summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorMasatake YAMATO <jet@gyve.org>2007-07-03 22:28:34 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-07-03 22:28:34 +0200
commitb42fa133110fa952299fa76cbe91226c14838261 (patch)
treed79f21a657f7145d12e7cee6118cf892a3e70561 /drivers
parent872aad45d6174570dd2e1defc3efee50f2cfcc72 (diff)
downloadop-kernel-dev-b42fa133110fa952299fa76cbe91226c14838261.zip
op-kernel-dev-b42fa133110fa952299fa76cbe91226c14838261.tar.gz
ide: never called printk statement in ide-taskfile.c::wait_drive_not_busy
Look at wait_drive_not_busy in drivers/ide/ide-taskfile.c: static u8 wait_drive_not_busy(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); int retries = 100; u8 stat; /* * Last sector was transfered, wait until drive is ready. * This can take up to 10 usec, but we will wait max 1 ms * (drive_cmd_intr() waits that long). */ while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) udelay(10); if (!retries) printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); return stat; } `printk' is never called because `retries' never holds zero at the outside of `while' loop: when `retries' holds zero at the while's loop condition, `retries' will hold -1 at the if condition. Signed-off-by: Masatake YAMATO <jet@gyve.org> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: joe@perches.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/ide-taskfile.c12
1 files changed, 8 insertions, 4 deletions
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 30175c7..aa06daf 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -238,7 +238,7 @@ EXPORT_SYMBOL(task_no_data_intr);
static u8 wait_drive_not_busy(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- int retries = 100;
+ int retries;
u8 stat;
/*
@@ -246,10 +246,14 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
* This can take up to 10 usec, but we will wait max 1 ms
* (drive_cmd_intr() waits that long).
*/
- while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--)
- udelay(10);
+ for (retries = 0; retries < 100; retries++) {
+ if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT)
+ udelay(10);
+ else
+ break;
+ }
- if (!retries)
+ if (stat & BUSY_STAT)
printk(KERN_ERR "%s: drive still BUSY!\n", drive->name);
return stat;
OpenPOWER on IntegriCloud