Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: driver specific updates" from Arnd Bergmann:
 "These are all specific to some driver.  They are typically the
  platform side of a change in the drivers directory, such as adding a
  new driver or extending the interface to the platform.  In cases where
  there is no maintainer for the driver, or the maintainer prefers to
  have the platform changes in the same branch as the driver changes,
  the patches to the drivers are included as well.

  A much smaller set of driver updates that depend on other branches
  getting merged first will be sent later.

  The new export of tegra_chip_uid conflicts with other changes in
  fuse.c.  In rtc-sa1100.c, the global removal of IRQF_DISABLED
  conflicts with the cleanup of the interrupt handling of that driver.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fixed up aforementioned trivial conflicts.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
  ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci
  mmc: sdhci-s3c: add platform data for the second capability
  ARM: SAMSUNG: support the second capability for samsung-soc
  ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC
  ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1
  ARM: EXYNOS: Enable MDMA driver
  regulator: Remove bq24022 regulator driver
  rtc: sa1100: add OF support
  pxa: magician/hx4700: Convert to gpio-regulator from bq24022
  ARM: OMAP3+: SmartReflex: fix error handling
  ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API
  ARM: OMAP3+: SmartReflex: micro-optimization for sanity check
  ARM: OMAP3+: SmartReflex: misc cleanups
  ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument
  ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()
  ARM: OMAP3+: hwmod: add SmartReflex IRQs
  ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need
  ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register
  ARM: OMAP3+: SmartReflex: Add a shutdown hook
  ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP
  ...

Conflicts:
	arch/arm/mach-tegra/Makefile
	arch/arm/mach-tegra/fuse.c
	drivers/rtc/rtc-sa1100.c

14 files changed, 346 insertions, 278 deletions

diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index bdc2937..6f17671 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -25,6 +25,7 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/irqdomain.h>
 
 #include <asm/mach/irq.h>
 
@@ -74,9 +75,10 @@ struct tegra_gpio_bank {
 #endif
 };
 
-
+static struct irq_domain *irq_domain;
 static void __iomem *regs;
-static struct tegra_gpio_bank tegra_gpio_banks[7];
+static u32 tegra_gpio_bank_count;
+static struct tegra_gpio_bank *tegra_gpio_banks;
 
 static inline void tegra_gpio_writel(u32 val, u32 reg)
 {
@@ -139,7 +141,7 @@ static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
 
 static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
-	return TEGRA_GPIO_TO_IRQ(offset);
+	return irq_find_mapping(irq_domain, offset);
 }
 
 static struct gpio_chip tegra_gpio_chip = {
@@ -155,28 +157,28 @@ static struct gpio_chip tegra_gpio_chip = {
 
 static void tegra_gpio_irq_ack(struct irq_data *d)
 {
-	int gpio = d->irq - INT_GPIO_BASE;
+	int gpio = d->hwirq;
 
 	tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
 }
 
 static void tegra_gpio_irq_mask(struct irq_data *d)
 {
-	int gpio = d->irq - INT_GPIO_BASE;
+	int gpio = d->hwirq;
 
 	tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0);
 }
 
 static void tegra_gpio_irq_unmask(struct irq_data *d)
 {
-	int gpio = d->irq - INT_GPIO_BASE;
+	int gpio = d->hwirq;
 
 	tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1);
 }
 
 static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 {
-	int gpio = d->irq - INT_GPIO_BASE;
+	int gpio = d->hwirq;
 	struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
 	int port = GPIO_PORT(gpio);
 	int lvl_type;
@@ -273,7 +275,7 @@ void tegra_gpio_resume(void)
 
 	local_irq_save(flags);
 
-	for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
+	for (b = 0; b < tegra_gpio_bank_count; b++) {
 		struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
 
 		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
@@ -296,7 +298,7 @@ void tegra_gpio_suspend(void)
 	int p;
 
 	local_irq_save(flags);
-	for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
+	for (b = 0; b < tegra_gpio_bank_count; b++) {
 		struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
 
 		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
@@ -337,13 +339,44 @@ static struct lock_class_key gpio_lock_class;
 
 static int __devinit tegra_gpio_probe(struct platform_device *pdev)
 {
+	int irq_base;
 	struct resource *res;
 	struct tegra_gpio_bank *bank;
 	int gpio;
 	int i;
 	int j;
 
