Merge branch 'imx' into devel

Conflicts:

	arch/arm/mm/Kconfig

18 files changed, 342 insertions, 161 deletions

diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index c4349c7..eed211b 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -42,6 +42,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/dma.h>
 #include <asm/io.h>
@@ -92,6 +93,8 @@ struct imxmci_host {
 	unsigned char		actual_bus_width;
 
 	int			prev_cmd_code;
+
+	struct clk		*clk;
 };
 
 #define IMXMCI_PEND_IRQ_b	0
@@ -841,7 +844,7 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		/* The prescaler is 5 for PERCLK2 equal to 96MHz
 		 * then 96MHz / 5 = 19.2 MHz
 		 */
-		clk=imx_get_perclk2();
+		clk = clk_get_rate(host->clk);
 		prescaler=(clk+(CLK_RATE*7)/8)/CLK_RATE;
 		switch(prescaler) {
 		case 0:
@@ -994,6 +997,13 @@ static int imxmci_probe(struct platform_device *pdev)
 	host->res = r;
 	host->irq = irq;
 
+	host->clk = clk_get(&pdev->dev, "perclk2");
+	if (IS_ERR(host->clk)) {
+		ret = PTR_ERR(host->clk);
+		goto out;
+	}
+	clk_enable(host->clk);
+
 	imx_gpio_mode(PB8_PF_SD_DAT0);
 	imx_gpio_mode(PB9_PF_SD_DAT1);
 	imx_gpio_mode(PB10_PF_SD_DAT2);
@@ -1053,6 +1063,10 @@ out:
 			imx_dma_free(host->dma);
 			host->dma_allocated=0;
 		}
+		if (host->clk) {
+			clk_disable(host->clk);
+			clk_put(host->clk);
+		}
 	}
 	if (mmc)
 		mmc_free_host(mmc);
@@ -1082,6 +1096,9 @@ static int imxmci_remove(struct platform_device *pdev)
 
 		tasklet_kill(&host->tasklet);
 
+		clk_disable(host->clk);
+		clk_put(host->clk);
+
 		release_resource(host->res);
 
 		mmc_free_host(mmc);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 5a97544..18ca907 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -789,7 +789,7 @@ config BFIN_UART3_CTSRTS
 
 config SERIAL_IMX
 	bool "IMX serial port support"
-	depends on ARM && ARCH_IMX
+	depends on ARM && (ARCH_IMX || ARCH_MXC)
 	select SERIAL_CORE
 	help
 	  If you have a machine based on a Motorola IMX CPU you
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 5a375bf..64acb39 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -40,6 +40,7 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -61,6 +62,11 @@
 #define UBIR  0xa4 /* BRM Incremental Register */
 #define UBMR  0xa8 /* BRM Modulator Register */
 #define UBRC  0xac /* Baud Rate Count Register */
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define ONEMS 0xb0 /* One Millisecond register */
+#define UTS   0xb4 /* UART Test Register */
+#endif
+#ifdef CONFIG_ARCH_IMX
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -70,6 +76,7 @@
 #define BMPR3 0xc8 /* BRM Modulator Register 3 */
 #define BMPR4 0xcc /* BRM Modulator Register 4 */
 #define UTS   0xd0 /* UART Test Register */
+#endif
 
 /* UART Control Register Bit Fields.*/
 #define  URXD_CHARRDY    (1<<15)
@@ -89,7 +96,12 @@
 #define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)	 /* Send break */
 #define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
+#ifdef CONFIG_ARCH_IMX
 #define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
+#endif
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define  UCR1_UARTCLKEN  (0)	 /* not present on mx2/mx3 */
+#endif
 #define  UCR1_DOZE       (1<<1)	 /* Doze */
 #define  UCR1_UARTEN     (1<<0)	 /* UART enabled */
 #define  UCR2_ESCI     	 (1<<15) /* Escape seq interrupt enable */
@@ -163,8 +175,19 @@
 #define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
+#ifdef CONFIG_ARCH_IMX
 #define SERIAL_IMX_MAJOR	204
 #define MINOR_START		41
+#define DEV_NAME		"ttySMX"
+#define MAX_INTERNAL_IRQ	IMX_IRQS
+#endif
+
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define SERIAL_IMX_MAJOR        207
+#define MINOR_START	        16
+#define DEV_NAME		"ttymxc"
+#define MAX_INTERNAL_IRQ	MXC_MAX_INT_LINES
+#endif
 
