Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: document the multi-touch (MT) protocol
  Input: add detailed multi-touch finger data report protocol
  Input: allow certain EV_ABS events to bypass all filtering
  Input: bcm5974 - add documentation for the driver
  Input: bcm5974 - augment debug information
  Input: bcm5974 - Add support for the Macbook 5 (Unibody)
  Input: bcm5974 - add quad-finger tapping
  Input: bcm5974 - prepare for a new trackpad header type
  Input: appletouch - fix DMA to/from stack buffer
  Input: wacom - fix TabletPC touch bug
  Input: lifebook - add DMI entry for Fujitsu B-2130
  Input: ALPS - add signature for Toshiba Satellite Pro M10
  Input: elantech - make sure touchpad is really in absolute mode
  Input: elantech - provide a workaround for jumpy cursor on firmware 2.34
  Input: ucb1400 - use disable_irq_nosync() in irq handler
  Input: tsc2007 - use disable_irq_nosync() in irq handler
  Input: sa1111ps2 - use disable_irq_nosync() in irq handlers
  Input: omap-keypad - use disable_irq_nosync() in irq handler

13 files changed, 217 insertions, 51 deletions

diff --git a/drivers/input/input.c b/drivers/input/input.c
index 935a1835..e54e002 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -29,6 +29,23 @@ MODULE_LICENSE("GPL");
 
 #define INPUT_DEVICES	256
 
+/*
+ * EV_ABS events which should not be cached are listed here.
+ */
+static unsigned int input_abs_bypass_init_data[] __initdata = {
+	ABS_MT_TOUCH_MAJOR,
+	ABS_MT_TOUCH_MINOR,
+	ABS_MT_WIDTH_MAJOR,
+	ABS_MT_WIDTH_MINOR,
+	ABS_MT_ORIENTATION,
+	ABS_MT_POSITION_X,
+	ABS_MT_POSITION_Y,
+	ABS_MT_TOOL_TYPE,
+	ABS_MT_BLOB_ID,
+	0
+};
+static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
+
 static LIST_HEAD(input_dev_list);
 static LIST_HEAD(input_handler_list);
 
@@ -161,6 +178,10 @@ static void input_handle_event(struct input_dev *dev,
 				disposition = INPUT_PASS_TO_HANDLERS;
 			}
 			break;
+		case SYN_MT_REPORT:
+			dev->sync = 0;
+			disposition = INPUT_PASS_TO_HANDLERS;
+			break;
 		}
 		break;
 
@@ -192,6 +213,11 @@ static void input_handle_event(struct input_dev *dev,
 	case EV_ABS:
 		if (is_event_supported(code, dev->absbit, ABS_MAX)) {
 
+			if (test_bit(code, input_abs_bypass)) {
+				disposition = INPUT_PASS_TO_HANDLERS;
+				break;
+			}
+
 			value = input_defuzz_abs_event(value,
 					dev->abs[code], dev->absfuzz[code]);
 
@@ -1634,10 +1660,20 @@ static const struct file_operations input_fops = {
 	.open = input_open_file,
 };
 
+static void __init input_init_abs_bypass(void)
+{
+	const unsigned int *p;
+
+	for (p = input_abs_bypass_init_data; *p; p++)
+		input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p);
+}
+
 static int __init input_init(void)
 {
 	int err;
 
+	input_init_abs_bypass();
+
 	err = class_register(&input_class);
 	if (err) {
 		printk(KERN_ERR "input: unable to register input_dev class\n");
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 058fa8b..87ec7b1 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -100,8 +100,20 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 	/* disable keyboard interrupt and schedule for handling */
 	if (cpu_is_omap24xx()) {
 		int i;
-		for (i = 0; i < omap_kp->rows; i++)
-			disable_irq(gpio_to_irq(row_gpios[i]));
+
+		for (i = 0; i < omap_kp->rows; i++) {
+			int gpio_irq = gpio_to_irq(row_gpios[i]);
+			/*
+			 * The interrupt which we're currently handling should
+			 * be disabled _nosync() to avoid deadlocks waiting
+			 * for this handler to complete.  All others should
+			 * be disabled the regular way for SMP safety.
+			 */
+			if (gpio_irq == irq)
+				disable_irq_nosync(gpio_irq);
+			else
+				disable_irq(gpio_irq);
+		}
 	} else
 		/* disable keyboard interrupt and schedule for handling */
 		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index cbedf95..daecc75 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -37,6 +37,7 @@
 #define ALPS_FW_BK_2	0x40
 
