summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorJeff Garzik <jeff@garzik.org>2006-03-11 19:55:26 -0500
committerJeff Garzik <jeff@garzik.org>2006-03-11 19:55:26 -0500
commited071adc97a69785686a37fb88e100f41b482b94 (patch)
tree75be27a48365aab9cfe6531f7d1f5516e6602307 /drivers
parent6971ed1fbbc80cae54e082aae153d5b063885d0a (diff)
parent535744878e34d01a53f946f26dfbca37186f2cf8 (diff)
downloadop-kernel-dev-ed071adc97a69785686a37fb88e100f41b482b94.zip
op-kernel-dev-ed071adc97a69785686a37fb88e100f41b482b94.tar.gz
Merge branch 'master'
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/3c509.c13
-rw-r--r--drivers/net/Kconfig3
-rw-r--r--drivers/net/de620.c2
-rw-r--r--drivers/net/dl2k.c25
-rw-r--r--drivers/net/e1000/e1000_main.c2
-rw-r--r--drivers/net/sky2.c32
-rw-r--r--drivers/net/tulip/de2104x.c26
7 files changed, 61 insertions, 42 deletions
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 824e430..830528d 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -1574,6 +1574,7 @@ MODULE_LICENSE("GPL");
static int __init el3_init_module(void)
{
+ int ret = 0;
el3_cards = 0;
if (debug >= 0)
@@ -1589,14 +1590,16 @@ static int __init el3_init_module(void)
}
#ifdef CONFIG_EISA
- if (eisa_driver_register (&el3_eisa_driver) < 0) {
- eisa_driver_unregister (&el3_eisa_driver);
- }
+ ret = eisa_driver_register(&el3_eisa_driver);
#endif
#ifdef CONFIG_MCA
- mca_register_driver(&el3_mca_driver);
+ {
+ int err = mca_register_driver(&el3_mca_driver);
+ if (ret == 0)
+ ret = err;
+ }
#endif
- return 0;
+ return ret;
}
static void __exit el3_cleanup_module(void)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e45a8f9..aa633fa 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1087,7 +1087,8 @@ config NE2000
without a specific driver are compatible with NE2000.
If you have a PCI NE2000 card however, say N here and Y to "PCI
- NE2000 support", above. If you have a NE2000 card and are running on
+ NE2000 and clone support" under "EISA, VLB, PCI and on board
+ controllers" below. If you have a NE2000 card and are running on
an MCA system (a bus system used on some IBM PS/2 computers and
laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
below.
diff --git a/drivers/net/de620.c b/drivers/net/de620.c
index 0069f5f..22fc5b8 100644
--- a/drivers/net/de620.c
+++ b/drivers/net/de620.c
@@ -1012,7 +1012,7 @@ static int __init read_eeprom(struct net_device *dev)
#ifdef MODULE
static struct net_device *de620_dev;
-int init_module(void)
+int __init init_module(void)
{
de620_dev = de620_probe(-1);
if (IS_ERR(de620_dev))
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 430c628..fb9dae3 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -50,8 +50,8 @@
*/
#define DRV_NAME "D-Link DL2000-based linux driver"
-#define DRV_VERSION "v1.17a"
-#define DRV_RELDATE "2002/10/04"
+#define DRV_VERSION "v1.17b"
+#define DRV_RELDATE "2006/03/10"
#include "dl2k.h"
static char version[] __devinitdata =
@@ -765,7 +765,7 @@ rio_free_tx (struct net_device *dev, int irq)
break;
skb = np->tx_skbuff[entry];
pci_unmap_single (np->pdev,
- np->tx_ring[entry].fraginfo,
+ np->tx_ring[entry].fraginfo & 0xffffffffffff,
skb->len, PCI_DMA_TODEVICE);
if (irq)
dev_kfree_skb_irq (skb);
@@ -892,14 +892,16 @@ receive_packet (struct net_device *dev)
/* Small skbuffs for short packets */
if (pkt_len > copy_thresh) {
- pci_unmap_single (np->pdev, desc->fraginfo,
+ pci_unmap_single (np->pdev,
+ desc->fraginfo & 0xffffffffffff,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb_put (skb = np->rx_skbuff[entry], pkt_len);
np->rx_skbuff[entry] = NULL;
} else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) {
pci_dma_sync_single_for_cpu(np->pdev,
- desc->fraginfo,
+ desc->fraginfo &
+ 0xffffffffffff,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb->dev = dev;
@@ -910,7 +912,8 @@ receive_packet (struct net_device *dev)
pkt_len, 0);
skb_put (skb, pkt_len);
pci_dma_sync_single_for_device(np->pdev,
- desc->fraginfo,
+ desc->fraginfo &
+ 0xffffffffffff,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
}
@@ -1796,8 +1799,9 @@ rio_close (struct net_device *dev)
np->rx_ring[i].fraginfo = 0;
skb = np->rx_skbuff[i];
if (skb) {
- pci_unmap_single (np->pdev, np->rx_ring[i].fraginfo,
- skb->len, PCI_DMA_FROMDEVICE);
+ pci_unmap_single(np->pdev,
+ np->rx_ring[i].fraginfo & 0xffffffffffff,
+ skb->len, PCI_DMA_FROMDEVICE);
dev_kfree_skb (skb);
np->rx_skbuff[i] = NULL;
}
@@ -1805,8 +1809,9 @@ rio_close (struct net_device *dev)
for (i = 0; i < TX_RING_SIZE; i++) {
skb = np->tx_skbuff[i];
if (skb) {
- pci_unmap_single (np->pdev, np->tx_ring[i].fraginfo,
- skb->len, PCI_DMA_TODEVICE);
+ pci_unmap_single(np->pdev,
+ np->tx_ring[i].fraginfo & 0xffffffffffff,
+ skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb (skb);
np->tx_skbuff[i] = NULL;
