Staging: comedi: dt9812: remove dt9812.h

An extra .h file is not needed for the dt9812 driver so
merge it into the .c file.

Cc: Anders Blomdell <anders.blomdell@control.lth.se>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2 files changed, 206 insertions, 211 deletions

diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index e93c308..3ded199 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -53,7 +53,212 @@ for my needs.
 #include <linux/usb.h>
 
 #include "../comedidev.h"
-#include "dt9812.h"
+
+#define DT9812_DIAGS_BOARD_INFO_ADDR	0xFBFF
+#define DT9812_MAX_WRITE_CMD_PIPE_SIZE	32
+#define DT9812_MAX_READ_CMD_PIPE_SIZE	32
+
+/*
+ * See Silican Laboratories C8051F020/1/2/3 manual
+ */
+#define F020_SFR_P4			0x84
+#define F020_SFR_P1			0x90
+#define F020_SFR_P2			0xa0
+#define F020_SFR_P3			0xb0
+#define F020_SFR_AMX0CF			0xba
+#define F020_SFR_AMX0SL			0xbb
+#define F020_SFR_ADC0CF			0xbc
+#define F020_SFR_ADC0L			0xbe
+#define F020_SFR_ADC0H			0xbf
+#define F020_SFR_DAC0L			0xd2
+#define F020_SFR_DAC0H			0xd3
+#define F020_SFR_DAC0CN			0xd4
+#define F020_SFR_DAC1L			0xd5
+#define F020_SFR_DAC1H			0xd6
+#define F020_SFR_DAC1CN			0xd7
+#define F020_SFR_ADC0CN			0xe8
+
+#define F020_MASK_ADC0CF_AMP0GN0	0x01
+#define F020_MASK_ADC0CF_AMP0GN1	0x02
+#define F020_MASK_ADC0CF_AMP0GN2	0x04
+
+#define F020_MASK_ADC0CN_AD0EN		0x80
+#define F020_MASK_ADC0CN_AD0INT		0x20
+#define F020_MASK_ADC0CN_AD0BUSY	0x10
+
+#define F020_MASK_DACxCN_DACxEN		0x80
+
+typedef enum {
+				/* A/D  D/A  DI  DO  CT */
+	DT9812_DEVID_DT9812_10,	/*  8    2   8   8   1  +/- 10V */
+	DT9812_DEVID_DT9812_2PT5,/* 8    2   8   8   1  0-2.44V */
+#if 0
+	DT9812_DEVID_DT9813,	/*  16   2   4   4   1  +/- 10V */
+	DT9812_DEVID_DT9814	/*  24   2   0   0   1  +/- 10V */
+#endif
+} dt9812_devid_t;
+
+typedef enum {
+	DT9812_GAIN_0PT25 = 1,
+	DT9812_GAIN_0PT5 = 2,
+	DT9812_GAIN_1 = 4,
+	DT9812_GAIN_2 = 8,
+	DT9812_GAIN_4 = 16,
+	DT9812_GAIN_8 = 32,
+	DT9812_GAIN_16 = 64,
+} dt9812_gain_t;
+
+typedef enum {
+	DT9812_LEAST_USB_FIRMWARE_CMD_CODE = 0,
+	/* Write Flash memory */
+	DT9812_W_FLASH_DATA = 0,
+	/* Read Flash memory misc config info */
+	DT9812_R_FLASH_DATA = 1,
+
+	/*
+	 * Register read/write commands for processor
+	 */
+
+	/* Read a single byte of USB memory */
+	DT9812_R_SINGLE_BYTE_REG = 2,
+	/* Write a single byte of USB memory */
+	DT9812_W_SINGLE_BYTE_REG = 3,
+	/* Multiple Reads of USB memory */
+	DT9812_R_MULTI_BYTE_REG = 4,
+	/* Multiple Writes of USB memory */
+	DT9812_W_MULTI_BYTE_REG = 5,
+	/* Read, (AND) with mask, OR value, then write (single) */
+	DT9812_RMW_SINGLE_BYTE_REG = 6,
+	/* Read, (AND) with mask, OR value, then write (multiple) */
+	DT9812_RMW_MULTI_BYTE_REG = 7,
+
+	/*
+	 * Register read/write commands for SMBus
+	 */
+
+	/* Read a single byte of SMBus */
+	DT9812_R_SINGLE_BYTE_SMBUS = 8,
+	/* Write a single byte of SMBus */
+	DT9812_W_SINGLE_BYTE_SMBUS = 9,
+	/* Multiple Reads of SMBus */
+	DT9812_R_MULTI_BYTE_SMBUS = 10,
+	/* Multiple Writes of SMBus */
+	DT9812_W_MULTI_BYTE_SMBUS = 11,
+
+	/*
+	 * Register read/write commands for a device
+	 */
+
+	/* Read a single byte of a device */
