summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorPaul Mackerras <paulus@samba.org>2006-02-28 16:35:24 +1100
committerPaul Mackerras <paulus@samba.org>2006-02-28 16:35:24 +1100
commit6749c5507388f3fc3719f57a54b540ee83f6661a (patch)
treec069f990f86b020a14b50759d0c75475eedde186 /drivers
parent2cf82c0256b198ae28c465f2c4d7c12c836ea5ea (diff)
parent56ec6462af9cba56a04439154e5768672d6f390f (diff)
downloadop-kernel-dev-6749c5507388f3fc3719f57a54b540ee83f6661a.zip
op-kernel-dev-6749c5507388f3fc3719f57a54b540ee83f6661a.tar.gz
Merge ../powerpc-merge
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/Kconfig10
-rw-r--r--drivers/char/sx.c22
-rw-r--r--drivers/ieee1394/sbp2.c116
-rw-r--r--drivers/ieee1394/sbp2.h64
-rw-r--r--drivers/md/dm.c8
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0001.c1
-rw-r--r--drivers/net/ifb.c2
-rw-r--r--drivers/net/r8169.c189
-rw-r--r--drivers/net/sis900.c4
-rw-r--r--drivers/net/skge.c75
-rw-r--r--drivers/net/skge.h1
-rw-r--r--drivers/net/sky2.c173
-rw-r--r--drivers/net/sky2.h83
-rw-r--r--drivers/net/tg3.c9
-rw-r--r--drivers/net/tlan.c2
-rw-r--r--drivers/scsi/libata-core.c4
-rw-r--r--drivers/scsi/libata-scsi.c2
-rw-r--r--drivers/scsi/libata.h1
-rw-r--r--drivers/scsi/sata_sil.c52
-rw-r--r--drivers/scsi/sd.c20
-rw-r--r--drivers/serial/8250.c6
-rw-r--r--drivers/video/Kconfig2
-rw-r--r--drivers/video/asiliantfb.c21
-rw-r--r--drivers/video/au1100fb.c3
-rw-r--r--drivers/video/console/vgacon.c67
-rw-r--r--drivers/video/gbefb.c3
26 files changed, 616 insertions, 324 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 0cce28c..33e2ca8 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -247,7 +247,7 @@ config ACPI_CUSTOM_DSDT_FILE
Enter the full path name to the file wich includes the AmlCode declaration.
config ACPI_BLACKLIST_YEAR
- int "Disable ACPI for systems before Jan 1st this year" if X86
+ int "Disable ACPI for systems before Jan 1st this year" if X86_32
default 0
help
enter a 4-digit year, eg. 2001 to disable ACPI by default
@@ -285,9 +285,8 @@ config ACPI_SYSTEM
dump your ACPI DSDT table using /proc/acpi/dsdt.
config X86_PM_TIMER
- bool "Power Management Timer Support"
+ bool "Power Management Timer Support" if EMBEDDED
depends on X86
- depends on !X86_64
default y
help
The Power Management Timer is available on all ACPI-capable,
@@ -298,9 +297,8 @@ config X86_PM_TIMER
voltage scaling, unlike the commonly used Time Stamp Counter
(TSC) timing source.
- So, if you see messages like 'Losing too many ticks!' in the
- kernel logs, and/or you are using this on a notebook which
- does not yet have an HPET, you should say "Y" here.
+ You should nearly always say Y here because many modern
+ systems require this timer.
config ACPI_CONTAINER
tristate "ACPI0004,PNP0A05 and PNP0A06 Container Driver (EXPERIMENTAL)"
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index c2490e2..a6b4f02 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -1095,17 +1095,17 @@ static inline void sx_receive_chars (struct sx_port *port)
sx_dprintk (SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c);
+ /* Don't copy past the end of the hardware receive buffer */
+ if (rx_op + c > 0x100) c = 0x100 - rx_op;
+
+ sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
+
/* Don't copy more bytes than there is room for in the buffer */
c = tty_prepare_flip_string(tty, &rp, c);
sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
- /* Don't copy past the end of the hardware receive buffer */
- if (rx_op + c > 0x100) c = 0x100 - rx_op;
-
- sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
-
/* If for one reason or another, we can't copy more data, we're done! */
if (c == 0) break;
@@ -2173,15 +2173,17 @@ static int probe_si (struct sx_board *board)
if ( IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
func_exit ();
return 0;
+ }
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
func_exit ();
return 0;
+ }
}
/* Now we're pretty much convinced that there is an SI board here,
@@ -2192,15 +2194,17 @@ static int probe_si (struct sx_board *board)
if ( IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
func_exit();
return 0;
+ }
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
func_exit ();
return 0;
+ }
}
printheader ();
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index c2c776f..eca92eb 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -137,15 +137,15 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)"
/*
* SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
* if your sbp2 device is not properly handling the SCSI inquiry command.
- * This hack makes the inquiry look more like a typical MS Windows
- * inquiry.
+ * This hack makes the inquiry look more like a typical MS Windows inquiry
+ * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
*
* If force_inquiry_hack=1 is required for your device to work,
* please submit the logged sbp2_firmware_revision value of this device to
* the linux1394-devel mailing list.
*/
static int force_inquiry_hack;
-module_param(force_inquiry_hack, int, 0444);
+module_param(force_inquiry_hack, int, 0644);
MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
/*
@@ -264,18 +264,17 @@ static struct hpsb_protocol_driver sbp2_driver = {
},
};
-
-/* List of device firmware's that require a forced 36 byte inquiry. */
+/*
+ * List of device firmwares that require the inquiry hack.
+ * Yields a few false positives but did not break other devices so far.
