Merge branch 'master'

391 files changed, 7954 insertions, 3268 deletions

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index fef7bab..56c5ba8 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -107,7 +107,6 @@ config ACPI_BUTTON
 config ACPI_VIDEO
 	tristate "Video"
 	depends on X86
-	default y
 	help
 	  This driver implement the ACPI Extensions For Display Adapters
 	  for integrated graphics devices on motherboard, as specified in
@@ -135,8 +134,7 @@ config ACPI_FAN
 
 config ACPI_DOCK
 	tristate "Dock"
-	depends on !ACPI_IBM_DOCK
-	default y
+	depends on EXPERIMENTAL
 	help
 	  This driver adds support for ACPI controlled docking stations
 
@@ -214,6 +212,7 @@ config ACPI_IBM
 config ACPI_IBM_DOCK
 	bool "Legacy Docking Station Support"
 	depends on ACPI_IBM
+	depends on ACPI_DOCK=n
 	default n
 	---help---
 	  Allows the ibm_acpi driver to handle docking station events.
@@ -357,7 +356,6 @@ config ACPI_SBS
 	tristate "Smart Battery System (EXPERIMENTAL)"
 	depends on X86 && I2C
 	depends on EXPERIMENTAL
-	default y
 	help
 	  This driver adds support for the Smart Battery System.
 	  Depends on I2C (Device Drivers ---> I2C support)
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 24ccf81..96309b9 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -72,7 +72,7 @@ struct acpi_ac {
 	unsigned long state;
 };
 
-static struct file_operations acpi_ac_fops = {
+static const struct file_operations acpi_ac_fops = {
 	.open = acpi_ac_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 24bf4dc..6e52217 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -557,7 +557,7 @@ static int acpi_battery_alarm_open_fs(struct inode *inode, struct file *file)
 	return single_open(file, acpi_battery_read_alarm, PDE(inode)->data);
 }
 
-static struct file_operations acpi_battery_info_ops = {
+static const struct file_operations acpi_battery_info_ops = {
 	.open = acpi_battery_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -565,7 +565,7 @@ static struct file_operations acpi_battery_info_ops = {
 	.owner = THIS_MODULE,
 };
 
-static struct file_operations acpi_battery_state_ops = {
+static const struct file_operations acpi_battery_state_ops = {
 	.open = acpi_battery_state_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -573,7 +573,7 @@ static struct file_operations acpi_battery_state_ops = {
 	.owner = THIS_MODULE,
 };
 
-static struct file_operations acpi_battery_alarm_ops = {
+static const struct file_operations acpi_battery_alarm_ops = {
 	.open = acpi_battery_alarm_open_fs,
 	.read = seq_read,
 	.write = acpi_battery_write_alarm,
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index ea5a049..b297769 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -192,8 +192,8 @@ int acpi_bus_set_power(acpi_handle handle, int state)
 	/* Make sure this is a valid target state */
 
 	if (!device->flags.power_manageable) {
-		printk(KERN_DEBUG "Device `[%s]' is not power manageable",
-				device->kobj.name);
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable",
+				device->kobj.name));
 		return -ENODEV;
 	}
 	/*
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index fd1ba05..5ef885e 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -87,14 +87,14 @@ struct acpi_button {
 	unsigned long pushed;
 };
 
-static struct file_operations acpi_button_info_fops = {
+static const struct file_operations acpi_button_info_fops = {
 	.open = acpi_button_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
 	.release = single_release,
 };
 
-static struct file_operations acpi_button_state_fops = {
+static const struct file_operations acpi_button_state_fops = {
 	.open = acpi_button_state_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c
index 574a75a..a01ce67 100644
--- a/drivers/acpi/cm_sbs.c
+++ b/drivers/acpi/cm_sbs.c
@@ -39,50 +39,43 @@ ACPI_MODULE_NAME("cm_sbs")
 static struct proc_dir_entry *acpi_ac_dir;
 static struct proc_dir_entry *acpi_battery_dir;
 
-static struct semaphore cm_sbs_sem;
+static DEFINE_MUTEX(cm_sbs_mutex);
 
-static int lock_ac_dir_cnt = 0;
-static int lock_battery_dir_cnt = 0;
+static int lock_ac_dir_cnt;
+static int lock_battery_dir_cnt;
 
 struct proc_dir_entry *acpi_lock_ac_dir(void)
 {
-
-	down(&cm_sbs_sem);
-	if (!acpi_ac_dir) {
+	mutex_lock(&cm_sbs_mutex);
+	if (!acpi_ac_dir)
 		acpi_ac_dir = proc_mkdir(ACPI_AC_CLASS, acpi_root_dir);
-	}
 	if (acpi_ac_dir) {
 		lock_ac_dir_cnt++;
 	} else {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Cannot create %s\n", ACPI_AC_CLASS));
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return acpi_ac_dir;
 }
-
 EXPORT_SYMBOL(acpi_lock_ac_dir);
 
 void acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir_param)
 {
-
-	down(&cm_sbs_sem);
-	if (acpi_ac_dir_param) {
+	mutex_lock(&cm_sbs_mutex);
+	if (acpi_ac_dir_param)
 		lock_ac_dir_cnt--;
-	}
 	if (lock_ac_dir_cnt == 0 && acpi_ac_dir_param && acpi_ac_dir) {
 		remove_proc_entry(ACPI_AC_CLASS, acpi_root_dir);
 		acpi_ac_dir = 0;
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 }
-
 EXPORT_SYMBOL(acpi_unlock_ac_dir);
 
 struct proc_dir_entry *acpi_lock_battery_dir(void)
 {
-
-	down(&cm_sbs_sem);
+	mutex_lock(&cm_sbs_mutex);
 	if (!acpi_battery_dir) {
 		acpi_battery_dir =
 		    proc_mkdir(ACPI_BATTERY_CLASS, acpi_root_dir);
@@ -93,39 +86,28 @@ struct proc_dir_entry *acpi_lock_battery_dir(void)
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Cannot create %s\n", ACPI_BATTERY_CLASS));
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return acpi_battery_dir;
 }
-
 EXPORT_SYMBOL(acpi_lock_battery_dir);
 
 void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param)
 {
-
-	down(&cm_sbs_sem);
-	if (acpi_battery_dir_param) {
+	mutex_lock(&cm_sbs_mutex);
+	if (acpi_battery_dir_param)
 		lock_battery_dir_cnt--;
-	}
 	if (lock_battery_dir_cnt == 0 && acpi_battery_dir_param
 	    && acpi_battery_dir) {
 		remove_proc_entry(ACPI_BATTERY_CLASS, acpi_root_dir);
 		acpi_battery_dir = 0;
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return;
 }
-
 EXPORT_SYMBOL(acpi_unlock_battery_dir);
 
 static int __init acpi_cm_sbs_init(void)
 {
-
-	if (acpi_disabled)
-		return 0;
-
-	init_MUTEX(&cm_sbs_sem);
-
 	return 0;
 }
-
 subsys_initcall(acpi_cm_sbs_init);
diff --git a/drivers/acpi/dispatcher/dsinit.c b/drivers/acpi/dispatcher/dsinit.c
index daf51b5..1888c05 100644
--- a/drivers/acpi/dispatcher/dsinit.c
+++ b/drivers/acpi/dispatcher/dsinit.c
@@ -116,16 +116,6 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 
 	case ACPI_TYPE_METHOD:
 
-		/*
-		 * Set the execution data width (32 or 64) based upon the
-		 * revision number of the parent ACPI table.
-		 * TBD: This is really for possible future support of integer width
-		 * on a per-table basis. Currently, we just use a global for the width.
-		 */
-		if (info->table_desc->pointer->revision == 1) {
-			node->flags |= ANOBJ_DATA_WIDTH_32;
-		}
-
 		info->method_count++;
 		break;
 
diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c
index a39a33f..cf888ad 100644
--- a/drivers/acpi/dispatcher/dsmethod.c
+++ b/drivers/acpi/dispatcher/dsmethod.c
@@ -134,7 +134,7 @@ acpi_ds_create_method_mutex(union acpi_operand_object *method_desc)
 	union acpi_operand_object *mutex_desc;
 	acpi_status status;
 
-	ACPI_FUNCTION_NAME(ds_create_method_mutex);
+	ACPI_FUNCTION_TRACE(ds_create_method_mutex);
 
 	/* Create the new mutex object */
 
@@ -493,7 +493,7 @@ acpi_ds_restart_control_method(struct acpi_walk_state *walk_state,
 
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 			  "****Restart [%4.4s] Op %p ReturnValueFromCallee %p\n",
-			  (char *)&walk_state->method_node->name,
+			  acpi_ut_get_node_name(walk_state->method_node),
 			  walk_state->method_call_op, return_desc));
 
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
@@ -610,6 +610,7 @@ acpi_ds_terminate_control_method(union acpi_operand_object *method_desc,
 
 			acpi_os_release_mutex(method_desc->method.mutex->mutex.
 					      os_mutex);
+			method_desc->method.mutex->mutex.owner_thread = NULL;
 		}
 	}
 
@@ -620,27 +621,11 @@ acpi_ds_terminate_control_method(union acpi_operand_object *method_desc,
 		 */
 		method_node = walk_state->method_node;
 
-		/* Lock namespace for possible update */
-
-		status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
-		if (ACPI_FAILURE(status)) {
-			return_VOID;
-		}
-
-		/*
-		 * Delete any namespace entries created immediately underneath
-		 * the method
-		 */
-		if (method_node && method_node->child) {
-			acpi_ns_delete_namespace_subtree(method_node);
-		}
-
 		/*
-		 * Delete any namespace entries created anywhere else within
+		 * Delete any namespace objects created anywhere within
 		 * the namespace by the execution of this method
 		 */
 		acpi_ns_delete_namespace_by_owner(method_desc->method.owner_id);
-		status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 	}
 
 	/* Decrement the thread count on the method */
diff --git a/drivers/acpi/dispatcher/dswexec.c b/drivers/acpi/dispatcher/dswexec.c
index b1ded62..d7a616c 100644
--- a/drivers/acpi/dispatcher/dswexec.c
+++ b/drivers/acpi/dispatcher/dswexec.c
@@ -313,10 +313,10 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state,
 	case AML_CLASS_EXECUTE:
 	case AML_CLASS_CREATE:
 		/*
-		 * Most operators with arguments.
+		 * Most operators with arguments (except create_xxx_field operators)
 		 * Start a new result/operand state
 		 */
-		if (walk_state->opcode != AML_CREATE_FIELD_OP) {
+		if (walk_state->op_info->object_type != ACPI_TYPE_BUFFER_FIELD) {
 			status = acpi_ds_result_stack_push(walk_state);
 		}
 		break;
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 510a945..1c0a39d 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -627,6 +627,7 @@ static int dock_add(acpi_handle handle)
 	INIT_LIST_HEAD(&dock_station->hotplug_devices);
 	spin_lock_init(&dock_station->dd_lock);
 	spin_lock_init(&dock_station->hp_lock);
+	ATOMIC_INIT_NOTIFIER_HEAD(&dock_notifier_list);
 
 	/* Find dependent devices */
 	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 8c5d7df..e5d7963 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -929,7 +929,7 @@ static int acpi_ec_info_open_fs(struct inode *inode, struct file *file)
 	return single_open(file, acpi_ec_read_info, PDE(inode)->data);
 }
 
-static struct file_operations acpi_ec_info_ops = {
+static const struct file_operations acpi_ec_info_ops = {
 	.open = acpi_ec_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c
index a901b23..959a893 100644
--- a/drivers/acpi/event.c
+++ b/drivers/acpi/event.c
@@ -99,7 +99,7 @@ static unsigned int acpi_system_poll_event(struct file *file, poll_table * wait)
 	return 0;
 }
 
-static struct file_operations acpi_system_event_ops = {
+static const struct file_operations acpi_system_event_ops = {
 	.open = acpi_system_open_event,
 	.read = acpi_system_read_event,
 	.release = acpi_system_close_event,
diff --git a/drivers/acpi/events/evregion.c b/drivers/acpi/events/evregion.c
index 094a17e..21caae0 100644
--- a/drivers/acpi/events/evregion.c
+++ b/drivers/acpi/events/evregion.c
@@ -528,34 +528,40 @@ acpi_ev_detach_region(union acpi_operand_object *region_obj,
 				}
 			}
 
-			/* Call the setup handler with the deactivate notification */
+			/*
+			 * If the region has been activated, call the setup handler
+			 * with the deactivate notification
+			 */
+			if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) {
+				region_setup = handler_obj->address_space.setup;
+				status =
+				    region_setup(region_obj,
+						 ACPI_REGION_DEACTIVATE,
+						 handler_obj->address_space.
+						 context, region_context);
 
-			region_setup = handler_obj->address_space.setup;
-			status =
-			    region_setup(region_obj, ACPI_REGION_DEACTIVATE,
-					 handler_obj->address_space.context,
-					 region_context);
+				/* Init routine may fail, Just ignore errors */
 
-			/* Init routine may fail, Just ignore errors */
+				if (ACPI_FAILURE(status)) {
+					ACPI_EXCEPTION((AE_INFO, status,
+							"from region handler - deactivate, [%s]",
+							acpi_ut_get_region_name
+							(region_obj->region.
+							 space_id)));
+				}
 
-			if (ACPI_FAILURE(status)) {
-				ACPI_EXCEPTION((AE_INFO, status,
-						"from region init, [%s]",
-						acpi_ut_get_region_name
-						(region_obj->region.space_id)));
+				region_obj->region.flags &=
+				    ~(AOPOBJ_SETUP_COMPLETE);
 			}
 
-			region_obj->region.flags &= ~(AOPOBJ_SETUP_COMPLETE);
-
 			/*
 			 * Remove handler reference in the region
 			 *
-			 * NOTE: this doesn't mean that the region goes away
-			 * The region is just inaccessible as indicated to
-			 * the _REG method
+			 * NOTE: this doesn't mean that the region goes away, the region
+			 * is just inaccessible as indicated to the _REG method
 			 *
-			 * If the region is on the handler's list
-			 * this better be the region's handler
+			 * If the region is on the handler's list, this must be the
+			 * region's handler
 			 */
 			region_obj->region.handler = NULL;
 			acpi_ut_remove_reference(handler_obj);
diff --git a/drivers/acpi/events/evxface.c b/drivers/acpi/events/evxface.c
index 4f948df..923fd2b 100644
--- a/drivers/acpi/events/evxface.c
+++ b/drivers/acpi/events/evxface.c
@@ -428,7 +428,7 @@ acpi_remove_notify_handler(acpi_handle device,
 	node = acpi_ns_map_handle_to_node(device);
 	if (!node) {
 		status = AE_BAD_PARAMETER;
-		goto unlock;
+		goto unlock_and_exit;
 	}
 
 	/* Root Object */
@@ -442,7 +442,7 @@ acpi_remove_notify_handler(acpi_handle device,
 		    ((handler_type & ACPI_DEVICE_NOTIFY) &&
 		     !acpi_gbl_device_notify.handler)) {
 			status = AE_NOT_EXIST;
-			goto unlock;
+			goto unlock_and_exit;
 		}
 
 		/* Make sure all deferred tasks are completed */
@@ -474,7 +474,7 @@ acpi_remove_notify_handler(acpi_handle device,
 
 		if (!acpi_ev_is_notify_object(node)) {
 			status = AE_TYPE;
-			goto unlock;
+			goto unlock_and_exit;
 		}
 
 		/* Check for an existing internal object */
@@ -482,17 +482,21 @@ acpi_remove_notify_handler(acpi_handle device,
 		obj_desc = acpi_ns_get_attached_object(node);
 		if (!obj_desc) {
 			status = AE_NOT_EXIST;
-			goto unlock;
+			goto unlock_and_exit;
 		}
 
 		/* Object exists - make sure there's an existing handler */
 
 		if (handler_type & ACPI_SYSTEM_NOTIFY) {
 			notify_obj = obj_desc->common_notify.system_notify;
-			if ((!notify_obj) ||
-			    (notify_obj->notify.handler != handler)) {
+			if (!notify_obj) {
+				status = AE_NOT_EXIST;
+				goto unlock_and_exit;
+			}
+
+			if (notify_obj->notify.handler != handler) {
 				status = AE_BAD_PARAMETER;
-				goto unlock;
+				goto unlock_and_exit;
 			}
 			/* Make sure all deferred tasks are completed */
 
@@ -510,10 +514,14 @@ acpi_remove_notify_handler(acpi_handle device,
 
 		if (handler_type & ACPI_DEVICE_NOTIFY) {
 			notify_obj = obj_desc->common_notify.device_notify;
-			if ((!notify_obj) ||
-			    (notify_obj->notify.handler != handler)) {
+			if (!notify_obj) {
+				status = AE_NOT_EXIST;
+				goto unlock_and_exit;
+			}
+
+			if (notify_obj->notify.handler != handler) {
 				status = AE_BAD_PARAMETER;
-				goto unlock;
+				goto unlock_and_exit;
 			}
 			/* Make sure all deferred tasks are completed */
 
@@ -530,9 +538,9 @@ acpi_remove_notify_handler(acpi_handle device,
 		}
 	}
 
-unlock:
+      unlock_and_exit:
 	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
-exit:
+      exit:
 	if (ACPI_FAILURE(status))
 		ACPI_EXCEPTION((AE_INFO, status, "Removing notify handler"));
 	return_ACPI_STATUS(status);
@@ -586,7 +594,7 @@ acpi_install_gpe_handler(acpi_handle gpe_device,
 	gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
 	if (!gpe_event_info) {
 		status = AE_BAD_PARAMETER;
-		goto unlock;
+		goto unlock_and_exit;
 	}
 
 	/* Make sure that there isn't a handler there already */
@@ -594,7 +602,7 @@ acpi_install_gpe_handler(acpi_handle gpe_device,
 	if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
 	    ACPI_GPE_DISPATCH_HANDLER) {
 		status = AE_ALREADY_EXISTS;
-		goto unlock;
+		goto unlock_and_exit;
 	}
 
 	/* Allocate and init handler object */
@@ -602,7 +610,7 @@ acpi_install_gpe_handler(acpi_handle gpe_device,
 	handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_handler_info));
 	if (!handler) {
 		status = AE_NO_MEMORY;
-		goto unlock;
+		goto unlock_and_exit;
 	}
 
 	handler->address = address;
@@ -613,7 +621,7 @@ acpi_install_gpe_handler(acpi_handle gpe_device,
 
 	status = acpi_ev_disable_gpe(gpe_event_info);
 	if (ACPI_FAILURE(status)) {
-		goto unlock;
+		goto unlock_and_exit;
 	}
 
 	/* Install the handler */
@@ -628,9 +636,9 @@ acpi_install_gpe_handler(acpi_handle gpe_device,
 
 	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 
-unlock:
+      unlock_and_exit:
 	(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
-exit:
+      exit:
 	if (ACPI_FAILURE(status))
 		ACPI_EXCEPTION((AE_INFO, status,
 				"Installing notify handler failed"));
diff --git a/drivers/acpi/events/evxfregn.c b/drivers/acpi/events/evxfregn.c
index e8b86a0..83b12a9 100644
--- a/drivers/acpi/events/evxfregn.c
+++ b/drivers/acpi/events/evxfregn.c
@@ -155,7 +155,11 @@ acpi_remove_address_space_handler(acpi_handle device,
 	/* Convert and validate the device handle */
 
 	node = acpi_ns_map_handle_to_node(device);
-	if (!node) {
+	if (!node ||
+	    ((node->type != ACPI_TYPE_DEVICE) &&
+	     (node->type != ACPI_TYPE_PROCESSOR) &&
+	     (node->type != ACPI_TYPE_THERMAL) &&
+	     (node != acpi_gbl_root_node))) {
 		status = AE_BAD_PARAMETER;
 		goto unlock_and_exit;
 	}
@@ -178,6 +182,13 @@ acpi_remove_address_space_handler(acpi_handle device,
 
 		if (handler_obj->address_space.space_id == space_id) {
 
+			/* Handler must be the same as the installed handler */
+
+			if (handler_obj->address_space.handler != handler) {
+				status = AE_BAD_PARAMETER;
+				goto unlock_and_exit;
+			}
+
 			/* Matched space_id, first dereference this in the Regions */
 
 			ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c
index 83fed07..c8341fa 100644
--- a/drivers/acpi/executer/exconfig.c
+++ b/drivers/acpi/executer/exconfig.c
@@ -502,7 +502,6 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
 	 * (Offset contains the table_id)
 	 */
 	acpi_ns_delete_namespace_by_owner(table_info->owner_id);
-	acpi_ut_release_owner_id(&table_info->owner_id);
 
 	/* Delete the table itself */
 
diff --git a/drivers/acpi/executer/exconvrt.c b/drivers/acpi/executer/exconvrt.c
index b732e39..544e81a 100644
--- a/drivers/acpi/executer/exconvrt.c
+++ b/drivers/acpi/executer/exconvrt.c
@@ -170,6 +170,9 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc,
 		return_ACPI_STATUS(AE_NO_MEMORY);
 	}
 
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
+			  ACPI_FORMAT_UINT64(result)));
+
 	/* Save the Result */
 
 	return_desc->integer.value = result;
diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c
index d8ac287..3a39c2e 100644
--- a/drivers/acpi/executer/exmutex.c
+++ b/drivers/acpi/executer/exmutex.c
@@ -267,9 +267,9 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 	    && (obj_desc->mutex.os_mutex != ACPI_GLOBAL_LOCK)) {
 		ACPI_ERROR((AE_INFO,
 			    "Thread %X cannot release Mutex [%4.4s] acquired by thread %X",
-			    walk_state->thread->thread_id,
+			    (u32) walk_state->thread->thread_id,
 			    acpi_ut_get_node_name(obj_desc->mutex.node),
-			    obj_desc->mutex.owner_thread->thread_id));
+			    (u32) obj_desc->mutex.owner_thread->thread_id));
 		return_ACPI_STATUS(AE_AML_NOT_OWNER);
 	}
 
diff --git a/drivers/acpi/executer/exsystem.c b/drivers/acpi/executer/exsystem.c
index 6b5d1e6..28aef3e 100644
--- a/drivers/acpi/executer/exsystem.c
+++ b/drivers/acpi/executer/exsystem.c
@@ -60,7 +60,7 @@ ACPI_MODULE_NAME("exsystem")
  *
  * DESCRIPTION: Implements a semaphore wait with a check to see if the
  *              semaphore is available immediately.  If it is not, the
- *              interpreter is released.
+ *              interpreter is released before waiting.
  *
  ******************************************************************************/
 acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
@@ -110,9 +110,9 @@ acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Implements a semaphore wait with a check to see if the
- *              semaphore is available immediately.  If it is not, the
- *              interpreter is released.
+ * DESCRIPTION: Implements a mutex wait with a check to see if the
+ *              mutex is available immediately.  If it is not, the
+ *              interpreter is released before waiting.
  *
  ******************************************************************************/
 
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index daed246..045c894 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -120,7 +120,7 @@ acpi_fan_write_state(struct file *file, const char __user * buffer,
 	return count;
 }
 
-static struct file_operations acpi_fan_state_ops = {
+static const struct file_operations acpi_fan_state_ops = {
 	.open = acpi_fan_state_open_fs,
 	.read = seq_read,
 	.write = acpi_fan_write_state,
diff --git a/drivers/acpi/hotkey.c b/drivers/acpi/hotkey.c
index fd81a0f..32c9d88 100644
--- a/drivers/acpi/hotkey.c
+++ b/drivers/acpi/hotkey.c
@@ -184,7 +184,7 @@ static union acpi_hotkey *get_hotkey_by_event(struct
 					      *hotkey_list, int event);
 
 /* event based config */
-static struct file_operations hotkey_config_fops = {
+static const struct file_operations hotkey_config_fops = {
 	.open = hotkey_open_config,
 	.read = seq_read,
 	.write = hotkey_write_config,
@@ -193,7 +193,7 @@ static struct file_operations hotkey_config_fops = {
 };
 
 /* polling based config */
-static struct file_operations hotkey_poll_config_fops = {
+static const struct file_operations hotkey_poll_config_fops = {
 	.open = hotkey_poll_open_config,
 	.read = seq_read,
 	.write = hotkey_write_config,
@@ -202,7 +202,7 @@ static struct file_operations hotkey_poll_config_fops = {
 };
 
 /* hotkey driver info */
-static struct file_operations hotkey_info_fops = {
+static const struct file_operations hotkey_info_fops = {
 	.open = hotkey_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -210,7 +210,7 @@ static struct file_operations hotkey_info_fops = {
 };
 
 /* action */
-static struct file_operations hotkey_action_fops = {
+static const struct file_operations hotkey_action_fops = {
 	.open = hotkey_action_open_fs,
 	.read = seq_read,
 	.write = hotkey_execute_aml_method,
@@ -219,7 +219,7 @@ static struct file_operations hotkey_action_fops = {
 };
 
 /* polling results */
-static struct file_operations hotkey_polling_fops = {
+static const struct file_operations hotkey_polling_fops = {
 	.open = hotkey_polling_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/drivers/acpi/namespace/nsalloc.c b/drivers/acpi/namespace/nsalloc.c
index dc3f073..55b407a 100644
--- a/drivers/acpi/namespace/nsalloc.c
+++ b/drivers/acpi/namespace/nsalloc.c
@@ -386,14 +386,17 @@ void acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_node)
  *              specific ID.  Used to delete entire ACPI tables.  All
  *              reference counts are updated.
  *
+ * MUTEX:       Locks namespace during deletion walk.
+ *
  ******************************************************************************/
 
 void acpi_ns_delete_namespace_by_owner(acpi_owner_id owner_id)
 {
 	struct acpi_namespace_node *child_node;
 	struct acpi_namespace_node *deletion_node;
-	u32 level;
 	struct acpi_namespace_node *parent_node;
+	u32 level;
+	acpi_status status;
 
 	ACPI_FUNCTION_TRACE_U32(ns_delete_namespace_by_owner, owner_id);
 
@@ -401,6 +404,13 @@ void acpi_ns_delete_namespace_by_owner(acpi_owner_id owner_id)
 		return_VOID;
 	}
 
+	/* Lock namespace for possible update */
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		return_VOID;
+	}
+
 	deletion_node = NULL;
 	parent_node = acpi_gbl_root_node;
 	child_node = NULL;
@@ -469,5 +479,6 @@ void acpi_ns_delete_namespace_by_owner(acpi_owner_id owner_id)
 		}
 	}
 
+	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 	return_VOID;
 }
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index eedb05c..b7d1514 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -36,7 +36,6 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/nmi.h>
-#include <linux/kthread.h>
 #include <acpi/acpi.h>
 #include <asm/io.h>
 #include <acpi/acpi_bus.h>
@@ -136,16 +135,6 @@ void acpi_os_vprintf(const char *fmt, va_list args)
 #endif
 }
 
-
-extern int acpi_in_resume;
-void *acpi_os_allocate(acpi_size size)
-{
-	if (acpi_in_resume)
-		return kmalloc(size, GFP_ATOMIC);
-	else
-		return kmalloc(size, GFP_KERNEL);
-}
-
 acpi_status acpi_os_get_root_pointer(u32 flags, struct acpi_pointer *addr)
 {
 	if (efi_enabled) {
@@ -593,16 +582,6 @@ static void acpi_os_execute_deferred(void *context)
 	return;
 }
 
-static int acpi_os_execute_thread(void *context)
-{
-	struct acpi_os_dpc *dpc = (struct acpi_os_dpc *)context;
-	if (dpc) {
-		dpc->function(dpc->context);
-		kfree(dpc);
-	}
-	do_exit(0);
-}
-
 /*******************************************************************************
  *
  * FUNCTION:    acpi_os_execute
@@ -624,10 +603,16 @@ acpi_status acpi_os_execute(acpi_execute_type type,
 	acpi_status status = AE_OK;
 	struct acpi_os_dpc *dpc;
 	struct work_struct *task;
-	struct task_struct *p;
+
+	ACPI_FUNCTION_TRACE("os_queue_for_execution");
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+			  "Scheduling function [%p(%p)] for deferred execution.\n",
+			  function, context));
 
 	if (!function)
-		return AE_BAD_PARAMETER;
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+
 	/*
 	 * Allocate/initialize DPC structure.  Note that this memory will be
 	 * freed by the callee.  The kernel handles the tq_struct list  in a
@@ -638,34 +623,27 @@ acpi_status acpi_os_execute(acpi_execute_type type,
 	 * We can save time and code by allocating the DPC and tq_structs
 	 * from the same memory.
 	 */
-	if (type == OSL_NOTIFY_HANDLER) {
-		dpc = kmalloc(sizeof(struct acpi_os_dpc), GFP_KERNEL);
-	} else {
-		dpc = kmalloc(sizeof(struct acpi_os_dpc) +
-				sizeof(struct work_struct), GFP_ATOMIC);
-	}
+
+	dpc =
+	    kmalloc(sizeof(struct acpi_os_dpc) + sizeof(struct work_struct),
+		    GFP_ATOMIC);
 	if (!dpc)
-		return AE_NO_MEMORY;
+		return_ACPI_STATUS(AE_NO_MEMORY);
+
 	dpc->function = function;
 	dpc->context = context;
 
-	if (type == OSL_NOTIFY_HANDLER) {
-		p = kthread_create(acpi_os_execute_thread, dpc, "kacpid_notify");
-		if (!IS_ERR(p)) {
-			wake_up_process(p);
-		} else {
-			status = AE_NO_MEMORY;
-			kfree(dpc);
-		}
-	} else {
-		task = (void *)(dpc + 1);
-		INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc);
-		if (!queue_work(kacpid_wq, task)) {
-			status = AE_ERROR;
-			kfree(dpc);
-		}
+	task = (void *)(dpc + 1);
+	INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc);
+
+	if (!queue_work(kacpid_wq, task)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				  "Call to queue_work() failed.\n"));
+		kfree(dpc);
+		status = AE_ERROR;
 	}
-	return status;
+
+	return_ACPI_STATUS(status);
 }
 
 EXPORT_SYMBOL(acpi_os_execute);
@@ -1115,26 +1093,6 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object)
 	return (AE_OK);
 }
 
-/*******************************************************************************
- *
- * FUNCTION:    acpi_os_acquire_object
- *
- * PARAMETERS:  Cache           - Handle to cache object
- *              ReturnObject    - Where the object is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Return a zero-filled object.
- *
- ******************************************************************************/
-
-void *acpi_os_acquire_object(acpi_cache_t * cache)
-{
-	void *object = kmem_cache_zalloc(cache, GFP_KERNEL);
-	WARN_ON(!object);
-	return object;
-}
-
 /******************************************************************************
  *
  * FUNCTION:    acpi_os_validate_interface
diff --git a/drivers/acpi/parser/psutils.c b/drivers/acpi/parser/psutils.c
index 182474a..d405387 100644
--- a/drivers/acpi/parser/psutils.c
+++ b/drivers/acpi/parser/psutils.c
@@ -139,12 +139,10 @@ union acpi_parse_object *acpi_ps_alloc_op(u16 opcode)
 		/* The generic op (default) is by far the most common (16 to 1) */
 
 		op = acpi_os_acquire_object(acpi_gbl_ps_node_cache);
-		memset(op, 0, sizeof(struct acpi_parse_obj_common));
 	} else {
 		/* Extended parseop */
 
 		op = acpi_os_acquire_object(acpi_gbl_ps_node_ext_cache);
-		memset(op, 0, sizeof(struct acpi_parse_obj_named));
 	}
 
 	/* Initialize the Op */
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 8197c0e..7f3e7e7 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -780,11 +780,6 @@ static int acpi_pci_link_resume(struct acpi_pci_link *link)
 		return 0;
 }
 
-/*
- * FIXME: this is a workaround to avoid nasty warning.  It will be removed
- * after every device calls pci_disable_device in .resume.
- */
-int acpi_in_resume;
 static int irqrouter_resume(struct sys_device *dev)
 {
 	struct list_head *node = NULL;
@@ -794,7 +789,6 @@ static int irqrouter_resume(struct sys_device *dev)
 	/* Make sure SCI is enabled again (Apple firmware bug?) */
 	acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1, ACPI_MTX_DO_NOT_LOCK);
 
-	acpi_in_resume = 1;
 	list_for_each(node, &acpi_link.entries) {
 		link = list_entry(node, struct acpi_pci_link, node);
 		if (!link) {
@@ -803,7 +797,6 @@ static int irqrouter_resume(struct sys_device *dev)
 		}
 		acpi_pci_link_resume(link);
 	}
-	acpi_in_resume = 0;
 	return 0;
 }
 
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 5d3447f..fec225d 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -80,7 +80,7 @@ struct acpi_power_resource {
 
 static struct list_head acpi_power_resource_list;
 
-static struct file_operations acpi_power_fops = {
+static const struct file_operations acpi_power_fops = {
 	.open = acpi_power_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 5267432..b13d644 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -102,7 +102,7 @@ static struct acpi_driver acpi_processor_driver = {
 #define INSTALL_NOTIFY_HANDLER		1
 #define UNINSTALL_NOTIFY_HANDLER	2
 
-static struct file_operations acpi_processor_info_fops = {
+static const struct file_operations acpi_processor_info_fops = {
 	.open = acpi_processor_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 8e9c26a..7106606 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1070,7 +1070,7 @@ static int acpi_processor_power_open_fs(struct inode *inode, struct file *file)
 			   PDE(inode)->data);
 }
 
-static struct file_operations acpi_processor_power_fops = {
+static const struct file_operations acpi_processor_power_fops = {
 	.open = acpi_processor_power_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 4696a85..3496257 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -434,7 +434,7 @@ acpi_system_wakeup_device_open_fs(struct inode *inode, struct file *file)
 			   PDE(inode)->data);
 }
 
-static struct file_operations acpi_system_wakeup_device_fops = {
+static const struct file_operations acpi_system_wakeup_device_fops = {
 	.open = acpi_system_wakeup_device_open_fs,
 	.read = seq_read,
 	.write = acpi_system_write_wakeup_device,
@@ -443,7 +443,7 @@ static struct file_operations acpi_system_wakeup_device_fops = {
 };
 
 #ifdef	CONFIG_ACPI_SLEEP_PROC_SLEEP
-static struct file_operations acpi_system_sleep_fops = {
+static const struct file_operations acpi_system_sleep_fops = {
 	.open = acpi_system_sleep_open_fs,
 	.read = seq_read,
 	.write = acpi_system_write_sleep,
@@ -452,7 +452,7 @@ static struct file_operations acpi_system_sleep_fops = {
 };
 #endif				/* CONFIG_ACPI_SLEEP_PROC_SLEEP */
 
-static struct file_operations acpi_system_alarm_fops = {
+static const struct file_operations acpi_system_alarm_fops = {
 	.open = acpi_system_alarm_open_fs,
 	.read = seq_read,
 	.write = acpi_system_write_alarm,
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index c3bb7faa..d86dcb3 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -57,7 +57,7 @@ static int acpi_system_info_open_fs(struct inode *inode, struct file *file)
 	return single_open(file, acpi_system_read_info, PDE(inode)->data);
 }
 
-static struct file_operations acpi_system_info_ops = {
+static const struct file_operations acpi_system_info_ops = {
 	.open = acpi_system_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -67,7 +67,7 @@ static struct file_operations acpi_system_info_ops = {
 static ssize_t acpi_system_read_dsdt(struct file *, char __user *, size_t,
 				     loff_t *);
 
-static struct file_operations acpi_system_dsdt_ops = {
+static const struct file_operations acpi_system_dsdt_ops = {
 	.read = acpi_system_read_dsdt,
 };
 
@@ -94,7 +94,7 @@ acpi_system_read_dsdt(struct file *file,
 static ssize_t acpi_system_read_fadt(struct file *, char __user *, size_t,
 				     loff_t *);
 
-static struct file_operations acpi_system_fadt_ops = {
+static const struct file_operations acpi_system_fadt_ops = {
 	.read = acpi_system_read_fadt,
 };
 
diff --git a/drivers/acpi/tables/tbget.c b/drivers/acpi/tables/tbget.c
index 99eacce..7856db7 100644
--- a/drivers/acpi/tables/tbget.c
+++ b/drivers/acpi/tables/tbget.c
@@ -320,6 +320,16 @@ acpi_tb_get_this_table(struct acpi_pointer *address,
 
 	ACPI_FUNCTION_TRACE(tb_get_this_table);
 
+	/* Validate minimum length */
+
+	if (header->length < sizeof(struct acpi_table_header)) {
+		ACPI_ERROR((AE_INFO,
+			    "Table length (%X) is smaller than minimum (%X)",
+			    header->length, sizeof(struct acpi_table_header)));
+
+		return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
+	}
+
 	/*
 	 * Flags contains the current processor mode (Virtual or Physical
 	 * addressing) The pointer_type is either Logical or Physical
@@ -356,7 +366,7 @@ acpi_tb_get_this_table(struct acpi_pointer *address,
 		 */
 		status = acpi_os_map_memory(address->pointer.physical,
 					    (acpi_size) header->length,
-					    (void *)&full_table);
+					    ACPI_CAST_PTR(void, &full_table));
 		if (ACPI_FAILURE(status)) {
 			ACPI_ERROR((AE_INFO,
 				    "Could not map memory for table [%4.4s] at %8.8X%8.8X for length %X",
diff --git a/drivers/acpi/tables/tbinstal.c b/drivers/acpi/tables/tbinstal.c
index 7ca2df7..1668a23 100644
--- a/drivers/acpi/tables/tbinstal.c
+++ b/drivers/acpi/tables/tbinstal.c
@@ -256,7 +256,7 @@ acpi_tb_init_table_descriptor(acpi_table_type table_type,
 
 	status = acpi_ut_allocate_owner_id(&table_desc->owner_id);
 	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
+		goto error_exit1;
 	}
 
 	/* Install the table into the global data structure */
@@ -274,8 +274,8 @@ acpi_tb_init_table_descriptor(acpi_table_type table_type,
 		 * at this location, so return an error.
 		 */
 		if (list_head->next) {
-			ACPI_FREE(table_desc);
-			return_ACPI_STATUS(AE_ALREADY_EXISTS);
+			status = AE_ALREADY_EXISTS;
+			goto error_exit2;
 		}
 
 		table_desc->next = list_head->next;
@@ -335,6 +335,17 @@ acpi_tb_init_table_descriptor(acpi_table_type table_type,
 	table_info->owner_id = table_desc->owner_id;
 	table_info->installed_desc = table_desc;
 	return_ACPI_STATUS(AE_OK);
+
+	/* Error exit with cleanup */
+
+      error_exit2:
+
+	acpi_ut_release_owner_id(&table_desc->owner_id);
+
+      error_exit1:
+
+	ACPI_FREE(table_desc);
+	return_ACPI_STATUS(status);
 }
 
 /*******************************************************************************
@@ -525,6 +536,10 @@ struct acpi_table_desc *acpi_tb_uninstall_table(struct acpi_table_desc
 
 	acpi_tb_delete_single_table(table_desc);
 
+	/* Free the owner ID associated with this table */
+
+	acpi_ut_release_owner_id(&table_desc->owner_id);
+
 	/* Free the table descriptor */
 
 	next_desc = table_desc->next;
diff --git a/drivers/acpi/tables/tbrsdt.c b/drivers/acpi/tables/tbrsdt.c
index abcb08c..0ad3dbb 100644
--- a/drivers/acpi/tables/tbrsdt.c
+++ b/drivers/acpi/tables/tbrsdt.c
@@ -183,6 +183,17 @@ acpi_status acpi_tb_validate_rsdt(struct acpi_table_header *table_ptr)
 
 	ACPI_FUNCTION_ENTRY();
 
+	/* Validate minimum length */
+
+	if (table_ptr->length < sizeof(struct acpi_table_header)) {
+		ACPI_ERROR((AE_INFO,
+			    "RSDT/XSDT length (%X) is smaller than minimum (%X)",
+			    table_ptr->length,
+			    sizeof(struct acpi_table_header)));
+
+		return (AE_INVALID_TABLE_LENGTH);
+	}
+
 	/* Search for appropriate signature, RSDT or XSDT */
 
 	if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) {
@@ -210,7 +221,7 @@ acpi_status acpi_tb_validate_rsdt(struct acpi_table_header *table_ptr)
 			ACPI_ERROR((AE_INFO, "Looking for XSDT"));
 		}
 
-		ACPI_DUMP_BUFFER((char *)table_ptr, 48);
+		ACPI_DUMP_BUFFER(ACPI_CAST_PTR(char, table_ptr), 48);
 		return (AE_BAD_SIGNATURE);
 	}
 
@@ -258,7 +269,7 @@ acpi_status acpi_tb_get_table_rsdt(void)
 
 	status = acpi_tb_validate_rsdt(table_info.pointer);
 	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
+		goto error_cleanup;
 	}
 
 	/* Get the number of tables defined in the RSDT or XSDT */
@@ -270,14 +281,14 @@ acpi_status acpi_tb_get_table_rsdt(void)
 
 	status = acpi_tb_convert_to_xsdt(&table_info);
 	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
+		goto error_cleanup;
 	}
 
 	/* Save the table pointers and allocation info */
 
 	status = acpi_tb_init_table_descriptor(ACPI_TABLE_ID_XSDT, &table_info);
 	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
+		goto error_cleanup;
 	}
 
 	acpi_gbl_XSDT =
@@ -285,4 +296,12 @@ acpi_status acpi_tb_get_table_rsdt(void)
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "XSDT located at %p\n", acpi_gbl_XSDT));
 	return_ACPI_STATUS(status);
+
+      error_cleanup:
+
+	/* Free table allocated by acpi_tb_get_table */
+
+	acpi_tb_delete_single_table(&table_info);
+
+	return_ACPI_STATUS(status);
 }
diff --git a/drivers/acpi/tables/tbxface.c b/drivers/acpi/tables/tbxface.c
index 4e91f29..7767987 100644
--- a/drivers/acpi/tables/tbxface.c
+++ b/drivers/acpi/tables/tbxface.c
@@ -134,8 +134,8 @@ ACPI_EXPORT_SYMBOL(acpi_load_tables)
  * RETURN:      Status
  *
  * DESCRIPTION: This function is called to load a table from the caller's
- *              buffer.  The buffer must contain an entire ACPI Table including
- *              a valid header.  The header fields will be verified, and if it
+ *              buffer. The buffer must contain an entire ACPI Table including
+ *              a valid header. The header fields will be verified, and if it
  *              is determined that the table is invalid, the call will fail.
  *
  ******************************************************************************/
@@ -245,15 +245,18 @@ acpi_status acpi_unload_table(acpi_table_type table_type)
 	/* Find all tables of the requested type */
 
 	table_desc = acpi_gbl_table_lists[table_type].next;
+	if (!table_desc) {
+		return_ACPI_STATUS(AE_NOT_EXIST);
+	}
+
 	while (table_desc) {
 		/*
-		 * Delete all namespace entries owned by this table.  Note that these
-		 * entries can appear anywhere in the namespace by virtue of the AML
-		 * "Scope" operator.  Thus, we need to track ownership by an ID, not
+		 * Delete all namespace objects owned by this table. Note that these
+		 * objects can appear anywhere in the namespace by virtue of the AML
+		 * "Scope" operator. Thus, we need to track ownership by an ID, not
 		 * simply a position within the hierarchy
 		 */
 		acpi_ns_delete_namespace_by_owner(table_desc->owner_id);
-		acpi_ut_release_owner_id(&table_desc->owner_id);
 		table_desc = table_desc->next;
 	}
 
@@ -275,12 +278,12 @@ ACPI_EXPORT_SYMBOL(acpi_unload_table)
  *                                see acpi_gbl_acpi_table_flag
  *              out_table_header - pointer to the struct acpi_table_header if successful
  *
- * DESCRIPTION: This function is called to get an ACPI table header.  The caller
+ * DESCRIPTION: This function is called to get an ACPI table header. The caller
  *              supplies an pointer to a data area sufficient to contain an ACPI
  *              struct acpi_table_header structure.
  *
  *              The header contains a length field that can be used to determine
- *              the size of the buffer needed to contain the entire table.  This
+ *              the size of the buffer needed to contain the entire table. This
  *              function is not valid for the RSD PTR table since it does not
  *              have a standard header and is fixed length.
  *
@@ -322,7 +325,8 @@ acpi_get_table_header(acpi_table_type table_type,
 
 	/* Copy the header to the caller's buffer */
 
-	ACPI_MEMCPY((void *)out_table_header, (void *)tbl_ptr,
+	ACPI_MEMCPY(ACPI_CAST_PTR(void, out_table_header),
+		    ACPI_CAST_PTR(void, tbl_ptr),
 		    sizeof(struct acpi_table_header));
 
 	return_ACPI_STATUS(status);
@@ -344,10 +348,10 @@ ACPI_EXPORT_SYMBOL(acpi_get_table_header)
  *
  * RETURN:      Status
  *
- * DESCRIPTION: This function is called to get an ACPI table.  The caller
+ * DESCRIPTION: This function is called to get an ACPI table. The caller
  *              supplies an out_buffer large enough to contain the entire ACPI
- *              table.  The caller should call the acpi_get_table_header function
- *              first to determine the buffer size needed.  Upon completion
+ *              table. The caller should call the acpi_get_table_header function
+ *              first to determine the buffer size needed. Upon completion
  *              the out_buffer->Length field will indicate the number of bytes
  *              copied into the out_buffer->buf_ptr buffer. This table will be
  *              a complete table including the header.
@@ -417,7 +421,9 @@ acpi_get_table(acpi_table_type table_type,
 
 	/* Copy the table to the buffer */
 
-	ACPI_MEMCPY((void *)ret_buffer->pointer, (void *)tbl_ptr, table_length);
+	ACPI_MEMCPY(ACPI_CAST_PTR(void, ret_buffer->pointer),
+		    ACPI_CAST_PTR(void, tbl_ptr), table_length);
+
 	return_ACPI_STATUS(AE_OK);
 }
 
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 503c0b9..5753d06 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -176,21 +176,21 @@ struct acpi_thermal {
 	struct timer_list timer;
 };
 
-static struct file_operations acpi_thermal_state_fops = {
+static const struct file_operations acpi_thermal_state_fops = {
 	.open = acpi_thermal_state_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
 	.release = single_release,
 };
 
-static struct file_operations acpi_thermal_temp_fops = {
+static const struct file_operations acpi_thermal_temp_fops = {
 	.open = acpi_thermal_temp_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
 	.release = single_release,
 };
 
-static struct file_operations acpi_thermal_trip_fops = {
+static const struct file_operations acpi_thermal_trip_fops = {
 	.open = acpi_thermal_trip_open_fs,
 	.read = seq_read,
 	.write = acpi_thermal_write_trip_points,
@@ -198,7 +198,7 @@ static struct file_operations acpi_thermal_trip_fops = {
 	.release = single_release,
 };
 
-static struct file_operations acpi_thermal_cooling_fops = {
+static const struct file_operations acpi_thermal_cooling_fops = {
 	.open = acpi_thermal_cooling_open_fs,
 	.read = seq_read,
 	.write = acpi_thermal_write_cooling_mode,
@@ -206,7 +206,7 @@ static struct file_operations acpi_thermal_cooling_fops = {
 	.release = single_release,
 };
 
-static struct file_operations acpi_thermal_polling_fops = {
+static const struct file_operations acpi_thermal_polling_fops = {
 	.open = acpi_thermal_polling_open_fs,
 	.read = seq_read,
 	.write = acpi_thermal_write_polling,
@@ -1359,13 +1359,28 @@ static int acpi_thermal_remove(struct acpi_device *device, int type)
 static int acpi_thermal_resume(struct acpi_device *device, int state)
 {
 	struct acpi_thermal *tz = NULL;
+	int i;
 
 	if (!device || !acpi_driver_data(device))
 		return -EINVAL;
 
 	tz = (struct acpi_thermal *)acpi_driver_data(device);
 
-	acpi_thermal_check(tz);
+	acpi_thermal_get_temperature(tz);
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		if (tz->trips.active[i].flags.valid) {
+ 			tz->temperature = tz->trips.active[i].temperature;
+			tz->trips.active[i].flags.enabled = 0;
+
+			acpi_thermal_active(tz);
+
+			tz->state.active |= tz->trips.active[i].flags.enabled;
+			tz->state.active_index = i;
+		}
+	}
+
+ 	acpi_thermal_check(tz);
 
 	return AE_OK;
 }
diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c
index 5cff17d..f6cbc0b 100644
--- a/drivers/acpi/utilities/utalloc.c
+++ b/drivers/acpi/utilities/utalloc.c
@@ -285,6 +285,7 @@ acpi_ut_initialize_buffer(struct acpi_buffer * buffer,
 	return (status);
 }
 
+#ifdef NOT_USED_BY_LINUX
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ut_allocate
@@ -360,3 +361,4 @@ void *acpi_ut_allocate_zeroed(acpi_size size,
 
 	return (allocation);
 }
+#endif
diff --git a/drivers/acpi/utilities/utdebug.c b/drivers/acpi/utilities/utdebug.c
index 5ec1cfc..bb1eaf9 100644
--- a/drivers/acpi/utilities/utdebug.c
+++ b/drivers/acpi/utilities/utdebug.c
@@ -47,7 +47,7 @@
 ACPI_MODULE_NAME("utdebug")
 
 #ifdef ACPI_DEBUG_OUTPUT
-static u32 acpi_gbl_prev_thread_id = 0xFFFFFFFF;
+static acpi_thread_id acpi_gbl_prev_thread_id;
 static char *acpi_gbl_fn_entry_str = "----Entry";
 static char *acpi_gbl_fn_exit_str = "----Exit-";
 
@@ -181,7 +181,7 @@ acpi_ut_debug_print(u32 requested_debug_level,
 		if (ACPI_LV_THREADS & acpi_dbg_level) {
 			acpi_os_printf
 			    ("\n**** Context Switch from TID %X to TID %X ****\n\n",
-			     acpi_gbl_prev_thread_id, thread_id);
+			     (u32) acpi_gbl_prev_thread_id, (u32) thread_id);
 		}
 
 		acpi_gbl_prev_thread_id = thread_id;
diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c
index 38ebe1c..9d3f114 100644
--- a/drivers/acpi/utilities/utdelete.c
+++ b/drivers/acpi/utilities/utdelete.c
@@ -447,11 +447,16 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
 		 */
 		switch (ACPI_GET_OBJECT_TYPE(object)) {
 		case ACPI_TYPE_DEVICE:
+		case ACPI_TYPE_PROCESSOR:
+		case ACPI_TYPE_POWER:
+		case ACPI_TYPE_THERMAL:
 
-			acpi_ut_update_ref_count(object->device.system_notify,
-						 action);
-			acpi_ut_update_ref_count(object->device.device_notify,
-						 action);
+			/* Update the notify objects for these types (if present) */
+
+			acpi_ut_update_ref_count(object->common_notify.
+						 system_notify, action);
+			acpi_ut_update_ref_count(object->common_notify.
+						 device_notify, action);
 			break;
 
 		case ACPI_TYPE_PACKAGE:
diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c
index 3326831..6d8a821 100644
--- a/drivers/acpi/utilities/utmisc.c
+++ b/drivers/acpi/utilities/utmisc.c
@@ -65,7 +65,7 @@ ACPI_MODULE_NAME("utmisc")
 u8 acpi_ut_is_aml_table(struct acpi_table_header *table)
 {
 
-	/* Ignore tables that contain AML */
+	/* These are the only tables that contain executable AML */
 
 	if (ACPI_COMPARE_NAME(table->signature, DSDT_SIG) ||
 	    ACPI_COMPARE_NAME(table->signature, PSDT_SIG) ||
@@ -419,10 +419,15 @@ void acpi_ut_set_integer_width(u8 revision)
 {
 
 	if (revision <= 1) {
+
+		/* 32-bit case */
+
 		acpi_gbl_integer_bit_width = 32;
 		acpi_gbl_integer_nybble_width = 8;
 		acpi_gbl_integer_byte_width = 4;
 	} else {
+		/* 64-bit case (ACPI 2.0+) */
+
 		acpi_gbl_integer_bit_width = 64;
 		acpi_gbl_integer_nybble_width = 16;
 		acpi_gbl_integer_byte_width = 8;
@@ -502,6 +507,7 @@ acpi_ut_display_init_pathname(u8 type,
  * FUNCTION:    acpi_ut_valid_acpi_char
  *
  * PARAMETERS:  Char            - The character to be examined
+ *              Position        - Byte position (0-3)
  *
  * RETURN:      TRUE if the character is valid, FALSE otherwise
  *
@@ -609,7 +615,9 @@ acpi_name acpi_ut_repair_name(acpi_name name)
  *
  * RETURN:      Status and Converted value
  *
- * DESCRIPTION: Convert a string into an unsigned value.
+ * DESCRIPTION: Convert a string into an unsigned value. Performs either a
+ *              32-bit or 64-bit conversion, depending on the current mode
+ *              of the interpreter.
  *              NOTE: Does not support Octal strings, not needed.
  *
  ******************************************************************************/
@@ -627,7 +635,7 @@ acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer)
 	u8 sign_of0x = 0;
 	u8 term = 0;
 
-	ACPI_FUNCTION_TRACE(ut_stroul64);
+	ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
 
 	switch (base) {
 	case ACPI_ANY_BASE:
@@ -675,11 +683,13 @@ acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer)
 		}
 	}
 
+	/*
+	 * Perform a 32-bit or 64-bit conversion, depending upon the current
+	 * execution mode of the interpreter
+	 */
 	dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
 
-	/* At least one character in the string here */
-
-	/* Main loop: convert the string to a 64-bit integer */
+	/* Main loop: convert the string to a 32- or 64-bit integer */
 
 	while (*string) {
 		if (ACPI_IS_DIGIT(*string)) {
@@ -754,6 +764,9 @@ acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer)
 
       all_done:
 
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
+			  ACPI_FORMAT_UINT64(return_value)));
+
 	*ret_integer = return_value;
 	return_ACPI_STATUS(AE_OK);
 
diff --git a/drivers/acpi/utilities/utmutex.c b/drivers/acpi/utilities/utmutex.c
index dfc8f30..c39062a 100644
--- a/drivers/acpi/utilities/utmutex.c
+++ b/drivers/acpi/utilities/utmutex.c
@@ -244,14 +244,14 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id)
 
 	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
 			  "Thread %X attempting to acquire Mutex [%s]\n",
-			  this_thread_id, acpi_ut_get_mutex_name(mutex_id)));
+			  (u32) this_thread_id, acpi_ut_get_mutex_name(mutex_id)));
 
 	status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex,
 				       ACPI_WAIT_FOREVER);
 	if (ACPI_SUCCESS(status)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
 				  "Thread %X acquired Mutex [%s]\n",
-				  this_thread_id,
+				  (u32) this_thread_id,
 				  acpi_ut_get_mutex_name(mutex_id)));
 
 		acpi_gbl_mutex_info[mutex_id].use_count++;
@@ -259,7 +259,7 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id)
 	} else {
 		ACPI_EXCEPTION((AE_INFO, status,
 				"Thread %X could not acquire Mutex [%X]",
-				this_thread_id, mutex_id));
+				(u32) this_thread_id, mutex_id));
 	}
 
 	return (status);
@@ -285,7 +285,7 @@ acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id)
 
 	this_thread_id = acpi_os_get_thread_id();
 	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
-			  "Thread %X releasing Mutex [%s]\n", this_thread_id,
+			  "Thread %X releasing Mutex [%s]\n", (u32) this_thread_id,
 			  acpi_ut_get_mutex_name(mutex_id)));
 
 	if (mutex_id > ACPI_MAX_MUTEX) {
diff --git a/drivers/acpi/utilities/utstate.c b/drivers/acpi/utilities/utstate.c
index 0f5c5bb..eaa13d0 100644
--- a/drivers/acpi/utilities/utstate.c
+++ b/drivers/acpi/utilities/utstate.c
@@ -199,6 +199,13 @@ struct acpi_thread_state *acpi_ut_create_thread_state(void)
 	state->common.descriptor_type = ACPI_DESC_TYPE_STATE_THREAD;
 	state->thread.thread_id = acpi_os_get_thread_id();
 
+	/* Check for invalid thread ID - zero is very bad, it will break things */
+
+	if (!state->thread.thread_id) {
+		ACPI_ERROR((AE_INFO, "Invalid zero ID from AcpiOsGetThreadId"));
+		state->thread.thread_id = (acpi_thread_id) 1;
+	}
+
 	return_PTR((struct acpi_thread_state *)state);
 }
 
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index 01a9f1c..cfa5af8 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -398,7 +398,7 @@ config ATM_FORE200E_USE_TASKLET
 	default n
 	help
 	  This defers work to be done by the interrupt handler to a
-	  tasklet instead of hanlding everything at interrupt time.  This
+	  tasklet instead of handling everything at interrupt time.  This
 	  may improve the responsive of the host.
 
 config ATM_FORE200E_TX_RETRY
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 80502dc..0b4e224 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -20,7 +20,7 @@ config PREVENT_FIRMWARE_BUILD
 
 config FW_LOADER
 	tristate "Userspace firmware loading support"
-	select HOTPLUG
+	depends on HOTPLUG
 	---help---
 	  This option is provided for the case where no in-kernel-tree modules
 	  require userspace firmware loading support, but a module built outside
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 83fa8b2..2e954d0 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -129,7 +129,7 @@ static struct kobj_type ktype_bus = {
 
 };
 
-decl_subsys(bus, &ktype_bus, NULL);
+static decl_subsys(bus, &ktype_bus, NULL);
 
 
 #ifdef CONFIG_HOTPLUG
@@ -598,12 +598,13 @@ void put_bus(struct bus_type * bus)
  *
  *	Note that kset_find_obj increments bus' reference count.
  */
-
+#if 0
 struct bus_type * find_bus(char * name)
 {
 	struct kobject * k = kset_find_obj(&bus_subsys.kset, name);
 	return k ? to_bus(k) : NULL;
 }
+#endif  /*  0  */
 
 
 /**
diff --git a/drivers/base/core.c b/drivers/base/core.c
index b21f864..be6b5bc 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -559,20 +559,20 @@ static void device_create_release(struct device *dev)
 
 /**
  * device_create - creates a device and registers it with sysfs
- * @cs: pointer to the struct class that this device should be registered to.
- * @parent: pointer to the parent struct device of this new device, if any.
- * @dev: the dev_t for the char device to be added.
- * @fmt: string for the class device's name
+ * @class: pointer to the struct class that this device should be registered to
+ * @parent: pointer to the parent struct device of this new device, if any
+ * @devt: the dev_t for the char device to be added
+ * @fmt: string for the device's name
+ *
+ * This function can be used by char device classes.  A struct device
+ * will be created in sysfs, registered to the specified class.
  *
- * This function can be used by char device classes.  A struct
- * device will be created in sysfs, registered to the specified
- * class.
  * A "dev" file will be created, showing the dev_t for the device, if
  * the dev_t is not 0,0.
- * If a pointer to a parent struct device is passed in, the newly
- * created struct device will be a child of that device in sysfs.  The
- * pointer to the struct device will be returned from the call.  Any
- * further sysfs files that might be required can be created using this
+ * If a pointer to a parent struct device is passed in, the newly created
+ * struct device will be a child of that device in sysfs.
+ * The pointer to the struct device will be returned from the call.
+ * Any further sysfs files that might be required can be created using this
  * pointer.
  *
  * Note: the struct class passed to this function must have previously
@@ -620,11 +620,11 @@ EXPORT_SYMBOL_GPL(device_create);
 
 /**
  * device_destroy - removes a device that was created with device_create()
- * @class: the pointer to the struct class that this device was registered * with.
- * @dev: the dev_t of the device that was previously registered.
+ * @class: pointer to the struct class that this device was registered with
+ * @devt: the dev_t of the device that was previously registered
  *
- * This call unregisters and cleans up a class device that was created with a
- * call to class_device_create()
+ * This call unregisters and cleans up a device that was created with a
+ * call to device_create().
  */
 void device_destroy(struct class *class, dev_t devt)
 {
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 93d9474..b5382ce 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -400,6 +400,16 @@ config BLK_DEV_RAM_SIZE
 	  what are you doing. If you are using IBM S/390, then set this to
 	  8192.
 
+config BLK_DEV_RAM_BLOCKSIZE
+	int "Default RAM disk block size (bytes)"
+	depends on BLK_DEV_RAM
+	default "1024"
+	help
+	  The default value is 1024 kilobytes.  PAGE_SIZE is a much more
+	  efficient choice however.  The default is kept to ensure initrd
+	  setups function - apparently needed by the rd_load_image routine
+	  that supposes the filesystem in the image uses a 1024 blocksize.
+
 config BLK_DEV_INITRD
 	bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
 	depends on BROKEN || !FRV
diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index 5327f55..1bc1cf9 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -162,7 +162,7 @@ aoechr_open(struct inode *inode, struct file *filp)
 {
 	int n, i;
 
-	n = MINOR(inode->i_rdev);
+	n = iminor(inode);
 	filp->private_data = (void *) (unsigned long) n;
 
 	for (i = 0; i < ARRAY_SIZE(chardevs); ++i)
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 757f42d..78082ed 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -1739,8 +1739,6 @@ static void getgeometry(int ctlr)
 	     (log_index < id_ctlr_buf->nr_drvs)
 	     && (log_unit < NWD);
 	     log_unit++) {
-		struct gendisk *disk = ida_gendisk[ctlr][log_unit];
-
 		size = sizeof(sense_log_drv_stat_t);
 
 		/*
diff --git a/drivers/block/rd.c b/drivers/block/rd.c
index 3cf246a..a3f64bf 100644
--- a/drivers/block/rd.c
+++ b/drivers/block/rd.c
@@ -84,7 +84,7 @@ int rd_size = CONFIG_BLK_DEV_RAM_SIZE;		/* Size of the RAM disks */
  * behaviour. The default is still BLOCK_SIZE (needed by rd_load_image that
  * supposes the filesystem in the image uses a BLOCK_SIZE blocksize).
  */
-static int rd_blocksize = BLOCK_SIZE;		/* blocksize of the RAM disks */
+static int rd_blocksize = CONFIG_BLK_DEV_RAM_BLOCKSIZE;
 
 /*
  * Copyright (C) 2000 Linus Torvalds.
diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
index 6f67141..13ba729 100644
--- a/drivers/bluetooth/bcm203x.c
+++ b/drivers/bluetooth/bcm203x.c
@@ -234,6 +234,7 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id
 	data->fw_data = kmalloc(firmware->size, GFP_KERNEL);
 	if (!data->fw_data) {
 		BT_ERR("Can't allocate memory for firmware image");
+		release_firmware(firmware);
 		usb_free_urb(data->urb);
 		kfree(data->buffer);
 		kfree(data);
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 1994270..93ba25b 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -191,7 +191,7 @@ static int hci_uart_flush(struct hci_dev *hdev)
 
 	/* Flush any pending characters in the driver and discipline. */
 	tty_ldisc_flush(tty);
-	if (tty->driver->flush_buffer)
+	if (tty->driver && tty->driver->flush_buffer)
 		tty->driver->flush_buffer(tty);
 
 	if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
@@ -290,7 +290,7 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	if (tty->ldisc.flush_buffer)
 		tty->ldisc.flush_buffer(tty);
 
-	if (tty->driver->flush_buffer)
+	if (tty->driver && tty->driver->flush_buffer)
 		tty->driver->flush_buffer(tty);
 
 	return 0;
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index ca27ee8..d239cf8 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -1837,7 +1837,7 @@ static int dvd_read_bca(struct cdrom_device_info *cdi, dvd_struct *s)
 	init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ);
 	cgc.cmd[0] = GPCMD_READ_DVD_STRUCTURE;
 	cgc.cmd[7] = s->type;
-	cgc.cmd[9] = cgc.buflen = 0xff;
+	cgc.cmd[9] = cgc.buflen & 0xff;
 
 	if ((ret = cdo->generic_packet(cdi, &cgc)))
 		return ret;
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index 56612a2..41db806 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -1299,7 +1299,7 @@ static int __init hvsi_console_init(void)
 		hp->inbuf_end = hp->inbuf;
 		hp->state = HVSI_CLOSED;
 		hp->vtermno = *vtermno;
-		hp->virq = irq_create_mapping(NULL, irq[0], 0);
+		hp->virq = irq_create_mapping(NULL, irq[0]);
 		if (hp->virq == NO_IRQ) {
 			printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n",
 				__FUNCTION__, irq[0]);
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 518ece7..7907ae8 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -3186,3 +3186,10 @@ ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned lo
 
 
 MODULE_LICENSE("GPL");
+
+static struct pci_device_id ip2main_pci_tbl[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl);
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index e97c32c..917b204 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -95,7 +95,7 @@ static inline int valid_phys_addr_range(unsigned long addr, size_t count)
 	return 1;
 }
 
-static inline int valid_mmap_phys_addr_range(unsigned long addr, size_t size)
+static inline int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
 {
 	return 1;
 }
@@ -242,7 +242,7 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
 {
 	size_t size = vma->vm_end - vma->vm_start;
 
-	if (!valid_mmap_phys_addr_range(vma->vm_pgoff << PAGE_SHIFT, size))
+	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
 		return -EINVAL;
 
 	vma->vm_page_prot = phys_mem_access_prot(file, vma->vm_pgoff,
diff --git a/drivers/char/nsc_gpio.c b/drivers/char/nsc_gpio.c
index 5b91e4e..7719bd7 100644
--- a/drivers/char/nsc_gpio.c
+++ b/drivers/char/nsc_gpio.c
@@ -68,13 +68,11 @@ ssize_t nsc_gpio_write(struct file *file, const char __user *data,
 			amp->gpio_config(m, ~1, 0);
 			break;
 		case 'T':
-			dev_dbg(dev, "GPIO%d output is push pull\n",
-			       m);
+			dev_dbg(dev, "GPIO%d output is push pull\n", m);
 			amp->gpio_config(m, ~2, 2);
 			break;
 		case 't':
-			dev_dbg(dev, "GPIO%d output is open drain\n",
-			       m);
+			dev_dbg(dev, "GPIO%d output is open drain\n", m);
 			amp->gpio_config(m, ~2, 0);
 			break;
 		case 'P':
diff --git a/drivers/char/pc8736x_gpio.c b/drivers/char/pc8736x_gpio.c
index 4005ee0..645eb81 100644
--- a/drivers/char/pc8736x_gpio.c
+++ b/drivers/char/pc8736x_gpio.c
@@ -3,18 +3,18 @@
    National Semiconductor PC8736x GPIO driver.  Allows a user space
    process to play with the GPIO pins.
 
-   Copyright (c) 2005 Jim Cromie <jim.cromie@gmail.com>
+   Copyright (c) 2005,2006 Jim Cromie <jim.cromie@gmail.com>
 
    adapted from linux/drivers/char/scx200_gpio.c
    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>,
 */
 
-#include <linux/config.h>
 #include <linux/fs.h>
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/cdev.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/mutex.h>
@@ -25,7 +25,7 @@
 #define DEVNAME "pc8736x_gpio"
 
 MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
-MODULE_DESCRIPTION("NatSemi PC-8736x GPIO Pin Driver");
+MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver");
 MODULE_LICENSE("GPL");
 
 static int major;		/* default to dynamic major */
@@ -38,14 +38,14 @@ static u8 pc8736x_gpio_shadow[4];
 
 #define SIO_BASE1       0x2E	/* 1st command-reg to check */
 #define SIO_BASE2       0x4E	/* alt command-reg to check */
-#define SIO_BASE_OFFSET 0x20
 
 #define SIO_SID		0x20	/* SuperI/O ID Register */
 #define SIO_SID_VALUE	0xe9	/* Expected value in SuperI/O ID Register */
 
 #define SIO_CF1		0x21	/* chip config, bit0 is chip enable */
 
-#define PC8736X_GPIO_SIZE	16
+#define PC8736X_GPIO_RANGE	16 /* ioaddr range */
+#define PC8736X_GPIO_CT		32 /* minors matching 4 8 bit ports */
 
 #define SIO_UNIT_SEL	0x7	/* unit select reg */
 #define SIO_UNIT_ACT	0x30	/* unit enable */
@@ -212,31 +212,30 @@ static void pc8736x_gpio_change(unsigned index)
 	pc8736x_gpio_set(index, !pc8736x_gpio_current(index));
 }
 
-static struct nsc_gpio_ops pc8736x_access = {
+static struct nsc_gpio_ops pc8736x_gpio_ops = {
 	.owner		= THIS_MODULE,
 	.gpio_config	= pc8736x_gpio_configure,
 	.gpio_dump	= nsc_gpio_dump,
 	.gpio_get	= pc8736x_gpio_get,
 	.gpio_set	= pc8736x_gpio_set,
-	.gpio_set_high	= pc8736x_gpio_set_high,
-	.gpio_set_low	= pc8736x_gpio_set_low,
 	.gpio_change	= pc8736x_gpio_change,
 	.gpio_current	= pc8736x_gpio_current
 };
+EXPORT_SYMBOL(pc8736x_gpio_ops);
 
 static int pc8736x_gpio_open(struct inode *inode, struct file *file)
 {
 	unsigned m = iminor(inode);
-	file->private_data = &pc8736x_access;
+	file->private_data = &pc8736x_gpio_ops;
 
 	dev_dbg(&pdev->dev, "open %d\n", m);
 
-	if (m > 63)
+	if (m >= PC8736X_GPIO_CT)
 		return -EINVAL;
 	return nonseekable_open(inode, file);
 }
 
-static const struct file_operations pc8736x_gpio_fops = {
+static const struct file_operations pc8736x_gpio_fileops = {
 	.owner	= THIS_MODULE,
 	.open	= pc8736x_gpio_open,
 	.write	= nsc_gpio_write,
@@ -255,9 +254,12 @@ static void __init pc8736x_init_shadow(void)
 
 }
 
+static struct cdev pc8736x_gpio_cdev;
+
 static int __init pc8736x_gpio_init(void)
 {
-	int rc = 0;
+	int rc;
+	dev_t devid;
 
 	pdev = platform_device_alloc(DEVNAME, 0);
 	if (!pdev)
@@ -275,7 +277,7 @@ static int __init pc8736x_gpio_init(void)
 		dev_err(&pdev->dev, "no device found\n");
 		goto undo_platform_dev_add;
 	}
-	pc8736x_access.dev = &pdev->dev;
+	pc8736x_gpio_ops.dev = &pdev->dev;
 
 	/* Verify that chip and it's GPIO unit are both enabled.
 	   My BIOS does this, so I take minimum action here
@@ -297,7 +299,7 @@ static int __init pc8736x_gpio_init(void)
 	pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8
 			     | superio_inb(SIO_BASE_LADDR));
 
-	if (!request_region(pc8736x_gpio_base, 16, DEVNAME)) {
+	if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) {
 		rc = -ENODEV;
 		dev_err(&pdev->dev, "GPIO ioport %x busy\n",
 			pc8736x_gpio_base);
@@ -305,10 +307,17 @@ static int __init pc8736x_gpio_init(void)
 	}
 	dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base);
 
-	rc = register_chrdev(major, DEVNAME, &pc8736x_gpio_fops);
+	if (major) {
+		devid = MKDEV(major, 0);
+		rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME);
+	} else {
+		rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME);
+		major = MAJOR(devid);
+	}
+
 	if (rc < 0) {
 		dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc);
-		goto undo_platform_dev_add;
+		goto undo_request_region;
 	}
 	if (!major) {
 		major = rc;
@@ -316,8 +325,15 @@ static int __init pc8736x_gpio_init(void)
 	}
 
 	pc8736x_init_shadow();
+
+	/* ignore minor errs, and succeed */
+	cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops);
+	cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT);
+
 	return 0;
 
+undo_request_region:
+	release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
 undo_platform_dev_add:
 	platform_device_del(pdev);
 undo_platform_dev_alloc:
@@ -328,14 +344,15 @@ undo_platform_dev_alloc:
 
 static void __exit pc8736x_gpio_cleanup(void)
 {
-	dev_dbg(&pdev->dev, " cleanup\n");
+	dev_dbg(&pdev->dev, "cleanup\n");
 
-	release_region(pc8736x_gpio_base, 16);
+	cdev_del(&pc8736x_gpio_cdev);
+	unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT);
+	release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
 
-	unregister_chrdev(major, DEVNAME);
+	platform_device_del(pdev);
+	platform_device_put(pdev);
 }
 
-EXPORT_SYMBOL(pc8736x_access);
-
 module_init(pc8736x_gpio_init);
 module_exit(pc8736x_gpio_cleanup);
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index cc7bd1a..6e6a7c7 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -46,13 +46,12 @@
  *      1.11a   Daniele Bellucci: Audit create_proc_read_entry in rtc_init
  *	1.12	Venkatesh Pallipadi: Hooks for emulating rtc on HPET base-timer
  *		CONFIG_HPET_EMULATE_RTC
+ *	1.12a	Maciej W. Rozycki: Handle memory-mapped chips properly.
  *	1.12ac	Alan Cox: Allow read access to the day of week register
  */
 
 #define RTC_VERSION		"1.12ac"
 
-#define RTC_IO_EXTENT	0x8
-
 /*
  *	Note that *all* calls to CMOS_READ and CMOS_WRITE are done with
  *	interrupts disabled. Due to the index-port/data-port (0x70/0x71)
@@ -337,7 +336,15 @@ static ssize_t rtc_read(struct file *file, char __user *buf,
 	if (rtc_has_irq == 0)
 		return -EIO;
 
-	if (count < sizeof(unsigned))
+	/*
+	 * Historically this function used to assume that sizeof(unsigned long)
+	 * is the same in userspace and kernelspace.  This lead to problems
+	 * for configurations with multiple ABIs such a the MIPS o32 and 64
+	 * ABIs supported on the same kernel.  So now we support read of both
+	 * 4 and 8 bytes and assume that's the sizeof(unsigned long) in the
+	 * userspace ABI.
+	 */
+	if (count != sizeof(unsigned int) && count !=  sizeof(unsigned long))
 		return -EINVAL;
 
 	add_wait_queue(&rtc_wait, &wait);
@@ -368,10 +375,12 @@ static ssize_t rtc_read(struct file *file, char __user *buf,
 		schedule();
 	} while (1);
 
-	if (count < sizeof(unsigned long))
-		retval = put_user(data, (unsigned int __user *)buf) ?: sizeof(int); 
+	if (count == sizeof(unsigned int))
+		retval = put_user(data, (unsigned int __user *)buf) ?: sizeof(int);
 	else
 		retval = put_user(data, (unsigned long __user *)buf) ?: sizeof(long);
+	if (!retval)
+		retval = count;
  out:
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&rtc_wait, &wait);
@@ -923,6 +932,9 @@ static int __init rtc_init(void)
 	struct sparc_isa_device *isa_dev;
 #endif
 #endif
+#ifndef __sparc__
+	void *r;
+#endif
 
 #ifdef __sparc__
 	for_each_ebus(ebus) {
@@ -964,8 +976,13 @@ found:
 	}
 no_irq:
 #else
-	if (!request_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc")) {
-		printk(KERN_ERR "rtc: I/O port %d is not free.\n", RTC_PORT (0));
+	if (RTC_IOMAPPED)
+		r = request_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc");
+	else
+		r = request_mem_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc");
+	if (!r) {
+		printk(KERN_ERR "rtc: I/O resource %lx is not free.\n",
+		       (long)(RTC_PORT(0)));
 		return -EIO;
 	}
 
@@ -979,7 +996,10 @@ no_irq:
 	if(request_irq(RTC_IRQ, rtc_int_handler_ptr, IRQF_DISABLED, "rtc", NULL)) {
 		/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
 		printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
-		release_region(RTC_PORT(0), RTC_IO_EXTENT);
+		if (RTC_IOMAPPED)
+			release_region(RTC_PORT(0), RTC_IO_EXTENT);
+		else
+			release_mem_region(RTC_PORT(0), RTC_IO_EXTENT);
 		return -EIO;
 	}
 	hpet_rtc_timer_init();
@@ -1079,7 +1099,10 @@ static void __exit rtc_exit (void)
 	if (rtc_has_irq)
 		free_irq (rtc_irq, &rtc_port);
 #else
-	release_region (RTC_PORT (0), RTC_IO_EXTENT);
+	if (RTC_IOMAPPED)
+		release_region(RTC_PORT(0), RTC_IO_EXTENT);
+	else
+		release_mem_region(RTC_PORT(0), RTC_IO_EXTENT);
 #ifdef RTC_IRQ
 	if (rtc_has_irq)
 		free_irq (RTC_IRQ, NULL);
@@ -1222,7 +1245,7 @@ static int rtc_proc_open(struct inode *inode, struct file *file)
 
 void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 {
-	unsigned long uip_watchdog = jiffies;
+	unsigned long uip_watchdog = jiffies, flags;
 	unsigned char ctrl;
 #ifdef CONFIG_MACH_DECSTATION
 	unsigned int real_year;
@@ -1249,7 +1272,7 @@ void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 	 * RTC has RTC_DAY_OF_WEEK, we should usually ignore it, as it is
 	 * only updated by the RTC when initially set to a non-zero value.
 	 */
-	spin_lock_irq(&rtc_lock);
+	spin_lock_irqsave(&rtc_lock, flags);
 	rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
 	rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
 	rtc_tm->tm_hour = CMOS_READ(RTC_HOURS);
@@ -1263,7 +1286,7 @@ void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 	real_year = CMOS_READ(RTC_DEC_YEAR);
 #endif
 	ctrl = CMOS_READ(RTC_CONTROL);
-	spin_unlock_irq(&rtc_lock);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
 	{
diff --git a/drivers/char/scx200_gpio.c b/drivers/char/scx200_gpio.c
index 425c587..b956c7b 100644
--- a/drivers/char/scx200_gpio.c
+++ b/drivers/char/scx200_gpio.c
@@ -5,7 +5,6 @@
 
    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> */
 
-#include <linux/config.h>
 #include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/module.h>
@@ -22,37 +21,37 @@
 #include <linux/scx200_gpio.h>
 #include <linux/nsc_gpio.h>
 
-#define NAME "scx200_gpio"
-#define DEVNAME NAME
+#define DRVNAME "scx200_gpio"
 
 static struct platform_device *pdev;
 
 MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
-MODULE_DESCRIPTION("NatSemi SCx200 GPIO Pin Driver");
+MODULE_DESCRIPTION("NatSemi/AMD SCx200 GPIO Pin Driver");
 MODULE_LICENSE("GPL");
 
 static int major = 0;		/* default to dynamic major */
 module_param(major, int, 0);
 MODULE_PARM_DESC(major, "Major device number");
 
-struct nsc_gpio_ops scx200_access = {
+#define MAX_PINS 32		/* 64 later, when known ok */
+
+struct nsc_gpio_ops scx200_gpio_ops = {
 	.owner		= THIS_MODULE,
 	.gpio_config	= scx200_gpio_configure,
 	.gpio_dump	= nsc_gpio_dump,
 	.gpio_get	= scx200_gpio_get,
 	.gpio_set	= scx200_gpio_set,
-	.gpio_set_high	= scx200_gpio_set_high,
-	.gpio_set_low	= scx200_gpio_set_low,
 	.gpio_change	= scx200_gpio_change,
 	.gpio_current	= scx200_gpio_current
 };
+EXPORT_SYMBOL(scx200_gpio_ops);
 
 static int scx200_gpio_open(struct inode *inode, struct file *file)
 {
 	unsigned m = iminor(inode);
-	file->private_data = &scx200_access;
+	file->private_data = &scx200_gpio_ops;
 
-	if (m > 63)
+	if (m >= MAX_PINS)
 		return -EINVAL;
 	return nonseekable_open(inode, file);
 }
@@ -62,8 +61,7 @@ static int scx200_gpio_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-
-static const struct file_operations scx200_gpio_fops = {
+static const struct file_operations scx200_gpio_fileops = {
 	.owner   = THIS_MODULE,
 	.write   = nsc_gpio_write,
 	.read    = nsc_gpio_read,
@@ -71,21 +69,20 @@ static const struct file_operations scx200_gpio_fops = {
 	.release = scx200_gpio_release,
 };
 
-struct cdev *scx200_devices;
-static int num_pins = 32;
+struct cdev scx200_gpio_cdev;  /* use 1 cdev for all pins */
 
 static int __init scx200_gpio_init(void)
 {
-	int rc, i;
-	dev_t dev = MKDEV(major, 0);
+	int rc;
+	dev_t devid;
 
 	if (!scx200_gpio_present()) {
-		printk(KERN_ERR NAME ": no SCx200 gpio present\n");
+		printk(KERN_ERR DRVNAME ": no SCx200 gpio present\n");
 		return -ENODEV;
 	}
 
 	/* support dev_dbg() with pdev->dev */
-	pdev = platform_device_alloc(DEVNAME, 0);
+	pdev = platform_device_alloc(DRVNAME, 0);
 	if (!pdev)
 		return -ENOMEM;
 
@@ -94,37 +91,25 @@ static int __init scx200_gpio_init(void)
 		goto undo_malloc;
 
 	/* nsc_gpio uses dev_dbg(), so needs this */
-	scx200_access.dev = &pdev->dev;
-
-	if (major)
-		rc = register_chrdev_region(dev, num_pins, "scx200_gpio");
-	else {
-		rc = alloc_chrdev_region(&dev, 0, num_pins, "scx200_gpio");
-		major = MAJOR(dev);
+	scx200_gpio_ops.dev = &pdev->dev;
+
+	if (major) {
+		devid = MKDEV(major, 0);
+		rc = register_chrdev_region(devid, MAX_PINS, "scx200_gpio");
+	} else {
+		rc = alloc_chrdev_region(&devid, 0, MAX_PINS, "scx200_gpio");
+		major = MAJOR(devid);
 	}
 	if (rc < 0) {
 		dev_err(&pdev->dev, "SCx200 chrdev_region err: %d\n", rc);
 		goto undo_platform_device_add;
 	}
-	scx200_devices = kzalloc(num_pins * sizeof(struct cdev), GFP_KERNEL);
-	if (!scx200_devices) {
-		rc = -ENOMEM;
-		goto undo_chrdev_region;
-	}
-	for (i = 0; i < num_pins; i++) {
-		struct cdev *cdev = &scx200_devices[i];
-		cdev_init(cdev, &scx200_gpio_fops);
-		cdev->owner = THIS_MODULE;
-		rc = cdev_add(cdev, MKDEV(major, i), 1);
-		/* tolerate 'minor' errors */
-		if (rc)
-			dev_err(&pdev->dev, "Error %d on minor %d", rc, i);
-	}
+
+	cdev_init(&scx200_gpio_cdev, &scx200_gpio_fileops);
+	cdev_add(&scx200_gpio_cdev, devid, MAX_PINS);
 
 	return 0; /* succeed */
 
-undo_chrdev_region:
-	unregister_chrdev_region(dev, num_pins);
 undo_platform_device_add:
 	platform_device_del(pdev);
 undo_malloc:
@@ -135,10 +120,11 @@ undo_malloc:
 
 static void __exit scx200_gpio_cleanup(void)
 {
-	kfree(scx200_devices);
-	unregister_chrdev_region(MKDEV(major, 0), num_pins);
+	cdev_del(&scx200_gpio_cdev);
+	/* cdev_put(&scx200_gpio_cdev); */
+
+	unregister_chrdev_region(MKDEV(major, 0), MAX_PINS);
 	platform_device_unregister(pdev);
-	/* kfree(pdev); */
 }
 
 module_init(scx200_gpio_init);
diff --git a/drivers/char/snsc_event.c b/drivers/char/snsc_event.c
index 8b2210b..d12d4f6 100644
--- a/drivers/char/snsc_event.c
+++ b/drivers/char/snsc_event.c
@@ -220,20 +220,7 @@ scdrv_dispatch_event(char *event, int len)
 			       " Sending SIGPWR to init...\n");
 
 		/* give a SIGPWR signal to init proc */
-
-		/* first find init's task */
-		read_lock(&tasklist_lock);
-		for_each_process(p) {
-			if (p->pid == 1)
-				break;
-		}
-		if (p) {
-			force_sig(SIGPWR, p);
-		} else {
-			printk(KERN_ERR "Failed to signal init!\n");
-			snsc_shutting_down = 0; /* so can try again (?) */
-		}
-		read_unlock(&tasklist_lock);
+		kill_proc(1, SIGPWR, 0);
 	} else {
 		/* print to system log */
 		printk("%s|$(0x%x)%s\n", severity, esp_code, desc);
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index cb28592..a1d303f9 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -2584,6 +2584,12 @@ static void __exit specialix_exit_module(void)
 	func_exit();
 }
 
+static struct pci_device_id specialx_pci_tbl[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, specialx_pci_tbl);
+
 module_init(specialix_init_module);
 module_exit(specialix_exit_module);
 
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 6889e7d..a082a2e 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -1141,6 +1141,7 @@ struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vend
 		put_device(dev);
 		clear_bit(chip->dev_num, dev_mask);
 		kfree(chip);
+		kfree(devname);
 		return NULL;
 	}
 
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 3232b19..ee7ac6f 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -424,6 +424,7 @@ static irqreturn_t tis_int_handler(int irq, void *dev_id, struct pt_regs *regs)
 	iowrite32(interrupt,
 		  chip->vendor.iobase +
 		  TPM_INT_STATUS(chip->vendor.locality));
+	ioread32(chip->vendor.iobase + TPM_INT_STATUS(chip->vendor.locality));
 	return IRQ_HANDLED;
 }
 
@@ -431,23 +432,19 @@ static int interrupts = 1;
 module_param(interrupts, bool, 0444);
 MODULE_PARM_DESC(interrupts, "Enable interrupts");
 
-static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
-				      const struct pnp_device_id *pnp_id)
+static int tpm_tis_init(struct device *dev, resource_size_t start,
+			resource_size_t len)
 {
 	u32 vendor, intfcaps, intmask;
 	int rc, i;
-	unsigned long start, len;
 	struct tpm_chip *chip;
 
-	start = pnp_mem_start(pnp_dev, 0);
-	len = pnp_mem_len(pnp_dev, 0);
-
 	if (!start)
 		start = TIS_MEM_BASE;
 	if (!len)
 		len = TIS_MEM_LEN;
 
-	if (!(chip = tpm_register_hardware(&pnp_dev->dev, &tpm_tis)))
+	if (!(chip = tpm_register_hardware(dev, &tpm_tis)))
 		return -ENODEV;
 
 	chip->vendor.iobase = ioremap(start, len);
@@ -464,7 +461,7 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
 	chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
 	chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
 
-	dev_info(&pnp_dev->dev,
+	dev_info(dev,
 		 "1.2 TPM (device-id 0x%X, rev-id %d)\n",
 		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
 
@@ -472,26 +469,26 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
 	intfcaps =
 	    ioread32(chip->vendor.iobase +
 		     TPM_INTF_CAPS(chip->vendor.locality));
-	dev_dbg(&pnp_dev->dev, "TPM interface capabilities (0x%x):\n",
+	dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
 		intfcaps);
 	if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
-		dev_dbg(&pnp_dev->dev, "\tBurst Count Static\n");
+		dev_dbg(dev, "\tBurst Count Static\n");
 	if (intfcaps & TPM_INTF_CMD_READY_INT)
-		dev_dbg(&pnp_dev->dev, "\tCommand Ready Int Support\n");
+		dev_dbg(dev, "\tCommand Ready Int Support\n");
 	if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
-		dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Falling\n");
+		dev_dbg(dev, "\tInterrupt Edge Falling\n");
 	if (intfcaps & TPM_INTF_INT_EDGE_RISING)
-		dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Rising\n");
+		dev_dbg(dev, "\tInterrupt Edge Rising\n");
 	if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
-		dev_dbg(&pnp_dev->dev, "\tInterrupt Level Low\n");
+		dev_dbg(dev, "\tInterrupt Level Low\n");
 	if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
-		dev_dbg(&pnp_dev->dev, "\tInterrupt Level High\n");
+		dev_dbg(dev, "\tInterrupt Level High\n");
 	if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
-		dev_dbg(&pnp_dev->dev, "\tLocality Change Int Support\n");
+		dev_dbg(dev, "\tLocality Change Int Support\n");
 	if (intfcaps & TPM_INTF_STS_VALID_INT)
-		dev_dbg(&pnp_dev->dev, "\tSts Valid Int Support\n");
+		dev_dbg(dev, "\tSts Valid Int Support\n");
 	if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
-		dev_dbg(&pnp_dev->dev, "\tData Avail Int Support\n");
+		dev_dbg(dev, "\tData Avail Int Support\n");
 
 	if (request_locality(chip, 0) != 0) {
 		rc = -ENODEV;
@@ -594,6 +591,16 @@ out_err:
 	return rc;
 }
 
+static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
+				      const struct pnp_device_id *pnp_id)
+{
+	resource_size_t start, len;
+	start = pnp_mem_start(pnp_dev, 0);
+	len = pnp_mem_len(pnp_dev, 0);
+
+	return tpm_tis_init(&pnp_dev->dev, start, len);
+}
+
 static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg)
 {
 	return tpm_pm_suspend(&dev->dev, msg);
@@ -628,8 +635,36 @@ module_param_string(hid, tpm_pnp_tbl[TIS_HID_USR_IDX].id,
 		    sizeof(tpm_pnp_tbl[TIS_HID_USR_IDX].id), 0444);
 MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe");
 
+static struct device_driver tis_drv = {
+	.name = "tpm_tis",
+	.bus = &platform_bus_type,
+	.owner = THIS_MODULE,
+	.suspend = tpm_pm_suspend,
+	.resume = tpm_pm_resume,
+};
+
+static struct platform_device *pdev;
+
+static int force;
+module_param(force, bool, 0444);
+MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
 static int __init init_tis(void)
 {
+	int rc;
+
+	if (force) {
+		rc = driver_register(&tis_drv);
+		if (rc < 0)
+			return rc;
+		if (IS_ERR(pdev=platform_device_register_simple("tpm_tis", -1, NULL, 0)))
+			return PTR_ERR(pdev);
+		if((rc=tpm_tis_init(&pdev->dev, 0, 0)) != 0) {
+			platform_device_unregister(pdev);
+			driver_unregister(&tis_drv);
+		}
+		return rc;
+	}
+
 	return pnp_register_driver(&tis_pnp_driver);
 }
 
@@ -654,7 +689,11 @@ static void __exit cleanup_tis(void)
 		tpm_remove_hardware(chip->dev);
 	}
 	spin_unlock(&tis_lock);
-	pnp_unregister_driver(&tis_pnp_driver);
+	if (force) {
+		platform_device_unregister(pdev);
+		driver_unregister(&tis_drv);
+	} else
+		pnp_unregister_driver(&tis_pnp_driver);
 }
 
 module_init(init_tis);
diff --git a/drivers/char/vr41xx_giu.c b/drivers/char/vr41xx_giu.c
index 1b9b1f1..8116a47 100644
--- a/drivers/char/vr41xx_giu.c
+++ b/drivers/char/vr41xx_giu.c
@@ -33,6 +33,7 @@
 #include <asm/cpu.h>
 #include <asm/io.h>
 #include <asm/vr41xx/giu.h>
+#include <asm/vr41xx/irq.h>
 #include <asm/vr41xx/vr41xx.h>
 
 MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 1ba4039..8d32818 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -423,6 +423,8 @@ static ssize_t store_scaling_governor (struct cpufreq_policy * policy,
 	if (cpufreq_parse_governor(str_governor, &new_policy.policy, &new_policy.governor))
 		return -EINVAL;
 
+	lock_cpu_hotplug();
+
 	/* Do not use cpufreq_set_policy here or the user_policy.max
 	   will be wrongly overridden */
 	mutex_lock(&policy->lock);
@@ -432,6 +434,8 @@ static ssize_t store_scaling_governor (struct cpufreq_policy * policy,
 	policy->user_policy.governor = policy->governor;
 	mutex_unlock(&policy->lock);
 
+	unlock_cpu_hotplug();
+
 	return ret ? ret : count;
 }
 
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 17ee684..b643d71 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -59,6 +59,9 @@
 #define AES_EXTENDED_KEY_SIZE	64	/* in uint32_t units */
 #define AES_EXTENDED_KEY_SIZE_B	(AES_EXTENDED_KEY_SIZE * sizeof(uint32_t))
 