-	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+	for (;;) {
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, tegra_gpio_bank_count);
+		if (!res)
+			break;
+		tegra_gpio_bank_count++;
+	}
+	if (!tegra_gpio_bank_count) {
+		dev_err(&pdev->dev, "Missing IRQ resource\n");
+		return -ENODEV;
+	}
+
+	tegra_gpio_chip.ngpio = tegra_gpio_bank_count * 32;
+
+	tegra_gpio_banks = devm_kzalloc(&pdev->dev,
+			tegra_gpio_bank_count * sizeof(*tegra_gpio_banks),
+			GFP_KERNEL);
+	if (!tegra_gpio_banks) {
+		dev_err(&pdev->dev, "Couldn't allocate bank structure\n");
+		return -ENODEV;
+	}
+
+	irq_base = irq_alloc_descs(-1, 0, tegra_gpio_chip.ngpio, 0);
+	if (irq_base < 0) {
+		dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n");
+		return -ENODEV;
+	}
+	irq_domain = irq_domain_add_legacy(pdev->dev.of_node,
+					   tegra_gpio_chip.ngpio, irq_base, 0,
+					   &irq_domain_simple_ops, NULL);
+
+	for (i = 0; i < tegra_gpio_bank_count; i++) {
 		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
 		if (!res) {
 			dev_err(&pdev->dev, "Missing IRQ resource\n");
@@ -380,8 +413,8 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev)
 
 	gpiochip_add(&tegra_gpio_chip);
 
-	for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
-		int irq = TEGRA_GPIO_TO_IRQ(gpio);
+	for (gpio = 0; gpio < tegra_gpio_chip.ngpio; gpio++) {
+		int irq = irq_find_mapping(irq_domain, gpio);
 		/* No validity check; all Tegra GPIOs are valid IRQs */
 
 		bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
@@ -393,7 +426,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev)
 		set_irq_flags(irq, IRQF_VALID);
 	}
 
-	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+	for (i = 0; i < tegra_gpio_bank_count; i++) {
 		bank = &tegra_gpio_banks[i];
 
 		irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler);
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 124d9c5..dfb84b7 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -191,7 +191,7 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
 
-	clk_enable(i2c_imx->clk);
+	clk_prepare_enable(i2c_imx->clk);
 	writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR);
 	/* Enable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2SR);
@@ -240,7 +240,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
 
 	/* Disable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
-	clk_disable(i2c_imx->clk);
+	clk_disable_unprepare(i2c_imx->clk);
 }
 
 static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 0be4e20..6193a0d 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -464,7 +464,7 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		err = PTR_ERR(clk);
 		goto err_clk_get;
 	}
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 	pltfm_host->clk = clk;
 
 	if (!is_imx25_esdhc(imx_data))
@@ -559,7 +559,7 @@ no_card_detect_irq:
 		gpio_free(boarddata->wp_gpio);
 no_card_detect_pin:
 no_board_data:
-	clk_disable(pltfm_host->clk);
+	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 err_clk_get:
 	kfree(imx_data);
@@ -586,7 +586,7 @@ static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
 		gpio_free(boarddata->cd_gpio);
 	}
 
-	clk_disable(pltfm_host->clk);
+	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 	kfree(imx_data);
 
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 1af756e..b19e7d4 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -518,9 +518,6 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
 		host->mmc->caps = MMC_CAP_NONREMOVABLE;
 
-	if (pdata->host_caps)
-		host->mmc->caps |= pdata->host_caps;
-
 	if (pdata->pm_caps)
 		host->mmc->pm_caps |= pdata->pm_caps;
 
@@ -544,6 +541,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	if (pdata->host_caps)
 		host->mmc->caps |= pdata->host_caps;
 
+	if (pdata->host_caps2)
+		host->mmc->caps2 |= pdata->host_caps2;
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(dev, "sdhci_add_host() failed\n");
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 068c356..88bbd8f 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -190,8 +190,10 @@ static struct devprobe2 isa_probes[] __initdata = {
 	{seeq8005_probe, 0},
 #endif
 #ifdef CONFIG_CS89x0
+#ifndef CONFIG_CS89x0_PLATFORM
  	{cs89x0_probe, 0},
 #endif
+#endif
 #ifdef CONFIG_AT1700
 	{at1700_probe, 0},
 #endif
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 1f8648f..8388e36 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -5,8 +5,7 @@
 config NET_VENDOR_CIRRUS
 	bool "Cirrus devices"
 	default y
-	depends on ISA || EISA || MACH_IXDP2351 || ARCH_IXDP2X01 \
-		|| MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX) || MAC
+	depends on ISA || EISA || ARM || MAC
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -21,8 +20,7 @@ if NET_VENDOR_CIRRUS
 
 config CS89x0
 	tristate "CS89x0 support"
-	depends on (ISA || EISA || MACH_IXDP2351 \
-		|| ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
+	depends on ISA || EISA || ARM
 	---help---
 	  Support for CS89x0 chipset based Ethernet cards. If you have a
 	  network (Ethernet) card of this type, say Y and read the
@@ -33,10 +31,15 @@ config CS89x0
 	  To compile this driver as a module, choose M here. The module
 	  will be called cs89x0.
 
