summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-07-25 21:00:19 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-07-25 21:00:19 -0700
commit45b583b10a8b438b970e95a7d1d4db22c9e35004 (patch)
tree14fa481598289df0459580c582b48a9d95db51f6 /drivers
parent154dd78d30b56ffb8b447f629bfcceb14150e5c4 (diff)
parentf19da2ce8ef5e49b8b8ea199c3601dd45d71b262 (diff)
downloadop-kernel-dev-45b583b10a8b438b970e95a7d1d4db22c9e35004.zip
op-kernel-dev-45b583b10a8b438b970e95a7d1d4db22c9e35004.tar.gz
Merge 'akpm' patch series
* Merge akpm patch series: (122 commits) drivers/connector/cn_proc.c: remove unused local Documentation/SubmitChecklist: add RCU debug config options reiserfs: use hweight_long() reiserfs: use proper little-endian bitops pnpacpi: register disabled resources drivers/rtc/rtc-tegra.c: properly initialize spinlock drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time() drivers/rtc: add support for Qualcomm PMIC8xxx RTC drivers/rtc/rtc-s3c.c: support clock gating drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200 init: skip calibration delay if previously done misc/eeprom: add eeprom access driver for digsy_mtc board misc/eeprom: add driver for microwire 93xx46 EEPROMs checkpatch.pl: update $logFunctions checkpatch: make utf-8 test --strict checkpatch.pl: add ability to ignore various messages checkpatch: add a "prefer __aligned" check checkpatch: validate signature styles and To: and Cc: lines checkpatch: add __rcu as a sparse modifier checkpatch: suggest using min_t or max_t ... Did this as a merge because of (trivial) conflicts in - Documentation/feature-removal-schedule.txt - arch/xtensa/include/asm/uaccess.h that were just easier to fix up in the merge than in the patch series.
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/sata_dwc_460ex.c3
-rw-r--r--drivers/connector/cn_proc.c1
-rw-r--r--drivers/eisa/pci_eisa.c4
-rw-r--r--drivers/firmware/sigma.c3
-rw-r--r--drivers/gpu/drm/drm_scatter.c10
-rw-r--r--drivers/gpu/drm/radeon/radeon_mem.c3
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c3
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_resource.c8
-rw-r--r--drivers/gpu/vga/vgaarb.c3
-rw-r--r--drivers/leds/Kconfig1
-rw-r--r--drivers/leds/leds-lm3530.c67
-rw-r--r--drivers/leds/leds-lp5521.c4
-rw-r--r--drivers/leds/leds-sunfire.c12
-rw-r--r--drivers/misc/Kconfig12
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/eeprom/Kconfig25
-rw-r--r--drivers/misc/eeprom/Makefile2
-rw-r--r--drivers/misc/eeprom/digsy_mtc_eeprom.c85
-rw-r--r--drivers/misc/eeprom/eeprom_93xx46.c410
-rw-r--r--drivers/misc/fsa9480.c557
-rw-r--r--drivers/misc/pch_phub.c5
-rw-r--r--drivers/mmc/core/core.c1
-rw-r--r--drivers/pnp/pnpacpi/rsparser.c52
-rw-r--r--drivers/rtc/Kconfig14
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/rtc-mpc5121.c81
-rw-r--r--drivers/rtc/rtc-pm8xxx.c550
-rw-r--r--drivers/rtc/rtc-s3c.c27
-rw-r--r--drivers/rtc/rtc-tegra.c2
-rw-r--r--drivers/rtc/rtc-twl.c2
-rw-r--r--drivers/video/backlight/Kconfig8
-rw-r--r--drivers/video/backlight/Makefile1
-rw-r--r--drivers/video/backlight/adp8860_bl.c3
-rw-r--r--drivers/video/backlight/ams369fg06.c646
-rw-r--r--drivers/video/backlight/ld9040.c17
-rw-r--r--drivers/video/backlight/s6e63m0.c11
-rw-r--r--drivers/xen/Kconfig30
-rw-r--r--drivers/xen/balloon.c139
38 files changed, 2706 insertions, 98 deletions
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index b02c4ff..0a9a774 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -1642,13 +1642,12 @@ static int sata_dwc_probe(struct platform_device *ofdev)
const struct ata_port_info *ppi[] = { &pi, NULL };
/* Allocate DWC SATA device */
- hsdev = kmalloc(sizeof(*hsdev), GFP_KERNEL);
+ hsdev = kzalloc(sizeof(*hsdev), GFP_KERNEL);
if (hsdev == NULL) {
dev_err(&ofdev->dev, "kmalloc failed for hsdev\n");
err = -ENOMEM;
goto error;
}
- memset(hsdev, 0, sizeof(*hsdev));
/* Ioremap SATA registers */
base = of_iomap(ofdev->dev.of_node, 0);
diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c
index 281902d..0debc17 100644
--- a/drivers/connector/cn_proc.c
+++ b/drivers/connector/cn_proc.c
@@ -173,7 +173,6 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id)
struct proc_event *ev;
struct timespec ts;
__u8 buffer[CN_PROC_MSG_SIZE];
- struct task_struct *tracer;
if (atomic_read(&proc_event_num_listeners) < 1)
return;
diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c
index 0dd0f63..30da70d 100644
--- a/drivers/eisa/pci_eisa.c
+++ b/drivers/eisa/pci_eisa.c
@@ -45,13 +45,13 @@ static int __init pci_eisa_init(struct pci_dev *pdev,
return 0;
}
-static struct pci_device_id pci_eisa_pci_tbl[] = {
+static struct pci_device_id __initdata pci_eisa_pci_tbl[] = {
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_BRIDGE_EISA << 8, 0xffff00, 0 },
{ 0, }
};
-static struct pci_driver pci_eisa_driver = {
+static struct pci_driver __initdata pci_eisa_driver = {
.name = "pci_eisa",
.id_table = pci_eisa_pci_tbl,
.probe = pci_eisa_init,
diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c
index c19cd2c..f10fc52 100644
--- a/drivers/firmware/sigma.c
+++ b/drivers/firmware/sigma.c
@@ -11,6 +11,7 @@
#include <linux/firmware.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
+#include <linux/module.h>
#include <linux/sigma.h>
/* Return: 0==OK, <0==error, =1 ==no more actions */
@@ -113,3 +114,5 @@ int process_sigma_firmware(struct i2c_client *client, const char *name)
return ret;
}
EXPORT_SYMBOL(process_sigma_firmware);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/drm_scatter.c b/drivers/gpu/drm/drm_scatter.c
index d15e09b..7525e03 100644
--- a/drivers/gpu/drm/drm_scatter.c
+++ b/drivers/gpu/drm/drm_scatter.c
@@ -83,30 +83,26 @@ int drm_sg_alloc(struct drm_device *dev, struct drm_scatter_gather * request)
if (dev->sg)
return -EINVAL;
- entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+ entry = kzalloc(sizeof(*entry), GFP_KERNEL);
if (!entry)
return -ENOMEM;
- memset(entry, 0, sizeof(*entry));
pages = (request->size + PAGE_SIZE - 1) / PAGE_SIZE;
DRM_DEBUG("size=%ld pages=%ld\n", request->size, pages);
entry->pages = pages;
- entry->pagelist = kmalloc(pages * sizeof(*entry->pagelist), GFP_KERNEL);
+ entry->pagelist = kcalloc(pages, sizeof(*entry->pagelist), GFP_KERNEL);
if (!entry->pagelist) {
kfree(entry);
return -ENOMEM;
}
- memset(entry->pagelist, 0, pages * sizeof(*entry->pagelist));
-
- entry->busaddr = kmalloc(pages * sizeof(*entry->busaddr), GFP_KERNEL);
+ entry->busaddr = kcalloc(pages, sizeof(*entry->busaddr), GFP_KERNEL);
if (!entry->busaddr) {
kfree(entry->pagelist);
kfree(entry);
return -ENOMEM;
}
- memset((void *)entry->busaddr, 0, pages * sizeof(*entry->busaddr));
entry->virtual = drm_vmalloc_dma(pages << PAGE_SHIFT);
if (!entry->virtual) {
diff --git a/drivers/gpu/drm/radeon/radeon_mem.c b/drivers/gpu/drm/radeon/radeon_mem.c
index ed95155..988548e 100644
--- a/drivers/gpu/drm/radeon/radeon_mem.c
+++ b/drivers/gpu/drm/radeon/radeon_mem.c
@@ -139,7 +139,7 @@ static int init_heap(struct mem_block **heap, int start, int size)
if (!blocks)
return -ENOMEM;
- *heap = kmalloc(sizeof(**heap), GFP_KERNEL);
+ *heap = kzalloc(sizeof(**heap), GFP_KERNEL);
if (!*heap) {
kfree(blocks);
return -ENOMEM;
@@ -150,7 +150,6 @@ static int init_heap(struct mem_block **heap, int start, int size)
blocks->file_priv = NULL;
blocks->next = blocks->prev = *heap;
- memset(*heap, 0, sizeof(**heap));
(*heap)->file_priv = (struct drm_file *) - 1;
(*heap)->next = (*heap)->prev = blocks;
return 0;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
index f1a52f9..07ce02d 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
@@ -585,11 +585,10 @@ int vmw_overlay_init(struct vmw_private *dev_priv)
return -ENOSYS;
}
- overlay = kmalloc(sizeof(*overlay), GFP_KERNEL);
+ overlay = kzalloc(sizeof(*overlay), GFP_KERNEL);
if (!overlay)
return -ENOMEM;
- memset(overlay, 0, sizeof(*overlay));
mutex_init(&overlay->mutex);
for (i = 0; i < VMW_MAX_NUM_STREAMS; i++) {
overlay->stream[i].buf = NULL;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 5408b1b..bfe1bcc 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -612,11 +612,9 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data,
srf->sizes[0].height == 64 &&
srf->format == SVGA3D_A8R8G8B8) {
- srf->snooper.image = kmalloc(64 * 64 * 4, GFP_KERNEL);
- /* clear the image */
- if (srf->snooper.image) {
- memset(srf->snooper.image, 0x00, 64 * 64 * 4);
- } else {
+ /* allocate image area and clear it */
+ srf->snooper.image = kzalloc(64 * 64 * 4, GFP_KERNEL);
+ if (!srf->snooper.image) {
DRM_ERROR("Failed to allocate cursor_image\n");
ret = -ENOMEM;
goto out_err1;
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index 8a1021f..c72f1c0 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -1171,10 +1171,9 @@ static int vga_arb_open(struct inode *inode, struct file *file)
pr_debug("%s\n", __func__);
- priv = kmalloc(sizeof(struct vga_arb_private), GFP_KERNEL);
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (priv == NULL)
return -ENOMEM;
- memset(priv, 0, sizeof(*priv));
spin_lock_init(&priv->lock);
file->private_data = priv;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6c21c29..b591e72 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -365,6 +365,7 @@ config LEDS_NS2
config LEDS_NETXBIG
tristate "LED support for Big Network series LEDs"
depends on MACH_NET2BIG_V2 || MACH_NET5BIG_V2
+ depends on LEDS_CLASS
default y
help
This option enable support for LEDs found on the LaCie 2Big
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index 4d7ce76..3dd7090 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -68,17 +68,16 @@
#define LM3530_ALS2_IMP_SHIFT (4)
/* Zone Boundary Register defaults */
-#define LM3530_DEF_ZB_0 (0x33)
-#define LM3530_DEF_ZB_1 (0x66)
-#define LM3530_DEF_ZB_2 (0x99)
-#define LM3530_DEF_ZB_3 (0xCC)
+#define LM3530_ALS_ZB_MAX (4)
+#define LM3530_ALS_WINDOW_mV (1000)
+#define LM3530_ALS_OFFSET_mV (4)
/* Zone Target Register defaults */
-#define LM3530_DEF_ZT_0 (0x19)
-#define LM3530_DEF_ZT_1 (0x33)
+#define LM3530_DEF_ZT_0 (0x7F)
+#define LM3530_DEF_ZT_1 (0x66)
#define LM3530_DEF_ZT_2 (0x4C)
-#define LM3530_DEF_ZT_3 (0x66)
-#define LM3530_DEF_ZT_4 (0x7F)
+#define LM3530_DEF_ZT_3 (0x33)
+#define LM3530_DEF_ZT_4 (0x19)
struct lm3530_mode_map {
const char *mode;
@@ -150,6 +149,8 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
u8 als_imp_sel = 0;
u8 brightness;
u8 reg_val[LM3530_REG_MAX];
+ u8 zones[LM3530_ALS_ZB_MAX];
+ u32 als_vmin, als_vmax, als_vstep;
struct lm3530_platform_data *pltfm = drvdata->pdata;
struct i2c_client *client = drvdata->client;
@@ -161,6 +162,26 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
gen_config |= (LM3530_ENABLE_I2C);
if (drvdata->mode == LM3530_BL_MODE_ALS) {
+ if (pltfm->als_vmax == 0) {
+ pltfm->als_vmin = als_vmin = 0;
+ pltfm->als_vmin = als_vmax = LM3530_ALS_WINDOW_mV;
+ }
+
+ als_vmin = pltfm->als_vmin;
+ als_vmax = pltfm->als_vmax;
+
+ if ((als_vmax - als_vmin) > LM3530_ALS_WINDOW_mV)
+ pltfm->als_vmax = als_vmax =
+ als_vmin + LM3530_ALS_WINDOW_mV;
+
+ /* n zone boundary makes n+1 zones */
+ als_vstep = (als_vmax - als_vmin) / (LM3530_ALS_ZB_MAX + 1);
+
+ for (i = 0; i < LM3530_ALS_ZB_MAX; i++)
+ zones[i] = (((als_vmin + LM3530_ALS_OFFSET_mV) +
+ als_vstep + (i * als_vstep)) * LED_FULL)
+ / 1000;
+
als_config =
(pltfm->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
(LM3530_ENABLE_ALS) |
@@ -169,6 +190,7 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
als_imp_sel =
(pltfm->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
(pltfm->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
+
}
if (drvdata->mode == LM3530_BL_MODE_PWM)
@@ -190,10 +212,10 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
reg_val[3] = 0x00; /* LM3530_ALS_ZONE_REG */
reg_val[4] = als_imp_sel; /* LM3530_ALS_IMP_SELECT */
reg_val[5] = brightness; /* LM3530_BRT_CTRL_REG */
- reg_val[6] = LM3530_DEF_ZB_0; /* LM3530_ALS_ZB0_REG */
- reg_val[7] = LM3530_DEF_ZB_1; /* LM3530_ALS_ZB1_REG */
- reg_val[8] = LM3530_DEF_ZB_2; /* LM3530_ALS_ZB2_REG */
- reg_val[9] = LM3530_DEF_ZB_3; /* LM3530_ALS_ZB3_REG */
+ reg_val[6] = zones[0]; /* LM3530_ALS_ZB0_REG */
+ reg_val[7] = zones[1]; /* LM3530_ALS_ZB1_REG */
+ reg_val[8] = zones[2]; /* LM3530_ALS_ZB2_REG */
+ reg_val[9] = zones[3]; /* LM3530_ALS_ZB3_REG */
reg_val[10] = LM3530_DEF_ZT_0; /* LM3530_ALS_Z0T_REG */
reg_val[11] = LM3530_DEF_ZT_1; /* LM3530_ALS_Z1T_REG */
reg_val[12] = LM3530_DEF_ZT_2; /* LM3530_ALS_Z2T_REG */
@@ -265,6 +287,24 @@ static void lm3530_brightness_set(struct led_classdev *led_cdev,
}
}
+static ssize_t lm3530_mode_get(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = container_of(
+ dev->parent, struct i2c_client, dev);
+ struct lm3530_data *drvdata = i2c_get_clientdata(client);
+ int i, len = 0;
+
+ for (i = 0; i < ARRAY_SIZE(mode_map); i++)
+ if (drvdata->mode == mode_map[i].mode_val)
+ len += sprintf(buf + len, "[%s] ", mode_map[i].mode);
+ else
+ len += sprintf(buf + len, "%s ", mode_map[i].mode);
+
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
static ssize_t lm3530_mode_set(struct device *dev, struct device_attribute
*attr, const char *buf, size_t size)
@@ -298,8 +338,7 @@ static ssize_t lm3530_mode_set(struct device *dev, struct device_attribute
return sizeof(drvdata->mode);
}
-
-static DEVICE_ATTR(mode, 0644, NULL, lm3530_mode_set);
+static DEVICE_ATTR(mode, 0644, lm3530_mode_get, lm3530_mode_set);
static int __devinit lm3530_probe(struct i2c_client *client,
const struct i2c_device_id *id)
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index cc1dc48..9fc122c 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -744,7 +744,7 @@ fail1:
return ret;
}
-static int lp5521_remove(struct i2c_client *client)
+static int __devexit lp5521_remove(struct i2c_client *client)
{
struct lp5521_chip *chip = i2c_get_clientdata(client);
int i;
@@ -775,7 +775,7 @@ static struct i2c_driver lp5521_driver = {
.name = "lp5521",
},
.probe = lp5521_probe,
- .remove = lp5521_remove,
+ .remove = __devexit_p(lp5521_remove),
.id_table = lp5521_id,
};
diff --git a/drivers/leds/leds-sunfire.c b/drivers/leds/leds-sunfire.c
index ab6d18f..1757396 100644
--- a/drivers/leds/leds-sunfire.c
+++ b/drivers/leds/leds-sunfire.c
@@ -127,17 +127,19 @@ static int __devinit sunfire_led_generic_probe(struct platform_device *pdev,
struct led_type *types)
{
struct sunfire_drvdata *p;
- int i, err = -EINVAL;
+ int i, err;
if (pdev->num_resources != 1) {
printk(KERN_ERR PFX "Wrong number of resources %d, should be 1\n",
pdev->num_resources);
+ err = -EINVAL;
goto out;
}
p = kzalloc(sizeof(*p), GFP_KERNEL);
if (!p) {
printk(KERN_ERR PFX "Could not allocate struct sunfire_drvdata\n");
+ err = -ENOMEM;
goto out;
}
@@ -160,14 +162,14 @@ static int __devinit sunfire_led_generic_probe(struct platform_device *pdev,
dev_set_drvdata(&pdev->dev, p);
- err = 0;
-out:
- return err;
+ return 0;
out_unregister_led_cdevs:
for (i--; i >= 0; i--)
led_classdev_unregister(&p->leds[i].led_cdev);
- goto out;
+ kfree(p);
+out:
+ return err;
}
static int __devexit sunfire_led_generic_remove(struct platform_device *pdev)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4e349cd..0a4d86c 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -245,8 +245,7 @@ config SGI_XP
config CS5535_MFGPT
tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
- depends on PCI
- depends on X86
+ depends on PCI && X86 && MFD_CS5535
default n
help
This driver provides access to MFGPT functionality for other
@@ -490,6 +489,15 @@ config PCH_PHUB
To compile this driver as a module, choose M here: the module will
be called pch_phub.