+/* Whenever making any changes to the following
+ * structure *make sure* you keep E, d_data
+ * and cword aligned on 16 Bytes boundaries!!! */
 struct aes_ctx {
 	struct {
 		struct cword encrypt;
@@ -66,8 +69,10 @@ struct aes_ctx {
 	} cword;
 	u32 *D;
 	int key_length;
-	u32 E[AES_EXTENDED_KEY_SIZE];
-	u32 d_data[AES_EXTENDED_KEY_SIZE];
+	u32 E[AES_EXTENDED_KEY_SIZE]
+		__attribute__ ((__aligned__(PADLOCK_ALIGNMENT)));
+	u32 d_data[AES_EXTENDED_KEY_SIZE]
+		__attribute__ ((__aligned__(PADLOCK_ALIGNMENT)));
 };
 
 /* ====== Key management routines ====== */
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 3a7cfe8..4bde30b 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -1,6 +1,6 @@
 /*
  * edac_mc kernel module
- * (C) 2005 Linux Networx (http://lnxi.com)
+ * (C) 2005, 2006 Linux Networx (http://lnxi.com)
  * This file may be distributed under the terms of the
  * GNU General Public License.
  *
@@ -33,13 +33,8 @@
 #include <asm/edac.h>
 #include "edac_mc.h"
 
-#define EDAC_MC_VERSION "Ver: 2.0.0 " __DATE__
+#define EDAC_MC_VERSION "Ver: 2.0.1 " __DATE__
 
-/* For now, disable the EDAC sysfs code.  The sysfs interface that EDAC
- * presents to user space needs more thought, and is likely to change
- * substantially.
- */
-#define DISABLE_EDAC_SYSFS
 
 #ifdef CONFIG_EDAC_DEBUG
 /* Values of 0 to 4 will generate output */
@@ -64,31 +59,12 @@ static int check_pci_parity = 0;	/* default YES check PCI parity */
 static int panic_on_pci_parity;		/* default no panic on PCI Parity */
 static atomic_t pci_parity_count = ATOMIC_INIT(0);
 
-/* Structure of the whitelist and blacklist arrays */
-struct edac_pci_device_list {
-	unsigned int  vendor;		/* Vendor ID */
-	unsigned int  device;		/* Deviice ID */
-};
-
-#define MAX_LISTED_PCI_DEVICES		32
-
-/* List of PCI devices (vendor-id:device-id) that should be skipped */
-static struct edac_pci_device_list pci_blacklist[MAX_LISTED_PCI_DEVICES];
-static int pci_blacklist_count;
-
-/* List of PCI devices (vendor-id:device-id) that should be scanned */
-static struct edac_pci_device_list pci_whitelist[MAX_LISTED_PCI_DEVICES];
-static int pci_whitelist_count ;
-
-#ifndef DISABLE_EDAC_SYSFS
 static struct kobject edac_pci_kobj; /* /sys/devices/system/edac/pci */
 static struct completion edac_pci_kobj_complete;
-#endif	/* DISABLE_EDAC_SYSFS */
 #endif	/* CONFIG_PCI */
 
 /*  START sysfs data and methods */
 
-#ifndef DISABLE_EDAC_SYSFS
 
 static const char *mem_types[] = {
 	[MEM_EMPTY] = "Empty",
@@ -147,18 +123,10 @@ static struct completion edac_memctrl_kobj_complete;
  * /sys/devices/system/edac/mc;
  *	data structures and methods
  */
-#if 0
-static ssize_t memctrl_string_show(void *ptr, char *buffer)
-{
-	char *value = (char*) ptr;
-	return sprintf(buffer, "%s\n", value);
-}
-#endif
-
 static ssize_t memctrl_int_show(void *ptr, char *buffer)
 {
 	int *value = (int*) ptr;
-	return sprintf(buffer, "%d\n", *value);
+	return sprintf(buffer, "%u\n", *value);
 }
 
 static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
@@ -224,11 +192,6 @@ struct memctrl_dev_attribute attr_##_name = {			\
 	.store  = _store,					\
 };
 
-/* cwrow<id> attribute f*/
-#if 0
-MEMCTRL_STRING_ATTR(mc_version,EDAC_MC_VERSION,S_IRUGO,memctrl_string_show,NULL);
-#endif
-
 /* csrow<id> control files */
 MEMCTRL_ATTR(panic_on_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
 MEMCTRL_ATTR(log_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
@@ -257,8 +220,6 @@ static struct kobj_type ktype_memctrl = {
 	.default_attrs = (struct attribute **) memctrl_attr,
 };
 
-#endif  /* DISABLE_EDAC_SYSFS */
-
 /* Initialize the main sysfs entries for edac:
  *   /sys/devices/system/edac
  *
@@ -268,11 +229,6 @@ static struct kobj_type ktype_memctrl = {
  *         !0 FAILURE
  */
 static int edac_sysfs_memctrl_setup(void)
-#ifdef DISABLE_EDAC_SYSFS
-{
-	return 0;
-}
-#else
 {
 	int err=0;
 
@@ -304,7 +260,6 @@ static int edac_sysfs_memctrl_setup(void)
 
 	return err;
 }
-#endif  /* DISABLE_EDAC_SYSFS */
 
 /*
  * MC teardown:
@@ -312,7 +267,6 @@ static int edac_sysfs_memctrl_setup(void)
  */
 static void edac_sysfs_memctrl_teardown(void)
 {
-#ifndef DISABLE_EDAC_SYSFS
 	debugf0("MC: " __FILE__ ": %s()\n", __func__);
 
 	/* Unregister the MC's kobject and wait for reference count to reach
@@ -324,144 +278,9 @@ static void edac_sysfs_memctrl_teardown(void)
 
 	/* Unregister the 'edac' object */
 	sysdev_class_unregister(&edac_class);
-#endif  /* DISABLE_EDAC_SYSFS */
 }
 
 #ifdef CONFIG_PCI
-
-#ifndef DISABLE_EDAC_SYSFS
-
-/*
- * /sys/devices/system/edac/pci;
- * 	data structures and methods
- */
-
-struct list_control {
-	struct edac_pci_device_list *list;
-	int *count;
-};
-
-#if 0
-/* Output the list as:  vendor_id:device:id<,vendor_id:device_id> */
-static ssize_t edac_pci_list_string_show(void *ptr, char *buffer)
-{
-	struct list_control *listctl;
-	struct edac_pci_device_list *list;
-	char *p = buffer;
-	int len=0;
-	int i;
-
-	listctl = ptr;
-	list = listctl->list;
-
-	for (i = 0; i < *(listctl->count); i++, list++ ) {
-		if (len > 0)
-			len += snprintf(p + len, (PAGE_SIZE-len), ",");
-
-		len += snprintf(p + len,
-				(PAGE_SIZE-len),
-				"%x:%x",
-				list->vendor,list->device);
-	}
-
-	len += snprintf(p + len,(PAGE_SIZE-len), "\n");
-	return (ssize_t) len;
-}
-
-/**
- *
- * Scan string from **s to **e looking for one 'vendor:device' tuple
- * where each field is a hex value
- *
- * return 0 if an entry is NOT found
- * return 1 if an entry is found
- *	fill in *vendor_id and *device_id with values found
- *
- * In both cases, make sure *s has been moved forward toward *e
- */
-static int parse_one_device(const char **s,const char **e,
-	unsigned int *vendor_id, unsigned int *device_id)
-{
-	const char *runner, *p;
-
-	/* if null byte, we are done */
-	if (!**s) {
-		(*s)++;  /* keep *s moving */
-		return 0;
-	}
-
-	/* skip over newlines & whitespace */
-	if ((**s == '\n') || isspace(**s)) {
-		(*s)++;
-		return 0;
-	}
-
-	if (!isxdigit(**s)) {
-		(*s)++;
-		return 0;
-	}
-
-	/* parse vendor_id */
-	runner = *s;
-
-	while (runner < *e) {
-		/* scan for vendor:device delimiter */
-		if (*runner == ':') {
-			*vendor_id = simple_strtol((char*) *s, (char**) &p, 16);
-			runner = p + 1;
-			break;
-		}
-
-		runner++;
-	}
-
-	if (!isxdigit(*runner)) {
-		*s = ++runner;
-		return 0;
-	}
-
-	/* parse device_id */
-	if (runner < *e) {
-		*device_id = simple_strtol((char*)runner, (char**)&p, 16);
-		runner = p;
-	}
-
-	*s = runner;
-	return 1;
-}
-
-static ssize_t edac_pci_list_string_store(void *ptr, const char *buffer,
-		size_t count)
-{
-	struct list_control *listctl;
-	struct edac_pci_device_list *list;
-	unsigned int vendor_id, device_id;
-	const char *s, *e;
-	int *index;
-
-	s = (char*)buffer;
-	e = s + count;
-	listctl = ptr;
-	list = listctl->list;
-	index = listctl->count;
-	*index = 0;
-
-	while (*index < MAX_LISTED_PCI_DEVICES) {
-		if (parse_one_device(&s,&e,&vendor_id,&device_id)) {
-			list[ *index ].vendor = vendor_id;
-			list[ *index ].device = device_id;
-			(*index)++;
-		}
-
-		/* check for all data consume */
-		if (s >= e)
-			break;
-	}
-
-	return count;
-}
-
-#endif
 static ssize_t edac_pci_int_show(void *ptr, char *buffer)
 {
 	int *value = ptr;
@@ -529,31 +348,6 @@ struct edac_pci_dev_attribute edac_pci_attr_##_name = {		\
 	.store  = _store,					\
 };
 
-#if 0
-static struct list_control pci_whitelist_control = {
-	.list = pci_whitelist,
-	.count = &pci_whitelist_count
-};
-
-static struct list_control pci_blacklist_control = {
-	.list = pci_blacklist,
-	.count = &pci_blacklist_count
-};
-
-/* whitelist attribute */
-EDAC_PCI_STRING_ATTR(pci_parity_whitelist,
-	&pci_whitelist_control,
-	S_IRUGO|S_IWUSR,
-	edac_pci_list_string_show,
-	edac_pci_list_string_store);
-
-EDAC_PCI_STRING_ATTR(pci_parity_blacklist,
-	&pci_blacklist_control,
-	S_IRUGO|S_IWUSR,
-	edac_pci_list_string_show,
-	edac_pci_list_string_store);
-#endif
-
 /* PCI Parity control files */
 EDAC_PCI_ATTR(check_pci_parity, S_IRUGO|S_IWUSR, edac_pci_int_show,
 	edac_pci_int_store);
@@ -582,18 +376,11 @@ static struct kobj_type ktype_edac_pci = {
 	.default_attrs = (struct attribute **) edac_pci_attr,
 };
 
-#endif  /* DISABLE_EDAC_SYSFS */
-
 /**
  * edac_sysfs_pci_setup()
  *
  */
 static int edac_sysfs_pci_setup(void)
-#ifdef DISABLE_EDAC_SYSFS
-{
-	return 0;
-}
-#else
 {
 	int err;
 
@@ -617,16 +404,13 @@ static int edac_sysfs_pci_setup(void)
 
 	return err;
 }
-#endif  /* DISABLE_EDAC_SYSFS */
 
 static void edac_sysfs_pci_teardown(void)
 {
-#ifndef DISABLE_EDAC_SYSFS
 	debugf0("%s()\n", __func__);
 	init_completion(&edac_pci_kobj_complete);
 	kobject_unregister(&edac_pci_kobj);
 	wait_for_completion(&edac_pci_kobj_complete);
-#endif
 }
 
 
@@ -756,36 +540,6 @@ static void edac_pci_dev_parity_test(struct pci_dev *dev)
 }
 
 /*
- * check_dev_on_list: Scan for a PCI device on a white/black list
- * @list:	an EDAC  &edac_pci_device_list  white/black list pointer
- * @free_index:	index of next free entry on the list
- * @pci_dev:	PCI Device pointer
- *
- * see if list contains the device.
- *
- * Returns:  	0 not found
- *		1 found on list
- */
-static int check_dev_on_list(struct edac_pci_device_list *list,
-		int free_index, struct pci_dev *dev)
-{
-	int i;
-	int rc = 0;     /* Assume not found */
-	unsigned short vendor=dev->vendor;
-	unsigned short device=dev->device;
-
-	/* Scan the list, looking for a vendor/device match */
-	for (i = 0; i < free_index; i++, list++ ) {
-		if ((list->vendor == vendor ) && (list->device == device )) {
-			rc = 1;
-			break;
-		}
-	}
-
-	return rc;
-}
-
-/*
  * pci_dev parity list iterator
  *	Scan the PCI device list for one iteration, looking for SERRORs
  *	Master Parity ERRORS or Parity ERRORs on primary or secondary devices
@@ -799,22 +553,7 @@ static inline void edac_pci_dev_parity_iterator(pci_parity_check_fn_t fn)
 	 * bumped until we are done with it
 	 */
 	while((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		/* if whitelist exists then it has priority, so only scan
-		 * those devices on the whitelist
-		 */
-		if (pci_whitelist_count > 0 ) {
-			if (check_dev_on_list(pci_whitelist,
-					pci_whitelist_count, dev))
-				fn(dev);
-		} else {
-			/*
-			 * if no whitelist, then check if this devices is
-			 * blacklisted
-			 */
-			if (!check_dev_on_list(pci_blacklist,
-					pci_blacklist_count, dev))
-				fn(dev);
-		}
+		fn(dev);
 	}
 }
 
@@ -855,154 +594,101 @@ static inline void clear_pci_parity_errors(void)
 
 #else	/* CONFIG_PCI */
 
-static inline void do_pci_parity_check(void)
-{
-	/* no-op */
-}
-
-static inline void clear_pci_parity_errors(void)
-{
-	/* no-op */
-}
-
-static void edac_sysfs_pci_teardown(void)
-{
-}
+/* pre-process these away */
+#define	do_pci_parity_check()
+#define	clear_pci_parity_errors()
+#define	edac_sysfs_pci_teardown()
+#define	edac_sysfs_pci_setup()	(0)
 
-static int edac_sysfs_pci_setup(void)
-{
-	return 0;
-}
 #endif	/* CONFIG_PCI */
 
-#ifndef DISABLE_EDAC_SYSFS
-
-/* EDAC sysfs CSROW data structures and methods */
-
-/* Set of more detailed csrow<id> attribute show/store functions */
-static ssize_t csrow_ch0_dimm_label_show(struct csrow_info *csrow, char *data)
-{
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 0) {
-		size = snprintf(data, EDAC_MC_LABEL_LEN,"%s\n",
-			csrow->channels[0].label);
-	}
-
-	return size;
-}
+/* EDAC sysfs CSROW data structures and methods
+ */
 
-static ssize_t csrow_ch1_dimm_label_show(struct csrow_info *csrow, char *data)
+/* Set of more default csrow<id> attribute show/store functions */
+static ssize_t csrow_ue_count_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 0) {
-		size = snprintf(data, EDAC_MC_LABEL_LEN, "%s\n",
-			csrow->channels[1].label);
-	}
-
-	return size;
+	return sprintf(data,"%u\n", csrow->ue_count);
 }
 
-static ssize_t csrow_ch0_dimm_label_store(struct csrow_info *csrow,
-		const char *data, size_t size)
+static ssize_t csrow_ce_count_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t max_size = 0;
-
-	if (csrow->nr_channels > 0) {
-		max_size = min((ssize_t)size,(ssize_t)EDAC_MC_LABEL_LEN-1);
-		strncpy(csrow->channels[0].label, data, max_size);
-		csrow->channels[0].label[max_size] = '\0';
-	}
-
-	return size;
+	return sprintf(data,"%u\n", csrow->ce_count);
 }
 
-static ssize_t csrow_ch1_dimm_label_store(struct csrow_info *csrow,
-		const char *data, size_t size)
+static ssize_t csrow_size_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t max_size = 0;
-
-	if (csrow->nr_channels > 1) {
-		max_size = min((ssize_t)size,(ssize_t)EDAC_MC_LABEL_LEN-1);
-		strncpy(csrow->channels[1].label, data, max_size);
-		csrow->channels[1].label[max_size] = '\0';
-	}
-
-	return max_size;
+	return sprintf(data,"%u\n", PAGES_TO_MiB(csrow->nr_pages));
 }
 
-static ssize_t csrow_ue_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_mem_type_show(struct csrow_info *csrow, char *data, int private)
 {
-	return sprintf(data,"%u\n", csrow->ue_count);
+	return sprintf(data,"%s\n", mem_types[csrow->mtype]);
 }
 
-static ssize_t csrow_ce_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_dev_type_show(struct csrow_info *csrow, char *data, int private)
 {
-	return sprintf(data,"%u\n", csrow->ce_count);
+	return sprintf(data,"%s\n", dev_types[csrow->dtype]);
 }
 
-static ssize_t csrow_ch0_ce_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 0) {
-		size = sprintf(data,"%u\n", csrow->channels[0].ce_count);
-	}
-
-	return size;
+	return sprintf(data,"%s\n", edac_caps[csrow->edac_mode]);
 }
 
-static ssize_t csrow_ch1_ce_count_show(struct csrow_info *csrow, char *data)
+/* show/store functions for DIMM Label attributes */
+static ssize_t channel_dimm_label_show(struct csrow_info *csrow,
+		char *data, int channel)
 {
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 1) {
-		size = sprintf(data,"%u\n", csrow->channels[1].ce_count);
-	}
-
-	return size;
+	return snprintf(data, EDAC_MC_LABEL_LEN,"%s",
+			csrow->channels[channel].label);
 }
 
-static ssize_t csrow_size_show(struct csrow_info *csrow, char *data)
+static ssize_t channel_dimm_label_store(struct csrow_info *csrow,
+				const char *data,
+				size_t count,
+				int channel)
 {
-	return sprintf(data,"%u\n", PAGES_TO_MiB(csrow->nr_pages));
-}
+	ssize_t max_size = 0;
 
-static ssize_t csrow_mem_type_show(struct csrow_info *csrow, char *data)
-{
-	return sprintf(data,"%s\n", mem_types[csrow->mtype]);
-}
+	max_size = min((ssize_t)count,(ssize_t)EDAC_MC_LABEL_LEN-1);
+	strncpy(csrow->channels[channel].label, data, max_size);
+	csrow->channels[channel].label[max_size] = '\0';
 
-static ssize_t csrow_dev_type_show(struct csrow_info *csrow, char *data)
-{
-	return sprintf(data,"%s\n", dev_types[csrow->dtype]);
+	return max_size;
 }
 
-static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data)
+/* show function for dynamic chX_ce_count attribute */
+static ssize_t channel_ce_count_show(struct csrow_info *csrow,
+				char *data,
+				int channel)
 {
-	return sprintf(data,"%s\n", edac_caps[csrow->edac_mode]);
+	return sprintf(data, "%u\n", csrow->channels[channel].ce_count);
 }
 
+/* csrow specific attribute structure */
 struct csrowdev_attribute {
 	struct attribute attr;
-	ssize_t (*show)(struct csrow_info *,char *);
-	ssize_t (*store)(struct csrow_info *, const char *,size_t);
+	ssize_t (*show)(struct csrow_info *,char *,int);
+	ssize_t (*store)(struct csrow_info *, const char *,size_t,int);
+	int    private;
 };
 
 #define to_csrow(k) container_of(k, struct csrow_info, kobj)
 #define to_csrowdev_attr(a) container_of(a, struct csrowdev_attribute, attr)
 
-/* Set of show/store higher level functions for csrow objects */
-static ssize_t csrowdev_show(struct kobject *kobj, struct attribute *attr,
-		char *buffer)
+/* Set of show/store higher level functions for default csrow attributes */
+static ssize_t csrowdev_show(struct kobject *kobj,
+			struct attribute *attr,
+			char *buffer)
 {
 	struct csrow_info *csrow = to_csrow(kobj);
 	struct csrowdev_attribute *csrowdev_attr = to_csrowdev_attr(attr);
 
 	if (csrowdev_attr->show)
-		return csrowdev_attr->show(csrow, buffer);
-
+		return csrowdev_attr->show(csrow,
+					buffer,
+					csrowdev_attr->private);
 	return -EIO;
 }
 
@@ -1013,8 +699,10 @@ static ssize_t csrowdev_store(struct kobject *kobj, struct attribute *attr,
 	struct csrowdev_attribute * csrowdev_attr = to_csrowdev_attr(attr);
 
 	if (csrowdev_attr->store)
-		return csrowdev_attr->store(csrow, buffer, count);
-
+		return csrowdev_attr->store(csrow,
+					buffer,
+					count,
+					csrowdev_attr->private);
 	return -EIO;
 }
 
@@ -1023,69 +711,157 @@ static struct sysfs_ops csrowfs_ops = {
 	.store  = csrowdev_store
 };
 
-#define CSROWDEV_ATTR(_name,_mode,_show,_store)			\
+#define CSROWDEV_ATTR(_name,_mode,_show,_store,_private)	\
 struct csrowdev_attribute attr_##_name = {			\
 	.attr = {.name = __stringify(_name), .mode = _mode },	\
 	.show   = _show,					\
 	.store  = _store,					\
+	.private = _private,					\
 };
 
-/* cwrow<id>/attribute files */
-CSROWDEV_ATTR(size_mb,S_IRUGO,csrow_size_show,NULL);
-CSROWDEV_ATTR(dev_type,S_IRUGO,csrow_dev_type_show,NULL);
-CSROWDEV_ATTR(mem_type,S_IRUGO,csrow_mem_type_show,NULL);
-CSROWDEV_ATTR(edac_mode,S_IRUGO,csrow_edac_mode_show,NULL);
-CSROWDEV_ATTR(ue_count,S_IRUGO,csrow_ue_count_show,NULL);
-CSROWDEV_ATTR(ce_count,S_IRUGO,csrow_ce_count_show,NULL);
-CSROWDEV_ATTR(ch0_ce_count,S_IRUGO,csrow_ch0_ce_count_show,NULL);
-CSROWDEV_ATTR(ch1_ce_count,S_IRUGO,csrow_ch1_ce_count_show,NULL);
-
-/* control/attribute files */
-CSROWDEV_ATTR(ch0_dimm_label,S_IRUGO|S_IWUSR,
-		csrow_ch0_dimm_label_show,
-		csrow_ch0_dimm_label_store);
-CSROWDEV_ATTR(ch1_dimm_label,S_IRUGO|S_IWUSR,
-		csrow_ch1_dimm_label_show,
-		csrow_ch1_dimm_label_store);
+/* default cwrow<id>/attribute files */
+CSROWDEV_ATTR(size_mb,S_IRUGO,csrow_size_show,NULL,0);
+CSROWDEV_ATTR(dev_type,S_IRUGO,csrow_dev_type_show,NULL,0);
+CSROWDEV_ATTR(mem_type,S_IRUGO,csrow_mem_type_show,NULL,0);
+CSROWDEV_ATTR(edac_mode,S_IRUGO,csrow_edac_mode_show,NULL,0);
+CSROWDEV_ATTR(ue_count,S_IRUGO,csrow_ue_count_show,NULL,0);
+CSROWDEV_ATTR(ce_count,S_IRUGO,csrow_ce_count_show,NULL,0);
 
-/* Attributes of the CSROW<id> object */
-static struct csrowdev_attribute *csrow_attr[] = {
+/* default attributes of the CSROW<id> object */
+static struct csrowdev_attribute *default_csrow_attr[] = {
 	&attr_dev_type,
 	&attr_mem_type,
 	&attr_edac_mode,
 	&attr_size_mb,
 	&attr_ue_count,
 	&attr_ce_count,
-	&attr_ch0_ce_count,
-	&attr_ch1_ce_count,
-	&attr_ch0_dimm_label,
-	&attr_ch1_dimm_label,
 	NULL,
 };
 
-/* No memory to release */
+
+/* possible dynamic channel DIMM Label attribute files */
+CSROWDEV_ATTR(ch0_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		0 );
+CSROWDEV_ATTR(ch1_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		1 );
+CSROWDEV_ATTR(ch2_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		2 );
+CSROWDEV_ATTR(ch3_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		3 );
+CSROWDEV_ATTR(ch4_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		4 );
+CSROWDEV_ATTR(ch5_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		5 );
+
+/* Total possible dynamic DIMM Label attribute file table */
+static struct csrowdev_attribute *dynamic_csrow_dimm_attr[] = {
+		&attr_ch0_dimm_label,
+		&attr_ch1_dimm_label,
+		&attr_ch2_dimm_label,
+		&attr_ch3_dimm_label,
+		&attr_ch4_dimm_label,
+		&attr_ch5_dimm_label
+};
+
+/* possible dynamic channel ce_count attribute files */
+CSROWDEV_ATTR(ch0_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		0 );
+CSROWDEV_ATTR(ch1_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		1 );
+CSROWDEV_ATTR(ch2_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		2 );
+CSROWDEV_ATTR(ch3_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		3 );
+CSROWDEV_ATTR(ch4_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		4 );
+CSROWDEV_ATTR(ch5_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		5 );
+
+/* Total possible dynamic ce_count attribute file table */
+static struct csrowdev_attribute *dynamic_csrow_ce_count_attr[] = {
+		&attr_ch0_ce_count,
+		&attr_ch1_ce_count,
+		&attr_ch2_ce_count,
+		&attr_ch3_ce_count,
+		&attr_ch4_ce_count,
+		&attr_ch5_ce_count
+};
+
+
+#define EDAC_NR_CHANNELS	6
+
+/* Create dynamic CHANNEL files, indexed by 'chan',  under specifed CSROW */
+static int edac_create_channel_files(struct kobject *kobj, int chan)
+{
+	int err=-ENODEV;
+
+	if (chan >= EDAC_NR_CHANNELS)
+		return err;
+
+	/* create the DIMM label attribute file */
+	err = sysfs_create_file(kobj,
+			(struct attribute *) dynamic_csrow_dimm_attr[chan]);
+
+	if (!err) {
+		/* create the CE Count attribute file */
+		err = sysfs_create_file(kobj,
+			(struct attribute *) dynamic_csrow_ce_count_attr[chan]);
+	} else {
+		debugf1("%s()  dimm labels and ce_count files created", __func__);
+	}
+
+	return err;
+}
+
+/* No memory to release for this kobj */
 static void edac_csrow_instance_release(struct kobject *kobj)
 {
 	struct csrow_info *cs;
 
-	debugf1("%s()\n", __func__);
 	cs = container_of(kobj, struct csrow_info, kobj);
 	complete(&cs->kobj_complete);
 }
 
+/* the kobj_type instance for a CSROW */
 static struct kobj_type ktype_csrow = {
 	.release = edac_csrow_instance_release,
 	.sysfs_ops = &csrowfs_ops,
-	.default_attrs = (struct attribute **) csrow_attr,
+	.default_attrs = (struct attribute **) default_csrow_attr,
 };
 
 /* Create a CSROW object under specifed edac_mc_device */
-static int edac_create_csrow_object(struct kobject *edac_mci_kobj,
-		struct csrow_info *csrow, int index)
+static int edac_create_csrow_object(
+		struct kobject *edac_mci_kobj,
+		struct csrow_info *csrow,
+		int index)
 {
 	int err = 0;
+	int chan;
 
-	debugf0("%s()\n", __func__);
 	memset(&csrow->kobj, 0, sizeof(csrow->kobj));
 
 	/* generate ..../edac/mc/mc<id>/csrow<index>   */
@@ -1095,21 +871,27 @@ static int edac_create_csrow_object(struct kobject *edac_mci_kobj,
 
 	/* name this instance of csrow<id> */
 	err = kobject_set_name(&csrow->kobj,"csrow%d",index);
+	if (err)
+		goto error_exit;
 
+	/* Instanstiate the csrow object */
+	err = kobject_register(&csrow->kobj);
 	if (!err) {
-		/* Instanstiate the csrow object */
-		err = kobject_register(&csrow->kobj);
-
-		if (err)
-			debugf0("Failed to register CSROW%d\n",index);
-		else
-			debugf0("Registered CSROW%d\n",index);
+		/* Create the dyanmic attribute files on this csrow,
+		 * namely, the DIMM labels and the channel ce_count
+		 */
+		for (chan = 0; chan < csrow->nr_channels; chan++) {
+			err = edac_create_channel_files(&csrow->kobj,chan);
+			if (err)
+				break;
+		}
 	}
 
+error_exit:
 	return err;
 }
 
-/* sysfs data structures and methods for the MCI kobjects */
+/* default sysfs methods and data structures for the main MCI kobject */
 
 static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci,
 		const char *data, size_t count)
@@ -1135,6 +917,7 @@ static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci,
 	return count;
 }
 
+/* default attribute files for the MCI object */
 static ssize_t mci_ue_count_show(struct mem_ctl_info *mci, char *data)
 {
 	return sprintf(data,"%d\n", mci->ue_count);
@@ -1160,71 +943,11 @@ static ssize_t mci_seconds_show(struct mem_ctl_info *mci, char *data)
 	return sprintf(data,"%ld\n", (jiffies - mci->start_time) / HZ);
 }
 
-static ssize_t mci_mod_name_show(struct mem_ctl_info *mci, char *data)
-{
-	return sprintf(data,"%s %s\n", mci->mod_name, mci->mod_ver);
-}
-
 static ssize_t mci_ctl_name_show(struct mem_ctl_info *mci, char *data)
 {
 	return sprintf(data,"%s\n", mci->ctl_name);
 }
 
-static int mci_output_edac_cap(char *buf, unsigned long edac_cap)
-{
-	char *p = buf;
-	int bit_idx;
-
-	for (bit_idx = 0; bit_idx < 8 * sizeof(edac_cap); bit_idx++) {
-		if ((edac_cap >> bit_idx) & 0x1)
-			p += sprintf(p, "%s ", edac_caps[bit_idx]);
-	}
-
-	return p - buf;
-}
-
-static ssize_t mci_edac_capability_show(struct mem_ctl_info *mci, char *data)
-{
-	char *p = data;
-
-	p += mci_output_edac_cap(p,mci->edac_ctl_cap);
-	p += sprintf(p, "\n");
-	return p - data;
-}
-
-static ssize_t mci_edac_current_capability_show(struct mem_ctl_info *mci,
-		char *data)
-{
-	char *p = data;
-
-	p += mci_output_edac_cap(p,mci->edac_cap);
-	p += sprintf(p, "\n");
-	return p - data;
-}
-
-static int mci_output_mtype_cap(char *buf, unsigned long mtype_cap)
-{
-	char *p = buf;
-	int bit_idx;
-
-	for (bit_idx = 0; bit_idx < 8 * sizeof(mtype_cap); bit_idx++) {
-		if ((mtype_cap >> bit_idx) & 0x1)
-			p += sprintf(p, "%s ", mem_types[bit_idx]);
-	}
-
-	return p - buf;
-}
-
-static ssize_t mci_supported_mem_type_show(struct mem_ctl_info *mci,
-		char *data)
-{
-	char *p = data;
-
-	p += mci_output_mtype_cap(p,mci->mtype_cap);
-	p += sprintf(p, "\n");
-	return p - data;
-}
-
 static ssize_t mci_size_mb_show(struct mem_ctl_info *mci, char *data)
 {
 	int total_pages, csrow_idx;
@@ -1251,6 +974,7 @@ struct mcidev_attribute {
 #define to_mci(k) container_of(k, struct mem_ctl_info, edac_mci_kobj)
 #define to_mcidev_attr(a) container_of(a, struct mcidev_attribute, attr)
 
+/* MCI show/store functions for top most object */
 static ssize_t mcidev_show(struct kobject *kobj, struct attribute *attr,
 		char *buffer)
 {
@@ -1287,31 +1011,21 @@ struct mcidev_attribute mci_attr_##_name = {			\
 	.store  = _store,					\
 };
 
-/* Control file */
+/* default Control file */
 MCIDEV_ATTR(reset_counters,S_IWUSR,NULL,mci_reset_counters_store);
 
-/* Attribute files */
+/* default Attribute files */
 MCIDEV_ATTR(mc_name,S_IRUGO,mci_ctl_name_show,NULL);
-MCIDEV_ATTR(module_name,S_IRUGO,mci_mod_name_show,NULL);
-MCIDEV_ATTR(edac_capability,S_IRUGO,mci_edac_capability_show,NULL);
 MCIDEV_ATTR(size_mb,S_IRUGO,mci_size_mb_show,NULL);
 MCIDEV_ATTR(seconds_since_reset,S_IRUGO,mci_seconds_show,NULL);
 MCIDEV_ATTR(ue_noinfo_count,S_IRUGO,mci_ue_noinfo_show,NULL);
 MCIDEV_ATTR(ce_noinfo_count,S_IRUGO,mci_ce_noinfo_show,NULL);
 MCIDEV_ATTR(ue_count,S_IRUGO,mci_ue_count_show,NULL);
 MCIDEV_ATTR(ce_count,S_IRUGO,mci_ce_count_show,NULL);
-MCIDEV_ATTR(edac_current_capability,S_IRUGO,
-	mci_edac_current_capability_show,NULL);
-MCIDEV_ATTR(supported_mem_type,S_IRUGO,
-	mci_supported_mem_type_show,NULL);
 
 static struct mcidev_attribute *mci_attr[] = {
 	&mci_attr_reset_counters,
-	&mci_attr_module_name,
 	&mci_attr_mc_name,
-	&mci_attr_edac_capability,
-	&mci_attr_edac_current_capability,
-	&mci_attr_supported_mem_type,
 	&mci_attr_size_mb,
 	&mci_attr_seconds_since_reset,
 	&mci_attr_ue_noinfo_count,
@@ -1339,7 +1053,6 @@ static struct kobj_type ktype_mci = {
 	.default_attrs = (struct attribute **) mci_attr,
 };
 
-#endif  /* DISABLE_EDAC_SYSFS */
 
 #define EDAC_DEVICE_SYMLINK	"device"
 
@@ -1352,11 +1065,6 @@ static struct kobj_type ktype_mci = {
  *	!0	Failure
  */
 static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
-#ifdef DISABLE_EDAC_SYSFS
-{
-	return 0;
-}
-#else
 {
 	int i;
 	int err;
@@ -1368,7 +1076,6 @@ static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
 
 	/* set the name of the mc<id> object */
 	err = kobject_set_name(edac_mci_kobj,"mc%d",mci->mc_idx);
-
 	if (err)
 		return err;
 
@@ -1378,14 +1085,12 @@ static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
 
 	/* register the mc<id> kobject */
 	err = kobject_register(edac_mci_kobj);
-
 	if (err)
 		return err;
 
 	/* create a symlink for the device */
 	err = sysfs_create_link(edac_mci_kobj, &mci->dev->kobj,
 				EDAC_DEVICE_SYMLINK);
-
 	if (err)
 		goto fail0;
 
@@ -1398,7 +1103,6 @@ static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
 		/* Only expose populated CSROWs */
 		if (csrow->nr_pages > 0) {
 			err = edac_create_csrow_object(edac_mci_kobj,csrow,i);
-
 			if (err)
 				goto fail1;
 		}
@@ -1422,14 +1126,12 @@ fail0:
 	wait_for_completion(&mci->kobj_complete);
 	return err;
 }
-#endif  /* DISABLE_EDAC_SYSFS */
 
 /*
  * remove a Memory Controller instance
  */
 static void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
 {
-#ifndef DISABLE_EDAC_SYSFS
 	int i;
 
 	debugf0("%s()\n", __func__);
@@ -1447,7 +1149,6 @@ static void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
 	init_completion(&mci->kobj_complete);
 	kobject_unregister(&mci->edac_mci_kobj);
 	wait_for_completion(&mci->kobj_complete);
-#endif  /* DISABLE_EDAC_SYSFS */
 }
 
 /* END OF sysfs data and methods */
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 59122cc..cc15c4f 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -142,6 +142,14 @@ static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 };
 static int force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Set to one to force detection.");
+static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1,
+	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 };
+module_param_array(bank1_types, int, NULL, 0);
+MODULE_PARM_DESC(bank1_types, "Bank1 sensortype autodetection override:\n"
+	"   -1 autodetect\n"
+	"    0 volt sensor\n"
+	"    1 temp sensor\n"
+	"    2 not connected");
 static int fan_sensors;
 module_param(fan_sensors, int, 0);
 MODULE_PARM_DESC(fan_sensors, "Number of fan sensors on the uGuru "
@@ -397,6 +405,15 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
 	u8 val, buf[3];
 	int ret = ABIT_UGURU_NC;
 
+	/* If overriden by the user return the user selected type */
+	if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR &&
+			bank1_types[sensor_addr] <= ABIT_UGURU_NC) {
+		ABIT_UGURU_DEBUG(2, "assuming sensor type %d for bank1 sensor "
+			"%d because of \"bank1_types\" module param\n",
+			bank1_types[sensor_addr], (int)sensor_addr);
+		return bank1_types[sensor_addr];
+	}
+
 	/* First read the sensor and the current settings */
 	if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, sensor_addr, &val,
 			1, ABIT_UGURU_MAX_RETRIES) != 1)
@@ -514,7 +531,7 @@ abituguru_detect_no_bank2_sensors(struct abituguru_data *data)
 {
 	int i;
 
-	if (fan_sensors) {
+	if (fan_sensors > 0 && fan_sensors <= ABIT_UGURU_MAX_BANK2_SENSORS) {
 		data->bank2_sensors = fan_sensors;
 		ABIT_UGURU_DEBUG(2, "assuming %d fan sensors because of "
 			"\"fan_sensors\" module param\n",
@@ -568,7 +585,7 @@ abituguru_detect_no_pwms(struct abituguru_data *data)
 {
 	int i, j;
 
-	if (pwms) {
+	if (pwms > 0 && pwms <= ABIT_UGURU_MAX_PWMS) {
 		data->pwms = pwms;
 		ABIT_UGURU_DEBUG(2, "assuming %d PWM outputs because of "
 			"\"pwms\" module param\n", (int)data->pwms);
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index df05df1..ab230c0 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -372,7 +372,6 @@ static inline int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
 
 	while (count > 0) {
 		inval = i2c_inb(i2c_adap);
-/*printk("%#02x ",inval); if ( ! (count % 16) ) printk("\n"); */
 		if (inval>=0) {
 			*temp = inval;
 			rdcount++;
@@ -544,8 +543,7 @@ int i2c_bit_add_bus(struct i2c_adapter *adap)
 	adap->timeout = 100;	/* default values, should	*/
 	adap->retries = 3;	/* be replaced by defines	*/
 
-	i2c_add_adapter(adap);
-	return 0;
+	return i2c_add_adapter(adap);
 }
 
 
diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c
index 2db7bfc..70d8eef 100644
--- a/drivers/i2c/algos/i2c-algo-ite.c
+++ b/drivers/i2c/algos/i2c-algo-ite.c
@@ -742,10 +742,8 @@ int i2c_iic_add_bus(struct i2c_adapter *adap)
 	adap->retries = 3;		/* be replaced by defines	*/
 	adap->flags = 0;
 
-	i2c_add_adapter(adap);
 	iic_init(iic_adap);
-
-	return 0;
+	return i2c_add_adapter(adap);
 }
 
 
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 82946ac..b88a6fc 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -374,10 +374,10 @@ int i2c_pca_add_bus(struct i2c_adapter *adap)
 	adap->timeout = 100;		/* default values, should	*/
 	adap->retries = 3;		/* be replaced by defines	*/
 
-	rval = pca_init(pca_adap);
+	if ((rval = pca_init(pca_adap)))
+		return rval;
 
-	if (!rval)
-		i2c_add_adapter(adap);
+	rval = i2c_add_adapter(adap);
 
 	return rval;
 }
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 6e498df..5b24930 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -479,9 +479,11 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap)
 	adap->timeout = 100;		/* default values, should	*/
 	adap->retries = 3;		/* be replaced by defines	*/
 
-	rval = pcf_init_8584(pcf_adap);
-	if (!rval)
-		i2c_add_adapter(adap);
+	if ((rval = pcf_init_8584(pcf_adap)))
+		return rval;
+
+	rval = i2c_add_adapter(adap);
+
 	return rval;
 }
 
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
index 3df3f09..32d41c6 100644
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -173,9 +173,7 @@ int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
 		printk("\n");
 	}
 
-	i2c_add_adapter(i2c_adap);
-
-	return 0;
+	return i2c_add_adapter(i2c_adap);
 }
 
 
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index aca7e16..48c5693 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -21,6 +21,9 @@
  * - Make it work with IXP46x chips
  * - Cleanup function names, coding style, etc
  *
+ * - writing to slave address causes latchup on iop331.
+ *	fix: driver refuses to address self.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, version 2.
@@ -73,12 +76,6 @@ iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
 } 
 
 static void 
-iop3xx_i2c_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap)
-{
-	__raw_writel(MYSAR, iop3xx_adap->ioaddr + SAR_OFFSET);
-}
-
-static void 
 iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
 {
 	u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
@@ -248,6 +245,13 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
 	int status;
 	int rc;
 
+	/* avoid writing to my slave address (hangs on 80331),
+	 * forbidden in Intel developer manual
+	 */
+	if (msg->addr == MYSAR) {
+		return -EBUSY;
+	}
+
 	__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
 	
 	cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
@@ -498,7 +502,6 @@ iop3xx_i2c_probe(struct platform_device *pdev)
 	spin_lock_init(&adapter_data->lock);
 
 	iop3xx_i2c_reset(adapter_data);
-	iop3xx_i2c_set_slave_addr(adapter_data);
 	iop3xx_i2c_enable(adapter_data);
 
 	platform_set_drvdata(pdev, new_adapter);
diff --git a/drivers/i2c/busses/i2c-iop3xx.h b/drivers/i2c/busses/i2c-iop3xx.h
index e46ebae..8485861 100644
--- a/drivers/i2c/busses/i2c-iop3xx.h
+++ b/drivers/i2c/busses/i2c-iop3xx.h
@@ -80,7 +80,7 @@
 #define IOP3XX_GPOD_I2C0	0x00c0	/* clear these bits to enable ch0 */
 #define IOP3XX_GPOD_I2C1	0x0030	/* clear these bits to enable ch1 */
 
-#define MYSAR			0x02	/* SWAG a suitable slave address */
+#define MYSAR			0	/* default slave address */
 
 #define I2C_ERR			321
 #define I2C_ERR_BERR		(I2C_ERR+0)
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 2a0b3be..53bb435 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -148,8 +148,6 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 	int			read;
 	int			addrdir;
 
-	if (num != 1)
-		return -EINVAL;
 	if (msgs->flags & I2C_M_TEN)
 		return -EINVAL;
 	read = (msgs->flags & I2C_M_RD) != 0;
@@ -166,7 +164,7 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
  bail:
 	pmac_i2c_close(bus);
-	return rc < 0 ? rc : msgs->len;
+	return rc < 0 ? rc : 1;
 }
 
 static u32 i2c_powermac_func(struct i2c_adapter * adapter)
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 22a3eda..ced309f 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -184,21 +184,21 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
 		break;
 
 	case state_read:
-		/* Set ACK if receiving the last byte */
-		if (iface->len == 1)
+		/* Set ACK if _next_ byte will be the last one */
+		if (iface->len == 2)
 			outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
 		else
 			outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
 
-		*iface->ptr++ = inb(ACBSDA);
-		--iface->len;
-
-		if (iface->len == 0) {
+		if (iface->len == 1) {
 			iface->result = 0;
 			iface->state = state_idle;
 			outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
 		}
 
+		*iface->ptr++ = inb(ACBSDA);
+		--iface->len;
+
 		break;
 
 	case state_write:
@@ -307,8 +307,12 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
 		buffer = (u8 *)&cur_word;
 		break;
 
-	case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (rw == I2C_SMBUS_READ)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */
 		len = data->block[0];
+		if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+			return -EINVAL;
 		buffer = &data->block[1];
 		break;
 
@@ -372,7 +376,7 @@ static u32 scx200_acb_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-	       I2C_FUNC_SMBUS_BLOCK_DATA;
+	       I2C_FUNC_SMBUS_I2C_BLOCK;
 }
 
 /* For now, we only handle combined mode (smbus) */
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 54b6e6a..cb22280 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -134,11 +134,13 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
 	new_client->driver = &pca9539_driver;
 	new_client->flags = 0;
 
-	/* Detection: the pca9539 only has 8 registers (0-7).
-	   A read of 7 should succeed, but a read of 8 should fail. */
-	if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
-	    (i2c_smbus_read_byte_data(new_client, 8) >= 0))
-		goto exit_kfree;
+	if (kind < 0) {
+		/* Detection: the pca9539 only has 8 registers (0-7).
+		   A read of 7 should succeed, but a read of 8 should fail. */
+		if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
+		    (i2c_smbus_read_byte_data(new_client, 8) >= 0))
+			goto exit_kfree;
+	}
 
 	strlcpy(new_client->name, "pca9539", I2C_NAME_SIZE);
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index a45155f..9cb277d 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -756,9 +756,9 @@ int i2c_probe(struct i2c_adapter *adapter,
 					"parameter for adapter %d, "
 					"addr 0x%02x\n", adap_id,
 					address_data->ignore[j + 1]);
+				ignore = 1;
+				break;
 			}
-			ignore = 1;
-			break;
 		}
 		if (ignore)
 			continue;
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index b7e459e..602797a 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -146,16 +146,7 @@ static void ide_detach(struct pcmcia_device *link)
     kfree(link->priv);
 } /* ide_detach */
 
-static void idecs_mmio_fixup(ide_hwif_t *hwif)
-{
-	default_hwif_mmiops(hwif);
-	hwif->mmio = 2;
-
-	ide_undecoded_slave(hwif);
-}
-
-static int idecs_register(unsigned long io, unsigned long ctl,
-	unsigned long irq, struct pcmcia_device *handle, int is_mmio)
+static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
 {
     hw_regs_t hw;
     memset(&hw, 0, sizeof(hw));
@@ -163,19 +154,7 @@ static int idecs_register(unsigned long io, unsigned long ctl,
     hw.irq = irq;
     hw.chipset = ide_pci;
     hw.dev = &handle->dev;
-
-    if(is_mmio)
-    	return ide_register_hw_with_fixup(&hw, NULL, idecs_mmio_fixup);
-    else
-        return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
-}
-
-void outb_io(unsigned char value, unsigned long port) {
-	outb(value, port);
-}
-
-void outb_mem(unsigned char value, unsigned long port) {
-	writeb(value, (void __iomem *) port);
+    return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
 }
 
 /*======================================================================
@@ -201,8 +180,7 @@ static int ide_config(struct pcmcia_device *link)
     } *stk = NULL;
     cistpl_cftable_entry_t *cfg;
     int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0;
-    unsigned long io_base, ctl_base, is_mmio, try_slave;
-    void (*my_outb)(unsigned char, unsigned long);
+    unsigned long io_base, ctl_base;
 
     DEBUG(0, "ide_config(0x%p)\n", link);
 
@@ -232,7 +210,7 @@ static int ide_config(struct pcmcia_device *link)
     /* Not sure if this is right... look up the current Vcc */
     CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));
 
-    pass = io_base = ctl_base = is_mmio = try_slave = 0;
+    pass = io_base = ctl_base = 0;
     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
     tuple.Attributes = 0;
     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
@@ -280,45 +258,11 @@ static int ide_config(struct pcmcia_device *link)
 			goto next_entry;
 		io_base = link->io.BasePort1;
 		ctl_base = link->io.BasePort1 + 0x0e;
-
-		if (io->win[0].len >= 0x20)
-			try_slave = 1;
-
 	    } else goto next_entry;
 	    /* If we've got this far, we're done */
 	    break;
 	}
 
-	if ((cfg->mem.nwin > 0) || (stk->dflt.mem.nwin > 0)) {
-	    win_req_t req;
-	    memreq_t map;
-	    cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &stk->dflt.mem;
-
-	    if (mem->win[0].len < 16)
-	    	goto next_entry;
-
-	    req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-	    req.Attributes |= WIN_ENABLE;
-	    req.Base = mem->win[0].host_addr;
-	    req.Size = 0;
-
-	    req.AccessSpeed = 0;
-	    if (pcmcia_request_window(&link, &req, &link->win) != 0)
-		goto next_entry;
-	    map.Page = 0; map.CardOffset = mem->win[0].card_addr;
-	    if (pcmcia_map_mem_page(link->win, &map) != 0)
-		goto next_entry;
-
-      	    io_base = (unsigned long) ioremap(req.Base, req.Size);
-    	    ctl_base = io_base + 0x0e;
-    	    is_mmio = 1;
-
-    	    if (mem->win[0].len >= 0x20)
-    	    	try_slave = 1;
-
-	    break;
-	}
-
     next_entry:
 	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
 	    memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
@@ -334,26 +278,21 @@ static int ide_config(struct pcmcia_device *link)
     CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
     CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
 
-    if(is_mmio)
-    	my_outb = outb_mem;
-    else
-    	my_outb = outb_io;
-
     /* disable drive interrupts during IDE probe */
-    my_outb(0x02, ctl_base);
+    outb(0x02, ctl_base);
 
     /* special setup for KXLC005 card */
     if (is_kme)
-	my_outb(0x81, ctl_base+1);
+	outb(0x81, ctl_base+1);
 
     /* retry registration in case device is still spinning up */
     for (hd = -1, i = 0; i < 10; i++) {
-	hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link, is_mmio);
+	hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
 	if (hd >= 0) break;
-	if (try_slave) {
-	    my_outb(0x02, ctl_base + 0x10);
+	if (link->io.NumPorts1 == 0x20) {
+	    outb(0x02, ctl_base + 0x10);
 	    hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
-				link->irq.AssignedIRQ, link, is_mmio);
+				link->irq.AssignedIRQ, link);
 	    if (hd >= 0) {
 		io_base += 0x10;
 		ctl_base += 0x10;
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index f82e821..2f962cf 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -212,6 +212,9 @@ static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_devi
 	    (!(PCI_FUNC(dev->devfn) & 1)))
 		goto out;
 
+	if (dev->vendor == PCI_VENDOR_ID_JMICRON && PCI_FUNC(dev->devfn) != 1)
+		goto out;
+
 	pci_read_config_word(dev, PCI_COMMAND, &command);
 	if (!(command & PCI_COMMAND_IO)) {
 		printk(KERN_INFO "Skipping disabled %s IDE controller.\n", d->name);
@@ -239,6 +242,11 @@ static struct pci_device_id generic_pci_tbl[] = {
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
 	{ PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION,          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15},
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16},
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17},
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18},
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19},
 	/* Must come last. If you add entries adjust this table appropriately and the init_one code */
 	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
 	{ 0, },
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 3f6705f..f85c97f 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -701,7 +701,7 @@ static void cm_reset_to_idle(struct cm_id_private *cm_id_priv)
 	}
 }
 
-void ib_destroy_cm_id(struct ib_cm_id *cm_id)
+static void cm_destroy_id(struct ib_cm_id *cm_id, int err)
 {
 	struct cm_id_private *cm_id_priv;
 	struct cm_work *work;
@@ -735,12 +735,22 @@ retest:
 			       sizeof cm_id_priv->av.port->cm_dev->ca_guid,
 			       NULL, 0);
 		break;
+	case IB_CM_REQ_RCVD:
+		if (err == -ENOMEM) {
+			/* Do not reject to allow future retries. */
+			cm_reset_to_idle(cm_id_priv);
+			spin_unlock_irqrestore(&cm_id_priv->lock, flags);
+		} else {
+			spin_unlock_irqrestore(&cm_id_priv->lock, flags);
+			ib_send_cm_rej(cm_id, IB_CM_REJ_CONSUMER_DEFINED,
+				       NULL, 0, NULL, 0);
+		}
+		break;
 	case IB_CM_MRA_REQ_RCVD:
 	case IB_CM_REP_SENT:
 	case IB_CM_MRA_REP_RCVD:
 		ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
 		/* Fall through */
-	case IB_CM_REQ_RCVD:
 	case IB_CM_MRA_REQ_SENT:
 	case IB_CM_REP_RCVD:
 	case IB_CM_MRA_REP_SENT:
@@ -775,6 +785,11 @@ retest:
 	kfree(cm_id_priv->private_data);
 	kfree(cm_id_priv);
 }
+
+void ib_destroy_cm_id(struct ib_cm_id *cm_id)
+{
+	cm_destroy_id(cm_id, 0);
+}
 EXPORT_SYMBOL(ib_destroy_cm_id);
 
 int ib_cm_listen(struct ib_cm_id *cm_id, __be64 service_id, __be64 service_mask,
@@ -1163,7 +1178,7 @@ static void cm_process_work(struct cm_id_private *cm_id_priv,
 	}
 	cm_deref_id(cm_id_priv);
 	if (ret)
-		ib_destroy_cm_id(&cm_id_priv->id);
+		cm_destroy_id(&cm_id_priv->id, ret);
 }
 
 static void cm_format_mra(struct cm_mra_msg *mra_msg,
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 863f64b..d6f99d5 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -262,14 +262,14 @@ static void cma_detach_from_dev(struct rdma_id_private *id_priv)
 static int cma_acquire_ib_dev(struct rdma_id_private *id_priv)
 {
 	struct cma_device *cma_dev;
-	union ib_gid *gid;
+	union ib_gid gid;
 	int ret = -ENODEV;
 
-	gid = ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr);
+	ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid),
 
 	mutex_lock(&lock);
 	list_for_each_entry(cma_dev, &dev_list, list) {
-		ret = ib_find_cached_gid(cma_dev->device, gid,
+		ret = ib_find_cached_gid(cma_dev->device, &gid,
 					 &id_priv->id.port_num, NULL);
 		if (!ret) {
 			cma_attach_to_dev(id_priv, cma_dev);
@@ -812,6 +812,7 @@ static int cma_ib_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event)
 		cma_modify_qp_err(&id_priv->id);
 		status = ib_event->param.rej_rcvd.reason;
 		event = RDMA_CM_EVENT_REJECTED;
+		private_data_len = IB_CM_REJ_PRIVATE_DATA_SIZE;
 		break;
 	default:
 		printk(KERN_ERR "RDMA CMA: unexpected IB CM event: %d",
@@ -1134,8 +1135,8 @@ static int cma_query_ib_route(struct rdma_id_private *id_priv, int timeout_ms,
 	struct ib_sa_path_rec path_rec;
 
 	memset(&path_rec, 0, sizeof path_rec);
-	path_rec.sgid = *ib_addr_get_sgid(addr);
-	path_rec.dgid = *ib_addr_get_dgid(addr);
+	ib_addr_get_sgid(addr, &path_rec.sgid);
+	ib_addr_get_dgid(addr, &path_rec.dgid);
 	path_rec.pkey = cpu_to_be16(ib_addr_get_pkey(addr));
 	path_rec.numb_path = 1;
 
@@ -1263,7 +1264,7 @@ static int cma_bind_loopback(struct rdma_id_private *id_priv)
 {
 	struct cma_device *cma_dev;
 	struct ib_port_attr port_attr;
-	union ib_gid *gid;
+	union ib_gid gid;
 	u16 pkey;
 	int ret;
 	u8 p;
@@ -1284,8 +1285,7 @@ static int cma_bind_loopback(struct rdma_id_private *id_priv)
 	}
 
 port_found:
-	gid = ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr);
-	ret = ib_get_cached_gid(cma_dev->device, p, 0, gid);
+	ret = ib_get_cached_gid(cma_dev->device, p, 0, &gid);
 	if (ret)
 		goto out;
 
@@ -1293,6 +1293,7 @@ port_found:
 	if (ret)
 		goto out;
 
+	ib_addr_set_sgid(&id_priv->id.route.addr.dev_addr, &gid);
 	ib_addr_set_pkey(&id_priv->id.route.addr.dev_addr, pkey);
 	id_priv->id.port_num = p;
 	cma_attach_to_dev(id_priv, cma_dev);
@@ -1339,6 +1340,7 @@ static int cma_resolve_loopback(struct rdma_id_private *id_priv)
 {
 	struct cma_work *work;
 	struct sockaddr_in *src_in, *dst_in;
+	union ib_gid gid;
 	int ret;
 
 	work = kzalloc(sizeof *work, GFP_KERNEL);
@@ -1351,8 +1353,8 @@ static int cma_resolve_loopback(struct rdma_id_private *id_priv)
 			goto err;
 	}
 
-	ib_addr_set_dgid(&id_priv->id.route.addr.dev_addr,
-			 ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr));
+	ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid);
+	ib_addr_set_dgid(&id_priv->id.route.addr.dev_addr, &gid);
 
 	if (cma_zero_addr(&id_priv->id.route.addr.src_addr)) {
 		src_in = (struct sockaddr_in *)&id_priv->id.route.addr.src_addr;
diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c
index 615fe9c..86a3b2d 100644
--- a/drivers/infiniband/core/fmr_pool.c
+++ b/drivers/infiniband/core/fmr_pool.c
@@ -426,7 +426,7 @@ EXPORT_SYMBOL(ib_flush_fmr_pool);
 struct ib_pool_fmr *ib_fmr_pool_map_phys(struct ib_fmr_pool *pool_handle,
 					 u64                *page_list,
 					 int                 list_len,
-					 u64                *io_virtual_address)
+					 u64                 io_virtual_address)
 {
 	struct ib_fmr_pool *pool = pool_handle;
 	struct ib_pool_fmr *fmr;
@@ -440,7 +440,7 @@ struct ib_pool_fmr *ib_fmr_pool_map_phys(struct ib_fmr_pool *pool_handle,
 	fmr = ib_fmr_cache_lookup(pool,
 				  page_list,
 				  list_len,
-				  *io_virtual_address);
+				  io_virtual_address);
 	if (fmr) {
 		/* found in cache */
 		++fmr->ref_count;
@@ -464,7 +464,7 @@ struct ib_pool_fmr *ib_fmr_pool_map_phys(struct ib_fmr_pool *pool_handle,
 	spin_unlock_irqrestore(&pool->pool_lock, flags);
 
 	result = ib_map_phys_fmr(fmr->fmr, page_list, list_len,
-				 *io_virtual_address);
+				 io_virtual_address);
 
 	if (result) {
 		spin_lock_irqsave(&pool->pool_lock, flags);
@@ -481,7 +481,7 @@ struct ib_pool_fmr *ib_fmr_pool_map_phys(struct ib_fmr_pool *pool_handle,
 	fmr->ref_count = 1;
 
 	if (pool->cache_bucket) {
-		fmr->io_virtual_address = *io_virtual_address;
+		fmr->io_virtual_address = io_virtual_address;
 		fmr->page_list_len      = list_len;
 		memcpy(fmr->page_list, page_list, list_len * sizeof(*page_list));
 
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index e911c99..aeda484 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -488,13 +488,13 @@ static void init_mad(struct ib_sa_mad *mad, struct ib_mad_agent *agent)
 	spin_unlock_irqrestore(&tid_lock, flags);
 }
 
-static int send_mad(struct ib_sa_query *query, int timeout_ms)
+static int send_mad(struct ib_sa_query *query, int timeout_ms, gfp_t gfp_mask)
 {
 	unsigned long flags;
 	int ret, id;
 
 retry:
-	if (!idr_pre_get(&query_idr, GFP_ATOMIC))
+	if (!idr_pre_get(&query_idr, gfp_mask))
 		return -ENOMEM;
 	spin_lock_irqsave(&idr_lock, flags);
 	ret = idr_get_new(&query_idr, query, &id);
@@ -630,7 +630,7 @@ int ib_sa_path_rec_get(struct ib_device *device, u8 port_num,
 
 	*sa_query = &query->sa_query;
 
-	ret = send_mad(&query->sa_query, timeout_ms);
+	ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
 	if (ret < 0)
 		goto err2;
 
@@ -752,7 +752,7 @@ int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, u8 method,
 
 	*sa_query = &query->sa_query;
 
-	ret = send_mad(&query->sa_query, timeout_ms);
+	ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
 	if (ret < 0)
 		goto err2;
 
@@ -844,7 +844,7 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num,
 
 	*sa_query = &query->sa_query;
 
-	ret = send_mad(&query->sa_query, timeout_ms);
+	ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
 	if (ret < 0)
 		goto err2;
 
diff --git a/drivers/infiniband/hw/mthca/mthca_av.c b/drivers/infiniband/hw/mthca/mthca_av.c
index b12aa03..e215041 100644
--- a/drivers/infiniband/hw/mthca/mthca_av.c
+++ b/drivers/infiniband/hw/mthca/mthca_av.c
@@ -303,9 +303,10 @@ int mthca_ah_query(struct ib_ah *ibah, struct ib_ah_attr *attr)
 	memset(attr, 0, sizeof *attr);
 	attr->dlid          = be16_to_cpu(ah->av->dlid);
 	attr->sl            = be32_to_cpu(ah->av->sl_tclass_flowlabel) >> 28;
-	attr->static_rate   = ah->av->msg_sr & 0x7;
-	attr->src_path_bits = ah->av->g_slid & 0x7F;
 	attr->port_num      = be32_to_cpu(ah->av->port_pd) >> 24;
+	attr->static_rate   = mthca_rate_to_ib(dev, ah->av->msg_sr & 0x7,
+					       attr->port_num);
+	attr->src_path_bits = ah->av->g_slid & 0x7F;
 	attr->ah_flags      = mthca_ah_grh_present(ah) ? IB_AH_GRH : 0;
 
 	if (attr->ah_flags) {
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 490fc78..cd8b672 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -222,9 +222,8 @@ static void *get_send_wqe(struct mthca_qp *qp, int n)
 			 (PAGE_SIZE - 1));
 }
 
-static void mthca_wq_init(struct mthca_wq *wq)
+static void mthca_wq_reset(struct mthca_wq *wq)
 {
-	/* mthca_alloc_qp_common() initializes the locks */
 	wq->next_ind  = 0;
 	wq->last_comp = wq->max - 1;
 	wq->head      = 0;
@@ -845,10 +844,10 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
 			mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq), qp->qpn,
 				       qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
 
-		mthca_wq_init(&qp->sq);
+		mthca_wq_reset(&qp->sq);
 		qp->sq.last = get_send_wqe(qp, qp->sq.max - 1);
 
-		mthca_wq_init(&qp->rq);
+		mthca_wq_reset(&qp->rq);
 		qp->rq.last = get_recv_wqe(qp, qp->rq.max - 1);
 
 		if (mthca_is_memfree(dev)) {
@@ -1112,9 +1111,9 @@ static int mthca_alloc_qp_common(struct mthca_dev *dev,
 	qp->atomic_rd_en = 0;
 	qp->resp_depth   = 0;
 	qp->sq_policy    = send_policy;
-	mthca_wq_init(&qp->sq);
-	mthca_wq_init(&qp->rq);
-	/* these are initialized separately so lockdep can tell them apart */
+	mthca_wq_reset(&qp->sq);
+	mthca_wq_reset(&qp->rq);
+
 	spin_lock_init(&qp->sq.lock);
 	spin_lock_init(&qp->rq.lock);
 
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index ff117bb..72febf1 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -594,7 +594,7 @@ int iser_reg_page_vec(struct iser_conn     *ib_conn,
 	mem  = ib_fmr_pool_map_phys(ib_conn->fmr_pool,
 				    page_list,
 				    page_vec->length,
-				    &io_addr);
+				    io_addr);
 
 	if (IS_ERR(mem)) {
 		status = (int)PTR_ERR(mem);
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 4e22afef..8f472e7 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -615,9 +615,10 @@ static int srp_map_fmr(struct srp_device *dev, struct scatterlist *scat,
 				(sg_dma_address(&scat[i]) & dev->fmr_page_mask) + j;
 
 	req->fmr = ib_fmr_pool_map_phys(dev->fmr_pool,
-					dma_pages, page_cnt, &io_addr);
+					dma_pages, page_cnt, io_addr);
 	if (IS_ERR(req->fmr)) {
 		ret = PTR_ERR(req->fmr);
+		req->fmr = NULL;
 		goto out;
 	}
 
diff --git a/drivers/isdn/hisax/asuscom.c b/drivers/isdn/hisax/asuscom.c
index a98c5e3..93ff941 100644
--- a/drivers/isdn/hisax/asuscom.c
+++ b/drivers/isdn/hisax/asuscom.c
@@ -297,7 +297,7 @@ Asus_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 }
 
 #ifdef __ISAPNP__
-static struct isapnp_device_id asus_ids[] __initdata = {
+static struct isapnp_device_id asus_ids[] __devinitdata = {
 	{ ISAPNP_VENDOR('A', 'S', 'U'), ISAPNP_FUNCTION(0x1688),
 	  ISAPNP_VENDOR('A', 'S', 'U'), ISAPNP_FUNCTION(0x1688), 
 	  (unsigned long) "Asus1688 PnP" },
@@ -313,11 +313,11 @@ static struct isapnp_device_id asus_ids[] __initdata = {
 	{ 0, }
 };
 
-static struct isapnp_device_id *ipid __initdata = &asus_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &asus_ids[0];
 static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
-int __init
+int __devinit
 setup_asuscom(struct IsdnCard *card)
 {
 	int bytecnt;
diff --git a/drivers/isdn/hisax/avm_a1.c b/drivers/isdn/hisax/avm_a1.c
index 9a8b025..729e906b 100644
--- a/drivers/isdn/hisax/avm_a1.c
+++ b/drivers/isdn/hisax/avm_a1.c
@@ -178,7 +178,7 @@ AVM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return(0);
 }
 
-int __init
+int __devinit
 setup_avm_a1(struct IsdnCard *card)
 {
 	u_char val;
diff --git a/drivers/isdn/hisax/avm_pci.c b/drivers/isdn/hisax/avm_pci.c
index 04f5917..369afd3 100644
--- a/drivers/isdn/hisax/avm_pci.c
+++ b/drivers/isdn/hisax/avm_pci.c
@@ -639,7 +639,7 @@ clear_pending_hdlc_ints(struct IsdnCardState *cs)
 }
 #endif  /*  0  */
 
-static void __init
+static void
 inithdlc(struct IsdnCardState *cs)
 {
 	cs->bcs[0].BC_SetStack = setstack_hdlc;
@@ -727,13 +727,13 @@ AVM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 }
 
 #ifdef CONFIG_PCI
-static struct pci_dev *dev_avm __initdata = NULL;
+static struct pci_dev *dev_avm __devinitdata = NULL;
 #endif
 #ifdef __ISAPNP__
-static struct pnp_card *pnp_avm_c __initdata = NULL;
+static struct pnp_card *pnp_avm_c __devinitdata = NULL;
 #endif
 
-int __init
+int __devinit
 setup_avm_pcipnp(struct IsdnCard *card)
 {
 	u_int val, ver;
diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c
index 3cf1f24..87a6301 100644
--- a/drivers/isdn/hisax/bkm_a4t.c
+++ b/drivers/isdn/hisax/bkm_a4t.c
@@ -255,9 +255,9 @@ BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return (0);
 }
 
-static struct pci_dev *dev_a4t __initdata = NULL;
+static struct pci_dev *dev_a4t __devinitdata = NULL;
 
-int __init
+int __devinit
 setup_bkm_a4t(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index 15681f3..dae090a 100644
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -260,7 +260,7 @@ BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return (0);
 }
 
-static int __init
+static int __devinit
 sct_alloc_io(u_int adr, u_int len)
 {
 	if (!request_region(adr, len, "scitel")) {
@@ -272,16 +272,16 @@ sct_alloc_io(u_int adr, u_int len)
 	return(0);
 }
 
-static struct pci_dev *dev_a8 __initdata = NULL;
-static u16  sub_vendor_id __initdata = 0;
-static u16  sub_sys_id __initdata = 0;
-static u_char pci_bus __initdata = 0;
-static u_char pci_device_fn __initdata = 0;
-static u_char pci_irq __initdata = 0;
+static struct pci_dev *dev_a8 __devinitdata = NULL;
+static u16  sub_vendor_id __devinitdata = 0;
+static u16  sub_sys_id __devinitdata = 0;
+static u_char pci_bus __devinitdata = 0;
+static u_char pci_device_fn __devinitdata = 0;
+static u_char pci_irq __devinitdata = 0;
 
 #endif /* CONFIG_PCI */
 
-int __init
+int __devinit
 setup_sct_quadro(struct IsdnCard *card)
 {
 #ifdef CONFIG_PCI
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index 5333be5..e103503 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -1875,7 +1875,7 @@ static void EChannel_proc_rcv(struct hisax_d_if *d_if)
 #ifdef CONFIG_PCI
 #include <linux/pci.h>
 
-static struct pci_device_id hisax_pci_tbl[] __initdata = {
+static struct pci_device_id hisax_pci_tbl[] __devinitdata = {
 #ifdef CONFIG_HISAX_FRITZPCI
 	{PCI_VENDOR_ID_AVM,      PCI_DEVICE_ID_AVM_A1,           PCI_ANY_ID, PCI_ANY_ID},
 #endif
diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c
index 323a02e..e294fa3 100644
--- a/drivers/isdn/hisax/diva.c
+++ b/drivers/isdn/hisax/diva.c
@@ -887,13 +887,13 @@ Diva_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return(0);
 }
 
-static struct pci_dev *dev_diva __initdata = NULL;
-static struct pci_dev *dev_diva_u __initdata = NULL;
-static struct pci_dev *dev_diva201 __initdata = NULL;
-static struct pci_dev *dev_diva202 __initdata = NULL;
+static struct pci_dev *dev_diva __devinitdata = NULL;
+static struct pci_dev *dev_diva_u __devinitdata = NULL;
+static struct pci_dev *dev_diva201 __devinitdata = NULL;
+static struct pci_dev *dev_diva202 __devinitdata = NULL;
 
 #ifdef __ISAPNP__
-static struct isapnp_device_id diva_ids[] __initdata = {
+static struct isapnp_device_id diva_ids[] __devinitdata = {
 	{ ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x51),
 	  ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x51), 
 	  (unsigned long) "Diva picola" },
@@ -915,12 +915,12 @@ static struct isapnp_device_id diva_ids[] __initdata = {
 	{ 0, }
 };
 
-static struct isapnp_device_id *ipid __initdata = &diva_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &diva_ids[0];
 static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
 
-int __init
+int __devinit
 setup_diva(struct IsdnCard *card)
 {
 	int bytecnt = 8;
diff --git a/drivers/isdn/hisax/enternow_pci.c b/drivers/isdn/hisax/enternow_pci.c
index 8fcbe2e..76c7d29 100644
--- a/drivers/isdn/hisax/enternow_pci.c
+++ b/drivers/isdn/hisax/enternow_pci.c
@@ -301,10 +301,10 @@ enpci_interrupt(int intno, void *dev_id, struct pt_regs *regs)
 }
 
 
-static struct pci_dev *dev_netjet __initdata = NULL;
+static struct pci_dev *dev_netjet __devinitdata = NULL;
 
 /* called by config.c */
-int __init
+int __devinit
 setup_enternow_pci(struct IsdnCard *card)
 {
 	int bytecnt;
diff --git a/drivers/isdn/hisax/gazel.c b/drivers/isdn/hisax/gazel.c
index 3e7d923..fe29372 100644
--- a/drivers/isdn/hisax/gazel.c
+++ b/drivers/isdn/hisax/gazel.c
@@ -484,7 +484,7 @@ reserve_regions(struct IsdnCard *card, struct IsdnCardState *cs)
 	return 1;
 }
 
-static int __init
+static int __devinit
 setup_gazelisa(struct IsdnCard *card, struct IsdnCardState *cs)
 {
 	printk(KERN_INFO "Gazel: ISA PnP card automatic recognition\n");
@@ -532,9 +532,9 @@ setup_gazelisa(struct IsdnCard *card, struct IsdnCardState *cs)
 	return (0);
 }
 
-static struct pci_dev *dev_tel __initdata = NULL;
+static struct pci_dev *dev_tel __devinitdata = NULL;
 
-static int __init
+static int __devinit
 setup_gazelpci(struct IsdnCardState *cs)
 {
 	u_int pci_ioaddr0 = 0, pci_ioaddr1 = 0;
@@ -621,7 +621,7 @@ setup_gazelpci(struct IsdnCardState *cs)
 	return (0);
 }
 
-int __init
+int __devinit
 setup_gazel(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c
index 0f967b3..3a5ca8a 100644
--- a/drivers/isdn/hisax/hfc4s8s_l1.c
+++ b/drivers/isdn/hisax/hfc4s8s_l1.c
@@ -1703,7 +1703,7 @@ hfc4s8s_module_init(void)
 /* driver module exit :              */
 /* release the HFC-4s/8s hardware    */
 /*************************************/
-static void
+static void __exit
 hfc4s8s_module_exit(void)
 {
 	pci_unregister_driver(&hfc4s8s_driver);
diff --git a/drivers/isdn/hisax/hfc_2bds0.c b/drivers/isdn/hisax/hfc_2bds0.c
index 637a261..6360e82 100644
--- a/drivers/isdn/hisax/hfc_2bds0.c
+++ b/drivers/isdn/hisax/hfc_2bds0.c
@@ -1015,7 +1015,7 @@ hfc_dbusy_timer(struct IsdnCardState *cs)
 {
 }
 
-static unsigned int __init
+static unsigned int
 *init_send_hfcd(int cnt)
 {
 	int i, *send;
@@ -1030,7 +1030,7 @@ static unsigned int __init
 	return(send);
 }
 
-void __init
+void
 init2bds0(struct IsdnCardState *cs)
 {
 	cs->setstack_d = setstack_hfcd;
diff --git a/drivers/isdn/hisax/hfc_2bs0.c b/drivers/isdn/hisax/hfc_2bs0.c
index c964539..d0520ad 100644
--- a/drivers/isdn/hisax/hfc_2bs0.c
+++ b/drivers/isdn/hisax/hfc_2bs0.c
@@ -551,7 +551,7 @@ setstack_hfc(struct PStack *st, struct BCState *bcs)
 	return (0);
 }
 
-static void __init
+static void
 init_send(struct BCState *bcs)
 {
 	int i;
@@ -565,7 +565,7 @@ init_send(struct BCState *bcs)
 		bcs->hw.hfc.send[i] = 0x1fff;
 }
 
-void __init
+void
 inithfc(struct IsdnCardState *cs)
 {
 	init_send(&cs->bcs[0]);
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 7241e73..1df60ca 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -1581,7 +1581,7 @@ hfcpci_bh(struct IsdnCardState *cs)
 /********************************/
 /* called for card init message */
 /********************************/
-static void __init
+static void
 inithfcpci(struct IsdnCardState *cs)
 {
 	cs->bcs[0].BC_SetStack = setstack_2b;
@@ -1638,11 +1638,11 @@ hfcpci_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 
 
 /* this variable is used as card index when more than one cards are present */
-static struct pci_dev *dev_hfcpci __initdata = NULL;
+static struct pci_dev *dev_hfcpci __devinitdata = NULL;
 
 #endif				/* CONFIG_PCI */
 
-int __init
+int __devinit
 setup_hfcpci(struct IsdnCard *card)
 {
 	u_long flags;
diff --git a/drivers/isdn/hisax/hfcscard.c b/drivers/isdn/hisax/hfcscard.c
index 86ab1c1..4e7f472 100644
--- a/drivers/isdn/hisax/hfcscard.c
+++ b/drivers/isdn/hisax/hfcscard.c
@@ -139,7 +139,7 @@ hfcs_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 }
 
 #ifdef __ISAPNP__
-static struct isapnp_device_id hfc_ids[] __initdata = {
+static struct isapnp_device_id hfc_ids[] __devinitdata = {
 	{ ISAPNP_VENDOR('A', 'N', 'X'), ISAPNP_FUNCTION(0x1114),
 	  ISAPNP_VENDOR('A', 'N', 'X'), ISAPNP_FUNCTION(0x1114), 
 	  (unsigned long) "Acer P10" },
@@ -164,11 +164,11 @@ static struct isapnp_device_id hfc_ids[] __initdata = {
 	{ 0, }
 };
 
-static struct isapnp_device_id *ipid __initdata = &hfc_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &hfc_ids[0];
 static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
-int __init
+int __devinit
 setup_hfcs(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff --git a/drivers/isdn/hisax/icc.c b/drivers/isdn/hisax/icc.c
index c615752..2cf7b66 100644
--- a/drivers/isdn/hisax/icc.c
+++ b/drivers/isdn/hisax/icc.c
@@ -24,10 +24,10 @@
 #define DBUSY_TIMER_VALUE 80
 #define ARCOFI_USE 0
 
-static char *ICCVer[] __initdata =
+static char *ICCVer[] =
 {"2070 A1/A3", "2070 B1", "2070 B2/B3", "2070 V2.4"};
 
-void __init
+void
 ICCVersion(struct IsdnCardState *cs, char *s)
 {
 	int val;
@@ -613,7 +613,7 @@ dbusy_timer_handler(struct IsdnCardState *cs)
 	}
 }
 
-void __init
+void
 initicc(struct IsdnCardState *cs)
 {
 	cs->setstack_d = setstack_icc;
@@ -646,7 +646,7 @@ initicc(struct IsdnCardState *cs)
 	ph_command(cs, ICC_CMD_DI);
 }
 
-void __init
+void
 clear_pending_icc_ints(struct IsdnCardState *cs)
 {
 	int val, eval;
diff --git a/drivers/isdn/hisax/icc.h b/drivers/isdn/hisax/icc.h
index b3bb3d5..e7f5939 100644
--- a/drivers/isdn/hisax/icc.h
+++ b/drivers/isdn/hisax/icc.h
@@ -65,7 +65,7 @@
 #define ICC_IND_AIL    0xE
 #define ICC_IND_DC     0xF
 
-extern void __init ICCVersion(struct IsdnCardState *cs, char *s);
+extern void ICCVersion(struct IsdnCardState *cs, char *s);
 extern void initicc(struct IsdnCardState *cs);
 extern void icc_interrupt(struct IsdnCardState *cs, u_char val);
 extern void clear_pending_icc_ints(struct IsdnCardState *cs);
diff --git a/drivers/isdn/hisax/ipacx.c b/drivers/isdn/hisax/ipacx.c
index df5fc92..00afd55 100644
--- a/drivers/isdn/hisax/ipacx.c
+++ b/drivers/isdn/hisax/ipacx.c
@@ -38,8 +38,8 @@ static void dbusy_timer_handler(struct IsdnCardState *cs);
 static void dch_empty_fifo(struct IsdnCardState *cs, int count);
 static void dch_fill_fifo(struct IsdnCardState *cs);
 static inline void dch_int(struct IsdnCardState *cs);
-static void __devinit dch_setstack(struct PStack *st, struct IsdnCardState *cs);
-static void __devinit dch_init(struct IsdnCardState *cs);
+static void dch_setstack(struct PStack *st, struct IsdnCardState *cs);
+static void dch_init(struct IsdnCardState *cs);
 static void bch_l2l1(struct PStack *st, int pr, void *arg);
 static void bch_empty_fifo(struct BCState *bcs, int count);
 static void bch_fill_fifo(struct BCState *bcs);
@@ -48,8 +48,8 @@ static void bch_mode(struct BCState *bcs, int mode, int bc);
 static void bch_close_state(struct BCState *bcs);
 static int bch_open_state(struct IsdnCardState *cs, struct BCState *bcs);
 static int bch_setstack(struct PStack *st, struct BCState *bcs);
-static void __devinit bch_init(struct IsdnCardState *cs, int hscx);
-static void __init clear_pending_ints(struct IsdnCardState *cs);
+static void bch_init(struct IsdnCardState *cs, int hscx);
+static void clear_pending_ints(struct IsdnCardState *cs);
 
 //----------------------------------------------------------
 // Issue Layer 1 command to chip
@@ -408,7 +408,7 @@ dch_int(struct IsdnCardState *cs)
 
 //----------------------------------------------------------
 //----------------------------------------------------------
-static void __devinit
+static void
 dch_setstack(struct PStack *st, struct IsdnCardState *cs)
 {
 	st->l1.l1hw = dch_l2l1;
@@ -416,7 +416,7 @@ dch_setstack(struct PStack *st, struct IsdnCardState *cs)
 
 //----------------------------------------------------------
 //----------------------------------------------------------
-static void __devinit
+static void
 dch_init(struct IsdnCardState *cs)
 {
 	printk(KERN_INFO "HiSax: IPACX ISDN driver v0.1.0\n");
@@ -823,7 +823,7 @@ bch_setstack(struct PStack *st, struct BCState *bcs)
 
 //----------------------------------------------------------
 //----------------------------------------------------------
-static void __devinit
+static void
 bch_init(struct IsdnCardState *cs, int hscx)
 {
 	cs->bcs[hscx].BC_SetStack   = bch_setstack;
@@ -861,7 +861,7 @@ interrupt_ipacx(struct IsdnCardState *cs)
 //----------------------------------------------------------
 // Clears chip interrupt status
 //----------------------------------------------------------
-static void __init
+static void
 clear_pending_ints(struct IsdnCardState *cs)
 {
 	int ista;
@@ -883,7 +883,7 @@ clear_pending_ints(struct IsdnCardState *cs)
 // Does chip configuration work
 // Work to do depends on bit mask in part
 //----------------------------------------------------------
-void __init
+void
 init_ipacx(struct IsdnCardState *cs, int part)
 {
 	if (part &1) {  // initialise chip
diff --git a/drivers/isdn/hisax/isurf.c b/drivers/isdn/hisax/isurf.c
index 33747af..715a1a8 100644
--- a/drivers/isdn/hisax/isurf.c
+++ b/drivers/isdn/hisax/isurf.c
@@ -196,10 +196,10 @@ isurf_auxcmd(struct IsdnCardState *cs, isdn_ctrl *ic) {
 }
 
 #ifdef __ISAPNP__
-static struct pnp_card *pnp_c __initdata = NULL;
+static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
-int __init
+int __devinit
 setup_isurf(struct IsdnCard *card)
 {
 	int ver;
diff --git a/drivers/isdn/hisax/ix1_micro.c b/drivers/isdn/hisax/ix1_micro.c
index 908a7e1..3971750 100644
--- a/drivers/isdn/hisax/ix1_micro.c
+++ b/drivers/isdn/hisax/ix1_micro.c
@@ -210,7 +210,7 @@ ix1_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 }
 
 #ifdef __ISAPNP__
-static struct isapnp_device_id itk_ids[] __initdata = {
+static struct isapnp_device_id itk_ids[] __devinitdata = {
 	{ ISAPNP_VENDOR('I', 'T', 'K'), ISAPNP_FUNCTION(0x25),
 	  ISAPNP_VENDOR('I', 'T', 'K'), ISAPNP_FUNCTION(0x25), 
 	  (unsigned long) "ITK micro 2" },
@@ -220,12 +220,12 @@ static struct isapnp_device_id itk_ids[] __initdata = {
 	{ 0, }
 };
 
-static struct isapnp_device_id *ipid __initdata = &itk_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &itk_ids[0];
 static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
 
-int __init
+int __devinit
 setup_ix1micro(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff --git a/drivers/isdn/hisax/jade.c b/drivers/isdn/hisax/jade.c
index 2659fec..43d61d1 100644
--- a/drivers/isdn/hisax/jade.c
+++ b/drivers/isdn/hisax/jade.c
@@ -19,7 +19,7 @@
 #include <linux/interrupt.h>
 
 
-int __init
+int
 JadeVersion(struct IsdnCardState *cs, char *s)
 {
     int ver,i;
@@ -253,7 +253,7 @@ setstack_jade(struct PStack *st, struct BCState *bcs)
 	return (0);
 }
 
-void __init
+void
 clear_pending_jade_ints(struct IsdnCardState *cs)
 {
 	int val;
@@ -279,7 +279,7 @@ clear_pending_jade_ints(struct IsdnCardState *cs)
 	cs->BC_Write_Reg(cs, 1, jade_HDLC_IMR, 0xF8);
 }
 
-void __init
+void
 initjade(struct IsdnCardState *cs)
 {
 	cs->bcs[0].BC_SetStack = setstack_jade;
diff --git a/drivers/isdn/hisax/mic.c b/drivers/isdn/hisax/mic.c
index fe11f22..8c82519 100644
--- a/drivers/isdn/hisax/mic.c
+++ b/drivers/isdn/hisax/mic.c
@@ -189,7 +189,7 @@ mic_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return(0);
 }
 
-int __init
+int __devinit
 setup_mic(struct IsdnCard *card)
 {
 	int bytecnt;
diff --git a/drivers/isdn/hisax/netjet.c b/drivers/isdn/hisax/netjet.c
index 47a47ef..38f648f 100644
--- a/drivers/isdn/hisax/netjet.c
+++ b/drivers/isdn/hisax/netjet.c
@@ -909,7 +909,7 @@ setstack_tiger(struct PStack *st, struct BCState *bcs)
 }
 
  
-void __init
+void
 inittiger(struct IsdnCardState *cs)
 {
 	if (!(cs->bcs[0].hw.tiger.send = kmalloc(NETJET_DMA_TXSIZE * sizeof(unsigned int),
diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c
index 79a97b1..489022b 100644
--- a/drivers/isdn/hisax/niccy.c
+++ b/drivers/isdn/hisax/niccy.c
@@ -232,12 +232,12 @@ niccy_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return(0);
 }
 
-static struct pci_dev *niccy_dev __initdata = NULL;
+static struct pci_dev *niccy_dev __devinitdata = NULL;
 #ifdef __ISAPNP__
 static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
-int __init
+int __devinit
 setup_niccy(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index e5b900a..80025fd 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -148,9 +148,9 @@ NETjet_S_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return(0);
 }
 
-static struct pci_dev *dev_netjet __initdata = NULL;
+static struct pci_dev *dev_netjet __devinitdata = NULL;
 
-int __init
+int __devinit
 setup_netjet_s(struct IsdnCard *card)
 {
 	int bytecnt,cfg;
diff --git a/drivers/isdn/hisax/nj_u.c b/drivers/isdn/hisax/nj_u.c
index 7002b09..3749716 100644
--- a/drivers/isdn/hisax/nj_u.c
+++ b/drivers/isdn/hisax/nj_u.c
@@ -128,9 +128,9 @@ NETjet_U_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return(0);
 }
 
-static struct pci_dev *dev_netjet __initdata = NULL;
+static struct pci_dev *dev_netjet __devinitdata = NULL;
 
-int __init
+int __devinit
 setup_netjet_u(struct IsdnCard *card)
 {
 	int bytecnt;
diff --git a/drivers/isdn/hisax/s0box.c b/drivers/isdn/hisax/s0box.c
index 7b63085..e76042d 100644
--- a/drivers/isdn/hisax/s0box.c
+++ b/drivers/isdn/hisax/s0box.c
@@ -211,7 +211,7 @@ S0Box_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return(0);
 }
 
-int __init
+int __devinit
 setup_s0box(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff --git a/drivers/isdn/hisax/saphir.c b/drivers/isdn/hisax/saphir.c
index 821776e..d943d36 100644
--- a/drivers/isdn/hisax/saphir.c
+++ b/drivers/isdn/hisax/saphir.c
@@ -241,7 +241,7 @@ saphir_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 }
 
 
-int __init
+int __devinit
 setup_saphir(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff --git a/drivers/isdn/hisax/sportster.c b/drivers/isdn/hisax/sportster.c
index cdf35dc..a49b694 100644
--- a/drivers/isdn/hisax/sportster.c
+++ b/drivers/isdn/hisax/sportster.c
@@ -184,7 +184,7 @@ Sportster_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return(0);
 }
 
-static int __init
+static int __devinit
 get_io_range(struct IsdnCardState *cs)
 {
 	int i, j, adr;
@@ -209,7 +209,7 @@ get_io_range(struct IsdnCardState *cs)
 	}
 }
 
-int __init
+int __devinit
 setup_sportster(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff --git a/drivers/isdn/hisax/teleint.c b/drivers/isdn/hisax/teleint.c
index a2b1816..e94dc6f 100644
--- a/drivers/isdn/hisax/teleint.c
+++ b/drivers/isdn/hisax/teleint.c
@@ -261,7 +261,7 @@ TeleInt_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return(0);
 }
 
-int __init
+int __devinit
 setup_TeleInt(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff --git a/drivers/isdn/hisax/teles0.c b/drivers/isdn/hisax/teles0.c
index 2b7df8f..f94af09 100644
--- a/drivers/isdn/hisax/teles0.c
+++ b/drivers/isdn/hisax/teles0.c
@@ -265,7 +265,7 @@ Teles_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return(0);
 }
 
-int __init
+int __devinit
 setup_teles0(struct IsdnCard *card)
 {
 	u_char val;
diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c
index 9382cdf..dca4468 100644
--- a/drivers/isdn/hisax/telespci.c
+++ b/drivers/isdn/hisax/telespci.c
@@ -284,9 +284,9 @@ TelesPCI_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	return(0);
 }
 
-static struct pci_dev *dev_tel __initdata = NULL;
+static struct pci_dev *dev_tel __devinitdata = NULL;
 
-int __init
+int __devinit
 setup_telespci(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c
index 6c68419..0595293 100644
--- a/drivers/isdn/hisax/w6692.c
+++ b/drivers/isdn/hisax/w6692.c
@@ -44,11 +44,11 @@ static const char *w6692_revision = "$Revision: 1.18.2.4 $";
 
 #define DBUSY_TIMER_VALUE 80
 
-static char *W6692Ver[] __initdata =
+static char *W6692Ver[] =
 {"W6692 V00", "W6692 V01", "W6692 V10",
  "W6692 V11"};
 
-static void __init
+static void
 W6692Version(struct IsdnCardState *cs, char *s)
 {
 	int val;
@@ -897,7 +897,7 @@ static void resetW6692(struct IsdnCardState *cs)
 	}
 }
 
-static void __init initW6692(struct IsdnCardState *cs, int part)
+static void initW6692(struct IsdnCardState *cs, int part)
 {
 	if (part & 1) {
 		cs->setstack_d = setstack_W6692;
@@ -992,9 +992,9 @@ w6692_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 
 static int id_idx ;
 
-static struct pci_dev *dev_w6692 __initdata = NULL;
+static struct pci_dev *dev_w6692 __devinitdata = NULL;
 
-int __init 
+int __devinit
 setup_w6692(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index 9f6c637..c3d79ee 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -1059,7 +1059,7 @@ isdn_info_update(void)
 static ssize_t
 isdn_read(struct file *file, char __user *buf, size_t count, loff_t * off)
 {
-	uint minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	uint minor = iminor(file->f_dentry->d_inode);
 	int len = 0;
 	int drvidx;
 	int chidx;
@@ -1163,7 +1163,7 @@ isdn_read(struct file *file, char __user *buf, size_t count, loff_t * off)
 static ssize_t
 isdn_write(struct file *file, const char __user *buf, size_t count, loff_t * off)
 {
-	uint minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	uint minor = iminor(file->f_dentry->d_inode);
 	int drvidx;
 	int chidx;
 	int retval;
@@ -1225,7 +1225,7 @@ static unsigned int
 isdn_poll(struct file *file, poll_table * wait)
 {
 	unsigned int mask = 0;
-	unsigned int minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	unsigned int minor = iminor(file->f_dentry->d_inode);
 	int drvidx = isdn_minor2drv(minor - ISDN_MINOR_CTRL);
 
 	lock_kernel();
@@ -1266,7 +1266,7 @@ isdn_poll(struct file *file, poll_table * wait)
 static int
 isdn_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg)
 {
-	uint minor = MINOR(inode->i_rdev);
+	uint minor = iminor(inode);
 	isdn_ctrl c;
 	int drvidx;
 	int chidx;
@@ -1717,7 +1717,7 @@ isdn_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg)
 static int
 isdn_open(struct inode *ino, struct file *filep)
 {
-	uint minor = MINOR(ino->i_rdev);
+	uint minor = iminor(ino);
 	int drvidx;
 	int chidx;
 	int retval = -ENODEV;
@@ -1779,7 +1779,7 @@ isdn_open(struct inode *ino, struct file *filep)
 static int
 isdn_close(struct inode *ino, struct file *filep)
 {
-	uint minor = MINOR(ino->i_rdev);
+	uint minor = iminor(ino);
 
 	lock_kernel();
 	if (minor == ISDN_MINOR_STATUS) {
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index 29e7667..119412d 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -667,7 +667,7 @@ isdn_ppp_poll(struct file *file, poll_table * wait)
 
 	if (is->debug & 0x2)
 		printk(KERN_DEBUG "isdn_ppp_poll: minor: %d\n",
-				MINOR(file->f_dentry->d_inode->i_rdev));
+				iminor(file->f_dentry->d_inode));
 
 	/* just registers wait_queue hook. This doesn't really wait. */
 	poll_wait(file, &is->wq, wait);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9650998..9c39b98 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -69,6 +69,13 @@ config LEDS_AMS_DELTA
 	help
 	  This option enables support for the LEDs on Amstrad Delta (E3).
 
