summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorHansjoerg Lipp <hjlipp@web.de>2006-03-26 01:38:34 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-03-26 08:57:05 -0800
commitcf7776dc05b89885a7ec6beff8409d48b077a3ac (patch)
tree78e825e65578526c3400e810759ba676d7014011 /drivers
parent982da5a196a0859eedc5ca1ff88feaf1bc6d6e4e (diff)
downloadop-kernel-dev-cf7776dc05b89885a7ec6beff8409d48b077a3ac.zip
op-kernel-dev-cf7776dc05b89885a7ec6beff8409d48b077a3ac.tar.gz
[PATCH] isdn4linux: Siemens Gigaset drivers - direct USB connection
And: Tilman Schmidt <tilman@imap.cc> This patch adds the main source file of the connection-specific module "bas_gigaset", the hardware driver for Gigaset base stations connected directly to the computer via USB. It contains the code for handling probe/disconnect, AT command/response transmission, and call setup and termination. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/isdn/gigaset/bas-gigaset.c2365
1 files changed, 2365 insertions, 0 deletions
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
new file mode 100644
index 0000000..31f0f07
--- /dev/null
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -0,0 +1,2365 @@
+/*
+ * USB driver for Gigaset 307x base via direct USB connection.
+ *
+ * Copyright (c) 2001 by Hansjoerg Lipp <hjlipp@web.de>,
+ * Tilman Schmidt <tilman@imap.cc>,
+ * Stefan Eilers <Eilers.Stefan@epost.de>.
+ *
+ * Based on usb-gigaset.c.
+ *
+ * =====================================================================
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ * =====================================================================
+ * ToDo: ...
+ * =====================================================================
+ * Version: $Id: bas-gigaset.c,v 1.52.4.19 2006/02/04 18:28:16 hjlipp Exp $
+ * =====================================================================
+ */
+
+#include "gigaset.h"
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+/* Version Information */
+#define DRIVER_AUTHOR "Tilman Schmidt <tilman@imap.cc>, Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers <Eilers.Stefan@epost.de>"
+#define DRIVER_DESC "USB Driver for Gigaset 307x"
+
+
+/* Module parameters */
+
+static int startmode = SM_ISDN;
+static int cidmode = 1;
+
+module_param(startmode, int, S_IRUGO);
+module_param(cidmode, int, S_IRUGO);
+MODULE_PARM_DESC(startmode, "start in isdn4linux mode");
+MODULE_PARM_DESC(cidmode, "Call-ID mode");
+
+#define GIGASET_MINORS 1
+#define GIGASET_MINOR 16
+#define GIGASET_MODULENAME "bas_gigaset"
+#define GIGASET_DEVFSNAME "gig/bas/"
+#define GIGASET_DEVNAME "ttyGB"
+
+#define IF_WRITEBUF 256 //FIXME
+
+/* Values for the Gigaset 307x */
+#define USB_GIGA_VENDOR_ID 0x0681
+#define USB_GIGA_PRODUCT_ID 0x0001
+#define USB_4175_PRODUCT_ID 0x0002
+#define USB_SX303_PRODUCT_ID 0x0021
+#define USB_SX353_PRODUCT_ID 0x0022
+
+/* table of devices that work with this driver */
+static struct usb_device_id gigaset_table [] = {
+ { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_GIGA_PRODUCT_ID) },
+ { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_4175_PRODUCT_ID) },
+ { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) },
+ { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX353_PRODUCT_ID) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, gigaset_table);
+
+/* Get a minor range for your devices from the usb maintainer */
+#define USB_SKEL_MINOR_BASE 200
+
+/*======================= local function prototypes =============================*/
+
+/* This function is called if a new device is connected to the USB port. It
+ * checks whether this new device belongs to this driver.
+ */
+static int gigaset_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+
+/* Function will be called if the device is unplugged */
+static void gigaset_disconnect(struct usb_interface *interface);
+
+
+/*==============================================================================*/
+
+struct bas_cardstate {
+ struct usb_device *udev; /* USB device pointer */
+ struct usb_interface *interface; /* interface for this device */
+ unsigned char minor; /* starting minor number */
+
+ struct urb *urb_ctrl; /* control pipe default URB */
+ struct usb_ctrlrequest dr_ctrl;
+ struct timer_list timer_ctrl; /* control request timeout */
+
+ struct timer_list timer_atrdy; /* AT command ready timeout */
+ struct urb *urb_cmd_out; /* for sending AT commands */
+ struct usb_ctrlrequest dr_cmd_out;
+ int retry_cmd_out;
+
+ struct urb *urb_cmd_in; /* for receiving AT replies */
+ struct usb_ctrlrequest dr_cmd_in;
+ struct timer_list timer_cmd_in; /* receive request timeout */
+ unsigned char *rcvbuf; /* AT reply receive buffer */
+
+ struct urb *urb_int_in; /* URB for interrupt pipe */
+ unsigned char int_in_buf[3];
+
+ spinlock_t lock; /* locks all following */
+ atomic_t basstate; /* bitmap (BS_*) */
+ int pending; /* uncompleted base request */
+ int rcvbuf_size; /* size of AT receive buffer */
+ /* 0: no receive in progress */
+ int retry_cmd_in; /* receive req retry count */
+};
+
+/* status of direct USB connection to 307x base (bits in basstate) */
+#define BS_ATOPEN 0x001
+#define BS_B1OPEN 0x002
+#define BS_B2OPEN 0x004
+#define BS_ATREADY 0x008
+#define BS_INIT 0x010
+#define BS_ATTIMER 0x020
+
+
+static struct gigaset_driver *driver = NULL;
+static struct cardstate *cardstate = NULL;
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver gigaset_usb_driver = {
+ .name = GIGASET_MODULENAME,
+ .probe = gigaset_probe,
+ .disconnect = gigaset_disconnect,
+ .id_table = gigaset_table,
+};
+
+/* get message text for USB status code
+ */
+static char *get_usb_statmsg(int status)
+{
+ static char unkmsg[28];
+
+ switch (status) {
+ case 0:
+ return "success";
+ case -ENOENT:
+ return "canceled";
+ case -ECONNRESET:
+ return "canceled (async)";
+ case -EINPROGRESS:
+ return "pending";
+ case -EPROTO:
+ return "bit stuffing or unknown USB error";
+ case -EILSEQ:
+ return "Illegal byte sequence (CRC mismatch)";
+ case -EPIPE:
+ return "babble detect or endpoint stalled";
+ case -ENOSR:
+ return "buffer error";
+ case -ETIMEDOUT:
+ return "timed out";
+ case -ENODEV:
+ return "device not present";
+ case -EREMOTEIO:
+ return "short packet detected";
+ case -EXDEV:
+ return "partial isochronous transfer";
+ case -EINVAL:
+ return "invalid argument";
+ case -ENXIO:
+ return "URB already queued";
+ case -EAGAIN:
+ return "isochronous start frame too early or too much scheduled";
+ case -EFBIG:
+ return "too many isochronous frames requested";
+ case -EMSGSIZE:
+ return "endpoint message size zero";
+ case -ESHUTDOWN:
+ return "endpoint shutdown";
+ case -EBUSY:
+ return "another request pending";
+ default:
+ snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", status);
+ return unkmsg;
+ }
+}
+
+/* usb_pipetype_str
+ * retrieve string representation of USB pipe type
+ */
+static inline char *usb_pipetype_str(int pipe)
+{
+ if (usb_pipeisoc(pipe))
+ return "Isoc";
+ if (usb_pipeint(pipe))
+ return "Int";
+ if (usb_pipecontrol(pipe))
+ return "Ctrl";
+ if (usb_pipebulk(pipe))
+ return "Bulk";
+ return "?";
+}
+
+/* dump_urb
+ * write content of URB to syslog for debugging
+ */
+static inline void dump_urb(enum debuglevel level, const char *tag,
+ struct urb *urb)
+{
+#ifdef CONFIG_GIGASET_DEBUG
+ int i;
+ IFNULLRET(tag);
+ dbg(level, "%s urb(0x%08lx)->{", tag, (unsigned long) urb);
+ if (urb) {
+ dbg(level,
+ " dev=0x%08lx, pipe=%s:EP%d/DV%d:%s, "
+ "status=%d, hcpriv=0x%08lx, transfer_flags=0x%x,",
+ (unsigned long) urb->dev,
+ usb_pipetype_str(urb->pipe),
+ usb_pipeendpoint(urb->pipe), usb_pipedevice(urb->pipe),
+ usb_pipein(urb->pipe) ? "in" : "out",
+ urb->status, (unsigned long) urb->hcpriv,
+ urb->transfer_flags);
+ dbg(level,
+ " transfer_buffer=0x%08lx[%d], actual_length=%d, "
+ "bandwidth=%d, setup_packet=0x%08lx,",
+ (unsigned long) urb->transfer_buffer,
+ urb->transfer_buffer_length, urb->actual_length,
+ urb->bandwidth, (unsigned long) urb->setup_packet);
+ dbg(level,
+ " start_frame=%d, number_of_packets=%d, interval=%d, "
+ "error_count=%d,",
+ urb->start_frame, urb->number_of_packets, urb->interval,
+ urb->error_count);
+ dbg(level,
+ " context=0x%08lx, complete=0x%08lx, iso_frame_desc[]={",
+ (unsigned long) urb->context,
+ (unsigned long) urb->complete);
+ for (i = 0; i < urb->number_of_packets; i++) {
+ struct usb_iso_packet_descriptor *pifd = &urb->iso_frame_desc[i];
+ dbg(level,
+ " {offset=%u, length=%u, actual_length=%u, "
+ "status=%u}",
+ pifd->offset, pifd->length, pifd->actual_length,
+ pifd->status);
+ }
+ }
+ dbg(level, "}}");
+#endif
+}
+
+/* read/set modem control bits etc. (m10x only) */
+static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
+ unsigned new_state)
+{
+ return -EINVAL;
+}
+
+static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
+{
+ return -EINVAL;
+}
+
+static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
+{
+ return -EINVAL;
+}
+
+/* error_hangup
+ * hang up any existing connection because of an unrecoverable error
+ * This function may be called from any context and takes care of scheduling
+ * the necessary actions for execution outside of interrupt context.
+ * argument:
+ * B channel control structure
+ */
+static inline void error_hangup(struct bc_state *bcs)
+{
+ struct cardstate *cs = bcs->cs;
+
+ dbg(DEBUG_ANY,
+ "%s: scheduling HUP for channel %d", __func__, bcs->channel);
+
+ if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) {
+ //FIXME what should we do?