+ */
static u32 sbp2_broken_inquiry_list[] = {
- 0x00002800, /* Stefan Richter <richtest@bauwesen.tu-cottbus.de> */
+ 0x00002800, /* Stefan Richter <stefanr@s5r6.in-berlin.de> */
/* DViCO Momobay CX-1 */
0x00000200 /* Andreas Plesch <plesch@fas.harvard.edu> */
/* QPS Fire DVDBurner */
};
-#define NUM_BROKEN_INQUIRY_DEVS \
- (sizeof(sbp2_broken_inquiry_list)/sizeof(*sbp2_broken_inquiry_list))
-
/**************************************
* General utility functions
**************************************/
@@ -643,9 +642,15 @@ static int sbp2_remove(struct device *dev)
if (!scsi_id)
return 0;
- /* Trigger shutdown functions in scsi's highlevel. */
- if (scsi_id->scsi_host)
+ if (scsi_id->scsi_host) {
+ /* Get rid of enqueued commands if there is no chance to
+ * send them. */
+ if (!sbp2util_node_is_available(scsi_id))
+ sbp2scsi_complete_all_commands(scsi_id, DID_NO_CONNECT);
+ /* scsi_remove_device() will trigger shutdown functions of SCSI
+ * highlevel drivers which would deadlock if blocked. */
scsi_unblock_requests(scsi_id->scsi_host);
+ }
sdev = scsi_id->sdev;
if (sdev) {
scsi_id->sdev = NULL;
@@ -742,11 +747,6 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
hi->host = ud->ne->host;
INIT_LIST_HEAD(&hi->scsi_ids);
- /* Register our sbp2 status address space... */
- hpsb_register_addrspace(&sbp2_highlevel, ud->ne->host, &sbp2_ops,
- SBP2_STATUS_FIFO_ADDRESS,
- SBP2_STATUS_FIFO_ADDRESS +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(SBP2_MAX_UDS_PER_NODE+1));
#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
/* Handle data movement if physical dma is not
* enabled/supportedon host controller */
@@ -759,6 +759,18 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids);
+ /* Register the status FIFO address range. We could use the same FIFO
+ * for targets at different nodes. However we need different FIFOs per
+ * target in order to support multi-unit devices. */
+ scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
+ &sbp2_highlevel, ud->ne->host, &sbp2_ops,
+ sizeof(struct sbp2_status_block), sizeof(quadlet_t),
+ ~0ULL, ~0ULL);
+ if (!scsi_id->status_fifo_addr) {
+ SBP2_ERR("failed to allocate status FIFO address range");
+ goto failed_alloc;
+ }
+
/* Register our host with the SCSI stack. */
scsi_host = scsi_host_alloc(&scsi_driver_template,
sizeof(unsigned long));
@@ -997,6 +1009,10 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
SBP2_DMA_FREE("single query logins data");
}
+ if (scsi_id->status_fifo_addr)
+ hpsb_unregister_addrspace(&sbp2_highlevel, hi->host,
+ scsi_id->status_fifo_addr);
+
scsi_id->ud->device.driver_data = NULL;
SBP2_DEBUG("SBP-2 device removed, SCSI ID = %d", scsi_id->ud->id);
@@ -1075,11 +1091,10 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
ORB_SET_QUERY_LOGINS_RESP_LENGTH(sizeof(struct sbp2_query_logins_response));
SBP2_DEBUG("sbp2_query_logins: reserved_resp_length initialized");
- scsi_id->query_logins_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->query_logins_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
- SBP2_STATUS_FIFO_ADDRESS_HI);
- SBP2_DEBUG("sbp2_query_logins: status FIFO initialized");
+ scsi_id->query_logins_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->query_logins_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb));
@@ -1184,11 +1199,10 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response));
SBP2_DEBUG("sbp2_login_device: passwd_resp_lengths initialized");
- scsi_id->login_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->login_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
- SBP2_STATUS_FIFO_ADDRESS_HI);
- SBP2_DEBUG("sbp2_login_device: status FIFO initialized");
+ scsi_id->login_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->login_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@@ -1301,10 +1315,10 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
scsi_id->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->logout_orb->reserved5 = 0x0;
- scsi_id->logout_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->logout_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
- SBP2_STATUS_FIFO_ADDRESS_HI);
+ scsi_id->logout_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->logout_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@@ -1366,10 +1380,10 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
scsi_id->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->reconnect_orb->reserved5 = 0x0;
- scsi_id->reconnect_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->reconnect_orb->status_FIFO_hi =
- (ORB_SET_NODE_ID(hi->host->node_id) | SBP2_STATUS_FIFO_ADDRESS_HI);
+ scsi_id->reconnect_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->reconnect_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@@ -1560,7 +1574,7 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
/* Check for a blacklisted set of devices that require us to force
* a 36 byte host inquiry. This can be overriden as a module param
* (to force all hosts). */
- for (i = 0; i < NUM_BROKEN_INQUIRY_DEVS; i++) {
+ for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
if ((firmware_revision & 0xffff00) ==
sbp2_broken_inquiry_list[i]) {
SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
@@ -2007,18 +2021,6 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
}
/*
- * The scsi stack sends down a request_bufflen which does not match the
- * length field in the scsi cdb. This causes some sbp2 devices to
- * reject this inquiry command. Fix the request_bufflen.
- */
- if (*cmd == INQUIRY) {
- if (force_inquiry_hack || scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK)
- request_bufflen = cmd[4] = 0x24;
- else
- request_bufflen = cmd[4];
- }
-
- /*
* Now actually fill in the comamnd orb and sbp2 s/g list
*/
sbp2_create_command_orb(scsi_id, command, cmd, SCpnt->use_sg,
@@ -2106,7 +2108,6 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
{
struct sbp2scsi_host_info *hi;
struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp;
- u32 id;
struct scsi_cmnd *SCpnt = NULL;
u32 scsi_status = SBP2_SCSI_STATUS_GOOD;
struct sbp2_command_info *command;
@@ -2129,12 +2130,12 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
}
/*
- * Find our scsi_id structure by looking at the status fifo address written to by
- * the sbp2 device.
+ * Find our scsi_id structure by looking at the status fifo address
+ * written to by the sbp2 device.
*/
- id = SBP2_STATUS_FIFO_OFFSET_TO_ENTRY((u32)(addr - SBP2_STATUS_FIFO_ADDRESS));
list_for_each_entry(scsi_id_tmp, &hi->scsi_ids, scsi_list) {
- if (scsi_id_tmp->ne->nodeid == nodeid && scsi_id_tmp->ud->id == id) {
+ if (scsi_id_tmp->ne->nodeid == nodeid &&
+ scsi_id_tmp->status_fifo_addr == addr) {
scsi_id = scsi_id_tmp;
break;
}
@@ -2475,7 +2476,16 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
{
- ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = sdev;
+ struct scsi_id_instance_data *scsi_id =
+ (struct scsi_id_instance_data *)sdev->host->hostdata[0];
+
+ scsi_id->sdev = sdev;
+
+ if (force_inquiry_hack ||
+ scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
+ sdev->inquiry_len = 36;
+ sdev->skip_ms_page_8 = 1;
+ }
return 0;
}
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index 900ea1d..e2d357a 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -33,15 +33,17 @@
#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2
#define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31)
-#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
-#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
+#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
+#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
#define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16)
-#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
-#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
-#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
-#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
-#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
-#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
+#define ORB_SET_STATUS_FIFO_HI(value, id) (value >> 32 | ORB_SET_NODE_ID(id))
+#define ORB_SET_STATUS_FIFO_LO(value) (value & 0xffffffff)
+#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
+#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
+#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
+#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
+#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
+#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
struct sbp2_command_orb {
volatile u32 next_ORB_hi;
@@ -76,8 +78,8 @@ struct sbp2_login_orb {
u32 login_response_lo;
u32 lun_misc;
u32 passwd_resp_lengths;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
#define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff)
@@ -102,8 +104,8 @@ struct sbp2_query_logins_orb {
u32 query_response_lo;
u32 lun_misc;
u32 reserved_resp_length;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
#define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff)
@@ -123,8 +125,8 @@ struct sbp2_reconnect_orb {
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
struct sbp2_logout_orb {
@@ -134,8 +136,8 @@ struct sbp2_logout_orb {
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff)
@@ -195,30 +197,6 @@ struct sbp2_status_block {
* Miscellaneous SBP2 related config rom defines
*/
-/* The status fifo address definition below is used as a base for each
- * node, which a chunk seperately assigned to each unit directory in the
- * node. For example, 0xfffe00000000ULL is used for the first sbp2 device
- * detected on node 0, 0xfffe00000020ULL for the next sbp2 device on node
- * 0, and so on.
