUIRY translation.
- * Ver 0.7   Dec 04 98   Ignore commands where lun != 0 to avoid multiple
- *                        detection of devices with CONFIG_SCSI_MULTI_LUN
- * Ver 0.8   Feb 05 99   Optical media need translation too. Reverse 0.7.
- * Ver 0.9   Jul 04 99   Fix a bug in SG_SET_TRANSFORM.
- * Ver 0.91  Jun 10 02   Fix "off by one" error in transforms
- * Ver 0.92  Dec 31 02   Implement new SCSI mid level API
- */
-
-#define IDESCSI_VERSION "0.92"
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/ide.h>
-#include <linux/scatterlist.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/sg.h>
-
-#define IDESCSI_DEBUG_LOG		0
-
-#if IDESCSI_DEBUG_LOG
-#define debug_log(fmt, args...) \
-	printk(KERN_INFO "ide-scsi: " fmt, ## args)
-#else
-#define debug_log(fmt, args...) do {} while (0)
-#endif
-
-/*
- *	SCSI command transformation layer
- */
-#define IDESCSI_SG_TRANSFORM		1	/* /dev/sg transformation */
-
-/*
- *	Log flags
- */
-#define IDESCSI_LOG_CMD			0	/* Log SCSI commands */
-
-typedef struct ide_scsi_obj {
-	ide_drive_t		*drive;
-	ide_driver_t		*driver;
-	struct gendisk		*disk;
-	struct Scsi_Host	*host;
-
-	unsigned long transform;		/* SCSI cmd translation layer */
-	unsigned long log;			/* log flags */
-} idescsi_scsi_t;
-
-static DEFINE_MUTEX(idescsi_ref_mutex);
-/* Set by module param to skip cd */
-static int idescsi_nocd;
-
-#define ide_scsi_g(disk) \
-	container_of((disk)->private_data, struct ide_scsi_obj, driver)
-
-static struct ide_scsi_obj *ide_scsi_get(struct gendisk *disk)
-{
-	struct ide_scsi_obj *scsi = NULL;
-
-	mutex_lock(&idescsi_ref_mutex);
-	scsi = ide_scsi_g(disk);
-	if (scsi) {
-		if (ide_device_get(scsi->drive))
-			scsi = NULL;
-		else
-			scsi_host_get(scsi->host);
-	}
-	mutex_unlock(&idescsi_ref_mutex);
-	return scsi;
-}
-
-static void ide_scsi_put(struct ide_scsi_obj *scsi)
-{
-	ide_drive_t *drive = scsi->drive;
-
-	mutex_lock(&idescsi_ref_mutex);
-	scsi_host_put(scsi->host);
-	ide_device_put(drive);
-	mutex_unlock(&idescsi_ref_mutex);
-}
-
-static inline idescsi_scsi_t *scsihost_to_idescsi(struct Scsi_Host *host)
-{
-	return (idescsi_scsi_t*) (&host[1]);
-}
-
-static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive)
-{
-	return scsihost_to_idescsi(ide_drive->driver_data);
-}
-
-static void ide_scsi_hex_dump(u8 *data, int len)
-{
-	print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
-}
-
-static int idescsi_end_request(ide_drive_t *, int, int);
-
-static void ide_scsi_callback(ide_drive_t *drive, int dsc)
-{
-	idescsi_scsi_t *scsi = drive_to_idescsi(drive);
-	struct ide_atapi_pc *pc = drive->pc;
-
-	if (pc->flags & PC_FLAG_TIMEDOUT)
-		debug_log("%s: got timed out packet %lu at %lu\n", __func__,
-			  pc->scsi_cmd->serial_number, jiffies);
