diff options
author | Russ Gorby <russ.gorby@intel.com> | 2011-02-07 12:02:31 -0800 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-02-17 11:16:15 -0800 |
commit | 2aff8d90a073e5a07e1ff5a94779d6a21fb72dd2 (patch) | |
tree | dbe4ec15ca988d3b4e020fdc1cde9ece98f46c8a /drivers | |
parent | 1b79b440576b80bace7b6fa012a57ed91d763b5f (diff) | |
download | op-kernel-dev-2aff8d90a073e5a07e1ff5a94779d6a21fb72dd2.zip op-kernel-dev-2aff8d90a073e5a07e1ff5a94779d6a21fb72dd2.tar.gz |
serial: ifx6x60: probe routine needs to call spi_setup
The probe routine should call spi_setup() to configure
the SPI bus so it can properly communicate with the device.
E.g. the device operates in SPI mode 1.
Called spi_setup to configure SPI mode, max_speed_hz, and bpw
Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/tty/serial/ifx6x60.c | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 766f0c3..59e9cb8 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -67,6 +67,7 @@ #define IFX_SPI_MORE_MASK 0x10 #define IFX_SPI_MORE_BIT 12 /* bit position in u16 */ #define IFX_SPI_CTS_BIT 13 /* bit position in u16 */ +#define IFX_SPI_MODE SPI_MODE_1 #define IFX_SPI_TTY_ID 0 #define IFX_SPI_TIMEOUT_SEC 2 #define IFX_SPI_HEADER_0 (-1) @@ -992,7 +993,15 @@ static int ifx_spi_spi_probe(struct spi_device *spi) ifx_dev->modem = pl_data->modem_type; ifx_dev->use_dma = pl_data->use_dma; ifx_dev->max_hz = pl_data->max_hz; + /* initialize spi mode, etc */ spi->max_speed_hz = ifx_dev->max_hz; + spi->mode = IFX_SPI_MODE | (SPI_LOOP & spi->mode); + spi->bits_per_word = spi_bpw; + ret = spi_setup(spi); + if (ret) { + dev_err(&spi->dev, "SPI setup wasn't successful %d", ret); + return -ENODEV; + } /* ensure SPI protocol flags are initialized to enable transfer */ ifx_dev->spi_more = 0; |