diff options
author | Kevin Lo <kevlo@kevlo.org> | 2007-11-23 09:31:52 +0800 |
---|---|---|
committer | Mark M. Hoffman <mhoffman@lightlink.com> | 2008-02-07 20:39:40 -0500 |
commit | 85f03bccd6e0e2ac6ccf017d4bcd5d74bb87a671 (patch) | |
tree | 2e71c1f5edbbb9e78237da39f208514656c873a1 /drivers | |
parent | ce9c2f449b9e6b68d3a71ba146d64c44c8945d8d (diff) | |
download | op-kernel-dev-85f03bccd6e0e2ac6ccf017d4bcd5d74bb87a671.zip op-kernel-dev-85f03bccd6e0e2ac6ccf017d4bcd5d74bb87a671.tar.gz |
hwmon: Add support for Winbond W83L786NG/NR
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
-rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
-rw-r--r-- | drivers/hwmon/w83l786ng.c | 821 |
3 files changed, 832 insertions, 0 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index a0445be..a2187df5 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -683,6 +683,16 @@ config SENSORS_W83L785TS This driver can also be built as a module. If so, the module will be called w83l785ts. +config SENSORS_W83L786NG + tristate "Winbond W83L786NG, W83L786NR" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Winbond W83L786NG + and W83L786NR sensor chips. + + This driver can also be built as a module. If so, the module + will be called w83l786ng. + config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" select HWMON_VID diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 55595f6..77a3e09 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o +obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c new file mode 100644 index 0000000..1dbee4f --- /dev/null +++ b/drivers/hwmon/w83l786ng.c @@ -0,0 +1,821 @@ +/* + w83l786ng.c - Linux kernel driver for hardware monitoring + Copyright (c) 2007 Kevin Lo <kevlo@kevlo.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation - version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301 USA. +*/ + +/* + Supports following chips: + + Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + w83l786ng 3 2 2 2 0x7b 0x5ca3 yes no +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-vid.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(w83l786ng); + +static int reset; +module_param(reset, bool, 0); +MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); + +#define W83L786NG_REG_IN_MIN(nr) (0x2C + (nr) * 2) +#define W83L786NG_REG_IN_MAX(nr) (0x2B + (nr) * 2) +#define W83L786NG_REG_IN(nr) ((nr) + 0x20) + +#define W83L786NG_REG_FAN(nr) ((nr) + 0x28) +#define W83L786NG_REG_FAN_MIN(nr) ((nr) + 0x3B) + +#define W83L786NG_REG_CONFIG 0x40 +#define W83L786NG_REG_ALARM1 0x41 +#define W83L786NG_REG_ALARM2 0x42 +#define W83L786NG_REG_GPIO_EN 0x47 +#define W83L786NG_REG_MAN_ID2 0x4C +#define W83L786NG_REG_MAN_ID1 0x4D +#define W83L786NG_REG_CHIP_ID 0x4E + +#define W83L786NG_REG_DIODE 0x53 +#define W83L786NG_REG_FAN_DIV 0x54 +#define W83L786NG_REG_FAN_CFG 0x80 + +#define W83L786NG_REG_TOLERANCE 0x8D + +static const u8 W83L786NG_REG_TEMP[2][3] = { + { 0x25, /* TEMP 0 in DataSheet */ + 0x35, /* TEMP 0 Over in DataSheet */ + 0x36 }, /* TEMP 0 Hyst in DataSheet */ + { 0x26, /* TEMP 1 in DataSheet */ + 0x37, /* TEMP 1 Over in DataSheet */ + 0x38 } /* TEMP 1 Hyst in DataSheet */ +}; + +static const u8 W83L786NG_PWM_MODE_SHIFT[] = {6, 7}; +static const u8 W83L786NG_PWM_ENABLE_SHIFT[] = {2, 4}; + +/* FAN Duty Cycle, be used to control */ +static const u8 W83L786NG_REG_PWM[] = {0x81, 0x87}; + + +static inline u8 +FAN_TO_REG(long rpm, int div) +{ + if (rpm == 0) + return 255; + rpm = SENSORS_LIMIT(rpm, 1, 1000000); + return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); +} + +#define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \ + ((val) == 255 ? 