Merge /spare/repo/linux-2.6/

121 files changed, 3026 insertions, 2079 deletions

diff --git a/drivers/acorn/block/fd1772.c b/drivers/acorn/block/fd1772.c
index 3cd2e96..c0a37d9 100644
--- a/drivers/acorn/block/fd1772.c
+++ b/drivers/acorn/block/fd1772.c
@@ -1283,8 +1283,7 @@ static void do_fd_request(request_queue_t* q)
 	if (fdc_busy) return;
 	save_flags(flags);
 	cli();
-	while (fdc_busy)
-		sleep_on(&fdc_wait);
+	wait_event(fdc_wait, !fdc_busy);
 	fdc_busy = 1;
 	ENABLE_IRQ();
 	restore_flags(flags);
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 986410e..ba13896 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -133,9 +133,10 @@ config ACPI_HOTKEY
 	depends on ACPI_INTERPRETER
 	depends on EXPERIMENTAL
 	depends on !IA64_SGI_SN
-	default m
+	default n
 	help
-	ACPI generic hotkey
+	  Experimental consolidated hotkey driver.
+	  If you are unsure, say N.
 
 config ACPI_FAN
 	tristate "Fan"
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 0f45d45..8162fd0 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -26,6 +26,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
@@ -33,6 +36,9 @@
 #define ACPI_BUTTON_COMPONENT		0x00080000
 #define ACPI_BUTTON_DRIVER_NAME		"ACPI Button Driver"
 #define ACPI_BUTTON_CLASS		"button"
+#define ACPI_BUTTON_FILE_INFO		"info"
+#define ACPI_BUTTON_FILE_STATE		"state"
+#define ACPI_BUTTON_TYPE_UNKNOWN	0x00
 #define ACPI_BUTTON_NOTIFY_STATUS	0x80
 
 #define ACPI_BUTTON_SUBCLASS_POWER	"power"
@@ -64,6 +70,8 @@ MODULE_LICENSE("GPL");
 
 static int acpi_button_add (struct acpi_device *device);
 static int acpi_button_remove (struct acpi_device *device, int type);
+static int acpi_button_info_open_fs(struct inode *inode, struct file *file);
+static int acpi_button_state_open_fs(struct inode *inode, struct file *file);
 
 static struct acpi_driver acpi_button_driver = {
 	.name =		ACPI_BUTTON_DRIVER_NAME,
@@ -82,6 +90,179 @@ struct acpi_button {
 	unsigned long		pushed;
 };
 
+static struct file_operations acpi_button_info_fops = {
+	.open		= acpi_button_info_open_fs,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static struct file_operations acpi_button_state_fops = {
+	.open		= acpi_button_state_open_fs,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+/* --------------------------------------------------------------------------
+                              FS Interface (/proc)
+   -------------------------------------------------------------------------- */
+
+static struct proc_dir_entry	*acpi_button_dir;
+
+static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
+{
+	struct acpi_button	*button = (struct acpi_button *) seq->private;
+
+	ACPI_FUNCTION_TRACE("acpi_button_info_seq_show");
+
+	if (!button || !button->device)
+		return_VALUE(0);
+
+	seq_printf(seq, "type:                    %s\n", 
+		acpi_device_name(button->device));
+
+	return_VALUE(0);
+}
+
+static int acpi_button_info_open_fs(struct inode *inode, struct file *file)
+{
+	return single_open(file, acpi_button_info_seq_show, PDE(inode)->data);
+}
+	
+static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
+{
+	struct acpi_button	*button = (struct acpi_button *) seq->private;
+	acpi_status		status;
+	unsigned long		state;
+
+	ACPI_FUNCTION_TRACE("acpi_button_state_seq_show");
+
+	if (!button || !button->device)
+		return_VALUE(0);
+
+	status = acpi_evaluate_integer(button->handle,"_LID",NULL,&state);
+	if (ACPI_FAILURE(status)) {
+		seq_printf(seq, "state:      unsupported\n");
+	}
+	else{
+		seq_printf(seq, "state:      %s\n", (state ? "open" : "closed")); 
+	}
+
+	return_VALUE(0);
+}
+
+static int acpi_button_state_open_fs(struct inode *inode, struct file *file)
+{
+	return single_open(file, acpi_button_state_seq_show, PDE(inode)->data);
+}
+
+static struct proc_dir_entry *acpi_power_dir;
+static struct proc_dir_entry *acpi_sleep_dir;
+static struct proc_dir_entry *acpi_lid_dir;
+
+static int
+acpi_button_add_fs (
+	struct acpi_device	*device)
+{
+	struct proc_dir_entry	*entry = NULL;
+	struct acpi_button	*button = NULL;
+
+	ACPI_FUNCTION_TRACE("acpi_button_add_fs");
+
+	if (!device || !acpi_driver_data(device))
+		return_VALUE(-EINVAL);
+
+	button = acpi_driver_data(device);
+
+	switch (button->type) {
+	case ACPI_BUTTON_TYPE_POWER:
+	case ACPI_BUTTON_TYPE_POWERF:
+		if (!acpi_power_dir)
+			acpi_power_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_POWER, 
+				acpi_button_dir);
+		entry = acpi_power_dir;
+		break;
+	case ACPI_BUTTON_TYPE_SLEEP:
+	case ACPI_BUTTON_TYPE_SLEEPF:
+		if (!acpi_sleep_dir)
+			acpi_sleep_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_SLEEP, 
+				acpi_button_dir);
+		entry = acpi_sleep_dir;
+		break;
+	case ACPI_BUTTON_TYPE_LID:
+		if (!acpi_lid_dir)
+			acpi_lid_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_LID, 
+				acpi_button_dir);
+		entry = acpi_lid_dir;
+		break;
+	}
+
+	if (!entry)
+		return_VALUE(-ENODEV);
+	entry->owner = THIS_MODULE;
+
+	acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), entry);
+	if (!acpi_device_dir(device))
+		return_VALUE(-ENODEV);
+	acpi_device_dir(device)->owner = THIS_MODULE;
+
+	/* 'info' [R] */
+	entry = create_proc_entry(ACPI_BUTTON_FILE_INFO,
+		S_IRUGO, acpi_device_dir(device));
+	if (!entry)
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+			"Unable to create '%s' fs entry\n",
+			ACPI_BUTTON_FILE_INFO));
+	else {
+		entry->proc_fops = &acpi_button_info_fops;
+		entry->data = acpi_driver_data(device);
+		entry->owner = THIS_MODULE;
+	}
+
+	/* show lid state [R] */
+	if (button->type == ACPI_BUTTON_TYPE_LID) {
+		entry = create_proc_entry(ACPI_BUTTON_FILE_STATE,
+			S_IRUGO, acpi_device_dir(device));
+		if (!entry)
+			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				"Unable to create '%s' fs entry\n",
+				ACPI_BUTTON_FILE_INFO));
+		else {
+			entry->proc_fops = &acpi_button_state_fops;
+			entry->data = acpi_driver_data(device);
+			entry->owner = THIS_MODULE;
+		}
+	}
+
+	return_VALUE(0);
+}
+
+
+static int
+acpi_button_remove_fs (
+	struct acpi_device	*device)
+{
+	struct acpi_button	*button = NULL;
+
+	ACPI_FUNCTION_TRACE("acpi_button_remove_fs");
+
+	button = acpi_driver_data(device);
+	if (acpi_device_dir(device)) {
+		if (button->type == ACPI_BUTTON_TYPE_LID)
+			remove_proc_entry(ACPI_BUTTON_FILE_STATE,
+					     acpi_device_dir(device));
+		remove_proc_entry(ACPI_BUTTON_FILE_INFO,
+				     acpi_device_dir(device));
+
+		remove_proc_entry(acpi_device_bid(device),
+				     acpi_device_dir(device)->parent);
+		acpi_device_dir(device) = NULL;
+	}
+
+	return_VALUE(0);
+}
+
+
 /* --------------------------------------------------------------------------
                                 Driver Interface
    -------------------------------------------------------------------------- */
@@ -121,7 +302,8 @@ acpi_button_notify_fixed (
 	
 	ACPI_FUNCTION_TRACE("acpi_button_notify_fixed");
 
-	BUG_ON(!button);
+	if (!button)
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
 
 	acpi_button_notify(button->handle, ACPI_BUTTON_NOTIFY_STATUS, button);
 
@@ -197,6 +379,10 @@ acpi_button_add (
 		goto end;
 	}
 
+	result = acpi_button_add_fs(device);
+	if (result)
+		goto end;
+
 	switch (button->type) {
 	case ACPI_BUTTON_TYPE_POWERF:
 		status = acpi_install_fixed_event_handler (
@@ -240,6 +426,7 @@ acpi_button_add (
 
 end:
 	if (result) {
+		acpi_button_remove_fs(device);
 		kfree(button);
 	}
 
@@ -280,6 +467,8 @@ acpi_button_remove (struct acpi_device *device, int type)
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 			"Error removing notify handler\n"));
 
+	acpi_button_remove_fs(device);	
+
 	kfree(button);
 
 	return_VALUE(0);
@@ -293,14 +482,20 @@ acpi_button_init (void)
 
 	ACPI_FUNCTION_TRACE("acpi_button_init");
 
+	acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
+	if (!acpi_button_dir)
+		return_VALUE(-ENODEV);
+	acpi_button_dir->owner = THIS_MODULE;
 	result = acpi_bus_register_driver(&acpi_button_driver);
 	if (result < 0) {
+		remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
 		return_VALUE(-ENODEV);
 	}
 
 	return_VALUE(0);
 }
 
+
 static void __exit
 acpi_button_exit (void)
 {
@@ -308,8 +503,17 @@ acpi_button_exit (void)
 
 	acpi_bus_unregister_driver(&acpi_button_driver);
 
+	if (acpi_power_dir) 
+		remove_proc_entry(ACPI_BUTTON_SUBCLASS_POWER, acpi_button_dir);
+	if (acpi_sleep_dir)
+		remove_proc_entry(ACPI_BUTTON_SUBCLASS_SLEEP, acpi_button_dir);
+	if (acpi_lid_dir)
+		remove_proc_entry(ACPI_BUTTON_SUBCLASS_LID, acpi_button_dir);
+	remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
+
 	return_VOID;
 }
 
+
 module_init(acpi_button_init);
 module_exit(acpi_button_exit);
diff --git a/drivers/acpi/dispatcher/dswload.c b/drivers/acpi/dispatcher/dswload.c
index 1ac197c..d116200 100644
--- a/drivers/acpi/dispatcher/dswload.c
+++ b/drivers/acpi/dispatcher/dswload.c
@@ -491,12 +491,6 @@ acpi_ds_load2_begin_op (
 		if ((!(walk_state->op_info->flags & AML_NSOPCODE) &&
 			  (walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
 			(!(walk_state->op_info->flags & AML_NAMED))) {
-			if ((walk_state->op_info->class == AML_CLASS_EXECUTE) ||
-				(walk_state->op_info->class == AML_CLASS_CONTROL)) {
-				ACPI_REPORT_WARNING ((
-					"Encountered executable code at module level, [%s]\n",
-					acpi_ps_get_opcode_name (walk_state->opcode)));
-			}
 			return_ACPI_STATUS (AE_OK);
 		}
 
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index fca4140..1ac5731 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -59,76 +59,186 @@ ACPI_MODULE_NAME		("acpi_ec")
 #define ACPI_EC_DELAY		50	/* Wait 50ms max. during EC ops */
 #define ACPI_EC_UDELAY_GLK	1000	/* Wait 1ms max. to get global lock */
 
+#define ACPI_EC_UDELAY         100     /* Poll @ 100us increments */
+#define ACPI_EC_UDELAY_COUNT   1000    /* Wait 10ms max. during EC ops */
+
 #define ACPI_EC_COMMAND_READ	0x80
 #define ACPI_EC_COMMAND_WRITE	0x81
 #define ACPI_EC_BURST_ENABLE	0x82
 #define ACPI_EC_BURST_DISABLE	0x83
 #define ACPI_EC_COMMAND_QUERY	0x84
 
-static int acpi_ec_add (struct acpi_device *device);
+#define EC_POLLING		0xFF
+#define EC_BURST		0x00
+
+
 static int acpi_ec_remove (struct acpi_device *device, int type);
 static int acpi_ec_start (struct acpi_device *device);
 static int acpi_ec_stop (struct acpi_device *device, int type);
+static int acpi_ec_burst_add ( struct acpi_device *device);
+static int acpi_ec_polling_add ( struct acpi_device	*device);
 
 static struct acpi_driver acpi_ec_driver = {
 	.name =		ACPI_EC_DRIVER_NAME,
 	.class =	ACPI_EC_CLASS,
 	.ids =		ACPI_EC_HID,
 	.ops =		{
-				.add =		acpi_ec_add,
+				.add =		acpi_ec_polling_add,
 				.remove =	acpi_ec_remove,
 				.start =	acpi_ec_start,
 				.stop =		acpi_ec_stop,
 			},
 };
-
-struct acpi_ec {
-	acpi_handle			handle;
-	unsigned long			uid;
-	unsigned long			gpe_bit;
-	struct acpi_generic_address	status_addr;
-	struct acpi_generic_address	command_addr;
-	struct acpi_generic_address	data_addr;
-	unsigned long			global_lock;
-	unsigned int			expect_event;
-	atomic_t			leaving_burst; /* 0 : No, 1 : Yes, 2: abort*/
-	atomic_t			pending_gpe;
-	struct semaphore		sem;
-	wait_queue_head_t		wait;
+union acpi_ec {
+	struct {
+		u32				mode;
+		acpi_handle			handle;
+		unsigned long			uid;
+		unsigned long			gpe_bit;
+		struct acpi_generic_address	status_addr;
+		struct acpi_generic_address	command_addr;
+		struct acpi_generic_address	data_addr;
+		unsigned long			global_lock;
+	} common;
+
+	struct {
+		u32				mode;
+		acpi_handle			handle;
+		unsigned long			uid;
+		unsigned long			gpe_bit;
+		struct acpi_generic_address	status_addr;
+		struct acpi_generic_address	command_addr;
+		struct acpi_generic_address	data_addr;
+		unsigned long			global_lock;
+		unsigned int			expect_event;
+		atomic_t			leaving_burst; /* 0 : No, 1 : Yes, 2: abort*/
+		atomic_t			pending_gpe;
+		struct semaphore		sem;
+		wait_queue_head_t		wait;
+	}burst;
+
+	struct {
+		u32				mode;
+		acpi_handle			handle;
+		unsigned long			uid;
+		unsigned long			gpe_bit;
+		struct acpi_generic_address	status_addr;
+		struct acpi_generic_address	command_addr;
+		struct acpi_generic_address	data_addr;
+		unsigned long			global_lock;
+       		spinlock_t                      lock;
+	}polling;
 };
 
+static int acpi_ec_polling_wait ( union acpi_ec *ec, u8 event); 
+static int acpi_ec_burst_wait(union acpi_ec *ec, unsigned int event);
+static int acpi_ec_polling_read ( union acpi_ec *ec, u8 address, u32 *data);
+static int acpi_ec_burst_read( union acpi_ec *ec, u8 address, u32 *data);
+static int acpi_ec_polling_write ( union acpi_ec *ec, u8 address, u8 data);
+static int acpi_ec_burst_write ( union acpi_ec *ec, u8 address, u8 data);
+static int acpi_ec_polling_query ( union acpi_ec *ec, u32 *data);
+static int acpi_ec_burst_query ( union acpi_ec *ec, u32 *data);
+static void acpi_ec_gpe_polling_query ( void *ec_cxt);
+static void acpi_ec_gpe_burst_query ( void *ec_cxt);
+static u32 acpi_ec_gpe_polling_handler ( void *data);
+static u32 acpi_ec_gpe_burst_handler ( void *data);
+static acpi_status __init
+acpi_fake_ecdt_polling_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval);
+
+static acpi_status __init
+acpi_fake_ecdt_burst_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval);
+
+static int __init
+acpi_ec_polling_get_real_ecdt(void);
+static int __init
+acpi_ec_burst_get_real_ecdt(void);
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
-static struct acpi_ec	*ec_ecdt;
+static union acpi_ec	*ec_ecdt;
 
 /* External interfaces use first EC only, so remember */
 static struct acpi_device *first_ec;
+static int acpi_ec_polling_mode = EC_POLLING;
 
 /* --------------------------------------------------------------------------
                              Transaction Management
    -------------------------------------------------------------------------- */
 
-static inline u32 acpi_ec_read_status(struct acpi_ec *ec)
+static inline u32 acpi_ec_read_status(union acpi_ec *ec)
 {
 	u32	status = 0;
 
-	acpi_hw_low_level_read(8, &status, &ec->status_addr);
+	acpi_hw_low_level_read(8, &status, &ec->common.status_addr);
 	return status;
 }
 
-static int acpi_ec_wait(struct acpi_ec *ec, unsigned int event)
+static int
+acpi_ec_wait (
+	union acpi_ec		*ec,
+	u8			event)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_wait (ec, event);
+	else
+		return acpi_ec_burst_wait (ec, event);
+}
+
+static int
+acpi_ec_polling_wait (
+	union acpi_ec		*ec,
+	u8			event)
+{
+	u32			acpi_ec_status = 0;
+	u32			i = ACPI_EC_UDELAY_COUNT;
+
+	if (!ec)
+		return -EINVAL;
+
+	/* Poll the EC status register waiting for the event to occur. */
+	switch (event) {
+	case ACPI_EC_EVENT_OBF:
+		do {
+			acpi_hw_low_level_read(8, &acpi_ec_status, &ec->common.status_addr);
+			if (acpi_ec_status & ACPI_EC_FLAG_OBF)
+				return 0;
+			udelay(ACPI_EC_UDELAY);
+		} while (--i>0);
+		break;
+	case ACPI_EC_EVENT_IBE:
+		do {
+			acpi_hw_low_level_read(8, &acpi_ec_status, &ec->common.status_addr);
+			if (!(acpi_ec_status & ACPI_EC_FLAG_IBF))
+				return 0;
+			udelay(ACPI_EC_UDELAY);
+		} while (--i>0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return -ETIME;
+}
+static int acpi_ec_burst_wait(union acpi_ec *ec, unsigned int event)
 {
 	int	result = 0;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_wait");
 
-	ec->expect_event = event;
+	ec->burst.expect_event = event;
 	smp_mb();
 
-	result = wait_event_interruptible_timeout(ec->wait,
-					!ec->expect_event,
+	result = wait_event_interruptible_timeout(ec->burst.wait,
+					!ec->burst.expect_event,
 					msecs_to_jiffies(ACPI_EC_DELAY));
 	
-	ec->expect_event = 0;
+	ec->burst.expect_event = 0;
 	smp_mb();
 
 	if (result < 0){
@@ -160,7 +270,7 @@ static int acpi_ec_wait(struct acpi_ec *ec, unsigned int event)
 
 static int
 acpi_ec_enter_burst_mode (
-	struct acpi_ec		*ec)
+	union acpi_ec		*ec)
 {
 	u32			tmp = 0;
 	int			status = 0;
@@ -170,43 +280,43 @@ acpi_ec_enter_burst_mode (
 	status = acpi_ec_read_status(ec);
 	if (status != -EINVAL &&
 		!(status & ACPI_EC_FLAG_BURST)){
-		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->command_addr);
+		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->common.command_addr);
 		status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 		if (status){
-			acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+			acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 			return_VALUE(-EINVAL);
 		}
-		acpi_hw_low_level_read(8, &tmp, &ec->data_addr);
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_hw_low_level_read(8, &tmp, &ec->common.data_addr);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		if(tmp != 0x90 ) {/* Burst ACK byte*/
 			return_VALUE(-EINVAL);
 		}
 	}
 
-	atomic_set(&ec->leaving_burst , 0);
+	atomic_set(&ec->burst.leaving_burst , 0);
 	return_VALUE(0);
 }
 
 static int
 acpi_ec_leave_burst_mode (
-	struct acpi_ec		*ec)
+	union acpi_ec		*ec)
 {
 	int			status =0;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_leave_burst_mode");
 
-	atomic_set(&ec->leaving_burst , 1);
+	atomic_set(&ec->burst.leaving_burst , 1);
 	status = acpi_ec_read_status(ec);
 	if (status != -EINVAL &&
 		(status & ACPI_EC_FLAG_BURST)){
-		acpi_hw_low_level_write(8, ACPI_EC_BURST_DISABLE, &ec->command_addr);
+		acpi_hw_low_level_write(8, ACPI_EC_BURST_DISABLE, &ec->common.command_addr);
 		status = acpi_ec_wait(ec, ACPI_EC_FLAG_IBF);
 		if (status){
-			acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+			acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,"------->wait fail\n"));
 			return_VALUE(-EINVAL);
 		}
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		status = acpi_ec_read_status(ec);
 	}
 
@@ -215,7 +325,131 @@ acpi_ec_leave_burst_mode (
 
 static int
 acpi_ec_read (
-	struct acpi_ec		*ec,
+	union acpi_ec		*ec,
+	u8			address,
+	u32			*data)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_read(ec, address, data);
+	else
+		return acpi_ec_burst_read(ec, address, data);
+}
+static int
+acpi_ec_write (
+	union acpi_ec		*ec,
+	u8			address,
+	u8			data)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_write(ec, address, data);
+	else
+		return acpi_ec_burst_write(ec, address, data);
+}
+static int
+acpi_ec_polling_read (
+	union acpi_ec		*ec,
+	u8			address,
+	u32			*data)
+{
+	acpi_status		status = AE_OK;
+	int			result = 0;
+	unsigned long		flags = 0;
+	u32			glk = 0;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_read");
+
+	if (!ec || !data)
+		return_VALUE(-EINVAL);
+
+	*data = 0;
+
+	if (ec->common.global_lock) {
+		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
+		if (ACPI_FAILURE(status))
+			return_VALUE(-ENODEV);
+	}
+
+	spin_lock_irqsave(&ec->polling.lock, flags);
+
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ, &ec->common.command_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Read [%02x] from address [%02x]\n",
+		*data, address));
+	
+end:
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	if (ec->common.global_lock)
+		acpi_release_global_lock(glk);
+
+	return_VALUE(result);
+}
+
+
+static int
+acpi_ec_polling_write (
+	union acpi_ec		*ec,
+	u8			address,
+	u8			data)
+{
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	unsigned long		flags = 0;
+	u32			glk = 0;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_write");
+
+	if (!ec)
+		return_VALUE(-EINVAL);
+
+	if (ec->common.global_lock) {
+		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
+		if (ACPI_FAILURE(status))
+			return_VALUE(-ENODEV);
+	}
+
+	spin_lock_irqsave(&ec->polling.lock, flags);
+
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE, &ec->common.command_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_write(8, data, &ec->common.data_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Wrote [%02x] to address [%02x]\n",
+		data, address));
+
+end:
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	if (ec->common.global_lock)
+		acpi_release_global_lock(glk);
+
+	return_VALUE(result);
+}
+
+static int
+acpi_ec_burst_read (
+	union acpi_ec		*ec,
 	u8			address,
 	u32			*data)
 {
@@ -230,51 +464,51 @@ acpi_ec_read (
 retry:
 	*data = 0;
 
-	if (ec->global_lock) {
+	if (ec->common.global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status))
 			return_VALUE(-ENODEV);
 	}
 
 	WARN_ON(in_interrupt());
-	down(&ec->sem);
+	down(&ec->burst.sem);
 
 	if(acpi_ec_enter_burst_mode(ec))
 		goto end;
 
-	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ, &ec->command_addr);
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ, &ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (status) {
 		goto end;
 	}
 
-	acpi_hw_low_level_write(8, address, &ec->data_addr);
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
 	status= acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 	if (status){
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto end;
 	}
 
-	acpi_hw_low_level_read(8, data, &ec->data_addr);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Read [%02x] from address [%02x]\n",
 		*data, address));
 	
 end:
 	acpi_ec_leave_burst_mode(ec);
-	up(&ec->sem);
+	up(&ec->burst.sem);
 
-	if (ec->global_lock)
+	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
 
-	if(atomic_read(&ec->leaving_burst) == 2){
+	if(atomic_read(&ec->burst.leaving_burst) == 2){
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,"aborted, retry ...\n"));
-		while(atomic_read(&ec->pending_gpe)){
+		while(atomic_read(&ec->burst.pending_gpe)){
 			msleep(1);	
 		}
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto retry;
 	}
 
@@ -283,8 +517,8 @@ end:
 
 
 static int
-acpi_ec_write (
-	struct acpi_ec		*ec,
+acpi_ec_burst_write (
+	union acpi_ec		*ec,
 	u8			address,
 	u8			data)
 {
@@ -297,14 +531,14 @@ acpi_ec_write (
 	if (!ec)
 		return_VALUE(-EINVAL);
 retry:
-	if (ec->global_lock) {
+	if (ec->common.global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status))
 			return_VALUE(-ENODEV);
 	}
 
 	WARN_ON(in_interrupt());
-	down(&ec->sem);
+	down(&ec->burst.sem);
 
 	if(acpi_ec_enter_burst_mode(ec))
 		goto end;
@@ -312,33 +546,33 @@ retry:
 	status = acpi_ec_read_status(ec);
 	if (status != -EINVAL &&
 		!(status & ACPI_EC_FLAG_BURST)){
-		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->command_addr);
+		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->common.command_addr);
 		status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 		if (status)
 			goto end;
-		acpi_hw_low_level_read(8, &tmp, &ec->data_addr);
+		acpi_hw_low_level_read(8, &tmp, &ec->common.data_addr);
 		if(tmp != 0x90 ) /* Burst ACK byte*/
 			goto end;
 	}
 	/*Now we are in burst mode*/
 
-	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE, &ec->command_addr);
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE, &ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (status){
 		goto end;
 	}
 
-	acpi_hw_low_level_write(8, address, &ec->data_addr);
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
 	if (status){
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto end;
 	}
 
-	acpi_hw_low_level_write(8, data, &ec->data_addr);
+	acpi_hw_low_level_write(8, data, &ec->common.data_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (status)
 		goto end;
 
@@ -347,17 +581,17 @@ retry:
 
 end:
 	acpi_ec_leave_burst_mode(ec);
-	up(&ec->sem);
+	up(&ec->burst.sem);
 
-	if (ec->global_lock)
+	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
 
-	if(atomic_read(&ec->leaving_burst) == 2){
+	if(atomic_read(&ec->burst.leaving_burst) == 2){
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,"aborted, retry ...\n"));
-		while(atomic_read(&ec->pending_gpe)){
+		while(atomic_read(&ec->burst.pending_gpe)){
 			msleep(1);	
 		}
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto retry;
 	}
 
@@ -370,7 +604,7 @@ end:
 int
 ec_read(u8 addr, u8 *val)
 {
-	struct acpi_ec *ec;
+	union acpi_ec *ec;
 	int err;
 	u32 temp_data;
 
@@ -393,7 +627,7 @@ EXPORT_SYMBOL(ec_read);
 int
 ec_write(u8 addr, u8 val)
 {
-	struct acpi_ec *ec;
+	union acpi_ec *ec;
 	int err;
 
 	if (!first_ec)
@@ -407,10 +641,66 @@ ec_write(u8 addr, u8 val)
 }
 EXPORT_SYMBOL(ec_write);
 
-
 static int
 acpi_ec_query (
-	struct acpi_ec		*ec,
+	union acpi_ec		*ec,
+	u32			*data)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_query(ec, data);
+	else
+		return acpi_ec_burst_query(ec, data);
+}
+static int
+acpi_ec_polling_query (
+	union acpi_ec		*ec,
+	u32			*data)
+{
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	unsigned long		flags = 0;
+	u32			glk = 0;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_query");
+
+	if (!ec || !data)
+		return_VALUE(-EINVAL);
+
+	*data = 0;
+
+	if (ec->common.global_lock) {
+		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
+		if (ACPI_FAILURE(status))
+			return_VALUE(-ENODEV);
+	}
+
+	/*
+	 * Query the EC to find out which _Qxx method we need to evaluate.
+	 * Note that successful completion of the query causes the ACPI_EC_SCI
+	 * bit to be cleared (and thus clearing the interrupt source).
+	 */
+	spin_lock_irqsave(&ec->polling.lock, flags);
+
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_QUERY, &ec->common.command_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+	if (!*data)
+		result = -ENODATA;
+
+end:
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	if (ec->common.global_lock)
+		acpi_release_global_lock(glk);
+
+	return_VALUE(result);
+}
+static int
+acpi_ec_burst_query (
+	union acpi_ec		*ec,
 	u32			*data)
 {
 	int			status = 0;
@@ -422,13 +712,13 @@ acpi_ec_query (
 		return_VALUE(-EINVAL);
 	*data = 0;
 
-	if (ec->global_lock) {
+	if (ec->common.global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status))
 			return_VALUE(-ENODEV);
 	}
 
-	down(&ec->sem);
+	down(&ec->burst.sem);
 	if(acpi_ec_enter_burst_mode(ec))
 		goto end;
 	/*
@@ -436,28 +726,28 @@ acpi_ec_query (
 	 * Note that successful completion of the query causes the ACPI_EC_SCI
 	 * bit to be cleared (and thus clearing the interrupt source).
 	 */
-	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_QUERY, &ec->command_addr);
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_QUERY, &ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 	if (status){
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto end;
 	}
 
-	acpi_hw_low_level_read(8, data, &ec->data_addr);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (!*data)
 		status = -ENODATA;
 
 end:
 	acpi_ec_leave_burst_mode(ec);
-	up(&ec->sem);
+	up(&ec->burst.sem);
 
-	if (ec->global_lock)
+	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
 
-	if(atomic_read(&ec->leaving_burst) == 2){
+	if(atomic_read(&ec->burst.leaving_burst) == 2){
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,"aborted, retry ...\n"));
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		status = -ENODATA;
 	}
 	return_VALUE(status);
@@ -468,7 +758,7 @@ end:
                                 Event Management
    -------------------------------------------------------------------------- */
 
-struct acpi_ec_query_data {
+union acpi_ec_query_data {
 	acpi_handle		handle;
 	u8			data;
 };
@@ -477,7 +767,59 @@ static void
 acpi_ec_gpe_query (
 	void			*ec_cxt)
 {
-	struct acpi_ec		*ec = (struct acpi_ec *) ec_cxt;
+	if (acpi_ec_polling_mode) 
+		acpi_ec_gpe_polling_query(ec_cxt);
+	else
+		acpi_ec_gpe_burst_query(ec_cxt);
+}
+
+static void
+acpi_ec_gpe_polling_query (
+	void			*ec_cxt)
+{
+	union acpi_ec		*ec = (union acpi_ec *) ec_cxt;
+	u32			value = 0;
+	unsigned long		flags = 0;
+	static char		object_name[5] = {'_','Q','0','0','\0'};
+	const char		hex[] = {'0','1','2','3','4','5','6','7',
+				         '8','9','A','B','C','D','E','F'};
+
+	ACPI_FUNCTION_TRACE("acpi_ec_gpe_query");
+
+	if (!ec_cxt)
+		goto end;
+
+	spin_lock_irqsave(&ec->polling.lock, flags);
+	acpi_hw_low_level_read(8, &value, &ec->common.command_addr);
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	/* TBD: Implement asynch events!
+	 * NOTE: All we care about are EC-SCI's.  Other EC events are
+	 * handled via polling (yuck!).  This is because some systems
+	 * treat EC-SCIs as level (versus EDGE!) triggered, preventing
+	 *  a purely interrupt-driven approach (grumble, grumble).
+	 */
+	if (!(value & ACPI_EC_FLAG_SCI))
+		goto end;
+
+	if (acpi_ec_query(ec, &value))
+		goto end;
+
+	object_name[2] = hex[((value >> 4) & 0x0F)];
+	object_name[3] = hex[(value & 0x0F)];
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluating %s\n", object_name));
+
+	acpi_evaluate_object(ec->common.handle, object_name, NULL, NULL);
+
+end:	
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
+}
+static void
+acpi_ec_gpe_burst_query (
+	void			*ec_cxt)
+{
+	union acpi_ec		*ec = (union acpi_ec *) ec_cxt;
 	u32			value;
 	int			result = -ENODATA;
 	static char		object_name[5] = {'_','Q','0','0','\0'};
@@ -497,9 +839,9 @@ acpi_ec_gpe_query (
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluating %s\n", object_name));
 
-	acpi_evaluate_object(ec->handle, object_name, NULL, NULL);
+	acpi_evaluate_object(ec->common.handle, object_name, NULL, NULL);
 end:	
-	atomic_dec(&ec->pending_gpe);
+	atomic_dec(&ec->burst.pending_gpe);
 	return;
 }
 
@@ -507,48 +849,77 @@ static u32
 acpi_ec_gpe_handler (
 	void			*data)
 {
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_gpe_polling_handler(data);
+	else
+		return acpi_ec_gpe_burst_handler(data);	
+}
+static u32
+acpi_ec_gpe_polling_handler (
+	void			*data)
+{
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = (union acpi_ec *) data;
+
+	if (!ec)
+		return ACPI_INTERRUPT_NOT_HANDLED;
+
+	acpi_disable_gpe(NULL, ec->common.gpe_bit, ACPI_ISR);
+
+	status = acpi_os_queue_for_execution(OSD_PRIORITY_GPE,
+		acpi_ec_gpe_query, ec);
+
+	if (status == AE_OK)
+		return ACPI_INTERRUPT_HANDLED;
+	else
+		return ACPI_INTERRUPT_NOT_HANDLED;
+}
+static u32
+acpi_ec_gpe_burst_handler (
+	void			*data)
+{
 	acpi_status		status = AE_OK;
 	u32			value;
-	struct acpi_ec		*ec = (struct acpi_ec *) data;
+	union acpi_ec		*ec = (union acpi_ec *) data;
 
 	if (!ec)
 		return ACPI_INTERRUPT_NOT_HANDLED;
 
-	acpi_disable_gpe(NULL, ec->gpe_bit, ACPI_ISR);
+	acpi_disable_gpe(NULL, ec->common.gpe_bit, ACPI_ISR);
 
 	value = acpi_ec_read_status(ec);
 
 	if((value & ACPI_EC_FLAG_IBF) &&
 		!(value & ACPI_EC_FLAG_BURST) &&
-			(atomic_read(&ec->leaving_burst) == 0)) { 
+			(atomic_read(&ec->burst.leaving_burst) == 0)) { 
 	/*
 	 * the embedded controller disables 
 	 * burst mode for any reason other 
 	 * than the burst disable command
 	 * to process critical event.
 	 */
-		atomic_set(&ec->leaving_burst , 2); /* block current pending transaction
+		atomic_set(&ec->burst.leaving_burst , 2); /* block current pending transaction
 					and retry */
-		wake_up(&ec->wait);
+		wake_up(&ec->burst.wait);
 	}else {
-		if ((ec->expect_event == ACPI_EC_EVENT_OBF &&
+		if ((ec->burst.expect_event == ACPI_EC_EVENT_OBF &&
 				(value & ACPI_EC_FLAG_OBF)) ||
-	    			(ec->expect_event == ACPI_EC_EVENT_IBE &&
+	    			(ec->burst.expect_event == ACPI_EC_EVENT_IBE &&
 				!(value & ACPI_EC_FLAG_IBF))) {
-			ec->expect_event = 0;
-			wake_up(&ec->wait);
+			ec->burst.expect_event = 0;
+			wake_up(&ec->burst.wait);
 			return ACPI_INTERRUPT_HANDLED;
 		}
 	}
 
 	if (value & ACPI_EC_FLAG_SCI){
-		atomic_add(1, &ec->pending_gpe) ;
+		atomic_add(1, &ec->burst.pending_gpe) ;
 		status = acpi_os_queue_for_execution(OSD_PRIORITY_GPE,
 						acpi_ec_gpe_query, ec);
 		return status == AE_OK ?
 		ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
 	} 
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_ISR);
 	return status == AE_OK ?
 		ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
 }
@@ -585,7 +956,7 @@ acpi_ec_space_handler (
 	void			*region_context)
 {
 	int			result = 0;
-	struct acpi_ec		*ec = NULL;
+	union acpi_ec		*ec = NULL;
 	u64			temp = *value;
 	acpi_integer		f_v = 0;
 	int 			i = 0;
@@ -600,7 +971,7 @@ acpi_ec_space_handler (
 		return_VALUE(AE_BAD_PARAMETER);
 	}
 
-	ec = (struct acpi_ec *) handler_context;
+	ec = (union acpi_ec *) handler_context;
 
 next_byte:
 	switch (function) {
@@ -661,7 +1032,7 @@ static struct proc_dir_entry	*acpi_ec_dir;
 static int
 acpi_ec_read_info (struct seq_file *seq, void *offset)
 {
-	struct acpi_ec		*ec = (struct acpi_ec *) seq->private;
+	union acpi_ec		*ec = (union acpi_ec *) seq->private;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_read_info");
 
@@ -669,12 +1040,12 @@ acpi_ec_read_info (struct seq_file *seq, void *offset)
 		goto end;
 
 	seq_printf(seq, "gpe bit:                 0x%02x\n",
-		(u32) ec->gpe_bit);
+		(u32) ec->common.gpe_bit);
 	seq_printf(seq, "ports:                   0x%02x, 0x%02x\n",
-		(u32) ec->status_addr.address, (u32) ec->data_addr.address);
+		(u32) ec->common.status_addr.address, (u32) ec->common.data_addr.address);
 	seq_printf(seq, "use global lock:         %s\n",
-		ec->global_lock?"yes":"no");
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		ec->common.global_lock?"yes":"no");
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 
 end:
 	return_VALUE(0);
@@ -697,7 +1068,7 @@ static int
 acpi_ec_add_fs (
 	struct acpi_device	*device)
 {
-	struct proc_dir_entry	*entry;
+	struct proc_dir_entry	*entry = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_add_fs");
 
@@ -744,13 +1115,14 @@ acpi_ec_remove_fs (
                                Driver Interface
    -------------------------------------------------------------------------- */
 
+
 static int
-acpi_ec_add (
+acpi_ec_polling_add (
 	struct acpi_device	*device)
 {
-	int			result;
-	acpi_status		status;
-	struct acpi_ec		*ec;
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
 	unsigned long		uid;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_add");
@@ -758,39 +1130,107 @@ acpi_ec_add (
 	if (!device)
 		return_VALUE(-EINVAL);
 
-	ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+	ec = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
 	if (!ec)
 		return_VALUE(-ENOMEM);
-	memset(ec, 0, sizeof(struct acpi_ec));
-
-	ec->handle = device->handle;
-	ec->uid = -1;
- 	atomic_set(&ec->pending_gpe, 0);
- 	atomic_set(&ec->leaving_burst , 1);
- 	init_MUTEX(&ec->sem);
- 	init_waitqueue_head(&ec->wait);
+	memset(ec, 0, sizeof(union acpi_ec));
+
+	ec->common.handle = device->handle;
+	ec->common.uid = -1;
+	spin_lock_init(&ec->polling.lock);
 	strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_EC_CLASS);
 	acpi_driver_data(device) = ec;
 
 	/* Use the global lock for all EC transactions? */
-	acpi_evaluate_integer(ec->handle, "_GLK", NULL, &ec->global_lock);
+	acpi_evaluate_integer(ec->common.handle, "_GLK", NULL, &ec->common.global_lock);
 
 	/* If our UID matches the UID for the ECDT-enumerated EC,
 	   we now have the *real* EC info, so kill the makeshift one.*/
-	acpi_evaluate_integer(ec->handle, "_UID", NULL, &uid);
-	if (ec_ecdt && ec_ecdt->uid == uid) {
+	acpi_evaluate_integer(ec->common.handle, "_UID", NULL, &uid);
+	if (ec_ecdt && ec_ecdt->common.uid == uid) {
 		acpi_remove_address_space_handler(ACPI_ROOT_OBJECT,
 			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler);
+	
+		acpi_remove_gpe_handler(NULL, ec_ecdt->common.gpe_bit, &acpi_ec_gpe_handler);
+
+		kfree(ec_ecdt);
+	}
+
+	/* Get GPE bit assignment (EC events). */
+	/* TODO: Add support for _GPE returning a package */
+	status = acpi_evaluate_integer(ec->common.handle, "_GPE", NULL, &ec->common.gpe_bit);
+	if (ACPI_FAILURE(status)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+			"Error obtaining GPE bit assignment\n"));
+		result = -ENODEV;
+		goto end;
+	}
 
-		acpi_remove_gpe_handler(NULL, ec_ecdt->gpe_bit, &acpi_ec_gpe_handler);
+	result = acpi_ec_add_fs(device);
+	if (result)
+		goto end;
+
+	printk(KERN_INFO PREFIX "%s [%s] (gpe %d)\n",
+		acpi_device_name(device), acpi_device_bid(device),
+		(u32) ec->common.gpe_bit);
+
+	if (!first_ec)
+		first_ec = device;
+
+end:
+	if (result)
+		kfree(ec);
+
+	return_VALUE(result);
+}
+static int
+acpi_ec_burst_add (
+	struct acpi_device	*device)
+{
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
+	unsigned long		uid;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_add");
+
+	if (!device)
+		return_VALUE(-EINVAL);
+
+	ec = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
+	if (!ec)
+		return_VALUE(-ENOMEM);
+	memset(ec, 0, sizeof(union acpi_ec));
+
+	ec->common.handle = device->handle;
+	ec->common.uid = -1;
+ 	atomic_set(&ec->burst.pending_gpe, 0);
+ 	atomic_set(&ec->burst.leaving_burst , 1);
+ 	init_MUTEX(&ec->burst.sem);
+ 	init_waitqueue_head(&ec->burst.wait);
+	strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_EC_CLASS);
+	acpi_driver_data(device) = ec;
+
+	/* Use the global lock for all EC transactions? */
+	acpi_evaluate_integer(ec->common.handle, "_GLK", NULL, &ec->common.global_lock);
+
+	/* If our UID matches the UID for the ECDT-enumerated EC,
+	   we now have the *real* EC info, so kill the makeshift one.*/
+	acpi_evaluate_integer(ec->common.handle, "_UID", NULL, &uid);
+	if (ec_ecdt && ec_ecdt->common.uid == uid) {
+		acpi_remove_address_space_handler(ACPI_ROOT_OBJECT,
+			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler);
+
+		acpi_remove_gpe_handler(NULL, ec_ecdt->common.gpe_bit, &acpi_ec_gpe_handler);
 
 		kfree(ec_ecdt);
 	}
 
 	/* Get GPE bit assignment (EC events). */
 	/* TODO: Add support for _GPE returning a package */
-	status = acpi_evaluate_integer(ec->handle, "_GPE", NULL, &ec->gpe_bit);
+	status = acpi_evaluate_integer(ec->common.handle, "_GPE", NULL, &ec->common.gpe_bit);
 	if (ACPI_FAILURE(status)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 			"Error obtaining GPE bit assignment\n"));
@@ -804,7 +1244,7 @@ acpi_ec_add (
 
 	printk(KERN_INFO PREFIX "%s [%s] (gpe %d)\n",
 		acpi_device_name(device), acpi_device_bid(device),
-		(u32) ec->gpe_bit);
+		(u32) ec->common.gpe_bit);
 
 	if (!first_ec)
 		first_ec = device;
@@ -822,7 +1262,7 @@ acpi_ec_remove (
 	struct acpi_device	*device,
 	int			type)
 {
-	struct acpi_ec		*ec;
+	union acpi_ec		*ec = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_remove");
 