+	DT9812_R_SINGLE_BYTE_DEV = 12,
+	/* Write a single byte of a device */
+	DT9812_W_SINGLE_BYTE_DEV = 13,
+	/* Multiple Reads of a device */
+	DT9812_R_MULTI_BYTE_DEV = 14,
+	/* Multiple Writes of a device */
+	DT9812_W_MULTI_BYTE_DEV = 15,
+
+	/* Not sure if we'll need this */
+	DT9812_W_DAC_THRESHOLD = 16,
+
+	/* Set interrupt on change mask */
+	DT9812_W_INT_ON_CHANGE_MASK = 17,
+
+	/* Write (or Clear) the CGL for the ADC */
+	DT9812_W_CGL = 18,
+	/* Multiple Reads of USB memory */
+	DT9812_R_MULTI_BYTE_USBMEM = 19,
+	/* Multiple Writes to USB memory */
+	DT9812_W_MULTI_BYTE_USBMEM = 20,
+
+	/* Issue a start command to a given subsystem */
+	DT9812_START_SUBSYSTEM = 21,
+	/* Issue a stop command to a given subsystem */
+	DT9812_STOP_SUBSYSTEM = 22,
+
+	/* calibrate the board using CAL_POT_CMD */
+	DT9812_CALIBRATE_POT = 23,
+	/* set the DAC FIFO size */
+	DT9812_W_DAC_FIFO_SIZE = 24,
+	/* Write or Clear the CGL for the DAC */
+	DT9812_W_CGL_DAC = 25,
+	/* Read a single value from a subsystem */
+	DT9812_R_SINGLE_VALUE_CMD = 26,
+	/* Write a single value to a subsystem */
+	DT9812_W_SINGLE_VALUE_CMD = 27,
+	/* Valid DT9812_USB_FIRMWARE_CMD_CODE's will be less than this number */
+	DT9812_MAX_USB_FIRMWARE_CMD_CODE,
+} dt9812_usb_firmware_cmd_t;
+
+typedef struct {
+	u16 numbytes;
+	u16 address;
+} dt9812_flash_data_t;
+
+#define DT9812_MAX_NUM_MULTI_BYTE_RDS  \
+    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8))
+
+typedef struct {
+	u8 count;
+	u8 address[DT9812_MAX_NUM_MULTI_BYTE_RDS];
+} dt9812_read_multi_t;
+
+typedef struct {
+	u8 address;
+	u8 value;
+} dt9812_write_byte_t;
+
+#define DT9812_MAX_NUM_MULTI_BYTE_WRTS  \
+    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_write_byte_t))
+
+typedef struct {
+	u8 count;
+	dt9812_write_byte_t write[DT9812_MAX_NUM_MULTI_BYTE_WRTS];
+} dt9812_write_multi_t;
+
+typedef struct {
+	u8 address;
+	u8 and_mask;
+	u8 or_value;
+} dt9812_rmw_byte_t;
+
+#define DT9812_MAX_NUM_MULTI_BYTE_RMWS  \
+    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_rmw_byte_t))
+
+typedef struct {
+	u8 count;
+	dt9812_rmw_byte_t rmw[DT9812_MAX_NUM_MULTI_BYTE_RMWS];
+} dt9812_rmw_multi_t;
+
+typedef struct dt9812_usb_cmd {
+
+	u32 cmd;
+	union {
+		dt9812_flash_data_t flash_data_info;
+		dt9812_read_multi_t read_multi_info;
+		dt9812_write_multi_t write_multi_info;
+		dt9812_rmw_multi_t rmw_multi_info;
+	} u;
+#if 0
+	WRITE_BYTE_INFO WriteByteInfo;
+	READ_BYTE_INFO ReadByteInfo;
+	WRITE_MULTI_INFO WriteMultiInfo;
+	READ_MULTI_INFO ReadMultiInfo;
+	RMW_BYTE_INFO RMWByteInfo;
+	RMW_MULTI_INFO RMWMultiInfo;
+	DAC_THRESHOLD_INFO DacThresholdInfo;
+	INT_ON_CHANGE_MASK_INFO IntOnChangeMaskInfo;
+	CGL_INFO CglInfo;
+	SUBSYSTEM_INFO SubsystemInfo;
+	CAL_POT_CMD CalPotCmd;
+	WRITE_DEV_BYTE_INFO WriteDevByteInfo;
+	READ_DEV_BYTE_INFO ReadDevByteInfo;
+	WRITE_DEV_MULTI_INFO WriteDevMultiInfo;
+	READ_DEV_MULTI_INFO ReadDevMultiInfo;
+	READ_SINGLE_VALUE_INFO ReadSingleValueInfo;
+	WRITE_SINGLE_VALUE_INFO WriteSingleValueInfo;
+#endif
+} dt9812_usb_cmd_t;
 
 #define DT9812_NUM_SLOTS	16
 