-config CS89x0_NONISA_IRQ
-	def_bool y
-	depends on CS89x0 != n
-	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+config CS89x0_PLATFORM
+	bool "CS89x0 platform driver support"
+	depends on CS89x0
+	help
+	  Say Y to compile the cs89x0 driver as a platform driver. This
+	  makes this driver suitable for use on certain evaluation boards
+	  such as the iMX21ADS.
+
+	  If you are unsure, say N.
 
 config EP93XX_ETH
 	tristate "EP93xx Ethernet support"
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index d5ff936..30fee42 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -100,9 +100,6 @@
 
 */
 
-/* Always include 'config.h' first in case the user wants to turn on
-   or override something. */
-#include <linux/module.h>
 
 /*
  * Set this to zero to disable DMA code
@@ -131,9 +128,12 @@
 
 */
 
+#include <linux/module.h>
+#include <linux/printk.h>
 #include <linux/errno.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/platform_device.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/fcntl.h>
@@ -151,6 +151,7 @@
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <linux/atomic.h>
 #if ALLOW_DMA
 #include <asm/dma.h>
 #endif
@@ -174,26 +175,20 @@ static char version[] __initdata =
    them to system IRQ numbers. This mapping is card specific and is set to
    the configuration of the Cirrus Eval board for this chip. */
 #if defined(CONFIG_MACH_IXDP2351)
+#define CS89x0_NONISA_IRQ
 static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
 #elif defined(CONFIG_ARCH_IXDP2X01)
+#define CS89x0_NONISA_IRQ
 static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
-#elif defined(CONFIG_MACH_QQ2440)
-#include <mach/qq2440.h>
-static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 };
-static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 };
-#elif defined(CONFIG_MACH_MX31ADS)
-#include <mach/board-mx31ads.h>
-static unsigned int netcard_portlist[] __used __initdata = {
-	PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0
-};
-static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0};
 #else
+#ifndef CONFIG_CS89x0_PLATFORM
 static unsigned int netcard_portlist[] __used __initdata =
    { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
 static unsigned int cs8900_irq_map[] = {10,11,12,5};
 #endif
+#endif
 
 #if DEBUGGING
 static unsigned int net_debug = DEBUGGING;
@@ -236,11 +231,16 @@ struct net_local {
 	unsigned char *end_dma_buff;	/* points to the end of the buffer */
 	unsigned char *rx_dma_ptr;	/* points to the next packet  */
 #endif
+#ifdef CONFIG_CS89x0_PLATFORM
+	void __iomem *virt_addr;/* Virtual address for accessing the CS89x0. */
+	unsigned long phys_addr;/* Physical address for accessing the CS89x0. */
+	unsigned long size;	/* Length of CS89x0 memory region. */
+#endif
 };
 
 /* Index to functions, as function prototypes. */
 
-static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular);
+static int cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular);
 static int net_open(struct net_device *dev);
 static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t net_interrupt(int irq, void *dev_id);
@@ -294,6 +294,7 @@ static int __init media_fn(char *str)
 __setup("cs89x0_media=", media_fn);
 
 
+#ifndef CONFIG_CS89x0_PLATFORM
 /* Check for a network adaptor of this type, and return '0' iff one exists.
    If dev->base_addr == 0, probe all likely locations.
    If dev->base_addr == 1, always return failure.
@@ -343,6 +344,7 @@ out:
 	return ERR_PTR(err);
 }
 #endif
+#endif
 
 #if defined(CONFIG_MACH_IXDP2351)
 static u16
@@ -504,7 +506,7 @@ static const struct net_device_ops net_ops = {
  */
 
 static int __init
-cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
+cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular)
 {
 	struct net_local *lp = netdev_priv(dev);
 	static unsigned version_printed;
@@ -529,15 +531,12 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 		lp->force = g_cs89x0_media__force;
 #endif
 
-#if defined(CONFIG_MACH_QQ2440)
-		lp->force |= FORCE_RJ45 | FORCE_FULL;
-#endif
         }
 
 	/* Grab the region so we can find another board if autoIRQ fails. */
 	/* WTF is going on here? */
 	if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) {
-		printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n",
+		printk(KERN_ERR "%s: request_region(0x%lx, 0x%x) failed\n",
 				DRV_NAME, ioaddr, NETCARD_IO_EXTENT);
 		retval = -EBUSY;
 		goto out1;
@@ -549,7 +548,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 	   will skip the test for the ADD_PORT. */
 	if (ioaddr & 1) {
 		if (net_debug > 1)
-			printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr);
+			printk(KERN_INFO "%s: odd ioaddr 0x%lx\n", dev->name, ioaddr);
 	        if ((ioaddr & 2) != 2)
 	        	if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) {
 				printk(KERN_ERR "%s: bad signature 0x%x\n",
@@ -560,13 +559,13 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 	}
 
 	ioaddr &= ~3;
-	printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n",
+	printk(KERN_DEBUG "PP_addr at %lx[%x]: 0x%x\n",
 			ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT));
 	writeword(ioaddr, ADD_PORT, PP_ChipID);
 