0 : \ + 1350000 / ((val) * (div)))) + +/* for temp */ +#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \ + : (val)) / 1000, 0, 0xff)) +#define TEMP_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000) + +/* The analog voltage inputs have 8mV LSB. Since the sysfs output is + in mV as would be measured on the chip input pin, need to just + multiply/divide by 8 to translate from/to register values. */ +#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 4) / 8), 0, 255)) +#define IN_FROM_REG(val) ((val) * 8) + +#define DIV_FROM_REG(val) (1 << (val)) + +static inline u8 +DIV_TO_REG(long val) +{ + int i; + val = SENSORS_LIMIT(val, 1, 128) >> 1; + for (i = 0; i < 7; i++) { + if (val == 0) + break; + val >>= 1; + } + return ((u8) i); +} + +struct w83l786ng_data { + struct i2c_client client; + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + unsigned long last_nonvolatile; /* In jiffies, last time we update the + nonvolatile registers */ + + u8 in[3]; + u8 in_max[3]; + u8 in_min[3]; + u8 fan[2]; + u8 fan_div[2]; + u8 fan_min[2]; + u8 temp_type[2]; + u8 temp[2][3]; + u8 pwm[2]; + u8 pwm_mode[2]; /* 0->DC variable voltage + 1->PWM variable duty cycle */ + + u8 pwm_enable[2]; /* 1->manual + 2->thermal cruise (also called SmartFan I) */ + u8 tolerance[2]; +}; + +static int w83l786ng_attach_adapter(struct i2c_adapter *adapter); +static int w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind); +static int w83l786ng_detach_client(struct i2c_client *client); +static void w83l786ng_init_client(struct i2c_client *client); +static struct w83l786ng_data *w83l786ng_update_device(struct device *dev); + +static struct i2c_driver w83l786ng_driver = { + .driver = { + .name = "w83l786ng", + }, + .attach_adapter = w83l786ng_attach_adapter, + .detach_client = w83l786ng_detach_client, +}; + +static u8 +w83l786ng_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int +w83l786ng_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* following are the sysfs callback functions */ +#define show_in_reg(reg) \ +static ssize_t \ +show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + int nr = to_sensor_dev_attr(attr)->index; \ + struct w83l786ng_data *data = w83l786ng_update_device(dev); \ + return sprintf(buf,"%d\n", IN_FROM_REG(data->reg[nr])); \ +} + +show_in_reg(in) +show_in_reg(in_min) +show_in_reg(in_max) + +#define store_in_reg(REG, reg) \ +static ssize_t \ +store_in_##reg (struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + int nr = to_sensor_dev_attr(attr)->index; \ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83l786ng_data *data = i2c_get_clientdata(client); \ + unsigned long val = simple_strtoul(buf, NULL, 10); \ + mutex_lock(&data->update_lock); \ + data->in_##reg[nr] = IN_TO_REG(val); \ + w83l786ng_write_value(client, W83L786NG_REG_IN_##REG(nr), \ + data->in_##reg[nr]); \ + mutex_unlock(&data->update_lock); \ + return count; \ +} + +store_in_reg(MIN, min) +store_in_reg(MAX, max) + +static struct sensor_device_attribute sda_in_input[] = { + SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), + SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), + SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), +}; + +static struct sensor_device_attribute sda_in_min[] = { + SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0), + SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1), + SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2), +}; + +static struct sensor_device_attribute sda_in_max[] = { + SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0), + SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1), + SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2), +}; + +#define