-		/* end this request now - scsi should retry it*/
-	else if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
-		printk(KERN_INFO "Packet command completed, %d bytes"
-				 " transferred\n", pc->xferred);
-
-	idescsi_end_request(drive, 1, 0);
-}
-
-static int idescsi_check_condition(ide_drive_t *drive,
-		struct request *failed_cmd)
-{
-	idescsi_scsi_t *scsi = drive_to_idescsi(drive);
-	struct ide_atapi_pc   *pc;
-	struct request *rq;
-	u8             *buf;
-
-	/* stuff a sense request in front of our current request */
-	pc = kzalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC);
-	rq = blk_get_request(drive->queue, READ, GFP_ATOMIC);
-	buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC);
-	if (!pc || !rq || !buf) {
-		kfree(buf);
-		if (rq)
-			blk_put_request(rq);
-		kfree(pc);
-		return -ENOMEM;
-	}
-	rq->special = (char *) pc;
-	pc->rq = rq;
-	pc->buf = buf;
-	pc->c[0] = REQUEST_SENSE;
-	pc->c[4] = pc->req_xfer = pc->buf_size = SCSI_SENSE_BUFFERSIZE;
-	rq->cmd_type = REQ_TYPE_SENSE;
-	rq->cmd_flags |= REQ_PREEMPT;
-	pc->timeout = jiffies + WAIT_READY;
-	/* NOTE! Save the failed packet command in "rq->buffer" */
-	rq->buffer = (void *) failed_cmd->special;
-	pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd;
-	if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
-		printk ("ide-scsi: %s: queue cmd = ", drive->name);
-		ide_scsi_hex_dump(pc->c, 6);
-	}
-	rq->rq_disk = scsi->disk;
-	rq->ref_count++;
-	memcpy(rq->cmd, pc->c, 12);
-	ide_do_drive_cmd(drive, rq);
-	return 0;
-}
-
-static ide_startstop_t
-idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
-		/* force an abort */
-		hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE);
-
-	rq->errors++;
-
-	idescsi_end_request(drive, 0, 0);
-
-	return ide_stopped;
-}
-
-static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
-{
-	idescsi_scsi_t *scsi = drive_to_idescsi(drive);
-	struct request *rq = HWGROUP(drive)->rq;
-	struct ide_atapi_pc *pc = (struct ide_atapi_pc *) rq->special;
-	int log = test_bit(IDESCSI_LOG_CMD, &scsi->log);
-	struct Scsi_Host *host;
-	int errors = rq->errors;
-	unsigned long flags;
-
-	if (!blk_special_request(rq) && !blk_sense_request(rq)) {
-		ide_end_request(drive, uptodate, nrsecs);
-		return 0;
-	}
-	ide_end_drive_cmd (drive, 0, 0);
-	if (blk_sense_request(rq)) {
-		struct ide_atapi_pc *opc = (struct ide_atapi_pc *) rq->buffer;
-		if (log) {
-			printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number);
-			ide_scsi_hex_dump(pc->buf, 16);
-		}
-		memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buf,
-			SCSI_SENSE_BUFFERSIZE);
-		kfree(pc->buf);
-		kfree(pc);
-		blk_put_request(rq);
-		pc = opc;
-		rq = pc->rq;
-		pc->scsi_cmd->result = (CHECK_CONDITION << 1) |
-				(((pc->flags & PC_FLAG_TIMEDOUT) ?