 static const struct alps_model_info alps_model_data[] = {
+	{ { 0x32, 0x02, 0x14 },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
 	{ { 0x33, 0x02, 0x0a },	0x88, 0xf8, ALPS_OLDPROTO },		/* UMAX-530T */
 	{ { 0x53, 0x02, 0x0a },	0xf8, 0xf8, 0 },
 	{ { 0x53, 0x02, 0x14 },	0xf8, 0xf8, 0 },
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 454b961..e0140fd 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -255,15 +255,22 @@ MODULE_PARM_DESC(debug, "Activate debugging output");
  */
 static int atp_geyser_init(struct usb_device *udev)
 {
-	char data[8];
+	char *data;
 	int size;
 	int i;
+	int ret;
+
+	data = kmalloc(8, GFP_KERNEL);
+	if (!data) {
+		err("Out of memory");
+		return -ENOMEM;
+	}
 
 	size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 			ATP_GEYSER_MODE_READ_REQUEST_ID,
 			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 			ATP_GEYSER_MODE_REQUEST_VALUE,
-			ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+			ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
 
 	if (size != 8) {
 		dprintk("atp_geyser_init: read error\n");
@@ -271,7 +278,8 @@ static int atp_geyser_init(struct usb_device *udev)
 			dprintk("appletouch[%d]: %d\n", i, data[i]);
 
 		err("Failed to read mode from device.");
-		return -EIO;
+		ret = -EIO;
+		goto out_free;
 	}
 
 	/* Apply the mode switch */
@@ -281,7 +289,7 @@ static int atp_geyser_init(struct usb_device *udev)
 			ATP_GEYSER_MODE_WRITE_REQUEST_ID,
 			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 			ATP_GEYSER_MODE_REQUEST_VALUE,
-			ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+			ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
 
 	if (size != 8) {
 		dprintk("atp_geyser_init: write error\n");
@@ -289,9 +297,13 @@ static int atp_geyser_init(struct usb_device *udev)
 			dprintk("appletouch[%d]: %d\n", i, data[i]);
 
 		err("Failed to request geyser raw mode");
-		return -EIO;
+		ret = -EIO;
+		goto out_free;
 	}
-	return 0;
+	ret = 0;
+out_free:
+	kfree(data);
+	return ret;
 }
 
 /*
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 2998a6a..2d8fc0b 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -51,6 +51,10 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI	0x0230
 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO	0x0231
 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS	0x0232
+/* Macbook5,1 (unibody), aka wellspring3 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI	0x0236
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO	0x0237
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS	0x0238
 
 #define BCM5974_DEVICE(prod) {					\
 	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
@@ -72,6 +76,10 @@ static const struct usb_device_id bcm5974_table[] = {
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+	/* Macbook5,1 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
 	/* Terminating entry */
 	{}
 };
@@ -96,14 +104,23 @@ struct bt_data {
 	u8 rel_y;		/* relative y coordinate */
 };
 
-/* trackpad header structure */
-struct tp_header {
-	u8 unknown1[16];	/* constants, timers, etc */
-	u8 fingers;		/* number of fingers on trackpad */
-	u8 unknown2[9];		/* constants, timers, etc */
+/* trackpad header types */
+enum tp_type {
+	TYPE1,			/* plain trackpad */
+	TYPE2			/* button integrated in trackpad */
 };
 
-/* trackpad finger structure */
+/* trackpad finger data offsets, le16-aligned */
+#define FINGER_TYPE1		(13 * sizeof(__le16))
+#define FINGER_TYPE2		(15 * sizeof(__le16))
+
+/* trackpad button data offsets */
+#define BUTTON_TYPE2		15
+
+/* list of device capability bits */
+#define HAS_INTEGRATED_BUTTON	1
+
+/* trackpad finger structure, le16-aligned */
 struct tp_finger {
 	__le16 origin;		/* zero when switching track finger */
 	__le16 abs_x;		/* absolute x coodinate */
@@ -117,13 +134,11 @@ struct tp_finger {
 	__le16 force_minor;	/* trackpad force, minor axis? */
 	__le16 unused[3];	/* zeros */
 	__le16 multi;		/* one finger: varies, more fingers: constant */
-};
+} __attribute__((packed,aligned(2)));
 
-/* trackpad data structure, empirically at least ten fingers */
-struct tp_data {
-	struct tp_header header;
-	struct tp_finger finger[16];
-};
+/* trackpad finger data size, empirically at least ten fingers */
+#define SIZEOF_FINGER		sizeof(struct tp_finger)
+#define SIZEOF_ALL_FINGERS	(16 * SIZEOF_FINGER)
 
