summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorEzequiel Garcia <ezequiel.garcia@free-electrons.com>2014-05-24 15:24:51 -0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-05-28 12:30:48 -0700
commitfeb5814254094c306429fe6d7b9c534fa0250f4c (patch)
tree038641e4554a574f315bdc5edb70e1d358d8279b /drivers
parentc67f866dbb9b36593d0f6af177e99047ecebf95a (diff)
downloadop-kernel-dev-feb5814254094c306429fe6d7b9c534fa0250f4c.zip
op-kernel-dev-feb5814254094c306429fe6d7b9c534fa0250f4c.tar.gz
parport: Add support for the WCH353 1S/1P multi-IO card
This Multi-IO card has one serial 16550-like and one parallel port connector. Here's the lspci output, after this commit is applied: 03:07.0 Serial controller: Device 4348:5053 (rev 10) (prog-if 02 [16550]) Subsystem: Device 4348:5053 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at cf00 [size=8] Region 1: I/O ports at ce00 [size=8] Kernel driver in use: parport_serial Kernel modules: 8250_pci, parport_serial This commit adds an entry with the device ID to the blacklist declared in 8250_pci to prevent the driver from taking ownership. Also, and as was done for the 2S/1P variant, add a quirk to skip autodetection and set the correct type to 16550A clone. Proper entries are added to parport_serial, to support the device parallel and serial ports. Cc: Gianluca Anzolin <gianluca@sottospazio.it> Cc: Alan Cox <alan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/parport/parport_serial.c9
-rw-r--r--drivers/tty/serial/8250/8250_pci.c10
2 files changed, 19 insertions, 0 deletions
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index ff53314..ee93200 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -62,6 +62,7 @@ enum parport_pc_pci_cards {
timedia_9079a,
timedia_9079b,
timedia_9079c,
+ wch_ch353_1s1p,
wch_ch353_2s1p,
sunix_2s1p,
};
@@ -148,6 +149,7 @@ static struct parport_pc_pci cards[] = {
/* timedia_9079a */ { 1, { { 2, 3 }, } },
/* timedia_9079b */ { 1, { { 2, 3 }, } },
/* timedia_9079c */ { 1, { { 2, 3 }, } },
+ /* wch_ch353_1s1p*/ { 1, { { 1, -1}, } },
/* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
/* sunix_2s1p */ { 1, { { 3, -1 }, } },
};
@@ -253,6 +255,7 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
{ 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
/* WCH CARDS */
+ { 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p},
{ 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
/*
@@ -479,6 +482,12 @@ static struct pciserial_board pci_parport_serial_boards[] = {
.base_baud = 921600,
.uart_offset = 8,
},
+ [wch_ch353_1s1p] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
[wch_ch353_2s1p] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 2,
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index b14bcba..f35a85f 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1778,6 +1778,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253
#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
+#define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053
#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
#define PCI_VENDOR_ID_AGESTAR 0x5372
#define PCI_DEVICE_ID_AGESTAR_9375 0x6872
@@ -2410,6 +2411,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = pci_omegapci_setup,
},
+ /* WCH CH353 1S1P card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_1S1P,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
/* WCH CH353 2S1P card (16550 clone) */
{
.vendor = PCI_VENDOR_ID_WCH,
@@ -3526,6 +3535,7 @@ static const struct pci_device_id blacklist[] = {
/* multi-io cards handled by parport_serial */
{ PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
+ { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
};
/*
OpenPOWER on IntegriCloud