 	tmp = readword(ioaddr, DATA_PORT);
 	if (tmp != CHIP_EISA_ID_SIG) {
-		printk(KERN_DEBUG "%s: incorrect signature at %x[%x]: 0x%x!="
+		printk(KERN_DEBUG "%s: incorrect signature at %lx[%x]: 0x%x!="
 			CHIP_EISA_ID_SIG_STR "\n",
 			dev->name, ioaddr, DATA_PORT, tmp);
   		retval = -ENODEV;
@@ -736,8 +735,9 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 			dev->irq = i;
 	} else {
 		i = lp->isa_config & INT_NO_MASK;
+#ifndef CONFIG_CS89x0_PLATFORM
 		if (lp->chip_type == CS8900) {
-#ifdef CONFIG_CS89x0_NONISA_IRQ
+#ifdef CS89x0_NONISA_IRQ
 		        i = cs8900_irq_map[0];
 #else
 			/* Translate the IRQ using the IRQ mapping table. */
@@ -758,6 +758,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 			}
 #endif
 		}
+#endif
 		if (!dev->irq)
 			dev->irq = i;
 	}
@@ -1168,6 +1169,7 @@ write_irq(struct net_device *dev, int chip_type, int irq)
 	int i;
 
 	if (chip_type == CS8900) {
+#ifndef CONFIG_CS89x0_PLATFORM
 		/* Search the mapping table for the corresponding IRQ pin. */
 		for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++)
 			if (cs8900_irq_map[i] == irq)
@@ -1175,6 +1177,10 @@ write_irq(struct net_device *dev, int chip_type, int irq)
 		/* Not found */
 		if (i == ARRAY_SIZE(cs8900_irq_map))
 			i = 3;
+#else
+		/* INTRQ0 pin is used for interrupt generation. */
+		i = 0;
+#endif
 		writereg(dev, PP_CS8900_ISAINT, i);
 	} else {
 		writereg(dev, PP_CS8920_ISAINT, irq);
@@ -1228,7 +1234,7 @@ net_open(struct net_device *dev)
 	}
 	else
 	{
-#ifndef CONFIG_CS89x0_NONISA_IRQ
+#if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM)
 		if (((1 << dev->irq) & lp->irq_map) == 0) {
 			printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
                                dev->name, dev->irq, lp->irq_map);
@@ -1746,7 +1752,7 @@ static int set_mac_address(struct net_device *dev, void *p)
 	return 0;
 }
 
-#ifdef MODULE
+#if defined(MODULE) && !defined(CONFIG_CS89x0_PLATFORM)
 
 static struct net_device *dev_cs89x0;
 
@@ -1900,7 +1906,97 @@ cleanup_module(void)
 	release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT);
 	free_netdev(dev_cs89x0);
 }
-#endif /* MODULE */
+#endif /* MODULE && !CONFIG_CS89x0_PLATFORM */
+
+#ifdef CONFIG_CS89x0_PLATFORM
+static int __init cs89x0_platform_probe(struct platform_device *pdev)
+{
+	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+	struct net_local *lp;
+	struct resource *mem_res;
+	int err;
+
+	if (!dev)
+		return -ENOMEM;
+
+	lp = netdev_priv(dev);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dev->irq = platform_get_irq(pdev, 0);
+	if (mem_res == NULL || dev->irq <= 0) {
+		dev_warn(&dev->dev, "memory/interrupt resource missing.\n");
+		err = -ENXIO;
+		goto free;
+	}
+
+	lp->phys_addr = mem_res->start;
+	lp->size = resource_size(mem_res);
+	if (!request_mem_region(lp->phys_addr, lp->size, DRV_NAME)) {
+		dev_warn(&dev->dev, "request_mem_region() failed.\n");
+		err = -EBUSY;
+		goto free;
+	}
+
+	lp->virt_addr = ioremap(lp->phys_addr, lp->size);
+	if (!lp->virt_addr) {
+		dev_warn(&dev->dev, "ioremap() failed.\n");
+		err = -ENOMEM;
+		goto release;
+	}
+
+	err = cs89x0_probe1(dev, (unsigned long)lp->virt_addr, 0);
+	if (err) {
+		dev_warn(&dev->dev, "no cs8900 or cs8920 detected.\n");
+		goto unmap;
+	}
+
+	platform_set_drvdata(pdev, dev);
+	return 0;
+
+unmap:
+	iounmap(lp->virt_addr);
+release:
+	release_mem_region(lp->phys_addr, lp->size);
+free:
+	free_netdev(dev);
+	return err;
+}
+
+static int cs89x0_platform_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct net_local *lp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	iounmap(lp->virt_addr);
+	release_mem_region(lp->phys_addr, lp->size);
+	free_netdev(dev);
+	return 0;
+}
+
+static struct platform_driver cs89x0_driver = {
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.remove	= cs89x0_platform_remove,
+};
+
+static int __init cs89x0_init(void)
+{
+	return platform_driver_probe(&cs89x0_driver, cs89x0_platform_probe);
+}
+
+module_init(cs89x0_init);
+
+static void __exit cs89x0_cleanup(void)
+{
+	platform_driver_unregister(&cs89x0_driver);
+}
+
+module_exit(cs89x0_cleanup);
+
+#endif /* CONFIG_CS89x0_PLATFORM */
 
 /*
  * Local variables:
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index a229de9..36db5a4 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -258,14 +258,6 @@ config REGULATOR_DB8500_PRCMU
 	  This driver supports the voltage domain regulators controlled by the
 	  DB8500 PRCMU
 