 /* device-specific parameters */
 struct bcm5974_param {
@@ -136,9 +151,12 @@ struct bcm5974_param {
 /* device-specific configuration */
 struct bcm5974_config {
 	int ansi, iso, jis;	/* the product id of this device */
+	int caps;		/* device capability bitmask */
 	int bt_ep;		/* the endpoint of the button interface */
 	int bt_datalen;		/* data length of the button interface */
 	int tp_ep;		/* the endpoint of the trackpad interface */
+	enum tp_type tp_type;	/* type of trackpad interface */
+	int tp_offset;		/* offset to trackpad finger data */
 	int tp_datalen;		/* data length of the trackpad interface */
 	struct bcm5974_param p;	/* finger pressure limits */
 	struct bcm5974_param w;	/* finger width limits */
@@ -158,7 +176,7 @@ struct bcm5974 {
 	struct urb *bt_urb;		/* button usb request block */
 	struct bt_data *bt_data;	/* button transferred data */
 	struct urb *tp_urb;		/* trackpad usb request block */
-	struct tp_data *tp_data;	/* trackpad transferred data */
+	u8 *tp_data;			/* trackpad transferred data */
 	int fingers;			/* number of fingers on trackpad */
 };
 
@@ -183,8 +201,9 @@ static const struct bcm5974_config bcm5974_config_table[] = {
 		USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
 		USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
 		USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+		0,
 		0x84, sizeof(struct bt_data),
-		0x81, sizeof(struct tp_data),
+		0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
 		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
 		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
 		{ DIM_X, DIM_X / SN_COORD, -4824, 5342 },
@@ -194,13 +213,26 @@ static const struct bcm5974_config bcm5974_config_table[] = {
 		USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
 		USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
 		USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+		0,
 		0x84, sizeof(struct bt_data),
-		0x81, sizeof(struct tp_data),
+		0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
 		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
 		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
 		{ DIM_X, DIM_X / SN_COORD, -4824, 4824 },
 		{ DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
 	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING3_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING3_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0x84, sizeof(struct bt_data),
+		0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4460, 5166 },
+		{ DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
+	},
 	{}
 };
 
@@ -257,6 +289,7 @@ static void setup_events_to_report(struct input_dev *input_dev,
 	__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 	__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
 	__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+	__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
 	__set_bit(BTN_LEFT, input_dev->keybit);
 }
 
@@ -266,6 +299,11 @@ static int report_bt_state(struct bcm5974 *dev, int size)
 	if (size != sizeof(struct bt_data))
 		return -EIO;
 
+	dprintk(7,
+		"bcm5974: button data: %x %x %x %x\n",
+		dev->bt_data->unknown1, dev->bt_data->button,
+		dev->bt_data->rel_x, dev->bt_data->rel_y);
+
 	input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
 	input_sync(dev->input);
 
@@ -276,29 +314,37 @@ static int report_bt_state(struct bcm5974 *dev, int size)
 static int report_tp_state(struct bcm5974 *dev, int size)
 {
 	const struct bcm5974_config *c = &dev->cfg;
-	const struct tp_finger *f = dev->tp_data->finger;
+	const struct tp_finger *f;
 	struct input_dev *input = dev->input;
-	const int fingers = (size - 26) / 28;
-	int raw_p, raw_w, raw_x, raw_y;
-	int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+	int raw_p, raw_w, raw_x, raw_y, raw_n;
+	int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0;
 	int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
 
-	if (size < 26 || (size - 26) % 28 != 0)
+	if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0)
 		return -EIO;
 
+	/* finger data, le16-aligned */
+	f = (const struct tp_finger *)(dev->tp_data + c->tp_offset);
+	raw_n = (size - c->tp_offset) / SIZEOF_FINGER;
+
 	/* always track the first finger; when detached, start over */
-	if (fingers) {
+	if (raw_n) {
 		raw_p = raw2int(f->force_major);
 		raw_w = raw2int(f->size_major);
 		raw_x = raw2int(f->abs_x);
 		raw_y = raw2int(f->abs_y);
 
 		dprintk(9,
-			"bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
-			raw_p, raw_w, raw_x, raw_y);
+			"bcm5974: "
+			"raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+			raw_p, raw_w, raw_x, raw_y, raw_n);
 
 		ptest = int2bound(&c->p, raw_p);
 		origin = raw2int(f->origin);
+
+		/* set the integrated button if applicable */
+		if (c->tp_type == TYPE2)
+			ibt = raw2int(dev->tp_data[BUTTON_TYPE2]);
 	}
 