-				  DID_TIME_OUT :
-				  DID_OK) << 16);
-	} else if (pc->flags & PC_FLAG_TIMEDOUT) {
-		if (log)
-			printk (KERN_WARNING "ide-scsi: %s: timed out for %lu\n",
-					drive->name, pc->scsi_cmd->serial_number);
-		pc->scsi_cmd->result = DID_TIME_OUT << 16;
-	} else if (errors >= ERROR_MAX) {
-		pc->scsi_cmd->result = DID_ERROR << 16;
-		if (log)
-			printk ("ide-scsi: %s: I/O error for %lu\n", drive->name, pc->scsi_cmd->serial_number);
-	} else if (errors) {
-		if (log)
-			printk ("ide-scsi: %s: check condition for %lu\n", drive->name, pc->scsi_cmd->serial_number);
-		if (!idescsi_check_condition(drive, rq))
-			/* we started a request sense, so we'll be back, exit for now */
-			return 0;
-		pc->scsi_cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16);
-	} else {
-		pc->scsi_cmd->result = DID_OK << 16;
-	}
-	host = pc->scsi_cmd->device->host;
-	spin_lock_irqsave(host->host_lock, flags);
-	pc->done(pc->scsi_cmd);
-	spin_unlock_irqrestore(host->host_lock, flags);
-	kfree(pc);
-	blk_put_request(rq);
-	drive->pc = NULL;
-	return 0;
-}
-
-static inline int idescsi_set_direction(struct ide_atapi_pc *pc)
-{
-	switch (pc->c[0]) {
-		case READ_6: case READ_10: case READ_12:
-			pc->flags &= ~PC_FLAG_WRITING;
-			return 0;
-		case WRITE_6: case WRITE_10: case WRITE_12:
-			pc->flags |= PC_FLAG_WRITING;
-			return 0;
-		default:
-			return 1;
-	}
-}
-
-static int idescsi_map_sg(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct scatterlist *sg, *scsi_sg;
-	int segments;
-
-	if (!pc->req_xfer || pc->req_xfer % 1024)
-		return 1;
-
-	if (idescsi_set_direction(pc))
-		return 1;
-
-	sg = hwif->sg_table;
-	scsi_sg = scsi_sglist(pc->scsi_cmd);
-	segments = scsi_sg_count(pc->scsi_cmd);
-
-	if (segments > hwif->sg_max_nents)
-		return 1;
-
-	hwif->sg_nents = segments;
-	memcpy(sg, scsi_sg, sizeof(*sg) * segments);
-
-	return 0;
-}
-
-static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
-		struct ide_atapi_pc *pc)
-{
-	/* Set the current packet command */
-	drive->pc = pc;
-
-	return ide_issue_pc(drive, ide_scsi_get_timeout(pc), ide_scsi_expiry);
-}
-
-/*
- *	idescsi_do_request is our request handling function.
- */
-static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *rq, sector_t block)
-{
-	debug_log("dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,
-		  rq->cmd[0], rq->errors);
-	debug_log("sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",
-		  rq->sector, rq->nr_sectors, rq->current_nr_sectors);
-
-	if (blk_sense_request(rq) || blk_special_request(rq)) {
-		struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special;
-
-		if ((drive->dev_flags & IDE_DFLAG_USING_DMA) &&
-		    idescsi_map_sg(drive, pc) == 0)
-			pc->flags |= PC_FLAG_DMA_OK;
-
-		return idescsi_issue_pc(drive, pc);
-	}
-	blk_dump_rq_flags(rq, "ide-scsi: unsup command");
-	idescsi_end_request (drive, 0, 0);
-	return ide_stopped;
-}
-
-#ifdef CONFIG_IDE_PROC_FS
-static ide_proc_entry_t idescsi_proc[] = {
-	{ "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL },
-	{ NULL, 0, NULL, NULL }
-};
-
-#define ide_scsi_devset_get(name, field) \
-static int get_##name(ide_drive_t *drive) \
-{ \
-	idescsi_scsi_t *scsi = drive_to_idescsi(drive); \
-	return scsi->field; \
-}
-
-#define ide_scsi_devset_set(name, field) \
-static int set_##name(ide_drive_t *drive, int arg) \
-{ \
-	idescsi_scsi_t *scsi = drive_to_idescsi(drive); \
-	scsi->field = arg; \
-	return 0; \
-}
-
-#define ide_scsi_devset_rw_field(_name, _field) \
-ide_scsi_devset_get(_name, _field); \
-ide_scsi_devset_set(_name, _field); \
-IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name);
-
-ide_devset_rw_field(bios_cyl, bios_cyl);
-ide_devset_rw_field(bios_head, bios_head);
-ide_devset_rw_field(bios_sect, bios_sect);
-
-ide_scsi_devset_rw_field(transform, transform);
-ide_scsi_devset_rw_field(log, log);
-
-static const struct ide_proc_devset idescsi_settings[] = {
-	IDE_PROC_DEVSET(bios_cyl,  0, 1023),
-	IDE_PROC_DEVSET(bios_head, 0,  255),
-	IDE_PROC_DEVSET(bios_sect, 0,	63),
-	IDE_PROC_DEVSET(log,	   0,	 1),
-	IDE_PROC_DEVSET(transform, 0,	 3),
-	{ 0 },
-};
-
-static ide_proc_entry_t *ide_scsi_proc_entries(ide_drive_t *drive)
-{
-	return idescsi_proc;
-}
-
-static const struct ide_proc_devset *ide_scsi_proc_devsets(ide_drive_t *drive)
-{
-	return idescsi_settings;
-}
-#endif
-
-/*
- *	Driver initialization.
