Merge master.kernel.org:/home/rmk/linux-2.6-serial

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] 8250: sysrq deadlock fix
  [SERIAL] 8250: add tsi108 serial support
  [SERIAL] IP22: fix serial console hangs
  [SERIAL] dz: Fix compilation error

4 files changed, 24 insertions, 7 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0995430..0ae9ced 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -299,6 +299,7 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
 
 static unsigned int serial_in(struct uart_8250_port *up, int offset)
 {
+	unsigned int tmp;
 	offset = map_8250_in_reg(up, offset) << up->port.regshift;
 
 	switch (up->port.iotype) {
@@ -317,6 +318,13 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset)
 		return __raw_readl(up->port.membase + offset);
 #endif
 
+	case UPIO_TSI:
+		if (offset == UART_IIR) {
+			tmp = readl((u32 *)(up->port.membase + UART_RX));
+			return (cpu_to_le32(tmp) >> 8) & 0xff;
+		} else
+			return readb(up->port.membase + offset);
+
 	default:
 		return inb(up->port.iobase + offset);
 	}
@@ -346,6 +354,10 @@ serial_out(struct uart_8250_port *up, int offset, int value)
 		__raw_writel(value, up->port.membase + offset);
 		break;
 #endif
+	case UPIO_TSI:
+		if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+			writeb(value, up->port.membase + offset);
+		break;
 
 	default:
 		outb(value, up->port.iobase + offset);
@@ -2240,10 +2252,14 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 
 	touch_nmi_watchdog();
 
-	if (oops_in_progress) {
-		locked = spin_trylock_irqsave(&up->port.lock, flags);
+	local_irq_save(flags);
+	if (up->port.sysrq) {
+		/* serial8250_handle_port() already took the lock */
+		locked = 0;
+	} else if (oops_in_progress) {
+		locked = spin_trylock(&up->port.lock);
 	} else
-		spin_lock_irqsave(&up->port.lock, flags);
+		spin_lock(&up->port.lock);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -2265,7 +2281,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 	serial_out(up, UART_IER, ier);
 
 	if (locked)
-		spin_unlock_irqrestore(&up->port.lock, flags);
+		spin_unlock(&up->port.lock);
+	local_irq_restore(flags);
 }
 
 static int serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index d119c82..8a98aae 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -673,7 +673,7 @@ static void dz_reset(struct dz_port *dport)
 }
 
 #ifdef CONFIG_SERIAL_DZ_CONSOLE
-static void dz_console_putchar(struct uart_port *port, int ch)
+static void dz_console_putchar(struct uart_port *uport, int ch)
 {
 	struct dz_port *dport = (struct dz_port *)uport;
 	unsigned long flags;
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 3420428..5ff269f 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -1143,9 +1143,8 @@ static void __init ip22zilog_prepare(void)
 		up[(chip * 2) + 1].port.fifosize = 1;
 		up[(chip * 2) + 1].port.ops = &ip22zilog_pops;
 		up[(chip * 2) + 1].port.type = PORT_IP22ZILOG;
-		up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
 		up[(chip * 2) + 1].port.line = (chip * 2) + 1;
-		up[(chip * 2) + 1].flags = 0;
+		up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
 	}
 }
 
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index d5f636f..80ef7d4 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2036,6 +2036,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 	case UPIO_MEM:
 	case UPIO_MEM32:
 	case UPIO_AU:
+	case UPIO_TSI:
 		snprintf(address, sizeof(address),
 			 "MMIO 0x%lx", port->mapbase);
 		break;