+config LEDS_NET48XX
+	tristate "LED Support for Soekris net48xx series Error LED"
+	depends on LEDS_CLASS && SCx200_GPIO
+	help
+	  This option enables support for the Soekris net4801 and net4826 error
+	  LED.
+
 comment "LED Triggers"
 
 config LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 88d3b6e..6aa2aed 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_LEDS_IXP4XX)		+= leds-ixp4xx-gpio.o
 obj-$(CONFIG_LEDS_TOSA)			+= leds-tosa.o
 obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c24xx.o
 obj-$(CONFIG_LEDS_AMS_DELTA)		+= leds-ams-delta.o
+obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
 
 # LED Triggers
 obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/drivers/leds/leds-net48xx.c b/drivers/leds/leds-net48xx.c
new file mode 100644
index 0000000..713c4a8
--- /dev/null
+++ b/drivers/leds/leds-net48xx.c
@@ -0,0 +1,116 @@
+/*
+ * LEDs driver for Soekris net48xx
+ *
+ * Copyright (C) 2006 Chris Boot <bootc@bootc.net>
+ *
+ * Based on leds-ams-delta.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#include <linux/scx200_gpio.h>
+
+#define DRVNAME "net48xx-led"
+#define NET48XX_ERROR_LED_GPIO	20
+
+static struct platform_device *pdev;
+
+static void net48xx_error_led_set(struct led_classdev *led_cdev,
+		enum led_brightness value)
+{
+	if (value)
+		scx200_gpio_set_high(NET48XX_ERROR_LED_GPIO);
+	else
+		scx200_gpio_set_low(NET48XX_ERROR_LED_GPIO);
+}
+
+static struct led_classdev net48xx_error_led = {
+	.name		= "net48xx:error",
+	.brightness_set	= net48xx_error_led_set,
+};
+
+#ifdef CONFIG_PM
+static int net48xx_led_suspend(struct platform_device *dev,
+		pm_message_t state)
+{
+	led_classdev_suspend(&net48xx_error_led);
+	return 0;
+}
+
+static int net48xx_led_resume(struct platform_device *dev)
+{
+	led_classdev_resume(&net48xx_error_led);
+	return 0;
+}
+#else
+#define net48xx_led_suspend NULL
+#define net48xx_led_resume NULL
+#endif
+
+static int net48xx_led_probe(struct platform_device *pdev)
+{
+	return led_classdev_register(&pdev->dev, &net48xx_error_led);
+}
+
+static int net48xx_led_remove(struct platform_device *pdev)
+{
+	led_classdev_unregister(&net48xx_error_led);
+	return 0;
+}
+
+static struct platform_driver net48xx_led_driver = {
+	.probe		= net48xx_led_probe,
+	.remove		= net48xx_led_remove,
+	.suspend	= net48xx_led_suspend,
+	.resume		= net48xx_led_resume,
+	.driver		= {
+		.name		= DRVNAME,
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init net48xx_led_init(void)
+{
+	int ret;
+
+	if (!scx200_gpio_present()) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ret = platform_driver_register(&net48xx_led_driver);
+	if (ret < 0)
+		goto out;
+
+	pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		ret = PTR_ERR(pdev);
+		platform_driver_unregister(&net48xx_led_driver);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+static void __exit net48xx_led_exit(void)
+{
+	platform_device_unregister(pdev);
+	platform_driver_unregister(&net48xx_led_driver);
+}
+
+module_init(net48xx_led_init);
+module_exit(net48xx_led_exit);
+
+MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
+MODULE_DESCRIPTION("Soekris net48xx LED driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 54f3f6b..f5fe7fb 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -113,7 +113,10 @@ config PMAC_MEDIABAY
 
 config PMAC_BACKLIGHT
 	bool "Backlight control for LCD screens"
-	depends on ADB_PMU && (BROKEN || !PPC64)
+	depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
+	select FB_BACKLIGHT
+	select BACKLIGHT_CLASS_DEVICE
+	select BACKLIGHT_LCD_SUPPORT
 	help
 	  Say Y here to enable Macintosh specific extensions of the generic
 	  backlight code. With this enabled, the brightness keys on older
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 80c0c66..82657bc 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -330,7 +330,7 @@ static void macio_create_fixup_irq(struct macio_dev *dev, int index,
 {
 	unsigned int irq;
 
-	irq = irq_create_mapping(NULL, line, 0);
+	irq = irq_create_mapping(NULL, line);
 	if (irq != NO_IRQ) {
 		dev->interrupt[index].start = irq;
 		dev->interrupt[index].flags = IORESOURCE_IRQ;
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index f139a74..00ef468 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -75,9 +75,11 @@ struct smu_device {
 	struct of_device	*of_dev;
 	int			doorbell;	/* doorbell gpio */
 	u32 __iomem		*db_buf;	/* doorbell buffer */
-	int			db_irq;
+	struct device_node	*db_node;
+	unsigned int		db_irq;
 	int			msg;
-	int			msg_irq;
+	struct device_node	*msg_node;
+	unsigned int		msg_irq;
 	struct smu_cmd_buf	*cmd_buf;	/* command buffer virtual */
 	u32			cmd_buf_abs;	/* command buffer absolute */
 	struct list_head	cmd_list;
@@ -93,6 +95,7 @@ struct smu_device {
  */
 static struct smu_device	*smu;
 static DEFINE_MUTEX(smu_part_access);
+static int smu_irq_inited;
 
 static void smu_i2c_retry(unsigned long data);
 
@@ -257,6 +260,10 @@ int smu_queue_cmd(struct smu_cmd *cmd)
 		smu_start_cmd();
 	spin_unlock_irqrestore(&smu->lock, flags);
 
+	/* Workaround for early calls when irq isn't available */
+	if (!smu_irq_inited || smu->db_irq == NO_IRQ)
+		smu_spinwait_cmd(cmd);
+
 	return 0;
 }
 EXPORT_SYMBOL(smu_queue_cmd);
@@ -478,14 +485,15 @@ int __init smu_init (void)
 	smu->cmd_buf_abs = (u32)smu_cmdbuf_abs;
 	smu->cmd_buf = (struct smu_cmd_buf *)abs_to_virt(smu_cmdbuf_abs);
 
-	np = of_find_node_by_name(NULL, "smu-doorbell");
-	if (np == NULL) {
+	smu->db_node = of_find_node_by_name(NULL, "smu-doorbell");
+	if (smu->db_node == NULL) {
 		printk(KERN_ERR "SMU: Can't find doorbell GPIO !\n");
 		goto fail;
 	}
-	data = (u32 *)get_property(np, "reg", NULL);
+	data = (u32 *)get_property(smu->db_node, "reg", NULL);
 	if (data == NULL) {
-		of_node_put(np);
+		of_node_put(smu->db_node);
+		smu->db_node = NULL;
 		printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n");
 		goto fail;
 	}
@@ -497,25 +505,21 @@ int __init smu_init (void)
 	smu->doorbell = *data;
 	if (smu->doorbell < 0x50)
 		smu->doorbell += 0x50;
-	smu->db_irq = irq_of_parse_and_map(np, 0);
-
-	of_node_put(np);
 
 	/* Now look for the smu-interrupt GPIO */
 	do {
-		np = of_find_node_by_name(NULL, "smu-interrupt");
-		if (np == NULL)
+		smu->msg_node = of_find_node_by_name(NULL, "smu-interrupt");
+		if (smu->msg_node == NULL)
 			break;
-		data = (u32 *)get_property(np, "reg", NULL);
+		data = (u32 *)get_property(smu->msg_node, "reg", NULL);
 		if (data == NULL) {
-			of_node_put(np);
+			of_node_put(smu->msg_node);
+			smu->msg_node = NULL;
 			break;
 		}
 		smu->msg = *data;
 		if (smu->msg < 0x50)
 			smu->msg += 0x50;
-		smu->msg_irq = irq_of_parse_and_map(np, 0);
-		of_node_put(np);
 	} while(0);
 
 	/* Doorbell buffer is currently hard-coded, I didn't find a proper
@@ -547,6 +551,19 @@ static int smu_late_init(void)
 	smu->i2c_timer.function = smu_i2c_retry;
 	smu->i2c_timer.data = (unsigned long)smu;
 
+	if (smu->db_node) {
+		smu->db_irq = irq_of_parse_and_map(smu->db_node, 0);
+		if (smu->db_irq == NO_IRQ)
+			printk(KERN_ERR "smu: failed to map irq for node %s\n",
+			       smu->db_node->full_name);
+	}
+	if (smu->msg_node) {
+		smu->msg_irq = irq_of_parse_and_map(smu->msg_node, 0);
+		if (smu->msg_irq == NO_IRQ)
+			printk(KERN_ERR "smu: failed to map irq for node %s\n",
+			       smu->msg_node->full_name);
+	}
+
 	/*
 	 * Try to request the interrupts
 	 */
@@ -571,6 +588,7 @@ static int smu_late_init(void)
 		}
 	}
 
+	smu_irq_inited = 1;
 	return 0;
 }
 /* This has to be before arch_initcall as the low i2c stuff relies on the
@@ -742,6 +760,11 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc)
 	if (fail && --cmd->retries > 0) {
 		DPRINTK("SMU: i2c failure, starting timer...\n");
 		BUG_ON(cmd != smu->cmd_i2c_cur);
+		if (!smu_irq_inited) {
+			mdelay(5);
+			smu_i2c_retry(0);
+			return;
+		}
 		mod_timer(&smu->i2c_timer, jiffies + msecs_to_jiffies(5));
 		return;
 	}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index e4e1613..b6d1602 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -110,7 +110,7 @@ static ctl_table raid_table[] = {
 		.procname	= "speed_limit_min",
 		.data		= &sysctl_speed_limit_min,
 		.maxlen		= sizeof(int),
-		.mode		= 0644,
+		.mode		= S_IRUGO|S_IWUSR,
 		.proc_handler	= &proc_dointvec,
 	},
 	{
@@ -118,7 +118,7 @@ static ctl_table raid_table[] = {
 		.procname	= "speed_limit_max",
 		.data		= &sysctl_speed_limit_max,
 		.maxlen		= sizeof(int),
-		.mode		= 0644,
+		.mode		= S_IRUGO|S_IWUSR,
 		.proc_handler	= &proc_dointvec,
 	},
 	{ .ctl_name = 0 }
@@ -129,7 +129,7 @@ static ctl_table raid_dir_table[] = {
 		.ctl_name	= DEV_RAID,
 		.procname	= "raid",
 		.maxlen		= 0,
-		.mode		= 0555,
+		.mode		= S_IRUGO|S_IXUGO,
 		.child		= raid_table,
 	},
 	{ .ctl_name = 0 }
@@ -1062,6 +1062,11 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
 	if (rdev->sb_size & bmask)
 		rdev-> sb_size = (rdev->sb_size | bmask)+1;
 
+	if (sb->level == cpu_to_le32(LEVEL_MULTIPATH))
+		rdev->desc_nr = -1;
+	else
+		rdev->desc_nr = le32_to_cpu(sb->dev_number);
+
 	if (refdev == 0)
 		ret = 1;
 	else {
@@ -1171,7 +1176,6 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 	}
 	if (mddev->level != LEVEL_MULTIPATH) {
 		int role;
-		rdev->desc_nr = le32_to_cpu(sb->dev_number);
 		role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
 		switch(role) {
 		case 0xffff: /* spare */
@@ -1779,8 +1783,8 @@ state_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 	}
 	return err ? err : len;
 }
-static struct rdev_sysfs_entry
-rdev_state = __ATTR(state, 0644, state_show, state_store);
+static struct rdev_sysfs_entry rdev_state =
+__ATTR(state, S_IRUGO|S_IWUSR, state_show, state_store);
 
 static ssize_t
 super_show(mdk_rdev_t *rdev, char *page)
@@ -1811,7 +1815,7 @@ errors_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 	return -EINVAL;
 }
 static struct rdev_sysfs_entry rdev_errors =
-__ATTR(errors, 0644, errors_show, errors_store);
+__ATTR(errors, S_IRUGO|S_IWUSR, errors_show, errors_store);
 
 static ssize_t
 slot_show(mdk_rdev_t *rdev, char *page)
@@ -1845,7 +1849,7 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 
 
 static struct rdev_sysfs_entry rdev_slot =
-__ATTR(slot, 0644, slot_show, slot_store);
+__ATTR(slot, S_IRUGO|S_IWUSR, slot_show, slot_store);
 
 static ssize_t
 offset_show(mdk_rdev_t *rdev, char *page)
@@ -1867,7 +1871,7 @@ offset_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 }
 
 static struct rdev_sysfs_entry rdev_offset =
-__ATTR(offset, 0644, offset_show, offset_store);
+__ATTR(offset, S_IRUGO|S_IWUSR, offset_show, offset_store);
 
 static ssize_t
 rdev_size_show(mdk_rdev_t *rdev, char *page)
@@ -1891,7 +1895,7 @@ rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 }
 
 static struct rdev_sysfs_entry rdev_size =
-__ATTR(size, 0644, rdev_size_show, rdev_size_store);
+__ATTR(size, S_IRUGO|S_IWUSR, rdev_size_show, rdev_size_store);
 
 static struct attribute *rdev_default_attrs[] = {
 	&rdev_state.attr,
@@ -1922,6 +1926,8 @@ rdev_attr_store(struct kobject *kobj, struct attribute *attr,
 
 	if (!entry->store)
 		return -EIO;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
 	return entry->store(rdev, page, length);
 }
 
@@ -2128,7 +2134,7 @@ safe_delay_store(mddev_t *mddev, const char *cbuf, size_t len)
 	return len;
 }
 static struct md_sysfs_entry md_safe_delay =
-__ATTR(safe_mode_delay, 0644,safe_delay_show, safe_delay_store);
+__ATTR(safe_mode_delay, S_IRUGO|S_IWUSR,safe_delay_show, safe_delay_store);
 
 static ssize_t
 level_show(mddev_t *mddev, char *page)
@@ -2163,7 +2169,7 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
 }
 
 static struct md_sysfs_entry md_level =
-__ATTR(level, 0644, level_show, level_store);
+__ATTR(level, S_IRUGO|S_IWUSR, level_show, level_store);
 
 
 static ssize_t
@@ -2188,7 +2194,7 @@ layout_store(mddev_t *mddev, const char *buf, size_t len)
 	return len;
 }
 static struct md_sysfs_entry md_layout =
-__ATTR(layout, 0655, layout_show, layout_store);
+__ATTR(layout, S_IRUGO|S_IWUSR, layout_show, layout_store);
 
 
 static ssize_t
@@ -2219,7 +2225,7 @@ raid_disks_store(mddev_t *mddev, const char *buf, size_t len)
 	return rv ? rv : len;
 }
 static struct md_sysfs_entry md_raid_disks =
-__ATTR(raid_disks, 0644, raid_disks_show, raid_disks_store);
+__ATTR(raid_disks, S_IRUGO|S_IWUSR, raid_disks_show, raid_disks_store);
 
 static ssize_t
 chunk_size_show(mddev_t *mddev, char *page)
@@ -2243,7 +2249,7 @@ chunk_size_store(mddev_t *mddev, const char *buf, size_t len)
 	return len;
 }
 static struct md_sysfs_entry md_chunk_size =
-__ATTR(chunk_size, 0644, chunk_size_show, chunk_size_store);
+__ATTR(chunk_size, S_IRUGO|S_IWUSR, chunk_size_show, chunk_size_store);
 
 static ssize_t
 resync_start_show(mddev_t *mddev, char *page)
@@ -2267,7 +2273,7 @@ resync_start_store(mddev_t *mddev, const char *buf, size_t len)
 	return len;
 }
 static struct md_sysfs_entry md_resync_start =
-__ATTR(resync_start, 0644, resync_start_show, resync_start_store);
+__ATTR(resync_start, S_IRUGO|S_IWUSR, resync_start_show, resync_start_store);
 
 /*
  * The array state can be:
@@ -2437,7 +2443,8 @@ array_state_store(mddev_t *mddev, const char *buf, size_t len)
 	else
 		return len;
 }
-static struct md_sysfs_entry md_array_state = __ATTR(array_state, 0644, array_state_show, array_state_store);
+static struct md_sysfs_entry md_array_state =
+__ATTR(array_state, S_IRUGO|S_IWUSR, array_state_show, array_state_store);
 
 static ssize_t
 null_show(mddev_t *mddev, char *page)
@@ -2497,7 +2504,7 @@ new_dev_store(mddev_t *mddev, const char *buf, size_t len)
 }
 
 static struct md_sysfs_entry md_new_device =
-__ATTR(new_dev, 0200, null_show, new_dev_store);
+__ATTR(new_dev, S_IWUSR, null_show, new_dev_store);
 
 static ssize_t
 size_show(mddev_t *mddev, char *page)
@@ -2535,7 +2542,7 @@ size_store(mddev_t *mddev, const char *buf, size_t len)
 }
 
 static struct md_sysfs_entry md_size =
-__ATTR(component_size, 0644, size_show, size_store);
+__ATTR(component_size, S_IRUGO|S_IWUSR, size_show, size_store);
 
 
 /* Metdata version.
@@ -2583,7 +2590,7 @@ metadata_store(mddev_t *mddev, const char *buf, size_t len)
 }
 
 static struct md_sysfs_entry md_metadata =
-__ATTR(metadata_version, 0644, metadata_show, metadata_store);
+__ATTR(metadata_version, S_IRUGO|S_IWUSR, metadata_show, metadata_store);
 
 static ssize_t
 action_show(mddev_t *mddev, char *page)
@@ -2651,12 +2658,11 @@ mismatch_cnt_show(mddev_t *mddev, char *page)
 		       (unsigned long long) mddev->resync_mismatches);
 }
 
-static struct md_sysfs_entry
-md_scan_mode = __ATTR(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
+static struct md_sysfs_entry md_scan_mode =
+__ATTR(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
 
 
-static struct md_sysfs_entry
-md_mismatches = __ATTR_RO(mismatch_cnt);
+static struct md_sysfs_entry md_mismatches = __ATTR_RO(mismatch_cnt);
 
 static ssize_t
 sync_min_show(mddev_t *mddev, char *page)
@@ -2715,15 +2721,14 @@ static ssize_t
 sync_speed_show(mddev_t *mddev, char *page)
 {
 	unsigned long resync, dt, db;
-	resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
+	resync = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active));
 	dt = ((jiffies - mddev->resync_mark) / HZ);
 	if (!dt) dt++;
 	db = resync - (mddev->resync_mark_cnt);
 	return sprintf(page, "%ld\n", db/dt/2); /* K/sec */
 }
 
-static struct md_sysfs_entry
-md_sync_speed = __ATTR_RO(sync_speed);
+static struct md_sysfs_entry md_sync_speed = __ATTR_RO(sync_speed);
 
 static ssize_t
 sync_completed_show(mddev_t *mddev, char *page)
@@ -2739,8 +2744,7 @@ sync_completed_show(mddev_t *mddev, char *page)
 	return sprintf(page, "%lu / %lu\n", resync, max_blocks);
 }
 
-static struct md_sysfs_entry
-md_sync_completed = __ATTR_RO(sync_completed);
+static struct md_sysfs_entry md_sync_completed = __ATTR_RO(sync_completed);
 
 static ssize_t
 suspend_lo_show(mddev_t *mddev, char *page)
@@ -2857,6 +2861,8 @@ md_attr_store(struct kobject *kobj, struct attribute *attr,
 
 	if (!entry->store)
 		return -EIO;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
 	rv = mddev_lock(mddev);
 	if (!rv) {
 		rv = entry->store(mddev, page, length);
@@ -3091,7 +3097,6 @@ static int do_md_run(mddev_t * mddev)
 		}
 	
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
-	md_wakeup_thread(mddev->thread);
 	
 	if (mddev->sb_dirty)
 		md_update_sb(mddev);
@@ -3112,7 +3117,7 @@ static int do_md_run(mddev_t * mddev)
 	 * start recovery here.  If we leave it to md_check_recovery,
 	 * it will remove the drives and not do the right thing
 	 */
-	if (mddev->degraded) {
+	if (mddev->degraded && !mddev->sync_thread) {
 		struct list_head *rtmp;
 		int spares = 0;
 		ITERATE_RDEV(mddev,rdev,rtmp)
@@ -3133,10 +3138,11 @@ static int do_md_run(mddev_t * mddev)
 				       mdname(mddev));
 				/* leave the spares where they are, it shouldn't hurt */
 				mddev->recovery = 0;
-			} else
-				md_wakeup_thread(mddev->sync_thread);
+			}
 		}
 	}
+	md_wakeup_thread(mddev->thread);
+	md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
 
 	mddev->changed = 1;
 	md_new_event(mddev);
@@ -4586,6 +4592,8 @@ void md_error(mddev_t *mddev, mdk_rdev_t *rdev)
 		__builtin_return_address(0),__builtin_return_address(1),
 		__builtin_return_address(2),__builtin_return_address(3));
 */
+	if (!mddev->pers)
+		return;
 	if (!mddev->pers->error_handler)
 		return;
 	mddev->pers->error_handler(mddev,rdev);
@@ -4683,12 +4691,13 @@ static void status_resync(struct seq_file *seq, mddev_t * mddev)
 	 */
 	dt = ((jiffies - mddev->resync_mark) / HZ);
 	if (!dt) dt++;
-	db = resync - (mddev->resync_mark_cnt/2);
-	rt = (dt * ((unsigned long)(max_blocks-resync) / (db/100+1)))/100;
+	db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active))
+		- mddev->resync_mark_cnt;
+	rt = (dt * ((unsigned long)(max_blocks-resync) / (db/2/100+1)))/100;
 
 	seq_printf(seq, " finish=%lu.%lumin", rt / 60, (rt % 60)/6);
 
-	seq_printf(seq, " speed=%ldK/sec", db/dt);
+	seq_printf(seq, " speed=%ldK/sec", db/2/dt);
 }
 
 static void *md_seq_start(struct seq_file *seq, loff_t *pos)
@@ -5199,6 +5208,7 @@ void md_do_sync(mddev_t *mddev)
 
 		j += sectors;
 		if (j>1) mddev->curr_resync = j;
+		mddev->curr_mark_cnt = io_sectors;
 		if (last_check == 0)
 			/* this is the earliers that rebuilt will be
 			 * visible in /proc/mdstat
@@ -5645,8 +5655,8 @@ static int set_ro(const char *val, struct kernel_param *kp)
 	return -EINVAL;
 }
 
-module_param_call(start_ro, set_ro, get_ro, NULL, 0600);
-module_param(start_dirty_degraded, int, 0644);
+module_param_call(start_ro, set_ro, get_ro, NULL, S_IRUSR|S_IWUSR);
+module_param(start_dirty_degraded, int, S_IRUGO|S_IWUSR);
 
 
 EXPORT_SYMBOL(register_md_personality);
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index cead918..1efe22a 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1145,7 +1145,7 @@ static int end_sync_write(struct bio *bio, unsigned int bytes_done, int error)
 		long sectors_to_go = r1_bio->sectors;
 		/* make sure these bits doesn't get cleared. */
 		do {
-			bitmap_end_sync(mddev->bitmap, r1_bio->sector,
+			bitmap_end_sync(mddev->bitmap, s,
 					&sync_blocks, 1);
 			s += sync_blocks;
 			sectors_to_go -= sync_blocks;
@@ -1509,6 +1509,9 @@ static void raid1d(mddev_t *mddev)
 									 s<<9, conf->tmppage, READ) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							else
+								printk(KERN_INFO "raid1:%s: read error corrected (%d sectors at %llu on %s)\n",
+								       mdname(mddev), s, (unsigned long long)(sect + rdev->data_offset), bdevname(rdev->bdev, b));
 						}
 					}
 				} else {
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 7f63628..016ddb8 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1492,6 +1492,10 @@ static void raid10d(mddev_t *mddev)
 									 s<<9, conf->tmppage, READ) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							else
+								printk(KERN_INFO "raid10:%s: read error corrected (%d sectors at %llu on %s)\n",
+								       mdname(mddev), s, (unsigned long long)(sect+rdev->data_offset), bdevname(rdev->bdev, b));
+
 							rdev_dec_pending(rdev, mddev);
 							rcu_read_lock();
 						}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 7433871..4500660 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -18,6 +18,30 @@
  * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+/*
+ * BITMAP UNPLUGGING:
+ *
+ * The sequencing for updating the bitmap reliably is a little
+ * subtle (and I got it wrong the first time) so it deserves some
+ * explanation.
+ *
+ * We group bitmap updates into batches.  Each batch has a number.
+ * We may write out several batches at once, but that isn't very important.
+ * conf->bm_write is the number of the last batch successfully written.
+ * conf->bm_flush is the number of the last batch that was closed to
+ *    new additions.
+ * When we discover that we will need to write to any block in a stripe
+ * (in add_stripe_bio) we update the in-memory bitmap and record in sh->bm_seq
+ * the number of the batch it will be in. This is bm_flush+1.
+ * When we are ready to do a write, if that batch hasn't been written yet,
+ *   we plug the array and queue the stripe for later.
+ * When an unplug happens, we increment bm_flush, thus closing the current
+ *   batch.
+ * When we notice that bm_flush > bm_write, we write out all pending updates
+ * to the bitmap, and advance bm_write to where bm_flush was.
+ * This may occasionally write a bit out twice, but is sure never to
+ * miss any bits.
+ */
 
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -88,12 +112,14 @@ static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh)
 		BUG_ON(!list_empty(&sh->lru));
 		BUG_ON(atomic_read(&conf->active_stripes)==0);
 		if (test_bit(STRIPE_HANDLE, &sh->state)) {
-			if (test_bit(STRIPE_DELAYED, &sh->state))
+			if (test_bit(STRIPE_DELAYED, &sh->state)) {
 				list_add_tail(&sh->lru, &conf->delayed_list);
-			else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
-				 conf->seq_write == sh->bm_seq)
+				blk_plug_device(conf->mddev->queue);
+			} else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
+				   sh->bm_seq - conf->seq_write > 0) {
 				list_add_tail(&sh->lru, &conf->bitmap_list);
-			else {
+				blk_plug_device(conf->mddev->queue);
+			} else {
 				clear_bit(STRIPE_BIT_DELAY, &sh->state);
 				list_add_tail(&sh->lru, &conf->handle_list);
 			}
@@ -270,7 +296,7 @@ static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector
 						     < (conf->max_nr_stripes *3/4)
 						     || !conf->inactive_blocked),
 						    conf->device_lock,
-						    unplug_slaves(conf->mddev)
+						    raid5_unplug_device(conf->mddev->queue)
 					);
 				conf->inactive_blocked = 0;
 			} else
@@ -281,7 +307,8 @@ static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector
 			} else {
 				if (!test_bit(STRIPE_HANDLE, &sh->state))
 					atomic_inc(&conf->active_stripes);
-				if (list_empty(&sh->lru))
+				if (list_empty(&sh->lru) &&
+				    !test_bit(STRIPE_EXPANDING, &sh->state))
 					BUG();
 				list_del_init(&sh->lru);
 			}
@@ -496,6 +523,8 @@ static int raid5_end_read_request(struct bio * bi, unsigned int bytes_done,
 	raid5_conf_t *conf = sh->raid_conf;
 	int disks = sh->disks, i;
 	int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags);
+	char b[BDEVNAME_SIZE];
+	mdk_rdev_t *rdev;
 
 	if (bi->bi_size)
 		return 1;
@@ -543,25 +572,39 @@ static int raid5_end_read_request(struct bio * bi, unsigned int bytes_done,
 		set_bit(R5_UPTODATE, &sh->dev[i].flags);
 #endif
 		if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
-			printk(KERN_INFO "raid5: read error corrected!!\n");
+			rdev = conf->disks[i].rdev;
+			printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
+			       mdname(conf->mddev), STRIPE_SECTORS,
+			       (unsigned long long)sh->sector + rdev->data_offset,
+			       bdevname(rdev->bdev, b));
 			clear_bit(R5_ReadError, &sh->dev[i].flags);
 			clear_bit(R5_ReWrite, &sh->dev[i].flags);
 		}
 		if (atomic_read(&conf->disks[i].rdev->read_errors))
 			atomic_set(&conf->disks[i].rdev->read_errors, 0);
 	} else {
+		const char *bdn = bdevname(conf->disks[i].rdev->bdev, b);
 		int retry = 0;
+		rdev = conf->disks[i].rdev;
+
 		clear_bit(R5_UPTODATE, &sh->dev[i].flags);
-		atomic_inc(&conf->disks[i].rdev->read_errors);
+		atomic_inc(&rdev->read_errors);
 		if (conf->mddev->degraded)
-			printk(KERN_WARNING "raid5: read error not correctable.\n");
+			printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
+			       mdname(conf->mddev),
+			       (unsigned long long)sh->sector + rdev->data_offset,
+			       bdn);
 		else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
 			/* Oh, no!!! */
-			printk(KERN_WARNING "raid5: read error NOT corrected!!\n");
-		else if (atomic_read(&conf->disks[i].rdev->read_errors)
+			printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
+			       mdname(conf->mddev),
+			       (unsigned long long)sh->sector + rdev->data_offset,
+			       bdn);
+		else if (atomic_read(&rdev->read_errors)
 			 > conf->max_nr_stripes)
 			printk(KERN_WARNING
-			       "raid5: Too many read errors, failing device.\n");
+			       "raid5:%s: Too many read errors, failing device %s.\n",
+			       mdname(conf->mddev), bdn);
 		else
 			retry = 1;
 		if (retry)
@@ -569,7 +612,7 @@ static int raid5_end_read_request(struct bio * bi, unsigned int bytes_done,
 		else {
 			clear_bit(R5_ReadError, &sh->dev[i].flags);
 			clear_bit(R5_ReWrite, &sh->dev[i].flags);
-			md_error(conf->mddev, conf->disks[i].rdev);
+			md_error(conf->mddev, rdev);
 		}
 	}
 	rdev_dec_pending(conf->disks[i].rdev, conf->mddev);
@@ -1270,9 +1313,9 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
 		(unsigned long long)sh->sector, dd_idx);
 
 	if (conf->mddev->bitmap && firstwrite) {
-		sh->bm_seq = conf->seq_write;
 		bitmap_startwrite(conf->mddev->bitmap, sh->sector,
 				  STRIPE_SECTORS, 0);
+		sh->bm_seq = conf->seq_flush+1;
 		set_bit(STRIPE_BIT_DELAY, &sh->state);
 	}
 
@@ -2554,13 +2597,6 @@ static int raid5_issue_flush(request_queue_t *q, struct gendisk *disk,
 	return ret;
 }
 
-static inline void raid5_plug_device(raid5_conf_t *conf)
-{
-	spin_lock_irq(&conf->device_lock);
-	blk_plug_device(conf->mddev->queue);
-	spin_unlock_irq(&conf->device_lock);
-}
-
 static int make_request(request_queue_t *q, struct bio * bi)
 {
 	mddev_t *mddev = q->queuedata;
@@ -2670,7 +2706,6 @@ static int make_request(request_queue_t *q, struct bio * bi)
 				goto retry;
 			}
 			finish_wait(&conf->wait_for_overlap, &w);
-			raid5_plug_device(conf);
 			handle_stripe(sh, NULL);
 			release_stripe(sh);
 		} else {
@@ -2923,7 +2958,7 @@ static void raid5d (mddev_t *mddev)
 	while (1) {
 		struct list_head *first;
 
-		if (conf->seq_flush - conf->seq_write > 0) {
+		if (conf->seq_flush != conf->seq_write) {
 			int seq = conf->seq_flush;
 			spin_unlock_irq(&conf->device_lock);
 			bitmap_unplug(mddev->bitmap);
@@ -3246,9 +3281,6 @@ static int run(mddev_t *mddev)
 		set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
 		mddev->sync_thread = md_register_thread(md_do_sync, mddev,
 							"%s_reshape");
-		/* FIXME if md_register_thread fails?? */
-		md_wakeup_thread(mddev->sync_thread);
-
 	}
 
 	/* read-ahead size must cover two whole stripes, which is
diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
index 55671cb..87c286e 100644
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -896,9 +896,9 @@ static int nxt2002_init(struct dvb_frontend* fe)
 	}
 
 	ret = nxt2002_load_firmware(fe, fw);
+	release_firmware(fw);
 	if (ret) {
 		printk("nxt2002: Writing firmware to device failed\n");
-		release_firmware(fw);
 		return ret;
 	}
 	printk("nxt2002: Firmware upload complete\n");
@@ -960,9 +960,9 @@ static int nxt2004_init(struct dvb_frontend* fe)
 	}
 
 	ret = nxt2004_load_firmware(fe, fw);
+	release_firmware(fw);
 	if (ret) {
 		printk("nxt2004: Writing firmware to device failed\n");
-		release_firmware(fw);
 		return ret;
 	}
 	printk("nxt2004: Firmware upload complete\n");
diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c
index 26bed61..2bf124b 100644
--- a/drivers/media/dvb/frontends/or51211.c
+++ b/drivers/media/dvb/frontends/or51211.c
@@ -437,10 +437,10 @@ static int or51211_init(struct dvb_frontend* fe)
 		}
 
 		ret = or51211_load_firmware(fe, fw);
+		release_firmware(fw);
 		if (ret) {
 			printk(KERN_WARNING "or51211: Writing firmware to "
 			       "device failed!\n");
-			release_firmware(fw);
 			return ret;
 		}
 		printk(KERN_INFO "or51211: Firmware upload complete.\n");
diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
index 44ec5b9..d98fd5c 100644
--- a/drivers/media/dvb/frontends/sp8870.c
+++ b/drivers/media/dvb/frontends/sp8870.c
@@ -318,7 +318,6 @@ static int sp8870_init (struct dvb_frontend* fe)
 	printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE);
 	if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) {
 		printk("sp8870: no firmware upload (timeout or file not found?)\n");
-		release_firmware(fw);
 		return -EIO;
 	}
 
@@ -327,6 +326,7 @@ static int sp8870_init (struct dvb_frontend* fe)
 		release_firmware(fw);
 		return -EIO;
 	}
+	release_firmware(fw);
 	printk("sp8870: firmware upload complete\n");
 
 	/* enable TS output and interface pins */
diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
index b0a2b02..5c2f8f4 100644
--- a/drivers/media/dvb/frontends/sp887x.c
+++ b/drivers/media/dvb/frontends/sp887x.c
@@ -520,9 +520,9 @@ static int sp887x_init(struct dvb_frontend* fe)
 		}
 
 		ret = sp887x_initial_setup(fe, fw);
+		release_firmware(fw);
 		if (ret) {
 			printk("sp887x: writing firmware to device failed\n");
-			release_firmware(fw);
 			return ret;
 		}
 		printk("sp887x: firmware upload complete\n");
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 349632b..b60177f 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -453,11 +453,13 @@ static int blackbird_load_firmware(struct cx8802_dev *dev)
 	if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) {
 		dprintk(0, "ERROR: Firmware size mismatch (have %zd, expected %d)\n",
 			firmware->size, BLACKBIRD_FIRM_IMAGE_SIZE);
+		release_firmware(firmware);
 		return -1;
 	}
 
 	if (0 != memcmp(firmware->data, magic, 8)) {
 		dprintk(0, "ERROR: Firmware magic mismatch, wrong file?\n");
+		release_firmware(firmware);
 		return -1;
 	}
 
@@ -478,6 +480,7 @@ static int blackbird_load_firmware(struct cx8802_dev *dev)
 	}
 	if (checksum) {
 		dprintk(0, "ERROR: Firmware load failed (checksum mismatch).\n");
+		release_firmware(firmware);
 		return -1;
 	}
 	release_firmware(firmware);
diff --git a/drivers/message/i2o/core.h b/drivers/message/i2o/core.h
index 184974c..dc388a3 100644
--- a/drivers/message/i2o/core.h
+++ b/drivers/message/i2o/core.h
@@ -38,6 +38,9 @@ extern struct device_attribute i2o_device_attrs[];
 extern void i2o_device_remove(struct i2o_device *);
 extern int i2o_device_parse_lct(struct i2o_controller *);
 
+int i2o_parm_issue(struct i2o_device *i2o_dev, int cmd, void *oplist,
+		   int oplen, void *reslist, int reslen);
+
 /* IOP */
 extern struct i2o_controller *i2o_iop_alloc(void);
 
diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c
index 89daf67..7d23e08 100644
--- a/drivers/message/i2o/i2o_config.c
+++ b/drivers/message/i2o/i2o_config.c
@@ -36,9 +36,9 @@
 
 #include <asm/uaccess.h>
 
-#define SG_TABLESIZE		30
+#include "core.h"
 
-extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int);
+#define SG_TABLESIZE		30
 
 static int i2o_cfg_ioctl(struct inode *, struct file *, unsigned int,
 			 unsigned long);
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 632bc21..2bf3272 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -479,7 +479,7 @@ static int ucb1x00_probe(struct mcp *mcp)
 	mcp_enable(mcp);
 	id = mcp_reg_read(mcp, UCB_ID);
 
-	if (id != UCB_ID_1200 && id != UCB_ID_1300) {
+	if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
 		printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
 		goto err_disable;
 	}
diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h
index 9c9a647..ca8df80 100644
--- a/drivers/mfd/ucb1x00.h
+++ b/drivers/mfd/ucb1x00.h
@@ -94,6 +94,7 @@
 #define UCB_ID		0x0c
 #define UCB_ID_1200		0x1004
 #define UCB_ID_1300		0x1005
+#define UCB_ID_TC35143          0x9712
 
 #define UCB_MODE	0x0d
 #define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 8933191..4e21b3b 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -565,7 +565,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	if (cmd->data)
 		flags |= SDHCI_CMD_DATA;
 
-	writel(SDHCI_MAKE_CMD(cmd->opcode, flags),
+	writew(SDHCI_MAKE_CMD(cmd->opcode, flags),
 		host->ioaddr + SDHCI_COMMAND);
 }
 
@@ -1193,10 +1193,8 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
 	version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
 	if (version != 0) {
 		printk(KERN_ERR "%s: Unknown controller version (%d). "
-			"Cowardly refusing to continue.\n", host->slot_descr,
+			"You may experience problems.\n", host->slot_descr,
 			version);
-		ret = -ENODEV;
-		goto unmap;
 	}
 
 	caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 2819de7..80e8ca0 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -17,172 +17,6 @@
 	410 Severn Ave., Suite 210
 	Annapolis MD 21403
 
-	Linux Kernel Additions:
-	
- 	0.99H+lk0.9 - David S. Miller - softnet, PCI DMA updates
- 	0.99H+lk1.0 - Jeff Garzik <jgarzik@pobox.com>
-		Remove compatibility defines for kernel versions < 2.2.x.
-		Update for new 2.3.x module interface
-	LK1.1.2 (March 19, 2000)
-	* New PCI interface (jgarzik)
-
-    LK1.1.3 25 April 2000, Andrew Morton <andrewm@uow.edu.au>
-    - Merged with 3c575_cb.c
-    - Don't set RxComplete in boomerang interrupt enable reg
-    - spinlock in vortex_timer to protect mdio functions
-    - disable local interrupts around call to vortex_interrupt in
-      vortex_tx_timeout() (So vortex_interrupt can use spin_lock())
-    - Select window 3 in vortex_timer()'s write to Wn3_MAC_Ctrl
-    - In vortex_start_xmit(), move the lock to _after_ we've altered
-      vp->cur_tx and vp->tx_full.  This defeats the race between
-      vortex_start_xmit() and vortex_interrupt which was identified
-      by Bogdan Costescu.
-    - Merged back support for six new cards from various sources
-    - Set vortex_have_pci if pci_module_init returns zero (fixes cardbus
-      insertion oops)
-    - Tell it that 3c905C has NWAY for 100bT autoneg
-    - Fix handling of SetStatusEnd in 'Too much work..' code, as
-      per 2.3.99's 3c575_cb (Dave Hinds).
-    - Split ISR into two for vortex & boomerang
-    - Fix MOD_INC/DEC races
-    - Handle resource allocation failures.
-    - Fix 3CCFE575CT LED polarity
-    - Make tx_interrupt_mitigation the default
-
-    LK1.1.4 25 April 2000, Andrew Morton <andrewm@uow.edu.au>    
-    - Add extra TxReset to vortex_up() to fix 575_cb hotplug initialisation probs.
-    - Put vortex_info_tbl into __devinitdata
-    - In the vortex_error StatsFull HACK, disable stats in vp->intr_enable as well
-      as in the hardware.
-    - Increased the loop counter in issue_and_wait from 2,000 to 4,000.
-
-    LK1.1.5 28 April 2000, andrewm
-    - Added powerpc defines (John Daniel <jdaniel@etresoft.com> said these work...)
-    - Some extra diagnostics
-    - In vortex_error(), reset the Tx on maxCollisions.  Otherwise most
-      chips usually get a Tx timeout.
-    - Added extra_reset module parm
-    - Replaced some inline timer manip with mod_timer
-      (Franois romieu <Francois.Romieu@nic.fr>)
-    - In vortex_up(), don't make Wn3_config initialisation dependent upon has_nway
-      (this came across from 3c575_cb).
-
-    LK1.1.6 06 Jun 2000, andrewm
-    - Backed out the PPC defines.
-    - Use del_timer_sync(), mod_timer().
-    - Fix wrapped ulong comparison in boomerang_rx()
-    - Add IS_TORNADO, use it to suppress 3c905C checksum error msg
-      (Donald Becker, I Lee Hetherington <ilh@sls.lcs.mit.edu>)
-    - Replace union wn3_config with BFINS/BFEXT manipulation for
-      sparc64 (Pete Zaitcev, Peter Jones)
-    - In vortex_error, do_tx_reset and vortex_tx_timeout(Vortex):
-      do a netif_wake_queue() to better recover from errors. (Anders Pedersen,
-      Donald Becker)
-    - Print a warning on out-of-memory (rate limited to 1 per 10 secs)
-    - Added two more Cardbus 575 NICs: 5b57 and 6564 (Paul Wagland)
-
-    LK1.1.7 2 Jul 2000 andrewm
-    - Better handling of shared IRQs
-    - Reset the transmitter on a Tx reclaim error
-    - Fixed crash under OOM during vortex_open() (Mark Hemment)
-    - Fix Rx cessation problem during OOM (help from Mark Hemment)
-    - The spinlocks around the mdio access were blocking interrupts for 300uS.
-      Fix all this to use spin_lock_bh() within mdio_read/write
-    - Only write to TxFreeThreshold if it's a boomerang - other NICs don't
-      have one.
-    - Added 802.3x MAC-layer flow control support
-
-   LK1.1.8 13 Aug 2000 andrewm
-    - Ignore request_region() return value - already reserved if Cardbus.
-    - Merged some additional Cardbus flags from Don's 0.99Qk
-    - Some fixes for 3c556 (Fred Maciel)
-    - Fix for EISA initialisation (Jan Rekorajski)
-    - Renamed MII_XCVR_PWR and EEPROM_230 to align with 3c575_cb and D. Becker's drivers
-    - Fixed MII_XCVR_PWR for 3CCFE575CT
-    - Added INVERT_LED_PWR, used it.
-    - Backed out the extra_reset stuff
-
-   LK1.1.9 12 Sep 2000 andrewm
-    - Backed out the tx_reset_resume flags.  It was a no-op.
-    - In vortex_error, don't reset the Tx on txReclaim errors
-    - In vortex_error, don't reset the Tx on maxCollisions errors.
-      Hence backed out all the DownListPtr logic here.
-    - In vortex_error, give Tornado cards a partial TxReset on
-      maxCollisions (David Hinds).  Defined MAX_COLLISION_RESET for this.
-    - Redid some driver flags and device names based on pcmcia_cs-3.1.20.
-    - Fixed a bug where, if vp->tx_full is set when the interface
-      is downed, it remains set when the interface is upped.  Bad
-      things happen.
-
-   LK1.1.10 17 Sep 2000 andrewm
-    - Added EEPROM_8BIT for 3c555 (Fred Maciel)
-    - Added experimental support for the 3c556B Laptop Hurricane (Louis Gerbarg)
-    - Add HAS_NWAY to "3c900 Cyclone 10Mbps TPO"
-
-   LK1.1.11 13 Nov 2000 andrewm
-    - Dump MOD_INC/DEC_USE_COUNT, use SET_MODULE_OWNER
-
-   LK1.1.12 1 Jan 2001 andrewm (2.4.0-pre1)
-    - Call pci_enable_device before we request our IRQ (Tobias Ringstrom)
-    - Add 3c590 PCI latency timer hack to vortex_probe1 (from 0.99Ra)
-    - Added extended issue_and_wait for the 3c905CX.
-    - Look for an MII on PHY index 24 first (3c905CX oddity).
-    - Add HAS_NWAY to 3cSOHO100-TX (Brett Frankenberger)
-    - Don't free skbs we don't own on oom path in vortex_open().
-
-   LK1.1.13 27 Jan 2001
-    - Added explicit `medialock' flag so we can truly
-      lock the media type down with `options'.
-    - "check ioremap return and some tidbits" (Arnaldo Carvalho de Melo <acme@conectiva.com.br>)
-    - Added and used EEPROM_NORESET for 3c556B PM resumes.
-    - Fixed leakage of vp->rx_ring.
-    - Break out separate HAS_HWCKSM device capability flag.
-    - Kill vp->tx_full (ANK)
-    - Merge zerocopy fragment handling (ANK?)
-
-   LK1.1.14 15 Feb 2001
-    - Enable WOL.  Can be turned on with `enable_wol' module option.
-    - EISA and PCI initialisation fixes (jgarzik, Manfred Spraul)
-    - If a device's internalconfig register reports it has NWAY,
-      use it, even if autoselect is enabled.
-
-   LK1.1.15 6 June 2001 akpm
-    - Prevent double counting of received bytes (Lars Christensen)
-    - Add ethtool support (jgarzik)
-    - Add module parm descriptions (Andrzej M. Krzysztofowicz)
-    - Implemented alloc_etherdev() API
-    - Special-case the 'Tx error 82' message.
-
-   LK1.1.16 18 July 2001 akpm
-    - Make NETIF_F_SG dependent upon nr_free_highpages(), not on CONFIG_HIGHMEM
-    - Lessen verbosity of bootup messages
-    - Fix WOL - use new PM API functions.
-    - Use netif_running() instead of vp->open in suspend/resume.
-    - Don't reset the interface logic on open/close/rmmod.  It upsets
-      autonegotiation, and hence DHCP (from 0.99T).
-    - Back out EEPROM_NORESET flag because of the above (we do it for all
-      NICs).
-    - Correct 3c982 identification string
-    - Rename wait_for_completion() to issue_and_wait() to avoid completion.h
-      clash.
-
-   LK1.1.17 18Dec01 akpm
-    - PCI ID 9805 is a Python-T, not a dual-port Cyclone.  Apparently.
-      And it has NWAY.
-    - Mask our advertised modes (vp->advertising) with our capabilities
-	  (MII reg5) when deciding which duplex mode to use.
-    - Add `global_options' as default for options[].  Ditto global_enable_wol,
-      global_full_duplex.
-
-   LK1.1.18 01Jul02 akpm
-    - Fix for undocumented transceiver power-up bit on some 3c566B's
-      (Donald Becker, Rahul Karnik)
-
-    - See http://www.zip.com.au/~akpm/linux/#3c59x-2.3 for more details.
-    - Also see Documentation/networking/vortex.txt
-
-   LK1.1.19 10Nov02 Marc Zyngier <maz@wild-wind.fr.eu.org>
-    - EISA sysfs integration.
 */
 
 /*
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index d2150ba..1428bb7 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1916,7 +1916,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	regs = ioremap(pciaddr, CP_REGS_SIZE);
 	if (!regs) {
 		rc = -EIO;
-		dev_err(&pdev->dev, "Cannot map PCI MMIO (%lx@%lx)\n",
+		dev_err(&pdev->dev, "Cannot map PCI MMIO (%Lx@%Lx)\n",
 		       (unsigned long long)pci_resource_len(pdev, 1),
 		       (unsigned long long)pciaddr);
 		goto err_out_res;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index cd97185..e4f4eaf 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -1709,6 +1709,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	void __iomem *ioaddr = tp->mmio_addr;
 	unsigned int entry;
 	unsigned int len = skb->len;
+	unsigned long flags;
 
 	/* Calculate the next Tx descriptor entry. */
 	entry = tp->cur_tx % NUM_TX_DESC;
@@ -1725,7 +1726,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
 		return 0;
 	}
 
-	spin_lock_irq(&tp->lock);
+	spin_lock_irqsave(&tp->lock, flags);
 	RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
 		   tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
 
@@ -1736,7 +1737,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
 
 	if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
 		netif_stop_queue (dev);
-	spin_unlock_irq(&tp->lock);
+	spin_unlock_irqrestore(&tp->lock, flags);
 
 	if (netif_msg_tx_queued(tp))
 		printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 64b6a72..db73de0 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1639,7 +1639,7 @@ bnx2_tx_int(struct bnx2 *bp)
 		skb = tx_buf->skb;
 #ifdef BCM_TSO 
 		/* partial BD completions possible with TSO packets */
-		if (skb_shinfo(skb)->gso_size) {
+		if (skb_is_gso(skb)) {
 			u16 last_idx, last_ring_idx;
 
 			last_idx = sw_cons +
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 87f94d9..61b3754 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1417,7 +1417,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct cpl_tx_pkt *cpl;
 
 #ifdef NETIF_F_TSO
-	if (skb_shinfo(skb)->gso_size) {
+	if (skb_is_gso(skb)) {
 		int eth_type;
 		struct cpl_tx_pkt_lso *hdr;
 
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 3042d33..f411bbb 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -68,7 +68,6 @@
 #ifdef NETIF_F_TSO
 #include <net/checksum.h>
 #endif
-#include <linux/workqueue.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
@@ -143,6 +142,7 @@ struct e1000_adapter;
 
 #define AUTO_ALL_MODES            0
 #define E1000_EEPROM_82544_APM    0x0004
+#define E1000_EEPROM_ICH8_APME    0x0004
 #define E1000_EEPROM_APME         0x0400
 
 #ifndef E1000_MASTER_SLAVE
@@ -254,7 +254,6 @@ struct e1000_adapter {
 	spinlock_t tx_queue_lock;
 #endif
 	atomic_t irq_sem;
-	struct work_struct watchdog_task;
 	struct work_struct reset_task;
 	uint8_t fc_autoneg;
 
@@ -339,8 +338,14 @@ struct e1000_adapter {
 #ifdef NETIF_F_TSO
 	boolean_t tso_force;
 #endif
+	boolean_t smart_power_down;	/* phy smart power down */
+	unsigned long flags;
 };
 
+enum e1000_state_t {
+	__E1000_DRIVER_TESTING,
+	__E1000_RESETTING,
+};
 
 /*  e1000_main.c  */
 extern char e1000_driver_name[];
@@ -348,6 +353,7 @@ extern char e1000_driver_version[];
 int e1000_up(struct e1000_adapter *adapter);
 void e1000_down(struct e1000_adapter *adapter);
 void e1000_reset(struct e1000_adapter *adapter);
+void e1000_reinit_locked(struct e1000_adapter *adapter);
 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index d196648..88a82ba 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -109,7 +109,8 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 		                   SUPPORTED_1000baseT_Full|
 		                   SUPPORTED_Autoneg |
 		                   SUPPORTED_TP);
-
+		if (hw->phy_type == e1000_phy_ife)
+			ecmd->supported &= ~SUPPORTED_1000baseT_Full;
 		ecmd->advertising = ADVERTISED_TP;
 
 		if (hw->autoneg == 1) {
@@ -203,11 +204,9 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 
 	/* reset the link */
 
-	if (netif_running(adapter->netdev)) {
-		e1000_down(adapter);
-		e1000_reset(adapter);
-		e1000_up(adapter);
-	} else
+	if (netif_running(adapter->netdev))
+		e1000_reinit_locked(adapter);
+	else
 		e1000_reset(adapter);
 
 	return 0;
@@ -254,10 +253,9 @@ e1000_set_pauseparam(struct net_device *netdev,
 	hw->original_fc = hw->fc;
 
 	if (adapter->fc_autoneg == AUTONEG_ENABLE) {
-		if (netif_running(adapter->netdev)) {
-			e1000_down(adapter);
-			e1000_up(adapter);
-		} else
+		if (netif_running(adapter->netdev))
+			e1000_reinit_locked(adapter);
+		else
 			e1000_reset(adapter);
 	} else
 		return ((hw->media_type == e1000_media_type_fiber) ?
@@ -279,10 +277,9 @@ e1000_set_rx_csum(struct net_device *netdev, uint32_t data)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	adapter->rx_csum = data;
 
-	if (netif_running(netdev)) {
-		e1000_down(adapter);
-		e1000_up(adapter);
-	} else
+	if (netif_running(netdev))
+		e1000_reinit_locked(adapter);
+	else
 		e1000_reset(adapter);
 	return 0;
 }
@@ -577,6 +574,7 @@ e1000_get_drvinfo(struct net_device *netdev,
 	case e1000_82572:
 	case e1000_82573:
 	case e1000_80003es2lan:
+	case e1000_ich8lan:
 		sprintf(firmware_version, "%d.%d-%d",
 			(eeprom_data & 0xF000) >> 12,
 			(eeprom_data & 0x0FF0) >> 4,
@@ -631,6 +629,9 @@ e1000_set_ringparam(struct net_device *netdev,
 	tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
 	rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
 
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+		msleep(1);
+
 	if (netif_running(adapter->netdev))
 		e1000_down(adapter);
 
@@ -691,9 +692,11 @@ e1000_set_ringparam(struct net_device *netdev,
 		adapter->rx_ring = rx_new;
 		adapter->tx_ring = tx_new;
 		if ((err = e1000_up(adapter)))
-			return err;
+			goto err_setup;
 	}
 
+	clear_bit(__E1000_RESETTING, &adapter->flags);
+
 	return 0;
 err_setup_tx:
 	e1000_free_all_rx_resources(adapter);
@@ -701,6 +704,8 @@ err_setup_rx:
 	adapter->rx_ring = rx_old;
 	adapter->tx_ring = tx_old;
 	e1000_up(adapter);
+err_setup:
+	clear_bit(__E1000_RESETTING, &adapter->flags);
 	return err;
 }
 
@@ -754,6 +759,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 		toggle = 0x7FFFF3FF;
 		break;
 	case e1000_82573:
+	case e1000_ich8lan:
 		toggle = 0x7FFFF033;
 		break;
 	default:
@@ -773,11 +779,12 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 	}
 	/* restore previous status */
 	E1000_WRITE_REG(&adapter->hw, STATUS, before);
-
-	REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
-	REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
-	REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
-	REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+	if (adapter->hw.mac_type != e1000_ich8lan) {
+		REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+		REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+		REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+		REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+	}
 	REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
 	REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
 	REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
@@ -790,20 +797,22 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 	REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
 
 	REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
-	REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0x003FFFFB);
+	before = (adapter->hw.mac_type == e1000_ich8lan ?
+			0x06C3B33E : 0x06DFB3FE);
+	REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
 	REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
 
 	if (adapter->hw.mac_type >= e1000_82543) {
 
-		REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0xFFFFFFFF);
+		REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
 		REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
-		REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+		if (adapter->hw.mac_type != e1000_ich8lan)
+			REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
 		REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 		REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
-
-		for (i = 0; i < E1000_RAR_ENTRIES; i++) {
-			REG_PATTERN_TEST(RA + ((i << 1) << 2), 0xFFFFFFFF,
-					 0xFFFFFFFF);
+		value = (adapter->hw.mac_type == e1000_ich8lan ?
+				E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
+		for (i = 0; i < value; i++) {
 			REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
 					 0xFFFFFFFF);
 		}
@@ -817,7 +826,9 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 
 	}
 
-	for (i = 0; i < E1000_MC_TBL_SIZE; i++)
+	value = (adapter->hw.mac_type == e1000_ich8lan ?
+			E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE);
+	for (i = 0; i < value; i++)
 		REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
 
 	*data = 0;
@@ -889,6 +900,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
 	/* Test each interrupt */
 	for (; i < 10; i++) {
 
+		if (adapter->hw.mac_type == e1000_ich8lan && i == 8)
+			continue;
 		/* Interrupt to test */
 		mask = 1 << i;
 
@@ -1246,18 +1259,33 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 	} else if (adapter->hw.phy_type == e1000_phy_gg82563) {
 		e1000_write_phy_reg(&adapter->hw,
 		                    GG82563_PHY_KMRN_MODE_CTRL,
-		                    0x1CE);
+		                    0x1CC);
 	}
-	/* force 1000, set loopback */
-	e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
 
-	/* Now set up the MAC to the same speed/duplex as the PHY. */
 	ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
-	ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
-	ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
-		     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
-		     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
-		     E1000_CTRL_FD);	 /* Force Duplex to FULL */
+
+	if (adapter->hw.phy_type == e1000_phy_ife) {
+		/* force 100, set loopback */
+		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x6100);
+
+		/* Now set up the MAC to the same speed/duplex as the PHY. */
+		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+			     E1000_CTRL_SPD_100 |/* Force Speed to 100 */
+			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
+	} else {
+		/* force 1000, set loopback */
+		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
+
+		/* Now set up the MAC to the same speed/duplex as the PHY. */
+		ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
+		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+			     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
+	}
 
 	if (adapter->hw.media_type == e1000_media_type_copper &&
 	   adapter->hw.phy_type == e1000_phy_m88) {
@@ -1317,6 +1345,7 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter)
 	case e1000_82572:
 	case e1000_82573:
 	case e1000_80003es2lan:
+	case e1000_ich8lan:
 		return e1000_integrated_phy_loopback(adapter);
 		break;
 
@@ -1568,6 +1597,7 @@ e1000_diag_test(struct net_device *netdev,
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	boolean_t if_running = netif_running(netdev);
 
+	set_bit(__E1000_DRIVER_TESTING, &adapter->flags);
 	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
 		/* Offline tests */
 
@@ -1582,7 +1612,8 @@ e1000_diag_test(struct net_device *netdev,
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		if (if_running)
-			e1000_down(adapter);
+			/* indicate we're in test mode */
+			dev_close(netdev);
 		else
 			e1000_reset(adapter);
 
@@ -1607,8 +1638,9 @@ e1000_diag_test(struct net_device *netdev,
 		adapter->hw.autoneg = autoneg;
 
 		e1000_reset(adapter);
+		clear_bit(__E1000_DRIVER_TESTING, &adapter->flags);
 		if (if_running)
-			e1000_up(adapter);
+			dev_open(netdev);
 	} else {
 		/* Online tests */
 		if (e1000_link_test(adapter, &data[4]))
@@ -1619,6 +1651,8 @@ e1000_diag_test(struct net_device *netdev,
 		data[1] = 0;
 		data[2] = 0;
 		data[3] = 0;
+
+		clear_bit(__E1000_DRIVER_TESTING, &adapter->flags);
 	}
 	msleep_interruptible(4 * 1000);
 }
@@ -1778,21 +1812,18 @@ e1000_phys_id(struct net_device *netdev, uint32_t data)
 		mod_timer(&adapter->blink_timer, jiffies);
 		msleep_interruptible(data * 1000);
 		del_timer_sync(&adapter->blink_timer);
-	} else if (adapter->hw.mac_type < e1000_82573) {
-		E1000_WRITE_REG(&adapter->hw, LEDCTL,
-			(E1000_LEDCTL_LED2_BLINK_RATE |
-			 E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK |
-			 (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT)));
+	} else if (adapter->hw.phy_type == e1000_phy_ife) {
+		if (!adapter->blink_timer.function) {
+			init_timer(&adapter->blink_timer);
+			adapter->blink_timer.function = e1000_led_blink_callback;
+			adapter->blink_timer.data = (unsigned long) adapter;
+		}
+		mod_timer(&adapter->blink_timer, jiffies);
 		msleep_interruptible(data * 1000);
+		del_timer_sync(&adapter->blink_timer);
+		e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0);
 	} else {
-		E1000_WRITE_REG(&adapter->hw, LEDCTL,
-			(E1000_LEDCTL_LED2_BLINK_RATE |
-			 E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK |
-			 (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT)));
+		e1000_blink_led_start(&adapter->hw);
 		msleep_interruptible(data * 1000);
 	}
 
@@ -1807,10 +1838,8 @@ static int
 e1000_nway_reset(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	if (netif_running(netdev)) {
-		e1000_down(adapter);
-		e1000_up(adapter);
-	}
+	if (netif_running(netdev))
+		e1000_reinit_locked(adapter);
 	return 0;
 }
 
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 3959039..583518a 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -101,7 +101,8 @@ static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset,
 
 #define E1000_WRITE_REG_IO(a, reg, val) \
 	    e1000_write_reg_io((a), E1000_##reg, val)
-static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw);
+static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw,
+                                               uint16_t duplex);
 static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
 
 /* IGP cable length table */
@@ -156,6 +157,14 @@ e1000_set_phy_type(struct e1000_hw *hw)
             hw->phy_type = e1000_phy_igp;
             break;
         }
+    case IGP03E1000_E_PHY_ID:
+        hw->phy_type = e1000_phy_igp_3;
+        break;
+    case IFE_E_PHY_ID:
+    case IFE_PLUS_E_PHY_ID:
+    case IFE_C_E_PHY_ID:
+        hw->phy_type = e1000_phy_ife;
+        break;
     case GG82563_E_PHY_ID:
         if (hw->mac_type == e1000_80003es2lan) {
             hw->phy_type = e1000_phy_gg82563;
@@ -332,6 +341,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
         break;
     case E1000_DEV_ID_82541EI:
     case E1000_DEV_ID_82541EI_MOBILE:
+    case E1000_DEV_ID_82541ER_LOM:
         hw->mac_type = e1000_82541;
         break;
     case E1000_DEV_ID_82541ER:
@@ -341,6 +351,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
         hw->mac_type = e1000_82541_rev_2;
         break;
     case E1000_DEV_ID_82547EI:
+    case E1000_DEV_ID_82547EI_MOBILE:
         hw->mac_type = e1000_82547;
         break;
     case E1000_DEV_ID_82547GI:
@@ -354,6 +365,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
     case E1000_DEV_ID_82572EI_COPPER:
     case E1000_DEV_ID_82572EI_FIBER:
     case E1000_DEV_ID_82572EI_SERDES:
+    case E1000_DEV_ID_82572EI:
         hw->mac_type = e1000_82572;
         break;
     case E1000_DEV_ID_82573E:
@@ -361,16 +373,29 @@ e1000_set_mac_type(struct e1000_hw *hw)
     case E1000_DEV_ID_82573L:
         hw->mac_type = e1000_82573;
         break;
+    case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
+    case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
     case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
     case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
         hw->mac_type = e1000_80003es2lan;
         break;
+    case E1000_DEV_ID_ICH8_IGP_M_AMT:
+    case E1000_DEV_ID_ICH8_IGP_AMT:
+    case E1000_DEV_ID_ICH8_IGP_C:
+    case E1000_DEV_ID_ICH8_IFE:
+    case E1000_DEV_ID_ICH8_IGP_M:
+        hw->mac_type = e1000_ich8lan;
+        break;
     default:
         /* Should never have loaded on this device */
         return -E1000_ERR_MAC_TYPE;
     }
 
     switch(hw->mac_type) {
+    case e1000_ich8lan:
+        hw->swfwhw_semaphore_present = TRUE;
+        hw->asf_firmware_present = TRUE;
+        break;
     case e1000_80003es2lan:
         hw->swfw_sync_present = TRUE;
         /* fall through */
@@ -423,6 +448,7 @@ e1000_set_media_type(struct e1000_hw *hw)
         case e1000_82542_rev2_1:
             hw->media_type = e1000_media_type_fiber;
             break;
+        case e1000_ich8lan:
         case e1000_82573:
             /* The STATUS_TBIMODE bit is reserved or reused for the this
              * device.
@@ -527,6 +553,14 @@ e1000_reset_hw(struct e1000_hw *hw)
         } while(timeout);
     }
 
+    /* Workaround for ICH8 bit corruption issue in FIFO memory */
+    if (hw->mac_type == e1000_ich8lan) {
+        /* Set Tx and Rx buffer allocation to 8k apiece. */
+        E1000_WRITE_REG(hw, PBA, E1000_PBA_8K);
+        /* Set Packet Buffer Size to 16k. */
+        E1000_WRITE_REG(hw, PBS, E1000_PBS_16K);
+    }
+
     /* Issue a global reset to the MAC.  This will reset the chip's
      * transmit, receive, DMA, and link units.  It will not effect
      * the current PCI configuration.  The global reset bit is self-
@@ -550,6 +584,20 @@ e1000_reset_hw(struct e1000_hw *hw)
             /* Reset is performed on a shadow of the control register */
             E1000_WRITE_REG(hw, CTRL_DUP, (ctrl | E1000_CTRL_RST));
             break;
+        case e1000_ich8lan:
+            if (!hw->phy_reset_disable &&
+                e1000_check_phy_reset_block(hw) == E1000_SUCCESS) {
+                /* e1000_ich8lan PHY HW reset requires MAC CORE reset
+                 * at the same time to make sure the interface between
+                 * MAC and the external PHY is reset.
+                 */
+                ctrl |= E1000_CTRL_PHY_RST;
+            }
+
+            e1000_get_software_flag(hw);
+            E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
+            msec_delay(5);
+            break;
         default:
             E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
             break;
@@ -591,6 +639,7 @@ e1000_reset_hw(struct e1000_hw *hw)
             /* fall through */
         case e1000_82571:
         case e1000_82572:
+        case e1000_ich8lan:
         case e1000_80003es2lan:
             ret_val = e1000_get_auto_rd_done(hw);
             if(ret_val)
@@ -633,6 +682,12 @@ e1000_reset_hw(struct e1000_hw *hw)
             e1000_pci_set_mwi(hw);
     }
 
+    if (hw->mac_type == e1000_ich8lan) {
+        uint32_t kab = E1000_READ_REG(hw, KABGTXD);
+        kab |= E1000_KABGTXD_BGSQLBIAS;
+        E1000_WRITE_REG(hw, KABGTXD, kab);
+    }
+
     return E1000_SUCCESS;
 }
 
@@ -675,9 +730,12 @@ e1000_init_hw(struct e1000_hw *hw)
 
     /* Disabling VLAN filtering. */
     DEBUGOUT("Initializing the IEEE VLAN\n");
-    if (hw->mac_type < e1000_82545_rev_3)
-        E1000_WRITE_REG(hw, VET, 0);
-    e1000_clear_vfta(hw);
+    /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */
+    if (hw->mac_type != e1000_ich8lan) {
+        if (hw->mac_type < e1000_82545_rev_3)
+            E1000_WRITE_REG(hw, VET, 0);
+        e1000_clear_vfta(hw);
+    }
 
     /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
     if(hw->mac_type == e1000_82542_rev2_0) {
@@ -705,8 +763,14 @@ e1000_init_hw(struct e1000_hw *hw)
     /* Zero out the Multicast HASH table */
     DEBUGOUT("Zeroing the MTA\n");
     mta_size = E1000_MC_TBL_SIZE;
-    for(i = 0; i < mta_size; i++)
+    if (hw->mac_type == e1000_ich8lan)
+        mta_size = E1000_MC_TBL_SIZE_ICH8LAN;
+    for(i = 0; i < mta_size; i++) {
         E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+        /* use write flush to prevent Memory Write Block (MWB) from
+         * occuring when accessing our register space */
+        E1000_WRITE_FLUSH(hw);
+    }
 
     /* Set the PCI priority bit correctly in the CTRL register.  This
      * determines if the adapter gives priority to receives, or if it
@@ -744,6 +808,10 @@ e1000_init_hw(struct e1000_hw *hw)
         break;
     }
 
+    /* More time needed for PHY to initialize */
+    if (hw->mac_type == e1000_ich8lan)
+        msec_delay(15);
+
     /* Call a subroutine to configure the link and setup flow control. */
     ret_val = e1000_setup_link(hw);
 
@@ -757,6 +825,7 @@ e1000_init_hw(struct e1000_hw *hw)
         case e1000_82571:
         case e1000_82572:
         case e1000_82573:
+        case e1000_ich8lan:
         case e1000_80003es2lan:
             ctrl |= E1000_TXDCTL_COUNT_DESC;
             break;
@@ -795,6 +864,7 @@ e1000_init_hw(struct e1000_hw *hw)
         /* Fall through */
     case e1000_82571:
     case e1000_82572:
+    case e1000_ich8lan:
         ctrl = E1000_READ_REG(hw, TXDCTL1);
         ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
         if(hw->mac_type >= e1000_82571)
@@ -818,6 +888,11 @@ e1000_init_hw(struct e1000_hw *hw)
      */
     e1000_clear_hw_cntrs(hw);
 
+    /* ICH8 No-snoop bits are opposite polarity.
+     * Set to snoop by default after reset. */
+    if (hw->mac_type == e1000_ich8lan)
+        e1000_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL);
+
     if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
         hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
         ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
@@ -905,6 +980,7 @@ e1000_setup_link(struct e1000_hw *hw)
      */
     if (hw->fc == e1000_fc_default) {
         switch (hw->mac_type) {
+        case e1000_ich8lan:
         case e1000_82573:
             hw->fc = e1000_fc_full;
             break;
@@ -971,9 +1047,12 @@ e1000_setup_link(struct e1000_hw *hw)
      */
     DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
 
-    E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
-    E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
-    E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
+    /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */
+    if (hw->mac_type != e1000_ich8lan) {
+        E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
+        E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+        E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
+    }
 
     E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time);
 
@@ -1237,12 +1316,13 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
 
     /* Wait 10ms for MAC to configure PHY from eeprom settings */
     msec_delay(15);
-
+    if (hw->mac_type != e1000_ich8lan) {
     /* Configure activity LED after PHY reset */
     led_ctrl = E1000_READ_REG(hw, LEDCTL);
     led_ctrl &= IGP_ACTIVITY_LED_MASK;
     led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
     E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
+    }
 
     /* disable lplu d3 during driver init */
     ret_val = e1000_set_d3_lplu_state(hw, FALSE);
@@ -1478,8 +1558,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw)
             if (ret_val)
                 return ret_val;
 
-            /* Enable Pass False Carrier on the PHY */
-            phy_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+            phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
 
             ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
                                           phy_data);
@@ -1561,28 +1640,40 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw)
     phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
     if(hw->disable_polarity_correction == 1)
         phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
-        ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-        if(ret_val)
-            return ret_val;
-
-    /* Force TX_CLK in the Extended PHY Specific Control Register
-     * to 25MHz clock.
-     */
-    ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
-    if(ret_val)
+    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+    if (ret_val)
         return ret_val;
 
-    phy_data |= M88E1000_EPSCR_TX_CLK_25;
-
     if (hw->phy_revision < M88E1011_I_REV_4) {
-        /* Configure Master and Slave downshift values */
-        phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+        /* Force TX_CLK in the Extended PHY Specific Control Register
+         * to 25MHz clock.
+         */
+        ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+        if (ret_val)
+            return ret_val;
+
+        phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+        if ((hw->phy_revision == E1000_REVISION_2) &&
+            (hw->phy_id == M88E1111_I_PHY_ID)) {
+            /* Vidalia Phy, set the downshift counter to 5x */
+            phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
+            phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+            ret_val = e1000_write_phy_reg(hw,
+                                        M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+            if (ret_val)
+                return ret_val;
+        } else {
+            /* Configure Master and Slave downshift values */
+            phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
                               M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
-        phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+            phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
                              M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
-        ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
-        if(ret_val)
-            return ret_val;
+            ret_val = e1000_write_phy_reg(hw,
+                                        M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+            if (ret_val)
+               return ret_val;
+        }
     }
 
     /* SW Reset the PHY so all changes take effect */
@@ -1620,6 +1711,10 @@ e1000_copper_link_autoneg(struct e1000_hw *hw)
     if(hw->autoneg_advertised == 0)
         hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
+    /* IFE phy only supports 10/100 */
+    if (hw->phy_type == e1000_phy_ife)
+        hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
+
     DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
     ret_val = e1000_phy_setup_autoneg(hw);
     if(ret_val) {
@@ -1717,6 +1812,26 @@ e1000_setup_copper_link(struct e1000_hw *hw)
 
     DEBUGFUNC("e1000_setup_copper_link");
 
+    switch (hw->mac_type) {
+    case e1000_80003es2lan:
+    case e1000_ich8lan:
+        /* Set the mac to wait the maximum time between each
+         * iteration and increase the max iterations when
+         * polling the phy; this fixes erroneous timeouts at 10Mbps. */
+        ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
+        if (ret_val)
+            return ret_val;
+        ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), &reg_data);
+        if (ret_val)
+            return ret_val;
+        reg_data |= 0x3F;
+        ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
+        if (ret_val)
+            return ret_val;
+    default:
+        break;
+    }
+
     /* Check if it is a valid PHY and set PHY mode if necessary. */
     ret_val = e1000_copper_link_preconfig(hw);
     if(ret_val)
@@ -1724,10 +1839,8 @@ e1000_setup_copper_link(struct e1000_hw *hw)
 
     switch (hw->mac_type) {
     case e1000_80003es2lan:
-        ret_val = e1000_read_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
-                                      &reg_data);
-        if (ret_val)
-            return ret_val;
+        /* Kumeran registers are written-only */
+        reg_data = E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT;
         reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING;
         ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
                                        reg_data);
@@ -1739,6 +1852,7 @@ e1000_setup_copper_link(struct e1000_hw *hw)
     }
 
     if (hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
         hw->phy_type == e1000_phy_igp_2) {
         ret_val = e1000_copper_link_igp_setup(hw);
         if(ret_val)
@@ -1803,7 +1917,7 @@ e1000_setup_copper_link(struct e1000_hw *hw)
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
 static int32_t
-e1000_configure_kmrn_for_10_100(struct e1000_hw *hw)
+e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex)
 {
     int32_t ret_val = E1000_SUCCESS;
     uint32_t tipg;
@@ -1823,6 +1937,18 @@ e1000_configure_kmrn_for_10_100(struct e1000_hw *hw)
     tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100;
     E1000_WRITE_REG(hw, TIPG, tipg);
 
+    ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
+
+    if (ret_val)
+        return ret_val;
+
+    if (duplex == HALF_DUPLEX)
+        reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+    else
+        reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+
+    ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
     return ret_val;
 }
 
@@ -1847,6 +1973,14 @@ e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
     tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
     E1000_WRITE_REG(hw, TIPG, tipg);
 
+    ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
+
+    if (ret_val)
+        return ret_val;
+
+    reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+    ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
     return ret_val;
 }
 
@@ -1869,10 +2003,13 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
     if(ret_val)
         return ret_val;
 
-    /* Read the MII 1000Base-T Control Register (Address 9). */
-    ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
-    if(ret_val)
-        return ret_val;
+    if (hw->phy_type != e1000_phy_ife) {
+        /* Read the MII 1000Base-T Control Register (Address 9). */
+        ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+        if (ret_val)
+            return ret_val;
+    } else
+        mii_1000t_ctrl_reg=0;
 
     /* Need to parse both autoneg_advertised and fc and set up
      * the appropriate PHY registers.  First we will parse for
@@ -1923,6 +2060,9 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
     if(hw->autoneg_advertised & ADVERTISE_1000_FULL) {
         DEBUGOUT("Advertise 1000mb Full duplex\n");
         mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+        if (hw->phy_type == e1000_phy_ife) {
+            DEBUGOUT("e1000_phy_ife is a 10/100 PHY. Gigabit speed is not supported.\n");
+        }
     }
 
     /* Check for a software override of the flow control settings, and
@@ -1984,9 +2124,11 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
 
     DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
 
-    ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
-    if(ret_val)
-        return ret_val;
+    if (hw->phy_type != e1000_phy_ife) {
+        ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+        if (ret_val)
+            return ret_val;
+    }
 
     return E1000_SUCCESS;
 }
@@ -2089,6 +2231,18 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 
         /* Need to reset the PHY or these changes will be ignored */
         mii_ctrl_reg |= MII_CR_RESET;
+    /* Disable MDI-X support for 10/100 */
+    } else if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+        if (ret_val)
+            return ret_val;
+
+        phy_data &= ~IFE_PMC_AUTO_MDIX;
+        phy_data &= ~IFE_PMC_FORCE_MDIX;
+
+        ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data);
+        if (ret_val)
+            return ret_val;
     } else {
         /* Clear Auto-Crossover to force MDI manually.  IGP requires MDI
          * forced whenever speed or duplex are forced.
@@ -2721,8 +2875,12 @@ e1000_check_for_link(struct e1000_hw *hw)
          */
         if(hw->tbi_compatibility_en) {
             uint16_t speed, duplex;
-            e1000_get_speed_and_duplex(hw, &speed, &duplex);
-            if(speed != SPEED_1000) {
+            ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+            if (ret_val) {
+                DEBUGOUT("Error getting link speed and duplex\n");
+                return ret_val;
+            }
+            if (speed != SPEED_1000) {
                 /* If link speed is not set to gigabit speed, we do not need
                  * to enable TBI compatibility.
                  */
@@ -2889,7 +3047,13 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw,
         if (*speed == SPEED_1000)
             ret_val = e1000_configure_kmrn_for_1000(hw);
         else
-            ret_val = e1000_configure_kmrn_for_10_100(hw);
+            ret_val = e1000_configure_kmrn_for_10_100(hw, *duplex);
+        if (ret_val)
+            return ret_val;
+    }
+
+    if ((hw->phy_type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
+        ret_val = e1000_kumeran_lock_loss_workaround(hw);
         if (ret_val)
             return ret_val;
     }
@@ -3079,6 +3243,9 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
 
     DEBUGFUNC("e1000_swfw_sync_acquire");
 
+    if (hw->swfwhw_semaphore_present)
+        return e1000_get_software_flag(hw);
+
     if (!hw->swfw_sync_present)
         return e1000_get_hw_eeprom_semaphore(hw);
 
@@ -3118,6 +3285,11 @@ e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask)
 
     DEBUGFUNC("e1000_swfw_sync_release");
 
+    if (hw->swfwhw_semaphore_present) {
+        e1000_release_software_flag(hw);
+        return;
+    }
+
     if (!hw->swfw_sync_present) {
         e1000_put_hw_eeprom_semaphore(hw);
         return;
@@ -3160,7 +3332,8 @@ e1000_read_phy_reg(struct e1000_hw *hw,
     if (e1000_swfw_sync_acquire(hw, swfw))
         return -E1000_ERR_SWFW_SYNC;
 
-    if((hw->phy_type == e1000_phy_igp ||
+    if ((hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
         hw->phy_type == e1000_phy_igp_2) &&
        (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
         ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -3299,7 +3472,8 @@ e1000_write_phy_reg(struct e1000_hw *hw,
     if (e1000_swfw_sync_acquire(hw, swfw))
         return -E1000_ERR_SWFW_SYNC;
 
-    if((hw->phy_type == e1000_phy_igp ||
+    if ((hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
         hw->phy_type == e1000_phy_igp_2) &&
        (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
         ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -3514,7 +3688,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
         E1000_WRITE_FLUSH(hw);
 
         if (hw->mac_type >= e1000_82571)
-            msec_delay(10);
+            msec_delay_irq(10);
         e1000_swfw_sync_release(hw, swfw);
     } else {
         /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
@@ -3544,6 +3718,12 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
     ret_val = e1000_get_phy_cfg_done(hw);
     e1000_release_software_semaphore(hw);
 
+        if ((hw->mac_type == e1000_ich8lan) &&
+            (hw->phy_type == e1000_phy_igp_3)) {
+            ret_val = e1000_init_lcd_from_nvm(hw);
+            if (ret_val)
+                return ret_val;
+        }
     return ret_val;
 }
 
@@ -3572,9 +3752,11 @@ e1000_phy_reset(struct e1000_hw *hw)
     case e1000_82541_rev_2:
     case e1000_82571:
     case e1000_82572:
+    case e1000_ich8lan:
         ret_val = e1000_phy_hw_reset(hw);
         if(ret_val)
             return ret_val;
+
         break;
     default:
         ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
@@ -3597,11 +3779,120 @@ e1000_phy_reset(struct e1000_hw *hw)
 }
 
 /******************************************************************************
+* Work-around for 82566 power-down: on D3 entry-
+* 1) disable gigabit link
+* 2) write VR power-down enable
+* 3) read it back
+* if successful continue, else issue LCD reset and repeat
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+void
+e1000_phy_powerdown_workaround(struct e1000_hw *hw)
+{
+    int32_t reg;
+    uint16_t phy_data;
+    int32_t retry = 0;
+
+    DEBUGFUNC("e1000_phy_powerdown_workaround");
+
+    if (hw->phy_type != e1000_phy_igp_3)
+        return;
+
+    do {
+        /* Disable link */
+        reg = E1000_READ_REG(hw, PHY_CTRL);
+        E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+                        E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+
+        /* Write VR power-down enable */
+        e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+        e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data |
+                            IGP3_VR_CTRL_MODE_SHUT);
+
+        /* Read it back and test */
+        e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+        if ((phy_data & IGP3_VR_CTRL_MODE_SHUT) || retry)
+            break;
+
+        /* Issue PHY reset and repeat at most one more time */
+        reg = E1000_READ_REG(hw, CTRL);
+        E1000_WRITE_REG(hw, CTRL, reg | E1000_CTRL_PHY_RST);
+        retry++;
+    } while (retry);
+
+    return;
+
+}
+
+/******************************************************************************
+* Work-around for 82566 Kumeran PCS lock loss:
+* On link status change (i.e. PCI reset, speed change) and link is up and
+* speed is gigabit-
+* 0) if workaround is optionally disabled do nothing
+* 1) wait 1ms for Kumeran link to come up
+* 2) check Kumeran Diagnostic register PCS lock loss bit
+* 3) if not set the link is locked (all is good), otherwise...
+* 4) reset the PHY
+* 5) repeat up to 10 times
+* Note: this is only called for IGP3 copper when speed is 1gb.
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+int32_t
+e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
+{
+    int32_t ret_val;
+    int32_t reg;
+    int32_t cnt;
+    uint16_t phy_data;
+
+    if (hw->kmrn_lock_loss_workaround_disabled)
+        return E1000_SUCCESS;
+
+    /* Make sure link is up before proceeding. If not just return.
+     * Attempting this while link is negotiating fouls up link
+     * stability */
+    ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+    ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+
+    if (phy_data & MII_SR_LINK_STATUS) {
+        for (cnt = 0; cnt < 10; cnt++) {
+            /* read once to clear */
+            ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+            if (ret_val)
+                return ret_val;
+            /* and again to get new status */
+            ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+            if (ret_val)
+                return ret_val;
+
+            /* check for PCS lock */
+            if (!(phy_data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
+                return E1000_SUCCESS;
+
+            /* Issue PHY reset */
+            e1000_phy_hw_reset(hw);
+            msec_delay_irq(5);
+        }
+        /* Disable GigE link negotiation */
+        reg = E1000_READ_REG(hw, PHY_CTRL);
+        E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+                        E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+
+        /* unable to acquire PCS lock */
+        return E1000_ERR_PHY;
+    }
+
+    return E1000_SUCCESS;
+}
+
+/******************************************************************************
 * Probes the expected PHY address for known PHY IDs
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-static int32_t
+int32_t
 e1000_detect_gig_phy(struct e1000_hw *hw)
 {
     int32_t phy_init_status, ret_val;
@@ -3613,8 +3904,8 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
     /* The 82571 firmware may still be configuring the PHY.  In this
      * case, we cannot access the PHY until the configuration is done.  So
      * we explicitly set the PHY values. */
-    if(hw->mac_type == e1000_82571 ||
-       hw->mac_type == e1000_82572) {
+    if (hw->mac_type == e1000_82571 ||
+        hw->mac_type == e1000_82572) {
         hw->phy_id = IGP01E1000_I_PHY_ID;
         hw->phy_type = e1000_phy_igp_2;
         return E1000_SUCCESS;
@@ -3631,7 +3922,7 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
 
     /* Read the PHY ID Registers to identify which PHY is onboard. */
     ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     hw->phy_id = (uint32_t) (phy_id_high << 16);
@@ -3669,6 +3960,12 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
     case e1000_80003es2lan:
         if (hw->phy_id == GG82563_E_PHY_ID) match = TRUE;
         break;
+    case e1000_ich8lan:
+        if (hw->phy_id == IGP03E1000_E_PHY_ID) match = TRUE;
+        if (hw->phy_id == IFE_E_PHY_ID) match = TRUE;
+        if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = TRUE;
+        if (hw->phy_id == IFE_C_E_PHY_ID) match = TRUE;
+        break;
     default:
         DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
         return -E1000_ERR_CONFIG;
@@ -3784,6 +4081,53 @@ e1000_phy_igp_get_info(struct e1000_hw *hw,
 }
 
 /******************************************************************************
+* Get PHY information from various PHY registers for ife PHY only.
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+int32_t
+e1000_phy_ife_get_info(struct e1000_hw *hw,
+                       struct e1000_phy_info *phy_info)
+{
+    int32_t ret_val;
+    uint16_t phy_data, polarity;
+
+    DEBUGFUNC("e1000_phy_ife_get_info");
+
+    phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
+    phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+    ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+    if (ret_val)
+        return ret_val;
+    phy_info->polarity_correction =
+                        (phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >>
+                        IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT;
+
+    if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) {
+        ret_val = e1000_check_polarity(hw, &polarity);
+        if (ret_val)
+            return ret_val;
+    } else {
+        /* Polarity is forced. */
+        polarity = (phy_data & IFE_PSC_FORCE_POLARITY) >>
+                       IFE_PSC_FORCE_POLARITY_SHIFT;
+    }
+    phy_info->cable_polarity = polarity;
+
+    ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+    if (ret_val)
+        return ret_val;
+
+    phy_info->mdix_mode =
+                     (phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >>
+                     IFE_PMC_MDIX_MODE_SHIFT;
+
+    return E1000_SUCCESS;
+}
+
+/******************************************************************************
 * Get PHY information from various PHY registers fot m88 PHY only.
 *
 * hw - Struct containing variables accessed by shared code
@@ -3898,9 +4242,12 @@ e1000_phy_get_info(struct e1000_hw *hw,
         return -E1000_ERR_CONFIG;
     }
 
-    if(hw->phy_type == e1000_phy_igp ||
+    if (hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
         hw->phy_type == e1000_phy_igp_2)
         return e1000_phy_igp_get_info(hw, phy_info);
+    else if (hw->phy_type == e1000_phy_ife)
+        return e1000_phy_ife_get_info(hw, phy_info);
     else
         return e1000_phy_m88_get_info(hw, phy_info);
 }
@@ -4049,6 +4396,35 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
         eeprom->use_eerd = TRUE;
         eeprom->use_eewr = FALSE;
         break;
+    case e1000_ich8lan:
+    {
+        int32_t  i = 0;
+        uint32_t flash_size = E1000_READ_ICH8_REG(hw, ICH8_FLASH_GFPREG);
+
+        eeprom->type = e1000_eeprom_ich8;
+        eeprom->use_eerd = FALSE;
+        eeprom->use_eewr = FALSE;
+        eeprom->word_size = E1000_SHADOW_RAM_WORDS;
+
+        /* Zero the shadow RAM structure. But don't load it from NVM
+         * so as to save time for driver init */
+        if (hw->eeprom_shadow_ram != NULL) {
+            for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+                hw->eeprom_shadow_ram[i].modified = FALSE;
+                hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+            }
+        }
+
+        hw->flash_base_addr = (flash_size & ICH8_GFPREG_BASE_MASK) *
+                              ICH8_FLASH_SECTOR_SIZE;
+
+        hw->flash_bank_size = ((flash_size >> 16) & ICH8_GFPREG_BASE_MASK) + 1;
+        hw->flash_bank_size -= (flash_size & ICH8_GFPREG_BASE_MASK);
+        hw->flash_bank_size *= ICH8_FLASH_SECTOR_SIZE;
+        hw->flash_bank_size /= 2 * sizeof(uint16_t);
+
+        break;
+    }
     default:
         break;
     }
@@ -4469,7 +4845,10 @@ e1000_read_eeprom(struct e1000_hw *hw,
         return ret_val;
     }
 
-    if(eeprom->type == e1000_eeprom_spi) {
+    if (eeprom->type == e1000_eeprom_ich8)
+        return e1000_read_eeprom_ich8(hw, offset, words, data);
+
+    if (eeprom->type == e1000_eeprom_spi) {
         uint16_t word_in;
         uint8_t read_opcode = EEPROM_READ_OPCODE_SPI;
 
@@ -4636,7 +5015,10 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
 
     DEBUGFUNC("e1000_is_onboard_nvm_eeprom");
 
-    if(hw->mac_type == e1000_82573) {
+    if (hw->mac_type == e1000_ich8lan)
+        return FALSE;
+
+    if (hw->mac_type == e1000_82573) {
         eecd = E1000_READ_REG(hw, EECD);
 
         /* Isolate bits 15 & 16 */
@@ -4686,8 +5068,22 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw)
         }
     }
 
-    for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
-        if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+    if (hw->mac_type == e1000_ich8lan) {
+        /* Drivers must allocate the shadow ram structure for the
+         * EEPROM checksum to be updated.  Otherwise, this bit as well
+         * as the checksum must both be set correctly for this
+         * validation to pass.
+         */
+        e1000_read_eeprom(hw, 0x19, 1, &eeprom_data);
+        if ((eeprom_data & 0x40) == 0) {
+            eeprom_data |= 0x40;
+            e1000_write_eeprom(hw, 0x19, 1, &eeprom_data);
+            e1000_update_eeprom_checksum(hw);
+        }
+    }
+
+    for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+        if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
             DEBUGOUT("EEPROM Read Error\n");
             return -E1000_ERR_EEPROM;
         }
@@ -4713,6 +5109,7 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw)
 int32_t
 e1000_update_eeprom_checksum(struct e1000_hw *hw)
 {
+    uint32_t ctrl_ext;
     uint16_t checksum = 0;
     uint16_t i, eeprom_data;
 
@@ -4731,6 +5128,14 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw)
         return -E1000_ERR_EEPROM;
     } else if (hw->eeprom.type == e1000_eeprom_flash) {
         e1000_commit_shadow_ram(hw);
+    } else if (hw->eeprom.type == e1000_eeprom_ich8) {
+        e1000_commit_shadow_ram(hw);
+        /* Reload the EEPROM, or else modifications will not appear
+         * until after next adapter reset. */
+        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+        ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+        msec_delay(10);
     }
     return E1000_SUCCESS;
 }
@@ -4770,6 +5175,9 @@ e1000_write_eeprom(struct e1000_hw *hw,
     if(eeprom->use_eewr == TRUE)
         return e1000_write_eeprom_eewr(hw, offset, words, data);
 
+    if (eeprom->type == e1000_eeprom_ich8)
+        return e1000_write_eeprom_ich8(hw, offset, words, data);
+
     /* Prepare the EEPROM for writing  */
     if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
         return -E1000_ERR_EEPROM;
@@ -4957,11 +5365,17 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
     uint32_t flop = 0;
     uint32_t i = 0;
     int32_t error = E1000_SUCCESS;
-
-    /* The flop register will be used to determine if flash type is STM */
-    flop = E1000_READ_REG(hw, FLOP);
+    uint32_t old_bank_offset = 0;
+    uint32_t new_bank_offset = 0;
+    uint32_t sector_retries = 0;
+    uint8_t low_byte = 0;
+    uint8_t high_byte = 0;
+    uint8_t temp_byte = 0;
+    boolean_t sector_write_failed = FALSE;
 
     if (hw->mac_type == e1000_82573) {
+        /* The flop register will be used to determine if flash type is STM */
+        flop = E1000_READ_REG(hw, FLOP);
         for (i=0; i < attempts; i++) {
             eecd = E1000_READ_REG(hw, EECD);
             if ((eecd & E1000_EECD_FLUPD) == 0) {
@@ -4995,6 +5409,106 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
         }
     }
 