@@ -844,7 +1284,7 @@ acpi_ec_io_ports (
 	struct acpi_resource	*resource,
 	void			*context)
 {
-	struct acpi_ec		*ec = (struct acpi_ec *) context;
+	union acpi_ec		*ec = (union acpi_ec *) context;
 	struct acpi_generic_address *addr;
 
 	if (resource->id != ACPI_RSTYPE_IO) {
@@ -856,10 +1296,10 @@ acpi_ec_io_ports (
 	 * the second address region returned is the status/command
 	 * port.
 	 */
-	if (ec->data_addr.register_bit_width == 0) {
-		addr = &ec->data_addr;
-	} else if (ec->command_addr.register_bit_width == 0) {
-		addr = &ec->command_addr;
+	if (ec->common.data_addr.register_bit_width == 0) {
+		addr = &ec->common.data_addr;
+	} else if (ec->common.command_addr.register_bit_width == 0) {
+		addr = &ec->common.command_addr;
 	} else {
 		return AE_CTRL_TERMINATE;
 	}
@@ -877,8 +1317,8 @@ static int
 acpi_ec_start (
 	struct acpi_device	*device)
 {
-	acpi_status		status;
-	struct acpi_ec		*ec;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_start");
 
@@ -893,35 +1333,36 @@ acpi_ec_start (
 	/*
 	 * Get I/O port addresses. Convert to GAS format.
 	 */
-	status = acpi_walk_resources(ec->handle, METHOD_NAME__CRS,
+	status = acpi_walk_resources(ec->common.handle, METHOD_NAME__CRS,
 		acpi_ec_io_ports, ec);
-	if (ACPI_FAILURE(status) || ec->command_addr.register_bit_width == 0) {
+	if (ACPI_FAILURE(status) || ec->common.command_addr.register_bit_width == 0) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error getting I/O port addresses"));
 		return_VALUE(-ENODEV);
 	}
 
-	ec->status_addr = ec->command_addr;
+	ec->common.status_addr = ec->common.command_addr;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02x, ports=0x%2x,0x%2x\n",
-		(u32) ec->gpe_bit, (u32) ec->command_addr.address,
-		(u32) ec->data_addr.address));
+		(u32) ec->common.gpe_bit, (u32) ec->common.command_addr.address,
+		(u32) ec->common.data_addr.address));
+
 
 	/*
 	 * Install GPE handler
 	 */
-	status = acpi_install_gpe_handler(NULL, ec->gpe_bit,
+	status = acpi_install_gpe_handler(NULL, ec->common.gpe_bit,
 		ACPI_GPE_EDGE_TRIGGERED, &acpi_ec_gpe_handler, ec);
 	if (ACPI_FAILURE(status)) {
 		return_VALUE(-ENODEV);
 	}
-	acpi_set_gpe_type (NULL, ec->gpe_bit, ACPI_GPE_TYPE_RUNTIME);
-	acpi_enable_gpe (NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_set_gpe_type (NULL, ec->common.gpe_bit, ACPI_GPE_TYPE_RUNTIME);
+	acpi_enable_gpe (NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 
-	status = acpi_install_address_space_handler (ec->handle,
+	status = acpi_install_address_space_handler (ec->common.handle,
 			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler,
 			&acpi_ec_space_setup, ec);
 	if (ACPI_FAILURE(status)) {
-		acpi_remove_gpe_handler(NULL, ec->gpe_bit, &acpi_ec_gpe_handler);
+		acpi_remove_gpe_handler(NULL, ec->common.gpe_bit, &acpi_ec_gpe_handler);
 		return_VALUE(-ENODEV);
 	}
 
@@ -934,8 +1375,8 @@ acpi_ec_stop (
 	struct acpi_device	*device,
 	int			type)
 {
-	acpi_status		status;
-	struct acpi_ec		*ec;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_stop");
 
@@ -944,12 +1385,12 @@ acpi_ec_stop (
 
 	ec = acpi_driver_data(device);
 
-	status = acpi_remove_address_space_handler(ec->handle,
+	status = acpi_remove_address_space_handler(ec->common.handle,
 		ACPI_ADR_SPACE_EC, &acpi_ec_space_handler);
 	if (ACPI_FAILURE(status))
 		return_VALUE(-ENODEV);
 
-	status = acpi_remove_gpe_handler(NULL, ec->gpe_bit, &acpi_ec_gpe_handler);
+	status = acpi_remove_gpe_handler(NULL, ec->common.gpe_bit, &acpi_ec_gpe_handler);
 	if (ACPI_FAILURE(status))
 		return_VALUE(-ENODEV);
 
@@ -963,26 +1404,76 @@ acpi_fake_ecdt_callback (
 	void		*context,
 	void		**retval)
 {
+
+	if (acpi_ec_polling_mode)
+		return acpi_fake_ecdt_polling_callback(handle,
+			Level, context, retval);
+	else
+		return acpi_fake_ecdt_burst_callback(handle,
+			Level, context, retval);
+}
+
+static acpi_status __init
+acpi_fake_ecdt_polling_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval)
+{
 	acpi_status	status;
 
 	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
 		acpi_ec_io_ports, ec_ecdt);
 	if (ACPI_FAILURE(status))
 		return status;
-	ec_ecdt->status_addr = ec_ecdt->command_addr;
+	ec_ecdt->common.status_addr = ec_ecdt->common.command_addr;
 
-	ec_ecdt->uid = -1;
-	acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->uid);
+	ec_ecdt->common.uid = -1;
+	acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->common.uid);
 
-	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->gpe_bit);
+	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->common.gpe_bit);
 	if (ACPI_FAILURE(status))
 		return status;
-	ec_ecdt->global_lock = TRUE;
-	ec_ecdt->handle = handle;
+	spin_lock_init(&ec_ecdt->polling.lock);
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.handle = handle;
 
 	printk(KERN_INFO PREFIX  "GPE=0x%02x, ports=0x%2x, 0x%2x\n",
-		(u32) ec_ecdt->gpe_bit, (u32) ec_ecdt->command_addr.address,
-		(u32) ec_ecdt->data_addr.address);
+		(u32) ec_ecdt->common.gpe_bit, (u32) ec_ecdt->common.command_addr.address,
+		(u32) ec_ecdt->common.data_addr.address);
+
+	return AE_CTRL_TERMINATE;
+}
+
+static acpi_status __init
+acpi_fake_ecdt_burst_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval)
+{
+	acpi_status	status;
+
+	init_MUTEX(&ec_ecdt->burst.sem);
+	init_waitqueue_head(&ec_ecdt->burst.wait);
+	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
+		acpi_ec_io_ports, ec_ecdt);
+	if (ACPI_FAILURE(status))
+		return status;
+	ec_ecdt->common.status_addr = ec_ecdt->common.command_addr;
+
+	ec_ecdt->common.uid = -1;
+	acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->common.uid);
+
+	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->common.gpe_bit);
+	if (ACPI_FAILURE(status))
+		return status;
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.handle = handle;
+
+	printk(KERN_INFO PREFIX  "GPE=0x%02x, ports=0x%2x, 0x%2x\n",
+		(u32) ec_ecdt->common.gpe_bit, (u32) ec_ecdt->common.command_addr.address,
+		(u32) ec_ecdt->common.data_addr.address);
 
 	return AE_CTRL_TERMINATE;
 }
@@ -1005,12 +1496,12 @@ acpi_ec_fake_ecdt(void)
 
 	printk(KERN_INFO PREFIX "Try to make an fake ECDT\n");
 
-	ec_ecdt = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+	ec_ecdt = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
 	if (!ec_ecdt) {
 		ret = -ENOMEM;
 		goto error;
 	}
-	memset(ec_ecdt, 0, sizeof(struct acpi_ec));
+	memset(ec_ecdt, 0, sizeof(union acpi_ec));
 
 	status = acpi_get_devices (ACPI_EC_HID,
 				acpi_fake_ecdt_callback,
@@ -1031,6 +1522,60 @@ error:
 static int __init
 acpi_ec_get_real_ecdt(void)
 {
+	if (acpi_ec_polling_mode)
+		return acpi_ec_polling_get_real_ecdt();
+	else
+		return acpi_ec_burst_get_real_ecdt();
+}
+
+static int __init
+acpi_ec_polling_get_real_ecdt(void)
+{
+	acpi_status		status;
+	struct acpi_table_ecdt 	*ecdt_ptr;
+
+	status = acpi_get_firmware_table("ECDT", 1, ACPI_LOGICAL_ADDRESSING, 
+		(struct acpi_table_header **) &ecdt_ptr);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	printk(KERN_INFO PREFIX "Found ECDT\n");
+
+	/*
+	 * Generate a temporary ec context to use until the namespace is scanned
+	 */
+	ec_ecdt = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
+	if (!ec_ecdt)
+		return -ENOMEM;
+	memset(ec_ecdt, 0, sizeof(union acpi_ec));
+
+	ec_ecdt->common.command_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.status_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.data_addr = ecdt_ptr->ec_data;
+	ec_ecdt->common.gpe_bit = ecdt_ptr->gpe_bit;
+	spin_lock_init(&ec_ecdt->polling.lock);
+	/* use the GL just to be safe */
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.uid = ecdt_ptr->uid;
+
+	status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->common.handle);
+	if (ACPI_FAILURE(status)) {
+		goto error;
+	}
+
+	return 0;
+error:
+	printk(KERN_ERR PREFIX "Could not use ECDT\n");
+	kfree(ec_ecdt);
+	ec_ecdt = NULL;
+
+	return -ENODEV;
+}
+
+
+static int __init
+acpi_ec_burst_get_real_ecdt(void)
+{
 	acpi_status		status;
 	struct acpi_table_ecdt 	*ecdt_ptr;
 
@@ -1044,22 +1589,22 @@ acpi_ec_get_real_ecdt(void)
 	/*
 	 * Generate a temporary ec context to use until the namespace is scanned
 	 */
-	ec_ecdt = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+	ec_ecdt = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
 	if (!ec_ecdt)
 		return -ENOMEM;
-	memset(ec_ecdt, 0, sizeof(struct acpi_ec));
-
- 	init_MUTEX(&ec_ecdt->sem);
- 	init_waitqueue_head(&ec_ecdt->wait);
-	ec_ecdt->command_addr = ecdt_ptr->ec_control;
-	ec_ecdt->status_addr = ecdt_ptr->ec_control;
-	ec_ecdt->data_addr = ecdt_ptr->ec_data;
-	ec_ecdt->gpe_bit = ecdt_ptr->gpe_bit;
+	memset(ec_ecdt, 0, sizeof(union acpi_ec));
+
+ 	init_MUTEX(&ec_ecdt->burst.sem);
+ 	init_waitqueue_head(&ec_ecdt->burst.wait);
+	ec_ecdt->common.command_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.status_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.data_addr = ecdt_ptr->ec_data;
+	ec_ecdt->common.gpe_bit = ecdt_ptr->gpe_bit;
 	/* use the GL just to be safe */
-	ec_ecdt->global_lock = TRUE;
-	ec_ecdt->uid = ecdt_ptr->uid;
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.uid = ecdt_ptr->uid;
 
-	status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->handle);
+	status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->common.handle);
 	if (ACPI_FAILURE(status)) {
 		goto error;
 	}
@@ -1092,20 +1637,20 @@ acpi_ec_ecdt_probe (void)
 	/*
 	 * Install GPE handler
 	 */
-	status = acpi_install_gpe_handler(NULL, ec_ecdt->gpe_bit,
+	status = acpi_install_gpe_handler(NULL, ec_ecdt->common.gpe_bit,
 		ACPI_GPE_EDGE_TRIGGERED, &acpi_ec_gpe_handler,
 		ec_ecdt);
 	if (ACPI_FAILURE(status)) {
 		goto error;
 	}
-	acpi_set_gpe_type (NULL, ec_ecdt->gpe_bit, ACPI_GPE_TYPE_RUNTIME);
-	acpi_enable_gpe (NULL, ec_ecdt->gpe_bit, ACPI_NOT_ISR);
+	acpi_set_gpe_type (NULL, ec_ecdt->common.gpe_bit, ACPI_GPE_TYPE_RUNTIME);
+	acpi_enable_gpe (NULL, ec_ecdt->common.gpe_bit, ACPI_NOT_ISR);
 
 	status = acpi_install_address_space_handler (ACPI_ROOT_OBJECT,
 			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler,
 			&acpi_ec_space_setup, ec_ecdt);
 	if (ACPI_FAILURE(status)) {
-		acpi_remove_gpe_handler(NULL, ec_ecdt->gpe_bit,
+		acpi_remove_gpe_handler(NULL, ec_ecdt->common.gpe_bit,
 			&acpi_ec_gpe_handler);
 		goto error;
 	}
@@ -1123,7 +1668,7 @@ error:
 
 static int __init acpi_ec_init (void)
 {
-	int			result;
+	int			result = 0;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_init");
 
@@ -1166,4 +1711,24 @@ static int __init acpi_fake_ecdt_setup(char *str)
 	acpi_fake_ecdt_enabled = 1;
 	return 0;
 }
+
 __setup("acpi_fake_ecdt", acpi_fake_ecdt_setup);
+static int __init acpi_ec_set_polling_mode(char *str)
+{
+	int burst;
+
+	if (!get_option(&str, &burst))
+		return 0;
+
+	if (burst) {
+		acpi_ec_polling_mode = EC_BURST;
+		acpi_ec_driver.ops.add = acpi_ec_burst_add;
+	} else {
+		acpi_ec_polling_mode = EC_POLLING;
+		acpi_ec_driver.ops.add = acpi_ec_polling_add;
+	}
+	printk(KERN_INFO PREFIX "EC %s mode.\n",
+		burst ? "burst": "polling");
+	return 0;
+}
+__setup("ec_burst=", acpi_ec_set_polling_mode);
diff --git a/drivers/acpi/hotkey.c b/drivers/acpi/hotkey.c
index babdf76..1f76a40 100644
--- a/drivers/acpi/hotkey.c
+++ b/drivers/acpi/hotkey.c
@@ -1,5 +1,5 @@
-/* 
- *  hotkey.c - ACPI Hotkey Driver ($Revision:$)
+/*
+ *  hotkey.c - ACPI Hotkey Driver ($Revision: 0.2 $)
  *
  *  Copyright (C) 2004 Luming Yu <luming.yu@intel.com>
  *
@@ -51,17 +51,18 @@
 #define ACPI_HOTKEY_POLLING 0x2
 #define ACPI_UNDEFINED_EVENT    0xf
 
-#define MAX_CONFIG_RECORD_LEN   80
-#define MAX_NAME_PATH_LEN   80
-#define MAX_CALL_PARM       80
+#define RESULT_STR_LEN	    80
 
-#define IS_EVENT(e)       0xff	/* ((e) & 0x40000000)  */
-#define IS_POLL(e)      0xff	/* (~((e) & 0x40000000))  */
+#define ACTION_METHOD	0
+#define POLL_METHOD	1
 
+#define IS_EVENT(e)       	((e) <= 10000 && (e) >0)
+#define IS_POLL(e)      	((e) > 10000)
+#define IS_OTHERS(e)		((e)<=0 || (e)>=20000)
 #define _COMPONENT              ACPI_HOTKEY_COMPONENT
 ACPI_MODULE_NAME("acpi_hotkey")
 
-    MODULE_AUTHOR("luming.yu@intel.com");
+MODULE_AUTHOR("luming.yu@intel.com");
 MODULE_DESCRIPTION(ACPI_HOTK_NAME);
 MODULE_LICENSE("GPL");
 
@@ -114,7 +115,7 @@ struct acpi_event_hotkey {
 	char *action_method;	/* action method */
 };
 
-/* 
+/*
  * There are two ways to poll status
  * 1. directy call read_xxx method, without any arguments passed in
  * 2. call write_xxx method, with arguments passed in, you need
@@ -131,7 +132,7 @@ struct acpi_polling_hotkey {
 	char *poll_method;	/* poll method */
 	acpi_handle action_handle;	/* acpi handle attached action method */
 	char *action_method;	/* action method */
-	void *poll_result;	/* polling_result */
+	union acpi_object *poll_result;	/* polling_result */
 	struct proc_dir_entry *proc;
 };
 
@@ -162,20 +163,25 @@ static struct acpi_driver hotkey_driver = {
 		},
 };
 
+static void free_hotkey_device(union acpi_hotkey *key);
+static void free_hotkey_buffer(union acpi_hotkey *key);
+static void free_poll_hotkey_buffer(union acpi_hotkey *key);
 static int hotkey_open_config(struct inode *inode, struct file *file);
+static int hotkey_poll_open_config(struct inode *inode, struct file *file);
 static ssize_t hotkey_write_config(struct file *file,
 				   const char __user * buffer,
 				   size_t count, loff_t * data);
-static ssize_t hotkey_write_poll_config(struct file *file,
-					const char __user * buffer,
-					size_t count, loff_t * data);
 static int hotkey_info_open_fs(struct inode *inode, struct file *file);
 static int hotkey_action_open_fs(struct inode *inode, struct file *file);
 static ssize_t hotkey_execute_aml_method(struct file *file,
 					 const char __user * buffer,
 					 size_t count, loff_t * data);
 static int hotkey_config_seq_show(struct seq_file *seq, void *offset);
+static int hotkey_poll_config_seq_show(struct seq_file *seq, void *offset);
 static int hotkey_polling_open_fs(struct inode *inode, struct file *file);
+static union acpi_hotkey *get_hotkey_by_event(struct
+			      acpi_hotkey_list
+			      *hotkey_list, int event);
 
 /* event based config */
 static struct file_operations hotkey_config_fops = {
@@ -188,9 +194,9 @@ static struct file_operations hotkey_config_fops = {
 
 /* polling based config */
 static struct file_operations hotkey_poll_config_fops = {
-	.open = hotkey_open_config,
+	.open = hotkey_poll_open_config,
 	.read = seq_read,
-	.write = hotkey_write_poll_config,
+	.write = hotkey_write_config,
 	.llseek = seq_lseek,
 	.release = single_release,
 };
@@ -227,7 +233,7 @@ static int hotkey_info_seq_show(struct seq_file *seq, void *offset)
 {
 	ACPI_FUNCTION_TRACE("hotkey_info_seq_show");
 
-	seq_printf(seq, "Hotkey generic driver ver: %s", HOTKEY_ACPI_VERSION);
+	seq_printf(seq, "Hotkey generic driver ver: %s\n", HOTKEY_ACPI_VERSION);
 
 	return_VALUE(0);
 }
@@ -239,27 +245,35 @@ static int hotkey_info_open_fs(struct inode *inode, struct file *file)
 
 static char *format_result(union acpi_object *object)
 {
-	char *buf = (char *)kmalloc(sizeof(union acpi_object), GFP_KERNEL);
-
-	memset(buf, 0, sizeof(union acpi_object));
+	char *buf = NULL;
+	
+	buf = (char *)kmalloc(RESULT_STR_LEN, GFP_KERNEL);
+	if (buf)
+		memset(buf, 0, RESULT_STR_LEN);
+	else
+		goto do_fail;
 
 	/* Now, just support integer type */
 	if (object->type == ACPI_TYPE_INTEGER)
-		sprintf(buf, "%d", (u32) object->integer.value);
-
-	return buf;
+		sprintf(buf, "%d\n", (u32) object->integer.value);
+do_fail:
+	return (buf);
 }
 
 static int hotkey_polling_seq_show(struct seq_file *seq, void *offset)
 {
 	struct acpi_polling_hotkey *poll_hotkey =
 	    (struct acpi_polling_hotkey *)seq->private;
+	char *buf;
 
 	ACPI_FUNCTION_TRACE("hotkey_polling_seq_show");
 
-	if (poll_hotkey->poll_result)
-		seq_printf(seq, "%s", format_result(poll_hotkey->poll_result));
-
+	if (poll_hotkey->poll_result){
+		buf = format_result(poll_hotkey->poll_result);
+		if(buf)
+			seq_printf(seq, "%s", buf);
+		kfree(buf);
+	}
 	return_VALUE(0);
 }
 
@@ -276,19 +290,19 @@ static int hotkey_action_open_fs(struct inode *inode, struct file *file)
 /* Mapping external hotkey number to standardized hotkey event num */
 static int hotkey_get_internal_event(int event, struct acpi_hotkey_list *list)
 {
-	struct list_head *entries, *next;
-	int val = 0;
+	struct list_head *entries;
+	int val = -1;
 
 	ACPI_FUNCTION_TRACE("hotkey_get_internal_event");
 
-	list_for_each_safe(entries, next, list->entries) {
+	list_for_each(entries, list->entries) {
 		union acpi_hotkey *key =
 		    container_of(entries, union acpi_hotkey, entries);
 		if (key->link.hotkey_type == ACPI_HOTKEY_EVENT
-		    && key->event_hotkey.external_hotkey_num == event)
+		    && key->event_hotkey.external_hotkey_num == event){
 			val = key->link.hotkey_standard_num;
-		else
-			val = -1;
+			break;
+		}
 	}
 
 	return_VALUE(val);
@@ -306,7 +320,7 @@ acpi_hotkey_notify_handler(acpi_handle handle, u32 event, void *data)
 		return_VOID;
 
 	internal_event = hotkey_get_internal_event(event, &global_hotkey_list);
-	acpi_bus_generate_event(device, event, 0);
+	acpi_bus_generate_event(device, internal_event, 0);
 
 	return_VOID;
 }
@@ -329,13 +343,17 @@ static int auto_hotkey_remove(struct acpi_device *device, int type)
 static int create_polling_proc(union acpi_hotkey *device)
 {
 	struct proc_dir_entry *proc;
+	char  proc_name[80];
 	mode_t mode;
 
 	ACPI_FUNCTION_TRACE("create_polling_proc");
 	mode = S_IFREG | S_IRUGO | S_IWUGO;
 
-	proc = create_proc_entry(device->poll_hotkey.action_method,
-				 mode, hotkey_proc_dir);
+	sprintf(proc_name, "%d", device->link.hotkey_standard_num);
+	/*
+	strcat(proc_name, device->poll_hotkey.poll_method);
+	*/
+	proc = create_proc_entry(proc_name, mode, hotkey_proc_dir);
 
 	if (!proc) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
@@ -353,23 +371,6 @@ static int create_polling_proc(union acpi_hotkey *device)
 	return_VALUE(0);
 }
 
-static int is_valid_acpi_path(const char *pathname)
-{
-	acpi_handle handle;
-	acpi_status status;
-	ACPI_FUNCTION_TRACE("is_valid_acpi_path");
-
-	status = acpi_get_handle(NULL, (char *)pathname, &handle);
-	return_VALUE(!ACPI_FAILURE(status));
-}
-
-static int is_valid_hotkey(union acpi_hotkey *device)
-{
-	ACPI_FUNCTION_TRACE("is_valid_hotkey");
-	/* Implement valid check */
-	return_VALUE(1);
-}
-
 static int hotkey_add(union acpi_hotkey *device)
 {
 	int status = 0;
@@ -378,15 +379,11 @@ static int hotkey_add(union acpi_hotkey *device)
 	ACPI_FUNCTION_TRACE("hotkey_add");
 
 	if (device->link.hotkey_type == ACPI_HOTKEY_EVENT) {
-		status =
-		    acpi_bus_get_device(device->event_hotkey.bus_handle, &dev);
-		if (status)
-			return_VALUE(status);
-
+		acpi_bus_get_device(device->event_hotkey.bus_handle, &dev);
 		status = acpi_install_notify_handler(dev->handle,
-						     ACPI_SYSTEM_NOTIFY,
+						     ACPI_DEVICE_NOTIFY,
 						     acpi_hotkey_notify_handler,
-						     device);
+						     dev);
 	} else			/* Add polling hotkey */
 		create_polling_proc(device);
 
@@ -409,84 +406,143 @@ static int hotkey_remove(union acpi_hotkey *device)
 		if (key->link.hotkey_standard_num ==
 		    device->link.hotkey_standard_num) {
 			list_del(&key->link.entries);
-			remove_proc_entry(key->poll_hotkey.action_method,
-					  hotkey_proc_dir);
+			free_hotkey_device(key);
 			global_hotkey_list.count--;
 			break;
 		}
 	}
+	kfree(device);
 	return_VALUE(0);
 }
 
-static void hotkey_update(union acpi_hotkey *key)
+static int  hotkey_update(union acpi_hotkey *key)
 {
-	struct list_head *entries, *next;
+	struct list_head *entries;
 
 	ACPI_FUNCTION_TRACE("hotkey_update");
 
-	list_for_each_safe(entries, next, global_hotkey_list.entries) {
-		union acpi_hotkey *key =
+	list_for_each(entries, global_hotkey_list.entries) {
+		union acpi_hotkey *tmp=
 		    container_of(entries, union acpi_hotkey, entries);
-		if (key->link.hotkey_standard_num ==
+		if (tmp->link.hotkey_standard_num ==
 		    key->link.hotkey_standard_num) {
-			key->event_hotkey.bus_handle =
-			    key->event_hotkey.bus_handle;
-			key->event_hotkey.external_hotkey_num =
-			    key->event_hotkey.external_hotkey_num;
-			key->event_hotkey.action_handle =
-			    key->event_hotkey.action_handle;
-			key->event_hotkey.action_method =
-			    key->event_hotkey.action_method;
+			if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) {
+				free_hotkey_buffer(tmp);
+				tmp->event_hotkey.bus_handle =
+			    		key->event_hotkey.bus_handle;
+				tmp->event_hotkey.external_hotkey_num =
+			    		key->event_hotkey.external_hotkey_num;
+				tmp->event_hotkey.action_handle =
+			    		key->event_hotkey.action_handle;
+				tmp->event_hotkey.action_method =
+			    		key->event_hotkey.action_method;
+				kfree(key);
+			} else {
+				/*
+				char  proc_name[80];
+
+				sprintf(proc_name, "%d", tmp->link.hotkey_standard_num);
+				strcat(proc_name, tmp->poll_hotkey.poll_method);
+				remove_proc_entry(proc_name,hotkey_proc_dir);
+				*/
+				free_poll_hotkey_buffer(tmp);
+				tmp->poll_hotkey.poll_handle =
+					key->poll_hotkey.poll_handle;
+				tmp->poll_hotkey.poll_method =
+					key->poll_hotkey.poll_method;
+				tmp->poll_hotkey.action_handle =
+					key->poll_hotkey.action_handle;
+				tmp->poll_hotkey.action_method =
+					key->poll_hotkey.action_method;
+				tmp->poll_hotkey.poll_result =
+					key->poll_hotkey.poll_result;
+				/*
+				create_polling_proc(tmp);
+				*/
+				kfree(key);
+			}
+			return_VALUE(0);
 			break;
 		}
 	}
 
-	return_VOID;
+	return_VALUE(-ENODEV);
 }
 
 static void free_hotkey_device(union acpi_hotkey *key)
 {
 	struct acpi_device *dev;
-	int status;
 
 	ACPI_FUNCTION_TRACE("free_hotkey_device");
 
 	if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) {
-		status =
-		    acpi_bus_get_device(key->event_hotkey.bus_handle, &dev);
+		acpi_bus_get_device(key->event_hotkey.bus_handle, &dev);
 		if (dev->handle)
 			acpi_remove_notify_handler(dev->handle,
-						   ACPI_SYSTEM_NOTIFY,
+						   ACPI_DEVICE_NOTIFY,
 						   acpi_hotkey_notify_handler);
-	} else
-		remove_proc_entry(key->poll_hotkey.action_method,
-				  hotkey_proc_dir);
+		free_hotkey_buffer(key);
+	} else {
+		char  proc_name[80];
+
+		sprintf(proc_name, "%d", key->link.hotkey_standard_num);
+		/*
+		strcat(proc_name, key->poll_hotkey.poll_method);
+		*/
+		remove_proc_entry(proc_name,hotkey_proc_dir);
+		free_poll_hotkey_buffer(key);
+	}
 	kfree(key);
 	return_VOID;
 }
 
+static void
+free_hotkey_buffer(union acpi_hotkey *key)
+{
+	kfree(key->event_hotkey.action_method);
+}
+
+static void
+free_poll_hotkey_buffer(union acpi_hotkey *key)
+{
+	kfree(key->poll_hotkey.action_method);
+	kfree(key->poll_hotkey.poll_method);
+	kfree(key->poll_hotkey.poll_result);
+}
 static int
 init_hotkey_device(union acpi_hotkey *key, char *bus_str, char *action_str,
 		   char *method, int std_num, int external_num)
 {
+	acpi_handle	tmp_handle;
+	acpi_status status = AE_OK;
+
 	ACPI_FUNCTION_TRACE("init_hotkey_device");
 
+	if(std_num < 0 || IS_POLL(std_num) || !key )
+		goto do_fail;
+
+	if(!bus_str || !action_str || !method)
+		goto do_fail;
+
 	key->link.hotkey_type = ACPI_HOTKEY_EVENT;
 	key->link.hotkey_standard_num = std_num;
 	key->event_hotkey.flag = 0;
-	if (is_valid_acpi_path(bus_str))
-		acpi_get_handle((acpi_handle) 0,
-				bus_str, &(key->event_hotkey.bus_handle));
-	else
-		return_VALUE(-ENODEV);
-	key->event_hotkey.external_hotkey_num = external_num;
-	if (is_valid_acpi_path(action_str))
-		acpi_get_handle((acpi_handle) 0,
-				action_str, &(key->event_hotkey.action_handle));
-	key->event_hotkey.action_method = kmalloc(sizeof(method), GFP_KERNEL);
-	strcpy(key->event_hotkey.action_method, method);
+	key->event_hotkey.action_method = method;
 
-	return_VALUE(!is_valid_hotkey(key));
+	status = acpi_get_handle(NULL,bus_str, &(key->event_hotkey.bus_handle));
+	if(ACPI_FAILURE(status))
+		goto do_fail;
+	key->event_hotkey.external_hotkey_num = external_num;
+	status = acpi_get_handle(NULL,action_str, &(key->event_hotkey.action_handle));
+	if(ACPI_FAILURE(status))
+		goto do_fail;
+	status = acpi_get_handle(key->event_hotkey.action_handle,
+				method, &tmp_handle);
+	if (ACPI_FAILURE(status))
+		goto do_fail;
+	return_VALUE(AE_OK);
+do_fail:
+	return_VALUE(-ENODEV);
 }
 
 static int
@@ -495,34 +551,46 @@ init_poll_hotkey_device(union acpi_hotkey *key,
 			char *poll_method,
 			char *action_str, char *action_method, int std_num)
 {
+	acpi_status status = AE_OK;
+	acpi_handle	tmp_handle;
+
 	ACPI_FUNCTION_TRACE("init_poll_hotkey_device");
 
+	if(std_num < 0 || IS_EVENT(std_num) || !key)
+		goto do_fail;
+
+	if(!poll_str || !poll_method || !action_str || !action_method)
+		goto do_fail;
+
 	key->link.hotkey_type = ACPI_HOTKEY_POLLING;
 	key->link.hotkey_standard_num = std_num;
 	key->poll_hotkey.flag = 0;
-	if (is_valid_acpi_path(poll_str))
-		acpi_get_handle((acpi_handle) 0,
-				poll_str, &(key->poll_hotkey.poll_handle));
-	else
-		return_VALUE(-ENODEV);
 	key->poll_hotkey.poll_method = poll_method;
-	if (is_valid_acpi_path(action_str))
-		acpi_get_handle((acpi_handle) 0,
-				action_str, &(key->poll_hotkey.action_handle));
-	key->poll_hotkey.action_method =
-	    kmalloc(sizeof(action_method), GFP_KERNEL);
-	strcpy(key->poll_hotkey.action_method, action_method);
+	key->poll_hotkey.action_method = action_method;
+
+	status = acpi_get_handle(NULL,poll_str, &(key->poll_hotkey.poll_handle));
+	if(ACPI_FAILURE(status))
+		goto do_fail;
+	status = acpi_get_handle(key->poll_hotkey.poll_handle,
+				poll_method, &tmp_handle);
+        if (ACPI_FAILURE(status))
+       		goto do_fail;
+	status = acpi_get_handle(NULL,action_str, &(key->poll_hotkey.action_handle));
+	if (ACPI_FAILURE(status))
+		goto do_fail;
+	status = acpi_get_handle(key->poll_hotkey.action_handle,
+				action_method, &tmp_handle);
+	if (ACPI_FAILURE(status))
+		goto do_fail;
 	key->poll_hotkey.poll_result =
 	    (union acpi_object *)kmalloc(sizeof(union acpi_object), GFP_KERNEL);
-	return_VALUE(is_valid_hotkey(key));
+	if(!key->poll_hotkey.poll_result)
+		goto do_fail;
+	return_VALUE(AE_OK);
+do_fail:
+	return_VALUE(-ENODEV);
 }
 
-static int check_hotkey_valid(union acpi_hotkey *key,
-			      struct acpi_hotkey_list *list)
-{
-	ACPI_FUNCTION_TRACE("check_hotkey_valid");
-	return_VALUE(0);
-}
 
 static int hotkey_open_config(struct inode *inode, struct file *file)
 {
@@ -531,10 +599,17 @@ static int hotkey_open_config(struct inode *inode, struct file *file)
 		     (file, hotkey_config_seq_show, PDE(inode)->data));
 }
 
+static int hotkey_poll_open_config(struct inode *inode, struct file *file)
+{
+	ACPI_FUNCTION_TRACE("hotkey_poll_open_config");
+	return_VALUE(single_open
+		     (file, hotkey_poll_config_seq_show, PDE(inode)->data));
+}
+
 static int hotkey_config_seq_show(struct seq_file *seq, void *offset)
 {
 	struct acpi_hotkey_list *hotkey_list = &global_hotkey_list;
-	struct list_head *entries, *next;
+	struct list_head *entries;
 	char bus_name[ACPI_PATHNAME_MAX] = { 0 };
 	char action_name[ACPI_PATHNAME_MAX] = { 0 };
 	struct acpi_buffer bus = { ACPI_PATHNAME_MAX, bus_name };
@@ -542,10 +617,7 @@ static int hotkey_config_seq_show(struct seq_file *seq, void *offset)
 
 	ACPI_FUNCTION_TRACE(("hotkey_config_seq_show"));
 
-	if (!hotkey_list)
-		goto end;
-
-	list_for_each_safe(entries, next, hotkey_list->entries) {
+	list_for_each(entries, hotkey_list->entries) {
 		union acpi_hotkey *key =
 		    container_of(entries, union acpi_hotkey, entries);
 		if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) {
@@ -553,18 +625,37 @@ static int hotkey_config_seq_show(struct seq_file *seq, void *offset)
 				      ACPI_NAME_TYPE_MAX, &bus);
 			acpi_get_name(key->event_hotkey.action_handle,
 				      ACPI_NAME_TYPE_MAX, &act);
-			seq_printf(seq, "%s:%s:%s:%d:%d", bus_name,
+			seq_printf(seq, "%s:%s:%s:%d:%d\n", bus_name,
 				   action_name,
 				   key->event_hotkey.action_method,
 				   key->link.hotkey_standard_num,
 				   key->event_hotkey.external_hotkey_num);
-		} /* ACPI_HOTKEY_POLLING */
-		else {
+		}
+	}
+	seq_puts(seq, "\n");
+	return_VALUE(0);
+}
+
+static int hotkey_poll_config_seq_show(struct seq_file *seq, void *offset)
+{
+	struct acpi_hotkey_list *hotkey_list = &global_hotkey_list;
+	struct list_head *entries;
+	char bus_name[ACPI_PATHNAME_MAX] = { 0 };
+	char action_name[ACPI_PATHNAME_MAX] = { 0 };
+	struct acpi_buffer bus = { ACPI_PATHNAME_MAX, bus_name };
+	struct acpi_buffer act = { ACPI_PATHNAME_MAX, action_name };
+
+	ACPI_FUNCTION_TRACE(("hotkey_config_seq_show"));
+
+	list_for_each(entries, hotkey_list->entries) {
+		union acpi_hotkey *key =
+		    container_of(entries, union acpi_hotkey, entries);
+		if (key->link.hotkey_type == ACPI_HOTKEY_POLLING) {
 			acpi_get_name(key->poll_hotkey.poll_handle,
 				      ACPI_NAME_TYPE_MAX, &bus);
 			acpi_get_name(key->poll_hotkey.action_handle,
 				      ACPI_NAME_TYPE_MAX, &act);
-			seq_printf(seq, "%s:%s:%s:%s:%d", bus_name,
+			seq_printf(seq, "%s:%s:%s:%s:%d\n", bus_name,
 				   key->poll_hotkey.poll_method,
 				   action_name,
 				   key->poll_hotkey.action_method,
@@ -572,49 +663,83 @@ static int hotkey_config_seq_show(struct seq_file *seq, void *offset)
 		}
 	}
 	seq_puts(seq, "\n");
-      end:
 	return_VALUE(0);
 }
 
 static int
 get_parms(char *config_record,
 	  int *cmd,
-	  char *bus_handle,
-	  char *bus_method,
-	  char *action_handle,
-	  char *method, int *internal_event_num, int *external_event_num)
+	  char **bus_handle,
+	  char **bus_method,
+	  char **action_handle,
+	  char **method, int *internal_event_num, int *external_event_num)
 {
-	char *tmp, *tmp1;
+	char *tmp, *tmp1, count;
 	ACPI_FUNCTION_TRACE(("get_parms"));
 
 	sscanf(config_record, "%d", cmd);
 
+	if(*cmd == 1){
+		if(sscanf(config_record, "%d:%d", cmd, internal_event_num)!=2)
+			goto do_fail;
+		else
+			return (6);
+	}
 	tmp = strchr(config_record, ':');
+	if (!tmp)
+		goto do_fail;
 	tmp++;
 	tmp1 = strchr(tmp, ':');
-	strncpy(bus_handle, tmp, tmp1 - tmp);
-	bus_handle[tmp1 - tmp] = 0;
+	if (!tmp1)
+		goto do_fail;
+
+	count = tmp1 - tmp;
+	*bus_handle = (char *) kmalloc(count+1, GFP_KERNEL);
+	if(!*bus_handle)
+		goto do_fail;
+	strncpy(*bus_handle, tmp, count);
+	*(*bus_handle + count) = 0;
 
 	tmp = tmp1;
 	tmp++;
 	tmp1 = strchr(tmp, ':');
-	strncpy(bus_method, tmp, tmp1 - tmp);
-	bus_method[tmp1 - tmp] = 0;
+	if (!tmp1)
+		goto do_fail;
+	count = tmp1 - tmp;
+	*bus_method = (char *) kmalloc(count+1, GFP_KERNEL);
+	if(!*bus_method)
+		goto do_fail;
+	strncpy(*bus_method, tmp, count);
+	*(*bus_method + count) = 0;
 
 	tmp = tmp1;
 	tmp++;
 	tmp1 = strchr(tmp, ':');
-	strncpy(action_handle, tmp, tmp1 - tmp);
-	action_handle[tmp1 - tmp] = 0;
+	if (!tmp1)
+		goto do_fail;
+	count = tmp1 - tmp;
+	*action_handle = (char *) kmalloc(count+1, GFP_KERNEL);
+	strncpy(*action_handle, tmp, count);
+	*(*action_handle + count) = 0;
 
 	tmp = tmp1;
 	tmp++;
 	tmp1 = strchr(tmp, ':');
-	strncpy(method, tmp, tmp1 - tmp);
-	method[tmp1 - tmp] = 0;
+	if (!tmp1)
+		goto do_fail;
+	count = tmp1 - tmp;
+	*method = (char *) kmalloc(count+1, GFP_KERNEL);
+	if(!*method)
+		goto do_fail;
+	strncpy(*method, tmp, count);
+	*(*method + count) = 0;
+
+	if(sscanf(tmp1 + 1, "%d:%d", internal_event_num, external_event_num)<=0)
+		goto do_fail;
 
-	sscanf(tmp1 + 1, "%d:%d", internal_event_num, external_event_num);
 	return_VALUE(6);
+do_fail:
+	return_VALUE(-1);
 }
 
 /*  count is length for one input record */
@@ -622,135 +747,117 @@ static ssize_t hotkey_write_config(struct file *file,
 				   const char __user * buffer,
 				   size_t count, loff_t * data)
 {
-	struct acpi_hotkey_list *hotkey_list = &global_hotkey_list;
-	char config_record[MAX_CONFIG_RECORD_LEN];
-	char bus_handle[MAX_NAME_PATH_LEN];
-	char bus_method[MAX_NAME_PATH_LEN];
-	char action_handle[MAX_NAME_PATH_LEN];
-	char method[20];
+	char *config_record = NULL;
+	char *bus_handle = NULL;
+	char *bus_method = NULL;
+	char *action_handle = NULL;
+	char *method = NULL;
 	int cmd, internal_event_num, external_event_num;
 	int ret = 0;
 	union acpi_hotkey *key = NULL;
 
 	ACPI_FUNCTION_TRACE(("hotkey_write_config"));
 