+ return;
+ }
+
+ gigaset_schedule_event(cs);
+}
+
+/* error_reset
+ * reset Gigaset device because of an unrecoverable error
+ * This function may be called from any context and takes care of scheduling
+ * the necessary actions for execution outside of interrupt context.
+ * argument:
+ * controller state structure
+ */
+static inline void error_reset(struct cardstate *cs)
+{
+ //FIXME try to recover without bothering the user
+ err("unrecoverable error - please disconnect the Gigaset base to reset");
+}
+
+/* check_pending
+ * check for completion of pending control request
+ * parameter:
+ * urb USB request block of completed request
+ * urb->context = hardware specific controller state structure
+ */
+static void check_pending(struct bas_cardstate *ucs)
+{
+ unsigned long flags;
+
+ IFNULLRET(ucs);
+ IFNULLRET(cardstate);
+
+ spin_lock_irqsave(&ucs->lock, flags);
+ switch (ucs->pending) {
+ case 0:
+ break;
+ case HD_OPEN_ATCHANNEL:
+ if (atomic_read(&ucs->basstate) & BS_ATOPEN)
+ ucs->pending = 0;
+ break;
+ case HD_OPEN_B1CHANNEL:
+ if (atomic_read(&ucs->basstate) & BS_B1OPEN)
+ ucs->pending = 0;
+ break;
+ case HD_OPEN_B2CHANNEL:
+ if (atomic_read(&ucs->basstate) & BS_B2OPEN)
+ ucs->pending = 0;
+ break;
+ case HD_CLOSE_ATCHANNEL:
+ if (!(atomic_read(&ucs->basstate) & BS_ATOPEN))
+ ucs->pending = 0;
+ //wake_up_interruptible(cs->initwait);
+ //FIXME need own wait queue?
+ break;
+ case HD_CLOSE_B1CHANNEL:
+ if (!(atomic_read(&ucs->basstate) & BS_B1OPEN))
+ ucs->pending = 0;
+ break;
+ case HD_CLOSE_B2CHANNEL:
+ if (!(atomic_read(&ucs->basstate) & BS_B2OPEN))
+ ucs->pending = 0;
+ break;
+ case HD_DEVICE_INIT_ACK: /* no reply expected */
+ ucs->pending = 0;
+ break;
+ /* HD_READ_ATMESSAGE, HD_WRITE_ATMESSAGE, HD_RESET_INTERRUPTPIPE
+ * are handled separately and should never end up here
+ */
+ default:
+ warn("unknown pending request 0x%02x cleared", ucs->pending);
+ ucs->pending = 0;
+ }
+
+ if (!ucs->pending)
+ del_timer(&ucs->timer_ctrl);
+
+ spin_unlock_irqrestore(&ucs->lock, flags);
+}
+
+/* cmd_in_timeout
+ * timeout routine for command input request
+ * argument:
+ * controller state structure
+ */
+static void cmd_in_timeout(unsigned long data)
+{
+ struct cardstate *cs = (struct cardstate *) data;
+ struct bas_cardstate *ucs;
+ unsigned long flags;
+
+ IFNULLRET(cs);
+ ucs = cs->hw.bas;
+ IFNULLRET(ucs);
+
+ spin_lock_irqsave(&cs->lock, flags);
+ if (!atomic_read(&cs->connected)) {
+ dbg(DEBUG_USBREQ, "%s: disconnected", __func__);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return;
+ }
+ if (!ucs->rcvbuf_size) {
+ dbg(DEBUG_USBREQ, "%s: no receive in progress", __func__);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&cs->lock, flags);
+
+ err("timeout reading AT response");
+ error_reset(cs); //FIXME retry?
+}
+
+
+static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs);
+
+/* atread_submit
+ * submit an HD_READ_ATMESSAGE command URB
+ * parameters:
+ * cs controller state structure
+ * timeout timeout in 1/10 sec., 0: none
+ * return value:
+ * 0 on success
+ * -EINVAL if a NULL pointer is encountered somewhere
+ * -EBUSY if another request is pending
+ * any URB submission error code
+ */
+static int atread_submit(struct cardstate *cs, int timeout)
+{
+ struct bas_cardstate *ucs;
+ int ret;
+
+ IFNULLRETVAL(cs, -EINVAL);
+ ucs = cs->hw.bas;
+ IFNULLRETVAL(ucs, -EINVAL);
+ IFNULLRETVAL(ucs->urb_cmd_in, -EINVAL);
+
+ dbg(DEBUG_USBREQ, "-------> HD_READ_ATMESSAGE (%d)", ucs->rcvbuf_size);
+
+ if (ucs->urb_cmd_in->status == -EINPROGRESS) {
+ err("could not submit HD_READ_ATMESSAGE: URB busy");
+ return -EBUSY;
+ }
+
+ ucs->dr_cmd_in.bRequestType = IN_VENDOR_REQ;
+ ucs->dr_cmd_in.bRequest = HD_READ_ATMESSAGE;
+ ucs->dr_cmd_in.wValue = 0;
+ ucs->dr_cmd_in.wIndex = 0;
+ ucs->dr_cmd_in.wLength = cpu_to_le16(ucs->rcvbuf_size);
+ usb_fill_control_urb(ucs->urb_cmd_in, ucs->udev,
+ usb_rcvctrlpipe(ucs->udev, 0),
+ (unsigned char*) & ucs->dr_cmd_in,
+ ucs->rcvbuf, ucs->rcvbuf_size,
+ read_ctrl_callback, cs->inbuf);
+
+ if ((ret = usb_submit_urb(ucs->urb_cmd_in, SLAB_ATOMIC)) != 0) {
+ err("could not submit HD_READ_ATMESSAGE: %s",
+ get_usb_statmsg(ret));
+ return ret;
+ }
+
+ if (timeout > 0) {
+ dbg(DEBUG_USBREQ, "setting timeout of %d/10 secs", timeout);
+ ucs->timer_cmd_in.expires = jiffies + timeout * HZ / 10;
+ ucs->timer_cmd_in.data = (unsigned long) cs;
+ ucs->timer_cmd_in.function = cmd_in_timeout;
+ add_timer(&ucs->timer_cmd_in);
+ }
+ return 0;
+}
+
+static void stopurbs(struct bas_bc_state *);
+static int start_cbsend(struct cardstate *);
+
+/* set/clear bits in base connection state
+ */
+inline static void update_basstate(struct bas_cardstate *ucs,
+ int set, int clear)
+{
+ unsigned long flags;
+ int state;
+
+ spin_lock_irqsave(&ucs->lock, flags);
+ state = atomic_read(&ucs->basstate);
+ state &= ~clear;
+ state |= set;
+ atomic_set(&ucs->basstate, state);
+ spin_unlock_irqrestore(&ucs->lock, flags);
+}
+
+
+/* read_int_callback
+ * USB completion handler for interrupt pipe input
+ * called by the USB subsystem in interrupt context
+ * parameter:
+ * urb USB request block
+ * urb->context = controller state structure
+ */
+static void read_int_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct cardstate *cs;
+ struct bas_cardstate *ucs;
+ struct bc_state *bcs;
+ unsigned long flags;
+ int status;
+ unsigned l;
+ int channel;
+
+ IFNULLRET(urb);
+ cs = (struct cardstate *) urb->context;
+ IFNULLRET(cs);
+ ucs = cs->hw.bas;
+ IFNULLRET(ucs);
+
+ if (unlikely(!atomic_read(&cs->connected))) {
+ warn("%s: disconnected", __func__);
+ return;
+ }
+
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+ case -ENOENT: /* canceled */
+ case -ECONNRESET: /* canceled (async) */
+ case -EINPROGRESS: /* pending */
+ /* ignore silently */
+ dbg(DEBUG_USBREQ,
+ "%s: %s", __func__, get_usb_statmsg(urb->status));
+ return;
+ default: /* severe trouble */
+ warn("interrupt read: %s", get_usb_statmsg(urb->status));
+ //FIXME corrective action? resubmission always ok?