+    if (hw->mac_type == e1000_ich8lan && hw->eeprom_shadow_ram != NULL) {
+        /* We're writing to the opposite bank so if we're on bank 1,
+         * write to bank 0 etc.  We also need to erase the segment that
+         * is going to be written */
+        if (!(E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL)) {
+            new_bank_offset = hw->flash_bank_size * 2;
+            old_bank_offset = 0;
+            e1000_erase_ich8_4k_segment(hw, 1);
+        } else {
+            old_bank_offset = hw->flash_bank_size * 2;
+            new_bank_offset = 0;
+            e1000_erase_ich8_4k_segment(hw, 0);
+        }
+
+        do {
+            sector_write_failed = FALSE;
+            /* Loop for every byte in the shadow RAM,
+             * which is in units of words. */
+            for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+                /* Determine whether to write the value stored
+                 * in the other NVM bank or a modified value stored
+                 * in the shadow RAM */
+                if (hw->eeprom_shadow_ram[i].modified == TRUE) {
+                    low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word;
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
+                                         &temp_byte);
+                    udelay(100);
+                    error = e1000_verify_write_ich8_byte(hw,
+                                                 (i << 1) + new_bank_offset,
+                                                 low_byte);
+                    if (error != E1000_SUCCESS)
+                        sector_write_failed = TRUE;
+                    high_byte =
+                        (uint8_t)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
+                                         &temp_byte);
+                    udelay(100);
+                } else {
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
+                                         &low_byte);
+                    udelay(100);
+                    error = e1000_verify_write_ich8_byte(hw,
+                                 (i << 1) + new_bank_offset, low_byte);
+                    if (error != E1000_SUCCESS)
+                        sector_write_failed = TRUE;
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
+                                         &high_byte);
+                }
+
+                /* If the word is 0x13, then make sure the signature bits
+                 * (15:14) are 11b until the commit has completed.
+                 * This will allow us to write 10b which indicates the
+                 * signature is valid.  We want to do this after the write
+                 * has completed so that we don't mark the segment valid
+                 * while the write is still in progress */
+                if (i == E1000_ICH8_NVM_SIG_WORD)
+                    high_byte = E1000_ICH8_NVM_SIG_MASK | high_byte;
+
+                error = e1000_verify_write_ich8_byte(hw,
+                             (i << 1) + new_bank_offset + 1, high_byte);
+                if (error != E1000_SUCCESS)
+                    sector_write_failed = TRUE;
+
+                if (sector_write_failed == FALSE) {
+                    /* Clear the now not used entry in the cache */
+                    hw->eeprom_shadow_ram[i].modified = FALSE;
+                    hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+                }
+            }
+
+            /* Don't bother writing the segment valid bits if sector
+             * programming failed. */
+            if (sector_write_failed == FALSE) {
+                /* Finally validate the new segment by setting bit 15:14
+                 * to 10b in word 0x13 , this can be done without an
+                 * erase as well since these bits are 11 to start with
+                 * and we need to change bit 14 to 0b */
+                e1000_read_ich8_byte(hw,
+                    E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
+                    &high_byte);
+                high_byte &= 0xBF;
+                error = e1000_verify_write_ich8_byte(hw,
+                            E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
+                            high_byte);
+                if (error != E1000_SUCCESS)
+                    sector_write_failed = TRUE;
+
+                /* And invalidate the previously valid segment by setting
+                 * its signature word (0x13) high_byte to 0b. This can be
+                 * done without an erase because flash erase sets all bits
+                 * to 1's. We can write 1's to 0's without an erase */
+                error = e1000_verify_write_ich8_byte(hw,
+                            E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset,
+                            0);
+                if (error != E1000_SUCCESS)
+                    sector_write_failed = TRUE;
+            }
+        } while (++sector_retries < 10 && sector_write_failed == TRUE);
+    }
+
     return error;
 }
 
@@ -5102,15 +5616,19 @@ e1000_init_rx_addrs(struct e1000_hw *hw)
      * the other port. */
     if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE))
         rar_num -= 1;
+    if (hw->mac_type == e1000_ich8lan)
+        rar_num = E1000_RAR_ENTRIES_ICH8LAN;
+
     /* Zero out the other 15 receive addresses. */
     DEBUGOUT("Clearing RAR[1-15]\n");
     for(i = 1; i < rar_num; i++) {
         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+        E1000_WRITE_FLUSH(hw);
         E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+        E1000_WRITE_FLUSH(hw);
     }
 }
 
-#if 0
 /******************************************************************************
  * Updates the MAC's list of multicast addresses.
  *
@@ -5145,6 +5663,8 @@ e1000_mc_addr_list_update(struct e1000_hw *hw,
     /* Clear RAR[1-15] */
     DEBUGOUT(" Clearing RAR[1-15]\n");
     num_rar_entry = E1000_RAR_ENTRIES;
+    if (hw->mac_type == e1000_ich8lan)
+        num_rar_entry = E1000_RAR_ENTRIES_ICH8LAN;
     /* Reserve a spot for the Locally Administered Address to work around
      * an 82571 issue in which a reset on one port will reload the MAC on
      * the other port. */
@@ -5153,14 +5673,19 @@ e1000_mc_addr_list_update(struct e1000_hw *hw,
 
     for(i = rar_used_count; i < num_rar_entry; i++) {
         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+        E1000_WRITE_FLUSH(hw);
         E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+        E1000_WRITE_FLUSH(hw);
     }
 
     /* Clear the MTA */
     DEBUGOUT(" Clearing MTA\n");
     num_mta_entry = E1000_NUM_MTA_REGISTERS;
+    if (hw->mac_type == e1000_ich8lan)
+        num_mta_entry = E1000_NUM_MTA_REGISTERS_ICH8LAN;
     for(i = 0; i < num_mta_entry; i++) {
         E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+        E1000_WRITE_FLUSH(hw);
     }
 
     /* Add the new addresses */
@@ -5194,7 +5719,6 @@ e1000_mc_addr_list_update(struct e1000_hw *hw,
     }
     DEBUGOUT("MC Update Complete\n");
 }
-#endif  /*  0  */
 
 /******************************************************************************
  * Hashes an address to determine its location in the multicast table
@@ -5217,24 +5741,46 @@ e1000_hash_mc_addr(struct e1000_hw *hw,
      * LSB                 MSB
      */
     case 0:
-        /* [47:36] i.e. 0x563 for above example address */
-        hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+        if (hw->mac_type == e1000_ich8lan) {
+            /* [47:38] i.e. 0x158 for above example address */
+            hash_value = ((mc_addr[4] >> 6) | (((uint16_t) mc_addr[5]) << 2));
+        } else {
+            /* [47:36] i.e. 0x563 for above example address */
+            hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+        }
         break;
     case 1:
-        /* [46:35] i.e. 0xAC6 for above example address */
-        hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5));
+        if (hw->mac_type == e1000_ich8lan) {
+            /* [46:37] i.e. 0x2B1 for above example address */
+            hash_value = ((mc_addr[4] >> 5) | (((uint16_t) mc_addr[5]) << 3));
+        } else {
+            /* [46:35] i.e. 0xAC6 for above example address */
+            hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5));
+        }
         break;
     case 2:
-        /* [45:34] i.e. 0x5D8 for above example address */
-        hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+        if (hw->mac_type == e1000_ich8lan) {
+            /*[45:36] i.e. 0x163 for above example address */
+            hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+        } else {
+            /* [45:34] i.e. 0x5D8 for above example address */
+            hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+        }
         break;
     case 3:
-        /* [43:32] i.e. 0x634 for above example address */
-        hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8));
+        if (hw->mac_type == e1000_ich8lan) {
+            /* [43:34] i.e. 0x18D for above example address */
+            hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+        } else {
+            /* [43:32] i.e. 0x634 for above example address */
+            hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8));
+        }
         break;
     }
 
     hash_value &= 0xFFF;
+    if (hw->mac_type == e1000_ich8lan)
+        hash_value &= 0x3FF;
 
     return hash_value;
 }
@@ -5262,6 +5808,8 @@ e1000_mta_set(struct e1000_hw *hw,
      * register are determined by the lower 5 bits of the value.
      */
     hash_reg = (hash_value >> 5) & 0x7F;
+    if (hw->mac_type == e1000_ich8lan)
+        hash_reg &= 0x1F;
     hash_bit = hash_value & 0x1F;
 
     mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg);
@@ -5275,9 +5823,12 @@ e1000_mta_set(struct e1000_hw *hw,
     if((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) {
         temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1));
         E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+        E1000_WRITE_FLUSH(hw);
         E1000_WRITE_REG_ARRAY(hw, MTA, (hash_reg - 1), temp);
+        E1000_WRITE_FLUSH(hw);
     } else {
         E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+        E1000_WRITE_FLUSH(hw);
     }
 }
 
@@ -5334,7 +5885,9 @@ e1000_rar_set(struct e1000_hw *hw,
     }
 
     E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+    E1000_WRITE_FLUSH(hw);
     E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+    E1000_WRITE_FLUSH(hw);
 }
 
 /******************************************************************************
@@ -5351,12 +5904,18 @@ e1000_write_vfta(struct e1000_hw *hw,
 {
     uint32_t temp;
 
-    if((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
+    if (hw->mac_type == e1000_ich8lan)
+        return;
+
+    if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
         temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
         E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+        E1000_WRITE_FLUSH(hw);
         E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
+        E1000_WRITE_FLUSH(hw);
     } else {
         E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+        E1000_WRITE_FLUSH(hw);
     }
 }
 
@@ -5373,6 +5932,9 @@ e1000_clear_vfta(struct e1000_hw *hw)
     uint32_t vfta_offset = 0;
     uint32_t vfta_bit_in_reg = 0;
 
+    if (hw->mac_type == e1000_ich8lan)
+        return;
+
     if (hw->mac_type == e1000_82573) {
         if (hw->mng_cookie.vlan_id != 0) {
             /* The VFTA is a 4096b bit-field, each identifying a single VLAN
@@ -5392,6 +5954,7 @@ e1000_clear_vfta(struct e1000_hw *hw)
          * manageability unit */
         vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
         E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+        E1000_WRITE_FLUSH(hw);
     }
 }
 
@@ -5421,9 +5984,18 @@ e1000_id_led_init(struct e1000_hw * hw)
         DEBUGOUT("EEPROM Read Error\n");
         return -E1000_ERR_EEPROM;
     }
-    if((eeprom_data== ID_LED_RESERVED_0000) ||
-       (eeprom_data == ID_LED_RESERVED_FFFF)) eeprom_data = ID_LED_DEFAULT;
-    for(i = 0; i < 4; i++) {
+
+    if ((hw->mac_type == e1000_82573) &&
+        (eeprom_data == ID_LED_RESERVED_82573))
+        eeprom_data = ID_LED_DEFAULT_82573;
+    else if ((eeprom_data == ID_LED_RESERVED_0000) ||
+            (eeprom_data == ID_LED_RESERVED_FFFF)) {
+        if (hw->mac_type == e1000_ich8lan)
+            eeprom_data = ID_LED_DEFAULT_ICH8LAN;
+        else
+            eeprom_data = ID_LED_DEFAULT;
+    }
+    for (i = 0; i < 4; i++) {
         temp = (eeprom_data >> (i << 2)) & led_mask;
         switch(temp) {
         case ID_LED_ON1_DEF2:
@@ -5519,6 +6091,44 @@ e1000_setup_led(struct e1000_hw *hw)
 }
 
 /******************************************************************************
+ * Used on 82571 and later Si that has LED blink bits.
+ * Callers must use their own timer and should have already called
+ * e1000_id_led_init()
+ * Call e1000_cleanup led() to stop blinking
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+int32_t
+e1000_blink_led_start(struct e1000_hw *hw)
+{
+    int16_t  i;
+    uint32_t ledctl_blink = 0;
+
+    DEBUGFUNC("e1000_id_led_blink_on");
+
+    if (hw->mac_type < e1000_82571) {
+        /* Nothing to do */
+        return E1000_SUCCESS;
+    }
+    if (hw->media_type == e1000_media_type_fiber) {
+        /* always blink LED0 for PCI-E fiber */
+        ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+                     (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+    } else {
+        /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */
+        ledctl_blink = hw->ledctl_mode2;
+        for (i=0; i < 4; i++)
+            if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) ==
+                E1000_LEDCTL_MODE_LED_ON)
+                ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8));
+    }
+
+    E1000_WRITE_REG(hw, LEDCTL, ledctl_blink);
+
+    return E1000_SUCCESS;
+}
+
+/******************************************************************************
  * Restores the saved state of the SW controlable LED.
  *
  * hw - Struct containing variables accessed by shared code
@@ -5548,6 +6158,10 @@ e1000_cleanup_led(struct e1000_hw *hw)
             return ret_val;
         /* Fall Through */
     default:
+        if (hw->phy_type == e1000_phy_ife) {
+            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+            break;
+        }
         /* Restore LEDCTL settings */
         E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_default);
         break;
@@ -5592,7 +6206,10 @@ e1000_led_on(struct e1000_hw *hw)
             /* Clear SW Defineable Pin 0 to turn on the LED */
             ctrl &= ~E1000_CTRL_SWDPIN0;
             ctrl |= E1000_CTRL_SWDPIO0;
-        } else if(hw->media_type == e1000_media_type_copper) {
+        } else if (hw->phy_type == e1000_phy_ife) {
+            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+                 (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
+        } else if (hw->media_type == e1000_media_type_copper) {
             E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode2);
             return E1000_SUCCESS;
         }
@@ -5640,7 +6257,10 @@ e1000_led_off(struct e1000_hw *hw)
             /* Set SW Defineable Pin 0 to turn off the LED */
             ctrl |= E1000_CTRL_SWDPIN0;
             ctrl |= E1000_CTRL_SWDPIO0;
-        } else if(hw->media_type == e1000_media_type_copper) {
+        } else if (hw->phy_type == e1000_phy_ife) {
+            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+                 (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
+        } else if (hw->media_type == e1000_media_type_copper) {
             E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode1);
             return E1000_SUCCESS;
         }
@@ -5678,12 +6298,16 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw)
     temp = E1000_READ_REG(hw, XOFFRXC);
     temp = E1000_READ_REG(hw, XOFFTXC);
     temp = E1000_READ_REG(hw, FCRUC);
+
+    if (hw->mac_type != e1000_ich8lan) {
     temp = E1000_READ_REG(hw, PRC64);
     temp = E1000_READ_REG(hw, PRC127);
     temp = E1000_READ_REG(hw, PRC255);
     temp = E1000_READ_REG(hw, PRC511);
     temp = E1000_READ_REG(hw, PRC1023);
     temp = E1000_READ_REG(hw, PRC1522);
+    }
+
     temp = E1000_READ_REG(hw, GPRC);
     temp = E1000_READ_REG(hw, BPRC);
     temp = E1000_READ_REG(hw, MPRC);
@@ -5703,12 +6327,16 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw)
     temp = E1000_READ_REG(hw, TOTH);
     temp = E1000_READ_REG(hw, TPR);
     temp = E1000_READ_REG(hw, TPT);
+
+    if (hw->mac_type != e1000_ich8lan) {
     temp = E1000_READ_REG(hw, PTC64);
     temp = E1000_READ_REG(hw, PTC127);
     temp = E1000_READ_REG(hw, PTC255);
     temp = E1000_READ_REG(hw, PTC511);
     temp = E1000_READ_REG(hw, PTC1023);
     temp = E1000_READ_REG(hw, PTC1522);
+    }
+
     temp = E1000_READ_REG(hw, MPTC);
     temp = E1000_READ_REG(hw, BPTC);
 
@@ -5731,6 +6359,9 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw)
 
     temp = E1000_READ_REG(hw, IAC);
     temp = E1000_READ_REG(hw, ICRXOC);
+
+    if (hw->mac_type == e1000_ich8lan) return;
+
     temp = E1000_READ_REG(hw, ICRXPTC);
     temp = E1000_READ_REG(hw, ICRXATC);
     temp = E1000_READ_REG(hw, ICTXPTC);
@@ -5911,6 +6542,7 @@ e1000_get_bus_info(struct e1000_hw *hw)
         hw->bus_width = e1000_bus_width_pciex_1;
         break;
     case e1000_82571:
+    case e1000_ich8lan:
     case e1000_80003es2lan:
         hw->bus_type = e1000_bus_type_pci_express;
         hw->bus_speed = e1000_bus_speed_2500;
@@ -5948,8 +6580,6 @@ e1000_get_bus_info(struct e1000_hw *hw)
         break;
     }
 }
-
-#if 0
 /******************************************************************************
  * Reads a value from one of the devices registers using port I/O (as opposed
  * memory mapped I/O). Only 82544 and newer devices support port I/O.
@@ -5967,7 +6597,6 @@ e1000_read_reg_io(struct e1000_hw *hw,
     e1000_io_write(hw, io_addr, offset);
     return e1000_io_read(hw, io_data);
 }
-#endif  /*  0  */
 
 /******************************************************************************
  * Writes a value to one of the devices registers using port I/O (as opposed to
@@ -6012,8 +6641,6 @@ e1000_get_cable_length(struct e1000_hw *hw,
 {
     int32_t ret_val;
     uint16_t agc_value = 0;
-    uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
-    uint16_t max_agc = 0;
     uint16_t i, phy_data;
     uint16_t cable_length;
 
@@ -6086,6 +6713,8 @@ e1000_get_cable_length(struct e1000_hw *hw,
             break;
         }
     } else if(hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
+        uint16_t cur_agc_value;
+        uint16_t min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
         uint16_t agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
                                                          {IGP01E1000_PHY_AGC_A,
                                                           IGP01E1000_PHY_AGC_B,
@@ -6098,23 +6727,23 @@ e1000_get_cable_length(struct e1000_hw *hw,
             if(ret_val)
                 return ret_val;
 
-            cur_agc = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
+            cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
 
-            /* Array bound check. */
-            if((cur_agc >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
-               (cur_agc == 0))
+            /* Value bound check. */
+            if ((cur_agc_value >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
+                (cur_agc_value == 0))
                 return -E1000_ERR_PHY;
 
-            agc_value += cur_agc;
+            agc_value += cur_agc_value;
 
             /* Update minimal AGC value. */
-            if(min_agc > cur_agc)
-                min_agc = cur_agc;
+            if (min_agc_value > cur_agc_value)
+                min_agc_value = cur_agc_value;
         }
 
         /* Remove the minimal AGC result for length < 50m */
-        if(agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
-            agc_value -= min_agc;
+        if (agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
+            agc_value -= min_agc_value;
 
             /* Get the average length of the remaining 3 channels */
             agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
@@ -6130,7 +6759,10 @@ e1000_get_cable_length(struct e1000_hw *hw,
                        IGP01E1000_AGC_RANGE) : 0;
         *max_length = e1000_igp_cable_length_table[agc_value] +
                       IGP01E1000_AGC_RANGE;
-    } else if (hw->phy_type == e1000_phy_igp_2) {
+    } else if (hw->phy_type == e1000_phy_igp_2 ||
+               hw->phy_type == e1000_phy_igp_3) {
+        uint16_t cur_agc_index, max_agc_index = 0;
+        uint16_t min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
         uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
                                                          {IGP02E1000_PHY_AGC_A,
                                                           IGP02E1000_PHY_AGC_B,
@@ -6145,19 +6777,27 @@ e1000_get_cable_length(struct e1000_hw *hw,
 	    /* Getting bits 15:9, which represent the combination of course and
              * fine gain values.  The result is a number that can be put into
              * the lookup table to obtain the approximate cable length. */
-            cur_agc = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
-                      IGP02E1000_AGC_LENGTH_MASK;
+            cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+                            IGP02E1000_AGC_LENGTH_MASK;
 
-            /* Remove min & max AGC values from calculation. */
-            if (e1000_igp_2_cable_length_table[min_agc] > e1000_igp_2_cable_length_table[cur_agc])
-                min_agc = cur_agc;
-	    if (e1000_igp_2_cable_length_table[max_agc] < e1000_igp_2_cable_length_table[cur_agc])
-                max_agc = cur_agc;
+            /* Array index bound check. */
+            if ((cur_agc_index >= IGP02E1000_AGC_LENGTH_TABLE_SIZE) ||
+                (cur_agc_index == 0))
+                return -E1000_ERR_PHY;
 
-            agc_value += e1000_igp_2_cable_length_table[cur_agc];
+            /* Remove min & max AGC values from calculation. */
+            if (e1000_igp_2_cable_length_table[min_agc_index] >
+                e1000_igp_2_cable_length_table[cur_agc_index])
+                min_agc_index = cur_agc_index;
+            if (e1000_igp_2_cable_length_table[max_agc_index] <
+                e1000_igp_2_cable_length_table[cur_agc_index])
+                max_agc_index = cur_agc_index;
+
+            agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
         }
 
-        agc_value -= (e1000_igp_2_cable_length_table[min_agc] + e1000_igp_2_cable_length_table[max_agc]);
+        agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+                      e1000_igp_2_cable_length_table[max_agc_index]);
         agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
 
         /* Calculate cable length with the error range of +/- 10 meters. */
@@ -6203,7 +6843,8 @@ e1000_check_polarity(struct e1000_hw *hw,
             return ret_val;
         *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >>
                     M88E1000_PSSR_REV_POLARITY_SHIFT;
-    } else if(hw->phy_type == e1000_phy_igp ||
+    } else if (hw->phy_type == e1000_phy_igp ||
+              hw->phy_type == e1000_phy_igp_3 ||
               hw->phy_type == e1000_phy_igp_2) {
         /* Read the Status register to check the speed */
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
@@ -6229,6 +6870,13 @@ e1000_check_polarity(struct e1000_hw *hw,
              * 100 Mbps this bit is always 0) */
             *polarity = phy_data & IGP01E1000_PSSR_POLARITY_REVERSED;
         }
+    } else if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL,
+                                     &phy_data);
+        if (ret_val)
+            return ret_val;
+        *polarity = (phy_data & IFE_PESC_POLARITY_REVERSED) >>
+                           IFE_PESC_POLARITY_REVERSED_SHIFT;
     }
     return E1000_SUCCESS;
 }
@@ -6256,7 +6904,8 @@ e1000_check_downshift(struct e1000_hw *hw)
 
     DEBUGFUNC("e1000_check_downshift");
 
-    if(hw->phy_type == e1000_phy_igp ||
+    if (hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
         hw->phy_type == e1000_phy_igp_2) {
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
                                      &phy_data);
@@ -6273,6 +6922,9 @@ e1000_check_downshift(struct e1000_hw *hw)
 
         hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
                                M88E1000_PSSR_DOWNSHIFT_SHIFT;
+    } else if (hw->phy_type == e1000_phy_ife) {
+        /* e1000_phy_ife supports 10/100 speed only */
+        hw->speed_downgraded = FALSE;
     }
 
     return E1000_SUCCESS;
@@ -6317,7 +6969,9 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw,
 
         if(speed == SPEED_1000) {
 
-            e1000_get_cable_length(hw, &min_length, &max_length);
+            ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+            if (ret_val)
+                return ret_val;
 
             if((hw->dsp_config_state == e1000_dsp_config_enabled) &&
                 min_length >= e1000_igp_cable_length_50) {
@@ -6525,20 +7179,27 @@ static int32_t
 e1000_set_d3_lplu_state(struct e1000_hw *hw,
                         boolean_t active)
 {
+    uint32_t phy_ctrl = 0;
     int32_t ret_val;
     uint16_t phy_data;
     DEBUGFUNC("e1000_set_d3_lplu_state");
 
-    if(hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2)
+    if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2
+        && hw->phy_type != e1000_phy_igp_3)
         return E1000_SUCCESS;
 
     /* During driver activity LPLU should not be used or it will attain link
      * from the lowest speeds starting from 10Mbps. The capability is used for
      * Dx transitions and states */
-    if(hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
+    if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
+    } else if (hw->mac_type == e1000_ich8lan) {
+        /* MAC writes into PHY register based on the state transition
+         * and start auto-negotiation. SW driver can overwrite the settings
+         * in CSR PHY power control E1000_PHY_CTRL register. */
+        phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
     } else {
         ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
         if(ret_val)
@@ -6553,11 +7214,16 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw,
             if(ret_val)
                 return ret_val;
         } else {
+            if (hw->mac_type == e1000_ich8lan) {
+                phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+                E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+            } else {
                 phy_data &= ~IGP02E1000_PM_D3_LPLU;
                 ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
                                               phy_data);
                 if (ret_val)
                     return ret_val;
+            }
         }
 
         /* LPLU and SmartSpeed are mutually exclusive.  LPLU is used during
@@ -6593,17 +7259,22 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw,
               (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
 
         if(hw->mac_type == e1000_82541_rev_2 ||
-           hw->mac_type == e1000_82547_rev_2) {
+            hw->mac_type == e1000_82547_rev_2) {
             phy_data |= IGP01E1000_GMII_FLEX_SPD;
             ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
             if(ret_val)
                 return ret_val;
         } else {
+            if (hw->mac_type == e1000_ich8lan) {
+                phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
+                E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+            } else {
                 phy_data |= IGP02E1000_PM_D3_LPLU;
                 ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
                                               phy_data);
                 if (ret_val)
                     return ret_val;
+            }
         }
 
         /* When LPLU is enabled we should disable SmartSpeed */
@@ -6638,6 +7309,7 @@ static int32_t
 e1000_set_d0_lplu_state(struct e1000_hw *hw,
                         boolean_t active)
 {
+    uint32_t phy_ctrl = 0;
     int32_t ret_val;
     uint16_t phy_data;
     DEBUGFUNC("e1000_set_d0_lplu_state");
@@ -6645,15 +7317,24 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw,
     if(hw->mac_type <= e1000_82547_rev_2)
         return E1000_SUCCESS;
 
+    if (hw->mac_type == e1000_ich8lan) {
+        phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
+    } else {
         ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
         if(ret_val)
             return ret_val;
+    }
 
     if (!active) {
+        if (hw->mac_type == e1000_ich8lan) {
+            phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
+            E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+        } else {
             phy_data &= ~IGP02E1000_PM_D0_LPLU;
             ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
             if (ret_val)
                 return ret_val;
+        }
 
         /* LPLU and SmartSpeed are mutually exclusive.  LPLU is used during
          * Dx states where the power conservation is most important.  During
@@ -6686,10 +7367,15 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw,
 
     } else {
 
+        if (hw->mac_type == e1000_ich8lan) {
+            phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
+            E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+        } else {
             phy_data |= IGP02E1000_PM_D0_LPLU;
             ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
             if (ret_val)
                 return ret_val;
+        }
 
         /* When LPLU is enabled we should disable SmartSpeed */
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
@@ -6928,8 +7614,10 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw,
 
     length >>= 2;
     /* The device driver writes the relevant command block into the ram area. */
-    for (i = 0; i < length; i++)
+    for (i = 0; i < length; i++) {
         E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((uint32_t *) hdr + i));
+        E1000_WRITE_FLUSH(hw);
+    }
 
     return E1000_SUCCESS;
 }
@@ -6961,15 +7649,18 @@ e1000_mng_write_commit(
  * returns  - TRUE when the mode is IAMT or FALSE.
  ****************************************************************************/
 boolean_t
-e1000_check_mng_mode(
-    struct e1000_hw *hw)
+e1000_check_mng_mode(struct e1000_hw *hw)
 {
     uint32_t fwsm;
 
     fwsm = E1000_READ_REG(hw, FWSM);
 
-    if((fwsm & E1000_FWSM_MODE_MASK) ==
-        (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+    if (hw->mac_type == e1000_ich8lan) {
+        if ((fwsm & E1000_FWSM_MODE_MASK) ==
+            (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+            return TRUE;
+    } else if ((fwsm & E1000_FWSM_MODE_MASK) ==
+               (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
         return TRUE;
 
     return FALSE;
@@ -7209,7 +7900,6 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw)
     E1000_WRITE_REG(hw, CTRL, ctrl);
 }
 
-#if 0
 /***************************************************************************
  *
  * Enables PCI-Express master access.
@@ -7233,7 +7923,6 @@ e1000_enable_pciex_master(struct e1000_hw *hw)
     ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE;
     E1000_WRITE_REG(hw, CTRL, ctrl);
 }
-#endif  /*  0  */
 
 /*******************************************************************************
  *
@@ -7299,8 +7988,10 @@ e1000_get_auto_rd_done(struct e1000_hw *hw)
     case e1000_82572:
     case e1000_82573:
     case e1000_80003es2lan:
-        while(timeout) {
-            if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break;
+    case e1000_ich8lan:
+        while (timeout) {
+            if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD)
+                break;
             else msec_delay(1);
             timeout--;
         }
@@ -7340,7 +8031,7 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw)
 
     switch (hw->mac_type) {
     default:
-        msec_delay(10);
+        msec_delay_irq(10);
         break;
     case e1000_80003es2lan:
         /* Separate *_CFG_DONE_* bit for each port */
@@ -7523,6 +8214,13 @@ int32_t
 e1000_check_phy_reset_block(struct e1000_hw *hw)
 {
     uint32_t manc = 0;
+    uint32_t fwsm = 0;
+
+    if (hw->mac_type == e1000_ich8lan) {
+        fwsm = E1000_READ_REG(hw, FWSM);
+        return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS
+                                            : E1000_BLK_PHY_RESET;
+    }
 
     if (hw->mac_type > e1000_82547_rev_2)
         manc = E1000_READ_REG(hw, MANC);
@@ -7549,6 +8247,8 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw)
         if((fwsm & E1000_FWSM_MODE_MASK) != 0)
             return TRUE;
         break;
+    case e1000_ich8lan:
+        return TRUE;
     default:
         break;
     }
@@ -7556,4 +8256,846 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw)
 }
 
 
+/******************************************************************************
+ * Configure PCI-Ex no-snoop
+ *
+ * hw - Struct containing variables accessed by shared code.
+ * no_snoop - Bitmap of no-snoop events.
+ *
+ * returns: E1000_SUCCESS
+ *
+ *****************************************************************************/
+int32_t
+e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
+{
+    uint32_t gcr_reg = 0;
+
+    DEBUGFUNC("e1000_set_pci_ex_no_snoop");
+
+    if (hw->bus_type == e1000_bus_type_unknown)
+        e1000_get_bus_info(hw);
+
+    if (hw->bus_type != e1000_bus_type_pci_express)
+        return E1000_SUCCESS;
+
+    if (no_snoop) {
+        gcr_reg = E1000_READ_REG(hw, GCR);
+        gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL);
+        gcr_reg |= no_snoop;
+        E1000_WRITE_REG(hw, GCR, gcr_reg);
+    }
+    if (hw->mac_type == e1000_ich8lan) {
+        uint32_t ctrl_ext;
+
+        E1000_WRITE_REG(hw, GCR, PCI_EX_82566_SNOOP_ALL);
+
+        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+        ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+    }
+
+    return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Get software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_get_software_flag(struct e1000_hw *hw)
+{
+    int32_t timeout = PHY_CFG_TIMEOUT;
+    uint32_t extcnf_ctrl;
+
+    DEBUGFUNC("e1000_get_software_flag");
+
+    if (hw->mac_type == e1000_ich8lan) {
+        while (timeout) {
+            extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+            extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+            E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
+
+            extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+            if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+                break;
+            msec_delay_irq(1);
+            timeout--;
+        }
+
+        if (!timeout) {
+            DEBUGOUT("FW or HW locks the resource too long.\n");
+            return -E1000_ERR_CONFIG;
+        }
+    }
+
+    return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Release software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+void
+e1000_release_software_flag(struct e1000_hw *hw)
+{
+    uint32_t extcnf_ctrl;
+
+    DEBUGFUNC("e1000_release_software_flag");
+
+    if (hw->mac_type == e1000_ich8lan) {
+        extcnf_ctrl= E1000_READ_REG(hw, EXTCNF_CTRL);
+        extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+        E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
+    }
+
+    return;
+}
+
+/***************************************************************************
+ *
+ * Disable dynamic power down mode in ife PHY.
+ * It can be used to workaround band-gap problem.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw)
+{
+    uint16_t phy_data;
+    int32_t ret_val = E1000_SUCCESS;
+
+    DEBUGFUNC("e1000_ife_disable_dynamic_power_down");
+
+    if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+        if (ret_val)
+            return ret_val;
+
+        phy_data |=  IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN;
+        ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data);
+    }
+
+    return ret_val;
+}
+
+/***************************************************************************
+ *
+ * Enable dynamic power down mode in ife PHY.
+ * It can be used to workaround band-gap problem.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw)
+{
+    uint16_t phy_data;
+    int32_t ret_val = E1000_SUCCESS;
+
+    DEBUGFUNC("e1000_ife_enable_dynamic_power_down");
+
+    if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+        if (ret_val)
+            return ret_val;
+
+        phy_data &=  ~IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN;
+        ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data);
+    }
+
+    return ret_val;
+}
+
+/******************************************************************************
+ * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access
+ * register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+int32_t
+e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
+                       uint16_t *data)
+{
+    int32_t  error = E1000_SUCCESS;
+    uint32_t flash_bank = 0;
+    uint32_t act_offset = 0;
+    uint32_t bank_offset = 0;
+    uint16_t word = 0;
+    uint16_t i = 0;
+
+    /* We need to know which is the valid flash bank.  In the event
+     * that we didn't allocate eeprom_shadow_ram, we may not be
+     * managing flash_bank.  So it cannot be trusted and needs
+     * to be updated with each read.
+     */
+    /* Value of bit 22 corresponds to the flash bank we're on. */
+    flash_bank = (E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL) ? 1 : 0;
+
+    /* Adjust offset appropriately if we're on bank 1 - adjust for word size */
+    bank_offset = flash_bank * (hw->flash_bank_size * 2);
+
+    error = e1000_get_software_flag(hw);
+    if (error != E1000_SUCCESS)
+        return error;
+
+    for (i = 0; i < words; i++) {
+        if (hw->eeprom_shadow_ram != NULL &&
+            hw->eeprom_shadow_ram[offset+i].modified == TRUE) {
+            data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word;
+        } else {
+            /* The NVM part needs a byte offset, hence * 2 */
+            act_offset = bank_offset + ((offset + i) * 2);
+            error = e1000_read_ich8_word(hw, act_offset, &word);
+            if (error != E1000_SUCCESS)
+                break;
+            data[i] = word;
+        }
+    }
+
+    e1000_release_software_flag(hw);
+
+    return error;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word or words to the EEPROM using the ICH8's flash access
+ * register.  Actually, writes are written to the shadow ram cache in the hw
+ * structure hw->e1000_shadow_ram.  e1000_commit_shadow_ram flushes this to
+ * the NVM, which occurs when the NVM checksum is updated.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to write
+ * words - number of words to write
+ * data - words to write to the EEPROM
+ *****************************************************************************/
+int32_t
+e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
+                        uint16_t *data)
+{
+    uint32_t i = 0;
+    int32_t error = E1000_SUCCESS;
+
+    error = e1000_get_software_flag(hw);
+    if (error != E1000_SUCCESS)
+        return error;
+
+    /* A driver can write to the NVM only if it has eeprom_shadow_ram
+     * allocated.  Subsequent reads to the modified words are read from
+     * this cached structure as well.  Writes will only go into this
+     * cached structure unless it's followed by a call to
+     * e1000_update_eeprom_checksum() where it will commit the changes
+     * and clear the "modified" field.
+     */
+    if (hw->eeprom_shadow_ram != NULL) {
+        for (i = 0; i < words; i++) {
+            if ((offset + i) < E1000_SHADOW_RAM_WORDS) {
+                hw->eeprom_shadow_ram[offset+i].modified = TRUE;
+                hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i];
+            } else {
+                error = -E1000_ERR_EEPROM;
+                break;
+            }
+        }
+    } else {
+        /* Drivers have the option to not allocate eeprom_shadow_ram as long
+         * as they don't perform any NVM writes.  An attempt in doing so
+         * will result in this error.
+         */
+        error = -E1000_ERR_EEPROM;
+    }
+
+    e1000_release_software_flag(hw);
+
+    return error;
+}
+
+/******************************************************************************
+ * This function does initial flash setup so that a new read/write/erase cycle
+ * can be started.
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+int32_t
+e1000_ich8_cycle_init(struct e1000_hw *hw)
+{
+    union ich8_hws_flash_status hsfsts;
+    int32_t error = E1000_ERR_EEPROM;
+    int32_t i     = 0;
+
+    DEBUGFUNC("e1000_ich8_cycle_init");
+
+    hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+
+    /* May be check the Flash Des Valid bit in Hw status */
+    if (hsfsts.hsf_status.fldesvalid == 0) {
+        DEBUGOUT("Flash descriptor invalid.  SW Sequencing must be used.");
+        return error;
+    }
+
+    /* Clear FCERR in Hw status by writing 1 */
+    /* Clear DAEL in Hw status by writing a 1 */
+    hsfsts.hsf_status.flcerr = 1;
+    hsfsts.hsf_status.dael = 1;
+
+    E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+
+    /* Either we should have a hardware SPI cycle in progress bit to check
+     * against, in order to start a new cycle or FDONE bit should be changed
+     * in the hardware so that it is 1 after harware reset, which can then be
+     * used as an indication whether a cycle is in progress or has been
+     * completed .. we should also have some software semaphore mechanism to
+     * guard FDONE or the cycle in progress bit so that two threads access to
+     * those bits can be sequentiallized or a way so that 2 threads dont
+     * start the cycle at the same time */
+
+    if (hsfsts.hsf_status.flcinprog == 0) {
+        /* There is no cycle running at present, so we can start a cycle */
+        /* Begin by setting Flash Cycle Done. */
+        hsfsts.hsf_status.flcdone = 1;
+        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+        error = E1000_SUCCESS;
+    } else {
+        /* otherwise poll for sometime so the current cycle has a chance
+         * to end before giving up. */
+        for (i = 0; i < ICH8_FLASH_COMMAND_TIMEOUT; i++) {
+            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+            if (hsfsts.hsf_status.flcinprog == 0) {
+                error = E1000_SUCCESS;
+                break;
+            }
+            udelay(1);
+        }
+        if (error == E1000_SUCCESS) {
+            /* Successful in waiting for previous cycle to timeout,
+             * now set the Flash Cycle Done. */
+            hsfsts.hsf_status.flcdone = 1;
+            E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+        } else {
+            DEBUGOUT("Flash controller busy, cannot get access");
+        }
+    }
+    return error;
+}
+
+/******************************************************************************
+ * This function starts a flash cycle and waits for its completion
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+int32_t
+e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
+{
+    union ich8_hws_flash_ctrl hsflctl;
+    union ich8_hws_flash_status hsfsts;
+    int32_t error = E1000_ERR_EEPROM;
+    uint32_t i = 0;
+
+    /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
+    hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+    hsflctl.hsf_ctrl.flcgo = 1;
+    E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+    /* wait till FDONE bit is set to 1 */
+    do {
+        hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+        if (hsfsts.hsf_status.flcdone == 1)
+            break;
+        udelay(1);
+        i++;
+    } while (i < timeout);
+    if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) {
+        error = E1000_SUCCESS;
+    }
+    return error;
+}
+
+/******************************************************************************
+ * Reads a byte or word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte or word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - Pointer to the word to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
+                     uint32_t size, uint16_t* data)
+{
+    union ich8_hws_flash_status hsfsts;
+    union ich8_hws_flash_ctrl hsflctl;
+    uint32_t flash_linear_address;
+    uint32_t flash_data = 0;
+    int32_t error = -E1000_ERR_EEPROM;
+    int32_t count = 0;
+
+    DEBUGFUNC("e1000_read_ich8_data");
+
+    if (size < 1  || size > 2 || data == 0x0 ||
+        index > ICH8_FLASH_LINEAR_ADDR_MASK)
+        return error;
+
+    flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) +
+                           hw->flash_base_addr;
+
+    do {
+        udelay(1);
+        /* Steps */
+        error = e1000_ich8_cycle_init(hw);
+        if (error != E1000_SUCCESS)
+            break;
+
+        hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+        /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+        hsflctl.hsf_ctrl.fldbcount = size - 1;
+        hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_READ;
+        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+        /* Write the last 24 bits of index into Flash Linear address field in
+         * Flash Address */
+        /* TODO: TBD maybe check the index against the size of flash */
+
+        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+
+        error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT);
+
+        /* Check if FCERR is set to 1, if set to 1, clear it and try the whole
+         * sequence a few more times, else read in (shift in) the Flash Data0,
+         * the order is least significant byte first msb to lsb */
+        if (error == E1000_SUCCESS) {
+            flash_data = E1000_READ_ICH8_REG(hw, ICH8_FLASH_FDATA0);
+            if (size == 1) {
+                *data = (uint8_t)(flash_data & 0x000000FF);
+            } else if (size == 2) {
+                *data = (uint16_t)(flash_data & 0x0000FFFF);
+            }
+            break;
+        } else {
+            /* If we've gotten here, then things are probably completely hosed,
+             * but if the error condition is detected, it won't hurt to give
+             * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times.
+             */
+            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+            if (hsfsts.hsf_status.flcerr == 1) {
+                /* Repeat for some time before giving up. */
+                continue;
+            } else if (hsfsts.hsf_status.flcdone == 0) {
+                DEBUGOUT("Timeout error - flash cycle did not complete.");
+                break;
+            }
+        }
+    } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT);
+
+    return error;
+}
+
+/******************************************************************************
+ * Writes One /two bytes to the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte/word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - The byte(s) to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
+                      uint16_t data)
+{
+    union ich8_hws_flash_status hsfsts;
+    union ich8_hws_flash_ctrl hsflctl;
+    uint32_t flash_linear_address;
+    uint32_t flash_data = 0;
+    int32_t error = -E1000_ERR_EEPROM;
+    int32_t count = 0;
+
+    DEBUGFUNC("e1000_write_ich8_data");
+
+    if (size < 1  || size > 2 || data > size * 0xff ||
+        index > ICH8_FLASH_LINEAR_ADDR_MASK)
+        return error;
+
+    flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) +
+                           hw->flash_base_addr;
+
+    do {
+        udelay(1);
+        /* Steps */
+        error = e1000_ich8_cycle_init(hw);
+        if (error != E1000_SUCCESS)
+            break;
+
+        hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+        /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+        hsflctl.hsf_ctrl.fldbcount = size -1;
+        hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_WRITE;
+        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+        /* Write the last 24 bits of index into Flash Linear address field in
+         * Flash Address */
+        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+
+        if (size == 1)
+            flash_data = (uint32_t)data & 0x00FF;
+        else
+            flash_data = (uint32_t)data;
+
+        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FDATA0, flash_data);
+
+        /* check if FCERR is set to 1 , if set to 1, clear it and try the whole
+         * sequence a few more times else done */
+        error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT);
+        if (error == E1000_SUCCESS) {
+            break;
+        } else {
+            /* If we're here, then things are most likely completely hosed,
+             * but if the error condition is detected, it won't hurt to give
+             * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times.
+             */
+            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+            if (hsfsts.hsf_status.flcerr == 1) {
+                /* Repeat for some time before giving up. */
+                continue;
+            } else if (hsfsts.hsf_status.flcdone == 0) {
+                DEBUGOUT("Timeout error - flash cycle did not complete.");
+                break;
+            }
+        }
+    } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT);
+
+    return error;
+}
+
+/******************************************************************************
+ * Reads a single byte from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - Pointer to a byte to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
+{
+    int32_t status = E1000_SUCCESS;
+    uint16_t word = 0;
+
+    status = e1000_read_ich8_data(hw, index, 1, &word);
+    if (status == E1000_SUCCESS) {
+        *data = (uint8_t)word;
+    }
+
+    return status;
+}
+
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ * Performs verification by reading back the value and then going through
+ * a retry algorithm before giving up.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to write.
+ * byte - The byte to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
+{
+    int32_t error = E1000_SUCCESS;
+    int32_t program_retries;
+    uint8_t temp_byte;
+
+    e1000_write_ich8_byte(hw, index, byte);
+    udelay(100);
+
+    for (program_retries = 0; program_retries < 100; program_retries++) {
+        e1000_read_ich8_byte(hw, index, &temp_byte);
+        if (temp_byte == byte)
+            break;
+        udelay(10);
+        e1000_write_ich8_byte(hw, index, byte);
+        udelay(100);
+    }
+    if (program_retries == 100)
+        error = E1000_ERR_EEPROM;
+
+    return error;
+}
+
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - The byte to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
+{
+    int32_t status = E1000_SUCCESS;
+    uint16_t word = (uint16_t)data;
+
+    status = e1000_write_ich8_data(hw, index, 1, word);
+
+    return status;
+}
+
+/******************************************************************************
+ * Reads a word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The starting byte index of the word to read.
+ * data - Pointer to a word to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
+{
+    int32_t status = E1000_SUCCESS;
+    status = e1000_read_ich8_data(hw, index, 2, data);
+    return status;
+}
+
+/******************************************************************************
+ * Writes a word to the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The starting byte index of the word to read.
+ * data - The word to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data)
+{
+    int32_t status = E1000_SUCCESS;
+    status = e1000_write_ich8_data(hw, index, 2, data);
+    return status;
+}
+
+/******************************************************************************
+ * Erases the bank specified. Each bank is a 4k block. Segments are 0 based.
+ * segment N is 4096 * N + flash_reg_addr.
+ *
+ * hw - pointer to e1000_hw structure
+ * segment - 0 for first segment, 1 for second segment, etc.
+ *****************************************************************************/
+int32_t
+e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment)
+{
+    union ich8_hws_flash_status hsfsts;
+    union ich8_hws_flash_ctrl hsflctl;
+    uint32_t flash_linear_address;
+    int32_t  count = 0;
+    int32_t  error = E1000_ERR_EEPROM;
+    int32_t  iteration, seg_size;
+    int32_t  sector_size;
+    int32_t  j = 0;
+    int32_t  error_flag = 0;
+
+    hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+
+    /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */
+    /* 00: The Hw sector is 256 bytes, hence we need to erase 16
+     *     consecutive sectors.  The start index for the nth Hw sector can be
+     *     calculated as = segment * 4096 + n * 256
+     * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
+     *     The start index for the nth Hw sector can be calculated
+     *     as = segment * 4096
+     * 10: Error condition
+     * 11: The Hw sector size is much bigger than the size asked to
+     *     erase...error condition */
+    if (hsfsts.hsf_status.berasesz == 0x0) {
+        /* Hw sector size 256 */
+        sector_size = seg_size = ICH8_FLASH_SEG_SIZE_256;
+        iteration = ICH8_FLASH_SECTOR_SIZE / ICH8_FLASH_SEG_SIZE_256;
+    } else if (hsfsts.hsf_status.berasesz == 0x1) {
+        sector_size = seg_size = ICH8_FLASH_SEG_SIZE_4K;
+        iteration = 1;
+    } else if (hsfsts.hsf_status.berasesz == 0x3) {
+        sector_size = seg_size = ICH8_FLASH_SEG_SIZE_64K;
+        iteration = 1;
+    } else {
+        return error;
+    }
+
+    for (j = 0; j < iteration ; j++) {
+        do {
+            count++;
+            /* Steps */
+            error = e1000_ich8_cycle_init(hw);
+            if (error != E1000_SUCCESS) {
+                error_flag = 1;
+                break;
+            }
+
+            /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash
+             * Control */
+            hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+            hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_ERASE;
+            E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+            /* Write the last 24 bits of an index within the block into Flash
+             * Linear address field in Flash Address.  This probably needs to
+             * be calculated here based off the on-chip segment size and the
+             * software segment size assumed (4K) */
+            /* TBD */
+            flash_linear_address = segment * sector_size + j * seg_size;
+            flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK;
+            flash_linear_address += hw->flash_base_addr;
+
+            E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+
+            error = e1000_ich8_flash_cycle(hw, 1000000);
+            /* Check if FCERR is set to 1.  If 1, clear it and try the whole
+             * sequence a few more times else Done */
+            if (error == E1000_SUCCESS) {
+                break;
+            } else {
+                hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+                if (hsfsts.hsf_status.flcerr == 1) {
+                    /* repeat for some time before giving up */
+                    continue;
+                } else if (hsfsts.hsf_status.flcdone == 0) {
+                    error_flag = 1;
+                    break;
+                }
+            }
+        } while ((count < ICH8_FLASH_CYCLE_REPEAT_COUNT) && !error_flag);
+        if (error_flag == 1)
+            break;
+    }
+    if (error_flag != 1)
+        error = E1000_SUCCESS;
+    return error;
+}
+
+/******************************************************************************
+ *
+ * Reverse duplex setting without breaking the link.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ *****************************************************************************/
+int32_t
+e1000_duplex_reversal(struct e1000_hw *hw)
+{
+    int32_t ret_val;
+    uint16_t phy_data;
+
+    if (hw->phy_type != e1000_phy_igp_3)
+        return E1000_SUCCESS;
+
+    ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+    if (ret_val)
+        return ret_val;
+
+    phy_data ^= MII_CR_FULL_DUPLEX;
+
+    ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+    if (ret_val)
+        return ret_val;
+
+    ret_val = e1000_read_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, &phy_data);
+    if (ret_val)
+        return ret_val;
+
+    phy_data |= IGP3_PHY_MISC_DUPLEX_MANUAL_SET;
+    ret_val = e1000_write_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, phy_data);
+
+    return ret_val;
+}
+
+int32_t
+e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
+                                      uint32_t cnf_base_addr, uint32_t cnf_size)
+{
+    uint32_t ret_val = E1000_SUCCESS;
+    uint16_t word_addr, reg_data, reg_addr;
+    uint16_t i;
+
+    /* cnf_base_addr is in DWORD */
+    word_addr = (uint16_t)(cnf_base_addr << 1);
+
+    /* cnf_size is returned in size of dwords */
+    for (i = 0; i < cnf_size; i++) {
+        ret_val = e1000_read_eeprom(hw, (word_addr + i*2), 1, &reg_data);
+        if (ret_val)
+            return ret_val;
+
+        ret_val = e1000_read_eeprom(hw, (word_addr + i*2 + 1), 1, &reg_addr);
+        if (ret_val)
+            return ret_val;
+
+        ret_val = e1000_get_software_flag(hw);
+        if (ret_val != E1000_SUCCESS)
+            return ret_val;
+
+        ret_val = e1000_write_phy_reg_ex(hw, (uint32_t)reg_addr, reg_data);
+
+        e1000_release_software_flag(hw);
+    }
+
+    return ret_val;
+}
+
+
+int32_t
+e1000_init_lcd_from_nvm(struct e1000_hw *hw)
+{
+    uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop;
+
+    if (hw->phy_type != e1000_phy_igp_3)
+          return E1000_SUCCESS;
+
+    /* Check if SW needs configure the PHY */
+    reg_data = E1000_READ_REG(hw, FEXTNVM);
+    if (!(reg_data & FEXTNVM_SW_CONFIG))
+        return E1000_SUCCESS;
+
+    /* Wait for basic configuration completes before proceeding*/
+    loop = 0;
+    do {
+        reg_data = E1000_READ_REG(hw, STATUS) & E1000_STATUS_LAN_INIT_DONE;
+        udelay(100);
+        loop++;
+    } while ((!reg_data) && (loop < 50));
+
+    /* Clear the Init Done bit for the next init event */
+    reg_data = E1000_READ_REG(hw, STATUS);
+    reg_data &= ~E1000_STATUS_LAN_INIT_DONE;
+    E1000_WRITE_REG(hw, STATUS, reg_data);
+
+    /* Make sure HW does not configure LCD from PHY extended configuration
+       before SW configuration */
+    reg_data = E1000_READ_REG(hw, EXTCNF_CTRL);
+    if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) {
+        reg_data = E1000_READ_REG(hw, EXTCNF_SIZE);
+        cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH;
+        cnf_size >>= 16;
+        if (cnf_size) {
+            reg_data = E1000_READ_REG(hw, EXTCNF_CTRL);
+            cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER;
+            /* cnf_base_addr is in DWORD */
+            cnf_base_addr >>= 16;
+
+            /* Configure LCD from extended configuration region. */
+            ret_val = e1000_init_lcd_from_nvm_config_region(hw, cnf_base_addr,
+                                                            cnf_size);
+            if (ret_val)
+                return ret_val;
+        }
+    }
+
+    return E1000_SUCCESS;
+}
+
+
 
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 467c9ed..f9341e3 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -62,6 +62,7 @@ typedef enum {
     e1000_82572,
     e1000_82573,
     e1000_80003es2lan,
+    e1000_ich8lan,
     e1000_num_macs
 } e1000_mac_type;
 
@@ -70,6 +71,7 @@ typedef enum {
     e1000_eeprom_spi,
     e1000_eeprom_microwire,
     e1000_eeprom_flash,
+    e1000_eeprom_ich8,
     e1000_eeprom_none, /* No NVM support */
     e1000_num_eeprom_types
 } e1000_eeprom_type;
@@ -98,6 +100,11 @@ typedef enum {
     e1000_fc_default = 0xFF
 } e1000_fc_type;
 
+struct e1000_shadow_ram {
+    uint16_t    eeprom_word;
+    boolean_t   modified;
+};
+
 /* PCI bus types */
 typedef enum {
     e1000_bus_type_unknown = 0,
@@ -218,6 +225,8 @@ typedef enum {
     e1000_phy_igp,
     e1000_phy_igp_2,
     e1000_phy_gg82563,
+    e1000_phy_igp_3,
+    e1000_phy_ife,
     e1000_phy_undefined = 0xFF
 } e1000_phy_type;
 
@@ -313,6 +322,10 @@ int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy
 int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
 int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
 int32_t e1000_phy_reset(struct e1000_hw *hw);
+void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
+int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
+int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size);
+int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
 int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
 int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
 int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data);
@@ -331,6 +344,7 @@ uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw);
 #define E1000_MNG_DHCP_COOKIE_OFFSET	0x6F0   /* Cookie offset */
 #define E1000_MNG_DHCP_COOKIE_LENGTH	0x10    /* Cookie length */
 #define E1000_MNG_IAMT_MODE		0x3
+#define E1000_MNG_ICH_IAMT_MODE         0x2
 #define E1000_IAMT_SIGNATURE            0x544D4149 /* Intel(R) Active Management Technology signature */
 
 #define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
@@ -388,6 +402,8 @@ int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num);
 int32_t e1000_read_mac_addr(struct e1000_hw * hw);
 int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
 void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);
+void e1000_release_software_flag(struct e1000_hw *hw);
+int32_t e1000_get_software_flag(struct e1000_hw *hw);
 
 /* Filters (multicast, vlan, receive) */
 void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count);
@@ -401,6 +417,7 @@ int32_t e1000_setup_led(struct e1000_hw *hw);
 int32_t e1000_cleanup_led(struct e1000_hw *hw);
 int32_t e1000_led_on(struct e1000_hw *hw);
 int32_t e1000_led_off(struct e1000_hw *hw);
+int32_t e1000_blink_led_start(struct e1000_hw *hw);
 
 /* Adaptive IFS Functions */
 
@@ -422,6 +439,29 @@ int32_t e1000_disable_pciex_master(struct e1000_hw *hw);
 int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
 void e1000_release_software_semaphore(struct e1000_hw *hw);
 int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
+int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop);
+
+int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index,
+                             uint8_t *data);
+int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
+                                     uint8_t byte);
+int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
+                              uint8_t byte);
+int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index,
+                             uint16_t *data);
+int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
+                             uint32_t size, uint16_t *data);
+int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+                               uint16_t words, uint16_t *data);
+int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+                                uint16_t words, uint16_t *data);
+int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment);
+
+
+#define E1000_READ_REG_IO(a, reg) \
+    e1000_read_reg_io((a), E1000_##reg)
+#define E1000_WRITE_REG_IO(a, reg, val) \
+    e1000_write_reg_io((a), E1000_##reg, val)
 
 /* PCI Device IDs */
 #define E1000_DEV_ID_82542               0x1000
@@ -446,6 +486,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
 #define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
 #define E1000_DEV_ID_82541EI             0x1013
 #define E1000_DEV_ID_82541EI_MOBILE      0x1018
+#define E1000_DEV_ID_82541ER_LOM         0x1014
 #define E1000_DEV_ID_82541ER             0x1078
 #define E1000_DEV_ID_82547GI             0x1075
 #define E1000_DEV_ID_82541GI             0x1076
@@ -457,18 +498,28 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
 #define E1000_DEV_ID_82546GB_PCIE        0x108A
 #define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
 #define E1000_DEV_ID_82547EI             0x1019
+#define E1000_DEV_ID_82547EI_MOBILE      0x101A
 #define E1000_DEV_ID_82571EB_COPPER      0x105E
 #define E1000_DEV_ID_82571EB_FIBER       0x105F
 #define E1000_DEV_ID_82571EB_SERDES      0x1060
 #define E1000_DEV_ID_82572EI_COPPER      0x107D
 #define E1000_DEV_ID_82572EI_FIBER       0x107E
 #define E1000_DEV_ID_82572EI_SERDES      0x107F
+#define E1000_DEV_ID_82572EI             0x10B9
 #define E1000_DEV_ID_82573E              0x108B
 #define E1000_DEV_ID_82573E_IAMT         0x108C
 #define E1000_DEV_ID_82573L              0x109A
 #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
 #define E1000_DEV_ID_80003ES2LAN_COPPER_DPT     0x1096
 #define E1000_DEV_ID_80003ES2LAN_SERDES_DPT     0x1098
+#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT     0x10BA
+#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT     0x10BB
+
+#define E1000_DEV_ID_ICH8_IGP_M_AMT      0x1049
+#define E1000_DEV_ID_ICH8_IGP_AMT        0x104A
+#define E1000_DEV_ID_ICH8_IGP_C          0x104B
+#define E1000_DEV_ID_ICH8_IFE            0x104C
+#define E1000_DEV_ID_ICH8_IGP_M          0x104D
 
 
 #define NODE_ADDRESS_SIZE 6
@@ -539,6 +590,14 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
     E1000_IMS_RXSEQ  |    \
     E1000_IMS_LSC)
 
+/* Additional interrupts need to be handled for e1000_ich8lan:
+    DSW = The FW changed the status of the DISSW bit in FWSM
+    PHYINT = The LAN connected device generates an interrupt
+    EPRST = Manageability reset event */
+#define IMS_ICH8LAN_ENABLE_MASK (\
+    E1000_IMS_DSW   | \
+    E1000_IMS_PHYINT | \
+    E1000_IMS_EPRST)
 
 /* Number of high/low register pairs in the RAR. The RAR (Receive Address
  * Registers) holds the directed and multicast addresses that we monitor. We
@@ -546,6 +605,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
  * E1000_RAR_ENTRIES - 1 multicast addresses.
  */
 #define E1000_RAR_ENTRIES 15
+#define E1000_RAR_ENTRIES_ICH8LAN  7
 
 #define MIN_NUMBER_OF_DESCRIPTORS 8
 #define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
@@ -767,6 +827,9 @@ struct e1000_data_desc {
 #define E1000_MC_TBL_SIZE          128  /* Multicast Filter Table (4096 bits) */
 #define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */
 
+#define E1000_NUM_UNICAST_ICH8LAN  7
+#define E1000_MC_TBL_SIZE_ICH8LAN  32
+
 
 /* Receive Address Register */
 struct e1000_rar {
@@ -776,6 +839,7 @@ struct e1000_rar {
 
 /* Number of entries in the Multicast Table Array (MTA). */
 #define E1000_NUM_MTA_REGISTERS 128
+#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32
 
 /* IPv4 Address Table Entry */
 struct e1000_ipv4_at_entry {
@@ -786,6 +850,7 @@ struct e1000_ipv4_at_entry {
 /* Four wakeup IP addresses are supported */
 #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
 #define E1000_IP4AT_SIZE                  E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
+#define E1000_IP4AT_SIZE_ICH8LAN          3
 #define E1000_IP6AT_SIZE                  1
 
 /* IPv6 Address Table Entry */
@@ -844,6 +909,7 @@ struct e1000_ffvt_entry {
 #define E1000_FLA      0x0001C  /* Flash Access - RW */
 #define E1000_MDIC     0x00020  /* MDI Control - RW */
 #define E1000_SCTL     0x00024  /* SerDes Control - RW */
+#define E1000_FEXTNVM  0x00028  /* Future Extended NVM register */
 #define E1000_FCAL     0x00028  /* Flow Control Address Low - RW */
 #define E1000_FCAH     0x0002C  /* Flow Control Address High -RW */
 #define E1000_FCT      0x00030  /* Flow Control Type - RW */
@@ -872,6 +938,8 @@ struct e1000_ffvt_entry {
 #define E1000_LEDCTL   0x00E00  /* LED Control - RW */
 #define E1000_EXTCNF_CTRL  0x00F00  /* Extended Configuration Control */
 #define E1000_EXTCNF_SIZE  0x00F08  /* Extended Configuration Size */
+#define E1000_PHY_CTRL     0x00F10  /* PHY Control Register in CSR */
+#define FEXTNVM_SW_CONFIG  0x0001
 #define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
 #define E1000_PBS      0x01008  /* Packet Buffer Size */
 #define E1000_EEMNGCTL 0x01010  /* MNG EEprom Control */
@@ -899,11 +967,13 @@ struct e1000_ffvt_entry {
 #define E1000_RDH0     E1000_RDH   /* RX Desc Head (0) - RW */
 #define E1000_RDT0     E1000_RDT   /* RX Desc Tail (0) - RW */
 #define E1000_RDTR0    E1000_RDTR  /* RX Delay Timer (0) - RW */
-#define E1000_RXDCTL   0x02828  /* RX Descriptor Control - RW */
+#define E1000_RXDCTL   0x02828  /* RX Descriptor Control queue 0 - RW */
+#define E1000_RXDCTL1  0x02928  /* RX Descriptor Control queue 1 - RW */
 #define E1000_RADV     0x0282C  /* RX Interrupt Absolute Delay Timer - RW */
 #define E1000_RSRPD    0x02C00  /* RX Small Packet Detect - RW */
 #define E1000_RAID     0x02C08  /* Receive Ack Interrupt Delay - RW */
 #define E1000_TXDMAC   0x03000  /* TX DMA Control - RW */
+#define E1000_KABGTXD  0x03004  /* AFE Band Gap Transmit Ref Data */
 #define E1000_TDFH     0x03410  /* TX Data FIFO Head - RW */
 #define E1000_TDFT     0x03418  /* TX Data FIFO Tail - RW */
 #define E1000_TDFHS    0x03420  /* TX Data FIFO Head Saved - RW */
@@ -1050,6 +1120,7 @@ struct e1000_ffvt_entry {
 #define E1000_82542_FLA      E1000_FLA
 #define E1000_82542_MDIC     E1000_MDIC
 #define E1000_82542_SCTL     E1000_SCTL
+#define E1000_82542_FEXTNVM  E1000_FEXTNVM
 #define E1000_82542_FCAL     E1000_FCAL
 #define E1000_82542_FCAH     E1000_FCAH
 #define E1000_82542_FCT      E1000_FCT
@@ -1073,6 +1144,19 @@ struct e1000_ffvt_entry {
 #define E1000_82542_RDLEN0   E1000_82542_RDLEN
 #define E1000_82542_RDH0     E1000_82542_RDH
 #define E1000_82542_RDT0     E1000_82542_RDT
+#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
+                                                       * RX Control - RW */
+#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
+#define E1000_82542_RDBAH3   0x02B04 /* RX Desc Base High Queue 3 - RW */
+#define E1000_82542_RDBAL3   0x02B00 /* RX Desc Low Queue 3 - RW */
+#define E1000_82542_RDLEN3   0x02B08 /* RX Desc Length Queue 3 - RW */
+#define E1000_82542_RDH3     0x02B10 /* RX Desc Head Queue 3 - RW */
+#define E1000_82542_RDT3     0x02B18 /* RX Desc Tail Queue 3 - RW */
+#define E1000_82542_RDBAL2   0x02A00 /* RX Desc Base Low Queue 2 - RW */
+#define E1000_82542_RDBAH2   0x02A04 /* RX Desc Base High Queue 2 - RW */
+#define E1000_82542_RDLEN2   0x02A08 /* RX Desc Length Queue 2 - RW */
+#define E1000_82542_RDH2     0x02A10 /* RX Desc Head Queue 2 - RW */
+#define E1000_82542_RDT2     0x02A18 /* RX Desc Tail Queue 2 - RW */
 #define E1000_82542_RDTR1    0x00130
 #define E1000_82542_RDBAL1   0x00138
 #define E1000_82542_RDBAH1   0x0013C
@@ -1110,11 +1194,14 @@ struct e1000_ffvt_entry {
 #define E1000_82542_FLOP     E1000_FLOP
 #define E1000_82542_EXTCNF_CTRL  E1000_EXTCNF_CTRL
 #define E1000_82542_EXTCNF_SIZE  E1000_EXTCNF_SIZE
+#define E1000_82542_PHY_CTRL E1000_PHY_CTRL
 #define E1000_82542_ERT      E1000_ERT
 #define E1000_82542_RXDCTL   E1000_RXDCTL
+#define E1000_82542_RXDCTL1  E1000_RXDCTL1
 #define E1000_82542_RADV     E1000_RADV
 #define E1000_82542_RSRPD    E1000_RSRPD
 #define E1000_82542_TXDMAC   E1000_TXDMAC
+#define E1000_82542_KABGTXD  E1000_KABGTXD
 #define E1000_82542_TDFHS    E1000_TDFHS
 #define E1000_82542_TDFTS    E1000_TDFTS
 #define E1000_82542_TDFPC    E1000_TDFPC
@@ -1310,13 +1397,16 @@ struct e1000_hw_stats {
 
 /* Structure containing variables used by the shared code (e1000_hw.c) */
 struct e1000_hw {
-    uint8_t __iomem *hw_addr;
+    uint8_t *hw_addr;
     uint8_t *flash_address;
     e1000_mac_type mac_type;
     e1000_phy_type phy_type;
     uint32_t phy_init_script;
     e1000_media_type media_type;
     void *back;
+    struct e1000_shadow_ram *eeprom_shadow_ram;
+    uint32_t flash_bank_size;
+    uint32_t flash_base_addr;
     e1000_fc_type fc;
     e1000_bus_speed bus_speed;
     e1000_bus_width bus_width;
@@ -1328,6 +1418,7 @@ struct e1000_hw {
     uint32_t asf_firmware_present;
     uint32_t eeprom_semaphore_present;
     uint32_t swfw_sync_present;
+    uint32_t swfwhw_semaphore_present;
     unsigned long io_base;
     uint32_t phy_id;
     uint32_t phy_revision;
@@ -1387,6 +1478,7 @@ struct e1000_hw {
     boolean_t in_ifs_mode;
     boolean_t mng_reg_access_disabled;
     boolean_t leave_av_bit_off;
+    boolean_t kmrn_lock_loss_workaround_disabled;
 };
 
 
@@ -1435,6 +1527,7 @@ struct e1000_hw {
 #define E1000_CTRL_RTE      0x20000000  /* Routing tag enable */
 #define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */
 #define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000  /* Initiate an interrupt to manageability engine */
 
 /* Device Status */
 #define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
@@ -1449,6 +1542,8 @@ struct e1000_hw {
 #define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
 #define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
 #define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion
+                                                   by EEPROM/Flash */
 #define E1000_STATUS_ASDV       0x00000300      /* Auto speed detect value */
 #define E1000_STATUS_DOCK_CI    0x00000800      /* Change in Dock/Undock state. Clear on write '0'. */
 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
@@ -1506,6 +1601,10 @@ struct e1000_hw {
 #define E1000_STM_OPCODE     0xDB00
 #define E1000_HICR_FW_RESET  0xC0
 
+#define E1000_SHADOW_RAM_WORDS     2048
+#define E1000_ICH8_NVM_SIG_WORD    0x13
+#define E1000_ICH8_NVM_SIG_MASK    0xC0
+
 /* EEPROM Read */
 #define E1000_EERD_START      0x00000001 /* Start Read */
 #define E1000_EERD_DONE       0x00000010 /* Read Done */
@@ -1551,7 +1650,6 @@ struct e1000_hw {
 #define E1000_CTRL_EXT_WR_WMARK_320   0x01000000
 #define E1000_CTRL_EXT_WR_WMARK_384   0x02000000
 #define E1000_CTRL_EXT_WR_WMARK_448   0x03000000
-#define E1000_CTRL_EXT_CANC           0x04000000  /* Interrupt delay cancellation */
 #define E1000_CTRL_EXT_DRV_LOAD       0x10000000  /* Driver loaded bit for FW */
 #define E1000_CTRL_EXT_IAME           0x08000000  /* Interrupt acknowledge Auto-mask */
 #define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000  /* Clear Interrupt timers after IMS clear */
@@ -1591,12 +1689,31 @@ struct e1000_hw {
 #define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS   0x00000800
 
 /* In-Band Control */
+#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT    0x00000500
 #define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING  0x00000010
 
 /* Half-Duplex Control */
 #define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
 #define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT  0x00000000
 
+#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL       0x0000001E
+
+#define E1000_KUMCTRLSTA_DIAG_FELPBK           0x2000
+#define E1000_KUMCTRLSTA_DIAG_NELPBK           0x1000
+
+#define E1000_KUMCTRLSTA_K0S_100_EN            0x2000
+#define E1000_KUMCTRLSTA_K0S_GBE_EN            0x1000
+#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK   0x0003
+
+#define E1000_KABGTXD_BGSQLBIAS                0x00050000
+
+#define E1000_PHY_CTRL_SPD_EN                  0x00000001
+#define E1000_PHY_CTRL_D0A_LPLU                0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU             0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE      0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE             0x00000040
+#define E1000_PHY_CTRL_B2B_EN                  0x00000080
+
 /* LED Control */
 #define E1000_LEDCTL_LED0_MODE_MASK       0x0000000F
 #define E1000_LEDCTL_LED0_MODE_SHIFT      0
@@ -1666,6 +1783,9 @@ struct e1000_hw {
 #define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
 #define E1000_ICR_ALL_PARITY    0x03F00000 /* all parity error bits */
+#define E1000_ICR_DSW           0x00000020 /* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_PHYINT        0x00001000 /* LAN connected device generates an interrupt */
+#define E1000_ICR_EPRST         0x00100000 /* ME handware reset occurs */
 
 /* Interrupt Cause Set */
 #define E1000_ICS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
@@ -1692,6 +1812,9 @@ struct e1000_hw {
 #define E1000_ICS_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
 #define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICS_DSW       E1000_ICR_DSW
+#define E1000_ICS_PHYINT    E1000_ICR_PHYINT
+#define E1000_ICS_EPRST     E1000_ICR_EPRST
 
 /* Interrupt Mask Set */
 #define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
@@ -1718,6 +1841,9 @@ struct e1000_hw {
 #define E1000_IMS_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
 #define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMS_DSW       E1000_ICR_DSW
+#define E1000_IMS_PHYINT    E1000_ICR_PHYINT
+#define E1000_IMS_EPRST     E1000_ICR_EPRST
 
 /* Interrupt Mask Clear */
 #define E1000_IMC_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
@@ -1744,6 +1870,9 @@ struct e1000_hw {
 #define E1000_IMC_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
 #define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMC_DSW       E1000_ICR_DSW
+#define E1000_IMC_PHYINT    E1000_ICR_PHYINT
+#define E1000_IMC_EPRST     E1000_ICR_EPRST
 
 /* Receive Control */
 #define E1000_RCTL_RST            0x00000001    /* Software reset */
@@ -1918,9 +2047,10 @@ struct e1000_hw {
 #define E1000_MRQC_RSS_FIELD_MASK           0xFFFF0000
 #define E1000_MRQC_RSS_FIELD_IPV4_TCP       0x00010000
 #define E1000_MRQC_RSS_FIELD_IPV4           0x00020000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP       0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX    0x00040000
 #define E1000_MRQC_RSS_FIELD_IPV6_EX        0x00080000
 #define E1000_MRQC_RSS_FIELD_IPV6           0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP       0x00200000
 
 /* Definitions for power management and wakeup registers */
 /* Wake Up Control */
@@ -2010,6 +2140,15 @@ struct e1000_hw {
 #define E1000_FWSM_MODE_SHIFT            1
 #define E1000_FWSM_FW_VALID     0x00008000 /* FW established a valid mode */
 
+#define E1000_FWSM_RSPCIPHY        0x00000040 /* Reset PHY on PCI reset */
+#define E1000_FWSM_DISSW           0x10000000 /* FW disable SW Write Access */
+#define E1000_FWSM_SKUSEL_MASK     0x60000000 /* LAN SKU select */
+#define E1000_FWSM_SKUEL_SHIFT     29
+#define E1000_FWSM_SKUSEL_EMB      0x0 /* Embedded SKU */
+#define E1000_FWSM_SKUSEL_CONS     0x1 /* Consumer SKU */
+#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
+#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
+
 /* FFLT Debug Register */
 #define E1000_FFLT_DBG_INVC     0x00100000 /* Invalid /C/ code handling */
 
@@ -2082,6 +2221,8 @@ struct e1000_host_command_info {
                              E1000_GCR_TXDSCW_NO_SNOOP      | \
                              E1000_GCR_TXDSCR_NO_SNOOP)
 
+#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
+
 #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
 /* Function Active and Power State to MNG */
 #define E1000_FACTPS_FUNC0_POWER_STATE_MASK         0x00000003
@@ -2140,8 +2281,10 @@ struct e1000_host_command_info {
 #define EEPROM_PHY_CLASS_WORD         0x0007
 #define EEPROM_INIT_CONTROL1_REG      0x000A
 #define EEPROM_INIT_CONTROL2_REG      0x000F
+#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
 #define EEPROM_INIT_CONTROL3_PORT_B   0x0014
 #define EEPROM_INIT_3GIO_3            0x001A
+#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
 #define EEPROM_INIT_CONTROL3_PORT_A   0x0024
 #define EEPROM_CFG                    0x0012
 #define EEPROM_FLASH_VERSION          0x0032
@@ -2153,10 +2296,16 @@ struct e1000_host_command_info {
 /* Word definitions for ID LED Settings */
 #define ID_LED_RESERVED_0000 0x0000
 #define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_RESERVED_82573  0xF746
+#define ID_LED_DEFAULT_82573   0x1811
 #define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2 << 12) | \
                               (ID_LED_OFF1_OFF2 << 8) | \
                               (ID_LED_DEF1_DEF2 << 4) | \
                               (ID_LED_DEF1_DEF2))
+#define ID_LED_DEFAULT_ICH8LAN  ((ID_LED_DEF1_DEF2 << 12) | \
+                                 (ID_LED_DEF1_OFF2 <<  8) | \
+                                 (ID_LED_DEF1_ON2  <<  4) | \
+                                 (ID_LED_DEF1_DEF2))
 #define ID_LED_DEF1_DEF2     0x1
 #define ID_LED_DEF1_ON2      0x2
 #define ID_LED_DEF1_OFF2     0x3
@@ -2191,6 +2340,11 @@ struct e1000_host_command_info {
 #define EEPROM_WORD0F_ASM_DIR    0x2000
 #define EEPROM_WORD0F_ANE        0x0800
 #define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
+#define EEPROM_WORD0F_LPLU       0x0001
+
+/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
+#define EEPROM_WORD1020_GIGA_DISABLE         0x0010
+#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
 
 /* Mask bits for fields in Word 0x1a of the EEPROM */
 #define EEPROM_WORD1A_ASPM_MASK  0x000C
@@ -2265,23 +2419,29 @@ struct e1000_host_command_info {
 #define E1000_EXTCNF_CTRL_D_UD_OWNER        0x00000010
 #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
 #define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
-#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER   0x1FFF0000
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER   0x0FFF0000
 
 #define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH    0x000000FF
 #define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH   0x0000FF00
 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH   0x00FF0000
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE  0x00000001
+#define E1000_EXTCNF_CTRL_SWFLAG            0x00000020
 
 /* PBA constants */
+#define E1000_PBA_8K 0x0008    /* 8KB, default Rx allocation */
 #define E1000_PBA_12K 0x000C    /* 12KB, default Rx allocation */
 #define E1000_PBA_16K 0x0010    /* 16KB, default TX allocation */
 #define E1000_PBA_22K 0x0016
 #define E1000_PBA_24K 0x0018
 #define E1000_PBA_30K 0x001E
 #define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
 #define E1000_PBA_38K 0x0026
 #define E1000_PBA_40K 0x0028
 #define E1000_PBA_48K 0x0030    /* 48KB, default RX allocation */
 
+#define E1000_PBS_16K E1000_PBA_16K
+
 /* Flow Control Constants */
 #define FLOW_CONTROL_ADDRESS_LOW  0x00C28001
 #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
@@ -2336,7 +2496,7 @@ struct e1000_host_command_info {
 /* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
 #define AUTO_READ_DONE_TIMEOUT      10
 /* Number of milliseconds we wait for PHY configuration done after MAC reset */
-#define PHY_CFG_TIMEOUT             40
+#define PHY_CFG_TIMEOUT             100
 
 #define E1000_TX_BUFFER_SIZE ((uint32_t)1514)
 
@@ -2764,6 +2924,17 @@ struct e1000_host_command_info {
 #define M88E1000_EPSCR_TX_CLK_25      0x0070 /* 25  MHz TX_CLK */
 #define M88E1000_EPSCR_TX_CLK_0       0x0000 /* NO  TX_CLK */
 
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X    0x0000
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X    0x0200
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X    0x0400
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X    0x0600
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X    0x0800
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X    0x0A00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X    0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X    0x0E00
+
 /* IGP01E1000 Specific Port Config Register - R/W */
 #define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT  0x0010
 #define IGP01E1000_PSCFR_PRE_EN                0x0020
@@ -2990,6 +3161,221 @@ struct e1000_host_command_info {
 #define L1LXT971A_PHY_ID   0x001378E0
 #define GG82563_E_PHY_ID   0x01410CA0
 
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define PHY_PAGE_SHIFT        5
+#define PHY_REG(page, reg)    \
+        (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+
+#define IGP3_PHY_PORT_CTRL           \
+        PHY_REG(769, 17) /* Port General Configuration */
+#define IGP3_PHY_RATE_ADAPT_CTRL \
+        PHY_REG(769, 25) /* Rate Adapter Control Register */
+
+#define IGP3_KMRN_FIFO_CTRL_STATS \
+        PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+#define IGP3_KMRN_POWER_MNG_CTRL \
+        PHY_REG(770, 17) /* KMRN Power Management Control Register */
+#define IGP3_KMRN_INBAND_CTRL \
+        PHY_REG(770, 18) /* KMRN Inband Control Register */
+#define IGP3_KMRN_DIAG \
+        PHY_REG(770, 19) /* KMRN Diagnostic register */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
+#define IGP3_KMRN_ACK_TIMEOUT \
+        PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+
+#define IGP3_VR_CTRL \
+        PHY_REG(776, 18) /* Voltage regulator control register */
+#define IGP3_VR_CTRL_MODE_SHUT       0x0200 /* Enter powerdown, shutdown VRs */
+
+#define IGP3_CAPABILITY \
+        PHY_REG(776, 19) /* IGP3 Capability Register */
+
+/* Capabilities for SKU Control  */
+#define IGP3_CAP_INITIATE_TEAM       0x0001 /* Able to initiate a team */
+#define IGP3_CAP_WFM                 0x0002 /* Support WoL and PXE */
+#define IGP3_CAP_ASF                 0x0004 /* Support ASF */
+#define IGP3_CAP_LPLU                0x0008 /* Support Low Power Link Up */
+#define IGP3_CAP_DC_AUTO_SPEED       0x0010 /* Support AC/DC Auto Link Speed */
+#define IGP3_CAP_SPD                 0x0020 /* Support Smart Power Down */
+#define IGP3_CAP_MULT_QUEUE          0x0040 /* Support 2 tx & 2 rx queues */
+#define IGP3_CAP_RSS                 0x0080 /* Support RSS */
+#define IGP3_CAP_8021PQ              0x0100 /* Support 802.1Q & 802.1p */
+#define IGP3_CAP_AMT_CB              0x0200 /* Support active manageability and circuit breaker */
+
+#define IGP3_PPC_JORDAN_EN           0x0001
+#define IGP3_PPC_JORDAN_GIGA_SPEED   0x0002
+
+#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS         0x0001
+#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK   0x001E
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA        0x0020
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_100         0x0040
+
+#define IGP3E1000_PHY_MISC_CTRL                0x1B   /* Misc. Ctrl register */
+#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET        0x1000 /* Duplex Manual Set */
+
+#define IGP3_KMRN_EXT_CTRL  PHY_REG(770, 18)
+#define IGP3_KMRN_EC_DIS_INBAND    0x0080
+
+#define IGP03E1000_E_PHY_ID  0x02A80390
+#define IFE_E_PHY_ID         0x02A80330 /* 10/100 PHY */
+#define IFE_PLUS_E_PHY_ID    0x02A80320
+#define IFE_C_E_PHY_ID       0x02A80310
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL   0x10  /* 100BaseTx Extended Status, Control and Address */
+#define IFE_PHY_SPECIAL_CONTROL           0x11  /* 100BaseTx PHY special control register */
+#define IFE_PHY_RCV_FALSE_CARRIER         0x13  /* 100BaseTx Receive False Carrier Counter */
+#define IFE_PHY_RCV_DISCONNECT            0x14  /* 100BaseTx Receive Disconnet Counter */
+#define IFE_PHY_RCV_ERROT_FRAME           0x15  /* 100BaseTx Receive Error Frame Counter */
+#define IFE_PHY_RCV_SYMBOL_ERR            0x16  /* Receive Symbol Error Counter */
+#define IFE_PHY_PREM_EOF_ERR              0x17  /* 100BaseTx Receive Premature End Of Frame Error Counter */
+#define IFE_PHY_RCV_EOF_ERR               0x18  /* 10BaseT Receive End Of Frame Error Counter */
+#define IFE_PHY_TX_JABBER_DETECT          0x19  /* 10BaseT Transmit Jabber Detect Counter */
+#define IFE_PHY_EQUALIZER                 0x1A  /* PHY Equalizer Control and Status */
+#define IFE_PHY_SPECIAL_CONTROL_LED       0x1B  /* PHY special control and LED configuration */
+#define IFE_PHY_MDIX_CONTROL              0x1C  /* MDI/MDI-X Control register */
+#define IFE_PHY_HWI_CONTROL               0x1D  /* Hardware Integrity Control (HWI) */
+
+#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE  0x2000  /* Defaut 1 = Disable auto reduced power down */
+#define IFE_PESC_100BTX_POWER_DOWN           0x0400  /* Indicates the power state of 100BASE-TX */
+#define IFE_PESC_10BTX_POWER_DOWN            0x0200  /* Indicates the power state of 10BASE-T */
+#define IFE_PESC_POLARITY_REVERSED           0x0100  /* Indicates 10BASE-T polarity */
+#define IFE_PESC_PHY_ADDR_MASK               0x007C  /* Bit 6:2 for sampled PHY address */
+#define IFE_PESC_SPEED                       0x0002  /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
+#define IFE_PESC_DUPLEX                      0x0001  /* Auto-negotiation duplex result 1=Full, 0=Half */
+#define IFE_PESC_POLARITY_REVERSED_SHIFT     8
+
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN   0x0100  /* 1 = Dyanmic Power Down disabled */
+#define IFE_PSC_FORCE_POLARITY               0x0020  /* 1=Reversed Polarity, 0=Normal */
+#define IFE_PSC_AUTO_POLARITY_DISABLE        0x0010  /* 1=Auto Polarity Disabled, 0=Enabled */
+#define IFE_PSC_JABBER_FUNC_DISABLE          0x0001  /* 1=Jabber Disabled, 0=Normal Jabber Operation */
+#define IFE_PSC_FORCE_POLARITY_SHIFT         5
+#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT  4
+
+#define IFE_PMC_AUTO_MDIX                    0x0080  /* 1=enable MDI/MDI-X feature, default 0=disabled */
+#define IFE_PMC_FORCE_MDIX                   0x0040  /* 1=force MDIX-X, 0=force MDI */
+#define IFE_PMC_MDIX_STATUS                  0x0020  /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_AUTO_MDIX_COMPLETE           0x0010  /* Resolution algorthm is completed */
+#define IFE_PMC_MDIX_MODE_SHIFT              6
+#define IFE_PHC_MDIX_RESET_ALL_MASK          0x0000  /* Disable auto MDI-X */
+
+#define IFE_PHC_HWI_ENABLE                   0x8000  /* Enable the HWI feature */
+#define IFE_PHC_ABILITY_CHECK                0x4000  /* 1= Test Passed, 0=failed */
+#define IFE_PHC_TEST_EXEC                    0x2000  /* PHY launch test pulses on the wire */
+#define IFE_PHC_HIGHZ                        0x0200  /* 1 = Open Circuit */
+#define IFE_PHC_LOWZ                         0x0400  /* 1 = Short Circuit */
+#define IFE_PHC_LOW_HIGH_Z_MASK              0x0600  /* Mask for indication type of problem on the line */
+#define IFE_PHC_DISTANCE_MASK                0x01FF  /* Mask for distance to the cable problem, in 80cm granularity */
+#define IFE_PHC_RESET_ALL_MASK               0x0000  /* Disable HWI */
+#define IFE_PSCL_PROBE_MODE                  0x0020  /* LED Probe mode */
+#define IFE_PSCL_PROBE_LEDS_OFF              0x0006  /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON               0x0007  /* Force LEDs 0 and 2 on */
+
+#define ICH8_FLASH_COMMAND_TIMEOUT           500   /* 500 ms , should be adjusted */
+#define ICH8_FLASH_CYCLE_REPEAT_COUNT        10    /* 10 cycles , should be adjusted */
+#define ICH8_FLASH_SEG_SIZE_256              256
+#define ICH8_FLASH_SEG_SIZE_4K               4096
+#define ICH8_FLASH_SEG_SIZE_64K              65536
+
+#define ICH8_CYCLE_READ                      0x0
+#define ICH8_CYCLE_RESERVED                  0x1
+#define ICH8_CYCLE_WRITE                     0x2
+#define ICH8_CYCLE_ERASE                     0x3
+
+#define ICH8_FLASH_GFPREG   0x0000
+#define ICH8_FLASH_HSFSTS   0x0004
+#define ICH8_FLASH_HSFCTL   0x0006
+#define ICH8_FLASH_FADDR    0x0008
+#define ICH8_FLASH_FDATA0   0x0010
+#define ICH8_FLASH_FRACC    0x0050
+#define ICH8_FLASH_FREG0    0x0054
+#define ICH8_FLASH_FREG1    0x0058
+#define ICH8_FLASH_FREG2    0x005C
+#define ICH8_FLASH_FREG3    0x0060
+#define ICH8_FLASH_FPR0     0x0074
+#define ICH8_FLASH_FPR1     0x0078
+#define ICH8_FLASH_SSFSTS   0x0090
+#define ICH8_FLASH_SSFCTL   0x0092
+#define ICH8_FLASH_PREOP    0x0094
+#define ICH8_FLASH_OPTYPE   0x0096
+#define ICH8_FLASH_OPMENU   0x0098
+
+#define ICH8_FLASH_REG_MAPSIZE      0x00A0
+#define ICH8_FLASH_SECTOR_SIZE      4096
+#define ICH8_GFPREG_BASE_MASK       0x1FFF
+#define ICH8_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+
+/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
+/* Offset 04h HSFSTS */
+union ich8_hws_flash_status {
+    struct ich8_hsfsts {
+#ifdef E1000_BIG_ENDIAN
+        uint16_t reserved2      :6;
+        uint16_t fldesvalid     :1;
+        uint16_t flockdn        :1;
+        uint16_t flcdone        :1;
+        uint16_t flcerr         :1;
+        uint16_t dael           :1;
+        uint16_t berasesz       :2;
+        uint16_t flcinprog      :1;
+        uint16_t reserved1      :2;
+#else
+        uint16_t flcdone        :1;   /* bit 0 Flash Cycle Done */
+        uint16_t flcerr         :1;   /* bit 1 Flash Cycle Error */
+        uint16_t dael           :1;   /* bit 2 Direct Access error Log */
+        uint16_t berasesz       :2;   /* bit 4:3 Block/Sector Erase Size */
+        uint16_t flcinprog      :1;   /* bit 5 flash SPI cycle in Progress */
+        uint16_t reserved1      :2;   /* bit 13:6 Reserved */
+        uint16_t reserved2      :6;   /* bit 13:6 Reserved */
+        uint16_t fldesvalid     :1;   /* bit 14 Flash Descriptor Valid */
+        uint16_t flockdn        :1;   /* bit 15 Flash Configuration Lock-Down */
+#endif
+    } hsf_status;
+    uint16_t regval;
+};
+
+/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */
+/* Offset 06h FLCTL */
+union ich8_hws_flash_ctrl {
+    struct ich8_hsflctl {
+#ifdef E1000_BIG_ENDIAN
+        uint16_t fldbcount      :2;
+        uint16_t flockdn        :6;
+        uint16_t flcgo          :1;
+        uint16_t flcycle        :2;
+        uint16_t reserved       :5;
+#else
+        uint16_t flcgo          :1;   /* 0 Flash Cycle Go */
+        uint16_t flcycle        :2;   /* 2:1 Flash Cycle */
+        uint16_t reserved       :5;   /* 7:3 Reserved  */
+        uint16_t fldbcount      :2;   /* 9:8 Flash Data Byte Count */
+        uint16_t flockdn        :6;   /* 15:10 Reserved */
+#endif
+    } hsf_ctrl;
+    uint16_t regval;
+};
+
+/* ICH8 Flash Region Access Permissions */
+union ich8_hws_flash_regacc {
+    struct ich8_flracc {
+#ifdef E1000_BIG_ENDIAN
+        uint32_t gmwag          :8;
+        uint32_t gmrag          :8;
+        uint32_t grwa           :8;
+        uint32_t grra           :8;
+#else
+        uint32_t grra           :8;   /* 0:7 GbE region Read Access */
+        uint32_t grwa           :8;   /* 8:15 GbE region Write Access */
+        uint32_t gmrag          :8;   /* 23:16 GbE Master Read Access Grant  */
+        uint32_t gmwag          :8;   /* 31:24 GbE Master Write Access Grant */
+#endif
+    } hsf_flregacc;
+    uint16_t regval;
+};
+
 /* Miscellaneous PHY bit definitions. */
 #define PHY_PREAMBLE        0xFFFFFFFF
 #define PHY_SOF             0x01
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index f77624f..6d3d419 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -36,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
 #else
 #define DRIVERNAPI "-NAPI"
 #endif
-#define DRV_VERSION "7.0.38-k4"DRIVERNAPI
+#define DRV_VERSION "7.1.9-k2"DRIVERNAPI
 char e1000_driver_version[] = DRV_VERSION;
 static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -73,6 +73,11 @@ static struct pci_device_id e1000_pci_tbl[] = {
 	INTEL_E1000_ETHERNET_DEVICE(0x1026),
 	INTEL_E1000_ETHERNET_DEVICE(0x1027),
 	INTEL_E1000_ETHERNET_DEVICE(0x1028),
+	INTEL_E1000_ETHERNET_DEVICE(0x1049),
+	INTEL_E1000_ETHERNET_DEVICE(0x104A),
+	INTEL_E1000_ETHERNET_DEVICE(0x104B),
+	INTEL_E1000_ETHERNET_DEVICE(0x104C),
+	INTEL_E1000_ETHERNET_DEVICE(0x104D),
 	INTEL_E1000_ETHERNET_DEVICE(0x105E),
 	INTEL_E1000_ETHERNET_DEVICE(0x105F),
 	INTEL_E1000_ETHERNET_DEVICE(0x1060),
@@ -96,6 +101,8 @@ static struct pci_device_id e1000_pci_tbl[] = {
 	INTEL_E1000_ETHERNET_DEVICE(0x109A),
 	INTEL_E1000_ETHERNET_DEVICE(0x10B5),
 	INTEL_E1000_ETHERNET_DEVICE(0x10B9),
+	INTEL_E1000_ETHERNET_DEVICE(0x10BA),
+	INTEL_E1000_ETHERNET_DEVICE(0x10BB),
 	/* required last entry */
 	{0,}
 };
@@ -133,7 +140,6 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
 static void e1000_set_multi(struct net_device *netdev);
 static void e1000_update_phy_info(unsigned long data);
 static void e1000_watchdog(unsigned long data);
-static void e1000_watchdog_task(struct e1000_adapter *adapter);
 static void e1000_82547_tx_fifo_stall(unsigned long data);
 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
 static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
@@ -178,8 +184,8 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 static void e1000_restore_vlan(struct e1000_adapter *adapter);
 
-#ifdef CONFIG_PM
 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
+#ifdef CONFIG_PM
 static int e1000_resume(struct pci_dev *pdev);
 #endif
 static void e1000_shutdown(struct pci_dev *pdev);
@@ -206,8 +212,8 @@ static struct pci_driver e1000_driver = {
 	.probe    = e1000_probe,
 	.remove   = __devexit_p(e1000_remove),
 	/* Power Managment Hooks */
-#ifdef CONFIG_PM
 	.suspend  = e1000_suspend,
+#ifdef CONFIG_PM
 	.resume   = e1000_resume,
 #endif
 	.shutdown = e1000_shutdown,
@@ -261,6 +267,44 @@ e1000_exit_module(void)
 
 module_exit(e1000_exit_module);
 