-	if (!hotkey_list || count > MAX_CONFIG_RECORD_LEN) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid arguments\n"));
-		return_VALUE(-EINVAL);
-	}
+	config_record = (char *) kmalloc(count+1, GFP_KERNEL);
+	if(!config_record)
+		return_VALUE(-ENOMEM);
 
 	if (copy_from_user(config_record, buffer, count)) {
+		kfree(config_record);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data \n"));
 		return_VALUE(-EINVAL);
 	}
-	config_record[count] = '\0';
+	config_record[count] = 0;
 
 	ret = get_parms(config_record,
 			&cmd,
-			bus_handle,
-			bus_method,
-			action_handle,
-			method, &internal_event_num, &external_event_num);
+			&bus_handle,
+			&bus_method,
+			&action_handle,
+			&method, &internal_event_num, &external_event_num);
+
+	kfree(config_record);
+	if(IS_OTHERS(internal_event_num))
+		goto do_fail;
 	if (ret != 6) {
+do_fail:	
+		kfree(bus_handle);
+		kfree(bus_method);
+		kfree(action_handle);
+		kfree(method);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Invalid data format ret=%d\n", ret));
 		return_VALUE(-EINVAL);
 	}
 
 	key = kmalloc(sizeof(union acpi_hotkey), GFP_KERNEL);
-	ret = init_hotkey_device(key, bus_handle, action_handle, method,
+	if(!key)
+		goto do_fail;
+	memset(key, 0, sizeof(union acpi_hotkey));
+	if(cmd == 1) {
+		union acpi_hotkey *tmp = NULL;
+		tmp = get_hotkey_by_event(&global_hotkey_list,
+				internal_event_num);
+		if(!tmp)
+			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid key"));
+		else
+			memcpy(key, tmp, sizeof(union acpi_hotkey));
+		goto cont_cmd;
+	}
+	if (IS_EVENT(internal_event_num)) {
+		kfree(bus_method);
+		ret = init_hotkey_device(key, bus_handle, action_handle, method,
 				 internal_event_num, external_event_num);
-
-	if (ret || check_hotkey_valid(key, hotkey_list)) {
+	} else
+		ret = init_poll_hotkey_device(key, bus_handle, bus_method,
+				      action_handle, method,
+				      internal_event_num);
+	if (ret) {
+		kfree(bus_handle);
+		kfree(action_handle);
+		if(IS_EVENT(internal_event_num))
+			free_hotkey_buffer(key);
+		else
+			free_poll_hotkey_buffer(key);
 		kfree(key);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid hotkey \n"));
 		return_VALUE(-EINVAL);
 	}
-	switch (cmd) {
-	case 0:
-		hotkey_add(key);
-		break;
-	case 1:
-		hotkey_remove(key);
-		free_hotkey_device(key);
-		break;
-	case 2:
-		hotkey_update(key);
-		break;
-	default:
-		break;
-	}
-	return_VALUE(count);
-}
-
-/*  count is length for one input record */
-static ssize_t hotkey_write_poll_config(struct file *file,
-					const char __user * buffer,
-					size_t count, loff_t * data)
-{
-	struct seq_file *m = (struct seq_file *)file->private_data;
-	struct acpi_hotkey_list *hotkey_list =
-	    (struct acpi_hotkey_list *)m->private;
-
-	char config_record[MAX_CONFIG_RECORD_LEN];
-	char polling_handle[MAX_NAME_PATH_LEN];
-	char action_handle[MAX_NAME_PATH_LEN];
-	char poll_method[20], action_method[20];
-	int ret, internal_event_num, cmd, external_event_num;
-	union acpi_hotkey *key = NULL;
-
-	ACPI_FUNCTION_TRACE("hotkey_write_poll_config");
-
-	if (!hotkey_list || count > MAX_CONFIG_RECORD_LEN) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid arguments\n"));
-		return_VALUE(-EINVAL);
-	}
-
-	if (copy_from_user(config_record, buffer, count)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data \n"));
-		return_VALUE(-EINVAL);
-	}
-	config_record[count] = '\0';
 
-	ret = get_parms(config_record,
-			&cmd,
-			polling_handle,
-			poll_method,
-			action_handle,
-			action_method,
-			&internal_event_num, &external_event_num);
-
-	if (ret != 6) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data format\n"));
-		return_VALUE(-EINVAL);
-	}
+cont_cmd:
+	kfree(bus_handle);
+	kfree(action_handle);
 
-	key = kmalloc(sizeof(union acpi_hotkey), GFP_KERNEL);
-	ret = init_poll_hotkey_device(key, polling_handle, poll_method,
-				      action_handle, action_method,
-				      internal_event_num);
-	if (ret || check_hotkey_valid(key, hotkey_list)) {
-		kfree(key);
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid hotkey \n"));
-		return_VALUE(-EINVAL);
-	}
 	switch (cmd) {
 	case 0:
-		hotkey_add(key);
+		if(get_hotkey_by_event(&global_hotkey_list,key->link.hotkey_standard_num))
+			goto fail_out;
+		else
+			hotkey_add(key);
 		break;
 	case 1:
 		hotkey_remove(key);
 		break;
 	case 2:
-		hotkey_update(key);
+		if(hotkey_update(key))
+			goto fail_out;
 		break;
 	default:
+		goto fail_out;
 		break;
 	}
 	return_VALUE(count);
+fail_out:
+	if(IS_EVENT(internal_event_num))
+		free_hotkey_buffer(key);
+	else
+		free_poll_hotkey_buffer(key);
+	kfree(key);
+	ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "invalid key\n"));
+	return_VALUE(-EINVAL);
 }
 
-/*  
+/*
  * This function evaluates an ACPI method, given an int as parameter, the
  * method is searched within the scope of the handle, can be NULL. The output
  * of the method is written is output, which can also be NULL
@@ -775,7 +882,7 @@ static int write_acpi_int(acpi_handle handle, const char *method, int val,
 	return_VALUE(status == AE_OK);
 }
 
-static int read_acpi_int(acpi_handle handle, const char *method, int *val)
+static int read_acpi_int(acpi_handle handle, const char *method, union acpi_object *val)
 {
 	struct acpi_buffer output;
 	union acpi_object out_obj;
@@ -786,62 +893,32 @@ static int read_acpi_int(acpi_handle handle, const char *method, int *val)
 	output.pointer = &out_obj;
 
 	status = acpi_evaluate_object(handle, (char *)method, NULL, &output);
-	*val = out_obj.integer.value;
+	if(val){
+		val->integer.value = out_obj.integer.value;
+		val->type = out_obj.type;
+	} else
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "null val pointer"));
 	return_VALUE((status == AE_OK)
 		     && (out_obj.type == ACPI_TYPE_INTEGER));
 }
 
-static acpi_handle
-get_handle_from_hotkeylist(struct acpi_hotkey_list *hotkey_list, int event_num)
+static union acpi_hotkey *get_hotkey_by_event(struct
+			      acpi_hotkey_list
+			      *hotkey_list, int event)
 {
-	struct list_head *entries, *next;
-
-	list_for_each_safe(entries, next, hotkey_list->entries) {
-		union acpi_hotkey *key =
-		    container_of(entries, union acpi_hotkey, entries);
-		if (key->link.hotkey_type == ACPI_HOTKEY_EVENT
-		    && key->link.hotkey_standard_num == event_num) {
-			return (key->event_hotkey.action_handle);
-		}
-	}
-	return (NULL);
-}
-
-static
-char *get_method_from_hotkeylist(struct acpi_hotkey_list *hotkey_list,
-				 int event_num)
-{
-	struct list_head *entries, *next;
-
-	list_for_each_safe(entries, next, hotkey_list->entries) {
-		union acpi_hotkey *key =
-		    container_of(entries, union acpi_hotkey, entries);
-
-		if (key->link.hotkey_type == ACPI_HOTKEY_EVENT &&
-		    key->link.hotkey_standard_num == event_num)
-			return (key->event_hotkey.action_method);
-	}
-	return (NULL);
-}
-
-static struct acpi_polling_hotkey *get_hotkey_by_event(struct
-						       acpi_hotkey_list
-						       *hotkey_list, int event)
-{
-	struct list_head *entries, *next;
+	struct list_head *entries;
 
-	list_for_each_safe(entries, next, hotkey_list->entries) {
+	list_for_each(entries, hotkey_list->entries) {
 		union acpi_hotkey *key =
 		    container_of(entries, union acpi_hotkey, entries);
-		if (key->link.hotkey_type == ACPI_HOTKEY_POLLING
-		    && key->link.hotkey_standard_num == event) {
-			return (&key->poll_hotkey);
+		if (key->link.hotkey_standard_num == event) {
+			return(key);
 		}
 	}
-	return (NULL);
+	return(NULL);
 }
 
-/*  
+/*
  * user call AML method interface:
  * Call convention:
  * echo "event_num: arg type : value"
@@ -854,48 +931,56 @@ static ssize_t hotkey_execute_aml_method(struct file *file,
 					 size_t count, loff_t * data)
 {
 	struct acpi_hotkey_list *hotkey_list = &global_hotkey_list;
-	char arg[MAX_CALL_PARM];
-	int event, type, value;
-
-	char *method;
-	acpi_handle handle;
+	char *arg;
+	int event,method_type,type, value;
+	union acpi_hotkey *key;
 
 	ACPI_FUNCTION_TRACE("hotkey_execte_aml_method");
 
-	if (!hotkey_list || count > MAX_CALL_PARM) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument 1"));
-		return_VALUE(-EINVAL);
-	}
+	arg = (char *) kmalloc(count+1, GFP_KERNEL);
+	if(!arg)
+		return_VALUE(-ENOMEM);
+	arg[count]=0;
 
 	if (copy_from_user(arg, buffer, count)) {
+		kfree(arg);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument 2"));
 		return_VALUE(-EINVAL);
 	}
 
-	arg[count] = '\0';
-
-	if (sscanf(arg, "%d:%d:%d", &event, &type, &value) != 3) {
+	if (sscanf(arg, "%d:%d:%d:%d", &event, &method_type, &type, &value) != 4) {
+		kfree(arg);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument 3"));
 		return_VALUE(-EINVAL);
 	}
-
+	kfree(arg);
 	if (type == ACPI_TYPE_INTEGER) {
-		handle = get_handle_from_hotkeylist(hotkey_list, event);
-		method = (char *)get_method_from_hotkeylist(hotkey_list, event);
+		key = get_hotkey_by_event(hotkey_list, event);
+		if(!key)
+			goto do_fail;
 		if (IS_EVENT(event))
-			write_acpi_int(handle, method, value, NULL);
+			write_acpi_int(key->event_hotkey.action_handle,
+					key->event_hotkey.action_method, value, NULL);
 		else if (IS_POLL(event)) {
-			struct acpi_polling_hotkey *key;
-			key = (struct acpi_polling_hotkey *)
-			    get_hotkey_by_event(hotkey_list, event);
-			read_acpi_int(handle, method, key->poll_result);
+			if ( method_type == POLL_METHOD )
+				read_acpi_int(key->poll_hotkey.poll_handle,
+					key->poll_hotkey.poll_method,
+					key->poll_hotkey.poll_result);
+			else if ( method_type == ACTION_METHOD )
+				write_acpi_int(key->poll_hotkey.action_handle,
+					key->poll_hotkey.action_method, value, NULL);
+			else
+				goto do_fail;
+
 		}
 	} else {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Not supported"));
 		return_VALUE(-EINVAL);
 	}
-
 	return_VALUE(count);
+do_fail:
+	return_VALUE(-EINVAL);
+
 }
 
 static int __init hotkey_init(void)
@@ -928,7 +1013,7 @@ static int __init hotkey_init(void)
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Hotkey: Unable to create %s entry\n",
 				  HOTKEY_EV_CONFIG));
-		return (-ENODEV);
+		goto do_fail1;
 	} else {
 		hotkey_config->proc_fops = &hotkey_config_fops;
 		hotkey_config->data = &global_hotkey_list;
@@ -943,7 +1028,8 @@ static int __init hotkey_init(void)
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Hotkey: Unable to create %s entry\n",
 				  HOTKEY_EV_CONFIG));
-		return (-ENODEV);
+
+		goto do_fail2;
 	} else {
 		hotkey_poll_config->proc_fops = &hotkey_poll_config_fops;
 		hotkey_poll_config->data = &global_hotkey_list;
@@ -957,7 +1043,7 @@ static int __init hotkey_init(void)
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Hotkey: Unable to create %s entry\n",
 				  HOTKEY_ACTION));
-		return (-ENODEV);
+		goto do_fail3;
 	} else {
 		hotkey_action->proc_fops = &hotkey_action_fops;
 		hotkey_action->owner = THIS_MODULE;
@@ -970,7 +1056,7 @@ static int __init hotkey_init(void)
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Hotkey: Unable to create %s entry\n",
 				  HOTKEY_INFO));
-		return (-ENODEV);
+		goto do_fail4;
 	} else {
 		hotkey_info->proc_fops = &hotkey_info_fops;
 		hotkey_info->owner = THIS_MODULE;
@@ -979,23 +1065,33 @@ static int __init hotkey_init(void)
 	}
 
 	result = acpi_bus_register_driver(&hotkey_driver);
-	if (result < 0) {
-		remove_proc_entry(HOTKEY_PROC, acpi_root_dir);
-		return (-ENODEV);
-	}
+	if (result < 0)
+		goto do_fail5;
 	global_hotkey_list.count = 0;
 	global_hotkey_list.entries = &hotkey_entries;
 
 	INIT_LIST_HEAD(&hotkey_entries);
 
 	return (0);
+
+do_fail5:
+	remove_proc_entry(HOTKEY_INFO, hotkey_proc_dir);
+do_fail4:
+	remove_proc_entry(HOTKEY_ACTION, hotkey_proc_dir);
+do_fail3:
+	remove_proc_entry(HOTKEY_PL_CONFIG, hotkey_proc_dir);
+do_fail2:
+	remove_proc_entry(HOTKEY_EV_CONFIG, hotkey_proc_dir);
+do_fail1:
+	remove_proc_entry(HOTKEY_PROC, acpi_root_dir);
+	return (-ENODEV);
 }
 
 static void __exit hotkey_exit(void)
 {
 	struct list_head *entries, *next;
 
-	ACPI_FUNCTION_TRACE("hotkey_remove");
+	ACPI_FUNCTION_TRACE("hotkey_exit");
 
 	list_for_each_safe(entries, next, global_hotkey_list.entries) {
 		union acpi_hotkey *key =
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index bdd9f37..7289da3 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -145,10 +145,14 @@ acpi_os_vprintf(const char *fmt, va_list args)
 #endif
 }
 
+extern int acpi_in_resume;
 void *
 acpi_os_allocate(acpi_size size)
 {
-	return kmalloc(size, GFP_KERNEL);
+	if (acpi_in_resume)
+		return kmalloc(size, GFP_ATOMIC);
+	else
+		return kmalloc(size, GFP_KERNEL);
 }
 
 void
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index d1f42b9..bb973d2 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -269,7 +269,51 @@ acpi_pci_irq_del_prt (int segment, int bus)
 /* --------------------------------------------------------------------------
                           PCI Interrupt Routing Support
    -------------------------------------------------------------------------- */
+typedef int (*irq_lookup_func)(struct acpi_prt_entry *, int *, int *, char **);
 
+static int
+acpi_pci_allocate_irq(struct acpi_prt_entry *entry,
+	int	*edge_level,
+	int	*active_high_low,
+	char	**link)
+{
+	int	irq;
+
+	ACPI_FUNCTION_TRACE("acpi_pci_allocate_irq");
+
+	if (entry->link.handle) {
+		irq = acpi_pci_link_allocate_irq(entry->link.handle,
+			entry->link.index, edge_level, active_high_low, link);
+		if (irq < 0) {
+			ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ link routing entry\n"));
+			return_VALUE(-1);
+		}
+	} else {
+		irq = entry->link.index;
+		*edge_level = ACPI_LEVEL_SENSITIVE;
+		*active_high_low = ACPI_ACTIVE_LOW;
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found IRQ %d\n", irq));
+	return_VALUE(irq);
+}
+
+static int
+acpi_pci_free_irq(struct acpi_prt_entry *entry,
+	int	*edge_level,
+	int	*active_high_low,
+	char	**link)
+{
+	int	irq;
+
+	ACPI_FUNCTION_TRACE("acpi_pci_free_irq");
+	if (entry->link.handle) {
+		irq = acpi_pci_link_free_irq(entry->link.handle);
+	} else {
+		irq = entry->link.index;
+	}
+	return_VALUE(irq);
+}
 /*
  * acpi_pci_irq_lookup
  * success: return IRQ >= 0
@@ -282,12 +326,13 @@ acpi_pci_irq_lookup (
 	int			pin,
 	int			*edge_level,
 	int			*active_high_low,
-	char			**link)
+	char			**link,
+	irq_lookup_func		func)
 {
 	struct acpi_prt_entry	*entry = NULL;
 	int segment = pci_domain_nr(bus);
 	int bus_nr = bus->number;
-	int irq;
+	int ret;
 
 	ACPI_FUNCTION_TRACE("acpi_pci_irq_lookup");
 
@@ -301,22 +346,8 @@ acpi_pci_irq_lookup (
 		return_VALUE(-1);
 	}
 	
-	if (entry->link.handle) {
-		irq = acpi_pci_link_get_irq(entry->link.handle,
-			entry->link.index, edge_level, active_high_low, link);
-		if (irq < 0) {
-			ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ link routing entry\n"));
-			return_VALUE(-1);
-		}
-	} else {
-		irq = entry->link.index;
-		*edge_level = ACPI_LEVEL_SENSITIVE;
-		*active_high_low = ACPI_ACTIVE_LOW;
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found IRQ %d\n", irq));
-
-	return_VALUE(irq);
+	ret = func(entry, edge_level, active_high_low, link);
+	return_VALUE(ret);
 }
 
 /*
@@ -330,7 +361,8 @@ acpi_pci_irq_derive (
 	int			pin,
 	int			*edge_level,
 	int			*active_high_low,
-	char			**link)
+	char			**link,
+	irq_lookup_func		func)
 {
 	struct pci_dev		*bridge = dev;
 	int			irq = -1;
@@ -363,7 +395,7 @@ acpi_pci_irq_derive (
 		}
 
 		irq = acpi_pci_irq_lookup(bridge->bus, PCI_SLOT(bridge->devfn),
-			pin, edge_level, active_high_low, link);
+			pin, edge_level, active_high_low, link, func);
 	}
 
 	if (irq < 0) {
@@ -415,7 +447,7 @@ acpi_pci_irq_enable (
 	 * values override any BIOS-assigned IRQs set during boot.
 	 */
  	irq = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
-		&edge_level, &active_high_low, &link);
+		&edge_level, &active_high_low, &link, acpi_pci_allocate_irq);
 
 	/*
 	 * If no PRT entry was found, we'll try to derive an IRQ from the
@@ -423,7 +455,7 @@ acpi_pci_irq_enable (
 	 */
 	if (irq < 0)
  		irq = acpi_pci_irq_derive(dev, pin, &edge_level,
-			&active_high_low, &link);
+			&active_high_low, &link, acpi_pci_allocate_irq);
  
 	/*
 	 * No IRQ known to the ACPI subsystem - maybe the BIOS / 
@@ -462,7 +494,9 @@ acpi_pci_irq_enable (
 EXPORT_SYMBOL(acpi_pci_irq_enable);
 
 
-#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
+/* FIXME: implement x86/x86_64 version */
+void __attribute__((weak)) acpi_unregister_gsi(u32 i) {}
+
 void
 acpi_pci_irq_disable (
 	struct pci_dev		*dev)
@@ -489,14 +523,14 @@ acpi_pci_irq_disable (
 	 * First we check the PCI IRQ routing table (PRT) for an IRQ.
 	 */
  	gsi = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
-				  &edge_level, &active_high_low, NULL);
+			&edge_level, &active_high_low, NULL, acpi_pci_free_irq);
 	/*
 	 * If no PRT entry was found, we'll try to derive an IRQ from the
 	 * device's parent bridge.
 	 */
 	if (gsi < 0)
  		gsi = acpi_pci_irq_derive(dev, pin,
-					  &edge_level, &active_high_low, NULL);
+			&edge_level, &active_high_low, NULL, acpi_pci_free_irq);
 	if (gsi < 0)
 		return_VOID;
 
@@ -512,4 +546,3 @@ acpi_pci_irq_disable (
 
 	return_VOID;
 }
-#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 6ad0e77..834c2ce 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -68,6 +68,10 @@ static struct acpi_driver acpi_pci_link_driver = {
 			},
 };
 
+/*
+ * If a link is initialized, we never change its active and initialized
+ * later even the link is disable. Instead, we just repick the active irq
+ */
 struct acpi_pci_link_irq {
 	u8			active;			/* Current IRQ */
 	u8			edge_level;		/* All IRQs */
@@ -76,8 +80,7 @@ struct acpi_pci_link_irq {
 	u8			possible_count;
 	u8			possible[ACPI_PCI_LINK_MAX_POSSIBLE];
 	u8			initialized:1;
-	u8			suspend_resume:1;
-	u8			reserved:6;
+	u8			reserved:7;
 };
 
 struct acpi_pci_link {
@@ -85,12 +88,14 @@ struct acpi_pci_link {
 	struct acpi_device	*device;
 	acpi_handle		handle;
 	struct acpi_pci_link_irq irq;
+	int			refcnt;
 };
 
 static struct {
 	int			count;
 	struct list_head	entries;
 }				acpi_link;
+DECLARE_MUTEX(acpi_link_lock);
 
 
 /* --------------------------------------------------------------------------
@@ -532,12 +537,12 @@ static int acpi_pci_link_allocate(
 
 	ACPI_FUNCTION_TRACE("acpi_pci_link_allocate");
 
-	if (link->irq.suspend_resume) {
-		acpi_pci_link_set(link, link->irq.active);
-		link->irq.suspend_resume = 0;
-	}
-	if (link->irq.initialized)
+	if (link->irq.initialized) {
+		if (link->refcnt == 0)
+			/* This means the link is disabled but initialized */
+			acpi_pci_link_set(link, link->irq.active);
 		return_VALUE(0);
+	}
 
 	/*
 	 * search for active IRQ in list of possible IRQs.
@@ -596,13 +601,13 @@ static int acpi_pci_link_allocate(
 }
 
 /*
- * acpi_pci_link_get_irq
+ * acpi_pci_link_allocate_irq
  * success: return IRQ >= 0
  * failure: return -1
  */
 
 int
-acpi_pci_link_get_irq (
+acpi_pci_link_allocate_irq (
 	acpi_handle		handle,
 	int			index,
 	int			*edge_level,
@@ -613,7 +618,7 @@ acpi_pci_link_get_irq (
 	struct acpi_device	*device = NULL;
 	struct acpi_pci_link	*link = NULL;
 
-	ACPI_FUNCTION_TRACE("acpi_pci_link_get_irq");
+	ACPI_FUNCTION_TRACE("acpi_pci_link_allocate_irq");
 
 	result = acpi_bus_get_device(handle, &device);
 	if (result) {
@@ -633,21 +638,81 @@ acpi_pci_link_get_irq (
 		return_VALUE(-1);
 	}
 
-	if (acpi_pci_link_allocate(link))
+	down(&acpi_link_lock);
+	if (acpi_pci_link_allocate(link)) {
+		up(&acpi_link_lock);
 		return_VALUE(-1);
+	}
 	   
 	if (!link->irq.active) {
+		up(&acpi_link_lock);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link active IRQ is 0!\n"));
 		return_VALUE(-1);
 	}
+	link->refcnt ++;
+	up(&acpi_link_lock);
 
 	if (edge_level) *edge_level = link->irq.edge_level;
 	if (active_high_low) *active_high_low = link->irq.active_high_low;
 	if (name) *name = acpi_device_bid(link->device);
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		"Link %s is referenced\n", acpi_device_bid(link->device)));
 	return_VALUE(link->irq.active);
 }
 
+/*
+ * We don't change link's irq information here.  After it is reenabled, we
+ * continue use the info
+ */
+int
+acpi_pci_link_free_irq(acpi_handle handle)
+{
+	struct acpi_device	*device = NULL;
+	struct acpi_pci_link	*link = NULL;
+	acpi_status		result;
+
+	ACPI_FUNCTION_TRACE("acpi_pci_link_free_irq");
+
+	result = acpi_bus_get_device(handle, &device);
+	if (result) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link device\n"));
+		return_VALUE(-1);
+	}
+
+	link = (struct acpi_pci_link *) acpi_driver_data(device);
+	if (!link) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
+		return_VALUE(-1);
+	}
+
+	down(&acpi_link_lock);
+	if (!link->irq.initialized) {
+		up(&acpi_link_lock);
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link isn't initialized\n"));
+		return_VALUE(-1);
+	}
 
+#ifdef	FUTURE_USE
+	/*
+	 * The Link reference count allows us to _DISable an unused link
+	 * and suspend time, and set it again  on resume.
+	 * However, 2.6.12 still has irq_router.resume
+	 * which blindly restores the link state.
+	 * So we disable the reference count method
+	 * to prevent duplicate acpi_pci_link_set()
+	 * which would harm some systems
+	 */
+	link->refcnt --;
+#endif
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		"Link %s is dereferenced\n", acpi_device_bid(link->device)));
+
+	if (link->refcnt == 0) {
+		acpi_ut_evaluate_object(link->handle, "_DIS", 0, NULL);
+	}
+	up(&acpi_link_lock);
+	return_VALUE(link->irq.active);
+}
 /* --------------------------------------------------------------------------
                                  Driver Interface
    -------------------------------------------------------------------------- */
@@ -677,6 +742,7 @@ acpi_pci_link_add (
 	strcpy(acpi_device_class(device), ACPI_PCI_LINK_CLASS);
 	acpi_driver_data(device) = link;
 
+	down(&acpi_link_lock);
 	result = acpi_pci_link_get_possible(link);
 	if (result)
 		goto end;
@@ -712,6 +778,7 @@ acpi_pci_link_add (
 end:
 	/* disable all links -- to be activated on use */
 	acpi_ut_evaluate_object(link->handle, "_DIS", 0, NULL);
+	up(&acpi_link_lock);
 
 	if (result)
 		kfree(link);
@@ -720,24 +787,42 @@ end:
 }
 
 static int
-irqrouter_suspend(
-	struct sys_device *dev,
-	u32	state)
+acpi_pci_link_resume(
+	struct acpi_pci_link *link)
+{
+	ACPI_FUNCTION_TRACE("acpi_pci_link_resume");
+
+	if (link->refcnt && link->irq.active && link->irq.initialized)
+		return_VALUE(acpi_pci_link_set(link, link->irq.active));
+	else
+		return_VALUE(0);
+}
+
+/*
+ * FIXME: this is a workaround to avoid nasty warning.  It will be removed
+ * after every device calls pci_disable_device in .resume.
+ */
+int acpi_in_resume;
+static int
+irqrouter_resume(
+	struct sys_device *dev)
 {
 	struct list_head        *node = NULL;
 	struct acpi_pci_link    *link = NULL;
 
-	ACPI_FUNCTION_TRACE("irqrouter_suspend");
+	ACPI_FUNCTION_TRACE("irqrouter_resume");
 
+	acpi_in_resume = 1;
 	list_for_each(node, &acpi_link.entries) {
 		link = list_entry(node, struct acpi_pci_link, node);
 		if (!link) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
+			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				"Invalid link context\n"));
 			continue;
 		}
-		if (link->irq.active && link->irq.initialized)
-			link->irq.suspend_resume = 1;
+		acpi_pci_link_resume(link);
 	}
+	acpi_in_resume = 0;
 	return_VALUE(0);
 }
 
@@ -756,8 +841,9 @@ acpi_pci_link_remove (
 
 	link = (struct acpi_pci_link *) acpi_driver_data(device);
 
-	/* TBD: Acquire/release lock */
+	down(&acpi_link_lock);
 	list_del(&link->node);
+	up(&acpi_link_lock);
 
 	kfree(link);
 
@@ -849,9 +935,10 @@ int __init acpi_irq_balance_set(char *str)
 __setup("acpi_irq_balance", acpi_irq_balance_set);
 
 
+/* FIXME: we will remove this interface after all drivers call pci_disable_device */
 static struct sysdev_class irqrouter_sysdev_class = {
         set_kset_name("irqrouter"),
-        .suspend = irqrouter_suspend,
+        .resume = irqrouter_resume,
 };
 
 
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 893b074..2c04740 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -81,30 +81,32 @@ module_param(bm_history, uint, 0644);
  *
  * To skip this limit, boot/load with a large max_cstate limit.
  */
-static int no_c2c3(struct dmi_system_id *id)
+static int set_max_cstate(struct dmi_system_id *id)
 {
 	if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
 		return 0;
 
-	printk(KERN_NOTICE PREFIX "%s detected - C2,C3 disabled."
+	printk(KERN_NOTICE PREFIX "%s detected - limiting to C%ld max_cstate."
 		" Override with \"processor.max_cstate=%d\"\n", id->ident,
-	       ACPI_PROCESSOR_MAX_POWER + 1);
+		(long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1);
 
-	max_cstate = 1;
+	max_cstate = (long)id->driver_data;
 
 	return 0;
 }
 
 
-
-
 static struct dmi_system_id __initdata processor_power_dmi_table[] = {
-	{ no_c2c3, "IBM ThinkPad R40e", {
+	{ set_max_cstate, "IBM ThinkPad R40e", {
 	  DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
-	  DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW") }},
-	{ no_c2c3, "Medion 41700", {
+	  DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW") }, (void*)1},
+	{ set_max_cstate, "Medion 41700", {
+	  DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
+	  DMI_MATCH(DMI_BIOS_VERSION,"R01-A1J") }, (void*)1},
+	{ set_max_cstate, "Clevo 5600D", {
 	  DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
-	  DMI_MATCH(DMI_BIOS_VERSION,"R01-A1J") }},
+	  DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307") },
+	  (void*)2},
 	{},
 };
 
@@ -549,7 +551,8 @@ static int acpi_processor_get_power_info_default_c1 (struct acpi_processor *pr)
 	ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1");
 
 	for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
-		memset(pr->power.states, 0, sizeof(struct acpi_processor_cx));
+		memset(&(pr->power.states[i]), 0, 
+		       sizeof(struct acpi_processor_cx));
 
 	/* if info is obtained from pblk/fadt, type equals state */
 	pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
@@ -580,7 +583,8 @@ static int acpi_processor_get_power_info_cst (struct acpi_processor *pr)
 
 	pr->power.count = 0;
 	for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
-		memset(pr->power.states, 0, sizeof(struct acpi_processor_cx));
+		memset(&(pr->power.states[i]), 0, 
+		       sizeof(struct acpi_processor_cx));
 
 	status = acpi_evaluate_object(pr->handle, "_CST", NULL, &buffer);
 	if (ACPI_FAILURE(status)) {
@@ -763,7 +767,6 @@ static void acpi_processor_power_verify_c3(
 	}
 
 	if (pr->flags.bm_check) {
-		printk("Disabling BM access before entering C3\n");
 		/* bus mastering control is necessary */
 		if (!pr->flags.bm_control) {
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@@ -771,7 +774,6 @@ static void acpi_processor_power_verify_c3(
 			return_VOID;
 		}
 	} else {
-		printk("Invalidating cache before entering C3\n");
 		/*
 		 * WBINVD should be set in fadt, for C3 state to be
 		 * supported on when bm_check is not required.
@@ -842,7 +844,7 @@ static int acpi_processor_get_power_info (
 	result = acpi_processor_get_power_info_cst(pr);
 	if ((result) || (acpi_processor_power_verify(pr) < 2)) {
 		result = acpi_processor_get_power_info_fadt(pr);
-		if (result)
+		if ((result) || (acpi_processor_power_verify(pr) < 2))
 			result = acpi_processor_get_power_info_default_c1(pr);
 	}
 
diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c
index de5746e..2435a7c 100644
--- a/drivers/block/cfq-iosched.c
+++ b/drivers/block/cfq-iosched.c
@@ -1281,6 +1281,7 @@ dispatch:
 			 */
 			if (!cfq_crq_in_driver(crq) &&
 			    !cfq_cfqq_idle_window(cfqq) &&
+			    !blk_barrier_rq(rq) &&
 			    cfqd->rq_in_driver >= cfqd->cfq_max_depth)
 				return NULL;
 
diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c
index 692a5fc..3c81854 100644
--- a/drivers/block/ll_rw_blk.c
+++ b/drivers/block/ll_rw_blk.c
@@ -719,7 +719,7 @@ struct request *blk_queue_find_tag(request_queue_t *q, int tag)
 {
 	struct blk_queue_tag *bqt = q->queue_tags;
 
-	if (unlikely(bqt == NULL || tag >= bqt->max_depth))
+	if (unlikely(bqt == NULL || tag >= bqt->real_max_depth))
 		return NULL;
 
 	return bqt->tag_index[tag];
@@ -798,6 +798,7 @@ init_tag_map(request_queue_t *q, struct blk_queue_tag *tags, int depth)
 
 	memset(tag_index, 0, depth * sizeof(struct request *));
 	memset(tag_map, 0, nr_ulongs * sizeof(unsigned long));
+	tags->real_max_depth = depth;
 	tags->max_depth = depth;
 	tags->tag_index = tag_index;
 	tags->tag_map = tag_map;
@@ -872,11 +873,22 @@ int blk_queue_resize_tags(request_queue_t *q, int new_depth)
 		return -ENXIO;
 
 	/*
+	 * if we already have large enough real_max_depth.  just
+	 * adjust max_depth.  *NOTE* as requests with tag value
+	 * between new_depth and real_max_depth can be in-flight, tag
+	 * map can not be shrunk blindly here.
+	 */
+	if (new_depth <= bqt->real_max_depth) {
+		bqt->max_depth = new_depth;
+		return 0;
+	}
+
+	/*
 	 * save the old state info, so we can copy it back
 	 */
 	tag_index = bqt->tag_index;
 	tag_map = bqt->tag_map;
-	max_depth = bqt->max_depth;
+	max_depth = bqt->real_max_depth;
 
 	if (init_tag_map(q, bqt, new_depth))
 		return -ENOMEM;
@@ -913,7 +925,7 @@ void blk_queue_end_tag(request_queue_t *q, struct request *rq)
 
 	BUG_ON(tag == -1);
 
-	if (unlikely(tag >= bqt->max_depth))
+	if (unlikely(tag >= bqt->real_max_depth))
 		/*
 		 * This can happen after tag depth has been reduced.
 		 * FIXME: how about a warning or info message here?
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
index 2771c86..f696da6 100644
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -367,11 +367,8 @@ static inline void bpa10x_free_urb(struct urb *urb)
 	if (!urb)
 		return;
 
-	if (urb->setup_packet)
-		kfree(urb->setup_packet);
-
-	if (urb->transfer_buffer)
-		kfree(urb->transfer_buffer);
+	kfree(urb->setup_packet);
+	kfree(urb->transfer_buffer);
 
 	usb_free_urb(urb);
 }
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index c0ed213..858fddb 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -58,8 +58,6 @@
 #ifndef CONFIG_BT_HCIUART_DEBUG
 #undef  BT_DBG
 #define BT_DBG( A... )
-#undef  BT_DMP
-#define BT_DMP( A... )
 #endif
 
 static int hciextn = 1;
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index ade94a5..533323b 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -57,8 +57,6 @@
 #ifndef CONFIG_BT_HCIUART_DEBUG
 #undef  BT_DBG
 #define BT_DBG( A... )
-#undef  BT_DMP
-#define BT_DMP( A... )
 #endif
 
 /* Initialize protocol */
@@ -125,7 +123,6 @@ static inline int h4_check_data_len(struct h4_struct *h4, int len)
 
 	BT_DBG("len %d room %d", len, room);
 	if (!len) {
-		BT_DMP(h4->rx_skb->data, h4->rx_skb->len);
 		hci_recv_frame(h4->rx_skb);
 	} else if (len > room) {
 		BT_ERR("Data length is too large");
@@ -169,8 +166,6 @@ static int h4_recv(struct hci_uart *hu, void *data, int count)
 			case H4_W4_DATA:
 				BT_DBG("Complete data");
 
-				BT_DMP(h4->rx_skb->data, h4->rx_skb->len);
-
 				hci_recv_frame(h4->rx_skb);
 
 				h4->rx_state = H4_W4_PACKET_TYPE;
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index f766bc2..90be2ea 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -57,8 +57,6 @@
 #ifndef CONFIG_BT_HCIUART_DEBUG
 #undef  BT_DBG
 #define BT_DBG( A... )
-#undef  BT_DMP
-#define BT_DMP( A... )
 #endif
 
 static int reset = 0;
diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
index b120ecf..657719b 100644
--- a/drivers/bluetooth/hci_usb.c
+++ b/drivers/bluetooth/hci_usb.c
@@ -57,8 +57,6 @@
 #ifndef CONFIG_BT_HCIUSB_DEBUG
 #undef  BT_DBG
 #define BT_DBG(D...)
-#undef  BT_DMP
-#define BT_DMP(D...)
 #endif
 
 #ifndef CONFIG_BT_HCIUSB_ZERO_PACKET
@@ -110,6 +108,9 @@ static struct usb_device_id blacklist_ids[] = {
 	/* Microsoft Wireless Transceiver for Bluetooth 2.0 */
 	{ USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET },
 
+	/* Kensington Bluetooth USB adapter */
+	{ USB_DEVICE(0x047d, 0x105d), .driver_info = HCI_RESET },
+
 	/* ISSC Bluetooth Adapter v3.1 */
 	{ USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET },
 
@@ -387,10 +388,8 @@ static void hci_usb_unlink_urbs(struct hci_usb *husb)
 			urb = &_urb->urb;
 			BT_DBG("%s freeing _urb %p type %d urb %p",
 					husb->hdev->name, _urb, _urb->type, urb);
-			if (urb->setup_packet)
-				kfree(urb->setup_packet);
-			if (urb->transfer_buffer)
-				kfree(urb->transfer_buffer);
+			kfree(urb->setup_packet);
+			kfree(urb->transfer_buffer);
 			_urb_free(_urb);
 		}
 
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 4218738..850a78c 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -261,7 +261,11 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
 
 static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
 {
-        unsigned long long val;
+	unsigned long pfn;
+
+	/* Turn a kernel-virtual address into a physical page frame */
+	pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
+
 	/*
 	 * RED-PEN: on some architectures there is more mapped memory
 	 * than available in mem_map which pfn_valid checks
@@ -269,10 +273,10 @@ static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
 	 *
 	 * RED-PEN: vmalloc is not supported right now.
 	 */
-	if (!pfn_valid(vma->vm_pgoff))
+	if (!pfn_valid(pfn))
 		return -EIO;
-	val = (u64)vma->vm_pgoff << PAGE_SHIFT;
-	vma->vm_pgoff = __pa(val) >> PAGE_SHIFT;
+
+	vma->vm_pgoff = pfn;
 	return mmap_mem(file, vma);
 }
 
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index d8f9e94..cd4fe8b 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -1209,6 +1209,7 @@ static int rtc_proc_open(struct inode *inode, struct file *file)
 
 void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 {
+	unsigned long uip_watchdog = jiffies;
 	unsigned char ctrl;
 #ifdef CONFIG_MACH_DECSTATION
 	unsigned int real_year;
@@ -1224,8 +1225,10 @@ void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 	 * Once the read clears, read the RTC time (again via ioctl). Easy.
 	 */
 
-	if (rtc_is_updating() != 0)
-		msleep(20);
+	while (rtc_is_updating() != 0 && jiffies - uip_watchdog < 2*HZ/100) {
+		barrier();
+		cpu_relax();
+	}
 
 	/*
 	 * Only the values that we read from the RTC are set. We leave
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 94a3b3e..79e9832 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -17,6 +17,8 @@ config TCG_TPM
 	  obtained at: <http://sourceforge.net/projects/trousers>.  To 
 	  compile this driver as a module, choose M here; the module 
 	  will be called tpm. If unsure, say N.
+	  Note: For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI_BUS
+	  and CONFIG_PNPACPI.
 
 config TCG_NSC
 	tristate "National Semiconductor TPM Interface"
@@ -36,12 +38,13 @@ config TCG_ATMEL
 	  as a module, choose M here; the module will be called tpm_atmel.
 
 config TCG_INFINEON
-	tristate "Infineon Technologies SLD 9630 TPM Interface"
-	depends on TCG_TPM
+	tristate "Infineon Technologies TPM Interface"
+	depends on TCG_TPM && PNPACPI
 	---help---
 	  If you have a TPM security chip from Infineon Technologies
-	  say Yes and it will be accessible from within Linux.  To
-	  compile this driver as a module, choose M here; the module
+	  (either SLD 9630 TT 1.1 or SLB 9635 TT 1.2) say Yes and it
+	  will be accessible from within Linux.
+	  To compile this driver as a module, choose M here; the module
 	  will be called tpm_infineon.
 	  Further information on this driver and the supported hardware
 	  can be found at http://www.prosec.rub.de/tpm
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 0e32416..dc8c540 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -1,7 +1,7 @@
 /*
  * Description:
  * Device Driver for the Infineon Technologies
- * SLD 9630 TT Trusted Platform Module
+ * SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module
  * Specifications at www.trustedcomputinggroup.org
  *
  * Copyright (C) 2005, Marcel Selhorst <selhorst@crypto.rub.de>
@@ -12,9 +12,10 @@
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation, version 2 of the
  * License.
- *
  */
 
+#include <acpi/acpi_bus.h>
+#include <linux/pnp.h>
 #include "tpm.h"
 
 /* Infineon specific definitions */
@@ -26,8 +27,11 @@
 #define	TPM_MSLEEP_TIME 	3
 /* gives number of max. msleep()-calls before throwing timeout */
 #define	TPM_MAX_TRIES		5000
-#define	TCPA_INFINEON_DEV_VEN_VALUE	0x15D1
-#define	TPM_DATA 			(TPM_ADDR + 1) & 0xff
+#define	TPM_INFINEON_DEV_VEN_VALUE	0x15D1
+
+/* These values will be filled after ACPI-call */
+static int TPM_INF_DATA = 0;
+static int TPM_INF_ADDR = 0;
 
