Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits)
  ARM: Eliminate decompressor -Dstatic= PIC hack
  ARM: 5958/1: ARM: U300: fix inverted clk round rate
  ARM: 5956/1: misplaced parentheses
  ARM: 5955/1: ep93xx: move timer defines into core.c and document
  ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c
  ARM: 5953/1: ep93xx: fix broken build of clock.c
  ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
  ARM: 5949/1: NUC900 add gpio virtual memory map
  ARM: 5948/1: Enable timer0 to time4 clock support for nuc910
  ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk
  ARM: make_coherent(): fix problems with highpte, part 2
  MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
  ARM: 5945/1: ep93xx: include correct irq.h in core.c
  ARM: 5933/1: amba-pl011: support hardware flow control
  ARM: 5930/1: Add PKMAP area description to memory.txt.
  ARM: 5929/1: Add checks to detect overlap of memory regions.
  ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
  ARM: 5927/1: Make delimiters of DMA area globally visibly.
  ARM: 5926/1: Add "Virtual kernel memory..." printout.
  ARM: 5920/1: OMAP4: Enable L2 Cache
  ...

Fix up trivial conflict in arch/arm/mach-mx25/clock.c

6 files changed, 565 insertions, 202 deletions

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5d1c260..2b0bd0b 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -20,15 +20,15 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-pnx.h>
 #include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
 
 #define I2C_PNX_TIMEOUT		10 /* msec */
 #define I2C_PNX_SPEED_KHZ	100
 #define I2C_PNX_REGION_SIZE	0x100
-#define PNX_DEFAULT_FREQ	13 /* MHz */
 
 static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
 {
@@ -50,22 +50,21 @@ static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data)
 	return (timeout <= 0);
 }
 
-static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
+static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *data = adap->algo_data;
-	struct timer_list *timer = &data->mif.timer;
-	int expires = I2C_PNX_TIMEOUT / (1000 / HZ);
+	struct timer_list *timer = &alg_data->mif.timer;
+	unsigned long expires = msecs_to_jiffies(I2C_PNX_TIMEOUT);
 
 	if (expires <= 1)
 		expires = 2;
 
 	del_timer_sync(timer);
 
-	dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n",
+	dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %lu jiffies.\n",
 		jiffies, expires);
 
 	timer->expires = jiffies + expires;
-	timer->data = (unsigned long)adap;
+	timer->data = (unsigned long)&alg_data;
 
 	add_timer(timer);
 }
@@ -77,34 +76,34 @@ static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
  *
  * Generate a START signal in the desired mode.
  */
-static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
+static int i2c_pnx_start(unsigned char slave_addr,
+	struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
-
-	dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __func__,
+	dev_dbg(&alg_data->adapter.dev, "%s(): addr 0x%x mode %d\n", __func__,
 		slave_addr, alg_data->mif.mode);
 
 	/* Check for 7 bit slave addresses only */
 	if (slave_addr & ~0x7f) {
-		dev_err(&adap->dev, "%s: Invalid slave address %x. "
-		       "Only 7-bit addresses are supported\n",
-		       adap->name, slave_addr);
+		dev_err(&alg_data->adapter.dev,
+			"%s: Invalid slave address %x. Only 7-bit addresses are supported\n",
+			alg_data->adapter.name, slave_addr);
 		return -EINVAL;
 	}
 
 	/* First, make sure bus is idle */
 	if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) {
 		/* Somebody else is monopolizing the bus */
-		dev_err(&adap->dev, "%s: Bus busy. Slave addr = %02x, "
-		       "cntrl = %x, stat = %x\n",
-		       adap->name, slave_addr,
-		       ioread32(I2C_REG_CTL(alg_data)),
-		       ioread32(I2C_REG_STS(alg_data)));
+		dev_err(&alg_data->adapter.dev,
+			"%s: Bus busy. Slave addr = %02x, cntrl = %x, stat = %x\n",
+			alg_data->adapter.name, slave_addr,
+			ioread32(I2C_REG_CTL(alg_data)),
+			ioread32(I2C_REG_STS(alg_data)));
 		return -EBUSY;
 	} else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
 		/* Sorry, we lost the bus */
-		dev_err(&adap->dev, "%s: Arbitration failure. "
-		       "Slave addr = %02x\n", adap->name, slave_addr);
+		dev_err(&alg_data->adapter.dev,
+		        "%s: Arbitration failure. Slave addr = %02x\n",
+			alg_data->adapter.name, slave_addr);
 		return -EIO;
 	}
 
@@ -115,14 +114,14 @@ static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
 	iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
 		  I2C_REG_STS(alg_data));
 
-	dev_dbg(&adap->dev, "%s(): sending %#x\n", __func__,
+	dev_dbg(&alg_data->adapter.dev, "%s(): sending %#x\n", __func__,
 		(slave_addr << 1) | start_bit | alg_data->mif.mode);
 
 	/* Write the slave address, START bit and R/W bit */
 	iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
 		  I2C_REG_TX(alg_data));
 
-	dev_dbg(&adap->dev, "%s(): exit\n", __func__);
+	dev_dbg(&alg_data->adapter.dev, "%s(): exit\n", __func__);
 
 	return 0;
 }
@@ -133,13 +132,12 @@ static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
  *
  * Generate a STOP signal to terminate the master transaction.
  */
-static void i2c_pnx_stop(struct i2c_adapter *adap)
+static void i2c_pnx_stop(struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 	/* Only 1 msec max timeout due to interrupt context */
 	long timeout = 1000;
 
-	dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	/* Write a STOP bit to TX FIFO */
@@ -153,7 +151,7 @@ static void i2c_pnx_stop(struct i2c_adapter *adap)
 		timeout--;
 	}
 
-	dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 }
 
@@ -163,12 +161,11 @@ static void i2c_pnx_stop(struct i2c_adapter *adap)
  *
  * Sends one byte of data to the slave
  */
-static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
+static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 	u32 val;
 
-	dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	if (alg_data->mif.len > 0) {
@@ -184,15 +181,15 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
 		alg_data->mif.len--;
 		iowrite32(val, I2C_REG_TX(alg_data));
 