+config USB_SWITCH_FSA9480
+ tristate "FSA9480 USB Switch"
+ depends on I2C
+ help
+ The FSA9480 is a USB port accessory detector and switch.
+ The FSA9480 is fully controlled using I2C and enables USB data,
+ stereo and mono audio, video, microphone and UART data to use
+ a common connector port.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 5f03172..3328215 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -46,3 +46,4 @@ obj-y += ti-st/
obj-$(CONFIG_AB8500_PWM) += ab8500-pwm.o
obj-y += lis3lv02d/
obj-y += carma/
+obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 9118613..26cf12c 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -70,4 +70,29 @@ config EEPROM_93CX6
If unsure, say N.
+config EEPROM_93XX46
+ tristate "Microwire EEPROM 93XX46 support"
+ depends on SPI && SYSFS
+ help
+ Driver for the microwire EEPROM chipsets 93xx46x. The driver
+ supports both read and write commands and also the command to
+ erase the whole EEPROM.
+
+ This driver can also be built as a module. If so, the module
+ will be called eeprom_93xx46.
+
+ If unsure, say N.
+
+config EEPROM_DIGSY_MTC_CFG
+ bool "DigsyMTC display configuration EEPROMs device"
+ depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO
+ help
+ This option enables access to display configuration EEPROMs
+ on digsy_mtc board. You have to additionally select Microwire
+ EEPROM 93XX46 driver. sysfs entries will be created for that
+ EEPROM allowing to read/write the configuration data or to
+ erase the whole EEPROM.
+
+ If unsure, say N.
+
endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
index df3d68f..fc1e81d 100644
--- a/drivers/misc/eeprom/Makefile
+++ b/drivers/misc/eeprom/Makefile
@@ -3,3 +3,5 @@ obj-$(CONFIG_EEPROM_AT25) += at25.o
obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o
obj-$(CONFIG_EEPROM_MAX6875) += max6875.o
obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
+obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o
+obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o
diff --git a/drivers/misc/eeprom/digsy_mtc_eeprom.c b/drivers/misc/eeprom/digsy_mtc_eeprom.c
new file mode 100644
index 0000000..66d9e1b
--- /dev/null
+++ b/drivers/misc/eeprom/digsy_mtc_eeprom.c
@@ -0,0 +1,85 @@
+/*
+ * EEPROMs access control driver for display configuration EEPROMs
+ * on DigsyMTC board.
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/eeprom_93xx46.h>
+
+#define GPIO_EEPROM_CLK 216
+#define GPIO_EEPROM_CS 210
+#define GPIO_EEPROM_DI 217
+#define GPIO_EEPROM_DO 249
+#define GPIO_EEPROM_OE 255
+#define EE_SPI_BUS_NUM 1
+
+static void digsy_mtc_op_prepare(void *p)
+{
+ /* enable */
+ gpio_set_value(GPIO_EEPROM_OE, 0);
+}
+
+static void digsy_mtc_op_finish(void *p)
+{
+ /* disable */
+ gpio_set_value(GPIO_EEPROM_OE, 1);
+}
+
+struct eeprom_93xx46_platform_data digsy_mtc_eeprom_data = {
+ .flags = EE_ADDR8,
+ .prepare = digsy_mtc_op_prepare,
+ .finish = digsy_mtc_op_finish,
+};
+
+static struct spi_gpio_platform_data eeprom_spi_gpio_data = {
+ .sck = GPIO_EEPROM_CLK,
+ .mosi = GPIO_EEPROM_DI,
+ .miso = GPIO_EEPROM_DO,
+ .num_chipselect = 1,
+};
+
+static struct platform_device digsy_mtc_eeprom = {
+ .name = "spi_gpio",
+ .id = EE_SPI_BUS_NUM,
+ .dev = {
+ .platform_data = &eeprom_spi_gpio_data,
+ },
+};
+
+static struct spi_board_info digsy_mtc_eeprom_info[] __initdata = {
+ {
+ .modalias = "93xx46",
+ .max_speed_hz = 1000000,
+ .bus_num = EE_SPI_BUS_NUM,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .controller_data = (void *)GPIO_EEPROM_CS,
+ .platform_data = &digsy_mtc_eeprom_data,
+ },
+};
+
+static int __init digsy_mtc_eeprom_devices_init(void)
+{
+ int ret;
+
+ ret = gpio_request_one(GPIO_EEPROM_OE, GPIOF_OUT_INIT_HIGH,
+ "93xx46 EEPROMs OE");
+ if (ret) {
+ pr_err("can't request gpio %d\n", GPIO_EEPROM_OE);
+ return ret;
+ }
+ spi_register_board_info(digsy_mtc_eeprom_info,
+ ARRAY_SIZE(digsy_mtc_eeprom_info));
+ return platform_device_register(&digsy_mtc_eeprom);
+}
+device_initcall(digsy_mtc_eeprom_devices_init);
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
new file mode 100644
index 0000000..0c7ebb1
--- /dev/null
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -0,0 +1,410 @@
+/*
+ * Driver for 93xx46 EEPROMs
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/eeprom_93xx46.h>
+
+#define OP_START 0x4
+#define OP_WRITE (OP_START | 0x1)
+#define OP_READ (OP_START | 0x2)
+#define ADDR_EWDS 0x00
+#define ADDR_ERAL 0x20
+#define ADDR_EWEN 0x30
+
+struct eeprom_93xx46_dev {
+ struct spi_device *spi;
+ struct eeprom_93xx46_platform_data *pdata;
+ struct bin_attribute bin;
+ struct mutex lock;
+ int addrlen;
+};
+
+static ssize_t
+eeprom_93xx46_bin_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct eeprom_93xx46_dev *edev;
+ struct device *dev;
+ struct spi_message m;
+ struct spi_transfer t[2];
+ int bits, ret;
+ u16 cmd_addr;
+
+ dev = container_of(kobj, struct device, kobj);
+ edev = dev_get_drvdata(dev);
+
+ if (unlikely(off >= edev->bin.size))
+ return 0;
+ if ((off + count) > edev->bin.size)
+ count = edev->bin.size - off;
+ if (unlikely(!count))
+ return count;
+
+ cmd_addr = OP_READ << edev->addrlen;
+
+ if (edev->addrlen == 7) {
+ cmd_addr |= off & 0x7f;
+ bits = 10;
+ } else {
+ cmd_addr |= off & 0x3f;
+ bits = 9;
+ }
+
+ dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
+ cmd_addr, edev->spi->max_speed_hz);
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = (char *)&cmd_addr;
+ t[0].len = 2;
+ t[0].bits_per_word = bits;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = count;
+ t[1].bits_per_word = 8;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&edev->lock);
+
+ if (edev->pdata->prepare)
+ edev->pdata->prepare(edev);
+
+ ret = spi_sync(edev->spi, &m);
+ /* have to wait at least Tcsl ns */
+ ndelay(250);
+ if (ret) {
+ dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n",
+ count, (int)off, ret);
+ }
+
+ if (edev->pdata->finish)
+ edev->pdata->finish(edev);
+
+ mutex_unlock(&edev->lock);
+ return ret ? : count;
+}
+
+static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on)
+{
+ struct spi_message m;
+ struct spi_transfer t;
+ int bits, ret;
+ u16 cmd_addr;
+
+ cmd_addr = OP_START << edev->addrlen;
+ if (edev->addrlen == 7) {
+ cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS) << 1;
+ bits = 10;
+ } else {
+ cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS);
+ bits = 9;
+ }
+
+ dev_dbg(&edev->spi->dev, "ew cmd 0x%04x\n", cmd_addr);
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(t));
+
+ t.tx_buf = &cmd_addr;
+ t.len = 2;
+ t.bits_per_word = bits;
+ spi_message_add_tail(&t, &m);
+
+ mutex_lock(&edev->lock);
+
+ if (edev->pdata->prepare)
+ edev->pdata->prepare(edev);
+
+ ret = spi_sync(edev->spi, &m);
+ /* have to wait at least Tcsl ns */
+ ndelay(250);
+ if (ret)
+ dev_err(&edev->spi->dev, "erase/write %sable error %d\n",
+ is_on ? "en" : "dis", ret);
+
+ if (edev->pdata->finish)
+ edev->pdata->finish(edev);
+
+ mutex_unlock(&edev->lock);
+ return ret;
+}
+
+static ssize_t
+eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev,
+ const char *buf, unsigned off)
+{
+ struct spi_message m;
+ struct spi_transfer t[2];
+ int bits, data_len, ret;
+ u16 cmd_addr;
+
+ cmd_addr = OP_WRITE << edev->addrlen;
+
+ if (edev->addrlen == 7) {
+ cmd_addr |= off & 0x7f;
+ bits = 10;
+ data_len = 1;
+ } else {
+ cmd_addr |= off & 0x3f;
+ bits = 9;
+ data_len = 2;
+ }
+
+ dev_dbg(&edev->spi->dev, "write cmd 0x%x\n", cmd_addr);
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = (char *)&cmd_addr;
+ t[0].len = 2;
+ t[0].bits_per_word = bits;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = data_len;
+ t[1].bits_per_word = 8;
+ spi_message_add_tail(&t[1], &m);
+
+ ret = spi_sync(edev->spi, &m);
+ /* have to wait program cycle time Twc ms */
+ mdelay(6);
+ return ret;
+}
+
+static ssize_t
+eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct eeprom_93xx46_dev *edev;
+ struct device *dev;
+ int i, ret, step = 1;
+
+ dev = container_of(kobj, struct device, kobj);
+ edev = dev_get_drvdata(dev);
+
+ if (unlikely(off >= edev->bin.size))
+ return 0;
+ if ((off + count) > edev->bin.size)
+ count = edev->bin.size - off;
+ if (unlikely(!count))
+ return count;
+
+ /* only write even number of bytes on 16-bit devices */
+ if (edev->addrlen == 6) {
+ step = 2;
+ count &= ~1;
+ }
+
+ /* erase/write enable */
+ ret = eeprom_93xx46_ew(edev, 1);
+ if (ret)
+ return ret;
+
+ mutex_lock(&edev->lock);
+
+ if (edev->pdata->prepare)
+ edev->pdata->prepare(edev);
+
+ for (i = 0; i < count; i += step) {
+ ret = eeprom_93xx46_write_word(edev, &buf[i], off + i);
+ if (ret) {
+ dev_err(&edev->spi->dev, "write failed at %d: %d\n",
+ (int)off + i, ret);
+ break;
+ }
+ }
+
+ if (edev->pdata->finish)
+ edev->pdata->finish(edev);
+
+ mutex_unlock(&edev->lock);
+
+ /* erase/write disable */
+ eeprom_93xx46_ew(edev, 0);
+ return ret ? : count;
+}
+
+static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev)
+{
+ struct eeprom_93xx46_platform_data *pd = edev->pdata;
+ struct spi_message m;
+ struct spi_transfer t;
+ int bits, ret;
+ u16 cmd_addr;
+
+ cmd_addr = OP_START << edev->addrlen;
+ if (edev->addrlen == 7) {
+ cmd_addr |= ADDR_ERAL << 1;
+ bits = 10;
+ } else {
+ cmd_addr |= ADDR_ERAL;
+ bits = 9;
+ }
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(t));
+
+ t.tx_buf = &cmd_addr;
+ t.len = 2;
+ t.bits_per_word = bits;
+ spi_message_add_tail(&t, &m);
+
+ mutex_lock(&edev->lock);
+
+ if (edev->pdata->prepare)
+ edev->pdata->prepare(edev);
+
+ ret = spi_sync(edev->spi, &m);
+ if (ret)
+ dev_err(&edev->spi->dev, "erase error %d\n", ret);
+ /* have to wait erase cycle time Tec ms */
+ mdelay(6);
+
+ if (pd->finish)
+ pd->finish(edev);
+
+ mutex_unlock(&edev->lock);
+ return ret;
+}
+
+static ssize_t eeprom_93xx46_store_erase(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct eeprom_93xx46_dev *edev = dev_get_drvdata(dev);
+ int erase = 0, ret;
+
+ sscanf(buf, "%d", &erase);
+ if (erase) {
+ ret = eeprom_93xx46_ew(edev, 1);
+ if (ret)
+ return ret;
+ ret = eeprom_93xx46_eral(edev);
+ if (ret)
+ return ret;
+ ret = eeprom_93xx46_ew(edev, 0);
+ if (ret)
+ return ret;
+ }
+ return count;
+}
+static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
+
+static int __devinit eeprom_93xx46_probe(struct spi_device *spi)
+{
+ struct eeprom_93xx46_platform_data *pd;
+ struct eeprom_93xx46_dev *edev;
+ int err;
+
+ pd = spi->dev.platform_data;
+ if (!pd) {
+ dev_err(&spi->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+ if (!edev)
+ return -ENOMEM;
+
+ if (pd->flags & EE_ADDR8)
+ edev->addrlen = 7;
+ else if (pd->flags & EE_ADDR16)
+ edev->addrlen = 6;
+ else {
+ dev_err(&spi->dev, "unspecified address type\n");
+ err = -EINVAL;
+ goto fail;
+ }
+
+ mutex_init(&edev->lock);
+