}
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 5b7d0f4..4c4db96 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2917,7 +2917,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
if (!__pskb_pull_tail(skb, pull_size)) {
printk(KERN_ERR "__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb);
- return -EFAULT;
+ return NETDEV_TX_OK;
}
len = skb->len - skb->data_len;
}
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 72c1630..7326036 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -74,7 +74,7 @@
#define TX_RING_SIZE 512
#define TX_DEF_PENDING (TX_RING_SIZE - 1)
#define TX_MIN_PENDING 64
-#define MAX_SKB_TX_LE (4 + 2*MAX_SKB_FRAGS)
+#define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
#define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
#define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
@@ -622,8 +622,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
/* Configure Rx MAC FIFO */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
- sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T),
- GMF_RX_CTRL_DEF);
+ sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
+ GMF_OPER_ON | GMF_RX_F_FL_ON);
/* Flush Rx MAC FIFO on any flow control or error */
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
@@ -995,6 +995,10 @@ static int sky2_rx_start(struct sky2_port *sky2)
sky2_rx_add(sky2, re->mapaddr);
}
+ /* Truncate oversize frames */
+ sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8);
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
/* Tell chip about available buffers */
sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
sky2->rx_last_put = sky2_read16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX));
@@ -1145,6 +1149,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
struct sky2_tx_le *le = NULL;
struct tx_ring_info *re;
unsigned i, len;
+ int avail;
dma_addr_t mapping;
u32 addr64;
u16 mss;
@@ -1287,12 +1292,16 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
re->idx = sky2->tx_prod;
le->ctrl |= EOP;
+ avail = tx_avail(sky2);
+ if (mss != 0 || avail < TX_MIN_PENDING) {
+ le->ctrl |= FRC_STAT;
+ if (avail <= MAX_SKB_TX_LE)
+ netif_stop_queue(dev);
+ }
+
sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod,
&sky2->tx_last_put, TX_RING_SIZE);
- if (tx_avail(sky2) <= MAX_SKB_TX_LE)
- netif_stop_queue(dev);
-
out_unlock:
spin_unlock(&sky2->tx_lock);
@@ -1707,10 +1716,12 @@ static void sky2_tx_timeout(struct net_device *dev)
#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
-/* Want receive buffer size to be multiple of 64 bits, and incl room for vlan */
+/* Want receive buffer size to be multiple of 64 bits
+ * and incl room for vlan and truncation
+ */
static inline unsigned sky2_buf_size(int mtu)
{
- return roundup(mtu + ETH_HLEN + 4, 8);
+ return roundup(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8;
}
static int sky2_change_mtu(struct net_device *dev, int new_mtu)
@@ -1793,7 +1804,7 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2,
if (!(status & GMR_FS_RX_OK))
goto resubmit;
- if ((status >> 16) != length || length > sky2->rx_bufsize)
+ if (length > sky2->netdev->mtu + ETH_HLEN)
goto oversize;
if (length < copybreak) {
@@ -3243,8 +3254,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
}
}
- err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM,
- DRV_NAME, hw);
+ err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index d7fb3ff..2d0cfbc 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -1362,7 +1362,6 @@ static int de_open (struct net_device *dev)
{
struct de_private *de = dev->priv;
int rc;
- unsigned long flags;
if (netif_msg_ifup(de))
printk(KERN_DEBUG "%s: enabling interface\n", dev->name);
@@ -1376,18 +1375,20 @@ static int de_open (struct net_device *dev)
return rc;
}
- rc = de_init_hw(de);
- if (rc) {
- printk(KERN_ERR "%s: h/w init failure, err=%d\n",
- dev->name, rc);
- goto err_out_free;
- }
+ dw32(IntrMask, 0);
rc = request_irq(dev->irq, de_interrupt, SA_SHIRQ, dev->name, dev);
if (rc) {
printk(KERN_ERR "%s: IRQ %d request failure, err=%d\n",
dev->name, dev->irq, rc);
- goto err_out_hw;
+ goto err_out_free;
+ }
+
+ rc = de_init_hw(de);
+ if (rc) {
+ printk(KERN_ERR "%s: h/w init failure, err=%d\n",
+ dev->name, rc);
+ goto err_out_free_irq;
}
netif_start_queue(dev);
@@ -1395,11 +1396,8 @@ static int de_open (struct net_device *dev)
return 0;
-err_out_hw:
- spin_lock_irqsave(&de->lock, flags);
- de_stop_hw(de);
- spin_unlock_irqrestore(&de->lock, flags);
-
+err_out_free_irq:
+ free_irq(dev->irq, dev);
err_out_free:
de_free_rings(de);
return rc;
@@ -1455,6 +1453,8 @@ static void de_tx_timeout (struct net_device *dev)
synchronize_irq(dev->irq);
de_clean_rings(de);
+ de_init_rings(de);
+
de_init_hw(de);
netif_wake_queue(dev);
OpenPOWER on IntegriCloud