- *
- * Note: We could use a single status fifo address for all sbp2 devices,
- * and figure out which sbp2 device the status belongs to by looking at
- * the source node id of the status write... but, using separate addresses
- * for each sbp2 unit directory allows for better code and the ability to
- * support multiple luns within a single 1394 node.
- *
- * Also note that we choose the address range below as it is a region
- * specified for write posting, where the ohci controller will
- * automatically send an ack_complete when the status is written by the
- * sbp2 device... saving a split transaction. =)
- */
-#define SBP2_STATUS_FIFO_ADDRESS 0xfffe00000000ULL
-#define SBP2_STATUS_FIFO_ADDRESS_HI 0xfffe
-#define SBP2_STATUS_FIFO_ADDRESS_LO 0x0
-
-#define SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(entry) ((entry) << 5)
-#define SBP2_STATUS_FIFO_OFFSET_TO_ENTRY(offset) ((offset) >> 5)
-
#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
#define SBP2_CSR_OFFSET_KEY 0x54
#define SBP2_UNIT_SPEC_ID_KEY 0x12
@@ -258,7 +236,6 @@ struct sbp2_status_block {
*/
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
-#define SBP2_MAX_UDS_PER_NODE 16 /* Maximum scsi devices per node */
#define SBP2_MAX_SECTORS 255 /* Max sectors supported */
#define SBP2_MAX_CMDS 8 /* This should be safe */
@@ -338,6 +315,11 @@ struct scsi_id_instance_data {
u32 sbp2_firmware_revision;
/*
+ * Address for the device to write status blocks to
+ */
+ u64 status_fifo_addr;
+
+ /*
* Variable used for logins, reconnects, logouts, query logins
*/
atomic_t sbp2_login_complete;
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index e9adeb9..745ca1f 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -849,10 +849,16 @@ static struct mapped_device *alloc_dev(unsigned int minor, int persistent)
static void free_dev(struct mapped_device *md)
{
- free_minor(md->disk->first_minor);
+ unsigned int minor = md->disk->first_minor;
+
+ if (md->suspended_bdev) {
+ thaw_bdev(md->suspended_bdev, NULL);
+ bdput(md->suspended_bdev);
+ }
mempool_destroy(md->tio_pool);
mempool_destroy(md->io_pool);
del_gendisk(md->disk);
+ free_minor(minor);
put_disk(md->disk);
blk_put_queue(md->queue);
kfree(md);
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index ded2c33..1c074d6 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -408,6 +408,7 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp;
cfi->chips[i].ref_point_counter = 0;
+ init_waitqueue_head(&(cfi->chips[i].wq));
}
map->fldrv = &cfi_intelext_chipdrv;
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 1b69925..31fb2d7 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -57,7 +57,7 @@ struct ifb_private {
struct sk_buff_head tq;
};
-static int numifbs = 1;
+static int numifbs = 2;
static void ri_tasklet(unsigned long dev);
static int ifb_xmit(struct sk_buff *skb, struct net_device *dev);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 6e10184..8cc0d0b 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -287,6 +287,20 @@ enum RTL8169_register_content {
TxInterFrameGapShift = 24,
TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
+ /* Config1 register p.24 */
+ PMEnable = (1 << 0), /* Power Management Enable */
+
+ /* Config3 register p.25 */
+ MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */
+ LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */
+
+ /* Config5 register p.27 */
+ BWF = (1 << 6), /* Accept Broadcast wakeup frame */
+ MWF = (1 << 5), /* Accept Multicast wakeup frame */
+ UWF = (1 << 4), /* Accept Unicast wakeup frame */
+ LanWake = (1 << 1), /* LanWake enable/disable */
+ PMEStatus = (1 << 0), /* PME status can be reset by PCI RST# */
+
/* TBICSR p.28 */
TBIReset = 0x80000000,
TBILoopback = 0x40000000,
@@ -433,6 +447,7 @@ struct rtl8169_private {
unsigned int (*phy_reset_pending)(void __iomem *);
unsigned int (*link_ok)(void __iomem *);
struct work_struct task;
+ unsigned wol_enabled : 1;
};
MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
@@ -607,6 +622,80 @@ static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex)
*duplex = p->duplex;
}
+static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u8 options;
+
+ wol->wolopts = 0;
+
+#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
+ wol->supported = WAKE_ANY;
+
+ spin_lock_irq(&tp->lock);
+
+ options = RTL_R8(Config1);
+ if (!(options & PMEnable))
+ goto out_unlock;
+
+ options = RTL_R8(Config3);
+ if (options & LinkUp)
+ wol->wolopts |= WAKE_PHY;
+ if (options & MagicPacket)
+ wol->wolopts |= WAKE_MAGIC;
+
+ options = RTL_R8(Config5);
+ if (options & UWF)
+ wol->wolopts |= WAKE_UCAST;
+ if (options & BWF)
+ wol->wolopts |= WAKE_BCAST;
+ if (options & MWF)
+ wol->wolopts |= WAKE_MCAST;
+
+out_unlock:
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+ static struct {
+ u32 opt;
+ u16 reg;
+ u8 mask;
+ } cfg[] = {
+ { WAKE_ANY, Config1, PMEnable },
+ { WAKE_PHY, Config3, LinkUp },
+ { WAKE_MAGIC, Config3, MagicPacket },
+ { WAKE_UCAST, Config5, UWF },
+ { WAKE_BCAST, Config5, BWF },
+ { WAKE_MCAST, Config5, MWF },
+ { WAKE_ANY, Config5, LanWake }
+ };
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+ for (i = 0; i < ARRAY_SIZE(cfg); i++) {
+ u8 options = RTL_R8(cfg[i].reg) & ~cfg[i].mask;
+ if (wol->wolopts & cfg[i].opt)
+ options |= cfg[i].mask;
+ RTL_W8(cfg[i].reg, options);
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ tp->wol_enabled = (wol->wolopts) ? 1 : 0;
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
static void rtl8169_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
@@ -1025,6 +1114,8 @@ static struct ethtool_ops rtl8169_ethtool_ops = {
.get_tso = ethtool_op_get_tso,
.set_tso = ethtool_op_set_tso,
.get_regs = rtl8169_get_regs,
+ .get_wol = rtl8169_get_wol,
+ .set_wol = rtl8169_set_wol,
.get_strings = rtl8169_get_strings,
.get_stats_count = rtl8169_get_stats_count,
.get_ethtool_stats = rtl8169_get_ethtool_stats,
@@ -1442,6 +1533,11 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
}
tp->chipset = i;
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+ RTL_W8(Config1, RTL_R8(Config1) | PMEnable);
+ RTL_W8(Config5, RTL_R8(Config5) & PMEStatus);
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
*ioaddr_out = ioaddr;
*dev_out = dev;
out:
@@ -1612,49 +1708,6 @@ rtl8169_remove_one(struct pci_dev *pdev)
pci_set_drvdata(pdev, NULL);
}
-#ifdef CONFIG_PM
-