+ goto resubmit;
+ }
+
+ l = (unsigned) ucs->int_in_buf[1] +
+ (((unsigned) ucs->int_in_buf[2]) << 8);
+
+ dbg(DEBUG_USBREQ,
+ "<-------%d: 0x%02x (%u [0x%02x 0x%02x])", urb->actual_length,
+ (int)ucs->int_in_buf[0], l,
+ (int)ucs->int_in_buf[1], (int)ucs->int_in_buf[2]);
+
+ channel = 0;
+
+ switch (ucs->int_in_buf[0]) {
+ case HD_DEVICE_INIT_OK:
+ update_basstate(ucs, BS_INIT, 0);
+ break;
+
+ case HD_READY_SEND_ATDATA:
+ del_timer(&ucs->timer_atrdy);
+ update_basstate(ucs, BS_ATREADY, BS_ATTIMER);
+ start_cbsend(cs);
+ break;
+
+ case HD_OPEN_B2CHANNEL_ACK:
+ ++channel;
+ case HD_OPEN_B1CHANNEL_ACK:
+ bcs = cs->bcs + channel;
+ update_basstate(ucs, BS_B1OPEN << channel, 0);
+ gigaset_bchannel_up(bcs);
+ break;
+
+ case HD_OPEN_ATCHANNEL_ACK:
+ update_basstate(ucs, BS_ATOPEN, 0);
+ start_cbsend(cs);
+ break;
+
+ case HD_CLOSE_B2CHANNEL_ACK:
+ ++channel;
+ case HD_CLOSE_B1CHANNEL_ACK:
+ bcs = cs->bcs + channel;
+ update_basstate(ucs, 0, BS_B1OPEN << channel);
+ stopurbs(bcs->hw.bas);
+ gigaset_bchannel_down(bcs);
+ break;
+
+ case HD_CLOSE_ATCHANNEL_ACK:
+ update_basstate(ucs, 0, BS_ATOPEN);
+ break;
+
+ case HD_B2_FLOW_CONTROL:
+ ++channel;
+ case HD_B1_FLOW_CONTROL:
+ bcs = cs->bcs + channel;
+ atomic_add((l - BAS_NORMFRAME) * BAS_CORRFRAMES,
+ &bcs->hw.bas->corrbytes);
+ dbg(DEBUG_ISO,
+ "Flow control (channel %d, sub %d): 0x%02x => %d",
+ channel, bcs->hw.bas->numsub, l,
+ atomic_read(&bcs->hw.bas->corrbytes));
+ break;
+
+ case HD_RECEIVEATDATA_ACK: /* AT response ready to be received */
+ if (!l) {
+ warn("HD_RECEIVEATDATA_ACK with length 0 ignored");
+ break;
+ }
+ spin_lock_irqsave(&cs->lock, flags);
+ if (ucs->rcvbuf_size) {
+ spin_unlock_irqrestore(&cs->lock, flags);
+ err("receive AT data overrun, %d bytes lost", l);
+ error_reset(cs); //FIXME reschedule
+ break;
+ }
+ if ((ucs->rcvbuf = kmalloc(l, GFP_ATOMIC)) == NULL) {
+ spin_unlock_irqrestore(&cs->lock, flags);
+ err("%s: out of memory, %d bytes lost", __func__, l);
+ error_reset(cs); //FIXME reschedule
+ break;
+ }
+ ucs->rcvbuf_size = l;
+ ucs->retry_cmd_in = 0;
+ if ((status = atread_submit(cs, BAS_TIMEOUT)) < 0) {
+ kfree(ucs->rcvbuf);
+ ucs->rcvbuf = NULL;
+ ucs->rcvbuf_size = 0;
+ error_reset(cs); //FIXME reschedule
+ }
+ spin_unlock_irqrestore(&cs->lock, flags);
+ break;
+
+ case HD_RESET_INTERRUPT_PIPE_ACK:
+ dbg(DEBUG_USBREQ, "HD_RESET_INTERRUPT_PIPE_ACK");
+ break;
+
+ case HD_SUSPEND_END:
+ dbg(DEBUG_USBREQ, "HD_SUSPEND_END");
+ break;
+
+ default:
+ warn("unknown Gigaset signal 0x%02x (%u) ignored",
+ (int) ucs->int_in_buf[0], l);
+ }
+
+ check_pending(ucs);
+
+resubmit:
+ status = usb_submit_urb(urb, SLAB_ATOMIC);
+ if (unlikely(status)) {
+ err("could not resubmit interrupt URB: %s",
+ get_usb_statmsg(status));
+ error_reset(cs);
+ }
+}
+
+/* read_ctrl_callback
+ * USB completion handler for control pipe input
+ * called by the USB subsystem in interrupt context
+ * parameter:
+ * urb USB request block
+ * urb->context = inbuf structure for controller state
+ */
+static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct cardstate *cs;
+ struct bas_cardstate *ucs;
+ unsigned numbytes;
+ unsigned long flags;
+ struct inbuf_t *inbuf;
+ int have_data = 0;
+
+ IFNULLRET(urb);
+ inbuf = (struct inbuf_t *) urb->context;
+ IFNULLRET(inbuf);
+ cs = inbuf->cs;
+ IFNULLRET(cs);
+ ucs = cs->hw.bas;
+ IFNULLRET(ucs);
+
+ spin_lock_irqsave(&cs->lock, flags);
+ if (!atomic_read(&cs->connected)) {
+ warn("%s: disconnected", __func__);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return;
+ }
+
+ if (!ucs->rcvbuf_size) {
+ warn("%s: no receive in progress", __func__);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return;
+ }
+
+ del_timer(&ucs->timer_cmd_in);
+
+ switch (urb->status) {
+ case 0: /* normal completion */
+ numbytes = urb->actual_length;
+ if (unlikely(numbytes == 0)) {
+ warn("control read: empty block received");
+ goto retry;
+ }
+ if (unlikely(numbytes != ucs->rcvbuf_size)) {
+ warn("control read: received %d chars, expected %d",
+ numbytes, ucs->rcvbuf_size);
+ if (numbytes > ucs->rcvbuf_size)
+ numbytes = ucs->rcvbuf_size;
+ }
+
+ /* copy received bytes to inbuf */
+ have_data = gigaset_fill_inbuf(inbuf, ucs->rcvbuf, numbytes);
+
+ if (unlikely(numbytes < ucs->rcvbuf_size)) {
+ /* incomplete - resubmit for remaining bytes */
+ ucs->rcvbuf_size -= numbytes;
+ ucs->retry_cmd_in = 0;
+ goto retry;
+ }
+ break;
+
+ case -ENOENT: /* canceled */
+ case -ECONNRESET: /* canceled (async) */
+ case -EINPROGRESS: /* pending */
+ /* no action necessary */
+ dbg(DEBUG_USBREQ,
+ "%s: %s", __func__, get_usb_statmsg(urb->status));
+ break;
+
+ default: /* severe trouble */
+ warn("control read: %s", get_usb_statmsg(urb->status));
+ retry:
+ if (ucs->retry_cmd_in++ < BAS_RETRY) {
+ notice("control read: retry %d", ucs->retry_cmd_in);
+ if (atread_submit(cs, BAS_TIMEOUT) >= 0) {
+ /* resubmitted - bypass regular exit block */
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return;
+ }
+ } else {
+ err("control read: giving up after %d tries",
+ ucs->retry_cmd_in);
+ }
+ error_reset(cs);
+ }
+
+ kfree(ucs->rcvbuf);
+ ucs->rcvbuf = NULL;
+ ucs->rcvbuf_size = 0;
+ spin_unlock_irqrestore(&cs->lock, flags);
+ if (have_data) {
+ dbg(DEBUG_INTR, "%s-->BH", __func__);
+ gigaset_schedule_event(cs);
+ }
+}
+
+/* read_iso_callback
+ * USB completion handler for B channel isochronous input
+ * called by the USB subsystem in interrupt context
+ * parameter:
+ * urb USB request block of completed request
+ * urb->context = bc_state structure
+ */
+static void read_iso_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct bc_state *bcs;
+ struct bas_bc_state *ubc;
+ unsigned long flags;
+ int i, rc;
+
+ IFNULLRET(urb);
+ IFNULLRET(urb->context);
+ IFNULLRET(cardstate);
+
+ /* status codes not worth bothering the tasklet with */
+ if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET ||
+ urb->status == -EINPROGRESS)) {
+ dbg(DEBUG_ISO,
+ "%s: %s", __func__, get_usb_statmsg(urb->status));
+ return;
+ }
+
+ bcs = (struct bc_state *) urb->context;
+ ubc = bcs->hw.bas;
+ IFNULLRET(ubc);
+
+ spin_lock_irqsave(&ubc->isoinlock, flags);
+ if (likely(ubc->isoindone == NULL)) {
+ /* pass URB to tasklet */
+ ubc->isoindone = urb;
+ tasklet_schedule(&ubc->rcvd_tasklet);
+ } else {
+ /* tasklet still busy, drop data and resubmit URB */
+ ubc->loststatus = urb->status;
+ for (i = 0; i < BAS_NUMFRAMES; i++) {
+ ubc->isoinlost += urb->iso_frame_desc[i].actual_length;
+ if (unlikely(urb->iso_frame_desc[i].status != 0 &&
+ urb->iso_frame_desc[i].status != -EINPROGRESS)) {
+ ubc->loststatus = urb->iso_frame_desc[i].status;
+ }
+ urb->iso_frame_desc[i].status = 0;
+ urb->iso_frame_desc[i].actual_length = 0;
+ }
+ if (likely(atomic_read(&ubc->running))) {
+ urb->dev = bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->number_of_packets = BAS_NUMFRAMES;
+ dbg(DEBUG_ISO, "%s: isoc read overrun/resubmit", __func__);
+ rc = usb_submit_urb(urb, SLAB_ATOMIC);
+ if (unlikely(rc != 0)) {
+ err("could not resubmit isochronous read URB: %s",
+ get_usb_statmsg(rc));
+ dump_urb(DEBUG_ISO, "isoc read", urb);
+ error_hangup(bcs);
+ }
+ }
+ }
+ spin_unlock_irqrestore(&ubc->isoinlock, flags);
+}
+
+/* write_iso_callback
+ * USB completion handler for B channel isochronous output
+ * called by the USB subsystem in interrupt context
+ * parameter:
+ * urb USB request block of completed request
+ * urb->context = isow_urbctx_t structure
+ */
+static void write_iso_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct isow_urbctx_t *ucx;
+ struct bas_bc_state *ubc;
+ unsigned long flags;
+
+ IFNULLRET(urb);
+ IFNULLRET(urb->context);
+ IFNULLRET(cardstate);
+
+ /* status codes not worth bothering the tasklet with */
+ if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET ||
+ urb->status == -EINPROGRESS)) {
+ dbg(DEBUG_ISO,
+ "%s: %s", __func__, get_usb_statmsg(urb->status));
+ return;
+ }
+
+ /* pass URB context to tasklet */
+ ucx = (struct isow_urbctx_t *) urb->context;
+ IFNULLRET(ucx->bcs);
+ ubc = ucx->bcs->hw.bas;
+ IFNULLRET(ubc);
+
+ spin_lock_irqsave(&ubc->isooutlock, flags);
+ ubc->isooutovfl = ubc->isooutdone;
+ ubc->isooutdone = ucx;
+ spin_unlock_irqrestore(&ubc->isooutlock, flags);
+ tasklet_schedule(&ubc->sent_tasklet);
+}
+
+/* starturbs
+ * prepare and submit USB request blocks for isochronous input and output
+ * argument:
+ * B channel control structure
+ * return value:
+ * 0 on success
+ * < 0 on error (no URBs submitted)
+ */
+static int starturbs(struct bc_state *bcs)
+{
+ struct urb *urb;
+ struct bas_bc_state *ubc;
+ int j, k;
+ int rc;
+
+ IFNULLRETVAL(bcs, -EFAULT);
+ ubc = bcs->hw.bas;
+ IFNULLRETVAL(ubc, -EFAULT);
+
+ /* initialize L2 reception */