+ edev->spi = spi_dev_get(spi);
+ edev->pdata = pd;
+
+ sysfs_bin_attr_init(&edev->bin);
+ edev->bin.attr.name = "eeprom";
+ edev->bin.attr.mode = S_IRUSR;
+ edev->bin.read = eeprom_93xx46_bin_read;
+ edev->bin.size = 128;
+ if (!(pd->flags & EE_READONLY)) {
+ edev->bin.write = eeprom_93xx46_bin_write;
+ edev->bin.attr.mode |= S_IWUSR;
+ }
+
+ err = sysfs_create_bin_file(&spi->dev.kobj, &edev->bin);
+ if (err)
+ goto fail;
+
+ dev_info(&spi->dev, "%d-bit eeprom %s\n",
+ (pd->flags & EE_ADDR8) ? 8 : 16,
+ (pd->flags & EE_READONLY) ? "(readonly)" : "");
+
+ if (!(pd->flags & EE_READONLY)) {
+ if (device_create_file(&spi->dev, &dev_attr_erase))
+ dev_err(&spi->dev, "can't create erase interface\n");
+ }
+
+ dev_set_drvdata(&spi->dev, edev);
+ return 0;
+fail:
+ kfree(edev);
+ return err;
+}
+
+static int __devexit eeprom_93xx46_remove(struct spi_device *spi)
+{
+ struct eeprom_93xx46_dev *edev = dev_get_drvdata(&spi->dev);
+
+ if (!(edev->pdata->flags & EE_READONLY))
+ device_remove_file(&spi->dev, &dev_attr_erase);
+
+ sysfs_remove_bin_file(&spi->dev.kobj, &edev->bin);
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(edev);
+ return 0;
+}
+
+static struct spi_driver eeprom_93xx46_driver = {
+ .driver = {
+ .name = "93xx46",
+ .owner = THIS_MODULE,
+ },
+ .probe = eeprom_93xx46_probe,
+ .remove = __devexit_p(eeprom_93xx46_remove),
+};
+
+static int __init eeprom_93xx46_init(void)
+{
+ return spi_register_driver(&eeprom_93xx46_driver);
+}
+module_init(eeprom_93xx46_init);
+
+static void __exit eeprom_93xx46_exit(void)
+{
+ spi_unregister_driver(&eeprom_93xx46_driver);
+}
+module_exit(eeprom_93xx46_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for 93xx46 EEPROMs");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
+MODULE_ALIAS("spi:93xx46");
diff --git a/drivers/misc/fsa9480.c b/drivers/misc/fsa9480.c
new file mode 100644
index 0000000..5325a7e
--- /dev/null
+++ b/drivers/misc/fsa9480.c
@@ -0,0 +1,557 @@
+/*
+ * fsa9480.c - FSA9480 micro USB switch device driver
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Wonguk Jeong <wonguk.jeong@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/fsa9480.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+/* FSA9480 I2C registers */
+#define FSA9480_REG_DEVID 0x01
+#define FSA9480_REG_CTRL 0x02
+#define FSA9480_REG_INT1 0x03
+#define FSA9480_REG_INT2 0x04
+#define FSA9480_REG_INT1_MASK 0x05
+#define FSA9480_REG_INT2_MASK 0x06
+#define FSA9480_REG_ADC 0x07
+#define FSA9480_REG_TIMING1 0x08
+#define FSA9480_REG_TIMING2 0x09
+#define FSA9480_REG_DEV_T1 0x0a
+#define FSA9480_REG_DEV_T2 0x0b
+#define FSA9480_REG_BTN1 0x0c
+#define FSA9480_REG_BTN2 0x0d
+#define FSA9480_REG_CK 0x0e
+#define FSA9480_REG_CK_INT1 0x0f
+#define FSA9480_REG_CK_INT2 0x10
+#define FSA9480_REG_CK_INTMASK1 0x11
+#define FSA9480_REG_CK_INTMASK2 0x12
+#define FSA9480_REG_MANSW1 0x13
+#define FSA9480_REG_MANSW2 0x14
+
+/* Control */
+#define CON_SWITCH_OPEN (1 << 4)
+#define CON_RAW_DATA (1 << 3)
+#define CON_MANUAL_SW (1 << 2)
+#define CON_WAIT (1 << 1)
+#define CON_INT_MASK (1 << 0)
+#define CON_MASK (CON_SWITCH_OPEN | CON_RAW_DATA | \
+ CON_MANUAL_SW | CON_WAIT)
+
+/* Device Type 1 */
+#define DEV_USB_OTG (1 << 7)
+#define DEV_DEDICATED_CHG (1 << 6)
+#define DEV_USB_CHG (1 << 5)
+#define DEV_CAR_KIT (1 << 4)
+#define DEV_UART (1 << 3)
+#define DEV_USB (1 << 2)
+#define DEV_AUDIO_2 (1 << 1)
+#define DEV_AUDIO_1 (1 << 0)
+
+#define DEV_T1_USB_MASK (DEV_USB_OTG | DEV_USB)
+#define DEV_T1_UART_MASK (DEV_UART)
+#define DEV_T1_CHARGER_MASK (DEV_DEDICATED_CHG | DEV_USB_CHG)
+
+/* Device Type 2 */
+#define DEV_AV (1 << 6)
+#define DEV_TTY (1 << 5)
+#define DEV_PPD (1 << 4)
+#define DEV_JIG_UART_OFF (1 << 3)
+#define DEV_JIG_UART_ON (1 << 2)
+#define DEV_JIG_USB_OFF (1 << 1)
+#define DEV_JIG_USB_ON (1 << 0)
+
+#define DEV_T2_USB_MASK (DEV_JIG_USB_OFF | DEV_JIG_USB_ON)
+#define DEV_T2_UART_MASK (DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
+#define DEV_T2_JIG_MASK (DEV_JIG_USB_OFF | DEV_JIG_USB_ON | \
+ DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
+
+/*
+ * Manual Switch
+ * D- [7:5] / D+ [4:2]
+ * 000: Open all / 001: USB / 010: AUDIO / 011: UART / 100: V_AUDIO
+ */
+#define SW_VAUDIO ((4 << 5) | (4 << 2))
+#define SW_UART ((3 << 5) | (3 << 2))
+#define SW_AUDIO ((2 << 5) | (2 << 2))
+#define SW_DHOST ((1 << 5) | (1 << 2))
+#define SW_AUTO ((0 << 5) | (0 << 2))
+
+/* Interrupt 1 */
+#define INT_DETACH (1 << 1)
+#define INT_ATTACH (1 << 0)
+
+struct fsa9480_usbsw {
+ struct i2c_client *client;
+ struct fsa9480_platform_data *pdata;
+ int dev1;
+ int dev2;
+ int mansw;
+};
+
+static struct fsa9480_usbsw *chip;
+
+static int fsa9480_write_reg(struct i2c_client *client,
+ int reg, int value)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, reg, value);
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+ return ret;
+}
+
+static int fsa9480_read_reg(struct i2c_client *client, int reg)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+ return ret;
+}
+
+static int fsa9480_read_irq(struct i2c_client *client, int *value)
+{
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(client,
+ FSA9480_REG_INT1, 2, (u8 *)value);
+ *value &= 0xffff;
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+ return ret;
+}
+
+static void fsa9480_set_switch(const char *buf)
+{
+ struct fsa9480_usbsw *usbsw = chip;
+ struct i2c_client *client = usbsw->client;
+ unsigned int value;
+ unsigned int path = 0;
+
+ value = fsa9480_read_reg(client, FSA9480_REG_CTRL);
+
+ if (!strncmp(buf, "VAUDIO", 6)) {
+ path = SW_VAUDIO;
+ value &= ~CON_MANUAL_SW;
+ } else if (!strncmp(buf, "UART", 4)) {
+ path = SW_UART;
+ value &= ~CON_MANUAL_SW;
+ } else if (!strncmp(buf, "AUDIO", 5)) {
+ path = SW_AUDIO;
+ value &= ~CON_MANUAL_SW;
+ } else if (!strncmp(buf, "DHOST", 5)) {
+ path = SW_DHOST;
+ value &= ~CON_MANUAL_SW;
+ } else if (!strncmp(buf, "AUTO", 4)) {
+ path = SW_AUTO;
+ value |= CON_MANUAL_SW;
+ } else {
+ printk(KERN_ERR "Wrong command\n");
+ return;
+ }
+
+ usbsw->mansw = path;
+ fsa9480_write_reg(client, FSA9480_REG_MANSW1, path);
+ fsa9480_write_reg(client, FSA9480_REG_CTRL, value);
+}
+
+static ssize_t fsa9480_get_switch(char *buf)
+{
+ struct fsa9480_usbsw *usbsw = chip;
+ struct i2c_client *client = usbsw->client;
+ unsigned int value;
+
+ value = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
+
+ if (value == SW_VAUDIO)
+ return sprintf(buf, "VAUDIO\n");
+ else if (value == SW_UART)
+ return sprintf(buf, "UART\n");
+ else if (value == SW_AUDIO)
+ return sprintf(buf, "AUDIO\n");
+ else if (value == SW_DHOST)
+ return sprintf(buf, "DHOST\n");
+ else if (value == SW_AUTO)
+ return sprintf(buf, "AUTO\n");
+ else
+ return sprintf(buf, "%x", value);
+}
+
+static ssize_t fsa9480_show_device(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct fsa9480_usbsw *usbsw = dev_get_drvdata(dev);
+ struct i2c_client *client = usbsw->client;
+ int dev1, dev2;
+
+ dev1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
+ dev2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
+
+ if (!dev1 && !dev2)
+ return sprintf(buf, "NONE\n");
+
+ /* USB */
+ if (dev1 & DEV_T1_USB_MASK || dev2 & DEV_T2_USB_MASK)
+ return sprintf(buf, "USB\n");
+
+ /* UART */
+ if (dev1 & DEV_T1_UART_MASK || dev2 & DEV_T2_UART_MASK)
+ return sprintf(buf, "UART\n");
+
+ /* CHARGER */
+ if (dev1 & DEV_T1_CHARGER_MASK)
+ return sprintf(buf, "CHARGER\n");
+
+ /* JIG */
+ if (dev2 & DEV_T2_JIG_MASK)
+ return sprintf(buf, "JIG\n");
+
+ return sprintf(buf, "UNKNOWN\n");
+}
+
+static ssize_t fsa9480_show_manualsw(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return fsa9480_get_switch(buf);
+
+}
+
+static ssize_t fsa9480_set_manualsw(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ fsa9480_set_switch(buf);
+
+ return count;
+}
+
+static DEVICE_ATTR(device, S_IRUGO, fsa9480_show_device, NULL);
+static DEVICE_ATTR(switch, S_IRUGO | S_IWUSR,
+ fsa9480_show_manualsw, fsa9480_set_manualsw);
+
+static struct attribute *fsa9480_attributes[] = {
+ &dev_attr_device.attr,
+ &dev_attr_switch.attr,
+ NULL
+};
+
+static const struct attribute_group fsa9480_group = {
+ .attrs = fsa9480_attributes,
+};
+
+static void fsa9480_detect_dev(struct fsa9480_usbsw *usbsw, int intr)
+{
+ int val1, val2, ctrl;
+ struct fsa9480_platform_data *pdata = usbsw->pdata;
+ struct i2c_client *client = usbsw->client;
+
+ val1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
+ val2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
+ ctrl = fsa9480_read_reg(client, FSA9480_REG_CTRL);
+
+ dev_info(&client->dev, "intr: 0x%x, dev1: 0x%x, dev2: 0x%x\n",
+ intr, val1, val2);
+
+ if (!intr)
+ goto out;
+
+ if (intr & INT_ATTACH) { /* Attached */
+ /* USB */
+ if (val1 & DEV_T1_USB_MASK || val2 & DEV_T2_USB_MASK) {
+ if (pdata->usb_cb)
+ pdata->usb_cb(FSA9480_ATTACHED);
+
+ if (usbsw->mansw) {
+ fsa9480_write_reg(client,
+ FSA9480_REG_MANSW1, usbsw->mansw);
+ }
+ }
+
+ /* UART */
+ if (val1 & DEV_T1_UART_MASK || val2 & DEV_T2_UART_MASK) {
+ if (pdata->uart_cb)
+ pdata->uart_cb(FSA9480_ATTACHED);
+
+ if (!(ctrl & CON_MANUAL_SW)) {
+ fsa9480_write_reg(client,
+ FSA9480_REG_MANSW1, SW_UART);
+ }
+ }
+
+ /* CHARGER */
+ if (val1 & DEV_T1_CHARGER_MASK) {
+ if (pdata->charger_cb)
+ pdata->charger_cb(FSA9480_ATTACHED);
+ }
+
+ /* JIG */
+ if (val2 & DEV_T2_JIG_MASK) {
+ if (pdata->jig_cb)
+ pdata->jig_cb(FSA9480_ATTACHED);
+ }
+ } else if (intr & INT_DETACH) { /* Detached */
+ /* USB */
+ if (usbsw->dev1 & DEV_T1_USB_MASK ||
+ usbsw->dev2 & DEV_T2_USB_MASK) {
+ if (pdata->usb_cb)
+ pdata->usb_cb(FSA9480_DETACHED);
+ }
+
+ /* UART */
+ if (usbsw->dev1 & DEV_T1_UART_MASK ||
+ usbsw->dev2 & DEV_T2_UART_MASK) {
+ if (pdata->uart_cb)
+ pdata->uart_cb(FSA9480_DETACHED);
+ }
+
+ /* CHARGER */
+ if (usbsw->dev1 & DEV_T1_CHARGER_MASK) {
+ if (pdata->charger_cb)
+ pdata->charger_cb(FSA9480_DETACHED);
+ }
+
+ /* JIG */
+ if (usbsw->dev2 & DEV_T2_JIG_MASK) {
+ if (pdata->jig_cb)
+ pdata->jig_cb(FSA9480_DETACHED);
+ }
+ }
+
+ usbsw->dev1 = val1;
+ usbsw->dev2 = val2;
+
+out:
+ ctrl &= ~CON_INT_MASK;
+ fsa9480_write_reg(client, FSA9480_REG_CTRL, ctrl);
+}
+
+static irqreturn_t fsa9480_irq_handler(int irq, void *data)
+{
+ struct fsa9480_usbsw *usbsw = data;
+ struct i2c_client *client = usbsw->client;
+ int intr;
+
+ /* clear interrupt */
+ fsa9480_read_irq(client, &intr);
+
+ /* device detection */
+ fsa9480_detect_dev(usbsw, intr);
+
+ return IRQ_HANDLED;
+}
+
+static int fsa9480_irq_init(struct fsa9480_usbsw *usbsw)
+{
+ struct fsa9480_platform_data *pdata = usbsw->pdata;
+ struct i2c_client *client = usbsw->client;
+ int ret;
+ int intr;
+ unsigned int ctrl = CON_MASK;
+
+ /* clear interrupt */
+ fsa9480_read_irq(client, &intr);
+
+ /* unmask interrupt (attach/detach only) */