- */
-static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi)
-{
-	clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
-#if IDESCSI_DEBUG_LOG
-	set_bit(IDESCSI_LOG_CMD, &scsi->log);
-#endif /* IDESCSI_DEBUG_LOG */
-
-	drive->pc_callback	 = ide_scsi_callback;
-	drive->pc_update_buffers = NULL;
-	drive->pc_io_buffers	 = ide_io_buffers;
-
-	ide_proc_register_driver(drive, scsi->driver);
-}
-
-static void ide_scsi_remove(ide_drive_t *drive)
-{
-	struct Scsi_Host *scsihost = drive->driver_data;
-	struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost);
-	struct gendisk *g = scsi->disk;
-
-	scsi_remove_host(scsihost);
-	ide_proc_unregister_driver(drive, scsi->driver);
-
-	ide_unregister_region(g);
-
-	drive->driver_data = NULL;
-	g->private_data = NULL;
-	put_disk(g);
-
-	ide_scsi_put(scsi);
-
-	drive->dev_flags &= ~IDE_DFLAG_SCSI;
-}
-
-static int ide_scsi_probe(ide_drive_t *);
-
-static ide_driver_t idescsi_driver = {
-	.gen_driver = {
-		.owner		= THIS_MODULE,
-		.name		= "ide-scsi",
-		.bus		= &ide_bus_type,
-	},
-	.probe			= ide_scsi_probe,
-	.remove			= ide_scsi_remove,
-	.version		= IDESCSI_VERSION,
-	.do_request		= idescsi_do_request,
-	.end_request		= idescsi_end_request,
-	.error                  = idescsi_atapi_error,
-#ifdef CONFIG_IDE_PROC_FS
-	.proc_entries		= ide_scsi_proc_entries,
-	.proc_devsets		= ide_scsi_proc_devsets,
-#endif
-};
-
-static int idescsi_ide_open(struct block_device *bdev, fmode_t mode)
-{
-	struct ide_scsi_obj *scsi = ide_scsi_get(bdev->bd_disk);
-
-	if (!scsi)
-		return -ENXIO;
-
-	return 0;
-}
-
-static int idescsi_ide_release(struct gendisk *disk, fmode_t mode)
-{
-	ide_scsi_put(ide_scsi_g(disk));
-	return 0;
-}
-
-static int idescsi_ide_ioctl(struct block_device *bdev, fmode_t mode,
-			unsigned int cmd, unsigned long arg)
-{
-	struct ide_scsi_obj *scsi = ide_scsi_g(bdev->bd_disk);
-	return generic_ide_ioctl(scsi->drive, bdev, cmd, arg);
-}
-
-static struct block_device_operations idescsi_ops = {
-	.owner		= THIS_MODULE,
-	.open		= idescsi_ide_open,
-	.release	= idescsi_ide_release,
-	.locked_ioctl	= idescsi_ide_ioctl,
-};
-
-static int idescsi_slave_configure(struct scsi_device * sdp)
-{
-	/* Configure detected device */
-	sdp->use_10_for_rw = 1;
-	sdp->use_10_for_ms = 1;
-	scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, sdp->host->cmd_per_lun);
-	return 0;
-}
-
-static const char *idescsi_info (struct Scsi_Host *host)
-{
-	return "SCSI host adapter emulation for IDE ATAPI devices";
-}
-
-static int idescsi_ioctl (struct scsi_device *dev, int cmd, void __user *arg)
-{
-	idescsi_scsi_t *scsi = scsihost_to_idescsi(dev->host);
-
-	if (cmd == SG_SET_TRANSFORM) {
-		if (arg)
-			set_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
-		else
-			clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
-		return 0;
-	} else if (cmd == SG_GET_TRANSFORM)
-		return put_user(test_bit(IDESCSI_SG_TRANSFORM, &scsi->transform), (int __user *) arg);
-	return -EINVAL;