 /* TPM header definitions */
 enum infineon_tpm_header {
@@ -305,9 +309,10 @@ static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count)
 
 static void tpm_inf_cancel(struct tpm_chip *chip)
 {
-	/* Nothing yet!
-	   This has something to do with the internal functions
-	   of the TPM. Abort isn't really necessary...
+	/*
+	   Since we are using the legacy mode to communicate
+	   with the TPM, we have no cancel functions, but have
+	   a workaround for interrupting the TPM through WTX.
 	 */
 }
 
@@ -345,6 +350,32 @@ static struct tpm_vendor_specific tpm_inf = {
 	.miscdev = {.fops = &inf_ops,},
 };
 
+static const struct pnp_device_id tpm_pnp_tbl[] = {
+	/* Infineon TPMs */
+	{"IFX0101", 0},
+	{"IFX0102", 0},
+	{"", 0}
+};
+
+static int __devinit tpm_inf_acpi_probe(struct pnp_dev *dev,
+					const struct pnp_device_id *dev_id)
+{
+	TPM_INF_ADDR = (pnp_port_start(dev, 0) & 0xff);
+	TPM_INF_DATA = ((TPM_INF_ADDR + 1) & 0xff);
+	tpm_inf.base = pnp_port_start(dev, 1);
+	dev_info(&dev->dev, "Found %s with ID %s\n",
+		 dev->name, dev_id->id);
+	if (!((tpm_inf.base >> 8) & 0xff))
+		tpm_inf.base = 0;
+	return 0;
+}
+
+static struct pnp_driver tpm_inf_pnp = {
+	.name = "tpm_inf_pnp",
+	.id_table = tpm_pnp_tbl,
+	.probe = tpm_inf_acpi_probe,
+};
+
 static int __devinit tpm_inf_probe(struct pci_dev *pci_dev,
 				   const struct pci_device_id *pci_id)
 {
@@ -353,64 +384,99 @@ static int __devinit tpm_inf_probe(struct pci_dev *pci_dev,
 	int vendorid[2];
 	int version[2];
 	int productid[2];
+	char chipname[20];
 
 	if (pci_enable_device(pci_dev))
 		return -EIO;
 
 	dev_info(&pci_dev->dev, "LPC-bus found at 0x%x\n", pci_id->device);
 
+	/* read IO-ports from ACPI */
+	pnp_register_driver(&tpm_inf_pnp);
+	pnp_unregister_driver(&tpm_inf_pnp);
+
+	/* Make sure, we have received valid config ports */
+	if (!TPM_INF_ADDR) {
+		pci_disable_device(pci_dev);
+		return -EIO;
+	}
+
 	/* query chip for its vendor, its version number a.s.o. */
-	outb(ENABLE_REGISTER_PAIR, TPM_ADDR);
-	outb(IDVENL, TPM_ADDR);
-	vendorid[1] = inb(TPM_DATA);
-	outb(IDVENH, TPM_ADDR);
-	vendorid[0] = inb(TPM_DATA);
-	outb(IDPDL, TPM_ADDR);
-	productid[1] = inb(TPM_DATA);
-	outb(IDPDH, TPM_ADDR);
-	productid[0] = inb(TPM_DATA);
-	outb(CHIP_ID1, TPM_ADDR);
-	version[1] = inb(TPM_DATA);
-	outb(CHIP_ID2, TPM_ADDR);
-	version[0] = inb(TPM_DATA);
-
-	if ((vendorid[0] << 8 | vendorid[1]) == (TCPA_INFINEON_DEV_VEN_VALUE)) {
-
-		/* read IO-ports from TPM */
-		outb(IOLIMH, TPM_ADDR);
-		ioh = inb(TPM_DATA);
-		outb(IOLIML, TPM_ADDR);
-		iol = inb(TPM_DATA);
-		tpm_inf.base = (ioh << 8) | iol;
+	outb(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
+	outb(IDVENL, TPM_INF_ADDR);
+	vendorid[1] = inb(TPM_INF_DATA);
+	outb(IDVENH, TPM_INF_ADDR);
+	vendorid[0] = inb(TPM_INF_DATA);
+	outb(IDPDL, TPM_INF_ADDR);
+	productid[1] = inb(TPM_INF_DATA);
+	outb(IDPDH, TPM_INF_ADDR);
+	productid[0] = inb(TPM_INF_DATA);
+	outb(CHIP_ID1, TPM_INF_ADDR);
+	version[1] = inb(TPM_INF_DATA);
+	outb(CHIP_ID2, TPM_INF_ADDR);
+	version[0] = inb(TPM_INF_DATA);
+
+	switch ((productid[0] << 8) | productid[1]) {
+	case 6:
+		sprintf(chipname, " (SLD 9630 TT 1.1)");
+		break;
+	case 11:
+		sprintf(chipname, " (SLB 9635 TT 1.2)");
+		break;
+	default:
+		sprintf(chipname, " (unknown chip)");
+		break;
+	}
+	chipname[19] = 0;
+
+	if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) {
 
 		if (tpm_inf.base == 0) {
-			dev_err(&pci_dev->dev, "No IO-ports set!\n");
+			dev_err(&pci_dev->dev, "No IO-ports found!\n");
 			pci_disable_device(pci_dev);
-			return -ENODEV;
+			return -EIO;
+		}
+		/* configure TPM with IO-ports */
+		outb(IOLIMH, TPM_INF_ADDR);
+		outb(((tpm_inf.base >> 8) & 0xff), TPM_INF_DATA);
+		outb(IOLIML, TPM_INF_ADDR);
+		outb((tpm_inf.base & 0xff), TPM_INF_DATA);
+
+		/* control if IO-ports are set correctly */
+		outb(IOLIMH, TPM_INF_ADDR);
+		ioh = inb(TPM_INF_DATA);
+		outb(IOLIML, TPM_INF_ADDR);
+		iol = inb(TPM_INF_DATA);
+
+		if ((ioh << 8 | iol) != tpm_inf.base) {
+			dev_err(&pci_dev->dev,
+				"Could not set IO-ports to %04x\n",
+				tpm_inf.base);
+			pci_disable_device(pci_dev);
+			return -EIO;
 		}
 
 		/* activate register */
-		outb(TPM_DAR, TPM_ADDR);
-		outb(0x01, TPM_DATA);
-		outb(DISABLE_REGISTER_PAIR, TPM_ADDR);
+		outb(TPM_DAR, TPM_INF_ADDR);
+		outb(0x01, TPM_INF_DATA);
+		outb(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
 
 		/* disable RESET, LP and IRQC */
 		outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD);
 
 		/* Finally, we're done, print some infos */
 		dev_info(&pci_dev->dev, "TPM found: "
+			 "config base 0x%x, "
 			 "io base 0x%x, "
 			 "chip version %02x%02x, "
 			 "vendor id %x%x (Infineon), "
 			 "product id %02x%02x"
 			 "%s\n",
+			 TPM_INF_ADDR,
 			 tpm_inf.base,
 			 version[0], version[1],
 			 vendorid[0], vendorid[1],
-			 productid[0], productid[1], ((productid[0] == 0)
-						      && (productid[1] ==
-							  6)) ?
-			 " (SLD 9630 TT 1.1)" : "");
+			 productid[0], productid[1], chipname);
 
 		rc = tpm_register_hardware(pci_dev, &tpm_inf);
 		if (rc < 0) {
@@ -462,6 +528,6 @@ module_init(init_inf);
 module_exit(cleanup_inf);
 
 MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>");
-MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT");
-MODULE_VERSION("1.4");
+MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
+MODULE_VERSION("1.5");
 MODULE_LICENSE("GPL");
diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
index f975dab..a13395e 100644
--- a/drivers/char/watchdog/i8xx_tco.c
+++ b/drivers/char/watchdog/i8xx_tco.c
@@ -1,5 +1,5 @@
 /*
- *	i8xx_tco 0.07:	TCO timer driver for i8xx chipsets
+ *	i8xx_tco:	TCO timer driver for i8xx chipsets
  *
  *	(c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
  *				http://www.kernelconcepts.de
@@ -63,6 +63,9 @@
  *  20050128 Wim Van Sebroeck <wim@iguana.be>
  *	0.07 Added support for the ICH4-M, ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW
  *	     chipsets. Also added support for the "undocumented" ICH7 chipset.
+ *  20050807 Wim Van Sebroeck <wim@iguana.be>
+ *	0.08 Make sure that the watchdog is only "armed" when started.
+ *	     (Kernel Bug 4251)
  */
 
 /*
@@ -87,7 +90,7 @@
 #include "i8xx_tco.h"
 
 /* Module and version information */
-#define TCO_VERSION "0.07"
+#define TCO_VERSION "0.08"
 #define TCO_MODULE_NAME "i8xx TCO timer"
 #define TCO_DRIVER_NAME   TCO_MODULE_NAME ", v" TCO_VERSION
 #define PFX TCO_MODULE_NAME ": "
@@ -125,10 +128,18 @@ static int tco_timer_start (void)
 	unsigned char val;
 
 	spin_lock(&tco_lock);
+
+	/* disable chipset's NO_REBOOT bit */
+	pci_read_config_byte (i8xx_tco_pci, 0xd4, &val);
+	val &= 0xfd;
+	pci_write_config_byte (i8xx_tco_pci, 0xd4, val);
+
+	/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
 	val = inb (TCO1_CNT + 1);
 	val &= 0xf7;
 	outb (val, TCO1_CNT + 1);
 	val = inb (TCO1_CNT + 1);
+
 	spin_unlock(&tco_lock);
 
 	if (val & 0x08)
@@ -138,13 +149,20 @@ static int tco_timer_start (void)
 
 static int tco_timer_stop (void)
 {
-	unsigned char val;
+	unsigned char val, val1;
 
 	spin_lock(&tco_lock);
+	/* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
 	val = inb (TCO1_CNT + 1);
 	val |= 0x08;
 	outb (val, TCO1_CNT + 1);
 	val = inb (TCO1_CNT + 1);
+
+	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
+	pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
+	val1 |= 0x02;
+	pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
+
 	spin_unlock(&tco_lock);
 
 	if ((val & 0x08) == 0)
@@ -155,6 +173,7 @@ static int tco_timer_stop (void)
 static int tco_timer_keepalive (void)
 {
 	spin_lock(&tco_lock);
+	/* Reload the timer by writing to the TCO Timer Reload register */
 	outb (0x01, TCO1_RLD);
 	spin_unlock(&tco_lock);
 	return 0;
@@ -417,9 +436,8 @@ static unsigned char __init i8xx_tco_getdevice (void)
 			printk (KERN_ERR PFX "failed to get TCOBASE address\n");
 			return 0;
 		}
-		/*
-		 * Check chipset's NO_REBOOT bit
-		 */
+
+		/* Check chipset's NO_REBOOT bit */
 		pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
 		if (val1 & 0x02) {
 			val1 &= 0xfd;
@@ -430,6 +448,10 @@ static unsigned char __init i8xx_tco_getdevice (void)
 				return 0;	/* Cannot reset NO_REBOOT bit */
 			}
 		}
+		/* Disable reboots untill the watchdog starts */
+		val1 |= 0x02;
+		pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
+
 		/* Set the TCO_EN bit in SMI_EN register */
 		if (!request_region (SMI_EN + 1, 1, "i8xx TCO")) {
 			printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
@@ -505,17 +527,10 @@ out:
 
 static void __exit watchdog_cleanup (void)
 {
-	u8 val;
-
 	/* Stop the timer before we leave */
 	if (!nowayout)
 		tco_timer_stop ();
 
-	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
-	pci_read_config_byte (i8xx_tco_pci, 0xd4, &val);
-	val |= 0x02;
-	pci_write_config_byte (i8xx_tco_pci, 0xd4, val);
-
 	/* Deregister */
 	misc_deregister (&i8xx_tco_miscdev);
 	unregister_reboot_notifier(&i8xx_tco_notifier);
diff --git a/drivers/char/watchdog/sa1100_wdt.c b/drivers/char/watchdog/sa1100_wdt.c
index 1b21326..fb88b40 100644
--- a/drivers/char/watchdog/sa1100_wdt.c
+++ b/drivers/char/watchdog/sa1100_wdt.c
@@ -36,13 +36,10 @@
 #include <asm/uaccess.h>
 
 #define OSCR_FREQ		CLOCK_TICK_RATE
-#define SA1100_CLOSE_MAGIC	(0x5afc4453)
 
 static unsigned long sa1100wdt_users;
-static int expect_close;
 static int pre_margin;
 static int boot_status;
-static int nowayout = WATCHDOG_NOWAYOUT;
 
 /*
  *	Allow only one person to hold it open
@@ -62,55 +59,33 @@ static int sa1100dog_open(struct inode *inode, struct file *file)
 }
 
 /*
- *	Shut off the timer.
- * 	Lock it in if it's a module and we defined ...NOWAYOUT
- *	Oddly, the watchdog can only be enabled, but we can turn off
- *	the interrupt, which appears to prevent the watchdog timing out.
+ * The watchdog cannot be disabled.
+ *
+ * Previous comments suggested that turning off the interrupt by
+ * clearing OIER[E3] would prevent the watchdog timing out but this
+ * does not appear to be true (at least on the PXA255).
  */
 static int sa1100dog_release(struct inode *inode, struct file *file)
 {
-	OSMR3 = OSCR + pre_margin;
-
-	if (expect_close == SA1100_CLOSE_MAGIC) {
-		OIER &= ~OIER_E3;
-	} else {
-		printk(KERN_CRIT "WATCHDOG: WDT device closed unexpectedly.  WDT will not stop!\n");
-	}
+	printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n");
 
 	clear_bit(1, &sa1100wdt_users);
-	expect_close = 0;
 
 	return 0;
 }
 
 static ssize_t sa1100dog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
 {
-	if (len) {
-		if (!nowayout) {
-			size_t i;
-
-			expect_close = 0;
-
-			for (i = 0; i != len; i++) {
-				char c;
-
-				if (get_user(c, data + i))
-					return -EFAULT;
-				if (c == 'V')
-					expect_close = SA1100_CLOSE_MAGIC;
-			}
-		}
+	if (len)
 		/* Refresh OSMR3 timer. */
 		OSMR3 = OSCR + pre_margin;
-	}
 
 	return len;
 }
 
 static struct watchdog_info ident = {
-	.options	= WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
-			  WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-	.identity	= "SA1100 Watchdog",
+	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity	= "SA1100/PXA255 Watchdog",
 };
 
 static int sa1100dog_ioctl(struct inode *inode, struct file *file,
@@ -172,7 +147,7 @@ static struct file_operations sa1100dog_fops =
 static struct miscdevice sa1100dog_miscdev =
 {
 	.minor		= WATCHDOG_MINOR,
-	.name		= "SA1100/PXA2xx watchdog",
+	.name		= "watchdog",
 	.fops		= &sa1100dog_fops,
 };
 
@@ -194,7 +169,6 @@ static int __init sa1100dog_init(void)
 	if (ret == 0)
 		printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
 		       margin);
-
 	return ret;
 }
 
@@ -212,8 +186,5 @@ MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
 module_param(margin, int, 0);
 MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
 
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
-
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/fc4/fc.c b/drivers/fc4/fc.c
index 5d961f5..e4710d1 100644
--- a/drivers/fc4/fc.c
+++ b/drivers/fc4/fc.c
@@ -1004,8 +1004,8 @@ int fcp_scsi_dev_reset(Scsi_Cmnd *SCpnt)
 		return FAILED;
 	}
 	fc->rst_pkt->eh_state = SCSI_STATE_UNUSED;
-	return SUCCESS;
 #endif
+	return SUCCESS;
 }
 
 static int __fcp_scsi_host_reset(Scsi_Cmnd *SCpnt)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 04adde6..9ad3e92 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -382,100 +382,6 @@ static void __exit fsl_i2c_exit(void)
 module_init(fsl_i2c_init);
 module_exit(fsl_i2c_exit);
 
-static int fsl_i2c_probe(struct device *device)
-{
-	int result = 0;
-	struct mpc_i2c *i2c;
-	struct platform_device *pdev = to_platform_device(device);
-	struct fsl_i2c_platform_data *pdata;
-	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
-
-	if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) {
-		return -ENOMEM;
-	}
-	memset(i2c, 0, sizeof(*i2c));
-
-	i2c->irq = platform_get_irq(pdev, 0);
-	i2c->flags = pdata->device_flags;
-	init_waitqueue_head(&i2c->queue);
-
-	i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION);
-
-	if (!i2c->base) {
-		printk(KERN_ERR "i2c-mpc - failed to map controller\n");
-		result = -ENOMEM;
-		goto fail_map;
-	}
-
-	if (i2c->irq != 0)
-		if ((result = request_irq(i2c->irq, mpc_i2c_isr,
-					  SA_SHIRQ, "i2c-mpc", i2c)) < 0) {
-			printk(KERN_ERR
-			       "i2c-mpc - failed to attach interrupt\n");
-			goto fail_irq;
-		}
-
-	mpc_i2c_setclock(i2c);
-	dev_set_drvdata(device, i2c);
-
-	i2c->adap = mpc_ops;
-	i2c_set_adapdata(&i2c->adap, i2c);
-	i2c->adap.dev.parent = &pdev->dev;
-	if ((result = i2c_add_adapter(&i2c->adap)) < 0) {
-		printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
-		goto fail_add;
-	}
-
-	return result;
-
-      fail_add:
-	if (i2c->irq != 0)
-		free_irq(i2c->irq, NULL);
-      fail_irq:
-	iounmap(i2c->base);
-      fail_map:
-	kfree(i2c);
-	return result;
-};
-
-static int fsl_i2c_remove(struct device *device)
-{
-	struct mpc_i2c *i2c = dev_get_drvdata(device);
-
-	i2c_del_adapter(&i2c->adap);
-	dev_set_drvdata(device, NULL);
-
-	if (i2c->irq != 0)
-		free_irq(i2c->irq, i2c);
-
-	iounmap(i2c->base);
-	kfree(i2c);
-	return 0;
-};
-
-/* Structure for a device driver */
-static struct device_driver fsl_i2c_driver = {
-	.name = "fsl-i2c",
-	.bus = &platform_bus_type,
-	.probe = fsl_i2c_probe,
-	.remove = fsl_i2c_remove,
-};
-
-static int __init fsl_i2c_init(void)
-{
-	return driver_register(&fsl_i2c_driver);
-}
-
-static void __exit fsl_i2c_exit(void)
-{
-	driver_unregister(&fsl_i2c_driver);
-}
-
-module_init(fsl_i2c_init);
-module_exit(fsl_i2c_exit);
-
 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
 MODULE_DESCRIPTION
     ("I2C-Bus adapter for MPC107 bridge and MPC824x/85xx/52xx processors");
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 1c99536..fa503ed 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -23,8 +23,8 @@
 #include <asm/sibyte/sb1250_smbus.h>
 
 static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
-	{ NULL, 0, (void *) (KSEG1+A_SMB_BASE(0)) },
-	{ NULL, 1, (void *) (KSEG1+A_SMB_BASE(1)) }
+	{ NULL, 0, (void *) (CKSEG1+A_SMB_BASE(0)) },
+	{ NULL, 1, (void *) (CKSEG1+A_SMB_BASE(1)) }
 };
 
 static struct i2c_adapter sibyte_board_adapter[2] = {
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index f9c1acb4..c9d3a00 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -1220,7 +1220,7 @@ static int ide_disk_probe(struct device *dev)
 		goto failed;
 
 	g = alloc_disk_node(1 << PARTN_BITS,
-			pcibus_to_node(drive->hwif->pci_dev->bus));
+			hwif_to_node(drive->hwif));
 	if (!g)
 		goto out_free_idkp;
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 7df85af..c1128ae 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -978,8 +978,7 @@ static int ide_init_queue(ide_drive_t *drive)
 	 *	do not.
 	 */
 
-	q = blk_init_queue_node(do_ide_request, &ide_lock,
-				pcibus_to_node(drive->hwif->pci_dev->bus));
+	q = blk_init_queue_node(do_ide_request, &ide_lock, hwif_to_node(hwif));
 	if (!q)
 		return 1;
 
@@ -1048,6 +1047,8 @@ static int init_irq (ide_hwif_t *hwif)
 
 	BUG_ON(in_interrupt());
 	BUG_ON(irqs_disabled());	
+	BUG_ON(hwif == NULL);
+
 	down(&ide_cfg_sem);
 	hwif->hwgroup = NULL;
 #if MAX_HWIFS > 1
@@ -1097,7 +1098,7 @@ static int init_irq (ide_hwif_t *hwif)
 		spin_unlock_irq(&ide_lock);
 	} else {
 		hwgroup = kmalloc_node(sizeof(ide_hwgroup_t), GFP_KERNEL,
-			pcibus_to_node(hwif->drives[0].hwif->pci_dev->bus));
+					hwif_to_node(hwif->drives[0].hwif));
 		if (!hwgroup)
 	       		goto out_up;
 
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 0374743..f1d1ec4 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -508,5 +508,5 @@ static void __exit exit_ide_cs(void)
 	BUG_ON(dev_list != NULL);
 }
 
-module_init(init_ide_cs);
+late_initcall(init_ide_cs);
 module_exit(exit_ide_cs);
diff --git a/drivers/infiniband/include/ib_cm.h b/drivers/infiniband/include/ib_cm.h
index e5d74a7..da65011 100644
--- a/drivers/infiniband/include/ib_cm.h
+++ b/drivers/infiniband/include/ib_cm.h
@@ -169,7 +169,8 @@ enum ib_cm_rej_reason {
 	IB_CM_REJ_INVALID_ALT_TRAFFIC_CLASS	= __constant_htons(21),
 	IB_CM_REJ_INVALID_ALT_HOP_LIMIT		= __constant_htons(22),
 	IB_CM_REJ_INVALID_ALT_PACKET_RATE	= __constant_htons(23),
-	IB_CM_REJ_PORT_REDIRECT			= __constant_htons(24),
+	IB_CM_REJ_PORT_CM_REDIRECT		= __constant_htons(24),
+	IB_CM_REJ_PORT_REDIRECT			= __constant_htons(25),
 	IB_CM_REJ_INVALID_MTU			= __constant_htons(26),
 	IB_CM_REJ_INSUFFICIENT_RESP_RESOURCES	= __constant_htons(27),
 	IB_CM_REJ_CONSUMER_DEFINED		= __constant_htons(28),
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 6f60abb..fa00816 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -600,9 +600,10 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 			ipoib_mcast_send(dev, (union ib_gid *) (phdr->hwaddr + 4), skb);
 		} else {
-			/* unicast GID -- should be ARP reply */
+			/* unicast GID -- should be ARP or RARP reply */
 
-			if (be16_to_cpup((u16 *) skb->data) != ETH_P_ARP) {
+			if ((be16_to_cpup((__be16 *) skb->data) != ETH_P_ARP) &&
+			    (be16_to_cpup((__be16 *) skb->data) != ETH_P_RARP)) {
 				ipoib_warn(priv, "Unicast, no %s: type %04x, QPN %06x "
 					   IPOIB_GID_FMT "\n",
 					   skb->dst ? "neigh" : "dst",
diff --git a/drivers/input/gameport/ns558.c b/drivers/input/gameport/ns558.c
index 1ab5f2d..70f0518 100644
--- a/drivers/input/gameport/ns558.c
+++ b/drivers/input/gameport/ns558.c
@@ -275,9 +275,9 @@ static int __init ns558_init(void)
 
 static void __exit ns558_exit(void)
 {
-	struct ns558 *ns558;
+	struct ns558 *ns558, *safe;
 
-	list_for_each_entry(ns558, &ns558_list, node) {
+	list_for_each_entry_safe(ns558, safe, &ns558_list, node) {
 		gameport_unregister_port(ns558->gameport);
 		release_region(ns558->io & ~(ns558->size - 1), ns558->size);
 		kfree(ns558);
diff --git a/drivers/isdn/icn/icn.c b/drivers/isdn/icn/icn.c
index e0d1b01..386df71 100644
--- a/drivers/isdn/icn/icn.c
+++ b/drivers/isdn/icn/icn.c
@@ -1650,7 +1650,7 @@ static void __exit icn_exit(void)
 {
 	isdn_ctrl cmd;
 	icn_card *card = cards;
-	icn_card *last;
+	icn_card *last, *tmpcard;
 	int i;
 	unsigned long flags;
 
@@ -1670,8 +1670,9 @@ static void __exit icn_exit(void)
 			for (i = 0; i < ICN_BCH; i++)
 				icn_free_queue(card, i);
 		}
-		card = card->next;
+		tmpcard = card->next;
 		spin_unlock_irqrestore(&card->lock, flags);
+		card = tmpcard;
 	}
 	card = cards;
 	cards = NULL;
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 70bca95..41df4cd 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -818,8 +818,7 @@ int bitmap_unplug(struct bitmap *bitmap)
 	return 0;
 }
 
-static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset,
-	unsigned long sectors, int in_sync);
+static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset);
 /* * bitmap_init_from_disk -- called at bitmap_create time to initialize
  * the in-memory bitmap from the on-disk bitmap -- also, sets up the
  * memory mapping of the bitmap file
@@ -828,7 +827,7 @@ static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset,
  *   previously kicked from the array, we mark all the bits as
  *   1's in order to cause a full resync.
  */
-static int bitmap_init_from_disk(struct bitmap *bitmap, int in_sync)
+static int bitmap_init_from_disk(struct bitmap *bitmap)
 {
 	unsigned long i, chunks, index, oldindex, bit;
 	struct page *page = NULL, *oldpage = NULL;
@@ -929,8 +928,7 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, int in_sync)
 		}
 		if (test_bit(bit, page_address(page))) {
 			/* if the disk bit is set, set the memory bit */
-			bitmap_set_memory_bits(bitmap,
-					i << CHUNK_BLOCK_SHIFT(bitmap), 1, in_sync);
+			bitmap_set_memory_bits(bitmap, i << CHUNK_BLOCK_SHIFT(bitmap));
 			bit_cnt++;
 		}
 	}
@@ -1426,35 +1424,53 @@ void bitmap_close_sync(struct bitmap *bitmap)
 	}
 }
 
-static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset,
-				   unsigned long sectors, int in_sync)
+static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset)
 {
 	/* For each chunk covered by any of these sectors, set the
-	 * counter to 1 and set resync_needed unless in_sync.  They should all
+	 * counter to 1 and set resync_needed.  They should all
 	 * be 0 at this point
 	 */
-	while (sectors) {
-		int secs;
-		bitmap_counter_t *bmc;
-		spin_lock_irq(&bitmap->lock);
-		bmc = bitmap_get_counter(bitmap, offset, &secs, 1);
-		if (!bmc) {
-			spin_unlock_irq(&bitmap->lock);
-			return;
-		}
-		if (! *bmc) {
-			struct page *page;
-			*bmc = 1 | (in_sync? 0 : NEEDED_MASK);
-			bitmap_count_page(bitmap, offset, 1);
-			page = filemap_get_page(bitmap, offset >> CHUNK_BLOCK_SHIFT(bitmap));
-			set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
-		}
+
+	int secs;
+	bitmap_counter_t *bmc;
+	spin_lock_irq(&bitmap->lock);
+	bmc = bitmap_get_counter(bitmap, offset, &secs, 1);
+	if (!bmc) {
 		spin_unlock_irq(&bitmap->lock);
-		if (sectors > secs)
-			sectors -= secs;
-		else
-			sectors = 0;
+		return;
+	}
+	if (! *bmc) {
+		struct page *page;
+		*bmc = 1 | NEEDED_MASK;
+		bitmap_count_page(bitmap, offset, 1);
+		page = filemap_get_page(bitmap, offset >> CHUNK_BLOCK_SHIFT(bitmap));
+		set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
 	}
+	spin_unlock_irq(&bitmap->lock);
+
+}
+
+/*
+ * flush out any pending updates
+ */
+void bitmap_flush(mddev_t *mddev)
+{
+	struct bitmap *bitmap = mddev->bitmap;
+	int sleep;
+
+	if (!bitmap) /* there was no bitmap */
+		return;
+
+	/* run the daemon_work three time to ensure everything is flushed
+	 * that can be
+	 */
+	sleep = bitmap->daemon_sleep;
+	bitmap->daemon_sleep = 0;
+	bitmap_daemon_work(bitmap);
+	bitmap_daemon_work(bitmap);
+	bitmap_daemon_work(bitmap);
+	bitmap->daemon_sleep = sleep;
+	bitmap_update_sb(bitmap);
 }
 
 /*
@@ -1565,7 +1581,8 @@ int bitmap_create(mddev_t *mddev)
 
 	/* now that we have some pages available, initialize the in-memory
 	 * bitmap from the on-disk bitmap */
-	err = bitmap_init_from_disk(bitmap, mddev->recovery_cp == MaxSector);
+	err = bitmap_init_from_disk(bitmap);
+
 	if (err)
 		return err;
 
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 12031c9..b08df8b 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -1230,7 +1230,7 @@ static int __init dm_mirror_init(void)
 	if (r)
 		return r;
 
-	_kmirrord_wq = create_workqueue("kmirrord");
+	_kmirrord_wq = create_singlethread_workqueue("kmirrord");
 	if (!_kmirrord_wq) {
 		DMERR("couldn't start kmirrord");
 		dm_dirty_log_exit();
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 6580e0f..480f658 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1798,6 +1798,8 @@ static int do_md_stop(mddev_t * mddev, int ro)
 				goto out;
 			mddev->ro = 1;
 		} else {
+			bitmap_flush(mddev);
+			wait_event(mddev->sb_wait, atomic_read(&mddev->pending_writes)==0);
 			if (mddev->ro)
 				set_disk_ro(disk, 0);
 			blk_queue_make_request(mddev->queue, md_fail_request);
@@ -3484,7 +3486,6 @@ static void md_do_sync(mddev_t *mddev)
 			goto skip;
 		}
 		ITERATE_MDDEV(mddev2,tmp) {
-			printk(".");
 			if (mddev2 == mddev)
 				continue;
 			if (mddev2->curr_resync && 
@@ -4007,3 +4008,4 @@ EXPORT_SYMBOL(md_wakeup_thread);
 EXPORT_SYMBOL(md_print_devices);
 EXPORT_SYMBOL(md_check_recovery);
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("md");
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index d3a64a0..51d9645 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -893,7 +893,6 @@ static int end_sync_read(struct bio *bio, unsigned int bytes_done, int error)
 	if (!uptodate) {
 		md_error(r1_bio->mddev,
 			 conf->mirrors[r1_bio->read_disk].rdev);
-		set_bit(R1BIO_Degraded, &r1_bio->state);
 	} else
 		set_bit(R1BIO_Uptodate, &r1_bio->state);
 	rdev_dec_pending(conf->mirrors[r1_bio->read_disk].rdev, conf->mddev);
@@ -918,10 +917,9 @@ static int end_sync_write(struct bio *bio, unsigned int bytes_done, int error)
 			mirror = i;
 			break;
 		}
-	if (!uptodate) {
+	if (!uptodate)
 		md_error(mddev, conf->mirrors[mirror].rdev);
-		set_bit(R1BIO_Degraded, &r1_bio->state);
-	}
+
 	update_head_pos(mirror, r1_bio);
 
 	if (atomic_dec_and_test(&r1_bio->remaining)) {
@@ -1109,6 +1107,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 	int i;
 	int write_targets = 0;
 	int sync_blocks;
+	int still_degraded = 0;
 
 	if (!conf->r1buf_pool)
 	{
@@ -1137,7 +1136,10 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 		return 0;
 	}
 
-	if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, mddev->degraded) &&
+	/* before building a request, check if we can skip these blocks..
+	 * This call the bitmap_start_sync doesn't actually record anything
+	 */
+	if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 1) &&
 	    !conf->fullsync) {
 		/* We can skip this block, and probably several more */
 		*skipped = 1;
@@ -1203,24 +1205,23 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 		if (i == disk) {
 			bio->bi_rw = READ;
 			bio->bi_end_io = end_sync_read;
-		} else if (conf->mirrors[i].rdev &&
-			   !conf->mirrors[i].rdev->faulty &&
-			   (!conf->mirrors[i].rdev->in_sync ||
-			    sector_nr + RESYNC_SECTORS > mddev->recovery_cp)) {
+		} else if (conf->mirrors[i].rdev == NULL ||
+			   conf->mirrors[i].rdev->faulty) {
+			still_degraded = 1;
+			continue;
+		} else if (!conf->mirrors[i].rdev->in_sync ||
+			   sector_nr + RESYNC_SECTORS > mddev->recovery_cp) {
 			bio->bi_rw = WRITE;
 			bio->bi_end_io = end_sync_write;
 			write_targets ++;
 		} else
+			/* no need to read or write here */
 			continue;
 		bio->bi_sector = sector_nr + conf->mirrors[i].rdev->data_offset;
 		bio->bi_bdev = conf->mirrors[i].rdev->bdev;
 		bio->bi_private = r1_bio;
 	}
 
-	if (write_targets + 1 < conf->raid_disks)
-		/* array degraded, can't clear bitmap */
-		set_bit(R1BIO_Degraded, &r1_bio->state);
-
 	if (write_targets == 0) {
 		/* There is nowhere to write, so all non-sync
 		 * drives must be failed - so we are finished
@@ -1243,7 +1244,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 			break;
 		if (sync_blocks == 0) {
 			if (!bitmap_start_sync(mddev->bitmap, sector_nr,
-					&sync_blocks, mddev->degraded) &&
+					&sync_blocks, still_degraded) &&
 					!conf->fullsync)
 				break;
 			if (sync_blocks < (PAGE_SIZE>>9))
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 4698d5f..43f231a 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1653,6 +1653,7 @@ static int run (mddev_t *mddev)
 
 	/* device size must be a multiple of chunk size */
 	mddev->size &= ~(mddev->chunk_size/1024 -1);
+	mddev->resync_max_sectors = mddev->size << 1;
 
 	if (!conf->chunk_size || conf->chunk_size % 4) {
 		printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
diff --git a/drivers/md/raid6main.c b/drivers/md/raid6main.c
index f5ee168..495dee1 100644
--- a/drivers/md/raid6main.c
+++ b/drivers/md/raid6main.c
@@ -1813,6 +1813,7 @@ static int run (mddev_t *mddev)
 
 	/* device size must be a multiple of chunk size */
 	mddev->size &= ~(mddev->chunk_size/1024 -1);
+	mddev->resync_max_sectors = mddev->size << 1;
 
 	if (conf->raid_disks < 4) {
 		printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index e83256d..a50a41f 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -188,7 +188,7 @@ config DVB_BCM3510
 	  support this frontend.
 
 config DVB_LGDT330X
-	tristate "LGDT3302 or LGDT3303 based (DViCO FusionHDTV Gold)"
+	tristate "LG Electronics LGDT3302/LGDT3303 based"
 	depends on DVB_CORE
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index 5264310..536c35d 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -225,6 +225,22 @@ struct dvb_pll_desc dvb_pll_tua6034 = {
 };
 EXPORT_SYMBOL(dvb_pll_tua6034);
 
+/* Infineon TUA6034
+ * used in LG Innotek TDVS-H062F
+ */
+struct dvb_pll_desc dvb_pll_tdvs_tua6034 = {
+	.name  = "LG/Infineon TUA6034",
+	.min   =  54000000,
+	.max   = 863000000,
+	.count = 3,
+	.entries = {
+		{  160000000, 44000000, 62500, 0xce, 0x01 },
+		{  455000000, 44000000, 62500, 0xce, 0x02 },
+		{  999999999, 44000000, 62500, 0xce, 0x04 },
+	},
+};
+EXPORT_SYMBOL(dvb_pll_tdvs_tua6034);
+
 /* Philips FMD1216ME
  * used in Medion Hybrid PCMCIA card and USB Box
  */
diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h
index cb79475..205b2d1 100644
--- a/drivers/media/dvb/frontends/dvb-pll.h
+++ b/drivers/media/dvb/frontends/dvb-pll.h
@@ -31,6 +31,7 @@ extern struct dvb_pll_desc dvb_pll_unknown_1;
 extern struct dvb_pll_desc dvb_pll_tua6010xs;
 extern struct dvb_pll_desc dvb_pll_env57h1xd5;
 extern struct dvb_pll_desc dvb_pll_tua6034;
+extern struct dvb_pll_desc dvb_pll_tdvs_tua6034;
 extern struct dvb_pll_desc dvb_pll_tda665x;
 extern struct dvb_pll_desc dvb_pll_fmd1216me;
 extern struct dvb_pll_desc dvb_pll_tded4;
diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c
index e94dee5..1f1cd7a 100644
--- a/drivers/media/dvb/frontends/lgdt330x.c
+++ b/drivers/media/dvb/frontends/lgdt330x.c
@@ -1,11 +1,8 @@
 /*
- *    Support for LGDT3302 & LGDT3303 (DViCO FusionHDTV Gold) - VSB/QAM
+ *    Support for LGDT3302 and LGDT3303 - VSB/QAM
  *
  *    Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
  *
- *    Based on code from  Kirk Lapray <kirk_lapray@bigfoot.com>
- *                           Copyright (C) 2005
- *
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
  *    the Free Software Foundation; either version 2 of the License, or
@@ -25,11 +22,13 @@
 /*
  *                      NOTES ABOUT THIS DRIVER
  *
- * This driver supports DViCO FusionHDTV Gold under Linux.
+ * This Linux driver supports:
+ *   DViCO FusionHDTV 3 Gold-Q
+ *   DViCO FusionHDTV 3 Gold-T
+ *   DViCO FusionHDTV 5 Gold
  *
  * TODO:
- * BER and signal strength always return 0.
- * Include support for LGDT3303
+ * signal strength always returns 0.
  *
  */
 
@@ -41,7 +40,6 @@
 #include <asm/byteorder.h>
 
 #include "dvb_frontend.h"
-#include "dvb-pll.h"
 #include "lgdt330x_priv.h"
 #include "lgdt330x.h"
 
@@ -70,55 +68,37 @@ struct lgdt330x_state
 	u32 current_frequency;
 };
 
-static int i2c_writebytes (struct lgdt330x_state* state,
-			   u8 addr, /* demod_address or pll_address */
+static int i2c_write_demod_bytes (struct lgdt330x_state* state,
 			   u8 *buf, /* data bytes to send */
 			   int len  /* number of bytes to send */ )
 {
-	u8 tmp[] = { buf[0], buf[1] };
 	struct i2c_msg msg =
-		{ .addr = addr, .flags = 0, .buf = tmp,  .len = 2 };
-	int err;
+		{ .addr = state->config->demod_address,
+		  .flags = 0,
+		  .buf = buf,
+		  .len = 2 };
 	int i;
+	int err;
 
-	for (i=1; i<len; i++) {
-		tmp[1] = buf[i];
+	for (i=0; i<len-1; i+=2){
 		if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
-			printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
+			printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, msg.buf[0], msg.buf[1], err);
 			if (err < 0)
 				return err;
 			else
 				return -EREMOTEIO;
 		}
-		tmp[0]++;
+		msg.buf += 2;
 	}
 	return 0;
 }
 
-#if 0
-static int i2c_readbytes (struct lgdt330x_state* state,
-			  u8 addr, /* demod_address or pll_address */
-			  u8 *buf, /* holds data bytes read */
-			  int len  /* number of bytes to read */ )
-{
-	struct i2c_msg msg =
-		{ .addr = addr, .flags = I2C_M_RD, .buf = buf,  .len = len };
-	int err;
-
-	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
-		printk(KERN_WARNING "lgdt330x: %s error (addr %02x, err == %i)\n", __FUNCTION__, addr, err);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-#endif
-
 /*
  * This routine writes the register (reg) to the demod bus
  * then reads the data returned for (len) bytes.
  */
 
-static u8 i2c_selectreadbytes (struct lgdt330x_state* state,
+static u8 i2c_read_demod_bytes (struct lgdt330x_state* state,
 			       enum I2C_REG reg, u8* buf, int len)
 {
 	u8 wr [] = { reg };
@@ -139,7 +119,7 @@ static u8 i2c_selectreadbytes (struct lgdt330x_state* state,
 }
 
 /* Software reset */
-int lgdt330x_SwReset(struct lgdt330x_state* state)
+static int lgdt3302_SwReset(struct lgdt330x_state* state)
 {
 	u8 ret;
 	u8 reset[] = {
@@ -148,23 +128,51 @@ int lgdt330x_SwReset(struct lgdt330x_state* state)
 		      *	bits 5-0 are 1 to mask interrupts */
 	};
 
-	ret = i2c_writebytes(state,
-			     state->config->demod_address,
+	ret = i2c_write_demod_bytes(state,
+			     reset, sizeof(reset));
+	if (ret == 0) {
+
+		/* force reset high (inactive) and unmask interrupts */
+		reset[1] = 0x7f;
+		ret = i2c_write_demod_bytes(state,
+				     reset, sizeof(reset));
+	}
+	return ret;
+}
+
+static int lgdt3303_SwReset(struct lgdt330x_state* state)
+{
+	u8 ret;
+	u8 reset[] = {
+		0x02,
+		0x00 /* bit 0 is active low software reset */
+	};
+
+	ret = i2c_write_demod_bytes(state,
 			     reset, sizeof(reset));
 	if (ret == 0) {
-		/* spec says reset takes 100 ns why wait */
-		/* mdelay(100);    */ /* keep low for 100mS */
-		reset[1] = 0x7f;      /* force reset high (inactive)
-				       * and unmask interrupts */
-		ret = i2c_writebytes(state,
-				     state->config->demod_address,
+
+		/* force reset high (inactive) */
+		reset[1] = 0x01;
+		ret = i2c_write_demod_bytes(state,
 				     reset, sizeof(reset));
 	}
-	/* Spec does not indicate a need for this either */
-	/*mdelay(5); */               /* wait 5 msec before doing more */
 	return ret;
 }
 
+static int lgdt330x_SwReset(struct lgdt330x_state* state)
+{
+	switch (state->config->demod_chip) {
+	case LGDT3302:
+		return lgdt3302_SwReset(state);
+	case LGDT3303:
+		return lgdt3303_SwReset(state);
+	default:
+		return -ENODEV;
+	}
+}
+
+
 static int lgdt330x_init(struct dvb_frontend* fe)
 {
 	/* Hardware reset is done using gpio[0] of cx23880x chip.
@@ -173,22 +181,98 @@ static int lgdt330x_init(struct dvb_frontend* fe)
 	 * Maybe there needs to be a callable function in cx88-core or
 	 * the caller of this function needs to do it. */
 