 /*
  * This determines how often we check the modem status signals
@@ -176,12 +199,15 @@
 
 #define DRIVER_NAME "IMX-uart"
 
+#define UART_NR 8
+
 struct imx_port {
 	struct uart_port	port;
 	struct timer_list	timer;
 	unsigned int		old_status;
 	int			txirq,rxirq,rtsirq;
 	int			have_rtscts:1;
+	struct clk		*clk;
 };
 
 /*
@@ -405,6 +431,26 @@ out:
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t imx_int(int irq, void *dev_id)
+{
+	struct imx_port *sport = dev_id;
+	unsigned int sts;
+
+	sts = readl(sport->port.membase + USR1);
+
+	if (sts & USR1_RRDY)
+		imx_rxint(irq, dev_id);
+
+	if (sts & USR1_TRDY &&
+			readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
+		imx_txint(irq, dev_id);
+
+	if (sts & USR1_RTSS)
+		imx_rtsint(irq, dev_id);
+
+	return IRQ_HANDLED;
+}
+
 /*
  * Return TIOCSER_TEMT when transmitter is not busy.
  */
@@ -477,7 +523,8 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 	 * RFDIV is set such way to satisfy requested uartclk value
 	 */
 	val = TXTL << 10 | RXTL;
-	ufcr_rfdiv = (imx_get_perclk1() + sport->port.uartclk / 2) / sport->port.uartclk;
+	ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
+			/ sport->port.uartclk;
 
 	if(!ufcr_rfdiv)
 		ufcr_rfdiv = 1;
@@ -509,21 +556,34 @@ static int imx_startup(struct uart_port *port)
 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
 	/*
-	 * Allocate the IRQ
+	 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
+	 * chips only have one interrupt.
 	 */
-	retval = request_irq(sport->rxirq, imx_rxint, 0,
-			     DRIVER_NAME, sport);
-	if (retval) goto error_out1;
-
-	retval = request_irq(sport->txirq, imx_txint, 0,
-			     DRIVER_NAME, sport);
-	if (retval) goto error_out2;
-
-	retval = request_irq(sport->rtsirq, imx_rtsint,
-			     (sport->rtsirq < IMX_IRQS) ? 0 :
+	if (sport->txirq > 0) {
+		retval = request_irq(sport->rxirq, imx_rxint, 0,
+				DRIVER_NAME, sport);
+		if (retval)
+			goto error_out1;
+
+		retval = request_irq(sport->txirq, imx_txint, 0,
+				DRIVER_NAME, sport);
+		if (retval)
+			goto error_out2;
+
+		retval = request_irq(sport->rtsirq, imx_rtsint,
+			     (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
 			       IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			     DRIVER_NAME, sport);
-	if (retval) goto error_out3;
+				DRIVER_NAME, sport);
+		if (retval)
+			goto error_out3;
+	} else {
+		retval = request_irq(sport->port.irq, imx_int, 0,
+				DRIVER_NAME, sport);
+		if (retval) {
+			free_irq(sport->port.irq, sport);
+			goto error_out1;
+		}
+	}
 
 	/*
 	 * Finally, clear and enable interrupts
@@ -548,9 +608,11 @@ static int imx_startup(struct uart_port *port)
 	return 0;
 
 error_out3:
-	free_irq(sport->txirq, sport);
+	if (sport->txirq)
+		free_irq(sport->txirq, sport);
 error_out2:
-	free_irq(sport->rxirq, sport);
+	if (sport->rxirq)
+		free_irq(sport->rxirq, sport);
 error_out1:
 	return retval;
 }
@@ -568,9 +630,12 @@ static void imx_shutdown(struct uart_port *port)
 	/*
 	 * Free the interrupts
 	 */
-	free_irq(sport->rtsirq, sport);
-	free_irq(sport->txirq, sport);
-	free_irq(sport->rxirq, sport);
+	if (sport->txirq > 0) {
+		free_irq(sport->rtsirq, sport);
+		free_irq(sport->txirq, sport);
+		free_irq(sport->rxirq, sport);
+	} else
+		free_irq(sport->port.irq, sport);
 