+ fsa9480_write_reg(client, FSA9480_REG_INT1_MASK, 0xfc);
+ fsa9480_write_reg(client, FSA9480_REG_INT2_MASK, 0x1f);
+
+ usbsw->mansw = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
+
+ if (usbsw->mansw)
+ ctrl &= ~CON_MANUAL_SW; /* Manual Switching Mode */
+
+ fsa9480_write_reg(client, FSA9480_REG_CTRL, ctrl);
+
+ if (pdata && pdata->cfg_gpio)
+ pdata->cfg_gpio();
+
+ if (client->irq) {
+ ret = request_threaded_irq(client->irq, NULL,
+ fsa9480_irq_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "fsa9480 micro USB", usbsw);
+ if (ret) {
+ dev_err(&client->dev, "failed to reqeust IRQ\n");
+ return ret;
+ }
+
+ device_init_wakeup(&client->dev, pdata->wakeup);
+ }
+
+ return 0;
+}
+
+static int __devinit fsa9480_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct fsa9480_usbsw *usbsw;
+ int ret = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ usbsw = kzalloc(sizeof(struct fsa9480_usbsw), GFP_KERNEL);
+ if (!usbsw) {
+ dev_err(&client->dev, "failed to allocate driver data\n");
+ return -ENOMEM;
+ }
+
+ usbsw->client = client;
+ usbsw->pdata = client->dev.platform_data;
+
+ chip = usbsw;
+
+ i2c_set_clientdata(client, usbsw);
+
+ ret = fsa9480_irq_init(usbsw);
+ if (ret)
+ goto fail1;
+
+ ret = sysfs_create_group(&client->dev.kobj, &fsa9480_group);
+ if (ret) {
+ dev_err(&client->dev,
+ "failed to create fsa9480 attribute group\n");
+ goto fail2;
+ }
+
+ /* ADC Detect Time: 500ms */
+ fsa9480_write_reg(client, FSA9480_REG_TIMING1, 0x6);
+
+ if (chip->pdata->reset_cb)
+ chip->pdata->reset_cb();
+
+ /* device detection */
+ fsa9480_detect_dev(usbsw, INT_ATTACH);
+
+ pm_runtime_set_active(&client->dev);
+
+ return 0;
+
+fail2:
+ if (client->irq)
+ free_irq(client->irq, NULL);
+fail1:
+ i2c_set_clientdata(client, NULL);
+ kfree(usbsw);
+ return ret;
+}
+
+static int __devexit fsa9480_remove(struct i2c_client *client)
+{
+ struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
+ if (client->irq)
+ free_irq(client->irq, NULL);
+ i2c_set_clientdata(client, NULL);
+
+ sysfs_remove_group(&client->dev.kobj, &fsa9480_group);
+ device_init_wakeup(&client->dev, 0);
+ kfree(usbsw);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int fsa9480_suspend(struct i2c_client *client, pm_message_t state)
+{
+ struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
+ struct fsa9480_platform_data *pdata = usbsw->pdata;
+
+ if (device_may_wakeup(&client->dev) && client->irq)
+ enable_irq_wake(client->irq);
+
+ if (pdata->usb_power)
+ pdata->usb_power(0);
+
+ return 0;
+}
+
+static int fsa9480_resume(struct i2c_client *client)
+{
+ struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
+ int dev1, dev2;
+
+ if (device_may_wakeup(&client->dev) && client->irq)
+ disable_irq_wake(client->irq);
+
+ /*
+ * Clear Pending interrupt. Note that detect_dev does what
+ * the interrupt handler does. So, we don't miss pending and
+ * we reenable interrupt if there is one.
+ */
+ fsa9480_read_reg(client, FSA9480_REG_INT1);
+ fsa9480_read_reg(client, FSA9480_REG_INT2);
+
+ dev1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
+ dev2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
+
+ /* device detection */
+ fsa9480_detect_dev(usbsw, (dev1 || dev2) ? INT_ATTACH : INT_DETACH);
+
+ return 0;
+}
+
+#else
+
+#define fsa9480_suspend NULL
+#define fsa9480_resume NULL
+
+#endif /* CONFIG_PM */
+
+static const struct i2c_device_id fsa9480_id[] = {
+ {"fsa9480", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, fsa9480_id);
+
+static struct i2c_driver fsa9480_i2c_driver = {
+ .driver = {
+ .name = "fsa9480",
+ },
+ .probe = fsa9480_probe,
+ .remove = __devexit_p(fsa9480_remove),
+ .resume = fsa9480_resume,
+ .suspend = fsa9480_suspend,
+ .id_table = fsa9480_id,
+};
+
+static int __init fsa9480_init(void)
+{
+ return i2c_add_driver(&fsa9480_i2c_driver);
+}
+module_init(fsa9480_init);
+
+static void __exit fsa9480_exit(void)
+{
+ i2c_del_driver(&fsa9480_i2c_driver);
+}
+module_exit(fsa9480_exit);
+
+MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>");
+MODULE_DESCRIPTION("FSA9480 USB Switch driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 5fe79df..01eb67b 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -686,6 +686,8 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
}
if (id->driver_data == 1) { /* EG20T PCH */
+ const char *board_name;
+
retval = sysfs_create_file(&pdev->dev.kobj,
&dev_attr_pch_mac.attr);
if (retval)
@@ -701,7 +703,8 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
CLKCFG_CANCLK_MASK);
/* quirk for CM-iTC board */
- if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ if (board_name && strstr(board_name, "CM-iTC"))
pch_phub_read_modify_write_reg(chip,
(unsigned int)CLKCFG_REG_OFFSET,
CLKCFG_UART_48MHZ | CLKCFG_BAUDDIV |
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f091b43..89bdeae 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -23,6 +23,7 @@
#include <linux/log2.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
+#include <linux/suspend.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 1a6937d9..bbf3edd 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -509,15 +509,15 @@ static __init void pnpacpi_parse_dma_option(struct pnp_dev *dev,
struct acpi_resource_dma *p)
{
int i;
- unsigned char map = 0, flags;
+ unsigned char map = 0, flags = 0;
if (p->channel_count == 0)
- return;
+ flags |= IORESOURCE_DISABLED;
for (i = 0; i < p->channel_count; i++)
map |= 1 << p->channels[i];
- flags = dma_flags(dev, p->type, p->bus_master, p->transfer);
+ flags |= dma_flags(dev, p->type, p->bus_master, p->transfer);
pnp_register_dma_resource(dev, option_flags, map, flags);
}
@@ -527,17 +527,17 @@ static __init void pnpacpi_parse_irq_option(struct pnp_dev *dev,
{
int i;
pnp_irq_mask_t map;
- unsigned char flags;
+ unsigned char flags = 0;
if (p->interrupt_count == 0)
- return;
+ flags |= IORESOURCE_DISABLED;
bitmap_zero(map.bits, PNP_IRQ_NR);
for (i = 0; i < p->interrupt_count; i++)
if (p->interrupts[i])
__set_bit(p->interrupts[i], map.bits);
- flags = irq_flags(p->triggering, p->polarity, p->sharable);
+ flags |= irq_flags(p->triggering, p->polarity, p->sharable);
pnp_register_irq_resource(dev, option_flags, &map, flags);
}
@@ -547,10 +547,10 @@ static __init void pnpacpi_parse_ext_irq_option(struct pnp_dev *dev,
{
int i;
pnp_irq_mask_t map;
- unsigned char flags;
+ unsigned char flags = 0;
if (p->interrupt_count == 0)
- return;
+ flags |= IORESOURCE_DISABLED;
bitmap_zero(map.bits, PNP_IRQ_NR);
for (i = 0; i < p->interrupt_count; i++) {
@@ -564,7 +564,7 @@ static __init void pnpacpi_parse_ext_irq_option(struct pnp_dev *dev,
}
}
- flags = irq_flags(p->triggering, p->polarity, p->sharable);
+ flags |= irq_flags(p->triggering, p->polarity, p->sharable);
pnp_register_irq_resource(dev, option_flags, &map, flags);
}
@@ -575,10 +575,10 @@ static __init void pnpacpi_parse_port_option(struct pnp_dev *dev,
unsigned char flags = 0;
if (io->address_length == 0)
- return;
+ flags |= IORESOURCE_DISABLED;
if (io->io_decode == ACPI_DECODE_16)
- flags = IORESOURCE_IO_16BIT_ADDR;
+ flags |= IORESOURCE_IO_16BIT_ADDR;
pnp_register_port_resource(dev, option_flags, io->minimum, io->maximum,
io->alignment, io->address_length, flags);
}
@@ -587,11 +587,13 @@ static __init void pnpacpi_parse_fixed_port_option(struct pnp_dev *dev,
unsigned int option_flags,
struct acpi_resource_fixed_io *io)
{
+ unsigned char flags = 0;
+
if (io->address_length == 0)
- return;
+ flags |= IORESOURCE_DISABLED;
pnp_register_port_resource(dev, option_flags, io->address, io->address,
- 0, io->address_length, IORESOURCE_IO_FIXED);
+ 0, io->address_length, flags | IORESOURCE_IO_FIXED);
}
static __init void pnpacpi_parse_mem24_option(struct pnp_dev *dev,
@@ -601,10 +603,10 @@ static __init void pnpacpi_parse_mem24_option(struct pnp_dev *dev,
unsigned char flags = 0;
if (p->address_length == 0)
- return;
+ flags |= IORESOURCE_DISABLED;
if (p->write_protect == ACPI_READ_WRITE_MEMORY)
- flags = IORESOURCE_MEM_WRITEABLE;
+ flags |= IORESOURCE_MEM_WRITEABLE;
pnp_register_mem_resource(dev, option_flags, p->minimum, p->maximum,
p->alignment, p->address_length, flags);
}
@@ -616,10 +618,10 @@ static __init void pnpacpi_parse_mem32_option(struct pnp_dev *dev,
unsigned char flags = 0;
if (p->address_length == 0)
- return;
+ flags |= IORESOURCE_DISABLED;
if (p->write_protect == ACPI_READ_WRITE_MEMORY)
- flags = IORESOURCE_MEM_WRITEABLE;
+ flags |= IORESOURCE_MEM_WRITEABLE;
pnp_register_mem_resource(dev, option_flags, p->minimum, p->maximum,
p->alignment, p->address_length, flags);
}
@@ -631,10 +633,10 @@ static __init void pnpacpi_parse_fixed_mem32_option(struct pnp_dev *dev,
unsigned char flags = 0;
if (p->address_length == 0)
- return;
+ flags |= IORESOURCE_DISABLED;
if (p->write_protect == ACPI_READ_WRITE_MEMORY)
- flags = IORESOURCE_MEM_WRITEABLE;
+ flags |= IORESOURCE_MEM_WRITEABLE;
pnp_register_mem_resource(dev, option_flags, p->address, p->address,
0, p->address_length, flags);
}
@@ -655,18 +657,18 @@ static __init void pnpacpi_parse_address_option(struct pnp_dev *dev,
}
if (p->address_length == 0)
- return;
+ flags |= IORESOURCE_DISABLED;
if (p->resource_type == ACPI_MEMORY_RANGE) {
if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
- flags = IORESOURCE_MEM_WRITEABLE;
+ flags |= IORESOURCE_MEM_WRITEABLE;
pnp_register_mem_resource(dev, option_flags, p->minimum,
p->minimum, 0, p->address_length,
flags);
} else if (p->resource_type == ACPI_IO_RANGE)
pnp_register_port_resource(dev, option_flags, p->minimum,
p->minimum, 0, p->address_length,
- IORESOURCE_IO_FIXED);
+ flags | IORESOURCE_IO_FIXED);
}
static __init void pnpacpi_parse_ext_address_option(struct pnp_dev *dev,
@@ -677,18 +679,18 @@ static __init void pnpacpi_parse_ext_address_option(struct pnp_dev *dev,
unsigned char flags = 0;
if (p->address_length == 0)
- return;
+ flags |= IORESOURCE_DISABLED;
if (p->resource_type == ACPI_MEMORY_RANGE) {
if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
- flags = IORESOURCE_MEM_WRITEABLE;
+ flags |= IORESOURCE_MEM_WRITEABLE;
pnp_register_mem_resource(dev, option_flags, p->minimum,
p->minimum, 0, p->address_length,
flags);
} else if (p->resource_type == ACPI_IO_RANGE)
pnp_register_port_resource(dev, option_flags, p->minimum,
p->minimum, 0, p->address_length,
- IORESOURCE_IO_FIXED);
+ flags | IORESOURCE_IO_FIXED);
}
struct acpipnp_parse_option_s {
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index dcb61e2..5a538fc 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1006,10 +1006,10 @@ config RTC_DRV_MC13XXX
config RTC_DRV_MPC5121
tristate "Freescale MPC5121 built-in RTC"
- depends on PPC_MPC512x && RTC_CLASS
+ depends on PPC_MPC512x || PPC_MPC52xx
help
If you say yes here you will get support for the
- built-in RTC MPC5121.
+ built-in RTC on MPC5121 or on MPC5200.