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int flags, err = 0;
+
+	flags = IRQF_SHARED;
+#ifdef CONFIG_PCI_MSI
+	if (adapter->hw.mac_type > e1000_82547_rev_2) {
+		adapter->have_msi = TRUE;
+		if ((err = pci_enable_msi(adapter->pdev))) {
+			DPRINTK(PROBE, ERR,
+			 "Unable to allocate MSI interrupt Error: %d\n", err);
+			adapter->have_msi = FALSE;
+		}
+	}
+	if (adapter->have_msi)
+		flags &= ~IRQF_SHARED;
+#endif
+	if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
+	                       netdev->name, netdev)))
+		DPRINTK(PROBE, ERR,
+		        "Unable to allocate interrupt Error: %d\n", err);
+
+	return err;
+}
+
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	free_irq(adapter->pdev->irq, netdev);
+
+#ifdef CONFIG_PCI_MSI
+	if (adapter->have_msi)
+		pci_disable_msi(adapter->pdev);
+#endif
+}
+
 /**
  * e1000_irq_disable - Mask off interrupt generation on the NIC
  * @adapter: board private structure
@@ -329,6 +373,7 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
 {
 	uint32_t ctrl_ext;
 	uint32_t swsm;
+	uint32_t extcnf;
 
 	/* Let firmware taken over control of h/w */
 	switch (adapter->hw.mac_type) {
@@ -343,6 +388,11 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
 		swsm = E1000_READ_REG(&adapter->hw, SWSM);
 		E1000_WRITE_REG(&adapter->hw, SWSM,
 				swsm & ~E1000_SWSM_DRV_LOAD);
+	case e1000_ich8lan:
+		extcnf = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+		E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+				extcnf & ~E1000_CTRL_EXT_DRV_LOAD);
+		break;
 	default:
 		break;
 	}
@@ -364,6 +414,7 @@ e1000_get_hw_control(struct e1000_adapter *adapter)
 {
 	uint32_t ctrl_ext;
 	uint32_t swsm;
+	uint32_t extcnf;
 	/* Let firmware know the driver has taken over */
 	switch (adapter->hw.mac_type) {
 	case e1000_82571:
@@ -378,6 +429,11 @@ e1000_get_hw_control(struct e1000_adapter *adapter)
 		E1000_WRITE_REG(&adapter->hw, SWSM,
 				swsm | E1000_SWSM_DRV_LOAD);
 		break;
+	case e1000_ich8lan:
+		extcnf = E1000_READ_REG(&adapter->hw, EXTCNF_CTRL);
+		E1000_WRITE_REG(&adapter->hw, EXTCNF_CTRL,
+				extcnf | E1000_EXTCNF_CTRL_SWFLAG);
+		break;
 	default:
 		break;
 	}
@@ -387,18 +443,10 @@ int
 e1000_up(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	int i, err;
+	int i;
 
 	/* hardware has been reset, we need to reload some things */
 
-	/* Reset the PHY if it was previously powered down */
-	if (adapter->hw.media_type == e1000_media_type_copper) {
-		uint16_t mii_reg;
-		e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
-		if (mii_reg & MII_CR_POWER_DOWN)
-			e1000_phy_hw_reset(&adapter->hw);
-	}
-
 	e1000_set_multi(netdev);
 
 	e1000_restore_vlan(adapter);
@@ -415,24 +463,6 @@ e1000_up(struct e1000_adapter *adapter)
 		                      E1000_DESC_UNUSED(ring));
 	}
 
-#ifdef CONFIG_PCI_MSI
-	if (adapter->hw.mac_type > e1000_82547_rev_2) {
-		adapter->have_msi = TRUE;
-		if ((err = pci_enable_msi(adapter->pdev))) {
-			DPRINTK(PROBE, ERR,
-			 "Unable to allocate MSI interrupt Error: %d\n", err);
-			adapter->have_msi = FALSE;
-		}
-	}
-#endif
-	if ((err = request_irq(adapter->pdev->irq, &e1000_intr,
-		              IRQF_SHARED | IRQF_SAMPLE_RANDOM,
-		              netdev->name, netdev))) {
-		DPRINTK(PROBE, ERR,
-		    "Unable to allocate interrupt Error: %d\n", err);
-		return err;
-	}
-
 	adapter->tx_queue_len = netdev->tx_queue_len;
 
 	mod_timer(&adapter->watchdog_timer, jiffies);
@@ -445,21 +475,60 @@ e1000_up(struct e1000_adapter *adapter)
 	return 0;
 }
 
+/**
+ * e1000_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000_reset ***
+ *
+ **/
+
+static void e1000_power_up_phy(struct e1000_adapter *adapter)
+{
+	uint16_t mii_reg = 0;
+
+	/* Just clear the power down bit to wake the phy back up */
+	if (adapter->hw.media_type == e1000_media_type_copper) {
+		/* according to the manual, the phy will retain its
+		 * settings across a power-down/up cycle */
+		e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+		mii_reg &= ~MII_CR_POWER_DOWN;
+		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+	}
+}
+
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+	boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) &&
+	                              e1000_check_mng_mode(&adapter->hw);
+	/* Power down the PHY so no link is implied when interface is down
+	 * The PHY cannot be powered down if any of the following is TRUE
+	 * (a) WoL is enabled
+	 * (b) AMT is active
+	 * (c) SoL/IDER session is active */
+	if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
+	    adapter->hw.mac_type != e1000_ich8lan &&
+	    adapter->hw.media_type == e1000_media_type_copper &&
+	    !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
+	    !mng_mode_enabled &&
+	    !e1000_check_phy_reset_block(&adapter->hw)) {
+		uint16_t mii_reg = 0;
+		e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+		mii_reg |= MII_CR_POWER_DOWN;
+		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+		mdelay(1);
+	}
+}
+
 void
 e1000_down(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) &&
-				     e1000_check_mng_mode(&adapter->hw);
 
 	e1000_irq_disable(adapter);
 
-	free_irq(adapter->pdev->irq, netdev);
-#ifdef CONFIG_PCI_MSI
-	if (adapter->hw.mac_type > e1000_82547_rev_2 &&
-	   adapter->have_msi == TRUE)
-		pci_disable_msi(adapter->pdev);
-#endif
 	del_timer_sync(&adapter->tx_fifo_stall_timer);
 	del_timer_sync(&adapter->watchdog_timer);
 	del_timer_sync(&adapter->phy_info_timer);
@@ -476,23 +545,17 @@ e1000_down(struct e1000_adapter *adapter)
 	e1000_reset(adapter);
 	e1000_clean_all_tx_rings(adapter);
 	e1000_clean_all_rx_rings(adapter);
+}
 
-	/* Power down the PHY so no link is implied when interface is down *
-	 * The PHY cannot be powered down if any of the following is TRUE *
-	 * (a) WoL is enabled
-	 * (b) AMT is active
-	 * (c) SoL/IDER session is active */
-	if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
-	   adapter->hw.media_type == e1000_media_type_copper &&
-	   !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
-	   !mng_mode_enabled &&
-	   !e1000_check_phy_reset_block(&adapter->hw)) {
-		uint16_t mii_reg;
-		e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
-		mii_reg |= MII_CR_POWER_DOWN;
-		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
-		mdelay(1);
-	}
+void
+e1000_reinit_locked(struct e1000_adapter *adapter)
+{
+	WARN_ON(in_interrupt());
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+		msleep(1);
+	e1000_down(adapter);
+	e1000_up(adapter);
+	clear_bit(__E1000_RESETTING, &adapter->flags);
 }
 
 void
@@ -518,6 +581,9 @@ e1000_reset(struct e1000_adapter *adapter)
 	case e1000_82573:
 		pba = E1000_PBA_12K;
 		break;
+	case e1000_ich8lan:
+		pba = E1000_PBA_8K;
+		break;
 	default:
 		pba = E1000_PBA_48K;
 		break;
@@ -542,6 +608,12 @@ e1000_reset(struct e1000_adapter *adapter)
 	/* Set the FC high water mark to 90% of the FIFO size.
 	 * Required to clear last 3 LSB */
 	fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
+	/* We can't use 90% on small FIFOs because the remainder
+	 * would be less than 1 full frame.  In this case, we size
+	 * it to allow at least a full frame above the high water
+	 *  mark. */
+	if (pba < E1000_PBA_16K)
+		fc_high_water_mark = (pba * 1024) - 1600;
 
 	adapter->hw.fc_high_water = fc_high_water_mark;
 	adapter->hw.fc_low_water = fc_high_water_mark - 8;
@@ -564,6 +636,23 @@ e1000_reset(struct e1000_adapter *adapter)
 
 	e1000_reset_adaptive(&adapter->hw);
 	e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
+
+	if (!adapter->smart_power_down &&
+	    (adapter->hw.mac_type == e1000_82571 ||
+	     adapter->hw.mac_type == e1000_82572)) {
+		uint16_t phy_data = 0;
+		/* speed up time to link by disabling smart power down, ignore
+		 * the return value of this function because there is nothing
+		 * different we would do if it failed */
+		e1000_read_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+		                   &phy_data);
+		phy_data &= ~IGP02E1000_PM_SPD;
+		e1000_write_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+		                    phy_data);
+	}
+
+	if (adapter->hw.mac_type < e1000_ich8lan)
+	/* FIXME: this code is duplicate and wrong for PCI Express */
 	if (adapter->en_mng_pt) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
@@ -590,6 +679,7 @@ e1000_probe(struct pci_dev *pdev,
 	struct net_device *netdev;
 	struct e1000_adapter *adapter;
 	unsigned long mmio_start, mmio_len;
+	unsigned long flash_start, flash_len;
 
 	static int cards_found = 0;
 	static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */
@@ -599,10 +689,12 @@ e1000_probe(struct pci_dev *pdev,
 	if ((err = pci_enable_device(pdev)))
 		return err;
 
-	if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
+	if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
+	    !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
 		pci_using_dac = 1;
 	} else {
-		if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
+		if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
+		    (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
 			E1000_ERR("No usable DMA configuration, aborting\n");
 			return err;
 		}
@@ -682,6 +774,19 @@ e1000_probe(struct pci_dev *pdev,
 	if ((err = e1000_sw_init(adapter)))
 		goto err_sw_init;
 
+	/* Flash BAR mapping must happen after e1000_sw_init
+	 * because it depends on mac_type */
+	if ((adapter->hw.mac_type == e1000_ich8lan) &&
+	   (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
+		flash_start = pci_resource_start(pdev, 1);
+		flash_len = pci_resource_len(pdev, 1);
+		adapter->hw.flash_address = ioremap(flash_start, flash_len);
+		if (!adapter->hw.flash_address) {
+			err = -EIO;
+			goto err_flashmap;
+		}
+	}
+
 	if ((err = e1000_check_phy_reset_block(&adapter->hw)))
 		DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
 
@@ -700,6 +805,8 @@ e1000_probe(struct pci_dev *pdev,
 				   NETIF_F_HW_VLAN_TX |
 				   NETIF_F_HW_VLAN_RX |
 				   NETIF_F_HW_VLAN_FILTER;
+		if (adapter->hw.mac_type == e1000_ich8lan)
+			netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
 	}
 
 #ifdef NETIF_F_TSO
@@ -715,11 +822,17 @@ e1000_probe(struct pci_dev *pdev,
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
-	/* hard_start_xmit is safe against parallel locking */
 	netdev->features |= NETIF_F_LLTX;
 
 	adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
 
+	/* initialize eeprom parameters */
+
+	if (e1000_init_eeprom_params(&adapter->hw)) {
+		E1000_ERR("EEPROM initialization failed\n");
+		return -EIO;
+	}
+
 	/* before reading the EEPROM, reset the controller to
 	 * put the device in a known good starting state */
 
@@ -758,9 +871,6 @@ e1000_probe(struct pci_dev *pdev,
 	adapter->watchdog_timer.function = &e1000_watchdog;
 	adapter->watchdog_timer.data = (unsigned long) adapter;
 
-	INIT_WORK(&adapter->watchdog_task,
-		(void (*)(void *))e1000_watchdog_task, adapter);
-
 	init_timer(&adapter->phy_info_timer);
 	adapter->phy_info_timer.function = &e1000_update_phy_info;
 	adapter->phy_info_timer.data = (unsigned long) adapter;
@@ -790,6 +900,11 @@ e1000_probe(struct pci_dev *pdev,
 			EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
 		eeprom_apme_mask = E1000_EEPROM_82544_APM;
 		break;
+	case e1000_ich8lan:
+		e1000_read_eeprom(&adapter->hw,
+			EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
+		eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
+		break;
 	case e1000_82546:
 	case e1000_82546_rev_3:
 	case e1000_82571:
@@ -849,6 +964,9 @@ e1000_probe(struct pci_dev *pdev,
 	return 0;
 
 err_register:
+	if (adapter->hw.flash_address)
+		iounmap(adapter->hw.flash_address);
+err_flashmap:
 err_sw_init:
 err_eeprom:
 	iounmap(adapter->hw.hw_addr);
@@ -882,6 +1000,7 @@ e1000_remove(struct pci_dev *pdev)
 	flush_scheduled_work();
 
 	if (adapter->hw.mac_type >= e1000_82540 &&
+	   adapter->hw.mac_type != e1000_ich8lan &&
 	   adapter->hw.media_type == e1000_media_type_copper) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		if (manc & E1000_MANC_SMBUS_EN) {
@@ -910,6 +1029,8 @@ e1000_remove(struct pci_dev *pdev)
 #endif
 
 	iounmap(adapter->hw.hw_addr);
+	if (adapter->hw.flash_address)
+		iounmap(adapter->hw.flash_address);
 	pci_release_regions(pdev);
 
 	free_netdev(netdev);
@@ -960,13 +1081,6 @@ e1000_sw_init(struct e1000_adapter *adapter)
 		return -EIO;
 	}
 
-	/* initialize eeprom parameters */
-
-	if (e1000_init_eeprom_params(hw)) {
-		E1000_ERR("EEPROM initialization failed\n");
-		return -EIO;
-	}
-
 	switch (hw->mac_type) {
 	default:
 		break;
@@ -1078,6 +1192,10 @@ e1000_open(struct net_device *netdev)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int err;
 
+	/* disallow open during test */
+	if (test_bit(__E1000_DRIVER_TESTING, &adapter->flags))
+		return -EBUSY;
+
 	/* allocate transmit descriptors */
 
 	if ((err = e1000_setup_all_tx_resources(adapter)))
@@ -1088,6 +1206,12 @@ e1000_open(struct net_device *netdev)
 	if ((err = e1000_setup_all_rx_resources(adapter)))
 		goto err_setup_rx;
 
+	err = e1000_request_irq(adapter);
+	if (err)
+		goto err_up;
+
+	e1000_power_up_phy(adapter);
+
 	if ((err = e1000_up(adapter)))
 		goto err_up;
 	adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
@@ -1131,7 +1255,10 @@ e1000_close(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
+	WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
 	e1000_down(adapter);
+	e1000_power_down_phy(adapter);
+	e1000_free_irq(adapter);
 
 	e1000_free_all_tx_resources(adapter);
 	e1000_free_all_rx_resources(adapter);
@@ -1189,8 +1316,7 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter,
 	int size;
 
 	size = sizeof(struct e1000_buffer) * txdr->count;
-
-	txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
+	txdr->buffer_info = vmalloc(size);
 	if (!txdr->buffer_info) {
 		DPRINTK(PROBE, ERR,
 		"Unable to allocate memory for the transmit descriptor ring\n");
@@ -1302,11 +1428,11 @@ e1000_configure_tx(struct e1000_adapter *adapter)
 		tdba = adapter->tx_ring[0].dma;
 		tdlen = adapter->tx_ring[0].count *
 			sizeof(struct e1000_tx_desc);
-		E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
-		E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
 		E1000_WRITE_REG(hw, TDLEN, tdlen);
-		E1000_WRITE_REG(hw, TDH, 0);
+		E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
+		E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
 		E1000_WRITE_REG(hw, TDT, 0);
+		E1000_WRITE_REG(hw, TDH, 0);
 		adapter->tx_ring[0].tdh = E1000_TDH;
 		adapter->tx_ring[0].tdt = E1000_TDT;
 		break;
@@ -1418,7 +1544,7 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter,
 	int size, desc_len;
 
 	size = sizeof(struct e1000_buffer) * rxdr->count;
-	rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
+	rxdr->buffer_info = vmalloc(size);
 	if (!rxdr->buffer_info) {
 		DPRINTK(PROBE, ERR,
 		"Unable to allocate memory for the receive descriptor ring\n");
@@ -1560,9 +1686,6 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
 		E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
 		(adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
 
-	if (adapter->hw.mac_type > e1000_82543)
-		rctl |= E1000_RCTL_SECRC;
-
 	if (adapter->hw.tbi_compatibility_on == 1)
 		rctl |= E1000_RCTL_SBP;
 	else
@@ -1628,7 +1751,7 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
 		rfctl |= E1000_RFCTL_IPV6_DIS;
 		E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
 
-		rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC;
+		rctl |= E1000_RCTL_DTYP_PS;
 
 		psrctl |= adapter->rx_ps_bsize0 >>
 			E1000_PSRCTL_BSIZE0_SHIFT;
@@ -1712,11 +1835,11 @@ e1000_configure_rx(struct e1000_adapter *adapter)
 	case 1:
 	default:
 		rdba = adapter->rx_ring[0].dma;
-		E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
-		E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
 		E1000_WRITE_REG(hw, RDLEN, rdlen);
-		E1000_WRITE_REG(hw, RDH, 0);
+		E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
+		E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
 		E1000_WRITE_REG(hw, RDT, 0);
+		E1000_WRITE_REG(hw, RDH, 0);
 		adapter->rx_ring[0].rdh = E1000_RDH;
 		adapter->rx_ring[0].rdt = E1000_RDT;
 		break;
@@ -1741,9 +1864,6 @@ e1000_configure_rx(struct e1000_adapter *adapter)
 		E1000_WRITE_REG(hw, RXCSUM, rxcsum);
 	}
 
-	if (hw->mac_type == e1000_82573)
-		E1000_WRITE_REG(hw, ERT, 0x0100);
-
 	/* Enable Receives */
 	E1000_WRITE_REG(hw, RCTL, rctl);
 }
@@ -2083,6 +2203,12 @@ e1000_set_multi(struct net_device *netdev)
 	uint32_t rctl;
 	uint32_t hash_value;
 	int i, rar_entries = E1000_RAR_ENTRIES;
+	int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
+				E1000_NUM_MTA_REGISTERS_ICH8LAN :
+				E1000_NUM_MTA_REGISTERS;
+
+	if (adapter->hw.mac_type == e1000_ich8lan)
+		rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
 
 	/* reserve RAR[14] for LAA over-write work-around */
 	if (adapter->hw.mac_type == e1000_82571)
@@ -2121,14 +2247,18 @@ e1000_set_multi(struct net_device *netdev)
 			mc_ptr = mc_ptr->next;
 		} else {
 			E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
+			E1000_WRITE_FLUSH(hw);
 			E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
+			E1000_WRITE_FLUSH(hw);
 		}
 	}
 
 	/* clear the old settings from the multicast hash table */
 
-	for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++)
+	for (i = 0; i < mta_reg_count; i++) {
 		E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+		E1000_WRITE_FLUSH(hw);
+	}
 
 	/* load any remaining addresses into the hash table */
 
@@ -2201,19 +2331,19 @@ static void
 e1000_watchdog(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-
-	/* Do the rest outside of interrupt context */
-	schedule_work(&adapter->watchdog_task);
-}
-
-static void
-e1000_watchdog_task(struct e1000_adapter *adapter)
-{
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_tx_ring *txdr = adapter->tx_ring;
 	uint32_t link, tctl;
-
-	e1000_check_for_link(&adapter->hw);
+	int32_t ret_val;
+
+	ret_val = e1000_check_for_link(&adapter->hw);
+	if ((ret_val == E1000_ERR_PHY) &&
+	    (adapter->hw.phy_type == e1000_phy_igp_3) &&
+	    (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+		/* See e1000_kumeran_lock_loss_workaround() */
+		DPRINTK(LINK, INFO,
+			"Gigabit has been disabled, downgrading speed\n");
+	}
 	if (adapter->hw.mac_type == e1000_82573) {
 		e1000_enable_tx_pkt_filtering(&adapter->hw);
 		if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
@@ -2394,7 +2524,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 	uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
 	int err;
 
-	if (skb_shinfo(skb)->gso_size) {
+	if (skb_is_gso(skb)) {
 		if (skb_header_cloned(skb)) {
 			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
 			if (err)
@@ -2519,7 +2649,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 		 * tso gets written back prematurely before the data is fully
 		 * DMA'd to the controller */
 		if (!skb->data_len && tx_ring->last_tx_tso &&
-		    !skb_shinfo(skb)->gso_size) {
+		    !skb_is_gso(skb)) {
 			tx_ring->last_tx_tso = 0;
 			size -= 4;
 		}
@@ -2779,9 +2909,10 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 			case e1000_82571:
 			case e1000_82572:
 			case e1000_82573:
+			case e1000_ich8lan:
 				pull_size = min((unsigned int)4, skb->data_len);
 				if (!__pskb_pull_tail(skb, pull_size)) {
-					printk(KERN_ERR
+					DPRINTK(DRV, ERR,
 						"__pskb_pull_tail failed.\n");
 					dev_kfree_skb_any(skb);
 					return NETDEV_TX_OK;
@@ -2806,8 +2937,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 #ifdef NETIF_F_TSO
 	/* Controller Erratum workaround */
-	if (!skb->data_len && tx_ring->last_tx_tso &&
-	    !skb_shinfo(skb)->gso_size)
+	if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
 		count++;
 #endif
 
@@ -2919,8 +3049,7 @@ e1000_reset_task(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
-	e1000_down(adapter);
-	e1000_up(adapter);
+	e1000_reinit_locked(adapter);
 }
 
 /**
@@ -2964,6 +3093,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	/* Adapter-specific max frame size limits. */
 	switch (adapter->hw.mac_type) {
 	case e1000_undefined ... e1000_82542_rev2_1:
+	case e1000_ich8lan:
 		if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
 			DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
 			return -EINVAL;
@@ -3026,10 +3156,8 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
 
 	netdev->mtu = new_mtu;
 
-	if (netif_running(netdev)) {
-		e1000_down(adapter);
-		e1000_up(adapter);
-	}
+	if (netif_running(netdev))
+		e1000_reinit_locked(adapter);
 
 	adapter->hw.max_frame_size = max_frame;
 
@@ -3074,12 +3202,15 @@ e1000_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
 	adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
 	adapter->stats.roc += E1000_READ_REG(hw, ROC);
+
+	if (adapter->hw.mac_type != e1000_ich8lan) {
 	adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
 	adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
 	adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
 	adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
 	adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
 	adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
+	}
 
 	adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
 	adapter->stats.mpc += E1000_READ_REG(hw, MPC);
@@ -3107,12 +3238,16 @@ e1000_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.totl += E1000_READ_REG(hw, TOTL);
 	adapter->stats.toth += E1000_READ_REG(hw, TOTH);
 	adapter->stats.tpr += E1000_READ_REG(hw, TPR);
+
+	if (adapter->hw.mac_type != e1000_ich8lan) {
 	adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
 	adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
 	adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
 	adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
 	adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
 	adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
+	}
+
 	adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
 	adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
 
@@ -3134,6 +3269,8 @@ e1000_update_stats(struct e1000_adapter *adapter)
 	if (hw->mac_type > e1000_82547_rev_2) {
 		adapter->stats.iac += E1000_READ_REG(hw, IAC);
 		adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
+
+		if (adapter->hw.mac_type != e1000_ich8lan) {
 		adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
 		adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
 		adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
@@ -3141,6 +3278,7 @@ e1000_update_stats(struct e1000_adapter *adapter)
 		adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
 		adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
 		adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
+		}
 	}
 
 	/* Fill out the OS statistics structure */
@@ -3547,7 +3685,8 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 			/* All receives must fit into a single buffer */
 			E1000_DBG("%s: Receive packet consumed multiple"
 				  " buffers\n", netdev->name);
-			dev_kfree_skb_irq(skb);
+			/* recycle */
+			buffer_info-> skb = skb;
 			goto next_desc;
 		}
 
@@ -3675,7 +3814,6 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 	buffer_info = &rx_ring->buffer_info[i];
 
 	while (staterr & E1000_RXD_STAT_DD) {
-		buffer_info = &rx_ring->buffer_info[i];
 		ps_page = &rx_ring->ps_page[i];
 		ps_page_dma = &rx_ring->ps_page_dma[i];
 #ifdef CONFIG_E1000_NAPI
@@ -4180,10 +4318,9 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 						return retval;
 					}
 				}
-				if (netif_running(adapter->netdev)) {
-					e1000_down(adapter);
-					e1000_up(adapter);
-				} else
+				if (netif_running(adapter->netdev))
+					e1000_reinit_locked(adapter);
+				else
 					e1000_reset(adapter);
 				break;
 			case M88E1000_PHY_SPEC_CTRL:
@@ -4200,10 +4337,9 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 			case PHY_CTRL:
 				if (mii_reg & MII_CR_POWER_DOWN)
 					break;
-				if (netif_running(adapter->netdev)) {
-					e1000_down(adapter);
-					e1000_up(adapter);
-				} else
+				if (netif_running(adapter->netdev))
+					e1000_reinit_locked(adapter);
+				else
 					e1000_reset(adapter);
 				break;
 			}
@@ -4277,18 +4413,21 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
 		ctrl |= E1000_CTRL_VME;
 		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
 
+		if (adapter->hw.mac_type != e1000_ich8lan) {
 		/* enable VLAN receive filtering */
 		rctl = E1000_READ_REG(&adapter->hw, RCTL);
 		rctl |= E1000_RCTL_VFE;
 		rctl &= ~E1000_RCTL_CFIEN;
 		E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
 		e1000_update_mng_vlan(adapter);
+		}
 	} else {
 		/* disable VLAN tag insert/strip */
 		ctrl = E1000_READ_REG(&adapter->hw, CTRL);
 		ctrl &= ~E1000_CTRL_VME;
 		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
 
+		if (adapter->hw.mac_type != e1000_ich8lan) {
 		/* disable VLAN filtering */
 		rctl = E1000_READ_REG(&adapter->hw, RCTL);
 		rctl &= ~E1000_RCTL_VFE;
@@ -4297,6 +4436,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
 			e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
 			adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
 		}
+		}
 	}
 
 	e1000_irq_enable(adapter);
@@ -4458,12 +4598,16 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	uint32_t ctrl, ctrl_ext, rctl, manc, status;
 	uint32_t wufc = adapter->wol;
+#ifdef CONFIG_PM
 	int retval = 0;
+#endif
 
 	netif_device_detach(netdev);
 
-	if (netif_running(netdev))
+	if (netif_running(netdev)) {
+		WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
 		e1000_down(adapter);
+	}
 
 #ifdef CONFIG_PM
 	/* Implement our own version of pci_save_state(pdev) because pci-
@@ -4521,7 +4665,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
 
+	/* FIXME: this code is incorrect for PCI Express */
 	if (adapter->hw.mac_type >= e1000_82540 &&
+	   adapter->hw.mac_type != e1000_ich8lan &&
 	   adapter->hw.media_type == e1000_media_type_copper) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		if (manc & E1000_MANC_SMBUS_EN) {
@@ -4532,6 +4678,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 		}
 	}
 
+	if (adapter->hw.phy_type == e1000_phy_igp_3)
+		e1000_phy_powerdown_workaround(&adapter->hw);
+
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant. */
 	e1000_release_hw_control(adapter);
@@ -4567,7 +4716,9 @@ e1000_resume(struct pci_dev *pdev)
 
 	netif_device_attach(netdev);
 
+	/* FIXME: this code is incorrect for PCI Express */
 	if (adapter->hw.mac_type >= e1000_82540 &&
+	   adapter->hw.mac_type != e1000_ich8lan &&
 	   adapter->hw.media_type == e1000_media_type_copper) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		manc &= ~(E1000_MANC_ARP_EN);
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index 048d052..2d3e8b0 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -127,4 +127,17 @@ typedef enum {
 
 #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS)
 
+#define E1000_WRITE_ICH8_REG(a, reg, value) ( \
+    writel((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH8_REG(a, reg) ( \
+    readl((a)->flash_address + reg))
+
+#define E1000_WRITE_ICH8_REG16(a, reg, value) ( \
+    writew((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH8_REG16(a, reg) ( \
+    readw((a)->flash_address + reg))
+
+
 #endif /* _E1000_OSDEP_H_ */
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index e55f896..0ef4131 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -45,6 +45,16 @@
  */
 
 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+/* Module Parameters are always initialized to -1, so that the driver
+ * can tell the difference between no user specified value or the
+ * user asking for the default value.
+ * The true default values are loaded in when e1000_check_options is called.
+ *
+ * This is a GCC extension to ANSI C.
+ * See the item "Labeled Elements in Initializers" in the section
+ * "Extensions to the C Language Family" of the GCC documentation.
+ */
+
 #define E1000_PARAM(X, desc) \
 	static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
 	static int num_##X = 0; \
@@ -183,6 +193,24 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
 
 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
 
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
 #define AUTONEG_ADV_DEFAULT  0x2F
 #define AUTONEG_ADV_MASK     0x2F
 #define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
@@ -296,6 +324,7 @@ e1000_check_options(struct e1000_adapter *adapter)
 		DPRINTK(PROBE, NOTICE,
 		       "Warning: no configuration for board #%i\n", bd);
 		DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+		bd = E1000_MAX_NIC;
 	}
 
 	{ /* Transmit Descriptor Count */
@@ -313,14 +342,9 @@ e1000_check_options(struct e1000_adapter *adapter)
 		opt.arg.r.max = mac_type < e1000_82544 ?
 			E1000_MAX_TXD : E1000_MAX_82544_TXD;
 
-		if (num_TxDescriptors > bd) {
-			tx_ring->count = TxDescriptors[bd];
-			e1000_validate_option(&tx_ring->count, &opt, adapter);
-			E1000_ROUNDUP(tx_ring->count,
-						REQ_TX_DESCRIPTOR_MULTIPLE);
-		} else {
-			tx_ring->count = opt.def;
-		}
+		tx_ring->count = TxDescriptors[bd];
+		e1000_validate_option(&tx_ring->count, &opt, adapter);
+		E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
 		for (i = 0; i < adapter->num_tx_queues; i++)
 			tx_ring[i].count = tx_ring->count;
 	}
@@ -339,14 +363,9 @@ e1000_check_options(struct e1000_adapter *adapter)
 		opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
 			E1000_MAX_82544_RXD;
 
-		if (num_RxDescriptors > bd) {
-			rx_ring->count = RxDescriptors[bd];
-			e1000_validate_option(&rx_ring->count, &opt, adapter);
-			E1000_ROUNDUP(rx_ring->count,
-						REQ_RX_DESCRIPTOR_MULTIPLE);
-		} else {
-			rx_ring->count = opt.def;
-		}
+		rx_ring->count = RxDescriptors[bd];
+		e1000_validate_option(&rx_ring->count, &opt, adapter);
+		E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
 		for (i = 0; i < adapter->num_rx_queues; i++)
 			rx_ring[i].count = rx_ring->count;
 	}
@@ -358,13 +377,9 @@ e1000_check_options(struct e1000_adapter *adapter)
 			.def  = OPTION_ENABLED
 		};
 
-		if (num_XsumRX > bd) {
-			int rx_csum = XsumRX[bd];
-			e1000_validate_option(&rx_csum, &opt, adapter);
-			adapter->rx_csum = rx_csum;
-		} else {
-			adapter->rx_csum = opt.def;
-		}
+		int rx_csum = XsumRX[bd];
+		e1000_validate_option(&rx_csum, &opt, adapter);
+		adapter->rx_csum = rx_csum;
 	}
 	{ /* Flow Control */
 
@@ -384,13 +399,9 @@ e1000_check_options(struct e1000_adapter *adapter)
 					 .p = fc_list }}
 		};
 
-		if (num_FlowControl > bd) {
-			int fc = FlowControl[bd];
-			e1000_validate_option(&fc, &opt, adapter);
-			adapter->hw.fc = adapter->hw.original_fc = fc;
-		} else {
-			adapter->hw.fc = adapter->hw.original_fc = opt.def;
-		}
+		int fc = FlowControl[bd];
+		e1000_validate_option(&fc, &opt, adapter);
+		adapter->hw.fc = adapter->hw.original_fc = fc;
 	}
 	{ /* Transmit Interrupt Delay */
 		struct e1000_option opt = {
@@ -402,13 +413,8 @@ e1000_check_options(struct e1000_adapter *adapter)
 					 .max = MAX_TXDELAY }}
 		};
 
-		if (num_TxIntDelay > bd) {
-			adapter->tx_int_delay = TxIntDelay[bd];
-			e1000_validate_option(&adapter->tx_int_delay, &opt,
-								adapter);
-		} else {
-			adapter->tx_int_delay = opt.def;
-		}
+		adapter->tx_int_delay = TxIntDelay[bd];
+		e1000_validate_option(&adapter->tx_int_delay, &opt, adapter);
 	}
 	{ /* Transmit Absolute Interrupt Delay */
 		struct e1000_option opt = {
@@ -420,13 +426,9 @@ e1000_check_options(struct e1000_adapter *adapter)
 					 .max = MAX_TXABSDELAY }}
 		};
 
-		if (num_TxAbsIntDelay > bd) {
-			adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
-			e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
-								adapter);
-		} else {
-			adapter->tx_abs_int_delay = opt.def;
-		}
+		adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+		e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+		                      adapter);
 	}
 	{ /* Receive Interrupt Delay */
 		struct e1000_option opt = {
@@ -438,13 +440,8 @@ e1000_check_options(struct e1000_adapter *adapter)
 					 .max = MAX_RXDELAY }}
 		};
 
-		if (num_RxIntDelay > bd) {
-			adapter->rx_int_delay = RxIntDelay[bd];
-			e1000_validate_option(&adapter->rx_int_delay, &opt,
-								adapter);
-		} else {
-			adapter->rx_int_delay = opt.def;
-		}
+		adapter->rx_int_delay = RxIntDelay[bd];
+		e1000_validate_option(&adapter->rx_int_delay, &opt, adapter);
 	}
 	{ /* Receive Absolute Interrupt Delay */
 		struct e1000_option opt = {
@@ -456,13 +453,9 @@ e1000_check_options(struct e1000_adapter *adapter)
 					 .max = MAX_RXABSDELAY }}
 		};
 
-		if (num_RxAbsIntDelay > bd) {
-			adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
-			e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
-								adapter);
-		} else {
-			adapter->rx_abs_int_delay = opt.def;
-		}
+		adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+		e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+		                      adapter);
 	}
 	{ /* Interrupt Throttling Rate */
 		struct e1000_option opt = {
@@ -474,26 +467,44 @@ e1000_check_options(struct e1000_adapter *adapter)
 					 .max = MAX_ITR }}
 		};
 
-		if (num_InterruptThrottleRate > bd) {
-			adapter->itr = InterruptThrottleRate[bd];
-			switch (adapter->itr) {
-			case 0:
-				DPRINTK(PROBE, INFO, "%s turned off\n",
-					opt.name);
-				break;
-			case 1:
-				DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
-					opt.name);
-				break;
-			default:
-				e1000_validate_option(&adapter->itr, &opt,
-					adapter);
-				break;
-			}
-		} else {
-			adapter->itr = opt.def;
+		adapter->itr = InterruptThrottleRate[bd];
+		switch (adapter->itr) {
+		case 0:
+			DPRINTK(PROBE, INFO, "%s turned off\n", opt.name);
+			break;
+		case 1:
+			DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+				opt.name);
+			break;
+		default:
+			e1000_validate_option(&adapter->itr, &opt, adapter);
+			break;
 		}
 	}
+	{ /* Smart Power Down */
+		struct e1000_option opt = {
+			.type = enable_option,
+			.name = "PHY Smart Power Down",
+			.err  = "defaulting to Disabled",
+			.def  = OPTION_DISABLED
+		};
+
+		int spd = SmartPowerDownEnable[bd];
+		e1000_validate_option(&spd, &opt, adapter);
+		adapter->smart_power_down = spd;
+	}
+	{ /* Kumeran Lock Loss Workaround */
+		struct e1000_option opt = {
+			.type = enable_option,
+			.name = "Kumeran Lock Loss Workaround",
+			.err  = "defaulting to Enabled",
+			.def  = OPTION_ENABLED
+		};
+
+			int kmrn_lock_loss = KumeranLockLoss[bd];
+			e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+			adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
+	}
 
 	switch (adapter->hw.media_type) {
 	case e1000_media_type_fiber:
@@ -519,17 +530,18 @@ static void __devinit
 e1000_check_fiber_options(struct e1000_adapter *adapter)
 {
 	int bd = adapter->bd_number;
-	if (num_Speed > bd) {
+	bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
+	if ((Speed[bd] != OPTION_UNSET)) {
 		DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
 		       "parameter ignored\n");
 	}
 
-	if (num_Duplex > bd) {
+	if ((Duplex[bd] != OPTION_UNSET)) {
 		DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
 		       "parameter ignored\n");
 	}
 
-	if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+	if ((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) {
 		DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
 				 "not valid for fiber adapters, "
 				 "parameter ignored\n");
@@ -548,6 +560,7 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
 {
 	int speed, dplx, an;
 	int bd = adapter->bd_number;
+	bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
 
 	{ /* Speed */
 		struct e1000_opt_list speed_list[] = {{          0, "" },
@@ -564,12 +577,8 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
 					 .p = speed_list }}
 		};
 
-		if (num_Speed > bd) {
-			speed = Speed[bd];
-			e1000_validate_option(&speed, &opt, adapter);
-		} else {
-			speed = opt.def;
-		}
+		speed = Speed[bd];
+		e1000_validate_option(&speed, &opt, adapter);
 	}
 	{ /* Duplex */
 		struct e1000_opt_list dplx_list[] = {{           0, "" },
@@ -591,15 +600,11 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
 			        "Speed/Duplex/AutoNeg parameter ignored.\n");
 			return;
 		}
-		if (num_Duplex > bd) {
-			dplx = Duplex[bd];
-			e1000_validate_option(&dplx, &opt, adapter);
-		} else {
-			dplx = opt.def;
-		}
+		dplx = Duplex[bd];
+		e1000_validate_option(&dplx, &opt, adapter);
 	}
 
-	if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+	if (AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) {
 		DPRINTK(PROBE, INFO,
 		       "AutoNeg specified along with Speed or Duplex, "
 		       "parameter ignored\n");
@@ -648,19 +653,15 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
 					 .p = an_list }}
 		};
 
-		if (num_AutoNeg > bd) {
-			an = AutoNeg[bd];
-			e1000_validate_option(&an, &opt, adapter);
-		} else {
-			an = opt.def;
-		}
+		an = AutoNeg[bd];
+		e1000_validate_option(&an, &opt, adapter);
 		adapter->hw.autoneg_advertised = an;
 	}
 
 	switch (speed + dplx) {
 	case 0:
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
-		if ((num_Speed > bd) && (speed != 0 || dplx != 0))
+		if (Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET)
 			DPRINTK(PROBE, INFO,
 			       "Speed and duplex autonegotiation enabled\n");
 		break;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 037d870..11b8f1b 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -240,10 +240,12 @@ enum {
 #define NVREG_RNDSEED_FORCE2	0x2d00
 #define NVREG_RNDSEED_FORCE3	0x7400
 
-	NvRegUnknownSetupReg1 = 0xA0,
-#define NVREG_UNKSETUP1_VAL	0x16070f
-	NvRegUnknownSetupReg2 = 0xA4,
-#define NVREG_UNKSETUP2_VAL	0x16
+	NvRegTxDeferral = 0xA0,
+#define NVREG_TX_DEFERRAL_DEFAULT	0x15050f
+#define NVREG_TX_DEFERRAL_RGMII_10_100	0x16070f
+#define NVREG_TX_DEFERRAL_RGMII_1000	0x14050f
+	NvRegRxDeferral = 0xA4,
+#define NVREG_RX_DEFERRAL_DEFAULT	0x16
 	NvRegMacAddrA = 0xA8,
 	NvRegMacAddrB = 0xAC,
 	NvRegMulticastAddrA = 0xB0,
@@ -269,8 +271,10 @@ enum {
 #define NVREG_LINKSPEED_MASK	(0xFFF)
 	NvRegUnknownSetupReg5 = 0x130,
 #define NVREG_UNKSETUP5_BIT31	(1<<31)
-	NvRegUnknownSetupReg3 = 0x13c,
-#define NVREG_UNKSETUP3_VAL1	0x200010
+	NvRegTxWatermark = 0x13c,
+#define NVREG_TX_WM_DESC1_DEFAULT	0x0200010
+#define NVREG_TX_WM_DESC2_3_DEFAULT	0x1e08000
+#define NVREG_TX_WM_DESC2_3_1000	0xfe08000
 	NvRegTxRxControl = 0x144,
 #define NVREG_TXRXCTL_KICK	0x0001
 #define NVREG_TXRXCTL_BIT1	0x0002
@@ -658,7 +662,7 @@ static const struct register_test nv_registers_test[] = {
 	{ NvRegMisc1, 0x03c },
 	{ NvRegOffloadConfig, 0x03ff },
 	{ NvRegMulticastAddrA, 0xffffffff },
-	{ NvRegUnknownSetupReg3, 0x0ff },
+	{ NvRegTxWatermark, 0x0ff },
 	{ NvRegWakeUpFlags, 0x07777 },
 	{ 0,0 }
 };
@@ -1495,7 +1499,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	np->tx_skbuff[nr] = skb;
 
 #ifdef NETIF_F_TSO
-	if (skb_shinfo(skb)->gso_size)
+	if (skb_is_gso(skb))
 		tx_flags_extra = NV_TX2_TSO | (skb_shinfo(skb)->gso_size << NV_TX2_TSO_SHIFT);
 	else
 #endif
@@ -2127,7 +2131,7 @@ static int nv_update_linkspeed(struct net_device *dev)
 	int newdup = np->duplex;
 	int mii_status;
 	int retval = 0;
-	u32 control_1000, status_1000, phyreg, pause_flags;
+	u32 control_1000, status_1000, phyreg, pause_flags, txreg;
 
 	/* BMSR_LSTATUS is latched, read it twice:
 	 * we want the current value.
@@ -2245,6 +2249,26 @@ set_speed:
 		phyreg |= PHY_1000;
 	writel(phyreg, base + NvRegPhyInterface);
 
+	if (phyreg & PHY_RGMII) {
+		if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000)
+			txreg = NVREG_TX_DEFERRAL_RGMII_1000;
+		else
+			txreg = NVREG_TX_DEFERRAL_RGMII_10_100;
+	} else {
+		txreg = NVREG_TX_DEFERRAL_DEFAULT;
+	}
+	writel(txreg, base + NvRegTxDeferral);
+
+	if (np->desc_ver == DESC_VER_1) {
+		txreg = NVREG_TX_WM_DESC1_DEFAULT;
+	} else {
+		if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000)
+			txreg = NVREG_TX_WM_DESC2_3_1000;
+		else
+			txreg = NVREG_TX_WM_DESC2_3_DEFAULT;
+	}
+	writel(txreg, base + NvRegTxWatermark);
+
 	writel(NVREG_MISC1_FORCE | ( np->duplex ? 0 : NVREG_MISC1_HD),
 		base + NvRegMisc1);
 	pci_push(base);
@@ -3910,7 +3934,10 @@ static int nv_open(struct net_device *dev)
 
 	/* 5) continue setup */
 	writel(np->linkspeed, base + NvRegLinkSpeed);
-	writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3);
+	if (np->desc_ver == DESC_VER_1)
+		writel(NVREG_TX_WM_DESC1_DEFAULT, base + NvRegTxWatermark);
+	else
+		writel(NVREG_TX_WM_DESC2_3_DEFAULT, base + NvRegTxWatermark);
 	writel(np->txrxctl_bits, base + NvRegTxRxControl);
 	writel(np->vlanctl_bits, base + NvRegVlanControl);
 	pci_push(base);
@@ -3932,8 +3959,8 @@ static int nv_open(struct net_device *dev)
 	writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus);
 	get_random_bytes(&i, sizeof(i));
 	writel(NVREG_RNDSEED_FORCE | (i&NVREG_RNDSEED_MASK), base + NvRegRandomSeed);
-	writel(NVREG_UNKSETUP1_VAL, base + NvRegUnknownSetupReg1);
-	writel(NVREG_UNKSETUP2_VAL, base + NvRegUnknownSetupReg2);
+	writel(NVREG_TX_DEFERRAL_DEFAULT, base + NvRegTxDeferral);
+	writel(NVREG_RX_DEFERRAL_DEFAULT, base + NvRegRxDeferral);
 	if (poll_interval == -1) {
 		if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT)
 			writel(NVREG_POLL_DEFAULT_THROUGHPUT, base + NvRegPollingInterval);
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index 0641f54..889f338 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -122,6 +122,12 @@ struct bpqdev {
 
 static LIST_HEAD(bpq_devices);
 
+/*
+ * bpqether network devices are paired with ethernet devices below them, so
+ * form a special "super class" of normal ethernet devices; split their locks
+ * off into a separate class since they always nest.
+ */
+static struct lock_class_key bpq_netdev_xmit_lock_key;
 
 /* ------------------------------------------------------------------------ */
 
@@ -528,6 +534,7 @@ static int bpq_new_device(struct net_device *edev)
 	err = register_netdevice(ndev);
 	if (err)
 		goto error;
+	lockdep_set_class(&ndev->_xmit_lock, &bpq_netdev_xmit_lock_key);
 
 	/* List protected by RTNL */
 	list_add_rcu(&bpq->bpq_list, &bpq_devices);
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index bf1fca5..e3c8cd5 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -146,7 +146,7 @@ static int __init ali_ircc_init(void)
 {
 	ali_chip_t *chip;
 	chipio_t info;
-	int ret = -ENODEV;
+	int ret;
 	int cfg, cfg_base;
 	int reg, revision;
 	int i = 0;
@@ -160,6 +160,7 @@ static int __init ali_ircc_init(void)
                 return ret;
         }
 
+	ret = -ENODEV;
 	
 	/* Probe for all the ALi chipsets we know about */
 	for (chip= chips; chip->name; chip++, i++) 
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index a467404..2eff45b 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -2353,7 +2353,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
 #ifdef CONFIG_PCI
 #define PCIID_VENDOR_INTEL 0x8086
 #define PCIID_VENDOR_ALI 0x10b9
-static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitdata = {
+static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
 	{
 		.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
 		.device = 0x24cc,
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index b91e082..7bbd447 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -1173,7 +1173,7 @@ ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb)
 	uint16_t ipcse, tucse, mss;
 	int err;
 
-	if(likely(skb_shinfo(skb)->gso_size)) {
+	if (likely(skb_is_gso(skb))) {
 		if (skb_header_cloned(skb)) {
 			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
 			if (err)
@@ -1281,7 +1281,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
 
 	while(len) {
 		buffer_info = &tx_ring->buffer_info[i];
-		size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE);
+		size = min(len, IXGB_MAX_DATA_PER_TXD);
 		buffer_info->length = size;
 		buffer_info->dma =
 			pci_map_single(adapter->pdev,
@@ -1306,7 +1306,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
 
 		while(len) {
 			buffer_info = &tx_ring->buffer_info[i];
-			size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE);
+			size = min(len, IXGB_MAX_DATA_PER_TXD);
 			buffer_info->length = size;
 			buffer_info->dma =
 				pci_map_page(adapter->pdev,
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 43fef7d..997cbce 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -139,7 +139,7 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 
 #ifdef LOOPBACK_TSO
-	if (skb_shinfo(skb)->gso_size) {
+	if (skb_is_gso(skb)) {
 		BUG_ON(skb->protocol != htons(ETH_P_IP));
 		BUG_ON(skb->nh.iph->protocol != IPPROTO_TCP);
 
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index f4c8fd3..07ca948 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -2116,7 +2116,7 @@ abort_linearize:
 		}
 		idx = (idx + 1) & tx->mask;
 	} while (idx != last_idx);
-	if (skb_shinfo(skb)->gso_size) {
+	if (skb_is_gso(skb)) {
 		printk(KERN_ERR
 		       "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
 		       mgp->dev->name);
@@ -2412,14 +2412,20 @@ static int myri10ge_resume(struct pci_dev *pdev)
 		return -EIO;
 	}
 	myri10ge_restore_state(mgp);
-	pci_enable_device(pdev);
+
+	status = pci_enable_device(pdev);
+	if (status < 0) {
+		dev_err(&pdev->dev, "failed to enable device\n");
+		return -EIO;
+	}
+
 	pci_set_master(pdev);
 
 	status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
 			     netdev->name, mgp);
 	if (status != 0) {
 		dev_err(&pdev->dev, "failed to allocate IRQ\n");
-		goto abort_with_msi;
+		goto abort_with_enabled;
 	}
 
 	myri10ge_reset(mgp);
@@ -2438,7 +2444,8 @@ static int myri10ge_resume(struct pci_dev *pdev)
 
 	return 0;
 
-abort_with_msi:
+abort_with_enabled:
+	pci_disable_device(pdev);
 	return -EIO;
 
 }
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index c6b77ac..e1fe3a0 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -1976,7 +1976,6 @@ static int start_nic(struct s2io_nic *nic)
 	XENA_dev_config_t __iomem *bar0 = nic->bar0;
 	struct net_device *dev = nic->dev;
 	register u64 val64 = 0;
-	u16 interruptible;
 	u16 subid, i;
 	mac_info_t *mac_control;
 	struct config_param *config;
@@ -2047,16 +2046,6 @@ static int start_nic(struct s2io_nic *nic)
 		return FAILURE;
 	}
 
-	/*  Enable select interrupts */
-	if (nic->intr_type != INTA)
-		en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS);
-	else {
-		interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
-		interruptible |= TX_PIC_INTR | RX_PIC_INTR;
-		interruptible |= TX_MAC_INTR | RX_MAC_INTR;
-		en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
-	}
-
 	/*
 	 * With some switches, link might be already up at this point.
 	 * Because of this weird behavior, when we enable laser,
@@ -3749,101 +3738,19 @@ static int s2io_open(struct net_device *dev)
 	if (err) {
 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
 			  dev->name);
-		if (err == -ENODEV)
-			goto hw_init_failed;
-		else
-			goto hw_enable_failed;
-	}
-
-	/* Store the values of the MSIX table in the nic_t structure */
-	store_xmsi_data(sp);
-
-	/* After proper initialization of H/W, register ISR */
-	if (sp->intr_type == MSI) {
-		err = request_irq((int) sp->pdev->irq, s2io_msi_handle, 
-			IRQF_SHARED, sp->name, dev);
-		if (err) {
-			DBG_PRINT(ERR_DBG, "%s: MSI registration \
-failed\n", dev->name);
-			goto isr_registration_failed;
-		}
-	}
-	if (sp->intr_type == MSI_X) {
-		int i;
-
-		for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
-			if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
-				sprintf(sp->desc1, "%s:MSI-X-%d-TX",
-					dev->name, i);
-				err = request_irq(sp->entries[i].vector,
-					  s2io_msix_fifo_handle, 0, sp->desc1,
-					  sp->s2io_entries[i].arg);
-				DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1, 
-				    (unsigned long long)sp->msix_info[i].addr);
-			} else {
-				sprintf(sp->desc2, "%s:MSI-X-%d-RX",
-					dev->name, i);
-				err = request_irq(sp->entries[i].vector,
-					  s2io_msix_ring_handle, 0, sp->desc2,
-					  sp->s2io_entries[i].arg);
-				DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2, 
-				     (unsigned long long)sp->msix_info[i].addr);
-			}
-			if (err) {
-				DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \
-failed\n", dev->name, i);
-				DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
-				goto isr_registration_failed;
-			}
-			sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
-		}
-	}
-	if (sp->intr_type == INTA) {
-		err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
-				sp->name, dev);
-		if (err) {
-			DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
-				  dev->name);
-			goto isr_registration_failed;
-		}
+		goto hw_init_failed;
 	}
 
 	if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
 		DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
+		s2io_card_down(sp);
 		err = -ENODEV;
-		goto setting_mac_address_failed;
+		goto hw_init_failed;
 	}
 
 	netif_start_queue(dev);
 	return 0;
 
-setting_mac_address_failed:
-	if (sp->intr_type != MSI_X)
-		free_irq(sp->pdev->irq, dev);
-isr_registration_failed:
-	del_timer_sync(&sp->alarm_timer);
-	if (sp->intr_type == MSI_X) {
-		int i;
-		u16 msi_control; /* Temp variable */
-
-		for (i=1; (sp->s2io_entries[i].in_use == 
-				MSIX_REGISTERED_SUCCESS); i++) {
-			int vector = sp->entries[i].vector;
-			void *arg = sp->s2io_entries[i].arg;
-
-			free_irq(vector, arg);
-		}
-		pci_disable_msix(sp->pdev);
-
-		/* Temp */
-		pci_read_config_word(sp->pdev, 0x42, &msi_control);
-		msi_control &= 0xFFFE; /* Disable MSI */
-		pci_write_config_word(sp->pdev, 0x42, msi_control);
-	}
-	else if (sp->intr_type == MSI)
-		pci_disable_msi(sp->pdev);
-hw_enable_failed:
-	s2io_reset(sp);
 hw_init_failed:
 	if (sp->intr_type == MSI_X) {
 		if (sp->entries)
@@ -3874,7 +3781,7 @@ static int s2io_close(struct net_device *dev)
 	flush_scheduled_work();
 	netif_stop_queue(dev);
 	/* Reset card, kill tasklet and free Tx and Rx buffers. */
-	s2io_card_down(sp, 1);
+	s2io_card_down(sp);
 
 	sp->device_close_flag = TRUE;	/* Device is shut down. */
 	return 0;
@@ -5919,7 +5826,7 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
 
 	dev->mtu = new_mtu;
 	if (netif_running(dev)) {
-		s2io_card_down(sp, 0);
+		s2io_card_down(sp);
 		netif_stop_queue(dev);
 		if (s2io_card_up(sp)) {
 			DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
@@ -6216,43 +6123,106 @@ static  int rxd_owner_bit_reset(nic_t *sp)
 
 }
 
-static void s2io_card_down(nic_t * sp, int flag)
+static int s2io_add_isr(nic_t * sp)
 {
-	int cnt = 0;
-	XENA_dev_config_t __iomem *bar0 = sp->bar0;
-	unsigned long flags;
-	register u64 val64 = 0;
+	int ret = 0;
 	struct net_device *dev = sp->dev;
+	int err = 0;
 
-	del_timer_sync(&sp->alarm_timer);
-	/* If s2io_set_link task is executing, wait till it completes. */
-	while (test_and_set_bit(0, &(sp->link_state))) {
-		msleep(50);
+	if (sp->intr_type == MSI)
+		ret = s2io_enable_msi(sp);
+	else if (sp->intr_type == MSI_X)
+		ret = s2io_enable_msi_x(sp);
+	if (ret) {
+		DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
+		sp->intr_type = INTA;
 	}
-	atomic_set(&sp->card_state, CARD_DOWN);
 
-	/* disable Tx and Rx traffic on the NIC */
-	stop_nic(sp);
-	if (flag) {
-		if (sp->intr_type == MSI_X) {
-			int i;
-			u16 msi_control;
+	/* Store the values of the MSIX table in the nic_t structure */
+	store_xmsi_data(sp);
 
-			for (i=1; (sp->s2io_entries[i].in_use ==
-				MSIX_REGISTERED_SUCCESS); i++) {
-				int vector = sp->entries[i].vector;
-				void *arg = sp->s2io_entries[i].arg;
+	/* After proper initialization of H/W, register ISR */
+	if (sp->intr_type == MSI) {
+		err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
+			IRQF_SHARED, sp->name, dev);
+		if (err) {
+			pci_disable_msi(sp->pdev);
+			DBG_PRINT(ERR_DBG, "%s: MSI registration failed\n",
+				  dev->name);
+			return -1;
+		}
+	}
+	if (sp->intr_type == MSI_X) {
+		int i;
 
-				free_irq(vector, arg);
+		for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
+			if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
+				sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
+					dev->name, i);
+				err = request_irq(sp->entries[i].vector,
+					  s2io_msix_fifo_handle, 0, sp->desc[i],
+						  sp->s2io_entries[i].arg);
+				DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
+				(unsigned long long)sp->msix_info[i].addr);
+			} else {
+				sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
+					dev->name, i);
+				err = request_irq(sp->entries[i].vector,
+					  s2io_msix_ring_handle, 0, sp->desc[i],
+						  sp->s2io_entries[i].arg);
+				DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
+				(unsigned long long)sp->msix_info[i].addr);
 			}
-			pci_read_config_word(sp->pdev, 0x42, &msi_control);
-			msi_control &= 0xFFFE; /* Disable MSI */
-			pci_write_config_word(sp->pdev, 0x42, msi_control);
-			pci_disable_msix(sp->pdev);
-		} else {
-			free_irq(sp->pdev->irq, dev);
-			if (sp->intr_type == MSI)
-				pci_disable_msi(sp->pdev);
+			if (err) {
+				DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
+					  "failed\n", dev->name, i);
+				DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
+				return -1;
+			}
+			sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
+		}
+	}
+	if (sp->intr_type == INTA) {
+		err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
+				sp->name, dev);
+		if (err) {
+			DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
+				  dev->name);
+			return -1;
+		}
+	}
+	return 0;
+}
+static void s2io_rem_isr(nic_t * sp)
+{
+	int cnt = 0;
+	struct net_device *dev = sp->dev;
+
+	if (sp->intr_type == MSI_X) {
+		int i;
+		u16 msi_control;
+
+		for (i=1; (sp->s2io_entries[i].in_use ==
+			MSIX_REGISTERED_SUCCESS); i++) {
+			int vector = sp->entries[i].vector;
+			void *arg = sp->s2io_entries[i].arg;
+
+			free_irq(vector, arg);
+		}
+		pci_read_config_word(sp->pdev, 0x42, &msi_control);
+		msi_control &= 0xFFFE; /* Disable MSI */
+		pci_write_config_word(sp->pdev, 0x42, msi_control);
+
+		pci_disable_msix(sp->pdev);
+	} else {
+		free_irq(sp->pdev->irq, dev);
+		if (sp->intr_type == MSI) {
+			u16 val;
+
+			pci_disable_msi(sp->pdev);
+			pci_read_config_word(sp->pdev, 0x4c, &val);
+			val ^= 0x1;
+			pci_write_config_word(sp->pdev, 0x4c, val);
 		}
 	}
 	/* Waiting till all Interrupt handlers are complete */
@@ -6263,6 +6233,26 @@ static void s2io_card_down(nic_t * sp, int flag)
 			break;
 		cnt++;
 	} while(cnt < 5);
+}
+
+static void s2io_card_down(nic_t * sp)
+{
+	int cnt = 0;
+	XENA_dev_config_t __iomem *bar0 = sp->bar0;
+	unsigned long flags;
+	register u64 val64 = 0;
+
+	del_timer_sync(&sp->alarm_timer);
+	/* If s2io_set_link task is executing, wait till it completes. */
+	while (test_and_set_bit(0, &(sp->link_state))) {
+		msleep(50);
+	}
+	atomic_set(&sp->card_state, CARD_DOWN);
+
+	/* disable Tx and Rx traffic on the NIC */
+	stop_nic(sp);
+
+	s2io_rem_isr(sp);
 
 	/* Kill tasklet. */
 	tasklet_kill(&sp->task);
@@ -6314,23 +6304,16 @@ static int s2io_card_up(nic_t * sp)
 	mac_info_t *mac_control;
 	struct config_param *config;
 	struct net_device *dev = (struct net_device *) sp->dev;
+	u16 interruptible;
 
 	/* Initialize the H/W I/O registers */
 	if (init_nic(sp) != 0) {
 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
 			  dev->name);
+		s2io_reset(sp);
 		return -ENODEV;
 	}
 
-	if (sp->intr_type == MSI)
-		ret = s2io_enable_msi(sp);
-	else if (sp->intr_type == MSI_X)
-		ret = s2io_enable_msi_x(sp);
-	if (ret) {
-		DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
-		sp->intr_type = INTA;
-	}
-
 	/*
 	 * Initializing the Rx buffers. For now we are considering only 1
 	 * Rx ring and initializing buffers into 30 Rx blocks
@@ -6361,21 +6344,39 @@ static int s2io_card_up(nic_t * sp)
 			sp->lro_max_aggr_per_sess = lro_max_pkts;
 	}
 
-	/* Enable tasklet for the device */
-	tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
-
 	/* Enable Rx Traffic and interrupts on the NIC */
 	if (start_nic(sp)) {
 		DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
-		tasklet_kill(&sp->task);
 		s2io_reset(sp);
-		free_irq(dev->irq, dev);
+		free_rx_buffers(sp);
+		return -ENODEV;
+	}
+
+	/* Add interrupt service routine */
+	if (s2io_add_isr(sp) != 0) {
+		if (sp->intr_type == MSI_X)
+			s2io_rem_isr(sp);
+		s2io_reset(sp);
 		free_rx_buffers(sp);
 		return -ENODEV;
 	}
 
 	S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
 
+	/* Enable tasklet for the device */
+	tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
+
+	/*  Enable select interrupts */
+	if (sp->intr_type != INTA)
+		en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
+	else {
+		interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+		interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+		interruptible |= TX_MAC_INTR | RX_MAC_INTR;
+		en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
+	}
+
+
 	atomic_set(&sp->card_state, CARD_UP);
 	return 0;
 }
@@ -6395,7 +6396,7 @@ static void s2io_restart_nic(unsigned long data)
 	struct net_device *dev = (struct net_device *) data;
 	nic_t *sp = dev->priv;
 
-	s2io_card_down(sp, 0);
+	s2io_card_down(sp);
 	if (s2io_card_up(sp)) {
 		DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
 			  dev->name);
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index c43f521..217097b 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -829,8 +829,7 @@ struct s2io_nic {
 #define MSIX_FLG                0xA5
 	struct msix_entry *entries;
 	struct s2io_msix_entry *s2io_entries;
-	char desc1[35];
-	char desc2[35];
+	char desc[MAX_REQUESTED_MSI_X][25];
 
 	int avail_msix_vectors; /* No. of MSI-X vectors granted by system */
 
@@ -1002,7 +1001,7 @@ static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag);
 static struct ethtool_ops netdev_ethtool_ops;
 static void s2io_set_link(unsigned long data);
 static int s2io_set_swapper(nic_t * sp);
-static void s2io_card_down(nic_t *nic, int flag);
+static void s2io_card_down(nic_t *nic);
 static int s2io_card_up(nic_t *nic);
 static int get_xena_rev_id(struct pci_dev *pdev);
 static void restore_xmsi_data(nic_t *nic);
diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h
index 2b19f8a..7f8e6d0 100644
--- a/drivers/net/sk98lin/h/xmac_ii.h
+++ b/drivers/net/sk98lin/h/xmac_ii.h
@@ -1473,7 +1473,7 @@ extern "C" {
 #define GM_TXCR_FORCE_JAM	(1<<15)	/* Bit 15:	Force Jam / Flow-Control */
 #define GM_TXCR_CRC_DIS		(1<<14)	/* Bit 14:	Disable insertion of CRC */
 #define GM_TXCR_PAD_DIS		(1<<13)	/* Bit 13:	Disable padding of packets */
-#define GM_TXCR_COL_THR_MSK	(1<<10)	/* Bit 12..10:	Collision Threshold */
+#define GM_TXCR_COL_THR_MSK	(7<<10)	/* Bit 12..10:	Collision Threshold */
 
 #define TX_COL_THR(x)		(SHIFT10(x) & GM_TXCR_COL_THR_MSK)
 
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index ed19ff4..593387b 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -1734,11 +1734,11 @@ enum {
 	GM_TXCR_FORCE_JAM	= 1<<15, /* Bit 15:	Force Jam / Flow-Control */
 	GM_TXCR_CRC_DIS		= 1<<14, /* Bit 14:	Disable insertion of CRC */
 	GM_TXCR_PAD_DIS		= 1<<13, /* Bit 13:	Disable padding of packets */
-	GM_TXCR_COL_THR_MSK	= 1<<10, /* Bit 12..10:	Collision Threshold */
+	GM_TXCR_COL_THR_MSK	= 7<<10, /* Bit 12..10:	Collision Threshold */
 };
 
 #define TX_COL_THR(x)		(((x)<<10) & GM_TXCR_COL_THR_MSK)
-#define TX_COL_DEF		0x04
+#define TX_COL_DEF		0x04	/* late collision after 64 byte */
 
 /*	GM_RX_CTRL			16 bit r/w	Receive Control Register */
 enum {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 418f169..d98f28c 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -65,6 +65,7 @@
 #define RX_MAX_PENDING		(RX_LE_SIZE/2 - 2)
 #define RX_DEF_PENDING		RX_MAX_PENDING
 #define RX_SKB_ALIGN		8
+#define RX_BUF_WRITE		16
 
 #define TX_RING_SIZE		512
 #define TX_DEF_PENDING		(TX_RING_SIZE - 1)
@@ -234,7 +235,6 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 		}
 
 		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-			sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
 			sky2_pci_write32(hw, PCI_DEV_REG3, 0);
 			reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
 			reg1 &= P_ASPM_CONTROL_MSK;
@@ -243,6 +243,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 		}
 
 		sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+		udelay(100);
 
 		break;
 
@@ -255,6 +256,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 		else
 			reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
 		sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+		udelay(100);
 
 		if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
 			sky2_write8(hw, B2_Y2_CLK_GATE, 0);
@@ -1159,7 +1161,7 @@ static unsigned tx_le_req(const struct sk_buff *skb)
 	count = sizeof(dma_addr_t) / sizeof(u32);
 	count += skb_shinfo(skb)->nr_frags * count;
 
-	if (skb_shinfo(skb)->gso_size)
+	if (skb_is_gso(skb))
 		++count;
 
 	if (skb->ip_summed == CHECKSUM_HW)
@@ -1389,7 +1391,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 	}
 
 	sky2->tx_cons = put;
-	if (tx_avail(sky2) > MAX_SKB_TX_LE)
+	if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
 		netif_wake_queue(dev);
 }
 
@@ -1888,9 +1890,6 @@ resubmit:
 	re->skb->ip_summed = CHECKSUM_NONE;
 	sky2_rx_add(sky2, re->mapaddr);
 
-	/* Tell receiver about new buffers. */
-	sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put);
-
 	return skb;
 
 oversize:
@@ -1937,7 +1936,9 @@ static inline int sky2_more_work(const struct sky2_hw *hw)
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
+	struct sky2_port *sky2;
 	int work_done = 0;
+	unsigned buf_write[2] = { 0, 0 };
 	u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
 
 	rmb();
@@ -1945,7 +1946,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 	while (hw->st_idx != hwidx) {
 		struct sky2_status_le *le  = hw->st_le + hw->st_idx;
 		struct net_device *dev;
-		struct sky2_port *sky2;
 		struct sk_buff *skb;
 		u32 status;
 		u16 length;
@@ -1978,6 +1978,14 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 #endif
 				netif_receive_skb(skb);
 
+			/* Update receiver after 16 frames */
+			if (++buf_write[le->link] == RX_BUF_WRITE) {
+				sky2_put_idx(hw, rxqaddr[le->link],
+					     sky2->rx_put);
+				buf_write[le->link] = 0;
+			}
+
+			/* Stop after net poll weight */
 			if (++work_done >= to_do)
 				goto exit_loop;
 			break;
@@ -2016,6 +2024,16 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 	}
 
 exit_loop:
+	if (buf_write[0]) {
+		sky2 = netdev_priv(hw->dev[0]);
+		sky2_put_idx(hw, Q_R1, sky2->rx_put);
+	}
+
+	if (buf_write[1]) {
+		sky2 = netdev_priv(hw->dev[1]);
+		sky2_put_idx(hw, Q_R2, sky2->rx_put);
+	}
+
 	return work_done;
 }
 
@@ -2286,7 +2304,7 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
 }
 
 
-static int __devinit sky2_reset(struct sky2_hw *hw)
+static int sky2_reset(struct sky2_hw *hw)
 {
 	u16 status;
 	u8 t8, pmd_type;
@@ -3437,17 +3455,14 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 		return -EINVAL;
 
 	del_timer_sync(&hw->idle_timer);
+	netif_poll_disable(hw->dev[0]);
 
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
 
-		if (dev) {
-			if (!netif_running(dev))
-				continue;
-
+		if (netif_running(dev)) {
 			sky2_down(dev);
 			netif_device_detach(dev);
-			netif_poll_disable(dev);
 		}
 	}
 
@@ -3474,9 +3489,8 @@ static int sky2_resume(struct pci_dev *pdev)
 
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
-		if (dev && netif_running(dev)) {
+		if (netif_running(dev)) {
 			netif_device_attach(dev);
-			netif_poll_enable(dev);
 
 			err = sky2_up(dev);
 			if (err) {
@@ -3488,6 +3502,7 @@ static int sky2_resume(struct pci_dev *pdev)
 		}
 	}
 
+	netif_poll_enable(hw->dev[0]);
 	sky2_idle_start(hw);
 out:
 	return err;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 8a0bc55..2db8d19 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1480,7 +1480,7 @@ enum {
 	GM_TXCR_FORCE_JAM	= 1<<15, /* Bit 15:	Force Jam / Flow-Control */
 	GM_TXCR_CRC_DIS		= 1<<14, /* Bit 14:	Disable insertion of CRC */
 	GM_TXCR_PAD_DIS		= 1<<13, /* Bit 13:	Disable padding of packets */
-	GM_TXCR_COL_THR_MSK	= 1<<10, /* Bit 12..10:	Collision Threshold */
+	GM_TXCR_COL_THR_MSK	= 7<<10, /* Bit 12..10:	Collision Threshold */
 };
 
 #define TX_COL_THR(x)		(((x)<<10) & GM_TXCR_COL_THR_MSK)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index b402804..4ec4b4d 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -354,6 +354,24 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 
 #define SMC_IRQ_FLAGS		(0)
 
+#elif	defined(CONFIG_ARCH_VERSATILE)
+
+#define SMC_CAN_USE_8BIT	1
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	1
+#define SMC_NOWAIT		1
+
+#define SMC_inb(a, r)		readb((a) + (r))
+#define SMC_inw(a, r)		readw((a) + (r))
+#define SMC_inl(a, r)		readl((a) + (r))
+#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
+#define SMC_outw(v, a, r)	writew(v, (a) + (r))
+#define SMC_outl(v, a, r)	writel(v, (a) + (r))
+#define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
+#define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
+
+#define SMC_IRQ_FLAGS		(0)
+
 #else
 
 #define SMC_CAN_USE_8BIT	1
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f645921..ce6f3be 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -10078,6 +10078,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	static struct pci_device_id write_reorder_chipsets[] = {
 		{ PCI_DEVICE(PCI_VENDOR_ID_AMD,
 		             PCI_DEVICE_ID_AMD_FE_GATE_700C) },
+		{ PCI_DEVICE(PCI_VENDOR_ID_AMD,
+		             PCI_DEVICE_ID_AMD_8131_BRIDGE) },
 		{ PCI_DEVICE(PCI_VENDOR_ID_VIA,
 			     PCI_DEVICE_ID_VIA_8385_0) },
 		{ },
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 063816f2..4103c37 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -805,7 +805,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
 	 * If problems develop with TSO, check this first.
 	 */
 	numDesc = skb_shinfo(skb)->nr_frags + 1;
-	if(skb_tso_size(skb))
+	if (skb_is_gso(skb))
 		numDesc++;
 
 	/* When checking for free space in the ring, we need to also
@@ -845,7 +845,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
 				TYPHOON_TX_PF_VLAN_TAG_SHIFT);
 	}
 
-	if(skb_tso_size(skb)) {
+	if (skb_is_gso(skb)) {
 		first_txd->processFlags |= TYPHOON_TX_PF_TCP_SEGMENT;
 		first_txd->numDesc++;
 
diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c
index c92ac9f..2c09ec9 100644
--- a/drivers/net/wan/c101.c
+++ b/drivers/net/wan/c101.c
@@ -116,27 +116,33 @@ static inline void openwin(card_t *card, u8 page)
 #include "hd6457x.c"
 
 
+static inline void set_carrier(port_t *port)
+{
+	if (!sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD)
+		netif_carrier_on(port_to_dev(port));
+	else
+		netif_carrier_off(port_to_dev(port));
+}
+
+
 static void sca_msci_intr(port_t *port)
 {
-	struct net_device *dev = port_to_dev(port);
-	card_t* card = port_to_card(port);
-	u8 stat = sca_in(MSCI1_OFFSET + ST1, card); /* read MSCI ST1 status */
+	u8 stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI ST1 status */
 
 	/* Reset MSCI TX underrun status bit */
-	sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, card);
+	sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, port);
 
 	if (stat & ST1_UDRN) {
-		struct net_device_stats *stats = hdlc_stats(dev);
+		struct net_device_stats *stats = hdlc_stats(port_to_dev(port));
 		stats->tx_errors++; /* TX Underrun error detected */
 		stats->tx_fifo_errors++;
 	}
 
 	/* Reset MSCI CDCD status bit - uses ch#2 DCD input */
-	sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, card);
+	sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port);
 
 	if (stat & ST1_CDCD)
-		hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, card) & ST3_DCD),
-				 dev);
+		set_carrier(port);
 }
 
 
@@ -190,7 +196,7 @@ static int c101_open(struct net_device *dev)
 	sca_out(IE1_UDRN, MSCI0_OFFSET + IE1, port);
 	sca_out(IE0_TXINT, MSCI0_OFFSET + IE0, port);
 
-	hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD), dev);
+	set_carrier(port);
 	printk(KERN_DEBUG "0x%X\n", sca_in(MSCI1_OFFSET + ST3, port));
 
 	/* enable MSCI1 CDCD interrupt */
@@ -378,7 +384,7 @@ static int __init c101_run(unsigned long irq, unsigned long winbase)
 	}
 
 	sca_init_sync_port(card); /* Set up C101 memory */
-	hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, card) & ST3_DCD), dev);
+	set_carrier(card);
 
 	printk(KERN_INFO "%s: Moxa C101 on IRQ%u,"
 	       " using %u TX + %u RX packets rings\n",
diff --git a/drivers/net/wan/hd6457x.c b/drivers/net/wan/hd6457x.c
index d374332..dce2bb3 100644
--- a/drivers/net/wan/hd6457x.c
+++ b/drivers/net/wan/hd6457x.c
@@ -168,6 +168,23 @@ static inline u32 buffer_offset(port_t *port, u16 desc, int transmit)
 }
 
 
+static inline void sca_set_carrier(port_t *port)
+{
+	if (!(sca_in(get_msci(port) + ST3, port_to_card(port)) & ST3_DCD)) {
+#ifdef DEBUG_LINK
+		printk(KERN_DEBUG "%s: sca_set_carrier on\n",
+		       port_to_dev(port)->name);
+#endif
+		netif_carrier_on(port_to_dev(port));
+	} else {
+#ifdef DEBUG_LINK
+		printk(KERN_DEBUG "%s: sca_set_carrier off\n",
+		       port_to_dev(port)->name);
+#endif
+		netif_carrier_off(port_to_dev(port));
+	}
+}
+
 
 static void sca_init_sync_port(port_t *port)
 {
@@ -237,9 +254,7 @@ static void sca_init_sync_port(port_t *port)
 			sca_out(DIR_BOFE, DIR_TX(phy_node(port)), card);
 		}
 	}
-
-	hdlc_set_carrier(!(sca_in(get_msci(port) + ST3, card) & ST3_DCD),
-			 port_to_dev(port));
+	sca_set_carrier(port);
 }
 
 
@@ -262,8 +277,7 @@ static inline void sca_msci_intr(port_t *port)
 	}
 
 	if (stat & ST1_CDCD)
-		hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD),
-				 port_to_dev(port));
+		sca_set_carrier(port);
 }
 #endif
 
@@ -566,7 +580,7 @@ static void sca_open(struct net_device *dev)
    - all DMA interrupts
 */
 
-	hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD), dev);
+	sca_set_carrier(port);
 
 #ifdef __HD64570_H
 	/* MSCI TX INT and RX INT A IRQ enable */
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index 1fd0466..f289dab 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -192,9 +192,7 @@ static int cisco_rx(struct sk_buff *skb)
 					       "uptime %ud%uh%um%us)\n",
 					       dev->name, days, hrs,
 					       min, sec);
-#if 0
-					netif_carrier_on(dev);
-#endif
+					netif_dormant_off(dev);
 					hdlc->state.cisco.up = 1;
 				}
 			}
@@ -227,9 +225,7 @@ static void cisco_timer(unsigned long arg)
 		       hdlc->state.cisco.settings.timeout * HZ)) {
 		hdlc->state.cisco.up = 0;
 		printk(KERN_INFO "%s: Link down\n", dev->name);
-#if 0
-		netif_carrier_off(dev);
-#endif
+		netif_dormant_on(dev);
 	}
 
 	cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
@@ -265,10 +261,7 @@ static void cisco_stop(struct net_device *dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	del_timer_sync(&hdlc->state.cisco.timer);
-#if 0
-	if (netif_carrier_ok(dev))
-		netif_carrier_off(dev);
-#endif
+	netif_dormant_on(dev);
 	hdlc->state.cisco.up = 0;
 	hdlc->state.cisco.request_sent = 0;
 }
@@ -328,6 +321,7 @@ int hdlc_cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 		dev->type = ARPHRD_CISCO;
 		dev->flags = IFF_POINTOPOINT | IFF_NOARP;
 		dev->addr_len = 0;
+		netif_dormant_on(dev);
 		return 0;
 	}
 
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 523afe1..7bb737b 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -301,7 +301,7 @@ static int pvc_open(struct net_device *dev)
 	if (pvc->open_count++ == 0) {
 		hdlc_device *hdlc = dev_to_hdlc(pvc->master);
 		if (hdlc->state.fr.settings.lmi == LMI_NONE)
-			pvc->state.active = hdlc->carrier;
+			pvc->state.active = netif_carrier_ok(pvc->master);
 
 		pvc_carrier(pvc->state.active, pvc);
 		hdlc->state.fr.dce_changed = 1;
@@ -545,11 +545,7 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
 
 	hdlc->state.fr.reliable = reliable;
 	if (reliable) {
-#if 0
-		if (!netif_carrier_ok(dev))
-			netif_carrier_on(dev);
-#endif
-
+		netif_dormant_off(dev);
 		hdlc->state.fr.n391cnt = 0; /* Request full status */
 		hdlc->state.fr.dce_changed = 1;
 
@@ -562,11 +558,7 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
 			}
 		}
 	} else {
-#if 0
-		if (netif_carrier_ok(dev))
-			netif_carrier_off(dev);
-#endif
-
+		netif_dormant_on(dev);
 		while (pvc) {		/* Deactivate all PVCs */
 			pvc_carrier(0, pvc);
 			pvc->state.exist = pvc->state.active = 0;
diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c
index b7da551..04ca1f7 100644
--- a/drivers/net/wan/hdlc_generic.c
+++ b/drivers/net/wan/hdlc_generic.c
@@ -34,10 +34,11 @@
 #include <linux/inetdevice.h>
 #include <linux/lapb.h>
 #include <linux/rtnetlink.h>
+#include <linux/notifier.h>
 #include <linux/hdlc.h>
 
 
-static const char* version = "HDLC support module revision 1.18";
+static const char* version = "HDLC support module revision 1.19";
 
 #undef DEBUG_LINK
 
@@ -73,57 +74,51 @@ static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev,
 
 
 
-static void __hdlc_set_carrier_on(struct net_device *dev)
+static inline void hdlc_proto_start(struct net_device *dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	if (hdlc->proto.start)
 		return hdlc->proto.start(dev);
-#if 0
-#ifdef DEBUG_LINK
-	if (netif_carrier_ok(dev))
-		printk(KERN_ERR "hdlc_set_carrier_on(): already on\n");
-#endif
-	netif_carrier_on(dev);
-#endif
 }
 
 
 
-static void __hdlc_set_carrier_off(struct net_device *dev)
+static inline void hdlc_proto_stop(struct net_device *dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	if (hdlc->proto.stop)
 		return hdlc->proto.stop(dev);
-
-#if 0
-#ifdef DEBUG_LINK
-	if (!netif_carrier_ok(dev))
-		printk(KERN_ERR "hdlc_set_carrier_off(): already off\n");
-#endif
-	netif_carrier_off(dev);
-#endif
 }
 
 
 
-void hdlc_set_carrier(int on, struct net_device *dev)
+static int hdlc_device_event(struct notifier_block *this, unsigned long event,
+			     void *ptr)
 {
-	hdlc_device *hdlc = dev_to_hdlc(dev);
+	struct net_device *dev = ptr;
+	hdlc_device *hdlc;
 	unsigned long flags;
-	on = on ? 1 : 0;
+	int on;
+ 
+	if (dev->get_stats != hdlc_get_stats)
+		return NOTIFY_DONE; /* not an HDLC device */
+ 
+	if (event != NETDEV_CHANGE)
+		return NOTIFY_DONE; /* Only interrested in carrier changes */
+
+	on = netif_carrier_ok(dev);
 
 #ifdef DEBUG_LINK
-	printk(KERN_DEBUG "hdlc_set_carrier %i\n", on);
+	printk(KERN_DEBUG "%s: hdlc_device_event NETDEV_CHANGE, carrier %i\n",
+	       dev->name, on);
 #endif
 
+	hdlc = dev_to_hdlc(dev);
 	spin_lock_irqsave(&hdlc->state_lock, flags);
 
 	if (hdlc->carrier == on)
 		goto carrier_exit; /* no change in DCD line level */
 
-#ifdef DEBUG_LINK
-	printk(KERN_INFO "%s: carrier %s\n", dev->name, on ? "ON" : "off");
-#endif
 	hdlc->carrier = on;
 
 	if (!hdlc->open)
@@ -131,14 +126,15 @@ void hdlc_set_carrier(int on, struct net_device *dev)
 
 	if (hdlc->carrier) {
 		printk(KERN_INFO "%s: Carrier detected\n", dev->name);
-		__hdlc_set_carrier_on(dev);
+		hdlc_proto_start(dev);
 	} else {
 		printk(KERN_INFO "%s: Carrier lost\n", dev->name);
-		__hdlc_set_carrier_off(dev);
+		hdlc_proto_stop(dev);
 	}
 
 carrier_exit:
 	spin_unlock_irqrestore(&hdlc->state_lock, flags);
+	return NOTIFY_DONE;
 }
 
 
@@ -165,7 +161,7 @@ int hdlc_open(struct net_device *dev)
 
 	if (hdlc->carrier) {
 		printk(KERN_INFO "%s: Carrier detected\n", dev->name);
-		__hdlc_set_carrier_on(dev);
+		hdlc_proto_start(dev);
 	} else
 		printk(KERN_INFO "%s: No carrier\n", dev->name);
 
@@ -190,7 +186,7 @@ void hdlc_close(struct net_device *dev)
 
 	hdlc->open = 0;
 	if (hdlc->carrier)
-		__hdlc_set_carrier_off(dev);
+		hdlc_proto_stop(dev);
 
 	spin_unlock_irq(&hdlc->state_lock);
 
@@ -303,7 +299,6 @@ MODULE_LICENSE("GPL v2");
 
 EXPORT_SYMBOL(hdlc_open);
 EXPORT_SYMBOL(hdlc_close);
-EXPORT_SYMBOL(hdlc_set_carrier);
 EXPORT_SYMBOL(hdlc_ioctl);
 EXPORT_SYMBOL(hdlc_setup);
 EXPORT_SYMBOL(alloc_hdlcdev);
@@ -315,9 +310,18 @@ static struct packet_type hdlc_packet_type = {
 };
 
 
+static struct notifier_block hdlc_notifier = {
+        .notifier_call = hdlc_device_event,
+};
+
+
 static int __init hdlc_module_init(void)
 {
+	int result;
+
 	printk(KERN_INFO "%s\n", version);
+	if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0)
+                return result;
         dev_add_pack(&hdlc_packet_type);
 	return 0;
 }
@@ -327,6 +331,7 @@ static int __init hdlc_module_init(void)
 static void __exit hdlc_module_exit(void)
 {
 	dev_remove_pack(&hdlc_packet_type);
+	unregister_netdevice_notifier(&hdlc_notifier);
 }
 
 
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index d564224..b2031df 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -149,7 +149,10 @@ static inline void wanxl_cable_intr(port_t *port)
 	printk(KERN_INFO "%s: %s%s module, %s cable%s%s\n",
 	       port->dev->name, pm, dte, cable, dsr, dcd);
 
-	hdlc_set_carrier(value & STATUS_CABLE_DCD, port->dev);
+	if (value & STATUS_CABLE_DCD)
+		netif_carrier_on(port->dev);
+	else
+		netif_carrier_off(port->dev);
 }
 
 
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index e1c5a93..3889f79 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -1547,7 +1547,7 @@ static void handle_irq_noise(struct bcm43xx_private *bcm)
 		goto generate_new;
 
 	/* Get the noise samples. */
-	assert(bcm->noisecalc.nr_samples <= 8);
+	assert(bcm->noisecalc.nr_samples < 8);
 	i = bcm->noisecalc.nr_samples;
 	noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
 	noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 1546527..7f78b78 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -34,8 +34,6 @@
 
 #include "orinoco.h"
 
-static unsigned char *primsym;
-static unsigned char *secsym;
 static const char primary_fw_name[] = "symbol_sp24t_prim_fw";
 static const char secondary_fw_name[] = "symbol_sp24t_sec_fw";
 
@@ -440,7 +438,7 @@ spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block)
  */
 static int
 spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
-		  const unsigned char *image)
+		  const unsigned char *image, int secondary)
 {
 	int ret;
 	const unsigned char *ptr;
@@ -455,7 +453,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
 	first_block = (const struct dblock *) ptr;
 
 	/* Read the PDA */
-	if (image != primsym) {
+	if (secondary) {
 		ret = spectrum_read_pda(hw, pda, sizeof(pda));
 		if (ret)
 			return ret;
@@ -472,7 +470,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
 		return ret;
 
 	/* Write the PDA to the adapter */
-	if (image != primsym) {
+	if (secondary) {
 		ret = spectrum_apply_pda(hw, first_block, pda);
 		if (ret)
 			return ret;
@@ -487,7 +485,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
 	ret = hermes_init(hw);
 
 	/* hermes_reset() should return 0 with the secondary firmware */
-	if (image != primsym && ret != 0)
+	if (secondary && ret != 0)
 		return -ENODEV;
 
 	/* And this should work with any firmware */
@@ -509,33 +507,30 @@ spectrum_dl_firmware(hermes_t *hw, struct pcmcia_device *link)
 	const struct firmware *fw_entry;
 
 	if (request_firmware(&fw_entry, primary_fw_name,
-			     &handle_to_dev(link)) == 0) {
-		primsym = fw_entry->data;
-	} else {
+			     &handle_to_dev(link)) != 0) {
 		printk(KERN_ERR PFX "Cannot find firmware: %s\n",
 		       primary_fw_name);
 		return -ENOENT;
 	}
 
-	if (request_firmware(&fw_entry, secondary_fw_name,
-			     &handle_to_dev(link)) == 0) {
-		secsym = fw_entry->data;
-	} else {
-		printk(KERN_ERR PFX "Cannot find firmware: %s\n",
-		       secondary_fw_name);
-		return -ENOENT;
-	}
-
 	/* Load primary firmware */
-	ret = spectrum_dl_image(hw, link, primsym);
+	ret = spectrum_dl_image(hw, link, fw_entry->data, 0);
+	release_firmware(fw_entry);
 	if (ret) {
 		printk(KERN_ERR PFX "Primary firmware download failed\n");
 		return ret;
 	}
 
-	/* Load secondary firmware */
-	ret = spectrum_dl_image(hw, link, secsym);
+	if (request_firmware(&fw_entry, secondary_fw_name,
+			     &handle_to_dev(link)) != 0) {
+		printk(KERN_ERR PFX "Cannot find firmware: %s\n",
+		       secondary_fw_name);
+		return -ENOENT;
+	}
 
+	/* Load secondary firmware */
+	ret = spectrum_dl_image(hw, link, fw_entry->data, 1);
+	release_firmware(fw_entry);
 	if (ret) {
 		printk(KERN_ERR PFX "Secondary firmware download failed\n");
 	}
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index ce1cb2c..72f9052 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -375,10 +375,8 @@ static void int_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
 	case -ENODEV:
 	case -ENOENT:
 	case -ECONNRESET:
-		goto kfree;
 	case -EPIPE:
-		usb_clear_halt(urb->dev, EP_INT_IN);
-		/* FALL-THROUGH */
+		goto kfree;
 	default:
 		goto resubmit;
 	}
@@ -580,10 +578,8 @@ static void rx_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
 	case -ENODEV:
 	case -ENOENT:
 	case -ECONNRESET:
-		return;
 	case -EPIPE:
-		usb_clear_halt(urb->dev, EP_DATA_IN);
-		/* FALL-THROUGH */
+		return;
 	default:
 		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
 		goto resubmit;
@@ -749,11 +745,9 @@ static void tx_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
 	case -ENODEV:
 	case -ENOENT:
 	case -ECONNRESET:
+	case -EPIPE:
 		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
 		break;
-	case -EPIPE:
-		usb_clear_halt(urb->dev, EP_DATA_OUT);
-		/* FALL-THROUGH */
 	default:
 		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
 		goto resubmit;
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 222a1cc..3fae77f 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -6,8 +6,7 @@ menu "PCI Hotplug Support"
 
 config HOTPLUG_PCI
 	tristate "Support for PCI Hotplug (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select HOTPLUG
+	depends on PCI && EXPERIMENTAL && HOTPLUG
 	---help---
 	  Say Y here if you have a motherboard with a PCI Hotplug controller.
 	  This allows you to add and remove PCI cards while the machine is
@@ -77,7 +76,7 @@ config HOTPLUG_PCI_IBM
 
 config HOTPLUG_PCI_ACPI
 	tristate "ACPI PCI Hotplug driver"
-	depends on ACPI && HOTPLUG_PCI
+	depends on ACPI_DOCK && HOTPLUG_PCI
 	help
 	  Say Y here if you have a system that supports PCI Hotplug using
 	  ACPI.
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 36bc7c4..a83c1f5 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -47,13 +47,13 @@ msi_register(struct msi_ops *ops)
 
 static void msi_cache_ctor(void *p, kmem_cache_t *cache, unsigned long flags)
 {
-	memset(p, 0, NR_IRQS * sizeof(struct msi_desc));
+	memset(p, 0, sizeof(struct msi_desc));
 }
 
 static int msi_cache_init(void)
 {
 	msi_cachep = kmem_cache_create("msi_cache",
-			NR_IRQS * sizeof(struct msi_desc),
+			sizeof(struct msi_desc),
 		       	0, SLAB_HWCACHE_ALIGN, msi_cache_ctor, NULL);
 	if (!msi_cachep)
 		return -ENOMEM;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index cf57d7d..9f79dd6 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -19,6 +19,7 @@
 #include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
 
+unsigned int pci_pm_d3_delay = 10;
 
 /**
  * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
@@ -313,6 +314,14 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 	} else if (dev->current_state == state)
 		return 0;        /* we're already there */
 
+	/*
+	 * If the device or the parent bridge can't support PCI PM, ignore
+	 * the request if we're doing anything besides putting it into D0
+	 * (which would only happen on boot).
+	 */
+	if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
+		return 0;
+
 	/* find PCI PM capability in list */
 	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
 	
@@ -363,7 +372,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 	/* Mandatory power management transition delays */
 	/* see PCI PM 1.1 5.6.1 table 18 */
 	if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
-		msleep(10);
+		msleep(pci_pm_d3_delay);
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
 		udelay(200);
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 9cc842b..08d58fc 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -47,7 +47,7 @@ extern int pci_msi_quirk;
 #else
 #define pci_msi_quirk 0
 #endif
-
+extern unsigned int pci_pm_d3_delay;
 #ifdef CONFIG_PCI_MSI
 void disable_msi_mode(struct pci_dev *dev, int pos, int type);
 void pci_no_msi(void);
@@ -66,7 +66,15 @@ static inline int pci_save_msix_state(struct pci_dev *dev) { return 0; }
 static inline void pci_restore_msi_state(struct pci_dev *dev) {}
 static inline void pci_restore_msix_state(struct pci_dev *dev) {}
 #endif
+static inline int pci_no_d1d2(struct pci_dev *dev)
+{
+	unsigned int parent_dstates = 0;
 
+	if (dev->bus->self)
+		parent_dstates = dev->bus->self->no_d1d2;
+	return (dev->no_d1d2 || parent_dstates);
+
+}
 extern int pcie_mch_quirk;
 extern struct device_attribute pci_dev_attrs[];
 extern struct class_device_attribute class_device_attr_cpuaffinity;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index f89dbc3..c5a58d1 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -815,6 +815,7 @@ pci_scan_device(struct pci_bus *bus, int devfn)
 	dev->vendor = l & 0xffff;
 	dev->device = (l >> 16) & 0xffff;
 	dev->cfg_size = pci_cfg_space_size(dev);
+	dev->error_state = pci_channel_io_normal;
 
 	/* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
 	   set this higher, assuming the system even supports it.  */
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index d1d7333..e3c78c3 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -400,6 +400,7 @@ static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
 	piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82371AB_3,	quirk_piix4_acpi );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82443MX_3,	quirk_piix4_acpi );
 
 /*
  * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
@@ -682,6 +683,33 @@ static void __devinit quirk_vt82c598_id(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C597_0,	quirk_vt82c598_id );
 
+#ifdef CONFIG_ACPI_SLEEP
+
+/*
+ * Some VIA systems boot with the abnormal status flag set. This can cause
+ * the BIOS to re-POST the system on resume rather than passing control
+ * back to the OS.  Clear the flag on boot
+ */
+static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev)
+{
+	u32 reg;
+
+	acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
+				&reg);
+
+	if (reg & 0x800) {
+		printk("Clearing abnormal poweroff flag\n");
+		acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
+					ACPI_REGISTER_PM1_STATUS,
+					(u16)0x800);
+	}
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff);
+
+#endif
+
 /*
  * CardBus controllers have a legacy base address that enables them
  * to respond as i82365 pcmcia controllers.  We don't want them to
@@ -1174,6 +1202,55 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_962,		quirk_sis_96x_
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_963,		quirk_sis_96x_smbus );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_LPC,		quirk_sis_96x_smbus );
 
+#if defined(CONFIG_SCSI_SATA) || defined(CONFIG_SCSI_SATA_MODULE)
+
+/*
+ *	If we are using libata we can drive this chip properly but must
+ *	do this early on to make the additional device appear during
+ *	the PCI scanning.
+ */
+
+static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev)
+{
+	u32 conf;
+	u8 hdr;
+
+	/* Only poke fn 0 */
+	if (PCI_FUNC(pdev->devfn))
+		return;
+
+	switch(pdev->device) {
+		case PCI_DEVICE_ID_JMICRON_JMB365:
+		case PCI_DEVICE_ID_JMICRON_JMB366:
+			/* Redirect IDE second PATA port to the right spot */
+			pci_read_config_dword(pdev, 0x80, &conf);
+			conf |= (1 << 24);
+			/* Fall through */
+			pci_write_config_dword(pdev, 0x80, conf);
+		case PCI_DEVICE_ID_JMICRON_JMB361:
+		case PCI_DEVICE_ID_JMICRON_JMB363:
+			pci_read_config_dword(pdev, 0x40, &conf);
+			/* Enable dual function mode, AHCI on fn 0, IDE fn1 */
+			/* Set the class codes correctly and then direct IDE 0 */
+			conf &= ~0x000F0200;	/* Clear bit 9 and 16-19 */
+			conf |=  0x00C20002;	/* Set bit 1, 17, 22, 23 */
+			pci_write_config_dword(pdev, 0x40, conf);
+
+			/* Reconfigure so that the PCI scanner discovers the
+			   device is now multifunction */
+
+			pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
+			pdev->hdr_type = hdr & 0x7f;
+			pdev->multifunction = !!(hdr & 0x80);
+
+			break;
+	}
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
+
+#endif
+
 #ifdef CONFIG_X86_IO_APIC
 static void __init quirk_alder_ioapic(struct pci_dev *pdev)
 {
@@ -1341,6 +1418,37 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXH_0,	quirk_pc
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXH_1,	quirk_pcie_pxh);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXHV,	quirk_pcie_pxh);
 
+/*
+ * Some Intel PCI Express chipsets have trouble with downstream
+ * device power management.
+ */
+static void quirk_intel_pcie_pm(struct pci_dev * dev)
+{
+	pci_pm_d3_delay = 120;
+	dev->no_d1d2 = 1;
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e2, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e3, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e4, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e5, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e6, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25f7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25f8, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25f9, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25fa, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2601, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2602, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2603, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2604, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2605, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2606, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2607, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2608, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2609, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260a, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260b, quirk_intel_pcie_pm);
 
 /*
  * Fixup the cardbus bridges on the IBM Dock II docking station
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 61cb4b2..35f8864 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -6,7 +6,7 @@ menu "PCCARD (PCMCIA/CardBus) support"
 
 config PCCARD
 	tristate "PCCard (PCMCIA/CardBus) support"
-	select HOTPLUG
+	depends on HOTPLUG
 	---help---
 	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
 	  computer.  These are credit-card size devices such as network cards,
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index f5b9f18..7ff1d88 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -121,6 +121,16 @@ config RTC_DRV_DS1553
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ds1553.
 