-		dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __func__,
-			val, alg_data->mif.len + 1);
+		dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n",
+			__func__, val, alg_data->mif.len + 1);
 
 		if (alg_data->mif.len == 0) {
 			if (alg_data->last) {
 				/* Wait until the STOP is seen. */
 				if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
-					dev_err(&adap->dev, "The bus is still "
-						"active after timeout\n");
+					dev_err(&alg_data->adapter.dev,
+						"The bus is still active after timeout\n");
 			}
 			/* Disable master interrupts */
 			iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
@@ -201,14 +198,15 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
 
 			del_timer_sync(&alg_data->mif.timer);
 
-			dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n",
+			dev_dbg(&alg_data->adapter.dev,
+				"%s(): Waking up xfer routine.\n",
 				__func__);
 
 			complete(&alg_data->mif.complete);
 		}
 	} else if (alg_data->mif.len == 0) {
 		/* zero-sized transfer */
-		i2c_pnx_stop(adap);
+		i2c_pnx_stop(alg_data);
 
 		/* Disable master interrupts. */
 		iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
@@ -217,13 +215,14 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
 
 		/* Stop timer. */
 		del_timer_sync(&alg_data->mif.timer);
-		dev_dbg(&adap->dev, "%s(): Waking up xfer routine after "
-			"zero-xfer.\n", __func__);
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Waking up xfer routine after zero-xfer.\n",
+			__func__);
 
 		complete(&alg_data->mif.complete);
 	}
 
-	dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	return 0;
@@ -235,21 +234,21 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
  *
  * Reads one byte data from the slave
  */
-static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
+static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 	unsigned int val = 0;
 	u32 ctl = 0;
 
-	dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	/* Check, whether there is already data,
 	 * or we didn't 'ask' for it yet.
 	 */
 	if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
-		dev_dbg(&adap->dev, "%s(): Write dummy data to fill "
-			"Rx-fifo...\n", __func__);
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Write dummy data to fill Rx-fifo...\n",
+			__func__);
 
 		if (alg_data->mif.len == 1) {
 			/* Last byte, do not acknowledge next rcv. */
@@ -281,16 +280,16 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
 	if (alg_data->mif.len > 0) {
 		val = ioread32(I2C_REG_RX(alg_data));
 		*alg_data->mif.buf++ = (u8) (val & 0xff);
-		dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __func__, val,
-			alg_data->mif.len);
+		dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n",
+			__func__, val, alg_data->mif.len);
 
 		alg_data->mif.len--;
 		if (alg_data->mif.len == 0) {
 			if (alg_data->last)
 				/* Wait until the STOP is seen. */
 				if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
-					dev_err(&adap->dev, "The bus is still "
-						"active after timeout\n");
+					dev_err(&alg_data->adapter.dev,
+						"The bus is still active after timeout\n");
 
 			/* Disable master interrupts */
 			ctl = ioread32(I2C_REG_CTL(alg_data));
@@ -304,7 +303,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
 		}
 	}
 
-	dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	return 0;
@@ -312,11 +311,11 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
 
 static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 {
+	struct i2c_pnx_algo_data *alg_data = dev_id;
 	u32 stat, ctl;
-	struct i2c_adapter *adap = dev_id;
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 
-	dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): mstat = %x mctrl = %x, mode = %d\n",
 		__func__,
 		ioread32(I2C_REG_STS(alg_data)),
 		ioread32(I2C_REG_CTL(alg_data)),
@@ -339,10 +338,10 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 		complete(&alg_data->mif.complete);
 	} else if (stat & mstatus_nai) {
 		/* Slave did not acknowledge, generate a STOP */
-		dev_dbg(&adap->dev, "%s(): "
-			"Slave did not acknowledge, generating a STOP.\n",
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Slave did not acknowledge, generating a STOP.\n",
 			__func__);
-		i2c_pnx_stop(adap);
+		i2c_pnx_stop(alg_data);
 
 		/* Disable master interrupts. */
 		ctl = ioread32(I2C_REG_CTL(alg_data));
@@ -368,9 +367,9 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 		 */
 		if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) {
 			if (alg_data->mif.mode == I2C_SMBUS_WRITE) {
-				i2c_pnx_master_xmit(adap);
+				i2c_pnx_master_xmit(alg_data);
 			} else if (alg_data->mif.mode == I2C_SMBUS_READ) {
-				i2c_pnx_master_rcv(adap);
+				i2c_pnx_master_rcv(alg_data);
 			}
 		}
 	}
@@ -379,7 +378,8 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 	stat = ioread32(I2C_REG_STS(alg_data));
 	iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
 
-	dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n",
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): exiting, stat = %x ctrl = %x.\n",
 		 __func__, ioread32(I2C_REG_STS(alg_data)),
 		 ioread32(I2C_REG_CTL(alg_data)));
 
@@ -388,14 +388,13 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 
 static void i2c_pnx_timeout(unsigned long data)
 {
-	struct i2c_adapter *adap = (struct i2c_adapter *)data;
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+	struct i2c_pnx_algo_data *alg_data = (struct i2c_pnx_algo_data *)data;
 	u32 ctl;
 
-	dev_err(&adap->dev, "Master timed out. stat = %04x, cntrl = %04x. "
-	       "Resetting master...\n",
-	       ioread32(I2C_REG_STS(alg_data)),
-	       ioread32(I2C_REG_CTL(alg_data)));
+	dev_err(&alg_data->adapter.dev,
+		"Master timed out. stat = %04x, cntrl = %04x. Resetting master...\n",
+		ioread32(I2C_REG_STS(alg_data)),
+		ioread32(I2C_REG_CTL(alg_data)));
 
 	/* Reset master and disable interrupts */
 	ctl = ioread32(I2C_REG_CTL(alg_data));
@@ -409,15 +408,14 @@ static void i2c_pnx_timeout(unsigned long data)
 	complete(&alg_data->mif.complete);
 }
 
-static inline void bus_reset_if_active(struct i2c_adapter *adap)
+static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 	u32 stat;
 
 	if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
-		dev_err(&adap->dev,
+		dev_err(&alg_data->adapter.dev,
 			"%s: Bus is still active after xfer. Reset it...\n",
-		       adap->name);
+			alg_data->adapter.name);
 		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
 			  I2C_REG_CTL(alg_data));
 		wait_reset(I2C_PNX_TIMEOUT, alg_data);
@@ -451,10 +449,11 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 	u32 stat = ioread32(I2C_REG_STS(alg_data));
 
-	dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): entering: %d messages, stat = %04x.\n",
 		__func__, num, ioread32(I2C_REG_STS(alg_data)));
 