-}
-
-static int idescsi_queue (struct scsi_cmnd *cmd,
-		void (*done)(struct scsi_cmnd *))
-{
-	struct Scsi_Host *host = cmd->device->host;
-	idescsi_scsi_t *scsi = scsihost_to_idescsi(host);
-	ide_drive_t *drive = scsi->drive;
-	struct request *rq = NULL;
-	struct ide_atapi_pc *pc = NULL;
-	int write = cmd->sc_data_direction == DMA_TO_DEVICE;
-
-	if (!drive) {
-		scmd_printk (KERN_ERR, cmd, "drive not present\n");
-		goto abort;
-	}
-	scsi = drive_to_idescsi(drive);
-	pc = kmalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC);
-	rq = blk_get_request(drive->queue, write, GFP_ATOMIC);
-	if (rq == NULL || pc == NULL) {
-		printk (KERN_ERR "ide-scsi: %s: out of memory\n", drive->name);
-		goto abort;
-	}
-
-	memset (pc->c, 0, 12);
-	pc->flags = 0;
-	if (cmd->sc_data_direction == DMA_TO_DEVICE)
-		pc->flags |= PC_FLAG_WRITING;
-	pc->rq = rq;
-	memcpy (pc->c, cmd->cmnd, cmd->cmd_len);
-	pc->buf = NULL;
-	pc->sg = scsi_sglist(cmd);
-	pc->sg_cnt = scsi_sg_count(cmd);
-	pc->b_count = 0;
-	pc->req_xfer = pc->buf_size = scsi_bufflen(cmd);
-	pc->scsi_cmd = cmd;
-	pc->done = done;
-	pc->timeout = jiffies + cmd->request->timeout;
-
-	if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
-		printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
-		ide_scsi_hex_dump(cmd->cmnd, cmd->cmd_len);
-		if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
-			printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
-			ide_scsi_hex_dump(pc->c, 12);
-		}
-	}
-
-	rq->special = (char *) pc;
-	rq->cmd_type = REQ_TYPE_SPECIAL;
-	spin_unlock_irq(host->host_lock);
-	rq->ref_count++;
-	memcpy(rq->cmd, pc->c, 12);
-	blk_execute_rq_nowait(drive->queue, scsi->disk, rq, 0, NULL);
-	spin_lock_irq(host->host_lock);
-	return 0;
-abort:
-	kfree (pc);
-	if (rq)
-		blk_put_request(rq);
-	cmd->result = DID_ERROR << 16;
-	done(cmd);
-	return 0;
-}
-
-static int idescsi_eh_abort (struct scsi_cmnd *cmd)
-{
-	idescsi_scsi_t *scsi  = scsihost_to_idescsi(cmd->device->host);
-	ide_drive_t    *drive = scsi->drive;
-	ide_hwif_t     *hwif;
-	ide_hwgroup_t  *hwgroup;
-	int		busy;
-	int             ret   = FAILED;
-
-	struct ide_atapi_pc *pc;
-
-	/* In idescsi_eh_abort we try to gently pry our command from the ide subsystem */
-
-	if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
-		printk (KERN_WARNING "ide-scsi: abort called for %lu\n", cmd->serial_number);
-
-	if (!drive) {
-		printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_abort\n");
-		WARN_ON(1);
-		goto no_drive;
-	}
-
-	hwif = drive->hwif;
-	hwgroup = hwif->hwgroup;
-
-	/* First give it some more time, how much is "right" is hard to say :-(
-	   FIXME - uses mdelay which causes latency? */
-	busy = ide_wait_not_busy(hwif, 100);
-	if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
-		printk (KERN_WARNING "ide-scsi: drive did%s become ready\n", busy?" not":"");
-
-	spin_lock_irq(&hwgroup->lock);
-
-	/* If there is no pc running we're done (our interrupt took care of it) */