-config REGULATOR_BQ24022
-	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
-	help
-	  This driver controls a TI bq24022 Charger attached via
-	  GPIOs. The provided current regulator can enable/disable
-	  charging select between 100 mA and 500 mA charging current
-	  limit.
-
 config REGULATOR_TPS6105X
 	tristate "TI TPS6105X Power regulators"
 	depends on TPS6105X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index b5042c8..94b5274 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
-obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
 obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
deleted file mode 100644
index 9fab6d1..0000000
--- a/drivers/regulator/bq24022.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
- * 1-Cell Li-Ion Charger connected via GPIOs.
- *
- * Copyright (c) 2008 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/regulator/bq24022.h>
-#include <linux/regulator/driver.h>
-
-
-static int bq24022_set_current_limit(struct regulator_dev *rdev,
-					int min_uA, int max_uA)
-{
-	struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
-
-	dev_dbg(rdev_get_dev(rdev), "setting current limit to %s mA\n",
-		max_uA >= 500000 ? "500" : "100");
-
-	/* REVISIT: maybe return error if min_uA != 0 ? */
-	gpio_set_value(pdata->gpio_iset2, max_uA >= 500000);
-	return 0;
-}
-
-static int bq24022_get_current_limit(struct regulator_dev *rdev)
-{
-	struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
-
-	return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000;
-}
-
-static int bq24022_enable(struct regulator_dev *rdev)
-{
-	struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
-
-	dev_dbg(rdev_get_dev(rdev), "enabling charger\n");
-
-	gpio_set_value(pdata->gpio_nce, 0);
-	return 0;
-}
-
-static int bq24022_disable(struct regulator_dev *rdev)
-{
-	struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
-
-	dev_dbg(rdev_get_dev(rdev), "disabling charger\n");
-
-	gpio_set_value(pdata->gpio_nce, 1);
-	return 0;
-}
-
-static int bq24022_is_enabled(struct regulator_dev *rdev)
-{
-	struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
-
-	return !gpio_get_value(pdata->gpio_nce);
-}
-
-static struct regulator_ops bq24022_ops = {
-	.set_current_limit = bq24022_set_current_limit,
-	.get_current_limit = bq24022_get_current_limit,
-	.enable            = bq24022_enable,
-	.disable           = bq24022_disable,
-	.is_enabled        = bq24022_is_enabled,
-};
-
-static struct regulator_desc bq24022_desc = {
-	.name  = "bq24022",
-	.ops   = &bq24022_ops,
-	.type  = REGULATOR_CURRENT,
-	.owner = THIS_MODULE,
-};
-
-static int __init bq24022_probe(struct platform_device *pdev)
-{
-	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
-	struct regulator_dev *bq24022;
-	int ret;
-
-	if (!pdata || !pdata->gpio_nce || !pdata->gpio_iset2)
-		return -EINVAL;
-
-	ret = gpio_request(pdata->gpio_nce, "ncharge_en");
-	if (ret) {
-		dev_dbg(&pdev->dev, "couldn't request nCE GPIO: %d\n",
-			pdata->gpio_nce);
-		goto err_ce;
-	}
-	ret = gpio_request(pdata->gpio_iset2, "charge_mode");
-	if (ret) {
-		dev_dbg(&pdev->dev, "couldn't request ISET2 GPIO: %d\n",
-			pdata->gpio_iset2);
-		goto err_iset2;
-	}
-	ret = gpio_direction_output(pdata->gpio_iset2, 0);
-	ret = gpio_direction_output(pdata->gpio_nce, 1);
-
-	bq24022 = regulator_register(&bq24022_desc, &pdev->dev,
-				     pdata->init_data, pdata, NULL);
-	if (IS_ERR(bq24022)) {
-		dev_dbg(&pdev->dev, "couldn't register regulator\n");
-		ret = PTR_ERR(bq24022);
-		goto err_reg;
-	}
-	platform_set_drvdata(pdev, bq24022);
-	dev_dbg(&pdev->dev, "registered regulator\n");
-
-	return 0;
-err_reg:
-	gpio_free(pdata->gpio_iset2);
-err_iset2:
-	gpio_free(pdata->gpio_nce);
-err_ce:
-	return ret;
-}
-
-static int __devexit bq24022_remove(struct platform_device *pdev)
-{
-	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
-	struct regulator_dev *bq24022 = platform_get_drvdata(pdev);
-
-	regulator_unregister(bq24022);
-	gpio_free(pdata->gpio_iset2);
-	gpio_free(pdata->gpio_nce);
-
-	return 0;
-}
-
-static struct platform_driver bq24022_driver = {
-	.driver = {
-		.name = "bq24022",
-	},
-	.remove = __devexit_p(bq24022_remove),
-};
-
-static int __init bq24022_init(void)
-{
-	return platform_driver_probe(&bq24022_driver, bq24022_probe);
-}
-
-static void __exit bq24022_exit(void)
-{
-	platform_driver_unregister(&bq24022_driver);
-}
-
-module_init(bq24022_init);
-module_exit(bq24022_exit);
-
-MODULE_AUTHOR("Philipp Zabel");
-MODULE_DESCRIPTION("TI bq24022 Li-Ion Charger driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4768a9d..8c8377d 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -780,8 +780,8 @@ config RTC_DRV_EP93XX
 	  will be called rtc-ep93xx.
 