-	bus_reset_if_active(adap);
+	bus_reset_if_active(alg_data);
 
 	/* Process transactions in a loop. */
 	for (i = 0; rc >= 0 && i < num; i++) {
@@ -464,9 +463,9 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		addr = pmsg->addr;
 
 		if (pmsg->flags & I2C_M_TEN) {
-			dev_err(&adap->dev,
+			dev_err(&alg_data->adapter.dev,
 				"%s: 10 bits addr not supported!\n",
-				adap->name);
+				alg_data->adapter.name);
 			rc = -EINVAL;
 			break;
 		}
@@ -478,11 +477,10 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		alg_data->mif.ret = 0;
 		alg_data->last = (i == num - 1);
 
-		dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __func__,
-			alg_data->mif.mode,
-			alg_data->mif.len);
+		dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n",
+			__func__, alg_data->mif.mode, alg_data->mif.len);
 
-		i2c_pnx_arm_timer(adap);
+		i2c_pnx_arm_timer(alg_data);
 
 		/* initialize the completion var */
 		init_completion(&alg_data->mif.complete);
@@ -493,7 +491,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			  I2C_REG_CTL(alg_data));
 
 		/* Put start-code and slave-address on the bus. */
-		rc = i2c_pnx_start(addr, adap);
+		rc = i2c_pnx_start(addr, alg_data);
 		if (rc < 0)
 			break;
 
@@ -502,31 +500,32 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 
 		if (!(rc = alg_data->mif.ret))
 			completed++;
-		dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n",
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Complete, return code = %d.\n",
 			__func__, rc);
 
 		/* Clear TDI and AFI bits in case they are set. */
 		if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
-			dev_dbg(&adap->dev,
+			dev_dbg(&alg_data->adapter.dev,
 				"%s: TDI still set... clearing now.\n",
-			       adap->name);
+				alg_data->adapter.name);
 			iowrite32(stat, I2C_REG_STS(alg_data));
 		}
 		if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) {
-			dev_dbg(&adap->dev,
+			dev_dbg(&alg_data->adapter.dev,
 				"%s: AFI still set... clearing now.\n",
-			       adap->name);
+				alg_data->adapter.name);
 			iowrite32(stat, I2C_REG_STS(alg_data));
 		}
 	}
 
-	bus_reset_if_active(adap);
+	bus_reset_if_active(alg_data);
 
 	/* Cleanup to be sure... */
 	alg_data->mif.buf = NULL;
 	alg_data->mif.len = 0;
 
-	dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	if (completed != num)
@@ -545,69 +544,92 @@ static struct i2c_algorithm pnx_algorithm = {
 	.functionality = i2c_pnx_func,
 };
 
+#ifdef CONFIG_PM
 static int i2c_pnx_controller_suspend(struct platform_device *pdev,
 				      pm_message_t state)
 {
-	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
-	return i2c_pnx->suspend(pdev, state);
+	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
+
+	/* FIXME: shouldn't this be clk_disable? */
+	clk_enable(alg_data->clk);
+
+	return 0;
 }
 
 static int i2c_pnx_controller_resume(struct platform_device *pdev)
 {
-	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
-	return i2c_pnx->resume(pdev);
+	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
+
+	return clk_enable(alg_data->clk);
 }
+#else
+#define i2c_pnx_controller_suspend	NULL
+#define i2c_pnx_controller_resume	NULL
+#endif
 
 static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 {
 	unsigned long tmp;
 	int ret = 0;
 	struct i2c_pnx_algo_data *alg_data;
-	int freq_mhz;
+	unsigned long freq;
 	struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data;
 
-	if (!i2c_pnx || !i2c_pnx->adapter) {
+	if (!i2c_pnx || !i2c_pnx->name) {
 		dev_err(&pdev->dev, "%s: no platform data supplied\n",
 		       __func__);
 		ret = -EINVAL;
 		goto out;
 	}
 
-	platform_set_drvdata(pdev, i2c_pnx);
-
-	if (i2c_pnx->calculate_input_freq)
-		freq_mhz = i2c_pnx->calculate_input_freq(pdev);
-	else {
-		freq_mhz = PNX_DEFAULT_FREQ;
-		dev_info(&pdev->dev, "Setting bus frequency to default value: "
-		       "%d MHz\n", freq_mhz);
+	alg_data = kzalloc(sizeof(*alg_data), GFP_KERNEL);
+	if (!alg_data) {
+		ret = -ENOMEM;
+		goto err_kzalloc;
 	}
 
-	i2c_pnx->adapter->algo = &pnx_algorithm;
+	platform_set_drvdata(pdev, alg_data);
+
+	strlcpy(alg_data->adapter.name, i2c_pnx->name,
+		sizeof(alg_data->adapter.name));
+	alg_data->adapter.dev.parent = &pdev->dev;
+	alg_data->adapter.algo = &pnx_algorithm;
+	alg_data->adapter.algo_data = alg_data;
+	alg_data->adapter.nr = pdev->id;
+	alg_data->i2c_pnx = i2c_pnx;
+
+	alg_data->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(alg_data->clk)) {
+		ret = PTR_ERR(alg_data->clk);
+		goto out_drvdata;
+	}
 
-	alg_data = i2c_pnx->adapter->algo_data;
 	init_timer(&alg_data->mif.timer);
 	alg_data->mif.timer.function = i2c_pnx_timeout;
-	alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
+	alg_data->mif.timer.data = (unsigned long)alg_data;
 
 	/* Register I/O resource */
-	if (!request_mem_region(alg_data->base, I2C_PNX_REGION_SIZE,
+	if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE,
 				pdev->name)) {
 		dev_err(&pdev->dev,
 		       "I/O region 0x%08x for I2C already in use.\n",
-		       alg_data->base);
+		       i2c_pnx->base);
 		ret = -ENODEV;
-		goto out_drvdata;
+		goto out_clkget;
 	}
 
-	if (!(alg_data->ioaddr =
-			(u32)ioremap(alg_data->base, I2C_PNX_REGION_SIZE))) {
+	alg_data->ioaddr = ioremap(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+	if (!alg_data->ioaddr) {
 		dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n");
 		ret = -ENOMEM;
 		goto out_release;
 	}
 
-	i2c_pnx->set_clock_run(pdev);
+	ret = clk_enable(alg_data->clk);
+	if (ret)
+		goto out_unmap;
+
+	freq = clk_get_rate(alg_data->clk);
 