-	pc = drive->pc;
-	if (pc == NULL) {
-		ret = SUCCESS;
-		goto ide_unlock;
-	}
-
-	/* It's somewhere in flight. Does ide subsystem agree? */
-	if (pc->scsi_cmd->serial_number == cmd->serial_number && !busy &&
-	    elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != pc->rq) {
-		/*
-		 * FIXME - not sure this condition can ever occur
-		 */
-		printk (KERN_ERR "ide-scsi: cmd aborted!\n");
-
-		if (blk_sense_request(pc->rq))
-			kfree(pc->buf);
-		/* we need to call blk_put_request twice. */
-		blk_put_request(pc->rq);
-		blk_put_request(pc->rq);
-		kfree(pc);
-		drive->pc = NULL;
-
-		ret = SUCCESS;
-	}
-
-ide_unlock:
-	spin_unlock_irq(&hwgroup->lock);
-no_drive:
-	if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
-		printk (KERN_WARNING "ide-scsi: abort returns %s\n", ret == SUCCESS?"success":"failed");
-
-	return ret;
-}
-
-static int idescsi_eh_reset (struct scsi_cmnd *cmd)
-{
-	struct request *req;
-	idescsi_scsi_t *scsi  = scsihost_to_idescsi(cmd->device->host);
-	ide_drive_t    *drive = scsi->drive;
-	ide_hwgroup_t  *hwgroup;
-	int             ready = 0;
-	int             ret   = SUCCESS;
-
-	struct ide_atapi_pc *pc;
-
-	/* In idescsi_eh_reset we forcefully remove the command from the ide subsystem and reset the device. */
-
-	if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
-		printk (KERN_WARNING "ide-scsi: reset called for %lu\n", cmd->serial_number);
-
-	if (!drive) {
-		printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_reset\n");
-		WARN_ON(1);
-		return FAILED;
-	}
-
-	hwgroup = drive->hwif->hwgroup;
-
-	spin_lock_irq(cmd->device->host->host_lock);
-	spin_lock(&hwgroup->lock);
-
-	pc = drive->pc;
-	if (pc)
-		req = pc->rq;
-
-	if (pc == NULL || req != hwgroup->rq || hwgroup->handler == NULL) {
-		printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n");
-		spin_unlock(&hwgroup->lock);
-		spin_unlock_irq(cmd->device->host->host_lock);
-		return FAILED;
-	}
-
-	/* kill current request */
-	if (__blk_end_request(req, -EIO, 0))
-		BUG();
-	if (blk_sense_request(req))
-		kfree(pc->buf);
-	kfree(pc);
-	drive->pc = NULL;
-	blk_put_request(req);
-
-	/* now nuke the drive queue */
-	while ((req = elv_next_request(drive->queue))) {
-		if (__blk_end_request(req, -EIO, 0))
-			BUG();
-	}
-
-	hwgroup->rq = NULL;
-	hwgroup->handler = NULL;
-	hwgroup->busy = 1; /* will set this to zero when ide reset finished */
-	spin_unlock(&hwgroup->lock);
-
-	ide_do_reset(drive);
-
-	/* ide_do_reset starts a polling handler which restarts itself every 50ms until the reset finishes */
-
-	do {
-		spin_unlock_irq(cmd->device->host->host_lock);
-		msleep(50);
-		spin_lock_irq(cmd->device->host->host_lock);
-	} while ( HWGROUP(drive)->handler );
-
-	ready = drive_is_ready(drive);
-	HWGROUP(drive)->busy--;
-	if (!ready) {
-		printk (KERN_ERR "ide-scsi: reset failed!\n");
-		ret = FAILED;
-	}
-
-	spin_unlock_irq(cmd->device->host->host_lock);
-	return ret;
-}
-