-static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct rtl8169_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->mmio_addr;
- unsigned long flags;
-
- if (!netif_running(dev))
- return 0;
-
- netif_device_detach(dev);
- netif_stop_queue(dev);
- spin_lock_irqsave(&tp->lock, flags);
-
- /* Disable interrupts, stop Rx and Tx */
- RTL_W16(IntrMask, 0);
- RTL_W8(ChipCmd, 0);
-
- /* Update the error counts. */
- tp->stats.rx_missed_errors += RTL_R32(RxMissed);
- RTL_W32(RxMissed, 0);
- spin_unlock_irqrestore(&tp->lock, flags);
-
- return 0;
-}
-
-static int rtl8169_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
-
- if (!netif_running(dev))
- return 0;
-
- netif_device_attach(dev);
- rtl8169_hw_start(dev);
-
- return 0;
-}
-
-#endif /* CONFIG_PM */
-
static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
struct net_device *dev)
{
@@ -2700,6 +2753,56 @@ static struct net_device_stats *rtl8169_get_stats(struct net_device *dev)
return &tp->stats;
}
+#ifdef CONFIG_PM
+
+static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ if (!netif_running(dev))
+ goto out;
+
+ netif_device_detach(dev);
+ netif_stop_queue(dev);
+
+ spin_lock_irq(&tp->lock);
+
+ rtl8169_asic_down(ioaddr);
+
+ tp->stats.rx_missed_errors += RTL_R32(RxMissed);
+ RTL_W32(RxMissed, 0);
+
+ spin_unlock_irq(&tp->lock);
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), tp->wol_enabled);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+out:
+ return 0;
+}
+
+static int rtl8169_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (!netif_running(dev))
+ goto out;
+
+ netif_device_attach(dev);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+out:
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
static struct pci_driver rtl8169_pci_driver = {
.name = MODULENAME,
.id_table = rtl8169_pci_tbl,
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 3d95fa2..7a952fe 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -540,7 +540,7 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
printk("%2.2x.\n", net_dev->dev_addr[i]);
/* Detect Wake on Lan support */
- ret = inl(CFGPMC & PMESP);
+ ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27;
if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0)
printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
@@ -2040,7 +2040,7 @@ static int sis900_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wo
if (wol->wolopts == 0) {
pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
- cfgpmcsr |= ~PME_EN;
+ cfgpmcsr &= ~PME_EN;
pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
outl(pmctrl_bits, pmctrl_addr);
if (netif_msg_wol(sis_priv))
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 67fb19b..25e028b 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -879,13 +879,12 @@ static int __xm_phy_read(struct skge_hw *hw, int port, u16 reg, u16 *val)
int i;
xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
- xm_read16(hw, port, XM_PHY_DATA);
+ *val = xm_read16(hw, port, XM_PHY_DATA);
- /* Need to wait for external PHY */
for (i = 0; i < PHY_RETRIES; i++) {
- udelay(1);
if (xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_RDY)
goto ready;
+ udelay(1);
}
return -ETIMEDOUT;
@@ -918,7 +917,12 @@ static int xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
ready:
xm_write16(hw, port, XM_PHY_DATA, val);
- return 0;
+ for (i = 0; i < PHY_RETRIES; i++) {
+ if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
+ return 0;
+ udelay(1);
+ }
+ return -ETIMEDOUT;
}
static void genesis_init(struct skge_hw *hw)
@@ -1168,13 +1172,17 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
u32 r;
const u8 zero[6] = { 0 };
- /* Clear MIB counters */
- xm_write16(hw, port, XM_STAT_CMD,
- XM_SC_CLR_RXC | XM_SC_CLR_TXC);
- /* Clear two times according to Errata #3 */
- xm_write16(hw, port, XM_STAT_CMD,
- XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+ for (i = 0; i < 10; i++) {
+ skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
+ MFF_SET_MAC_RST);
+ if (skge_read16(hw, SK_REG(port, TX_MFF_CTRL1)) & MFF_SET_MAC_RST)
+ goto reset_ok;
+ udelay(1);
+ }
+
+ printk(KERN_WARNING PFX "%s: genesis reset failed\n", dev->name);
+ reset_ok:
/* Unreset the XMAC. */
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
@@ -1191,7 +1199,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
r |= GP_DIR_2|GP_IO_2;
skge_write32(hw, B2_GP_IO, r);
- skge_read32(hw, B2_GP_IO);
+
/* Enable GMII interface */
xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
@@ -1205,6 +1213,13 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
for (i = 1; i < 16; i++)
xm_outaddr(hw, port, XM_EXM(i), zero);
+ /* Clear MIB counters */
+ xm_write16(hw, port, XM_STAT_CMD,
+ XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+ /* Clear two times according to Errata #3 */
+ xm_write16(hw, port, XM_STAT_CMD,
+ XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+
/* configure Rx High Water Mark (XM_RX_HI_WM) */
xm_write16(hw, port, XM_RX_HI_WM, 1450);
@@ -2170,8 +2185,10 @@ static int skge_up(struct net_device *dev)
skge->tx_avail = skge->tx_ring.count - 1;
/* Enable IRQ from port */
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= portirqmask[port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
/* Initialize MAC */
spin_lock_bh(&hw->phy_lock);
@@ -2229,8 +2246,10 @@ static int skge_down(struct net_device *dev)
else
yukon_stop(skge);
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask &= ~portirqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
/* Stop transmitter */
skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
@@ -2678,8 +2697,7 @@ static int skge_poll(struct net_device *dev, int *budget)
/* restart receiver */
wmb();
- skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR),
- CSR_START | CSR_IRQ_CL_F);
+ skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_START);
*budget -= work_done;
dev->quota -= work_done;
@@ -2687,10 +2705,11 @@ static int skge_poll(struct net_device *dev, int *budget)
if (work_done >= to_do)
return 1; /* not done */
- netif_rx_complete(dev);
- hw->intr_mask |= portirqmask[skge->port];
- skge_write32(hw, B0_IMSK, hw->intr_mask);
- skge_read32(hw, B0_IMSK);
+ spin_lock_irq(&hw->hw_lock);
+ __netif_rx_complete(dev);
+ hw->intr_mask |= portirqmask[skge->port];
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
return 0;
}
@@ -2850,18 +2869,10 @@ static void skge_extirq(unsigned long data)
}
spin_unlock(&hw->phy_lock);