+ if (bcs->proto2 == ISDN_PROTO_L2_HDLC)
+ bcs->inputstate |= INS_flag_hunt;
+
+ /* submit all isochronous input URBs */
+ atomic_set(&ubc->running, 1);
+ for (k = 0; k < BAS_INURBS; k++) {
+ urb = ubc->isoinurbs[k];
+ if (!urb) {
+ err("isoinurbs[%d]==NULL", k);
+ rc = -EFAULT;
+ goto error;
+ }
+
+ urb->dev = bcs->cs->hw.bas->udev;
+ urb->pipe = usb_rcvisocpipe(urb->dev, 3 + 2 * bcs->channel);
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->transfer_buffer = ubc->isoinbuf + k * BAS_INBUFSIZE;
+ urb->transfer_buffer_length = BAS_INBUFSIZE;
+ urb->number_of_packets = BAS_NUMFRAMES;
+ urb->interval = BAS_FRAMETIME;
+ urb->complete = read_iso_callback;
+ urb->context = bcs;
+ for (j = 0; j < BAS_NUMFRAMES; j++) {
+ urb->iso_frame_desc[j].offset = j * BAS_MAXFRAME;
+ urb->iso_frame_desc[j].length = BAS_MAXFRAME;
+ urb->iso_frame_desc[j].status = 0;
+ urb->iso_frame_desc[j].actual_length = 0;
+ }
+
+ dump_urb(DEBUG_ISO, "Initial isoc read", urb);
+ if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) {
+ err("could not submit isochronous read URB %d: %s",
+ k, get_usb_statmsg(rc));
+ goto error;
+ }
+ }
+
+ /* initialize L2 transmission */
+ gigaset_isowbuf_init(ubc->isooutbuf, PPP_FLAG);
+
+ /* set up isochronous output URBs for flag idling */
+ for (k = 0; k < BAS_OUTURBS; ++k) {
+ urb = ubc->isoouturbs[k].urb;
+ if (!urb) {
+ err("isoouturbs[%d].urb==NULL", k);
+ rc = -EFAULT;
+ goto error;
+ }
+ urb->dev = bcs->cs->hw.bas->udev;
+ urb->pipe = usb_sndisocpipe(urb->dev, 4 + 2 * bcs->channel);
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->transfer_buffer = ubc->isooutbuf->data;
+ urb->transfer_buffer_length = sizeof(ubc->isooutbuf->data);
+ urb->number_of_packets = BAS_NUMFRAMES;
+ urb->interval = BAS_FRAMETIME;
+ urb->complete = write_iso_callback;
+ urb->context = &ubc->isoouturbs[k];
+ for (j = 0; j < BAS_NUMFRAMES; ++j) {
+ urb->iso_frame_desc[j].offset = BAS_OUTBUFSIZE;
+ urb->iso_frame_desc[j].length = BAS_NORMFRAME;
+ urb->iso_frame_desc[j].status = 0;
+ urb->iso_frame_desc[j].actual_length = 0;
+ }
+ ubc->isoouturbs[k].limit = -1;
+ }
+
+ /* submit two URBs, keep third one */
+ for (k = 0; k < 2; ++k) {
+ dump_urb(DEBUG_ISO, "Initial isoc write", urb);
+ rc = usb_submit_urb(ubc->isoouturbs[k].urb, SLAB_ATOMIC);
+ if (rc != 0) {
+ err("could not submit isochronous write URB %d: %s",
+ k, get_usb_statmsg(rc));
+ goto error;
+ }
+ }
+ dump_urb(DEBUG_ISO, "Initial isoc write (free)", urb);
+ ubc->isooutfree = &ubc->isoouturbs[2];
+ ubc->isooutdone = ubc->isooutovfl = NULL;
+ return 0;
+ error:
+ stopurbs(ubc);
+ return rc;
+}
+
+/* stopurbs
+ * cancel the USB request blocks for isochronous input and output
+ * errors are silently ignored
+ * argument:
+ * B channel control structure
+ */
+static void stopurbs(struct bas_bc_state *ubc)
+{
+ int k, rc;
+
+ IFNULLRET(ubc);
+
+ atomic_set(&ubc->running, 0);
+
+ for (k = 0; k < BAS_INURBS; ++k) {
+ rc = usb_unlink_urb(ubc->isoinurbs[k]);
+ dbg(DEBUG_ISO, "%s: isoc input URB %d unlinked, result = %d",
+ __func__, k, rc);
+ }
+
+ for (k = 0; k < BAS_OUTURBS; ++k) {
+ rc = usb_unlink_urb(ubc->isoouturbs[k].urb);
+ dbg(DEBUG_ISO, "%s: isoc output URB %d unlinked, result = %d",
+ __func__, k, rc);
+ }
+}
+
+/* Isochronous Write - Bottom Half */
+/* =============================== */
+
+/* submit_iso_write_urb
+ * fill and submit the next isochronous write URB
+ * parameters:
+ * bcs B channel state structure
+ * return value:
+ * number of frames submitted in URB
+ * 0 if URB not submitted because no data available (isooutbuf busy)
+ * error code < 0 on error
+ */
+static int submit_iso_write_urb(struct isow_urbctx_t *ucx)
+{
+ struct urb *urb;
+ struct bas_bc_state *ubc;
+ struct usb_iso_packet_descriptor *ifd;
+ int corrbytes, nframe, rc;
+
+ IFNULLRETVAL(ucx, -EFAULT);
+ urb = ucx->urb;
+ IFNULLRETVAL(urb, -EFAULT);
+ IFNULLRETVAL(ucx->bcs, -EFAULT);
+ ubc = ucx->bcs->hw.bas;
+ IFNULLRETVAL(ubc, -EFAULT);
+
+ urb->dev = ucx->bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->transfer_buffer = ubc->isooutbuf->data;
+ urb->transfer_buffer_length = sizeof(ubc->isooutbuf->data);
+
+ for (nframe = 0; nframe < BAS_NUMFRAMES; nframe++) {
+ ifd = &urb->iso_frame_desc[nframe];
+
+ /* compute frame length according to flow control */
+ ifd->length = BAS_NORMFRAME;
+ if ((corrbytes = atomic_read(&ubc->corrbytes)) != 0) {
+ dbg(DEBUG_ISO, "%s: corrbytes=%d", __func__, corrbytes);
+ if (corrbytes > BAS_HIGHFRAME - BAS_NORMFRAME)
+ corrbytes = BAS_HIGHFRAME - BAS_NORMFRAME;
+ else if (corrbytes < BAS_LOWFRAME - BAS_NORMFRAME)
+ corrbytes = BAS_LOWFRAME - BAS_NORMFRAME;
+ ifd->length += corrbytes;
+ atomic_add(-corrbytes, &ubc->corrbytes);
+ }
+ //dbg(DEBUG_ISO, "%s: frame %d length=%d", __func__, nframe, ifd->length);
+
+ /* retrieve block of data to send */
+ ifd->offset = gigaset_isowbuf_getbytes(ubc->isooutbuf, ifd->length);
+ if (ifd->offset < 0) {
+ if (ifd->offset == -EBUSY) {
+ dbg(DEBUG_ISO, "%s: buffer busy at frame %d",
+ __func__, nframe);
+ /* tasklet will be restarted from gigaset_send_skb() */
+ } else {
+ err("%s: buffer error %d at frame %d",
+ __func__, ifd->offset, nframe);
+ return ifd->offset;
+ }
+ break;
+ }
+ ucx->limit = atomic_read(&ubc->isooutbuf->nextread);
+ ifd->status = 0;
+ ifd->actual_length = 0;
+ }
+ if ((urb->number_of_packets = nframe) > 0) {
+ if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) {
+ err("could not submit isochronous write URB: %s",
+ get_usb_statmsg(rc));
+ dump_urb(DEBUG_ISO, "isoc write", urb);
+ return rc;
+ }
+ ++ubc->numsub;
+ }
+ return nframe;
+}
+
+/* write_iso_tasklet
+ * tasklet scheduled when an isochronous output URB from the Gigaset device
+ * has completed
+ * parameter:
+ * data B channel state structure
+ */
+static void write_iso_tasklet(unsigned long data)
+{
+ struct bc_state *bcs;
+ struct bas_bc_state *ubc;
+ struct cardstate *cs;
+ struct isow_urbctx_t *done, *next, *ovfl;
+ struct urb *urb;
+ struct usb_iso_packet_descriptor *ifd;
+ int offset;
+ unsigned long flags;
+ int i;
+ struct sk_buff *skb;
+ int len;
+
+ bcs = (struct bc_state *) data;
+ IFNULLRET(bcs);
+ ubc = bcs->hw.bas;
+ IFNULLRET(ubc);
+ cs = bcs->cs;
+ IFNULLRET(cs);
+
+ /* loop while completed URBs arrive in time */
+ for (;;) {
+ if (unlikely(!atomic_read(&cs->connected))) {
+ warn("%s: disconnected", __func__);
+ return;
+ }
+
+ if (unlikely(!(atomic_read(&ubc->running)))) {
+ dbg(DEBUG_ISO, "%s: not running", __func__);
+ return;
+ }
+
+ /* retrieve completed URBs */
+ spin_lock_irqsave(&ubc->isooutlock, flags);
+ done = ubc->isooutdone;
+ ubc->isooutdone = NULL;
+ ovfl = ubc->isooutovfl;
+ ubc->isooutovfl = NULL;
+ spin_unlock_irqrestore(&ubc->isooutlock, flags);
+ if (ovfl) {
+ err("isochronous write buffer underrun - buy a faster machine :-)");
+ error_hangup(bcs);
+ break;
+ }
+ if (!done)
+ break;
+
+ /* submit free URB if available */
+ spin_lock_irqsave(&ubc->isooutlock, flags);
+ next = ubc->isooutfree;
+ ubc->isooutfree = NULL;
+ spin_unlock_irqrestore(&ubc->isooutlock, flags);
+ if (next) {
+ if (submit_iso_write_urb(next) <= 0) {
+ /* could not submit URB, put it back */
+ spin_lock_irqsave(&ubc->isooutlock, flags);
+ if (ubc->isooutfree == NULL) {
+ ubc->isooutfree = next;
+ next = NULL;
+ }
+ spin_unlock_irqrestore(&ubc->isooutlock, flags);
+ if (next) {
+ /* couldn't put it back */
+ err("losing isochronous write URB");
+ error_hangup(bcs);
+ }
+ }
+ }
+
+ /* process completed URB */
+ urb = done->urb;
+ switch (urb->status) {
+ case 0: /* normal completion */
+ break;
+ case -EXDEV: /* inspect individual frames */
+ /* assumptions (for lack of documentation):
+ * - actual_length bytes of the frame in error are successfully sent
+ * - all following frames are not sent at all
+ */
+ dbg(DEBUG_ISO, "%s: URB partially completed", __func__);
+ offset = done->limit; /* just in case */
+ for (i = 0; i < BAS_NUMFRAMES; i++) {
+ ifd = &urb->iso_frame_desc[i];
+ if (ifd->status ||
+ ifd->actual_length != ifd->length) {
+ warn("isochronous write: frame %d: %s, "
+ "only %d of %d bytes sent",
+ i, get_usb_statmsg(ifd->status),
+ ifd->actual_length, ifd->length);
+ offset = (ifd->offset +
+ ifd->actual_length)
+ % BAS_OUTBUFSIZE;
+ break;
+ }
+ }
+#ifdef CONFIG_GIGASET_DEBUG
+ /* check assumption on remaining frames */
+ for (; i < BAS_NUMFRAMES; i++) {
+ ifd = &urb->iso_frame_desc[i];
+ if (ifd->status != -EINPROGRESS
+ || ifd->actual_length != 0) {
+ warn("isochronous write: frame %d: %s, "
+ "%d of %d bytes sent",
+ i, get_usb_statmsg(ifd->status),
+ ifd->actual_length, ifd->length);
+ offset = (ifd->offset +
+ ifd->actual_length)
+ % BAS_OUTBUFSIZE;
+ break;
+ }
+ }
+#endif
+ break;
+ case -EPIPE: //FIXME is this the code for "underrun"?