 	/* while tracking finger still valid, count all fingers */
@@ -307,12 +353,13 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 		abs_w = int2bound(&c->w, raw_w);
 		abs_x = int2bound(&c->x, raw_x - c->x.devmin);
 		abs_y = int2bound(&c->y, c->y.devmax - raw_y);
-		for (; f != dev->tp_data->finger + fingers; f++) {
+		while (raw_n--) {
 			ptest = int2bound(&c->p, raw2int(f->force_major));
 			if (ptest > PRESSURE_LOW)
 				nmax++;
 			if (ptest > PRESSURE_HIGH)
 				nmin++;
+			f++;
 		}
 	}
 
@@ -324,7 +371,8 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 	input_report_key(input, BTN_TOUCH, dev->fingers > 0);
 	input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
 	input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
-	input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
+	input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3);
+	input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3);
 
 	input_report_abs(input, ABS_PRESSURE, abs_p);
 	input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
@@ -335,11 +383,15 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 
 		dprintk(8,
 			"bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
-			"nmin: %d nmax: %d n: %d\n",
-			abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+			"nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w,
+			abs_x, abs_y, nmin, nmax, dev->fingers, ibt);
 
 	}
 
+	/* type 2 reports button events via ibt only */
+	if (c->tp_type == TYPE2)
+		input_report_key(input, BTN_LEFT, ibt);
+
 	input_sync(input);
 
 	return 0;
@@ -649,6 +701,8 @@ static int bcm5974_probe(struct usb_interface *iface,
 	input_dev->name = "bcm5974";
 	input_dev->phys = dev->phys;
 	usb_to_input_id(dev->udev, &input_dev->id);
+	/* report driver capabilities via the version field */
+	input_dev->id.version = cfg->caps;
 	input_dev->dev.parent = &iface->dev;
 
 	input_set_drvdata(input_dev, dev);
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 6ab0eb1a..4bc78892 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1,7 +1,7 @@
 /*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
  *
- * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -178,6 +178,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 	struct elantech_data *etd = psmouse->private;
 	unsigned char *packet = psmouse->packet;
 	int fingers;
+	static int old_fingers;
 
 	if (etd->fw_version_maj == 0x01) {
 		/* byte 0:  D   U  p1  p2   1  p3   R   L
@@ -190,6 +191,14 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 		fingers = (packet[0] & 0xc0) >> 6;
 	}
 
+	if (etd->jumpy_cursor) {
+		/* Discard packets that are likely to have bogus coordinates */
+		if (fingers > old_fingers) {
+			elantech_debug("elantech.c: discarding packet\n");
+			goto discard_packet_v1;
+		}
+	}
+
 	input_report_key(dev, BTN_TOUCH, fingers != 0);
 
 	/* byte 2: x7  x6  x5  x4  x3  x2  x1  x0
@@ -216,6 +225,9 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 	}
 
 	input_sync(dev);
+
+ discard_packet_v1:
+	old_fingers = fingers;
 }
 
 /*
@@ -363,9 +375,14 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
 			rc = -1;
 			break;
 		}
+	}
+
+	if (rc == 0) {
 		/*
-		 * Read back reg 0x10. The touchpad is probably initalising
-		 * and not ready until we read back the value we just wrote.
+		 * Read back reg 0x10. For hardware version 1 we must make
+		 * sure the absolute mode bit is set. For hardware version 2
+		 * the touchpad is probably initalising and not ready until
+		 * we read back the value we just wrote.
 		 */
 		do {
 			rc = elantech_read_reg(psmouse, 0x10, &val);
@@ -373,12 +390,18 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
 				break;
 			tries--;
 			elantech_debug("elantech.c: retrying read (%d).\n",
-				tries);
+					tries);
 			msleep(ETP_READ_BACK_DELAY);
 		} while (tries > 0);
-		if (rc)
+
+		if (rc) {
 			pr_err("elantech.c: failed to read back register 0x10.\n");
-		break;
+		} else if (etd->hw_version == 1 &&
+			   !(val & ETP_R10_ABSOLUTE_MODE)) {
+			pr_err("elantech.c: touchpad refuses "
+				"to switch to absolute mode.\n");
+			rc = -1;
+		}
 	}
 
 	if (rc)
@@ -662,6 +685,17 @@ int elantech_init(struct psmouse *psmouse)
 		param[0], param[1], param[2]);
 	etd->capabilities = param[0];
 