- local_irq_disable();
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= IS_EXT_REG;
skge_write32(hw, B0_IMSK, hw->intr_mask);
- local_irq_enable();
-}
-
-static inline void skge_wakeup(struct net_device *dev)
-{
- struct skge_port *skge = netdev_priv(dev);
-
- prefetch(skge->rx_ring.to_clean);
- netif_rx_schedule(dev);
+ spin_unlock_irq(&hw->hw_lock);
}
static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
@@ -2872,15 +2883,17 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
if (status == 0 || status == ~0) /* hotplug or shared irq */
return IRQ_NONE;
- status &= hw->intr_mask;
+ spin_lock(&hw->hw_lock);
if (status & IS_R1_F) {
+ skge_write8(hw, Q_ADDR(Q_R1, Q_CSR), CSR_IRQ_CL_F);
hw->intr_mask &= ~IS_R1_F;
- skge_wakeup(hw->dev[0]);
+ netif_rx_schedule(hw->dev[0]);
}
if (status & IS_R2_F) {
+ skge_write8(hw, Q_ADDR(Q_R2, Q_CSR), CSR_IRQ_CL_F);
hw->intr_mask &= ~IS_R2_F;
- skge_wakeup(hw->dev[1]);
+ netif_rx_schedule(hw->dev[1]);
}
if (status & IS_XA1_F)
@@ -2922,6 +2935,7 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
}
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock(&hw->hw_lock);
return IRQ_HANDLED;
}
@@ -3290,6 +3304,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
hw->pdev = pdev;
spin_lock_init(&hw->phy_lock);
+ spin_lock_init(&hw->hw_lock);
tasklet_init(&hw->ext_tasklet, skge_extirq, (unsigned long) hw);
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index 2efdacc..941f12a 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -2402,6 +2402,7 @@ struct skge_hw {
struct tasklet_struct ext_tasklet;
spinlock_t phy_lock;
+ spinlock_t hw_lock;
};
enum {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index bfeba5b..ca8160d 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -195,11 +195,11 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
pr_debug("sky2_set_power_state %d\n", state);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control);
+ power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
(power_control & PCI_PM_CAP_PME_D3cold);
- pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control);
+ power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
power_control |= PCI_PM_CTRL_PME_STATUS;
power_control &= ~(PCI_PM_CTRL_STATE_MASK);
@@ -223,7 +223,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
/* Turn off phy power saving */
- pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
/* looks like this XL is back asswards .. */
@@ -232,18 +232,28 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
if (hw->ports > 1)
reg1 |= PCI_Y2_PHY2_COMA;
}
- pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
+ reg1 &= P_ASPM_CONTROL_MSK;
+ sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
+ sky2_pci_write32(hw, PCI_DEV_REG5, 0);
+ }
+
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+
break;
case PCI_D3hot:
case PCI_D3cold:
/* Turn on phy power saving */
- pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
else
reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
- pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
@@ -265,7 +275,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
ret = -1;
}
- pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control);
+ sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
return ret;
}
@@ -463,16 +473,31 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
}
- gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+ /* apply fixes in PHY AFE */
+ gm_phy_write(hw, port, 22, 255);
+ /* increase differential signal amplitude in 10BASE-T */
+ gm_phy_write(hw, port, 24, 0xaa99);
+ gm_phy_write(hw, port, 23, 0x2011);
- if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
- /* turn on 100 Mbps LED (LED_LINK100) */
- ledover |= PHY_M_LED_MO_100(MO_LED_ON);
- }
+ /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
+ gm_phy_write(hw, port, 24, 0xa204);
+ gm_phy_write(hw, port, 23, 0x2002);
- if (ledover)
- gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+ /* set page register to 0 */
+ gm_phy_write(hw, port, 22, 0);
+ } else {
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+ if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
+ /* turn on 100 Mbps LED (LED_LINK100) */
+ ledover |= PHY_M_LED_MO_100(MO_LED_ON);
+ }
+
+ if (ledover)
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+
+ }
/* Enable phy interrupt on auto-negotiation complete (or link up) */
if (sky2->autoneg == AUTONEG_ENABLE)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
@@ -953,6 +978,12 @@ static int sky2_rx_start(struct sky2_port *sky2)
sky2->rx_put = sky2->rx_next = 0;
sky2_qset(hw, rxq);
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+ /* MAC Rx RAM Read is controlled by hardware */
+ sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
+ }
+
sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
rx_set_checksum(sky2);
@@ -1035,9 +1066,10 @@ static int sky2_up(struct net_device *dev)
RB_RST_SET);
sky2_qset(hw, txqaddr[port]);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U)
- sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
+ /* Set almost empty threshold */
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1)
+ sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
TX_RING_SIZE - 1);
@@ -1047,8 +1079,10 @@ static int sky2_up(struct net_device *dev)
goto err_out;
/* Enable interrupts from phy/mac for port */
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
return 0;
err_out:
@@ -1348,10 +1382,10 @@ static int sky2_down(struct net_device *dev)
netif_stop_queue(dev);
/* Disable port IRQ */
- local_irq_disable();
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask &= ~((sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
sky2_write32(hw, B0_IMSK, hw->intr_mask);
- local_irq_enable();
+ spin_unlock_irq(&hw->hw_lock);
flush_scheduled_work();
@@ -1633,10 +1667,10 @@ static void sky2_phy_task(void *arg)
out:
up(&sky2->phy_sema);
- local_irq_disable();
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
- local_irq_enable();
+ spin_unlock_irq(&hw->hw_lock);
}
@@ -1863,6 +1897,17 @@ static int sky2_poll(struct net_device *dev0, int *budget)
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+ /*
+ * Kick the STAT_LEV_TIMER_CTRL timer.
+ * This fixes my hangs on Yukon-EC (0xb6) rev 1.
+ * The if clause is there to start the timer only if it has been
+ * configured correctly and not been disabled via ethtool.