+config RTC_DRV_ISL1208
+	tristate "Intersil 1208"
+	depends on RTC_CLASS && I2C
+	help
+	  If you say yes here you get support for the
+	  Intersil 1208 RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-isl1208.
+
 config RTC_DRV_DS1672
 	tristate "Dallas/Maxim DS1672"
 	depends on RTC_CLASS && I2C
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 5422071..bbcfb09 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_RTC_INTF_PROC)	+= rtc-proc.o
 obj-$(CONFIG_RTC_INTF_DEV)	+= rtc-dev.o
 
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
+obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
 obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
 obj-$(CONFIG_RTC_DRV_DS1307)	+= rtc-ds1307.o
 obj-$(CONFIG_RTC_DRV_DS1672)	+= rtc-ds1672.o
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
new file mode 100644
index 0000000..f324d0a
--- /dev/null
+++ b/drivers/rtc/rtc-isl1208.c
@@ -0,0 +1,591 @@
+/*
+ * Intersil ISL1208 rtc class driver
+ *
+ * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+
+#define DRV_NAME "isl1208"
+#define DRV_VERSION "0.2"
+
+/* Register map */
+/* rtc section */
+#define ISL1208_REG_SC  0x00
+#define ISL1208_REG_MN  0x01
+#define ISL1208_REG_HR  0x02
+#define ISL1208_REG_HR_MIL     (1<<7) /* 24h/12h mode */
+#define ISL1208_REG_HR_PM      (1<<5) /* PM/AM bit in 12h mode */
+#define ISL1208_REG_DT  0x03
+#define ISL1208_REG_MO  0x04
+#define ISL1208_REG_YR  0x05
+#define ISL1208_REG_DW  0x06
+#define ISL1208_RTC_SECTION_LEN 7
+
+/* control/status section */
+#define ISL1208_REG_SR  0x07
+#define ISL1208_REG_SR_ARST    (1<<7) /* auto reset */
+#define ISL1208_REG_SR_XTOSCB  (1<<6) /* crystal oscillator */
+#define ISL1208_REG_SR_WRTC    (1<<4) /* write rtc */
+#define ISL1208_REG_SR_ALM     (1<<2) /* alarm */
+#define ISL1208_REG_SR_BAT     (1<<1) /* battery */
+#define ISL1208_REG_SR_RTCF    (1<<0) /* rtc fail */
+#define ISL1208_REG_INT 0x08
+#define ISL1208_REG_09  0x09 /* reserved */
+#define ISL1208_REG_ATR 0x0a
+#define ISL1208_REG_DTR 0x0b
+
+/* alarm section */
+#define ISL1208_REG_SCA 0x0c
+#define ISL1208_REG_MNA 0x0d
+#define ISL1208_REG_HRA 0x0e
+#define ISL1208_REG_DTA 0x0f
+#define ISL1208_REG_MOA 0x10
+#define ISL1208_REG_DWA 0x11
+#define ISL1208_ALARM_SECTION_LEN 6
+
+/* user section */
+#define ISL1208_REG_USR1 0x12
+#define ISL1208_REG_USR2 0x13
+#define ISL1208_USR_SECTION_LEN 2
+
+/* i2c configuration */
+#define ISL1208_I2C_ADDR 0xde
+
+static unsigned short normal_i2c[] = {
+	ISL1208_I2C_ADDR>>1, I2C_CLIENT_END
+};
+I2C_CLIENT_INSMOD; /* defines addr_data */
+
+static int isl1208_attach_adapter(struct i2c_adapter *adapter);
+static int isl1208_detach_client(struct i2c_client *client);
+
+static struct i2c_driver isl1208_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+	.id		= I2C_DRIVERID_ISL1208,
+	.attach_adapter = &isl1208_attach_adapter,
+	.detach_client	= &isl1208_detach_client,
+};
+
+/* block read */
+static int
+isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
+		       unsigned len)
+{
+	u8 reg_addr[1] = { reg };
+	struct i2c_msg msgs[2] = {
+		{ client->addr, client->flags, sizeof(reg_addr), reg_addr },
+		{ client->addr, client->flags | I2C_M_RD, len, buf }
+	};
+	int ret;
+
+	BUG_ON(len == 0);
+	BUG_ON(reg > ISL1208_REG_USR2);
+	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	if (ret > 0)
+		ret = 0;
+	return ret;
+}
+
+/* block write */
+static int
+isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
+		       unsigned len)
+{
+	u8 i2c_buf[ISL1208_REG_USR2 + 2];
+	struct i2c_msg msgs[1] = {
+		{ client->addr, client->flags, len + 1, i2c_buf }
+	};
+	int ret;
+
+	BUG_ON(len == 0);
+	BUG_ON(reg > ISL1208_REG_USR2);
+	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+
+	i2c_buf[0] = reg;
+	memcpy(&i2c_buf[1], &buf[0], len);
+
+	ret = i2c_transfer(client->adapter, msgs, 1);
+	if (ret > 0)
+		ret = 0;
+	return ret;
+}
+
+/* simple check to see wether we have a isl1208 */
+static int isl1208_i2c_validate_client(struct i2c_client *client)
+{
+	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+	u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
+		0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
+	};
+	int i;
+	int ret;
+
+	ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
+		if (regs[i] & zero_mask[i]) /* check if bits are cleared */
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int isl1208_i2c_get_sr(struct i2c_client *client)
+{
+	return i2c_smbus_read_byte_data(client, ISL1208_REG_SR) == -1 ? -EIO:0;
+}
+
+static int isl1208_i2c_get_atr(struct i2c_client *client)
+{
+	int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
+
+	if (atr < 0)
+		return -EIO;
+
+	/* The 6bit value in the ATR register controls the load
+	 * capacitance C_load * in steps of 0.25pF
+	 *
+	 * bit (1<<5) of the ATR register is inverted
+	 *
+	 * C_load(ATR=0x20) =  4.50pF
+	 * C_load(ATR=0x00) = 12.50pF
+	 * C_load(ATR=0x1f) = 20.25pF
+	 *
+	 */
+
+	atr &= 0x3f; /* mask out lsb */
+	atr ^= 1<<5; /* invert 6th bit */
+	atr += 2*9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
+
+	return atr;
+}
+
+static int isl1208_i2c_get_dtr(struct i2c_client *client)
+{
+	int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
+
+	if (dtr < 0)
+		return -EIO;
+
+	/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
+	dtr = ((dtr & 0x3) * 20) * (dtr & (1<<2) ? -1 : 1);
+
+	return dtr;
+}
+
+static int isl1208_i2c_get_usr(struct i2c_client *client)
+{
+	u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
+	int ret;
+
+	ret = isl1208_i2c_read_regs (client, ISL1208_REG_USR1, buf,
+				   ISL1208_USR_SECTION_LEN);
+	if (ret < 0)
+		return ret;
+
+	return (buf[1] << 8) | buf[0];
+}
+
+static int isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
+{
+	u8 buf[ISL1208_USR_SECTION_LEN];
+
+	buf[0] = usr & 0xff;
+	buf[1] = (usr >> 8) & 0xff;
+
+	return isl1208_i2c_set_regs (client, ISL1208_REG_USR1, buf,
+				     ISL1208_USR_SECTION_LEN);
+}
+
+static int isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct i2c_client *const client = to_i2c_client(dev);
+	int sr, dtr, atr, usr;
+
+	sr = isl1208_i2c_get_sr(client);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return sr;
+	}
+
+	seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
+		   (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
+		   (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
+		   (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
+		   (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
+		   (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
+		   (sr & ISL1208_REG_SR_ARST) ? " ARST" : "",
+		   sr);
+
+	seq_printf(seq, "batt_status\t: %s\n",
+		   (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
+
+	dtr = isl1208_i2c_get_dtr(client);
+	if (dtr >= 0 -1)
+		seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
+
+	atr = isl1208_i2c_get_atr(client);
+	if (atr >= 0)
+		seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
+			   atr>>2, (atr&0x3)*25);
+
+	usr = isl1208_i2c_get_usr(client);
+	if (usr >= 0)
+		seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
+
+	return 0;
+}
+
+
+static int isl1208_i2c_read_time(struct i2c_client *client,
+				 struct rtc_time *tm)
+{
+	int sr;
+	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+
+	sr = isl1208_i2c_get_sr(client);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return -EIO;
+	}
+
+	sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading RTC section failed\n",
+			__func__);
+		return sr;
+	}
+
+	tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SC]);
+	tm->tm_min = BCD2BIN(regs[ISL1208_REG_MN]);
+	{ /* HR field has a more complex interpretation */
+		const u8 _hr = regs[ISL1208_REG_HR];
+		if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
+			tm->tm_hour = BCD2BIN(_hr & 0x3f);
+		else { // 12h format
+			tm->tm_hour = BCD2BIN(_hr & 0x1f);
+			if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
+				tm->tm_hour += 12;
+		}
+	}
+
+	tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DT]);
+	tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
+	tm->tm_year = BCD2BIN(regs[ISL1208_REG_YR]) + 100;
+	tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DW]);
+
+	return 0;
+}
+
+static int isl1208_i2c_read_alarm(struct i2c_client *client,
+				  struct rtc_wkalrm *alarm)
+{
+	struct rtc_time *const tm = &alarm->time;
+	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
+	int sr;
+
+	sr = isl1208_i2c_get_sr(client);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return sr;
+	}
+
+	sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
+				  ISL1208_ALARM_SECTION_LEN);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading alarm section failed\n",
+			__func__);
+		return sr;
+	}
+
+	/* MSB of each alarm register is an enable bit */
+	tm->tm_sec  = BCD2BIN(regs[ISL1208_REG_SCA-ISL1208_REG_SCA] & 0x7f);
+	tm->tm_min  = BCD2BIN(regs[ISL1208_REG_MNA-ISL1208_REG_SCA] & 0x7f);
+	tm->tm_hour = BCD2BIN(regs[ISL1208_REG_HRA-ISL1208_REG_SCA] & 0x3f);
+	tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DTA-ISL1208_REG_SCA] & 0x3f);
+	tm->tm_mon  = BCD2BIN(regs[ISL1208_REG_MOA-ISL1208_REG_SCA] & 0x1f)-1;
+	tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DWA-ISL1208_REG_SCA] & 0x03);
+
+	return 0;
+}
+
+static int isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return isl1208_i2c_read_time(to_i2c_client(dev), tm);
+}
+
+static int isl1208_i2c_set_time(struct i2c_client *client,
+				struct rtc_time const *tm)
+{
+	int sr;
+	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+
+	regs[ISL1208_REG_SC] = BIN2BCD(tm->tm_sec);
+	regs[ISL1208_REG_MN] = BIN2BCD(tm->tm_min);
+	regs[ISL1208_REG_HR] = BIN2BCD(tm->tm_hour) | ISL1208_REG_HR_MIL;
+
+	regs[ISL1208_REG_DT] = BIN2BCD(tm->tm_mday);
+	regs[ISL1208_REG_MO] = BIN2BCD(tm->tm_mon + 1);
+	regs[ISL1208_REG_YR] = BIN2BCD(tm->tm_year - 100);
+
+	regs[ISL1208_REG_DW] = BIN2BCD(tm->tm_wday & 7);
+
+	sr = isl1208_i2c_get_sr(client);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return sr;
+	}
+
+	/* set WRTC */
+	sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
+				       sr | ISL1208_REG_SR_WRTC);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+		return sr;
+	}
+
+	/* write RTC registers */
+	sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: writing RTC section failed\n",
+			__func__);
+		return sr;
+	}
+
+	/* clear WRTC again */
+	sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
+				       sr & ~ISL1208_REG_SR_WRTC);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+		return sr;
+	}
+
+	return 0;
+}
+
+
+static int isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return isl1208_i2c_set_time(to_i2c_client(dev), tm);
+}
+
+static int isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
+}
+
+static struct rtc_class_ops isl1208_rtc_ops = {
+	.proc		= isl1208_rtc_proc,
+	.read_time	= isl1208_rtc_read_time,
+	.set_time	= isl1208_rtc_set_time,
+	.read_alarm	= isl1208_rtc_read_alarm,
+	//.set_alarm	= isl1208_rtc_set_alarm,
+};
+
+/* sysfs interface */
+
+static ssize_t isl1208_sysfs_show_atrim(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	int atr;
+
+	atr = isl1208_i2c_get_atr(to_i2c_client(dev));
+	if (atr < 0)
+		return atr;
+
+	return sprintf(buf, "%d.%.2d pF\n", atr>>2, (atr&0x3)*25);
+}
+static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
+
+static ssize_t isl1208_sysfs_show_dtrim(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	int dtr;
+
+	dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
+	if (dtr < 0)
+		return dtr;
+
+	return sprintf(buf, "%d ppm\n", dtr);
+}
+static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
+
+static ssize_t isl1208_sysfs_show_usr(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	int usr;
+
+	usr = isl1208_i2c_get_usr(to_i2c_client(dev));
+	if (usr < 0)
+		return usr;
+
+	return sprintf(buf, "0x%.4x\n", usr);
+}
+
+static ssize_t isl1208_sysfs_store_usr(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
+{
+	int usr = -1;
+
+	if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
+		if (sscanf(buf, "%x", &usr) != 1)
+			return -EINVAL;
+	} else {
+		if (sscanf(buf, "%d", &usr) != 1)
+			return -EINVAL;
+	}
+
+	if (usr < 0 || usr > 0xffff)
+		return -EINVAL;
+
+	return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
+}
+static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
+		   isl1208_sysfs_store_usr);
+
+static int
+isl1208_probe(struct i2c_adapter *adapter, int addr, int kind)
+{
+	int rc = 0;
+	struct i2c_client *new_client = NULL;
+	struct rtc_device *rtc = NULL;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+		rc = -ENODEV;
+		goto failout;
+	}
+
+	new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (new_client == NULL) {
+		rc = -ENOMEM;
+		goto failout;
+	}
+
+	new_client->addr = addr;
+	new_client->adapter = adapter;
+	new_client->driver = &isl1208_driver;
+	new_client->flags = 0;
+	strcpy(new_client->name, DRV_NAME);
+
+	if (kind < 0) {
+		rc = isl1208_i2c_validate_client(new_client);
+		if (rc < 0)
+			goto failout;
+	}
+
+	rc = i2c_attach_client(new_client);
+	if (rc < 0)
+		goto failout;
+
+	dev_info(&new_client->dev,
+		 "chip found, driver version " DRV_VERSION "\n");
+
+	rtc = rtc_device_register(isl1208_driver.driver.name,
+				  &new_client->dev,
+				  &isl1208_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc)) {
+		rc = PTR_ERR(rtc);
+		goto failout_detach;
+	}
+
+	i2c_set_clientdata(new_client, rtc);
+
+	rc = isl1208_i2c_get_sr(new_client);
+	if (rc < 0) {
+		dev_err(&new_client->dev, "reading status failed\n");
+		goto failout_unregister;
+	}
+
+	if (rc & ISL1208_REG_SR_RTCF)
+		dev_warn(&new_client->dev, "rtc power failure detected, "
+			 "please set clock.\n");
+
+	rc = device_create_file(&new_client->dev, &dev_attr_atrim);
+	if (rc < 0)
+		goto failout_unregister;
+	rc = device_create_file(&new_client->dev, &dev_attr_dtrim);
+	if (rc < 0)
+		goto failout_atrim;
+	rc = device_create_file(&new_client->dev, &dev_attr_usr);
+	if (rc < 0)
+		goto failout_dtrim;
+
+	return 0;
+
+ failout_dtrim:
+	device_remove_file(&new_client->dev, &dev_attr_dtrim);
+ failout_atrim:
+	device_remove_file(&new_client->dev, &dev_attr_atrim);
+ failout_unregister:
+	rtc_device_unregister(rtc);
+ failout_detach:
+	i2c_detach_client(new_client);
+ failout:
+	kfree(new_client);
+	return rc;
+}
+
+static int
+isl1208_attach_adapter (struct i2c_adapter *adapter)
+{
+	return i2c_probe(adapter, &addr_data, isl1208_probe);
+}
+
+static int
+isl1208_detach_client(struct i2c_client *client)
+{
+	int rc;
+	struct rtc_device *const rtc = i2c_get_clientdata(client);
+
+	if (rtc)
+		rtc_device_unregister(rtc); /* do we need to kfree? */
+
+	rc = i2c_detach_client(client);
+	if (rc)
+		return rc;
+
+	kfree(client);
+
+	return 0;
+}
+
+/* module management */
+
+static int __init isl1208_init(void)
+{
+	return i2c_add_driver(&isl1208_driver);
+}
+
+static void __exit isl1208_exit(void)
+{
+	i2c_del_driver(&isl1208_driver);
+}
+
+MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
+MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(isl1208_init);
+module_exit(isl1208_exit);
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index bb6d5ff2..596764f 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -30,7 +30,7 @@
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
 
 MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
 MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index d729538..7f6fdac 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -394,7 +394,7 @@ dasd_add_busid(char *bus_id, int features)
 	if (!new)
 		return ERR_PTR(-ENOMEM);
 	spin_lock(&dasd_devmap_lock);
-	devmap = 0;
+	devmap = NULL;
 	hash = dasd_hash_busid(bus_id);
 	list_for_each_entry(tmp, &dasd_hashlists[hash], list)
 		if (strncmp(tmp->bus_id, bus_id, BUS_ID_SIZE) == 0) {
@@ -406,10 +406,10 @@ dasd_add_busid(char *bus_id, int features)
 		new->devindex = dasd_max_devindex++;
 		strncpy(new->bus_id, bus_id, BUS_ID_SIZE);
 		new->features = features;
-		new->device = 0;
+		new->device = NULL;
 		list_add(&new->list, &dasd_hashlists[hash]);
 		devmap = new;
-		new = 0;
+		new = NULL;
 	}
 	spin_unlock(&dasd_devmap_lock);
 	kfree(new);
@@ -479,7 +479,7 @@ dasd_device_from_devindex(int devindex)
 	int i;
 
 	spin_lock(&dasd_devmap_lock);
-	devmap = 0;
+	devmap = NULL;
 	for (i = 0; (i < 256) && !devmap; i++)
 		list_for_each_entry(tmp, &dasd_hashlists[i], list)
 			if (tmp->devindex == devindex) {
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 2e655f4..39c2281 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -65,16 +65,16 @@ struct dasd_eckd_private {
 /* The ccw bus type uses this table to find devices that it sends to
  * dasd_eckd_probe */
 static struct ccw_device_id dasd_eckd_ids[] = {
-	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), driver_info: 0x1},
-	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), driver_info: 0x2},
-	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), driver_info: 0x3},
-	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), driver_info: 0x4},
-	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), driver_info: 0x5},
-	{ CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), driver_info: 0x6},
-	{ CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3390, 0), driver_info: 0x7},
-	{ CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3380, 0), driver_info: 0x8},
-	{ CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3390, 0), driver_info: 0x9},
-	{ CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3380, 0), driver_info: 0xa},
+	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), .driver_info = 0x1},
+	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), .driver_info = 0x2},
+	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), .driver_info = 0x3},
+	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), .driver_info = 0x4},
+	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), .driver_info = 0x5},
+	{ CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), .driver_info = 0x6},
+	{ CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3390, 0), .driver_info = 0x7},
+	{ CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3380, 0), .driver_info = 0x8},
+	{ CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3390, 0), .driver_info = 0x9},
+	{ CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3380, 0), .driver_info = 0xa},
 	{ /* end of list */ },
 };
 
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index 808434d..e85015b 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -44,8 +44,8 @@ struct dasd_fba_private {
 };
 
 static struct ccw_device_id dasd_fba_ids[] = {
-	{ CCW_DEVICE_DEVTYPE (0x6310, 0, 0x9336, 0), driver_info: 0x1},
-	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3370, 0), driver_info: 0x2},
+	{ CCW_DEVICE_DEVTYPE (0x6310, 0, 0x9336, 0), .driver_info = 0x1},
+	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3370, 0), .driver_info = 0x2},
 	{ /* end of list */ },
 };
 
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index 12c7d29..4c272b7 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -84,9 +84,9 @@ void
 dasd_gendisk_free(struct dasd_device *device)
 {
 	del_gendisk(device->gdp);
-	device->gdp->queue = 0;
+	device->gdp->queue = NULL;
 	put_disk(device->gdp);
-	device->gdp = 0;
+	device->gdp = NULL;
 }
 
 /*
@@ -136,7 +136,7 @@ dasd_destroy_partitions(struct dasd_device * device)
 	 * device->bdev to lower the offline open_count limit again.
 	 */
 	bdev = device->bdev;
-	device->bdev = 0;
+	device->bdev = NULL;
 
 	/*
 	 * See fs/partition/check.c:delete_partition
@@ -145,7 +145,7 @@ dasd_destroy_partitions(struct dasd_device * device)
 	 */
 	memset(&bpart, 0, sizeof(struct blkpg_partition));
 	memset(&barg, 0, sizeof(struct blkpg_ioctl_arg));
-	barg.data = &bpart;
+	barg.data = (void __user *) &bpart;
 	barg.op = BLKPG_DEL_PARTITION;
 	for (bpart.pno = device->gdp->minors - 1; bpart.pno > 0; bpart.pno--)
 		ioctl_by_bdev(bdev, BLKPG, (unsigned long) &barg);
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index e97f531..8fed360 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -345,7 +345,7 @@ dasd_ioctl_set_ro(struct block_device *bdev, void __user *argp)
 	if (bdev != bdev->bd_contains)
 		// ro setting is not allowed for partitions
 		return -EINVAL;
-	if (get_user(intval, (int *)argp))
+	if (get_user(intval, (int __user *)argp))
 		return -EFAULT;
 
 	set_disk_ro(bdev->bd_disk, intval);
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index 4c1e56b..4cd879c 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -71,11 +71,11 @@ static int xpram_devs;
 /*
  * Parameter parsing functions.
  */
-static int devs = XPRAM_DEVS;
-static unsigned int sizes[XPRAM_MAX_DEVS];
+static int __initdata devs = XPRAM_DEVS;
+static char __initdata *sizes[XPRAM_MAX_DEVS];
 
 module_param(devs, int, 0);
-module_param_array(sizes, int, NULL, 0);
+module_param_array(sizes, charp, NULL, 0);
 
 MODULE_PARM_DESC(devs, "number of devices (\"partitions\"), " \
 		 "the default is " __MODULE_STRING(XPRAM_DEVS) "\n");
@@ -86,59 +86,6 @@ MODULE_PARM_DESC(sizes, "list of device (partition) sizes " \
 		 "claimed by explicit sizes\n");
 MODULE_LICENSE("GPL");
 
-#ifndef MODULE
-/*
- * Parses the kernel parameters given in the kernel parameter line.
- * The expected format is
- *           <number_of_partitions>[","<partition_size>]*
- * where
- *           devices is a positive integer that initializes xpram_devs
- *           each size is a non-negative integer possibly followed by a
- *           magnitude (k,K,m,M,g,G), the list of sizes initialises
- *           xpram_sizes
- *
- * Arguments
- *           str: substring of kernel parameter line that contains xprams
- *                kernel parameters.
- *
- * Result    0 on success, -EINVAL else -- only for Version > 2.3
- *
- * Side effects
- *           the global variabls devs is set to the value of
- *           <number_of_partitions> and sizes[i] is set to the i-th
- *           partition size (if provided). A parsing error of a value
- *           results in this value being set to -EINVAL.
- */
-static int __init xpram_setup (char *str)
-{
-	char *cp;
-	int i;
-
-	devs = simple_strtoul(str, &cp, 10);
-	if (cp <= str || devs > XPRAM_MAX_DEVS)
-		return 0;
-	for (i = 0; (i < devs) && (*cp++ == ','); i++) {
-		sizes[i] = simple_strtoul(cp, &cp, 10);
-		if (*cp == 'g' || *cp == 'G') {
-			sizes[i] <<= 20;
-			cp++;
-		} else if (*cp == 'm' || *cp == 'M') {
-			sizes[i] <<= 10;
-			cp++;
-		} else if (*cp == 'k' || *cp == 'K')
-			cp++;
-		while (isspace(*cp)) cp++;
-	}
-	if (*cp == ',' && i >= devs)
-		PRINT_WARN("partition sizes list has too many entries.\n");
-	else if (*cp != 0)
-		PRINT_WARN("ignored '%s' at end of parameter string.\n", cp);
-	return 1;
-}
-
-__setup("xpram_parts=", xpram_setup);
-#endif
-
 /*
  * Copy expanded memory page (4kB) into main memory                  
  * Arguments                                                         
@@ -374,7 +321,9 @@ static int __init xpram_setup_sizes(unsigned long pages)
 	mem_needed = 0;
 	mem_auto_no = 0;
 	for (i = 0; i < xpram_devs; i++) {
-		xpram_sizes[i] = (sizes[i] + 3) & -4UL;
+		if (sizes[i])
+			xpram_sizes[i] =
+				(memparse(sizes[i], &sizes[i]) + 3) & -4UL;
 		if (xpram_sizes[i])
 			mem_needed += xpram_sizes[i];
 		else
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index f25c6d1..2fa566f 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -693,7 +693,7 @@ raw3215_probe (struct ccw_device *cdev)
 				       GFP_KERNEL|GFP_DMA);
 	if (raw->buffer == NULL) {
 		spin_lock(&raw3215_device_lock);
-		raw3215[line] = 0;
+		raw3215[line] = NULL;
 		spin_unlock(&raw3215_device_lock);
 		kfree(raw);
 		return -ENOMEM;
diff --git a/drivers/s390/char/ctrlchar.c b/drivers/s390/char/ctrlchar.c
index 0ea6f36..d83eb63 100644
--- a/drivers/s390/char/ctrlchar.c
+++ b/drivers/s390/char/ctrlchar.c
@@ -23,7 +23,7 @@ ctrlchar_handle_sysrq(void *tty)
 	handle_sysrq(ctrlchar_sysrq_key, NULL, (struct tty_struct *) tty);
 }
 
-static DECLARE_WORK(ctrlchar_work, ctrlchar_handle_sysrq, 0);
+static DECLARE_WORK(ctrlchar_work, ctrlchar_handle_sysrq, NULL);
 #endif
 
 
diff --git a/drivers/s390/char/defkeymap.c b/drivers/s390/char/defkeymap.c
index ca15adb..17027d9 100644
--- a/drivers/s390/char/defkeymap.c
+++ b/drivers/s390/char/defkeymap.c
@@ -83,8 +83,8 @@ static u_short shift_ctrl_map[NR_KEYS] = {
 };
 
 ushort *key_maps[MAX_NR_KEYMAPS] = {
-	plain_map, shift_map, 0, 0,
-	ctrl_map, shift_ctrl_map,	0
+	plain_map, shift_map, NULL, NULL,
+	ctrl_map, shift_ctrl_map, NULL,
 };
 
 unsigned int keymap_count = 4;
@@ -145,7 +145,7 @@ char *func_table[MAX_NR_FUNC] = {
 	func_buf + 97,
 	func_buf + 103,
 	func_buf + 109,
-	0,
+	NULL,
 };
 
 struct kbdiacr accent_table[MAX_DIACR] = {
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index 6099c14..ef004d0 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -236,7 +236,7 @@ fs3270_irq(struct fs3270 *fp, struct raw3270_request *rq, struct irb *irb)
  * Process reads from fullscreen 3270.
  */
 static ssize_t
-fs3270_read(struct file *filp, char *data, size_t count, loff_t *off)
+fs3270_read(struct file *filp, char __user *data, size_t count, loff_t *off)
 {
 	struct fs3270 *fp;
 	struct raw3270_request *rq;
@@ -281,7 +281,7 @@ fs3270_read(struct file *filp, char *data, size_t count, loff_t *off)
  * Process writes to fullscreen 3270.
  */
 static ssize_t
-fs3270_write(struct file *filp, const char *data, size_t count, loff_t *off)
+fs3270_write(struct file *filp, const char __user *data, size_t count, loff_t *off)
 {
 	struct fs3270 *fp;
 	struct raw3270_request *rq;
@@ -338,10 +338,10 @@ fs3270_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		fp->write_command = arg;
 		break;
 	case TUBGETI:
-		rc = put_user(fp->read_command, (char *) arg);
+		rc = put_user(fp->read_command, (char __user *) arg);
 		break;
 	case TUBGETO:
-		rc = put_user(fp->write_command,(char *) arg);
+		rc = put_user(fp->write_command,(char __user *) arg);
 		break;
 	case TUBGETMOD:
 		iocb.model = fp->view.model;
@@ -350,7 +350,7 @@ fs3270_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		iocb.pf_cnt = 24;
 		iocb.re_cnt = 20;
 		iocb.map = 0;
-		if (copy_to_user((char *) arg, &iocb,
+		if (copy_to_user((char __user *) arg, &iocb,
 				 sizeof(struct raw3270_iocb)))
 			rc = -EFAULT;
 		break;
@@ -479,7 +479,7 @@ fs3270_close(struct inode *inode, struct file *filp)
 	struct fs3270 *fp;
 
 	fp = filp->private_data;
-	filp->private_data = 0;
+	filp->private_data = NULL;
 	if (fp) {
 		fp->fs_pid = 0;
 		raw3270_reset(&fp->view);
diff --git a/drivers/s390/char/keyboard.c b/drivers/s390/char/keyboard.c
index 547ef90..3be0656 100644
--- a/drivers/s390/char/keyboard.c
+++ b/drivers/s390/char/keyboard.c
@@ -103,7 +103,7 @@ out_maps:
 out_kbd:
 	kfree(kbd);
 out:
-	return 0;
+	return NULL;
 }
 
 void
@@ -304,7 +304,7 @@ kbd_keycode(struct kbd_data *kbd, unsigned int keycode)
 		if (kbd->sysrq) {
 			if (kbd->sysrq == K(KT_LATIN, '-')) {
 				kbd->sysrq = 0;
-				handle_sysrq(value, 0, kbd->tty);
+				handle_sysrq(value, NULL, kbd->tty);
 				return;
 			}
 			if (value == '-') {
@@ -363,7 +363,7 @@ do_kdsk_ioctl(struct kbd_data *kbd, struct kbentry __user *user_kbe,
 			/* disallocate map */
 			key_map = kbd->key_maps[tmp.kb_table];
 			if (key_map) {
-			    kbd->key_maps[tmp.kb_table] = 0;
+			    kbd->key_maps[tmp.kb_table] = NULL;
 			    kfree(key_map);
 			}
 			break;
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index e95b56f..95e285b 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -555,7 +555,7 @@ raw3270_start_init(struct raw3270 *rp, struct raw3270_view *view,
 #ifdef CONFIG_TN3270_CONSOLE
 	if (raw3270_registered == 0) {
 		spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
-		rq->callback = 0;
+		rq->callback = NULL;
 		rc = __raw3270_start(rp, view, rq);
 		if (rc == 0)
 			while (!raw3270_request_final(rq)) {
@@ -719,8 +719,8 @@ raw3270_size_device(struct raw3270 *rp)
 		rc = __raw3270_size_device_vm(rp);
 	else
 		rc = __raw3270_size_device(rp);
-	raw3270_init_view.dev = 0;
-	rp->view = 0;
+	raw3270_init_view.dev = NULL;
+	rp->view = NULL;
 	up(&raw3270_init_sem);
 	if (rc == 0) {	/* Found something. */
 		/* Try to find a model. */
@@ -761,8 +761,8 @@ raw3270_reset_device(struct raw3270 *rp)
 	rp->view = &raw3270_init_view;
 	raw3270_init_view.dev = rp;
 	rc = raw3270_start_init(rp, &raw3270_init_view, &rp->init_request);
-	raw3270_init_view.dev = 0;
-	rp->view = 0;
+	raw3270_init_view.dev = NULL;
+	rp->view = NULL;
 	up(&raw3270_init_sem);
 	return rc;
 }
@@ -934,7 +934,7 @@ raw3270_activate_view(struct raw3270_view *view)
 	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
 		rc = -ENODEV;
 	else {
-		oldview = 0;
+		oldview = NULL;
 		if (rp->view) {
 			oldview = rp->view;
 			oldview->fn->deactivate(oldview);
@@ -951,7 +951,7 @@ raw3270_activate_view(struct raw3270_view *view)
 						rp->view = nv;
 						if (nv->fn->activate(nv) == 0)
 							break;
-						rp->view = 0;
+						rp->view = NULL;
 					}
 			}
 		}
@@ -975,7 +975,7 @@ raw3270_deactivate_view(struct raw3270_view *view)
 	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
 	if (rp->view == view) {
 		view->fn->deactivate(view);
-		rp->view = 0;
+		rp->view = NULL;
 		/* Move deactivated view to end of list. */
 		list_del_init(&view->list);
 		list_add_tail(&view->list, &rp->view_list);
@@ -985,7 +985,7 @@ raw3270_deactivate_view(struct raw3270_view *view)
 				rp->view = view;
 				if (view->fn->activate(view) == 0)
 					break;
-				rp->view = 0;
+				rp->view = NULL;
 			}
 		}
 	}
@@ -1076,7 +1076,7 @@ raw3270_del_view(struct raw3270_view *view)
 	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
 	if (rp->view == view) {
 		view->fn->deactivate(view);
-		rp->view = 0;
+		rp->view = NULL;
 	}
 	list_del_init(&view->list);
 	if (!rp->view && test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
@@ -1117,9 +1117,9 @@ raw3270_delete_device(struct raw3270 *rp)
 
 	/* Disconnect from ccw_device. */
 	cdev = rp->cdev;
-	rp->cdev = 0;
-	cdev->dev.driver_data = 0;
-	cdev->handler = 0;
+	rp->cdev = NULL;
+	cdev->dev.driver_data = NULL;
+	cdev->handler = NULL;
 
 	/* Put ccw_device structure. */
 	put_device(&cdev->dev);
@@ -1144,7 +1144,7 @@ raw3270_model_show(struct device *dev, struct device_attribute *attr, char *buf)
 	return snprintf(buf, PAGE_SIZE, "%i\n",
 			((struct raw3270 *) dev->driver_data)->model);
 }
-static DEVICE_ATTR(model, 0444, raw3270_model_show, 0);
+static DEVICE_ATTR(model, 0444, raw3270_model_show, NULL);
 
 static ssize_t
 raw3270_rows_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1152,7 +1152,7 @@ raw3270_rows_show(struct device *dev, struct device_attribute *attr, char *buf)
 	return snprintf(buf, PAGE_SIZE, "%i\n",
 			((struct raw3270 *) dev->driver_data)->rows);
 }
-static DEVICE_ATTR(rows, 0444, raw3270_rows_show, 0);
+static DEVICE_ATTR(rows, 0444, raw3270_rows_show, NULL);
 
 static ssize_t
 raw3270_columns_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1160,7 +1160,7 @@ raw3270_columns_show(struct device *dev, struct device_attribute *attr, char *bu
 	return snprintf(buf, PAGE_SIZE, "%i\n",
 			((struct raw3270 *) dev->driver_data)->cols);
 }
-static DEVICE_ATTR(columns, 0444, raw3270_columns_show, 0);
+static DEVICE_ATTR(columns, 0444, raw3270_columns_show, NULL);
 
 static struct attribute * raw3270_attrs[] = {
 	&dev_attr_model.attr,
@@ -1296,7 +1296,7 @@ raw3270_remove (struct ccw_device *cdev)
 	spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
 	if (rp->view) {
 		rp->view->fn->deactivate(rp->view);
-		rp->view = 0;
+		rp->view = NULL;
 	}
 	while (!list_empty(&rp->view_list)) {
 		v = list_entry(rp->view_list.next, struct raw3270_view, list);
diff --git a/drivers/s390/char/raw3270.h b/drivers/s390/char/raw3270.h
index b635bf8..90beaa8 100644
--- a/drivers/s390/char/raw3270.h
+++ b/drivers/s390/char/raw3270.h
@@ -231,7 +231,7 @@ alloc_string(struct list_head *free_list, unsigned long len)
 		INIT_LIST_HEAD(&cs->update);
 		return cs;
 	}
-	return 0;
+	return NULL;
 }
 
 static inline unsigned long
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 48b4d30..7b95dab 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -1309,9 +1309,9 @@ static struct tape_discipline tape_discipline_34xx = {
 };
 
 static struct ccw_device_id tape_34xx_ids[] = {
-	{ CCW_DEVICE_DEVTYPE(0x3480, 0, 0x3480, 0), driver_info: tape_3480},
-	{ CCW_DEVICE_DEVTYPE(0x3490, 0, 0x3490, 0), driver_info: tape_3490},
-	{ /* end of list */ }
+	{ CCW_DEVICE_DEVTYPE(0x3480, 0, 0x3480, 0), .driver_info = tape_3480},
+	{ CCW_DEVICE_DEVTYPE(0x3490, 0, 0x3490, 0), .driver_info = tape_3490},
+	{ /* end of list */ },
 };
 
 static int
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index f496f23..2971804 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -437,7 +437,7 @@ tty3270_rcl_add(struct tty3270 *tp, char *input, int len)
 {
 	struct string *s;
 
-	tp->rcl_walk = 0;
+	tp->rcl_walk = NULL;
 	if (len <= 0)
 		return;
 	if (tp->rcl_nr >= tp->rcl_max) {
@@ -466,12 +466,12 @@ tty3270_rcl_backward(struct kbd_data *kbd)
 		else if (!list_empty(&tp->rcl_lines))
 			tp->rcl_walk = tp->rcl_lines.prev;
 		s = tp->rcl_walk ? 
-			list_entry(tp->rcl_walk, struct string, list) : 0;
+			list_entry(tp->rcl_walk, struct string, list) : NULL;
 		if (tp->rcl_walk) {
 			s = list_entry(tp->rcl_walk, struct string, list);
 			tty3270_update_prompt(tp, s->string, s->len);
 		} else
-			tty3270_update_prompt(tp, 0, 0);
+			tty3270_update_prompt(tp, NULL, 0);
 		tty3270_set_timer(tp, 1);
 	}
 	spin_unlock_bh(&tp->view.lock);
@@ -553,7 +553,7 @@ tty3270_read_tasklet(struct raw3270_request *rrq)
 	 * has to be emitted to the tty and for 0x6d the screen
 	 * needs to be redrawn.
 	 */
-	input = 0;
+	input = NULL;
 	len = 0;
 	if (tp->input->string[0] == 0x7d) {
 		/* Enter: write input to tty. */
@@ -567,7 +567,7 @@ tty3270_read_tasklet(struct raw3270_request *rrq)
 			tty3270_update_status(tp);
 		}
 		/* Clear input area. */
-		tty3270_update_prompt(tp, 0, 0);
+		tty3270_update_prompt(tp, NULL, 0);
 		tty3270_set_timer(tp, 1);
 	} else if (tp->input->string[0] == 0x6d) {
 		/* Display has been cleared. Redraw. */
@@ -808,8 +808,8 @@ tty3270_release(struct raw3270_view *view)
 	tp = (struct tty3270 *) view;
 	tty = tp->tty;
 	if (tty) {
-		tty->driver_data = 0;
-		tp->tty = tp->kbd->tty = 0;
+		tty->driver_data = NULL;
+		tp->tty = tp->kbd->tty = NULL;
 		tty_hangup(tty);
 		raw3270_put_view(&tp->view);
 	}
@@ -948,8 +948,8 @@ tty3270_close(struct tty_struct *tty, struct file * filp)
 		return;
 	tp = (struct tty3270 *) tty->driver_data;
 	if (tp) {
-		tty->driver_data = 0;
-		tp->tty = tp->kbd->tty = 0;
+		tty->driver_data = NULL;
+		tp->tty = tp->kbd->tty = NULL;
 		raw3270_put_view(&tp->view);
 	}
 }
@@ -1673,7 +1673,7 @@ tty3270_set_termios(struct tty_struct *tty, struct termios *old)
 		new = L_ECHO(tty) ? TF_INPUT: TF_INPUTN;
 		if (new != tp->inattr) {
 			tp->inattr = new;
-			tty3270_update_prompt(tp, 0, 0);
+			tty3270_update_prompt(tp, NULL, 0);
 			tty3270_set_timer(tp, 1);
 		}
 	}
@@ -1759,7 +1759,7 @@ void
 tty3270_notifier(int index, int active)
 {
 	if (active)
-		tty_register_device(tty3270_driver, index, 0);
+		tty_register_device(tty3270_driver, index, NULL);
 	else
 		tty_unregister_device(tty3270_driver, index);
 }
@@ -1818,7 +1818,7 @@ tty3270_exit(void)
 
 	raw3270_unregister_notifier(tty3270_notifier);
 	driver = tty3270_driver;
-	tty3270_driver = 0;
+	tty3270_driver = NULL;
 	tty_unregister_driver(driver);
 	tty3270_del_views();
 }
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index c625b69..6cb2304 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -86,8 +86,8 @@ struct vmlogrdr_priv_t {
  */
 static int vmlogrdr_open(struct inode *, struct file *);
 static int vmlogrdr_release(struct inode *, struct file *);
-static ssize_t vmlogrdr_read (struct file *filp, char *data, size_t count,
-			       loff_t * ppos);
+static ssize_t vmlogrdr_read (struct file *filp, char __user *data,
+			      size_t count, loff_t * ppos);
 
 static struct file_operations vmlogrdr_fops = {
 	.owner   = THIS_MODULE,
@@ -515,7 +515,7 @@ vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv) {
 
 
 static ssize_t
-vmlogrdr_read (struct file *filp, char *data, size_t count, loff_t * ppos)
+vmlogrdr_read(struct file *filp, char __user *data, size_t count, loff_t * ppos)
 {
 	int rc;
 	struct vmlogrdr_priv_t * priv = filp->private_data;
diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c
index 5acc0ac..807320a 100644
--- a/drivers/s390/char/vmwatchdog.c
+++ b/drivers/s390/char/vmwatchdog.c
@@ -193,7 +193,7 @@ static int vmwdt_ioctl(struct inode *i, struct file *f,
 		return 0;
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, (int *)arg);
+		return put_user(0, (int __user *)arg);
 	case WDIOC_GETTEMP:
 		return -EINVAL;
 	case WDIOC_SETOPTIONS:
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index c7319a0..f26a2ee 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -319,7 +319,7 @@ ccwgroup_online_store (struct device *dev, struct device_attribute *attr, const
 	if (!try_module_get(gdrv->owner))
 		return -EINVAL;
 
-	value = simple_strtoul(buf, 0, 0);
+	value = simple_strtoul(buf, NULL, 0);
 	ret = count;
 	if (value == 1)
 		ccwgroup_set_online(gdev);
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index a01f3bb..61ce3f1 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -1464,6 +1464,40 @@ chsc_get_chp_desc(struct subchannel *sch, int chp_no)
 	return desc;
 }
 
+static int reset_channel_path(struct channel_path *chp)
+{
+	int cc;
+
+	cc = rchp(chp->id);
+	switch (cc) {
+	case 0:
+		return 0;
+	case 2:
+		return -EBUSY;
+	default:
+		return -ENODEV;
+	}
+}
+
+static void reset_channel_paths_css(struct channel_subsystem *css)
+{
+	int i;
+
+	for (i = 0; i <= __MAX_CHPID; i++) {
+		if (css->chps[i])
+			reset_channel_path(css->chps[i]);
+	}
+}
+
+void cio_reset_channel_paths(void)
+{
+	int i;
+
+	for (i = 0; i <= __MAX_CSSID; i++) {
+		if (css[i] && css[i]->valid)
+			reset_channel_paths_css(css[i]);
+	}
+}
 
 static int __init
 chsc_alloc_sei_area(void)
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 6fec90e..89320c1 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -519,6 +519,7 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid)
 	memset(sch, 0, sizeof(struct subchannel));
 
 	spin_lock_init(&sch->lock);
+	mutex_init(&sch->reg_mutex);
 
 	/* Set a name for the subchannel */
 	snprintf (sch->dev.bus_id, BUS_ID_SIZE, "0.%x.%04x", schid.ssid,
@@ -797,7 +798,7 @@ struct subchannel *
 cio_get_console_subchannel(void)
 {
 	if (!console_subchannel_in_use)
-		return 0;
+		return NULL;
 	return &console_subchannel;
 }
 
@@ -875,5 +876,6 @@ void
 reipl(unsigned long devno)
 {
 	clear_all_subchannels();
+	cio_reset_channel_paths();
 	do_reipl(devno);
 }
diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h
index 0ca9873..4541c1a 100644
--- a/drivers/s390/cio/cio.h
+++ b/drivers/s390/cio/cio.h
@@ -2,6 +2,7 @@
 #define S390_CIO_H
 
 #include "schid.h"
+#include <linux/mutex.h>
 
 /*
  * where we put the ssd info
@@ -87,7 +88,7 @@ struct orb {
 struct subchannel {
 	struct subchannel_id schid;
 	spinlock_t lock;	/* subchannel lock */
-
+	struct mutex reg_mutex;
 	enum {
 		SUBCHANNEL_TYPE_IO = 0,
 		SUBCHANNEL_TYPE_CHSC = 1,
diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c
index 1c3e8e9..0df3af1f 100644
--- a/drivers/s390/cio/cmf.c
+++ b/drivers/s390/cio/cmf.c
@@ -1140,7 +1140,7 @@ static struct attribute *cmf_attributes[] = {
 	&dev_attr_avg_device_disconnect_time.attr,
 	&dev_attr_avg_control_unit_queuing_time.attr,
 	&dev_attr_avg_device_active_only_time.attr,
-	0,
+	NULL,
 };
 
 static struct attribute_group cmf_attr_group = {
@@ -1160,7 +1160,7 @@ static struct attribute *cmf_attributes_ext[] = {
 	&dev_attr_avg_device_active_only_time.attr,
 	&dev_attr_avg_device_busy_time.attr,
 	&dev_attr_avg_initial_command_response_time.attr,
-	0,
+	NULL,
 };
 
 static struct attribute_group cmf_attr_group_ext = {
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 1d3be80..13eeea3 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -108,6 +108,24 @@ css_subchannel_release(struct device *dev)
 
 extern int css_get_ssd_info(struct subchannel *sch);
 
+
+int css_sch_device_register(struct subchannel *sch)
+{
+	int ret;
+
+	mutex_lock(&sch->reg_mutex);
+	ret = device_register(&sch->dev);
+	mutex_unlock(&sch->reg_mutex);
+	return ret;
+}
+
+void css_sch_device_unregister(struct subchannel *sch)
+{
+	mutex_lock(&sch->reg_mutex);
+	device_unregister(&sch->dev);
+	mutex_unlock(&sch->reg_mutex);
+}
+
 static int
 css_register_subchannel(struct subchannel *sch)
 {
@@ -119,7 +137,7 @@ css_register_subchannel(struct subchannel *sch)
 	sch->dev.release = &css_subchannel_release;
 	
 	/* make it known to the system */
-	ret = device_register(&sch->dev);
+	ret = css_sch_device_register(sch);
 	if (ret)
 		printk (KERN_WARNING "%s: could not register %s\n",
 			__func__, sch->dev.bus_id);
@@ -250,7 +268,7 @@ css_evaluate_subchannel(struct subchannel_id schid, int slow)
 		 * The device will be killed automatically.
 		 */
 		cio_disable_subchannel(sch);
-		device_unregister(&sch->dev);
+		css_sch_device_unregister(sch);
 		/* Reset intparm to zeroes. */
 		sch->schib.pmcw.intparm = 0;
 		cio_modify(sch);
@@ -264,7 +282,7 @@ css_evaluate_subchannel(struct subchannel_id schid, int slow)
 		 * away in any case.
 		 */
 		if (!disc) {
-			device_unregister(&sch->dev);
+			css_sch_device_unregister(sch);
 			/* Reset intparm to zeroes. */
 			sch->schib.pmcw.intparm = 0;
 			cio_modify(sch);
@@ -605,9 +623,13 @@ init_channel_subsystem (void)
 		ret = device_register(&css[i]->device);
 		if (ret)
 			goto out_free;
-		if (css_characteristics_avail && css_chsc_characteristics.secm)
-			device_create_file(&css[i]->device,
-					   &dev_attr_cm_enable);
+		if (css_characteristics_avail &&
+		    css_chsc_characteristics.secm) {
+			ret = device_create_file(&css[i]->device,
+						 &dev_attr_cm_enable);
+			if (ret)
+				goto out_device;
+		}
 	}
 	css_init_done = 1;
 
@@ -615,6 +637,8 @@ init_channel_subsystem (void)
 
 	for_each_subchannel(__init_channel_subsystem, NULL);
 	return 0;
+out_device:
+	device_unregister(&css[i]->device);
 out_free:
 	kfree(css[i]);
 out_unregister:
diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h
index e210f89..8aabb4a 100644
--- a/drivers/s390/cio/css.h
+++ b/drivers/s390/cio/css.h
@@ -100,7 +100,7 @@ struct ccw_device_private {
 	struct qdio_irq *qdio_data;
 	struct irb irb;		/* device status */
 	struct senseid senseid;	/* SenseID info */
-	struct pgid pgid;	/* path group ID */
+	struct pgid pgid[8];	/* path group IDs per chpid*/
 	struct ccw1 iccws[2];	/* ccws for SNID/SID/SPGID commands */
 	struct work_struct kick_work;
 	wait_queue_head_t wait_q;
@@ -136,6 +136,8 @@ extern struct bus_type css_bus_type;
 extern struct css_driver io_subchannel_driver;
 
 extern int css_probe_device(struct subchannel_id);
+extern int css_sch_device_register(struct subchannel *);
+extern void css_sch_device_unregister(struct subchannel *);
 extern struct subchannel * get_subchannel_by_schid(struct subchannel_id);
 extern int css_init_done;
 extern int for_each_subchannel(int(*fn)(struct subchannel_id, void *), void *);
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 67f0de6..585fa04 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -100,7 +100,7 @@ ccw_uevent (struct device *dev, char **envp, int num_envp,
 	if ((buffer_size - length <= 0) || (i >= num_envp))
 		return -ENOMEM;
 
-	envp[i] = 0;
+	envp[i] = NULL;
 
 	return 0;
 }
@@ -280,7 +280,7 @@ ccw_device_remove_disconnected(struct ccw_device *cdev)
 	 * 'throw away device'.
 	 */
 	sch = to_subchannel(cdev->dev.parent);
-	device_unregister(&sch->dev);
+	css_sch_device_unregister(sch);
 	/* Reset intparm to zeroes. */
 	sch->schib.pmcw.intparm = 0;
 	cio_modify(sch);
@@ -625,7 +625,7 @@ ccw_device_do_unreg_rereg(void *data)
 					other_sch->schib.pmcw.intparm = 0;
 					cio_modify(other_sch);
 				}
-				device_unregister(&other_sch->dev);
+				css_sch_device_unregister(other_sch);
 			}
 		}
 		/* Update ssd info here. */
@@ -709,7 +709,7 @@ ccw_device_call_sch_unregister(void *data)
 	struct subchannel *sch;
 
 	sch = to_subchannel(cdev->dev.parent);
-	device_unregister(&sch->dev);
+	css_sch_device_unregister(sch);
 	/* Reset intparm to zeroes. */
 	sch->schib.pmcw.intparm = 0;
 	cio_modify(sch);
@@ -1057,7 +1057,7 @@ get_ccwdev_by_busid(struct ccw_driver *cdrv, const char *bus_id)
 				 __ccwdev_check_busid);
 	put_driver(drv);
 
-	return dev ? to_ccwdev(dev) : 0;
+	return dev ? to_ccwdev(dev) : NULL;
 }
 
 /************************** device driver handling ************************/
@@ -1082,7 +1082,7 @@ ccw_device_probe (struct device *dev)
 	ret = cdrv->probe ? cdrv->probe(cdev) : -ENODEV;
 
 	if (ret) {
-		cdev->drv = 0;
+		cdev->drv = NULL;
 		return ret;
 	}
 
@@ -1113,7 +1113,7 @@ ccw_device_remove (struct device *dev)
 				 ret, cdev->dev.bus_id);
 	}
 	ccw_device_set_timeout(cdev, 0);
-	cdev->drv = 0;
+	cdev->drv = NULL;
 	return 0;
 }
 
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index cb1af0b..ac6e0c7 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -378,6 +378,56 @@ ccw_device_done(struct ccw_device *cdev, int state)
 		put_device (&cdev->dev);
 }
 
+static inline int cmp_pgid(struct pgid *p1, struct pgid *p2)
+{
+	char *c1;
+	char *c2;
+
+	c1 = (char *)p1;
+	c2 = (char *)p2;
+
+	return memcmp(c1 + 1, c2 + 1, sizeof(struct pgid) - 1);
+}
+
+static void __ccw_device_get_common_pgid(struct ccw_device *cdev)
+{
+	int i;
+	int last;
+
+	last = 0;
+	for (i = 0; i < 8; i++) {
+		if (cdev->private->pgid[i].inf.ps.state1 == SNID_STATE1_RESET)
+			/* No PGID yet */
+			continue;
+		if (cdev->private->pgid[last].inf.ps.state1 ==
+		    SNID_STATE1_RESET) {
+			/* First non-zero PGID */
+			last = i;
+			continue;
+		}
+		if (cmp_pgid(&cdev->private->pgid[i],
+			     &cdev->private->pgid[last]) == 0)
+			/* Non-conflicting PGIDs */
+			continue;
+
+		/* PGID mismatch, can't pathgroup. */
+		CIO_MSG_EVENT(0, "SNID - pgid mismatch for device "
+			      "0.%x.%04x, can't pathgroup\n",
+			      cdev->private->ssid, cdev->private->devno);
+		cdev->private->options.pgroup = 0;
+		return;
+	}
+	if (cdev->private->pgid[last].inf.ps.state1 ==
+	    SNID_STATE1_RESET)
+		/* No previous pgid found */
+		memcpy(&cdev->private->pgid[0], &css[0]->global_pgid,
+		       sizeof(struct pgid));
+	else
+		/* Use existing pgid */
+		memcpy(&cdev->private->pgid[0], &cdev->private->pgid[last],
+		       sizeof(struct pgid));
+}
+
 /*
  * Function called from device_pgid.c after sense path ground has completed.
  */
@@ -388,24 +438,26 @@ ccw_device_sense_pgid_done(struct ccw_device *cdev, int err)
 
 	sch = to_subchannel(cdev->dev.parent);
 	switch (err) {
-	case 0:
-		/* Start Path Group verification. */
-		sch->vpm = 0;	/* Start with no path groups set. */
-		cdev->private->state = DEV_STATE_VERIFY;
-		ccw_device_verify_start(cdev);
+	case -EOPNOTSUPP: /* path grouping not supported, use nop instead. */
+		cdev->private->options.pgroup = 0;
+		break;
+	case 0: /* success */
+	case -EACCES: /* partial success, some paths not operational */
+		/* Check if all pgids are equal or 0. */
+		__ccw_device_get_common_pgid(cdev);
 		break;
 	case -ETIME:		/* Sense path group id stopped by timeout. */
 	case -EUSERS:		/* device is reserved for someone else. */
 		ccw_device_done(cdev, DEV_STATE_BOXED);
-		break;
-	case -EOPNOTSUPP: /* path grouping not supported, just set online. */
-		cdev->private->options.pgroup = 0;
-		ccw_device_done(cdev, DEV_STATE_ONLINE);
-		break;
+		return;
 	default:
 		ccw_device_done(cdev, DEV_STATE_NOT_OPER);
-		break;
+		return;
 	}
+	/* Start Path Group verification. */
+	sch->vpm = 0;	/* Start with no path groups set. */
+	cdev->private->state = DEV_STATE_VERIFY;
+	ccw_device_verify_start(cdev);
 }
 
 /*
@@ -562,8 +614,9 @@ ccw_device_online(struct ccw_device *cdev)
 	}
 	/* Do we want to do path grouping? */
 	if (!cdev->private->options.pgroup) {
-		/* No, set state online immediately. */
-		ccw_device_done(cdev, DEV_STATE_ONLINE);
+		/* Start initial path verification. */
+		cdev->private->state = DEV_STATE_VERIFY;
+		ccw_device_verify_start(cdev);
 		return 0;
 	}
 	/* Do a SensePGID first. */
@@ -609,6 +662,7 @@ ccw_device_offline(struct ccw_device *cdev)
 	/* Are we doing path grouping? */
 	if (!cdev->private->options.pgroup) {
 		/* No, set state offline immediately. */
+		sch->vpm = 0;
 		ccw_device_done(cdev, DEV_STATE_OFFLINE);
 		return 0;
 	}
@@ -705,8 +759,6 @@ ccw_device_online_verify(struct ccw_device *cdev, enum dev_event dev_event)
 {
 	struct subchannel *sch;
 
-	if (!cdev->private->options.pgroup)
-		return;
 	if (cdev->private->state == DEV_STATE_W4SENSE) {
 		cdev->private->flags.doverify = 1;
 		return;
@@ -995,8 +1047,7 @@ static void
 ccw_device_wait4io_verify(struct ccw_device *cdev, enum dev_event dev_event)
 {
 	/* When the I/O has terminated, we have to start verification. */
-	if (cdev->private->options.pgroup)
-		cdev->private->flags.doverify = 1;
+	cdev->private->flags.doverify = 1;
 }
 
 static void
diff --git a/drivers/s390/cio/device_pgid.c b/drivers/s390/cio/device_pgid.c
index 54cb64e..32610fd 100644
--- a/drivers/s390/cio/device_pgid.c
+++ b/drivers/s390/cio/device_pgid.c
@@ -33,12 +33,17 @@ __ccw_device_sense_pgid_start(struct ccw_device *cdev)
 	struct subchannel *sch;
 	struct ccw1 *ccw;
 	int ret;
+	int i;
 
 	sch = to_subchannel(cdev->dev.parent);
+	/* Return if we already checked on all paths. */
+	if (cdev->private->imask == 0)
+		return (sch->lpm == 0) ? -ENODEV : -EACCES;
+	i = 8 - ffs(cdev->private->imask);
+
 	/* Setup sense path group id channel program. */
 	ccw = cdev->private->iccws;
 	ccw->cmd_code = CCW_CMD_SENSE_PGID;
-	ccw->cda = (__u32) __pa (&cdev->private->pgid);
 	ccw->count = sizeof (struct pgid);
 	ccw->flags = CCW_FLAG_SLI;
 
@@ -48,6 +53,7 @@ __ccw_device_sense_pgid_start(struct ccw_device *cdev)
 	ret = -ENODEV;
 	while (cdev->private->imask != 0) {
 		/* Try every path multiple times. */
+		ccw->cda = (__u32) __pa (&cdev->private->pgid[i]);
 		if (cdev->private->iretry > 0) {
 			cdev->private->iretry--;
 			ret = cio_start (sch, cdev->private->iccws, 
@@ -64,7 +70,9 @@ __ccw_device_sense_pgid_start(struct ccw_device *cdev)
 		}
 		cdev->private->imask >>= 1;
 		cdev->private->iretry = 5;
+		i++;
 	}
+
 	return ret;
 }
 
@@ -76,7 +84,7 @@ ccw_device_sense_pgid_start(struct ccw_device *cdev)
 	cdev->private->state = DEV_STATE_SENSE_PGID;
 	cdev->private->imask = 0x80;
 	cdev->private->iretry = 5;
-	memset (&cdev->private->pgid, 0, sizeof (struct pgid));
+	memset (&cdev->private->pgid, 0, sizeof (cdev->private->pgid));
 	ret = __ccw_device_sense_pgid_start(cdev);
 	if (ret && ret != -EBUSY)
 		ccw_device_sense_pgid_done(cdev, ret);
@@ -91,6 +99,7 @@ __ccw_device_check_sense_pgid(struct ccw_device *cdev)
 {
 	struct subchannel *sch;
 	struct irb *irb;
+	int i;
 
 	sch = to_subchannel(cdev->dev.parent);
 	irb = &cdev->private->irb;
@@ -124,7 +133,8 @@ __ccw_device_check_sense_pgid(struct ccw_device *cdev)
 			      sch->schid.sch_no, sch->orb.lpm);
 		return -EACCES;
 	}
-	if (cdev->private->pgid.inf.ps.state2 == SNID_STATE2_RESVD_ELSE) {
+	i = 8 - ffs(cdev->private->imask);
+	if (cdev->private->pgid[i].inf.ps.state2 == SNID_STATE2_RESVD_ELSE) {
 		CIO_MSG_EVENT(2, "SNID - Device %04x on Subchannel 0.%x.%04x "
 			      "is reserved by someone else\n",
 			      cdev->private->devno, sch->schid.ssid,
@@ -162,12 +172,6 @@ ccw_device_sense_pgid_irq(struct ccw_device *cdev, enum dev_event dev_event)
 	memset(&cdev->private->irb, 0, sizeof(struct irb));
 	switch (ret) {
 	/* 0, -ETIME, -EOPNOTSUPP, -EAGAIN, -EACCES or -EUSERS */
-	case 0:			/* Sense Path Group ID successful. */
-		if (cdev->private->pgid.inf.ps.state1 == SNID_STATE1_RESET)
-			memcpy(&cdev->private->pgid, &css[0]->global_pgid,
-			       sizeof(struct pgid));
-		ccw_device_sense_pgid_done(cdev, 0);
-		break;
 	case -EOPNOTSUPP:	/* Sense Path Group ID not supported */
 		ccw_device_sense_pgid_done(cdev, -EOPNOTSUPP);
 		break;
@@ -176,13 +180,15 @@ ccw_device_sense_pgid_irq(struct ccw_device *cdev, enum dev_event dev_event)
 		break;
 	case -EACCES:		/* channel is not operational. */
 		sch->lpm &= ~cdev->private->imask;
+		/* Fall through. */
+	case 0:			/* Sense Path Group ID successful. */
 		cdev->private->imask >>= 1;
 		cdev->private->iretry = 5;
 		/* Fall through. */
 	case -EAGAIN:		/* Try again. */
 		ret = __ccw_device_sense_pgid_start(cdev);
 		if (ret != 0 && ret != -EBUSY)
-			ccw_device_sense_pgid_done(cdev, -ENODEV);
+			ccw_device_sense_pgid_done(cdev, ret);
 		break;
 	case -EUSERS:		/* device is reserved for someone else. */
 		ccw_device_sense_pgid_done(cdev, -EUSERS);
@@ -203,20 +209,20 @@ __ccw_device_do_pgid(struct ccw_device *cdev, __u8 func)
 	sch = to_subchannel(cdev->dev.parent);
 
 	/* Setup sense path group id channel program. */
-	cdev->private->pgid.inf.fc = func;
+	cdev->private->pgid[0].inf.fc = func;
 	ccw = cdev->private->iccws;
 	if (!cdev->private->flags.pgid_single) {
-		cdev->private->pgid.inf.fc |= SPID_FUNC_MULTI_PATH;
+		cdev->private->pgid[0].inf.fc |= SPID_FUNC_MULTI_PATH;
 		ccw->cmd_code = CCW_CMD_SUSPEND_RECONN;
 		ccw->cda = 0;
 		ccw->count = 0;
 		ccw->flags = CCW_FLAG_SLI | CCW_FLAG_CC;
 		ccw++;
 	} else
-		cdev->private->pgid.inf.fc |= SPID_FUNC_SINGLE_PATH;
+		cdev->private->pgid[0].inf.fc |= SPID_FUNC_SINGLE_PATH;
 
 	ccw->cmd_code = CCW_CMD_SET_PGID;
-	ccw->cda = (__u32) __pa (&cdev->private->pgid);
+	ccw->cda = (__u32) __pa (&cdev->private->pgid[0]);
 	ccw->count = sizeof (struct pgid);
 	ccw->flags = CCW_FLAG_SLI;
 
@@ -244,6 +250,48 @@ __ccw_device_do_pgid(struct ccw_device *cdev, __u8 func)
 }
 
 /*
+ * Helper function to send a nop ccw down a path.
+ */
+static int __ccw_device_do_nop(struct ccw_device *cdev)
+{
+	struct subchannel *sch;
+	struct ccw1 *ccw;
+	int ret;
+
+	sch = to_subchannel(cdev->dev.parent);
+
+	/* Setup nop channel program. */
+	ccw = cdev->private->iccws;
+	ccw->cmd_code = CCW_CMD_NOOP;
+	ccw->cda = 0;
+	ccw->count = 0;
+	ccw->flags = CCW_FLAG_SLI;
+
+	/* Reset device status. */
+	memset(&cdev->private->irb, 0, sizeof(struct irb));
+
+	/* Try multiple times. */
+	ret = -ENODEV;
+	if (cdev->private->iretry > 0) {
+		cdev->private->iretry--;
+		ret = cio_start (sch, cdev->private->iccws,
+				 cdev->private->imask);
+		/* ret is 0, -EBUSY, -EACCES or -ENODEV */
+		if ((ret != -EACCES) && (ret != -ENODEV))
+			return ret;
+	}
+	/* nop command failed on this path. Switch it off. */
+	sch->lpm &= ~cdev->private->imask;
+	sch->vpm &= ~cdev->private->imask;
+	CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel "
+		      "0.%x.%04x, lpm %02X, became 'not operational'\n",
+		      cdev->private->devno, sch->schid.ssid,
+		      sch->schid.sch_no, cdev->private->imask);
+	return ret;
+}
+
+
+/*
  * Called from interrupt context to check if a valid answer
  * to Set Path Group ID was received.
  */
@@ -282,6 +330,29 @@ __ccw_device_check_pgid(struct ccw_device *cdev)
 	return 0;
 }
 
+/*
+ * Called from interrupt context to check the path status after a nop has
+ * been send.
+ */
+static int __ccw_device_check_nop(struct ccw_device *cdev)
+{
+	struct subchannel *sch;
+	struct irb *irb;
+
+	sch = to_subchannel(cdev->dev.parent);
+	irb = &cdev->private->irb;
+	if (irb->scsw.fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC))
+		return -ETIME;
+	if (irb->scsw.cc == 3) {
+		CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel 0.%x.%04x,"
+			      " lpm %02X, became 'not operational'\n",
+			      cdev->private->devno, sch->schid.ssid,
+			      sch->schid.sch_no, cdev->private->imask);
+		return -EACCES;
+	}
+	return 0;
+}
+
 static void
 __ccw_device_verify_start(struct ccw_device *cdev)
 {
@@ -296,9 +367,12 @@ __ccw_device_verify_start(struct ccw_device *cdev)
 			if ((sch->vpm & imask) != (sch->lpm & imask))
 				break;
 		cdev->private->imask = imask;
-		func = (sch->vpm & imask) ?
-			SPID_FUNC_RESIGN : SPID_FUNC_ESTABLISH;
-		ret = __ccw_device_do_pgid(cdev, func);
+		if (cdev->private->options.pgroup) {
+			func = (sch->vpm & imask) ?
+				SPID_FUNC_RESIGN : SPID_FUNC_ESTABLISH;
+			ret = __ccw_device_do_pgid(cdev, func);
+		} else
+			ret = __ccw_device_do_nop(cdev);
 		if (ret == 0 || ret == -EBUSY)
 			return;
 		cdev->private->iretry = 5;
@@ -327,7 +401,10 @@ ccw_device_verify_irq(struct ccw_device *cdev, enum dev_event dev_event)
 	if (ccw_device_accumulate_and_sense(cdev, irb) != 0)
 		return;
 	sch = to_subchannel(cdev->dev.parent);
-	ret = __ccw_device_check_pgid(cdev);
+	if (cdev->private->options.pgroup)
+		ret = __ccw_device_check_pgid(cdev);
+	else
+		ret = __ccw_device_check_nop(cdev);
 	memset(&cdev->private->irb, 0, sizeof(struct irb));
 	switch (ret) {
 	/* 0, -ETIME, -EAGAIN, -EOPNOTSUPP or -EACCES */
@@ -345,11 +422,10 @@ ccw_device_verify_irq(struct ccw_device *cdev, enum dev_event dev_event)
 		 * One of those strange devices which claim to be able
 		 * to do multipathing but not for Set Path Group ID.
 		 */
-		if (cdev->private->flags.pgid_single) {
-			ccw_device_verify_done(cdev, -EOPNOTSUPP);
-			break;
-		}
-		cdev->private->flags.pgid_single = 1;
+		if (cdev->private->flags.pgid_single)
+			cdev->private->options.pgroup = 0;
+		else
+			cdev->private->flags.pgid_single = 1;
 		/* fall through. */
 	case -EAGAIN:		/* Try again. */
 		__ccw_device_verify_start(cdev);
diff --git a/drivers/s390/cio/device_status.c b/drivers/s390/cio/device_status.c
index 14bef2c..caf148d 100644
--- a/drivers/s390/cio/device_status.c
+++ b/drivers/s390/cio/device_status.c
@@ -67,8 +67,7 @@ ccw_device_path_notoper(struct ccw_device *cdev)
 		      sch->schib.pmcw.pnom);
 
 	sch->lpm &= ~sch->schib.pmcw.pnom;
-	if (cdev->private->options.pgroup)
-		cdev->private->flags.doverify = 1;
+	cdev->private->flags.doverify = 1;
 }
 
 /*
@@ -180,7 +179,7 @@ ccw_device_accumulate_esw(struct ccw_device *cdev, struct irb *irb)
 	cdev_irb->esw.esw0.erw.auth = irb->esw.esw0.erw.auth;
 	/* Copy path verification required flag. */
 	cdev_irb->esw.esw0.erw.pvrf = irb->esw.esw0.erw.pvrf;
-	if (irb->esw.esw0.erw.pvrf && cdev->private->options.pgroup)
+	if (irb->esw.esw0.erw.pvrf)
 		cdev->private->flags.doverify = 1;
 	/* Copy concurrent sense bit. */
 	cdev_irb->esw.esw0.erw.cons = irb->esw.esw0.erw.cons;
@@ -354,7 +353,7 @@ ccw_device_accumulate_basic_sense(struct ccw_device *cdev, struct irb *irb)
 	}
 	/* Check if path verification is required. */
 	if (ccw_device_accumulate_esw_valid(irb) &&
-	    irb->esw.esw0.erw.pvrf && cdev->private->options.pgroup) 
+	    irb->esw.esw0.erw.pvrf)
 		cdev->private->flags.doverify = 1;
 }
 
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index b70039a..7c93a87 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -2735,7 +2735,7 @@ qdio_free(struct ccw_device *cdev)
 	QDIO_DBF_TEXT1(0,trace,dbf_text);
 	QDIO_DBF_TEXT0(0,setup,dbf_text);
 
-	cdev->private->qdio_data = 0;
+	cdev->private->qdio_data = NULL;
 
 	up(&irq_ptr->setting_up_sema);
 
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index 23d53bf..95f4e10 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -529,7 +529,7 @@ claw_open(struct net_device *dev)
         printk(KERN_INFO "%s:%s Enter  \n",dev->name,__FUNCTION__);
 #endif
 	CLAW_DBF_TEXT(4,trace,"open");
-	if (!dev | (dev->name[0] == 0x00)) {
+	if (!dev || (dev->name[0] == 0x00)) {
 		CLAW_DBF_TEXT(2,trace,"BadDev");
 	 	printk(KERN_WARNING "claw: Bad device at open failing \n");
 		return -ENODEV;
diff --git a/drivers/s390/net/iucv.c b/drivers/s390/net/iucv.c
index 189a492..0e863df 100644
--- a/drivers/s390/net/iucv.c
+++ b/drivers/s390/net/iucv.c
@@ -692,7 +692,7 @@ iucv_retrieve_buffer (void)
 	iucv_debug(1, "entering");
 	if (iucv_cpuid != -1) {
 		smp_call_function_on(iucv_retrieve_buffer_cpuid,
-				     0, 0, 1, iucv_cpuid);
+				     NULL, 0, 1, iucv_cpuid);
 		/* Release the cpu reserved by iucv_declare_buffer. */
 		smp_put_cpu(iucv_cpuid);
 		iucv_cpuid = -1;
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index b452cc1..5d6e6cb 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -2029,7 +2029,7 @@ remove_write (struct device_driver *drv, const char *buf, size_t count)
                 count = IFNAMSIZ-1;
 
         for (i=0, p=(char *)buf; i<count && *p; i++, p++) {
-                if ((*p == '\n') | (*p == ' ')) {
+                if ((*p == '\n') || (*p == ' ')) {
                         /* trailing lf, grr */
                         break;
                 } else {
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index 8e8963f..103c414 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -4420,8 +4420,10 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
 	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
 	struct qeth_eddp_context *ctx = NULL;
 	int tx_bytes = skb->len;
+#ifdef CONFIG_QETH_PERF_STATS
 	unsigned short nr_frags = skb_shinfo(skb)->nr_frags;
 	unsigned short tso_size = skb_shinfo(skb)->gso_size;
+#endif
 	int rc;
 
 	QETH_DBF_TEXT(trace, 6, "sendpkt");
@@ -4457,7 +4459,7 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
 	queue = card->qdio.out_qs
 		[qeth_get_priority_queue(card, skb, ipv, cast_type)];
 
-	if (skb_shinfo(skb)->gso_size)
+	if (skb_is_gso(skb))
 		large_send = card->options.large_send;
 
 	/*are we able to do TSO ? If so ,prepare and send it from here */
@@ -4802,7 +4804,7 @@ static struct qeth_cmd_buffer *
 qeth_get_setassparms_cmd(struct qeth_card *, enum qeth_ipa_funcs,
 			 __u16, __u16, enum qeth_prot_versions);
 static int
-qeth_arp_query(struct qeth_card *card, char *udata)
+qeth_arp_query(struct qeth_card *card, char __user *udata)
 {
 	struct qeth_cmd_buffer *iob;
 	struct qeth_arp_query_info qinfo = {0, };
@@ -4935,7 +4937,7 @@ qeth_get_adapter_cmd(struct qeth_card *card, __u32 command, __u32 cmdlen)
  * function to send SNMP commands to OSA-E card
  */
 static int
-qeth_snmp_command(struct qeth_card *card, char *udata)
+qeth_snmp_command(struct qeth_card *card, char __user *udata)
 {
 	struct qeth_cmd_buffer *iob;
 	struct qeth_ipa_cmd *cmd;
@@ -7907,9 +7909,9 @@ qeth_set_online(struct ccwgroup_device *gdev)
 }
 
 static struct ccw_device_id qeth_ids[] = {
-	{CCW_DEVICE(0x1731, 0x01), driver_info:QETH_CARD_TYPE_OSAE},
-	{CCW_DEVICE(0x1731, 0x05), driver_info:QETH_CARD_TYPE_IQD},
-	{CCW_DEVICE(0x1731, 0x06), driver_info:QETH_CARD_TYPE_OSN},
+	{CCW_DEVICE(0x1731, 0x01), .driver_info = QETH_CARD_TYPE_OSAE},
+	{CCW_DEVICE(0x1731, 0x05), .driver_info = QETH_CARD_TYPE_IQD},
+	{CCW_DEVICE(0x1731, 0x06), .driver_info = QETH_CARD_TYPE_OSN},
 	{},
 };
 MODULE_DEVICE_TABLE(ccw, qeth_ids);
@@ -8378,7 +8380,7 @@ out:
 
 static struct notifier_block qeth_ip_notifier = {
 	qeth_ip_event,
-	0
+	NULL,
 };
 
 #ifdef CONFIG_QETH_IPV6
@@ -8431,7 +8433,7 @@ out:
 
 static struct notifier_block qeth_ip6_notifier = {
 	qeth_ip6_event,
-	0
+	NULL,
 };
 #endif
 
@@ -8458,7 +8460,7 @@ qeth_reboot_event(struct notifier_block *this, unsigned long event, void *ptr)
 
 static struct notifier_block qeth_reboot_notifier = {
 	qeth_reboot_event,
-	0
+	NULL,
 };
 
 static int
diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c
index 185a9cf..001497b 100644
--- a/drivers/s390/net/qeth_sys.c
+++ b/drivers/s390/net/qeth_sys.c
@@ -1755,7 +1755,7 @@ qeth_driver_group_store(struct device_driver *ddrv, const char *buf,
 }
 
 
-static DRIVER_ATTR(group, 0200, 0, qeth_driver_group_store);
+static DRIVER_ATTR(group, 0200, NULL, qeth_driver_group_store);
 
 static ssize_t
 qeth_driver_notifier_register_store(struct device_driver *ddrv, const char *buf,
@@ -1783,7 +1783,7 @@ qeth_driver_notifier_register_store(struct device_driver *ddrv, const char *buf,
 	return count;
 }
 
-static DRIVER_ATTR(notifier_register, 0200, 0,
+static DRIVER_ATTR(notifier_register, 0200, NULL,
 		   qeth_driver_notifier_register_store);
 
 int
diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c
index 72118ee..b8179c2 100644
--- a/drivers/s390/net/smsgiucv.c
+++ b/drivers/s390/net/smsgiucv.c
@@ -66,7 +66,7 @@ smsg_message_pending(iucv_MessagePending *eib, void *pgm_data)
 		return;
 	}
 	rc = iucv_receive(eib->ippathid, eib->ipmsgid, eib->iptrgcls,
-			  msg, len, 0, 0, 0);
+			  msg, len, NULL, NULL, NULL);
 	if (rc == 0) {
 		msg[len] = 0;
 		EBCASC(msg, len);
@@ -122,7 +122,7 @@ smsg_unregister_callback(char *prefix, void (*callback)(char *from, char *str))
 	struct smsg_callback *cb, *tmp;
 
 	spin_lock(&smsg_list_lock);
-	cb = 0;
+	cb = NULL;
 	list_for_each_entry(tmp, &smsg_list, list)
 		if (tmp->callback == callback &&
 		    strcmp(tmp->prefix, prefix) == 0) {
@@ -139,7 +139,7 @@ smsg_exit(void)
 {
 	if (smsg_handle > 0) {
 		cpcmd("SET SMSG OFF", NULL, 0, NULL);
-		iucv_sever(smsg_pathid, 0);
+		iucv_sever(smsg_pathid, NULL);
 		iucv_unregister_program(smsg_handle);
 		driver_unregister(&smsg_driver);
 	}
@@ -162,19 +162,19 @@ smsg_init(void)
 		return rc;
 	}
 	smsg_handle = iucv_register_program("SMSGIUCV        ", "*MSG    ",
-					    pgmmask, &smsg_ops, 0);
+					    pgmmask, &smsg_ops, NULL);
 	if (!smsg_handle) {
 		printk(KERN_ERR "SMSGIUCV: failed to register to iucv");
 		driver_unregister(&smsg_driver);
 		return -EIO;	/* better errno ? */
 	}
-	rc = iucv_connect (&smsg_pathid, 255, 0, "*MSG    ", 0, 0, 0, 0,
-			   smsg_handle, 0);
+	rc = iucv_connect (&smsg_pathid, 255, NULL, "*MSG    ", NULL, 0,
+			   NULL, NULL, smsg_handle, NULL);
 	if (rc) {
 		printk(KERN_ERR "SMSGIUCV: failed to connect to *MSG");
 		iucv_unregister_program(smsg_handle);
 		driver_unregister(&smsg_driver);
-		smsg_handle = 0;
+		smsg_handle = NULL;
 		return -EIO;
 	}
 	cpcmd("SET SMSG IUCV", NULL, 0, NULL);
diff --git a/drivers/s390/s390mach.c b/drivers/s390/s390mach.c
index ffb3677..5399c5d 100644
--- a/drivers/s390/s390mach.c
+++ b/drivers/s390/s390mach.c
@@ -111,6 +111,16 @@ repeat:
 			break;
 		case CRW_RSC_CPATH:
 			pr_debug("source is channel path %02X\n", crw[0].rsid);
+			/*
+			 * Check for solicited machine checks. These are
+			 * created by reset channel path and need not be
+			 * reported to the common I/O layer.
+			 */
+			if (crw[chain].slct) {
+				DBG(KERN_INFO"solicited machine check for "
+				    "channel path %02X\n", crw[0].rsid);
+				break;
+			}
 			switch (crw[0].erc) {
 			case CRW_ERC_IPARM: /* Path has come. */
 				ret = chp_process_crw(crw[0].rsid, 1);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 6335f92..31db2b0 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -2227,7 +2227,7 @@ zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action,
 	/* setup new FSF request */
 	retval = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
 				     erp_action ? ZFCP_REQ_AUTO_CLEANUP : 0,
-				     0, &lock_flags, &fsf_req);
+				     NULL, &lock_flags, &fsf_req);
 	if (retval < 0) {
 		ZFCP_LOG_INFO("error: Out of resources. Could not create an "
                               "exchange port data request for"
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 46e14f2..671f4a6 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -44,30 +44,29 @@ struct scsi_transport_template *zfcp_transport_template;
 
 struct zfcp_data zfcp_data = {
 	.scsi_host_template = {
-	      name:	               ZFCP_NAME,
-	      proc_name:               "zfcp",
-	      proc_info:               NULL,
-	      detect:	               NULL,
-	      slave_alloc:             zfcp_scsi_slave_alloc,
-	      slave_configure:         zfcp_scsi_slave_configure,
-	      slave_destroy:           zfcp_scsi_slave_destroy,
-	      queuecommand:            zfcp_scsi_queuecommand,
-	      eh_abort_handler:        zfcp_scsi_eh_abort_handler,
-	      eh_device_reset_handler: zfcp_scsi_eh_device_reset_handler,
-	      eh_bus_reset_handler:    zfcp_scsi_eh_bus_reset_handler,
-	      eh_host_reset_handler:   zfcp_scsi_eh_host_reset_handler,
-			               /* FIXME(openfcp): Tune */
-	      can_queue:               4096,
-	      this_id:	               -1,
-	      /*
-	       * FIXME:
-	       * one less? can zfcp_create_sbale cope with it?
-	       */
-	      sg_tablesize:            ZFCP_MAX_SBALES_PER_REQ,
-	      cmd_per_lun:             1,
-	      unchecked_isa_dma:       0,
-	      use_clustering:          1,
-	      sdev_attrs:              zfcp_sysfs_sdev_attrs,
+		.name			= ZFCP_NAME,
+		.proc_name		= "zfcp",
+		.proc_info		= NULL,
+		.detect			= NULL,
+		.slave_alloc		= zfcp_scsi_slave_alloc,
+		.slave_configure	= zfcp_scsi_slave_configure,
+		.slave_destroy		= zfcp_scsi_slave_destroy,
+		.queuecommand		= zfcp_scsi_queuecommand,
+		.eh_abort_handler	= zfcp_scsi_eh_abort_handler,
+		.eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler,
+		.eh_bus_reset_handler	= zfcp_scsi_eh_bus_reset_handler,
+		.eh_host_reset_handler	= zfcp_scsi_eh_host_reset_handler,
+		.can_queue		= 4096,
+		.this_id		= -1,
+		/*
+		 * FIXME:
+		 * one less? can zfcp_create_sbale cope with it?
+		 */
+		.sg_tablesize		= ZFCP_MAX_SBALES_PER_REQ,
+		.cmd_per_lun		= 1,
+		.unchecked_isa_dma	= 0,
+		.use_clustering		= 1,
+		.sdev_attrs		= zfcp_sysfs_sdev_attrs,
 	},
 	.driver_version = ZFCP_VERSION,
 	/* rest initialised with zeros */
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h
index 9e871de..601340d 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.h
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.h
@@ -93,7 +93,6 @@
 #endif
 
 /********************************** Misc Macros *******************************/
-#define	roundup(x, y)   ((((x)+((y)-1))/(y))*(y))
 #define	powerof2(x)	((((x)-1)&(x))==0)
 
 /************************* Forward Declarations *******************************/
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0995430..0ae9ced 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -299,6 +299,7 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
 
 static unsigned int serial_in(struct uart_8250_port *up, int offset)
 {
+	unsigned int tmp;
 	offset = map_8250_in_reg(up, offset) << up->port.regshift;
 
 	switch (up->port.iotype) {
@@ -317,6 +318,13 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset)
 		return __raw_readl(up->port.membase + offset);
 #endif
 
+	case UPIO_TSI:
+		if (offset == UART_IIR) {
+			tmp = readl((u32 *)(up->port.membase + UART_RX));
+			return (cpu_to_le32(tmp) >> 8) & 0xff;
+		} else
+			return readb(up->port.membase + offset);
+
 	default:
 		return inb(up->port.iobase + offset);
 	}
@@ -346,6 +354,10 @@ serial_out(struct uart_8250_port *up, int offset, int value)
 		__raw_writel(value, up->port.membase + offset);
 		break;
 #endif
+	case UPIO_TSI:
+		if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+			writeb(value, up->port.membase + offset);
+		break;
 
 	default:
 		outb(value, up->port.iobase + offset);
@@ -2240,10 +2252,14 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 
 	touch_nmi_watchdog();
 
-	if (oops_in_progress) {
-		locked = spin_trylock_irqsave(&up->port.lock, flags);
+	local_irq_save(flags);
+	if (up->port.sysrq) {
+		/* serial8250_handle_port() already took the lock */
+		locked = 0;
+	} else if (oops_in_progress) {
+		locked = spin_trylock(&up->port.lock);
 	} else
-		spin_lock_irqsave(&up->port.lock, flags);
+		spin_lock(&up->port.lock);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -2265,7 +2281,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 	serial_out(up, UART_IER, ier);
 
 	if (locked)
-		spin_unlock_irqrestore(&up->port.lock, flags);
+		spin_unlock(&up->port.lock);
+	local_irq_restore(flags);
 }
 
 static int serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index d119c82..8a98aae 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -673,7 +673,7 @@ static void dz_reset(struct dz_port *dport)
 }
 
 #ifdef CONFIG_SERIAL_DZ_CONSOLE
-static void dz_console_putchar(struct uart_port *port, int ch)
+static void dz_console_putchar(struct uart_port *uport, int ch)
 {
 	struct dz_port *dport = (struct dz_port *)uport;
 	unsigned long flags;
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 3420428..5ff269f 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -1143,9 +1143,8 @@ static void __init ip22zilog_prepare(void)
 		up[(chip * 2) + 1].port.fifosize = 1;
 		up[(chip * 2) + 1].port.ops = &ip22zilog_pops;
 		up[(chip * 2) + 1].port.type = PORT_IP22ZILOG;
-		up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
 		up[(chip * 2) + 1].port.line = (chip * 2) + 1;
-		up[(chip * 2) + 1].flags = 0;
+		up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
 	}
 }
 
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index d5f636f..80ef7d4 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2036,6 +2036,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 	case UPIO_MEM:
 	case UPIO_MEM32:
 	case UPIO_AU:
+	case UPIO_TSI:
 		snprintf(address, sizeof(address),
 			 "MMIO 0x%lx", port->mapbase);
 		break;
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 0dbd4df..979497f 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -1052,7 +1052,7 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id *
 	if (err)
 		return err;
 
-	err = sunsab_init_one(&up[0], op, 0,
+	err = sunsab_init_one(&up[1], op, 0,
 			      (inst * 2) + 1);
 	if (err) {
 		of_iounmap(up[0].port.membase,
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index f9013ba..d3a5aee 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1200,6 +1200,11 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up)
 	if (up->port.type == PORT_UNKNOWN)
 		return -ENODEV;
 
+	printk("%s: %s port at %lx, irq %u\n",
+	       to_of_device(up->port.dev)->node->full_name,
+	       (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
+	       up->port.mapbase, up->port.irq);
+
 #ifdef CONFIG_SERIO
 	serio = &up->serio;
 	serio->port_data = up;
@@ -1406,25 +1411,35 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 	struct device_node *dp = op->node;
 	struct uart_sunsu_port *up;
 	struct resource *rp;
+	enum su_type type;
 	int err;
 
-	if (inst >= UART_NR)
-		return -EINVAL;
+	type = su_get_type(dp);
+	if (type == SU_PORT_PORT) {
+		if (inst >= UART_NR)
+			return -EINVAL;
+		up = &sunsu_ports[inst];
+	} else {
+		up = kzalloc(sizeof(*up), GFP_KERNEL);
+		if (!up)
+			return -ENOMEM;
+	}
 
-	up = &sunsu_ports[inst];
 	up->port.line = inst;
 
 	spin_lock_init(&up->port.lock);
 
-	up->su_type = su_get_type(dp);
+	up->su_type = type;
 
 	rp = &op->resource[0];
-	up->port.mapbase = op->resource[0].start;
-
+	up->port.mapbase = rp->start;
 	up->reg_size = (rp->end - rp->start) + 1;
 	up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
-	if (!up->port.membase)
+	if (!up->port.membase) {
+		if (type != SU_PORT_PORT)
+			kfree(up);
 		return -ENOMEM;
+	}
 
 	up->port.irq = op->irqs[0];
 
@@ -1436,8 +1451,11 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 	err = 0;
 	if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
 		err = sunsu_kbd_ms_init(up);
-		if (err)
+		if (err) {
+			kfree(up);
 			goto out_unmap;
+		}
+		dev_set_drvdata(&op->dev, up);
 
 		return 0;
 	}
@@ -1476,8 +1494,12 @@ static int __devexit su_remove(struct of_device *dev)
 #ifdef CONFIG_SERIO
 		serio_unregister_port(&up->serio);
 #endif
-	} else if (up->port.type != PORT_UNKNOWN)
+		kfree(up);
+	} else if (up->port.type != PORT_UNKNOWN) {
 		uart_remove_one_port(&sunsu_reg, &up->port);
+	}
+
+	dev_set_drvdata(&dev->dev, NULL);
 
 	return 0;
 }
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index e93d0ed..6c8b0ea 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -38,6 +38,7 @@
 #include <linux/tty_flip.h>
 
 #include <asm/io.h>
+#include <asm/vr41xx/irq.h>
 #include <asm/vr41xx/siu.h>
 #include <asm/vr41xx/vr41xx.h>
 
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7fdbc5d..2ee742d 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -23,6 +23,7 @@ config USB_ARCH_HAS_OHCI
 	default y if ARCH_LH7A404
 	default y if ARCH_S3C2410
 	default y if PXA27x
+	default y if ARCH_EP93XX
 	default y if ARCH_AT91RM9200
 	# PPC:
 	default y if STB03xxx
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index c7123bf..4710eb0 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -48,7 +48,7 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB_AUERSWALD)	+= misc/
-obj-$(CONFIG_USB_CY7C63)	+= misc/
+obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
 obj-$(CONFIG_USB_CYTHERM)	+= misc/
 obj-$(CONFIG_USB_EMI26)		+= misc/
 obj-$(CONFIG_USB_EMI62)		+= misc/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 3670d77..ca90326 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -291,13 +291,13 @@ static void acm_read_bulk(struct urb *urb, struct pt_regs *regs)
 	struct acm_ru *rcv = urb->context;
 	struct acm *acm = rcv->instance;
 	int status = urb->status;
-	dbg("Entering acm_read_bulk with status %d\n", urb->status);
+	dbg("Entering acm_read_bulk with status %d", urb->status);
 
 	if (!ACM_READY(acm))
 		return;
 
 	if (status)
-		dev_dbg(&acm->data->dev, "bulk rx status %d\n", status);
+		dev_dbg(&acm->data->dev, "bulk rx status %d", status);
 
 	buf = rcv->buffer;
 	buf->size = urb->actual_length;
@@ -343,7 +343,7 @@ next_buffer:
 	list_del(&buf->list);
 	spin_unlock(&acm->read_lock);
 
-	dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d\n", buf, buf->size);
+	dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
 
 	tty_buffer_request_room(tty, buf->size);
 	if (!acm->throttle)
@@ -394,7 +394,7 @@ urbs:
 		rcv->urb->transfer_dma = buf->dma;
 		rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-		dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p\n", rcv->urb, rcv, buf);
+		dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p", rcv->urb, rcv, buf);
 
 		/* This shouldn't kill the driver as unsuccessful URBs are returned to the
 		   free-urbs-pool and resubmited ASAP */
@@ -413,7 +413,7 @@ static void acm_write_bulk(struct urb *urb, struct pt_regs *regs)
 {
 	struct acm *acm = (struct acm *)urb->context;
 
-	dbg("Entering acm_write_bulk with status %d\n", urb->status);
+	dbg("Entering acm_write_bulk with status %d", urb->status);
 
 	acm_write_done(acm);
 	acm_write_start(acm);
@@ -424,7 +424,7 @@ static void acm_write_bulk(struct urb *urb, struct pt_regs *regs)
 static void acm_softint(void *private)
 {
 	struct acm *acm = private;
-	dbg("Entering acm_softint.\n");
+	dbg("Entering acm_softint.");
 	
 	if (!ACM_READY(acm))
 		return;
@@ -440,7 +440,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	struct acm *acm;
 	int rv = -EINVAL;
 	int i;
-	dbg("Entering acm_tty_open.\n");
+	dbg("Entering acm_tty_open.");
 
 	mutex_lock(&open_mutex);
 
@@ -541,7 +541,7 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c
 	int wbn;
 	struct acm_wb *wb;
 
-	dbg("Entering acm_tty_write to write %d bytes,\n", count);
+	dbg("Entering acm_tty_write to write %d bytes,", count);
 
 	if (!ACM_READY(acm))
 		return -EINVAL;
@@ -793,7 +793,7 @@ static int acm_probe (struct usb_interface *intf,
 
 	if (!buflen) {
 		if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
-			dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
+			dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint");
 			buflen = intf->cur_altsetting->endpoint->extralen;
 			buffer = intf->cur_altsetting->endpoint->extra;
 		} else {
@@ -842,24 +842,24 @@ next_desc:
 
 	if (!union_header) {
 		if (call_interface_num > 0) {
-			dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
+			dev_dbg(&intf->dev,"No union descriptor, using call management descriptor");
 			data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
 			control_interface = intf;
 		} else {
-			dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+			dev_dbg(&intf->dev,"No union descriptor, giving up");
 			return -ENODEV;
 		}
 	} else {
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
 		data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
 		if (!control_interface || !data_interface) {
-			dev_dbg(&intf->dev,"no interfaces\n");
+			dev_dbg(&intf->dev,"no interfaces");
 			return -ENODEV;
 		}
 	}
 	
 	if (data_interface_num != call_interface_num)
-		dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n");
+		dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.");
 
 skip_normal_probe:
 
@@ -867,7 +867,7 @@ skip_normal_probe:
 	if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
 		if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
 			struct usb_interface *t;
-			dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
+			dev_dbg(&intf->dev,"Your device has switched interfaces.");
 
 			t = control_interface;
 			control_interface = data_interface;
@@ -878,7 +878,7 @@ skip_normal_probe:
 	}
 	
 	if (usb_interface_claimed(data_interface)) { /* valid in this context */
-		dev_dbg(&intf->dev,"The data interface isn't available\n");
+		dev_dbg(&intf->dev,"The data interface isn't available");
 		return -EBUSY;
 	}
 
@@ -895,7 +895,7 @@ skip_normal_probe:
 	if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) {
 		/* descriptors are swapped */
 		struct usb_endpoint_descriptor *t;
-		dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
+		dev_dbg(&intf->dev,"The data interface has switched endpoints");
 		
 		t = epread;
 		epread = epwrite;
@@ -910,7 +910,7 @@ skip_normal_probe:
 	}
 
 	if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
-		dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
+		dev_dbg(&intf->dev, "out of memory (acm kzalloc)");
 		goto alloc_fail;
 	}
 
@@ -936,26 +936,26 @@ skip_normal_probe:
 
 	buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
 	if (!buf) {
-		dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n");
+		dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)");
 		goto alloc_fail2;
 	}
 	acm->ctrl_buffer = buf;
 
 	if (acm_write_buffers_alloc(acm) < 0) {
-		dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n");
+		dev_dbg(&intf->dev, "out of memory (write buffer alloc)");
 		goto alloc_fail4;
 	}
 
 	acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!acm->ctrlurb) {
-		dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n");
+		dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)");
 		goto alloc_fail5;
 	}
 	for (i = 0; i < num_rx_buf; i++) {
 		struct acm_ru *rcv = &(acm->ru[i]);
 
 		if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
-			dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
+			dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)");
 			goto alloc_fail7;
 		}
 
@@ -966,13 +966,13 @@ skip_normal_probe:
 		struct acm_rb *buf = &(acm->rb[i]);
 
 		if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
-			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
+			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)");
 			goto alloc_fail7;
 		}
 	}
 	acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!acm->writeurb) {
-		dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n");
+		dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)");
 		goto alloc_fail7;
 	}
 
@@ -1086,6 +1086,9 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */
 	.driver_info = SINGLE_RX_URB, /* firmware bug */
 	},
+	{ USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
+	.driver_info = SINGLE_RX_URB, /* firmware bug */
+	},
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_V25TER) },
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index a08787e..6e3b535 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -31,9 +31,6 @@ config USB_DEVICEFS
 	  For the format of the various /proc/bus/usb/ files, please read
 	  <file:Documentation/usb/proc_usb_info.txt>.
 