-	dprintk("%s entered\n", __FUNCTION__);
-	return lgdt330x_SwReset((struct lgdt330x_state*) fe->demodulator_priv);
+	/*
+	 * Array of byte pairs <address, value>
+	 * to initialize each different chip
+	 */
+	static u8 lgdt3302_init_data[] = {
+		/* Use 50MHz parameter values from spec sheet since xtal is 50 */
+		/* Change the value of NCOCTFV[25:0] of carrier
+		   recovery center frequency register */
+		VSB_CARRIER_FREQ0, 0x00,
+		VSB_CARRIER_FREQ1, 0x87,
+		VSB_CARRIER_FREQ2, 0x8e,
+		VSB_CARRIER_FREQ3, 0x01,
+		/* Change the TPCLK pin polarity
+		   data is valid on falling clock */
+		DEMUX_CONTROL, 0xfb,
+		/* Change the value of IFBW[11:0] of
+		   AGC IF/RF loop filter bandwidth register */
+		AGC_RF_BANDWIDTH0, 0x40,
+		AGC_RF_BANDWIDTH1, 0x93,
+		AGC_RF_BANDWIDTH2, 0x00,
+		/* Change the value of bit 6, 'nINAGCBY' and
+		   'NSSEL[1:0] of ACG function control register 2 */
+		AGC_FUNC_CTRL2, 0xc6,
+		/* Change the value of bit 6 'RFFIX'
+		   of AGC function control register 3 */
+		AGC_FUNC_CTRL3, 0x40,
+		/* Set the value of 'INLVTHD' register 0x2a/0x2c
+		   to 0x7fe */
+		AGC_DELAY0, 0x07,
+		AGC_DELAY2, 0xfe,
+		/* Change the value of IAGCBW[15:8]
+		   of inner AGC loop filter bandwith */
+		AGC_LOOP_BANDWIDTH0, 0x08,
+		AGC_LOOP_BANDWIDTH1, 0x9a
+	};
+
+	static u8 lgdt3303_init_data[] = {
+		0x4c, 0x14
+	};
+
+	struct lgdt330x_state* state = fe->demodulator_priv;
+	char  *chip_name;
+	int    err;
+
+	switch (state->config->demod_chip) {
+	case LGDT3302:
+		chip_name = "LGDT3302";
+		err = i2c_write_demod_bytes(state, lgdt3302_init_data,
+									sizeof(lgdt3302_init_data));
+  		break;
+	case LGDT3303:
+		chip_name = "LGDT3303";
+		err = i2c_write_demod_bytes(state, lgdt3303_init_data,
+									sizeof(lgdt3303_init_data));
+  		break;
+	default:
+		chip_name = "undefined";
+		printk (KERN_WARNING "Only LGDT3302 and LGDT3303 are supported chips.\n");
+		err = -ENODEV;
+	}
+	dprintk("%s entered as %s\n", __FUNCTION__, chip_name);
+	if (err < 0)
+		return err;
+	return lgdt330x_SwReset(state);
 }
 
 static int lgdt330x_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	*ber = 0; /* Dummy out for now */
+	*ber = 0; /* Not supplied by the demod chips */
 	return 0;
 }
 
 static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
+	struct lgdt330x_state* state = fe->demodulator_priv;
+	int err;
 	u8 buf[2];
 
-	i2c_selectreadbytes(state, PACKET_ERR_COUNTER1, buf, sizeof(buf));
+	switch (state->config->demod_chip) {
+	case LGDT3302:
+		err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1,
+								  buf, sizeof(buf));
+  		break;
+	case LGDT3303:
+		err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1,
+								  buf, sizeof(buf));
+  		break;
+	default:
+		printk(KERN_WARNING
+			   "Only LGDT3302 and LGDT3303 are supported chips.\n");
+		err = -ENODEV;
+	}
 
 	*ucblocks = (buf[0] << 8) | buf[1];
 	return 0;
@@ -197,123 +281,113 @@ static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 static int lgdt330x_set_parameters(struct dvb_frontend* fe,
 				   struct dvb_frontend_parameters *param)
 {
-	struct lgdt330x_state* state =
-		(struct lgdt330x_state*) fe->demodulator_priv;
+	/*
+	 * Array of byte pairs <address, value>
+	 * to initialize 8VSB for lgdt3303 chip 50 MHz IF
+	 */
+	static u8 lgdt3303_8vsb_44_data[] = {
+		0x04, 0x00,
+		0x0d, 0x40,
+        0x0e, 0x87,
+        0x0f, 0x8e,
+        0x10, 0x01,
+        0x47, 0x8b };
+
+	/*
+	 * Array of byte pairs <address, value>
+	 * to initialize QAM for lgdt3303 chip
+	 */
+	static u8 lgdt3303_qam_data[] = {
+		0x04, 0x00,
+		0x0d, 0x00,
+		0x0e, 0x00,
+		0x0f, 0x00,
+		0x10, 0x00,
+		0x51, 0x63,
+		0x47, 0x66,
+		0x48, 0x66,
+		0x4d, 0x1a,
+		0x49, 0x08,
+		0x4a, 0x9b };
+
+	struct lgdt330x_state* state = fe->demodulator_priv;
 
-	/* Use 50MHz parameter values from spec sheet since xtal is 50 */
 	static u8 top_ctrl_cfg[]   = { TOP_CONTROL, 0x03 };
-	static u8 vsb_freq_cfg[]   = { VSB_CARRIER_FREQ0, 0x00, 0x87, 0x8e, 0x01 };
-	static u8 demux_ctrl_cfg[] = { DEMUX_CONTROL, 0xfb };
-	static u8 agc_rf_cfg[]     = { AGC_RF_BANDWIDTH0, 0x40, 0x93, 0x00 };
-	static u8 agc_ctrl_cfg[]   = { AGC_FUNC_CTRL2, 0xc6, 0x40 };
-	static u8 agc_delay_cfg[]  = { AGC_DELAY0, 0x07, 0x00, 0xfe };
-	static u8 agc_loop_cfg[]   = { AGC_LOOP_BANDWIDTH0, 0x08, 0x9a };
 
+	int err;
 	/* Change only if we are actually changing the modulation */
 	if (state->current_modulation != param->u.vsb.modulation) {
 		switch(param->u.vsb.modulation) {
 		case VSB_8:
 			dprintk("%s: VSB_8 MODE\n", __FUNCTION__);
 
-			/* Select VSB mode and serial MPEG interface */
-			top_ctrl_cfg[1] = 0x07;
+			/* Select VSB mode */
+			top_ctrl_cfg[1] = 0x03;
 
 			/* Select ANT connector if supported by card */
 			if (state->config->pll_rf_set)
 				state->config->pll_rf_set(fe, 1);
+
+			if (state->config->demod_chip == LGDT3303) {
+				err = i2c_write_demod_bytes(state, lgdt3303_8vsb_44_data,
+											sizeof(lgdt3303_8vsb_44_data));
+			}
 			break;
 
 		case QAM_64:
 			dprintk("%s: QAM_64 MODE\n", __FUNCTION__);
 
-			/* Select QAM_64 mode and serial MPEG interface */
-			top_ctrl_cfg[1] = 0x04;
+			/* Select QAM_64 mode */
+			top_ctrl_cfg[1] = 0x00;
 
 			/* Select CABLE connector if supported by card */
 			if (state->config->pll_rf_set)
 				state->config->pll_rf_set(fe, 0);
+
+			if (state->config->demod_chip == LGDT3303) {
+				err = i2c_write_demod_bytes(state, lgdt3303_qam_data,
+											sizeof(lgdt3303_qam_data));
+			}
 			break;
 
 		case QAM_256:
 			dprintk("%s: QAM_256 MODE\n", __FUNCTION__);
 
-			/* Select QAM_256 mode and serial MPEG interface */
-			top_ctrl_cfg[1] = 0x05;
+			/* Select QAM_256 mode */
+			top_ctrl_cfg[1] = 0x01;
 
 			/* Select CABLE connector if supported by card */
 			if (state->config->pll_rf_set)
 				state->config->pll_rf_set(fe, 0);
+
+			if (state->config->demod_chip == LGDT3303) {
+				err = i2c_write_demod_bytes(state, lgdt3303_qam_data,
+											sizeof(lgdt3303_qam_data));
+			}
 			break;
 		default:
 			printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) UNSUPPORTED\n", __FUNCTION__, param->u.vsb.modulation);
 			return -1;
 		}
-		/* Initializations common to all modes */
+		/*
+		 * select serial or parallel MPEG harware interface
+		 * Serial:   0x04 for LGDT3302 or 0x40 for LGDT3303
+		 * Parallel: 0x00
+		 */
+		top_ctrl_cfg[1] |= state->config->serial_mpeg;
 
 		/* Select the requested mode */
-		i2c_writebytes(state, state->config->demod_address,
-			       top_ctrl_cfg, sizeof(top_ctrl_cfg));
-
-		/* Change the value of IFBW[11:0]
-		   of AGC IF/RF loop filter bandwidth register */
-		i2c_writebytes(state, state->config->demod_address,
-			       agc_rf_cfg, sizeof(agc_rf_cfg));
-
-		/* Change the value of bit 6, 'nINAGCBY' and
-		   'NSSEL[1:0] of ACG function control register 2 */
-		/* Change the value of bit 6 'RFFIX'
-		   of AGC function control register 3 */
-		i2c_writebytes(state, state->config->demod_address,
-			       agc_ctrl_cfg, sizeof(agc_ctrl_cfg));
-
-		/* Change the TPCLK pin polarity
-		   data is valid on falling clock */
-		i2c_writebytes(state, state->config->demod_address,
-			       demux_ctrl_cfg, sizeof(demux_ctrl_cfg));
-
-		/* Change the value of NCOCTFV[25:0] of carrier
-		   recovery center frequency register */
-		i2c_writebytes(state, state->config->demod_address,
-				       vsb_freq_cfg, sizeof(vsb_freq_cfg));
-
-		/* Set the value of 'INLVTHD' register 0x2a/0x2c to 0x7fe */
-		i2c_writebytes(state, state->config->demod_address,
-			       agc_delay_cfg, sizeof(agc_delay_cfg));
-
-		/* Change the value of IAGCBW[15:8]
-		   of inner AGC loop filter bandwith */
-		i2c_writebytes(state, state->config->demod_address,
-			       agc_loop_cfg, sizeof(agc_loop_cfg));
-
+		i2c_write_demod_bytes(state, top_ctrl_cfg,
+							  sizeof(top_ctrl_cfg));
 		state->config->set_ts_params(fe, 0);
 		state->current_modulation = param->u.vsb.modulation;
 	}
 
 	/* Change only if we are actually changing the channel */
 	if (state->current_frequency != param->frequency) {
-		u8 buf[5];
-		struct i2c_msg msg = { .flags = 0, .buf = &buf[1], .len = 4 };
-		int err;
-
-		state->config->pll_set(fe, param, buf);
-		msg.addr = buf[0];
-
-		dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x "
-			"0x%02x 0x%02x\n", __FUNCTION__,
-			buf[0],buf[1],buf[2],buf[3],buf[4]);
-		if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
-			printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, buf[0], buf[1], err);
-			if (err < 0)
-				return err;
-			else
-				return -EREMOTEIO;
-		}
-#if 0
-		/* Check the status of the tuner pll */
-		i2c_readbytes(state, buf[0], &buf[1], 1);
-		dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[1]);
-#endif
-		/* Update current frequency */
+		/* Tune to the new frequency */
+		state->config->pll_set(fe, param);
+		/* Keep track of the new frequency */
 		state->current_frequency = param->frequency;
 	}
 	lgdt330x_SwReset(state);
@@ -328,21 +402,15 @@ static int lgdt330x_get_frontend(struct dvb_frontend* fe,
 	return 0;
 }
 
-static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status)
+static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
+	struct lgdt330x_state* state = fe->demodulator_priv;
 	u8 buf[3];
 
 	*status = 0; /* Reset status result */
 
-	/*
-	 * You must set the Mask bits to 1 in the IRQ_MASK in order
-	 * to see that status bit in the IRQ_STATUS register.
-	 * This is done in SwReset();
-	 */
-
 	/* AGC status register */
-	i2c_selectreadbytes(state, AGC_STATUS, buf, 1);
+	i2c_read_demod_bytes(state, AGC_STATUS, buf, 1);
 	dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]);
 	if ((buf[0] & 0x0c) == 0x8){
 		/* Test signal does not exist flag */
@@ -353,16 +421,15 @@ static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status)
 		return 0;
 	}
 
+	/*
+	 * You must set the Mask bits to 1 in the IRQ_MASK in order
+	 * to see that status bit in the IRQ_STATUS register.
+	 * This is done in SwReset();
+	 */
 	/* signal status */
-	i2c_selectreadbytes(state, TOP_CONTROL, buf, sizeof(buf));
+	i2c_read_demod_bytes(state, TOP_CONTROL, buf, sizeof(buf));
 	dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __FUNCTION__, buf[0], buf[1], buf[2]);
 
-#if 0
-	/* Alternative method to check for a signal */
-	/* using the SNR good/bad interrupts.   */
-	if ((buf[2] & 0x30) == 0x10)
-		*status |= FE_HAS_SIGNAL;
-#endif
 
 	/* sync status */
 	if ((buf[2] & 0x03) == 0x01) {
@@ -376,7 +443,7 @@ static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status)
 	}
 
 	/* Carrier Recovery Lock Status Register */
-	i2c_selectreadbytes(state, CARRIER_LOCK, buf, 1);
+	i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
 	dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]);
 	switch (state->current_modulation) {
 	case QAM_256:
@@ -396,13 +463,75 @@ static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status)
 	return 0;
 }
 
+static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status)
+{
+	struct lgdt330x_state* state = fe->demodulator_priv;
+	int err;
+	u8 buf[3];
+
+	*status = 0; /* Reset status result */
+
+	/* lgdt3303 AGC status register */
+	err = i2c_read_demod_bytes(state, 0x58, buf, 1);
+	if (err < 0)
+		return err;
+
+	dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]);
+	if ((buf[0] & 0x21) == 0x01){
+		/* Test input signal does not exist flag */
+		/* as well as the AGC lock flag.   */
+		*status |= FE_HAS_SIGNAL;
+	} else {
+		/* Without a signal all other status bits are meaningless */
+		return 0;
+	}
+
+	/* Carrier Recovery Lock Status Register */
+	i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
+	dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]);
+	switch (state->current_modulation) {
+	case QAM_256:
+	case QAM_64:
+		/* Need to undestand why there are 3 lock levels here */
+		if ((buf[0] & 0x07) == 0x07)
+			*status |= FE_HAS_CARRIER;
+		else
+			break;
+		i2c_read_demod_bytes(state, 0x8a, buf, 1);
+		if ((buf[0] & 0x04) == 0x04)
+			*status |= FE_HAS_SYNC;
+		if ((buf[0] & 0x01) == 0x01)
+			*status |= FE_HAS_LOCK;
+		if ((buf[0] & 0x08) == 0x08)
+			*status |= FE_HAS_VITERBI;
+		break;
+	case VSB_8:
+		if ((buf[0] & 0x80) == 0x80)
+			*status |= FE_HAS_CARRIER;
+		else
+			break;
+		i2c_read_demod_bytes(state, 0x38, buf, 1);
+		if ((buf[0] & 0x02) == 0x00)
+			*status |= FE_HAS_SYNC;
+		if ((buf[0] & 0x01) == 0x01) {
+			*status |= FE_HAS_LOCK;
+			*status |= FE_HAS_VITERBI;
+		}
+		break;
+	default:
+		printk("KERN_WARNING lgdt330x: %s: Modulation set to unsupported value\n", __FUNCTION__);
+	}
+	return 0;
+}
+
 static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
 	/* not directly available. */
+	*strength = 0;
 	return 0;
 }
 
-static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr)
+static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr)
 {
 #ifdef SNR_IN_DB
 	/*
@@ -451,7 +580,7 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr)
 		  91,    115,    144,    182,    229,    288, 362,   456,   574,   722,
 		  909,   1144,   1440,   1813,   2282,   2873, 3617,  4553,  5732,  7216,
 		  9084,  11436,  14396,  18124,  22817,  28724,  36161, 45524, 57312, 72151,
-		  90833, 114351, 143960, 181235, 228161, 0x040000
+		  90833, 114351, 143960, 181235, 228161, 0x080000
 		};
 
 	static u8 buf[5];/* read data buffer */
@@ -459,8 +588,8 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr)
 	static u32 snr_db;  /* index into SNR_EQ[] */
 	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
 
-	/* read both equalizer and pase tracker noise data */
-	i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf));
+	/* read both equalizer and phase tracker noise data */
+	i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf));
 
 	if (state->current_modulation == VSB_8) {
 		/* Equalizer Mean-Square Error Register for VSB */
@@ -496,19 +625,20 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr)
 	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
 
 	/* read both equalizer and pase tracker noise data */
-	i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf));
+	i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf));
 
 	if (state->current_modulation == VSB_8) {
-		/* Equalizer Mean-Square Error Register for VSB */
-		noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2];
-	} else {
-		/* Phase Tracker Mean-Square Error Register for QAM */
+		/* Phase Tracker Mean-Square Error Register for VSB */
 		noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
+	} else {
+
+		/* Carrier Recovery Mean-Square Error for QAM */
+		i2c_read_demod_bytes(state, 0x1a, buf, 2);
+		noise = ((buf[0] & 3) << 8) | buf[1];
 	}
 
 	/* Small values for noise mean signal is better so invert noise */
-	/* Noise is 19 bit value so discard 3 LSB*/
-	*snr = ~noise>>3;
+	*snr = ~noise;
 #endif
 
 	dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr);
@@ -516,6 +646,32 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr)
 	return 0;
 }
 
+static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+	/* Return the raw noise value */
+	static u8 buf[5];/* read data buffer */
+	static u32 noise;   /* noise value */
+	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
+
+	if (state->current_modulation == VSB_8) {
+
+		/* Phase Tracker Mean-Square Error Register for VSB */
+		noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4];
+	} else {
+
+		/* Carrier Recovery Mean-Square Error for QAM */
+		i2c_read_demod_bytes(state, 0x1a, buf, 2);
+		noise = (buf[0] << 8) | buf[1];
+	}
+
+	/* Small values for noise mean signal is better so invert noise */
+	*snr = ~noise;
+
+	dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr);
+
+	return 0;
+}
+
 static int lgdt330x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
 {
 	/* I have no idea about this - it may not be needed */
@@ -531,7 +687,8 @@ static void lgdt330x_release(struct dvb_frontend* fe)
 	kfree(state);
 }
 
-static struct dvb_frontend_ops lgdt330x_ops;
+static struct dvb_frontend_ops lgdt3302_ops;
+static struct dvb_frontend_ops lgdt3303_ops;
 
 struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
 				     struct i2c_adapter* i2c)
@@ -548,9 +705,19 @@ struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
 	/* Setup the state */
 	state->config = config;
 	state->i2c = i2c;
-	memcpy(&state->ops, &lgdt330x_ops, sizeof(struct dvb_frontend_ops));
+	switch (config->demod_chip) {
+	case LGDT3302:
+		memcpy(&state->ops, &lgdt3302_ops, sizeof(struct dvb_frontend_ops));
+		break;
+	case LGDT3303:
+		memcpy(&state->ops, &lgdt3303_ops, sizeof(struct dvb_frontend_ops));
+		break;
+	default:
+		goto error;
+	}
+
 	/* Verify communication with demod chip */
-	if (i2c_selectreadbytes(state, 2, buf, 1))
+	if (i2c_read_demod_bytes(state, 2, buf, 1))
 		goto error;
 
 	state->current_frequency = -1;
@@ -568,9 +735,33 @@ error:
 	return NULL;
 }
 
-static struct dvb_frontend_ops lgdt330x_ops = {
+static struct dvb_frontend_ops lgdt3302_ops = {
+	.info = {
+		.name= "LG Electronics LGDT3302 VSB/QAM Frontend",
+		.type = FE_ATSC,
+		.frequency_min= 54000000,
+		.frequency_max= 858000000,
+		.frequency_stepsize= 62500,
+		/* Symbol rate is for all VSB modes need to check QAM */
+		.symbol_rate_min    = 10762000,
+		.symbol_rate_max    = 10762000,
+		.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
+	},
+	.init                 = lgdt330x_init,
+	.set_frontend         = lgdt330x_set_parameters,
+	.get_frontend         = lgdt330x_get_frontend,
+	.get_tune_settings    = lgdt330x_get_tune_settings,
+	.read_status          = lgdt3302_read_status,
+	.read_ber             = lgdt330x_read_ber,
+	.read_signal_strength = lgdt330x_read_signal_strength,
+	.read_snr             = lgdt3302_read_snr,
+	.read_ucblocks        = lgdt330x_read_ucblocks,
+	.release              = lgdt330x_release,
+};
+
+static struct dvb_frontend_ops lgdt3303_ops = {
 	.info = {
-		.name= "LG Electronics lgdt330x VSB/QAM Frontend",
+		.name= "LG Electronics LGDT3303 VSB/QAM Frontend",
 		.type = FE_ATSC,
 		.frequency_min= 54000000,
 		.frequency_max= 858000000,
@@ -584,15 +775,15 @@ static struct dvb_frontend_ops lgdt330x_ops = {
 	.set_frontend         = lgdt330x_set_parameters,
 	.get_frontend         = lgdt330x_get_frontend,
 	.get_tune_settings    = lgdt330x_get_tune_settings,
-	.read_status          = lgdt330x_read_status,
+	.read_status          = lgdt3303_read_status,
 	.read_ber             = lgdt330x_read_ber,
 	.read_signal_strength = lgdt330x_read_signal_strength,
-	.read_snr             = lgdt330x_read_snr,
+	.read_snr             = lgdt3303_read_snr,
 	.read_ucblocks        = lgdt330x_read_ucblocks,
 	.release              = lgdt330x_release,
 };
 
-MODULE_DESCRIPTION("lgdt330x [DViCO FusionHDTV 3 Gold] (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
+MODULE_DESCRIPTION("LGDT330X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
 MODULE_AUTHOR("Wilson Michaels");
 MODULE_LICENSE("GPL");
 
@@ -601,6 +792,5 @@ EXPORT_SYMBOL(lgdt330x_attach);
 /*
  * Local variables:
  * c-basic-offset: 8
- * compile-command: "make DVB=1"
  * End:
  */
diff --git a/drivers/media/dvb/frontends/lgdt330x.h b/drivers/media/dvb/frontends/lgdt330x.h
index 04986f8..e209ba1 100644
--- a/drivers/media/dvb/frontends/lgdt330x.h
+++ b/drivers/media/dvb/frontends/lgdt330x.h
@@ -1,5 +1,5 @@
 /*
- *    Support for LGDT3302 & LGDT3303 (DViCO FustionHDTV Gold) - VSB/QAM
+ *    Support for LGDT3302 and LGDT3303 - VSB/QAM
  *
  *    Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
  *
@@ -24,14 +24,26 @@
 
 #include <linux/dvb/frontend.h>
 
+typedef enum lg_chip_t {
+		UNDEFINED,
+		LGDT3302,
+		LGDT3303
+}lg_chip_type;
+
 struct lgdt330x_config
 {
 	/* The demodulator's i2c address */
 	u8 demod_address;
 
+	/* LG demodulator chip LGDT3302 or LGDT3303 */
+	lg_chip_type demod_chip;
+
+	/* MPEG hardware interface - 0:parallel 1:serial */
+	int serial_mpeg;
+
 	/* PLL interface */
 	int (*pll_rf_set) (struct dvb_frontend* fe, int index);
-	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pll_address);
+	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
 
 	/* Need to set device param for start_dma */
 	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
diff --git a/drivers/media/dvb/frontends/lgdt330x_priv.h b/drivers/media/dvb/frontends/lgdt330x_priv.h
index 4143ce8..59b7c5b 100644
--- a/drivers/media/dvb/frontends/lgdt330x_priv.h
+++ b/drivers/media/dvb/frontends/lgdt330x_priv.h
@@ -1,5 +1,5 @@
 /*
- *    Support for LGDT3302 & LGDT3303 (DViCO FustionHDTV Gold) - VSB/QAM
+ *    Support for LGDT3302 and LGDT3303 - VSB/QAM
  *
  *    Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
  *
@@ -57,8 +57,10 @@ enum I2C_REG {
 	PH_ERR1= 0x4a,
 	PH_ERR2= 0x4b,
 	DEMUX_CONTROL= 0x66,
-	PACKET_ERR_COUNTER1= 0x6a,
-	PACKET_ERR_COUNTER2= 0x6b,
+	LGDT3302_PACKET_ERR_COUNTER1= 0x6a,
+	LGDT3302_PACKET_ERR_COUNTER2= 0x6b,
+	LGDT3303_PACKET_ERR_COUNTER1= 0x8b,
+	LGDT3303_PACKET_ERR_COUNTER2= 0x8c,
 };
 
 #endif /* _LGDT330X_PRIV_ */
diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c
index 6c52fd0..a97b9b9 100644
--- a/drivers/media/video/bttv-cards.c
+++ b/drivers/media/video/bttv-cards.c
@@ -95,7 +95,7 @@ static int __devinit pvr_boot(struct bttv *btv);
 static unsigned int triton1=0;
 static unsigned int vsfx=0;
 static unsigned int latency = UNSET;
-static unsigned int no_overlay=-1;
+int no_overlay=-1;
 
 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
@@ -4296,9 +4296,11 @@ void __devinit bttv_check_chipset(void)
 		printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
 	if (pcipci_fail) {
 		printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
-		if (UNSET == no_overlay) {
-			printk(KERN_WARNING "bttv: going to disable overlay.\n");
+		if (!no_overlay) {
+			printk(KERN_WARNING "bttv: overlay will be disabled.\n");
 			no_overlay = 1;
+		} else {
+			printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n");
 		}
 	}
 	if (UNSET != latency)
diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c
index 51a0f6d..eee9322 100644
--- a/drivers/media/video/bttv-driver.c
+++ b/drivers/media/video/bttv-driver.c
@@ -1,5 +1,5 @@
 /*
-    $Id: bttv-driver.c,v 1.42 2005/07/05 17:37:35 nsh Exp $
+    $Id: bttv-driver.c,v 1.52 2005/08/04 00:55:16 mchehab Exp $
 
     bttv - Bt848 frame grabber driver
 
@@ -80,6 +80,7 @@ static unsigned int irq_iswitch = 0;
 static unsigned int uv_ratio    = 50;
 static unsigned int full_luma_range = 0;
 static unsigned int coring      = 0;
+extern int no_overlay;
 
 /* API features (turn on/off stuff for testing) */
 static unsigned int v4l2        = 1;
@@ -2151,6 +2152,10 @@ static int bttv_s_fmt(struct bttv_fh *fh, struct bttv *btv,
 		return 0;
 	}
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+		if (no_overlay > 0) {
+			printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
+			return -EINVAL;
+		}
 		return setup_window(fh, btv, &f->fmt.win, 1);
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
 		retval = bttv_switch_type(fh,f->type);
@@ -2224,9 +2229,11 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
 			/* others */
 			cap->type = VID_TYPE_CAPTURE|
 				VID_TYPE_TUNER|
-				VID_TYPE_OVERLAY|
 				VID_TYPE_CLIPPING|
 				VID_TYPE_SCALES;
+			if (no_overlay <= 0)
+				cap->type |= VID_TYPE_OVERLAY;
+
 			cap->maxwidth  = bttv_tvnorms[btv->tvnorm].swidth;
 			cap->maxheight = bttv_tvnorms[btv->tvnorm].sheight;
 			cap->minwidth  = 48;
@@ -2302,6 +2309,11 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
 		struct video_window *win = arg;
 		struct v4l2_window w2;
 
+		if (no_overlay > 0) {
+			printk ("VIDIOCSWIN: no_overlay\n");
+			return -EINVAL;
+		}
+
 		w2.field = V4L2_FIELD_ANY;
 		w2.w.left    = win->x;
 		w2.w.top     = win->y;
@@ -2577,10 +2589,12 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
 		cap->version = BTTV_VERSION_CODE;
 		cap->capabilities =
 			V4L2_CAP_VIDEO_CAPTURE |
-			V4L2_CAP_VIDEO_OVERLAY |
 			V4L2_CAP_VBI_CAPTURE |
 			V4L2_CAP_READWRITE |
 			V4L2_CAP_STREAMING;
+		if (no_overlay <= 0)
+			cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY;
+
 		if (bttv_tvcards[btv->c.type].tuner != UNSET &&
 		    bttv_tvcards[btv->c.type].tuner != TUNER_ABSENT)
 			cap->capabilities |= V4L2_CAP_TUNER;
@@ -3076,7 +3090,7 @@ static struct file_operations bttv_fops =
 static struct video_device bttv_video_template =
 {
 	.name     = "UNSET",
-	.type     = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_OVERLAY|
+	.type     = VID_TYPE_CAPTURE|VID_TYPE_TUNER|
 	            VID_TYPE_CLIPPING|VID_TYPE_SCALES,
 	.hardware = VID_HARDWARE_BT848,
 	.fops     = &bttv_fops,
@@ -3756,6 +3770,12 @@ static void bttv_unregister_video(struct bttv *btv)
 /* register video4linux devices */
 static int __devinit bttv_register_video(struct bttv *btv)
 {
+	if (no_overlay <= 0) {
+		bttv_video_template.type |= VID_TYPE_OVERLAY;
+	} else {
+		printk("bttv: Overlay support disabled.\n");
+	}
+
 	/* video */
 	btv->video_dev = vdev_init(btv, &bttv_video_template, "video");
         if (NULL == btv->video_dev)
@@ -3869,11 +3889,6 @@ static int __devinit bttv_probe(struct pci_dev *dev,
         pci_set_master(dev);
 	pci_set_command(dev);
 	pci_set_drvdata(dev,btv);
-	if (!pci_dma_supported(dev,0xffffffff)) {
-		printk("bttv%d: Oops: no 32bit PCI DMA ???\n", btv->c.nr);
-		result = -EIO;
-		goto fail1;
-	}
 
         pci_read_config_byte(dev, PCI_CLASS_REVISION, &btv->revision);
         pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
diff --git a/drivers/media/video/bttv.h b/drivers/media/video/bttv.h
index 191eaf1..f2af9e1 100644
--- a/drivers/media/video/bttv.h
+++ b/drivers/media/video/bttv.h
@@ -1,5 +1,5 @@
 /*
- * $Id: bttv.h,v 1.18 2005/05/24 23:41:42 nsh Exp $
+ * $Id: bttv.h,v 1.22 2005/07/28 18:41:21 mchehab Exp $
  *
  *  bttv - Bt848 frame grabber driver
  *
@@ -135,7 +135,9 @@
 #define BTTV_DVICO_DVBT_LITE  0x80
 #define BTTV_TIBET_CS16  0x83
 #define BTTV_KODICOM_4400R  0x84
-#define BTTV_ADLINK_RTV24   0x85
+#define BTTV_ADLINK_RTV24   0x86
+#define BTTV_DVICO_FUSIONHDTV_5_LITE 0x87
+#define BTTV_ACORP_Y878F   0x88
 
 /* i2c address list */
 #define I2C_TSA5522        0xc2
diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h
index f3293e4..aab094b 100644
--- a/drivers/media/video/bttvp.h
+++ b/drivers/media/video/bttvp.h
@@ -1,5 +1,5 @@
 /*
-    $Id: bttvp.h,v 1.19 2005/06/16 21:38:45 nsh Exp $
+    $Id: bttvp.h,v 1.21 2005/07/15 21:44:14 mchehab Exp $
 
     bttv - Bt848 frame grabber driver
 
@@ -27,7 +27,7 @@
 #define _BTTVP_H_
 
 #include <linux/version.h>
-#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,15)
+#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,16)
 
 #include <linux/types.h>
 #include <linux/wait.h>
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 3d0c784..ebf02a7 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-cards.c,v 1.86 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: cx88-cards.c,v 1.90 2005/07/28 02:47:42 mkrufky Exp $
  *
  * device driver for Conexant 2388x based TV cards
  * card-specific stuff.
@@ -90,6 +90,9 @@ struct cx88_board cx88_boards[] = {
 		.input          = {{
 			.type   = CX88_VMUX_TELEVISION,
 			.vmux   = 0,
+		},{
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
 		}},
 	},
 	[CX88_BOARD_PIXELVIEW] = {
@@ -496,6 +499,9 @@ struct cx88_board cx88_boards[] = {
 		.input          = {{
                         .type   = CX88_VMUX_DVB,
                         .vmux   = 0,
+		},{
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
                 }},
 		.dvb            = 1,
 	},
@@ -753,6 +759,27 @@ struct cx88_board cx88_boards[] = {
 		}},
 		.dvb            = 1,
 	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD] = {
+		.name           = "DViCO FusionHDTV 5 Gold",
+		.tuner_type     = TUNER_LG_TDVS_H062F,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		/*  See DViCO FusionHDTV 3 Gold-Q for GPIO documentation.  */
+		.input          = {{
+                        .type   = CX88_VMUX_TELEVISION,
+                        .vmux   = 0,
+                        .gpio0  = 0x0f0d,
+                },{
+                        .type   = CX88_VMUX_COMPOSITE1,
+                        .vmux   = 1,
+                        .gpio0  = 0x0f00,
+                },{
+                        .type   = CX88_VMUX_SVIDEO,
+                        .vmux   = 2,
+                        .gpio0  = 0x0f00,
+                }},
+	},
 };
 const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
 
@@ -880,6 +907,10 @@ struct cx88_subid cx88_subids[] = {
 		.subvendor = 0x153b,
 		.subdevice = 0x1166,
 		.card      = CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1,
+ 	},{
+		.subvendor = 0x18ac,
+		.subdevice = 0xd500,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD,
 	},
 };
 const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index ef0e9a8..78d2232 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-dvb.c,v 1.54 2005/07/25 05:13:50 mkrufky Exp $
+ * $Id: cx88-dvb.c,v 1.58 2005/08/07 09:24:08 mkrufky Exp $
  *
  * device driver for Conexant 2388x based TV cards
  * MPEG Transport Stream (DVB) routines
@@ -208,14 +208,26 @@ static struct or51132_config pchdtv_hd3000 = {
 
 #ifdef HAVE_LGDT330X
 static int lgdt330x_pll_set(struct dvb_frontend* fe,
-			    struct dvb_frontend_parameters* params,
-			    u8* pllbuf)
+			    struct dvb_frontend_parameters* params)
 {
 	struct cx8802_dev *dev= fe->dvb->priv;
+	u8 buf[4];
+	struct i2c_msg msg =
+		{ .addr = dev->core->pll_addr, .flags = 0, .buf = buf, .len = 4 };
+	int err;
 
-	pllbuf[0] = dev->core->pll_addr;
-	dvb_pll_configure(dev->core->pll_desc, &pllbuf[1],
-			  params->frequency, 0);
+	dvb_pll_configure(dev->core->pll_desc, buf, params->frequency, 0);
+	dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
+			__FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
+	if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
+		printk(KERN_WARNING "cx88-dvb: %s error "
+			   "(addr %02x <- %02x, err = %i)\n",
+			   __FUNCTION__, buf[0], buf[1], err);
+		if (err < 0)
+			return err;
+		else
+			return -EREMOTEIO;
+	}
 	return 0;
 }
 
@@ -244,6 +256,8 @@ static int lgdt330x_set_ts_param(struct dvb_frontend* fe, int is_punctured)
 
 static struct lgdt330x_config fusionhdtv_3_gold = {
 	.demod_address    = 0x0e,
+	.demod_chip       = LGDT3302,
+	.serial_mpeg      = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */
 	.pll_set          = lgdt330x_pll_set,
 	.set_ts_params    = lgdt330x_set_ts_param,
 };
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 5588a3a..5f58c10 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-video.c,v 1.80 2005/07/13 08:49:08 mchehab Exp $
+ * $Id: cx88-video.c,v 1.82 2005/07/22 05:13:34 mkrufky Exp $
  *
  * device driver for Conexant 2388x based TV cards
  * video4linux video interface
@@ -758,10 +758,10 @@ static int video_open(struct inode *inode, struct file *file)
 		struct cx88_core *core = dev->core;
 		int board = core->board;
 		dprintk(1,"video_open: setting radio device\n");
+		cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3);
 		cx_write(MO_GP0_IO, cx88_boards[board].radio.gpio0);
 		cx_write(MO_GP1_IO, cx88_boards[board].radio.gpio1);
 		cx_write(MO_GP2_IO, cx88_boards[board].radio.gpio2);
-		cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3);
 		dev->core->tvaudio = WW_FM;
 		cx88_set_tvaudio(core);
 		cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1);
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index b008f7d..da65dc9 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88.h,v 1.69 2005/07/13 17:25:25 mchehab Exp $
+ * $Id: cx88.h,v 1.70 2005/07/24 17:44:09 mkrufky Exp $
  *
  * v4l2 device driver for cx2388x based TV cards
  *
@@ -171,6 +171,7 @@ extern struct sram_channel cx88_sram_channels[];
 #define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T  28
 #define CX88_BOARD_ADSTECH_DVB_T_PCI          29
 #define CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1  30
+#define CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD 31
 
 enum cx88_itype {
 	CX88_VMUX_COMPOSITE1 = 1,
diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c
index 6239254..62f1b8d 100644
--- a/drivers/media/video/msp3400.c
+++ b/drivers/media/video/msp3400.c
@@ -741,11 +741,9 @@ static int msp34xx_sleep(struct msp3400c *msp, int timeout)
 			schedule_timeout(msecs_to_jiffies(timeout));
 		}
 	}
-	if (current->flags & PF_FREEZE) {
-		refrigerator ();
-	}
 
 	remove_wait_queue(&msp->wq, &wait);
+	try_to_freeze();
 	return msp->restart;
 }
 
diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c
index 93dd619..1203b93 100644
--- a/drivers/media/video/saa7134/saa7134-i2c.c
+++ b/drivers/media/video/saa7134/saa7134-i2c.c
@@ -1,5 +1,5 @@
 /*
- * $Id: saa7134-i2c.c,v 1.19 2005/07/07 01:49:30 mkrufky Exp $
+ * $Id: saa7134-i2c.c,v 1.22 2005/07/22 04:09:41 mkrufky Exp $
  *
  * device driver for philips saa7134 based TV cards
  * i2c interface support
@@ -300,6 +300,8 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
   	status = i2c_get_status(dev);
 	if (i2c_is_error(status))
 		goto err;
+	/* ensure that the bus is idle for at least one bit slot */
+	msleep(1);
 
 	d1printk("\n");
 	return num;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 6836c07..2af0cb2 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -1,5 +1,5 @@
 /*
- * $Id: saa7134.h,v 1.48 2005/07/01 08:22:24 nsh Exp $
+ * $Id: saa7134.h,v 1.49 2005/07/13 17:25:25 mchehab Exp $
  *
  * v4l2 device driver for philips saa7134 based TV cards
  *
@@ -21,7 +21,7 @@
  */
 
 #include <linux/version.h>
-#define SAA7134_VERSION_CODE KERNEL_VERSION(0,2,13)
+#define SAA7134_VERSION_CODE KERNEL_VERSION(0,2,14)
 
 #include <linux/pci.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/tea5767.c b/drivers/media/video/tea5767.c
index 4d27ac1..cebcc1f 100644
--- a/drivers/media/video/tea5767.c
+++ b/drivers/media/video/tea5767.c
@@ -2,7 +2,7 @@
  * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
  * I2C address is allways 0xC0.
  *
- * $Id: tea5767.c,v 1.21 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: tea5767.c,v 1.27 2005/07/31 12:10:56 mchehab Exp $
  *
  * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br)
  * This code is placed under the terms of the GNU General Public License
@@ -15,7 +15,6 @@
 #include <linux/videodev.h>
 #include <linux/delay.h>
 #include <media/tuner.h>
-#include <media/tuner.h>
 
 #define PREFIX "TEA5767 "
 
@@ -293,16 +292,16 @@ static int tea5767_stereo(struct i2c_client *c)
 
 int tea5767_autodetection(struct i2c_client *c)
 {
-	unsigned char buffer[5] = { 0xff, 0xff, 0xff, 0xff, 0xff };
+	unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 	int rc;
 	struct tuner *t = i2c_get_clientdata(c);
 
-	if (5 != (rc = i2c_master_recv(c, buffer, 5))) {
+	if (7 != (rc = i2c_master_recv(c, buffer, 7))) {
 		tuner_warn("It is not a TEA5767. Received %i bytes.\n", rc);
 		return EINVAL;
 	}
 
-	/* If all bytes are the same then it's a TV tuner and not a tea5767 chip. */
+	/* If all bytes are the same then it's a TV tuner and not a tea5767 */
 	if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
 	    buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
 		tuner_warn("All bytes are equal. It is not a TEA5767\n");
@@ -318,6 +317,17 @@ int tea5767_autodetection(struct i2c_client *c)
 		tuner_warn("Chip ID is not zero. It is not a TEA5767\n");
 		return EINVAL;
 	}
+	/* It seems that tea5767 returns 0xff after the 5th byte */
+	if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
+		tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n");
+		return EINVAL;
+	}
+
+	/* It seems that tea5767 returns 0xff after the 5th byte */
+	if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
+		tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n");
+		return EINVAL;
+	}
 
 	tuner_warn("TEA5767 detected.\n");
 	return 0;
@@ -327,10 +337,8 @@ int tea5767_tuner_init(struct i2c_client *c)
 {
 	struct tuner *t = i2c_get_clientdata(c);
 
-	if (tea5767_autodetection(c) == EINVAL)
-		return EINVAL;
-
-	tuner_info("type set to %d (%s)\n", t->type, "Philips TEA5767HN FM Radio");
+	tuner_info("type set to %d (%s)\n", t->type,
+			"Philips TEA5767HN FM Radio");
 	strlcpy(c->name, "tea5767", sizeof(c->name));
 
 	t->tv_freq = set_tv_freq;
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index b25a9c0..f0a5798 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1,5 +1,5 @@
 /*
- * $Id: tuner-core.c,v 1.58 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: tuner-core.c,v 1.63 2005/07/28 18:19:55 mchehab Exp $
  *
  * i2c tv tuner chip device driver
  * core core, i.e. kernel interfaces, registering and so on
@@ -23,6 +23,8 @@
 #include <media/tuner.h>
 #include <media/audiochip.h>
 
+#include "msp3400.h"
+
 #define UNSET (-1U)
 
 /* standard i2c insmod options */
@@ -42,6 +44,9 @@ module_param(addr, int, 0444);
 static unsigned int no_autodetect = 0;
 module_param(no_autodetect, int, 0444);
 
+static unsigned int show_i2c = 0;
+module_param(show_i2c, int, 0444);
+
 /* insmod options used at runtime => read/write */
 unsigned int tuner_debug = 0;
 module_param(tuner_debug, int, 0644);
@@ -320,6 +325,17 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
 
 	tuner_info("chip found @ 0x%x (%s)\n", addr << 1, adap->name);
 
+	if (show_i2c) {
+		unsigned char buffer[16];
+		int i,rc;
+
+		memset(buffer, 0, sizeof(buffer));
+		rc = i2c_master_recv(&t->i2c, buffer, sizeof(buffer));
+		printk("tuner-%04x I2C RECV = ",addr);
+		for (i=0;i<rc;i++)
+			printk("%02x ",buffer[i]);
+		printk("\n");
+	}
 	/* TEA5767 autodetection code - only for addr = 0xc0 */
 	if (!no_autodetect) {
 		if (addr == 0x60) {
@@ -451,6 +467,17 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 			break;
 		}
 		break;
+	case VIDIOCSAUDIO:
+		if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
+			return 0;
+		if (check_v4l2(t) == EINVAL)
+			return 0;
+
+		/* Should be implemented, since bttv calls it */
+		tuner_dbg("VIDIOCSAUDIO not implemented.\n");
+
+		break;
+	case MSP_SET_MATRIX:
 	case TDA9887_SET_CONFIG:
 		break;
 	/* --- v4l ioctls --- */
diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index a3f8e83..de0c93a 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -1,5 +1,5 @@
 /*
- * $Id: tuner-simple.c,v 1.39 2005/07/07 01:49:30 mkrufky Exp $
+ * $Id: tuner-simple.c,v 1.43 2005/07/28 18:41:21 mchehab Exp $
  *
  * i2c tv tuner chip device driver
  * controls all those simple 4-control-bytes style tuners.
@@ -245,6 +245,12 @@ static struct tunertype tuners[] = {
           /* see tea5767.c for details */},
 	{ "Philips FMD1216ME MK3 Hybrid Tuner", Philips, PAL,
 	  16*160.00,16*442.00,0x51,0x52,0x54,0x86,623 },
+
+	{ "LG TDVS-H062F/TUA6034", LGINNOTEK, NTSC,
+	  16*160.00,16*455.00,0x01,0x02,0x04,0x8e,732},
+
+	{ "Ymec TVF66T5-B/DFF", Philips, PAL,
+          16*160.25,16*464.25,0x01,0x02,0x08,0x8e,623},
 };
 
 unsigned const int tuner_count = ARRAY_SIZE(tuners);
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 62b03ef..127ec38 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -189,7 +189,7 @@ hauppauge_tuner[] =
 	{ TUNER_ABSENT,        "Philips FQ1236 MK3"},
 	{ TUNER_ABSENT,        "Samsung TCPN 2121P30A"},
 	{ TUNER_ABSENT,        "Samsung TCPE 4121P30A"},
-	{ TUNER_ABSENT,        "TCL MFPE05 2"},
+	{ TUNER_PHILIPS_FM1216ME_MK3, "TCL MFPE05 2"},
 	/* 90-99 */
 	{ TUNER_ABSENT,        "LG TALN H202T"},
 	{ TUNER_PHILIPS_FQ1216AME_MK4, "Philips FQ1216AME MK4"},
diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig
index 06e8eb1..43a942a 100644
--- a/drivers/message/i2o/Kconfig
+++ b/drivers/message/i2o/Kconfig
@@ -53,6 +53,9 @@ config I2O_CONFIG
 	  To compile this support as a module, choose M here: the
 	  module will be called i2o_config.
 
