summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorDavid Woodhouse <dwmw2@infradead.org>2007-02-09 12:36:22 +0000
committerDavid Woodhouse <dwmw2@infradead.org>2007-02-09 12:36:22 +0000
commitc1f1625860847b57a0450a28d112423c2af675ff (patch)
tree2390866229b7d0eeb61166e77b153c8d3c70ee3a /drivers
parent552a8278d0becd671274af56a11ee601e585387a (diff)
parentcde36b37d6fa5ebc8c95461a972c379185626b2c (diff)
downloadop-kernel-dev-c1f1625860847b57a0450a28d112423c2af675ff.zip
op-kernel-dev-c1f1625860847b57a0450a28d112423c2af675ff.tar.gz
Merge branch 'master' of git://git.infradead.org/~kmpark/onenand-mtd-2.6
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/onenand/onenand_base.c572
-rw-r--r--drivers/mtd/onenand/onenand_bbt.c27
2 files changed, 428 insertions, 171 deletions
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 2da6bb2..779327b 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1,7 +1,7 @@
/*
* linux/drivers/mtd/onenand/onenand_base.c
*
- * Copyright (C) 2005-2006 Samsung Electronics
+ * Copyright (C) 2005-2007 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -94,16 +94,9 @@ static void onenand_writew(unsigned short value, void __iomem *addr)
*/
static int onenand_block_address(struct onenand_chip *this, int block)
{
- if (this->device_id & ONENAND_DEVICE_IS_DDP) {
- /* Device Flash Core select, NAND Flash Block Address */
- int dfs = 0;
-
- if (block & this->density_mask)
- dfs = 1;
-
- return (dfs << ONENAND_DDP_SHIFT) |
- (block & (this->density_mask - 1));
- }
+ /* Device Flash Core select, NAND Flash Block Address */
+ if (block & this->density_mask)
+ return ONENAND_DDP_CHIP1 | (block ^ this->density_mask);
return block;
}
@@ -118,17 +111,11 @@ static int onenand_block_address(struct onenand_chip *this, int block)
*/
static int onenand_bufferram_address(struct onenand_chip *this, int block)
{
- if (this->device_id & ONENAND_DEVICE_IS_DDP) {
- /* Device BufferRAM Select */
- int dbs = 0;
-
- if (block & this->density_mask)
- dbs = 1;
+ /* Device BufferRAM Select */
+ if (block & this->density_mask)
+ return ONENAND_DDP_CHIP1;
- return (dbs << ONENAND_DDP_SHIFT);
- }
-
- return 0;
+ return ONENAND_DDP_CHIP0;
}
/**
@@ -317,22 +304,25 @@ static int onenand_wait(struct mtd_info *mtd, int state)
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ERROR) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: controller error = 0x%04x\n", ctrl);
+ printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n", ctrl);
if (ctrl & ONENAND_CTRL_LOCK)
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: it's locked error.\n");
+ printk(KERN_ERR "onenand_wait: it's locked error.\n");
return ctrl;
}
if (interrupt & ONENAND_INT_READ) {
int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
if (ecc) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: ECC error = 0x%04x\n", ecc);
+ printk(KERN_ERR "onenand_wait: ECC error = 0x%04x\n", ecc);
if (ecc & ONENAND_ECC_2BIT_ALL) {
mtd->ecc_stats.failed++;
return ecc;
} else if (ecc & ONENAND_ECC_1BIT_ALL)
mtd->ecc_stats.corrected++;
}
+ } else if (state == FL_READING) {
+ printk(KERN_ERR "onenand_wait: read timeout! ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
+ return -EIO;
}
return 0;
@@ -587,22 +577,32 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,
static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
{
struct onenand_chip *this = mtd->priv;
- int block, page;
- int i;
+ int blockpage, found = 0;
+ unsigned int i;
- block = (int) (addr >> this->erase_shift);
- page = (int) (addr >> this->page_shift);
- page &= this->page_mask;
+ blockpage = (int) (addr >> this->page_shift);
+ /* Is there valid data? */