show_fan_reg(reg) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + int nr = to_sensor_dev_attr(attr)->index; \ + struct w83l786ng_data *data = w83l786ng_update_device(dev); \ + return sprintf(buf,"%d\n", \ + FAN_FROM_REG(data->fan[nr], DIV_FROM_REG(data->fan_div[nr]))); \ +} + +show_fan_reg(fan); +show_fan_reg(fan_min); + +static ssize_t +store_fan_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83l786ng_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + mutex_lock(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); + w83l786ng_write_value(client, W83L786NG_REG_FAN_MIN(nr), + data->fan_min[nr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t +show_fan_div(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct w83l786ng_data *data = w83l786ng_update_device(dev); + return sprintf(buf, "%u\n", DIV_FROM_REG(data->fan_div[nr])); +} + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan divisor. This follows the principle of + least surprise; the user doesn't expect the fan minimum to change just + because the divisor changed. */ +static ssize_t +store_fan_div(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83l786ng_data *data = i2c_get_clientdata(client); + + unsigned long min; + u8 tmp_fan_div; + u8 fan_div_reg; + u8 keep_mask = 0; + u8 new_shift = 0; + + /* Save fan_min */ + mutex_lock(&data->update_lock); + min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); + + data->fan_div[nr] = DIV_TO_REG(simple_strtoul(buf, NULL, 10)); + + switch (nr) { + case 0: + keep_mask = 0xf8; + new_shift = 0; + break; + case 1: + keep_mask = 0x8f; + new_shift = 4; + break; + } + + fan_div_reg = w83l786ng_read_value(client, W83L786NG_REG_FAN_DIV) + & keep_mask; + + tmp_fan_div = (data->fan_div[nr] << new_shift) & ~keep_mask; + + w83l786ng_write_value(client, W83L786NG_REG_FAN_DIV, + fan_div_reg | tmp_fan_div); + + /* Restore fan_min */ + data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); + w83l786ng_write_value(client, W83L786NG_REG_FAN_MIN(nr), + data->fan_min[nr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static struct sensor_device_attribute sda_fan_input[] = { + SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0), + SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1), +}; + +static struct sensor_device_attribute sda_fan_min[] = { + SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, + store_fan_min, 0), + SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, + store_fan_min, 1), +}; + +static struct sensor_device_attribute sda_fan_div[] = { + SENSOR_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div, + store_fan_div, 0), + SENSOR_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div, + store_fan_div, 1), +}; + + +/* read/write the temperature, includes measured value and limits */ + +static ssize_t +show_temp(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + struct w83l786ng_data *data = w83l786ng_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr][index])); +} + +static ssize_t +store_temp(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83l786ng_data *data = i2c_get_clientdata(client); + s32 val; + + val = simple_strtol(buf, NULL, 10); + mutex_lock(&data->update_lock); + data->temp[nr][index] = TEMP_TO_REG(val); + w83l786ng_write_value(client, W83L786NG_REG_TEMP[nr][index], + data->temp[nr][index]); + mutex_unlock(&data->update_lock); + + return count; +} + +static struct sensor_device_attribute_2 sda_temp_input[] = { + SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0), + SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, 0), +}; + +static struct sensor_device_attribute_2 