 	/*
 	 * Disable all interrupts, port and break condition.
@@ -589,6 +654,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned long flags;
 	unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
 	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
+	unsigned int div, num, denom, ufcr;
 
 	/*
 	 * If we don't support modem control lines, don't allow
@@ -634,7 +700,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	/*
 	 * Ask the core to calculate the divisor for us.
 	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+	baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
 	quot = uart_get_divisor(port, baud);
 
 	spin_lock_irqsave(&sport->port.lock, flags);
@@ -684,14 +750,41 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 			sport->port.membase + UCR2);
 	old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
 
-	/* set the baud rate. We assume uartclk = 16 MHz
-	 *
-	 * baud * 16   UBIR - 1
-	 * --------- = --------
-	 *  uartclk    UBMR - 1
-	 */
-	writel((baud / 100) - 1, sport->port.membase + UBIR);
-	writel(10000 - 1, sport->port.membase + UBMR);
+	div = sport->port.uartclk / (baud * 16);
+	if (div > 7)
+		div = 7;
+	if (!div)
+		div = 1;
+
+	num = baud;
+	denom = port->uartclk / div / 16;
+
+	/* shift num and denom right until they fit into 16 bits */
+	while (num > 0x10000 || denom > 0x10000) {
+		num >>= 1;
+		denom >>= 1;
+	}
+	if (num > 0)
+		num -= 1;
+	if (denom > 0)
+		denom -= 1;
+
+	writel(num, sport->port.membase + UBIR);
+	writel(denom, sport->port.membase + UBMR);
+
+	if (div == 7)
+		div = 6; /* 6 in RFDIV means divide by 7 */
+	else
+		div = 6 - div;
+
+	ufcr = readl(sport->port.membase + UFCR);
+	ufcr = (ufcr & (~UFCR_RFDIV)) |
+	    (div << 7);
+	writel(ufcr, sport->port.membase + UFCR);
+
+#ifdef ONEMS
+	writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
+#endif
 
 	writel(old_ucr1, sport->port.membase + UCR1);
 
@@ -801,65 +894,7 @@ static struct uart_ops imx_pops = {
 	.verify_port	= imx_verify_port,
 };
 
-static struct imx_port imx_ports[] = {
-	{
-	.txirq  = UART1_MINT_TX,
-	.rxirq  = UART1_MINT_RX,
-	.rtsirq = UART1_MINT_RTS,
-	.port	= {
-		.type		= PORT_IMX,
-		.iotype		= UPIO_MEM,
-		.membase	= (void *)IMX_UART1_BASE,
-		.mapbase	= 0x00206000,
-		.irq		= UART1_MINT_RX,
-		.uartclk	= 16000000,
-		.fifosize	= 32,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.ops		= &imx_pops,
-		.line		= 0,
-	},
-	}, {
-	.txirq  = UART2_MINT_TX,
-	.rxirq  = UART2_MINT_RX,
-	.rtsirq = UART2_MINT_RTS,
-	.port	= {
-		.type		= PORT_IMX,
-		.iotype		= UPIO_MEM,
-		.membase	= (void *)IMX_UART2_BASE,
-		.mapbase	= 0x00207000,
-		.irq		= UART2_MINT_RX,
-		.uartclk	= 16000000,
-		.fifosize	= 32,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.ops		= &imx_pops,
-		.line		= 1,
-	},
-	}
-};
-
-/*
- * Setup the IMX serial ports.
- * Note also that we support "console=ttySMXx" where "x" is either 0 or 1.
- * Which serial port this ends up being depends on the machine you're
- * running this kernel on.  I'm not convinced that this is a good idea,
- * but that's the way it traditionally works.
- *
- */
-static void __init imx_init_ports(void)
-{
-	static int first = 1;
-	int i;
-
-	if (!first)
-		return;
-	first = 0;
-
-	for (i = 0; i < ARRAY_SIZE(imx_ports); i++) {
-		init_timer(&imx_ports[i].timer);
-		imx_ports[i].timer.function = imx_timeout;
-		imx_ports[i].timer.data     = (unsigned long)&imx_ports[i];
-	}
-}
+static struct imx_port *imx_ports[UART_NR];
 