+ err("isochronous write stalled");
+ error_hangup(bcs);
+ break;
+ default: /* severe trouble */
+ warn("isochronous write: %s",
+ get_usb_statmsg(urb->status));
+ }
+
+ /* mark the write buffer area covered by this URB as free */
+ if (done->limit >= 0)
+ atomic_set(&ubc->isooutbuf->read, done->limit);
+
+ /* mark URB as free */
+ spin_lock_irqsave(&ubc->isooutlock, flags);
+ next = ubc->isooutfree;
+ ubc->isooutfree = done;
+ spin_unlock_irqrestore(&ubc->isooutlock, flags);
+ if (next) {
+ /* only one URB still active - resubmit one */
+ if (submit_iso_write_urb(next) <= 0) {
+ /* couldn't submit */
+ error_hangup(bcs);
+ }
+ }
+ }
+
+ /* process queued SKBs */
+ while ((skb = skb_dequeue(&bcs->squeue))) {
+ /* copy to output buffer, doing L2 encapsulation */
+ len = skb->len;
+ if (gigaset_isoc_buildframe(bcs, skb->data, len) == -EAGAIN) {
+ /* insufficient buffer space, push back onto queue */
+ skb_queue_head(&bcs->squeue, skb);
+ dbg(DEBUG_ISO, "%s: skb requeued, qlen=%d",
+ __func__, skb_queue_len(&bcs->squeue));
+ break;
+ }
+ skb_pull(skb, len);
+ gigaset_skb_sent(bcs, skb);
+ dev_kfree_skb_any(skb);
+ }
+}
+
+/* Isochronous Read - Bottom Half */
+/* ============================== */
+
+/* read_iso_tasklet
+ * tasklet scheduled when an isochronous input URB from the Gigaset device
+ * has completed
+ * parameter:
+ * data B channel state structure
+ */
+static void read_iso_tasklet(unsigned long data)
+{
+ struct bc_state *bcs;
+ struct bas_bc_state *ubc;
+ struct cardstate *cs;
+ struct urb *urb;
+ char *rcvbuf;
+ unsigned long flags;
+ int totleft, numbytes, offset, frame, rc;
+
+ bcs = (struct bc_state *) data;
+ IFNULLRET(bcs);
+ ubc = bcs->hw.bas;
+ IFNULLRET(ubc);
+ cs = bcs->cs;
+ IFNULLRET(cs);
+
+ /* loop while more completed URBs arrive in the meantime */
+ for (;;) {
+ if (!atomic_read(&cs->connected)) {
+ warn("%s: disconnected", __func__);
+ return;
+ }
+
+ /* retrieve URB */
+ spin_lock_irqsave(&ubc->isoinlock, flags);
+ if (!(urb = ubc->isoindone)) {
+ spin_unlock_irqrestore(&ubc->isoinlock, flags);
+ return;
+ }
+ ubc->isoindone = NULL;
+ if (unlikely(ubc->loststatus != -EINPROGRESS)) {
+ warn("isochronous read overrun, dropped URB with status: %s, %d bytes lost",
+ get_usb_statmsg(ubc->loststatus), ubc->isoinlost);
+ ubc->loststatus = -EINPROGRESS;
+ }
+ spin_unlock_irqrestore(&ubc->isoinlock, flags);
+
+ if (unlikely(!(atomic_read(&ubc->running)))) {
+ dbg(DEBUG_ISO, "%s: channel not running, dropped URB with status: %s",
+ __func__, get_usb_statmsg(urb->status));
+ return;
+ }
+
+ switch (urb->status) {
+ case 0: /* normal completion */
+ break;
+ case -EXDEV: /* inspect individual frames (we do that anyway) */
+ dbg(DEBUG_ISO, "%s: URB partially completed", __func__);
+ break;
+ case -ENOENT:
+ case -ECONNRESET:
+ dbg(DEBUG_ISO, "%s: URB canceled", __func__);
+ continue; /* -> skip */
+ case -EINPROGRESS: /* huh? */
+ dbg(DEBUG_ISO, "%s: URB still pending", __func__);
+ continue; /* -> skip */
+ case -EPIPE:
+ err("isochronous read stalled");
+ error_hangup(bcs);
+ continue; /* -> skip */
+ default: /* severe trouble */
+ warn("isochronous read: %s",
+ get_usb_statmsg(urb->status));
+ goto error;
+ }
+
+ rcvbuf = urb->transfer_buffer;
+ totleft = urb->actual_length;
+ for (frame = 0; totleft > 0 && frame < BAS_NUMFRAMES; frame++) {
+ if (unlikely(urb->iso_frame_desc[frame].status)) {
+ warn("isochronous read: frame %d: %s",
+ frame, get_usb_statmsg(urb->iso_frame_desc[frame].status));
+ break;
+ }
+ numbytes = urb->iso_frame_desc[frame].actual_length;
+ if (unlikely(numbytes > BAS_MAXFRAME)) {
+ warn("isochronous read: frame %d: numbytes (%d) > BAS_MAXFRAME",
+ frame, numbytes);
+ break;
+ }
+ if (unlikely(numbytes > totleft)) {
+ warn("isochronous read: frame %d: numbytes (%d) > totleft (%d)",
+ frame, numbytes, totleft);
+ break;
+ }
+ offset = urb->iso_frame_desc[frame].offset;
+ if (unlikely(offset + numbytes > BAS_INBUFSIZE)) {
+ warn("isochronous read: frame %d: offset (%d) + numbytes (%d) > BAS_INBUFSIZE",
+ frame, offset, numbytes);
+ break;
+ }
+ gigaset_isoc_receive(rcvbuf + offset, numbytes, bcs);
+ totleft -= numbytes;
+ }
+ if (unlikely(totleft > 0))
+ warn("isochronous read: %d data bytes missing",
+ totleft);
+
+ error:
+ /* URB processed, resubmit */
+ for (frame = 0; frame < BAS_NUMFRAMES; frame++) {
+ urb->iso_frame_desc[frame].status = 0;
+ urb->iso_frame_desc[frame].actual_length = 0;
+ }
+ urb->dev = bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->number_of_packets = BAS_NUMFRAMES;
+ if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) {
+ err("could not resubmit isochronous read URB: %s",
+ get_usb_statmsg(rc));
+ dump_urb(DEBUG_ISO, "resubmit iso read", urb);
+ error_hangup(bcs);
+ }
+ }
+}
+
+/* Channel Operations */
+/* ================== */
+
+/* req_timeout
+ * timeout routine for control output request
+ * argument:
+ * B channel control structure
+ */
+static void req_timeout(unsigned long data)
+{
+ struct bc_state *bcs = (struct bc_state *) data;
+ struct bas_cardstate *ucs;
+ int pending;
+ unsigned long flags;
+
+ IFNULLRET(bcs);
+ IFNULLRET(bcs->cs);
+ ucs = bcs->cs->hw.bas;
+ IFNULLRET(ucs);
+
+ check_pending(ucs);
+
+ spin_lock_irqsave(&ucs->lock, flags);
+ pending = ucs->pending;
+ ucs->pending = 0;
+ spin_unlock_irqrestore(&ucs->lock, flags);
+
+ switch (pending) {
+ case 0: /* no pending request */
+ dbg(DEBUG_USBREQ, "%s: no request pending", __func__);
+ break;
+
+ case HD_OPEN_ATCHANNEL:
+ err("timeout opening AT channel");
+ error_reset(bcs->cs);
+ break;
+
+ case HD_OPEN_B2CHANNEL:
+ case HD_OPEN_B1CHANNEL:
+ err("timeout opening channel %d", bcs->channel + 1);
+ error_hangup(bcs);
+ break;
+
+ case HD_CLOSE_ATCHANNEL:
+ err("timeout closing AT channel");
+ //wake_up_interruptible(cs->initwait);
+ //FIXME need own wait queue?