This driver can also be built as a module. If so, the module
will be called rtc-mpc5121.
@@ -1034,6 +1034,16 @@ config RTC_DRV_LPC32XX
This driver can also be buillt as a module. If so, the module
will be called rtc-lpc32xx.
+config RTC_DRV_PM8XXX
+ tristate "Qualcomm PMIC8XXX RTC"
+ depends on MFD_PM8XXX
+ help
+ If you say yes here you get support for the
+ Qualcomm PMIC8XXX RTC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-pm8xxx.
+
config RTC_DRV_TEGRA
tristate "NVIDIA Tegra Internal RTC driver"
depends on RTC_CLASS && ARCH_TEGRA
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 0ffefe8..6e69823 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_RTC_DRV_PCF2123) += rtc-pcf2123.o
obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o
obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
+obj-$(CONFIG_RTC_DRV_PM8XXX) += rtc-pm8xxx.o
obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o
obj-$(CONFIG_RTC_DRV_PUV3) += rtc-puv3.o
obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o
diff --git a/drivers/rtc/rtc-mpc5121.c b/drivers/rtc/rtc-mpc5121.c
index 09ccd8d..da60915 100644
--- a/drivers/rtc/rtc-mpc5121.c
+++ b/drivers/rtc/rtc-mpc5121.c
@@ -3,6 +3,7 @@
*
* Copyright 2007, Domen Puncer <domen.puncer@telargo.com>
* Copyright 2008, Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright 2011, Dmitry Eremin-Solenikov
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -145,6 +146,55 @@ static int mpc5121_rtc_set_time(struct device *dev, struct rtc_time *tm)
return 0;
}
+static int mpc5200_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+ struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+ int tmp;
+
+ tm->tm_sec = in_8(&regs->second);
+ tm->tm_min = in_8(&regs->minute);
+
+ /* 12 hour format? */
+ if (in_8(&regs->hour) & 0x20)
+ tm->tm_hour = (in_8(&regs->hour) >> 1) +
+ (in_8(&regs->hour) & 1 ? 12 : 0);
+ else
+ tm->tm_hour = in_8(&regs->hour);
+
+ tmp = in_8(&regs->wday_mday);
+ tm->tm_mday = tmp & 0x1f;
+ tm->tm_mon = in_8(&regs->month) - 1;
+ tm->tm_year = in_be16(&regs->year) - 1900;
+ tm->tm_wday = (tmp >> 5) % 7;
+ tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+ tm->tm_isdst = 0;
+
+ return 0;
+}
+
+static int mpc5200_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+ struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+ mpc5121_rtc_update_smh(regs, tm);
+
+ /* date */
+ out_8(&regs->month_set, tm->tm_mon + 1);
+ out_8(&regs->weekday_set, tm->tm_wday ? tm->tm_wday : 7);
+ out_8(&regs->date_set, tm->tm_mday);
+ out_be16(&regs->year_set, tm->tm_year + 1900);
+
+ /* set date sequence */
+ out_8(&regs->set_date, 0x1);
+ out_8(&regs->set_date, 0x3);
+ out_8(&regs->set_date, 0x1);
+ out_8(&regs->set_date, 0x0);
+
+ return 0;
+}
+
static int mpc5121_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
@@ -248,11 +298,18 @@ static const struct rtc_class_ops mpc5121_rtc_ops = {
.alarm_irq_enable = mpc5121_rtc_alarm_irq_enable,
};
+static const struct rtc_class_ops mpc5200_rtc_ops = {
+ .read_time = mpc5200_rtc_read_time,
+ .set_time = mpc5200_rtc_set_time,
+ .read_alarm = mpc5121_rtc_read_alarm,
+ .set_alarm = mpc5121_rtc_set_alarm,
+ .alarm_irq_enable = mpc5121_rtc_alarm_irq_enable,
+};
+
static int __devinit mpc5121_rtc_probe(struct platform_device *op)
{
struct mpc5121_rtc_data *rtc;
int err = 0;
- u32 ka;
rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
if (!rtc)
@@ -287,15 +344,22 @@ static int __devinit mpc5121_rtc_probe(struct platform_device *op)
goto out_dispose2;
}
- ka = in_be32(&rtc->regs->keep_alive);
- if (ka & 0x02) {
- dev_warn(&op->dev,
- "mpc5121-rtc: Battery or oscillator failure!\n");
- out_be32(&rtc->regs->keep_alive, ka);
+ if (of_device_is_compatible(op->dev.of_node, "fsl,mpc5121-rtc")) {
+ u32 ka;
+ ka = in_be32(&rtc->regs->keep_alive);
+ if (ka & 0x02) {
+ dev_warn(&op->dev,
+ "mpc5121-rtc: Battery or oscillator failure!\n");
+ out_be32(&rtc->regs->keep_alive, ka);
+ }
+
+ rtc->rtc = rtc_device_register("mpc5121-rtc", &op->dev,
+ &mpc5121_rtc_ops, THIS_MODULE);
+ } else {
+ rtc->rtc = rtc_device_register("mpc5200-rtc", &op->dev,
+ &mpc5200_rtc_ops, THIS_MODULE);
}
- rtc->rtc = rtc_device_register("mpc5121-rtc", &op->dev,
- &mpc5121_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtc)) {
err = PTR_ERR(rtc->rtc);
goto out_free_irq;
@@ -340,6 +404,7 @@ static int __devexit mpc5121_rtc_remove(struct platform_device *op)
static struct of_device_id mpc5121_rtc_match[] __devinitdata = {
{ .compatible = "fsl,mpc5121-rtc", },
+ { .compatible = "fsl,mpc5200-rtc", },
{},
};
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
new file mode 100644
index 0000000..d420e9d
--- /dev/null
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -0,0 +1,550 @@
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <linux/mfd/pm8xxx/core.h>
+#include <linux/mfd/pm8xxx/rtc.h>
+
+
+/* RTC Register offsets from RTC CTRL REG */
+#define PM8XXX_ALARM_CTRL_OFFSET 0x01
+#define PM8XXX_RTC_WRITE_OFFSET 0x02
+#define PM8XXX_RTC_READ_OFFSET 0x06
+#define PM8XXX_ALARM_RW_OFFSET 0x0A
+
+/* RTC_CTRL register bit fields */
+#define PM8xxx_RTC_ENABLE BIT(7)
+#define PM8xxx_RTC_ALARM_ENABLE BIT(1)
+#define PM8xxx_RTC_ALARM_CLEAR BIT(0)
+
+#define NUM_8_BIT_RTC_REGS 0x4
+
+/**
+ * struct pm8xxx_rtc - rtc driver internal structure
+ * @rtc: rtc device for this driver.
+ * @rtc_alarm_irq: rtc alarm irq number.
+ * @rtc_base: address of rtc control register.
+ * @rtc_read_base: base address of read registers.
+ * @rtc_write_base: base address of write registers.
+ * @alarm_rw_base: base address of alarm registers.
+ * @ctrl_reg: rtc control register.
+ * @rtc_dev: device structure.
+ * @ctrl_reg_lock: spinlock protecting access to ctrl_reg.
+ */
+struct pm8xxx_rtc {
+ struct rtc_device *rtc;
+ int rtc_alarm_irq;
+ int rtc_base;
+ int rtc_read_base;
+ int rtc_write_base;
+ int alarm_rw_base;
+ u8 ctrl_reg;
+ struct device *rtc_dev;
+ spinlock_t ctrl_reg_lock;
+};
+
+/*
+ * The RTC registers need to be read/written one byte at a time. This is a
+ * hardware limitation.
+ */
+static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
+ int base, int count)
+{
+ int i, rc;
+ struct device *parent = rtc_dd->rtc_dev->parent;
+
+ for (i = 0; i < count; i++) {
+ rc = pm8xxx_readb(parent, base + i, &rtc_val[i]);
+ if (rc < 0) {
+ dev_err(rtc_dd->rtc_dev, "PMIC read failed\n");
+ return rc;
+ }
+ }
+
+ return 0;
+}
+
+static int pm8xxx_write_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
+ int base, int count)
+{
+ int i, rc;
+ struct device *parent = rtc_dd->rtc_dev->parent;
+
+ for (i = 0; i < count; i++) {
+ rc = pm8xxx_writeb(parent, base + i, rtc_val[i]);
+ if (rc < 0) {
+ dev_err(rtc_dd->rtc_dev, "PMIC write failed\n");
+ return rc;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Steps to write the RTC registers.
+ * 1. Disable alarm if enabled.
+ * 2. Write 0x00 to LSB.
+ * 3. Write Byte[1], Byte[2], Byte[3] then Byte[0].
+ * 4. Enable alarm if disabled in step 1.
+ */
+static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ int rc, i;
+ unsigned long secs, irq_flags;
+ u8 value[NUM_8_BIT_RTC_REGS], reg = 0, alarm_enabled = 0, ctrl_reg;
+ struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ rtc_tm_to_time(tm, &secs);
+
+ for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
+ value[i] = secs & 0xFF;
+ secs >>= 8;
+ }
+
+ dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
+
+ spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+ ctrl_reg = rtc_dd->ctrl_reg;
+
+ if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) {
+ alarm_enabled = 1;
+ ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+ rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
+ 1);
+ if (rc < 0) {
+ dev_err(dev, "Write to RTC control register "
+ "failed\n");
+ goto rtc_rw_fail;
+ }
+ rtc_dd->ctrl_reg = ctrl_reg;
+ } else
+ spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+ /* Write 0 to Byte[0] */
+ reg = 0;
+ rc = pm8xxx_write_wrapper(rtc_dd, &reg, rtc_dd->rtc_write_base, 1);
+ if (rc < 0) {
+ dev_err(dev, "Write to RTC write data register failed\n");
+ goto rtc_rw_fail;
+ }
+
+ /* Write Byte[1], Byte[2], Byte[3] */
+ rc = pm8xxx_write_wrapper(rtc_dd, value + 1,
+ rtc_dd->rtc_write_base + 1, 3);
+ if (rc < 0) {
+ dev_err(dev, "Write to RTC write data register failed\n");
+ goto rtc_rw_fail;
+ }
+
+ /* Write Byte[0] */
+ rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->rtc_write_base, 1);
+ if (rc < 0) {
+ dev_err(dev, "Write to RTC write data register failed\n");
+ goto rtc_rw_fail;
+ }
+
+ if (alarm_enabled) {
+ ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
+ rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
+ 1);
+ if (rc < 0) {
+ dev_err(dev, "Write to RTC control register "
+ "failed\n");
+ goto rtc_rw_fail;
+ }
+ rtc_dd->ctrl_reg = ctrl_reg;
+ }
+
+rtc_rw_fail:
+ if (alarm_enabled)
+ spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+ return rc;
+}
+
+static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ int rc;
+ u8 value[NUM_8_BIT_RTC_REGS], reg;
+ unsigned long secs;
+ struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->rtc_read_base,
+ NUM_8_BIT_RTC_REGS);
+ if (rc < 0) {
+ dev_err(dev, "RTC read data register failed\n");
+ return rc;
+ }
+
+ /*
+ * Read the LSB again and check if there has been a carry over.
+ * If there is, redo the read operation.