 #ifdef CONFIG_SERIAL_IMX_CONSOLE
 static void imx_console_putchar(struct uart_port *port, int ch)
@@ -878,7 +913,7 @@ static void imx_console_putchar(struct uart_port *port, int ch)
 static void
 imx_console_write(struct console *co, const char *s, unsigned int count)
 {
-	struct imx_port *sport = &imx_ports[co->index];
+	struct imx_port *sport = imx_ports[co->index];
 	unsigned int old_ucr1, old_ucr2;
 
 	/*
@@ -944,7 +979,7 @@ imx_console_get_options(struct imx_port *sport, int *baud,
 		else
 			ucfr_rfdiv = 6 - ucfr_rfdiv;
 
-		uartclk = imx_get_perclk1();
+		uartclk = clk_get_rate(sport->clk);
 		uartclk /= ucfr_rfdiv;
 
 		{	/*
@@ -984,7 +1019,7 @@ imx_console_setup(struct console *co, char *options)
 	 */
 	if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
 		co->index = 0;
-	sport = &imx_ports[co->index];
+	sport = imx_ports[co->index];
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -998,7 +1033,7 @@ imx_console_setup(struct console *co, char *options)
 
 static struct uart_driver imx_reg;
 static struct console imx_console = {
-	.name		= "ttySMX",
+	.name		= DEV_NAME,
 	.write		= imx_console_write,
 	.device		= uart_console_device,
 	.setup		= imx_console_setup,
@@ -1007,14 +1042,6 @@ static struct console imx_console = {
 	.data		= &imx_reg,
 };
 
-static int __init imx_rs_console_init(void)
-{
-	imx_init_ports();
-	register_console(&imx_console);
-	return 0;
-}
-console_initcall(imx_rs_console_init);
-
 #define IMX_CONSOLE	&imx_console
 #else
 #define IMX_CONSOLE	NULL
@@ -1023,7 +1050,7 @@ console_initcall(imx_rs_console_init);
 static struct uart_driver imx_reg = {
 	.owner          = THIS_MODULE,
 	.driver_name    = DRIVER_NAME,
-	.dev_name       = "ttySMX",
+	.dev_name       = DEV_NAME,
 	.major          = SERIAL_IMX_MAJOR,
 	.minor          = MINOR_START,
 	.nr             = ARRAY_SIZE(imx_ports),
@@ -1050,29 +1077,98 @@ static int serial_imx_resume(struct platform_device *dev)
         return 0;
 }
 
-static int serial_imx_probe(struct platform_device *dev)
+static int serial_imx_probe(struct platform_device *pdev)
 {
+	struct imx_port *sport;
 	struct imxuart_platform_data *pdata;
+	void __iomem *base;
+	int ret = 0;
+	struct resource *res;
+
+	sport = kzalloc(sizeof(*sport), GFP_KERNEL);
+	if (!sport)
+		return -ENOMEM;
 
-	imx_ports[dev->id].port.dev = &dev->dev;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		goto free;
+	}
+
+	base = ioremap(res->start, PAGE_SIZE);
+	if (!base) {
+		ret = -ENOMEM;
+		goto free;
+	}
+
+	sport->port.dev = &pdev->dev;
+	sport->port.mapbase = res->start;
+	sport->port.membase = base;
+	sport->port.type = PORT_IMX,
+	sport->port.iotype = UPIO_MEM;
+	sport->port.irq = platform_get_irq(pdev, 0);
+	sport->rxirq = platform_get_irq(pdev, 0);
+	sport->txirq = platform_get_irq(pdev, 1);
+	sport->rtsirq = platform_get_irq(pdev, 2);
+	sport->port.fifosize = 32;
+	sport->port.ops = &imx_pops;
+	sport->port.flags = UPF_BOOT_AUTOCONF;
+	sport->port.line = pdev->id;
+	init_timer(&sport->timer);
+	sport->timer.function = imx_timeout;
+	sport->timer.data     = (unsigned long)sport;
+
+	sport->clk = clk_get(&pdev->dev, "uart_clk");
+	if (IS_ERR(sport->clk)) {
+		ret = PTR_ERR(sport->clk);
+		goto unmap;
+	}
+	clk_enable(sport->clk);
 
-	pdata = (struct imxuart_platform_data *)dev->dev.platform_data;
+	sport->port.uartclk = clk_get_rate(sport->clk);
+
+	imx_ports[pdev->id] = sport;
+
+	pdata = pdev->dev.platform_data;
 	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
-		imx_ports[dev->id].have_rtscts = 1;
+		sport->have_rtscts = 1;
+
+	if (pdata->init)
+		pdata->init(pdev);
+
+	uart_add_one_port(&imx_reg, &sport->port);
+	platform_set_drvdata(pdev, &sport->port);
 
-	uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
-	platform_set_drvdata(dev, &imx_ports[dev->id]);
 	return 0;
+unmap:
+	iounmap(sport->port.membase);
+free:
+	kfree(sport);
+
+	return ret;
 }
 
-static int serial_imx_remove(struct platform_device *dev)
+static int serial_imx_remove(struct platform_device *pdev)
 {
-	struct imx_port *sport = platform_get_drvdata(dev);
+	struct imxuart_platform_data *pdata;
+	struct imx_port *sport = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(dev, NULL);
+	pdata = pdev->dev.platform_data;
 
-	if (sport)
+	platform_set_drvdata(pdev, NULL);
+
+	if (sport) {
 		uart_remove_one_port(&imx_reg, &sport->port);
+		clk_put(sport->clk);
+	}
+
+	clk_disable(sport->clk);
+
+	if (pdata->exit)
+		pdata->exit(pdev);
+
+	iounmap(sport->port.membase);
+	kfree(sport);
 
 	return 0;
 }
@@ -1095,8 +1191,6 @@ static int __init imx_serial_init(void)
 
 	printk(KERN_INFO "Serial: IMX driver\n");
 
-	imx_init_ports();
-
 	ret = uart_register_driver(&imx_reg);
 	if (ret)
 		return ret;
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 547e302..54ac7be 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -29,6 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -250,6 +251,8 @@ struct driver_data {
 	int tx_dma_needs_unmap;
 	size_t tx_map_len;
 	u32 dummy_dma_buf ____cacheline_aligned;
+
+	struct clk *clk;
 };
 
 /* Runtime state */
@@ -855,15 +858,15 @@ static irqreturn_t spi_int(int irq, void *dev_id)
 	return drv_data->transfer_handler(drv_data);
 }
 
-static inline u32 spi_speed_hz(u32 data_rate)
+static inline u32 spi_speed_hz(struct driver_data *drv_data, u32 data_rate)
 {
-	return imx_get_perclk2() / (4 << ((data_rate) >> 13));
+	return clk_get_rate(drv_data->clk) / (4 << ((data_rate) >> 13));
 }
 
-static u32 spi_data_rate(u32 speed_hz)
+static u32 spi_data_rate(struct driver_data *drv_data, u32 speed_hz)
 {
 	u32 div;
-	u32 quantized_hz = imx_get_perclk2() >> 2;
+	u32 quantized_hz = clk_get_rate(drv_data->clk) >> 2;
 
 	for (div = SPI_PERCLK2_DIV_MIN;
 		div <= SPI_PERCLK2_DIV_MAX;
@@ -947,7 +950,7 @@ static void pump_transfers(unsigned long data)
 	tmp = transfer->speed_hz;
 	if (tmp == 0)
 		tmp = chip->max_speed_hz;
-	tmp = spi_data_rate(tmp);
+	tmp = spi_data_rate(drv_data, tmp);
 	u32_EDIT(control, SPI_CONTROL_DATARATE, tmp);
 
 	writel(control, regs + SPI_CONTROL);
@@ -1109,7 +1112,7 @@ static int transfer(struct spi_device *spi, struct spi_message *msg)
 	msg->actual_length = 0;
 
 	/* Per transfer setup check */
-	min_speed_hz = spi_speed_hz(SPI_CONTROL_DATARATE_MIN);
+	min_speed_hz = spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN);
 	max_speed_hz = spi->max_speed_hz;
 	list_for_each_entry(trans, &msg->transfers, transfer_list) {
 		tmp = trans->bits_per_word;
@@ -1176,6 +1179,7 @@ msg_rejected:
    applied and notified to the calling driver. */
 static int setup(struct spi_device *spi)
 {
+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
 	struct spi_imx_chip *chip_info;
 	struct chip_data *chip;
 	int first_setup = 0;
@@ -1304,14 +1308,14 @@ static int setup(struct spi_device *spi)
 	chip->n_bytes = (tmp <= 8) ? 1 : 2;
 
 	/* SPI datarate */
-	tmp = spi_data_rate(spi->max_speed_hz);
+	tmp = spi_data_rate(drv_data, spi->max_speed_hz);
 	if (tmp == SPI_CONTROL_DATARATE_BAD) {
 		status = -EINVAL;
 		dev_err(&spi->dev,
 			"setup - "
 			"HW min speed (%d Hz) exceeds required "
 			"max speed (%d Hz)\n",
-			spi_speed_hz(SPI_CONTROL_DATARATE_MIN),
+			spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN),
 			spi->max_speed_hz);
 		if (first_setup)
 			goto err_first_setup;
@@ -1321,7 +1325,7 @@ static int setup(struct spi_device *spi)
 	} else {
 		u32_EDIT(chip->control, SPI_CONTROL_DATARATE, tmp);
 		/* Actual rounded max_speed_hz */
-		tmp = spi_speed_hz(tmp);
+		tmp = spi_speed_hz(drv_data, tmp);
 		spi->max_speed_hz = tmp;
 		chip->max_speed_hz = tmp;
 	}
@@ -1352,7 +1356,7 @@ static int setup(struct spi_device *spi)
 		chip->period & SPI_PERIOD_WAIT,
 		spi->mode,
 		spi->bits_per_word,
-		spi_speed_hz(SPI_CONTROL_DATARATE_MIN),
+		spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN),
 		spi->max_speed_hz);
 	return status;
 
@@ -1465,6 +1469,14 @@ static int __init spi_imx_probe(struct platform_device *pdev)
 		goto err_no_pdata;
 	}
 
+	drv_data->clk = clk_get(&pdev->dev, "perclk2");
+	if (IS_ERR(drv_data->clk)) {
+		dev_err(&pdev->dev, "probe - cannot get get\n");
+		status = PTR_ERR(drv_data->clk);
+		goto err_no_clk;
+	}
+	clk_enable(drv_data->clk);
+
 	/* Allocate master with space for drv_data */
 	master = spi_alloc_master(dev, sizeof(struct driver_data));
 	if (!master) {
@@ -1623,6 +1635,9 @@ err_no_iores:
 	spi_master_put(master);
 
 err_no_pdata:
+	clk_disable(drv_data->clk);
+	clk_put(drv_data->clk);
+err_no_clk:
 err_no_mem:
 	return status;
 }
@@ -1662,6 +1677,9 @@ static int __exit spi_imx_remove(struct platform_device *pdev)
 	if (irq >= 0)
 		free_irq(irq, drv_data);
 
+	clk_disable(drv_data->clk);
+	clk_put(drv_data->clk);
+
 	/* Release map resources */
 	iounmap(drv_data->regs);
 	release_resource(drv_data->ioarea);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 63c3404..c3201aff 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1125,9 +1125,6 @@ static void stop_data_traffic(struct acm *acm)
 	for (i = 0; i < acm->rx_buflimit; i++)
 		usb_kill_urb(acm->ru[i].urb);
 
-	INIT_LIST_HEAD(&acm->filled_read_bufs);
-	INIT_LIST_HEAD(&acm->spare_read_bufs);
-
 	tasklet_enable(&acm->urb_task);
 
 	cancel_work_sync(&acm->work);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 09a53e7..7158dbb 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1684,19 +1684,30 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum);
 irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 {
 	struct usb_hcd		*hcd = __hcd;
-	int			start = hcd->state;
+	unsigned long		flags;
+	irqreturn_t		rc;
 
-	if (unlikely(start == HC_STATE_HALT ||
-	    !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
-		return IRQ_NONE;
-	if (hcd->driver->irq (hcd) == IRQ_NONE)
-		return IRQ_NONE;
+	/* IRQF_DISABLED doesn't work correctly with shared IRQs
+	 * when the first handler doesn't use it.  So let's just
+	 * assume it's never used.
+	 */
+	local_irq_save(flags);
 
-	set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+	if (unlikely(hcd->state == HC_STATE_HALT ||
+		     !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+		rc = IRQ_NONE;
+	} else if (hcd->driver->irq(hcd) == IRQ_NONE) {
+		rc = IRQ_NONE;
+	} else {
+		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 
-	if (unlikely(hcd->state == HC_STATE_HALT))
-		usb_hc_died (hcd);
-	return IRQ_HANDLED;
+		if (unlikely(hcd->state == HC_STATE_HALT))
+			usb_hc_died(hcd);
+		rc = IRQ_HANDLED;
+	}
+
+	local_irq_restore(flags);
+	return rc;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1860,6 +1871,13 @@ int usb_add_hcd(struct usb_hcd *hcd,
 
 	/* enable irqs just before we start the controller */
 	if (hcd->driver->irq) {
+
+		/* IRQF_DISABLED doesn't work as advertised when used together
+		 * with IRQF_SHARED. As usb_hcd_irq() will always disable
+		 * interrupts we can remove it here.
+		 */
+		irqflags &= ~IRQF_DISABLED;
+
 		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
 				hcd->driver->description, hcd->self.busnum);
 		if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 94789be..512d2d5 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -713,18 +713,11 @@ static void hub_restart(struct usb_hub *hub, int type)
 		}
 
 		/* Was the power session lost while we were suspended? */
-		switch (type) {
-		case HUB_RESET_RESUME:
-			portstatus = 0;
-			portchange = USB_PORT_STAT_C_CONNECTION;
-			break;
+		status = hub_port_status(hub, port1, &portstatus, &portchange);
 
-		case HUB_RESET:
-		case HUB_RESUME:
-			status = hub_port_status(hub, port1,
-					&portstatus, &portchange);
-			break;
-		}
+		/* If the device is gone, khubd will handle it later */
+		if (status == 0 && !(portstatus & USB_PORT_STAT_CONNECTION))
+			continue;
 
 		/* For "USB_PERSIST"-enabled children we must
 		 * mark the child device for reset-resume and
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 35a0309..90245fd 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -177,6 +177,15 @@ timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
 static inline void
 timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 {
+	/* Don't override timeouts which shrink or (later) disable
+	 * the async ring; just the I/O watchdog.  Note that if a
+	 * SHRINK were pending, OFF would never be requested.
+	 */
+	if (timer_pending(&ehci->watchdog)
+			&& ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+				& ehci->actions))
+		return;
+
 	if (!test_and_set_bit (action, &ehci->actions)) {
 		unsigned long t;
 
@@ -192,15 +201,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 			t = EHCI_SHRINK_JIFFIES;
 			break;
 		}
-		t += jiffies;
-		// all timings except IAA watchdog can be overridden.
-		// async queue SHRINK often precedes IAA.  while it's ready
-		// to go OFF neither can matter, and afterwards the IO
-		// watchdog stops unless there's still periodic traffic.
-		if (time_before_eq(t, ehci->watchdog.expires)
-				&& timer_pending (&ehci->watchdog))
-			return;
-		mod_timer (&ehci->watchdog, t);
+		mod_timer(&ehci->watchdog, t + jiffies);
 	}
 }
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 33f1c1c..a8160d6 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1054,7 +1054,7 @@ MODULE_LICENSE ("GPL");
 
 #ifdef CONFIG_MFD_SM501
 #include "ohci-sm501.c"
-#define PLATFORM_DRIVER		ohci_hcd_sm501_driver
+#define SM501_OHCI_DRIVER	ohci_hcd_sm501_driver
 #endif
 
 #if	!defined(PCI_DRIVER) &&		\
@@ -1062,6 +1062,7 @@ MODULE_LICENSE ("GPL");
 	!defined(OF_PLATFORM_DRIVER) &&	\
 	!defined(SA1111_DRIVER) &&	\
 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
+	!defined(SM501_OHCI_DRIVER) && \
 	!defined(SSB_OHCI_DRIVER)
 #error "missing bus glue for ohci-hcd"
 #endif
@@ -1121,9 +1122,18 @@ static int __init ohci_hcd_mod_init(void)
 		goto error_ssb;
 #endif
 