+ break;
+
+ case HD_CLOSE_B2CHANNEL:
+ case HD_CLOSE_B1CHANNEL:
+ err("timeout closing channel %d", bcs->channel + 1);
+ break;
+
+ default:
+ warn("request 0x%02x timed out, clearing", pending);
+ }
+}
+
+/* write_ctrl_callback
+ * USB completion handler for control pipe output
+ * called by the USB subsystem in interrupt context
+ * parameter:
+ * urb USB request block of completed request
+ * urb->context = hardware specific controller state structure
+ */
+static void write_ctrl_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct bas_cardstate *ucs;
+ unsigned long flags;
+
+ IFNULLRET(urb);
+ IFNULLRET(urb->context);
+ IFNULLRET(cardstate);
+
+ ucs = (struct bas_cardstate *) urb->context;
+ spin_lock_irqsave(&ucs->lock, flags);
+ if (urb->status && ucs->pending) {
+ err("control request 0x%02x failed: %s",
+ ucs->pending, get_usb_statmsg(urb->status));
+ del_timer(&ucs->timer_ctrl);
+ ucs->pending = 0;
+ }
+ /* individual handling of specific request types */
+ switch (ucs->pending) {
+ case HD_DEVICE_INIT_ACK: /* no reply expected */
+ ucs->pending = 0;
+ break;
+ }
+ spin_unlock_irqrestore(&ucs->lock, flags);
+}
+
+/* req_submit
+ * submit a control output request without message buffer to the Gigaset base
+ * and optionally start a timeout
+ * parameters:
+ * bcs B channel control structure
+ * req control request code (HD_*)
+ * val control request parameter value (set to 0 if unused)
+ * timeout timeout in seconds (0: no timeout)
+ * return value:
+ * 0 on success
+ * -EINVAL if a NULL pointer is encountered somewhere
+ * -EBUSY if another request is pending
+ * any URB submission error code
+ */
+static int req_submit(struct bc_state *bcs, int req, int val, int timeout)
+{
+ struct bas_cardstate *ucs;
+ int ret;
+ unsigned long flags;
+
+ IFNULLRETVAL(bcs, -EINVAL);
+ IFNULLRETVAL(bcs->cs, -EINVAL);
+ ucs = bcs->cs->hw.bas;
+ IFNULLRETVAL(ucs, -EINVAL);
+ IFNULLRETVAL(ucs->urb_ctrl, -EINVAL);
+
+ dbg(DEBUG_USBREQ, "-------> 0x%02x (%d)", req, val);
+
+ spin_lock_irqsave(&ucs->lock, flags);
+ if (ucs->pending) {
+ spin_unlock_irqrestore(&ucs->lock, flags);
+ err("submission of request 0x%02x failed: request 0x%02x still pending",
+ req, ucs->pending);
+ return -EBUSY;
+ }
+ if (ucs->urb_ctrl->status == -EINPROGRESS) {
+ spin_unlock_irqrestore(&ucs->lock, flags);
+ err("could not submit request 0x%02x: URB busy", req);
+ return -EBUSY;
+ }
+
+ ucs->dr_ctrl.bRequestType = OUT_VENDOR_REQ;
+ ucs->dr_ctrl.bRequest = req;
+ ucs->dr_ctrl.wValue = cpu_to_le16(val);
+ ucs->dr_ctrl.wIndex = 0;
+ ucs->dr_ctrl.wLength = 0;
+ usb_fill_control_urb(ucs->urb_ctrl, ucs->udev,
+ usb_sndctrlpipe(ucs->udev, 0),
+ (unsigned char*) &ucs->dr_ctrl, NULL, 0,
+ write_ctrl_callback, ucs);
+ if ((ret = usb_submit_urb(ucs->urb_ctrl, SLAB_ATOMIC)) != 0) {
+ err("could not submit request 0x%02x: %s",
+ req, get_usb_statmsg(ret));
+ spin_unlock_irqrestore(&ucs->lock, flags);
+ return ret;
+ }
+ ucs->pending = req;
+
+ if (timeout > 0) {
+ dbg(DEBUG_USBREQ, "setting timeout of %d/10 secs", timeout);
+ ucs->timer_ctrl.expires = jiffies + timeout * HZ / 10;
+ ucs->timer_ctrl.data = (unsigned long) bcs;
+ ucs->timer_ctrl.function = req_timeout;
+ add_timer(&ucs->timer_ctrl);
+ }
+
+ spin_unlock_irqrestore(&ucs->lock, flags);
+ return 0;
+}
+
+/* gigaset_init_bchannel
+ * called by common.c to connect a B channel
+ * initialize isochronous I/O and tell the Gigaset base to open the channel
+ * argument:
+ * B channel control structure
+ * return value:
+ * 0 on success, error code < 0 on error
+ */
+static int gigaset_init_bchannel(struct bc_state *bcs)
+{
+ int req, ret;
+
+ IFNULLRETVAL(bcs, -EINVAL);
+
+ if ((ret = starturbs(bcs)) < 0) {
+ err("could not start isochronous I/O for channel %d",
+ bcs->channel + 1);
+ error_hangup(bcs);
+ return ret;
+ }
+
+ req = bcs->channel ? HD_OPEN_B2CHANNEL : HD_OPEN_B1CHANNEL;
+ if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0) {
+ err("could not open channel %d: %s",
+ bcs->channel + 1, get_usb_statmsg(ret));
+ stopurbs(bcs->hw.bas);
+ error_hangup(bcs);
+ }
+ return ret;
+}
+
+/* gigaset_close_bchannel
+ * called by common.c to disconnect a B channel
+ * tell the Gigaset base to close the channel
+ * stopping isochronous I/O and LL notification will be done when the
+ * acknowledgement for the close arrives
+ * argument:
+ * B channel control structure
+ * return value:
+ * 0 on success, error code < 0 on error
+ */
+static int gigaset_close_bchannel(struct bc_state *bcs)
+{
+ int req, ret;
+
+ IFNULLRETVAL(bcs, -EINVAL);
+
+ if (!(atomic_read(&bcs->cs->hw.bas->basstate) &
+ (bcs->channel ? BS_B2OPEN : BS_B1OPEN))) {
+ /* channel not running: just signal common.c */
+ gigaset_bchannel_down(bcs);
+ return 0;
+ }
+
+ req = bcs->channel ? HD_CLOSE_B2CHANNEL : HD_CLOSE_B1CHANNEL;
+ if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0)
+ err("could not submit HD_CLOSE_BxCHANNEL request: %s",
+ get_usb_statmsg(ret));
+ return ret;
+}
+
+/* Device Operations */
+/* ================= */
+
+/* complete_cb
+ * unqueue first command buffer from queue, waking any sleepers
+ * must be called with cs->cmdlock held
+ * parameter:
+ * cs controller state structure
+ */
+static void complete_cb(struct cardstate *cs)
+{
+ struct cmdbuf_t *cb;
+
+ IFNULLRET(cs);
+ cb = cs->cmdbuf;
+ IFNULLRET(cb);
+
+ /* unqueue completed buffer */
+ cs->cmdbytes -= cs->curlen;
+ dbg(DEBUG_TRANSCMD | DEBUG_LOCKCMD,
+ "write_command: sent %u bytes, %u left",
+ cs->curlen, cs->cmdbytes);
+ if ((cs->cmdbuf = cb->next) != NULL) {
+ cs->cmdbuf->prev = NULL;
+ cs->curlen = cs->cmdbuf->len;
+ } else {
+ cs->lastcmdbuf = NULL;
+ cs->curlen = 0;
+ }
+
+ if (cb->wake_tasklet)
+ tasklet_schedule(cb->wake_tasklet);
+
+ kfree(cb);
+}
+
+static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len);
+
+/* write_command_callback
+ * USB completion handler for AT command transmission
+ * called by the USB subsystem in interrupt context
+ * parameter:
+ * urb USB request block of completed request
+ * urb->context = controller state structure
+ */
+static void write_command_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct cardstate *cs;
+ unsigned long flags;
+ struct bas_cardstate *ucs;
+
+ IFNULLRET(urb);
+ cs = (struct cardstate *) urb->context;
+ IFNULLRET(cs);
+ ucs = cs->hw.bas;
+ IFNULLRET(ucs);
+
+ /* check status */
+ switch (urb->status) {
+ case 0: /* normal completion */
+ break;
+ case -ENOENT: /* canceled */
+ case -ECONNRESET: /* canceled (async) */
+ case -EINPROGRESS: /* pending */
+ /* ignore silently */
+ dbg(DEBUG_USBREQ,
+ "%s: %s", __func__, get_usb_statmsg(urb->status));
+ return;
+ default: /* any failure */
+ if (++ucs->retry_cmd_out > BAS_RETRY) {
+ warn("command write: %s, giving up after %d retries",
+ get_usb_statmsg(urb->status), ucs->retry_cmd_out);
+ break;
+ }
+ if (cs->cmdbuf == NULL) {
+ warn("command write: %s, cannot retry - cmdbuf gone",
+ get_usb_statmsg(urb->status));
+ break;
+ }
+ notice("command write: %s, retry %d",
+ get_usb_statmsg(urb->status), ucs->retry_cmd_out);
+ if (atwrite_submit(cs, cs->cmdbuf->buf, cs->cmdbuf->len) >= 0)
+ /* resubmitted - bypass regular exit block */
+ return;
+ /* command send failed, assume base still waiting */
+ update_basstate(ucs, BS_ATREADY, 0);
+ }
+
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ if (cs->cmdbuf != NULL)
+ complete_cb(cs);
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+}
+
+/* atrdy_timeout
+ * timeout routine for AT command transmission
+ * argument:
+ * controller state structure
+ */
+static void atrdy_timeout(unsigned long data)
+{
+ struct cardstate *cs = (struct cardstate *) data;
+ struct bas_cardstate *ucs;
+
+ IFNULLRET(cs);
+ ucs = cs->hw.bas;
+ IFNULLRET(ucs);
+
+ warn("timeout waiting for HD_READY_SEND_ATDATA");
+
+ /* fake the missing signal - what else can I do? */
+ update_basstate(ucs, BS_ATREADY, BS_ATTIMER);
+ start_cbsend(cs);
+}
+
+/* atwrite_submit
+ * submit an HD_WRITE_ATMESSAGE command URB
+ * parameters:
+ * cs controller state structure
+ * buf buffer containing command to send
+ * len length of command to send
+ * return value:
+ * 0 on success
+ * -EFAULT if a NULL pointer is encountered somewhere
+ * -EBUSY if another request is pending
+ * any URB submission error code
+ */
+static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len)
+{
+ struct bas_cardstate *ucs;
+ int ret;
+
+ IFNULLRETVAL(cs, -EFAULT);
+ ucs = cs->hw.bas;
+ IFNULLRETVAL(ucs, -EFAULT);
+ IFNULLRETVAL(ucs->urb_cmd_out, -EFAULT);
+
+ dbg(DEBUG_USBREQ, "-------> HD_WRITE_ATMESSAGE (%d)", len);
+
+ if (ucs->urb_cmd_out->status == -EINPROGRESS) {
+ err("could not submit HD_WRITE_ATMESSAGE: URB busy");
+ return -EBUSY;
+ }
+
+ ucs->dr_cmd_out.bRequestType = OUT_VENDOR_REQ;
+ ucs->dr_cmd_out.bRequest = HD_WRITE_ATMESSAGE;
+ ucs->dr_cmd_out.wValue = 0;
+ ucs->dr_cmd_out.wIndex = 0;
+ ucs->dr_cmd_out.wLength = cpu_to_le16(len);
+ usb_fill_control_urb(ucs->urb_cmd_out, ucs->udev,
+ usb_sndctrlpipe(ucs->udev, 0),
+ (unsigned char*) &ucs->dr_cmd_out, buf, len,
+ write_command_callback, cs);
+
+ if ((ret = usb_submit_urb(ucs->urb_cmd_out, SLAB_ATOMIC)) != 0) {
+ err("could not submit HD_WRITE_ATMESSAGE: %s",
+ get_usb_statmsg(ret));
+ return ret;
+ }
+
+ /* submitted successfully */
+ update_basstate(ucs, 0, BS_ATREADY);
+
+ /* start timeout if necessary */
+ if (!(atomic_read(&ucs->basstate) & BS_ATTIMER)) {
+ dbg(DEBUG_OUTPUT,
+ "setting ATREADY timeout of %d/10 secs", ATRDY_TIMEOUT);
+ ucs->timer_atrdy.expires = jiffies + ATRDY_TIMEOUT * HZ / 10;
+ ucs->timer_atrdy.data = (unsigned long) cs;
+ ucs->timer_atrdy.function = atrdy_timeout;
+ add_timer(&ucs->timer_atrdy);
+ update_basstate(ucs, BS_ATTIMER, 0);
+ }
+ return 0;
+}
+
+/* start_cbsend
+ * start transmission of AT command queue if necessary
+ * parameter:
+ * cs controller state structure
+ * return value:
+ * 0 on success
+ * error code < 0 on error
+ */
+static int start_cbsend(struct cardstate *cs)
+{
+ struct cmdbuf_t *cb;
+ struct bas_cardstate *ucs;
+ unsigned long flags;
+ int rc;
+ int retval = 0;
+
+ IFNULLRETVAL(cs, -EFAULT);
+ ucs = cs->hw.bas;
+ IFNULLRETVAL(ucs, -EFAULT);
+
+ /* check if AT channel is open */
+ if (!(atomic_read(&ucs->basstate) & BS_ATOPEN)) {
+ dbg(DEBUG_TRANSCMD | DEBUG_LOCKCMD, "AT channel not open");
+ rc = req_submit(cs->bcs, HD_OPEN_ATCHANNEL, 0, BAS_TIMEOUT);
+ if (rc < 0) {
+ err("could not open AT channel");
+ /* flush command queue */
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ while (cs->cmdbuf != NULL)
+ complete_cb(cs);
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+ }
+ return rc;
+ }
+
+ /* try to send first command in queue */
+ spin_lock_irqsave(&cs->cmdlock, flags);
+
+ while ((cb = cs->cmdbuf) != NULL &&
+ atomic_read(&ucs->basstate) & BS_ATREADY) {
+ ucs->retry_cmd_out = 0;
+ rc = atwrite_submit(cs, cb->buf, cb->len);
+ if (unlikely(rc)) {
+ retval = rc;
+ complete_cb(cs);
+ }
+ }
+
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+ return retval;
+}
+
+/* gigaset_write_cmd
+ * This function is called by the device independent part of the driver
+ * to transmit an AT command string to the Gigaset device.