i = ONENAND_CURRENT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage)
+ found = 1;
+ else {
+ /* Check another BufferRAM */
+ i = ONENAND_NEXT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage) {
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+ found = 1;
+ }
+ }
- /* Is there valid data? */
- if (this->bufferram[i].block == block &&
- this->bufferram[i].page == page &&
- this->bufferram[i].valid)
- return 1;
+ if (found && ONENAND_IS_DDP(this)) {
+ /* Select DataRAM for DDP */
+ int block = (int) (addr >> this->erase_shift);
+ int value = onenand_bufferram_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+ }
- return 0;
+ return found;
}
/**
@@ -613,31 +613,26 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
*
* Update BufferRAM information
*/
-static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
+static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
int valid)
{
struct onenand_chip *this = mtd->priv;
- int block, page;
- int i;
+ int blockpage;
+ unsigned int i;
- block = (int) (addr >> this->erase_shift);
- page = (int) (addr >> this->page_shift);
- page &= this->page_mask;
+ blockpage = (int) (addr >> this->page_shift);
- /* Invalidate BufferRAM */
- for (i = 0; i < MAX_BUFFERRAM; i++) {
- if (this->bufferram[i].block == block &&
- this->bufferram[i].page == page)
- this->bufferram[i].valid = 0;
- }
+ /* Invalidate another BufferRAM */
+ i = ONENAND_NEXT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage)
+ this->bufferram[i].blockpage = -1;
/* Update BufferRAM */
i = ONENAND_CURRENT_BUFFERRAM(this);
- this->bufferram[i].block = block;
- this->bufferram[i].page = page;
- this->bufferram[i].valid = valid;
-
- return 0;
+ if (valid)
+ this->bufferram[i].blockpage = blockpage;
+ else
+ this->bufferram[i].blockpage = -1;
}
/**
@@ -716,7 +711,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read: Attempt read beyond end of device\n");
+ printk(KERN_ERR "onenand_read: Attempt read beyond end of device\n");
*retlen = 0;
return -EINVAL;
}
@@ -724,8 +719,6 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_READING);
- /* TODO handling oob */
-
stats = mtd->ecc_stats;
/* Read-while-load method */
@@ -754,9 +747,9 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
* Now we issued chip 1 read and pointed chip 1
* bufferam so we have to point chip 0 bufferam.
*/
- if (this->device_id & ONENAND_DEVICE_IS_DDP &&
- unlikely(from == (this->chipsize >> 1))) {
- this->write_word(0, this->base + ONENAND_REG_START_ADDRESS2);
+ if (ONENAND_IS_DDP(this) &&
+ unlikely(from == (this->chipsize >> 1))) {
+ this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
boundary = 1;
} else
boundary = 0;
@@ -770,7 +763,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
break;
/* Set up for next read from bufferRAM */
if (unlikely(boundary))
- this->write_word(0x8000, this->base + ONENAND_REG_START_ADDRESS2);
+ this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
ONENAND_SET_NEXT_BUFFERRAM(this);
buf += thislen;
thislen = min_t(int, mtd->writesize, len - read);
@@ -801,20 +794,59 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
}
/**
+ * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * @param mtd MTD device structure
+ * @param buf destination address
+ * @param column oob offset to read from
+ * @param thislen oob length to read
+ */
+static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int column,
+ int thislen)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct nand_oobfree *free;
+ int readcol = column;
+ int readend = column + thislen;
+ int lastgap = 0;
+ uint8_t *oob_buf = this->page_buf + mtd->writesize;
+
+ for (free = this->ecclayout->oobfree; free->length; ++free) {