+ */
+ rc = pm8xxx_read_wrapper(rtc_dd, &reg, rtc_dd->rtc_read_base, 1);
+ if (rc < 0) {
+ dev_err(dev, "RTC read data register failed\n");
+ return rc;
+ }
+
+ if (unlikely(reg < value[0])) {
+ rc = pm8xxx_read_wrapper(rtc_dd, value,
+ rtc_dd->rtc_read_base, NUM_8_BIT_RTC_REGS);
+ if (rc < 0) {
+ dev_err(dev, "RTC read data register failed\n");
+ return rc;
+ }
+ }
+
+ secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+
+ rtc_time_to_tm(secs, tm);
+
+ rc = rtc_valid_tm(tm);
+ if (rc < 0) {
+ dev_err(dev, "Invalid time read from RTC\n");
+ return rc;
+ }
+
+ dev_dbg(dev, "secs = %lu, h:m:s == %d:%d:%d, d/m/y = %d/%d/%d\n",
+ secs, tm->tm_hour, tm->tm_min, tm->tm_sec,
+ tm->tm_mday, tm->tm_mon, tm->tm_year);
+
+ return 0;
+}
+
+static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ int rc, i;
+ u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg;
+ unsigned long secs, irq_flags;
+ struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ rtc_tm_to_time(&alarm->time, &secs);
+
+ for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
+ value[i] = secs & 0xFF;
+ secs >>= 8;
+ }
+
+ spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+ rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
+ NUM_8_BIT_RTC_REGS);
+ if (rc < 0) {
+ dev_err(dev, "Write to RTC ALARM register failed\n");
+ goto rtc_rw_fail;
+ }
+
+ ctrl_reg = rtc_dd->ctrl_reg;
+ ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
+ (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
+
+ rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+ if (rc < 0) {
+ dev_err(dev, "Write to RTC control register failed\n");
+ goto rtc_rw_fail;
+ }
+
+ rtc_dd->ctrl_reg = ctrl_reg;
+
+ dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
+ alarm->time.tm_hour, alarm->time.tm_min,
+ alarm->time.tm_sec, alarm->time.tm_mday,
+ alarm->time.tm_mon, alarm->time.tm_year);
+rtc_rw_fail:
+ spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+ return rc;
+}
+
+static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ int rc;
+ u8 value[NUM_8_BIT_RTC_REGS];
+ unsigned long secs;
+ struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
+ NUM_8_BIT_RTC_REGS);
+ if (rc < 0) {
+ dev_err(dev, "RTC alarm time read failed\n");
+ return rc;
+ }
+
+ secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+
+ rtc_time_to_tm(secs, &alarm->time);
+
+ rc = rtc_valid_tm(&alarm->time);
+ if (rc < 0) {
+ dev_err(dev, "Invalid alarm time read from RTC\n");
+ return rc;
+ }
+
+ dev_dbg(dev, "Alarm set for - h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
+ alarm->time.tm_hour, alarm->time.tm_min,
+ alarm->time.tm_sec, alarm->time.tm_mday,
+ alarm->time.tm_mon, alarm->time.tm_year);
+
+ return 0;
+}
+
+static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+ int rc;
+ unsigned long irq_flags;
+ struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ u8 ctrl_reg;
+
+ spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+ ctrl_reg = rtc_dd->ctrl_reg;
+ ctrl_reg = (enable) ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
+ (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
+
+ rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+ if (rc < 0) {
+ dev_err(dev, "Write to RTC control register failed\n");
+ goto rtc_rw_fail;
+ }
+
+ rtc_dd->ctrl_reg = ctrl_reg;
+
+rtc_rw_fail:
+ spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+ return rc;
+}
+
+static struct rtc_class_ops pm8xxx_rtc_ops = {
+ .read_time = pm8xxx_rtc_read_time,
+ .set_alarm = pm8xxx_rtc_set_alarm,
+ .read_alarm = pm8xxx_rtc_read_alarm,
+ .alarm_irq_enable = pm8xxx_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
+{
+ struct pm8xxx_rtc *rtc_dd = dev_id;
+ u8 ctrl_reg;
+ int rc;
+ unsigned long irq_flags;
+
+ rtc_update_irq(rtc_dd->rtc, 1, RTC_IRQF | RTC_AF);
+
+ spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+ /* Clear the alarm enable bit */
+ ctrl_reg = rtc_dd->ctrl_reg;
+ ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+
+ rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+ if (rc < 0) {
+ spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+ dev_err(rtc_dd->rtc_dev, "Write to RTC control register "
+ "failed\n");
+ goto rtc_alarm_handled;
+ }
+
+ rtc_dd->ctrl_reg = ctrl_reg;
+ spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+ /* Clear RTC alarm register */
+ rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
+ PM8XXX_ALARM_CTRL_OFFSET, 1);
+ if (rc < 0) {
+ dev_err(rtc_dd->rtc_dev, "RTC Alarm control register read "
+ "failed\n");
+ goto rtc_alarm_handled;
+ }
+
+ ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
+ rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
+ PM8XXX_ALARM_CTRL_OFFSET, 1);
+ if (rc < 0)
+ dev_err(rtc_dd->rtc_dev, "Write to RTC Alarm control register"
+ " failed\n");
+
+rtc_alarm_handled:
+ return IRQ_HANDLED;
+}
+
+static int __devinit pm8xxx_rtc_probe(struct platform_device *pdev)
+{
+ int rc;
+ u8 ctrl_reg;
+ bool rtc_write_enable = false;
+ struct pm8xxx_rtc *rtc_dd;
+ struct resource *rtc_resource;
+ const struct pm8xxx_rtc_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
+
+ if (pdata != NULL)
+ rtc_write_enable = pdata->rtc_write_enable;
+
+ rtc_dd = kzalloc(sizeof(*rtc_dd), GFP_KERNEL);
+ if (rtc_dd == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate memory!\n");
+ return -ENOMEM;
+ }
+
+ /* Initialise spinlock to protect RTC control register */
+ spin_lock_init(&rtc_dd->ctrl_reg_lock);
+
+ rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0);
+ if (rtc_dd->rtc_alarm_irq < 0) {
+ dev_err(&pdev->dev, "Alarm IRQ resource absent!\n");
+ rc = -ENXIO;
+ goto fail_rtc_enable;
+ }
+
+ rtc_resource = platform_get_resource_byname(pdev, IORESOURCE_IO,
+ "pmic_rtc_base");
+ if (!(rtc_resource && rtc_resource->start)) {
+ dev_err(&pdev->dev, "RTC IO resource absent!\n");
+ rc = -ENXIO;
+ goto fail_rtc_enable;
+ }
+
+ rtc_dd->rtc_base = rtc_resource->start;
+
+ /* Setup RTC register addresses */
+ rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET;
+ rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET;
+ rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET;
+
+ rtc_dd->rtc_dev = &pdev->dev;
+
+ /* Check if the RTC is on, else turn it on */
+ rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "RTC control register read failed!\n");
+ goto fail_rtc_enable;
+ }
+
+ if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
+ ctrl_reg |= PM8xxx_RTC_ENABLE;
+ rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
+ 1);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Write to RTC control register "
+ "failed\n");
+ goto fail_rtc_enable;
+ }
+ }
+
+ rtc_dd->ctrl_reg = ctrl_reg;
+ if (rtc_write_enable == true)
+ pm8xxx_rtc_ops.set_time = pm8xxx_rtc_set_time;
+
+ platform_set_drvdata(pdev, rtc_dd);
+
+ /* Register the RTC device */
+ rtc_dd->rtc = rtc_device_register("pm8xxx_rtc", &pdev->dev,
+ &pm8xxx_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc_dd->rtc)) {
+ dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n",
+ __func__, PTR_ERR(rtc_dd->rtc));
+ rc = PTR_ERR(rtc_dd->rtc);
+ goto fail_rtc_enable;
+ }
+
+ /* Request the alarm IRQ */
+ rc = request_any_context_irq(rtc_dd->rtc_alarm_irq,
+ pm8xxx_alarm_trigger, IRQF_TRIGGER_RISING,
+ "pm8xxx_rtc_alarm", rtc_dd);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc);
+ goto fail_req_irq;
+ }
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ dev_dbg(&pdev->dev, "Probe success !!\n");
+
+ return 0;
+
+fail_req_irq:
+ rtc_device_unregister(rtc_dd->rtc);
+fail_rtc_enable:
+ platform_set_drvdata(pdev, NULL);
+ kfree(rtc_dd);
+ return rc;
+}
+
+static int __devexit pm8xxx_rtc_remove(struct platform_device *pdev)
+{
+ struct pm8xxx_rtc *rtc_dd = platform_get_drvdata(pdev);
+
+ device_init_wakeup(&pdev->dev, 0);
+ free_irq(rtc_dd->rtc_alarm_irq, rtc_dd);
+ rtc_device_unregister(rtc_dd->rtc);
+ platform_set_drvdata(pdev, NULL);
+ kfree(rtc_dd);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pm8xxx_rtc_resume(struct device *dev)
+{
+ struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(rtc_dd->rtc_alarm_irq);
+
+ return 0;
+}
+
+static int pm8xxx_rtc_suspend(struct device *dev)
+{
+ struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(rtc_dd->rtc_alarm_irq);
+
+ return 0;
+}
+#endif
+
+SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops, pm8xxx_rtc_suspend, pm8xxx_rtc_resume);
+
+static struct platform_driver pm8xxx_rtc_driver = {
+ .probe = pm8xxx_rtc_probe,
+ .remove = __devexit_p(pm8xxx_rtc_remove),
+ .driver = {
+ .name = PM8XXX_RTC_DEV_NAME,
+ .owner = THIS_MODULE,
+ .pm = &pm8xxx_rtc_pm_ops,
+ },
+};
+
+static int __init pm8xxx_rtc_init(void)
+{
+ return platform_driver_register(&pm8xxx_rtc_driver);
+}
+module_init(pm8xxx_rtc_init);
+
+static void __exit pm8xxx_rtc_exit(void)
+{
+ platform_driver_unregister(&pm8xxx_rtc_driver);
+}
+module_exit(pm8xxx_rtc_exit);
+
+MODULE_ALIAS("platform:rtc-pm8xxx");
+MODULE_DESCRIPTION("PMIC8xxx RTC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anirudh Ghayal <aghayal@codeaurora.org>");
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 2a65e85..9329dbb 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -57,11 +57,13 @@ static irqreturn_t s3c_rtc_alarmirq(int irq, void *id)
{
struct rtc_device *rdev = id;
+ clk_enable(rtc_clk);
rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
if (s3c_rtc_cpu_type == TYPE_S3C64XX)
writeb(S3C2410_INTP_ALM, s3c_rtc_base + S3C2410_INTP);
+ clk_disable(rtc_clk);
return IRQ_HANDLED;
}
@@ -69,11 +71,13 @@ static irqreturn_t s3c_rtc_tickirq(int irq, void *id)
{
struct rtc_device *rdev = id;
+ clk_enable(rtc_clk);
rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
if (s3c_rtc_cpu_type == TYPE_S3C64XX)
writeb(S3C2410_INTP_TIC, s3c_rtc_base + S3C2410_INTP);
+ clk_disable(rtc_clk);
return IRQ_HANDLED;
}
@@ -84,12 +88,14 @@ static int s3c_rtc_setaie(struct device *dev, unsigned int enabled)
pr_debug("%s: aie=%d\n", __func__, enabled);
+ clk_enable(rtc_clk);
tmp = readb(s3c_rtc_base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
if (enabled)
tmp |= S3C2410_RTCALM_ALMEN;
writeb(tmp, s3c_rtc_base + S3C2410_RTCALM);
+ clk_disable(rtc_clk);
return 0;
}
@@ -103,6 +109,7 @@ static int s3c_rtc_setfreq(struct device *dev, int freq)
if (!is_power_of_2(freq))
return -EINVAL;
+ clk_enable(rtc_clk);
spin_lock_irq(&s3c_rtc_pie_lock);
if (s3c_rtc_cpu_type == TYPE_S3C2410) {
@@ -114,6 +121,7 @@ static int s3c_rtc_setfreq(struct device *dev, int freq)
writel(tmp, s3c_rtc_base + S3C2410_TICNT);
spin_unlock_irq(&s3c_rtc_pie_lock);
+ clk_disable(rtc_clk);
return 0;
}
@@ -125,6 +133,7 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
unsigned int have_retried = 0;
void __iomem *base = s3c_rtc_base;
+ clk_enable(rtc_clk);
retry_get_time:
rtc_tm->tm_min = readb(base + S3C2410_RTCMIN);
rtc_tm->tm_hour = readb(base + S3C2410_RTCHOUR);
@@ -157,6 +166,7 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
rtc_tm->tm_year += 100;
rtc_tm->tm_mon -= 1;
+ clk_disable(rtc_clk);
return rtc_valid_tm(rtc_tm);
}
@@ -165,6 +175,7 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
void __iomem *base = s3c_rtc_base;
int year = tm->tm_year - 100;
+ clk_enable(rtc_clk);
pr_debug("set time %04d.%02d.%02d %02d:%02d:%02d\n",
1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
@@ -182,6 +193,7 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
writeb(bin2bcd(tm->tm_mday), base + S3C2410_RTCDATE);
writeb(bin2bcd(tm->tm_mon + 1), base + S3C2410_RTCMON);
writeb(bin2bcd(year), base + S3C2410_RTCYEAR);
+ clk_disable(rtc_clk);
return 0;
}
@@ -192,6 +204,7 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
void __iomem *base = s3c_rtc_base;
unsigned int alm_en;
+ clk_enable(rtc_clk);
alm_tm->tm_sec = readb(base + S3C2410_ALMSEC);
alm_tm->tm_min = readb(base + S3C2410_ALMMIN);
alm_tm->tm_hour = readb(base + S3C2410_ALMHOUR);
@@ -243,6 +256,7 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
else
alm_tm->tm_year = -1;
+ clk_disable(rtc_clk);
return 0;
}
@@ -252,6 +266,7 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
void __iomem *base = s3c_rtc_base;
unsigned int alrm_en;
+ clk_enable(rtc_clk);
pr_debug("s3c_rtc_setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
alrm->enabled,
1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
@@ -282,6 +297,7 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
s3c_rtc_setaie(dev, alrm->enabled);
+ clk_disable(rtc_clk);
return 0;
}
@@ -289,6 +305,7 @@ static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
{
unsigned int ticnt;
+ clk_enable(rtc_clk);
if (s3c_rtc_cpu_type == TYPE_S3C64XX) {
ticnt = readw(s3c_rtc_base + S3C2410_RTCCON);
ticnt &= S3C64XX_RTCCON_TICEN;
@@ -298,6 +315,7 @@ static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
}
seq_printf(seq, "periodic_IRQ\t: %s\n", ticnt ? "yes" : "no");
+ clk_disable(rtc_clk);
return 0;
}
@@ -360,6 +378,7 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en)
if (s3c_rtc_base == NULL)
return;
+ clk_enable(rtc_clk);
if (!en) {
tmp = readw(base + S3C2410_RTCCON);
if (s3c_rtc_cpu_type == TYPE_S3C64XX)
@@ -399,6 +418,7 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en)
base + S3C2410_RTCCON);
}
}
+ clk_disable(rtc_clk);
}
static int __devexit s3c_rtc_remove(struct platform_device *dev)
@@ -410,7 +430,6 @@ static int __devexit s3c_rtc_remove(struct platform_device *dev)
s3c_rtc_setaie(&dev->dev, 0);
- clk_disable(rtc_clk);
clk_put(rtc_clk);
rtc_clk = NULL;
@@ -529,6 +548,8 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
s3c_rtc_setfreq(&pdev->dev, 1);
+ clk_disable(rtc_clk);
+
return 0;
err_nortc:
@@ -554,6 +575,7 @@ static int ticnt_save, ticnt_en_save;
static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
+ clk_enable(rtc_clk);
/* save TICNT for anyone using periodic interrupts */
ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT);
if (s3c_rtc_cpu_type == TYPE_S3C64XX) {
@@ -568,6 +590,7 @@ static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
else
dev_err(&pdev->dev, "enable_irq_wake failed\n");
}
+ clk_disable(rtc_clk);
return 0;
}
@@ -576,6 +599,7 @@ static int s3c_rtc_resume(struct platform_device *pdev)
{
unsigned int tmp;
+ clk_enable(rtc_clk);
s3c_rtc_enable(pdev, 1);
writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT);
if (s3c_rtc_cpu_type == TYPE_S3C64XX && ticnt_en_save) {
@@ -587,6 +611,7 @@ static int s3c_rtc_resume(struct platform_device *pdev)
disable_irq_wake(s3c_rtc_alarmno);
wake_en = false;
}
+ clk_disable(rtc_clk);
return 0;
}
diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c
index 2fc31aa..75259fe 100644
--- a/drivers/rtc/rtc-tegra.c
+++ b/drivers/rtc/rtc-tegra.c
@@ -343,7 +343,7 @@ static int __devinit tegra_rtc_probe(struct platform_device *pdev)
/* set context info. */
info->pdev = pdev;
- info->tegra_rtc_lock = __SPIN_LOCK_UNLOCKED(info->tegra_rtc_lock);
+ spin_lock_init(&info->tegra_rtc_lock);
platform_set_drvdata(pdev, info);
diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
index f9a2799..9a81f77 100644
--- a/drivers/rtc/rtc-twl.c
+++ b/drivers/rtc/rtc-twl.c
@@ -275,7 +275,7 @@ static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm)
goto out;
save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
- twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+ ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
if (ret < 0)
goto out;
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 2d93c8d..1e54b8b 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -117,6 +117,14 @@ config LCD_LD9040
If you have an LD9040 Panel, say Y to enable its
control driver.
+config LCD_AMS369FG06
+ tristate "AMS369FG06 AMOLED LCD Driver"
+ depends on SPI && BACKLIGHT_CLASS_DEVICE
+ default n
+ help
+ If you have an AMS369FG06 AMOLED Panel, say Y to enable its
+ LCD control driver.