+ * It encapsulates the device specific method for transmission over the
+ * direct USB connection to the base.
+ * The command string is added to the queue of commands to send, and
+ * USB transmission is started if necessary.
+ * parameters:
+ * cs controller state structure
+ * buf command string to send
+ * len number of bytes to send (max. IF_WRITEBUF)
+ * wake_tasklet tasklet to run when transmission is completed (NULL if none)
+ * return value:
+ * number of bytes queued on success
+ * error code < 0 on error
+ */
+static int gigaset_write_cmd(struct cardstate *cs,
+ const unsigned char *buf, int len,
+ struct tasklet_struct *wake_tasklet)
+{
+ struct cmdbuf_t *cb;
+ unsigned long flags;
+ int status;
+
+ gigaset_dbg_buffer(atomic_read(&cs->mstate) != MS_LOCKED ?
+ DEBUG_TRANSCMD : DEBUG_LOCKCMD,
+ "CMD Transmit", len, buf, 0);
+
+ if (!atomic_read(&cs->connected)) {
+ err("%s: not connected", __func__);
+ return -ENODEV;
+ }
+
+ if (len <= 0)
+ return 0; /* nothing to do */
+
+ if (len > IF_WRITEBUF)
+ len = IF_WRITEBUF;
+ if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
+ err("%s: out of memory", __func__);
+ return -ENOMEM;
+ }
+
+ memcpy(cb->buf, buf, len);
+ cb->len = len;
+ cb->offset = 0;
+ cb->next = NULL;
+ cb->wake_tasklet = wake_tasklet;
+
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ cb->prev = cs->lastcmdbuf;
+ if (cs->lastcmdbuf)
+ cs->lastcmdbuf->next = cb;
+ else {
+ cs->cmdbuf = cb;
+ cs->curlen = len;
+ }
+ cs->cmdbytes += len;
+ cs->lastcmdbuf = cb;
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+
+ status = start_cbsend(cs);
+
+ return status < 0 ? status : len;
+}
+
+/* gigaset_write_room
+ * tty_driver.write_room interface routine
+ * return number of characters the driver will accept to be written via gigaset_write_cmd
+ * parameter:
+ * controller state structure
+ * return value:
+ * number of characters
+ */
+static int gigaset_write_room(struct cardstate *cs)
+{
+ return IF_WRITEBUF;
+}
+
+/* gigaset_chars_in_buffer
+ * tty_driver.chars_in_buffer interface routine
+ * return number of characters waiting to be sent
+ * parameter:
+ * controller state structure
+ * return value:
+ * number of characters
+ */
+static int gigaset_chars_in_buffer(struct cardstate *cs)
+{
+ unsigned long flags;
+ unsigned bytes;
+
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ bytes = cs->cmdbytes;
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+
+ return bytes;
+}
+
+/* gigaset_brkchars
+ * implementation of ioctl(GIGASET_BRKCHARS)
+ * parameter:
+ * controller state structure
+ * return value:
+ * -EINVAL (unimplemented function)
+ */
+static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
+{
+ return -EINVAL;
+}
+
+
+/* Device Initialization/Shutdown */
+/* ============================== */
+
+/* Free hardware dependent part of the B channel structure
+ * parameter:
+ * bcs B channel structure
+ * return value:
+ * !=0 on success
+ */
+static int gigaset_freebcshw(struct bc_state *bcs)
+{
+ if (!bcs->hw.bas)
+ return 0;
+
+ if (bcs->hw.bas->isooutbuf)
+ kfree(bcs->hw.bas->isooutbuf);
+ kfree(bcs->hw.bas);
+ bcs->hw.bas = NULL;
+ return 1;
+}
+
+/* Initialize hardware dependent part of the B channel structure
+ * parameter:
+ * bcs B channel structure
+ * return value:
+ * !=0 on success
+ */
+static int gigaset_initbcshw(struct bc_state *bcs)
+{
+ int i;
+ struct bas_bc_state *ubc;
+
+ bcs->hw.bas = ubc = kmalloc(sizeof(struct bas_bc_state), GFP_KERNEL);
+ if (!ubc) {
+ err("could not allocate bas_bc_state");
+ return 0;
+ }
+
+ atomic_set(&ubc->running, 0);
+ atomic_set(&ubc->corrbytes, 0);
+ spin_lock_init(&ubc->isooutlock);
+ for (i = 0; i < BAS_OUTURBS; ++i) {
+ ubc->isoouturbs[i].urb = NULL;
+ ubc->isoouturbs[i].bcs = bcs;
+ }
+ ubc->isooutdone = ubc->isooutfree = ubc->isooutovfl = NULL;
+ ubc->numsub = 0;
+ if (!(ubc->isooutbuf = kmalloc(sizeof(struct isowbuf_t), GFP_KERNEL))) {
+ err("could not allocate isochronous output buffer");
+ kfree(ubc);
+ bcs->hw.bas = NULL;
+ return 0;
+ }
+ tasklet_init(&ubc->sent_tasklet,
+ &write_iso_tasklet, (unsigned long) bcs);
+
+ spin_lock_init(&ubc->isoinlock);
+ for (i = 0; i < BAS_INURBS; ++i)
+ ubc->isoinurbs[i] = NULL;
+ ubc->isoindone = NULL;
+ ubc->loststatus = -EINPROGRESS;
+ ubc->isoinlost = 0;
+ ubc->seqlen = 0;
+ ubc->inbyte = 0;
+ ubc->inbits = 0;
+ ubc->goodbytes = 0;
+ ubc->alignerrs = 0;
+ ubc->fcserrs = 0;
+ ubc->frameerrs = 0;
+ ubc->giants = 0;
+ ubc->runts = 0;
+ ubc->aborts = 0;
+ ubc->shared0s = 0;
+ ubc->stolen0s = 0;
+ tasklet_init(&ubc->rcvd_tasklet,
+ &read_iso_tasklet, (unsigned long) bcs);
+ return 1;
+}
+
+static void gigaset_reinitbcshw(struct bc_state *bcs)
+{
+ struct bas_bc_state *ubc = bcs->hw.bas;
+
+ atomic_set(&bcs->hw.bas->running, 0);
+ atomic_set(&bcs->hw.bas->corrbytes, 0);
+ bcs->hw.bas->numsub = 0;
+ spin_lock_init(&ubc->isooutlock);
+ spin_lock_init(&ubc->isoinlock);
+ ubc->loststatus = -EINPROGRESS;
+}
+
+static void gigaset_freecshw(struct cardstate *cs)
+{
+ struct bas_cardstate *ucs = cs->hw.bas;
+
+ del_timer(&ucs->timer_ctrl);
+ del_timer(&ucs->timer_atrdy);
+ del_timer(&ucs->timer_cmd_in);
+
+ kfree(cs->hw.bas);
+}
+
+static int gigaset_initcshw(struct cardstate *cs)
+{
+ struct bas_cardstate *ucs;
+
+ cs->hw.bas = ucs = kmalloc(sizeof *ucs, GFP_KERNEL);
+ if (!ucs)
+ return 0;
+
+ ucs->urb_cmd_in = NULL;
+ ucs->urb_cmd_out = NULL;
+ ucs->rcvbuf = NULL;
+ ucs->rcvbuf_size = 0;
+
+ spin_lock_init(&ucs->lock);
+ ucs->pending = 0;
+
+ atomic_set(&ucs->basstate, 0);
+ init_timer(&ucs->timer_ctrl);
+ init_timer(&ucs->timer_atrdy);
+ init_timer(&ucs->timer_cmd_in);
+
+ return 1;
+}
+
+/* freeurbs
+ * unlink and deallocate all URBs unconditionally
+ * caller must make sure that no commands are still in progress
+ * parameter:
+ * cs controller state structure
+ */
+static void freeurbs(struct cardstate *cs)
+{
+ struct bas_cardstate *ucs;
+ struct bas_bc_state *ubc;
+ int i, j;
+
+ IFNULLRET(cs);
+ ucs = cs->hw.bas;
+ IFNULLRET(ucs);
+
+ for (j = 0; j < 2; ++j) {
+ ubc = cs->bcs[j].hw.bas;
+ IFNULLCONT(ubc);
+ for (i = 0; i < BAS_OUTURBS; ++i)
+ if (ubc->isoouturbs[i].urb) {
+ usb_kill_urb(ubc->isoouturbs[i].urb);
+ dbg(DEBUG_INIT,
+ "%s: isoc output URB %d/%d unlinked",
+ __func__, j, i);
+ usb_free_urb(ubc->isoouturbs[i].urb);
+ ubc->isoouturbs[i].urb = NULL;
+ }
+ for (i = 0; i < BAS_INURBS; ++i)
+ if (ubc->isoinurbs[i]) {
+ usb_kill_urb(ubc->isoinurbs[i]);
+ dbg(DEBUG_INIT,
+ "%s: isoc input URB %d/%d unlinked",
+ __func__, j, i);
+ usb_free_urb(ubc->isoinurbs[i]);
+ ubc->isoinurbs[i] = NULL;
+ }
+ }
+ if (ucs->urb_int_in) {
+ usb_kill_urb(ucs->urb_int_in);
+ dbg(DEBUG_INIT, "%s: interrupt input URB unlinked", __func__);
+ usb_free_urb(ucs->urb_int_in);
+ ucs->urb_int_in = NULL;
+ }
+ if (ucs->urb_cmd_out) {
+ usb_kill_urb(ucs->urb_cmd_out);
+ dbg(DEBUG_INIT, "%s: command output URB unlinked", __func__);
+ usb_free_urb(ucs->urb_cmd_out);
+ ucs->urb_cmd_out = NULL;
+ }
+ if (ucs->urb_cmd_in) {
+ usb_kill_urb(ucs->urb_cmd_in);
+ dbg(DEBUG_INIT, "%s: command input URB unlinked", __func__);
+ usb_free_urb(ucs->urb_cmd_in);
+ ucs->urb_cmd_in = NULL;
+ }
+ if (ucs->urb_ctrl) {
+ usb_kill_urb(ucs->urb_ctrl);
+ dbg(DEBUG_INIT, "%s: control output URB unlinked", __func__);
+ usb_free_urb(ucs->urb_ctrl);
+ ucs->urb_ctrl = NULL;
+ }
+}
+
+/* gigaset_probe
+ * This function is called when a new USB device is connected.