 	/*
 	 * Clock Divisor High This value is the number of system clocks
@@ -620,45 +642,47 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	 * the deglitching filter length.
 	 */
 
-	tmp = ((freq_mhz * 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+	tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
 	iowrite32(tmp, I2C_REG_CKH(alg_data));
 	iowrite32(tmp, I2C_REG_CKL(alg_data));
 
 	iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
 	if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) {
 		ret = -ENODEV;
-		goto out_unmap;
+		goto out_clock;
 	}
 	init_completion(&alg_data->mif.complete);
 
-	ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
-			0, pdev->name, i2c_pnx->adapter);
+	ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt,
+			0, pdev->name, alg_data);
 	if (ret)
 		goto out_clock;
 
 	/* Register this adapter with the I2C subsystem */
-	i2c_pnx->adapter->dev.parent = &pdev->dev;
-	i2c_pnx->adapter->nr = pdev->id;
-	ret = i2c_add_numbered_adapter(i2c_pnx->adapter);
+	ret = i2c_add_numbered_adapter(&alg_data->adapter);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "I2C: Failed to add bus\n");
 		goto out_irq;
 	}
 
 	dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
-	       i2c_pnx->adapter->name, alg_data->base, alg_data->irq);
+	       alg_data->adapter.name, i2c_pnx->base, i2c_pnx->irq);
 
 	return 0;
 
 out_irq:
-	free_irq(alg_data->irq, i2c_pnx->adapter);
+	free_irq(i2c_pnx->irq, alg_data);
 out_clock:
-	i2c_pnx->set_clock_stop(pdev);
+	clk_disable(alg_data->clk);
 out_unmap:
-	iounmap((void *)alg_data->ioaddr);
+	iounmap(alg_data->ioaddr);
 out_release:
-	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
+	release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+out_clkget:
+	clk_put(alg_data->clk);
 out_drvdata:
+	kfree(alg_data);
+err_kzalloc:
 	platform_set_drvdata(pdev, NULL);
 out:
 	return ret;
@@ -666,15 +690,16 @@ out:
 
 static int __devexit i2c_pnx_remove(struct platform_device *pdev)
 {
-	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
-	struct i2c_adapter *adap = i2c_pnx->adapter;
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
-
-	free_irq(alg_data->irq, i2c_pnx->adapter);
-	i2c_del_adapter(adap);
-	i2c_pnx->set_clock_stop(pdev);
-	iounmap((void *)alg_data->ioaddr);
-	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
+	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
+	struct i2c_pnx_data *i2c_pnx = alg_data->i2c_pnx;
+
+	free_irq(i2c_pnx->irq, alg_data);
+	i2c_del_adapter(&alg_data->adapter);
+	clk_disable(alg_data->clk);
+	iounmap(alg_data->ioaddr);
+	release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+	clk_put(alg_data->clk);
+	kfree(alg_data);
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 90d168a..84c103a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -2,6 +2,7 @@
  *  linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver
  *
  *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *  Copyright (C) 2010 ST-Ericsson AB.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -34,9 +35,6 @@
 
 #define DRIVER_NAME "mmci-pl18x"
 
-#define DBG(host,fmt,args...)	\
-	pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args)
-
 static unsigned int fmax = 515633;
 
 /*
@@ -105,8 +103,8 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 	void __iomem *base;
 	int blksz_bits;
 
-	DBG(host, "blksz %04x blks %04x flags %08x\n",
-	    data->blksz, data->blocks, data->flags);
+	dev_dbg(mmc_dev(host->mmc), "blksz %04x blks %04x flags %08x\n",
+		data->blksz, data->blocks, data->flags);
 
 	host->data = data;
 	host->size = data->blksz;
@@ -155,7 +153,7 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
 {
 	void __iomem *base = host->base;
 
-	DBG(host, "op %02x arg %08x flags %08x\n",
+	dev_dbg(mmc_dev(host->mmc), "op %02x arg %08x flags %08x\n",
 	    cmd->opcode, cmd->arg, cmd->flags);
 
 	if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) {
@@ -184,8 +182,20 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 {
 	if (status & MCI_DATABLOCKEND) {
 		host->data_xfered += data->blksz;
+#ifdef CONFIG_ARCH_U300
+		/*
+		 * On the U300 some signal or other is
+		 * badly routed so that a data write does
+		 * not properly terminate with a MCI_DATAEND
+		 * status flag. This quirk will make writes
+		 * work again.
+		 */
+		if (data->flags & MMC_DATA_WRITE)
+			status |= MCI_DATAEND;
+#endif
 	}
 	if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+		dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
 		if (status & MCI_DATACRCFAIL)
 			data->error = -EILSEQ;
 		else if (status & MCI_DATATIMEOUT)
@@ -307,7 +317,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 
 	status = readl(base + MMCISTATUS);
 
-	DBG(host, "irq1 %08x\n", status);
+	dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
 
 	do {
 		unsigned long flags;
@@ -401,7 +411,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
 		status &= readl(host->base + MMCIMASK0);
 		writel(status, host->base + MMCICLEAR);
 
-		DBG(host, "irq0 %08x\n", status);
+		dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
 
 		data = host->data;
 		if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|
@@ -428,8 +438,8 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	WARN_ON(host->mrq != NULL);
 
 	if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
-		printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
-			mmc_hostname(mmc), mrq->data->blksz);
+		dev_err(mmc_dev(mmc), "unsupported block size (%d bytes)\n",
+			mrq->data->blksz);
 		mrq->cmd->error = -EINVAL;
 		mmc_request_done(mmc, mrq);
 		return;
@@ -582,8 +592,8 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 
 	host->hw_designer = amba_manf(dev);
 	host->hw_revision = amba_rev(dev);
-	DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
-	DBG(host, "revision = 0x%01x\n", host->hw_revision);
+	dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
+	dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision);
 
 	host->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(host->clk)) {
@@ -608,7 +618,8 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 		if (ret < 0)
 			goto clk_disable;
 		host->mclk = clk_get_rate(host->clk);
-		DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
+		dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n",
+			host->mclk);
 	}
 	host->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!host->base) {
@@ -619,6 +630,8 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	mmc->ops = &mmci_ops;
 	mmc->f_min = (host->mclk + 511) / 512;
 	mmc->f_max = min(host->mclk, fmax);
+	dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
+
 #ifdef CONFIG_REGULATOR
 	/* If we're using the regulator framework, try to fetch a regulator */
 	host->vcc = regulator_get(&dev->dev, "vmmc");
@@ -712,7 +725,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 
 	mmc_add_host(mmc);
 