+
endif # LCD_CLASS_DEVICE
#
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index ee72adb..bf1dd92 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o
obj-$(CONFIG_LCD_LD9040) += ld9040.o
+obj-$(CONFIG_LCD_AMS369FG06) += ams369fg06.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index d2a96a4..183b6f6 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -722,8 +722,7 @@ static int __devinit adp8860_probe(struct i2c_client *client,
goto out2;
}
- bl->props.max_brightness =
- bl->props.brightness = ADP8860_MAX_BRIGHTNESS;
+ bl->props.brightness = ADP8860_MAX_BRIGHTNESS;
data->bl = bl;
diff --git a/drivers/video/backlight/ams369fg06.c b/drivers/video/backlight/ams369fg06.c
new file mode 100644
index 0000000..9f0a491e
--- /dev/null
+++ b/drivers/video/backlight/ams369fg06.c
@@ -0,0 +1,646 @@
+/*
+ * ams369fg06 AMOLED LCD panel driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * Derived from drivers/video/s6e63m0.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/wait.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/lcd.h>
+#include <linux/backlight.h>
+
+#define SLEEPMSEC 0x1000
+#define ENDDEF 0x2000
+#define DEFMASK 0xFF00
+#define COMMAND_ONLY 0xFE
+#define DATA_ONLY 0xFF
+
+#define MAX_GAMMA_LEVEL 5
+#define GAMMA_TABLE_COUNT 21
+
+#define MIN_BRIGHTNESS 0
+#define MAX_BRIGHTNESS 255
+#define DEFAULT_BRIGHTNESS 150
+
+struct ams369fg06 {
+ struct device *dev;
+ struct spi_device *spi;
+ unsigned int power;
+ struct lcd_device *ld;
+ struct backlight_device *bd;
+ struct lcd_platform_data *lcd_pd;
+};
+
+static const unsigned short seq_display_on[] = {
+ 0x14, 0x03,
+ ENDDEF, 0x0000
+};
+
+static const unsigned short seq_display_off[] = {
+ 0x14, 0x00,
+ ENDDEF, 0x0000
+};
+
+static const unsigned short seq_stand_by_on[] = {
+ 0x1D, 0xA1,
+ SLEEPMSEC, 200,
+ ENDDEF, 0x0000
+};
+
+static const unsigned short seq_stand_by_off[] = {
+ 0x1D, 0xA0,
+ SLEEPMSEC, 250,
+ ENDDEF, 0x0000
+};
+
+static const unsigned short seq_setting[] = {
+ 0x31, 0x08,
+ 0x32, 0x14,
+ 0x30, 0x02,
+ 0x27, 0x01,
+ 0x12, 0x08,
+ 0x13, 0x08,
+ 0x15, 0x00,
+ 0x16, 0x00,
+
+ 0xef, 0xd0,
+ DATA_ONLY, 0xe8,
+
+ 0x39, 0x44,
+ 0x40, 0x00,
+ 0x41, 0x3f,
+ 0x42, 0x2a,
+ 0x43, 0x27,
+ 0x44, 0x27,
+ 0x45, 0x1f,
+ 0x46, 0x44,
+ 0x50, 0x00,
+ 0x51, 0x00,
+ 0x52, 0x17,
+ 0x53, 0x24,
+ 0x54, 0x26,
+ 0x55, 0x1f,
+ 0x56, 0x43,
+ 0x60, 0x00,
+ 0x61, 0x3f,
+ 0x62, 0x2a,
+ 0x63, 0x25,
+ 0x64, 0x24,
+ 0x65, 0x1b,
+ 0x66, 0x5c,
+
+ 0x17, 0x22,
+ 0x18, 0x33,
+ 0x19, 0x03,
+ 0x1a, 0x01,
+ 0x22, 0xa4,
+ 0x23, 0x00,
+ 0x26, 0xa0,
+
+ 0x1d, 0xa0,
+ SLEEPMSEC, 300,
+
+ 0x14, 0x03,
+
+ ENDDEF, 0x0000
+};
+
+/* gamma value: 2.2 */
+static const unsigned int ams369fg06_22_250[] = {
+ 0x00, 0x3f, 0x2a, 0x27, 0x27, 0x1f, 0x44,
+ 0x00, 0x00, 0x17, 0x24, 0x26, 0x1f, 0x43,
+ 0x00, 0x3f, 0x2a, 0x25, 0x24, 0x1b, 0x5c,
+};
+
+static const unsigned int ams369fg06_22_200[] = {
+ 0x00, 0x3f, 0x28, 0x29, 0x27, 0x21, 0x3e,
+ 0x00, 0x00, 0x10, 0x25, 0x27, 0x20, 0x3d,
+ 0x00, 0x3f, 0x28, 0x27, 0x25, 0x1d, 0x53,
+};
+
+static const unsigned int ams369fg06_22_150[] = {
+ 0x00, 0x3f, 0x2d, 0x29, 0x28, 0x23, 0x37,
+ 0x00, 0x00, 0x0b, 0x25, 0x28, 0x22, 0x36,
+ 0x00, 0x3f, 0x2b, 0x28, 0x26, 0x1f, 0x4a,
+};
+
+static const unsigned int ams369fg06_22_100[] = {
+ 0x00, 0x3f, 0x30, 0x2a, 0x2b, 0x24, 0x2f,
+ 0x00, 0x00, 0x00, 0x25, 0x29, 0x24, 0x2e,
+ 0x00, 0x3f, 0x2f, 0x29, 0x29, 0x21, 0x3f,
+};
+
+static const unsigned int ams369fg06_22_50[] = {
+ 0x00, 0x3f, 0x3c, 0x2c, 0x2d, 0x27, 0x24,
+ 0x00, 0x00, 0x00, 0x22, 0x2a, 0x27, 0x23,
+ 0x00, 0x3f, 0x3b, 0x2c, 0x2b, 0x24, 0x31,
+};
+
+struct ams369fg06_gamma {
+ unsigned int *gamma_22_table[MAX_GAMMA_LEVEL];
+};
+
+static struct ams369fg06_gamma gamma_table = {
+ .gamma_22_table[0] = (unsigned int *)&ams369fg06_22_50,
+ .gamma_22_table[1] = (unsigned int *)&ams369fg06_22_100,
+ .gamma_22_table[2] = (unsigned int *)&ams369fg06_22_150,
+ .gamma_22_table[3] = (unsigned int *)&ams369fg06_22_200,
+ .gamma_22_table[4] = (unsigned int *)&ams369fg06_22_250,
+};
+
+static int ams369fg06_spi_write_byte(struct ams369fg06 *lcd, int addr, int data)
+{
+ u16 buf[1];
+ struct spi_message msg;
+
+ struct spi_transfer xfer = {
+ .len = 2,
+ .tx_buf = buf,
+ };
+
+ buf[0] = (addr << 8) | data;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ return spi_sync(lcd->spi, &msg);
+}
+
+static int ams369fg06_spi_write(struct ams369fg06 *lcd, unsigned char address,
+ unsigned char command)
+{
+ int ret = 0;
+
+ if (address != DATA_ONLY)
+ ret = ams369fg06_spi_write_byte(lcd, 0x70, address);
+ if (command != COMMAND_ONLY)
+ ret = ams369fg06_spi_write_byte(lcd, 0x72, command);
+
+ return ret;
+}
+
+static int ams369fg06_panel_send_sequence(struct ams369fg06 *lcd,
+ const unsigned short *wbuf)
+{
+ int ret = 0, i = 0;
+
+ while ((wbuf[i] & DEFMASK) != ENDDEF) {
+ if ((wbuf[i] & DEFMASK) != SLEEPMSEC) {
+ ret = ams369fg06_spi_write(lcd, wbuf[i], wbuf[i+1]);
+ if (ret)
+ break;
+ } else
+ mdelay(wbuf[i+1]);
+ i += 2;
+ }
+
+ return ret;
+}
+
+static int _ams369fg06_gamma_ctl(struct ams369fg06 *lcd,
+ const unsigned int *gamma)
+{
+ unsigned int i = 0;
+ int ret = 0;
+
+ for (i = 0 ; i < GAMMA_TABLE_COUNT / 3; i++) {
+ ret = ams369fg06_spi_write(lcd, 0x40 + i, gamma[i]);
+ ret = ams369fg06_spi_write(lcd, 0x50 + i, gamma[i+7*1]);
+ ret = ams369fg06_spi_write(lcd, 0x60 + i, gamma[i+7*2]);
+ if (ret) {
+ dev_err(lcd->dev, "failed to set gamma table.\n");
+ goto gamma_err;
+ }
+ }
+
+gamma_err:
+ return ret;
+}
+
+static int ams369fg06_gamma_ctl(struct ams369fg06 *lcd, int brightness)
+{
+ int ret = 0;
+ int gamma = 0;
+
+ if ((brightness >= 0) && (brightness <= 50))
+ gamma = 0;
+ else if ((brightness > 50) && (brightness <= 100))
+ gamma = 1;
+ else if ((brightness > 100) && (brightness <= 150))
+ gamma = 2;
+ else if ((brightness > 150) && (brightness <= 200))
+ gamma = 3;
+ else if ((brightness > 200) && (brightness <= 255))
+ gamma = 4;
+
+ ret = _ams369fg06_gamma_ctl(lcd, gamma_table.gamma_22_table[gamma]);
+
+ return ret;
+}
+
+static int ams369fg06_ldi_init(struct ams369fg06 *lcd)
+{
+ int ret, i;
+ static const unsigned short *init_seq[] = {
+ seq_setting,
+ seq_stand_by_off,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
+ ret = ams369fg06_panel_send_sequence(lcd, init_seq[i]);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int ams369fg06_ldi_enable(struct ams369fg06 *lcd)
+{
+ int ret, i;
+ static const unsigned short *init_seq[] = {
+ seq_stand_by_off,
+ seq_display_on,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
+ ret = ams369fg06_panel_send_sequence(lcd, init_seq[i]);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int ams369fg06_ldi_disable(struct ams369fg06 *lcd)
+{
+ int ret, i;
+
+ static const unsigned short *init_seq[] = {
+ seq_display_off,
+ seq_stand_by_on,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
+ ret = ams369fg06_panel_send_sequence(lcd, init_seq[i]);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int ams369fg06_power_is_on(int power)
+{
+ return ((power) <= FB_BLANK_NORMAL);
+}
+
+static int ams369fg06_power_on(struct ams369fg06 *lcd)
+{
+ int ret = 0;
+ struct lcd_platform_data *pd = NULL;
+ struct backlight_device *bd = NULL;
+
+ pd = lcd->lcd_pd;
+ if (!pd) {
+ dev_err(lcd->dev, "platform data is NULL.\n");
+ return -EFAULT;
+ }
+
+ bd = lcd->bd;
+ if (!bd) {
+ dev_err(lcd->dev, "backlight device is NULL.\n");
+ return -EFAULT;
+ }
+
+ if (!pd->power_on) {
+ dev_err(lcd->dev, "power_on is NULL.\n");
+ return -EFAULT;
+ } else {
+ pd->power_on(lcd->ld, 1);
+ mdelay(pd->power_on_delay);
+ }
+
+ if (!pd->reset) {
+ dev_err(lcd->dev, "reset is NULL.\n");
+ return -EFAULT;
+ } else {
+ pd->reset(lcd->ld);
+ mdelay(pd->reset_delay);
+ }
+
+ ret = ams369fg06_ldi_init(lcd);
+ if (ret) {
+ dev_err(lcd->dev, "failed to initialize ldi.\n");
+ return ret;
+ }
+
+ ret = ams369fg06_ldi_enable(lcd);
+ if (ret) {
+ dev_err(lcd->dev, "failed to enable ldi.\n");
+ return ret;
+ }
+
+ /* set brightness to current value after power on or resume. */
+ ret = ams369fg06_gamma_ctl(lcd, bd->props.brightness);
+ if (ret) {
+ dev_err(lcd->dev, "lcd gamma setting failed.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ams369fg06_power_off(struct ams369fg06 *lcd)
+{
+ int ret = 0;
+ struct lcd_platform_data *pd = NULL;
+
+ pd = lcd->lcd_pd;
+ if (!pd) {
+ dev_err(lcd->dev, "platform data is NULL\n");
+ return -EFAULT;
+ }
+
+ ret = ams369fg06_ldi_disable(lcd);
+ if (ret) {
+ dev_err(lcd->dev, "lcd setting failed.\n");
+ return -EIO;
+ }
+
+ mdelay(pd->power_off_delay);
+
+ if (!pd->power_on) {
+ dev_err(lcd->dev, "power_on is NULL.\n");
+ return -EFAULT;
+ } else
+ pd->power_on(lcd->ld, 0);
+
+ return 0;
+}
+
+static int ams369fg06_power(struct ams369fg06 *lcd, int power)
+{
+ int ret = 0;
+
+ if (ams369fg06_power_is_on(power) &&
+ !ams369fg06_power_is_on(lcd->power))
+ ret = ams369fg06_power_on(lcd);
+ else if (!ams369fg06_power_is_on(power) &&
+ ams369fg06_power_is_on(lcd->power))
+ ret = ams369fg06_power_off(lcd);
+
+ if (!ret)
+ lcd->power = power;
+
+ return ret;
+}
+
+static int ams369fg06_get_power(struct lcd_device *ld)
+{
+ struct ams369fg06 *lcd = lcd_get_data(ld);
+
+ return lcd->power;
+}
+
+static int ams369fg06_set_power(struct lcd_device *ld, int power)
+{
+ struct ams369fg06 *lcd = lcd_get_data(ld);
+
+ if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
+ power != FB_BLANK_NORMAL) {
+ dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
+ return -EINVAL;
+ }
+
+ return ams369fg06_power(lcd, power);
+}
+
+static int ams369fg06_get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static int ams369fg06_set_brightness(struct backlight_device *bd)
+{
+ int ret = 0;
+ int brightness = bd->props.brightness;
+ struct ams369fg06 *lcd = dev_get_drvdata(&bd->dev);
+
+ if (brightness < MIN_BRIGHTNESS ||
+ brightness > bd->props.max_brightness) {
+ dev_err(&bd->dev, "lcd brightness should be %d to %d.\n",
+ MIN_BRIGHTNESS, MAX_BRIGHTNESS);
+ return -EINVAL;
+ }
+
+ ret = ams369fg06_gamma_ctl(lcd, bd->props.brightness);
+ if (ret) {
+ dev_err(&bd->dev, "lcd brightness setting failed.\n");
+ return -EIO;
+ }
+
+ return ret;
+}
+
+static struct lcd_ops ams369fg06_lcd_ops = {
+ .get_power = ams369fg06_get_power,
+ .set_power = ams369fg06_set_power,
+};
+
+static const struct backlight_ops ams369fg06_backlight_ops = {
+ .get_brightness = ams369fg06_get_brightness,
+ .update_status = ams369fg06_set_brightness,
+};
+
+static int __devinit ams369fg06_probe(struct spi_device *spi)
+{
+ int ret = 0;
+ struct ams369fg06 *lcd = NULL;
+ struct lcd_device *ld = NULL;
+ struct backlight_device *bd = NULL;
+ struct backlight_properties props;
+
+ lcd = kzalloc(sizeof(struct ams369fg06), GFP_KERNEL);
+ if (!lcd)
+ return -ENOMEM;
+
+ /* ams369fg06 lcd panel uses 3-wire 16bits SPI Mode. */
+ spi->bits_per_word = 16;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(&spi->dev, "spi setup failed.\n");
+ goto out_free_lcd;
+ }
+
+ lcd->spi = spi;
+ lcd->dev = &spi->dev;
+
+ lcd->lcd_pd = spi->dev.platform_data;
+ if (!lcd->lcd_pd) {
+ dev_err(&spi->dev, "platform data is NULL\n");
+ goto out_free_lcd;
+ }
+
+ ld = lcd_device_register("ams369fg06", &spi->dev, lcd,
+ &ams369fg06_lcd_ops);
+ if (IS_ERR(ld)) {
+ ret = PTR_ERR(ld);
+ goto out_free_lcd;
+ }
+
+ lcd->ld = ld;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.type = BACKLIGHT_RAW;
+ props.max_brightness = MAX_BRIGHTNESS;
+
+ bd = backlight_device_register("ams369fg06-bl", &spi->dev, lcd,
+ &ams369fg06_backlight_ops, &props);
+ if (IS_ERR(bd)) {
+ ret = PTR_ERR(bd);
+ goto out_lcd_unregister;
+ }
+
+ bd->props.brightness = DEFAULT_BRIGHTNESS;
+ lcd->bd = bd;
+
+ if (!lcd->lcd_pd->lcd_enabled) {
+ /*
+ * if lcd panel was off from bootloader then
+ * current lcd status is powerdown and then
+ * it enables lcd panel.
+ */
+ lcd->power = FB_BLANK_POWERDOWN;
+
+ ams369fg06_power(lcd, FB_BLANK_UNBLANK);
+ } else
+ lcd->power = FB_BLANK_UNBLANK;
+
+ dev_set_drvdata(&spi->dev, lcd);
+
+ dev_info(&spi->dev, "ams369fg06 panel driver has been probed.\n");
+
+ return 0;
+
+out_lcd_unregister:
+ lcd_device_unregister(ld);
+out_free_lcd:
+ kfree(lcd);
+ return ret;
+}
+
+static int __devexit ams369fg06_remove(struct spi_device *spi)
+{
+ struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
+
+ ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
+ backlight_device_unregister(lcd->bd);
+ lcd_device_unregister(lcd->ld);
+ kfree(lcd);
+
+ return 0;
+}
+
+#if defined(CONFIG_PM)
+static unsigned int before_power;
+
+static int ams369fg06_suspend(struct spi_device *spi, pm_message_t mesg)
+{
+ int ret = 0;
+ struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power);
+
+ before_power = lcd->power;
+
+ /*
+ * when lcd panel is suspend, lcd panel becomes off
+ * regardless of status.
+ */
+ ret = ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
+
+ return ret;
+}
+
+static int ams369fg06_resume(struct spi_device *spi)
+{
+ int ret = 0;
+ struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
+
+ /*
+ * after suspended, if lcd panel status is FB_BLANK_UNBLANK
+ * (at that time, before_power is FB_BLANK_UNBLANK) then
+ * it changes that status to FB_BLANK_POWERDOWN to get lcd on.
+ */
+ if (before_power == FB_BLANK_UNBLANK)
+ lcd->power = FB_BLANK_POWERDOWN;
+
+ dev_dbg(&spi->dev, "before_power = %d\n", before_power);
+
+ ret = ams369fg06_power(lcd, before_power);
+
+ return ret;
+}
+#else
+#define ams369fg06_suspend NULL
+#define ams369fg06_resume NULL
+#endif
+
+static void ams369fg06_shutdown(struct spi_device *spi)
+{
+ struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
+
+ ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
+}
+
+static struct spi_driver ams369fg06_driver = {
+ .driver = {
+ .name = "ams369fg06",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ams369fg06_probe,
+ .remove = __devexit_p(ams369fg06_remove),
+ .shutdown = ams369fg06_shutdown,
+ .suspend = ams369fg06_suspend,
+ .resume = ams369fg06_resume,
+};
+
+static int __init ams369fg06_init(void)
+{
+ return spi_register_driver(&ams369fg06_driver);
+}
+
+static void __exit ams369fg06_exit(void)
+{
+ spi_unregister_driver(&ams369fg06_driver);
+}
+
+module_init(ams369fg06_init);
+module_exit(ams369fg06_exit);
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("ams369fg06 LCD Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/ld9040.c b/drivers/video/backlight/ld9040.c
index 7281b25..5934655 100644
--- a/drivers/video/backlight/ld9040.c
+++ b/drivers/video/backlight/ld9040.c
@@ -668,6 +668,7 @@ static int ld9040_probe(struct spi_device *spi)
struct ld9040 *lcd = NULL;
struct lcd_device *ld = NULL;
struct backlight_device *bd = NULL;
+ struct backlight_properties props;
lcd = kzalloc(sizeof(struct ld9040), GFP_KERNEL);
if (!lcd)
@@ -699,14 +700,17 @@ static int ld9040_probe(struct spi_device *spi)
lcd->ld = ld;
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.type = BACKLIGHT_RAW;
+ props.max_brightness = MAX_BRIGHTNESS;
+
bd = backlight_device_register("ld9040-bl", &spi->dev,
- lcd, &ld9040_backlight_ops, NULL);
- if (IS_ERR(ld)) {
- ret = PTR_ERR(ld);
- goto out_free_lcd;
+ lcd, &ld9040_backlight_ops, &props);
+ if (IS_ERR(bd)) {
+ ret = PTR_ERR(bd);
+ goto out_unregister_lcd;
}
- bd->props.max_brightness = MAX_BRIGHTNESS;
bd->props.brightness = MAX_BRIGHTNESS;
lcd->bd = bd;
@@ -731,6 +735,8 @@ static int ld9040_probe(struct spi_device *spi)
dev_info(&spi->dev, "ld9040 panel driver has been probed.\n");
return 0;
+out_unregister_lcd:
+ lcd_device_unregister(lcd->ld);
out_free_lcd:
kfree(lcd);
return ret;
@@ -741,6 +747,7 @@ static int __devexit ld9040_remove(struct spi_device *spi)
struct ld9040 *lcd = dev_get_drvdata(&spi->dev);
ld9040_power(lcd, FB_BLANK_POWERDOWN);
+ backlight_device_unregister(lcd->bd);
lcd_device_unregister(lcd->ld);
kfree(lcd);
diff --git a/drivers/video/backlight/s6e63m0.c b/drivers/video/backlight/s6e63m0.c
index 322040f..694e5aa 100644
--- a/drivers/video/backlight/s6e63m0.c
+++ b/drivers/video/backlight/s6e63m0.c
@@ -738,6 +738,7 @@ static int __devinit s6e63m0_probe(struct spi_device *spi)
struct s6e63m0 *lcd = NULL;
struct lcd_device *ld = NULL;
struct backlight_device *bd = NULL;
+ struct backlight_properties props;
lcd = kzalloc(sizeof(struct s6e63m0), GFP_KERNEL);
if (!lcd)
@@ -769,16 +770,18 @@ static int __devinit s6e63m0_probe(struct spi_device *spi)
lcd->ld = ld;
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.type = BACKLIGHT_RAW;
+ props.max_brightness = MAX_BRIGHTNESS;
+
bd = backlight_device_register("s6e63m0bl-bl", &spi->dev, lcd,
- &s6e63m0_backlight_ops, NULL);
+ &s6e63m0_backlight_ops, &props);
if (IS_ERR(bd)) {
ret = PTR_ERR(bd);
goto out_lcd_unregister;
}
- bd->props.max_brightness = MAX_BRIGHTNESS;
bd->props.brightness = MAX_BRIGHTNESS;
- bd->props.type = BACKLIGHT_RAW;
lcd->bd = bd;
/*
@@ -840,7 +843,7 @@ static int __devexit s6e63m0_remove(struct spi_device *spi)
}
#if defined(CONFIG_PM)
-unsigned int before_power;
+static unsigned int before_power;
static int s6e63m0_suspend(struct spi_device *spi, pm_message_t mesg)
{
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 03bc471..f815283 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -26,6 +26,36 @@ config XEN_SELFBALLOONING
kernel boot parameter. Note that systems without a sufficiently
large swap device should not enable self-ballooning.
+config XEN_BALLOON_MEMORY_HOTPLUG
+ bool "Memory hotplug support for Xen balloon driver"
+ default n
+ depends on XEN_BALLOON && MEMORY_HOTPLUG
+ help
+ Memory hotplug support for Xen balloon driver allows expanding memory
+ available for the system above limit declared at system startup.
+ It is very useful on critical systems which require long
+ run without rebooting.
+
+ Memory could be hotplugged in following steps:
+
+ 1) dom0: xl mem-max <domU> <maxmem>
+ where <maxmem> is >= requested memory size,
+
+ 2) dom0: xl mem-set <domU> <memory>
+ where <memory> is requested memory size; alternatively memory
+ could be added by writing proper value to
+ /sys/devices/system/xen_memory/xen_memory0/target or
+ /sys/devices/system/xen_memory/xen_memory0/target_kb on dumU,
+
+ 3) domU: for i in /sys/devices/system/memory/memory*/state; do \
+ [ "`cat "$i"`" = offline ] && echo online > "$i"; done
+
+ Memory could be onlined automatically on domU by adding following line to udev rules:
+
+ SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'"
+
+ In that case step 3 should be omitted.
+
config XEN_SCRUB_PAGES
bool "Scrub pages before returning them to system"
depends on XEN_BALLOON
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index f54290b..5dfd8f8 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -4,6 +4,12 @@
* Copyright (c) 2003, B Dragovic
* Copyright (c) 2003-2004, M Williamson, K Fraser
* Copyright (c) 2005 Dan M. Smith, IBM Corporation
+ * Copyright (c) 2010 Daniel Kiper
+ *
+ * Memory hotplug support was written by Daniel Kiper. Work on
+ * it was sponsored by Google under Google Summer of Code 2010
+ * program. Jeremy Fitzhardinge from Citrix was the mentor for
+ * this project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version 2
@@ -40,6 +46,9 @@
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/gfp.h>
+#include <linux/notifier.h>
+#include <linux/memory.h>
+#include <linux/memory_hotplug.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
@@ -194,6 +203,87 @@ static enum bp_state update_schedule(enum bp_state state)
return BP_EAGAIN;
}
+#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
+static long current_credit(void)
+{
+ return balloon_stats.target_pages - balloon_stats.current_pages -
+ balloon_stats.hotplug_pages;
+}
+
+static bool balloon_is_inflated(void)
+{
+ if (balloon_stats.balloon_low || balloon_stats.balloon_high ||
+ balloon_stats.balloon_hotplug)
+ return true;
+ else
+ return false;
+}
+
+/*
+ * reserve_additional_memory() adds memory region of size >= credit above
+ * max_pfn. New region is section aligned and size is modified to be multiple
+ * of section size. Those features allow optimal use of address space and
+ * establish proper alignment when this function is called first time after
+ * boot (last section not fully populated at boot time contains unused memory
+ * pages with PG_reserved bit not set; online_pages_range() does not allow page
+ * onlining in whole range if first onlined page does not have PG_reserved
+ * bit set). Real size of added memory is established at page onlining stage.
+ */
+
+static enum bp_state reserve_additional_memory(long credit)
+{
+ int nid, rc;
+ u64 hotplug_start_paddr;
+ unsigned long balloon_hotplug = credit;
+
+ hotplug_start_paddr = PFN_PHYS(SECTION_ALIGN_UP(max_pfn));
+ balloon_hotplug = round_up(balloon_hotplug, PAGES_PER_SECTION);
+ nid = memory_add_physaddr_to_nid(hotplug_start_paddr);
+
+ rc = add_memory(nid, hotplug_start_paddr, balloon_hotplug << PAGE_SHIFT);
+
+ if (rc) {
+ pr_info("xen_balloon: %s: add_memory() failed: %i\n", __func__, rc);
+ return BP_EAGAIN;
+ }
+
+ balloon_hotplug -= credit;
+
+ balloon_stats.hotplug_pages += credit;
+ balloon_stats.balloon_hotplug = balloon_hotplug;
+
+ return BP_DONE;
+}
+
+static void xen_online_page(struct page *page)
+{
+ __online_page_set_limits(page);
+
+ mutex_lock(&balloon_mutex);
+
+ __balloon_append(page);
+
+ if (balloon_stats.hotplug_pages)
+ --balloon_stats.hotplug_pages;
+ else
+ --balloon_stats.balloon_hotplug;
+
+ mutex_unlock(&balloon_mutex);
+}
+
+static int xen_memory_notifier(struct notifier_block *nb, unsigned long val, void *v)
+{
+ if (val == MEM_ONLINE)
+ schedule_delayed_work(&balloon_worker, 0);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block xen_memory_nb = {
+ .notifier_call = xen_memory_notifier,
+ .priority = 0
+};
+#else
static long current_credit(void)
{
unsigned long target = balloon_stats.target_pages;
@@ -206,6 +296,21 @@ static long current_credit(void)
return target - balloon_stats.current_pages;
}
+static bool balloon_is_inflated(void)
+{
+ if (balloon_stats.balloon_low || balloon_stats.balloon_high)
+ return true;
+ else
+ return false;
+}
+
+static enum bp_state reserve_additional_memory(long credit)
+{
+ balloon_stats.target_pages = balloon_stats.current_pages;
+ return BP_DONE;
+}
+#endif /* CONFIG_XEN_BALLOON_MEMORY_HOTPLUG */
+
static enum bp_state increase_reservation(unsigned long nr_pages)
{
int rc;
@@ -217,6 +322,15 @@ static enum bp_state increase_reservation(unsigned long nr_pages)
.domid = DOMID_SELF
};
+#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
+ if (!balloon_stats.balloon_low && !balloon_stats.balloon_high) {
+ nr_pages = min(nr_pages, balloon_stats.balloon_hotplug);
+ balloon_stats.hotplug_pages += nr_pages;
+ balloon_stats.balloon_hotplug -= nr_pages;
+ return BP_DONE;
+ }
+#endif
+
if (nr_pages > ARRAY_SIZE(frame_list))
nr_pages = ARRAY_SIZE(frame_list);
@@ -279,6 +393,15 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp)
.domid = DOMID_SELF
};
+#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
+ if (balloon_stats.hotplug_pages) {
+ nr_pages = min(nr_pages, balloon_stats.hotplug_pages);
+ balloon_stats.hotplug_pages -= nr_pages;
+ balloon_stats.balloon_hotplug += nr_pages;
+ return BP_DONE;
+ }
+#endif
+
if (nr_pages > ARRAY_SIZE(frame_list))
nr_pages = ARRAY_SIZE(frame_list);
@@ -340,8 +463,12 @@ static void balloon_process(struct work_struct *work)
do {
credit = current_credit();
- if (credit > 0)
- state = increase_reservation(credit);
+ if (credit > 0) {
+ if (balloon_is_inflated())
+ state = increase_reservation(credit);
+ else
+ state = reserve_additional_memory(credit);
+ }
if (credit < 0)
state = decrease_reservation(-credit, GFP_BALLOON);
@@ -448,6 +575,14 @@ static int __init balloon_init(void)
balloon_stats.retry_count = 1;
balloon_stats.max_retry_count = RETRY_UNLIMITED;
+#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
+ balloon_stats.hotplug_pages = 0;
+ balloon_stats.balloon_hotplug = 0;
+
+ set_online_page_callback(&xen_online_page);
+ register_memory_notifier(&xen_memory_nb);
+#endif
+
/*
* Initialise the balloon with excess memory space. We need
* to make sure we don't add memory which doesn't exist or
OpenPOWER on IntegriCloud