sda_temp_max[] = { + SENSOR_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, + show_temp, store_temp, 0, 1), + SENSOR_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, + show_temp, store_temp, 1, 1), +}; + +static struct sensor_device_attribute_2 sda_temp_max_hyst[] = { + SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR, + show_temp, store_temp, 0, 2), + SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR, + show_temp, store_temp, 1, 2), +}; + +#define show_pwm_reg(reg) \ +static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83l786ng_data *data = w83l786ng_update_device(dev); \ + int nr = to_sensor_dev_attr(attr)->index; \ + return sprintf(buf, "%d\n", data->reg[nr]); \ +} + +show_pwm_reg(pwm_mode) +show_pwm_reg(pwm_enable) +show_pwm_reg(pwm) + +static ssize_t +store_pwm_mode(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83l786ng_data *data = i2c_get_clientdata(client); + u32 val = simple_strtoul(buf, NULL, 10); + u8 reg; + + if (val > 1) + return -EINVAL; + mutex_lock(&data->update_lock); + data->pwm_mode[nr] = val; + reg = w83l786ng_read_value(client, W83L786NG_REG_FAN_CFG); + reg &= ~(1 << W83L786NG_PWM_MODE_SHIFT[nr]); + if (!val) + reg |= 1 << W83L786NG_PWM_MODE_SHIFT[nr]; + w83l786ng_write_value(client, W83L786NG_REG_FAN_CFG, reg); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +store_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83l786ng_data *data = i2c_get_clientdata(client); + u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255); + + mutex_lock(&data->update_lock); + data->pwm[nr] = val; + w83l786ng_write_value(client, W83L786NG_REG_PWM[nr], val); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +store_pwm_enable(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83l786ng_data *data = i2c_get_clientdata(client); + u32 val = simple_strtoul(buf, NULL, 10); + + u8 reg; + + if (!val || (val > 2)) /* only modes 1 and 2 are supported */ + return -EINVAL; + + mutex_lock(&data->update_lock); + reg = w83l786ng_read_value(client, W83L786NG_REG_FAN_CFG); + data->pwm_enable[nr] = val; + reg &= ~(0x02 << W83L786NG_PWM_ENABLE_SHIFT[nr]); + reg |= (val - 1) << W83L786NG_PWM_ENABLE_SHIFT[nr]; + w83l786ng_write_value(client, W83L786NG_REG_FAN_CFG, reg); + mutex_unlock(&data->update_lock); + return count; +} + +static struct sensor_device_attribute sda_pwm[] = { + SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0), + SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1), +}; + +static struct sensor_device_attribute sda_pwm_mode[] = { + SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, show_pwm_mode, + store_pwm_mode, 0), + SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, show_pwm_mode, + store_pwm_mode, 1), +}; + +static struct sensor_device_attribute sda_pwm_enable[] = { + SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + store_pwm_enable, 0), + SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + store_pwm_enable, 1), +}; + +/* For Smart Fan I/Thermal Cruise and Smart Fan II */ +static ssize_t +show_tolerance(struct device *dev, struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct w83l786ng_data *data = w83l786ng_update_device(dev); + return sprintf(buf, "%ld\n", (long)data->tolerance[nr]); +} + +static ssize_t +store_tolerance(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83l786ng_data *data = i2c_get_clientdata(client); + u32 val; + u8 tol_tmp, tol_mask; + + val = simple_strtoul(buf, NULL, 10); + + mutex_lock(&data->update_lock); + tol_mask = w83l786ng_read_value(client, + W83L786NG_REG_TOLERANCE) & ((nr == 1) ? 