-	printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
+	dev_info(&dev->dev, "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
 		mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
 		(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
 
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 0264b11..c256aac 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -7,6 +7,9 @@
  *
  * Copyright 2006 (c) MontaVista Software, Inc.
  *
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * Copyright 2010 (c) ST-Ericsson AB
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -18,6 +21,9 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/io.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/version.h>
 
 /*
  * Register definitions
@@ -30,35 +36,207 @@
 #define	RTC_RIS		0x14	/* Raw interrupt status register */
 #define	RTC_MIS		0x18	/* Masked interrupt status register */
 #define	RTC_ICR		0x1c	/* Interrupt clear register */
+/* ST variants have additional timer functionality */
+#define RTC_TDR		0x20	/* Timer data read register */
+#define RTC_TLR		0x24	/* Timer data load register */
+#define RTC_TCR		0x28	/* Timer control register */
+#define RTC_YDR		0x30	/* Year data read register */
+#define RTC_YMR		0x34	/* Year match register */
+#define RTC_YLR		0x38	/* Year data load register */
+
+#define RTC_CR_CWEN	(1 << 26)	/* Clockwatch enable bit */
+
+#define RTC_TCR_EN	(1 << 1) /* Periodic timer enable bit */
+
+/* Common bit definitions for Interrupt status and control registers */
+#define RTC_BIT_AI	(1 << 0) /* Alarm interrupt bit */
+#define RTC_BIT_PI	(1 << 1) /* Periodic interrupt bit. ST variants only. */
+
+/* Common bit definations for ST v2 for reading/writing time */
+#define RTC_SEC_SHIFT 0
+#define RTC_SEC_MASK (0x3F << RTC_SEC_SHIFT) /* Second [0-59] */
+#define RTC_MIN_SHIFT 6
+#define RTC_MIN_MASK (0x3F << RTC_MIN_SHIFT) /* Minute [0-59] */
+#define RTC_HOUR_SHIFT 12
+#define RTC_HOUR_MASK (0x1F << RTC_HOUR_SHIFT) /* Hour [0-23] */
+#define RTC_WDAY_SHIFT 17
+#define RTC_WDAY_MASK (0x7 << RTC_WDAY_SHIFT) /* Day of Week [1-7] 1=Sunday */
+#define RTC_MDAY_SHIFT 20
+#define RTC_MDAY_MASK (0x1F << RTC_MDAY_SHIFT) /* Day of Month [1-31] */
+#define RTC_MON_SHIFT 25
+#define RTC_MON_MASK (0xF << RTC_MON_SHIFT) /* Month [1-12] 1=January */
+
+#define RTC_TIMER_FREQ 32768
 
 struct pl031_local {
 	struct rtc_device *rtc;
 	void __iomem *base;
+	u8 hw_designer;
+	u8 hw_revision:4;
 };
 
-static irqreturn_t pl031_interrupt(int irq, void *dev_id)
+static int pl031_alarm_irq_enable(struct device *dev,
+	unsigned int enabled)
+{
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+	unsigned long imsc;
+
+	/* Clear any pending alarm interrupts. */
+	writel(RTC_BIT_AI, ldata->base + RTC_ICR);
+
+	imsc = readl(ldata->base + RTC_IMSC);
+
+	if (enabled == 1)
+		writel(imsc | RTC_BIT_AI, ldata->base + RTC_IMSC);
+	else
+		writel(imsc & ~RTC_BIT_AI, ldata->base + RTC_IMSC);
+
+	return 0;
+}
+
+/*
+ * Convert Gregorian date to ST v2 RTC format.
+ */
+static int pl031_stv2_tm_to_time(struct device *dev,
+				 struct rtc_time *tm, unsigned long *st_time,
+	unsigned long *bcd_year)
+{
+	int year = tm->tm_year + 1900;
+	int wday = tm->tm_wday;
+
+	/* wday masking is not working in hardware so wday must be valid */
+	if (wday < -1 || wday > 6) {
+		dev_err(dev, "invalid wday value %d\n", tm->tm_wday);
+		return -EINVAL;
+	} else if (wday == -1) {
+		/* wday is not provided, calculate it here */
+		unsigned long time;
+		struct rtc_time calc_tm;
+
+		rtc_tm_to_time(tm, &time);
+		rtc_time_to_tm(time, &calc_tm);
+		wday = calc_tm.tm_wday;
+	}
+
+	*bcd_year = (bin2bcd(year % 100) | bin2bcd(year / 100) << 8);
+
+	*st_time = ((tm->tm_mon + 1) << RTC_MON_SHIFT)
+			|	(tm->tm_mday << RTC_MDAY_SHIFT)
+			|	((wday + 1) << RTC_WDAY_SHIFT)
+			|	(tm->tm_hour << RTC_HOUR_SHIFT)
+			|	(tm->tm_min << RTC_MIN_SHIFT)
+			|	(tm->tm_sec << RTC_SEC_SHIFT);
+
+	return 0;
+}
+
+/*
+ * Convert ST v2 RTC format to Gregorian date.
+ */
+static int pl031_stv2_time_to_tm(unsigned long st_time, unsigned long bcd_year,
+	struct rtc_time *tm)
+{
+	tm->tm_year = bcd2bin(bcd_year) + (bcd2bin(bcd_year >> 8) * 100);
+	tm->tm_mon  = ((st_time & RTC_MON_MASK) >> RTC_MON_SHIFT) - 1;
+	tm->tm_mday = ((st_time & RTC_MDAY_MASK) >> RTC_MDAY_SHIFT);
+	tm->tm_wday = ((st_time & RTC_WDAY_MASK) >> RTC_WDAY_SHIFT) - 1;
+	tm->tm_hour = ((st_time & RTC_HOUR_MASK) >> RTC_HOUR_SHIFT);
+	tm->tm_min  = ((st_time & RTC_MIN_MASK) >> RTC_MIN_SHIFT);
+	tm->tm_sec  = ((st_time & RTC_SEC_MASK) >> RTC_SEC_SHIFT);
+
+	tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+	tm->tm_year -= 1900;
+
+	return 0;
+}
+
+static int pl031_stv2_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+
+	pl031_stv2_time_to_tm(readl(ldata->base + RTC_DR),
+			readl(ldata->base + RTC_YDR), tm);
+
+	return 0;
+}
+
+static int pl031_stv2_set_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long time;
+	unsigned long bcd_year;
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pl031_stv2_tm_to_time(dev, tm, &time, &bcd_year);
+	if (ret == 0) {
+		writel(bcd_year, ldata->base + RTC_YLR);
+		writel(time, ldata->base + RTC_LR);
+	}
+
+	return ret;
+}
+
+static int pl031_stv2_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
-	struct rtc_device *rtc = dev_id;
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+	int ret;
 