diff --git a/drivers/staging/comedi/drivers/dt9812.h b/drivers/staging/comedi/drivers/dt9812.h
deleted file mode 100644
index 471958a..0000000
--- a/drivers/staging/comedi/drivers/dt9812.h
+++ /dev/null
@@ -1,210 +0,0 @@
-#ifndef __DT9812_H__
-#define __DT9812_H__
-
-#define DT9812_DIAGS_BOARD_INFO_ADDR        0xFBFF
-#define DT9812_MAX_WRITE_CMD_PIPE_SIZE      32
-#define DT9812_MAX_READ_CMD_PIPE_SIZE       32
-
-/*
- * See Silican Laboratories C8051F020/1/2/3 manual
- */
-#define F020_SFR_P4                       0x84
-#define F020_SFR_P1                       0x90
-#define F020_SFR_P2                       0xa0
-#define F020_SFR_P3                       0xb0
-#define F020_SFR_AMX0CF                   0xba
-#define F020_SFR_AMX0SL                   0xbb
-#define F020_SFR_ADC0CF                   0xbc
-#define F020_SFR_ADC0L                    0xbe
-#define F020_SFR_ADC0H                    0xbf
-#define F020_SFR_DAC0L                    0xd2
-#define F020_SFR_DAC0H                    0xd3
-#define F020_SFR_DAC0CN                   0xd4
-#define F020_SFR_DAC1L                    0xd5
-#define F020_SFR_DAC1H                    0xd6
-#define F020_SFR_DAC1CN                   0xd7
-#define F020_SFR_ADC0CN                   0xe8
-
-#define F020_MASK_ADC0CF_AMP0GN0          0x01
-#define F020_MASK_ADC0CF_AMP0GN1          0x02
-#define F020_MASK_ADC0CF_AMP0GN2          0x04
-
-#define F020_MASK_ADC0CN_AD0EN            0x80
-#define F020_MASK_ADC0CN_AD0INT           0x20
-#define F020_MASK_ADC0CN_AD0BUSY          0x10
-
-#define F020_MASK_DACxCN_DACxEN           0x80
-
-typedef enum {
-				/* A/D  D/A  DI  DO  CT */
-	DT9812_DEVID_DT9812_10,	/*  8    2   8   8   1  +/- 10V */
-	DT9812_DEVID_DT9812_2PT5,/* 8    2   8   8   1  0-2.44V */
-#if 0
-	DT9812_DEVID_DT9813,	/*  16   2   4   4   1  +/- 10V */
-	DT9812_DEVID_DT9814	/*  24   2   0   0   1  +/- 10V */
-#endif
-} dt9812_devid_t;
-
-typedef enum {
-	DT9812_GAIN_0PT25 = 1,
-	DT9812_GAIN_0PT5 = 2,
-	DT9812_GAIN_1 = 4,
-	DT9812_GAIN_2 = 8,
-	DT9812_GAIN_4 = 16,
-	DT9812_GAIN_8 = 32,
-	DT9812_GAIN_16 = 64,
-} dt9812_gain_t;
-
-typedef enum {
-	DT9812_LEAST_USB_FIRMWARE_CMD_CODE = 0,
-	/* Write Flash memory */
-	DT9812_W_FLASH_DATA = 0,
-	/* Read Flash memory misc config info */
-	DT9812_R_FLASH_DATA = 1,
-
-	/*
-	 * Register read/write commands for processor
-	 */
-
-	/* Read a single byte of USB memory */
-	DT9812_R_SINGLE_BYTE_REG = 2,
-	/* Write a single byte of USB memory */
-	DT9812_W_SINGLE_BYTE_REG = 3,
-	/* Multiple Reads of USB memory */
-	DT9812_R_MULTI_BYTE_REG = 4,
-	/* Multiple Writes of USB memory */
-	DT9812_W_MULTI_BYTE_REG = 5,
-	/* Read, (AND) with mask, OR value, then write (single) */
-	DT9812_RMW_SINGLE_BYTE_REG = 6,
-	/* Read, (AND) with mask, OR value, then write (multiple) */
-	DT9812_RMW_MULTI_BYTE_REG = 7,
-
-	/*
-	 * Register read/write commands for SMBus
-	 */
-
-	/* Read a single byte of SMBus */
-	DT9812_R_SINGLE_BYTE_SMBUS = 8,
-	/* Write a single byte of SMBus */
-	DT9812_W_SINGLE_BYTE_SMBUS = 9,
-	/* Multiple Reads of SMBus */
-	DT9812_R_MULTI_BYTE_SMBUS = 10,
-	/* Multiple Writes of SMBus */
-	DT9812_W_MULTI_BYTE_SMBUS = 11,
-
-	/*