-	  Please note that this code is completely unrelated to devfs, the
-	  "/dev file system support".
-
 	  Most users want to say Y here.
 
 config USB_BANDWIDTH
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 875596e..26c8cb5 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1790,7 +1790,10 @@ static int finish_device_resume(struct usb_device *udev)
 	 * and device drivers will know about any resume quirks.
 	 */
 	status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
-	if (status < 2)
+	if (status >= 0)
+		status = (status == 2 ? 0 : -ENODEV);
+
+	if (status)
 		dev_dbg(&udev->dev,
 			"gone after usb resume? status %d\n",
 			status);
@@ -1879,7 +1882,12 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
 			dev_dbg(hub->intfdev,
 				"port %d status %04x.%04x after resume, %d\n",
 				port1, portchange, devstatus, status);
+			if (status >= 0)
+				status = -ENODEV;
 		} else {
+			if (portchange & USB_PORT_STAT_C_SUSPEND)
+				clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_C_SUSPEND);
 			/* TRSMRCY = 10 msec */
 			msleep(10);
 			if (udev)
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index f48c3db..3182c22 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -695,7 +695,7 @@ static void usbfs_remove_device(struct usb_device *dev)
 		wake_up_all(&ds->wait);
 		list_del_init(&ds->list);
 		if (ds->discsignr) {
-			sinfo.si_signo = SIGPIPE;
+			sinfo.si_signo = ds->discsignr;
 			sinfo.si_errno = EPIPE;
 			sinfo.si_code = SI_ASYNCIO;
 			sinfo.si_addr = ds->disccontext;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index f7c6d75..53d5845 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -34,12 +34,12 @@
 
 
 /* we must assign addresses for configurable endpoints (like net2280) */
-static __initdata unsigned epnum;
+static __devinitdata unsigned epnum;
 
 // #define MANY_ENDPOINTS
 #ifdef MANY_ENDPOINTS
 /* more than 15 configurable endpoints */
-static __initdata unsigned in_epnum;
+static __devinitdata unsigned in_epnum;
 #endif
 
 
@@ -59,7 +59,7 @@ static __initdata unsigned in_epnum;
  * NOTE:  each endpoint is unidirectional, as specified by its USB
  * descriptor; and isn't specific to a configuration or altsetting.
  */
-static int __init
+static int __devinit
 ep_matches (
 	struct usb_gadget		*gadget,
 	struct usb_ep			*ep,
@@ -73,7 +73,7 @@ ep_matches (
 	/* endpoint already claimed? */
 	if (0 != ep->driver_data)
 		return 0;
-		
+
 	/* only support ep0 for portable CONTROL traffic */
 	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
 	if (USB_ENDPOINT_XFER_CONTROL == type)
@@ -186,7 +186,7 @@ ep_matches (
 	return 1;
 }
 
-static struct usb_ep * __init
+static struct usb_ep * __devinit
 find_ep (struct usb_gadget *gadget, const char *name)
 {
 	struct usb_ep	*ep;
@@ -228,7 +228,7 @@ find_ep (struct usb_gadget *gadget, const char *name)
  *
  * On failure, this returns a null endpoint descriptor.
  */
-struct usb_ep * __init usb_ep_autoconfig (
+struct usb_ep * __devinit usb_ep_autoconfig (
 	struct usb_gadget		*gadget,
 	struct usb_endpoint_descriptor	*desc
 )
@@ -276,7 +276,7 @@ struct usb_ep * __init usb_ep_autoconfig (
 			return ep;
 	}
 
-	/* Second, look at endpoints until an unclaimed one looks usable */ 
+	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
 		if (ep_matches (gadget, ep, desc))
 			return ep;
@@ -295,7 +295,7 @@ struct usb_ep * __init usb_ep_autoconfig (
  * state such as ep->driver_data and the record of assigned endpoints
  * used by usb_ep_autoconfig().
  */
-void __init usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+void __devinit usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 {
 	struct usb_ep	*ep;
 
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 8320fce..4fe1bec 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2131,7 +2131,7 @@ eth_req_free (struct usb_ep *ep, struct usb_request *req)
 }
 
 
-static void __exit
+static void /* __init_or_exit */
 eth_unbind (struct usb_gadget *gadget)
 {
 	struct eth_dev		*dev = get_gadget_data (gadget);
@@ -2158,7 +2158,7 @@ eth_unbind (struct usb_gadget *gadget)
 	set_gadget_data (gadget, NULL);
 }
 
-static u8 __init nibble (unsigned char c)
+static u8 __devinit nibble (unsigned char c)
 {
 	if (likely (isdigit (c)))
 		return c - '0';
@@ -2168,7 +2168,7 @@ static u8 __init nibble (unsigned char c)
 	return 0;
 }
 
-static int __init get_ether_addr(const char *str, u8 *dev_addr)
+static int __devinit get_ether_addr(const char *str, u8 *dev_addr)
 {
 	if (str) {
 		unsigned	i;
@@ -2189,7 +2189,7 @@ static int __init get_ether_addr(const char *str, u8 *dev_addr)
 	return 1;
 }
 
-static int __init
+static int __devinit
 eth_bind (struct usb_gadget *gadget)
 {
 	struct eth_dev		*dev;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index b1a9cf0..8d7f1e8 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3691,7 +3691,7 @@ static void lun_release(struct device *dev)
 	kref_put(&fsg->ref, fsg_release);
 }
 
-static void __exit fsg_unbind(struct usb_gadget *gadget)
+static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
 {
 	struct fsg_dev		*fsg = get_gadget_data(gadget);
 	int			i;
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 354670d..408c338 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -1398,7 +1398,7 @@ static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS];
 #endif	/* CONFIG_USB_GADGET_DEBUG_FILES */
 
 
-int __init rndis_init (void)
+int __devinit rndis_init (void)
 {
 	u8 i;
 
diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h
index 2956608..4c3c725 100644
--- a/drivers/usb/gadget/rndis.h
+++ b/drivers/usb/gadget/rndis.h
@@ -264,7 +264,7 @@ int  rndis_signal_disconnect (int configNr);
 int  rndis_state (int configNr);
 extern void rndis_set_host_mac (int configNr, const u8 *addr);
 
-int __init rndis_init (void);
+int __devinit rndis_init (void);
 void rndis_exit (void);
 
 #endif  /* _LINUX_RNDIS_H */
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 30d7664..e762aa1 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -1473,7 +1473,7 @@ autoconf_fail:
  * Called on module unload.  Frees the control request and device
  * structure.
  */
-static void __exit gs_unbind(struct usb_gadget *gadget)
+static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
 {
 	struct gs_dev *dev = get_gadget_data(gadget);
 
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 3a08a7a..b7018ee 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1121,7 +1121,7 @@ zero_autoresume (unsigned long _dev)
 
 /*-------------------------------------------------------------------------*/
 
-static void __exit
+static void /* __init_or_exit */
 zero_unbind (struct usb_gadget *gadget)
 {
 	struct zero_dev		*dev = get_gadget_data (gadget);
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index d66867a..26ed757 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -41,8 +41,6 @@
 #endif
 #define USBH_DISABLE      (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
 
-#endif				/* Au1200 */
-
 extern int usb_disabled(void);
 
 /*-------------------------------------------------------------------------*/
@@ -107,9 +105,9 @@ int usb_ehci_au1xxx_probe(const struct hc_driver *driver,
 
 	/* Au1200 AB USB does not support coherent memory */
 	if (!(read_c0_prid() & 0xff)) {
-		pr_info("%s: this is chip revision AB!\n", dev->dev.name);
+		pr_info("%s: this is chip revision AB!\n", dev->name);
 		pr_info("%s: update your board or re-configure the kernel\n",
-			dev->dev.name);
+			dev->name);
 		return -ENODEV;
 	}
 #endif
@@ -228,9 +226,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int ehci_hcd_au1xxx_drv_probe(struct device *dev)
+static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
 	struct usb_hcd *hcd = NULL;
 	int ret;
 
@@ -243,10 +240,9 @@ static int ehci_hcd_au1xxx_drv_probe(struct device *dev)
 	return ret;
 }
 
-static int ehci_hcd_au1xxx_drv_remove(struct device *dev)
+static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	usb_ehci_au1xxx_remove(hcd, pdev);
 	return 0;
@@ -269,12 +265,13 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 }
 */
 MODULE_ALIAS("au1xxx-ehci");
-/* FIXME use "struct platform_driver" */
-static struct device_driver ehci_hcd_au1xxx_driver = {
-	.name = "au1xxx-ehci",
-	.bus = &platform_bus_type,
+static struct platform_driver ehci_hcd_au1xxx_driver = {
 	.probe = ehci_hcd_au1xxx_drv_probe,
 	.remove = ehci_hcd_au1xxx_drv_remove,
 	/*.suspend      = ehci_hcd_au1xxx_drv_suspend, */
 	/*.resume       = ehci_hcd_au1xxx_drv_resume, */
+	.driver = {
+		.name = "au1xxx-ehci",
+		.bus = &platform_bus_type
+	}
 };
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index cee6f53..85b0b4a 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -625,10 +625,11 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
 			writel (status | CMD_RUN, &ehci->regs->command);
 
 		while (i--) {
-			status = readl (&ehci->regs->port_status [i]);
-			if (status & PORT_OWNER)
+			int pstatus = readl (&ehci->regs->port_status [i]);
+
+			if (pstatus & PORT_OWNER)
 				continue;
-			if (!(status & PORT_RESUME)
+			if (!(pstatus & PORT_RESUME)
 					|| ehci->reset_done [i] != 0)
 				continue;
 
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 689261e..822914e 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -101,13 +101,16 @@ static void au1xxx_start_ohc(struct platform_device *dev)
 
 #endif  /* Au1200 */
 
+#ifndef CONFIG_SOC_AU1200
 	/* wait for reset complete (read register twice; see au1500 errata) */
 	while (au_readl(USB_HOST_CONFIG),
 		!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
+#endif
 		udelay(1000);
 
 	printk(KERN_DEBUG __FILE__
 	": Clock to USB host has been enabled \n");
+#endif
 }
 
 static void au1xxx_stop_ohc(struct platform_device *dev)
@@ -157,9 +160,9 @@ static int usb_ohci_au1xxx_probe(const struct hc_driver *driver,
 	/* Au1200 AB USB does not support coherent memory */
 	if (!(read_c0_prid() & 0xff)) {
 		pr_info("%s: this is chip revision AB !!\n",
-			dev->dev.name);
+			dev->name);
 		pr_info("%s: update your board or re-configure the kernel\n",
-			dev->dev.name);
+			dev->name);
 		return -ENODEV;
 	}
 #endif
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
new file mode 100644
index 0000000..6531c4d
--- /dev/null
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -0,0 +1,225 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * Bus Glue for ep93xx.
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ *
+ * Modified for pxa27x from ohci-lh7a404.c
+ *  by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
+ *
+ * Modified for ep93xx from ohci-pxa27x.c
+ *  by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006
+ *  Based on an earlier driver by Ray Lehtiniemi
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+static struct clk *usb_host_clock;
+
+static void ep93xx_start_hc(struct device *dev)
+{
+	clk_enable(usb_host_clock);
+}
+
+static void ep93xx_stop_hc(struct device *dev)
+{
+	clk_disable(usb_host_clock);
+}
+
+static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
+			 struct platform_device *pdev)
+{
+	int retval;
+	struct usb_hcd *hcd;
+
+	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		return -ENOMEM;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, "ep93xx");
+	if (hcd == NULL)
+		return -ENOMEM;
+
+	hcd->rsrc_start = pdev->resource[0].start;
+	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		usb_put_hcd(hcd);
+		retval = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		pr_debug("ioremap failed");
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	usb_host_clock = clk_get(&pdev->dev, "usb_host");
+	ep93xx_start_hc(&pdev->dev);
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
+	if (retval == 0)
+		return retval;
+
+	ep93xx_stop_hc(&pdev->dev);
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+
+	return retval;
+}
+
+static void usb_hcd_ep93xx_remove(struct usb_hcd *hcd,
+			struct platform_device *pdev)
+{
+	usb_remove_hcd(hcd);
+	ep93xx_stop_hc(&pdev->dev);
+	clk_put(usb_host_clock);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	if ((ret = ohci_init(ohci)) < 0)
+		return ret;
+
+	if ((ret = ohci_run(ohci)) < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct hc_driver ohci_ep93xx_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "EP93xx OHCI",
+	.hcd_priv_size		= sizeof(struct ohci_hcd),
+	.irq			= ohci_irq,
+	.flags			= HCD_USB11 | HCD_MEMORY,
+	.start			= ohci_ep93xx_start,
+	.stop			= ohci_stop,
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+	.get_frame_number	= ohci_get_frame,
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+extern int usb_disabled(void);
+
+static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = -ENODEV;
+	if (!usb_disabled())
+		ret = usb_hcd_ep93xx_probe(&ohci_ep93xx_hc_driver, pdev);
+
+	return ret;
+}
+
+static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_hcd_ep93xx_remove(hcd, pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ochi_hcd *ohci = hcd_to_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ep93xx_stop_hc(&pdev->dev);
+	hcd->state = HC_STATE_SUSPENDED;
+	pdev->dev.power.power_state = PMSG_SUSPEND;
+
+	return 0;
+}
+
+static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int status;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ep93xx_start_hc(&pdev->dev);
+	pdev->dev.power.power_state = PMSG_ON;
+	usb_hcd_resume_root_hub(hcd);
+
+	return 0;
+}
+#endif
+
+
+static struct platform_driver ohci_hcd_ep93xx_driver = {
+	.probe		= ohci_hcd_ep93xx_drv_probe,
+	.remove		= ohci_hcd_ep93xx_drv_remove,
+#ifdef CONFIG_PM
+	.suspend	= ohci_hcd_ep93xx_drv_suspend,
+	.resume		= ohci_hcd_ep93xx_drv_resume,
+#endif
+	.driver		= {
+		.name	= "ep93xx-ohci",
+	},
+};
+
+static int __init ohci_hcd_ep93xx_init(void)
+{
+	return platform_driver_register(&ohci_hcd_ep93xx_driver);
+}
+
+static void __exit ohci_hcd_ep93xx_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_ep93xx_driver);
+}
+
+module_init(ohci_hcd_ep93xx_init);
+module_exit(ohci_hcd_ep93xx_cleanup);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 8fb842e..afef5ac 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -901,6 +901,10 @@ MODULE_LICENSE ("GPL");
 #include "ohci-pxa27x.c"
 #endif
 
+#ifdef CONFIG_ARCH_EP93XX
+#include "ohci-ep93xx.c"
+#endif
+
 #ifdef CONFIG_SOC_AU1X00
 #include "ohci-au1xxx.c"
 #endif
@@ -919,6 +923,7 @@ MODULE_LICENSE ("GPL");
       || defined(CONFIG_ARCH_OMAP) \
       || defined (CONFIG_ARCH_LH7A404) \
       || defined (CONFIG_PXA27x) \
+      || defined (CONFIG_ARCH_EP93XX) \
       || defined (CONFIG_SOC_AU1X00) \
       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
       || defined (CONFIG_ARCH_AT91RM9200) \
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 0bb972b58..5b0a23f 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -581,14 +581,14 @@ static int ohci_hub_control (
 		break;
 	case GetHubStatus:
 		temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
-		*(__le32 *) buf = cpu_to_le32 (temp);
+		put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
 		break;
 	case GetPortStatus:
 		if (!wIndex || wIndex > ports)
 			goto error;
 		wIndex--;
 		temp = roothub_portstatus (ohci, wIndex);
-		*(__le32 *) buf = cpu_to_le32 (temp);
+		put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
 
 #ifndef	OHCI_VERBOSE_DEBUG
 	if (*(u16*)(buf+2))	/* only if wPortChange is interesting */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index dff6056..2086165 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -167,8 +167,6 @@ static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx)
 static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 {
 	void __iomem *base;
-	int wait_time;
-	u32 control;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -179,9 +177,10 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 
 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
 #ifndef __hppa__
-	control = readl(base + OHCI_CONTROL);
+{
+	u32 control = readl(base + OHCI_CONTROL);
 	if (control & OHCI_CTRL_IR) {
-		wait_time = 500; /* arbitrary; 5 seconds */
+		int wait_time = 500; /* arbitrary; 5 seconds */
 		writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
 		writel(OHCI_OCR, base + OHCI_CMDSTATUS);
 		while (wait_time > 0 &&
@@ -198,6 +197,7 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 		/* reset controller, preserving RWC */
 		writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
 	}
+}
 #endif
 
 	/*
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index b9fb968..8ea9c91 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1507,6 +1507,9 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_DEVICE_ID_4_PHIDGETSERVO_20	0x8104
 #define USB_DEVICE_ID_DUAL_USB_JOYPAD   0x8866
 
+#define USB_VENDOR_ID_WISEGROUP_LTD	0x6677
+#define USB_DEVICE_ID_SMARTJOY_DUAL_PLUS 0x8802
+
 #define USB_VENDOR_ID_CODEMERCS		0x07c0
 #define USB_DEVICE_ID_CODEMERCS_IOW40	0x1500
 #define USB_DEVICE_ID_CODEMERCS_IOW24	0x1501
@@ -1670,6 +1673,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
 	{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index daa486d..88928a4 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -88,19 +88,19 @@ config USB_LED
 	  To compile this driver as a module, choose M here: the
 	  module will be called usbled.
 
-config USB_CY7C63
+config USB_CYPRESS_CY7C63
 	tristate "Cypress CY7C63xxx USB driver support"
 	depends on USB
 	help
 	  Say Y here if you want to connect a Cypress CY7C63xxx
-	  micro controller to your computer's USB port. This driver
-	  supports the pre-programmed devices (incl. firmware) by
-	  AK Modul-Bus Computer GmbH.
+	  micro controller to your computer's USB port. Currently this
+	  driver supports the pre-programmed devices (incl. firmware)
+	  by AK Modul-Bus Computer GmbH.
 
 	  Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called cy7c63.
+	  module will be called cypress_cy7c63.
 
 config USB_CYTHERM
 	tristate "Cypress USB thermometer driver support"
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index f25a972..2927260 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -4,7 +4,7 @@
 #
 
 obj-$(CONFIG_USB_AUERSWALD)	+= auerswald.o
-obj-$(CONFIG_USB_CY7C63)	+= cy7c63.o
+obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)	+= cytherm.o
 obj-$(CONFIG_USB_EMI26)		+= emi26.o
 obj-$(CONFIG_USB_EMI62)		+= emi62.o
diff --git a/drivers/usb/misc/cy7c63.c b/drivers/usb/misc/cy7c63.c
deleted file mode 100644
index 8a1c10b..0000000
--- a/drivers/usb/misc/cy7c63.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
-* cy7c63.c
-*
-* Copyright (c) 2006 Oliver Bock (bock@fh-wolfenbuettel.de)
-*
-*	This driver is based on the Cypress Thermometer USB Driver by
-*	Marcus Maul and the 2.0 version of Greg Kroah-Hartman's
-*	USB Skeleton driver.
-*
-*	Is is a generic driver for the Cypress CY7C63000 family.
-*	For the time being it enables you to toggle the single I/O ports
-*	of the device.
-*
-*	Supported vendors:	AK Modul-Bus Computer GmbH
-*	Supported devices:	CY7C63001A-PC (to be continued...)
-*	Supported functions:	Read/Write Ports (to be continued...)
-*
-*	Chipsets families:	CY7C63000, CY7C63001, CY7C63100, CY7C63101
-*
-*
-*	This program is free software; you can redistribute it and/or
-*	modify it under the terms of the GNU General Public License as
-*	published by the Free Software Foundation, version 2.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/usb.h>
-
-#define DRIVER_AUTHOR		"Oliver Bock (bock@fh-wolfenbuettel.de)"
-#define DRIVER_DESC		"Cypress CY7C63xxx USB driver"
-
-#define CY7C63_VENDOR_ID	0xa2c
-#define CY7C63_PRODUCT_ID	0x8
-
-#define CY7C63_READ_PORT	0x4
-#define CY7C63_WRITE_PORT	0x5
-#define CY7C63_READ_RAM		0x2
-#define CY7C63_WRITE_RAM	0x3
-#define CY7C63_READ_ROM		0x1
-
-#define CY7C63_READ_PORT_ID0	0
-#define CY7C63_WRITE_PORT_ID0	0
-#define CY7C63_READ_PORT_ID1	0x2
-#define CY7C63_WRITE_PORT_ID1	1
-
-#define CY7C63_MAX_REQSIZE	8
-
-
-/* table of devices that work with this driver */
-static struct usb_device_id cy7c63_table [] = {
-	{ USB_DEVICE(CY7C63_VENDOR_ID, CY7C63_PRODUCT_ID) },
-	{ }
-};
-MODULE_DEVICE_TABLE(usb, cy7c63_table);
-
-/* structure to hold all of our device specific stuff */
-struct cy7c63 {
-	struct usb_device *	udev;
-	char 			port0;
-	char			port1;
-};
-
-/* used to send usb control messages to device */
-int vendor_command(struct cy7c63 *dev, unsigned char request,
-			 unsigned char address, unsigned char data) {
-
-	int retval = 0;
-	unsigned int pipe;
-	unsigned char *iobuf;
-
-	/* allocate some memory for the i/o buffer*/
-	iobuf = kzalloc(CY7C63_MAX_REQSIZE, GFP_KERNEL);
-	if (!iobuf) {
-		dev_err(&dev->udev->dev, "Out of memory!\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
-
-	/* prepare usb control message and send it upstream */
-	pipe = usb_rcvctrlpipe(dev->udev, 0);
-	retval = usb_control_msg(dev->udev, pipe, request,
-				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
-				address, data, iobuf, CY7C63_MAX_REQSIZE,
-				USB_CTRL_GET_TIMEOUT);
-
-	/* store returned data (more READs to be added!) */
-	switch (request) {
-		case CY7C63_READ_PORT:
-			if (address == CY7C63_READ_PORT_ID0) {
-				dev->port0 = iobuf[1];
-				dev_dbg(&dev->udev->dev,
-					"READ_PORT0 returned: %d\n",dev->port0);
-			}
-			else if (address == CY7C63_READ_PORT_ID1) {
-				dev->port1 = iobuf[1];
-				dev_dbg(&dev->udev->dev,
-					"READ_PORT1 returned: %d\n",dev->port1);
-			}
-			break;
-	}
-
-	kfree(iobuf);
-error:
-	return retval;
-}
-
-#define get_set_port(num,read_id,write_id) \
-static ssize_t set_port##num(struct device *dev, struct device_attribute *attr,	\
-					const char *buf, size_t count) {	\
-										\
-	int value;								\
-	int result = 0;								\
-										\
-	struct usb_interface *intf = to_usb_interface(dev);			\
-	struct cy7c63 *cyp = usb_get_intfdata(intf);				\
-										\
-	dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", num);			\
-										\
-	/* validate input data */						\
-	if (sscanf(buf, "%d", &value) < 1) {					\
-		result = -EINVAL;						\
-		goto error;							\
-	}									\
-	if (value>255 || value<0) {						\
-		result = -EINVAL;						\
-		goto error;							\
-	}									\
-										\
-	result = vendor_command(cyp, CY7C63_WRITE_PORT, write_id,		\
-					 (unsigned char)value);			\
-										\
-	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n",result);	\
-error:										\
-	return result < 0 ? result : count;					\
-}										\
-										\
-static ssize_t get_port##num(struct device *dev,				\
-				 struct device_attribute *attr, char *buf) {	\
-										\
-	int result = 0;								\
-										\
-	struct usb_interface *intf = to_usb_interface(dev);			\
-	struct cy7c63 *cyp = usb_get_intfdata(intf);				\
-										\
-	dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", num);			\
-										\
-	result = vendor_command(cyp, CY7C63_READ_PORT, read_id, 0);		\
-										\
-	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);	\
-										\
-	return sprintf(buf, "%d", cyp->port##num);				\
-}										\
-static DEVICE_ATTR(port##num, S_IWUGO | S_IRUGO, get_port##num, set_port##num);
-
-get_set_port(0, CY7C63_READ_PORT_ID0, CY7C63_WRITE_PORT_ID0);
-get_set_port(1, CY7C63_READ_PORT_ID1, CY7C63_WRITE_PORT_ID1);
-
-static int cy7c63_probe(struct usb_interface *interface,
-			const struct usb_device_id *id) {
-
-	struct cy7c63 *dev = NULL;
-	int retval = -ENOMEM;
-
-	/* allocate memory for our device state and initialize it */
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (dev == NULL) {
-		dev_err(&dev->udev->dev, "Out of memory!\n");
-		goto error;
-	}
-
-	dev->udev = usb_get_dev(interface_to_usbdev(interface));
-
-	/* save our data pointer in this interface device */
-	usb_set_intfdata(interface, dev);
-
-	/* create device attribute files */
-	device_create_file(&interface->dev, &dev_attr_port0);
-	device_create_file(&interface->dev, &dev_attr_port1);
-
-	/* let the user know what node this device is now attached to */
-	dev_info(&interface->dev,
-		"Cypress CY7C63xxx device now attached\n");
-
-	retval = 0;
-error:
-	return retval;
-}
-
-static void cy7c63_disconnect(struct usb_interface *interface) {
-
-	struct cy7c63 *dev;
-
-	dev = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
-
-	/* remove device attribute files */
-	device_remove_file(&interface->dev, &dev_attr_port0);
-	device_remove_file(&interface->dev, &dev_attr_port1);
-
-	usb_put_dev(dev->udev);
-
-	dev_info(&interface->dev,
-		"Cypress CY7C63xxx device now disconnected\n");
-
-	kfree(dev);
-}
-
-static struct usb_driver cy7c63_driver = {
-	.name = "cy7c63",
-	.probe = cy7c63_probe,
-	.disconnect = cy7c63_disconnect,
-	.id_table = cy7c63_table,
-};
-
-static int __init cy7c63_init(void) {
-
-	int result;
-
-	/* register this driver with the USB subsystem */
-	result = usb_register(&cy7c63_driver);
-	if (result) {
-		err("Function usb_register failed! Error number: %d\n", result);
-	}
-
-	return result;
-}
-
-static void __exit cy7c63_exit(void) {
-
-	/* deregister this driver with the USB subsystem */
-	usb_deregister(&cy7c63_driver);
-}
-
-module_init(cy7c63_init);
-module_exit(cy7c63_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
new file mode 100644
index 0000000..e091d32
--- /dev/null
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -0,0 +1,279 @@
+/*
+* cypress_cy7c63.c
+*
+* Copyright (c) 2006 Oliver Bock (o.bock@fh-wolfenbuettel.de)
+*
+*	This driver is based on the Cypress USB Driver by Marcus Maul
+*	(cyport) and the 2.0 version of Greg Kroah-Hartman's
+*	USB Skeleton driver.
+*
+*	This is a generic driver for the Cypress CY7C63xxx family.
+*	For the time being it enables you to read from and write to
+*	the single I/O ports of the device.
+*
+*	Supported vendors:	AK Modul-Bus Computer GmbH
+*	Supported devices:	CY7C63001A-PC (to be continued...)
+*	Supported functions:	Read/Write Ports (to be continued...)
+*
+*
+*	This program is free software; you can redistribute it and/or
+*	modify it under the terms of the GNU General Public License as
+*	published by the Free Software Foundation, version 2.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+
+#define DRIVER_AUTHOR		"Oliver Bock (o.bock@fh-wolfenbuettel.de)"
+#define DRIVER_DESC		"Cypress CY7C63xxx USB driver"
+
+#define CYPRESS_VENDOR_ID	0xa2c
+#define CYPRESS_PRODUCT_ID	0x8
+
+#define CYPRESS_READ_PORT	0x4
+#define CYPRESS_WRITE_PORT	0x5
+
+#define CYPRESS_READ_RAM	0x2
+#define CYPRESS_WRITE_RAM	0x3
+#define CYPRESS_READ_ROM	0x1
+
+#define CYPRESS_READ_PORT_ID0	0
+#define CYPRESS_WRITE_PORT_ID0	0
+#define CYPRESS_READ_PORT_ID1	0x2
+#define CYPRESS_WRITE_PORT_ID1	1
+
+#define CYPRESS_MAX_REQSIZE	8
+
+
+/* table of devices that work with this driver */
+static struct usb_device_id cypress_table [] = {
+	{ USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, cypress_table);
+
+/* structure to hold all of our device specific stuff */
+struct cypress {
+	struct usb_device *	udev;
+	unsigned char		port[2];
+};
+
+/* used to send usb control messages to device */
+static int vendor_command(struct cypress *dev, unsigned char request,
+			  unsigned char address, unsigned char data)
+{
+	int retval = 0;
+	unsigned int pipe;
+	unsigned char *iobuf;
+
+	/* allocate some memory for the i/o buffer*/
+	iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL);
+	if (!iobuf) {
+		dev_err(&dev->udev->dev, "Out of memory!\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
+
+	/* prepare usb control message and send it upstream */
+	pipe = usb_rcvctrlpipe(dev->udev, 0);
+	retval = usb_control_msg(dev->udev, pipe, request,
+				 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+				 address, data, iobuf, CYPRESS_MAX_REQSIZE,
+				 USB_CTRL_GET_TIMEOUT);
+
+	/* store returned data (more READs to be added) */
+	switch (request) {
+		case CYPRESS_READ_PORT:
+			if (address == CYPRESS_READ_PORT_ID0) {
+				dev->port[0] = iobuf[1];
+				dev_dbg(&dev->udev->dev,
+					"READ_PORT0 returned: %d\n",
+					dev->port[0]);
+			}
+			else if (address == CYPRESS_READ_PORT_ID1) {
+				dev->port[1] = iobuf[1];
+				dev_dbg(&dev->udev->dev,
+					"READ_PORT1 returned: %d\n",
+					dev->port[1]);
+			}
+			break;
+	}
+
+	kfree(iobuf);
+error:
+	return retval;
+}
+
+/* write port value */
+static ssize_t write_port(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count,
+			  int port_num, int write_id)
+{
+	int value = -1;
+	int result = 0;
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct cypress *cyp = usb_get_intfdata(intf);
+
+	dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num);
+
+	/* validate input data */
+	if (sscanf(buf, "%d", &value) < 1) {
+		result = -EINVAL;
+		goto error;
+	}
+	if (value < 0 || value > 255) {
+		result = -EINVAL;
+		goto error;
+	}
+
+	result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id,
+				(unsigned char)value);
+
+	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+error:
+	return result < 0 ? result : count;
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port0_handler(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0);
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port1_handler(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1);
+}
+
+/* read port value */
+static ssize_t read_port(struct device *dev, struct device_attribute *attr,
+			 char *buf, int port_num, int read_id)
+{
+	int result = 0;
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct cypress *cyp = usb_get_intfdata(intf);
+
+	dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num);
+
+	result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0);
+
+	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+
+	return sprintf(buf, "%d", cyp->port[port_num]);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port0_handler(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port1_handler(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
+}
+
+static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
+		   get_port0_handler, set_port0_handler);
+
+static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
+		   get_port1_handler, set_port1_handler);
+
+
+static int cypress_probe(struct usb_interface *interface,
+			 const struct usb_device_id *id)
+{
+	struct cypress *dev = NULL;
+	int retval = -ENOMEM;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		dev_err(&dev->udev->dev, "Out of memory!\n");
+		goto error;
+	}
+
+	dev->udev = usb_get_dev(interface_to_usbdev(interface));
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	/* create device attribute files */
+	device_create_file(&interface->dev, &dev_attr_port0);
+	device_create_file(&interface->dev, &dev_attr_port1);
+
+	/* let the user know that the device is now attached */
+	dev_info(&interface->dev,
+		 "Cypress CY7C63xxx device now attached\n");
+
+	retval = 0;
+error:
+	return retval;
+}
+
+static void cypress_disconnect(struct usb_interface *interface)
+{
+	struct cypress *dev;
+
+	dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	/* remove device attribute files */
+	device_remove_file(&interface->dev, &dev_attr_port0);
+	device_remove_file(&interface->dev, &dev_attr_port1);
+
+	usb_put_dev(dev->udev);
+
+	dev_info(&interface->dev,
+		 "Cypress CY7C63xxx device now disconnected\n");
+
+	kfree(dev);
+}
+
+static struct usb_driver cypress_driver = {
+	.name = "cypress_cy7c63",
+	.probe = cypress_probe,
+	.disconnect = cypress_disconnect,
+	.id_table = cypress_table,
+};
+
+static int __init cypress_init(void)
+{
+	int result;
+
+	/* register this driver with the USB subsystem */
+	result = usb_register(&cypress_driver);
+	if (result) {
+		err("Function usb_register failed! Error number: %d\n", result);
+	}
+
+	return result;
+}
+
+static void __exit cypress_exit(void)
+{
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&cypress_driver);
+}
+
+module_init(cypress_init);
+module_exit(cypress_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index c82c402..e095772 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -200,10 +200,8 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz
 
 	/* create a urb, and a buffer for it, and copy the data to the urb */
 	urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!urb) {
-		retval = -ENOMEM;
-		goto error;
-	}
+	if (!urb)
+		return -ENOMEM;
 	
 	buf = usb_buffer_alloc(dev->udev, count, GFP_KERNEL, &urb->transfer_dma);
 	if (!buf) {
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index e02c1a3..f961a77 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -64,7 +64,6 @@ struct mon_reader_text {
 };
 
 static void mon_text_ctor(void *, kmem_cache_t *, unsigned long);
-static void mon_text_dtor(void *, kmem_cache_t *, unsigned long);
 
 /*
  * mon_text_submit
@@ -268,7 +267,7 @@ static int mon_text_open(struct inode *inode, struct file *file)
 	    (long)rp);
 	rp->e_slab = kmem_cache_create(rp->slab_name,
 	    sizeof(struct mon_event_text), sizeof(long), 0,
-	    mon_text_ctor, mon_text_dtor);
+	    mon_text_ctor, NULL);
 	if (rp->e_slab == NULL) {
 		rc = -ENOMEM;
 		goto err_slab;
@@ -459,7 +458,3 @@ static void mon_text_ctor(void *mem, kmem_cache_t *slab, unsigned long sflags)
 	memset(mem, 0xe5, sizeof(struct mon_event_text));
 }
 
-static void mon_text_dtor(void *mem, kmem_cache_t *slab, unsigned long sflags)
-{
-	;
-}
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index 718f8e2..e5e6e4f 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -128,11 +128,13 @@
 #define	VENDOR_ID_MELCO			0x0411
 #define VENDOR_ID_MICRONET		0x3980
 #define	VENDOR_ID_LONGSHINE		0x07b8
+#define	VENDOR_ID_ZYXEL			0x0586
 
 #define PRODUCT_ID_RTL8150		0x8150
 #define	PRODUCT_ID_LUAKTX		0x0012
 #define	PRODUCT_ID_LCS8138TX		0x401a
 #define PRODUCT_ID_SP128AR		0x0003
+#define	PRODUCT_ID_PRESTIGE		0x401a
 
 #undef	EEPROM_WRITE
 
@@ -142,6 +144,7 @@ static struct usb_device_id rtl8150_table[] = {
 	{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
 	{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
 	{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+	{USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
 	{}
 };
 
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 8bd44fd..ac33bd4 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -456,6 +456,17 @@ config USB_SERIAL_SAFE_PADDED
 	bool "USB Secure Encapsulated Driver - Padded"
 	depends on USB_SERIAL_SAFE
 
+config USB_SERIAL_SIERRAWIRELESS
+	tristate "USB Sierra Wireless Driver"
+	depends on USB_SERIAL
+	help
+	  Say M here if you want to use a Sierra Wireless device (if
+	  using an PC 5220 or AC580 please use the Airprime driver
+	  instead).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sierra.
+
 config USB_SERIAL_TI
 	tristate "USB TI 3410/5052 Serial Driver"
 	depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 5a0960f..35d4acc 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_USB_SERIAL_OMNINET)		+= omninet.o
 obj-$(CONFIG_USB_SERIAL_OPTION)			+= option.o
 obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
 obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
+obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 94b9ba0..6208253 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c
index 343f6f2..01843ef 100644
--- a/drivers/usb/serial/anydata.c
+++ b/drivers/usb/serial/anydata.c
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x16d5, 0x6501) },	/* AirData CDMA device */
@@ -71,7 +71,7 @@ static int anydata_open(struct usb_serial_port *port, struct file *filp)
 				  	  port->bulk_in_endpointAddress),
 			  port->read_urb->transfer_buffer,
 			  port->read_urb->transfer_buffer_length,
-			  usb_serial_generic_write_bulk_callback, port);
+			  usb_serial_generic_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
 		dev_err(&port->dev,
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 8dec796..970d9ef 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -21,7 +21,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 
 static int debug;
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 3faa7aa..70ece9e 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -74,7 +74,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "belkin_sa.h"
 
 static int debug;
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index f2d993b..6542f22 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int usb_serial_device_match (struct device *dev, struct device_driver *drv)
 {
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 3d456b3..3a9073d 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -17,11 +17,10 @@
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 static int debug;
 
-#include "usb-serial.h"
-
 struct usbcons_info {
 	int			magic;
 	int			break_flag;
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index df0a4f9..486c741 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -26,7 +26,7 @@
 #include <linux/moduleparam.h>
 #include <linux/usb.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 49b51ab..6286aba 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -39,7 +39,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 #define CYBERJACK_LOCAL_BUF_SIZE 32
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 4ff2dfb..ee70fdd 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -59,11 +59,11 @@
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <linux/serial.h>
 #include <linux/delay.h>
 #include <asm/uaccess.h>
 
-#include "usb-serial.h"
 #include "cypress_m8.h"
 
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 6953d3e..9b22518 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -246,7 +246,7 @@
 #include <asm/uaccess.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* Defines */
 
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 1e2b31e..daafe40 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -62,7 +62,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c
index debc3b0..5169c2d 100644
--- a/drivers/usb/serial/ezusb.c
+++ b/drivers/usb/serial/ezusb.c
@@ -15,7 +15,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */
 #define CPUCS_REG    0x7F92
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8a74b19..b458aed 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -257,7 +257,7 @@
 #include <asm/uaccess.h>
 #include <linux/usb.h>
 #include <linux/serial.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "ftdi_sio.h"
 
 /*
@@ -313,6 +313,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
@@ -500,6 +501,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
+	{ USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -548,11 +551,17 @@ struct ftdi_private {
 	spinlock_t rx_lock;	/* spinlock for receive state */
 	struct work_struct rx_work;
 	int rx_processed;
+	unsigned long rx_bytes;
 
 	__u16 interface;	/* FT2232C port interface (0 for FT232/245) */
 
 	int force_baud;		/* if non-zero, force the baud rate to this value */
 	int force_rtscts;	/* if non-zero, force RTS-CTS to always be enabled */
+
+	spinlock_t tx_lock;	/* spinlock for transmit state */
+	unsigned long tx_bytes;
+	unsigned long tx_outstanding_bytes;
+	unsigned long tx_outstanding_urbs;
 };
 
 /* Used for TIOCMIWAIT */
@@ -626,6 +635,9 @@ static struct usb_serial_driver ftdi_sio_device = {
 #define HIGH 1
 #define LOW 0
 
+/* number of outstanding urbs to prevent userspace DoS from happening */
+#define URB_UPPER_LIMIT	42
+
 /*
  * ***************************************************************************
  * Utlity functions
@@ -1156,6 +1168,7 @@ static int ftdi_sio_attach (struct usb_serial *serial)
 	}
 
 	spin_lock_init(&priv->rx_lock);
+	spin_lock_init(&priv->tx_lock);
         init_waitqueue_head(&priv->delta_msr_wait);
 	/* This will push the characters through immediately rather
 	   than queue a task to deliver them */
@@ -1270,6 +1283,13 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
 
 	dbg("%s", __FUNCTION__);
 
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	priv->tx_bytes = 0;
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	spin_lock_irqsave(&priv->rx_lock, flags);
+	priv->rx_bytes = 0;
+	spin_unlock_irqrestore(&priv->rx_lock, flags);
+
 	if (port->tty)
 		port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
@@ -1372,6 +1392,7 @@ static int ftdi_write (struct usb_serial_port *port,
 	int data_offset ;       /* will be 1 for the SIO and 0 otherwise */
 	int status;
 	int transfer_size;
+	unsigned long flags;
 
 	dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count);
 
@@ -1379,6 +1400,13 @@ static int ftdi_write (struct usb_serial_port *port,
 		dbg("write request of 0 bytes");
 		return 0;
 	}
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
+		dbg("%s - write limit hit\n", __FUNCTION__);
+		return 0;
+	}
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
 	
 	data_offset = priv->write_offset;
         dbg("data_offset set to %d",data_offset);
@@ -1445,6 +1473,12 @@ static int ftdi_write (struct usb_serial_port *port,
 		err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
 		count = status;
 		kfree (buffer);
+	} else {
+		spin_lock_irqsave(&priv->tx_lock, flags);
+		++priv->tx_outstanding_urbs;
+		priv->tx_outstanding_bytes += count;
+		priv->tx_bytes += count;
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
 	}
 
 	/* we are done with this urb, so let the host driver
@@ -1460,7 +1494,11 @@ static int ftdi_write (struct usb_serial_port *port,
 
 static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 {
+	unsigned long flags;
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+	struct ftdi_private *priv;
+	int data_offset;       /* will be 1 for the SIO and 0 otherwise */
+	unsigned long countback;
 
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
 	kfree (urb->transfer_buffer);
@@ -1472,34 +1510,67 @@ static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 		return;
 	}
 
+	priv = usb_get_serial_port_data(port);
+	if (!priv) {
+		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+		return;
+	}
+	/* account for transferred data */
+	countback = urb->actual_length;
+	data_offset = priv->write_offset;
+	if (data_offset > 0) {
+		/* Subtract the control bytes */
+		countback -= (data_offset * ((countback + (PKTSZ - 1)) / PKTSZ));
+	}
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	--priv->tx_outstanding_urbs;
+	priv->tx_outstanding_bytes -= countback;
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+
 	usb_serial_port_softint(port);
 } /* ftdi_write_bulk_callback */
 
 
 static int ftdi_write_room( struct usb_serial_port *port )
 {
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int room;
+	unsigned long flags;
+
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	/*
-	 * We really can take anything the user throws at us
-	 * but let's pick a nice big number to tell the tty
-	 * layer that we have lots of free space
-	 */
-	return 2048;
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
+		/*
+		 * We really can take anything the user throws at us
+		 * but let's pick a nice big number to tell the tty
+		 * layer that we have lots of free space
+		 */
+		room = 2048;
+	} else {
+		room = 0;
+	}
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	return room;
 } /* ftdi_write_room */
 
 
 static int ftdi_chars_in_buffer (struct usb_serial_port *port)
 { /* ftdi_chars_in_buffer */
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int buffered;
+	unsigned long flags;
+
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	/* 
-	 * We can't really account for how much data we
-	 * have sent out, but hasn't made it through to the
-	 * device, so just tell the tty layer that everything
-	 * is flushed.
-	 */
-	return 0;
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	buffered = (int)priv->tx_outstanding_bytes;
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	if (buffered < 0) {
+		err("%s outstanding tx bytes is negative!", __FUNCTION__);
+		buffered = 0;
+	}
+	return buffered;
 } /* ftdi_chars_in_buffer */
 
 
@@ -1509,6 +1580,8 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
 	struct tty_struct *tty;
 	struct ftdi_private *priv;
+	unsigned long countread;
+	unsigned long flags;
 
 	if (urb->number_of_packets > 0) {
 		err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
@@ -1543,6 +1616,13 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 		return;
 	}
 
+	/* count data bytes, but not status bytes */
+	countread = urb->actual_length;
+	countread -= 2 * ((countread + (PKTSZ - 1)) / PKTSZ);
+	spin_lock_irqsave(&priv->rx_lock, flags);
+	priv->rx_bytes += countread;
+	spin_unlock_irqrestore(&priv->rx_lock, flags);
+
 	ftdi_process_read(port);
 
 } /* ftdi_read_bulk_callback */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 6ab2ac8..04ef90f 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -36,6 +36,9 @@
 #define FTDI_ACTZWAVE_PID	0xF2D0
 
 
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID	0xCAA0	/* Product Id */
+
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
 
@@ -442,6 +445,18 @@
  */
 #define FTDI_YEI_SERVOCENTER31_PID	0xE050	/* YEI ServoCenter3.1 USB */
 
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID		0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID			0x128D
+#define TESTO_USB_INTERFACE_PID		0x0001
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index 803721b..77b9772 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1404, 0xcddc) },
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 1f5d162..7278526 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -35,6 +35,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 /* the mode to be set when the port ist opened */
 static int initial_mode = 1;
@@ -42,8 +43,6 @@ static int initial_mode = 1;
 /* debug flag */
 static int debug = 0;
 
-#include "usb-serial.h"
-
 #define GARMIN_VENDOR_ID             0x091E
 
 /*
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 945b8bb..1727135 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -17,8 +17,8 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
 
 static int debug;
 
@@ -285,6 +285,7 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *reg
 	if (result)
 		dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
 
 void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 {
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 7e06358..ebcac70 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -17,7 +17,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index bd2c05d..c49976c 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -44,7 +44,7 @@
 #include <linux/wait.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "io_edgeport.h"
 #include "io_ionsp.h"		/* info for the iosp messages */
 #include "io_16654.h"		/* 16654 UART defines */
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 723a12a..17c5b1d 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -39,8 +39,8 @@
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
-#include "usb-serial.h"
 #include "io_16654.h"
 #include "io_usbvend.h"
 #include "io_ti.h"
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index dbcfe17..59c5d99 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -55,7 +55,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "ipaq.h"
 
 #define KP_RETRIES	100
@@ -70,6 +70,8 @@
 
 static __u16 product, vendor;
 static int debug;
+static int connect_retries = KP_RETRIES;
+static int initial_wait;
 
 /* Function prototypes for an ipaq */
 static int  ipaq_open (struct usb_serial_port *port, struct file *filp);
@@ -582,7 +584,7 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
 	struct ipaq_private	*priv;
 	struct ipaq_packet	*pkt;
 	int			i, result = 0;
-	int			retries = KP_RETRIES;
+	int			retries = connect_retries;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
@@ -646,16 +648,12 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
 	port->read_urb->transfer_buffer_length = URBDATA_SIZE;
 	port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE;
 	
+	msleep(1000*initial_wait);
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, serial->dev, 
 		      usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
 		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
 		      ipaq_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result) {
-		err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
-		goto error;
-	}
 
 	/*
 	 * Send out control message observed in win98 sniffs. Not sure what
@@ -670,8 +668,14 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
 				usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
 				0x1, 0, NULL, 0, 100);
 		if (result == 0) {
+			result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+			if (result) {
+				err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+				goto error;
+			}
 			return 0;
 		}
+		msleep(1000);
 	}
 	err("%s - failed doing control urb, error %d", __FUNCTION__, result);
 	goto error;
@@ -854,6 +858,7 @@ static void ipaq_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
 	
 	if (urb->status) {
 		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+		return;
 	}
 
 	spin_lock_irqsave(&write_list_lock, flags);
@@ -966,3 +971,9 @@ MODULE_PARM_DESC(vendor, "User specified USB idVendor");
 
 module_param(product, ushort, 0);
 MODULE_PARM_DESC(product, "User specified USB idProduct");
+
+module_param(connect_retries, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)");
+
+module_param(initial_wait, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(initial_wait, "Time to wait before attempting a connection (in seconds)");
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index a4a0bfe..87306cb 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -46,8 +46,8 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
 
 /*
  * Version Information
@@ -373,6 +373,8 @@ static void ipw_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
 
 	dbg("%s", __FUNCTION__);
 
+	port->write_urb_busy = 0;
+
 	if (urb->status)
 		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
 
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 2cf1fed..1738b0b 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -57,7 +57,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index d7c58f1..015ad6c 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -107,7 +107,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "keyspan.h"
 
 static int debug;
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 03ab3c0f..49b8dc0 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -78,6 +78,7 @@
 #include <linux/workqueue.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 static int debug;
 
@@ -107,8 +108,6 @@ struct ezusb_hex_record {
 #include "xircom_pgs_fw.h"
 #endif
 
-#include "usb-serial.h"
-
 /*
  * Version Information
  */
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index b45ff3e..2a2f3e2d 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -55,7 +55,7 @@
 #include <linux/module.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "kl5kusb105.h"
 
 static int debug;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 4577333..d50dce0 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -46,8 +46,8 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <linux/ioctl.h>
-#include "usb-serial.h"
 #include "kobil_sct.h"
 
 static int debug;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index ca05d32..f4d4305 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -75,7 +75,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "mct_u232.h"
 
 /*
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 7f54408..ac3f8b5 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -14,7 +14,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index cfb711a..e49f409 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -46,7 +46,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 78ad4b3..f0530c1 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -35,6 +35,7 @@
   2006-06-01  v0.6.2 add backwards-compatibility stuff
   2006-06-01  v0.6.3 add Novatel Wireless
   2006-06-01  v0.7   Option => GSM
+  2006-06-01  v0.7.1 add COBRA2
 
   Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
 
@@ -53,7 +54,7 @@
   device features.
 */
 
-#define DRIVER_VERSION "v0.7.0"
+#define DRIVER_VERSION "v0.7.1"
 #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
 #define DRIVER_DESC "USB Driver for GSM modems"
 
@@ -64,7 +65,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* Function prototypes */
 static int  option_open(struct usb_serial_port *port, struct file *filp);
@@ -102,6 +103,7 @@ static int  option_send_setup(struct usb_serial_port *port);
 #define OPTION_PRODUCT_FUSION           0x6000
 #define OPTION_PRODUCT_FUSION2          0x6300
 #define OPTION_PRODUCT_COBRA            0x6500
+#define OPTION_PRODUCT_COBRA2           0x6600
 #define HUAWEI_PRODUCT_E600             0x1001
 #define AUDIOVOX_PRODUCT_AIRCARD        0x0112
 #define SIERRAWIRELESS_PRODUCT_MC8755   0x6802
@@ -112,6 +114,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
 	{ USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
@@ -124,6 +127,7 @@ static struct usb_device_id option_ids1[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index de93a2b..259db31 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -27,7 +27,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "pl2303.h"
 
 /*
@@ -52,6 +52,7 @@ struct pl2303_buf {
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
@@ -79,6 +80,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
 	{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
 	{ USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) },
+	{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 7f29e81..d9c1e6e 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -10,6 +10,7 @@
 #define PL2303_VENDOR_ID	0x067b
 #define PL2303_PRODUCT_ID	0x2303
 #define PL2303_PRODUCT_ID_RSAQ2		0x04bb
+#define PL2303_PRODUCT_ID_DCU11		0x1234
 #define PL2303_PRODUCT_ID_PHAROS	0xaaa0
 #define PL2303_PRODUCT_ID_RSAQ3		0xaaa2
 
@@ -84,3 +85,7 @@
 /* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */
 #define OTI_VENDOR_ID	0x0ea0
 #define OTI_PRODUCT_ID	0x6858
+
+/* DATAPILOT Universal-2 Phone Cable */
+#define DATAPILOT_U2_VENDOR_ID	0x0731
+#define DATAPILOT_U2_PRODUCT_ID	0x2003
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 897d844..789771e 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -71,7 +71,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 
 #ifndef CONFIG_USB_SAFE_PADDED
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
new file mode 100644
index 0000000..d29638d
--- /dev/null
+++ b/drivers/usb/serial/sierra.c
@@ -0,0 +1,75 @@
+/*
+ * Sierra Wireless CDMA Wireless Serial USB driver
+ *
+ * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com>
+ * Original Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
+	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
+	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
+	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
+	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
+	{ USB_DEVICE(0x1199, 0x6803) },	/* Sierra Wireless MC8765 */
+	{ USB_DEVICE(0x1199, 0x6812) },	/* Sierra Wireless MC8775 */
+	{ USB_DEVICE(0x1199, 0x6820) },	/* Sierra Wireless AirCard 875 */
+	/* Following devices are supported in the airprime.c driver */
+	/* { USB_DEVICE(0x1199, 0x0112) }, */	/* Sierra Wireless AirCard 580 */
+	/* { USB_DEVICE(0x0F3D, 0x0112) }, */	/* AirPrime/Sierra PC 5220 */
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver sierra_driver = {
+	.name =		"sierra_wireless",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+};
+
+static struct usb_serial_driver sierra_device = {
+	.driver = {
+	.owner =		THIS_MODULE,
+	.name =			"Sierra_Wireless",
+	},
+	.id_table =		id_table,
+	.num_interrupt_in =	NUM_DONT_CARE,
+	.num_bulk_in =		NUM_DONT_CARE,
+	.num_bulk_out =		NUM_DONT_CARE,
+	.num_ports =		3,
+};
+
+static int __init sierra_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&sierra_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&sierra_driver);
+	if (retval)
+		usb_serial_deregister(&sierra_device);
+	return retval;
+}
+
+static void __exit sierra_exit(void)
+{
+	usb_deregister(&sierra_driver);
+	usb_serial_deregister(&sierra_device);
+}
+
+module_init(sierra_init);
+module_exit(sierra_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a9afff3..ac9b8ee 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -83,8 +83,8 @@
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
-#include "usb-serial.h"
 #include "ti_usb_3410_5052.h"
 #include "ti_fw_3410.h"		/* firmware image for 3410 */
 #include "ti_fw_5052.h"		/* firmware image for 5052 */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index b59a053..12c1694 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -31,7 +31,7 @@
 #include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "pl2303.h"
 
 /*
@@ -40,6 +40,8 @@
 #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
 #define DRIVER_DESC "USB Serial Driver core"
 
+static void port_free(struct usb_serial_port *port);
+
 /* Driver structure we register with the USB core */
 static struct usb_driver usb_serial_driver = {
 	.name =		"usbserial",
@@ -146,23 +148,10 @@ static void destroy_serial(struct kref *kref)
 			port = serial->port[i];
 			if (!port)
 				continue;
-			usb_kill_urb(port->read_urb);
-			usb_free_urb(port->read_urb);
-			usb_kill_urb(port->write_urb);
-			usb_free_urb(port->write_urb);
-			usb_kill_urb(port->interrupt_in_urb);
-			usb_free_urb(port->interrupt_in_urb);
-			usb_kill_urb(port->interrupt_out_urb);
-			usb_free_urb(port->interrupt_out_urb);
-			kfree(port->bulk_in_buffer);
-			kfree(port->bulk_out_buffer);
-			kfree(port->interrupt_in_buffer);
-			kfree(port->interrupt_out_buffer);
+			port_free(port);
 		}
 	}
 
-	flush_scheduled_work();		/* port->work */
-
 	usb_put_dev(serial->dev);
 
 	/* free up any memory that we allocated */
@@ -564,6 +553,11 @@ static void port_release(struct device *dev)
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 
 	dbg ("%s - %s", __FUNCTION__, dev->bus_id);
+	port_free(port);
+}
+
+static void port_free(struct usb_serial_port *port)
+{
 	usb_kill_urb(port->read_urb);
 	usb_free_urb(port->read_urb);
 	usb_kill_urb(port->write_urb);
@@ -576,6 +570,7 @@ static void port_release(struct device *dev)
 	kfree(port->bulk_out_buffer);
 	kfree(port->interrupt_in_buffer);
 	kfree(port->interrupt_out_buffer);
+	flush_scheduled_work();		/* port->work */
 	kfree(port);
 }
 
diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h
deleted file mode 100644
index 0f2802a..0000000
--- a/drivers/usb/serial/usb-serial.h
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * USB Serial Converter driver
- *
- *	Copyright (C) 1999 - 2005
- *	    Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License.
- *
- */
-
-
-#ifndef __LINUX_USB_SERIAL_H
-#define __LINUX_USB_SERIAL_H
-
-#include <linux/kref.h>
-#include <linux/mutex.h>
-
-#define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
-#define SERIAL_TTY_MINORS	255	/* loads of devices :) */
-
-#define MAX_NUM_PORTS		8	/* The maximum number of ports one device can grab at once */
-
-/* parity check flag */
-#define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-/**
- * usb_serial_port: structure for the specific ports of a device.
- * @serial: pointer back to the struct usb_serial owner of this port.
- * @tty: pointer to the corresponding tty for this port.
- * @lock: spinlock to grab when updating portions of this structure.
- * @mutex: mutex used to synchronize serial_open() and serial_close()
- *	access for this port.
- * @number: the number of the port (the minor number).
- * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
- * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
- * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
- *	for this port.
- * @interrupt_out_buffer: pointer to the interrupt out buffer for this port.
- * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes.
- * @interrupt_out_urb: pointer to the interrupt out struct urb for this port.
- * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
- * 	for this port.
- * @bulk_in_buffer: pointer to the bulk in buffer for this port.
- * @read_urb: pointer to the bulk in struct urb for this port.
- * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
- *	port.
- * @bulk_out_buffer: pointer to the bulk out buffer for this port.
- * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
- * @write_urb: pointer to the bulk out struct urb for this port.
- * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
- *	port.
- * @write_wait: a wait_queue_head_t used by the port.
- * @work: work queue entry for the line discipline waking up.
- * @open_count: number of times this port has been opened.
- *
- * This structure is used by the usb-serial core and drivers for the specific
- * ports of a device.
- */
-struct usb_serial_port {
-	struct usb_serial *	serial;
-	struct tty_struct *	tty;
-	spinlock_t		lock;
-	struct mutex            mutex;
-	unsigned char		number;
-
-	unsigned char *		interrupt_in_buffer;
-	struct urb *		interrupt_in_urb;
-	__u8			interrupt_in_endpointAddress;
-
-	unsigned char *		interrupt_out_buffer;
-	int			interrupt_out_size;
-	struct urb *		interrupt_out_urb;
-	__u8			interrupt_out_endpointAddress;
-
-	unsigned char *		bulk_in_buffer;
-	int			bulk_in_size;
-	struct urb *		read_urb;
-	__u8			bulk_in_endpointAddress;
-
-	unsigned char *		bulk_out_buffer;
-	int			bulk_out_size;
-	struct urb *		write_urb;
-	int			write_urb_busy;
-	__u8			bulk_out_endpointAddress;
-
-	wait_queue_head_t	write_wait;
-	struct work_struct	work;
-	int			open_count;
-	struct device		dev;
-};
-#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
-
-/* get and set the port private data pointer helper functions */
-static inline void *usb_get_serial_port_data (struct usb_serial_port *port)
-{
-	return dev_get_drvdata(&port->dev);
-}
-
-static inline void usb_set_serial_port_data (struct usb_serial_port *port, void *data)
-{
-	dev_set_drvdata(&port->dev, data);
-}
-
-/**
- * usb_serial - structure used by the usb-serial core for a device
- * @dev: pointer to the struct usb_device for this device
- * @type: pointer to the struct usb_serial_driver for this device
- * @interface: pointer to the struct usb_interface for this device
- * @minor: the starting minor number for this device
- * @num_ports: the number of ports this device has
- * @num_interrupt_in: number of interrupt in endpoints we have
- * @num_interrupt_out: number of interrupt out endpoints we have
- * @num_bulk_in: number of bulk in endpoints we have
- * @num_bulk_out: number of bulk out endpoints we have
- * @port: array of struct usb_serial_port structures for the different ports.
- * @private: place to put any driver specific information that is needed.  The
- *	usb-serial driver is required to manage this data, the usb-serial core
- *	will not touch this.  Use usb_get_serial_data() and
- *	usb_set_serial_data() to access this.
- */
-struct usb_serial {
-	struct usb_device *		dev;
-	struct usb_serial_driver *	type;
-	struct usb_interface *		interface;
-	unsigned char			minor;
-	unsigned char			num_ports;
-	unsigned char			num_port_pointers;
-	char				num_interrupt_in;
-	char				num_interrupt_out;
-	char				num_bulk_in;
-	char				num_bulk_out;
-	struct usb_serial_port *	port[MAX_NUM_PORTS];
-	struct kref			kref;
-	void *				private;
-};
-#define to_usb_serial(d) container_of(d, struct usb_serial, kref)
-
-#define NUM_DONT_CARE	(-1)
-
-/* get and set the serial private data pointer helper functions */
-static inline void *usb_get_serial_data (struct usb_serial *serial)
-{
-	return serial->private;
-}
-
-static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
-{
-	serial->private = data;
-}
-
-/**
- * usb_serial_driver - describes a usb serial driver
- * @description: pointer to a string that describes this driver.  This string used
- *	in the syslog messages when a device is inserted or removed.
- * @id_table: pointer to a list of usb_device_id structures that define all
- *	of the devices this structure can support.
- * @num_interrupt_in: the number of interrupt in endpoints this device will
- *	have.
- * @num_interrupt_out: the number of interrupt out endpoints this device will
- *	have.
- * @num_bulk_in: the number of bulk in endpoints this device will have.
- * @num_bulk_out: the number of bulk out endpoints this device will have.
- * @num_ports: the number of different ports this device will have.
- * @calc_num_ports: pointer to a function to determine how many ports this
- *	device has dynamically.  It will be called after the probe()
- *	callback is called, but before attach()
- * @probe: pointer to the driver's probe function.
- *	This will be called when the device is inserted into the system,
- *	but before the device has been fully initialized by the usb_serial
- *	subsystem.  Use this function to download any firmware to the device,
- *	or any other early initialization that might be needed.
- *	Return 0 to continue on with the initialization sequence.  Anything 
- *	else will abort it.
- * @attach: pointer to the driver's attach function.
- *	This will be called when the struct usb_serial structure is fully set
- *	set up.  Do any local initialization of the device, or any private
- *	memory structure allocation at this point in time.
- * @shutdown: pointer to the driver's shutdown function.  This will be
- *	called when the device is removed from the system.
- *
- * This structure is defines a USB Serial driver.  It provides all of
- * the information that the USB serial core code needs.  If the function
- * pointers are defined, then the USB serial core code will call them when
- * the corresponding tty port functions are called.  If they are not
- * called, the generic serial function will be used instead.
- *
- * The driver.owner field should be set to the module owner of this driver.
- * The driver.name field should be set to the name of this driver (remember
- * it will show up in sysfs, so it needs to be short and to the point.
- * Useing the module name is a good idea.)
- */
-struct usb_serial_driver {
-	const char *description;
-	const struct usb_device_id *id_table;
-	char	num_interrupt_in;
-	char	num_interrupt_out;
-	char	num_bulk_in;
-	char	num_bulk_out;
-	char	num_ports;
-
-	struct list_head	driver_list;
-	struct device_driver	driver;
-
-	int (*probe) (struct usb_serial *serial, const struct usb_device_id *id);
-	int (*attach) (struct usb_serial *serial);
-	int (*calc_num_ports) (struct usb_serial *serial);
-
-	void (*shutdown) (struct usb_serial *serial);
-
-	int (*port_probe) (struct usb_serial_port *port);
-	int (*port_remove) (struct usb_serial_port *port);
-
-	/* serial function calls */
-	int  (*open)		(struct usb_serial_port *port, struct file * filp);
-	void (*close)		(struct usb_serial_port *port, struct file * filp);
-	int  (*write)		(struct usb_serial_port *port, const unsigned char *buf, int count);
-	int  (*write_room)	(struct usb_serial_port *port);
-	int  (*ioctl)		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-	void (*set_termios)	(struct usb_serial_port *port, struct termios * old);
-	void (*break_ctl)	(struct usb_serial_port *port, int break_state);
-	int  (*chars_in_buffer)	(struct usb_serial_port *port);
-	void (*throttle)	(struct usb_serial_port *port);
-	void (*unthrottle)	(struct usb_serial_port *port);
-	int  (*tiocmget)	(struct usb_serial_port *port, struct file *file);
-	int  (*tiocmset)	(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
-
-	void (*read_int_callback)(struct urb *urb, struct pt_regs *regs);
-	void (*write_int_callback)(struct urb *urb, struct pt_regs *regs);
-	void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs);
-	void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs);
-};
-#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver)
-
-extern int  usb_serial_register(struct usb_serial_driver *driver);
-extern void usb_serial_deregister(struct usb_serial_driver *driver);
-extern void usb_serial_port_softint(struct usb_serial_port *port);
-
-extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id);
-extern void usb_serial_disconnect(struct usb_interface *iface);
-
-extern int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest);
-extern int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit);
-
-/* USB Serial console functions */
-#ifdef CONFIG_USB_SERIAL_CONSOLE
-extern void usb_serial_console_init (int debug, int minor);
-extern void usb_serial_console_exit (void);
-extern void usb_serial_console_disconnect(struct usb_serial *serial);
-#else
-static inline void usb_serial_console_init (int debug, int minor) { }
-static inline void usb_serial_console_exit (void) { }
-static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
-#endif
-
-/* Functions needed by other parts of the usbserial core */
-extern struct usb_serial *usb_serial_get_by_index (unsigned int minor);
-extern void usb_serial_put(struct usb_serial *serial);
-extern int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp);
-extern int usb_serial_generic_write (struct usb_serial_port *port, const unsigned char *buf, int count);
-extern void usb_serial_generic_close (struct usb_serial_port *port, struct file *filp);
-extern int usb_serial_generic_write_room (struct usb_serial_port *port);
-extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port);
-extern void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
-extern void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
-extern void usb_serial_generic_shutdown (struct usb_serial *serial);
-extern int usb_serial_generic_register (int debug);
-extern void usb_serial_generic_deregister (void);
-
-extern int usb_serial_bus_register (struct usb_serial_driver *device);
-extern void usb_serial_bus_deregister (struct usb_serial_driver *device);
-
-extern struct usb_serial_driver usb_serial_generic_device;
-extern struct bus_type usb_serial_bus_type;
-extern struct tty_driver *usb_serial_tty_driver;
-
-static inline void usb_serial_debug_data(int debug,
-					 struct device *dev,
-					 const char *function, int size,
-					 const unsigned char *data)
-{
-	int i;
-
-	if (debug) {
-		dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", function, size);
-		for (i = 0; i < size; ++i)
-			printk ("%.2x ", data[i]);
-		printk ("\n");
-	}
-}
-
-/* Use our own dbg macro */
-#undef dbg
-#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg); } while (0)
-
-
-
-#endif	/* ifdef __LINUX_USB_SERIAL_H */
-
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 95a2936..88949f7 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -25,7 +25,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "visor.h"
 
 /*
@@ -302,7 +302,6 @@ static int visor_open (struct usb_serial_port *port, struct file *filp)
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->bytes_in = 0;
 	priv->bytes_out = 0;
-	priv->outstanding_urbs = 0;
 	priv->throttled = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
@@ -435,13 +434,25 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf,
 
 static int visor_write_room (struct usb_serial_port *port)
 {
+	struct visor_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
 	/*
 	 * We really can take anything the user throws at us
 	 * but let's pick a nice big number to tell the tty
-	 * layer that we have lots of free space
+	 * layer that we have lots of free space, unless we don't.
 	 */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dbg("%s - write limit hit\n", __FUNCTION__);
+		return 0;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	return 2048;
 }
 
@@ -758,15 +769,22 @@ static int visor_calc_num_ports (struct usb_serial *serial)
 
 static int generic_startup(struct usb_serial *serial)
 {
+	struct usb_serial_port **ports = serial->port;
 	struct visor_private *priv;
 	int i;
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		priv = kzalloc (sizeof(*priv), GFP_KERNEL);
-		if (!priv)
+		if (!priv) {
+			while (i-- != 0) {
+				priv = usb_get_serial_port_data(ports[i]);
+				usb_set_serial_port_data(ports[i], NULL);
+				kfree(priv);
+			}
 			return -ENOMEM;
+		}
 		spin_lock_init(&priv->lock);
-		usb_set_serial_port_data(serial->port[i], priv);
+		usb_set_serial_port_data(ports[i], priv);
 	}
 	return 0;
 }
@@ -876,7 +894,18 @@ static int clie_5_attach (struct usb_serial *serial)
 
 static void visor_shutdown (struct usb_serial *serial)
 {
+	struct visor_private *priv;
+	int i;
+
 	dbg("%s", __FUNCTION__);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		priv = usb_get_serial_port_data(serial->port[i]);
+		if (priv) {
+			usb_set_serial_port_data(serial->port[i], NULL);
+			kfree(priv);
+		}
+	}
 }
 
 static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 540438c..6e6c793 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -79,7 +79,7 @@
 #include <linux/usb.h>
 #include <linux/serial_reg.h>
 #include <linux/serial.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "whiteheat_fw.h"		/* firmware for the ConnectTech WhiteHEAT device */
 #include "whiteheat.h"			/* WhiteHEAT specific commands */
 
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 5715291..a4b7df9 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -112,13 +112,11 @@ static int slave_configure(struct scsi_device *sdev)
 	if (sdev->scsi_level < SCSI_2)
 		sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
 
-	/* According to the technical support people at Genesys Logic,
-	 * devices using their chips have problems transferring more than
-	 * 32 KB at a time.  In practice people have found that 64 KB
-	 * works okay and that's what Windows does.  But we'll be
-	 * conservative; people can always use the sysfs interface to
-	 * increase max_sectors. */
-	if (le16_to_cpu(us->pusb_dev->descriptor.idVendor) == USB_VENDOR_ID_GENESYS &&
+	/* Many devices have trouble transfering more than 32KB at a time,
+	 * while others have trouble with more than 64K. At this time we
+	 * are limiting both to 32K (64 sectores).
+	 */
+	if ((us->flags & US_FL_MAX_SECTORS_64) &&
 			sdev->request_queue->max_sectors > 64)
 		blk_queue_max_sectors(sdev->request_queue, 64);
 
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index eb7188b..d6acc92 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -180,7 +180,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 	if (timeleft <= 0) {
 		US_DEBUGP("%s -- cancelling URB\n",
 			  timeleft == 0 ? "Timeout" : "Signal");
-		usb_unlink_urb(us->current_urb);
+		usb_kill_urb(us->current_urb);
 	}
 
 	/* return the URB status */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c7e84e6..a5ca449 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -112,6 +112,19 @@ UNUSUAL_DEV(  0x0411, 0x001c, 0x0113, 0x0113,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
+/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
+UNUSUAL_DEV(  0x0419, 0x0100, 0x0100, 0x0100,
+                "Samsung Info. Systems America, Inc.",
+                "MP3 Player",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Orgad Shaneh <orgads@gmail.com> */
+UNUSUAL_DEV(  0x0419, 0xaace, 0x0100, 0x0100,
+		"Samsung", "MP3 Player",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Christian Leber <christian@leber.de> */
 UNUSUAL_DEV(  0x0419, 0xaaf5, 0x0100, 0x0100,
 		"TrekStor",
@@ -132,6 +145,14 @@ UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
+ * Einar Th. Einarsson <einarthered@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
+		"Nokia",
+		"N91",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
 /* Reported by Jiri Slaby <jirislaby@gmail.com> and
  * Rene C. Castberg <Rene@Castberg.org> */
 UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
@@ -140,6 +161,13 @@ UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
+/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
+UNUSUAL_DEV(  0x0421, 0x044e, 0x0100, 0x0100,
+		"Nokia",
+		"E61",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		"SMSC",
@@ -473,10 +501,11 @@ UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
 		US_SC_SCSI, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
 
-/* This entry is needed because the device reports Sub=ff */
-UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0600,
+/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
+ * This entry is needed because the device reports Sub=ff */
+UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
 		"Sony",
-		"DSC-T1/T5",
+		"DSC-T1/T5/H5",
 		US_SC_8070, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
@@ -708,18 +737,22 @@ UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
  * They were originally reported by Alexander Oltu
  * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
  * respectively.
+ *
+ * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
+ * <phil@ipom.com> as these flags were made and hard-coded
+ * special-cases were pulled from scsiglue.c.
  */
 UNUSUAL_DEV(  0x05e3, 0x0701, 0x0000, 0xffff,
 		"Genesys Logic",
 		"USB to IDE Optical",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_GO_SLOW ),
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
 
 UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
 		"Genesys Logic",
 		"USB to IDE Disk",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_GO_SLOW ),
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
 
 /* Reported by Hanno Boeck <hanno@gmx.de>
  * Taken from the Lycoris Kernel */
@@ -1196,6 +1229,14 @@ UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Benjamin Schiller <sbenni@gmx.de>
+ * It is also sold by Easylite as DJ 20 */
+UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
+		"Typhoon",
+		"My DJ 1820",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
+
 /* Reported by Michael Stattmann <michael@stattmann.com> */
 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
 		"Sony Ericsson",
@@ -1227,6 +1268,15 @@ UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x0110,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
+ * and Renato Perini <rperini@email.it>
+ */
+UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
+		"Motorola",
+		"RAZR V3x",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
 UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
 		"MPIO",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 1185aca..5ee19be 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -55,6 +55,7 @@
 #include <linux/slab.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
+#include <linux/utsrelease.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -373,8 +374,12 @@ static int usb_stor_control_thread(void * __us)
 		/* lock access to the state */
 		scsi_lock(host);
 
+		/* did the command already complete because of a disconnect? */
+		if (!us->srb)
+			;		/* nothing to do */
+
 		/* indicate that the command is done */
-		if (us->srb->result != DID_ABORT << 16) {
+		else if (us->srb->result != DID_ABORT << 16) {
 			US_DEBUGP("scsi cmd done, result=0x%x\n", 
 				   us->srb->result);
 			us->srb->scsi_done(us->srb);
@@ -524,7 +529,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id)
 		if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE))
 			printk(KERN_NOTICE USB_STORAGE "This device "
 				"(%04x,%04x,%04x S %02x P %02x)"
-				" has %s in unusual_devs.h\n"
+				" has %s in unusual_devs.h (kernel"
+				" %s)\n"
 				"   Please send a copy of this message to "
 				"<linux-usb-devel@lists.sourceforge.net>\n",
 				le16_to_cpu(ddesc->idVendor),
@@ -532,7 +538,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id)
 				le16_to_cpu(ddesc->bcdDevice),
 				idesc->bInterfaceSubClass,
 				idesc->bInterfaceProtocol,
-				msgs[msg]);
+				msgs[msg],
+				UTS_RELEASE);
 	}
 }
 
@@ -836,32 +843,34 @@ static void dissociate_dev(struct us_data *us)
  * the host */
 static void quiesce_and_remove_host(struct us_data *us)
 {
+	struct Scsi_Host *host = us_to_host(us);
+
 	/* Prevent new USB transfers, stop the current command, and
 	 * interrupt a SCSI-scan or device-reset delay */
+	scsi_lock(host);
 	set_bit(US_FLIDX_DISCONNECTING, &us->flags);
+	scsi_unlock(host);
 	usb_stor_stop_transport(us);
 	wake_up(&us->delay_wait);
 
 	/* It doesn't matter if the SCSI-scanning thread is still running.
 	 * The thread will exit when it sees the DISCONNECTING flag. */
 
-	/* Wait for the current command to finish, then remove the host */
-	mutex_lock(&us->dev_mutex);
-	mutex_unlock(&us->dev_mutex);
-
 	/* queuecommand won't accept any new commands and the control
 	 * thread won't execute a previously-queued command.  If there
 	 * is such a command pending, complete it with an error. */
+	mutex_lock(&us->dev_mutex);
 	if (us->srb) {
 		us->srb->result = DID_NO_CONNECT << 16;
-		scsi_lock(us_to_host(us));
+		scsi_lock(host);
 		us->srb->scsi_done(us->srb);
 		us->srb = NULL;
-		scsi_unlock(us_to_host(us));
+		scsi_unlock(host);
 	}
+	mutex_unlock(&us->dev_mutex);
 
 	/* Now we own no commands so it's safe to remove the SCSI host */
-	scsi_remove_host(us_to_host(us));
+	scsi_remove_host(host);
 }
 
 /* Second stage of disconnect processing: deallocate all resources */
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 5284abe..21f3ddb 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -176,8 +176,4 @@ extern void fill_inquiry_response(struct us_data *us,
 #define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
 #define scsi_lock(host)		spin_lock_irq(host->host_lock)
 
-
-/* Vendor ID list for devices that require special handling */
-#define USB_VENDOR_ID_GENESYS		0x05e3	/* Genesys Logic */
-
 #endif
diff --git a/drivers/video/68328fb.c b/drivers/video/68328fb.c
index 78488bb..0dda73d 100644
--- a/drivers/video/68328fb.c
+++ b/drivers/video/68328fb.c
@@ -32,7 +32,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3badb48..6533b0f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1518,6 +1518,26 @@ config FB_PXA_PARAMETERS
 
 	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
 
+config FB_MBX
+	tristate "2700G LCD framebuffer support"
+	depends on FB && ARCH_PXA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Framebuffer driver for the Intel 2700G (Marathon) Graphics
+	  Accelerator
+
+config FB_MBX_DEBUG
+       bool "Enable debugging info via debugfs"
+       depends on FB_MBX && DEBUG_FS
+       default n
+       ---help---
+         Enable this if you want debugging information using the debug
+         filesystem (debugfs)
+
+         If unsure, say N.
+
 config FB_W100
 	tristate "W100 frame buffer support"
 	depends on FB && PXA_SHARPSL
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 6283d01..95563c9 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_FB_SIS)		  += sis/
 obj-$(CONFIG_FB_KYRO)             += kyro/
 obj-$(CONFIG_FB_SAVAGE)		  += savage/
 obj-$(CONFIG_FB_GEODE)		  += geode/
+obj-$(CONFIG_FB_MBX)		  += mbx/
 obj-$(CONFIG_FB_I810)             += vgastate.o
 obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o vgastate.o
 obj-$(CONFIG_FB_VIRGE)            += virgefb.o
diff --git a/drivers/video/S3triofb.c b/drivers/video/S3triofb.c
index e714e84..afd146f 100644
--- a/drivers/video/S3triofb.c
+++ b/drivers/video/S3triofb.c
@@ -28,7 +28,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index f9bc9f7..f1ba54f 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -45,7 +45,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index fd95c2d..70dd811 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -39,7 +39,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c
index eaeaf4d..1fd22f4 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/asiliantfb.c
@@ -34,7 +34,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index e69ab65..5831893 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -53,7 +53,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 72c5891..c64a717 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -52,7 +52,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
@@ -456,6 +455,7 @@ static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par);
 static void wait_for_fifo(u16 entries, struct aty128fb_par *par);
 static void wait_for_idle(struct aty128fb_par *par);
 static u32 depth_to_dst(u32 depth);
+static void aty128_bl_set_power(struct fb_info *info, int power);
 
 #define BIOS_IN8(v)  	(readb(bios + (v)))
 #define BIOS_IN16(v) 	(readb(bios + (v)) | \
@@ -1258,25 +1258,11 @@ static void aty128_set_lcd_enable(struct aty128fb_par *par, int on)
 		reg &= ~LVDS_DISPLAY_DIS;
 		aty_st_le32(LVDS_GEN_CNTL, reg);
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-		mutex_lock(&info->bl_mutex);
-		if (info->bl_dev) {
-			down(&info->bl_dev->sem);
-			info->bl_dev->props->update_status(info->bl_dev);
-			up(&info->bl_dev->sem);
-		}
-		mutex_unlock(&info->bl_mutex);
+		aty128_bl_set_power(info, FB_BLANK_UNBLANK);
 #endif	
 	} else {
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-		mutex_lock(&info->bl_mutex);
-		if (info->bl_dev) {
-			down(&info->bl_dev->sem);
-			info->bl_dev->props->brightness = 0;
-			info->bl_dev->props->power = FB_BLANK_POWERDOWN;
-			info->bl_dev->props->update_status(info->bl_dev);
-			up(&info->bl_dev->sem);
-		}
-		mutex_unlock(&info->bl_mutex);
+		aty128_bl_set_power(info, FB_BLANK_POWERDOWN);
 #endif	
 		reg = aty_ld_le32(LVDS_GEN_CNTL);
 		reg |= LVDS_DISPLAY_DIS;
@@ -1703,6 +1689,7 @@ static int __devinit aty128fb_setup(char *options)
 
 static struct backlight_properties aty128_bl_data;
 
+/* Call with fb_info->bl_mutex held */
 static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
 		int level)
 {
@@ -1710,10 +1697,8 @@ static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
 	int atylevel;
 
 	/* Get and convert the value */
-	mutex_lock(&info->bl_mutex);
 	atylevel = MAX_LEVEL -
 		(info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL);
-	mutex_unlock(&info->bl_mutex);
 
 	if (atylevel < 0)
 		atylevel = 0;
@@ -1731,7 +1716,8 @@ static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
 /* That one prevents proper CRT output with LCD off */
 #undef BACKLIGHT_DAC_OFF
 
-static int aty128_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __aty128_bl_update_status(struct backlight_device *bd)
 {
 	struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
 	unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
@@ -1784,6 +1770,19 @@ static int aty128_bl_update_status(struct backlight_device *bd)
 	return 0;
 }
 
+static int aty128_bl_update_status(struct backlight_device *bd)
+{
+	struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
+	struct fb_info *info = pci_get_drvdata(par->pdev);
+	int ret;
+
+	mutex_lock(&info->bl_mutex);
+	ret = __aty128_bl_update_status(bd);
+	mutex_unlock(&info->bl_mutex);
+
+	return ret;
+}
+
 static int aty128_bl_get_brightness(struct backlight_device *bd)
 {
 	return bd->props->brightness;
@@ -1796,6 +1795,16 @@ static struct backlight_properties aty128_bl_data = {
 	.max_brightness	= (FB_BACKLIGHT_LEVELS - 1),
 };
 
+static void aty128_bl_set_power(struct fb_info *info, int power)
+{
+	mutex_lock(&info->bl_mutex);
+	up(&info->bl_dev->sem);
+	info->bl_dev->props->power = power;
+	__aty128_bl_update_status(info->bl_dev);
+	down(&info->bl_dev->sem);
+	mutex_unlock(&info->bl_mutex);
+}
+
 static void aty128_bl_init(struct aty128fb_par *par)
 {
 	struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -2198,12 +2207,8 @@ static int aty128fb_blank(int blank, struct fb_info *fb)
 		return 0;
 
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-	if (machine_is(powermac) && blank) {
-		down(&fb->bl_dev->sem);
-		fb->bl_dev->props->power = FB_BLANK_POWERDOWN;
-		fb->bl_dev->props->update_status(fb->bl_dev);
-		up(&fb->bl_dev->sem);
-	}
+	if (machine_is(powermac) && blank)
+		aty128_bl_set_power(fb, FB_BLANK_POWERDOWN);
 #endif
 
 	if (blank & FB_BLANK_VSYNC_SUSPEND)
@@ -2219,14 +2224,12 @@ static int aty128fb_blank(int blank, struct fb_info *fb)
 		aty128_set_crt_enable(par, par->crt_on && !blank);
 		aty128_set_lcd_enable(par, par->lcd_on && !blank);
 	}
+
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-	if (machine_is(powermac) && !blank) {
-		down(&fb->bl_dev->sem);
-		fb->bl_dev->props->power = FB_BLANK_UNBLANK;
-		fb->bl_dev->props->update_status(fb->bl_dev);
-		up(&fb->bl_dev->sem);
-	}
+	if (machine_is(powermac) && !blank)
+		aty128_bl_set_power(fb, FB_BLANK_UNBLANK);
 #endif
+
 	return 0;
 }
 
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 0c97067..1507d19 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2129,15 +2129,14 @@ static int atyfb_pci_resume(struct pci_dev *pdev)
 
 static struct backlight_properties aty_bl_data;
 
+/* Call with fb_info->bl_mutex held */
 static int aty_bl_get_level_brightness(struct atyfb_par *par, int level)
 {
 	struct fb_info *info = pci_get_drvdata(par->pdev);
 	int atylevel;
 
