diff options
author | Aurelien Jarno <aurelien@aurel32.net> | 2010-05-31 21:45:48 +0000 |
---|---|---|
committer | Paul Mundt <lethal@linux-sh.org> | 2010-06-02 17:02:35 +0900 |
commit | 66f49121ffa41a19c59965b31b046d8368fec3c7 (patch) | |
tree | cb3897ae04561c13f661c6dd8542be6a34b8d477 /drivers | |
parent | 019e2574f965b800ba76f319d817eae9405ae064 (diff) | |
download | op-kernel-dev-66f49121ffa41a19c59965b31b046d8368fec3c7.zip op-kernel-dev-66f49121ffa41a19c59965b31b046d8368fec3c7.tar.gz |
clocksource: sh_tmu: compute mult and shift before registration
Since commit 98962465ed9e6ea99c38e0af63fe1dcb5a79dc25 ("nohz: Prevent
clocksource wrapping during idle"), the CPU of an R2D board never goes
to idle. This commit assumes that mult and shift are assigned before
the clocksource is registered. As a consequence the safe maximum sleep
time is negative and the CPU never goes into idle.
This patch fixes the problem by moving mult and shift initialization
from sh_tmu_clocksource_enable() to sh_tmu_register_clocksource().
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Cc: stable@kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/clocksource/sh_tmu.c | 20 |
1 files changed, 11 insertions, 9 deletions
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 8e44e14..de71590 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -199,16 +199,8 @@ static cycle_t sh_tmu_clocksource_read(struct clocksource *cs) static int sh_tmu_clocksource_enable(struct clocksource *cs) { struct sh_tmu_priv *p = cs_to_sh_tmu(cs); - int ret; - - ret = sh_tmu_enable(p); - if (ret) - return ret; - /* TODO: calculate good shift from rate and counter bit width */ - cs->shift = 10; - cs->mult = clocksource_hz2mult(p->rate, cs->shift); - return 0; + return sh_tmu_enable(p); } static void sh_tmu_clocksource_disable(struct clocksource *cs) @@ -228,6 +220,16 @@ static int sh_tmu_register_clocksource(struct sh_tmu_priv *p, cs->disable = sh_tmu_clocksource_disable; cs->mask = CLOCKSOURCE_MASK(32); cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; + + /* clk_get_rate() needs an enabled clock */ + clk_enable(p->clk); + /* channel will be configured at parent clock / 4 */ + p->rate = clk_get_rate(p->clk) / 4; + clk_disable(p->clk); + /* TODO: calculate good shift from rate and counter bit width */ + cs->shift = 10; + cs->mult = clocksource_hz2mult(p->rate, cs->shift); + dev_info(&p->pdev->dev, "used as clock source\n"); clocksource_register(cs); return 0; |