rapidio: use stored ingress port number instead of register read

The switch port information is obtained and stored during RIO device
setup.  Therefore repeated reads from Switch Port Information CAR may be
removed.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 9 insertions, 27 deletions

diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 1123be8..d09c359 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -420,6 +420,11 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 						hopcount, RIO_EFB_ERR_MGMNT);
 	}
 
+	if (rdev->pef & (RIO_PEF_SWITCH | RIO_PEF_MULTIPORT)) {
+		rio_mport_read_config_32(port, destid, hopcount,
+					 RIO_SWP_INFO_CAR, &rdev->swpinfo);
+	}
+
 	rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
 				 &rdev->src_ops);
 	rio_mport_read_config_32(port, destid, hopcount, RIO_DST_OPS_CAR,
@@ -439,8 +444,6 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 
 	/* If a PE has both switch and other functions, show it as a switch */
 	if (rio_is_switch(rdev)) {
-		rio_mport_read_config_32(port, destid, hopcount,
-					 RIO_SWP_INFO_CAR, &rdev->swpinfo);
 		rswitch = kzalloc(sizeof(struct rio_switch), GFP_KERNEL);
 		if (!rswitch)
 			goto cleanup;
@@ -458,6 +461,7 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 				rdid++)
 			rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
 		rdev->rswitch = rswitch;
+		rswitch->rdev = rdev;
 		dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
 			     rdev->rswitch->switchid);
 		rio_switch_init(rdev, do_enum);
@@ -719,25 +723,6 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
 }
 
 /**
- * rio_get_swpinfo_inport- Gets the ingress port number
- * @mport: Master port to send transaction
- * @destid: Destination ID associated with the switch
- * @hopcount: Number of hops to the device
- *
- * Returns port number being used to access the switch device.
- */
-static u8
-rio_get_swpinfo_inport(struct rio_mport *mport, u16 destid, u8 hopcount)
-{
-	u32 result;
-
-	rio_mport_read_config_32(mport, destid, hopcount, RIO_SWP_INFO_CAR,
-				 &result);
-
-	return (u8) (result & 0xff);
-}
-
-/**
  * rio_get_swpinfo_tports- Gets total number of ports on the switch
  * @mport: Master port to send transaction
  * @destid: Destination ID associated with the switch
@@ -834,8 +819,7 @@ static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 
 	if (rio_is_switch(rdev)) {
 		next_switchid++;
-		sw_inport = rio_get_swpinfo_inport(port,
-				RIO_ANY_DESTID(port->sys_size), hopcount);
+		sw_inport = RIO_GET_PORT_NUM(rdev->swpinfo);
 		rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
 				    port->host_deviceid, sw_inport, 0);
 		rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
@@ -989,8 +973,7 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
 		    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
 		    rio_name(rdev), rdev->vid, rdev->did, num_ports);
 		for (port_num = 0; port_num < num_ports; port_num++) {
-			if (rio_get_swpinfo_inport(port, destid, hopcount) ==
-			    port_num)
+			if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)
 				continue;
 
 			if (rio_sport_is_active
@@ -1109,8 +1092,7 @@ static void rio_update_route_tables(struct rio_mport *port)
 				if (rswitch->destid == destid)
 					continue;
 
-				sport = rio_get_swpinfo_inport(port,
-						rswitch->destid, rswitch->hopcount);
+				sport = RIO_GET_PORT_NUM(rswitch->rdev->swpinfo);
 
 				if (rswitch->add_entry)	{
 					rio_route_add_entry(port, rswitch,