0x0f : 0xf0); + tol_tmp = SENSORS_LIMIT(val, 0, 15); + tol_tmp &= 0x0f; + data->tolerance[nr] = tol_tmp; + if (nr == 1) { + tol_tmp <<= 4; + } + + w83l786ng_write_value(client, W83L786NG_REG_TOLERANCE, + tol_mask | tol_tmp); + mutex_unlock(&data->update_lock); + return count; +} + +static struct sensor_device_attribute sda_tolerance[] = { + SENSOR_ATTR(pwm1_tolerance, S_IWUSR | S_IRUGO, + show_tolerance, store_tolerance, 0), + SENSOR_ATTR(pwm2_tolerance, S_IWUSR | S_IRUGO, + show_tolerance, store_tolerance, 1), +}; + + +#define IN_UNIT_ATTRS(X) \ + &sda_in_input[X].dev_attr.attr, \ + &sda_in_min[X].dev_attr.attr, \ + &sda_in_max[X].dev_attr.attr + +#define FAN_UNIT_ATTRS(X) \ + &sda_fan_input[X].dev_attr.attr, \ + &sda_fan_min[X].dev_attr.attr, \ + &sda_fan_div[X].dev_attr.attr + +#define TEMP_UNIT_ATTRS(X) \ + &sda_temp_input[X].dev_attr.attr, \ + &sda_temp_max[X].dev_attr.attr, \ + &sda_temp_max_hyst[X].dev_attr.attr + +#define PWM_UNIT_ATTRS(X) \ + &sda_pwm[X].dev_attr.attr, \ + &sda_pwm_mode[X].dev_attr.attr, \ + &sda_pwm_enable[X].dev_attr.attr + +#define TOLERANCE_UNIT_ATTRS(X) \ + &sda_tolerance[X].dev_attr.attr + +static struct attribute *w83l786ng_attributes[] = { + IN_UNIT_ATTRS(0), + IN_UNIT_ATTRS(1), + IN_UNIT_ATTRS(2), + FAN_UNIT_ATTRS(0), + FAN_UNIT_ATTRS(1), + TEMP_UNIT_ATTRS(0), + TEMP_UNIT_ATTRS(1), + PWM_UNIT_ATTRS(0), + PWM_UNIT_ATTRS(1), + TOLERANCE_UNIT_ATTRS(0), + TOLERANCE_UNIT_ATTRS(1), + NULL +}; + +static const struct attribute_group w83l786ng_group = { + .attrs = w83l786ng_attributes, +}; + +static int +w83l786ng_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_probe(adapter, &addr_data, w83l786ng_detect); +} + +static int +w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct device *dev; + struct w83l786ng_data *data; + int i, err = 0; + u8 reg_tmp; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + goto exit; + } + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access w83l786ng_{read,write}_value. */ + + if (!(data = kzalloc(sizeof(struct w83l786ng_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + client = &data->client; + dev = &client->dev; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &w83l786ng_driver; + + /* + * Now we do the remaining detection. A negative kind means that + * the driver was loaded with no force parameter (default), so we + * must both detect and identify the chip (actually there is only + * one possible kind of chip for now, W83L786NG). A zero kind means + * that the driver was loaded with the force parameter, the detection + * step shall be skipped. A positive kind means that the driver + * was loaded with the force parameter and a given kind of chip is + * requested, so both the detection and the identification steps + * are skipped. + */ + if (kind < 0) { /* detection */ + if (((w83l786ng_read_value(client, + W83L786NG_REG_CONFIG) & 0x80) != 0x00)) { + dev_dbg(&adapter->dev, + "W83L786NG detection failed at 0x%02x.\n", + address); + goto exit_free; + } + } + + if (kind <= 0) { /* identification */ + u16 man_id; + u8 chip_id; + + man_id = (w83l786ng_read_value(client, + W83L786NG_REG_MAN_ID1) << 8) + + w83l786ng_read_value(client, W83L786NG_REG_MAN_ID2); + chip_id = w83l786ng_read_value(client, W83L786NG_REG_CHIP_ID); + + if (man_id == 0x5CA3) { /* Winbond */ + if (chip_id == 0x80) { /* W83L786NG */ + kind = w83l786ng; + } + } + + if (kind <= 0) { /* identification failed */ + dev_info(&adapter->dev, + "Unsupported chip (man_id=0x%04X, " + "chip_id=0x%02X).