+ * It checks whether the new device is handled by this driver.
+ */
+static int gigaset_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_host_interface *hostif;
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct cardstate *cs = NULL;
+ struct bas_cardstate *ucs = NULL;
+ struct bas_bc_state *ubc;
+ struct usb_endpoint_descriptor *endpoint;
+ int i, j;
+ int ret;
+
+ IFNULLRETVAL(udev, -ENODEV);
+
+ dbg(DEBUG_ANY,
+ "%s: Check if device matches .. (Vendor: 0x%x, Product: 0x%x)",
+ __func__, le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ /* See if the device offered us matches what we can accept */
+ if ((le16_to_cpu(udev->descriptor.idVendor) != USB_GIGA_VENDOR_ID) ||
+ (le16_to_cpu(udev->descriptor.idProduct) != USB_GIGA_PRODUCT_ID &&
+ le16_to_cpu(udev->descriptor.idProduct) != USB_4175_PRODUCT_ID &&
+ le16_to_cpu(udev->descriptor.idProduct) != USB_SX303_PRODUCT_ID &&
+ le16_to_cpu(udev->descriptor.idProduct) != USB_SX353_PRODUCT_ID)) {
+ dbg(DEBUG_ANY, "%s: unmatched ID - exiting", __func__);
+ return -ENODEV;
+ }
+
+ /* set required alternate setting */
+ hostif = interface->cur_altsetting;
+ if (hostif->desc.bAlternateSetting != 3) {
+ dbg(DEBUG_ANY,
+ "%s: wrong alternate setting %d - trying to switch",
+ __func__, hostif->desc.bAlternateSetting);
+ if (usb_set_interface(udev, hostif->desc.bInterfaceNumber, 3) < 0) {
+ warn("usb_set_interface failed, device %d interface %d altsetting %d",
+ udev->devnum, hostif->desc.bInterfaceNumber,
+ hostif->desc.bAlternateSetting);
+ return -ENODEV;
+ }
+ hostif = interface->cur_altsetting;
+ }
+
+ /* Reject application specific interfaces
+ */
+ if (hostif->desc.bInterfaceClass != 255) {
+ warn("%s: bInterfaceClass == %d",
+ __func__, hostif->desc.bInterfaceClass);
+ return -ENODEV;
+ }
+
+ info("%s: Device matched (Vendor: 0x%x, Product: 0x%x)",
+ __func__, le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ cs = gigaset_getunassignedcs(driver);
+ if (!cs) {
+ err("%s: no free cardstate", __func__);
+ return -ENODEV;
+ }
+ ucs = cs->hw.bas;
+ ucs->udev = udev;
+ ucs->interface = interface;
+
+ /* allocate URBs:
+ * - one for the interrupt pipe
+ * - three for the different uses of the default control pipe
+ * - three for each isochronous pipe
+ */
+ ucs->urb_int_in = usb_alloc_urb(0, SLAB_KERNEL);
+ if (!ucs->urb_int_in) {
+ err("No free urbs available");
+ goto error;
+ }
+ ucs->urb_cmd_in = usb_alloc_urb(0, SLAB_KERNEL);
+ if (!ucs->urb_cmd_in) {
+ err("No free urbs available");
+ goto error;
+ }
+ ucs->urb_cmd_out = usb_alloc_urb(0, SLAB_KERNEL);
+ if (!ucs->urb_cmd_out) {
+ err("No free urbs available");
+ goto error;
+ }
+ ucs->urb_ctrl = usb_alloc_urb(0, SLAB_KERNEL);
+ if (!ucs->urb_ctrl) {
+ err("No free urbs available");
+ goto error;
+ }
+
+ for (j = 0; j < 2; ++j) {
+ ubc = cs->bcs[j].hw.bas;
+ for (i = 0; i < BAS_OUTURBS; ++i) {
+ ubc->isoouturbs[i].urb =
+ usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL);
+ if (!ubc->isoouturbs[i].urb) {
+ err("No free urbs available");
+ goto error;
+ }
+ }
+ for (i = 0; i < BAS_INURBS; ++i) {
+ ubc->isoinurbs[i] =
+ usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL);
+ if (!ubc->isoinurbs[i]) {
+ err("No free urbs available");
+ goto error;
+ }
+ }
+ }
+
+ ucs->rcvbuf = NULL;
+ ucs->rcvbuf_size = 0;
+
+ /* Fill the interrupt urb and send it to the core */
+ endpoint = &hostif->endpoint[0].desc;
+ usb_fill_int_urb(ucs->urb_int_in, udev,
+ usb_rcvintpipe(udev,
+ (endpoint->bEndpointAddress) & 0x0f),
+ ucs->int_in_buf, 3, read_int_callback, cs,
+ endpoint->bInterval);
+ ret = usb_submit_urb(ucs->urb_int_in, SLAB_KERNEL);
+ if (ret) {
+ err("could not submit interrupt URB: %s", get_usb_statmsg(ret));
+ goto error;
+ }
+
+ /* tell the device that the driver is ready */
+ if ((ret = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0)
+ goto error;
+
+ /* tell common part that the device is ready */
+ if (startmode == SM_LOCKED)
+ atomic_set(&cs->mstate, MS_LOCKED);
+ if (!gigaset_start(cs))
+ goto error;
+
+ /* save address of controller structure */
+ usb_set_intfdata(interface, cs);
+
+ /* set up device sysfs */
+ gigaset_init_dev_sysfs(interface);
+ return 0;
+
+error:
+ freeurbs(cs);
+ gigaset_unassign(cs);
+ return -ENODEV;
+}
+
+/* gigaset_disconnect
+ * This function is called when the Gigaset base is unplugged.
+ */
+static void gigaset_disconnect(struct usb_interface *interface)
+{
+ struct cardstate *cs;
+ struct bas_cardstate *ucs;
+
+ /* clear device sysfs */
+ gigaset_free_dev_sysfs(interface);
+
+ cs = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ IFNULLRET(cs);
+ ucs = cs->hw.bas;
+ IFNULLRET(ucs);
+
+ info("disconnecting GigaSet base");
+ gigaset_stop(cs);
+ freeurbs(cs);
+ kfree(ucs->rcvbuf);
+ ucs->rcvbuf = NULL;
+ ucs->rcvbuf_size = 0;
+ atomic_set(&ucs->basstate, 0);
+ gigaset_unassign(cs);
+}
+
+static struct gigaset_ops gigops = {
+ gigaset_write_cmd,
+ gigaset_write_room,
+ gigaset_chars_in_buffer,
+ gigaset_brkchars,
+ gigaset_init_bchannel,
+ gigaset_close_bchannel,
+ gigaset_initbcshw,
+ gigaset_freebcshw,
+ gigaset_reinitbcshw,
+ gigaset_initcshw,
+ gigaset_freecshw,
+ gigaset_set_modem_ctrl,
+ gigaset_baud_rate,
+ gigaset_set_line_ctrl,
+ gigaset_isoc_send_skb,
+ gigaset_isoc_input,
+};
+
+/* bas_gigaset_init
+ * This function is called after the kernel module is loaded.
+ */
+static int __init bas_gigaset_init(void)
+{
+ int result;
+
+ /* allocate memory for our driver state and intialize it */
+ if ((driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
+ GIGASET_MODULENAME, GIGASET_DEVNAME,
+ GIGASET_DEVFSNAME, &gigops,
+ THIS_MODULE)) == NULL)
+ goto error;
+
+ /* allocate memory for our device state and intialize it */
+ cardstate = gigaset_initcs(driver, 2, 0, 0, cidmode, GIGASET_MODULENAME);
+ if (!cardstate)
+ goto error;
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&gigaset_usb_driver);
+ if (result < 0) {
+ err("usb_register failed (error %d)", -result);
+ goto error;
+ }
+
+ info(DRIVER_AUTHOR);
+ info(DRIVER_DESC);
+ return 0;
+
+error: if (cardstate)
+ gigaset_freecs(cardstate);
+ cardstate = NULL;
+ if (driver)
+ gigaset_freedriver(driver);
+ driver = NULL;
+ return -1;
+}
+
+/* bas_gigaset_exit
+ * This function is called before the kernel module is unloaded.
+ */
+static void __exit bas_gigaset_exit(void)
+{
+ gigaset_blockdriver(driver); /* => probe will fail
+ * => no gigaset_start any more
+ */
+
+ gigaset_shutdown(cardstate);
+ /* from now on, no isdn callback should be possible */
+
+ if (atomic_read(&cardstate->hw.bas->basstate) & BS_ATOPEN) {
+ dbg(DEBUG_ANY, "closing AT channel");
+ if (req_submit(cardstate->bcs,
+ HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT) >= 0) {
+ /* successfully submitted - wait for completion */
+ //wait_event_interruptible(cs->initwait, !cs->hw.bas->pending);
+ //FIXME need own wait queue? wakeup?
+ }
+ }
+
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&gigaset_usb_driver);
+ /* this will call the disconnect-callback */
+ /* from now on, no disconnect/probe callback should be running */
+
+ gigaset_freecs(cardstate);
+ cardstate = NULL;
+ gigaset_freedriver(driver);
+ driver = NULL;
+}
+
+
+module_init(bas_gigaset_init);
+module_exit(bas_gigaset_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud