Pull thinkpad into release branch

Conflicts:

	drivers/misc/Kconfig

Signed-off-by: Len Brown <len.brown@intel.com>

7 files changed, 4936 insertions, 2836 deletions

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index e2ce4a9..45c4315 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -218,43 +218,6 @@ config ACPI_ASUS
 	  NOTE: This driver is deprecated and will probably be removed soon,
 	  use asus-laptop instead.
 
-config ACPI_IBM
-	tristate "IBM ThinkPad Laptop Extras"
-	depends on X86
-	select BACKLIGHT_CLASS_DEVICE
-	---help---
-	  This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
-	  support for Fn-Fx key combinations, Bluetooth control, video
-	  output switching, ThinkLight control, UltraBay eject and more.
-	  For more information about this driver see <file:Documentation/ibm-acpi.txt>
-	  and <http://ibm-acpi.sf.net/> .
-
-	  If you have an IBM ThinkPad laptop, say Y or M here.
-
-config ACPI_IBM_DOCK
-	bool "Legacy Docking Station Support"
-	depends on ACPI_IBM
-	depends on ACPI_DOCK=n
-	default n
-	---help---
-	  Allows the ibm_acpi driver to handle docking station events.
-	  This support is obsoleted by CONFIG_HOTPLUG_PCI_ACPI.  It will
-	  allow locking and removing the laptop from the docking station,
-	  but will not properly connect PCI devices.
-
-	  If you are not sure, say N here.
-
-config ACPI_IBM_BAY
-	bool "Legacy Removable Bay Support"
-	depends on ACPI_IBM
-	default y
-	---help---
-	  Allows the ibm_acpi driver to handle removable bays.  It will allow
-	  disabling the device in the bay, and also generate notifications when
-	  the bay lever is ejected or inserted.
-
-	  If you are not sure, say Y here.
-
 config ACPI_TOSHIBA
 	tristate "Toshiba Laptop Extras"
 	depends on X86
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 5956e9f..92642ab 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -55,7 +55,6 @@ obj-$(CONFIG_ACPI_SYSTEM)	+= system.o event.o
 obj-$(CONFIG_ACPI_DEBUG)	+= debug.o
 obj-$(CONFIG_ACPI_NUMA)		+= numa.o
 obj-$(CONFIG_ACPI_ASUS)		+= asus_acpi.o
-obj-$(CONFIG_ACPI_IBM)		+= ibm_acpi.o
 obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o
 obj-$(CONFIG_ACPI_HOTPLUG_MEMORY)	+= acpi_memhotplug.o
 obj-y				+= cm_sbs.o
diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c
deleted file mode 100644
index dc10966..0000000
--- a/drivers/acpi/ibm_acpi.c
+++ /dev/null
@@ -1,2798 +0,0 @@
-/*
- *  ibm_acpi.c - IBM ThinkPad ACPI Extras
- *
- *
- *  Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
- *  Copyright (C) 2006 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define IBM_VERSION "0.13"
-
-/*
- *  Changelog:
- *
- *  2006-11-22	0.13	new maintainer
- *  			changelog now lives in git commit history, and will
- *  			not be updated further in-file.
- *  
- *  2005-08-17  0.12	fix compilation on 2.6.13-rc kernels
- *  2005-03-17	0.11	support for 600e, 770x
- *			    thanks to Jamie Lentin <lentinj@dial.pipex.com>
- *			support for 770e, G41
- *			G40 and G41 don't have a thinklight
- *			temperatures no longer experimental
- *			experimental brightness control
- *			experimental volume control
- *			experimental fan enable/disable
- *  2005-01-16	0.10	fix module loading on R30, R31 
- *  2005-01-16	0.9	support for 570, R30, R31
- *			ultrabay support on A22p, A3x
- *			limit arg for cmos, led, beep, drop experimental status
- *			more capable led control on A21e, A22p, T20-22, X20
- *			experimental temperatures and fan speed
- *			experimental embedded controller register dump
- *			mark more functions as __init, drop incorrect __exit
- *			use MODULE_VERSION
- *			    thanks to Henrik Brix Andersen <brix@gentoo.org>
- *			fix parameter passing on module loading
- *			    thanks to Rusty Russell <rusty@rustcorp.com.au>
- *			    thanks to Jim Radford <radford@blackbean.org>
- *  2004-11-08	0.8	fix init error case, don't return from a macro
- *			    thanks to Chris Wright <chrisw@osdl.org>
- *  2004-10-23	0.7	fix module loading on A21e, A22p, T20, T21, X20
- *			fix led control on A21e
- *  2004-10-19	0.6	use acpi_bus_register_driver() to claim HKEY device
- *  2004-10-18	0.5	thinklight support on A21e, G40, R32, T20, T21, X20
- *			proc file format changed
- *			video_switch command
- *			experimental cmos control
- *			experimental led control
- *			experimental acpi sounds
- *  2004-09-16	0.4	support for module parameters
- *			hotkey mask can be prefixed by 0x
- *			video output switching
- *			video expansion control
- *			ultrabay eject support
- *			removed lcd brightness/on/off control, didn't work
- *  2004-08-17	0.3	support for R40
- *			lcd off, brightness control
- *			thinklight on/off
- *  2004-08-14	0.2	support for T series, X20
- *			bluetooth enable/disable
- *			hotkey events disabled by default
- *			removed fan control, currently useless
- *  2004-08-09	0.1	initial release, support for X series
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <linux/proc_fs.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <asm/uaccess.h>
-
-#include <linux/dmi.h>
-#include <linux/jiffies.h>
-#include <linux/workqueue.h>
-
-#include <acpi/acpi_drivers.h>
-#include <acpi/acnamesp.h>
-
-#define IBM_NAME "ibm"
-#define IBM_DESC "IBM ThinkPad ACPI Extras"
-#define IBM_FILE "ibm_acpi"
-#define IBM_URL "http://ibm-acpi.sf.net/"
-
-MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
-MODULE_DESCRIPTION(IBM_DESC);
-MODULE_VERSION(IBM_VERSION);
-MODULE_LICENSE("GPL");
-
-#define IBM_DIR IBM_NAME
-
-#define IBM_LOG IBM_FILE ": "
-#define IBM_ERR	   KERN_ERR    IBM_LOG
-#define IBM_NOTICE KERN_NOTICE IBM_LOG
-#define IBM_INFO   KERN_INFO   IBM_LOG
-#define IBM_DEBUG  KERN_DEBUG  IBM_LOG
-
-#define IBM_MAX_ACPI_ARGS 3
-
-#define __unused __attribute__ ((unused))
-
-static int experimental;
-module_param(experimental, int, 0);
-
-static acpi_handle root_handle = NULL;
-
-#define IBM_HANDLE(object, parent, paths...)			\
-	static acpi_handle  object##_handle;			\
-	static acpi_handle *object##_parent = &parent##_handle;	\
-	static char        *object##_path;			\
-	static char        *object##_paths[] = { paths }
-
-IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0",	/* 240, 240x */
-	   "\\_SB.PCI.ISA.EC",	/* 570 */
-	   "\\_SB.PCI0.ISA0.EC0",	/* 600e/x, 770e, 770x */
-	   "\\_SB.PCI0.ISA.EC",	/* A21e, A2xm/p, T20-22, X20-21 */
-	   "\\_SB.PCI0.AD4S.EC0",	/* i1400, R30 */
-	   "\\_SB.PCI0.ICH3.EC0",	/* R31 */
-	   "\\_SB.PCI0.LPC.EC",	/* all others */
-    );
-
-IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA",	/* 570 */
-	   "\\_SB.PCI0.AGP0.VID0",	/* 600e/x, 770x */
-	   "\\_SB.PCI0.VID0",	/* 770e */
-	   "\\_SB.PCI0.VID",	/* A21e, G4x, R50e, X30, X40 */
-	   "\\_SB.PCI0.AGP.VID",	/* all others */
-    );				/* R30, R31 */
-
-IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID");	/* G41 */
-
-IBM_HANDLE(cmos, root, "\\UCMS",	/* R50, R50e, R50p, R51, T4x, X31, X40 */
-	   "\\CMOS",		/* A3x, G4x, R32, T23, T30, X22-24, X30 */
-	   "\\CMS",		/* R40, R40e */
-    );				/* all others */
-#ifdef CONFIG_ACPI_IBM_DOCK
-IBM_HANDLE(dock, root, "\\_SB.GDCK",	/* X30, X31, X40 */
-	   "\\_SB.PCI0.DOCK",	/* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
-	   "\\_SB.PCI0.PCI1.DOCK",	/* all others */
-	   "\\_SB.PCI.ISA.SLCE",	/* 570 */
-    );				/* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST",	/* 570 */
-	   "\\_SB.PCI0.IDE0.IDES.IDSM",	/* 600e/x, 770e, 770x */
-	   "\\_SB.PCI0.SATA.SCND.MSTR",	/* T60, X60, Z60 */ 
-	   "\\_SB.PCI0.IDE0.SCND.MSTR",	/* all others */
-    );				/* A21e, R30, R31 */
-
-IBM_HANDLE(bay_ej, bay, "_EJ3",	/* 600e/x, A2xm/p, A3x */
-	   "_EJ0",		/* all others */
-    );				/* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
-
-IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV",	/* A3x, R32 */
-	   "\\_SB.PCI0.IDE0.IDEP.IDPS",	/* 600e/x, 770e, 770x */
-    );				/* all others */
-
-IBM_HANDLE(bay2_ej, bay2, "_EJ3",	/* 600e/x, 770e, A3x */
-	   "_EJ0",		/* 770x */
-    );				/* all others */
-#endif /* CONFIG_ACPI_IBM_BAY */
-
-/* don't list other alternatives as we install a notify handler on the 570 */
-IBM_HANDLE(pci, root, "\\_SB.PCI");	/* 570 */
-
-IBM_HANDLE(hkey, ec, "\\_SB.HKEY",	/* 600e/x, 770e, 770x */
-	   "^HKEY",		/* R30, R31 */
-	   "HKEY",		/* all others */
-    );				/* 570 */
-
-IBM_HANDLE(lght, root, "\\LGHT");	/* A21e, A2xm/p, T20-22, X20-21 */
-IBM_HANDLE(ledb, ec, "LEDB");	/* G4x */
-
-IBM_HANDLE(led, ec, "SLED",	/* 570 */
-	   "SYSL",		/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
-	   "LED",		/* all others */
-    );				/* R30, R31 */
-
-IBM_HANDLE(beep, ec, "BEEP");	/* all except R30, R31 */
-IBM_HANDLE(ecrd, ec, "ECRD");	/* 570 */
-IBM_HANDLE(ecwr, ec, "ECWR");	/* 570 */
-IBM_HANDLE(fans, ec, "FANS");	/* X31, X40, X41 */
-
-IBM_HANDLE(gfan, ec, "GFAN",	/* 570 */
-	   "\\FSPD",		/* 600e/x, 770e, 770x */
-    );				/* all others */
-
-IBM_HANDLE(sfan, ec, "SFAN",	/* 570 */
-	   "JFNS",		/* 770x-JL */
-    );				/* all others */
-
-#define IBM_HKEY_HID	"IBM0068"
-#define IBM_PCI_HID	"PNP0A03"
-
-enum thermal_access_mode {
-	IBMACPI_THERMAL_NONE = 0,	/* No thermal support */
-	IBMACPI_THERMAL_ACPI_TMP07,	/* Use ACPI TMP0-7 */
-	IBMACPI_THERMAL_ACPI_UPDT,	/* Use ACPI TMP0-7 with UPDT */
-	IBMACPI_THERMAL_TPEC_8,		/* Use ACPI EC regs, 8 sensors */
-	IBMACPI_THERMAL_TPEC_16,	/* Use ACPI EC regs, 16 sensors */
-};
-
-#define IBMACPI_MAX_THERMAL_SENSORS 16	/* Max thermal sensors supported */
-struct ibm_thermal_sensors_struct {
-	s32 temp[IBMACPI_MAX_THERMAL_SENSORS];
-};
-
-/*
- * FAN ACCESS MODES
- *
- * IBMACPI_FAN_RD_ACPI_GFAN:
- * 	ACPI GFAN method: returns fan level
- *
- * 	see IBMACPI_FAN_WR_ACPI_SFAN
- * 	EC 0x2f not available if GFAN exists
- *
- * IBMACPI_FAN_WR_ACPI_SFAN:
- * 	ACPI SFAN method: sets fan level, 0 (stop) to 7 (max)
- *
- * 	EC 0x2f might be available *for reading*, but never for writing.
- *
- * IBMACPI_FAN_WR_TPEC:
- * 	ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported
- * 	on almost all ThinkPads
- *
- * 	Fan speed changes of any sort (including those caused by the
- * 	disengaged mode) are usually done slowly by the firmware as the
- * 	maximum ammount of fan duty cycle change per second seems to be
- * 	limited.
- *
- * 	Reading is not available if GFAN exists.
- * 	Writing is not available if SFAN exists.
- *
- * 	Bits
- *	 7	automatic mode engaged;
- *  		(default operation mode of the ThinkPad)
- * 		fan level is ignored in this mode.
- *	 6	disengage mode (takes precedence over bit 7);
- *		not available on all thinkpads.  May disable
- *		the tachometer, and speeds up fan to 100% duty-cycle,
- *		which speeds it up far above the standard RPM
- *		levels.  It is not impossible that it could cause
- *		hardware damage.
- *	5-3	unused in some models.  Extra bits for fan level
- *		in others, but still useless as all values above
- *		7 map to the same speed as level 7 in these models.
- *	2-0	fan level (0..7 usually)
- *			0x00 = stop
- * 			0x07 = max (set when temperatures critical)
- * 		Some ThinkPads may have other levels, see
- * 		IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
- *
- *	FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
- *	boot. Apparently the EC does not intialize it, so unless ACPI DSDT
- *	does so, its initial value is meaningless (0x07).
- *
- *	For firmware bugs, refer to:
- *	http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
- *
- * 	----
- *
- *	ThinkPad EC register 0x84 (LSB), 0x85 (MSB):
- *	Main fan tachometer reading (in RPM)
- *
- *	This register is present on all ThinkPads with a new-style EC, and
- *	it is known not to be present on the A21m/e, and T22, as there is
- *	something else in offset 0x84 according to the ACPI DSDT.  Other
- *	ThinkPads from this same time period (and earlier) probably lack the
- *	tachometer as well.
- *
- *	Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
- *	was never fixed by IBM to report the EC firmware version string
- *	probably support the tachometer (like the early X models), so
- *	detecting it is quite hard.  We need more data to know for sure.
- *
- *	FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings
- *	might result.
- *
- *	FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this
- *	register is not invalidated in ThinkPads that disable tachometer
- *	readings.  Thus, the tachometer readings go stale.
- *
- *	For firmware bugs, refer to:
- *	http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
- *
- * IBMACPI_FAN_WR_ACPI_FANS:
- *	ThinkPad X31, X40, X41.  Not available in the X60.
- *
- *	FANS ACPI handle: takes three arguments: low speed, medium speed,
- *	high speed.  ACPI DSDT seems to map these three speeds to levels
- *	as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH
- *	(this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3")
- *
- * 	The speeds are stored on handles
- * 	(FANA:FAN9), (FANC:FANB), (FANE:FAND).
- *
- * 	There are three default speed sets, acessible as handles:
- * 	FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
- *
- * 	ACPI DSDT switches which set is in use depending on various
- * 	factors.
- *
- * 	IBMACPI_FAN_WR_TPEC is also available and should be used to
- * 	command the fan.  The X31/X40/X41 seems to have 8 fan levels,
- * 	but the ACPI tables just mention level 7.
- */
-
-enum fan_status_access_mode {
-	IBMACPI_FAN_NONE = 0,		/* No fan status or control */
-	IBMACPI_FAN_RD_ACPI_GFAN,	/* Use ACPI GFAN */
-	IBMACPI_FAN_RD_TPEC,		/* Use ACPI EC regs 0x2f, 0x84-0x85 */
-};
-
-enum fan_control_access_mode {
-	IBMACPI_FAN_WR_NONE = 0,	/* No fan control */
-	IBMACPI_FAN_WR_ACPI_SFAN,	/* Use ACPI SFAN */
-	IBMACPI_FAN_WR_TPEC,		/* Use ACPI EC reg 0x2f */
-	IBMACPI_FAN_WR_ACPI_FANS,	/* Use ACPI FANS and EC reg 0x2f */
-};
-
-enum fan_control_commands {
-	IBMACPI_FAN_CMD_SPEED 	= 0x0001,	/* speed command */
-	IBMACPI_FAN_CMD_LEVEL 	= 0x0002,	/* level command  */
-	IBMACPI_FAN_CMD_ENABLE	= 0x0004,	/* enable/disable cmd,
-						 * and also watchdog cmd */
-};
-
-enum {					/* Fan control constants */
-	fan_status_offset = 0x2f,	/* EC register 0x2f */
-	fan_rpm_offset = 0x84,		/* EC register 0x84: LSB, 0x85 MSB (RPM)
-					 * 0x84 must be read before 0x85 */
-
-	IBMACPI_FAN_EC_DISENGAGED 	= 0x40,	/* EC mode: tachometer
-						 * disengaged */
-	IBMACPI_FAN_EC_AUTO		= 0x80, /* EC mode: auto fan
-						 * control */
-};
-
-static char *ibm_thinkpad_ec_found = NULL;
-
-struct ibm_struct {
-	char *name;
-	char param[32];
-
-	char *hid;
-	struct acpi_driver *driver;
-
-	int (*init) (void);
-	int (*read) (char *);
-	int (*write) (char *);
-	void (*exit) (void);
-
-	void (*notify) (struct ibm_struct *, u32);
-	acpi_handle *handle;
-	int type;
-	struct acpi_device *device;
-
-	int driver_registered;
-	int proc_created;
-	int init_called;
-	int notify_installed;
-
-	int experimental;
-};
-
-static struct proc_dir_entry *proc_dir = NULL;
-
-static struct backlight_device *ibm_backlight_device = NULL;
-
-#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
-#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
-#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
-
-static int acpi_evalf(acpi_handle handle,
-		      void *res, char *method, char *fmt, ...)
-{
-	char *fmt0 = fmt;
-	struct acpi_object_list params;
-	union acpi_object in_objs[IBM_MAX_ACPI_ARGS];
-	struct acpi_buffer result, *resultp;
-	union acpi_object out_obj;
-	acpi_status status;
-	va_list ap;
-	char res_type;
-	int success;
-	int quiet;
-
-	if (!*fmt) {
-		printk(IBM_ERR "acpi_evalf() called with empty format\n");
-		return 0;
-	}
-
-	if (*fmt == 'q') {
-		quiet = 1;
-		fmt++;
-	} else
-		quiet = 0;
-
-	res_type = *(fmt++);
-
-	params.count = 0;
-	params.pointer = &in_objs[0];
-
-	va_start(ap, fmt);
-	while (*fmt) {
-		char c = *(fmt++);
-		switch (c) {
-		case 'd':	/* int */
-			in_objs[params.count].integer.value = va_arg(ap, int);
-			in_objs[params.count++].type = ACPI_TYPE_INTEGER;
-			break;
-			/* add more types as needed */
-		default:
-			printk(IBM_ERR "acpi_evalf() called "
-			       "with invalid format character '%c'\n", c);
-			return 0;
-		}
-	}
-	va_end(ap);
-
-	if (res_type != 'v') {
-		result.length = sizeof(out_obj);
-		result.pointer = &out_obj;
-		resultp = &result;
-	} else
-		resultp = NULL;
-
-	status = acpi_evaluate_object(handle, method, &params, resultp);
-
-	switch (res_type) {
-	case 'd':		/* int */
-		if (res)
-			*(int *)res = out_obj.integer.value;
-		success = status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER;
-		break;
-	case 'v':		/* void */
-		success = status == AE_OK;
-		break;
-		/* add more types as needed */
-	default:
-		printk(IBM_ERR "acpi_evalf() called "
-		       "with invalid format character '%c'\n", res_type);
-		return 0;
-	}
-
-	if (!success && !quiet)
-		printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n",
-		       method, fmt0, status);
-
-	return success;
-}
-
-static void __unused acpi_print_int(acpi_handle handle, char *method)
-{
-	int i;
-
-	if (acpi_evalf(handle, &i, method, "d"))
-		printk(IBM_INFO "%s = 0x%x\n", method, i);
-	else
-		printk(IBM_ERR "error calling %s\n", method);
-}
-
-static char *next_cmd(char **cmds)
-{
-	char *start = *cmds;
-	char *end;
-
-	while ((end = strchr(start, ',')) && end == start)
-		start = end + 1;
-
-	if (!end)
-		return NULL;
-
-	*end = 0;
-	*cmds = end + 1;
-	return start;
-}
-
-static int ibm_acpi_driver_init(void)
-{
-	printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
-	printk(IBM_INFO "%s\n", IBM_URL);
-
-	if (ibm_thinkpad_ec_found)
-		printk(IBM_INFO "ThinkPad EC firmware %s\n",
-		       ibm_thinkpad_ec_found);
-
-	return 0;
-}
-
-static int driver_read(char *p)
-{
-	int len = 0;
-
-	len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC);
-	len += sprintf(p + len, "version:\t%s\n", IBM_VERSION);
-
-	return len;
-}
-
-static int hotkey_supported;
-static int hotkey_mask_supported;
-static int hotkey_orig_status;
-static int hotkey_orig_mask;
-
-static int hotkey_get(int *status, int *mask)
-{
-	if (!acpi_evalf(hkey_handle, status, "DHKC", "d"))
-		return 0;
-
-	if (hotkey_mask_supported)
-		if (!acpi_evalf(hkey_handle, mask, "DHKN", "d"))
-			return 0;
-
-	return 1;
-}
-
-static int hotkey_set(int status, int mask)
-{
-	int i;
-
-	if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status))
-		return 0;
-
-	if (hotkey_mask_supported)
-		for (i = 0; i < 32; i++) {
-			int bit = ((1 << i) & mask) != 0;
-			if (!acpi_evalf(hkey_handle,
-					NULL, "MHKM", "vdd", i + 1, bit))
-				return 0;
-		}
-
-	return 1;
-}
-
-static int hotkey_init(void)
-{
-	/* hotkey not supported on 570 */
-	hotkey_supported = hkey_handle != NULL;
-
-	if (hotkey_supported) {
-		/* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
-		   A30, R30, R31, T20-22, X20-21, X22-24 */
-		hotkey_mask_supported =
-		    acpi_evalf(hkey_handle, NULL, "DHKN", "qv");
-
-		if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask))
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int hotkey_read(char *p)
-{
-	int status, mask;
-	int len = 0;
-
-	if (!hotkey_supported) {
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-		return len;
-	}
-
-	if (!hotkey_get(&status, &mask))
-		return -EIO;
-
-	len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
-	if (hotkey_mask_supported) {
-		len += sprintf(p + len, "mask:\t\t0x%04x\n", mask);
-		len += sprintf(p + len,
-			       "commands:\tenable, disable, reset, <mask>\n");
-	} else {
-		len += sprintf(p + len, "mask:\t\tnot supported\n");
-		len += sprintf(p + len, "commands:\tenable, disable, reset\n");
-	}
-
-	return len;
-}
-
-static int hotkey_write(char *buf)
-{
-	int status, mask;
-	char *cmd;
-	int do_cmd = 0;
-
-	if (!hotkey_supported)
-		return -ENODEV;
-
-	if (!hotkey_get(&status, &mask))
-		return -EIO;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "enable") == 0) {
-			status = 1;
-		} else if (strlencmp(cmd, "disable") == 0) {
-			status = 0;
-		} else if (strlencmp(cmd, "reset") == 0) {
-			status = hotkey_orig_status;
-			mask = hotkey_orig_mask;
-		} else if (sscanf(cmd, "0x%x", &mask) == 1) {
-			/* mask set */
-		} else if (sscanf(cmd, "%x", &mask) == 1) {
-			/* mask set */
-		} else
-			return -EINVAL;
-		do_cmd = 1;
-	}
-
-	if (do_cmd && !hotkey_set(status, mask))
-		return -EIO;
-
-	return 0;
-}
-
-static void hotkey_exit(void)
-{
-	if (hotkey_supported)
-		hotkey_set(hotkey_orig_status, hotkey_orig_mask);
-}
-
-static void hotkey_notify(struct ibm_struct *ibm, u32 event)
-{
-	int hkey;
-
-	if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d"))
-		acpi_bus_generate_event(ibm->device, event, hkey);
-	else {
-		printk(IBM_ERR "unknown hotkey event %d\n", event);
-		acpi_bus_generate_event(ibm->device, event, 0);
-	}
-}
-
-static int bluetooth_supported;
-
-static int bluetooth_init(void)
-{
-	/* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
-	   G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
-	bluetooth_supported = hkey_handle &&
-	    acpi_evalf(hkey_handle, NULL, "GBDC", "qv");
-
-	return 0;
-}
-
-static int bluetooth_status(void)
-{
-	int status;
-
-	if (!bluetooth_supported ||
-	    !acpi_evalf(hkey_handle, &status, "GBDC", "d"))
-		status = 0;
-
-	return status;
-}
-
-static int bluetooth_read(char *p)
-{
-	int len = 0;
-	int status = bluetooth_status();
-
-	if (!bluetooth_supported)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else if (!(status & 1))
-		len += sprintf(p + len, "status:\t\tnot installed\n");
-	else {
-		len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
-		len += sprintf(p + len, "commands:\tenable, disable\n");
-	}
-
-	return len;
-}
-
-static int bluetooth_write(char *buf)
-{
-	int status = bluetooth_status();
-	char *cmd;
-	int do_cmd = 0;
-
-	if (!bluetooth_supported)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "enable") == 0) {
-			status |= 2;
-		} else if (strlencmp(cmd, "disable") == 0) {
-			status &= ~2;
-		} else
-			return -EINVAL;
-		do_cmd = 1;
-	}
-
-	if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
-		return -EIO;
-
-	return 0;
-}
-
-static int wan_supported;
-
-static int wan_init(void)
-{
-	wan_supported = hkey_handle &&
-	    acpi_evalf(hkey_handle, NULL, "GWAN", "qv");
-
-	return 0;
-}
-
-static int wan_status(void)
-{
-	int status;
-
-	if (!wan_supported || !acpi_evalf(hkey_handle, &status, "GWAN", "d"))
-		status = 0;
-
-	return status;
-}
-
-static int wan_read(char *p)
-{
-	int len = 0;
-	int status = wan_status();
-
-	if (!wan_supported)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else if (!(status & 1))
-		len += sprintf(p + len, "status:\t\tnot installed\n");
-	else {
-		len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
-		len += sprintf(p + len, "commands:\tenable, disable\n");
-	}
-
-	return len;
-}
-
-static int wan_write(char *buf)
-{
-	int status = wan_status();
-	char *cmd;
-	int do_cmd = 0;
-
-	if (!wan_supported)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "enable") == 0) {
-			status |= 2;
-		} else if (strlencmp(cmd, "disable") == 0) {
-			status &= ~2;
-		} else
-			return -EINVAL;
-		do_cmd = 1;
-	}
-
-	if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
-		return -EIO;
-
-	return 0;
-}
-
-enum video_access_mode {
-	IBMACPI_VIDEO_NONE = 0,
-	IBMACPI_VIDEO_570,	/* 570 */
-	IBMACPI_VIDEO_770,	/* 600e/x, 770e, 770x */
-	IBMACPI_VIDEO_NEW,	/* all others */
-};
-
-static enum video_access_mode video_supported;
-static int video_orig_autosw;
-
-static int video_init(void)
-{
-	int ivga;
-
-	if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga)
-		/* G41, assume IVGA doesn't change */
-		vid_handle = vid2_handle;
-
-	if (!vid_handle)
-		/* video switching not supported on R30, R31 */
-		video_supported = IBMACPI_VIDEO_NONE;
-	else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd"))
-		/* 570 */
-		video_supported = IBMACPI_VIDEO_570;
-	else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd"))
-		/* 600e/x, 770e, 770x */
-		video_supported = IBMACPI_VIDEO_770;
-	else
-		/* all others */
-		video_supported = IBMACPI_VIDEO_NEW;
-
-	return 0;
-}
-
-static int video_status(void)
-{
-	int status = 0;
-	int i;
-
-	if (video_supported == IBMACPI_VIDEO_570) {
-		if (acpi_evalf(NULL, &i, "\\_SB.PHS", "dd", 0x87))
-			status = i & 3;
-	} else if (video_supported == IBMACPI_VIDEO_770) {
-		if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
-			status |= 0x01 * i;
-		if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
-			status |= 0x02 * i;
-	} else if (video_supported == IBMACPI_VIDEO_NEW) {
-		acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1);
-		if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
-			status |= 0x02 * i;
-
-		acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0);
-		if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
-			status |= 0x01 * i;
-		if (acpi_evalf(NULL, &i, "\\VCDD", "d"))
-			status |= 0x08 * i;
-	}
-
-	return status;
-}
-
-static int video_autosw(void)
-{
-	int autosw = 0;
-
-	if (video_supported == IBMACPI_VIDEO_570)
-		acpi_evalf(vid_handle, &autosw, "SWIT", "d");
-	else if (video_supported == IBMACPI_VIDEO_770 ||
-		 video_supported == IBMACPI_VIDEO_NEW)
-		acpi_evalf(vid_handle, &autosw, "^VDEE", "d");
-
-	return autosw & 1;
-}
-
-static int video_read(char *p)
-{
-	int status = video_status();
-	int autosw = video_autosw();
-	int len = 0;
-
-	if (!video_supported) {
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-		return len;
-	}
-
-	len += sprintf(p + len, "status:\t\tsupported\n");
-	len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
-	len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
-	if (video_supported == IBMACPI_VIDEO_NEW)
-		len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
-	len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
-	len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
-	len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
-	if (video_supported == IBMACPI_VIDEO_NEW)
-		len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
-	len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
-	len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
-
-	return len;
-}
-
-static int video_switch(void)
-{
-	int autosw = video_autosw();
-	int ret;
-
-	if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
-		return -EIO;
-	ret = video_supported == IBMACPI_VIDEO_570 ?
-	    acpi_evalf(ec_handle, NULL, "_Q16", "v") :
-	    acpi_evalf(vid_handle, NULL, "VSWT", "v");
-	acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
-
-	return ret;
-}
-
-static int video_expand(void)
-{
-	if (video_supported == IBMACPI_VIDEO_570)
-		return acpi_evalf(ec_handle, NULL, "_Q17", "v");
-	else if (video_supported == IBMACPI_VIDEO_770)
-		return acpi_evalf(vid_handle, NULL, "VEXP", "v");
-	else
-		return acpi_evalf(NULL, NULL, "\\VEXP", "v");
-}
-
-static int video_switch2(int status)
-{
-	int ret;
-
-	if (video_supported == IBMACPI_VIDEO_570) {
-		ret = acpi_evalf(NULL, NULL,
-				 "\\_SB.PHS2", "vdd", 0x8b, status | 0x80);
-	} else if (video_supported == IBMACPI_VIDEO_770) {
-		int autosw = video_autosw();
-		if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
-			return -EIO;
-
-		ret = acpi_evalf(vid_handle, NULL,
-				 "ASWT", "vdd", status * 0x100, 0);
-
-		acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
-	} else {
-		ret = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) &&
-		    acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1);
-	}
-
-	return ret;
-}
-
-static int video_write(char *buf)
-{
-	char *cmd;
-	int enable, disable, status;
-
-	if (!video_supported)
-		return -ENODEV;
-
-	enable = disable = 0;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "lcd_enable") == 0) {
-			enable |= 0x01;
-		} else if (strlencmp(cmd, "lcd_disable") == 0) {
-			disable |= 0x01;
-		} else if (strlencmp(cmd, "crt_enable") == 0) {
-			enable |= 0x02;
-		} else if (strlencmp(cmd, "crt_disable") == 0) {
-			disable |= 0x02;
-		} else if (video_supported == IBMACPI_VIDEO_NEW &&
-			   strlencmp(cmd, "dvi_enable") == 0) {
-			enable |= 0x08;
-		} else if (video_supported == IBMACPI_VIDEO_NEW &&
-			   strlencmp(cmd, "dvi_disable") == 0) {
-			disable |= 0x08;
-		} else if (strlencmp(cmd, "auto_enable") == 0) {
-			if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
-				return -EIO;
-		} else if (strlencmp(cmd, "auto_disable") == 0) {
-			if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 0))
-				return -EIO;
-		} else if (strlencmp(cmd, "video_switch") == 0) {
-			if (!video_switch())
-				return -EIO;
-		} else if (strlencmp(cmd, "expand_toggle") == 0) {
-			if (!video_expand())
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	if (enable || disable) {
-		status = (video_status() & 0x0f & ~disable) | enable;
-		if (!video_switch2(status))
-			return -EIO;
-	}
-
-	return 0;
-}
-
-static void video_exit(void)
-{
-	acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw);
-}
-
-static int light_supported;
-static int light_status_supported;
-
-static int light_init(void)
-{
-	/* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */
-	light_supported = (cmos_handle || lght_handle) && !ledb_handle;
-
-	if (light_supported)
-		/* light status not supported on
-		   570, 600e/x, 770e, 770x, G4x, R30, R31, R32, X20 */
-		light_status_supported = acpi_evalf(ec_handle, NULL,
-						    "KBLT", "qv");
-
-	return 0;
-}
-
-static int light_read(char *p)
-{
-	int len = 0;
-	int status = 0;
-
-	if (!light_supported) {
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	} else if (!light_status_supported) {
-		len += sprintf(p + len, "status:\t\tunknown\n");
-		len += sprintf(p + len, "commands:\ton, off\n");
-	} else {
-		if (!acpi_evalf(ec_handle, &status, "KBLT", "d"))
-			return -EIO;
-		len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0));
-		len += sprintf(p + len, "commands:\ton, off\n");
-	}
-
-	return len;
-}
-
-static int light_write(char *buf)
-{
-	int cmos_cmd, lght_cmd;
-	char *cmd;
-	int success;
-
-	if (!light_supported)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "on") == 0) {
-			cmos_cmd = 0x0c;
-			lght_cmd = 1;
-		} else if (strlencmp(cmd, "off") == 0) {
-			cmos_cmd = 0x0d;
-			lght_cmd = 0;
-		} else
-			return -EINVAL;
-
-		success = cmos_handle ?
-		    acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) :
-		    acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd);
-		if (!success)
-			return -EIO;
-	}
-
-	return 0;
-}
-
-#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY)
-static int _sta(acpi_handle handle)
-{
-	int status;
-
-	if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
-		status = 0;
-
-	return status;
-}
-#endif
-
-#ifdef CONFIG_ACPI_IBM_DOCK
-#define dock_docked() (_sta(dock_handle) & 1)
-
-static int dock_read(char *p)
-{
-	int len = 0;
-	int docked = dock_docked();
-
-	if (!dock_handle)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else if (!docked)
-		len += sprintf(p + len, "status:\t\tundocked\n");
-	else {
-		len += sprintf(p + len, "status:\t\tdocked\n");
-		len += sprintf(p + len, "commands:\tdock, undock\n");
-	}
-
-	return len;
-}
-
-static int dock_write(char *buf)
-{
-	char *cmd;
-
-	if (!dock_docked())
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "undock") == 0) {
-			if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
-			    !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
-				return -EIO;
-		} else if (strlencmp(cmd, "dock") == 0) {
-			if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void dock_notify(struct ibm_struct *ibm, u32 event)
-{
-	int docked = dock_docked();
-	int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID);
-
-	if (event == 1 && !pci)	/* 570 */
-		acpi_bus_generate_event(ibm->device, event, 1);	/* button */
-	else if (event == 1 && pci)	/* 570 */
-		acpi_bus_generate_event(ibm->device, event, 3);	/* dock */
-	else if (event == 3 && docked)
-		acpi_bus_generate_event(ibm->device, event, 1);	/* button */
-	else if (event == 3 && !docked)
-		acpi_bus_generate_event(ibm->device, event, 2);	/* undock */
-	else if (event == 0 && docked)
-		acpi_bus_generate_event(ibm->device, event, 3);	/* dock */
-	else {
-		printk(IBM_ERR "unknown dock event %d, status %d\n",
-		       event, _sta(dock_handle));
-		acpi_bus_generate_event(ibm->device, event, 0);	/* unknown */
-	}
-}
-#endif
-
-#ifdef CONFIG_ACPI_IBM_BAY
-static int bay_status_supported;
-static int bay_status2_supported;
-static int bay_eject_supported;
-static int bay_eject2_supported;
-
-static int bay_init(void)
-{
-	bay_status_supported = bay_handle &&
-	    acpi_evalf(bay_handle, NULL, "_STA", "qv");
-	bay_status2_supported = bay2_handle &&
-	    acpi_evalf(bay2_handle, NULL, "_STA", "qv");
-
-	bay_eject_supported = bay_handle && bay_ej_handle &&
-	    (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
-	bay_eject2_supported = bay2_handle && bay2_ej_handle &&
-	    (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
-
-	return 0;
-}
-
-#define bay_occupied(b) (_sta(b##_handle) & 1)
-
-static int bay_read(char *p)
-{
-	int len = 0;
-	int occupied = bay_occupied(bay);
-	int occupied2 = bay_occupied(bay2);
-	int eject, eject2;
-
-	len += sprintf(p + len, "status:\t\t%s\n", bay_status_supported ?
-		       (occupied ? "occupied" : "unoccupied") :
-		       "not supported");
-	if (bay_status2_supported)
-		len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
-			       "occupied" : "unoccupied");
-
-	eject = bay_eject_supported && occupied;
-	eject2 = bay_eject2_supported && occupied2;
-
-	if (eject && eject2)
-		len += sprintf(p + len, "commands:\teject, eject2\n");
-	else if (eject)
-		len += sprintf(p + len, "commands:\teject\n");
-	else if (eject2)
-		len += sprintf(p + len, "commands:\teject2\n");
-
-	return len;
-}
-
-static int bay_write(char *buf)
-{
-	char *cmd;
-
-	if (!bay_eject_supported && !bay_eject2_supported)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (bay_eject_supported && strlencmp(cmd, "eject") == 0) {
-			if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
-				return -EIO;
-		} else if (bay_eject2_supported &&
-			   strlencmp(cmd, "eject2") == 0) {
-			if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void bay_notify(struct ibm_struct *ibm, u32 event)
-{
-	acpi_bus_generate_event(ibm->device, event, 0);
-}
-#endif /* CONFIG_ACPI_IBM_BAY */
-
-static int cmos_read(char *p)
-{
-	int len = 0;
-
-	/* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
-	   R30, R31, T20-22, X20-21 */
-	if (!cmos_handle)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else {
-		len += sprintf(p + len, "status:\t\tsupported\n");
-		len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-21)\n");
-	}
-
-	return len;
-}
-
-static int cmos_eval(int cmos_cmd)
-{
-	if (cmos_handle)
-		return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd);
-	else
-		return 1;
-}
-
-static int cmos_write(char *buf)
-{
-	char *cmd;
-	int cmos_cmd;
-
-	if (!cmos_handle)
-		return -EINVAL;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (sscanf(cmd, "%u", &cmos_cmd) == 1 &&
-		    cmos_cmd >= 0 && cmos_cmd <= 21) {
-			/* cmos_cmd set */
-		} else
-			return -EINVAL;
-
-		if (!cmos_eval(cmos_cmd))
-			return -EIO;
-	}
-
-	return 0;
-}
-
-enum led_access_mode {
-	IBMACPI_LED_NONE = 0,
-	IBMACPI_LED_570,	/* 570 */
-	IBMACPI_LED_OLD,	/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
-	IBMACPI_LED_NEW,	/* all others */
-};
-static enum led_access_mode led_supported;
-
-static int led_init(void)
-{
-	if (!led_handle)
-		/* led not supported on R30, R31 */
-		led_supported = IBMACPI_LED_NONE;
-	else if (strlencmp(led_path, "SLED") == 0)
-		/* 570 */
-		led_supported = IBMACPI_LED_570;
-	else if (strlencmp(led_path, "SYSL") == 0)
-		/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
-		led_supported = IBMACPI_LED_OLD;
-	else
-		/* all others */
-		led_supported = IBMACPI_LED_NEW;
-
-	return 0;
-}
-
-#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking"))
-
-static int led_read(char *p)
-{
-	int len = 0;
-
-	if (!led_supported) {
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-		return len;
-	}
-	len += sprintf(p + len, "status:\t\tsupported\n");
-
-	if (led_supported == IBMACPI_LED_570) {
-		/* 570 */
-		int i, status;
-		for (i = 0; i < 8; i++) {
-			if (!acpi_evalf(ec_handle,
-					&status, "GLED", "dd", 1 << i))
-				return -EIO;
-			len += sprintf(p + len, "%d:\t\t%s\n",
-				       i, led_status(status));
-		}
-	}
-
-	len += sprintf(p + len, "commands:\t"
-		       "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
-
-	return len;
-}
-
-/* off, on, blink */
-static const int led_sled_arg1[] = { 0, 1, 3 };
-static const int led_exp_hlbl[] = { 0, 0, 1 };	/* led# * */
-static const int led_exp_hlcl[] = { 0, 1, 1 };	/* led# * */
-static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
-
-#define EC_HLCL 0x0c
-#define EC_HLBL 0x0d
-#define EC_HLMS 0x0e
-
-static int led_write(char *buf)
-{
-	char *cmd;
-	int led, ind, ret;
-
-	if (!led_supported)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
-			return -EINVAL;
-
-		if (strstr(cmd, "off")) {
-			ind = 0;
-		} else if (strstr(cmd, "on")) {
-			ind = 1;
-		} else if (strstr(cmd, "blink")) {
-			ind = 2;
-		} else
-			return -EINVAL;
-
-		if (led_supported == IBMACPI_LED_570) {
-			/* 570 */
-			led = 1 << led;
-			if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
-					led, led_sled_arg1[ind]))
-				return -EIO;
-		} else if (led_supported == IBMACPI_LED_OLD) {
-			/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
-			led = 1 << led;
-			ret = ec_write(EC_HLMS, led);
-			if (ret >= 0)
-				ret =
-				    ec_write(EC_HLBL, led * led_exp_hlbl[ind]);
-			if (ret >= 0)
-				ret =
-				    ec_write(EC_HLCL, led * led_exp_hlcl[ind]);
-			if (ret < 0)
-				return ret;
-		} else {
-			/* all others */
-			if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
-					led, led_led_arg1[ind]))
-				return -EIO;
-		}
-	}
-
-	return 0;
-}
-
-static int beep_read(char *p)
-{
-	int len = 0;
-
-	if (!beep_handle)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else {
-		len += sprintf(p + len, "status:\t\tsupported\n");
-		len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-17)\n");
-	}
-
-	return len;
-}
-
-static int beep_write(char *buf)
-{
-	char *cmd;
-	int beep_cmd;
-
-	if (!beep_handle)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (sscanf(cmd, "%u", &beep_cmd) == 1 &&
-		    beep_cmd >= 0 && beep_cmd <= 17) {
-			/* beep_cmd set */
-		} else
-			return -EINVAL;
-		if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
-			return -EIO;
-	}
-
-	return 0;
-}
-
-static int acpi_ec_read(int i, u8 * p)
-{
-	int v;
-
-	if (ecrd_handle) {
-		if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i))
-			return 0;
-		*p = v;
-	} else {
-		if (ec_read(i, p) < 0)
-			return 0;
-	}
-
-	return 1;
-}
-
-static int acpi_ec_write(int i, u8 v)
-{
-	if (ecwr_handle) {
-		if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v))
-			return 0;
-	} else {
-		if (ec_write(i, v) < 0)
-			return 0;
-	}
-
-	return 1;
-}
-
-static enum thermal_access_mode thermal_read_mode;
-
-static int thermal_init(void)
-{
-	u8 t, ta1, ta2;
-	int i;
-	int acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
-
-	if (ibm_thinkpad_ec_found && experimental) {
-		/*
-		 * Direct EC access mode: sensors at registers
-		 * 0x78-0x7F, 0xC0-0xC7.  Registers return 0x00 for
-		 * non-implemented, thermal sensors return 0x80 when
-		 * not available
-		 */
-
-		ta1 = ta2 = 0;
-		for (i = 0; i < 8; i++) {
-			if (likely(acpi_ec_read(0x78 + i, &t))) {
-				ta1 |= t;
-			} else {
-				ta1 = 0;
-				break;
-			}
-			if (likely(acpi_ec_read(0xC0 + i, &t))) {
-				ta2 |= t;
-			} else {
-				ta1 = 0;
-				break;
-			}
-		}
-		if (ta1 == 0) {
-			/* This is sheer paranoia, but we handle it anyway */
-			if (acpi_tmp7) {
-				printk(IBM_ERR
-				       "ThinkPad ACPI EC access misbehaving, "
-				       "falling back to ACPI TMPx access mode\n");
-				thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
-			} else {
-				printk(IBM_ERR
-				       "ThinkPad ACPI EC access misbehaving, "
-				       "disabling thermal sensors access\n");
-				thermal_read_mode = IBMACPI_THERMAL_NONE;
-			}
-		} else {
-			thermal_read_mode =
-			    (ta2 != 0) ?
-			    IBMACPI_THERMAL_TPEC_16 : IBMACPI_THERMAL_TPEC_8;
-		}
-	} else if (acpi_tmp7) {
-		if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) {
-			/* 600e/x, 770e, 770x */
-			thermal_read_mode = IBMACPI_THERMAL_ACPI_UPDT;
-		} else {
-			/* Standard ACPI TMPx access, max 8 sensors */
-			thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
-		}
-	} else {
-		/* temperatures not supported on 570, G4x, R30, R31, R32 */
-		thermal_read_mode = IBMACPI_THERMAL_NONE;
-	}
-
-	return 0;
-}
-
-static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
-{
-	int i, t;
-	s8 tmp;
-	char tmpi[] = "TMPi";
-
-	if (!s)
-		return -EINVAL;
-
-	switch (thermal_read_mode) {
-#if IBMACPI_MAX_THERMAL_SENSORS >= 16
-	case IBMACPI_THERMAL_TPEC_16:
-		for (i = 0; i < 8; i++) {
-			if (!acpi_ec_read(0xC0 + i, &tmp))
-				return -EIO;
-			s->temp[i + 8] = tmp * 1000;
-		}
-		/* fallthrough */
-#endif
-	case IBMACPI_THERMAL_TPEC_8:
-		for (i = 0; i < 8; i++) {
-			if (!acpi_ec_read(0x78 + i, &tmp))
-				return -EIO;
-			s->temp[i] = tmp * 1000;
-		}
-		return (thermal_read_mode == IBMACPI_THERMAL_TPEC_16) ? 16 : 8;
-
-	case IBMACPI_THERMAL_ACPI_UPDT:
-		if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
-			return -EIO;
-		for (i = 0; i < 8; i++) {
-			tmpi[3] = '0' + i;
-			if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
-				return -EIO;
-			s->temp[i] = (t - 2732) * 100;
-		}
-		return 8;
-
-	case IBMACPI_THERMAL_ACPI_TMP07:
-		for (i = 0; i < 8; i++) {
-			tmpi[3] = '0' + i;
-			if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
-				return -EIO;
-			s->temp[i] = t * 1000;
-		}
-		return 8;
-
-	case IBMACPI_THERMAL_NONE:
-	default:
-		return 0;
-	}
-}
-
-static int thermal_read(char *p)
-{
-	int len = 0;
-	int n, i;
-	struct ibm_thermal_sensors_struct t;
-
-	n = thermal_get_sensors(&t);
-	if (unlikely(n < 0))
-		return n;
-
-	len += sprintf(p + len, "temperatures:\t");
-
-	if (n > 0) {
-		for (i = 0; i < (n - 1); i++)
-			len += sprintf(p + len, "%d ", t.temp[i] / 1000);
-		len += sprintf(p + len, "%d\n", t.temp[i] / 1000);
-	} else
-		len += sprintf(p + len, "not supported\n");
-
-	return len;
-}
-
-static u8 ecdump_regs[256];
-
-static int ecdump_read(char *p)
-{
-	int len = 0;
-	int i, j;
-	u8 v;
-
-	len += sprintf(p + len, "EC      "
-		       " +00 +01 +02 +03 +04 +05 +06 +07"
-		       " +08 +09 +0a +0b +0c +0d +0e +0f\n");
-	for (i = 0; i < 256; i += 16) {
-		len += sprintf(p + len, "EC 0x%02x:", i);
-		for (j = 0; j < 16; j++) {
-			if (!acpi_ec_read(i + j, &v))
-				break;
-			if (v != ecdump_regs[i + j])
-				len += sprintf(p + len, " *%02x", v);
-			else
-				len += sprintf(p + len, "  %02x", v);
-			ecdump_regs[i + j] = v;
-		}
-		len += sprintf(p + len, "\n");
-		if (j != 16)
-			break;
-	}
-
-	/* These are way too dangerous to advertise openly... */
-#if 0
-	len += sprintf(p + len, "commands:\t0x<offset> 0x<value>"
-		       " (<offset> is 00-ff, <value> is 00-ff)\n");
-	len += sprintf(p + len, "commands:\t0x<offset> <value>  "
-		       " (<offset> is 00-ff, <value> is 0-255)\n");
-#endif
-	return len;
-}
-
-static int ecdump_write(char *buf)
-{
-	char *cmd;
-	int i, v;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) {
-			/* i and v set */
-		} else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) {
-			/* i and v set */
-		} else
-			return -EINVAL;
-		if (i >= 0 && i < 256 && v >= 0 && v < 256) {
-			if (!acpi_ec_write(i, v))
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int brightness_offset = 0x31;
-
-static int brightness_get(struct backlight_device *bd)
-{
-	u8 level;
-	if (!acpi_ec_read(brightness_offset, &level))
-		return -EIO;
-
-	level &= 0x7;
-
-	return level;
-}
-
-static int brightness_read(char *p)
-{
-	int len = 0;
-	int level;
-
-	if ((level = brightness_get(NULL)) < 0) {
-		len += sprintf(p + len, "level:\t\tunreadable\n");
-	} else {
-		len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
-		len += sprintf(p + len, "commands:\tup, down\n");
-		len += sprintf(p + len, "commands:\tlevel <level>"
-			       " (<level> is 0-7)\n");
-	}
-
-	return len;
-}
-
-#define BRIGHTNESS_UP	4
-#define BRIGHTNESS_DOWN	5
-
-static int brightness_set(int value)
-{
-	int cmos_cmd, inc, i;
-	int current_value = brightness_get(NULL);
-
-	value &= 7;
-
-	cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN;
-	inc = value > current_value ? 1 : -1;
-	for (i = current_value; i != value; i += inc) {
-		if (!cmos_eval(cmos_cmd))
-			return -EIO;
-		if (!acpi_ec_write(brightness_offset, i + inc))
-			return -EIO;
-	}
-
-	return 0;
-}
-
-static int brightness_write(char *buf)
-{
-	int level;
-	int new_level;
-	char *cmd;
-
-	while ((cmd = next_cmd(&buf))) {
-		if ((level = brightness_get(NULL)) < 0)
-			return level;
-		level &= 7;
-
-		if (strlencmp(cmd, "up") == 0) {
-			new_level = level == 7 ? 7 : level + 1;
-		} else if (strlencmp(cmd, "down") == 0) {
-			new_level = level == 0 ? 0 : level - 1;
-		} else if (sscanf(cmd, "level %d", &new_level) == 1 &&
-			   new_level >= 0 && new_level <= 7) {
-			/* new_level set */
-		} else
-			return -EINVAL;
-
-		brightness_set(new_level);
-	}
-
-	return 0;
-}
-
-static int brightness_update_status(struct backlight_device *bd)
-{
-	return brightness_set(
-		(bd->props.fb_blank == FB_BLANK_UNBLANK &&
-		 bd->props.power == FB_BLANK_UNBLANK) ?
-				bd->props.brightness : 0);
-}
-
-static struct backlight_ops ibm_backlight_data = {
-        .get_brightness = brightness_get,
-        .update_status  = brightness_update_status,
-};
-
-static int brightness_init(void)
-{
-	int b;
-
-	b = brightness_get(NULL);
-	if (b < 0)
-		return b;
-
-	ibm_backlight_device = backlight_device_register("ibm", NULL, NULL,
-							 &ibm_backlight_data);
-	if (IS_ERR(ibm_backlight_device)) {
-		printk(IBM_ERR "Could not register backlight device\n");
-		return PTR_ERR(ibm_backlight_device);
-	}
-
-	ibm_backlight_device->props.max_brightness = 7;
-	ibm_backlight_device->props.brightness = b;
-	backlight_update_status(ibm_backlight_device);
-
-	return 0;
-}
-
-static void brightness_exit(void)
-{
-	if (ibm_backlight_device) {
-		backlight_device_unregister(ibm_backlight_device);
-		ibm_backlight_device = NULL;
-	}
-}
-
-static int volume_offset = 0x30;
-
-static int volume_read(char *p)
-{
-	int len = 0;
-	u8 level;
-
-	if (!acpi_ec_read(volume_offset, &level)) {
-		len += sprintf(p + len, "level:\t\tunreadable\n");
-	} else {
-		len += sprintf(p + len, "level:\t\t%d\n", level & 0xf);
-		len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6));
-		len += sprintf(p + len, "commands:\tup, down, mute\n");
-		len += sprintf(p + len, "commands:\tlevel <level>"
-			       " (<level> is 0-15)\n");
-	}
-
-	return len;
-}
-
-#define VOLUME_DOWN	0
-#define VOLUME_UP	1
-#define VOLUME_MUTE	2
-
-static int volume_write(char *buf)
-{
-	int cmos_cmd, inc, i;
-	u8 level, mute;
-	int new_level, new_mute;
-	char *cmd;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (!acpi_ec_read(volume_offset, &level))
-			return -EIO;
-		new_mute = mute = level & 0x40;
-		new_level = level = level & 0xf;
-
-		if (strlencmp(cmd, "up") == 0) {
-			if (mute)
-				new_mute = 0;
-			else
-				new_level = level == 15 ? 15 : level + 1;
-		} else if (strlencmp(cmd, "down") == 0) {
-			if (mute)
-				new_mute = 0;
-			else
-				new_level = level == 0 ? 0 : level - 1;
-		} else if (sscanf(cmd, "level %d", &new_level) == 1 &&
-			   new_level >= 0 && new_level <= 15) {
-			/* new_level set */
-		} else if (strlencmp(cmd, "mute") == 0) {
-			new_mute = 0x40;
-		} else
-			return -EINVAL;
-
-		if (new_level != level) {	/* mute doesn't change */
-			cmos_cmd = new_level > level ? VOLUME_UP : VOLUME_DOWN;
-			inc = new_level > level ? 1 : -1;
-
-			if (mute && (!cmos_eval(cmos_cmd) ||
-				     !acpi_ec_write(volume_offset, level)))
-				return -EIO;
-
-			for (i = level; i != new_level; i += inc)
-				if (!cmos_eval(cmos_cmd) ||
-				    !acpi_ec_write(volume_offset, i + inc))
-					return -EIO;
-
-			if (mute && (!cmos_eval(VOLUME_MUTE) ||
-				     !acpi_ec_write(volume_offset,
-						    new_level + mute)))
-				return -EIO;
-		}
-
-		if (new_mute != mute) {	/* level doesn't change */
-			cmos_cmd = new_mute ? VOLUME_MUTE : VOLUME_UP;
-
-			if (!cmos_eval(cmos_cmd) ||
-			    !acpi_ec_write(volume_offset, level + new_mute))
-				return -EIO;
-		}
-	}
-
-	return 0;
-}
-
-static enum fan_status_access_mode fan_status_access_mode;
-static enum fan_control_access_mode fan_control_access_mode;
-static enum fan_control_commands fan_control_commands;
-
-static int fan_control_status_known;
-static u8 fan_control_initial_status;
-
-static void fan_watchdog_fire(struct work_struct *ignored);
-static int fan_watchdog_maxinterval;
-static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire);
-
-static int fan_init(void)
-{
-	fan_status_access_mode = IBMACPI_FAN_NONE;
-	fan_control_access_mode = IBMACPI_FAN_WR_NONE;
-	fan_control_commands = 0;
-	fan_control_status_known = 1;
-	fan_watchdog_maxinterval = 0;
-
-	if (gfan_handle) {
-		/* 570, 600e/x, 770e, 770x */
-		fan_status_access_mode = IBMACPI_FAN_RD_ACPI_GFAN;
-	} else {
-		/* all other ThinkPads: note that even old-style
-		 * ThinkPad ECs supports the fan control register */
-		if (likely(acpi_ec_read(fan_status_offset,
-					&fan_control_initial_status))) {
-			fan_status_access_mode = IBMACPI_FAN_RD_TPEC;
-
-			/* In some ThinkPads, neither the EC nor the ACPI
-			 * DSDT initialize the fan status, and it ends up
-			 * being set to 0x07 when it *could* be either
-			 * 0x07 or 0x80.
-			 *
-			 * Enable for TP-1Y (T43), TP-78 (R51e),
-			 * TP-76 (R52), TP-70 (T43, R52), which are known
-			 * to be buggy. */
-			if (fan_control_initial_status == 0x07 &&
-			    ibm_thinkpad_ec_found &&
-			    ((ibm_thinkpad_ec_found[0] == '1' &&
-			      ibm_thinkpad_ec_found[1] == 'Y') ||
-			     (ibm_thinkpad_ec_found[0] == '7' &&
-			      (ibm_thinkpad_ec_found[1] == '6' ||
-			       ibm_thinkpad_ec_found[1] == '8' ||
-			       ibm_thinkpad_ec_found[1] == '0'))
-			    )) {
-				printk(IBM_NOTICE
-				       "fan_init: initial fan status is "
-				       "unknown, assuming it is in auto "
-				       "mode\n");
-				fan_control_status_known = 0;
-			}
-		} else {
-			printk(IBM_ERR
-			       "ThinkPad ACPI EC access misbehaving, "
-			       "fan status and control unavailable\n");
-			return 0;
-		}
-	}
-
-	if (sfan_handle) {
-		/* 570, 770x-JL */
-		fan_control_access_mode = IBMACPI_FAN_WR_ACPI_SFAN;
-		fan_control_commands |=
-		    IBMACPI_FAN_CMD_LEVEL | IBMACPI_FAN_CMD_ENABLE;
-	} else {
-		if (!gfan_handle) {
-			/* gfan without sfan means no fan control */
-			/* all other models implement TP EC 0x2f control */
-
-			if (fans_handle) {
-				/* X31, X40, X41 */
-				fan_control_access_mode =
-				    IBMACPI_FAN_WR_ACPI_FANS;
-				fan_control_commands |=
-				    IBMACPI_FAN_CMD_SPEED |
-				    IBMACPI_FAN_CMD_LEVEL |
-				    IBMACPI_FAN_CMD_ENABLE;
-			} else {
-				fan_control_access_mode = IBMACPI_FAN_WR_TPEC;
-				fan_control_commands |=
-				    IBMACPI_FAN_CMD_LEVEL |
-				    IBMACPI_FAN_CMD_ENABLE;
-			}
-		}
-	}
-
-	return 0;
-}
-
-static int fan_get_status(u8 *status)
-{
-	u8 s;
-
-	/* TODO:
-	 * Add IBMACPI_FAN_RD_ACPI_FANS ? */
-
-	switch (fan_status_access_mode) {
-	case IBMACPI_FAN_RD_ACPI_GFAN:
-		/* 570, 600e/x, 770e, 770x */
-
-		if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
-			return -EIO;
-
-		if (likely(status))
-			*status = s & 0x07;
-
-		break;
-
-	case IBMACPI_FAN_RD_TPEC:
-		/* all except 570, 600e/x, 770e, 770x */
-		if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
-			return -EIO;
-
-		if (likely(status))
-			*status = s;
-
-		break;
-
-	default:
-		return -ENXIO;
-	}
-
-	return 0;
-}
-
-static int fan_get_speed(unsigned int *speed)
-{
-	u8 hi, lo;
-
-	switch (fan_status_access_mode) {
-	case IBMACPI_FAN_RD_TPEC:
-		/* all except 570, 600e/x, 770e, 770x */
-		if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
-			     !acpi_ec_read(fan_rpm_offset + 1, &hi)))
-			return -EIO;
-
-		if (likely(speed))
-			*speed = (hi << 8) | lo;
-
-		break;
-
-	default:
-		return -ENXIO;
-	}
-
-	return 0;
-}
-
-static void fan_exit(void)
-{
-	cancel_delayed_work(&fan_watchdog_task);
-	flush_scheduled_work();
-}
-
-static void fan_watchdog_reset(void)
-{
-	static int fan_watchdog_active = 0;
-
-	if (fan_watchdog_active)
-		cancel_delayed_work(&fan_watchdog_task);
-
-	if (fan_watchdog_maxinterval > 0) {
-		fan_watchdog_active = 1;
-		if (!schedule_delayed_work(&fan_watchdog_task,
-				msecs_to_jiffies(fan_watchdog_maxinterval
-						 * 1000))) {
-			printk(IBM_ERR "failed to schedule the fan watchdog, "
-			       "watchdog will not trigger\n");
-		}
-	} else
-		fan_watchdog_active = 0;
-}
-
-static int fan_read(char *p)
-{
-	int len = 0;
-	int rc;
-	u8 status;
-	unsigned int speed = 0;
-
-	switch (fan_status_access_mode) {
-	case IBMACPI_FAN_RD_ACPI_GFAN:
-		/* 570, 600e/x, 770e, 770x */
-		if ((rc = fan_get_status(&status)) < 0)
-			return rc;
-
-		len += sprintf(p + len, "status:\t\t%s\n"
-			       "level:\t\t%d\n",
-			       (status != 0) ? "enabled" : "disabled", status);
-		break;
-
-	case IBMACPI_FAN_RD_TPEC:
-		/* all except 570, 600e/x, 770e, 770x */
-		if ((rc = fan_get_status(&status)) < 0)
-			return rc;
-
-		if (unlikely(!fan_control_status_known)) {
-			if (status != fan_control_initial_status)
-				fan_control_status_known = 1;
-			else
-				/* Return most likely status. In fact, it
-				 * might be the only possible status */
-				status = IBMACPI_FAN_EC_AUTO;
-		}
-
-		len += sprintf(p + len, "status:\t\t%s\n",
-			       (status != 0) ? "enabled" : "disabled");
-
-		/* No ThinkPad boots on disengaged mode, we can safely
-		 * assume the tachometer is online if fan control status
-		 * was unknown */
-		if ((rc = fan_get_speed(&speed)) < 0)
-			return rc;
-
-		len += sprintf(p + len, "speed:\t\t%d\n", speed);
-
-		if (status & IBMACPI_FAN_EC_DISENGAGED)
-			/* Disengaged mode takes precedence */
-			len += sprintf(p + len, "level:\t\tdisengaged\n");
-		else if (status & IBMACPI_FAN_EC_AUTO)
-			len += sprintf(p + len, "level:\t\tauto\n");
-		else
-			len += sprintf(p + len, "level:\t\t%d\n", status);
-		break;
-
-	case IBMACPI_FAN_NONE:
-	default:
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	}
-
-	if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) {
-		len += sprintf(p + len, "commands:\tlevel <level>");
-
-		switch (fan_control_access_mode) {
-		case IBMACPI_FAN_WR_ACPI_SFAN:
-			len += sprintf(p + len, " (<level> is 0-7)\n");
-			break;
-
-		default:
-			len += sprintf(p + len, " (<level> is 0-7, "
-				       "auto, disengaged)\n");
-			break;
-		}
-	}
-
-	if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE)
-		len += sprintf(p + len, "commands:\tenable, disable\n"
-			       "commands:\twatchdog <timeout> (<timeout> is 0 (off), "
-			       "1-120 (seconds))\n");
-
-	if (fan_control_commands & IBMACPI_FAN_CMD_SPEED)
-		len += sprintf(p + len, "commands:\tspeed <speed>"
-			       " (<speed> is 0-65535)\n");
-
-	return len;
-}
-
-static int fan_set_level(int level)
-{
-	switch (fan_control_access_mode) {
-	case IBMACPI_FAN_WR_ACPI_SFAN:
-		if (level >= 0 && level <= 7) {
-			if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
-				return -EIO;
-		} else
-			return -EINVAL;
-		break;
-
-	case IBMACPI_FAN_WR_ACPI_FANS:
-	case IBMACPI_FAN_WR_TPEC:
-		if ((level != IBMACPI_FAN_EC_AUTO) &&
-		    (level != IBMACPI_FAN_EC_DISENGAGED) &&
-		    ((level < 0) || (level > 7)))
-			return -EINVAL;
-
-		if (!acpi_ec_write(fan_status_offset, level))
-			return -EIO;
-		else
-			fan_control_status_known = 1;
-		break;
-
-	default:
-		return -ENXIO;
-	}
-	return 0;
-}
-
-static int fan_set_enable(void)
-{
-	u8 s;
-	int rc;
-
-	switch (fan_control_access_mode) {
-	case IBMACPI_FAN_WR_ACPI_FANS:
-	case IBMACPI_FAN_WR_TPEC:
-		if ((rc = fan_get_status(&s)) < 0)
-			return rc;
-
-		/* Don't go out of emergency fan mode */
-		if (s != 7)
-			s = IBMACPI_FAN_EC_AUTO;
-
-		if (!acpi_ec_write(fan_status_offset, s))
-			return -EIO;
-		else
-			fan_control_status_known = 1;
-		break;
-
-	case IBMACPI_FAN_WR_ACPI_SFAN:
-		if ((rc = fan_get_status(&s)) < 0)
-			return rc;
-
-		s &= 0x07;
-
-		/* Set fan to at least level 4 */
-		if (s < 4)
-			s = 4;
-
-		if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s))
-			return -EIO;
-		break;
-
-	default:
-		return -ENXIO;
-	}
-	return 0;
-}
-
-static int fan_set_disable(void)
-{
-	switch (fan_control_access_mode) {
-	case IBMACPI_FAN_WR_ACPI_FANS:
-	case IBMACPI_FAN_WR_TPEC:
-		if (!acpi_ec_write(fan_status_offset, 0x00))
-			return -EIO;
-		else
-			fan_control_status_known = 1;
-		break;
-
-	case IBMACPI_FAN_WR_ACPI_SFAN:
-		if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00))
-			return -EIO;
-		break;
-
-	default:
-		return -ENXIO;
-	}
-	return 0;
-}
-
-static int fan_set_speed(int speed)
-{
-	switch (fan_control_access_mode) {
-	case IBMACPI_FAN_WR_ACPI_FANS:
-		if (speed >= 0 && speed <= 65535) {
-			if (!acpi_evalf(fans_handle, NULL, NULL, "vddd",
-					speed, speed, speed))
-				return -EIO;
-		} else
-			return -EINVAL;
-		break;
-
-	default:
-		return -ENXIO;
-	}
-	return 0;
-}
-
-static int fan_write_cmd_level(const char *cmd, int *rc)
-{
-	int level;
-
-	if (strlencmp(cmd, "level auto") == 0)
-		level = IBMACPI_FAN_EC_AUTO;
-	else if (strlencmp(cmd, "level disengaged") == 0)
-		level = IBMACPI_FAN_EC_DISENGAGED;
-	else if (sscanf(cmd, "level %d", &level) != 1)
-		return 0;
-
-	if ((*rc = fan_set_level(level)) == -ENXIO)
-		printk(IBM_ERR "level command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
-
-	return 1;
-}
-
-static int fan_write_cmd_enable(const char *cmd, int *rc)
-{
-	if (strlencmp(cmd, "enable") != 0)
-		return 0;
-
-	if ((*rc = fan_set_enable()) == -ENXIO)
-		printk(IBM_ERR "enable command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
-
-	return 1;
-}
-
-static int fan_write_cmd_disable(const char *cmd, int *rc)
-{
-	if (strlencmp(cmd, "disable") != 0)
-		return 0;
-
-	if ((*rc = fan_set_disable()) == -ENXIO)
-		printk(IBM_ERR "disable command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
-
-	return 1;
-}
-
-static int fan_write_cmd_speed(const char *cmd, int *rc)
-{
-	int speed;
-
-	/* TODO:
-	 * Support speed <low> <medium> <high> ? */
-
-	if (sscanf(cmd, "speed %d", &speed) != 1)
-		return 0;
-
-	if ((*rc = fan_set_speed(speed)) == -ENXIO)
-		printk(IBM_ERR "speed command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
-
-	return 1;
-}
-
-static int fan_write_cmd_watchdog(const char *cmd, int *rc)
-{
-	int interval;
-
-	if (sscanf(cmd, "watchdog %d", &interval) != 1)
-		return 0;
-
-	if (interval < 0 || interval > 120)
-		*rc = -EINVAL;
-	else
-		fan_watchdog_maxinterval = interval;
-
-	return 1;
-}
-
-static int fan_write(char *buf)
-{
-	char *cmd;
-	int rc = 0;
-
-	while (!rc && (cmd = next_cmd(&buf))) {
-		if (!((fan_control_commands & IBMACPI_FAN_CMD_LEVEL) &&
-		      fan_write_cmd_level(cmd, &rc)) &&
-		    !((fan_control_commands & IBMACPI_FAN_CMD_ENABLE) &&
-		      (fan_write_cmd_enable(cmd, &rc) ||
-		       fan_write_cmd_disable(cmd, &rc) ||
-		       fan_write_cmd_watchdog(cmd, &rc))) &&
-		    !((fan_control_commands & IBMACPI_FAN_CMD_SPEED) &&
-		      fan_write_cmd_speed(cmd, &rc))
-		    )
-			rc = -EINVAL;
-		else if (!rc)
-			fan_watchdog_reset();
-	}
-
-	return rc;
-}
-
-static void fan_watchdog_fire(struct work_struct *ignored)
-{
-	printk(IBM_NOTICE "fan watchdog: enabling fan\n");
-	if (fan_set_enable()) {
-		printk(IBM_ERR "fan watchdog: error while enabling fan\n");
-		/* reschedule for later */
-		fan_watchdog_reset();
-	}
-}
-
-static struct ibm_struct ibms[] = {
-	{
-	 .name = "driver",
-	 .init = ibm_acpi_driver_init,
-	 .read = driver_read,
-	 },
-	{
-	 .name = "hotkey",
-	 .hid = IBM_HKEY_HID,
-	 .init = hotkey_init,
-	 .read = hotkey_read,
-	 .write = hotkey_write,
-	 .exit = hotkey_exit,
-	 .notify = hotkey_notify,
-	 .handle = &hkey_handle,
-	 .type = ACPI_DEVICE_NOTIFY,
-	 },
-	{
-	 .name = "bluetooth",
-	 .init = bluetooth_init,
-	 .read = bluetooth_read,
-	 .write = bluetooth_write,
-	 },
-	{
-	 .name = "wan",
-	 .init = wan_init,
-	 .read = wan_read,
-	 .write = wan_write,
-	 .experimental = 1,
-	 },
-	{
-	 .name = "video",
-	 .init = video_init,
-	 .read = video_read,
-	 .write = video_write,
-	 .exit = video_exit,
-	 },
-	{
-	 .name = "light",
-	 .init = light_init,
-	 .read = light_read,
-	 .write = light_write,
-	 },
-#ifdef CONFIG_ACPI_IBM_DOCK
-	{
-	 .name = "dock",
-	 .read = dock_read,
-	 .write = dock_write,
-	 .notify = dock_notify,
-	 .handle = &dock_handle,
-	 .type = ACPI_SYSTEM_NOTIFY,
-	 },
-	{
-	 .name = "dock",
-	 .hid = IBM_PCI_HID,
-	 .notify = dock_notify,
-	 .handle = &pci_handle,
-	 .type = ACPI_SYSTEM_NOTIFY,
-	 },
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-	{
-	 .name = "bay",
-	 .init = bay_init,
-	 .read = bay_read,
-	 .write = bay_write,
-	 .notify = bay_notify,
-	 .handle = &bay_handle,
-	 .type = ACPI_SYSTEM_NOTIFY,
-	 },
-#endif /* CONFIG_ACPI_IBM_BAY */
-	{
-	 .name = "cmos",
-	 .read = cmos_read,
-	 .write = cmos_write,
-	 },
-	{
-	 .name = "led",
-	 .init = led_init,
-	 .read = led_read,
-	 .write = led_write,
-	 },
-	{
-	 .name = "beep",
-	 .read = beep_read,
-	 .write = beep_write,
-	 },
-	{
-	 .name = "thermal",
-	 .init = thermal_init,
-	 .read = thermal_read,
-	 },
-	{
-	 .name = "ecdump",
-	 .read = ecdump_read,
-	 .write = ecdump_write,
-	 .experimental = 1,
-	 },
-	{
-	 .name = "brightness",
-	 .read = brightness_read,
-	 .write = brightness_write,
-	 .init = brightness_init,
-	 .exit = brightness_exit,
-	 },
-	{
-	 .name = "volume",
-	 .read = volume_read,
-	 .write = volume_write,
-	 },
-	{
-	 .name = "fan",
-	 .read = fan_read,
-	 .write = fan_write,
-	 .init = fan_init,
-	 .exit = fan_exit,
-	 .experimental = 1,
-	 },
-};
-
-static int dispatch_read(char *page, char **start, off_t off, int count,
-			 int *eof, void *data)
-{
-	struct ibm_struct *ibm = data;
-	int len;
-
-	if (!ibm || !ibm->read)
-		return -EINVAL;
-
-	len = ibm->read(page);
-	if (len < 0)
-		return len;
-
-	if (len <= off + count)
-		*eof = 1;
-	*start = page + off;
-	len -= off;
-	if (len > count)
-		len = count;
-	if (len < 0)
-		len = 0;
-
-	return len;
-}
-
-static int dispatch_write(struct file *file, const char __user * userbuf,
-			  unsigned long count, void *data)
-{
-	struct ibm_struct *ibm = data;
-	char *kernbuf;
-	int ret;
-
-	if (!ibm || !ibm->write)
-		return -EINVAL;
-
-	kernbuf = kmalloc(count + 2, GFP_KERNEL);
-	if (!kernbuf)
-		return -ENOMEM;
-
-	if (copy_from_user(kernbuf, userbuf, count)) {
-		kfree(kernbuf);
-		return -EFAULT;
-	}
-
-	kernbuf[count] = 0;
-	strcat(kernbuf, ",");
-	ret = ibm->write(kernbuf);
-	if (ret == 0)
-		ret = count;
-
-	kfree(kernbuf);
-
-	return ret;
-}
-
-static void dispatch_notify(acpi_handle handle, u32 event, void *data)
-{
-	struct ibm_struct *ibm = data;
-
-	if (!ibm || !ibm->notify)
-		return;
-
-	ibm->notify(ibm, event);
-}
-
-static int __init setup_notify(struct ibm_struct *ibm)
-{
-	acpi_status status;
-	int ret;
-
-	if (!*ibm->handle)
-		return 0;
-
-	ret = acpi_bus_get_device(*ibm->handle, &ibm->device);
-	if (ret < 0) {
-		printk(IBM_ERR "%s device not present\n", ibm->name);
-		return -ENODEV;
-	}
-
-	acpi_driver_data(ibm->device) = ibm;
-	sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name);
-
-	status = acpi_install_notify_handler(*ibm->handle, ibm->type,
-					     dispatch_notify, ibm);
-	if (ACPI_FAILURE(status)) {
-		if (status == AE_ALREADY_EXISTS) {
-			printk(IBM_NOTICE "another device driver is already handling %s events\n",
-				ibm->name);
-		} else {
-			printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n",
-				ibm->name, status);
-		}
-		return -ENODEV;
-	}
-	ibm->notify_installed = 1;
-	return 0;
-}
-
-static int __init ibm_device_add(struct acpi_device *device)
-{
-	return 0;
-}
-
-static int __init register_driver(struct ibm_struct *ibm)
-{
-	int ret;
-
-	ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
-	if (!ibm->driver) {
-		printk(IBM_ERR "kmalloc(ibm->driver) failed\n");
-		return -1;
-	}
-
-	sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name);
-	ibm->driver->ids = ibm->hid;
-	ibm->driver->ops.add = &ibm_device_add;
-
-	ret = acpi_bus_register_driver(ibm->driver);
-	if (ret < 0) {
-		printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n",
-		       ibm->hid, ret);
-		kfree(ibm->driver);
-	}
-
-	return ret;
-}
-
-static void ibm_exit(struct ibm_struct *ibm);
-
-static int __init ibm_init(struct ibm_struct *ibm)
-{
-	int ret;
-	struct proc_dir_entry *entry;
-
-	if (ibm->experimental && !experimental)
-		return 0;
-
-	if (ibm->hid) {
-		ret = register_driver(ibm);
-		if (ret < 0)
-			return ret;
-		ibm->driver_registered = 1;
-	}
-
-	if (ibm->init) {
-		ret = ibm->init();
-		if (ret != 0)
-			return ret;
-		ibm->init_called = 1;
-	}
-
-	if (ibm->read) {
-		entry = create_proc_entry(ibm->name,
-					  S_IFREG | S_IRUGO | S_IWUSR,
-					  proc_dir);
-		if (!entry) {
-			printk(IBM_ERR "unable to create proc entry %s\n",
-			       ibm->name);
-			return -ENODEV;
-		}
-		entry->owner = THIS_MODULE;
-		entry->data = ibm;
-		entry->read_proc = &dispatch_read;
-		if (ibm->write)
-			entry->write_proc = &dispatch_write;
-		ibm->proc_created = 1;
-	}
-
-	if (ibm->notify) {
-		ret = setup_notify(ibm);
-		if (ret == -ENODEV) {
-			printk(IBM_NOTICE "disabling subdriver %s\n",
-				ibm->name);
-			ibm_exit(ibm);
-			return 0;
-		}
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static void ibm_exit(struct ibm_struct *ibm)
-{
-	if (ibm->notify_installed)
-		acpi_remove_notify_handler(*ibm->handle, ibm->type,
-					   dispatch_notify);
-
-	if (ibm->proc_created)
-		remove_proc_entry(ibm->name, proc_dir);
-
-	if (ibm->init_called && ibm->exit)
-		ibm->exit();
-
-	if (ibm->driver_registered) {
-		acpi_bus_unregister_driver(ibm->driver);
-		kfree(ibm->driver);
-	}
-}
-
-static void __init ibm_handle_init(char *name,
-				   acpi_handle * handle, acpi_handle parent,
-				   char **paths, int num_paths, char **path)
-{
-	int i;
-	acpi_status status;
-
-	for (i = 0; i < num_paths; i++) {
-		status = acpi_get_handle(parent, paths[i], handle);
-		if (ACPI_SUCCESS(status)) {
-			*path = paths[i];
-			return;
-		}
-	}
-
-	*handle = NULL;
-}
-
-#define IBM_HANDLE_INIT(object)						\
-	ibm_handle_init(#object, &object##_handle, *object##_parent,	\
-		object##_paths, ARRAY_SIZE(object##_paths), &object##_path)
-
-static int __init set_ibm_param(const char *val, struct kernel_param *kp)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(ibms); i++)
-		if (strcmp(ibms[i].name, kp->name) == 0 && ibms[i].write) {
-			if (strlen(val) > sizeof(ibms[i].param) - 2)
-				return -ENOSPC;
-			strcpy(ibms[i].param, val);
-			strcat(ibms[i].param, ",");
-			return 0;
-		}
-
-	return -EINVAL;
-}
-
-#define IBM_PARAM(feature) \
-	module_param_call(feature, set_ibm_param, NULL, NULL, 0)
-
-IBM_PARAM(hotkey);
-IBM_PARAM(bluetooth);
-IBM_PARAM(video);
-IBM_PARAM(light);
-#ifdef CONFIG_ACPI_IBM_DOCK
-IBM_PARAM(dock);
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-IBM_PARAM(bay);
-#endif /* CONFIG_ACPI_IBM_BAY */
-IBM_PARAM(cmos);
-IBM_PARAM(led);
-IBM_PARAM(beep);
-IBM_PARAM(ecdump);
-IBM_PARAM(brightness);
-IBM_PARAM(volume);
-IBM_PARAM(fan);
-
-static void acpi_ibm_exit(void)
-{
-	int i;
-
-	for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--)
-		ibm_exit(&ibms[i]);
-
-	if (proc_dir)
-		remove_proc_entry(IBM_DIR, acpi_root_dir);
-
-	if (ibm_thinkpad_ec_found)
-		kfree(ibm_thinkpad_ec_found);
-}
-
-static char* __init check_dmi_for_ec(void)
-{
-	struct dmi_device *dev = NULL;
-	char ec_fw_string[18];
-
-	/*
-	 * ThinkPad T23 or newer, A31 or newer, R50e or newer,
-	 * X32 or newer, all Z series;  Some models must have an
-	 * up-to-date BIOS or they will not be detected.
-	 *
-	 * See http://thinkwiki.org/wiki/List_of_DMI_IDs
-	 */
-	while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) {
-		if (sscanf(dev->name,
-			   "IBM ThinkPad Embedded Controller -[%17c",
-			   ec_fw_string) == 1) {
-			ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
-			ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
-			return kstrdup(ec_fw_string, GFP_KERNEL);
-		}
-	}
-	return NULL;
-}
-
-static int __init acpi_ibm_init(void)
-{
-	int ret, i;
-
-	if (acpi_disabled)
-		return -ENODEV;
-
-	/* ec is required because many other handles are relative to it */
-	IBM_HANDLE_INIT(ec);
-	if (!ec_handle) {
-		printk(IBM_ERR "ec object not found\n");
-		return -ENODEV;
-	}
-
-	/* Models with newer firmware report the EC in DMI */
-	ibm_thinkpad_ec_found = check_dmi_for_ec();
-
-	/* these handles are not required */
-	IBM_HANDLE_INIT(vid);
-	IBM_HANDLE_INIT(vid2);
-	IBM_HANDLE_INIT(ledb);
-	IBM_HANDLE_INIT(led);
-	IBM_HANDLE_INIT(hkey);
-	IBM_HANDLE_INIT(lght);
-	IBM_HANDLE_INIT(cmos);
-#ifdef CONFIG_ACPI_IBM_DOCK
-	IBM_HANDLE_INIT(dock);
-#endif
-	IBM_HANDLE_INIT(pci);
-#ifdef CONFIG_ACPI_IBM_BAY
-	IBM_HANDLE_INIT(bay);
-	if (bay_handle)
-		IBM_HANDLE_INIT(bay_ej);
-	IBM_HANDLE_INIT(bay2);
-	if (bay2_handle)
-		IBM_HANDLE_INIT(bay2_ej);
-#endif /* CONFIG_ACPI_IBM_BAY */
-	IBM_HANDLE_INIT(beep);
-	IBM_HANDLE_INIT(ecrd);
-	IBM_HANDLE_INIT(ecwr);
-	IBM_HANDLE_INIT(fans);
-	IBM_HANDLE_INIT(gfan);
-	IBM_HANDLE_INIT(sfan);
-
-	proc_dir = proc_mkdir(IBM_DIR, acpi_root_dir);
-	if (!proc_dir) {
-		printk(IBM_ERR "unable to create proc dir %s", IBM_DIR);
-		acpi_ibm_exit();
-		return -ENODEV;
-	}
-	proc_dir->owner = THIS_MODULE;
-
-	for (i = 0; i < ARRAY_SIZE(ibms); i++) {
-		ret = ibm_init(&ibms[i]);
-		if (ret >= 0 && *ibms[i].param)
-			ret = ibms[i].write(ibms[i].param);
-		if (ret < 0) {
-			acpi_ibm_exit();
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-module_init(acpi_ibm_init);
-module_exit(acpi_ibm_exit);
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 75dbc58..a3c525b 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -127,4 +127,55 @@ config SONY_LAPTOP_OLD
 	  ---help---
 	  Build the sonypi driver compatibility code into the sony-laptop driver.
 
+config THINKPAD_ACPI
+	tristate "ThinkPad ACPI Laptop Extras"
+	depends on X86 && ACPI
+	select BACKLIGHT_CLASS_DEVICE
+	select HWMON
+	---help---
+	  This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
+	  support for Fn-Fx key combinations, Bluetooth control, video
+	  output switching, ThinkLight control, UltraBay eject and more.
+	  For more information about this driver see 
+	  <file:Documentation/thinkpad-acpi.txt> and <http://ibm-acpi.sf.net/> .
+
+	  This driver was formely known as ibm-acpi.
+
+	  If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
+
+config THINKPAD_ACPI_DEBUG
+	bool "Verbose debug mode"
+	depends on THINKPAD_ACPI
+	default n
+	---help---
+	  Enables extra debugging information, at the expense of a slightly
+	  increase in driver size.
+
+	  If you are not sure, say N here.
+
+config THINKPAD_ACPI_DOCK
+	bool "Legacy Docking Station Support"
+	depends on THINKPAD_ACPI
+	depends on ACPI_DOCK=n
+	default n
+	---help---
+	  Allows the thinkpad_acpi driver to handle docking station events.
+	  This support was made obsolete by the generic ACPI docking station
+	  support (CONFIG_ACPI_DOCK).  It will allow locking and removing the
+	  laptop from the docking station, but will not properly connect PCI
+	  devices.
+
+	  If you are not sure, say N here.
+
+config THINKPAD_ACPI_BAY
+	bool "Legacy Removable Bay Support"
+	depends on THINKPAD_ACPI
+	default y
+	---help---
+	  Allows the thinkpad_acpi driver to handle removable bays.  It will
+	  eletrically disable the device in the bay, and also generate
+	  notifications when the bay lever is ejected or inserted.
+
+	  If you are not sure, say Y here.
+
 endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7793ccd..e325164 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
 obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
 obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
 obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
+obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
new file mode 100644
index 0000000..6c36a55
--- /dev/null
+++ b/drivers/misc/thinkpad_acpi.c
@@ -0,0 +1,4312 @@
+/*
+ *  thinkpad_acpi.c - ThinkPad ACPI Extras
+ *
+ *
+ *  Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
+ *  Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#define IBM_VERSION "0.14"
+#define TPACPI_SYSFS_VERSION 0x000100
+
+/*
+ *  Changelog:
+ *  2007-03-27  0.14	renamed to thinkpad_acpi and moved to
+ *  			drivers/misc.
+ *
+ *  2006-11-22	0.13	new maintainer
+ *  			changelog now lives in git commit history, and will
+ *  			not be updated further in-file.
+ *
+ *  2005-08-17  0.12	fix compilation on 2.6.13-rc kernels
+ *  2005-03-17	0.11	support for 600e, 770x
+ *			    thanks to Jamie Lentin <lentinj@dial.pipex.com>
+ *			support for 770e, G41
+ *			G40 and G41 don't have a thinklight
+ *			temperatures no longer experimental
+ *			experimental brightness control
+ *			experimental volume control
+ *			experimental fan enable/disable
+ *  2005-01-16	0.10	fix module loading on R30, R31
+ *  2005-01-16	0.9	support for 570, R30, R31
+ *			ultrabay support on A22p, A3x
+ *			limit arg for cmos, led, beep, drop experimental status
+ *			more capable led control on A21e, A22p, T20-22, X20
+ *			experimental temperatures and fan speed
+ *			experimental embedded controller register dump
+ *			mark more functions as __init, drop incorrect __exit
+ *			use MODULE_VERSION
+ *			    thanks to Henrik Brix Andersen <brix@gentoo.org>
+ *			fix parameter passing on module loading
+ *			    thanks to Rusty Russell <rusty@rustcorp.com.au>
+ *			    thanks to Jim Radford <radford@blackbean.org>
+ *  2004-11-08	0.8	fix init error case, don't return from a macro
+ *			    thanks to Chris Wright <chrisw@osdl.org>
+ *  2004-10-23	0.7	fix module loading on A21e, A22p, T20, T21, X20
+ *			fix led control on A21e
+ *  2004-10-19	0.6	use acpi_bus_register_driver() to claim HKEY device
+ *  2004-10-18	0.5	thinklight support on A21e, G40, R32, T20, T21, X20
+ *			proc file format changed
+ *			video_switch command
+ *			experimental cmos control
+ *			experimental led control
+ *			experimental acpi sounds
+ *  2004-09-16	0.4	support for module parameters
+ *			hotkey mask can be prefixed by 0x
+ *			video output switching
+ *			video expansion control
+ *			ultrabay eject support
+ *			removed lcd brightness/on/off control, didn't work
+ *  2004-08-17	0.3	support for R40
+ *			lcd off, brightness control
+ *			thinklight on/off
+ *  2004-08-14	0.2	support for T series, X20
+ *			bluetooth enable/disable
+ *			hotkey events disabled by default
+ *			removed fan control, currently useless
+ *  2004-08-09	0.1	initial release, support for X series
+ */
+
+#include "thinkpad_acpi.h"
+
+MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
+MODULE_DESCRIPTION(IBM_DESC);
+MODULE_VERSION(IBM_VERSION);
+MODULE_LICENSE("GPL");
+
+/* Please remove this in year 2009 */
+MODULE_ALIAS("ibm_acpi");
+
+#define __unused __attribute__ ((unused))
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * ACPI Helpers and device model
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+/*************************************************************************
+ * ACPI basic handles
+ */
+
+static acpi_handle root_handle = NULL;
+
+#define IBM_HANDLE(object, parent, paths...)			\
+	static acpi_handle  object##_handle;			\
+	static acpi_handle *object##_parent = &parent##_handle;	\
+	static char        *object##_path;			\
+	static char        *object##_paths[] = { paths }
+
+IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0",	/* 240, 240x */
+	   "\\_SB.PCI.ISA.EC",	/* 570 */
+	   "\\_SB.PCI0.ISA0.EC0",	/* 600e/x, 770e, 770x */
+	   "\\_SB.PCI0.ISA.EC",	/* A21e, A2xm/p, T20-22, X20-21 */
+	   "\\_SB.PCI0.AD4S.EC0",	/* i1400, R30 */
+	   "\\_SB.PCI0.ICH3.EC0",	/* R31 */
+	   "\\_SB.PCI0.LPC.EC",	/* all others */
+	   );
+
+IBM_HANDLE(ecrd, ec, "ECRD");	/* 570 */
+IBM_HANDLE(ecwr, ec, "ECWR");	/* 570 */
+
+
+/*************************************************************************
+ * Misc ACPI handles
+ */
+
+IBM_HANDLE(cmos, root, "\\UCMS",	/* R50, R50e, R50p, R51, T4x, X31, X40 */
+	   "\\CMOS",		/* A3x, G4x, R32, T23, T30, X22-24, X30 */
+	   "\\CMS",		/* R40, R40e */
+	   );			/* all others */
+
+IBM_HANDLE(hkey, ec, "\\_SB.HKEY",	/* 600e/x, 770e, 770x */
+	   "^HKEY",		/* R30, R31 */
+	   "HKEY",		/* all others */
+	   );			/* 570 */
+
+
+/*************************************************************************
+ * ACPI helpers
+ */
+
+static int acpi_evalf(acpi_handle handle,
+		      void *res, char *method, char *fmt, ...)
+{
+	char *fmt0 = fmt;
+	struct acpi_object_list params;
+	union acpi_object in_objs[IBM_MAX_ACPI_ARGS];
+	struct acpi_buffer result, *resultp;
+	union acpi_object out_obj;
+	acpi_status status;
+	va_list ap;
+	char res_type;
+	int success;
+	int quiet;
+
+	if (!*fmt) {
+		printk(IBM_ERR "acpi_evalf() called with empty format\n");
+		return 0;
+	}
+
+	if (*fmt == 'q') {
+		quiet = 1;
+		fmt++;
+	} else
+		quiet = 0;
+
+	res_type = *(fmt++);
+
+	params.count = 0;
+	params.pointer = &in_objs[0];
+
+	va_start(ap, fmt);
+	while (*fmt) {
+		char c = *(fmt++);
+		switch (c) {
+		case 'd':	/* int */
+			in_objs[params.count].integer.value = va_arg(ap, int);
+			in_objs[params.count++].type = ACPI_TYPE_INTEGER;
+			break;
+			/* add more types as needed */
+		default:
+			printk(IBM_ERR "acpi_evalf() called "
+			       "with invalid format character '%c'\n", c);
+			return 0;
+		}
+	}
+	va_end(ap);
+
+	if (res_type != 'v') {
+		result.length = sizeof(out_obj);
+		result.pointer = &out_obj;
+		resultp = &result;
+	} else
+		resultp = NULL;
+
+	status = acpi_evaluate_object(handle, method, &params, resultp);
+
+	switch (res_type) {
+	case 'd':		/* int */
+		if (res)
+			*(int *)res = out_obj.integer.value;
+		success = status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER;
+		break;
+	case 'v':		/* void */
+		success = status == AE_OK;
+		break;
+		/* add more types as needed */
+	default:
+		printk(IBM_ERR "acpi_evalf() called "
+		       "with invalid format character '%c'\n", res_type);
+		return 0;
+	}
+
+	if (!success && !quiet)
+		printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n",
+		       method, fmt0, status);
+
+	return success;
+}
+
+static void __unused acpi_print_int(acpi_handle handle, char *method)
+{
+	int i;
+
+	if (acpi_evalf(handle, &i, method, "d"))
+		printk(IBM_INFO "%s = 0x%x\n", method, i);
+	else
+		printk(IBM_ERR "error calling %s\n", method);
+}
+
+static int acpi_ec_read(int i, u8 * p)
+{
+	int v;
+
+	if (ecrd_handle) {
+		if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i))
+			return 0;
+		*p = v;
+	} else {
+		if (ec_read(i, p) < 0)
+			return 0;
+	}
+
+	return 1;
+}
+
+static int acpi_ec_write(int i, u8 v)
+{
+	if (ecwr_handle) {
+		if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v))
+			return 0;
+	} else {
+		if (ec_write(i, v) < 0)
+			return 0;
+	}
+
+	return 1;
+}
+
+static int _sta(acpi_handle handle)
+{
+	int status;
+
+	if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
+		status = 0;
+
+	return status;
+}
+
+static int issue_thinkpad_cmos_command(int cmos_cmd)
+{
+	if (!cmos_handle)
+		return -ENXIO;
+
+	if (!acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd))
+		return -EIO;
+
+	return 0;
+}
+
+/*************************************************************************
+ * ACPI device model
+ */
+
+static void drv_acpi_handle_init(char *name,
+			   acpi_handle *handle, acpi_handle parent,
+			   char **paths, int num_paths, char **path)
+{
+	int i;
+	acpi_status status;
+
+	vdbg_printk(TPACPI_DBG_INIT, "trying to locate ACPI handle for %s\n",
+		name);
+
+	for (i = 0; i < num_paths; i++) {
+		status = acpi_get_handle(parent, paths[i], handle);
+		if (ACPI_SUCCESS(status)) {
+			*path = paths[i];
+			dbg_printk(TPACPI_DBG_INIT,
+				   "Found ACPI handle %s for %s\n",
+				   *path, name);
+			return;
+		}
+	}
+
+	vdbg_printk(TPACPI_DBG_INIT, "ACPI handle for %s not found\n",
+		    name);
+	*handle = NULL;
+}
+
+static void dispatch_acpi_notify(acpi_handle handle, u32 event, void *data)
+{
+	struct ibm_struct *ibm = data;
+
+	if (!ibm || !ibm->acpi || !ibm->acpi->notify)
+		return;
+
+	ibm->acpi->notify(ibm, event);
+}
+
+static int __init setup_acpi_notify(struct ibm_struct *ibm)
+{
+	acpi_status status;
+	int rc;
+
+	BUG_ON(!ibm->acpi);
+
+	if (!*ibm->acpi->handle)
+		return 0;
+
+	vdbg_printk(TPACPI_DBG_INIT,
+		"setting up ACPI notify for %s\n", ibm->name);
+
+	rc = acpi_bus_get_device(*ibm->acpi->handle, &ibm->acpi->device);
+	if (rc < 0) {
+		printk(IBM_ERR "acpi_bus_get_device(%s) failed: %d\n",
+			ibm->name, rc);
+		return -ENODEV;
+	}
+
+	acpi_driver_data(ibm->acpi->device) = ibm;
+	sprintf(acpi_device_class(ibm->acpi->device), "%s/%s",
+		IBM_ACPI_EVENT_PREFIX,
+		ibm->name);
+
+	status = acpi_install_notify_handler(*ibm->acpi->handle,
+			ibm->acpi->type, dispatch_acpi_notify, ibm);
+	if (ACPI_FAILURE(status)) {
+		if (status == AE_ALREADY_EXISTS) {
+			printk(IBM_NOTICE "another device driver is already handling %s events\n",
+				ibm->name);
+		} else {
+			printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n",
+				ibm->name, status);
+		}
+		return -ENODEV;
+	}
+	ibm->flags.acpi_notify_installed = 1;
+	return 0;
+}
+
+static int __init tpacpi_device_add(struct acpi_device *device)
+{
+	return 0;
+}
+
+static int __init register_tpacpi_subdriver(struct ibm_struct *ibm)
+{
+	int rc;
+
+	dbg_printk(TPACPI_DBG_INIT,
+		"registering %s as an ACPI driver\n", ibm->name);
+
+	BUG_ON(!ibm->acpi);
+
+	ibm->acpi->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
+	if (!ibm->acpi->driver) {
+		printk(IBM_ERR "kzalloc(ibm->driver) failed\n");
+		return -ENOMEM;
+	}
+
+	sprintf(ibm->acpi->driver->name, "%s_%s", IBM_NAME, ibm->name);
+	ibm->acpi->driver->ids = ibm->acpi->hid;
+	ibm->acpi->driver->ops.add = &tpacpi_device_add;
+
+	rc = acpi_bus_register_driver(ibm->acpi->driver);
+	if (rc < 0) {
+		printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n",
+		       ibm->acpi->hid, rc);
+		kfree(ibm->acpi->driver);
+		ibm->acpi->driver = NULL;
+	} else if (!rc)
+		ibm->flags.acpi_driver_registered = 1;
+
+	return rc;
+}
+
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Procfs Helpers
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+static int dispatch_procfs_read(char *page, char **start, off_t off,
+			int count, int *eof, void *data)
+{
+	struct ibm_struct *ibm = data;
+	int len;
+
+	if (!ibm || !ibm->read)
+		return -EINVAL;
+
+	len = ibm->read(page);
+	if (len < 0)
+		return len;
+
+	if (len <= off + count)
+		*eof = 1;
+	*start = page + off;
+	len -= off;
+	if (len > count)
+		len = count;
+	if (len < 0)
+		len = 0;
+
+	return len;
+}
+
+static int dispatch_procfs_write(struct file *file,
+			const char __user * userbuf,
+			unsigned long count, void *data)
+{
+	struct ibm_struct *ibm = data;
+	char *kernbuf;
+	int ret;
+
+	if (!ibm || !ibm->write)
+		return -EINVAL;
+
+	kernbuf = kmalloc(count + 2, GFP_KERNEL);
+	if (!kernbuf)
+		return -ENOMEM;
+
+	if (copy_from_user(kernbuf, userbuf, count)) {
+		kfree(kernbuf);
+		return -EFAULT;
+	}
+
+	kernbuf[count] = 0;
+	strcat(kernbuf, ",");
+	ret = ibm->write(kernbuf);
+	if (ret == 0)
+		ret = count;
+
+	kfree(kernbuf);
+
+	return ret;
+}
+
+static char *next_cmd(char **cmds)
+{
+	char *start = *cmds;
+	char *end;
+
+	while ((end = strchr(start, ',')) && end == start)
+		start = end + 1;
+
+	if (!end)
+		return NULL;
+
+	*end = 0;
+	*cmds = end + 1;
+	return start;
+}
+
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Device model: hwmon and platform
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+static struct platform_device *tpacpi_pdev = NULL;
+static struct class_device *tpacpi_hwmon = NULL;
+
+static struct platform_driver tpacpi_pdriver = {
+	.driver = {
+		.name = IBM_DRVR_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+
+/*************************************************************************
+ * thinkpad-acpi driver attributes
+ */
+
+/* interface_version --------------------------------------------------- */
+static ssize_t tpacpi_driver_interface_version_show(
+				struct device_driver *drv,
+				char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "0x%08x\n", TPACPI_SYSFS_VERSION);
+}
+
+static DRIVER_ATTR(interface_version, S_IRUGO,
+		tpacpi_driver_interface_version_show, NULL);
+
+/* debug_level --------------------------------------------------------- */
+static ssize_t tpacpi_driver_debug_show(struct device_driver *drv,
+						char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n", dbg_level);
+}
+
+static ssize_t tpacpi_driver_debug_store(struct device_driver *drv,
+						const char *buf, size_t count)
+{
+	unsigned long t;
+
+	if (parse_strtoul(buf, 0xffff, &t))
+		return -EINVAL;
+
+	dbg_level = t;
+
+	return count;
+}
+
+static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO,
+		tpacpi_driver_debug_show, tpacpi_driver_debug_store);
+
+/* version ------------------------------------------------------------- */
+static ssize_t tpacpi_driver_version_show(struct device_driver *drv,
+						char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s v%s\n", IBM_DESC, IBM_VERSION);
+}
+
+static DRIVER_ATTR(version, S_IRUGO,
+		tpacpi_driver_version_show, NULL);
+
+/* --------------------------------------------------------------------- */
+
+static struct driver_attribute* tpacpi_driver_attributes[] = {
+	&driver_attr_debug_level, &driver_attr_version,
+	&driver_attr_interface_version,
+};
+
+static int __init tpacpi_create_driver_attributes(struct device_driver *drv)
+{
+	int i, res;
+
+	i = 0;
+	res = 0;
+	while (!res && i < ARRAY_SIZE(tpacpi_driver_attributes)) {
+		res = driver_create_file(drv, tpacpi_driver_attributes[i]);
+		i++;
+	}
+
+	return res;
+}
+
+static void tpacpi_remove_driver_attributes(struct device_driver *drv)
+{
+	int i;
+
+	for(i = 0; i < ARRAY_SIZE(tpacpi_driver_attributes); i++)
+		driver_remove_file(drv, tpacpi_driver_attributes[i]);
+}
+
+/*************************************************************************
+ * sysfs support helpers
+ */
+
+struct attribute_set_obj {
+	struct attribute_set s;
+	struct attribute *a;
+} __attribute__((packed));
+
+static struct attribute_set *create_attr_set(unsigned int max_members,
+						const char* name)
+{
+	struct attribute_set_obj *sobj;
+
+	if (max_members == 0)
+		return NULL;
+
+	/* Allocates space for implicit NULL at the end too */
+	sobj = kzalloc(sizeof(struct attribute_set_obj) +
+		    max_members * sizeof(struct attribute *),
+		    GFP_KERNEL);
+	if (!sobj)
+		return NULL;
+	sobj->s.max_members = max_members;
+	sobj->s.group.attrs = &sobj->a;
+	sobj->s.group.name = name;
+
+	return &sobj->s;
+}
+
+/* not multi-threaded safe, use it in a single thread per set */
+static int add_to_attr_set(struct attribute_set* s, struct attribute *attr)
+{
+	if (!s || !attr)
+		return -EINVAL;
+
+	if (s->members >= s->max_members)
+		return -ENOMEM;
+
+	s->group.attrs[s->members] = attr;
+	s->members++;
+
+	return 0;
+}
+
+static int add_many_to_attr_set(struct attribute_set* s,
+			struct attribute **attr,
+			unsigned int count)
+{
+	int i, res;
+
+	for (i = 0; i < count; i++) {
+		res = add_to_attr_set(s, attr[i]);
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
+
+static void delete_attr_set(struct attribute_set* s, struct kobject *kobj)
+{
+	sysfs_remove_group(kobj, &s->group);
+	destroy_attr_set(s);
+}
+
+static int parse_strtoul(const char *buf,
+		unsigned long max, unsigned long *value)
+{
+	char *endp;
+
+	*value = simple_strtoul(buf, &endp, 0);
+	while (*endp && isspace(*endp))
+		endp++;
+	if (*endp || *value > max)
+		return -EINVAL;
+
+	return 0;
+}
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Subdrivers
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+/*************************************************************************
+ * thinkpad-acpi init subdriver
+ */
+
+static int __init thinkpad_acpi_driver_init(struct ibm_init_struct *iibm)
+{
+	printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
+	printk(IBM_INFO "%s\n", IBM_URL);
+
+	if (ibm_thinkpad_ec_found)
+		printk(IBM_INFO "ThinkPad EC firmware %s\n",
+		       ibm_thinkpad_ec_found);
+
+	return 0;
+}
+
+static int thinkpad_acpi_driver_read(char *p)
+{
+	int len = 0;
+
+	len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC);
+	len += sprintf(p + len, "version:\t%s\n", IBM_VERSION);
+
+	return len;
+}
+
+static struct ibm_struct thinkpad_acpi_driver_data = {
+	.name = "driver",
+	.read = thinkpad_acpi_driver_read,
+};
+
+/*************************************************************************
+ * Hotkey subdriver
+ */
+
+static int hotkey_orig_status;
+static int hotkey_orig_mask;
+
+static struct attribute_set *hotkey_dev_attributes = NULL;
+
+/* sysfs hotkey enable ------------------------------------------------- */
+static ssize_t hotkey_enable_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	int res, status, mask;
+
+	res = hotkey_get(&status, &mask);
+	if (res)
+		return res;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", status);
+}
+
+static ssize_t hotkey_enable_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	unsigned long t;
+	int res, status, mask;
+
+	if (parse_strtoul(buf, 1, &t))
+		return -EINVAL;
+
+	res = hotkey_get(&status, &mask);
+	if (!res)
+		res = hotkey_set(t, mask);
+
+	return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_hotkey_enable =
+	__ATTR(enable, S_IWUSR | S_IRUGO,
+		hotkey_enable_show, hotkey_enable_store);
+
+/* sysfs hotkey mask --------------------------------------------------- */
+static ssize_t hotkey_mask_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	int res, status, mask;
+
+	res = hotkey_get(&status, &mask);
+	if (res)
+		return res;
+
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n", mask);
+}
+
+static ssize_t hotkey_mask_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	unsigned long t;
+	int res, status, mask;
+
+	if (parse_strtoul(buf, 0xffff, &t))
+		return -EINVAL;
+
+	res = hotkey_get(&status, &mask);
+	if (!res)
+		hotkey_set(status, t);
+
+	return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_hotkey_mask =
+	__ATTR(mask, S_IWUSR | S_IRUGO,
+		hotkey_mask_show, hotkey_mask_store);
+
+/* sysfs hotkey bios_enabled ------------------------------------------- */
+static ssize_t hotkey_bios_enabled_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", hotkey_orig_status);
+}
+
+static struct device_attribute dev_attr_hotkey_bios_enabled =
+	__ATTR(bios_enabled, S_IRUGO, hotkey_bios_enabled_show, NULL);
+
+/* sysfs hotkey bios_mask ---------------------------------------------- */
+static ssize_t hotkey_bios_mask_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n", hotkey_orig_mask);
+}
+
+static struct device_attribute dev_attr_hotkey_bios_mask =
+	__ATTR(bios_mask, S_IRUGO, hotkey_bios_mask_show, NULL);
+
+/* --------------------------------------------------------------------- */
+
+static struct attribute *hotkey_mask_attributes[] = {
+	&dev_attr_hotkey_mask.attr,
+	&dev_attr_hotkey_bios_enabled.attr,
+	&dev_attr_hotkey_bios_mask.attr,
+};
+
+static int __init hotkey_init(struct ibm_init_struct *iibm)
+{
+	int res;
+
+	vdbg_printk(TPACPI_DBG_INIT, "initializing hotkey subdriver\n");
+
+	IBM_ACPIHANDLE_INIT(hkey);
+	mutex_init(&hotkey_mutex);
+
+	/* hotkey not supported on 570 */
+	tp_features.hotkey = hkey_handle != NULL;
+
+	vdbg_printk(TPACPI_DBG_INIT, "hotkeys are %s\n",
+		str_supported(tp_features.hotkey));
+
+	if (tp_features.hotkey) {
+		hotkey_dev_attributes = create_attr_set(4,
+						TPACPI_HOTKEY_SYSFS_GROUP);
+		if (!hotkey_dev_attributes)
+			return -ENOMEM;
+		res = add_to_attr_set(hotkey_dev_attributes,
+				&dev_attr_hotkey_enable.attr);
+		if (res)
+			return res;
+
+		/* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+		   A30, R30, R31, T20-22, X20-21, X22-24 */
+		tp_features.hotkey_mask =
+			acpi_evalf(hkey_handle, NULL, "DHKN", "qv");
+
+		vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
+			str_supported(tp_features.hotkey_mask));
+
+		res = hotkey_get(&hotkey_orig_status, &hotkey_orig_mask);
+		if (!res && tp_features.hotkey_mask) {
+			res = add_many_to_attr_set(hotkey_dev_attributes,
+				hotkey_mask_attributes,
+				ARRAY_SIZE(hotkey_mask_attributes));
+		}
+		if (!res)
+			res = register_attr_set_with_sysfs(
+					hotkey_dev_attributes,
+					&tpacpi_pdev->dev.kobj);
+
+		if (res)
+			return res;
+	}
+
+	return (tp_features.hotkey)? 0 : 1;
+}
+
+static void hotkey_exit(void)
+{
+	int res;
+
+	if (tp_features.hotkey) {
+		dbg_printk(TPACPI_DBG_EXIT, "restoring original hotkey mask\n");
+		res = hotkey_set(hotkey_orig_status, hotkey_orig_mask);
+		if (res)
+			printk(IBM_ERR "failed to restore hotkey to BIOS defaults\n");
+	}
+
+	if (hotkey_dev_attributes) {
+		delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
+		hotkey_dev_attributes = NULL;
+	}
+}
+
+static void hotkey_notify(struct ibm_struct *ibm, u32 event)
+{
+	int hkey;
+
+	if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d"))
+		acpi_bus_generate_event(ibm->acpi->device, event, hkey);
+	else {
+		printk(IBM_ERR "unknown hotkey event %d\n", event);
+		acpi_bus_generate_event(ibm->acpi->device, event, 0);
+	}
+}
+
+/*
+ * Call with hotkey_mutex held
+ */
+static int hotkey_get(int *status, int *mask)
+{
+	if (!acpi_evalf(hkey_handle, status, "DHKC", "d"))
+		return -EIO;
+
+	if (tp_features.hotkey_mask)
+		if (!acpi_evalf(hkey_handle, mask, "DHKN", "d"))
+			return -EIO;
+
+	return 0;
+}
+
+/*
+ * Call with hotkey_mutex held
+ */
+static int hotkey_set(int status, int mask)
+{
+	int i;
+
+	if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status))
+		return -EIO;
+
+	if (tp_features.hotkey_mask)
+		for (i = 0; i < 32; i++) {
+			int bit = ((1 << i) & mask) != 0;
+			if (!acpi_evalf(hkey_handle,
+					NULL, "MHKM", "vdd", i + 1, bit))
+				return -EIO;
+		}
+
+	return 0;
+}
+
+/* procfs -------------------------------------------------------------- */
+static int hotkey_read(char *p)
+{
+	int res, status, mask;
+	int len = 0;
+
+	if (!tp_features.hotkey) {
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+		return len;
+	}
+
+	res = mutex_lock_interruptible(&hotkey_mutex);
+	if (res < 0)
+		return res;
+	res = hotkey_get(&status, &mask);
+	mutex_unlock(&hotkey_mutex);
+	if (res)
+		return res;
+
+	len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
+	if (tp_features.hotkey_mask) {
+		len += sprintf(p + len, "mask:\t\t0x%04x\n", mask);
+		len += sprintf(p + len,
+			       "commands:\tenable, disable, reset, <mask>\n");
+	} else {
+		len += sprintf(p + len, "mask:\t\tnot supported\n");
+		len += sprintf(p + len, "commands:\tenable, disable, reset\n");
+	}
+
+	return len;
+}
+
+static int hotkey_write(char *buf)
+{
+	int res, status, mask;
+	char *cmd;
+	int do_cmd = 0;
+
+	if (!tp_features.hotkey)
+		return -ENODEV;
+
+	res = mutex_lock_interruptible(&hotkey_mutex);
+	if (res < 0)
+		return res;
+
+	res = hotkey_get(&status, &mask);
+	if (res)
+		goto errexit;
+
+	res = 0;
+	while ((cmd = next_cmd(&buf))) {
+		if (strlencmp(cmd, "enable") == 0) {
+			status = 1;
+		} else if (strlencmp(cmd, "disable") == 0) {
+			status = 0;
+		} else if (strlencmp(cmd, "reset") == 0) {
+			status = hotkey_orig_status;
+			mask = hotkey_orig_mask;
+		} else if (sscanf(cmd, "0x%x", &mask) == 1) {
+			/* mask set */
+		} else if (sscanf(cmd, "%x", &mask) == 1) {
+			/* mask set */
+		} else {
+			res = -EINVAL;
+			goto errexit;
+		}
+		do_cmd = 1;
+	}
+
+	if (do_cmd)
+		res = hotkey_set(status, mask);
+
+errexit:
+	mutex_unlock(&hotkey_mutex);
+	return res;
+}
+
+static struct tp_acpi_drv_struct ibm_hotkey_acpidriver = {
+	.hid = IBM_HKEY_HID,
+	.notify = hotkey_notify,
+	.handle = &hkey_handle,
+	.type = ACPI_DEVICE_NOTIFY,
+};
+
+static struct ibm_struct hotkey_driver_data = {
+	.name = "hotkey",
+	.read = hotkey_read,
+	.write = hotkey_write,
+	.exit = hotkey_exit,
+	.acpi = &ibm_hotkey_acpidriver,
+};
+
+/*************************************************************************
+ * Bluetooth subdriver
+ */
+
+/* sysfs bluetooth enable ---------------------------------------------- */
+static ssize_t bluetooth_enable_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	int status;
+
+	status = bluetooth_get_radiosw();
+	if (status < 0)
+		return status;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", status ? 1 : 0);
+}
+
+static ssize_t bluetooth_enable_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	unsigned long t;
+	int res;
+
+	if (parse_strtoul(buf, 1, &t))
+		return -EINVAL;
+
+	res = bluetooth_set_radiosw(t);
+
+	return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_bluetooth_enable =
+	__ATTR(enable, S_IWUSR | S_IRUGO,
+		bluetooth_enable_show, bluetooth_enable_store);
+
+/* --------------------------------------------------------------------- */
+
+static struct attribute *bluetooth_attributes[] = {
+	&dev_attr_bluetooth_enable.attr,
+	NULL
+};
+
+static const struct attribute_group bluetooth_attr_group = {
+	.name = TPACPI_BLUETH_SYSFS_GROUP,
+	.attrs = bluetooth_attributes,
+};
+
+static int __init bluetooth_init(struct ibm_init_struct *iibm)
+{
+	int res;
+	int status = 0;
+
+	vdbg_printk(TPACPI_DBG_INIT, "initializing bluetooth subdriver\n");
+
+	IBM_ACPIHANDLE_INIT(hkey);
+
+	/* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+	   G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
+	tp_features.bluetooth = hkey_handle &&
+	    acpi_evalf(hkey_handle, &status, "GBDC", "qd");
+
+	vdbg_printk(TPACPI_DBG_INIT, "bluetooth is %s, status 0x%02x\n",
+		str_supported(tp_features.bluetooth),
+		status);
+
+	if (tp_features.bluetooth) {
+		if (!(status & TP_ACPI_BLUETOOTH_HWPRESENT)) {
+			/* no bluetooth hardware present in system */
+			tp_features.bluetooth = 0;
+			dbg_printk(TPACPI_DBG_INIT,
+				   "bluetooth hardware not installed\n");
+		} else {
+			res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+					&bluetooth_attr_group);
+			if (res)
+				return res;
+		}
+	}
+
+	return (tp_features.bluetooth)? 0 : 1;
+}
+
+static void bluetooth_exit(void)
+{
+	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+			&bluetooth_attr_group);
+}
+
+static int bluetooth_get_radiosw(void)
+{
+	int status;
+
+	if (!tp_features.bluetooth)
+		return -ENODEV;
+
+	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
+		return -EIO;
+
+	return ((status & TP_ACPI_BLUETOOTH_RADIOSSW) != 0);
+}
+
+static int bluetooth_set_radiosw(int radio_on)
+{
+	int status;
+
+	if (!tp_features.bluetooth)
+		return -ENODEV;
+
+	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
+		return -EIO;
+	if (radio_on)
+		status |= TP_ACPI_BLUETOOTH_RADIOSSW;
+	else
+		status &= ~TP_ACPI_BLUETOOTH_RADIOSSW;
+	if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
+		return -EIO;
+
+	return 0;
+}
+
+/* procfs -------------------------------------------------------------- */
+static int bluetooth_read(char *p)
+{
+	int len = 0;
+	int status = bluetooth_get_radiosw();
+
+	if (!tp_features.bluetooth)
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+	else {
+		len += sprintf(p + len, "status:\t\t%s\n",
+				(status)? "enabled" : "disabled");
+		len += sprintf(p + len, "commands:\tenable, disable\n");
+	}
+
+	return len;
+}
+
+static int bluetooth_write(char *buf)
+{
+	char *cmd;
+
+	if (!tp_features.bluetooth)
+		return -ENODEV;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (strlencmp(cmd, "enable") == 0) {
+			bluetooth_set_radiosw(1);
+		} else if (strlencmp(cmd, "disable") == 0) {
+			bluetooth_set_radiosw(0);
+		} else
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct ibm_struct bluetooth_driver_data = {
+	.name = "bluetooth",
+	.read = bluetooth_read,
+	.write = bluetooth_write,
+	.exit = bluetooth_exit,
+};
+
+/*************************************************************************
+ * Wan subdriver
+ */
+
+/* sysfs wan enable ---------------------------------------------------- */
+static ssize_t wan_enable_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	int status;
+
+	status = wan_get_radiosw();
+	if (status < 0)
+		return status;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", status ? 1 : 0);
+}
+
+static ssize_t wan_enable_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	unsigned long t;
+	int res;
+
+	if (parse_strtoul(buf, 1, &t))
+		return -EINVAL;
+
+	res = wan_set_radiosw(t);
+
+	return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_wan_enable =
+	__ATTR(enable, S_IWUSR | S_IRUGO,
+		wan_enable_show, wan_enable_store);
+
+/* --------------------------------------------------------------------- */
+
+static struct attribute *wan_attributes[] = {
+	&dev_attr_wan_enable.attr,
+	NULL
+};
+
+static const struct attribute_group wan_attr_group = {
+	.name = TPACPI_WAN_SYSFS_GROUP,
+	.attrs = wan_attributes,
+};
+
+static int __init wan_init(struct ibm_init_struct *iibm)
+{
+	int res;
+	int status = 0;
+
+	vdbg_printk(TPACPI_DBG_INIT, "initializing wan subdriver\n");
+
+	IBM_ACPIHANDLE_INIT(hkey);
+
+	tp_features.wan = hkey_handle &&
+	    acpi_evalf(hkey_handle, &status, "GWAN", "qd");
+
+	vdbg_printk(TPACPI_DBG_INIT, "wan is %s, status 0x%02x\n",
+		str_supported(tp_features.wan),
+		status);
+
+	if (tp_features.wan) {
+		if (!(status & TP_ACPI_WANCARD_HWPRESENT)) {
+			/* no wan hardware present in system */
+			tp_features.wan = 0;
+			dbg_printk(TPACPI_DBG_INIT,
+				   "wan hardware not installed\n");
+		} else {
+			res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+					&wan_attr_group);
+			if (res)
+				return res;
+		}
+	}
+
+	return (tp_features.wan)? 0 : 1;
+}
+
+static void wan_exit(void)
+{
+	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+		&wan_attr_group);
+}
+
+static int wan_get_radiosw(void)
+{
+	int status;
+
+	if (!tp_features.wan)
+		return -ENODEV;
+
+	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
+		return -EIO;
+
+	return ((status & TP_ACPI_WANCARD_RADIOSSW) != 0);
+}
+
+static int wan_set_radiosw(int radio_on)
+{
+	int status;
+
+	if (!tp_features.wan)
+		return -ENODEV;
+
+	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
+		return -EIO;
+	if (radio_on)
+		status |= TP_ACPI_WANCARD_RADIOSSW;
+	else
+		status &= ~TP_ACPI_WANCARD_RADIOSSW;
+	if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
+		return -EIO;
+
+	return 0;
+}
+
+/* procfs -------------------------------------------------------------- */
+static int wan_read(char *p)
+{
+	int len = 0;
+	int status = wan_get_radiosw();
+
+	if (!tp_features.wan)
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+	else {
+		len += sprintf(p + len, "status:\t\t%s\n",
+				(status)? "enabled" : "disabled");
+		len += sprintf(p + len, "commands:\tenable, disable\n");
+	}
+
+	return len;
+}
+
+static int wan_write(char *buf)
+{
+	char *cmd;
+
+	if (!tp_features.wan)
+		return -ENODEV;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (strlencmp(cmd, "enable") == 0) {
+			wan_set_radiosw(1);
+		} else if (strlencmp(cmd, "disable") == 0) {
+			wan_set_radiosw(0);
+		} else
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct ibm_struct wan_driver_data = {
+	.name = "wan",
+	.read = wan_read,
+	.write = wan_write,
+	.exit = wan_exit,
+	.flags.experimental = 1,
+};
+
+/*************************************************************************
+ * Video subdriver
+ */
+
+static enum video_access_mode video_supported;
+static int video_orig_autosw;
+
+IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA",	/* 570 */
+	   "\\_SB.PCI0.AGP0.VID0",	/* 600e/x, 770x */
+	   "\\_SB.PCI0.VID0",	/* 770e */
+	   "\\_SB.PCI0.VID",	/* A21e, G4x, R50e, X30, X40 */
+	   "\\_SB.PCI0.AGP.VID",	/* all others */
+	   );				/* R30, R31 */
+
+IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID");	/* G41 */
+
+static int __init video_init(struct ibm_init_struct *iibm)
+{
+	int ivga;
+
+	vdbg_printk(TPACPI_DBG_INIT, "initializing video subdriver\n");
+
+	IBM_ACPIHANDLE_INIT(vid);
+	IBM_ACPIHANDLE_INIT(vid2);
+
+	if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga)
+		/* G41, assume IVGA doesn't change */
+		vid_handle = vid2_handle;
+
+	if (!vid_handle)
+		/* video switching not supported on R30, R31 */
+		video_supported = TPACPI_VIDEO_NONE;
+	else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd"))
+		/* 570 */
+		video_supported = TPACPI_VIDEO_570;
+	else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd"))
+		/* 600e/x, 770e, 770x */
+		video_supported = TPACPI_VIDEO_770;
+	else
+		/* all others */
+		video_supported = TPACPI_VIDEO_NEW;
+
+	vdbg_printk(TPACPI_DBG_INIT, "video is %s, mode %d\n",
+		str_supported(video_supported != TPACPI_VIDEO_NONE),
+		video_supported);
+
+	return (video_supported != TPACPI_VIDEO_NONE)? 0 : 1;
+}
+
+static void video_exit(void)
+{
+	dbg_printk(TPACPI_DBG_EXIT,
+		   "restoring original video autoswitch mode\n");
+	if (video_autosw_set(video_orig_autosw))
+		printk(IBM_ERR "error while trying to restore original "
+			"video autoswitch mode\n");
+}
+
+static int video_outputsw_get(void)
+{
+	int status = 0;
+	int i;
+
+	switch (video_supported) {
+	case TPACPI_VIDEO_570:
+		if (!acpi_evalf(NULL, &i, "\\_SB.PHS", "dd",
+				 TP_ACPI_VIDEO_570_PHSCMD))
+			return -EIO;
+		status = i & TP_ACPI_VIDEO_570_PHSMASK;
+		break;
+	case TPACPI_VIDEO_770:
+		if (!acpi_evalf(NULL, &i, "\\VCDL", "d"))
+			return -EIO;
+		if (i)
+			status |= TP_ACPI_VIDEO_S_LCD;
+		if (!acpi_evalf(NULL, &i, "\\VCDC", "d"))
+			return -EIO;
+		if (i)
+			status |= TP_ACPI_VIDEO_S_CRT;
+		break;
+	case TPACPI_VIDEO_NEW:
+		if (!acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1) ||
+		    !acpi_evalf(NULL, &i, "\\VCDC", "d"))
+			return -EIO;
+		if (i)
+			status |= TP_ACPI_VIDEO_S_CRT;
+
+		if (!acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0) ||
+		    !acpi_evalf(NULL, &i, "\\VCDL", "d"))
+			return -EIO;
+		if (i)
+			status |= TP_ACPI_VIDEO_S_LCD;
+		if (!acpi_evalf(NULL, &i, "\\VCDD", "d"))
+			return -EIO;
+		if (i)
+			status |= TP_ACPI_VIDEO_S_DVI;
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	return status;
+}
+
+static int video_outputsw_set(int status)
+{
+	int autosw;
+	int res = 0;
+
+	switch (video_supported) {
+	case TPACPI_VIDEO_570:
+		res = acpi_evalf(NULL, NULL,
+				 "\\_SB.PHS2", "vdd",
+				 TP_ACPI_VIDEO_570_PHS2CMD,
+				 status | TP_ACPI_VIDEO_570_PHS2SET);
+		break;
+	case TPACPI_VIDEO_770:
+		autosw = video_autosw_get();
+		if (autosw < 0)
+			return autosw;
+
+		res = video_autosw_set(1);
+		if (res)
+			return res;
+		res = acpi_evalf(vid_handle, NULL,
+				 "ASWT", "vdd", status * 0x100, 0);
+		if (!autosw && video_autosw_set(autosw)) {
+			printk(IBM_ERR "video auto-switch left enabled due to error\n");
+			return -EIO;
+		}
+		break;
+	case TPACPI_VIDEO_NEW:
+		res = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) &&
+			acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1);
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	return (res)? 0 : -EIO;
+}
+
+static int video_autosw_get(void)
+{
+	int autosw = 0;
+
+	switch (video_supported) {
+	case TPACPI_VIDEO_570:
+		if (!acpi_evalf(vid_handle, &autosw, "SWIT", "d"))
+			return -EIO;
+		break;
+	case TPACPI_VIDEO_770:
+	case TPACPI_VIDEO_NEW:
+		if (!acpi_evalf(vid_handle, &autosw, "^VDEE", "d"))
+			return -EIO;
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	return autosw & 1;
+}
+
+static int video_autosw_set(int enable)
+{
+	if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", (enable)? 1 : 0))
+		return -EIO;
+	return 0;
+}
+
+static int video_outputsw_cycle(void)
+{
+	int autosw = video_autosw_get();
+	int res;
+
+	if (autosw < 0)
+		return autosw;
+
+	switch (video_supported) {
+	case TPACPI_VIDEO_570:
+		res = video_autosw_set(1);
+		if (res)
+			return res;
+		res = acpi_evalf(ec_handle, NULL, "_Q16", "v");
+		break;
+	case TPACPI_VIDEO_770:
+	case TPACPI_VIDEO_NEW:
+		res = video_autosw_set(1);
+		if (res)
+			return res;
+		res = acpi_evalf(vid_handle, NULL, "VSWT", "v");
+		break;
+	default:
+		return -ENOSYS;
+	}
+	if (!autosw && video_autosw_set(autosw)) {
+		printk(IBM_ERR "video auto-switch left enabled due to error\n");
+		return -EIO;
+	}
+
+	return (res)? 0 : -EIO;
+}
+
+static int video_expand_toggle(void)
+{
+	switch (video_supported) {
+	case TPACPI_VIDEO_570:
+		return acpi_evalf(ec_handle, NULL, "_Q17", "v")?
+			0 : -EIO;
+	case TPACPI_VIDEO_770:
+		return acpi_evalf(vid_handle, NULL, "VEXP", "v")?
+			0 : -EIO;
+	case TPACPI_VIDEO_NEW:
+		return acpi_evalf(NULL, NULL, "\\VEXP", "v")?
+			0 : -EIO;
+	default:
+		return -ENOSYS;
+	}
+	/* not reached */
+}
+
+static int video_read(char *p)
+{
+	int status, autosw;
+	int len = 0;
+
+	if (video_supported == TPACPI_VIDEO_NONE) {
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+		return len;
+	}
+
+	status = video_outputsw_get();
+	if (status < 0)
+		return status;
+
+	autosw = video_autosw_get();
+	if (autosw < 0)
+		return autosw;
+
+	len += sprintf(p + len, "status:\t\tsupported\n");
+	len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
+	len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
+	if (video_supported == TPACPI_VIDEO_NEW)
+		len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
+	len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
+	len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
+	len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
+	if (video_supported == TPACPI_VIDEO_NEW)
+		len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
+	len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
+	len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
+
+	return len;
+}
+
+static int video_write(char *buf)
+{
+	char *cmd;
+	int enable, disable, status;
+	int res;
+
+	if (video_supported == TPACPI_VIDEO_NONE)
+		return -ENODEV;
+
+	enable = 0;
+	disable = 0;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (strlencmp(cmd, "lcd_enable") == 0) {
+			enable |= TP_ACPI_VIDEO_S_LCD;
+		} else if (strlencmp(cmd, "lcd_disable") == 0) {
+			disable |= TP_ACPI_VIDEO_S_LCD;
+		} else if (strlencmp(cmd, "crt_enable") == 0) {
+			enable |= TP_ACPI_VIDEO_S_CRT;
+		} else if (strlencmp(cmd, "crt_disable") == 0) {
+			disable |= TP_ACPI_VIDEO_S_CRT;
+		} else if (video_supported == TPACPI_VIDEO_NEW &&
+			   strlencmp(cmd, "dvi_enable") == 0) {
+			enable |= TP_ACPI_VIDEO_S_DVI;
+		} else if (video_supported == TPACPI_VIDEO_NEW &&
+			   strlencmp(cmd, "dvi_disable") == 0) {
+			disable |= TP_ACPI_VIDEO_S_DVI;
+		} else if (strlencmp(cmd, "auto_enable") == 0) {
+			res = video_autosw_set(1);
+			if (res)
+				return res;
+		} else if (strlencmp(cmd, "auto_disable") == 0) {
+			res = video_autosw_set(0);
+			if (res)
+				return res;
+		} else if (strlencmp(cmd, "video_switch") == 0) {
+			res = video_outputsw_cycle();
+			if (res)
+				return res;
+		} else if (strlencmp(cmd, "expand_toggle") == 0) {
+			res = video_expand_toggle();
+			if (res)
+				return res;
+		} else
+			return -EINVAL;
+	}
+
+	if (enable || disable) {
+		status = video_outputsw_get();
+		if (status < 0)
+			return status;
+		res = video_outputsw_set((status & ~disable) | enable);
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
+
+static struct ibm_struct video_driver_data = {
+	.name = "video",
+	.read = video_read,
+	.write = video_write,
+	.exit = video_exit,
+};
+
+/*************************************************************************
+ * Light (thinklight) subdriver
+ */
+
+IBM_HANDLE(lght, root, "\\LGHT");	/* A21e, A2xm/p, T20-22, X20-21 */
+IBM_HANDLE(ledb, ec, "LEDB");		/* G4x */
+
+static int __init light_init(struct ibm_init_struct *iibm)
+{
+	vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n");
+
+	IBM_ACPIHANDLE_INIT(ledb);
+	IBM_ACPIHANDLE_INIT(lght);
+	IBM_ACPIHANDLE_INIT(cmos);
+
+	/* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */
+	tp_features.light = (cmos_handle || lght_handle) && !ledb_handle;
+
+	if (tp_features.light)
+		/* light status not supported on
+		   570, 600e/x, 770e, 770x, G4x, R30, R31, R32, X20 */
+		tp_features.light_status =
+			acpi_evalf(ec_handle, NULL, "KBLT", "qv");
+
+	vdbg_printk(TPACPI_DBG_INIT, "light is %s\n",
+		str_supported(tp_features.light));
+
+	return (tp_features.light)? 0 : 1;
+}
+
+static int light_read(char *p)
+{
+	int len = 0;
+	int status = 0;
+
+	if (!tp_features.light) {
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+	} else if (!tp_features.light_status) {
+		len += sprintf(p + len, "status:\t\tunknown\n");
+		len += sprintf(p + len, "commands:\ton, off\n");
+	} else {
+		if (!acpi_evalf(ec_handle, &status, "KBLT", "d"))
+			return -EIO;
+		len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0));
+		len += sprintf(p + len, "commands:\ton, off\n");
+	}
+
+	return len;
+}
+
+static int light_write(char *buf)
+{
+	int cmos_cmd, lght_cmd;
+	char *cmd;
+	int success;
+
+	if (!tp_features.light)
+		return -ENODEV;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (strlencmp(cmd, "on") == 0) {
+			cmos_cmd = 0x0c;
+			lght_cmd = 1;
+		} else if (strlencmp(cmd, "off") == 0) {
+			cmos_cmd = 0x0d;
+			lght_cmd = 0;
+		} else
+			return -EINVAL;
+
+		success = cmos_handle ?
+		    acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) :
+		    acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd);
+		if (!success)
+			return -EIO;
+	}
+
+	return 0;
+}
+
+static struct ibm_struct light_driver_data = {
+	.name = "light",
+	.read = light_read,
+	.write = light_write,
+};
+
+/*************************************************************************
+ * Dock subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+
+IBM_HANDLE(dock, root, "\\_SB.GDCK",	/* X30, X31, X40 */
+	   "\\_SB.PCI0.DOCK",	/* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
+	   "\\_SB.PCI0.PCI1.DOCK",	/* all others */
+	   "\\_SB.PCI.ISA.SLCE",	/* 570 */
+    );				/* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
+
+/* don't list other alternatives as we install a notify handler on the 570 */
+IBM_HANDLE(pci, root, "\\_SB.PCI");	/* 570 */
+
+static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
+	{
+	 .notify = dock_notify,
+	 .handle = &dock_handle,
+	 .type = ACPI_SYSTEM_NOTIFY,
+	},
+	{
+	 .hid = IBM_PCI_HID,
+	 .notify = dock_notify,
+	 .handle = &pci_handle,
+	 .type = ACPI_SYSTEM_NOTIFY,
+	},
+};
+
+static struct ibm_struct dock_driver_data[2] = {
+	{
+	 .name = "dock",
+	 .read = dock_read,
+	 .write = dock_write,
+	 .acpi = &ibm_dock_acpidriver[0],
+	},
+	{
+	 .name = "dock",
+	 .acpi = &ibm_dock_acpidriver[1],
+	},
+};
+
+#define dock_docked() (_sta(dock_handle) & 1)
+
+static int __init dock_init(struct ibm_init_struct *iibm)
+{
+	vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver\n");
+
+	IBM_ACPIHANDLE_INIT(dock);
+
+	vdbg_printk(TPACPI_DBG_INIT, "dock is %s\n",
+		str_supported(dock_handle != NULL));
+
+	return (dock_handle)? 0 : 1;
+}
+
+static int __init dock_init2(struct ibm_init_struct *iibm)
+{
+	int dock2_needed;
+
+	vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver part 2\n");
+
+	if (dock_driver_data[0].flags.acpi_driver_registered &&
+	    dock_driver_data[0].flags.acpi_notify_installed) {
+		IBM_ACPIHANDLE_INIT(pci);
+		dock2_needed = (pci_handle != NULL);
+		vdbg_printk(TPACPI_DBG_INIT,
+			    "dock PCI handler for the TP 570 is %s\n",
+			    str_supported(dock2_needed));
+	} else {
+		vdbg_printk(TPACPI_DBG_INIT,
+		"dock subdriver part 2 not required\n");
+		dock2_needed = 0;
+	}
+
+	return (dock2_needed)? 0 : 1;
+}
+
+static void dock_notify(struct ibm_struct *ibm, u32 event)
+{
+	int docked = dock_docked();
+	int pci = ibm->acpi->hid && strstr(ibm->acpi->hid, IBM_PCI_HID);
+
+	if (event == 1 && !pci)	/* 570 */
+		acpi_bus_generate_event(ibm->acpi->device, event, 1);	/* button */
+	else if (event == 1 && pci)	/* 570 */
+		acpi_bus_generate_event(ibm->acpi->device, event, 3);	/* dock */
+	else if (event == 3 && docked)
+		acpi_bus_generate_event(ibm->acpi->device, event, 1);	/* button */
+	else if (event == 3 && !docked)
+		acpi_bus_generate_event(ibm->acpi->device, event, 2);	/* undock */
+	else if (event == 0 && docked)
+		acpi_bus_generate_event(ibm->acpi->device, event, 3);	/* dock */
+	else {
+		printk(IBM_ERR "unknown dock event %d, status %d\n",
+		       event, _sta(dock_handle));
+		acpi_bus_generate_event(ibm->acpi->device, event, 0);	/* unknown */
+	}
+}
+
+static int dock_read(char *p)
+{
+	int len = 0;
+	int docked = dock_docked();
+
+	if (!dock_handle)
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+	else if (!docked)
+		len += sprintf(p + len, "status:\t\tundocked\n");
+	else {
+		len += sprintf(p + len, "status:\t\tdocked\n");
+		len += sprintf(p + len, "commands:\tdock, undock\n");
+	}
+
+	return len;
+}
+
+static int dock_write(char *buf)
+{
+	char *cmd;
+
+	if (!dock_docked())
+		return -ENODEV;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (strlencmp(cmd, "undock") == 0) {
+			if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
+			    !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
+				return -EIO;
+		} else if (strlencmp(cmd, "dock") == 0) {
+			if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
+				return -EIO;
+		} else
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_THINKPAD_ACPI_DOCK */
+
+/*************************************************************************
+ * Bay subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST",	/* 570 */
+	   "\\_SB.PCI0.IDE0.IDES.IDSM",	/* 600e/x, 770e, 770x */
+	   "\\_SB.PCI0.SATA.SCND.MSTR",	/* T60, X60, Z60 */
+	   "\\_SB.PCI0.IDE0.SCND.MSTR",	/* all others */
+	   );				/* A21e, R30, R31 */
+IBM_HANDLE(bay_ej, bay, "_EJ3",	/* 600e/x, A2xm/p, A3x */
+	   "_EJ0",		/* all others */
+	   );			/* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
+IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV",	/* A3x, R32 */
+	   "\\_SB.PCI0.IDE0.IDEP.IDPS",	/* 600e/x, 770e, 770x */
+	   );				/* all others */
+IBM_HANDLE(bay2_ej, bay2, "_EJ3",	/* 600e/x, 770e, A3x */
+	   "_EJ0",			/* 770x */
+	   );				/* all others */
+
+static int __init bay_init(struct ibm_init_struct *iibm)
+{
+	vdbg_printk(TPACPI_DBG_INIT, "initializing bay subdriver\n");
+
+	IBM_ACPIHANDLE_INIT(bay);
+	if (bay_handle)
+		IBM_ACPIHANDLE_INIT(bay_ej);
+	IBM_ACPIHANDLE_INIT(bay2);
+	if (bay2_handle)
+		IBM_ACPIHANDLE_INIT(bay2_ej);
+
+	tp_features.bay_status = bay_handle &&
+		acpi_evalf(bay_handle, NULL, "_STA", "qv");
+	tp_features.bay_status2 = bay2_handle &&
+		acpi_evalf(bay2_handle, NULL, "_STA", "qv");
+
+	tp_features.bay_eject = bay_handle && bay_ej_handle &&
+		(strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
+	tp_features.bay_eject2 = bay2_handle && bay2_ej_handle &&
+		(strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
+
+	vdbg_printk(TPACPI_DBG_INIT,
+		"bay 1: status %s, eject %s; bay 2: status %s, eject %s\n",
+		str_supported(tp_features.bay_status),
+		str_supported(tp_features.bay_eject),
+		str_supported(tp_features.bay_status2),
+		str_supported(tp_features.bay_eject2));
+
+	return (tp_features.bay_status || tp_features.bay_eject ||
+		tp_features.bay_status2 || tp_features.bay_eject2)? 0 : 1;
+}
+
+static void bay_notify(struct ibm_struct *ibm, u32 event)
+{
+	acpi_bus_generate_event(ibm->acpi->device, event, 0);
+}
+
+#define bay_occupied(b) (_sta(b##_handle) & 1)
+
+static int bay_read(char *p)
+{
+	int len = 0;
+	int occupied = bay_occupied(bay);
+	int occupied2 = bay_occupied(bay2);
+	int eject, eject2;
+
+	len += sprintf(p + len, "status:\t\t%s\n",
+		tp_features.bay_status ?
+			(occupied ? "occupied" : "unoccupied") :
+				"not supported");
+	if (tp_features.bay_status2)
+		len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
+			       "occupied" : "unoccupied");
+
+	eject = tp_features.bay_eject && occupied;
+	eject2 = tp_features.bay_eject2 && occupied2;
+
+	if (eject && eject2)
+		len += sprintf(p + len, "commands:\teject, eject2\n");
+	else if (eject)
+		len += sprintf(p + len, "commands:\teject\n");
+	else if (eject2)
+		len += sprintf(p + len, "commands:\teject2\n");
+
+	return len;
+}
+
+static int bay_write(char *buf)
+{
+	char *cmd;
+
+	if (!tp_features.bay_eject && !tp_features.bay_eject2)
+		return -ENODEV;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (tp_features.bay_eject && strlencmp(cmd, "eject") == 0) {
+			if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
+				return -EIO;
+		} else if (tp_features.bay_eject2 &&
+			   strlencmp(cmd, "eject2") == 0) {
+			if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
+				return -EIO;
+		} else
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct tp_acpi_drv_struct ibm_bay_acpidriver = {
+	.notify = bay_notify,
+	.handle = &bay_handle,
+	.type = ACPI_SYSTEM_NOTIFY,
+};
+
+static struct ibm_struct bay_driver_data = {
+	.name = "bay",
+	.read = bay_read,
+	.write = bay_write,
+	.acpi = &ibm_bay_acpidriver,
+};
+
+#endif /* CONFIG_THINKPAD_ACPI_BAY */
+
+/*************************************************************************
+ * CMOS subdriver
+ */
+
+/* sysfs cmos_command -------------------------------------------------- */
+static ssize_t cmos_command_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	unsigned long cmos_cmd;
+	int res;
+
+	if (parse_strtoul(buf, 21, &cmos_cmd))
+		return -EINVAL;
+
+	res = issue_thinkpad_cmos_command(cmos_cmd);
+	return (res)? res : count;
+}
+
+static struct device_attribute dev_attr_cmos_command =
+	__ATTR(cmos_command, S_IWUSR, NULL, cmos_command_store);
+
+/* --------------------------------------------------------------------- */
+
+static int __init cmos_init(struct ibm_init_struct *iibm)
+{
+	int res;
+
+	vdbg_printk(TPACPI_DBG_INIT,
+		"initializing cmos commands subdriver\n");
+
+	IBM_ACPIHANDLE_INIT(cmos);
+
+	vdbg_printk(TPACPI_DBG_INIT, "cmos commands are %s\n",
+		str_supported(cmos_handle != NULL));
+
+	res = device_create_file(&tpacpi_pdev->dev, &dev_attr_cmos_command);
+	if (res)
+		return res;
+
+	return (cmos_handle)? 0 : 1;
+}
+
+static void cmos_exit(void)
+{
+	device_remove_file(&tpacpi_pdev->dev, &dev_attr_cmos_command);
+}
+
+static int cmos_read(char *p)
+{
+	int len = 0;
+
+	/* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+	   R30, R31, T20-22, X20-21 */
+	if (!cmos_handle)
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+	else {
+		len += sprintf(p + len, "status:\t\tsupported\n");
+		len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-21)\n");
+	}
+
+	return len;
+}
+
+static int cmos_write(char *buf)
+{
+	char *cmd;
+	int cmos_cmd, res;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (sscanf(cmd, "%u", &cmos_cmd) == 1 &&
+		    cmos_cmd >= 0 && cmos_cmd <= 21) {
+			/* cmos_cmd set */
+		} else
+			return -EINVAL;
+
+		res = issue_thinkpad_cmos_command(cmos_cmd);
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
+
+static struct ibm_struct cmos_driver_data = {
+	.name = "cmos",
+	.read = cmos_read,
+	.write = cmos_write,
+	.exit = cmos_exit,
+};
+
+/*************************************************************************
+ * LED subdriver
+ */
+
+static enum led_access_mode led_supported;
+
+IBM_HANDLE(led, ec, "SLED",	/* 570 */
+	   "SYSL",		/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
+	   "LED",		/* all others */
+	   );			/* R30, R31 */
+
+static int __init led_init(struct ibm_init_struct *iibm)
+{
+	vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
+
+	IBM_ACPIHANDLE_INIT(led);
+
+	if (!led_handle)
+		/* led not supported on R30, R31 */
+		led_supported = TPACPI_LED_NONE;
+	else if (strlencmp(led_path, "SLED") == 0)
+		/* 570 */
+		led_supported = TPACPI_LED_570;
+	else if (strlencmp(led_path, "SYSL") == 0)
+		/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
+		led_supported = TPACPI_LED_OLD;
+	else
+		/* all others */
+		led_supported = TPACPI_LED_NEW;
+
+	vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
+		str_supported(led_supported), led_supported);
+
+	return (led_supported != TPACPI_LED_NONE)? 0 : 1;
+}
+
+#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking"))
+
+static int led_read(char *p)
+{
+	int len = 0;
+
+	if (!led_supported) {
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+		return len;
+	}
+	len += sprintf(p + len, "status:\t\tsupported\n");
+
+	if (led_supported == TPACPI_LED_570) {
+		/* 570 */
+		int i, status;
+		for (i = 0; i < 8; i++) {
+			if (!acpi_evalf(ec_handle,
+					&status, "GLED", "dd", 1 << i))
+				return -EIO;
+			len += sprintf(p + len, "%d:\t\t%s\n",
+				       i, led_status(status));
+		}
+	}
+
+	len += sprintf(p + len, "commands:\t"
+		       "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
+
+	return len;
+}
+
+/* off, on, blink */
+static const int led_sled_arg1[] = { 0, 1, 3 };
+static const int led_exp_hlbl[] = { 0, 0, 1 };	/* led# * */
+static const int led_exp_hlcl[] = { 0, 1, 1 };	/* led# * */
+static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
+
+static int led_write(char *buf)
+{
+	char *cmd;
+	int led, ind, ret;
+
+	if (!led_supported)
+		return -ENODEV;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
+			return -EINVAL;
+
+		if (strstr(cmd, "off")) {
+			ind = 0;
+		} else if (strstr(cmd, "on")) {
+			ind = 1;
+		} else if (strstr(cmd, "blink")) {
+			ind = 2;
+		} else
+			return -EINVAL;
+
+		if (led_supported == TPACPI_LED_570) {
+			/* 570 */
+			led = 1 << led;
+			if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+					led, led_sled_arg1[ind]))
+				return -EIO;
+		} else if (led_supported == TPACPI_LED_OLD) {
+			/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
+			led = 1 << led;
+			ret = ec_write(TPACPI_LED_EC_HLMS, led);
+			if (ret >= 0)
+				ret =
+				    ec_write(TPACPI_LED_EC_HLBL,
+				    	     led * led_exp_hlbl[ind]);
+			if (ret >= 0)
+				ret =
+				    ec_write(TPACPI_LED_EC_HLCL,
+				    	     led * led_exp_hlcl[ind]);
+			if (ret < 0)
+				return ret;
+		} else {
+			/* all others */
+			if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+					led, led_led_arg1[ind]))
+				return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static struct ibm_struct led_driver_data = {
+	.name = "led",
+	.read = led_read,
+	.write = led_write,
+};
+
+/*************************************************************************
+ * Beep subdriver
+ */
+
+IBM_HANDLE(beep, ec, "BEEP");	/* all except R30, R31 */
+
+static int __init beep_init(struct ibm_init_struct *iibm)
+{
+	vdbg_printk(TPACPI_DBG_INIT, "initializing beep subdriver\n");
+
+	IBM_ACPIHANDLE_INIT(beep);
+
+	vdbg_printk(TPACPI_DBG_INIT, "beep is %s\n",
+		str_supported(beep_handle != NULL));
+
+	return (beep_handle)? 0 : 1;
+}
+
+static int beep_read(char *p)
+{
+	int len = 0;
+
+	if (!beep_handle)
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+	else {
+		len += sprintf(p + len, "status:\t\tsupported\n");
+		len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-17)\n");
+	}
+
+	return len;
+}
+
+static int beep_write(char *buf)
+{
+	char *cmd;
+	int beep_cmd;
+
+	if (!beep_handle)
+		return -ENODEV;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (sscanf(cmd, "%u", &beep_cmd) == 1 &&
+		    beep_cmd >= 0 && beep_cmd <= 17) {
+			/* beep_cmd set */
+		} else
+			return -EINVAL;
+		if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
+			return -EIO;
+	}
+
+	return 0;
+}
+
+static struct ibm_struct beep_driver_data = {
+	.name = "beep",
+	.read = beep_read,
+	.write = beep_write,
+};
+
+/*************************************************************************
+ * Thermal subdriver
+ */
+
+static enum thermal_access_mode thermal_read_mode;
+
+/* sysfs temp##_input -------------------------------------------------- */
+
+static ssize_t thermal_temp_input_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct sensor_device_attribute *sensor_attr =
+					to_sensor_dev_attr(attr);
+	int idx = sensor_attr->index;
+	s32 value;
+	int res;
+
+	res = thermal_get_sensor(idx, &value);
+	if (res)
+		return res;
+	if (value == TP_EC_THERMAL_TMP_NA * 1000)
+		return -ENXIO;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+#define THERMAL_SENSOR_ATTR_TEMP(_idxA, _idxB) \
+	 SENSOR_ATTR(temp##_idxA##_input, S_IRUGO, thermal_temp_input_show, NULL, _idxB)
+
+static struct sensor_device_attribute sensor_dev_attr_thermal_temp_input[] = {
+	THERMAL_SENSOR_ATTR_TEMP(1, 0),
+	THERMAL_SENSOR_ATTR_TEMP(2, 1),
+	THERMAL_SENSOR_ATTR_TEMP(3, 2),
+	THERMAL_SENSOR_ATTR_TEMP(4, 3),
+	THERMAL_SENSOR_ATTR_TEMP(5, 4),
+	THERMAL_SENSOR_ATTR_TEMP(6, 5),
+	THERMAL_SENSOR_ATTR_TEMP(7, 6),
+	THERMAL_SENSOR_ATTR_TEMP(8, 7),
+	THERMAL_SENSOR_ATTR_TEMP(9, 8),
+	THERMAL_SENSOR_ATTR_TEMP(10, 9),
+	THERMAL_SENSOR_ATTR_TEMP(11, 10),
+	THERMAL_SENSOR_ATTR_TEMP(12, 11),
+	THERMAL_SENSOR_ATTR_TEMP(13, 12),
+	THERMAL_SENSOR_ATTR_TEMP(14, 13),
+	THERMAL_SENSOR_ATTR_TEMP(15, 14),
+	THERMAL_SENSOR_ATTR_TEMP(16, 15),
+};
+
+#define THERMAL_ATTRS(X) \
+	&sensor_dev_attr_thermal_temp_input[X].dev_attr.attr
+
+static struct attribute *thermal_temp_input_attr[] = {
+	THERMAL_ATTRS(8),
+	THERMAL_ATTRS(9),
+	THERMAL_ATTRS(10),
+	THERMAL_ATTRS(11),
+	THERMAL_ATTRS(12),
+	THERMAL_ATTRS(13),
+	THERMAL_ATTRS(14),
+	THERMAL_ATTRS(15),
+	THERMAL_ATTRS(0),
+	THERMAL_ATTRS(1),
+	THERMAL_ATTRS(2),
+	THERMAL_ATTRS(3),
+	THERMAL_ATTRS(4),
+	THERMAL_ATTRS(5),
+	THERMAL_ATTRS(6),
+	THERMAL_ATTRS(7),
+	NULL
+};
+
+static const struct attribute_group thermal_temp_input16_group = {
+	.attrs = thermal_temp_input_attr
+};
+
+static const struct attribute_group thermal_temp_input8_group = {
+	.attrs = &thermal_temp_input_attr[8]
+};
+
+#undef THERMAL_SENSOR_ATTR_TEMP
+#undef THERMAL_ATTRS
+
+/* --------------------------------------------------------------------- */
+
+static int __init thermal_init(struct ibm_init_struct *iibm)
+{
+	u8 t, ta1, ta2;
+	int i;
+	int acpi_tmp7;
+	int res;
+
+	vdbg_printk(TPACPI_DBG_INIT, "initializing thermal subdriver\n");
+
+	acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
+
+	if (ibm_thinkpad_ec_found && experimental) {
+		/*
+		 * Direct EC access mode: sensors at registers
+		 * 0x78-0x7F, 0xC0-0xC7.  Registers return 0x00 for
+		 * non-implemented, thermal sensors return 0x80 when
+		 * not available
+		 */
+
+		ta1 = ta2 = 0;
+		for (i = 0; i < 8; i++) {
+			if (acpi_ec_read(TP_EC_THERMAL_TMP0 + i, &t)) {
+				ta1 |= t;
+			} else {
+				ta1 = 0;
+				break;
+			}
+			if (acpi_ec_read(TP_EC_THERMAL_TMP8 + i, &t)) {
+				ta2 |= t;
+			} else {
+				ta1 = 0;
+				break;
+			}
+		}
+		if (ta1 == 0) {
+			/* This is sheer paranoia, but we handle it anyway */
+			if (acpi_tmp7) {
+				printk(IBM_ERR
+				       "ThinkPad ACPI EC access misbehaving, "
+				       "falling back to ACPI TMPx access mode\n");
+				thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07;
+			} else {
+				printk(IBM_ERR
+				       "ThinkPad ACPI EC access misbehaving, "
+				       "disabling thermal sensors access\n");
+				thermal_read_mode = TPACPI_THERMAL_NONE;
+			}
+		} else {
+			thermal_read_mode =
+			    (ta2 != 0) ?
+			    TPACPI_THERMAL_TPEC_16 : TPACPI_THERMAL_TPEC_8;
+		}
+	} else if (acpi_tmp7) {
+		if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) {
+			/* 600e/x, 770e, 770x */
+			thermal_read_mode = TPACPI_THERMAL_ACPI_UPDT;
+		} else {
+			/* Standard ACPI TMPx access, max 8 sensors */
+			thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07;
+		}
+	} else {
+		/* temperatures not supported on 570, G4x, R30, R31, R32 */
+		thermal_read_mode = TPACPI_THERMAL_NONE;
+	}
+
+	vdbg_printk(TPACPI_DBG_INIT, "thermal is %s, mode %d\n",
+		str_supported(thermal_read_mode != TPACPI_THERMAL_NONE),
+		thermal_read_mode);
+
+	switch(thermal_read_mode) {
+	case TPACPI_THERMAL_TPEC_16:
+		res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+				&thermal_temp_input16_group);
+		if (res)
+			return res;
+		break;
+	case TPACPI_THERMAL_TPEC_8:
+	case TPACPI_THERMAL_ACPI_TMP07:
+	case TPACPI_THERMAL_ACPI_UPDT:
+		res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+				&thermal_temp_input8_group);
+		if (res)
+			return res;
+		break;
+	case TPACPI_THERMAL_NONE:
+	default:
+		return 1;
+	}
+
+	return 0;
+}
+
+static void thermal_exit(void)
+{
+	switch(thermal_read_mode) {
+	case TPACPI_THERMAL_TPEC_16:
+		sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+				   &thermal_temp_input16_group);
+		break;
+	case TPACPI_THERMAL_TPEC_8:
+	case TPACPI_THERMAL_ACPI_TMP07:
+	case TPACPI_THERMAL_ACPI_UPDT:
+		sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+				   &thermal_temp_input16_group);
+		break;
+	case TPACPI_THERMAL_NONE:
+	default:
+		break;
+	}
+}
+
+/* idx is zero-based */
+static int thermal_get_sensor(int idx, s32 *value)
+{
+	int t;
+	s8 tmp;
+	char tmpi[5];
+
+	t = TP_EC_THERMAL_TMP0;
+
+	switch (thermal_read_mode) {
+#if TPACPI_MAX_THERMAL_SENSORS >= 16
+	case TPACPI_THERMAL_TPEC_16:
+		if (idx >= 8 && idx <= 15) {
+			t = TP_EC_THERMAL_TMP8;
+			idx -= 8;
+		}
+		/* fallthrough */
+#endif
+	case TPACPI_THERMAL_TPEC_8:
+		if (idx <= 7) {
+			if (!acpi_ec_read(t + idx, &tmp))
+				return -EIO;
+			*value = tmp * 1000;
+			return 0;
+		}
+		break;
+
+	case TPACPI_THERMAL_ACPI_UPDT:
+		if (idx <= 7) {
+			snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx);
+			if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
+				return -EIO;
+			if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
+				return -EIO;
+			*value = (t - 2732) * 100;
+			return 0;
+		}
+		break;
+
+	case TPACPI_THERMAL_ACPI_TMP07:
+		if (idx <= 7) {
+			snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx);
+			if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
+				return -EIO;
+			*value = t * 1000;
+			return 0;
+		}
+		break;
+
+	case TPACPI_THERMAL_NONE:
+	default:
+		return -ENOSYS;
+	}
+
+	return -EINVAL;
+}
+
+static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
+{
+	int res, i;
+	int n;
+
+	n = 8;
+	i = 0;
+
+	if (!s)
+		return -EINVAL;
+
+	if (thermal_read_mode == TPACPI_THERMAL_TPEC_16)
+		n = 16;
+
+	for(i = 0 ; i < n; i++) {
+		res = thermal_get_sensor(i, &s->temp[i]);
+		if (res)
+			return res;
+	}
+
+	return n;
+}
+
+static int thermal_read(char *p)
+{
+	int len = 0;
+	int n, i;
+	struct ibm_thermal_sensors_struct t;
+
+	n = thermal_get_sensors(&t);
+	if (unlikely(n < 0))
+		return n;
+
+	len += sprintf(p + len, "temperatures:\t");
+
+	if (n > 0) {
+		for (i = 0; i < (n - 1); i++)
+			len += sprintf(p + len, "%d ", t.temp[i] / 1000);
+		len += sprintf(p + len, "%d\n", t.temp[i] / 1000);
+	} else
+		len += sprintf(p + len, "not supported\n");
+
+	return len;
+}
+
+static struct ibm_struct thermal_driver_data = {
+	.name = "thermal",
+	.read = thermal_read,
+	.exit = thermal_exit,
+};
+
+/*************************************************************************
+ * EC Dump subdriver
+ */
+
+static u8 ecdump_regs[256];
+
+static int ecdump_read(char *p)
+{
+	int len = 0;
+	int i, j;
+	u8 v;
+
+	len += sprintf(p + len, "EC      "
+		       " +00 +01 +02 +03 +04 +05 +06 +07"
+		       " +08 +09 +0a +0b +0c +0d +0e +0f\n");
+	for (i = 0; i < 256; i += 16) {
+		len += sprintf(p + len, "EC 0x%02x:", i);
+		for (j = 0; j < 16; j++) {
+			if (!acpi_ec_read(i + j, &v))
+				break;
+			if (v != ecdump_regs[i + j])
+				len += sprintf(p + len, " *%02x", v);
+			else
+				len += sprintf(p + len, "  %02x", v);
+			ecdump_regs[i + j] = v;
+		}
+		len += sprintf(p + len, "\n");
+		if (j != 16)
+			break;
+	}
+
+	/* These are way too dangerous to advertise openly... */
+#if 0
+	len += sprintf(p + len, "commands:\t0x<offset> 0x<value>"
+		       " (<offset> is 00-ff, <value> is 00-ff)\n");
+	len += sprintf(p + len, "commands:\t0x<offset> <value>  "
+		       " (<offset> is 00-ff, <value> is 0-255)\n");
+#endif
+	return len;
+}
+
+static int ecdump_write(char *buf)
+{
+	char *cmd;
+	int i, v;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) {
+			/* i and v set */
+		} else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) {
+			/* i and v set */
+		} else
+			return -EINVAL;
+		if (i >= 0 && i < 256 && v >= 0 && v < 256) {
+			if (!acpi_ec_write(i, v))
+				return -EIO;
+		} else
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct ibm_struct ecdump_driver_data = {
+	.name = "ecdump",
+	.read = ecdump_read,
+	.write = ecdump_write,
+	.flags.experimental = 1,
+};
+
+/*************************************************************************
+ * Backlight/brightness subdriver
+ */
+
+static struct backlight_device *ibm_backlight_device = NULL;
+
+static struct backlight_ops ibm_backlight_data = {
+        .get_brightness = brightness_get,
+        .update_status  = brightness_update_status,
+};
+
+static int __init brightness_init(struct ibm_init_struct *iibm)
+{
+	int b;
+
+	vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
+
+	b = brightness_get(NULL);
+	if (b < 0)
+		return b;
+
+	ibm_backlight_device = backlight_device_register(
+					TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL,
+					&ibm_backlight_data);
+	if (IS_ERR(ibm_backlight_device)) {
+		printk(IBM_ERR "Could not register backlight device\n");
+		return PTR_ERR(ibm_backlight_device);
+	}
+	vdbg_printk(TPACPI_DBG_INIT, "brightness is supported\n");
+
+	ibm_backlight_device->props.max_brightness = 7;
+	ibm_backlight_device->props.brightness = b;
+	backlight_update_status(ibm_backlight_device);
+
+	return 0;
+}
+
+static void brightness_exit(void)
+{
+	if (ibm_backlight_device) {
+		vdbg_printk(TPACPI_DBG_EXIT,
+			    "calling backlight_device_unregister()\n");
+		backlight_device_unregister(ibm_backlight_device);
+		ibm_backlight_device = NULL;
+	}
+}
+
+static int brightness_update_status(struct backlight_device *bd)
+{
+	return brightness_set(
+		(bd->props.fb_blank == FB_BLANK_UNBLANK &&
+		 bd->props.power == FB_BLANK_UNBLANK) ?
+				bd->props.brightness : 0);
+}
+
+static int brightness_get(struct backlight_device *bd)
+{
+	u8 level;
+	if (!acpi_ec_read(brightness_offset, &level))
+		return -EIO;
+
+	level &= 0x7;
+
+	return level;
+}
+
+static int brightness_set(int value)
+{
+	int cmos_cmd, inc, i;
+	int current_value = brightness_get(NULL);
+
+	value &= 7;
+
+	cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN;
+	inc = value > current_value ? 1 : -1;
+	for (i = current_value; i != value; i += inc) {
+		if (issue_thinkpad_cmos_command(cmos_cmd))
+			return -EIO;
+		if (!acpi_ec_write(brightness_offset, i + inc))
+			return -EIO;
+	}
+
+	return 0;
+}
+
+static int brightness_read(char *p)
+{
+	int len = 0;
+	int level;
+
+	if ((level = brightness_get(NULL)) < 0) {
+		len += sprintf(p + len, "level:\t\tunreadable\n");
+	} else {
+		len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
+		len += sprintf(p + len, "commands:\tup, down\n");
+		len += sprintf(p + len, "commands:\tlevel <level>"
+			       " (<level> is 0-7)\n");
+	}
+
+	return len;
+}
+
+static int brightness_write(char *buf)
+{
+	int level;
+	int new_level;
+	char *cmd;
+
+	while ((cmd = next_cmd(&buf))) {
+		if ((level = brightness_get(NULL)) < 0)
+			return level;
+		level &= 7;
+
+		if (strlencmp(cmd, "up") == 0) {
+			new_level = level == 7 ? 7 : level + 1;
+		} else if (strlencmp(cmd, "down") == 0) {
+			new_level = level == 0 ? 0 : level - 1;
+		} else if (sscanf(cmd, "level %d", &new_level) == 1 &&
+			   new_level >= 0 && new_level <= 7) {
+			/* new_level set */
+		} else
+			return -EINVAL;
+
+		brightness_set(new_level);
+	}
+
+	return 0;
+}
+
+static struct ibm_struct brightness_driver_data = {
+	.name = "brightness",
+	.read = brightness_read,
+	.write = brightness_write,
+	.exit = brightness_exit,
+};
+
+/*************************************************************************
+ * Volume subdriver
+ */
+
+static int volume_read(char *p)
+{
+	int len = 0;
+	u8 level;
+
+	if (!acpi_ec_read(volume_offset, &level)) {
+		len += sprintf(p + len, "level:\t\tunreadable\n");
+	} else {
+		len += sprintf(p + len, "level:\t\t%d\n", level & 0xf);
+		len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6));
+		len += sprintf(p + len, "commands:\tup, down, mute\n");
+		len += sprintf(p + len, "commands:\tlevel <level>"
+			       " (<level> is 0-15)\n");
+	}
+
+	return len;
+}
+
+static int volume_write(char *buf)
+{
+	int cmos_cmd, inc, i;
+	u8 level, mute;
+	int new_level, new_mute;
+	char *cmd;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (!acpi_ec_read(volume_offset, &level))
+			return -EIO;
+		new_mute = mute = level & 0x40;
+		new_level = level = level & 0xf;
+
+		if (strlencmp(cmd, "up") == 0) {
+			if (mute)
+				new_mute = 0;
+			else
+				new_level = level == 15 ? 15 : level + 1;
+		} else if (strlencmp(cmd, "down") == 0) {
+			if (mute)
+				new_mute = 0;
+			else
+				new_level = level == 0 ? 0 : level - 1;
+		} else if (sscanf(cmd, "level %d", &new_level) == 1 &&
+			   new_level >= 0 && new_level <= 15) {
+			/* new_level set */
+		} else if (strlencmp(cmd, "mute") == 0) {
+			new_mute = 0x40;
+		} else
+			return -EINVAL;
+
+		if (new_level != level) {	/* mute doesn't change */
+			cmos_cmd = new_level > level ? TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN;
+			inc = new_level > level ? 1 : -1;
+
+			if (mute && (issue_thinkpad_cmos_command(cmos_cmd) ||
+				     !acpi_ec_write(volume_offset, level)))
+				return -EIO;
+
+			for (i = level; i != new_level; i += inc)
+				if (issue_thinkpad_cmos_command(cmos_cmd) ||
+				    !acpi_ec_write(volume_offset, i + inc))
+					return -EIO;
+
+			if (mute && (issue_thinkpad_cmos_command(TP_CMOS_VOLUME_MUTE) ||
+				     !acpi_ec_write(volume_offset,
+						    new_level + mute)))
+				return -EIO;
+		}
+
+		if (new_mute != mute) {	/* level doesn't change */
+			cmos_cmd = new_mute ? TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP;
+
+			if (issue_thinkpad_cmos_command(cmos_cmd) ||
+			    !acpi_ec_write(volume_offset, level + new_mute))
+				return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static struct ibm_struct volume_driver_data = {
+	.name = "volume",
+	.read = volume_read,
+	.write = volume_write,
+};
+
+/*************************************************************************
+ * Fan subdriver
+ */
+
+/*
+ * FAN ACCESS MODES
+ *
+ * TPACPI_FAN_RD_ACPI_GFAN:
+ * 	ACPI GFAN method: returns fan level
+ *
+ * 	see TPACPI_FAN_WR_ACPI_SFAN
+ * 	EC 0x2f (HFSP) not available if GFAN exists
+ *
+ * TPACPI_FAN_WR_ACPI_SFAN:
+ * 	ACPI SFAN method: sets fan level, 0 (stop) to 7 (max)
+ *
+ * 	EC 0x2f (HFSP) might be available *for reading*, but do not use
+ * 	it for writing.
+ *
+ * TPACPI_FAN_WR_TPEC:
+ * 	ThinkPad EC register 0x2f (HFSP): fan control loop mode
+ * 	Supported on almost all ThinkPads
+ *
+ * 	Fan speed changes of any sort (including those caused by the
+ * 	disengaged mode) are usually done slowly by the firmware as the
+ * 	maximum ammount of fan duty cycle change per second seems to be
+ * 	limited.
+ *
+ * 	Reading is not available if GFAN exists.
+ * 	Writing is not available if SFAN exists.
+ *
+ * 	Bits
+ *	 7	automatic mode engaged;
+ *  		(default operation mode of the ThinkPad)
+ * 		fan level is ignored in this mode.
+ *	 6	full speed mode (takes precedence over bit 7);
+ *		not available on all thinkpads.  May disable
+ *		the tachometer while the fan controller ramps up
+ *		the speed (which can take up to a few *minutes*).
+ *		Speeds up fan to 100% duty-cycle, which is far above
+ *		the standard RPM levels.  It is not impossible that
+ *		it could cause hardware damage.
+ *	5-3	unused in some models.  Extra bits for fan level
+ *		in others, but still useless as all values above
+ *		7 map to the same speed as level 7 in these models.
+ *	2-0	fan level (0..7 usually)
+ *			0x00 = stop
+ * 			0x07 = max (set when temperatures critical)
+ * 		Some ThinkPads may have other levels, see
+ * 		TPACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
+ *
+ *	FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
+ *	boot. Apparently the EC does not intialize it, so unless ACPI DSDT
+ *	does so, its initial value is meaningless (0x07).
+ *
+ *	For firmware bugs, refer to:
+ *	http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
+ *
+ * 	----
+ *
+ *	ThinkPad EC register 0x84 (LSB), 0x85 (MSB):
+ *	Main fan tachometer reading (in RPM)
+ *
+ *	This register is present on all ThinkPads with a new-style EC, and
+ *	it is known not to be present on the A21m/e, and T22, as there is
+ *	something else in offset 0x84 according to the ACPI DSDT.  Other
+ *	ThinkPads from this same time period (and earlier) probably lack the
+ *	tachometer as well.
+ *
+ *	Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
+ *	was never fixed by IBM to report the EC firmware version string
+ *	probably support the tachometer (like the early X models), so
+ *	detecting it is quite hard.  We need more data to know for sure.
+ *
+ *	FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings
+ *	might result.
+ *
+ *	FIRMWARE BUG: may go stale while the EC is switching to full speed
+ *	mode.
+ *
+ *	For firmware bugs, refer to:
+ *	http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
+ *
+ * TPACPI_FAN_WR_ACPI_FANS:
+ *	ThinkPad X31, X40, X41.  Not available in the X60.
+ *
+ *	FANS ACPI handle: takes three arguments: low speed, medium speed,
+ *	high speed.  ACPI DSDT seems to map these three speeds to levels
+ *	as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH
+ *	(this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3")
+ *
+ * 	The speeds are stored on handles
+ * 	(FANA:FAN9), (FANC:FANB), (FANE:FAND).
+ *
+ * 	There are three default speed sets, acessible as handles:
+ * 	FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
+ *
+ * 	ACPI DSDT switches which set is in use depending on various
+ * 	factors.
+ *
+ * 	TPACPI_FAN_WR_TPEC is also available and should be used to
+ * 	command the fan.  The X31/X40/X41 seems to have 8 fan levels,
+ * 	but the ACPI tables just mention level 7.
+ */
+
+static enum fan_status_access_mode fan_status_access_mode;
+static enum fan_control_access_mode fan_control_access_mode;
+static enum fan_control_commands fan_control_commands;
+
+static u8 fan_control_initial_status;
+static u8 fan_control_desired_level;
+
+static void fan_watchdog_fire(struct work_struct *ignored);
+static int fan_watchdog_maxinterval;
+static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire);
+
+IBM_HANDLE(fans, ec, "FANS");	/* X31, X40, X41 */
+IBM_HANDLE(gfan, ec, "GFAN",	/* 570 */
+	   "\\FSPD",		/* 600e/x, 770e, 770x */
+	   );			/* all others */
+IBM_HANDLE(sfan, ec, "SFAN",	/* 570 */
+	   "JFNS",		/* 770x-JL */
+	   );			/* all others */
+
+/*
+ * SYSFS fan layout: hwmon compatible (device)
+ *
+ * pwm*_enable:
+ * 	0: "disengaged" mode
+ * 	1: manual mode
+ * 	2: native EC "auto" mode (recommended, hardware default)
+ *
+ * pwm*: set speed in manual mode, ignored otherwise.
+ * 	0 is level 0; 255 is level 7. Intermediate points done with linear
+ * 	interpolation.
+ *
+ * fan*_input: tachometer reading, RPM
+ *
+ *
+ * SYSFS fan layout: extensions
+ *
+ * fan_watchdog (driver):
+ * 	fan watchdog interval in seconds, 0 disables (default), max 120
+ */
+
+/* sysfs fan pwm1_enable ----------------------------------------------- */
+static ssize_t fan_pwm1_enable_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	int res, mode;
+	u8 status;
+
+	res = fan_get_status_safe(&status);
+	if (res)
+		return res;
+
+	if (unlikely(tp_features.fan_ctrl_status_undef)) {
+		if (status != fan_control_initial_status) {
+			tp_features.fan_ctrl_status_undef = 0;
+		} else {
+			/* Return most likely status. In fact, it
+			 * might be the only possible status */
+			status = TP_EC_FAN_AUTO;
+		}
+	}
+
+	if (status & TP_EC_FAN_FULLSPEED) {
+		mode = 0;
+	} else if (status & TP_EC_FAN_AUTO) {
+		mode = 2;
+	} else
+		mode = 1;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", mode);
+}
+
+static ssize_t fan_pwm1_enable_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	unsigned long t;
+	int res, level;
+
+	if (parse_strtoul(buf, 2, &t))
+		return -EINVAL;
+
+	switch (t) {
+	case 0:
+		level = TP_EC_FAN_FULLSPEED;
+		break;
+	case 1:
+		level = TPACPI_FAN_LAST_LEVEL;
+		break;
+	case 2:
+		level = TP_EC_FAN_AUTO;
+		break;
+	case 3:
+		/* reserved for software-controlled auto mode */
+		return -ENOSYS;
+	default:
+		return -EINVAL;
+	}
+
+	res = fan_set_level_safe(level);
+	if (res == -ENXIO)
+		return -EINVAL;
+	else if (res < 0)
+		return res;
+
+	fan_watchdog_reset();
+
+	return count;
+}
+
+static struct device_attribute dev_attr_fan_pwm1_enable =
+	__ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+		fan_pwm1_enable_show, fan_pwm1_enable_store);
+
+/* sysfs fan pwm1 ------------------------------------------------------ */
+static ssize_t fan_pwm1_show(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	int res;
+	u8 status;
+
+	res = fan_get_status_safe(&status);
+	if (res)
+		return res;
+
+	if (unlikely(tp_features.fan_ctrl_status_undef)) {
+		if (status != fan_control_initial_status) {
+			tp_features.fan_ctrl_status_undef = 0;
+		} else {
+			status = TP_EC_FAN_AUTO;
+		}
+	}
+
+	if ((status &
+	     (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) != 0)
+		status = fan_control_desired_level;
+
+	if (status > 7)
+		status = 7;
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", (status * 255) / 7);
+}
+
+static ssize_t fan_pwm1_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	unsigned long s;
+	int rc;
+	u8 status, newlevel;
+
+	if (parse_strtoul(buf, 255, &s))
+		return -EINVAL;
+
+	/* scale down from 0-255 to 0-7 */
+	newlevel = (s >> 5) & 0x07;
+
+	rc = mutex_lock_interruptible(&fan_mutex);
+	if (rc < 0)
+		return rc;
+
+	rc = fan_get_status(&status);
+	if (!rc && (status &
+		    (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) == 0) {
+		rc = fan_set_level(newlevel);
+		if (rc == -ENXIO)
+			rc = -EINVAL;
+		else if (!rc) {
+			fan_update_desired_level(newlevel);
+			fan_watchdog_reset();
+		}
+	}
+
+	mutex_unlock(&fan_mutex);
+	return (rc)? rc : count;
+}
+
+static struct device_attribute dev_attr_fan_pwm1 =
+	__ATTR(pwm1, S_IWUSR | S_IRUGO,
+		fan_pwm1_show, fan_pwm1_store);
+
+/* sysfs fan fan1_input ------------------------------------------------ */
+static ssize_t fan_fan1_input_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	int res;
+	unsigned int speed;
+
+	res = fan_get_speed(&speed);
+	if (res < 0)
+		return res;
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", speed);
+}
+
+static struct device_attribute dev_attr_fan_fan1_input =
+	__ATTR(fan1_input, S_IRUGO,
+		fan_fan1_input_show, NULL);
+
+/* sysfs fan fan_watchdog (driver) ------------------------------------- */
+static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
+				     char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%u\n", fan_watchdog_maxinterval);
+}
+
+static ssize_t fan_fan_watchdog_store(struct device_driver *drv,
+				      const char *buf, size_t count)
+{
+	unsigned long t;
+
+	if (parse_strtoul(buf, 120, &t))
+		return -EINVAL;
+
+	if (!fan_control_allowed)
+		return -EPERM;
+
+	fan_watchdog_maxinterval = t;
+	fan_watchdog_reset();
+
+	return count;
+}
+
+static DRIVER_ATTR(fan_watchdog, S_IWUSR | S_IRUGO,
+		fan_fan_watchdog_show, fan_fan_watchdog_store);
+
+/* --------------------------------------------------------------------- */
+static struct attribute *fan_attributes[] = {
+	&dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr,
+	&dev_attr_fan_fan1_input.attr,
+	NULL
+};
+
+static const struct attribute_group fan_attr_group = {
+	.attrs = fan_attributes,
+};
+
+static int __init fan_init(struct ibm_init_struct *iibm)
+{
+	int rc;
+
+	vdbg_printk(TPACPI_DBG_INIT, "initializing fan subdriver\n");
+
+	mutex_init(&fan_mutex);
+	fan_status_access_mode = TPACPI_FAN_NONE;
+	fan_control_access_mode = TPACPI_FAN_WR_NONE;
+	fan_control_commands = 0;
+	fan_watchdog_maxinterval = 0;
+	tp_features.fan_ctrl_status_undef = 0;
+	fan_control_desired_level = 7;
+
+	IBM_ACPIHANDLE_INIT(fans);
+	IBM_ACPIHANDLE_INIT(gfan);
+	IBM_ACPIHANDLE_INIT(sfan);
+
+	if (gfan_handle) {
+		/* 570, 600e/x, 770e, 770x */
+		fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
+	} else {
+		/* all other ThinkPads: note that even old-style
+		 * ThinkPad ECs supports the fan control register */
+		if (likely(acpi_ec_read(fan_status_offset,
+					&fan_control_initial_status))) {
+			fan_status_access_mode = TPACPI_FAN_RD_TPEC;
+
+			/* In some ThinkPads, neither the EC nor the ACPI
+			 * DSDT initialize the fan status, and it ends up
+			 * being set to 0x07 when it *could* be either
+			 * 0x07 or 0x80.
+			 *
+			 * Enable for TP-1Y (T43), TP-78 (R51e),
+			 * TP-76 (R52), TP-70 (T43, R52), which are known
+			 * to be buggy. */
+			if (fan_control_initial_status == 0x07 &&
+			    ibm_thinkpad_ec_found &&
+			    ((ibm_thinkpad_ec_found[0] == '1' &&
+			      ibm_thinkpad_ec_found[1] == 'Y') ||
+			     (ibm_thinkpad_ec_found[0] == '7' &&
+			      (ibm_thinkpad_ec_found[1] == '6' ||
+			       ibm_thinkpad_ec_found[1] == '8' ||
+			       ibm_thinkpad_ec_found[1] == '0'))
+			    )) {
+				printk(IBM_NOTICE
+				       "fan_init: initial fan status is "
+				       "unknown, assuming it is in auto "
+				       "mode\n");
+				tp_features.fan_ctrl_status_undef = 1;
+			}
+		} else {
+			printk(IBM_ERR
+			       "ThinkPad ACPI EC access misbehaving, "
+			       "fan status and control unavailable\n");
+			return 1;
+		}
+	}
+
+	if (sfan_handle) {
+		/* 570, 770x-JL */
+		fan_control_access_mode = TPACPI_FAN_WR_ACPI_SFAN;
+		fan_control_commands |=
+		    TPACPI_FAN_CMD_LEVEL | TPACPI_FAN_CMD_ENABLE;
+	} else {
+		if (!gfan_handle) {
+			/* gfan without sfan means no fan control */
+			/* all other models implement TP EC 0x2f control */
+
+			if (fans_handle) {
+				/* X31, X40, X41 */
+				fan_control_access_mode =
+				    TPACPI_FAN_WR_ACPI_FANS;
+				fan_control_commands |=
+				    TPACPI_FAN_CMD_SPEED |
+				    TPACPI_FAN_CMD_LEVEL |
+				    TPACPI_FAN_CMD_ENABLE;
+			} else {
+				fan_control_access_mode = TPACPI_FAN_WR_TPEC;
+				fan_control_commands |=
+				    TPACPI_FAN_CMD_LEVEL |
+				    TPACPI_FAN_CMD_ENABLE;
+			}
+		}
+	}
+
+	vdbg_printk(TPACPI_DBG_INIT, "fan is %s, modes %d, %d\n",
+		str_supported(fan_status_access_mode != TPACPI_FAN_NONE ||
+		  fan_control_access_mode != TPACPI_FAN_WR_NONE),
+		fan_status_access_mode, fan_control_access_mode);
+
+	/* fan control master switch */
+	if (!fan_control_allowed) {
+		fan_control_access_mode = TPACPI_FAN_WR_NONE;
+		fan_control_commands = 0;
+		dbg_printk(TPACPI_DBG_INIT,
+			   "fan control features disabled by parameter\n");
+	}
+
+	/* update fan_control_desired_level */
+	if (fan_status_access_mode != TPACPI_FAN_NONE)
+		fan_get_status_safe(NULL);
+
+	if (fan_status_access_mode != TPACPI_FAN_NONE ||
+	    fan_control_access_mode != TPACPI_FAN_WR_NONE) {
+		rc = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+					 &fan_attr_group);
+		if (!(rc < 0))
+			rc = driver_create_file(&tpacpi_pdriver.driver,
+					&driver_attr_fan_watchdog);
+		if (rc < 0)
+			return rc;
+		return 0;
+	} else
+		return 1;
+}
+
+/*
+ * Call with fan_mutex held
+ */
+static void fan_update_desired_level(u8 status)
+{
+	if ((status &
+	     (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) == 0) {
+		if (status > 7)
+			fan_control_desired_level = 7;
+		else
+			fan_control_desired_level = status;
+	}
+}
+
+static int fan_get_status(u8 *status)
+{
+	u8 s;
+
+	/* TODO:
+	 * Add TPACPI_FAN_RD_ACPI_FANS ? */
+
+	switch (fan_status_access_mode) {
+	case TPACPI_FAN_RD_ACPI_GFAN:
+		/* 570, 600e/x, 770e, 770x */
+
+		if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
+			return -EIO;
+
+		if (likely(status))
+			*status = s & 0x07;
+
+		break;
+
+	case TPACPI_FAN_RD_TPEC:
+		/* all except 570, 600e/x, 770e, 770x */
+		if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
+			return -EIO;
+
+		if (likely(status))
+			*status = s;
+
+		break;
+
+	default:
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static int fan_get_status_safe(u8 *status)
+{
+	int rc;
+	u8 s;
+
+	rc = mutex_lock_interruptible(&fan_mutex);
+	if (rc < 0)
+		return rc;
+	rc = fan_get_status(&s);
+	if (!rc)
+		fan_update_desired_level(s);
+	mutex_unlock(&fan_mutex);
+
+	if (status)
+		*status = s;
+
+	return rc;
+}
+
+static void fan_exit(void)
+{
+	vdbg_printk(TPACPI_DBG_EXIT, "cancelling any pending fan watchdog tasks\n");
+
+	/* FIXME: can we really do this unconditionally? */
+	sysfs_remove_group(&tpacpi_pdev->dev.kobj, &fan_attr_group);
+	driver_remove_file(&tpacpi_pdriver.driver, &driver_attr_fan_watchdog);
+
+	cancel_delayed_work(&fan_watchdog_task);
+	flush_scheduled_work();
+}
+
+static int fan_get_speed(unsigned int *speed)
+{
+	u8 hi, lo;
+
+	switch (fan_status_access_mode) {
+	case TPACPI_FAN_RD_TPEC:
+		/* all except 570, 600e/x, 770e, 770x */
+		if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
+			     !acpi_ec_read(fan_rpm_offset + 1, &hi)))
+			return -EIO;
+
+		if (likely(speed))
+			*speed = (hi << 8) | lo;
+
+		break;
+
+	default:
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static void fan_watchdog_fire(struct work_struct *ignored)
+{
+	int rc;
+
+	printk(IBM_NOTICE "fan watchdog: enabling fan\n");
+	rc = fan_set_enable();
+	if (rc < 0) {
+		printk(IBM_ERR "fan watchdog: error %d while enabling fan, "
+			"will try again later...\n", -rc);
+		/* reschedule for later */
+		fan_watchdog_reset();
+	}
+}
+
+static void fan_watchdog_reset(void)
+{
+	static int fan_watchdog_active = 0;
+
+	if (fan_control_access_mode == TPACPI_FAN_WR_NONE)
+		return;
+
+	if (fan_watchdog_active)
+		cancel_delayed_work(&fan_watchdog_task);
+
+	if (fan_watchdog_maxinterval > 0) {
+		fan_watchdog_active = 1;
+		if (!schedule_delayed_work(&fan_watchdog_task,
+				msecs_to_jiffies(fan_watchdog_maxinterval
+						 * 1000))) {
+			printk(IBM_ERR "failed to schedule the fan watchdog, "
+			       "watchdog will not trigger\n");
+		}
+	} else
+		fan_watchdog_active = 0;
+}
+
+static int fan_set_level(int level)
+{
+	if (!fan_control_allowed)
+		return -EPERM;
+
+	switch (fan_control_access_mode) {
+	case TPACPI_FAN_WR_ACPI_SFAN:
+		if (level >= 0 && level <= 7) {
+			if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
+				return -EIO;
+		} else
+			return -EINVAL;
+		break;
+
+	case TPACPI_FAN_WR_ACPI_FANS:
+	case TPACPI_FAN_WR_TPEC:
+		if ((level != TP_EC_FAN_AUTO) &&
+		    (level != TP_EC_FAN_FULLSPEED) &&
+		    ((level < 0) || (level > 7)))
+			return -EINVAL;
+
+		/* safety net should the EC not support AUTO
+		 * or FULLSPEED mode bits and just ignore them */
+		if (level & TP_EC_FAN_FULLSPEED)
+			level |= 7;	/* safety min speed 7 */
+		else if (level & TP_EC_FAN_FULLSPEED)
+			level |= 4;	/* safety min speed 4 */
+
+		if (!acpi_ec_write(fan_status_offset, level))
+			return -EIO;
+		else
+			tp_features.fan_ctrl_status_undef = 0;
+		break;
+
+	default:
+		return -ENXIO;
+	}
+	return 0;
+}
+
+static int fan_set_level_safe(int level)
+{
+	int rc;
+
+	if (!fan_control_allowed)
+		return -EPERM;
+
+	rc = mutex_lock_interruptible(&fan_mutex);
+	if (rc < 0)
+		return rc;
+
+	if (level == TPACPI_FAN_LAST_LEVEL)
+		level = fan_control_desired_level;
+
+	rc = fan_set_level(level);
+	if (!rc)
+		fan_update_desired_level(level);
+
+	mutex_unlock(&fan_mutex);
+	return rc;
+}
+
+static int fan_set_enable(void)
+{
+	u8 s;
+	int rc;
+
+	if (!fan_control_allowed)
+		return -EPERM;
+
+	rc = mutex_lock_interruptible(&fan_mutex);
+	if (rc < 0)
+		return rc;
+
+	switch (fan_control_access_mode) {
+	case TPACPI_FAN_WR_ACPI_FANS:
+	case TPACPI_FAN_WR_TPEC:
+		rc = fan_get_status(&s);
+		if (rc < 0)
+			break;
+
+		/* Don't go out of emergency fan mode */
+		if (s != 7) {
+			s &= 0x07;
+			s |= TP_EC_FAN_AUTO | 4; /* min fan speed 4 */
+		}
+
+		if (!acpi_ec_write(fan_status_offset, s))
+			rc = -EIO;
+		else {
+			tp_features.fan_ctrl_status_undef = 0;
+			rc = 0;
+		}
+		break;
+
+	case TPACPI_FAN_WR_ACPI_SFAN:
+		rc = fan_get_status(&s);
+		if (rc < 0)
+			break;
+
+		s &= 0x07;
+
+		/* Set fan to at least level 4 */
+		s |= 4;
+
+		if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s))
+			rc= -EIO;
+		else
+			rc = 0;
+		break;
+
+	default:
+		rc = -ENXIO;
+	}
+
+	mutex_unlock(&fan_mutex);
+	return rc;
+}
+
+static int fan_set_disable(void)
+{
+	int rc;
+
+	if (!fan_control_allowed)
+		return -EPERM;
+
+	rc = mutex_lock_interruptible(&fan_mutex);
+	if (rc < 0)
+		return rc;
+
+	rc = 0;
+	switch (fan_control_access_mode) {
+	case TPACPI_FAN_WR_ACPI_FANS:
+	case TPACPI_FAN_WR_TPEC:
+		if (!acpi_ec_write(fan_status_offset, 0x00))
+			rc = -EIO;
+		else {
+			fan_control_desired_level = 0;
+			tp_features.fan_ctrl_status_undef = 0;
+		}
+		break;
+
+	case TPACPI_FAN_WR_ACPI_SFAN:
+		if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00))
+			rc = -EIO;
+		else
+			fan_control_desired_level = 0;
+		break;
+
+	default:
+		rc = -ENXIO;
+	}
+
+
+	mutex_unlock(&fan_mutex);
+	return rc;
+}
+
+static int fan_set_speed(int speed)
+{
+	int rc;
+
+	if (!fan_control_allowed)
+		return -EPERM;
+
+	rc = mutex_lock_interruptible(&fan_mutex);
+	if (rc < 0)
+		return rc;
+
+	rc = 0;
+	switch (fan_control_access_mode) {
+	case TPACPI_FAN_WR_ACPI_FANS:
+		if (speed >= 0 && speed <= 65535) {
+			if (!acpi_evalf(fans_handle, NULL, NULL, "vddd",
+					speed, speed, speed))
+				rc = -EIO;
+		} else
+			rc = -EINVAL;
+		break;
+
+	default:
+		rc = -ENXIO;
+	}
+
+	mutex_unlock(&fan_mutex);
+	return rc;
+}
+
+static int fan_read(char *p)
+{
+	int len = 0;
+	int rc;
+	u8 status;
+	unsigned int speed = 0;
+
+	switch (fan_status_access_mode) {
+	case TPACPI_FAN_RD_ACPI_GFAN:
+		/* 570, 600e/x, 770e, 770x */
+		if ((rc = fan_get_status_safe(&status)) < 0)
+			return rc;
+
+		len += sprintf(p + len, "status:\t\t%s\n"
+			       "level:\t\t%d\n",
+			       (status != 0) ? "enabled" : "disabled", status);
+		break;
+
+	case TPACPI_FAN_RD_TPEC:
+		/* all except 570, 600e/x, 770e, 770x */
+		if ((rc = fan_get_status_safe(&status)) < 0)
+			return rc;
+
+		if (unlikely(tp_features.fan_ctrl_status_undef)) {
+			if (status != fan_control_initial_status)
+				tp_features.fan_ctrl_status_undef = 0;
+			else
+				/* Return most likely status. In fact, it
+				 * might be the only possible status */
+				status = TP_EC_FAN_AUTO;
+		}
+
+		len += sprintf(p + len, "status:\t\t%s\n",
+			       (status != 0) ? "enabled" : "disabled");
+
+		if ((rc = fan_get_speed(&speed)) < 0)
+			return rc;
+
+		len += sprintf(p + len, "speed:\t\t%d\n", speed);
+
+		if (status & TP_EC_FAN_FULLSPEED)
+			/* Disengaged mode takes precedence */
+			len += sprintf(p + len, "level:\t\tdisengaged\n");
+		else if (status & TP_EC_FAN_AUTO)
+			len += sprintf(p + len, "level:\t\tauto\n");
+		else
+			len += sprintf(p + len, "level:\t\t%d\n", status);
+		break;
+
+	case TPACPI_FAN_NONE:
+	default:
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+	}
+
+	if (fan_control_commands & TPACPI_FAN_CMD_LEVEL) {
+		len += sprintf(p + len, "commands:\tlevel <level>");
+
+		switch (fan_control_access_mode) {
+		case TPACPI_FAN_WR_ACPI_SFAN:
+			len += sprintf(p + len, " (<level> is 0-7)\n");
+			break;
+
+		default:
+			len += sprintf(p + len, " (<level> is 0-7, "
+				       "auto, disengaged, full-speed)\n");
+			break;
+		}
+	}
+
+	if (fan_control_commands & TPACPI_FAN_CMD_ENABLE)
+		len += sprintf(p + len, "commands:\tenable, disable\n"
+			       "commands:\twatchdog <timeout> (<timeout> is 0 (off), "
+			       "1-120 (seconds))\n");
+
+	if (fan_control_commands & TPACPI_FAN_CMD_SPEED)
+		len += sprintf(p + len, "commands:\tspeed <speed>"
+			       " (<speed> is 0-65535)\n");
+
+	return len;
+}
+
+static int fan_write_cmd_level(const char *cmd, int *rc)
+{
+	int level;
+
+	if (strlencmp(cmd, "level auto") == 0)
+		level = TP_EC_FAN_AUTO;
+	else if ((strlencmp(cmd, "level disengaged") == 0) |
+	         (strlencmp(cmd, "level full-speed") == 0))
+		level = TP_EC_FAN_FULLSPEED;
+	else if (sscanf(cmd, "level %d", &level) != 1)
+		return 0;
+
+	if ((*rc = fan_set_level_safe(level)) == -ENXIO)
+		printk(IBM_ERR "level command accepted for unsupported "
+		       "access mode %d", fan_control_access_mode);
+
+	return 1;
+}
+
+static int fan_write_cmd_enable(const char *cmd, int *rc)
+{
+	if (strlencmp(cmd, "enable") != 0)
+		return 0;
+
+	if ((*rc = fan_set_enable()) == -ENXIO)
+		printk(IBM_ERR "enable command accepted for unsupported "
+		       "access mode %d", fan_control_access_mode);
+
+	return 1;
+}
+
+static int fan_write_cmd_disable(const char *cmd, int *rc)
+{
+	if (strlencmp(cmd, "disable") != 0)
+		return 0;
+
+	if ((*rc = fan_set_disable()) == -ENXIO)
+		printk(IBM_ERR "disable command accepted for unsupported "
+		       "access mode %d", fan_control_access_mode);
+
+	return 1;
+}
+
+static int fan_write_cmd_speed(const char *cmd, int *rc)
+{
+	int speed;
+
+	/* TODO:
+	 * Support speed <low> <medium> <high> ? */
+
+	if (sscanf(cmd, "speed %d", &speed) != 1)
+		return 0;
+
+	if ((*rc = fan_set_speed(speed)) == -ENXIO)
+		printk(IBM_ERR "speed command accepted for unsupported "
+		       "access mode %d", fan_control_access_mode);
+
+	return 1;
+}
+
+static int fan_write_cmd_watchdog(const char *cmd, int *rc)
+{
+	int interval;
+
+	if (sscanf(cmd, "watchdog %d", &interval) != 1)
+		return 0;
+
+	if (interval < 0 || interval > 120)
+		*rc = -EINVAL;
+	else
+		fan_watchdog_maxinterval = interval;
+
+	return 1;
+}
+
+static int fan_write(char *buf)
+{
+	char *cmd;
+	int rc = 0;
+
+	while (!rc && (cmd = next_cmd(&buf))) {
+		if (!((fan_control_commands & TPACPI_FAN_CMD_LEVEL) &&
+		      fan_write_cmd_level(cmd, &rc)) &&
+		    !((fan_control_commands & TPACPI_FAN_CMD_ENABLE) &&
+		      (fan_write_cmd_enable(cmd, &rc) ||
+		       fan_write_cmd_disable(cmd, &rc) ||
+		       fan_write_cmd_watchdog(cmd, &rc))) &&
+		    !((fan_control_commands & TPACPI_FAN_CMD_SPEED) &&
+		      fan_write_cmd_speed(cmd, &rc))
+		    )
+			rc = -EINVAL;
+		else if (!rc)
+			fan_watchdog_reset();
+	}
+
+	return rc;
+}
+
+static struct ibm_struct fan_driver_data = {
+	.name = "fan",
+	.read = fan_read,
+	.write = fan_write,
+	.exit = fan_exit,
+};
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Infrastructure
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+/* /proc support */
+static struct proc_dir_entry *proc_dir = NULL;
+
+/* Subdriver registry */
+static LIST_HEAD(tpacpi_all_drivers);
+
+
+/*
+ * Module and infrastructure proble, init and exit handling
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUG
+static const char * __init str_supported(int is_supported)
+{
+	static char text_unsupported[] __initdata = "not supported";
+
+	return (is_supported)? &text_unsupported[4] : &text_unsupported[0];
+}
+#endif /* CONFIG_THINKPAD_ACPI_DEBUG */
+
+static int __init ibm_init(struct ibm_init_struct *iibm)
+{
+	int ret;
+	struct ibm_struct *ibm = iibm->data;
+	struct proc_dir_entry *entry;
+
+	BUG_ON(ibm == NULL);
+
+	INIT_LIST_HEAD(&ibm->all_drivers);
+
+	if (ibm->flags.experimental && !experimental)
+		return 0;
+
+	dbg_printk(TPACPI_DBG_INIT,
+		"probing for %s\n", ibm->name);
+
+	if (iibm->init) {
+		ret = iibm->init(iibm);
+		if (ret > 0)
+			return 0;	/* probe failed */
+		if (ret)
+			return ret;
+
+		ibm->flags.init_called = 1;
+	}
+
+	if (ibm->acpi) {
+		if (ibm->acpi->hid) {
+			ret = register_tpacpi_subdriver(ibm);
+			if (ret)
+				goto err_out;
+		}
+
+		if (ibm->acpi->notify) {
+			ret = setup_acpi_notify(ibm);
+			if (ret == -ENODEV) {
+				printk(IBM_NOTICE "disabling subdriver %s\n",
+					ibm->name);
+				ret = 0;
+				goto err_out;
+			}
+			if (ret < 0)
+				goto err_out;
+		}
+	}
+
+	dbg_printk(TPACPI_DBG_INIT,
+		"%s installed\n", ibm->name);
+
+	if (ibm->read) {
+		entry = create_proc_entry(ibm->name,
+					  S_IFREG | S_IRUGO | S_IWUSR,
+					  proc_dir);
+		if (!entry) {
+			printk(IBM_ERR "unable to create proc entry %s\n",
+			       ibm->name);
+			ret = -ENODEV;
+			goto err_out;
+		}
+		entry->owner = THIS_MODULE;
+		entry->data = ibm;
+		entry->read_proc = &dispatch_procfs_read;
+		if (ibm->write)
+			entry->write_proc = &dispatch_procfs_write;
+		ibm->flags.proc_created = 1;
+	}
+
+	list_add_tail(&ibm->all_drivers, &tpacpi_all_drivers);
+
+	return 0;
+
+err_out:
+	dbg_printk(TPACPI_DBG_INIT,
+		"%s: at error exit path with result %d\n",
+		ibm->name, ret);
+
+	ibm_exit(ibm);
+	return (ret < 0)? ret : 0;
+}
+
+static void ibm_exit(struct ibm_struct *ibm)
+{
+	dbg_printk(TPACPI_DBG_EXIT, "removing %s\n", ibm->name);
+
+	list_del_init(&ibm->all_drivers);
+
+	if (ibm->flags.acpi_notify_installed) {
+		dbg_printk(TPACPI_DBG_EXIT,
+			"%s: acpi_remove_notify_handler\n", ibm->name);
+		BUG_ON(!ibm->acpi);
+		acpi_remove_notify_handler(*ibm->acpi->handle,
+					   ibm->acpi->type,
+					   dispatch_acpi_notify);
+		ibm->flags.acpi_notify_installed = 0;
+		ibm->flags.acpi_notify_installed = 0;
+	}
+
+	if (ibm->flags.proc_created) {
+		dbg_printk(TPACPI_DBG_EXIT,
+			"%s: remove_proc_entry\n", ibm->name);
+		remove_proc_entry(ibm->name, proc_dir);
+		ibm->flags.proc_created = 0;
+	}
+
+	if (ibm->flags.acpi_driver_registered) {
+		dbg_printk(TPACPI_DBG_EXIT,
+			"%s: acpi_bus_unregister_driver\n", ibm->name);
+		BUG_ON(!ibm->acpi);
+		acpi_bus_unregister_driver(ibm->acpi->driver);
+		kfree(ibm->acpi->driver);
+		ibm->acpi->driver = NULL;
+		ibm->flags.acpi_driver_registered = 0;
+	}
+
+	if (ibm->flags.init_called && ibm->exit) {
+		ibm->exit();
+		ibm->flags.init_called = 0;
+	}
+
+	dbg_printk(TPACPI_DBG_INIT, "finished removing %s\n", ibm->name);
+}
+
+/* Probing */
+
+static char *ibm_thinkpad_ec_found = NULL;
+
+static char* __init check_dmi_for_ec(void)
+{
+	struct dmi_device *dev = NULL;
+	char ec_fw_string[18];
+
+	/*
+	 * ThinkPad T23 or newer, A31 or newer, R50e or newer,
+	 * X32 or newer, all Z series;  Some models must have an
+	 * up-to-date BIOS or they will not be detected.
+	 *
+	 * See http://thinkwiki.org/wiki/List_of_DMI_IDs
+	 */
+	while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) {
+		if (sscanf(dev->name,
+			   "IBM ThinkPad Embedded Controller -[%17c",
+			   ec_fw_string) == 1) {
+			ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
+			ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
+			return kstrdup(ec_fw_string, GFP_KERNEL);
+		}
+	}
+	return NULL;
+}
+
+static int __init probe_for_thinkpad(void)
+{
+	int is_thinkpad;
+
+	if (acpi_disabled)
+		return -ENODEV;
+
+	/*
+	 * Non-ancient models have better DMI tagging, but very old models
+	 * don't.
+	 */
+	is_thinkpad = dmi_name_in_vendors("ThinkPad");
+
+	/* ec is required because many other handles are relative to it */
+	IBM_ACPIHANDLE_INIT(ec);
+	if (!ec_handle) {
+		if (is_thinkpad)
+			printk(IBM_ERR
+				"Not yet supported ThinkPad detected!\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Risks a regression on very old machines, but reduces potential
+	 * false positives a damn great deal
+	 */
+	if (!is_thinkpad)
+		is_thinkpad = dmi_name_in_vendors("IBM");
+
+	if (!is_thinkpad && !force_load)
+		return -ENODEV;
+
+	return 0;
+}
+
+
+/* Module init, exit, parameters */
+
+static struct ibm_init_struct ibms_init[] __initdata = {
+	{
+		.init = thinkpad_acpi_driver_init,
+		.data = &thinkpad_acpi_driver_data,
+	},
+	{
+		.init = hotkey_init,
+		.data = &hotkey_driver_data,
+	},
+	{
+		.init = bluetooth_init,
+		.data = &bluetooth_driver_data,
+	},
+	{
+		.init = wan_init,
+		.data = &wan_driver_data,
+	},
+	{
+		.init = video_init,
+		.data = &video_driver_data,
+	},
+	{
+		.init = light_init,
+		.data = &light_driver_data,
+	},
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+	{
+		.init = dock_init,
+		.data = &dock_driver_data[0],
+	},
+	{
+		.init = dock_init2,
+		.data = &dock_driver_data[1],
+	},
+#endif
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+	{
+		.init = bay_init,
+		.data = &bay_driver_data,
+	},
+#endif
+	{
+		.init = cmos_init,
+		.data = &cmos_driver_data,
+	},
+	{
+		.init = led_init,
+		.data = &led_driver_data,
+	},
+	{
+		.init = beep_init,
+		.data = &beep_driver_data,
+	},
+	{
+		.init = thermal_init,
+		.data = &thermal_driver_data,
+	},
+	{
+		.data = &ecdump_driver_data,
+	},
+	{
+		.init = brightness_init,
+		.data = &brightness_driver_data,
+	},
+	{
+		.data = &volume_driver_data,
+	},
+	{
+		.init = fan_init,
+		.data = &fan_driver_data,
+	},
+};
+
+static int __init set_ibm_param(const char *val, struct kernel_param *kp)
+{
+	unsigned int i;
+	struct ibm_struct *ibm;
+
+	for (i = 0; i < ARRAY_SIZE(ibms_init); i++) {
+		ibm = ibms_init[i].data;
+		BUG_ON(ibm == NULL);
+
+		if (strcmp(ibm->name, kp->name) == 0 && ibm->write) {
+			if (strlen(val) > sizeof(ibms_init[i].param) - 2)
+				return -ENOSPC;
+			strcpy(ibms_init[i].param, val);
+			strcat(ibms_init[i].param, ",");
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int experimental;
+module_param(experimental, int, 0);
+
+static u32 dbg_level;
+module_param_named(debug, dbg_level, uint, 0);
+
+static int force_load;
+module_param(force_load, int, 0);
+
+static int fan_control_allowed;
+module_param_named(fan_control, fan_control_allowed, int, 0);
+
+#define IBM_PARAM(feature) \
+	module_param_call(feature, set_ibm_param, NULL, NULL, 0)
+
+IBM_PARAM(hotkey);
+IBM_PARAM(bluetooth);
+IBM_PARAM(video);
+IBM_PARAM(light);
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+IBM_PARAM(dock);
+#endif
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+IBM_PARAM(bay);
+#endif /* CONFIG_THINKPAD_ACPI_BAY */
+IBM_PARAM(cmos);
+IBM_PARAM(led);
+IBM_PARAM(beep);
+IBM_PARAM(ecdump);
+IBM_PARAM(brightness);
+IBM_PARAM(volume);
+IBM_PARAM(fan);
+
+static int __init thinkpad_acpi_module_init(void)
+{
+	int ret, i;
+
+	/* Driver-level probe */
+	ret = probe_for_thinkpad();
+	if (ret)
+		return ret;
+
+	/* Driver initialization */
+	ibm_thinkpad_ec_found = check_dmi_for_ec();
+	IBM_ACPIHANDLE_INIT(ecrd);
+	IBM_ACPIHANDLE_INIT(ecwr);
+
+	proc_dir = proc_mkdir(IBM_PROC_DIR, acpi_root_dir);
+	if (!proc_dir) {
+		printk(IBM_ERR "unable to create proc dir " IBM_PROC_DIR);
+		thinkpad_acpi_module_exit();
+		return -ENODEV;
+	}
+	proc_dir->owner = THIS_MODULE;
+
+	ret = platform_driver_register(&tpacpi_pdriver);
+	if (ret) {
+		printk(IBM_ERR "unable to register platform driver\n");
+		thinkpad_acpi_module_exit();
+		return ret;
+	}
+	ret = tpacpi_create_driver_attributes(&tpacpi_pdriver.driver);
+	if (ret) {
+		printk(IBM_ERR "unable to create sysfs driver attributes\n");
+		thinkpad_acpi_module_exit();
+		return ret;
+	}
+
+
+	/* Device initialization */
+	tpacpi_pdev = platform_device_register_simple(IBM_DRVR_NAME, -1,
+							NULL, 0);
+	if (IS_ERR(tpacpi_pdev)) {
+		ret = PTR_ERR(tpacpi_pdev);
+		tpacpi_pdev = NULL;
+		printk(IBM_ERR "unable to register platform device\n");
+		thinkpad_acpi_module_exit();
+		return ret;
+	}
+	tpacpi_hwmon = hwmon_device_register(&tpacpi_pdev->dev);
+	if (IS_ERR(tpacpi_hwmon)) {
+		ret = PTR_ERR(tpacpi_hwmon);
+		tpacpi_hwmon = NULL;
+		printk(IBM_ERR "unable to register hwmon device\n");
+		thinkpad_acpi_module_exit();
+		return ret;
+	}
+	for (i = 0; i < ARRAY_SIZE(ibms_init); i++) {
+		ret = ibm_init(&ibms_init[i]);
+		if (ret >= 0 && *ibms_init[i].param)
+			ret = ibms_init[i].data->write(ibms_init[i].param);
+		if (ret < 0) {
+			thinkpad_acpi_module_exit();
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static void thinkpad_acpi_module_exit(void)
+{
+	struct ibm_struct *ibm, *itmp;
+
+	list_for_each_entry_safe_reverse(ibm, itmp,
+					 &tpacpi_all_drivers,
+					 all_drivers) {
+		ibm_exit(ibm);
+	}
+
+	dbg_printk(TPACPI_DBG_INIT, "finished subdriver exit path...\n");
+
+	if (tpacpi_hwmon)
+		hwmon_device_unregister(tpacpi_hwmon);
+
+	if (tpacpi_pdev)
+		platform_device_unregister(tpacpi_pdev);
+
+	tpacpi_remove_driver_attributes(&tpacpi_pdriver.driver);
+	platform_driver_unregister(&tpacpi_pdriver);
+
+	if (proc_dir)
+		remove_proc_entry(IBM_PROC_DIR, acpi_root_dir);
+
+	kfree(ibm_thinkpad_ec_found);
+}
+
+module_init(thinkpad_acpi_module_init);
+module_exit(thinkpad_acpi_module_exit);
diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h
new file mode 100644
index 0000000..440145a
--- /dev/null
+++ b/drivers/misc/thinkpad_acpi.h
@@ -0,0 +1,572 @@
+/*
+ *  thinkpad_acpi.h - ThinkPad ACPI Extras
+ *
+ *
+ *  Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
+ *  Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#ifndef __THINKPAD_ACPI_H__
+#define __THINKPAD_ACPI_H__
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysfs.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <asm/uaccess.h>
+
+#include <linux/dmi.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+
+#include <acpi/acpi_drivers.h>
+#include <acpi/acnamesp.h>
+
+
+/****************************************************************************
+ * Main driver
+ */
+
+#define IBM_NAME "thinkpad"
+#define IBM_DESC "ThinkPad ACPI Extras"
+#define IBM_FILE "thinkpad_acpi"
+#define IBM_URL "http://ibm-acpi.sf.net/"
+#define IBM_MAIL "ibm-acpi-devel@lists.sourceforge.net"
+
+#define IBM_PROC_DIR "ibm"
+#define IBM_ACPI_EVENT_PREFIX "ibm"
+#define IBM_DRVR_NAME IBM_FILE
+
+#define IBM_LOG IBM_FILE ": "
+#define IBM_ERR	   KERN_ERR    IBM_LOG
+#define IBM_NOTICE KERN_NOTICE IBM_LOG
+#define IBM_INFO   KERN_INFO   IBM_LOG
+#define IBM_DEBUG  KERN_DEBUG  IBM_LOG
+
+#define IBM_MAX_ACPI_ARGS 3
+
+/* ThinkPad CMOS commands */
+#define TP_CMOS_VOLUME_DOWN	0
+#define TP_CMOS_VOLUME_UP	1
+#define TP_CMOS_VOLUME_MUTE	2
+#define TP_CMOS_BRIGHTNESS_UP	4
+#define TP_CMOS_BRIGHTNESS_DOWN	5
+
+#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
+#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
+#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
+
+/* Debugging */
+#define TPACPI_DBG_ALL		0xffff
+#define TPACPI_DBG_ALL		0xffff
+#define TPACPI_DBG_INIT		0x0001
+#define TPACPI_DBG_EXIT		0x0002
+#define dbg_printk(a_dbg_level, format, arg...) \
+	do { if (dbg_level & a_dbg_level) \
+		printk(IBM_DEBUG "%s: " format, __func__ , ## arg); } while (0)
+#ifdef CONFIG_THINKPAD_ACPI_DEBUG
+#define vdbg_printk(a_dbg_level, format, arg...) \
+	dbg_printk(a_dbg_level, format, ## arg)
+static const char *str_supported(int is_supported);
+#else
+#define vdbg_printk(a_dbg_level, format, arg...)
+#endif
+
+/* ACPI HIDs */
+#define IBM_HKEY_HID    "IBM0068"
+#define IBM_PCI_HID     "PNP0A03"
+
+/* ACPI helpers */
+static int __must_check acpi_evalf(acpi_handle handle,
+		      void *res, char *method, char *fmt, ...);
+static int __must_check acpi_ec_read(int i, u8 * p);
+static int __must_check acpi_ec_write(int i, u8 v);
+static int __must_check _sta(acpi_handle handle);
+
+/* ACPI handles */
+static acpi_handle root_handle;			/* root namespace */
+static acpi_handle ec_handle;			/* EC */
+static acpi_handle ecrd_handle, ecwr_handle;	/* 570 EC access */
+static acpi_handle cmos_handle, hkey_handle;	/* basic thinkpad handles */
+
+static void drv_acpi_handle_init(char *name,
+		   acpi_handle *handle, acpi_handle parent,
+		   char **paths, int num_paths, char **path);
+#define IBM_ACPIHANDLE_INIT(object)						\
+	drv_acpi_handle_init(#object, &object##_handle, *object##_parent,	\
+		object##_paths, ARRAY_SIZE(object##_paths), &object##_path)
+
+/* ThinkPad ACPI helpers */
+static int issue_thinkpad_cmos_command(int cmos_cmd);
+
+/* procfs support */
+static struct proc_dir_entry *proc_dir;
+
+/* procfs helpers */
+static int dispatch_procfs_read(char *page, char **start, off_t off,
+		int count, int *eof, void *data);
+static int dispatch_procfs_write(struct file *file,
+		const char __user * userbuf,
+		unsigned long count, void *data);
+static char *next_cmd(char **cmds);
+
+/* sysfs support */
+struct attribute_set {
+	unsigned int members, max_members;
+	struct attribute_group group;
+};
+
+static struct attribute_set *create_attr_set(unsigned int max_members,
+						const char* name);
+#define destroy_attr_set(_set) \
+	kfree(_set);
+static int add_to_attr_set(struct attribute_set* s, struct attribute *attr);
+static int add_many_to_attr_set(struct attribute_set* s,
+			struct attribute **attr,
+			unsigned int count);
+#define register_attr_set_with_sysfs(_attr_set, _kobj) \
+	sysfs_create_group(_kobj, &_attr_set->group)
+static void delete_attr_set(struct attribute_set* s, struct kobject *kobj);
+
+static int parse_strtoul(const char *buf, unsigned long max,
+			unsigned long *value);
+
+/* Device model */
+static struct platform_device *tpacpi_pdev;
+static struct class_device *tpacpi_hwmon;
+static struct platform_driver tpacpi_pdriver;
+static int tpacpi_create_driver_attributes(struct device_driver *drv);
+static void tpacpi_remove_driver_attributes(struct device_driver *drv);
+
+/* Module */
+static int experimental;
+static u32 dbg_level;
+static int force_load;
+static char *ibm_thinkpad_ec_found;
+
+static char* check_dmi_for_ec(void);
+static int thinkpad_acpi_module_init(void);
+static void thinkpad_acpi_module_exit(void);
+
+
+/****************************************************************************
+ * Subdrivers
+ */
+
+struct ibm_struct;
+
+struct tp_acpi_drv_struct {
+	char *hid;
+	struct acpi_driver *driver;
+
+	void (*notify) (struct ibm_struct *, u32);
+	acpi_handle *handle;
+	u32 type;
+	struct acpi_device *device;
+};
+
+struct ibm_struct {
+	char *name;
+
+	int (*read) (char *);
+	int (*write) (char *);
+	void (*exit) (void);
+
+	struct list_head all_drivers;
+
+	struct tp_acpi_drv_struct *acpi;
+
+	struct {
+		u8 acpi_driver_registered:1;
+		u8 acpi_notify_installed:1;
+		u8 proc_created:1;
+		u8 init_called:1;
+		u8 experimental:1;
+	} flags;
+};
+
+struct ibm_init_struct {
+	char param[32];
+
+	int (*init) (struct ibm_init_struct *);
+	struct ibm_struct *data;
+};
+
+static struct {
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+	u16 bay_status:1;
+	u16 bay_eject:1;
+	u16 bay_status2:1;
+	u16 bay_eject2:1;
+#endif
+	u16 bluetooth:1;
+	u16 hotkey:1;
+	u16 hotkey_mask:1;
+	u16 light:1;
+	u16 light_status:1;
+	u16 wan:1;
+	u16 fan_ctrl_status_undef:1;
+} tp_features;
+
+static struct list_head tpacpi_all_drivers;
+
+static struct ibm_init_struct ibms_init[];
+static int set_ibm_param(const char *val, struct kernel_param *kp);
+static int ibm_init(struct ibm_init_struct *iibm);
+static void ibm_exit(struct ibm_struct *ibm);
+
+
+/*
+ * procfs master subdriver
+ */
+static int thinkpad_acpi_driver_init(struct ibm_init_struct *iibm);
+static int thinkpad_acpi_driver_read(char *p);
+
+
+/*
+ * Bay subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+static acpi_handle bay_handle, bay_ej_handle;
+static acpi_handle bay2_handle, bay2_ej_handle;
+
+static int bay_init(struct ibm_init_struct *iibm);
+static void bay_notify(struct ibm_struct *ibm, u32 event);
+static int bay_read(char *p);
+static int bay_write(char *buf);
+#endif /* CONFIG_THINKPAD_ACPI_BAY */
+
+
+/*
+ * Beep subdriver
+ */
+
+static acpi_handle beep_handle;
+
+static int beep_read(char *p);
+static int beep_write(char *buf);
+
+
+/*
+ * Bluetooth subdriver
+ */
+
+#define TPACPI_BLUETH_SYSFS_GROUP "bluetooth"
+
+enum {
+	/* ACPI GBDC/SBDC bits */
+	TP_ACPI_BLUETOOTH_HWPRESENT	= 0x01,	/* Bluetooth hw available */
+	TP_ACPI_BLUETOOTH_RADIOSSW	= 0x02,	/* Bluetooth radio enabled */
+	TP_ACPI_BLUETOOTH_UNK		= 0x04,	/* unknown function */
+};
+
+static int bluetooth_init(struct ibm_init_struct *iibm);
+static int bluetooth_get_radiosw(void);
+static int bluetooth_set_radiosw(int radio_on);
+static int bluetooth_read(char *p);
+static int bluetooth_write(char *buf);
+
+
+/*
+ * Brightness (backlight) subdriver
+ */
+
+#define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen"
+
+static struct backlight_device *ibm_backlight_device;
+static int brightness_offset = 0x31;
+
+static int brightness_init(struct ibm_init_struct *iibm);
+static void brightness_exit(void);
+static int brightness_get(struct backlight_device *bd);
+static int brightness_set(int value);
+static int brightness_update_status(struct backlight_device *bd);
+static int brightness_read(char *p);
+static int brightness_write(char *buf);
+
+
+/*
+ * CMOS subdriver
+ */
+
+static int cmos_read(char *p);
+static int cmos_write(char *buf);
+
+
+/*
+ * Dock subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+static acpi_handle pci_handle;
+static acpi_handle dock_handle;
+
+static void dock_notify(struct ibm_struct *ibm, u32 event);
+static int dock_read(char *p);
+static int dock_write(char *buf);
+#endif /* CONFIG_THINKPAD_ACPI_DOCK */
+
+
+/*
+ * EC dump subdriver
+ */
+
+static int ecdump_read(char *p) ;
+static int ecdump_write(char *buf);
+
+
+/*
+ * Fan subdriver
+ */
+
+enum {					/* Fan control constants */
+	fan_status_offset = 0x2f,	/* EC register 0x2f */
+	fan_rpm_offset = 0x84,		/* EC register 0x84: LSB, 0x85 MSB (RPM)
+					 * 0x84 must be read before 0x85 */
+
+	TP_EC_FAN_FULLSPEED = 0x40,	/* EC fan mode: full speed */
+	TP_EC_FAN_AUTO	    = 0x80,	/* EC fan mode: auto fan control */
+
+	TPACPI_FAN_LAST_LEVEL = 0x100,	/* Use cached last-seen fan level */
+};
+
+enum fan_status_access_mode {
+	TPACPI_FAN_NONE = 0,		/* No fan status or control */
+	TPACPI_FAN_RD_ACPI_GFAN,	/* Use ACPI GFAN */
+	TPACPI_FAN_RD_TPEC,		/* Use ACPI EC regs 0x2f, 0x84-0x85 */
+};
+
+enum fan_control_access_mode {
+	TPACPI_FAN_WR_NONE = 0,		/* No fan control */
+	TPACPI_FAN_WR_ACPI_SFAN,	/* Use ACPI SFAN */
+	TPACPI_FAN_WR_TPEC,		/* Use ACPI EC reg 0x2f */
+	TPACPI_FAN_WR_ACPI_FANS,	/* Use ACPI FANS and EC reg 0x2f */
+};
+
+enum fan_control_commands {
+	TPACPI_FAN_CMD_SPEED 	= 0x0001,	/* speed command */
+	TPACPI_FAN_CMD_LEVEL 	= 0x0002,	/* level command  */
+	TPACPI_FAN_CMD_ENABLE	= 0x0004,	/* enable/disable cmd,
+						 * and also watchdog cmd */
+};
+
+static int fan_control_allowed;
+
+static enum fan_status_access_mode fan_status_access_mode;
+static enum fan_control_access_mode fan_control_access_mode;
+static enum fan_control_commands fan_control_commands;
+static u8 fan_control_initial_status;
+static u8 fan_control_desired_level;
+static int fan_watchdog_maxinterval;
+
+static struct mutex fan_mutex;
+
+static acpi_handle fans_handle, gfan_handle, sfan_handle;
+
+static int fan_init(struct ibm_init_struct *iibm);
+static void fan_exit(void);
+static int fan_get_status(u8 *status);
+static int fan_get_status_safe(u8 *status);
+static int fan_get_speed(unsigned int *speed);
+static void fan_update_desired_level(u8 status);
+static void fan_watchdog_fire(struct work_struct *ignored);
+static void fan_watchdog_reset(void);
+static int fan_set_level(int level);
+static int fan_set_level_safe(int level);
+static int fan_set_enable(void);
+static int fan_set_disable(void);
+static int fan_set_speed(int speed);
+static int fan_read(char *p);
+static int fan_write(char *buf);
+static int fan_write_cmd_level(const char *cmd, int *rc);
+static int fan_write_cmd_enable(const char *cmd, int *rc);
+static int fan_write_cmd_disable(const char *cmd, int *rc);
+static int fan_write_cmd_speed(const char *cmd, int *rc);
+static int fan_write_cmd_watchdog(const char *cmd, int *rc);
+
+
+/*
+ * Hotkey subdriver
+ */
+
+#define TPACPI_HOTKEY_SYSFS_GROUP "hotkey"
+
+static int hotkey_orig_status;
+static int hotkey_orig_mask;
+
+static struct mutex hotkey_mutex;
+
+static int hotkey_init(struct ibm_init_struct *iibm);
+static void hotkey_exit(void);
+static int hotkey_get(int *status, int *mask);
+static int hotkey_set(int status, int mask);
+static void hotkey_notify(struct ibm_struct *ibm, u32 event);
+static int hotkey_read(char *p);
+static int hotkey_write(char *buf);
+
+
+/*
+ * LED subdriver
+ */
+
+enum led_access_mode {
+	TPACPI_LED_NONE = 0,
+	TPACPI_LED_570,	/* 570 */
+	TPACPI_LED_OLD,	/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
+	TPACPI_LED_NEW,	/* all others */
+};
+
+enum {	/* For TPACPI_LED_OLD */
+	TPACPI_LED_EC_HLCL = 0x0c,	/* EC reg to get led to power on */
+	TPACPI_LED_EC_HLBL = 0x0d,	/* EC reg to blink a lit led */
+	TPACPI_LED_EC_HLMS = 0x0e,	/* EC reg to select led to command */
+};
+
+static enum led_access_mode led_supported;
+static acpi_handle led_handle;
+
+static int led_init(struct ibm_init_struct *iibm);
+static int led_read(char *p);
+static int led_write(char *buf);
+
+/*
+ * Light (thinklight) subdriver
+ */
+
+static acpi_handle lght_handle, ledb_handle;
+
+static int light_init(struct ibm_init_struct *iibm);
+static int light_read(char *p);
+static int light_write(char *buf);
+
+
+/*
+ * Thermal subdriver
+ */
+
+enum thermal_access_mode {
+	TPACPI_THERMAL_NONE = 0,	/* No thermal support */
+	TPACPI_THERMAL_ACPI_TMP07,	/* Use ACPI TMP0-7 */
+	TPACPI_THERMAL_ACPI_UPDT,	/* Use ACPI TMP0-7 with UPDT */
+	TPACPI_THERMAL_TPEC_8,		/* Use ACPI EC regs, 8 sensors */
+	TPACPI_THERMAL_TPEC_16,		/* Use ACPI EC regs, 16 sensors */
+};
+
+enum { /* TPACPI_THERMAL_TPEC_* */
+	TP_EC_THERMAL_TMP0 = 0x78,	/* ACPI EC regs TMP 0..7 */
+	TP_EC_THERMAL_TMP8 = 0xC0,	/* ACPI EC regs TMP 8..15 */
+	TP_EC_THERMAL_TMP_NA = -128,	/* ACPI EC sensor not available */
+};
+
+#define TPACPI_MAX_THERMAL_SENSORS 16	/* Max thermal sensors supported */
+struct ibm_thermal_sensors_struct {
+	s32 temp[TPACPI_MAX_THERMAL_SENSORS];
+};
+
+static enum thermal_access_mode thermal_read_mode;
+
+static int thermal_init(struct ibm_init_struct *iibm);
+static int thermal_get_sensor(int idx, s32 *value);
+static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s);
+static int thermal_read(char *p);
+
+
+/*
+ * Video subdriver
+ */
+
+enum video_access_mode {
+	TPACPI_VIDEO_NONE = 0,
+	TPACPI_VIDEO_570,	/* 570 */
+	TPACPI_VIDEO_770,	/* 600e/x, 770e, 770x */
+	TPACPI_VIDEO_NEW,	/* all others */
+};
+
+enum {	/* video status flags, based on VIDEO_570 */
+	TP_ACPI_VIDEO_S_LCD = 0x01,	/* LCD output enabled */
+	TP_ACPI_VIDEO_S_CRT = 0x02,	/* CRT output enabled */
+	TP_ACPI_VIDEO_S_DVI = 0x08,	/* DVI output enabled */
+};
+
+enum {  /* TPACPI_VIDEO_570 constants */
+	TP_ACPI_VIDEO_570_PHSCMD = 0x87,	/* unknown magic constant :( */
+	TP_ACPI_VIDEO_570_PHSMASK = 0x03,	/* PHS bits that map to
+						 * video_status_flags */
+	TP_ACPI_VIDEO_570_PHS2CMD = 0x8b,	/* unknown magic constant :( */
+	TP_ACPI_VIDEO_570_PHS2SET = 0x80,	/* unknown magic constant :( */
+};
+
+static enum video_access_mode video_supported;
+static int video_orig_autosw;
+static acpi_handle vid_handle, vid2_handle;
+
+static int video_init(struct ibm_init_struct *iibm);
+static void video_exit(void);
+static int video_outputsw_get(void);
+static int video_outputsw_set(int status);
+static int video_autosw_get(void);
+static int video_autosw_set(int enable);
+static int video_outputsw_cycle(void);
+static int video_expand_toggle(void);
+static int video_read(char *p);
+static int video_write(char *buf);
+
+
+/*
+ * Volume subdriver
+ */
+
+static int volume_offset = 0x30;
+
+static int volume_read(char *p);
+static int volume_write(char *buf);
+
+
+/*
+ * Wan subdriver
+ */
+
+#define TPACPI_WAN_SYSFS_GROUP "wwan"
+
+enum {
+	/* ACPI GWAN/SWAN bits */
+	TP_ACPI_WANCARD_HWPRESENT	= 0x01,	/* Wan hw available */
+	TP_ACPI_WANCARD_RADIOSSW	= 0x02,	/* Wan radio enabled */
+	TP_ACPI_WANCARD_UNK		= 0x04,	/* unknown function */
+};
+
+static int wan_init(struct ibm_init_struct *iibm);
+static int wan_get_radiosw(void);
+static int wan_set_radiosw(int radio_on);
+static int wan_read(char *p);
+static int wan_write(char *buf);
+
+
+#endif /* __THINKPAD_ACPI_H */