+ */
+ if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_START) {
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
+ }
+
hwidx = sky2_read16(hw, STAT_PUT_IDX);
BUG_ON(hwidx >= STATUS_RING_SIZE);
rmb();
@@ -1945,16 +1990,19 @@ exit_loop:
sky2_tx_check(hw, 0, tx_done[0]);
sky2_tx_check(hw, 1, tx_done[1]);
+ if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
+ }
+
if (likely(work_done < to_do)) {
- /* need to restart TX timer */
- if (is_ec_a1(hw)) {
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
- }
+ spin_lock_irq(&hw->hw_lock);
+ __netif_rx_complete(dev0);
- netif_rx_complete(dev0);
hw->intr_mask |= Y2_IS_STAT_BMU;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
+
return 0;
} else {
*budget -= work_done;
@@ -2017,13 +2065,13 @@ static void sky2_hw_intr(struct sky2_hw *hw)
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
- pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err);
+ pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
pci_name(hw->pdev), pci_err);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_write_config_word(hw->pdev, PCI_STATUS,
+ sky2_pci_write16(hw, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
@@ -2032,7 +2080,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
/* PCI-Express uncorrectable Error occurred */
u32 pex_err;
- pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err);
+ pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
if (net_ratelimit())
printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
@@ -2040,7 +2088,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
/* clear the interrupt */
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
+ sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
0xffffffffUL);
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
@@ -2086,6 +2134,7 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
sky2_write32(hw, B0_IMSK, hw->intr_mask);
+
schedule_work(&sky2->phy_task);
}
@@ -2099,6 +2148,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
if (status == 0 || status == ~0)
return IRQ_NONE;
+ spin_lock(&hw->hw_lock);
if (status & Y2_IS_HW_ERR)
sky2_hw_intr(hw);
@@ -2127,7 +2177,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
sky2_write32(hw, B0_Y2_SP_ICR, 2);
- sky2_read32(hw, B0_IMSK);
+ spin_unlock(&hw->hw_lock);
return IRQ_HANDLED;
}
@@ -2170,7 +2220,7 @@ static int sky2_reset(struct sky2_hw *hw)
{
u16 status;
u8 t8, pmd_type;
- int i, err;
+ int i;
sky2_write8(hw, B0_CTST, CS_RST_CLR);
@@ -2192,25 +2242,18 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, B0_CTST, CS_RST_CLR);
/* clear PCI errors, if any */
- err = pci_read_config_word(hw->pdev, PCI_STATUS, &status);
- if (err)
- goto pci_err;
+ status = sky2_pci_read16(hw, PCI_STATUS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- err = pci_write_config_word(hw->pdev, PCI_STATUS,
- status | PCI_STATUS_ERROR_BITS);
- if (err)
- goto pci_err;
+ sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
+
sky2_write8(hw, B0_CTST, CS_MRST_CLR);
/* clear any PEX errors */
- if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) {
- err = pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
- 0xffffffffUL);
- if (err)
- goto pci_err;
- }
+ if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
+ sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
+
pmd_type = sky2_read8(hw, B2_PMD_TYP);
hw->copper = !(pmd_type == 'L' || pmd_type == 'S');
@@ -2309,8 +2352,7 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
- sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
- sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
+ sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 7));
}
/* enable status unit */
@@ -2321,14 +2363,6 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
return 0;
-
-pci_err:
- /* This is to catch a BIOS bug workaround where
- * mmconfig table doesn't have other buses.
- */
- printk(KERN_ERR PFX "%s: can't access PCI config space\n",
- pci_name(hw->pdev));
- return err;
}
static u32 sky2_supported_modes(const struct sky2_hw *hw)
@@ -2852,11 +2886,11 @@ static int sky2_set_coalesce(struct net_device *dev,
(ecmd->rx_coalesce_usecs_irq < tmin || ecmd->rx_coalesce_usecs_irq > tmax))
return -EINVAL;
- if (ecmd->tx_max_coalesced_frames > 0xffff)
+ if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
return -EINVAL;
- if (ecmd->rx_max_coalesced_frames > 0xff)
+ if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
return -EINVAL;
- if (ecmd->rx_max_coalesced_frames_irq > 0xff)
+ if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
return -EINVAL;
if (ecmd->tx_coalesce_usecs == 0)
@@ -3198,17 +3232,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
}
}
-#ifdef __BIG_ENDIAN
- /* byte swap descriptors in hardware */
- {
- u32 reg;
-
- pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
- reg |= PCI_REV_DESC;
- pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
- }
-#endif
-
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw) {
@@ -3226,6 +3249,18 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
goto err_out_free_hw;
}
hw->pm_cap = pm_cap;
+ spin_lock_init(&hw->hw_lock);
+
+#ifdef __BIG_ENDIAN
+ /* byte swap descriptors in hardware */
+ {
+ u32 reg;
+
+ reg = sky2_pci_read32(hw, PCI_DEV_REG2);
+ reg |= PCI_REV_DESC;
+ sky2_pci_write32(hw, PCI_DEV_REG2, reg);
+ }
+#endif
/* ring for status responses */
hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index fd12c28..3edb980 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -5,14 +5,22 @@
#define _SKY2_H
/* PCI config registers */
-#define PCI_DEV_REG1 0x40
-#define PCI_DEV_REG2 0x44
-#define PCI_DEV_STATUS 0x7c
-#define PCI_OS_PCI_X (1<<26)
+enum {
+ PCI_DEV_REG1 = 0x40,
+ PCI_DEV_REG2 = 0x44,
+ PCI_DEV_STATUS = 0x7c,
+ PCI_DEV_REG3 = 0x80,
+ PCI_DEV_REG4 = 0x84,
+ PCI_DEV_REG5 = 0x88,
+};
-#define PEX_LNK_STAT 0xf2
-#define PEX_UNC_ERR_STAT 0x104
-#define PEX_DEV_CTRL 0xe8
+enum {
+ PEX_DEV_CAP = 0xe4,
+ PEX_DEV_CTRL = 0xe8,
+ PEX_DEV_STA = 0xea,
+ PEX_LNK_STAT = 0xf2,
+ PEX_UNC_ERR_STAT= 0x104,
+};
/* Yukon-2 */
enum pci_dev_reg_1 {
@@ -37,6 +45,25 @@ enum pci_dev_reg_2 {
PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */
};
+/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */
+enum pci_dev_reg_4 {
+ /* (Link Training & Status State Machine) */
+ P_TIMER_VALUE_MSK = 0xffL<<16, /* Bit 23..16: Timer Value Mask */
+ /* (Active State Power Management) */
+ P_FORCE_ASPM_REQUEST = 1<<15, /* Force ASPM Request (A1 only) */
+ P_ASPM_GPHY_LINK_DOWN = 1<<14, /* GPHY Link Down (A1 only) */
+ P_ASPM_INT_FIFO_EMPTY = 1<<13, /* Internal FIFO Empty (A1 only) */
+ P_ASPM_CLKRUN_REQUEST = 1<<12, /* CLKRUN Request (A1 only) */
+
+ P_ASPM_FORCE_CLKREQ_ENA = 1<<4, /* Force CLKREQ Enable (A1b only) */
+ P_ASPM_CLKREQ_PAD_CTL = 1<<3, /* CLKREQ PAD Control (A1 only) */
+ P_ASPM_A1_MODE_SELECT = 1<<2, /* A1 Mode Select (A1 only) */
+ P_CLK_GATE_PEX_UNIT_ENA = 1<<1, /* Enable Gate PEX Unit Clock */
+ P_CLK_GATE_ROOT_COR_ENA = 1<<0, /* Enable Gate Root Core Clock */
+ P_ASPM_CONTROL_MSK = P_FORCE_ASPM_REQUEST | P_ASPM_GPHY_LINK_DOWN
+ | P_ASPM_CLKRUN_REQUEST | P_ASPM_INT_FIFO_EMPTY,
+};
+
#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
PCI_STATUS_SIG_SYSTEM_ERROR | \
@@ -507,6 +534,16 @@ enum {
};
#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
+/* Q_F 32 bit Flag Register */
+enum {
+ F_ALM_FULL = 1<<27, /* Rx FIFO: almost full */
+ F_EMPTY = 1<<27, /* Tx FIFO: empty flag */
+ F_FIFO_EOF = 1<<26, /* Tag (EOF Flag) bit in FIFO */
+ F_WM_REACHED = 1<<25, /* Watermark reached */
+ F_M_RX_RAM_DIS = 1<<24, /* MAC Rx RAM Read Port disable */
+ F_FIFO_LEVEL = 0x1fL<<16, /* Bit 23..16: # of Qwords in FIFO */
+ F_WATER_MARK = 0x0007ffL, /* Bit 10.. 0: Watermark */
+};
/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
enum {
@@ -909,10 +946,12 @@ enum {
PHY_BCOM_ID1_C0 = 0x6044,
PHY_BCOM_ID1_C5 = 0x6047,
- PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
+ PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */
- PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
- PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
+ PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
+ PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
+ PHY_MARV_ID1_FE = 0x0C83, /* Yukon-FE (PHY 88E3082 Rev.A1) */
+ PHY_MARV_ID1_ECU= 0x0CB0, /* Yukon-ECU (PHY 88E1149 Rev.B2?) */
};
/* Advertisement register bits */
@@ -1837,8 +1876,9 @@ struct sky2_port {
struct sky2_hw {
void __iomem *regs;
struct pci_dev *pdev;
- u32 intr_mask;
struct net_device *dev[2];
+ spinlock_t hw_lock;
+ u32 intr_mask;
int pm_cap;
int msi;
@@ -1912,4 +1952,25 @@ static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg,
gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
}
+
+/* PCI config space access */
+static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg)
+{
+ return sky2_read32(hw, Y2_CFG_SPC + reg);
+}
+
+static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg)
+{
+ return sky2_read16(hw, Y2_CFG_SPC + reg);
+}
+
+static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val)
+{
+ sky2_write32(hw, Y2_CFG_SPC + reg, val);
+}
+
+static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val)
+{
+ sky2_write16(hw, Y2_CFG_SPC + reg, val);
+}
#endif
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e7dc653..e8e92c8 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9408,6 +9408,15 @@ static int __devinit tg3_is_sun_570X(struct tg3 *tp)
return 0;
if (venid == PCI_VENDOR_ID_SUN)
return 1;
+
+ /* TG3 chips onboard the SunBlade-2500 don't have the
+ * subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they
+ * are distinguishable from non-Sun variants by being
+ * named "network" by the firmware. Non-Sun cards will
+ * show up as being named "ethernet".
+ */
+ if (!strcmp(pcp->prom_name, "network"))
+ return 1;
}
return 0;
}
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index c2506b5..12076f8 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -536,6 +536,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
u16 device_id;
int reg, rc = -ENODEV;
+#ifdef CONFIG_PCI
if (pdev) {
rc = pci_enable_device(pdev);
if (rc)
@@ -547,6 +548,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
goto err_out;
}
}
+#endif /* CONFIG_PCI */
dev = alloc_etherdev(sizeof(TLanPrivateInfo));
if (dev == NULL) {
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 5f1d758..4f91b0d 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -82,6 +82,10 @@ int atapi_enabled = 0;
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+int libata_fua = 0;
+module_param_named(fua, libata_fua, int, 0444);
+MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 07b1e7c..59503c9 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -1708,6 +1708,8 @@ static int ata_dev_supports_fua(u16 *id)
{
unsigned char model[41], fw[9];
+ if (!libata_fua)
+ return 0;
if (!ata_id_has_fua(id))
return 0;
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index e03ce48..fddaf47 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -41,6 +41,7 @@ struct ata_scsi_args {
/* libata-core.c */
extern int atapi_enabled;
+extern int libata_fua;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 17f74d3..9face3c 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -49,11 +49,13 @@
#define DRV_VERSION "0.9"
enum {
+ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
SIL_FLAG_MOD15WRITE = (1 << 30),
sil_3112 = 0,
sil_3112_m15w = 1,
- sil_3114 = 2,
+ sil_3512 = 2,
+ sil_3114 = 3,
SIL_FIFO_R0 = 0x40,
SIL_FIFO_W0 = 0x41,
@@ -90,7 +92,7 @@ static void sil_post_set_mode (struct ata_port *ap);
static const struct pci_device_id sil_pci_tbl[] = {
{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
- { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
{ 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
@@ -185,7 +187,8 @@ static const struct ata_port_info sil_port_info[] = {
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3112_15w - keep it sync'd w/ sil_3112 */
+ },
+ /* sil_3112_15w - keep it sync'd w/ sil_3112 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
@@ -195,11 +198,24 @@ static const struct ata_port_info sil_port_info[] = {
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3114 */
+ },
+ /* sil_3512 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil_ops,
+ },
+ /* sil_3114 */
+ {
+ .sht = &sil_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
@@ -216,12 +232,13 @@ static const struct {
unsigned long scr; /* SATA control register block */
unsigned long sien; /* SATA Interrupt Enable register */
unsigned long xfer_mode;/* data transfer mode register */
+ unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
- { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 },
- { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 },
- { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 },
- { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 },
+ { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4, 0x14c },
+ { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4, 0x1cc },
+ { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4, 0x34c },
+ { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
};
@@ -471,6 +488,23 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
dev_printk(KERN_WARNING, &pdev->dev,
"cache line size not set. Driver may not function\n");
+ /* Apply R_ERR on DMA activate FIS errata workaround */
+ if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ int cnt;
+
+ for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
+ tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+ if ((tmp & 0x3) != 0x01)
+ continue;
+ if (!cnt)
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Applying R_ERR on DMA activate "
+ "FIS errata fix\n");
+ writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+ cnt++;
+ }
+ }
+
if (ent->driver_data == sil_3114) {
irq_mask = SIL_MASK_4PORT;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 930db39..9d98723 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -89,6 +89,11 @@
#define SD_MAX_RETRIES 5
#define SD_PASSTHROUGH_RETRIES 1
+/*
+ * Size of the initial data buffer for mode and read capacity data
+ */
+#define SD_BUF_SIZE 512
+
static void scsi_disk_release(struct kref *kref);
struct scsi_disk {
@@ -1239,7 +1244,7 @@ sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
/*
* read write protect setting, if possible - called only in sd_revalidate_disk()
- * called with buffer of length 512
+ * called with buffer of length SD_BUF_SIZE
*/
static void
sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
@@ -1297,7 +1302,7 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
/*
* sd_read_cache_type - called only from sd_revalidate_disk()
- * called with buffer of length 512
+ * called with buffer of length SD_BUF_SIZE
*/
static void
sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
@@ -1342,6 +1347,8 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
/* Take headers and block descriptors into account */
len += data.header_length + data.block_descriptor_length;
+ if (len > SD_BUF_SIZE)
+ goto bad_sense;
/* Get the data */
res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr);
@@ -1354,6 +1361,12 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
int ct = 0;
int offset = data.header_length + data.block_descriptor_length;
+ if (offset >= SD_BUF_SIZE - 2) {
+ printk(KERN_ERR "%s: malformed MODE SENSE response",
+ diskname);
+ goto defaults;
+ }
+
if ((buffer[offset] & 0x3f) != modepage) {
printk(KERN_ERR "%s: got wrong page\n", diskname);
goto defaults;
@@ -1398,6 +1411,7 @@ defaults:
diskname);
sdkp->WCE = 0;
sdkp->RCD = 0;
+ sdkp->DPOFUA = 0;
}
/**
@@ -1421,7 +1435,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
if (!scsi_device_online(sdp))
goto out;
- buffer = kmalloc(512, GFP_KERNEL | __GFP_DMA);
+ buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL | __GFP_DMA);
if (!buffer) {
printk(KERN_WARNING "(sd_revalidate_disk:) Memory allocation "
"failure.\n");
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 244e8ff..7aca22c 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2326,6 +2326,12 @@ static struct uart_driver serial8250_reg = {
.cons = SERIAL8250_CONSOLE,
};
+/*
+ * early_serial_setup - early registration for 8250 ports
+ *
+ * Setup an 8250 port structure prior to console initialisation. Use
+ * after console initialisation will cause undefined behaviour.