+ if (readcol >= lastgap)
+ readcol += free->offset - lastgap;
+ if (readend >= lastgap)
+ readend += free->offset - lastgap;
+ lastgap = free->offset + free->length;
+ }
+ this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
+ for (free = this->ecclayout->oobfree; free->length; ++free) {
+ int free_end = free->offset + free->length;
+ if (free->offset < readend && free_end > readcol) {
+ int st = max_t(int,free->offset,readcol);
+ int ed = min_t(int,free_end,readend);
+ int n = ed - st;
+ memcpy(buf, oob_buf + st, n);
+ buf += n;
+ }
+ }
+ return 0;
+}
+
+/**
* onenand_do_read_oob - [MTD Interface] OneNAND read out-of-band
* @param mtd MTD device structure
* @param from offset to read from
* @param len number of bytes to read
* @param retlen pointer to variable to store the number of read bytes
* @param buf the databuffer to put data
+ * @param mode operation mode
*
* OneNAND read out-of-band data from the spare area
*/
-int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
+static int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf, mtd_oob_mode_t mode)
{
struct onenand_chip *this = mtd->priv;
- int read = 0, thislen, column;
+ int read = 0, thislen, column, oobsize;
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
@@ -822,21 +854,33 @@ int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
/* Initialize return length value */
*retlen = 0;
+ if (mode == MTD_OOB_AUTO)
+ oobsize = this->ecclayout->oobavail;
+ else
+ oobsize = mtd->oobsize;
+
+ column = from & (mtd->oobsize - 1);
+
+ if (unlikely(column >= oobsize)) {
+ printk(KERN_ERR "onenand_read_oob: Attempted to start read outside oob\n");
+ return -EINVAL;
+ }
+
/* Do not allow reads past end of device */
- if (unlikely((from + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: Attempt read beyond end of device\n");
+ if (unlikely(from >= mtd->size ||
+ column + len > ((mtd->size >> this->page_shift) -
+ (from >> this->page_shift)) * oobsize)) {
+ printk(KERN_ERR "onenand_read_oob: Attempted to read beyond end of device\n");
return -EINVAL;
}
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_READING);
- column = from & (mtd->oobsize - 1);
-
while (read < len) {
cond_resched();
- thislen = mtd->oobsize - column;
+ thislen = oobsize - column;
thislen = min_t(int, thislen, len);
this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
@@ -846,11 +890,14 @@ int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
ret = this->wait(mtd, FL_READING);
/* First copy data and check return value for ECC handling */
- this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+ if (mode == MTD_OOB_AUTO)
+ onenand_transfer_auto_oob(mtd, buf, column, thislen);
+ else
+ this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: read failed = 0x%x\n", ret);
- goto out;
+ printk(KERN_ERR "onenand_read_oob: read failed = 0x%x\n", ret);
+ break;
}
read += thislen;
@@ -868,7 +915,6 @@ int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
}
}
-out:
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
@@ -885,10 +931,132 @@ out:
static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
- BUG_ON(ops->mode != MTD_OOB_PLACE);
-
+ switch (ops->mode) {
+ case MTD_OOB_PLACE:
+ case MTD_OOB_AUTO:
+ break;
+ case MTD_OOB_RAW:
+ /* Not implemented yet */
+ default:
+ return -EINVAL;
+ }
return onenand_do_read_oob(mtd, from + ops->ooboffs, ops->ooblen,
- &ops->oobretlen, ops->oobbuf);
+ &ops->oobretlen, ops->oobbuf, ops->mode);
+}
+
+/**
+ * onenand_bbt_wait - [DEFAULT] wait until the command is done
+ * @param mtd MTD device structure
+ * @param state state to select the max. timeout value
+ *
+ * Wait for command done.