+#ifdef SM501_OHCI_DRIVER
+	retval = platform_driver_register(&SM501_OHCI_DRIVER);
+	if (retval < 0)
+		goto error_sm501;
+#endif
+
 	return retval;
 
 	/* Error path */
+#ifdef SM501_OHCI_DRIVER
+ error_sm501:
+#endif
 #ifdef SSB_OHCI_DRIVER
  error_ssb:
 #endif
@@ -1159,6 +1169,9 @@ module_init(ohci_hcd_mod_init);
 
 static void __exit ohci_hcd_mod_exit(void)
 {
+#ifdef SM501_OHCI_DRIVER
+	platform_driver_unregister(&SM501_OHCI_DRIVER);
+#endif
 #ifdef SSB_OHCI_DRIVER
 	ssb_driver_unregister(&SSB_OHCI_DRIVER);
 #endif
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 9c9f3b5..9b54740 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -952,6 +952,7 @@ rescan_this:
 			struct urb	*urb;
 			urb_priv_t	*urb_priv;
 			__hc32		savebits;
+			u32		tdINFO;
 
 			td = list_entry (entry, struct td, td_list);
 			urb = td->urb;
@@ -966,6 +967,17 @@ rescan_this:
 			savebits = *prev & ~cpu_to_hc32 (ohci, TD_MASK);
 			*prev = td->hwNextTD | savebits;
 
+			/* If this was unlinked, the TD may not have been
+			 * retired ... so manually save the data toggle.
+			 * The controller ignores the value we save for
+			 * control and ISO endpoints.
+			 */
+			tdINFO = hc32_to_cpup(ohci, &td->hwINFO);
+			if ((tdINFO & TD_T) == TD_T_DATA0)
+				ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_C);
+			else if ((tdINFO & TD_T) == TD_T_DATA1)
+				ed->hwHeadP |= cpu_to_hc32(ohci, ED_C);
+
 			/* HC may have partly processed this TD */
 			td_done (ohci, urb, td);
 			urb_priv->td_cnt++;
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index cb7fa0e..33182f4 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3264,8 +3264,6 @@ static void sisusb_disconnect(struct usb_interface *intf)
 
 	/* decrement our usage count */
 	kref_put(&sisusb->kref, sisusb_delete);
-
-	dev_info(&sisusb->sisusb_dev->dev, "Disconnected\n");
 }
 
 static struct usb_device_id sisusb_table [] = {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5234e7a..0ff4a39 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -637,6 +637,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
+	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 06e0eca..8302eca 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -828,6 +828,9 @@
 /* Propox devices */
 #define FTDI_PROPOX_JTAGCABLEII_PID	0xD738
 
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index ea924dc..d9fb376 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -570,7 +570,12 @@ static struct usb_serial_driver ipaq_device = {
 	.description =		"PocketPC PDA",
 	.usb_driver = 		&ipaq_driver,
 	.id_table =		ipaq_id_table,
-	.num_ports =		2,
+	/*
+	 * some devices have an extra endpoint, which
+	 * must be ignored as it would make the core
+	 * create a second port which oopses when used
+	 */
+	.num_ports =		1,
 	.open =			ipaq_open,
 	.close =		ipaq_close,
 	.attach =		ipaq_startup,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 43cfde8..a73420d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -306,6 +306,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 103195a..2a0dd1b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -57,6 +57,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index cff160a..6ac3bbc 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -15,6 +15,7 @@
 #define PL2303_PRODUCT_ID_RSAQ3		0xaaa2
 #define PL2303_PRODUCT_ID_ALDIGA	0x0611
 #define PL2303_PRODUCT_ID_MMX		0x0612
+#define PL2303_PRODUCT_ID_GPRS		0x0609
 
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 45fe366..39a7c11 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -402,11 +402,19 @@ UNUSUAL_DEV(  0x04a5, 0x3010, 0x0100, 0x0100,
 		US_FL_IGNORE_RESIDUE ),
 
 #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
+/* CY7C68300 : support atacb */
 UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
 		"Cypress",
 		"Cypress AT2LP",
 		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
 		0),
+
+/* CY7C68310 : support atacb and atacb2 */
+UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
+		"Cypress",
+		"Cypress ISD-300LP",
+		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
+		0),
 #endif
 
 /* Reported by Simon Levitt <simon@whattf.com>