summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-03-17 21:57:41 +0100
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-03-17 21:57:41 +0100
commit120b9cfddff2e398fece07c5e127f3fdbb660441 (patch)
tree25b493c4674a823069cac0f4b808b917439ea1df /drivers
parent6f5050a96c9e0521f42a3a1d676c7ad9815f62ad (diff)
downloadop-kernel-dev-120b9cfddff2e398fece07c5e127f3fdbb660441.zip
op-kernel-dev-120b9cfddff2e398fece07c5e127f3fdbb660441.tar.gz
ide: remove CONFIG_IDEDMA_{ICS,PCI}_AUTO config options
All modern distributions have been setting these options to "y" for ages. (additionally "n" cases have been obsoleted for few years). Therefore use DMA by default and remove CONFIG_IDEDMA_{ICS,PCI}_AUTO (also remove no longer needed CONFIG_IDEDMA_AUTO). This fixes DMA support for rare configurations where CONFIG_IDEDMA_{ICS,PCI}_AUTO was set to "n" but "hdparm -d 1" was used to enable DMA support and which were forced to PIO mode by "ide: don't allow DMA to be enabled if CONFIG_IDEDMA_{ICS,PCI}_AUTO=n" patch. There is no functionality loss because "ide=nodma" kernel option is still available. Cc: Patrick Horn <phrh@yahoo.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/Kconfig32
-rw-r--r--drivers/ide/arm/icside.c13
-rw-r--r--drivers/ide/ide.c4
-rw-r--r--drivers/ide/setup-pci.c5
4 files changed, 1 insertions, 53 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 98a1ff2..8f1fd01 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -434,24 +434,8 @@ config BLK_DEV_IDEDMA_FORCED
Generally say N here.
-config IDEDMA_PCI_AUTO
- bool "Use PCI DMA by default when available"
- ---help---
- Prior to kernel version 2.1.112, Linux used to automatically use
- DMA for IDE drives and chipsets which support it. Due to concerns
- about a couple of cases where buggy hardware may have caused damage,
- the default is now to NOT use DMA automatically. To revert to the
- previous behaviour, say Y to this question.
-
- If you suspect your hardware is at all flakey, say N here.
- Do NOT email the IDE kernel people regarding this issue!
-
- It is normally safe to answer Y to this question unless your
- motherboard uses a VIA VP2 chipset, in which case you should say N.
-
config IDEDMA_ONLYDISK
bool "Enable DMA only for disks "
- depends on IDEDMA_PCI_AUTO
help
This is used if you know your ATAPI Devices are going to fail DMA
Transfers.
@@ -851,19 +835,6 @@ config BLK_DEV_IDEDMA_ICS
Say Y here if you want to add DMA (Direct Memory Access) support to
the ICS IDE driver.
-config IDEDMA_ICS_AUTO
- bool "Use ICS DMA by default"
- depends on BLK_DEV_IDEDMA_ICS
- help
- Prior to kernel version 2.1.112, Linux used to automatically use
- DMA for IDE drives and chipsets which support it. Due to concerns
- about a couple of cases where buggy hardware may have caused damage,
- the default is now to NOT use DMA automatically. To revert to the
- previous behaviour, say Y to this question.
-
- If you suspect your hardware is at all flakey, say N here.
- Do NOT email the IDE kernel people regarding this issue!
-
config BLK_DEV_IDE_RAPIDE
tristate "RapIDE interface support"
depends on ARM && ARCH_ACORN
@@ -1086,9 +1057,6 @@ config IDEDMA_IVB
It is normally safe to answer Y; however, the default is N.
-config IDEDMA_AUTO
- def_bool IDEDMA_PCI_AUTO || IDEDMA_ICS_AUTO
-
endif
config BLK_DEV_HD_ONLY
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 40e5c66..e2953fc 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -196,11 +196,6 @@ static void icside_maskproc(ide_drive_t *drive, int mask)
}
#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
-
-#ifndef CONFIG_IDEDMA_ICS_AUTO
-#warning CONFIG_IDEDMA_ICS_AUTO=n support is obsolete, and will be removed soon.
-#endif
-
/*
* SG-DMA support.
*
@@ -474,12 +469,6 @@ static int icside_dma_lostirq(ide_drive_t *drive)
static void icside_dma_init(ide_hwif_t *hwif)
{
- int autodma = 0;
-
-#ifdef CONFIG_IDEDMA_ICS_AUTO
- autodma = 1;
-#endif
-
printk(" %s: SG-DMA", hwif->name);
hwif->atapi_dma = 1;
@@ -489,7 +478,7 @@ static void icside_dma_init(ide_hwif_t *hwif)
hwif->dmatable_cpu = NULL;
hwif->dmatable_dma = 0;
hwif->speedproc = icside_set_speed;
- hwif->autodma = autodma;
+ hwif->autodma = 1;
hwif->ide_dma_check = icside_dma_check;
hwif->dma_host_off = icside_dma_host_off;
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index dfbd744..695610f 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -177,11 +177,7 @@ DECLARE_MUTEX(ide_cfg_sem);
static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
#endif
-#ifdef CONFIG_IDEDMA_AUTO
int noautodma = 0;
-#else
-int noautodma = 1;
-#endif
EXPORT_SYMBOL(noautodma);
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index a52c80f..118fb32 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -505,11 +505,6 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwi
}
}
}
-
-#ifndef CONFIG_IDEDMA_PCI_AUTO
-#warning CONFIG_IDEDMA_PCI_AUTO=n support is obsolete, and will be removed soon.
-#endif
-
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI*/
/**
OpenPOWER on IntegriCloud