+ */
+static int onenand_bbt_wait(struct mtd_info *mtd, int state)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned long timeout;
+ unsigned int interrupt;
+ unsigned int ctrl;
+
+ /* The 20 msec is enough */
+ timeout = jiffies + msecs_to_jiffies(20);
+ while (time_before(jiffies, timeout)) {
+ interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+ if (interrupt & ONENAND_INT_MASTER)
+ break;
+ }
+ /* To get correct interrupt status in timeout case */
+ interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+ ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
+
+ if (ctrl & ONENAND_CTRL_ERROR) {
+ printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl);
+ /* Initial bad block case */
+ if (ctrl & ONENAND_CTRL_LOAD)
+ return ONENAND_BBT_READ_ERROR;
+ return ONENAND_BBT_READ_FATAL_ERROR;
+ }
+
+ if (interrupt & ONENAND_INT_READ) {
+ int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+ if (ecc & ONENAND_ECC_2BIT_ALL)
+ return ONENAND_BBT_READ_ERROR;
+ } else {
+ printk(KERN_ERR "onenand_bbt_wait: read timeout!"
+ "ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
+ return ONENAND_BBT_READ_FATAL_ERROR;
+ }
+
+ return 0;
+}
+
+/**
+ * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
+ * @param mtd MTD device structure
+ * @param from offset to read from
+ * @param @ops oob operation description structure
+ *
+ * OneNAND read out-of-band data from the spare area for bbt scan
+ */
+int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct onenand_chip *this = mtd->priv;
+ int read = 0, thislen, column;
+ int ret = 0;
+ size_t len = ops->ooblen;
+ u_char *buf = ops->oobbuf;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_bbt_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, len);
+
+ /* Initialize return value */
+ ops->oobretlen = 0;
+
+ /* Do not allow reads past end of device */
+ if (unlikely((from + len) > mtd->size)) {
+ printk(KERN_ERR "onenand_bbt_read_oob: Attempt read beyond end of device\n");
+ return ONENAND_BBT_READ_FATAL_ERROR;
+ }
+
+ /* Grab the lock and see if the device is available */
+ onenand_get_device(mtd, FL_READING);
+
+ column = from & (mtd->oobsize - 1);
+
+ while (read < len) {
+ cond_resched();
+
+ thislen = mtd->oobsize - column;
+ thislen = min_t(int, thislen, len);
+
+ this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
+
+ onenand_update_bufferram(mtd, from, 0);
+
+ ret = onenand_bbt_wait(mtd, FL_READING);
+ if (ret)
+ break;
+
+ this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+ read += thislen;
+ if (read == len)
+ break;
+
+ buf += thislen;
+
+ /* Read more? */
+ if (read < len) {
+ /* Update Page size */
+ from += mtd->writesize;
+ column = 0;
+ }
+ }
+
+ /* Deselect and wake up anyone waiting on the device */
+ onenand_release_device(mtd);
+
+ ops->oobretlen = read;
+ return ret;
}
#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
@@ -897,14 +1065,12 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
* @param mtd MTD device structure
* @param buf the databuffer to verify
* @param to offset to read from
- * @param len number of bytes to read and compare
*
*/
-static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to, int len)
+static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
{
struct onenand_chip *this = mtd->priv;
- char *readp = this->page_buf;
- int column = to & (mtd->oobsize - 1);
+ char *readp = this->page_buf + mtd->writesize;
int status, i;
this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
@@ -913,9 +1079,8 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
if (status)
return status;
- this->read_bufferram(mtd, ONENAND_SPARERAM, readp, column, len);
-
- for(i = 0; i < len; i++)
+ this->read_bufferram(mtd, ONENAND_SPARERAM, readp, 0, mtd->oobsize);
+ for(i = 0; i < mtd->oobsize; i++)
if (buf[i] != 0xFF && buf[i] != readp[i])
return -EBADMSG;
@@ -923,41 +1088,51 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
}
/**
- * onenand_verify_page - [GENERIC] verify the chip contents after a write
- * @param mtd MTD device structure
- * @param buf the databuffer to verify
+ * onenand_verify - [GENERIC] verify the chip contents after a write
+ * @param mtd MTD device structure
+ * @param buf the databuffer to verify
+ * @param addr offset to read from
+ * @param len number of bytes to read and compare
*
- * Check DataRAM area directly
*/
-static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, loff_t addr)
+static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len)
{
struct onenand_chip *this = mtd->priv;
- void __iomem *dataram0, *dataram1;
+ void __iomem *dataram;
int ret = 0;
+ int thislen, column;
- /* In partial page write, just skip it */
- if ((addr & (mtd->writesize - 1)) != 0)
- return 0;
+ while (len != 0) {
+ thislen = min_t(int, mtd->writesize, len);
+ column = addr & (mtd->writesize - 1);
+ if (column + thislen > mtd->writesize)
+ thislen = mtd->writesize - column;
- this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
+ this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
- ret = this->wait(mtd, FL_READING);
- if (ret)
- return ret;
+ onenand_update_bufferram(mtd, addr, 0);
+
+ ret = this->wait(mtd, FL_READING);
+ if (ret)
+ return ret;
- onenand_update_bufferram(mtd, addr, 1);
+ onenand_update_bufferram(mtd, addr, 1);
- /* Check, if the two dataram areas are same */
- dataram0 = this->base + ONENAND_DATARAM;
- dataram1 = dataram0 + mtd->writesize;
+ dataram = this->base + ONENAND_DATARAM;
+ dataram += onenand_bufferram_offset(mtd, ONENAND_DATARAM);
- if (memcmp(dataram0, dataram1, mtd->writesize))
- return -EBADMSG;
+ if (memcmp(buf, dataram + column, thislen))
+ return -EBADMSG;
+
+ len -= thislen;
+ buf += thislen;
+ addr += thislen;
+ }
return 0;
}
#else
-#define onenand_verify_page(...) (0)
+#define onenand_verify(...) (0)
#define onenand_verify_oob(...) (0)
#endif
@@ -988,60 +1163,57 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
/* Do not allow writes past end of device */
if (unlikely((to + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt write to past end of device\n");
+ printk(KERN_ERR "onenand_write: Attempt write to past end of device\n");
return -EINVAL;
}
/* Reject writes, which are not page aligned */
if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt to write not page aligned data\n");
+ printk(KERN_ERR "onenand_write: Attempt to write not page aligned data\n");
return -EINVAL;
}
column = to & (mtd->writesize - 1);
- subpage = column || (len & (mtd->writesize - 1));
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_WRITING);
/* Loop until all data write */
while (written < len) {
- int bytes = mtd->writesize;
- int thislen = min_t(int, bytes, len - written);
+ int thislen = min_t(int, mtd->writesize - column, len - written);
u_char *wbuf = (u_char *) buf;
cond_resched();
- this->command(mtd, ONENAND_CMD_BUFFERRAM, to, bytes);
+ this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
/* Partial page write */
+ subpage = thislen < mtd->writesize;
if (subpage) {
- bytes = min_t(int, bytes - column, (int) len);
memset(this->page_buf, 0xff, mtd->writesize);
- memcpy(this->page_buf + column, buf, bytes);
+ memcpy(this->page_buf + column, buf, thislen);
wbuf = this->page_buf;
- /* Even though partial write, we need page size */
- thislen = mtd->writesize;
}
- this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, thislen);
+ this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
+ ret = this->wait(mtd, FL_WRITING);
+
/* In partial page write we don't update bufferram */
- onenand_update_bufferram(mtd, to, !subpage);
+ onenand_update_bufferram(mtd, to, !ret && !subpage);
- ret = this->wait(mtd, FL_WRITING);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: write filaed %d\n", ret);
+ printk(KERN_ERR "onenand_write: write filaed %d\n", ret);
break;
}
/* Only check verify write turn on */
- ret = onenand_verify_page(mtd, (u_char *) wbuf, to);
+ ret = onenand_verify(mtd, (u_char *) wbuf, to, thislen);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: verify failed %d\n", ret);
+ printk(KERN_ERR "onenand_write: verify failed %d\n", ret);
break;
}
@@ -1064,20 +1236,58 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
}
/**
+ * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
+ * @param mtd MTD device structure
+ * @param oob_buf oob buffer
+ * @param buf source address
+ * @param column oob offset to write to
+ * @param thislen oob length to write
+ */
+static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
+ const u_char *buf, int column, int thislen)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct nand_oobfree *free;
+ int writecol = column;
+ int writeend = column + thislen;
+ int lastgap = 0;
+
+ for (free = this->ecclayout->oobfree; free->length; ++free) {
+ if (writecol >= lastgap)
+ writecol += free->offset - lastgap;
+ if (writeend >= lastgap)
+ writeend += free->offset - lastgap;
+ lastgap = free->offset + free->length;
+ }
+ for (free = this->ecclayout->oobfree; free->length; ++free) {
+ int free_end = free->offset + free->length;
+ if (free->offset < writeend && free_end > writecol) {
+ int st = max_t(int,free->offset,writecol);
+ int ed = min_t(int,free_end,writeend);
+ int n = ed - st;
+ memcpy(oob_buf + st, buf, n);
+ buf += n;
+ }
+ }
+ return 0;
+}
+
+/**
* onenand_do_write_oob - [Internal] OneNAND write out-of-band
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
* @param buf the data to write
+ * @param mode operation mode
*
* OneNAND write out-of-band
*/
static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
+ size_t *retlen, const u_char *buf, mtd_oob_mode_t mode)
{
struct onenand_chip *this = mtd->priv;
- int column, ret = 0;
+ int column, ret = 0, oobsize;
int written = 0;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
@@ -1085,9 +1295,30 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
/* Initialize retlen, in case of early exit */
*retlen = 0;
- /* Do not allow writes past end of device */
- if (unlikely((to + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: Attempt write to past end of device\n");
+ if (mode == MTD_OOB_AUTO)
+ oobsize = this->ecclayout->oobavail;
+ else
+ oobsize = mtd->oobsize;
+
+ column = to & (mtd->oobsize - 1);
+
+ if (unlikely(column >= oobsize)) {
+ printk(KERN_ERR "onenand_write_oob: Attempted to start write outside oob\n");
+ return -EINVAL;
+ }
+
+ /* For compatibility with NAND: Do not allow write past end of page */
+ if (column + len > oobsize) {
+ printk(KERN_ERR "onenand_write_oob: "
+ "Attempt to write past end of page\n");
+ return -EINVAL;
+ }
+
+ /* Do not allow reads past end of device */
+ if (unlikely(to >= mtd->size ||
+ column + len > ((mtd->size >> this->page_shift) -
+ (to >> this->page_shift)) * oobsize)) {
+ printk(KERN_ERR "onenand_write_oob: Attempted to write past end of device\n");
return -EINVAL;
}
@@ -1096,18 +1327,19 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
/* Loop until all data write */
while (written < len) {
- int thislen = min_t(int, mtd->oobsize, len - written);
+ int thislen = min_t(int, oobsize, len - written);
cond_resched();
- column = to & (mtd->oobsize - 1);
-
this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
/* We send data to spare ram with oobsize
* to prevent byte access */
memset(this->page_buf, 0xff, mtd->oobsize);
- memcpy(this->page_buf + column, buf, thislen);
+ if (mode == MTD_OOB_AUTO)
+ onenand_fill_auto_oob(mtd, this->page_buf, buf, column, thislen);
+ else
+ memcpy(this->page_buf + column, buf, thislen);
this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
@@ -1116,26 +1348,25 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
ret = this->wait(mtd, FL_WRITING);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: write filaed %d\n", ret);
- goto out;
+ printk(KERN_ERR "onenand_write_oob: write failed %d\n", ret);
+ break;
}
- ret = onenand_verify_oob(mtd, buf, to, thislen);
+ ret = onenand_verify_oob(mtd, this->page_buf, to);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: verify failed %d\n", ret);
- goto out;
+ printk(KERN_ERR "onenand_write_oob: verify failed %d\n", ret);
+ break;
}
written += thislen;
-
if (written == len)
break;
- to += thislen;
+ to += mtd->writesize;
buf += thislen;
+ column = 0;
}
-out:
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
@@ -1153,10 +1384,17 @@ out:
static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
- BUG_ON(ops->mode != MTD_OOB_PLACE);
-
+ switch (ops->mode) {
+ case MTD_OOB_PLACE:
+ case MTD_OOB_AUTO:
+ break;
+ case MTD_OOB_RAW:
+ /* Not implemented yet */
+ default:
+ return -EINVAL;
+ }
return onenand_do_write_oob(mtd, to + ops->ooboffs, ops->ooblen,
- &ops->oobretlen, ops->oobbuf);
+ &ops->oobretlen, ops->oobbuf, ops->mode);
}
/**
@@ -1199,19 +1437,19 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
/* Start address must align on block boundary */
if (unlikely(instr->addr & (block_size - 1))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Unaligned address\n");
+ printk(KERN_ERR "onenand_erase: Unaligned address\n");
return -EINVAL;
}
/* Length must align on block boundary */
if (unlikely(instr->len & (block_size - 1))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Length not block aligned\n");
+ printk(KERN_ERR "onenand_erase: Length not block aligned\n");
return -EINVAL;
}
/* Do not allow erase past end of device */
if (unlikely((instr->len + instr->addr) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Erase past end of device\n");
+ printk(KERN_ERR "onenand_erase: Erase past end of device\n");
return -EINVAL;
}
@@ -1241,7 +1479,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
ret = this->wait(mtd, FL_ERASING);
/* Check, if it is write protected */
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
+ printk(KERN_ERR "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = addr;
goto erase_exit;
@@ -1322,7 +1560,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
/* We write two bytes, so we dont have to mess with 16 bit access */
ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
- return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf);
+ return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf, MTD_OOB_PLACE);
}
/**
@@ -1491,6 +1729,8 @@ static int onenand_unlock_all(struct mtd_info *mtd)
struct onenand_chip *this = mtd->priv;
if (this->options & ONENAND_HAS_UNLOCK_ALL) {
+ /* Set start block address */
+ this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
/* Write unlock command */
this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
@@ -1503,13 +1743,10 @@ static int onenand_unlock_all(struct mtd_info *mtd)
continue;
/* Workaround for all block unlock in DDP */
- if (this->device_id & ONENAND_DEVICE_IS_DDP) {
- loff_t ofs;
- size_t len;
-
+ if (ONENAND_IS_DDP(this)) {
/* 1st block on another chip */
- ofs = this->chipsize >> 1;
- len = 1 << this->erase_shift;
+ loff_t ofs = this->chipsize >> 1;
+ size_t len = mtd->erasesize;
onenand_unlock(mtd, ofs, len);
}
@@ -1617,7 +1854,7 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
this->wait(mtd, FL_OTPING);
- ret = onenand_do_write_oob(mtd, from, len, retlen, buf);
+ ret = onenand_do_write_oob(mtd, from, len, retlen, buf, MTD_OOB_PLACE);
/* Exit OTP access mode */
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
@@ -1823,12 +2060,13 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
#endif /* CONFIG_MTD_ONENAND_OTP */
/**
- * onenand_lock_scheme - Check and set OneNAND lock scheme
+ * onenand_check_features - Check and set OneNAND features
* @param mtd MTD data structure
*
- * Check and set OneNAND lock scheme
+ * Check and set OneNAND features
+ * - lock scheme
*/
-static void onenand_lock_scheme(struct mtd_info *mtd)
+static void onenand_check_features(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
unsigned int density, process;
@@ -1961,26 +2199,28 @@ static int onenand_probe(struct mtd_info *mtd)
density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
this->chipsize = (16 << density) << 20;
/* Set density mask. it is used for DDP */
- this->density_mask = (1 << (density + 6));
+ if (ONENAND_IS_DDP(this))
+ this->density_mask = (1 << (density + 6));
+ else
+ this->density_mask = 0;
/* OneNAND page size & block size */
/* The data buffer size is equal to page size */
mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
mtd->oobsize = mtd->writesize >> 5;
- /* Pagers per block is always 64 in OneNAND */
+ /* Pages per a block are always 64 in OneNAND */
mtd->erasesize = mtd->writesize << 6;
this->erase_shift = ffs(mtd->erasesize) - 1;
this->page_shift = ffs(mtd->writesize) - 1;
- this->ppb_shift = (this->erase_shift - this->page_shift);
- this->page_mask = (mtd->erasesize / mtd->writesize) - 1;
+ this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
/* REVIST: Multichip handling */
mtd->size = this->chipsize;
- /* Check OneNAND lock scheme */
- onenand_lock_scheme(mtd);
+ /* Check OneNAND features */
+ onenand_check_features(mtd);
return 0;
}
@@ -2021,6 +2261,7 @@ static void onenand_resume(struct mtd_info *mtd)
*/
int onenand_scan(struct mtd_info *mtd, int maxchips)
{
+ int i;
struct onenand_chip *this = mtd->priv;
if (!this->read_word)
@@ -2092,6 +2333,16 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
}
this->subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+ /*
+ * The number of bytes available for a client to place data into
+ * the out of band area
+ */
+ this->ecclayout->oobavail = 0;
+ for (i = 0; this->ecclayout->oobfree[i].length; i++)
+ this->ecclayout->oobavail +=
+ this->ecclayout->oobfree[i].length;
+
mtd->ecclayout = this->ecclayout;
/* Fill in remaining MTD driver data */
@@ -2144,8 +2395,11 @@ void onenand_release(struct mtd_info *mtd)
del_mtd_device (mtd);
/* Free bad block table memory, if allocated */
- if (this->bbm)
+ if (this->bbm) {
+ struct bbm_info *bbm = this->bbm;
+ kfree(bbm->bbt);
kfree(this->bbm);
+ }
/* Buffer allocated by onenand_scan */
if (this->options & ONENAND_PAGEBUF_ALLOC)
kfree(this->page_buf);
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index 98f8fd1..aecdd50 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -17,8 +17,8 @@
#include <linux/mtd/onenand.h>
#include <linux/mtd/compatmac.h>
-extern int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf);
+extern int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops);
/**
* check_short_pattern - [GENERIC] check if a pattern is in the buffer
@@ -65,10 +65,11 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
int startblock;
loff_t from;
size_t readlen, ooblen;
+ struct mtd_oob_ops ops;
printk(KERN_INFO "Scanning device for bad blocks\n");
- len = 1;
+ len = 2;
/* We need only read few bytes from the OOB area */
scanlen = ooblen = 0;
@@ -82,22 +83,24 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
startblock = 0;
from = 0;
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooblen = readlen;
+ ops.oobbuf = buf;
+ ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
+
for (i = startblock; i < numblocks; ) {
int ret;
for (j = 0; j < len; j++) {
- size_t retlen;
-
/* No need to read pages fully,
* just read required OOB bytes */
- ret = onenand_do_read_oob(mtd, from + j * mtd->writesize + bd->offs,
- readlen, &retlen, &buf[0]);
+ ret = onenand_bbt_read_oob(mtd, from + j * mtd->writesize + bd->offs, &ops);
/* If it is a initial bad block, just ignore it */
- if (ret && !(ret & ONENAND_CTRL_LOAD))
- return ret;
+ if (ret == ONENAND_BBT_READ_FATAL_ERROR)
+ return -EIO;
- if (check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
+ if (ret || check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
i >> 1, (unsigned int) from);
@@ -168,8 +171,8 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
* marked good / bad blocks and writes the bad block table(s) to
* the selected place.
*
- * The bad block table memory is allocated here. It must be freed
- * by calling the onenand_free_bbt function.
+ * The bad block table memory is allocated here. It is freed
+ * by the onenand_release function.
*
*/
int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
OpenPOWER on IntegriCloud