-	rtc_update_irq(rtc, 1, RTC_AF);
+	ret = pl031_stv2_time_to_tm(readl(ldata->base + RTC_MR),
+			readl(ldata->base + RTC_YMR), &alarm->time);
 
-	return IRQ_HANDLED;
+	alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+	alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
+
+	return ret;
 }
 
-static int pl031_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+static int pl031_stv2_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
 	struct pl031_local *ldata = dev_get_drvdata(dev);
+	unsigned long time;
+	unsigned long bcd_year;
+	int ret;
+
+	/* At the moment, we can only deal with non-wildcarded alarm times. */
+	ret = rtc_valid_tm(&alarm->time);
+	if (ret == 0) {
+		ret = pl031_stv2_tm_to_time(dev, &alarm->time,
+					    &time, &bcd_year);
+		if (ret == 0) {
+			writel(bcd_year, ldata->base + RTC_YMR);
+			writel(time, ldata->base + RTC_MR);
+
+			pl031_alarm_irq_enable(dev, alarm->enabled);
+		}
+	}
+
+	return ret;
+}
+
+static irqreturn_t pl031_interrupt(int irq, void *dev_id)
+{
+	struct pl031_local *ldata = dev_id;
+	unsigned long rtcmis;
+	unsigned long events = 0;
+
+	rtcmis = readl(ldata->base + RTC_MIS);
+	if (rtcmis) {
+		writel(rtcmis, ldata->base + RTC_ICR);
+
+		if (rtcmis & RTC_BIT_AI)
+			events |= (RTC_AF | RTC_IRQF);
+
+		/* Timer interrupt is only available in ST variants */
+		if ((rtcmis & RTC_BIT_PI) &&
+			(ldata->hw_designer == AMBA_VENDOR_ST))
+			events |= (RTC_PF | RTC_IRQF);
+
+		rtc_update_irq(ldata->rtc, 1, events);
 
-	switch (cmd) {
-	case RTC_AIE_OFF:
-		writel(1, ldata->base + RTC_MIS);
-		return 0;
-	case RTC_AIE_ON:
-		writel(0, ldata->base + RTC_MIS);
-		return 0;
+		return IRQ_HANDLED;
 	}
 
-	return -ENOIOCTLCMD;
+	return IRQ_NONE;
 }
 
 static int pl031_read_time(struct device *dev, struct rtc_time *tm)
@@ -74,11 +252,14 @@ static int pl031_set_time(struct device *dev, struct rtc_time *tm)
 {
 	unsigned long time;
 	struct pl031_local *ldata = dev_get_drvdata(dev);
+	int ret;
 
-	rtc_tm_to_time(tm, &time);
-	writel(time, ldata->base + RTC_LR);
+	ret = rtc_tm_to_time(tm, &time);
 
-	return 0;
+	if (ret == 0)
+		writel(time, ldata->base + RTC_LR);
+
+	return ret;
 }
 
 static int pl031_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
@@ -86,8 +267,9 @@ static int pl031_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	struct pl031_local *ldata = dev_get_drvdata(dev);
 
 	rtc_time_to_tm(readl(ldata->base + RTC_MR), &alarm->time);
-	alarm->pending = readl(ldata->base + RTC_RIS);
-	alarm->enabled = readl(ldata->base + RTC_IMSC);
+
+	alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+	alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
 
 	return 0;
 }
@@ -96,22 +278,71 @@ static int pl031_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
 	struct pl031_local *ldata = dev_get_drvdata(dev);
 	unsigned long time;
+	int ret;
+
+	/* At the moment, we can only deal with non-wildcarded alarm times. */
+	ret = rtc_valid_tm(&alarm->time);
+	if (ret == 0) {
+		ret = rtc_tm_to_time(&alarm->time, &time);
+		if (ret == 0) {
+			writel(time, ldata->base + RTC_MR);
+			pl031_alarm_irq_enable(dev, alarm->enabled);
+		}
+	}
+
+	return ret;
+}
+
+/* Periodic interrupt is only available in ST variants. */
+static int pl031_irq_set_state(struct device *dev, int enabled)
+{
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+
+	if (enabled == 1) {
+		/* Clear any pending timer interrupt. */
+		writel(RTC_BIT_PI, ldata->base + RTC_ICR);
+
+		writel(readl(ldata->base + RTC_IMSC) | RTC_BIT_PI,
+			ldata->base + RTC_IMSC);
 
-	rtc_tm_to_time(&alarm->time, &time);
+		/* Now start the timer */
+		writel(readl(ldata->base + RTC_TCR) | RTC_TCR_EN,
+			ldata->base + RTC_TCR);
 
-	writel(time, ldata->base + RTC_MR);
-	writel(!alarm->enabled, ldata->base + RTC_MIS);
+	} else {
+		writel(readl(ldata->base + RTC_IMSC) & (~RTC_BIT_PI),
+			ldata->base + RTC_IMSC);
+
+		/* Also stop the timer */
+		writel(readl(ldata->base + RTC_TCR) & (~RTC_TCR_EN),
+			ldata->base + RTC_TCR);
+	}
+	/* Wait at least 1 RTC32 clock cycle to ensure next access
+	 * to RTC_TCR will succeed.
+	 */
+	udelay(40);
 
 	return 0;
 }
 
-static const struct rtc_class_ops pl031_ops = {
-	.ioctl = pl031_ioctl,
-	.read_time = pl031_read_time,
-	.set_time = pl031_set_time,
-	.read_alarm = pl031_read_alarm,
-	.set_alarm = pl031_set_alarm,
-};
+static int pl031_irq_set_freq(struct device *dev, int freq)
+{
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+
+	/* Cant set timer if it is already enabled */
+	if (readl(ldata->base + RTC_TCR) & RTC_TCR_EN) {
+		dev_err(dev, "can't change frequency while timer enabled\n");
+		return -EINVAL;
+	}
+
+	/* If self start bit in RTC_TCR is set timer will start here,
+	 * but we never set that bit. Instead we start the timer when
+	 * set_state is called with enabled == 1.
+	 */
+	writel(RTC_TIMER_FREQ / freq, ldata->base + RTC_TLR);
+
+	return 0;
+}
 
 static int pl031_remove(struct amba_device *adev)
 {
@@ -131,18 +362,20 @@ static int pl031_probe(struct amba_device *adev, struct amba_id *id)
 {
 	int ret;
 	struct pl031_local *ldata;
+	struct rtc_class_ops *ops = id->data;
 
 	ret = amba_request_regions(adev, NULL);
 	if (ret)
 		goto err_req;
 