-static int idescsi_bios(struct scsi_device *sdev, struct block_device *bdev,
-		sector_t capacity, int *parm)
-{
-	idescsi_scsi_t *idescsi = scsihost_to_idescsi(sdev->host);
-	ide_drive_t *drive = idescsi->drive;
-
-	if (drive->bios_cyl && drive->bios_head && drive->bios_sect) {
-		parm[0] = drive->bios_head;
-		parm[1] = drive->bios_sect;
-		parm[2] = drive->bios_cyl;
-	}
-	return 0;
-}
-
-static struct scsi_host_template idescsi_template = {
-	.module			= THIS_MODULE,
-	.name			= "idescsi",
-	.info			= idescsi_info,
-	.slave_configure        = idescsi_slave_configure,
-	.ioctl			= idescsi_ioctl,
-	.queuecommand		= idescsi_queue,
-	.eh_abort_handler	= idescsi_eh_abort,
-	.eh_host_reset_handler  = idescsi_eh_reset,
-	.bios_param		= idescsi_bios,
-	.can_queue		= 40,
-	.this_id		= -1,
-	.sg_tablesize		= 256,
-	.cmd_per_lun		= 5,
-	.max_sectors		= 128,
-	.use_clustering		= DISABLE_CLUSTERING,
-	.emulated		= 1,
-	.proc_name		= "ide-scsi",
-};
-
-static int ide_scsi_probe(ide_drive_t *drive)
-{
-	idescsi_scsi_t *idescsi;
-	struct Scsi_Host *host;
-	struct gendisk *g;
-	static int warned;
-	int err = -ENOMEM;
-	u16 last_lun;
-
-	if (!warned && drive->media == ide_cdrom) {
-		printk(KERN_WARNING "ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device\n");
-		warned = 1;
-	}
-
-	if (idescsi_nocd && drive->media == ide_cdrom)
-		return -ENODEV;
-
-	if (!strstr("ide-scsi", drive->driver_req) ||
-	    drive->media == ide_disk ||
-	    !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t))))
-		return -ENODEV;
-
-	drive->dev_flags |= IDE_DFLAG_SCSI;
-
-	g = alloc_disk(1 << PARTN_BITS);
-	if (!g)
-		goto out_host_put;
-
-	ide_init_disk(g, drive);
-
-	host->max_id = 1;
-
-	last_lun = drive->id[ATA_ID_LAST_LUN];
-	if (last_lun)
-		debug_log("%s: last_lun=%u\n", drive->name, last_lun);
-
-	if ((last_lun & 7) != 7)
-		host->max_lun = (last_lun & 7) + 1;
-	else
-		host->max_lun = 1;
-
-	drive->driver_data = host;
-	idescsi = scsihost_to_idescsi(host);
-	idescsi->drive = drive;
-	idescsi->driver = &idescsi_driver;
-	idescsi->host = host;
-	idescsi->disk = g;
-	g->private_data = &idescsi->driver;
-	err = 0;
-	idescsi_setup(drive, idescsi);
-	g->fops = &idescsi_ops;
-	ide_register_region(g);
-	err = scsi_add_host(host, &drive->gendev);
-	if (!err) {
-		scsi_scan_host(host);
-		return 0;
-	}
-	/* fall through on error */
-	ide_unregister_region(g);
-	ide_proc_unregister_driver(drive, &idescsi_driver);
-
-	put_disk(g);
-out_host_put:
-	drive->dev_flags &= ~IDE_DFLAG_SCSI;
-	scsi_host_put(host);
-	return err;
-}
-
-static int __init init_idescsi_module(void)
-{
-	return driver_register(&idescsi_driver.gen_driver);
-}
-
-static void __exit exit_idescsi_module(void)
-{
-	driver_unregister(&idescsi_driver.gen_driver);
-}
-
-module_param(idescsi_nocd, int, 0600);
-MODULE_PARM_DESC(idescsi_nocd, "Disable handling of CD-ROMs so they may be driven by ide-cd");
-module_init(init_idescsi_module);
-module_exit(exit_idescsi_module);
-MODULE_LICENSE("GPL");