-	 * Register read/write commands for a device
-	 */
-
-	/* Read a single byte of a device */
-	DT9812_R_SINGLE_BYTE_DEV = 12,
-	/* Write a single byte of a device */
-	DT9812_W_SINGLE_BYTE_DEV = 13,
-	/* Multiple Reads of a device */
-	DT9812_R_MULTI_BYTE_DEV = 14,
-	/* Multiple Writes of a device */
-	DT9812_W_MULTI_BYTE_DEV = 15,
-
-	/* Not sure if we'll need this */
-	DT9812_W_DAC_THRESHOLD = 16,
-
-	/* Set interrupt on change mask */
-	DT9812_W_INT_ON_CHANGE_MASK = 17,
-
-	/* Write (or Clear) the CGL for the ADC */
-	DT9812_W_CGL = 18,
-	/* Multiple Reads of USB memory */
-	DT9812_R_MULTI_BYTE_USBMEM = 19,
-	/* Multiple Writes to USB memory */
-	DT9812_W_MULTI_BYTE_USBMEM = 20,
-
-	/* Issue a start command to a given subsystem */
-	DT9812_START_SUBSYSTEM = 21,
-	/* Issue a stop command to a given subsystem */
-	DT9812_STOP_SUBSYSTEM = 22,
-
-	/* calibrate the board using CAL_POT_CMD */
-	DT9812_CALIBRATE_POT = 23,
-	/* set the DAC FIFO size */
-	DT9812_W_DAC_FIFO_SIZE = 24,
-	/* Write or Clear the CGL for the DAC */
-	DT9812_W_CGL_DAC = 25,
-	/* Read a single value from a subsystem */
-	DT9812_R_SINGLE_VALUE_CMD = 26,
-	/* Write a single value to a subsystem */
-	DT9812_W_SINGLE_VALUE_CMD = 27,
-	/* Valid DT9812_USB_FIRMWARE_CMD_CODE's will be less than this number */
-	DT9812_MAX_USB_FIRMWARE_CMD_CODE,
-} dt9812_usb_firmware_cmd_t;
-
-typedef struct {
-	u16 numbytes;
-	u16 address;
-} dt9812_flash_data_t;
-
-#define DT9812_MAX_NUM_MULTI_BYTE_RDS  \
-    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8))
-
-typedef struct {
-	u8 count;
-	u8 address[DT9812_MAX_NUM_MULTI_BYTE_RDS];
-} dt9812_read_multi_t;
-
-typedef struct {
-	u8 address;
-	u8 value;
-} dt9812_write_byte_t;
-
-#define DT9812_MAX_NUM_MULTI_BYTE_WRTS  \
-    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_write_byte_t))
-
-typedef struct {
-	u8 count;
-	dt9812_write_byte_t write[DT9812_MAX_NUM_MULTI_BYTE_WRTS];
-} dt9812_write_multi_t;
-
-typedef struct {
-	u8 address;
-	u8 and_mask;
-	u8 or_value;
-} dt9812_rmw_byte_t;
-
-#define DT9812_MAX_NUM_MULTI_BYTE_RMWS  \
-    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_rmw_byte_t))
-
-typedef struct {
-	u8 count;
-	dt9812_rmw_byte_t rmw[DT9812_MAX_NUM_MULTI_BYTE_RMWS];
-} dt9812_rmw_multi_t;
-
-typedef struct dt9812_usb_cmd {
-
-	u32 cmd;
-	union {
-		dt9812_flash_data_t flash_data_info;
-		dt9812_read_multi_t read_multi_info;
-		dt9812_write_multi_t write_multi_info;
-		dt9812_rmw_multi_t rmw_multi_info;
-	} u;
-#if 0
-	WRITE_BYTE_INFO WriteByteInfo;
-	READ_BYTE_INFO ReadByteInfo;
-	WRITE_MULTI_INFO WriteMultiInfo;
-	READ_MULTI_INFO ReadMultiInfo;
-	RMW_BYTE_INFO RMWByteInfo;
-	RMW_MULTI_INFO RMWMultiInfo;
-	DAC_THRESHOLD_INFO DacThresholdInfo;
-	INT_ON_CHANGE_MASK_INFO IntOnChangeMaskInfo;
-	CGL_INFO CglInfo;
-	SUBSYSTEM_INFO SubsystemInfo;
-	CAL_POT_CMD CalPotCmd;
-	WRITE_DEV_BYTE_INFO WriteDevByteInfo;
-	READ_DEV_BYTE_INFO ReadDevByteInfo;
-	WRITE_DEV_MULTI_INFO WriteDevMultiInfo;
-	READ_DEV_MULTI_INFO ReadDevMultiInfo;
-	READ_SINGLE_VALUE_INFO ReadSingleValueInfo;
-	WRITE_SINGLE_VALUE_INFO WriteSingleValueInfo;
-#endif
-} dt9812_usb_cmd_t;
-
-#endif