summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorFrancois Romieu <romieu@fr.zoreil.com>2008-10-26 17:02:49 +0100
committerLinus Torvalds <torvalds@linux-foundation.org>2008-10-26 09:35:05 -0700
commite383d56487062275e9971094f2efcca34227ee60 (patch)
tree9e4523b27417f1572d9c33ae9012ee98c0dcb556 /drivers
parent1137fb670465b6b5d15b9db7d01707a5833ee3ae (diff)
downloadop-kernel-dev-e383d56487062275e9971094f2efcca34227ee60.zip
op-kernel-dev-e383d56487062275e9971094f2efcca34227ee60.tar.gz
r8169: revert "read MAC address from EEPROM on init"
This reverts commit 7bf6bf4803df1adc927f585168d2135fb019c698. The code has both a short existence and an increasing track of failures despite some work to amend it for -rc1. It is not just a matter of reading the eeprom: sometimes the eeprom is read correctly, then the mac address is not written correctly back into the mac registers. Some chipsets seem to work reliably but it is not clear at this point if the code can simply be made to work on a per-chipset basis and post -rc1 is not the place where I want to experiment these things. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/r8169.c88
1 files changed, 0 insertions, 88 deletions
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 2b4e975..4b7cb38 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1915,92 +1915,6 @@ static void rtl_disable_msi(struct pci_dev *pdev, struct rtl8169_private *tp)
}
}
-static int rtl_eeprom_read(struct pci_dev *pdev, int cap, int addr, __le32 *val)
-{
- int ret, count = 100;
- u16 status = 0;
- u32 value;
-
- ret = pci_write_config_word(pdev, cap + PCI_VPD_ADDR, addr);
- if (ret < 0)
- return ret;
-
- do {
- udelay(10);
- ret = pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &status);
- if (ret < 0)
- return ret;
- } while (!(status & PCI_VPD_ADDR_F) && --count);
-
- if (!(status & PCI_VPD_ADDR_F))
- return -ETIMEDOUT;
-
- ret = pci_read_config_dword(pdev, cap + PCI_VPD_DATA, &value);
- if (ret < 0)
- return ret;
-
- *val = cpu_to_le32(value);
-
- return 0;
-}
-
-static void rtl_init_mac_address(struct rtl8169_private *tp,
- void __iomem *ioaddr)
-{
- struct pci_dev *pdev = tp->pci_dev;
- int vpd_cap;
- __le32 sig;
- u8 mac[8];
- u8 cfg1;
-
- cfg1 = RTL_R8(Config1);
- if (!(cfg1 & VPD)) {
- if (netif_msg_probe(tp))
- dev_info(&pdev->dev, "VPD access disabled, enabling\n");
- RTL_W8(Cfg9346, Cfg9346_Unlock);
- RTL_W8(Config1, cfg1 | VPD);
- RTL_W8(Cfg9346, Cfg9346_Lock);
- }
-
- vpd_cap = pci_find_capability(pdev, PCI_CAP_ID_VPD);
- if (!vpd_cap)
- return;
-
- if (rtl_eeprom_read(pdev, vpd_cap, RTL_EEPROM_SIG_ADDR, &sig) < 0)
- return;
-
- if ((sig & RTL_EEPROM_SIG_MASK) != RTL_EEPROM_SIG) {
- dev_info(&pdev->dev, "Missing EEPROM signature: %08x\n", sig);
- return;
- }
-
- /*
- * MAC address is stored in EEPROM at offset 0x0e
- * Realtek says: "The VPD address does not have to be a DWORD-aligned
- * address as defined in the PCI 2.2 Specifications, but the VPD data
- * is always consecutive 4-byte data starting from the VPD address
- * specified."
- */
- if (rtl_eeprom_read(pdev, vpd_cap, 0x000e, (__le32*)&mac[0]) < 0 ||
- rtl_eeprom_read(pdev, vpd_cap, 0x0012, (__le32*)&mac[4]) < 0) {
- if (netif_msg_probe(tp)) {
- dev_warn(&pdev->dev,
- "reading MAC address from EEPROM failed\n");
- }
- return;
- }
-
- if (netif_msg_probe(tp)) {
- DECLARE_MAC_BUF(buf);
-
- dev_info(&pdev->dev, "MAC address found in EEPROM: %s\n",
- print_mac(buf, mac));
- }
-
- if (is_valid_ether_addr(mac))
- rtl_rar_set(tp, mac);
-}
-
static int __devinit
rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
@@ -2178,8 +2092,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
tp->mmio_addr = ioaddr;
- rtl_init_mac_address(tp, ioaddr);
-
/* Get MAC address */
for (i = 0; i < MAC_ADDR_LEN; i++)
dev->dev_addr[i] = RTL_R8(MAC0 + i);
OpenPOWER on IntegriCloud