-	ldata = kmalloc(sizeof(struct pl031_local), GFP_KERNEL);
+	ldata = kzalloc(sizeof(struct pl031_local), GFP_KERNEL);
 	if (!ldata) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
 	ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
+
 	if (!ldata->base) {
 		ret = -ENOMEM;
 		goto out_no_remap;
@@ -150,24 +383,36 @@ static int pl031_probe(struct amba_device *adev, struct amba_id *id)
 
 	amba_set_drvdata(adev, ldata);
 
-	if (request_irq(adev->irq[0], pl031_interrupt, IRQF_DISABLED,
-			"rtc-pl031", ldata->rtc)) {
-		ret = -EIO;
-		goto out_no_irq;
-	}
+	ldata->hw_designer = amba_manf(adev);
+	ldata->hw_revision = amba_rev(adev);
+
+	dev_dbg(&adev->dev, "designer ID = 0x%02x\n", ldata->hw_designer);
+	dev_dbg(&adev->dev, "revision = 0x%01x\n", ldata->hw_revision);
 
-	ldata->rtc = rtc_device_register("pl031", &adev->dev, &pl031_ops,
-					 THIS_MODULE);
+	/* Enable the clockwatch on ST Variants */
+	if ((ldata->hw_designer == AMBA_VENDOR_ST) &&
+	    (ldata->hw_revision > 1))
+		writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN,
+		       ldata->base + RTC_CR);
+
+	ldata->rtc = rtc_device_register("pl031", &adev->dev, ops,
+					THIS_MODULE);
 	if (IS_ERR(ldata->rtc)) {
 		ret = PTR_ERR(ldata->rtc);
 		goto out_no_rtc;
 	}
 
+	if (request_irq(adev->irq[0], pl031_interrupt,
+			IRQF_DISABLED | IRQF_SHARED, "rtc-pl031", ldata)) {
+		ret = -EIO;
+		goto out_no_irq;
+	}
+
 	return 0;
 
-out_no_rtc:
-	free_irq(adev->irq[0], ldata->rtc);
 out_no_irq:
+	rtc_device_unregister(ldata->rtc);
+out_no_rtc:
 	iounmap(ldata->base);
 	amba_set_drvdata(adev, NULL);
 out_no_remap:
@@ -175,13 +420,57 @@ out_no_remap:
 out:
 	amba_release_regions(adev);
 err_req:
+
 	return ret;
 }
 
+/* Operations for the original ARM version */
+static struct rtc_class_ops arm_pl031_ops = {
+	.read_time = pl031_read_time,
+	.set_time = pl031_set_time,
+	.read_alarm = pl031_read_alarm,
+	.set_alarm = pl031_set_alarm,
+	.alarm_irq_enable = pl031_alarm_irq_enable,
+};
+
+/* The First ST derivative */
+static struct rtc_class_ops stv1_pl031_ops = {
+	.read_time = pl031_read_time,
+	.set_time = pl031_set_time,
+	.read_alarm = pl031_read_alarm,
+	.set_alarm = pl031_set_alarm,
+	.alarm_irq_enable = pl031_alarm_irq_enable,
+	.irq_set_state = pl031_irq_set_state,
+	.irq_set_freq = pl031_irq_set_freq,
+};
+
+/* And the second ST derivative */
+static struct rtc_class_ops stv2_pl031_ops = {
+	.read_time = pl031_stv2_read_time,
+	.set_time = pl031_stv2_set_time,
+	.read_alarm = pl031_stv2_read_alarm,
+	.set_alarm = pl031_stv2_set_alarm,
+	.alarm_irq_enable = pl031_alarm_irq_enable,
+	.irq_set_state = pl031_irq_set_state,
+	.irq_set_freq = pl031_irq_set_freq,
+};
+
 static struct amba_id pl031_ids[] __initdata = {
 	{
 		.id = 0x00041031,
 		.mask = 0x000fffff,
+		.data = &arm_pl031_ops,
+	},
+	/* ST Micro variants */
+	{
+		.id = 0x00180031,
+		.mask = 0x00ffffff,
+		.data = &stv1_pl031_ops,
+	},
+	{
+		.id = 0x00280031,
+		.mask = 0x00ffffff,
+		.data = &stv2_pl031_ops,
 	},
 	{0, 0},
 };
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index ef7adc8..ce6c353 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -71,6 +71,7 @@ struct uart_amba_port {
 	unsigned int		im;	/* interrupt mask */
 	unsigned int		old_status;
 	unsigned int		ifls;	/* vendor-specific */
+	bool			autorts;
 };
 
 /* There is by now at least one vendor with differing details, so handle it */
@@ -308,6 +309,11 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1);
 	TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
 	TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
+
+	if (uap->autorts) {
+		/* We need to disable auto-RTS if we want to turn RTS off */
+		TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN);
+	}
 #undef TIOCMBIT
 
 	writew(cr, uap->port.membase + UART011_CR);
@@ -437,6 +443,7 @@ static void pl011_shutdown(struct uart_port *port)
 	/*
 	 * disable the port
 	 */
+	uap->autorts = false;
 	writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
 
 	/*
@@ -456,6 +463,7 @@ static void
 pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 		     struct ktermios *old)
 {
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 	unsigned int lcr_h, old_cr;
 	unsigned long flags;
 	unsigned int baud, quot;
@@ -532,6 +540,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	old_cr = readw(port->membase + UART011_CR);
 	writew(0, port->membase + UART011_CR);
 