 config RTC_DRV_SA1100
-	tristate "SA11x0/PXA2xx"
-	depends on ARCH_SA1100 || ARCH_PXA
+	tristate "SA11x0/PXA2xx/PXA910"
+	depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
 	help
 	  If you say Y here you will get access to the real time clock
 	  built into your SA11x0 or PXA2xx CPU.
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index c543f6f..9ccea13 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -35,6 +35,8 @@
 
 enum s3c_cpu_type {
 	TYPE_S3C2410,
+	TYPE_S3C2416,
+	TYPE_S3C2443,
 	TYPE_S3C64XX,
 };
 
@@ -132,6 +134,7 @@ static int s3c_rtc_setfreq(struct device *dev, int freq)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
 	unsigned int tmp = 0;
+	int val;
 
 	if (!is_power_of_2(freq))
 		return -EINVAL;
@@ -139,12 +142,22 @@ static int s3c_rtc_setfreq(struct device *dev, int freq)
 	clk_enable(rtc_clk);
 	spin_lock_irq(&s3c_rtc_pie_lock);
 
-	if (s3c_rtc_cpu_type == TYPE_S3C2410) {
+	if (s3c_rtc_cpu_type != TYPE_S3C64XX) {
 		tmp = readb(s3c_rtc_base + S3C2410_TICNT);
 		tmp &= S3C2410_TICNT_ENABLE;
 	}
 
-	tmp |= (rtc_dev->max_user_freq / freq)-1;
+	val = (rtc_dev->max_user_freq / freq) - 1;
+
+	if (s3c_rtc_cpu_type == TYPE_S3C2416 || s3c_rtc_cpu_type == TYPE_S3C2443) {
+		tmp |= S3C2443_TICNT_PART(val);
+		writel(S3C2443_TICNT1_PART(val), s3c_rtc_base + S3C2443_TICNT1);
+
+		if (s3c_rtc_cpu_type == TYPE_S3C2416)
+			writel(S3C2416_TICNT2_PART(val), s3c_rtc_base + S3C2416_TICNT2);
+	} else {
+		tmp |= val;
+	}
 
 	writel(tmp, s3c_rtc_base + S3C2410_TICNT);
 	spin_unlock_irq(&s3c_rtc_pie_lock);
@@ -371,7 +384,7 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en)
 		tmp &= ~S3C2410_RTCCON_RTCEN;
 		writew(tmp, base + S3C2410_RTCCON);
 
-		if (s3c_rtc_cpu_type == TYPE_S3C2410) {
+		if (s3c_rtc_cpu_type != TYPE_S3C64XX) {
 			tmp = readb(base + S3C2410_TICNT);
 			tmp &= ~S3C2410_TICNT_ENABLE;
 			writeb(tmp, base + S3C2410_TICNT);
@@ -428,12 +441,27 @@ static int __devexit s3c_rtc_remove(struct platform_device *dev)
 	return 0;
 }
 
+static const struct of_device_id s3c_rtc_dt_match[];
+
+static inline int s3c_rtc_get_driver_data(struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node);
+		return match->data;
+	}
+#endif
+	return platform_get_device_id(pdev)->driver_data;
+}
+
 static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 	struct rtc_time rtc_tm;
 	struct resource *res;
 	int ret;
+	int tmp;
 
 	pr_debug("%s: probe=%p\n", __func__, pdev);
 
@@ -508,13 +536,7 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 		goto err_nortc;
 	}
 
-#ifdef CONFIG_OF
-	if (pdev->dev.of_node)
-		s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node,
-			"samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410;
-	else
-#endif
-		s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+	s3c_rtc_cpu_type = s3c_rtc_get_driver_data(pdev);
 
 	/* Check RTC Time */
 
@@ -533,11 +555,17 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "warning: invalid RTC value so initializing it\n");
 	}
 
-	if (s3c_rtc_cpu_type == TYPE_S3C64XX)
+	if (s3c_rtc_cpu_type != TYPE_S3C2410)
 		rtc->max_user_freq = 32768;
 	else
 		rtc->max_user_freq = 128;
 
+	if (s3c_rtc_cpu_type == TYPE_S3C2416 || s3c_rtc_cpu_type == TYPE_S3C2443) {
+		tmp = readw(s3c_rtc_base + S3C2410_RTCCON);
+		tmp |= S3C2443_RTCCON_TICSEL;
+		writew(tmp, s3c_rtc_base + S3C2410_RTCCON);
+	}
+
 	platform_set_drvdata(pdev, rtc);
 
 	s3c_rtc_setfreq(&pdev->dev, 1);
@@ -638,8 +666,19 @@ static int s3c_rtc_resume(struct platform_device *pdev)
 