 	/* Get and convert the value */
-	mutex_lock(&info->bl_mutex);
 	atylevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
-	mutex_unlock(&info->bl_mutex);
 
 	if (atylevel < 0)
 		atylevel = 0;
@@ -2147,7 +2146,8 @@ static int aty_bl_get_level_brightness(struct atyfb_par *par, int level)
 	return atylevel;
 }
 
-static int aty_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __aty_bl_update_status(struct backlight_device *bd)
 {
 	struct atyfb_par *par = class_get_devdata(&bd->class_dev);
 	unsigned int reg = aty_ld_lcd(LCD_MISC_CNTL, par);
@@ -2172,6 +2172,19 @@ static int aty_bl_update_status(struct backlight_device *bd)
 	return 0;
 }
 
+static int aty_bl_update_status(struct backlight_device *bd)
+{
+	struct atyfb_par *par = class_get_devdata(&bd->class_dev);
+	struct fb_info *info = pci_get_drvdata(par->pdev);
+	int ret;
+
+	mutex_lock(&info->bl_mutex);
+	ret = __aty_bl_update_status(bd);
+	mutex_unlock(&info->bl_mutex);
+
+	return ret;
+}
+
 static int aty_bl_get_brightness(struct backlight_device *bd)
 {
 	return bd->props->brightness;
@@ -2184,6 +2197,16 @@ static struct backlight_properties aty_bl_data = {
 	.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
 };
 
+static void aty_bl_set_power(struct fb_info *info, int power)
+{
+	mutex_lock(&info->bl_mutex);
+	up(&info->bl_dev->sem);
+	info->bl_dev->props->power = power;
+	__aty_bl_update_status(info->bl_dev);
+	down(&info->bl_dev->sem);
+	mutex_unlock(&info->bl_mutex);
+}
+
 static void aty_bl_init(struct atyfb_par *par)
 {
 	struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -2790,16 +2813,8 @@ static int atyfb_blank(int blank, struct fb_info *info)
 		return 0;
 
 #ifdef CONFIG_PMAC_BACKLIGHT
-	if (machine_is(powermac) && blank > FB_BLANK_NORMAL) {
-		mutex_lock(&info->bl_mutex);
-		if (info->bl_dev) {
-			down(&info->bl_dev->sem);
-			info->bl_dev->props->power = FB_BLANK_POWERDOWN;
-			info->bl_dev->props->update_status(info->bl_dev);
-			up(&info->bl_dev->sem);
-		}
-		mutex_unlock(&info->bl_mutex);
-	}
+	if (machine_is(powermac) && blank > FB_BLANK_NORMAL)
+		aty_bl_set_power(info, FB_BLANK_POWERDOWN);
 #elif defined(CONFIG_FB_ATY_GENERIC_LCD)
 	if (par->lcd_table && blank > FB_BLANK_NORMAL &&
 	    (aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
@@ -2830,16 +2845,8 @@ static int atyfb_blank(int blank, struct fb_info *info)
 	aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
-	if (machine_is(powermac) && blank <= FB_BLANK_NORMAL) {
-		mutex_lock(&info->bl_mutex);
-		if (info->bl_dev) {
-			down(&info->bl_dev->sem);
-			info->bl_dev->props->power = FB_BLANK_UNBLANK;
-			info->bl_dev->props->update_status(info->bl_dev);
-			up(&info->bl_dev->sem);
-		}
-		mutex_unlock(&info->bl_mutex);
-	}
+	if (machine_is(powermac) && blank <= FB_BLANK_NORMAL)
+		aty_bl_set_power(info, FB_BLANK_UNBLANK);
 #elif defined(CONFIG_FB_ATY_GENERIC_LCD)
 	if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
 	    (aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 51b78f8..8d85fc5 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -58,7 +58,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/time.h>
diff --git a/drivers/video/chipsfb.c b/drivers/video/chipsfb.c
index 0e465c8..73cb426 100644
--- a/drivers/video/chipsfb.c
+++ b/drivers/video/chipsfb.c
@@ -19,7 +19,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
@@ -150,12 +149,11 @@ static int chipsfb_blank(int blank, struct fb_info *info)
 	mutex_lock(&pmac_backlight_mutex);
 
 	if (pmac_backlight) {
-		down(&pmac_backlight->sem);
-
 		/* used to disable backlight only for blank > 1, but it seems
 		 * useful at blank = 1 too (saves battery, extends backlight
 		 * life)
 	 	 */
+		down(&pmac_backlight->sem);
 		if (blank)
 			pmac_backlight->props->power = FB_BLANK_POWERDOWN;
 		else
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 7355da09..daf43f5 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -41,7 +41,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/console/dummycon.c b/drivers/video/console/dummycon.c
index 878707a..d9315d9 100644
--- a/drivers/video/console/dummycon.c
+++ b/drivers/video/console/dummycon.c
@@ -7,9 +7,9 @@
 
 #include <linux/types.h>
 #include <linux/kdev_t.h>
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/vt_kern.h>
+#include <linux/screen_info.h>
 #include <linux/init.h>
 #include <linux/module.h>
 
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 94e9f70..390439b 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -64,7 +64,6 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>	/* MSch: for IRQ probe */
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/string.h>
 #include <linux/kd.h>
diff --git a/drivers/video/console/mdacon.c b/drivers/video/console/mdacon.c
index c89f90ed..52ed12b 100644
--- a/drivers/video/console/mdacon.c
+++ b/drivers/video/console/mdacon.c
@@ -31,7 +31,6 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/string.h>
 #include <linux/kd.h>
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index 0304131..7fa1afe 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/tty.h>
 #include <linux/kd.h>
 #include <linux/selection.h>
 #include <linux/console.h>
diff --git a/drivers/video/console/promcon.c b/drivers/video/console/promcon.c
index 5cd5e11..b78eac6 100644
--- a/drivers/video/console/promcon.c
+++ b/drivers/video/console/promcon.c
@@ -10,7 +10,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/console.h>
diff --git a/drivers/video/console/softcursor.c b/drivers/video/console/softcursor.c
index 3957fc7..557c563 100644
--- a/drivers/video/console/softcursor.c
+++ b/drivers/video/console/softcursor.c
@@ -10,7 +10,6 @@
 
 #include <linux/module.h>
 #include <linux/string.h>
-#include <linux/tty.h>
 #include <linux/fb.h>
 #include <linux/slab.h>
 
diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index 45c4f22..45586aa 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -37,7 +37,6 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/errno.h>
 #include <linux/vt_kern.h>
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 05735ff..0a2c10a 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -38,7 +38,6 @@
 #include <linux/sched.h>
 #include <linux/fs.h>
 #include <linux/kernel.h>
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/string.h>
 #include <linux/kd.h>
@@ -48,6 +47,7 @@
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
+#include <linux/screen_info.h>
 #include <linux/smp_lock.h>
 #include <video/vga.h>
 #include <asm/io.h>
diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
index acdd6a1..8cc6c0e 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -36,7 +36,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 2e29249..aae6d9c 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -41,7 +41,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/cyberfb.c b/drivers/video/cyberfb.c
index a3e189f..c40e72d 100644
--- a/drivers/video/cyberfb.c
+++ b/drivers/video/cyberfb.c
@@ -81,7 +81,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/zorro.h>
diff --git a/drivers/video/dnfb.c b/drivers/video/dnfb.c
index 5abd3cb..b083ea7 100644
--- a/drivers/video/dnfb.c
+++ b/drivers/video/dnfb.c
@@ -2,7 +2,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index f0a621e..737257d 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -48,7 +48,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c
index 1f98392..e8b135f 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbcmap.c
@@ -13,7 +13,6 @@
 
 #include <linux/string.h>
 #include <linux/module.h>
-#include <linux/tty.h>
 #include <linux/fb.h>
 #include <linux/slab.h>
 
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 33034f8..4fc9df4 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -23,7 +23,7 @@
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/mman.h>
-#include <linux/tty.h>
+#include <linux/vt.h>
 #include <linux/init.h>
 #include <linux/linux_logo.h>
 #include <linux/proc_fs.h>
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 3ccfff7..de93139 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -26,7 +26,6 @@
  * for more details.
  *
  */
-#include <linux/tty.h>
 #include <linux/fb.h>
 #include <linux/module.h>
 #include <linux/pci.h>
diff --git a/drivers/video/g364fb.c b/drivers/video/g364fb.c
index 605d1a1..1b981b6 100644
--- a/drivers/video/g364fb.c
+++ b/drivers/video/g364fb.c
@@ -21,7 +21,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/geode/gx1fb_core.c
index 4d3a887..bcf9cea 100644
--- a/drivers/video/geode/gx1fb_core.c
+++ b/drivers/video/geode/gx1fb_core.c
@@ -15,7 +15,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 5ef12a3..0d3643f 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -25,7 +25,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c
index 4e39035..fb9e672 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/hgafb.c
@@ -36,7 +36,6 @@
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 0186476..4cc6b45 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -17,7 +17,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff --git a/drivers/video/hpfb.c b/drivers/video/hpfb.c
index abd920a..91cf3b5 100644
--- a/drivers/video/hpfb.c
+++ b/drivers/video/hpfb.c
@@ -11,7 +11,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index fbe8a2c..a6ca02f 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -33,7 +33,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/fb.h>
 #include <linux/init.h>
diff --git a/drivers/video/igafb.c b/drivers/video/igafb.c
index 8a0c2d3..67f384f 100644
--- a/drivers/video/igafb.c
+++ b/drivers/video/igafb.c
@@ -33,7 +33,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/imacfb.c b/drivers/video/imacfb.c
index cdbae17..ff233b8 100644
--- a/drivers/video/imacfb.c
+++ b/drivers/video/imacfb.c
@@ -15,9 +15,9 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/screen_info.h>
 #include <linux/slab.h>
 #include <linux/string.h>
-#include <linux/tty.h>
 
 #include <asm/io.h>
 
diff --git a/drivers/video/imsttfb.c b/drivers/video/imsttfb.c
index 5f393d9..5715b8a 100644
--- a/drivers/video/imsttfb.c
+++ b/drivers/video/imsttfb.c
@@ -21,7 +21,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c
index 3f39d84..06af89d 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/intelfb/intelfbdrv.c
@@ -113,7 +113,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
@@ -122,6 +121,7 @@
 #include <linux/pci.h>
 #include <linux/vmalloc.h>
 #include <linux/pagemap.h>
+#include <linux/screen_info.h>
 
 #include <asm/io.h>
 
diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/intelfb/intelfbhw.c
index 3b78a57..2a9322f 100644
--- a/drivers/video/intelfb/intelfbhw.c
+++ b/drivers/video/intelfb/intelfbhw.c
@@ -24,7 +24,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/kyro/fbdev.c b/drivers/video/kyro/fbdev.c
index 2fdbe9b..f0d614a 100644
--- a/drivers/video/kyro/fbdev.c
+++ b/drivers/video/kyro/fbdev.c
@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <linux/errno.h>
 #include <linux/string.h>
-#include <linux/tty.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/ioctl.h>
diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c
index e6cbd9d..80a0438 100644
--- a/drivers/video/macfb.c
+++ b/drivers/video/macfb.c
@@ -24,7 +24,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/nubus.h>
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index b95779b..9c25c2f 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -30,7 +30,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/maxinefb.c b/drivers/video/maxinefb.c
index f85421b..38c8d38 100644
--- a/drivers/video/maxinefb.c
+++ b/drivers/video/maxinefb.c
@@ -29,7 +29,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff --git a/drivers/video/mbx/Makefile b/drivers/video/mbx/Makefile
new file mode 100644
index 0000000..16c1165
--- /dev/null
+++ b/drivers/video/mbx/Makefile
@@ -0,0 +1,4 @@
+# Makefile for the 2700G controller driver.
+
+obj-$(CONFIG_FB_MBX)	   += mbxfb.o
+obj-$(CONFIG_FB_MBX_DEBUG) += mbxfbdebugfs.o
diff --git a/drivers/video/mbx/mbxdebugfs.c b/drivers/video/mbx/mbxdebugfs.c
new file mode 100644
index 0000000..84aab3a
--- /dev/null
+++ b/drivers/video/mbx/mbxdebugfs.c
@@ -0,0 +1,188 @@
+#include <linux/debugfs.h>
+
+#define BIG_BUFFER_SIZE	(1024)
+
+static char big_buffer[BIG_BUFFER_SIZE];
+
+struct mbxfb_debugfs_data {
+	struct dentry *dir;
+	struct dentry *sysconf;
+	struct dentry *clock;
+	struct dentry *display;
+	struct dentry *gsctl;
+};
+
+static int open_file_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->u.generic_ip;
+	return 0;
+}
+
+static ssize_t write_file_dummy(struct file *file, const char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	return count;
+}
+
+static ssize_t sysconf_read_file(struct file *file, char __user *userbuf,
+				 size_t count, loff_t *ppos)
+{
+	char * s = big_buffer;
+
+	s += sprintf(s, "SYSCFG = %08lx\n", SYSCFG);
+	s += sprintf(s, "PFBASE = %08lx\n", PFBASE);
+	s += sprintf(s, "PFCEIL = %08lx\n", PFCEIL);
+	s += sprintf(s, "POLLFLAG = %08lx\n", POLLFLAG);
+	s += sprintf(s, "SYSRST = %08lx\n", SYSRST);
+
+	return  simple_read_from_buffer(userbuf, count, ppos,
+					big_buffer, s-big_buffer);
+}
+
+
+static ssize_t gsctl_read_file(struct file *file, char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	char * s = big_buffer;
+
+	s += sprintf(s, "GSCTRL = %08lx\n", GSCTRL);
+	s += sprintf(s, "VSCTRL = %08lx\n", VSCTRL);
+	s += sprintf(s, "GBBASE = %08lx\n", GBBASE);
+	s += sprintf(s, "VBBASE = %08lx\n", VBBASE);
+	s += sprintf(s, "GDRCTRL = %08lx\n", GDRCTRL);
+	s += sprintf(s, "VCMSK = %08lx\n", VCMSK);
+	s += sprintf(s, "GSCADR = %08lx\n", GSCADR);
+	s += sprintf(s, "VSCADR = %08lx\n", VSCADR);
+	s += sprintf(s, "VUBASE = %08lx\n", VUBASE);
+	s += sprintf(s, "VVBASE = %08lx\n", VVBASE);
+	s += sprintf(s, "GSADR = %08lx\n", GSADR);
+	s += sprintf(s, "VSADR = %08lx\n", VSADR);
+	s += sprintf(s, "HCCTRL = %08lx\n", HCCTRL);
+	s += sprintf(s, "HCSIZE = %08lx\n", HCSIZE);
+	s += sprintf(s, "HCPOS = %08lx\n", HCPOS);
+	s += sprintf(s, "HCBADR = %08lx\n", HCBADR);
+	s += sprintf(s, "HCCKMSK = %08lx\n", HCCKMSK);
+	s += sprintf(s, "GPLUT = %08lx\n", GPLUT);
+
+	return  simple_read_from_buffer(userbuf, count, ppos,
+					big_buffer, s-big_buffer);
+}
+
+static ssize_t display_read_file(struct file *file, char __user *userbuf,
+				 size_t count, loff_t *ppos)
+{
+	char * s = big_buffer;
+
+	s += sprintf(s, "DSCTRL = %08lx\n", DSCTRL);
+	s += sprintf(s, "DHT01 = %08lx\n", DHT01);
+	s += sprintf(s, "DHT02 = %08lx\n", DHT02);
+	s += sprintf(s, "DHT03 = %08lx\n", DHT03);
+	s += sprintf(s, "DVT01 = %08lx\n", DVT01);
+	s += sprintf(s, "DVT02 = %08lx\n", DVT02);
+	s += sprintf(s, "DVT03 = %08lx\n", DVT03);
+	s += sprintf(s, "DBCOL = %08lx\n", DBCOL);
+	s += sprintf(s, "BGCOLOR = %08lx\n", BGCOLOR);
+	s += sprintf(s, "DINTRS = %08lx\n", DINTRS);
+	s += sprintf(s, "DINTRE = %08lx\n", DINTRE);
+	s += sprintf(s, "DINTRCNT = %08lx\n", DINTRCNT);
+	s += sprintf(s, "DSIG = %08lx\n", DSIG);
+	s += sprintf(s, "DMCTRL = %08lx\n", DMCTRL);
+	s += sprintf(s, "CLIPCTRL = %08lx\n", CLIPCTRL);
+	s += sprintf(s, "SPOCTRL = %08lx\n", SPOCTRL);
+	s += sprintf(s, "SVCTRL = %08lx\n", SVCTRL);
+	s += sprintf(s, "DLSTS = %08lx\n", DLSTS);
+	s += sprintf(s, "DLLCTRL = %08lx\n", DLLCTRL);
+	s += sprintf(s, "DVLNUM = %08lx\n", DVLNUM);
+	s += sprintf(s, "DUCTRL = %08lx\n", DUCTRL);
+	s += sprintf(s, "DVECTRL = %08lx\n", DVECTRL);
+	s += sprintf(s, "DHDET = %08lx\n", DHDET);
+	s += sprintf(s, "DVDET = %08lx\n", DVDET);
+	s += sprintf(s, "DODMSK = %08lx\n", DODMSK);
+	s += sprintf(s, "CSC01 = %08lx\n", CSC01);
+	s += sprintf(s, "CSC02 = %08lx\n", CSC02);
+	s += sprintf(s, "CSC03 = %08lx\n", CSC03);
+	s += sprintf(s, "CSC04 = %08lx\n", CSC04);
+	s += sprintf(s, "CSC05 = %08lx\n", CSC05);
+
+	return  simple_read_from_buffer(userbuf, count, ppos,
+					big_buffer, s-big_buffer);
+}
+
+static ssize_t clock_read_file(struct file *file, char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	char * s = big_buffer;
+
+	s += sprintf(s, "SYSCLKSRC = %08lx\n", SYSCLKSRC);
+	s += sprintf(s, "PIXCLKSRC = %08lx\n", PIXCLKSRC);
+	s += sprintf(s, "CLKSLEEP = %08lx\n", CLKSLEEP);
+	s += sprintf(s, "COREPLL = %08lx\n", COREPLL);
+	s += sprintf(s, "DISPPLL = %08lx\n", DISPPLL);
+	s += sprintf(s, "PLLSTAT = %08lx\n", PLLSTAT);
+	s += sprintf(s, "VOVRCLK = %08lx\n", VOVRCLK);
+	s += sprintf(s, "PIXCLK = %08lx\n", PIXCLK);
+	s += sprintf(s, "MEMCLK = %08lx\n", MEMCLK);
+	s += sprintf(s, "M24CLK = %08lx\n", M24CLK);
+	s += sprintf(s, "MBXCLK = %08lx\n", MBXCLK);
+	s += sprintf(s, "SDCLK = %08lx\n", SDCLK);
+	s += sprintf(s, "PIXCLKDIV = %08lx\n", PIXCLKDIV);
+
+	return  simple_read_from_buffer(userbuf, count, ppos,
+					big_buffer, s-big_buffer);
+}
+
+static struct file_operations sysconf_fops = {
+	.read = sysconf_read_file,
+	.write = write_file_dummy,
+	.open = open_file_generic,
+};
+
+static struct file_operations clock_fops = {
+	.read = clock_read_file,
+	.write = write_file_dummy,
+	.open = open_file_generic,
+};
+
+static struct file_operations display_fops = {
+	.read = display_read_file,
+	.write = write_file_dummy,
+	.open = open_file_generic,
+};
+
+static struct file_operations gsctl_fops = {
+	.read = gsctl_read_file,
+	.write = write_file_dummy,
+	.open = open_file_generic,
+};
+
+
+static void __devinit mbxfb_debugfs_init(struct fb_info *fbi)
+{
+	struct mbxfb_info *mfbi = fbi->par;
+	struct mbxfb_debugfs_data *dbg;
+
+	dbg = kzalloc(sizeof(struct mbxfb_debugfs_data), GFP_KERNEL);
+	mfbi->debugfs_data = dbg;
+
+	dbg->dir = debugfs_create_dir("mbxfb", NULL);
+	dbg->sysconf = debugfs_create_file("sysconf", 0444, dbg->dir,
+				      fbi, &sysconf_fops);
+	dbg->clock = debugfs_create_file("clock", 0444, dbg->dir,
+				    fbi, &clock_fops);
+	dbg->display = debugfs_create_file("display", 0444, dbg->dir,
+				      fbi, &display_fops);
+	dbg->gsctl = debugfs_create_file("gsctl", 0444, dbg->dir,
+				    fbi, &gsctl_fops);
+}
+
+static void __devexit mbxfb_debugfs_remove(struct fb_info *fbi)
+{
+	struct mbxfb_info *mfbi = fbi->par;
+	struct mbxfb_debugfs_data *dbg = mfbi->debugfs_data;
+
+	debugfs_remove(dbg->gsctl);
+	debugfs_remove(dbg->display);
+	debugfs_remove(dbg->clock);
+	debugfs_remove(dbg->sysconf);
+	debugfs_remove(dbg->dir);
+}
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
new file mode 100644
index 0000000..6849ab7
--- /dev/null
+++ b/drivers/video/mbx/mbxfb.c
@@ -0,0 +1,683 @@
+/*
+ *  linux/drivers/video/mbx/mbxfb.c
+ *
+ *  Copyright (C) 2006 Compulab, Ltd.
+ *  Mike Rapoport <mike@compulab.co.il>
+ *
+ *   Based on pxafb.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ *   Intel 2700G (Marathon) Graphics Accelerator Frame Buffer Driver
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#include <video/mbxfb.h>
+
+#include "regs.h"
+#include "reg_bits.h"
+
+static unsigned long virt_base_2700;
+
+#define MIN_XRES	16
+#define MIN_YRES	16
+#define MAX_XRES	2048
+#define MAX_YRES	2048
+
+#define MAX_PALETTES	16
+
+/* FIXME: take care of different chip revisions with different sizes
+   of ODFB */
+#define MEMORY_OFFSET	0x60000
+
+struct mbxfb_info {
+	struct device *dev;
+
+	struct resource *fb_res;
+	struct resource *fb_req;
+
+	struct resource *reg_res;
+	struct resource *reg_req;
+
+	void __iomem *fb_virt_addr;
+	unsigned long fb_phys_addr;
+
+	void __iomem *reg_virt_addr;
+	unsigned long reg_phys_addr;
+
+	int (*platform_probe) (struct fb_info * fb);
+	int (*platform_remove) (struct fb_info * fb);
+
+	u32 pseudo_palette[MAX_PALETTES];
+#ifdef CONFIG_FB_MBX_DEBUG
+	void *debugfs_data;
+#endif
+
+};
+
+static struct fb_var_screeninfo mbxfb_default __devinitdata = {
+	.xres = 640,
+	.yres = 480,
+	.xres_virtual = 640,
+	.yres_virtual = 480,
+	.bits_per_pixel = 16,
+	.red = {11, 5, 0},
+	.green = {5, 6, 0},
+	.blue = {0, 5, 0},
+	.activate = FB_ACTIVATE_TEST,
+	.height = -1,
+	.width = -1,
+	.pixclock = 40000,
+	.left_margin = 48,
+	.right_margin = 16,
+	.upper_margin = 33,
+	.lower_margin = 10,
+	.hsync_len = 96,
+	.vsync_len = 2,
+	.vmode = FB_VMODE_NONINTERLACED,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_fix_screeninfo mbxfb_fix  __devinitdata = {
+	.id = "MBX",
+	.type = FB_TYPE_PACKED_PIXELS,
+	.visual = FB_VISUAL_TRUECOLOR,
+	.xpanstep = 0,
+	.ypanstep = 0,
+	.ywrapstep = 0,
+	.accel = FB_ACCEL_NONE,
+};
+
+struct pixclock_div {
+	u8 m;
+	u8 n;
+	u8 p;
+};
+
+static unsigned int mbxfb_get_pixclock(unsigned int pixclock_ps,
+				       struct pixclock_div *div)
+{
+	u8 m, n, p;
+	unsigned int err = 0;
+	unsigned int min_err = ~0x0;
+	unsigned int clk;
+	unsigned int best_clk = 0;
+	unsigned int ref_clk = 13000;	/* FIXME: take from platform data */
+	unsigned int pixclock;
+
+	/* convert pixclock to KHz */
+	pixclock = PICOS2KHZ(pixclock_ps);
+
+	for (m = 1; m < 64; m++) {
+		for (n = 1; n < 8; n++) {
+			for (p = 0; p < 8; p++) {
+				clk = (ref_clk * m) / (n * (1 << p));
+				err = (clk > pixclock) ? (clk - pixclock) :
+					(pixclock - clk);
+				if (err < min_err) {
+					min_err = err;
+					best_clk = clk;
+					div->m = m;
+					div->n = n;
+					div->p = p;
+				}
+			}
+		}
+	}
+	return KHZ2PICOS(best_clk);
+}
+
+static int mbxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+			   u_int trans, struct fb_info *info)
+{
+	u32 val, ret = 1;
+
+	if (regno < MAX_PALETTES) {
+		u32 *pal = info->pseudo_palette;
+
+		val = (red & 0xf800) | ((green & 0xfc00) >> 5) |
+			((blue & 0xf800) >> 11);
+		pal[regno] = val;
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int mbxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct pixclock_div div;
+
+	var->pixclock = mbxfb_get_pixclock(var->pixclock, &div);
+
+	if (var->xres < MIN_XRES)
+		var->xres = MIN_XRES;
+	if (var->yres < MIN_YRES)
+		var->yres = MIN_YRES;
+	if (var->xres > MAX_XRES)
+		return -EINVAL;
+	if (var->yres > MAX_YRES)
+		return -EINVAL;
+	var->xres_virtual = max(var->xres_virtual, var->xres);
+	var->yres_virtual = max(var->yres_virtual, var->yres);
+
+	switch (var->bits_per_pixel) {
+		/* 8 bits-per-pixel is not supported yet */
+	case 8:
+		return -EINVAL;
+	case 16:
+		var->green.length = (var->green.length == 5) ? 5 : 6;
+		var->red.length = 5;
+		var->blue.length = 5;
+		var->transp.length = 6 - var->green.length;
+		var->blue.offset = 0;
+		var->green.offset = 5;
+		var->red.offset = 5 + var->green.length;
+		var->transp.offset = (5 + var->red.offset) & 15;
+		break;
+	case 24:		/* RGB 888   */
+	case 32:		/* RGBA 8888 */
+		var->red.offset = 16;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		var->transp.length = var->bits_per_pixel - 24;
+		var->transp.offset = (var->transp.length) ? 24 : 0;
+		break;
+	}
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+	var->transp.msb_right = 0;
+
+	return 0;
+}
+
+static int mbxfb_set_par(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+	struct pixclock_div div;
+	ushort hbps, ht, hfps, has;
+	ushort vbps, vt, vfps, vas;
+	u32 gsctrl = readl(GSCTRL);
+	u32 gsadr = readl(GSADR);
+
+	info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+	/* setup color mode */
+	gsctrl &= ~(FMsk(GSCTRL_GPIXFMT));
+	/* FIXME: add *WORKING* support for 8-bits per color */
+	if (info->var.bits_per_pixel == 8) {
+		return -EINVAL;
+	} else {
+		fb_dealloc_cmap(&info->cmap);
+		gsctrl &= ~GSCTRL_LUT_EN;
+
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		switch (info->var.bits_per_pixel) {
+		case 16:
+			if (info->var.green.length == 5)
+				gsctrl |= GSCTRL_GPIXFMT_ARGB1555;
+			else
+				gsctrl |= GSCTRL_GPIXFMT_RGB565;
+			break;
+		case 24:
+			gsctrl |= GSCTRL_GPIXFMT_RGB888;
+			break;
+		case 32:
+			gsctrl |= GSCTRL_GPIXFMT_ARGB8888;
+			break;
+		}
+	}
+
+	/* setup resolution */
+	gsctrl &= ~(FMsk(GSCTRL_GSWIDTH) | FMsk(GSCTRL_GSHEIGHT));
+	gsctrl |= Gsctrl_Width(info->var.xres - 1) |
+		Gsctrl_Height(info->var.yres - 1);
+	writel(gsctrl, GSCTRL);
+	udelay(1000);
+
+	gsadr &= ~(FMsk(GSADR_SRCSTRIDE));
+	gsadr |= Gsadr_Srcstride(info->var.xres * info->var.bits_per_pixel /
+				 (8 * 16) - 1);
+	writel(gsadr, GSADR);
+	udelay(1000);
+
+	/* setup timings */
+	var->pixclock = mbxfb_get_pixclock(info->var.pixclock, &div);
+
+	writel((Disp_Pll_M(div.m) | Disp_Pll_N(div.n) |
+		Disp_Pll_P(div.p) | DISP_PLL_EN), DISPPLL);
+
+	hbps = var->hsync_len;
+	has = hbps + var->left_margin;
+	hfps = has + var->xres;
+	ht = hfps + var->right_margin;
+
+	vbps = var->vsync_len;
+	vas = vbps + var->upper_margin;
+	vfps = vas + var->yres;
+	vt = vfps + var->lower_margin;
+
+	writel((Dht01_Hbps(hbps) | Dht01_Ht(ht)), DHT01);
+	writel((Dht02_Hlbs(has) | Dht02_Has(has)), DHT02);
+	writel((Dht03_Hfps(hfps) | Dht03_Hrbs(hfps)), DHT03);
+	writel((Dhdet_Hdes(has) | Dhdet_Hdef(hfps)), DHDET);
+
+	writel((Dvt01_Vbps(vbps) | Dvt01_Vt(vt)), DVT01);
+	writel((Dvt02_Vtbs(vas) | Dvt02_Vas(vas)), DVT02);
+	writel((Dvt03_Vfps(vfps) | Dvt03_Vbbs(vfps)), DVT03);
+	writel((Dvdet_Vdes(vas) | Dvdet_Vdef(vfps)), DVDET);
+	writel((Dvectrl_Vevent(vfps) | Dvectrl_Vfetch(vbps)), DVECTRL);
+
+	writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+
+	return 0;
+}
+
+static int mbxfb_blank(int blank, struct fb_info *info)
+{
+	switch (blank) {
+	case FB_BLANK_POWERDOWN:
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_NORMAL:
+		writel((readl(DSCTRL) & ~DSCTRL_SYNCGEN_EN), DSCTRL);
+		udelay(1000);
+		writel((readl(PIXCLK) & ~PIXCLK_EN), PIXCLK);
+		udelay(1000);
+		writel((readl(VOVRCLK) & ~VOVRCLK_EN), VOVRCLK);
+		udelay(1000);
+		break;
+	case FB_BLANK_UNBLANK:
+		writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+		udelay(1000);
+		writel((readl(PIXCLK) | PIXCLK_EN), PIXCLK);
+		udelay(1000);
+		break;
+	}
+	return 0;
+}
+
+static struct fb_ops mbxfb_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = mbxfb_check_var,
+	.fb_set_par = mbxfb_set_par,
+	.fb_setcolreg = mbxfb_setcolreg,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_blank = mbxfb_blank,
+};
+
+/*
+  Enable external SDRAM controller. Assume that all clocks are active
+  by now.
+*/
+static void __devinit setup_memc(struct fb_info *fbi)
+{
+	struct mbxfb_info *mfbi = fbi->par;
+	unsigned long tmp;
+	int i;
+
+	/* FIXME: use platfrom specific parameters */
+	/* setup SDRAM controller */
+	writel((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS |
+		LMCFG_LMA_TS),
+	       LMCFG);
+	udelay(1000);
+
+	writel(LMPWR_MC_PWR_ACT, LMPWR);
+	udelay(1000);
+
+	/* setup SDRAM timings */
+	writel((Lmtim_Tras(7) | Lmtim_Trp(3) | Lmtim_Trcd(3) |
+		Lmtim_Trc(9) | Lmtim_Tdpl(2)),
+	       LMTIM);
+	udelay(1000);
+	/* setup SDRAM refresh rate */
+	writel(0xc2b, LMREFRESH);
+	udelay(1000);
+	/* setup SDRAM type parameters */
+	writel((LMTYPE_CASLAT_3 | LMTYPE_BKSZ_2 | LMTYPE_ROWSZ_11 |
+		LMTYPE_COLSZ_8),
+	       LMTYPE);
+	udelay(1000);
+	/* enable memory controller */
+	writel(LMPWR_MC_PWR_ACT, LMPWR);
+	udelay(1000);
+
+	/* perform dummy reads */
+	for ( i = 0; i < 16; i++ ) {
+		tmp = readl(fbi->screen_base);
+	}
+}
+
+static void enable_clocks(struct fb_info *fbi)
+{
+	/* enable clocks */
+	writel(SYSCLKSRC_PLL_2, SYSCLKSRC);
+	udelay(1000);
+	writel(PIXCLKSRC_PLL_1, PIXCLKSRC);
+	udelay(1000);
+	writel(0x00000000, CLKSLEEP);
+	udelay(1000);
+	writel((Core_Pll_M(0x17) | Core_Pll_N(0x3) | Core_Pll_P(0x0) |
+		CORE_PLL_EN),
+	       COREPLL);
+	udelay(1000);
+	writel((Disp_Pll_M(0x1b) | Disp_Pll_N(0x7) | Disp_Pll_P(0x1) |
+		DISP_PLL_EN),
+	       DISPPLL);
+
+	writel(0x00000000, VOVRCLK);
+	udelay(1000);
+	writel(PIXCLK_EN, PIXCLK);
+	udelay(1000);
+	writel(MEMCLK_EN, MEMCLK);
+	udelay(1000);
+	writel(0x00000006, M24CLK);
+	udelay(1000);
+	writel(0x00000006, MBXCLK);
+	udelay(1000);
+	writel(SDCLK_EN, SDCLK);
+	udelay(1000);
+	writel(0x00000001, PIXCLKDIV);
+	udelay(1000);
+}
+
+static void __devinit setup_graphics(struct fb_info *fbi)
+{
+	unsigned long gsctrl;
+
+	gsctrl = GSCTRL_GAMMA_EN | Gsctrl_Width(fbi->var.xres - 1) |
+		Gsctrl_Height(fbi->var.yres - 1);
+	switch (fbi->var.bits_per_pixel) {
+	case 16:
+		if (fbi->var.green.length == 5)
+			gsctrl |= GSCTRL_GPIXFMT_ARGB1555;
+		else
+			gsctrl |= GSCTRL_GPIXFMT_RGB565;
+		break;
+	case 24:
+		gsctrl |= GSCTRL_GPIXFMT_RGB888;
+		break;
+	case 32:
+		gsctrl |= GSCTRL_GPIXFMT_ARGB8888;
+		break;
+	}
+
+	writel(gsctrl, GSCTRL);
+	udelay(1000);
+	writel(0x00000000, GBBASE);
+	udelay(1000);
+	writel(0x00ffffff, GDRCTRL);
+	udelay(1000);
+	writel((GSCADR_STR_EN | Gscadr_Gbase_Adr(0x6000)), GSCADR);
+	udelay(1000);
+	writel(0x00000000, GPLUT);
+	udelay(1000);
+}
+
+static void __devinit setup_display(struct fb_info *fbi)
+{
+	unsigned long dsctrl = 0;
+
+	dsctrl = DSCTRL_BLNK_POL;
+	if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+		dsctrl |= DSCTRL_HS_POL;
+	if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+		dsctrl |= DSCTRL_VS_POL;
+	writel(dsctrl, DSCTRL);
+	udelay(1000);
+	writel(0xd0303010, DMCTRL);
+	udelay(1000);
+	writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+}
+
+static void __devinit enable_controller(struct fb_info *fbi)
+{
+	writel(SYSRST_RST, SYSRST);
+	udelay(1000);
+
+
+	enable_clocks(fbi);
+	setup_memc(fbi);
+	setup_graphics(fbi);
+	setup_display(fbi);
+}
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks.  Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+static int mbxfb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	/* make frame buffer memory enter self-refresh mode */
+	writel(LMPWR_MC_PWR_SRM, LMPWR);
+	while (LMPWRSTAT != LMPWRSTAT_MC_PWR_SRM)
+		; /* empty statement */
+
+	/* reset the device, since it's initial state is 'mostly sleeping' */
+	writel(SYSRST_RST, SYSRST);
+	return 0;
+}
+
+static int mbxfb_resume(struct platform_device *dev)
+{
+	struct fb_info *fbi = platform_get_drvdata(dev);
+
+	enable_clocks(fbi);
+/* 	setup_graphics(fbi); */
+/* 	setup_display(fbi); */
+
+	writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+	return 0;
+}
+#else
+#define mbxfb_suspend	NULL
+#define mbxfb_resume	NULL
+#endif
+
+/* debugfs entries */
+#ifndef CONFIG_FB_MBX_DEBUG
+#define mbxfb_debugfs_init(x)	do {} while(0)
+#define mbxfb_debugfs_remove(x)	do {} while(0)
+#endif
+
+#define res_size(_r) (((_r)->end - (_r)->start) + 1)
+
+static int __devinit mbxfb_probe(struct platform_device *dev)
+{
+	int ret;
+	struct fb_info *fbi;
+	struct mbxfb_info *mfbi;
+	struct mbxfb_platform_data *pdata;
+
+	dev_dbg(dev, "mbxfb_probe\n");
+
+	fbi = framebuffer_alloc(sizeof(struct mbxfb_info), &dev->dev);
+	if (fbi == NULL) {
+		dev_err(&dev->dev, "framebuffer_alloc failed\n");
+		return -ENOMEM;
+	}
+
+	mfbi = fbi->par;
+	fbi->pseudo_palette = mfbi->pseudo_palette;
+	pdata = dev->dev.platform_data;
+	if (pdata->probe)
+		mfbi->platform_probe = pdata->probe;
+	if (pdata->remove)
+		mfbi->platform_remove = pdata->remove;
+
+	mfbi->fb_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	mfbi->reg_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+
+	if (!mfbi->fb_res || !mfbi->reg_res) {
+		dev_err(&dev->dev, "no resources found\n");
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	mfbi->fb_req = request_mem_region(mfbi->fb_res->start,
+					  res_size(mfbi->fb_res), dev->name);
+	if (mfbi->fb_req == NULL) {
+		dev_err(&dev->dev, "failed to claim framebuffer memory\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+	mfbi->fb_phys_addr = mfbi->fb_res->start;
+
+	mfbi->reg_req = request_mem_region(mfbi->reg_res->start,
+					   res_size(mfbi->reg_res), dev->name);
+	if (mfbi->reg_req == NULL) {
+		dev_err(&dev->dev, "failed to claim Marathon registers\n");
+		ret = -EINVAL;
+		goto err2;
+	}
+	mfbi->reg_phys_addr = mfbi->reg_res->start;
+
+	mfbi->reg_virt_addr = ioremap_nocache(mfbi->reg_phys_addr,
+					      res_size(mfbi->reg_req));
+	if (!mfbi->reg_virt_addr) {
+		dev_err(&dev->dev, "failed to ioremap Marathon registers\n");
+		ret = -EINVAL;
+		goto err3;
+	}
+	virt_base_2700 = (unsigned long)mfbi->reg_virt_addr;
+
+	mfbi->fb_virt_addr = ioremap_nocache(mfbi->fb_phys_addr,
+					     res_size(mfbi->fb_req));
+	if (!mfbi->reg_virt_addr) {
+		dev_err(&dev->dev, "failed to ioremap frame buffer\n");
+		ret = -EINVAL;
+		goto err4;
+	}
+
+	/* FIXME: get from platform */
+	fbi->screen_base = (char __iomem *)(mfbi->fb_virt_addr + 0x60000);
+	fbi->screen_size = 8 * 1024 * 1024;	/* 8 Megs */
+	fbi->fbops = &mbxfb_ops;
+
+	fbi->var = mbxfb_default;
+	fbi->fix = mbxfb_fix;
+	fbi->fix.smem_start = mfbi->fb_phys_addr + 0x60000;
+	fbi->fix.smem_len = 8 * 1024 * 1024;
+	fbi->fix.line_length = 640 * 2;
+
+	ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
+	if (ret < 0) {
+		dev_err(&dev->dev, "fb_alloc_cmap failed\n");
+		ret = -EINVAL;
+		goto err5;
+	}
+
+	platform_set_drvdata(dev, fbi);
+
+	printk(KERN_INFO "fb%d: mbx frame buffer device\n", fbi->node);
+
+	if (mfbi->platform_probe)
+		mfbi->platform_probe(fbi);
+
+	enable_controller(fbi);
+
+	mbxfb_debugfs_init(fbi);
+
+	ret = register_framebuffer(fbi);
+	if (ret < 0) {
+		dev_err(&dev->dev, "register_framebuffer failed\n");
+		ret = -EINVAL;
+		goto err6;
+	}
+
+	return 0;
+
+err6:
+	fb_dealloc_cmap(&fbi->cmap);
+err5:
+	iounmap(mfbi->fb_virt_addr);
+err4:
+	iounmap(mfbi->reg_virt_addr);
+err3:
+	release_mem_region(mfbi->reg_res->start, res_size(mfbi->reg_res));
+err2:
+	release_mem_region(mfbi->fb_res->start, res_size(mfbi->fb_res));
+err1:
+	framebuffer_release(fbi);
+
+	return ret;
+}
+
+static int __devexit mbxfb_remove(struct platform_device *dev)
+{
+	struct fb_info *fbi = platform_get_drvdata(dev);
+
+	writel(SYSRST_RST, SYSRST);
+	udelay(1000);
+
+	mbxfb_debugfs_remove(fbi);
+
+	if (fbi) {
+		struct mbxfb_info *mfbi = fbi->par;
+
+		unregister_framebuffer(fbi);
+		if (mfbi) {
+			if (mfbi->platform_remove)
+				mfbi->platform_remove(fbi);
+
+			if (mfbi->fb_virt_addr)
+				iounmap(mfbi->fb_virt_addr);
+			if (mfbi->reg_virt_addr)
+				iounmap(mfbi->reg_virt_addr);
+			if (mfbi->reg_req)
+				release_mem_region(mfbi->reg_req->start,
+						   res_size(mfbi->reg_req));
+			if (mfbi->fb_req)
+				release_mem_region(mfbi->fb_req->start,
+						   res_size(mfbi->fb_req));
+		}
+		framebuffer_release(fbi);
+	}
+
+	return 0;
+}
+
+static struct platform_driver mbxfb_driver = {
+	.probe = mbxfb_probe,
+	.remove = mbxfb_remove,
+	.suspend = mbxfb_suspend,
+	.resume = mbxfb_resume,
+	.driver = {
+		.name = "mbx-fb",
+	},
+};
+
+int __devinit mbxfb_init(void)
+{
+	return platform_driver_register(&mbxfb_driver);
+}
+
+static void __devexit mbxfb_exit(void)
+{
+	platform_driver_unregister(&mbxfb_driver);
+}
+
+module_init(mbxfb_init);
+module_exit(mbxfb_exit);
+
+MODULE_DESCRIPTION("loadable framebuffer driver for Marathon device");
+MODULE_AUTHOR("Mike Rapoport, Compulab");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/mbx/reg_bits.h b/drivers/video/mbx/reg_bits.h
new file mode 100644
index 0000000..c226a8e
--- /dev/null
+++ b/drivers/video/mbx/reg_bits.h
@@ -0,0 +1,418 @@
+#ifndef __REG_BITS_2700G_
+#define __REG_BITS_2700G_
+
+/* use defines from asm-arm/arch-pxa/bitfields.h for bit fields access */
+#define UData(Data)	((unsigned long) (Data))
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+#define FSize(Field)	((Field) >> 16)
+#define FShft(Field)	((Field) & 0x0000FFFF)
+#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)	(UData (1) << FShft (Field))
+
+#define SYSRST_RST	(1 << 0)
+
+/* SYSCLKSRC - SYSCLK Source Control Register */
+#define SYSCLKSRC_SEL	Fld(2,0)
+#define SYSCLKSRC_REF	((0x0) << FShft(SYSCLKSRC_SEL))
+#define SYSCLKSRC_PLL_1	((0x1) << FShft(SYSCLKSRC_SEL))
+#define SYSCLKSRC_PLL_2	((0x2) << FShft(SYSCLKSRC_SEL))
+
+/* PIXCLKSRC - PIXCLK Source Control Register */
+#define PIXCLKSRC_SEL	Fld(2,0)
+#define PIXCLKSRC_REF	((0x0) << FShft(PIXCLKSRC_SEL))
+#define PIXCLKSRC_PLL_1	((0x1) << FShft(PIXCLKSRC_SEL))
+#define PIXCLKSRC_PLL_2	((0x2) << FShft(PIXCLKSRC_SEL))
+
+/* Clock Disable Register */
+#define CLKSLEEP_SLP	(1 << 0)
+
+/* Core PLL Control Register */
+#define CORE_PLL_M	Fld(6,7)
+#define Core_Pll_M(x)	((x) << FShft(CORE_PLL_M))
+#define CORE_PLL_N	Fld(3,4)
+#define Core_Pll_N(x)	((x) << FShft(CORE_PLL_N))
+#define CORE_PLL_P	Fld(3,1)
+#define Core_Pll_P(x)	((x) << FShft(CORE_PLL_P))
+#define CORE_PLL_EN	(1 << 0)
+
+/* Display PLL Control Register */
+#define DISP_PLL_M	Fld(6,7)
+#define Disp_Pll_M(x)	((x) << FShft(DISP_PLL_M))
+#define DISP_PLL_N	Fld(3,4)
+#define Disp_Pll_N(x)	((x) << FShft(DISP_PLL_N))
+#define DISP_PLL_P	Fld(3,1)
+#define Disp_Pll_P(x)	((x) << FShft(DISP_PLL_P))
+#define DISP_PLL_EN	(1 << 0)
+
+/* PLL status register */
+#define PLLSTAT_CORE_PLL_LOST_L	(1 << 3)
+#define PLLSTAT_CORE_PLL_LSTS	(1 << 2)
+#define PLLSTAT_DISP_PLL_LOST_L	(1 << 1)
+#define PLLSTAT_DISP_PLL_LSTS	(1 << 0)
+
+/* Video and scale clock control register */
+#define VOVRCLK_EN	(1 << 0)
+
+/* Pixel clock control register */
+#define PIXCLK_EN	(1 << 0)
+
+/* Memory clock control register */
+#define MEMCLK_EN	(1 << 0)
+
+/* MBX clock control register */
+#define MBXCLK_DIV	Fld(2,2)
+#define MBXCLK_DIV_1	((0x0) << FShft(MBXCLK_DIV))
+#define MBXCLK_DIV_2	((0x1) << FShft(MBXCLK_DIV))
+#define MBXCLK_DIV_3	((0x2) << FShft(MBXCLK_DIV))
+#define MBXCLK_DIV_4	((0x3) << FShft(MBXCLK_DIV))
+#define MBXCLK_EN	Fld(2,0)
+#define MBXCLK_EN_NONE	((0x0) << FShft(MBXCLK_EN))
+#define MBXCLK_EN_2D	((0x1) << FShft(MBXCLK_EN))
+#define MBXCLK_EN_BOTH	((0x2) << FShft(MBXCLK_EN))
+
+/* M24 clock control register */
+#define M24CLK_DIV	Fld(2,1)
+#define M24CLK_DIV_1	((0x0) << FShft(M24CLK_DIV))
+#define M24CLK_DIV_2	((0x1) << FShft(M24CLK_DIV))
+#define M24CLK_DIV_3	((0x2) << FShft(M24CLK_DIV))
+#define M24CLK_DIV_4	((0x3) << FShft(M24CLK_DIV))
+#define M24CLK_EN	(1 << 0)
+
+/* SDRAM clock control register */
+#define SDCLK_EN	(1 << 0)
+
+/* PixClk Divisor Register */
+#define PIXCLKDIV_PD	Fld(9,0)
+#define Pixclkdiv_Pd(x)	((x) << FShft(PIXCLKDIV_PD))
+
+/* LCD Config control register */
+#define LCDCFG_IN_FMT	Fld(3,28)
+#define Lcdcfg_In_Fmt(x)	((x) << FShft(LCDCFG_IN_FMT))
+#define LCDCFG_LCD1DEN_POL	(1 << 27)
+#define LCDCFG_LCD1FCLK_POL	(1 << 26)
+#define LCDCFG_LCD1LCLK_POL	(1 << 25)
+#define LCDCFG_LCD1D_POL	(1 << 24)
+#define LCDCFG_LCD2DEN_POL	(1 << 23)
+#define LCDCFG_LCD2FCLK_POL	(1 << 22)
+#define LCDCFG_LCD2LCLK_POL	(1 << 21)
+#define LCDCFG_LCD2D_POL	(1 << 20)
+#define LCDCFG_LCD1_TS		(1 << 19)
+#define LCDCFG_LCD1D_DS		(1 << 18)
+#define LCDCFG_LCD1C_DS		(1 << 17)
+#define LCDCFG_LCD1_IS_IN	(1 << 16)
+#define LCDCFG_LCD2_TS		(1 << 3)
+#define LCDCFG_LCD2D_DS		(1 << 2)
+#define LCDCFG_LCD2C_DS		(1 << 1)
+#define LCDCFG_LCD2_IS_IN	(1 << 0)
+
+/* On-Die Frame Buffer Power Control Register */
+#define ODFBPWR_SLOW	(1 << 2)
+#define ODFBPWR_MODE	Fld(2,0)
+#define ODFBPWR_MODE_ACT	((0x0) << FShft(ODFBPWR_MODE))
+#define ODFBPWR_MODE_ACT_LP	((0x1) << FShft(ODFBPWR_MODE))
+#define ODFBPWR_MODE_SLEEP	((0x2) << FShft(ODFBPWR_MODE))
+#define ODFBPWR_MODE_SHUTD	((0x3) << FShft(ODFBPWR_MODE))
+
+/* On-Die Frame Buffer Power State Status Register */
+#define ODFBSTAT_ACT	(1 << 2)
+#define ODFBSTAT_SLP	(1 << 1)
+#define ODFBSTAT_SDN	(1 << 0)
+
+/* LMRST - Local Memory (SDRAM) Reset */
+#define LMRST_MC_RST	(1 << 0)
+
+/* LMCFG - Local Memory (SDRAM) Configuration Register */
+#define LMCFG_LMC_DS	(1 << 5)
+#define LMCFG_LMD_DS	(1 << 4)
+#define LMCFG_LMA_DS	(1 << 3)
+#define LMCFG_LMC_TS	(1 << 2)
+#define LMCFG_LMD_TS	(1 << 1)
+#define LMCFG_LMA_TS	(1 << 0)
+
+/* LMPWR - Local Memory (SDRAM) Power Control Register */
+#define LMPWR_MC_PWR_CNT	Fld(2,0)
+#define LMPWR_MC_PWR_ACT	((0x0) << FShft(LMPWR_MC_PWR_CNT)) /* Active */
+#define LMPWR_MC_PWR_SRM	((0x1) << FShft(LMPWR_MC_PWR_CNT)) /* Self-refresh */
+#define LMPWR_MC_PWR_DPD	((0x3) << FShft(LMPWR_MC_PWR_CNT)) /* deep power down */
+
+/* LMPWRSTAT - Local Memory (SDRAM) Power Status Register */
+#define LMPWRSTAT_MC_PWR_CNT	Fld(2,0)
+#define LMPWRSTAT_MC_PWR_ACT	((0x0) << FShft(LMPWRSTAT_MC_PWR_CNT)) /* Active */
+#define LMPWRSTAT_MC_PWR_SRM	((0x1) << FShft(LMPWRSTAT_MC_PWR_CNT)) /* Self-refresh */
+#define LMPWRSTAT_MC_PWR_DPD	((0x3) << FShft(LMPWRSTAT_MC_PWR_CNT)) /* deep power down */
+
+/* LMTYPE - Local Memory (SDRAM) Type Register */
+#define LMTYPE_CASLAT	Fld(3,10)
+#define LMTYPE_CASLAT_1	((0x1) << FShft(LMTYPE_CASLAT))
+#define LMTYPE_CASLAT_2	((0x2) << FShft(LMTYPE_CASLAT))
+#define LMTYPE_CASLAT_3	((0x3) << FShft(LMTYPE_CASLAT))
+#define LMTYPE_BKSZ	Fld(2,8)
+#define LMTYPE_BKSZ_1	((0x1) << FShft(LMTYPE_BKSZ))
+#define LMTYPE_BKSZ_2	((0x2) << FShft(LMTYPE_BKSZ))
+#define LMTYPE_ROWSZ	Fld(4,4)
+#define LMTYPE_ROWSZ_11	((0xb) << FShft(LMTYPE_ROWSZ))
+#define LMTYPE_ROWSZ_12	((0xc) << FShft(LMTYPE_ROWSZ))
+#define LMTYPE_ROWSZ_13	((0xd) << FShft(LMTYPE_ROWSZ))
+#define LMTYPE_COLSZ	Fld(4,0)
+#define LMTYPE_COLSZ_7	((0x7) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_8	((0x8) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_9	((0x9) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_10	((0xa) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_11	((0xb) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_12	((0xc) << FShft(LMTYPE_COLSZ))
+
+/* LMTIM - Local Memory (SDRAM) Timing Register */
+#define LMTIM_TRAS	Fld(4,16)
+#define Lmtim_Tras(x)	((x) << FShft(LMTIM_TRAS))
+#define LMTIM_TRP	Fld(4,12)
+#define Lmtim_Trp(x)	((x) << FShft(LMTIM_TRP))
+#define LMTIM_TRCD	Fld(4,8)
+#define Lmtim_Trcd(x)	((x) << FShft(LMTIM_TRCD))
+#define LMTIM_TRC	Fld(4,4)
+#define Lmtim_Trc(x)	((x) << FShft(LMTIM_TRC))
+#define LMTIM_TDPL	Fld(4,0)
+#define Lmtim_Tdpl(x)	((x) << FShft(LMTIM_TDPL))
+
+/* LMREFRESH - Local Memory (SDRAM) tREF Control Register */
+#define LMREFRESH_TREF	Fld(2,0)
+#define Lmrefresh_Tref(x)	((x) << FShft(LMREFRESH_TREF))
+
+/* GSCTRL - Graphics surface control register */
+#define GSCTRL_LUT_EN	(1 << 31)
+#define GSCTRL_GPIXFMT	Fld(4,27)
+#define GSCTRL_GPIXFMT_INDEXED	((0x0) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_ARGB4444	((0x4) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_ARGB1555	((0x5) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_RGB888	((0x6) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_RGB565	((0x7) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_ARGB8888	((0x8) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GAMMA_EN	(1 << 26)
+
+#define GSCTRL_GSWIDTH Fld(11,11)
+#define Gsctrl_Width(Pixel)	/* Display Width [1..2048 pix.]  */ \
+                        (((Pixel) - 1) << FShft(GSCTRL_GSWIDTH))
+
+#define GSCTRL_GSHEIGHT Fld(11,0)
+#define Gsctrl_Height(Pixel)	/* Display Height [1..2048 pix.]  */ \
+                        (((Pixel) - 1) << FShft(GSCTRL_GSHEIGHT))
+
+/* GBBASE fileds */
+#define GBBASE_GLALPHA Fld(8,24)
+#define Gbbase_Glalpha(x)	((x) << FShft(GBBASE_GLALPHA))
+
+#define GBBASE_COLKEY Fld(24,0)
+#define Gbbase_Colkey(x)	((x) << FShft(GBBASE_COLKEY))
+
+/* GDRCTRL fields */
+#define GDRCTRL_PIXDBL	(1 << 31)
+#define GDRCTRL_PIXHLV	(1 << 30)
+#define GDRCTRL_LNDBL	(1 << 29)
+#define GDRCTRL_LNHLV	(1 << 28)
+#define GDRCTRL_COLKEYM	Fld(24,0)
+#define Gdrctrl_Colkeym(x)	((x) << FShft(GDRCTRL_COLKEYM))
+
+/* GSCADR graphics stream control address register fields */
+#define GSCADR_STR_EN	(1 << 31)
+#define GSCADR_COLKEY_EN	(1 << 30)
+#define GSCADR_COLKEYSCR	(1 << 29)
+#define GSCADR_BLEND_M	Fld(2,27)
+#define GSCADR_BLEND_NONE	((0x0) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_INV	((0x1) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_GLOB	((0x2) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_PIX	((0x3) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_POS	Fld(2,24)
+#define GSCADR_BLEND_GFX	((0x0) << FShft(GSCADR_BLEND_POS))
+#define GSCADR_BLEND_VID	((0x1) << FShft(GSCADR_BLEND_POS))
+#define GSCADR_BLEND_CUR	((0x2) << FShft(GSCADR_BLEND_POS))
+#define GSCADR_GBASE_ADR	Fld(23,0)
+#define Gscadr_Gbase_Adr(x)	((x) << FShft(GSCADR_GBASE_ADR))
+
+/* GSADR graphics stride address register fields */
+#define GSADR_SRCSTRIDE	Fld(10,22)
+#define Gsadr_Srcstride(x)	((x) << FShft(GSADR_SRCSTRIDE))
+#define GSADR_XSTART	Fld(11,11)
+#define Gsadr_Xstart(x)		((x) << FShft(GSADR_XSTART))
+#define GSADR_YSTART	Fld(11,0)
+#define Gsadr_Ystart(y)		((y) << FShft(GSADR_YSTART))
+
+/* GPLUT graphics palette register fields */
+#define GPLUT_LUTADR	Fld(8,24)
+#define Gplut_Lutadr(x)	((x) << FShft(GPLUT_LUTADR))
+#define GPLUT_LUTDATA	Fld(24,0)
+#define Gplut_Lutdata(x)	((x) << FShft(GPLUT_LUTDATA))
+
+/* HCCTRL - Hardware Cursor Register fields */
+#define HCCTRL_CUR_EN	(1 << 31)
+#define HCCTRL_COLKEY_EN	(1 << 29)
+#define HCCTRL_COLKEYSRC	(1 << 28)
+#define HCCTRL_BLEND_M	Fld(2,26)
+#define HCCTRL_BLEND_NONE	((0x0) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_BLEND_INV	((0x1) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_BLEND_GLOB	((0x2) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_BLEND_PIX	((0x3) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_CPIXFMT	Fld(3,23)
+#define HCCTRL_CPIXFMT_RGB332	((0x3) << FShft(HCCTRL_CPIXFMT))
+#define HCCTRL_CPIXFMT_ARGB4444	((0x4) << FShft(HCCTRL_CPIXFMT))
+#define HCCTRL_CPIXFMT_ARGB1555	((0x5) << FShft(HCCTRL_CPIXFMT))
+#define HCCTRL_CBASE_ADR	Fld(23,0)
+#define Hcctrl_Cbase_Adr(x)	((x) << FShft(HCCTRL_CBASE_ADR))
+
+/* HCSIZE Hardware Cursor Size Register fields */
+#define HCSIZE_BLEND_POS	Fld(2,29)
+#define HCSIZE_BLEND_GFX	((0x0) << FShft(HCSIZE_BLEND_POS))
+#define HCSIZE_BLEND_VID	((0x1) << FShft(HCSIZE_BLEND_POS))
+#define HCSIZE_BLEND_CUR	((0x2) << FShft(HCSIZE_BLEND_POS))
+#define HCSIZE_CWIDTH	Fld(3,16)
+#define Hcsize_Cwidth(x)	((x) << FShft(HCSIZE_CWIDTH))
+#define HCSIZE_CHEIGHT	Fld(3,0)
+#define Hcsize_Cheight(x)	((x) << FShft(HCSIZE_CHEIGHT))
+
+/* HCPOS Hardware Cursor Position Register fields */
+#define HCPOS_SWITCHSRC	(1 << 30)
+#define HCPOS_CURBLINK	Fld(6,24)
+#define Hcpos_Curblink(x)	((x) << FShft(HCPOS_CURBLINK))
+#define HCPOS_XSTART	Fld(12,12)
+#define Hcpos_Xstart(x)	((x) << FShft(HCPOS_XSTART))
+#define HCPOS_YSTART	Fld(12,0)
+#define Hcpos_Ystart(y)	((y) << FShft(HCPOS_YSTART))
+
+/* HCBADR Hardware Cursor Blend Address Register */
+#define HCBADR_GLALPHA	Fld(8,24)
+#define Hcbadr_Glalpha(x)	((x) << FShft(HCBADR_GLALPHA))
+#define HCBADR_COLKEY	Fld(24,0)
+#define Hcbadr_Colkey(x)	((x) << FShft(HCBADR_COLKEY))
+
+/* HCCKMSK - Hardware Cursor Color Key Mask Register */
+#define HCCKMSK_COLKEY_M	Fld(24,0)
+#define Hcckmsk_Colkey_M(x)	((x) << FShft(HCCKMSK_COLKEY_M))
+
+/* DSCTRL - Display sync control register */
+#define DSCTRL_SYNCGEN_EN	(1 << 31)
+#define DSCTRL_DPL_RST		(1 << 29)
+#define DSCTRL_PWRDN_M		(1 << 28)
+#define DSCTRL_UPDSYNCCNT	(1 << 26)
+#define DSCTRL_UPDINTCNT	(1 << 25)
+#define DSCTRL_UPDCNT		(1 << 24)
+#define DSCTRL_UPDWAIT	Fld(4,16)
+#define Dsctrl_Updwait(x)	((x) << FShft(DSCTRL_UPDWAIT))
+#define DSCTRL_CLKPOL		(1 << 11)
+#define DSCTRL_CSYNC_EN		(1 << 10)
+#define DSCTRL_VS_SLAVE		(1 << 7)
+#define DSCTRL_HS_SLAVE		(1 << 6)
+#define DSCTRL_BLNK_POL		(1 << 5)
+#define DSCTRL_BLNK_DIS		(1 << 4)
+#define DSCTRL_VS_POL		(1 << 3)
+#define DSCTRL_VS_DIS		(1 << 2)
+#define DSCTRL_HS_POL		(1 << 1)
+#define DSCTRL_HS_DIS		(1 << 0)
+
+/* DHT01 - Display horizontal timing register 01 */
+#define DHT01_HBPS	Fld(12,16)
+#define Dht01_Hbps(x)	((x) << FShft(DHT01_HBPS))
+#define DHT01_HT	Fld(12,0)
+#define Dht01_Ht(x)	((x) << FShft(DHT01_HT))
+
+/* DHT02 - Display horizontal timing register 02 */
+#define DHT02_HAS	Fld(12,16)
+#define Dht02_Has(x)	((x) << FShft(DHT02_HAS))
+#define DHT02_HLBS	Fld(12,0)
+#define Dht02_Hlbs(x)	((x) << FShft(DHT02_HLBS))
+
+/* DHT03 - Display horizontal timing register 03 */
+#define DHT03_HFPS	Fld(12,16)
+#define Dht03_Hfps(x)	((x) << FShft(DHT03_HFPS))
+#define DHT03_HRBS	Fld(12,0)
+#define Dht03_Hrbs(x)	((x) << FShft(DHT03_HRBS))
+
+/* DVT01 - Display vertical timing register 01 */
+#define DVT01_VBPS	Fld(12,16)
+#define Dvt01_Vbps(x)	((x) << FShft(DVT01_VBPS))
+#define DVT01_VT	Fld(12,0)
+#define Dvt01_Vt(x)	((x) << FShft(DVT01_VT))
+
+/* DVT02 - Display vertical timing register 02 */
+#define DVT02_VAS	Fld(12,16)
+#define Dvt02_Vas(x)	((x) << FShft(DVT02_VAS))
+#define DVT02_VTBS	Fld(12,0)
+#define Dvt02_Vtbs(x)	((x) << FShft(DVT02_VTBS))
+
+/* DVT03 - Display vertical timing register 03 */
+#define DVT03_VFPS	Fld(12,16)
+#define Dvt03_Vfps(x)	((x) << FShft(DVT03_VFPS))
+#define DVT03_VBBS	Fld(12,0)
+#define Dvt03_Vbbs(x)	((x) << FShft(DVT03_VBBS))
+
+/* DVECTRL - display vertical event control register */
+#define DVECTRL_VEVENT	Fld(12,16)
+#define Dvectrl_Vevent(x)	((x) << FShft(DVECTRL_VEVENT))
+#define DVECTRL_VFETCH	Fld(12,0)
+#define Dvectrl_Vfetch(x)	((x) << FShft(DVECTRL_VFETCH))
+
+/* DHDET - display horizontal DE timing register */
+#define DHDET_HDES	Fld(12,16)
+#define Dhdet_Hdes(x)	((x) << FShft(DHDET_HDES))
+#define DHDET_HDEF	Fld(12,0)
+#define Dhdet_Hdef(x)	((x) << FShft(DHDET_HDEF))
+
+/* DVDET - display vertical DE timing register */
+#define DVDET_VDES	Fld(12,16)
+#define Dvdet_Vdes(x)	((x) << FShft(DVDET_VDES))
+#define DVDET_VDEF	Fld(12,0)
+#define Dvdet_Vdef(x)	((x) << FShft(DVDET_VDEF))
+
+/* DODMSK - display output data mask register */
+#define DODMSK_MASK_LVL	(1 << 31)
+#define DODMSK_BLNK_LVL	(1 << 30)
+#define DODMSK_MASK_B	Fld(8,16)
+#define Dodmsk_Mask_B(x)	((x) << FShft(DODMSK_MASK_B))
+#define DODMSK_MASK_G	Fld(8,8)
+#define Dodmsk_Mask_G(x)	((x) << FShft(DODMSK_MASK_G))
+#define DODMSK_MASK_R	Fld(8,0)
+#define Dodmsk_Mask_R(x)	((x) << FShft(DODMSK_MASK_R))
+
+/* DBCOL - display border color control register */
+#define DBCOL_BORDCOL	Fld(24,0)
+#define Dbcol_Bordcol(x)	((x) << FShft(DBCOL_BORDCOL))
+
+/* DVLNUM - display vertical line number register */
+#define DVLNUM_VLINE	Fld(12,0)
+#define Dvlnum_Vline(x)	((x) << FShft(DVLNUM_VLINE))
+
+/* DMCTRL - Display Memory Control Register */
+#define DMCTRL_MEM_REF	Fld(2,30)
+#define DMCTRL_MEM_REF_ACT	((0x0) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_MEM_REF_HB	((0x1) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_MEM_REF_VB	((0x2) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_MEM_REF_BOTH	((0x3) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_UV_THRHLD	Fld(6,24)
+#define Dmctrl_Uv_Thrhld(x)	((x) << FShft(DMCTRL_UV_THRHLD))
+#define DMCTRL_V_THRHLD		Fld(7,16)
+#define Dmctrl_V_Thrhld(x)	((x) << FShft(DMCTRL_V_THRHLD))
+#define DMCTRL_D_THRHLD		Fld(7,8)
+#define Dmctrl_D_Thrhld(x)	((x) << FShft(DMCTRL_D_THRHLD))
+#define DMCTRL_BURSTLEN	Fld(6,0)
+#define Dmctrl_Burstlen(x)	((x) << FShft(DMCTRL_BURSTLEN))
+
+
+/* DLSTS - display load status register */
+#define DLSTS_RLD_ADONE	(1 << 23)
+/* #define DLSTS_RLD_ADOUT	Fld(23,0) */
+
+/* DLLCTRL - display list load control register */
+#define DLLCTRL_RLD_ADRLN	Fld(8,24)
+#define Dllctrl_Rld_Adrln(x)	((x) << FShft(DLLCTRL_RLD_ADRLN))
+
+/* SPOCTRL - Scale Pitch/Order Control Register */
+#define SPOCTRL_H_SC_BP		(1 << 31)
+#define SPOCTRL_V_SC_BP		(1 << 30)
+#define SPOCTRL_HV_SC_OR	(1 << 29)
+#define SPOCTRL_VS_UR_C		(1 << 27)
+#define SPOCTRL_VORDER	Fld(2,16)
+#define SPOCTRL_VORDER_1TAP	((0x0) << FShft(SPOCTRL_VORDER))
+#define SPOCTRL_VORDER_2TAP	((0x1) << FShft(SPOCTRL_VORDER))
+#define SPOCTRL_VORDER_4TAP	((0x3) << FShft(SPOCTRL_VORDER))
+#define SPOCTRL_VPITCH	Fld(16,0)
+#define Spoctrl_Vpitch(x)	((x) << FShft(SPOCTRL_VPITCH))
+
+#endif /* __REG_BITS_2700G_ */
diff --git a/drivers/video/mbx/regs.h b/drivers/video/mbx/regs.h
new file mode 100644
index 0000000..ad20be0
--- /dev/null
+++ b/drivers/video/mbx/regs.h
@@ -0,0 +1,195 @@
+#ifndef __REGS_2700G_
+#define __REGS_2700G_
+
+/* extern unsigned long virt_base_2700; */
+/* #define __REG_2700G(x)	(*(volatile unsigned long*)((x)+virt_base_2700)) */
+#define __REG_2700G(x)	((x)+virt_base_2700)
+
+/* System Configuration Registers (0x0000_0000  0x0000_0010) */
+#define SYSCFG		__REG_2700G(0x00000000)
+#define PFBASE		__REG_2700G(0x00000004)
+#define PFCEIL		__REG_2700G(0x00000008)
+#define POLLFLAG	__REG_2700G(0x0000000c)
+#define SYSRST		__REG_2700G(0x00000010)
+
+/* Interrupt Control Registers (0x0000_0014  0x0000_002F) */
+#define NINTPW		__REG_2700G(0x00000014)
+#define MINTENABLE	__REG_2700G(0x00000018)
+#define MINTSTAT	__REG_2700G(0x0000001c)
+#define SINTENABLE	__REG_2700G(0x00000020)
+#define SINTSTAT	__REG_2700G(0x00000024)
+#define SINTCLR		__REG_2700G(0x00000028)
+
+/* Clock Control Registers (0x0000_002C  0x0000_005F) */
+#define SYSCLKSRC	__REG_2700G(0x0000002c)
+#define PIXCLKSRC	__REG_2700G(0x00000030)
+#define CLKSLEEP	__REG_2700G(0x00000034)
+#define COREPLL		__REG_2700G(0x00000038)
+#define DISPPLL		__REG_2700G(0x0000003c)
+#define PLLSTAT		__REG_2700G(0x00000040)
+#define VOVRCLK		__REG_2700G(0x00000044)
+#define PIXCLK		__REG_2700G(0x00000048)
+#define MEMCLK		__REG_2700G(0x0000004c)
+#define M24CLK		__REG_2700G(0x00000054)
+#define MBXCLK		__REG_2700G(0x00000054)
+#define SDCLK		__REG_2700G(0x00000058)
+#define PIXCLKDIV	__REG_2700G(0x0000005c)
+
+/* LCD Port Control Register (0x0000_0060  0x0000_006F) */
+#define LCD_CONFIG	__REG_2700G(0x00000060)
+
+/* On-Die Frame Buffer Registers (0x0000_0064  0x0000_006B) */
+#define ODFBPWR		__REG_2700G(0x00000064)
+#define ODFBSTAT	__REG_2700G(0x00000068)
+
+/* GPIO Registers (0x0000_006C  0x0000_007F) */
+#define GPIOCGF		__REG_2700G(0x0000006c)
+#define GPIOHI		__REG_2700G(0x00000070)
+#define GPIOLO		__REG_2700G(0x00000074)
+#define GPIOSTAT	__REG_2700G(0x00000078)
+
+/* Pulse Width Modulator (PWM) Registers (0x0000_0200  0x0000_02FF) */
+#define PWMRST		__REG_2700G(0x00000200)
+#define PWMCFG		__REG_2700G(0x00000204)
+#define PWM0DIV		__REG_2700G(0x00000210)
+#define PWM0DUTY	__REG_2700G(0x00000214)
+#define PWM0PER		__REG_2700G(0x00000218)
+#define PWM1DIV		__REG_2700G(0x00000220)
+#define PWM1DUTY	__REG_2700G(0x00000224)
+#define PWM1PER		__REG_2700G(0x00000228)
+
+/* Identification (ID) Registers (0x0000_0300  0x0000_0FFF) */
+#define ID		__REG_2700G(0x00000FF0)
+
+/* Local Memory (SDRAM) Interface Registers (0x0000_1000  0x0000_1FFF) */
+#define LMRST		__REG_2700G(0x00001000)
+#define LMCFG		__REG_2700G(0x00001004)
+#define LMPWR		__REG_2700G(0x00001008)
+#define LMPWRSTAT	__REG_2700G(0x0000100c)
+#define LMCEMR		__REG_2700G(0x00001010)
+#define LMTYPE		__REG_2700G(0x00001014)
+#define LMTIM		__REG_2700G(0x00001018)
+#define LMREFRESH	__REG_2700G(0x0000101c)
+#define LMPROTMIN	__REG_2700G(0x00001020)
+#define LMPROTMAX	__REG_2700G(0x00001024)
+#define LMPROTCFG	__REG_2700G(0x00001028)
+#define LMPROTERR	__REG_2700G(0x0000102c)
+
+/* Plane Controller Registers (0x0000_2000  0x0000_2FFF) */
+#define GSCTRL		__REG_2700G(0x00002000)
+#define VSCTRL		__REG_2700G(0x00002004)
+#define GBBASE		__REG_2700G(0x00002020)
+#define VBBASE		__REG_2700G(0x00002024)
+#define GDRCTRL		__REG_2700G(0x00002040)
+#define VCMSK		__REG_2700G(0x00002044)
+#define GSCADR		__REG_2700G(0x00002060)
+#define VSCADR		__REG_2700G(0x00002064)
+#define VUBASE		__REG_2700G(0x00002084)
+#define VVBASE		__REG_2700G(0x000020a4)
+#define GSADR		__REG_2700G(0x000020c0)
+#define VSADR		__REG_2700G(0x000020c4)
+#define HCCTRL		__REG_2700G(0x00002100)
+#define HCSIZE		__REG_2700G(0x00002110)
+#define HCPOS		__REG_2700G(0x00002120)
+#define HCBADR		__REG_2700G(0x00002130)
+#define HCCKMSK		__REG_2700G(0x00002140)
+#define GPLUT		__REG_2700G(0x00002150)
+#define DSCTRL		__REG_2700G(0x00002154)
+#define DHT01		__REG_2700G(0x00002158)
+#define DHT02		__REG_2700G(0x0000215c)
+#define DHT03		__REG_2700G(0x00002160)
+#define DVT01		__REG_2700G(0x00002164)
+#define DVT02		__REG_2700G(0x00002168)
+#define DVT03		__REG_2700G(0x0000216c)
+#define DBCOL		__REG_2700G(0x00002170)
+#define BGCOLOR		__REG_2700G(0x00002174)
+#define DINTRS		__REG_2700G(0x00002178)
+#define DINTRE		__REG_2700G(0x0000217c)
+#define DINTRCNT	__REG_2700G(0x00002180)
+#define DSIG		__REG_2700G(0x00002184)
+#define DMCTRL		__REG_2700G(0x00002188)
+#define CLIPCTRL	__REG_2700G(0x0000218c)
+#define SPOCTRL		__REG_2700G(0x00002190)
+#define SVCTRL		__REG_2700G(0x00002194)
+
+/* 0x0000_2198 */
+/* 0x0000_21A8 VSCOEFF[0:4] Video Scalar Vertical Coefficient [0:4] 4.14.5 */
+#define VSCOEFF0	__REG_2700G(0x00002198)
+#define VSCOEFF1	__REG_2700G(0x0000219c)
+#define VSCOEFF2	__REG_2700G(0x000021a0)
+#define VSCOEFF3	__REG_2700G(0x000021a4)
+#define VSCOEFF4	__REG_2700G(0x000021a8)
+
+#define SHCTRL		__REG_2700G(0x000021b0)
+
+/* 0x0000_21B4 */
+/* 0x0000_21D4 HSCOEFF[0:8] Video Scalar Horizontal Coefficient [0:8] 4.14.7 */
+#define HSCOEFF0	__REG_2700G(0x000021b4)
+#define HSCOEFF1	__REG_2700G(0x000021b8)
+#define HSCOEFF2	__REG_2700G(0x000021bc)
+#define HSCOEFF3	__REG_2700G(0x000021b0)
+#define HSCOEFF4	__REG_2700G(0x000021c4)
+#define HSCOEFF5	__REG_2700G(0x000021c8)
+#define HSCOEFF6	__REG_2700G(0x000021cc)
+#define HSCOEFF7	__REG_2700G(0x000021d0)
+#define HSCOEFF8	__REG_2700G(0x000021d4)
+
+#define SSSIZE		__REG_2700G(0x000021D8)
+
+/* 0x0000_2200 */
+/* 0x0000_2240 VIDGAM[0:16] Video Gamma LUT Index [0:16] 4.15.2 */
+#define VIDGAM0		__REG_2700G(0x00002200)
+#define VIDGAM1		__REG_2700G(0x00002204)
+#define VIDGAM2		__REG_2700G(0x00002208)
+#define VIDGAM3		__REG_2700G(0x0000220c)
+#define VIDGAM4		__REG_2700G(0x00002210)
+#define VIDGAM5		__REG_2700G(0x00002214)
+#define VIDGAM6		__REG_2700G(0x00002218)
+#define VIDGAM7		__REG_2700G(0x0000221c)
+#define VIDGAM8		__REG_2700G(0x00002220)
+#define VIDGAM9		__REG_2700G(0x00002224)
+#define VIDGAM10	__REG_2700G(0x00002228)
+#define VIDGAM11	__REG_2700G(0x0000222c)
+#define VIDGAM12	__REG_2700G(0x00002230)
+#define VIDGAM13	__REG_2700G(0x00002234)
+#define VIDGAM14	__REG_2700G(0x00002238)
+#define VIDGAM15	__REG_2700G(0x0000223c)
+#define VIDGAM16	__REG_2700G(0x00002240)
+
+/* 0x0000_2250 */
+/* 0x0000_2290 GFXGAM[0:16] Graphics Gamma LUT Index [0:16] 4.15.3 */
+#define GFXGAM0		__REG_2700G(0x00002250)
+#define GFXGAM1		__REG_2700G(0x00002254)
+#define GFXGAM2		__REG_2700G(0x00002258)
+#define GFXGAM3		__REG_2700G(0x0000225c)
+#define GFXGAM4		__REG_2700G(0x00002260)
+#define GFXGAM5		__REG_2700G(0x00002264)
+#define GFXGAM6		__REG_2700G(0x00002268)
+#define GFXGAM7		__REG_2700G(0x0000226c)
+#define GFXGAM8		__REG_2700G(0x00002270)
+#define GFXGAM9		__REG_2700G(0x00002274)
+#define GFXGAM10	__REG_2700G(0x00002278)
+#define GFXGAM11	__REG_2700G(0x0000227c)
+#define GFXGAM12	__REG_2700G(0x00002280)
+#define GFXGAM13	__REG_2700G(0x00002284)
+#define GFXGAM14	__REG_2700G(0x00002288)
+#define GFXGAM15	__REG_2700G(0x0000228c)
+#define GFXGAM16	__REG_2700G(0x00002290)
+
+#define DLSTS		__REG_2700G(0x00002300)
+#define DLLCTRL		__REG_2700G(0x00002304)
+#define DVLNUM		__REG_2700G(0x00002308)
+#define DUCTRL		__REG_2700G(0x0000230c)
+#define DVECTRL		__REG_2700G(0x00002310)
+#define DHDET		__REG_2700G(0x00002314)
+#define DVDET		__REG_2700G(0x00002318)
+#define DODMSK		__REG_2700G(0x0000231c)
+#define CSC01		__REG_2700G(0x00002330)
+#define CSC02		__REG_2700G(0x00002334)
+#define CSC03		__REG_2700G(0x00002338)
+#define CSC04		__REG_2700G(0x0000233c)
+#define CSC05		__REG_2700G(0x00002340)
+
+#define FB_MEMORY_START	__REG_2700G(0x00060000)
+
+#endif /* __REGS_2700G_ */
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index ff54546..d126790 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -12,7 +12,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/tty.h>
 #include <linux/fb.h>
 #include <linux/sched.h>
 
diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c
index 773855a..59a6f5f 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/neofb.c
@@ -59,7 +59,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/nvidia/nv_backlight.c
index 1c1c10c..b45f577 100644
--- a/drivers/video/nvidia/nv_backlight.c
+++ b/drivers/video/nvidia/nv_backlight.c
@@ -26,9 +26,11 @@
  */
 #define MIN_LEVEL 0x158
 #define MAX_LEVEL 0x534
+#define LEVEL_STEP ((MAX_LEVEL - MIN_LEVEL) / FB_BACKLIGHT_MAX)
 
 static struct backlight_properties nvidia_bl_data;
 
+/* Call with fb_info->bl_mutex held */
 static int nvidia_bl_get_level_brightness(struct nvidia_par *par,
 		int level)
 {
@@ -36,9 +38,7 @@ static int nvidia_bl_get_level_brightness(struct nvidia_par *par,
 	int nlevel;
 
 	/* Get and convert the value */
-	mutex_lock(&info->bl_mutex);
-	nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
-	mutex_unlock(&info->bl_mutex);
+	nlevel = MIN_LEVEL + info->bl_curve[level] * LEVEL_STEP;
 
 	if (nlevel < 0)
 		nlevel = 0;
@@ -50,7 +50,8 @@ static int nvidia_bl_get_level_brightness(struct nvidia_par *par,
 	return nlevel;
 }
 
-static int nvidia_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __nvidia_bl_update_status(struct backlight_device *bd)
 {
 	struct nvidia_par *par = class_get_devdata(&bd->class_dev);
 	u32 tmp_pcrt, tmp_pmc, fpcontrol;
@@ -84,6 +85,19 @@ static int nvidia_bl_update_status(struct backlight_device *bd)
 	return 0;
 }
 
+static int nvidia_bl_update_status(struct backlight_device *bd)
+{
+	struct nvidia_par *par = class_get_devdata(&bd->class_dev);
+	struct fb_info *info = pci_get_drvdata(par->pci_dev);
+	int ret;
+
+	mutex_lock(&info->bl_mutex);
+	ret = __nvidia_bl_update_status(bd);
+	mutex_unlock(&info->bl_mutex);
+
+	return ret;
+}
+
 static int nvidia_bl_get_brightness(struct backlight_device *bd)
 {
 	return bd->props->brightness;
@@ -96,6 +110,16 @@ static struct backlight_properties nvidia_bl_data = {
 	.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
 };
 
+void nvidia_bl_set_power(struct fb_info *info, int power)
+{
+	mutex_lock(&info->bl_mutex);
+	up(&info->bl_dev->sem);
+	info->bl_dev->props->power = power;
+	__nvidia_bl_update_status(info->bl_dev);
+	down(&info->bl_dev->sem);
+	mutex_unlock(&info->bl_mutex);
+}
+
 void nvidia_bl_init(struct nvidia_par *par)
 {
 	struct fb_info *info = pci_get_drvdata(par->pci_dev);
diff --git a/drivers/video/nvidia/nv_proto.h b/drivers/video/nvidia/nv_proto.h
index 6fba656..8612710 100644
--- a/drivers/video/nvidia/nv_proto.h
+++ b/drivers/video/nvidia/nv_proto.h
@@ -68,9 +68,11 @@ extern u8 byte_rev[256];
 #ifdef CONFIG_FB_NVIDIA_BACKLIGHT
 extern void nvidia_bl_init(struct nvidia_par *par);
 extern void nvidia_bl_exit(struct nvidia_par *par);
+extern void nvidia_bl_set_power(struct fb_info *info, int power);
 #else
 static inline void nvidia_bl_init(struct nvidia_par *par) {}
 static inline void nvidia_bl_exit(struct nvidia_par *par) {}
+static inline void nvidia_bl_set_power(struct fb_info *info, int power) {}
 #endif
 
 #endif				/* __NV_PROTO_H__ */
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
index b02d603..9f2066f 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -14,7 +14,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
@@ -933,16 +932,7 @@ static int nvidiafb_blank(int blank, struct fb_info *info)
 	NVWriteSeq(par, 0x01, tmp);
 	NVWriteCrtc(par, 0x1a, vesa);
 
-#ifdef CONFIG_FB_NVIDIA_BACKLIGHT
-	mutex_lock(&info->bl_mutex);
-	if (info->bl_dev) {
-		down(&info->bl_dev->sem);
-		info->bl_dev->props->power = blank;
-		info->bl_dev->props->update_status(info->bl_dev);
-		up(&info->bl_dev->sem);
-	}
-	mutex_unlock(&info->bl_mutex);
-#endif
+	nvidia_bl_set_power(info, blank);
 
 	NVTRACE_LEAVE();
 
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index 71ce1fa..ce5f303 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -17,7 +17,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index 450e802..983be3e 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -22,7 +22,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 49a203e..a560a22 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -33,7 +33,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/pm3fb.c b/drivers/video/pm3fb.c
index 0e0f977..1d81ef4 100644
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/pm3fb.c
@@ -57,7 +57,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/pmag-aa-fb.c b/drivers/video/pmag-aa-fb.c
index d92f352..68ca3cc 100644
--- a/drivers/video/pmag-aa-fb.c
+++ b/drivers/video/pmag-aa-fb.c
@@ -29,7 +29,6 @@
 #include <linux/string.h>
 #include <linux/timer.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index 4a1e0e8..940ba2b 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -53,7 +53,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/video/q40fb.c b/drivers/video/q40fb.c
index fc91dbf..48536c3 100644
--- a/drivers/video/q40fb.c
+++ b/drivers/video/q40fb.c
@@ -14,7 +14,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/video/retz3fb.c b/drivers/video/retz3fb.c
index 5e2c64f..cf41ff1 100644
--- a/drivers/video/retz3fb.c
+++ b/drivers/video/retz3fb.c
@@ -25,7 +25,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c
index 2788655..33dddba 100644
--- a/drivers/video/riva/fbdev.c
+++ b/drivers/video/riva/fbdev.c
@@ -34,7 +34,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
@@ -278,9 +277,11 @@ static const struct riva_regs reg_template = {
  */
 #define MIN_LEVEL 0x158
 #define MAX_LEVEL 0x534
+#define LEVEL_STEP ((MAX_LEVEL - MIN_LEVEL) / FB_BACKLIGHT_MAX)
 
 static struct backlight_properties riva_bl_data;
 
+/* Call with fb_info->bl_mutex held */
 static int riva_bl_get_level_brightness(struct riva_par *par,
 		int level)
 {
@@ -288,9 +289,7 @@ static int riva_bl_get_level_brightness(struct riva_par *par,
 	int nlevel;
 
 	/* Get and convert the value */
-	mutex_lock(&info->bl_mutex);
-	nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
-	mutex_unlock(&info->bl_mutex);
+	nlevel = MIN_LEVEL + info->bl_curve[level] * LEVEL_STEP;
 
 	if (nlevel < 0)
 		nlevel = 0;
@@ -302,7 +301,8 @@ static int riva_bl_get_level_brightness(struct riva_par *par,
 	return nlevel;
 }
 
-static int riva_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __riva_bl_update_status(struct backlight_device *bd)
 {
 	struct riva_par *par = class_get_devdata(&bd->class_dev);
 	U032 tmp_pcrt, tmp_pmc;
@@ -327,6 +327,19 @@ static int riva_bl_update_status(struct backlight_device *bd)
 	return 0;
 }
 
+static int riva_bl_update_status(struct backlight_device *bd)
+{
+	struct riva_par *par = class_get_devdata(&bd->class_dev);
+	struct fb_info *info = pci_get_drvdata(par->pdev);
+	int ret;
+
+	mutex_lock(&info->bl_mutex);
+	ret = __riva_bl_update_status(bd);
+	mutex_unlock(&info->bl_mutex);
+
+	return ret;
+}
+
 static int riva_bl_get_brightness(struct backlight_device *bd)
 {
 	return bd->props->brightness;
@@ -339,6 +352,16 @@ static struct backlight_properties riva_bl_data = {
 	.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
 };
 
+static void riva_bl_set_power(struct fb_info *info, int power)
+{
+	mutex_lock(&info->bl_mutex);
+	up(&info->bl_dev->sem);
+	info->bl_dev->props->power = power;
+	__riva_bl_update_status(info->bl_dev);
+	down(&info->bl_dev->sem);
+	mutex_unlock(&info->bl_mutex);
+}
+
 static void riva_bl_init(struct riva_par *par)
 {
 	struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -419,6 +442,7 @@ static void riva_bl_exit(struct riva_par *par)
 #else
 static inline void riva_bl_init(struct riva_par *par) {}
 static inline void riva_bl_exit(struct riva_par *par) {}
+static inline void riva_bl_set_power(struct fb_info *info, int power) {}
 #endif /* CONFIG_FB_RIVA_BACKLIGHT */
 
 /* ------------------------------------------------------------------------- *
@@ -1337,16 +1361,7 @@ static int rivafb_blank(int blank, struct fb_info *info)
 	SEQout(par, 0x01, tmp);
 	CRTCout(par, 0x1a, vesa);
 
-#ifdef CONFIG_FB_RIVA_BACKLIGHT
-	mutex_lock(&info->bl_mutex);
-	if (info->bl_dev) {
-		down(&info->bl_dev->sem);
-		info->bl_dev->props->power = blank;
-		info->bl_dev->props->update_status(info->bl_dev);
-		up(&info->bl_dev->sem);
-	}
-	mutex_unlock(&info->bl_mutex);
-#endif
+	riva_bl_set_power(info, blank);
 
 	NVTRACE_LEAVE();
 
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index f461eb1..ad3bdd6 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -76,7 +76,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index 4729af4..461e094 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -46,7 +46,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index b848ca7..895ebda 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -44,7 +44,13 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
 #include <linux/tty.h>
+#else
+#include <linux/screen_info.h>
+#endif
+
 #include <linux/slab.h>
 #include <linux/fb.h>
 #include <linux/selection.h>
diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c
index 67f429e..bb96cb6 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/skeletonfb.c
@@ -47,7 +47,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff --git a/drivers/video/sun3fb.c b/drivers/video/sun3fb.c
index e046e20..f80356d 100644
--- a/drivers/video/sun3fb.c
+++ b/drivers/video/sun3fb.c
@@ -30,7 +30,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 239b149..689ce02 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -63,7 +63,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c
index 6c2c78a..94fde62 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/tgafb.c
@@ -17,7 +17,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff --git a/drivers/video/tx3912fb.c b/drivers/video/tx3912fb.c
index d904da4..07389ba 100644
--- a/drivers/video/tx3912fb.c
+++ b/drivers/video/tx3912fb.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
-#include <linux/tty.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
diff --git a/drivers/video/valkyriefb.c b/drivers/video/valkyriefb.c
index 1d76c03..47f2792 100644
--- a/drivers/video/valkyriefb.c
+++ b/drivers/video/valkyriefb.c
@@ -44,7 +44,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index 5718924..2196448 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -13,13 +13,13 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/screen_info.h>
 
 #include <video/vga.h>
 #include <asm/io.h>
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index d073ffb..a9b99b0 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -15,7 +15,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index 3c404c9..43d5a6d 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -15,13 +15,13 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/screen_info.h>
 
 #include <asm/io.h>
 #include <video/vga.h>
diff --git a/drivers/video/virgefb.c b/drivers/video/virgefb.c
index 5ea2345..6437895 100644
--- a/drivers/video/virgefb.c
+++ b/drivers/video/virgefb.c
@@ -39,7 +39,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/zorro.h>
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index af492cc..d93eb62 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -218,7 +218,7 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev)
 		do {
 			temp = i2c_smbus_read_byte(&pdev->client);
 		} while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) &&
-			 (++retries > DS2482_WAIT_IDLE_TIMEOUT));
+			 (++retries < DS2482_WAIT_IDLE_TIMEOUT));
 	}
 
 	if (retries > DS2482_WAIT_IDLE_TIMEOUT)
diff --git a/drivers/w1/w1_io.h b/drivers/w1/w1_io.h
deleted file mode 100644
index 9a76d2a..0000000
--- a/drivers/w1/w1_io.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *	w1_io.h
- *
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __W1_IO_H
-#define __W1_IO_H
-
-#include "w1.h"
-
-u8 w1_triplet(struct w1_master *dev, int bdir);
-void w1_write_8(struct w1_master *, u8);
-int w1_reset_bus(struct w1_master *);
-u8 w1_calc_crc8(u8 *, int);
-void w1_write_block(struct w1_master *, const u8 *, int);
-u8 w1_read_block(struct w1_master *, u8 *, int);
-void w1_search_devices(struct w1_master *dev, w1_slave_found_callback cb);
-int w1_reset_select_slave(struct w1_slave *sl);
-
-#endif /* __W1_IO_H */