+	if (termios->c_cflag & CRTSCTS) {
+		if (old_cr & UART011_CR_RTS)
+			old_cr |= UART011_CR_RTSEN;
+
+		old_cr |= UART011_CR_CTSEN;
+		uap->autorts = true;
+	} else {
+		old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN);
+		uap->autorts = false;
+	}
+
 	/* Set baud rate */
 	writew(quot & 0x3f, port->membase + UART011_FBRD);
 	writew(quot >> 6, port->membase + UART011_IBRD);
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index ff5bbb9..9aeb681 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -363,6 +363,7 @@ struct pl022 {
 	void				*rx_end;
 	enum ssp_reading		read;
 	enum ssp_writing		write;
+	u32				exp_fifo_level;
 };
 
 /**
@@ -501,6 +502,9 @@ static int flush(struct pl022 *pl022)
 		while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
 			readw(SSP_DR(pl022->virtbase));
 	} while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
+
+	pl022->exp_fifo_level = 0;
+
 	return limit;
 }
 
@@ -583,10 +587,9 @@ static void readwriter(struct pl022 *pl022)
 	 * errons in 8bit wide transfers on ARM variants (just 8 words
 	 * FIFO, means only 8x8 = 64 bits in FIFO) at least.
 	 *
-	 * FIXME: currently we have no logic to account for this.
-	 * perhaps there is even something broken in HW regarding
-	 * 8bit transfers (it doesn't fail on 16bit) so this needs
-	 * more investigation...
+	 * To prevent this issue, the TX FIFO is only filled to the
+	 * unused RX FIFO fill length, regardless of what the TX
+	 * FIFO status flag indicates.
 	 */
 	dev_dbg(&pl022->adev->dev,
 		"%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
@@ -613,11 +616,12 @@ static void readwriter(struct pl022 *pl022)
 			break;
 		}
 		pl022->rx += (pl022->cur_chip->n_bytes);
+		pl022->exp_fifo_level--;
 	}
 	/*
-	 * Write as much as you can, while keeping an eye on the RX FIFO!
+	 * Write as much as possible up to the RX FIFO size
 	 */
-	while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+	while ((pl022->exp_fifo_level < pl022->vendor->fifodepth)
 	       && (pl022->tx < pl022->tx_end)) {
 		switch (pl022->write) {
 		case WRITING_NULL:
@@ -634,6 +638,7 @@ static void readwriter(struct pl022 *pl022)
 			break;
 		}
 		pl022->tx += (pl022->cur_chip->n_bytes);
+		pl022->exp_fifo_level++;
 		/*
 		 * This inner reader takes care of things appearing in the RX
 		 * FIFO as we're transmitting. This will happen a lot since the
@@ -660,6 +665,7 @@ static void readwriter(struct pl022 *pl022)
 				break;
 			}
 			pl022->rx += (pl022->cur_chip->n_bytes);
+			pl022->exp_fifo_level--;
 		}
 	}
 	/*
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 430a584..c7a9479 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -96,9 +96,6 @@ static void wdt_enable(void)
 {
 	spin_lock(&io_lock);
 
-	if (wdt_clk)
-		clk_set_rate(wdt_clk, 1);
-
 	/* stop counter, initiate counter reset */
 	__raw_writel(RESET_COUNT, WDTIM_CTRL(wdt_base));
 	/*wait for reset to complete. 100% guarantee event */
@@ -125,19 +122,25 @@ static void wdt_disable(void)
 	spin_lock(&io_lock);
 
 	__raw_writel(0, WDTIM_CTRL(wdt_base));	/*stop counter */
-	if (wdt_clk)
-		clk_set_rate(wdt_clk, 0);
 
 	spin_unlock(&io_lock);
 }
 
 static int pnx4008_wdt_open(struct inode *inode, struct file *file)
 {
+	int ret;
+
 	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
 		return -EBUSY;
 
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
 
+	ret = clk_enable(wdt_clk);
+	if (ret) {
+		clear_bit(WDT_IN_USE, &wdt_status);
+		return ret;
+	}
+
 	wdt_enable();
 
 	return nonseekable_open(inode, file);
@@ -225,6 +228,7 @@ static int pnx4008_wdt_release(struct inode *inode, struct file *file)
 		printk(KERN_WARNING "WATCHDOG: Device closed unexpectdly\n");
 
 	wdt_disable();
+	clk_disable(wdt_clk);
 	clear_bit(WDT_IN_USE, &wdt_status);
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
 
@@ -273,25 +277,33 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev)
 	}
 	wdt_base = (void __iomem *)IO_ADDRESS(res->start);
 
-	wdt_clk = clk_get(&pdev->dev, "wdt_ck");
+	wdt_clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(wdt_clk)) {
 		ret = PTR_ERR(wdt_clk);
 		release_resource(wdt_mem);
 		kfree(wdt_mem);
 		goto out;
-	} else
-		clk_set_rate(wdt_clk, 1);
+	}
+
+	ret = clk_enable(wdt_clk);
+	if (ret) {
+		release_resource(wdt_mem);
+		kfree(wdt_mem);
+		goto out;
+	}
 
 	ret = misc_register(&pnx4008_wdt_miscdev);
 	if (ret < 0) {
 		printk(KERN_ERR MODULE_NAME "cannot register misc device\n");
 		release_resource(wdt_mem);
 		kfree(wdt_mem);
-		clk_set_rate(wdt_clk, 0);
+		clk_disable(wdt_clk);
+		clk_put(wdt_clk);
 	} else {
 		boot_status = (__raw_readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ?
 		    WDIOF_CARDRESET : 0;
 		wdt_disable();		/*disable for now */
+		clk_disable(wdt_clk);
 		set_bit(WDT_DEVICE_INITED, &wdt_status);
 	}
 
@@ -302,11 +314,10 @@ out:
 static int __devexit pnx4008_wdt_remove(struct platform_device *pdev)
 {
 	misc_deregister(&pnx4008_wdt_miscdev);
-	if (wdt_clk) {
-		clk_set_rate(wdt_clk, 0);
-		clk_put(wdt_clk);
-		wdt_clk = NULL;
-	}
+
+	clk_disable(wdt_clk);
+	clk_put(wdt_clk);
+
 	if (wdt_mem) {
 		release_resource(wdt_mem);
 		kfree(wdt_mem);