 #ifdef CONFIG_OF
 static const struct of_device_id s3c_rtc_dt_match[] = {
-	{ .compatible = "samsung,s3c2410-rtc" },
-	{ .compatible = "samsung,s3c6410-rtc" },
+	{
+		.compatible = "samsung,s3c2410-rtc"
+		.data = TYPE_S3C2410,
+	}, {
+		.compatible = "samsung,s3c2416-rtc"
+		.data = TYPE_S3C2416,
+	}, {
+		.compatible = "samsung,s3c2443-rtc"
+		.data = TYPE_S3C2443,
+	}, {
+		.compatible = "samsung,s3c6410-rtc"
+		.data = TYPE_S3C64XX,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match);
@@ -652,6 +691,12 @@ static struct platform_device_id s3c_rtc_driver_ids[] = {
 		.name		= "s3c2410-rtc",
 		.driver_data	= TYPE_S3C2410,
 	}, {
+		.name		= "s3c2416-rtc",
+		.driver_data	= TYPE_S3C2416,
+	}, {
+		.name		= "s3c2443-rtc",
+		.driver_data	= TYPE_S3C2443,
+	}, {
 		.name		= "s3c64xx-rtc",
 		.driver_data	= TYPE_S3C64XX,
 	},
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 44cd81c..fa512ed 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -23,35 +23,44 @@
 
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/clk.h>
 #include <linux/rtc.h>
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/of.h>
 #include <linux/pm.h>
 #include <linux/bitops.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
-#ifdef CONFIG_ARCH_PXA
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
 #include <mach/regs-rtc.h>
 #endif
 
 #define RTC_DEF_DIVIDER		(32768 - 1)
 #define RTC_DEF_TRIM		0
-
-static const unsigned long RTC_FREQ = 1024;
-static DEFINE_SPINLOCK(sa1100_rtc_lock);
+#define RTC_FREQ		1024
+
+struct sa1100_rtc {
+	spinlock_t		lock;
+	int			irq_1hz;
+	int			irq_alarm;
+	struct rtc_device	*rtc;
+	struct clk		*clk;
+};
 
 static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 {
-	struct platform_device *pdev = to_platform_device(dev_id);
-	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	struct sa1100_rtc *info = dev_get_drvdata(dev_id);
+	struct rtc_device *rtc = info->rtc;
 	unsigned int rtsr;
 	unsigned long events = 0;
 
-	spin_lock(&sa1100_rtc_lock);
+	spin_lock(&info->lock);
 
 	rtsr = RTSR;
 	/* clear interrupt sources */
@@ -87,26 +96,28 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 
 	rtc_update_irq(rtc, 1, events);
 
-	spin_unlock(&sa1100_rtc_lock);
+	spin_unlock(&info->lock);
 
 	return IRQ_HANDLED;
 }
 
 static int sa1100_rtc_open(struct device *dev)
 {
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+	struct rtc_device *rtc = info->rtc;
 	int ret;
-	struct platform_device *plat_dev = to_platform_device(dev);
-	struct rtc_device *rtc = platform_get_drvdata(plat_dev);
 
-	ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, 0, "rtc 1Hz", dev);
+	ret = clk_prepare_enable(info->clk);
+	if (ret)
+		goto fail_clk;
+	ret = request_irq(info->irq_1hz, sa1100_rtc_interrupt, 0, "rtc 1Hz", dev);
 	if (ret) {
-		dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
+		dev_err(dev, "IRQ %d already in use.\n", info->irq_1hz);
 		goto fail_ui;
 	}
-	ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, 0,
-			  "rtc Alrm", dev);
+	ret = request_irq(info->irq_alarm, sa1100_rtc_interrupt, 0, "rtc Alrm", dev);
 	if (ret) {
-		dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
+		dev_err(dev, "IRQ %d already in use.\n", info->irq_alarm);
 		goto fail_ai;
 	}
 	rtc->max_user_freq = RTC_FREQ;
@@ -115,29 +126,36 @@ static int sa1100_rtc_open(struct device *dev)
 	return 0;
 
  fail_ai:
-	free_irq(IRQ_RTC1Hz, dev);
+	free_irq(info->irq_1hz, dev);
  fail_ui:
+	clk_disable_unprepare(info->clk);
+ fail_clk:
 	return ret;
 }
 
 static void sa1100_rtc_release(struct device *dev)
 {
-	spin_lock_irq(&sa1100_rtc_lock);
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+	spin_lock_irq(&info->lock);
 	RTSR = 0;
-	spin_unlock_irq(&sa1100_rtc_lock);
+	spin_unlock_irq(&info->lock);
 
-	free_irq(IRQ_RTCAlrm, dev);
-	free_irq(IRQ_RTC1Hz, dev);
+	free_irq(info->irq_alarm, dev);
+	free_irq(info->irq_1hz, dev);
+	clk_disable_unprepare(info->clk);
 }
 
 static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
-	spin_lock_irq(&sa1100_rtc_lock);
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+	spin_lock_irq(&info->lock);
 	if (enabled)
 		RTSR |= RTSR_ALE;
 	else
 		RTSR &= ~RTSR_ALE;
-	spin_unlock_irq(&sa1100_rtc_lock);
+	spin_unlock_irq(&info->lock);
 	return 0;
 }
 