+	  Note: If you want to use the new API you have to download the
+	  i2o_config patch from http://i2o.shadowconnect.com/
+
 config I2O_CONFIG_OLD_IOCTL
 	bool "Enable ioctls (OBSOLETE)"
 	depends on I2O_CONFIG
diff --git a/drivers/message/i2o/config-osm.c b/drivers/message/i2o/config-osm.c
index fe2e7af..af32ab4 100644
--- a/drivers/message/i2o/config-osm.c
+++ b/drivers/message/i2o/config-osm.c
@@ -30,503 +30,9 @@
 
 static struct i2o_driver i2o_config_driver;
 
-/* Special file operations for sysfs */
-struct fops_attribute {
-	struct bin_attribute bin;
-	struct file_operations fops;
-};
-
-/**
- *	sysfs_read_dummy
- */
-static ssize_t sysfs_read_dummy(struct kobject *kobj, char *buf, loff_t offset,
-				size_t count)
-{
-	return 0;
-};
-
-/**
- *	sysfs_write_dummy
- */
-static ssize_t sysfs_write_dummy(struct kobject *kobj, char *buf, loff_t offset,
-				 size_t count)
-{
-	return 0;
-};
-
-/**
- *	sysfs_create_fops_file - Creates attribute with special file operations
- *	@kobj: kobject which should contains the attribute
- *	@attr: attributes which should be used to create file
- *
- *	First creates attribute @attr in kobject @kobj. If it is the first time
- *	this function is called, merge old fops from sysfs with new one and
- *	write it back. Afterwords the new fops will be set for the created
- *	attribute.
- *
- *	Returns 0 on success or negative error code on failure.
- */
-static int sysfs_create_fops_file(struct kobject *kobj,
-				  struct fops_attribute *attr)
-{
-	struct file_operations tmp, *fops;
-	struct dentry *d;
-	struct qstr qstr;
-	int rc;
-
-	fops = &attr->fops;
-
-	if (fops->read)
-		attr->bin.read = sysfs_read_dummy;
-
-	if (fops->write)
-		attr->bin.write = sysfs_write_dummy;
-
-	if ((rc = sysfs_create_bin_file(kobj, &attr->bin)))
-		return rc;
-
-	qstr.name = attr->bin.attr.name;
-	qstr.len = strlen(qstr.name);
-	qstr.hash = full_name_hash(qstr.name, qstr.len);
-
-	if ((d = lookup_hash(&qstr, kobj->dentry))) {
-		if (!fops->owner) {
-			memcpy(&tmp, d->d_inode->i_fop, sizeof(tmp));
-			if (fops->read)
-				tmp.read = fops->read;
-			if (fops->write)
-				tmp.write = fops->write;
-			memcpy(fops, &tmp, sizeof(tmp));
-		}
-
-		d->d_inode->i_fop = fops;
-	} else
-		sysfs_remove_bin_file(kobj, &attr->bin);
-
-	return -ENOENT;
-};
-
-/**
- *	sysfs_remove_fops_file - Remove attribute with special file operations
- *	@kobj: kobject which contains the attribute
- *	@attr: attributes which are used to create file
- *
- *	Only wrapper arround sysfs_remove_bin_file()
- *
- *	Returns 0 on success or negative error code on failure.
- */
-static inline int sysfs_remove_fops_file(struct kobject *kobj,
-					 struct fops_attribute *attr)
-{
-	return sysfs_remove_bin_file(kobj, &attr->bin);
-};
-
-/**
- *	i2o_config_read_hrt - Returns the HRT of the controller
- *	@kob: kernel object handle
- *	@buf: buffer into which the HRT should be copied
- *	@off: file offset
- *	@count: number of bytes to read
- *
- *	Put @count bytes starting at @off into @buf from the HRT of the I2O
- *	controller corresponding to @kobj.
- *
- *	Returns number of bytes copied into buffer.
- */
-static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf,
-				   loff_t offset, size_t count)
-{
-	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
-	i2o_hrt *hrt = c->hrt.virt;
-
-	u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4;
-
-	if (offset > size)
-		return 0;
-
-	if (offset + count > size)
-		count = size - offset;
-
-	memcpy(buf, (u8 *) hrt + offset, count);
-
-	return count;
-};
-
-/**
- *	i2o_config_read_lct - Returns the LCT of the controller
- *	@kob: kernel object handle
- *	@buf: buffer into which the LCT should be copied
- *	@off: file offset
- *	@count: number of bytes to read
- *
- *	Put @count bytes starting at @off into @buf from the LCT of the I2O
- *	controller corresponding to @kobj.
- *
- *	Returns number of bytes copied into buffer.
- */
-static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf,
-				   loff_t offset, size_t count)
-{
-	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
-	u32 size = c->lct->table_size * 4;
-
-	if (offset > size)
-		return 0;
-
-	if (offset + count > size)
-		count = size - offset;
-
-	memcpy(buf, (u8 *) c->lct + offset, count);
-
-	return count;
-};
-
-#define I2O_CONFIG_SW_ATTR(_name,_mode,_type,_swid) \
-static ssize_t i2o_config_##_name##_read(struct file *file, char __user *buf, size_t count, loff_t * offset) { \
-	return i2o_config_sw_read(file, buf, count, offset, _type, _swid); \
-};\
-\
-static ssize_t i2o_config_##_name##_write(struct file *file, const char __user *buf, size_t count, loff_t * offset) { \
-	return i2o_config_sw_write(file, buf, count, offset, _type, _swid); \
-}; \
-\
-static struct fops_attribute i2o_config_attr_##_name = { \
-	.bin = { .attr = { .name = __stringify(_name), .mode = _mode, \
-			   .owner = THIS_MODULE }, \
-		 .size = 0, }, \
-	.fops = { .write = i2o_config_##_name##_write, \
-		  .read = i2o_config_##_name##_read} \
-};
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-
-/**
- *	i2o_config_dpt_reagion - Converts type and id to flash region
- *	@swtype: type of software module reading
- *	@swid: id of software which should be read
- *
- *	Converts type and id from I2O spec to the matching region for DPT /
- *	Adaptec controllers.
- *
- *	Returns region which match type and id or -1 on error.
- */
-static u32 i2o_config_dpt_region(u8 swtype, u8 swid)
-{
-	switch (swtype) {
-	case I2O_SOFTWARE_MODULE_IRTOS:
-		/*
-		 * content: operation firmware
-		 * region size:
-		 *      0xbc000 for 2554, 3754, 2564, 3757
-		 *      0x170000 for 2865
-		 *      0x17c000 for 3966
-		 */
-		if (!swid)
-			return 0;
-
-		break;
-
-	case I2O_SOFTWARE_MODULE_IOP_PRIVATE:
-		/*
-		 * content: BIOS and SMOR
-		 * BIOS size: first 0x8000 bytes
-		 * region size:
-		 *      0x40000 for 2554, 3754, 2564, 3757
-		 *      0x80000 for 2865, 3966
-		 */
-		if (!swid)
-			return 1;
-
-		break;
-
-	case I2O_SOFTWARE_MODULE_IOP_CONFIG:
-		switch (swid) {
-		case 0:
-			/*
-			 * content: NVRAM defaults
-			 * region size: 0x2000 bytes
-			 */
-			return 2;
-		case 1:
-			/*
-			 * content: serial number
-			 * region size: 0x2000 bytes
-			 */
-			return 3;
-		}
-		break;
-	}
-
-	return -1;
-};
-
-#endif
-
-/**
- *	i2o_config_sw_read - Read a software module from controller
- *	@file: file pointer
- *	@buf: buffer into which the data should be copied
- *	@count: number of bytes to read
- *	@off: file offset
- *	@swtype: type of software module reading
- *	@swid: id of software which should be read
- *
- *	Transfers @count bytes at offset @offset from IOP into buffer using
- *	type @swtype and id @swid as described in I2O spec.
- *
- *	Returns number of bytes copied into buffer or error code on failure.
- */
-static ssize_t i2o_config_sw_read(struct file *file, char __user * buf,
-				  size_t count, loff_t * offset, u8 swtype,
-				  u32 swid)
-{
-	struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
-	struct kobject *kobj = sd->s_element;
-	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
-	u32 m, function = I2O_CMD_SW_UPLOAD;
-	struct i2o_dma buffer;
-	struct i2o_message __iomem *msg;
-	u32 __iomem *mptr;
-	int rc, status;
-
-	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
-	if (m == I2O_QUEUE_EMPTY)
-		return -EBUSY;
-
-	mptr = &msg->body[3];
-
-	if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) {
-		i2o_msg_nop(c, m);
-		return rc;
-	}
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (c->adaptec) {
-		mptr = &msg->body[4];
-		function = I2O_CMD_PRIVATE;
-
-		writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
-
-		writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_READ,
-		       &msg->body[0]);
-		writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
-		writel(*offset, &msg->body[2]);
-		writel(count, &msg->body[3]);
-	} else
-#endif
-		writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
-
-	writel(0xD0000000 | count, mptr++);
-	writel(buffer.phys, mptr);
-
-	writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
-	writel(i2o_config_driver.context, &msg->u.head[2]);
-	writel(0, &msg->u.head[3]);
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (!c->adaptec)
-#endif
-	{
-		writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
-		writel(0, &msg->body[1]);
-		writel(swid, &msg->body[2]);
-	}
-
-	status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
-
-	if (status == I2O_POST_WAIT_OK) {
-		if (!(rc = copy_to_user(buf, buffer.virt, count))) {
-			rc = count;
-			*offset += count;
-		}
-	} else
-		rc = -EIO;
-
-	if (status != -ETIMEDOUT)
-		i2o_dma_free(&c->pdev->dev, &buffer);
-
-	return rc;
-};
-
-/**
- *	i2o_config_sw_write - Write a software module to controller
- *	@file: file pointer
- *	@buf: buffer into which the data should be copied
- *	@count: number of bytes to read
- *	@off: file offset
- *	@swtype: type of software module writing
- *	@swid: id of software which should be written
- *
- *	Transfers @count bytes at offset @offset from buffer to IOP using
- *	type @swtype and id @swid as described in I2O spec.
- *
- *	Returns number of bytes copied from buffer or error code on failure.
- */
-static ssize_t i2o_config_sw_write(struct file *file, const char __user * buf,
-				   size_t count, loff_t * offset, u8 swtype,
-				   u32 swid)
-{
-	struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
-	struct kobject *kobj = sd->s_element;
-	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
-	u32 m, function = I2O_CMD_SW_DOWNLOAD;
-	struct i2o_dma buffer;
-	struct i2o_message __iomem *msg;
-	u32 __iomem *mptr;
-	int rc, status;
-
-	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
-	if (m == I2O_QUEUE_EMPTY)
-		return -EBUSY;
-
-	mptr = &msg->body[3];
-
-	if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL)))
-		goto nop_msg;
-
-	if ((rc = copy_from_user(buffer.virt, buf, count)))
-		goto free_buffer;
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (c->adaptec) {
-		mptr = &msg->body[4];
-		function = I2O_CMD_PRIVATE;
-
-		writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
-
-		writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_WRITE,
-		       &msg->body[0]);
-		writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
-		writel(*offset, &msg->body[2]);
-		writel(count, &msg->body[3]);
-	} else
-#endif
-		writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
-
-	writel(0xD4000000 | count, mptr++);
-	writel(buffer.phys, mptr);
-
-	writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
-	writel(i2o_config_driver.context, &msg->u.head[2]);
-	writel(0, &msg->u.head[3]);
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (!c->adaptec)
-#endif
-	{
-		writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
-		writel(0, &msg->body[1]);
-		writel(swid, &msg->body[2]);
-	}
-
-	status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
-
-	if (status != -ETIMEDOUT)
-		i2o_dma_free(&c->pdev->dev, &buffer);
-
-	if (status != I2O_POST_WAIT_OK)
-		return -EIO;
-
-	*offset += count;
-
-	return count;
-
-      free_buffer:
-	i2o_dma_free(&c->pdev->dev, &buffer);
-
-      nop_msg:
-	i2o_msg_nop(c, m);
-
-	return rc;
-};
-
-/* attribute for HRT in sysfs */
-static struct bin_attribute i2o_config_hrt_attr = {
-	.attr = {
-		 .name = "hrt",
-		 .mode = S_IRUGO,
-		 .owner = THIS_MODULE},
-	.size = 0,
-	.read = i2o_config_read_hrt
-};
-
-/* attribute for LCT in sysfs */
-static struct bin_attribute i2o_config_lct_attr = {
-	.attr = {
-		 .name = "lct",
-		 .mode = S_IRUGO,
-		 .owner = THIS_MODULE},
-	.size = 0,
-	.read = i2o_config_read_lct
-};
-
-/* IRTOS firmware access */
-I2O_CONFIG_SW_ATTR(irtos, S_IWRSR, I2O_SOFTWARE_MODULE_IRTOS, 0);
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-
-/*
- * attribute for BIOS / SMOR, nvram and serial number access on DPT / Adaptec
- * controllers
- */
-I2O_CONFIG_SW_ATTR(bios, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_PRIVATE, 0);
-I2O_CONFIG_SW_ATTR(nvram, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 0);
-I2O_CONFIG_SW_ATTR(serial, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 1);
-
-#endif
-
-/**
- *	i2o_config_notify_controller_add - Notify of added controller
- *	@c: the controller which was added
- *
- *	If a I2O controller is added, we catch the notification to add sysfs
- *	entries.
- */
-static void i2o_config_notify_controller_add(struct i2o_controller *c)
-{
-	struct kobject *kobj = &c->exec->device.kobj;
-
-	sysfs_create_bin_file(kobj, &i2o_config_hrt_attr);
-	sysfs_create_bin_file(kobj, &i2o_config_lct_attr);
-
-	sysfs_create_fops_file(kobj, &i2o_config_attr_irtos);
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (c->adaptec) {
-		sysfs_create_fops_file(kobj, &i2o_config_attr_bios);
-		sysfs_create_fops_file(kobj, &i2o_config_attr_nvram);
-		sysfs_create_fops_file(kobj, &i2o_config_attr_serial);
-	}
-#endif
-};
-
-/**
- *	i2o_config_notify_controller_remove - Notify of removed controller
- *	@c: the controller which was removed
- *
- *	If a I2O controller is removed, we catch the notification to remove the
- *	sysfs entries.
- */
-static void i2o_config_notify_controller_remove(struct i2o_controller *c)
-{
-	struct kobject *kobj = &c->exec->device.kobj;
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (c->adaptec) {
-		sysfs_remove_fops_file(kobj, &i2o_config_attr_serial);
-		sysfs_remove_fops_file(kobj, &i2o_config_attr_nvram);
-		sysfs_remove_fops_file(kobj, &i2o_config_attr_bios);
-	}
-#endif
-	sysfs_remove_fops_file(kobj, &i2o_config_attr_irtos);
-
-	sysfs_remove_bin_file(kobj, &i2o_config_lct_attr);
-	sysfs_remove_bin_file(kobj, &i2o_config_hrt_attr);
-};
-
 /* Config OSM driver struct */
 static struct i2o_driver i2o_config_driver = {
 	.name = OSM_NAME,
-	.notify_controller_add = i2o_config_notify_controller_add,
-	.notify_controller_remove = i2o_config_notify_controller_remove
 };
 
 #ifdef CONFIG_I2O_CONFIG_OLD_IOCTL
diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c
index 7a60fd7..66c03e8 100644
--- a/drivers/message/i2o/pci.c
+++ b/drivers/message/i2o/pci.c
@@ -32,6 +32,8 @@
 #include <linux/i2o.h>
 #include "core.h"
 
+#define OSM_DESCRIPTION	"I2O-subsystem"
+
 /* PCI device id table for all I2O controllers */
 static struct pci_device_id __devinitdata i2o_pci_ids[] = {
 	{PCI_DEVICE_CLASS(PCI_CLASS_INTELLIGENT_I2O << 8, 0xffff00)},
@@ -66,6 +68,8 @@ static void i2o_pci_free(struct i2o_controller *c)
 
 	if (c->base.virt)
 		iounmap(c->base.virt);
+
+	pci_release_regions(c->pdev);
 }
 
 /**
@@ -84,6 +88,11 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
 	struct device *dev = &pdev->dev;
 	int i;
 
+	if (pci_request_regions(pdev, OSM_DESCRIPTION)) {
+		printk(KERN_ERR "%s: device already claimed\n", c->name);
+		return -ENODEV;
+	}
+
 	for (i = 0; i < 6; i++) {
 		/* Skip I/O spaces */
 		if (!(pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
@@ -138,6 +147,7 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
 	c->base.virt = ioremap_nocache(c->base.phys, c->base.len);
 	if (!c->base.virt) {
 		printk(KERN_ERR "%s: Unable to map controller.\n", c->name);
+		i2o_pci_free(c);
 		return -ENOMEM;
 	}
 
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 8b487ed..974f2f3 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -42,7 +42,7 @@
 #include "wbsd.h"
 
 #define DRIVER_NAME "wbsd"
-#define DRIVER_VERSION "1.2"
+#define DRIVER_VERSION "1.3"
 
 #ifdef CONFIG_MMC_DEBUG
 #define DBG(x...) \
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 2c6dc24..b780307 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -417,6 +417,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 	struct net_local *lp = netdev_priv(dev);
 	static unsigned version_printed;
 	int i;
+	int tmp;
 	unsigned rev_type = 0;
 	int eeprom_buff[CHKSUM_LEN];
 	int retval;
@@ -492,14 +493,17 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 				goto out2;
 			}
 	}
-printk("PP_addr=0x%x\n", inw(ioaddr + ADD_PORT));
+	printk(KERN_DEBUG "PP_addr at %x: 0x%x\n",
+			ioaddr + ADD_PORT, inw(ioaddr + ADD_PORT));
 
 	ioaddr &= ~3;
 	outw(PP_ChipID, ioaddr + ADD_PORT);
 
-	if (inw(ioaddr + DATA_PORT) != CHIP_EISA_ID_SIG) {
-		printk(KERN_ERR "%s: incorrect signature 0x%x\n",
-			dev->name, inw(ioaddr + DATA_PORT));
+	tmp = inw(ioaddr + DATA_PORT);
+	if (tmp != CHIP_EISA_ID_SIG) {
+		printk(KERN_DEBUG "%s: incorrect signature at %x: 0x%x!="
+			CHIP_EISA_ID_SIG_STR "\n",
+			dev->name, ioaddr + DATA_PORT, tmp);
   		retval = -ENODEV;
   		goto out2;
 	}
diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h
index bd3ad8e..decea26 100644
--- a/drivers/net/cs89x0.h
+++ b/drivers/net/cs89x0.h
@@ -93,6 +93,7 @@
 #endif
 
 #define CHIP_EISA_ID_SIG 0x630E   /*  Product ID Code for Crystal Chip (CS8900 spec 4.3) */
+#define CHIP_EISA_ID_SIG_STR "0x630E"
 
 #ifdef IBMEIPKT
 #define EISA_ID_SIG 0x4D24	/*  IBM */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 5e5d2c3..b82fd15 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3789,6 +3789,7 @@ e1000_netpoll(struct net_device *netdev)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	disable_irq(adapter->pdev->irq);
 	e1000_intr(adapter->pdev->irq, netdev, NULL);
+	e1000_clean_tx_irq(adapter);
 	enable_irq(adapter->pdev->irq);
 }
 #endif
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index e44f8e9..f9e3be9 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -130,12 +130,11 @@ struct sixpack {
 
 #define AX25_6PACK_HEADER_LEN 0
 
-static void sp_start_tx_timer(struct sixpack *);
 static void sixpack_decode(struct sixpack *, unsigned char[], int);
 static int encode_sixpack(unsigned char *, unsigned char *, int, unsigned char);
 
 /*
- * perform the persistence/slottime algorithm for CSMA access. If the
+ * Perform the persistence/slottime algorithm for CSMA access. If the
  * persistence check was successful, write the data to the serial driver.
  * Note that in case of DAMA operation, the data is not sent here.
  */
@@ -143,7 +142,7 @@ static int encode_sixpack(unsigned char *, unsigned char *, int, unsigned char);
 static void sp_xmit_on_air(unsigned long channel)
 {
 	struct sixpack *sp = (struct sixpack *) channel;
-	int actual;
+	int actual, when = sp->slottime;
 	static unsigned char random;
 
 	random = random * 17 + 41;
@@ -159,20 +158,10 @@ static void sp_xmit_on_air(unsigned long channel)
 		sp->tty->driver->write(sp->tty, &sp->led_state, 1);
 		sp->status2 = 0;
 	} else
-		sp_start_tx_timer(sp);
+		mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);
 }
 
 /* ----> 6pack timer interrupt handler and friends. <---- */
-static void sp_start_tx_timer(struct sixpack *sp)
-{
-	int when = sp->slottime;
-
-	del_timer(&sp->tx_t);
-	sp->tx_t.data = (unsigned long) sp;
-	sp->tx_t.function = sp_xmit_on_air;
-	sp->tx_t.expires = jiffies + ((when + 1) * HZ) / 100;
-	add_timer(&sp->tx_t);
-}
 
 /* Encapsulate one AX.25 frame and stuff into a TTY queue. */
 static void sp_encaps(struct sixpack *sp, unsigned char *icp, int len)
@@ -243,8 +232,7 @@ static void sp_encaps(struct sixpack *sp, unsigned char *icp, int len)
 		sp->xleft = count;
 		sp->xhead = sp->xbuff;
 		sp->status2 = count;
-		if (sp->duplex == 0)
-			sp_start_tx_timer(sp);
+		sp_xmit_on_air((unsigned long)sp);
 	}
 
 	return;
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 7cdebe1..0cd5430 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -17,7 +17,7 @@ config MKISS
 
 config 6PACK
 	tristate "Serial port 6PACK driver"
-	depends on AX25 && BROKEN_ON_SMP
+	depends on AX25
 	---help---
 	  6pack is a transmission protocol for the data exchange between your
 	  PC and your TNC (the Terminal Node Controller acts as a kind of
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 82570ec..6ee4771 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -5133,6 +5133,84 @@ static void __devexit skge_remove_one(struct pci_dev *pdev)
 	kfree(pAC);
 }
 
+#ifdef CONFIG_PM
+static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	struct net_device *otherdev = pAC->dev[1];
+
+	if (netif_running(dev)) {
+		netif_carrier_off(dev);
+		DoPrintInterfaceChange = SK_FALSE;
+		SkDrvDeInitAdapter(pAC, 0);  /* performs SkGeClose */
+		netif_device_detach(dev);
+	}
+	if (otherdev != dev) {
+		if (netif_running(otherdev)) {
+			netif_carrier_off(otherdev);
+			DoPrintInterfaceChange = SK_FALSE;
+			SkDrvDeInitAdapter(pAC, 1);  /* performs SkGeClose */
+			netif_device_detach(otherdev);
+		}
+	}
+
+	pci_save_state(pdev);
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+	if (pAC->AllocFlag & SK_ALLOC_IRQ) {
+		free_irq(dev->irq, dev);
+	}
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int skge_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	struct net_device *otherdev = pAC->dev[1];
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	pci_enable_device(pdev);
+	pci_set_master(pdev);
+	if (pAC->GIni.GIMacsFound == 2)
+		ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+	else
+		ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, pAC->Name, dev);
+	if (ret) {
+		printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
+		pAC->AllocFlag &= ~SK_ALLOC_IRQ;
+		dev->irq = 0;
+		pci_disable_device(pdev);
+		return -EBUSY;
+	}
+
+	netif_device_attach(dev);
+	if (netif_running(dev)) {
+		DoPrintInterfaceChange = SK_FALSE;
+		SkDrvInitAdapter(pAC, 0);    /* first device  */
+	}
+	if (otherdev != dev) {
+		netif_device_attach(otherdev);
+		if (netif_running(otherdev)) {
+			DoPrintInterfaceChange = SK_FALSE;
+			SkDrvInitAdapter(pAC, 1);    /* second device  */
+		}
+	}
+
+	return 0;
+}
+#else
+#define skge_suspend NULL
+#define skge_resume NULL
+#endif
+
 static struct pci_device_id skge_pci_tbl[] = {
 	{ PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
@@ -5158,6 +5236,8 @@ static struct pci_driver skge_driver = {
 	.id_table	= skge_pci_tbl,
 	.probe		= skge_probe_one,
 	.remove		= __devexit_p(skge_remove_one),
+	.suspend	= skge_suspend,
+	.resume		= skge_resume,
 };
 
 static int __init skge_init(void)
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
index df44834..6cb49dd 100644
--- a/drivers/net/sk98lin/skgeinit.c
+++ b/drivers/net/sk98lin/skgeinit.c
@@ -2016,7 +2016,7 @@ SK_IOC	IoC)		/* IO context */
 	 * we set the PHY to coma mode and switch to D3 power state.
 	 */
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
 		/* for all ports switch PHY to coma mode */
 		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
index 94a09de..42d2d96 100644
--- a/drivers/net/sk98lin/skxmac2.c
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -1065,7 +1065,7 @@ int		Port)	/* Port Index (MAC_1 + n) */
 	
 	/* WA code for COMA mode */
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 		
 		SK_IN32(IoC, B2_GP_IO, &DWord);
 
@@ -1110,7 +1110,7 @@ int		Port)	/* Port Index (MAC_1 + n) */
 
 	/* WA code for COMA mode */
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 		
 		SK_IN32(IoC, B2_GP_IO, &DWord);
 
@@ -2126,7 +2126,7 @@ SK_U8	Mode)		/* low power mode */
 	int		Ret = 0;
 
 	if (pAC->GIni.GIYukonLite &&
-	    pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+	    pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
 		/* save current power mode */
 		LastMode = pAC->GIni.GP[Port].PPhyPowerState;
@@ -2253,7 +2253,7 @@ int		Port)		/* Port Index (e.g. MAC_1) */
 	int		Ret = 0;
 
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
 		/* save current power mode */
 		LastMode = pAC->GIni.GP[Port].PPhyPowerState;
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 5cacc7a..f157394 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -42,7 +42,7 @@
 #include "skge.h"
 
 #define DRV_NAME		"skge"
-#define DRV_VERSION		"0.7"
+#define DRV_VERSION		"0.8"
 #define PFX			DRV_NAME " "
 
 #define DEFAULT_TX_RING_SIZE	128
@@ -55,7 +55,7 @@
 #define ETH_JUMBO_MTU		9000
 #define TX_WATCHDOG		(5 * HZ)
 #define NAPI_WEIGHT		64
-#define BLINK_HZ		(HZ/4)
+#define BLINK_MS		250
 
 MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver");
 MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
@@ -75,7 +75,6 @@ static const struct pci_device_id skge_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx  */
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
@@ -249,7 +248,7 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	} else {
 		u32 setting;
 
-		switch(ecmd->speed) {
+		switch (ecmd->speed) {
 		case SPEED_1000:
 			if (ecmd->duplex == DUPLEX_FULL)
 				setting = SUPPORTED_1000baseT_Full;
@@ -620,84 +619,98 @@ static int skge_set_coalesce(struct net_device *dev,
 	return 0;
 }
 
-static void skge_led_on(struct skge_hw *hw, int port)
+enum led_mode { LED_MODE_OFF, LED_MODE_ON, LED_MODE_TST };
+static void skge_led(struct skge_port *skge, enum led_mode mode)
 {
+	struct skge_hw *hw = skge->hw;
+	int port = skge->port;
+
+	spin_lock_bh(&hw->phy_lock);
 	if (hw->chip_id == CHIP_ID_GENESIS) {
-		skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
-		skge_write8(hw, B0_LED, LED_STAT_ON);
+		switch (mode) {
+		case LED_MODE_OFF:
+			xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
+			skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
+			skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
+			skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
+			break;
 
-		skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
-		skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
-		skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
+		case LED_MODE_ON:
+			skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
+			skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
 
-		/* For Broadcom Phy only */
-		xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
-	} else {
-		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
-		gm_phy_write(hw, port, PHY_MARV_LED_OVER,
-				  PHY_M_LED_MO_DUP(MO_LED_ON)  |
-				  PHY_M_LED_MO_10(MO_LED_ON)   |
-				  PHY_M_LED_MO_100(MO_LED_ON)  |
-				  PHY_M_LED_MO_1000(MO_LED_ON) |
-				  PHY_M_LED_MO_RX(MO_LED_ON));
-	}
-}
+			skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
+			skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
 
-static void skge_led_off(struct skge_hw *hw, int port)
-{
-	if (hw->chip_id == CHIP_ID_GENESIS) {
-		skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
-		skge_write8(hw, B0_LED, LED_STAT_OFF);
+			break;
 
-		skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
-		skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
+		case LED_MODE_TST:
+			skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
+			skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
+			skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
 
-		/* Broadcom only */
-		xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
+			xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
+			break;
+		}
 	} else {
-		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
-		gm_phy_write(hw, port, PHY_MARV_LED_OVER,
-				  PHY_M_LED_MO_DUP(MO_LED_OFF)  |
-				  PHY_M_LED_MO_10(MO_LED_OFF)   |
-				  PHY_M_LED_MO_100(MO_LED_OFF)  |
-				  PHY_M_LED_MO_1000(MO_LED_OFF) |
-				  PHY_M_LED_MO_RX(MO_LED_OFF));
+		switch (mode) {
+		case LED_MODE_OFF:
+			gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+			gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+				     PHY_M_LED_MO_DUP(MO_LED_OFF)  |
+				     PHY_M_LED_MO_10(MO_LED_OFF)   |
+				     PHY_M_LED_MO_100(MO_LED_OFF)  |
+				     PHY_M_LED_MO_1000(MO_LED_OFF) |
+				     PHY_M_LED_MO_RX(MO_LED_OFF));
+			break;
+		case LED_MODE_ON:
+			gm_phy_write(hw, port, PHY_MARV_LED_CTRL,
+				     PHY_M_LED_PULS_DUR(PULS_170MS) |
+				     PHY_M_LED_BLINK_RT(BLINK_84MS) |
+				     PHY_M_LEDC_TX_CTRL |
+				     PHY_M_LEDC_DP_CTRL);
+		
+			gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+				     PHY_M_LED_MO_RX(MO_LED_OFF) |
+				     (skge->speed == SPEED_100 ?
+				      PHY_M_LED_MO_100(MO_LED_ON) : 0));
+			break;
+		case LED_MODE_TST:
+			gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+			gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+				     PHY_M_LED_MO_DUP(MO_LED_ON)  |
+				     PHY_M_LED_MO_10(MO_LED_ON)   |
+				     PHY_M_LED_MO_100(MO_LED_ON)  |
+				     PHY_M_LED_MO_1000(MO_LED_ON) |
+				     PHY_M_LED_MO_RX(MO_LED_ON));
+		}
 	}
-}
-
-static void skge_blink_timer(unsigned long data)
-{
-	struct skge_port *skge = (struct skge_port *) data;
-	struct skge_hw *hw = skge->hw;
-	unsigned long flags;
-
-	spin_lock_irqsave(&hw->phy_lock, flags);
-	if (skge->blink_on)
-		skge_led_on(hw, skge->port);
-	else
-		skge_led_off(hw, skge->port);
-	spin_unlock_irqrestore(&hw->phy_lock, flags);
-
-	skge->blink_on = !skge->blink_on;
-	mod_timer(&skge->led_blink, jiffies + BLINK_HZ);
+	spin_unlock_bh(&hw->phy_lock);
 }
 
 /* blink LED's for finding board */
 static int skge_phys_id(struct net_device *dev, u32 data)
 {
 	struct skge_port *skge = netdev_priv(dev);
+	unsigned long ms;
+	enum led_mode mode = LED_MODE_TST;
 
 	if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
-		data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+		ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT / HZ) * 1000;
+	else
+		ms = data * 1000;
 
-	/* start blinking */
-	skge->blink_on = 1;
-	mod_timer(&skge->led_blink, jiffies+1);
+	while (ms > 0) {
+		skge_led(skge, mode);
+		mode ^= LED_MODE_TST;
 
-	msleep_interruptible(data * 1000);
-	del_timer_sync(&skge->led_blink);
+		if (msleep_interruptible(BLINK_MS))
+			break;
+		ms -= BLINK_MS;
+	}
 
-	skge_led_off(skge->hw, skge->port);
+	/* back to regular LED state */
+	skge_led(skge, netif_running(dev) ? LED_MODE_ON : LED_MODE_OFF);
 
 	return 0;
 }
@@ -1028,7 +1041,7 @@ static void bcom_check_link(struct skge_hw *hw, int port)
 			}
 
 			/* Check Duplex mismatch */
-			switch(aux & PHY_B_AS_AN_RES_MSK) {
+			switch (aux & PHY_B_AS_AN_RES_MSK) {
 			case PHY_B_RES_1000FD:
 				skge->duplex = DUPLEX_FULL;
 				break;
@@ -1099,7 +1112,7 @@ static void bcom_phy_init(struct skge_port *skge, int jumbo)
 	r |=  XM_MMU_NO_PRE;
 	xm_write16(hw, port, XM_MMU_CMD,r);
 
-	switch(id1) {
+	switch (id1) {
 	case PHY_BCOM_ID1_C0:
 		/*
 		 * Workaround BCOM Errata for the C0 type.
@@ -1194,13 +1207,6 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
 	xm_write16(hw, port, XM_STAT_CMD,
 			XM_SC_CLR_RXC | XM_SC_CLR_TXC);
 
-	/* initialize Rx, Tx and Link LED */
-	skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
-	skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
-
-	skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
-	skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
-
 	/* Unreset the XMAC. */
 	skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
 
@@ -1209,7 +1215,6 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
 	 * namely for the 1000baseTX cards that use the XMAC's
 	 * GMII mode.
 	 */
-	spin_lock_bh(&hw->phy_lock);
 	/* Take external Phy out of reset */
 	r = skge_read32(hw, B2_GP_IO);
 	if (port == 0)
@@ -1219,7 +1224,6 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
 
 	skge_write32(hw, B2_GP_IO, r);
 	skge_read32(hw, B2_GP_IO);
-	spin_unlock_bh(&hw->phy_lock);
 
 	/* Enable GMII interfac */
 	xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
@@ -1569,7 +1573,6 @@ static void yukon_init(struct skge_hw *hw, int port)
 {
 	struct skge_port *skge = netdev_priv(hw->dev[port]);
 	u16 ctrl, ct1000, adv;
-	u16 ledctrl, ledover;
 
 	pr_debug("yukon_init\n");
 	if (skge->autoneg == AUTONEG_ENABLE) {
@@ -1641,32 +1644,11 @@ static void yukon_init(struct skge_hw *hw, int port)
 	gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
 	gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
 
-	/* Setup Phy LED's */
-	ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
-	ledover = 0;
-
-	ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
-
-	/* turn off the Rx LED (LED_RX) */
-	ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
-
-	/* disable blink mode (LED_DUPLEX) on collisions */
-	ctrl |= PHY_M_LEDC_DP_CTRL;
-	gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
-
-	if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) {
-		/* turn on 100 Mbps LED (LED_LINK100) */
-		ledover |= PHY_M_LED_MO_100(MO_LED_ON);
-	}
-
-	if (ledover)
-		gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
-
 	/* Enable phy interrupt on autonegotiation complete (or link up) */
 	if (skge->autoneg == AUTONEG_ENABLE)
-		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
+		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_MSK);
 	else
-		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_DEF_MSK);
 }
 
 static void yukon_reset(struct skge_hw *hw, int port)
@@ -1691,7 +1673,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
 
 	/* WA code for COMA mode -- set PHY reset */
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3)
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3)
 		skge_write32(hw, B2_GP_IO,
 			     (skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9));
 
@@ -1701,7 +1683,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
 
 	/* WA code for COMA mode -- clear PHY reset */
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3)
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3)
 		skge_write32(hw, B2_GP_IO,
 			     (skge_read32(hw, B2_GP_IO) | GP_DIR_9)
 			     & ~GP_IO_9);
@@ -1745,9 +1727,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
 	gma_write16(hw, port, GM_GP_CTRL, reg);
 	skge_read16(hw, GMAC_IRQ_SRC);
 
-	spin_lock_bh(&hw->phy_lock);
 	yukon_init(hw, port);
-	spin_unlock_bh(&hw->phy_lock);
 
 	/* MIB clear */
 	reg = gma_read16(hw, port, GM_PHY_ADDR);
@@ -1796,7 +1776,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
 	skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK);
 	reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3)
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3)
 		reg &= ~GMF_RX_F_FL_ON;
 	skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
 	skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
@@ -1813,19 +1793,19 @@ static void yukon_stop(struct skge_port *skge)
 	int port = skge->port;
 
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3) {
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3) {
 		skge_write32(hw, B2_GP_IO,
 			     skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9);
 	}
 
 	gma_write16(hw, port, GM_GP_CTRL,
 			 gma_read16(hw, port, GM_GP_CTRL)
-			 & ~(GM_GPCR_RX_ENA|GM_GPCR_RX_ENA));
+			 & ~(GM_GPCR_TX_ENA|GM_GPCR_RX_ENA));
 	gma_read16(hw, port, GM_GP_CTRL);
 
 	/* set GPHY Control reset */
-	gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET);
-	gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET);
+	skge_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
+	skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
 }
 
 static void yukon_get_stats(struct skge_port *skge, u64 *data)
@@ -1856,11 +1836,12 @@ static void yukon_mac_intr(struct skge_hw *hw, int port)
 
 	if (status & GM_IS_RX_FF_OR) {
 		++skge->net_stats.rx_fifo_errors;
-		gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO);
+		skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
 	}
+
 	if (status & GM_IS_TX_FF_UR) {
 		++skge->net_stats.tx_fifo_errors;
-		gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU);
+		skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
 	}
 
 }
@@ -1896,7 +1877,7 @@ static void yukon_link_up(struct skge_port *skge)
 	reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
 	gma_write16(hw, port, GM_GP_CTRL, reg);
 
-	gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+	gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_DEF_MSK);
 	skge_link_up(skge);
 }
 