\n", man_id, chip_id); + goto exit_free; + } + } + + /* Fill in the remaining client fields and put into the global list */ + strlcpy(client->name, "w83l786ng", I2C_NAME_SIZE); + mutex_init(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(client))) + goto exit_free; + + /* Initialize the chip */ + w83l786ng_init_client(client); + + /* A few vars need to be filled upon startup */ + for (i = 0; i < 2; i++) { + data->fan_min[i] = w83l786ng_read_value(client, + W83L786NG_REG_FAN_MIN(i)); + } + + /* Update the fan divisor */ + reg_tmp = w83l786ng_read_value(client, W83L786NG_REG_FAN_DIV); + data->fan_div[0] = reg_tmp & 0x07; + data->fan_div[1] = (reg_tmp >> 4) & 0x07; + + /* Register sysfs hooks */ + if ((err = sysfs_create_group(&client->dev.kobj, &w83l786ng_group))) + goto exit_remove; + + data->hwmon_dev = hwmon_device_register(dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + + /* Unregister sysfs hooks */ + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &w83l786ng_group); + i2c_detach_client(client); +exit_free: + kfree(data); +exit: + return err; +} + +static int +w83l786ng_detach_client(struct i2c_client *client) +{ + struct w83l786ng_data *data = i2c_get_clientdata(client); + int err; + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &w83l786ng_group); + + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); + + return 0; +} + +static void +w83l786ng_init_client(struct i2c_client *client) +{ + u8 tmp; + + if (reset) + w83l786ng_write_value(client, W83L786NG_REG_CONFIG, 0x80); + + /* Start monitoring */ + tmp = w83l786ng_read_value(client, W83L786NG_REG_CONFIG); + if (!(tmp & 0x01)) + w83l786ng_write_value(client, W83L786NG_REG_CONFIG, tmp | 0x01); +} + +static struct w83l786ng_data *w83l786ng_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83l786ng_data *data = i2c_get_clientdata(client); + int i, j; + u8 reg_tmp, pwmcfg; + + mutex_lock(&data->update_lock); + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + dev_dbg(&client->dev, "Updating w83l786ng data.\n"); + + /* Update the voltages measured value and limits */ + for (i = 0; i < 3; i++) { + data->in[i] = w83l786ng_read_value(client, + W83L786NG_REG_IN(i)); + data->in_min[i] = w83l786ng_read_value(client, + W83L786NG_REG_IN_MIN(i)); + data->in_max[i] = w83l786ng_read_value(client, + W83L786NG_REG_IN_MAX(i)); + } + + /* Update the fan counts and limits */ + for (i = 0; i < 2; i++) { + data->fan[i] = w83l786ng_read_value(client, + W83L786NG_REG_FAN(i)); + data->fan_min[i] = w83l786ng_read_value(client, + W83L786NG_REG_FAN_MIN(i)); + } + + /* Update the fan divisor */ + reg_tmp = w83l786ng_read_value(client, W83L786NG_REG_FAN_DIV); + data->fan_div[0] = reg_tmp & 0x07; + data->fan_div[1] = (reg_tmp >> 4) & 0x07; + + pwmcfg = w83l786ng_read_value(client, W83L786NG_REG_FAN_CFG); + for (i = 0; i < 2; i++) { + data->pwm_mode[i] = + ((pwmcfg >> W83L786NG_PWM_MODE_SHIFT[i]) & 1) + ? 0 : 1; + data->pwm_enable[i] = + ((pwmcfg >> W83L786NG_PWM_ENABLE_SHIFT[i]) & 2) + 1; + data->pwm[i] = w83l786ng_read_value(client, + W83L786NG_REG_PWM[i]); + } + + + /* Update the temperature sensors */ + for (i = 0; i < 2; i++) { + for (j = 0; j < 3; j++) { + data->temp[i][j] = w83l786ng_read_value(client, + W83L786NG_REG_TEMP[i][j]); + } + } + + /* Update Smart Fan I/II tolerance */ + reg_tmp = w83l786ng_read_value(client, W83L786NG_REG_TOLERANCE); + data->tolerance[0] = reg_tmp & 0x0f; + data->tolerance[1] = (reg_tmp >> 4) & 0x0f; + + data->last_updated = jiffies; + data->valid = 1; + + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init +sensors_w83l786ng_init(void) +{ + return i2c_add_driver(&w83l786ng_driver); +} + +static void __exit +sensors_w83l786ng_exit(void) +{ + i2c_del_driver(&w83l786ng_driver); +} + +MODULE_AUTHOR("Kevin Lo"); +MODULE_DESCRIPTION("w83l786ng driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_w83l786ng_init); +module_exit(sensors_w83l786ng_exit); |