+	/*
+	 * This firmware seems to suffer from misreporting coordinates when
+	 * a touch action starts causing the mouse cursor or scrolled page
+	 * to jump. Enable a workaround.
+	 */
+	if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) {
+		pr_info("elantech.c: firmware version 2.34 detected, "
+			"enabling jumpy cursor workaround\n");
+		etd->jumpy_cursor = 1;
+	}
+
 	if (elantech_set_absolute_mode(psmouse)) {
 		pr_err("elantech.c: failed to put touchpad into absolute mode.\n");
 		goto init_fail;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index bee282b..ed848cc 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -1,7 +1,7 @@
 /*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
  *
- * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -104,6 +104,7 @@ struct elantech_data {
 	unsigned char fw_version_min;
 	unsigned char hw_version;
 	unsigned char paritycheck;
+	unsigned char jumpy_cursor;
 	unsigned char parity[256];
 };
 
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index df81b0a..15ac320 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -61,6 +61,12 @@ static const struct dmi_system_id lifebook_dmi_table[] = {
 		},
 	},
 	{
+		.ident = "Lifebook B-2130",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"),
+		},
+	},
+	{
 		.ident = "Lifebook B213x/B2150",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
index 57953c0..f412c69 100644
--- a/drivers/input/serio/sa1111ps2.c
+++ b/drivers/input/serio/sa1111ps2.c
@@ -77,7 +77,7 @@ static irqreturn_t ps2_txint(int irq, void *dev_id)
 	spin_lock(&ps2if->lock);
 	status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
 	if (ps2if->head == ps2if->tail) {
-		disable_irq(irq);
+		disable_irq_nosync(irq);
 		/* done */
 	} else if (status & PS2STAT_TXE) {
 		sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index 677680e..9710bfd 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -11,7 +11,7 @@
  *  Copyright (c) 2000 Daniel Egger		<egger@suse.de>
  *  Copyright (c) 2001 Frederic Lepied		<flepied@mandrakesoft.com>
  *  Copyright (c) 2004 Panagiotis Issaris	<panagiotis.issaris@mech.kuleuven.ac.be>
- *  Copyright (c) 2002-2008 Ping Cheng		<pingc@wacom.com>
+ *  Copyright (c) 2002-2009 Ping Cheng		<pingc@wacom.com>
  *
  *  ChangeLog:
  *      v0.1 (vp)  - Initial release
@@ -67,6 +67,7 @@
  *      v1.47 (pc) - Added support for Bamboo
  *      v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
  *      v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
+ *      v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28
  */
 
 /*
@@ -87,7 +88,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.49"
+#define DRIVER_VERSION "v1.50"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
 #define DRIVER_LICENSE "GPL"
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 484496d..b8624f2 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -289,6 +289,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 			5000); /* 5 secs */
 	} while (result < 0 && limit++ < 5);
 
+	/* No need to parse the Descriptor. It isn't an error though */
 	if (result < 0)
 		goto out;
 
@@ -368,9 +369,8 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 		}
 	}
 
-	result = 0;
-
  out:
+	result = 0;
 	kfree(report);
 	return result;
 }
@@ -425,6 +425,15 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	endpoint = &intf->cur_altsetting->endpoint[0].desc;
 
+	/* Initialize touch_x_max and touch_y_max in case it is not defined */
+	if (wacom_wac->features->type == TABLETPC) {
+		features->touch_x_max = 1023;
+		features->touch_y_max = 1023;
+	} else {
+		features->touch_x_max = 0;
+		features->touch_y_max = 0;
+	}
+
 	/* TabletPC need to retrieve the physical and logical maximum from report descriptor */
 	if (wacom_wac->features->type == TABLETPC) {
 		if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 4ab0702..536668f 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -235,7 +235,7 @@ static irqreturn_t tsc2007_irq(int irq, void *handle)
 	spin_lock_irqsave(&ts->lock, flags);
 
 	if (likely(ts->get_pendown_state())) {
-		disable_irq(ts->irq);
+		disable_irq_nosync(ts->irq);
 		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
 					HRTIMER_MODE_REL);
 	}
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index e868264..f100c7f 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -256,7 +256,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
 	struct ucb1400_ts *ucb = devid;
 
 	if (irqnr == ucb->irq) {
-		disable_irq(ucb->irq);
+		disable_irq_nosync(ucb->irq);
 		ucb->irq_pending = 1;
 		wake_up(&ucb->ts_wait);
 		return IRQ_HANDLED;