@@ -1904,12 +1885,14 @@ static void yukon_link_down(struct skge_port *skge)
 {
 	struct skge_hw *hw = skge->hw;
 	int port = skge->port;
+	u16 ctrl;
 
 	pr_debug("yukon_link_down\n");
 	gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
-	gm_phy_write(hw, port, GM_GP_CTRL,
-			  gm_phy_read(hw, port, GM_GP_CTRL)
-			  & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA));
+
+	ctrl = gma_read16(hw, port, GM_GP_CTRL);
+	ctrl &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
+	gma_write16(hw, port, GM_GP_CTRL, ctrl);
 
 	if (skge->flow_control == FLOW_MODE_REM_SEND) {
 		/* restore Asymmetric Pause bit */
@@ -2097,10 +2080,12 @@ static int skge_up(struct net_device *dev)
 	skge_write32(hw, B0_IMSK, hw->intr_mask);
 
 	/* Initialze MAC */
+	spin_lock_bh(&hw->phy_lock);
 	if (hw->chip_id == CHIP_ID_GENESIS)
 		genesis_mac_init(hw, port);
 	else
 		yukon_mac_init(hw, port);
+	spin_unlock_bh(&hw->phy_lock);
 
 	/* Configure RAMbuffers */
 	chunk = hw->ram_size / ((hw->ports + 1)*2);
@@ -2116,6 +2101,7 @@ static int skge_up(struct net_device *dev)
 	/* Start receiver BMU */
 	wmb();
 	skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F);
+	skge_led(skge, LED_MODE_ON);
 
 	pr_debug("skge_up completed\n");
 	return 0;
@@ -2140,8 +2126,6 @@ static int skge_down(struct net_device *dev)
 
 	netif_stop_queue(dev);
 
-	del_timer_sync(&skge->led_blink);
-
 	/* Stop transmitter */
 	skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
 	skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
@@ -2175,15 +2159,12 @@ static int skge_down(struct net_device *dev)
 	if (hw->chip_id == CHIP_ID_GENESIS) {
 		skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_SET);
 		skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_SET);
-		skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_STOP);
-		skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_STOP);
 	} else {
 		skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 		skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
 	}
 
-	/* turn off led's */
-	skge_write16(hw, B0_LED, LED_STAT_OFF);
+	skge_led(skge, LED_MODE_OFF);
 
 	skge_tx_clean(skge);
 	skge_rx_clean(skge);
@@ -2633,11 +2614,17 @@ static inline void skge_tx_intr(struct net_device *dev)
 	spin_unlock(&skge->tx_lock);
 }
 
+/* Parity errors seem to happen when Genesis is connected to a switch
+ * with no other ports present. Heartbeat error??
+ */
 static void skge_mac_parity(struct skge_hw *hw, int port)
 {
-	printk(KERN_ERR PFX "%s: mac data parity error\n",
-	       hw->dev[port] ? hw->dev[port]->name
-	       : (port == 0 ? "(port A)": "(port B"));
+	struct net_device *dev = hw->dev[port];
+
+	if (dev) {
+		struct skge_port *skge = netdev_priv(dev);
+		++skge->net_stats.tx_heartbeat_errors;
+	}
 
 	if (hw->chip_id == CHIP_ID_GENESIS)
 		skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
@@ -3083,10 +3070,6 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
 
 	spin_lock_init(&skge->tx_lock);
 
-	init_timer(&skge->led_blink);
-	skge->led_blink.function = skge_blink_timer;
-	skge->led_blink.data = (unsigned long) skge;
-
 	if (hw->chip_id != CHIP_ID_GENESIS) {
 		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 		skge->rx_csum = 1;
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index fced3d2..b432f1b 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -1449,10 +1449,12 @@ enum {
 	PHY_M_IS_DTE_CHANGE	= 1<<2, /* DTE Power Det. Status Changed */
 	PHY_M_IS_POL_CHANGE	= 1<<1, /* Polarity Changed */
 	PHY_M_IS_JABBER		= 1<<0, /* Jabber */
-};
 
-#define PHY_M_DEF_MSK	( PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE | \
-			  PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
+	PHY_M_IS_DEF_MSK	= PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE |
+				  PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR,
+
+	PHY_M_IS_AN_MSK		= PHY_M_IS_AN_ERROR | PHY_M_IS_AN_COMPL,
+};
 
 /*****  PHY_MARV_EXT_CTRL	16 bit r/w	Ext. PHY Specific Ctrl *****/
 enum {
@@ -1509,7 +1511,7 @@ enum {
 	PHY_M_LEDC_TX_C_MSB	= 1<<0, /* Tx Control (MSB, 88E1111 only) */
 };
 
-#define PHY_M_LED_PULS_DUR(x)	(	((x)<<12) & PHY_M_LEDC_PULS_MSK)
+#define PHY_M_LED_PULS_DUR(x)	(((x)<<12) & PHY_M_LEDC_PULS_MSK)
 
 enum {
 	PULS_NO_STR	= 0,/* no pulse stretching */
@@ -1522,7 +1524,7 @@ enum {
 	PULS_1300MS	= 7,/* 1.3 s to 2.7 s */
 };
 
-#define PHY_M_LED_BLINK_RT(x)	(	((x)<<8) & PHY_M_LEDC_BL_R_MSK)
+#define PHY_M_LED_BLINK_RT(x)	(((x)<<8) & PHY_M_LEDC_BL_R_MSK)
 
 enum {
 	BLINK_42MS	= 0,/* 42 ms */
@@ -1602,9 +1604,9 @@ enum {
 	PHY_M_FELP_LED0_MSK = 0xf, /* Bit  3.. 0: LED0 Mask (SPEED) */
 };
 
-#define PHY_M_FELP_LED2_CTRL(x)	(	((x)<<8) & PHY_M_FELP_LED2_MSK)
-#define PHY_M_FELP_LED1_CTRL(x)	(	((x)<<4) & PHY_M_FELP_LED1_MSK)
-#define PHY_M_FELP_LED0_CTRL(x)	(	((x)<<0) & PHY_M_FELP_LED0_MSK)
+#define PHY_M_FELP_LED2_CTRL(x)	(((x)<<8) & PHY_M_FELP_LED2_MSK)
+#define PHY_M_FELP_LED1_CTRL(x)	(((x)<<4) & PHY_M_FELP_LED1_MSK)
+#define PHY_M_FELP_LED0_CTRL(x)	(((x)<<0) & PHY_M_FELP_LED0_MSK)
 
 enum {
 	LED_PAR_CTRL_COLX	= 0x00,
@@ -1640,7 +1642,7 @@ enum {
 	PHY_M_MAC_MD_COPPER	= 5,/* Copper only */
 	PHY_M_MAC_MD_1000BX	= 7,/* 1000Base-X only */
 };
-#define PHY_M_MAC_MODE_SEL(x)	(	((x)<<7) & PHY_M_MAC_MD_MSK)
+#define PHY_M_MAC_MODE_SEL(x)	(((x)<<7) & PHY_M_MAC_MD_MSK)
 
 /*****  PHY_MARV_PHY_CTRL (page 3)		16 bit r/w	LED Control Reg. *****/
 enum {
@@ -1650,10 +1652,10 @@ enum {
 	PHY_M_LEDC_STA0_MSK	= 0xf, /* Bit  3.. 0: STAT0 LED Ctrl. Mask */
 };
 
-#define PHY_M_LEDC_LOS_CTRL(x)	(	((x)<<12) & PHY_M_LEDC_LOS_MSK)
-#define PHY_M_LEDC_INIT_CTRL(x)	(	((x)<<8) & PHY_M_LEDC_INIT_MSK)
-#define PHY_M_LEDC_STA1_CTRL(x)	(	((x)<<4) & PHY_M_LEDC_STA1_MSK)
-#define PHY_M_LEDC_STA0_CTRL(x)	(	((x)<<0) & PHY_M_LEDC_STA0_MSK)
+#define PHY_M_LEDC_LOS_CTRL(x)	(((x)<<12) & PHY_M_LEDC_LOS_MSK)
+#define PHY_M_LEDC_INIT_CTRL(x)	(((x)<<8) & PHY_M_LEDC_INIT_MSK)
+#define PHY_M_LEDC_STA1_CTRL(x)	(((x)<<4) & PHY_M_LEDC_STA1_MSK)
+#define PHY_M_LEDC_STA0_CTRL(x)	(((x)<<0) & PHY_M_LEDC_STA0_MSK)
 
 /* GMAC registers  */
 /* Port Registers */
@@ -2505,8 +2507,6 @@ struct skge_port {
 	dma_addr_t	     dma;
 	unsigned long	     mem_size;
 	unsigned int	     rx_buf_size;
-
-	struct timer_list    led_blink;
 };
 
 
@@ -2606,17 +2606,6 @@ static inline void gma_write16(const struct skge_hw *hw, int port, int r, u16 v)
 	skge_write16(hw, SK_GMAC_REG(port,r), v);
 }
 
-static inline void gma_write32(const struct skge_hw *hw, int port, int r, u32 v)
-{
-	skge_write16(hw, SK_GMAC_REG(port, r), (u16) v);
-	skge_write32(hw, SK_GMAC_REG(port, r+4), (u16)(v >> 16));
-}
-
-static inline void gma_write8(const struct skge_hw *hw, int port, int r, u8 v)
-{
-	skge_write8(hw, SK_GMAC_REG(port,r), v);
-}
-
 static inline void gma_set_addr(struct skge_hw *hw, int port, int reg,
 				    const u8 *addr)
 {
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 7089d86..a9b06b8 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -188,7 +188,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define	SMC_IRQ_TRIGGER_TYPE (( \
 		   machine_is_omap_h2() \
 		|| machine_is_omap_h3() \
-		|| (machine_is_omap_innovator() && !cpu_is_omap150()) \
+		|| (machine_is_omap_innovator() && !cpu_is_omap1510()) \
 	) ? IRQT_FALLING : IRQT_RISING)
 
 
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 201a550..368b8fb 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -66,8 +66,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.34"
-#define DRV_MODULE_RELDATE	"July 25, 2005"
+#define DRV_MODULE_VERSION	"3.35"
+#define DRV_MODULE_RELDATE	"August 6, 2005"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -10421,6 +10421,12 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	tg3_init_coal(tp);
 
+	/* Now that we have fully setup the chip, save away a snapshot
+	 * of the PCI config space.  We need to restore this after
+	 * GRC_MISC_CFG core clock resets and some resume events.
+	 */
+	pci_save_state(tp->pdev);
+
 	err = register_netdev(dev);
 	if (err) {
 		printk(KERN_ERR PFX "Cannot register net device, "
@@ -10430,12 +10436,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	pci_set_drvdata(pdev, dev);
 
-	/* Now that we have fully setup the chip, save away a snapshot
-	 * of the PCI config space.  We need to restore this after
-	 * GRC_MISC_CFG core clock resets and some resume events.
-	 */
-	pci_save_state(tp->pdev);
-
 	printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] (PCI%s:%s:%s) %sBaseT Ethernet ",
 	       dev->name,
 	       tp->board_part_number,
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index fedae89..fb9a112 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -60,7 +60,9 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 			continue;
 
 		/* Ok, try it out.. */
-		ret = allocate_resource(r, res, size, min, -1, align,
+		ret = allocate_resource(r, res, size,
+					r->start ? : min,
+					-1, align,
 					alignf, alignf_data);
 		if (ret == 0)
 			break;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 8d0968b..a9160ad 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -373,6 +373,25 @@ static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_vt82c686_acpi );
 
+/*
+ * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at
+ *	0x88 (128 bytes of power management registers)
+ *	0xd0 (16 bytes of SMB registers)
+ */
+static void __devinit quirk_vt8235_acpi(struct pci_dev *dev)
+{
+	u16 pm, smb;
+
+	pci_read_config_word(dev, 0x88, &pm);
+	pm &= PCI_BASE_ADDRESS_IO_MASK;
+	quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES);
+
+	pci_read_config_word(dev, 0xd0, &smb);
+	smb &= PCI_BASE_ADDRESS_IO_MASK;
+	quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8235,	quirk_vt8235_acpi);
+
 
 #ifdef CONFIG_X86_IO_APIC 
 
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 1ca21d2..84eedc9 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -33,6 +33,11 @@ pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
 	u32 new, check, mask;
 	int reg;
 
+	/* Ignore resources for unimplemented BARs and unused resource slots
+	   for 64 bit BARs. */
+	if (!res->flags)
+		return;
+
 	pcibios_resource_to_bus(dev, &region, res);
 
 	pr_debug("  got res [%lx:%lx] bus [%lx:%lx] flags %lx for "
@@ -67,7 +72,7 @@ pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
 
 	if ((new & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
 	    (PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64)) {
-		new = 0; /* currently everyone zeros the high address */
+		new = region.start >> 16 >> 16;
 		pci_write_config_dword(dev, reg + 4, new);
 		pci_read_config_dword(dev, reg + 4, &check);
 		if (check != new) {
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index d63f22a..43da2e9 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -589,8 +589,8 @@ static void pcmcia_delayed_add_pseudo_device(void *data)
 static inline void pcmcia_add_pseudo_device(struct pcmcia_socket *s)
 {
 	if (!s->pcmcia_state.device_add_pending) {
-		schedule_work(&s->device_add);
 		s->pcmcia_state.device_add_pending = 1;
+		schedule_work(&s->device_add);
 	}
 	return;
 }
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 744e469..62fd705 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -605,9 +605,8 @@ static int yenta_search_res(struct yenta_socket *socket, struct resource *res,
 
 static void yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type, int addr_start, int addr_end)
 {
-	struct pci_bus *bus;
 	struct resource *root, *res;
-	u32 start, end;
+	struct pci_bus_region region;
 	unsigned mask;
 
 	res = socket->dev->resource + PCI_BRIDGE_RESOURCES + nr;
@@ -620,15 +619,13 @@ static void yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned typ
 	if (type & IORESOURCE_IO)
 		mask = ~3;
 
-	bus = socket->dev->subordinate;
-	res->name = bus->name;
+	res->name = socket->dev->subordinate->name;
 	res->flags = type;
 
-	start = config_readl(socket, addr_start) & mask;
-	end = config_readl(socket, addr_end) | ~mask;
-	if (start && end > start && !override_bios) {
-		res->start = start;
-		res->end = end;
+	region.start = config_readl(socket, addr_start) & mask;
+	region.end = config_readl(socket, addr_end) | ~mask;
+	if (region.start && region.end > region.start && !override_bios) {
+		pcibios_bus_to_resource(socket->dev, res, &region);
 		root = pci_find_parent_resource(socket->dev, res);
 		if (root && (request_resource(root, res) == 0))
 			return;
@@ -642,6 +639,7 @@ static void yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned typ
 		    (yenta_search_res(socket, res, BRIDGE_IO_MIN))) {
 			config_writel(socket, addr_start, res->start);
 			config_writel(socket, addr_end, res->end);
+			return;
 		}
 	} else {
 		if (type & IORESOURCE_PREFETCH) {
@@ -650,6 +648,7 @@ static void yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned typ
 			    (yenta_search_res(socket, res, BRIDGE_MEM_MIN))) {
 				config_writel(socket, addr_start, res->start);
 				config_writel(socket, addr_end, res->end);
+				return;
 			}
 			/* Approximating prefetchable by non-prefetchable */
 			res->flags = IORESOURCE_MEM;
@@ -659,6 +658,7 @@ static void yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned typ
 		    (yenta_search_res(socket, res, BRIDGE_MEM_MIN))) {
 			config_writel(socket, addr_start, res->start);
 			config_writel(socket, addr_end, res->end);
+			return;
 		}
 	}
 
@@ -1107,8 +1107,6 @@ static int yenta_dev_suspend (struct pci_dev *dev, pm_message_t state)
 		pci_read_config_dword(dev, 17*4, &socket->saved_state[1]);
 		pci_disable_device(dev);
 
-		free_irq(dev->irq, socket);
-
 		/*
 		 * Some laptops (IBM T22) do not like us putting the Cardbus
 		 * bridge into D3.  At a guess, some other laptop will
@@ -1134,13 +1132,6 @@ static int yenta_dev_resume (struct pci_dev *dev)
 		pci_enable_device(dev);
 		pci_set_master(dev);
 
-		if (socket->cb_irq)
-			if (request_irq(socket->cb_irq, yenta_interrupt,
-			                SA_SHIRQ, "yenta", socket)) {
-				printk(KERN_WARNING "Yenta: request_irq() failed on resume!\n");
-				socket->cb_irq = 0;
-			}
-
 		if (socket->type && socket->type->restore_state)
 			socket->type->restore_state(socket);
 	}
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index 8f4d299..79c74f3 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -8120,20 +8120,22 @@ static struct notifier_block qeth_ip6_notifier = {
 #endif
 
 static int
-qeth_reboot_event(struct notifier_block *this, unsigned long event, void *ptr)
+__qeth_reboot_event_card(struct device *dev, void *data)
 {
-
-	struct device *entry;
 	struct qeth_card *card;
 
-	down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
-	       list_for_each_entry(entry, &qeth_ccwgroup_driver.driver.devices,
-			           driver_list) {
-	               card = (struct qeth_card *) entry->driver_data;
-		       qeth_clear_ip_list(card, 0, 0);
-		       qeth_qdio_clear_card(card, 0);
-	       }
-	up_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
+	card = (struct qeth_card *) dev->driver_data;
+	qeth_clear_ip_list(card, 0, 0);
+	qeth_qdio_clear_card(card, 0);
+	return 0;
+}
+
+static int
+qeth_reboot_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+
+	driver_for_each_device(&qeth_ccwgroup_driver.driver, NULL, NULL,
+			       __qeth_reboot_event_card);
 	return NOTIFY_DONE;
 }
 
diff --git a/drivers/s390/net/qeth_proc.c b/drivers/s390/net/qeth_proc.c
index 0471919..f2ccfea 100644
--- a/drivers/s390/net/qeth_proc.c
+++ b/drivers/s390/net/qeth_proc.c
@@ -27,23 +27,33 @@ const char *VERSION_QETH_PROC_C = "$Revision: 1.13 $";
 #define QETH_PROCFILE_NAME "qeth"
 static struct proc_dir_entry *qeth_procfile;
 
+static int
+qeth_procfile_seq_match(struct device *dev, void *data)
+{
+	return 1;
+}
+
 static void *
 qeth_procfile_seq_start(struct seq_file *s, loff_t *offset)
 {
-	struct list_head *next_card = NULL;
-	int i = 0;
+	struct device *dev;
+	loff_t nr;
 
 	down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
 
-	if (*offset == 0)
+	nr = *offset;
+	if (nr == 0)
 		return SEQ_START_TOKEN;
 
-	/* get card at pos *offset */
-	list_for_each(next_card, &qeth_ccwgroup_driver.driver.devices)
-		if (++i == *offset)
-			return next_card;
+	dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL,
+				 NULL, qeth_procfile_seq_match);
 
-	return NULL;
+	/* get card at pos *offset */
+	nr = *offset;
+	while (nr-- > 1 && dev)
+		dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev,
+					 NULL, qeth_procfile_seq_match);
+	return (void *) dev;
 }
 
 static void
@@ -55,23 +65,21 @@ qeth_procfile_seq_stop(struct seq_file *s, void* it)
 static void *
 qeth_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset)
 {
-	struct list_head *next_card = NULL;
-	struct list_head *current_card;
+	struct device *prev, *next;
 
 	if (it == SEQ_START_TOKEN) {
-		next_card = qeth_ccwgroup_driver.driver.devices.next;
-		if (next_card->next == next_card) /* list empty */
-			return NULL;
-		(*offset)++;
-	} else {
-		current_card = (struct list_head *)it;
-		if (current_card->next == &qeth_ccwgroup_driver.driver.devices)
-			return NULL; /* end of list reached */
-		next_card = current_card->next;
-		(*offset)++;
+		next = driver_find_device(&qeth_ccwgroup_driver.driver,
+					  NULL, NULL, qeth_procfile_seq_match);
+		if (next)
+			(*offset)++;
+		return (void *) next;
 	}
-
-	return next_card;
+	prev = (struct device *) it;
+	next = driver_find_device(&qeth_ccwgroup_driver.driver,
+				  prev, NULL, qeth_procfile_seq_match);
+	if (next)
+		(*offset)++;
+	return (void *) next;
 }
 
 static inline const char *
@@ -126,7 +134,7 @@ qeth_procfile_seq_show(struct seq_file *s, void *it)
 			      "-------------- ---- ------ ---------- ---- "
 			      "---- ----- -----\n");
 	} else {
-		device = list_entry(it, struct device, driver_list);
+		device = (struct device *) it;
 		card = device->driver_data;
 		seq_printf(s, "%s/%s/%s x%02X   %-10s %-14s %-4i ",
 				CARD_RDEV_ID(card),
@@ -180,17 +188,20 @@ static struct proc_dir_entry *qeth_perf_procfile;
 static void *
 qeth_perf_procfile_seq_start(struct seq_file *s, loff_t *offset)
 {
-	struct list_head *next_card = NULL;
-	int i = 0;
+	struct device *dev = NULL;
+	int nr;
 
 	down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
 	/* get card at pos *offset */
-	list_for_each(next_card, &qeth_ccwgroup_driver.driver.devices){
-		if (i == *offset)
-			return next_card;
-		i++;
-	}
-	return NULL;
+	dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL, NULL,
+				 qeth_procfile_seq_match);
+
+	/* get card at pos *offset */
+	nr = *offset;
+	while (nr-- > 1 && dev)
+		dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev,
+					 NULL, qeth_procfile_seq_match);
+	return (void *) dev;
 }
 
 static void
@@ -202,12 +213,14 @@ qeth_perf_procfile_seq_stop(struct seq_file *s, void* it)
 static void *
 qeth_perf_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset)
 {
-	struct list_head *current_card = (struct list_head *)it;
+	struct device *prev, *next;
 
-	if (current_card->next == &qeth_ccwgroup_driver.driver.devices)
-		return NULL; /* end of list reached */
-	(*offset)++;
-	return current_card->next;
+	prev = (struct device *) it;
+	next = driver_find_device(&qeth_ccwgroup_driver.driver, prev,
+				  NULL, qeth_procfile_seq_match);
+	if (next)
+		(*offset)++;
+	return (void *) next;
 }
 
 static int
@@ -216,7 +229,7 @@ qeth_perf_procfile_seq_show(struct seq_file *s, void *it)
 	struct device *device;
 	struct qeth_card *card;
 
-	device = list_entry(it, struct device, driver_list);
+	device = (struct device *) it;
 	card = device->driver_data;
 	seq_printf(s, "For card with devnos %s/%s/%s (%s):\n",
 			CARD_RDEV_ID(card),
@@ -318,8 +331,8 @@ static struct proc_dir_entry *qeth_ipato_procfile;
 static void *
 qeth_ipato_procfile_seq_start(struct seq_file *s, loff_t *offset)
 {
-	struct list_head *next_card = NULL;
-	int i = 0;
+	struct device *dev;
+	loff_t nr;
 
 	down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
 	/* TODO: finish this */
@@ -328,13 +341,16 @@ qeth_ipato_procfile_seq_start(struct seq_file *s, loff_t *offset)
 	 * output driver settings then;
 	 * else output setting for respective card
 	 */
+
+	dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL, NULL,
+				 qeth_procfile_seq_match);
+
 	/* get card at pos *offset */
-	list_for_each(next_card, &qeth_ccwgroup_driver.driver.devices){
-		if (i == *offset)
-			return next_card;
-		i++;
-	}
-	return NULL;
+	nr = *offset;
+	while (nr-- > 1 && dev)
+		dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev,
+					 NULL, qeth_procfile_seq_match);
+	return (void *) dev;
 }
 
 static void
@@ -346,18 +362,14 @@ qeth_ipato_procfile_seq_stop(struct seq_file *s, void* it)
 static void *
 qeth_ipato_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset)
 {
-	struct list_head *current_card = (struct list_head *)it;
+	struct device *prev, *next;
 
-	/* TODO: finish this */
-	/*
-	 * maybe SEQ_SATRT_TOKEN can be returned for offset 0
-	 * output driver settings then;
-	 * else output setting for respective card
-	 */
-	if (current_card->next == &qeth_ccwgroup_driver.driver.devices)
-		return NULL; /* end of list reached */
-	(*offset)++;
-	return current_card->next;
+	prev = (struct device *) it;
+	next = driver_find_device(&qeth_ccwgroup_driver.driver, prev,
+				  NULL, qeth_procfile_seq_match);
+	if (next)
+		(*offset)++;
+	return (void *) next;
 }
 
 static int
@@ -372,7 +384,7 @@ qeth_ipato_procfile_seq_show(struct seq_file *s, void *it)
 	 * output driver settings then;
 	 * else output setting for respective card
 	 */
-	device = list_entry(it, struct device, driver_list);
+	device = (struct device *) it;
 	card = device->driver_data;
 
 	return 0;
diff --git a/drivers/sbus/char/bbc_envctrl.c b/drivers/sbus/char/bbc_envctrl.c
index b8a2c73..d44205d 100644
--- a/drivers/sbus/char/bbc_envctrl.c
+++ b/drivers/sbus/char/bbc_envctrl.c
@@ -7,6 +7,7 @@
 #define __KERNEL_SYSCALLS__
 
 #include <linux/kernel.h>
+#include <linux/kthread.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -459,10 +460,6 @@ static struct task_struct *kenvctrld_task;
 
 static int kenvctrld(void *__unused)
 {
-	daemonize("kenvctrld");
-	allow_signal(SIGKILL);
-	kenvctrld_task = current;
-
 	printk(KERN_INFO "bbc_envctrl: kenvctrld starting...\n");
 	last_warning_jiffies = jiffies - WARN_INTERVAL;
 	for (;;) {
@@ -470,7 +467,7 @@ static int kenvctrld(void *__unused)
 		struct bbc_fan_control *fp;
 
 		msleep_interruptible(POLL_INTERVAL);
-		if (signal_pending(current))
+		if (kthread_should_stop())
 			break;
 
 		for (tp = all_bbc_temps; tp; tp = tp->next) {
@@ -577,7 +574,6 @@ int bbc_envctrl_init(void)
 	int temp_index = 0;
 	int fan_index = 0;
 	int devidx = 0;
-	int err = 0;
 
 	while ((echild = bbc_i2c_getdev(devidx++)) != NULL) {
 		if (!strcmp(echild->prom_name, "temperature"))
@@ -585,9 +581,13 @@ int bbc_envctrl_init(void)
 		if (!strcmp(echild->prom_name, "fan-control"))
 			attach_one_fan(echild, fan_index++);
 	}
-	if (temp_index != 0 && fan_index != 0)
-		err = kernel_thread(kenvctrld, NULL, CLONE_FS | CLONE_FILES);
-	return err;
+	if (temp_index != 0 && fan_index != 0) {
+		kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
+		if (IS_ERR(kenvctrld_task))
+			return PTR_ERR(kenvctrld_task);
+	}
+
+	return 0;
 }
 
 static void destroy_one_temp(struct bbc_cpu_temperature *tp)
@@ -607,26 +607,7 @@ void bbc_envctrl_cleanup(void)
 	struct bbc_cpu_temperature *tp;
 	struct bbc_fan_control *fp;
 
-	if (kenvctrld_task != NULL) {
-		force_sig(SIGKILL, kenvctrld_task);
-		for (;;) {
-			struct task_struct *p;
-			int found = 0;
-
-			read_lock(&tasklist_lock);
-			for_each_process(p) {
-				if (p == kenvctrld_task) {
-					found = 1;
-					break;
-				}
-			}
-			read_unlock(&tasklist_lock);
-			if (!found)
-				break;
-			msleep(1000);
-		}
-		kenvctrld_task = NULL;
-	}
+	kthread_stop(kenvctrld_task);
 
 	tp = all_bbc_temps;
 	while (tp != NULL) {
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index 9a8c572..d765cc1 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -24,6 +24,7 @@
 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/kthread.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
@@ -1010,16 +1011,13 @@ static int kenvctrld(void *__unused)
 
 	poll_interval = 5000; /* TODO env_mon_interval */
 
-	daemonize("kenvctrld");
-	allow_signal(SIGKILL);
-
-	kenvctrld_task = current;
-
 	printk(KERN_INFO "envctrl: %s starting...\n", current->comm);
 	for (;;) {
-		if(msleep_interruptible(poll_interval))
-			break;
+		msleep_interruptible(poll_interval);
 
+		if (kthread_should_stop())
+			break;
+		
 		for (whichcpu = 0; whichcpu < ENVCTRL_MAX_CPU; ++whichcpu) {
 			if (0 < envctrl_read_cpu_info(whichcpu, cputemp,
 						      ENVCTRL_CPUTEMP_MON,
@@ -1041,7 +1039,6 @@ static int kenvctrld(void *__unused)
 
 static int __init envctrl_init(void)
 {
-#ifdef CONFIG_PCI
 	struct linux_ebus *ebus = NULL;
 	struct linux_ebus_device *edev = NULL;
 	struct linux_ebus_child *edev_child = NULL;
@@ -1118,9 +1115,11 @@ done:
 			i2c_childlist[i].addr, (0 == i) ? ("\n") : (" "));
 	}
 
-	err = kernel_thread(kenvctrld, NULL, CLONE_FS | CLONE_FILES);
-	if (err < 0)
+	kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
+	if (IS_ERR(kenvctrld_task)) {
+		err = PTR_ERR(kenvctrld_task);
 		goto out_deregister;
+	}
 
 	return 0;
 
@@ -1133,37 +1132,13 @@ out_iounmap:
 			kfree(i2c_childlist[i].tables);
 	}
 	return err;
-#else
-	return -ENODEV;
-#endif
 }
 
 static void __exit envctrl_cleanup(void)
 {
 	int i;
 
-	if (NULL != kenvctrld_task) {
-		force_sig(SIGKILL, kenvctrld_task);
-		for (;;) {
-			struct task_struct *p;
-			int found = 0;
-
-			read_lock(&tasklist_lock);
-			for_each_process(p) {
-				if (p == kenvctrld_task) {
-					found = 1;
-					break;
-				}
-			}
-			read_unlock(&tasklist_lock);
-
-			if (!found)
-				break;
-
-			msleep(1000);
-		}
-		kenvctrld_task = NULL;
-	}
+	kthread_stop(kenvctrld_task);
 
 	iounmap(i2c);
 	misc_deregister(&envctrl_dev);
diff --git a/drivers/sbus/char/vfc.h b/drivers/sbus/char/vfc.h
index e56a43a..a7782e7 100644
--- a/drivers/sbus/char/vfc.h
+++ b/drivers/sbus/char/vfc.h
@@ -129,8 +129,6 @@ struct vfc_dev {
 	struct vfc_regs *phys_regs;
 	unsigned int control_reg;
 	struct semaphore device_lock_sem;
-	struct timer_list poll_timer;
-	wait_queue_head_t poll_wait;
 	int instance;
 	int busy;
 	unsigned long which_io;
diff --git a/drivers/sbus/char/vfc_dev.c b/drivers/sbus/char/vfc_dev.c
index 86ce541..7a10369 100644
--- a/drivers/sbus/char/vfc_dev.c
+++ b/drivers/sbus/char/vfc_dev.c
@@ -137,7 +137,6 @@ int init_vfc_devstruct(struct vfc_dev *dev, int instance)
 	dev->instance=instance;
 	init_MUTEX(&dev->device_lock_sem);
 	dev->control_reg=0;
-	init_waitqueue_head(&dev->poll_wait);
 	dev->busy=0;
 	return 0;
 }
diff --git a/drivers/sbus/char/vfc_i2c.c b/drivers/sbus/char/vfc_i2c.c
index 1faf1e7..739cad9 100644
--- a/drivers/sbus/char/vfc_i2c.c
+++ b/drivers/sbus/char/vfc_i2c.c
@@ -79,25 +79,10 @@ int vfc_pcf8584_init(struct vfc_dev *dev)
 	return 0;
 }
 
-void vfc_i2c_delay_wakeup(struct vfc_dev *dev) 
-{
-	/* Used to profile code and eliminate too many delays */
-	VFC_I2C_DEBUG_PRINTK(("vfc%d: Delaying\n", dev->instance));
-	wake_up(&dev->poll_wait);
-}
-
 void vfc_i2c_delay_no_busy(struct vfc_dev *dev, unsigned long usecs) 
 {
-	DEFINE_WAIT(wait);
-	init_timer(&dev->poll_timer);
-	dev->poll_timer.expires = jiffies + usecs_to_jiffies(usecs);
-	dev->poll_timer.data=(unsigned long)dev;
-	dev->poll_timer.function=(void *)(unsigned long)vfc_i2c_delay_wakeup;
-	add_timer(&dev->poll_timer);
-	prepare_to_wait(&dev->poll_wait, &wait, TASK_UNINTERRUPTIBLE);
-	schedule();
-	del_timer(&dev->poll_timer);
-	finish_wait(&dev->poll_wait, &wait);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(usecs_to_jiffies(usecs));
 }
 
 void inline vfc_i2c_delay(struct vfc_dev *dev) 
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 96df148..f1e8c42 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -424,7 +424,7 @@ config SCSI_IN2000
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 
 config SCSI_SATA
-	bool "Serial ATA (SATA) support"
+	tristate "Serial ATA (SATA) support"
 	depends on SCSI
 	help
 	  This driver family supports Serial ATA host controllers
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 3a11a53..4ab0786 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -15,11 +15,7 @@
 #define AAC_MAX_LUN		(8)
 
 #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
-/*
- *  max_sectors is an unsigned short, otherwise limit is 0x100000000 / 512
- * Linux has starvation problems if we permit larger than 4MB I/O ...
- */
-#define AAC_MAX_32BIT_SGBCOUNT	((unsigned short)8192)
+#define AAC_MAX_32BIT_SGBCOUNT	((unsigned short)512)
 
 /*
  * These macros convert from physical channels to virtual channels
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index c1a4f97..562da90 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -374,7 +374,8 @@ static int aac_slave_configure(struct scsi_device *sdev)
 	else
 		scsi_adjust_queue_depth(sdev, 0, 1);
 
-	if (host->max_sectors < AAC_MAX_32BIT_SGBCOUNT)
+	if (!(((struct aac_dev *)host->hostdata)->adapter_info.options
+	  & AAC_OPT_NEW_COMM))
 		blk_queue_max_segment_size(sdev->request_queue, 65536);
 
 	return 0;
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 116d0f5..687f19e 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -1264,14 +1264,12 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
 	}
 	switch ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED))) {
 	case AHC_DEV_Q_BASIC:
-		scsi_adjust_queue_depth(sdev,
-					MSG_SIMPLE_TASK,
-					dev->openings + dev->active);
+		scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
+		scsi_activate_tcq(sdev, dev->openings + dev->active);
 		break;
 	case AHC_DEV_Q_TAGGED:
-		scsi_adjust_queue_depth(sdev,
-					MSG_ORDERED_TASK,
-					dev->openings + dev->active);
+		scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
+		scsi_activate_tcq(sdev, dev->openings + dev->active);
 		break;
 	default:
 		/*
@@ -1280,9 +1278,7 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
 		 * serially on the controller/device.  This should
 		 * remove some latency.
 		 */
-		scsi_adjust_queue_depth(sdev,
-					/*NON-TAGGED*/0,
-					/*queue depth*/2);
+		scsi_deactivate_tcq(sdev, 2);
 		break;
 	}
 }
@@ -1635,9 +1631,9 @@ ahc_send_async(struct ahc_softc *ahc, char channel,
 		spi_period(starget) = tinfo->curr.period;
 		spi_width(starget) = tinfo->curr.width;
 		spi_offset(starget) = tinfo->curr.offset;
-		spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ;
-		spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ;
-		spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ;
+		spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0;
+		spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0;
+		spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0;
 		spi_display_xfer_agreement(starget);
 		break;
 	}
@@ -2429,12 +2425,14 @@ static void ahc_linux_set_dt(struct scsi_target *starget, int dt)
 	unsigned int ppr_options = tinfo->goal.ppr_options
 		& ~MSG_EXT_PPR_DT_REQ;
 	unsigned int period = tinfo->goal.period;
+	unsigned int width = tinfo->goal.width;
 	unsigned long flags;
 	struct ahc_syncrate *syncrate;
 
 	if (dt) {
-		period = 9;	/* 12.5ns is the only period valid for DT */
 		ppr_options |= MSG_EXT_PPR_DT_REQ;
+		if (!width)
+			ahc_linux_set_width(starget, 1);
 	} else if (period == 9)
 		period = 10;	/* if resetting DT, period must be >= 25ns */
 
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm.c b/drivers/scsi/aic7xxx/aicasm/aicasm.c
index c346394..f936b69 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm.c
@@ -369,7 +369,7 @@ output_code()
 
 		fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x",
 			cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n",
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 			cur_instr->format.bytes[0],
 			cur_instr->format.bytes[1],
 			cur_instr->format.bytes[2],
@@ -613,7 +613,7 @@ output_listing(char *ifilename)
 				line++;
 		}
 		fprintf(listfile, "%03x %02x%02x%02x%02x", instrptr,
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 			cur_instr->format.bytes[0],
 			cur_instr->format.bytes[1],
 			cur_instr->format.bytes[2],
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h b/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
index 3e80f07..e64f802 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
@@ -42,8 +42,10 @@
  * $FreeBSD$
  */
 
+#include <asm/byteorder.h>
+
 struct ins_format1 {
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 	uint32_t	immediate	: 8,
 			source		: 9,
 			destination	: 9,
@@ -61,7 +63,7 @@ struct ins_format1 {
 };
 
 struct ins_format2 {
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 	uint32_t	shift_control	: 8,
 			source		: 9,
 			destination	: 9,
@@ -79,7 +81,7 @@ struct ins_format2 {
 };
 
 struct ins_format3 {
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 	uint32_t	immediate	: 8,
 			source		: 9,
 			address		: 10,
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 929170d..600ba12 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -183,7 +183,7 @@
  * cross a page boundy.
  */
 #define SEGMENTX_LEN	(sizeof(struct SGentry)*DC395x_MAX_SG_LISTENTRY)
-#define VIRTX_LEN	(sizeof(void *) * DC395x_MAX_SG_LISTENTRY)
+
 
 struct SGentry {
 	u32 address;		/* bus! address */
@@ -235,7 +235,6 @@ struct ScsiReqBlk {
 	u8 sg_count;			/* No of HW sg entries for this request */
 	u8 sg_index;			/* Index of HW sg entry for this request */
 	u32 total_xfer_length;		/* Total number of bytes remaining to be transfered */
-	void **virt_map;
 	unsigned char *virt_addr;	/* Virtual address of current transfer position */
 
 	/*
@@ -1022,14 +1021,14 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
 			reqlen, cmd->request_buffer, cmd->use_sg,
 			srb->sg_count);
 
+		srb->virt_addr = page_address(sl->page);
 		for (i = 0; i < srb->sg_count; i++) {
-			u32 seglen = (u32)sg_dma_len(sl + i);
-			sgp[i].address = (u32)sg_dma_address(sl + i);
+			u32 busaddr = (u32)sg_dma_address(&sl[i]);
+			u32 seglen = (u32)sl[i].length;
+			sgp[i].address = busaddr;
 			sgp[i].length = seglen;
 			srb->total_xfer_length += seglen;
-			srb->virt_map[i] = kmap(sl[i].page);
 		}
-		srb->virt_addr = srb->virt_map[0];
 		sgp += srb->sg_count - 1;
 
 		/*
@@ -1976,7 +1975,6 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
 	int segment = cmd->use_sg;
 	u32 xferred = srb->total_xfer_length - left; /* bytes transfered */
 	struct SGentry *psge = srb->segment_x + srb->sg_index;
-	void **virt = srb->virt_map;
 
 	dprintkdbg(DBG_0,
 		"sg_update_list: Transfered %i of %i bytes, %i remain\n",
@@ -2016,16 +2014,16 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
 
 	/* We have to walk the scatterlist to find it */
 	sg = (struct scatterlist *)cmd->request_buffer;
-	idx = 0;
 	while (segment--) {
 		unsigned long mask =
 		    ~((unsigned long)sg->length - 1) & PAGE_MASK;
 		if ((sg_dma_address(sg) & mask) == (psge->address & mask)) {
-			srb->virt_addr = virt[idx] + (psge->address & ~PAGE_MASK);
+			srb->virt_addr = (page_address(sg->page)
+					   + psge->address -
+					   (psge->address & PAGE_MASK));
 			return;
 		}
 		++sg;
-		++idx;
 	}
 
 	dprintkl(KERN_ERR, "sg_update_list: sg_to_virt failed\n");
@@ -2151,7 +2149,7 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 				DC395x_read32(acb, TRM_S1040_DMA_CXCNT));
 		}
 		/*
-		 * calculate all the residue data that not yet transfered
+		 * calculate all the residue data that not yet tranfered
 		 * SCSI transfer counter + left in SCSI FIFO data
 		 *
 		 * .....TRM_S1040_SCSI_COUNTER (24bits)
@@ -3269,7 +3267,6 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
 	struct scsi_cmnd *cmd = srb->cmd;
 	enum dma_data_direction dir = cmd->sc_data_direction;
 	if (cmd->use_sg && dir != PCI_DMA_NONE) {
-		int i;
 		/* unmap DC395x SG list */
 		dprintkdbg(DBG_SG, "pci_unmap_srb: list=%08x(%05x)\n",
 			srb->sg_bus_addr, SEGMENTX_LEN);
@@ -3279,8 +3276,6 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
 		dprintkdbg(DBG_SG, "pci_unmap_srb: segs=%i buffer=%p\n",
 			cmd->use_sg, cmd->request_buffer);
 		/* unmap the sg segments */
-		for (i = 0; i < srb->sg_count; i++)
-			kunmap(virt_to_page(srb->virt_map[i]));
 		pci_unmap_sg(acb->dev,
 			     (struct scatterlist *)cmd->request_buffer,
 			     cmd->use_sg, dir);
@@ -3327,7 +3322,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
 
 	if (cmd->use_sg) {
 		struct scatterlist* sg = (struct scatterlist *)cmd->request_buffer;
-		ptr = (struct ScsiInqData *)(srb->virt_map[0] + sg->offset);
+		ptr = (struct ScsiInqData *)(page_address(sg->page) + sg->offset);
 	} else {
 		ptr = (struct ScsiInqData *)(cmd->request_buffer);
 	}
@@ -4262,9 +4257,8 @@ static void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
 	const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
 
 	for (i = 0; i < DC395x_MAX_SRB_CNT; i += srbs_per_page)
-		kfree(acb->srb_array[i].segment_x);
-
-	vfree(acb->srb_array[0].virt_map);
+		if (acb->srb_array[i].segment_x)
+			kfree(acb->srb_array[i].segment_x);
 }
 
 
@@ -4280,12 +4274,9 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
 	int srb_idx = 0;
 	unsigned i = 0;
 	struct SGentry *ptr;
-	void **virt_array;
 
-	for (i = 0; i < DC395x_MAX_SRB_CNT; i++) {
+	for (i = 0; i < DC395x_MAX_SRB_CNT; i++)
 		acb->srb_array[i].segment_x = NULL;
-		acb->srb_array[i].virt_map = NULL;
-	}
 
 	dprintkdbg(DBG_1, "Allocate %i pages for SG tables\n", pages);
 	while (pages--) {
@@ -4306,19 +4297,6 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
 		    ptr + (i * DC395x_MAX_SG_LISTENTRY);
 	else
 		dprintkl(KERN_DEBUG, "No space for tmsrb SG table reserved?!\n");
-
-	virt_array = vmalloc((DC395x_MAX_SRB_CNT + 1) * DC395x_MAX_SG_LISTENTRY * sizeof(void*));
-
-	if (!virt_array) {
-		adapter_sg_tables_free(acb);
-		return 1;
-	}
-
-	for (i = 0; i < DC395x_MAX_SRB_CNT + 1; i++) {
-		acb->srb_array[i].virt_map = virt_array;
-		virt_array += DC395x_MAX_SG_LISTENTRY;
-	}
-
 	return 0;
 }
 
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index e237052..7235f94 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -907,9 +907,13 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
 		raptorFlag = TRUE;
 	}
 
-
+	if (pci_request_regions(pDev, "dpt_i2o")) {
+		PERROR("dpti: adpt_config_hba: pci request region failed\n");
+		return -EINVAL;
+	}
 	base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size);
 	if (!base_addr_virt) {
+		pci_release_regions(pDev);
 		PERROR("dpti: adpt_config_hba: io remap failed\n");
 		return -EINVAL;
 	}
@@ -919,6 +923,7 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
 		if (!msg_addr_virt) {
 			PERROR("dpti: adpt_config_hba: io remap failed on BAR1\n");
 			iounmap(base_addr_virt);
+			pci_release_regions(pDev);
 			return -EINVAL;
 		}
 	} else {
@@ -932,6 +937,7 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
 			iounmap(msg_addr_virt);
 		}
 		iounmap(base_addr_virt);
+		pci_release_regions(pDev);
 		return -ENOMEM;
 	}
 	memset(pHba, 0, sizeof(adpt_hba));
@@ -1027,6 +1033,7 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba)
 	up(&adpt_configuration_lock);
 
 	iounmap(pHba->base_addr_virt);
+	pci_release_regions(pHba->pDev);
 	if(pHba->msg_addr_virt != pHba->base_addr_virt){
 		iounmap(pHba->msg_addr_virt);
 	}
diff --git a/drivers/scsi/ibmvscsi/srp.h b/drivers/scsi/ibmvscsi/srp.h
index 2ae5154..7d8e4c4 100644
--- a/drivers/scsi/ibmvscsi/srp.h
+++ b/drivers/scsi/ibmvscsi/srp.h
@@ -35,7 +35,7 @@
 enum srp_types {
 	SRP_LOGIN_REQ_TYPE = 0x00,
 	SRP_LOGIN_RSP_TYPE = 0xC0,
-	SRP_LOGIN_REJ_TYPE = 0x80,
+	SRP_LOGIN_REJ_TYPE = 0xC2,
 	SRP_I_LOGOUT_TYPE = 0x03,
 	SRP_T_LOGOUT_TYPE = 0x80,
 	SRP_TSK_MGMT_TYPE = 0x01,
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 6dfcb4f..4cdd891 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -133,10 +133,12 @@
 /* 6.10.00  - Remove 1G Addressing Limitations                               */
 /* 6.11.xx  - Get VersionInfo buffer off the stack !              DDTS 60401 */
 /* 6.11.xx  - Make Logical Drive Info structure safe for DMA      DDTS 60639 */
-/* 7.10.xx  - Add highmem_io flag in SCSI Templete for 2.4 kernels           */
+/* 7.10.18  - Add highmem_io flag in SCSI Templete for 2.4 kernels           */
 /*          - Fix path/name for scsi_hosts.h include for 2.6 kernels         */
 /*          - Fix sort order of 7k                                           */
 /*          - Remove 3 unused "inline" functions                             */
+/* 7.12.xx  - Use STATIC functions whereever possible                        */
+/*          - Clean up deprecated MODULE_PARM calls                          */
 /*****************************************************************************/
 
 /*
@@ -207,8 +209,8 @@ module_param(ips, charp, 0);
 /*
  * DRIVER_VER
  */
-#define IPS_VERSION_HIGH        "7.10"
-#define IPS_VERSION_LOW         ".18 "
+#define IPS_VERSION_HIGH        "7.12"
+#define IPS_VERSION_LOW         ".02 "
 
 #if !defined(__i386__) && !defined(__ia64__) && !defined(__x86_64__)
 #warning "This driver has only been tested on the x86/ia64/x86_64 platforms"
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index 480e06f..505e967 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -87,15 +87,14 @@
       #define scsi_set_pci_device(sh,dev) (0)
    #endif
 
-   #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-   
-      #ifndef irqreturn_t
-         typedef void irqreturn_t;
-      #endif 
-      
+   #ifndef IRQ_NONE
+      typedef void irqreturn_t;
       #define IRQ_NONE
       #define IRQ_HANDLED
       #define IRQ_RETVAL(x)
+   #endif
+   
+   #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
       #define IPS_REGISTER_HOSTS(SHT)      scsi_register_module(MODULE_SCSI_HA,SHT)
       #define IPS_UNREGISTER_HOSTS(SHT)    scsi_unregister_module(MODULE_SCSI_HA,SHT)
       #define IPS_ADD_HOST(shost,device)
@@ -123,6 +122,10 @@
    #ifndef min
       #define min(x,y) ((x) < (y) ? x : y)
    #endif
+   
+   #ifndef __iomem       /* For clean compiles in earlier kernels without __iomem annotations */
+      #define __iomem
+   #endif
 
    #define pci_dma_hi32(a)         ((a >> 16) >> 16)
    #define pci_dma_lo32(a)         (a & 0xffffffff)
@@ -1206,13 +1209,13 @@ typedef struct {
 
 #define IPS_VER_MAJOR 7
 #define IPS_VER_MAJOR_STRING "7"
-#define IPS_VER_MINOR 10
-#define IPS_VER_MINOR_STRING "10"
-#define IPS_VER_BUILD 18
-#define IPS_VER_BUILD_STRING "18"
-#define IPS_VER_STRING "7.10.18"
+#define IPS_VER_MINOR 12
+#define IPS_VER_MINOR_STRING "12"
+#define IPS_VER_BUILD 02
+#define IPS_VER_BUILD_STRING "02"
+#define IPS_VER_STRING "7.12.02"
 #define IPS_RELEASE_ID 0x00020000
-#define IPS_BUILD_IDENT 731
+#define IPS_BUILD_IDENT 761
 #define IPS_LEGALCOPYRIGHT_STRING "(C) Copyright IBM Corp. 1994, 2002. All Rights Reserved."
 #define IPS_ADAPTECCOPYRIGHT_STRING "(c) Copyright Adaptec, Inc. 2002 to 2004. All Rights Reserved."
 #define IPS_DELLCOPYRIGHT_STRING "(c) Copyright Dell 2004. All Rights Reserved."
@@ -1223,12 +1226,12 @@ typedef struct {
 #define IPS_VER_SERVERAID2 "2.88.13"
 #define IPS_VER_NAVAJO "2.88.13"
 #define IPS_VER_SERVERAID3 "6.10.24"
-#define IPS_VER_SERVERAID4H "7.10.11"
-#define IPS_VER_SERVERAID4MLx "7.10.18"
-#define IPS_VER_SARASOTA "7.10.18"
-#define IPS_VER_MARCO "7.10.18"
-#define IPS_VER_SEBRING "7.10.18"
-#define IPS_VER_KEYWEST "7.10.18"
+#define IPS_VER_SERVERAID4H "7.12.02"
+#define IPS_VER_SERVERAID4MLx "7.12.02"
+#define IPS_VER_SARASOTA "7.12.02"
+#define IPS_VER_MARCO "7.12.02"
+#define IPS_VER_SEBRING "7.12.02"
+#define IPS_VER_KEYWEST "7.12.02"
 
 /* Compatability IDs for various adapters */
 #define IPS_COMPAT_UNKNOWN ""
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 794fb55..6a75ec2 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -385,6 +385,7 @@ int ata_scsi_error(struct Scsi_Host *host)
 	 * appropriate place
 	 */
 	host->host_failed--;
+	INIT_LIST_HEAD(&host->eh_cmd_q);
 
 	DPRINTK("EXIT\n");
 	return 0;
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index 140cea0..efd7d7a 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -468,7 +468,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
 	for (i = 0; i < last; i++) {
 		buf[idx++] = cpu_to_le32(sg_dma_address(&sg[i]));
 		buf[idx++] = cpu_to_le32(sg_dma_len(&sg[i]));
-		total_len += sg[i].length;
+		total_len += sg_dma_len(&sg[i]);
 	}
 	buf[idx - 1] |= cpu_to_le32(ATA_PRD_EOT);
 	sgt_len = idx * 4;
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 2d3c4ac4..48edd67 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -336,9 +336,23 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
 	unsigned long flags;
 	const int size = sizeof(struct scsi_target)
 		+ shost->transportt->target_size;
-	struct scsi_target *starget = kmalloc(size, GFP_ATOMIC);
+	struct scsi_target *starget;
 	struct scsi_target *found_target;
 
+	/*
+	 * Obtain the real parent from the transport. The transport
+	 * is allowed to fail (no error) if there is nothing at that
+	 * target id.
+	 */
+	if (shost->transportt->target_parent) {
+		spin_lock_irqsave(shost->host_lock, flags);
+		parent = shost->transportt->target_parent(shost, channel, id);
+		spin_unlock_irqrestore(shost->host_lock, flags);
+		if (!parent)
+			return NULL;
+	}
+
+	starget = kmalloc(size, GFP_KERNEL);
 	if (!starget) {
 		printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__);
 		return NULL;
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 35d1c1e..e6412fc 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -1022,6 +1022,23 @@ static int fc_rport_match(struct attribute_container *cont,
 	return &i->rport_attr_cont.ac == cont;
 }
 
+
+/*
+ * Must be called with shost->host_lock held
+ */
+static struct device *fc_target_parent(struct Scsi_Host *shost,
+					int channel, uint id)
+{
+	struct fc_rport *rport;
+
+	list_for_each_entry(rport, &fc_host_rports(shost), peers)
+		if ((rport->channel == channel) &&
+		    (rport->scsi_target_id == id))
+			return &rport->dev;
+
+	return NULL;
+}
+
 struct scsi_transport_template *
 fc_attach_transport(struct fc_function_template *ft)
 {
@@ -1057,6 +1074,8 @@ fc_attach_transport(struct fc_function_template *ft)
 
 	/* Transport uses the shost workq for scsi scanning */
 	i->t.create_work_queue = 1;
+
+	i->t.target_parent = fc_target_parent;
 	
 	/*
 	 * Setup SCSI Target Attributes.
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 0291a8f..0a7839d 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4149,12 +4149,10 @@ static int __init init_st(void)
 			do_create_driverfs_files();
 			return 0;
 		}
-		if (st_sysfs_class)
-			class_destroy(st_sysfs_class);
 		unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
-
 					 ST_MAX_TAPE_ENTRIES);
 	}
+	class_destroy(st_sysfs_class);
 
 	printk(KERN_ERR "Unable to get major %d for SCSI tapes\n", SCSI_TAPE_MAJOR);
 	return 1;
@@ -4162,13 +4160,11 @@ static int __init init_st(void)
 
 static void __exit exit_st(void)
 {
-	if (st_sysfs_class)
-		class_destroy(st_sysfs_class);
-	st_sysfs_class = NULL;
 	do_remove_driverfs_files();
 	scsi_unregister_driver(&st_template.gendrv);
 	unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
 				 ST_MAX_TAPE_ENTRIES);
+	class_destroy(st_sysfs_class);
 	kfree(scsi_tapes);
 	printk(KERN_INFO "st: Unloaded.\n");
 }
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 5f6187b..73c8a08 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -40,13 +40,15 @@
 #define TX_NUM_FIFO	4
 #define TX_BUF_SIZE	32
 
+#define SCC_WAIT_CLOSING 100
+
 struct uart_cpm_port {
 	struct uart_port	port;
-	u16			rx_nrfifos;	
+	u16			rx_nrfifos;
 	u16			rx_fifosize;
-	u16			tx_nrfifos;	
+	u16			tx_nrfifos;
 	u16			tx_fifosize;
-	smc_t			*smcp;	
+	smc_t			*smcp;
 	smc_uart_t		*smcup;
 	scc_t			*sccp;
 	scc_uart_t		*sccup;
@@ -67,6 +69,8 @@ struct uart_cpm_port {
 	int			 bits;
 	/* Keep track of 'odd' SMC2 wirings */
 	int			is_portb;
+	/* wait on close if needed */
+	int 			wait_closing;
 };
 
 extern int cpm_uart_port_map[UART_NR];
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 29db677..d639ac9 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -9,9 +9,10 @@
  *
  *  Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
  *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
- * 
+ *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
+ *            (C) 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -70,8 +71,22 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
 
 /**************************************************************/
 
+static inline unsigned long cpu2cpm_addr(void *addr)
+{
+	if ((unsigned long)addr >= CPM_ADDR)
+		return (unsigned long)addr;
+	return virt_to_bus(addr);
+}
+
+static inline void *cpm2cpu_addr(unsigned long addr)
+{
+	if (addr >= CPM_ADDR)
+		return (void *)addr;
+	return bus_to_virt(addr);
+}
+
 /*
- * Check, if transmit buffers are processed		
+ * Check, if transmit buffers are processed
 */
 static unsigned int cpm_uart_tx_empty(struct uart_port *port)
 {
@@ -143,15 +158,18 @@ static void cpm_uart_start_tx(struct uart_port *port, unsigned int tty_start)
 	}
 
 	if (cpm_uart_tx_pump(port) != 0) {
-		if (IS_SMC(pinfo))
+		if (IS_SMC(pinfo)) {
 			smcp->smc_smcm |= SMCM_TX;
-		else
+			smcp->smc_smcmr |= SMCMR_TEN;
+		} else {
 			sccp->scc_sccm |= UART_SCCM_TX;
+			pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT;
+		}
 	}
 }
 
 /*
- * Stop receiver 
+ * Stop receiver
  */
 static void cpm_uart_stop_rx(struct uart_port *port)
 {
@@ -176,7 +194,7 @@ static void cpm_uart_enable_ms(struct uart_port *port)
 }
 
 /*
- * Generate a break. 
+ * Generate a break.
  */
 static void cpm_uart_break_ctl(struct uart_port *port, int break_state)
 {
@@ -231,7 +249,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
 		/* get number of characters, and check spce in flip-buffer */
 		i = bdp->cbd_datlen;
 
-		/* If we have not enough room in tty flip buffer, then we try 
+		/* If we have not enough room in tty flip buffer, then we try
 		 * later, which will be the next rx-interrupt or a timeout
 		 */
 		if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
@@ -243,7 +261,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
 		}
 
 		/* get pointer */
-		cp = (unsigned char *)bus_to_virt(bdp->cbd_bufaddr);
+		cp = cpm2cpu_addr(bdp->cbd_bufaddr);
 
 		/* loop through the buffer */
 		while (i-- > 0) {
@@ -265,13 +283,14 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
 		}		/* End while (i--) */
 
 		/* This BD is ready to be used again. Clear status. get next */
-		bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
+		bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID);
 		bdp->cbd_sc |= BD_SC_EMPTY;
 
 		if (bdp->cbd_sc & BD_SC_WRAP)
 			bdp = pinfo->rx_bd_base;
 		else
 			bdp++;
+
 	} /* End for (;;) */
 
 	/* Write back buffer pointer */
@@ -336,22 +355,22 @@ static irqreturn_t cpm_uart_int(int irq, void *data, struct pt_regs *regs)
 
 	if (IS_SMC(pinfo)) {
 		events = smcp->smc_smce;
+		smcp->smc_smce = events;
 		if (events & SMCM_BRKE)
 			uart_handle_break(port);
 		if (events & SMCM_RX)
 			cpm_uart_int_rx(port, regs);
 		if (events & SMCM_TX)
 			cpm_uart_int_tx(port, regs);
-		smcp->smc_smce = events;
 	} else {
 		events = sccp->scc_scce;
+		sccp->scc_scce = events;
 		if (events & UART_SCCM_BRKE)
 			uart_handle_break(port);
 		if (events & UART_SCCM_RX)
 			cpm_uart_int_rx(port, regs);
 		if (events & UART_SCCM_TX)
 			cpm_uart_int_tx(port, regs);
-		sccp->scc_scce = events;
 	}
 	return (events) ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -360,6 +379,7 @@ static int cpm_uart_startup(struct uart_port *port)
 {
 	int retval;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+	int line = pinfo - cpm_uart_ports;
 
 	pr_debug("CPM uart[%d]:startup\n", port->line);
 
@@ -376,9 +396,19 @@ static int cpm_uart_startup(struct uart_port *port)
 		pinfo->sccp->scc_sccm |= UART_SCCM_RX;
 	}
 
+	if (!(pinfo->flags & FLAG_CONSOLE))
+		cpm_line_cr_cmd(line,CPM_CR_INIT_TRX);
 	return 0;
 }
 
+inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo)
+{
+	unsigned long target_jiffies = jiffies + pinfo->wait_closing;
+
+	while (!time_after(jiffies, target_jiffies))
+   		schedule();
+}
+
 /*
  * Shutdown the uart
  */
@@ -394,6 +424,12 @@ static void cpm_uart_shutdown(struct uart_port *port)
 
 	/* If the port is not the console, disable Rx and Tx. */
 	if (!(pinfo->flags & FLAG_CONSOLE)) {
+		/* Wait for all the BDs marked sent */
+		while(!cpm_uart_tx_empty(port))
+			schedule_timeout(2);
+		if(pinfo->wait_closing)
+			cpm_uart_wait_until_send(pinfo);
+
 		/* Stop uarts */
 		if (IS_SMC(pinfo)) {
 			volatile smc_t *smcp = pinfo->smcp;
@@ -502,7 +538,7 @@ static void cpm_uart_set_termios(struct uart_port *port,
 	 */
 	if ((termios->c_cflag & CREAD) == 0)
 		port->read_status_mask &= ~BD_SC_EMPTY;
-	
+
 	spin_lock_irqsave(&port->lock, flags);
 
 	/* Start bit has not been added (so don't, because we would just
@@ -569,7 +605,8 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 		/* Pick next descriptor and fill from buffer */
 		bdp = pinfo->tx_cur;
 
-		p = bus_to_virt(bdp->cbd_bufaddr);
+		p = cpm2cpu_addr(bdp->cbd_bufaddr);
+
 		*p++ = xmit->buf[xmit->tail];
 		bdp->cbd_datlen = 1;
 		bdp->cbd_sc |= BD_SC_READY;
@@ -595,7 +632,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 
 	while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
 		count = 0;
-		p = bus_to_virt(bdp->cbd_bufaddr);
+		p = cpm2cpu_addr(bdp->cbd_bufaddr);
 		while (count < pinfo->tx_fifosize) {
 			*p++ = xmit->buf[xmit->tail];
 			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -606,6 +643,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 		}
 		bdp->cbd_datlen = count;
 		bdp->cbd_sc |= BD_SC_READY;
+		__asm__("eieio");
 		/* Get next BD. */
 		if (bdp->cbd_sc & BD_SC_WRAP)
 			bdp = pinfo->tx_bd_base;
@@ -643,12 +681,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 	mem_addr = pinfo->mem_addr;
 	bdp = pinfo->rx_cur = pinfo->rx_bd_base;
 	for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
-		bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
 		bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
 		mem_addr += pinfo->rx_fifosize;
 	}
-	
-	bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+
+	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
 	bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
 
 	/* Set the physical address of the host memory
@@ -658,12 +696,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 	mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
 	bdp = pinfo->tx_cur = pinfo->tx_bd_base;
 	for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
-		bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
 		bdp->cbd_sc = BD_SC_INTRPT;
 		mem_addr += pinfo->tx_fifosize;
 	}
-	
-	bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+
+	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
 	bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
 }
 
@@ -763,6 +801,8 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 	/* Using idle charater time requires some additional tuning.  */
 	up->smc_mrblr = pinfo->rx_fifosize;
 	up->smc_maxidl = pinfo->rx_fifosize;
+	up->smc_brklen = 0;
+	up->smc_brkec = 0;
 	up->smc_brkcr = 1;
 
 	cpm_line_cr_cmd(line, CPM_CR_INIT_TRX);
@@ -796,7 +836,7 @@ static int cpm_uart_request_port(struct uart_port *port)
 	/*
 	 * Setup any port IO, connect any baud rate generators,
 	 * etc.  This is expected to be handled by board
-	 * dependant code 
+	 * dependant code
 	 */
 	if (pinfo->set_lineif)
 		pinfo->set_lineif(pinfo);
@@ -815,6 +855,10 @@ static int cpm_uart_request_port(struct uart_port *port)
 		return ret;
 
 	cpm_uart_initbd(pinfo);
+	if (IS_SMC(pinfo))
+		cpm_uart_init_smc(pinfo);
+	else
+		cpm_uart_init_scc(pinfo);
 
 	return 0;
 }
@@ -869,7 +913,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		.flags = FLAG_SMC,
 		.tx_nrfifos = TX_NUM_FIFO,
 		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO, 
+		.rx_nrfifos = RX_NUM_FIFO,
 		.rx_fifosize = RX_BUF_SIZE,
 		.set_lineif = smc1_lineif,
 	},
@@ -883,7 +927,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		.flags = FLAG_SMC,
 		.tx_nrfifos = TX_NUM_FIFO,
 		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO, 
+		.rx_nrfifos = RX_NUM_FIFO,
 		.rx_fifosize = RX_BUF_SIZE,
 		.set_lineif = smc2_lineif,
 #ifdef CONFIG_SERIAL_CPM_ALT_SMC2
@@ -899,9 +943,10 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		},
 		.tx_nrfifos = TX_NUM_FIFO,
 		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO, 
+		.rx_nrfifos = RX_NUM_FIFO,
 		.rx_fifosize = RX_BUF_SIZE,
 		.set_lineif = scc1_lineif,
+		.wait_closing = SCC_WAIT_CLOSING,
 	},
 	[UART_SCC2] = {
 		.port = {
@@ -912,9 +957,10 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		},
 		.tx_nrfifos = TX_NUM_FIFO,
 		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO, 
+		.rx_nrfifos = RX_NUM_FIFO,
 		.rx_fifosize = RX_BUF_SIZE,
 		.set_lineif = scc2_lineif,
+		.wait_closing = SCC_WAIT_CLOSING,
 	},
 	[UART_SCC3] = {
 		.port = {
@@ -925,9 +971,10 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		},
 		.tx_nrfifos = TX_NUM_FIFO,
 		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO, 
+		.rx_nrfifos = RX_NUM_FIFO,
 		.rx_fifosize = RX_BUF_SIZE,
 		.set_lineif = scc3_lineif,
+		.wait_closing = SCC_WAIT_CLOSING,
 	},
 	[UART_SCC4] = {
 		.port = {
@@ -938,9 +985,10 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		},
 		.tx_nrfifos = TX_NUM_FIFO,
 		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO, 
+		.rx_nrfifos = RX_NUM_FIFO,
 		.rx_fifosize = RX_BUF_SIZE,
 		.set_lineif = scc4_lineif,
+		.wait_closing = SCC_WAIT_CLOSING,
 	},
 };
 
@@ -983,11 +1031,8 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 		 * If the buffer address is in the CPM DPRAM, don't
 		 * convert it.
 		 */
-		if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR)
-			cp = (unsigned char *) (bdp->cbd_bufaddr);
-		else
-			cp = bus_to_virt(bdp->cbd_bufaddr);
-		
+		cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+
 		*cp = *s;
 
 		bdp->cbd_datlen = 1;
@@ -1003,10 +1048,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 			while ((bdp->cbd_sc & BD_SC_READY) != 0)
 				;
 
-			if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR)
-				cp = (unsigned char *) (bdp->cbd_bufaddr);
-			else
-				cp = bus_to_virt(bdp->cbd_bufaddr);
+			cp = cpm2cpu_addr(bdp->cbd_bufaddr);
 
 			*cp = 13;
 			bdp->cbd_datlen = 1;
@@ -1045,7 +1087,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	port =
 	    (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
 	pinfo = (struct uart_cpm_port *)port;
-	
+
 	pinfo->flags |= FLAG_CONSOLE;
 
 	if (options) {
@@ -1062,7 +1104,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	/*
 	 * Setup any port IO, connect any baud rate generators,
 	 * etc.  This is expected to be handled by board
-	 * dependant code 
+	 * dependant code
 	 */
 	if (pinfo->set_lineif)
 		pinfo->set_lineif(pinfo);
@@ -1092,14 +1134,14 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	return 0;
 }
 
-extern struct uart_driver cpm_reg;
+static struct uart_driver cpm_reg;
 static struct console cpm_scc_uart_console = {
-	.name		"ttyCPM",
-	.write		cpm_uart_console_write,
-	.device		uart_console_device,
-	.setup		cpm_uart_console_setup,
-	.flags		CON_PRINTBUFFER,
-	.index		-1,
+	.name		= "ttyCPM",
+	.write		= cpm_uart_console_write,
+	.device		= uart_console_device,
+	.setup		= cpm_uart_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
 	.data		= &cpm_reg,
 };
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 8efbd6d..4b0786e 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -5,7 +5,7 @@
  *
  *  Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
  *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
- * 
+ *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
  *
@@ -82,6 +82,17 @@ void cpm_line_cr_cmd(int line, int cmd)
 void smc1_lineif(struct uart_cpm_port *pinfo)
 {
 	volatile cpm8xx_t *cp = cpmp;
+
+	(void)cp;	/* fix warning */
+#if defined (CONFIG_MPC885ADS)
+	/* Enable SMC1 transceivers */
+	{
+		cp->cp_pepar |= 0x000000c0;
+		cp->cp_pedir &= ~0x000000c0;
+		cp->cp_peso &= ~0x00000040;
+		cp->cp_peso |= 0x00000080;
+	}
+#elif defined (CONFIG_MPC86XADS)
 	unsigned int iobits = 0x000000c0;
 
 	if (!pinfo->is_portb) {
@@ -93,41 +104,33 @@ void smc1_lineif(struct uart_cpm_port *pinfo)
 		((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
 		((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
 	}
-
-#ifdef CONFIG_MPC885ADS
-	/* Enable SMC1 transceivers */
-	{
-		volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4);
-		uint tmp;
-
-		tmp = in_be32(bcsr1);
-		tmp &= ~BCSR1_RS232EN_1;
-		out_be32(bcsr1, tmp);
-		iounmap(bcsr1);
-	}
 #endif
-
 	pinfo->brg = 1;
 }
 
 void smc2_lineif(struct uart_cpm_port *pinfo)
 {
-#ifdef CONFIG_MPC885ADS
 	volatile cpm8xx_t *cp = cpmp;
-	volatile uint __iomem *bcsr1;
-	uint tmp;
 
+	(void)cp;	/* fix warning */
+#if defined (CONFIG_MPC885ADS)
 	cp->cp_pepar |= 0x00000c00;
 	cp->cp_pedir &= ~0x00000c00;
 	cp->cp_peso &= ~0x00000400;
 	cp->cp_peso |= 0x00000800;
+#elif defined (CONFIG_MPC86XADS)
+	unsigned int iobits = 0x00000c00;
+
+	if (!pinfo->is_portb) {
+		cp->cp_pbpar |= iobits;
+		cp->cp_pbdir &= ~iobits;
+		cp->cp_pbodr &= ~iobits;
+	} else {
+		((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
+		((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
+		((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
+	}
 
-	/* Enable SMC2 transceivers */
-	bcsr1 = ioremap(BCSR1, 4);
-	tmp = in_be32(bcsr1);
-	tmp &= ~BCSR1_RS232EN_2;
-	out_be32(bcsr1, tmp);
-	iounmap(bcsr1);
 #endif
 
 	pinfo->brg = 2;
@@ -158,7 +161,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo)
 }
 
 /*
- * Allocate DP-Ram and memory buffers. We need to allocate a transmit and 
+ * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
  * receive buffer descriptors from dual port ram, and a character
  * buffer area from host mem. If we are allocating for the console we need
  * to do it from bootmem
@@ -185,6 +188,8 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
 	    L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
 	if (is_con) {
+		/* was hostalloc but changed cause it blows away the */
+		/* large tlb mapping when pinning the kernel area    */
 		mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
 		dma_addr = 0;
 	} else
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 50cb018..b01efb6 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -527,7 +527,7 @@ show_periodic (struct class_device *class_dev, char *buf)
 						p.qh->period,
 						le32_to_cpup (&p.qh->hw_info2)
 							/* uframe masks */
-							& 0xffff,
+							& (QH_CMASK | QH_SMASK),
 						p.qh);
 				size -= temp;
 				next += temp;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 4f97a4a..20df01a 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -222,7 +222,7 @@ __acquires(ehci->lock)
 		struct ehci_qh	*qh = (struct ehci_qh *) urb->hcpriv;
 
 		/* S-mask in a QH means it's an interrupt urb */
-		if ((qh->hw_info2 & __constant_cpu_to_le32 (0x00ff)) != 0) {
+		if ((qh->hw_info2 & __constant_cpu_to_le32 (QH_SMASK)) != 0) {
 
 			/* ... update hc-wide periodic stats (for usbfs) */
 			ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
@@ -428,7 +428,8 @@ halt:
 			/* should be rare for periodic transfers,
 			 * except maybe high bandwidth ...
 			 */
-			if (qh->period) {
+			if ((__constant_cpu_to_le32 (QH_SMASK)
+					& qh->hw_info2) != 0) {
 				intr_deschedule (ehci, qh);
 				(void) qh_schedule (ehci, qh);
 			} else
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 9af4f64..b56f258 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -301,7 +301,7 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 	dev_dbg (&qh->dev->dev,
 		"link qh%d-%04x/%p start %d [%d/%d us]\n",
-		period, le32_to_cpup (&qh->hw_info2) & 0xffff,
+		period, le32_to_cpup (&qh->hw_info2) & (QH_CMASK | QH_SMASK),
 		qh, qh->start, qh->usecs, qh->c_usecs);
 
 	/* high bandwidth, or otherwise every microframe */
@@ -385,7 +385,8 @@ static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 	dev_dbg (&qh->dev->dev,
 		"unlink qh%d-%04x/%p start %d [%d/%d us]\n",
-		qh->period, le32_to_cpup (&qh->hw_info2) & 0xffff,
+		qh->period,
+		le32_to_cpup (&qh->hw_info2) & (QH_CMASK | QH_SMASK),
 		qh, qh->start, qh->usecs, qh->c_usecs);
 
 	/* qh->qh_next still "live" to HC */
@@ -411,7 +412,7 @@ static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	 * active high speed queues may need bigger delays...
 	 */
 	if (list_empty (&qh->qtd_list)
-			|| (__constant_cpu_to_le32 (0x0ff << 8)
+			|| (__constant_cpu_to_le32 (QH_CMASK)
 					& qh->hw_info2) != 0)
 		wait = 2;
 	else
@@ -533,7 +534,7 @@ static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 	/* reuse the previous schedule slots, if we can */
 	if (frame < qh->period) {
-		uframe = ffs (le32_to_cpup (&qh->hw_info2) & 0x00ff);
+		uframe = ffs (le32_to_cpup (&qh->hw_info2) & QH_SMASK);
 		status = check_intr_schedule (ehci, frame, --uframe,
 				qh, &c_mask);
 	} else {
@@ -569,10 +570,10 @@ static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		qh->start = frame;
 
 		/* reset S-frame and (maybe) C-frame masks */
-		qh->hw_info2 &= __constant_cpu_to_le32 (~0xffff);
+		qh->hw_info2 &= __constant_cpu_to_le32(~(QH_CMASK | QH_SMASK));
 		qh->hw_info2 |= qh->period
 			? cpu_to_le32 (1 << uframe)
-			: __constant_cpu_to_le32 (0xff);
+			: __constant_cpu_to_le32 (QH_SMASK);
 		qh->hw_info2 |= c_mask;
 	} else
 		ehci_dbg (ehci, "reused qh %p schedule\n", qh);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 4df4982..a754215 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -385,6 +385,11 @@ struct ehci_qh {
 	__le32			hw_info1;        /* see EHCI 3.6.2 */
 #define	QH_HEAD		0x00008000
 	__le32			hw_info2;        /* see EHCI 3.6.2 */
+#define	QH_SMASK	0x000000ff
+#define	QH_CMASK	0x0000ff00
+#define	QH_HUBADDR	0x007f0000
+#define	QH_HUBPORT	0x3f800000
+#define	QH_MULT		0xc0000000
 	__le32			hw_current;	 /* qtd list - see EHCI 3.6.4 */
 	
 	/* qtd overlay (hardware parts of a struct ehci_qtd) */
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 50b1970..76cb496 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -229,9 +229,11 @@ static void preproc_atl_queue(struct isp116x *isp116x)
 	struct isp116x_ep *ep;
 	struct urb *urb;
 	struct ptd *ptd;
-	u16 toggle = 0, dir = PTD_DIR_SETUP, len;
+	u16 len;
 
 	for (ep = isp116x->atl_active; ep; ep = ep->active) {
+		u16 toggle = 0, dir = PTD_DIR_SETUP;
+
 		BUG_ON(list_empty(&ep->hep->urb_list));
 		urb = container_of(ep->hep->urb_list.next,
 				   struct urb, urb_list);
diff --git a/drivers/usb/mon/Kconfig b/drivers/usb/mon/Kconfig
index 777642e..deb9ddf 100644
--- a/drivers/usb/mon/Kconfig
+++ b/drivers/usb/mon/Kconfig
@@ -9,9 +9,8 @@ config USB_MON
 	help
 	  If you say Y here, a component which captures the USB traffic
 	  between peripheral-specific drivers and HC drivers will be built.
-	  The USB_MON is similar in spirit and may be compatible with Dave
-	  Harding's USBMon.
+	  For more information, see <file:Documentation/usb/usbmon.txt>.
 
-	  This is somewhat experimental at this time, but it should be safe,
-	  as long as you aren't using modular USB and try to remove this
-	  module.
+	  This is somewhat experimental at this time, but it should be safe.
+
+	  If unsure, say Y.
diff --git a/drivers/usb/mon/Makefile b/drivers/usb/mon/Makefile
index f18d10c..b0015b8 100644
--- a/drivers/usb/mon/Makefile
+++ b/drivers/usb/mon/Makefile
@@ -4,4 +4,5 @@
 
 usbmon-objs	:= mon_main.o mon_stat.o mon_text.o
 
+# This does not use CONFIG_USB_MON because we want this to use a tristate.
 obj-$(CONFIG_USB)	+= usbmon.o
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index ed1d4d1..1147b89 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -414,6 +414,13 @@ static ssize_t show_pan(struct class_device *class_device, char *buf)
 			fb_info->var.xoffset);
 }
 
+static ssize_t show_name(struct class_device *class_device, char *buf)
+{
+	struct fb_info *fb_info = (struct fb_info *)class_get_devdata(class_device);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", fb_info->fix.id);
+}
+
 static struct class_device_attribute class_device_attrs[] = {
 	__ATTR(bits_per_pixel, S_IRUGO|S_IWUSR, show_bpp, store_bpp),
 	__ATTR(blank, S_IRUGO|S_IWUSR, show_blank, store_blank),
@@ -424,6 +431,7 @@ static struct class_device_attribute class_device_attrs[] = {
 	__ATTR(modes, S_IRUGO|S_IWUSR, show_modes, store_modes),
 	__ATTR(pan, S_IRUGO|S_IWUSR, show_pan, store_pan),
 	__ATTR(virtual_size, S_IRUGO|S_IWUSR, show_virtual, store_virtual),
+	__ATTR(name, S_IRUGO, show_name, NULL),
 };
 
 int fb_init_class_device(struct fb_info *fb_info)
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index fbf659b..3edc9f4 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -246,6 +246,11 @@ static const struct fb_videomode modedb[] = {
 	/* 480x300 @ 72 Hz, 48.0 kHz hsync */
 	NULL, 72, 480, 300, 33386, 40, 24, 11, 19, 80, 3,
 	0, FB_VMODE_DOUBLE
+    }, {
+	/* 1920x1200 @ 60 Hz, 74.5 Khz hsync */
+	NULL, 60, 1920, 1200, 5177, 128, 336, 1, 38, 208, 3,
+	FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	FB_VMODE_NONINTERLACED
     },
 };
 
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
index b2e6b24..52b1685 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -1324,6 +1324,13 @@ static int __devinit nvidia_set_fbinfo(struct fb_info *info)
 
 		fb_videomode_to_var(&nvidiafb_default_var, &modedb);
 		nvidiafb_default_var.bits_per_pixel = 8;
+	} else if (par->fpWidth && par->fpHeight) {
+		char buf[16];
+
+		memset(buf, 0, 16);
+		snprintf(buf, 15, "%dx%d", par->fpWidth, par->fpHeight);
+		fb_find_mode(&nvidiafb_default_var, info, buf, specs->modedb,
+			     specs->modedb_len, &modedb, 8);
 	}
 
 	if (mode_option)
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 16e37a5..3011281 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -717,6 +717,9 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
 	DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
 	DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
 
+	/* enable LCD controller clock */
+	pxa_set_cken(CKEN16_LCD, 1);
+
 	/* Sequence from 11.7.10 */
 	LCCR3 = fbi->reg_lccr3;
 	LCCR2 = fbi->reg_lccr2;
@@ -750,6 +753,9 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
 
 	schedule_timeout(20 * HZ / 1000);
 	remove_wait_queue(&fbi->ctrlr_wait, &wait);
+
+	/* disable LCD controller clock */
+	pxa_set_cken(CKEN16_LCD, 0);
 }
 
 /*
@@ -1299,8 +1305,6 @@ int __init pxafb_probe(struct device *dev)
 		ret = -ENOMEM;
 		goto failed;
 	}
-	/* enable LCD controller clock */
-	pxa_set_cken(CKEN16_LCD, 1);
 
 	ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi);
 	if (ret) {
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 2d29db7..beeec7b 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -598,7 +598,7 @@ sa1100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
  *    requests for the LCD controller.  If we hit this, it means we're
  *    doing nothing but LCD DMA.
  */
-static unsigned int sa1100fb_display_dma_period(struct fb_var_screeninfo *var)
+static inline unsigned int sa1100fb_display_dma_period(struct fb_var_screeninfo *var)
 {
 	/*
 	 * Period = pixclock * bits_per_byte * bytes_per_transfer
diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index da8004e..698ca92 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -454,13 +454,16 @@ static struct accel_switch accel_image = {
 static void tridentfb_fillrect(struct fb_info * info, const struct fb_fillrect *fr)
 {
 	int bpp = info->var.bits_per_pixel;
-	int col;
+	int col = 0;
 	
 	switch (bpp) {
 		default:
-		case 8: col = fr->color;
+		case 8: col |= fr->color;
+			col |= col << 8;
+			col |= col << 16;
 			break;
 		case 16: col = ((u32 *)(info->pseudo_palette))[fr->color];
+			
 			 break;
 		case 32: col = ((u32 *)(info->pseudo_palette))[fr->color];
 			 break;
@@ -882,8 +885,9 @@ static int tridentfb_set_par(struct fb_info *info)
 
 	write3X4(GraphEngReg, 0x80);	//enable GE for text acceleration
 
-//	if (info->var.accel_flags & FB_ACCELF_TEXT)
-//FIXME		acc->init_accel(info->var.xres,bpp);
+#ifdef CONFIG_FB_TRIDENT_ACCEL	
+	acc->init_accel(info->var.xres,bpp);
+#endif
 	
 	switch (bpp) {
 		case 8:  tmp = 0x00; break;
@@ -900,7 +904,7 @@ static int tridentfb_set_par(struct fb_info *info)
 	write3X4(DRAMControl, tmp);	//both IO,linear enable
 
 	write3X4(InterfaceSel, read3X4(InterfaceSel) | 0x40);
-	write3X4(Performance,0x20);
+	write3X4(Performance,0x92);
 	write3X4(PCIReg,0x07);		//MMIO & PCI read and write burst enable
 
 	/* convert from picoseconds to MHz */
@@ -981,12 +985,14 @@ static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 		t_outb(green>>10,0x3C9);
 		t_outb(blue>>10,0x3C9);
 
-	} else
-	if (bpp == 16) 			/* RGB 565 */
-			((u32*)info->pseudo_palette)[regno] = (red & 0xF800) |
-			((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
-	else
-	if (bpp == 32)		/* ARGB 8888 */
+	} else if (bpp == 16) {	/* RGB 565 */
+		u32 col;
+
+		col = (red & 0xF800) | ((green & 0xFC00) >> 5) |
+			((blue & 0xF800) >> 11);
+		col |= col << 16;	
+		((u32 *)(info->pseudo_palette))[regno] = col;
+	} else if (bpp == 32)		/* ARGB 8888 */
 		((u32*)info->pseudo_palette)[regno] =
 			((transp & 0xFF00) <<16) 	|
 			((red & 0xFF00) << 8) 		|
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 8a9c428..0bbf029 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -593,7 +593,7 @@ void w1_search(struct w1_master *dev, w1_slave_found_callback cb)
 		 * Return 0 - device(s) present, 1 - no devices present.
 		 */
 		if (w1_reset_bus(dev)) {
-			dev_info(&dev->dev, "No devices present on the wire.\n");
+			dev_dbg(&dev->dev, "No devices present on the wire.\n");
 			break;
 		}