@@ -170,10 +188,11 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
 	unsigned long time;
 	int ret;
 
-	spin_lock_irq(&sa1100_rtc_lock);
+	spin_lock_irq(&info->lock);
 	ret = rtc_tm_to_time(&alrm->time, &time);
 	if (ret != 0)
 		goto out;
@@ -184,7 +203,7 @@ static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	else
 		RTSR &= ~RTSR_ALE;
 out:
-	spin_unlock_irq(&sa1100_rtc_lock);
+	spin_unlock_irq(&info->lock);
 
 	return ret;
 }
@@ -211,6 +230,27 @@ static const struct rtc_class_ops sa1100_rtc_ops = {
 static int sa1100_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
+	struct sa1100_rtc *info;
+	int irq_1hz, irq_alarm, ret = 0;
+
+	irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
+	irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
+	if (irq_1hz < 0 || irq_alarm < 0)
+		return -ENODEV;
+
+	info = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	info->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(info->clk)) {
+		dev_err(&pdev->dev, "failed to find rtc clock source\n");
+		ret = PTR_ERR(info->clk);
+		goto err_clk;
+	}
+	info->irq_1hz = irq_1hz;
+	info->irq_alarm = irq_alarm;
+	spin_lock_init(&info->lock);
+	platform_set_drvdata(pdev, info);
 
 	/*
 	 * According to the manual we should be able to let RTTR be zero
@@ -232,10 +272,11 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
 		THIS_MODULE);
 
-	if (IS_ERR(rtc))
-		return PTR_ERR(rtc);
-
-	platform_set_drvdata(pdev, rtc);
+	if (IS_ERR(rtc)) {
+		ret = PTR_ERR(rtc);
+		goto err_dev;
+	}
+	info->rtc = rtc;
 
 	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
 	 * See also the comments in sa1100_rtc_interrupt().
@@ -262,14 +303,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	RTSR = RTSR_AL | RTSR_HZ;
 
 	return 0;
+err_dev:
+	platform_set_drvdata(pdev, NULL);
+	clk_put(info->clk);
+err_clk:
+	kfree(info);
+	return ret;
 }
 
 static int sa1100_rtc_remove(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	struct sa1100_rtc *info = platform_get_drvdata(pdev);
 
-	if (rtc)
-		rtc_device_unregister(rtc);
+	if (info) {
+		rtc_device_unregister(info->rtc);
+		clk_put(info->clk);
+		platform_set_drvdata(pdev, NULL);
+		kfree(info);
+	}
 
 	return 0;
 }
@@ -277,15 +328,17 @@ static int sa1100_rtc_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int sa1100_rtc_suspend(struct device *dev)
 {
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
 	if (device_may_wakeup(dev))
-		enable_irq_wake(IRQ_RTCAlrm);
+		enable_irq_wake(info->irq_alarm);
 	return 0;
 }
 
 static int sa1100_rtc_resume(struct device *dev)
 {
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
 	if (device_may_wakeup(dev))
-		disable_irq_wake(IRQ_RTCAlrm);
+		disable_irq_wake(info->irq_alarm);
 	return 0;
 }
 
@@ -295,6 +348,13 @@ static const struct dev_pm_ops sa1100_rtc_pm_ops = {
 };
 #endif
 
+static struct of_device_id sa1100_rtc_dt_ids[] = {
+	{ .compatible = "mrvl,sa1100-rtc", },
+	{ .compatible = "mrvl,mmp-rtc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids);
+
 static struct platform_driver sa1100_rtc_driver = {
 	.probe		= sa1100_rtc_probe,
 	.remove		= sa1100_rtc_remove,
@@ -303,6 +363,7 @@ static struct platform_driver sa1100_rtc_driver = {
 #ifdef CONFIG_PM
 		.pm	= &sa1100_rtc_pm_ops,
 #endif
+		.of_match_table = sa1100_rtc_dt_ids,
 	},
 };
 
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 0b7fed7..e7fecee 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1508,7 +1508,7 @@ static int serial_imx_probe(struct platform_device *pdev)
 		ret = PTR_ERR(sport->clk);
 		goto unmap;
 	}
-	clk_enable(sport->clk);
+	clk_prepare_enable(sport->clk);
 
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
@@ -1531,8 +1531,8 @@ deinit:
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 clkput:
+	clk_disable_unprepare(sport->clk);
 	clk_put(sport->clk);
-	clk_disable(sport->clk);
 unmap:
 	iounmap(sport->port.membase);
 free:
@@ -1552,11 +1552,10 @@ static int serial_imx_remove(struct platform_device *pdev)
 
 	if (sport) {
 		uart_remove_one_port(&imx_reg, &sport->port);
+		clk_disable_unprepare(sport->clk);
 		clk_put(sport->clk);
 	}
 
-	clk_disable(sport->clk);
-
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);