+ */
int __init early_serial_setup(struct uart_port *port)
{
if (port->line >= ARRAY_SIZE(serial8250_ports))
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e64ed16..f5079c7 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -520,7 +520,7 @@ config FB_GBE
config FB_GBE_MEM
int "Video memory size in MB"
depends on FB_GBE
- default 8
+ default 4
help
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.
diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c
index 69f7554..c924d81 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/asiliantfb.c
@@ -322,32 +322,29 @@ static int asiliantfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
writeb(green, mmio_base + 0x791);
writeb(blue, mmio_base + 0x791);
- switch(p->var.bits_per_pixel) {
- case 15:
- if (regno < 16) {
+ if (regno < 16) {
+ switch(p->var.red.offset) {
+ case 10: /* RGB 555 */
((u32 *)(p->pseudo_palette))[regno] =
((red & 0xf8) << 7) |
((green & 0xf8) << 2) |
((blue & 0xf8) >> 3);
- }
- break;
- case 16:
- if (regno < 16) {
+ break;
+ case 11: /* RGB 565 */
((u32 *)(p->pseudo_palette))[regno] =
((red & 0xf8) << 8) |
((green & 0xfc) << 3) |
((blue & 0xf8) >> 3);
- }
- break;
- case 24:
- if (regno < 24) {
+ break;
+ case 16: /* RGB 888 */
((u32 *)(p->pseudo_palette))[regno] =
(red << 16) |
(green << 8) |
(blue);
+ break;
}
- break;
}
+
return 0;
}
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 2406899..3d04b2d 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -49,6 +49,7 @@
#include <linux/interrupt.h>
#include <linux/ctype.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
@@ -406,7 +407,7 @@ int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
vma->vm_flags |= VM_IO;
- if (io_remap_page_range(vma, vma->vm_start, off,
+ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
vma->vm_end - vma->vm_start,
vma->vm_page_prot)) {
return -EAGAIN;
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 12d9329..5a86978 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -509,57 +509,60 @@ static int vgacon_doresize(struct vc_data *c,
{
unsigned long flags;
unsigned int scanlines = height * c->vc_font.height;
- u8 scanlines_lo, r7, vsync_end, mode, max_scan;
+ u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan;
spin_lock_irqsave(&vga_lock, flags);
- outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
- max_scan = inb_p(vga_video_port_val);
-
- if (max_scan & 0x80)
- scanlines <<= 1;
-
vgacon_xres = width * VGA_FONTWIDTH;
vgacon_yres = height * c->vc_font.height;
- outb_p(VGA_CRTC_MODE, vga_video_port_reg);
- mode = inb_p(vga_video_port_val);
+ if (vga_video_type >= VIDEO_TYPE_VGAC) {
+ outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
+ max_scan = inb_p(vga_video_port_val);
- if (mode & 0x04)
- scanlines >>= 1;
+ if (max_scan & 0x80)
+ scanlines <<= 1;
- scanlines -= 1;
- scanlines_lo = scanlines & 0xff;
+ outb_p(VGA_CRTC_MODE, vga_video_port_reg);
+ mode = inb_p(vga_video_port_val);
- outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
- r7 = inb_p(vga_video_port_val) & ~0x42;
+ if (mode & 0x04)
+ scanlines >>= 1;
- if (scanlines & 0x100)
- r7 |= 0x02;
- if (scanlines & 0x200)
- r7 |= 0x40;
+ scanlines -= 1;
+ scanlines_lo = scanlines & 0xff;
- /* deprotect registers */
- outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
- vsync_end = inb_p(vga_video_port_val);
- outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
- outb_p(vsync_end & ~0x80, vga_video_port_val);
+ outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
+ r7 = inb_p(vga_video_port_val) & ~0x42;
+
+ if (scanlines & 0x100)
+ r7 |= 0x02;
+ if (scanlines & 0x200)
+ r7 |= 0x40;
+
+ /* deprotect registers */
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ vsync_end = inb_p(vga_video_port_val);
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ outb_p(vsync_end & ~0x80, vga_video_port_val);
+ }
outb_p(VGA_CRTC_H_DISP, vga_video_port_reg);
outb_p(width - 1, vga_video_port_val);
outb_p(VGA_CRTC_OFFSET, vga_video_port_reg);
outb_p(width >> 1, vga_video_port_val);
- outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg);
- outb_p(scanlines_lo, vga_video_port_val);
- outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
- outb_p(r7,vga_video_port_val);
+ if (vga_video_type >= VIDEO_TYPE_VGAC) {
+ outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg);
+ outb_p(scanlines_lo, vga_video_port_val);
+ outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
+ outb_p(r7,vga_video_port_val);
- /* reprotect registers */
- outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
- outb_p(vsync_end, vga_video_port_val);
+ /* reprotect registers */
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ outb_p(vsync_end, vga_video_port_val);
+ }
spin_unlock_irqrestore(&vga_lock, flags);
-
return 0;
}
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index c9a7cdf..5e25b98 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -656,12 +656,15 @@ static int gbefb_set_par(struct fb_info *info)
switch (bytesPerPixel) {
case 1:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_I8);
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
break;
case 2:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_ARGB5);
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 4:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_RGB8);
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
}
SET_GBE_FIELD(WID, BUF, val, GBE_BMODE_BOTH);
OpenPOWER on IntegriCloud